summaryrefslogtreecommitdiffstats
path: root/Documentation/RCU/torture.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/RCU/torture.txt')
-rw-r--r--Documentation/RCU/torture.txt147
1 files changed, 140 insertions, 7 deletions
diff --git a/Documentation/RCU/torture.txt b/Documentation/RCU/torture.txt
index a41a0384d20c..af712a3c5b6a 100644
--- a/Documentation/RCU/torture.txt
+++ b/Documentation/RCU/torture.txt
@@ -124,9 +124,14 @@ using a dynamically allocated srcu_struct (hence "srcud-" rather than
debugging. The final "T" entry contains the totals of the counters.
-USAGE
+USAGE ON SPECIFIC KERNEL BUILDS
-The following script may be used to torture RCU:
+It is sometimes desirable to torture RCU on a specific kernel build,
+for example, when preparing to put that kernel build into production.
+In that case, the kernel should be built with CONFIG_RCU_TORTURE_TEST=m
+so that the test can be started using modprobe and terminated using rmmod.
+
+For example, the following script may be used to torture RCU:
#!/bin/sh
@@ -142,8 +147,136 @@ checked for such errors. The "rmmod" command forces a "SUCCESS",
two are self-explanatory, while the last indicates that while there
were no RCU failures, CPU-hotplug problems were detected.
-However, the tools/testing/selftests/rcutorture/bin/kvm.sh script
-provides better automation, including automatic failure analysis.
-It assumes a qemu/kvm-enabled platform, and runs guest OSes out of initrd.
-See tools/testing/selftests/rcutorture/doc/initrd.txt for instructions
-on setting up such an initrd.
+
+USAGE ON MAINLINE KERNELS
+
+When using rcutorture to test changes to RCU itself, it is often
+necessary to build a number of kernels in order to test that change
+across a broad range of combinations of the relevant Kconfig options
+and of the relevant kernel boot parameters. In this situation, use
+of modprobe and rmmod can be quite time-consuming and error-prone.
+
+Therefore, the tools/testing/selftests/rcutorture/bin/kvm.sh
+script is available for mainline testing for x86, arm64, and
+powerpc. By default, it will run the series of tests specified by
+tools/testing/selftests/rcutorture/configs/rcu/CFLIST, with each test
+running for 30 minutes within a guest OS using a minimal userspace
+supplied by an automatically generated initrd. After the tests are
+complete, the resulting build products and console output are analyzed
+for errors and the results of the runs are summarized.
+
+On larger systems, rcutorture testing can be accelerated by passing the
+--cpus argument to kvm.sh. For example, on a 64-CPU system, "--cpus 43"
+would use up to 43 CPUs to run tests concurrently, which as of v5.4 would
+complete all the scenarios in two batches, reducing the time to complete
+from about eight hours to about one hour (not counting the time to build
+the sixteen kernels). The "--dryrun sched" argument will not run tests,
+but rather tell you how the tests would be scheduled into batches. This
+can be useful when working out how many CPUs to specify in the --cpus
+argument.
+
+Not all changes require that all scenarios be run. For example, a change
+to Tree SRCU might run only the SRCU-N and SRCU-P scenarios using the
+--configs argument to kvm.sh as follows: "--configs 'SRCU-N SRCU-P'".
+Large systems can run multiple copies of of the full set of scenarios,
+for example, a system with 448 hardware threads can run five instances
+of the full set concurrently. To make this happen:
+
+ kvm.sh --cpus 448 --configs '5*CFLIST'
+
+Alternatively, such a system can run 56 concurrent instances of a single
+eight-CPU scenario:
+
+ kvm.sh --cpus 448 --configs '56*TREE04'
+
+Or 28 concurrent instances of each of two eight-CPU scenarios:
+
+ kvm.sh --cpus 448 --configs '28*TREE03 28*TREE04'
+
+Of course, each concurrent instance will use memory, which can be
+limited using the --memory argument, which defaults to 512M. Small
+values for memory may require disabling the callback-flooding tests
+using the --bootargs parameter discussed below.
+
+Sometimes additional debugging is useful, and in such cases the --kconfig
+parameter to kvm.sh may be used, for example, "--kconfig 'CONFIG_KASAN=y'".
+
+Kernel boot arguments can also be supplied, for example, to control
+rcutorture's module parameters. For example, to test a change to RCU's
+CPU stall-warning code, use "--bootargs 'rcutorture.stall_cpu=30'".
+This will of course result in the scripting reporting a failure, namely
+the resuling RCU CPU stall warning. As noted above, reducing memory may
+require disabling rcutorture's callback-flooding tests:
+
+ kvm.sh --cpus 448 --configs '56*TREE04' --memory 128M \
+ --bootargs 'rcutorture.fwd_progress=0'
+
+Sometimes all that is needed is a full set of kernel builds. This is
+what the --buildonly argument does.
+
+Finally, the --trust-make argument allows each kernel build to reuse what
+it can from the previous kernel build.
+
+There are additional more arcane arguments that are documented in the
+source code of the kvm.sh script.
+
+If a run contains failures, the number of buildtime and runtime failures
+is listed at the end of the kvm.sh output, which you really should redirect
+to a file. The build products and console output of each run is kept in
+tools/testing/selftests/rcutorture/res in timestamped directories. A
+given directory can be supplied to kvm-find-errors.sh in order to have
+it cycle you through summaries of errors and full error logs. For example:
+
+ tools/testing/selftests/rcutorture/bin/kvm-find-errors.sh \
+ tools/testing/selftests/rcutorture/res/2020.01.20-15.54.23
+
+However, it is often more convenient to access the files directly.
+Files pertaining to all scenarios in a run reside in the top-level
+directory (2020.01.20-15.54.23 in the example above), while per-scenario
+files reside in a subdirectory named after the scenario (for example,
+"TREE04"). If a given scenario ran more than once (as in "--configs
+'56*TREE04'" above), the directories corresponding to the second and
+subsequent runs of that scenario include a sequence number, for example,
+"TREE04.2", "TREE04.3", and so on.
+
+The most frequently used file in the top-level directory is testid.txt.
+If the test ran in a git repository, then this file contains the commit
+that was tested and any uncommitted changes in diff format.
+
+The most frequently used files in each per-scenario-run directory are:
+
+.config: This file contains the Kconfig options.
+
+Make.out: This contains build output for a specific scenario.
+
+console.log: This contains the console output for a specific scenario.
+ This file may be examined once the kernel has booted, but
+ it might not exist if the build failed.
+
+vmlinux: This contains the kernel, which can be useful with tools like
+ objdump and gdb.
+
+A number of additional files are available, but are less frequently used.
+Many are intended for debugging of rcutorture itself or of its scripting.
+
+As of v5.4, a successful run with the default set of scenarios produces
+the following summary at the end of the run on a 12-CPU system:
+
+SRCU-N ------- 804233 GPs (148.932/s) [srcu: g10008272 f0x0 ]
+SRCU-P ------- 202320 GPs (37.4667/s) [srcud: g1809476 f0x0 ]
+SRCU-t ------- 1122086 GPs (207.794/s) [srcu: g0 f0x0 ]
+SRCU-u ------- 1111285 GPs (205.794/s) [srcud: g1 f0x0 ]
+TASKS01 ------- 19666 GPs (3.64185/s) [tasks: g0 f0x0 ]
+TASKS02 ------- 20541 GPs (3.80389/s) [tasks: g0 f0x0 ]
+TASKS03 ------- 19416 GPs (3.59556/s) [tasks: g0 f0x0 ]
+TINY01 ------- 836134 GPs (154.84/s) [rcu: g0 f0x0 ] n_max_cbs: 34198
+TINY02 ------- 850371 GPs (157.476/s) [rcu: g0 f0x0 ] n_max_cbs: 2631
+TREE01 ------- 162625 GPs (30.1157/s) [rcu: g1124169 f0x0 ]
+TREE02 ------- 333003 GPs (61.6672/s) [rcu: g2647753 f0x0 ] n_max_cbs: 35844
+TREE03 ------- 306623 GPs (56.782/s) [rcu: g2975325 f0x0 ] n_max_cbs: 1496497
+CPU count limited from 16 to 12
+TREE04 ------- 246149 GPs (45.5831/s) [rcu: g1695737 f0x0 ] n_max_cbs: 434961
+TREE05 ------- 314603 GPs (58.2598/s) [rcu: g2257741 f0x2 ] n_max_cbs: 193997
+TREE07 ------- 167347 GPs (30.9902/s) [rcu: g1079021 f0x0 ] n_max_cbs: 478732
+CPU count limited from 16 to 12
+TREE09 ------- 752238 GPs (139.303/s) [rcu: g13075057 f0x0 ] n_max_cbs: 99011