diff options
Diffstat (limited to 'Documentation/devicetree/bindings/gpio/gpio-axp209.txt')
-rw-r--r-- | Documentation/devicetree/bindings/gpio/gpio-axp209.txt | 75 |
1 files changed, 0 insertions, 75 deletions
diff --git a/Documentation/devicetree/bindings/gpio/gpio-axp209.txt b/Documentation/devicetree/bindings/gpio/gpio-axp209.txt deleted file mode 100644 index fc42b2caa06d..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-axp209.txt +++ /dev/null @@ -1,75 +0,0 @@ -AXP209 GPIO & pinctrl controller - -This driver follows the usual GPIO bindings found in -Documentation/devicetree/bindings/gpio/gpio.txt - -This driver follows the usual pinctrl bindings found in -Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - -This driver employs the per-pin muxing pattern. - -Required properties: -- compatible: Should be one of: - - "x-powers,axp209-gpio" - - "x-powers,axp813-gpio" -- #gpio-cells: Should be two. The first cell is the pin number and the - second is the GPIO flags. -- gpio-controller: Marks the device node as a GPIO controller. - -This node must be a subnode of the axp20x PMIC, documented in -Documentation/devicetree/bindings/mfd/axp20x.txt - -Example: - -axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <1>; - - axp_gpio: gpio { - compatible = "x-powers,axp209-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; -}; - -The GPIOs can be muxed to other functions and therefore, must be a subnode of -axp_gpio. - -Example: - -&axp_gpio { - gpio0_adc: gpio0-adc { - pins = "GPIO0"; - function = "adc"; - }; -}; - -&example_node { - pinctrl-names = "default"; - pinctrl-0 = <&gpio0_adc>; -}; - -GPIOs and their functions -------------------------- - -Each GPIO is independent from the other (i.e. GPIO0 in gpio_in function does -not force GPIO1 and GPIO2 to be in gpio_in function as well). - -axp209 ------- -GPIO | Functions ------------------------- -GPIO0 | gpio_in, gpio_out, ldo, adc -GPIO1 | gpio_in, gpio_out, ldo, adc -GPIO2 | gpio_in, gpio_out - -axp813 ------- -GPIO | Functions ------------------------- -GPIO0 | gpio_in, gpio_out, ldo, adc -GPIO1 | gpio_in, gpio_out, ldo |