summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/tty/serial/8250/8250_core.c2
-rw-r--r--drivers/tty/serial/8250/8250_exar.c12
-rw-r--r--drivers/tty/serial/8250/8250_mtk.c18
-rw-r--r--drivers/tty/serial/serial-tegra.c16
-rw-r--r--drivers/tty/serial/xilinx_uartps.c8
-rw-r--r--drivers/tty/vt/vt.c29
-rw-r--r--drivers/video/fbdev/core/bitblit.c4
-rw-r--r--drivers/video/fbdev/core/fbcon_ccw.c4
-rw-r--r--drivers/video/fbdev/core/fbcon_cw.c4
-rw-r--r--drivers/video/fbdev/core/fbcon_ud.c4
10 files changed, 69 insertions, 32 deletions
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index fc118f649887..cae61d1ebec5 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -524,6 +524,7 @@ static void __init serial8250_isa_init_ports(void)
*/
up->mcr_mask = ~ALPHA_KLUDGE_MCR;
up->mcr_force = ALPHA_KLUDGE_MCR;
+ serial8250_set_defaults(up);
}
/* chain base port ops to support Remote Supervisor Adapter */
@@ -547,7 +548,6 @@ static void __init serial8250_isa_init_ports(void)
port->membase = old_serial_port[i].iomem_base;
port->iotype = old_serial_port[i].io_type;
port->regshift = old_serial_port[i].iomem_reg_shift;
- serial8250_set_defaults(up);
port->irqflags |= irqflag;
if (serial8250_isa_config != NULL)
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index ddb6aeb76dc5..04b9af7ed941 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -326,7 +326,17 @@ static void setup_gpio(struct pci_dev *pcidev, u8 __iomem *p)
* devices will export them as GPIOs, so we pre-configure them safely
* as inputs.
*/
- u8 dir = pcidev->vendor == PCI_VENDOR_ID_EXAR ? 0xff : 0x00;
+
+ u8 dir = 0x00;
+
+ if ((pcidev->vendor == PCI_VENDOR_ID_EXAR) &&
+ (pcidev->subsystem_vendor != PCI_VENDOR_ID_SEALEVEL)) {
+ // Configure GPIO as inputs for Commtech adapters
+ dir = 0xff;
+ } else {
+ // Configure GPIO as outputs for SeaLevel adapters
+ dir = 0x00;
+ }
writeb(0x00, p + UART_EXAR_MPIOINT_7_0);
writeb(0x00, p + UART_EXAR_MPIOLVL_7_0);
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index f839380c2f4c..98b8a3e30733 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -306,8 +306,21 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios,
}
#endif
+ /*
+ * Store the requested baud rate before calling the generic 8250
+ * set_termios method. Standard 8250 port expects bauds to be
+ * no higher than (uartclk / 16) so the baud will be clamped if it
+ * gets out of that bound. Mediatek 8250 port supports speed
+ * higher than that, therefore we'll get original baud rate back
+ * after calling the generic set_termios method and recalculate
+ * the speed later in this method.
+ */
+ baud = tty_termios_baud_rate(termios);
+
serial8250_do_set_termios(port, termios, old);
+ tty_termios_encode_baud_rate(termios, baud, baud);
+
/*
* Mediatek UARTs use an extra highspeed register (MTK_UART_HIGHS)
*
@@ -339,6 +352,11 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios,
*/
spin_lock_irqsave(&port->lock, flags);
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
/* set DLAB we have cval saved in up->lcr from the call to the core */
serial_port_out(port, UART_LCR, up->lcr | UART_LCR_DLAB);
serial_dl_write(up, quot);
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 8de8bac9c6c7..04d1b0807e66 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -635,7 +635,7 @@ static void tegra_uart_handle_tx_pio(struct tegra_uart_port *tup)
}
static void tegra_uart_handle_rx_pio(struct tegra_uart_port *tup,
- struct tty_port *tty)
+ struct tty_port *port)
{
do {
char flag = TTY_NORMAL;
@@ -653,16 +653,18 @@ static void tegra_uart_handle_rx_pio(struct tegra_uart_port *tup,
ch = (unsigned char) tegra_uart_read(tup, UART_RX);
tup->uport.icount.rx++;
- if (!uart_handle_sysrq_char(&tup->uport, ch) && tty)
- tty_insert_flip_char(tty, ch, flag);
+ if (uart_handle_sysrq_char(&tup->uport, ch))
+ continue;
if (tup->uport.ignore_status_mask & UART_LSR_DR)
continue;
+
+ tty_insert_flip_char(port, ch, flag);
} while (1);
}
static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup,
- struct tty_port *tty,
+ struct tty_port *port,
unsigned int count)
{
int copied;
@@ -672,17 +674,13 @@ static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup,
return;
tup->uport.icount.rx += count;
- if (!tty) {
- dev_err(tup->uport.dev, "No tty port\n");
- return;
- }
if (tup->uport.ignore_status_mask & UART_LSR_DR)
return;
dma_sync_single_for_cpu(tup->uport.dev, tup->rx_dma_buf_phys,
count, DMA_FROM_DEVICE);
- copied = tty_insert_flip_string(tty,
+ copied = tty_insert_flip_string(port,
((unsigned char *)(tup->rx_dma_buf_virt)), count);
if (copied != count) {
WARN_ON(1);
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 672cfa075e28..2833f1418d6d 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1580,8 +1580,10 @@ static int cdns_uart_probe(struct platform_device *pdev)
* If register_console() don't assign value, then console_port pointer
* is cleanup.
*/
- if (!console_port)
+ if (!console_port) {
+ cdns_uart_console.index = id;
console_port = port;
+ }
#endif
rc = uart_add_one_port(&cdns_uart_uart_driver, port);
@@ -1594,8 +1596,10 @@ static int cdns_uart_probe(struct platform_device *pdev)
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
/* This is not port which is used for console that's why clean it up */
if (console_port == port &&
- !(cdns_uart_uart_driver.cons->flags & CON_ENABLED))
+ !(cdns_uart_uart_driver.cons->flags & CON_ENABLED)) {
console_port = NULL;
+ cdns_uart_console.index = -1;
+ }
#endif
cdns_uart_data->cts_override = of_property_read_bool(pdev->dev.of_node,
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 48a8199f7845..42d8c67a481f 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -1092,10 +1092,19 @@ static const struct tty_port_operations vc_port_ops = {
.destruct = vc_port_destruct,
};
+/*
+ * Change # of rows and columns (0 means unchanged/the size of fg_console)
+ * [this is to be used together with some user program
+ * like resize that changes the hardware videomode]
+ */
+#define VC_MAXCOL (32767)
+#define VC_MAXROW (32767)
+
int vc_allocate(unsigned int currcons) /* return 0 on success */
{
struct vt_notifier_param param;
struct vc_data *vc;
+ int err;
WARN_CONSOLE_UNLOCKED();
@@ -1125,6 +1134,11 @@ int vc_allocate(unsigned int currcons) /* return 0 on success */
if (!*vc->vc_uni_pagedir_loc)
con_set_default_unimap(vc);
+ err = -EINVAL;
+ if (vc->vc_cols > VC_MAXCOL || vc->vc_rows > VC_MAXROW ||
+ vc->vc_screenbuf_size > KMALLOC_MAX_SIZE || !vc->vc_screenbuf_size)
+ goto err_free;
+ err = -ENOMEM;
vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_KERNEL);
if (!vc->vc_screenbuf)
goto err_free;
@@ -1143,7 +1157,7 @@ err_free:
visual_deinit(vc);
kfree(vc);
vc_cons[currcons].d = NULL;
- return -ENOMEM;
+ return err;
}
static inline int resize_screen(struct vc_data *vc, int width, int height,
@@ -1158,14 +1172,6 @@ static inline int resize_screen(struct vc_data *vc, int width, int height,
return err;
}
-/*
- * Change # of rows and columns (0 means unchanged/the size of fg_console)
- * [this is to be used together with some user program
- * like resize that changes the hardware videomode]
- */
-#define VC_RESIZE_MAXCOL (32767)
-#define VC_RESIZE_MAXROW (32767)
-
/**
* vc_do_resize - resizing method for the tty
* @tty: tty being resized
@@ -1201,7 +1207,7 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
user = vc->vc_resize_user;
vc->vc_resize_user = 0;
- if (cols > VC_RESIZE_MAXCOL || lines > VC_RESIZE_MAXROW)
+ if (cols > VC_MAXCOL || lines > VC_MAXROW)
return -EINVAL;
new_cols = (cols ? cols : vc->vc_cols);
@@ -1212,7 +1218,7 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
if (new_cols == vc->vc_cols && new_rows == vc->vc_rows)
return 0;
- if (new_screen_size > KMALLOC_MAX_SIZE)
+ if (new_screen_size > KMALLOC_MAX_SIZE || !new_screen_size)
return -EINVAL;
newscreen = kzalloc(new_screen_size, GFP_USER);
if (!newscreen)
@@ -3393,6 +3399,7 @@ static int __init con_init(void)
INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK);
tty_port_init(&vc->port);
visual_init(vc, currcons, 1);
+ /* Assuming vc->vc_{cols,rows,screenbuf_size} are sane here. */
vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_NOWAIT);
vc_init(vc, vc->vc_rows, vc->vc_cols,
currcons || !vc->vc_sw->con_save_screen);
diff --git a/drivers/video/fbdev/core/bitblit.c b/drivers/video/fbdev/core/bitblit.c
index ca935c09a261..35ebeeccde4d 100644
--- a/drivers/video/fbdev/core/bitblit.c
+++ b/drivers/video/fbdev/core/bitblit.c
@@ -216,7 +216,7 @@ static void bit_clear_margins(struct vc_data *vc, struct fb_info *info,
region.color = color;
region.rop = ROP_COPY;
- if (rw && !bottom_only) {
+ if ((int) rw > 0 && !bottom_only) {
region.dx = info->var.xoffset + rs;
region.dy = 0;
region.width = rw;
@@ -224,7 +224,7 @@ static void bit_clear_margins(struct vc_data *vc, struct fb_info *info,
info->fbops->fb_fillrect(info, &region);
}
- if (bh) {
+ if ((int) bh > 0) {
region.dx = info->var.xoffset;
region.dy = info->var.yoffset + bs;
region.width = rs;
diff --git a/drivers/video/fbdev/core/fbcon_ccw.c b/drivers/video/fbdev/core/fbcon_ccw.c
index dfa9a8aa4509..78f3a5621478 100644
--- a/drivers/video/fbdev/core/fbcon_ccw.c
+++ b/drivers/video/fbdev/core/fbcon_ccw.c
@@ -201,7 +201,7 @@ static void ccw_clear_margins(struct vc_data *vc, struct fb_info *info,
region.color = color;
region.rop = ROP_COPY;
- if (rw && !bottom_only) {
+ if ((int) rw > 0 && !bottom_only) {
region.dx = 0;
region.dy = info->var.yoffset;
region.height = rw;
@@ -209,7 +209,7 @@ static void ccw_clear_margins(struct vc_data *vc, struct fb_info *info,
info->fbops->fb_fillrect(info, &region);
}
- if (bh) {
+ if ((int) bh > 0) {
region.dx = info->var.xoffset + bs;
region.dy = 0;
region.height = info->var.yres_virtual;
diff --git a/drivers/video/fbdev/core/fbcon_cw.c b/drivers/video/fbdev/core/fbcon_cw.c
index ce08251bfd38..fd098ff17574 100644
--- a/drivers/video/fbdev/core/fbcon_cw.c
+++ b/drivers/video/fbdev/core/fbcon_cw.c
@@ -184,7 +184,7 @@ static void cw_clear_margins(struct vc_data *vc, struct fb_info *info,
region.color = color;
region.rop = ROP_COPY;
- if (rw && !bottom_only) {
+ if ((int) rw > 0 && !bottom_only) {
region.dx = 0;
region.dy = info->var.yoffset + rs;
region.height = rw;
@@ -192,7 +192,7 @@ static void cw_clear_margins(struct vc_data *vc, struct fb_info *info,
info->fbops->fb_fillrect(info, &region);
}
- if (bh) {
+ if ((int) bh > 0) {
region.dx = info->var.xoffset;
region.dy = info->var.yoffset;
region.height = info->var.yres;
diff --git a/drivers/video/fbdev/core/fbcon_ud.c b/drivers/video/fbdev/core/fbcon_ud.c
index 1936afc78fec..e165a3fad29a 100644
--- a/drivers/video/fbdev/core/fbcon_ud.c
+++ b/drivers/video/fbdev/core/fbcon_ud.c
@@ -231,7 +231,7 @@ static void ud_clear_margins(struct vc_data *vc, struct fb_info *info,
region.color = color;
region.rop = ROP_COPY;
- if (rw && !bottom_only) {
+ if ((int) rw > 0 && !bottom_only) {
region.dy = 0;
region.dx = info->var.xoffset;
region.width = rw;
@@ -239,7 +239,7 @@ static void ud_clear_margins(struct vc_data *vc, struct fb_info *info,
info->fbops->fb_fillrect(info, &region);
}
- if (bh) {
+ if ((int) bh > 0) {
region.dy = info->var.yoffset;
region.dx = info->var.xoffset;
region.height = bh;