summaryrefslogtreecommitdiffstats
path: root/Documentation/ABI
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/ABI')
-rw-r--r--Documentation/ABI/obsolete/sysfs-selinux-checkreqprot2
-rw-r--r--Documentation/ABI/stable/sysfs-bus-mhi21
-rw-r--r--Documentation/ABI/stable/sysfs-kernel-notes5
-rw-r--r--Documentation/ABI/testing/sysfs-bus-dfl15
-rw-r--r--Documentation/ABI/testing/sysfs-bus-fsi8
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio90
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-accel-adxl3727
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc20109
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-light-tsl277213
-rw-r--r--Documentation/ABI/testing/sysfs-bus-mei7
-rw-r--r--Documentation/ABI/testing/sysfs-bus-soundwire-slave18
-rw-r--r--Documentation/ABI/testing/sysfs-driver-habanalabs18
-rw-r--r--Documentation/ABI/testing/sysfs-driver-intel-m10-bmc15
-rw-r--r--Documentation/ABI/testing/sysfs-driver-w1_therm51
-rw-r--r--Documentation/ABI/testing/sysfs-platform-dptf16
15 files changed, 263 insertions, 32 deletions
diff --git a/Documentation/ABI/obsolete/sysfs-selinux-checkreqprot b/Documentation/ABI/obsolete/sysfs-selinux-checkreqprot
index 49ed9c8fd1e5..ed6b52ca210f 100644
--- a/Documentation/ABI/obsolete/sysfs-selinux-checkreqprot
+++ b/Documentation/ABI/obsolete/sysfs-selinux-checkreqprot
@@ -15,7 +15,7 @@ Description:
actual protection), and Android and Linux distributions have been
explicitly writing a "0" to /sys/fs/selinux/checkreqprot during
initialization for some time. Support for setting checkreqprot to 1
- will be removed in a future kernel release, at which point the kernel
+ will be removed no sooner than June 2021, at which point the kernel
will always cease using checkreqprot internally and will always
check the actual protections being applied upon mmap/mprotect calls.
The checkreqprot selinuxfs node will remain for backward compatibility
diff --git a/Documentation/ABI/stable/sysfs-bus-mhi b/Documentation/ABI/stable/sysfs-bus-mhi
new file mode 100644
index 000000000000..ecfe7662f8d0
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-bus-mhi
@@ -0,0 +1,21 @@
+What: /sys/bus/mhi/devices/.../serialnumber
+Date: Sept 2020
+KernelVersion: 5.10
+Contact: Bhaumik Bhatt <bbhatt@codeaurora.org>
+Description: The file holds the serial number of the client device obtained
+ using a BHI (Boot Host Interface) register read after at least
+ one attempt to power up the device has been done. If read
+ without having the device power on at least once, the file will
+ read all 0's.
+Users: Any userspace application or clients interested in device info.
+
+What: /sys/bus/mhi/devices/.../oem_pk_hash
+Date: Sept 2020
+KernelVersion: 5.10
+Contact: Bhaumik Bhatt <bbhatt@codeaurora.org>
+Description: The file holds the OEM PK Hash value of the endpoint device
+ obtained using a BHI (Boot Host Interface) register read after
+ at least one attempt to power up the device has been done. If
+ read without having the device power on at least once, the file
+ will read all 0's.
+Users: Any userspace application or clients interested in device info.
diff --git a/Documentation/ABI/stable/sysfs-kernel-notes b/Documentation/ABI/stable/sysfs-kernel-notes
new file mode 100644
index 000000000000..2c76ee9e67f7
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-kernel-notes
@@ -0,0 +1,5 @@
+What: /sys/kernel/notes
+Date: July 2009
+Contact: <linux-kernel@vger.kernel.org>
+Description: The /sys/kernel/notes file contains the binary representation
+ of the running vmlinux's .notes section.
diff --git a/Documentation/ABI/testing/sysfs-bus-dfl b/Documentation/ABI/testing/sysfs-bus-dfl
new file mode 100644
index 000000000000..23543be904f2
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-dfl
@@ -0,0 +1,15 @@
+What: /sys/bus/dfl/devices/dfl_dev.X/type
+Date: Aug 2020
+KernelVersion: 5.10
+Contact: Xu Yilun <yilun.xu@intel.com>
+Description: Read-only. It returns type of DFL FIU of the device. Now DFL
+ supports 2 FIU types, 0 for FME, 1 for PORT.
+ Format: 0x%x
+
+What: /sys/bus/dfl/devices/dfl_dev.X/feature_id
+Date: Aug 2020
+KernelVersion: 5.10
+Contact: Xu Yilun <yilun.xu@intel.com>
+Description: Read-only. It returns feature identifier local to its DFL FIU
+ type.
+ Format: 0x%x
diff --git a/Documentation/ABI/testing/sysfs-bus-fsi b/Documentation/ABI/testing/sysfs-bus-fsi
index 320697bdf41d..d148214181a1 100644
--- a/Documentation/ABI/testing/sysfs-bus-fsi
+++ b/Documentation/ABI/testing/sysfs-bus-fsi
@@ -36,3 +36,11 @@ Contact: linux-fsi@lists.ozlabs.org
Description:
Provides a means of reading/writing a 32 bit value from/to a
specified FSI bus address.
+
+What: /sys/bus/platform/devices/../cfam_reset
+Date: Sept 2020
+KernelVersion: 5.10
+Contact: linux-fsi@lists.ozlabs.org
+Description:
+ Provides a means of resetting the cfam that is attached to the
+ FSI device.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 5c62bfb0f3f5..a9d51810a3ba 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -40,6 +40,7 @@ Description:
buffered samples and events for device X.
What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency
+What: /sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency
What: /sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency
What: /sys/bus/iio/devices/triggerX/sampling_frequency
KernelVersion: 2.6.35
@@ -49,12 +50,13 @@ Description:
resulting sampling frequency. In many devices this
parameter has an effect on input filters etc. rather than
simply controlling when the input is sampled. As this
- effects data ready triggers, hardware buffers and the sysfs
+ affects data ready triggers, hardware buffers and the sysfs
direct access interfaces, it may be found in any of the
- relevant directories. If it effects all of the above
+ relevant directories. If it affects all of the above
then it is to be found in the base device directory.
What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency_available
+What: /sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency_available
What: /sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available
What: /sys/.../iio:deviceX/buffer/sampling_frequency_available
What: /sys/bus/iio/devices/triggerX/sampling_frequency_available
@@ -374,6 +376,9 @@ What: /sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale
What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_scale
What: /sys/bus/iio/devices/iio:deviceX/in_countY_scale
What: /sys/bus/iio/devices/iio:deviceX/in_angl_scale
+What: /sys/bus/iio/devices/iio:deviceX/in_intensity_x_scale
+What: /sys/bus/iio/devices/iio:deviceX/in_intensity_y_scale
+What: /sys/bus/iio/devices/iio:deviceX/in_intensity_z_scale
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
Description:
@@ -401,21 +406,21 @@ Description:
Hardware applied calibration offset (assumed to fix production
inaccuracies).
-What /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale
-What /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale
-What /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale
-What /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale
-What /sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale
-What /sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale
-What /sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale
-What /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale
-What /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale
-What /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale
-What /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale
-What /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale
-What /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale
-what /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale
-what /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale
+What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale
+What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale
+What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale
+What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale
+What: /sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale
+What: /sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale
+What: /sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale
+What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale
+What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale
+What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale
+What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale
+What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale
+What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale
+What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale
+What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale
What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_calibscale
What: /sys/bus/iio/devices/iio:deviceX/in_pressure_calibscale
What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_calibscale
@@ -483,7 +488,8 @@ Description:
If a discrete set of scale values is available, they
are listed in this attribute.
-What /sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain
+What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain
+What: /sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain
What: /sys/bus/iio/devices/iio:deviceX/in_intensity_red_hardwaregain
What: /sys/bus/iio/devices/iio:deviceX/in_intensity_green_hardwaregain
What: /sys/bus/iio/devices/iio:deviceX/in_intensity_blue_hardwaregain
@@ -494,6 +500,13 @@ Description:
Hardware applied gain factor. If shared across all channels,
<type>_hardwaregain is used.
+What: /sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain_available
+KernelVersion: 5.10
+Contact: linux-iio@vger.kernel.org
+Description:
+ Lists all available hardware applied gain factors. Shared across all
+ channels.
+
What: /sys/.../in_accel_filter_low_pass_3db_frequency
What: /sys/.../in_magn_filter_low_pass_3db_frequency
What: /sys/.../in_anglvel_filter_low_pass_3db_frequency
@@ -750,9 +763,9 @@ What: /sys/.../events/in_voltageY_raw_thresh_falling_value
What: /sys/.../events/in_tempY_raw_thresh_rising_value
What: /sys/.../events/in_tempY_raw_thresh_falling_value
What: /sys/.../events/in_illuminance0_thresh_falling_value
-what: /sys/.../events/in_illuminance0_thresh_rising_value
-what: /sys/.../events/in_proximity0_thresh_falling_value
-what: /sys/.../events/in_proximity0_thresh_rising_value
+What: /sys/.../events/in_illuminance0_thresh_rising_value
+What: /sys/.../events/in_proximity0_thresh_falling_value
+What: /sys/.../events/in_proximity0_thresh_rising_value
What: /sys/.../events/in_illuminance_thresh_rising_value
What: /sys/.../events/in_illuminance_thresh_falling_value
KernelVersion: 2.6.37
@@ -832,11 +845,11 @@ What: /sys/.../events/in_tempY_thresh_rising_hysteresis
What: /sys/.../events/in_tempY_thresh_falling_hysteresis
What: /sys/.../events/in_tempY_thresh_either_hysteresis
What: /sys/.../events/in_illuminance0_thresh_falling_hysteresis
-what: /sys/.../events/in_illuminance0_thresh_rising_hysteresis
-what: /sys/.../events/in_illuminance0_thresh_either_hysteresis
-what: /sys/.../events/in_proximity0_thresh_falling_hysteresis
-what: /sys/.../events/in_proximity0_thresh_rising_hysteresis
-what: /sys/.../events/in_proximity0_thresh_either_hysteresis
+What: /sys/.../events/in_illuminance0_thresh_rising_hysteresis
+What: /sys/.../events/in_illuminance0_thresh_either_hysteresis
+What: /sys/.../events/in_proximity0_thresh_falling_hysteresis
+What: /sys/.../events/in_proximity0_thresh_rising_hysteresis
+What: /sys/.../events/in_proximity0_thresh_either_hysteresis
KernelVersion: 3.13
Contact: linux-iio@vger.kernel.org
Description:
@@ -1013,7 +1026,7 @@ What: /sys/.../events/in_activity_running_thresh_falling_en
KernelVersion: 3.19
Contact: linux-iio@vger.kernel.org
Description:
- Enables or disables activitity events. Depending on direction
+ Enables or disables activity events. Depending on direction
an event is generated when sensor ENTERS or LEAVES a given state.
What: /sys/.../events/in_activity_still_thresh_rising_value
@@ -1333,6 +1346,7 @@ Description:
standardised CIE Erythemal Action Spectrum. UV index values range
from 0 (low) to >=11 (extreme).
+What: /sys/.../iio:deviceX/in_intensity_integration_time
What: /sys/.../iio:deviceX/in_intensity_red_integration_time
What: /sys/.../iio:deviceX/in_intensity_green_integration_time
What: /sys/.../iio:deviceX/in_intensity_blue_integration_time
@@ -1342,7 +1356,8 @@ KernelVersion: 3.12
Contact: linux-iio@vger.kernel.org
Description:
This attribute is used to get/set the integration time in
- seconds.
+ seconds. If shared across all channels of a given type,
+ <type>_integration_time is used.
What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_integration_time
KernelVersion: 4.0
@@ -1564,6 +1579,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_concentration_ethanol_raw
What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_ethanol_raw
What: /sys/bus/iio/devices/iio:deviceX/in_concentration_h2_raw
What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_h2_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_concentration_o2_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_o2_raw
What: /sys/bus/iio/devices/iio:deviceX/in_concentration_voc_raw
What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_voc_raw
KernelVersion: 4.3
@@ -1740,3 +1757,20 @@ KernelVersion: 5.5
Contact: linux-iio@vger.kernel.org
Description:
One of the following thermocouple types: B, E, J, K, N, R, S, T.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_temp_object_calibambient
+What: /sys/bus/iio/devices/iio:deviceX/in_tempX_object_calibambient
+KernelVersion: 5.10
+Contact: linux-iio@vger.kernel.org
+Description:
+ Calibrated ambient temperature for object temperature
+ calculation in milli degrees Celsius.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_intensity_x_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_intensity_y_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_intensity_z_raw
+KernelVersion: 5.10
+Contact: linux-iio@vger.kernel.org
+Description:
+ Unscaled light intensity according to CIE 1931/DIN 5033 color space.
+ Units after application of scale are nano nanowatts per square meter.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-accel-adxl372 b/Documentation/ABI/testing/sysfs-bus-iio-accel-adxl372
new file mode 100644
index 000000000000..47e34f865ca1
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-accel-adxl372
@@ -0,0 +1,7 @@
+What: /sys/bus/iio/devices/triggerX/name = "adxl372-devX-peak"
+KernelVersion:
+Contact: linux-iio@vger.kernel.org
+Description:
+ The adxl372 accelerometer kernel module provides an additional trigger,
+ which sets the device in a mode in which it will record only the peak acceleration
+ sensed over the set period of time in the events sysfs.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010 b/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010
new file mode 100644
index 000000000000..5b78af5f341d
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010
@@ -0,0 +1,9 @@
+What: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw
+What: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw_available
+KernelVersion: 5.3.8
+Contact: linux-iio@vger.kernel.org
+Description:
+ Controls the heater device within the humidity sensor to get
+ rid of excess condensation.
+
+ Valid control values are 0 = OFF, and 1 = ON.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-light-tsl2772 b/Documentation/ABI/testing/sysfs-bus-iio-light-tsl2772
new file mode 100644
index 000000000000..b2798b258bf7
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-light-tsl2772
@@ -0,0 +1,13 @@
+What: /sys/bus/iio/devices/device[n]/in_illuminance0_calibrate
+KernelVersion: 3.3-rc1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Causes an internal calibration of the als gain trim
+ value which is later used in calculating illuminance in lux.
+
+What: /sys/bus/iio/devices/device[n]/in_proximity0_calibrate
+KernelVersion: 3.3-rc1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Causes a recalculation and adjustment to the
+ proximity_thresh_rising_value.
diff --git a/Documentation/ABI/testing/sysfs-bus-mei b/Documentation/ABI/testing/sysfs-bus-mei
index 3d37e2796d5a..6e9a105fe5cb 100644
--- a/Documentation/ABI/testing/sysfs-bus-mei
+++ b/Documentation/ABI/testing/sysfs-bus-mei
@@ -41,6 +41,13 @@ Contact: Tomas Winkler <tomas.winkler@intel.com>
Description: Stores mei client fixed address, if any
Format: %d
+What: /sys/bus/mei/devices/.../vtag
+Date: Nov 2020
+KernelVersion: 5.9
+Contact: Tomas Winkler <tomas.winkler@intel.com>
+Description: Stores mei client vtag support status
+ Format: %d
+
What: /sys/bus/mei/devices/.../max_len
Date: Nov 2019
KernelVersion: 5.5
diff --git a/Documentation/ABI/testing/sysfs-bus-soundwire-slave b/Documentation/ABI/testing/sysfs-bus-soundwire-slave
index db4c9511d1aa..d324aa0b678f 100644
--- a/Documentation/ABI/testing/sysfs-bus-soundwire-slave
+++ b/Documentation/ABI/testing/sysfs-bus-soundwire-slave
@@ -1,3 +1,21 @@
+What: /sys/bus/soundwire/devices/sdw:.../status
+ /sys/bus/soundwire/devices/sdw:.../device_number
+
+Date: September 2020
+
+Contact: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
+ Bard Liao <yung-chuan.liao@linux.intel.com>
+ Vinod Koul <vkoul@kernel.org>
+
+Description: SoundWire Slave status
+
+ These properties report the Slave status, e.g. if it
+ is UNATTACHED or not, and in the latter case show the
+ device_number. This status information is useful to
+ detect devices exposed by platform firmware but not
+ physically present on the bus, and conversely devices
+ not exposed in platform firmware but enumerated.
+
What: /sys/bus/soundwire/devices/sdw:.../dev-properties/mipi_revision
/sys/bus/soundwire/devices/sdw:.../dev-properties/wake_capable
/sys/bus/soundwire/devices/sdw:.../dev-properties/test_mode_capable
diff --git a/Documentation/ABI/testing/sysfs-driver-habanalabs b/Documentation/ABI/testing/sysfs-driver-habanalabs
index 1a14bf9b22ba..169ae4b2a180 100644
--- a/Documentation/ABI/testing/sysfs-driver-habanalabs
+++ b/Documentation/ABI/testing/sysfs-driver-habanalabs
@@ -2,13 +2,17 @@ What: /sys/class/habanalabs/hl<n>/armcp_kernel_ver
Date: Jan 2019
KernelVersion: 5.1
Contact: oded.gabbay@gmail.com
-Description: Version of the Linux kernel running on the device's CPU
+Description: Version of the Linux kernel running on the device's CPU.
+ Will be DEPRECATED in Linux kernel version 5.10, and be
+ replaced with cpucp_kernel_ver
What: /sys/class/habanalabs/hl<n>/armcp_ver
Date: Jan 2019
KernelVersion: 5.1
Contact: oded.gabbay@gmail.com
Description: Version of the application running on the device's CPU
+ Will be DEPRECATED in Linux kernel version 5.10, and be
+ replaced with cpucp_ver
What: /sys/class/habanalabs/hl<n>/clk_max_freq_mhz
Date: Jun 2019
@@ -33,6 +37,18 @@ KernelVersion: 5.1
Contact: oded.gabbay@gmail.com
Description: Version of the Device's CPLD F/W
+What: /sys/class/habanalabs/hl<n>/cpucp_kernel_ver
+Date: Oct 2020
+KernelVersion: 5.10
+Contact: oded.gabbay@gmail.com
+Description: Version of the Linux kernel running on the device's CPU
+
+What: /sys/class/habanalabs/hl<n>/cpucp_ver
+Date: Oct 2020
+KernelVersion: 5.10
+Contact: oded.gabbay@gmail.com
+Description: Version of the application running on the device's CPU
+
What: /sys/class/habanalabs/hl<n>/device_type
Date: Jan 2019
KernelVersion: 5.1
diff --git a/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
new file mode 100644
index 000000000000..979a2d62513f
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
@@ -0,0 +1,15 @@
+What: /sys/bus/spi/devices/.../bmc_version
+Date: June 2020
+KernelVersion: 5.10
+Contact: Xu Yilun <yilun.xu@intel.com>
+Description: Read only. Returns the hardware build version of Intel
+ MAX10 BMC chip.
+ Format: "0x%x".
+
+What: /sys/bus/spi/devices/.../bmcfw_version
+Date: June 2020
+KernelVersion: 5.10
+Contact: Xu Yilun <yilun.xu@intel.com>
+Description: Read only. Returns the firmware version of Intel MAX10
+ BMC chip.
+ Format: "0x%x".
diff --git a/Documentation/ABI/testing/sysfs-driver-w1_therm b/Documentation/ABI/testing/sysfs-driver-w1_therm
index 9b488c0afdfa..8873bbb075cb 100644
--- a/Documentation/ABI/testing/sysfs-driver-w1_therm
+++ b/Documentation/ABI/testing/sysfs-driver-w1_therm
@@ -49,10 +49,13 @@ Description:
will be changed only in device RAM, so it will be cleared when
power is lost. Trigger a 'save' to EEPROM command to keep
values after power-on. Read or write are :
- * '9..12': device resolution in bit
+ * '9..14': device resolution in bit
or resolution to set in bit
* '-xx': xx is kernel error when reading the resolution
* Anything else: do nothing
+ Some DS18B20 clones are fixed in 12-bit resolution, so the
+ actual resolution is read back from the chip and verified. Error
+ is reported if the results differ.
Users: any user space application which wants to communicate with
w1_term device
@@ -86,7 +89,7 @@ Description:
*write* :
* '0' : save the 2 or 3 bytes to the device EEPROM
(i.e. TH, TL and config register)
- * '9..12' : set the device resolution in RAM
+ * '9..14' : set the device resolution in RAM
(if supported)
* Anything else: do nothing
refer to Documentation/w1/slaves/w1_therm.rst for detailed
@@ -114,3 +117,47 @@ Description:
of the bulk read command (not the current temperature).
Users: any user space application which wants to communicate with
w1_term device
+
+
+What: /sys/bus/w1/devices/.../conv_time
+Date: July 2020
+Contact: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru>
+Description:
+ (RW) Get, set, or measure a temperature conversion time. The
+ setting remains active until a resolution change. Then it is
+ reset to default (datasheet) conversion time for a new
+ resolution.
+
+ *read*: Actual conversion time in milliseconds. *write*:
+ '0': Set the default conversion time from the datasheet.
+ '1': Measure and set the conversion time. Make a single
+ temperature conversion, measure an actual value.
+ Increase it by 20% for temperature range. A new
+ conversion time can be obtained by reading this
+ same attribute.
+ other positive value:
+ Set the conversion time in milliseconds.
+
+Users: An application using the w1_term device
+
+
+What: /sys/bus/w1/devices/.../features
+Date: July 2020
+Contact: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru>
+Description:
+ (RW) Control optional driver settings.
+ Bit masks to read/write (bitwise OR):
+
+ 1: Enable check for conversion success. If byte 6 of
+ scratchpad memory is 0xC after conversion, and
+ temperature reads 85.00 (powerup value) or 127.94
+ (insufficient power) - return a conversion error.
+
+ 2: Enable poll for conversion completion. Generate read cycles
+ after the conversion start and wait for 1's. In parasite
+ power mode this feature is not available.
+
+ *read*: Currently selected features.
+ *write*: Select features.
+
+Users: An application using the w1_term device
diff --git a/Documentation/ABI/testing/sysfs-platform-dptf b/Documentation/ABI/testing/sysfs-platform-dptf
index eeed81ca6949..2cbc660d163b 100644
--- a/Documentation/ABI/testing/sysfs-platform-dptf
+++ b/Documentation/ABI/testing/sysfs-platform-dptf
@@ -92,3 +92,19 @@ Contact: linux-acpi@vger.kernel.org
Description:
(RO) The battery discharge current capability obtained from battery fuel gauge in
milli Amps.
+
+What: /sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/freq_mhz_low_clock
+Date: November, 2020
+KernelVersion: v5.10
+Contact: linux-acpi@vger.kernel.org
+Description:
+ (RW) The PCH FIVR (Fully Integrated Voltage Regulator) switching frequency in MHz,
+ when FIVR clock is 19.2MHz or 24MHz.
+
+What: /sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/freq_mhz_high_clock
+Date: November, 2020
+KernelVersion: v5.10
+Contact: linux-acpi@vger.kernel.org
+Description:
+ (RW) The PCH FIVR (Fully Integrated Voltage Regulator) switching frequency in MHz,
+ when FIVR clock is 38.4MHz.
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-07 02:11:27 +0000