diff options
Diffstat (limited to 'Documentation/devicetree/bindings/gpio/gpio-twl4030.txt')
-rw-r--r-- | Documentation/devicetree/bindings/gpio/gpio-twl4030.txt | 29 |
1 files changed, 0 insertions, 29 deletions
diff --git a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt deleted file mode 100644 index 66788fda1db3..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt +++ /dev/null @@ -1,29 +0,0 @@ -twl4030 GPIO controller bindings - -Required properties: -- compatible: - - "ti,twl4030-gpio" for twl4030 GPIO controller -- #gpio-cells : Should be two. - - first cell is the pin number - - second cell is used to specify optional parameters (unused) -- gpio-controller : Marks the device node as a GPIO controller. -- #interrupt-cells : Should be 2. -- interrupt-controller: Mark the device node as an interrupt controller - The first cell is the GPIO number. - The second cell is not used. -- ti,use-leds : Enables LEDA and LEDB outputs if set -- ti,debounce : if n-th bit is set, debounces GPIO-n -- ti,mmc-cd : if n-th bit is set, GPIO-n controls VMMC(n+1) -- ti,pullups : if n-th bit is set, set a pullup on GPIO-n -- ti,pulldowns : if n-th bit is set, set a pulldown on GPIO-n - -Example: - -twl_gpio: gpio { - compatible = "ti,twl4030-gpio"; - #gpio-cells = <2>; - gpio-controller; - #interrupt-cells = <2>; - interrupt-controller; - ti,use-leds; -}; |