diff options
Diffstat (limited to 'Documentation/PCI/endpoint/pci-test-howto.rst')
| -rw-r--r-- | Documentation/PCI/endpoint/pci-test-howto.rst | 235 |
1 files changed, 235 insertions, 0 deletions
diff --git a/Documentation/PCI/endpoint/pci-test-howto.rst b/Documentation/PCI/endpoint/pci-test-howto.rst new file mode 100644 index 000000000000..909f770a07d6 --- /dev/null +++ b/Documentation/PCI/endpoint/pci-test-howto.rst @@ -0,0 +1,235 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================== +PCI Test User Guide +=================== + +:Author: Kishon Vijay Abraham I <kishon@ti.com> + +This document is a guide to help users use pci-epf-test function driver +and pci_endpoint_test host driver for testing PCI. The list of steps to +be followed in the host side and EP side is given below. + +Endpoint Device +=============== + +Endpoint Controller Devices +--------------------------- + +To find the list of endpoint controller devices in the system:: + + # ls /sys/class/pci_epc/ + 51000000.pcie_ep + +If PCI_ENDPOINT_CONFIGFS is enabled:: + + # ls /sys/kernel/config/pci_ep/controllers + 51000000.pcie_ep + + +Endpoint Function Drivers +------------------------- + +To find the list of endpoint function drivers in the system:: + + # ls /sys/bus/pci-epf/drivers + pci_epf_test + +If PCI_ENDPOINT_CONFIGFS is enabled:: + + # ls /sys/kernel/config/pci_ep/functions + pci_epf_test + + +Creating pci-epf-test Device +---------------------------- + +PCI endpoint function device can be created using the configfs. To create +pci-epf-test device, the following commands can be used:: + + # mount -t configfs none /sys/kernel/config + # cd /sys/kernel/config/pci_ep/ + # mkdir functions/pci_epf_test/func1 + +The "mkdir func1" above creates the pci-epf-test function device that will +be probed by pci_epf_test driver. + +The PCI endpoint framework populates the directory with the following +configurable fields:: + + # ls functions/pci_epf_test/func1 + baseclass_code interrupt_pin progif_code subsys_id + cache_line_size msi_interrupts revid subsys_vendorid + deviceid msix_interrupts subclass_code vendorid + +The PCI endpoint function driver populates these entries with default values +when the device is bound to the driver. The pci-epf-test driver populates +vendorid with 0xffff and interrupt_pin with 0x0001:: + + # cat functions/pci_epf_test/func1/vendorid + 0xffff + # cat functions/pci_epf_test/func1/interrupt_pin + 0x0001 + + +Configuring pci-epf-test Device +------------------------------- + +The user can configure the pci-epf-test device using configfs entry. In order +to change the vendorid and the number of MSI interrupts used by the function +device, the following commands can be used:: + + # echo 0x104c > functions/pci_epf_test/func1/vendorid + # echo 0xb500 > functions/pci_epf_test/func1/deviceid + # echo 16 > functions/pci_epf_test/func1/msi_interrupts + # echo 8 > functions/pci_epf_test/func1/msix_interrupts + + +Binding pci-epf-test Device to EP Controller +-------------------------------------------- + +In order for the endpoint function device to be useful, it has to be bound to +a PCI endpoint controller driver. Use the configfs to bind the function +device to one of the controller driver present in the system:: + + # ln -s functions/pci_epf_test/func1 controllers/51000000.pcie_ep/ + +Once the above step is completed, the PCI endpoint is ready to establish a link +with the host. + + +Start the Link +-------------- + +In order for the endpoint device to establish a link with the host, the _start_ +field should be populated with '1':: + + # echo 1 > controllers/51000000.pcie_ep/start + + +RootComplex Device +================== + +lspci Output +------------ + +Note that the devices listed here correspond to the value populated in 1.4 +above:: + + 00:00.0 PCI bridge: Texas Instruments Device 8888 (rev 01) + 01:00.0 Unassigned class [ff00]: Texas Instruments Device b500 + + +Using Endpoint Test function Device +----------------------------------- + +pcitest.sh added in tools/pci/ can be used to run all the default PCI endpoint +tests. To compile this tool the following commands should be used:: + + # cd <kernel-dir> + # make -C tools/pci + +or if you desire to compile and install in your system:: + + # cd <kernel-dir> + # make -C tools/pci install + +The tool and script will be located in <rootfs>/usr/bin/ + + +pcitest.sh Output +~~~~~~~~~~~~~~~~~ +:: + + # pcitest.sh + BAR tests + + BAR0: OKAY + BAR1: OKAY + BAR2: OKAY + BAR3: OKAY + BAR4: NOT OKAY + BAR5: NOT OKAY + + Interrupt tests + + SET IRQ TYPE TO LEGACY: OKAY + LEGACY IRQ: NOT OKAY + SET IRQ TYPE TO MSI: OKAY + MSI1: OKAY + MSI2: OKAY + MSI3: OKAY + MSI4: OKAY + MSI5: OKAY + MSI6: OKAY + MSI7: OKAY + MSI8: OKAY + MSI9: OKAY + MSI10: OKAY + MSI11: OKAY + MSI12: OKAY + MSI13: OKAY + MSI14: OKAY + MSI15: OKAY + MSI16: OKAY + MSI17: NOT OKAY + MSI18: NOT OKAY + MSI19: NOT OKAY + MSI20: NOT OKAY + MSI21: NOT OKAY + MSI22: NOT OKAY + MSI23: NOT OKAY + MSI24: NOT OKAY + MSI25: NOT OKAY + MSI26: NOT OKAY + MSI27: NOT OKAY + MSI28: NOT OKAY + MSI29: NOT OKAY + MSI30: NOT OKAY + MSI31: NOT OKAY + MSI32: NOT OKAY + SET IRQ TYPE TO MSI-X: OKAY + MSI-X1: OKAY + MSI-X2: OKAY + MSI-X3: OKAY + MSI-X4: OKAY + MSI-X5: OKAY + MSI-X6: OKAY + MSI-X7: OKAY + MSI-X8: OKAY + MSI-X9: NOT OKAY + MSI-X10: NOT OKAY + MSI-X11: NOT OKAY + MSI-X12: NOT OKAY + MSI-X13: NOT OKAY + MSI-X14: NOT OKAY + MSI-X15: NOT OKAY + MSI-X16: NOT OKAY + [...] + MSI-X2047: NOT OKAY + MSI-X2048: NOT OKAY + + Read Tests + + SET IRQ TYPE TO MSI: OKAY + READ ( 1 bytes): OKAY + READ ( 1024 bytes): OKAY + READ ( 1025 bytes): OKAY + READ (1024000 bytes): OKAY + READ (1024001 bytes): OKAY + + Write Tests + + WRITE ( 1 bytes): OKAY + WRITE ( 1024 bytes): OKAY + WRITE ( 1025 bytes): OKAY + WRITE (1024000 bytes): OKAY + WRITE (1024001 bytes): OKAY + + Copy Tests + + COPY ( 1 bytes): OKAY + COPY ( 1024 bytes): OKAY + COPY ( 1025 bytes): OKAY + COPY (1024000 bytes): OKAY + COPY (1024001 bytes): OKAY |