summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_common.c30
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_main.c2
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c9
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_type.h4
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c102
-rw-r--r--drivers/net/hamradio/dmascc.c2
-rw-r--r--drivers/net/virtio_net.c6
-rw-r--r--tools/lib/bpf/Makefile4
8 files changed, 103 insertions, 56 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 4e35e7017f3d..2c19070d2a0b 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -79,16 +79,28 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
switch (hw->phy.media_type) {
case ixgbe_media_type_fiber:
- hw->mac.ops.check_link(hw, &speed, &link_up, false);
- /* if link is down, assume supported */
- if (link_up)
- supported = speed == IXGBE_LINK_SPEED_1GB_FULL ?
+ /* flow control autoneg black list */
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_X550EM_A_SFP:
+ case IXGBE_DEV_ID_X550EM_A_SFP_N:
+ supported = false;
+ break;
+ default:
+ hw->mac.ops.check_link(hw, &speed, &link_up, false);
+ /* if link is down, assume supported */
+ if (link_up)
+ supported = speed == IXGBE_LINK_SPEED_1GB_FULL ?
true : false;
- else
- supported = true;
+ else
+ supported = true;
+ }
+
break;
case ixgbe_media_type_backplane:
- supported = true;
+ if (hw->device_id == IXGBE_DEV_ID_X550EM_X_XFI)
+ supported = false;
+ else
+ supported = true;
break;
case ixgbe_media_type_copper:
/* only some copper devices support flow control autoneg */
@@ -111,6 +123,10 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
break;
}
+ if (!supported)
+ hw_dbg(hw, "Device %x does not support flow control autoneg\n",
+ hw->device_id);
+
return supported;
}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 0f867dcda65f..96606e3eb965 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -386,7 +386,7 @@ u32 ixgbe_read_reg(struct ixgbe_hw *hw, u32 reg)
if (ixgbe_removed(reg_addr))
return IXGBE_FAILED_READ_REG;
if (unlikely(hw->phy.nw_mng_if_sel &
- IXGBE_NW_MNG_IF_SEL_ENABLE_10_100M)) {
+ IXGBE_NW_MNG_IF_SEL_SGMII_ENABLE)) {
struct ixgbe_adapter *adapter;
int i;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
index 0760bd7eeb01..112d24c6c9ce 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -679,8 +679,9 @@ update_vlvfb:
static int ixgbe_set_vf_macvlan(struct ixgbe_adapter *adapter,
int vf, int index, unsigned char *mac_addr)
{
- struct list_head *pos;
struct vf_macvlans *entry;
+ struct list_head *pos;
+ int retval = 0;
if (index <= 1) {
list_for_each(pos, &adapter->vf_mvs.l) {
@@ -721,13 +722,15 @@ static int ixgbe_set_vf_macvlan(struct ixgbe_adapter *adapter,
if (!entry || !entry->free)
return -ENOSPC;
+ retval = ixgbe_add_mac_filter(adapter, mac_addr, vf);
+ if (retval < 0)
+ return retval;
+
entry->free = false;
entry->is_macvlan = true;
entry->vf = vf;
memcpy(entry->vf_macvlan, mac_addr, ETH_ALEN);
- ixgbe_add_mac_filter(adapter, mac_addr, vf);
-
return 0;
}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 9c2460c5ef1b..ffa0ee5cd0f5 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -3778,8 +3778,8 @@ struct ixgbe_info {
#define IXGBE_NW_MNG_IF_SEL_PHY_SPEED_1G BIT(19)
#define IXGBE_NW_MNG_IF_SEL_PHY_SPEED_2_5G BIT(20)
#define IXGBE_NW_MNG_IF_SEL_PHY_SPEED_10G BIT(21)
-#define IXGBE_NW_MNG_IF_SEL_ENABLE_10_100M BIT(23)
-#define IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE BIT(24)
+#define IXGBE_NW_MNG_IF_SEL_SGMII_ENABLE BIT(25)
+#define IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE BIT(24) /* X552 only */
#define IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT 3
#define IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD \
(0x1F << IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index 72d84a065e34..19fbb2f28ea4 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -1555,9 +1555,14 @@ static s32 ixgbe_restart_an_internal_phy_x550em(struct ixgbe_hw *hw)
**/
static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
{
+ struct ixgbe_mac_info *mac = &hw->mac;
s32 status;
u32 reg_val;
+ /* iXFI is only supported with X552 */
+ if (mac->type != ixgbe_mac_X550EM_x)
+ return IXGBE_ERR_LINK_SETUP;
+
/* Disable AN and force speed to 10G Serial. */
status = ixgbe_read_iosf_sb_reg_x550(hw,
IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
@@ -1874,8 +1879,10 @@ static s32 ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw,
else
force_speed = IXGBE_LINK_SPEED_1GB_FULL;
- /* If internal link mode is XFI, then setup XFI internal link. */
- if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
+ /* If X552 and internal link mode is XFI, then setup XFI internal link.
+ */
+ if (hw->mac.type == ixgbe_mac_X550EM_x &&
+ !(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
status = ixgbe_setup_ixfi_x550em(hw, &force_speed);
if (status)
@@ -2404,17 +2411,30 @@ static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw)
status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc);
/* Enable link status change alarm */
- status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK,
- MDIO_MMD_AN, &reg);
- if (status)
- return status;
- reg |= IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN;
+ /* Enable the LASI interrupts on X552 devices to receive notifications
+ * of the link configurations of the external PHY and correspondingly
+ * support the configuration of the internal iXFI link, since iXFI does
+ * not support auto-negotiation. This is not required for X553 devices
+ * having KR support, which performs auto-negotiations and which is used
+ * as the internal link to the external PHY. Hence adding a check here
+ * to avoid enabling LASI interrupts for X553 devices.
+ */
+ if (hw->mac.type != ixgbe_mac_x550em_a) {
+ status = hw->phy.ops.read_reg(hw,
+ IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK,
+ MDIO_MMD_AN, &reg);
+ if (status)
+ return status;
- status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK,
- MDIO_MMD_AN, reg);
- if (status)
- return status;
+ reg |= IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN;
+
+ status = hw->phy.ops.write_reg(hw,
+ IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK,
+ MDIO_MMD_AN, reg);
+ if (status)
+ return status;
+ }
/* Enable high temperature failure and global fault alarms */
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK,
@@ -2615,7 +2635,8 @@ static s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw)
if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
return IXGBE_ERR_CONFIG;
- if (hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE) {
+ if (!(hw->mac.type == ixgbe_mac_X550EM_x &&
+ !(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE))) {
speed = IXGBE_LINK_SPEED_10GB_FULL |
IXGBE_LINK_SPEED_1GB_FULL;
return ixgbe_setup_kr_speed_x550em(hw, speed);
@@ -2822,7 +2843,7 @@ static s32 ixgbe_setup_fc_x550em(struct ixgbe_hw *hw)
{
bool pause, asm_dir;
u32 reg_val;
- s32 rc;
+ s32 rc = 0;
/* Validate the requested mode */
if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
@@ -2865,32 +2886,37 @@ static s32 ixgbe_setup_fc_x550em(struct ixgbe_hw *hw)
return IXGBE_ERR_CONFIG;
}
- if (hw->device_id != IXGBE_DEV_ID_X550EM_X_KR &&
- hw->device_id != IXGBE_DEV_ID_X550EM_A_KR &&
- hw->device_id != IXGBE_DEV_ID_X550EM_A_KR_L)
- return 0;
-
- rc = hw->mac.ops.read_iosf_sb_reg(hw,
- IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
- IXGBE_SB_IOSF_TARGET_KR_PHY,
- &reg_val);
- if (rc)
- return rc;
-
- reg_val &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE |
- IXGBE_KRM_AN_CNTL_1_ASM_PAUSE);
- if (pause)
- reg_val |= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE;
- if (asm_dir)
- reg_val |= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE;
- rc = hw->mac.ops.write_iosf_sb_reg(hw,
- IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
- IXGBE_SB_IOSF_TARGET_KR_PHY,
- reg_val);
-
- /* This device does not fully support AN. */
- hw->fc.disable_fc_autoneg = true;
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_X550EM_X_KR:
+ case IXGBE_DEV_ID_X550EM_A_KR:
+ case IXGBE_DEV_ID_X550EM_A_KR_L:
+ rc = hw->mac.ops.read_iosf_sb_reg(hw,
+ IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY,
+ &reg_val);
+ if (rc)
+ return rc;
+ reg_val &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE |
+ IXGBE_KRM_AN_CNTL_1_ASM_PAUSE);
+ if (pause)
+ reg_val |= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE;
+ if (asm_dir)
+ reg_val |= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE;
+ rc = hw->mac.ops.write_iosf_sb_reg(hw,
+ IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id),
+ IXGBE_SB_IOSF_TARGET_KR_PHY,
+ reg_val);
+
+ /* This device does not fully support AN. */
+ hw->fc.disable_fc_autoneg = true;
+ break;
+ case IXGBE_DEV_ID_X550EM_X_XFI:
+ hw->fc.disable_fc_autoneg = true;
+ break;
+ default:
+ break;
+ }
return rc;
}
diff --git a/drivers/net/hamradio/dmascc.c b/drivers/net/hamradio/dmascc.c
index dec6b76bc0fb..cde41200f40a 100644
--- a/drivers/net/hamradio/dmascc.c
+++ b/drivers/net/hamradio/dmascc.c
@@ -581,7 +581,7 @@ static int __init setup_adapter(int card_base, int type, int n)
priv->param.dma = -1;
INIT_WORK(&priv->rx_work, rx_bh);
dev->ml_priv = priv;
- sprintf(dev->name, "dmascc%i", 2 * n + i);
+ snprintf(dev->name, sizeof(dev->name), "dmascc%i", 2 * n + i);
dev->base_addr = card_base;
dev->irq = irq;
dev->netdev_ops = &scc_netdev_ops;
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index d4751ce23b4f..1902701e15a9 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -2702,8 +2702,7 @@ static void virtnet_remove(struct virtio_device *vdev)
free_netdev(vi->dev);
}
-#ifdef CONFIG_PM_SLEEP
-static int virtnet_freeze(struct virtio_device *vdev)
+static __maybe_unused int virtnet_freeze(struct virtio_device *vdev)
{
struct virtnet_info *vi = vdev->priv;
@@ -2714,7 +2713,7 @@ static int virtnet_freeze(struct virtio_device *vdev)
return 0;
}
-static int virtnet_restore(struct virtio_device *vdev)
+static __maybe_unused int virtnet_restore(struct virtio_device *vdev)
{
struct virtnet_info *vi = vdev->priv;
int err;
@@ -2730,7 +2729,6 @@ static int virtnet_restore(struct virtio_device *vdev)
return 0;
}
-#endif
static struct virtio_device_id id_table[] = {
{ VIRTIO_ID_NET, VIRTIO_DEV_ANY_ID },
diff --git a/tools/lib/bpf/Makefile b/tools/lib/bpf/Makefile
index 1f5300e56b44..445289555487 100644
--- a/tools/lib/bpf/Makefile
+++ b/tools/lib/bpf/Makefile
@@ -189,6 +189,10 @@ install_lib: all_cmd
$(call QUIET_INSTALL, $(LIB_FILE)) \
$(call do_install,$(LIB_FILE),$(libdir_SQ))
+install_headers:
+ $(call QUIET_INSTALL, headers) \
+ $(call do_install,bpf.h,$(prefix)/include/bpf,644)
+
install: install_lib
### Cleaning rules
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-07 20:56:17 +0000