diff options
413 files changed, 21016 insertions, 6944 deletions
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt index 8240c023e202..e3f996920403 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt @@ -5,7 +5,7 @@ CPUs in the following Broadcom SoCs: BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664 The enable method is specified by defining the following required -properties in the "cpus" device tree node: +properties in the "cpu" device tree node: - enable-method = "brcm,bcm11351-cpu-method"; - secondary-boot-reg = <...>; @@ -19,8 +19,6 @@ Example: cpus { #address-cells = <1>; #size-cells = <0>; - enable-method = "brcm,bcm11351-cpu-method"; - secondary-boot-reg = <0x3500417c>; cpu0: cpu@0 { device_type = "cpu"; @@ -32,5 +30,7 @@ Example: device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + enable-method = "brcm,bcm11351-cpu-method"; + secondary-boot-reg = <0x3500417c>; }; }; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt new file mode 100644 index 000000000000..a3af54c0e404 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt @@ -0,0 +1,36 @@ +Broadcom Kona Family CPU Enable Method +-------------------------------------- +This binding defines the enable method used for starting secondary +CPUs in the following Broadcom SoCs: + BCM23550 + +The enable method is specified by defining the following required +properties in the "cpu" device tree node: + - enable-method = "brcm,bcm23550"; + - secondary-boot-reg = <...>; + +The secondary-boot-reg property is a u32 value that specifies the +physical address of the register used to request the ROM holding pen +code release a secondary CPU. The value written to the register is +formed by encoding the target CPU id into the low bits of the +physical start address it should jump to. + +Example: + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + enable-method = "brcm,bcm23550"; + secondary-boot-reg = <0x3500417c>; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt new file mode 100644 index 000000000000..080baad923d6 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt @@ -0,0 +1,15 @@ +Broadcom BCM23550 device tree bindings +-------------------------------------- + +This document describes the device tree bindings for boards with the BCM23550 +SoC. + +Required root node property: + - compatible: brcm,bcm23550 + +Example: + / { + model = "BCM23550 SoC"; + compatible = "brcm,bcm23550"; + [...] + } diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index 3f0cbbb8395f..e6782d50cbcd 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -193,6 +193,8 @@ nodes to be present and contain the properties described below. "allwinner,sun6i-a31" "allwinner,sun8i-a23" "arm,realview-smp" + "brcm,bcm11351-cpu-method" + "brcm,bcm23550" "brcm,bcm-nsp-smp" "brcm,brahma-b15" "marvell,armada-375-smp" @@ -204,6 +206,7 @@ nodes to be present and contain the properties described below. "qcom,gcc-msm8660" "qcom,kpss-acc-v1" "qcom,kpss-acc-v2" + "renesas,apmu" "rockchip,rk3036-smp" "rockchip,rk3066-smp" "ste,dbx500-smp" diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt new file mode 100644 index 000000000000..115c5be0bd0b --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt @@ -0,0 +1,14 @@ +* Hisilicon Hi3519 System Controller Block + +This bindings use the following binding: +Documentation/devicetree/bindings/mfd/syscon.txt + +Required properties: +- compatible: "hisilicon,hi3519-sysctrl". +- reg: the register region of this block + +Examples: +sysctrl: system-controller@12010000 { + compatible = "hisilicon,hi3519-sysctrl", "syscon"; + reg = <0x12010000 0x1000>; +}; diff --git a/Documentation/devicetree/bindings/arm/olimex.txt b/Documentation/devicetree/bindings/arm/olimex.txt index 007fb5c685a1..d726aeca56be 100644 --- a/Documentation/devicetree/bindings/arm/olimex.txt +++ b/Documentation/devicetree/bindings/arm/olimex.txt @@ -1,5 +1,9 @@ -Olimex i.MX Platforms Device Tree Bindings ------------------------------------------- +Olimex Device Tree Bindings +--------------------------- + +SAM9-L9260 Board +Required root node properties: + - compatible = "olimex,sam9-l9260", "atmel,at91sam9260"; i.MX23 Olinuxino Low Cost Board Required root node properties: diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index 715d960d5eea..666864517069 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -107,6 +107,9 @@ Rockchip platforms device tree bindings Required root node properties: - compatible = "rockchip,rk3228-evb", "rockchip,rk3228"; +- Rockchip RK3229 Evaluation board: + - compatible = "rockchip,rk3229-evb", "rockchip,rk3229"; + - Rockchip RK3399 evb: Required root node properties: - compatible = "rockchip,rk3399-evb", "rockchip,rk3399"; diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt index f5deace2b380..0ea7f14ef294 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt @@ -47,6 +47,7 @@ Required root node properties: - "hardkernel,odroid-u3" - for Exynos4412-based Hardkernel Odroid U3. - "hardkernel,odroid-x" - for Exynos4412-based Hardkernel Odroid X. - "hardkernel,odroid-x2" - for Exynos4412-based Hardkernel Odroid X2. + - "hardkernel,odroid-xu" - for Exynos5410-based Hardkernel Odroid XU. - "hardkernel,odroid-xu3" - for Exynos5422-based Hardkernel Odroid XU3. - "hardkernel,odroid-xu3-lite" - for Exynos5422-based Hardkernel Odroid XU3 Lite board. diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt index 9cf67e48f222..6adb9d549fce 100644 --- a/Documentation/devicetree/bindings/arm/shmobile.txt +++ b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -39,6 +39,8 @@ Boards: compatible = "renesas,ape6evm", "renesas,r8a73a4" - Atmark Techno Armadillo-800 EVA compatible = "renesas,armadillo800eva" + - Blanche (RTP0RC7792SEB00010S) + compatible = "renesas,blanche", "renesas,r8a7792" - BOCK-W compatible = "renesas,bockw", "renesas,r8a7778" - Genmai (RTK772100BC00000BR) diff --git a/Documentation/devicetree/bindings/arm/tegra.txt b/Documentation/devicetree/bindings/arm/tegra.txt index 73278c6d2dc3..b5a4342c1d46 100644 --- a/Documentation/devicetree/bindings/arm/tegra.txt +++ b/Documentation/devicetree/bindings/arm/tegra.txt @@ -32,7 +32,11 @@ board-specific compatible values: nvidia,whistler toradex,apalis_t30 toradex,apalis_t30-eval + toradex,apalis-tk1 + toradex,apalis-tk1-eval toradex,colibri_t20-512 + toradex,colibri_t30 + toradex,colibri_t30-eval-v3 toradex,iris Trusted Foundations diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt index 079b42a81d7c..18090e7226b4 100644 --- a/Documentation/devicetree/bindings/dma/ti-edma.txt +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt @@ -15,7 +15,7 @@ Required properties: - reg: Memory map of eDMA CC - reg-names: "edma3_cc" - interrupts: Interrupt lines for CCINT, MPERR and CCERRINT. -- interrupt-names: "edma3_ccint", "emda3_mperr" and "edma3_ccerrint" +- interrupt-names: "edma3_ccint", "edma3_mperr" and "edma3_ccerrint" - ti,tptcs: List of TPTCs associated with the eDMA in the following form: <&tptc_phandle TC_priority_number>. The highest priority is 0. @@ -48,7 +48,7 @@ edma: edma@49000000 { reg = <0x49000000 0x10000>; reg-names = "edma3_cc"; interrupts = <12 13 14>; - interrupt-names = "edma3_ccint", "emda3_mperr", "edma3_ccerrint"; + interrupt-names = "edma3_ccint", "edma3_mperr", "edma3_ccerrint"; dma-requests = <64>; #dma-cells = <2>; diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt new file mode 100644 index 000000000000..3b4436e56865 --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt @@ -0,0 +1,28 @@ +QCOM Secure Channel Manager (SCM) + +Qualcomm processors include an interface to communicate to the secure firmware. +This interface allows for clients to request different types of actions. These +can include CPU power up/down, HDCP requests, loading of firmware, and other +assorted actions. + +Required properties: +- compatible: must contain one of the following: + * "qcom,scm-apq8064" for APQ8064 platforms + * "qcom,scm-msm8660" for MSM8660 platforms + * "qcom,scm-msm8690" for MSM8690 platforms + * "qcom,scm" for later processors (MSM8916, APQ8084, MSM8974, etc) +- clocks: One to three clocks may be required based on compatible. + * Only core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660", and "qcom,scm-msm8960" + * Core, iface, and bus clocks required for "qcom,scm" +- clock-names: Must contain "core" for the core clock, "iface" for the interface + clock and "bus" for the bus clock per the requirements of the compatible. + +Example for MSM8916: + + firmware { + scm { + compatible = "qcom,scm"; + clocks = <&gcc GCC_CRYPTO_CLK> , <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "core", "bus", "iface"; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/at91_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91_adc.txt index 0f813dec5e08..f65b04fb7962 100644 --- a/Documentation/devicetree/bindings/iio/adc/at91_adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/at91_adc.txt @@ -59,28 +59,24 @@ adc0: adc@fffb0000 { atmel,adc-res-names = "lowres", "highres"; atmel,adc-use-res = "lowres"; - trigger@0 { - reg = <0>; + trigger0 { trigger-name = "external-rising"; trigger-value = <0x1>; trigger-external; }; - trigger@1 { - reg = <1>; + trigger1 { trigger-name = "external-falling"; trigger-value = <0x2>; trigger-external; }; - trigger@2 { - reg = <2>; + trigger2 { trigger-name = "external-any"; trigger-value = <0x3>; trigger-external; }; - trigger@3 { - reg = <3>; + trigger3 { trigger-name = "continuous"; trigger-value = <0x6>; }; diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt index 0bf1ae243552..3742c152c467 100644 --- a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt @@ -124,7 +124,7 @@ For Tegra124 and Tegra132, the list of valid PHY nodes is given below: - functions: "usb3-ss", "sata" For Tegra210, the list of valid PHY nodes is given below: -- utmi: utmi-0, utmi-1, utmi-2, utmi-3 +- usb2: usb2-0, usb2-1, usb2-2, usb2-3 - functions: "snps", "xusb", "uart" - hsic: hsic-0, hsic-1 - functions: "snps", "xusb" diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.txt b/Documentation/devicetree/bindings/power/renesas,apmu.txt new file mode 100644 index 000000000000..84404c9edff7 --- /dev/null +++ b/Documentation/devicetree/bindings/power/renesas,apmu.txt @@ -0,0 +1,31 @@ +DT bindings for the Renesas Advanced Power Management Unit + +Renesas R-Car line of SoCs utilize one or more APMU hardware units +for CPU core power domain control including SMP boot and CPU Hotplug. + +Required properties: + +- compatible: Should be "renesas,<soctype>-apmu", "renesas,apmu" as fallback. + Examples with soctypes are: + - "renesas,r8a7790-apmu" (R-Car H2) + - "renesas,r8a7791-apmu" (R-Car M2-W) + - "renesas,r8a7792-apmu" (R-Car V2H) + - "renesas,r8a7793-apmu" (R-Car M2-N) + - "renesas,r8a7794-apmu" (R-Car E2) + +- reg: Base address and length of the I/O registers used by the APMU. + +- cpus: This node contains a list of CPU cores, which should match the order + of CPU cores used by the WUPCR and PSTR registers in the Advanced Power + Management Unit section of the device's datasheet. + + +Example: + +This shows the r8a7791 APMU that can control CPU0 and CPU1. + + apmu@e6152000 { + compatible = "renesas,r8a7791-apmu", "renesas,apmu"; + reg = <0 0xe6152000 0 0x188>; + cpus = <&cpu0 &cpu1>; + }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt index fb81179dce37..8007e839a716 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt @@ -2,28 +2,48 @@ TI SOC ECAP based APWM controller Required properties: - compatible: Must be "ti,<soc>-ecap". - for am33xx - compatible = "ti,am33xx-ecap"; - for da850 - compatible = "ti,da850-ecap", "ti,am33xx-ecap"; + for am33xx - compatible = "ti,am3352-ecap", "ti,am33xx-ecap"; + for am4372 - compatible = "ti,am4372-ecap", "ti,am3352-ecap", "ti,am33xx-ecap"; + for da850 - compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap"; + for dra746 - compatible = "ti,dra746-ecap", "ti,am3352-ecap"; - #pwm-cells: should be 3. See pwm.txt in this directory for a description of the cells format. The PWM channel index ranges from 0 to 4. The only third cell flag supported by this binding is PWM_POLARITY_INVERTED. - reg: physical base address and size of the registers map. Optional properties: -- ti,hwmods: Name of the hwmod associated to the ECAP: - "ecap<x>", <x> being the 0-based instance number from the HW spec +- clocks: Handle to the ECAP's functional clock. +- clock-names: Must be set to "fck". Example: -ecap0: ecap@0 { /* ECAP on am33xx */ - compatible = "ti,am33xx-ecap"; +ecap0: ecap@48300100 { /* ECAP on am33xx */ + compatible = "ti,am3352-ecap", "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x48300100 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; +}; + +ecap0: ecap@48300100 { /* ECAP on am4372 */ + compatible = "ti,am4372-ecap", "ti,am3352-ecap", "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48300100 0x80>; ti,hwmods = "ecap0"; + clocks = <&l4ls_gclk>; + clock-names = "fck"; +}; + +ecap0: ecap@1f06000 { /* ECAP on da850 */ + compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x1f06000 0x80>; }; -ecap0: ecap@0 { /* ECAP on da850 */ - compatible = "ti,da850-ecap", "ti,am33xx-ecap"; +ecap0: ecap@4843e100 { + compatible = "ti,dra746-ecap", "ti,am3352-ecap"; #pwm-cells = <3>; - reg = <0x306000 0x80>; + reg = <0x4843e100 0x80>; + clocks = <&l4_root_clk_div>; + clock-names = "fck"; }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt index 9c100b2c5b23..944fe356bb45 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt @@ -2,28 +2,48 @@ TI SOC EHRPWM based PWM controller Required properties: - compatible: Must be "ti,<soc>-ehrpwm". - for am33xx - compatible = "ti,am33xx-ehrpwm"; - for da850 - compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm"; + for am33xx - compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm"; + for am4372 - compatible = "ti,am4372-ehrpwm", "ti-am3352-ehrpwm", "ti,am33xx-ehrpwm"; + for da850 - compatible = "ti,da850-ehrpwm", "ti-am3352-ehrpwm", "ti,am33xx-ehrpwm"; + for dra746 - compatible = "ti,dra746-ehrpwm", "ti-am3352-ehrpwm"; - #pwm-cells: should be 3. See pwm.txt in this directory for a description of the cells format. The only third cell flag supported by this binding is PWM_POLARITY_INVERTED. - reg: physical base address and size of the registers map. Optional properties: -- ti,hwmods: Name of the hwmod associated to the EHRPWM: - "ehrpwm<x>", <x> being the 0-based instance number from the HW spec +- clocks: Handle to the PWM's time-base and functional clock. +- clock-names: Must be set to "tbclk" and "fck". Example: -ehrpwm0: ehrpwm@0 { /* EHRPWM on am33xx */ - compatible = "ti,am33xx-ehrpwm"; +ehrpwm0: pwm@48300200 { /* EHRPWM on am33xx */ + compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48300200 0x100>; + clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; +}; + +ehrpwm0: pwm@48300200 { /* EHRPWM on am4372 */ + compatible = "ti,am4372-ehrpwm", "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x48300200 0x80>; + clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; ti,hwmods = "ehrpwm0"; }; -ehrpwm0: ehrpwm@0 { /* EHRPWM on da850 */ - compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm"; +ehrpwm0: pwm@1f00000 { /* EHRPWM on da850 */ + compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x1f00000 0x2000>; +}; + +ehrpwm0: pwm@4843e200 { /* EHRPWM on dra746 */ + compatible = "ti,dra746-ehrpwm", "ti,am3352-ehrpwm"; #pwm-cells = <3>; - reg = <0x300000 0x2000>; + reg = <0x4843e200 0x80>; + clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>; + clock-names = "tbclk", "fck"; }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt index f7eae77f8354..1a5d7b71db89 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt @@ -1,7 +1,11 @@ TI SOC based PWM Subsystem Required properties: -- compatible: Must be "ti,am33xx-pwmss"; +- compatible: Must be "ti,<soc>-pwmss". + for am33xx - compatible = "ti,am33xx-pwmss"; + for am4372 - compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + for dra746 - compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss" + - reg: physical base address and size of the registers map. - address-cells: Specify the number of u32 entries needed in child nodes. Should set to 1. @@ -16,7 +20,7 @@ Required properties: Also child nodes should also populated under PWMSS DT node. Example: -pwmss0: pwmss@48300000 { +epwmss0: epwmss@48300000 { /* PWMSS for am33xx */ compatible = "ti,am33xx-pwmss"; reg = <0x48300000 0x10>; ti,hwmods = "epwmss0"; @@ -29,3 +33,28 @@ pwmss0: pwmss@48300000 { /* child nodes go here */ }; + +epwmss0: epwmss@48300000 { /* PWMSS for am4372 */ + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss" + reg = <0x48300000 0x10>; + ti,hwmods = "epwmss0"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges = <0x48300100 0x48300100 0x80 /* ECAP */ + 0x48300180 0x48300180 0x80 /* EQEP */ + 0x48300200 0x48300200 0x80>; /* EHRPWM */ + + /* child nodes go here */ +}; + +epwmss0: epwmss@4843e000 { /* PWMSS for DRA7xx */ + compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; + reg = <0x4843e000 0x30>; + ti,hwmods = "epwmss0"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* child nodes go here */ +}; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt new file mode 100644 index 000000000000..4ea39e9186a7 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt @@ -0,0 +1,116 @@ +Qualcomm WCNSS Binding + +This binding describes the Qualcomm WCNSS hardware. It consists of control +block and a BT, WiFi and FM radio block, all using SMD as command channels. + +- compatible: + Usage: required + Value type: <string> + Definition: must be: "qcom,wcnss", + +- qcom,smd-channel: + Usage: required + Value type: <string> + Definition: standard SMD property specifying the SMD channel used for + communication with the WiFi firmware. + Should be "WCNSS_CTRL". + +- qcom,mmio: + Usage: required + Value type: <prop-encoded-array> + Definition: reference to a node specifying the wcnss "ccu" and "dxe" + register blocks. The node must be compatible with one of + the following: + "qcom,riva", + "qcom,pronto" + += SUBNODES +The subnodes of the wcnss node are optional and describe the individual blocks in +the WCNSS. + +== Bluetooth +The following properties are defined to the bluetooth node: + +- compatible: + Usage: required + Value type: <string> + Definition: must be: + "qcom,wcnss-bt" + +== WiFi +The following properties are defined to the WiFi node: + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,wcnss-wlan", + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the "rx" and "tx" interrupts + +- interrupt-names: + Usage: required + Value type: <stringlist> + Definition: must contain "rx" and "tx" + +- qcom,smem-state: + Usage: required + Value type: <prop-encoded-array> + Definition: should reference the tx-enable and tx-rings-empty SMEM states + +- qcom,smem-state-names: + Usage: required + Value type: <stringlist> + Definition: must contain "tx-enable" and "tx-rings-empty" + += EXAMPLE +The following example represents a SMD node, with one edge representing the +"pronto" subsystem, with the wcnss device and its wcn3680 BT and WiFi blocks +described; as found on the 8974 platform. + +smd { + compatible = "qcom,smd"; + + pronto-edge { + interrupts = <0 142 1>; + + qcom,ipc = <&apcs 8 17>; + qcom,smd-edge = <6>; + + wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + #address-cells = <1>; + #size-cells = <1>; + + qcom,mmio = <&pronto>; + + bt { + compatible = "qcom,wcnss-bt"; + }; + + wlan { + compatible = "qcom,wcnss-wlan"; + + interrupts = <0 145 0>, <0 146 0>; + interrupt-names = "tx", "rx"; + + qcom,smem-state = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", "tx-rings-empty"; + }; + }; + }; +}; + +soc { + pronto: pronto { + compatible = "qcom,pronto"; + + reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>; + reg-names = "ccu", "dxe", "pmu"; + }; +}; diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt index 5883b73ea1b5..f4262ed60582 100644 --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt @@ -113,13 +113,13 @@ usb2: gadget@fff78000 { clock-names = "hclk", "pclk"; atmel,vbus-gpio = <&pioB 19 0>; - ep0 { + ep@0 { reg = <0>; atmel,fifo-size = <64>; atmel,nb-banks = <1>; }; - ep1 { + ep@1 { reg = <1>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -127,7 +127,7 @@ usb2: gadget@fff78000 { atmel,can-isoc; }; - ep2 { + ep@2 { reg = <2>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -135,21 +135,21 @@ usb2: gadget@fff78000 { atmel,can-isoc; }; - ep3 { + ep@3 { reg = <3>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; atmel,can-dma; }; - ep4 { + ep@4 { reg = <4>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; atmel,can-dma; }; - ep5 { + ep@5 { reg = <5>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -157,7 +157,7 @@ usb2: gadget@fff78000 { atmel,can-isoc; }; - ep6 { + ep@6 { reg = <6>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt index d28295a3e55f..3eee9e505400 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt @@ -104,10 +104,10 @@ Example: nvidia,xusb-padctl = <&padctl>; - phys = <&{/padctl@0,7009f000/pads/usb2/usb2-1}>, /* mini-PCIe USB */ - <&{/padctl@0,7009f000/pads/usb2/usb2-2}>, /* USB A */ - <&{/padctl@0,7009f000/pads/pcie/pcie-0}>; /* USB A */ - phy-names = "utmi-1", "utmi-2", "usb3-0"; + phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* mini-PCIe USB */ + <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* USB A */ + <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>; /* USB A */ + phy-names = "usb2-1", "usb2-2", "usb3-0"; avddio-pex-supply = <&vdd_1v05_run>; dvddio-pex-supply = <&vdd_1v05_run>; diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 414b42710a36..faacd52370d2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -7,9 +7,10 @@ dtb-$(CONFIG_MACH_ARTPEC6) += \ dtb-$(CONFIG_MACH_ASM9260) += \ alphascale-asm9260-devkit.dtb # Keep at91 dtb files sorted alphabetically for each SoC -dtb-$(CONFIG_SOC_SAM_V4_V5) += \ +dtb-$(CONFIG_SOC_AT91RM9200) += \ at91rm9200ek.dtb \ - mpa1600.dtb \ + mpa1600.dtb +dtb-$(CONFIG_SOC_AT91SAM9) += \ animeo_ip.dtb \ at91-qil_a9260.dtb \ aks-cdu.dtb \ @@ -17,8 +18,10 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \ evk-pro3.dtb \ tny_a9260.dtb \ usb_a9260.dtb \ + at91sam9260ek.dtb \ at91sam9261ek.dtb \ at91sam9263ek.dtb \ + at91-sam9_l9260.dtb \ tny_a9263.dtb \ usb_a9263.dtb \ at91-foxg20.dtb \ @@ -85,6 +88,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm47094-dlink-dir-885l.dtb \ bcm94708.dtb \ bcm94709.dtb \ + bcm953012er.dtb \ bcm953012k.dtb dtb-$(CONFIG_ARCH_BCM_63XX) += \ bcm963138dvt.dtb @@ -95,8 +99,11 @@ dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \ bcm958305k.dtb dtb-$(CONFIG_ARCH_BCM_MOBILE) += \ bcm28155-ap.dtb \ - bcm21664-garnet.dtb + bcm21664-garnet.dtb \ + bcm23550-sparrow.dtb dtb-$(CONFIG_ARCH_BCM_NSP) += \ + bcm958525xmc.dtb \ + bcm958625hr.dtb \ bcm958625k.dtb dtb-$(CONFIG_ARCH_BERLIN) += \ berlin2-sony-nsz-gs7.dtb \ @@ -104,6 +111,8 @@ dtb-$(CONFIG_ARCH_BERLIN) += \ berlin2q-marvell-dmp.dtb dtb-$(CONFIG_ARCH_BRCMSTB) += \ bcm7445-bcm97445svmb.dtb +dtb-$(CONFIG_ARCH_CLPS711X) += \ + ep7211-edb7211.dtb dtb-$(CONFIG_ARCH_DAVINCI) += \ da850-enbw-cmc.dtb \ da850-evm.dtb @@ -134,6 +143,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5250-snow-rev5.dtb \ exynos5250-spring.dtb \ exynos5260-xyref5260.dtb \ + exynos5410-odroidxu.dtb \ exynos5410-smdk5410.dtb \ exynos5420-arndale-octa.dtb \ exynos5420-peach-pit.dtb \ @@ -146,8 +156,6 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5800-peach-pi.dtb dtb-$(CONFIG_ARCH_HI3xxx) += \ hi3620-hi4511.dtb -dtb-$(CONFIG_ARCH_HIX5HD2) += \ - hisi-x5hd2-dkb.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += \ highbank.dtb \ ecx-2000.dtb @@ -155,6 +163,10 @@ dtb-$(CONFIG_ARCH_HIP01) += \ hip01-ca9x2.dtb dtb-$(CONFIG_ARCH_HIP04) += \ hip04-d01.dtb +dtb-$(CONFIG_ARCH_HISI) += \ + hi3519-demb.dtb +dtb-$(CONFIG_ARCH_HIX5HD2) += \ + hisi-x5hd2-dkb.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += \ integratorap.dtb \ integratorcp.dtb @@ -356,6 +368,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-gw54xx.dtb \ imx6q-gw551x.dtb \ imx6q-gw552x.dtb \ + imx6q-h100.dtb \ imx6q-hummingboard.dtb \ imx6q-icore-rqs.dtb \ imx6q-marsboard.dtb \ @@ -377,6 +390,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-tx6q-1110.dtb \ imx6q-tx6q-11x0-mb7.dtb \ imx6q-udoo.dtb \ + imx6q-utilite-pro.dtb \ imx6q-wandboard.dtb \ imx6q-wandboard-revb1.dtb \ imx6qp-nitrogen6_max.dtb \ @@ -399,9 +413,11 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-tx6ul-mainboard.dtb dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ + imx7d-colibri-eval-v3.dtb \ imx7d-nitrogen7.dtb \ imx7d-sbc-imx7.dtb \ - imx7d-sdb.dtb + imx7d-sdb.dtb \ + imx7s-colibri-eval-v3.dtb dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-qds.dtb \ ls1021a-twr.dtb @@ -416,7 +432,9 @@ dtb-$(CONFIG_SOC_VF610) += \ dtb-$(CONFIG_ARCH_MXS) += \ imx23-evk.dtb \ imx23-olinuxino.dtb \ + imx23-sansa.dtb \ imx23-stmp378x_devb.dtb \ + imx23-xfi3.dtb \ imx28-apf28.dtb \ imx28-apf28dev.dtb \ imx28-apx4devkit.dtb \ @@ -572,7 +590,8 @@ dtb-$(CONFIG_ARCH_PRIMA2) += \ dtb-$(CONFIG_ARCH_OXNAS) += \ wd-mbwe.dtb dtb-$(CONFIG_ARCH_QCOM) += \ - qcom-apq8064-arrow-db600c.dtb \ + qcom-apq8060-dragonboard.dtb \ + qcom-apq8064-arrow-sd-600eval.dtb \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ qcom-apq8064-sony-xperia-yuga.dtb \ @@ -602,6 +621,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3066a-rayeager.dtb \ rk3188-radxarock.dtb \ rk3228-evb.dtb \ + rk3229-evb.dtb \ rk3288-evb-act8846.dtb \ rk3288-evb-rk808.dtb \ rk3288-firefly-beta.dtb \ @@ -638,6 +658,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ r8a7790-lager.dtb \ r8a7791-koelsch.dtb \ r8a7791-porter.dtb \ + r8a7792-blanche.dtb \ r8a7793-gose.dtb \ r8a7794-alt.dtb \ r8a7794-silk.dtb \ @@ -728,6 +749,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31s-yones-toptech-bs1078-v2.dtb dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-bananapi.dtb \ + sun7i-a20-bananapi-m1-plus.dtb \ sun7i-a20-bananapro.dtb \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ @@ -752,8 +774,10 @@ dtb-$(CONFIG_MACH_SUN7I) += \ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a23-evb.dtb \ sun8i-a23-gt90h-v4.dtb \ + sun8i-a23-inet86dz.dtb \ sun8i-a23-ippo-q8h-v5.dtb \ sun8i-a23-ippo-q8h-v1.2.dtb \ + sun8i-a23-polaroid-mid2407pxe03.dtb \ sun8i-a23-polaroid-mid2809pxe04.dtb \ sun8i-a23-q8-tablet.dtb \ sun8i-a33-et-q8-v1.6.dtb \ @@ -763,10 +787,12 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a33-sinlinx-sina33.dtb \ sun8i-a83t-allwinner-h8homlet-v2.dtb \ sun8i-a83t-cubietruck-plus.dtb \ + sun8i-h3-bananapi-m2-plus.dtb \ sun8i-h3-orangepi-2.dtb \ sun8i-h3-orangepi-one.dtb \ sun8i-h3-orangepi-pc.dtb \ - sun8i-h3-orangepi-plus.dtb + sun8i-h3-orangepi-plus.dtb \ + sun8i-r16-parrot.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb @@ -794,6 +820,7 @@ dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \ tegra114-roth.dtb \ tegra114-tn7.dtb dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \ + tegra124-apalis-eval.dtb \ tegra124-jetson-tk1.dtb \ tegra124-nyan-big.dtb \ tegra124-nyan-blaze.dtb \ diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts index d9c50fbb49d2..5b1bf92d927c 100644 --- a/arch/arm/boot/dts/aks-cdu.dts +++ b/arch/arm/boot/dts/aks-cdu.dts @@ -57,7 +57,7 @@ }; }; - usb0: ohci@00500000 { + usb0: ohci@500000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 0cc150b87b86..e247c15e5176 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -18,6 +18,10 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; + chosen { + stdout-path = &uart0; + }; + leds { pinctrl-names = "default"; pinctrl-0 = <&user_leds_s0>; @@ -318,7 +322,7 @@ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; - regulator-max-microvolt = <1325000>; + regulator-max-microvolt = <1351500>; regulator-boot-on; regulator-always-on; }; @@ -359,12 +363,8 @@ phy-mode = "mii"; }; -&cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; - phy-mode = "mii"; -}; - &mac { + slaves = <1>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 55c0e954b146..ca721670bd91 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -33,6 +33,17 @@ status = "okay"; }; +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro@1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; + &am33xx_pinmux { nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 516673bb023d..5d28712ad253 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -640,7 +640,7 @@ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <912500>; - regulator-max-microvolt = <1312500>; + regulator-max-microvolt = <1351500>; regulator-boot-on; regulator-always-on; }; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 282fe1b37095..09308d66645b 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -560,7 +560,7 @@ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <912500>; - regulator-max-microvolt = <1312500>; + regulator-max-microvolt = <1351500>; regulator-boot-on; regulator-always-on; }; diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index e271013e78a6..7d8b8fefdf08 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -206,6 +206,13 @@ gpio-controller; #gpio-cells = <2>; }; + + pca9536: gpio@41 { + compatible = "ti,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + }; }; #include "tps65910.dtsi" diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 7fa295155543..98748c61ed99 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -45,19 +45,9 @@ device_type = "cpu"; reg = <0>; - /* - * To consider voltage drop between PMIC and SoC, - * tolerance value is reduced to 2% from 4% and - * voltage value is increased as a precaution. - */ - operating-points = < - /* kHz uV */ - 720000 1285000 - 600000 1225000 - 500000 1125000 - 275000 1125000 - >; - voltage-tolerance = <2>; /* 2 percentage */ + operating-points-v2 = <&cpu0_opp_table>; + ti,syscon-efuse = <&scm_conf 0x7fc 0x1fff 0>; + ti,syscon-rev = <&scm_conf 0x600>; clocks = <&dpll_mpu_ck>; clock-names = "cpu"; @@ -66,6 +56,78 @@ }; }; + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + + /* + * The three following nodes are marked with opp-suspend + * because the can not be enabled simultaneously on a + * single SoC. + */ + opp50@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <950000 931000 969000>; + opp-supported-hw = <0x06 0x0010>; + opp-suspend; + }; + + opp100@275000000 { + opp-hz = /bits/ 64 <275000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x01 0x00FF>; + opp-suspend; + }; + + opp100@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0020>; + opp-suspend; + }; + + opp100@500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + opp100@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0040>; + }; + + opp120@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1200000 1176000 1224000>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + opp120@720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1200000 1176000 1224000>; + opp-supported-hw = <0x06 0x0080>; + }; + + oppturbo@720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1260000 1234800 1285200>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + oppturbo@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1260000 1234800 1285200>; + opp-supported-hw = <0x06 0x0100>; + }; + + oppnitro@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1325000 1298500 1351500>; + opp-supported-hw = <0x04 0x0200>; + }; + }; + pmu { compatible = "arm,cortex-a8-pmu"; interrupts = <3>; @@ -187,7 +249,7 @@ reg = <0x49000000 0x10000>; reg-names = "edma3_cc"; interrupts = <12 13 14>; - interrupt-names = "edma3_ccint", "emda3_mperr", + interrupt-names = "edma3_ccint", "edma3_mperr", "edma3_ccerrint"; dma-requests = <64>; #dma-cells = <2>; @@ -679,20 +741,24 @@ 0x48300200 0x48300200 0x80>; /* EHRPWM */ ecap0: ecap@48300100 { - compatible = "ti,am33xx-ecap"; + compatible = "ti,am3352-ecap", + "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48300100 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; interrupts = <31>; interrupt-names = "ecap0"; - ti,hwmods = "ecap0"; status = "disabled"; }; ehrpwm0: pwm@48300200 { - compatible = "ti,am33xx-ehrpwm"; + compatible = "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48300200 0x80>; - ti,hwmods = "ehrpwm0"; + clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; status = "disabled"; }; }; @@ -709,20 +775,24 @@ 0x48302200 0x48302200 0x80>; /* EHRPWM */ ecap1: ecap@48302100 { - compatible = "ti,am33xx-ecap"; + compatible = "ti,am3352-ecap", + "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48302100 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; interrupts = <47>; interrupt-names = "ecap1"; - ti,hwmods = "ecap1"; status = "disabled"; }; ehrpwm1: pwm@48302200 { - compatible = "ti,am33xx-ehrpwm"; + compatible = "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48302200 0x80>; - ti,hwmods = "ehrpwm1"; + clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; status = "disabled"; }; }; @@ -739,20 +809,24 @@ 0x48304200 0x48304200 0x80>; /* EHRPWM */ ecap2: ecap@48304100 { - compatible = "ti,am33xx-ecap"; + compatible = "ti,am3352-ecap", + "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48304100 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; interrupts = <61>; interrupt-names = "ecap2"; - ti,hwmods = "ecap2"; status = "disabled"; }; ehrpwm2: pwm@48304200 { - compatible = "ti,am33xx-ehrpwm"; + compatible = "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48304200 0x80>; - ti,hwmods = "ehrpwm2"; + clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts index cb7de1d4e05f..f9d8f3948c4a 100644 --- a/arch/arm/boot/dts/am3517-craneboard.dts +++ b/arch/arm/boot/dts/am3517-craneboard.dts @@ -20,7 +20,7 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; - vbat: fixedregulator@0 { + vbat: fixedregulator { compatible = "regulator-fixed"; regulator-name = "vbat"; regulator-min-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index cd81ecf12731..0fadae5396e1 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -44,10 +44,49 @@ clocks = <&dpll_mpu_ck>; clock-names = "cpu"; + operating-points-v2 = <&cpu0_opp_table>; + ti,syscon-efuse = <&scm_conf 0x610 0x3f 0>; + ti,syscon-rev = <&scm_conf 0x600>; + clock-latency = <300000>; /* From omap-cpufreq driver */ }; }; + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + + opp50@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <950000 931000 969000>; + opp-supported-hw = <0xFF 0x01>; + opp-suspend; + }; + + opp100@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0xFF 0x04>; + }; + + opp120@720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1200000 1176000 1224000>; + opp-supported-hw = <0xFF 0x08>; + }; + + oppturbo@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1260000 1234800 1285200>; + opp-supported-hw = <0xFF 0x10>; + }; + + oppnitro@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1325000 1298500 1351500>; + opp-supported-hw = <0xFF 0x20>; + }; + }; + gic: interrupt-controller@48241000 { compatible = "arm,cortex-a9-gic"; interrupt-controller; @@ -199,7 +238,7 @@ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma3_ccint", "emda3_mperr", + interrupt-names = "edma3_ccint", "edma3_mperr", "edma3_ccerrint"; dma-requests = <64>; #dma-cells = <2>; @@ -671,18 +710,24 @@ status = "disabled"; ecap0: ecap@48300100 { - compatible = "ti,am4372-ecap","ti,am33xx-ecap"; + compatible = "ti,am4372-ecap", + "ti,am3352-ecap", + "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48300100 0x80>; - ti,hwmods = "ecap0"; + clocks = <&l4ls_gclk>; + clock-names = "fck"; status = "disabled"; }; ehrpwm0: pwm@48300200 { - compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; + compatible = "ti,am4372-ehrpwm", + "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48300200 0x80>; - ti,hwmods = "ehrpwm0"; + clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; status = "disabled"; }; }; @@ -697,18 +742,24 @@ status = "disabled"; ecap1: ecap@48302100 { - compatible = "ti,am4372-ecap","ti,am33xx-ecap"; + compatible = "ti,am4372-ecap", + "ti,am3352-ecap", + "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48302100 0x80>; - ti,hwmods = "ecap1"; + clocks = <&l4ls_gclk>; + clock-names = "fck"; status = "disabled"; }; ehrpwm1: pwm@48302200 { - compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; + compatible = "ti,am4372-ehrpwm", + "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48302200 0x80>; - ti,hwmods = "ehrpwm1"; + clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; status = "disabled"; }; }; @@ -723,18 +774,24 @@ status = "disabled"; ecap2: ecap@48304100 { - compatible = "ti,am4372-ecap","ti,am33xx-ecap"; + compatible = "ti,am4372-ecap", + "ti,am3352-ecap", + "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48304100 0x80>; - ti,hwmods = "ecap2"; + clocks = <&l4ls_gclk>; + clock-names = "fck"; status = "disabled"; }; ehrpwm2: pwm@48304200 { - compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; + compatible = "ti,am4372-ehrpwm", + "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48304200 0x80>; - ti,hwmods = "ehrpwm2"; + clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; status = "disabled"; }; }; @@ -749,10 +806,13 @@ status = "disabled"; ehrpwm3: pwm@48306200 { - compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; + compatible = "ti,am4372-ehrpwm", + "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48306200 0x80>; - ti,hwmods = "ehrpwm3"; + clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; status = "disabled"; }; }; @@ -767,10 +827,13 @@ status = "disabled"; ehrpwm4: pwm@48308200 { - compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; + compatible = "ti,am4372-ehrpwm", + "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48308200 0x80>; - ti,hwmods = "ehrpwm4"; + clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; status = "disabled"; }; }; @@ -785,10 +848,13 @@ status = "disabled"; ehrpwm5: pwm@4830a200 { - compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; + compatible = "ti,am4372-ehrpwm", + "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x4830a200 0x80>; - ti,hwmods = "ehrpwm5"; + clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; status = "disabled"; }; }; @@ -842,6 +908,13 @@ dma-names = "tx", "rx"; }; + rng: rng@48310000 { + compatible = "ti,omap4-rng"; + ti,hwmods = "rng"; + reg = <0x48310000 0x2000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + }; + mcasp0: mcasp@48038000 { compatible = "ti,am33xx-mcasp-audio"; ti,hwmods = "mcasp0"; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 5bcd3aa025bc..14677d599595 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -897,7 +897,7 @@ pinctrl-0 = <&dss_pins>; port { - dpi_out: endpoint@0 { + dpi_out: endpoint { remote-endpoint = <&lcd_in>; data-lines = <24>; }; @@ -975,3 +975,7 @@ clock-names = "ext-clk", "int-clk"; status = "okay"; }; + +&cpu { + cpu0-supply = <&dcdc2>; +}; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index 76dcfc6d5f0d..12a69518383e 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -382,6 +382,7 @@ }; &mac { + slaves = <1>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; diff --git a/arch/arm/boot/dts/am437x-sbc-t43.dts b/arch/arm/boot/dts/am437x-sbc-t43.dts index 5f750c0ed6c9..d23260d3a581 100644 --- a/arch/arm/boot/dts/am437x-sbc-t43.dts +++ b/arch/arm/boot/dts/am437x-sbc-t43.dts @@ -145,7 +145,7 @@ pinctrl-0 = <&dss_pinctrl_default>; port { - dpi_lcd_out: endpoint@0 { + dpi_lcd_out: endpoint { remote-endpoint = <&lcd_in>; data-lines = <24>; }; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 3549b8c9ac49..ad32e55532f8 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -754,7 +754,7 @@ pinctrl-0 = <&dss_pins>; port { - dpi_out: endpoint@0 { + dpi_out: endpoint { remote-endpoint = <&lcd_in>; data-lines = <24>; }; diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index 7630ba1d89e4..d1d73b725f47 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -104,6 +104,14 @@ clock-div = <1>; }; + rng_fck: rng_fck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + ehrpwm0_tbclk: ehrpwm0_tbclk@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts index 988e99632d49..31f9be632406 100644 --- a/arch/arm/boot/dts/am57xx-sbc-am57x.dts +++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts @@ -128,7 +128,7 @@ vdda_video-supply = <&ldoln_reg>; port { - dpi_lcd_out: endpoint@0 { + dpi_lcd_out: endpoint { remote-endpoint = <&lcd_in>; data-lines = <24>; }; diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index 0962f2fa3f6e..9cc372b9fb9b 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -32,15 +32,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <18432000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -114,7 +105,7 @@ }; }; - usb0: ohci@00500000 { + usb0: ohci@500000 { num-ports = <2>; atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts index c60206efb583..2e0556af6e5e 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -239,22 +239,6 @@ status = "okay"; }; - mdio@72004 { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - phy_dedicated: ethernet-phy@0 { - /* - * Annoyingly, the marvell phy driver - * configures the LED register, rather - * than preserving reset-loaded setting. - * We undo that rubbish here. - */ - marvell,reg-init = <3 16 0 0x101e>; - reg = <0>; - }; - }; - pinctrl@18000 { clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins { marvell,pins = "mpp46"; diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts index e9ced30159a7..4da011a7a698 100644 --- a/arch/arm/boot/dts/at91-ariag25.dts +++ b/arch/arm/boot/dts/at91-ariag25.dts @@ -34,15 +34,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -178,7 +169,7 @@ }; - onewire@0 { + onewire { compatible = "w1-gpio"; gpios = <&pioA 21 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi index b6ea3f4a7206..02d8ef43de3a 100644 --- a/arch/arm/boot/dts/at91-cosino.dtsi +++ b/arch/arm/boot/dts/at91-cosino.dtsi @@ -26,15 +26,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts index 6bf873e7d96c..50d5e719b451 100644 --- a/arch/arm/boot/dts/at91-foxg20.dts +++ b/arch/arm/boot/dts/at91-foxg20.dts @@ -23,15 +23,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <18432000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -128,13 +119,13 @@ }; }; - usb0: ohci@00500000 { + usb0: ohci@500000 { num-ports = <2>; status = "okay"; }; }; - i2c@0 { + i2c-gpio-0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; i2c-gpio,delay-us = <5>; /* ~85 kHz */ diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts index 229e989eb60d..b4f147c193fd 100644 --- a/arch/arm/boot/dts/at91-kizbox.dts +++ b/arch/arm/boot/dts/at91-kizbox.dts @@ -54,7 +54,7 @@ }; }; - usb0: ohci@00500000 { + usb0: ohci@500000 { num-ports = <1>; status = "okay"; }; @@ -96,7 +96,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { status = "okay"; rtc: pcf8563@51 { diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts index 4f2eebf4a560..8f019184fccf 100644 --- a/arch/arm/boot/dts/at91-qil_a9260.dts +++ b/arch/arm/boot/dts/at91-qil_a9260.dts @@ -20,15 +20,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -111,7 +102,7 @@ }; }; - usb0: ohci@00500000 { + usb0: ohci@500000 { num-ports = <2>; status = "okay"; }; @@ -187,7 +178,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts new file mode 100644 index 000000000000..171243ca4f2f --- /dev/null +++ b/arch/arm/boot/dts/at91-sam9_l9260.dts @@ -0,0 +1,121 @@ +/* + * at91-sam9_l9260.dts - Device Tree file for Olimex SAM9-L9260 board + * + * Copyright (C) 2016 Raashid Muhammed <raashidmuhammed@zilogic.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "at91sam9260.dtsi" + +/ { + model = "Olimex sam9-l9260"; + compatible = "olimex,sam9-l9260", "atmel,at91sam9260", "atmel,at91sam9"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + mmc0: mmc@fffa8000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_clk + &pinctrl_mmc0_slot1_cmd_dat0 + &pinctrl_mmc0_slot1_dat1_3>; + status = "okay"; + + slot@1 { + reg = <1>; + bus-width = <4>; + cd-gpios = <&pioC 8 GPIO_ACTIVE_HIGH>; + wp-gpios = <&pioC 4 GPIO_ACTIVE_HIGH>; + }; + }; + + macb0: ethernet@fffc4000 { + pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii_alt>; + phy-mode = "mii"; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + }; + }; + + spi0: spi@fffc8000 { + cs-gpios = <&pioC 11 0>, <0>, <0>, <0>; + status = "okay"; + + flash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <15000000>; + reg = <0>; + }; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + pinctrl@fffff400 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* CD pin */ + AT91_PIOC 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* WP pin */ + }; + }; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt = <1>; + status = "okay"; + }; + + usb0: ohci@500000 { + status = "okay"; + }; + + }; + + i2c-gpio-0 { + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + + pwr_led { + label = "sam9-l9260:yellow:pwr"; + gpios = <&pioA 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + }; + + status_led { + label = "sam9-l9260:green:status"; + gpios = <&pioA 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index eb4f1ac96271..0b9a59d5fdac 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -158,56 +158,64 @@ i2c-sda-hold-time-ns = <350>; status = "okay"; - pmic: act8865@5b { - compatible = "active-semi,act8865"; + pmic@5b { + compatible = "active-semi,act8945a"; reg = <0x5b>; active-semi,vsel-high; + active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>; + active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>; + active-semi,irq_gpios = <&pioA 45 GPIO_ACTIVE_LOW>; + active-semi,input-voltage-threshold-microvolt = <6600>; + active-semi,precondition-timeout = <40>; + active-semi,total-timeout = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>; status = "okay"; regulators { - vdd_1v35_reg: DCDC_REG1 { + vdd_1v35_reg: REG_DCDC1 { regulator-name = "VDD_1V35"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; regulator-always-on; }; - vdd_1v2_reg: DCDC_REG2 { + vdd_1v2_reg: REG_DCDC2 { regulator-name = "VDD_1V2"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1300000>; regulator-always-on; }; - vdd_3v3_reg: DCDC_REG3 { + vdd_3v3_reg: REG_DCDC3 { regulator-name = "VDD_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - vdd_fuse_reg: LDO_REG1 { + vdd_fuse_reg: REG_LDO1 { regulator-name = "VDD_FUSE"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-always-on; }; - vdd_3v3_lp_reg: LDO_REG2 { + vdd_3v3_lp_reg: REG_LDO2 { regulator-name = "VDD_3V3_LP"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - vdd_led_reg: LDO_REG3 { + vdd_led_reg: REG_LDO3 { regulator-name = "VDD_LED"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - vdd_sdhc_1v8_reg: LDO_REG4 { + vdd_sdhc_1v8_reg: REG_LDO4 { regulator-name = "VDD_SDHC_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -309,6 +317,21 @@ bias-disable; }; + pinctrl_charger_chglev: charger_chglev { + pinmux = <PIN_PA12__GPIO>; + bias-disable; + }; + + pinctrl_charger_irq: charger_irq { + pinmux = <PIN_PB13__GPIO>; + bias-disable; + }; + + pinctrl_charger_lbo: charger_lbo { + pinmux = <PIN_PC8__GPIO>; + bias-pull-up; + }; + pinctrl_flx0_default: flx0_default { pinmux = <PIN_PB28__FLEXCOM0_IO0>, <PIN_PB29__FLEXCOM0_IO1>; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index f3e2b96c06a3..c51fc652f6c7 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -297,7 +297,7 @@ }; }; - vcc_mmc0_reg: fixedregulator@0 { + vcc_mmc0_reg: fixedregulator_mmc0 { compatible = "regulator-fixed"; gpio = <&pioE 2 GPIO_ACTIVE_LOW>; regulator-name = "mmc0-card-supply"; diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi index e7b2109fc85a..a92c6e0ca854 100644 --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi @@ -20,8 +20,11 @@ }; clocks { - main_clock: main_clock { - compatible = "atmel,osc", "fixed-clock"; + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { clock-frequency = <12000000>; }; @@ -106,7 +109,7 @@ }; }; - vcc_3v3_reg: fixedregulator@0 { + vcc_3v3_reg: fixedregulator_3v3 { compatible = "regulator-fixed"; regulator-name = "VCC 3V3"; regulator-min-microvolt = <3300000>; @@ -115,7 +118,7 @@ regulator-always-on; }; - vcc_mmc0_reg: fixedregulator@1 { + vcc_mmc0_reg: fixedregulator_mmc0 { compatible = "regulator-fixed"; gpio = <&pioE 15 GPIO_ACTIVE_HIGH>; regulator-name = "RST_n MCI0"; diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts index abaaba58fbec..eac4ea2744cc 100644 --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts @@ -159,7 +159,7 @@ }; }; - vcc_mmc1_reg: fixedregulator@2 { + vcc_mmc1_reg: fixedregulator_mmc1 { compatible = "regulator-fixed"; gpio = <&pioE 17 GPIO_ACTIVE_LOW>; regulator-name = "VDD MCI1"; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index da84e65b56ef..ed7fce297738 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -252,7 +252,7 @@ }; }; - vcc_3v3_reg: fixedregulator@0 { + vcc_3v3_reg: fixedregulator_3v3 { compatible = "regulator-fixed"; regulator-name = "VCC 3V3"; regulator-min-microvolt = <3300000>; @@ -261,7 +261,7 @@ regulator-always-on; }; - vcc_mmc1_reg: fixedregulator@1 { + vcc_mmc1_reg: fixedregulator_mmc1 { compatible = "regulator-fixed"; gpio = <&pioE 4 GPIO_ACTIVE_LOW>; regulator-name = "VDD MCI1"; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 4e98cda97403..f8b96cef5e1a 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -69,26 +69,6 @@ ahb { apb { - lcd_bus@f0000000 { - status = "okay"; - - lcd@f0000000 { - status = "okay"; - }; - - lcdovl1@f0000140 { - status = "okay"; - }; - - lcdovl2@f0000240 { - status = "okay"; - }; - - lcdheo1@f0000340 { - status = "okay"; - }; - }; - adc0: adc@fc034000 { pinctrl-names = "default"; pinctrl-0 = < diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts index 6a366ee952a8..e0c0b2897a49 100644 --- a/arch/arm/boot/dts/at91-vinco.dts +++ b/arch/arm/boot/dts/at91-vinco.dts @@ -245,7 +245,7 @@ }; - vcc_3v3_reg: fixedregulator@0 { + vcc_3v3_reg: fixedregulator_3v3 { compatible = "regulator-fixed"; regulator-name = "VCC 3V3"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index f6cb7a80a2f5..4e913c2ccb79 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -948,7 +948,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { compatible = "i2c-gpio"; gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */ &pioA 26 GPIO_ACTIVE_HIGH /* scl */ diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index d4884dd1c243..a3e363d79122 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -938,25 +938,21 @@ atmel,adc-res-names = "lowres", "highres"; atmel,adc-use-res = "highres"; - trigger@0 { - reg = <0>; + trigger0 { trigger-name = "timer-counter-0"; trigger-value = <0x1>; }; - trigger@1 { - reg = <1>; + trigger1 { trigger-name = "timer-counter-1"; trigger-value = <0x3>; }; - trigger@2 { - reg = <2>; + trigger2 { trigger-name = "timer-counter-2"; trigger-value = <0x5>; }; - trigger@3 { - reg = <3>; + trigger3 { trigger-name = "external"; trigger-value = <0xd>; trigger-external; @@ -1007,7 +1003,7 @@ status = "disabled"; }; - usb0: ohci@00500000 { + usb0: ohci@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; @@ -1017,7 +1013,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { compatible = "i2c-gpio"; gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */ &pioA 24 GPIO_ACTIVE_HIGH /* scl */ diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts new file mode 100644 index 000000000000..2c87f58448e7 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9260ek.dts @@ -0,0 +1,211 @@ +/* + * Device Tree file for Atmel at91sam9260 Evaluation Kit + * + * Copyright (C) 2016 Atmel, + * 2016 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; +#include "at91sam9260.dtsi" + +/ { + model = "Atmel at91sam9260ek"; + compatible = "atmel,at91sam9260ek", "atmel,at91sam9260", "atmel,at91sam9"; + + chosen { + stdout-path = &dbgu; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + mmc0: mmc@fffa8000 { + pinctrl-0 = < + &pinctrl_board_mmc0_slot1 + &pinctrl_mmc0_clk + &pinctrl_mmc0_slot1_cmd_dat0 + &pinctrl_mmc0_slot1_dat1_3>; + status = "okay"; + slot@1 { + reg = <1>; + bus-width = <4>; + cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>; + }; + }; + + usart0: serial@fffb0000 { + pinctrl-0 = + <&pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts + &pinctrl_usart0_dtr_dsr + &pinctrl_usart0_dcd + &pinctrl_usart0_ri>; + status = "okay"; + }; + + usart1: serial@fffb4000 { + status = "okay"; + }; + + ssc0: ssc@fffbc000 { + status = "okay"; + pinctrl-0 = <&pinctrl_ssc0_tx>; + }; + + macb0: ethernet@fffc4000 { + phy-mode = "rmii"; + status = "okay"; + }; + + spi0: spi@fffc8000 { + cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <50000000>; + reg = <1>; + }; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + pinctrl@fffff400 { + board { + pinctrl_board_mmc0_slot1: mmc0_slot1-board { + atmel,pins = + <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + }; + }; + + shdwc@fffffd10 { + atmel,wakeup-counter = <10>; + atmel,wakeup-rtt-timer; + }; + + rtc@fffffd20 { + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; + status = "okay"; + }; + + watchdog@fffffd40 { + status = "okay"; + }; + + gpbr: syscon@fffffd50 { + status = "okay"; + }; + }; + + usb0: ohci@500000 { + num-ports = <2>; + status = "okay"; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + btn3 { + label = "Button 3"; + gpios = <&pioA 30 GPIO_ACTIVE_LOW>; + linux,code = <0x103>; + gpio-key,wakeup; + }; + + btn4 { + label = "Button 4"; + gpios = <&pioA 31 GPIO_ACTIVE_LOW>; + linux,code = <0x104>; + gpio-key,wakeup; + }; + }; + + i2c-gpio-0 { + status = "okay"; + + 24c512@50 { + compatible = "24c512"; + reg = <0x50>; + }; + }; + + leds { + compatible = "gpio-leds"; + + ds1 { + label = "ds1"; + gpios = <&pioA 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + ds5 { + label = "ds5"; + gpios = <&pioA 6 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 5e09de4eb9cd..32752d7883f1 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -860,7 +860,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { compatible = "i2c-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c_bitbang>; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 93446420af25..aeb1a36373f4 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -1019,7 +1019,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { compatible = "i2c-gpio"; gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */ &pioB 5 GPIO_ACTIVE_HIGH /* scl */ diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 59df9d73d276..127cc42e9e29 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -215,7 +215,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { status = "okay"; 24c512@50 { diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index e9cc99b6353a..27847a47c108 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -170,13 +170,13 @@ }; }; - usb0: ohci@00500000 { + usb0: ohci@500000 { num-ports = <2>; status = "okay"; }; }; - i2c@0 { + i2c-gpio-0 { status = "okay"; 24c512@50 { diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index 707fd4ea58f5..91a71774472e 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -26,7 +26,24 @@ i2c0: i2c@f8010000 { ov2640: camera@0x30 { + compatible = "ovti,ov2640"; + reg = <0x30>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; + resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>; + pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>; + clocks = <&pck0>; + clock-names = "xvclk"; + assigned-clocks = <&pck0>; + assigned-clock-rates = <25000000>; status = "okay"; + + port { + ov2640_0: endpoint { + remote-endpoint = <&isi_0>; + bus-width = <8>; + }; + }; }; }; @@ -37,6 +54,15 @@ isi: isi@f8048000 { status = "okay"; + port { + isi_0: endpoint@0 { + reg = <0>; + remote-endpoint = <&ov2640_0>; + bus-width = <8>; + vsync-active = <1>; + hsync-active = <1>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 8837b7e4292c..b3501ae2a3bd 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -1044,28 +1044,24 @@ atmel,adc-res-names = "lowres", "highres"; atmel,adc-use-res = "highres"; - trigger@0 { - reg = <0>; + trigger0 { trigger-name = "external-rising"; trigger-value = <0x1>; trigger-external; }; - trigger@1 { - reg = <1>; + trigger1 { trigger-name = "external-falling"; trigger-value = <0x2>; trigger-external; }; - trigger@2 { - reg = <2>; + trigger2 { trigger-name = "external-any"; trigger-value = <0x3>; trigger-external; }; - trigger@3 { - reg = <3>; + trigger3 { trigger-name = "continuous"; trigger-value = <0x6>; }; @@ -1169,13 +1165,13 @@ clock-names = "pclk", "hclk"; status = "disabled"; - ep0 { + ep@0 { reg = <0>; atmel,fifo-size = <64>; atmel,nb-banks = <1>; }; - ep1 { + ep@1 { reg = <1>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -1183,7 +1179,7 @@ atmel,can-isoc; }; - ep2 { + ep@2 { reg = <2>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -1191,21 +1187,21 @@ atmel,can-isoc; }; - ep3 { + ep@3 { reg = <3>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; atmel,can-dma; }; - ep4 { + ep@4 { reg = <4>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; atmel,can-dma; }; - ep5 { + ep@5 { reg = <5>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -1213,7 +1209,7 @@ atmel,can-isoc; }; - ep6 { + ep@6 { reg = <6>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -1320,7 +1316,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { compatible = "i2c-gpio"; gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */ &pioA 21 GPIO_ACTIVE_HIGH /* scl */ diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 95569a87b6c9..3b3eb3edcb47 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -1030,7 +1030,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { compatible = "i2c-gpio"; gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */ &pioA 31 GPIO_ACTIVE_HIGH /* scl */ diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 6d829db4e887..70adf940d98c 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -265,25 +265,21 @@ atmel,adc-res-names = "lowres", "highres"; atmel,adc-use-res = "highres"; - trigger@0 { - reg = <0>; + trigger0 { trigger-name = "timer-counter-0"; trigger-value = <0x1>; }; - trigger@1 { - reg = <1>; + trigger1 { trigger-name = "timer-counter-1"; trigger-value = <0x3>; }; - trigger@2 { - reg = <2>; + trigger2 { trigger-name = "timer-counter-2"; trigger-value = <0x5>; }; - trigger@3 { - reg = <3>; + trigger3 { trigger-name = "external"; trigger-value = <0x13>; trigger-external; @@ -301,13 +297,13 @@ clock-names = "pclk", "hclk"; status = "disabled"; - ep0 { + ep@0 { reg = <0>; atmel,fifo-size = <64>; atmel,nb-banks = <1>; }; - ep1 { + ep@1 { reg = <1>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -315,7 +311,7 @@ atmel,can-isoc; }; - ep2 { + ep@2 { reg = <2>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -323,21 +319,21 @@ atmel,can-isoc; }; - ep3 { + ep@3 { reg = <3>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; atmel,can-dma; }; - ep4 { + ep@4 { reg = <4>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; atmel,can-dma; }; - ep5 { + ep@5 { reg = <5>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -345,7 +341,7 @@ atmel,can-isoc; }; - ep6 { + ep@6 { reg = <6>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -1093,7 +1089,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { compatible = "i2c-gpio"; gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */ <&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */ @@ -1107,7 +1103,7 @@ status = "disabled"; }; - i2c@1 { + i2c-gpio-1 { compatible = "i2c-gpio"; gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */ <&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */ diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index f10566f759cd..2e567d90fba8 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -227,11 +227,11 @@ }; }; - i2c@0 { + i2c-gpio-0 { status = "okay"; }; - i2c@1 { + i2c-gpio-1 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index cd0cd5fd09a3..ed4e4bd8a8f1 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -1048,29 +1048,25 @@ atmel,adc-res-names = "lowres", "highres"; atmel,adc-use-res = "highres"; - trigger@0 { - reg = <0>; + trigger0 { trigger-name = "external-rising"; trigger-value = <0x1>; trigger-external; }; - trigger@1 { - reg = <1>; + trigger1 { trigger-name = "external-falling"; trigger-value = <0x2>; trigger-external; }; - trigger@2 { - reg = <2>; + trigger2 { trigger-name = "external-any"; trigger-value = <0x3>; trigger-external; }; - trigger@3 { - reg = <3>; + trigger3 { trigger-name = "continuous"; trigger-value = <0x6>; }; @@ -1119,13 +1115,13 @@ clock-names = "hclk", "pclk"; status = "disabled"; - ep0 { + ep@0 { reg = <0>; atmel,fifo-size = <64>; atmel,nb-banks = <1>; }; - ep1 { + ep@1 { reg = <1>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -1133,7 +1129,7 @@ atmel,can-isoc; }; - ep2 { + ep@2 { reg = <2>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -1141,21 +1137,21 @@ atmel,can-isoc; }; - ep3 { + ep@3 { reg = <3>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; atmel,can-dma; }; - ep4 { + ep@4 { reg = <4>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; atmel,can-dma; }; - ep5 { + ep@5 { reg = <5>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -1163,7 +1159,7 @@ atmel,can-isoc; }; - ep6 { + ep@6 { reg = <6>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -1242,7 +1238,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { compatible = "i2c-gpio"; gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */ &pioA 31 GPIO_ACTIVE_HIGH /* scl */ @@ -1257,7 +1253,7 @@ status = "disabled"; }; - i2c@1 { + i2c-gpio-1 { compatible = "i2c-gpio"; gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */ &pioC 1 GPIO_ACTIVE_HIGH /* scl */ @@ -1272,7 +1268,7 @@ status = "disabled"; }; - i2c@2 { + i2c-gpio-2 { compatible = "i2c-gpio"; gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */ &pioB 5 GPIO_ACTIVE_HIGH /* scl */ diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index 52425a4ca97e..696b8ba064a6 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -60,18 +60,6 @@ status = "okay"; }; - isi: isi@f8048000 { - status = "disabled"; - port { - isi_0: endpoint@0 { - remote-endpoint = <&ov2640_0>; - bus-width = <8>; - vsync-active = <1>; - hsync-active = <1>; - }; - }; - }; - i2c0: i2c@f8010000 { status = "okay"; @@ -79,27 +67,6 @@ compatible = "wm8731"; reg = <0x1a>; }; - - ov2640: camera@0x30 { - compatible = "ovti,ov2640"; - reg = <0x30>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; - resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>; - pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>; - clocks = <&pck0>; - clock-names = "xvclk"; - assigned-clocks = <&pck0>; - assigned-clock-rates = <25000000>; - status = "disabled"; - - port { - ov2640_0: endpoint { - remote-endpoint = <&isi_0>; - bus-width = <8>; - }; - }; - }; }; adc0: adc@f804c000 { diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi index 051ab3ba9a65..afbe89c01df5 100644 --- a/arch/arm/boot/dts/axp209.dtsi +++ b/arch/arm/boot/dts/axp209.dtsi @@ -87,6 +87,7 @@ reg_ldo5: ldo5 { regulator-name = "ldo5"; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/axp22x.dtsi index 76302f58c478..458b6681e3ec 100644 --- a/arch/arm/boot/dts/axp22x.dtsi +++ b/arch/arm/boot/dts/axp22x.dtsi @@ -126,10 +126,12 @@ reg_ldo_io0: ldo_io0 { regulator-name = "ldo_io0"; + status = "disabled"; }; reg_ldo_io1: ldo_io1 { regulator-name = "ldo_io1"; + status = "disabled"; }; reg_rtc_ldo: rtc_ldo { @@ -139,5 +141,15 @@ regulator-max-microvolt = <3000000>; regulator-name = "rtc_ldo"; }; + + reg_drivevbus: drivevbus { + regulator-name = "drivevbus"; + status = "disabled"; + }; + }; + + usb_power_supply: usb_power_supply { + compatible = "x-powers,axp221-usb-power-supply"; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/axp809.dtsi b/arch/arm/boot/dts/axp809.dtsi new file mode 100644 index 000000000000..ab8e5f2d9246 --- /dev/null +++ b/arch/arm/boot/dts/axp809.dtsi @@ -0,0 +1,53 @@ +/* + * Copyright 2015 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * AXP809 Integrated Power Management Chip + */ + +&axp809 { + compatible = "x-powers,axp809"; + interrupt-controller; + #interrupt-cells = <1>; +}; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index b42fe5596b94..fabc9f36c408 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -366,5 +366,16 @@ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + + adc: adc@180a6000 { + compatible = "brcm,iproc-static-adc"; + #io-channel-cells = <1>; + io-channel-ranges; + adc-syscon = <&ts_adc_syscon>; + clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>; + clock-names = "tsc_clk"; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 6a40ed7d0502..c3bf7d23f136 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -57,7 +57,7 @@ compatible = "arm,cortex-a9"; next-level-cache = <&L2>; enable-method = "brcm,bcm-nsp-smp"; - secondary-boot-reg = <0xffff042c>; + secondary-boot-reg = <0xffff0fec>; reg = <0x1>; }; }; @@ -192,6 +192,23 @@ status = "disabled"; }; + dma@20000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20000 0x1000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + nand: nand@26000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x026000 0x600>, @@ -337,6 +354,18 @@ ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>; status = "disabled"; + + msi-parent = <&msi0>; + msi0: msi@18012000 { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>, + <GIC_SPI 128 IRQ_TYPE_NONE>, + <GIC_SPI 129 IRQ_TYPE_NONE>, + <GIC_SPI 130 IRQ_TYPE_NONE>; + brcm,pcie-msi-inten; + }; }; pcie1: pcie@18013000 { @@ -361,6 +390,18 @@ ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>; status = "disabled"; + + msi-parent = <&msi1>; + msi1: msi@18013000 { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 133 IRQ_TYPE_NONE>, + <GIC_SPI 134 IRQ_TYPE_NONE>, + <GIC_SPI 135 IRQ_TYPE_NONE>, + <GIC_SPI 136 IRQ_TYPE_NONE>; + brcm,pcie-msi-inten; + }; }; pcie2: pcie@18014000 { @@ -385,5 +426,17 @@ ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>; status = "disabled"; + + msi-parent = <&msi2>; + msi2: msi@18014000 { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>, + <GIC_SPI 140 IRQ_TYPE_NONE>, + <GIC_SPI 141 IRQ_TYPE_NONE>, + <GIC_SPI 142 IRQ_TYPE_NONE>; + brcm,pcie-msi-inten; + }; }; }; diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index 3dc7a8cc5812..18045c38bcf1 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -30,7 +30,6 @@ cpus { #address-cells = <1>; #size-cells = <0>; - enable-method = "brcm,bcm11351-cpu-method"; cpu0: cpu@0 { device_type = "cpu"; @@ -41,6 +40,7 @@ cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; + enable-method = "brcm,bcm11351-cpu-method"; secondary-boot-reg = <0x3500417c>; reg = <1>; }; diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi index 3f525be28fd0..6dde95f21cef 100644 --- a/arch/arm/boot/dts/bcm21664.dtsi +++ b/arch/arm/boot/dts/bcm21664.dtsi @@ -30,7 +30,6 @@ cpus { #address-cells = <1>; #size-cells = <0>; - enable-method = "brcm,bcm11351-cpu-method"; cpu0: cpu@0 { device_type = "cpu"; @@ -41,6 +40,7 @@ cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; + enable-method = "brcm,bcm11351-cpu-method"; secondary-boot-reg = <0x35004178>; reg = <1>; }; diff --git a/arch/arm/boot/dts/bcm23550-sparrow.dts b/arch/arm/boot/dts/bcm23550-sparrow.dts new file mode 100644 index 000000000000..4d525ccb48c8 --- /dev/null +++ b/arch/arm/boot/dts/bcm23550-sparrow.dts @@ -0,0 +1,80 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> + +#include "bcm23550.dtsi" + +/ { + model = "BCM23550 Sparrow board"; + compatible = "brcm,bcm23550-sparrow", "brcm,bcm23550"; + + chosen { + stdout-path = "/slaves@3e000000/serial@0:115200n8"; + bootargs = "console=ttyS0,115200n8"; + }; + + memory { + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; +}; + +&uartb { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&sdio1 { + max-frequency = <48000000>; + status = "okay"; +}; + +&sdio2 { + non-removable; + max-frequency = <48000000>; + status = "okay"; +}; + +&sdio4 { + max-frequency = <48000000>; + cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm23550.dtsi b/arch/arm/boot/dts/bcm23550.dtsi new file mode 100644 index 000000000000..a7a643f38385 --- /dev/null +++ b/arch/arm/boot/dts/bcm23550.dtsi @@ -0,0 +1,415 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/* BCM23550 and BCM21664 have almost identical clocks */ +#include "dt-bindings/clock/bcm21664.h" + +#include "skeleton.dtsi" + +/ { + model = "BCM23550 SoC"; + compatible = "brcm,bcm23550"; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0>; + clock-frequency = <1000000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + enable-method = "brcm,bcm23550"; + secondary-boot-reg = <0x35004178>; + reg = <1>; + clock-frequency = <1000000000>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + enable-method = "brcm,bcm23550"; + secondary-boot-reg = <0x35004178>; + reg = <2>; + clock-frequency = <1000000000>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + enable-method = "brcm,bcm23550"; + secondary-boot-reg = <0x35004178>; + reg = <3>; + clock-frequency = <1000000000>; + }; + }; + + /* Hub bus */ + hub@34000000 { + compatible = "simple-bus"; + ranges = <0 0x34000000 0x102f83ac>; + #address-cells = <1>; + #size-cells = <1>; + + smc@4e000 { + compatible = "brcm,bcm23550-smc", "brcm,kona-smc"; + reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */ + }; + + resetmgr: reset-controller@1001f00 { + compatible = "brcm,bcm21664-resetmgr"; + reg = <0x01001f00 0x24>; + }; + + gpio: gpio@1003000 { + compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio"; + reg = <0x01003000 0x524>; + interrupts = + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + timer@1006000 { + compatible = "brcm,kona-timer"; + reg = <0x01006000 0x1c>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>; + }; + }; + + /* Slaves bus */ + slaves@3e000000 { + compatible = "simple-bus"; + ranges = <0 0x3e000000 0x0001c070>; + #address-cells = <1>; + #size-cells = <1>; + + uartb: serial@0 { + compatible = "snps,dw-apb-uart"; + status = "disabled"; + reg = <0x00000000 0x118>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + uartb2: serial@1000 { + compatible = "snps,dw-apb-uart"; + status = "disabled"; + reg = <0x00001000 0x118>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + uartb3: serial@2000 { + compatible = "snps,dw-apb-uart"; + status = "disabled"; + reg = <0x00002000 0x118>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + bsc1: i2c@16000 { + compatible = "brcm,kona-i2c"; + reg = <0x00016000 0x70>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>; + status = "disabled"; + }; + + bsc2: i2c@17000 { + compatible = "brcm,kona-i2c"; + reg = <0x00017000 0x70>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>; + status = "disabled"; + }; + + bsc3: i2c@18000 { + compatible = "brcm,kona-i2c"; + reg = <0x00018000 0x70>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>; + status = "disabled"; + }; + + bsc4: i2c@1c000 { + compatible = "brcm,kona-i2c"; + reg = <0x0001c000 0x70>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>; + status = "disabled"; + }; + }; + + /* Apps bus */ + apps@3e300000 { + compatible = "simple-bus"; + ranges = <0 0x3e300000 0x01b77000>; + #address-cells = <1>; + #size-cells = <1>; + + usbotg: usb@e20000 { + compatible = "snps,dwc2"; + reg = <0x00e20000 0x10000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_otg_ahb_clk>; + clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usbphy: usb-phy@e30000 { + compatible = "brcm,kona-usb2-phy"; + reg = <0x00e30000 0x28>; + #phy-cells = <0>; + status = "disabled"; + }; + + sdio1: sdio@e80000 { + compatible = "brcm,kona-sdhci"; + reg = <0x00e80000 0x801c>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>; + status = "disabled"; + }; + + sdio2: sdio@e90000 { + compatible = "brcm,kona-sdhci"; + reg = <0x00e90000 0x801c>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>; + status = "disabled"; + }; + + sdio3: sdio@ea0000 { + compatible = "brcm,kona-sdhci"; + reg = <0x00ea0000 0x801c>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>; + status = "disabled"; + }; + + sdio4: sdio@eb0000 { + compatible = "brcm,kona-sdhci"; + reg = <0x00eb0000 0x801c>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>; + status = "disabled"; + }; + + cdc: cdc@1b0e000 { + compatible = "brcm,bcm23550-cdc"; + reg = <0x01b0e000 0x78>; + }; + + gic: interrupt-controller@1b21000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x01b21000 0x1000>, + <0x01b22000 0x1000>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * Fixed clocks are defined before CCUs whose + * clocks may depend on them. + */ + + ref_32k_clk: ref_32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + bbl_32k_clk: bbl_32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + ref_13m_clk: ref_13m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <13000000>; + }; + + var_13m_clk: var_13m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <13000000>; + }; + + dft_19_5m_clk: dft_19_5m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <19500000>; + }; + + ref_crystal_clk: ref_crystal { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; + + ref_52m_clk: ref_52m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; + }; + + var_52m_clk: var_52m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; + }; + + usb_otg_ahb_clk: usb_otg_ahb { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; + }; + + ref_96m_clk: ref_96m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <96000000>; + }; + + var_96m_clk: var_96m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <96000000>; + }; + + ref_104m_clk: ref_104m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104000000>; + }; + + var_104m_clk: var_104m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104000000>; + }; + + ref_156m_clk: ref_156m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <156000000>; + }; + + var_156m_clk: var_156m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <156000000>; + }; + + root_ccu: root_ccu { + compatible = BCM21664_DT_ROOT_CCU_COMPAT; + reg = <0x35001000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "frac_1m"; + }; + + aon_ccu: aon_ccu { + compatible = BCM21664_DT_AON_CCU_COMPAT; + reg = <0x35002000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "hub_timer"; + }; + + slave_ccu: slave_ccu { + compatible = BCM21664_DT_SLAVE_CCU_COMPAT; + reg = <0x3e011000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "uartb", + "uartb2", + "uartb3", + "bsc1", + "bsc2", + "bsc3", + "bsc4"; + }; + + master_ccu: master_ccu { + compatible = BCM21664_DT_MASTER_CCU_COMPAT; + reg = <0x3f001000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "sdio1", + "sdio2", + "sdio3", + "sdio4", + "sdio1_sleep", + "sdio2_sleep", + "sdio3_sleep", + "sdio4_sleep"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts index 57d313b6afaf..d5fdb8e761a3 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts @@ -1,6 +1,7 @@ /dts-v1/; #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" +#include "bcm283x-rpi-smsc9514.dtsi" / { compatible = "raspberrypi,model-b-plus", "brcm,bcm2835"; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts index cf2774ec0834..bfc4bd9b7733 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -1,6 +1,7 @@ /dts-v1/; #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" +#include "bcm283x-rpi-smsc9512.dtsi" / { compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835"; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 8b15f9c35643..0371bb7374b8 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -1,6 +1,7 @@ /dts-v1/; #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" +#include "bcm283x-rpi-smsc9512.dtsi" / { compatible = "raspberrypi,model-b", "brcm,bcm2835"; diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts index c4743f42237b..29e1cfe8eb14 100644 --- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts @@ -1,6 +1,7 @@ /dts-v1/; #include "bcm2836.dtsi" #include "bcm2835-rpi.dtsi" +#include "bcm283x-rpi-smsc9514.dtsi" / { compatible = "raspberrypi,2-model-b", "brcm,bcm2836"; diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi new file mode 100644 index 000000000000..12c981e51134 --- /dev/null +++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi @@ -0,0 +1,19 @@ +/ { + aliases { + ethernet = ðernet; + }; +}; + +&usb { + usb1@1 { + compatible = "usb424,9512"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@1 { + compatible = "usb424,ec00"; + reg = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi new file mode 100644 index 000000000000..3f0a56ebcf1f --- /dev/null +++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi @@ -0,0 +1,19 @@ +/ { + aliases { + ethernet = ðernet; + }; +}; + +&usb { + usb1@1 { + compatible = "usb424,9514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@1 { + compatible = "usb424,ec00"; + reg = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 10b27b912bac..b98252232d20 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -287,6 +287,8 @@ compatible = "brcm,bcm2835-usb"; reg = <0x7e980000 0x10000>; interrupts = <1 9>; + #address-cells = <1>; + #size-cells = <0>; }; v3d: v3d@7ec00000 { diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index 5087aa81efb1..9cb186ea2e97 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -147,3 +147,7 @@ &usb3 { vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>; }; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index 1049ab108b32..8ce39d58eeb8 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -90,3 +90,7 @@ &usb3 { vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; }; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts index 3a94606d042b..6229ef283c41 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -82,3 +82,7 @@ }; }; }; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index 8b0c440b2e71..70f4bb9d864a 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -126,3 +126,43 @@ &spi_nor { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts index 791d7225c733..0653e7ef248c 100644 --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -131,3 +131,7 @@ &usb2 { vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>; }; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index ace38efd2db3..c8c0b3616935 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -10,7 +10,7 @@ /dts-v1/; #include "bcm4708.dtsi" -#include "bcm5301x-nand-cs0-bch8.dtsi" +#include "bcm5301x-nand-cs0-bch1.dtsi" / { compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708"; @@ -113,3 +113,7 @@ &usb3 { vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; }; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi new file mode 100644 index 000000000000..24b099c00f13 --- /dev/null +++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi @@ -0,0 +1,15 @@ +/* + * Broadcom Northstar NAND. + * + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal.milecki@gmail.com> + * + * Licensed under the ISC license. + */ + +#include "bcm5301x-nand-cs0.dtsi" + +&nandcs { + nand-ecc-algo = "bch"; + nand-ecc-strength = <1>; + nand-ecc-step-size = <512>; +}; diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi index d10781e36f54..9a9630ded306 100644 --- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi +++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi @@ -9,16 +9,10 @@ * Licensed under the GNU/GPL. See COPYING for details. */ -/ { - nand@18028000 { - nandcs@0 { - compatible = "brcm,nandcs"; - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; +#include "bcm5301x-nand-cs0.dtsi" - nand-ecc-strength = <8>; - nand-ecc-step-size = <512>; - }; - }; +&nandcs { + nand-ecc-algo = "bch"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; }; diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi new file mode 100644 index 000000000000..168495106b82 --- /dev/null +++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi @@ -0,0 +1,18 @@ +/* + * Broadcom Northstar NAND. + * + * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/ { + nand@18028000 { + nandcs: nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 7d4d29bf0ed3..8af47913b3b4 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -153,6 +153,21 @@ /* ChipCommon */ <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + /* Switch Register Access Block */ + <0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + /* PCIe Controller 0 */ <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, @@ -239,6 +254,22 @@ status = "disabled"; }; }; + + gmac0: ethernet@24000 { + reg = <0x24000 0x800>; + }; + + gmac1: ethernet@25000 { + reg = <0x25000 0x800>; + }; + + gmac2: ethernet@26000 { + reg = <0x26000 0x800>; + }; + + gmac3: ethernet@27000 { + reg = <0x27000 0x800>; + }; }; lcpll0: lcpll0@1800c100 { @@ -260,6 +291,22 @@ "sata2"; }; + srab: srab@18007000 { + compatible = "brcm,bcm5301x-srab"; + reg = <0x18007000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + /* ports are defined in board DTS */ + }; + + rng: rng@18004000 { + compatible = "brcm,bcm5301x-rng"; + reg = <0x18004000 0x14>; + }; + nand: nand@18028000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>; diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts new file mode 100644 index 000000000000..0a9abecf9423 --- /dev/null +++ b/arch/arm/boot/dts/bcm953012er.dts @@ -0,0 +1,104 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + model = "NorthStar Enterprise Router (BCM953012ER)"; + compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x00000000 0x8000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&spi_nor { + status = "okay"; +}; + +&srab { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "port0"; + }; + + port@1 { + reg = <1>; + label = "port1"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts new file mode 100644 index 000000000000..d257e83dedfc --- /dev/null +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -0,0 +1,109 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-nsp.dtsi" + +/ { + model = "NorthStar Plus XMC (BCM958525xmc)"; + compatible = "brcm,bcm58525", "brcm,nsp"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&nand { + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "ncustfs"; + reg = <0x04000000 0x3c000000>; + }; + }; +}; + +/* XHCI, SATA, MMC, and Ethernet support needed to be complete */ + +&uart0 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>; + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; +}; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts new file mode 100644 index 000000000000..03b8bbeb694f --- /dev/null +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -0,0 +1,111 @@ +/* + * BSD LICENSE + * + * Copyright (c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-nsp.dtsi" + +/ { + model = "NorthStar Plus SVK (BCM958625HR)"; + compatible = "brcm,bcm58625", "brcm,nsp"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x60000000 0x20000000>; + }; +}; + +&nand { + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "ncustfs"; + reg = <0x04000000 0x3c000000>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>; + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; +}; diff --git a/arch/arm/boot/dts/compulab-sb-som.dtsi b/arch/arm/boot/dts/compulab-sb-som.dtsi index 93d7e235bc80..4af1adfee788 100644 --- a/arch/arm/boot/dts/compulab-sb-som.dtsi +++ b/arch/arm/boot/dts/compulab-sb-som.dtsi @@ -40,7 +40,7 @@ }; }; - hdmi_conn: connector@0 { + hdmi_conn: connector { compatible = "hdmi-connector"; label = "hdmi"; diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index f23cae0c2179..68e412c9863c 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -448,7 +448,7 @@ reg = <0x49000000 0x10000>; reg-names = "edma3_cc"; interrupts = <12 13 14>; - interrupt-names = "edma3_ccint", "emda3_mperr", + interrupt-names = "edma3_ccint", "edma3_mperr", "edma3_ccerrint"; dma-requests = <64>; #dma-cells = <2>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index de559f6e4fee..d9bfb94a2992 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -73,6 +73,49 @@ interrupt-parent = <&gic>; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + + operating-points-v2 = <&cpu0_opp_table>; + ti,syscon-efuse = <&scm_wkup 0x20c 0xf80000 19>; + ti,syscon-rev = <&scm_wkup 0x204>; + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + + /* cooling options */ + cooling-min-level = <0>; + cooling-max-level = <2>; + #cooling-cells = <2>; /* min followed by max */ + }; + }; + + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp_nom@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1060000 850000 1150000>; + opp-supported-hw = <0xFF 0x01>; + opp-suspend; + }; + + opp_od@1176000000 { + opp-hz = /bits/ 64 <1176000000>; + opp-microvolt = <1160000 885000 1160000>; + opp-supported-hw = <0xFF 0x02>; + }; + }; + /* * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. @@ -233,6 +276,11 @@ prm_clockdomains: clockdomains { }; }; + + scm_wkup: scm_conf@c000 { + compatible = "syscon"; + reg = <0xc000 0x1000>; + }; }; axi@0 { @@ -276,7 +324,7 @@ ranges = <0x51800000 0x51800000 0x3000 0x0 0x30000000 0x10000000>; status = "disabled"; - pcie@51000000 { + pcie@51800000 { compatible = "ti,dra7-pcie"; reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>; reg-names = "rc_dbics", "ti_conf", "config"; @@ -304,6 +352,53 @@ }; }; + ocmcram1: ocmcram@40300000 { + compatible = "mmio-sram"; + reg = <0x40300000 0x80000>; + ranges = <0x0 0x40300000 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + /* + * This is a placeholder for an optional reserved + * region for use by secure software. The size + * of this region is not known until runtime so it + * is set as zero to either be updated to reserve + * space or left unchanged to leave all SRAM for use. + * On HS parts that that require the reserved region + * either the bootloader can update the size to + * the required amount or the node can be overridden + * from the board dts file for the secure platform. + */ + sram-hs@0 { + compatible = "ti,secure-ram"; + reg = <0x0 0x0>; + }; + }; + + /* + * NOTE: ocmcram2 and ocmcram3 are not available on all + * DRA7xx and AM57xx variants. Confirm availability in + * the data manual for the exact part number in use + * before enabling these nodes in the board dts file. + */ + ocmcram2: ocmcram@40400000 { + status = "disabled"; + compatible = "mmio-sram"; + reg = <0x40400000 0x100000>; + ranges = <0x0 0x40400000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ocmcram3: ocmcram@40500000 { + status = "disabled"; + compatible = "mmio-sram"; + reg = <0x40500000 0x100000>; + ranges = <0x0 0x40500000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + }; + bandgap: bandgap@4a0021e0 { reg = <0x4a0021e0 0xc 0x4a00232c 0xc @@ -341,7 +436,7 @@ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma3_ccint", "emda3_mperr", + interrupt-names = "edma3_ccint", "edma3_mperr", "edma3_ccerrint"; dma-requests = <64>; #dma-cells = <2>; @@ -1744,6 +1839,149 @@ clock-names = "fck", "sys_clk"; }; }; + + epwmss0: epwmss@4843e000 { + compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; + reg = <0x4843e000 0x30>; + ti,hwmods = "epwmss0"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges; + + ehrpwm0: pwm@4843e200 { + compatible = "ti,dra746-ehrpwm", + "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x4843e200 0x80>; + clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + + ecap0: ecap@4843e100 { + compatible = "ti,dra746-ecap", + "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x4843e100 0x80>; + clocks = <&l4_root_clk_div>; + clock-names = "fck"; + status = "disabled"; + }; + }; + + epwmss1: epwmss@48440000 { + compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; + reg = <0x48440000 0x30>; + ti,hwmods = "epwmss1"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges; + + ehrpwm1: pwm@48440200 { + compatible = "ti,dra746-ehrpwm", + "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x48440200 0x80>; + clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + + ecap1: ecap@48440100 { + compatible = "ti,dra746-ecap", + "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x48440100 0x80>; + clocks = <&l4_root_clk_div>; + clock-names = "fck"; + status = "disabled"; + }; + }; + + epwmss2: epwmss@48442000 { + compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; + reg = <0x48442000 0x30>; + ti,hwmods = "epwmss2"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges; + + ehrpwm2: pwm@48442200 { + compatible = "ti,dra746-ehrpwm", + "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x48442200 0x80>; + clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + + ecap2: ecap@48442100 { + compatible = "ti,dra746-ecap", + "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x48442100 0x80>; + clocks = <&l4_root_clk_div>; + clock-names = "fck"; + status = "disabled"; + }; + }; + + aes1: aes@4b500000 { + compatible = "ti,omap4-aes"; + ti,hwmods = "aes1"; + reg = <0x4b500000 0xa0>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>; + dma-names = "tx", "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; + + aes2: aes@4b700000 { + compatible = "ti,omap4-aes"; + ti,hwmods = "aes2"; + reg = <0x4b700000 0xa0>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>; + dma-names = "tx", "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; + + des: des@480a5000 { + compatible = "ti,omap4-des"; + ti,hwmods = "des"; + reg = <0x480a5000 0xa0>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma_xbar 117>, <&sdma_xbar 116>; + dma-names = "tx", "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; + + sham: sham@53100000 { + compatible = "ti,omap5-sham"; + ti,hwmods = "sham"; + reg = <0x4b101000 0x300>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&edma_xbar 119 0>; + dma-names = "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; + + rng: rng@48090000 { + compatible = "ti,omap4-rng"; + ti,hwmods = "rng"; + reg = <0x48090000 0x2000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; }; thermal_zones: thermal-zones { diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index 093538ea5b5f..9d3cf50ca37e 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -18,7 +18,7 @@ display0 = &hdmi0; }; - evm_3v3: fixedregulator-evm_3v3 { + evm_3v3_sw: fixedregulator-evm_3v3 { compatible = "regulator-fixed"; regulator-name = "evm_3v3"; regulator-min-microvolt = <3300000>; @@ -29,7 +29,7 @@ /* TPS77018DBVT */ compatible = "regulator-fixed"; regulator-name = "aic_dvdd"; - vin-supply = <&evm_3v3>; + vin-supply = <&evm_3v3_sw>; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; @@ -414,9 +414,9 @@ status = "okay"; /* Regulators */ - AVDD-supply = <&evm_3v3>; - IOVDD-supply = <&evm_3v3>; - DRVDD-supply = <&evm_3v3>; + AVDD-supply = <&evm_3v3_sw>; + IOVDD-supply = <&evm_3v3_sw>; + DRVDD-supply = <&evm_3v3_sw>; DVDD-supply = <&aic_dvdd>; }; }; @@ -597,7 +597,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins_default>; - vmmc-supply = <&evm_3v3>; + vmmc-supply = <&evm_3v3_sw>; bus-width = <8>; ti,non-removable; max-frequency = <192000000>; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index 70a217050a4c..67107605fb4c 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -12,22 +12,6 @@ / { compatible = "ti,dra722", "ti,dra72", "ti,dra7"; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0>; - - /* cooling options */ - cooling-min-level = <0>; - cooling-max-level = <2>; - #cooling-cells = <2>; /* min followed by max */ - }; - }; - pmu { compatible = "arm,cortex-a15-pmu"; interrupt-parent = <&wakeupgen>; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 5e06020f450b..8987b3e180a1 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -13,34 +13,11 @@ compatible = "ti,dra742", "ti,dra74", "ti,dra7"; cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0>; - - operating-points = < - /* kHz uV */ - 1000000 1060000 - 1176000 1160000 - >; - - clocks = <&dpll_mpu_ck>; - clock-names = "cpu"; - - clock-latency = <300000>; /* From omap-cpufreq driver */ - - /* cooling options */ - cooling-min-level = <0>; - cooling-max-level = <2>; - #cooling-cells = <2>; /* min followed by max */ - }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <1>; + operating-points-v2 = <&cpu0_opp_table>; }; }; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index a35b851e1cd7..60d0a732833a 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -18,14 +18,18 @@ model = "EMEV2 KZM9D Board"; compatible = "renesas,kzm9d", "renesas,emev2"; - memory { + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x8000000>; }; + aliases { + serial1 = &uart1; + }; + chosen { - bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp"; - stdout-path = &uart1; + bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp"; + stdout-path = "serial1:115200n8"; }; gpio_keys { @@ -33,28 +37,28 @@ #address-cells = <1>; #size-cells = <0>; - button@1 { + one { debounce_interval = <50>; wakeup-source; label = "DSW2-1"; linux,code = <KEY_1>; gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; }; - button@2 { + two { debounce_interval = <50>; wakeup-source; label = "DSW2-2"; linux,code = <KEY_2>; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; - button@3 { + three { debounce_interval = <50>; wakeup-source; label = "DSW2-3"; linux,code = <KEY_3>; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; }; - button@4 { + four { debounce_interval = <50>; wakeup-source; label = "DSW2-4"; @@ -63,7 +67,7 @@ }; }; - reg_1p8v: regulator@0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -72,7 +76,7 @@ regulator-boot-on; }; - reg_3p3v: regulator@1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -104,7 +108,7 @@ }; &pfc { - uart1_pins: serial@e1030000 { + uart1_pins: uart1 { groups = "uart1_ctrl", "uart1_data"; function = "uart1"; }; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index bcce6f50c93d..cd119400f440 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -69,25 +69,25 @@ clock-frequency = <32768>; #clock-cells = <0>; }; - iic0_sclkdiv: iic0_sclkdiv { + iic0_sclkdiv: iic0_sclkdiv@624,0 { compatible = "renesas,emev2-smu-clkdiv"; reg = <0x624 0>; clocks = <&pll3_fo>; #clock-cells = <0>; }; - iic0_sclk: iic0_sclk { + iic0_sclk: iic0_sclk@48c,1 { compatible = "renesas,emev2-smu-gclk"; reg = <0x48c 1>; clocks = <&iic0_sclkdiv>; #clock-cells = <0>; }; - iic1_sclkdiv: iic1_sclkdiv { + iic1_sclkdiv: iic1_sclkdiv@624,16 { compatible = "renesas,emev2-smu-clkdiv"; reg = <0x624 16>; clocks = <&pll3_fo>; #clock-cells = <0>; }; - iic1_sclk: iic1_sclk { + iic1_sclk: iic1_sclk@490,1 { compatible = "renesas,emev2-smu-gclk"; reg = <0x490 1>; clocks = <&iic1_sclkdiv>; @@ -100,55 +100,55 @@ clock-mult = <7000>; #clock-cells = <0>; }; - usia_u0_sclkdiv: usia_u0_sclkdiv { + usia_u0_sclkdiv: usia_u0_sclkdiv@610,0 { compatible = "renesas,emev2-smu-clkdiv"; reg = <0x610 0>; clocks = <&pll3_fo>; #clock-cells = <0>; }; - usib_u1_sclkdiv: usib_u1_sclkdiv { + usib_u1_sclkdiv: usib_u1_sclkdiv@65c,0 { compatible = "renesas,emev2-smu-clkdiv"; reg = <0x65c 0>; clocks = <&pll3_fo>; #clock-cells = <0>; }; - usib_u2_sclkdiv: usib_u2_sclkdiv { + usib_u2_sclkdiv: usib_u2_sclkdiv@65c,16 { compatible = "renesas,emev2-smu-clkdiv"; reg = <0x65c 16>; clocks = <&pll3_fo>; #clock-cells = <0>; }; - usib_u3_sclkdiv: usib_u3_sclkdiv { + usib_u3_sclkdiv: usib_u3_sclkdiv@660,0 { compatible = "renesas,emev2-smu-clkdiv"; reg = <0x660 0>; clocks = <&pll3_fo>; #clock-cells = <0>; }; - usia_u0_sclk: usia_u0_sclk { + usia_u0_sclk: usia_u0_sclk@4a0,1 { compatible = "renesas,emev2-smu-gclk"; reg = <0x4a0 1>; clocks = <&usia_u0_sclkdiv>; #clock-cells = <0>; }; - usib_u1_sclk: usib_u1_sclk { + usib_u1_sclk: usib_u1_sclk@4b8,1 { compatible = "renesas,emev2-smu-gclk"; reg = <0x4b8 1>; clocks = <&usib_u1_sclkdiv>; #clock-cells = <0>; }; - usib_u2_sclk: usib_u2_sclk { + usib_u2_sclk: usib_u2_sclk@4bc,1 { compatible = "renesas,emev2-smu-gclk"; reg = <0x4bc 1>; clocks = <&usib_u2_sclkdiv>; #clock-cells = <0>; }; - usib_u3_sclk: usib_u3_sclk { + usib_u3_sclk: usib_u3_sclk@4c0,1 { compatible = "renesas,emev2-smu-gclk"; reg = <0x4c0 1>; clocks = <&usib_u3_sclkdiv>; #clock-cells = <0>; }; - sti_sclk: sti_sclk { + sti_sclk: sti_sclk@528,1 { compatible = "renesas,emev2-smu-gclk"; reg = <0x528 1>; clocks = <&c32ki>; diff --git a/arch/arm/boot/dts/ep7209.dtsi b/arch/arm/boot/dts/ep7209.dtsi new file mode 100644 index 000000000000..aaf1261d2ee4 --- /dev/null +++ b/arch/arm/boot/dts/ep7209.dtsi @@ -0,0 +1,191 @@ +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + */ + +/dts-v1/; + +#include "skeleton.dtsi" + +#include <dt-bindings/clock/clps711x-clock.h> + +/ { + model = "Cirrus Logic EP7209"; + compatible = "cirrus,ep7209"; + + aliases { + gpio0 = &porta; + gpio1 = &portb; + gpio3 = &portd; + gpio4 = &porte; + serial0 = &uart1; + serial1 = &uart2; + spi0 = &spi; + timer0 = &timer1; + timer1 = &timer2; + }; + + cpus { + #address-cells = <0>; + #size-cells = <0>; + + cpu { + device_type = "cpu"; + compatible = "arm,arm720t"; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + ranges; + + clks: clks@80000000 { + #clock-cells = <1>; + compatible = "cirrus,ep7209-clk"; + reg = <0x80000000 0xc000>; + startup-frequency = <73728000>; + }; + + intc: intc@80000000 { + compatible = "cirrus,ep7209-intc"; + reg = <0x80000000 0x4000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + porta: gpio@80000000 { + compatible = "cirrus,ep7209-gpio"; + reg = <0x80000000 0x1 0x80000040 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + + portb: gpio@80000001 { + compatible = "cirrus,ep7209-gpio"; + reg = <0x80000001 0x1 0x80000041 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + + portd: gpio@80000003 { + compatible = "cirrus,ep7209-gpio"; + reg = <0x80000003 0x1 0x80000043 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + + porte: gpio@80000083 { + compatible = "cirrus,ep7209-gpio"; + reg = <0x80000083 0x1 0x800000c3 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + + syscon1: syscon@80000100 { + compatible = "cirrus,ep7209-syscon1", "syscon"; + reg = <0x80000100 0x80>; + }; + + bus: bus@80000180 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "cirrus,ep7209-bus", "simple-bus"; + clocks = <&clks CLPS711X_CLK_BUS>; + reg = <0x80000180 0x80>; + ranges = < + 0 0 0x00000000 0x10000000 + 1 0 0x10000000 0x10000000 + 2 0 0x20000000 0x10000000 + 3 0 0x30000000 0x10000000 + 4 0 0x40000000 0x10000000 + 5 0 0x50000000 0x10000000 + 6 0 0x60000000 0x0000c000 + 7 0 0x70000000 0x00000080 + >; + }; + + fb: fb@800002c0 { + compatible = "cirrus,ep7209-fb"; + reg = <0x800002c0 0xd44>, <0x60000000 0xc000>; + clocks = <&clks CLPS711X_CLK_BUS>; + status = "disabled"; + }; + + timer1: timer@80000300 { + compatible = "cirrus,ep7209-timer"; + reg = <0x80000300 0x4>; + clocks = <&clks CLPS711X_CLK_TIMER1>; + interrupts = <8>; + }; + + timer2: timer@80000340 { + compatible = "cirrus,ep7209-timer"; + reg = <0x80000340 0x4>; + clocks = <&clks CLPS711X_CLK_TIMER2>; + interrupts = <9>; + }; + + pwm: pwm@80000400 { + compatible = "cirrus,ep7209-pwm"; + reg = <0x80000400 0x4>; + clocks = <&clks CLPS711X_CLK_PWM>; + #pwm-cells = <1>; + }; + + uart1: uart@80000480 { + compatible = "cirrus,ep7209-uart"; + reg = <0x80000480 0x80>; + interrupts = <12 13>; + clocks = <&clks CLPS711X_CLK_UART>; + syscon = <&syscon1>; + }; + + spi: spi@80000500 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "cirrus,ep7209-spi"; + reg = <0x80000500 0x4>; + interrupts = <15>; + clocks = <&clks CLPS711X_CLK_SPI>; + status = "disabled"; + }; + + syscon2: syscon@80001100 { + compatible = "cirrus,ep7209-syscon2", "syscon"; + reg = <0x80001100 0x80>; + }; + + uart2: uart@80001480 { + compatible = "cirrus,ep7209-uart"; + reg = <0x80001480 0x80>; + interrupts = <28 29>; + clocks = <&clks CLPS711X_CLK_UART>; + syscon = <&syscon2>; + }; + + dai: dai@80002000 { + #sound-dai-cells = <0>; + compatible = "cirrus,ep7209-dai"; + reg = <0x80002000 0x604>; + clocks = <&clks CLPS711X_CLK_PLL>; + clock-names = "pll"; + interrupts = <32>; + status = "disabled"; + }; + + syscon3: syscon@80002200 { + compatible = "cirrus,ep7209-syscon3", "syscon"; + reg = <0x80002200 0x40>; + }; + }; + + mctrl: mctrl { + compatible = "cirrus,ep7209-mctrl-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; +}; diff --git a/arch/arm/boot/dts/ep7211-edb7211.dts b/arch/arm/boot/dts/ep7211-edb7211.dts new file mode 100644 index 000000000000..9a134ed271eb --- /dev/null +++ b/arch/arm/boot/dts/ep7211-edb7211.dts @@ -0,0 +1,100 @@ +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + */ + +#include "ep7211.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Cirrus Logic EP7211 Development Board"; + compatible = "cirrus,edb7211", "cirrus,ep7211", "cirrus,ep7209"; + + memory { + reg = <0xc0000000 0x02000000>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0>; + brightness-levels = < + 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 + 0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf + >; + default-brightness-level = <0x0>; + power-supply = <&blen>; + }; + + display: display { + model = "320x240x4"; + native-mode = <&timing0>; + bits-per-pixel = <4>; + ac-prescale = <17>; + + display-timings { + timing0: 320x240 { + hactive = <320>; + hback-porch = <0>; + hfront-porch = <0>; + hsync-len = <0>; + vactive = <240>; + vback-porch = <0>; + vfront-porch = <0>; + vsync-len = <0>; + clock-frequency = <6500000>; + }; + }; + }; + + i2c: i2c { + compatible = "i2c-gpio"; + gpios = <&portd 4 GPIO_ACTIVE_HIGH>, + <&portd 5 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <2>; + i2c-gpio,scl-output-only; + #address-cells = <1>; + #size-cells = <0>; + }; + + lcddc: lcddc { + compatible = "regulator-fixed"; + regulator-name = "BACKLIGHT ENABLE"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&portd 1 GPIO_ACTIVE_HIGH>; + }; + + blen: blen { + compatible = "regulator-fixed"; + regulator-name = "BACKLIGHT ENABLE"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&portd 3 GPIO_ACTIVE_HIGH>; + }; +}; + +&bus { + flash: nor@00000000 { + compatible = "cfi-flash"; + reg = <0 0x00000000 0x02000000>; + bank-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&fb { + display = <&display>; + lcd-supply = <&lcddc>; + status = "okay"; +}; + +&portd { + lcden { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "LCD ENABLE"; + }; +}; diff --git a/arch/arm/boot/dts/ep7211.dtsi b/arch/arm/boot/dts/ep7211.dtsi new file mode 100644 index 000000000000..e438f6db0673 --- /dev/null +++ b/arch/arm/boot/dts/ep7211.dtsi @@ -0,0 +1,12 @@ +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + */ + +#include "ep7209.dtsi" + +/ { + model = "Cirrus Logic EP7211"; + compatible = "cirrus,ep7211", "cirrus,ep7209"; +}; diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts index 243044343ee8..4687229a3ab9 100644 --- a/arch/arm/boot/dts/ethernut5.dts +++ b/arch/arm/boot/dts/ethernut5.dts @@ -77,13 +77,13 @@ }; }; - usb0: ohci@00500000 { + usb0: ohci@500000 { num-ports = <2>; status = "okay"; }; }; - i2c@0 { + i2c-gpio-0 { status = "okay"; pcf8563@50 { diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts index f72969efe6d7..20a4481b6e12 100644 --- a/arch/arm/boot/dts/evk-pro3.dts +++ b/arch/arm/boot/dts/evk-pro3.dts @@ -46,13 +46,13 @@ }; }; - usb0: ohci@00500000 { + usb0: ohci@500000 { num-ports = <2>; status = "okay"; }; }; - i2c@0 { + i2c-gpio-0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi index c4d063ae6b74..f78c14c82e17 100644 --- a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi +++ b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi @@ -14,16 +14,22 @@ #size-cells = <1>; ranges; - mfc_left: region@51000000 { + mfc_left: region_mfc_left { compatible = "shared-dma-pool"; no-map; - reg = <0x51000000 0x800000>; + size = <0x1000000>; + alignment = <0x100000>; }; - mfc_right: region@43000000 { + mfc_right: region_mfc_right { compatible = "shared-dma-pool"; no-map; - reg = <0x43000000 0x800000>; + size = <0x800000>; + alignment = <0x100000>; }; }; }; + +&mfc { + memory-region = <&mfc_left>, <&mfc_right>; +}; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index e422819591dc..a92181368e5b 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -632,10 +632,6 @@ status = "okay"; }; -&mfc { - status = "okay"; -}; - &jpeg { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 62f3dcd9e046..70e3aceab3a9 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -431,7 +431,6 @@ clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>; power-domains = <&pd_mfc>; iommus = <&sysmmu_mfc>; - status = "disabled"; }; sysmmu_mfc: sysmmu@13620000 { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index ca8f3e3cf2f3..32f22e12c70b 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -428,7 +428,6 @@ clock-names = "mfc", "sclk_mfc"; iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; iommu-names = "left", "right"; - status = "disabled"; }; serial_0: serial@13800000 { diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index f5e4eb23aa21..be2751eebaf8 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -288,11 +288,6 @@ }; }; -&mfc { - memory-region = <&mfc_left>, <&mfc_right>; - status = "okay"; -}; - &sdhci_0 { bus-width = <4>; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index de917f0d907d..847fae3dd1f1 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -133,11 +133,6 @@ }; }; -&mfc { - memory-region = <&mfc_left>, <&mfc_right>; - status = "okay"; -}; - &pinctrl_1 { keypad_rows: keypad-rows { samsung,pins = "gpx2-0", "gpx2-1"; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 276ac9a7bb82..58ad48e7b8f7 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -298,7 +298,6 @@ regulator-name = "VDDQ_MMC2_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - regulator-always-on; regulator-boot-on; }; @@ -391,10 +390,18 @@ }; ldo21_reg: LDO21 { - regulator-name = "LDO21_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; + regulator-name = "TFLASH_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + }; + + ldo22_reg: LDO22 { + /* + * Only U3 uses it, so let it define the + * constraints + */ + regulator-name = "LDO22"; regulator-boot-on; }; @@ -461,9 +468,11 @@ }; buck8_reg: BUCK8 { + /* + * Constraints set by specific board: X, + * X2 and U3. + */ regulator-name = "BUCK8_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; }; }; }; @@ -500,11 +509,6 @@ clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; }; -&mfc { - memory-region = <&mfc_left>, <&mfc_right>; - status = "okay"; -}; - &mixer { status = "okay"; }; @@ -512,7 +516,7 @@ &mshc_0 { pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; - vmmc-supply = <&ldo20_reg &buck8_reg>; + vmmc-supply = <&ldo20_reg>; mmc-pwrseq = <&emmc_pwrseq>; status = "okay"; @@ -536,7 +540,8 @@ bus-width = <4>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; pinctrl-names = "default"; - vmmc-supply = <&ldo4_reg &ldo21_reg>; + vmmc-supply = <&ldo21_reg>; + vqmmc-supply = <&ldo4_reg>; cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>; cd-inverted; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index dd89f7b37c9f..d73aa6c58fe3 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -69,6 +69,24 @@ }; }; +/* Supply for LAN9730/SMSC95xx */ +&buck8_reg { + regulator-name = "BUCK8_P3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; +}; + +/* VDDQ for MSHC (eMMC card) */ +&ldo22_reg { + regulator-name = "LDO22_VDDQ_MMC4_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +&mshc_0 { + vqmmc-supply = <&ldo22_reg>; +}; + &pwm { pinctrl-0 = <&pwm0_out>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index bf7b21b817e4..2af235151301 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -63,12 +63,23 @@ }; }; +/* VDDQ for MSHC (eMMC card) */ +&buck8_reg { + regulator-name = "BUCK8_VDDQ_MMC4_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + &ehci { port@1 { status = "okay"; }; }; +&mshc_0 { + vqmmc-supply = <&buck8_reg>; +}; + &pinctrl_1 { gpio_home_key: home_key { samsung,pins = "gpx2-2"; diff --git a/arch/arm/boot/dts/exynos4412-odroidx2.dts b/arch/arm/boot/dts/exynos4412-odroidx2.dts index 6e33678562ae..3e3584270e00 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx2.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx2.dts @@ -22,6 +22,17 @@ }; }; +/* VDDQ for MSHC (eMMC card) */ +&buck8_reg { + regulator-name = "BUCK8_VDDQ_MMC4_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +&mshc_0 { + vqmmc-supply = <&buck8_reg>; +}; + &sound { simple-audio-card,name = "Odroid-X2"; simple-audio-card,widgets = diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index cd363d7e4e34..26a36fed9652 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -84,6 +84,22 @@ cpu0-supply = <&buck2_reg>; }; +&exynos_usbphy { + status = "okay"; +}; + +&ehci { + samsung,vbus-gpio = <&gpx3 5 1>; + status = "okay"; + + port@1{ + status = "okay"; + }; + port@2 { + status = "okay"; + }; +}; + &fimd { pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; pinctrl-names = "default"; @@ -466,11 +482,6 @@ }; }; -&mfc { - memory-region = <&mfc_left>, <&mfc_right>; - status = "okay"; -}; - &mshc_0 { pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index 9b6d561dbdac..231ffbdbf9d0 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -112,11 +112,6 @@ }; }; -&mfc { - memory-region = <&mfc_left>, <&mfc_right>; - status = "okay"; -}; - &pinctrl_1 { keypad_rows: keypad-rows { samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2"; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 9336fd4824d9..129e973a06a6 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -253,7 +253,7 @@ }; thermistor-ap { - compatible = "ntc,ncp15wb473"; + compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; /* VCC_1.8V_AP */ pullup-ohm = <100000>; /* 100K */ pulldown-ohm = <100000>; /* 100K */ @@ -261,7 +261,7 @@ }; thermistor-battery { - compatible = "ntc,ncp15wb473"; + compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; /* VCC_1.8V_AP */ pullup-ohm = <100000>; /* 100K */ pulldown-ohm = <100000>; /* 100K */ diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index d5c0f18a4223..cab91782e20c 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -20,97 +20,160 @@ interrupt-parent = <&gic>; aliases { + i2c0 = &i2c_0; + i2c1 = &i2c_1; + i2c2 = &i2c_2; + i2c3 = &i2c_3; serial0 = &serial_0; serial1 = &serial_1; serial2 = &serial_2; serial3 = &serial_3; }; - chipid@10000000 { - compatible = "samsung,exynos4210-chipid"; - reg = <0x10000000 0x100>; - }; + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; - memory-controller@12250000 { - compatible = "samsung,exynos4210-srom"; - reg = <0x12250000 0x14>; - }; + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; - combiner: interrupt-controller@10440000 { - compatible = "samsung,exynos4210-combiner"; - #interrupt-cells = <2>; - interrupt-controller; - samsung,combiner-nr = <32>; - reg = <0x10440000 0x1000>; - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, - <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, - <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; - }; + sromc: memory-controller@12250000 { + compatible = "samsung,exynos4210-srom"; + reg = <0x12250000 0x14>; + }; - gic: interrupt-controller@10481000 { - compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x10481000 0x1000>, - <0x10482000 0x1000>, - <0x10484000 0x2000>, - <0x10486000 0x2000>; - interrupts = <1 9 0xf04>; - }; + combiner: interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + #interrupt-cells = <2>; + interrupt-controller; + samsung,combiner-nr = <32>; + reg = <0x10440000 0x1000>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, + <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, + <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + }; - serial_0: serial@12C00000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C00000 0x100>; - interrupts = <0 51 0>; - }; + gic: interrupt-controller@10481000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10481000 0x1000>, + <0x10482000 0x1000>, + <0x10484000 0x2000>, + <0x10486000 0x2000>; + interrupts = <1 9 0xf04>; + }; - serial_1: serial@12C10000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C10000 0x100>; - interrupts = <0 52 0>; - }; + sysreg_system_controller: syscon@10050000 { + compatible = "samsung,exynos5-sysreg", "syscon"; + reg = <0x10050000 0x5000>; + }; - serial_2: serial@12C20000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C20000 0x100>; - interrupts = <0 53 0>; - }; + serial_0: serial@12C00000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C00000 0x100>; + interrupts = <0 51 0>; + }; - serial_3: serial@12C30000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C30000 0x100>; - interrupts = <0 54 0>; - }; + serial_1: serial@12C10000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C10000 0x100>; + interrupts = <0 52 0>; + }; - rtc: rtc@101E0000 { - compatible = "samsung,s3c6410-rtc"; - reg = <0x101E0000 0x100>; - interrupts = <0 43 0>, <0 44 0>; - status = "disabled"; - }; + serial_2: serial@12C20000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C20000 0x100>; + interrupts = <0 53 0>; + }; - fimd: fimd@14400000 { - compatible = "samsung,exynos5250-fimd"; - interrupt-parent = <&combiner>; - reg = <0x14400000 0x40000>; - interrupt-names = "fifo", "vsync", "lcd_sys"; - interrupts = <18 4>, <18 5>, <18 6>; - samsung,sysreg = <&sysreg_system_controller>; - status = "disabled"; - }; + serial_3: serial@12C30000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C30000 0x100>; + interrupts = <0 54 0>; + }; - dp: dp-controller@145B0000 { - compatible = "samsung,exynos5-dp"; - reg = <0x145B0000 0x1000>; - interrupts = <10 3>; - interrupt-parent = <&combiner>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; + i2c_0: i2c@12C60000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C60000 0x100>; + interrupts = <0 56 0>; + #address-cells = <1>; + #size-cells = <0>; + samsung,sysreg-phandle = <&sysreg_system_controller>; + status = "disabled"; + }; + + i2c_1: i2c@12C70000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C70000 0x100>; + interrupts = <0 57 0>; + #address-cells = <1>; + #size-cells = <0>; + samsung,sysreg-phandle = <&sysreg_system_controller>; + status = "disabled"; + }; + + i2c_2: i2c@12C80000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C80000 0x100>; + interrupts = <0 58 0>; + #address-cells = <1>; + #size-cells = <0>; + samsung,sysreg-phandle = <&sysreg_system_controller>; + status = "disabled"; + }; + + i2c_3: i2c@12C90000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C90000 0x100>; + interrupts = <0 59 0>; + #address-cells = <1>; + #size-cells = <0>; + samsung,sysreg-phandle = <&sysreg_system_controller>; + status = "disabled"; + }; + + pwm: pwm@12DD0000 { + compatible = "samsung,exynos4210-pwm"; + reg = <0x12DD0000 0x100>; + samsung,pwm-outputs = <0>, <1>, <2>, <3>; + #pwm-cells = <3>; + }; + + rtc: rtc@101E0000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0x101E0000 0x100>; + interrupts = <0 43 0>, <0 44 0>; + status = "disabled"; + }; + + fimd: fimd@14400000 { + compatible = "samsung,exynos5250-fimd"; + interrupt-parent = <&combiner>; + reg = <0x14400000 0x40000>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <18 4>, <18 5>, <18 6>; + samsung,sysreg = <&sysreg_system_controller>; + status = "disabled"; + }; + + dp: dp-controller@145B0000 { + compatible = "samsung,exynos5-dp"; + reg = <0x145B0000 0x1000>; + interrupts = <10 3>; + interrupt-parent = <&combiner>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 39940f4bd556..ea70603f660d 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -516,10 +516,6 @@ status = "okay"; }; -&mfc { - memory-region = <&mfc_left>, <&mfc_right>; -}; - &mmc_0 { status = "okay"; num-slots = <1>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 9fac874af5eb..381af134c4c8 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -344,10 +344,6 @@ status = "okay"; }; -&mfc { - memory-region = <&mfc_left>, <&mfc_right>; -}; - &mmc_0 { status = "okay"; num-slots = <1>; diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index fa14f77df563..fadbea744e1a 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -61,7 +61,7 @@ #address-cells = <1>; #size-cells = <0>; - i2c-parent = <&{/i2c@12CA0000}>; + i2c-parent = <&i2c_4>; our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>; their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index 784130bdb6a3..44f4292bfef6 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -425,10 +425,6 @@ status = "okay"; }; -&mfc { - memory-region = <&mfc_left>, <&mfc_right>; -}; - &mmc_0 { status = "okay"; num-slots = <1>; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index c7158b2fb213..f7357d99b47c 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -37,10 +37,6 @@ mshc1 = &mmc_1; mshc2 = &mmc_2; mshc3 = &mmc_3; - i2c0 = &i2c_0; - i2c1 = &i2c_1; - i2c2 = &i2c_2; - i2c3 = &i2c_3; i2c4 = &i2c_4; i2c5 = &i2c_5; i2c6 = &i2c_6; @@ -96,962 +92,896 @@ }; }; - sysram@02020000 { - compatible = "mmio-sram"; - reg = <0x02020000 0x30000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x02020000 0x30000>; + soc: soc { + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x30000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x30000>; - smp-sysram@0 { - compatible = "samsung,exynos4210-sysram"; - reg = <0x0 0x1000>; - }; + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; - smp-sysram@2f000 { - compatible = "samsung,exynos4210-sysram-ns"; - reg = <0x2f000 0x1000>; + smp-sysram@2f000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x2f000 0x1000>; + }; }; - }; - pd_gsc: gsc-power-domain@10044000 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10044000 0x20>; - #power-domain-cells = <0>; - }; + pd_gsc: gsc-power-domain@10044000 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044000 0x20>; + #power-domain-cells = <0>; + }; - pd_mfc: mfc-power-domain@10044040 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10044040 0x20>; - #power-domain-cells = <0>; - }; + pd_mfc: mfc-power-domain@10044040 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044040 0x20>; + #power-domain-cells = <0>; + }; - pd_disp1: disp1-power-domain@100440A0 { - compatible = "samsung,exynos4210-pd"; - reg = <0x100440A0 0x20>; - #power-domain-cells = <0>; - clocks = <&clock CLK_FIN_PLL>, - <&clock CLK_MOUT_ACLK200_DISP1_SUB>, - <&clock CLK_MOUT_ACLK300_DISP1_SUB>; - clock-names = "oscclk", "clk0", "clk1"; - }; + pd_disp1: disp1-power-domain@100440A0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x100440A0 0x20>; + #power-domain-cells = <0>; + clocks = <&clock CLK_FIN_PLL>, + <&clock CLK_MOUT_ACLK200_DISP1_SUB>, + <&clock CLK_MOUT_ACLK300_DISP1_SUB>; + clock-names = "oscclk", "clk0", "clk1"; + }; - clock: clock-controller@10010000 { - compatible = "samsung,exynos5250-clock"; - reg = <0x10010000 0x30000>; - #clock-cells = <1>; - }; + clock: clock-controller@10010000 { + compatible = "samsung,exynos5250-clock"; + reg = <0x10010000 0x30000>; + #clock-cells = <1>; + }; - clock_audss: audss-clock-controller@3810000 { - compatible = "samsung,exynos5250-audss-clock"; - reg = <0x03810000 0x0C>; - #clock-cells = <1>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>, - <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>; - clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; - }; + clock_audss: audss-clock-controller@3810000 { + compatible = "samsung,exynos5250-audss-clock"; + reg = <0x03810000 0x0C>; + #clock-cells = <1>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>, + <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>; + clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; + }; - timer { - compatible = "arm,armv7-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; - /* Unfortunately we need this since some versions of U-Boot - * on Exynos don't set the CNTFRQ register, so we need the - * value from DT. - */ - clock-frequency = <24000000>; - }; + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + /* + * Unfortunately we need this since some versions + * of U-Boot on Exynos don't set the CNTFRQ register, + * so we need the value from DT. + */ + clock-frequency = <24000000>; + }; - mct@101C0000 { - compatible = "samsung,exynos4210-mct"; - reg = <0x101C0000 0x800>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&mct_map>; - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, - <4 0>, <5 0>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; - clock-names = "fin_pll", "mct"; - - mct_map: mct-map { + mct@101C0000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x101C0000 0x800>; + interrupt-controller; #interrupt-cells = <2>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = <0x0 0 &combiner 23 3>, - <0x1 0 &combiner 23 4>, - <0x2 0 &combiner 25 2>, - <0x3 0 &combiner 25 3>, - <0x4 0 &gic 0 120 0>, - <0x5 0 &gic 0 121 0>; + interrupt-parent = <&mct_map>; + interrupts = <0 0>, <1 0>, <2 0>, <3 0>, + <4 0>, <5 0>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; + clock-names = "fin_pll", "mct"; + + mct_map: mct-map { + #interrupt-cells = <2>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0x0 0 &combiner 23 3>, + <0x1 0 &combiner 23 4>, + <0x2 0 &combiner 25 2>, + <0x3 0 &combiner 25 3>, + <0x4 0 &gic 0 120 0>, + <0x5 0 &gic 0 121 0>; + }; }; - }; - - pmu { - compatible = "arm,cortex-a15-pmu"; - interrupt-parent = <&combiner>; - interrupts = <1 2>, <22 4>; - }; - - pinctrl_0: pinctrl@11400000 { - compatible = "samsung,exynos5250-pinctrl"; - reg = <0x11400000 0x1000>; - interrupts = <0 46 0>; - wakup_eint: wakeup-interrupt-controller { - compatible = "samsung,exynos4210-wakeup-eint"; - interrupt-parent = <&gic>; - interrupts = <0 32 0>; + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupt-parent = <&combiner>; + interrupts = <1 2>, <22 4>; }; - }; - - pinctrl_1: pinctrl@13400000 { - compatible = "samsung,exynos5250-pinctrl"; - reg = <0x13400000 0x1000>; - interrupts = <0 45 0>; - }; - pinctrl_2: pinctrl@10d10000 { - compatible = "samsung,exynos5250-pinctrl"; - reg = <0x10d10000 0x1000>; - interrupts = <0 50 0>; - }; - - pinctrl_3: pinctrl@03860000 { - compatible = "samsung,exynos5250-pinctrl"; - reg = <0x03860000 0x1000>; - interrupts = <0 47 0>; - }; - - pmu_system_controller: system-controller@10040000 { - compatible = "samsung,exynos5250-pmu", "syscon"; - reg = <0x10040000 0x5000>; - clock-names = "clkout16"; - clocks = <&clock CLK_FIN_PLL>; - #clock-cells = <1>; - interrupt-controller; - #interrupt-cells = <3>; - interrupt-parent = <&gic>; - }; + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,exynos5250-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <0 46 0>; - sysreg_system_controller: syscon@10050000 { - compatible = "samsung,exynos5-sysreg", "syscon"; - reg = <0x10050000 0x5000>; - }; + wakup_eint: wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; + }; - watchdog@101D0000 { - compatible = "samsung,exynos5250-wdt"; - reg = <0x101D0000 0x100>; - interrupts = <0 42 0>; - clocks = <&clock CLK_WDT>; - clock-names = "watchdog"; - samsung,syscon-phandle = <&pmu_system_controller>; - }; + pinctrl_1: pinctrl@13400000 { + compatible = "samsung,exynos5250-pinctrl"; + reg = <0x13400000 0x1000>; + interrupts = <0 45 0>; + }; - g2d@10850000 { - compatible = "samsung,exynos5250-g2d"; - reg = <0x10850000 0x1000>; - interrupts = <0 91 0>; - clocks = <&clock CLK_G2D>; - clock-names = "fimg2d"; - iommus = <&sysmmu_g2d>; - }; + pinctrl_2: pinctrl@10d10000 { + compatible = "samsung,exynos5250-pinctrl"; + reg = <0x10d10000 0x1000>; + interrupts = <0 50 0>; + }; - mfc: codec@11000000 { - compatible = "samsung,mfc-v6"; - reg = <0x11000000 0x10000>; - interrupts = <0 96 0>; - power-domains = <&pd_mfc>; - clocks = <&clock CLK_MFC>; - clock-names = "mfc"; - iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; - iommu-names = "left", "right"; - }; + pinctrl_3: pinctrl@03860000 { + compatible = "samsung,exynos5250-pinctrl"; + reg = <0x03860000 0x1000>; + interrupts = <0 47 0>; + }; - rotator: rotator@11C00000 { - compatible = "samsung,exynos5250-rotator"; - reg = <0x11C00000 0x64>; - interrupts = <0 84 0>; - clocks = <&clock CLK_ROTATOR>; - clock-names = "rotator"; - iommus = <&sysmmu_rotator>; - }; + pmu_system_controller: system-controller@10040000 { + compatible = "samsung,exynos5250-pmu", "syscon"; + reg = <0x10040000 0x5000>; + clock-names = "clkout16"; + clocks = <&clock CLK_FIN_PLL>; + #clock-cells = <1>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + }; - tmu: tmu@10060000 { - compatible = "samsung,exynos5250-tmu"; - reg = <0x10060000 0x100>; - interrupts = <0 65 0>; - clocks = <&clock CLK_TMU>; - clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" - }; + watchdog@101D0000 { + compatible = "samsung,exynos5250-wdt"; + reg = <0x101D0000 0x100>; + interrupts = <0 42 0>; + clocks = <&clock CLK_WDT>; + clock-names = "watchdog"; + samsung,syscon-phandle = <&pmu_system_controller>; + }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tmu 0>; + g2d@10850000 { + compatible = "samsung,exynos5250-g2d"; + reg = <0x10850000 0x1000>; + interrupts = <0 91 0>; + clocks = <&clock CLK_G2D>; + clock-names = "fimg2d"; + iommus = <&sysmmu_g2d>; + }; - cooling-maps { - map0 { - /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 9 9>; - }; - map1 { - /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 15 15>; - }; - }; + mfc: codec@11000000 { + compatible = "samsung,mfc-v6"; + reg = <0x11000000 0x10000>; + interrupts = <0 96 0>; + power-domains = <&pd_mfc>; + clocks = <&clock CLK_MFC>; + clock-names = "mfc"; + iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; + iommu-names = "left", "right"; }; - }; - sata: sata@122F0000 { - compatible = "snps,dwc-ahci"; - samsung,sata-freq = <66>; - reg = <0x122F0000 0x1ff>; - interrupts = <0 115 0>; - clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>; - clock-names = "sata", "sclk_sata"; - phys = <&sata_phy>; - phy-names = "sata-phy"; - status = "disabled"; - }; + rotator: rotator@11C00000 { + compatible = "samsung,exynos5250-rotator"; + reg = <0x11C00000 0x64>; + interrupts = <0 84 0>; + clocks = <&clock CLK_ROTATOR>; + clock-names = "rotator"; + iommus = <&sysmmu_rotator>; + }; - sata_phy: sata-phy@12170000 { - compatible = "samsung,exynos5250-sata-phy"; - reg = <0x12170000 0x1ff>; - clocks = <&clock CLK_SATA_PHYCTRL>; - clock-names = "sata_phyctrl"; - #phy-cells = <0>; - samsung,syscon-phandle = <&pmu_system_controller>; - status = "disabled"; - }; + tmu: tmu@10060000 { + compatible = "samsung,exynos5250-tmu"; + reg = <0x10060000 0x100>; + interrupts = <0 65 0>; + clocks = <&clock CLK_TMU>; + clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; - i2c_0: i2c@12C60000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x12C60000 0x100>; - interrupts = <0 56 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C0>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_bus>; - samsung,sysreg-phandle = <&sysreg_system_controller>; - status = "disabled"; - }; + sata: sata@122F0000 { + compatible = "snps,dwc-ahci"; + samsung,sata-freq = <66>; + reg = <0x122F0000 0x1ff>; + interrupts = <0 115 0>; + clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>; + clock-names = "sata", "sclk_sata"; + phys = <&sata_phy>; + phy-names = "sata-phy"; + status = "disabled"; + }; - i2c_1: i2c@12C70000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x12C70000 0x100>; - interrupts = <0 57 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C1>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_bus>; - samsung,sysreg-phandle = <&sysreg_system_controller>; - status = "disabled"; - }; + sata_phy: sata-phy@12170000 { + compatible = "samsung,exynos5250-sata-phy"; + reg = <0x12170000 0x1ff>; + clocks = <&clock CLK_SATA_PHYCTRL>; + clock-names = "sata_phyctrl"; + #phy-cells = <0>; + samsung,syscon-phandle = <&pmu_system_controller>; + status = "disabled"; + }; - i2c_2: i2c@12C80000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x12C80000 0x100>; - interrupts = <0 58 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C2>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_bus>; - samsung,sysreg-phandle = <&sysreg_system_controller>; - status = "disabled"; - }; + /* i2c_0-3 are defined in exynos5.dtsi */ + i2c_4: i2c@12CA0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12CA0000 0x100>; + interrupts = <0 60 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_I2C4>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_bus>; + status = "disabled"; + }; - i2c_3: i2c@12C90000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x12C90000 0x100>; - interrupts = <0 59 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C3>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_bus>; - samsung,sysreg-phandle = <&sysreg_system_controller>; - status = "disabled"; - }; + i2c_5: i2c@12CB0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12CB0000 0x100>; + interrupts = <0 61 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_I2C5>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_bus>; + status = "disabled"; + }; - i2c_4: i2c@12CA0000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x12CA0000 0x100>; - interrupts = <0 60 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C4>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_bus>; - status = "disabled"; - }; + i2c_6: i2c@12CC0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12CC0000 0x100>; + interrupts = <0 62 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_I2C6>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_bus>; + status = "disabled"; + }; - i2c_5: i2c@12CB0000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x12CB0000 0x100>; - interrupts = <0 61 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C5>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_bus>; - status = "disabled"; - }; + i2c_7: i2c@12CD0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12CD0000 0x100>; + interrupts = <0 63 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_I2C7>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_bus>; + status = "disabled"; + }; - i2c_6: i2c@12CC0000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x12CC0000 0x100>; - interrupts = <0 62 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C6>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_bus>; - status = "disabled"; - }; + i2c_8: i2c@12CE0000 { + compatible = "samsung,s3c2440-hdmiphy-i2c"; + reg = <0x12CE0000 0x1000>; + interrupts = <0 64 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_I2C_HDMI>; + clock-names = "i2c"; + status = "disabled"; + }; - i2c_7: i2c@12CD0000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x12CD0000 0x100>; - interrupts = <0 63 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C7>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c7_bus>; - status = "disabled"; - }; + i2c_9: i2c@121D0000 { + compatible = "samsung,exynos5-sata-phy-i2c"; + reg = <0x121D0000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_SATA_PHYI2C>; + clock-names = "i2c"; + status = "disabled"; + }; - i2c_8: i2c@12CE0000 { - compatible = "samsung,s3c2440-hdmiphy-i2c"; - reg = <0x12CE0000 0x1000>; - interrupts = <0 64 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C_HDMI>; - clock-names = "i2c"; - status = "disabled"; - }; + spi_0: spi@12d20000 { + compatible = "samsung,exynos4210-spi"; + status = "disabled"; + reg = <0x12d20000 0x100>; + interrupts = <0 66 0>; + dmas = <&pdma0 5 + &pdma0 4>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>; + clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; + }; - i2c_9: i2c@121D0000 { - compatible = "samsung,exynos5-sata-phy-i2c"; - reg = <0x121D0000 0x100>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_SATA_PHYI2C>; - clock-names = "i2c"; - status = "disabled"; - }; + spi_1: spi@12d30000 { + compatible = "samsung,exynos4210-spi"; + status = "disabled"; + reg = <0x12d30000 0x100>; + interrupts = <0 67 0>; + dmas = <&pdma1 5 + &pdma1 4>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>; + clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + }; - spi_0: spi@12d20000 { - compatible = "samsung,exynos4210-spi"; - status = "disabled"; - reg = <0x12d20000 0x100>; - interrupts = <0 66 0>; - dmas = <&pdma0 5 - &pdma0 4>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>; - clock-names = "spi", "spi_busclk0"; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_bus>; - }; + spi_2: spi@12d40000 { + compatible = "samsung,exynos4210-spi"; + status = "disabled"; + reg = <0x12d40000 0x100>; + interrupts = <0 68 0>; + dmas = <&pdma0 7 + &pdma0 6>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>; + clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_bus>; + }; - spi_1: spi@12d30000 { - compatible = "samsung,exynos4210-spi"; - status = "disabled"; - reg = <0x12d30000 0x100>; - interrupts = <0 67 0>; - dmas = <&pdma1 5 - &pdma1 4>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>; - clock-names = "spi", "spi_busclk0"; - pinctrl-names = "default"; - pinctrl-0 = <&spi1_bus>; - }; + mmc_0: mmc@12200000 { + compatible = "samsung,exynos5250-dw-mshc"; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12200000 0x1000>; + clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; + }; - spi_2: spi@12d40000 { - compatible = "samsung,exynos4210-spi"; - status = "disabled"; - reg = <0x12d40000 0x100>; - interrupts = <0 68 0>; - dmas = <&pdma0 7 - &pdma0 6>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>; - clock-names = "spi", "spi_busclk0"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_bus>; - }; + mmc_1: mmc@12210000 { + compatible = "samsung,exynos5250-dw-mshc"; + interrupts = <0 76 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12210000 0x1000>; + clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; + }; - mmc_0: mmc@12200000 { - compatible = "samsung,exynos5250-dw-mshc"; - interrupts = <0 75 0>; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x12200000 0x1000>; - clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>; - clock-names = "biu", "ciu"; - fifo-depth = <0x80>; - status = "disabled"; - }; + mmc_2: mmc@12220000 { + compatible = "samsung,exynos5250-dw-mshc"; + interrupts = <0 77 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12220000 0x1000>; + clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; + }; - mmc_1: mmc@12210000 { - compatible = "samsung,exynos5250-dw-mshc"; - interrupts = <0 76 0>; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x12210000 0x1000>; - clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>; - clock-names = "biu", "ciu"; - fifo-depth = <0x80>; - status = "disabled"; - }; + mmc_3: mmc@12230000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12230000 0x1000>; + interrupts = <0 78 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; + }; - mmc_2: mmc@12220000 { - compatible = "samsung,exynos5250-dw-mshc"; - interrupts = <0 77 0>; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x12220000 0x1000>; - clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>; - clock-names = "biu", "ciu"; - fifo-depth = <0x80>; - status = "disabled"; - }; + i2s0: i2s@03830000 { + compatible = "samsung,s5pv210-i2s"; + status = "disabled"; + reg = <0x03830000 0x100>; + dmas = <&pdma0 10 + &pdma0 9 + &pdma0 8>; + dma-names = "tx", "rx", "tx-sec"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + samsung,idma-addr = <0x03000000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + }; - mmc_3: mmc@12230000 { - compatible = "samsung,exynos5250-dw-mshc"; - reg = <0x12230000 0x1000>; - interrupts = <0 78 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>; - clock-names = "biu", "ciu"; - fifo-depth = <0x80>; - status = "disabled"; - }; + i2s1: i2s@12D60000 { + compatible = "samsung,s3c6410-i2s"; + status = "disabled"; + reg = <0x12D60000 0x100>; + dmas = <&pdma1 12 + &pdma1 11>; + dma-names = "tx", "rx"; + clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>; + clock-names = "iis", "i2s_opclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1_bus>; + }; - i2s0: i2s@03830000 { - compatible = "samsung,s5pv210-i2s"; - status = "disabled"; - reg = <0x03830000 0x100>; - dmas = <&pdma0 10 - &pdma0 9 - &pdma0 8>; - dma-names = "tx", "rx", "tx-sec"; - clocks = <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_SCLK_I2S>; - clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; - samsung,idma-addr = <0x03000000>; - pinctrl-names = "default"; - pinctrl-0 = <&i2s0_bus>; - }; + i2s2: i2s@12D70000 { + compatible = "samsung,s3c6410-i2s"; + status = "disabled"; + reg = <0x12D70000 0x100>; + dmas = <&pdma0 12 + &pdma0 11>; + dma-names = "tx", "rx"; + clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>; + clock-names = "iis", "i2s_opclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s2_bus>; + }; - i2s1: i2s@12D60000 { - compatible = "samsung,s3c6410-i2s"; - status = "disabled"; - reg = <0x12D60000 0x100>; - dmas = <&pdma1 12 - &pdma1 11>; - dma-names = "tx", "rx"; - clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>; - clock-names = "iis", "i2s_opclk0"; - pinctrl-names = "default"; - pinctrl-0 = <&i2s1_bus>; - }; + usb_dwc3 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&clock CLK_USB3>; + clock-names = "usbdrd30"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbdrd_dwc3: dwc3@12000000 { + compatible = "synopsys,dwc3"; + reg = <0x12000000 0x10000>; + interrupts = <0 72 0>; + phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; - i2s2: i2s@12D70000 { - compatible = "samsung,s3c6410-i2s"; - status = "disabled"; - reg = <0x12D70000 0x100>; - dmas = <&pdma0 12 - &pdma0 11>; - dma-names = "tx", "rx"; - clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>; - clock-names = "iis", "i2s_opclk0"; - pinctrl-names = "default"; - pinctrl-0 = <&i2s2_bus>; - }; + usbdrd_phy: phy@12100000 { + compatible = "samsung,exynos5250-usbdrd-phy"; + reg = <0x12100000 0x100>; + clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>; + clock-names = "phy", "ref"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <1>; + }; - usb_dwc3 { - compatible = "samsung,exynos5250-dwusb3"; - clocks = <&clock CLK_USB3>; - clock-names = "usbdrd30"; - #address-cells = <1>; - #size-cells = <1>; - ranges; + ehci: usb@12110000 { + compatible = "samsung,exynos4210-ehci"; + reg = <0x12110000 0x100>; + interrupts = <0 71 0>; - usbdrd_dwc3: dwc3@12000000 { - compatible = "synopsys,dwc3"; - reg = <0x12000000 0x10000>; - interrupts = <0 72 0>; - phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>; - phy-names = "usb2-phy", "usb3-phy"; + clocks = <&clock CLK_USB2>; + clock-names = "usbhost"; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&usb2_phy_gen 1>; + }; }; - }; - - usbdrd_phy: phy@12100000 { - compatible = "samsung,exynos5250-usbdrd-phy"; - reg = <0x12100000 0x100>; - clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>; - clock-names = "phy", "ref"; - samsung,pmu-syscon = <&pmu_system_controller>; - #phy-cells = <1>; - }; - ehci: usb@12110000 { - compatible = "samsung,exynos4210-ehci"; - reg = <0x12110000 0x100>; - interrupts = <0 71 0>; + ohci: usb@12120000 { + compatible = "samsung,exynos4210-ohci"; + reg = <0x12120000 0x100>; + interrupts = <0 71 0>; - clocks = <&clock CLK_USB2>; - clock-names = "usbhost"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - phys = <&usb2_phy_gen 1>; + clocks = <&clock CLK_USB2>; + clock-names = "usbhost"; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&usb2_phy_gen 1>; + }; }; - }; - ohci: usb@12120000 { - compatible = "samsung,exynos4210-ohci"; - reg = <0x12120000 0x100>; - interrupts = <0 71 0>; - - clocks = <&clock CLK_USB2>; - clock-names = "usbhost"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - phys = <&usb2_phy_gen 1>; + usb2_phy_gen: phy@12130000 { + compatible = "samsung,exynos5250-usb2-phy"; + reg = <0x12130000 0x100>; + clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + samsung,sysreg-phandle = <&sysreg_system_controller>; + samsung,pmureg-phandle = <&pmu_system_controller>; }; - }; - usb2_phy_gen: phy@12130000 { - compatible = "samsung,exynos5250-usb2-phy"; - reg = <0x12130000 0x100>; - clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>; - clock-names = "phy", "ref"; - #phy-cells = <1>; - samsung,sysreg-phandle = <&sysreg_system_controller>; - samsung,pmureg-phandle = <&pmu_system_controller>; - }; + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + pdma0: pdma@121A0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121A0000 0x1000>; + interrupts = <0 34 0>; + clocks = <&clock CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@121B0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121B0000 0x1000>; + interrupts = <0 35 0>; + clocks = <&clock CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + mdma0: mdma@10800000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x10800000 0x1000>; + interrupts = <0 33 0>; + clocks = <&clock CLK_MDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + + mdma1: mdma@11C10000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x11C10000 0x1000>; + interrupts = <0 124 0>; + clocks = <&clock CLK_MDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + }; - pwm: pwm@12dd0000 { - compatible = "samsung,exynos4210-pwm"; - reg = <0x12dd0000 0x100>; - samsung,pwm-outputs = <0>, <1>, <2>, <3>; - #pwm-cells = <3>; - clocks = <&clock CLK_PWM>; - clock-names = "timers"; - }; + gsc_0: gsc@13e00000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e00000 0x1000>; + interrupts = <0 85 0>; + power-domains = <&pd_gsc>; + clocks = <&clock CLK_GSCL0>; + clock-names = "gscl"; + iommu = <&sysmmu_gsc0>; + }; - amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - - pdma0: pdma@121A0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121A0000 0x1000>; - interrupts = <0 34 0>; - clocks = <&clock CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@121B0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121B0000 0x1000>; - interrupts = <0 35 0>; - clocks = <&clock CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - mdma0: mdma@10800000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x10800000 0x1000>; - interrupts = <0 33 0>; - clocks = <&clock CLK_MDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - }; - - mdma1: mdma@11C10000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x11C10000 0x1000>; - interrupts = <0 124 0>; - clocks = <&clock CLK_MDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; + gsc_1: gsc@13e10000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e10000 0x1000>; + interrupts = <0 86 0>; + power-domains = <&pd_gsc>; + clocks = <&clock CLK_GSCL1>; + clock-names = "gscl"; + iommu = <&sysmmu_gsc1>; }; - }; - gsc_0: gsc@13e00000 { - compatible = "samsung,exynos5-gsc"; - reg = <0x13e00000 0x1000>; - interrupts = <0 85 0>; - power-domains = <&pd_gsc>; - clocks = <&clock CLK_GSCL0>; - clock-names = "gscl"; - iommu = <&sysmmu_gsc0>; - }; + gsc_2: gsc@13e20000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e20000 0x1000>; + interrupts = <0 87 0>; + power-domains = <&pd_gsc>; + clocks = <&clock CLK_GSCL2>; + clock-names = "gscl"; + iommu = <&sysmmu_gsc2>; + }; - gsc_1: gsc@13e10000 { - compatible = "samsung,exynos5-gsc"; - reg = <0x13e10000 0x1000>; - interrupts = <0 86 0>; - power-domains = <&pd_gsc>; - clocks = <&clock CLK_GSCL1>; - clock-names = "gscl"; - iommu = <&sysmmu_gsc1>; - }; + gsc_3: gsc@13e30000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e30000 0x1000>; + interrupts = <0 88 0>; + power-domains = <&pd_gsc>; + clocks = <&clock CLK_GSCL3>; + clock-names = "gscl"; + iommu = <&sysmmu_gsc3>; + }; - gsc_2: gsc@13e20000 { - compatible = "samsung,exynos5-gsc"; - reg = <0x13e20000 0x1000>; - interrupts = <0 87 0>; - power-domains = <&pd_gsc>; - clocks = <&clock CLK_GSCL2>; - clock-names = "gscl"; - iommu = <&sysmmu_gsc2>; - }; + hdmi: hdmi@14530000 { + compatible = "samsung,exynos4212-hdmi"; + reg = <0x14530000 0x70000>; + power-domains = <&pd_disp1>; + interrupts = <0 95 0>; + clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, + <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, + <&clock CLK_MOUT_HDMI>; + clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", + "sclk_hdmiphy", "mout_hdmi"; + samsung,syscon-phandle = <&pmu_system_controller>; + }; - gsc_3: gsc@13e30000 { - compatible = "samsung,exynos5-gsc"; - reg = <0x13e30000 0x1000>; - interrupts = <0 88 0>; - power-domains = <&pd_gsc>; - clocks = <&clock CLK_GSCL3>; - clock-names = "gscl"; - iommu = <&sysmmu_gsc3>; - }; + mixer@14450000 { + compatible = "samsung,exynos5250-mixer"; + reg = <0x14450000 0x10000>; + power-domains = <&pd_disp1>; + interrupts = <0 94 0>; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>; + clock-names = "mixer", "hdmi", "sclk_hdmi"; + iommus = <&sysmmu_tv>; + }; - hdmi: hdmi@14530000 { - compatible = "samsung,exynos4212-hdmi"; - reg = <0x14530000 0x70000>; - power-domains = <&pd_disp1>; - interrupts = <0 95 0>; - clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, - <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, - <&clock CLK_MOUT_HDMI>; - clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", - "sclk_hdmiphy", "mout_hdmi"; - samsung,syscon-phandle = <&pmu_system_controller>; - }; + dp_phy: video-phy { + compatible = "samsung,exynos5250-dp-video-phy"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <0>; + }; - mixer@14450000 { - compatible = "samsung,exynos5250-mixer"; - reg = <0x14450000 0x10000>; - power-domains = <&pd_disp1>; - interrupts = <0 94 0>; - clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, - <&clock CLK_SCLK_HDMI>; - clock-names = "mixer", "hdmi", "sclk_hdmi"; - iommus = <&sysmmu_tv>; - }; + adc: adc@12D10000 { + compatible = "samsung,exynos-adc-v1"; + reg = <0x12D10000 0x100>; + interrupts = <0 106 0>; + clocks = <&clock CLK_ADC>; + clock-names = "adc"; + #io-channel-cells = <1>; + io-channel-ranges; + samsung,syscon-phandle = <&pmu_system_controller>; + status = "disabled"; + }; - dp_phy: video-phy { - compatible = "samsung,exynos5250-dp-video-phy"; - samsung,pmu-syscon = <&pmu_system_controller>; - #phy-cells = <0>; - }; + sss@10830000 { + compatible = "samsung,exynos4210-secss"; + reg = <0x10830000 0x300>; + interrupts = <0 112 0>; + clocks = <&clock CLK_SSS>; + clock-names = "secss"; + }; - adc: adc@12D10000 { - compatible = "samsung,exynos-adc-v1"; - reg = <0x12D10000 0x100>; - interrupts = <0 106 0>; - clocks = <&clock CLK_ADC>; - clock-names = "adc"; - #io-channel-cells = <1>; - io-channel-ranges; - samsung,syscon-phandle = <&pmu_system_controller>; - status = "disabled"; - }; + sysmmu_g2d: sysmmu@10A60000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x10A60000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <24 5>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>; + #iommu-cells = <0>; + }; - sss@10830000 { - compatible = "samsung,exynos4210-secss"; - reg = <0x10830000 0x300>; - interrupts = <0 112 0>; - clocks = <&clock CLK_SSS>; - clock-names = "secss"; - }; + sysmmu_mfc_r: sysmmu@11200000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11200000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <6 2>; + power-domains = <&pd_mfc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>; + #iommu-cells = <0>; + }; - sysmmu_g2d: sysmmu@10A60000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x10A60000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <24 5>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>; - #iommu-cells = <0>; - }; + sysmmu_mfc_l: sysmmu@11210000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11210000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <8 5>; + power-domains = <&pd_mfc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>; + #iommu-cells = <0>; + }; - sysmmu_mfc_r: sysmmu@11200000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11200000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <6 2>; - power-domains = <&pd_mfc>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>; - #iommu-cells = <0>; - }; + sysmmu_rotator: sysmmu@11D40000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11D40000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>; + #iommu-cells = <0>; + }; - sysmmu_mfc_l: sysmmu@11210000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11210000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <8 5>; - power-domains = <&pd_mfc>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>; - #iommu-cells = <0>; - }; + sysmmu_jpeg: sysmmu@11F20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11F20000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 2>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>; + #iommu-cells = <0>; + }; - sysmmu_rotator: sysmmu@11D40000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11D40000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <4 0>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>; - #iommu-cells = <0>; - }; + sysmmu_fimc_isp: sysmmu@13260000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13260000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <10 6>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_ISP>; + #iommu-cells = <0>; + }; - sysmmu_jpeg: sysmmu@11F20000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11F20000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <4 2>; - power-domains = <&pd_gsc>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>; - #iommu-cells = <0>; - }; + sysmmu_fimc_drc: sysmmu@13270000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13270000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <11 6>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_DRC>; + #iommu-cells = <0>; + }; - sysmmu_fimc_isp: sysmmu@13260000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13260000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <10 6>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_FIMC_ISP>; - #iommu-cells = <0>; - }; + sysmmu_fimc_fd: sysmmu@132A0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x132A0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 0>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_FD>; + #iommu-cells = <0>; + }; - sysmmu_fimc_drc: sysmmu@13270000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13270000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <11 6>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_FIMC_DRC>; - #iommu-cells = <0>; - }; + sysmmu_fimc_scc: sysmmu@13280000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13280000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 2>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_SCC>; + #iommu-cells = <0>; + }; - sysmmu_fimc_fd: sysmmu@132A0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x132A0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <5 0>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_FIMC_FD>; - #iommu-cells = <0>; - }; + sysmmu_fimc_scp: sysmmu@13290000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13290000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <3 6>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_SCP>; + #iommu-cells = <0>; + }; - sysmmu_fimc_scc: sysmmu@13280000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13280000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <5 2>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_FIMC_SCC>; - #iommu-cells = <0>; - }; + sysmmu_fimc_mcuctl: sysmmu@132B0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x132B0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 4>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_MCU>; + #iommu-cells = <0>; + }; - sysmmu_fimc_scp: sysmmu@13290000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13290000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <3 6>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_FIMC_SCP>; - #iommu-cells = <0>; - }; + sysmmu_fimc_odc: sysmmu@132C0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x132C0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <11 0>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_ODC>; + #iommu-cells = <0>; + }; - sysmmu_fimc_mcuctl: sysmmu@132B0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x132B0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <5 4>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_FIMC_MCU>; - #iommu-cells = <0>; - }; + sysmmu_fimc_dis0: sysmmu@132D0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x132D0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <10 4>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_DIS0>; + #iommu-cells = <0>; + }; - sysmmu_fimc_odc: sysmmu@132C0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x132C0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <11 0>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_FIMC_ODC>; - #iommu-cells = <0>; - }; + sysmmu_fimc_dis1: sysmmu@132E0000{ + compatible = "samsung,exynos-sysmmu"; + reg = <0x132E0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <9 4>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_DIS1>; + #iommu-cells = <0>; + }; - sysmmu_fimc_dis0: sysmmu@132D0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x132D0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <10 4>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_FIMC_DIS0>; - #iommu-cells = <0>; - }; + sysmmu_fimc_3dnr: sysmmu@132F0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x132F0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 6>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_3DNR>; + #iommu-cells = <0>; + }; - sysmmu_fimc_dis1: sysmmu@132E0000{ - compatible = "samsung,exynos-sysmmu"; - reg = <0x132E0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <9 4>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_FIMC_DIS1>; - #iommu-cells = <0>; - }; + sysmmu_fimc_lite0: sysmmu@13C40000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13C40000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <3 4>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>; + #iommu-cells = <0>; + }; - sysmmu_fimc_3dnr: sysmmu@132F0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x132F0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <5 6>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_FIMC_3DNR>; - #iommu-cells = <0>; - }; + sysmmu_fimc_lite1: sysmmu@13C50000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13C50000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <24 1>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>; + #iommu-cells = <0>; + }; - sysmmu_fimc_lite0: sysmmu@13C40000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13C40000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <3 4>; - power-domains = <&pd_gsc>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>; - #iommu-cells = <0>; - }; + sysmmu_gsc0: sysmmu@13E80000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13E80000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <2 0>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>; + #iommu-cells = <0>; + }; - sysmmu_fimc_lite1: sysmmu@13C50000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13C50000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <24 1>; - power-domains = <&pd_gsc>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>; - #iommu-cells = <0>; - }; + sysmmu_gsc1: sysmmu@13E90000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13E90000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <2 2>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>; + #iommu-cells = <0>; + }; - sysmmu_gsc0: sysmmu@13E80000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13E80000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <2 0>; - power-domains = <&pd_gsc>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>; - #iommu-cells = <0>; - }; + sysmmu_gsc2: sysmmu@13EA0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13EA0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <2 4>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>; + #iommu-cells = <0>; + }; - sysmmu_gsc1: sysmmu@13E90000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13E90000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <2 2>; - power-domains = <&pd_gsc>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>; - #iommu-cells = <0>; - }; + sysmmu_gsc3: sysmmu@13EB0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13EB0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <2 6>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>; + #iommu-cells = <0>; + }; - sysmmu_gsc2: sysmmu@13EA0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13EA0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <2 4>; - power-domains = <&pd_gsc>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>; - #iommu-cells = <0>; - }; + sysmmu_fimd1: sysmmu@14640000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14640000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <3 2>; + power-domains = <&pd_disp1>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>; + #iommu-cells = <0>; + }; - sysmmu_gsc3: sysmmu@13EB0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13EB0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <2 6>; - power-domains = <&pd_gsc>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>; - #iommu-cells = <0>; + sysmmu_tv: sysmmu@14650000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14650000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <7 4>; + power-domains = <&pd_disp1>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>; + #iommu-cells = <0>; + }; }; - sysmmu_fimd1: sysmmu@14640000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x14640000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <3 2>; - power-domains = <&pd_disp1>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>; - #iommu-cells = <0>; - }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tmu 0>; - sysmmu_tv: sysmmu@14650000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x14650000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <7 4>; - power-domains = <&pd_disp1>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>; - #iommu-cells = <0>; + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 9 9>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 15 15>; + }; + }; + }; }; }; @@ -1070,6 +1000,39 @@ iommus = <&sysmmu_fimd1>; }; +&i2c_0 { + clocks = <&clock CLK_I2C0>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; +}; + +&i2c_1 { + clocks = <&clock CLK_I2C1>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; +}; + +&i2c_2 { + clocks = <&clock CLK_I2C2>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; +}; + +&i2c_3 { + clocks = <&clock CLK_I2C3>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_bus>; +}; + +&pwm { + clocks = <&clock CLK_PWM>; + clock-names = "timers"; +}; + &rtc { clocks = <&clock CLK_RTC>; clock-names = "rtc"; diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts new file mode 100644 index 000000000000..d9499310a301 --- /dev/null +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -0,0 +1,580 @@ +/* + * Hardkernel Odroid XU board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2016 Krzysztof Kozlowski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include "exynos5410.dtsi" +#include <dt-bindings/clock/maxim,max77802.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "exynos54xx-odroidxu-leds.dtsi" + +/ { + model = "Hardkernel Odroid XU"; + compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5"; + + memory { + reg = <0x40000000 0x7ea00000>; + }; + + chosen { + linux,stdout-path = &serial_2; + }; + + emmc_pwrseq: pwrseq { + pinctrl-0 = <&emmc_nrst_pin>; + pinctrl-names = "default"; + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>; + }; + + fan0: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm 0 20972 0>; + cooling-min-state = <0>; + cooling-max-state = <3>; + #cooling-cells = <2>; + cooling-levels = <0 130 170 230>; + }; + + fin_pll: xxti { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; + + firmware@02073000 { + compatible = "samsung,secure-firmware"; + reg = <0x02073000 0x1000>; + }; +}; + +&cpu0_thermal { + thermal-sensors = <&tmu_cpu0 0>; + polling-delay-passive = <0>; + polling-delay = <0>; + + trips { + cpu_alert0: cpu-alert-0 { + temperature = <50000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "active"; + }; + cpu_alert1: cpu-alert-1 { + temperature = <60000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "active"; + }; + cpu_alert2: cpu-alert-2 { + temperature = <70000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "active"; + }; + cpu_crit0: cpu-crit-0 { + temperature = <120000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&fan0 0 1>; + }; + map1 { + trip = <&cpu_alert1>; + cooling-device = <&fan0 1 2>; + }; + map2 { + trip = <&cpu_alert2>; + cooling-device = <&fan0 2 3>; + }; + }; +}; + +&hsi2c_4 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <400000>; + status = "okay"; + + usb3503: usb-hub@08 { + compatible = "smsc,usb3503"; + reg = <0x08>; + + intn-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>; + connect-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpx1 4 GPIO_ACTIVE_HIGH>; + initial-mode = <1>; + + clock-names = "refclk"; + clocks = <&pmu_system_controller 0>; + refclk-frequency = <24000000>; + }; + + max77802: pmic@09 { + compatible = "maxim,max77802"; + reg = <0x9>; + interrupt-parent = <&gpx0>; + interrupts = <4 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>, + <&pmic_dvs_3>; + #clock-cells = <1>; + + inl1-supply = <&buck5_reg>; + inl2-supply = <&buck7_reg>; + inl3-supply = <&buck9_reg>; + inl4-supply = <&buck9_reg>; + inl5-supply = <&buck9_reg>; + inl6-supply = <&buck10_reg>; + inl7-supply = <&buck9_reg>; + /* inl9 supply is BOOST, not configured here */ + inl10-supply = <&buck7_reg>; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_mem"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd_kfc"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "buck7"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck8_reg: BUCK8 { + /* vdd_mmc0 */ + regulator-name = "vddf_2v85"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-boot-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "buck9"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "buck10"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "vdd_alive"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "vddq_m1_m2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "vddq_gpio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "vddq_mmc2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + /* Having it off prevents reboot */ + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "vdd18_hsic"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd18_bpll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "vddq_lcd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "vdd10_hdmi"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "ldo9"; + }; + + ldo10_reg: LDO10 { + regulator-name = "vdd18_mipi"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "vddq_mmc01"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* + * Having it off prevents accessing MMC after + * reboot with error: + * MMC Device 1: Clock OFF has been failed. + */ + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "vdd33_usb3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "vddq_abbg0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "vddq_abbg1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "vdd10_usb3"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "ldo16"; + }; + + ldo17_reg: LDO17 { + regulator-name = "cam_sensor_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo18_reg: LDO18 { + regulator-name = "ldo18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "ldo19"; + }; + + ldo20_reg: LDO20 { + regulator-name = "vdd_mmc0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo21_reg: LDO21 { + /* vdd_mmc2 */ + regulator-name = "vddf_2v8"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + ldo22_reg: LDO22 { + regulator-name = "ldo22"; + }; + + ldo23_reg: LDO23 { + regulator-name = "dp_p3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo24_reg: LDO24 { + regulator-name = "cam_af"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo25_reg: LDO25 { + regulator-name = "eth_p3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo26_reg: LDO26 { + regulator-name = "usb30_extclk"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo27_reg: LDO27 { + regulator-name = "ldo27"; + }; + + ldo28_reg: LDO28 { + regulator-name = "ldo28"; + }; + + ldo29_reg: LDO29 { + regulator-name = "ldo29"; + }; + + ldo30_reg: LDO30 { + regulator-name = "vddq_e1_e2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo31_reg: LDO31 { + regulator-name = "ldo31"; + }; + + /* On revisions with ti,ina231 this is sensor VS */ + ldo32_reg: LDO32 { + regulator-name = "vs_power_meter"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo33_reg: LDO33 { + regulator-name = "ldo33"; + }; + + ldo34_reg: LDO34 { + regulator-name = "ldo34"; + }; + + ldo35_reg: LDO35 { + regulator-name = "ldo35"; + }; + }; + }; +}; + +&mmc_0 { + status = "okay"; + mmc-pwrseq = <&emmc_pwrseq>; + cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + samsung,dw-mshc-hs400-timing = <0 2>; + samsung,read-strobe-delay = <90>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>; + bus-width = <8>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + vmmc-supply = <&ldo20_reg>; + vqmmc-supply = <&ldo11_reg>; +}; + +&mmc_2 { + status = "okay"; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + bus-width = <4>; + cap-sd-highspeed; + vmmc-supply = <&ldo21_reg>; + vqmmc-supply = <&ldo4_reg>; +}; + +&pinctrl_0 { + emmc_nrst_pin: emmc-nrst { + samsung,pins = "gpd1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pmic_dvs_3: pmic-dvs-3 { + samsung,pins = "gpx0-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pmic_dvs_2: pmic-dvs-2 { + samsung,pins = "gpx0-1"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pmic_dvs_1: pmic-dvs-1 { + samsung,pins = "gpx0-2"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + samsung,pin-val = <1>; + }; + + max77802_irq: max77802-irq { + samsung,pins = "gpx0-4"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pwm { + /* + * PWM 0 -- fan + * PWM 1 -- Green LED + * PWM 2 -- Blue LED + * PWM 3 -- on MIPI connector for backlight + */ + pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; + pinctrl-names = "default"; + status = "okay"; +}; + +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>; + clock-names = "rtc", "rtc_src"; +}; + +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; + +&tmu_cpu0 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu1 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu2 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu3 { + vtmu-supply = <&ldo10_reg>; +}; + +&usbdrd_dwc3_0 { + dr_mode = "host"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "peripheral"; +}; + +&usbdrd3_0 { + vdd33-supply = <&ldo12_reg>; + vdd10-supply = <&ldo15_reg>; +}; + +&usbdrd3_1 { + vdd33-supply = <&ldo12_reg>; + vdd10-supply = <&ldo15_reg>; +}; diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi index f9aa6bb55464..b58a0f29f42c 100644 --- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi @@ -277,6 +277,216 @@ interrupt-controller; #interrupt-cells = <2>; }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa0-4", "gpa0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_fctl: uart2-fctl { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c3_bus: i2c3-bus { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart3_data: uart3-data { + samsung,pins = "gpa1-4", "gpa1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c4_hs_bus: i2c4-hs-bus { + samsung,pins = "gpa2-0", "gpa2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c5_hs_bus: i2c5-hs-bus { + samsung,pins = "gpa2-2", "gpa2-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c6_hs_bus: i2c6-hs-bus { + samsung,pins = "gpb1-3", "gpb1-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpb2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpb2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpb2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpb2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c7_hs_bus: i2c7-hs-bus { + samsung,pins = "gpb2-2", "gpb2-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpb3-0", "gpb3-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpb3-2", "gpb3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpc0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpc0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpc0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpc0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpc2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpc2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpc2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpc2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; }; &pinctrl_1 { diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts index 0f6429e1b75c..777fcf2edd79 100644 --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -102,14 +102,14 @@ }; }; -&uart0 { +&serial_0 { status = "okay"; }; -&uart1 { +&serial_1 { status = "okay"; }; -&uart2 { +&serial_2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 7a56aec2c5ba..137f48464f8b 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -13,9 +13,10 @@ * published by the Free Software Foundation. */ -#include "skeleton.dtsi" +#include "exynos54xx.dtsi" #include "exynos-syscon-restart.dtsi" #include <dt-bindings/clock/exynos5410.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> / { compatible = "samsung,exynos5410", "samsung,exynos5"; @@ -26,37 +27,34 @@ pinctrl1 = &pinctrl_1; pinctrl2 = &pinctrl_2; pinctrl3 = &pinctrl_3; - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; }; cpus { #address-cells = <1>; #size-cells = <0>; - CPU0: cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x0>; clock-frequency = <1600000000>; }; - CPU1: cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x1>; clock-frequency = <1600000000>; }; - CPU2: cpu@2 { + cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x2>; clock-frequency = <1600000000>; }; - CPU3: cpu@3 { + cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x3>; @@ -70,105 +68,54 @@ #size-cells = <1>; ranges; - combiner: interrupt-controller@10440000 { - compatible = "samsung,exynos4210-combiner"; - #interrupt-cells = <2>; - interrupt-controller; - samsung,combiner-nr = <32>; - reg = <0x10440000 0x1000>; - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, - <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, - <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; - }; - - gic: interrupt-controller@10481000 { - compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x10481000 0x1000>, - <0x10482000 0x1000>, - <0x10484000 0x2000>, - <0x10486000 0x2000>; - interrupts = <1 9 0xf04>; - }; - - chipid@10000000 { - compatible = "samsung,exynos4210-chipid"; - reg = <0x10000000 0x100>; - }; - - sromc: memory-controller@12250000 { - compatible = "samsung,exynos4210-srom"; - reg = <0x12250000 0x14>; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x04000000 0x20000 - 1 0 0x05000000 0x20000 - 2 0 0x06000000 0x20000 - 3 0 0x07000000 0x20000>; - }; - pmu_system_controller: system-controller@10040000 { compatible = "samsung,exynos5410-pmu", "syscon"; reg = <0x10040000 0x5000>; + clock-names = "clkout16"; + clocks = <&fin_pll>; + #clock-cells = <1>; }; - mct: mct@101C0000 { - compatible = "samsung,exynos4210-mct"; - reg = <0x101C0000 0xB00>; - interrupt-parent = <&interrupt_map>; - interrupts = <0>, <1>, <2>, <3>, - <4>, <5>, <6>, <7>, - <8>, <9>, <10>, <11>; - clocks = <&fin_pll>, <&clock CLK_MCT>; - clock-names = "fin_pll", "mct"; - - interrupt_map: interrupt-map { - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = <0 &combiner 23 3>, - <1 &combiner 23 4>, - <2 &combiner 25 2>, - <3 &combiner 25 3>, - <4 &gic 0 120 0>, - <5 &gic 0 121 0>, - <6 &gic 0 122 0>, - <7 &gic 0 123 0>, - <8 &gic 0 128 0>, - <9 &gic 0 129 0>, - <10 &gic 0 130 0>, - <11 &gic 0 131 0>; - }; + clock: clock-controller@10010000 { + compatible = "samsung,exynos5410-clock"; + reg = <0x10010000 0x30000>; + #clock-cells = <1>; }; - sysram@02020000 { - compatible = "mmio-sram"; - reg = <0x02020000 0x54000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x02020000 0x54000>; + tmu_cpu0: tmu@10060000 { + compatible = "samsung,exynos5420-tmu"; + reg = <0x10060000 0x100>; + interrupts = <GIC_SPI 65 0>; + clocks = <&clock CLK_TMU>; + clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; - smp-sysram@0 { - compatible = "samsung,exynos4210-sysram"; - reg = <0x0 0x1000>; - }; + tmu_cpu1: tmu@10064000 { + compatible = "samsung,exynos5420-tmu"; + reg = <0x10064000 0x100>; + interrupts = <GIC_SPI 183 0>; + clocks = <&clock CLK_TMU>; + clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; - smp-sysram@53000 { - compatible = "samsung,exynos4210-sysram-ns"; - reg = <0x53000 0x1000>; - }; + tmu_cpu2: tmu@10068000 { + compatible = "samsung,exynos5420-tmu"; + reg = <0x10068000 0x100>; + interrupts = <GIC_SPI 184 0>; + clocks = <&clock CLK_TMU>; + clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; - clock: clock-controller@10010000 { - compatible = "samsung,exynos5410-clock"; - reg = <0x10010000 0x30000>; - #clock-cells = <1>; + tmu_cpu3: tmu@1006c000 { + compatible = "samsung,exynos5420-tmu"; + reg = <0x1006c000 0x100>; + interrupts = <GIC_SPI 185 0>; + clocks = <&clock CLK_TMU>; + clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; mmc_0: mmc@12200000 { @@ -236,34 +183,182 @@ reg = <0x03860000 0x1000>; interrupts = <0 47 0>; }; + }; - uart0: serial@12C00000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C00000 0x100>; - interrupts = <0 51 0>; - clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; - clock-names = "uart", "clk_uart_baud0"; - status = "disabled"; + thermal-zones { + cpu0_thermal: cpu0-thermal { + thermal-sensors = <&tmu_cpu0>; + #include "exynos5420-trip-points.dtsi" }; - - uart1: serial@12C10000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C10000 0x100>; - interrupts = <0 52 0>; - clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; - clock-names = "uart", "clk_uart_baud0"; - status = "disabled"; + cpu1_thermal: cpu1-thermal { + thermal-sensors = <&tmu_cpu1>; + #include "exynos5420-trip-points.dtsi" }; - - uart2: serial@12C20000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C20000 0x100>; - interrupts = <0 53 0>; - clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; - clock-names = "uart", "clk_uart_baud0"; - status = "disabled"; + cpu2_thermal: cpu2-thermal { + thermal-sensors = <&tmu_cpu2>; + #include "exynos5420-trip-points.dtsi" + }; + cpu3_thermal: cpu3-thermal { + thermal-sensors = <&tmu_cpu3>; + #include "exynos5420-trip-points.dtsi" }; }; }; +&i2c_0 { + clocks = <&clock CLK_I2C0>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; +}; + +&i2c_1 { + clocks = <&clock CLK_I2C1>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; +}; + +&i2c_2 { + clocks = <&clock CLK_I2C2>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; +}; + +&i2c_3 { + clocks = <&clock CLK_I2C3>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_bus>; +}; + +&hsi2c_4 { + clocks = <&clock CLK_USI0>; + clock-names = "hsi2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_hs_bus>; +}; + +&hsi2c_5 { + clocks = <&clock CLK_USI1>; + clock-names = "hsi2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_hs_bus>; +}; + +&hsi2c_6 { + clocks = <&clock CLK_USI2>; + clock-names = "hsi2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_hs_bus>; +}; + +&hsi2c_7 { + clocks = <&clock CLK_USI3>; + clock-names = "hsi2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_hs_bus>; +}; + +&mct { + clocks = <&fin_pll>, <&clock CLK_MCT>; + clock-names = "fin_pll", "mct"; +}; + +&pwm { + clocks = <&clock CLK_PWM>; + clock-names = "timers"; +}; + +&rtc { + clocks = <&clock CLK_RTC>; + clock-names = "rtc"; + interrupt-parent = <&pmu_system_controller>; + status = "disabled"; +}; + +&serial_0 { + clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; +}; + +&serial_1 { + clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; +}; + +&serial_2 { + clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; +}; + +&serial_3 { + clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; + clock-names = "uart", "clk_uart_baud0"; +}; + +&sss { + clocks = <&clock CLK_SSS>; + clock-names = "secss"; +}; + +&sromc { + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x04000000 0x20000 + 1 0 0x05000000 0x20000 + 2 0 0x06000000 0x20000 + 3 0 0x07000000 0x20000>; +}; + +&usbdrd3_0 { + clocks = <&clock CLK_USBD300>; + clock-names = "usbdrd30"; +}; + +&usbdrd_phy0 { + clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>; + clock-names = "phy", "ref"; + samsung,pmu-syscon = <&pmu_system_controller>; +}; + +&usbdrd3_1 { + clocks = <&clock CLK_USBD301>; + clock-names = "usbdrd30"; +}; + +&usbdrd_dwc3_1 { + interrupts = <GIC_SPI 200 0>; +}; + +&usbdrd_phy1 { + clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>; + clock-names = "phy", "ref"; + samsung,pmu-syscon = <&pmu_system_controller>; +}; + +&usbhost1 { + clocks = <&clock CLK_USBH20>; + clock-names = "usbhost"; +}; + +&usbhost2 { + clocks = <&clock CLK_USBH20>; + clock-names = "usbhost"; +}; + +&usb2_phy { + clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>; + clock-names = "phy", "ref"; + samsung,sysreg-phandle = <&sysreg_system_controller>; + samsung,pmureg-phandle = <&pmu_system_controller>; +}; + +&watchdog { + clocks = <&clock CLK_WDT>; + clock-names = "watchdog"; + samsung,syscon-phandle = <&pmu_system_controller>; +}; + #include "exynos5410-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index b8b5f3ae2942..39a3b81478fd 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -347,10 +347,6 @@ }; }; -&mfc { - memory-region = <&mfc_left>, <&mfc_right>; -}; - &mmc_0 { status = "okay"; broken-cd; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 6b6766e3d90a..fe4e0915c0c6 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -279,7 +279,6 @@ regulator-name = "vdd_1v2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; @@ -302,7 +301,6 @@ regulator-name = "vdd_1v35"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; - regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; @@ -324,7 +322,6 @@ regulator-name = "vdd_2v"; regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; - regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; @@ -335,7 +332,6 @@ regulator-name = "vdd_1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; @@ -420,7 +416,6 @@ regulator-name = "vdd_ldo9"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-always-on; regulator-state-mem { regulator-on-in-suspend; regulator-mode = <MAX77802_OPMODE_LP>; @@ -431,7 +426,6 @@ regulator-name = "vdd_ldo10"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; @@ -702,10 +696,6 @@ status = "okay"; }; -&mfc { - memory-region = <&mfc_left>, <&mfc_right>; -}; - &mmc_0 { status = "okay"; num-slots = <1>; @@ -1053,6 +1043,26 @@ status = "okay"; }; +&tmu_cpu0 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu1 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu2 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu3 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_gpu { + vtmu-supply = <&ldo10_reg>; +}; + &usbdrd_dwc3_0 { dr_mode = "host"; }; diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi index 130563b2ca95..14beb7e07323 100644 --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi @@ -193,17 +193,17 @@ samsung,pin-drv = <3>; }; - sd1_clk: sd1-clk { - samsung,pins = "gpc1-0"; + sd0_rclk: sd0-rclk { + samsung,pins = "gpc0-7"; samsung,pin-function = <2>; - samsung,pin-pud = <0>; + samsung,pin-pud = <1>; samsung,pin-drv = <3>; }; - sd0_rclk: sd0-rclk { - samsung,pins = "gpc0-7"; + sd1_clk: sd1-clk { + samsung,pins = "gpc1-0"; samsung,pin-function = <2>; - samsung,pin-pud = <1>; + samsung,pin-pud = <0>; samsung,pin-drv = <3>; }; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 5206f41e548d..ed8f3426911b 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -355,10 +355,6 @@ }; }; -&mfc { - memory-region = <&mfc_left>, <&mfc_right>; -}; - &mmc_0 { status = "okay"; broken-cd; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index c6e05eb88937..00c4cfa54839 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -13,10 +13,10 @@ * published by the Free Software Foundation. */ +#include "exynos54xx.dtsi" #include <dt-bindings/clock/exynos5420.h> -#include "exynos5.dtsi" - #include <dt-bindings/clock/exynos-audss-clk.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> / { compatible = "samsung,exynos5420", "samsung,exynos5"; @@ -30,14 +30,6 @@ pinctrl2 = &pinctrl_2; pinctrl3 = &pinctrl_3; pinctrl4 = &pinctrl_4; - i2c0 = &i2c_0; - i2c1 = &i2c_1; - i2c2 = &i2c_2; - i2c3 = &i2c_3; - i2c4 = &hsi2c_4; - i2c5 = &hsi2c_5; - i2c6 = &hsi2c_6; - i2c7 = &hsi2c_7; i2c8 = &hsi2c_8; i2c9 = &hsi2c_9; i2c10 = &hsi2c_10; @@ -46,118 +38,6 @@ spi0 = &spi_0; spi1 = &spi_1; spi2 = &spi_2; - usbdrdphy0 = &usbdrd_phy0; - usbdrdphy1 = &usbdrd_phy1; - }; - - cluster_a15_opp_table: opp_table0 { - compatible = "operating-points-v2"; - opp-shared; - opp@1800000000 { - opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <1250000>; - clock-latency-ns = <140000>; - }; - opp@1700000000 { - opp-hz = /bits/ 64 <1700000000>; - opp-microvolt = <1212500>; - clock-latency-ns = <140000>; - }; - opp@1600000000 { - opp-hz = /bits/ 64 <1600000000>; - opp-microvolt = <1175000>; - clock-latency-ns = <140000>; - }; - opp@1500000000 { - opp-hz = /bits/ 64 <1500000000>; - opp-microvolt = <1137500>; - clock-latency-ns = <140000>; - }; - opp@1400000000 { - opp-hz = /bits/ 64 <1400000000>; - opp-microvolt = <1112500>; - clock-latency-ns = <140000>; - }; - opp@1300000000 { - opp-hz = /bits/ 64 <1300000000>; - opp-microvolt = <1062500>; - clock-latency-ns = <140000>; - }; - opp@1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1037500>; - clock-latency-ns = <140000>; - }; - opp@1100000000 { - opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <1012500>; - clock-latency-ns = <140000>; - }; - opp@1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = < 987500>; - clock-latency-ns = <140000>; - }; - opp@900000000 { - opp-hz = /bits/ 64 <900000000>; - opp-microvolt = < 962500>; - clock-latency-ns = <140000>; - }; - opp@800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = < 937500>; - clock-latency-ns = <140000>; - }; - opp@700000000 { - opp-hz = /bits/ 64 <700000000>; - opp-microvolt = < 912500>; - clock-latency-ns = <140000>; - }; - }; - - cluster_a7_opp_table: opp_table1 { - compatible = "operating-points-v2"; - opp-shared; - opp@1300000000 { - opp-hz = /bits/ 64 <1300000000>; - opp-microvolt = <1275000>; - clock-latency-ns = <140000>; - }; - opp@1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1212500>; - clock-latency-ns = <140000>; - }; - opp@1100000000 { - opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <1162500>; - clock-latency-ns = <140000>; - }; - opp@1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <1112500>; - clock-latency-ns = <140000>; - }; - opp@900000000 { - opp-hz = /bits/ 64 <900000000>; - opp-microvolt = <1062500>; - clock-latency-ns = <140000>; - }; - opp@800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <1025000>; - clock-latency-ns = <140000>; - }; - opp@700000000 { - opp-hz = /bits/ 64 <700000000>; - opp-microvolt = <975000>; - clock-latency-ns = <140000>; - }; - opp@600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <937500>; - clock-latency-ns = <140000>; - }; }; /* @@ -165,1434 +45,1270 @@ * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi. */ - cci: cci@10d20000 { - compatible = "arm,cci-400"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x10d20000 0x1000>; - ranges = <0x0 0x10d20000 0x6000>; - - cci_control0: slave-if@4000 { - compatible = "arm,cci-400-ctrl-if"; - interface-type = "ace"; - reg = <0x4000 0x1000>; - }; - cci_control1: slave-if@5000 { - compatible = "arm,cci-400-ctrl-if"; - interface-type = "ace"; - reg = <0x5000 0x1000>; + soc: soc { + cluster_a15_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + opp@1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1250000>; + clock-latency-ns = <140000>; + }; + opp@1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <1212500>; + clock-latency-ns = <140000>; + }; + opp@1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <1175000>; + clock-latency-ns = <140000>; + }; + opp@1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1137500>; + clock-latency-ns = <140000>; + }; + opp@1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1112500>; + clock-latency-ns = <140000>; + }; + opp@1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1062500>; + clock-latency-ns = <140000>; + }; + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1037500>; + clock-latency-ns = <140000>; + }; + opp@1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1012500>; + clock-latency-ns = <140000>; + }; + opp@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = < 987500>; + clock-latency-ns = <140000>; + }; + opp@900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = < 962500>; + clock-latency-ns = <140000>; + }; + opp@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = < 937500>; + clock-latency-ns = <140000>; + }; + opp@700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = < 912500>; + clock-latency-ns = <140000>; + }; + }; + + cluster_a7_opp_table: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + opp@1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1275000>; + clock-latency-ns = <140000>; + }; + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1212500>; + clock-latency-ns = <140000>; + }; + opp@1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1162500>; + clock-latency-ns = <140000>; + }; + opp@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1112500>; + clock-latency-ns = <140000>; + }; + opp@900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1062500>; + clock-latency-ns = <140000>; + }; + opp@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1025000>; + clock-latency-ns = <140000>; + }; + opp@700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <975000>; + clock-latency-ns = <140000>; + }; + opp@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <937500>; + clock-latency-ns = <140000>; + }; + }; + + cci: cci@10d20000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x10d20000 0x1000>; + ranges = <0x0 0x10d20000 0x6000>; + + cci_control0: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + cci_control1: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + }; + + clock: clock-controller@10010000 { + compatible = "samsung,exynos5420-clock"; + reg = <0x10010000 0x30000>; + #clock-cells = <1>; + }; + + clock_audss: audss-clock-controller@3810000 { + compatible = "samsung,exynos5420-audss-clock"; + reg = <0x03810000 0x0C>; + #clock-cells = <1>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>, + <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>; + clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; + }; + + mfc: codec@11000000 { + compatible = "samsung,mfc-v7"; + reg = <0x11000000 0x10000>; + interrupts = <0 96 0>; + clocks = <&clock CLK_MFC>; + clock-names = "mfc"; + power-domains = <&mfc_pd>; + iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; + iommu-names = "left", "right"; + }; + + mmc_0: mmc@12200000 { + compatible = "samsung,exynos5420-dw-mshc-smu"; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12200000 0x2000>; + clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; }; - }; - - sysram@02020000 { - compatible = "mmio-sram"; - reg = <0x02020000 0x54000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x02020000 0x54000>; - smp-sysram@0 { - compatible = "samsung,exynos4210-sysram"; - reg = <0x0 0x1000>; + mmc_1: mmc@12210000 { + compatible = "samsung,exynos5420-dw-mshc-smu"; + interrupts = <0 76 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12210000 0x2000>; + clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; }; - smp-sysram@53000 { - compatible = "samsung,exynos4210-sysram-ns"; - reg = <0x53000 0x1000>; + mmc_2: mmc@12220000 { + compatible = "samsung,exynos5420-dw-mshc"; + interrupts = <0 77 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12220000 0x1000>; + clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; }; - }; - - clock: clock-controller@10010000 { - compatible = "samsung,exynos5420-clock"; - reg = <0x10010000 0x30000>; - #clock-cells = <1>; - }; - clock_audss: audss-clock-controller@3810000 { - compatible = "samsung,exynos5420-audss-clock"; - reg = <0x03810000 0x0C>; - #clock-cells = <1>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>, - <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>; - clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; - }; - - mfc: codec@11000000 { - compatible = "samsung,mfc-v7"; - reg = <0x11000000 0x10000>; - interrupts = <0 96 0>; - clocks = <&clock CLK_MFC>; - clock-names = "mfc"; - power-domains = <&mfc_pd>; - iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; - iommu-names = "left", "right"; - }; + nocp_mem0_0: nocp@10CA1000 { + compatible = "samsung,exynos5420-nocp"; + reg = <0x10CA1000 0x200>; + status = "disabled"; + }; - mmc_0: mmc@12200000 { - compatible = "samsung,exynos5420-dw-mshc-smu"; - interrupts = <0 75 0>; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x12200000 0x2000>; - clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>; - clock-names = "biu", "ciu"; - fifo-depth = <0x40>; - status = "disabled"; - }; + nocp_mem0_1: nocp@10CA1400 { + compatible = "samsung,exynos5420-nocp"; + reg = <0x10CA1400 0x200>; + status = "disabled"; + }; - mmc_1: mmc@12210000 { - compatible = "samsung,exynos5420-dw-mshc-smu"; - interrupts = <0 76 0>; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x12210000 0x2000>; - clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>; - clock-names = "biu", "ciu"; - fifo-depth = <0x40>; - status = "disabled"; - }; + nocp_mem1_0: nocp@10CA1800 { + compatible = "samsung,exynos5420-nocp"; + reg = <0x10CA1800 0x200>; + status = "disabled"; + }; - mmc_2: mmc@12220000 { - compatible = "samsung,exynos5420-dw-mshc"; - interrupts = <0 77 0>; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x12220000 0x1000>; - clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>; - clock-names = "biu", "ciu"; - fifo-depth = <0x40>; - status = "disabled"; - }; + nocp_mem1_1: nocp@10CA1C00 { + compatible = "samsung,exynos5420-nocp"; + reg = <0x10CA1C00 0x200>; + status = "disabled"; + }; - mct: mct@101C0000 { - compatible = "samsung,exynos4210-mct"; - reg = <0x101C0000 0x800>; - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&mct_map>; - interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, - <8>, <9>, <10>, <11>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; - clock-names = "fin_pll", "mct"; - - mct_map: mct-map { - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = <0 &combiner 23 3>, - <1 &combiner 23 4>, - <2 &combiner 25 2>, - <3 &combiner 25 3>, - <4 &gic 0 120 0>, - <5 &gic 0 121 0>, - <6 &gic 0 122 0>, - <7 &gic 0 123 0>, - <8 &gic 0 128 0>, - <9 &gic 0 129 0>, - <10 &gic 0 130 0>, - <11 &gic 0 131 0>; + nocp_g3d_0: nocp@11A51000 { + compatible = "samsung,exynos5420-nocp"; + reg = <0x11A51000 0x200>; + status = "disabled"; }; - }; - nocp_mem0_0: nocp@10CA1000 { - compatible = "samsung,exynos5420-nocp"; - reg = <0x10CA1000 0x200>; - status = "disabled"; - }; + nocp_g3d_1: nocp@11A51400 { + compatible = "samsung,exynos5420-nocp"; + reg = <0x11A51400 0x200>; + status = "disabled"; + }; - nocp_mem0_1: nocp@10CA1400 { - compatible = "samsung,exynos5420-nocp"; - reg = <0x10CA1400 0x200>; - status = "disabled"; - }; + gsc_pd: power-domain@10044000 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044000 0x20>; + #power-domain-cells = <0>; + clocks = <&clock CLK_FIN_PLL>, + <&clock CLK_MOUT_USER_ACLK300_GSCL>, + <&clock CLK_GSCL0>, <&clock CLK_GSCL1>; + clock-names = "oscclk", "clk0", "asb0", "asb1"; + }; - nocp_mem1_0: nocp@10CA1800 { - compatible = "samsung,exynos5420-nocp"; - reg = <0x10CA1800 0x200>; - status = "disabled"; - }; + isp_pd: power-domain@10044020 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044020 0x20>; + #power-domain-cells = <0>; + }; - nocp_mem1_1: nocp@10CA1C00 { - compatible = "samsung,exynos5420-nocp"; - reg = <0x10CA1C00 0x200>; - status = "disabled"; - }; + mfc_pd: power-domain@10044060 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044060 0x20>; + clocks = <&clock CLK_FIN_PLL>, + <&clock CLK_MOUT_USER_ACLK333>, + <&clock CLK_ACLK333>; + clock-names = "oscclk", "clk0","asb0"; + #power-domain-cells = <0>; + }; - nocp_g3d_0: nocp@11A51000 { - compatible = "samsung,exynos5420-nocp"; - reg = <0x11A51000 0x200>; - status = "disabled"; - }; + msc_pd: power-domain@10044120 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044120 0x20>; + #power-domain-cells = <0>; + }; - nocp_g3d_1: nocp@11A51400 { - compatible = "samsung,exynos5420-nocp"; - reg = <0x11A51400 0x200>; - status = "disabled"; - }; + disp_pd: power-domain@100440C0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x100440C0 0x20>; + #power-domain-cells = <0>; + clocks = <&clock CLK_FIN_PLL>, + <&clock CLK_MOUT_USER_ACLK200_DISP1>, + <&clock CLK_MOUT_USER_ACLK300_DISP1>, + <&clock CLK_MOUT_USER_ACLK400_DISP1>, + <&clock CLK_FIMD1>, <&clock CLK_MIXER>; + clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1"; + }; - gsc_pd: power-domain@10044000 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10044000 0x20>; - #power-domain-cells = <0>; - clocks = <&clock CLK_FIN_PLL>, - <&clock CLK_MOUT_USER_ACLK300_GSCL>, - <&clock CLK_GSCL0>, <&clock CLK_GSCL1>; - clock-names = "oscclk", "clk0", "asb0", "asb1"; - }; + pinctrl_0: pinctrl@13400000 { + compatible = "samsung,exynos5420-pinctrl"; + reg = <0x13400000 0x1000>; + interrupts = <0 45 0>; - isp_pd: power-domain@10044020 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10044020 0x20>; - #power-domain-cells = <0>; - }; + wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; + }; - mfc_pd: power-domain@10044060 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10044060 0x20>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>; - clock-names = "oscclk", "clk0"; - #power-domain-cells = <0>; - }; + pinctrl_1: pinctrl@13410000 { + compatible = "samsung,exynos5420-pinctrl"; + reg = <0x13410000 0x1000>; + interrupts = <0 78 0>; + }; - msc_pd: power-domain@10044120 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10044120 0x20>; - #power-domain-cells = <0>; - }; + pinctrl_2: pinctrl@14000000 { + compatible = "samsung,exynos5420-pinctrl"; + reg = <0x14000000 0x1000>; + interrupts = <0 46 0>; + }; - disp_pd: power-domain@100440C0 { - compatible = "samsung,exynos4210-pd"; - reg = <0x100440C0 0x20>; - #power-domain-cells = <0>; - clocks = <&clock CLK_FIN_PLL>, - <&clock CLK_MOUT_USER_ACLK200_DISP1>, - <&clock CLK_MOUT_USER_ACLK300_DISP1>, - <&clock CLK_MOUT_USER_ACLK400_DISP1>, - <&clock CLK_FIMD1>, <&clock CLK_MIXER>; - clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1"; - }; + pinctrl_3: pinctrl@14010000 { + compatible = "samsung,exynos5420-pinctrl"; + reg = <0x14010000 0x1000>; + interrupts = <0 50 0>; + }; - pinctrl_0: pinctrl@13400000 { - compatible = "samsung,exynos5420-pinctrl"; - reg = <0x13400000 0x1000>; - interrupts = <0 45 0>; + pinctrl_4: pinctrl@03860000 { + compatible = "samsung,exynos5420-pinctrl"; + reg = <0x03860000 0x1000>; + interrupts = <0 47 0>; + }; - wakeup-interrupt-controller { - compatible = "samsung,exynos4210-wakeup-eint"; + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; interrupt-parent = <&gic>; - interrupts = <0 32 0>; + ranges; + + adma: adma@03880000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x03880000 0x1000>; + interrupts = <0 110 0>; + clocks = <&clock_audss EXYNOS_ADMA>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <6>; + #dma-requests = <16>; + }; + + pdma0: pdma@121A0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121A0000 0x1000>; + interrupts = <0 34 0>; + clocks = <&clock CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@121B0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121B0000 0x1000>; + interrupts = <0 35 0>; + clocks = <&clock CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + mdma0: mdma@10800000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x10800000 0x1000>; + interrupts = <0 33 0>; + clocks = <&clock CLK_MDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + + mdma1: mdma@11C10000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x11C10000 0x1000>; + interrupts = <0 124 0>; + clocks = <&clock CLK_MDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + /* + * MDMA1 can support both secure and non-secure + * AXI transactions. When this is enabled in + * the kernel for boards that run in secure + * mode, we are getting imprecise external + * aborts causing the kernel to oops. + */ + status = "disabled"; + }; + }; + + i2s0: i2s@03830000 { + compatible = "samsung,exynos5420-i2s"; + reg = <0x03830000 0x100>; + dmas = <&adma 0 + &adma 2 + &adma 1>; + dma-names = "tx", "rx", "tx-sec"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + #clock-cells = <1>; + clock-output-names = "i2s_cdclk0"; + #sound-dai-cells = <1>; + samsung,idma-addr = <0x03000000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + status = "disabled"; }; - }; - - pinctrl_1: pinctrl@13410000 { - compatible = "samsung,exynos5420-pinctrl"; - reg = <0x13410000 0x1000>; - interrupts = <0 78 0>; - }; - pinctrl_2: pinctrl@14000000 { - compatible = "samsung,exynos5420-pinctrl"; - reg = <0x14000000 0x1000>; - interrupts = <0 46 0>; - }; - - pinctrl_3: pinctrl@14010000 { - compatible = "samsung,exynos5420-pinctrl"; - reg = <0x14010000 0x1000>; - interrupts = <0 50 0>; - }; - - pinctrl_4: pinctrl@03860000 { - compatible = "samsung,exynos5420-pinctrl"; - reg = <0x03860000 0x1000>; - interrupts = <0 47 0>; - }; - - amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - - adma: adma@03880000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x03880000 0x1000>; - interrupts = <0 110 0>; - clocks = <&clock_audss EXYNOS_ADMA>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <6>; - #dma-requests = <16>; - }; - - pdma0: pdma@121A0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121A0000 0x1000>; - interrupts = <0 34 0>; - clocks = <&clock CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@121B0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121B0000 0x1000>; - interrupts = <0 35 0>; - clocks = <&clock CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - mdma0: mdma@10800000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x10800000 0x1000>; - interrupts = <0 33 0>; - clocks = <&clock CLK_MDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - }; - - mdma1: mdma@11C10000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x11C10000 0x1000>; - interrupts = <0 124 0>; - clocks = <&clock CLK_MDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - /* - * MDMA1 can support both secure and non-secure - * AXI transactions. When this is enabled in the kernel - * for boards that run in secure mode, we are getting - * imprecise external aborts causing the kernel to oops. - */ + i2s1: i2s@12D60000 { + compatible = "samsung,exynos5420-i2s"; + reg = <0x12D60000 0x100>; + dmas = <&pdma1 12 + &pdma1 11>; + dma-names = "tx", "rx"; + clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>; + clock-names = "iis", "i2s_opclk0"; + #clock-cells = <1>; + clock-output-names = "i2s_cdclk1"; + #sound-dai-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1_bus>; status = "disabled"; }; - }; - - i2s0: i2s@03830000 { - compatible = "samsung,exynos5420-i2s"; - reg = <0x03830000 0x100>; - dmas = <&adma 0 - &adma 2 - &adma 1>; - dma-names = "tx", "rx", "tx-sec"; - clocks = <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_SCLK_I2S>; - clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; - #clock-cells = <1>; - clock-output-names = "i2s_cdclk0"; - #sound-dai-cells = <1>; - samsung,idma-addr = <0x03000000>; - pinctrl-names = "default"; - pinctrl-0 = <&i2s0_bus>; - status = "disabled"; - }; - - i2s1: i2s@12D60000 { - compatible = "samsung,exynos5420-i2s"; - reg = <0x12D60000 0x100>; - dmas = <&pdma1 12 - &pdma1 11>; - dma-names = "tx", "rx"; - clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>; - clock-names = "iis", "i2s_opclk0"; - #clock-cells = <1>; - clock-output-names = "i2s_cdclk1"; - #sound-dai-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&i2s1_bus>; - status = "disabled"; - }; - - i2s2: i2s@12D70000 { - compatible = "samsung,exynos5420-i2s"; - reg = <0x12D70000 0x100>; - dmas = <&pdma0 12 - &pdma0 11>; - dma-names = "tx", "rx"; - clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>; - clock-names = "iis", "i2s_opclk0"; - #clock-cells = <1>; - clock-output-names = "i2s_cdclk2"; - #sound-dai-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&i2s2_bus>; - status = "disabled"; - }; - - spi_0: spi@12d20000 { - compatible = "samsung,exynos4210-spi"; - reg = <0x12d20000 0x100>; - interrupts = <0 68 0>; - dmas = <&pdma0 5 - &pdma0 4>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_bus>; - clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>; - clock-names = "spi", "spi_busclk0"; - status = "disabled"; - }; - - spi_1: spi@12d30000 { - compatible = "samsung,exynos4210-spi"; - reg = <0x12d30000 0x100>; - interrupts = <0 69 0>; - dmas = <&pdma1 5 - &pdma1 4>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi1_bus>; - clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>; - clock-names = "spi", "spi_busclk0"; - status = "disabled"; - }; - - spi_2: spi@12d40000 { - compatible = "samsung,exynos4210-spi"; - reg = <0x12d40000 0x100>; - interrupts = <0 70 0>; - dmas = <&pdma0 7 - &pdma0 6>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_bus>; - clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>; - clock-names = "spi", "spi_busclk0"; - status = "disabled"; - }; - - pwm: pwm@12dd0000 { - compatible = "samsung,exynos4210-pwm"; - reg = <0x12dd0000 0x100>; - samsung,pwm-outputs = <0>, <1>, <2>, <3>; - #pwm-cells = <3>; - clocks = <&clock CLK_PWM>; - clock-names = "timers"; - }; - - dp_phy: dp-video-phy { - compatible = "samsung,exynos5420-dp-video-phy"; - samsung,pmu-syscon = <&pmu_system_controller>; - #phy-cells = <0>; - }; - - mipi_phy: mipi-video-phy { - compatible = "samsung,s5pv210-mipi-video-phy"; - syscon = <&pmu_system_controller>; - #phy-cells = <1>; - }; - - dsi@14500000 { - compatible = "samsung,exynos5410-mipi-dsi"; - reg = <0x14500000 0x10000>; - interrupts = <0 82 0>; - phys = <&mipi_phy 1>; - phy-names = "dsim"; - clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>; - clock-names = "bus_clk", "pll_clk"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - adc: adc@12D10000 { - compatible = "samsung,exynos-adc-v2"; - reg = <0x12D10000 0x100>; - interrupts = <0 106 0>; - clocks = <&clock CLK_TSADC>; - clock-names = "adc"; - #io-channel-cells = <1>; - io-channel-ranges; - samsung,syscon-phandle = <&pmu_system_controller>; - status = "disabled"; - }; - - i2c_0: i2c@12C60000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x12C60000 0x100>; - interrupts = <0 56 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C0>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_bus>; - samsung,sysreg-phandle = <&sysreg_system_controller>; - status = "disabled"; - }; - - i2c_1: i2c@12C70000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x12C70000 0x100>; - interrupts = <0 57 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C1>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_bus>; - samsung,sysreg-phandle = <&sysreg_system_controller>; - status = "disabled"; - }; - - i2c_2: i2c@12C80000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x12C80000 0x100>; - interrupts = <0 58 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C2>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_bus>; - samsung,sysreg-phandle = <&sysreg_system_controller>; - status = "disabled"; - }; - - i2c_3: i2c@12C90000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x12C90000 0x100>; - interrupts = <0 59 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C3>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_bus>; - samsung,sysreg-phandle = <&sysreg_system_controller>; - status = "disabled"; - }; - hsi2c_4: i2c@12CA0000 { - compatible = "samsung,exynos5-hsi2c"; - reg = <0x12CA0000 0x1000>; - interrupts = <0 60 0>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_hs_bus>; - clocks = <&clock CLK_USI0>; - clock-names = "hsi2c"; - status = "disabled"; - }; - - hsi2c_5: i2c@12CB0000 { - compatible = "samsung,exynos5-hsi2c"; - reg = <0x12CB0000 0x1000>; - interrupts = <0 61 0>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_hs_bus>; - clocks = <&clock CLK_USI1>; - clock-names = "hsi2c"; - status = "disabled"; - }; - - hsi2c_6: i2c@12CC0000 { - compatible = "samsung,exynos5-hsi2c"; - reg = <0x12CC0000 0x1000>; - interrupts = <0 62 0>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_hs_bus>; - clocks = <&clock CLK_USI2>; - clock-names = "hsi2c"; - status = "disabled"; - }; - - hsi2c_7: i2c@12CD0000 { - compatible = "samsung,exynos5-hsi2c"; - reg = <0x12CD0000 0x1000>; - interrupts = <0 63 0>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c7_hs_bus>; - clocks = <&clock CLK_USI3>; - clock-names = "hsi2c"; - status = "disabled"; - }; - - hsi2c_8: i2c@12E00000 { - compatible = "samsung,exynos5-hsi2c"; - reg = <0x12E00000 0x1000>; - interrupts = <0 87 0>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c8_hs_bus>; - clocks = <&clock CLK_USI4>; - clock-names = "hsi2c"; - status = "disabled"; - }; - - hsi2c_9: i2c@12E10000 { - compatible = "samsung,exynos5-hsi2c"; - reg = <0x12E10000 0x1000>; - interrupts = <0 88 0>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c9_hs_bus>; - clocks = <&clock CLK_USI5>; - clock-names = "hsi2c"; - status = "disabled"; - }; - - hsi2c_10: i2c@12E20000 { - compatible = "samsung,exynos5-hsi2c"; - reg = <0x12E20000 0x1000>; - interrupts = <0 203 0>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c10_hs_bus>; - clocks = <&clock CLK_USI6>; - clock-names = "hsi2c"; - status = "disabled"; - }; - - hdmi: hdmi@14530000 { - compatible = "samsung,exynos5420-hdmi"; - reg = <0x14530000 0x70000>; - interrupts = <0 95 0>; - clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, - <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, - <&clock CLK_MOUT_HDMI>; - clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", - "sclk_hdmiphy", "mout_hdmi"; - phy = <&hdmiphy>; - samsung,syscon-phandle = <&pmu_system_controller>; - status = "disabled"; - power-domains = <&disp_pd>; - }; - - hdmiphy: hdmiphy@145D0000 { - reg = <0x145D0000 0x20>; - }; - - mixer: mixer@14450000 { - compatible = "samsung,exynos5420-mixer"; - reg = <0x14450000 0x10000>; - interrupts = <0 94 0>; - clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, - <&clock CLK_SCLK_HDMI>; - clock-names = "mixer", "hdmi", "sclk_hdmi"; - power-domains = <&disp_pd>; - iommus = <&sysmmu_tv>; - }; - - rotator: rotator@11C00000 { - compatible = "samsung,exynos5250-rotator"; - reg = <0x11C00000 0x64>; - interrupts = <0 84 0>; - clocks = <&clock CLK_ROTATOR>; - clock-names = "rotator"; - iommus = <&sysmmu_rotator>; - }; - - gsc_0: video-scaler@13e00000 { - compatible = "samsung,exynos5-gsc"; - reg = <0x13e00000 0x1000>; - interrupts = <0 85 0>; - clocks = <&clock CLK_GSCL0>; - clock-names = "gscl"; - power-domains = <&gsc_pd>; - iommus = <&sysmmu_gscl0>; - }; - - gsc_1: video-scaler@13e10000 { - compatible = "samsung,exynos5-gsc"; - reg = <0x13e10000 0x1000>; - interrupts = <0 86 0>; - clocks = <&clock CLK_GSCL1>; - clock-names = "gscl"; - power-domains = <&gsc_pd>; - iommus = <&sysmmu_gscl1>; - }; - - jpeg_0: jpeg@11F50000 { - compatible = "samsung,exynos5420-jpeg"; - reg = <0x11F50000 0x1000>; - interrupts = <0 89 0>; - clock-names = "jpeg"; - clocks = <&clock CLK_JPEG>; - iommus = <&sysmmu_jpeg0>; - }; - - jpeg_1: jpeg@11F60000 { - compatible = "samsung,exynos5420-jpeg"; - reg = <0x11F60000 0x1000>; - interrupts = <0 168 0>; - clock-names = "jpeg"; - clocks = <&clock CLK_JPEG2>; - iommus = <&sysmmu_jpeg1>; - }; - - pmu_system_controller: system-controller@10040000 { - compatible = "samsung,exynos5420-pmu", "syscon"; - reg = <0x10040000 0x5000>; - clock-names = "clkout16"; - clocks = <&clock CLK_FIN_PLL>; - #clock-cells = <1>; - interrupt-controller; - #interrupt-cells = <3>; - interrupt-parent = <&gic>; - }; - - sysreg_system_controller: syscon@10050000 { - compatible = "samsung,exynos5-sysreg", "syscon"; - reg = <0x10050000 0x5000>; - }; - - tmu_cpu0: tmu@10060000 { - compatible = "samsung,exynos5420-tmu"; - reg = <0x10060000 0x100>; - interrupts = <0 65 0>; - clocks = <&clock CLK_TMU>; - clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" - }; - - tmu_cpu1: tmu@10064000 { - compatible = "samsung,exynos5420-tmu"; - reg = <0x10064000 0x100>; - interrupts = <0 183 0>; - clocks = <&clock CLK_TMU>; - clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" - }; - - tmu_cpu2: tmu@10068000 { - compatible = "samsung,exynos5420-tmu-ext-triminfo"; - reg = <0x10068000 0x100>, <0x1006c000 0x4>; - interrupts = <0 184 0>; - clocks = <&clock CLK_TMU>, <&clock CLK_TMU>; - clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" - }; - - tmu_cpu3: tmu@1006c000 { - compatible = "samsung,exynos5420-tmu-ext-triminfo"; - reg = <0x1006c000 0x100>, <0x100a0000 0x4>; - interrupts = <0 185 0>; - clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>; - clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" - }; - - tmu_gpu: tmu@100a0000 { - compatible = "samsung,exynos5420-tmu-ext-triminfo"; - reg = <0x100a0000 0x100>, <0x10068000 0x4>; - interrupts = <0 215 0>; - clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>; - clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" - }; - - thermal-zones { - cpu0_thermal: cpu0-thermal { - thermal-sensors = <&tmu_cpu0>; - #include "exynos5420-trip-points.dtsi" - }; - cpu1_thermal: cpu1-thermal { - thermal-sensors = <&tmu_cpu1>; - #include "exynos5420-trip-points.dtsi" - }; - cpu2_thermal: cpu2-thermal { - thermal-sensors = <&tmu_cpu2>; - #include "exynos5420-trip-points.dtsi" - }; - cpu3_thermal: cpu3-thermal { - thermal-sensors = <&tmu_cpu3>; - #include "exynos5420-trip-points.dtsi" - }; - gpu_thermal: gpu-thermal { - thermal-sensors = <&tmu_gpu>; - #include "exynos5420-trip-points.dtsi" + i2s2: i2s@12D70000 { + compatible = "samsung,exynos5420-i2s"; + reg = <0x12D70000 0x100>; + dmas = <&pdma0 12 + &pdma0 11>; + dma-names = "tx", "rx"; + clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>; + clock-names = "iis", "i2s_opclk0"; + #clock-cells = <1>; + clock-output-names = "i2s_cdclk2"; + #sound-dai-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s2_bus>; + status = "disabled"; }; - }; - watchdog: watchdog@101D0000 { - compatible = "samsung,exynos5420-wdt"; - reg = <0x101D0000 0x100>; - interrupts = <0 42 0>; - clocks = <&clock CLK_WDT>; - clock-names = "watchdog"; - samsung,syscon-phandle = <&pmu_system_controller>; - }; - - sss: sss@10830000 { - compatible = "samsung,exynos4210-secss"; - reg = <0x10830000 0x300>; - interrupts = <0 112 0>; - clocks = <&clock CLK_SSS>; - clock-names = "secss"; - }; - - usbdrd3_0: usb3-0 { - compatible = "samsung,exynos5250-dwusb3"; - clocks = <&clock CLK_USBD300>; - clock-names = "usbdrd30"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - usbdrd_dwc3_0: dwc3@12000000 { - compatible = "snps,dwc3"; - reg = <0x12000000 0x10000>; - interrupts = <0 72 0>; - phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>; - phy-names = "usb2-phy", "usb3-phy"; + spi_0: spi@12d20000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x12d20000 0x100>; + interrupts = <0 68 0>; + dmas = <&pdma0 5 + &pdma0 4>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; + clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>; + clock-names = "spi", "spi_busclk0"; + status = "disabled"; }; - }; - - usbdrd_phy0: phy@12100000 { - compatible = "samsung,exynos5420-usbdrd-phy"; - reg = <0x12100000 0x100>; - clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>; - clock-names = "phy", "ref"; - samsung,pmu-syscon = <&pmu_system_controller>; - #phy-cells = <1>; - }; - usbdrd3_1: usb3-1 { - compatible = "samsung,exynos5250-dwusb3"; - clocks = <&clock CLK_USBD301>; - clock-names = "usbdrd30"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - usbdrd_dwc3_1: dwc3@12400000 { - compatible = "snps,dwc3"; - reg = <0x12400000 0x10000>; - interrupts = <0 73 0>; - phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>; - phy-names = "usb2-phy", "usb3-phy"; + spi_1: spi@12d30000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x12d30000 0x100>; + interrupts = <0 69 0>; + dmas = <&pdma1 5 + &pdma1 4>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>; + clock-names = "spi", "spi_busclk0"; + status = "disabled"; }; - }; - - usbdrd_phy1: phy@12500000 { - compatible = "samsung,exynos5420-usbdrd-phy"; - reg = <0x12500000 0x100>; - clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>; - clock-names = "phy", "ref"; - samsung,pmu-syscon = <&pmu_system_controller>; - #phy-cells = <1>; - }; - - usbhost2: usb@12110000 { - compatible = "samsung,exynos4210-ehci"; - reg = <0x12110000 0x100>; - interrupts = <0 71 0>; - clocks = <&clock CLK_USBH20>; - clock-names = "usbhost"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - phys = <&usb2_phy 1>; + spi_2: spi@12d40000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x12d40000 0x100>; + interrupts = <0 70 0>; + dmas = <&pdma0 7 + &pdma0 6>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_bus>; + clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>; + clock-names = "spi", "spi_busclk0"; + status = "disabled"; }; - }; - usbhost1: usb@12120000 { - compatible = "samsung,exynos4210-ohci"; - reg = <0x12120000 0x100>; - interrupts = <0 71 0>; - - clocks = <&clock CLK_USBH20>; - clock-names = "usbhost"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - phys = <&usb2_phy 1>; + dp_phy: dp-video-phy { + compatible = "samsung,exynos5420-dp-video-phy"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <0>; }; - }; - - usb2_phy: phy@12130000 { - compatible = "samsung,exynos5250-usb2-phy"; - reg = <0x12130000 0x100>; - clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>; - clock-names = "phy", "ref"; - #phy-cells = <1>; - samsung,sysreg-phandle = <&sysreg_system_controller>; - samsung,pmureg-phandle = <&pmu_system_controller>; - }; - - sysmmu_g2dr: sysmmu@0x10A60000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x10A60000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <24 5>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; - #iommu-cells = <0>; - }; - - sysmmu_g2dw: sysmmu@0x10A70000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x10A70000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <22 2>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; - #iommu-cells = <0>; - }; - - sysmmu_tv: sysmmu@0x14650000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x14650000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <7 4>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>; - power-domains = <&disp_pd>; - #iommu-cells = <0>; - }; - - sysmmu_gscl0: sysmmu@0x13E80000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13E80000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <2 0>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>; - power-domains = <&gsc_pd>; - #iommu-cells = <0>; - }; - - sysmmu_gscl1: sysmmu@0x13E90000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13E90000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <2 2>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>; - power-domains = <&gsc_pd>; - #iommu-cells = <0>; - }; - - sysmmu_scaler0r: sysmmu@0x12880000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x12880000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <22 4>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>; - #iommu-cells = <0>; - }; - - sysmmu_scaler1r: sysmmu@0x12890000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x12890000 0x1000>; - interrupts = <0 186 0>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>; - #iommu-cells = <0>; - }; - sysmmu_scaler2r: sysmmu@0x128A0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x128A0000 0x1000>; - interrupts = <0 188 0>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>; - #iommu-cells = <0>; - }; - - sysmmu_scaler0w: sysmmu@0x128C0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x128C0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <27 2>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>; - #iommu-cells = <0>; - }; - - sysmmu_scaler1w: sysmmu@0x128D0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x128D0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <22 6>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>; - #iommu-cells = <0>; - }; - - sysmmu_scaler2w: sysmmu@0x128E0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x128E0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <19 6>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>; - #iommu-cells = <0>; - }; - - sysmmu_rotator: sysmmu@0x11D40000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11D40000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <4 0>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>; - #iommu-cells = <0>; - }; - - sysmmu_jpeg0: sysmmu@0x11F10000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11F10000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <4 2>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>; - #iommu-cells = <0>; - }; - - sysmmu_jpeg1: sysmmu@0x11F20000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11F20000 0x1000>; - interrupts = <0 169 0>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>; - #iommu-cells = <0>; - }; - - sysmmu_mfc_l: sysmmu@0x11200000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11200000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <6 2>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>; - power-domains = <&mfc_pd>; - #iommu-cells = <0>; - }; - - sysmmu_mfc_r: sysmmu@0x11210000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11210000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <8 5>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>; - power-domains = <&mfc_pd>; - #iommu-cells = <0>; - }; - - sysmmu_fimd1_0: sysmmu@0x14640000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x14640000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <3 2>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>; - power-domains = <&disp_pd>; - #iommu-cells = <0>; - }; - - sysmmu_fimd1_1: sysmmu@0x14680000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x14680000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <3 0>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>; - power-domains = <&disp_pd>; - #iommu-cells = <0>; - }; - - bus_wcore: bus_wcore { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK400_WCORE>; - clock-names = "bus"; - operating-points-v2 = <&bus_wcore_opp_table>; - status = "disabled"; - }; - - bus_noc: bus_noc { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK100_NOC>; - clock-names = "bus"; - operating-points-v2 = <&bus_noc_opp_table>; - status = "disabled"; - }; - - bus_fsys_apb: bus_fsys_apb { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_PCLK200_FSYS>; - clock-names = "bus"; - operating-points-v2 = <&bus_fsys_apb_opp_table>; - status = "disabled"; - }; - - bus_fsys: bus_fsys { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK200_FSYS>; - clock-names = "bus"; - operating-points-v2 = <&bus_fsys_apb_opp_table>; - status = "disabled"; - }; - - bus_fsys2: bus_fsys2 { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK200_FSYS2>; - clock-names = "bus"; - operating-points-v2 = <&bus_fsys2_opp_table>; - status = "disabled"; - }; - - bus_mfc: bus_mfc { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK333>; - clock-names = "bus"; - operating-points-v2 = <&bus_mfc_opp_table>; - status = "disabled"; - }; - - bus_gen: bus_gen { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK266>; - clock-names = "bus"; - operating-points-v2 = <&bus_gen_opp_table>; - status = "disabled"; - }; - - bus_peri: bus_peri { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK66>; - clock-names = "bus"; - operating-points-v2 = <&bus_peri_opp_table>; - status = "disabled"; - }; - - bus_g2d: bus_g2d { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK333_G2D>; - clock-names = "bus"; - operating-points-v2 = <&bus_g2d_opp_table>; - status = "disabled"; - }; - - bus_g2d_acp: bus_g2d_acp { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK266_G2D>; - clock-names = "bus"; - operating-points-v2 = <&bus_g2d_acp_opp_table>; - status = "disabled"; - }; - - bus_jpeg: bus_jpeg { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK300_JPEG>; - clock-names = "bus"; - operating-points-v2 = <&bus_jpeg_opp_table>; - status = "disabled"; - }; - - bus_jpeg_apb: bus_jpeg_apb { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK166>; - clock-names = "bus"; - operating-points-v2 = <&bus_jpeg_apb_opp_table>; - status = "disabled"; - }; - - bus_disp1_fimd: bus_disp1_fimd { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK300_DISP1>; - clock-names = "bus"; - operating-points-v2 = <&bus_disp1_fimd_opp_table>; - status = "disabled"; - }; - - bus_disp1: bus_disp1 { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK400_DISP1>; - clock-names = "bus"; - operating-points-v2 = <&bus_disp1_opp_table>; - status = "disabled"; - }; - - bus_gscl_scaler: bus_gscl_scaler { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK300_GSCL>; - clock-names = "bus"; - operating-points-v2 = <&bus_gscl_opp_table>; - status = "disabled"; - }; - - bus_mscl: bus_mscl { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK400_MSCL>; - clock-names = "bus"; - operating-points-v2 = <&bus_mscl_opp_table>; - status = "disabled"; - }; - - bus_wcore_opp_table: opp_table2 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <84000000>; - opp-microvolt = <925000>; - }; - opp01 { - opp-hz = /bits/ 64 <111000000>; - opp-microvolt = <950000>; - }; - opp02 { - opp-hz = /bits/ 64 <222000000>; - opp-microvolt = <950000>; + mipi_phy: mipi-video-phy { + compatible = "samsung,s5pv210-mipi-video-phy"; + syscon = <&pmu_system_controller>; + #phy-cells = <1>; }; - opp03 { - opp-hz = /bits/ 64 <333000000>; - opp-microvolt = <950000>; - }; - opp04 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <987500>; - }; - }; - bus_noc_opp_table: opp_table3 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <67000000>; - }; - opp01 { - opp-hz = /bits/ 64 <75000000>; - }; - opp02 { - opp-hz = /bits/ 64 <86000000>; - }; - opp03 { - opp-hz = /bits/ 64 <100000000>; + dsi@14500000 { + compatible = "samsung,exynos5410-mipi-dsi"; + reg = <0x14500000 0x10000>; + interrupts = <0 82 0>; + phys = <&mipi_phy 1>; + phy-names = "dsim"; + clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>; + clock-names = "bus_clk", "pll_clk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; - }; - - bus_fsys_apb_opp_table: opp_table4 { - compatible = "operating-points-v2"; - opp-shared; - opp00 { - opp-hz = /bits/ 64 <100000000>; - }; - opp01 { - opp-hz = /bits/ 64 <200000000>; + adc: adc@12D10000 { + compatible = "samsung,exynos-adc-v2"; + reg = <0x12D10000 0x100>; + interrupts = <0 106 0>; + clocks = <&clock CLK_TSADC>; + clock-names = "adc"; + #io-channel-cells = <1>; + io-channel-ranges; + samsung,syscon-phandle = <&pmu_system_controller>; + status = "disabled"; }; - }; - - bus_fsys2_opp_table: opp_table5 { - compatible = "operating-points-v2"; - opp00 { - opp-hz = /bits/ 64 <75000000>; - }; - opp01 { - opp-hz = /bits/ 64 <100000000>; - }; - opp02 { - opp-hz = /bits/ 64 <150000000>; + hsi2c_8: i2c@12E00000 { + compatible = "samsung,exynos5250-hsi2c"; + reg = <0x12E00000 0x1000>; + interrupts = <0 87 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c8_hs_bus>; + clocks = <&clock CLK_USI4>; + clock-names = "hsi2c"; + status = "disabled"; }; - }; - bus_mfc_opp_table: opp_table6 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <96000000>; - }; - opp01 { - opp-hz = /bits/ 64 <111000000>; - }; - opp02 { - opp-hz = /bits/ 64 <167000000>; - }; - opp03 { - opp-hz = /bits/ 64 <222000000>; - }; - opp04 { - opp-hz = /bits/ 64 <333000000>; + hsi2c_9: i2c@12E10000 { + compatible = "samsung,exynos5250-hsi2c"; + reg = <0x12E10000 0x1000>; + interrupts = <0 88 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c9_hs_bus>; + clocks = <&clock CLK_USI5>; + clock-names = "hsi2c"; + status = "disabled"; }; - }; - bus_gen_opp_table: opp_table7 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <89000000>; - }; - opp01 { - opp-hz = /bits/ 64 <133000000>; - }; - opp02 { - opp-hz = /bits/ 64 <178000000>; - }; - opp03 { - opp-hz = /bits/ 64 <267000000>; + hsi2c_10: i2c@12E20000 { + compatible = "samsung,exynos5250-hsi2c"; + reg = <0x12E20000 0x1000>; + interrupts = <0 203 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c10_hs_bus>; + clocks = <&clock CLK_USI6>; + clock-names = "hsi2c"; + status = "disabled"; }; - }; - - bus_peri_opp_table: opp_table8 { - compatible = "operating-points-v2"; - opp00 { - opp-hz = /bits/ 64 <67000000>; + hdmi: hdmi@14530000 { + compatible = "samsung,exynos5420-hdmi"; + reg = <0x14530000 0x70000>; + interrupts = <0 95 0>; + clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, + <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, + <&clock CLK_MOUT_HDMI>; + clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", + "sclk_hdmiphy", "mout_hdmi"; + phy = <&hdmiphy>; + samsung,syscon-phandle = <&pmu_system_controller>; + status = "disabled"; + power-domains = <&disp_pd>; + }; + + hdmiphy: hdmiphy@145D0000 { + reg = <0x145D0000 0x20>; + }; + + mixer: mixer@14450000 { + compatible = "samsung,exynos5420-mixer"; + reg = <0x14450000 0x10000>; + interrupts = <0 94 0>; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>; + clock-names = "mixer", "hdmi", "sclk_hdmi"; + power-domains = <&disp_pd>; + iommus = <&sysmmu_tv>; + }; + + rotator: rotator@11C00000 { + compatible = "samsung,exynos5250-rotator"; + reg = <0x11C00000 0x64>; + interrupts = <0 84 0>; + clocks = <&clock CLK_ROTATOR>; + clock-names = "rotator"; + iommus = <&sysmmu_rotator>; + }; + + gsc_0: video-scaler@13e00000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e00000 0x1000>; + interrupts = <0 85 0>; + clocks = <&clock CLK_GSCL0>; + clock-names = "gscl"; + power-domains = <&gsc_pd>; + iommus = <&sysmmu_gscl0>; + }; + + gsc_1: video-scaler@13e10000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e10000 0x1000>; + interrupts = <0 86 0>; + clocks = <&clock CLK_GSCL1>; + clock-names = "gscl"; + power-domains = <&gsc_pd>; + iommus = <&sysmmu_gscl1>; + }; + + jpeg_0: jpeg@11F50000 { + compatible = "samsung,exynos5420-jpeg"; + reg = <0x11F50000 0x1000>; + interrupts = <0 89 0>; + clock-names = "jpeg"; + clocks = <&clock CLK_JPEG>; + iommus = <&sysmmu_jpeg0>; + }; + + jpeg_1: jpeg@11F60000 { + compatible = "samsung,exynos5420-jpeg"; + reg = <0x11F60000 0x1000>; + interrupts = <0 168 0>; + clock-names = "jpeg"; + clocks = <&clock CLK_JPEG2>; + iommus = <&sysmmu_jpeg1>; + }; + + pmu_system_controller: system-controller@10040000 { + compatible = "samsung,exynos5420-pmu", "syscon"; + reg = <0x10040000 0x5000>; + clock-names = "clkout16"; + clocks = <&clock CLK_FIN_PLL>; + #clock-cells = <1>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; }; - }; - - bus_g2d_opp_table: opp_table9 { - compatible = "operating-points-v2"; - opp00 { - opp-hz = /bits/ 64 <84000000>; - }; - opp01 { - opp-hz = /bits/ 64 <167000000>; - }; - opp02 { - opp-hz = /bits/ 64 <222000000>; - }; - opp03 { - opp-hz = /bits/ 64 <300000000>; - }; - opp04 { - opp-hz = /bits/ 64 <333000000>; + tmu_cpu0: tmu@10060000 { + compatible = "samsung,exynos5420-tmu"; + reg = <0x10060000 0x100>; + interrupts = <0 65 0>; + clocks = <&clock CLK_TMU>; + clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; + + tmu_cpu1: tmu@10064000 { + compatible = "samsung,exynos5420-tmu"; + reg = <0x10064000 0x100>; + interrupts = <0 183 0>; + clocks = <&clock CLK_TMU>; + clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; + + tmu_cpu2: tmu@10068000 { + compatible = "samsung,exynos5420-tmu-ext-triminfo"; + reg = <0x10068000 0x100>, <0x1006c000 0x4>; + interrupts = <0 184 0>; + clocks = <&clock CLK_TMU>, <&clock CLK_TMU>; + clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; + + tmu_cpu3: tmu@1006c000 { + compatible = "samsung,exynos5420-tmu-ext-triminfo"; + reg = <0x1006c000 0x100>, <0x100a0000 0x4>; + interrupts = <0 185 0>; + clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>; + clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; + + tmu_gpu: tmu@100a0000 { + compatible = "samsung,exynos5420-tmu-ext-triminfo"; + reg = <0x100a0000 0x100>, <0x10068000 0x4>; + interrupts = <0 215 0>; + clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>; + clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; + + sysmmu_g2dr: sysmmu@0x10A60000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x10A60000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <24 5>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; + #iommu-cells = <0>; + }; + + sysmmu_g2dw: sysmmu@0x10A70000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x10A70000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <22 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; + #iommu-cells = <0>; + }; + + sysmmu_tv: sysmmu@0x14650000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14650000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <7 4>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>; + power-domains = <&disp_pd>; + #iommu-cells = <0>; + }; + + sysmmu_gscl0: sysmmu@0x13E80000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13E80000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <2 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>; + power-domains = <&gsc_pd>; + #iommu-cells = <0>; + }; + + sysmmu_gscl1: sysmmu@0x13E90000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13E90000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <2 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>; + power-domains = <&gsc_pd>; + #iommu-cells = <0>; + }; + + sysmmu_scaler0r: sysmmu@0x12880000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12880000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <22 4>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>; + #iommu-cells = <0>; + }; + + sysmmu_scaler1r: sysmmu@0x12890000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12890000 0x1000>; + interrupts = <0 186 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>; + #iommu-cells = <0>; + }; + + sysmmu_scaler2r: sysmmu@0x128A0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x128A0000 0x1000>; + interrupts = <0 188 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>; + #iommu-cells = <0>; + }; + + sysmmu_scaler0w: sysmmu@0x128C0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x128C0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <27 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>; + #iommu-cells = <0>; + }; + + sysmmu_scaler1w: sysmmu@0x128D0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x128D0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <22 6>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>; + #iommu-cells = <0>; + }; + + sysmmu_scaler2w: sysmmu@0x128E0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x128E0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <19 6>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>; + #iommu-cells = <0>; + }; + + sysmmu_rotator: sysmmu@0x11D40000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11D40000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>; + #iommu-cells = <0>; + }; + + sysmmu_jpeg0: sysmmu@0x11F10000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11F10000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>; + #iommu-cells = <0>; + }; + + sysmmu_jpeg1: sysmmu@0x11F20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11F20000 0x1000>; + interrupts = <0 169 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>; + #iommu-cells = <0>; + }; + + sysmmu_mfc_l: sysmmu@0x11200000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11200000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <6 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>; + power-domains = <&mfc_pd>; + #iommu-cells = <0>; + }; + + sysmmu_mfc_r: sysmmu@0x11210000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11210000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <8 5>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>; + power-domains = <&mfc_pd>; + #iommu-cells = <0>; + }; + + sysmmu_fimd1_0: sysmmu@0x14640000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14640000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <3 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>; + power-domains = <&disp_pd>; + #iommu-cells = <0>; + }; + + sysmmu_fimd1_1: sysmmu@0x14680000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14680000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <3 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>; + power-domains = <&disp_pd>; + #iommu-cells = <0>; + }; + + bus_wcore: bus_wcore { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK400_WCORE>; + clock-names = "bus"; + operating-points-v2 = <&bus_wcore_opp_table>; + status = "disabled"; }; - }; - - bus_g2d_acp_opp_table: opp_table10 { - compatible = "operating-points-v2"; - opp00 { - opp-hz = /bits/ 64 <67000000>; - }; - opp01 { - opp-hz = /bits/ 64 <133000000>; - }; - opp02 { - opp-hz = /bits/ 64 <178000000>; - }; - opp03 { - opp-hz = /bits/ 64 <267000000>; + bus_noc: bus_noc { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK100_NOC>; + clock-names = "bus"; + operating-points-v2 = <&bus_noc_opp_table>; + status = "disabled"; }; - }; - - bus_jpeg_opp_table: opp_table11 { - compatible = "operating-points-v2"; - opp00 { - opp-hz = /bits/ 64 <75000000>; - }; - opp01 { - opp-hz = /bits/ 64 <150000000>; - }; - opp02 { - opp-hz = /bits/ 64 <200000000>; - }; - opp03 { - opp-hz = /bits/ 64 <300000000>; + bus_fsys_apb: bus_fsys_apb { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_PCLK200_FSYS>; + clock-names = "bus"; + operating-points-v2 = <&bus_fsys_apb_opp_table>; + status = "disabled"; }; - }; - - bus_jpeg_apb_opp_table: opp_table12 { - compatible = "operating-points-v2"; - opp00 { - opp-hz = /bits/ 64 <84000000>; - }; - opp01 { - opp-hz = /bits/ 64 <111000000>; + bus_fsys: bus_fsys { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK200_FSYS>; + clock-names = "bus"; + operating-points-v2 = <&bus_fsys_apb_opp_table>; + status = "disabled"; }; - opp02 { - opp-hz = /bits/ 64 <134000000>; + + bus_fsys2: bus_fsys2 { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK200_FSYS2>; + clock-names = "bus"; + operating-points-v2 = <&bus_fsys2_opp_table>; + status = "disabled"; }; - opp03 { - opp-hz = /bits/ 64 <167000000>; + + bus_mfc: bus_mfc { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK333>; + clock-names = "bus"; + operating-points-v2 = <&bus_mfc_opp_table>; + status = "disabled"; }; - }; - bus_disp1_fimd_opp_table: opp_table13 { - compatible = "operating-points-v2"; + bus_gen: bus_gen { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK266>; + clock-names = "bus"; + operating-points-v2 = <&bus_gen_opp_table>; + status = "disabled"; + }; - opp00 { - opp-hz = /bits/ 64 <120000000>; + bus_peri: bus_peri { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK66>; + clock-names = "bus"; + operating-points-v2 = <&bus_peri_opp_table>; + status = "disabled"; }; - opp01 { - opp-hz = /bits/ 64 <200000000>; + + bus_g2d: bus_g2d { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK333_G2D>; + clock-names = "bus"; + operating-points-v2 = <&bus_g2d_opp_table>; + status = "disabled"; }; - }; - bus_disp1_opp_table: opp_table14 { - compatible = "operating-points-v2"; + bus_g2d_acp: bus_g2d_acp { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK266_G2D>; + clock-names = "bus"; + operating-points-v2 = <&bus_g2d_acp_opp_table>; + status = "disabled"; + }; - opp00 { - opp-hz = /bits/ 64 <120000000>; + bus_jpeg: bus_jpeg { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK300_JPEG>; + clock-names = "bus"; + operating-points-v2 = <&bus_jpeg_opp_table>; + status = "disabled"; }; - opp01 { - opp-hz = /bits/ 64 <200000000>; + + bus_jpeg_apb: bus_jpeg_apb { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK166>; + clock-names = "bus"; + operating-points-v2 = <&bus_jpeg_apb_opp_table>; + status = "disabled"; }; - opp02 { - opp-hz = /bits/ 64 <300000000>; + + bus_disp1_fimd: bus_disp1_fimd { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK300_DISP1>; + clock-names = "bus"; + operating-points-v2 = <&bus_disp1_fimd_opp_table>; + status = "disabled"; }; - }; - bus_gscl_opp_table: opp_table15 { - compatible = "operating-points-v2"; + bus_disp1: bus_disp1 { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK400_DISP1>; + clock-names = "bus"; + operating-points-v2 = <&bus_disp1_opp_table>; + status = "disabled"; + }; - opp00 { - opp-hz = /bits/ 64 <150000000>; + bus_gscl_scaler: bus_gscl_scaler { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK300_GSCL>; + clock-names = "bus"; + operating-points-v2 = <&bus_gscl_opp_table>; + status = "disabled"; }; - opp01 { - opp-hz = /bits/ 64 <200000000>; + + bus_mscl: bus_mscl { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK400_MSCL>; + clock-names = "bus"; + operating-points-v2 = <&bus_mscl_opp_table>; + status = "disabled"; }; - opp02 { - opp-hz = /bits/ 64 <300000000>; + + bus_wcore_opp_table: opp_table2 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <84000000>; + opp-microvolt = <925000>; + }; + opp01 { + opp-hz = /bits/ 64 <111000000>; + opp-microvolt = <950000>; + }; + opp02 { + opp-hz = /bits/ 64 <222000000>; + opp-microvolt = <950000>; + }; + opp03 { + opp-hz = /bits/ 64 <333000000>; + opp-microvolt = <950000>; + }; + opp04 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <987500>; + }; + }; + + bus_noc_opp_table: opp_table3 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <67000000>; + }; + opp01 { + opp-hz = /bits/ 64 <75000000>; + }; + opp02 { + opp-hz = /bits/ 64 <86000000>; + }; + opp03 { + opp-hz = /bits/ 64 <100000000>; + }; + }; + + bus_fsys_apb_opp_table: opp_table4 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <100000000>; + }; + opp01 { + opp-hz = /bits/ 64 <200000000>; + }; + }; + + bus_fsys2_opp_table: opp_table5 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <75000000>; + }; + opp01 { + opp-hz = /bits/ 64 <100000000>; + }; + opp02 { + opp-hz = /bits/ 64 <150000000>; + }; + }; + + bus_mfc_opp_table: opp_table6 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <96000000>; + }; + opp01 { + opp-hz = /bits/ 64 <111000000>; + }; + opp02 { + opp-hz = /bits/ 64 <167000000>; + }; + opp03 { + opp-hz = /bits/ 64 <222000000>; + }; + opp04 { + opp-hz = /bits/ 64 <333000000>; + }; + }; + + bus_gen_opp_table: opp_table7 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <89000000>; + }; + opp01 { + opp-hz = /bits/ 64 <133000000>; + }; + opp02 { + opp-hz = /bits/ 64 <178000000>; + }; + opp03 { + opp-hz = /bits/ 64 <267000000>; + }; + }; + + bus_peri_opp_table: opp_table8 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <67000000>; + }; + }; + + bus_g2d_opp_table: opp_table9 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <84000000>; + }; + opp01 { + opp-hz = /bits/ 64 <167000000>; + }; + opp02 { + opp-hz = /bits/ 64 <222000000>; + }; + opp03 { + opp-hz = /bits/ 64 <300000000>; + }; + opp04 { + opp-hz = /bits/ 64 <333000000>; + }; + }; + + bus_g2d_acp_opp_table: opp_table10 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <67000000>; + }; + opp01 { + opp-hz = /bits/ 64 <133000000>; + }; + opp02 { + opp-hz = /bits/ 64 <178000000>; + }; + opp03 { + opp-hz = /bits/ 64 <267000000>; + }; + }; + + bus_jpeg_opp_table: opp_table11 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <75000000>; + }; + opp01 { + opp-hz = /bits/ 64 <150000000>; + }; + opp02 { + opp-hz = /bits/ 64 <200000000>; + }; + opp03 { + opp-hz = /bits/ 64 <300000000>; + }; + }; + + bus_jpeg_apb_opp_table: opp_table12 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <84000000>; + }; + opp01 { + opp-hz = /bits/ 64 <111000000>; + }; + opp02 { + opp-hz = /bits/ 64 <134000000>; + }; + opp03 { + opp-hz = /bits/ 64 <167000000>; + }; + }; + + bus_disp1_fimd_opp_table: opp_table13 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <120000000>; + }; + opp01 { + opp-hz = /bits/ 64 <200000000>; + }; + }; + + bus_disp1_opp_table: opp_table14 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <120000000>; + }; + opp01 { + opp-hz = /bits/ 64 <200000000>; + }; + opp02 { + opp-hz = /bits/ 64 <300000000>; + }; + }; + + bus_gscl_opp_table: opp_table15 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <150000000>; + }; + opp01 { + opp-hz = /bits/ 64 <200000000>; + }; + opp02 { + opp-hz = /bits/ 64 <300000000>; + }; + }; + + bus_mscl_opp_table: opp_table16 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <84000000>; + }; + opp01 { + opp-hz = /bits/ 64 <167000000>; + }; + opp02 { + opp-hz = /bits/ 64 <222000000>; + }; + opp03 { + opp-hz = /bits/ 64 <333000000>; + }; + opp04 { + opp-hz = /bits/ 64 <400000000>; + }; }; }; - bus_mscl_opp_table: opp_table16 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <84000000>; + thermal-zones { + cpu0_thermal: cpu0-thermal { + thermal-sensors = <&tmu_cpu0>; + #include "exynos5420-trip-points.dtsi" }; - opp01 { - opp-hz = /bits/ 64 <167000000>; + cpu1_thermal: cpu1-thermal { + thermal-sensors = <&tmu_cpu1>; + #include "exynos5420-trip-points.dtsi" }; - opp02 { - opp-hz = /bits/ 64 <222000000>; + cpu2_thermal: cpu2-thermal { + thermal-sensors = <&tmu_cpu2>; + #include "exynos5420-trip-points.dtsi" }; - opp03 { - opp-hz = /bits/ 64 <333000000>; + cpu3_thermal: cpu3-thermal { + thermal-sensors = <&tmu_cpu3>; + #include "exynos5420-trip-points.dtsi" }; - opp04 { - opp-hz = /bits/ 64 <400000000>; + gpu_thermal: gpu-thermal { + thermal-sensors = <&tmu_gpu>; + #include "exynos5420-trip-points.dtsi" }; }; }; @@ -1614,6 +1330,72 @@ iommu-names = "m0", "m1"; }; +&i2c_0 { + clocks = <&clock CLK_I2C0>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; +}; + +&i2c_1 { + clocks = <&clock CLK_I2C1>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; +}; + +&i2c_2 { + clocks = <&clock CLK_I2C2>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; +}; + +&i2c_3 { + clocks = <&clock CLK_I2C3>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_bus>; +}; + +&hsi2c_4 { + clocks = <&clock CLK_USI0>; + clock-names = "hsi2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_hs_bus>; +}; + +&hsi2c_5 { + clocks = <&clock CLK_USI1>; + clock-names = "hsi2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_hs_bus>; +}; + +&hsi2c_6 { + clocks = <&clock CLK_USI2>; + clock-names = "hsi2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_hs_bus>; +}; + +&hsi2c_7 { + clocks = <&clock CLK_USI3>; + clock-names = "hsi2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_hs_bus>; +}; + +&mct { + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; + clock-names = "fin_pll", "mct"; +}; + +&pwm { + clocks = <&clock CLK_PWM>; + clock-names = "timers"; +}; + &rtc { clocks = <&clock CLK_RTC>; clock-names = "rtc"; @@ -1641,4 +1423,58 @@ clock-names = "uart", "clk_uart_baud0"; }; +&sss { + clocks = <&clock CLK_SSS>; + clock-names = "secss"; +}; + +&usbdrd3_0 { + clocks = <&clock CLK_USBD300>; + clock-names = "usbdrd30"; +}; + +&usbdrd_phy0 { + clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>; + clock-names = "phy", "ref"; + samsung,pmu-syscon = <&pmu_system_controller>; +}; + +&usbdrd3_1 { + clocks = <&clock CLK_USBD301>; + clock-names = "usbdrd30"; +}; + +&usbdrd_dwc3_1 { + interrupts = <GIC_SPI 73 0>; +}; + +&usbdrd_phy1 { + clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>; + clock-names = "phy", "ref"; + samsung,pmu-syscon = <&pmu_system_controller>; +}; + +&usbhost1 { + clocks = <&clock CLK_USBH20>; + clock-names = "usbhost"; +}; + +&usbhost2 { + clocks = <&clock CLK_USBH20>; + clock-names = "usbhost"; +}; + +&usb2_phy { + clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>; + clock-names = "phy", "ref"; + samsung,sysreg-phandle = <&sysreg_system_controller>; + samsung,pmureg-phandle = <&pmu_system_controller>; +}; + +&watchdog { + clocks = <&clock CLK_WDT>; + clock-names = "watchdog"; + samsung,syscon-phandle = <&pmu_system_controller>; +}; + #include "exynos5420-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi deleted file mode 100644 index 3e4c4ad96d63..000000000000 --- a/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi +++ /dev/null @@ -1,103 +0,0 @@ -/* - * Device tree sources for Exynos5422 thermal zone - * - * Copyright (c) 2015 Lukasz Majewski <l.majewski@samsung.com> - * Anand Moon <linux.amoon@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <dt-bindings/thermal/thermal.h> - -/ { - thermal-zones { - cpu0_thermal: cpu0-thermal { - thermal-sensors = <&tmu_cpu0 0>; - polling-delay-passive = <250>; - polling-delay = <0>; - trips { - cpu_alert0: cpu-alert-0 { - temperature = <50000>; /* millicelsius */ - hysteresis = <5000>; /* millicelsius */ - type = "active"; - }; - cpu_alert1: cpu-alert-1 { - temperature = <60000>; /* millicelsius */ - hysteresis = <5000>; /* millicelsius */ - type = "active"; - }; - cpu_alert2: cpu-alert-2 { - temperature = <70000>; /* millicelsius */ - hysteresis = <5000>; /* millicelsius */ - type = "active"; - }; - cpu_crit0: cpu-crit-0 { - temperature = <120000>; /* millicelsius */ - hysteresis = <0>; /* millicelsius */ - type = "critical"; - }; - /* - * Exyunos542x support only 4 trip-points - * so for these polling mode is required. - * Start polling at temperature level of last - * interrupt-driven trip: cpu_alert2 - */ - cpu_alert3: cpu-alert-3 { - temperature = <70000>; /* millicelsius */ - hysteresis = <10000>; /* millicelsius */ - type = "passive"; - }; - cpu_alert4: cpu-alert-4 { - temperature = <85000>; /* millicelsius */ - hysteresis = <10000>; /* millicelsius */ - type = "passive"; - }; - - }; - cooling-maps { - map0 { - trip = <&cpu_alert0>; - cooling-device = <&fan0 0 1>; - }; - map1 { - trip = <&cpu_alert1>; - cooling-device = <&fan0 1 2>; - }; - map2 { - trip = <&cpu_alert2>; - cooling-device = <&fan0 2 3>; - }; - /* - * When reaching cpu_alert3, reduce CPU - * by 2 steps. On Exynos5422/5800 that would - * be: 1500 MHz and 1100 MHz. - */ - map3 { - trip = <&cpu_alert3>; - cooling-device = <&cpu0 0 2>; - }; - map4 { - trip = <&cpu_alert3>; - cooling-device = <&cpu4 0 2>; - }; - - /* - * When reaching cpu_alert4, reduce CPU - * further, down to 600 MHz (11 steps for big, - * 7 steps for LITTLE). - */ - map5 { - trip = <&cpu_alert4>; - cooling-device = <&cpu0 3 7>; - }; - map6 { - trip = <&cpu_alert4>; - cooling-device = <&cpu4 3 11>; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 7c2335f18bfc..d56253049ccb 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -1,9 +1,11 @@ /* * Hardkernel Odroid XU3 board device tree source * - * Copyright (c) 2014 Collabora Ltd. * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com + * Copyright (c) 2014 Collabora Ltd. + * Copyright (c) 2015 Lukasz Majewski <l.majewski@samsung.com> + * Anand Moon <linux.amoon@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -16,7 +18,6 @@ #include <dt-bindings/sound/samsung-i2s.h> #include "exynos5800.dtsi" #include "exynos5422-cpus.dtsi" -#include "exynos5422-cpu-thermal.dtsi" #include "exynos-mfc-reserved-memory.dtsi" / { @@ -55,6 +56,94 @@ #cooling-cells = <2>; cooling-levels = <0 130 170 230>; }; + + thermal-zones { + cpu0_thermal: cpu0-thermal { + thermal-sensors = <&tmu_cpu0 0>; + polling-delay-passive = <250>; + polling-delay = <0>; + trips { + cpu_alert0: cpu-alert-0 { + temperature = <50000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "active"; + }; + cpu_alert1: cpu-alert-1 { + temperature = <60000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "active"; + }; + cpu_alert2: cpu-alert-2 { + temperature = <70000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "active"; + }; + cpu_crit0: cpu-crit-0 { + temperature = <120000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + /* + * Exynos542x supports only 4 trip-points + * so for these polling mode is required. + * Start polling at temperature level of last + * interrupt-driven trip: cpu_alert2 + */ + cpu_alert3: cpu-alert-3 { + temperature = <70000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu_alert4: cpu-alert-4 { + temperature = <85000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + + }; + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&fan0 0 1>; + }; + map1 { + trip = <&cpu_alert1>; + cooling-device = <&fan0 1 2>; + }; + map2 { + trip = <&cpu_alert2>; + cooling-device = <&fan0 2 3>; + }; + /* + * When reaching cpu_alert3, reduce CPU + * by 2 steps. On Exynos5422/5800 that would + * be: 1600 MHz and 1100 MHz. + */ + map3 { + trip = <&cpu_alert3>; + cooling-device = <&cpu0 0 2>; + }; + map4 { + trip = <&cpu_alert3>; + cooling-device = <&cpu4 0 2>; + }; + + /* + * When reaching cpu_alert4, reduce CPU + * further, down to 600 MHz (11 steps for big, + * 7 steps for LITTLE). + */ + map5 { + trip = <&cpu_alert4>; + cooling-device = <&cpu0 3 7>; + }; + map6 { + trip = <&cpu_alert4>; + cooling-device = <&cpu4 3 11>; + }; + }; + }; + }; }; &bus_wcore { @@ -406,10 +495,6 @@ }; }; -&mfc { - memory-region = <&mfc_left>, <&mfc_right>; -}; - &mmc_0 { status = "okay"; mmc-pwrseq = <&emmc_pwrseq>; @@ -487,27 +572,22 @@ &tmu_cpu0 { vtmu-supply = <&ldo7_reg>; - status = "okay"; }; &tmu_cpu1 { vtmu-supply = <&ldo7_reg>; - status = "okay"; }; &tmu_cpu2 { vtmu-supply = <&ldo7_reg>; - status = "okay"; }; &tmu_cpu3 { vtmu-supply = <&ldo7_reg>; - status = "okay"; }; &tmu_gpu { vtmu-supply = <&ldo7_reg>; - status = "okay"; }; &rtc { diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts index 2ae1cf41dcb6..03fa88c45426 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts @@ -14,44 +14,11 @@ /dts-v1/; #include "exynos5422-odroidxu3-common.dtsi" #include "exynos5422-odroidxu3-audio.dtsi" +#include "exynos54xx-odroidxu-leds.dtsi" / { model = "Hardkernel Odroid XU3 Lite"; compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5"; - - pwmleds { - compatible = "pwm-leds"; - - greenled { - label = "green:mmc0"; - pwms = <&pwm 1 2000000 0>; - pwm-names = "pwm1"; - /* - * Green LED is much brighter than the others - * so limit its max brightness - */ - max_brightness = <127>; - linux,default-trigger = "mmc0"; - }; - - blueled { - label = "blue:heartbeat"; - pwms = <&pwm 2 2000000 0>; - pwm-names = "pwm2"; - max_brightness = <255>; - linux,default-trigger = "heartbeat"; - }; - }; - - gpioleds { - compatible = "gpio-leds"; - redled { - label = "red:microSD"; - gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; - default-state = "off"; - linux,default-trigger = "mmc1"; - }; - }; }; &pwm { diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts index 432406db85de..9ed6564acfb0 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -13,44 +13,11 @@ /dts-v1/; #include "exynos5422-odroidxu3-common.dtsi" #include "exynos5422-odroidxu3-audio.dtsi" +#include "exynos54xx-odroidxu-leds.dtsi" / { model = "Hardkernel Odroid XU3"; compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5"; - - pwmleds { - compatible = "pwm-leds"; - - greenled { - label = "green:mmc0"; - pwms = <&pwm 1 2000000 0>; - pwm-names = "pwm1"; - /* - * Green LED is much brighter than the others - * so limit its max brightness - */ - max_brightness = <127>; - linux,default-trigger = "mmc0"; - }; - - blueled { - label = "blue:heartbeat"; - pwms = <&pwm 2 2000000 0>; - pwm-names = "pwm2"; - max_brightness = <255>; - linux,default-trigger = "heartbeat"; - }; - }; - - gpioleds { - compatible = "gpio-leds"; - redled { - label = "red:microSD"; - gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; - default-state = "off"; - linux,default-trigger = "mmc1"; - }; - }; }; &i2c_0 { diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi new file mode 100644 index 000000000000..0ed30206625c --- /dev/null +++ b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi @@ -0,0 +1,50 @@ +/* + * Hardkernel Odroid XU/XU3 LED device tree source + * + * Copyright (c) 2015,2016 Krzysztof Kozlowski + * Copyright (c) 2014 Collabora Ltd. + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <dt-bindings/gpio/gpio.h> + +/ { + pwmleds { + compatible = "pwm-leds"; + + greenled { + label = "green:mmc0"; + pwms = <&pwm 1 2000000 0>; + pwm-names = "pwm1"; + /* + * Green LED is much brighter than the others + * so limit its max brightness + */ + max_brightness = <127>; + linux,default-trigger = "mmc0"; + }; + + blueled { + label = "blue:heartbeat"; + pwms = <&pwm 2 2000000 0>; + pwm-names = "pwm2"; + max_brightness = <255>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpioleds { + compatible = "gpio-leds"; + redled { + label = "red:microSD"; + gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc1"; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi new file mode 100644 index 000000000000..06a604911e87 --- /dev/null +++ b/arch/arm/boot/dts/exynos54xx.dtsi @@ -0,0 +1,199 @@ +/* + * Samsung's Exynos54xx SoC series common device tree source + * + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2016 Krzysztof Kozlowski + * + * Device nodes common for Samsung Exynos5410/5420/5422/5800. Specific + * Exynos 54xx SoCs should include this file and customize it further + * (e.g. with clocks). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "skeleton.dtsi" +#include "exynos5.dtsi" + +/ { + compatible = "samsung,exynos5"; + + aliases { + i2c4 = &hsi2c_4; + i2c5 = &hsi2c_5; + i2c6 = &hsi2c_6; + i2c7 = &hsi2c_7; + usbdrdphy0 = &usbdrd_phy0; + usbdrdphy1 = &usbdrd_phy1; + }; + + soc: soc { + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x54000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x54000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@53000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x53000 0x1000>; + }; + }; + + mct: mct@101c0000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x101c0000 0xb00>; + interrupt-parent = <&mct_map>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, + <8>, <9>, <10>, <11>; + + mct_map: mct-map { + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &combiner 23 3>, + <1 &combiner 23 4>, + <2 &combiner 25 2>, + <3 &combiner 25 3>, + <4 &gic 0 120 0>, + <5 &gic 0 121 0>, + <6 &gic 0 122 0>, + <7 &gic 0 123 0>, + <8 &gic 0 128 0>, + <9 &gic 0 129 0>, + <10 &gic 0 130 0>, + <11 &gic 0 131 0>; + }; + }; + + watchdog: watchdog@101d0000 { + compatible = "samsung,exynos5420-wdt"; + reg = <0x101d0000 0x100>; + interrupts = <0 42 0>; + }; + + sss: sss@10830000 { + compatible = "samsung,exynos4210-secss"; + reg = <0x10830000 0x300>; + interrupts = <0 112 0>; + }; + + /* i2c_0-3 are defined in exynos5.dtsi */ + hsi2c_4: i2c@12ca0000 { + compatible = "samsung,exynos5250-hsi2c"; + reg = <0x12ca0000 0x1000>; + interrupts = <0 60 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_5: i2c@12cb0000 { + compatible = "samsung,exynos5250-hsi2c"; + reg = <0x12cb0000 0x1000>; + interrupts = <0 61 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_6: i2c@12cc0000 { + compatible = "samsung,exynos5250-hsi2c"; + reg = <0x12cc0000 0x1000>; + interrupts = <0 62 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_7: i2c@12cd0000 { + compatible = "samsung,exynos5250-hsi2c"; + reg = <0x12cd0000 0x1000>; + interrupts = <0 63 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usbdrd3_0: usb3-0 { + compatible = "samsung,exynos5250-dwusb3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbdrd_dwc3_0: dwc3@12000000 { + compatible = "snps,dwc3"; + reg = <0x12000000 0x10000>; + interrupts = <0 72 0>; + phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usbdrd_phy0: phy@12100000 { + compatible = "samsung,exynos5420-usbdrd-phy"; + reg = <0x12100000 0x100>; + #phy-cells = <1>; + }; + + usbdrd3_1: usb3-1 { + compatible = "samsung,exynos5250-dwusb3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbdrd_dwc3_1: dwc3@12400000 { + compatible = "snps,dwc3"; + reg = <0x12400000 0x10000>; + phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usbdrd_phy1: phy@12500000 { + compatible = "samsung,exynos5420-usbdrd-phy"; + reg = <0x12500000 0x100>; + #phy-cells = <1>; + }; + + usbhost2: usb@12110000 { + compatible = "samsung,exynos4210-ehci"; + reg = <0x12110000 0x100>; + interrupts = <0 71 0>; + + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&usb2_phy 1>; + }; + }; + + usbhost1: usb@12120000 { + compatible = "samsung,exynos4210-ohci"; + reg = <0x12120000 0x100>; + interrupts = <0 71 0>; + + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&usb2_phy 1>; + }; + }; + + usb2_phy: phy@12130000 { + compatible = "samsung,exynos5250-usb2-phy"; + reg = <0x12130000 0x100>; + #phy-cells = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 1f735963ca98..5ec71e2400fd 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -279,7 +279,6 @@ regulator-name = "vdd_1v2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; @@ -302,7 +301,6 @@ regulator-name = "vdd_1v35"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; - regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; @@ -324,7 +322,6 @@ regulator-name = "vdd_2v"; regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; - regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; @@ -335,7 +332,6 @@ regulator-name = "vdd_1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; @@ -420,7 +416,6 @@ regulator-name = "vdd_ldo9"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-always-on; regulator-state-mem { regulator-on-in-suspend; regulator-mode = <MAX77802_OPMODE_LP>; @@ -431,7 +426,6 @@ regulator-name = "vdd_ldo10"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; @@ -670,10 +664,6 @@ status = "okay"; }; -&mfc { - memory-region = <&mfc_left>, <&mfc_right>; -}; - &mmc_0 { status = "okay"; num-slots = <1>; @@ -1022,6 +1012,26 @@ status = "okay"; }; +&tmu_cpu0 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu1 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu2 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu3 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_gpu { + vtmu-supply = <&ldo10_reg>; +}; + &usbdrd_dwc3_0 { dr_mode = "host"; }; diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi index 0d0e62489d93..4aee5cc75fa4 100644 --- a/arch/arm/boot/dts/ge863-pro3.dtsi +++ b/arch/arm/boot/dts/ge863-pro3.dtsi @@ -11,15 +11,6 @@ / { clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <6000000>; - }; - main_xtal { clock-frequency = <6000000>; }; diff --git a/arch/arm/boot/dts/hi3519-demb.dts b/arch/arm/boot/dts/hi3519-demb.dts new file mode 100644 index 000000000000..6991ab694c9c --- /dev/null +++ b/arch/arm/boot/dts/hi3519-demb.dts @@ -0,0 +1,42 @@ +/* + * Copyright (c) 2015 HiSilicon Technologies Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +/dts-v1/; +#include "hi3519.dtsi" + +/ { + model = "HiSilicon HI3519 DEMO Board"; + compatible = "hisilicon,hi3519"; + + aliases { + serial0 = &uart0; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&dual_timer0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/hi3519.dtsi b/arch/arm/boot/dts/hi3519.dtsi new file mode 100644 index 000000000000..5729ecfcdc8b --- /dev/null +++ b/arch/arm/boot/dts/hi3519.dtsi @@ -0,0 +1,187 @@ +/* + * Copyright (c) 2015 HiSilicon Technologies Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +#include <dt-bindings/clock/hi3519-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +/ { + #address-cells = <1>; + #size-cells = <1>; + chosen { }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0>; + }; + }; + + gic: interrupt-controller@10300000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10301000 0x1000>, <0x10302000 0x1000>; + }; + + clk_3m: clk_3m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <3000000>; + }; + + crg: clock-reset-controller@12010000 { + compatible = "hisilicon,hi3519-crg"; + #clock-cells = <1>; + #reset-cells = <2>; + reg = <0x12010000 0x10000>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + uart0: serial@12100000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12100000 0x1000>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HI3519_UART0_CLK>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + uart1: serial@12101000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12101000 0x1000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HI3519_UART1_CLK>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + uart2: serial@12102000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12102000 0x1000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HI3519_UART2_CLK>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + uart3: serial@12103000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12103000 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HI3519_UART3_CLK>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + uart4: serial@12104000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12104000 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HI3519_UART4_CLK>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + dual_timer0: timer@12000000 { + compatible = "arm,sp804", "arm,primecell"; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x12000000 0x1000>; + clocks = <&clk_3m>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + dual_timer1: timer@12001000 { + compatible = "arm,sp804", "arm,primecell"; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x12001000 0x1000>; + clocks = <&clk_3m>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + dual_timer2: timer@12002000 { + compatible = "arm,sp804", "arm,primecell"; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x12002000 0x1000>; + clocks = <&clk_3m>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + spi_bus0: spi@12120000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x12120000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HI3519_SPI0_CLK>; + clock-names = "apb_pclk"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; + }; + + spi_bus1: spi@12121000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x12121000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HI3519_SPI1_CLK>; + clock-names = "apb_pclk"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; + }; + + spi_bus2: spi@12122000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x12122000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HI3519_SPI2_CLK>; + clock-names = "apb_pclk"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; + }; + + sysctrl: system-controller@12020000 { + compatible = "hisilicon,hi3519-sysctrl", "syscon"; + reg = <0x12020000 0x1000>; + }; + + reboot { + compatible = "syscon-reboot"; + regmap = <&sysctrl>; + offset = <0x4>; + mask = <0xdeadbeef>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/imx1-ads.dts index af4eee5794aa..f50498659cc3 100644 --- a/arch/arm/boot/dts/imx1-ads.dts +++ b/arch/arm/boot/dts/imx1-ads.dts @@ -66,14 +66,14 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx1-apf9328.dts b/arch/arm/boot/dts/imx1-apf9328.dts index 07d92fb40e6f..e8b4b52c2418 100644 --- a/arch/arm/boot/dts/imx1-apf9328.dts +++ b/arch/arm/boot/dts/imx1-apf9328.dts @@ -34,14 +34,14 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx23-sansa.dts b/arch/arm/boot/dts/imx23-sansa.dts new file mode 100644 index 000000000000..4ec32f4c7885 --- /dev/null +++ b/arch/arm/boot/dts/imx23-sansa.dts @@ -0,0 +1,207 @@ +/* + * Copyright (C) 2013-2016 Marek Vasut <marek.vasut@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + */ + +/dts-v1/; +#include "imx23.dtsi" + +/ { + model = "SanDisk Sansa Fuze+"; + compatible = "sandisk,sansa_fuze_plus", "fsl,imx23"; + + memory { + reg = <0x40000000 0x04000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx23-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; + bus-width = <4>; + vmmc-supply = <®_vddio_sd0>; + cd-inverted; + status = "okay"; + }; + + ssp1: ssp@80034000 { + compatible = "fsl,imx23-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_8bit_pins_a>; + bus-width = <8>; + vmmc-supply = <®_vddio_sd1>; + non-removable; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_GPMI_D08__GPIO_0_8 + MX23_PAD_PWM3__GPIO_1_29 + MX23_PAD_AUART1_RTS__GPIO_0_27 + MX23_PAD_AUART1_CTS__GPIO_0_26 + MX23_PAD_I2C_SCL__I2C_SCL + MX23_PAD_I2C_SDA__I2C_SDA + MX23_PAD_LCD_DOTCK__GPIO_1_22 + MX23_PAD_LCD_HSYNC__GPIO_1_24 + MX23_PAD_PWM3__GPIO_1_29 + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + }; + + apbx@80040000 { + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins_a>; + status = "okay"; + }; + + duart: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + + lradc@80050000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb0: usb@80080000 { + dr_mode = "peripheral"; + status = "okay"; + }; + }; + + reg_vddio_sd0: regulator-vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio0 8 0>; + }; + + reg_vddio_sd1: regulator-vddio-sd1 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 29 0>; + }; + + reg_vdd_touchpad: regulator-vdd-touchpad0 { + compatible = "regulator-fixed"; + regulator-name = "vdd-touchpad0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio0 26 0>; + regulator-always-on; + enable-active-low; + }; + + reg_vdd_tuner: regulator-vdd-tuner0 { + compatible = "regulator-fixed"; + regulator-name = "vdd-tuner0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio0 29 0>; + regulator-always-on; + enable-active-low; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 2 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + i2c-0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + gpios = < + &gpio1 24 0 /* SDA */ + &gpio1 22 0 /* SCL */ + >; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + }; + + i2c-1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + gpios = < + &gpio0 31 0 /* SDA */ + &gpio0 30 0 /* SCL */ + >; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + + touch: touch@20 { + compatible = "synaptics,synaptics_i2c"; + reg = <0x20>; + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + }; + +}; diff --git a/arch/arm/boot/dts/imx23-xfi3.dts b/arch/arm/boot/dts/imx23-xfi3.dts new file mode 100644 index 000000000000..025cf949662d --- /dev/null +++ b/arch/arm/boot/dts/imx23-xfi3.dts @@ -0,0 +1,179 @@ +/* + * Copyright (C) 2013-2016 Marek Vasut <marek.vasut@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + */ + +/dts-v1/; +#include "imx23.dtsi" + +/ { + model = "Creative ZEN X-Fi3"; + compatible = "creative,x-fi3", "fsl,imx23"; + + memory { + reg = <0x40000000 0x04000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx23-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; + bus-width = <4>; + vmmc-supply = <®_vddio_sd0>; + cd-inverted; + status = "okay"; + }; + + ssp1: ssp@80034000 { + compatible = "fsl,imx23-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_4bit_pins_a>; + bus-width = <4>; + non-removable; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_GPMI_D07__GPIO_0_7 + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + key_pins_a: keys@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_ROTARYA__GPIO_2_7 + MX23_PAD_ROTARYB__GPIO_2_8 + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + }; + }; + + apbx@80040000 { + i2c: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_a>; + status = "okay"; + }; + + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins_a>; + status = "okay"; + }; + + duart: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + + auart1: serial@8006e000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_2pins_a>; + status = "okay"; + }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + + lradc@80050000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb0: usb@80080000 { + dr_mode = "peripheral"; + status = "okay"; + }; + }; + + reg_vddio_sd0: regulator-vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio0 7 0>; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 2 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key_pins_a>; + + voldown { + label = "volume-down"; + linux,code = <114>; + gpios = <&gpio2 7 0>; + debounce-interval = <20>; + }; + + volup { + label = "volume-up"; + linux,code = <115>; + gpios = <&gpio2 8 0>; + debounce-interval = <20>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 302d1168f424..440ee9a4a158 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -111,6 +111,7 @@ gpio0: gpio@0 { compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; + reg = <0>; interrupts = <16>; gpio-controller; #gpio-cells = <2>; @@ -120,6 +121,7 @@ gpio1: gpio@1 { compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; + reg = <1>; interrupts = <17>; gpio-controller; #gpio-cells = <2>; @@ -129,6 +131,7 @@ gpio2: gpio@2 { compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; + reg = <2>; interrupts = <18>; gpio-controller; #gpio-cells = <2>; @@ -171,6 +174,17 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + auart1_2pins_a: auart1-2pins@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_GPMI_D14__AUART2_RX + MX23_PAD_GPMI_D15__AUART2_TX + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + gpmi_pins_a: gpmi-nand@0 { reg = <0>; fsl,pinmux-ids = < @@ -249,6 +263,40 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + mmc1_4bit_pins_a: mmc1-4bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_GPMI_D00__SSP2_DATA0 + MX23_PAD_GPMI_D01__SSP2_DATA1 + MX23_PAD_GPMI_D02__SSP2_DATA2 + MX23_PAD_GPMI_D03__SSP2_DATA3 + MX23_PAD_GPMI_RDY1__SSP2_CMD + MX23_PAD_GPMI_WRN__SSP2_SCK + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + mmc1_8bit_pins_a: mmc1-8bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_GPMI_D00__SSP2_DATA0 + MX23_PAD_GPMI_D01__SSP2_DATA1 + MX23_PAD_GPMI_D02__SSP2_DATA2 + MX23_PAD_GPMI_D03__SSP2_DATA3 + MX23_PAD_GPMI_D04__SSP2_DATA4 + MX23_PAD_GPMI_D05__SSP2_DATA5 + MX23_PAD_GPMI_D06__SSP2_DATA6 + MX23_PAD_GPMI_D07__SSP2_DATA7 + MX23_PAD_GPMI_RDY1__SSP2_CMD + MX23_PAD_GPMI_WRN__SSP2_SCK + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + pwm2_pins_a: pwm2@0 { reg = <0>; fsl,pinmux-ids = < diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts index cda6907a27b9..9300711f1ea3 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts @@ -161,14 +161,14 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index 9351296356dc..70292101ba03 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -298,7 +298,7 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h index f96fa2df8f11..f840f03ad171 100644 --- a/arch/arm/boot/dts/imx25-pinfunc.h +++ b/arch/arm/boot/dts/imx25-pinfunc.h @@ -26,77 +26,77 @@ #define MX25_PAD_A13__GPIO_4_1 0x00c 0x22C 0x000 0x05 0x000 #define MX25_PAD_A13__LCDC_CLS 0x00c 0x22C 0x000 0x07 0x000 -#define MX25_PAD_A14__A14 0x010 0x230 0x000 0x10 0x000 -#define MX25_PAD_A14__GPIO_2_0 0x010 0x230 0x000 0x15 0x000 -#define MX25_PAD_A14__SIM1_CLK1 0x010 0x230 0x000 0x16 0x000 -#define MX25_PAD_A14__LCDC_SPL 0x010 0x230 0x000 0x17 0x000 - -#define MX25_PAD_A15__A15 0x014 0x234 0x000 0x10 0x000 -#define MX25_PAD_A15__GPIO_2_1 0x014 0x234 0x000 0x15 0x000 -#define MX25_PAD_A15__SIM1_RST1 0x014 0x234 0x000 0x16 0x000 -#define MX25_PAD_A15__LCDC_PS 0x014 0x234 0x000 0x17 0x000 - -#define MX25_PAD_A16__A16 0x018 0x000 0x000 0x10 0x000 -#define MX25_PAD_A16__GPIO_2_2 0x018 0x000 0x000 0x15 0x000 -#define MX25_PAD_A16__SIM1_VEN1 0x018 0x000 0x000 0x16 0x000 -#define MX25_PAD_A16__LCDC_REV 0x018 0x000 0x000 0x17 0x000 - -#define MX25_PAD_A17__A17 0x01c 0x238 0x000 0x10 0x000 -#define MX25_PAD_A17__GPIO_2_3 0x01c 0x238 0x000 0x15 0x000 -#define MX25_PAD_A17__SIM1_TX 0x01c 0x238 0x554 0x16 0x000 -#define MX25_PAD_A17__FEC_TX_ERR 0x01c 0x238 0x000 0x17 0x000 - -#define MX25_PAD_A18__A18 0x020 0x23c 0x000 0x10 0x000 -#define MX25_PAD_A18__GPIO_2_4 0x020 0x23c 0x000 0x15 0x000 -#define MX25_PAD_A18__SIM1_PD1 0x020 0x23c 0x550 0x16 0x000 -#define MX25_PAD_A18__FEC_COL 0x020 0x23c 0x504 0x17 0x000 - -#define MX25_PAD_A19__A19 0x024 0x240 0x000 0x10 0x000 -#define MX25_PAD_A19__GPIO_2_5 0x024 0x240 0x000 0x15 0x000 -#define MX25_PAD_A19__SIM1_RX1 0x024 0x240 0x54c 0x16 0x000 -#define MX25_PAD_A19__FEC_RX_ERR 0x024 0x240 0x518 0x17 0x000 - -#define MX25_PAD_A20__A20 0x028 0x244 0x000 0x10 0x000 -#define MX25_PAD_A20__GPIO_2_6 0x028 0x244 0x000 0x15 0x000 -#define MX25_PAD_A20__SIM2_CLK1 0x028 0x244 0x000 0x16 0x000 -#define MX25_PAD_A20__FEC_RDATA2 0x028 0x244 0x50c 0x17 0x000 - -#define MX25_PAD_A21__A21 0x02c 0x248 0x000 0x10 0x000 -#define MX25_PAD_A21__GPIO_2_7 0x02c 0x248 0x000 0x15 0x000 -#define MX25_PAD_A21__SIM2_RST1 0x02c 0x248 0x000 0x16 0x000 -#define MX25_PAD_A21__FEC_RDATA3 0x02c 0x248 0x510 0x17 0x000 - -#define MX25_PAD_A22__A22 0x030 0x000 0x000 0x10 0x000 -#define MX25_PAD_A22__GPIO_2_8 0x030 0x000 0x000 0x15 0x000 -#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x17 0x000 -#define MX25_PAD_A22__SIM2_VEN1 0x030 0x000 0x000 0x16 0x000 -#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x17 0x000 - -#define MX25_PAD_A23__A23 0x034 0x24c 0x000 0x10 0x000 -#define MX25_PAD_A23__GPIO_2_9 0x034 0x24c 0x000 0x15 0x000 -#define MX25_PAD_A23__SIM2_TX1 0x034 0x24c 0x560 0x16 0x000 -#define MX25_PAD_A23__FEC_TDATA3 0x034 0x24c 0x000 0x17 0x000 - -#define MX25_PAD_A24__A24 0x038 0x250 0x000 0x10 0x000 -#define MX25_PAD_A24__GPIO_2_10 0x038 0x250 0x000 0x15 0x000 -#define MX25_PAD_A24__SIM2_PD1 0x038 0x250 0x55c 0x16 0x000 -#define MX25_PAD_A24__FEC_RX_CLK 0x038 0x250 0x514 0x17 0x000 - -#define MX25_PAD_A25__A25 0x03c 0x254 0x000 0x10 0x000 -#define MX25_PAD_A25__GPIO_2_11 0x03c 0x254 0x000 0x15 0x000 -#define MX25_PAD_A25__FEC_CRS 0x03c 0x254 0x508 0x17 0x000 - -#define MX25_PAD_EB0__EB0 0x040 0x258 0x000 0x10 0x000 -#define MX25_PAD_EB0__AUD4_TXD 0x040 0x258 0x464 0x14 0x000 -#define MX25_PAD_EB0__GPIO_2_12 0x040 0x258 0x000 0x15 0x000 - -#define MX25_PAD_EB1__EB1 0x044 0x25c 0x000 0x10 0x000 -#define MX25_PAD_EB1__AUD4_RXD 0x044 0x25c 0x460 0x14 0x000 -#define MX25_PAD_EB1__GPIO_2_13 0x044 0x25c 0x000 0x15 0x000 - -#define MX25_PAD_OE__OE 0x048 0x260 0x000 0x10 0x000 -#define MX25_PAD_OE__AUD4_TXC 0x048 0x260 0x000 0x14 0x000 -#define MX25_PAD_OE__GPIO_2_14 0x048 0x260 0x000 0x15 0x000 +#define MX25_PAD_A14__A14 0x010 0x230 0x000 0x00 0x000 +#define MX25_PAD_A14__GPIO_2_0 0x010 0x230 0x000 0x05 0x000 +#define MX25_PAD_A14__SIM1_CLK1 0x010 0x230 0x000 0x06 0x000 +#define MX25_PAD_A14__LCDC_SPL 0x010 0x230 0x000 0x07 0x000 + +#define MX25_PAD_A15__A15 0x014 0x234 0x000 0x00 0x000 +#define MX25_PAD_A15__GPIO_2_1 0x014 0x234 0x000 0x05 0x000 +#define MX25_PAD_A15__SIM1_RST1 0x014 0x234 0x000 0x06 0x000 +#define MX25_PAD_A15__LCDC_PS 0x014 0x234 0x000 0x07 0x000 + +#define MX25_PAD_A16__A16 0x018 0x000 0x000 0x00 0x000 +#define MX25_PAD_A16__GPIO_2_2 0x018 0x000 0x000 0x05 0x000 +#define MX25_PAD_A16__SIM1_VEN1 0x018 0x000 0x000 0x06 0x000 +#define MX25_PAD_A16__LCDC_REV 0x018 0x000 0x000 0x07 0x000 + +#define MX25_PAD_A17__A17 0x01c 0x238 0x000 0x00 0x000 +#define MX25_PAD_A17__GPIO_2_3 0x01c 0x238 0x000 0x05 0x000 +#define MX25_PAD_A17__SIM1_TX 0x01c 0x238 0x554 0x06 0x000 +#define MX25_PAD_A17__FEC_TX_ERR 0x01c 0x238 0x000 0x07 0x000 + +#define MX25_PAD_A18__A18 0x020 0x23c 0x000 0x00 0x000 +#define MX25_PAD_A18__GPIO_2_4 0x020 0x23c 0x000 0x05 0x000 +#define MX25_PAD_A18__SIM1_PD1 0x020 0x23c 0x550 0x06 0x000 +#define MX25_PAD_A18__FEC_COL 0x020 0x23c 0x504 0x07 0x000 + +#define MX25_PAD_A19__A19 0x024 0x240 0x000 0x00 0x000 +#define MX25_PAD_A19__GPIO_2_5 0x024 0x240 0x000 0x05 0x000 +#define MX25_PAD_A19__SIM1_RX1 0x024 0x240 0x54c 0x06 0x000 +#define MX25_PAD_A19__FEC_RX_ERR 0x024 0x240 0x518 0x07 0x000 + +#define MX25_PAD_A20__A20 0x028 0x244 0x000 0x00 0x000 +#define MX25_PAD_A20__GPIO_2_6 0x028 0x244 0x000 0x05 0x000 +#define MX25_PAD_A20__SIM2_CLK1 0x028 0x244 0x000 0x06 0x000 +#define MX25_PAD_A20__FEC_RDATA2 0x028 0x244 0x50c 0x07 0x000 + +#define MX25_PAD_A21__A21 0x02c 0x248 0x000 0x00 0x000 +#define MX25_PAD_A21__GPIO_2_7 0x02c 0x248 0x000 0x05 0x000 +#define MX25_PAD_A21__SIM2_RST1 0x02c 0x248 0x000 0x06 0x000 +#define MX25_PAD_A21__FEC_RDATA3 0x02c 0x248 0x510 0x07 0x000 + +#define MX25_PAD_A22__A22 0x030 0x000 0x000 0x00 0x000 +#define MX25_PAD_A22__GPIO_2_8 0x030 0x000 0x000 0x05 0x000 +#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x07 0x000 +#define MX25_PAD_A22__SIM2_VEN1 0x030 0x000 0x000 0x06 0x000 +#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x07 0x000 + +#define MX25_PAD_A23__A23 0x034 0x24c 0x000 0x00 0x000 +#define MX25_PAD_A23__GPIO_2_9 0x034 0x24c 0x000 0x05 0x000 +#define MX25_PAD_A23__SIM2_TX1 0x034 0x24c 0x560 0x06 0x000 +#define MX25_PAD_A23__FEC_TDATA3 0x034 0x24c 0x000 0x07 0x000 + +#define MX25_PAD_A24__A24 0x038 0x250 0x000 0x00 0x000 +#define MX25_PAD_A24__GPIO_2_10 0x038 0x250 0x000 0x05 0x000 +#define MX25_PAD_A24__SIM2_PD1 0x038 0x250 0x55c 0x06 0x000 +#define MX25_PAD_A24__FEC_RX_CLK 0x038 0x250 0x514 0x07 0x000 + +#define MX25_PAD_A25__A25 0x03c 0x254 0x000 0x00 0x000 +#define MX25_PAD_A25__GPIO_2_11 0x03c 0x254 0x000 0x05 0x000 +#define MX25_PAD_A25__FEC_CRS 0x03c 0x254 0x508 0x07 0x000 + +#define MX25_PAD_EB0__EB0 0x040 0x258 0x000 0x00 0x000 +#define MX25_PAD_EB0__AUD4_TXD 0x040 0x258 0x464 0x04 0x000 +#define MX25_PAD_EB0__GPIO_2_12 0x040 0x258 0x000 0x05 0x000 + +#define MX25_PAD_EB1__EB1 0x044 0x25c 0x000 0x00 0x000 +#define MX25_PAD_EB1__AUD4_RXD 0x044 0x25c 0x460 0x04 0x000 +#define MX25_PAD_EB1__GPIO_2_13 0x044 0x25c 0x000 0x05 0x000 + +#define MX25_PAD_OE__OE 0x048 0x260 0x000 0x00 0x000 +#define MX25_PAD_OE__AUD4_TXC 0x048 0x260 0x000 0x04 0x000 +#define MX25_PAD_OE__GPIO_2_14 0x048 0x260 0x000 0x05 0x000 #define MX25_PAD_CS0__CS0 0x04c 0x000 0x000 0x00 0x000 #define MX25_PAD_CS0__GPIO_4_2 0x04c 0x000 0x000 0x05 0x000 @@ -105,51 +105,51 @@ #define MX25_PAD_CS1__NF_CE3 0x050 0x000 0x000 0x01 0x000 #define MX25_PAD_CS1__GPIO_4_3 0x050 0x000 0x000 0x05 0x000 -#define MX25_PAD_CS4__CS4 0x054 0x264 0x000 0x10 0x000 +#define MX25_PAD_CS4__CS4 0x054 0x264 0x000 0x00 0x000 #define MX25_PAD_CS4__NF_CE1 0x054 0x264 0x000 0x01 0x000 -#define MX25_PAD_CS4__UART5_CTS 0x054 0x264 0x000 0x13 0x000 -#define MX25_PAD_CS4__GPIO_3_20 0x054 0x264 0x000 0x15 0x000 +#define MX25_PAD_CS4__UART5_CTS 0x054 0x264 0x000 0x03 0x000 +#define MX25_PAD_CS4__GPIO_3_20 0x054 0x264 0x000 0x05 0x000 #define MX25_PAD_CS5__CS5 0x058 0x268 0x000 0x00 0x000 #define MX25_PAD_CS5__NF_CE2 0x058 0x268 0x000 0x01 0x000 #define MX25_PAD_CS5__UART5_RTS 0x058 0x268 0x574 0x03 0x000 #define MX25_PAD_CS5__GPIO_3_21 0x058 0x268 0x000 0x05 0x000 -#define MX25_PAD_NF_CE0__NF_CE0 0x05c 0x26c 0x000 0x10 0x000 -#define MX25_PAD_NF_CE0__GPIO_3_22 0x05c 0x26c 0x000 0x15 0x000 +#define MX25_PAD_NF_CE0__NF_CE0 0x05c 0x26c 0x000 0x00 0x000 +#define MX25_PAD_NF_CE0__GPIO_3_22 0x05c 0x26c 0x000 0x05 0x000 -#define MX25_PAD_ECB__ECB 0x060 0x270 0x000 0x10 0x000 -#define MX25_PAD_ECB__UART5_TXD 0x060 0x270 0x000 0x13 0x000 -#define MX25_PAD_ECB__GPIO_3_23 0x060 0x270 0x000 0x15 0x000 +#define MX25_PAD_ECB__ECB 0x060 0x270 0x000 0x00 0x000 +#define MX25_PAD_ECB__UART5_TXD 0x060 0x270 0x000 0x03 0x000 +#define MX25_PAD_ECB__GPIO_3_23 0x060 0x270 0x000 0x05 0x000 -#define MX25_PAD_LBA__LBA 0x064 0x274 0x000 0x10 0x000 -#define MX25_PAD_LBA__UART5_RXD 0x064 0x274 0x578 0x13 0x000 -#define MX25_PAD_LBA__GPIO_3_24 0x064 0x274 0x000 0x15 0x000 +#define MX25_PAD_LBA__LBA 0x064 0x274 0x000 0x00 0x000 +#define MX25_PAD_LBA__UART5_RXD 0x064 0x274 0x578 0x03 0x000 +#define MX25_PAD_LBA__GPIO_3_24 0x064 0x274 0x000 0x05 0x000 #define MX25_PAD_BCLK__BCLK 0x068 0x000 0x000 0x00 0x000 #define MX25_PAD_BCLK__GPIO_4_4 0x068 0x000 0x000 0x05 0x000 -#define MX25_PAD_RW__RW 0x06c 0x278 0x000 0x10 0x000 -#define MX25_PAD_RW__AUD4_TXFS 0x06c 0x278 0x474 0x14 0x000 -#define MX25_PAD_RW__GPIO_3_25 0x06c 0x278 0x000 0x15 0x000 +#define MX25_PAD_RW__RW 0x06c 0x278 0x000 0x00 0x000 +#define MX25_PAD_RW__AUD4_TXFS 0x06c 0x278 0x474 0x04 0x000 +#define MX25_PAD_RW__GPIO_3_25 0x06c 0x278 0x000 0x05 0x000 -#define MX25_PAD_NFWE_B__NFWE_B 0x070 0x000 0x000 0x10 0x000 -#define MX25_PAD_NFWE_B__GPIO_3_26 0x070 0x000 0x000 0x15 0x000 +#define MX25_PAD_NFWE_B__NFWE_B 0x070 0x000 0x000 0x00 0x000 +#define MX25_PAD_NFWE_B__GPIO_3_26 0x070 0x000 0x000 0x05 0x000 -#define MX25_PAD_NFRE_B__NFRE_B 0x074 0x000 0x000 0x10 0x000 -#define MX25_PAD_NFRE_B__GPIO_3_27 0x074 0x000 0x000 0x15 0x000 +#define MX25_PAD_NFRE_B__NFRE_B 0x074 0x000 0x000 0x00 0x000 +#define MX25_PAD_NFRE_B__GPIO_3_27 0x074 0x000 0x000 0x05 0x000 -#define MX25_PAD_NFALE__NFALE 0x078 0x000 0x000 0x10 0x000 -#define MX25_PAD_NFALE__GPIO_3_28 0x078 0x000 0x000 0x15 0x000 +#define MX25_PAD_NFALE__NFALE 0x078 0x000 0x000 0x00 0x000 +#define MX25_PAD_NFALE__GPIO_3_28 0x078 0x000 0x000 0x05 0x000 -#define MX25_PAD_NFCLE__NFCLE 0x07c 0x000 0x000 0x10 0x000 -#define MX25_PAD_NFCLE__GPIO_3_29 0x07c 0x000 0x000 0x15 0x000 +#define MX25_PAD_NFCLE__NFCLE 0x07c 0x000 0x000 0x00 0x000 +#define MX25_PAD_NFCLE__GPIO_3_29 0x07c 0x000 0x000 0x05 0x000 -#define MX25_PAD_NFWP_B__NFWP_B 0x080 0x000 0x000 0x10 0x000 -#define MX25_PAD_NFWP_B__GPIO_3_30 0x080 0x000 0x000 0x15 0x000 +#define MX25_PAD_NFWP_B__NFWP_B 0x080 0x000 0x000 0x00 0x000 +#define MX25_PAD_NFWP_B__GPIO_3_30 0x080 0x000 0x000 0x05 0x000 -#define MX25_PAD_NFRB__NFRB 0x084 0x27c 0x000 0x10 0x000 -#define MX25_PAD_NFRB__GPIO_3_31 0x084 0x27c 0x000 0x15 0x000 +#define MX25_PAD_NFRB__NFRB 0x084 0x27c 0x000 0x00 0x000 +#define MX25_PAD_NFRB__GPIO_3_31 0x084 0x27c 0x000 0x05 0x000 #define MX25_PAD_D15__D15 0x088 0x280 0x000 0x00 0x000 #define MX25_PAD_D15__LD16 0x088 0x280 0x000 0x01 0x000 @@ -210,101 +210,101 @@ #define MX25_PAD_D0__D0 0x0c4 0x2bc 0x000 0x00 0x000 #define MX25_PAD_D0__GPIO_4_20 0x0c4 0x2bc 0x000 0x05 0x000 -#define MX25_PAD_LD0__LD0 0x0c8 0x2c0 0x000 0x10 0x000 -#define MX25_PAD_LD0__CSI_D0 0x0c8 0x2c0 0x488 0x12 0x000 -#define MX25_PAD_LD0__GPIO_2_15 0x0c8 0x2c0 0x000 0x15 0x000 +#define MX25_PAD_LD0__LD0 0x0c8 0x2c0 0x000 0x00 0x000 +#define MX25_PAD_LD0__CSI_D0 0x0c8 0x2c0 0x488 0x02 0x000 +#define MX25_PAD_LD0__GPIO_2_15 0x0c8 0x2c0 0x000 0x05 0x000 -#define MX25_PAD_LD1__LD1 0x0cc 0x2c4 0x000 0x10 0x000 -#define MX25_PAD_LD1__CSI_D1 0x0cc 0x2c4 0x48c 0x12 0x000 -#define MX25_PAD_LD1__GPIO_2_16 0x0cc 0x2c4 0x000 0x15 0x000 +#define MX25_PAD_LD1__LD1 0x0cc 0x2c4 0x000 0x00 0x000 +#define MX25_PAD_LD1__CSI_D1 0x0cc 0x2c4 0x48c 0x02 0x000 +#define MX25_PAD_LD1__GPIO_2_16 0x0cc 0x2c4 0x000 0x05 0x000 -#define MX25_PAD_LD2__LD2 0x0d0 0x2c8 0x000 0x10 0x000 -#define MX25_PAD_LD2__GPIO_2_17 0x0d0 0x2c8 0x000 0x15 0x000 +#define MX25_PAD_LD2__LD2 0x0d0 0x2c8 0x000 0x00 0x000 +#define MX25_PAD_LD2__GPIO_2_17 0x0d0 0x2c8 0x000 0x05 0x000 -#define MX25_PAD_LD3__LD3 0x0d4 0x2cc 0x000 0x10 0x000 -#define MX25_PAD_LD3__GPIO_2_18 0x0d4 0x2cc 0x000 0x15 0x000 +#define MX25_PAD_LD3__LD3 0x0d4 0x2cc 0x000 0x00 0x000 +#define MX25_PAD_LD3__GPIO_2_18 0x0d4 0x2cc 0x000 0x05 0x000 -#define MX25_PAD_LD4__LD4 0x0d8 0x2d0 0x000 0x10 0x000 -#define MX25_PAD_LD4__GPIO_2_19 0x0d8 0x2d0 0x000 0x15 0x000 +#define MX25_PAD_LD4__LD4 0x0d8 0x2d0 0x000 0x00 0x000 +#define MX25_PAD_LD4__GPIO_2_19 0x0d8 0x2d0 0x000 0x05 0x000 -#define MX25_PAD_LD5__LD5 0x0dc 0x2d4 0x000 0x10 0x000 -#define MX25_PAD_LD5__GPIO_1_19 0x0dc 0x2d4 0x000 0x15 0x000 +#define MX25_PAD_LD5__LD5 0x0dc 0x2d4 0x000 0x00 0x000 +#define MX25_PAD_LD5__GPIO_1_19 0x0dc 0x2d4 0x000 0x05 0x000 -#define MX25_PAD_LD6__LD6 0x0e0 0x2d8 0x000 0x10 0x000 -#define MX25_PAD_LD6__GPIO_1_20 0x0e0 0x2d8 0x000 0x15 0x000 +#define MX25_PAD_LD6__LD6 0x0e0 0x2d8 0x000 0x00 0x000 +#define MX25_PAD_LD6__GPIO_1_20 0x0e0 0x2d8 0x000 0x05 0x000 -#define MX25_PAD_LD7__LD7 0x0e4 0x2dc 0x000 0x10 0x000 -#define MX25_PAD_LD7__GPIO_1_21 0x0e4 0x2dc 0x000 0x15 0x000 +#define MX25_PAD_LD7__LD7 0x0e4 0x2dc 0x000 0x00 0x000 +#define MX25_PAD_LD7__GPIO_1_21 0x0e4 0x2dc 0x000 0x05 0x000 -#define MX25_PAD_LD8__LD8 0x0e8 0x2e0 0x000 0x10 0x000 -#define MX25_PAD_LD8__UART4_RXD 0x0e8 0x2e0 0x570 0x12 0x000 -#define MX25_PAD_LD8__FEC_TX_ERR 0x0e8 0x2e0 0x000 0x15 0x000 +#define MX25_PAD_LD8__LD8 0x0e8 0x2e0 0x000 0x00 0x000 +#define MX25_PAD_LD8__UART4_RXD 0x0e8 0x2e0 0x570 0x02 0x000 +#define MX25_PAD_LD8__FEC_TX_ERR 0x0e8 0x2e0 0x000 0x05 0x000 #define MX25_PAD_LD8__SDHC2_CMD 0x0e8 0x2e0 0x4e0 0x06 0x000 -#define MX25_PAD_LD9__LD9 0x0ec 0x2e4 0x000 0x10 0x000 -#define MX25_PAD_LD9__UART4_TXD 0x0ec 0x2e4 0x000 0x12 0x000 -#define MX25_PAD_LD9__FEC_COL 0x0ec 0x2e4 0x504 0x15 0x001 +#define MX25_PAD_LD9__LD9 0x0ec 0x2e4 0x000 0x00 0x000 +#define MX25_PAD_LD9__UART4_TXD 0x0ec 0x2e4 0x000 0x02 0x000 +#define MX25_PAD_LD9__FEC_COL 0x0ec 0x2e4 0x504 0x05 0x001 #define MX25_PAD_LD9__SDHC2_CLK 0x0ec 0x2e4 0x4dc 0x06 0x000 #define MX25_PAD_LD10__LD10 0x0f0 0x2e8 0x000 0x00 0x000 #define MX25_PAD_LD10__UART4_RTS 0x0f0 0x2e8 0x56c 0x02 0x000 #define MX25_PAD_LD10__FEC_RX_ERR 0x0f0 0x2e8 0x518 0x05 0x001 -#define MX25_PAD_LD11__LD11 0x0f4 0x2ec 0x000 0x10 0x000 -#define MX25_PAD_LD11__UART4_CTS 0x0f4 0x2ec 0x000 0x12 0x000 -#define MX25_PAD_LD11__FEC_RDATA2 0x0f4 0x2ec 0x50c 0x15 0x001 +#define MX25_PAD_LD11__LD11 0x0f4 0x2ec 0x000 0x00 0x000 +#define MX25_PAD_LD11__UART4_CTS 0x0f4 0x2ec 0x000 0x02 0x000 +#define MX25_PAD_LD11__FEC_RDATA2 0x0f4 0x2ec 0x50c 0x05 0x001 #define MX25_PAD_LD11__SDHC2_DAT1 0x0f4 0x2ec 0x4e8 0x06 0x000 -#define MX25_PAD_LD12__LD12 0x0f8 0x2f0 0x000 0x10 0x000 +#define MX25_PAD_LD12__LD12 0x0f8 0x2f0 0x000 0x00 0x000 #define MX25_PAD_LD12__CSPI2_MOSI 0x0f8 0x2f0 0x4a0 0x02 0x000 -#define MX25_PAD_LD12__FEC_RDATA3 0x0f8 0x2f0 0x510 0x15 0x001 +#define MX25_PAD_LD12__FEC_RDATA3 0x0f8 0x2f0 0x510 0x05 0x001 -#define MX25_PAD_LD13__LD13 0x0fc 0x2f4 0x000 0x10 0x000 +#define MX25_PAD_LD13__LD13 0x0fc 0x2f4 0x000 0x00 0x000 #define MX25_PAD_LD13__CSPI2_MISO 0x0fc 0x2f4 0x49c 0x02 0x000 -#define MX25_PAD_LD13__FEC_TDATA2 0x0fc 0x2f4 0x000 0x15 0x000 +#define MX25_PAD_LD13__FEC_TDATA2 0x0fc 0x2f4 0x000 0x05 0x000 -#define MX25_PAD_LD14__LD14 0x100 0x2f8 0x000 0x10 0x000 +#define MX25_PAD_LD14__LD14 0x100 0x2f8 0x000 0x00 0x000 #define MX25_PAD_LD14__CSPI2_SCLK 0x100 0x2f8 0x494 0x02 0x000 -#define MX25_PAD_LD14__FEC_TDATA3 0x100 0x2f8 0x000 0x15 0x000 +#define MX25_PAD_LD14__FEC_TDATA3 0x100 0x2f8 0x000 0x05 0x000 -#define MX25_PAD_LD15__LD15 0x104 0x2fc 0x000 0x10 0x000 +#define MX25_PAD_LD15__LD15 0x104 0x2fc 0x000 0x00 0x000 #define MX25_PAD_LD15__CSPI2_RDY 0x104 0x2fc 0x498 0x02 0x000 -#define MX25_PAD_LD15__FEC_RX_CLK 0x104 0x2fc 0x514 0x15 0x001 +#define MX25_PAD_LD15__FEC_RX_CLK 0x104 0x2fc 0x514 0x05 0x001 -#define MX25_PAD_HSYNC__HSYNC 0x108 0x300 0x000 0x10 0x000 -#define MX25_PAD_HSYNC__GPIO_1_22 0x108 0x300 0x000 0x15 0x000 +#define MX25_PAD_HSYNC__HSYNC 0x108 0x300 0x000 0x00 0x000 +#define MX25_PAD_HSYNC__GPIO_1_22 0x108 0x300 0x000 0x05 0x000 -#define MX25_PAD_VSYNC__VSYNC 0x10c 0x304 0x000 0x10 0x000 -#define MX25_PAD_VSYNC__GPIO_1_23 0x10c 0x304 0x000 0x15 0x000 +#define MX25_PAD_VSYNC__VSYNC 0x10c 0x304 0x000 0x00 0x000 +#define MX25_PAD_VSYNC__GPIO_1_23 0x10c 0x304 0x000 0x05 0x000 -#define MX25_PAD_LSCLK__LSCLK 0x110 0x308 0x000 0x10 0x000 -#define MX25_PAD_LSCLK__GPIO_1_24 0x110 0x308 0x000 0x15 0x000 +#define MX25_PAD_LSCLK__LSCLK 0x110 0x308 0x000 0x00 0x000 +#define MX25_PAD_LSCLK__GPIO_1_24 0x110 0x308 0x000 0x05 0x000 -#define MX25_PAD_OE_ACD__OE_ACD 0x114 0x30c 0x000 0x10 0x000 +#define MX25_PAD_OE_ACD__OE_ACD 0x114 0x30c 0x000 0x00 0x000 #define MX25_PAD_OE_ACD__CSPI2_SS0 0x114 0x30c 0x4a4 0x02 0x000 -#define MX25_PAD_OE_ACD__GPIO_1_25 0x114 0x30c 0x000 0x15 0x000 +#define MX25_PAD_OE_ACD__GPIO_1_25 0x114 0x30c 0x000 0x05 0x000 -#define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x10 0x000 -#define MX25_PAD_CONTRAST__CC4 0x118 0x310 0x000 0x11 0x000 -#define MX25_PAD_CONTRAST__PWM4_PWMO 0x118 0x310 0x000 0x14 0x000 -#define MX25_PAD_CONTRAST__FEC_CRS 0x118 0x310 0x508 0x15 0x001 -#define MX25_PAD_CONTRAST__USBH2_PWR 0x118 0x310 0x000 0x16 0x000 +#define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x00 0x000 +#define MX25_PAD_CONTRAST__CC4 0x118 0x310 0x000 0x01 0x000 +#define MX25_PAD_CONTRAST__PWM4_PWMO 0x118 0x310 0x000 0x04 0x000 +#define MX25_PAD_CONTRAST__FEC_CRS 0x118 0x310 0x508 0x05 0x001 +#define MX25_PAD_CONTRAST__USBH2_PWR 0x118 0x310 0x000 0x06 0x000 -#define MX25_PAD_PWM__PWM 0x11c 0x314 0x000 0x10 0x000 -#define MX25_PAD_PWM__GPIO_1_26 0x11c 0x314 0x000 0x15 0x000 -#define MX25_PAD_PWM__USBH2_OC 0x11c 0x314 0x580 0x16 0x001 +#define MX25_PAD_PWM__PWM 0x11c 0x314 0x000 0x00 0x000 +#define MX25_PAD_PWM__GPIO_1_26 0x11c 0x314 0x000 0x05 0x000 +#define MX25_PAD_PWM__USBH2_OC 0x11c 0x314 0x580 0x06 0x001 -#define MX25_PAD_CSI_D2__CSI_D2 0x120 0x318 0x000 0x10 0x000 -#define MX25_PAD_CSI_D2__UART5_RXD 0x120 0x318 0x578 0x11 0x001 +#define MX25_PAD_CSI_D2__CSI_D2 0x120 0x318 0x000 0x00 0x000 +#define MX25_PAD_CSI_D2__UART5_RXD 0x120 0x318 0x578 0x01 0x001 #define MX25_PAD_CSI_D2__SIM1_CLK0 0x120 0x318 0x000 0x04 0x000 -#define MX25_PAD_CSI_D2__GPIO_1_27 0x120 0x318 0x000 0x15 0x000 -#define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x17 0x000 +#define MX25_PAD_CSI_D2__GPIO_1_27 0x120 0x318 0x000 0x05 0x000 +#define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x07 0x000 -#define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x10 0x000 -#define MX25_PAD_CSI_D3__UART5_TXD 0x124 0x31c 0x000 0x11 0x000 +#define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x00 0x000 +#define MX25_PAD_CSI_D3__UART5_TXD 0x124 0x31c 0x000 0x01 0x000 #define MX25_PAD_CSI_D3__SIM1_RST0 0x124 0x31c 0x000 0x04 0x000 -#define MX25_PAD_CSI_D3__GPIO_1_28 0x124 0x31c 0x000 0x15 0x000 -#define MX25_PAD_CSI_D3__CSPI3_MISO 0x124 0x31c 0x4b4 0x17 0x001 +#define MX25_PAD_CSI_D3__GPIO_1_28 0x124 0x31c 0x000 0x05 0x000 +#define MX25_PAD_CSI_D3__CSPI3_MISO 0x124 0x31c 0x4b4 0x07 0x001 #define MX25_PAD_CSI_D4__CSI_D4 0x128 0x320 0x000 0x00 0x000 #define MX25_PAD_CSI_D4__UART5_RTS 0x128 0x320 0x574 0x01 0x001 @@ -312,80 +312,80 @@ #define MX25_PAD_CSI_D4__GPIO_1_29 0x128 0x320 0x000 0x05 0x000 #define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x000 0x07 0x000 -#define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x10 0x000 -#define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x11 0x000 +#define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x00 0x000 +#define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x01 0x000 #define MX25_PAD_CSI_D5__SIM1_TX0 0x12c 0x324 0x000 0x04 0x000 -#define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x15 0x000 -#define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x17 0x000 +#define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x05 0x000 +#define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x07 0x000 -#define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x10 0x000 -#define MX25_PAD_CSI_D6__SDHC2_CMD 0x130 0x328 0x4e0 0x12 0x001 +#define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x00 0x000 +#define MX25_PAD_CSI_D6__SDHC2_CMD 0x130 0x328 0x4e0 0x02 0x001 #define MX25_PAD_CSI_D6__SIM1_PD0 0x130 0x328 0x000 0x04 0x000 -#define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x15 0x000 +#define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x05 0x000 -#define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x10 0x000 -#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK 0x134 0x32C 0x4dc 0x12 0x001 -#define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x15 0x000 +#define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x00 0x000 +#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK 0x134 0x32C 0x4dc 0x02 0x001 +#define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x05 0x000 -#define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x10 0x000 -#define MX25_PAD_CSI_D8__AUD6_RXC 0x138 0x330 0x000 0x12 0x000 -#define MX25_PAD_CSI_D8__GPIO_1_7 0x138 0x330 0x000 0x15 0x000 -#define MX25_PAD_CSI_D8__CSPI3_SS2 0x138 0x330 0x4c4 0x17 0x000 +#define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x00 0x000 +#define MX25_PAD_CSI_D8__AUD6_RXC 0x138 0x330 0x000 0x02 0x000 +#define MX25_PAD_CSI_D8__GPIO_1_7 0x138 0x330 0x000 0x05 0x000 +#define MX25_PAD_CSI_D8__CSPI3_SS2 0x138 0x330 0x4c4 0x07 0x000 -#define MX25_PAD_CSI_D9__CSI_D9 0x13c 0x334 0x000 0x10 0x000 -#define MX25_PAD_CSI_D9__AUD6_RXFS 0x13c 0x334 0x000 0x12 0x000 -#define MX25_PAD_CSI_D9__GPIO_4_21 0x13c 0x334 0x000 0x15 0x000 -#define MX25_PAD_CSI_D9__CSPI3_SS3 0x13c 0x334 0x4c8 0x17 0x000 +#define MX25_PAD_CSI_D9__CSI_D9 0x13c 0x334 0x000 0x00 0x000 +#define MX25_PAD_CSI_D9__AUD6_RXFS 0x13c 0x334 0x000 0x02 0x000 +#define MX25_PAD_CSI_D9__GPIO_4_21 0x13c 0x334 0x000 0x05 0x000 +#define MX25_PAD_CSI_D9__CSPI3_SS3 0x13c 0x334 0x4c8 0x07 0x000 -#define MX25_PAD_CSI_MCLK__CSI_MCLK 0x140 0x338 0x000 0x10 0x000 -#define MX25_PAD_CSI_MCLK__AUD6_TXD 0x140 0x338 0x000 0x11 0x000 -#define MX25_PAD_CSI_MCLK__SDHC2_DAT0 0x140 0x338 0x4e4 0x12 0x001 -#define MX25_PAD_CSI_MCLK__GPIO_1_8 0x140 0x338 0x000 0x15 0x000 +#define MX25_PAD_CSI_MCLK__CSI_MCLK 0x140 0x338 0x000 0x00 0x000 +#define MX25_PAD_CSI_MCLK__AUD6_TXD 0x140 0x338 0x000 0x01 0x000 +#define MX25_PAD_CSI_MCLK__SDHC2_DAT0 0x140 0x338 0x4e4 0x02 0x001 +#define MX25_PAD_CSI_MCLK__GPIO_1_8 0x140 0x338 0x000 0x05 0x000 -#define MX25_PAD_CSI_VSYNC__CSI_VSYNC 0x144 0x33c 0x000 0x10 0x000 -#define MX25_PAD_CSI_VSYNC__AUD6_RXD 0x144 0x33c 0x000 0x11 0x000 -#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1 0x144 0x33c 0x4e8 0x12 0x001 -#define MX25_PAD_CSI_VSYNC__GPIO_1_9 0x144 0x33c 0x000 0x15 0x000 +#define MX25_PAD_CSI_VSYNC__CSI_VSYNC 0x144 0x33c 0x000 0x00 0x000 +#define MX25_PAD_CSI_VSYNC__AUD6_RXD 0x144 0x33c 0x000 0x01 0x000 +#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1 0x144 0x33c 0x4e8 0x02 0x001 +#define MX25_PAD_CSI_VSYNC__GPIO_1_9 0x144 0x33c 0x000 0x05 0x000 -#define MX25_PAD_CSI_HSYNC__CSI_HSYNC 0x148 0x340 0x000 0x10 0x000 -#define MX25_PAD_CSI_HSYNC__AUD6_TXC 0x148 0x340 0x000 0x11 0x000 -#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2 0x148 0x340 0x4ec 0x12 0x001 -#define MX25_PAD_CSI_HSYNC__GPIO_1_10 0x148 0x340 0x000 0x15 0x000 +#define MX25_PAD_CSI_HSYNC__CSI_HSYNC 0x148 0x340 0x000 0x00 0x000 +#define MX25_PAD_CSI_HSYNC__AUD6_TXC 0x148 0x340 0x000 0x01 0x000 +#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2 0x148 0x340 0x4ec 0x02 0x001 +#define MX25_PAD_CSI_HSYNC__GPIO_1_10 0x148 0x340 0x000 0x05 0x000 -#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK 0x14c 0x344 0x000 0x10 0x000 -#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS 0x14c 0x344 0x000 0x11 0x000 -#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3 0x14c 0x344 0x4f0 0x12 0x001 -#define MX25_PAD_CSI_PIXCLK__GPIO_1_11 0x14c 0x344 0x000 0x15 0x000 +#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK 0x14c 0x344 0x000 0x00 0x000 +#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS 0x14c 0x344 0x000 0x01 0x000 +#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3 0x14c 0x344 0x4f0 0x02 0x001 +#define MX25_PAD_CSI_PIXCLK__GPIO_1_11 0x14c 0x344 0x000 0x05 0x000 -#define MX25_PAD_I2C1_CLK__I2C1_CLK 0x150 0x348 0x000 0x10 0x000 -#define MX25_PAD_I2C1_CLK__GPIO_1_12 0x150 0x348 0x000 0x15 0x000 +#define MX25_PAD_I2C1_CLK__I2C1_CLK 0x150 0x348 0x000 0x00 0x000 +#define MX25_PAD_I2C1_CLK__GPIO_1_12 0x150 0x348 0x000 0x05 0x000 -#define MX25_PAD_I2C1_DAT__I2C1_DAT 0x154 0x34c 0x000 0x10 0x000 -#define MX25_PAD_I2C1_DAT__GPIO_1_13 0x154 0x34c 0x000 0x15 0x000 +#define MX25_PAD_I2C1_DAT__I2C1_DAT 0x154 0x34c 0x000 0x00 0x000 +#define MX25_PAD_I2C1_DAT__GPIO_1_13 0x154 0x34c 0x000 0x05 0x000 -#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI 0x158 0x350 0x000 0x10 0x000 -#define MX25_PAD_CSPI1_MOSI__UART3_RXD 0x158 0x350 0x568 0x12 0x000 -#define MX25_PAD_CSPI1_MOSI__GPIO_1_14 0x158 0x350 0x000 0x15 0x000 +#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI 0x158 0x350 0x000 0x00 0x000 +#define MX25_PAD_CSPI1_MOSI__UART3_RXD 0x158 0x350 0x568 0x02 0x000 +#define MX25_PAD_CSPI1_MOSI__GPIO_1_14 0x158 0x350 0x000 0x05 0x000 -#define MX25_PAD_CSPI1_MISO__CSPI1_MISO 0x15c 0x354 0x000 0x10 0x000 -#define MX25_PAD_CSPI1_MISO__UART3_TXD 0x15c 0x354 0x000 0x12 0x000 -#define MX25_PAD_CSPI1_MISO__GPIO_1_15 0x15c 0x354 0x000 0x15 0x000 +#define MX25_PAD_CSPI1_MISO__CSPI1_MISO 0x15c 0x354 0x000 0x00 0x000 +#define MX25_PAD_CSPI1_MISO__UART3_TXD 0x15c 0x354 0x000 0x02 0x000 +#define MX25_PAD_CSPI1_MISO__GPIO_1_15 0x15c 0x354 0x000 0x05 0x000 -#define MX25_PAD_CSPI1_SS0__CSPI1_SS0 0x160 0x358 0x000 0x10 0x000 -#define MX25_PAD_CSPI1_SS0__PWM2_PWMO 0x160 0x358 0x000 0x12 0x000 -#define MX25_PAD_CSPI1_SS0__GPIO_1_16 0x160 0x358 0x000 0x15 0x000 +#define MX25_PAD_CSPI1_SS0__CSPI1_SS0 0x160 0x358 0x000 0x00 0x000 +#define MX25_PAD_CSPI1_SS0__PWM2_PWMO 0x160 0x358 0x000 0x02 0x000 +#define MX25_PAD_CSPI1_SS0__GPIO_1_16 0x160 0x358 0x000 0x05 0x000 #define MX25_PAD_CSPI1_SS1__CSPI1_SS1 0x164 0x35c 0x000 0x00 0x000 #define MX25_PAD_CSPI1_SS1__I2C3_DAT 0x164 0x35C 0x528 0x01 0x001 #define MX25_PAD_CSPI1_SS1__UART3_RTS 0x164 0x35c 0x000 0x02 0x000 #define MX25_PAD_CSPI1_SS1__GPIO_1_17 0x164 0x35c 0x000 0x05 0x000 -#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK 0x168 0x360 0x000 0x10 0x000 -#define MX25_PAD_CSPI1_SCLK__UART3_CTS 0x168 0x360 0x000 0x12 0x000 -#define MX25_PAD_CSPI1_SCLK__GPIO_1_18 0x168 0x360 0x000 0x15 0x000 +#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK 0x168 0x360 0x000 0x00 0x000 +#define MX25_PAD_CSPI1_SCLK__UART3_CTS 0x168 0x360 0x000 0x02 0x000 +#define MX25_PAD_CSPI1_SCLK__GPIO_1_18 0x168 0x360 0x000 0x05 0x000 -#define MX25_PAD_CSPI1_RDY__CSPI1_RDY 0x16c 0x364 0x000 0x10 0x000 -#define MX25_PAD_CSPI1_RDY__GPIO_2_22 0x16c 0x364 0x000 0x15 0x000 +#define MX25_PAD_CSPI1_RDY__CSPI1_RDY 0x16c 0x364 0x000 0x00 0x000 +#define MX25_PAD_CSPI1_RDY__GPIO_2_22 0x16c 0x364 0x000 0x05 0x000 #define MX25_PAD_UART1_RXD__UART1_RXD 0x170 0x368 0x000 0x00 0x000 #define MX25_PAD_UART1_RXD__UART2_DTR 0x170 0x368 0x000 0x03 0x000 @@ -406,46 +406,55 @@ #define MX25_PAD_UART1_CTS__UART2_RI 0x17c 0x374 0x000 0x03 0x001 #define MX25_PAD_UART1_CTS__GPIO_4_25 0x17c 0x374 0x000 0x05 0x000 -#define MX25_PAD_UART2_RXD__UART2_RXD 0x180 0x378 0x000 0x10 0x000 -#define MX25_PAD_UART2_RXD__GPIO_4_26 0x180 0x378 0x000 0x15 0x000 +#define MX25_PAD_UART2_RXD__UART2_RXD 0x180 0x378 0x000 0x00 0x000 +#define MX25_PAD_UART2_RXD__GPIO_4_26 0x180 0x378 0x000 0x05 0x000 -#define MX25_PAD_UART2_TXD__UART2_TXD 0x184 0x37c 0x000 0x10 0x000 -#define MX25_PAD_UART2_TXD__GPIO_4_27 0x184 0x37c 0x000 0x15 0x000 +#define MX25_PAD_UART2_TXD__UART2_TXD 0x184 0x37c 0x000 0x00 0x000 +#define MX25_PAD_UART2_TXD__GPIO_4_27 0x184 0x37c 0x000 0x05 0x000 #define MX25_PAD_UART2_RTS__UART2_RTS 0x188 0x380 0x000 0x00 0x000 #define MX25_PAD_UART2_RTS__FEC_COL 0x188 0x380 0x504 0x02 0x002 #define MX25_PAD_UART2_RTS__CC1 0x188 0x380 0x000 0x03 0x000 #define MX25_PAD_UART2_RTS__GPIO_4_28 0x188 0x380 0x000 0x05 0x000 -#define MX25_PAD_UART2_CTS__UART2_CTS 0x18c 0x384 0x000 0x10 0x000 -#define MX25_PAD_UART2_CTS__FEC_RX_ERR 0x18c 0x384 0x518 0x12 0x002 -#define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x15 0x000 +#define MX25_PAD_UART2_CTS__UART2_CTS 0x18c 0x384 0x000 0x00 0x000 +#define MX25_PAD_UART2_CTS__FEC_RX_ERR 0x18c 0x384 0x518 0x02 0x002 +#define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x05 0x000 +/* + * Removing the SION bit from MX25_PAD_SD1_CMD__SD1_CMD breaks detecting an SD + * card. According to the i.MX25 reference manual (e.g. Figure 23-2 in IMX25RM + * Rev. 2 from 01/2011) this pin is bidirectional. So it seems to be a silicon + * bug that configuring the SD1_CMD function doesn't enable the input path for + * this pin. + * This might have side effects for other hardware units that are connected to + * that pin and use the respective function as input. + */ #define MX25_PAD_SD1_CMD__SD1_CMD 0x190 0x388 0x000 0x10 0x000 -#define MX25_PAD_SD1_CMD__CSPI2_MOSI 0x190 0x388 0x4a0 0x11 0x001 -#define MX25_PAD_SD1_CMD__FEC_RDATA2 0x190 0x388 0x50c 0x12 0x002 -#define MX25_PAD_SD1_CMD__GPIO_2_23 0x190 0x388 0x000 0x15 0x000 +#define MX25_PAD_SD1_CMD__CSPI2_MOSI 0x190 0x388 0x4a0 0x01 0x001 +#define MX25_PAD_SD1_CMD__FEC_RDATA2 0x190 0x388 0x50c 0x02 0x002 +#define MX25_PAD_SD1_CMD__GPIO_2_23 0x190 0x388 0x000 0x05 0x000 -#define MX25_PAD_SD1_CLK__SD1_CLK 0x194 0x38c 0x000 0x10 0x000 -#define MX25_PAD_SD1_CLK__CSPI2_MISO 0x194 0x38c 0x49c 0x11 0x001 -#define MX25_PAD_SD1_CLK__FEC_RDATA3 0x194 0x38c 0x510 0x12 0x002 -#define MX25_PAD_SD1_CLK__GPIO_2_24 0x194 0x38c 0x000 0x15 0x000 +#define MX25_PAD_SD1_CLK__SD1_CLK 0x194 0x38c 0x000 0x00 0x000 +#define MX25_PAD_SD1_CLK__CSPI2_MISO 0x194 0x38c 0x49c 0x01 0x001 +#define MX25_PAD_SD1_CLK__FEC_RDATA3 0x194 0x38c 0x510 0x02 0x002 +#define MX25_PAD_SD1_CLK__GPIO_2_24 0x194 0x38c 0x000 0x05 0x000 -#define MX25_PAD_SD1_DATA0__SD1_DATA0 0x198 0x390 0x000 0x10 0x000 -#define MX25_PAD_SD1_DATA0__CSPI2_SCLK 0x198 0x390 0x494 0x11 0x001 -#define MX25_PAD_SD1_DATA0__GPIO_2_25 0x198 0x390 0x000 0x15 0x000 +#define MX25_PAD_SD1_DATA0__SD1_DATA0 0x198 0x390 0x000 0x00 0x000 +#define MX25_PAD_SD1_DATA0__CSPI2_SCLK 0x198 0x390 0x494 0x01 0x001 +#define MX25_PAD_SD1_DATA0__GPIO_2_25 0x198 0x390 0x000 0x05 0x000 -#define MX25_PAD_SD1_DATA1__SD1_DATA1 0x19c 0x394 0x000 0x10 0x000 -#define MX25_PAD_SD1_DATA1__AUD7_RXD 0x19c 0x394 0x478 0x13 0x000 -#define MX25_PAD_SD1_DATA1__GPIO_2_26 0x19c 0x394 0x000 0x15 0x000 +#define MX25_PAD_SD1_DATA1__SD1_DATA1 0x19c 0x394 0x000 0x00 0x000 +#define MX25_PAD_SD1_DATA1__AUD7_RXD 0x19c 0x394 0x478 0x03 0x000 +#define MX25_PAD_SD1_DATA1__GPIO_2_26 0x19c 0x394 0x000 0x05 0x000 -#define MX25_PAD_SD1_DATA2__SD1_DATA2 0x1a0 0x398 0x000 0x10 0x000 -#define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x12 0x002 -#define MX25_PAD_SD1_DATA2__GPIO_2_27 0x1a0 0x398 0x000 0x15 0x000 +#define MX25_PAD_SD1_DATA2__SD1_DATA2 0x1a0 0x398 0x000 0x00 0x000 +#define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x02 0x002 +#define MX25_PAD_SD1_DATA2__GPIO_2_27 0x1a0 0x398 0x000 0x05 0x000 -#define MX25_PAD_SD1_DATA3__SD1_DATA3 0x1a4 0x39c 0x000 0x10 0x000 -#define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x12 0x002 -#define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x15 0x000 +#define MX25_PAD_SD1_DATA3__SD1_DATA3 0x1a4 0x39c 0x000 0x00 0x000 +#define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x02 0x002 +#define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x05 0x000 #define MX25_PAD_KPP_ROW0__KPP_ROW0 0x1a8 0x3a0 0x000 0x00 0x000 #define MX25_PAD_KPP_ROW0__UART3_RXD 0x1a8 0x3a0 0x568 0x01 0x001 @@ -469,123 +478,123 @@ #define MX25_PAD_KPP_ROW3__UART1_RI 0x1b4 0x3ac 0x000 0x04 0x000 #define MX25_PAD_KPP_ROW3__GPIO_3_0 0x1b4 0x3ac 0x000 0x05 0x000 -#define MX25_PAD_KPP_COL0__KPP_COL0 0x1b8 0x3b0 0x000 0x10 0x000 -#define MX25_PAD_KPP_COL0__UART4_RXD 0x1b8 0x3b0 0x570 0x11 0x001 -#define MX25_PAD_KPP_COL0__AUD5_TXD 0x1b8 0x3b0 0x000 0x12 0x000 -#define MX25_PAD_KPP_COL0__GPIO_3_1 0x1b8 0x3b0 0x000 0x15 0x000 +#define MX25_PAD_KPP_COL0__KPP_COL0 0x1b8 0x3b0 0x000 0x00 0x000 +#define MX25_PAD_KPP_COL0__UART4_RXD 0x1b8 0x3b0 0x570 0x01 0x001 +#define MX25_PAD_KPP_COL0__AUD5_TXD 0x1b8 0x3b0 0x000 0x02 0x000 +#define MX25_PAD_KPP_COL0__GPIO_3_1 0x1b8 0x3b0 0x000 0x05 0x000 -#define MX25_PAD_KPP_COL1__KPP_COL1 0x1bc 0x3b4 0x000 0x10 0x000 -#define MX25_PAD_KPP_COL1__UART4_TXD 0x1bc 0x3b4 0x000 0x11 0x000 -#define MX25_PAD_KPP_COL1__AUD5_RXD 0x1bc 0x3b4 0x000 0x12 0x000 -#define MX25_PAD_KPP_COL1__GPIO_3_2 0x1bc 0x3b4 0x000 0x15 0x000 +#define MX25_PAD_KPP_COL1__KPP_COL1 0x1bc 0x3b4 0x000 0x00 0x000 +#define MX25_PAD_KPP_COL1__UART4_TXD 0x1bc 0x3b4 0x000 0x01 0x000 +#define MX25_PAD_KPP_COL1__AUD5_RXD 0x1bc 0x3b4 0x000 0x02 0x000 +#define MX25_PAD_KPP_COL1__GPIO_3_2 0x1bc 0x3b4 0x000 0x05 0x000 #define MX25_PAD_KPP_COL2__KPP_COL2 0x1c0 0x3b8 0x000 0x00 0x000 #define MX25_PAD_KPP_COL2__UART4_RTS 0x1c0 0x3b8 0x56c 0x01 0x001 #define MX25_PAD_KPP_COL2__AUD5_TXC 0x1c0 0x3b8 0x000 0x02 0x000 #define MX25_PAD_KPP_COL2__GPIO_3_3 0x1c0 0x3b8 0x000 0x05 0x000 -#define MX25_PAD_KPP_COL3__KPP_COL3 0x1c4 0x3bc 0x000 0x10 0x000 -#define MX25_PAD_KPP_COL3__UART4_CTS 0x1c4 0x3bc 0x000 0x11 0x000 -#define MX25_PAD_KPP_COL3__AUD5_TXFS 0x1c4 0x3bc 0x000 0x12 0x000 -#define MX25_PAD_KPP_COL3__GPIO_3_4 0x1c4 0x3bc 0x000 0x15 0x000 +#define MX25_PAD_KPP_COL3__KPP_COL3 0x1c4 0x3bc 0x000 0x00 0x000 +#define MX25_PAD_KPP_COL3__UART4_CTS 0x1c4 0x3bc 0x000 0x01 0x000 +#define MX25_PAD_KPP_COL3__AUD5_TXFS 0x1c4 0x3bc 0x000 0x02 0x000 +#define MX25_PAD_KPP_COL3__GPIO_3_4 0x1c4 0x3bc 0x000 0x05 0x000 -#define MX25_PAD_FEC_MDC__FEC_MDC 0x1c8 0x3c0 0x000 0x10 0x000 -#define MX25_PAD_FEC_MDC__AUD4_TXD 0x1c8 0x3c0 0x464 0x12 0x001 -#define MX25_PAD_FEC_MDC__GPIO_3_5 0x1c8 0x3c0 0x000 0x15 0x000 +#define MX25_PAD_FEC_MDC__FEC_MDC 0x1c8 0x3c0 0x000 0x00 0x000 +#define MX25_PAD_FEC_MDC__AUD4_TXD 0x1c8 0x3c0 0x464 0x02 0x001 +#define MX25_PAD_FEC_MDC__GPIO_3_5 0x1c8 0x3c0 0x000 0x05 0x000 -#define MX25_PAD_FEC_MDIO__FEC_MDIO 0x1cc 0x3c4 0x000 0x10 0x000 -#define MX25_PAD_FEC_MDIO__AUD4_RXD 0x1cc 0x3c4 0x460 0x12 0x001 -#define MX25_PAD_FEC_MDIO__GPIO_3_6 0x1cc 0x3c4 0x000 0x15 0x000 +#define MX25_PAD_FEC_MDIO__FEC_MDIO 0x1cc 0x3c4 0x000 0x00 0x000 +#define MX25_PAD_FEC_MDIO__AUD4_RXD 0x1cc 0x3c4 0x460 0x02 0x001 +#define MX25_PAD_FEC_MDIO__GPIO_3_6 0x1cc 0x3c4 0x000 0x05 0x000 -#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x1d0 0x3c8 0x000 0x10 0x000 -#define MX25_PAD_FEC_TDATA0__GPIO_3_7 0x1d0 0x3c8 0x000 0x15 0x000 +#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x1d0 0x3c8 0x000 0x00 0x000 +#define MX25_PAD_FEC_TDATA0__GPIO_3_7 0x1d0 0x3c8 0x000 0x05 0x000 -#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x1d4 0x3cc 0x000 0x10 0x000 -#define MX25_PAD_FEC_TDATA1__AUD4_TXFS 0x1d4 0x3cc 0x474 0x12 0x001 -#define MX25_PAD_FEC_TDATA1__GPIO_3_8 0x1d4 0x3cc 0x000 0x15 0x000 +#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x1d4 0x3cc 0x000 0x00 0x000 +#define MX25_PAD_FEC_TDATA1__AUD4_TXFS 0x1d4 0x3cc 0x474 0x02 0x001 +#define MX25_PAD_FEC_TDATA1__GPIO_3_8 0x1d4 0x3cc 0x000 0x05 0x000 -#define MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x1d8 0x3d0 0x000 0x10 0x000 -#define MX25_PAD_FEC_TX_EN__GPIO_3_9 0x1d8 0x3d0 0x000 0x15 0x000 +#define MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x1d8 0x3d0 0x000 0x00 0x000 +#define MX25_PAD_FEC_TX_EN__GPIO_3_9 0x1d8 0x3d0 0x000 0x05 0x000 -#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x1dc 0x3d4 0x000 0x10 0x000 -#define MX25_PAD_FEC_RDATA0__GPIO_3_10 0x1dc 0x3d4 0x000 0x15 0x000 +#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x1dc 0x3d4 0x000 0x00 0x000 +#define MX25_PAD_FEC_RDATA0__GPIO_3_10 0x1dc 0x3d4 0x000 0x05 0x000 -#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x1e0 0x3d8 0x000 0x10 0x000 +#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x1e0 0x3d8 0x000 0x00 0x000 /* * According to the i.MX25 Reference manual (IMX25RM, Rev. 2, * 01/2011) this is CAN1_TX but that's wrong. */ -#define MX25_PAD_FEC_RDATA1__CAN2_TX 0x1e0 0x3d8 0x000 0x14 0x000 -#define MX25_PAD_FEC_RDATA1__GPIO_3_11 0x1e0 0x3d8 0x000 0x15 0x000 +#define MX25_PAD_FEC_RDATA1__CAN2_TX 0x1e0 0x3d8 0x000 0x04 0x000 +#define MX25_PAD_FEC_RDATA1__GPIO_3_11 0x1e0 0x3d8 0x000 0x05 0x000 -#define MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x1e4 0x3dc 0x000 0x10 0x000 +#define MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x1e4 0x3dc 0x000 0x00 0x000 /* * According to the i.MX25 Reference manual (IMX25RM, Rev. 2, * 01/2011) this is CAN1_RX but that's wrong. */ -#define MX25_PAD_FEC_RX_DV__CAN2_RX 0x1e4 0x3dc 0x484 0x14 0x000 -#define MX25_PAD_FEC_RX_DV__GPIO_3_12 0x1e4 0x3dc 0x000 0x15 0x000 +#define MX25_PAD_FEC_RX_DV__CAN2_RX 0x1e4 0x3dc 0x484 0x04 0x000 +#define MX25_PAD_FEC_RX_DV__GPIO_3_12 0x1e4 0x3dc 0x000 0x05 0x000 -#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1e8 0x3e0 0x000 0x10 0x000 -#define MX25_PAD_FEC_TX_CLK__GPIO_3_13 0x1e8 0x3e0 0x000 0x15 0x000 +#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1e8 0x3e0 0x000 0x00 0x000 +#define MX25_PAD_FEC_TX_CLK__GPIO_3_13 0x1e8 0x3e0 0x000 0x05 0x000 -#define MX25_PAD_RTCK__RTCK 0x1ec 0x3e4 0x000 0x10 0x000 -#define MX25_PAD_RTCK__OWIRE 0x1ec 0x3e4 0x000 0x11 0x000 -#define MX25_PAD_RTCK__GPIO_3_14 0x1ec 0x3e4 0x000 0x15 0x000 +#define MX25_PAD_RTCK__RTCK 0x1ec 0x3e4 0x000 0x00 0x000 +#define MX25_PAD_RTCK__OWIRE 0x1ec 0x3e4 0x000 0x01 0x000 +#define MX25_PAD_RTCK__GPIO_3_14 0x1ec 0x3e4 0x000 0x05 0x000 -#define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x10 0x000 -#define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x15 0x000 +#define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x00 0x000 +#define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x05 0x000 -#define MX25_PAD_GPIO_A__GPIO_A 0x1f4 0x3f0 0x000 0x10 0x000 -#define MX25_PAD_GPIO_A__CAN1_TX 0x1f4 0x3f0 0x000 0x16 0x000 -#define MX25_PAD_GPIO_A__USBOTG_PWR 0x1f4 0x3f0 0x000 0x12 0x000 +#define MX25_PAD_GPIO_A__GPIO_A 0x1f4 0x3f0 0x000 0x00 0x000 +#define MX25_PAD_GPIO_A__CAN1_TX 0x1f4 0x3f0 0x000 0x06 0x000 +#define MX25_PAD_GPIO_A__USBOTG_PWR 0x1f4 0x3f0 0x000 0x02 0x000 -#define MX25_PAD_GPIO_B__GPIO_B 0x1f8 0x3f4 0x000 0x10 0x000 -#define MX25_PAD_GPIO_B__USBOTG_OC 0x1f8 0x3f4 0x57c 0x12 0x001 -#define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x16 0x001 +#define MX25_PAD_GPIO_B__GPIO_B 0x1f8 0x3f4 0x000 0x00 0x000 +#define MX25_PAD_GPIO_B__USBOTG_OC 0x1f8 0x3f4 0x57c 0x02 0x001 +#define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x06 0x001 -#define MX25_PAD_GPIO_C__GPIO_C 0x1fc 0x3f8 0x000 0x10 0x000 -#define MX25_PAD_GPIO_C__PWM4_PWMO 0x1fc 0x3f8 0x000 0x11 0x000 -#define MX25_PAD_GPIO_C__I2C2_SCL 0x1fc 0x3f8 0x51c 0x12 0x001 -#define MX25_PAD_GPIO_C__KPP_COL4 0x1fc 0x3f8 0x52c 0x13 0x001 -#define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x16 0x000 +#define MX25_PAD_GPIO_C__GPIO_C 0x1fc 0x3f8 0x000 0x00 0x000 +#define MX25_PAD_GPIO_C__PWM4_PWMO 0x1fc 0x3f8 0x000 0x01 0x000 +#define MX25_PAD_GPIO_C__I2C2_SCL 0x1fc 0x3f8 0x51c 0x02 0x001 +#define MX25_PAD_GPIO_C__KPP_COL4 0x1fc 0x3f8 0x52c 0x03 0x001 +#define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x06 0x000 -#define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x10 0x000 -#define MX25_PAD_GPIO_D__I2C2_SDA 0x200 0x3fc 0x520 0x12 0x001 -#define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x16 0x001 +#define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x00 0x000 +#define MX25_PAD_GPIO_D__I2C2_SDA 0x200 0x3fc 0x520 0x02 0x001 +#define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x06 0x001 -#define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x10 0x000 -#define MX25_PAD_GPIO_E__I2C3_CLK 0x204 0x400 0x524 0x11 0x002 -#define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x12 0x000 -#define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x14 0x000 -#define MX25_PAD_GPIO_E__UART4_RXD 0x204 0x400 0x570 0x16 0x002 +#define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x00 0x000 +#define MX25_PAD_GPIO_E__I2C3_CLK 0x204 0x400 0x524 0x01 0x002 +#define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x02 0x000 +#define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x04 0x000 +#define MX25_PAD_GPIO_E__UART4_RXD 0x204 0x400 0x570 0x06 0x002 -#define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x10 0x000 -#define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x12 0x000 -#define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x14 0x000 -#define MX25_PAD_GPIO_F__UART4_TXD 0x208 0x404 0x000 0x16 0x000 +#define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x00 0x000 +#define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x02 0x000 +#define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x04 0x000 +#define MX25_PAD_GPIO_F__UART4_TXD 0x208 0x404 0x000 0x06 0x000 -#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK 0x20c 0x000 0x000 0x10 0x000 -#define MX25_PAD_EXT_ARMCLK__GPIO_3_15 0x20c 0x000 0x000 0x15 0x000 +#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK 0x20c 0x000 0x000 0x00 0x000 +#define MX25_PAD_EXT_ARMCLK__GPIO_3_15 0x20c 0x000 0x000 0x05 0x000 -#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK 0x210 0x000 0x000 0x10 0x000 -#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16 0x210 0x000 0x000 0x15 0x000 +#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK 0x210 0x000 0x000 0x00 0x000 +#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16 0x210 0x000 0x000 0x05 0x000 #define MX25_PAD_VSTBY_REQ__VSTBY_REQ 0x214 0x408 0x000 0x00 0x000 #define MX25_PAD_VSTBY_REQ__AUD7_TXFS 0x214 0x408 0x000 0x04 0x000 #define MX25_PAD_VSTBY_REQ__GPIO_3_17 0x214 0x408 0x000 0x05 0x000 #define MX25_PAD_VSTBY_REQ__UART4_RTS 0x214 0x408 0x56c 0x06 0x002 -#define MX25_PAD_VSTBY_ACK__VSTBY_ACK 0x218 0x40c 0x000 0x10 0x000 -#define MX25_PAD_VSTBY_ACK__GPIO_3_18 0x218 0x40c 0x000 0x15 0x000 +#define MX25_PAD_VSTBY_ACK__VSTBY_ACK 0x218 0x40c 0x000 0x00 0x000 +#define MX25_PAD_VSTBY_ACK__GPIO_3_18 0x218 0x40c 0x000 0x05 0x000 -#define MX25_PAD_POWER_FAIL__POWER_FAIL 0x21c 0x410 0x000 0x10 0x000 -#define MX25_PAD_POWER_FAIL__AUD7_RXD 0x21c 0x410 0x478 0x14 0x001 -#define MX25_PAD_POWER_FAIL__GPIO_3_19 0x21c 0x410 0x000 0x15 0x000 -#define MX25_PAD_POWER_FAIL__UART4_CTS 0x21c 0x410 0x000 0x16 0x000 +#define MX25_PAD_POWER_FAIL__POWER_FAIL 0x21c 0x410 0x000 0x00 0x000 +#define MX25_PAD_POWER_FAIL__AUD7_RXD 0x21c 0x410 0x478 0x04 0x001 +#define MX25_PAD_POWER_FAIL__GPIO_3_19 0x21c 0x410 0x000 0x05 0x000 +#define MX25_PAD_POWER_FAIL__UART4_CTS 0x21c 0x410 0x000 0x06 0x000 -#define MX25_PAD_CLKO__CLKO 0x220 0x414 0x000 0x10 0x000 -#define MX25_PAD_CLKO__GPIO_2_21 0x220 0x414 0x000 0x15 0x000 +#define MX25_PAD_CLKO__CLKO 0x220 0x414 0x000 0x00 0x000 +#define MX25_PAD_CLKO__GPIO_2_21 0x220 0x414 0x000 0x05 0x000 #define MX25_PAD_BOOT_MODE0__BOOT_MODE0 0x224 0x000 0x000 0x00 0x000 #define MX25_PAD_BOOT_MODE0__GPIO_4_30 0x224 0x000 0x000 0x05 0x000 diff --git a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi index e2242638ea0b..2cf896c505f9 100644 --- a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi +++ b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi @@ -77,7 +77,7 @@ &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts index 2ab65fc4c1e1..27846ff9bb0d 100644 --- a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts +++ b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts @@ -140,21 +140,21 @@ }; &uart1 { - fsl,uart-has-rtscts; + uart-has-rtscts; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; &uart2 { - fsl,uart-has-rtscts; + uart-has-rtscts; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; status = "okay"; }; &uart3 { - fsl,uart-has-rtscts; + uart-has-rtscts; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts index 49450dbbcab8..d0ef496a1af8 100644 --- a/arch/arm/boot/dts/imx27-pdk.dts +++ b/arch/arm/boot/dts/imx27-pdk.dts @@ -106,7 +106,7 @@ }; &uart1 { - fsl,uart-has-rtscts; + uart-has-rtscts; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts index 7c869fe3c30b..bfd4946cf9fe 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts @@ -147,21 +147,21 @@ }; &uart1 { - fsl,uart-has-rtscts; + uart-has-rtscts; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; &uart2 { - fsl,uart-has-rtscts; + uart-has-rtscts; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; status = "okay"; }; &uart3 { - fsl,uart-has-rtscts; + uart-has-rtscts; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts index 538568b0de26..cf09e72aeb06 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -283,14 +283,14 @@ }; &uart1 { - fsl,uart-has-rtscts; + uart-has-rtscts; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; &uart2 { - fsl,uart-has-rtscts; + uart-has-rtscts; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts index 1eaa131e2d18..c4fadbc1b400 100644 --- a/arch/arm/boot/dts/imx28-apf28dev.dts +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -140,7 +140,7 @@ auart0: serial@8006a000 { pinctrl-names = "default"; pinctrl-0 = <&auart0_pins_a>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index ef944b6d4f01..a9c347e48bcf 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -426,7 +426,7 @@ }; - onewire@0 { + onewire { compatible = "w1-gpio"; pinctrl-names = "default"; pinctrl-0 = <&w1_gpio_pins>; diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi index 88594747f454..581e85f4fd4c 100644 --- a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi +++ b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi @@ -84,6 +84,7 @@ reg_3p3v: regulator@0 { compatible = "regulator-fixed"; + reg = <0>; regulator-name = "3P3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -92,6 +93,7 @@ reg_lcd_3v3: regulator@1 { compatible = "regulator-fixed"; + reg = <1>; pinctrl-names = "default"; pinctrl-0 = <®_lcd_3v3_pins_mbmx28lc>; regulator-name = "lcd-3v3"; @@ -103,6 +105,7 @@ reg_usb0_vbus: regulator@2 { compatible = "regulator-fixed"; + reg = <2>; pinctrl-names = "default"; pinctrl-0 = <®_usb0_vbus_pins_mbmx28lc>; regulator-name = "usb0_vbus"; @@ -114,6 +117,7 @@ reg_usb1_vbus: regulator@3 { compatible = "regulator-fixed"; + reg = <3>; pinctrl-names = "default"; pinctrl-0 = <®_usb1_vbus_pins_mbmx28lc>; regulator-name = "usb1_vbus"; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index e3ef94ac159f..a5ba669b4eaa 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -224,7 +224,7 @@ auart0: serial@8006a000 { pinctrl-names = "default"; pinctrl-0 = <&auart0_pins_a>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index fd20e99c777e..0ebbc83852d0 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -173,7 +173,7 @@ default-brightness-level = <50>; }; - matrix_keypad: matrix-keypad@0 { + matrix_keypad: matrix-keypad { compatible = "gpio-matrix-keypad"; col-gpios = < &gpio5 0 GPIO_ACTIVE_HIGH diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 74aa151cdb45..0ad893bf5f43 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -165,6 +165,7 @@ gpio0: gpio@0 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + reg = <0>; interrupts = <127>; gpio-controller; #gpio-cells = <2>; @@ -174,6 +175,7 @@ gpio1: gpio@1 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + reg = <1>; interrupts = <126>; gpio-controller; #gpio-cells = <2>; @@ -183,6 +185,7 @@ gpio2: gpio@2 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + reg = <2>; interrupts = <125>; gpio-controller; #gpio-cells = <2>; @@ -192,6 +195,7 @@ gpio3: gpio@3 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + reg = <3>; interrupts = <124>; gpio-controller; #gpio-cells = <2>; @@ -201,6 +205,7 @@ gpio4: gpio@4 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + reg = <4>; interrupts = <123>; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts index 2424abfc9c7b..ae6cebbed84b 100644 --- a/arch/arm/boot/dts/imx31-bug.dts +++ b/arch/arm/boot/dts/imx31-bug.dts @@ -22,6 +22,6 @@ }; &uart5 { - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts index 4727bbb804e1..e9357131b026 100644 --- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts +++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts @@ -139,14 +139,14 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx35-pdk.dts b/arch/arm/boot/dts/imx35-pdk.dts index 8d715523708f..9bb628f22502 100644 --- a/arch/arm/boot/dts/imx35-pdk.dts +++ b/arch/arm/boot/dts/imx35-pdk.dts @@ -63,6 +63,6 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 018d24eb9965..f097b4f29ab4 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -388,7 +388,7 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; @@ -401,7 +401,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index d270df3e5891..728212861ece 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -261,14 +261,14 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts index 30f44b5565b9..ca1cc5eca80f 100644 --- a/arch/arm/boot/dts/imx51-ts4800.dts +++ b/arch/arm/boot/dts/imx51-ts4800.dts @@ -165,6 +165,27 @@ reg = <0x12000 0x1000>; syscon = <&syscon 0x10 6>; }; + + fpga_irqc: fpga-irqc@15000 { + compatible = "technologic,ts4800-irqc"; + reg = <0x15000 0x1000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_interrupt_fpga>; + interrupt-parent = <&gpio2>; + interrupts= <9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + can@1a000 { + compatible = "technologic,sja1000"; + reg = <0x1a000 0x100>; + interrupt-parent = <&fpga_irqc>; + interrupts = <1>; + reg-io-width = <2>; + nxp,tx-output-config = <0x06>; + nxp,external-clock-frequency = <24000000>; + }; }; }; @@ -228,6 +249,12 @@ >; }; + pinctrl_interrupt_fpga: fpgaicgrp { + fsl,pins = < + MX51_PAD_EIM_D27__GPIO2_9 0xe5 + >; + }; + pinctrl_lcd: lcdgrp { fsl,pins = < MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5 diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 542ab9e697fb..9f5190040555 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -56,7 +56,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index e03373a58760..91a6a9ff50d7 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -218,7 +218,7 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index bd3dfefa5778..57e75f1639e0 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -513,21 +513,21 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index bfbed52ce1bd..2becd7cd6544 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -97,6 +97,7 @@ phy-reset-gpios = <&gpio3 31 0>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + fsl,err006687-workaround-present; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts index 8e67ca27ad79..207b85b91ada 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -93,7 +93,7 @@ reg = <0>; lcd_display_in: endpoint { - remote-endpoint = <&ipu1_di0_disp1>; + remote-endpoint = <&ipu1_di1_disp1>; }; }; @@ -210,7 +210,7 @@ }; }; -&ipu1_di0_disp1 { +&ipu1_di1_disp1 { remote-endpoint = <&lcd_display_in>; }; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index d6515f7a56c4..d8acf15611e4 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -185,6 +185,7 @@ phy-mode = "rgmii"; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + fsl,err006687-workaround-present; status = "okay"; }; @@ -218,7 +219,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; fsl,dte-mode; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index f7e17e2004ac..f2adc60723da 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -351,7 +351,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi index bb66dfd5294c..cf3fd31e3406 100644 --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -52,6 +52,12 @@ }; }; + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + status = "okay"; + }; + reg_wl18xx_vmmc: regulator-wl18xx { compatible = "regulator-fixed"; regulator-name = "vwl1807"; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index 99b46f8030ad..b5de7e620905 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -3,15 +3,46 @@ * * Author: Valentin Raevsky <valentin@compulab.co.il> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "imx6q.dtsi" / { @@ -31,6 +62,71 @@ linux,default-trigger = "heartbeat"; }; }; + + reg_pcie_power_on_gpio: regulator-pcie-power-on-gpio { + compatible = "regulator-fixed"; + regulator-name = "regulator-pcie-power-on-gpio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_h1_vbus: usb_h1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg_vbus: usb_otg_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&cpu0 { + /* + * Although the imx6q fuse indicates that 1.2GHz operation is possible, + * the module behaves unstable at this frequency. Hence, remove the + * 1.2GHz operation point here. + */ + operating-points = < + /* kHz uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p", "jedec,spi-nor"; + spi-max-frequency = <20000000>; + reg = <0>; + }; }; &fec { @@ -46,58 +142,122 @@ status = "okay"; }; +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + clock-frequency = <100000>; + + eeprom@50 { + compatible = "at24,24c02"; + reg = <0x50>; + pagesize = <16>; + }; +}; + &iomuxc { - imx6q-cm-fx6 { - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - >; - }; + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x100b1 + >; + }; - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 - >; - }; + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x130b0 + >; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>; + vdd-supply = <®_pcie_power_on_gpio>; + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; }; &uart4 { @@ -105,3 +265,18 @@ pinctrl-0 = <&pinctrl_uart4>; status = "okay"; }; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + dr_mode = "otg"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts new file mode 100644 index 000000000000..65e66f994f88 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-h100.dts @@ -0,0 +1,395 @@ +/* + * Copyright (C) 2015 Lucas Stach <kernel@pengutronix.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-microsom.dtsi" +#include "imx6qdl-microsom-ar8035.dtsi" + +/ { + model = "Auvidea H100"; + compatible = "auvidea,h100", "fsl,imx6q"; + + aliases { + rtc0 = &rtc; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = &uart2; + }; + + hdmi_osc: hdmi-osc { + compatible = "fixed-clock"; + clock-output-names = "hdmi-osc"; + clock-frequency = <27000000>; + #clock-cells = <0>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_h100_leds>; + + led0: power { + label = "power"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + led1: stream { + label = "stream"; + gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led2: rec { + label = "rec"; + gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_hdmi: regulator-hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_h100_reg_hdmi>; + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; + regulator-name = "V_HDMI"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_nvcc_sd2: regulator-nvcc-sd2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_h100_reg_nvcc_sd2>; + compatible = "regulator-gpio"; + regulator-name = "NVCC_SD2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-type = "voltage"; + regulator-boot-on; + regulator-always-on; + gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 + 3300000 0x0>; + }; + + reg_usbh1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_h100_usbh1_vbus>; + regulator-name = "USB_H1_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbotg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_h100_usbotg_vbus>; + regulator-name = "USB_OTG_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + sound-sgtl5000 { + compatible = "fsl,imx-audio-sgtl5000"; + model = "H100 on-board codec"; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-ext-port = <5>; + mux-int-port = <1>; + ssi-controller = <&ssi1>; + }; +}; + +&audmux { + status = "okay"; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_h100_hdmi>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_h100_i2c1>; + status = "okay"; + + eeprom: 24c02@51 { + compatible = "microchip,24c02", "at24"; + reg = <0x51>; + }; + + rtc: pcf8523@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + }; + + sgtl5000: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_h100_sgtl5000>; + clocks = <&clks IMX6QDL_CLK_CKO>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + }; + + tc358743: tc358743@0f { + compatible = "toshiba,tc358743"; + reg = <0x0f>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_h100_tc358743>; + clocks = <&hdmi_osc>; + clock-names = "refclk"; + reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; + /* IRQ has a wrong pull resistor which renders it useless */ + + port@0 { + tc358743_out: endpoint { + remote-endpoint = <&mipi_csi2_in>; + data-lanes = <1 2 3 4>; + clock-lanes = <0>; + clock-noncontinuous; + link-frequencies = /bits/ 64 <297000000>; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_h100_i2c2>; + status = "okay"; +}; + +&iomuxc { + h100 { + pinctrl_h100_hdmi: h100-hdmi { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_h100_i2c1: h100-i2c1 { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_h100_i2c2: h100-i2c2 { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_h100_leds: pinctrl-h100-leds { + fsl,pins = < + MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b0 + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0 + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0 + >; + }; + + pinctrl_h100_reg_hdmi: h100-reg-hdmi { + fsl,pins = < + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b0 + >; + }; + + pinctrl_h100_reg_nvcc_sd2: h100-reg-nvcc-sd2 { + fsl,pins = < + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 + >; + }; + + pinctrl_h100_sgtl5000: h100-sgtl5000 { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_h100_tc358743: h100-tc358743 { + fsl,pins = < + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 + >; + }; + + pinctrl_h100_uart2: h100-uart2 { + fsl,pins = < + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_h100_usbh1_vbus: hummingboard-usbh1-vbus { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + >; + }; + + pinctrl_h100_usbotg_id: hummingboard-usbotg-id { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 + >; + }; + + pinctrl_h100_usbotg_vbus: hummingboard-usbotg-vbus { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; + + pinctrl_h100_usdhc2: h100-usdhc2 { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 + >; + }; + + pinctrl_h100_usdhc2_100mhz: h100-usdhc2-100mhz { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_h100_usdhc2_200mhz: h100-usdhc2-200mhz { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + >; + }; + }; +}; + +&mipi_csi { + status = "okay"; + + port@0 { + mipi_csi2_in: endpoint { + remote-endpoint = <&tc358743_out>; + data-lanes = <1 2 3 4>; + clock-lanes = <0>; + clock-noncontinuous; + link-frequencies = /bits/ 64 <297000000>; + }; + }; +}; + +&ssi1 { + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_h100_uart2>; + status = "okay"; +}; + +&usbh1 { + disable-over-current; + vbus-supply = <®_usbh1_vbus>; + status = "okay"; +}; + +&usbotg { + disable-over-current; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_h100_usbotg_id>; + vbus-supply = <®_usbotg_vbus>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_h100_usdhc2>; + pinctrl-1 = <&pinctrl_h100_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_h100_usdhc2_200mhz>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_nvcc_sd2>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index 1926b1348a62..d7c8ccb2da95 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -191,7 +191,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; - reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts new file mode 100644 index 000000000000..61990630a748 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts @@ -0,0 +1,197 @@ +/* + * Copyright 2013 CompuLab Ltd. + * Copyright 2016 Christopher Spinrath + * + * Based on the devicetree distributed with the vendor kernel for the + * Utilite Pro: + * Copyright 2013 CompuLab Ltd. + * Author: Valentin Raevsky <valentin@compulab.co.il> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/input/input.h> +#include "imx6q-cm-fx6.dts" + +/ { + model = "CompuLab Utilite Pro"; + compatible = "compulab,utilite-pro", "compulab,cm-fx6", "fsl,imx6q"; + + aliases { + ethernet1 = ð1; + rtc0 = &em3027; + rtc1 = &snvs_rtc; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + power { + label = "Power Button"; + gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + }; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + eeprom@50 { + compatible = "at24,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + em3027: rtc@56 { + compatible = "emmicro,em3027"; + reg = <0x56>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&iomuxc { + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9 + >; + }; +}; + +&pcie { + pcie@0,0 { + reg = <0x000000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + + /* non-removable i211 ethernet card */ + eth1: intel,i211@pcie0,0 { + reg = <0x010000 0 0 0 0>; + }; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + no-1-8-v; + broken-cd; + keep-power-in-suspend; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 922b1dd06fda..315e033ff1d8 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -423,7 +423,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>; fsl,dte-mode; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "disabled"; }; @@ -431,7 +431,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2_dte>; fsl,dte-mode; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi index 865c9a264a43..edbce222c782 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi @@ -254,7 +254,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3 &pinctrl_gsm>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi index ecbc6eba6a2c..54f4f0193f2b 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi @@ -143,14 +143,14 @@ &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; &uart5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index 7d81100e7d47..7fff02c406f2 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -351,7 +351,7 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; @@ -364,7 +364,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi index 86460e46d055..3d62401dbd7f 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi @@ -143,7 +143,7 @@ &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index e456b5cc1b03..cfd50ea1ed48 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -250,6 +250,7 @@ txd3-skew-ps = <0>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + fsl,err006687-workaround-present; status = "okay"; }; @@ -591,7 +592,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index 657da6b6ccd2..9677bf323823 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -385,6 +385,7 @@ txd3-skew-ps = <0>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + fsl,err006687-workaround-present; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 73915db704a0..97d9c333902b 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -287,6 +287,7 @@ txd3-skew-ps = <0>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + fsl,err006687-workaround-present; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index d354d406954d..6aa193fb283f 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -155,6 +155,7 @@ phy-mode = "rgmii"; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + fsl,err006687-workaround-present; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index c47fe6c79b36..f65fdfc2536d 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -273,6 +273,7 @@ txd3-skew-ps = <0>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + fsl,err006687-workaround-present; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 5248e7bd2b06..d77ea9423bbc 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -501,6 +501,12 @@ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 >; }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b0 + >; + }; }; gpio_leds { @@ -533,7 +539,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; - reset-gpio = <&gpio7 12 0>; + reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -596,3 +602,14 @@ no-1-8-v; status = "okay"; }; + +&wdog1 { + status = "disabled"; +}; + +&wdog2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index 39b85aef93e1..ac9529f85593 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -689,21 +689,21 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index 8e7c40e114dd..3ffe00c557f1 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -211,6 +211,7 @@ phy-reset-gpios = <&gpio3 29 0>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + fsl,err006687-workaround-present; status = "okay"; }; @@ -233,7 +234,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index ed613ebe0812..b620ac884cfd 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -185,6 +185,7 @@ cache-level = <2>; arm,tag-latency = <4 2 3>; arm,data-latency = <4 2 3>; + arm,shared-override; }; pcie: pcie@0x01000000 { @@ -1100,6 +1101,7 @@ ocotp: ocotp@021bc000 { compatible = "fsl,imx6q-ocotp", "syscon"; reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6QDL_CLK_IIM>; }; tzasc@021d0000 { /* TZASC1 */ @@ -1255,7 +1257,7 @@ #size-cells = <0>; reg = <3>; - ipu1_di0_disp1: disp1-endpoint { + ipu1_di1_disp1: disp1-endpoint { }; ipu1_di1_hdmi: hdmi-endpoint { diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts index 058bcdceb81a..72c7745f51d3 100644 --- a/arch/arm/boot/dts/imx6sl-warp.dts +++ b/arch/arm/boot/dts/imx6sl-warp.dts @@ -84,7 +84,7 @@ &uart5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index d12b250342a6..542515089b1e 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -461,7 +461,7 @@ <0 54 IRQ_TYPE_LEVEL_HIGH>, <0 127 IRQ_TYPE_LEVEL_HIGH>; - regulator-1p1@110 { + regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <800000>; @@ -475,7 +475,7 @@ anatop-max-voltage = <1375000>; }; - regulator-3p0@120 { + regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; @@ -489,7 +489,7 @@ anatop-max-voltage = <3400000>; }; - regulator-2p5@130 { + regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2100000>; @@ -503,7 +503,7 @@ anatop-max-voltage = <2850000>; }; - reg_arm: regulator-vddcore@140 { + reg_arm: regulator-vddcore { compatible = "fsl,anatop-regulator"; regulator-name = "vddarm"; regulator-min-microvolt = <725000>; @@ -520,7 +520,7 @@ anatop-max-voltage = <1450000>; }; - reg_pu: regulator-vddpu@140 { + reg_pu: regulator-vddpu { compatible = "fsl,anatop-regulator"; regulator-name = "vddpu"; regulator-min-microvolt = <725000>; @@ -537,7 +537,7 @@ anatop-max-voltage = <1450000>; }; - reg_soc: regulator-vddsoc@140 { + reg_soc: regulator-vddsoc { compatible = "fsl,anatop-regulator"; regulator-name = "vddsoc"; regulator-min-microvolt = <725000>; @@ -853,6 +853,7 @@ ocotp: ocotp@021bc000 { compatible = "fsl,imx6sl-ocotp", "syscon"; reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6SL_CLK_OCOTP>; }; audmux: audmux@021d8000 { diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index ba62348d8284..9b817f3501a6 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -326,7 +326,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index e5eafe4d9a70..9d70cfd40aff 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -273,7 +273,7 @@ &uart5 { /* for bluetooth */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; @@ -322,6 +322,12 @@ status = "okay"; }; +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + &iomuxc { imx6x-sdb { pinctrl_audmux: audmuxgrp { @@ -588,5 +594,11 @@ MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */ >; }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0 + >; + }; }; }; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 6a993bfda248..2863c52be6f5 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -547,7 +547,7 @@ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - regulator-1p1@110 { + regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <800000>; @@ -561,7 +561,7 @@ anatop-max-voltage = <1375000>; }; - regulator-3p0@120 { + regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; @@ -575,7 +575,7 @@ anatop-max-voltage = <3400000>; }; - regulator-2p5@130 { + regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2100000>; @@ -589,7 +589,7 @@ anatop-max-voltage = <2875000>; }; - reg_arm: regulator-vddcore@140 { + reg_arm: regulator-vddcore { compatible = "fsl,anatop-regulator"; regulator-name = "vddarm"; regulator-min-microvolt = <725000>; @@ -606,7 +606,7 @@ anatop-max-voltage = <1450000>; }; - reg_pcie: regulator-vddpcie@140 { + reg_pcie: regulator-vddpcie { compatible = "fsl,anatop-regulator"; regulator-name = "vddpcie"; regulator-min-microvolt = <725000>; @@ -622,7 +622,7 @@ anatop-max-voltage = <1450000>; }; - reg_soc: regulator-vddsoc@140 { + reg_soc: regulator-vddsoc { compatible = "fsl,anatop-regulator"; regulator-name = "vddsoc"; regulator-min-microvolt = <725000>; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts index 668a72997590..e281d5087d4a 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts @@ -22,6 +22,14 @@ reg = <0x80000000 0x20000000>; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -125,6 +133,46 @@ }; }; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat + &pinctrl_lcdif_ctrl>; + display = <&display0>; + status = "okay"; + + display0: display { + bits-per-pixel = <16>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + + timing0: timing0 { + clock-frequency = <9200000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <8>; + hback-porch = <4>; + hsync-len = <41>; + vback-porch = <2>; + vfront-porch = <4>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + &qspi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_qspi>; @@ -146,6 +194,7 @@ <&clks IMX6UL_CLK_SAI2>; assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; assigned-clock-rates = <0>, <12288000>; + fsl,sai-mclk-direction-output; status = "okay"; }; @@ -171,7 +220,7 @@ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; @@ -207,6 +256,12 @@ status = "okay"; }; +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + &iomuxc { pinctrl-names = "default"; @@ -435,4 +490,10 @@ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 >; }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0 + >; + }; }; diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts index 8ce1fec36e86..86f68faded0e 100644 --- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts +++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts @@ -151,8 +151,8 @@ phy-mode = "rmii"; phy-handle = <ðphy1>; status = "okay"; - phy-reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; - phy-reset-duration = <11>; + phy-reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; + phy-reset-duration = <1>; mdio { #address-cells = <1>; @@ -286,7 +286,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts index d25899b71575..7c5dd1b316ca 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts +++ b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts @@ -146,12 +146,12 @@ &uart1 { pinctrl-0 = <&pinctrl_uart1>; - /delete-property/ fsl,uart-has-rtscts; + /delete-property/ uart-has-rtscts; }; &uart2 { pinctrl-0 = <&pinctrl_uart2>; - /delete-property/ fsl,uart-has-rtscts; + /delete-property/ uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi index 437e9aad5920..530e9ca13a74 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi @@ -563,21 +563,21 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; &uart5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5 &pinctrl_uart5_rtscts>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 4356b655ef02..33b95d78831a 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -36,6 +36,9 @@ serial5 = &uart6; serial6 = &uart7; serial7 = &uart8; + sai1 = &sai1; + sai2 = &sai2; + sai3 = &sai3; spi0 = &ecspi1; spi1 = &ecspi2; spi2 = &ecspi3; @@ -512,7 +515,7 @@ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - reg_3p0: regulator-3p0@120 { + reg_3p0: regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2625000>; @@ -526,7 +529,7 @@ anatop-enable-bit = <0>; }; - reg_arm: regulator-vddcore@140 { + reg_arm: regulator-vddcore { compatible = "fsl,anatop-regulator"; regulator-name = "cpu"; regulator-min-microvolt = <725000>; @@ -543,7 +546,7 @@ anatop-max-voltage = <1450000>; }; - reg_soc: regulator-vddsoc@140 { + reg_soc: regulator-vddsoc { compatible = "fsl,anatop-regulator"; regulator-name = "vddsoc"; regulator-min-microvolt = <725000>; diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi new file mode 100644 index 000000000000..1545661df583 --- /dev/null +++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi @@ -0,0 +1,148 @@ +/* + * Copyright 2016 Toradex AG + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&bl { + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; +}; + +&adc1 { + status = "okay"; +}; + +&adc2 { + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + rtc: m41t0m6@68 { + compatible = "st,m41t00"; + reg = <0x68>; + }; +}; + +&lcdif { + display = <&display0>; + status = "okay"; + + display0: lcd-display { + bits-per-pixel = <16>; + bus-width = <18>; + + display-timings { + native-mode = <&timing_vga>; + + /* Standard VGA timing */ + timing_vga: 640x480 { + clock-frequency = <25175000>; + hactive = <640>; + vactive = <480>; + hback-porch = <40>; + hfront-porch = <24>; + vback-porch = <32>; + vfront-porch = <11>; + hsync-len = <96>; + vsync-len = <2>; + de-active = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbotg1 { + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>; + no-1-8-v; + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi new file mode 100644 index 000000000000..0a9d3a822fc0 --- /dev/null +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -0,0 +1,571 @@ +/* + * Copyright 2016 Toradex AG + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + bl: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vref_1v8: regulator-vref-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vref-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; +}; + +&adc1 { + vref-supply = <®_vref_1v8>; +}; + +&adc2 { + vref-supply = <®_vref_1v8>; +}; + +&cpu0 { + arm-supply = <®_DCDC2>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_50M_CLK>; + clock-names = "ipg", "ahb", "ptp", "enet_clk_ref"; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rmii"; + phy-supply = <®_LDO1>; + fsl,magic-packet; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1 &pinctrl_i2c1_int>; + status = "okay"; + + ad7879@2c { + compatible = "adi,ad7879-1"; + reg = <0x2c>; + interrupt-parent = <&gpio1>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + touchscreen-max-pressure = <4096>; + adi,resistance-plate-x = <120>; + adi,first-conversion-delay = /bits/ 8 <3>; + adi,acquisition-time = /bits/ 8 <1>; + adi,median-filter-size = /bits/ 8 <2>; + adi,averaging = /bits/ 8 <1>; + adi,conversion-interval = /bits/ 8 <255>; + }; + + pmic@33 { + compatible = "ricoh,rn5t567"; + reg = <0x33>; + + regulators { + reg_DCDC1: DCDC1 { /* V1.0_SOC */ + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1125000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_DCDC2: DCDC2 { /* V1.1_ARM */ + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1125000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_DCDC3: DCDC3 { /* V1.8 */ + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <1825000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_DCDC4: DCDC4 { /* V1.35_DRAM */ + regulator-min-microvolt = <1325000>; + regulator-max-microvolt = <1375000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_LDO1: LDO1 { /* PWR_EN_+V3.3_ETH */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_LDO2: LDO2 { /* +V1.8_SD */ + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <3325000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_LDO3: LDO3 { /* PWR_EN_+V3.3_LPSR */ + regulator-min-microvolt = <3275000>; + regulator-max-microvolt = <3325000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_LDO4: LDO4 { /* V1.8_LPSR */ + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <1825000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_LDO5: LDO5 { /* PWR_EN_+V3.3 */ + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <1825000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat + &pinctrl_lcdif_ctrl>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; +}; + +®_1p0d { + vin-supply = <®_DCDC3>; +}; + +&snvs_pwrkey { + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>; + assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + uart-has-rtscts; + fsl,dte-mode; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + uart-has-rtscts; + fsl,dte-mode; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + fsl,dte-mode; +}; + +&usbotg1 { + dr_mode = "host"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4>; + + pinctrl_gpio1: gpio1-grp { + fsl,pins = < + MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x14 /* SODIMM 55 */ + MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x14 /* SODIMM 63 */ + MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0X14 /* SODIMM 73 */ + MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0X14 /* SODIMM 77 */ + MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x14 /* SODIMM 89 */ + MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x14 /* SODIMM 91 */ + MX7D_PAD_LCD_RESET__GPIO3_IO4 0x14 /* SODIMM 93 */ + MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 /* SODIMM 95 */ + MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x14 /* SODIMM 99 */ + MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x14 /* SODIMM 105 */ + MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x14 /* SODIMM 107 */ + MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x14 /* SODIMM 111 */ + MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x14 /* SODIMM 113 */ + MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x14 /* SODIMM 115 */ + MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x14 /* SODIMM 117 */ + MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x14 /* SODIMM 119 */ + MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x14 /* SODIMM 121 */ + MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x14 /* SODIMM 123 */ + MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x14 /* SODIMM 125 */ + MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x14 /* SODIMM 127 */ + MX7D_PAD_UART3_RTS_B__GPIO4_IO6 0x14 /* SODIMM 131 */ + MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x14 /* SODIMM 133 */ + MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x14 /* SODIMM 24 */ + MX7D_PAD_SD2_DATA2__GPIO5_IO16 0x14 /* SODIMM 100 */ + MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x14 /* SODIMM 102 */ + MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x14 /* SODIMM 104 */ + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x14 /* SODIMM 106 */ + MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x14 /* SODIMM 110 */ + MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x14 /* SODIMM 112 */ + MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x14 /* SODIMM 114 */ + MX7D_PAD_EPDC_SDLE__GPIO2_IO17 0x14 /* SODIMM 116 */ + MX7D_PAD_EPDC_SDOE__GPIO2_IO18 0x14 /* SODIMM 118 */ + MX7D_PAD_EPDC_SDSHR__GPIO2_IO19 0x14 /* SODIMM 120 */ + MX7D_PAD_EPDC_SDCE0__GPIO2_IO20 0x14 /* SODIMM 122 */ + MX7D_PAD_EPDC_SDCE1__GPIO2_IO21 0x14 /* SODIMM 124 */ + MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x14 /* SODIMM 126 */ + MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x14 /* SODIMM 128 */ + MX7D_PAD_EPDC_SDCE3__GPIO2_IO23 0x14 /* SODIMM 130 */ + MX7D_PAD_EPDC_GDCLK__GPIO2_IO24 0x14 /* SODIMM 132 */ + MX7D_PAD_EPDC_GDOE__GPIO2_IO25 0x14 /* SODIMM 134 */ + MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x14 /* SODIMM 150 */ + MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x14 /* SODIMM 152 */ + MX7D_PAD_SD2_CLK__GPIO5_IO12 0x14 /* SODIMM 184 */ + MX7D_PAD_SD2_CMD__GPIO5_IO13 0x14 /* SODIMM 186 */ + >; + }; + + pinctrl_gpio2: gpio2-grp { /* On X22 Camera interface */ + fsl,pins = < + MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x14 /* SODIMM 65 */ + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x14 /* SODIMM 69 */ + MX7D_PAD_SD1_WP__GPIO5_IO1 0x14 /* SODIMM 71 */ + MX7D_PAD_I2C4_SDA__GPIO4_IO15 0x14 /* SODIMM 75 */ + MX7D_PAD_ECSPI1_MISO__GPIO4_IO18 0x14 /* SODIMM 79 */ + MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x14 /* SODIMM 81 */ + MX7D_PAD_ECSPI2_MISO__GPIO4_IO22 0x14 /* SODIMM 85 */ + MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x14 /* SODIMM 97 */ + MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x14 /* SODIMM 101 */ + MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17 0x14 /* SODIMM 103 */ + MX7D_PAD_I2C3_SDA__GPIO4_IO13 0x14 /* SODIMM 94 */ + MX7D_PAD_I2C4_SCL__GPIO4_IO14 0x14 /* SODIMM 96 */ + MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* SODIMM 98 */ + >; + }; + + pinctrl_gpio3: gpio3-grp { /* LCD 18-23 */ + fsl,pins = < + MX7D_PAD_LCD_DATA18__GPIO3_IO23 0x14 /* SODIMM 136 */ + MX7D_PAD_LCD_DATA19__GPIO3_IO24 0x14 /* SODIMM 138 */ + MX7D_PAD_LCD_DATA20__GPIO3_IO25 0x14 /* SODIMM 140 */ + MX7D_PAD_LCD_DATA21__GPIO3_IO26 0x14 /* SODIMM 142 */ + MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x14 /* SODIMM 146 */ + MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x14 /* SODIMM 148 */ + >; + }; + + pinctrl_gpio4: gpio4-grp { /* Alternatively CAN2 */ + fsl,pins = < + MX7D_PAD_GPIO1_IO15__GPIO1_IO15 0x14 /* SODIMM 178 */ + MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x14 /* SODIMM 188 */ + >; + }; + + pinctrl_i2c1_int: i2c1-int-grp { /* PMIC / TOUCH */ + fsl,pins = < + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x79 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x14 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x73 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x73 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x73 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER 0x73 + + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x73 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x73 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x73 + MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x73 + MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3 + MX7D_PAD_SD2_WP__ENET1_MDC 0x3 + >; + }; + + pinctrl_ecspi3_cs: ecspi3-cs-grp { + fsl,pins = < + MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x14 + >; + }; + + pinctrl_ecspi3: ecspi3-grp { + fsl,pins = < + MX7D_PAD_I2C1_SCL__ECSPI3_MISO 0x2 + MX7D_PAD_I2C1_SDA__ECSPI3_MOSI 0x2 + MX7D_PAD_I2C2_SCL__ECSPI3_SCLK 0x2 + >; + }; + + pinctrl_flexcan2: flexcan2-grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59 + MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x59 + >; + }; + + pinctrl_gpmi_nand: gpmi-nand-grp { + fsl,pins = < + MX7D_PAD_SD3_CLK__NAND_CLE 0x71 + MX7D_PAD_SD3_CMD__NAND_ALE 0x71 + MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B 0x71 + MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B 0x71 + MX7D_PAD_SAI1_TX_DATA__NAND_READY_B 0x74 + MX7D_PAD_SD3_STROBE__NAND_RE_B 0x71 + MX7D_PAD_SD3_RESET_B__NAND_WE_B 0x71 + MX7D_PAD_SD3_DATA0__NAND_DATA00 0x71 + MX7D_PAD_SD3_DATA1__NAND_DATA01 0x71 + MX7D_PAD_SD3_DATA2__NAND_DATA02 0x71 + MX7D_PAD_SD3_DATA3__NAND_DATA03 0x71 + MX7D_PAD_SD3_DATA4__NAND_DATA04 0x71 + MX7D_PAD_SD3_DATA5__NAND_DATA05 0x71 + MX7D_PAD_SD3_DATA6__NAND_DATA06 0x71 + MX7D_PAD_SD3_DATA7__NAND_DATA07 0x71 + >; + }; + + pinctrl_i2c4: i2c4-grp { + fsl,pins = < + MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA 0x4000007f + MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL 0x4000007f + >; + }; + + pinctrl_lcdif_dat: lcdif-dat-grp { + fsl,pins = < + MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 + MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79 + MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79 + MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79 + MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79 + MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79 + MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79 + MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79 + MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79 + MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79 + MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79 + MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79 + MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79 + MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79 + MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79 + MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79 + MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79 + MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79 + >; + }; + + pinctrl_lcdif_dat_24: lcdif-dat-24-grp { + fsl,pins = < + MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79 + MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79 + MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79 + MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79 + MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79 + MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79 + >; + }; + + pinctrl_lcdif_ctrl: lcdif-ctrl-grp { + fsl,pins = < + MX7D_PAD_LCD_CLK__LCD_CLK 0x79 + MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79 + MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79 + MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79 + >; + }; + + pinctrl_pwm1: pwm1-grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x79 + >; + }; + + pinctrl_pwm2: pwm2-grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x79 + >; + }; + + pinctrl_pwm3: pwm3-grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x79 + >; + }; + + pinctrl_pwm4: pwm4-grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x79 + >; + }; + + pinctrl_uart1: uart1-grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX 0x79 + MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX 0x79 + MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS 0x79 + MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS 0x79 + >; + }; + + pinctrl_uart1_ctrl1: uart1-ctrl1-grp { + fsl,pins = < + MX7D_PAD_SD2_DATA1__GPIO5_IO15 0x14 /* DCD */ + MX7D_PAD_SD2_DATA0__GPIO5_IO14 0x14 /* DTR */ + >; + }; + + pinctrl_uart2: uart2-grp { + fsl,pins = < + MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x79 + MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x79 + MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS 0x79 + MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS 0x79 + >; + }; + pinctrl_uart3: uart3-grp { + fsl,pins = < + MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX 0x79 + MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x79 + >; + }; + + pinctrl_usbotg2_reg: gpio-usbotg2-vbus { + fsl,pins = < + MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 /* SODIMM 129 USBH PEN */ + >; + }; + + pinctrl_usdhc1: usdhc1-grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + >; + }; + + pinctrl_sai1: sai1-grp { + fsl,pins = < + MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f + MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f + MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x1f + MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30 + MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f + >; + }; +}; + +&iomuxc_lpsr { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_lpsr>; + + pinctrl_gpio_lpsr: gpio1-grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO01__GPIO1_IO1 0x59 + MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x59 + MX7D_PAD_GPIO1_IO03__GPIO1_IO3 0x59 + >; + }; + + pinctrl_i2c1: i2c1-grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO05__I2C1_SDA 0x4000007f + MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x4000007f + >; + }; + + pinctrl_cd_usdhc1: usdhc1-cd-grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO00__GPIO1_IO0 0x59 /* CD */ + >; + }; + + pinctrl_uart1_ctrl2: uart1-ctrl2-grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x14 /* DSR */ + MX7D_PAD_GPIO1_IO06__GPIO1_IO6 0x14 /* RI */ + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts index 48634519d13a..58b09bf1ba2d 100644 --- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts @@ -12,7 +12,6 @@ /dts-v1/; -#include <dt-bindings/input/input.h> #include "imx7d.dtsi" / { diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts new file mode 100644 index 000000000000..bd01d2cc642d --- /dev/null +++ b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts @@ -0,0 +1,66 @@ +/* + * Copyright 2016 Toradex AG + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx7d-colibri.dtsi" +#include "imx7-colibri-eval-v3.dtsi" + +/ { + model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3"; + compatible = "toradex,colibri-imx7d-eval-v3", "toradex,colibri-imx7d", + "fsl,imx7d"; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; + }; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi new file mode 100644 index 000000000000..3c2cb502b388 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-colibri.dtsi @@ -0,0 +1,54 @@ +/* + * Copyright 2016 Toradex AG + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx7d.dtsi" +#include "imx7-colibri.dtsi" + +/ { + memory { + reg = <0x80000000 0x20000000>; + }; +}; + +&usbotg2 { + dr_mode = "host"; +}; diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index 1ce97800f0c5..ce08f180f213 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -42,7 +42,6 @@ /dts-v1/; -#include <dt-bindings/input/input.h> #include "imx7d.dtsi" / { @@ -392,7 +391,7 @@ pinctrl-0 = <&pinctrl_uart6>; assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h index eeda78347619..3f9f0d9c8094 100644 --- a/arch/arm/boot/dts/imx7d-pinfunc.h +++ b/arch/arm/boot/dts/imx7d-pinfunc.h @@ -594,7 +594,7 @@ #define MX7D_PAD_UART2_RX_DATA__GPIO4_IO2 0x0130 0x03A0 0x0000 0x5 0x0 #define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO 0x0130 0x03A0 0x0000 0x6 0x0 #define MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x0134 0x03A4 0x0000 0x0 0x0 -#define MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x0134 0x03A4 0x0000 0x0 0x0 +#define MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x0134 0x03A4 0x06FC 0x0 0x3 #define MX7D_PAD_UART2_TX_DATA__I2C2_SDA 0x0134 0x03A4 0x05E0 0x1 0x0 #define MX7D_PAD_UART2_TX_DATA__SAI3_RX_DATA0 0x0134 0x03A4 0x06C8 0x2 0x0 #define MX7D_PAD_UART2_TX_DATA__ECSPI1_RDY 0x0134 0x03A4 0x0000 0x3 0x0 diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index b267f79e3059..95ee268ed510 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -42,7 +42,6 @@ /dts-v1/; -#include <dt-bindings/input/input.h> #include "imx7d.dtsi" / { @@ -111,6 +110,32 @@ arm-supply = <&sw1a_reg>; }; +&ecspi3 { + fsl,spi-num-chipselects = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; + status = "okay"; + + tsc2046@0 { + compatible = "ti,tsc2046"; + reg = <0>; + spi-max-frequency = <1000000>; + pinctrl-names ="default"; + pinctrl-0 = <&pinctrl_tsc2046_pendown>; + interrupt-parent = <&gpio2>; + interrupts = <29 0>; + pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>; + ti,x-min = /bits/ 16 <0>; + ti,x-max = /bits/ 16 <0>; + ti,y-min = /bits/ 16 <0>; + ti,y-max = /bits/ 16 <0>; + ti,pressure-max = /bits/ 16 <0>; + ti,x-plat-ohms = /bits/ 16 <400>; + wakeup-source; + }; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; @@ -272,6 +297,44 @@ }; }; +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif>; + display = <&display0>; + status = "okay"; + + display0: display { + bits-per-pixel = <16>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + + timing0: timing0 { + clock-frequency = <9200000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <8>; + hback-porch = <4>; + hsync-len = <41>; + vback-porch = <2>; + vfront-porch = <4>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -314,11 +377,26 @@ status = "okay"; }; +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; imx7d-sdb { + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO 0x2 + MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI 0x2 + MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK 0x2 + MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x59 + >; + }; + pinctrl_enet1: enet1grp { fsl,pins = < MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3 @@ -390,6 +468,52 @@ >; }; + pinctrl_lcdif: lcdifgrp { + fsl,pins = < + MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 + MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79 + MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79 + MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79 + MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79 + MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79 + MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79 + MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79 + MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79 + MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79 + MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79 + MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79 + MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79 + MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79 + MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79 + MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79 + MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79 + MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79 + MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79 + MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79 + MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79 + MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79 + MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79 + MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79 + MX7D_PAD_LCD_CLK__LCD_CLK 0x79 + MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79 + MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79 + MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79 + MX7D_PAD_LCD_RESET__LCD_RESET 0x79 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x110b0 + >; + }; + + pinctrl_tsc2046_pendown: tsc2046_pendown { + fsl,pins = < + MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x59 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 @@ -512,5 +636,10 @@ >; }; + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x74 + >; + }; }; }; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 6b3faa298417..51c13cbdffb7 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -1,5 +1,6 @@ /* * Copyright 2015 Freescale Semiconductor, Inc. + * Copyright 2016 Toradex AG * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -40,54 +41,10 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include <dt-bindings/clock/imx7d-clock.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include "imx7d-pinfunc.h" -#include "skeleton.dtsi" +#include "imx7s.dtsi" / { - aliases { - gpio0 = &gpio1; - gpio1 = &gpio2; - gpio2 = &gpio3; - gpio3 = &gpio4; - gpio4 = &gpio5; - gpio5 = &gpio6; - gpio6 = &gpio7; - i2c0 = &i2c1; - i2c1 = &i2c2; - i2c2 = &i2c3; - i2c3 = &i2c4; - mmc0 = &usdhc1; - mmc1 = &usdhc2; - mmc2 = &usdhc3; - serial0 = &uart1; - serial1 = &uart2; - serial2 = &uart3; - serial3 = &uart4; - serial4 = &uart5; - serial5 = &uart6; - serial6 = &uart7; - }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - compatible = "arm,cortex-a7"; - device_type = "cpu"; - reg = <0>; - operating-points = < - /* KHz uV */ - 996000 1075000 - 792000 975000 - >; - clock-latency = <61036>; /* two CLK32 periods */ - clocks = <&clks IMX7D_CLK_ARM>; - }; - cpu1: cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; @@ -95,221 +52,6 @@ }; }; - intc: interrupt-controller@31001000 { - compatible = "arm,cortex-a7-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x31001000 0x1000>, - <0x31002000 0x1000>, - <0x31004000 0x2000>, - <0x31006000 0x2000>; - }; - - ckil: clock-cki { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "ckil"; - }; - - osc: clock-osc { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "osc"; - }; - - timer { - compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - interrupt-parent = <&intc>; - }; - - etr@30086000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0x30086000 0x1000>; - clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; - clock-names = "apb_pclk"; - - port { - etr_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port1>; - }; - }; - }; - - tpiu@30087000 { - compatible = "arm,coresight-tpiu", "arm,primecell"; - reg = <0x30087000 0x1000>; - clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; - clock-names = "apb_pclk"; - - port { - tpiu_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port1>; - }; - }; - }; - - replicator { - /* - * non-configurable replicators don't show up on the - * AMBA bus. As such no need to add "arm,primecell" - */ - compatible = "arm,coresight-replicator"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* replicator output ports */ - port@0 { - reg = <0>; - replicator_out_port0: endpoint { - remote-endpoint = <&tpiu_in_port>; - }; - }; - - port@1 { - reg = <1>; - replicator_out_port1: endpoint { - remote-endpoint = <&etr_in_port>; - }; - }; - - /* replicator input port */ - port@2 { - reg = <0>; - replicator_in_port0: endpoint { - slave-mode; - remote-endpoint = <&etf_out_port>; - }; - }; - }; - }; - - etf@30084000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0x30084000 0x1000>; - clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; - clock-names = "apb_pclk"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - etf_in_port: endpoint { - slave-mode; - remote-endpoint = <&hugo_funnel_out_port0>; - }; - }; - - port@1 { - reg = <0>; - etf_out_port: endpoint { - remote-endpoint = <&replicator_in_port0>; - }; - }; - }; - }; - - funnel@30083000 { - compatible = "arm,coresight-funnel", "arm,primecell"; - reg = <0x30083000 0x1000>; - clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; - clock-names = "apb_pclk"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel input ports */ - port@0 { - reg = <0>; - hugo_funnel_in_port0: endpoint { - slave-mode; - remote-endpoint = <&ca_funnel_out_port0>; - }; - }; - - port@1 { - reg = <1>; - hugo_funnel_in_port1: endpoint { - slave-mode; /* M4 input */ - }; - }; - - port@2 { - reg = <0>; - hugo_funnel_out_port0: endpoint { - remote-endpoint = <&etf_in_port>; - }; - }; - - /* the other input ports are not connect to anything */ - }; - }; - - funnel@30041000 { - compatible = "arm,coresight-funnel", "arm,primecell"; - reg = <0x30041000 0x1000>; - clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; - clock-names = "apb_pclk"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel input ports */ - port@0 { - reg = <0>; - ca_funnel_in_port0: endpoint { - slave-mode; - remote-endpoint = <&etm0_out_port>; - }; - }; - - port@1 { - reg = <1>; - ca_funnel_in_port1: endpoint { - slave-mode; - remote-endpoint = <&etm1_out_port>; - }; - }; - - /* funnel output port */ - port@2 { - reg = <0>; - ca_funnel_out_port0: endpoint { - remote-endpoint = <&hugo_funnel_in_port0>; - }; - }; - - /* the other input ports are not connect to anything */ - }; - }; - - etm@3007c000 { - compatible = "arm,coresight-etm3x", "arm,primecell"; - reg = <0x3007c000 0x1000>; - cpu = <&cpu0>; - clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; - clock-names = "apb_pclk"; - - port { - etm0_out_port: endpoint { - remote-endpoint = <&ca_funnel_in_port0>; - }; - }; - }; - etm@3007d000 { compatible = "arm,coresight-etm3x", "arm,primecell"; reg = <0x3007d000 0x1000>; @@ -330,626 +72,57 @@ }; }; }; +}; - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&intc>; - ranges; - - aips1: aips-bus@30000000 { - compatible = "fsl,aips-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x30000000 0x400000>; - ranges; - - gpio1: gpio@30200000 { - compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; - reg = <0x30200000 0x10000>; - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */ - <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */ - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@30210000 { - compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; - reg = <0x30210000 0x10000>; - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio3: gpio@30220000 { - compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; - reg = <0x30220000 0x10000>; - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio4: gpio@30230000 { - compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; - reg = <0x30230000 0x10000>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio5: gpio@30240000 { - compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; - reg = <0x30240000 0x10000>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio6: gpio@30250000 { - compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; - reg = <0x30250000 0x10000>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio7: gpio@30260000 { - compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; - reg = <0x30260000 0x10000>; - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - wdog1: wdog@30280000 { - compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; - reg = <0x30280000 0x10000>; - interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_WDOG1_ROOT_CLK>; - }; - - wdog2: wdog@30290000 { - compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; - reg = <0x30290000 0x10000>; - interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_WDOG2_ROOT_CLK>; - status = "disabled"; - }; - - wdog3: wdog@302a0000 { - compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; - reg = <0x302a0000 0x10000>; - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_WDOG3_ROOT_CLK>; - status = "disabled"; - }; - - wdog4: wdog@302b0000 { - compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; - reg = <0x302b0000 0x10000>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_WDOG4_ROOT_CLK>; - status = "disabled"; - }; - - iomuxc_lpsr: iomuxc-lpsr@302c0000 { - compatible = "fsl,imx7d-iomuxc-lpsr"; - reg = <0x302c0000 0x10000>; - fsl,input-sel = <&iomuxc>; - }; - - gpt1: gpt@302d0000 { - compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; - reg = <0x302d0000 0x10000>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_GPT1_ROOT_CLK>; - clock-names = "ipg", "per"; - }; - - gpt2: gpt@302e0000 { - compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; - reg = <0x302e0000 0x10000>; - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_GPT2_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - gpt3: gpt@302f0000 { - compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; - reg = <0x302f0000 0x10000>; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_GPT3_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - gpt4: gpt@30300000 { - compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; - reg = <0x30300000 0x10000>; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_GPT4_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - iomuxc: iomuxc@30330000 { - compatible = "fsl,imx7d-iomuxc"; - reg = <0x30330000 0x10000>; - }; - - gpr: iomuxc-gpr@30340000 { - compatible = "fsl,imx7d-iomuxc-gpr", "syscon"; - reg = <0x30340000 0x10000>; - }; - - ocotp: ocotp-ctrl@30350000 { - compatible = "syscon"; - reg = <0x30350000 0x10000>; - clocks = <&clks IMX7D_CLK_DUMMY>; - status = "disabled"; - }; - - anatop: anatop@30360000 { - compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop", - "syscon", "simple-bus"; - reg = <0x30360000 0x10000>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - - reg_1p0d: regulator-vdd1p0d@210 { - compatible = "fsl,anatop-regulator"; - regulator-name = "vdd1p0d"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1200000>; - anatop-reg-offset = <0x210>; - anatop-vol-bit-shift = <8>; - anatop-vol-bit-width = <5>; - anatop-min-bit-val = <8>; - anatop-min-voltage = <800000>; - anatop-max-voltage = <1200000>; - anatop-enable-bit = <31>; - }; - }; - - snvs: snvs@30370000 { - compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; - reg = <0x30370000 0x10000>; - - snvs_rtc: snvs-rtc-lp { - compatible = "fsl,sec-v4.0-mon-rtc-lp"; - regmap = <&snvs>; - offset = <0x34>; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - }; - - snvs_poweroff: snvs-poweroff { - compatible = "syscon-poweroff"; - regmap = <&snvs>; - offset = <0x38>; - mask = <0x60>; - }; - - snvs_pwrkey: snvs-powerkey { - compatible = "fsl,sec-v4.0-pwrkey"; - regmap = <&snvs>; - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - linux,keycode = <KEY_POWER>; - wakeup-source; - }; - }; - - clks: ccm@30380000 { - compatible = "fsl,imx7d-ccm"; - reg = <0x30380000 0x10000>; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - #clock-cells = <1>; - clocks = <&ckil>, <&osc>; - clock-names = "ckil", "osc"; - }; - - src: src@30390000 { - compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon"; - reg = <0x30390000 0x10000>; - interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; - #reset-cells = <1>; - }; - }; - - aips2: aips-bus@30400000 { - compatible = "fsl,aips-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x30400000 0x400000>; - ranges; - - adc1: adc@30610000 { - compatible = "fsl,imx7d-adc"; - reg = <0x30610000 0x10000>; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_ADC_ROOT_CLK>; - clock-names = "adc"; - status = "disabled"; - }; - - adc2: adc@30620000 { - compatible = "fsl,imx7d-adc"; - reg = <0x30620000 0x10000>; - interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_ADC_ROOT_CLK>; - clock-names = "adc"; - status = "disabled"; - }; - - pwm1: pwm@30660000 { - compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; - reg = <0x30660000 0x10000>; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_PWM1_ROOT_CLK>, - <&clks IMX7D_PWM1_ROOT_CLK>; - clock-names = "ipg", "per"; - #pwm-cells = <2>; - status = "disabled"; - }; - - pwm2: pwm@30670000 { - compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; - reg = <0x30670000 0x10000>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_PWM2_ROOT_CLK>, - <&clks IMX7D_PWM2_ROOT_CLK>; - clock-names = "ipg", "per"; - #pwm-cells = <2>; - status = "disabled"; - }; - - pwm3: pwm@30680000 { - compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; - reg = <0x30680000 0x10000>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_PWM3_ROOT_CLK>, - <&clks IMX7D_PWM3_ROOT_CLK>; - clock-names = "ipg", "per"; - #pwm-cells = <2>; - status = "disabled"; - }; - - pwm4: pwm@30690000 { - compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; - reg = <0x30690000 0x10000>; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_PWM4_ROOT_CLK>, - <&clks IMX7D_PWM4_ROOT_CLK>; - clock-names = "ipg", "per"; - #pwm-cells = <2>; - status = "disabled"; - }; - - lcdif: lcdif@30730000 { - compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif"; - reg = <0x30730000 0x10000>; - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>, - <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>; - clock-names = "pix", "axi", "disp_axi"; - status = "disabled"; - }; - }; - - aips3: aips-bus@30800000 { - compatible = "fsl,aips-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x30800000 0x400000>; - ranges; - - uart1: serial@30860000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart"; - reg = <0x30860000 0x10000>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_UART1_ROOT_CLK>, - <&clks IMX7D_UART1_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart2: serial@30890000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart"; - reg = <0x30890000 0x10000>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_UART2_ROOT_CLK>, - <&clks IMX7D_UART2_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart3: serial@30880000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart"; - reg = <0x30880000 0x10000>; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_UART3_ROOT_CLK>, - <&clks IMX7D_UART3_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - flexcan1: can@30a00000 { - compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan"; - reg = <0x30a00000 0x10000>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CAN1_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - flexcan2: can@30a10000 { - compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan"; - reg = <0x30a10000 0x10000>; - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CAN2_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - i2c1: i2c@30a20000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; - reg = <0x30a20000 0x10000>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_I2C1_ROOT_CLK>; - status = "disabled"; - }; - - i2c2: i2c@30a30000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; - reg = <0x30a30000 0x10000>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_I2C2_ROOT_CLK>; - status = "disabled"; - }; - - i2c3: i2c@30a40000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; - reg = <0x30a40000 0x10000>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_I2C3_ROOT_CLK>; - status = "disabled"; - }; - - i2c4: i2c@30a50000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; - reg = <0x30a50000 0x10000>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_I2C4_ROOT_CLK>; - status = "disabled"; - }; - - uart4: serial@30a60000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart"; - reg = <0x30a60000 0x10000>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_UART4_ROOT_CLK>, - <&clks IMX7D_UART4_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart5: serial@30a70000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart"; - reg = <0x30a70000 0x10000>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_UART5_ROOT_CLK>, - <&clks IMX7D_UART5_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart6: serial@30a80000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart"; - reg = <0x30a80000 0x10000>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_UART6_ROOT_CLK>, - <&clks IMX7D_UART6_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart7: serial@30a90000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart"; - reg = <0x30a90000 0x10000>; - interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_UART7_ROOT_CLK>, - <&clks IMX7D_UART7_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - usbotg1: usb@30b10000 { - compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; - reg = <0x30b10000 0x200>; - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_USB_CTRL_CLK>; - fsl,usbphy = <&usbphynop1>; - fsl,usbmisc = <&usbmisc1 0>; - phy-clkgate-delay-us = <400>; - status = "disabled"; - }; - - usbotg2: usb@30b20000 { - compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; - reg = <0x30b20000 0x200>; - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_USB_CTRL_CLK>; - fsl,usbphy = <&usbphynop2>; - fsl,usbmisc = <&usbmisc2 0>; - phy-clkgate-delay-us = <400>; - status = "disabled"; - }; - - usbh: usb@30b30000 { - compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; - reg = <0x30b30000 0x200>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_USB_CTRL_CLK>; - fsl,usbphy = <&usbphynop3>; - fsl,usbmisc = <&usbmisc3 0>; - phy_type = "hsic"; - dr_mode = "host"; - phy-clkgate-delay-us = <400>; - status = "disabled"; - }; - - usbmisc1: usbmisc@30b10200 { - #index-cells = <1>; - compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; - reg = <0x30b10200 0x200>; - }; - - usbmisc2: usbmisc@30b20200 { - #index-cells = <1>; - compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; - reg = <0x30b20200 0x200>; - }; - - usbmisc3: usbmisc@30b30200 { - #index-cells = <1>; - compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; - reg = <0x30b30200 0x200>; - }; - - usbphynop1: usbphynop1 { - compatible = "usb-nop-xceiv"; - clocks = <&clks IMX7D_USB_PHY1_CLK>; - clock-names = "main_clk"; - }; - - usbphynop2: usbphynop2 { - compatible = "usb-nop-xceiv"; - clocks = <&clks IMX7D_USB_PHY2_CLK>; - clock-names = "main_clk"; - }; - - usbphynop3: usbphynop3 { - compatible = "usb-nop-xceiv"; - clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>; - clock-names = "main_clk"; - }; - - usdhc1: usdhc@30b40000 { - compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; - reg = <0x30b40000 0x10000>; - interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_USDHC1_ROOT_CLK>; - clock-names = "ipg", "ahb", "per"; - bus-width = <4>; - status = "disabled"; - }; +&aips3 { + usbotg2: usb@30b20000 { + compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; + reg = <0x30b20000 0x200>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_USB_CTRL_CLK>; + fsl,usbphy = <&usbphynop2>; + fsl,usbmisc = <&usbmisc2 0>; + phy-clkgate-delay-us = <400>; + status = "disabled"; + }; - usdhc2: usdhc@30b50000 { - compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; - reg = <0x30b50000 0x10000>; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_USDHC2_ROOT_CLK>; - clock-names = "ipg", "ahb", "per"; - bus-width = <4>; - status = "disabled"; - }; + usbmisc2: usbmisc@30b20200 { + #index-cells = <1>; + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x30b20200 0x200>; + }; - usdhc3: usdhc@30b60000 { - compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; - reg = <0x30b60000 0x10000>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_USDHC3_ROOT_CLK>; - clock-names = "ipg", "ahb", "per"; - bus-width = <4>; - status = "disabled"; - }; + usbphynop2: usbphynop2 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_PHY2_CLK>; + clock-names = "main_clk"; + }; - fec1: ethernet@30be0000 { - compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; - reg = <0x30be0000 0x10000>; - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, - <&clks IMX7D_ENET_AXI_ROOT_CLK>, - <&clks IMX7D_ENET1_TIME_ROOT_CLK>, - <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, - <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; - clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref", "enet_out"; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; - status = "disabled"; - }; + fec2: ethernet@30bf0000 { + compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; + reg = <0x30bf0000 0x10000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET2_TIME_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, + <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; + status = "disabled"; + }; +}; - fec2: ethernet@30bf0000 { - compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; - reg = <0x30bf0000 0x10000>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, - <&clks IMX7D_ENET_AXI_ROOT_CLK>, - <&clks IMX7D_ENET2_TIME_ROOT_CLK>, - <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, - <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; - clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref", "enet_out"; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; - status = "disabled"; - }; +&ca_funnel_ports { + port@1 { + reg = <1>; + ca_funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = <&etm1_out_port>; }; }; }; diff --git a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts new file mode 100644 index 000000000000..bd2a49c1ade6 --- /dev/null +++ b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts @@ -0,0 +1,51 @@ +/* + * Copyright 2016 Toradex AG + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx7s-colibri.dtsi" +#include "imx7-colibri-eval-v3.dtsi" + +/ { + model = "Toradex Colibri iMX7S on Colibri Evaluation Board V3"; + compatible = "toradex,colibri-imx7s-eval-v3", "toradex,colibri-imx7s", + "fsl,imx7s"; +}; diff --git a/arch/arm/boot/dts/imx7s-colibri.dtsi b/arch/arm/boot/dts/imx7s-colibri.dtsi new file mode 100644 index 000000000000..b81013455b21 --- /dev/null +++ b/arch/arm/boot/dts/imx7s-colibri.dtsi @@ -0,0 +1,50 @@ +/* + * Copyright 2016 Toradex AG + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx7s.dtsi" +#include "imx7-colibri.dtsi" + +/ { + memory { + reg = <0x80000000 0x10000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi new file mode 100644 index 000000000000..1e90bdbe3a6e --- /dev/null +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -0,0 +1,933 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * Copyright 2016 Toradex AG + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/clock/imx7d-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "imx7d-pinfunc.h" +#include "skeleton.dtsi" + +/ { + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + serial6 = &uart7; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + spi3 = &ecspi4; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + operating-points = < + /* KHz uV */ + 996000 1075000 + 792000 975000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX7D_CLK_ARM>; + }; + }; + + intc: interrupt-controller@31001000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x31001000 0x1000>, + <0x31002000 0x1000>, + <0x31004000 0x2000>, + <0x31006000 0x2000>; + }; + + ckil: clock-cki { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ckil"; + }; + + osc: clock-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc"; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&intc>; + }; + + etr@30086000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x30086000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + port { + etr_in_port: endpoint { + slave-mode; + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + + tpiu@30087000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0x30087000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + port { + tpiu_in_port: endpoint { + slave-mode; + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + + replicator { + /* + * non-configurable replicators don't show up on the + * AMBA bus. As such no need to add "arm,primecell" + */ + compatible = "arm,coresight-replicator"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + replicator_out_port0: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + + port@1 { + reg = <1>; + replicator_out_port1: endpoint { + remote-endpoint = <&etr_in_port>; + }; + }; + + /* replicator input port */ + port@2 { + reg = <0>; + replicator_in_port0: endpoint { + slave-mode; + remote-endpoint = <&etf_out_port>; + }; + }; + }; + }; + + etf@30084000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x30084000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + etf_in_port: endpoint { + slave-mode; + remote-endpoint = <&hugo_funnel_out_port0>; + }; + }; + + port@1 { + reg = <0>; + etf_out_port: endpoint { + remote-endpoint = <&replicator_in_port0>; + }; + }; + }; + }; + + funnel@30083000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0x30083000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel input ports */ + port@0 { + reg = <0>; + hugo_funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&ca_funnel_out_port0>; + }; + }; + + port@1 { + reg = <1>; + hugo_funnel_in_port1: endpoint { + slave-mode; /* M4 input */ + }; + }; + + port@2 { + reg = <0>; + hugo_funnel_out_port0: endpoint { + remote-endpoint = <&etf_in_port>; + }; + }; + + /* the other input ports are not connect to anything */ + }; + }; + + funnel@30041000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0x30041000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + ca_funnel_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel input ports */ + port@0 { + reg = <0>; + ca_funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&etm0_out_port>; + }; + }; + + /* funnel output port */ + port@2 { + reg = <0>; + ca_funnel_out_port0: endpoint { + remote-endpoint = <&hugo_funnel_in_port0>; + }; + }; + + /* the other input ports are not connect to anything */ + }; + }; + + etm@3007c000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x3007c000 0x1000>; + cpu = <&cpu0>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + port { + etm0_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port0>; + }; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + ranges; + + aips1: aips-bus@30000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30000000 0x400000>; + ranges; + + gpio1: gpio@30200000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30200000 0x10000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */ + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@30210000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30210000 0x10000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@30220000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30220000 0x10000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@30230000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30230000 0x10000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@30240000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30240000 0x10000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio@30250000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30250000 0x10000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio7: gpio@30260000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30260000 0x10000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wdog1: wdog@30280000 { + compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; + reg = <0x30280000 0x10000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_WDOG1_ROOT_CLK>; + }; + + wdog2: wdog@30290000 { + compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; + reg = <0x30290000 0x10000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_WDOG2_ROOT_CLK>; + status = "disabled"; + }; + + wdog3: wdog@302a0000 { + compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; + reg = <0x302a0000 0x10000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_WDOG3_ROOT_CLK>; + status = "disabled"; + }; + + wdog4: wdog@302b0000 { + compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; + reg = <0x302b0000 0x10000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_WDOG4_ROOT_CLK>; + status = "disabled"; + }; + + iomuxc_lpsr: iomuxc-lpsr@302c0000 { + compatible = "fsl,imx7d-iomuxc-lpsr"; + reg = <0x302c0000 0x10000>; + fsl,input-sel = <&iomuxc>; + }; + + gpt1: gpt@302d0000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + reg = <0x302d0000 0x10000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_GPT1_ROOT_CLK>; + clock-names = "ipg", "per"; + }; + + gpt2: gpt@302e0000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + reg = <0x302e0000 0x10000>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_GPT2_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + gpt3: gpt@302f0000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + reg = <0x302f0000 0x10000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_GPT3_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + gpt4: gpt@30300000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + reg = <0x30300000 0x10000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_GPT4_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + iomuxc: iomuxc@30330000 { + compatible = "fsl,imx7d-iomuxc"; + reg = <0x30330000 0x10000>; + }; + + gpr: iomuxc-gpr@30340000 { + compatible = "fsl,imx7d-iomuxc-gpr", "syscon"; + reg = <0x30340000 0x10000>; + }; + + ocotp: ocotp-ctrl@30350000 { + compatible = "syscon"; + reg = <0x30350000 0x10000>; + clocks = <&clks IMX7D_CLK_DUMMY>; + status = "disabled"; + }; + + anatop: anatop@30360000 { + compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop", + "syscon", "simple-bus"; + reg = <0x30360000 0x10000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + + reg_1p0d: regulator-vdd1p0d { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd1p0d"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + anatop-reg-offset = <0x210>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <8>; + anatop-min-voltage = <800000>; + anatop-max-voltage = <1200000>; + anatop-enable-bit = <31>; + }; + }; + + snvs: snvs@30370000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x30370000 0x10000>; + + snvs_rtc: snvs-rtc-lp { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap = <&snvs>; + offset = <0x34>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + }; + + snvs_poweroff: snvs-poweroff { + compatible = "syscon-poweroff"; + regmap = <&snvs>; + offset = <0x38>; + mask = <0x60>; + }; + + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + linux,keycode = <KEY_POWER>; + wakeup-source; + }; + }; + + clks: ccm@30380000 { + compatible = "fsl,imx7d-ccm"; + reg = <0x30380000 0x10000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>; + clock-names = "ckil", "osc"; + }; + + src: src@30390000 { + compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon"; + reg = <0x30390000 0x10000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + }; + }; + + aips2: aips-bus@30400000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30400000 0x400000>; + ranges; + + adc1: adc@30610000 { + compatible = "fsl,imx7d-adc"; + reg = <0x30610000 0x10000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ADC_ROOT_CLK>; + clock-names = "adc"; + status = "disabled"; + }; + + adc2: adc@30620000 { + compatible = "fsl,imx7d-adc"; + reg = <0x30620000 0x10000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ADC_ROOT_CLK>; + clock-names = "adc"; + status = "disabled"; + }; + + ecspi4: ecspi@30630000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; + reg = <0x30630000 0x10000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>, + <&clks IMX7D_ECSPI4_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + pwm1: pwm@30660000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30660000 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PWM1_ROOT_CLK>, + <&clks IMX7D_PWM1_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@30670000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30670000 0x10000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PWM2_ROOT_CLK>, + <&clks IMX7D_PWM2_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@30680000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30680000 0x10000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PWM3_ROOT_CLK>, + <&clks IMX7D_PWM3_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@30690000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30690000 0x10000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PWM4_ROOT_CLK>, + <&clks IMX7D_PWM4_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + lcdif: lcdif@30730000 { + compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif"; + reg = <0x30730000 0x10000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>, + <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CLK_DUMMY>; + clock-names = "pix", "axi", "disp_axi"; + status = "disabled"; + }; + }; + + aips3: aips-bus@30800000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30800000 0x400000>; + ranges; + + ecspi1: ecspi@30820000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; + reg = <0x30820000 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>, + <&clks IMX7D_ECSPI1_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: ecspi@30830000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; + reg = <0x30830000 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>, + <&clks IMX7D_ECSPI2_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: ecspi@30840000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; + reg = <0x30840000 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>, + <&clks IMX7D_ECSPI3_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial@30860000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART1_ROOT_CLK>, + <&clks IMX7D_UART1_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial@30890000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30890000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART2_ROOT_CLK>, + <&clks IMX7D_UART2_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart3: serial@30880000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART3_ROOT_CLK>, + <&clks IMX7D_UART3_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + flexcan1: can@30a00000 { + compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan"; + reg = <0x30a00000 0x10000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CAN1_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + flexcan2: can@30a10000 { + compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan"; + reg = <0x30a10000 0x10000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CAN2_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c1: i2c@30a20000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a20000 0x10000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_I2C1_ROOT_CLK>; + status = "disabled"; + }; + + i2c2: i2c@30a30000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a30000 0x10000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_I2C2_ROOT_CLK>; + status = "disabled"; + }; + + i2c3: i2c@30a40000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a40000 0x10000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_I2C3_ROOT_CLK>; + status = "disabled"; + }; + + i2c4: i2c@30a50000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a50000 0x10000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_I2C4_ROOT_CLK>; + status = "disabled"; + }; + + uart4: serial@30a60000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30a60000 0x10000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART4_ROOT_CLK>, + <&clks IMX7D_UART4_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart5: serial@30a70000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30a70000 0x10000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART5_ROOT_CLK>, + <&clks IMX7D_UART5_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart6: serial@30a80000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30a80000 0x10000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART6_ROOT_CLK>, + <&clks IMX7D_UART6_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart7: serial@30a90000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30a90000 0x10000>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART7_ROOT_CLK>, + <&clks IMX7D_UART7_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + usbotg1: usb@30b10000 { + compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; + reg = <0x30b10000 0x200>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_USB_CTRL_CLK>; + fsl,usbphy = <&usbphynop1>; + fsl,usbmisc = <&usbmisc1 0>; + phy-clkgate-delay-us = <400>; + status = "disabled"; + }; + + usbh: usb@30b30000 { + compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; + reg = <0x30b30000 0x200>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_USB_CTRL_CLK>; + fsl,usbphy = <&usbphynop3>; + fsl,usbmisc = <&usbmisc3 0>; + phy_type = "hsic"; + dr_mode = "host"; + phy-clkgate-delay-us = <400>; + status = "disabled"; + }; + + usbmisc1: usbmisc@30b10200 { + #index-cells = <1>; + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x30b10200 0x200>; + }; + + usbmisc3: usbmisc@30b30200 { + #index-cells = <1>; + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x30b30200 0x200>; + }; + + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_PHY1_CLK>; + clock-names = "main_clk"; + }; + + usbphynop3: usbphynop3 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>; + clock-names = "main_clk"; + }; + + usdhc1: usdhc@30b40000 { + compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x30b40000 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_USDHC1_ROOT_CLK>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: usdhc@30b50000 { + compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x30b50000 0x10000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_USDHC2_ROOT_CLK>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: usdhc@30b60000 { + compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x30b60000 0x10000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_USDHC3_ROOT_CLK>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + fec1: ethernet@30be0000 { + compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; + reg = <0x30be0000 0x10000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, + <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi index 96b349fb0430..9a51b8c88581 100644 --- a/arch/arm/boot/dts/keystone-k2e.dtsi +++ b/arch/arm/boot/dts/keystone-k2e.dtsi @@ -96,13 +96,16 @@ #address-cells = <3>; #size-cells = <2>; reg = <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>; - ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000 - 0x82000000 0 0x60000000 0x60000000 0 0x10000000>; + ranges = <0x82000000 0 0x60000000 0x60000000 + 0 0x10000000>; status = "disabled"; device_type = "pci"; num-lanes = <2>; + bus-range = <0x00 0xff>; + /* error interrupt */ + interrupts = <GIC_SPI 385 IRQ_TYPE_EDGE_RISING>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_intc1 0>, /* INT A */ diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index 5bfd9e7845f2..692fcbb1434a 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -27,6 +27,17 @@ }; +&k2g_pinctrl { + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x11cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; +}; + &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi index 7ff2796ae925..3372615b885c 100644 --- a/arch/arm/boot/dts/keystone-k2g.dtsi +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -14,6 +14,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/keystone.h> #include "skeleton.dtsi" / { @@ -75,6 +76,13 @@ ranges = <0x0 0x0 0x0 0xc0000000>; dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>; + k2g_pinctrl: pinmux@02621000 { + compatible = "pinctrl-single"; + reg = <0x02621000 0x410>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x001b0007>; + }; + uart0: serial@02530c00 { compatible = "ns16550a"; current-speed = <115200>; diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi index ff22ffc3dee7..2ee3d0ac2816 100644 --- a/arch/arm/boot/dts/keystone-k2l.dtsi +++ b/arch/arm/boot/dts/keystone-k2l.dtsi @@ -54,6 +54,155 @@ interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>; }; + k2l_pmx: pinmux@02620690 { + compatible = "pinctrl-single"; + reg = <0x02620690 0xc>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x1>; + status = "disabled"; + + uart3_emifa_pins: pinmux_uart3_emifa_pins { + pinctrl-single,bits = < + /* UART3_EMIFA_SEL */ + 0x0 0x0 0xc0 + >; + }; + + uart2_emifa_pins: pinmux_uart2_emifa_pins { + pinctrl-single,bits = < + /* UART2_EMIFA_SEL */ + 0x0 0x0 0x30 + >; + }; + + uart01_spi2_pins: pinmux_uart01_spi2_pins { + pinctrl-single,bits = < + /* UART01_SPI2_SEL */ + 0x0 0x0 0x4 + >; + }; + + dfesync_rp1_pins: pinmux_dfesync_rp1_pins{ + pinctrl-single,bits = < + /* DFESYNC_RP1_SEL */ + 0x0 0x0 0x2 + >; + }; + + avsif_pins: pinmux_avsif_pins { + pinctrl-single,bits = < + /* AVSIF_SEL */ + 0x0 0x0 0x1 + >; + }; + + gpio_emu_pins: pinmux_gpio_emu_pins { + pinctrl-single,bits = < + /* + * GPIO_EMU_SEL[31]: 0-GPIO31, 1-EMU33 + * GPIO_EMU_SEL[30]: 0-GPIO30, 1-EMU32 + * GPIO_EMU_SEL[29]: 0-GPIO29, 1-EMU31 + * GPIO_EMU_SEL[28]: 0-GPIO28, 1-EMU30 + * GPIO_EMU_SEL[27]: 0-GPIO27, 1-EMU29 + * GPIO_EMU_SEL[26]: 0-GPIO26, 1-EMU28 + * GPIO_EMU_SEL[25]: 0-GPIO25, 1-EMU27 + * GPIO_EMU_SEL[24]: 0-GPIO24, 1-EMU26 + * GPIO_EMU_SEL[23]: 0-GPIO23, 1-EMU25 + * GPIO_EMU_SEL[22]: 0-GPIO22, 1-EMU24 + * GPIO_EMU_SEL[21]: 0-GPIO21, 1-EMU23 + * GPIO_EMU_SEL[20]: 0-GPIO20, 1-EMU22 + * GPIO_EMU_SEL[19]: 0-GPIO19, 1-EMU21 + * GPIO_EMU_SEL[18]: 0-GPIO18, 1-EMU20 + * GPIO_EMU_SEL[17]: 0-GPIO17, 1-EMU19 + */ + 0x4 0x0000 0xFFFE0000 + >; + }; + + gpio_timio_pins: pinmux_gpio_timio_pins { + pinctrl-single,bits = < + /* + * GPIO_TIMIO_SEL[15]: 0-GPIO15, 1-TIMO7 + * GPIO_TIMIO_SEL[14]: 0-GPIO14, 1-TIMO6 + * GPIO_TIMIO_SEL[13]: 0-GPIO13, 1-TIMO5 + * GPIO_TIMIO_SEL[12]: 0-GPIO12, 1-TIMO4 + * GPIO_TIMIO_SEL[11]: 0-GPIO11, 1-TIMO3 + * GPIO_TIMIO_SEL[10]: 0-GPIO10, 1-TIMO2 + * GPIO_TIMIO_SEL[9]: 0-GPIO9, 1-TIMI7 + * GPIO_TIMIO_SEL[8]: 0-GPIO8, 1-TIMI6 + * GPIO_TIMIO_SEL[7]: 0-GPIO7, 1-TIMI5 + * GPIO_TIMIO_SEL[6]: 0-GPIO6, 1-TIMI4 + * GPIO_TIMIO_SEL[5]: 0-GPIO5, 1-TIMI3 + * GPIO_TIMIO_SEL[4]: 0-GPIO4, 1-TIMI2 + */ + 0x4 0x0 0xFFF0 + >; + }; + + gpio_spi2cs_pins: pinmux_gpio_spi2cs_pins { + pinctrl-single,bits = < + /* + * GPIO_SPI2CS_SEL[3]: 0-GPIO3, 1-SPI2CS4 + * GPIO_SPI2CS_SEL[2]: 0-GPIO2, 1-SPI2CS3 + * GPIO_SPI2CS_SEL[1]: 0-GPIO1, 1-SPI2CS2 + * GPIO_SPI2CS_SEL[0]: 0-GPIO0, 1-SPI2CS1 + */ + 0x4 0x0 0xF + >; + }; + + gpio_dfeio_pins: pinmux_gpio_dfeio_pins { + pinctrl-single,bits = < + /* + * GPIO_DFEIO_SEL[31]: 0-DFEIO17, 1-GPIO63 + * GPIO_DFEIO_SEL[30]: 0-DFEIO16, 1-GPIO62 + * GPIO_DFEIO_SEL[29]: 0-DFEIO15, 1-GPIO61 + * GPIO_DFEIO_SEL[28]: 0-DFEIO14, 1-GPIO60 + * GPIO_DFEIO_SEL[27]: 0-DFEIO13, 1-GPIO59 + * GPIO_DFEIO_SEL[26]: 0-DFEIO12, 1-GPIO58 + * GPIO_DFEIO_SEL[25]: 0-DFEIO11, 1-GPIO57 + * GPIO_DFEIO_SEL[24]: 0-DFEIO10, 1-GPIO56 + * GPIO_DFEIO_SEL[23]: 0-DFEIO9, 1-GPIO55 + * GPIO_DFEIO_SEL[22]: 0-DFEIO8, 1-GPIO54 + * GPIO_DFEIO_SEL[21]: 0-DFEIO7, 1-GPIO53 + * GPIO_DFEIO_SEL[20]: 0-DFEIO6, 1-GPIO52 + * GPIO_DFEIO_SEL[19]: 0-DFEIO5, 1-GPIO51 + * GPIO_DFEIO_SEL[18]: 0-DFEIO4, 1-GPIO50 + * GPIO_DFEIO_SEL[17]: 0-DFEIO3, 1-GPIO49 + * GPIO_DFEIO_SEL[16]: 0-DFEIO2, 1-GPIO48 + */ + 0x8 0x0 0xFFFF0000 + >; + }; + + gpio_emifa_pins: pinmux_gpio_emifa_pins { + pinctrl-single,bits = < + /* + * GPIO_EMIFA_SEL[15]: 0-EMIFA17, 1-GPIO47 + * GPIO_EMIFA_SEL[14]: 0-EMIFA16, 1-GPIO46 + * GPIO_EMIFA_SEL[13]: 0-EMIFA15, 1-GPIO45 + * GPIO_EMIFA_SEL[12]: 0-EMIFA14, 1-GPIO44 + * GPIO_EMIFA_SEL[11]: 0-EMIFA13, 1-GPIO43 + * GPIO_EMIFA_SEL[10]: 0-EMIFA10, 1-GPIO42 + * GPIO_EMIFA_SEL[9]: 0-EMIFA9, 1-GPIO41 + * GPIO_EMIFA_SEL[8]: 0-EMIFA8, 1-GPIO40 + * GPIO_EMIFA_SEL[7]: 0-EMIFA7, 1-GPIO39 + * GPIO_EMIFA_SEL[6]: 0-EMIFA6, 1-GPIO38 + * GPIO_EMIFA_SEL[5]: 0-EMIFA5, 1-GPIO37 + * GPIO_EMIFA_SEL[4]: 0-EMIFA4, 1-GPIO36 + * GPIO_EMIFA_SEL[3]: 0-EMIFA3, 1-GPIO35 + * GPIO_EMIFA_SEL[2]: 0-EMIFA2, 1-GPIO34 + * GPIO_EMIFA_SEL[1]: 0-EMIFA1, 1-GPIO33 + * GPIO_EMIFA_SEL[0]: 0-EMIFA0, 1-GPIO32 + */ + 0x8 0x0 0xFFFF + >; + }; + }; + dspgpio0: keystone_dsp_gpio@02620240 { compatible = "ti,keystone-dsp-gpio"; gpio-controller; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index e34b2265458a..e23f46d15c80 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -294,13 +294,16 @@ #address-cells = <3>; #size-cells = <2>; reg = <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>; - ranges = <0x81000000 0 0 0x23250000 0 0x4000 - 0x82000000 0 0x50000000 0x50000000 0 0x10000000>; + ranges = <0x82000000 0 0x50000000 0x50000000 + 0 0x10000000>; status = "disabled"; device_type = "pci"; num-lanes = <2>; + bus-range = <0x00 0xff>; + /* error interrupt */ + interrupts = <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_intc0 0>, /* INT A */ diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts index 015f795a8d19..08cce17a25a0 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -72,7 +72,7 @@ }; }; - pwm10: dmtimer-pwm@10 { + pwm10: dmtimer-pwm { compatible = "ti,omap-dmtimer-pwm"; pinctrl-names = "default"; pinctrl-0 = <&pwm_pins>; @@ -147,7 +147,7 @@ gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */ }; - lcd0: display@0 { + lcd0: display { compatible = "panel-dpi"; label = "15"; status = "okay"; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 5ae8e9297e9a..368e21934285 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -626,6 +626,7 @@ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; }; pcie@3400000 { diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 2bfe401a4da9..fc4080de4b7b 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -46,6 +46,7 @@ #include <dt-bindings/clock/meson8b-clkc.h> #include <dt-bindings/gpio/meson8b-gpio.h> +#include <dt-bindings/reset/amlogic,meson8b-reset.h> #include "skeleton.dtsi" / { @@ -105,6 +106,12 @@ #interrupt-cells = <3>; }; + reset: reset-controller@c1104404 { + compatible = "amlogic,meson8b-reset"; + reg = <0xc1104404 0x20>; + #reset-cells = <1>; + }; + wdt: watchdog@c1109900 { compatible = "amlogic,meson8b-wdt"; reg = <0xc1109900 0x8>; diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts index f0f5e1098928..116ce78bea4f 100644 --- a/arch/arm/boot/dts/mpa1600.dts +++ b/arch/arm/boot/dts/mpa1600.dts @@ -17,15 +17,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <18432000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -61,7 +52,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/omap24xx-clocks.dtsi b/arch/arm/boot/dts/omap24xx-clocks.dtsi index ca73722b5ea4..769a346de613 100644 --- a/arch/arm/boot/dts/omap24xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap24xx-clocks.dtsi @@ -164,7 +164,7 @@ clock-div = <1>; }; - func_96m_ck: func_96m_ck { + func_96m_ck: func_96m_ck@540 { #clock-cells = <0>; }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 01e1e2d5c735..8ffde06281ad 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -91,7 +91,7 @@ vcc-supply = <&hsusb2_power>; }; - tfp410: encoder@0 { + tfp410: encoder0 { compatible = "ti,tfp410"; powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>; @@ -104,7 +104,7 @@ port@0 { reg = <0>; - tfp410_in: endpoint@0 { + tfp410_in: endpoint { remote-endpoint = <&dpi_out>; }; }; @@ -112,14 +112,14 @@ port@1 { reg = <1>; - tfp410_out: endpoint@0 { + tfp410_out: endpoint { remote-endpoint = <&dvi_connector_in>; }; }; }; }; - dvi0: connector@0 { + dvi0: connector0 { compatible = "dvi-connector"; label = "dvi"; @@ -134,7 +134,7 @@ }; }; - tv0: connector@1 { + tv0: connector1 { compatible = "svideo-connector"; label = "tv"; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index a4deff0e2d52..a19d907d4850 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -85,7 +85,7 @@ }; - tfp410: encoder@0 { + tfp410: encoder0 { compatible = "ti,tfp410"; powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */ @@ -99,7 +99,7 @@ port@0 { reg = <0>; - tfp410_in: endpoint@0 { + tfp410_in: endpoint { remote-endpoint = <&dpi_out>; }; }; @@ -107,14 +107,14 @@ port@1 { reg = <1>; - tfp410_out: endpoint@0 { + tfp410_out: endpoint { remote-endpoint = <&dvi_connector_in>; }; }; }; }; - dvi0: connector@0 { + dvi0: connector0 { compatible = "dvi-connector"; label = "dvi"; @@ -129,7 +129,7 @@ }; }; - tv0: connector@1 { + tv0: connector1 { compatible = "svideo-connector"; label = "tv"; diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index a8127bc31fd9..6a0df13fa0f3 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -57,7 +57,7 @@ regulator-max-microvolt = <3300000>; }; - tv0: connector@1 { + tv0: connector { compatible = "svideo-connector"; label = "tv"; diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi index b1b8ebf90c1c..586010179752 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi @@ -68,7 +68,7 @@ }; }; - tfp410: encoder@0 { + tfp410: encoder0 { compatible = "ti,tfp410"; powerdown-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>; @@ -79,7 +79,7 @@ port@0 { reg = <0>; - tfp410_in: endpoint@0 { + tfp410_in: endpoint { remote-endpoint = <&dpi_dvi_out>; }; }; @@ -87,14 +87,14 @@ port@1 { reg = <1>; - tfp410_out: endpoint@0 { + tfp410_out: endpoint { remote-endpoint = <&dvi_connector_in>; }; }; }; }; - dvi0: connector@0 { + dvi0: connector0 { compatible = "dvi-connector"; label = "dvi"; @@ -109,7 +109,7 @@ }; }; - tv0: connector@1 { + tv0: connector1 { compatible = "svideo-connector"; label = "tv"; @@ -352,7 +352,7 @@ vdda_dac-supply = <&vdac>; port { - dpi_dvi_out: endpoint@0 { + dpi_dvi_out: endpoint { remote-endpoint = <&tfp410_in>; data-lines = <24>; }; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi index 738910db5c0c..2d64bcffaaa8 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi @@ -14,7 +14,7 @@ display2 = &tv0; }; - lcd0: display@0 { + lcd0: display { compatible = "panel-dpi"; label = "lcd"; @@ -30,7 +30,7 @@ &dss { port { - dpi_lcd_out: endpoint@1 { + dpi_lcd_out: endpoint { remote-endpoint = <&lcd_in>; data-lines = <24>; }; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts index d5705356d52c..d8b16398bfb3 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts @@ -16,7 +16,7 @@ model = "TimLL OMAP3 Devkit8000 with 4.3'' LCD panel"; compatible = "timll,omap3-devkit8000", "ti,omap3"; - lcd0: display@0 { + lcd0: display { panel-timing { clock-frequency = <10164705>; hactive = <480>; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts index 4afad4b233ec..edb37ba80498 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts @@ -16,7 +16,7 @@ model = "TimLL OMAP3 Devkit8000 with 7.0'' LCD panel"; compatible = "timll,omap3-devkit8000", "ti,omap3"; - lcd0: display@0 { + lcd0: display { panel-timing { clock-frequency = <40000000>; hactive = <800>; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index ab9fb8f49ff3..c09a0574af90 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -100,12 +100,28 @@ }; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm11 0 2000000 0>; + pwm-names = "backlight"; + brightness-levels = <0 11 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <9>; /* => 90 */ + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + }; + + pwm11: dmtimer-pwm { + compatible = "ti,omap-dmtimer-pwm"; + ti,timers = <&timer11>; + #pwm-cells = <3>; + }; + hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; }; - tv0: connector@1 { + tv0: connector { compatible = "svideo-connector"; label = "tv"; @@ -126,19 +142,24 @@ port@0 { reg = <0>; - opa_in: endpoint@0 { + opa_in: endpoint { remote-endpoint = <&venc_out>; }; }; port@1 { reg = <1>; - opa_out: endpoint@0 { + opa_out: endpoint { remote-endpoint = <&tv_connector_in>; }; }; }; }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>; /* W2CBW003 reset through tca6507 */ + }; }; &omap3_pmx_core { @@ -190,6 +211,12 @@ >; }; + backlight_pins: backlight_pins_pimnux { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3) /* gpt11/gpio57 */ + >; + }; + dss_dpi_pins: pinmux_dss_dpi_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ @@ -228,6 +255,24 @@ OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */ >; }; + + bma180_pins: pinmux_bma180_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */ + >; + }; + + itg3200_pins: pinmux_itg3200_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio56 */ + >; + }; + + hmc5843_pins: pinmux_hmc5843_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */ + >; + }; }; &omap3_pmx_core2 { @@ -298,6 +343,8 @@ bma180@41 { compatible = "bosch,bma180"; reg = <0x41>; + pinctrl-names = "default"; + pintcrl-0 = <&bma180_pins>; interrupt-parent = <&gpio4>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */ }; @@ -306,12 +353,14 @@ itg3200@68 { compatible = "invensense,itg3200"; reg = <0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&itg3200_pins>; interrupt-parent = <&gpio2>; - interrupts = <24 0>; /* GPIO_56 */ + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; /* GPIO_56 */ }; - /* leds */ - tca6507@45 { + /* leds + gpios */ + tca6507: tca6507@45 { compatible = "ti,tca6507"; #address-cells = <1>; #size-cells = <0>; @@ -351,6 +400,10 @@ hmc5843@1e { compatible = "honeywell,hmc5883l"; reg = <0x1e>; + pinctrl-names = "default"; + pinctrl-0 = <&hmc5843_pins>; + interrupt-parent = <&gpio4>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; /* gpio112 */ }; /* touchscreen */ @@ -362,6 +415,12 @@ gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; ti,x-plate-ohms = <600>; }; + + /* RFID EEPROM */ + m24lr64@50 { + compatible = "at,24c64"; + reg = <0x50>; + }; }; &i2c3 { @@ -398,6 +457,7 @@ bus-width = <4>; ti,non-removable; cap-power-off-card; + mmc-pwrseq = <&wifi_pwrseq>; }; &mmc3 { diff --git a/arch/arm/boot/dts/omap3-ha-lcd.dts b/arch/arm/boot/dts/omap3-ha-lcd.dts index 11aa28d73f3a..60af7c2358a3 100644 --- a/arch/arm/boot/dts/omap3-ha-lcd.dts +++ b/arch/arm/boot/dts/omap3-ha-lcd.dts @@ -121,7 +121,7 @@ display0 = &lcd0; }; - lcd0: display@0 { + lcd0: display { compatible = "panel-dpi"; label = "lcd"; diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index b6971060648a..667f96245729 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -60,7 +60,7 @@ vcc-supply = <&hsusb1_power>; }; - tfp410: encoder@0 { + tfp410: encoder { compatible = "ti,tfp410"; powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */ @@ -71,7 +71,7 @@ port@0 { reg = <0>; - tfp410_in: endpoint@0 { + tfp410_in: endpoint { remote-endpoint = <&dpi_out>; }; }; @@ -79,14 +79,14 @@ port@1 { reg = <1>; - tfp410_out: endpoint@0 { + tfp410_out: endpoint { remote-endpoint = <&dvi_connector_in>; }; }; }; }; - dvi0: connector@0 { + dvi0: connector { compatible = "dvi-connector"; label = "dvi"; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 2b74a81d1de2..2a6078a8422c 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -143,6 +143,18 @@ io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>; io-channel-names = "temp", "bsi", "vbat"; }; + + pwm9: dmtimer-pwm { + compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; + ti,timers = <&timer9>; + ti,clock-source = <0x00>; /* timer_sys_ck */ + }; + + ir: n900-ir { + compatible = "nokia,n900-ir"; + pwms = <&pwm9 0 26316 0>; /* 38000 Hz */ + }; }; &omap3_pmx_core { diff --git a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi index 802f704f67e5..ae5564abbe2f 100644 --- a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi @@ -69,7 +69,7 @@ display0 = &dvi0; }; - tfp410: encoder@0 { + tfp410: encoder { compatible = "ti,tfp410"; ports { @@ -79,7 +79,7 @@ port@0 { reg = <0>; - tfp410_in: endpoint@0 { + tfp410_in: endpoint { remote-endpoint = <&dpi_out>; }; }; @@ -87,14 +87,14 @@ port@1 { reg = <1>; - tfp410_out: endpoint@0 { + tfp410_out: endpoint { remote-endpoint = <&dvi_connector_in>; }; }; }; }; - dvi0: connector@0 { + dvi0: connector { compatible = "dvi-connector"; label = "dvi"; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi index 6314da2580f5..ca86da68220c 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -119,7 +119,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mcspi1_pins>; - lcd0: display@0 { + lcd0: display { compatible = "lgphilips,lb035q02"; label = "lcd35"; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi index 7e3fe85a8ad9..b0753ef8abd4 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi @@ -96,7 +96,7 @@ display0 = &lcd0; }; - lcd0: display@0 { + lcd0: display { compatible = "samsung,lte430wq-f0c", "panel-dpi"; label = "lcd43"; diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index bcf39d606b65..dbc4dc721cc2 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -27,7 +27,7 @@ display0 = &lcd; }; - tv: connector@1 { + tv: connector { compatible = "connector-analog-tv"; label = "tv"; diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi index 827f614261f6..73643fabde5d 100644 --- a/arch/arm/boot/dts/omap3-sb-t35.dtsi +++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi @@ -3,7 +3,7 @@ */ / { - tfp410: encoder@0 { + tfp410: encoder { compatible = "ti,tfp410"; powerdown-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */ @@ -18,7 +18,7 @@ port@0 { reg = <0>; - tfp410_in: endpoint@0 { + tfp410_in: endpoint { remote-endpoint = <&dpi_out>; }; }; @@ -26,14 +26,14 @@ port@1 { reg = <1>; - tfp410_out: endpoint@0 { + tfp410_out: endpoint { remote-endpoint = <&dvi_connector_in>; }; }; }; }; - dvi0: connector@0 { + dvi0: connector { compatible = "dvi-connector"; label = "dvi"; diff --git a/arch/arm/boot/dts/omap3-thunder.dts b/arch/arm/boot/dts/omap3-thunder.dts index d659515ab9b8..9736ba79bb5b 100644 --- a/arch/arm/boot/dts/omap3-thunder.dts +++ b/arch/arm/boot/dts/omap3-thunder.dts @@ -85,7 +85,7 @@ display0 = &lcd0; }; - lcd0: display@0 { + lcd0: display { compatible = "samsung,lte430wq-f0c", "panel-dpi"; label = "lcd"; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 9fbda38528dc..4c3c471d2a83 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -493,6 +493,8 @@ dmas = <&sdma 31>, <&sdma 32>; dma-names = "tx", "rx"; + clocks = <&mcbsp1_fck>; + clock-names = "fck"; status = "disabled"; }; @@ -511,6 +513,8 @@ dmas = <&sdma 33>, <&sdma 34>; dma-names = "tx", "rx"; + clocks = <&mcbsp2_fck>, <&mcbsp2_ick>; + clock-names = "fck", "ick"; status = "disabled"; }; @@ -529,6 +533,8 @@ dmas = <&sdma 17>, <&sdma 18>; dma-names = "tx", "rx"; + clocks = <&mcbsp3_fck>, <&mcbsp3_ick>; + clock-names = "fck", "ick"; status = "disabled"; }; @@ -545,6 +551,8 @@ dmas = <&sdma 19>, <&sdma 20>; dma-names = "tx", "rx"; + clocks = <&mcbsp4_fck>; + clock-names = "fck"; status = "disabled"; }; @@ -561,6 +569,8 @@ dmas = <&sdma 21>, <&sdma 22>; dma-names = "tx", "rx"; + clocks = <&mcbsp5_fck>; + clock-names = "fck"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index 06c54822ddc2..6b39808b8313 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -40,7 +40,7 @@ }; }; - hdmi0: connector@0 { + hdmi0: connector { compatible = "hdmi-connector"; label = "hdmi"; diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi index f2a94fa62552..a90b582e4c3f 100644 --- a/arch/arm/boot/dts/omap4-duovero.dtsi +++ b/arch/arm/boot/dts/omap4-duovero.dtsi @@ -177,6 +177,7 @@ twl6040: twl@4b { compatible = "ti,twl6040"; + #clock-cells = <0>; reg = <0x4b>; interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ ti,audpwron-gpio = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* gpio_160 */ @@ -207,6 +208,10 @@ &mcpdm { pinctrl-names = "default"; pinctrl-0 = <&mcpdm_pins>; + + clocks = <&twl6040>; + clock-names = "pdmclk"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index df2e356ec089..f8f13952cfeb 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -103,7 +103,7 @@ enable-active-high; }; - tfp410: encoder@0 { + tfp410: encoder0 { compatible = "ti,tfp410"; powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* gpio_0 */ @@ -114,7 +114,7 @@ port@0 { reg = <0>; - tfp410_in: endpoint@0 { + tfp410_in: endpoint { remote-endpoint = <&dpi_out>; }; }; @@ -122,14 +122,14 @@ port@1 { reg = <1>; - tfp410_out: endpoint@0 { + tfp410_out: endpoint { remote-endpoint = <&dvi_connector_in>; }; }; }; }; - dvi0: connector@0 { + dvi0: connector0 { compatible = "dvi-connector"; label = "dvi"; @@ -144,7 +144,7 @@ }; }; - tpd12s015: encoder@1 { + tpd12s015: encoder1 { compatible = "ti,tpd12s015"; gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */ @@ -158,7 +158,7 @@ port@0 { reg = <0>; - tpd12s015_in: endpoint@0 { + tpd12s015_in: endpoint { remote-endpoint = <&hdmi_out>; }; }; @@ -166,14 +166,14 @@ port@1 { reg = <1>; - tpd12s015_out: endpoint@0 { + tpd12s015_out: endpoint { remote-endpoint = <&hdmi_connector_in>; }; }; }; }; - hdmi0: connector@1 { + hdmi0: connector1 { compatible = "hdmi-connector"; label = "hdmi"; @@ -376,6 +376,7 @@ twl6040: twl@4b { compatible = "ti,twl6040"; + #clock-cells = <0>; reg = <0x4b>; pinctrl-names = "default"; @@ -479,6 +480,10 @@ &mcpdm { pinctrl-names = "default"; pinctrl-0 = <&mcpdm_pins>; + + clocks = <&twl6040>; + clock-names = "pdmclk"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index aae513265dc2..10d73a784050 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -160,7 +160,7 @@ enable-active-high; }; - tpd12s015: encoder@0 { + tpd12s015: encoder { compatible = "ti,tpd12s015"; gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */ @@ -174,7 +174,7 @@ port@0 { reg = <0>; - tpd12s015_in: endpoint@0 { + tpd12s015_in: endpoint { remote-endpoint = <&hdmi_out>; }; }; @@ -182,14 +182,14 @@ port@1 { reg = <1>; - tpd12s015_out: endpoint@0 { + tpd12s015_out: endpoint { remote-endpoint = <&hdmi_connector_in>; }; }; }; }; - hdmi0: connector@0 { + hdmi0: connector { compatible = "hdmi-connector"; label = "hdmi"; @@ -367,6 +367,7 @@ twl6040: twl@4b { compatible = "ti,twl6040"; + #clock-cells = <0>; reg = <0x4b>; pinctrl-names = "default"; @@ -620,6 +621,10 @@ &mcpdm { pinctrl-names = "default"; pinctrl-0 = <&mcpdm_pins>; + + clocks = <&twl6040>; + clock-names = "pdmclk"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi index 6e278d7716a5..74940b6d7719 100644 --- a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi +++ b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi @@ -45,7 +45,7 @@ }; }; - hdmi0: connector@0 { + hdmi0: connector { compatible = "hdmi-connector"; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_pins>; diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi index a17997f4e9aa..873cfc87260c 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi @@ -189,6 +189,7 @@ twl6040: twl@4b { compatible = "ti,twl6040"; + #clock-cells = <0>; reg = <0x4b>; pinctrl-names = "default"; @@ -252,6 +253,10 @@ &mcpdm { pinctrl-names = "default"; pinctrl-0 = <&mcpdm_pins>; + + clocks = <&twl6040>; + clock-names = "pdmclk"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 5d5b620b7d9b..5196113202a2 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -87,7 +87,7 @@ }; }; - tpd12s015: encoder@0 { + tpd12s015: encoder { compatible = "ti,tpd12s015"; pinctrl-names = "default"; @@ -102,7 +102,7 @@ port@0 { reg = <0>; - tpd12s015_in: endpoint@0 { + tpd12s015_in: endpoint { remote-endpoint = <&hdmi_out>; }; }; @@ -110,14 +110,14 @@ port@1 { reg = <1>; - tpd12s015_out: endpoint@0 { + tpd12s015_out: endpoint { remote-endpoint = <&hdmi_connector_in>; }; }; }; }; - hdmi0: connector@0 { + hdmi0: connector { compatible = "hdmi-connector"; label = "hdmi"; @@ -637,6 +637,7 @@ twl6040: twl@4b { compatible = "ti,twl6040"; + #clock-cells = <0>; reg = <0x4b>; pinctrl-names = "default"; @@ -658,6 +659,10 @@ &mcpdm { pinctrl-names = "default"; pinctrl-0 = <&mcpdm_pins>; + + clocks = <&twl6040>; + clock-names = "pdmclk"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index 93fdfa96776e..a9765605d53b 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -112,7 +112,7 @@ }; }; - hdmi0: connector@0 { + hdmi0: connector0 { compatible = "hdmi-connector"; label = "hdmi"; @@ -130,7 +130,7 @@ }; }; - tfp410: encoder@0 { + tfp410: encoder0 { compatible = "ti,tfp410"; ports { @@ -140,7 +140,7 @@ port@0 { reg = <0>; - tfp410_in: endpoint@0 { + tfp410_in: endpoint { remote-endpoint = <&dpi_dvi_out>; }; }; @@ -148,14 +148,14 @@ port@1 { reg = <1>; - tfp410_out: endpoint@0 { + tfp410_out: endpoint { remote-endpoint = <&dvi_connector_in>; }; }; }; }; - dvi0: connector@1 { + dvi0: connector1 { compatible = "dvi-connector"; label = "dvi"; @@ -646,12 +646,17 @@ pinctrl-0 = <&dss_dpi_pins>; port { + #address-cells = <1>; + #size-cells = <0>; + dpi_dvi_out: endpoint@0 { + reg = <0>; remote-endpoint = <&tfp410_in>; data-lines = <24>; }; dpi_lcd_out: endpoint@1 { + reg = <1>; remote-endpoint = <&lcd_in>; data-lines = <24>; }; diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts index 66afcff67fde..0abd7bf17568 100644 --- a/arch/arm/boot/dts/pm9g45.dts +++ b/arch/arm/boot/dts/pm9g45.dts @@ -21,15 +21,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi index 210192c38df3..9e73dc6b3ed3 100644 --- a/arch/arm/boot/dts/pxa27x.dtsi +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -22,8 +22,15 @@ marvell,intc-nr-irqs = <34>; }; + pinctrl: pinctrl@40e00000 { + reg = <0x40e00054 0x20 0x40e0000c 0xc 0x40e0010c 4 + 0x40f00020 0x10>; + compatible = "marvell,pxa27x-pinctrl"; + }; + gpio: gpio@40e00000 { compatible = "intel,pxa27x-gpio"; + gpio-ranges = <&pinctrl 0 0 128>; clocks = <&clks CLK_NONE>; }; diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi index 5e5af078b9b5..3ff077ca4400 100644 --- a/arch/arm/boot/dts/pxa2xx.dtsi +++ b/arch/arm/boot/dts/pxa2xx.dtsi @@ -140,5 +140,13 @@ reg = <0x40900000 0x3c>; interrupts = <30 31>; }; + + lcd-controller@40500000 { + compatible = "marvell,pxa2xx-lcdc"; + reg = <0x44000000 0x10000>; + interrupts = <17>; + clocks = <&clks CLK_LCD>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi index fec47bcd8292..9d6f3aacedb7 100644 --- a/arch/arm/boot/dts/pxa3xx.dtsi +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -1,6 +1,96 @@ /* The pxa3xx skeleton simply augments the 2xx version */ #include "pxa2xx.dtsi" +#define MFP_PIN_PXA300(gpio) \ + ((gpio <= 2) ? (0x00b4 + 4 * gpio) : \ + (gpio <= 26) ? (0x027c + 4 * (gpio - 3)) : \ + (gpio <= 98) ? (0x0400 + 4 * (gpio - 27)) : \ + (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) : \ + 0) + +#define MFP_PIN_PXA310(gpio) \ + ((gpio <= 2) ? (0x00b4 + 4 * gpio) : \ + (gpio <= 26) ? (0x027c + 4 * (gpio - 3)) : \ + (gpio <= 29) ? (0x0400 + 4 * (gpio - 27)) : \ + (gpio <= 98) ? (0x0418 + 4 * (gpio - 30)) : \ + (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) : \ + (gpio <= 262) ? 0 : \ + (gpio <= 268) ? (0x052c + 4 * (gpio - 263)) : \ + 0) + +#define MFP_PIN_PXA320(gpio) \ + ((gpio <= 4) ? (0x0124 + 4 * gpio) : \ + (gpio <= 9) ? (0x028c + 4 * (gpio - 5)) : \ + (gpio <= 10) ? (0x0458 + 4 * (gpio - 10)) : \ + (gpio <= 26) ? (0x02a0 + 4 * (gpio - 11)) : \ + (gpio <= 48) ? (0x0400 + 4 * (gpio - 27)) : \ + (gpio <= 62) ? (0x045c + 4 * (gpio - 49)) : \ + (gpio <= 73) ? (0x04b4 + 4 * (gpio - 63)) : \ + (gpio <= 98) ? (0x04f0 + 4 * (gpio - 74)) : \ + (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) : \ + 0) + +/* + * MFP Alternate functions for pins having a gpio. + * Example of use: pinctrl-single,pins = < MFP_PIN_PXA310(21) MFP_AF1 > + */ +#define MFP_AF0 (0 << 0) +#define MFP_AF1 (1 << 0) +#define MFP_AF2 (2 << 0) +#define MFP_AF3 (3 << 0) +#define MFP_AF4 (4 << 0) +#define MFP_AF5 (5 << 0) +#define MFP_AF6 (6 << 0) + +/* + * MFP drive strength functions for pins. + * Example of use: pinctrl-single,drive-strength = MFP_DS03X; + */ +#define MFP_DSMSK (0x7 << 10) +#define MFP_DS01X < (0x0 << 10) MFP_DSMSK > +#define MFP_DS02X < (0x1 << 10) MFP_DSMSK > +#define MFP_DS03X < (0x2 << 10) MFP_DSMSK > +#define MFP_DS04X < (0x3 << 10) MFP_DSMSK > +#define MFP_DS06X < (0x4 << 10) MFP_DSMSK > +#define MFP_DS08X < (0x5 << 10) MFP_DSMSK > +#define MFP_DS10X < (0x6 << 10) MFP_DSMSK > +#define MFP_DS13X < (0x7 << 10) MFP_DSMSK > + +/* + * MFP low power mode for pins. + * Example of use: + * pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW|MFP_LPM_EDGE_FALL); + * + * Table that determines the low power modes outputs, with actual settings + * used in parentheses for don't-care values. Except for the float output, + * the configured driven and pulled levels match, so if there is a need for + * non-LPM pulled output, the same configuration could probably be used. + * + * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel + * (bit 7) (bit 8) (bit 14) (bit 13) (bit 15) + * + * Input 0 X(0) X(0) X(0) 0 + * Drive 0 0 0 0 X(1) 0 + * Drive 1 0 1 X(1) 0 0 + * Pull hi (1) 1 X(1) 1 0 0 + * Pull lo (0) 1 X(0) 0 1 0 + * Z (float) 1 X(0) 0 0 0 + */ +#define MFP_LPM(x) < (x) MFP_LPM_MSK > + +#define MFP_LPM_MSK 0xe1f0 +#define MFP_LPM_INPUT 0x0000 +#define MFP_LPM_DRIVE_LOW 0x2000 +#define MFP_LPM_DRIVE_HIGH 0x4100 +#define MFP_LPM_PULL_LOW 0x2080 +#define MFP_LPM_PULL_HIGH 0x4180 +#define MFP_LPM_FLOAT 0x0080 + +#define MFP_LPM_EDGE_NONE 0x0000 +#define MFP_LPM_EDGE_RISE 0x0010 +#define MFP_LPM_EDGE_FALL 0x0020 +#define MFP_LPM_EDGE_BOTH 0x0030 + / { model = "Marvell PXA3xx familiy SoC"; compatible = "marvell,pxa3xx"; @@ -43,6 +133,15 @@ marvell,intc-nr-irqs = <56>; }; + pinctrl: pinctrl@40e10000 { + compatible = "pinconf-single"; + reg = <0x40e10000 0xffff>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x7>; + }; + gpio: gpio@40e00000 { compatible = "intel,pxa3xx-gpio"; reg = <0x40e00000 0x10000>; @@ -92,7 +191,39 @@ compatible = "marvell,pxa-ohci"; reg = <0x4c000000 0x10000>; interrupts = <3>; - clocks = <&clks CLK_USBHOST>; + clocks = <&clks CLK_USBH>; + status = "disabled"; + }; + + pwm0: pwm@40b00000 { + compatible = "marvell,pxa270-pwm"; + reg = <0x40b00000 0x10>; + #pwm-cells = <1>; + clocks = <&clks CLK_PWM0>; + status = "disabled"; + }; + + pwm1: pwm@40b00010 { + compatible = "marvell,pxa270-pwm"; + reg = <0x40b00010 0x10>; + #pwm-cells = <1>; + clocks = <&clks CLK_PWM1>; + status = "disabled"; + }; + + pwm2: pwm@40c00000 { + compatible = "marvell,pxa270-pwm"; + reg = <0x40c00000 0x10>; + #pwm-cells = <1>; + clocks = <&clks CLK_PWM0>; + status = "disabled"; + }; + + pwm3: pwm@40c00010 { + compatible = "marvell,pxa270-pwm"; + reg = <0x40c00010 0x10>; + #pwm-cells = <1>; + clocks = <&clks CLK_PWM1>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts new file mode 100644 index 000000000000..0abc93e5bb00 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -0,0 +1,626 @@ +/* + * Copyright 2016 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "qcom-msm8660.dtsi" + +/ { + model = "Qualcomm APQ8060 Dragonboard"; + compatible = "qcom,apq8060-dragonboard", "qcom,msm8660"; + + aliases { + serial0 = &gsbi12_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + regulators { + compatible = "simple-bus"; + + /* Main power of the board: 3.7V */ + vph: regulator-fixed { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-name = "VPH"; + regulator-type = "voltage"; + regulator-always-on; + regulator-boot-on; + }; + + /* This is a levelshifter for SDCC5 */ + dragon_vio_txb: txb0104rgyr { + compatible = "regulator-fixed"; + regulator-name = "Dragon SDCC levelshifter"; + vin-supply = <&pm8058_l14>; + regulator-always-on; + }; + }; + + soc { + pinctrl@800000 { + /* eMMMC pins, all 8 data lines connected */ + dragon_sdcc1_pins: sdcc1 { + mux { + pins = "gpio159", "gpio160", "gpio161", + "gpio162", "gpio163", "gpio164", + "gpio165", "gpio166", "gpio167", + "gpio168"; + function = "sdc1"; + }; + clk { + pins = "gpio167"; /* SDC5 CLK */ + drive-strength = <16>; + bias-disable; + }; + cmd { + pins = "gpio168"; /* SDC5 CMD */ + drive-strength = <10>; + bias-pull-up; + }; + data { + /* SDC5 D0 to D7 */ + pins = "gpio159", "gpio160", "gpio161", "gpio162", + "gpio163", "gpio164", "gpio165", "gpio166"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + /* + * The SDCC3 pins are hardcoded (non-muxable) but need some pin + * configuration. + */ + dragon_sdcc3_pins: sdcc3 { + clk { + pins = "sdc3_clk"; + drive-strength = <8>; + bias-disable; + }; + cmd { + pins = "sdc3_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + data { + pins = "sdc3_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + /* Second SD card slot pins */ + dragon_sdcc5_pins: sdcc5 { + mux { + pins = "gpio95", "gpio96", "gpio97", + "gpio98", "gpio99", "gpio100"; + function = "sdc5"; + }; + clk { + pins = "gpio97"; /* SDC5 CLK */ + drive-strength = <16>; + bias-disable; + }; + cmd { + pins = "gpio95"; /* SDC5 CMD */ + drive-strength = <10>; + bias-pull-up; + }; + data { + /* SDC5 D0 to D3 */ + pins = "gpio96", "gpio98", "gpio99", "gpio100"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + dragon_gsbi12_i2c_pins: gsbi12_i2c { + mux { + pins = "gpio115", "gpio116"; + function = "gsbi12"; + }; + pinconf { + pins = "gpio115", "gpio116"; + drive-strength = <16>; + /* These have external pull-up 4.7kOhm to 1.8V */ + bias-disable; + }; + }; + + /* Primary serial port uart 0 pins */ + dragon_gsbi12_serial_pins: gsbi12_serial { + mux { + pins = "gpio117", "gpio118"; + function = "gsbi12"; + }; + tx { + pins = "gpio117"; + drive-strength = <8>; + bias-disable; + }; + rx { + pins = "gpio118"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; + + qcom,ssbi@500000 { + pmic@0 { + keypad@148 { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_MENU) + MATRIX_KEY(0, 2, KEY_1) + MATRIX_KEY(0, 3, KEY_4) + MATRIX_KEY(0, 4, KEY_7) + MATRIX_KEY(1, 0, KEY_UP) + MATRIX_KEY(1, 1, KEY_LEFT) + MATRIX_KEY(1, 2, KEY_DOWN) + MATRIX_KEY(1, 3, KEY_5) + MATRIX_KEY(1, 3, KEY_8) + MATRIX_KEY(2, 0, KEY_HOME) + MATRIX_KEY(2, 1, KEY_REPLY) + MATRIX_KEY(2, 2, KEY_2) + MATRIX_KEY(2, 3, KEY_6) + MATRIX_KEY(3, 0, KEY_VOLUMEUP) + MATRIX_KEY(3, 1, KEY_RIGHT) + MATRIX_KEY(3, 2, KEY_3) + MATRIX_KEY(3, 3, KEY_9) + MATRIX_KEY(3, 4, KEY_SWITCHVIDEOMODE) + MATRIX_KEY(4, 0, KEY_VOLUMEDOWN) + MATRIX_KEY(4, 1, KEY_BACK) + MATRIX_KEY(4, 2, KEY_CAMERA) + MATRIX_KEY(4, 3, KEY_KBDILLUMTOGGLE) + >; + keypad,num-rows = <6>; + keypad,num-columns = <5>; + }; + + gpio@150 { + dragon_bmp085_gpios: bmp085-gpios { + pinconf { + pins = "gpio16"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + }; + dragon_sdcc3_gpios: sdcc3-gpios { + pinconf { + pins = "gpio22"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + }; + dragon_sdcc5_gpios: sdcc5-gpios { + pinconf { + pins = "gpio26"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>; + power-source = <PM8058_GPIO_S3>; + }; + }; + dragon_ak8975_gpios: ak8975-gpios { + pinconf { + pins = "gpio33"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + }; + }; + }; + }; + + gsbi@19c00000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + + serial@19c40000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_gsbi12_serial_pins>; + }; + + i2c@19c80000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_gsbi12_i2c_pins>; + + ak8975@0c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + /* GPIO33 has interrupt 224 on the PM8058 */ + interrupt-parent = <&pm8058_gpio>; + interrupts = <224 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_ak8975_gpios>; + vid-supply = <&pm8058_lvs0>; // 1.8V + vdd-supply = <&pm8058_l14>; // 2.85V + }; + bmp085@77 { + compatible = "bosch,bmp085"; + reg = <0x77>; + /* GPIO16 has interrupt 207 on the PM8058 */ + interrupt-parent = <&pm8058_gpio>; + interrupts = <207 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_bmp085_gpios>; + vddd-supply = <&pm8058_lvs0>; // 1.8V + vdda-supply = <&pm8058_l14>; // 2.85V + }; + }; + }; + + rpm@104000 { + /* + * Set up of the PMIC RPM regulators for this board + * PM8901 supplies "preliminary regulators" whatever + * that means + */ + pm8901-regulators { + vdd_l0-supply = <&pm8901_s4>; + vdd_l1-supply = <&vph>; + vdd_l2-supply = <&vph>; + vdd_l3-supply = <&vph>; + vdd_l4-supply = <&vph>; + vdd_l5-supply = <&vph>; + vdd_l6-supply = <&vph>; + /* vdd_s0-supply, vdd_s1-supply: SAW regulators */ + vdd_s2-supply = <&vph>; + vdd_s3-supply = <&vph>; + vdd_s4-supply = <&vph>; + lvs0_in-supply = <&pm8058_s3>; + lvs1_in-supply = <&pm8901_s4>; + lvs2_in-supply = <&pm8058_l0>; + lvs3_in-supply = <&pm8058_s2>; + mvs_in-supply = <&pm8058_s3>; + + l0 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + l1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + l2 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + l3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + l4 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; + bias-pull-down; + }; + l5 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + l6 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + bias-pull-down; + }; + + /* s0 and s1 are SAW regulators controlled over SPM */ + s2 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + s3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + s4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + /* LVS0 thru 3 and mvs0 are just switches */ + lvs0 { + regulator-always-on; + }; + lvs1 { }; + lvs2 { }; + lvs3 { }; + mvs0 {}; + + }; + + pm8058-regulators { + vdd_l0_l1_lvs-supply = <&pm8058_s3>; + vdd_l2_l11_l12-supply = <&vph>; + vdd_l3_l4_l5-supply = <&vph>; + vdd_l6_l7-supply = <&vph>; + vdd_l8-supply = <&vph>; + vdd_l9-supply = <&vph>; + vdd_l10-supply = <&vph>; + vdd_l13_l16-supply = <&pm8058_s4>; + vdd_l14_l15-supply = <&vph>; + vdd_l17_l18-supply = <&vph>; + vdd_l19_l20-supply = <&vph>; + vdd_l21-supply = <&pm8058_s3>; + vdd_l22-supply = <&pm8058_s3>; + vdd_l23_l24_l25-supply = <&pm8058_s3>; + vdd_s0-supply = <&vph>; + vdd_s1-supply = <&vph>; + vdd_s2-supply = <&vph>; + vdd_s3-supply = <&vph>; + vdd_s4-supply = <&vph>; + vdd_ncp-supply = <&vph>; + + l0 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + l1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + l2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2600000>; + bias-pull-down; + }; + l3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + l4 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + l5 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + l6 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3600000>; + bias-pull-down; + }; + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3050000>; + bias-pull-down; + }; + l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + l10 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; + bias-pull-down; + }; + l11 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + bias-pull-down; + }; + l12 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + bias-pull-down; + }; + l13 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + bias-pull-down; + }; + l14 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + l15 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + regulator-always-on; + }; + l17 { + // 1.5V according to schematic + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; + bias-pull-down; + }; + l18 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + bias-pull-down; + }; + l19 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + bias-pull-down; + }; + l20 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + l21 { + // 1.1 V according to schematic + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + regulator-always-on; + }; + l22 { + // 1.2 V according to schematic + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + bias-pull-down; + }; + l23 { + // Unused + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + l24 { + // Unused + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + l25 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + s0 { + // regulator-min-microvolt = <500000>; + // regulator-max-microvolt = <1325000>; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + s1 { + // regulator-min-microvolt = <500000>; + // regulator-max-microvolt = <1250000>; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + s2 { + // 1.3 V according to schematic + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + regulator-always-on; + bias-pull-down; + }; + s4 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + qcom,switch-mode-frequency = <1600000>; + regulator-always-on; + bias-pull-down; + }; + + /* LVS0 and LVS1 are just switches */ + lvs0 { + bias-pull-down; + }; + lvs1 { + bias-pull-down; + }; + + ncp { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + }; + }; + }; + amba { + /* Internal 3.69 GiB eMMC */ + sdcc@12400000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_sdcc1_pins>; + vmmc-supply = <&pm8901_l5>; + vqmmc-supply = <&pm8901_lvs0>; + }; + + /* External micro SD card, directly connected, pulled up to 2.85 V */ + sdcc@12180000 { + status = "okay"; + /* Enable SSBI GPIO 22 as input, use for card detect */ + pinctrl-names = "default"; + pinctrl-0 = <&dragon_sdcc3_pins>, <&dragon_sdcc3_gpios>; + cd-gpios = <&pm8058_gpio 22 GPIO_ACTIVE_LOW>; + wp-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&pm8058_l14>; + }; + + /* + * Second external micro SD card, using two TXB104RGYR levelshifters + * to lift from 1.8 V to 2.85 V + */ + sdcc@12200000 { + status = "okay"; + /* Enable SSBI GPIO 26 as input, use for card detect */ + pinctrl-names = "default"; + pinctrl-0 = <&dragon_sdcc5_pins>, <&dragon_sdcc5_gpios>; + cd-gpios = <&pm8058_gpio 26 GPIO_ACTIVE_LOW>; + wp-gpios = <&tlmm 106 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&pm8058_l14>; + vqmmc-supply = <&dragon_vio_txb>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi index a3efb9704fcd..a3efb9704fcd 100644 --- a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts index e01b27ea7fba..39ae2bc8cb08 100644 --- a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts +++ b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts @@ -1,10 +1,11 @@ #include "qcom-apq8064-v2.0.dtsi" -#include "qcom-apq8064-arrow-db600c-pins.dtsi" +#include "qcom-apq8064-arrow-sd-600eval-pins.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/qcom-rpm.h> / { - model = "Arrow Electronics, APQ8064 DB600c"; - compatible = "arrow,db600c", "qcom,apq8064"; + model = "Arrow Electronics, APQ8064 SD_600eval"; + compatible = "arrow,sd_600eval", "qcom,apq8064"; aliases { serial0 = &gsbi7_serial; @@ -82,7 +83,8 @@ s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - qcom,switch-mode-frequency = <3200000>; + qcom,switch-mode-frequency = <1600000>; + qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; bias-pull-down; regulator-always-on; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts index 32fedfa149d0..7b05f072bfc2 100644 --- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts +++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts @@ -29,12 +29,6 @@ gpio-keys { compatible = "gpio-keys"; - power { - label = "Power"; - gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - gpio-key,wakeup; - }; volume_up { label = "Volume Up"; gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi index 4102a98f475b..6b801e7e57a2 100644 --- a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi @@ -7,6 +7,46 @@ }; }; + sdcc1_pins: sdcc1-pin-active { + clk { + pins = "sdc1_clk"; + drive-strengh = <16>; + bias-disable; + }; + + cmd { + pins = "sdc1_cmd"; + drive-strengh = <10>; + bias-pull-up; + }; + + data { + pins = "sdc1_data"; + drive-strengh = <10>; + bias-pull-up; + }; + }; + + sdcc3_pins: sdcc3-pin-active { + clk { + pins = "sdc3_clk"; + drive-strengh = <8>; + bias-disable; + }; + + cmd { + pins = "sdc3_cmd"; + drive-strengh = <8>; + bias-pull-up; + }; + + data { + pins = "sdc3_data"; + drive-strengh = <8>; + bias-pull-up; + }; + }; + ps_hold: ps_hold { mux { pins = "gpio78"; diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts index 06b3c76c3e41..ebd675ca94b4 100644 --- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts +++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts @@ -70,45 +70,6 @@ }; }; - sdcc1_pin_a: sdcc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strengh = <16>; - bias-disable; - }; - - cmd { - pins = "sdc1_cmd"; - drive-strengh = <10>; - bias-pull-up; - }; - - data { - pins = "sdc1_data"; - drive-strengh = <10>; - bias-pull-up; - }; - }; - - sdcc3_pin_a: sdcc3-pin-active { - clk { - pins = "sdc3_clk"; - drive-strengh = <8>; - bias-disable; - }; - - cmd { - pins = "sdc3_cmd"; - drive-strengh = <8>; - bias-pull-up; - }; - - data { - pins = "sdc3_data"; - drive-strengh = <8>; - bias-pull-up; - }; - }; sdcc3_cd_pin_a: sdcc3-cd-pin-active { pins = "gpio26"; @@ -417,9 +378,6 @@ vmmc-supply = <&pm8921_l5>; vqmmc-supply = <&pm8921_s4>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdcc1_pin_a>; }; sdcc3: sdcc@12180000 { @@ -429,7 +387,7 @@ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&sdcc3_pin_a>, <&sdcc3_cd_pin_a>; + pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>; }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index e318d04319a0..74a9b6c394f5 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -177,7 +177,7 @@ apps_smsm: apps@0 { reg = <0>; - #qcom,state-cells = <1>; + #qcom,smem-state-cells = <1>; }; modem_smsm: modem@1 { @@ -213,6 +213,12 @@ }; }; + firmware { + scm { + compatible = "qcom,scm-apq8064"; + }; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -854,6 +860,8 @@ sdcc1: sdcc@12400000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; + pinctrl-names = "default"; + pinctrl-0 = <&sdcc1_pins>; arm,primecell-periphid = <0x00051180>; reg = <0x12400000 0x2000>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index c0e205315042..ad51df27dfb7 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -25,11 +25,23 @@ bus-width = <8>; non-removable; status = "ok"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc1_pin_a>; }; sdhci@f98a4900 { cd-gpios = <&msmgpio 62 0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; bus-width = <4>; + status = "ok"; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; }; @@ -59,6 +71,42 @@ function = "blsp_spi8"; }; }; + + sdhc1_pin_a: sdhc1-pin-active { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdhc2_cd_pin_a: sdhc2-cd-pin-active { + pins = "gpio62"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdhc2_pin_a: sdhc2-pin-active { + clk { + pins = "sdc2_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; }; i2c@f9967000 { @@ -75,4 +123,203 @@ }; }; }; + + smd { + rpm { + rpm_requests { + pm8841-regulators { + s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + s4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + }; + + pm8941-regulators { + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vin_5vs-supply = <&pm8941_5v>; + + s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + + regulator-always-on; + regulator-boot-on; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l3 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + }; + + l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-allow-set-load; + regulator-boot-on; + regulator-system-load = <200000>; + }; + + l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + + regulator-boot-on; + }; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index a33a09f6821e..7c2df062a025 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -86,6 +86,14 @@ }; }; + firmware { + scm { + compatible = "qcom,scm"; + clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; + clock-names = "core", "bus", "iface"; + }; + }; + cpu-pmu { compatible = "qcom,krait-pmu"; interrupts = <1 7 0xf04>; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index e625656a608a..b7a24af8f47b 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -84,6 +84,12 @@ }; }; + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + clocks { sleep_clk: sleep_clk { compatible = "fixed-clock"; diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index b17f379e8c2a..23de764558ab 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -23,15 +23,26 @@ }; }; + /* Temporary fixed regulator */ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + amba { /* eMMC */ sdcc1: sdcc@12400000 { status = "okay"; + vmmc-supply = <&vsdcc_fixed>; }; /* External micro SD card */ sdcc3: sdcc@12180000 { status = "okay"; + vmmc-supply = <&vsdcc_fixed>; }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index cd214030b84a..acbe71febe13 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -122,11 +122,22 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x19c40000 0x1000>, <0x19c00000 0x1000>; - interrupts = <0 195 0x0>; + interrupts = <0 195 IRQ_TYPE_NONE>; clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>; clock-names = "core", "iface"; status = "disabled"; }; + + gsbi12_i2c: i2c@19c80000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x19c80000 0x1000>; + interrupts = <0 196 IRQ_TYPE_NONE>; + clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; qcom,ssbi@500000 { @@ -143,6 +154,44 @@ #address-cells = <1>; #size-cells = <0>; + pm8058_gpio: gpio@150 { + compatible = "qcom,pm8058-gpio", + "qcom,ssbi-gpio"; + reg = <0x150>; + interrupt-parent = <&pmicintc>; + interrupts = <192 1>, <193 1>, <194 1>, + <195 1>, <196 1>, <197 1>, + <198 1>, <199 1>, <200 1>, + <201 1>, <202 1>, <203 1>, + <204 1>, <205 1>, <206 1>, + <207 1>, <208 1>, <209 1>, + <210 1>, <211 1>, <212 1>, + <213 1>, <214 1>, <215 1>, + <216 1>, <217 1>, <218 1>, + <219 1>, <220 1>, <221 1>, + <222 1>, <223 1>, <224 1>, + <225 1>, <226 1>, <227 1>, + <228 1>, <229 1>, <230 1>, + <231 1>, <232 1>, <233 1>, + <234 1>, <235 1>; + gpio-controller; + #gpio-cells = <2>; + + }; + + pm8058_mpps: mpps@50 { + compatible = "qcom,pm8058-mpp", + "qcom,ssbi-mpp"; + reg = <0x50>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&pmicintc>; + interrupts = + <128 1>, <129 1>, <130 1>, <131 1>, + <132 1>, <133 1>, <134 1>, <135 1>, + <136 1>, <137 1>, <138 1>, <139 1>; + }; + pwrkey@1c { compatible = "qcom,pm8058-pwrkey"; reg = <0x1c>; @@ -162,11 +211,11 @@ row-hold = <91500>; }; - rtc@11d { + rtc@1e8 { compatible = "qcom,pm8058-rtc"; + reg = <0x1e8>; interrupt-parent = <&pmicintc>; interrupts = <39 1>; - reg = <0x11d>; allow-set-time; }; @@ -177,13 +226,93 @@ }; }; - /* Temporary fixed regulator */ - vsdcc_fixed: vsdcc-regulator { - compatible = "regulator-fixed"; - regulator-name = "SDCC Power"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - regulator-always-on; + l2cc: clock-controller@2082000 { + compatible = "syscon"; + reg = <0x02082000 0x1000>; + }; + + rpm: rpm@104000 { + compatible = "qcom,rpm-msm8660"; + reg = <0x00104000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; + + interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ack", "err", "wakeup"; + clocks = <&gcc RPM_MSG_RAM_H_CLK>; + clock-names = "ram"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-apq8660", "qcom,rpmcc"; + #clock-cells = <1>; + }; + + pm8901-regulators { + compatible = "qcom,rpm-pm8901-regulators"; + + pm8901_l0: l0 {}; + pm8901_l1: l1 {}; + pm8901_l2: l2 {}; + pm8901_l3: l3 {}; + pm8901_l4: l4 {}; + pm8901_l5: l5 {}; + pm8901_l6: l6 {}; + + /* S0 and S1 Handled as SAW regulators by SPM */ + pm8901_s2: s2 {}; + pm8901_s3: s3 {}; + pm8901_s4: s4 {}; + + pm8901_lvs0: lvs0 {}; + pm8901_lvs1: lvs1 {}; + pm8901_lvs2: lvs2 {}; + pm8901_lvs3: lvs3 {}; + + pm8901_mvs: mvs {}; + }; + + pm8058-regulators { + compatible = "qcom,rpm-pm8058-regulators"; + + pm8058_l0: l0 {}; + pm8058_l1: l1 {}; + pm8058_l2: l2 {}; + pm8058_l3: l3 {}; + pm8058_l4: l4 {}; + pm8058_l5: l5 {}; + pm8058_l6: l6 {}; + pm8058_l7: l7 {}; + pm8058_l8: l8 {}; + pm8058_l9: l9 {}; + pm8058_l10: l10 {}; + pm8058_l11: l11 {}; + pm8058_l12: l12 {}; + pm8058_l13: l13 {}; + pm8058_l14: l14 {}; + pm8058_l15: l15 {}; + pm8058_l16: l16 {}; + pm8058_l17: l17 {}; + pm8058_l18: l18 {}; + pm8058_l19: l19 {}; + pm8058_l20: l20 {}; + pm8058_l21: l21 {}; + pm8058_l22: l22 {}; + pm8058_l23: l23 {}; + pm8058_l24: l24 {}; + pm8058_l25: l25 {}; + + pm8058_s0: s0 {}; + pm8058_s1: s1 {}; + pm8058_s2: s2 {}; + pm8058_s3: s3 {}; + pm8058_s4: s4 {}; + + pm8058_lvs0: lvs0 {}; + pm8058_lvs1: lvs1 {}; + + pm8058_ncp: ncp {}; + }; }; amba { @@ -205,7 +334,6 @@ non-removable; cap-sd-highspeed; cap-mmc-highspeed; - vmmc-supply = <&vsdcc_fixed>; }; sdcc3: sdcc@12180000 { @@ -222,7 +350,21 @@ cap-mmc-highspeed; max-frequency = <48000000>; no-1-8-v; - vmmc-supply = <&vsdcc_fixed>; + }; + + sdcc5: sdcc@12200000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12200000 0x8000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <48000000>; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index a0398b69f4f2..3fb4dada6b0d 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -367,6 +367,10 @@ }; }; + + dma-controller@f9944000 { + qcom,controlled-remotely; + }; }; &spmi_bus { diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 6f164266a010..561d4d136762 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -1,6 +1,6 @@ /dts-v1/; -#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> #include "skeleton.dtsi" @@ -182,7 +182,7 @@ modem_smp2p_out: master-kernel { qcom,entry-name = "master-kernel"; - #qcom,state-cells = <1>; + #qcom,smem-state-cells = <1>; }; modem_smp2p_in: slave-kernel { @@ -208,7 +208,7 @@ wcnss_smp2p_out: master-kernel { qcom,entry-name = "master-kernel"; - #qcom,state-cells = <1>; + #qcom,smem-state-cells = <1>; }; wcnss_smp2p_in: slave-kernel { @@ -232,7 +232,7 @@ apps_smsm: apps@0 { reg = <0>; - #qcom,state-cells = <1>; + #qcom,smem-state-cells = <1>; }; modem_smsm: modem@1 { @@ -260,6 +260,14 @@ }; }; + firmware { + scm { + compatible = "qcom,scm"; + clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; + clock-names = "core", "bus", "iface"; + }; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -501,6 +509,8 @@ clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; + dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; + dma-names = "tx", "rx"; }; spmi_bus: spmi@fc4cf000 { @@ -518,6 +528,16 @@ interrupt-controller; #interrupt-cells = <4>; }; + + blsp2_dma: dma-controller@f9944000 { + compatible = "qcom,bam-v1.4.0"; + reg = <0xf9944000 0x19000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; }; smd { diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi index 4e9bd3f88473..82d258094156 100644 --- a/arch/arm/boot/dts/qcom-pma8084.dtsi +++ b/arch/arm/boot/dts/qcom-pma8084.dtsi @@ -12,15 +12,23 @@ rtc@6000 { compatible = "qcom,pm8941-rtc"; - reg = <0x6000 0x100>, - <0x6100 0x100>; + reg = <0x6000>, + <0x6100>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; + pwrkey@800 { + compatible = "qcom,pm8941-pwrkey"; + reg = <0x800>; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + }; + pma8084_gpios: gpios@c000 { compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio"; - reg = <0xc000 0x1600>; + reg = <0xc000>; gpio-controller; #gpio-cells = <2>; interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, @@ -49,7 +57,7 @@ pma8084_mpps: mpps@a000 { compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp"; - reg = <0xa000 0x800>; + reg = <0xa000>; gpio-controller; #gpio-cells = <2>; interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, @@ -64,7 +72,7 @@ pma8084_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; - reg = <0x2400 0x100>; + reg = <0x2400>; interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; #thermal-sensor-cells = <0>; io-channels = <&pma8084_vadc VADC_DIE_TEMP>; @@ -73,7 +81,7 @@ pma8084_vadc: vadc@3100 { compatible = "qcom,spmi-vadc"; - reg = <0x3100 0x100>; + reg = <0x3100>; interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts index a9da7a89fc4b..118a8e2b86bd 100644 --- a/arch/arm/boot/dts/r7s72100-genmai.dts +++ b/arch/arm/boot/dts/r7s72100-genmai.dts @@ -17,15 +17,15 @@ compatible = "renesas,genmai", "renesas,r7s72100"; aliases { - serial2 = &scif2; + serial0 = &scif2; }; chosen { bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; - stdout-path = &scif2; + stdout-path = "serial0:115200n8"; }; - memory { + memory@8000000 { device_type = "memory"; reg = <0x08000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index 93ace33e3e36..ec7c86e06538 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -36,7 +36,7 @@ reg = <2 0x00000000 0 0x40000000>; }; - vcc_mmc0: regulator@0 { + vcc_mmc0: regulator-mmc0 { compatible = "regulator-fixed"; regulator-name = "MMC0 Vcc"; regulator-min-microvolt = <2800000>; @@ -44,7 +44,7 @@ regulator-always-on; }; - vcc_sdhi0: regulator@1 { + vcc_sdhi0: regulator-sdhi0 { compatible = "regulator-fixed"; regulator-name = "SDHI0 Vcc"; @@ -56,7 +56,7 @@ }; /* Common 1.8V and 3.3V rails, used by several devices on APE6EVM */ - ape6evm_fixed_1v8: regulator@2 { + ape6evm_fixed_1v8: regulator-1v8 { compatible = "regulator-fixed"; regulator-name = "1V8"; regulator-min-microvolt = <1800000>; @@ -64,7 +64,7 @@ regulator-always-on; }; - ape6evm_fixed_3v3: regulator@3 { + ape6evm_fixed_3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "3V3"; regulator-min-microvolt = <3300000>; @@ -188,12 +188,12 @@ }; &pfc { - scifa0_pins: serial0 { + scifa0_pins: scifa0 { groups = "scifa0_data"; function = "scifa0"; }; - mmc0_pins: mmc { + mmc0_pins: mmc0 { groups = "mmc0_data8", "mmc0_ctrl"; function = "mmc0"; }; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 6954912a3753..ca8672778fe0 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -31,6 +31,24 @@ power-domains = <&pd_a2sl>; next-level-cache = <&L2_CA15>; }; + + L2_CA15: cache-controller@0 { + compatible = "cache"; + reg = <0>; + clocks = <&cpg_clocks R8A73A4_CLK_Z>; + power-domains = <&pd_a3sm>; + cache-unified; + cache-level = <2>; + }; + + L2_CA7: cache-controller@100 { + compatible = "cache"; + reg = <0x100>; + clocks = <&cpg_clocks R8A73A4_CLK_Z2>; + power-domains = <&pd_a3km>; + cache-unified; + cache-level = <2>; + }; }; ptm { @@ -46,22 +64,6 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; - L2_CA15: cache-controller@0 { - compatible = "cache"; - clocks = <&cpg_clocks R8A73A4_CLK_Z>; - power-domains = <&pd_a3sm>; - cache-unified; - cache-level = <2>; - }; - - L2_CA7: cache-controller@1 { - compatible = "cache"; - clocks = <&cpg_clocks R8A73A4_CLK_Z2>; - power-domains = <&pd_a3km>; - cache-unified; - cache-level = <2>; - }; - dbsc1: memory-controller@e6790000 { compatible = "renesas,dbsc-r8a73a4"; reg = <0 0xe6790000 0 0x10000>; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 2c82dab2b6f4..7885075428bb 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -20,20 +20,20 @@ compatible = "renesas,armadillo800eva", "renesas,r8a7740"; aliases { - serial1 = &scifa1; + serial0 = &scifa1; }; chosen { - bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw"; - stdout-path = &scifa1; + bootargs = "earlyprintk ignore_loglevel root=/dev/nfs ip=dhcp rw"; + stdout-path = "serial0:115200n8"; }; - memory { + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x20000000>; }; - reg_3p3v: regulator@0 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -42,7 +42,7 @@ regulator-boot-on; }; - vcc_sdhi0: regulator@1 { + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; regulator-name = "SDHI0 Vcc"; @@ -53,7 +53,7 @@ enable-active-high; }; - vccq_sdhi0: regulator@2 { + vccq_sdhi0: regulator-vccq-sdhi0 { compatible = "regulator-gpio"; regulator-name = "SDHI0 VccQ"; @@ -69,7 +69,7 @@ enable-active-high; }; - reg_5p0v: regulator@3 { + reg_5p0v: regulator-5p0v { compatible = "regulator-fixed"; regulator-name = "fixed-5.0V"; regulator-min-microvolt = <5000000>; @@ -127,7 +127,7 @@ }; }; - i2c2: i2c@2 { + i2c2: i2c-2 { #address-cells = <1>; #size-cells = <0>; compatible = "i2c-gpio"; @@ -232,7 +232,7 @@ function = "gether"; }; - scifa1_pins: serial1 { + scifa1_pins: scifa1 { groups = "scifa1_data"; function = "scifa1"; }; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 39b2f88ad151..159e04eb1b9e 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -39,7 +39,7 @@ <0xc2000000 0x1000>; }; - L2: cache-controller { + L2: cache-controller@f0100000 { compatible = "arm,pl310-cache"; reg = <0xf0100000 0x1000>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index e0dab1464648..211d239d9041 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -32,12 +32,12 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x10000000>; }; - fixedregulator3v3: fixedregulator@0 { + fixedregulator3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -129,7 +129,7 @@ pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; - scif0_pins: serial0 { + scif0_pins: scif0 { groups = "scif0_data_a", "scif0_ctrl"; function = "scif0"; }; @@ -223,6 +223,7 @@ pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index fe787b4751d2..e571d66ea0fe 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -276,23 +276,23 @@ status = "disabled"; rcar_sound,src { - src3: src@3 { }; - src4: src@4 { }; - src5: src@5 { }; - src6: src@6 { }; - src7: src@7 { }; - src8: src@8 { }; - src9: src@9 { }; + src3: src-3 { }; + src4: src-4 { }; + src5: src-5 { }; + src6: src-6 { }; + src7: src-7 { }; + src8: src-8 { }; + src9: src-9 { }; }; rcar_sound,ssi { - ssi3: ssi@3 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; }; - ssi4: ssi@4 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; }; - ssi5: ssi@5 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; - ssi6: ssi@6 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; - ssi7: ssi@7 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; - ssi8: ssi@8 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; - ssi9: ssi@9 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi3: ssi-3 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; }; + ssi4: ssi-4 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; }; + ssi5: ssi-5 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi6: ssi-6 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi7: ssi-7 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi8: ssi-8 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi9: ssi-9 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; }; }; diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index b795da6f5503..541678df90a9 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -25,15 +25,15 @@ chosen { bootargs = "ignore_loglevel root=/dev/nfs ip=on"; - stdout-path = &scif2; + stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x40000000>; }; - fixedregulator3v3: fixedregulator@0 { + fixedregulator3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -195,12 +195,12 @@ }; }; - scif2_pins: serial2 { + scif2_pins: scif2 { groups = "scif2_data_c"; function = "scif2"; }; - scif4_pins: serial4 { + scif4_pins: scif4 { groups = "scif4_data"; function = "scif4"; }; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 749ba02b6a53..52b56fcaddf2 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -76,28 +76,28 @@ keyboard { compatible = "gpio-keys"; - button@1 { + one { linux,code = <KEY_1>; label = "SW2-1"; wakeup-source; debounce-interval = <20>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; - button@2 { + two { linux,code = <KEY_2>; label = "SW2-2"; wakeup-source; debounce-interval = <20>; gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; }; - button@3 { + three { linux,code = <KEY_3>; label = "SW2-3"; wakeup-source; debounce-interval = <20>; gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; }; - button@4 { + four { linux,code = <KEY_4>; label = "SW2-4"; wakeup-source; @@ -119,7 +119,7 @@ }; }; - fixedregulator3v3: fixedregulator@0 { + fixedregulator3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -128,7 +128,7 @@ regulator-always-on; }; - vcc_sdhi0: regulator@1 { + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; regulator-name = "SDHI0 Vcc"; @@ -139,7 +139,7 @@ enable-active-high; }; - vccq_sdhi0: regulator@2 { + vccq_sdhi0: regulator-vccq-sdhi0 { compatible = "regulator-gpio"; regulator-name = "SDHI0 VccQ"; @@ -152,7 +152,7 @@ 1800000 0>; }; - vcc_sdhi2: regulator@3 { + vcc_sdhi2: regulator-vcc-sdhi2 { compatible = "regulator-fixed"; regulator-name = "SDHI2 Vcc"; @@ -163,7 +163,7 @@ enable-active-high; }; - vccq_sdhi2: regulator@4 { + vccq_sdhi2: regulator-vccq-sdhi2 { compatible = "regulator-gpio"; regulator-name = "SDHI2 VccQ"; @@ -263,7 +263,7 @@ * instantiate the slave device at runtime according to the documentation. * You can then communicate with the slave via IIC3. */ - i2cexio: i2c@8 { + i2cexio: i2c-8 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&iic0>, <&i2c0>; i2c-bus-name = "i2c-exio"; @@ -317,7 +317,7 @@ function = "du"; }; - scif0_pins: serial0 { + scif0_pins: scif0 { groups = "scif0_data"; function = "scif0"; }; @@ -337,7 +337,7 @@ function = "intc"; }; - scifa1_pins: serial1 { + scifa1_pins: scifa1 { groups = "scifa1_data"; function = "scifa1"; }; @@ -371,12 +371,12 @@ function = "mmc1"; }; - qspi_pins: spi0 { + qspi_pins: qspi { groups = "qspi_ctrl", "qspi_data4"; function = "qspi"; }; - msiof1_pins: spi2 { + msiof1_pins: msiof1 { groups = "msiof1_clk", "msiof1_sync", "msiof1_rx", "msiof1_tx"; function = "msiof1"; @@ -427,7 +427,7 @@ function = "usb2"; }; - vin1_pins: vin { + vin1_pins: vin1 { groups = "vin1_data8", "vin1_clk"; function = "vin1"; }; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 83cf23cd26bb..d18558f21102 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -44,6 +44,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "renesas,apmu"; cpu0: cpu@0 { device_type = "cpu"; @@ -92,7 +93,7 @@ next-level-cache = <&L2_CA15>; }; - cpu4: cpu@4 { + cpu4: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x100>; @@ -101,7 +102,7 @@ next-level-cache = <&L2_CA7>; }; - cpu5: cpu@5 { + cpu5: cpu@101 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x101>; @@ -110,7 +111,7 @@ next-level-cache = <&L2_CA7>; }; - cpu6: cpu@6 { + cpu6: cpu@102 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x102>; @@ -119,7 +120,7 @@ next-level-cache = <&L2_CA7>; }; - cpu7: cpu@7 { + cpu7: cpu@103 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x103>; @@ -127,6 +128,22 @@ power-domains = <&sysc R8A7790_PD_CA7_CPU3>; next-level-cache = <&L2_CA7>; }; + + L2_CA15: cache-controller@0 { + compatible = "cache"; + reg = <0>; + power-domains = <&sysc R8A7790_PD_CA15_SCU>; + cache-unified; + cache-level = <2>; + }; + + L2_CA7: cache-controller@100 { + compatible = "cache"; + reg = <0x100>; + power-domains = <&sysc R8A7790_PD_CA7_SCU>; + cache-unified; + cache-level = <2>; + }; }; thermal-zones { @@ -148,18 +165,16 @@ }; }; - L2_CA15: cache-controller@0 { - compatible = "cache"; - power-domains = <&sysc R8A7790_PD_CA15_SCU>; - cache-unified; - cache-level = <2>; + apmu@e6151000 { + compatible = "renesas,r8a7790-apmu", "renesas,apmu"; + reg = <0 0xe6151000 0 0x188>; + cpus = <&cpu4 &cpu5 &cpu6 &cpu7>; }; - L2_CA7: cache-controller@1 { - compatible = "cache"; - power-domains = <&sysc R8A7790_PD_CA7_SCU>; - cache-unified; - cache-level = <2>; + apmu@e6152000 { + compatible = "renesas,r8a7790-apmu", "renesas,apmu"; + reg = <0 0xe6152000 0 0x188>; + cpus = <&cpu0 &cpu1 &cpu2 &cpu3>; }; gic: interrupt-controller@f1001000 { @@ -517,8 +532,9 @@ reg = <0 0xe6500000 0 0x425>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC0>; - dmas = <&dmac0 0x61>, <&dmac0 0x62>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, + <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -530,8 +546,9 @@ reg = <0 0xe6510000 0 0x425>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC1>; - dmas = <&dmac0 0x65>, <&dmac0 0x66>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x65>, <&dmac0 0x66>, + <&dmac1 0x65>, <&dmac1 0x66>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -543,8 +560,9 @@ reg = <0 0xe6520000 0 0x425>; interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC2>; - dmas = <&dmac0 0x69>, <&dmac0 0x6a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x69>, <&dmac0 0x6a>, + <&dmac1 0x69>, <&dmac1 0x6a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -556,8 +574,9 @@ reg = <0 0xe60b0000 0 0x425>; interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>; - dmas = <&dmac0 0x77>, <&dmac0 0x78>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x77>, <&dmac0 0x78>, + <&dmac1 0x77>, <&dmac1 0x78>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -567,8 +586,9 @@ reg = <0 0xee200000 0 0x80>; interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>; - dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, + <&dmac1 0xd1>, <&dmac1 0xd2>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; reg-io-width = <4>; status = "disabled"; @@ -580,8 +600,9 @@ reg = <0 0xee220000 0 0x80>; interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>; - dmas = <&dmac0 0xe1>, <&dmac0 0xe2>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xe1>, <&dmac0 0xe2>, + <&dmac1 0xe1>, <&dmac1 0xe2>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; reg-io-width = <4>; status = "disabled"; @@ -598,8 +619,9 @@ reg = <0 0xee100000 0 0x328>; interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI0>; - dmas = <&dmac1 0xcd>, <&dmac1 0xce>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; max-frequency = <195000000>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; @@ -610,8 +632,9 @@ reg = <0 0xee120000 0 0x328>; interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI1>; - dmas = <&dmac1 0xc9>, <&dmac1 0xca>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xc9>, <&dmac0 0xca>, + <&dmac1 0xc9>, <&dmac1 0xca>; + dma-names = "tx", "rx", "tx", "rx"; max-frequency = <195000000>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; @@ -622,8 +645,9 @@ reg = <0 0xee140000 0 0x100>; interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI2>; - dmas = <&dmac1 0xc1>, <&dmac1 0xc2>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; max-frequency = <97500000>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; @@ -634,8 +658,9 @@ reg = <0 0xee160000 0 0x100>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI3>; - dmas = <&dmac1 0xd3>, <&dmac1 0xd4>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; max-frequency = <97500000>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; @@ -648,8 +673,9 @@ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>; clock-names = "fck"; - dmas = <&dmac0 0x21>, <&dmac0 0x22>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>, + <&dmac1 0x21>, <&dmac1 0x22>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -661,8 +687,9 @@ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>; clock-names = "fck"; - dmas = <&dmac0 0x25>, <&dmac0 0x26>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>, + <&dmac1 0x25>, <&dmac1 0x26>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -674,8 +701,9 @@ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>; clock-names = "fck"; - dmas = <&dmac0 0x27>, <&dmac0 0x28>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>, + <&dmac1 0x27>, <&dmac1 0x28>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -687,8 +715,9 @@ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>; clock-names = "fck"; - dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, + <&dmac1 0x3d>, <&dmac1 0x3e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -700,8 +729,9 @@ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>; clock-names = "fck"; - dmas = <&dmac0 0x19>, <&dmac0 0x1a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>, + <&dmac1 0x19>, <&dmac1 0x1a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -713,8 +743,9 @@ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>; clock-names = "fck"; - dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, + <&dmac1 0x1d>, <&dmac1 0x1e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -727,8 +758,9 @@ clocks = <&mstp7_clks R8A7790_CLK_SCIF0>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x29>, <&dmac0 0x2a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, + <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -741,8 +773,9 @@ clocks = <&mstp7_clks R8A7790_CLK_SCIF1>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, + <&dmac1 0x2d>, <&dmac1 0x2e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -755,8 +788,9 @@ clocks = <&mstp3_clks R8A7790_CLK_SCIF2>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, + <&dmac1 0x2b>, <&dmac1 0x2c>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -769,8 +803,9 @@ clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x39>, <&dmac0 0x3a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -783,8 +818,9 @@ clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -1469,8 +1505,9 @@ reg = <0 0xe6b10000 0 0x2c>; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>; - dmas = <&dmac0 0x17>, <&dmac0 0x18>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; num-cs = <1>; #address-cells = <1>; @@ -1483,8 +1520,9 @@ reg = <0 0xe6e20000 0 0x0064>; interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>; - dmas = <&dmac0 0x51>, <&dmac0 0x52>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x51>, <&dmac0 0x52>, + <&dmac1 0x51>, <&dmac1 0x52>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; @@ -1496,8 +1534,9 @@ reg = <0 0xe6e10000 0 0x0064>; interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>; - dmas = <&dmac0 0x55>, <&dmac0 0x56>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x55>, <&dmac0 0x56>, + <&dmac1 0x55>, <&dmac1 0x56>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; @@ -1509,8 +1548,9 @@ reg = <0 0xe6e00000 0 0x0064>; interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>; - dmas = <&dmac0 0x41>, <&dmac0 0x42>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x41>, <&dmac0 0x42>, + <&dmac1 0x41>, <&dmac1 0x42>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; @@ -1522,8 +1562,9 @@ reg = <0 0xe6c90000 0 0x0064>; interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>; - dmas = <&dmac0 0x45>, <&dmac0 0x46>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x45>, <&dmac0 0x46>, + <&dmac1 0x45>, <&dmac1 0x46>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; @@ -1702,79 +1743,79 @@ status = "disabled"; rcar_sound,dvc { - dvc0: dvc@0 { + dvc0: dvc-0 { dmas = <&audma0 0xbc>; dma-names = "tx"; }; - dvc1: dvc@1 { + dvc1: dvc-1 { dmas = <&audma0 0xbe>; dma-names = "tx"; }; }; rcar_sound,mix { - mix0: mix@0 { }; - mix1: mix@1 { }; + mix0: mix-0 { }; + mix1: mix-1 { }; }; rcar_sound,ctu { - ctu00: ctu@0 { }; - ctu01: ctu@1 { }; - ctu02: ctu@2 { }; - ctu03: ctu@3 { }; - ctu10: ctu@4 { }; - ctu11: ctu@5 { }; - ctu12: ctu@6 { }; - ctu13: ctu@7 { }; + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; }; rcar_sound,src { - src0: src@0 { + src0: src-0 { interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; - src1: src@1 { + src1: src-1 { interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x87>, <&audma1 0x9c>; dma-names = "rx", "tx"; }; - src2: src@2 { + src2: src-2 { interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x89>, <&audma1 0x9e>; dma-names = "rx", "tx"; }; - src3: src@3 { + src3: src-3 { interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8b>, <&audma1 0xa0>; dma-names = "rx", "tx"; }; - src4: src@4 { + src4: src-4 { interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8d>, <&audma1 0xb0>; dma-names = "rx", "tx"; }; - src5: src@5 { + src5: src-5 { interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8f>, <&audma1 0xb2>; dma-names = "rx", "tx"; }; - src6: src@6 { + src6: src-6 { interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x91>, <&audma1 0xb4>; dma-names = "rx", "tx"; }; - src7: src@7 { + src7: src-7 { interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x93>, <&audma1 0xb6>; dma-names = "rx", "tx"; }; - src8: src@8 { + src8: src-8 { interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x95>, <&audma1 0xb8>; dma-names = "rx", "tx"; }; - src9: src@9 { + src9: src-9 { interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x97>, <&audma1 0xba>; dma-names = "rx", "tx"; @@ -1782,52 +1823,52 @@ }; rcar_sound,ssi { - ssi0: ssi@0 { + ssi0: ssi-0 { interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi1: ssi@1 { + ssi1: ssi-1 { interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi2: ssi@2 { + ssi2: ssi-2 { interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi3: ssi@3 { + ssi3: ssi-3 { interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi4: ssi@4 { + ssi4: ssi-4 { interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi5: ssi@5 { + ssi5: ssi-5 { interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi6: ssi@6 { + ssi6: ssi-6 { interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi7: ssi@7 { + ssi7: ssi-7 { interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi8: ssi@8 { + ssi8: ssi-8 { interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi9: ssi@9 { + ssi9: ssi-9 { interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; dma-names = "rx", "tx", "rxu", "txu"; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index da59c2844b8a..f8a7d090fd01 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -170,7 +170,7 @@ }; }; - vcc_sdhi0: regulator@0 { + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; regulator-name = "SDHI0 Vcc"; @@ -181,7 +181,7 @@ enable-active-high; }; - vccq_sdhi0: regulator@1 { + vccq_sdhi0: regulator-vccq-sdhi0 { compatible = "regulator-gpio"; regulator-name = "SDHI0 VccQ"; @@ -194,7 +194,7 @@ 1800000 0>; }; - vcc_sdhi1: regulator@2 { + vcc_sdhi1: regulator-vcc-sdhi1 { compatible = "regulator-fixed"; regulator-name = "SDHI1 Vcc"; @@ -205,7 +205,7 @@ enable-active-high; }; - vccq_sdhi1: regulator@3 { + vccq_sdhi1: regulator-vccq-sdhi1 { compatible = "regulator-gpio"; regulator-name = "SDHI1 VccQ"; @@ -218,7 +218,7 @@ 1800000 0>; }; - vcc_sdhi2: regulator@4 { + vcc_sdhi2: regulator-vcc-sdhi2 { compatible = "regulator-fixed"; regulator-name = "SDHI2 Vcc"; @@ -229,7 +229,7 @@ enable-active-high; }; - vccq_sdhi2: regulator@5 { + vccq_sdhi2: regulator-vccq-sdhi2 { compatible = "regulator-gpio"; regulator-name = "SDHI2 VccQ"; @@ -332,12 +332,12 @@ function = "du"; }; - scif0_pins: serial0 { + scif0_pins: scif0 { groups = "scif0_data_d"; function = "scif0"; }; - scif1_pins: serial1 { + scif1_pins: scif1 { groups = "scif1_data_d"; function = "scif1"; }; @@ -372,12 +372,12 @@ function = "sdhi2"; }; - qspi_pins: spi0 { + qspi_pins: qspi { groups = "qspi_ctrl", "qspi_data4"; function = "qspi"; }; - msiof0_pins: spi1 { + msiof0_pins: msiof0 { groups = "msiof0_clk", "msiof0_sync", "msiof0_rx", "msiof0_tx"; function = "msiof0"; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index 6a1bb1a8209b..6761d11d3f9e 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -46,7 +46,7 @@ reg = <2 0x00000000 0 0x40000000>; }; - vcc_sdhi0: regulator@0 { + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; regulator-name = "SDHI0 Vcc"; @@ -55,7 +55,7 @@ regulator-always-on; }; - vccq_sdhi0: regulator@1 { + vccq_sdhi0: regulator-vccq-sdhi0 { compatible = "regulator-gpio"; regulator-name = "SDHI0 VccQ"; @@ -68,7 +68,7 @@ 1800000 0>; }; - vcc_sdhi2: regulator@2 { + vcc_sdhi2: regulator-vcc-sdhi2 { compatible = "regulator-fixed"; regulator-name = "SDHI2 Vcc"; @@ -77,7 +77,7 @@ regulator-always-on; }; - vccq_sdhi2: regulator@3 { + vccq_sdhi2: regulator-vccq-sdhi2 { compatible = "regulator-gpio"; regulator-name = "SDHI2 VccQ"; @@ -142,7 +142,7 @@ }; &pfc { - scif0_pins: serial0 { + scif0_pins: scif0 { groups = "scif0_data_d"; function = "scif0"; }; @@ -167,7 +167,7 @@ function = "sdhi2"; }; - qspi_pins: spi0 { + qspi_pins: qspi { groups = "qspi_ctrl", "qspi_data4"; function = "qspi"; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index db67e342c585..8f0086bbd96b 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -43,6 +43,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "renesas,apmu"; cpu0: cpu@0 { device_type = "cpu"; @@ -72,6 +73,14 @@ power-domains = <&sysc R8A7791_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; }; + + L2_CA15: cache-controller@0 { + compatible = "cache"; + reg = <0>; + power-domains = <&sysc R8A7791_PD_CA15_SCU>; + cache-unified; + cache-level = <2>; + }; }; thermal-zones { @@ -93,11 +102,10 @@ }; }; - L2_CA15: cache-controller@0 { - compatible = "cache"; - power-domains = <&sysc R8A7791_PD_CA15_SCU>; - cache-unified; - cache-level = <2>; + apmu@e6152000 { + compatible = "renesas,r8a7791-apmu", "renesas,apmu"; + reg = <0 0xe6152000 0 0x188>; + cpus = <&cpu0 &cpu1>; }; gic: interrupt-controller@f1001000 { @@ -514,8 +522,9 @@ reg = <0 0xe60b0000 0 0x425>; interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>; - dmas = <&dmac0 0x77>, <&dmac0 0x78>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x77>, <&dmac0 0x78>, + <&dmac1 0x77>, <&dmac1 0x78>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -527,8 +536,9 @@ reg = <0 0xe6500000 0 0x425>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_IIC0>; - dmas = <&dmac0 0x61>, <&dmac0 0x62>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, + <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -540,8 +550,9 @@ reg = <0 0xe6510000 0 0x425>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_IIC1>; - dmas = <&dmac0 0x65>, <&dmac0 0x66>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x65>, <&dmac0 0x66>, + <&dmac1 0x65>, <&dmac1 0x66>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -556,8 +567,9 @@ reg = <0 0xee200000 0 0x80>; interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>; - dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, + <&dmac1 0xd1>, <&dmac1 0xd2>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; reg-io-width = <4>; status = "disabled"; @@ -569,8 +581,9 @@ reg = <0 0xee100000 0 0x328>; interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI0>; - dmas = <&dmac1 0xcd>, <&dmac1 0xce>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -580,8 +593,9 @@ reg = <0 0xee140000 0 0x100>; interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI1>; - dmas = <&dmac1 0xc1>, <&dmac1 0xc2>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -591,8 +605,9 @@ reg = <0 0xee160000 0 0x100>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI2>; - dmas = <&dmac1 0xd3>, <&dmac1 0xd4>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -604,8 +619,9 @@ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>; clock-names = "fck"; - dmas = <&dmac0 0x21>, <&dmac0 0x22>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>, + <&dmac1 0x21>, <&dmac1 0x22>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -617,8 +633,9 @@ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>; clock-names = "fck"; - dmas = <&dmac0 0x25>, <&dmac0 0x26>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>, + <&dmac1 0x25>, <&dmac1 0x26>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -630,8 +647,9 @@ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>; clock-names = "fck"; - dmas = <&dmac0 0x27>, <&dmac0 0x28>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>, + <&dmac1 0x27>, <&dmac1 0x28>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -643,8 +661,9 @@ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>; clock-names = "fck"; - dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, + <&dmac1 0x1b>, <&dmac1 0x1c>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -656,8 +675,9 @@ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>; clock-names = "fck"; - dmas = <&dmac0 0x1f>, <&dmac0 0x20>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x1f>, <&dmac0 0x20>, + <&dmac1 0x1f>, <&dmac1 0x20>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -669,8 +689,9 @@ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>; clock-names = "fck"; - dmas = <&dmac0 0x23>, <&dmac0 0x24>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x23>, <&dmac0 0x24>, + <&dmac1 0x23>, <&dmac1 0x24>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -682,8 +703,9 @@ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>; clock-names = "fck"; - dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, + <&dmac1 0x3d>, <&dmac1 0x3e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -695,8 +717,9 @@ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>; clock-names = "fck"; - dmas = <&dmac0 0x19>, <&dmac0 0x1a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>, + <&dmac1 0x19>, <&dmac1 0x1a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -708,8 +731,9 @@ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>; clock-names = "fck"; - dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, + <&dmac1 0x1d>, <&dmac1 0x1e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -722,8 +746,9 @@ clocks = <&mstp7_clks R8A7791_CLK_SCIF0>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x29>, <&dmac0 0x2a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, + <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -736,8 +761,9 @@ clocks = <&mstp7_clks R8A7791_CLK_SCIF1>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, + <&dmac1 0x2d>, <&dmac1 0x2e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -750,8 +776,9 @@ clocks = <&mstp7_clks R8A7791_CLK_SCIF2>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, + <&dmac1 0x2b>, <&dmac1 0x2c>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -764,8 +791,9 @@ clocks = <&mstp7_clks R8A7791_CLK_SCIF3>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2f>, <&dmac0 0x30>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x2f>, <&dmac0 0x30>, + <&dmac1 0x2f>, <&dmac1 0x30>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -778,8 +806,9 @@ clocks = <&mstp7_clks R8A7791_CLK_SCIF4>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, + <&dmac1 0xfb>, <&dmac1 0xfc>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -792,8 +821,9 @@ clocks = <&mstp7_clks R8A7791_CLK_SCIF5>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, + <&dmac1 0xfd>, <&dmac1 0xfe>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -806,8 +836,9 @@ clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x39>, <&dmac0 0x3a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -820,8 +851,9 @@ clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -834,8 +866,9 @@ clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, + <&dmac1 0x3b>, <&dmac1 0x3c>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -1478,8 +1511,9 @@ reg = <0 0xe6b10000 0 0x2c>; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>; - dmas = <&dmac0 0x17>, <&dmac0 0x18>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; num-cs = <1>; #address-cells = <1>; @@ -1492,8 +1526,9 @@ reg = <0 0xe6e20000 0 0x0064>; interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; - dmas = <&dmac0 0x51>, <&dmac0 0x52>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x51>, <&dmac0 0x52>, + <&dmac1 0x51>, <&dmac1 0x52>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; @@ -1505,8 +1540,9 @@ reg = <0 0xe6e10000 0 0x0064>; interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>; - dmas = <&dmac0 0x55>, <&dmac0 0x56>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x55>, <&dmac0 0x56>, + <&dmac1 0x55>, <&dmac1 0x56>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; @@ -1518,8 +1554,9 @@ reg = <0 0xe6e00000 0 0x0064>; interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>; - dmas = <&dmac0 0x41>, <&dmac0 0x42>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x41>, <&dmac0 0x42>, + <&dmac1 0x41>, <&dmac1 0x42>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; @@ -1737,79 +1774,79 @@ status = "disabled"; rcar_sound,dvc { - dvc0: dvc@0 { + dvc0: dvc-0 { dmas = <&audma0 0xbc>; dma-names = "tx"; }; - dvc1: dvc@1 { + dvc1: dvc-1 { dmas = <&audma0 0xbe>; dma-names = "tx"; }; }; rcar_sound,mix { - mix0: mix@0 { }; - mix1: mix@1 { }; + mix0: mix-0 { }; + mix1: mix-1 { }; }; rcar_sound,ctu { - ctu00: ctu@0 { }; - ctu01: ctu@1 { }; - ctu02: ctu@2 { }; - ctu03: ctu@3 { }; - ctu10: ctu@4 { }; - ctu11: ctu@5 { }; - ctu12: ctu@6 { }; - ctu13: ctu@7 { }; + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; }; rcar_sound,src { - src0: src@0 { + src0: src-0 { interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; - src1: src@1 { + src1: src-1 { interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x87>, <&audma1 0x9c>; dma-names = "rx", "tx"; }; - src2: src@2 { + src2: src-2 { interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x89>, <&audma1 0x9e>; dma-names = "rx", "tx"; }; - src3: src@3 { + src3: src-3 { interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8b>, <&audma1 0xa0>; dma-names = "rx", "tx"; }; - src4: src@4 { + src4: src-4 { interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8d>, <&audma1 0xb0>; dma-names = "rx", "tx"; }; - src5: src@5 { + src5: src-5 { interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8f>, <&audma1 0xb2>; dma-names = "rx", "tx"; }; - src6: src@6 { + src6: src-6 { interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x91>, <&audma1 0xb4>; dma-names = "rx", "tx"; }; - src7: src@7 { + src7: src-7 { interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x93>, <&audma1 0xb6>; dma-names = "rx", "tx"; }; - src8: src@8 { + src8: src-8 { interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x95>, <&audma1 0xb8>; dma-names = "rx", "tx"; }; - src9: src@9 { + src9: src-9 { interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x97>, <&audma1 0xba>; dma-names = "rx", "tx"; @@ -1817,52 +1854,52 @@ }; rcar_sound,ssi { - ssi0: ssi@0 { + ssi0: ssi-0 { interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi1: ssi@1 { + ssi1: ssi-1 { interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi2: ssi@2 { + ssi2: ssi-2 { interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi3: ssi@3 { + ssi3: ssi-3 { interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi4: ssi@4 { + ssi4: ssi-4 { interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi5: ssi@5 { + ssi5: ssi-5 { interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi6: ssi@6 { + ssi6: ssi-6 { interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi7: ssi@7 { + ssi7: ssi-7 { interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi8: ssi@8 { + ssi8: ssi-8 { interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi9: ssi@9 { + ssi9: ssi-9 { interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; dma-names = "rx", "tx", "rxu", "txu"; diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts new file mode 100644 index 000000000000..e7b40f0e7da6 --- /dev/null +++ b/arch/arm/boot/dts/r8a7792-blanche.dts @@ -0,0 +1,66 @@ +/* + * Device Tree Source for the Blanche board + * + * Copyright (C) 2014 Renesas Electronics Corporation + * Copyright (C) 2016 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7792.dtsi" + +/ { + model = "Blanche"; + compatible = "renesas,blanche", "renesas,r8a7792"; + + aliases { + serial0 = &scif0; + serial1 = &scif3; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; + + d3_3v: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "D3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ethernet@18000000 { + compatible = "smsc,lan89218", "smsc,lan9115"; + reg = <0 0x18000000 0 0x100>; + phy-mode = "mii"; + interrupt-parent = <&irqc>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + smsc,irq-push-pull; + reg-io-width = <4>; + vddvario-supply = <&d3_3v>; + vdd33a-supply = <&d3_3v>; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&scif0 { + status = "okay"; +}; + +&scif3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi new file mode 100644 index 000000000000..3fd61d7ab906 --- /dev/null +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -0,0 +1,385 @@ +/* + * Device Tree Source for the r8a7792 SoC + * + * Copyright (C) 2016 Cogent Embedded Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/clock/r8a7792-clock.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/r8a7792-sysc.h> + +/ { + compatible = "renesas,r8a7792"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "renesas,apmu"; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + clock-frequency = <1000000000>; + clocks = <&cpg_clocks R8A7792_CLK_Z>; + power-domains = <&sysc R8A7792_PD_CA15_CPU0>; + next-level-cache = <&L2_CA15>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + clock-frequency = <1000000000>; + power-domains = <&sysc R8A7792_PD_CA15_CPU1>; + next-level-cache = <&L2_CA15>; + }; + + L2_CA15: cache-controller@0 { + compatible = "cache"; + reg = <0>; + cache-unified; + cache-level = <2>; + power-domains = <&sysc R8A7792_PD_CA15_SCU>; + }; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + apmu@e6152000 { + compatible = "renesas,r8a7792-apmu", "renesas,apmu"; + reg = <0 0xe6152000 0 0x188>; + cpus = <&cpu0 &cpu1>; + }; + + gic: interrupt-controller@f1001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, + <0 0xf1002000 0 0x1000>, + <0 0xf1004000 0 0x2000>, + <0 0xf1006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + irqc: interrupt-controller@e61c0000 { + compatible = "renesas,irqc-r8a7792", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A7792_CLK_IRQC>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7792-sysc"; + reg = <0 0xe6180000 0 0x0200>; + #power-domain-cells = <1>; + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a7792", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7792_CLK_SYS_DMAC0>; + clock-names = "fck"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,dmac-r8a7792", + "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7792_CLK_SYS_DMAC1>; + clock-names = "fck"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7792", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7792_CLK_SCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, + <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a7792", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7792_CLK_SCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, + <&dmac1 0x2d>, <&dmac1 0x2e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif2: serial@e6e58000 { + compatible = "renesas,scif-r8a7792", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e58000 0 64>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7792_CLK_SCIF2>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, + <&dmac1 0x2b>, <&dmac1 0x2c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif3: serial@e6ea8000 { + compatible = "renesas,scif-r8a7792", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ea8000 0 64>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7792_CLK_SCIF3>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2f>, <&dmac0 0x30>, + <&dmac1 0x2f>, <&dmac1 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif0: serial@e62c0000 { + compatible = "renesas,hscif-r8a7792", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c0000 0 96>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7792_CLK_HSCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif1: serial@e62c8000 { + compatible = "renesas,hscif-r8a7792", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c8000 0 96>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7792_CLK_HSCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + status = "disabled"; + }; + + jpu: jpeg-codec@fe980000 { + compatible = "renesas,jpu-r8a7792", + "renesas,rcar-gen2-jpu"; + reg = <0 0xfe980000 0 0x10300>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7792_CLK_JPU>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + }; + + /* Special CPG clocks */ + cpg_clocks: cpg_clocks@e6150000 { + compatible = "renesas,r8a7792-cpg-clocks", + "renesas,rcar-gen2-cpg-clocks"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>; + #clock-cells = <1>; + clock-output-names = "main", "pll0", "pll1", "pll3", + "lb", "qspi", "z"; + #power-domain-cells = <0>; + }; + + /* Fixed factor clocks */ + pll1_div2_clk: pll1_div2 { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7792_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + }; + zs_clk: zs { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7792_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <6>; + clock-mult = <1>; + }; + p_clk: p { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7792_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <24>; + clock-mult = <1>; + }; + cp_clk: cp { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7792_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <48>; + clock-mult = <1>; + }; + m2_clk: m2 { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7792_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + }; + + /* Gate clocks */ + mstp1_clks: mstp1_clks@e6150134 { + compatible = "renesas,r8a7792-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; + clocks = <&m2_clk>; + #clock-cells = <1>; + clock-indices = <R8A7792_CLK_JPU>; + clock-output-names = "jpu"; + }; + mstp2_clks: mstp2_clks@e6150138 { + compatible = "renesas,r8a7792-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; + clocks = <&zs_clk>, <&zs_clk>; + #clock-cells = <1>; + clock-indices = < + R8A7792_CLK_SYS_DMAC1 R8A7792_CLK_SYS_DMAC0 + >; + clock-output-names = "sys-dmac1", "sys-dmac0"; + }; + mstp4_clks: mstp4_clks@e6150140 { + compatible = "renesas,r8a7792-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; + clocks = <&cp_clk>; + #clock-cells = <1>; + clock-indices = <R8A7792_CLK_IRQC>; + clock-output-names = "irqc"; + }; + mstp7_clks: mstp7_clks@e615014c { + compatible = "renesas,r8a7792-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; + clocks = <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, + <&p_clk>, <&p_clk>; + #clock-cells = <1>; + clock-indices = < + R8A7792_CLK_HSCIF1 R8A7792_CLK_HSCIF0 + R8A7792_CLK_SCIF3 R8A7792_CLK_SCIF2 + R8A7792_CLK_SCIF1 R8A7792_CLK_SCIF0 + >; + clock-output-names = "hscif1", "hscif0", "scif3", + "scif2", "scif1", "scif0"; + }; + }; + + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; +}; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 0ebc3ee34923..90af18600124 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -158,7 +158,7 @@ }; }; - vcc_sdhi0: regulator@0 { + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; regulator-name = "SDHI0 Vcc"; @@ -169,7 +169,7 @@ enable-active-high; }; - vccq_sdhi0: regulator@1 { + vccq_sdhi0: regulator-vccq-sdhi0 { compatible = "regulator-gpio"; regulator-name = "SDHI0 VccQ"; @@ -182,7 +182,7 @@ 1800000 0>; }; - vcc_sdhi1: regulator@2 { + vcc_sdhi1: regulator-vcc-sdhi1 { compatible = "regulator-fixed"; regulator-name = "SDHI1 Vcc"; @@ -193,7 +193,7 @@ enable-active-high; }; - vccq_sdhi1: regulator@3 { + vccq_sdhi1: regulator-vccq-sdhi1 { compatible = "regulator-gpio"; regulator-name = "SDHI1 VccQ"; @@ -206,7 +206,7 @@ 1800000 0>; }; - vcc_sdhi2: regulator@4 { + vcc_sdhi2: regulator-vcc-sdhi2 { compatible = "regulator-fixed"; regulator-name = "SDHI2 Vcc"; @@ -217,7 +217,7 @@ enable-active-high; }; - vccq_sdhi2: regulator@5 { + vccq_sdhi2: regulator-vccq-sdhi2 { compatible = "regulator-gpio"; regulator-name = "SDHI2 VccQ"; @@ -320,12 +320,12 @@ function = "du"; }; - scif0_pins: serial0 { + scif0_pins: scif0 { groups = "scif0_data_d"; function = "scif0"; }; - scif1_pins: serial1 { + scif1_pins: scif1 { groups = "scif1_data_d"; function = "scif1"; }; @@ -360,7 +360,7 @@ renesas,function = "sdhi2"; }; - qspi_pins: spi0 { + qspi_pins: qspi { groups = "qspi_ctrl", "qspi_data4"; function = "qspi"; }; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 1dd6d202cd4c..8d02aacf2892 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -35,6 +35,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "renesas,apmu"; cpu0: cpu@0 { device_type = "cpu"; @@ -55,6 +56,28 @@ < 375000 1000000>; next-level-cache = <&L2_CA15>; }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + clock-frequency = <1500000000>; + power-domains = <&sysc R8A7793_PD_CA15_CPU1>; + }; + + L2_CA15: cache-controller@0 { + compatible = "cache"; + reg = <0>; + power-domains = <&sysc R8A7793_PD_CA15_SCU>; + cache-unified; + cache-level = <2>; + }; + }; + + apmu@e6152000 { + compatible = "renesas,r8a7793-apmu", "renesas,apmu"; + reg = <0 0xe6152000 0 0x188>; + cpus = <&cpu0 &cpu1>; }; thermal-zones { @@ -76,13 +99,6 @@ }; }; - L2_CA15: cache-controller@0 { - compatible = "cache"; - power-domains = <&sysc R8A7793_PD_CA15_SCU>; - cache-unified; - cache-level = <2>; - }; - gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -473,8 +489,9 @@ reg = <0 0xe60b0000 0 0x425>; interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>; - dmas = <&dmac0 0x77>, <&dmac0 0x78>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x77>, <&dmac0 0x78>, + <&dmac1 0x77>, <&dmac1 0x78>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -486,8 +503,9 @@ reg = <0 0xe6500000 0 0x425>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7793_CLK_IIC0>; - dmas = <&dmac0 0x61>, <&dmac0 0x62>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, + <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -499,8 +517,9 @@ reg = <0 0xe6510000 0 0x425>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7793_CLK_IIC1>; - dmas = <&dmac0 0x65>, <&dmac0 0x66>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x65>, <&dmac0 0x66>, + <&dmac1 0x65>, <&dmac1 0x66>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -515,8 +534,9 @@ reg = <0 0xee100000 0 0x328>; interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7793_CLK_SDHI0>; - dmas = <&dmac0 0xcd>, <&dmac0 0xce>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -526,8 +546,9 @@ reg = <0 0xee140000 0 0x100>; interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7793_CLK_SDHI1>; - dmas = <&dmac0 0xc1>, <&dmac0 0xc2>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -537,10 +558,25 @@ reg = <0 0xee160000 0 0x100>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7793_CLK_SDHI2>; - dmas = <&dmac0 0xd3>, <&dmac0 0xd4>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + status = "disabled"; + }; + + mmcif0: mmc@ee200000 { + compatible = "renesas,mmcif-r8a7793", "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7793_CLK_MMCIF0>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, + <&dmac1 0xd1>, <&dmac1 0xd2>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + reg-io-width = <4>; status = "disabled"; + max-frequency = <97500000>; }; scifa0: serial@e6c40000 { @@ -550,8 +586,9 @@ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFA0>; clock-names = "fck"; - dmas = <&dmac0 0x21>, <&dmac0 0x22>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>, + <&dmac1 0x21>, <&dmac1 0x22>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -563,8 +600,9 @@ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFA1>; clock-names = "fck"; - dmas = <&dmac0 0x25>, <&dmac0 0x26>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>, + <&dmac1 0x25>, <&dmac1 0x26>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -576,8 +614,9 @@ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFA2>; clock-names = "fck"; - dmas = <&dmac0 0x27>, <&dmac0 0x28>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>, + <&dmac1 0x27>, <&dmac1 0x28>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -589,8 +628,9 @@ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7793_CLK_SCIFA3>; clock-names = "fck"; - dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, + <&dmac1 0x1b>, <&dmac1 0x1c>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -602,8 +642,9 @@ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7793_CLK_SCIFA4>; clock-names = "fck"; - dmas = <&dmac0 0x1f>, <&dmac0 0x20>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x1f>, <&dmac0 0x20>, + <&dmac1 0x1f>, <&dmac1 0x20>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -615,8 +656,9 @@ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7793_CLK_SCIFA5>; clock-names = "fck"; - dmas = <&dmac0 0x23>, <&dmac0 0x24>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x23>, <&dmac0 0x24>, + <&dmac1 0x23>, <&dmac1 0x24>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -628,8 +670,9 @@ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>; clock-names = "fck"; - dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, + <&dmac1 0x3d>, <&dmac1 0x3e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -641,8 +684,9 @@ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>; clock-names = "fck"; - dmas = <&dmac0 0x19>, <&dmac0 0x1a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>, + <&dmac1 0x19>, <&dmac1 0x1a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -654,8 +698,9 @@ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>; clock-names = "fck"; - dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, + <&dmac1 0x1d>, <&dmac1 0x1e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -668,8 +713,9 @@ clocks = <&mstp7_clks R8A7793_CLK_SCIF0>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x29>, <&dmac0 0x2a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, + <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -682,8 +728,9 @@ clocks = <&mstp7_clks R8A7793_CLK_SCIF1>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, + <&dmac1 0x2d>, <&dmac1 0x2e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -696,8 +743,9 @@ clocks = <&mstp7_clks R8A7793_CLK_SCIF2>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, + <&dmac1 0x2b>, <&dmac1 0x2c>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -710,8 +758,9 @@ clocks = <&mstp7_clks R8A7793_CLK_SCIF3>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2f>, <&dmac0 0x30>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x2f>, <&dmac0 0x30>, + <&dmac1 0x2f>, <&dmac1 0x30>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -724,8 +773,9 @@ clocks = <&mstp7_clks R8A7793_CLK_SCIF4>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, + <&dmac1 0xfb>, <&dmac1 0xfc>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -738,8 +788,9 @@ clocks = <&mstp7_clks R8A7793_CLK_SCIF5>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, + <&dmac1 0xfd>, <&dmac1 0xfe>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -752,8 +803,9 @@ clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x39>, <&dmac0 0x3a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -766,8 +818,9 @@ clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -780,8 +833,9 @@ clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, + <&dmac1 0x3b>, <&dmac1 0x3c>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -803,8 +857,9 @@ reg = <0 0xe6b10000 0 0x2c>; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_QSPI_MOD>; - dmas = <&dmac0 0x17>, <&dmac0 0x18>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; num-cs = <1>; #address-cells = <1>; @@ -1330,63 +1385,63 @@ status = "disabled"; rcar_sound,dvc { - dvc0: dvc@0 { + dvc0: dvc-0 { dmas = <&audma0 0xbc>; dma-names = "tx"; }; - dvc1: dvc@1 { + dvc1: dvc-1 { dmas = <&audma0 0xbe>; dma-names = "tx"; }; }; rcar_sound,src { - src0: src@0 { + src0: src-0 { interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; - src1: src@1 { + src1: src-1 { interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x87>, <&audma1 0x9c>; dma-names = "rx", "tx"; }; - src2: src@2 { + src2: src-2 { interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x89>, <&audma1 0x9e>; dma-names = "rx", "tx"; }; - src3: src@3 { + src3: src-3 { interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8b>, <&audma1 0xa0>; dma-names = "rx", "tx"; }; - src4: src@4 { + src4: src-4 { interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8d>, <&audma1 0xb0>; dma-names = "rx", "tx"; }; - src5: src@5 { + src5: src-5 { interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8f>, <&audma1 0xb2>; dma-names = "rx", "tx"; }; - src6: src@6 { + src6: src-6 { interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x91>, <&audma1 0xb4>; dma-names = "rx", "tx"; }; - src7: src@7 { + src7: src-7 { interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x93>, <&audma1 0xb6>; dma-names = "rx", "tx"; }; - src8: src@8 { + src8: src-8 { interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x95>, <&audma1 0xb8>; dma-names = "rx", "tx"; }; - src9: src@9 { + src9: src-9 { interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x97>, <&audma1 0xba>; dma-names = "rx", "tx"; @@ -1394,52 +1449,52 @@ }; rcar_sound,ssi { - ssi0: ssi@0 { + ssi0: ssi-0 { interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi1: ssi@1 { + ssi1: ssi-1 { interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi2: ssi@2 { + ssi2: ssi-2 { interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi3: ssi@3 { + ssi3: ssi-3 { interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi4: ssi@4 { + ssi4: ssi-4 { interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi5: ssi@5 { + ssi5: ssi-5 { interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi6: ssi@6 { + ssi6: ssi-6 { interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi7: ssi@7 { + ssi7: ssi-7 { interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi8: ssi@8 { + ssi8: ssi-8 { interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi9: ssi@9 { + ssi9: ssi-9 { interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; dma-names = "rx", "tx", "rxu", "txu"; diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index 383ad791f1db..1ad37d431a2a 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -111,7 +111,7 @@ function = "du"; }; - scif2_pins: serial2 { + scif2_pins: scif2 { groups = "scif2_data"; function = "scif2"; }; @@ -147,7 +147,7 @@ }; &pfc { - qspi_pins: spi0 { + qspi_pins: qspi { groups = "qspi_ctrl", "qspi_data4"; function = "qspi"; }; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index 56d98d5b2185..cf24f45fff22 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -32,7 +32,7 @@ reg = <0 0x40000000 0 0x40000000>; }; - d3_3v: regulator@0 { + d3_3v: regulator-d3-3v { compatible = "regulator-fixed"; regulator-name = "D3.3V"; regulator-min-microvolt = <3300000>; @@ -41,7 +41,7 @@ regulator-always-on; }; - vcc_sdhi1: regulator@3 { + vcc_sdhi1: regulator-vcc-sdhi1 { compatible = "regulator-fixed"; regulator-name = "SDHI1 Vcc"; @@ -52,7 +52,7 @@ enable-active-high; }; - vccq_sdhi1: regulator@4 { + vccq_sdhi1: regulator-vccq-sdhi1 { compatible = "regulator-gpio"; regulator-name = "SDHI1 VccQ"; @@ -129,7 +129,7 @@ pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; - scif2_pins: serial2 { + scif2_pins: scif2 { groups = "scif2_data"; function = "scif2"; }; @@ -164,7 +164,7 @@ function = "sdhi1"; }; - qspi_pins: spi0 { + qspi_pins: qspi { groups = "qspi_ctrl", "qspi_data4"; function = "qspi"; }; @@ -183,6 +183,16 @@ groups = "usb1"; function = "usb1"; }; + + du0_pins: du0 { + groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out"; + function = "du0"; + }; + + du1_pins: du1 { + groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out"; + function = "du1"; + }; }; &scif2 { @@ -360,6 +370,8 @@ }; &du { + pinctrl-0 = <&du0_pins &du1_pins>; + pinctrl-names = "default"; status = "okay"; clocks = <&mstp7_clks R8A7794_CLK_DU0>, diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index f334a3a715f2..685f986cf962 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -55,13 +55,14 @@ power-domains = <&sysc R8A7794_PD_CA7_CPU1>; next-level-cache = <&L2_CA7>; }; - }; - L2_CA7: cache-controller@1 { - compatible = "cache"; - power-domains = <&sysc R8A7794_PD_CA7_SCU>; - cache-unified; - cache-level = <2>; + L2_CA7: cache-controller@0 { + compatible = "cache"; + reg = <0>; + power-domains = <&sysc R8A7794_PD_CA7_SCU>; + cache-unified; + cache-level = <2>; + }; }; gic: interrupt-controller@f1001000 { @@ -302,8 +303,9 @@ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>; clock-names = "fck"; - dmas = <&dmac0 0x21>, <&dmac0 0x22>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>, + <&dmac1 0x21>, <&dmac1 0x22>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -315,8 +317,9 @@ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>; clock-names = "fck"; - dmas = <&dmac0 0x25>, <&dmac0 0x26>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>, + <&dmac1 0x25>, <&dmac1 0x26>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -328,8 +331,9 @@ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>; clock-names = "fck"; - dmas = <&dmac0 0x27>, <&dmac0 0x28>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>, + <&dmac1 0x27>, <&dmac1 0x28>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -341,8 +345,9 @@ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>; clock-names = "fck"; - dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, + <&dmac1 0x1b>, <&dmac1 0x1c>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -354,8 +359,9 @@ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>; clock-names = "fck"; - dmas = <&dmac0 0x1f>, <&dmac0 0x20>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x1f>, <&dmac0 0x20>, + <&dmac1 0x1f>, <&dmac1 0x20>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -367,8 +373,9 @@ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>; clock-names = "fck"; - dmas = <&dmac0 0x23>, <&dmac0 0x24>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x23>, <&dmac0 0x24>, + <&dmac1 0x23>, <&dmac1 0x24>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -380,8 +387,9 @@ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>; clock-names = "fck"; - dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, + <&dmac1 0x3d>, <&dmac1 0x3e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -393,8 +401,9 @@ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>; clock-names = "fck"; - dmas = <&dmac0 0x19>, <&dmac0 0x1a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>, + <&dmac1 0x19>, <&dmac1 0x1a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -406,8 +415,9 @@ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>; clock-names = "fck"; - dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, + <&dmac1 0x1d>, <&dmac1 0x1e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -420,8 +430,9 @@ clocks = <&mstp7_clks R8A7794_CLK_SCIF0>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x29>, <&dmac0 0x2a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, + <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -434,8 +445,9 @@ clocks = <&mstp7_clks R8A7794_CLK_SCIF1>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, + <&dmac1 0x2d>, <&dmac1 0x2e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -448,8 +460,9 @@ clocks = <&mstp7_clks R8A7794_CLK_SCIF2>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, + <&dmac1 0x2b>, <&dmac1 0x2c>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -462,8 +475,9 @@ clocks = <&mstp7_clks R8A7794_CLK_SCIF3>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2f>, <&dmac0 0x30>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x2f>, <&dmac0 0x30>, + <&dmac1 0x2f>, <&dmac1 0x30>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -476,8 +490,9 @@ clocks = <&mstp7_clks R8A7794_CLK_SCIF4>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, + <&dmac1 0xfb>, <&dmac1 0xfc>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -490,8 +505,9 @@ clocks = <&mstp7_clks R8A7794_CLK_SCIF5>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, + <&dmac1 0xfd>, <&dmac1 0xfe>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -504,8 +520,9 @@ clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x39>, <&dmac0 0x3a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -518,8 +535,9 @@ clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -532,8 +550,9 @@ clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, + <&dmac1 0x3b>, <&dmac1 0x3c>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -640,8 +659,9 @@ reg = <0 0xe6500000 0 0x425>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_IIC0>; - dmas = <&dmac0 0x61>, <&dmac0 0x62>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, + <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; @@ -653,8 +673,9 @@ reg = <0 0xe6510000 0 0x425>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_IIC1>; - dmas = <&dmac0 0x65>, <&dmac0 0x66>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x65>, <&dmac0 0x66>, + <&dmac1 0x65>, <&dmac1 0x66>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; @@ -666,8 +687,9 @@ reg = <0 0xee200000 0 0x80>; interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>; - dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, + <&dmac1 0xd1>, <&dmac1 0xd2>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; reg-io-width = <4>; status = "disabled"; @@ -678,6 +700,9 @@ reg = <0 0xee100000 0 0x200>; interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_SDHI0>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -687,6 +712,9 @@ reg = <0 0xee140000 0 0x100>; interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_SDHI1>; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -696,6 +724,9 @@ reg = <0 0xee160000 0 0x100>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_SDHI2>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -705,8 +736,9 @@ reg = <0 0xe6b10000 0 0x2c>; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>; - dmas = <&dmac0 0x17>, <&dmac0 0x18>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; num-cs = <1>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts index 5956e8246abe..904668e2e666 100644 --- a/arch/arm/boot/dts/rk3228-evb.dts +++ b/arch/arm/boot/dts/rk3228-evb.dts @@ -40,7 +40,7 @@ /dts-v1/; -#include "rk3228.dtsi" +#include "rk322x.dtsi" / { model = "Rockchip RK3228 Evaluation board"; diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts new file mode 100644 index 000000000000..b6a12035a6bb --- /dev/null +++ b/arch/arm/boot/dts/rk3229-evb.dts @@ -0,0 +1,90 @@ +/* + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "rk322x.dtsi" + +/ { + model = "Rockchip RK3229 Evaluation board"; + compatible = "rockchip,rk3229-evb", "rockchip,rk3229"; + + memory { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; + + ext_gmac: ext_gmac { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + #clock-cells = <0>; + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + enable-active-high; + regulator-name = "vcc_phy"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&gmac { + assigned-clocks = <&cru SCLK_MAC_EXTCLK>, <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>, <&cru SCLK_MAC_EXTCLK>; + clock_in_out = "input"; + phy-supply = <&vcc_phy>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio2 24 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3228.dtsi b/arch/arm/boot/dts/rk322x.dtsi index e23a22e29155..9e6bf0e311bb 100644 --- a/arch/arm/boot/dts/rk3228.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -47,8 +47,6 @@ #include "skeleton.dtsi" / { - compatible = "rockchip,rk3228"; - interrupt-parent = <&gic>; aliases { @@ -140,6 +138,47 @@ #clock-cells = <0>; }; + i2s1: i2s1@100b0000 { + compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s"; + reg = <0x100b0000 0x4000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2s_clk", "i2s_hclk"; + clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1_8CH>; + dmas = <&pdma 14>, <&pdma 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1_bus>; + status = "disabled"; + }; + + i2s0: i2s0@100c0000 { + compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s"; + reg = <0x100c0000 0x4000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2s_clk", "i2s_hclk"; + clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0_8CH>; + dmas = <&pdma 11>, <&pdma 12>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2s2: i2s2@100e0000 { + compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s"; + reg = <0x100e0000 0x4000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2s_clk", "i2s_hclk"; + clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2_2CH>; + dmas = <&pdma 0>, <&pdma 1>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + grf: syscon@11000000 { compatible = "syscon"; reg = <0x11000000 0x1000>; @@ -376,6 +415,25 @@ status = "disabled"; }; + gmac: ethernet@30200000 { + compatible = "rockchip,rk3228-gmac"; + reg = <0x30200000 0x10000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>, + <&cru SCLK_MAC_TX>, <&cru SCLK_MAC_REF>, + <&cru SCLK_MAC_REFOUT>, <&cru ACLK_GMAC>, + <&cru PCLK_GMAC>; + clock-names = "stmmaceth", "mac_clk_rx", + "mac_clk_tx", "clk_mac_ref", + "clk_mac_refout", "aclk_mac", + "pclk_mac"; + resets = <&cru SRST_GMAC>; + reset-names = "stmmaceth"; + rockchip,grf = <&grf>; + status = "disabled"; + }; + gic: interrupt-controller@32010000 { compatible = "arm,gic-400"; interrupt-controller; @@ -460,6 +518,10 @@ bias-disable; }; + pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma { + drive-strength = <12>; + }; + emmc { emmc_clk: emmc-clk { rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>; @@ -481,6 +543,44 @@ }; }; + gmac { + rgmii_pins: rgmii-pins { + rockchip,pins = <2 14 RK_FUNC_1 &pcfg_pull_none>, + <2 12 RK_FUNC_1 &pcfg_pull_none>, + <2 25 RK_FUNC_1 &pcfg_pull_none>, + <2 19 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <2 18 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <2 22 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <2 23 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <2 9 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <2 13 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <2 17 RK_FUNC_1 &pcfg_pull_none>, + <2 16 RK_FUNC_1 &pcfg_pull_none>, + <2 21 RK_FUNC_2 &pcfg_pull_none>, + <2 20 RK_FUNC_2 &pcfg_pull_none>, + <2 11 RK_FUNC_1 &pcfg_pull_none>, + <2 8 RK_FUNC_1 &pcfg_pull_none>; + }; + + rmii_pins: rmii-pins { + rockchip,pins = <2 14 RK_FUNC_1 &pcfg_pull_none>, + <2 12 RK_FUNC_1 &pcfg_pull_none>, + <2 25 RK_FUNC_1 &pcfg_pull_none>, + <2 19 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <2 18 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <2 13 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <2 17 RK_FUNC_1 &pcfg_pull_none>, + <2 16 RK_FUNC_1 &pcfg_pull_none>, + <2 8 RK_FUNC_1 &pcfg_pull_none>, + <2 15 RK_FUNC_1 &pcfg_pull_none>; + }; + + phy_pins: phy-pins { + rockchip,pins = <2 14 RK_FUNC_2 &pcfg_pull_none>, + <2 8 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>, @@ -509,6 +609,20 @@ }; }; + i2s1 { + i2s1_bus: i2s1-bus { + rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_none>, + <0 9 RK_FUNC_1 &pcfg_pull_none>, + <0 11 RK_FUNC_1 &pcfg_pull_none>, + <0 12 RK_FUNC_1 &pcfg_pull_none>, + <0 13 RK_FUNC_1 &pcfg_pull_none>, + <0 14 RK_FUNC_1 &pcfg_pull_none>, + <1 2 RK_FUNC_1 &pcfg_pull_none>, + <1 4 RK_FUNC_1 &pcfg_pull_none>, + <1 5 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + pwm0 { pwm0_pin: pwm0-pin { rockchip,pins = <3 21 RK_FUNC_1 &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index d6cf9ada13c9..114c90fb65e2 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -64,22 +64,6 @@ clock-output-names = "ext_gmac"; }; - io_domains: io-domains { - compatible = "rockchip,rk3288-io-voltage-domain"; - rockchip,grf = <&grf>; - - audio-supply = <&vcca_33>; - bb-supply = <&vcc_io>; - dvp-supply = <&dovdd_1v8>; - flash0-supply = <&vcc_flash>; - flash1-supply = <&vcc_lan>; - gpio30-supply = <&vcc_io>; - gpio1830-supply = <&vcc_io>; - lcdc-supply = <&vcc_io>; - sdcard-supply = <&vccio_sd>; - wifi-supply = <&vccio_wl>; - }; - ir: ir-receiver { compatible = "gpio-ir-receiver"; pinctrl-names = "default"; @@ -397,6 +381,21 @@ status = "okay"; }; +&io_domains { + status = "okay"; + + audio-supply = <&vcca_33>; + bb-supply = <&vcc_io>; + dvp-supply = <&dovdd_1v8>; + flash0-supply = <&vcc_flash>; + flash1-supply = <&vcc_lan>; + gpio30-supply = <&vcc_io>; + gpio1830-supply = <&vcc_io>; + lcdc-supply = <&vcc_io>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vccio_wl>; +}; + &pinctrl { pcfg_output_high: pcfg-output-high { output-high; diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts index 8643103d8cd8..24488421f0f0 100644 --- a/arch/arm/boot/dts/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rk3288-miqi.dts @@ -64,19 +64,6 @@ clock-output-names = "ext_gmac"; }; - io_domains: io-domains { - compatible = "rockchip,rk3288-io-voltage-domain"; - - audio-supply = <&vcca_33>; - flash0-supply = <&vcc_flash>; - flash1-supply = <&vcc_lan>; - gpio30-supply = <&vcc_io>; - gpio1830-supply = <&vcc_io>; - lcdc-supply = <&vcc_io>; - sdcard-supply = <&vccio_sd>; - wifi-supply = <&vcc_18>; - }; - leds { compatible = "gpio-leds"; @@ -321,6 +308,19 @@ status = "okay"; }; +&io_domains { + status = "okay"; + + audio-supply = <&vcca_33>; + flash0-supply = <&vcc_flash>; + flash1-supply = <&vcc_lan>; + gpio30-supply = <&vcc_io>; + gpio1830-supply = <&vcc_io>; + lcdc-supply = <&vcc_io>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vcc_18>; +}; + &pinctrl { pcfg_output_high: pcfg-output-high { output-high; diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index 720717bb3614..dda8d259bb6d 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -77,22 +77,6 @@ }; }; - io_domains: io-domains { - compatible = "rockchip,rk3288-io-voltage-domain"; - rockchip,grf = <&grf>; - - audio-supply = <&vcca_33>; - bb-supply = <&vcc_io>; - dvp-supply = <&vcc18_dvp>; - flash0-supply = <&vcc_flash>; - flash1-supply = <&vcc_lan>; - gpio30-supply = <&vcc_io>; - gpio1830-supply = <&vcc_io>; - lcdc-supply = <&vcc_io>; - sdcard-supply = <&vccio_sd>; - wifi-supply = <&vccio_wl>; - }; - ir: ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; @@ -437,6 +421,21 @@ status = "okay"; }; +&io_domains { + status = "okay"; + + audio-supply = <&vcca_33>; + bb-supply = <&vcc_io>; + dvp-supply = <&vcc18_dvp>; + flash0-supply = <&vcc_flash>; + flash1-supply = <&vcc_lan>; + gpio30-supply = <&vcc_io>; + gpio1830-supply = <&vcc_io>; + lcdc-supply = <&vcc_io>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vccio_wl>; +}; + &pinctrl { ak8963 { comp_int: comp-int { diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index e1ee9f949035..bb1f01e037ba 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -61,22 +61,6 @@ clock-output-names = "ext_gmac"; }; - io_domains: io-domains { - compatible = "rockchip,rk3288-io-voltage-domain"; - rockchip,grf = <&grf>; - - audio-supply = <&vcc_io>; - bb-supply = <&vcc_io>; - dvp-supply = <&vcc_18>; - flash0-supply = <&vcc_flash>; - flash1-supply = <&vccio_pmu>; - gpio30-supply = <&vccio_pmu>; - gpio1830 = <&vcc_io>; - lcdc-supply = <&vcc_io>; - sdcard-supply = <&vccio_sd>; - wifi-supply = <&vcc_18>; - }; - vcc_flash: flash-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; @@ -259,6 +243,21 @@ }; }; +&io_domains { + status = "okay"; + + audio-supply = <&vcc_io>; + bb-supply = <&vcc_io>; + dvp-supply = <&vcc_18>; + flash0-supply = <&vcc_flash>; + flash1-supply = <&vccio_pmu>; + gpio30-supply = <&vccio_pmu>; + gpio1830 = <&vcc_io>; + lcdc-supply = <&vcc_io>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vcc_18>; +}; + &pinctrl { pcfg_output_high: pcfg-output-high { output-high; diff --git a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi new file mode 100644 index 000000000000..6d105914a4f3 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi @@ -0,0 +1,101 @@ +/* + * Google Veyron (and derivatives) fragment for the max98090 audio + * codec and analog headphone jack. + * + * Copyright 2016 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + sound { + compatible = "rockchip,rockchip-audio-max98090"; + pinctrl-names = "default"; + pinctrl-0 = <&mic_det>, <&hp_det>; + rockchip,model = "VEYRON-I2S"; + rockchip,i2s-controller = <&i2s>; + rockchip,audio-codec = <&max98090>; + rockchip,hp-det-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>; + rockchip,mic-det-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + rockchip,headset-codec = <&headsetcodec>; + }; +}; + +&i2c2 { + max98090: max98090@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpio6>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + clock-names = "mclk"; + clocks = <&cru SCLK_I2S0_OUT>; + pinctrl-names = "default"; + pinctrl-0 = <&int_codec>; + }; +}; + +&i2c4 { + headsetcodec: ts3a227e@3b { + compatible = "ti,ts3a227e"; + reg = <0x3b>; + interrupt-parent = <&gpio0>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ts3a227e_int_l>; + ti,micbias = <7>; /* MICBIAS = 2.8V */ + }; +}; + +&i2s { + status = "okay"; +}; + +&io_domains { + audio-supply = <&vcc18_codec>; +}; + +&rk808 { + vcc10-supply = <&vcc33_sys>; + + regulators { + vcc18_codec: LDO_REG6 { + regulator-name = "vcc18_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; +}; + +&pinctrl { + codec { + hp_det: hp-det { + rockchip,pins = <6 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + /* + * HACK: We're going to _pull down_ this _active low_ interrupt + * so that it never fires. We don't need this interrupt because + * we've got a ts3a227e chip but the driver requires it. + */ + int_codec: int-codec { + rockchip,pins = <6 7 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + mic_det: mic-det { + rockchip,pins = <6 11 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + headset { + ts3a227e_int_l: ts3a227e-int-l { + rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index 2958c36d12a0..ce1f87980bcb 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -46,6 +46,7 @@ #include <dt-bindings/clock/rockchip,rk808.h> #include <dt-bindings/input/input.h> #include "rk3288-veyron.dtsi" +#include "rk3288-veyron-analog-audio.dtsi" #include "rk3288-veyron-sdmmc.dtsi" / { diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index b2557bf5a58f..3dd2cca48c11 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -83,19 +83,6 @@ reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; }; - io_domains: io-domains { - compatible = "rockchip,rk3288-io-voltage-domain"; - rockchip,grf = <&grf>; - - bb-supply = <&vcc33_io>; - dvp-supply = <&vcc_18>; - flash0-supply = <&vcc18_flashio>; - gpio1830-supply = <&vcc33_io>; - gpio30-supply = <&vcc33_io>; - lcdc-supply = <&vcc33_lcd>; - wifi-supply = <&vcc18_wl>; - }; - sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rk808 RK808_CLKOUT1>; @@ -355,6 +342,18 @@ i2c-scl-rising-time-ns = <1000>; }; +&io_domains { + status = "okay"; + + bb-supply = <&vcc33_io>; + dvp-supply = <&vcc_18>; + flash0-supply = <&vcc18_flashio>; + gpio1830-supply = <&vcc33_io>; + gpio30-supply = <&vcc33_io>; + lcdc-supply = <&vcc33_lcd>; + wifi-supply = <&vcc18_wl>; +}; + &pwm1 { status = "okay"; }; @@ -383,6 +382,12 @@ status = "okay"; rx-sample-delay-ns = <12>; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + }; }; &tsadc { diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 3ebee530f2b0..cd33f0170890 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -827,6 +827,11 @@ #phy-cells = <0>; status = "disabled"; }; + + io_domains: io-domains { + compatible = "rockchip,rk3288-io-voltage-domain"; + status = "disabled"; + }; }; wdt: watchdog@ff800000 { diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 5dd2734e67ba..353d0e5ec83b 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -72,6 +72,11 @@ }; }; + pmu { + compatible = "arm,cortex-a5-pmu"; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 0>; + }; + memory { reg = <0x20000000 0x20000000>; }; @@ -112,13 +117,13 @@ clock-names = "pclk", "hclk"; status = "disabled"; - ep0 { + ep@0 { reg = <0>; atmel,fifo-size = <64>; atmel,nb-banks = <1>; }; - ep1 { + ep@1 { reg = <1>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -126,7 +131,7 @@ atmel,can-isoc; }; - ep2 { + ep@2 { reg = <2>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -134,7 +139,7 @@ atmel,can-isoc; }; - ep3 { + ep@3 { reg = <3>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -142,7 +147,7 @@ atmel,can-isoc; }; - ep4 { + ep@4 { reg = <4>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -150,7 +155,7 @@ atmel,can-isoc; }; - ep5 { + ep@5 { reg = <5>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -158,7 +163,7 @@ atmel,can-isoc; }; - ep6 { + ep@6 { reg = <6>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -166,7 +171,7 @@ atmel,can-isoc; }; - ep7 { + ep@7 { reg = <7>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -174,56 +179,56 @@ atmel,can-isoc; }; - ep8 { + ep@8 { reg = <8>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep9 { + ep@9 { reg = <9>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep10 { + ep@10 { reg = <10>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep11 { + ep@11 { reg = <11>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep12 { + ep@12 { reg = <12>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep13 { + ep@13 { reg = <13>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep14 { + ep@14 { reg = <14>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep15 { + ep@15 { reg = <15>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 36301bd9a14a..4c84d333fc7e 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -326,26 +326,22 @@ atmel,adc-res-names = "lowres", "highres"; status = "disabled"; - trigger@0 { - reg = <0>; + trigger0 { trigger-name = "external-rising"; trigger-value = <0x1>; trigger-external; }; - trigger@1 { - reg = <1>; + trigger1 { trigger-name = "external-falling"; trigger-value = <0x2>; trigger-external; }; - trigger@2 { - reg = <2>; + trigger2 { trigger-name = "external-any"; trigger-value = <0x3>; trigger-external; }; - trigger@3 { - reg = <3>; + trigger3 { trigger-name = "continuous"; trigger-value = <0x6>; }; @@ -1341,13 +1337,13 @@ clock-names = "pclk", "hclk"; status = "disabled"; - ep0 { + ep@0 { reg = <0>; atmel,fifo-size = <64>; atmel,nb-banks = <1>; }; - ep1 { + ep@1 { reg = <1>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -1355,7 +1351,7 @@ atmel,can-isoc; }; - ep2 { + ep@2 { reg = <2>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -1363,84 +1359,84 @@ atmel,can-isoc; }; - ep3 { + ep@3 { reg = <3>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-dma; }; - ep4 { + ep@4 { reg = <4>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-dma; }; - ep5 { + ep@5 { reg = <5>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-dma; }; - ep6 { + ep@6 { reg = <6>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-dma; }; - ep7 { + ep@7 { reg = <7>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-dma; }; - ep8 { + ep@8 { reg = <8>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; }; - ep9 { + ep@9 { reg = <9>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; }; - ep10 { + ep@10 { reg = <10>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; }; - ep11 { + ep@11 { reg = <11>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; }; - ep12 { + ep@12 { reg = <12>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; }; - ep13 { + ep@13 { reg = <13>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; }; - ep14 { + ep@14 { reg = <14>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; }; - ep15 { + ep@15 { reg = <15>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/sama5d31ek.dts index 04eec0dfcf7d..25e4c0b2d786 100644 --- a/arch/arm/boot/dts/sama5d31ek.dts +++ b/arch/arm/boot/dts/sama5d31ek.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "sama5d31.dtsi" #include "sama5d3xmb.dtsi" +#include "sama5d3xmb_emac.dtsi" #include "sama5d3xdm.dtsi" / { diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/sama5d33ek.dts index cbd6a3ff1545..c517b87a1de2 100644 --- a/arch/arm/boot/dts/sama5d33ek.dts +++ b/arch/arm/boot/dts/sama5d33ek.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "sama5d33.dtsi" #include "sama5d3xmb.dtsi" +#include "sama5d3xmb_gmac.dtsi" #include "sama5d3xdm.dtsi" / { diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts index 878aa164275a..c8b8449fdc3e 100644 --- a/arch/arm/boot/dts/sama5d34ek.dts +++ b/arch/arm/boot/dts/sama5d34ek.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "sama5d34.dtsi" #include "sama5d3xmb.dtsi" +#include "sama5d3xmb_gmac.dtsi" #include "sama5d3xdm.dtsi" / { diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts index e812f5c1bf70..6e261fcf576c 100644 --- a/arch/arm/boot/dts/sama5d35ek.dts +++ b/arch/arm/boot/dts/sama5d35ek.dts @@ -9,6 +9,8 @@ /dts-v1/; #include "sama5d35.dtsi" #include "sama5d3xmb.dtsi" +#include "sama5d3xmb_emac.dtsi" +#include "sama5d3xmb_gmac.dtsi" / { model = "Atmel SAMA5D35-EK"; diff --git a/arch/arm/boot/dts/sama5d36ek.dts b/arch/arm/boot/dts/sama5d36ek.dts index 59576c6f9826..cd458b85a205 100644 --- a/arch/arm/boot/dts/sama5d36ek.dts +++ b/arch/arm/boot/dts/sama5d36ek.dts @@ -10,6 +10,8 @@ #include "sama5d36.dtsi" #include "sama5d3xmb.dtsi" #include "sama5d3xdm.dtsi" +#include "sama5d3xmb_emac.dtsi" +#include "sama5d3xmb_gmac.dtsi" / { model = "Atmel SAMA5D36-EK"; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index 2cf9c3611db6..b5e111b29da1 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -34,40 +34,6 @@ spi0: spi@f0004000 { cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; }; - - macb0: ethernet@f0028000 { - phy-mode = "rgmii"; - #address-cells = <1>; - #size-cells = <0>; - - ethernet-phy@1 { - reg = <0x1>; - interrupt-parent = <&pioB>; - interrupts = <25 IRQ_TYPE_EDGE_FALLING>; - txen-skew-ps = <800>; - txc-skew-ps = <3000>; - rxdv-skew-ps = <400>; - rxc-skew-ps = <3000>; - rxd0-skew-ps = <400>; - rxd1-skew-ps = <400>; - rxd2-skew-ps = <400>; - rxd3-skew-ps = <400>; - }; - - ethernet-phy@7 { - reg = <0x7>; - interrupt-parent = <&pioB>; - interrupts = <25 IRQ_TYPE_EDGE_FALLING>; - txen-skew-ps = <800>; - txc-skew-ps = <3000>; - rxdv-skew-ps = <400>; - rxc-skew-ps = <3000>; - rxd0-skew-ps = <400>; - rxd1-skew-ps = <400>; - rxd2-skew-ps = <400>; - rxd3-skew-ps = <400>; - }; - }; }; nand0: nand@60000000 { diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index 89010422812d..6d252ad050f6 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -117,18 +117,6 @@ status = "okay"; }; - macb1: ethernet@f802c000 { - phy-mode = "rmii"; - - #address-cells = <1>; - #size-cells = <0>; - phy0: ethernet-phy@1 { - interrupt-parent = <&pioE>; - interrupts = <30 IRQ_TYPE_EDGE_FALLING>; - reg = <1>; - }; - }; - pinctrl@fffff200 { board { pinctrl_mmc0_cd: mmc0_cd { diff --git a/arch/arm/boot/dts/sama5d3xmb_emac.dtsi b/arch/arm/boot/dts/sama5d3xmb_emac.dtsi new file mode 100644 index 000000000000..2fd14f371a04 --- /dev/null +++ b/arch/arm/boot/dts/sama5d3xmb_emac.dtsi @@ -0,0 +1,26 @@ +/* + * sama5d3xmb_emac.dts - Device Tree Include file for SAMA5D3x mother board + * Ethernet + * + * Copyright (C) 2016 Atmel, + * + * Licensed under GPLv2 or later. + */ + +/ { + ahb { + apb { + macb1: ethernet@f802c000 { + phy-mode = "rmii"; + + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@1 { + interrupt-parent = <&pioE>; + interrupts = <30 IRQ_TYPE_EDGE_FALLING>; + reg = <1>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi b/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi new file mode 100644 index 000000000000..65aea7a75b1d --- /dev/null +++ b/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi @@ -0,0 +1,48 @@ +/* + * sama5d3xmb_gmac.dtsi - Device Tree Include file for SAMA5D3x motherboard + * Gigabit Ethernet + * + * Copyright (C) 2016 Atmel, + * + * Licensed under GPLv2 or later. + */ + +/ { + ahb { + apb { + macb0: ethernet@f0028000 { + phy-mode = "rgmii"; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; + + ethernet-phy@7 { + reg = <0x7>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 4e2cc30d6615..65e725fb5679 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -135,13 +135,13 @@ clock-names = "pclk", "hclk"; status = "disabled"; - ep0 { + ep@0 { reg = <0>; atmel,fifo-size = <64>; atmel,nb-banks = <1>; }; - ep1 { + ep@1 { reg = <1>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -149,7 +149,7 @@ atmel,can-isoc; }; - ep2 { + ep@2 { reg = <2>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -157,7 +157,7 @@ atmel,can-isoc; }; - ep3 { + ep@3 { reg = <3>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -165,7 +165,7 @@ atmel,can-isoc; }; - ep4 { + ep@4 { reg = <4>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -173,7 +173,7 @@ atmel,can-isoc; }; - ep5 { + ep@5 { reg = <5>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -181,7 +181,7 @@ atmel,can-isoc; }; - ep6 { + ep@6 { reg = <6>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -189,7 +189,7 @@ atmel,can-isoc; }; - ep7 { + ep@7 { reg = <7>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -197,56 +197,56 @@ atmel,can-isoc; }; - ep8 { + ep@8 { reg = <8>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep9 { + ep@9 { reg = <9>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep10 { + ep@10 { reg = <10>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep11 { + ep@11 { reg = <11>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep12 { + ep@12 { reg = <12>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep13 { + ep@13 { reg = <13>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep14 { + ep@14 { reg = <14>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep15 { + ep@15 { reg = <15>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -1226,22 +1226,22 @@ atmel,adc-ts-pressure-threshold = <10000>; status = "disabled"; - trigger@0 { + trigger0 { trigger-name = "external-rising"; trigger-value = <0x1>; trigger-external; }; - trigger@1 { + trigger1 { trigger-name = "external-falling"; trigger-value = <0x2>; trigger-external; }; - trigger@2 { + trigger2 { trigger-name = "external-any"; trigger-value = <0x3>; trigger-external; }; - trigger@3 { + trigger3 { trigger-name = "continuous"; trigger-value = <0x6>; }; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index c2d8a080e392..3d65f1f6d78b 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -22,7 +22,7 @@ compatible = "renesas,kzm9g", "renesas,sh73a0"; aliases { - serial4 = &scifa4; + serial0 = &scifa4; }; cpus { @@ -39,16 +39,16 @@ }; chosen { - bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw"; - stdout-path = &scifa4; + bootargs = "root=/dev/nfs ip=dhcp ignore_loglevel rw"; + stdout-path = "serial0:115200n8"; }; - memory { + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x20000000>; }; - reg_1p8v: regulator@0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -57,7 +57,7 @@ regulator-boot-on; }; - reg_3p3v: regulator@1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -66,7 +66,7 @@ regulator-boot-on; }; - vmmc_sdhi0: regulator@2 { + vmmc_sdhi0: regulator-vmmc-sdhi0 { compatible = "regulator-fixed"; regulator-name = "SDHI0 Vcc"; regulator-min-microvolt = <3300000>; @@ -75,7 +75,7 @@ enable-active-high; }; - vmmc_sdhi2: regulator@3 { + vmmc_sdhi2: regulator-vmmc-sdhi2 { compatible = "regulator-fixed"; regulator-name = "SDHI2 Vcc"; regulator-min-microvolt = <3300000>; @@ -352,7 +352,7 @@ }; }; - scifa4_pins: serial4 { + scifa4_pins: scifa4 { groups = "scifa4_data", "scifa4_ctrl"; function = "scifa4"; }; @@ -378,6 +378,7 @@ pinctrl-0 = <&scifa4_pins>; pinctrl-names = "default"; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index c4f434cdec60..032fe2f14b16 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -55,7 +55,7 @@ <0xf0000100 0x100>; }; - L2: cache-controller { + L2: cache-controller@f0100000 { compatible = "arm,pl310-cache"; reg = <0xf0100000 0x1000>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 5820b70c95b3..94000cbe576b 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -22,11 +22,6 @@ #address-cells = <1>; #size-cells = <1>; - aliases { - serial0 = &uart0; - serial1 = &uart1; - }; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -572,12 +567,6 @@ reg = <0xffcfb100 0x80>; }; - sdramedac { - compatible = "altr,sdram-edac-a10"; - altr,sdr-syscon = <&sdr>; - interrupts = <0 2 4>, <0 0 4>; - }; - L2: l2-cache@fffff000 { compatible = "arm,pl310-cache"; reg = <0xfffff000 0x1000>; @@ -610,16 +599,29 @@ #size-cells = <1>; interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>, <0 0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; ranges; + sdramedac { + compatible = "altr,sdram-edac-a10"; + altr,sdr-syscon = <&sdr>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>, + <49 IRQ_TYPE_LEVEL_HIGH>; + }; + l2-ecc@ffd06010 { compatible = "altr,socfpga-a10-l2-ecc"; reg = <0xffd06010 0x4>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, + <32 IRQ_TYPE_LEVEL_HIGH>; }; ocram-ecc@ff8c3000 { compatible = "altr,socfpga-a10-ocram-ecc"; reg = <0xff8c3000 0x400>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>, + <33 IRQ_TYPE_LEVEL_HIGH>; }; emac0-rx-ecc@ff8c0800 { diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi index 567df98f1bb5..8e3a4adc389f 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi @@ -20,9 +20,14 @@ model = "Altera SOCFPGA Arria 10"; compatible = "altr,socfpga-arria10", "altr,socfpga"; + aliases { + ethernet0 = &gmac0; + serial0 = &uart1; + }; + chosen { bootargs = "earlyprintk"; - stdout-path = "serial1:115200n8"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 6ae56838bd3a..d309314f3a36 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -604,6 +604,7 @@ #interrupt-cells = <2>; ab8500_gpio: ab8500-gpio { + compatible = "stericsson,ab8500-gpio"; gpio-controller; #gpio-cells = <2>; }; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi index fc5e8ce700c3..3c9f2f068c2f 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi @@ -99,46 +99,69 @@ vddio-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default"; pinctrl-0 = <&accel_tvk_mode>; - interrupt-parent = <&gpio2>; - interrupts = <18 IRQ_TYPE_EDGE_FALLING>, - <19 IRQ_TYPE_EDGE_FALLING>; - }; - lsm303dlh@1e { /* - * This magnetometer is packaged with - * the accelerometer, and has a DRDY line, - * however it is not connected on this - * board so it can not generate interrupts. + * These interrupts cannot be used: the other component + * ST-Micro L3D4200D gyro that is connected to the same lines + * cannot set its DRDY line to open drain, so it cannot be + * shared with other peripherals. The should be defined for + * the falling edge if they could be wired together. + * + * interrupts-extended = + * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>, + * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>; */ + }; + lsm303dlh@1e { + /* Magnetometer */ compatible = "st,lsm303dlh-magn"; reg = <0x1e>; vdd-supply = <&ab8500_ldo_aux1_reg>; vddio-supply = <&db8500_vsmps2_reg>; + /* + * These interrupts cannot be used: the other component + * ST-Micro L3D4200D gyro that is connected to the same lines + * cannot set its DRDY line to open drain, so it cannot be + * shared with other peripherals. The should be defined for + * the falling edge if they could be wired together. + * + * interrupts-extended = + * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>, + * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>; + */ }; lis331dl@1c { /* Accelerometer */ compatible = "st,lis331dl-accel"; st,drdy-int-pin = <1>; - drive-open-drain; reg = <0x1c>; vdd-supply = <&ab8500_ldo_aux1_reg>; vddio-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default"; pinctrl-0 = <&accel_tvk_mode>; interrupt-parent = <&gpio2>; - interrupts = <18 IRQ_TYPE_EDGE_FALLING>, - <19 IRQ_TYPE_EDGE_FALLING>; + /* INT2 would need to be open drain */ + interrupts = <18 IRQ_TYPE_EDGE_RISING>, + <19 IRQ_TYPE_EDGE_RISING>; }; ak8974@0f { /* Magnetometer */ compatible = "asahi-kasei,ak8974"; reg = <0x0f>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - vddio-supply = <&db8500_vsmps2_reg>; + avdd-supply = <&ab8500_ldo_aux1_reg>; + dvdd-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default"; pinctrl-0 = <&gyro_magn_tvk_mode>; - interrupt-parent = <&gpio1>; - interrupts = <0 IRQ_TYPE_EDGE_RISING>; + /* + * These interrupts cannot be used: the other component + * ST-Micro L3D4200D gyro that is connected to the same lines + * cannot set its DRDY line to open drain, so it cannot be + * shared with other peripherals. The should be defined for + * the falling edge if they could be wired together. + * + * interrupts-extended = + * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>, + * <&gpio0 31 IRQ_TYPE_EDGE_FALLING>; + */ }; l3g4200d@68 { /* Gyroscope */ @@ -149,8 +172,9 @@ vddio-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default"; pinctrl-0 = <&gyro_magn_tvk_mode>; - interrupt-parent = <&gpio1>; - interrupts = <0 IRQ_TYPE_EDGE_RISING>; + interrupts-extended = + <&gpio1 0 IRQ_TYPE_EDGE_RISING>, + <&gpio0 31 IRQ_TYPE_EDGE_RISING>; }; lsp001wm@5c { /* Barometer/pressure sensor */ @@ -218,7 +242,7 @@ /* Accelerometer interrupt lines 1 & 2 */ tvk_cfg { pins = "GPIO82_C1", "GPIO83_D3"; - ste,config = <&gpio_in_pu>; + ste,config = <&gpio_in_pd>; }; }; }; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 6d8ce154347e..48dc38482633 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -223,7 +223,6 @@ prcmu@80157000 { ab8500 { ab8500-gpio { - compatible = "stericsson,ab8500-gpio"; }; ab8500-regulators { diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index 45d7af326718..7187676836be 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -18,6 +18,126 @@ compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; soc { + /* Name the GPIO muxed rails on the HREF boards */ + gpio@8012e000 { + /* GPIOs 0 - 31 */ + gpio-line-names = + /* GPIO0,1 used for UART0 BT RX/TX */ + "", "", + "UART_WAKE", + "BT_WAKE", + "", + "SDMMC_1V8_3V_SEL", + "FLASH_LED_SYNC (FLASH_CTRL_0)", + "XENON_READY (FLASH_CTRL_1)", + "", "", "", "", "", "", "", "", + "", "", "", "", + "", + "FLASH_LED_EN (FLASH_CTRL_3)", + "", "", + "", "", "", "", "", + /* Used by UART2 (console) */ + "", "", + "MAGNETOMETER_INT"; + }; + + gpio@8012e080 { + /* GPIOs 32 - 63 */ + gpio-line-names = + "MAGNETOMETER_DRDY", + "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; + }; + + gpio@8000e000 { + /* GPIOs 64 - 95 */ + gpio-line-names = "XENON_EN2 (FLASH_CTRL_4)", + "DISP1_RST", + "DISP2_RST", + "TOUCH_INT2", + "LCD_VSI0_A", + "LCD_VSI1_A", + /* GPIO 70-77 used for ETM */ + "", "", "", "", "", "", "", "", + /* GPIO 78-81 used for YCBCR */ + "", "", "", "", + "ACCELEROMETER_INT1_RDY", + "ACCELEROMETER_INT2", + "TOUCH_INT", + "WLAN_ENA", + "", "", "", "", "", + "FORCE_SENSING_INT", + "FORCE_SENSING_RESET", + "", "", + "SDMMC_CD"; + }; + + gpio@8000e080 { + /* GPIOs 96 - 127 */ + gpio-line-names = "", + "FORCE_SENSING_WU", + "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; + }; + + gpio@8000e100 { + /* GPIOs 128 - 159 */ + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", + "DIPRO_INT", /* GPIO139 */ + "XSHUTDOWN_SECONDARY_SENSOR", + "XSHUTDOWN_PRIMARY_SENSOR", + "NFC_RST (NFC_CTRL_", + "TOUCH_RST", + "NFC_IRQ (NFC_CTRL_1)", + "HAL_SW", + "TOUCH_RST2", + "", "", + "VAUDIO_HF_EN", /* GPIO149 */ + "", "", "", "", "", "", "", "", "", ""; + }; + + gpio@8000e180 { + /* GPIOs 160 - 191 */ + gpio-line-names = "", "", "", "", "", "", "", "", + "", + "SDMMC_EN", + "XENON_CHARGE (FLASH_CONTROL_5)", + "GBF_ENA_RESET", + "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; + }; + + gpio@8011e000 { + /* GPIOs 192 - 223 */ + gpio-line-names = "HDTV_INTN", + "", "", "", + "HDTV_RSTN", + "", "", "", + "", /* GPIO200 */ + "", "", "", "", "", "", "", + /* GPIO208-216 used for WGBF_MC1 */ + "", "", "", "", "", "", "", "", "", + "SW_FRONT_PROXIMITY", /* GPIO217 */ + "KPD_CTRL_INT", /* Keypad controller */ + "", "", "", "", ""; + }; + + gpio@8011e080 { + /* GPIOs 224 - 255 */ + gpio-line-names = "", "", + "HSIT_ACWAKE0", + "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; + }; + // External Micro SD slot sdi0_per1@80126000 { cd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95 diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 36e84efc401c..b3df1c60d465 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -95,6 +95,70 @@ }; soc { + /* Name the GPIO muxed rails on the Snowball board */ + gpio@8012e000 { + /* GPIOs 0 - 31 */ + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", + "AP_GPIO31"; + }; + + gpio@8012e080 { + /* GPIOs 32 - 63 */ + gpio-line-names = "USR PB", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; + }; + + gpio@8000e000 { + /* GPIOs 64 - 95 */ + gpio-line-names = "", "", "", "", "AP_GPIO68", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; + }; + + gpio@8000e100 { + /* GPIOs 128 - 159 */ + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "", "IRQ_LAN", "RSTn_LAN", + "USR_LED", "", "", "", "", "", "", + "", "", "AP_GPIO151", "AP_GPIO152", + "", "", "", "", "", "", ""; + }; + + gpio@8000e180 { + /* GPIOs 160 - 191 */ + gpio-line-names = "", "AP_GPIO161", "AP_GPIO162", + "ACCELEROMETER_INT1_RDY", + "ACCELEROMETER_INT2", "MAG_DRDY", + "GYRO_DRDY", "RSTn_MLC", "RSTn_SLC", + "GYRO_INT", "UART_WAKE", "GBF_RESET", + "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; + }; + + gpio@8011e000 { + /* GPIOs 192 - 223 */ + gpio-line-names = "HDTV_INTn", "", "", "", "HDTV_RST", + "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", + "WLAN_RESETN", "WLAN_IRQ", "MMC_EN", + "MMC_CD", "", "", "", "", ""; + }; + + gpio@8011e080 { + /* GPIOs 224 - 255 */ + gpio-line-names = "", "", "", "", "SD_SEL", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; + }; + usb_per5@a03e0000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&musb_default_mode>; @@ -352,7 +416,25 @@ ab8500 { ab8500-gpio { - compatible = "stericsson,ab8500-gpio"; + /* + * AB8500 GPIOs are numbered starting from 1, so the first + * index 0 is what in the datasheet is called "GPIO1", and + * the second is "GPIO2" and so forth. Confusingly, the + * Snowball schematic then names the "GPIO2" line "PM_GPIO1". + * while later naming "GPIO4" as "PM_GPIO4". + */ + gpio-line-names = "", /* AB8500 GPIO1 */ + "PM_GPIO1", /* AB8500 GPIO2 */ + "WLAN_CLK_REQ", /* AB8500 GPIO3 */ + "PM_GPIO4", /* AB8500 GPIO4 */ + "", "", "", "", "", "", "", "", "", "", "", + "EN_3V6", /* AB8500 GPIO16 */ + "", "", "", "" ,"", "", "", "", "", + "EN_3V3", /* AB8500 GPIO26 */ + "", "", "", "", "", "", "", "", "", "", "", "", "", + "PM_GPIO40", /* AB8500 GPIO40 */ + "PM_GPIO41", /* AB8500 GPIO41 */ + "PM_GPIO42"; /* AB8500 GPIO42 */ }; ext_regulators: ab8500-ext-regulators { diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi index d1f2acafc9b6..fd5049682181 100644 --- a/arch/arm/boot/dts/stih410-clock.dtsi +++ b/arch/arm/boot/dts/stih410-clock.dtsi @@ -103,6 +103,7 @@ clocks = <&clk_sysin>; clock-output-names = "clk-s-a0-pll-ofd-0"; + clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */ }; clk_s_a0_flexgen: clk-s-a0-flexgen { @@ -115,6 +116,7 @@ clock-output-names = "clk-ic-lmi0", "clk-ic-lmi1"; + clock-critical = <CLK_IC_LMI0>; }; }; @@ -129,6 +131,7 @@ "clk-s-c0-fs0-ch1", "clk-s-c0-fs0-ch2", "clk-s-c0-fs0-ch3"; + clock-critical = <0>; /* clk-s-c0-fs0-ch0 */ }; clk_s_c0: clockgen-c@09103000 { @@ -142,6 +145,7 @@ clocks = <&clk_sysin>; clock-output-names = "clk-s-c0-pll0-odf-0"; + clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */ }; clk_s_c0_pll1: clk-s-c0-pll1 { @@ -204,6 +208,11 @@ "clk-clust-hades", "clk-hwpe-hades", "clk-fc-hades"; + clock-critical = <CLK_ICN_CPU>, + <CLK_TX_ICN_DMU>, + <CLK_EXT2F_A9>, + <CLK_ICN_LMI>, + <CLK_ICN_SBC>; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index c92a1ae33a1e..39e368ec3428 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -72,8 +72,9 @@ }; blue { - label = "a1000:blue:usr"; + label = "a1000:blue:pwr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; }; @@ -84,6 +85,7 @@ regulator-name = "emac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + startup-delay-us = <20000>; enable-active-high; gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index 2b17c5199151..6de83a6187d0 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -66,6 +66,7 @@ regulator-name = "emac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + startup-delay-us = <20000>; enable-active-high; gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts index 7afc7a64eef1..e28f080b1fd5 100644 --- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts +++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts @@ -80,6 +80,7 @@ regulator-name = "emac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + startup-delay-us = <20000>; enable-active-high; gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */ }; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index ca58eb279d55..7e7dfc2b43db 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -65,9 +65,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, - <&ahb_gates 43>, <&ahb_gates 44>, - <&dram_gates 26>; + clocks = <&ahb_gates 36>, <&ahb_gates 43>, + <&ahb_gates 44>, <&de_be0_clk>, + <&tcon0_ch1_clk>, <&dram_gates 26>; status = "disabled"; }; @@ -75,9 +75,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi"; - clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, - <&ahb_gates 43>, <&ahb_gates 44>, - <&ahb_gates 46>, + clocks = <&ahb_gates 36>, <&ahb_gates 43>, + <&ahb_gates 44>, <&ahb_gates 46>, + <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch1_clk>, <&dram_gates 25>, <&dram_gates 26>; status = "disabled"; }; @@ -86,8 +86,8 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0"; - clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, - <&ahb_gates 44>, <&ahb_gates 46>, + clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&ahb_gates 46>, + <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch0_clk>, <&dram_gates 25>, <&dram_gates 26>; status = "disabled"; }; @@ -96,10 +96,11 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0"; - clocks = <&pll3>, <&pll5 1>, <&ahb_gates 34>, - <&ahb_gates 36>, <&ahb_gates 44>, - <&ahb_gates 46>, - <&dram_gates 5>, <&dram_gates 25>, <&dram_gates 26>; + clocks = <&ahb_gates 34>, <&ahb_gates 36>, + <&ahb_gates 44>, <&ahb_gates 46>, + <&de_be0_clk>, <&de_fe0_clk>, + <&tcon0_ch1_clk>, <&dram_gates 5>, + <&dram_gates 25>, <&dram_gates 26>; status = "disabled"; }; }; @@ -577,6 +578,81 @@ "dram_de_mp", "dram_ace"; }; + de_be0_clk: clk@01c20104 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20104 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-be0"; + }; + + de_be1_clk: clk@01c20108 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20108 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-be1"; + }; + + de_fe0_clk: clk@01c2010c { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c2010c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-fe0"; + }; + + de_fe1_clk: clk@01c20110 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20110 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-fe1"; + }; + + + tcon0_ch0_clk: clk@01c20118 { + #clock-cells = <0>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; + reg = <0x01c20118 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon0-ch0-sclk"; + + }; + + tcon1_ch0_clk: clk@01c2011c { + #clock-cells = <0>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; + reg = <0x01c2011c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon1-ch0-sclk"; + + }; + + tcon0_ch1_clk: clk@01c2012c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; + reg = <0x01c2012c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon0-ch1-sclk"; + + }; + + tcon1_ch1_clk: clk@01c20130 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; + reg = <0x01c20130 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon1-ch1-sclk"; + + }; + ve_clk: clk@01c2013c { #clock-cells = <0>; #reset-cells = <0>; @@ -645,6 +721,19 @@ #dma-cells = <2>; }; + nfc: nand@01c03000 { + compatible = "allwinner,sun4i-a10-nand"; + reg = <0x01c03000 0x1000>; + interrupts = <37>; + clocks = <&ahb_gates 13>, <&nand_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma SUN4I_DMA_DEDICATED 3>; + dma-names = "rxtx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; @@ -884,69 +973,62 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - pwm0_pins_a: pwm0@0 { - allwinner,pins = "PB2"; - allwinner,function = "pwm"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - pwm1_pins_a: pwm1@0 { - allwinner,pins = "PI3"; - allwinner,function = "pwm"; + emac_pins_a: emac0@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + allwinner,function = "emac"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart0_pins_a: uart0@0 { - allwinner,pins = "PB22", "PB23"; - allwinner,function = "uart0"; + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "i2c0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart0_pins_b: uart0@1 { - allwinner,pins = "PF2", "PF4"; - allwinner,function = "uart0"; + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PB18", "PB19"; + allwinner,function = "i2c1"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart1_pins_a: uart1@0 { - allwinner,pins = "PA10", "PA11"; - allwinner,function = "uart1"; + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PB20", "PB21"; + allwinner,function = "i2c2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; + ir0_rx_pins_a: ir0@0 { + allwinner,pins = "PB4"; + allwinner,function = "ir0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB18", "PB19"; - allwinner,function = "i2c1"; + ir0_tx_pins_a: ir0@1 { + allwinner,pins = "PB3"; + allwinner,function = "ir0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB20", "PB21"; - allwinner,function = "i2c2"; + ir1_rx_pins_a: ir1@0 { + allwinner,pins = "PB23"; + allwinner,function = "ir1"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - emac_pins_a: emac0@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "emac"; + ir1_tx_pins_a: ir1@1 { + allwinner,pins = "PB22"; + allwinner,function = "ir1"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; @@ -966,34 +1048,41 @@ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; - ir0_rx_pins_a: ir0@0 { - allwinner,pins = "PB4"; - allwinner,function = "ir0"; + ps20_pins_a: ps20@0 { + allwinner,pins = "PI20", "PI21"; + allwinner,function = "ps2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir0_tx_pins_a: ir0@1 { - allwinner,pins = "PB3"; - allwinner,function = "ir0"; + ps21_pins_a: ps21@0 { + allwinner,pins = "PH12", "PH13"; + allwinner,function = "ps2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir1_rx_pins_a: ir1@0 { - allwinner,pins = "PB23"; - allwinner,function = "ir1"; + pwm0_pins_a: pwm0@0 { + allwinner,pins = "PB2"; + allwinner,function = "pwm"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir1_tx_pins_a: ir1@1 { - allwinner,pins = "PB22"; - allwinner,function = "ir1"; + pwm1_pins_a: pwm1@0 { + allwinner,pins = "PI3"; + allwinner,function = "pwm"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + spdif_tx_pins_a: spdif@0 { + allwinner,pins = "PB13"; + allwinner,function = "spdif"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + spi0_pins_a: spi0@0 { allwinner,pins = "PI11", "PI12", "PI13"; allwinner,function = "spi0"; @@ -1050,25 +1139,25 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ps20_pins_a: ps20@0 { - allwinner,pins = "PI20", "PI21"; - allwinner,function = "ps2"; + uart0_pins_a: uart0@0 { + allwinner,pins = "PB22", "PB23"; + allwinner,function = "uart0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ps21_pins_a: ps21@0 { - allwinner,pins = "PH12", "PH13"; - allwinner,function = "ps2"; + uart0_pins_b: uart0@1 { + allwinner,pins = "PF2", "PF4"; + allwinner,function = "uart0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - spdif_tx_pins_a: spdif@0 { - allwinner,pins = "PB13"; - allwinner,function = "spdif"; + uart1_pins_a: uart1@0 { + allwinner,pins = "PA10", "PA11"; + allwinner,function = "uart1"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts index a790ec8adb75..2150e15e115a 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts @@ -124,7 +124,18 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PG12"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + mmc0_cd_pin_t004: mmc0_cd_pin@0 { allwinner,pins = "PG1"; allwinner,function = "gpio_in"; @@ -158,11 +169,19 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usb1_vbus_pin_a { allwinner,pins = "PG13"; }; &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/sun5i-a10s-mk802.dts index 46ff9407826d..c84ac005342e 100644 --- a/arch/arm/boot/dts/sun5i-a10s-mk802.dts +++ b/arch/arm/boot/dts/sun5i-a10s-mk802.dts @@ -73,6 +73,20 @@ status = "okay"; }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp152: pmic@30 { + compatible = "x-powers,axp152"; + reg = <0x30>; + interrupts = <0>; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>; @@ -83,10 +97,23 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + &ohci0 { status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { led_pins_mk802: led_pins@0 { allwinner,pins = "PB2"; @@ -122,6 +149,11 @@ status = "okay"; }; +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + &usbphy { usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 86d046a502e6..aef91476f9ae 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -248,6 +248,13 @@ status = "okay"; }; +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>, + <&spi2_cs0_pins_a>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts index 9fea918f949e..b5de75f4c710 100644 --- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts +++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts @@ -79,6 +79,7 @@ regulator-name = "emac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + startup-delay-us = <20000>; enable-active-high; gpio = <&pio 0 2 GPIO_ACTIVE_HIGH>; }; @@ -195,7 +196,14 @@ regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; + regulator-name = "vcc-wifi1"; +}; + +®_ldo4 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi2"; }; ®_usb1_vbus { diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 367f33012493..c41a2ba34dde 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -242,6 +242,20 @@ allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + spi2_pins_a: spi2@0 { + allwinner,pins = "PB12", "PB13", "PB14"; + allwinner,function = "spi2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi2_cs0_pins_a: spi2_cs0@0 { + allwinner,pins = "PB11"; + allwinner,function = "spi2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; &sram_a { diff --git a/arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts b/arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts index 6546fa02901d..894c4c4f9a1f 100644 --- a/arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts +++ b/arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts @@ -42,185 +42,9 @@ /dts-v1/; #include "sun5i-a13.dtsi" -#include "sunxi-common-regulators.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> -#include <dt-bindings/pwm/pwm.h> +#include "sun5i-reference-design-tablet.dtsi" / { model = "Difrnce DIT4350"; compatible = "difrnce,dit4350", "allwinner,sun5i-a13"; - - aliases { - serial0 = &uart1; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - /* TODO: backlight uses axp gpio1 as enable pin */ - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&ehci0 { - status = "okay"; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -#include "axp209.dtsi" - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - - pcf8563: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; -}; - -&lradc { - vref-supply = <®_ldo2>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&pio { - mmc0_cd_pin_d709: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; - status = "okay"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd-int-pll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_ldo3 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; -}; - -®_usb0_vbus { - gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usb0_vbus_pin_a { - allwinner,pins = "PG12"; -}; - -&usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_ldo3>; - status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts index 72e93acb5a9e..a89f29fa3e40 100644 --- a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts +++ b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts @@ -42,19 +42,45 @@ /dts-v1/; #include "sun5i-a13.dtsi" -#include "sun5i-q8-common.dtsi" +#include "sun5i-reference-design-tablet.dtsi" / { model = "Q8 A13 Tablet"; compatible = "allwinner,q8-a13", "allwinner,sun5i-a13"; + + panel: panel { + compatible = "urt,umsh-8596md-t", "simple-panel"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + /* TODO: lcd panel uses axp gpio0 as enable pin */ + backlight = <&backlight>; + #address-cells = <1>; + #size-cells = <0>; + + panel_input: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_lcd>; + }; + }; + }; +}; + +&be0 { + status = "okay"; }; -®_ldo3 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rgb666_pins>; + status = "okay"; }; -&usbphy { - usb1_vbus-supply = <®_ldo3>; +&tcon0_out { + tcon0_out_lcd: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; }; diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts index fa9ddfdcfe96..a8b0bcc04514 100644 --- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts +++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts @@ -42,24 +42,20 @@ /dts-v1/; #include "sun5i-a13.dtsi" -#include "sunxi-common-regulators.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> +#include "sun5i-reference-design-tablet.dtsi" #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> -#include <dt-bindings/pwm/pwm.h> / { model = "Utoo P66"; compatible = "utoo,p66", "allwinner,sun5i-a13"; - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - /* Note levels of 10 / 20% result in backlight off */ - brightness-levels = <0 30 40 50 60 70 80 90 100>; - default-brightness-level = <6>; - /* TODO: backlight uses axp gpio1 as enable pin */ + /* The P66 uses the uart pins as gpios */ + aliases { + /delete-property/serial0; + }; + + chosen { + /delete-property/stdout-path; }; i2c_lcd: i2c@0 { @@ -73,39 +69,21 @@ }; }; -&codec { - pinctrl-names = "default"; - pinctrl-0 = <&codec_pa_pin>; - allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */ - status = "okay"; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; +&backlight { + /* Note levels of 10 / 20% result in backlight off */ + brightness-levels = <0 30 40 50 60 70 80 90 100>; + default-brightness-level = <6>; }; -&ehci0 { - status = "okay"; +&codec { + allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */ }; -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; +&codec_pa_pin { + allwinner,pins = "PG3"; }; -#include "axp209.dtsi" - &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - icn8318: touchscreen@40 { compatible = "chipone,icn8318"; reg = <0x40>; @@ -119,40 +97,6 @@ touchscreen-inverted-x; touchscreen-swapped-x-y; }; - - pcf8563: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; -}; - -&lradc { - vref-supply = <®_ldo2>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_p66>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; - status = "okay"; }; &mmc2 { @@ -170,39 +114,7 @@ }; }; -&otg_sram { - status = "okay"; -}; - &pio { - codec_pa_pin: codec_pa_pin@0 { - allwinner,pins = "PG3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_cd_pin_p66: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - i2c_lcd_pins: i2c_lcd_pin@0 { allwinner,pins = "PG10", "PG12"; allwinner,function = "gpio_out"; @@ -217,67 +129,17 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - usb0_vbus_pin_a: usb0_vbus_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; - status = "okay"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-int-pll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_ldo3 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; }; ®_usb0_vbus { gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - status = "okay"; }; -&usb_otg { - dr_mode = "otg"; - status = "okay"; +&uart1 { + /* The P66 uses the uart pins as gpios */ + status = "disabled"; }; -&usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_ldo3>; - status = "okay"; +&usb0_vbus_pin_a { + allwinner,pins = "PB4"; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 263d46dbc7e6..e012890e0cf2 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -207,7 +207,50 @@ }; }; + display-engine { + compatible = "allwinner,sun5i-a13-display-engine"; + allwinner,pipelines = <&fe0>; + }; + soc@01c00000 { + tcon0: lcd-controller@01c0c000 { + compatible = "allwinner,sun5i-a13-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = <44>; + resets = <&tcon_ch0_clk 1>; + reset-names = "lcd"; + clocks = <&ahb_gates 36>, + <&tcon_ch0_clk>, + <&tcon_ch1_clk>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon-pixel-clock"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + pwm: pwm@01c20e00 { compatible = "allwinner,sun5i-a13-pwm"; reg = <0x01c20e00 0xc>; @@ -215,6 +258,75 @@ #pwm-cells = <3>; status = "disabled"; }; + + fe0: display-frontend@01e00000 { + compatible = "allwinner,sun5i-a13-display-frontend"; + reg = <0x01e00000 0x20000>; + interrupts = <47>; + clocks = <&ahb_gates 46>, <&de_fe_clk>, + <&dram_gates 25>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_fe_clk>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe0>; + }; + }; + }; + }; + + be0: display-backend@01e60000 { + compatible = "allwinner,sun5i-a13-display-backend"; + reg = <0x01e60000 0x10000>; + clocks = <&ahb_gates 44>, <&de_be_clk>, + <&dram_gates 26>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_be_clk>; + status = "disabled"; + + assigned-clocks = <&de_be_clk>; + assigned-clock-rates = <300000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be0_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be0>; + }; + }; + + be0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_be0>; + }; + }; + }; + }; }; }; @@ -237,6 +349,16 @@ &pio { compatible = "allwinner,sun5i-a13-pinctrl"; + lcd_rgb666_pins: lcd_rgb666@0 { + allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", + "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + allwinner,function = "lcd0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + uart1_pins_a: uart1@0 { allwinner,pins = "PE10", "PE11"; allwinner,function = "uart1"; diff --git a/arch/arm/boot/dts/sun5i-r8.dtsi b/arch/arm/boot/dts/sun5i-r8.dtsi index c04cf690b858..8b058f53b7dc 100644 --- a/arch/arm/boot/dts/sun5i-r8.dtsi +++ b/arch/arm/boot/dts/sun5i-r8.dtsi @@ -76,122 +76,12 @@ }; }; }; - - tcon0: lcd-controller@01c0c000 { - compatible = "allwinner,sun5i-a13-tcon"; - reg = <0x01c0c000 0x1000>; - interrupts = <44>; - resets = <&tcon_ch0_clk 1>; - reset-names = "lcd"; - clocks = <&ahb_gates 36>, - <&tcon_ch0_clk>, - <&tcon_ch1_clk>; - clock-names = "ahb", - "tcon-ch0", - "tcon-ch1"; - clock-output-names = "tcon-pixel-clock"; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - tcon0_in_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_out_tcon0>; - }; - }; - - tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - tcon0_out_tve0: endpoint@1 { - reg = <1>; - remote-endpoint = <&tve0_in_tcon0>; - }; - }; - }; - }; - - fe0: display-frontend@01e00000 { - compatible = "allwinner,sun5i-a13-display-frontend"; - reg = <0x01e00000 0x20000>; - interrupts = <47>; - clocks = <&ahb_gates 46>, <&de_fe_clk>, - <&dram_gates 25>; - clock-names = "ahb", "mod", - "ram"; - resets = <&de_fe_clk>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - fe0_out_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_in_fe0>; - }; - }; - }; - }; - - be0: display-backend@01e60000 { - compatible = "allwinner,sun5i-a13-display-backend"; - reg = <0x01e60000 0x10000>; - clocks = <&ahb_gates 44>, <&de_be_clk>, - <&dram_gates 26>; - clock-names = "ahb", "mod", - "ram"; - resets = <&de_be_clk>; - status = "disabled"; - - assigned-clocks = <&de_be_clk>; - assigned-clock-rates = <300000000>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - be0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - be0_in_fe0: endpoint@0 { - reg = <0>; - remote-endpoint = <&fe0_out_be0>; - }; - }; - - be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - be0_out_tcon0: endpoint@0 { - reg = <0>; - remote-endpoint = <&tcon0_in_be0>; - }; - }; - }; - }; }; +}; - display-engine { - compatible = "allwinner,sun5i-a13-display-engine"; - allwinner,pipelines = <&fe0>; +&tcon0_out { + tcon0_out_tve0: endpoint@1 { + reg = <1>; + remote-endpoint = <&tve0_in_tcon0>; }; }; diff --git a/arch/arm/boot/dts/sun5i-q8-common.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi index a78e189f6653..20cc940f5f91 100644 --- a/arch/arm/boot/dts/sun5i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi @@ -39,7 +39,7 @@ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ -#include "sunxi-q8-common.dtsi" +#include "sunxi-reference-design-tablet.dtsi" #include <dt-bindings/pwm/pwm.h> @@ -61,6 +61,13 @@ }; }; +&codec { + pinctrl-names = "default"; + pinctrl-0 = <&codec_pa_pin>; + allwinner,pa-gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */ + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc2>; }; @@ -85,9 +92,13 @@ #include "axp209.dtsi" +&lradc { + vref-supply = <®_ldo2>; +}; + &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ @@ -100,7 +111,14 @@ }; &pio { - mmc0_cd_pin_q8: mmc0_cd_pin@0 { + codec_pa_pin: codec_pa_pin@0 { + allwinner,pins = "PG10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin: mmc0_cd_pin@0 { allwinner,pins = "PG0"; allwinner,function = "gpio_in"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; @@ -154,6 +172,12 @@ regulator-name = "avcc"; }; +®_ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + ®_usb0_vbus { gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ status = "okay"; @@ -170,11 +194,17 @@ status = "okay"; }; +&usb_power_supply { + status = "okay"; +}; + &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_ldo3>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 0840612b5ed6..e374f4fc8073 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -130,7 +130,7 @@ }; pll3x2: pll3x2_clk { - compatible = "fixed-factor-clock"; + compatible = "allwinner,sun4i-a10-pll3-2x-clk", "fixed-factor-clock"; #clock-cells = <0>; clock-div = <1>; clock-mult = <2>; diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index 6e0e5687a09c..29016a13a2c1 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -65,12 +65,17 @@ pinctrl-0 = <&led_pins_m9>; blue { - label = "m9:blue:usr"; + label = "m9:blue:pwr"; gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; }; }; +&cpu0 { + cpu-supply = <®_dcdc3>; +}; + &ehci0 { status = "okay"; }; @@ -84,6 +89,7 @@ pinctrl-0 = <&gmac_pins_mii_a>; phy = <&phy1>; phy-mode = "mii"; + phy-supply = <®_dldo1>; status = "okay"; phy1: ethernet-phy@1 { @@ -100,13 +106,26 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; - vmmc-supply = <®_vcc3v3>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ cd-inverted; status = "okay"; }; +&p2wi { + status = "okay"; + + axp22x: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + &pio { led_pins_m9: led_pins@0 { allwinner,pins = "PH13"; @@ -130,6 +149,78 @@ }; }; +®_aldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpus"; /* This is an educated guess */ +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-sys-dll"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ethernet-phy"; +}; + +/* + * Both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached + * to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is + * marked as regulator-always-on. + */ +®_dldo4 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-usb-hub"; +}; + ®_usb1_vbus { pinctrl-names = "default"; pinctrl-0 = <&usb1_vbus_pin_m9>; @@ -145,5 +236,6 @@ &usbphy { usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_aldo1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts index 4dd70cce2127..5faeae429e2a 100644 --- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts +++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts @@ -65,12 +65,17 @@ pinctrl-0 = <&led_pins_m9>; blue { - label = "m9:blue:usr"; + label = "a1000g:blue:pwr"; gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; }; }; +&cpu0 { + cpu-supply = <®_dcdc3>; +}; + &ehci0 { status = "okay"; }; @@ -84,6 +89,7 @@ pinctrl-0 = <&gmac_pins_mii_a>; phy = <&phy1>; phy-mode = "mii"; + phy-supply = <®_dldo1>; status = "okay"; phy1: ethernet-phy@1 { @@ -100,13 +106,26 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; - vmmc-supply = <®_vcc3v3>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ cd-inverted; status = "okay"; }; +&p2wi { + status = "okay"; + + axp22x: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + &pio { led_pins_m9: led_pins@0 { allwinner,pins = "PH13"; @@ -130,6 +149,78 @@ }; }; +®_aldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpus"; /* This is an educated guess */ +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-sys-dll"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ethernet-phy"; +}; + +/* + * Both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached + * to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is + * marked as regulator-always-on. + */ +®_dldo4 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-usb-hub"; +}; + ®_usb1_vbus { pinctrl-names = "default"; pinctrl-0 = <&usb1_vbus_pin_m9>; @@ -150,5 +241,6 @@ &usbphy { usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_aldo1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts new file mode 100644 index 000000000000..ba5bca0fe997 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -0,0 +1,229 @@ +/* + * Copyright 2016 Luo Yi <luoyi.ly@gmail.com> + * + * Thanks to the original work by Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "Banana Pi BPI-M1-Plus"; + compatible = "sinovoip,bpi-m1-plus", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_bpi_m1p>; + + green { + label = "bananapi-m1-plus:green:usr"; + gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; + }; + + pwr { + label = "bananapi-m1-plus:pwr:usr"; + gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + mmc3_pwrseq: mmc3_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pwrseq_pin_bpi_m1p>; + reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */ + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_bpi_m1p>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; + }; +}; + +&ahci { + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m1p>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + cd-inverted; + status = "okay"; +}; + +&mmc3 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&mmc3_pwrseq>; + bus-width = <4>; + non-removable; + enable-sdio-wakeup; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + }; +}; + +&mmc3_pins_a { + /* AP6210 requires pull-up */ + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + gmac_power_pin_bpi_m1p: gmac_power_pin@0 { + allwinner,pins = "PH23"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_bpi_m1p: led_pins@0 { + allwinner,pins = "PH24", "PH25"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_bpi_m1p: mmc0_cd_pin@0 { + allwinner,pins = "PH10"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + mmc3_pwrseq_pin_bpi_m1p: mmc3_pwrseq_pin@0 { + allwinner,pins = "PH22"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts index 5ee43d8bf174..73c05dab0a69 100644 --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -95,6 +95,10 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc2>; }; @@ -110,13 +114,67 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_pins_rgmii_a>; - phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; status = "okay"; - phy1: ethernet-phy@1 { - reg = <1>; + fixed-link { + speed = <1000>; + full-duplex; + }; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + switch: ethernet-switch@1e { + compatible = "brcm,bcm53125"; + reg = <30>; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port0: port@0 { + reg = <0>; + label = "lan2"; + }; + + port1: port@1 { + reg = <1>; + label = "lan3"; + }; + + port2: port@2 { + reg = <2>; + label = "lan4"; + }; + + port3: port@3 { + reg = <3>; + label = "wan"; + }; + + port4: port@4 { + reg = <4>; + label = "lan1"; + }; + + port8: port@8 { + reg = <8>; + label = "cpu"; + ethernet = <&gmac>; + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; }; }; @@ -158,10 +216,6 @@ status = "okay"; }; -&ohci1 { - status = "okay"; -}; - &otg_sram { status = "okay"; }; @@ -199,7 +253,7 @@ #include "axp209.dtsi" ®_ahci_5v { - gpio = <&pio 1 3 0>; /* PB3 */ + gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ status = "okay"; }; @@ -232,11 +286,8 @@ status = "okay"; }; -®_usb1_vbus { - status = "okay"; -}; - ®_usb2_vbus { + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */ status = "okay"; }; @@ -275,13 +326,16 @@ status = "okay"; }; +&usb2_vbus_pin_a { + allwinner,pins = "PH12"; +}; + &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>; usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 2c34bbbb9570..bd0c47660243 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -67,9 +67,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, - <&ahb_gates 43>, <&ahb_gates 44>, - <&dram_gates 26>; + clocks = <&ahb_gates 36>, <&ahb_gates 43>, + <&ahb_gates 44>, <&de_be0_clk>, + <&tcon0_ch1_clk>, <&dram_gates 26>; status = "disabled"; }; @@ -77,8 +77,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; - clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, - <&ahb_gates 44>, <&dram_gates 26>; + clocks = <&ahb_gates 36>, <&ahb_gates 44>, + <&de_be0_clk>, <&tcon0_ch0_clk>, + <&dram_gates 26>; status = "disabled"; }; @@ -86,8 +87,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; - clocks = <&pll3>, <&pll5 1>, - <&ahb_gates 34>, <&ahb_gates 36>, <&ahb_gates 44>, + clocks = <&ahb_gates 34>, <&ahb_gates 36>, + <&ahb_gates 44>, + <&de_be0_clk>, <&tcon0_ch1_clk>, <&dram_gates 5>, <&dram_gates 26>; status = "disabled"; }; @@ -369,9 +371,9 @@ <5>, <6>, <7>, <8>, <10>; clock-output-names = "apb0_codec", "apb0_spdif", - "apb0_ac97", "apb0_iis0", "apb0_iis1", + "apb0_ac97", "apb0_i2s0", "apb0_i2s1", "apb0_pio", "apb0_ir0", "apb0_ir1", - "apb0_iis2", "apb0_keypad"; + "apb0_i2s2", "apb0_keypad"; }; apb1: clk@01c20058 { @@ -521,6 +523,28 @@ clock-output-names = "ir1"; }; + i2s0_clk: clk@01c200b8 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200b8 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "i2s0"; + }; + + ac97_clk: clk@01c200bc { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200bc 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "ac97"; + }; + spdif_clk: clk@01c200c0 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod1-clk"; @@ -558,6 +582,28 @@ clock-output-names = "spi3"; }; + i2s1_clk: clk@01c200d8 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200d8 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "i2s1"; + }; + + i2s2_clk: clk@01c200dc { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200dc 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "i2s2"; + }; + dram_gates: clk@01c20100 { #clock-cells = <1>; compatible = "allwinner,sun4i-a10-dram-gates-clk"; @@ -583,6 +629,80 @@ "dram_de_mp", "dram_ace"; }; + de_be0_clk: clk@01c20104 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20104 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-be0"; + }; + + de_be1_clk: clk@01c20108 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20108 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-be1"; + }; + + de_fe0_clk: clk@01c2010c { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c2010c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-fe0"; + }; + + de_fe1_clk: clk@01c20110 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20110 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-fe1"; + }; + + tcon0_ch0_clk: clk@01c20118 { + #clock-cells = <0>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; + reg = <0x01c20118 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon0-ch0-sclk"; + + }; + + tcon1_ch0_clk: clk@01c2011c { + #clock-cells = <0>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; + reg = <0x01c2011c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon1-ch0-sclk"; + + }; + + tcon0_ch1_clk: clk@01c2012c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; + reg = <0x01c2012c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon0-ch1-sclk"; + + }; + + tcon1_ch1_clk: clk@01c20130 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; + reg = <0x01c20130 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon1-ch1-sclk"; + + }; + ve_clk: clk@01c2013c { #clock-cells = <0>; #reset-cells = <0>; @@ -726,6 +846,19 @@ #dma-cells = <2>; }; + nfc: nand@01c03000 { + compatible = "allwinner,sun4i-a10-nand"; + reg = <0x01c03000 0x1000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ahb_gates 13>, <&nand_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma SUN4I_DMA_DEDICATED 3>; + dma-names = "rxtx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; @@ -958,160 +1091,177 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - pwm0_pins_a: pwm0@0 { - allwinner,pins = "PB2"; - allwinner,function = "pwm"; + clk_out_a_pins_a: clk_out_a@0 { + allwinner,pins = "PI12"; + allwinner,function = "clk_out_a"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - pwm1_pins_a: pwm1@0 { - allwinner,pins = "PI3"; - allwinner,function = "pwm"; + clk_out_b_pins_a: clk_out_b@0 { + allwinner,pins = "PI13"; + allwinner,function = "clk_out_b"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart0_pins_a: uart0@0 { - allwinner,pins = "PB22", "PB23"; - allwinner,function = "uart0"; + emac_pins_a: emac0@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + allwinner,function = "emac"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart2_pins_a: uart2@0 { - allwinner,pins = "PI16", "PI17", "PI18", "PI19"; - allwinner,function = "uart2"; + gmac_pins_mii_a: gmac_mii@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + allwinner,function = "gmac"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart3_pins_a: uart3@0 { - allwinner,pins = "PG6", "PG7", "PG8", "PG9"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; + gmac_pins_rgmii_a: gmac_rgmii@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA10", + "PA11", "PA12", "PA13", + "PA15", "PA16"; + allwinner,function = "gmac"; + /* + * data lines in RGMII mode use DDR mode + * and need a higher signal drive strength + */ + allwinner,drive = <SUN4I_PINCTRL_40_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart3_pins_b: uart3@1 { - allwinner,pins = "PH0", "PH1"; - allwinner,function = "uart3"; + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "i2c0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart4_pins_a: uart4@0 { - allwinner,pins = "PG10", "PG11"; - allwinner,function = "uart4"; + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PB18", "PB19"; + allwinner,function = "i2c1"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart4_pins_b: uart4@1 { - allwinner,pins = "PH4", "PH5"; - allwinner,function = "uart4"; + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PB20", "PB21"; + allwinner,function = "i2c2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart5_pins_a: uart5@0 { - allwinner,pins = "PI10", "PI11"; - allwinner,function = "uart5"; + i2c3_pins_a: i2c3@0 { + allwinner,pins = "PI0", "PI1"; + allwinner,function = "i2c3"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart6_pins_a: uart6@0 { - allwinner,pins = "PI12", "PI13"; - allwinner,function = "uart6"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + ir0_rx_pins_a: ir0@0 { + allwinner,pins = "PB4"; + allwinner,function = "ir0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart7_pins_a: uart7@0 { - allwinner,pins = "PI20", "PI21"; - allwinner,function = "uart7"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + ir0_tx_pins_a: ir0@1 { + allwinner,pins = "PB3"; + allwinner,function = "ir0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + ir1_rx_pins_a: ir1@0 { + allwinner,pins = "PB23"; + allwinner,function = "ir1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB18", "PB19"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + ir1_tx_pins_a: ir1@1 { + allwinner,pins = "PB22"; + allwinner,function = "ir1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB20", "PB21"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - i2c3_pins_a: i2c3@0 { - allwinner,pins = "PI0", "PI1"; - allwinner,function = "i2c3"; + mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { + allwinner,pins = "PH1"; + allwinner,function = "gpio_in"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + mmc2_pins_a: mmc2@0 { + allwinner,pins = "PC6", "PC7", "PC8", + "PC9", "PC10", "PC11"; + allwinner,function = "mmc2"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + mmc3_pins_a: mmc3@0 { + allwinner,pins = "PI4", "PI5", "PI6", + "PI7", "PI8", "PI9"; + allwinner,function = "mmc3"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - emac_pins_a: emac0@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "emac"; + ps20_pins_a: ps20@0 { + allwinner,pins = "PI20", "PI21"; + allwinner,function = "ps2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - clk_out_a_pins_a: clk_out_a@0 { - allwinner,pins = "PI12"; - allwinner,function = "clk_out_a"; + ps21_pins_a: ps21@0 { + allwinner,pins = "PH12", "PH13"; + allwinner,function = "ps2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - clk_out_b_pins_a: clk_out_b@0 { - allwinner,pins = "PI13"; - allwinner,function = "clk_out_b"; + pwm0_pins_a: pwm0@0 { + allwinner,pins = "PB2"; + allwinner,function = "pwm"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - gmac_pins_mii_a: gmac_mii@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "gmac"; + pwm1_pins_a: pwm1@0 { + allwinner,pins = "PI3"; + allwinner,function = "pwm"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - gmac_pins_rgmii_a: gmac_rgmii@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA10", - "PA11", "PA12", "PA13", - "PA15", "PA16"; - allwinner,function = "gmac"; - /* - * data lines in RGMII mode use DDR mode - * and need a higher signal drive strength - */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + spdif_tx_pins_a: spdif@0 { + allwinner,pins = "PB13"; + allwinner,function = "spdif"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; spi0_pins_a: spi0@0 { @@ -1177,84 +1327,67 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", - "PF3", "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; + uart0_pins_a: uart0@0 { + allwinner,pins = "PB22", "PB23"; + allwinner,function = "uart0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { - allwinner,pins = "PH1"; - allwinner,function = "gpio_in"; + uart2_pins_a: uart2@0 { + allwinner,pins = "PI16", "PI17", "PI18", "PI19"; + allwinner,function = "uart2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - mmc2_pins_a: mmc2@0 { - allwinner,pins = "PC6", "PC7", "PC8", - "PC9", "PC10", "PC11"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - mmc3_pins_a: mmc3@0 { - allwinner,pins = "PI4", "PI5", "PI6", - "PI7", "PI8", "PI9"; - allwinner,function = "mmc3"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir0_rx_pins_a: ir0@0 { - allwinner,pins = "PB4"; - allwinner,function = "ir0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + uart3_pins_a: uart3@0 { + allwinner,pins = "PG6", "PG7", "PG8", "PG9"; + allwinner,function = "uart3"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir0_tx_pins_a: ir0@1 { - allwinner,pins = "PB3"; - allwinner,function = "ir0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + uart3_pins_b: uart3@1 { + allwinner,pins = "PH0", "PH1"; + allwinner,function = "uart3"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir1_rx_pins_a: ir1@0 { - allwinner,pins = "PB23"; - allwinner,function = "ir1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + uart4_pins_a: uart4@0 { + allwinner,pins = "PG10", "PG11"; + allwinner,function = "uart4"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir1_tx_pins_a: ir1@1 { - allwinner,pins = "PB22"; - allwinner,function = "ir1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + uart4_pins_b: uart4@1 { + allwinner,pins = "PH4", "PH5"; + allwinner,function = "uart4"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ps20_pins_a: ps20@0 { - allwinner,pins = "PI20", "PI21"; - allwinner,function = "ps2"; + uart5_pins_a: uart5@0 { + allwinner,pins = "PI10", "PI11"; + allwinner,function = "uart5"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ps21_pins_a: ps21@0 { - allwinner,pins = "PH12", "PH13"; - allwinner,function = "ps2"; + uart6_pins_a: uart6@0 { + allwinner,pins = "PI12", "PI13"; + allwinner,function = "uart6"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - spdif_tx_pins_a: spdif@0 { - allwinner,pins = "PB13"; - allwinner,function = "spdif"; + uart7_pins_a: uart7@0 { + allwinner,pins = "PI20", "PI21"; + allwinner,function = "uart7"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -1320,6 +1453,32 @@ status = "disabled"; }; + i2s1: i2s@01c22000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-i2s"; + reg = <0x01c22000 0x400>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 4>, <&i2s1_clk>; + clock-names = "apb", "mod"; + dmas = <&dma SUN4I_DMA_NORMAL 4>, + <&dma SUN4I_DMA_NORMAL 4>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2s0: i2s@01c22400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-i2s"; + reg = <0x01c22400 0x400>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 3>, <&i2s0_clk>; + clock-names = "apb", "mod"; + dmas = <&dma SUN4I_DMA_NORMAL 3>, + <&dma SUN4I_DMA_NORMAL 3>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + lradc: lradc@01c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; @@ -1345,6 +1504,19 @@ reg = <0x01c23800 0x200>; }; + i2s2: i2s@01c24400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-i2s"; + reg = <0x01c24400 0x400>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 8>, <&i2s2_clk>; + clock-names = "apb", "mod"; + dmas = <&dma SUN4I_DMA_NORMAL 6>, + <&dma SUN4I_DMA_NORMAL 6>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + rtp: rtp@01c25000 { compatible = "allwinner,sun5i-a13-ts"; reg = <0x01c25000 0x100>; diff --git a/arch/arm/boot/dts/sun8i-a23-inet86dz.dts b/arch/arm/boot/dts/sun8i-a23-inet86dz.dts new file mode 100644 index 000000000000..0f9f71b14047 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a23-inet86dz.dts @@ -0,0 +1,58 @@ +/* + * Copyright 2016 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a23.dtsi" +#include "sun8i-reference-design-tablet.dtsi" + +/ { + model = "INet-86DZ Rev 01"; + compatible = "primux,inet86dz", "allwinner,sun8i-a23"; +}; + +&ehci0 { + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_dldo1>; +}; diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts new file mode 100644 index 000000000000..e3004428e7a7 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts @@ -0,0 +1,50 @@ +/* + * Copyright 2016 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a23.dtsi" +#include "sun8i-reference-design-tablet.dtsi" + +/ { + model = "Polaroid MID2407PXE03 tablet"; + compatible = "polaroid,mid2407pxe03", "allwinner,sun8i-a23"; +}; diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts index cb5daafcb7c2..6d06e24d446b 100644 --- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts +++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts @@ -42,202 +42,9 @@ /dts-v1/; #include "sun8i-a23.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> -#include <dt-bindings/pwm/pwm.h> +#include "sun8i-reference-design-tablet.dtsi" / { model = "Polaroid MID2809PXE04 tablet"; compatible = "polaroid,mid2809pxe04", "allwinner,sun8i-a23"; - - aliases { - serial0 = &r_uart; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin_mid2809>; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&ehci0 { - status = "okay"; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; -}; - -&lradc { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mid2809>; - vmmc-supply = <®_dcdc1>; - bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; - status = "okay"; -}; - -&pio { - bl_en_pin_mid2809: bl_en_pin@0 { - allwinner,pins = "PH6"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_cd_pin_mid2809: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; - status = "okay"; -}; - -&r_rsb { - status = "okay"; - - axp22x: pmic@3a3 { - compatible = "x-powers,axp223"; - reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - eldoin-supply = <®_dcdc1>; - }; -}; - -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; -}; - -#include "axp22x.dtsi" - -®_aldo1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-io"; -}; - -®_aldo2 { - regulator-always-on; - regulator-min-microvolt = <2350000>; - regulator-max-microvolt = <2650000>; - regulator-name = "vdd-dll"; -}; - -®_aldo3 { - regulator-always-on; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-pll-avcc"; -}; - -®_dc1sw { - regulator-name = "vcc-lcd"; -}; - -®_dc5ldo { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpus"; -}; - -®_dcdc1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-sys"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc5 { - regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc-dram"; -}; - -®_rtc_ldo { - regulator-name = "vcc-rtc"; -}; - -&simplefb_lcd { - vcc-lcd-supply = <®_dc1sw>; -}; - -/* - * FIXME for now we only support host mode and rely on u-boot to have - * turned on Vbus which is controlled by the axp223 pmic on the board. - * - * Once we have axp223 support we should switch to fully supporting otg. - */ -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts index 6062ea7a9903..956320a6cc78 100644 --- a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts +++ b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts @@ -48,18 +48,3 @@ model = "Q8 A23 Tablet"; compatible = "allwinner,q8-a23", "allwinner,sun8i-a23"; }; - -/* - * FIXME for now we only support host mode and rely on u-boot to have - * turned on Vbus which is controlled by the axp223 pmic on the board. - * - * Once we have axp223 support we should switch to fully supporting otg. - */ -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts index 1aefc6793e25..65660324005c 100644 --- a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts +++ b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts @@ -42,59 +42,18 @@ /dts-v1/; #include "sun8i-a33.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> +#include "sun8i-reference-design-tablet.dtsi" / { model = "Allwinner GA10H Quad Core Tablet (v1.1)"; compatible = "allwinner,ga10h-v1.1", "allwinner,sun8i-a33"; - - aliases { - serial0 = &r_uart; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; }; &ehci0 { status = "okay"; }; -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; -}; - &lradc { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; - button@600 { label = "Back"; linux,code = <KEY_BACK>; @@ -103,40 +62,6 @@ }; }; -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; - status = "okay"; -}; - &ohci0 { status = "okay"; }; - -&pio { - mmc0_cd_pin_q8h: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; -}; - -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts index 44b32296a025..b0bc2360f8c4 100644 --- a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts +++ b/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts @@ -48,18 +48,3 @@ model = "Q8 A33 Tablet"; compatible = "allwinner,q8-a33", "allwinner,sun8i-a33"; }; - -/* - * FIXME for now we only support host mode and rely on u-boot to have - * turned on Vbus which is controlled by the axp223 pmic on the board. - * - * Once we have axp223 support we should switch to fully supporting otg. - */ -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts new file mode 100644 index 000000000000..f3b1d5f6dbd2 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts @@ -0,0 +1,195 @@ +/* + * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Banana Pi BPI-M2-Plus"; + compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_led_bpi_m2p>; + + pwr_led { + label = "bananapi-m2-plus:red:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + default-state = "on"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&sw_r_bpi_m2p>; + + sw4 { + label = "power"; + linux,code = <BTN_0>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + }; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_en_bpi_m2p>; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + }; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&r_pio { + pwr_led_bpi_m2p: led_pins@0 { + allwinner,pins = "PL10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + sw_r_bpi_m2p: key_pins@0 { + allwinner,pins = "PL3"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + wifi_en_bpi_m2p: wifi_en_pin { + allwinner,pins = "PL7"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_a>; + status = "okay"; +}; + +&usbphy { + /* USB VBUS is on as long as VCC-IO is on */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 9871bad34742..fdf9fdbda267 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -327,13 +327,6 @@ interrupt-controller; #interrupt-cells = <3>; - uart0_pins_a: uart0@0 { - allwinner,pins = "PA4", "PA5"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - mmc0_pins_a: mmc0@0 { allwinner,pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -366,6 +359,20 @@ allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PA4", "PA5"; + allwinner,function = "uart0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + uart1_pins_a: uart1@0 { + allwinner,pins = "PG6", "PG7", "PG8", "PG9"; + allwinner,function = "uart1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; timer@01c20c00 { diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi index 346a49d805a7..60fa9585022b 100644 --- a/arch/arm/boot/dts/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -39,140 +39,13 @@ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ -#include "sunxi-q8-common.dtsi" +#include "sunxi-reference-design-tablet.dtsi" +#include "sun8i-reference-design-tablet.dtsi" -#include <dt-bindings/pwm/pwm.h> - -/ { - aliases { - serial0 = &r_uart; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin_q8>; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>; - vmmc-supply = <®_dcdc1>; - bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; - status = "okay"; -}; - -&pio { - bl_en_pin_q8: bl_en_pin@0 { - allwinner,pins = "PH6"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_cd_pin_q8: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; -}; - -&r_rsb { - status = "okay"; - - axp22x: pmic@3a3 { - compatible = "x-powers,axp223"; - reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - eldoin-supply = <®_dcdc1>; - }; -}; - -#include "axp22x.dtsi" - -®_aldo1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-io"; -}; - -®_aldo2 { - regulator-always-on; - regulator-min-microvolt = <2350000>; - regulator-max-microvolt = <2650000>; - regulator-name = "vdd-dll"; -}; - -®_aldo3 { - regulator-always-on; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-pll-avcc"; -}; - -®_dc1sw { - regulator-name = "vcc-lcd"; -}; - -®_dc5ldo { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpus"; -}; - -®_dcdc1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-sys"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc5 { - regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc-dram"; -}; - -®_rtc_ldo { - regulator-name = "vcc-rtc"; -}; - -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; +&ehci0 { + status = "okay"; }; -&simplefb_lcd { - vcc-lcd-supply = <®_dc1sw>; +&usbphy { + usb1_vbus-supply = <®_dldo1>; }; diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/sun8i-r16-parrot.dts new file mode 100644 index 000000000000..47553e522982 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-r16-parrot.dts @@ -0,0 +1,351 @@ +/* + * Copyright 2016 Quentin Schulz + * + * Quentin Schulz <quentin.schulz@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a33.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Allwinner R16 EVB (Parrot)"; + compatible = "allwinner,parrot", "allwinner,sun8i-a33"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_parrot>; + + led1 { + label = "parrot:led1:usr"; + gpio = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */ + }; + + led2 { + label = "parrot:led2:usr"; + gpio = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */ + }; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */ + }; + +}; + +&ehci0 { + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + /* + * FIXME: An as-yet-unknown accelerometer is connected to this + * i2c bus. + */ +}; + +&lradc { + vref-supply = <®_aldo3>; + status = "okay"; + + button@0 { + label = "V+"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <190000>; + }; + + button@1 { + label = "V-"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <390000>; + }; + +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_parrot>; + vmmc-supply = <®_dcdc1>; + cd-gpios = <&pio 3 14 GPIO_ACTIVE_LOW>; /* PD14 */ + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_parrot>; + vmmc-supply = <®_aldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&mmc2_8bit_pins { + allwinner,drive = <SUN4I_PINCTRL_40_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_parrot: mmc0_cd_pin@0 { + allwinner,pins = "PD14"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + led_pins_parrot: led_pins@0 { + allwinner,pins = "PE16", "PE17"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb0_id_det: usb0_id_detect_pin@0 { + allwinner,pins = "PD10"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb1_vbus_pin_parrot: usb1_vbus_pin@0 { + allwinner,pins = "PD12"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&r_pio { + wifi_reset_pin_parrot: wifi_reset_pin@0 { + allwinner,pins = "PL6"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&r_rsb { + status = "okay"; + + axp22x: pmic@3a3 { + compatible = "x-powers,axp223"; + reg = <0x3a3>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + drivevbus-supply = <®_vcc5v0>; + x-powers,drive-vbus-en; + }; +}; + +#include "axp22x.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-io"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2350000>; + regulator-max-microvolt = <2650000>; + regulator-name = "vdd-dll"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + /* + * TODO: WiFi chip needs dldo1 AND dldo2 to be on to be powered. + * Remove next line once it is possible to sync two regulators. + */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi0"; +}; + +®_dldo2 { + /* + * TODO: WiFi chip needs dldo1 AND dldo2 to be on to be powered. + * Remove next line once it is possible to sync two regulators. + */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi1"; +}; + +®_dldo3 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0-csi"; +}; + +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + +®_eldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-1v2-hsic"; +}; + +®_eldo2 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-dsp"; +}; + +®_eldo3 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "eldo3"; +}; + +®_usb1_vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_vbus_pin_parrot>; + gpio = <&pio 3 12 GPIO_ACTIVE_HIGH>; /* PD12 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_b>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_det>; + usb0_vbus-supply = <®_drivevbus>; + usb0_id_det-gpios = <&pio 3 10 GPIO_ACTIVE_HIGH>; /* PD10 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb1_vbus-supply = <®_usb1_vbus>; +}; diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi new file mode 100644 index 000000000000..9d9036140511 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi @@ -0,0 +1,216 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include "sunxi-reference-design-tablet.dtsi" + +#include <dt-bindings/pwm/pwm.h> + +/ { + aliases { + serial0 = &r_uart; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en_pin>; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; + +&pio { + bl_en_pin: bl_en_pin@0 { + allwinner,pins = "PH6"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH8"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&r_rsb { + status = "okay"; + + axp22x: pmic@3a3 { + compatible = "x-powers,axp223"; + reg = <0x3a3>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + drivevbus-supply = <®_vcc5v0>; + x-powers,drive-vbus-en; + }; +}; + +#include "axp22x.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-io"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2350000>; + regulator-max-microvolt = <2650000>; + regulator-name = "vdd-dll"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dc1sw { + regulator-name = "vcc-lcd"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + +&r_uart { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; + status = "okay"; +}; + +&simplefb_lcd { + vcc-lcd-supply = <®_dc1sw>; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index eb2ccd0a3bd5..1526b41c70f1 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -45,7 +45,6 @@ /dts-v1/; #include "sun9i-a80.dtsi" -#include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/sun4i-a10.h> @@ -79,26 +78,10 @@ }; }; -&pio { - led_pins_cubieboard4: led-pins@0 { - allwinner,pins = "PH6", "PH17"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 { - allwinner,pins = "PH18"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; -}; - &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */ cd-inverted; @@ -108,7 +91,7 @@ &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_pins>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <8>; non-removable; cap-mmc-hw-reset; @@ -120,14 +103,157 @@ allwinner,drive = <SUN4I_PINCTRL_40_MA>; }; +&pio { + led_pins_cubieboard4: led-pins@0 { + allwinner,pins = "PH6", "PH17"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 { + allwinner,pins = "PH18"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + &r_ir { status = "okay"; }; &r_rsb { status = "okay"; + + axp809: pmic@3a3 { + reg = <0x3a3>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + regulators { + reg_aldo1: aldo1 { + /* + * TODO: This should be handled by the + * USB PHY driver. + */ + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc33-usbh"; + }; + + reg_aldo2: aldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pb-io-cam"; + }; + + aldo3 { + /* unused */ + }; + + reg_dc5ldo: dc5ldo { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus-09-usbh"; + }; + + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v"; + }; + + reg_dcdc2: dcdc2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-gpu"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpua"; + }; + + reg_dcdc4: dcdc4 { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys-usb0-hdmi"; + }; + + reg_dcdc5: dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1425000>; + regulator-max-microvolt = <1575000>; + regulator-name = "vcc-dram"; + }; + + reg_dldo1: dldo1 { + /* + * The WiFi chip supports a wide range + * (3.0 ~ 4.8V) of voltages, and so does + * this regulator (3.0 ~ 4.2V), but + * Allwinner SDK always sets it to 3.3V. + */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; + }; + + reg_dldo2: dldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pl"; + }; + + reg_eldo1: eldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dvdd-cam"; + }; + + reg_eldo2: eldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pe"; + }; + + reg_eldo3: eldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pm-codec-io1"; + }; + + reg_ldo_io0: ldo_io0 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pg"; + }; + + reg_ldo_io1: ldo_io1 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-pa-gmac-2v5"; + }; + + reg_rtc_ldo: rtc_ldo { + regulator-name = "vcc-rtc-vdd1v8-io"; + }; + }; + }; }; +#include "axp809.dtsi" + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index d7a20d92b114..7fd22e888602 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -44,7 +44,6 @@ /dts-v1/; #include "sun9i-a80.dtsi" -#include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/sun4i-a10.h> @@ -85,6 +84,17 @@ }; }; + reg_usb1_vbus: usb1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_vbus_pin_optimus>; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + }; + reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -109,6 +119,31 @@ status = "okay"; }; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>; + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */ + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&mmc2_8bit_pins { + /* Increase drive strength for DDR modes */ + allwinner,drive = <SUN4I_PINCTRL_40_MA>; +}; + &ohci0 { status = "okay"; }; @@ -147,37 +182,6 @@ }; }; -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */ - cd-inverted; - status = "okay"; -}; - -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_8bit_pins>; - vmmc-supply = <®_vcc3v0>; - bus-width = <8>; - non-removable; - cap-mmc-hw-reset; - status = "okay"; -}; - -&mmc2_8bit_pins { - /* Increase drive strength for DDR modes */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; -}; - -®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_optimus>; - gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - status = "okay"; -}; - &r_ir { status = "okay"; }; @@ -193,8 +197,135 @@ &r_rsb { status = "okay"; + + axp809: pmic@3a3 { + reg = <0x3a3>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + regulators { + reg_aldo1: aldo1 { + /* + * TODO: This should be handled by the + * USB PHY driver. + */ + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc33-usbh"; + }; + + reg_aldo2: aldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pb-io-cam"; + }; + + aldo3 { + /* unused */ + }; + + reg_dc5ldo: dc5ldo { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus-09-usbh"; + }; + + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v"; + }; + + reg_dcdc2: dcdc2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-gpu"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpua"; + }; + + reg_dcdc4: dcdc4 { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys-usb0-hdmi"; + }; + + reg_dcdc5: dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1425000>; + regulator-max-microvolt = <1575000>; + regulator-name = "vcc-dram"; + }; + + reg_dldo1: dldo1 { + /* + * The WiFi chip supports a wide range + * (3.0 ~ 4.8V) of voltages, and so does + * this regulator (3.0 ~ 4.2V), but + * Allwinner SDK always sets it to 3.3V. + */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; + }; + + reg_dldo2: dldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pl"; + }; + + reg_eldo1: eldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dvdd-cam"; + }; + + reg_eldo2: eldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pe"; + }; + + reg_eldo3: eldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pm-codec-io1"; + }; + + reg_ldo_io0: ldo_io0 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pg"; + }; + + reg_ldo_io1: ldo_io1 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-pa-gmac-2v5"; + }; + + reg_rtc_ldo: rtc_ldo { + regulator-name = "vcc-rtc-vdd1v8-io"; + }; + }; + }; }; +#include "axp809.dtsi" + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sunxi-q8-common.dtsi b/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi index b8241462fcea..b8241462fcea 100644 --- a/arch/arm/boot/dts/sunxi-q8-common.dtsi +++ b/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index c970bf65c74c..1dfc492cc004 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -1149,7 +1149,7 @@ clk32k_in: clock@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts index 9d868af97b8e..70cf40996c3f 100644 --- a/arch/arm/boot/dts/tegra114-roth.dts +++ b/arch/arm/boot/dts/tegra114-roth.dts @@ -1020,9 +1020,9 @@ #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts index 89047edb5c5f..17dd14545862 100644 --- a/arch/arm/boot/dts/tegra114-tn7.dts +++ b/arch/arm/boot/dts/tegra114-tn7.dts @@ -277,7 +277,7 @@ #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; reg = <0>; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi new file mode 100644 index 000000000000..ca2c3a557895 --- /dev/null +++ b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi @@ -0,0 +1,1502 @@ +/* + * Copyright 2016 Toradex AG + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + clock@60006000 { + emc-timings-1 { + nvidia,ram-code = <1>; + + timing-12750000 { + clock-frequency = <12750000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-20400000 { + clock-frequency = <20400000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-40800000 { + clock-frequency = <40800000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-68000000 { + clock-frequency = <68000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-300000000 { + clock-frequency = <300000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C>; + clock-names = "emc-parent"; + }; + timing-396000000 { + clock-frequency = <396000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M>; + clock-names = "emc-parent"; + }; + timing-528000000 { + clock-frequency = <528000000>; + nvidia,parent-clock-frequency = <528000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + timing-600000000 { + clock-frequency = <600000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>; + clock-names = "emc-parent"; + }; + timing-792000000 { + clock-frequency = <792000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + timing-924000000 { + clock-frequency = <924000000>; + nvidia,parent-clock-frequency = <924000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + }; + }; + + emc@7001b000 { + emc-timings-1 { + nvidia,ram-code = <1>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 0x00000003 + 0x00000000 0x00000000 + 0x00000000 0x00000004 + 0x0000000a 0x00000005 + 0x0000000b 0x00000000 + 0x00000000 0x00000003 + 0x00000003 0x00000000 + 0x00000006 0x00000006 + 0x00000006 0x00000002 + 0x00000000 0x00000005 + 0x00000005 0x00010000 + 0x00000003 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000004 + 0x0000000c 0x0000000d + 0x0000000f 0x00000060 + 0x00000000 0x00000018 + 0x00000002 0x00000002 + 0x00000001 0x00000000 + 0x00000007 0x0000000f + 0x00000005 0x00000005 + 0x00000004 0x00000005 + 0x00000004 0x00000000 + 0x00000000 0x00000005 + 0x00000005 0x00000064 + 0x00000000 0x00000000 + 0x00000000 0x106aa298 + 0x002c00a0 0x00008000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x000fc000 0x000fc000 + 0x000fc000 0x000fc000 + 0x0000fc00 0x0000fc00 + 0x0000fc00 0x0000fc00 + 0x10000280 0x00000000 + 0x00111111 0x00000000 + 0x00000000 0x77ffc081 + 0x00000e0e 0x81f1f108 + 0x07070004 0x0000003f + 0x016eeeee 0x51451400 + 0x00514514 0x00514514 + 0x51451400 0x0000003f + 0x00000007 0x00000000 + 0x00000042 0x000e000e + 0x00000000 0x00000003 + 0x0000f2f3 0x800001c5 + 0x0000000a + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 0x00000005 + 0x00000000 0x00000000 + 0x00000000 0x00000004 + 0x0000000a 0x00000005 + 0x0000000b 0x00000000 + 0x00000000 0x00000003 + 0x00000003 0x00000000 + 0x00000006 0x00000006 + 0x00000006 0x00000002 + 0x00000000 0x00000005 + 0x00000005 0x00010000 + 0x00000003 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000004 + 0x0000000c 0x0000000d + 0x0000000f 0x0000009a + 0x00000000 0x00000026 + 0x00000002 0x00000002 + 0x00000001 0x00000000 + 0x00000007 0x0000000f + 0x00000006 0x00000006 + 0x00000004 0x00000005 + 0x00000004 0x00000000 + 0x00000000 0x00000005 + 0x00000005 0x000000a0 + 0x00000000 0x00000000 + 0x00000000 0x106aa298 + 0x002c00a0 0x00008000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x000fc000 0x000fc000 + 0x000fc000 0x000fc000 + 0x0000fc00 0x0000fc00 + 0x0000fc00 0x0000fc00 + 0x10000280 0x00000000 + 0x00111111 0x00000000 + 0x00000000 0x77ffc081 + 0x00000e0e 0x81f1f108 + 0x07070004 0x0000003f + 0x016eeeee 0x51451400 + 0x00514514 0x00514514 + 0x51451400 0x0000003f + 0x0000000b 0x00000000 + 0x00000042 0x000e000e + 0x00000000 0x00000003 + 0x0000f2f3 0x8000023a + 0x0000000a + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000001 0x0000000a + 0x00000000 0x00000001 + 0x00000000 0x00000004 + 0x0000000a 0x00000005 + 0x0000000b 0x00000000 + 0x00000000 0x00000003 + 0x00000003 0x00000000 + 0x00000006 0x00000006 + 0x00000006 0x00000002 + 0x00000000 0x00000005 + 0x00000005 0x00010000 + 0x00000003 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000004 + 0x0000000c 0x0000000d + 0x0000000f 0x00000134 + 0x00000000 0x0000004d + 0x00000002 0x00000002 + 0x00000001 0x00000000 + 0x00000008 0x0000000f + 0x0000000c 0x0000000c + 0x00000004 0x00000005 + 0x00000004 0x00000000 + 0x00000000 0x00000005 + 0x00000005 0x0000013f + 0x00000000 0x00000000 + 0x00000000 0x106aa298 + 0x002c00a0 0x00008000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x000fc000 0x000fc000 + 0x000fc000 0x000fc000 + 0x0000fc00 0x0000fc00 + 0x0000fc00 0x0000fc00 + 0x10000280 0x00000000 + 0x00111111 0x00000000 + 0x00000000 0x77ffc081 + 0x00000e0e 0x81f1f108 + 0x07070004 0x0000003f + 0x016eeeee 0x51451400 + 0x00514514 0x00514514 + 0x51451400 0x0000003f + 0x00000015 0x00000000 + 0x00000042 0x000e000e + 0x00000000 0x00000003 + 0x0000f2f3 0x80000370 + 0x0000000a + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000003 0x00000011 + 0x00000000 0x00000002 + 0x00000000 0x00000004 + 0x0000000a 0x00000005 + 0x0000000b 0x00000000 + 0x00000000 0x00000003 + 0x00000003 0x00000000 + 0x00000006 0x00000006 + 0x00000006 0x00000002 + 0x00000000 0x00000005 + 0x00000005 0x00010000 + 0x00000003 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000004 + 0x0000000c 0x0000000d + 0x0000000f 0x00000202 + 0x00000000 0x00000080 + 0x00000002 0x00000002 + 0x00000001 0x00000000 + 0x0000000f 0x0000000f + 0x00000013 0x00000013 + 0x00000004 0x00000005 + 0x00000004 0x00000001 + 0x00000000 0x00000005 + 0x00000005 0x00000213 + 0x00000000 0x00000000 + 0x00000000 0x106aa298 + 0x002c00a0 0x00008000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x000fc000 0x000fc000 + 0x000fc000 0x000fc000 + 0x0000fc00 0x0000fc00 + 0x0000fc00 0x0000fc00 + 0x10000280 0x00000000 + 0x00111111 0x00000000 + 0x00000000 0x77ffc081 + 0x00000e0e 0x81f1f108 + 0x07070004 0x0000003f + 0x016eeeee 0x51451400 + 0x00514514 0x00514514 + 0x51451400 0x0000003f + 0x00000022 0x00000000 + 0x00000042 0x000e000e + 0x00000000 0x00000003 + 0x0000f2f3 0x8000050e + 0x0000000a + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000004 0x0000001a + 0x00000000 0x00000003 + 0x00000001 0x00000004 + 0x0000000a 0x00000005 + 0x0000000b 0x00000001 + 0x00000001 0x00000003 + 0x00000003 0x00000000 + 0x00000006 0x00000006 + 0x00000006 0x00000002 + 0x00000000 0x00000005 + 0x00000005 0x00010000 + 0x00000003 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000004 + 0x0000000c 0x0000000d + 0x0000000f 0x00000304 + 0x00000000 0x000000c1 + 0x00000002 0x00000002 + 0x00000001 0x00000000 + 0x00000018 0x0000000f + 0x0000001c 0x0000001c + 0x00000004 0x00000005 + 0x00000004 0x00000002 + 0x00000000 0x00000005 + 0x00000005 0x0000031c + 0x00000000 0x00000000 + 0x00000000 0x106aa298 + 0x002c00a0 0x00008000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x000fc000 0x000fc000 + 0x000fc000 0x000fc000 + 0x0000fc00 0x0000fc00 + 0x0000fc00 0x0000fc00 + 0x10000280 0x00000000 + 0x00111111 0x00000000 + 0x00000000 0x77ffc081 + 0x00000e0e 0x81f1f108 + 0x07070004 0x0000003f + 0x016eeeee 0x51451400 + 0x00514514 0x00514514 + 0x51451400 0x0000003f + 0x00000033 0x00000000 + 0x00000042 0x000e000e + 0x00000000 0x00000003 + 0x0000f2f3 0x80000713 + 0x0000000a + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008cd>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000009 0x00000035 + 0x00000000 0x00000006 + 0x00000002 0x00000005 + 0x0000000a 0x00000005 + 0x0000000b 0x00000002 + 0x00000002 0x00000003 + 0x00000003 0x00000000 + 0x00000005 0x00000005 + 0x00000006 0x00000002 + 0x00000000 0x00000004 + 0x00000006 0x00010000 + 0x00000003 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000003 + 0x0000000d 0x0000000f + 0x00000011 0x00000607 + 0x00000000 0x00000181 + 0x00000002 0x00000002 + 0x00000001 0x00000000 + 0x00000032 0x0000000f + 0x00000038 0x00000038 + 0x00000004 0x00000005 + 0x00000004 0x00000006 + 0x00000000 0x00000005 + 0x00000005 0x00000638 + 0x00000000 0x00000000 + 0x00000000 0x106aa298 + 0x002c00a0 0x00008000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00008000 0x00000000 + 0x00000000 0x00008000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00090000 0x00090000 + 0x00090000 0x00090000 + 0x00009000 0x00009000 + 0x00009000 0x00009000 + 0x10000280 0x00000000 + 0x00111111 0x00000000 + 0x00000000 0x77ffc081 + 0x00000707 0x81f1f108 + 0x07070004 0x0000003f + 0x016eeeee 0x51451400 + 0x00514514 0x00514514 + 0x51451400 0x0000003f + 0x00000066 0x00000000 + 0x00000100 0x000e000e + 0x00000000 0x00000003 + 0x0000d2b3 0x80000d22 + 0x0000000a + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x000008d5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000321>; + nvidia,emc-mrs-wait-cnt = <0x0173000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000000d 0x0000004d + 0x00000000 0x00000009 + 0x00000003 0x00000004 + 0x00000008 0x00000002 + 0x00000009 0x00000003 + 0x00000003 0x00000002 + 0x00000002 0x00000000 + 0x00000003 0x00000003 + 0x00000005 0x00000002 + 0x00000000 0x00000002 + 0x00000007 0x00020000 + 0x00000003 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000001 + 0x0000000e 0x00000010 + 0x00000012 0x000008e4 + 0x00000000 0x00000239 + 0x00000001 0x00000008 + 0x00000001 0x00000000 + 0x0000004b 0x0000000e + 0x00000052 0x00000200 + 0x00000004 0x00000005 + 0x00000004 0x00000008 + 0x00000000 0x00000005 + 0x00000005 0x00000924 + 0x00000000 0x00000000 + 0x00000000 0x104ab098 + 0x002c00a0 0x00008000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00098000 0x00098000 + 0x00000000 0x00098000 + 0x00098000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00050000 0x00050000 + 0x00050000 0x00050000 + 0x00005000 0x00005000 + 0x00005000 0x00005000 + 0x10000280 0x00000000 + 0x00111111 0x00000000 + 0x00000000 0x77ffc081 + 0x00000505 0x81f1f108 + 0x07070004 0x00000000 + 0x016eeeee 0x51451420 + 0x00514514 0x00514514 + 0x51451400 0x0000003f + 0x00000096 0x00000000 + 0x00000100 0x0173000e + 0x00000000 0x00000003 + 0x000052a3 0x800012d7 + 0x00000009 + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x00000895>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000521>; + nvidia,emc-mrs-wait-cnt = <0x015b000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000011 0x00000066 + 0x00000000 0x0000000c + 0x00000004 0x00000004 + 0x00000008 0x00000002 + 0x0000000a 0x00000004 + 0x00000004 0x00000002 + 0x00000002 0x00000000 + 0x00000003 0x00000003 + 0x00000005 0x00000002 + 0x00000000 0x00000001 + 0x00000008 0x00020000 + 0x00000003 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x0000000f 0x00000010 + 0x00000012 0x00000bd1 + 0x00000000 0x000002f4 + 0x00000001 0x00000008 + 0x00000001 0x00000000 + 0x00000063 0x0000000f + 0x0000006c 0x00000200 + 0x00000004 0x00000005 + 0x00000004 0x0000000b + 0x00000000 0x00000005 + 0x00000005 0x00000c11 + 0x00000000 0x00000000 + 0x00000000 0x104ab098 + 0x002c00a0 0x00008000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00070000 0x00070000 + 0x00000000 0x00070000 + 0x00070000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00038000 0x00038000 + 0x00038000 0x00038000 + 0x00003800 0x00003800 + 0x00003800 0x00003800 + 0x10000280 0x00000000 + 0x00111111 0x00000000 + 0x00000000 0x77ffc081 + 0x00000505 0x81f1f108 + 0x07070004 0x00000000 + 0x016eeeee 0x51451420 + 0x00514514 0x00514514 + 0x51451400 0x0000003f + 0x000000c6 0x00000000 + 0x00000100 0x015b000e + 0x00000000 0x00000003 + 0x000052a3 0x8000188b + 0x00000009 + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000941>; + nvidia,emc-mrs-wait-cnt = <0x0139000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0123133d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000018 0x00000088 + 0x00000000 0x00000010 + 0x00000006 0x00000006 + 0x00000009 0x00000002 + 0x0000000d 0x00000006 + 0x00000006 0x00000002 + 0x00000002 0x00000000 + 0x00000003 0x00000003 + 0x00000006 0x00000002 + 0x00000000 0x00000001 + 0x00000009 0x00030000 + 0x00000003 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000010 0x00000012 + 0x00000014 0x00000fd6 + 0x00000000 0x000003f5 + 0x00000002 0x0000000b + 0x00000001 0x00000000 + 0x00000085 0x00000012 + 0x00000090 0x00000200 + 0x00000004 0x00000005 + 0x00000004 0x00000010 + 0x00000000 0x00000006 + 0x00000006 0x00001017 + 0x00000000 0x00000000 + 0x00000000 0x104ab098 + 0xe01200b1 0x00008000 + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00054000 0x00054000 + 0x00000000 0x00054000 + 0x00054000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x0000000c 0x0000000c + 0x0000000c 0x0000000c + 0x0000000c 0x0000000c + 0x0000000c 0x0000000c + 0x100002a0 0x00000000 + 0x00111111 0x00000000 + 0x00000000 0x77ffc085 + 0x00000505 0x81f1f108 + 0x07070004 0x00000000 + 0x016eeeee 0x51451420 + 0x00514514 0x00514514 + 0x51451400 0x0606003f + 0x00000000 0x00000000 + 0x00000100 0x0139000e + 0x00000000 0x00000003 + 0x000042a0 0x80002062 + 0x0000000a + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200010>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000b61>; + nvidia,emc-mrs-wait-cnt = <0x0127000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0121113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000001b 0x0000009b + 0x00000000 0x00000013 + 0x00000007 0x00000007 + 0x0000000b 0x00000003 + 0x00000010 0x00000007 + 0x00000007 0x00000002 + 0x00000002 0x00000000 + 0x00000005 0x00000005 + 0x0000000a 0x00000002 + 0x00000000 0x00000003 + 0x0000000b 0x00070000 + 0x00000003 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000002 + 0x00000012 0x00000016 + 0x00000018 0x00001208 + 0x00000000 0x00000482 + 0x00000002 0x0000000d + 0x00000001 0x00000000 + 0x00000097 0x00000015 + 0x000000a3 0x00000200 + 0x00000004 0x00000005 + 0x00000004 0x00000013 + 0x00000000 0x00000006 + 0x00000006 0x00001248 + 0x00000000 0x00000000 + 0x00000000 0x104ab098 + 0xe00e00b1 0x00008000 + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00048000 0x00048000 + 0x00000000 0x00048000 + 0x00048000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x0000000d 0x0000000d + 0x0000000d 0x0000000d + 0x0000000d 0x0000000d + 0x0000000d 0x0000000d + 0x100002a0 0x00000000 + 0x00111111 0x00000000 + 0x00000000 0x77ffc085 + 0x00000505 0x81f1f108 + 0x07070004 0x00000000 + 0x016eeeee 0x51451420 + 0x00514514 0x00514514 + 0x51451400 0x0606003f + 0x00000000 0x00000000 + 0x00000100 0x0127000e + 0x00000000 0x00000003 + 0x000040a0 0x800024aa + 0x0000000e + >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200018>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000d71>; + nvidia,emc-mrs-wait-cnt = <0x00f7000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040000>; + nvidia,emc-xm2dqspadctrl2 = <0x0120113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000024 0x000000cd + 0x00000000 0x00000019 + 0x0000000a 0x00000008 + 0x0000000d 0x00000004 + 0x00000013 0x0000000a + 0x0000000a 0x00000004 + 0x00000002 0x00000000 + 0x00000006 0x00000006 + 0x0000000b 0x00000002 + 0x00000000 0x00000002 + 0x0000000d 0x00080000 + 0x00000004 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000001 + 0x00000014 0x00000018 + 0x0000001a 0x000017e2 + 0x00000000 0x000005f8 + 0x00000003 0x00000011 + 0x00000001 0x00000000 + 0x000000c7 0x00000018 + 0x000000d7 0x00000200 + 0x00000005 0x00000006 + 0x00000005 0x00000019 + 0x00000000 0x00000008 + 0x00000008 0x00001822 + 0x00000000 0x00000000 + 0x00000000 0x104ab098 + 0xe00700b1 0x00008000 + 0x007fc008 0x007fc008 + 0x007fc008 0x007fc008 + 0x007fc008 0x007fc008 + 0x007fc008 0x007fc008 + 0x007fc008 0x007fc008 + 0x007fc008 0x007fc008 + 0x007fc008 0x007fc008 + 0x007fc008 0x007fc008 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00034000 0x00034000 + 0x00000000 0x00034000 + 0x00034000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000005 0x00000005 + 0x00000005 0x00000005 + 0x00000005 0x00000005 + 0x00000005 0x00000005 + 0x00000005 0x00000005 + 0x00000005 0x00000005 + 0x00000005 0x00000005 + 0x00000005 0x00000005 + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x100002a0 0x00000000 + 0x00111111 0x00000000 + 0x00000000 0x77ffc085 + 0x00000000 0x81f1f108 + 0x07070004 0x00000000 + 0x016eeeee 0x61861820 + 0x00514514 0x00514514 + 0x61861800 0x0606003f + 0x00000000 0x00000000 + 0x00000100 0x00f7000e + 0x00000000 0x00000004 + 0x00004080 0x80003012 + 0x0000000f + >; + }; + + timing-924000000 { + clock-frequency = <924000000>; + + nvidia,emc-auto-cal-config = <0xa1430303>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200020>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000f15>; + nvidia,emc-mrs-wait-cnt = <0x00cd000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040000>; + nvidia,emc-xm2dqspadctrl2 = <0x0120113d>; + nvidia,emc-zcal-cnt-long = <0x0000004c>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000002b 0x000000f0 + 0x00000000 0x0000001e + 0x0000000b 0x00000009 + 0x0000000f 0x00000005 + 0x00000016 0x0000000b + 0x0000000b 0x00000004 + 0x00000002 0x00000000 + 0x00000007 0x00000007 + 0x0000000d 0x00000002 + 0x00000000 0x00000002 + 0x0000000f 0x000a0000 + 0x00000004 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000001 + 0x00000016 0x0000001a + 0x0000001c 0x00001be7 + 0x00000000 0x000006f9 + 0x00000004 0x00000015 + 0x00000001 0x00000000 + 0x000000e7 0x0000001b + 0x000000fb 0x00000200 + 0x00000006 0x00000007 + 0x00000006 0x0000001e + 0x00000000 0x0000000a + 0x0000000a 0x00001c28 + 0x00000000 0x00000000 + 0x00000000 0x104ab898 + 0xe00400b1 0x00008000 + 0x007f800a 0x007f800a + 0x007f800a 0x007f800a + 0x007f800a 0x007f800a + 0x007f800a 0x007f800a + 0x007f800a 0x007f800a + 0x007f800a 0x007f800a + 0x007f800a 0x007f800a + 0x007f800a 0x007f800a + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x0002c000 0x0002c000 + 0x00000000 0x0002c000 + 0x0002c000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000004 0x00000004 + 0x00000004 0x00000004 + 0x00000004 0x00000004 + 0x00000004 0x00000004 + 0x00000004 0x00000004 + 0x00000004 0x00000004 + 0x00000004 0x00000004 + 0x00000004 0x00000004 + 0x00000008 0x00000008 + 0x00000008 0x00000008 + 0x00000008 0x00000008 + 0x00000008 0x00000008 + 0x100002a0 0x00000000 + 0x00111111 0x00000000 + 0x00000000 0x77ffc085 + 0x00000000 0x81f1f108 + 0x07070004 0x00000000 + 0x016eeeee 0x5d75d720 + 0x00514514 0x00514514 + 0x5d75d700 0x0606003f + 0x00000000 0x00000000 + 0x00000128 0x00cd000e + 0x00000000 0x00000004 + 0x00004080 0x800037ea + 0x00000011 + >; + }; + + }; + }; + + memory-controller@70019000 { + emc-timings-1 { + nvidia,ram-code = <1>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emem-configuration = < + 0x40040001 0x8000000a + 0x00000001 0x00000001 + 0x00000002 0x00000000 + 0x00000002 0x00000001 + 0x00000003 0x00000008 + 0x00000003 0x00000002 + 0x00000003 0x00000006 + 0x06030203 0x000a0502 + 0x77e30303 0x70000f03 + 0x001f0000 + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emem-configuration = < + 0x40020001 0x80000012 + 0x00000001 0x00000001 + 0x00000002 0x00000000 + 0x00000002 0x00000001 + 0x00000003 0x00000008 + 0x00000003 0x00000002 + 0x00000003 0x00000006 + 0x06030203 0x000a0502 + 0x76230303 0x70000f03 + 0x001f0000 + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emem-configuration = < + 0xa0000001 0x80000017 + 0x00000001 0x00000001 + 0x00000002 0x00000000 + 0x00000002 0x00000001 + 0x00000003 0x00000008 + 0x00000003 0x00000002 + 0x00000003 0x00000006 + 0x06030203 0x000a0502 + 0x74a30303 0x70000f03 + 0x001f0000 + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emem-configuration = < + 0x00000001 0x8000001e + 0x00000001 0x00000001 + 0x00000002 0x00000000 + 0x00000002 0x00000001 + 0x00000003 0x00000008 + 0x00000003 0x00000002 + 0x00000003 0x00000006 + 0x06030203 0x000a0502 + 0x74230403 0x70000f03 + 0x001f0000 + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emem-configuration = < + 0x08000001 0x80000026 + 0x00000001 0x00000001 + 0x00000003 0x00000000 + 0x00000002 0x00000001 + 0x00000003 0x00000008 + 0x00000003 0x00000002 + 0x00000003 0x00000006 + 0x06030203 0x000a0503 + 0x73c30504 0x70000f03 + 0x001f0000 + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emem-configuration = < + 0x01000003 0x80000040 + 0x00000001 0x00000001 + 0x00000004 0x00000002 + 0x00000003 0x00000001 + 0x00000003 0x00000008 + 0x00000003 0x00000002 + 0x00000004 0x00000006 + 0x06040203 0x000a0504 + 0x73840a05 0x70000f03 + 0x001f0000 + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emem-configuration = < + 0x08000004 0x80000040 + 0x00000001 0x00000002 + 0x00000007 0x00000004 + 0x00000004 0x00000001 + 0x00000002 0x00000007 + 0x00000002 0x00000002 + 0x00000004 0x00000006 + 0x06040202 0x000b0607 + 0x77450e08 0x70000f03 + 0x001f0000 + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emem-configuration = < + 0x0f000005 0x80000040 + 0x00000001 0x00000002 + 0x00000009 0x00000005 + 0x00000006 0x00000001 + 0x00000002 0x00000008 + 0x00000002 0x00000002 + 0x00000004 0x00000006 + 0x06040202 0x000d0709 + 0x7586120a 0x70000f03 + 0x001f0000 + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emem-configuration = < + 0x0f000007 0x80000040 + 0x00000002 0x00000003 + 0x0000000c 0x00000007 + 0x00000008 0x00000001 + 0x00000002 0x00000009 + 0x00000002 0x00000002 + 0x00000005 0x00000006 + 0x06050202 0x0010090c + 0x7428180d 0x70000f03 + 0x001f0000 + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emem-configuration = < + 0x00000009 0x80000040 + 0x00000003 0x00000004 + 0x0000000e 0x00000009 + 0x0000000a 0x00000001 + 0x00000003 0x0000000b + 0x00000002 0x00000002 + 0x00000005 0x00000007 + 0x07050202 0x00130b0e + 0x73a91b0f 0x70000f03 + 0x001f0000 + >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emem-configuration = < + 0x0e00000b 0x80000040 + 0x00000004 0x00000005 + 0x00000013 0x0000000c + 0x0000000d 0x00000002 + 0x00000003 0x0000000c + 0x00000002 0x00000002 + 0x00000006 0x00000008 + 0x08060202 0x00170e13 + 0x736c2414 0x70000f02 + 0x001f0000 + >; + }; + + timing-924000000 { + clock-frequency = <924000000>; + + nvidia,emem-configuration = < + 0x0e00000d 0x80000040 + 0x00000005 0x00000006 + 0x00000016 0x0000000e + 0x0000000f 0x00000002 + 0x00000004 0x0000000e + 0x00000002 0x00000002 + 0x00000006 0x00000009 + 0x09060202 0x001a1016 + 0x734e2a17 0x70000f02 + 0x001f0000 + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts new file mode 100644 index 000000000000..653044a44f0d --- /dev/null +++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts @@ -0,0 +1,284 @@ +/* + * Copyright 2016 Toradex AG + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "tegra124-apalis.dtsi" + +/ { + model = "Toradex Apalis TK1 on Apalis Evaluation Board"; + compatible = "toradex,apalis-tk1-eval", "toradex,apalis-tk1", + "nvidia,tegra124"; + + aliases { + rtc0 = "/i2c@7000c000/rtc@68"; + rtc1 = "/i2c@7000d000/pmic@40"; + rtc2 = "/rtc@7000e000"; + serial0 = &uarta; + serial1 = &uartb; + serial2 = &uartc; + serial3 = &uartd; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + pcie-controller@01003000 { + pci@1,0 { + status = "okay"; + }; + }; + + host1x@50000000 { + hdmi@54280000 { + status = "okay"; + }; + }; + + /* Apalis UART1 */ + serial@70006000 { + status = "okay"; + }; + + /* Apalis UART2 */ + serial@70006040 { + status = "okay"; + }; + + /* Apalis UART3 */ + serial@70006200 { + status = "okay"; + }; + + /* Apalis UART4 */ + serial@70006300 { + status = "okay"; + }; + + pwm@7000a000 { + status = "okay"; + }; + + /* + * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier + * board) + */ + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + + pcie-switch@58 { + compatible = "plx,pex8605"; + reg = <0x58>; + }; + + /* M41T0M6 real time clock on carrier board */ + rtc@68 { + compatible = "st,m41t00"; + reg = <0x68>; + }; + }; + + /* + * GEN2_I2C: I2C2_SDA/SCL (DDC) on MXM3 pin 205/207 (e.g. display EDID) + */ + hdmi_ddc: i2c@7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* + * CAM_I2C: I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor + * on carrier board) + */ + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* I2C4 (DDC): unused */ + + /* SPI1: Apalis SPI1 */ + spi@7000d400 { + status = "okay"; + spi-max-frequency = <50000000>; + + spidev0: spidev@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <50000000>; + }; + }; + + /* SPI4: Apalis SPI2 */ + spi@7000da00 { + status = "okay"; + spi-max-frequency = <50000000>; + + spidev1: spidev@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <50000000>; + }; + }; + + /* Apalis Serial ATA */ + sata@70020000 { + status = "okay"; + }; + + hda@70030000 { + status = "okay"; + }; + + usb@70090000 { + status = "okay"; + }; + + /* Apalis MMC1 */ + sdhci@700b0000 { + status = "okay"; + /* MMC1_CD# */ + cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>; + bus-width = <4>; + vqmmc-supply = <&vddio_sdmmc1>; + }; + + /* Apalis SD1 */ + sdhci@700b0400 { + status = "okay"; + /* + * Don't use SD1_CD# aka SDMMC3_CLK_LB_OUT for now as it + * features some magic properties even though the external + * loopback is disabled and the internal loopback used as per + * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits being + * set to 0xfffd according to the TRM! + * cd-gpios = <&gpio TEGRA_GPIO(EE, 4) GPIO_ACTIVE_LOW>; + */ + bus-width = <4>; + vqmmc-supply = <&vddio_sdmmc3>; + }; + + /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */ + usb@7d000000 { + status = "okay"; + dr_mode = "otg"; + }; + + usb-phy@7d000000 { + status = "okay"; + vbus-supply = <®_usbo1_vbus>; + }; + + /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */ + usb@7d004000 { + status = "okay"; + }; + + usb-phy@7d004000 { + status = "okay"; + vbus-supply = <®_usbh_vbus>; + }; + + /* EHCI instance 2: USB3_DP/N -> USBH4_DP/N */ + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + status = "okay"; + vbus-supply = <®_usbh_vbus>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + + /* BKL1_PWM */ + pwms = <&pwm 3 5000000>; + brightness-levels = <255 231 223 207 191 159 127 0>; + default-brightness-level = <6>; + /* BKL1_ON */ + enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + wakeup { + label = "WAKE1_MICO"; + gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V_SW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + /* USBO1_EN */ + reg_usbo1_vbus: regulator-usbo1-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USBO1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_5v0>; + }; + + /* USBH_EN */ + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USBH(2A|2C|2D|3|4)"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_5v0>; + }; +}; diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi new file mode 100644 index 000000000000..e7a73db17613 --- /dev/null +++ b/arch/arm/boot/dts/tegra124-apalis.dtsi @@ -0,0 +1,2100 @@ +/* + * Copyright 2016 Toradex AG + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "tegra124.dtsi" +#include "tegra124-apalis-emc.dtsi" + +/* + * Toradex Apalis TK1 Module Device Tree + * Compatible for Revisions 2GB: V1.0A + */ +/ { + model = "Toradex Apalis TK1"; + compatible = "toradex,apalis-tk1", "nvidia,tegra124"; + + memory { + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + pcie-controller@01003000 { + status = "okay"; + + avddio-pex-supply = <&vdd_1v05>; + avdd-pex-pll-supply = <&vdd_1v05>; + avdd-pll-erefe-supply = <&avdd_1v05>; + dvddio-pex-supply = <&vdd_1v05>; + hvdd-pex-pll-e-supply = <®_3v3>; + hvdd-pex-supply = <®_3v3>; + vddio-pex-ctl-supply = <®_3v3>; + + /* Apalis PCIe (additional lane Apalis type specific) */ + pci@1,0 { + /* PCIE1_RX/TX and TS_DIFF1/2 */ + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>; + phy-names = "pcie-0", "pcie-1"; + }; + + /* I210 Gigabit Ethernet Controller (On-module) */ + pci@2,0 { + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>; + phy-names = "pcie-0"; + status = "okay"; + }; + }; + + host1x@50000000 { + hdmi@54280000 { + pll-supply = <®_1v05_avdd_hdmi_pll>; + vdd-supply = <®_3v3_avdd_hdmi>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + }; + + gpu@0,57000000 { + /* + * Node left disabled on purpose - the bootloader will enable + * it after having set the VPR up + */ + vdd-supply = <&vdd_gpu>; + }; + + pinmux: pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + /* Analogue Audio (On-module) */ + dap3_fs_pp0 { + nvidia,pins = "dap3_fs_pp0"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_din_pp1 { + nvidia,pins = "dap3_din_pp1"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap3_dout_pp2 { + nvidia,pins = "dap3_dout_pp2"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_sclk_pp3 { + nvidia,pins = "dap3_sclk_pp3"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap_mclk1_pw4 { + nvidia,pins = "dap_mclk1_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis BKL1_ON */ + pbb5 { + nvidia,pins = "pbb5"; + nvidia,function = "vgp5"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis BKL1_PWM */ + pu6 { + nvidia,pins = "pu6"; + nvidia,function = "pwm3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis CAM1_MCLK */ + cam_mclk_pcc0 { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi_alt3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis Digital Audio */ + dap2_fs_pa2 { + nvidia,pins = "dap2_fs_pa2"; + nvidia,function = "hda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_sclk_pa3 { + nvidia,pins = "dap2_sclk_pa3"; + nvidia,function = "hda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "hda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5"; + nvidia,function = "hda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb3 { /* DAP1_RESET */ + nvidia,pins = "pbb3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis GPIO */ + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ddc_sda_pv5 { + nvidia,pins = "ddc_sda_pv5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pex_l0_rst_n_pdd1 { + nvidia,pins = "pex_l0_rst_n_pdd1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pex_l0_clkreq_n_pdd2 { + nvidia,pins = "pex_l0_clkreq_n_pdd2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pex_l1_rst_n_pdd5 { + nvidia,pins = "pex_l1_rst_n_pdd5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pex_l1_clkreq_n_pdd6 { + nvidia,pins = "pex_l1_clkreq_n_pdd6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dp_hpd_pff0 { + nvidia,pins = "dp_hpd_pff0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pff2 { + nvidia,pins = "pff2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + owr { /* PEX_L1_CLKREQ_N multiplexed GPIO6 */ + nvidia,pins = "owr"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis HDMI1_CEC */ + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis HDMI1_HPD */ + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis I2C1 */ + gen1_i2c_scl_pc4 { + nvidia,pins = "gen1_i2c_scl_pc4"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gen1_i2c_sda_pc5 { + nvidia,pins = "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis I2C2 (DDC) */ + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gen2_i2c_sda_pt6 { + nvidia,pins = "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis I2C3 (CAM) */ + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + cam_i2c_sda_pbb2 { + nvidia,pins = "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis MMC1 */ + sdmmc1_cd_n_pv3 { /* CD# GPIO */ + nvidia,pins = "sdmmc1_wp_n_pv3"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk2_out_pw5 { /* D5 GPIO */ + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat3_py4 { + nvidia,pins = "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat2_py5 { + nvidia,pins = "sdmmc1_dat2_py5"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat1_py6 { + nvidia,pins = "sdmmc1_dat1_py6"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat0_py7 { + nvidia,pins = "sdmmc1_dat0_py7"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk2_req_pcc5 { /* D4 GPIO */ + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* + * Don't use MMC1_D6 aka SDMMC3_CLK_LB_IN for now as it + * features some magic properties even though the + * external loopback is disabled and the internal + * loopback used as per SDMMC_VENDOR_MISC_CNTRL_0 + * register's SDMMC_SPARE1 bits being set to 0xfffd + * according to the TRM! + */ + sdmmc3_clk_lb_in_pee5 { /* D6 GPIO */ + nvidia,pins = "sdmmc3_clk_lb_in_pee5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + usb_vbus_en2_pff1 { /* D7 GPIO */ + nvidia,pins = "usb_vbus_en2_pff1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis PWM */ + ph0 { + nvidia,pins = "ph0"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph1 { + nvidia,pins = "ph1"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph2 { + nvidia,pins = "ph2"; + nvidia,function = "pwm2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* PWM3 active on pu6 being Apalis BKL1_PWM */ + ph3 { + nvidia,pins = "ph3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis SATA1_ACT# */ + dap1_dout_pn2 { + nvidia,pins = "dap1_dout_pn2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis SD1 */ + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat3_pb4 { + nvidia,pins = "sdmmc3_dat3_pb4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat2_pb5 { + nvidia,pins = "sdmmc3_dat2_pb5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat1_pb6 { + nvidia,pins = "sdmmc3_dat1_pb6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat0_pb7 { + nvidia,pins = "sdmmc3_dat0_pb7"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* + * Don't use SD1_CD# aka SDMMC3_CLK_LB_OUT for now as it + * features some magic properties even though the + * external loopback is disabled and the internal + * loopback used as per SDMMC_VENDOR_MISC_CNTRL_0 + * register's SDMMC_SPARE1 bits being set to 0xfffd + * according to the TRM! + */ + sdmmc3_clk_lb_out_pee4 { /* CD# GPIO */ + nvidia,pins = "sdmmc3_clk_lb_out_pee4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis SPDIF */ + spdif_out_pk5 { + nvidia,pins = "spdif_out_pk5"; + nvidia,function = "spdif"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spdif_in_pk6 { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "spdif"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis SPI1 */ + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_nxt_py2 { + nvidia,pins = "ulpi_nxt_py2"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_stp_py3 { + nvidia,pins = "ulpi_stp_py3"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis SPI2 */ + pg5 { + nvidia,pins = "pg5"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg6 { + nvidia,pins = "pg6"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg7 { + nvidia,pins = "pg7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pi3 { + nvidia,pins = "pi3"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis UART1 */ + pb1 { /* DCD GPIO */ + nvidia,pins = "pb1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pk7 { /* RI GPIO */ + nvidia,pins = "pk7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart1_txd_pu0 { + nvidia,pins = "pu0"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart1_rxd_pu1 { + nvidia,pins = "pu1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart1_cts_n_pu2 { + nvidia,pins = "pu2"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart1_rts_n_pu3 { + nvidia,pins = "pu3"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart3_cts_n_pa1 { /* DSR GPIO */ + nvidia,pins = "uart3_cts_n_pa1"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart3_rts_n_pc0 { /* DTR GPIO */ + nvidia,pins = "uart3_rts_n_pc0"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis UART2 */ + uart2_txd_pc2 { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart2_cts_n_pj5 { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart2_rts_n_pj6 { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis UART3 */ + uart3_txd_pw6 { + nvidia,pins = "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart3_rxd_pw7 { + nvidia,pins = "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis UART4 */ + uart4_rxd_pb0 { + nvidia,pins = "pb0"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart4_txd_pj7 { + nvidia,pins = "pj7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis USBH_EN */ + usb_vbus_en1_pn5 { + nvidia,pins = "usb_vbus_en1_pn5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis USBH_OC# */ + pbb0 { + nvidia,pins = "pbb0"; + nvidia,function = "vgp6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis USBO1_EN */ + usb_vbus_en0_pn4 { + nvidia,pins = "usb_vbus_en0_pn4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis USBO1_OC# */ + pbb4 { + nvidia,pins = "pbb4"; + nvidia,function = "vgp4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis WAKE1_MICO */ + pex_wake_n_pdd3 { + nvidia,pins = "pex_wake_n_pdd3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* CORE_PWR_REQ */ + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* CPU_PWR_REQ */ + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* DVFS */ + dvfs_pwm_px0 { + nvidia,pins = "dvfs_pwm_px0"; + nvidia,function = "cldvfs"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dvfs_clk_px2 { + nvidia,pins = "dvfs_clk_px2"; + nvidia,function = "cldvfs"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* eMMC */ + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat1_paa1 { + nvidia,pins = "sdmmc4_dat1_paa1"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat2_paa2 { + nvidia,pins = "sdmmc4_dat2_paa2"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat3_paa3 { + nvidia,pins = "sdmmc4_dat3_paa3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat4_paa4 { + nvidia,pins = "sdmmc4_dat4_paa4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat5_paa5 { + nvidia,pins = "sdmmc4_dat5_paa5"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat6_paa6 { + nvidia,pins = "sdmmc4_dat6_paa6"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat7_paa7 { + nvidia,pins = "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* JTAG_RTCK */ + jtag_rtck { + nvidia,pins = "jtag_rtck"; + nvidia,function = "rtck"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* LAN_DEV_OFF# */ + ulpi_data5_po6 { + nvidia,pins = "ulpi_data5_po6"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* LAN_RESET# */ + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* LAN_WAKE# */ + ulpi_data4_po5 { + nvidia,pins = "ulpi_data4_po5"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* MCU_INT1# */ + pk2 { + nvidia,pins = "pk2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* MCU_INT2# */ + pj2 { + nvidia,pins = "pj2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* MCU_INT3# */ + pi5 { + nvidia,pins = "pi5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* MCU_INT4# */ + pj0 { + nvidia,pins = "pj0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* MCU_RESET */ + pbb6 { + nvidia,pins = "pbb6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* MCU SPI */ + gpio_x4_aud_px4 { + nvidia,pins = "gpio_x4_aud_px4"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x5_aud_px5 { + nvidia,pins = "gpio_x5_aud_px5"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x6_aud_px6 { /* MCU_CS */ + nvidia,pins = "gpio_x6_aud_px6"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x7_aud_px7 { + nvidia,pins = "gpio_x7_aud_px7"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_w2_aud_pw2 { /* MCU_CSEZP */ + nvidia,pins = "gpio_w2_aud_pw2"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* PMIC_CLK_32K */ + clk_32k_in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "clk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* PMIC_CPU_OC_INT */ + clk_32k_out_pa0 { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* PWR_I2C */ + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pwr_i2c_sda_pz7 { + nvidia,pins = "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* PWR_INT_N */ + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* RESET_MOCI_CTRL */ + pu4 { + nvidia,pins = "pu4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* RESET_OUT_N */ + reset_out_n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* SHIFT_CTRL_DIR_IN */ + kb_row0_pr0 { + nvidia,pins = "kb_row0_pr0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row1_pr1 { + nvidia,pins = "kb_row1_pr1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Configure level-shifter as output for HDA */ + kb_row11_ps3 { + nvidia,pins = "kb_row11_ps3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* SHIFT_CTRL_DIR_OUT */ + kb_col5_pq5 { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col6_pq6 { + nvidia,pins = "kb_col6_pq6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col7_pq7 { + nvidia,pins = "kb_col7_pq7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* SHIFT_CTRL_OE */ + kb_col0_pq0 { + nvidia,pins = "kb_col0_pq0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col1_pq1 { + nvidia,pins = "kb_col1_pq1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col2_pq2 { + nvidia,pins = "kb_col2_pq2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col4_pq4 { + nvidia,pins = "kb_col4_pq4"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row2_pr2 { + nvidia,pins = "kb_row2_pr2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* GPIO_PI6 aka TEMP_ALERT_L */ + pi6 { + nvidia,pins = "pi6"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* TOUCH_INT */ + gpio_w3_aud_pw3 { + nvidia,pins = "gpio_w3_aud_pw3"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + pc7 { /* NC */ + nvidia,pins = "pc7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg0 { /* NC */ + nvidia,pins = "pg0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg1 { /* NC */ + nvidia,pins = "pg1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg2 { /* NC */ + nvidia,pins = "pg2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg3 { /* NC */ + nvidia,pins = "pg3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg4 { /* NC */ + nvidia,pins = "pg4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph4 { /* NC */ + nvidia,pins = "ph4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph5 { /* NC */ + nvidia,pins = "ph5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph6 { /* NC */ + nvidia,pins = "ph6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph7 { /* NC */ + nvidia,pins = "ph7"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi0 { /* NC */ + nvidia,pins = "pi0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi1 { /* NC */ + nvidia,pins = "pi1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi2 { /* NC */ + nvidia,pins = "pi2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi4 { /* NC */ + nvidia,pins = "pi4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi7 { /* NC */ + nvidia,pins = "pi7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk0 { /* NC */ + nvidia,pins = "pk0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk1 { /* NC */ + nvidia,pins = "pk1"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk3 { /* NC */ + nvidia,pins = "pk3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk4 { /* NC */ + nvidia,pins = "pk4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_fs_pn0 { /* NC */ + nvidia,pins = "dap1_fs_pn0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_din_pn1 { /* NC */ + nvidia,pins = "dap1_din_pn1"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_sclk_pn3 { /* NC */ + nvidia,pins = "dap1_sclk_pn3"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data7_po0 { /* NC */ + nvidia,pins = "ulpi_data7_po0"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data0_po1 { /* NC */ + nvidia,pins = "ulpi_data0_po1"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data1_po2 { /* NC */ + nvidia,pins = "ulpi_data1_po2"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data2_po3 { /* NC */ + nvidia,pins = "ulpi_data2_po3"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data3_po4 { /* NC */ + nvidia,pins = "ulpi_data3_po4"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data6_po7 { /* NC */ + nvidia,pins = "ulpi_data6_po7"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap4_fs_pp4 { /* NC */ + nvidia,pins = "dap4_fs_pp4"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap4_din_pp5 { /* NC */ + nvidia,pins = "dap4_din_pp5"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap4_dout_pp6 { /* NC */ + nvidia,pins = "dap4_dout_pp6"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap4_sclk_pp7 { /* NC */ + nvidia,pins = "dap4_sclk_pp7"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col3_pq3 { /* NC */ + nvidia,pins = "kb_col3_pq3"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row3_pr3 { /* NC */ + nvidia,pins = "kb_row3_pr3"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row4_pr4 { /* NC */ + nvidia,pins = "kb_row4_pr4"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row5_pr5 { /* NC */ + nvidia,pins = "kb_row5_pr5"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row6_pr6 { /* NC */ + nvidia,pins = "kb_row6_pr6"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row7_pr7 { /* NC */ + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row8_ps0 { /* NC */ + nvidia,pins = "kb_row8_ps0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row9_ps1 { /* NC */ + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row12_ps4 { /* NC */ + nvidia,pins = "kb_row12_ps4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row13_ps5 { /* NC */ + nvidia,pins = "kb_row13_ps5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row14_ps6 { /* NC */ + nvidia,pins = "kb_row14_ps6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row15_ps7 { /* NC */ + nvidia,pins = "kb_row15_ps7"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row16_pt0 { /* NC */ + nvidia,pins = "kb_row16_pt0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row17_pt1 { /* NC */ + nvidia,pins = "kb_row17_pt1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu5 { /* NC */ + nvidia,pins = "pu5"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pv0 { /* NC */ + nvidia,pins = "pv0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pv1 { /* NC */ + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_cd_n_pv2 { /* NC */ + nvidia,pins = "sdmmc3_cd_n_pv2"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x1_aud_px1 { /* NC */ + nvidia,pins = "gpio_x1_aud_px1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x3_aud_px3 { /* NC */ + nvidia,pins = "gpio_x3_aud_px3"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb7 { /* NC */ + nvidia,pins = "pbb7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pcc1 { /* NC */ + nvidia,pins = "pcc1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pcc2 { /* NC */ + nvidia,pins = "pcc2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk3_req_pee1 { /* NC */ + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap_mclk1_req_pee2 { /* NC */ + nvidia,pins = "dap_mclk1_req_pee2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + }; + }; + + serial@70006040 { + compatible = "nvidia,tegra124-hsuart"; + }; + + serial@70006200 { + compatible = "nvidia,tegra124-hsuart"; + }; + + serial@70006300 { + compatible = "nvidia,tegra124-hsuart"; + }; + + hdmi_ddc: i2c@7000c400 { + clock-frequency = <100000>; + }; + + /* PWR_I2C: power I2C to audio codec, PMIC and temperature sensor */ + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + /* SGTL5000 audio codec */ + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_3v3>; + VDDIO-supply = <&vddio_1v8>; + clocks = <&tegra_car TEGRA124_CLK_EXTERN1>; + }; + + pmic: pmic@40 { + compatible = "ams,as3722"; + reg = <0x40>; + interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + + ams,system-power-controller; + + #interrupt-cells = <2>; + interrupt-controller; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&as3722_default>; + + as3722_default: pinmux { + gpio2_7 { + pins = "gpio2", /* PWR_EN_+V3.3 */ + "gpio7"; /* +V1.6_LPO */ + function = "gpio"; + bias-pull-up; + }; + + gpio1_3_4_5_6 { + pins = "gpio1", "gpio3", "gpio4", + "gpio5", "gpio6"; + bias-high-impedance; + }; + }; + + regulators { + vsup-sd2-supply = <®_3v3>; + vsup-sd3-supply = <®_3v3>; + vsup-sd4-supply = <®_3v3>; + vsup-sd5-supply = <®_3v3>; + vin-ldo0-supply = <&vddio_ddr_1v35>; + vin-ldo1-6-supply = <®_3v3>; + vin-ldo2-5-7-supply = <&vddio_1v8>; + vin-ldo3-4-supply = <®_3v3>; + vin-ldo9-10-supply = <®_3v3>; + vin-ldo11-supply = <®_3v3>; + + vdd_cpu: sd0 { + regulator-name = "+VDD_CPU_AP"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-always-on; + regulator-boot-on; + ams,ext-control = <2>; + }; + + sd1 { + regulator-name = "+VDD_CORE"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-min-microamp = <2500000>; + regulator-max-microamp = <4000000>; + regulator-always-on; + regulator-boot-on; + ams,ext-control = <1>; + }; + + vddio_ddr_1v35: sd2 { + regulator-name = + "+V1.35_VDDIO_DDR(sd2)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + sd3 { + regulator-name = + "+V1.35_VDDIO_DDR(sd3)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v05: sd4 { + regulator-name = "+V1.05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + vddio_1v8: sd5 { + regulator-name = "+V1.8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_gpu: sd6 { + regulator-name = "+VDD_GPU_AP"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <1200000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-boot-on; + regulator-always-on; + }; + + avdd_1v05: ldo0 { + regulator-name = "+V1.05_AVDD"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-boot-on; + regulator-always-on; + ams,ext-control = <1>; + }; + + vddio_sdmmc1: ldo1 { + regulator-name = "VDDIO_SDMMC1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2 { + regulator-name = "+V1.2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3 { + regulator-name = "+V1.05_RTC"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + ams,enable-tracking; + }; + + /* 1.8V for LVDS, 3.3V for eDP */ + ldo4 { + regulator-name = "AVDD_LVDS0_PLL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + /* LDO5 not used */ + + vddio_sdmmc3: ldo6 { + regulator-name = "VDDIO_SDMMC3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + /* LDO7 not used */ + + ldo9 { + regulator-name = "+V3.3_ETH(ldo9)"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo10 { + regulator-name = "+V3.3_ETH(ldo10)"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo11 { + regulator-name = "+V1.8_VPP_FUSE"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; + + /* + * TMP451 temperature sensor + * Note: THERM_N directly connected to AS3722 PMIC THERM + */ + temperature-sensor@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + + #thermal-sensor-cells = <1>; + }; + }; + + /* SPI2: MCU SPI */ + spi@7000d600 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <500>; + nvidia,cpu-pwr-off-time = <300>; + nvidia,core-pwr-good-time = <641 3845>; + nvidia,core-pwr-off-time = <61036>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + + /* Set power_off bit in ResetControl register of AS3722 PMIC */ + i2c-thermtrip { + nvidia,i2c-controller-id = <4>; + nvidia,bus-addr = <0x40>; + nvidia,reg-addr = <0x36>; + nvidia,reg-data = <0x2>; + }; + }; + + sata@70020000 { + phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>; + phy-names = "sata-0"; + + avdd-supply = <&vdd_1v05>; + hvdd-supply = <®_3v3>; + vddio-supply = <&vdd_1v05>; + }; + + usb@70090000 { + /* USBO1, USBO1 (SS), USBH2, USBH4 and USBH4 (SS) */ + phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>, + <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, + <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; + phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0"; + + avddio-pex-supply = <&vdd_1v05>; + avdd-pll-erefe-supply = <&avdd_1v05>; + avdd-pll-utmip-supply = <&vddio_1v8>; + avdd-usb-ss-pll-supply = <&vdd_1v05>; + avdd-usb-supply = <®_3v3>; + dvddio-pex-supply = <&vdd_1v05>; + hvdd-usb-ss-pll-e-supply = <®_3v3>; + hvdd-usb-ss-supply = <®_3v3>; + }; + + padctl@7009f000 { + pads { + usb2 { + status = "okay"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + + pcie { + status = "okay"; + + lanes { + pcie-0 { + nvidia,function = "usb3-ss"; + status = "okay"; + }; + + pcie-1 { + nvidia,function = "usb3-ss"; + status = "okay"; + }; + + pcie-2 { + nvidia,function = "pcie"; + status = "okay"; + }; + + pcie-3 { + nvidia,function = "pcie"; + status = "okay"; + }; + + pcie-4 { + nvidia,function = "pcie"; + status = "okay"; + }; + }; + }; + + sata { + status = "okay"; + + lanes { + sata-0 { + nvidia,function = "sata"; + status = "okay"; + }; + }; + }; + }; + + ports { + /* USBO1 */ + usb2-0 { + status = "okay"; + mode = "otg"; + + vbus-supply = <®_usbo1_vbus>; + }; + + /* USBH2 */ + usb2-1 { + status = "okay"; + mode = "host"; + + vbus-supply = <®_usbh_vbus>; + }; + + /* USBH4 */ + usb2-2 { + status = "okay"; + mode = "host"; + + vbus-supply = <®_usbh_vbus>; + }; + + usb3-0 { + nvidia,usb2-companion = <2>; + status = "okay"; + }; + + usb3-1 { + nvidia,usb2-companion = <0>; + status = "okay"; + }; + }; + }; + + /* eMMC */ + sdhci@700b0600 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + /* CPU DFLL clock */ + clock@70110000 { + status = "okay"; + vdd-cpu-supply = <&vdd_cpu>; + nvidia,i2c-fs-rate = <400000>; + }; + + ahub@70300000 { + i2s@70301200 { + status = "okay"; + }; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + cpus { + cpu@0 { + vdd-cpu-supply = <&vdd_cpu>; + }; + }; + + reg_1v05_avdd_hdmi_pll: regulator-1v05-avdd-hdmi-pll { + compatible = "regulator-fixed"; + regulator-name = "+V1.05_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; + vin-supply = <&vdd_1v05>; + }; + + reg_3v3_mxm: regulator-3v3-mxm { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_MXM"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + /* PWR_EN_+V3.3 */ + gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_3v3_mxm>; + }; + + reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_AVDD_HDMI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_1v05>; + }; + + sound { + compatible = "toradex,tegra-audio-sgtl5000-apalis_tk1", + "nvidia,tegra-audio-sgtl5000"; + nvidia,model = "Toradex Apalis TK1"; + nvidia,audio-routing = + "Headphone Jack", "HP_OUT", + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack"; + nvidia,i2s-controller = <&tegra_i2s2>; + nvidia,audio-codec = <&sgtl5000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_A>, + <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + }; + + thermal-zones { + cpu { + trips { + trip@0 { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + /* + * There are currently no cooling maps because + * there are no cooling devices + */ + }; + }; + + mem { + trips { + trip@0 { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + /* + * There are currently no cooling maps because + * there are no cooling devices + */ + }; + }; + + gpu { + trips { + trip@0 { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + /* + * There are currently no cooling maps because + * there are no cooling devices + */ + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi index 2c5cede686dc..accb7055165a 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi +++ b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi @@ -1,5 +1,5 @@ / { - clock@0,60006000 { + clock@60006000 { emc-timings-3 { nvidia,ram-code = <3>; @@ -78,7 +78,7 @@ }; }; - emc@0,7001b000 { + emc@7001b000 { emc-timings-3 { nvidia,ram-code = <3>; @@ -2101,7 +2101,7 @@ }; }; - memory-controller@0,70019000 { + memory-controller@70019000 { emc-timings-3 { nvidia,ram-code = <3>; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 941f36263c8f..e52b82449a79 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -10,8 +10,8 @@ compatible = "nvidia,jetson-tk1", "nvidia,tegra124"; aliases { - rtc0 = "/i2c@0,7000d000/pmic@40"; - rtc1 = "/rtc@0,7000e000"; + rtc0 = "/i2c@7000d000/pmic@40"; + rtc1 = "/rtc@7000e000"; /* This order keeps the mapping DB9 connector <-> ttyS0 */ serial0 = &uartd; @@ -27,7 +27,7 @@ reg = <0x0 0x80000000 0x0 0x80000000>; }; - pcie-controller@0,01003000 { + pcie-controller@01003000 { status = "okay"; avddio-pex-supply = <&vdd_1v05_run>; @@ -40,21 +40,21 @@ /* Mini PCIe */ pci@1,0 { - phys = <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-4}>; + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>; phy-names = "pcie-0"; status = "okay"; }; /* Gigabit Ethernet */ pci@2,0 { - phys = <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-2}>; + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>; phy-names = "pcie-0"; status = "okay"; }; }; - host1x@0,50000000 { - hdmi@0,54280000 { + host1x@50000000 { + hdmi@54280000 { status = "okay"; hdmi-supply = <&vdd_5v0_hdmi>; @@ -75,7 +75,7 @@ vdd-supply = <&vdd_gpu>; }; - pinmux: pinmux@0,70000868 { + pinmux: pinmux@70000868 { pinctrl-names = "boot"; pinctrl-0 = <&state_boot>; @@ -1356,14 +1356,6 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - owr { - nvidia,pins = "owr"; - nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; - nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; - }; clk_32k_in { nvidia,pins = "clk_32k_in"; nvidia,function = "clk"; @@ -1378,6 +1370,10 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; + dsi_b { + nvidia,pins = "mipi_pad_ctrl_dsi_b"; + nvidia,function = "dsi_b"; + }; }; }; @@ -1404,12 +1400,12 @@ }; /* DB9 serial port */ - serial@0,70006300 { + serial@70006300 { status = "okay"; }; /* Expansion GEN1_I2C_*, mini-PCIe I2C, on-board components */ - i2c@0,7000c000 { + i2c@7000c000 { status = "okay"; clock-frequency = <100000>; @@ -1437,25 +1433,25 @@ }; /* Expansion GEN2_I2C_* */ - i2c@0,7000c400 { + i2c@7000c400 { status = "okay"; clock-frequency = <100000>; }; /* Expansion CAM_I2C_* */ - i2c@0,7000c500 { + i2c@7000c500 { status = "okay"; clock-frequency = <100000>; }; /* HDMI DDC */ - hdmi_ddc: i2c@0,7000c700 { + hdmi_ddc: i2c@7000c700 { status = "okay"; clock-frequency = <100000>; }; /* Expansion PWR_I2C_*, on-board components */ - i2c@0,7000d000 { + i2c@7000d000 { status = "okay"; clock-frequency = <400000>; @@ -1646,12 +1642,12 @@ }; /* Expansion TS_SPI_* */ - spi@0,7000d400 { + spi@7000d400 { status = "okay"; }; /* Internal SPI */ - spi@0,7000da00 { + spi@7000da00 { status = "okay"; spi-max-frequency = <25000000>; spi-flash@0 { @@ -1661,7 +1657,7 @@ }; }; - pmc@0,7000e400 { + pmc@7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <500>; @@ -1680,10 +1676,10 @@ }; /* Serial ATA */ - sata@0,70020000 { + sata@70020000 { status = "okay"; - phys = <&{/padctl@0,7009f000/pads/sata/lanes/sata-0}>; + phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>; phy-names = "sata-0"; hvdd-supply = <&vdd_3v3_lp0>; @@ -1694,15 +1690,15 @@ target-12v-supply = <&vdd_12v0_sata>; }; - hda@0,70030000 { + hda@70030000 { status = "okay"; }; - usb@0,70090000 { - phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-0}>, /* Micro A/B */ - <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* Mini PCIe */ - <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* USB3 */ - <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>; /* USB3 */ + usb@70090000 { + phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* Micro A/B */ + <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Mini PCIe */ + <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* USB3 */ + <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; /* USB3 */ phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0"; avddio-pex-supply = <&vdd_1v05_run>; @@ -1717,7 +1713,7 @@ status = "okay"; }; - padctl@0,7009f000 { + padctl@7009f000 { status = "okay"; pads { @@ -1804,7 +1800,7 @@ }; /* SD card */ - sdhci@0,700b0400 { + sdhci@700b0400 { status = "okay"; cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; @@ -1814,40 +1810,40 @@ }; /* eMMC */ - sdhci@0,700b0600 { + sdhci@700b0600 { status = "okay"; bus-width = <8>; non-removable; }; /* CPU DFLL clock */ - clock@0,70110000 { + clock@70110000 { status = "okay"; vdd-cpu-supply = <&vdd_cpu>; nvidia,i2c-fs-rate = <400000>; }; - ahub@0,70300000 { - i2s@0,70301100 { + ahub@70300000 { + i2s@70301100 { status = "okay"; }; }; /* mini-PCIe USB */ - usb@0,7d004000 { + usb@7d004000 { status = "okay"; }; - usb-phy@0,7d004000 { + usb-phy@7d004000 { status = "okay"; }; /* USB A connector */ - usb@0,7d008000 { + usb@7d008000 { status = "okay"; }; - usb-phy@0,7d008000 { + usb-phy@7d008000 { status = "okay"; vbus-supply = <&vdd_usb3_vbus>; }; @@ -2049,7 +2045,7 @@ thermal-zones { cpu { trips { - trip@0 { + trip { temperature = <101000>; hysteresis = <0>; type = "critical"; @@ -2063,7 +2059,7 @@ mem { trips { - trip@0 { + trip { temperature = <101000>; hysteresis = <0>; type = "critical"; @@ -2077,7 +2073,7 @@ gpu { trips { - trip@0 { + trip { temperature = <101000>; hysteresis = <0>; type = "critical"; diff --git a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi index 1a5748d05dda..4458e86b2769 100644 --- a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi @@ -1,5 +1,5 @@ / { - clock@0,60006000 { + clock@60006000 { emc-timings-1 { nvidia,ram-code = <1>; @@ -67,7 +67,7 @@ }; }; - emc@0,7001b000 { + emc@7001b000 { emc-timings-1 { nvidia,ram-code = <1>; @@ -1754,7 +1754,7 @@ }; }; - memory-controller@0,70019000 { + memory-controller@70019000 { emc-timings-1 { nvidia,ram-code = <1>; diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts index 2d21253ea4e3..67d7cfb32541 100644 --- a/arch/arm/boot/dts/tegra124-nyan-big.dts +++ b/arch/arm/boot/dts/tegra124-nyan-big.dts @@ -15,7 +15,7 @@ ddc-i2c-bus = <&dpaux>; }; - sdhci@0,700b0400 { /* SD Card on this bus */ + sdhci@700b0400 { /* SD Card on this bus */ wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; }; @@ -26,7 +26,7 @@ nvidia,model = "GoogleNyanBig"; }; - pinmux@0,70000868 { + pinmux@70000868 { pinctrl-names = "default"; pinctrl-0 = <&pinmux_default>; diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi index 9ecd108f56cf..4e7b59e25728 100644 --- a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi @@ -1,5 +1,5 @@ / { - clock@0,60006000 { + clock@60006000 { emc-timings-1 { nvidia,ram-code = <1>; @@ -67,7 +67,7 @@ }; }; - emc@0,7001b000 { + emc@7001b000 { emc-timings-1 { nvidia,ram-code = <1>; @@ -1754,7 +1754,7 @@ }; }; - memory-controller@0,70019000 { + memory-controller@70019000 { emc-timings-1 { nvidia,ram-code = <1>; diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze.dts b/arch/arm/boot/dts/tegra124-nyan-blaze.dts index 0d30c514ffad..c9582361c26e 100644 --- a/arch/arm/boot/dts/tegra124-nyan-blaze.dts +++ b/arch/arm/boot/dts/tegra124-nyan-blaze.dts @@ -22,7 +22,7 @@ nvidia,model = "GoogleNyanBlaze"; }; - pinmux@0,70000868 { + pinmux@70000868 { pinctrl-names = "default"; pinctrl-0 = <&pinmux_default>; diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index 0710a600cc69..271505e0715f 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -3,8 +3,8 @@ / { aliases { - rtc0 = "/i2c@0,7000d000/pmic@40"; - rtc1 = "/rtc@0,7000e000"; + rtc0 = "/i2c@7000d000/pmic@40"; + rtc1 = "/rtc@7000e000"; serial0 = &uarta; }; @@ -16,8 +16,8 @@ reg = <0x0 0x80000000 0x0 0x80000000>; }; - host1x@0,50000000 { - hdmi@0,54280000 { + host1x@50000000 { + hdmi@54280000 { status = "okay"; vdd-supply = <&vdd_3v3_hdmi>; @@ -29,29 +29,29 @@ <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; }; - sor@0,54540000 { + sor@54540000 { status = "okay"; nvidia,dpaux = <&dpaux>; nvidia,panel = <&panel>; }; - dpaux@0,545c0000 { + dpaux@545c0000 { vdd-supply = <&vdd_3v3_panel>; status = "okay"; }; }; - serial@0,70006000 { + serial@70006000 { /* Debug connector on the bottom of the board near SD card. */ status = "okay"; }; - pwm@0,7000a000 { + pwm@7000a000 { status = "okay"; }; - i2c@0,7000c000 { + i2c@7000c000 { status = "okay"; clock-frequency = <100000>; @@ -72,7 +72,7 @@ }; }; - i2c@0,7000c400 { + i2c@7000c400 { status = "okay"; clock-frequency = <100000>; @@ -85,7 +85,7 @@ }; }; - i2c@0,7000c500 { + i2c@7000c500 { status = "okay"; clock-frequency = <400000>; @@ -95,12 +95,12 @@ }; }; - hdmi_ddc: i2c@0,7000c700 { + hdmi_ddc: i2c@7000c700 { status = "okay"; clock-frequency = <100000>; }; - i2c@0,7000d000 { + i2c@7000d000 { status = "okay"; clock-frequency = <400000>; @@ -301,7 +301,7 @@ }; }; - spi@0,7000d400 { + spi@7000d400 { status = "okay"; cros_ec: cros-ec@0 { @@ -342,7 +342,7 @@ }; }; - spi@0,7000da00 { + spi@7000da00 { status = "okay"; spi-max-frequency = <25000000>; @@ -353,7 +353,7 @@ }; }; - pmc@0,7000e400 { + pmc@7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <0>; nvidia,cpu-pwr-good-time = <500>; @@ -364,16 +364,16 @@ nvidia,sys-clock-req-active-high; }; - hda@0,70030000 { + hda@70030000 { status = "okay"; }; - usb@0,70090000 { - phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */ - <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */ - <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */ - <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */ - <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */ + usb@70090000 { + phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */ + <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */ + <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */ + <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */ + <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */ phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1"; avddio-pex-supply = <&vdd_1v05_run>; @@ -388,7 +388,7 @@ status = "okay"; }; - padctl@0,7009f000 { + padctl@7009f000 { status = "okay"; pads { @@ -467,7 +467,7 @@ reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; }; - sdhci@0,700b0000 { /* WiFi/BT on this bus */ + sdhci@700b0000 { /* WiFi/BT on this bus */ status = "okay"; bus-width = <4>; no-1-8-v; @@ -478,7 +478,7 @@ keep-power-in-suspend; }; - sdhci@0,700b0400 { /* SD Card on this bus */ + sdhci@700b0400 { /* SD Card on this bus */ status = "okay"; cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; @@ -487,7 +487,7 @@ vqmmc-supply = <&vddio_sdmmc3>; }; - sdhci@0,700b0600 { /* eMMC on this bus */ + sdhci@700b0600 { /* eMMC on this bus */ status = "okay"; bus-width = <8>; no-1-8-v; @@ -495,14 +495,14 @@ }; /* CPU DFLL clock */ - clock@0,70110000 { + clock@70110000 { status = "disabled"; vdd-cpu-supply = <&vdd_cpu>; nvidia,i2c-fs-rate = <400000>; }; - ahub@0,70300000 { - i2s@0,70301100 { + ahub@70300000 { + i2s@70301100 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 973446d07182..6e59cec0962b 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -8,8 +8,8 @@ compatible = "nvidia,venice2", "nvidia,tegra124"; aliases { - rtc0 = "/i2c@0,7000d000/pmic@40"; - rtc1 = "/rtc@0,7000e000"; + rtc0 = "/i2c@7000d000/pmic@40"; + rtc1 = "/rtc@7000e000"; serial0 = &uarta; }; @@ -21,8 +21,8 @@ reg = <0x0 0x80000000 0x0 0x80000000>; }; - host1x@0,50000000 { - hdmi@0,54280000 { + host1x@50000000 { + hdmi@54280000 { status = "okay"; vdd-supply = <&vdd_3v3_hdmi>; @@ -34,14 +34,14 @@ <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; }; - sor@0,54540000 { + sor@54540000 { status = "okay"; nvidia,dpaux = <&dpaux>; nvidia,panel = <&panel>; }; - dpaux@0,545c0000 { + dpaux@545c0000 { vdd-supply = <&vdd_3v3_panel>; status = "okay"; }; @@ -55,7 +55,7 @@ vdd-supply = <&vdd_gpu>; }; - pinmux: pinmux@0,70000868 { + pinmux: pinmux@70000868 { pinctrl-names = "boot"; pinctrl-0 = <&pinmux_boot>; @@ -596,15 +596,15 @@ }; }; - serial@0,70006000 { + serial@70006000 { status = "okay"; }; - pwm@0,7000a000 { + pwm@7000a000 { status = "okay"; }; - i2c@0,7000c000 { + i2c@7000c000 { status = "okay"; clock-frequency = <100000>; @@ -616,7 +616,7 @@ }; }; - i2c@0,7000c400 { + i2c@7000c400 { status = "okay"; clock-frequency = <100000>; @@ -629,17 +629,17 @@ }; }; - i2c@0,7000c500 { + i2c@7000c500 { status = "okay"; clock-frequency = <100000>; }; - hdmi_ddc: i2c@0,7000c700 { + hdmi_ddc: i2c@7000c700 { status = "okay"; clock-frequency = <100000>; }; - i2c@0,7000d000 { + i2c@7000d000 { status = "okay"; clock-frequency = <400000>; @@ -834,7 +834,7 @@ }; }; - spi@0,7000d400 { + spi@7000d400 { status = "okay"; cros_ec: cros-ec@0 { @@ -874,7 +874,7 @@ }; }; - spi@0,7000da00 { + spi@7000da00 { status = "okay"; spi-max-frequency = <25000000>; spi-flash@0 { @@ -884,7 +884,7 @@ }; }; - pmc@0,7000e400 { + pmc@7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <500>; @@ -895,16 +895,16 @@ nvidia,sys-clock-req-active-high; }; - hda@0,70030000 { + hda@70030000 { status = "okay"; }; - usb@0,70090000 { - phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */ - <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */ - <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */ - <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */ - <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */ + usb@70090000 { + phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */ + <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */ + <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */ + <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */ + <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */ phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1"; avddio-pex-supply = <&vdd_1v05_run>; @@ -919,7 +919,7 @@ status = "okay"; }; - padctl@0,7009f000 { + padctl@7009f000 { pads { usb2 { status = "okay"; @@ -998,7 +998,7 @@ }; }; - sdhci@0,700b0400 { + sdhci@700b0400 { cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; @@ -1007,41 +1007,41 @@ vqmmc-supply = <&vddio_sdmmc3>; }; - sdhci@0,700b0600 { + sdhci@700b0600 { status = "okay"; bus-width = <8>; non-removable; }; - ahub@0,70300000 { - i2s@0,70301100 { + ahub@70300000 { + i2s@70301100 { status = "okay"; }; }; - usb@0,7d000000 { + usb@7d000000 { status = "okay"; }; - usb-phy@0,7d000000 { + usb-phy@7d000000 { status = "okay"; vbus-supply = <&vdd_usb1_vbus>; }; - usb@0,7d004000 { + usb@7d004000 { status = "okay"; }; - usb-phy@0,7d004000 { + usb-phy@7d004000 { status = "okay"; vbus-supply = <&vdd_run_cam>; }; - usb@0,7d008000 { + usb@7d008000 { status = "okay"; }; - usb-phy@0,7d008000 { + usb-phy@7d008000 { status = "okay"; vbus-supply = <&vdd_usb3_vbus>; }; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index ea4811870de2..ea340f9de448 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -14,7 +14,7 @@ #address-cells = <2>; #size-cells = <2>; - pcie-controller@0,01003000 { + pcie-controller@01003000 { compatible = "nvidia,tegra124-pcie"; device_type = "pci"; reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ @@ -77,7 +77,7 @@ }; }; - host1x@0,50000000 { + host1x@50000000 { compatible = "nvidia,tegra124-host1x", "simple-bus"; reg = <0x0 0x50000000 0x0 0x00034000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */ @@ -91,7 +91,7 @@ ranges = <0 0x54000000 0 0x54000000 0 0x01000000>; - dc@0,54200000 { + dc@54200000 { compatible = "nvidia,tegra124-dc"; reg = <0x0 0x54200000 0x0 0x00040000>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; @@ -106,7 +106,7 @@ nvidia,head = <0>; }; - dc@0,54240000 { + dc@54240000 { compatible = "nvidia,tegra124-dc"; reg = <0x0 0x54240000 0x0 0x00040000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; @@ -121,7 +121,7 @@ nvidia,head = <1>; }; - hdmi@0,54280000 { + hdmi@54280000 { compatible = "nvidia,tegra124-hdmi"; reg = <0x0 0x54280000 0x0 0x00040000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; @@ -133,7 +133,7 @@ status = "disabled"; }; - sor@0,54540000 { + sor@54540000 { compatible = "nvidia,tegra124-sor"; reg = <0x0 0x54540000 0x0 0x00040000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; @@ -147,7 +147,7 @@ status = "disabled"; }; - dpaux: dpaux@0,545c0000 { + dpaux: dpaux@545c0000 { compatible = "nvidia,tegra124-dpaux"; reg = <0x0 0x545c0000 0x0 0x00040000>; interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; @@ -160,7 +160,7 @@ }; }; - gic: interrupt-controller@0,50041000 { + gic: interrupt-controller@50041000 { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -173,6 +173,11 @@ interrupt-parent = <&gic>; }; + /* + * Please keep the following 0, notation in place as a former mainline + * U-Boot version was looking for that particular notation in order to + * perform required fix-ups on that GPU node. + */ gpu@0,57000000 { compatible = "nvidia,gk20a"; reg = <0x0 0x57000000 0x0 0x01000000>, @@ -203,7 +208,7 @@ interrupt-parent = <&gic>; }; - timer@0,60005000 { + timer@60005000 { compatible = "nvidia,tegra124-timer", "nvidia,tegra30-timer", "nvidia,tegra20-timer"; reg = <0x0 0x60005000 0x0 0x400>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, @@ -215,7 +220,7 @@ clocks = <&tegra_car TEGRA124_CLK_TIMER>; }; - tegra_car: clock@0,60006000 { + tegra_car: clock@60006000 { compatible = "nvidia,tegra124-car"; reg = <0x0 0x60006000 0x0 0x1000>; #clock-cells = <1>; @@ -223,12 +228,12 @@ nvidia,external-memory-controller = <&emc>; }; - flow-controller@0,60007000 { + flow-controller@60007000 { compatible = "nvidia,tegra124-flowctrl"; reg = <0x0 0x60007000 0x0 0x1000>; }; - actmon@0,6000c800 { + actmon@6000c800 { compatible = "nvidia,tegra124-actmon"; reg = <0x0 0x6000c800 0x0 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; @@ -239,7 +244,7 @@ reset-names = "actmon"; }; - gpio: gpio@0,6000d000 { + gpio: gpio@6000d000 { compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio"; reg = <0x0 0x6000d000 0x0 0x1000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, @@ -259,7 +264,7 @@ */ }; - apbdma: dma@0,60020000 { + apbdma: dma@60020000 { compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma"; reg = <0x0 0x60020000 0x0 0x1400>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, @@ -300,13 +305,13 @@ #dma-cells = <1>; }; - apbmisc@0,70000800 { + apbmisc@70000800 { compatible = "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc"; reg = <0x0 0x70000800 0x0 0x64>, /* Chip revision */ <0x0 0x7000e864 0x0 0x04>; /* Strapping options */ }; - pinmux: pinmux@0,70000868 { + pinmux: pinmux@70000868 { compatible = "nvidia,tegra124-pinmux"; reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */ <0x0 0x70003000 0x0 0x434>, /* Mux registers */ @@ -321,7 +326,7 @@ * the APB DMA based serial driver, the compatible is * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart". */ - uarta: serial@0,70006000 { + uarta: serial@70006000 { compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; reg = <0x0 0x70006000 0x0 0x40>; reg-shift = <2>; @@ -334,7 +339,7 @@ status = "disabled"; }; - uartb: serial@0,70006040 { + uartb: serial@70006040 { compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; reg = <0x0 0x70006040 0x0 0x40>; reg-shift = <2>; @@ -347,7 +352,7 @@ status = "disabled"; }; - uartc: serial@0,70006200 { + uartc: serial@70006200 { compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; reg = <0x0 0x70006200 0x0 0x40>; reg-shift = <2>; @@ -360,7 +365,7 @@ status = "disabled"; }; - uartd: serial@0,70006300 { + uartd: serial@70006300 { compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; reg = <0x0 0x70006300 0x0 0x40>; reg-shift = <2>; @@ -373,7 +378,7 @@ status = "disabled"; }; - pwm: pwm@0,7000a000 { + pwm: pwm@7000a000 { compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm"; reg = <0x0 0x7000a000 0x0 0x100>; #pwm-cells = <2>; @@ -383,7 +388,7 @@ status = "disabled"; }; - i2c@0,7000c000 { + i2c@7000c000 { compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; reg = <0x0 0x7000c000 0x0 0x100>; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; @@ -398,7 +403,7 @@ status = "disabled"; }; - i2c@0,7000c400 { + i2c@7000c400 { compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; reg = <0x0 0x7000c400 0x0 0x100>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; @@ -413,7 +418,7 @@ status = "disabled"; }; - i2c@0,7000c500 { + i2c@7000c500 { compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; reg = <0x0 0x7000c500 0x0 0x100>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; @@ -428,7 +433,7 @@ status = "disabled"; }; - i2c@0,7000c700 { + i2c@7000c700 { compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; reg = <0x0 0x7000c700 0x0 0x100>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; @@ -443,7 +448,7 @@ status = "disabled"; }; - i2c@0,7000d000 { + i2c@7000d000 { compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; reg = <0x0 0x7000d000 0x0 0x100>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; @@ -458,7 +463,7 @@ status = "disabled"; }; - i2c@0,7000d100 { + i2c@7000d100 { compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; reg = <0x0 0x7000d100 0x0 0x100>; interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; @@ -473,7 +478,7 @@ status = "disabled"; }; - spi@0,7000d400 { + spi@7000d400 { compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000d400 0x0 0x200>; interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; @@ -488,7 +493,7 @@ status = "disabled"; }; - spi@0,7000d600 { + spi@7000d600 { compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000d600 0x0 0x200>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; @@ -503,7 +508,7 @@ status = "disabled"; }; - spi@0,7000d800 { + spi@7000d800 { compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000d800 0x0 0x200>; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; @@ -518,7 +523,7 @@ status = "disabled"; }; - spi@0,7000da00 { + spi@7000da00 { compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000da00 0x0 0x200>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; @@ -533,7 +538,7 @@ status = "disabled"; }; - spi@0,7000dc00 { + spi@7000dc00 { compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000dc00 0x0 0x200>; interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; @@ -548,7 +553,7 @@ status = "disabled"; }; - spi@0,7000de00 { + spi@7000de00 { compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000de00 0x0 0x200>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; @@ -563,21 +568,21 @@ status = "disabled"; }; - rtc@0,7000e000 { + rtc@7000e000 { compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc"; reg = <0x0 0x7000e000 0x0 0x100>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA124_CLK_RTC>; }; - pmc@0,7000e400 { + pmc@7000e400 { compatible = "nvidia,tegra124-pmc"; reg = <0x0 0x7000e400 0x0 0x400>; clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; }; - fuse@0,7000f800 { + fuse@7000f800 { compatible = "nvidia,tegra124-efuse"; reg = <0x0 0x7000f800 0x0 0x400>; clocks = <&tegra_car TEGRA124_CLK_FUSE>; @@ -586,7 +591,7 @@ reset-names = "fuse"; }; - mc: memory-controller@0,70019000 { + mc: memory-controller@70019000 { compatible = "nvidia,tegra124-mc"; reg = <0x0 0x70019000 0x0 0x1000>; clocks = <&tegra_car TEGRA124_CLK_MC>; @@ -597,14 +602,14 @@ #iommu-cells = <1>; }; - emc: emc@0,7001b000 { + emc: emc@7001b000 { compatible = "nvidia,tegra124-emc"; reg = <0x0 0x7001b000 0x0 0x1000>; nvidia,memory-controller = <&mc>; }; - sata@0,70020000 { + sata@70020000 { compatible = "nvidia,tegra124-ahci"; reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */ <0x0 0x70020000 0x0 0x7000>; /* SATA */ @@ -621,7 +626,7 @@ status = "disabled"; }; - hda@0,70030000 { + hda@70030000 { compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda"; reg = <0x0 0x70030000 0x0 0x10000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; @@ -636,7 +641,7 @@ status = "disabled"; }; - usb@0,70090000 { + usb@70090000 { compatible = "nvidia,tegra124-xusb"; reg = <0x0 0x70090000 0x0 0x8000>, <0x0 0x70098000 0x0 0x1000>, @@ -671,7 +676,7 @@ status = "disabled"; }; - padctl: padctl@0,7009f000 { + padctl: padctl@7009f000 { compatible = "nvidia,tegra124-xusb-padctl"; reg = <0x0 0x7009f000 0x0 0x1000>; resets = <&tegra_car 142>; @@ -804,7 +809,7 @@ }; }; - sdhci@0,700b0000 { + sdhci@700b0000 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0000 0x0 0x200>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; @@ -814,7 +819,7 @@ status = "disabled"; }; - sdhci@0,700b0200 { + sdhci@700b0200 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0200 0x0 0x200>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; @@ -824,7 +829,7 @@ status = "disabled"; }; - sdhci@0,700b0400 { + sdhci@700b0400 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0400 0x0 0x200>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; @@ -834,7 +839,7 @@ status = "disabled"; }; - sdhci@0,700b0600 { + sdhci@700b0600 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0600 0x0 0x200>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; @@ -844,7 +849,7 @@ status = "disabled"; }; - soctherm: thermal-sensor@0,700e2000 { + soctherm: thermal-sensor@700e2000 { compatible = "nvidia,tegra124-soctherm"; reg = <0x0 0x700e2000 0x0 0x1000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; @@ -856,7 +861,7 @@ #thermal-sensor-cells = <1>; }; - dfll: clock@0,70110000 { + dfll: clock@70110000 { compatible = "nvidia,tegra124-dfll"; reg = <0 0x70110000 0 0x100>, /* DFLL control */ <0 0x70110000 0 0x100>, /* I2C output control */ @@ -880,7 +885,7 @@ status = "disabled"; }; - ahub@0,70300000 { + ahub@70300000 { compatible = "nvidia,tegra124-ahub"; reg = <0x0 0x70300000 0x0 0x200>, <0x0 0x70300800 0x0 0x800>, @@ -932,7 +937,7 @@ #address-cells = <2>; #size-cells = <2>; - tegra_i2s0: i2s@0,70301000 { + tegra_i2s0: i2s@70301000 { compatible = "nvidia,tegra124-i2s"; reg = <0x0 0x70301000 0x0 0x100>; nvidia,ahub-cif-ids = <4 4>; @@ -942,7 +947,7 @@ status = "disabled"; }; - tegra_i2s1: i2s@0,70301100 { + tegra_i2s1: i2s@70301100 { compatible = "nvidia,tegra124-i2s"; reg = <0x0 0x70301100 0x0 0x100>; nvidia,ahub-cif-ids = <5 5>; @@ -952,7 +957,7 @@ status = "disabled"; }; - tegra_i2s2: i2s@0,70301200 { + tegra_i2s2: i2s@70301200 { compatible = "nvidia,tegra124-i2s"; reg = <0x0 0x70301200 0x0 0x100>; nvidia,ahub-cif-ids = <6 6>; @@ -962,7 +967,7 @@ status = "disabled"; }; - tegra_i2s3: i2s@0,70301300 { + tegra_i2s3: i2s@70301300 { compatible = "nvidia,tegra124-i2s"; reg = <0x0 0x70301300 0x0 0x100>; nvidia,ahub-cif-ids = <7 7>; @@ -972,7 +977,7 @@ status = "disabled"; }; - tegra_i2s4: i2s@0,70301400 { + tegra_i2s4: i2s@70301400 { compatible = "nvidia,tegra124-i2s"; reg = <0x0 0x70301400 0x0 0x100>; nvidia,ahub-cif-ids = <8 8>; @@ -983,7 +988,7 @@ }; }; - usb@0,7d000000 { + usb@7d000000 { compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; reg = <0x0 0x7d000000 0x0 0x4000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; @@ -995,7 +1000,7 @@ status = "disabled"; }; - phy1: usb-phy@0,7d000000 { + phy1: usb-phy@7d000000 { compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x0 0x7d000000 0x0 0x4000>, <0x0 0x7d000000 0x0 0x4000>; @@ -1020,7 +1025,7 @@ status = "disabled"; }; - usb@0,7d004000 { + usb@7d004000 { compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; reg = <0x0 0x7d004000 0x0 0x4000>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; @@ -1032,7 +1037,7 @@ status = "disabled"; }; - phy2: usb-phy@0,7d004000 { + phy2: usb-phy@7d004000 { compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x0 0x7d004000 0x0 0x4000>, <0x0 0x7d000000 0x0 0x4000>; @@ -1056,7 +1061,7 @@ status = "disabled"; }; - usb@0,7d008000 { + usb@7d008000 { compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; reg = <0x0 0x7d008000 0x0 0x4000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; @@ -1068,7 +1073,7 @@ status = "disabled"; }; - phy3: usb-phy@0,7d008000 { + phy3: usb-phy@7d008000 { compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x0 0x7d008000 0x0 0x4000>, <0x0 0x7d000000 0x0 0x4000>; diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index 8e0066ad9628..1242b841f147 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -478,7 +478,7 @@ clk32k_in: clock@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index d2e960cbc001..d4fb4d39ede7 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -646,7 +646,7 @@ clk32k_in: clock@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 33ed2b23026b..4e361a8c167e 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -512,7 +512,7 @@ clk32k_in: clock@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 94b60a710dd8..2017acacc00c 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -798,7 +798,7 @@ clk32k_in: clock@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 025e9e8037da..27d2bbbf1eae 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -508,7 +508,7 @@ clk32k_in: clock@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 4a035f74043a..381747f114a9 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -383,7 +383,7 @@ clk32k_in: clock@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index a28c060a839b..8f0aaabf7e28 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -592,7 +592,7 @@ clk32k_in: clock@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index 073806d07b2b..1e06f854c8b4 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -569,7 +569,7 @@ clk32k_in: clock@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index bf361277fe10..192b95177aac 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -567,7 +567,7 @@ blocks = <0x5>; irq-trigger = <0x1>; - stmpe_touchscreen { + stmpe_touchscreen@0 { compatible = "st,stmpe-ts"; reg = <0>; /* 3.25 MHz ADC clock speed */ @@ -674,13 +674,14 @@ clk32k_in: clk@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; + clk16m: clk@1 { compatible = "fixed-clock"; - reg=<1>; + reg = <1>; #clock-cells = <0>; clock-frequency = <16000000>; clock-output-names = "clk16m"; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index b6da15d823a6..0350002849d5 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -1952,7 +1952,7 @@ clk32k_in: clock@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 4721c1c9c780..f11012bb58cc 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -423,7 +423,7 @@ clk32k_in: clock@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts index 76875c3160fe..a8c0318743b6 100644 --- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts @@ -131,7 +131,7 @@ clocks { clk16m: clk@1 { compatible = "fixed-clock"; - reg=<1>; + reg = <1>; #clock-cells = <0>; clock-frequency = <16000000>; clock-output-names = "clk16m"; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index 2d8c58fd9357..a265534cd314 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -420,7 +420,7 @@ clk32k_in: clk@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tny_a9260_common.dtsi b/arch/arm/boot/dts/tny_a9260_common.dtsi index ce7138c3af1b..f9dc463b9e48 100644 --- a/arch/arm/boot/dts/tny_a9260_common.dtsi +++ b/arch/arm/boot/dts/tny_a9260_common.dtsi @@ -16,15 +16,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts index 3043296345b7..9161cd9889b4 100644 --- a/arch/arm/boot/dts/tny_a9263.dts +++ b/arch/arm/boot/dts/tny_a9263.dts @@ -21,15 +21,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -99,7 +90,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/uniphier-common32.dtsi b/arch/arm/boot/dts/uniphier-common32.dtsi index 61a095598206..03f60ec340b5 100644 --- a/arch/arm/boot/dts/uniphier-common32.dtsi +++ b/arch/arm/boot/dts/uniphier-common32.dtsi @@ -105,6 +105,8 @@ reg = <0x58c00000 0x400>; #address-cells = <2>; #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_system_bus>; }; smpctrl@59800000 { @@ -134,9 +136,13 @@ interrupt-controller; }; - pinctrl: pinctrl@5f801000 { - /* specify compatible in each SoC DTSI */ - reg = <0x5f801000 0xe00>; + soc-glue@5f800000 { + compatible = "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + pinctrl: pinctrl { + /* specify compatible in each SoC DTSI */ + }; }; }; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi index dadd86070c98..debad7ffef05 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi @@ -182,5 +182,5 @@ }; &pinctrl { - compatible = "socionext,ph1-ld4-pinctrl", "syscon"; + compatible = "socionext,uniphier-ld4-pinctrl"; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi index 532115234025..19c107c66bae 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi @@ -63,5 +63,5 @@ * which makes the pinctrl driver unshareable. */ &pinctrl { - compatible = "socionext,ph1-ld6b-pinctrl", "syscon"; + compatible = "socionext,uniphier-ld6b-pinctrl"; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi index 20f3f2ae7fa4..7b9da0852005 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi @@ -200,5 +200,5 @@ }; &pinctrl { - compatible = "socionext,ph1-pro4-pinctrl", "syscon"; + compatible = "socionext,uniphier-pro4-pinctrl"; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi index 24f6f664b269..7e4aa2fde719 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi @@ -194,5 +194,5 @@ }; &pinctrl { - compatible = "socionext,ph1-pro5-pinctrl", "syscon"; + compatible = "socionext,uniphier-pro5-pinctrl"; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi index 6bfd29a05575..467f9d8e9873 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi @@ -181,5 +181,5 @@ }; &pinctrl { - compatible = "socionext,ph1-sld8-pinctrl", "syscon"; + compatible = "socionext,uniphier-sld8-pinctrl"; }; diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi index f2f3fbe2d517..10a711041b4a 100644 --- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi +++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi @@ -78,6 +78,11 @@ function = "nand"; }; + pinctrl_system_bus: system_bus_grp { + groups = "system_bus", "system_bus_cs1"; + function = "system_bus"; + }; + pinctrl_uart0: uart0_grp { groups = "uart0"; function = "uart0"; diff --git a/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts b/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts index bf2619e4d489..98d895b7af1d 100644 --- a/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts +++ b/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts @@ -55,13 +55,13 @@ }; chosen { - stdout-path = "serial2:115200n8"; + stdout-path = "serial0:115200n8"; }; aliases { - serial0 = &serial0; - serial1 = &serial1; - serial2 = &serial2; + serial0 = &serial2; + serial1 = &serial0; + serial2 = &serial1; i2c0 = &i2c0; i2c2 = &i2c2; i2c4 = &i2c4; diff --git a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts b/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts index 498acac3d95d..1fb8bd7bb686 100644 --- a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts +++ b/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts @@ -55,13 +55,13 @@ }; chosen { - stdout-path = "serial2:115200n8"; + stdout-path = "serial0:115200n8"; }; aliases { - serial0 = &serial0; - serial1 = &serial1; - serial2 = &serial2; + serial0 = &serial2; + serial1 = &serial0; + serial2 = &serial1; i2c0 = &i2c0; i2c4 = &i2c4; i2c5 = &i2c5; diff --git a/arch/arm/boot/dts/uniphier-proxstream2.dtsi b/arch/arm/boot/dts/uniphier-proxstream2.dtsi index 4ac484c6ce4e..d00d6f5c2668 100644 --- a/arch/arm/boot/dts/uniphier-proxstream2.dtsi +++ b/arch/arm/boot/dts/uniphier-proxstream2.dtsi @@ -205,5 +205,5 @@ }; &pinctrl { - compatible = "socionext,proxstream2-pinctrl", "syscon"; + compatible = "socionext,uniphier-pxs2-pinctrl"; }; diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi index 9beea8976584..7514b347cdd2 100644 --- a/arch/arm/boot/dts/usb_a9260_common.dtsi +++ b/arch/arm/boot/dts/usb_a9260_common.dtsi @@ -8,15 +8,6 @@ / { clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -90,7 +81,7 @@ }; }; - usb0: ohci@00500000 { + usb0: ohci@500000 { num-ports = <2>; status = "okay"; }; @@ -119,7 +110,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts index 8cc6edb29694..bfc48a272417 100644 --- a/arch/arm/boot/dts/usb_a9263.dts +++ b/arch/arm/boot/dts/usb_a9263.dts @@ -21,15 +21,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -147,7 +138,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/usb_a9g20_common.dtsi b/arch/arm/boot/dts/usb_a9g20_common.dtsi index 0b3b36182fe5..088c2c3685ab 100644 --- a/arch/arm/boot/dts/usb_a9g20_common.dtsi +++ b/arch/arm/boot/dts/usb_a9g20_common.dtsi @@ -11,14 +11,15 @@ / { chosen { - bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; + bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs"; + stdout-path = "serial0:115200n8"; }; memory { reg = <0x20000000 0x4000000>; }; - i2c@0 { + i2c-gpio-0 { rv3029c2@56 { compatible = "rv3029c2"; reg = <0x56>; diff --git a/arch/arm/mach-bcm/platsmp.c b/arch/arm/mach-bcm/platsmp.c index 33c4d8349f95..3ac3a9bc663c 100644 --- a/arch/arm/mach-bcm/platsmp.c +++ b/arch/arm/mach-bcm/platsmp.c @@ -38,9 +38,6 @@ #define OF_SECONDARY_BOOT "secondary-boot-reg" #define MPIDR_CPUID_BITMASK 0x3 -/* I/O address of register used to coordinate secondary core startup */ -static u32 secondary_boot_addr; - /* * Enable the Cortex A9 Snoop Control Unit * @@ -82,20 +79,40 @@ static int __init scu_a9_enable(void) return 0; } -static int nsp_write_lut(void) +static u32 secondary_boot_addr_for(unsigned int cpu) +{ + u32 secondary_boot_addr = 0; + struct device_node *cpu_node = of_get_cpu_node(cpu, NULL); + + if (!cpu_node) { + pr_err("Failed to find device tree node for CPU%u\n", cpu); + return 0; + } + + if (of_property_read_u32(cpu_node, + OF_SECONDARY_BOOT, + &secondary_boot_addr)) + pr_err("required secondary boot register not specified for CPU%u\n", + cpu); + + of_node_put(cpu_node); + + return secondary_boot_addr; +} + +static int nsp_write_lut(unsigned int cpu) { void __iomem *sku_rom_lut; phys_addr_t secondary_startup_phy; + const u32 secondary_boot_addr = secondary_boot_addr_for(cpu); - if (!secondary_boot_addr) { - pr_warn("required secondary boot register not specified\n"); + if (!secondary_boot_addr) return -EINVAL; - } sku_rom_lut = ioremap_nocache((phys_addr_t)secondary_boot_addr, - sizeof(secondary_boot_addr)); + sizeof(phys_addr_t)); if (!sku_rom_lut) { - pr_warn("unable to ioremap SKU-ROM LUT register\n"); + pr_warn("unable to ioremap SKU-ROM LUT register for cpu %u\n", cpu); return -ENOMEM; } @@ -114,70 +131,12 @@ static int nsp_write_lut(void) static void __init bcm_smp_prepare_cpus(unsigned int max_cpus) { - static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 }; - struct device_node *cpus_node = NULL; - struct device_node *cpu_node = NULL; - int ret; - - /* - * This function is only called via smp_ops->smp_prepare_cpu(). - * That only happens if a "/cpus" device tree node exists - * and has an "enable-method" property that selects the SMP - * operations defined herein. - */ - cpus_node = of_find_node_by_path("/cpus"); - if (!cpus_node) - return; - - for_each_child_of_node(cpus_node, cpu_node) { - u32 cpuid; - - if (of_node_cmp(cpu_node->type, "cpu")) - continue; - - if (of_property_read_u32(cpu_node, "reg", &cpuid)) { - pr_debug("%s: missing reg property\n", - cpu_node->full_name); - ret = -ENOENT; - goto out; - } - - /* - * "secondary-boot-reg" property should be defined only - * for secondary cpu - */ - if ((cpuid & MPIDR_CPUID_BITMASK) == 1) { - /* - * Our secondary enable method requires a - * "secondary-boot-reg" property to specify a register - * address used to request the ROM code boot a secondary - * core. If we have any trouble getting this we fall - * back to uniprocessor mode. - */ - if (of_property_read_u32(cpu_node, - OF_SECONDARY_BOOT, - &secondary_boot_addr)) { - pr_warn("%s: no" OF_SECONDARY_BOOT "property\n", - cpu_node->name); - ret = -ENOENT; - goto out; - } - } - } - - /* - * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is - * returned, the SoC reported a uniprocessor configuration. - * We bail on any other error. - */ - ret = scu_a9_enable(); -out: - of_node_put(cpu_node); - of_node_put(cpus_node); + const cpumask_t only_cpu_0 = { CPU_BITS_CPU0 }; - if (ret) { + /* Enable the SCU on Cortex A9 based SoCs */ + if (scu_a9_enable()) { /* Update the CPU present map to reflect uniprocessor mode */ - pr_warn("disabling SMP\n"); + pr_warn("failed to enable A9 SCU - disabling SMP\n"); init_cpu_present(&only_cpu_0); } } @@ -208,6 +167,7 @@ static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle) u32 cpu_id; u32 boot_val; bool timeout = false; + const u32 secondary_boot_addr = secondary_boot_addr_for(cpu); cpu_id = cpu_logical_map(cpu); if (cpu_id & ~BOOT_ADDR_CPUID_MASK) { @@ -215,13 +175,11 @@ static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle) return -EINVAL; } - if (!secondary_boot_addr) { - pr_err("required secondary boot register not specified\n"); + if (!secondary_boot_addr) return -EINVAL; - } - boot_reg = ioremap_nocache( - (phys_addr_t)secondary_boot_addr, sizeof(u32)); + boot_reg = ioremap_nocache((phys_addr_t)secondary_boot_addr, + sizeof(phys_addr_t)); if (!boot_reg) { pr_err("unable to map boot register for cpu %u\n", cpu_id); return -ENOMEM; @@ -315,7 +273,7 @@ static int nsp_boot_secondary(unsigned int cpu, struct task_struct *idle) * After wake up, secondary core branches to the startup * address programmed at SKU ROM LUT location. */ - ret = nsp_write_lut(); + ret = nsp_write_lut(cpu); if (ret) { pr_err("unable to write startup addr to SKU ROM LUT\n"); goto out; @@ -328,12 +286,12 @@ out: return ret; } -static const struct smp_operations bcm_smp_ops __initconst = { +static const struct smp_operations kona_smp_ops __initconst = { .smp_prepare_cpus = bcm_smp_prepare_cpus, .smp_boot_secondary = kona_boot_secondary, }; CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method", - &bcm_smp_ops); + &kona_smp_ops); static const struct smp_operations bcm23550_smp_ops __initconst = { .smp_boot_secondary = bcm23550_boot_secondary, diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c index 7255aa818b1f..e816a7500e43 100644 --- a/drivers/clk/ti/clk-43xx.c +++ b/drivers/clk/ti/clk-43xx.c @@ -58,6 +58,7 @@ static struct ti_dt_clk am43xx_clks[] = { DT_CLK(NULL, "smartreflex1_fck", "smartreflex1_fck"), DT_CLK(NULL, "sha0_fck", "sha0_fck"), DT_CLK(NULL, "aes0_fck", "aes0_fck"), + DT_CLK(NULL, "rng_fck", "rng_fck"), DT_CLK(NULL, "timer1_fck", "timer1_fck"), DT_CLK(NULL, "timer2_fck", "timer2_fck"), DT_CLK(NULL, "timer3_fck", "timer3_fck"), diff --git a/drivers/spi/spi-st-ssc4.c b/drivers/spi/spi-st-ssc4.c index d5adf9f31602..a56eca0e95a6 100644 --- a/drivers/spi/spi-st-ssc4.c +++ b/drivers/spi/spi-st-ssc4.c @@ -68,32 +68,6 @@ struct spi_st { struct completion done; }; -static int spi_st_clk_enable(struct spi_st *spi_st) -{ - /* - * Current platforms use one of the core clocks for SPI and I2C. - * If we attempt to disable the clock, the system will hang. - * - * TODO: Remove this when platform supports power domains. - */ - return 0; - - return clk_prepare_enable(spi_st->clk); -} - -static void spi_st_clk_disable(struct spi_st *spi_st) -{ - /* - * Current platforms use one of the core clocks for SPI and I2C. - * If we attempt to disable the clock, the system will hang. - * - * TODO: Remove this when platform supports power domains. - */ - return; - - clk_disable_unprepare(spi_st->clk); -} - /* Load the TX FIFO */ static void ssc_write_tx_fifo(struct spi_st *spi_st) { @@ -349,7 +323,7 @@ static int spi_st_probe(struct platform_device *pdev) goto put_master; } - ret = spi_st_clk_enable(spi_st); + ret = clk_prepare_enable(spi_st->clk); if (ret) goto put_master; @@ -408,7 +382,7 @@ static int spi_st_probe(struct platform_device *pdev) return 0; clk_disable: - spi_st_clk_disable(spi_st); + clk_disable_unprepare(spi_st->clk); put_master: spi_master_put(master); return ret; @@ -419,7 +393,7 @@ static int spi_st_remove(struct platform_device *pdev) struct spi_master *master = platform_get_drvdata(pdev); struct spi_st *spi_st = spi_master_get_devdata(master); - spi_st_clk_disable(spi_st); + clk_disable_unprepare(spi_st->clk); pinctrl_pm_select_sleep_state(&pdev->dev); @@ -435,7 +409,7 @@ static int spi_st_runtime_suspend(struct device *dev) writel_relaxed(0, spi_st->base + SSC_IEN); pinctrl_pm_select_sleep_state(dev); - spi_st_clk_disable(spi_st); + clk_disable_unprepare(spi_st->clk); return 0; } @@ -446,7 +420,7 @@ static int spi_st_runtime_resume(struct device *dev) struct spi_st *spi_st = spi_master_get_devdata(master); int ret; - ret = spi_st_clk_enable(spi_st); + ret = clk_prepare_enable(spi_st->clk); pinctrl_pm_select_default_state(dev); return ret; diff --git a/include/dt-bindings/clock/r8a7792-clock.h b/include/dt-bindings/clock/r8a7792-clock.h new file mode 100644 index 000000000000..9a8b392ceb00 --- /dev/null +++ b/include/dt-bindings/clock/r8a7792-clock.h @@ -0,0 +1,102 @@ +/* + * Copyright (C) 2016 Cogent Embedded, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __DT_BINDINGS_CLOCK_R8A7792_H__ +#define __DT_BINDINGS_CLOCK_R8A7792_H__ + +/* CPG */ +#define R8A7792_CLK_MAIN 0 +#define R8A7792_CLK_PLL0 1 +#define R8A7792_CLK_PLL1 2 +#define R8A7792_CLK_PLL3 3 +#define R8A7792_CLK_LB 4 +#define R8A7792_CLK_QSPI 5 +#define R8A7792_CLK_Z 6 + +/* MSTP0 */ +#define R8A7792_CLK_MSIOF0 0 + +/* MSTP1 */ +#define R8A7792_CLK_JPU 6 +#define R8A7792_CLK_TMU1 11 +#define R8A7792_CLK_TMU3 21 +#define R8A7792_CLK_TMU2 22 +#define R8A7792_CLK_CMT0 24 +#define R8A7792_CLK_TMU0 25 +#define R8A7792_CLK_VSP1DU1 27 +#define R8A7792_CLK_VSP1DU0 28 +#define R8A7792_CLK_VSP1_SY 31 + +/* MSTP2 */ +#define R8A7792_CLK_MSIOF1 8 +#define R8A7792_CLK_SYS_DMAC1 18 +#define R8A7792_CLK_SYS_DMAC0 19 + +/* MSTP3 */ +#define R8A7792_CLK_TPU0 4 +#define R8A7792_CLK_SDHI0 14 +#define R8A7792_CLK_CMT1 29 + +/* MSTP4 */ +#define R8A7792_CLK_IRQC 7 + +/* MSTP5 */ +#define R8A7792_CLK_AUDIO_DMAC0 2 +#define R8A7792_CLK_THERMAL 22 +#define R8A7792_CLK_PWM 23 + +/* MSTP7 */ +#define R8A7792_CLK_HSCIF1 16 +#define R8A7792_CLK_HSCIF0 17 +#define R8A7792_CLK_SCIF3 18 +#define R8A7792_CLK_SCIF2 19 +#define R8A7792_CLK_SCIF1 20 +#define R8A7792_CLK_SCIF0 21 +#define R8A7792_CLK_DU1 23 +#define R8A7792_CLK_DU0 24 + +/* MSTP8 */ +#define R8A7792_CLK_VIN5 4 +#define R8A7792_CLK_VIN4 5 +#define R8A7792_CLK_VIN3 8 +#define R8A7792_CLK_VIN2 9 +#define R8A7792_CLK_VIN1 10 +#define R8A7792_CLK_VIN0 11 +#define R8A7792_CLK_ETHERAVB 12 + +/* MSTP9 */ +#define R8A7792_CLK_GPIO7 4 +#define R8A7792_CLK_GPIO6 5 +#define R8A7792_CLK_GPIO5 7 +#define R8A7792_CLK_GPIO4 8 +#define R8A7792_CLK_GPIO3 9 +#define R8A7792_CLK_GPIO2 10 +#define R8A7792_CLK_GPIO1 11 +#define R8A7792_CLK_GPIO0 12 +#define R8A7792_CLK_GPIO11 13 +#define R8A7792_CLK_GPIO10 14 +#define R8A7792_CLK_CAN1 15 +#define R8A7792_CLK_CAN0 16 +#define R8A7792_CLK_QSPI_MOD 17 +#define R8A7792_CLK_GPIO9 19 +#define R8A7792_CLK_GPIO8 21 +#define R8A7792_CLK_I2C5 25 +#define R8A7792_CLK_IICDVFS 26 +#define R8A7792_CLK_I2C4 27 +#define R8A7792_CLK_I2C3 28 +#define R8A7792_CLK_I2C2 29 +#define R8A7792_CLK_I2C1 30 +#define R8A7792_CLK_I2C0 31 + +/* MSTP10 */ +#define R8A7792_CLK_SSI_ALL 5 +#define R8A7792_CLK_SSI4 11 +#define R8A7792_CLK_SSI3 12 + +#endif /* __DT_BINDINGS_CLOCK_R8A7792_H__ */ diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h index 4d3ecd626c1f..a3491ba2f6ec 100644 --- a/include/dt-bindings/clock/r8a7794-clock.h +++ b/include/dt-bindings/clock/r8a7794-clock.h @@ -67,7 +67,6 @@ #define R8A7794_CLK_IRQC 7 /* MSTP5 */ -#define R8A7794_CLK_THERMAL 22 #define R8A7794_CLK_PWM 23 /* MSTP7 */ diff --git a/include/dt-bindings/clock/stih407-clks.h b/include/dt-bindings/clock/stih407-clks.h index 7af2b717b3b2..082edd9badfa 100644 --- a/include/dt-bindings/clock/stih407-clks.h +++ b/include/dt-bindings/clock/stih407-clks.h @@ -5,6 +5,10 @@ #ifndef _DT_BINDINGS_CLK_STIH407 #define _DT_BINDINGS_CLK_STIH407 +/* CLOCKGEN A0 */ +#define CLK_IC_LMI0 0 +#define CLK_IC_LMI1 1 + /* CLOCKGEN C0 */ #define CLK_ICN_GPU 0 #define CLK_FDMA 1 diff --git a/include/dt-bindings/pinctrl/keystone.h b/include/dt-bindings/pinctrl/keystone.h new file mode 100644 index 000000000000..7f97d776a8ff --- /dev/null +++ b/include/dt-bindings/pinctrl/keystone.h @@ -0,0 +1,39 @@ +/* + * This header provides constants for Keystone pinctrl bindings. + * + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_PINCTRL_KEYSTONE_H +#define _DT_BINDINGS_PINCTRL_KEYSTONE_H + +#define MUX_MODE0 0 +#define MUX_MODE1 1 +#define MUX_MODE2 2 +#define MUX_MODE3 3 +#define MUX_MODE4 4 +#define MUX_MODE5 5 + +#define BUFFER_CLASS_B (0 << 19) +#define BUFFER_CLASS_C (1 << 19) +#define BUFFER_CLASS_D (2 << 19) +#define BUFFER_CLASS_E (3 << 19) + +#define PULL_DISABLE (1 << 16) +#define PIN_PULLUP (1 << 17) +#define PIN_PULLDOWN (0 << 17) + +#define KEYSTONE_IOPAD_OFFSET(pa, offset) (((pa) & 0xffff) - (offset)) + +#define K2G_CORE_IOPAD(pa) KEYSTONE_IOPAD_OFFSET((pa), 0x1000) + +#endif diff --git a/include/dt-bindings/power/r8a7792-sysc.h b/include/dt-bindings/power/r8a7792-sysc.h new file mode 100644 index 000000000000..74f4a78e29aa --- /dev/null +++ b/include/dt-bindings/power/r8a7792-sysc.h @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2016 Cogent Embedded Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ +#ifndef __DT_BINDINGS_POWER_R8A7792_SYSC_H__ +#define __DT_BINDINGS_POWER_R8A7792_SYSC_H__ + +/* + * These power domain indices match the numbers of the interrupt bits + * representing the power areas in the various Interrupt Registers + * (e.g. SYSCISR, Interrupt Status Register) + */ + +#define R8A7792_PD_CA15_CPU0 0 +#define R8A7792_PD_CA15_CPU1 1 +#define R8A7792_PD_CA15_SCU 12 +#define R8A7792_PD_SGX 20 +#define R8A7792_PD_IMP 24 + +/* Always-on power area */ +#define R8A7792_PD_ALWAYS_ON 32 + +#endif /* __DT_BINDINGS_POWER_R8A7792_SYSC_H__ */ |