1 files changed, 0 insertions, 60 deletions
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt
deleted file mode 100644
index 9b151c5b0c90..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-* Rockchip RK3308 Clock and Reset Unit
-
-The RK3308 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: CRU should be "rockchip,rk3308-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing, pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3308-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "mclk_i2s0_8ch_in", "mclk_i2s1_8ch_in", "mclk_i2s2_8ch_in",
-   "mclk_i2s3_8ch_in", "mclk_i2s0_2ch_in",
-   "mclk_i2s1_2ch_in" - external I2S or SPDIF clock - optional,
- - "mac_clkin" - external MAC clock - optional
-
-Example: Clock controller node:
-
-	cru: clock-controller@ff500000 {
-		compatible = "rockchip,rk3308-cru";
-		reg = <0x0 0xff500000 0x0 0x1000>;
-		rockchip,grf = <&grf>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@ff0a0000 {
-		compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart";
-		reg = <0x0 0xff0a0000 0x0 0x100>;
-		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
-		clock-names = "baudclk", "apb_pclk";
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		status = "disabled";
-	};