diff options
Diffstat (limited to 'Documentation/devicetree/bindings/gpio/gpio-davinci.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/gpio/gpio-davinci.txt | 167 |
1 files changed, 0 insertions, 167 deletions
diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt deleted file mode 100644 index 696ea46227d1..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt +++ /dev/null @@ -1,167 +0,0 @@ -Davinci/Keystone GPIO controller bindings - -Required Properties: -- compatible: should be "ti,dm6441-gpio": for Davinci da850 SoCs - "ti,keystone-gpio": for Keystone 2 66AK2H/K, 66AK2L, - 66AK2E SoCs - "ti,k2g-gpio", "ti,keystone-gpio": for 66AK2G - "ti,am654-gpio", "ti,keystone-gpio": for TI K3 AM654 - "ti,j721e-gpio", "ti,keystone-gpio": for J721E SoCs - "ti,am64-gpio", "ti,keystone-gpio": for AM64 SoCs - -- reg: Physical base address of the controller and the size of memory mapped - registers. - -- gpio-controller : Marks the device node as a gpio controller. - -- #gpio-cells : Should be two. - - first cell is the pin number - - second cell is used to specify optional parameters (unused) - -- interrupts: Array of GPIO interrupt number. Only banked or unbanked IRQs are - supported at a time. - -- ti,ngpio: The number of GPIO pins supported. - -- ti,davinci-gpio-unbanked: The number of GPIOs that have an individual interrupt - line to processor. - -- clocks: Should contain the device's input clock, and should be defined as per - the appropriate clock bindings consumer usage in, - - Documentation/devicetree/bindings/clock/keystone-gate.txt - for 66AK2HK/66AK2L/66AK2E SoCs or, - - Documentation/devicetree/bindings/clock/ti,sci-clk.txt - for 66AK2G SoCs - -- clock-names: Name should be "gpio"; - -Currently clock-names and clocks are needed for all keystone 2 platforms -Davinci platforms do not have DT clocks as of now. - -The GPIO controller also acts as an interrupt controller. It uses the default -two cells specifier as described in Documentation/devicetree/bindings/ -interrupt-controller/interrupts.txt. - -Example: - -gpio: gpio@1e26000 { - compatible = "ti,dm6441-gpio"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x226000 0x1000>; - interrupt-parent = <&intc>; - interrupts = <42 IRQ_TYPE_EDGE_BOTH 43 IRQ_TYPE_EDGE_BOTH - 44 IRQ_TYPE_EDGE_BOTH 45 IRQ_TYPE_EDGE_BOTH - 46 IRQ_TYPE_EDGE_BOTH 47 IRQ_TYPE_EDGE_BOTH - 48 IRQ_TYPE_EDGE_BOTH 49 IRQ_TYPE_EDGE_BOTH - 50 IRQ_TYPE_EDGE_BOTH>; - ti,ngpio = <144>; - ti,davinci-gpio-unbanked = <0>; - interrupt-controller; - #interrupt-cells = <2>; -}; - -leds { - compatible = "gpio-leds"; - - led1 { - label = "davinci:green:usr1"; - gpios = <&gpio 10 GPIO_ACTIVE_HIGH>; - ... - }; - - led2 { - label = "davinci:red:debug1"; - gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; - ... - }; -}; - -Example for 66AK2G: - -gpio0: gpio@2603000 { - compatible = "ti,k2g-gpio", "ti,keystone-gpio"; - reg = <0x02603000 0x100>; - gpio-controller; - #gpio-cells = <2>; - interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 434 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 437 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 438 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 439 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 440 IRQ_TYPE_EDGE_RISING>; - interrupt-controller; - #interrupt-cells = <2>; - ti,ngpio = <144>; - ti,davinci-gpio-unbanked = <0>; - clocks = <&k2g_clks 0x001b 0x0>; - clock-names = "gpio"; -}; - -Example for 66AK2HK/66AK2L/66AK2E: - -gpio0: gpio@260bf00 { - compatible = "ti,keystone-gpio"; - reg = <0x0260bf00 0x100>; - gpio-controller; - #gpio-cells = <2>; - /* HW Interrupts mapped to GPIO pins */ - interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 121 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 124 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 147 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkgpio>; - clock-names = "gpio"; - ti,ngpio = <32>; - ti,davinci-gpio-unbanked = <32>; -}; - -Example for K3 AM654: - -wkup_gpio0: wkup_gpio0@42110000 { - compatible = "ti,am654-gpio", "ti,keystone-gpio"; - reg = <0x42110000 0x100>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&intr_wkup_gpio>; - interrupts = <59 128>, <59 129>, <59 130>, <59 131>; - interrupt-controller; - #interrupt-cells = <2>; - ti,ngpio = <56>; - ti,davinci-gpio-unbanked = <0>; - clocks = <&k3_clks 59 0>; - clock-names = "gpio"; -}; |