diff options
| -rw-r--r-- | Documentation/PCI/msi-howto.rst | 2 | ||||
| -rw-r--r-- | drivers/pci/controller/pcie-iproc.c | 24 | ||||
| -rw-r--r-- | drivers/pci/p2pdma.c | 3 | ||||
| -rw-r--r-- | drivers/pci/pcie/aer.c | 1 | ||||
| -rw-r--r-- | drivers/pci/pcie/err.c | 12 | ||||
| -rw-r--r-- | drivers/pci/quirks.c | 61 |
6 files changed, 65 insertions, 38 deletions
diff --git a/Documentation/PCI/msi-howto.rst b/Documentation/PCI/msi-howto.rst index 994cbb660ade..aa2046af69f7 100644 --- a/Documentation/PCI/msi-howto.rst +++ b/Documentation/PCI/msi-howto.rst @@ -283,5 +283,5 @@ or disabled (0). If 0 is found in any of the msi_bus files belonging to bridges between the PCI root and the device, MSIs are disabled. It is also worth checking the device driver to see whether it supports MSIs. -For example, it may contain calls to pci_irq_alloc_vectors() with the +For example, it may contain calls to pci_alloc_irq_vectors() with the PCI_IRQ_MSI or PCI_IRQ_MSIX flags. diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c index 0a468c73bae3..8c7f875acf7f 100644 --- a/drivers/pci/controller/pcie-iproc.c +++ b/drivers/pci/controller/pcie-iproc.c @@ -1588,6 +1588,30 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd802, DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd804, quirk_paxc_disable_msi_parsing); +static void quirk_paxc_bridge(struct pci_dev *pdev) +{ + /* + * The PCI config space is shared with the PAXC root port and the first + * Ethernet device. So, we need to workaround this by telling the PCI + * code that the bridge is not an Ethernet device. + */ + if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE) + pdev->class = PCI_CLASS_BRIDGE_PCI << 8; + + /* + * MPSS is not being set properly (as it is currently 0). This is + * because that area of the PCI config space is hard coded to zero, and + * is not modifiable by firmware. Set this to 2 (e.g., 512 byte MPS) + * so that the MPS can be set to the real max value. + */ + pdev->pcie_mpss = 2; +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16cd, quirk_paxc_bridge); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0, quirk_paxc_bridge); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd750, quirk_paxc_bridge); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd802, quirk_paxc_bridge); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd804, quirk_paxc_bridge); + MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>"); MODULE_DESCRIPTION("Broadcom iPROC PCIe common driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/pci/p2pdma.c b/drivers/pci/p2pdma.c index 0608aae72ccc..9a8a38384121 100644 --- a/drivers/pci/p2pdma.c +++ b/drivers/pci/p2pdma.c @@ -289,6 +289,9 @@ static const struct pci_p2pdma_whitelist_entry { /* Intel Xeon E7 v3/Xeon E5 v3/Core i7 */ {PCI_VENDOR_ID_INTEL, 0x2f00, REQ_SAME_HOST_BRIDGE}, {PCI_VENDOR_ID_INTEL, 0x2f01, REQ_SAME_HOST_BRIDGE}, + /* Intel SkyLake-E */ + {PCI_VENDOR_ID_INTEL, 0x2030, 0}, + {PCI_VENDOR_ID_INTEL, 0x2020, 0}, {} }; diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c index 1ca86f2e0166..4a818b07a1af 100644 --- a/drivers/pci/pcie/aer.c +++ b/drivers/pci/pcie/aer.c @@ -1445,6 +1445,7 @@ static int aer_probe(struct pcie_device *dev) return -ENOMEM; rpc->rpd = port; + INIT_KFIFO(rpc->aer_fifo); set_service_data(dev, rpc); status = devm_request_threaded_irq(device, dev->irq, aer_irq, aer_isr, diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c index b0e6048a9208..01dfc8bb7ca0 100644 --- a/drivers/pci/pcie/err.c +++ b/drivers/pci/pcie/err.c @@ -10,6 +10,8 @@ * Zhang Yanmin (yanmin.zhang@intel.com) */ +#define dev_fmt(fmt) "AER: " fmt + #include <linux/pci.h> #include <linux/module.h> #include <linux/kernel.h> @@ -61,10 +63,12 @@ static int report_error_detected(struct pci_dev *dev, * error callbacks of "any" device in the subtree, and will * exit in the disconnected error state. */ - if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) + if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) { vote = PCI_ERS_RESULT_NO_AER_DRIVER; - else + pci_info(dev, "can't recover (no error_detected callback)\n"); + } else { vote = PCI_ERS_RESULT_NONE; + } } else { err_handler = dev->driver->err_handler; vote = err_handler->error_detected(dev, state); @@ -233,12 +237,12 @@ void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state, pci_aer_clear_device_status(dev); pci_cleanup_aer_uncorrect_error_status(dev); - pci_info(dev, "AER: Device recovery successful\n"); + pci_info(dev, "device recovery successful\n"); return; failed: pci_uevent_ers(dev, PCI_ERS_RESULT_DISCONNECT); /* TODO: Should kernel panic here? */ - pci_info(dev, "AER: Device recovery failed\n"); + pci_info(dev, "device recovery failed\n"); } diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 4937a088d7d8..1ca383f7ece6 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1871,19 +1871,40 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm); +static void quirk_d3hot_delay(struct pci_dev *dev, unsigned int delay) +{ + if (dev->d3_delay >= delay) + return; + + dev->d3_delay = delay; + pci_info(dev, "extending delay after power-on from D3hot to %d msec\n", + dev->d3_delay); +} + static void quirk_radeon_pm(struct pci_dev *dev) { if (dev->subsystem_vendor == PCI_VENDOR_ID_APPLE && - dev->subsystem_device == 0x00e2) { - if (dev->d3_delay < 20) { - dev->d3_delay = 20; - pci_info(dev, "extending delay after power-on from D3 to %d msec\n", - dev->d3_delay); - } - } + dev->subsystem_device == 0x00e2) + quirk_d3hot_delay(dev, 20); } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x6741, quirk_radeon_pm); +/* + * Ryzen5/7 XHCI controllers fail upon resume from runtime suspend or s2idle. + * https://bugzilla.kernel.org/show_bug.cgi?id=205587 + * + * The kernel attempts to transition these devices to D3cold, but that seems + * to be ineffective on the platforms in question; the PCI device appears to + * remain on in D3hot state. The D3hot-to-D0 transition then requires an + * extended delay in order to succeed. + */ +static void quirk_ryzen_xhci_d3hot(struct pci_dev *dev) +{ + quirk_d3hot_delay(dev, 20); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15e0, quirk_ryzen_xhci_d3hot); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15e1, quirk_ryzen_xhci_d3hot); + #ifdef CONFIG_X86_IO_APIC static int dmi_disable_ioapicreroute(const struct dmi_system_id *d) { @@ -2381,32 +2402,6 @@ DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5719, quirk_brcm_5719_limit_mrrs); -#ifdef CONFIG_PCIE_IPROC_PLATFORM -static void quirk_paxc_bridge(struct pci_dev *pdev) -{ - /* - * The PCI config space is shared with the PAXC root port and the first - * Ethernet device. So, we need to workaround this by telling the PCI - * code that the bridge is not an Ethernet device. - */ - if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE) - pdev->class = PCI_CLASS_BRIDGE_PCI << 8; - - /* - * MPSS is not being set properly (as it is currently 0). This is - * because that area of the PCI config space is hard coded to zero, and - * is not modifiable by firmware. Set this to 2 (e.g., 512 byte MPS) - * so that the MPS can be set to the real max value. - */ - pdev->pcie_mpss = 2; -} -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16cd, quirk_paxc_bridge); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0, quirk_paxc_bridge); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd750, quirk_paxc_bridge); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd802, quirk_paxc_bridge); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd804, quirk_paxc_bridge); -#endif - /* * Originally in EDAC sources for i82875P: Intel tells BIOS developers to * hide device 6 which configures the overflow device access containing the |