diff options
Diffstat (limited to 'Documentation/ABI/testing')
| -rw-r--r-- | Documentation/ABI/testing/dell-smbios-wmi | 41 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio | 7 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio-cros-ec | 10 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-thunderbolt | 48 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-devices-power | 20 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-driver-w1_ds28e17 | 21 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-fs-f2fs | 37 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-platform-dell-smbios | 21 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt | 11 |
9 files changed, 195 insertions, 21 deletions
diff --git a/Documentation/ABI/testing/dell-smbios-wmi b/Documentation/ABI/testing/dell-smbios-wmi new file mode 100644 index 000000000000..fc919ce16008 --- /dev/null +++ b/Documentation/ABI/testing/dell-smbios-wmi @@ -0,0 +1,41 @@ +What: /dev/wmi/dell-smbios +Date: November 2017 +KernelVersion: 4.15 +Contact: "Mario Limonciello" <mario.limonciello@dell.com> +Description: + Perform SMBIOS calls on supported Dell machines. + through the Dell ACPI-WMI interface. + + IOCTL's and buffer formats are defined in: + <uapi/linux/wmi.h> + + 1) To perform an SMBIOS call from userspace, you'll need to + first determine the minimum size of the calling interface + buffer for your machine. + Platforms that contain larger buffers can return larger + objects from the system firmware. + Commonly this size is either 4k or 32k. + + To determine the size of the buffer read() a u64 dword from + the WMI character device /dev/wmi/dell-smbios. + + 2) After you've determined the minimum size of the calling + interface buffer, you can allocate a structure that represents + the structure documented above. + + 3) In the 'length' object store the size of the buffer you + determined above and allocated. + + 4) In this buffer object, prepare as necessary for the SMBIOS + call you're interested in. Typically SMBIOS buffers have + "class", "select", and "input" defined to values that coincide + with the data you are interested in. + Documenting class/select/input values is outside of the scope + of this documentation. Check with the libsmbios project for + further documentation on these values. + + 6) Run the call by using ioctl() as described in the header. + + 7) The output will be returned in the buffer object. + + 8) Be sure to free up your allocated object. diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 7eead5f97e02..2e3f919485f4 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -522,6 +522,7 @@ Description: Specifies the output powerdown mode. DAC output stage is disconnected from the amplifier and 1kohm_to_gnd: connected to ground via an 1kOhm resistor, + 2.5kohm_to_gnd: connected to ground via a 2.5kOhm resistor, 6kohm_to_gnd: connected to ground via a 6kOhm resistor, 20kohm_to_gnd: connected to ground via a 20kOhm resistor, 90kohm_to_gnd: connected to ground via a 90kOhm resistor, @@ -1242,9 +1243,9 @@ What: /sys/.../iio:deviceX/in_distance_raw KernelVersion: 4.0 Contact: linux-iio@vger.kernel.org Description: - This attribute is used to read the distance covered by the user - since the last reboot while activated. Units after application - of scale are meters. + This attribute is used to read the measured distance to an object + or the distance covered by the user since the last reboot while + activated. Units after application of scale are meters. What: /sys/bus/iio/devices/iio:deviceX/store_eeprom KernelVersion: 3.4.0 diff --git a/Documentation/ABI/testing/sysfs-bus-iio-cros-ec b/Documentation/ABI/testing/sysfs-bus-iio-cros-ec index 297b9720f024..0e95c2ca105c 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-cros-ec +++ b/Documentation/ABI/testing/sysfs-bus-iio-cros-ec @@ -16,3 +16,13 @@ Description: the motion sensor is placed. For example, in a laptop a motion sensor can be located on the base or on the lid. Current valid values are 'base' and 'lid'. + +What: /sys/bus/iio/devices/iio:deviceX/id +Date: Septembre 2017 +KernelVersion: 4.14 +Contact: linux-iio@vger.kernel.org +Description: + This attribute is exposed by the CrOS EC legacy accelerometer + driver and represents the sensor ID as exposed by the EC. This + ID is used by the Android sensor service hardware abstraction + layer (sensor HAL) through the Android container on ChromeOS. diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt index 392bef5bd399..93798c02e28b 100644 --- a/Documentation/ABI/testing/sysfs-bus-thunderbolt +++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt @@ -110,3 +110,51 @@ Description: When new NVM image is written to the non-active NVM is directly the status value from the DMA configuration based mailbox before the device is power cycled. Writing 0 here clears the status. + +What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/key +Date: Jan 2018 +KernelVersion: 4.15 +Contact: thunderbolt-software@lists.01.org +Description: This contains name of the property directory the XDomain + service exposes. This entry describes the protocol in + question. Following directories are already reserved by + the Apple XDomain specification: + + network: IP/ethernet over Thunderbolt + targetdm: Target disk mode protocol over Thunderbolt + extdisp: External display mode protocol over Thunderbolt + +What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/modalias +Date: Jan 2018 +KernelVersion: 4.15 +Contact: thunderbolt-software@lists.01.org +Description: Stores the same MODALIAS value emitted by uevent for + the XDomain service. Format: tbtsvc:kSpNvNrN + +What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcid +Date: Jan 2018 +KernelVersion: 4.15 +Contact: thunderbolt-software@lists.01.org +Description: This contains XDomain protocol identifier the XDomain + service supports. + +What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcvers +Date: Jan 2018 +KernelVersion: 4.15 +Contact: thunderbolt-software@lists.01.org +Description: This contains XDomain protocol version the XDomain + service supports. + +What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcrevs +Date: Jan 2018 +KernelVersion: 4.15 +Contact: thunderbolt-software@lists.01.org +Description: This contains XDomain software version the XDomain + service supports. + +What: /sys/bus/thunderbolt/devices/<xdomain>.<service>/prtcstns +Date: Jan 2018 +KernelVersion: 4.15 +Contact: thunderbolt-software@lists.01.org +Description: This contains XDomain service specific settings as + bitmask. Format: %x diff --git a/Documentation/ABI/testing/sysfs-devices-power b/Documentation/ABI/testing/sysfs-devices-power index 676fdf5f2a99..80a00f7b6667 100644 --- a/Documentation/ABI/testing/sysfs-devices-power +++ b/Documentation/ABI/testing/sysfs-devices-power @@ -211,7 +211,9 @@ Description: device, after it has been suspended at run time, from a resume request to the moment the device will be ready to process I/O, in microseconds. If it is equal to 0, however, this means that - the PM QoS resume latency may be arbitrary. + the PM QoS resume latency may be arbitrary and the special value + "n/a" means that user space cannot accept any resume latency at + all for the given device. Not all drivers support this attribute. If it isn't supported, it is not present. @@ -258,19 +260,3 @@ Description: This attribute has no effect on system-wide suspend/resume and hibernation. - -What: /sys/devices/.../power/pm_qos_remote_wakeup -Date: September 2012 -Contact: Rafael J. Wysocki <rjw@rjwysocki.net> -Description: - The /sys/devices/.../power/pm_qos_remote_wakeup attribute - is used for manipulating the PM QoS "remote wakeup required" - flag. If set, this flag indicates to the kernel that the - device is a source of user events that have to be signaled from - its low-power states. - - Not all drivers support this attribute. If it isn't supported, - it is not present. - - This attribute has no effect on system-wide suspend/resume and - hibernation. diff --git a/Documentation/ABI/testing/sysfs-driver-w1_ds28e17 b/Documentation/ABI/testing/sysfs-driver-w1_ds28e17 new file mode 100644 index 000000000000..d301e7017afe --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-w1_ds28e17 @@ -0,0 +1,21 @@ +What: /sys/bus/w1/devices/19-<id>/speed +Date: Sep 2017 +KernelVersion: 4.14 +Contact: Jan Kandziora <jjj@gmx.de> +Description: When written, this file sets the I2C speed on the connected + DS28E17 chip. When read, it reads the current setting from + the DS28E17 chip. + Valid values: 100, 400, 900 [kBaud]. + Default 100, can be set by w1_ds28e17.speed= module parameter. +Users: w1_ds28e17 driver + +What: /sys/bus/w1/devices/19-<id>/stretch +Date: Sep 2017 +KernelVersion: 4.14 +Contact: Jan Kandziora <jjj@gmx.de> +Description: When written, this file sets the multiplier used to calculate + the busy timeout for I2C operations on the connected DS28E17 + chip. When read, returns the current setting. + Valid values: 1 to 9. + Default 1, can be set by w1_ds28e17.stretch= module parameter. +Users: w1_ds28e17 driver diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs index 11b7f4ebea7c..a7799c2fca28 100644 --- a/Documentation/ABI/testing/sysfs-fs-f2fs +++ b/Documentation/ABI/testing/sysfs-fs-f2fs @@ -51,6 +51,18 @@ Description: Controls the dirty page count condition for the in-place-update policies. +What: /sys/fs/f2fs/<disk>/min_hot_blocks +Date: March 2017 +Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> +Description: + Controls the dirty page count condition for redefining hot data. + +What: /sys/fs/f2fs/<disk>/min_ssr_sections +Date: October 2017 +Contact: "Chao Yu" <yuchao0@huawei.com> +Description: + Controls the fee section threshold to trigger SSR allocation. + What: /sys/fs/f2fs/<disk>/max_small_discards Date: November 2013 Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com> @@ -102,6 +114,12 @@ Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> Description: Controls the idle timing. +What: /sys/fs/f2fs/<disk>/iostat_enable +Date: August 2017 +Contact: "Chao Yu" <yuchao0@huawei.com> +Description: + Controls to enable/disable IO stat. + What: /sys/fs/f2fs/<disk>/ra_nid_pages Date: October 2015 Contact: "Chao Yu" <chao2.yu@samsung.com> @@ -122,6 +140,12 @@ Contact: "Shuoran Liu" <liushuoran@huawei.com> Description: Shows total written kbytes issued to disk. +What: /sys/fs/f2fs/<disk>/feature +Date: July 2017 +Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> +Description: + Shows all enabled features in current device. + What: /sys/fs/f2fs/<disk>/inject_rate Date: May 2016 Contact: "Sheng Yong" <shengyong1@huawei.com> @@ -138,7 +162,18 @@ What: /sys/fs/f2fs/<disk>/reserved_blocks Date: June 2017 Contact: "Chao Yu" <yuchao0@huawei.com> Description: - Controls current reserved blocks in system. + Controls target reserved blocks in system, the threshold + is soft, it could exceed current available user space. + +What: /sys/fs/f2fs/<disk>/current_reserved_blocks +Date: October 2017 +Contact: "Yunlong Song" <yunlong.song@huawei.com> +Contact: "Chao Yu" <yuchao0@huawei.com> +Description: + Shows current reserved blocks in system, it may be temporarily + smaller than target_reserved_blocks, but will gradually + increase to target_reserved_blocks when more free blocks are + freed by user later. What: /sys/fs/f2fs/<disk>/gc_urgent Date: August 2017 diff --git a/Documentation/ABI/testing/sysfs-platform-dell-smbios b/Documentation/ABI/testing/sysfs-platform-dell-smbios new file mode 100644 index 000000000000..205d3b6361e0 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-dell-smbios @@ -0,0 +1,21 @@ +What: /sys/devices/platform/<platform>/tokens/* +Date: November 2017 +KernelVersion: 4.15 +Contact: "Mario Limonciello" <mario.limonciello@dell.com> +Description: + A read-only description of Dell platform tokens + available on the machine. + + Each token attribute is available as a pair of + sysfs attributes readable by a process with + CAP_SYS_ADMIN. + + For example the token ID "5" would be available + as the following attributes: + + 0005_location + 0005_value + + Tokens will vary from machine to machine, and + only tokens available on that machine will be + displayed. diff --git a/Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt b/Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt new file mode 100644 index 000000000000..8af65059d519 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt @@ -0,0 +1,11 @@ +What: /sys/devices/platform/<platform>/force_power +Date: September 2017 +KernelVersion: 4.15 +Contact: "Mario Limonciello" <mario.limonciello@dell.com> +Description: + Modify the platform force power state, influencing + Thunderbolt controllers to turn on or off when no + devices are connected (write-only) + There are two available states: + * 0 -> Force power disabled + * 1 -> Force power enabled |