summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/bus/moxtet.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/bus/moxtet.txt')
-rw-r--r--Documentation/devicetree/bindings/bus/moxtet.txt46
1 files changed, 46 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/bus/moxtet.txt b/Documentation/devicetree/bindings/bus/moxtet.txt
new file mode 100644
index 000000000000..fb50fc865336
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/moxtet.txt
@@ -0,0 +1,46 @@
+Turris Mox module status and configuration bus (over SPI)
+
+Required properties:
+ - compatible : Should be "cznic,moxtet"
+ - #address-cells : Has to be 1
+ - #size-cells : Has to be 0
+ - spi-cpol : Required inverted clock polarity
+ - spi-cpha : Required shifted clock phase
+ - interrupts : Must contain reference to the shared interrupt line
+ - interrupt-controller : Required
+ - #interrupt-cells : Has to be 1
+
+For other required and optional properties of SPI slave nodes please refer to
+../spi/spi-bus.txt.
+
+Required properties of subnodes:
+ - reg : Should be position on the Moxtet bus (how many Moxtet
+ modules are between this module and CPU module, so
+ either 0 or a positive integer)
+
+The driver finds the devices connected to the bus by itself, but it may be
+needed to reference some of them from other parts of the device tree. In that
+case the devices can be defined as subnodes of the moxtet node.
+
+Example:
+
+ moxtet@1 {
+ compatible = "cznic,moxtet";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ spi-max-frequency = <10000000>;
+ spi-cpol;
+ spi-cpha;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gpiosb>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+
+ moxtet_sfp: gpio@0 {
+ compatible = "cznic,moxtet-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0>;
+ }
+ };