diff options
156 files changed, 13214 insertions, 6482 deletions
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index eb154ef36c2a..174eaff7ded9 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -2,19 +2,24 @@ Ext4 Filesystem =============== -This is a development version of the ext4 filesystem, an advanced level -of the ext3 filesystem which incorporates scalability and reliability -enhancements for supporting large filesystems (64 bit) in keeping with -increasing disk capacities and state-of-the-art feature requirements. +Ext4 is an an advanced level of the ext3 filesystem which incorporates +scalability and reliability enhancements for supporting large filesystems +(64 bit) in keeping with increasing disk capacities and state-of-the-art +feature requirements. -Mailing list: linux-ext4@vger.kernel.org +Mailing list: linux-ext4@vger.kernel.org +Web site: http://ext4.wiki.kernel.org 1. Quick usage instructions: =========================== +Note: More extensive information for getting started with ext4 can be + found at the ext4 wiki site at the URL: + http://ext4.wiki.kernel.org/index.php/Ext4_Howto + - Compile and install the latest version of e2fsprogs (as of this - writing version 1.41) from: + writing version 1.41.3) from: http://sourceforge.net/project/showfiles.php?group_id=2406 @@ -36,11 +41,9 @@ Mailing list: linux-ext4@vger.kernel.org # mke2fs -t ext4 /dev/hda1 - Or configure an existing ext3 filesystem to support extents and set - the test_fs flag to indicate that it's ok for an in-development - filesystem to touch this filesystem: + Or to configure an existing ext3 filesystem to support extents: - # tune2fs -O extents -E test_fs /dev/hda1 + # tune2fs -O extents /dev/hda1 If the filesystem was created with 128 byte inodes, it can be converted to use 256 byte for greater efficiency via: @@ -104,8 +107,8 @@ exist yet so I'm not sure they're in the near-term roadmap. The big performance win will come with mballoc, delalloc and flex_bg grouping of bitmaps and inode tables. Some test results available here: - - http://www.bullopensource.org/ext4/20080530/ffsb-write-2.6.26-rc2.html - - http://www.bullopensource.org/ext4/20080530/ffsb-readwrite-2.6.26-rc2.html + - http://www.bullopensource.org/ext4/20080818-ffsb/ffsb-write-2.6.27-rc1.html + - http://www.bullopensource.org/ext4/20080818-ffsb/ffsb-readwrite-2.6.27-rc1.html 3. Options ========== @@ -214,9 +217,6 @@ noreservation bsddf (*) Make 'df' act like BSD. minixdf Make 'df' act like Minix. -check=none Don't do extra checking of bitmaps on mount. -nocheck - debug Extra debugging information is sent to syslog. errors=remount-ro(*) Remount the filesystem read-only on an error. @@ -253,8 +253,6 @@ nobh (a) cache disk block mapping information "nobh" option tries to avoid associating buffer heads (supported only for "writeback" mode). -mballoc (*) Use the multiple block allocator for block allocation -nomballoc disabled multiple block allocator for block allocation. stripe=n Number of filesystem blocks that mballoc will try to use for allocation size and alignment. For RAID5/6 systems this should be the number of data diff --git a/Documentation/video4linux/CARDLIST.au0828 b/Documentation/video4linux/CARDLIST.au0828 index aa05e5bb22fb..d5cb4ea287b2 100644 --- a/Documentation/video4linux/CARDLIST.au0828 +++ b/Documentation/video4linux/CARDLIST.au0828 @@ -1,5 +1,5 @@ 0 -> Unknown board (au0828) - 1 -> Hauppauge HVR950Q (au0828) [2040:7200,2040:7210,2040:7217,2040:721b,2040:721f,2040:7280,0fd9:0008] + 1 -> Hauppauge HVR950Q (au0828) [2040:7200,2040:7210,2040:7217,2040:721b,2040:721e,2040:721f,2040:7280,0fd9:0008] 2 -> Hauppauge HVR850 (au0828) [2040:7240] 3 -> DViCO FusionHDTV USB (au0828) [0fe9:d620] 4 -> Hauppauge HVR950Q rev xxF8 (au0828) [2040:7201,2040:7211,2040:7281] diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner index 30bbdda68d03..691d2f37dc57 100644 --- a/Documentation/video4linux/CARDLIST.tuner +++ b/Documentation/video4linux/CARDLIST.tuner @@ -75,3 +75,4 @@ tuner=73 - Samsung TCPG 6121P30A tuner=75 - Philips TEA5761 FM Radio tuner=76 - Xceive 5000 tuner tuner=77 - TCL tuner MF02GIP-5N-E +tuner=78 - Philips FMD1216MEX MK3 Hybrid Tuner diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c index 165c871ba9af..bcc079c282dd 100644 --- a/arch/x86/mm/highmem_32.c +++ b/arch/x86/mm/highmem_32.c @@ -137,6 +137,7 @@ void *kmap_atomic_pfn(unsigned long pfn, enum km_type type) return (void*) vaddr; } +EXPORT_SYMBOL_GPL(kmap_atomic_pfn); /* temporarily in use by i915 GEM until vmap */ struct page *kmap_atomic_to_page(void *ptr) { diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 610d6fd5bb50..9097500de5f4 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -6,7 +6,7 @@ # menuconfig DRM tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)" - depends on (AGP || AGP=n) && PCI && !EMULATED_CMPXCHG + depends on (AGP || AGP=n) && PCI && !EMULATED_CMPXCHG && SHMEM help Kernel-level support for the Direct Rendering Infrastructure (DRI) introduced in XFree86 4.0. If you say Y here, you need to select @@ -87,6 +87,7 @@ config DRM_MGA config DRM_SIS tristate "SiS video cards" depends on DRM && AGP + depends on FB_SIS || FB_SIS=n help Choose this option if you have a SiS 630 or compatible video chipset. If M is selected the module will be called sis. AGP diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index e9f9a97ae00a..74da99495e21 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -4,8 +4,9 @@ ccflags-y := -Iinclude/drm -drm-y := drm_auth.o drm_bufs.o drm_context.o drm_dma.o drm_drawable.o \ - drm_drv.o drm_fops.o drm_ioctl.o drm_irq.o \ +drm-y := drm_auth.o drm_bufs.o drm_cache.o \ + drm_context.o drm_dma.o drm_drawable.o \ + drm_drv.o drm_fops.o drm_gem.o drm_ioctl.o drm_irq.o \ drm_lock.o drm_memory.o drm_proc.o drm_stub.o drm_vm.o \ drm_agpsupport.o drm_scatter.o ati_pcigart.o drm_pci.o \ drm_sysfs.o drm_hashtab.o drm_sman.o drm_mm.o diff --git a/drivers/gpu/drm/drm_agpsupport.c b/drivers/gpu/drm/drm_agpsupport.c index aefa5ac4c0b1..3d33b8252b58 100644 --- a/drivers/gpu/drm/drm_agpsupport.c +++ b/drivers/gpu/drm/drm_agpsupport.c @@ -33,6 +33,7 @@ #include "drmP.h" #include <linux/module.h> +#include <asm/agp.h> #if __OS_HAS_AGP @@ -452,4 +453,53 @@ int drm_agp_unbind_memory(DRM_AGP_MEM * handle) return agp_unbind_memory(handle); } -#endif /* __OS_HAS_AGP */ +/** + * Binds a collection of pages into AGP memory at the given offset, returning + * the AGP memory structure containing them. + * + * No reference is held on the pages during this time -- it is up to the + * caller to handle that. + */ +DRM_AGP_MEM * +drm_agp_bind_pages(struct drm_device *dev, + struct page **pages, + unsigned long num_pages, + uint32_t gtt_offset, + u32 type) +{ + DRM_AGP_MEM *mem; + int ret, i; + + DRM_DEBUG("\n"); + + mem = drm_agp_allocate_memory(dev->agp->bridge, num_pages, + type); + if (mem == NULL) { + DRM_ERROR("Failed to allocate memory for %ld pages\n", + num_pages); + return NULL; + } + + for (i = 0; i < num_pages; i++) + mem->memory[i] = phys_to_gart(page_to_phys(pages[i])); + mem->page_count = num_pages; + + mem->is_flushed = true; + ret = drm_agp_bind_memory(mem, gtt_offset / PAGE_SIZE); + if (ret != 0) { + DRM_ERROR("Failed to bind AGP memory: %d\n", ret); + agp_free_memory(mem); + return NULL; + } + + return mem; +} +EXPORT_SYMBOL(drm_agp_bind_pages); + +void drm_agp_chipset_flush(struct drm_device *dev) +{ + agp_flush_chipset(dev->agp->bridge); +} +EXPORT_SYMBOL(drm_agp_chipset_flush); + +#endif /* __OS_HAS_AGP */ diff --git a/drivers/gpu/drm/drm_cache.c b/drivers/gpu/drm/drm_cache.c new file mode 100644 index 000000000000..0e994a0e46d4 --- /dev/null +++ b/drivers/gpu/drm/drm_cache.c @@ -0,0 +1,69 @@ +/************************************************************************** + * + * Copyright (c) 2006-2007 Tungsten Graphics, Inc., Cedar Park, TX., USA + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR + * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE + * USE OR OTHER DEALINGS IN THE SOFTWARE. + * + **************************************************************************/ +/* + * Authors: Thomas Hellström <thomas-at-tungstengraphics-dot-com> + */ + +#include "drmP.h" + +#if defined(CONFIG_X86) +static void +drm_clflush_page(struct page *page) +{ + uint8_t *page_virtual; + unsigned int i; + + if (unlikely(page == NULL)) + return; + + page_virtual = kmap_atomic(page, KM_USER0); + for (i = 0; i < PAGE_SIZE; i += boot_cpu_data.x86_clflush_size) + clflush(page_virtual + i); + kunmap_atomic(page_virtual, KM_USER0); +} +#endif + +void +drm_clflush_pages(struct page *pages[], unsigned long num_pages) +{ + +#if defined(CONFIG_X86) + if (cpu_has_clflush) { + unsigned long i; + + mb(); + for (i = 0; i < num_pages; ++i) + drm_clflush_page(*pages++); + mb(); + + return; + } + + wbinvd(); +#endif +} +EXPORT_SYMBOL(drm_clflush_pages); diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index 452c2d866ec5..96f416afc3f6 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -116,7 +116,13 @@ static struct drm_ioctl_desc drm_ioctls[] = { DRM_IOCTL_DEF(DRM_IOCTL_WAIT_VBLANK, drm_wait_vblank, 0), + DRM_IOCTL_DEF(DRM_IOCTL_MODESET_CTL, drm_modeset_ctl, 0), + DRM_IOCTL_DEF(DRM_IOCTL_UPDATE_DRAW, drm_update_drawable_info, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), + + DRM_IOCTL_DEF(DRM_IOCTL_GEM_CLOSE, drm_gem_close_ioctl, 0), + DRM_IOCTL_DEF(DRM_IOCTL_GEM_FLINK, drm_gem_flink_ioctl, DRM_AUTH), + DRM_IOCTL_DEF(DRM_IOCTL_GEM_OPEN, drm_gem_open_ioctl, DRM_AUTH), }; #define DRM_CORE_IOCTL_COUNT ARRAY_SIZE( drm_ioctls ) diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c index 851a53f1acce..0d46627663b1 100644 --- a/drivers/gpu/drm/drm_fops.c +++ b/drivers/gpu/drm/drm_fops.c @@ -246,7 +246,7 @@ static int drm_open_helper(struct inode *inode, struct file *filp, memset(priv, 0, sizeof(*priv)); filp->private_data = priv; priv->filp = filp; - priv->uid = current->euid; + priv->uid = current_euid(); priv->pid = task_pid_nr(current); priv->minor = idr_find(&drm_minors_idr, minor_id); priv->ioctl_count = 0; @@ -256,6 +256,9 @@ static int drm_open_helper(struct inode *inode, struct file *filp, INIT_LIST_HEAD(&priv->lhead); + if (dev->driver->driver_features & DRIVER_GEM) + drm_gem_open(dev, priv); + if (dev->driver->open) { ret = dev->driver->open(dev, priv); if (ret < 0) @@ -400,6 +403,9 @@ int drm_release(struct inode *inode, struct file *filp) dev->driver->reclaim_buffers(dev, file_priv); } + if (dev->driver->driver_features & DRIVER_GEM) + drm_gem_release(dev, file_priv); + drm_fasync(-1, filp, 0); mutex_lock(&dev->ctxlist_mutex); diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c new file mode 100644 index 000000000000..ccd1afdede02 --- /dev/null +++ b/drivers/gpu/drm/drm_gem.c @@ -0,0 +1,421 @@ +/* + * Copyright © 2008 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * + */ + +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/uaccess.h> +#include <linux/fs.h> +#include <linux/file.h> +#include <linux/module.h> +#include <linux/mman.h> +#include <linux/pagemap.h> +#include "drmP.h" + +/** @file drm_gem.c + * + * This file provides some of the base ioctls and library routines for + * the graphics memory manager implemented by each device driver. + * + * Because various devices have different requirements in terms of + * synchronization and migration strategies, implementing that is left up to + * the driver, and all that the general API provides should be generic -- + * allocating objects, reading/writing data with the cpu, freeing objects. + * Even there, platform-dependent optimizations for reading/writing data with + * the CPU mean we'll likely hook those out to driver-specific calls. However, + * the DRI2 implementation wants to have at least allocate/mmap be generic. + * + * The goal was to have swap-backed object allocation managed through + * struct file. However, file descriptors as handles to a struct file have + * two major failings: + * - Process limits prevent more than 1024 or so being used at a time by + * default. + * - Inability to allocate high fds will aggravate the X Server's select() + * handling, and likely that of many GL client applications as well. + * + * This led to a plan of using our own integer IDs (called handles, following + * DRM terminology) to mimic fds, and implement the fd syscalls we need as + * ioctls. The objects themselves will still include the struct file so + * that we can transition to fds if the required kernel infrastructure shows + * up at a later date, and as our interface with shmfs for memory allocation. + */ + +/** + * Initialize the GEM device fields + */ + +int +drm_gem_init(struct drm_device *dev) +{ + spin_lock_init(&dev->object_name_lock); + idr_init(&dev->object_name_idr); + atomic_set(&dev->object_count, 0); + atomic_set(&dev->object_memory, 0); + atomic_set(&dev->pin_count, 0); + atomic_set(&dev->pin_memory, 0); + atomic_set(&dev->gtt_count, 0); + atomic_set(&dev->gtt_memory, 0); + return 0; +} + +/** + * Allocate a GEM object of the specified size with shmfs backing store + */ +struct drm_gem_object * +drm_gem_object_alloc(struct drm_device *dev, size_t size) +{ + struct drm_gem_object *obj; + + BUG_ON((size & (PAGE_SIZE - 1)) != 0); + + obj = kcalloc(1, sizeof(*obj), GFP_KERNEL); + + obj->dev = dev; + obj->filp = shmem_file_setup("drm mm object", size, 0); + if (IS_ERR(obj->filp)) { + kfree(obj); + return NULL; + } + + kref_init(&obj->refcount); + kref_init(&obj->handlecount); + obj->size = size; + if (dev->driver->gem_init_object != NULL && + dev->driver->gem_init_object(obj) != 0) { + fput(obj->filp); + kfree(obj); + return NULL; + } + atomic_inc(&dev->object_count); + atomic_add(obj->size, &dev->object_memory); + return obj; +} +EXPORT_SYMBOL(drm_gem_object_alloc); + +/** + * Removes the mapping from handle to filp for this object. + */ +static int +drm_gem_handle_delete(struct drm_file *filp, int handle) +{ + struct drm_device *dev; + struct drm_gem_object *obj; + + /* This is gross. The idr system doesn't let us try a delete and + * return an error code. It just spews if you fail at deleting. + * So, we have to grab a lock around finding the object and then + * doing the delete on it and dropping the refcount, or the user + * could race us to double-decrement the refcount and cause a + * use-after-free later. Given the frequency of our handle lookups, + * we may want to use ida for number allocation and a hash table + * for the pointers, anyway. + */ + spin_lock(&filp->table_lock); + + /* Check if we currently have a reference on the object */ + obj = idr_find(&filp->object_idr, handle); + if (obj == NULL) { + spin_unlock(&filp->table_lock); + return -EINVAL; + } + dev = obj->dev; + + /* Release reference and decrement refcount. */ + idr_remove(&filp->object_idr, handle); + spin_unlock(&filp->table_lock); + + mutex_lock(&dev->struct_mutex); + drm_gem_object_handle_unreference(obj); + mutex_unlock(&dev->struct_mutex); + + return 0; +} + +/** + * Create a handle for this object. This adds a handle reference + * to the object, which includes a regular reference count. Callers + * will likely want to dereference the object afterwards. + */ +int +drm_gem_handle_create(struct drm_file *file_priv, + struct drm_gem_object *obj, + int *handlep) +{ + int ret; + + /* + * Get the user-visible handle using idr. + */ +again: + /* ensure there is space available to allocate a handle */ + if (idr_pre_get(&file_priv->object_idr, GFP_KERNEL) == 0) + return -ENOMEM; + + /* do the allocation under our spinlock */ + spin_lock(&file_priv->table_lock); + ret = idr_get_new_above(&file_priv->object_idr, obj, 1, handlep); + spin_unlock(&file_priv->table_lock); + if (ret == -EAGAIN) + goto again; + + if (ret != 0) + return ret; + + drm_gem_object_handle_reference(obj); + return 0; +} +EXPORT_SYMBOL(drm_gem_handle_create); + +/** Returns a reference to the object named by the handle. */ +struct drm_gem_object * +drm_gem_object_lookup(struct drm_device *dev, struct drm_file *filp, + int handle) +{ + struct drm_gem_object *obj; + + spin_lock(&filp->table_lock); + + /* Check if we currently have a reference on the object */ + obj = idr_find(&filp->object_idr, handle); + if (obj == NULL) { + spin_unlock(&filp->table_lock); + return NULL; + } + + drm_gem_object_reference(obj); + + spin_unlock(&filp->table_lock); + + return obj; +} +EXPORT_SYMBOL(drm_gem_object_lookup); + +/** + * Releases the handle to an mm object. + */ +int +drm_gem_close_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_gem_close *args = data; + int ret; + + if (!(dev->driver->driver_features & DRIVER_GEM)) + return -ENODEV; + + ret = drm_gem_handle_delete(file_priv, args->handle); + + return ret; +} + +/** + * Create a global name for an object, returning the name. + * + * Note that the name does not hold a reference; when the object + * is freed, the name goes away. + */ +int +drm_gem_flink_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_gem_flink *args = data; + struct drm_gem_object *obj; + int ret; + + if (!(dev->driver->driver_features & DRIVER_GEM)) + return -ENODEV; + + obj = drm_gem_object_lookup(dev, file_priv, args->handle); + if (obj == NULL) + return -EBADF; + +again: + if (idr_pre_get(&dev->object_name_idr, GFP_KERNEL) == 0) + return -ENOMEM; + + spin_lock(&dev->object_name_lock); + if (obj->name) { + args->name = obj->name; + spin_unlock(&dev->object_name_lock); + return 0; + } + ret = idr_get_new_above(&dev->object_name_idr, obj, 1, + &obj->name); + spin_unlock(&dev->object_name_lock); + if (ret == -EAGAIN) + goto again; + + if (ret != 0) { + mutex_lock(&dev->struct_mutex); + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + return ret; + } + + /* + * Leave the reference from the lookup around as the + * name table now holds one + */ + args->name = (uint64_t) obj->name; + + return 0; +} + +/** + * Open an object using the global name, returning a handle and the size. + * + * This handle (of course) holds a reference to the object, so the object + * will not go away until the handle is deleted. + */ +int +drm_gem_open_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_gem_open *args = data; + struct drm_gem_object *obj; + int ret; + int handle; + + if (!(dev->driver->driver_features & DRIVER_GEM)) + return -ENODEV; + + spin_lock(&dev->object_name_lock); + obj = idr_find(&dev->object_name_idr, (int) args->name); + if (obj) + drm_gem_object_reference(obj); + spin_unlock(&dev->object_name_lock); + if (!obj) + return -ENOENT; + + ret = drm_gem_handle_create(file_priv, obj, &handle); + mutex_lock(&dev->struct_mutex); + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + if (ret) + return ret; + + args->handle = handle; + args->size = obj->size; + + return 0; +} + +/** + * Called at device open time, sets up the structure for handling refcounting + * of mm objects. + */ +void +drm_gem_open(struct drm_device *dev, struct drm_file *file_private) +{ + idr_init(&file_private->object_idr); + spin_lock_init(&file_private->table_lock); +} + +/** + * Called at device close to release the file's + * handle references on objects. + */ +static int +drm_gem_object_release_handle(int id, void *ptr, void *data) +{ + struct drm_gem_object *obj = ptr; + + drm_gem_object_handle_unreference(obj); + + return 0; +} + +/** + * Called at close time when the filp is going away. + * + * Releases any remaining references on objects by this filp. + */ +void +drm_gem_release(struct drm_device *dev, struct drm_file *file_private) +{ + mutex_lock(&dev->struct_mutex); + idr_for_each(&file_private->object_idr, + &drm_gem_object_release_handle, NULL); + + idr_destroy(&file_private->object_idr); + mutex_unlock(&dev->struct_mutex); +} + +/** + * Called after the last reference to the object has been lost. + * + * Frees the object + */ +void +drm_gem_object_free(struct kref *kref) +{ + struct drm_gem_object *obj = (struct drm_gem_object *) kref; + struct drm_device *dev = obj->dev; + + BUG_ON(!mutex_is_locked(&dev->struct_mutex)); + + if (dev->driver->gem_free_object != NULL) + dev->driver->gem_free_object(obj); + + fput(obj->filp); + atomic_dec(&dev->object_count); + atomic_sub(obj->size, &dev->object_memory); + kfree(obj); +} +EXPORT_SYMBOL(drm_gem_object_free); + +/** + * Called after the last handle to the object has been closed + * + * Removes any name for the object. Note that this must be + * called before drm_gem_object_free or we'll be touching + * freed memory + */ +void +drm_gem_object_handle_free(struct kref *kref) +{ + struct drm_gem_object *obj = container_of(kref, + struct drm_gem_object, + handlecount); + struct drm_device *dev = obj->dev; + + /* Remove any name for this object */ + spin_lock(&dev->object_name_lock); + if (obj->name) { + idr_remove(&dev->object_name_idr, obj->name); + spin_unlock(&dev->object_name_lock); + /* + * The object name held a reference to this object, drop + * that now. + */ + drm_gem_object_unreference(obj); + } else + spin_unlock(&dev->object_name_lock); + +} +EXPORT_SYMBOL(drm_gem_object_handle_free); + diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 53f0e5af1cc8..4091b9e291f9 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -63,7 +63,7 @@ int drm_irq_by_busid(struct drm_device *dev, void *data, p->devnum != PCI_SLOT(dev->pdev->devfn) || p->funcnum != PCI_FUNC(dev->pdev->devfn)) return -EINVAL; - p->irq = dev->irq; + p->irq = dev->pdev->irq; DRM_DEBUG("%d:%d:%d => IRQ %d\n", p->busnum, p->devnum, p->funcnum, p->irq); @@ -71,25 +71,137 @@ int drm_irq_by_busid(struct drm_device *dev, void *data, return 0; } +static void vblank_disable_fn(unsigned long arg) +{ + struct drm_device *dev = (struct drm_device *)arg; + unsigned long irqflags; + int i; + + if (!dev->vblank_disable_allowed) + return; + + for (i = 0; i < dev->num_crtcs; i++) { + spin_lock_irqsave(&dev->vbl_lock, irqflags); + if (atomic_read(&dev->vblank_refcount[i]) == 0 && + dev->vblank_enabled[i]) { + DRM_DEBUG("disabling vblank on crtc %d\n", i); + dev->last_vblank[i] = + dev->driver->get_vblank_counter(dev, i); + dev->driver->disable_vblank(dev, i); + dev->vblank_enabled[i] = 0; + } + spin_unlock_irqrestore(&dev->vbl_lock, irqflags); + } +} + +static void drm_vblank_cleanup(struct drm_device *dev) +{ + /* Bail if the driver didn't call drm_vblank_init() */ + if (dev->num_crtcs == 0) + return; + + del_timer(&dev->vblank_disable_timer); + + vblank_disable_fn((unsigned long)dev); + + drm_free(dev->vbl_queue, sizeof(*dev->vbl_queue) * dev->num_crtcs, + DRM_MEM_DRIVER); + drm_free(dev->vbl_sigs, sizeof(*dev->vbl_sigs) * dev->num_crtcs, + DRM_MEM_DRIVER); + drm_free(dev->_vblank_count, sizeof(*dev->_vblank_count) * + dev->num_crtcs, DRM_MEM_DRIVER); + drm_free(dev->vblank_refcount, sizeof(*dev->vblank_refcount) * + dev->num_crtcs, DRM_MEM_DRIVER); + drm_free(dev->vblank_enabled, sizeof(*dev->vblank_enabled) * + dev->num_crtcs, DRM_MEM_DRIVER); + drm_free(dev->last_vblank, sizeof(*dev->last_vblank) * dev->num_crtcs, + DRM_MEM_DRIVER); + drm_free(dev->vblank_inmodeset, sizeof(*dev->vblank_inmodeset) * + dev->num_crtcs, DRM_MEM_DRIVER); + + dev->num_crtcs = 0; +} + +int drm_vblank_init(struct drm_device *dev, int num_crtcs) +{ + int i, ret = -ENOMEM; + + setup_timer(&dev->vblank_disable_timer, vblank_disable_fn, + (unsigned long)dev); + spin_lock_init(&dev->vbl_lock); + atomic_set(&dev->vbl_signal_pending, 0); + dev->num_crtcs = num_crtcs; + + dev->vbl_queue = drm_alloc(sizeof(wait_queue_head_t) * num_crtcs, + DRM_MEM_DRIVER); + if (!dev->vbl_queue) + goto err; + + dev->vbl_sigs = drm_alloc(sizeof(struct list_head) * num_crtcs, + DRM_MEM_DRIVER); + if (!dev->vbl_sigs) + goto err; + + dev->_vblank_count = drm_alloc(sizeof(atomic_t) * num_crtcs, + DRM_MEM_DRIVER); + if (!dev->_vblank_count) + goto err; + + dev->vblank_refcount = drm_alloc(sizeof(atomic_t) * num_crtcs, + DRM_MEM_DRIVER); + if (!dev->vblank_refcount) + goto err; + + dev->vblank_enabled = drm_calloc(num_crtcs, sizeof(int), + DRM_MEM_DRIVER); + if (!dev->vblank_enabled) + goto err; + + dev->last_vblank = drm_calloc(num_crtcs, sizeof(u32), DRM_MEM_DRIVER); + if (!dev->last_vblank) + goto err; + + dev->vblank_inmodeset = drm_calloc(num_crtcs, sizeof(int), + DRM_MEM_DRIVER); + if (!dev->vblank_inmodeset) + goto err; + + /* Zero per-crtc vblank stuff */ + for (i = 0; i < num_crtcs; i++) { + init_waitqueue_head(&dev->vbl_queue[i]); + INIT_LIST_HEAD(&dev->vbl_sigs[i]); + atomic_set(&dev->_vblank_count[i], 0); + atomic_set(&dev->vblank_refcount[i], 0); + } + + dev->vblank_disable_allowed = 0; + + return 0; + +err: + drm_vblank_cleanup(dev); + return ret; +} +EXPORT_SYMBOL(drm_vblank_init); + /** * Install IRQ handler. * * \param dev DRM device. - * \param irq IRQ number. * - * Initializes the IRQ related data, and setups drm_device::vbl_queue. Installs the handler, calling the driver + * Initializes the IRQ related data. Installs the handler, calling the driver * \c drm_driver_irq_preinstall() and \c drm_driver_irq_postinstall() functions * before and after the installation. */ -static int drm_irq_install(struct drm_device * dev) +int drm_irq_install(struct drm_device *dev) { - int ret; + int ret = 0; unsigned long sh_flags = 0; if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ)) return -EINVAL; - if (dev->irq == 0) + if (dev->pdev->irq == 0) return -EINVAL; mutex_lock(&dev->struct_mutex); @@ -107,18 +219,7 @@ static int drm_irq_install(struct drm_device * dev) dev->irq_enabled = 1; mutex_unlock(&dev->struct_mutex); - DRM_DEBUG("irq=%d\n", dev->irq); - - if (drm_core_check_feature(dev, DRIVER_IRQ_VBL)) { - init_waitqueue_head(&dev->vbl_queue); - - spin_lock_init(&dev->vbl_lock); - - INIT_LIST_HEAD(&dev->vbl_sigs); - INIT_LIST_HEAD(&dev->vbl_sigs2); - - dev->vbl_pending = 0; - } + DRM_DEBUG("irq=%d\n", dev->pdev->irq); /* Before installing handler */ dev->driver->irq_preinstall(dev); @@ -127,8 +228,9 @@ static int drm_irq_install(struct drm_device * dev) if (drm_core_check_feature(dev, DRIVER_IRQ_SHARED)) sh_flags = IRQF_SHARED; - ret = request_irq(dev->irq, dev->driver->irq_handler, + ret = request_irq(drm_dev_to_irq(dev), dev->driver->irq_handler, sh_flags, dev->devname, dev); + if (ret < 0) { mutex_lock(&dev->struct_mutex); dev->irq_enabled = 0; @@ -137,10 +239,16 @@ static int drm_irq_install(struct drm_device * dev) } /* After installing handler */ - dev->driver->irq_postinstall(dev); + ret = dev->driver->irq_postinstall(dev); + if (ret < 0) { + mutex_lock(&dev->struct_mutex); + dev->irq_enabled = 0; + mutex_unlock(&dev->struct_mutex); + } - return 0; + return ret; } +EXPORT_SYMBOL(drm_irq_install); /** * Uninstall the IRQ handler. @@ -164,17 +272,18 @@ int drm_irq_uninstall(struct drm_device * dev) if (!irq_enabled) return -EINVAL; - DRM_DEBUG("irq=%d\n", dev->irq); + DRM_DEBUG("irq=%d\n", dev->pdev->irq); dev->driver->irq_uninstall(dev); - free_irq(dev->irq, dev); + free_irq(dev->pdev->irq, dev); + + drm_vblank_cleanup(dev); dev->locked_tasklet_func = NULL; return 0; } - EXPORT_SYMBOL(drm_irq_uninstall); /** @@ -201,7 +310,7 @@ int drm_control(struct drm_device *dev, void *data, if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ)) return 0; if (dev->if_version < DRM_IF_VERSION(1, 2) && - ctl->irq != dev->irq) + ctl->irq != dev->pdev->irq) return -EINVAL; return drm_irq_install(dev); case DRM_UNINST_HANDLER: @@ -214,6 +323,174 @@ int drm_control(struct drm_device *dev, void *data, } /** + * drm_vblank_count - retrieve "cooked" vblank counter value + * @dev: DRM device + * @crtc: which counter to retrieve + * + * Fetches the "cooked" vblank count value that represents the number of + * vblank events since the system was booted, including lost events due to + * modesetting activity. + */ +u32 drm_vblank_count(struct drm_device *dev, int crtc) +{ + return atomic_read(&dev->_vblank_count[crtc]); +} +EXPORT_SYMBOL(drm_vblank_count); + +/** + * drm_update_vblank_count - update the master vblank counter + * @dev: DRM device + * @crtc: counter to update + * + * Call back into the driver to update the appropriate vblank counter + * (specified by @crtc). Deal with wraparound, if it occurred, and + * update the last read value so we can deal with wraparound on the next + * call if necessary. + * + * Only necessary when going from off->on, to account for frames we + * didn't get an interrupt for. + * + * Note: caller must hold dev->vbl_lock since this reads & writes + * device vblank fields. + */ +static void drm_update_vblank_count(struct drm_device *dev, int crtc) +{ + u32 cur_vblank, diff; + + /* + * Interrupts were disabled prior to this call, so deal with counter + * wrap if needed. + * NOTE! It's possible we lost a full dev->max_vblank_count events + * here if the register is small or we had vblank interrupts off for + * a long time. + */ + cur_vblank = dev->driver->get_vblank_counter(dev, crtc); + diff = cur_vblank - dev->last_vblank[crtc]; + if (cur_vblank < dev->last_vblank[crtc]) { + diff += dev->max_vblank_count; + + DRM_DEBUG("last_vblank[%d]=0x%x, cur_vblank=0x%x => diff=0x%x\n", + crtc, dev->last_vblank[crtc], cur_vblank, diff); + } + + DRM_DEBUG("enabling vblank interrupts on crtc %d, missed %d\n", + crtc, diff); + + atomic_add(diff, &dev->_vblank_count[crtc]); +} + +/** + * drm_vblank_get - get a reference count on vblank events + * @dev: DRM device + * @crtc: which CRTC to own + * + * Acquire a reference count on vblank events to avoid having them disabled + * while in use. + * + * RETURNS + * Zero on success, nonzero on failure. + */ +int drm_vblank_get(struct drm_device *dev, int crtc) +{ + unsigned long irqflags; + int ret = 0; + + spin_lock_irqsave(&dev->vbl_lock, irqflags); + /* Going from 0->1 means we have to enable interrupts again */ + if (atomic_add_return(1, &dev->vblank_refcount[crtc]) == 1 && + !dev->vblank_enabled[crtc]) { + ret = dev->driver->enable_vblank(dev, crtc); + DRM_DEBUG("enabling vblank on crtc %d, ret: %d\n", crtc, ret); + if (ret) + atomic_dec(&dev->vblank_refcount[crtc]); + else { + dev->vblank_enabled[crtc] = 1; + drm_update_vblank_count(dev, crtc); + } + } + spin_unlock_irqrestore(&dev->vbl_lock, irqflags); + + return ret; +} +EXPORT_SYMBOL(drm_vblank_get); + +/** + * drm_vblank_put - give up ownership of vblank events + * @dev: DRM device + * @crtc: which counter to give up + * + * Release ownership of a given vblank counter, turning off interrupts + * if possible. + */ +void drm_vblank_put(struct drm_device *dev, int crtc) +{ + /* Last user schedules interrupt disable */ + if (atomic_dec_and_test(&dev->vblank_refcount[crtc])) + mod_timer(&dev->vblank_disable_timer, jiffies + 5*DRM_HZ); +} +EXPORT_SYMBOL(drm_vblank_put); + +/** + * drm_modeset_ctl - handle vblank event counter changes across mode switch + * @DRM_IOCTL_ARGS: standard ioctl arguments + * + * Applications should call the %_DRM_PRE_MODESET and %_DRM_POST_MODESET + * ioctls around modesetting so that any lost vblank events are accounted for. + * + * Generally the counter will reset across mode sets. If interrupts are + * enabled around this call, we don't have to do anything since the counter + * will have already been incremented. + */ +int drm_modeset_ctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_modeset_ctl *modeset = data; + unsigned long irqflags; + int crtc, ret = 0; + + /* If drm_vblank_init() hasn't been called yet, just no-op */ + if (!dev->num_crtcs) + goto out; + + crtc = modeset->crtc; + if (crtc >= dev->num_crtcs) { + ret = -EINVAL; + goto out; + } + + /* + * To avoid all the problems that might happen if interrupts + * were enabled/disabled around or between these calls, we just + * have the kernel take a reference on the CRTC (just once though + * to avoid corrupting the count if multiple, mismatch calls occur), + * so that interrupts remain enabled in the interim. + */ + switch (modeset->cmd) { + case _DRM_PRE_MODESET: + if (!dev->vblank_inmodeset[crtc]) { + dev->vblank_inmodeset[crtc] = 1; + drm_vblank_get(dev, crtc); + } + break; + case _DRM_POST_MODESET: + if (dev->vblank_inmodeset[crtc]) { + spin_lock_irqsave(&dev->vbl_lock, irqflags); + dev->vblank_disable_allowed = 1; + dev->vblank_inmodeset[crtc] = 0; + spin_unlock_irqrestore(&dev->vbl_lock, irqflags); + drm_vblank_put(dev, crtc); + } + break; + default: + ret = -EINVAL; + break; + } + +out: + return ret; +} + +/** * Wait for VBLANK. * * \param inode device inode. @@ -232,14 +509,14 @@ int drm_control(struct drm_device *dev, void *data, * * If a signal is not requested, then calls vblank_wait(). */ -int drm_wait_vblank(struct drm_device *dev, void *data, struct drm_file *file_priv) +int drm_wait_vblank(struct drm_device *dev, void *data, + struct drm_file *file_priv) { union drm_wait_vblank *vblwait = data; - struct timeval now; int ret = 0; - unsigned int flags, seq; + unsigned int flags, seq, crtc; - if ((!dev->irq) || (!dev->irq_enabled)) + if ((!dev->pdev->irq) || (!dev->irq_enabled)) return -EINVAL; if (vblwait->request.type & @@ -251,13 +528,17 @@ int drm_wait_vblank(struct drm_device *dev, void *data, struct drm_file *file_pr } flags = vblwait->request.type & _DRM_VBLANK_FLAGS_MASK; + crtc = flags & _DRM_VBLANK_SECONDARY ? 1 : 0; - if (!drm_core_check_feature(dev, (flags & _DRM_VBLANK_SECONDARY) ? - DRIVER_IRQ_VBL2 : DRIVER_IRQ_VBL)) + if (crtc >= dev->num_crtcs) return -EINVAL; - seq = atomic_read((flags & _DRM_VBLANK_SECONDARY) ? &dev->vbl_received2 - : &dev->vbl_received); + ret = drm_vblank_get(dev, crtc); + if (ret) { + DRM_ERROR("failed to acquire vblank counter, %d\n", ret); + return ret; + } + seq = drm_vblank_count(dev, crtc); switch (vblwait->request.type & _DRM_VBLANK_TYPES_MASK) { case _DRM_VBLANK_RELATIVE: @@ -266,7 +547,8 @@ int drm_wait_vblank(struct drm_device *dev, void *data, struct drm_file *file_pr case _DRM_VBLANK_ABSOLUTE: break; default: - return -EINVAL; + ret = -EINVAL; + goto done; } if ((flags & _DRM_VBLANK_NEXTONMISS) && @@ -276,8 +558,7 @@ int drm_wait_vblank(struct drm_device *dev, void *data, struct drm_file *file_pr if (flags & _DRM_VBLANK_SIGNAL) { unsigned long irqflags; - struct list_head *vbl_sigs = (flags & _DRM_VBLANK_SECONDARY) - ? &dev->vbl_sigs2 : &dev->vbl_sigs; + struct list_head *vbl_sigs = &dev->vbl_sigs[crtc]; struct drm_vbl_sig *vbl_sig; spin_lock_irqsave(&dev->vbl_lock, irqflags); @@ -298,22 +579,29 @@ int drm_wait_vblank(struct drm_device *dev, void *data, struct drm_file *file_pr } } - if (dev->vbl_pending >= 100) { + if (atomic_read(&dev->vbl_signal_pending) >= 100) { spin_unlock_irqrestore(&dev->vbl_lock, irqflags); - return -EBUSY; + ret = -EBUSY; + goto done; } - dev->vbl_pending++; - spin_unlock_irqrestore(&dev->vbl_lock, irqflags); - if (! - (vbl_sig = - drm_alloc(sizeof(struct drm_vbl_sig), DRM_MEM_DRIVER))) { - return -ENOMEM; + vbl_sig = drm_calloc(1, sizeof(struct drm_vbl_sig), + DRM_MEM_DRIVER); + if (!vbl_sig) { + ret = -ENOMEM; + goto done; + } + + ret = drm_vblank_get(dev, crtc); + if (ret) { + drm_free(vbl_sig, sizeof(struct drm_vbl_sig), + DRM_MEM_DRIVER); + return ret; } - memset((void *)vbl_sig, 0, sizeof(*vbl_sig)); + atomic_inc(&dev->vbl_signal_pending); vbl_sig->sequence = vblwait->request.sequence; vbl_sig->info.si_signo = vblwait->request.signal; @@ -327,20 +615,29 @@ int drm_wait_vblank(struct drm_device *dev, void *data, struct drm_file *file_pr vblwait->reply.sequence = seq; } else { - if (flags & _DRM_VBLANK_SECONDARY) { - if (dev->driver->vblank_wait2) - ret = dev->driver->vblank_wait2(dev, &vblwait->request.sequence); - } else if (dev->driver->vblank_wait) - ret = - dev->driver->vblank_wait(dev, - &vblwait->request.sequence); - - do_gettimeofday(&now); - vblwait->reply.tval_sec = now.tv_sec; - vblwait->reply.tval_usec = now.tv_usec; + DRM_DEBUG("waiting on vblank count %d, crtc %d\n", + vblwait->request.sequence, crtc); + DRM_WAIT_ON(ret, dev->vbl_queue[crtc], 3 * DRM_HZ, + ((drm_vblank_count(dev, crtc) + - vblwait->request.sequence) <= (1 << 23))); + + if (ret != -EINTR) { + struct timeval now; + + do_gettimeofday(&now); + + vblwait->reply.tval_sec = now.tv_sec; + vblwait->reply.tval_usec = now.tv_usec; + vblwait->reply.sequence = drm_vblank_count(dev, crtc); + DRM_DEBUG("returning %d to client\n", + vblwait->reply.sequence); + } else { + DRM_DEBUG("vblank wait interrupted by signal\n"); + } } - done: +done: + drm_vblank_put(dev, crtc); return ret; } @@ -348,44 +645,57 @@ int drm_wait_vblank(struct drm_device *dev, void *data, struct drm_file *file_pr * Send the VBLANK signals. * * \param dev DRM device. + * \param crtc CRTC where the vblank event occurred * * Sends a signal for each task in drm_device::vbl_sigs and empties the list. * * If a signal is not requested, then calls vblank_wait(). */ -void drm_vbl_send_signals(struct drm_device * dev) +static void drm_vbl_send_signals(struct drm_device *dev, int crtc) { + struct drm_vbl_sig *vbl_sig, *tmp; + struct list_head *vbl_sigs; + unsigned int vbl_seq; unsigned long flags; - int i; spin_lock_irqsave(&dev->vbl_lock, flags); - for (i = 0; i < 2; i++) { - struct drm_vbl_sig *vbl_sig, *tmp; - struct list_head *vbl_sigs = i ? &dev->vbl_sigs2 : &dev->vbl_sigs; - unsigned int vbl_seq = atomic_read(i ? &dev->vbl_received2 : - &dev->vbl_received); + vbl_sigs = &dev->vbl_sigs[crtc]; + vbl_seq = drm_vblank_count(dev, crtc); - list_for_each_entry_safe(vbl_sig, tmp, vbl_sigs, head) { - if ((vbl_seq - vbl_sig->sequence) <= (1 << 23)) { - vbl_sig->info.si_code = vbl_seq; - send_sig_info(vbl_sig->info.si_signo, - &vbl_sig->info, vbl_sig->task); + list_for_each_entry_safe(vbl_sig, tmp, vbl_sigs, head) { + if ((vbl_seq - vbl_sig->sequence) <= (1 << 23)) { + vbl_sig->info.si_code = vbl_seq; + send_sig_info(vbl_sig->info.si_signo, + &vbl_sig->info, vbl_sig->task); - list_del(&vbl_sig->head); - - drm_free(vbl_sig, sizeof(*vbl_sig), - DRM_MEM_DRIVER); + list_del(&vbl_sig->head); - dev->vbl_pending--; - } - } + drm_free(vbl_sig, sizeof(*vbl_sig), + DRM_MEM_DRIVER); + atomic_dec(&dev->vbl_signal_pending); + drm_vblank_put(dev, crtc); + } } spin_unlock_irqrestore(&dev->vbl_lock, flags); } -EXPORT_SYMBOL(drm_vbl_send_signals); +/** + * drm_handle_vblank - handle a vblank event + * @dev: DRM device + * @crtc: where this event occurred + * + * Drivers should call this routine in their vblank interrupt handlers to + * update the vblank counter and send any signals that may be pending. + */ +void drm_handle_vblank(struct drm_device *dev, int crtc) +{ + atomic_inc(&dev->_vblank_count[crtc]); + DRM_WAKEUP(&dev->vbl_queue[crtc]); + drm_vbl_send_signals(dev, crtc); +} +EXPORT_SYMBOL(drm_handle_vblank); /** * Tasklet wrapper function. diff --git a/drivers/gpu/drm/drm_memory.c b/drivers/gpu/drm/drm_memory.c index 0177012845c6..803bc9e7ce3c 100644 --- a/drivers/gpu/drm/drm_memory.c +++ b/drivers/gpu/drm/drm_memory.c @@ -133,6 +133,7 @@ int drm_free_agp(DRM_AGP_MEM * handle, int pages) { return drm_agp_free_memory(handle) ? 0 : -EINVAL; } +EXPORT_SYMBOL(drm_free_agp); /** Wrapper around agp_bind_memory() */ int drm_bind_agp(DRM_AGP_MEM * handle, unsigned int start) @@ -145,6 +146,7 @@ int drm_unbind_agp(DRM_AGP_MEM * handle) { return drm_agp_unbind_memory(handle); } +EXPORT_SYMBOL(drm_unbind_agp); #else /* __OS_HAS_AGP */ static inline void *agp_remap(unsigned long offset, unsigned long size, diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c index dcff9e9b52e3..217ad7dc7076 100644 --- a/drivers/gpu/drm/drm_mm.c +++ b/drivers/gpu/drm/drm_mm.c @@ -169,6 +169,7 @@ struct drm_mm_node *drm_mm_get_block(struct drm_mm_node * parent, return child; } +EXPORT_SYMBOL(drm_mm_get_block); /* * Put a block. Merge with the previous and / or next block if they are free. @@ -217,6 +218,7 @@ void drm_mm_put_block(struct drm_mm_node * cur) drm_free(cur, sizeof(*cur), DRM_MEM_MM); } } +EXPORT_SYMBOL(drm_mm_put_block); struct drm_mm_node *drm_mm_search_free(const struct drm_mm * mm, unsigned long size, @@ -265,6 +267,7 @@ int drm_mm_clean(struct drm_mm * mm) return (head->next->next == head); } +EXPORT_SYMBOL(drm_mm_search_free); int drm_mm_init(struct drm_mm * mm, unsigned long start, unsigned long size) { @@ -273,7 +276,7 @@ int drm_mm_init(struct drm_mm * mm, unsigned long start, unsigned long size) return drm_mm_create_tail_node(mm, start, size); } - +EXPORT_SYMBOL(drm_mm_init); void drm_mm_takedown(struct drm_mm * mm) { diff --git a/drivers/gpu/drm/drm_proc.c b/drivers/gpu/drm/drm_proc.c index 93b1e0475c93..d490db4c0de0 100644 --- a/drivers/gpu/drm/drm_proc.c +++ b/drivers/gpu/drm/drm_proc.c @@ -49,6 +49,10 @@ static int drm_queues_info(char *buf, char **start, off_t offset, int request, int *eof, void *data); static int drm_bufs_info(char *buf, char **start, off_t offset, int request, int *eof, void *data); +static int drm_gem_name_info(char *buf, char **start, off_t offset, + int request, int *eof, void *data); +static int drm_gem_object_info(char *buf, char **start, off_t offset, + int request, int *eof, void *data); #if DRM_DEBUG_CODE static int drm_vma_info(char *buf, char **start, off_t offset, int request, int *eof, void *data); @@ -60,13 +64,16 @@ static int drm_vma_info(char *buf, char **start, off_t offset, static struct drm_proc_list { const char *name; /**< file name */ int (*f) (char *, char **, off_t, int, int *, void *); /**< proc callback*/ + u32 driver_features; /**< Required driver features for this entry */ } drm_proc_list[] = { - {"name", drm_name_info}, - {"mem", drm_mem_info}, - {"vm", drm_vm_info}, - {"clients", drm_clients_info}, - {"queues", drm_queues_info}, - {"bufs", drm_bufs_info}, + {"name", drm_name_info, 0}, + {"mem", drm_mem_info, 0}, + {"vm", drm_vm_info, 0}, + {"clients", drm_clients_info, 0}, + {"queues", drm_queues_info, 0}, + {"bufs", drm_bufs_info, 0}, + {"gem_names", drm_gem_name_info, DRIVER_GEM}, + {"gem_objects", drm_gem_object_info, DRIVER_GEM}, #if DRM_DEBUG_CODE {"vma", drm_vma_info}, #endif @@ -90,8 +97,9 @@ static struct drm_proc_list { int drm_proc_init(struct drm_minor *minor, int minor_id, struct proc_dir_entry *root) { + struct drm_device *dev = minor->dev; struct proc_dir_entry *ent; - int i, j; + int i, j, ret; char name[64]; sprintf(name, "%d", minor_id); @@ -102,23 +110,42 @@ int drm_proc_init(struct drm_minor *minor, int minor_id, } for (i = 0; i < DRM_PROC_ENTRIES; i++) { + u32 features = drm_proc_list[i].driver_features; + + if (features != 0 && + (dev->driver->driver_features & features) != features) + continue; + ent = create_proc_entry(drm_proc_list[i].name, S_IFREG | S_IRUGO, minor->dev_root); if (!ent) { DRM_ERROR("Cannot create /proc/dri/%s/%s\n", name, drm_proc_list[i].name); - for (j = 0; j < i; j++) - remove_proc_entry(drm_proc_list[i].name, - minor->dev_root); - remove_proc_entry(name, root); - minor->dev_root = NULL; - return -1; + ret = -1; + goto fail; } ent->read_proc = drm_proc_list[i].f; ent->data = minor; } + if (dev->driver->proc_init) { + ret = dev->driver->proc_init(minor); + if (ret) { + DRM_ERROR("DRM: Driver failed to initialize " + "/proc/dri.\n"); + goto fail; + } + } + return 0; + fail: + + for (j = 0; j < i; j++) + remove_proc_entry(drm_proc_list[i].name, + minor->dev_root); + remove_proc_entry(name, root); + minor->dev_root = NULL; + return ret; } /** @@ -133,12 +160,16 @@ int drm_proc_init(struct drm_minor *minor, int minor_id, */ int drm_proc_cleanup(struct drm_minor *minor, struct proc_dir_entry *root) { + struct drm_device *dev = minor->dev; int i; char name[64]; if (!root || !minor->dev_root) return 0; + if (dev->driver->proc_cleanup) + dev->driver->proc_cleanup(minor); + for (i = 0; i < DRM_PROC_ENTRIES; i++) remove_proc_entry(drm_proc_list[i].name, minor->dev_root); sprintf(name, "%d", minor->index); @@ -480,6 +511,84 @@ static int drm_clients_info(char *buf, char **start, off_t offset, return ret; } +struct drm_gem_name_info_data { + int len; + char *buf; + int eof; +}; + +static int drm_gem_one_name_info(int id, void *ptr, void *data) +{ + struct drm_gem_object *obj = ptr; + struct drm_gem_name_info_data *nid = data; + + DRM_INFO("name %d size %d\n", obj->name, obj->size); + if (nid->eof) + return 0; + + nid->len += sprintf(&nid->buf[nid->len], + "%6d%9d%8d%9d\n", + obj->name, obj->size, + atomic_read(&obj->handlecount.refcount), + atomic_read(&obj->refcount.refcount)); + if (nid->len > DRM_PROC_LIMIT) { + nid->eof = 1; + return 0; + } + return 0; +} + +static int drm_gem_name_info(char *buf, char **start, off_t offset, + int request, int *eof, void *data) +{ + struct drm_minor *minor = (struct drm_minor *) data; + struct drm_device *dev = minor->dev; + struct drm_gem_name_info_data nid; + + if (offset > DRM_PROC_LIMIT) { + *eof = 1; + return 0; + } + + nid.len = sprintf(buf, " name size handles refcount\n"); + nid.buf = buf; + nid.eof = 0; + idr_for_each(&dev->object_name_idr, drm_gem_one_name_info, &nid); + + *start = &buf[offset]; + *eof = 0; + if (nid.len > request + offset) + return request; + *eof = 1; + return nid.len - offset; +} + +static int drm_gem_object_info(char *buf, char **start, off_t offset, + int request, int *eof, void *data) +{ + struct drm_minor *minor = (struct drm_minor *) data; + struct drm_device *dev = minor->dev; + int len = 0; + + if (offset > DRM_PROC_LIMIT) { + *eof = 1; + return 0; + } + + *start = &buf[offset]; + *eof = 0; + DRM_PROC_PRINT("%d objects\n", atomic_read(&dev->object_count)); + DRM_PROC_PRINT("%d object bytes\n", atomic_read(&dev->object_memory)); + DRM_PROC_PRINT("%d pinned\n", atomic_read(&dev->pin_count)); + DRM_PROC_PRINT("%d pin bytes\n", atomic_read(&dev->pin_memory)); + DRM_PROC_PRINT("%d gtt bytes\n", atomic_read(&dev->gtt_memory)); + DRM_PROC_PRINT("%d gtt total\n", dev->gtt_total); + if (len > request + offset) + return request; + *eof = 1; + return len - offset; +} + #if DRM_DEBUG_CODE static int drm__vma_info(char *buf, char **start, off_t offset, int request, diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c index c2f584f3b46c..141e33004a76 100644 --- a/drivers/gpu/drm/drm_stub.c +++ b/drivers/gpu/drm/drm_stub.c @@ -107,7 +107,6 @@ static int drm_fill_in_dev(struct drm_device * dev, struct pci_dev *pdev, #ifdef __alpha__ dev->hose = pdev->sysdata; #endif - dev->irq = pdev->irq; if (drm_ht_create(&dev->map_hash, 12)) { return -ENOMEM; @@ -152,6 +151,15 @@ static int drm_fill_in_dev(struct drm_device * dev, struct pci_dev *pdev, goto error_out_unreg; } + if (driver->driver_features & DRIVER_GEM) { + retcode = drm_gem_init(dev); + if (retcode) { + DRM_ERROR("Cannot initialize graphics execution " + "manager (GEM)\n"); + goto error_out_unreg; + } + } + return 0; error_out_unreg: @@ -317,6 +325,7 @@ int drm_put_dev(struct drm_device * dev) int drm_put_minor(struct drm_minor **minor_p) { struct drm_minor *minor = *minor_p; + DRM_DEBUG("release secondary minor %d\n", minor->index); if (minor->type == DRM_MINOR_LEGACY) diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c index af211a0ef179..1611b9bcbe7f 100644 --- a/drivers/gpu/drm/drm_sysfs.c +++ b/drivers/gpu/drm/drm_sysfs.c @@ -184,7 +184,7 @@ int drm_sysfs_device_add(struct drm_minor *minor) err_out_files: if (i > 0) for (j = 0; j < i; j++) - device_remove_file(&minor->kdev, &device_attrs[i]); + device_remove_file(&minor->kdev, &device_attrs[j]); device_unregister(&minor->kdev); err_out: diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile index a9e60464df74..5ba78e4fd2b5 100644 --- a/drivers/gpu/drm/i915/Makefile +++ b/drivers/gpu/drm/i915/Makefile @@ -3,7 +3,12 @@ # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher. ccflags-y := -Iinclude/drm -i915-y := i915_drv.o i915_dma.o i915_irq.o i915_mem.o +i915-y := i915_drv.o i915_dma.o i915_irq.o i915_mem.o i915_opregion.o \ + i915_suspend.o \ + i915_gem.o \ + i915_gem_debug.o \ + i915_gem_proc.o \ + i915_gem_tiling.o i915-$(CONFIG_COMPAT) += i915_ioc32.o diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 9ac4720e647b..db34780edbb2 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -40,40 +40,96 @@ int i915_wait_ring(struct drm_device * dev, int n, const char *caller) { drm_i915_private_t *dev_priv = dev->dev_private; drm_i915_ring_buffer_t *ring = &(dev_priv->ring); - u32 last_head = I915_READ(LP_RING + RING_HEAD) & HEAD_ADDR; + u32 acthd_reg = IS_I965G(dev) ? ACTHD_I965 : ACTHD; + u32 last_acthd = I915_READ(acthd_reg); + u32 acthd; + u32 last_head = I915_READ(PRB0_HEAD) & HEAD_ADDR; int i; - for (i = 0; i < 10000; i++) { - ring->head = I915_READ(LP_RING + RING_HEAD) & HEAD_ADDR; + for (i = 0; i < 100000; i++) { + ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR; + acthd = I915_READ(acthd_reg); ring->space = ring->head - (ring->tail + 8); if (ring->space < 0) ring->space += ring->Size; if (ring->space >= n) return 0; - dev_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT; + if (dev_priv->sarea_priv) + dev_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT; if (ring->head != last_head) i = 0; + if (acthd != last_acthd) + i = 0; last_head = ring->head; + last_acthd = acthd; + msleep_interruptible(10); + } return -EBUSY; } +/** + * Sets up the hardware status page for devices that need a physical address + * in the register. + */ +static int i915_init_phys_hws(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + /* Program Hardware Status Page */ + dev_priv->status_page_dmah = + drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE, 0xffffffff); + + if (!dev_priv->status_page_dmah) { + DRM_ERROR("Can not allocate hardware status page\n"); + return -ENOMEM; + } + dev_priv->hw_status_page = dev_priv->status_page_dmah->vaddr; + dev_priv->dma_status_page = dev_priv->status_page_dmah->busaddr; + + memset(dev_priv->hw_status_page, 0, PAGE_SIZE); + + I915_WRITE(HWS_PGA, dev_priv->dma_status_page); + DRM_DEBUG("Enabled hardware status page\n"); + return 0; +} + +/** + * Frees the hardware status page, whether it's a physical address or a virtual + * address set up by the X Server. + */ +static void i915_free_hws(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + if (dev_priv->status_page_dmah) { + drm_pci_free(dev, dev_priv->status_page_dmah); + dev_priv->status_page_dmah = NULL; + } + + if (dev_priv->status_gfx_addr) { + dev_priv->status_gfx_addr = 0; + drm_core_ioremapfree(&dev_priv->hws_map, dev); + } + + /* Need to rewrite hardware status page */ + I915_WRITE(HWS_PGA, 0x1ffff000); +} + void i915_kernel_lost_context(struct drm_device * dev) { drm_i915_private_t *dev_priv = dev->dev_private; drm_i915_ring_buffer_t *ring = &(dev_priv->ring); - ring->head = I915_READ(LP_RING + RING_HEAD) & HEAD_ADDR; - ring->tail = I915_READ(LP_RING + RING_TAIL) & TAIL_ADDR; + ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR; + ring->tail = I915_READ(PRB0_TAIL) & TAIL_ADDR; ring->space = ring->head - (ring->tail + 8); if (ring->space < 0) ring->space += ring->Size; - if (ring->head == ring->tail) + if (ring->head == ring->tail && dev_priv->sarea_priv) dev_priv->sarea_priv->perf_boxes |= I915_BOX_RING_EMPTY; } @@ -84,28 +140,19 @@ static int i915_dma_cleanup(struct drm_device * dev) * may not have been called from userspace and after dev_private * is freed, it's too late. */ - if (dev->irq) + if (dev->irq_enabled) drm_irq_uninstall(dev); if (dev_priv->ring.virtual_start) { drm_core_ioremapfree(&dev_priv->ring.map, dev); - dev_priv->ring.virtual_start = 0; - dev_priv->ring.map.handle = 0; + dev_priv->ring.virtual_start = NULL; + dev_priv->ring.map.handle = NULL; dev_priv->ring.map.size = 0; } - if (dev_priv->status_page_dmah) { - drm_pci_free(dev, dev_priv->status_page_dmah); - dev_priv->status_page_dmah = NULL; - /* Need to rewrite hardware status page */ - I915_WRITE(0x02080, 0x1ffff000); - } - - if (dev_priv->status_gfx_addr) { - dev_priv->status_gfx_addr = 0; - drm_core_ioremapfree(&dev_priv->hws_map, dev); - I915_WRITE(0x2080, 0x1ffff000); - } + /* Clear the HWS virtual address at teardown */ + if (I915_NEED_GFX_HWS(dev)) + i915_free_hws(dev); return 0; } @@ -121,34 +168,34 @@ static int i915_initialize(struct drm_device * dev, drm_i915_init_t * init) return -EINVAL; } - dev_priv->mmio_map = drm_core_findmap(dev, init->mmio_offset); - if (!dev_priv->mmio_map) { - i915_dma_cleanup(dev); - DRM_ERROR("can not find mmio map!\n"); - return -EINVAL; - } - dev_priv->sarea_priv = (drm_i915_sarea_t *) ((u8 *) dev_priv->sarea->handle + init->sarea_priv_offset); - dev_priv->ring.Start = init->ring_start; - dev_priv->ring.End = init->ring_end; - dev_priv->ring.Size = init->ring_size; - dev_priv->ring.tail_mask = dev_priv->ring.Size - 1; + if (init->ring_size != 0) { + if (dev_priv->ring.ring_obj != NULL) { + i915_dma_cleanup(dev); + DRM_ERROR("Client tried to initialize ringbuffer in " + "GEM mode\n"); + return -EINVAL; + } - dev_priv->ring.map.offset = init->ring_start; - dev_priv->ring.map.size = init->ring_size; - dev_priv->ring.map.type = 0; - dev_priv->ring.map.flags = 0; - dev_priv->ring.map.mtrr = 0; + dev_priv->ring.Size = init->ring_size; + dev_priv->ring.tail_mask = dev_priv->ring.Size - 1; - drm_core_ioremap(&dev_priv->ring.map, dev); + dev_priv->ring.map.offset = init->ring_start; + dev_priv->ring.map.size = init->ring_size; + dev_priv->ring.map.type = 0; + dev_priv->ring.map.flags = 0; + dev_priv->ring.map.mtrr = 0; - if (dev_priv->ring.map.handle == NULL) { - i915_dma_cleanup(dev); - DRM_ERROR("can not ioremap virtual address for" - " ring buffer\n"); - return -ENOMEM; + drm_core_ioremap(&dev_priv->ring.map, dev); + + if (dev_priv->ring.map.handle == NULL) { + i915_dma_cleanup(dev); + DRM_ERROR("can not ioremap virtual address for" + " ring buffer\n"); + return -ENOMEM; + } } dev_priv->ring.virtual_start = dev_priv->ring.map.handle; @@ -159,34 +206,10 @@ static int i915_initialize(struct drm_device * dev, drm_i915_init_t * init) dev_priv->current_page = 0; dev_priv->sarea_priv->pf_current_page = dev_priv->current_page; - /* We are using separate values as placeholders for mechanisms for - * private backbuffer/depthbuffer usage. - */ - dev_priv->use_mi_batchbuffer_start = 0; - if (IS_I965G(dev)) /* 965 doesn't support older method */ - dev_priv->use_mi_batchbuffer_start = 1; - /* Allow hardware batchbuffers unless told otherwise. */ dev_priv->allow_batchbuffer = 1; - /* Program Hardware Status Page */ - if (!I915_NEED_GFX_HWS(dev)) { - dev_priv->status_page_dmah = - drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE, 0xffffffff); - - if (!dev_priv->status_page_dmah) { - i915_dma_cleanup(dev); - DRM_ERROR("Can not allocate hardware status page\n"); - return -ENOMEM; - } - dev_priv->hw_status_page = dev_priv->status_page_dmah->vaddr; - dev_priv->dma_status_page = dev_priv->status_page_dmah->busaddr; - - memset(dev_priv->hw_status_page, 0, PAGE_SIZE); - I915_WRITE(0x02080, dev_priv->dma_status_page); - } - DRM_DEBUG("Enabled hardware status page\n"); return 0; } @@ -201,11 +224,6 @@ static int i915_dma_resume(struct drm_device * dev) return -EINVAL; } - if (!dev_priv->mmio_map) { - DRM_ERROR("can not find mmio map!\n"); - return -EINVAL; - } - if (dev_priv->ring.map.handle == NULL) { DRM_ERROR("can not ioremap virtual address for" " ring buffer\n"); @@ -220,9 +238,9 @@ static int i915_dma_resume(struct drm_device * dev) DRM_DEBUG("hw status page @ %p\n", dev_priv->hw_status_page); if (dev_priv->status_gfx_addr != 0) - I915_WRITE(0x02080, dev_priv->status_gfx_addr); + I915_WRITE(HWS_PGA, dev_priv->status_gfx_addr); else - I915_WRITE(0x02080, dev_priv->dma_status_page); + I915_WRITE(HWS_PGA, dev_priv->dma_status_page); DRM_DEBUG("Enabled hardware status page\n"); return 0; @@ -367,9 +385,10 @@ static int i915_emit_cmds(struct drm_device * dev, int __user * buffer, int dwor return 0; } -static int i915_emit_box(struct drm_device * dev, - struct drm_clip_rect __user * boxes, - int i, int DR1, int DR4) +int +i915_emit_box(struct drm_device *dev, + struct drm_clip_rect __user *boxes, + int i, int DR1, int DR4) { drm_i915_private_t *dev_priv = dev->dev_private; struct drm_clip_rect box; @@ -415,14 +434,15 @@ static void i915_emit_breadcrumb(struct drm_device *dev) drm_i915_private_t *dev_priv = dev->dev_private; RING_LOCALS; - dev_priv->sarea_priv->last_enqueue = ++dev_priv->counter; - + dev_priv->counter++; if (dev_priv->counter > 0x7FFFFFFFUL) - dev_priv->sarea_priv->last_enqueue = dev_priv->counter = 1; + dev_priv->counter = 0; + if (dev_priv->sarea_priv) + dev_priv->sarea_priv->last_enqueue = dev_priv->counter; BEGIN_LP_RING(4); - OUT_RING(CMD_STORE_DWORD_IDX); - OUT_RING(20); + OUT_RING(MI_STORE_DWORD_INDEX); + OUT_RING(5 << MI_STORE_DWORD_INDEX_SHIFT); OUT_RING(dev_priv->counter); OUT_RING(0); ADVANCE_LP_RING(); @@ -486,7 +506,7 @@ static int i915_dispatch_batchbuffer(struct drm_device * dev, return ret; } - if (dev_priv->use_mi_batchbuffer_start) { + if (!IS_I830(dev) && !IS_845G(dev)) { BEGIN_LP_RING(2); if (IS_I965G(dev)) { OUT_RING(MI_BATCH_BUFFER_START | (2 << 6) | MI_BATCH_NON_SECURE_I965); @@ -516,6 +536,9 @@ static int i915_dispatch_flip(struct drm_device * dev) drm_i915_private_t *dev_priv = dev->dev_private; RING_LOCALS; + if (!dev_priv->sarea_priv) + return -EINVAL; + DRM_DEBUG("%s: page=%d pfCurrentPage=%d\n", __func__, dev_priv->current_page, @@ -524,7 +547,7 @@ static int i915_dispatch_flip(struct drm_device * dev) i915_kernel_lost_context(dev); BEGIN_LP_RING(2); - OUT_RING(INST_PARSER_CLIENT | INST_OP_FLUSH | INST_FLUSH_MAP_CACHE); + OUT_RING(MI_FLUSH | MI_READ_FLUSH); OUT_RING(0); ADVANCE_LP_RING(); @@ -549,8 +572,8 @@ static int i915_dispatch_flip(struct drm_device * dev) dev_priv->sarea_priv->last_enqueue = dev_priv->counter++; BEGIN_LP_RING(4); - OUT_RING(CMD_STORE_DWORD_IDX); - OUT_RING(20); + OUT_RING(MI_STORE_DWORD_INDEX); + OUT_RING(5 << MI_STORE_DWORD_INDEX_SHIFT); OUT_RING(dev_priv->counter); OUT_RING(0); ADVANCE_LP_RING(); @@ -570,9 +593,15 @@ static int i915_quiescent(struct drm_device * dev) static int i915_flush_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { - LOCK_TEST_WITH_RETURN(dev, file_priv); + int ret; + + RING_LOCK_TEST_WITH_RETURN(dev, file_priv); + + mutex_lock(&dev->struct_mutex); + ret = i915_quiescent(dev); + mutex_unlock(&dev->struct_mutex); - return i915_quiescent(dev); + return ret; } static int i915_batchbuffer(struct drm_device *dev, void *data, @@ -593,16 +622,19 @@ static int i915_batchbuffer(struct drm_device *dev, void *data, DRM_DEBUG("i915 batchbuffer, start %x used %d cliprects %d\n", batch->start, batch->used, batch->num_cliprects); - LOCK_TEST_WITH_RETURN(dev, file_priv); + RING_LOCK_TEST_WITH_RETURN(dev, file_priv); if (batch->num_cliprects && DRM_VERIFYAREA_READ(batch->cliprects, batch->num_cliprects * sizeof(struct drm_clip_rect))) return -EFAULT; + mutex_lock(&dev->struct_mutex); ret = i915_dispatch_batchbuffer(dev, batch); + mutex_unlock(&dev->struct_mutex); - sarea_priv->last_dispatch = (int)hw_status[5]; + if (sarea_priv) + sarea_priv->last_dispatch = (int)hw_status[5]; return ret; } @@ -619,7 +651,7 @@ static int i915_cmdbuffer(struct drm_device *dev, void *data, DRM_DEBUG("i915 cmdbuffer, buf %p sz %d cliprects %d\n", cmdbuf->buf, cmdbuf->sz, cmdbuf->num_cliprects); - LOCK_TEST_WITH_RETURN(dev, file_priv); + RING_LOCK_TEST_WITH_RETURN(dev, file_priv); if (cmdbuf->num_cliprects && DRM_VERIFYAREA_READ(cmdbuf->cliprects, @@ -629,24 +661,33 @@ static int i915_cmdbuffer(struct drm_device *dev, void *data, return -EFAULT; } + mutex_lock(&dev->struct_mutex); ret = i915_dispatch_cmdbuffer(dev, cmdbuf); + mutex_unlock(&dev->struct_mutex); if (ret) { DRM_ERROR("i915_dispatch_cmdbuffer failed\n"); return ret; } - sarea_priv->last_dispatch = (int)hw_status[5]; + if (sarea_priv) + sarea_priv->last_dispatch = (int)hw_status[5]; return 0; } static int i915_flip_bufs(struct drm_device *dev, void *data, struct drm_file *file_priv) { + int ret; + DRM_DEBUG("%s\n", __func__); - LOCK_TEST_WITH_RETURN(dev, file_priv); + RING_LOCK_TEST_WITH_RETURN(dev, file_priv); + + mutex_lock(&dev->struct_mutex); + ret = i915_dispatch_flip(dev); + mutex_unlock(&dev->struct_mutex); - return i915_dispatch_flip(dev); + return ret; } static int i915_getparam(struct drm_device *dev, void *data, @@ -663,7 +704,7 @@ static int i915_getparam(struct drm_device *dev, void *data, switch (param->param) { case I915_PARAM_IRQ_ACTIVE: - value = dev->irq ? 1 : 0; + value = dev->pdev->irq ? 1 : 0; break; case I915_PARAM_ALLOW_BATCHBUFFER: value = dev_priv->allow_batchbuffer ? 1 : 0; @@ -671,6 +712,12 @@ static int i915_getparam(struct drm_device *dev, void *data, case I915_PARAM_LAST_DISPATCH: value = READ_BREADCRUMB(dev_priv); break; + case I915_PARAM_CHIPSET_ID: + value = dev->pci_device; + break; + case I915_PARAM_HAS_GEM: + value = 1; + break; default: DRM_ERROR("Unknown parameter %d\n", param->param); return -EINVAL; @@ -697,8 +744,6 @@ static int i915_setparam(struct drm_device *dev, void *data, switch (param->param) { case I915_SETPARAM_USE_MI_BATCHBUFFER_START: - if (!IS_I965G(dev)) - dev_priv->use_mi_batchbuffer_start = param->value; break; case I915_SETPARAM_TEX_LRU_LOG_GRANULARITY: dev_priv->tex_lru_log_granularity = param->value; @@ -749,8 +794,8 @@ static int i915_set_status_page(struct drm_device *dev, void *data, dev_priv->hw_status_page = dev_priv->hws_map.handle; memset(dev_priv->hw_status_page, 0, PAGE_SIZE); - I915_WRITE(0x02080, dev_priv->status_gfx_addr); - DRM_DEBUG("load hws 0x2080 with gfx mem 0x%x\n", + I915_WRITE(HWS_PGA, dev_priv->status_gfx_addr); + DRM_DEBUG("load hws HWS_PGA with gfx mem 0x%x\n", dev_priv->status_gfx_addr); DRM_DEBUG("load hws at %p\n", dev_priv->hw_status_page); return 0; @@ -776,14 +821,38 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) memset(dev_priv, 0, sizeof(drm_i915_private_t)); dev->dev_private = (void *)dev_priv; + dev_priv->dev = dev; /* Add register map (needed for suspend/resume) */ base = drm_get_resource_start(dev, mmio_bar); size = drm_get_resource_len(dev, mmio_bar); - ret = drm_addmap(dev, base, size, _DRM_REGISTERS, - _DRM_KERNEL | _DRM_DRIVER, - &dev_priv->mmio_map); + dev_priv->regs = ioremap(base, size); + + i915_gem_load(dev); + + /* Init HWS */ + if (!I915_NEED_GFX_HWS(dev)) { + ret = i915_init_phys_hws(dev); + if (ret != 0) + return ret; + } + + /* On the 945G/GM, the chipset reports the MSI capability on the + * integrated graphics even though the support isn't actually there + * according to the published specs. It doesn't appear to function + * correctly in testing on 945G. + * This may be a side effect of MSI having been made available for PEG + * and the registers being closely associated. + */ + if (!IS_I945G(dev) && !IS_I945GM(dev)) + if (pci_enable_msi(dev->pdev)) + DRM_ERROR("failed to enable MSI\n"); + + intel_opregion_init(dev); + + spin_lock_init(&dev_priv->user_irq_lock); + return ret; } @@ -791,8 +860,15 @@ int i915_driver_unload(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - if (dev_priv->mmio_map) - drm_rmmap(dev, dev_priv->mmio_map); + if (dev->pdev->msi_enabled) + pci_disable_msi(dev->pdev); + + i915_free_hws(dev); + + if (dev_priv->regs != NULL) + iounmap(dev_priv->regs); + + intel_opregion_free(dev); drm_free(dev->dev_private, sizeof(drm_i915_private_t), DRM_MEM_DRIVER); @@ -800,6 +876,25 @@ int i915_driver_unload(struct drm_device *dev) return 0; } +int i915_driver_open(struct drm_device *dev, struct drm_file *file_priv) +{ + struct drm_i915_file_private *i915_file_priv; + + DRM_DEBUG("\n"); + i915_file_priv = (struct drm_i915_file_private *) + drm_alloc(sizeof(*i915_file_priv), DRM_MEM_FILES); + + if (!i915_file_priv) + return -ENOMEM; + + file_priv->driver_priv = i915_file_priv; + + i915_file_priv->mm.last_gem_seqno = 0; + i915_file_priv->mm.last_gem_throttle_seqno = 0; + + return 0; +} + void i915_driver_lastclose(struct drm_device * dev) { drm_i915_private_t *dev_priv = dev->dev_private; @@ -807,6 +902,8 @@ void i915_driver_lastclose(struct drm_device * dev) if (!dev_priv) return; + i915_gem_lastclose(dev); + if (dev_priv->agp_heap) i915_mem_takedown(&(dev_priv->agp_heap)); @@ -819,6 +916,13 @@ void i915_driver_preclose(struct drm_device * dev, struct drm_file *file_priv) i915_mem_release(dev, file_priv, dev_priv->agp_heap); } +void i915_driver_postclose(struct drm_device *dev, struct drm_file *file_priv) +{ + struct drm_i915_file_private *i915_file_priv = file_priv->driver_priv; + + drm_free(i915_file_priv, sizeof(*i915_file_priv), DRM_MEM_FILES); +} + struct drm_ioctl_desc i915_ioctls[] = { DRM_IOCTL_DEF(DRM_I915_INIT, i915_dma_init, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), DRM_IOCTL_DEF(DRM_I915_FLUSH, i915_flush_ioctl, DRM_AUTH), @@ -836,7 +940,23 @@ struct drm_ioctl_desc i915_ioctls[] = { DRM_IOCTL_DEF(DRM_I915_SET_VBLANK_PIPE, i915_vblank_pipe_set, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY ), DRM_IOCTL_DEF(DRM_I915_GET_VBLANK_PIPE, i915_vblank_pipe_get, DRM_AUTH ), DRM_IOCTL_DEF(DRM_I915_VBLANK_SWAP, i915_vblank_swap, DRM_AUTH), - DRM_IOCTL_DEF(DRM_I915_HWS_ADDR, i915_set_status_page, DRM_AUTH), + DRM_IOCTL_DEF(DRM_I915_HWS_ADDR, i915_set_status_page, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), + DRM_IOCTL_DEF(DRM_I915_GEM_INIT, i915_gem_init_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), + DRM_IOCTL_DEF(DRM_I915_GEM_EXECBUFFER, i915_gem_execbuffer, DRM_AUTH), + DRM_IOCTL_DEF(DRM_I915_GEM_PIN, i915_gem_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY), + DRM_IOCTL_DEF(DRM_I915_GEM_UNPIN, i915_gem_unpin_ioctl, DRM_AUTH|DRM_ROOT_ONLY), + DRM_IOCTL_DEF(DRM_I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH), + DRM_IOCTL_DEF(DRM_I915_GEM_THROTTLE, i915_gem_throttle_ioctl, DRM_AUTH), + DRM_IOCTL_DEF(DRM_I915_GEM_ENTERVT, i915_gem_entervt_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), + DRM_IOCTL_DEF(DRM_I915_GEM_LEAVEVT, i915_gem_leavevt_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), + DRM_IOCTL_DEF(DRM_I915_GEM_CREATE, i915_gem_create_ioctl, 0), + DRM_IOCTL_DEF(DRM_I915_GEM_PREAD, i915_gem_pread_ioctl, 0), + DRM_IOCTL_DEF(DRM_I915_GEM_PWRITE, i915_gem_pwrite_ioctl, 0), + DRM_IOCTL_DEF(DRM_I915_GEM_MMAP, i915_gem_mmap_ioctl, 0), + DRM_IOCTL_DEF(DRM_I915_GEM_SET_DOMAIN, i915_gem_set_domain_ioctl, 0), + DRM_IOCTL_DEF(DRM_I915_GEM_SW_FINISH, i915_gem_sw_finish_ioctl, 0), + DRM_IOCTL_DEF(DRM_I915_GEM_SET_TILING, i915_gem_set_tiling, 0), + DRM_IOCTL_DEF(DRM_I915_GEM_GET_TILING, i915_gem_get_tiling, 0), }; int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls); diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 93aed1c38bd2..a80ead215282 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -38,211 +38,9 @@ static struct pci_device_id pciidlist[] = { i915_PCI_IDS }; -enum pipe { - PIPE_A = 0, - PIPE_B, -}; - -static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - - if (pipe == PIPE_A) - return (I915_READ(DPLL_A) & DPLL_VCO_ENABLE); - else - return (I915_READ(DPLL_B) & DPLL_VCO_ENABLE); -} - -static void i915_save_palette(struct drm_device *dev, enum pipe pipe) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - unsigned long reg = (pipe == PIPE_A ? PALETTE_A : PALETTE_B); - u32 *array; - int i; - - if (!i915_pipe_enabled(dev, pipe)) - return; - - if (pipe == PIPE_A) - array = dev_priv->save_palette_a; - else - array = dev_priv->save_palette_b; - - for(i = 0; i < 256; i++) - array[i] = I915_READ(reg + (i << 2)); -} - -static void i915_restore_palette(struct drm_device *dev, enum pipe pipe) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - unsigned long reg = (pipe == PIPE_A ? PALETTE_A : PALETTE_B); - u32 *array; - int i; - - if (!i915_pipe_enabled(dev, pipe)) - return; - - if (pipe == PIPE_A) - array = dev_priv->save_palette_a; - else - array = dev_priv->save_palette_b; - - for(i = 0; i < 256; i++) - I915_WRITE(reg + (i << 2), array[i]); -} - -static u8 i915_read_indexed(u16 index_port, u16 data_port, u8 reg) -{ - outb(reg, index_port); - return inb(data_port); -} - -static u8 i915_read_ar(u16 st01, u8 reg, u16 palette_enable) -{ - inb(st01); - outb(palette_enable | reg, VGA_AR_INDEX); - return inb(VGA_AR_DATA_READ); -} - -static void i915_write_ar(u8 st01, u8 reg, u8 val, u16 palette_enable) -{ - inb(st01); - outb(palette_enable | reg, VGA_AR_INDEX); - outb(val, VGA_AR_DATA_WRITE); -} - -static void i915_write_indexed(u16 index_port, u16 data_port, u8 reg, u8 val) -{ - outb(reg, index_port); - outb(val, data_port); -} - -static void i915_save_vga(struct drm_device *dev) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - int i; - u16 cr_index, cr_data, st01; - - /* VGA color palette registers */ - dev_priv->saveDACMASK = inb(VGA_DACMASK); - /* DACCRX automatically increments during read */ - outb(0, VGA_DACRX); - /* Read 3 bytes of color data from each index */ - for (i = 0; i < 256 * 3; i++) - dev_priv->saveDACDATA[i] = inb(VGA_DACDATA); - - /* MSR bits */ - dev_priv->saveMSR = inb(VGA_MSR_READ); - if (dev_priv->saveMSR & VGA_MSR_CGA_MODE) { - cr_index = VGA_CR_INDEX_CGA; - cr_data = VGA_CR_DATA_CGA; - st01 = VGA_ST01_CGA; - } else { - cr_index = VGA_CR_INDEX_MDA; - cr_data = VGA_CR_DATA_MDA; - st01 = VGA_ST01_MDA; - } - - /* CRT controller regs */ - i915_write_indexed(cr_index, cr_data, 0x11, - i915_read_indexed(cr_index, cr_data, 0x11) & - (~0x80)); - for (i = 0; i <= 0x24; i++) - dev_priv->saveCR[i] = - i915_read_indexed(cr_index, cr_data, i); - /* Make sure we don't turn off CR group 0 writes */ - dev_priv->saveCR[0x11] &= ~0x80; - - /* Attribute controller registers */ - inb(st01); - dev_priv->saveAR_INDEX = inb(VGA_AR_INDEX); - for (i = 0; i <= 0x14; i++) - dev_priv->saveAR[i] = i915_read_ar(st01, i, 0); - inb(st01); - outb(dev_priv->saveAR_INDEX, VGA_AR_INDEX); - inb(st01); - - /* Graphics controller registers */ - for (i = 0; i < 9; i++) - dev_priv->saveGR[i] = - i915_read_indexed(VGA_GR_INDEX, VGA_GR_DATA, i); - - dev_priv->saveGR[0x10] = - i915_read_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x10); - dev_priv->saveGR[0x11] = - i915_read_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x11); - dev_priv->saveGR[0x18] = - i915_read_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x18); - - /* Sequencer registers */ - for (i = 0; i < 8; i++) - dev_priv->saveSR[i] = - i915_read_indexed(VGA_SR_INDEX, VGA_SR_DATA, i); -} - -static void i915_restore_vga(struct drm_device *dev) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - int i; - u16 cr_index, cr_data, st01; - - /* MSR bits */ - outb(dev_priv->saveMSR, VGA_MSR_WRITE); - if (dev_priv->saveMSR & VGA_MSR_CGA_MODE) { - cr_index = VGA_CR_INDEX_CGA; - cr_data = VGA_CR_DATA_CGA; - st01 = VGA_ST01_CGA; - } else { - cr_index = VGA_CR_INDEX_MDA; - cr_data = VGA_CR_DATA_MDA; - st01 = VGA_ST01_MDA; - } - - /* Sequencer registers, don't write SR07 */ - for (i = 0; i < 7; i++) - i915_write_indexed(VGA_SR_INDEX, VGA_SR_DATA, i, - dev_priv->saveSR[i]); - - /* CRT controller regs */ - /* Enable CR group 0 writes */ - i915_write_indexed(cr_index, cr_data, 0x11, dev_priv->saveCR[0x11]); - for (i = 0; i <= 0x24; i++) - i915_write_indexed(cr_index, cr_data, i, dev_priv->saveCR[i]); - - /* Graphics controller regs */ - for (i = 0; i < 9; i++) - i915_write_indexed(VGA_GR_INDEX, VGA_GR_DATA, i, - dev_priv->saveGR[i]); - - i915_write_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x10, - dev_priv->saveGR[0x10]); - i915_write_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x11, - dev_priv->saveGR[0x11]); - i915_write_indexed(VGA_GR_INDEX, VGA_GR_DATA, 0x18, - dev_priv->saveGR[0x18]); - - /* Attribute controller registers */ - inb(st01); - for (i = 0; i <= 0x14; i++) - i915_write_ar(st01, i, dev_priv->saveAR[i], 0); - inb(st01); /* switch back to index mode */ - outb(dev_priv->saveAR_INDEX | 0x20, VGA_AR_INDEX); - inb(st01); - - /* VGA color palette registers */ - outb(dev_priv->saveDACMASK, VGA_DACMASK); - /* DACCRX automatically increments during read */ - outb(0, VGA_DACWX); - /* Read 3 bytes of color data from each index */ - for (i = 0; i < 256 * 3; i++) - outb(dev_priv->saveDACDATA[i], VGA_DACDATA); - -} - static int i915_suspend(struct drm_device *dev, pm_message_t state) { struct drm_i915_private *dev_priv = dev->dev_private; - int i; if (!dev || !dev_priv) { printk(KERN_ERR "dev: %p, dev_priv: %p\n", dev, dev_priv); @@ -254,122 +52,10 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state) return 0; pci_save_state(dev->pdev); - pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB); - - /* Display arbitration control */ - dev_priv->saveDSPARB = I915_READ(DSPARB); - - /* Pipe & plane A info */ - dev_priv->savePIPEACONF = I915_READ(PIPEACONF); - dev_priv->savePIPEASRC = I915_READ(PIPEASRC); - dev_priv->saveFPA0 = I915_READ(FPA0); - dev_priv->saveFPA1 = I915_READ(FPA1); - dev_priv->saveDPLL_A = I915_READ(DPLL_A); - if (IS_I965G(dev)) - dev_priv->saveDPLL_A_MD = I915_READ(DPLL_A_MD); - dev_priv->saveHTOTAL_A = I915_READ(HTOTAL_A); - dev_priv->saveHBLANK_A = I915_READ(HBLANK_A); - dev_priv->saveHSYNC_A = I915_READ(HSYNC_A); - dev_priv->saveVTOTAL_A = I915_READ(VTOTAL_A); - dev_priv->saveVBLANK_A = I915_READ(VBLANK_A); - dev_priv->saveVSYNC_A = I915_READ(VSYNC_A); - dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A); - - dev_priv->saveDSPACNTR = I915_READ(DSPACNTR); - dev_priv->saveDSPASTRIDE = I915_READ(DSPASTRIDE); - dev_priv->saveDSPASIZE = I915_READ(DSPASIZE); - dev_priv->saveDSPAPOS = I915_READ(DSPAPOS); - dev_priv->saveDSPABASE = I915_READ(DSPABASE); - if (IS_I965G(dev)) { - dev_priv->saveDSPASURF = I915_READ(DSPASURF); - dev_priv->saveDSPATILEOFF = I915_READ(DSPATILEOFF); - } - i915_save_palette(dev, PIPE_A); - dev_priv->savePIPEASTAT = I915_READ(I915REG_PIPEASTAT); - - /* Pipe & plane B info */ - dev_priv->savePIPEBCONF = I915_READ(PIPEBCONF); - dev_priv->savePIPEBSRC = I915_READ(PIPEBSRC); - dev_priv->saveFPB0 = I915_READ(FPB0); - dev_priv->saveFPB1 = I915_READ(FPB1); - dev_priv->saveDPLL_B = I915_READ(DPLL_B); - if (IS_I965G(dev)) - dev_priv->saveDPLL_B_MD = I915_READ(DPLL_B_MD); - dev_priv->saveHTOTAL_B = I915_READ(HTOTAL_B); - dev_priv->saveHBLANK_B = I915_READ(HBLANK_B); - dev_priv->saveHSYNC_B = I915_READ(HSYNC_B); - dev_priv->saveVTOTAL_B = I915_READ(VTOTAL_B); - dev_priv->saveVBLANK_B = I915_READ(VBLANK_B); - dev_priv->saveVSYNC_B = I915_READ(VSYNC_B); - dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A); - - dev_priv->saveDSPBCNTR = I915_READ(DSPBCNTR); - dev_priv->saveDSPBSTRIDE = I915_READ(DSPBSTRIDE); - dev_priv->saveDSPBSIZE = I915_READ(DSPBSIZE); - dev_priv->saveDSPBPOS = I915_READ(DSPBPOS); - dev_priv->saveDSPBBASE = I915_READ(DSPBBASE); - if (IS_I965GM(dev) || IS_IGD_GM(dev)) { - dev_priv->saveDSPBSURF = I915_READ(DSPBSURF); - dev_priv->saveDSPBTILEOFF = I915_READ(DSPBTILEOFF); - } - i915_save_palette(dev, PIPE_B); - dev_priv->savePIPEBSTAT = I915_READ(I915REG_PIPEBSTAT); - /* CRT state */ - dev_priv->saveADPA = I915_READ(ADPA); + i915_save_state(dev); - /* LVDS state */ - dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL); - dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS); - dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL); - if (IS_I965G(dev)) - dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2); - if (IS_MOBILE(dev) && !IS_I830(dev)) - dev_priv->saveLVDS = I915_READ(LVDS); - if (!IS_I830(dev) && !IS_845G(dev)) - dev_priv->savePFIT_CONTROL = I915_READ(PFIT_CONTROL); - dev_priv->saveLVDSPP_ON = I915_READ(LVDSPP_ON); - dev_priv->saveLVDSPP_OFF = I915_READ(LVDSPP_OFF); - dev_priv->savePP_CYCLE = I915_READ(PP_CYCLE); - - /* FIXME: save TV & SDVO state */ - - /* FBC state */ - dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE); - dev_priv->saveFBC_LL_BASE = I915_READ(FBC_LL_BASE); - dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2); - dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL); - - /* Interrupt state */ - dev_priv->saveIIR = I915_READ(I915REG_INT_IDENTITY_R); - dev_priv->saveIER = I915_READ(I915REG_INT_ENABLE_R); - dev_priv->saveIMR = I915_READ(I915REG_INT_MASK_R); - - /* VGA state */ - dev_priv->saveVCLK_DIVISOR_VGA0 = I915_READ(VCLK_DIVISOR_VGA0); - dev_priv->saveVCLK_DIVISOR_VGA1 = I915_READ(VCLK_DIVISOR_VGA1); - dev_priv->saveVCLK_POST_DIV = I915_READ(VCLK_POST_DIV); - dev_priv->saveVGACNTRL = I915_READ(VGACNTRL); - - /* Clock gating state */ - dev_priv->saveD_STATE = I915_READ(D_STATE); - dev_priv->saveDSPCLK_GATE_D = I915_READ(DSPCLK_GATE_D); - - /* Cache mode state */ - dev_priv->saveCACHE_MODE_0 = I915_READ(CACHE_MODE_0); - - /* Memory Arbitration state */ - dev_priv->saveMI_ARB_STATE = I915_READ(MI_ARB_STATE); - - /* Scratch space */ - for (i = 0; i < 16; i++) { - dev_priv->saveSWF0[i] = I915_READ(SWF0 + (i << 2)); - dev_priv->saveSWF1[i] = I915_READ(SWF10 + (i << 2)); - } - for (i = 0; i < 3; i++) - dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2)); - - i915_save_vga(dev); + intel_opregion_free(dev); if (state.event == PM_EVENT_SUSPEND) { /* Shut down the device */ @@ -382,155 +68,15 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state) static int i915_resume(struct drm_device *dev) { - struct drm_i915_private *dev_priv = dev->dev_private; - int i; - pci_set_power_state(dev->pdev, PCI_D0); pci_restore_state(dev->pdev); if (pci_enable_device(dev->pdev)) return -1; pci_set_master(dev->pdev); - pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB); - - I915_WRITE(DSPARB, dev_priv->saveDSPARB); - - /* Pipe & plane A info */ - /* Prime the clock */ - if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) { - I915_WRITE(DPLL_A, dev_priv->saveDPLL_A & - ~DPLL_VCO_ENABLE); - udelay(150); - } - I915_WRITE(FPA0, dev_priv->saveFPA0); - I915_WRITE(FPA1, dev_priv->saveFPA1); - /* Actually enable it */ - I915_WRITE(DPLL_A, dev_priv->saveDPLL_A); - udelay(150); - if (IS_I965G(dev)) - I915_WRITE(DPLL_A_MD, dev_priv->saveDPLL_A_MD); - udelay(150); - - /* Restore mode */ - I915_WRITE(HTOTAL_A, dev_priv->saveHTOTAL_A); - I915_WRITE(HBLANK_A, dev_priv->saveHBLANK_A); - I915_WRITE(HSYNC_A, dev_priv->saveHSYNC_A); - I915_WRITE(VTOTAL_A, dev_priv->saveVTOTAL_A); - I915_WRITE(VBLANK_A, dev_priv->saveVBLANK_A); - I915_WRITE(VSYNC_A, dev_priv->saveVSYNC_A); - I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A); - - /* Restore plane info */ - I915_WRITE(DSPASIZE, dev_priv->saveDSPASIZE); - I915_WRITE(DSPAPOS, dev_priv->saveDSPAPOS); - I915_WRITE(PIPEASRC, dev_priv->savePIPEASRC); - I915_WRITE(DSPABASE, dev_priv->saveDSPABASE); - I915_WRITE(DSPASTRIDE, dev_priv->saveDSPASTRIDE); - if (IS_I965G(dev)) { - I915_WRITE(DSPASURF, dev_priv->saveDSPASURF); - I915_WRITE(DSPATILEOFF, dev_priv->saveDSPATILEOFF); - } - - I915_WRITE(PIPEACONF, dev_priv->savePIPEACONF); - - i915_restore_palette(dev, PIPE_A); - /* Enable the plane */ - I915_WRITE(DSPACNTR, dev_priv->saveDSPACNTR); - I915_WRITE(DSPABASE, I915_READ(DSPABASE)); - - /* Pipe & plane B info */ - if (dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) { - I915_WRITE(DPLL_B, dev_priv->saveDPLL_B & - ~DPLL_VCO_ENABLE); - udelay(150); - } - I915_WRITE(FPB0, dev_priv->saveFPB0); - I915_WRITE(FPB1, dev_priv->saveFPB1); - /* Actually enable it */ - I915_WRITE(DPLL_B, dev_priv->saveDPLL_B); - udelay(150); - if (IS_I965G(dev)) - I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD); - udelay(150); - - /* Restore mode */ - I915_WRITE(HTOTAL_B, dev_priv->saveHTOTAL_B); - I915_WRITE(HBLANK_B, dev_priv->saveHBLANK_B); - I915_WRITE(HSYNC_B, dev_priv->saveHSYNC_B); - I915_WRITE(VTOTAL_B, dev_priv->saveVTOTAL_B); - I915_WRITE(VBLANK_B, dev_priv->saveVBLANK_B); - I915_WRITE(VSYNC_B, dev_priv->saveVSYNC_B); - I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B); - - /* Restore plane info */ - I915_WRITE(DSPBSIZE, dev_priv->saveDSPBSIZE); - I915_WRITE(DSPBPOS, dev_priv->saveDSPBPOS); - I915_WRITE(PIPEBSRC, dev_priv->savePIPEBSRC); - I915_WRITE(DSPBBASE, dev_priv->saveDSPBBASE); - I915_WRITE(DSPBSTRIDE, dev_priv->saveDSPBSTRIDE); - if (IS_I965G(dev)) { - I915_WRITE(DSPBSURF, dev_priv->saveDSPBSURF); - I915_WRITE(DSPBTILEOFF, dev_priv->saveDSPBTILEOFF); - } - - I915_WRITE(PIPEBCONF, dev_priv->savePIPEBCONF); - - i915_restore_palette(dev, PIPE_B); - /* Enable the plane */ - I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR); - I915_WRITE(DSPBBASE, I915_READ(DSPBBASE)); - - /* CRT state */ - I915_WRITE(ADPA, dev_priv->saveADPA); - - /* LVDS state */ - if (IS_I965G(dev)) - I915_WRITE(BLC_PWM_CTL2, dev_priv->saveBLC_PWM_CTL2); - if (IS_MOBILE(dev) && !IS_I830(dev)) - I915_WRITE(LVDS, dev_priv->saveLVDS); - if (!IS_I830(dev) && !IS_845G(dev)) - I915_WRITE(PFIT_CONTROL, dev_priv->savePFIT_CONTROL); - - I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS); - I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL); - I915_WRITE(LVDSPP_ON, dev_priv->saveLVDSPP_ON); - I915_WRITE(LVDSPP_OFF, dev_priv->saveLVDSPP_OFF); - I915_WRITE(PP_CYCLE, dev_priv->savePP_CYCLE); - I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL); - - /* FIXME: restore TV & SDVO state */ - - /* FBC info */ - I915_WRITE(FBC_CFB_BASE, dev_priv->saveFBC_CFB_BASE); - I915_WRITE(FBC_LL_BASE, dev_priv->saveFBC_LL_BASE); - I915_WRITE(FBC_CONTROL2, dev_priv->saveFBC_CONTROL2); - I915_WRITE(FBC_CONTROL, dev_priv->saveFBC_CONTROL); - - /* VGA state */ - I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL); - I915_WRITE(VCLK_DIVISOR_VGA0, dev_priv->saveVCLK_DIVISOR_VGA0); - I915_WRITE(VCLK_DIVISOR_VGA1, dev_priv->saveVCLK_DIVISOR_VGA1); - I915_WRITE(VCLK_POST_DIV, dev_priv->saveVCLK_POST_DIV); - udelay(150); - - /* Clock gating state */ - I915_WRITE (D_STATE, dev_priv->saveD_STATE); - I915_WRITE (DSPCLK_GATE_D, dev_priv->saveDSPCLK_GATE_D); - - /* Cache mode state */ - I915_WRITE (CACHE_MODE_0, dev_priv->saveCACHE_MODE_0 | 0xffff0000); - - /* Memory arbitration state */ - I915_WRITE (MI_ARB_STATE, dev_priv->saveMI_ARB_STATE | 0xffff0000); - - for (i = 0; i < 16; i++) { - I915_WRITE(SWF0 + (i << 2), dev_priv->saveSWF0[i]); - I915_WRITE(SWF10 + (i << 2), dev_priv->saveSWF1[i+7]); - } - for (i = 0; i < 3; i++) - I915_WRITE(SWF30 + (i << 2), dev_priv->saveSWF2[i]); + i915_restore_state(dev); - i915_restore_vga(dev); + intel_opregion_init(dev); return 0; } @@ -541,17 +87,19 @@ static struct drm_driver driver = { */ .driver_features = DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | /* DRIVER_USE_MTRR |*/ - DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_IRQ_VBL | - DRIVER_IRQ_VBL2, + DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM, .load = i915_driver_load, .unload = i915_driver_unload, + .open = i915_driver_open, .lastclose = i915_driver_lastclose, .preclose = i915_driver_preclose, + .postclose = i915_driver_postclose, .suspend = i915_suspend, .resume = i915_resume, .device_is_agp = i915_driver_device_is_agp, - .vblank_wait = i915_driver_vblank_wait, - .vblank_wait2 = i915_driver_vblank_wait2, + .get_vblank_counter = i915_get_vblank_counter, + .enable_vblank = i915_enable_vblank, + .disable_vblank = i915_disable_vblank, .irq_preinstall = i915_driver_irq_preinstall, .irq_postinstall = i915_driver_irq_postinstall, .irq_uninstall = i915_driver_irq_uninstall, @@ -559,6 +107,10 @@ static struct drm_driver driver = { .reclaim_buffers = drm_core_reclaim_buffers, .get_map_ofs = drm_core_get_map_ofs, .get_reg_ofs = drm_core_get_reg_ofs, + .proc_init = i915_gem_proc_init, + .proc_cleanup = i915_gem_proc_cleanup, + .gem_init_object = i915_gem_init_object, + .gem_free_object = i915_gem_free_object, .ioctls = i915_ioctls, .fops = { .owner = THIS_MODULE, diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index d7326d92a237..eae4ed3956e0 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -30,6 +30,8 @@ #ifndef _I915_DRV_H_ #define _I915_DRV_H_ +#include "i915_reg.h" + /* General customization: */ @@ -37,7 +39,12 @@ #define DRIVER_NAME "i915" #define DRIVER_DESC "Intel Graphics" -#define DRIVER_DATE "20060119" +#define DRIVER_DATE "20080730" + +enum pipe { + PIPE_A = 0, + PIPE_B, +}; /* Interface history: * @@ -53,16 +60,23 @@ #define DRIVER_MINOR 6 #define DRIVER_PATCHLEVEL 0 +#define WATCH_COHERENCY 0 +#define WATCH_BUF 0 +#define WATCH_EXEC 0 +#define WATCH_LRU 0 +#define WATCH_RELOC 0 +#define WATCH_INACTIVE 0 +#define WATCH_PWRITE 0 + typedef struct _drm_i915_ring_buffer { int tail_mask; - unsigned long Start; - unsigned long End; unsigned long Size; u8 *virtual_start; int head; int tail; int space; drm_local_map_t map; + struct drm_gem_object *ring_obj; } drm_i915_ring_buffer_t; struct mem_block { @@ -76,13 +90,28 @@ struct mem_block { typedef struct _drm_i915_vbl_swap { struct list_head head; drm_drawable_t drw_id; - unsigned int pipe; + unsigned int plane; unsigned int sequence; } drm_i915_vbl_swap_t; +struct opregion_header; +struct opregion_acpi; +struct opregion_swsci; +struct opregion_asle; + +struct intel_opregion { + struct opregion_header *header; + struct opregion_acpi *acpi; + struct opregion_swsci *swsci; + struct opregion_asle *asle; + int enabled; +}; + typedef struct drm_i915_private { + struct drm_device *dev; + + void __iomem *regs; drm_local_map_t *sarea; - drm_local_map_t *mmio_map; drm_i915_sarea_t *sarea_priv; drm_i915_ring_buffer_t ring; @@ -90,20 +119,25 @@ typedef struct drm_i915_private { drm_dma_handle_t *status_page_dmah; void *hw_status_page; dma_addr_t dma_status_page; - unsigned long counter; + uint32_t counter; unsigned int status_gfx_addr; drm_local_map_t hws_map; + struct drm_gem_object *hws_obj; unsigned int cpp; int back_offset; int front_offset; int current_page; int page_flipping; - int use_mi_batchbuffer_start; wait_queue_head_t irq_queue; atomic_t irq_received; - atomic_t irq_emitted; + /** Protects user_irq_refcount and irq_mask_reg */ + spinlock_t user_irq_lock; + /** Refcount for i915_user_irq_get() versus i915_user_irq_put(). */ + int user_irq_refcount; + /** Cached value of IMR to avoid reads in updating the bitfield */ + u32 irq_mask_reg; int tex_lru_log_granularity; int allow_batchbuffer; @@ -115,6 +149,8 @@ typedef struct drm_i915_private { drm_i915_vbl_swap_t vbl_swaps; unsigned int swaps_pending; + struct intel_opregion opregion; + /* Register state */ u8 saveLBB; u32 saveDSPACNTR; @@ -139,7 +175,7 @@ typedef struct drm_i915_private { u32 saveDSPASTRIDE; u32 saveDSPASIZE; u32 saveDSPAPOS; - u32 saveDSPABASE; + u32 saveDSPAADDR; u32 saveDSPASURF; u32 saveDSPATILEOFF; u32 savePFIT_PGM_RATIOS; @@ -160,24 +196,24 @@ typedef struct drm_i915_private { u32 saveDSPBSTRIDE; u32 saveDSPBSIZE; u32 saveDSPBPOS; - u32 saveDSPBBASE; + u32 saveDSPBADDR; u32 saveDSPBSURF; u32 saveDSPBTILEOFF; - u32 saveVCLK_DIVISOR_VGA0; - u32 saveVCLK_DIVISOR_VGA1; - u32 saveVCLK_POST_DIV; + u32 saveVGA0; + u32 saveVGA1; + u32 saveVGA_PD; u32 saveVGACNTRL; u32 saveADPA; u32 saveLVDS; - u32 saveLVDSPP_ON; - u32 saveLVDSPP_OFF; + u32 savePP_ON_DELAYS; + u32 savePP_OFF_DELAYS; u32 saveDVOA; u32 saveDVOB; u32 saveDVOC; u32 savePP_ON; u32 savePP_OFF; u32 savePP_CONTROL; - u32 savePP_CYCLE; + u32 savePP_DIVISOR; u32 savePFIT_CONTROL; u32 save_palette_a[256]; u32 save_palette_b[256]; @@ -190,7 +226,7 @@ typedef struct drm_i915_private { u32 saveIMR; u32 saveCACHE_MODE_0; u32 saveD_STATE; - u32 saveDSPCLK_GATE_D; + u32 saveCG_2D_DIS; u32 saveMI_ARB_STATE; u32 saveSWF0[16]; u32 saveSWF1[16]; @@ -203,8 +239,180 @@ typedef struct drm_i915_private { u8 saveDACMASK; u8 saveDACDATA[256*3]; /* 256 3-byte colors */ u8 saveCR[37]; + + struct { + struct drm_mm gtt_space; + + /** + * List of objects currently involved in rendering from the + * ringbuffer. + * + * A reference is held on the buffer while on this list. + */ + struct list_head active_list; + + /** + * List of objects which are not in the ringbuffer but which + * still have a write_domain which needs to be flushed before + * unbinding. + * + * A reference is held on the buffer while on this list. + */ + struct list_head flushing_list; + + /** + * LRU list of objects which are not in the ringbuffer and + * are ready to unbind, but are still in the GTT. + * + * A reference is not held on the buffer while on this list, + * as merely being GTT-bound shouldn't prevent its being + * freed, and we'll pull it off the list in the free path. + */ + struct list_head inactive_list; + + /** + * List of breadcrumbs associated with GPU requests currently + * outstanding. + */ + struct list_head request_list; + + /** + * We leave the user IRQ off as much as possible, + * but this means that requests will finish and never + * be retired once the system goes idle. Set a timer to + * fire periodically while the ring is running. When it + * fires, go retire requests. + */ + struct delayed_work retire_work; + + /** Work task for vblank-related ring access */ + struct work_struct vblank_work; + + uint32_t next_gem_seqno; + + /** + * Waiting sequence number, if any + */ + uint32_t waiting_gem_seqno; + + /** + * Last seq seen at irq time + */ + uint32_t irq_gem_seqno; + + /** + * Flag if the X Server, and thus DRM, is not currently in + * control of the device. + * + * This is set between LeaveVT and EnterVT. It needs to be + * replaced with a semaphore. It also needs to be + * transitioned away from for kernel modesetting. + */ + int suspended; + + /** + * Flag if the hardware appears to be wedged. + * + * This is set when attempts to idle the device timeout. + * It prevents command submission from occuring and makes + * every pending request fail + */ + int wedged; + + /** Bit 6 swizzling required for X tiling */ + uint32_t bit_6_swizzle_x; + /** Bit 6 swizzling required for Y tiling */ + uint32_t bit_6_swizzle_y; + } mm; } drm_i915_private_t; +/** driver private structure attached to each drm_gem_object */ +struct drm_i915_gem_object { + struct drm_gem_object *obj; + + /** Current space allocated to this object in the GTT, if any. */ + struct drm_mm_node *gtt_space; + + /** This object's place on the active/flushing/inactive lists */ + struct list_head list; + + /** + * This is set if the object is on the active or flushing lists + * (has pending rendering), and is not set if it's on inactive (ready + * to be unbound). + */ + int active; + + /** + * This is set if the object has been written to since last bound + * to the GTT + */ + int dirty; + + /** AGP memory structure for our GTT binding. */ + DRM_AGP_MEM *agp_mem; + + struct page **page_list; + + /** + * Current offset of the object in GTT space. + * + * This is the same as gtt_space->start + */ + uint32_t gtt_offset; + + /** Boolean whether this object has a valid gtt offset. */ + int gtt_bound; + + /** How many users have pinned this object in GTT space */ + int pin_count; + + /** Breadcrumb of last rendering to the buffer. */ + uint32_t last_rendering_seqno; + + /** Current tiling mode for the object. */ + uint32_t tiling_mode; + + /** AGP mapping type (AGP_USER_MEMORY or AGP_USER_CACHED_MEMORY */ + uint32_t agp_type; + + /** + * Flagging of which individual pages are valid in GEM_DOMAIN_CPU when + * GEM_DOMAIN_CPU is not in the object's read domain. + */ + uint8_t *page_cpu_valid; +}; + +/** + * Request queue structure. + * + * The request queue allows us to note sequence numbers that have been emitted + * and may be associated with active buffers to be retired. + * + * By keeping this list, we can avoid having to do questionable + * sequence-number comparisons on buffer last_rendering_seqnos, and associate + * an emission time with seqnos for tracking how far ahead of the GPU we are. + */ +struct drm_i915_gem_request { + /** GEM sequence number associated with this request. */ + uint32_t seqno; + + /** Time at which this request was emitted, in jiffies. */ + unsigned long emitted_jiffies; + + /** Cache domains that were flushed at the start of the request. */ + uint32_t flush_domains; + + struct list_head list; +}; + +struct drm_i915_file_private { + struct { + uint32_t last_gem_seqno; + uint32_t last_gem_throttle_seqno; + } mm; +}; + extern struct drm_ioctl_desc i915_ioctls[]; extern int i915_max_ioctl; @@ -212,31 +420,42 @@ extern int i915_max_ioctl; extern void i915_kernel_lost_context(struct drm_device * dev); extern int i915_driver_load(struct drm_device *, unsigned long flags); extern int i915_driver_unload(struct drm_device *); +extern int i915_driver_open(struct drm_device *dev, struct drm_file *file_priv); extern void i915_driver_lastclose(struct drm_device * dev); extern void i915_driver_preclose(struct drm_device *dev, struct drm_file *file_priv); +extern void i915_driver_postclose(struct drm_device *dev, + struct drm_file *file_priv); extern int i915_driver_device_is_agp(struct drm_device * dev); extern long i915_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); +extern int i915_emit_box(struct drm_device *dev, + struct drm_clip_rect __user *boxes, + int i, int DR1, int DR4); /* i915_irq.c */ extern int i915_irq_emit(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int i915_irq_wait(struct drm_device *dev, void *data, struct drm_file *file_priv); +void i915_user_irq_get(struct drm_device *dev); +void i915_user_irq_put(struct drm_device *dev); -extern int i915_driver_vblank_wait(struct drm_device *dev, unsigned int *sequence); -extern int i915_driver_vblank_wait2(struct drm_device *dev, unsigned int *sequence); +extern void i915_gem_vblank_work_handler(struct work_struct *work); extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS); extern void i915_driver_irq_preinstall(struct drm_device * dev); -extern void i915_driver_irq_postinstall(struct drm_device * dev); +extern int i915_driver_irq_postinstall(struct drm_device *dev); extern void i915_driver_irq_uninstall(struct drm_device * dev); extern int i915_vblank_pipe_set(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int i915_vblank_pipe_get(struct drm_device *dev, void *data, struct drm_file *file_priv); +extern int i915_enable_vblank(struct drm_device *dev, int crtc); +extern void i915_disable_vblank(struct drm_device *dev, int crtc); +extern u32 i915_get_vblank_counter(struct drm_device *dev, int crtc); extern int i915_vblank_swap(struct drm_device *dev, void *data, struct drm_file *file_priv); +extern void i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask); /* i915_mem.c */ extern int i915_mem_alloc(struct drm_device *dev, void *data, @@ -250,11 +469,99 @@ extern int i915_mem_destroy_heap(struct drm_device *dev, void *data, extern void i915_mem_takedown(struct mem_block **heap); extern void i915_mem_release(struct drm_device * dev, struct drm_file *file_priv, struct mem_block *heap); +/* i915_gem.c */ +int i915_gem_init_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +int i915_gem_create_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +int i915_gem_pread_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +int i915_gem_pwrite_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +int i915_gem_mmap_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +int i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +int i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +int i915_gem_execbuffer(struct drm_device *dev, void *data, + struct drm_file *file_priv); +int i915_gem_pin_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +int i915_gem_unpin_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +int i915_gem_busy_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +int i915_gem_throttle_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +int i915_gem_entervt_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +int i915_gem_leavevt_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +int i915_gem_set_tiling(struct drm_device *dev, void *data, + struct drm_file *file_priv); +int i915_gem_get_tiling(struct drm_device *dev, void *data, + struct drm_file *file_priv); +void i915_gem_load(struct drm_device *dev); +int i915_gem_proc_init(struct drm_minor *minor); +void i915_gem_proc_cleanup(struct drm_minor *minor); +int i915_gem_init_object(struct drm_gem_object *obj); +void i915_gem_free_object(struct drm_gem_object *obj); +int i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment); +void i915_gem_object_unpin(struct drm_gem_object *obj); +void i915_gem_lastclose(struct drm_device *dev); +uint32_t i915_get_gem_seqno(struct drm_device *dev); +void i915_gem_retire_requests(struct drm_device *dev); +void i915_gem_retire_work_handler(struct work_struct *work); +void i915_gem_clflush_object(struct drm_gem_object *obj); + +/* i915_gem_tiling.c */ +void i915_gem_detect_bit_6_swizzle(struct drm_device *dev); + +/* i915_gem_debug.c */ +void i915_gem_dump_object(struct drm_gem_object *obj, int len, + const char *where, uint32_t mark); +#if WATCH_INACTIVE +void i915_verify_inactive(struct drm_device *dev, char *file, int line); +#else +#define i915_verify_inactive(dev, file, line) +#endif +void i915_gem_object_check_coherency(struct drm_gem_object *obj, int handle); +void i915_gem_dump_object(struct drm_gem_object *obj, int len, + const char *where, uint32_t mark); +void i915_dump_lru(struct drm_device *dev, const char *where); + +/* i915_suspend.c */ +extern int i915_save_state(struct drm_device *dev); +extern int i915_restore_state(struct drm_device *dev); + +/* i915_suspend.c */ +extern int i915_save_state(struct drm_device *dev); +extern int i915_restore_state(struct drm_device *dev); + +/* i915_opregion.c */ +extern int intel_opregion_init(struct drm_device *dev); +extern void intel_opregion_free(struct drm_device *dev); +extern void opregion_asle_intr(struct drm_device *dev); +extern void opregion_enable_asle(struct drm_device *dev); + +/** + * Lock test for when it's just for synchronization of ring access. + * + * In that case, we don't need to do it when GEM is initialized as nobody else + * has access to the ring. + */ +#define RING_LOCK_TEST_WITH_RETURN(dev, file_priv) do { \ + if (((drm_i915_private_t *)dev->dev_private)->ring.ring_obj == NULL) \ + LOCK_TEST_WITH_RETURN(dev, file_priv); \ +} while (0) -#define I915_READ(reg) DRM_READ32(dev_priv->mmio_map, (reg)) -#define I915_WRITE(reg,val) DRM_WRITE32(dev_priv->mmio_map, (reg), (val)) -#define I915_READ16(reg) DRM_READ16(dev_priv->mmio_map, (reg)) -#define I915_WRITE16(reg,val) DRM_WRITE16(dev_priv->mmio_map, (reg), (val)) +#define I915_READ(reg) readl(dev_priv->regs + (reg)) +#define I915_WRITE(reg, val) writel(val, dev_priv->regs + (reg)) +#define I915_READ16(reg) readw(dev_priv->regs + (reg)) +#define I915_WRITE16(reg, val) writel(val, dev_priv->regs + (reg)) +#define I915_READ8(reg) readb(dev_priv->regs + (reg)) +#define I915_WRITE8(reg, val) writeb(val, dev_priv->regs + (reg)) #define I915_VERBOSE 0 @@ -284,816 +591,29 @@ extern void i915_mem_release(struct drm_device * dev, if (I915_VERBOSE) DRM_DEBUG("ADVANCE_LP_RING %x\n", outring); \ dev_priv->ring.tail = outring; \ dev_priv->ring.space -= outcount * 4; \ - I915_WRITE(LP_RING + RING_TAIL, outring); \ + I915_WRITE(PRB0_TAIL, outring); \ } while(0) -extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); - -/* Extended config space */ -#define LBB 0xf4 - -/* VGA stuff */ - -#define VGA_ST01_MDA 0x3ba -#define VGA_ST01_CGA 0x3da - -#define VGA_MSR_WRITE 0x3c2 -#define VGA_MSR_READ 0x3cc -#define VGA_MSR_MEM_EN (1<<1) -#define VGA_MSR_CGA_MODE (1<<0) - -#define VGA_SR_INDEX 0x3c4 -#define VGA_SR_DATA 0x3c5 - -#define VGA_AR_INDEX 0x3c0 -#define VGA_AR_VID_EN (1<<5) -#define VGA_AR_DATA_WRITE 0x3c0 -#define VGA_AR_DATA_READ 0x3c1 - -#define VGA_GR_INDEX 0x3ce -#define VGA_GR_DATA 0x3cf -/* GR05 */ -#define VGA_GR_MEM_READ_MODE_SHIFT 3 -#define VGA_GR_MEM_READ_MODE_PLANE 1 -/* GR06 */ -#define VGA_GR_MEM_MODE_MASK 0xc -#define VGA_GR_MEM_MODE_SHIFT 2 -#define VGA_GR_MEM_A0000_AFFFF 0 -#define VGA_GR_MEM_A0000_BFFFF 1 -#define VGA_GR_MEM_B0000_B7FFF 2 -#define VGA_GR_MEM_B0000_BFFFF 3 - -#define VGA_DACMASK 0x3c6 -#define VGA_DACRX 0x3c7 -#define VGA_DACWX 0x3c8 -#define VGA_DACDATA 0x3c9 - -#define VGA_CR_INDEX_MDA 0x3b4 -#define VGA_CR_DATA_MDA 0x3b5 -#define VGA_CR_INDEX_CGA 0x3d4 -#define VGA_CR_DATA_CGA 0x3d5 - -#define GFX_OP_USER_INTERRUPT ((0<<29)|(2<<23)) -#define GFX_OP_BREAKPOINT_INTERRUPT ((0<<29)|(1<<23)) -#define CMD_REPORT_HEAD (7<<23) -#define CMD_STORE_DWORD_IDX ((0x21<<23) | 0x1) -#define CMD_OP_BATCH_BUFFER ((0x0<<29)|(0x30<<23)|0x1) - -#define INST_PARSER_CLIENT 0x00000000 -#define INST_OP_FLUSH 0x02000000 -#define INST_FLUSH_MAP_CACHE 0x00000001 - -#define BB1_START_ADDR_MASK (~0x7) -#define BB1_PROTECTED (1<<0) -#define BB1_UNPROTECTED (0<<0) -#define BB2_END_ADDR_MASK (~0x7) - -/* Framebuffer compression */ -#define FBC_CFB_BASE 0x03200 /* 4k page aligned */ -#define FBC_LL_BASE 0x03204 /* 4k page aligned */ -#define FBC_CONTROL 0x03208 -#define FBC_CTL_EN (1<<31) -#define FBC_CTL_PERIODIC (1<<30) -#define FBC_CTL_INTERVAL_SHIFT (16) -#define FBC_CTL_UNCOMPRESSIBLE (1<<14) -#define FBC_CTL_STRIDE_SHIFT (5) -#define FBC_CTL_FENCENO (1<<0) -#define FBC_COMMAND 0x0320c -#define FBC_CMD_COMPRESS (1<<0) -#define FBC_STATUS 0x03210 -#define FBC_STAT_COMPRESSING (1<<31) -#define FBC_STAT_COMPRESSED (1<<30) -#define FBC_STAT_MODIFIED (1<<29) -#define FBC_STAT_CURRENT_LINE (1<<0) -#define FBC_CONTROL2 0x03214 -#define FBC_CTL_FENCE_DBL (0<<4) -#define FBC_CTL_IDLE_IMM (0<<2) -#define FBC_CTL_IDLE_FULL (1<<2) -#define FBC_CTL_IDLE_LINE (2<<2) -#define FBC_CTL_IDLE_DEBUG (3<<2) -#define FBC_CTL_CPU_FENCE (1<<1) -#define FBC_CTL_PLANEA (0<<0) -#define FBC_CTL_PLANEB (1<<0) -#define FBC_FENCE_OFF 0x0321b - -#define FBC_LL_SIZE (1536) -#define FBC_LL_PAD (32) - -/* Interrupt bits: - */ -#define USER_INT_FLAG (1<<1) -#define VSYNC_PIPEB_FLAG (1<<5) -#define VSYNC_PIPEA_FLAG (1<<7) -#define HWB_OOM_FLAG (1<<13) /* binner out of memory */ - -#define I915REG_HWSTAM 0x02098 -#define I915REG_INT_IDENTITY_R 0x020a4 -#define I915REG_INT_MASK_R 0x020a8 -#define I915REG_INT_ENABLE_R 0x020a0 - -#define I915REG_PIPEASTAT 0x70024 -#define I915REG_PIPEBSTAT 0x71024 - -#define I915_VBLANK_INTERRUPT_ENABLE (1UL<<17) -#define I915_VBLANK_CLEAR (1UL<<1) - -#define SRX_INDEX 0x3c4 -#define SRX_DATA 0x3c5 -#define SR01 1 -#define SR01_SCREEN_OFF (1<<5) - -#define PPCR 0x61204 -#define PPCR_ON (1<<0) - -#define DVOB 0x61140 -#define DVOB_ON (1<<31) -#define DVOC 0x61160 -#define DVOC_ON (1<<31) -#define LVDS 0x61180 -#define LVDS_ON (1<<31) - -#define ADPA 0x61100 -#define ADPA_DPMS_MASK (~(3<<10)) -#define ADPA_DPMS_ON (0<<10) -#define ADPA_DPMS_SUSPEND (1<<10) -#define ADPA_DPMS_STANDBY (2<<10) -#define ADPA_DPMS_OFF (3<<10) - -#define NOPID 0x2094 -#define LP_RING 0x2030 -#define HP_RING 0x2040 -/* The binner has its own ring buffer: - */ -#define HWB_RING 0x2400 - -#define RING_TAIL 0x00 -#define TAIL_ADDR 0x001FFFF8 -#define RING_HEAD 0x04 -#define HEAD_WRAP_COUNT 0xFFE00000 -#define HEAD_WRAP_ONE 0x00200000 -#define HEAD_ADDR 0x001FFFFC -#define RING_START 0x08 -#define START_ADDR 0x0xFFFFF000 -#define RING_LEN 0x0C -#define RING_NR_PAGES 0x001FF000 -#define RING_REPORT_MASK 0x00000006 -#define RING_REPORT_64K 0x00000002 -#define RING_REPORT_128K 0x00000004 -#define RING_NO_REPORT 0x00000000 -#define RING_VALID_MASK 0x00000001 -#define RING_VALID 0x00000001 -#define RING_INVALID 0x00000000 - -/* Instruction parser error reg: - */ -#define IPEIR 0x2088 - -/* Scratch pad debug 0 reg: - */ -#define SCPD0 0x209c - -/* Error status reg: - */ -#define ESR 0x20b8 - -/* Secondary DMA fetch address debug reg: - */ -#define DMA_FADD_S 0x20d4 - -/* Memory Interface Arbitration State - */ -#define MI_ARB_STATE 0x20e4 - -/* Cache mode 0 reg. - * - Manipulating render cache behaviour is central - * to the concept of zone rendering, tuning this reg can help avoid - * unnecessary render cache reads and even writes (for z/stencil) - * at beginning and end of scene. - * - * - To change a bit, write to this reg with a mask bit set and the - * bit of interest either set or cleared. EG: (BIT<<16) | BIT to set. - */ -#define Cache_Mode_0 0x2120 -#define CACHE_MODE_0 0x2120 -#define CM0_MASK_SHIFT 16 -#define CM0_IZ_OPT_DISABLE (1<<6) -#define CM0_ZR_OPT_DISABLE (1<<5) -#define CM0_DEPTH_EVICT_DISABLE (1<<4) -#define CM0_COLOR_EVICT_DISABLE (1<<3) -#define CM0_DEPTH_WRITE_DISABLE (1<<1) -#define CM0_RC_OP_FLUSH_DISABLE (1<<0) - - -/* Graphics flush control. A CPU write flushes the GWB of all writes. - * The data is discarded. - */ -#define GFX_FLSH_CNTL 0x2170 - -/* Binner control. Defines the location of the bin pointer list: - */ -#define BINCTL 0x2420 -#define BC_MASK (1 << 9) - -/* Binned scene info. - */ -#define BINSCENE 0x2428 -#define BS_OP_LOAD (1 << 8) -#define BS_MASK (1 << 22) - -/* Bin command parser debug reg: - */ -#define BCPD 0x2480 - -/* Bin memory control debug reg: - */ -#define BMCD 0x2484 - -/* Bin data cache debug reg: - */ -#define BDCD 0x2488 - -/* Binner pointer cache debug reg: - */ -#define BPCD 0x248c - -/* Binner scratch pad debug reg: - */ -#define BINSKPD 0x24f0 - -/* HWB scratch pad debug reg: - */ -#define HWBSKPD 0x24f4 - -/* Binner memory pool reg: - */ -#define BMP_BUFFER 0x2430 -#define BMP_PAGE_SIZE_4K (0 << 10) -#define BMP_BUFFER_SIZE_SHIFT 1 -#define BMP_ENABLE (1 << 0) - -/* Get/put memory from the binner memory pool: - */ -#define BMP_GET 0x2438 -#define BMP_PUT 0x2440 -#define BMP_OFFSET_SHIFT 5 - -/* 3D state packets: - */ -#define GFX_OP_RASTER_RULES ((0x3<<29)|(0x7<<24)) - -#define GFX_OP_SCISSOR ((0x3<<29)|(0x1c<<24)|(0x10<<19)) -#define SC_UPDATE_SCISSOR (0x1<<1) -#define SC_ENABLE_MASK (0x1<<0) -#define SC_ENABLE (0x1<<0) - -#define GFX_OP_LOAD_INDIRECT ((0x3<<29)|(0x1d<<24)|(0x7<<16)) - -#define GFX_OP_SCISSOR_INFO ((0x3<<29)|(0x1d<<24)|(0x81<<16)|(0x1)) -#define SCI_YMIN_MASK (0xffff<<16) -#define SCI_XMIN_MASK (0xffff<<0) -#define SCI_YMAX_MASK (0xffff<<16) -#define SCI_XMAX_MASK (0xffff<<0) - -#define GFX_OP_SCISSOR_ENABLE ((0x3<<29)|(0x1c<<24)|(0x10<<19)) -#define GFX_OP_SCISSOR_RECT ((0x3<<29)|(0x1d<<24)|(0x81<<16)|1) -#define GFX_OP_COLOR_FACTOR ((0x3<<29)|(0x1d<<24)|(0x1<<16)|0x0) -#define GFX_OP_STIPPLE ((0x3<<29)|(0x1d<<24)|(0x83<<16)) -#define GFX_OP_MAP_INFO ((0x3<<29)|(0x1d<<24)|0x4) -#define GFX_OP_DESTBUFFER_VARS ((0x3<<29)|(0x1d<<24)|(0x85<<16)|0x0) -#define GFX_OP_DRAWRECT_INFO ((0x3<<29)|(0x1d<<24)|(0x80<<16)|(0x3)) - -#define GFX_OP_DRAWRECT_INFO_I965 ((0x7900<<16)|0x2) - -#define SRC_COPY_BLT_CMD ((2<<29)|(0x43<<22)|4) -#define XY_SRC_COPY_BLT_CMD ((2<<29)|(0x53<<22)|6) -#define XY_SRC_COPY_BLT_WRITE_ALPHA (1<<21) -#define XY_SRC_COPY_BLT_WRITE_RGB (1<<20) -#define XY_SRC_COPY_BLT_SRC_TILED (1<<15) -#define XY_SRC_COPY_BLT_DST_TILED (1<<11) - -#define MI_BATCH_BUFFER ((0x30<<23)|1) -#define MI_BATCH_BUFFER_START (0x31<<23) -#define MI_BATCH_BUFFER_END (0xA<<23) -#define MI_BATCH_NON_SECURE (1) -#define MI_BATCH_NON_SECURE_I965 (1<<8) - -#define MI_WAIT_FOR_EVENT ((0x3<<23)) -#define MI_WAIT_FOR_PLANE_B_FLIP (1<<6) -#define MI_WAIT_FOR_PLANE_A_FLIP (1<<2) -#define MI_WAIT_FOR_PLANE_A_SCANLINES (1<<1) - -#define MI_LOAD_SCAN_LINES_INCL ((0x12<<23)) - -#define CMD_OP_DISPLAYBUFFER_INFO ((0x0<<29)|(0x14<<23)|2) -#define ASYNC_FLIP (1<<22) -#define DISPLAY_PLANE_A (0<<20) -#define DISPLAY_PLANE_B (1<<20) - -/* Display regs */ -#define DSPACNTR 0x70180 -#define DSPBCNTR 0x71180 -#define DISPPLANE_SEL_PIPE_MASK (1<<24) - -/* Define the region of interest for the binner: - */ -#define CMD_OP_BIN_CONTROL ((0x3<<29)|(0x1d<<24)|(0x84<<16)|4) - -#define CMD_OP_DESTBUFFER_INFO ((0x3<<29)|(0x1d<<24)|(0x8e<<16)|1) - -#define CMD_MI_FLUSH (0x04 << 23) -#define MI_NO_WRITE_FLUSH (1 << 2) -#define MI_READ_FLUSH (1 << 0) -#define MI_EXE_FLUSH (1 << 1) -#define MI_END_SCENE (1 << 4) /* flush binner and incr scene count */ -#define MI_SCENE_COUNT (1 << 3) /* just increment scene count */ - -#define BREADCRUMB_BITS 31 -#define BREADCRUMB_MASK ((1U << BREADCRUMB_BITS) - 1) - -#define READ_BREADCRUMB(dev_priv) (((volatile u32*)(dev_priv->hw_status_page))[5]) -#define READ_HWSP(dev_priv, reg) (((volatile u32*)(dev_priv->hw_status_page))[reg]) - -#define BLC_PWM_CTL 0x61254 -#define BACKLIGHT_MODULATION_FREQ_SHIFT (17) - -#define BLC_PWM_CTL2 0x61250 -/** - * This is the most significant 15 bits of the number of backlight cycles in a - * complete cycle of the modulated backlight control. - * - * The actual value is this field multiplied by two. - */ -#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17) -#define BLM_LEGACY_MODE (1 << 16) -/** - * This is the number of cycles out of the backlight modulation cycle for which - * the backlight is on. - * - * This field must be no greater than the number of cycles in the complete - * backlight modulation cycle. - */ -#define BACKLIGHT_DUTY_CYCLE_SHIFT (0) -#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff) - -#define I915_GCFGC 0xf0 -#define I915_LOW_FREQUENCY_ENABLE (1 << 7) -#define I915_DISPLAY_CLOCK_190_200_MHZ (0 << 4) -#define I915_DISPLAY_CLOCK_333_MHZ (4 << 4) -#define I915_DISPLAY_CLOCK_MASK (7 << 4) - -#define I855_HPLLCC 0xc0 -#define I855_CLOCK_CONTROL_MASK (3 << 0) -#define I855_CLOCK_133_200 (0 << 0) -#define I855_CLOCK_100_200 (1 << 0) -#define I855_CLOCK_100_133 (2 << 0) -#define I855_CLOCK_166_250 (3 << 0) - -/* p317, 319 - */ -#define VCLK2_VCO_M 0x6008 /* treat as 16 bit? (includes msbs) */ -#define VCLK2_VCO_N 0x600a -#define VCLK2_VCO_DIV_SEL 0x6012 - -#define VCLK_DIVISOR_VGA0 0x6000 -#define VCLK_DIVISOR_VGA1 0x6004 -#define VCLK_POST_DIV 0x6010 -/** Selects a post divisor of 4 instead of 2. */ -# define VGA1_PD_P2_DIV_4 (1 << 15) -/** Overrides the p2 post divisor field */ -# define VGA1_PD_P1_DIV_2 (1 << 13) -# define VGA1_PD_P1_SHIFT 8 -/** P1 value is 2 greater than this field */ -# define VGA1_PD_P1_MASK (0x1f << 8) -/** Selects a post divisor of 4 instead of 2. */ -# define VGA0_PD_P2_DIV_4 (1 << 7) -/** Overrides the p2 post divisor field */ -# define VGA0_PD_P1_DIV_2 (1 << 5) -# define VGA0_PD_P1_SHIFT 0 -/** P1 value is 2 greater than this field */ -# define VGA0_PD_P1_MASK (0x1f << 0) - -/* PCI D state control register */ -#define D_STATE 0x6104 -#define DSPCLK_GATE_D 0x6200 - -/* I830 CRTC registers */ -#define HTOTAL_A 0x60000 -#define HBLANK_A 0x60004 -#define HSYNC_A 0x60008 -#define VTOTAL_A 0x6000c -#define VBLANK_A 0x60010 -#define VSYNC_A 0x60014 -#define PIPEASRC 0x6001c -#define BCLRPAT_A 0x60020 -#define VSYNCSHIFT_A 0x60028 - -#define HTOTAL_B 0x61000 -#define HBLANK_B 0x61004 -#define HSYNC_B 0x61008 -#define VTOTAL_B 0x6100c -#define VBLANK_B 0x61010 -#define VSYNC_B 0x61014 -#define PIPEBSRC 0x6101c -#define BCLRPAT_B 0x61020 -#define VSYNCSHIFT_B 0x61028 - -#define PP_STATUS 0x61200 -# define PP_ON (1 << 31) -/** - * Indicates that all dependencies of the panel are on: - * - * - PLL enabled - * - pipe enabled - * - LVDS/DVOB/DVOC on - */ -# define PP_READY (1 << 30) -# define PP_SEQUENCE_NONE (0 << 28) -# define PP_SEQUENCE_ON (1 << 28) -# define PP_SEQUENCE_OFF (2 << 28) -# define PP_SEQUENCE_MASK 0x30000000 -#define PP_CONTROL 0x61204 -# define POWER_TARGET_ON (1 << 0) - -#define LVDSPP_ON 0x61208 -#define LVDSPP_OFF 0x6120c -#define PP_CYCLE 0x61210 - -#define PFIT_CONTROL 0x61230 -# define PFIT_ENABLE (1 << 31) -# define PFIT_PIPE_MASK (3 << 29) -# define PFIT_PIPE_SHIFT 29 -# define VERT_INTERP_DISABLE (0 << 10) -# define VERT_INTERP_BILINEAR (1 << 10) -# define VERT_INTERP_MASK (3 << 10) -# define VERT_AUTO_SCALE (1 << 9) -# define HORIZ_INTERP_DISABLE (0 << 6) -# define HORIZ_INTERP_BILINEAR (1 << 6) -# define HORIZ_INTERP_MASK (3 << 6) -# define HORIZ_AUTO_SCALE (1 << 5) -# define PANEL_8TO6_DITHER_ENABLE (1 << 3) - -#define PFIT_PGM_RATIOS 0x61234 -# define PFIT_VERT_SCALE_MASK 0xfff00000 -# define PFIT_HORIZ_SCALE_MASK 0x0000fff0 - -#define PFIT_AUTO_RATIOS 0x61238 - - -#define DPLL_A 0x06014 -#define DPLL_B 0x06018 -# define DPLL_VCO_ENABLE (1 << 31) -# define DPLL_DVO_HIGH_SPEED (1 << 30) -# define DPLL_SYNCLOCK_ENABLE (1 << 29) -# define DPLL_VGA_MODE_DIS (1 << 28) -# define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */ -# define DPLLB_MODE_LVDS (2 << 26) /* i915 */ -# define DPLL_MODE_MASK (3 << 26) -# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */ -# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */ -# define DPLLB_LVDS_P2_CLOCK_DIV_14 (0 << 24) /* i915 */ -# define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */ -# define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */ -# define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */ -/** - * The i830 generation, in DAC/serial mode, defines p1 as two plus this - * bitfield, or just 2 if PLL_P1_DIVIDE_BY_TWO is set. - */ -# define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000 -/** - * The i830 generation, in LVDS mode, defines P1 as the bit number set within - * this field (only one bit may be set). - */ -# define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000 -# define DPLL_FPA01_P1_POST_DIV_SHIFT 16 -# define PLL_P2_DIVIDE_BY_4 (1 << 23) /* i830, required in DVO non-gang */ -# define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */ -# define PLL_REF_INPUT_DREFCLK (0 << 13) -# define PLL_REF_INPUT_TVCLKINA (1 << 13) /* i830 */ -# define PLL_REF_INPUT_TVCLKINBC (2 << 13) /* SDVO TVCLKIN */ -# define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13) -# define PLL_REF_INPUT_MASK (3 << 13) -# define PLL_LOAD_PULSE_PHASE_SHIFT 9 -/* - * Parallel to Serial Load Pulse phase selection. - * Selects the phase for the 10X DPLL clock for the PCIe - * digital display port. The range is 4 to 13; 10 or more - * is just a flip delay. The default is 6 - */ -# define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT) -# define DISPLAY_RATE_SELECT_FPA1 (1 << 8) - -/** - * SDVO multiplier for 945G/GM. Not used on 965. - * - * \sa DPLL_MD_UDI_MULTIPLIER_MASK - */ -# define SDVO_MULTIPLIER_MASK 0x000000ff -# define SDVO_MULTIPLIER_SHIFT_HIRES 4 -# define SDVO_MULTIPLIER_SHIFT_VGA 0 - -/** @defgroup DPLL_MD - * @{ - */ -/** Pipe A SDVO/UDI clock multiplier/divider register for G965. */ -#define DPLL_A_MD 0x0601c -/** Pipe B SDVO/UDI clock multiplier/divider register for G965. */ -#define DPLL_B_MD 0x06020 -/** - * UDI pixel divider, controlling how many pixels are stuffed into a packet. - * - * Value is pixels minus 1. Must be set to 1 pixel for SDVO. - */ -# define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000 -# define DPLL_MD_UDI_DIVIDER_SHIFT 24 -/** UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */ -# define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000 -# define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16 -/** - * SDVO/UDI pixel multiplier. - * - * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus - * clock rate is 10 times the DPLL clock. At low resolution/refresh rate - * modes, the bus rate would be below the limits, so SDVO allows for stuffing - * dummy bytes in the datastream at an increased clock rate, with both sides of - * the link knowing how many bytes are fill. - * - * So, for a mode with a dotclock of 65Mhz, we would want to double the clock - * rate to 130Mhz to get a bus rate of 1.30Ghz. The DPLL clock rate would be - * set to 130Mhz, and the SDVO multiplier set to 2x in this register and - * through an SDVO command. - * - * This register field has values of multiplication factor minus 1, with - * a maximum multiplier of 5 for SDVO. - */ -# define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00 -# define DPLL_MD_UDI_MULTIPLIER_SHIFT 8 -/** SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK. - * This best be set to the default value (3) or the CRT won't work. No, - * I don't entirely understand what this does... - */ -# define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f -# define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0 -/** @} */ - -#define DPLL_TEST 0x606c -# define DPLLB_TEST_SDVO_DIV_1 (0 << 22) -# define DPLLB_TEST_SDVO_DIV_2 (1 << 22) -# define DPLLB_TEST_SDVO_DIV_4 (2 << 22) -# define DPLLB_TEST_SDVO_DIV_MASK (3 << 22) -# define DPLLB_TEST_N_BYPASS (1 << 19) -# define DPLLB_TEST_M_BYPASS (1 << 18) -# define DPLLB_INPUT_BUFFER_ENABLE (1 << 16) -# define DPLLA_TEST_N_BYPASS (1 << 3) -# define DPLLA_TEST_M_BYPASS (1 << 2) -# define DPLLA_INPUT_BUFFER_ENABLE (1 << 0) - -#define ADPA 0x61100 -#define ADPA_DAC_ENABLE (1<<31) -#define ADPA_DAC_DISABLE 0 -#define ADPA_PIPE_SELECT_MASK (1<<30) -#define ADPA_PIPE_A_SELECT 0 -#define ADPA_PIPE_B_SELECT (1<<30) -#define ADPA_USE_VGA_HVPOLARITY (1<<15) -#define ADPA_SETS_HVPOLARITY 0 -#define ADPA_VSYNC_CNTL_DISABLE (1<<11) -#define ADPA_VSYNC_CNTL_ENABLE 0 -#define ADPA_HSYNC_CNTL_DISABLE (1<<10) -#define ADPA_HSYNC_CNTL_ENABLE 0 -#define ADPA_VSYNC_ACTIVE_HIGH (1<<4) -#define ADPA_VSYNC_ACTIVE_LOW 0 -#define ADPA_HSYNC_ACTIVE_HIGH (1<<3) -#define ADPA_HSYNC_ACTIVE_LOW 0 - -#define FPA0 0x06040 -#define FPA1 0x06044 -#define FPB0 0x06048 -#define FPB1 0x0604c -# define FP_N_DIV_MASK 0x003f0000 -# define FP_N_DIV_SHIFT 16 -# define FP_M1_DIV_MASK 0x00003f00 -# define FP_M1_DIV_SHIFT 8 -# define FP_M2_DIV_MASK 0x0000003f -# define FP_M2_DIV_SHIFT 0 - - -#define PORT_HOTPLUG_EN 0x61110 -# define SDVOB_HOTPLUG_INT_EN (1 << 26) -# define SDVOC_HOTPLUG_INT_EN (1 << 25) -# define TV_HOTPLUG_INT_EN (1 << 18) -# define CRT_HOTPLUG_INT_EN (1 << 9) -# define CRT_HOTPLUG_FORCE_DETECT (1 << 3) - -#define PORT_HOTPLUG_STAT 0x61114 -# define CRT_HOTPLUG_INT_STATUS (1 << 11) -# define TV_HOTPLUG_INT_STATUS (1 << 10) -# define CRT_HOTPLUG_MONITOR_MASK (3 << 8) -# define CRT_HOTPLUG_MONITOR_COLOR (3 << 8) -# define CRT_HOTPLUG_MONITOR_MONO (2 << 8) -# define CRT_HOTPLUG_MONITOR_NONE (0 << 8) -# define SDVOC_HOTPLUG_INT_STATUS (1 << 7) -# define SDVOB_HOTPLUG_INT_STATUS (1 << 6) - -#define SDVOB 0x61140 -#define SDVOC 0x61160 -#define SDVO_ENABLE (1 << 31) -#define SDVO_PIPE_B_SELECT (1 << 30) -#define SDVO_STALL_SELECT (1 << 29) -#define SDVO_INTERRUPT_ENABLE (1 << 26) /** - * 915G/GM SDVO pixel multiplier. + * Reads a dword out of the status page, which is written to from the command + * queue by automatic updates, MI_REPORT_HEAD, MI_STORE_DATA_INDEX, or + * MI_STORE_DATA_IMM. * - * Programmed value is multiplier - 1, up to 5x. - * - * \sa DPLL_MD_UDI_MULTIPLIER_MASK - */ -#define SDVO_PORT_MULTIPLY_MASK (7 << 23) -#define SDVO_PORT_MULTIPLY_SHIFT 23 -#define SDVO_PHASE_SELECT_MASK (15 << 19) -#define SDVO_PHASE_SELECT_DEFAULT (6 << 19) -#define SDVO_CLOCK_OUTPUT_INVERT (1 << 18) -#define SDVOC_GANG_MODE (1 << 16) -#define SDVO_BORDER_ENABLE (1 << 7) -#define SDVOB_PCIE_CONCURRENCY (1 << 3) -#define SDVO_DETECTED (1 << 2) -/* Bits to be preserved when writing */ -#define SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14)) -#define SDVOC_PRESERVE_MASK (1 << 17) - -/** @defgroup LVDS - * @{ - */ -/** - * This register controls the LVDS output enable, pipe selection, and data - * format selection. + * The following dwords have a reserved meaning: + * 0x00: ISR copy, updated when an ISR bit not set in the HWSTAM changes. + * 0x04: ring 0 head pointer + * 0x05: ring 1 head pointer (915-class) + * 0x06: ring 2 head pointer (915-class) + * 0x10-0x1b: Context status DWords (GM45) + * 0x1f: Last written status offset. (GM45) * - * All of the clock/data pairs are force powered down by power sequencing. - */ -#define LVDS 0x61180 -/** - * Enables the LVDS port. This bit must be set before DPLLs are enabled, as - * the DPLL semantics change when the LVDS is assigned to that pipe. - */ -# define LVDS_PORT_EN (1 << 31) -/** Selects pipe B for LVDS data. Must be set on pre-965. */ -# define LVDS_PIPEB_SELECT (1 << 30) - -/** - * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per - * pixel. - */ -# define LVDS_A0A2_CLKA_POWER_MASK (3 << 8) -# define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8) -# define LVDS_A0A2_CLKA_POWER_UP (3 << 8) -/** - * Controls the A3 data pair, which contains the additional LSBs for 24 bit - * mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be - * on. - */ -# define LVDS_A3_POWER_MASK (3 << 6) -# define LVDS_A3_POWER_DOWN (0 << 6) -# define LVDS_A3_POWER_UP (3 << 6) -/** - * Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP - * is set. - */ -# define LVDS_CLKB_POWER_MASK (3 << 4) -# define LVDS_CLKB_POWER_DOWN (0 << 4) -# define LVDS_CLKB_POWER_UP (3 << 4) - -/** - * Controls the B0-B3 data pairs. This must be set to match the DPLL p2 - * setting for whether we are in dual-channel mode. The B3 pair will - * additionally only be powered up when LVDS_A3_POWER_UP is set. - */ -# define LVDS_B0B3_POWER_MASK (3 << 2) -# define LVDS_B0B3_POWER_DOWN (0 << 2) -# define LVDS_B0B3_POWER_UP (3 << 2) - -#define PIPEACONF 0x70008 -#define PIPEACONF_ENABLE (1<<31) -#define PIPEACONF_DISABLE 0 -#define PIPEACONF_DOUBLE_WIDE (1<<30) -#define I965_PIPECONF_ACTIVE (1<<30) -#define PIPEACONF_SINGLE_WIDE 0 -#define PIPEACONF_PIPE_UNLOCKED 0 -#define PIPEACONF_PIPE_LOCKED (1<<25) -#define PIPEACONF_PALETTE 0 -#define PIPEACONF_GAMMA (1<<24) -#define PIPECONF_FORCE_BORDER (1<<25) -#define PIPECONF_PROGRESSIVE (0 << 21) -#define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21) -#define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21) - -#define DSPARB 0x70030 -#define DSPARB_CSTART_MASK (0x7f << 7) -#define DSPARB_CSTART_SHIFT 7 -#define DSPARB_BSTART_MASK (0x7f) -#define DSPARB_BSTART_SHIFT 0 - -#define PIPEBCONF 0x71008 -#define PIPEBCONF_ENABLE (1<<31) -#define PIPEBCONF_DISABLE 0 -#define PIPEBCONF_DOUBLE_WIDE (1<<30) -#define PIPEBCONF_DISABLE 0 -#define PIPEBCONF_GAMMA (1<<24) -#define PIPEBCONF_PALETTE 0 - -#define PIPEBGCMAXRED 0x71010 -#define PIPEBGCMAXGREEN 0x71014 -#define PIPEBGCMAXBLUE 0x71018 -#define PIPEBSTAT 0x71024 -#define PIPEBFRAMEHIGH 0x71040 -#define PIPEBFRAMEPIXEL 0x71044 - -#define DSPACNTR 0x70180 -#define DSPBCNTR 0x71180 -#define DISPLAY_PLANE_ENABLE (1<<31) -#define DISPLAY_PLANE_DISABLE 0 -#define DISPPLANE_GAMMA_ENABLE (1<<30) -#define DISPPLANE_GAMMA_DISABLE 0 -#define DISPPLANE_PIXFORMAT_MASK (0xf<<26) -#define DISPPLANE_8BPP (0x2<<26) -#define DISPPLANE_15_16BPP (0x4<<26) -#define DISPPLANE_16BPP (0x5<<26) -#define DISPPLANE_32BPP_NO_ALPHA (0x6<<26) -#define DISPPLANE_32BPP (0x7<<26) -#define DISPPLANE_STEREO_ENABLE (1<<25) -#define DISPPLANE_STEREO_DISABLE 0 -#define DISPPLANE_SEL_PIPE_MASK (1<<24) -#define DISPPLANE_SEL_PIPE_A 0 -#define DISPPLANE_SEL_PIPE_B (1<<24) -#define DISPPLANE_SRC_KEY_ENABLE (1<<22) -#define DISPPLANE_SRC_KEY_DISABLE 0 -#define DISPPLANE_LINE_DOUBLE (1<<20) -#define DISPPLANE_NO_LINE_DOUBLE 0 -#define DISPPLANE_STEREO_POLARITY_FIRST 0 -#define DISPPLANE_STEREO_POLARITY_SECOND (1<<18) -/* plane B only */ -#define DISPPLANE_ALPHA_TRANS_ENABLE (1<<15) -#define DISPPLANE_ALPHA_TRANS_DISABLE 0 -#define DISPPLANE_SPRITE_ABOVE_DISPLAYA 0 -#define DISPPLANE_SPRITE_ABOVE_OVERLAY (1) - -#define DSPABASE 0x70184 -#define DSPASTRIDE 0x70188 - -#define DSPBBASE 0x71184 -#define DSPBADDR DSPBBASE -#define DSPBSTRIDE 0x71188 - -#define DSPAKEYVAL 0x70194 -#define DSPAKEYMASK 0x70198 - -#define DSPAPOS 0x7018C /* reserved */ -#define DSPASIZE 0x70190 -#define DSPBPOS 0x7118C -#define DSPBSIZE 0x71190 - -#define DSPASURF 0x7019C -#define DSPATILEOFF 0x701A4 - -#define DSPBSURF 0x7119C -#define DSPBTILEOFF 0x711A4 - -#define VGACNTRL 0x71400 -# define VGA_DISP_DISABLE (1 << 31) -# define VGA_2X_MODE (1 << 30) -# define VGA_PIPE_B_SELECT (1 << 29) - -/* - * Some BIOS scratch area registers. The 845 (and 830?) store the amount - * of video memory available to the BIOS in SWF1. - */ - -#define SWF0 0x71410 - -/* - * 855 scratch registers. - */ -#define SWF10 0x70410 - -#define SWF30 0x72414 - -/* - * Overlay registers. These are overlay registers accessed via MMIO. - * Those loaded via the overlay register page are defined in i830_video.c. + * The area from dword 0x20 to 0x3ff is available for driver usage. */ -#define OVADD 0x30000 - -#define DOVSTA 0x30008 -#define OC_BUF (0x3<<20) +#define READ_HWSP(dev_priv, reg) (((volatile u32*)(dev_priv->hw_status_page))[reg]) +#define READ_BREADCRUMB(dev_priv) READ_HWSP(dev_priv, 5) +#define I915_GEM_HWS_INDEX 0x20 -#define OGAMC5 0x30010 -#define OGAMC4 0x30014 -#define OGAMC3 0x30018 -#define OGAMC2 0x3001c -#define OGAMC1 0x30020 -#define OGAMC0 0x30024 -/* - * Palette registers - */ -#define PALETTE_A 0x0a000 -#define PALETTE_B 0x0a800 +extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define IS_I830(dev) ((dev)->pci_device == 0x3577) #define IS_845G(dev) ((dev)->pci_device == 0x2562) @@ -1119,7 +639,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define IS_I965GM(dev) ((dev)->pci_device == 0x2A02) -#define IS_IGD_GM(dev) ((dev)->pci_device == 0x2A42) +#define IS_GM45(dev) ((dev)->pci_device == 0x2A42) #define IS_G4X(dev) ((dev)->pci_device == 0x2E02 || \ (dev)->pci_device == 0x2E12 || \ @@ -1133,9 +653,9 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); IS_I945GM(dev) || IS_I965G(dev) || IS_G33(dev)) #define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \ - IS_I945GM(dev) || IS_I965GM(dev) || IS_IGD_GM(dev)) + IS_I945GM(dev) || IS_I965GM(dev) || IS_GM45(dev)) -#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_IGD_GM(dev) || IS_G4X(dev)) +#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_GM45(dev) || IS_G4X(dev)) #define PRIMARY_RINGBUFFER_SIZE (128*1024) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c new file mode 100644 index 000000000000..9ac73dd1b422 --- /dev/null +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -0,0 +1,2558 @@ +/* + * Copyright © 2008 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * + */ + +#include "drmP.h" +#include "drm.h" +#include "i915_drm.h" +#include "i915_drv.h" +#include <linux/swap.h> + +static int +i915_gem_object_set_domain(struct drm_gem_object *obj, + uint32_t read_domains, + uint32_t write_domain); +static int +i915_gem_object_set_domain_range(struct drm_gem_object *obj, + uint64_t offset, + uint64_t size, + uint32_t read_domains, + uint32_t write_domain); +static int +i915_gem_set_domain(struct drm_gem_object *obj, + struct drm_file *file_priv, + uint32_t read_domains, + uint32_t write_domain); +static int i915_gem_object_get_page_list(struct drm_gem_object *obj); +static void i915_gem_object_free_page_list(struct drm_gem_object *obj); +static int i915_gem_object_wait_rendering(struct drm_gem_object *obj); + +static void +i915_gem_cleanup_ringbuffer(struct drm_device *dev); + +int +i915_gem_init_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_gem_init *args = data; + + mutex_lock(&dev->struct_mutex); + + if (args->gtt_start >= args->gtt_end || + (args->gtt_start & (PAGE_SIZE - 1)) != 0 || + (args->gtt_end & (PAGE_SIZE - 1)) != 0) { + mutex_unlock(&dev->struct_mutex); + return -EINVAL; + } + + drm_mm_init(&dev_priv->mm.gtt_space, args->gtt_start, + args->gtt_end - args->gtt_start); + + dev->gtt_total = (uint32_t) (args->gtt_end - args->gtt_start); + + mutex_unlock(&dev->struct_mutex); + + return 0; +} + + +/** + * Creates a new mm object and returns a handle to it. + */ +int +i915_gem_create_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_i915_gem_create *args = data; + struct drm_gem_object *obj; + int handle, ret; + + args->size = roundup(args->size, PAGE_SIZE); + + /* Allocate the new object */ + obj = drm_gem_object_alloc(dev, args->size); + if (obj == NULL) + return -ENOMEM; + + ret = drm_gem_handle_create(file_priv, obj, &handle); + mutex_lock(&dev->struct_mutex); + drm_gem_object_handle_unreference(obj); + mutex_unlock(&dev->struct_mutex); + + if (ret) + return ret; + + args->handle = handle; + + return 0; +} + +/** + * Reads data from the object referenced by handle. + * + * On error, the contents of *data are undefined. + */ +int +i915_gem_pread_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_i915_gem_pread *args = data; + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + ssize_t read; + loff_t offset; + int ret; + + obj = drm_gem_object_lookup(dev, file_priv, args->handle); + if (obj == NULL) + return -EBADF; + obj_priv = obj->driver_private; + + /* Bounds check source. + * + * XXX: This could use review for overflow issues... + */ + if (args->offset > obj->size || args->size > obj->size || + args->offset + args->size > obj->size) { + drm_gem_object_unreference(obj); + return -EINVAL; + } + + mutex_lock(&dev->struct_mutex); + + ret = i915_gem_object_set_domain_range(obj, args->offset, args->size, + I915_GEM_DOMAIN_CPU, 0); + if (ret != 0) { + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + return ret; + } + + offset = args->offset; + + read = vfs_read(obj->filp, (char __user *)(uintptr_t)args->data_ptr, + args->size, &offset); + if (read != args->size) { + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + if (read < 0) + return read; + else + return -EINVAL; + } + + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + + return 0; +} + +static int +i915_gem_gtt_pwrite(struct drm_device *dev, struct drm_gem_object *obj, + struct drm_i915_gem_pwrite *args, + struct drm_file *file_priv) +{ + struct drm_i915_gem_object *obj_priv = obj->driver_private; + ssize_t remain; + loff_t offset; + char __user *user_data; + char __iomem *vaddr; + char *vaddr_atomic; + int i, o, l; + int ret = 0; + unsigned long pfn; + unsigned long unwritten; + + user_data = (char __user *) (uintptr_t) args->data_ptr; + remain = args->size; + if (!access_ok(VERIFY_READ, user_data, remain)) + return -EFAULT; + + + mutex_lock(&dev->struct_mutex); + ret = i915_gem_object_pin(obj, 0); + if (ret) { + mutex_unlock(&dev->struct_mutex); + return ret; + } + ret = i915_gem_set_domain(obj, file_priv, + I915_GEM_DOMAIN_GTT, I915_GEM_DOMAIN_GTT); + if (ret) + goto fail; + + obj_priv = obj->driver_private; + offset = obj_priv->gtt_offset + args->offset; + obj_priv->dirty = 1; + + while (remain > 0) { + /* Operation in this page + * + * i = page number + * o = offset within page + * l = bytes to copy + */ + i = offset >> PAGE_SHIFT; + o = offset & (PAGE_SIZE-1); + l = remain; + if ((o + l) > PAGE_SIZE) + l = PAGE_SIZE - o; + + pfn = (dev->agp->base >> PAGE_SHIFT) + i; + +#ifdef CONFIG_HIGHMEM + /* This is a workaround for the low performance of iounmap + * (approximate 10% cpu cost on normal 3D workloads). + * kmap_atomic on HIGHMEM kernels happens to let us map card + * memory without taking IPIs. When the vmap rework lands + * we should be able to dump this hack. + */ + vaddr_atomic = kmap_atomic_pfn(pfn, KM_USER0); +#if WATCH_PWRITE + DRM_INFO("pwrite i %d o %d l %d pfn %ld vaddr %p\n", + i, o, l, pfn, vaddr_atomic); +#endif + unwritten = __copy_from_user_inatomic_nocache(vaddr_atomic + o, + user_data, l); + kunmap_atomic(vaddr_atomic, KM_USER0); + + if (unwritten) +#endif /* CONFIG_HIGHMEM */ + { + vaddr = ioremap_wc(pfn << PAGE_SHIFT, PAGE_SIZE); +#if WATCH_PWRITE + DRM_INFO("pwrite slow i %d o %d l %d " + "pfn %ld vaddr %p\n", + i, o, l, pfn, vaddr); +#endif + if (vaddr == NULL) { + ret = -EFAULT; + goto fail; + } + unwritten = __copy_from_user(vaddr + o, user_data, l); +#if WATCH_PWRITE + DRM_INFO("unwritten %ld\n", unwritten); +#endif + iounmap(vaddr); + if (unwritten) { + ret = -EFAULT; + goto fail; + } + } + + remain -= l; + user_data += l; + offset += l; + } +#if WATCH_PWRITE && 1 + i915_gem_clflush_object(obj); + i915_gem_dump_object(obj, args->offset + args->size, __func__, ~0); + i915_gem_clflush_object(obj); +#endif + +fail: + i915_gem_object_unpin(obj); + mutex_unlock(&dev->struct_mutex); + + return ret; +} + +static int +i915_gem_shmem_pwrite(struct drm_device *dev, struct drm_gem_object *obj, + struct drm_i915_gem_pwrite *args, + struct drm_file *file_priv) +{ + int ret; + loff_t offset; + ssize_t written; + + mutex_lock(&dev->struct_mutex); + + ret = i915_gem_set_domain(obj, file_priv, + I915_GEM_DOMAIN_CPU, I915_GEM_DOMAIN_CPU); + if (ret) { + mutex_unlock(&dev->struct_mutex); + return ret; + } + + offset = args->offset; + + written = vfs_write(obj->filp, + (char __user *)(uintptr_t) args->data_ptr, + args->size, &offset); + if (written != args->size) { + mutex_unlock(&dev->struct_mutex); + if (written < 0) + return written; + else + return -EINVAL; + } + + mutex_unlock(&dev->struct_mutex); + + return 0; +} + +/** + * Writes data to the object referenced by handle. + * + * On error, the contents of the buffer that were to be modified are undefined. + */ +int +i915_gem_pwrite_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_i915_gem_pwrite *args = data; + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + int ret = 0; + + obj = drm_gem_object_lookup(dev, file_priv, args->handle); + if (obj == NULL) + return -EBADF; + obj_priv = obj->driver_private; + + /* Bounds check destination. + * + * XXX: This could use review for overflow issues... + */ + if (args->offset > obj->size || args->size > obj->size || + args->offset + args->size > obj->size) { + drm_gem_object_unreference(obj); + return -EINVAL; + } + + /* We can only do the GTT pwrite on untiled buffers, as otherwise + * it would end up going through the fenced access, and we'll get + * different detiling behavior between reading and writing. + * pread/pwrite currently are reading and writing from the CPU + * perspective, requiring manual detiling by the client. + */ + if (obj_priv->tiling_mode == I915_TILING_NONE && + dev->gtt_total != 0) + ret = i915_gem_gtt_pwrite(dev, obj, args, file_priv); + else + ret = i915_gem_shmem_pwrite(dev, obj, args, file_priv); + +#if WATCH_PWRITE + if (ret) + DRM_INFO("pwrite failed %d\n", ret); +#endif + + drm_gem_object_unreference(obj); + + return ret; +} + +/** + * Called when user space prepares to use an object + */ +int +i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_i915_gem_set_domain *args = data; + struct drm_gem_object *obj; + int ret; + + if (!(dev->driver->driver_features & DRIVER_GEM)) + return -ENODEV; + + obj = drm_gem_object_lookup(dev, file_priv, args->handle); + if (obj == NULL) + return -EBADF; + + mutex_lock(&dev->struct_mutex); +#if WATCH_BUF + DRM_INFO("set_domain_ioctl %p(%d), %08x %08x\n", + obj, obj->size, args->read_domains, args->write_domain); +#endif + ret = i915_gem_set_domain(obj, file_priv, + args->read_domains, args->write_domain); + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + return ret; +} + +/** + * Called when user space has done writes to this buffer + */ +int +i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_i915_gem_sw_finish *args = data; + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + int ret = 0; + + if (!(dev->driver->driver_features & DRIVER_GEM)) + return -ENODEV; + + mutex_lock(&dev->struct_mutex); + obj = drm_gem_object_lookup(dev, file_priv, args->handle); + if (obj == NULL) { + mutex_unlock(&dev->struct_mutex); + return -EBADF; + } + +#if WATCH_BUF + DRM_INFO("%s: sw_finish %d (%p %d)\n", + __func__, args->handle, obj, obj->size); +#endif + obj_priv = obj->driver_private; + + /* Pinned buffers may be scanout, so flush the cache */ + if ((obj->write_domain & I915_GEM_DOMAIN_CPU) && obj_priv->pin_count) { + i915_gem_clflush_object(obj); + drm_agp_chipset_flush(dev); + } + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + return ret; +} + +/** + * Maps the contents of an object, returning the address it is mapped + * into. + * + * While the mapping holds a reference on the contents of the object, it doesn't + * imply a ref on the object itself. + */ +int +i915_gem_mmap_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_i915_gem_mmap *args = data; + struct drm_gem_object *obj; + loff_t offset; + unsigned long addr; + + if (!(dev->driver->driver_features & DRIVER_GEM)) + return -ENODEV; + + obj = drm_gem_object_lookup(dev, file_priv, args->handle); + if (obj == NULL) + return -EBADF; + + offset = args->offset; + + down_write(¤t->mm->mmap_sem); + addr = do_mmap(obj->filp, 0, args->size, + PROT_READ | PROT_WRITE, MAP_SHARED, + args->offset); + up_write(¤t->mm->mmap_sem); + mutex_lock(&dev->struct_mutex); + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + if (IS_ERR((void *)addr)) + return addr; + + args->addr_ptr = (uint64_t) addr; + + return 0; +} + +static void +i915_gem_object_free_page_list(struct drm_gem_object *obj) +{ + struct drm_i915_gem_object *obj_priv = obj->driver_private; + int page_count = obj->size / PAGE_SIZE; + int i; + + if (obj_priv->page_list == NULL) + return; + + + for (i = 0; i < page_count; i++) + if (obj_priv->page_list[i] != NULL) { + if (obj_priv->dirty) + set_page_dirty(obj_priv->page_list[i]); + mark_page_accessed(obj_priv->page_list[i]); + page_cache_release(obj_priv->page_list[i]); + } + obj_priv->dirty = 0; + + drm_free(obj_priv->page_list, + page_count * sizeof(struct page *), + DRM_MEM_DRIVER); + obj_priv->page_list = NULL; +} + +static void +i915_gem_object_move_to_active(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + + /* Add a reference if we're newly entering the active list. */ + if (!obj_priv->active) { + drm_gem_object_reference(obj); + obj_priv->active = 1; + } + /* Move from whatever list we were on to the tail of execution. */ + list_move_tail(&obj_priv->list, + &dev_priv->mm.active_list); +} + + +static void +i915_gem_object_move_to_inactive(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + + i915_verify_inactive(dev, __FILE__, __LINE__); + if (obj_priv->pin_count != 0) + list_del_init(&obj_priv->list); + else + list_move_tail(&obj_priv->list, &dev_priv->mm.inactive_list); + + if (obj_priv->active) { + obj_priv->active = 0; + drm_gem_object_unreference(obj); + } + i915_verify_inactive(dev, __FILE__, __LINE__); +} + +/** + * Creates a new sequence number, emitting a write of it to the status page + * plus an interrupt, which will trigger i915_user_interrupt_handler. + * + * Must be called with struct_lock held. + * + * Returned sequence numbers are nonzero on success. + */ +static uint32_t +i915_add_request(struct drm_device *dev, uint32_t flush_domains) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_gem_request *request; + uint32_t seqno; + int was_empty; + RING_LOCALS; + + request = drm_calloc(1, sizeof(*request), DRM_MEM_DRIVER); + if (request == NULL) + return 0; + + /* Grab the seqno we're going to make this request be, and bump the + * next (skipping 0 so it can be the reserved no-seqno value). + */ + seqno = dev_priv->mm.next_gem_seqno; + dev_priv->mm.next_gem_seqno++; + if (dev_priv->mm.next_gem_seqno == 0) + dev_priv->mm.next_gem_seqno++; + + BEGIN_LP_RING(4); + OUT_RING(MI_STORE_DWORD_INDEX); + OUT_RING(I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT); + OUT_RING(seqno); + + OUT_RING(MI_USER_INTERRUPT); + ADVANCE_LP_RING(); + + DRM_DEBUG("%d\n", seqno); + + request->seqno = seqno; + request->emitted_jiffies = jiffies; + request->flush_domains = flush_domains; + was_empty = list_empty(&dev_priv->mm.request_list); + list_add_tail(&request->list, &dev_priv->mm.request_list); + + if (was_empty && !dev_priv->mm.suspended) + schedule_delayed_work(&dev_priv->mm.retire_work, HZ); + return seqno; +} + +/** + * Command execution barrier + * + * Ensures that all commands in the ring are finished + * before signalling the CPU + */ +static uint32_t +i915_retire_commands(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + uint32_t cmd = MI_FLUSH | MI_NO_WRITE_FLUSH; + uint32_t flush_domains = 0; + RING_LOCALS; + + /* The sampler always gets flushed on i965 (sigh) */ + if (IS_I965G(dev)) + flush_domains |= I915_GEM_DOMAIN_SAMPLER; + BEGIN_LP_RING(2); + OUT_RING(cmd); + OUT_RING(0); /* noop */ + ADVANCE_LP_RING(); + return flush_domains; +} + +/** + * Moves buffers associated only with the given active seqno from the active + * to inactive list, potentially freeing them. + */ +static void +i915_gem_retire_request(struct drm_device *dev, + struct drm_i915_gem_request *request) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + + /* Move any buffers on the active list that are no longer referenced + * by the ringbuffer to the flushing/inactive lists as appropriate. + */ + while (!list_empty(&dev_priv->mm.active_list)) { + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + + obj_priv = list_first_entry(&dev_priv->mm.active_list, + struct drm_i915_gem_object, + list); + obj = obj_priv->obj; + + /* If the seqno being retired doesn't match the oldest in the + * list, then the oldest in the list must still be newer than + * this seqno. + */ + if (obj_priv->last_rendering_seqno != request->seqno) + return; +#if WATCH_LRU + DRM_INFO("%s: retire %d moves to inactive list %p\n", + __func__, request->seqno, obj); +#endif + + if (obj->write_domain != 0) { + list_move_tail(&obj_priv->list, + &dev_priv->mm.flushing_list); + } else { + i915_gem_object_move_to_inactive(obj); + } + } + + if (request->flush_domains != 0) { + struct drm_i915_gem_object *obj_priv, *next; + + /* Clear the write domain and activity from any buffers + * that are just waiting for a flush matching the one retired. + */ + list_for_each_entry_safe(obj_priv, next, + &dev_priv->mm.flushing_list, list) { + struct drm_gem_object *obj = obj_priv->obj; + + if (obj->write_domain & request->flush_domains) { + obj->write_domain = 0; + i915_gem_object_move_to_inactive(obj); + } + } + + } +} + +/** + * Returns true if seq1 is later than seq2. + */ +static int +i915_seqno_passed(uint32_t seq1, uint32_t seq2) +{ + return (int32_t)(seq1 - seq2) >= 0; +} + +uint32_t +i915_get_gem_seqno(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + + return READ_HWSP(dev_priv, I915_GEM_HWS_INDEX); +} + +/** + * This function clears the request list as sequence numbers are passed. + */ +void +i915_gem_retire_requests(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + uint32_t seqno; + + seqno = i915_get_gem_seqno(dev); + + while (!list_empty(&dev_priv->mm.request_list)) { + struct drm_i915_gem_request *request; + uint32_t retiring_seqno; + + request = list_first_entry(&dev_priv->mm.request_list, + struct drm_i915_gem_request, + list); + retiring_seqno = request->seqno; + + if (i915_seqno_passed(seqno, retiring_seqno) || + dev_priv->mm.wedged) { + i915_gem_retire_request(dev, request); + + list_del(&request->list); + drm_free(request, sizeof(*request), DRM_MEM_DRIVER); + } else + break; + } +} + +void +i915_gem_retire_work_handler(struct work_struct *work) +{ + drm_i915_private_t *dev_priv; + struct drm_device *dev; + + dev_priv = container_of(work, drm_i915_private_t, + mm.retire_work.work); + dev = dev_priv->dev; + + mutex_lock(&dev->struct_mutex); + i915_gem_retire_requests(dev); + if (!dev_priv->mm.suspended && + !list_empty(&dev_priv->mm.request_list)) + schedule_delayed_work(&dev_priv->mm.retire_work, HZ); + mutex_unlock(&dev->struct_mutex); +} + +/** + * Waits for a sequence number to be signaled, and cleans up the + * request and object lists appropriately for that event. + */ +static int +i915_wait_request(struct drm_device *dev, uint32_t seqno) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + int ret = 0; + + BUG_ON(seqno == 0); + + if (!i915_seqno_passed(i915_get_gem_seqno(dev), seqno)) { + dev_priv->mm.waiting_gem_seqno = seqno; + i915_user_irq_get(dev); + ret = wait_event_interruptible(dev_priv->irq_queue, + i915_seqno_passed(i915_get_gem_seqno(dev), + seqno) || + dev_priv->mm.wedged); + i915_user_irq_put(dev); + dev_priv->mm.waiting_gem_seqno = 0; + } + if (dev_priv->mm.wedged) + ret = -EIO; + + if (ret && ret != -ERESTARTSYS) + DRM_ERROR("%s returns %d (awaiting %d at %d)\n", + __func__, ret, seqno, i915_get_gem_seqno(dev)); + + /* Directly dispatch request retiring. While we have the work queue + * to handle this, the waiter on a request often wants an associated + * buffer to have made it to the inactive list, and we would need + * a separate wait queue to handle that. + */ + if (ret == 0) + i915_gem_retire_requests(dev); + + return ret; +} + +static void +i915_gem_flush(struct drm_device *dev, + uint32_t invalidate_domains, + uint32_t flush_domains) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + uint32_t cmd; + RING_LOCALS; + +#if WATCH_EXEC + DRM_INFO("%s: invalidate %08x flush %08x\n", __func__, + invalidate_domains, flush_domains); +#endif + + if (flush_domains & I915_GEM_DOMAIN_CPU) + drm_agp_chipset_flush(dev); + + if ((invalidate_domains | flush_domains) & ~(I915_GEM_DOMAIN_CPU | + I915_GEM_DOMAIN_GTT)) { + /* + * read/write caches: + * + * I915_GEM_DOMAIN_RENDER is always invalidated, but is + * only flushed if MI_NO_WRITE_FLUSH is unset. On 965, it is + * also flushed at 2d versus 3d pipeline switches. + * + * read-only caches: + * + * I915_GEM_DOMAIN_SAMPLER is flushed on pre-965 if + * MI_READ_FLUSH is set, and is always flushed on 965. + * + * I915_GEM_DOMAIN_COMMAND may not exist? + * + * I915_GEM_DOMAIN_INSTRUCTION, which exists on 965, is + * invalidated when MI_EXE_FLUSH is set. + * + * I915_GEM_DOMAIN_VERTEX, which exists on 965, is + * invalidated with every MI_FLUSH. + * + * TLBs: + * + * On 965, TLBs associated with I915_GEM_DOMAIN_COMMAND + * and I915_GEM_DOMAIN_CPU in are invalidated at PTE write and + * I915_GEM_DOMAIN_RENDER and I915_GEM_DOMAIN_SAMPLER + * are flushed at any MI_FLUSH. + */ + + cmd = MI_FLUSH | MI_NO_WRITE_FLUSH; + if ((invalidate_domains|flush_domains) & + I915_GEM_DOMAIN_RENDER) + cmd &= ~MI_NO_WRITE_FLUSH; + if (!IS_I965G(dev)) { + /* + * On the 965, the sampler cache always gets flushed + * and this bit is reserved. + */ + if (invalidate_domains & I915_GEM_DOMAIN_SAMPLER) + cmd |= MI_READ_FLUSH; + } + if (invalidate_domains & I915_GEM_DOMAIN_INSTRUCTION) + cmd |= MI_EXE_FLUSH; + +#if WATCH_EXEC + DRM_INFO("%s: queue flush %08x to ring\n", __func__, cmd); +#endif + BEGIN_LP_RING(2); + OUT_RING(cmd); + OUT_RING(0); /* noop */ + ADVANCE_LP_RING(); + } +} + +/** + * Ensures that all rendering to the object has completed and the object is + * safe to unbind from the GTT or access from the CPU. + */ +static int +i915_gem_object_wait_rendering(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + int ret; + + /* If there are writes queued to the buffer, flush and + * create a new seqno to wait for. + */ + if (obj->write_domain & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)) { + uint32_t write_domain = obj->write_domain; +#if WATCH_BUF + DRM_INFO("%s: flushing object %p from write domain %08x\n", + __func__, obj, write_domain); +#endif + i915_gem_flush(dev, 0, write_domain); + + i915_gem_object_move_to_active(obj); + obj_priv->last_rendering_seqno = i915_add_request(dev, + write_domain); + BUG_ON(obj_priv->last_rendering_seqno == 0); +#if WATCH_LRU + DRM_INFO("%s: flush moves to exec list %p\n", __func__, obj); +#endif + } + + /* If there is rendering queued on the buffer being evicted, wait for + * it. + */ + if (obj_priv->active) { +#if WATCH_BUF + DRM_INFO("%s: object %p wait for seqno %08x\n", + __func__, obj, obj_priv->last_rendering_seqno); +#endif + ret = i915_wait_request(dev, obj_priv->last_rendering_seqno); + if (ret != 0) + return ret; + } + + return 0; +} + +/** + * Unbinds an object from the GTT aperture. + */ +static int +i915_gem_object_unbind(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + int ret = 0; + +#if WATCH_BUF + DRM_INFO("%s:%d %p\n", __func__, __LINE__, obj); + DRM_INFO("gtt_space %p\n", obj_priv->gtt_space); +#endif + if (obj_priv->gtt_space == NULL) + return 0; + + if (obj_priv->pin_count != 0) { + DRM_ERROR("Attempting to unbind pinned buffer\n"); + return -EINVAL; + } + + /* Wait for any rendering to complete + */ + ret = i915_gem_object_wait_rendering(obj); + if (ret) { + DRM_ERROR("wait_rendering failed: %d\n", ret); + return ret; + } + + /* Move the object to the CPU domain to ensure that + * any possible CPU writes while it's not in the GTT + * are flushed when we go to remap it. This will + * also ensure that all pending GPU writes are finished + * before we unbind. + */ + ret = i915_gem_object_set_domain(obj, I915_GEM_DOMAIN_CPU, + I915_GEM_DOMAIN_CPU); + if (ret) { + DRM_ERROR("set_domain failed: %d\n", ret); + return ret; + } + + if (obj_priv->agp_mem != NULL) { + drm_unbind_agp(obj_priv->agp_mem); + drm_free_agp(obj_priv->agp_mem, obj->size / PAGE_SIZE); + obj_priv->agp_mem = NULL; + } + + BUG_ON(obj_priv->active); + + i915_gem_object_free_page_list(obj); + + if (obj_priv->gtt_space) { + atomic_dec(&dev->gtt_count); + atomic_sub(obj->size, &dev->gtt_memory); + + drm_mm_put_block(obj_priv->gtt_space); + obj_priv->gtt_space = NULL; + } + + /* Remove ourselves from the LRU list if present. */ + if (!list_empty(&obj_priv->list)) + list_del_init(&obj_priv->list); + + return 0; +} + +static int +i915_gem_evict_something(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + int ret = 0; + + for (;;) { + /* If there's an inactive buffer available now, grab it + * and be done. + */ + if (!list_empty(&dev_priv->mm.inactive_list)) { + obj_priv = list_first_entry(&dev_priv->mm.inactive_list, + struct drm_i915_gem_object, + list); + obj = obj_priv->obj; + BUG_ON(obj_priv->pin_count != 0); +#if WATCH_LRU + DRM_INFO("%s: evicting %p\n", __func__, obj); +#endif + BUG_ON(obj_priv->active); + + /* Wait on the rendering and unbind the buffer. */ + ret = i915_gem_object_unbind(obj); + break; + } + + /* If we didn't get anything, but the ring is still processing + * things, wait for one of those things to finish and hopefully + * leave us a buffer to evict. + */ + if (!list_empty(&dev_priv->mm.request_list)) { + struct drm_i915_gem_request *request; + + request = list_first_entry(&dev_priv->mm.request_list, + struct drm_i915_gem_request, + list); + + ret = i915_wait_request(dev, request->seqno); + if (ret) + break; + + /* if waiting caused an object to become inactive, + * then loop around and wait for it. Otherwise, we + * assume that waiting freed and unbound something, + * so there should now be some space in the GTT + */ + if (!list_empty(&dev_priv->mm.inactive_list)) + continue; + break; + } + + /* If we didn't have anything on the request list but there + * are buffers awaiting a flush, emit one and try again. + * When we wait on it, those buffers waiting for that flush + * will get moved to inactive. + */ + if (!list_empty(&dev_priv->mm.flushing_list)) { + obj_priv = list_first_entry(&dev_priv->mm.flushing_list, + struct drm_i915_gem_object, + list); + obj = obj_priv->obj; + + i915_gem_flush(dev, + obj->write_domain, + obj->write_domain); + i915_add_request(dev, obj->write_domain); + + obj = NULL; + continue; + } + + DRM_ERROR("inactive empty %d request empty %d " + "flushing empty %d\n", + list_empty(&dev_priv->mm.inactive_list), + list_empty(&dev_priv->mm.request_list), + list_empty(&dev_priv->mm.flushing_list)); + /* If we didn't do any of the above, there's nothing to be done + * and we just can't fit it in. + */ + return -ENOMEM; + } + return ret; +} + +static int +i915_gem_object_get_page_list(struct drm_gem_object *obj) +{ + struct drm_i915_gem_object *obj_priv = obj->driver_private; + int page_count, i; + struct address_space *mapping; + struct inode *inode; + struct page *page; + int ret; + + if (obj_priv->page_list) + return 0; + + /* Get the list of pages out of our struct file. They'll be pinned + * at this point until we release them. + */ + page_count = obj->size / PAGE_SIZE; + BUG_ON(obj_priv->page_list != NULL); + obj_priv->page_list = drm_calloc(page_count, sizeof(struct page *), + DRM_MEM_DRIVER); + if (obj_priv->page_list == NULL) { + DRM_ERROR("Faled to allocate page list\n"); + return -ENOMEM; + } + + inode = obj->filp->f_path.dentry->d_inode; + mapping = inode->i_mapping; + for (i = 0; i < page_count; i++) { + page = read_mapping_page(mapping, i, NULL); + if (IS_ERR(page)) { + ret = PTR_ERR(page); + DRM_ERROR("read_mapping_page failed: %d\n", ret); + i915_gem_object_free_page_list(obj); + return ret; + } + obj_priv->page_list[i] = page; + } + return 0; +} + +/** + * Finds free space in the GTT aperture and binds the object there. + */ +static int +i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment) +{ + struct drm_device *dev = obj->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + struct drm_mm_node *free_space; + int page_count, ret; + + if (alignment == 0) + alignment = PAGE_SIZE; + if (alignment & (PAGE_SIZE - 1)) { + DRM_ERROR("Invalid object alignment requested %u\n", alignment); + return -EINVAL; + } + + search_free: + free_space = drm_mm_search_free(&dev_priv->mm.gtt_space, + obj->size, alignment, 0); + if (free_space != NULL) { + obj_priv->gtt_space = drm_mm_get_block(free_space, obj->size, + alignment); + if (obj_priv->gtt_space != NULL) { + obj_priv->gtt_space->private = obj; + obj_priv->gtt_offset = obj_priv->gtt_space->start; + } + } + if (obj_priv->gtt_space == NULL) { + /* If the gtt is empty and we're still having trouble + * fitting our object in, we're out of memory. + */ +#if WATCH_LRU + DRM_INFO("%s: GTT full, evicting something\n", __func__); +#endif + if (list_empty(&dev_priv->mm.inactive_list) && + list_empty(&dev_priv->mm.flushing_list) && + list_empty(&dev_priv->mm.active_list)) { + DRM_ERROR("GTT full, but LRU list empty\n"); + return -ENOMEM; + } + + ret = i915_gem_evict_something(dev); + if (ret != 0) { + DRM_ERROR("Failed to evict a buffer %d\n", ret); + return ret; + } + goto search_free; + } + +#if WATCH_BUF + DRM_INFO("Binding object of size %d at 0x%08x\n", + obj->size, obj_priv->gtt_offset); +#endif + ret = i915_gem_object_get_page_list(obj); + if (ret) { + drm_mm_put_block(obj_priv->gtt_space); + obj_priv->gtt_space = NULL; + return ret; + } + + page_count = obj->size / PAGE_SIZE; + /* Create an AGP memory structure pointing at our pages, and bind it + * into the GTT. + */ + obj_priv->agp_mem = drm_agp_bind_pages(dev, + obj_priv->page_list, + page_count, + obj_priv->gtt_offset, + obj_priv->agp_type); + if (obj_priv->agp_mem == NULL) { + i915_gem_object_free_page_list(obj); + drm_mm_put_block(obj_priv->gtt_space); + obj_priv->gtt_space = NULL; + return -ENOMEM; + } + atomic_inc(&dev->gtt_count); + atomic_add(obj->size, &dev->gtt_memory); + + /* Assert that the object is not currently in any GPU domain. As it + * wasn't in the GTT, there shouldn't be any way it could have been in + * a GPU cache + */ + BUG_ON(obj->read_domains & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)); + BUG_ON(obj->write_domain & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)); + + return 0; +} + +void +i915_gem_clflush_object(struct drm_gem_object *obj) +{ + struct drm_i915_gem_object *obj_priv = obj->driver_private; + + /* If we don't have a page list set up, then we're not pinned + * to GPU, and we can ignore the cache flush because it'll happen + * again at bind time. + */ + if (obj_priv->page_list == NULL) + return; + + drm_clflush_pages(obj_priv->page_list, obj->size / PAGE_SIZE); +} + +/* + * Set the next domain for the specified object. This + * may not actually perform the necessary flushing/invaliding though, + * as that may want to be batched with other set_domain operations + * + * This is (we hope) the only really tricky part of gem. The goal + * is fairly simple -- track which caches hold bits of the object + * and make sure they remain coherent. A few concrete examples may + * help to explain how it works. For shorthand, we use the notation + * (read_domains, write_domain), e.g. (CPU, CPU) to indicate the + * a pair of read and write domain masks. + * + * Case 1: the batch buffer + * + * 1. Allocated + * 2. Written by CPU + * 3. Mapped to GTT + * 4. Read by GPU + * 5. Unmapped from GTT + * 6. Freed + * + * Let's take these a step at a time + * + * 1. Allocated + * Pages allocated from the kernel may still have + * cache contents, so we set them to (CPU, CPU) always. + * 2. Written by CPU (using pwrite) + * The pwrite function calls set_domain (CPU, CPU) and + * this function does nothing (as nothing changes) + * 3. Mapped by GTT + * This function asserts that the object is not + * currently in any GPU-based read or write domains + * 4. Read by GPU + * i915_gem_execbuffer calls set_domain (COMMAND, 0). + * As write_domain is zero, this function adds in the + * current read domains (CPU+COMMAND, 0). + * flush_domains is set to CPU. + * invalidate_domains is set to COMMAND + * clflush is run to get data out of the CPU caches + * then i915_dev_set_domain calls i915_gem_flush to + * emit an MI_FLUSH and drm_agp_chipset_flush + * 5. Unmapped from GTT + * i915_gem_object_unbind calls set_domain (CPU, CPU) + * flush_domains and invalidate_domains end up both zero + * so no flushing/invalidating happens + * 6. Freed + * yay, done + * + * Case 2: The shared render buffer + * + * 1. Allocated + * 2. Mapped to GTT + * 3. Read/written by GPU + * 4. set_domain to (CPU,CPU) + * 5. Read/written by CPU + * 6. Read/written by GPU + * + * 1. Allocated + * Same as last example, (CPU, CPU) + * 2. Mapped to GTT + * Nothing changes (assertions find that it is not in the GPU) + * 3. Read/written by GPU + * execbuffer calls set_domain (RENDER, RENDER) + * flush_domains gets CPU + * invalidate_domains gets GPU + * clflush (obj) + * MI_FLUSH and drm_agp_chipset_flush + * 4. set_domain (CPU, CPU) + * flush_domains gets GPU + * invalidate_domains gets CPU + * wait_rendering (obj) to make sure all drawing is complete. + * This will include an MI_FLUSH to get the data from GPU + * to memory + * clflush (obj) to invalidate the CPU cache + * Another MI_FLUSH in i915_gem_flush (eliminate this somehow?) + * 5. Read/written by CPU + * cache lines are loaded and dirtied + * 6. Read written by GPU + * Same as last GPU access + * + * Case 3: The constant buffer + * + * 1. Allocated + * 2. Written by CPU + * 3. Read by GPU + * 4. Updated (written) by CPU again + * 5. Read by GPU + * + * 1. Allocated + * (CPU, CPU) + * 2. Written by CPU + * (CPU, CPU) + * 3. Read by GPU + * (CPU+RENDER, 0) + * flush_domains = CPU + * invalidate_domains = RENDER + * clflush (obj) + * MI_FLUSH + * drm_agp_chipset_flush + * 4. Updated (written) by CPU again + * (CPU, CPU) + * flush_domains = 0 (no previous write domain) + * invalidate_domains = 0 (no new read domains) + * 5. Read by GPU + * (CPU+RENDER, 0) + * flush_domains = CPU + * invalidate_domains = RENDER + * clflush (obj) + * MI_FLUSH + * drm_agp_chipset_flush + */ +static int +i915_gem_object_set_domain(struct drm_gem_object *obj, + uint32_t read_domains, + uint32_t write_domain) +{ + struct drm_device *dev = obj->dev; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + uint32_t invalidate_domains = 0; + uint32_t flush_domains = 0; + int ret; + +#if WATCH_BUF + DRM_INFO("%s: object %p read %08x -> %08x write %08x -> %08x\n", + __func__, obj, + obj->read_domains, read_domains, + obj->write_domain, write_domain); +#endif + /* + * If the object isn't moving to a new write domain, + * let the object stay in multiple read domains + */ + if (write_domain == 0) + read_domains |= obj->read_domains; + else + obj_priv->dirty = 1; + + /* + * Flush the current write domain if + * the new read domains don't match. Invalidate + * any read domains which differ from the old + * write domain + */ + if (obj->write_domain && obj->write_domain != read_domains) { + flush_domains |= obj->write_domain; + invalidate_domains |= read_domains & ~obj->write_domain; + } + /* + * Invalidate any read caches which may have + * stale data. That is, any new read domains. + */ + invalidate_domains |= read_domains & ~obj->read_domains; + if ((flush_domains | invalidate_domains) & I915_GEM_DOMAIN_CPU) { +#if WATCH_BUF + DRM_INFO("%s: CPU domain flush %08x invalidate %08x\n", + __func__, flush_domains, invalidate_domains); +#endif + /* + * If we're invaliding the CPU cache and flushing a GPU cache, + * then pause for rendering so that the GPU caches will be + * flushed before the cpu cache is invalidated + */ + if ((invalidate_domains & I915_GEM_DOMAIN_CPU) && + (flush_domains & ~(I915_GEM_DOMAIN_CPU | + I915_GEM_DOMAIN_GTT))) { + ret = i915_gem_object_wait_rendering(obj); + if (ret) + return ret; + } + i915_gem_clflush_object(obj); + } + + if ((write_domain | flush_domains) != 0) + obj->write_domain = write_domain; + + /* If we're invalidating the CPU domain, clear the per-page CPU + * domain list as well. + */ + if (obj_priv->page_cpu_valid != NULL && + (write_domain != 0 || + read_domains & I915_GEM_DOMAIN_CPU)) { + drm_free(obj_priv->page_cpu_valid, obj->size / PAGE_SIZE, + DRM_MEM_DRIVER); + obj_priv->page_cpu_valid = NULL; + } + obj->read_domains = read_domains; + + dev->invalidate_domains |= invalidate_domains; + dev->flush_domains |= flush_domains; +#if WATCH_BUF + DRM_INFO("%s: read %08x write %08x invalidate %08x flush %08x\n", + __func__, + obj->read_domains, obj->write_domain, + dev->invalidate_domains, dev->flush_domains); +#endif + return 0; +} + +/** + * Set the read/write domain on a range of the object. + * + * Currently only implemented for CPU reads, otherwise drops to normal + * i915_gem_object_set_domain(). + */ +static int +i915_gem_object_set_domain_range(struct drm_gem_object *obj, + uint64_t offset, + uint64_t size, + uint32_t read_domains, + uint32_t write_domain) +{ + struct drm_i915_gem_object *obj_priv = obj->driver_private; + int ret, i; + + if (obj->read_domains & I915_GEM_DOMAIN_CPU) + return 0; + + if (read_domains != I915_GEM_DOMAIN_CPU || + write_domain != 0) + return i915_gem_object_set_domain(obj, + read_domains, write_domain); + + /* Wait on any GPU rendering to the object to be flushed. */ + if (obj->write_domain & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) { + ret = i915_gem_object_wait_rendering(obj); + if (ret) + return ret; + } + + if (obj_priv->page_cpu_valid == NULL) { + obj_priv->page_cpu_valid = drm_calloc(1, obj->size / PAGE_SIZE, + DRM_MEM_DRIVER); + } + + /* Flush the cache on any pages that are still invalid from the CPU's + * perspective. + */ + for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE; i++) { + if (obj_priv->page_cpu_valid[i]) + continue; + + drm_clflush_pages(obj_priv->page_list + i, 1); + + obj_priv->page_cpu_valid[i] = 1; + } + + return 0; +} + +/** + * Once all of the objects have been set in the proper domain, + * perform the necessary flush and invalidate operations. + * + * Returns the write domains flushed, for use in flush tracking. + */ +static uint32_t +i915_gem_dev_set_domain(struct drm_device *dev) +{ + uint32_t flush_domains = dev->flush_domains; + + /* + * Now that all the buffers are synced to the proper domains, + * flush and invalidate the collected domains + */ + if (dev->invalidate_domains | dev->flush_domains) { +#if WATCH_EXEC + DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n", + __func__, + dev->invalidate_domains, + dev->flush_domains); +#endif + i915_gem_flush(dev, + dev->invalidate_domains, + dev->flush_domains); + dev->invalidate_domains = 0; + dev->flush_domains = 0; + } + + return flush_domains; +} + +/** + * Pin an object to the GTT and evaluate the relocations landing in it. + */ +static int +i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, + struct drm_file *file_priv, + struct drm_i915_gem_exec_object *entry) +{ + struct drm_device *dev = obj->dev; + struct drm_i915_gem_relocation_entry reloc; + struct drm_i915_gem_relocation_entry __user *relocs; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + int i, ret; + uint32_t last_reloc_offset = -1; + void __iomem *reloc_page = NULL; + + /* Choose the GTT offset for our buffer and put it there. */ + ret = i915_gem_object_pin(obj, (uint32_t) entry->alignment); + if (ret) + return ret; + + entry->offset = obj_priv->gtt_offset; + + relocs = (struct drm_i915_gem_relocation_entry __user *) + (uintptr_t) entry->relocs_ptr; + /* Apply the relocations, using the GTT aperture to avoid cache + * flushing requirements. + */ + for (i = 0; i < entry->relocation_count; i++) { + struct drm_gem_object *target_obj; + struct drm_i915_gem_object *target_obj_priv; + uint32_t reloc_val, reloc_offset; + uint32_t __iomem *reloc_entry; + + ret = copy_from_user(&reloc, relocs + i, sizeof(reloc)); + if (ret != 0) { + i915_gem_object_unpin(obj); + return ret; + } + + target_obj = drm_gem_object_lookup(obj->dev, file_priv, + reloc.target_handle); + if (target_obj == NULL) { + i915_gem_object_unpin(obj); + return -EBADF; + } + target_obj_priv = target_obj->driver_private; + + /* The target buffer should have appeared before us in the + * exec_object list, so it should have a GTT space bound by now. + */ + if (target_obj_priv->gtt_space == NULL) { + DRM_ERROR("No GTT space found for object %d\n", + reloc.target_handle); + drm_gem_object_unreference(target_obj); + i915_gem_object_unpin(obj); + return -EINVAL; + } + + if (reloc.offset > obj->size - 4) { + DRM_ERROR("Relocation beyond object bounds: " + "obj %p target %d offset %d size %d.\n", + obj, reloc.target_handle, + (int) reloc.offset, (int) obj->size); + drm_gem_object_unreference(target_obj); + i915_gem_object_unpin(obj); + return -EINVAL; + } + if (reloc.offset & 3) { + DRM_ERROR("Relocation not 4-byte aligned: " + "obj %p target %d offset %d.\n", + obj, reloc.target_handle, + (int) reloc.offset); + drm_gem_object_unreference(target_obj); + i915_gem_object_unpin(obj); + return -EINVAL; + } + + if (reloc.write_domain && target_obj->pending_write_domain && + reloc.write_domain != target_obj->pending_write_domain) { + DRM_ERROR("Write domain conflict: " + "obj %p target %d offset %d " + "new %08x old %08x\n", + obj, reloc.target_handle, + (int) reloc.offset, + reloc.write_domain, + target_obj->pending_write_domain); + drm_gem_object_unreference(target_obj); + i915_gem_object_unpin(obj); + return -EINVAL; + } + +#if WATCH_RELOC + DRM_INFO("%s: obj %p offset %08x target %d " + "read %08x write %08x gtt %08x " + "presumed %08x delta %08x\n", + __func__, + obj, + (int) reloc.offset, + (int) reloc.target_handle, + (int) reloc.read_domains, + (int) reloc.write_domain, + (int) target_obj_priv->gtt_offset, + (int) reloc.presumed_offset, + reloc.delta); +#endif + + target_obj->pending_read_domains |= reloc.read_domains; + target_obj->pending_write_domain |= reloc.write_domain; + + /* If the relocation already has the right value in it, no + * more work needs to be done. + */ + if (target_obj_priv->gtt_offset == reloc.presumed_offset) { + drm_gem_object_unreference(target_obj); + continue; + } + + /* Now that we're going to actually write some data in, + * make sure that any rendering using this buffer's contents + * is completed. + */ + i915_gem_object_wait_rendering(obj); + + /* As we're writing through the gtt, flush + * any CPU writes before we write the relocations + */ + if (obj->write_domain & I915_GEM_DOMAIN_CPU) { + i915_gem_clflush_object(obj); + drm_agp_chipset_flush(dev); + obj->write_domain = 0; + } + + /* Map the page containing the relocation we're going to + * perform. + */ + reloc_offset = obj_priv->gtt_offset + reloc.offset; + if (reloc_page == NULL || + (last_reloc_offset & ~(PAGE_SIZE - 1)) != + (reloc_offset & ~(PAGE_SIZE - 1))) { + if (reloc_page != NULL) + iounmap(reloc_page); + + reloc_page = ioremap_wc(dev->agp->base + + (reloc_offset & + ~(PAGE_SIZE - 1)), + PAGE_SIZE); + last_reloc_offset = reloc_offset; + if (reloc_page == NULL) { + drm_gem_object_unreference(target_obj); + i915_gem_object_unpin(obj); + return -ENOMEM; + } + } + + reloc_entry = (uint32_t __iomem *)(reloc_page + + (reloc_offset & (PAGE_SIZE - 1))); + reloc_val = target_obj_priv->gtt_offset + reloc.delta; + +#if WATCH_BUF + DRM_INFO("Applied relocation: %p@0x%08x %08x -> %08x\n", + obj, (unsigned int) reloc.offset, + readl(reloc_entry), reloc_val); +#endif + writel(reloc_val, reloc_entry); + + /* Write the updated presumed offset for this entry back out + * to the user. + */ + reloc.presumed_offset = target_obj_priv->gtt_offset; + ret = copy_to_user(relocs + i, &reloc, sizeof(reloc)); + if (ret != 0) { + drm_gem_object_unreference(target_obj); + i915_gem_object_unpin(obj); + return ret; + } + + drm_gem_object_unreference(target_obj); + } + + if (reloc_page != NULL) + iounmap(reloc_page); + +#if WATCH_BUF + if (0) + i915_gem_dump_object(obj, 128, __func__, ~0); +#endif + return 0; +} + +/** Dispatch a batchbuffer to the ring + */ +static int +i915_dispatch_gem_execbuffer(struct drm_device *dev, + struct drm_i915_gem_execbuffer *exec, + uint64_t exec_offset) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_clip_rect __user *boxes = (struct drm_clip_rect __user *) + (uintptr_t) exec->cliprects_ptr; + int nbox = exec->num_cliprects; + int i = 0, count; + uint32_t exec_start, exec_len; + RING_LOCALS; + + exec_start = (uint32_t) exec_offset + exec->batch_start_offset; + exec_len = (uint32_t) exec->batch_len; + + if ((exec_start | exec_len) & 0x7) { + DRM_ERROR("alignment\n"); + return -EINVAL; + } + + if (!exec_start) + return -EINVAL; + + count = nbox ? nbox : 1; + + for (i = 0; i < count; i++) { + if (i < nbox) { + int ret = i915_emit_box(dev, boxes, i, + exec->DR1, exec->DR4); + if (ret) + return ret; + } + + if (IS_I830(dev) || IS_845G(dev)) { + BEGIN_LP_RING(4); + OUT_RING(MI_BATCH_BUFFER); + OUT_RING(exec_start | MI_BATCH_NON_SECURE); + OUT_RING(exec_start + exec_len - 4); + OUT_RING(0); + ADVANCE_LP_RING(); + } else { + BEGIN_LP_RING(2); + if (IS_I965G(dev)) { + OUT_RING(MI_BATCH_BUFFER_START | + (2 << 6) | + MI_BATCH_NON_SECURE_I965); + OUT_RING(exec_start); + } else { + OUT_RING(MI_BATCH_BUFFER_START | + (2 << 6)); + OUT_RING(exec_start | MI_BATCH_NON_SECURE); + } + ADVANCE_LP_RING(); + } + } + + /* XXX breadcrumb */ + return 0; +} + +/* Throttle our rendering by waiting until the ring has completed our requests + * emitted over 20 msec ago. + * + * This should get us reasonable parallelism between CPU and GPU but also + * relatively low latency when blocking on a particular request to finish. + */ +static int +i915_gem_ring_throttle(struct drm_device *dev, struct drm_file *file_priv) +{ + struct drm_i915_file_private *i915_file_priv = file_priv->driver_priv; + int ret = 0; + uint32_t seqno; + + mutex_lock(&dev->struct_mutex); + seqno = i915_file_priv->mm.last_gem_throttle_seqno; + i915_file_priv->mm.last_gem_throttle_seqno = + i915_file_priv->mm.last_gem_seqno; + if (seqno) + ret = i915_wait_request(dev, seqno); + mutex_unlock(&dev->struct_mutex); + return ret; +} + +int +i915_gem_execbuffer(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_file_private *i915_file_priv = file_priv->driver_priv; + struct drm_i915_gem_execbuffer *args = data; + struct drm_i915_gem_exec_object *exec_list = NULL; + struct drm_gem_object **object_list = NULL; + struct drm_gem_object *batch_obj; + int ret, i, pinned = 0; + uint64_t exec_offset; + uint32_t seqno, flush_domains; + +#if WATCH_EXEC + DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n", + (int) args->buffers_ptr, args->buffer_count, args->batch_len); +#endif + + if (args->buffer_count < 1) { + DRM_ERROR("execbuf with %d buffers\n", args->buffer_count); + return -EINVAL; + } + /* Copy in the exec list from userland */ + exec_list = drm_calloc(sizeof(*exec_list), args->buffer_count, + DRM_MEM_DRIVER); + object_list = drm_calloc(sizeof(*object_list), args->buffer_count, + DRM_MEM_DRIVER); + if (exec_list == NULL || object_list == NULL) { + DRM_ERROR("Failed to allocate exec or object list " + "for %d buffers\n", + args->buffer_count); + ret = -ENOMEM; + goto pre_mutex_err; + } + ret = copy_from_user(exec_list, + (struct drm_i915_relocation_entry __user *) + (uintptr_t) args->buffers_ptr, + sizeof(*exec_list) * args->buffer_count); + if (ret != 0) { + DRM_ERROR("copy %d exec entries failed %d\n", + args->buffer_count, ret); + goto pre_mutex_err; + } + + mutex_lock(&dev->struct_mutex); + + i915_verify_inactive(dev, __FILE__, __LINE__); + + if (dev_priv->mm.wedged) { + DRM_ERROR("Execbuf while wedged\n"); + mutex_unlock(&dev->struct_mutex); + return -EIO; + } + + if (dev_priv->mm.suspended) { + DRM_ERROR("Execbuf while VT-switched.\n"); + mutex_unlock(&dev->struct_mutex); + return -EBUSY; + } + + /* Zero the gloabl flush/invalidate flags. These + * will be modified as each object is bound to the + * gtt + */ + dev->invalidate_domains = 0; + dev->flush_domains = 0; + + /* Look up object handles and perform the relocations */ + for (i = 0; i < args->buffer_count; i++) { + object_list[i] = drm_gem_object_lookup(dev, file_priv, + exec_list[i].handle); + if (object_list[i] == NULL) { + DRM_ERROR("Invalid object handle %d at index %d\n", + exec_list[i].handle, i); + ret = -EBADF; + goto err; + } + + object_list[i]->pending_read_domains = 0; + object_list[i]->pending_write_domain = 0; + ret = i915_gem_object_pin_and_relocate(object_list[i], + file_priv, + &exec_list[i]); + if (ret) { + DRM_ERROR("object bind and relocate failed %d\n", ret); + goto err; + } + pinned = i + 1; + } + + /* Set the pending read domains for the batch buffer to COMMAND */ + batch_obj = object_list[args->buffer_count-1]; + batch_obj->pending_read_domains = I915_GEM_DOMAIN_COMMAND; + batch_obj->pending_write_domain = 0; + + i915_verify_inactive(dev, __FILE__, __LINE__); + + for (i = 0; i < args->buffer_count; i++) { + struct drm_gem_object *obj = object_list[i]; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + + if (obj_priv->gtt_space == NULL) { + /* We evicted the buffer in the process of validating + * our set of buffers in. We could try to recover by + * kicking them everything out and trying again from + * the start. + */ + ret = -ENOMEM; + goto err; + } + + /* make sure all previous memory operations have passed */ + ret = i915_gem_object_set_domain(obj, + obj->pending_read_domains, + obj->pending_write_domain); + if (ret) + goto err; + } + + i915_verify_inactive(dev, __FILE__, __LINE__); + + /* Flush/invalidate caches and chipset buffer */ + flush_domains = i915_gem_dev_set_domain(dev); + + i915_verify_inactive(dev, __FILE__, __LINE__); + +#if WATCH_COHERENCY + for (i = 0; i < args->buffer_count; i++) { + i915_gem_object_check_coherency(object_list[i], + exec_list[i].handle); + } +#endif + + exec_offset = exec_list[args->buffer_count - 1].offset; + +#if WATCH_EXEC + i915_gem_dump_object(object_list[args->buffer_count - 1], + args->batch_len, + __func__, + ~0); +#endif + + (void)i915_add_request(dev, flush_domains); + + /* Exec the batchbuffer */ + ret = i915_dispatch_gem_execbuffer(dev, args, exec_offset); + if (ret) { + DRM_ERROR("dispatch failed %d\n", ret); + goto err; + } + + /* + * Ensure that the commands in the batch buffer are + * finished before the interrupt fires + */ + flush_domains = i915_retire_commands(dev); + + i915_verify_inactive(dev, __FILE__, __LINE__); + + /* + * Get a seqno representing the execution of the current buffer, + * which we can wait on. We would like to mitigate these interrupts, + * likely by only creating seqnos occasionally (so that we have + * *some* interrupts representing completion of buffers that we can + * wait on when trying to clear up gtt space). + */ + seqno = i915_add_request(dev, flush_domains); + BUG_ON(seqno == 0); + i915_file_priv->mm.last_gem_seqno = seqno; + for (i = 0; i < args->buffer_count; i++) { + struct drm_gem_object *obj = object_list[i]; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + + i915_gem_object_move_to_active(obj); + obj_priv->last_rendering_seqno = seqno; +#if WATCH_LRU + DRM_INFO("%s: move to exec list %p\n", __func__, obj); +#endif + } +#if WATCH_LRU + i915_dump_lru(dev, __func__); +#endif + + i915_verify_inactive(dev, __FILE__, __LINE__); + + /* Copy the new buffer offsets back to the user's exec list. */ + ret = copy_to_user((struct drm_i915_relocation_entry __user *) + (uintptr_t) args->buffers_ptr, + exec_list, + sizeof(*exec_list) * args->buffer_count); + if (ret) + DRM_ERROR("failed to copy %d exec entries " + "back to user (%d)\n", + args->buffer_count, ret); +err: + if (object_list != NULL) { + for (i = 0; i < pinned; i++) + i915_gem_object_unpin(object_list[i]); + + for (i = 0; i < args->buffer_count; i++) + drm_gem_object_unreference(object_list[i]); + } + mutex_unlock(&dev->struct_mutex); + +pre_mutex_err: + drm_free(object_list, sizeof(*object_list) * args->buffer_count, + DRM_MEM_DRIVER); + drm_free(exec_list, sizeof(*exec_list) * args->buffer_count, + DRM_MEM_DRIVER); + + return ret; +} + +int +i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment) +{ + struct drm_device *dev = obj->dev; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + int ret; + + i915_verify_inactive(dev, __FILE__, __LINE__); + if (obj_priv->gtt_space == NULL) { + ret = i915_gem_object_bind_to_gtt(obj, alignment); + if (ret != 0) { + DRM_ERROR("Failure to bind: %d", ret); + return ret; + } + } + obj_priv->pin_count++; + + /* If the object is not active and not pending a flush, + * remove it from the inactive list + */ + if (obj_priv->pin_count == 1) { + atomic_inc(&dev->pin_count); + atomic_add(obj->size, &dev->pin_memory); + if (!obj_priv->active && + (obj->write_domain & ~(I915_GEM_DOMAIN_CPU | + I915_GEM_DOMAIN_GTT)) == 0 && + !list_empty(&obj_priv->list)) + list_del_init(&obj_priv->list); + } + i915_verify_inactive(dev, __FILE__, __LINE__); + + return 0; +} + +void +i915_gem_object_unpin(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + + i915_verify_inactive(dev, __FILE__, __LINE__); + obj_priv->pin_count--; + BUG_ON(obj_priv->pin_count < 0); + BUG_ON(obj_priv->gtt_space == NULL); + + /* If the object is no longer pinned, and is + * neither active nor being flushed, then stick it on + * the inactive list + */ + if (obj_priv->pin_count == 0) { + if (!obj_priv->active && + (obj->write_domain & ~(I915_GEM_DOMAIN_CPU | + I915_GEM_DOMAIN_GTT)) == 0) + list_move_tail(&obj_priv->list, + &dev_priv->mm.inactive_list); + atomic_dec(&dev->pin_count); + atomic_sub(obj->size, &dev->pin_memory); + } + i915_verify_inactive(dev, __FILE__, __LINE__); +} + +int +i915_gem_pin_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_i915_gem_pin *args = data; + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + int ret; + + mutex_lock(&dev->struct_mutex); + + obj = drm_gem_object_lookup(dev, file_priv, args->handle); + if (obj == NULL) { + DRM_ERROR("Bad handle in i915_gem_pin_ioctl(): %d\n", + args->handle); + mutex_unlock(&dev->struct_mutex); + return -EBADF; + } + obj_priv = obj->driver_private; + + ret = i915_gem_object_pin(obj, args->alignment); + if (ret != 0) { + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + return ret; + } + + /* XXX - flush the CPU caches for pinned objects + * as the X server doesn't manage domains yet + */ + if (obj->write_domain & I915_GEM_DOMAIN_CPU) { + i915_gem_clflush_object(obj); + drm_agp_chipset_flush(dev); + obj->write_domain = 0; + } + args->offset = obj_priv->gtt_offset; + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + + return 0; +} + +int +i915_gem_unpin_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_i915_gem_pin *args = data; + struct drm_gem_object *obj; + + mutex_lock(&dev->struct_mutex); + + obj = drm_gem_object_lookup(dev, file_priv, args->handle); + if (obj == NULL) { + DRM_ERROR("Bad handle in i915_gem_unpin_ioctl(): %d\n", + args->handle); + mutex_unlock(&dev->struct_mutex); + return -EBADF; + } + + i915_gem_object_unpin(obj); + + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + return 0; +} + +int +i915_gem_busy_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_i915_gem_busy *args = data; + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + + mutex_lock(&dev->struct_mutex); + obj = drm_gem_object_lookup(dev, file_priv, args->handle); + if (obj == NULL) { + DRM_ERROR("Bad handle in i915_gem_busy_ioctl(): %d\n", + args->handle); + mutex_unlock(&dev->struct_mutex); + return -EBADF; + } + + obj_priv = obj->driver_private; + args->busy = obj_priv->active; + + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + return 0; +} + +int +i915_gem_throttle_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + return i915_gem_ring_throttle(dev, file_priv); +} + +int i915_gem_init_object(struct drm_gem_object *obj) +{ + struct drm_i915_gem_object *obj_priv; + + obj_priv = drm_calloc(1, sizeof(*obj_priv), DRM_MEM_DRIVER); + if (obj_priv == NULL) + return -ENOMEM; + + /* + * We've just allocated pages from the kernel, + * so they've just been written by the CPU with + * zeros. They'll need to be clflushed before we + * use them with the GPU. + */ + obj->write_domain = I915_GEM_DOMAIN_CPU; + obj->read_domains = I915_GEM_DOMAIN_CPU; + + obj_priv->agp_type = AGP_USER_MEMORY; + + obj->driver_private = obj_priv; + obj_priv->obj = obj; + INIT_LIST_HEAD(&obj_priv->list); + return 0; +} + +void i915_gem_free_object(struct drm_gem_object *obj) +{ + struct drm_i915_gem_object *obj_priv = obj->driver_private; + + while (obj_priv->pin_count > 0) + i915_gem_object_unpin(obj); + + i915_gem_object_unbind(obj); + + drm_free(obj_priv->page_cpu_valid, 1, DRM_MEM_DRIVER); + drm_free(obj->driver_private, 1, DRM_MEM_DRIVER); +} + +static int +i915_gem_set_domain(struct drm_gem_object *obj, + struct drm_file *file_priv, + uint32_t read_domains, + uint32_t write_domain) +{ + struct drm_device *dev = obj->dev; + int ret; + uint32_t flush_domains; + + BUG_ON(!mutex_is_locked(&dev->struct_mutex)); + + ret = i915_gem_object_set_domain(obj, read_domains, write_domain); + if (ret) + return ret; + flush_domains = i915_gem_dev_set_domain(obj->dev); + + if (flush_domains & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)) + (void) i915_add_request(dev, flush_domains); + + return 0; +} + +/** Unbinds all objects that are on the given buffer list. */ +static int +i915_gem_evict_from_list(struct drm_device *dev, struct list_head *head) +{ + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + int ret; + + while (!list_empty(head)) { + obj_priv = list_first_entry(head, + struct drm_i915_gem_object, + list); + obj = obj_priv->obj; + + if (obj_priv->pin_count != 0) { + DRM_ERROR("Pinned object in unbind list\n"); + mutex_unlock(&dev->struct_mutex); + return -EINVAL; + } + + ret = i915_gem_object_unbind(obj); + if (ret != 0) { + DRM_ERROR("Error unbinding object in LeaveVT: %d\n", + ret); + mutex_unlock(&dev->struct_mutex); + return ret; + } + } + + + return 0; +} + +static int +i915_gem_idle(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + uint32_t seqno, cur_seqno, last_seqno; + int stuck, ret; + + mutex_lock(&dev->struct_mutex); + + if (dev_priv->mm.suspended || dev_priv->ring.ring_obj == NULL) { + mutex_unlock(&dev->struct_mutex); + return 0; + } + + /* Hack! Don't let anybody do execbuf while we don't control the chip. + * We need to replace this with a semaphore, or something. + */ + dev_priv->mm.suspended = 1; + + /* Cancel the retire work handler, wait for it to finish if running + */ + mutex_unlock(&dev->struct_mutex); + cancel_delayed_work_sync(&dev_priv->mm.retire_work); + mutex_lock(&dev->struct_mutex); + + i915_kernel_lost_context(dev); + + /* Flush the GPU along with all non-CPU write domains + */ + i915_gem_flush(dev, ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT), + ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)); + seqno = i915_add_request(dev, ~(I915_GEM_DOMAIN_CPU | + I915_GEM_DOMAIN_GTT)); + + if (seqno == 0) { + mutex_unlock(&dev->struct_mutex); + return -ENOMEM; + } + + dev_priv->mm.waiting_gem_seqno = seqno; + last_seqno = 0; + stuck = 0; + for (;;) { + cur_seqno = i915_get_gem_seqno(dev); + if (i915_seqno_passed(cur_seqno, seqno)) + break; + if (last_seqno == cur_seqno) { + if (stuck++ > 100) { + DRM_ERROR("hardware wedged\n"); + dev_priv->mm.wedged = 1; + DRM_WAKEUP(&dev_priv->irq_queue); + break; + } + } + msleep(10); + last_seqno = cur_seqno; + } + dev_priv->mm.waiting_gem_seqno = 0; + + i915_gem_retire_requests(dev); + + /* Active and flushing should now be empty as we've + * waited for a sequence higher than any pending execbuffer + */ + BUG_ON(!list_empty(&dev_priv->mm.active_list)); + BUG_ON(!list_empty(&dev_priv->mm.flushing_list)); + + /* Request should now be empty as we've also waited + * for the last request in the list + */ + BUG_ON(!list_empty(&dev_priv->mm.request_list)); + + /* Move all buffers out of the GTT. */ + ret = i915_gem_evict_from_list(dev, &dev_priv->mm.inactive_list); + if (ret) { + mutex_unlock(&dev->struct_mutex); + return ret; + } + + BUG_ON(!list_empty(&dev_priv->mm.active_list)); + BUG_ON(!list_empty(&dev_priv->mm.flushing_list)); + BUG_ON(!list_empty(&dev_priv->mm.inactive_list)); + BUG_ON(!list_empty(&dev_priv->mm.request_list)); + + i915_gem_cleanup_ringbuffer(dev); + mutex_unlock(&dev->struct_mutex); + + return 0; +} + +static int +i915_gem_init_hws(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + int ret; + + /* If we need a physical address for the status page, it's already + * initialized at driver load time. + */ + if (!I915_NEED_GFX_HWS(dev)) + return 0; + + obj = drm_gem_object_alloc(dev, 4096); + if (obj == NULL) { + DRM_ERROR("Failed to allocate status page\n"); + return -ENOMEM; + } + obj_priv = obj->driver_private; + obj_priv->agp_type = AGP_USER_CACHED_MEMORY; + + ret = i915_gem_object_pin(obj, 4096); + if (ret != 0) { + drm_gem_object_unreference(obj); + return ret; + } + + dev_priv->status_gfx_addr = obj_priv->gtt_offset; + + dev_priv->hw_status_page = kmap(obj_priv->page_list[0]); + if (dev_priv->hw_status_page == NULL) { + DRM_ERROR("Failed to map status page.\n"); + memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map)); + drm_gem_object_unreference(obj); + return -EINVAL; + } + dev_priv->hws_obj = obj; + memset(dev_priv->hw_status_page, 0, PAGE_SIZE); + I915_WRITE(HWS_PGA, dev_priv->status_gfx_addr); + I915_READ(HWS_PGA); /* posting read */ + DRM_DEBUG("hws offset: 0x%08x\n", dev_priv->status_gfx_addr); + + return 0; +} + +static int +i915_gem_init_ringbuffer(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + int ret; + u32 head; + + ret = i915_gem_init_hws(dev); + if (ret != 0) + return ret; + + obj = drm_gem_object_alloc(dev, 128 * 1024); + if (obj == NULL) { + DRM_ERROR("Failed to allocate ringbuffer\n"); + return -ENOMEM; + } + obj_priv = obj->driver_private; + + ret = i915_gem_object_pin(obj, 4096); + if (ret != 0) { + drm_gem_object_unreference(obj); + return ret; + } + + /* Set up the kernel mapping for the ring. */ + dev_priv->ring.Size = obj->size; + dev_priv->ring.tail_mask = obj->size - 1; + + dev_priv->ring.map.offset = dev->agp->base + obj_priv->gtt_offset; + dev_priv->ring.map.size = obj->size; + dev_priv->ring.map.type = 0; + dev_priv->ring.map.flags = 0; + dev_priv->ring.map.mtrr = 0; + + drm_core_ioremap_wc(&dev_priv->ring.map, dev); + if (dev_priv->ring.map.handle == NULL) { + DRM_ERROR("Failed to map ringbuffer.\n"); + memset(&dev_priv->ring, 0, sizeof(dev_priv->ring)); + drm_gem_object_unreference(obj); + return -EINVAL; + } + dev_priv->ring.ring_obj = obj; + dev_priv->ring.virtual_start = dev_priv->ring.map.handle; + + /* Stop the ring if it's running. */ + I915_WRITE(PRB0_CTL, 0); + I915_WRITE(PRB0_TAIL, 0); + I915_WRITE(PRB0_HEAD, 0); + + /* Initialize the ring. */ + I915_WRITE(PRB0_START, obj_priv->gtt_offset); + head = I915_READ(PRB0_HEAD) & HEAD_ADDR; + + /* G45 ring initialization fails to reset head to zero */ + if (head != 0) { + DRM_ERROR("Ring head not reset to zero " + "ctl %08x head %08x tail %08x start %08x\n", + I915_READ(PRB0_CTL), + I915_READ(PRB0_HEAD), + I915_READ(PRB0_TAIL), + I915_READ(PRB0_START)); + I915_WRITE(PRB0_HEAD, 0); + + DRM_ERROR("Ring head forced to zero " + "ctl %08x head %08x tail %08x start %08x\n", + I915_READ(PRB0_CTL), + I915_READ(PRB0_HEAD), + I915_READ(PRB0_TAIL), + I915_READ(PRB0_START)); + } + + I915_WRITE(PRB0_CTL, + ((obj->size - 4096) & RING_NR_PAGES) | + RING_NO_REPORT | + RING_VALID); + + head = I915_READ(PRB0_HEAD) & HEAD_ADDR; + + /* If the head is still not zero, the ring is dead */ + if (head != 0) { + DRM_ERROR("Ring initialization failed " + "ctl %08x head %08x tail %08x start %08x\n", + I915_READ(PRB0_CTL), + I915_READ(PRB0_HEAD), + I915_READ(PRB0_TAIL), + I915_READ(PRB0_START)); + return -EIO; + } + + /* Update our cache of the ring state */ + i915_kernel_lost_context(dev); + + return 0; +} + +static void +i915_gem_cleanup_ringbuffer(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + + if (dev_priv->ring.ring_obj == NULL) + return; + + drm_core_ioremapfree(&dev_priv->ring.map, dev); + + i915_gem_object_unpin(dev_priv->ring.ring_obj); + drm_gem_object_unreference(dev_priv->ring.ring_obj); + dev_priv->ring.ring_obj = NULL; + memset(&dev_priv->ring, 0, sizeof(dev_priv->ring)); + + if (dev_priv->hws_obj != NULL) { + struct drm_gem_object *obj = dev_priv->hws_obj; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + + kunmap(obj_priv->page_list[0]); + i915_gem_object_unpin(obj); + drm_gem_object_unreference(obj); + dev_priv->hws_obj = NULL; + memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map)); + dev_priv->hw_status_page = NULL; + + /* Write high address into HWS_PGA when disabling. */ + I915_WRITE(HWS_PGA, 0x1ffff000); + } +} + +int +i915_gem_entervt_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + int ret; + + if (dev_priv->mm.wedged) { + DRM_ERROR("Reenabling wedged hardware, good luck\n"); + dev_priv->mm.wedged = 0; + } + + ret = i915_gem_init_ringbuffer(dev); + if (ret != 0) + return ret; + + mutex_lock(&dev->struct_mutex); + BUG_ON(!list_empty(&dev_priv->mm.active_list)); + BUG_ON(!list_empty(&dev_priv->mm.flushing_list)); + BUG_ON(!list_empty(&dev_priv->mm.inactive_list)); + BUG_ON(!list_empty(&dev_priv->mm.request_list)); + dev_priv->mm.suspended = 0; + mutex_unlock(&dev->struct_mutex); + + drm_irq_install(dev); + + return 0; +} + +int +i915_gem_leavevt_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + int ret; + + ret = i915_gem_idle(dev); + drm_irq_uninstall(dev); + + return ret; +} + +void +i915_gem_lastclose(struct drm_device *dev) +{ + int ret; + + ret = i915_gem_idle(dev); + if (ret) + DRM_ERROR("failed to idle hardware: %d\n", ret); +} + +void +i915_gem_load(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + + INIT_LIST_HEAD(&dev_priv->mm.active_list); + INIT_LIST_HEAD(&dev_priv->mm.flushing_list); + INIT_LIST_HEAD(&dev_priv->mm.inactive_list); + INIT_LIST_HEAD(&dev_priv->mm.request_list); + INIT_DELAYED_WORK(&dev_priv->mm.retire_work, + i915_gem_retire_work_handler); + INIT_WORK(&dev_priv->mm.vblank_work, + i915_gem_vblank_work_handler); + dev_priv->mm.next_gem_seqno = 1; + + i915_gem_detect_bit_6_swizzle(dev); +} diff --git a/drivers/gpu/drm/i915/i915_gem_debug.c b/drivers/gpu/drm/i915/i915_gem_debug.c new file mode 100644 index 000000000000..131c088f8c8a --- /dev/null +++ b/drivers/gpu/drm/i915/i915_gem_debug.c @@ -0,0 +1,201 @@ +/* + * Copyright © 2008 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Keith Packard <keithp@keithp.com> + * + */ + +#include "drmP.h" +#include "drm.h" +#include "i915_drm.h" +#include "i915_drv.h" + +#if WATCH_INACTIVE +void +i915_verify_inactive(struct drm_device *dev, char *file, int line) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + + list_for_each_entry(obj_priv, &dev_priv->mm.inactive_list, list) { + obj = obj_priv->obj; + if (obj_priv->pin_count || obj_priv->active || + (obj->write_domain & ~(I915_GEM_DOMAIN_CPU | + I915_GEM_DOMAIN_GTT))) + DRM_ERROR("inactive %p (p %d a %d w %x) %s:%d\n", + obj, + obj_priv->pin_count, obj_priv->active, + obj->write_domain, file, line); + } +} +#endif /* WATCH_INACTIVE */ + + +#if WATCH_BUF | WATCH_EXEC | WATCH_PWRITE +static void +i915_gem_dump_page(struct page *page, uint32_t start, uint32_t end, + uint32_t bias, uint32_t mark) +{ + uint32_t *mem = kmap_atomic(page, KM_USER0); + int i; + for (i = start; i < end; i += 4) + DRM_INFO("%08x: %08x%s\n", + (int) (bias + i), mem[i / 4], + (bias + i == mark) ? " ********" : ""); + kunmap_atomic(mem, KM_USER0); + /* give syslog time to catch up */ + msleep(1); +} + +void +i915_gem_dump_object(struct drm_gem_object *obj, int len, + const char *where, uint32_t mark) +{ + struct drm_i915_gem_object *obj_priv = obj->driver_private; + int page; + + DRM_INFO("%s: object at offset %08x\n", where, obj_priv->gtt_offset); + for (page = 0; page < (len + PAGE_SIZE-1) / PAGE_SIZE; page++) { + int page_len, chunk, chunk_len; + + page_len = len - page * PAGE_SIZE; + if (page_len > PAGE_SIZE) + page_len = PAGE_SIZE; + + for (chunk = 0; chunk < page_len; chunk += 128) { + chunk_len = page_len - chunk; + if (chunk_len > 128) + chunk_len = 128; + i915_gem_dump_page(obj_priv->page_list[page], + chunk, chunk + chunk_len, + obj_priv->gtt_offset + + page * PAGE_SIZE, + mark); + } + } +} +#endif + +#if WATCH_LRU +void +i915_dump_lru(struct drm_device *dev, const char *where) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_gem_object *obj_priv; + + DRM_INFO("active list %s {\n", where); + list_for_each_entry(obj_priv, &dev_priv->mm.active_list, + list) + { + DRM_INFO(" %p: %08x\n", obj_priv, + obj_priv->last_rendering_seqno); + } + DRM_INFO("}\n"); + DRM_INFO("flushing list %s {\n", where); + list_for_each_entry(obj_priv, &dev_priv->mm.flushing_list, + list) + { + DRM_INFO(" %p: %08x\n", obj_priv, + obj_priv->last_rendering_seqno); + } + DRM_INFO("}\n"); + DRM_INFO("inactive %s {\n", where); + list_for_each_entry(obj_priv, &dev_priv->mm.inactive_list, list) { + DRM_INFO(" %p: %08x\n", obj_priv, + obj_priv->last_rendering_seqno); + } + DRM_INFO("}\n"); +} +#endif + + +#if WATCH_COHERENCY +void +i915_gem_object_check_coherency(struct drm_gem_object *obj, int handle) +{ + struct drm_device *dev = obj->dev; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + int page; + uint32_t *gtt_mapping; + uint32_t *backing_map = NULL; + int bad_count = 0; + + DRM_INFO("%s: checking coherency of object %p@0x%08x (%d, %dkb):\n", + __func__, obj, obj_priv->gtt_offset, handle, + obj->size / 1024); + + gtt_mapping = ioremap(dev->agp->base + obj_priv->gtt_offset, + obj->size); + if (gtt_mapping == NULL) { + DRM_ERROR("failed to map GTT space\n"); + return; + } + + for (page = 0; page < obj->size / PAGE_SIZE; page++) { + int i; + + backing_map = kmap_atomic(obj_priv->page_list[page], KM_USER0); + + if (backing_map == NULL) { + DRM_ERROR("failed to map backing page\n"); + goto out; + } + + for (i = 0; i < PAGE_SIZE / 4; i++) { + uint32_t cpuval = backing_map[i]; + uint32_t gttval = readl(gtt_mapping + + page * 1024 + i); + + if (cpuval != gttval) { + DRM_INFO("incoherent CPU vs GPU at 0x%08x: " + "0x%08x vs 0x%08x\n", + (int)(obj_priv->gtt_offset + + page * PAGE_SIZE + i * 4), + cpuval, gttval); + if (bad_count++ >= 8) { + DRM_INFO("...\n"); + goto out; + } + } + } + kunmap_atomic(backing_map, KM_USER0); + backing_map = NULL; + } + + out: + if (backing_map != NULL) + kunmap_atomic(backing_map, KM_USER0); + iounmap(gtt_mapping); + + /* give syslog time to catch up */ + msleep(1); + + /* Directly flush the object, since we just loaded values with the CPU + * from the backing pages and we don't want to disturb the cache + * management that we're trying to observe. + */ + + i915_gem_clflush_object(obj); +} +#endif diff --git a/drivers/gpu/drm/i915/i915_gem_proc.c b/drivers/gpu/drm/i915/i915_gem_proc.c new file mode 100644 index 000000000000..15d4160415b0 --- /dev/null +++ b/drivers/gpu/drm/i915/i915_gem_proc.c @@ -0,0 +1,292 @@ +/* + * Copyright © 2008 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * Keith Packard <keithp@keithp.com> + * + */ + +#include "drmP.h" +#include "drm.h" +#include "i915_drm.h" +#include "i915_drv.h" + +static int i915_gem_active_info(char *buf, char **start, off_t offset, + int request, int *eof, void *data) +{ + struct drm_minor *minor = (struct drm_minor *) data; + struct drm_device *dev = minor->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_gem_object *obj_priv; + int len = 0; + + if (offset > DRM_PROC_LIMIT) { + *eof = 1; + return 0; + } + + *start = &buf[offset]; + *eof = 0; + DRM_PROC_PRINT("Active:\n"); + list_for_each_entry(obj_priv, &dev_priv->mm.active_list, + list) + { + struct drm_gem_object *obj = obj_priv->obj; + if (obj->name) { + DRM_PROC_PRINT(" %p(%d): %08x %08x %d\n", + obj, obj->name, + obj->read_domains, obj->write_domain, + obj_priv->last_rendering_seqno); + } else { + DRM_PROC_PRINT(" %p: %08x %08x %d\n", + obj, + obj->read_domains, obj->write_domain, + obj_priv->last_rendering_seqno); + } + } + if (len > request + offset) + return request; + *eof = 1; + return len - offset; +} + +static int i915_gem_flushing_info(char *buf, char **start, off_t offset, + int request, int *eof, void *data) +{ + struct drm_minor *minor = (struct drm_minor *) data; + struct drm_device *dev = minor->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_gem_object *obj_priv; + int len = 0; + + if (offset > DRM_PROC_LIMIT) { + *eof = 1; + return 0; + } + + *start = &buf[offset]; + *eof = 0; + DRM_PROC_PRINT("Flushing:\n"); + list_for_each_entry(obj_priv, &dev_priv->mm.flushing_list, + list) + { + struct drm_gem_object *obj = obj_priv->obj; + if (obj->name) { + DRM_PROC_PRINT(" %p(%d): %08x %08x %d\n", + obj, obj->name, + obj->read_domains, obj->write_domain, + obj_priv->last_rendering_seqno); + } else { + DRM_PROC_PRINT(" %p: %08x %08x %d\n", obj, + obj->read_domains, obj->write_domain, + obj_priv->last_rendering_seqno); + } + } + if (len > request + offset) + return request; + *eof = 1; + return len - offset; +} + +static int i915_gem_inactive_info(char *buf, char **start, off_t offset, + int request, int *eof, void *data) +{ + struct drm_minor *minor = (struct drm_minor *) data; + struct drm_device *dev = minor->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_gem_object *obj_priv; + int len = 0; + + if (offset > DRM_PROC_LIMIT) { + *eof = 1; + return 0; + } + + *start = &buf[offset]; + *eof = 0; + DRM_PROC_PRINT("Inactive:\n"); + list_for_each_entry(obj_priv, &dev_priv->mm.inactive_list, + list) + { + struct drm_gem_object *obj = obj_priv->obj; + if (obj->name) { + DRM_PROC_PRINT(" %p(%d): %08x %08x %d\n", + obj, obj->name, + obj->read_domains, obj->write_domain, + obj_priv->last_rendering_seqno); + } else { + DRM_PROC_PRINT(" %p: %08x %08x %d\n", obj, + obj->read_domains, obj->write_domain, + obj_priv->last_rendering_seqno); + } + } + if (len > request + offset) + return request; + *eof = 1; + return len - offset; +} + +static int i915_gem_request_info(char *buf, char **start, off_t offset, + int request, int *eof, void *data) +{ + struct drm_minor *minor = (struct drm_minor *) data; + struct drm_device *dev = minor->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_gem_request *gem_request; + int len = 0; + + if (offset > DRM_PROC_LIMIT) { + *eof = 1; + return 0; + } + + *start = &buf[offset]; + *eof = 0; + DRM_PROC_PRINT("Request:\n"); + list_for_each_entry(gem_request, &dev_priv->mm.request_list, + list) + { + DRM_PROC_PRINT(" %d @ %d %08x\n", + gem_request->seqno, + (int) (jiffies - gem_request->emitted_jiffies), + gem_request->flush_domains); + } + if (len > request + offset) + return request; + *eof = 1; + return len - offset; +} + +static int i915_gem_seqno_info(char *buf, char **start, off_t offset, + int request, int *eof, void *data) +{ + struct drm_minor *minor = (struct drm_minor *) data; + struct drm_device *dev = minor->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + int len = 0; + + if (offset > DRM_PROC_LIMIT) { + *eof = 1; + return 0; + } + + *start = &buf[offset]; + *eof = 0; + DRM_PROC_PRINT("Current sequence: %d\n", i915_get_gem_seqno(dev)); + DRM_PROC_PRINT("Waiter sequence: %d\n", + dev_priv->mm.waiting_gem_seqno); + DRM_PROC_PRINT("IRQ sequence: %d\n", dev_priv->mm.irq_gem_seqno); + if (len > request + offset) + return request; + *eof = 1; + return len - offset; +} + + +static int i915_interrupt_info(char *buf, char **start, off_t offset, + int request, int *eof, void *data) +{ + struct drm_minor *minor = (struct drm_minor *) data; + struct drm_device *dev = minor->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + int len = 0; + + if (offset > DRM_PROC_LIMIT) { + *eof = 1; + return 0; + } + + *start = &buf[offset]; + *eof = 0; + DRM_PROC_PRINT("Interrupt enable: %08x\n", + I915_READ(IER)); + DRM_PROC_PRINT("Interrupt identity: %08x\n", + I915_READ(IIR)); + DRM_PROC_PRINT("Interrupt mask: %08x\n", + I915_READ(IMR)); + DRM_PROC_PRINT("Pipe A stat: %08x\n", + I915_READ(PIPEASTAT)); + DRM_PROC_PRINT("Pipe B stat: %08x\n", + I915_READ(PIPEBSTAT)); + DRM_PROC_PRINT("Interrupts received: %d\n", + atomic_read(&dev_priv->irq_received)); + DRM_PROC_PRINT("Current sequence: %d\n", + i915_get_gem_seqno(dev)); + DRM_PROC_PRINT("Waiter sequence: %d\n", + dev_priv->mm.waiting_gem_seqno); + DRM_PROC_PRINT("IRQ sequence: %d\n", + dev_priv->mm.irq_gem_seqno); + if (len > request + offset) + return request; + *eof = 1; + return len - offset; +} + +static struct drm_proc_list { + /** file name */ + const char *name; + /** proc callback*/ + int (*f) (char *, char **, off_t, int, int *, void *); +} i915_gem_proc_list[] = { + {"i915_gem_active", i915_gem_active_info}, + {"i915_gem_flushing", i915_gem_flushing_info}, + {"i915_gem_inactive", i915_gem_inactive_info}, + {"i915_gem_request", i915_gem_request_info}, + {"i915_gem_seqno", i915_gem_seqno_info}, + {"i915_gem_interrupt", i915_interrupt_info}, +}; + +#define I915_GEM_PROC_ENTRIES ARRAY_SIZE(i915_gem_proc_list) + +int i915_gem_proc_init(struct drm_minor *minor) +{ + struct proc_dir_entry *ent; + int i, j; + + for (i = 0; i < I915_GEM_PROC_ENTRIES; i++) { + ent = create_proc_entry(i915_gem_proc_list[i].name, + S_IFREG | S_IRUGO, minor->dev_root); + if (!ent) { + DRM_ERROR("Cannot create /proc/dri/.../%s\n", + i915_gem_proc_list[i].name); + for (j = 0; j < i; j++) + remove_proc_entry(i915_gem_proc_list[i].name, + minor->dev_root); + return -1; + } + ent->read_proc = i915_gem_proc_list[i].f; + ent->data = minor; + } + return 0; +} + +void i915_gem_proc_cleanup(struct drm_minor *minor) +{ + int i; + + if (!minor->dev_root) + return; + + for (i = 0; i < I915_GEM_PROC_ENTRIES; i++) + remove_proc_entry(i915_gem_proc_list[i].name, minor->dev_root); +} diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c new file mode 100644 index 000000000000..e8b85ac4ca04 --- /dev/null +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -0,0 +1,257 @@ +/* + * Copyright © 2008 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * + */ + +#include "drmP.h" +#include "drm.h" +#include "i915_drm.h" +#include "i915_drv.h" + +/** @file i915_gem_tiling.c + * + * Support for managing tiling state of buffer objects. + * + * The idea behind tiling is to increase cache hit rates by rearranging + * pixel data so that a group of pixel accesses are in the same cacheline. + * Performance improvement from doing this on the back/depth buffer are on + * the order of 30%. + * + * Intel architectures make this somewhat more complicated, though, by + * adjustments made to addressing of data when the memory is in interleaved + * mode (matched pairs of DIMMS) to improve memory bandwidth. + * For interleaved memory, the CPU sends every sequential 64 bytes + * to an alternate memory channel so it can get the bandwidth from both. + * + * The GPU also rearranges its accesses for increased bandwidth to interleaved + * memory, and it matches what the CPU does for non-tiled. However, when tiled + * it does it a little differently, since one walks addresses not just in the + * X direction but also Y. So, along with alternating channels when bit + * 6 of the address flips, it also alternates when other bits flip -- Bits 9 + * (every 512 bytes, an X tile scanline) and 10 (every two X tile scanlines) + * are common to both the 915 and 965-class hardware. + * + * The CPU also sometimes XORs in higher bits as well, to improve + * bandwidth doing strided access like we do so frequently in graphics. This + * is called "Channel XOR Randomization" in the MCH documentation. The result + * is that the CPU is XORing in either bit 11 or bit 17 to bit 6 of its address + * decode. + * + * All of this bit 6 XORing has an effect on our memory management, + * as we need to make sure that the 3d driver can correctly address object + * contents. + * + * If we don't have interleaved memory, all tiling is safe and no swizzling is + * required. + * + * When bit 17 is XORed in, we simply refuse to tile at all. Bit + * 17 is not just a page offset, so as we page an objet out and back in, + * individual pages in it will have different bit 17 addresses, resulting in + * each 64 bytes being swapped with its neighbor! + * + * Otherwise, if interleaved, we have to tell the 3d driver what the address + * swizzling it needs to do is, since it's writing with the CPU to the pages + * (bit 6 and potentially bit 11 XORed in), and the GPU is reading from the + * pages (bit 6, 9, and 10 XORed in), resulting in a cumulative bit swizzling + * required by the CPU of XORing in bit 6, 9, 10, and potentially 11, in order + * to match what the GPU expects. + */ + +/** + * Detects bit 6 swizzling of address lookup between IGD access and CPU + * access through main memory. + */ +void +i915_gem_detect_bit_6_swizzle(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + uint32_t swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN; + uint32_t swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN; + + if (!IS_I9XX(dev)) { + /* As far as we know, the 865 doesn't have these bit 6 + * swizzling issues. + */ + swizzle_x = I915_BIT_6_SWIZZLE_NONE; + swizzle_y = I915_BIT_6_SWIZZLE_NONE; + } else if ((!IS_I965G(dev) && !IS_G33(dev)) || IS_I965GM(dev) || + IS_GM45(dev)) { + uint32_t dcc; + + /* On 915-945 and GM965, channel interleave by the CPU is + * determined by DCC. The CPU will alternate based on bit 6 + * in interleaved mode, and the GPU will then also alternate + * on bit 6, 9, and 10 for X, but the CPU may also optionally + * alternate based on bit 17 (XOR not disabled and XOR + * bit == 17). + */ + dcc = I915_READ(DCC); + switch (dcc & DCC_ADDRESSING_MODE_MASK) { + case DCC_ADDRESSING_MODE_SINGLE_CHANNEL: + case DCC_ADDRESSING_MODE_DUAL_CHANNEL_ASYMMETRIC: + swizzle_x = I915_BIT_6_SWIZZLE_NONE; + swizzle_y = I915_BIT_6_SWIZZLE_NONE; + break; + case DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED: + if (IS_I915G(dev) || IS_I915GM(dev) || + dcc & DCC_CHANNEL_XOR_DISABLE) { + swizzle_x = I915_BIT_6_SWIZZLE_9_10; + swizzle_y = I915_BIT_6_SWIZZLE_9; + } else if (IS_I965GM(dev) || IS_GM45(dev)) { + /* GM965 only does bit 11-based channel + * randomization + */ + swizzle_x = I915_BIT_6_SWIZZLE_9_10_11; + swizzle_y = I915_BIT_6_SWIZZLE_9_11; + } else { + /* Bit 17 or perhaps other swizzling */ + swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN; + swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN; + } + break; + } + if (dcc == 0xffffffff) { + DRM_ERROR("Couldn't read from MCHBAR. " + "Disabling tiling.\n"); + swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN; + swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN; + } + } else { + /* The 965, G33, and newer, have a very flexible memory + * configuration. It will enable dual-channel mode + * (interleaving) on as much memory as it can, and the GPU + * will additionally sometimes enable different bit 6 + * swizzling for tiled objects from the CPU. + * + * Here's what I found on the G965: + * slot fill memory size swizzling + * 0A 0B 1A 1B 1-ch 2-ch + * 512 0 0 0 512 0 O + * 512 0 512 0 16 1008 X + * 512 0 0 512 16 1008 X + * 0 512 0 512 16 1008 X + * 1024 1024 1024 0 2048 1024 O + * + * We could probably detect this based on either the DRB + * matching, which was the case for the swizzling required in + * the table above, or from the 1-ch value being less than + * the minimum size of a rank. + */ + if (I915_READ16(C0DRB3) != I915_READ16(C1DRB3)) { + swizzle_x = I915_BIT_6_SWIZZLE_NONE; + swizzle_y = I915_BIT_6_SWIZZLE_NONE; + } else { + swizzle_x = I915_BIT_6_SWIZZLE_9_10; + swizzle_y = I915_BIT_6_SWIZZLE_9; + } + } + + dev_priv->mm.bit_6_swizzle_x = swizzle_x; + dev_priv->mm.bit_6_swizzle_y = swizzle_y; +} + +/** + * Sets the tiling mode of an object, returning the required swizzling of + * bit 6 of addresses in the object. + */ +int +i915_gem_set_tiling(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_i915_gem_set_tiling *args = data; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + + obj = drm_gem_object_lookup(dev, file_priv, args->handle); + if (obj == NULL) + return -EINVAL; + obj_priv = obj->driver_private; + + mutex_lock(&dev->struct_mutex); + + if (args->tiling_mode == I915_TILING_NONE) { + obj_priv->tiling_mode = I915_TILING_NONE; + args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE; + } else { + if (args->tiling_mode == I915_TILING_X) + args->swizzle_mode = dev_priv->mm.bit_6_swizzle_x; + else + args->swizzle_mode = dev_priv->mm.bit_6_swizzle_y; + /* If we can't handle the swizzling, make it untiled. */ + if (args->swizzle_mode == I915_BIT_6_SWIZZLE_UNKNOWN) { + args->tiling_mode = I915_TILING_NONE; + args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE; + } + } + obj_priv->tiling_mode = args->tiling_mode; + + mutex_unlock(&dev->struct_mutex); + + drm_gem_object_unreference(obj); + + return 0; +} + +/** + * Returns the current tiling mode and required bit 6 swizzling for the object. + */ +int +i915_gem_get_tiling(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_i915_gem_get_tiling *args = data; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_gem_object *obj; + struct drm_i915_gem_object *obj_priv; + + obj = drm_gem_object_lookup(dev, file_priv, args->handle); + if (obj == NULL) + return -EINVAL; + obj_priv = obj->driver_private; + + mutex_lock(&dev->struct_mutex); + + args->tiling_mode = obj_priv->tiling_mode; + switch (obj_priv->tiling_mode) { + case I915_TILING_X: + args->swizzle_mode = dev_priv->mm.bit_6_swizzle_x; + break; + case I915_TILING_Y: + args->swizzle_mode = dev_priv->mm.bit_6_swizzle_y; + break; + case I915_TILING_NONE: + args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE; + break; + default: + DRM_ERROR("unknown tiling mode\n"); + } + + mutex_unlock(&dev->struct_mutex); + + drm_gem_object_unreference(obj); + + return 0; +} diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index df036118b8b1..baae511c785b 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -31,12 +31,92 @@ #include "i915_drm.h" #include "i915_drv.h" -#define USER_INT_FLAG (1<<1) -#define VSYNC_PIPEB_FLAG (1<<5) -#define VSYNC_PIPEA_FLAG (1<<7) - #define MAX_NOPID ((u32)~0) +/** These are the interrupts used by the driver */ +#define I915_INTERRUPT_ENABLE_MASK (I915_USER_INTERRUPT | \ + I915_ASLE_INTERRUPT | \ + I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \ + I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) + +void +i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask) +{ + if ((dev_priv->irq_mask_reg & mask) != 0) { + dev_priv->irq_mask_reg &= ~mask; + I915_WRITE(IMR, dev_priv->irq_mask_reg); + (void) I915_READ(IMR); + } +} + +static inline void +i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask) +{ + if ((dev_priv->irq_mask_reg & mask) != mask) { + dev_priv->irq_mask_reg |= mask; + I915_WRITE(IMR, dev_priv->irq_mask_reg); + (void) I915_READ(IMR); + } +} + +/** + * i915_get_pipe - return the the pipe associated with a given plane + * @dev: DRM device + * @plane: plane to look for + * + * The Intel Mesa & 2D drivers call the vblank routines with a plane number + * rather than a pipe number, since they may not always be equal. This routine + * maps the given @plane back to a pipe number. + */ +static int +i915_get_pipe(struct drm_device *dev, int plane) +{ + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + u32 dspcntr; + + dspcntr = plane ? I915_READ(DSPBCNTR) : I915_READ(DSPACNTR); + + return dspcntr & DISPPLANE_SEL_PIPE_MASK ? 1 : 0; +} + +/** + * i915_get_plane - return the the plane associated with a given pipe + * @dev: DRM device + * @pipe: pipe to look for + * + * The Intel Mesa & 2D drivers call the vblank routines with a plane number + * rather than a plane number, since they may not always be equal. This routine + * maps the given @pipe back to a plane number. + */ +static int +i915_get_plane(struct drm_device *dev, int pipe) +{ + if (i915_get_pipe(dev, 0) == pipe) + return 0; + return 1; +} + +/** + * i915_pipe_enabled - check if a pipe is enabled + * @dev: DRM device + * @pipe: pipe to check + * + * Reading certain registers when the pipe is disabled can hang the chip. + * Use this routine to make sure the PLL is running and the pipe is active + * before reading such registers if unsure. + */ +static int +i915_pipe_enabled(struct drm_device *dev, int pipe) +{ + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + unsigned long pipeconf = pipe ? PIPEBCONF : PIPEACONF; + + if (I915_READ(pipeconf) & PIPEACONF_ENABLE) + return 1; + + return 0; +} + /** * Emit blits for scheduled buffer swaps. * @@ -48,8 +128,7 @@ static void i915_vblank_tasklet(struct drm_device *dev) unsigned long irqflags; struct list_head *list, *tmp, hits, *hit; int nhits, nrects, slice[2], upper[2], lower[2], i; - unsigned counter[2] = { atomic_read(&dev->vbl_received), - atomic_read(&dev->vbl_received2) }; + unsigned counter[2]; struct drm_drawable_info *drw; drm_i915_sarea_t *sarea_priv = dev_priv->sarea_priv; u32 cpp = dev_priv->cpp; @@ -71,6 +150,9 @@ static void i915_vblank_tasklet(struct drm_device *dev) src_pitch >>= 2; } + counter[0] = drm_vblank_count(dev, 0); + counter[1] = drm_vblank_count(dev, 1); + DRM_DEBUG("\n"); INIT_LIST_HEAD(&hits); @@ -83,12 +165,14 @@ static void i915_vblank_tasklet(struct drm_device *dev) list_for_each_safe(list, tmp, &dev_priv->vbl_swaps.head) { drm_i915_vbl_swap_t *vbl_swap = list_entry(list, drm_i915_vbl_swap_t, head); + int pipe = i915_get_pipe(dev, vbl_swap->plane); - if ((counter[vbl_swap->pipe] - vbl_swap->sequence) > (1<<23)) + if ((counter[pipe] - vbl_swap->sequence) > (1<<23)) continue; list_del(list); dev_priv->swaps_pending--; + drm_vblank_put(dev, pipe); spin_unlock(&dev_priv->swaps_lock); spin_lock(&dev->drw_lock); @@ -181,7 +265,7 @@ static void i915_vblank_tasklet(struct drm_device *dev) drm_i915_vbl_swap_t *swap_hit = list_entry(hit, drm_i915_vbl_swap_t, head); struct drm_clip_rect *rect; - int num_rects, pipe; + int num_rects, plane; unsigned short top, bottom; drw = drm_get_drawable_info(dev, swap_hit->drw_id); @@ -190,9 +274,9 @@ static void i915_vblank_tasklet(struct drm_device *dev) continue; rect = drw->rects; - pipe = swap_hit->pipe; - top = upper[pipe]; - bottom = lower[pipe]; + plane = swap_hit->plane; + top = upper[plane]; + bottom = lower[plane]; for (num_rects = drw->num_rects; num_rects--; rect++) { int y1 = max(rect->y1, top); @@ -229,61 +313,139 @@ static void i915_vblank_tasklet(struct drm_device *dev) } } +u32 i915_get_vblank_counter(struct drm_device *dev, int plane) +{ + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + unsigned long high_frame; + unsigned long low_frame; + u32 high1, high2, low, count; + int pipe; + + pipe = i915_get_pipe(dev, plane); + high_frame = pipe ? PIPEBFRAMEHIGH : PIPEAFRAMEHIGH; + low_frame = pipe ? PIPEBFRAMEPIXEL : PIPEAFRAMEPIXEL; + + if (!i915_pipe_enabled(dev, pipe)) { + DRM_ERROR("trying to get vblank count for disabled pipe %d\n", pipe); + return 0; + } + + /* + * High & low register fields aren't synchronized, so make sure + * we get a low value that's stable across two reads of the high + * register. + */ + do { + high1 = ((I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >> + PIPE_FRAME_HIGH_SHIFT); + low = ((I915_READ(low_frame) & PIPE_FRAME_LOW_MASK) >> + PIPE_FRAME_LOW_SHIFT); + high2 = ((I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >> + PIPE_FRAME_HIGH_SHIFT); + } while (high1 != high2); + + count = (high1 << 8) | low; + + return count; +} + +void +i915_gem_vblank_work_handler(struct work_struct *work) +{ + drm_i915_private_t *dev_priv; + struct drm_device *dev; + + dev_priv = container_of(work, drm_i915_private_t, + mm.vblank_work); + dev = dev_priv->dev; + + mutex_lock(&dev->struct_mutex); + i915_vblank_tasklet(dev); + mutex_unlock(&dev->struct_mutex); +} + irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - u16 temp; + u32 iir; u32 pipea_stats, pipeb_stats; + int vblank = 0; - pipea_stats = I915_READ(I915REG_PIPEASTAT); - pipeb_stats = I915_READ(I915REG_PIPEBSTAT); + atomic_inc(&dev_priv->irq_received); - temp = I915_READ16(I915REG_INT_IDENTITY_R); + if (dev->pdev->msi_enabled) + I915_WRITE(IMR, ~0); + iir = I915_READ(IIR); - temp &= (USER_INT_FLAG | VSYNC_PIPEA_FLAG | VSYNC_PIPEB_FLAG); + if (iir == 0) { + if (dev->pdev->msi_enabled) { + I915_WRITE(IMR, dev_priv->irq_mask_reg); + (void) I915_READ(IMR); + } + return IRQ_NONE; + } - DRM_DEBUG("%s flag=%08x\n", __FUNCTION__, temp); + /* + * Clear the PIPE(A|B)STAT regs before the IIR otherwise + * we may get extra interrupts. + */ + if (iir & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT) { + pipea_stats = I915_READ(PIPEASTAT); + if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_A)) + pipea_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE | + PIPE_VBLANK_INTERRUPT_ENABLE); + else if (pipea_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS| + PIPE_VBLANK_INTERRUPT_STATUS)) { + vblank++; + drm_handle_vblank(dev, i915_get_plane(dev, 0)); + } - if (temp == 0) - return IRQ_NONE; + I915_WRITE(PIPEASTAT, pipea_stats); + } + if (iir & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) { + pipeb_stats = I915_READ(PIPEBSTAT); + /* Ack the event */ + I915_WRITE(PIPEBSTAT, pipeb_stats); + + /* The vblank interrupt gets enabled even if we didn't ask for + it, so make sure it's shut down again */ + if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_B)) + pipeb_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE | + PIPE_VBLANK_INTERRUPT_ENABLE); + else if (pipeb_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS| + PIPE_VBLANK_INTERRUPT_STATUS)) { + vblank++; + drm_handle_vblank(dev, i915_get_plane(dev, 1)); + } - I915_WRITE16(I915REG_INT_IDENTITY_R, temp); - (void) I915_READ16(I915REG_INT_IDENTITY_R); - DRM_READMEMORYBARRIER(); + if (pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) + opregion_asle_intr(dev); + I915_WRITE(PIPEBSTAT, pipeb_stats); + } + + I915_WRITE(IIR, iir); + if (dev->pdev->msi_enabled) + I915_WRITE(IMR, dev_priv->irq_mask_reg); + (void) I915_READ(IIR); /* Flush posted writes */ - dev_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv); + if (dev_priv->sarea_priv) + dev_priv->sarea_priv->last_dispatch = + READ_BREADCRUMB(dev_priv); - if (temp & USER_INT_FLAG) + if (iir & I915_USER_INTERRUPT) { + dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev); DRM_WAKEUP(&dev_priv->irq_queue); + } - if (temp & (VSYNC_PIPEA_FLAG | VSYNC_PIPEB_FLAG)) { - int vblank_pipe = dev_priv->vblank_pipe; - - if ((vblank_pipe & - (DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B)) - == (DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B)) { - if (temp & VSYNC_PIPEA_FLAG) - atomic_inc(&dev->vbl_received); - if (temp & VSYNC_PIPEB_FLAG) - atomic_inc(&dev->vbl_received2); - } else if (((temp & VSYNC_PIPEA_FLAG) && - (vblank_pipe & DRM_I915_VBLANK_PIPE_A)) || - ((temp & VSYNC_PIPEB_FLAG) && - (vblank_pipe & DRM_I915_VBLANK_PIPE_B))) - atomic_inc(&dev->vbl_received); - - DRM_WAKEUP(&dev->vbl_queue); - drm_vbl_send_signals(dev); - - if (dev_priv->swaps_pending > 0) + if (iir & I915_ASLE_INTERRUPT) + opregion_asle_intr(dev); + + if (vblank && dev_priv->swaps_pending > 0) { + if (dev_priv->ring.ring_obj == NULL) drm_locked_tasklet(dev, i915_vblank_tasklet); - I915_WRITE(I915REG_PIPEASTAT, - pipea_stats|I915_VBLANK_INTERRUPT_ENABLE| - I915_VBLANK_CLEAR); - I915_WRITE(I915REG_PIPEBSTAT, - pipeb_stats|I915_VBLANK_INTERRUPT_ENABLE| - I915_VBLANK_CLEAR); + else + schedule_work(&dev_priv->mm.vblank_work); } return IRQ_HANDLED; @@ -298,23 +460,45 @@ static int i915_emit_irq(struct drm_device * dev) DRM_DEBUG("\n"); - dev_priv->sarea_priv->last_enqueue = ++dev_priv->counter; - + dev_priv->counter++; if (dev_priv->counter > 0x7FFFFFFFUL) - dev_priv->sarea_priv->last_enqueue = dev_priv->counter = 1; + dev_priv->counter = 1; + if (dev_priv->sarea_priv) + dev_priv->sarea_priv->last_enqueue = dev_priv->counter; BEGIN_LP_RING(6); - OUT_RING(CMD_STORE_DWORD_IDX); - OUT_RING(20); + OUT_RING(MI_STORE_DWORD_INDEX); + OUT_RING(5 << MI_STORE_DWORD_INDEX_SHIFT); OUT_RING(dev_priv->counter); OUT_RING(0); OUT_RING(0); - OUT_RING(GFX_OP_USER_INTERRUPT); + OUT_RING(MI_USER_INTERRUPT); ADVANCE_LP_RING(); return dev_priv->counter; } +void i915_user_irq_get(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + + spin_lock(&dev_priv->user_irq_lock); + if (dev->irq_enabled && (++dev_priv->user_irq_refcount == 1)) + i915_enable_irq(dev_priv, I915_USER_INTERRUPT); + spin_unlock(&dev_priv->user_irq_lock); +} + +void i915_user_irq_put(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + + spin_lock(&dev_priv->user_irq_lock); + BUG_ON(dev->irq_enabled && dev_priv->user_irq_refcount <= 0); + if (dev->irq_enabled && (--dev_priv->user_irq_refcount == 0)) + i915_disable_irq(dev_priv, I915_USER_INTERRUPT); + spin_unlock(&dev_priv->user_irq_lock); +} + static int i915_wait_irq(struct drm_device * dev, int irq_nr) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; @@ -323,55 +507,34 @@ static int i915_wait_irq(struct drm_device * dev, int irq_nr) DRM_DEBUG("irq_nr=%d breadcrumb=%d\n", irq_nr, READ_BREADCRUMB(dev_priv)); - if (READ_BREADCRUMB(dev_priv) >= irq_nr) + if (READ_BREADCRUMB(dev_priv) >= irq_nr) { + if (dev_priv->sarea_priv) { + dev_priv->sarea_priv->last_dispatch = + READ_BREADCRUMB(dev_priv); + } return 0; + } - dev_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT; + if (dev_priv->sarea_priv) + dev_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT; + i915_user_irq_get(dev); DRM_WAIT_ON(ret, dev_priv->irq_queue, 3 * DRM_HZ, READ_BREADCRUMB(dev_priv) >= irq_nr); + i915_user_irq_put(dev); if (ret == -EBUSY) { DRM_ERROR("EBUSY -- rec: %d emitted: %d\n", READ_BREADCRUMB(dev_priv), (int)dev_priv->counter); } - dev_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv); - return ret; -} - -static int i915_driver_vblank_do_wait(struct drm_device *dev, unsigned int *sequence, - atomic_t *counter) -{ - drm_i915_private_t *dev_priv = dev->dev_private; - unsigned int cur_vblank; - int ret = 0; - - if (!dev_priv) { - DRM_ERROR("called with no initialization\n"); - return -EINVAL; - } - - DRM_WAIT_ON(ret, dev->vbl_queue, 3 * DRM_HZ, - (((cur_vblank = atomic_read(counter)) - - *sequence) <= (1<<23))); - - *sequence = cur_vblank; + if (dev_priv->sarea_priv) + dev_priv->sarea_priv->last_dispatch = + READ_BREADCRUMB(dev_priv); return ret; } - -int i915_driver_vblank_wait(struct drm_device *dev, unsigned int *sequence) -{ - return i915_driver_vblank_do_wait(dev, sequence, &dev->vbl_received); -} - -int i915_driver_vblank_wait2(struct drm_device *dev, unsigned int *sequence) -{ - return i915_driver_vblank_do_wait(dev, sequence, &dev->vbl_received2); -} - /* Needs the lock as it touches the ring. */ int i915_irq_emit(struct drm_device *dev, void *data, @@ -381,14 +544,15 @@ int i915_irq_emit(struct drm_device *dev, void *data, drm_i915_irq_emit_t *emit = data; int result; - LOCK_TEST_WITH_RETURN(dev, file_priv); + RING_LOCK_TEST_WITH_RETURN(dev, file_priv); if (!dev_priv) { DRM_ERROR("called with no initialization\n"); return -EINVAL; } - + mutex_lock(&dev->struct_mutex); result = i915_emit_irq(dev); + mutex_unlock(&dev->struct_mutex); if (DRM_COPY_TO_USER(emit->irq_seq, &result, sizeof(int))) { DRM_ERROR("copy_to_user\n"); @@ -414,18 +578,74 @@ int i915_irq_wait(struct drm_device *dev, void *data, return i915_wait_irq(dev, irqwait->irq_seq); } -static void i915_enable_interrupt (struct drm_device *dev) +int i915_enable_vblank(struct drm_device *dev, int plane) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - u16 flag; + int pipe = i915_get_pipe(dev, plane); + u32 pipestat_reg = 0; + u32 pipestat; + + switch (pipe) { + case 0: + pipestat_reg = PIPEASTAT; + i915_enable_irq(dev_priv, I915_DISPLAY_PIPE_A_EVENT_INTERRUPT); + break; + case 1: + pipestat_reg = PIPEBSTAT; + i915_enable_irq(dev_priv, I915_DISPLAY_PIPE_B_EVENT_INTERRUPT); + break; + default: + DRM_ERROR("tried to enable vblank on non-existent pipe %d\n", + pipe); + break; + } + + if (pipestat_reg) { + pipestat = I915_READ(pipestat_reg); + if (IS_I965G(dev)) + pipestat |= PIPE_START_VBLANK_INTERRUPT_ENABLE; + else + pipestat |= PIPE_VBLANK_INTERRUPT_ENABLE; + /* Clear any stale interrupt status */ + pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS | + PIPE_VBLANK_INTERRUPT_STATUS); + I915_WRITE(pipestat_reg, pipestat); + } + + return 0; +} - flag = 0; - if (dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_A) - flag |= VSYNC_PIPEA_FLAG; - if (dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_B) - flag |= VSYNC_PIPEB_FLAG; +void i915_disable_vblank(struct drm_device *dev, int plane) +{ + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + int pipe = i915_get_pipe(dev, plane); + u32 pipestat_reg = 0; + u32 pipestat; + + switch (pipe) { + case 0: + pipestat_reg = PIPEASTAT; + i915_disable_irq(dev_priv, I915_DISPLAY_PIPE_A_EVENT_INTERRUPT); + break; + case 1: + pipestat_reg = PIPEBSTAT; + i915_disable_irq(dev_priv, I915_DISPLAY_PIPE_B_EVENT_INTERRUPT); + break; + default: + DRM_ERROR("tried to disable vblank on non-existent pipe %d\n", + pipe); + break; + } - I915_WRITE16(I915REG_INT_ENABLE_R, USER_INT_FLAG | flag); + if (pipestat_reg) { + pipestat = I915_READ(pipestat_reg); + pipestat &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE | + PIPE_VBLANK_INTERRUPT_ENABLE); + /* Clear any stale interrupt status */ + pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS | + PIPE_VBLANK_INTERRUPT_STATUS); + I915_WRITE(pipestat_reg, pipestat); + } } /* Set the vblank monitor pipe @@ -434,22 +654,12 @@ int i915_vblank_pipe_set(struct drm_device *dev, void *data, struct drm_file *file_priv) { drm_i915_private_t *dev_priv = dev->dev_private; - drm_i915_vblank_pipe_t *pipe = data; if (!dev_priv) { DRM_ERROR("called with no initialization\n"); return -EINVAL; } - if (pipe->pipe & ~(DRM_I915_VBLANK_PIPE_A|DRM_I915_VBLANK_PIPE_B)) { - DRM_ERROR("called with invalid pipe 0x%x\n", pipe->pipe); - return -EINVAL; - } - - dev_priv->vblank_pipe = pipe->pipe; - - i915_enable_interrupt (dev); - return 0; } @@ -458,19 +668,13 @@ int i915_vblank_pipe_get(struct drm_device *dev, void *data, { drm_i915_private_t *dev_priv = dev->dev_private; drm_i915_vblank_pipe_t *pipe = data; - u16 flag; if (!dev_priv) { DRM_ERROR("called with no initialization\n"); return -EINVAL; } - flag = I915_READ(I915REG_INT_ENABLE_R); - pipe->pipe = 0; - if (flag & VSYNC_PIPEA_FLAG) - pipe->pipe |= DRM_I915_VBLANK_PIPE_A; - if (flag & VSYNC_PIPEB_FLAG) - pipe->pipe |= DRM_I915_VBLANK_PIPE_B; + pipe->pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B; return 0; } @@ -484,11 +688,12 @@ int i915_vblank_swap(struct drm_device *dev, void *data, drm_i915_private_t *dev_priv = dev->dev_private; drm_i915_vblank_swap_t *swap = data; drm_i915_vbl_swap_t *vbl_swap; - unsigned int pipe, seqtype, curseq; + unsigned int pipe, seqtype, curseq, plane; unsigned long irqflags; struct list_head *list; + int ret; - if (!dev_priv) { + if (!dev_priv || !dev_priv->sarea_priv) { DRM_ERROR("%s called with no initialization\n", __func__); return -EINVAL; } @@ -504,7 +709,8 @@ int i915_vblank_swap(struct drm_device *dev, void *data, return -EINVAL; } - pipe = (swap->seqtype & _DRM_VBLANK_SECONDARY) ? 1 : 0; + plane = (swap->seqtype & _DRM_VBLANK_SECONDARY) ? 1 : 0; + pipe = i915_get_pipe(dev, plane); seqtype = swap->seqtype & (_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE); @@ -523,7 +729,14 @@ int i915_vblank_swap(struct drm_device *dev, void *data, spin_unlock_irqrestore(&dev->drw_lock, irqflags); - curseq = atomic_read(pipe ? &dev->vbl_received2 : &dev->vbl_received); + /* + * We take the ref here and put it when the swap actually completes + * in the tasklet. + */ + ret = drm_vblank_get(dev, pipe); + if (ret) + return ret; + curseq = drm_vblank_count(dev, pipe); if (seqtype == _DRM_VBLANK_RELATIVE) swap->sequence += curseq; @@ -533,6 +746,7 @@ int i915_vblank_swap(struct drm_device *dev, void *data, swap->sequence = curseq + 1; } else { DRM_DEBUG("Missed target sequence\n"); + drm_vblank_put(dev, pipe); return -EINVAL; } } @@ -543,7 +757,7 @@ int i915_vblank_swap(struct drm_device *dev, void *data, vbl_swap = list_entry(list, drm_i915_vbl_swap_t, head); if (vbl_swap->drw_id == swap->drawable && - vbl_swap->pipe == pipe && + vbl_swap->plane == plane && vbl_swap->sequence == swap->sequence) { spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); DRM_DEBUG("Already scheduled\n"); @@ -555,6 +769,7 @@ int i915_vblank_swap(struct drm_device *dev, void *data, if (dev_priv->swaps_pending >= 100) { DRM_DEBUG("Too many swaps queued\n"); + drm_vblank_put(dev, pipe); return -EBUSY; } @@ -562,13 +777,14 @@ int i915_vblank_swap(struct drm_device *dev, void *data, if (!vbl_swap) { DRM_ERROR("Failed to allocate memory to queue swap\n"); + drm_vblank_put(dev, pipe); return -ENOMEM; } DRM_DEBUG("\n"); vbl_swap->drw_id = swap->drawable; - vbl_swap->pipe = pipe; + vbl_swap->plane = plane; vbl_swap->sequence = swap->sequence; spin_lock_irqsave(&dev_priv->swaps_lock, irqflags); @@ -587,37 +803,63 @@ void i915_driver_irq_preinstall(struct drm_device * dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - I915_WRITE16(I915REG_HWSTAM, 0xfffe); - I915_WRITE16(I915REG_INT_MASK_R, 0x0); - I915_WRITE16(I915REG_INT_ENABLE_R, 0x0); + I915_WRITE(HWSTAM, 0xeffe); + I915_WRITE(IMR, 0xffffffff); + I915_WRITE(IER, 0x0); } -void i915_driver_irq_postinstall(struct drm_device * dev) +int i915_driver_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + int ret, num_pipes = 2; spin_lock_init(&dev_priv->swaps_lock); INIT_LIST_HEAD(&dev_priv->vbl_swaps.head); dev_priv->swaps_pending = 0; - if (!dev_priv->vblank_pipe) - dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A; - i915_enable_interrupt(dev); + /* Set initial unmasked IRQs to just the selected vblank pipes. */ + dev_priv->irq_mask_reg = ~0; + + ret = drm_vblank_init(dev, num_pipes); + if (ret) + return ret; + + dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B; + dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT; + dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT; + + dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ + + dev_priv->irq_mask_reg &= I915_INTERRUPT_ENABLE_MASK; + + I915_WRITE(IMR, dev_priv->irq_mask_reg); + I915_WRITE(IER, I915_INTERRUPT_ENABLE_MASK); + (void) I915_READ(IER); + + opregion_enable_asle(dev); DRM_INIT_WAITQUEUE(&dev_priv->irq_queue); + + return 0; } void i915_driver_irq_uninstall(struct drm_device * dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - u16 temp; + u32 temp; if (!dev_priv) return; - I915_WRITE16(I915REG_HWSTAM, 0xffff); - I915_WRITE16(I915REG_INT_MASK_R, 0xffff); - I915_WRITE16(I915REG_INT_ENABLE_R, 0x0); + dev_priv->vblank_pipe = 0; + + I915_WRITE(HWSTAM, 0xffffffff); + I915_WRITE(IMR, 0xffffffff); + I915_WRITE(IER, 0x0); - temp = I915_READ16(I915REG_INT_IDENTITY_R); - I915_WRITE16(I915REG_INT_IDENTITY_R, temp); + temp = I915_READ(PIPEASTAT); + I915_WRITE(PIPEASTAT, temp); + temp = I915_READ(PIPEBSTAT); + I915_WRITE(PIPEBSTAT, temp); + temp = I915_READ(IIR); + I915_WRITE(IIR, temp); } diff --git a/drivers/gpu/drm/i915/i915_opregion.c b/drivers/gpu/drm/i915/i915_opregion.c new file mode 100644 index 000000000000..1787a0c7e3ab --- /dev/null +++ b/drivers/gpu/drm/i915/i915_opregion.c @@ -0,0 +1,371 @@ +/* + * Copyright 2008 Intel Corporation <hong.liu@intel.com> + * Copyright 2008 Red Hat <mjg@redhat.com> + * + * Permission is hereby granted, free of charge, to any person obtaining + * a copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial + * portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NON-INFRINGEMENT. IN NO EVENT SHALL INTEL AND/OR ITS SUPPLIERS BE + * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#include <linux/acpi.h> + +#include "drmP.h" +#include "i915_drm.h" +#include "i915_drv.h" + +#define PCI_ASLE 0xe4 +#define PCI_LBPC 0xf4 +#define PCI_ASLS 0xfc + +#define OPREGION_SZ (8*1024) +#define OPREGION_HEADER_OFFSET 0 +#define OPREGION_ACPI_OFFSET 0x100 +#define OPREGION_SWSCI_OFFSET 0x200 +#define OPREGION_ASLE_OFFSET 0x300 +#define OPREGION_VBT_OFFSET 0x1000 + +#define OPREGION_SIGNATURE "IntelGraphicsMem" +#define MBOX_ACPI (1<<0) +#define MBOX_SWSCI (1<<1) +#define MBOX_ASLE (1<<2) + +struct opregion_header { + u8 signature[16]; + u32 size; + u32 opregion_ver; + u8 bios_ver[32]; + u8 vbios_ver[16]; + u8 driver_ver[16]; + u32 mboxes; + u8 reserved[164]; +} __attribute__((packed)); + +/* OpRegion mailbox #1: public ACPI methods */ +struct opregion_acpi { + u32 drdy; /* driver readiness */ + u32 csts; /* notification status */ + u32 cevt; /* current event */ + u8 rsvd1[20]; + u32 didl[8]; /* supported display devices ID list */ + u32 cpdl[8]; /* currently presented display list */ + u32 cadl[8]; /* currently active display list */ + u32 nadl[8]; /* next active devices list */ + u32 aslp; /* ASL sleep time-out */ + u32 tidx; /* toggle table index */ + u32 chpd; /* current hotplug enable indicator */ + u32 clid; /* current lid state*/ + u32 cdck; /* current docking state */ + u32 sxsw; /* Sx state resume */ + u32 evts; /* ASL supported events */ + u32 cnot; /* current OS notification */ + u32 nrdy; /* driver status */ + u8 rsvd2[60]; +} __attribute__((packed)); + +/* OpRegion mailbox #2: SWSCI */ +struct opregion_swsci { + u32 scic; /* SWSCI command|status|data */ + u32 parm; /* command parameters */ + u32 dslp; /* driver sleep time-out */ + u8 rsvd[244]; +} __attribute__((packed)); + +/* OpRegion mailbox #3: ASLE */ +struct opregion_asle { + u32 ardy; /* driver readiness */ + u32 aslc; /* ASLE interrupt command */ + u32 tche; /* technology enabled indicator */ + u32 alsi; /* current ALS illuminance reading */ + u32 bclp; /* backlight brightness to set */ + u32 pfit; /* panel fitting state */ + u32 cblv; /* current brightness level */ + u16 bclm[20]; /* backlight level duty cycle mapping table */ + u32 cpfm; /* current panel fitting mode */ + u32 epfm; /* enabled panel fitting modes */ + u8 plut[74]; /* panel LUT and identifier */ + u32 pfmb; /* PWM freq and min brightness */ + u8 rsvd[102]; +} __attribute__((packed)); + +/* ASLE irq request bits */ +#define ASLE_SET_ALS_ILLUM (1 << 0) +#define ASLE_SET_BACKLIGHT (1 << 1) +#define ASLE_SET_PFIT (1 << 2) +#define ASLE_SET_PWM_FREQ (1 << 3) +#define ASLE_REQ_MSK 0xf + +/* response bits of ASLE irq request */ +#define ASLE_ALS_ILLUM_FAIL (2<<10) +#define ASLE_BACKLIGHT_FAIL (2<<12) +#define ASLE_PFIT_FAIL (2<<14) +#define ASLE_PWM_FREQ_FAIL (2<<16) + +/* ASLE backlight brightness to set */ +#define ASLE_BCLP_VALID (1<<31) +#define ASLE_BCLP_MSK (~(1<<31)) + +/* ASLE panel fitting request */ +#define ASLE_PFIT_VALID (1<<31) +#define ASLE_PFIT_CENTER (1<<0) +#define ASLE_PFIT_STRETCH_TEXT (1<<1) +#define ASLE_PFIT_STRETCH_GFX (1<<2) + +/* PWM frequency and minimum brightness */ +#define ASLE_PFMB_BRIGHTNESS_MASK (0xff) +#define ASLE_PFMB_BRIGHTNESS_VALID (1<<8) +#define ASLE_PFMB_PWM_MASK (0x7ffffe00) +#define ASLE_PFMB_PWM_VALID (1<<31) + +#define ASLE_CBLV_VALID (1<<31) + +static u32 asle_set_backlight(struct drm_device *dev, u32 bclp) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct opregion_asle *asle = dev_priv->opregion.asle; + u32 blc_pwm_ctl, blc_pwm_ctl2; + + if (!(bclp & ASLE_BCLP_VALID)) + return ASLE_BACKLIGHT_FAIL; + + bclp &= ASLE_BCLP_MSK; + if (bclp < 0 || bclp > 255) + return ASLE_BACKLIGHT_FAIL; + + blc_pwm_ctl = I915_READ(BLC_PWM_CTL); + blc_pwm_ctl &= ~BACKLIGHT_DUTY_CYCLE_MASK; + blc_pwm_ctl2 = I915_READ(BLC_PWM_CTL2); + + if (blc_pwm_ctl2 & BLM_COMBINATION_MODE) + pci_write_config_dword(dev->pdev, PCI_LBPC, bclp); + else + I915_WRITE(BLC_PWM_CTL, blc_pwm_ctl | ((bclp * 0x101)-1)); + + asle->cblv = (bclp*0x64)/0xff | ASLE_CBLV_VALID; + + return 0; +} + +static u32 asle_set_als_illum(struct drm_device *dev, u32 alsi) +{ + /* alsi is the current ALS reading in lux. 0 indicates below sensor + range, 0xffff indicates above sensor range. 1-0xfffe are valid */ + return 0; +} + +static u32 asle_set_pwm_freq(struct drm_device *dev, u32 pfmb) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + if (pfmb & ASLE_PFMB_PWM_VALID) { + u32 blc_pwm_ctl = I915_READ(BLC_PWM_CTL); + u32 pwm = pfmb & ASLE_PFMB_PWM_MASK; + blc_pwm_ctl &= BACKLIGHT_DUTY_CYCLE_MASK; + pwm = pwm >> 9; + /* FIXME - what do we do with the PWM? */ + } + return 0; +} + +static u32 asle_set_pfit(struct drm_device *dev, u32 pfit) +{ + /* Panel fitting is currently controlled by the X code, so this is a + noop until modesetting support works fully */ + if (!(pfit & ASLE_PFIT_VALID)) + return ASLE_PFIT_FAIL; + return 0; +} + +void opregion_asle_intr(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct opregion_asle *asle = dev_priv->opregion.asle; + u32 asle_stat = 0; + u32 asle_req; + + if (!asle) + return; + + asle_req = asle->aslc & ASLE_REQ_MSK; + + if (!asle_req) { + DRM_DEBUG("non asle set request??\n"); + return; + } + + if (asle_req & ASLE_SET_ALS_ILLUM) + asle_stat |= asle_set_als_illum(dev, asle->alsi); + + if (asle_req & ASLE_SET_BACKLIGHT) + asle_stat |= asle_set_backlight(dev, asle->bclp); + + if (asle_req & ASLE_SET_PFIT) + asle_stat |= asle_set_pfit(dev, asle->pfit); + + if (asle_req & ASLE_SET_PWM_FREQ) + asle_stat |= asle_set_pwm_freq(dev, asle->pfmb); + + asle->aslc = asle_stat; +} + +#define ASLE_ALS_EN (1<<0) +#define ASLE_BLC_EN (1<<1) +#define ASLE_PFIT_EN (1<<2) +#define ASLE_PFMB_EN (1<<3) + +void opregion_enable_asle(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct opregion_asle *asle = dev_priv->opregion.asle; + + if (asle) { + u32 pipeb_stats = I915_READ(PIPEBSTAT); + if (IS_MOBILE(dev)) { + /* Many devices trigger events with a write to the + legacy backlight controller, so we need to ensure + that it's able to generate interrupts */ + I915_WRITE(PIPEBSTAT, pipeb_stats |= + I915_LEGACY_BLC_EVENT_ENABLE); + i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT | + I915_DISPLAY_PIPE_B_EVENT_INTERRUPT); + } else + i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT); + + asle->tche = ASLE_ALS_EN | ASLE_BLC_EN | ASLE_PFIT_EN | + ASLE_PFMB_EN; + asle->ardy = 1; + } +} + +#define ACPI_EV_DISPLAY_SWITCH (1<<0) +#define ACPI_EV_LID (1<<1) +#define ACPI_EV_DOCK (1<<2) + +static struct intel_opregion *system_opregion; + +int intel_opregion_video_event(struct notifier_block *nb, unsigned long val, + void *data) +{ + /* The only video events relevant to opregion are 0x80. These indicate + either a docking event, lid switch or display switch request. In + Linux, these are handled by the dock, button and video drivers. + We might want to fix the video driver to be opregion-aware in + future, but right now we just indicate to the firmware that the + request has been handled */ + + struct opregion_acpi *acpi; + + if (!system_opregion) + return NOTIFY_DONE; + + acpi = system_opregion->acpi; + acpi->csts = 0; + + return NOTIFY_OK; +} + +static struct notifier_block intel_opregion_notifier = { + .notifier_call = intel_opregion_video_event, +}; + +int intel_opregion_init(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_opregion *opregion = &dev_priv->opregion; + void *base; + u32 asls, mboxes; + int err = 0; + + pci_read_config_dword(dev->pdev, PCI_ASLS, &asls); + DRM_DEBUG("graphic opregion physical addr: 0x%x\n", asls); + if (asls == 0) { + DRM_DEBUG("ACPI OpRegion not supported!\n"); + return -ENOTSUPP; + } + + base = ioremap(asls, OPREGION_SZ); + if (!base) + return -ENOMEM; + + opregion->header = base; + if (memcmp(opregion->header->signature, OPREGION_SIGNATURE, 16)) { + DRM_DEBUG("opregion signature mismatch\n"); + err = -EINVAL; + goto err_out; + } + + mboxes = opregion->header->mboxes; + if (mboxes & MBOX_ACPI) { + DRM_DEBUG("Public ACPI methods supported\n"); + opregion->acpi = base + OPREGION_ACPI_OFFSET; + } else { + DRM_DEBUG("Public ACPI methods not supported\n"); + err = -ENOTSUPP; + goto err_out; + } + opregion->enabled = 1; + + if (mboxes & MBOX_SWSCI) { + DRM_DEBUG("SWSCI supported\n"); + opregion->swsci = base + OPREGION_SWSCI_OFFSET; + } + if (mboxes & MBOX_ASLE) { + DRM_DEBUG("ASLE supported\n"); + opregion->asle = base + OPREGION_ASLE_OFFSET; + } + + /* Notify BIOS we are ready to handle ACPI video ext notifs. + * Right now, all the events are handled by the ACPI video module. + * We don't actually need to do anything with them. */ + opregion->acpi->csts = 0; + opregion->acpi->drdy = 1; + + system_opregion = opregion; + register_acpi_notifier(&intel_opregion_notifier); + + return 0; + +err_out: + iounmap(opregion->header); + opregion->header = NULL; + return err; +} + +void intel_opregion_free(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_opregion *opregion = &dev_priv->opregion; + + if (!opregion->enabled) + return; + + opregion->acpi->drdy = 0; + + system_opregion = NULL; + unregister_acpi_notifier(&intel_opregion_notifier); + + /* just clear all opregion memory pointers now */ + iounmap(opregion->header); + opregion->header = NULL; + opregion->acpi = NULL; + opregion->swsci = NULL; + opregion->asle = NULL; + + opregion->enabled = 0; +} diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h new file mode 100644 index 000000000000..5c2d9f206d05 --- /dev/null +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -0,0 +1,1417 @@ +/* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS + * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. + * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR + * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _I915_REG_H_ +#define _I915_REG_H_ + +/* + * The Bridge device's PCI config space has information about the + * fb aperture size and the amount of pre-reserved memory. + */ +#define INTEL_GMCH_CTRL 0x52 +#define INTEL_GMCH_ENABLED 0x4 +#define INTEL_GMCH_MEM_MASK 0x1 +#define INTEL_GMCH_MEM_64M 0x1 +#define INTEL_GMCH_MEM_128M 0 + +#define INTEL_855_GMCH_GMS_MASK (0x7 << 4) +#define INTEL_855_GMCH_GMS_DISABLED (0x0 << 4) +#define INTEL_855_GMCH_GMS_STOLEN_1M (0x1 << 4) +#define INTEL_855_GMCH_GMS_STOLEN_4M (0x2 << 4) +#define INTEL_855_GMCH_GMS_STOLEN_8M (0x3 << 4) +#define INTEL_855_GMCH_GMS_STOLEN_16M (0x4 << 4) +#define INTEL_855_GMCH_GMS_STOLEN_32M (0x5 << 4) + +#define INTEL_915G_GMCH_GMS_STOLEN_48M (0x6 << 4) +#define INTEL_915G_GMCH_GMS_STOLEN_64M (0x7 << 4) + +/* PCI config space */ + +#define HPLLCC 0xc0 /* 855 only */ +#define GC_CLOCK_CONTROL_MASK (3 << 0) +#define GC_CLOCK_133_200 (0 << 0) +#define GC_CLOCK_100_200 (1 << 0) +#define GC_CLOCK_100_133 (2 << 0) +#define GC_CLOCK_166_250 (3 << 0) +#define GCFGC 0xf0 /* 915+ only */ +#define GC_LOW_FREQUENCY_ENABLE (1 << 7) +#define GC_DISPLAY_CLOCK_190_200_MHZ (0 << 4) +#define GC_DISPLAY_CLOCK_333_MHZ (4 << 4) +#define GC_DISPLAY_CLOCK_MASK (7 << 4) +#define LBB 0xf4 + +/* VGA stuff */ + +#define VGA_ST01_MDA 0x3ba +#define VGA_ST01_CGA 0x3da + +#define VGA_MSR_WRITE 0x3c2 +#define VGA_MSR_READ 0x3cc +#define VGA_MSR_MEM_EN (1<<1) +#define VGA_MSR_CGA_MODE (1<<0) + +#define VGA_SR_INDEX 0x3c4 +#define VGA_SR_DATA 0x3c5 + +#define VGA_AR_INDEX 0x3c0 +#define VGA_AR_VID_EN (1<<5) +#define VGA_AR_DATA_WRITE 0x3c0 +#define VGA_AR_DATA_READ 0x3c1 + +#define VGA_GR_INDEX 0x3ce +#define VGA_GR_DATA 0x3cf +/* GR05 */ +#define VGA_GR_MEM_READ_MODE_SHIFT 3 +#define VGA_GR_MEM_READ_MODE_PLANE 1 +/* GR06 */ +#define VGA_GR_MEM_MODE_MASK 0xc +#define VGA_GR_MEM_MODE_SHIFT 2 +#define VGA_GR_MEM_A0000_AFFFF 0 +#define VGA_GR_MEM_A0000_BFFFF 1 +#define VGA_GR_MEM_B0000_B7FFF 2 +#define VGA_GR_MEM_B0000_BFFFF 3 + +#define VGA_DACMASK 0x3c6 +#define VGA_DACRX 0x3c7 +#define VGA_DACWX 0x3c8 +#define VGA_DACDATA 0x3c9 + +#define VGA_CR_INDEX_MDA 0x3b4 +#define VGA_CR_DATA_MDA 0x3b5 +#define VGA_CR_INDEX_CGA 0x3d4 +#define VGA_CR_DATA_CGA 0x3d5 + +/* + * Memory interface instructions used by the kernel + */ +#define MI_INSTR(opcode, flags) (((opcode) << 23) | (flags)) + +#define MI_NOOP MI_INSTR(0, 0) +#define MI_USER_INTERRUPT MI_INSTR(0x02, 0) +#define MI_WAIT_FOR_EVENT MI_INSTR(0x03, 0) +#define MI_WAIT_FOR_PLANE_B_FLIP (1<<6) +#define MI_WAIT_FOR_PLANE_A_FLIP (1<<2) +#define MI_WAIT_FOR_PLANE_A_SCANLINES (1<<1) +#define MI_FLUSH MI_INSTR(0x04, 0) +#define MI_READ_FLUSH (1 << 0) +#define MI_EXE_FLUSH (1 << 1) +#define MI_NO_WRITE_FLUSH (1 << 2) +#define MI_SCENE_COUNT (1 << 3) /* just increment scene count */ +#define MI_END_SCENE (1 << 4) /* flush binner and incr scene count */ +#define MI_BATCH_BUFFER_END MI_INSTR(0x0a, 0) +#define MI_REPORT_HEAD MI_INSTR(0x07, 0) +#define MI_LOAD_SCAN_LINES_INCL MI_INSTR(0x12, 0) +#define MI_STORE_DWORD_IMM MI_INSTR(0x20, 1) +#define MI_MEM_VIRTUAL (1 << 22) /* 965+ only */ +#define MI_STORE_DWORD_INDEX MI_INSTR(0x21, 1) +#define MI_STORE_DWORD_INDEX_SHIFT 2 +#define MI_LOAD_REGISTER_IMM MI_INSTR(0x22, 1) +#define MI_BATCH_BUFFER MI_INSTR(0x30, 1) +#define MI_BATCH_NON_SECURE (1) +#define MI_BATCH_NON_SECURE_I965 (1<<8) +#define MI_BATCH_BUFFER_START MI_INSTR(0x31, 0) + +/* + * 3D instructions used by the kernel + */ +#define GFX_INSTR(opcode, flags) ((0x3 << 29) | ((opcode) << 24) | (flags)) + +#define GFX_OP_RASTER_RULES ((0x3<<29)|(0x7<<24)) +#define GFX_OP_SCISSOR ((0x3<<29)|(0x1c<<24)|(0x10<<19)) +#define SC_UPDATE_SCISSOR (0x1<<1) +#define SC_ENABLE_MASK (0x1<<0) +#define SC_ENABLE (0x1<<0) +#define GFX_OP_LOAD_INDIRECT ((0x3<<29)|(0x1d<<24)|(0x7<<16)) +#define GFX_OP_SCISSOR_INFO ((0x3<<29)|(0x1d<<24)|(0x81<<16)|(0x1)) +#define SCI_YMIN_MASK (0xffff<<16) +#define SCI_XMIN_MASK (0xffff<<0) +#define SCI_YMAX_MASK (0xffff<<16) +#define SCI_XMAX_MASK (0xffff<<0) +#define GFX_OP_SCISSOR_ENABLE ((0x3<<29)|(0x1c<<24)|(0x10<<19)) +#define GFX_OP_SCISSOR_RECT ((0x3<<29)|(0x1d<<24)|(0x81<<16)|1) +#define GFX_OP_COLOR_FACTOR ((0x3<<29)|(0x1d<<24)|(0x1<<16)|0x0) +#define GFX_OP_STIPPLE ((0x3<<29)|(0x1d<<24)|(0x83<<16)) +#define GFX_OP_MAP_INFO ((0x3<<29)|(0x1d<<24)|0x4) +#define GFX_OP_DESTBUFFER_VARS ((0x3<<29)|(0x1d<<24)|(0x85<<16)|0x0) +#define GFX_OP_DESTBUFFER_INFO ((0x3<<29)|(0x1d<<24)|(0x8e<<16)|1) +#define GFX_OP_DRAWRECT_INFO ((0x3<<29)|(0x1d<<24)|(0x80<<16)|(0x3)) +#define GFX_OP_DRAWRECT_INFO_I965 ((0x7900<<16)|0x2) +#define SRC_COPY_BLT_CMD ((2<<29)|(0x43<<22)|4) +#define XY_SRC_COPY_BLT_CMD ((2<<29)|(0x53<<22)|6) +#define XY_MONO_SRC_COPY_IMM_BLT ((2<<29)|(0x71<<22)|5) +#define XY_SRC_COPY_BLT_WRITE_ALPHA (1<<21) +#define XY_SRC_COPY_BLT_WRITE_RGB (1<<20) +#define BLT_DEPTH_8 (0<<24) +#define BLT_DEPTH_16_565 (1<<24) +#define BLT_DEPTH_16_1555 (2<<24) +#define BLT_DEPTH_32 (3<<24) +#define BLT_ROP_GXCOPY (0xcc<<16) +#define XY_SRC_COPY_BLT_SRC_TILED (1<<15) /* 965+ only */ +#define XY_SRC_COPY_BLT_DST_TILED (1<<11) /* 965+ only */ +#define CMD_OP_DISPLAYBUFFER_INFO ((0x0<<29)|(0x14<<23)|2) +#define ASYNC_FLIP (1<<22) +#define DISPLAY_PLANE_A (0<<20) +#define DISPLAY_PLANE_B (1<<20) + +/* + * Instruction and interrupt control regs + */ + +#define PRB0_TAIL 0x02030 +#define PRB0_HEAD 0x02034 +#define PRB0_START 0x02038 +#define PRB0_CTL 0x0203c +#define TAIL_ADDR 0x001FFFF8 +#define HEAD_WRAP_COUNT 0xFFE00000 +#define HEAD_WRAP_ONE 0x00200000 +#define HEAD_ADDR 0x001FFFFC +#define RING_NR_PAGES 0x001FF000 +#define RING_REPORT_MASK 0x00000006 +#define RING_REPORT_64K 0x00000002 +#define RING_REPORT_128K 0x00000004 +#define RING_NO_REPORT 0x00000000 +#define RING_VALID_MASK 0x00000001 +#define RING_VALID 0x00000001 +#define RING_INVALID 0x00000000 +#define PRB1_TAIL 0x02040 /* 915+ only */ +#define PRB1_HEAD 0x02044 /* 915+ only */ +#define PRB1_START 0x02048 /* 915+ only */ +#define PRB1_CTL 0x0204c /* 915+ only */ +#define ACTHD_I965 0x02074 +#define HWS_PGA 0x02080 +#define HWS_ADDRESS_MASK 0xfffff000 +#define HWS_START_ADDRESS_SHIFT 4 +#define IPEIR 0x02088 +#define NOPID 0x02094 +#define HWSTAM 0x02098 +#define SCPD0 0x0209c /* 915+ only */ +#define IER 0x020a0 +#define IIR 0x020a4 +#define IMR 0x020a8 +#define ISR 0x020ac +#define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18) +#define I915_DISPLAY_PORT_INTERRUPT (1<<17) +#define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15) +#define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14) +#define I915_HWB_OOM_INTERRUPT (1<<13) +#define I915_SYNC_STATUS_INTERRUPT (1<<12) +#define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT (1<<11) +#define I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT (1<<10) +#define I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT (1<<9) +#define I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT (1<<8) +#define I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT (1<<7) +#define I915_DISPLAY_PIPE_A_EVENT_INTERRUPT (1<<6) +#define I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT (1<<5) +#define I915_DISPLAY_PIPE_B_EVENT_INTERRUPT (1<<4) +#define I915_DEBUG_INTERRUPT (1<<2) +#define I915_USER_INTERRUPT (1<<1) +#define I915_ASLE_INTERRUPT (1<<0) +#define EIR 0x020b0 +#define EMR 0x020b4 +#define ESR 0x020b8 +#define INSTPM 0x020c0 +#define ACTHD 0x020c8 +#define FW_BLC 0x020d8 +#define FW_BLC_SELF 0x020e0 /* 915+ only */ +#define MI_ARB_STATE 0x020e4 /* 915+ only */ +#define CACHE_MODE_0 0x02120 /* 915+ only */ +#define CM0_MASK_SHIFT 16 +#define CM0_IZ_OPT_DISABLE (1<<6) +#define CM0_ZR_OPT_DISABLE (1<<5) +#define CM0_DEPTH_EVICT_DISABLE (1<<4) +#define CM0_COLOR_EVICT_DISABLE (1<<3) +#define CM0_DEPTH_WRITE_DISABLE (1<<1) +#define CM0_RC_OP_FLUSH_DISABLE (1<<0) +#define GFX_FLSH_CNTL 0x02170 /* 915+ only */ + +/* + * Framebuffer compression (915+ only) + */ + +#define FBC_CFB_BASE 0x03200 /* 4k page aligned */ +#define FBC_LL_BASE 0x03204 /* 4k page aligned */ +#define FBC_CONTROL 0x03208 +#define FBC_CTL_EN (1<<31) +#define FBC_CTL_PERIODIC (1<<30) +#define FBC_CTL_INTERVAL_SHIFT (16) +#define FBC_CTL_UNCOMPRESSIBLE (1<<14) +#define FBC_CTL_STRIDE_SHIFT (5) +#define FBC_CTL_FENCENO (1<<0) +#define FBC_COMMAND 0x0320c +#define FBC_CMD_COMPRESS (1<<0) +#define FBC_STATUS 0x03210 +#define FBC_STAT_COMPRESSING (1<<31) +#define FBC_STAT_COMPRESSED (1<<30) +#define FBC_STAT_MODIFIED (1<<29) +#define FBC_STAT_CURRENT_LINE (1<<0) +#define FBC_CONTROL2 0x03214 +#define FBC_CTL_FENCE_DBL (0<<4) +#define FBC_CTL_IDLE_IMM (0<<2) +#define FBC_CTL_IDLE_FULL (1<<2) +#define FBC_CTL_IDLE_LINE (2<<2) +#define FBC_CTL_IDLE_DEBUG (3<<2) +#define FBC_CTL_CPU_FENCE (1<<1) +#define FBC_CTL_PLANEA (0<<0) +#define FBC_CTL_PLANEB (1<<0) +#define FBC_FENCE_OFF 0x0321b + +#define FBC_LL_SIZE (1536) + +/* + * GPIO regs + */ +#define GPIOA 0x5010 +#define GPIOB 0x5014 +#define GPIOC 0x5018 +#define GPIOD 0x501c +#define GPIOE 0x5020 +#define GPIOF 0x5024 +#define GPIOG 0x5028 +#define GPIOH 0x502c +# define GPIO_CLOCK_DIR_MASK (1 << 0) +# define GPIO_CLOCK_DIR_IN (0 << 1) +# define GPIO_CLOCK_DIR_OUT (1 << 1) +# define GPIO_CLOCK_VAL_MASK (1 << 2) +# define GPIO_CLOCK_VAL_OUT (1 << 3) +# define GPIO_CLOCK_VAL_IN (1 << 4) +# define GPIO_CLOCK_PULLUP_DISABLE (1 << 5) +# define GPIO_DATA_DIR_MASK (1 << 8) +# define GPIO_DATA_DIR_IN (0 << 9) +# define GPIO_DATA_DIR_OUT (1 << 9) +# define GPIO_DATA_VAL_MASK (1 << 10) +# define GPIO_DATA_VAL_OUT (1 << 11) +# define GPIO_DATA_VAL_IN (1 << 12) +# define GPIO_DATA_PULLUP_DISABLE (1 << 13) + +/* + * Clock control & power management + */ + +#define VGA0 0x6000 +#define VGA1 0x6004 +#define VGA_PD 0x6010 +#define VGA0_PD_P2_DIV_4 (1 << 7) +#define VGA0_PD_P1_DIV_2 (1 << 5) +#define VGA0_PD_P1_SHIFT 0 +#define VGA0_PD_P1_MASK (0x1f << 0) +#define VGA1_PD_P2_DIV_4 (1 << 15) +#define VGA1_PD_P1_DIV_2 (1 << 13) +#define VGA1_PD_P1_SHIFT 8 +#define VGA1_PD_P1_MASK (0x1f << 8) +#define DPLL_A 0x06014 +#define DPLL_B 0x06018 +#define DPLL_VCO_ENABLE (1 << 31) +#define DPLL_DVO_HIGH_SPEED (1 << 30) +#define DPLL_SYNCLOCK_ENABLE (1 << 29) +#define DPLL_VGA_MODE_DIS (1 << 28) +#define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */ +#define DPLLB_MODE_LVDS (2 << 26) /* i915 */ +#define DPLL_MODE_MASK (3 << 26) +#define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */ +#define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */ +#define DPLLB_LVDS_P2_CLOCK_DIV_14 (0 << 24) /* i915 */ +#define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */ +#define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */ +#define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */ + +#define I915_FIFO_UNDERRUN_STATUS (1UL<<31) +#define I915_CRC_ERROR_ENABLE (1UL<<29) +#define I915_CRC_DONE_ENABLE (1UL<<28) +#define I915_GMBUS_EVENT_ENABLE (1UL<<27) +#define I915_VSYNC_INTERRUPT_ENABLE (1UL<<25) +#define I915_DISPLAY_LINE_COMPARE_ENABLE (1UL<<24) +#define I915_DPST_EVENT_ENABLE (1UL<<23) +#define I915_LEGACY_BLC_EVENT_ENABLE (1UL<<22) +#define I915_ODD_FIELD_INTERRUPT_ENABLE (1UL<<21) +#define I915_EVEN_FIELD_INTERRUPT_ENABLE (1UL<<20) +#define I915_START_VBLANK_INTERRUPT_ENABLE (1UL<<18) /* 965 or later */ +#define I915_VBLANK_INTERRUPT_ENABLE (1UL<<17) +#define I915_OVERLAY_UPDATED_ENABLE (1UL<<16) +#define I915_CRC_ERROR_INTERRUPT_STATUS (1UL<<13) +#define I915_CRC_DONE_INTERRUPT_STATUS (1UL<<12) +#define I915_GMBUS_INTERRUPT_STATUS (1UL<<11) +#define I915_VSYNC_INTERRUPT_STATUS (1UL<<9) +#define I915_DISPLAY_LINE_COMPARE_STATUS (1UL<<8) +#define I915_DPST_EVENT_STATUS (1UL<<7) +#define I915_LEGACY_BLC_EVENT_STATUS (1UL<<6) +#define I915_ODD_FIELD_INTERRUPT_STATUS (1UL<<5) +#define I915_EVEN_FIELD_INTERRUPT_STATUS (1UL<<4) +#define I915_START_VBLANK_INTERRUPT_STATUS (1UL<<2) /* 965 or later */ +#define I915_VBLANK_INTERRUPT_STATUS (1UL<<1) +#define I915_OVERLAY_UPDATED_STATUS (1UL<<0) + +#define SRX_INDEX 0x3c4 +#define SRX_DATA 0x3c5 +#define SR01 1 +#define SR01_SCREEN_OFF (1<<5) + +#define PPCR 0x61204 +#define PPCR_ON (1<<0) + +#define DVOB 0x61140 +#define DVOB_ON (1<<31) +#define DVOC 0x61160 +#define DVOC_ON (1<<31) +#define LVDS 0x61180 +#define LVDS_ON (1<<31) + +#define ADPA 0x61100 +#define ADPA_DPMS_MASK (~(3<<10)) +#define ADPA_DPMS_ON (0<<10) +#define ADPA_DPMS_SUSPEND (1<<10) +#define ADPA_DPMS_STANDBY (2<<10) +#define ADPA_DPMS_OFF (3<<10) + +#define RING_TAIL 0x00 +#define TAIL_ADDR 0x001FFFF8 +#define RING_HEAD 0x04 +#define HEAD_WRAP_COUNT 0xFFE00000 +#define HEAD_WRAP_ONE 0x00200000 +#define HEAD_ADDR 0x001FFFFC +#define RING_START 0x08 +#define START_ADDR 0xFFFFF000 +#define RING_LEN 0x0C +#define RING_NR_PAGES 0x001FF000 +#define RING_REPORT_MASK 0x00000006 +#define RING_REPORT_64K 0x00000002 +#define RING_REPORT_128K 0x00000004 +#define RING_NO_REPORT 0x00000000 +#define RING_VALID_MASK 0x00000001 +#define RING_VALID 0x00000001 +#define RING_INVALID 0x00000000 + +/* Scratch pad debug 0 reg: + */ +#define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000 +/* + * The i830 generation, in LVDS mode, defines P1 as the bit number set within + * this field (only one bit may be set). + */ +#define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000 +#define DPLL_FPA01_P1_POST_DIV_SHIFT 16 +/* i830, required in DVO non-gang */ +#define PLL_P2_DIVIDE_BY_4 (1 << 23) +#define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */ +#define PLL_REF_INPUT_DREFCLK (0 << 13) +#define PLL_REF_INPUT_TVCLKINA (1 << 13) /* i830 */ +#define PLL_REF_INPUT_TVCLKINBC (2 << 13) /* SDVO TVCLKIN */ +#define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13) +#define PLL_REF_INPUT_MASK (3 << 13) +#define PLL_LOAD_PULSE_PHASE_SHIFT 9 +/* + * Parallel to Serial Load Pulse phase selection. + * Selects the phase for the 10X DPLL clock for the PCIe + * digital display port. The range is 4 to 13; 10 or more + * is just a flip delay. The default is 6 + */ +#define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT) +#define DISPLAY_RATE_SELECT_FPA1 (1 << 8) +/* + * SDVO multiplier for 945G/GM. Not used on 965. + */ +#define SDVO_MULTIPLIER_MASK 0x000000ff +#define SDVO_MULTIPLIER_SHIFT_HIRES 4 +#define SDVO_MULTIPLIER_SHIFT_VGA 0 +#define DPLL_A_MD 0x0601c /* 965+ only */ +/* + * UDI pixel divider, controlling how many pixels are stuffed into a packet. + * + * Value is pixels minus 1. Must be set to 1 pixel for SDVO. + */ +#define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000 +#define DPLL_MD_UDI_DIVIDER_SHIFT 24 +/* UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */ +#define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000 +#define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16 +/* + * SDVO/UDI pixel multiplier. + * + * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus + * clock rate is 10 times the DPLL clock. At low resolution/refresh rate + * modes, the bus rate would be below the limits, so SDVO allows for stuffing + * dummy bytes in the datastream at an increased clock rate, with both sides of + * the link knowing how many bytes are fill. + * + * So, for a mode with a dotclock of 65Mhz, we would want to double the clock + * rate to 130Mhz to get a bus rate of 1.30Ghz. The DPLL clock rate would be + * set to 130Mhz, and the SDVO multiplier set to 2x in this register and + * through an SDVO command. + * + * This register field has values of multiplication factor minus 1, with + * a maximum multiplier of 5 for SDVO. + */ +#define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00 +#define DPLL_MD_UDI_MULTIPLIER_SHIFT 8 +/* + * SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK. + * This best be set to the default value (3) or the CRT won't work. No, + * I don't entirely understand what this does... + */ +#define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f +#define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0 +#define DPLL_B_MD 0x06020 /* 965+ only */ +#define FPA0 0x06040 +#define FPA1 0x06044 +#define FPB0 0x06048 +#define FPB1 0x0604c +#define FP_N_DIV_MASK 0x003f0000 +#define FP_N_DIV_SHIFT 16 +#define FP_M1_DIV_MASK 0x00003f00 +#define FP_M1_DIV_SHIFT 8 +#define FP_M2_DIV_MASK 0x0000003f +#define FP_M2_DIV_SHIFT 0 +#define DPLL_TEST 0x606c +#define DPLLB_TEST_SDVO_DIV_1 (0 << 22) +#define DPLLB_TEST_SDVO_DIV_2 (1 << 22) +#define DPLLB_TEST_SDVO_DIV_4 (2 << 22) +#define DPLLB_TEST_SDVO_DIV_MASK (3 << 22) +#define DPLLB_TEST_N_BYPASS (1 << 19) +#define DPLLB_TEST_M_BYPASS (1 << 18) +#define DPLLB_INPUT_BUFFER_ENABLE (1 << 16) +#define DPLLA_TEST_N_BYPASS (1 << 3) +#define DPLLA_TEST_M_BYPASS (1 << 2) +#define DPLLA_INPUT_BUFFER_ENABLE (1 << 0) +#define D_STATE 0x6104 +#define CG_2D_DIS 0x6200 +#define CG_3D_DIS 0x6204 + +/* + * Palette regs + */ + +#define PALETTE_A 0x0a000 +#define PALETTE_B 0x0a800 + +/* MCH MMIO space */ + +/* + * MCHBAR mirror. + * + * This mirrors the MCHBAR MMIO space whose location is determined by + * device 0 function 0's pci config register 0x44 or 0x48 and matches it in + * every way. It is not accessible from the CP register read instructions. + * + */ +#define MCHBAR_MIRROR_BASE 0x10000 + +/** 915-945 and GM965 MCH register controlling DRAM channel access */ +#define DCC 0x10200 +#define DCC_ADDRESSING_MODE_SINGLE_CHANNEL (0 << 0) +#define DCC_ADDRESSING_MODE_DUAL_CHANNEL_ASYMMETRIC (1 << 0) +#define DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED (2 << 0) +#define DCC_ADDRESSING_MODE_MASK (3 << 0) +#define DCC_CHANNEL_XOR_DISABLE (1 << 10) + +/** 965 MCH register controlling DRAM channel configuration */ +#define C0DRB3 0x10206 +#define C1DRB3 0x10606 + +/* + * Overlay regs + */ + +#define OVADD 0x30000 +#define DOVSTA 0x30008 +#define OC_BUF (0x3<<20) +#define OGAMC5 0x30010 +#define OGAMC4 0x30014 +#define OGAMC3 0x30018 +#define OGAMC2 0x3001c +#define OGAMC1 0x30020 +#define OGAMC0 0x30024 + +/* + * Display engine regs + */ + +/* Pipe A timing regs */ +#define HTOTAL_A 0x60000 +#define HBLANK_A 0x60004 +#define HSYNC_A 0x60008 +#define VTOTAL_A 0x6000c +#define VBLANK_A 0x60010 +#define VSYNC_A 0x60014 +#define PIPEASRC 0x6001c +#define BCLRPAT_A 0x60020 + +/* Pipe B timing regs */ +#define HTOTAL_B 0x61000 +#define HBLANK_B 0x61004 +#define HSYNC_B 0x61008 +#define VTOTAL_B 0x6100c +#define VBLANK_B 0x61010 +#define VSYNC_B 0x61014 +#define PIPEBSRC 0x6101c +#define BCLRPAT_B 0x61020 + +/* VGA port control */ +#define ADPA 0x61100 +#define ADPA_DAC_ENABLE (1<<31) +#define ADPA_DAC_DISABLE 0 +#define ADPA_PIPE_SELECT_MASK (1<<30) +#define ADPA_PIPE_A_SELECT 0 +#define ADPA_PIPE_B_SELECT (1<<30) +#define ADPA_USE_VGA_HVPOLARITY (1<<15) +#define ADPA_SETS_HVPOLARITY 0 +#define ADPA_VSYNC_CNTL_DISABLE (1<<11) +#define ADPA_VSYNC_CNTL_ENABLE 0 +#define ADPA_HSYNC_CNTL_DISABLE (1<<10) +#define ADPA_HSYNC_CNTL_ENABLE 0 +#define ADPA_VSYNC_ACTIVE_HIGH (1<<4) +#define ADPA_VSYNC_ACTIVE_LOW 0 +#define ADPA_HSYNC_ACTIVE_HIGH (1<<3) +#define ADPA_HSYNC_ACTIVE_LOW 0 +#define ADPA_DPMS_MASK (~(3<<10)) +#define ADPA_DPMS_ON (0<<10) +#define ADPA_DPMS_SUSPEND (1<<10) +#define ADPA_DPMS_STANDBY (2<<10) +#define ADPA_DPMS_OFF (3<<10) + +/* Hotplug control (945+ only) */ +#define PORT_HOTPLUG_EN 0x61110 +#define SDVOB_HOTPLUG_INT_EN (1 << 26) +#define SDVOC_HOTPLUG_INT_EN (1 << 25) +#define TV_HOTPLUG_INT_EN (1 << 18) +#define CRT_HOTPLUG_INT_EN (1 << 9) +#define CRT_HOTPLUG_FORCE_DETECT (1 << 3) + +#define PORT_HOTPLUG_STAT 0x61114 +#define CRT_HOTPLUG_INT_STATUS (1 << 11) +#define TV_HOTPLUG_INT_STATUS (1 << 10) +#define CRT_HOTPLUG_MONITOR_MASK (3 << 8) +#define CRT_HOTPLUG_MONITOR_COLOR (3 << 8) +#define CRT_HOTPLUG_MONITOR_MONO (2 << 8) +#define CRT_HOTPLUG_MONITOR_NONE (0 << 8) +#define SDVOC_HOTPLUG_INT_STATUS (1 << 7) +#define SDVOB_HOTPLUG_INT_STATUS (1 << 6) + +/* SDVO port control */ +#define SDVOB 0x61140 +#define SDVOC 0x61160 +#define SDVO_ENABLE (1 << 31) +#define SDVO_PIPE_B_SELECT (1 << 30) +#define SDVO_STALL_SELECT (1 << 29) +#define SDVO_INTERRUPT_ENABLE (1 << 26) +/** + * 915G/GM SDVO pixel multiplier. + * + * Programmed value is multiplier - 1, up to 5x. + * + * \sa DPLL_MD_UDI_MULTIPLIER_MASK + */ +#define SDVO_PORT_MULTIPLY_MASK (7 << 23) +#define SDVO_PORT_MULTIPLY_SHIFT 23 +#define SDVO_PHASE_SELECT_MASK (15 << 19) +#define SDVO_PHASE_SELECT_DEFAULT (6 << 19) +#define SDVO_CLOCK_OUTPUT_INVERT (1 << 18) +#define SDVOC_GANG_MODE (1 << 16) +#define SDVO_BORDER_ENABLE (1 << 7) +#define SDVOB_PCIE_CONCURRENCY (1 << 3) +#define SDVO_DETECTED (1 << 2) +/* Bits to be preserved when writing */ +#define SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14) | (1 << 26)) +#define SDVOC_PRESERVE_MASK ((1 << 17) | (1 << 26)) + +/* DVO port control */ +#define DVOA 0x61120 +#define DVOB 0x61140 +#define DVOC 0x61160 +#define DVO_ENABLE (1 << 31) +#define DVO_PIPE_B_SELECT (1 << 30) +#define DVO_PIPE_STALL_UNUSED (0 << 28) +#define DVO_PIPE_STALL (1 << 28) +#define DVO_PIPE_STALL_TV (2 << 28) +#define DVO_PIPE_STALL_MASK (3 << 28) +#define DVO_USE_VGA_SYNC (1 << 15) +#define DVO_DATA_ORDER_I740 (0 << 14) +#define DVO_DATA_ORDER_FP (1 << 14) +#define DVO_VSYNC_DISABLE (1 << 11) +#define DVO_HSYNC_DISABLE (1 << 10) +#define DVO_VSYNC_TRISTATE (1 << 9) +#define DVO_HSYNC_TRISTATE (1 << 8) +#define DVO_BORDER_ENABLE (1 << 7) +#define DVO_DATA_ORDER_GBRG (1 << 6) +#define DVO_DATA_ORDER_RGGB (0 << 6) +#define DVO_DATA_ORDER_GBRG_ERRATA (0 << 6) +#define DVO_DATA_ORDER_RGGB_ERRATA (1 << 6) +#define DVO_VSYNC_ACTIVE_HIGH (1 << 4) +#define DVO_HSYNC_ACTIVE_HIGH (1 << 3) +#define DVO_BLANK_ACTIVE_HIGH (1 << 2) +#define DVO_OUTPUT_CSTATE_PIXELS (1 << 1) /* SDG only */ +#define DVO_OUTPUT_SOURCE_SIZE_PIXELS (1 << 0) /* SDG only */ +#define DVO_PRESERVE_MASK (0x7<<24) +#define DVOA_SRCDIM 0x61124 +#define DVOB_SRCDIM 0x61144 +#define DVOC_SRCDIM 0x61164 +#define DVO_SRCDIM_HORIZONTAL_SHIFT 12 +#define DVO_SRCDIM_VERTICAL_SHIFT 0 + +/* LVDS port control */ +#define LVDS 0x61180 +/* + * Enables the LVDS port. This bit must be set before DPLLs are enabled, as + * the DPLL semantics change when the LVDS is assigned to that pipe. + */ +#define LVDS_PORT_EN (1 << 31) +/* Selects pipe B for LVDS data. Must be set on pre-965. */ +#define LVDS_PIPEB_SELECT (1 << 30) +/* + * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per + * pixel. + */ +#define LVDS_A0A2_CLKA_POWER_MASK (3 << 8) +#define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8) +#define LVDS_A0A2_CLKA_POWER_UP (3 << 8) +/* + * Controls the A3 data pair, which contains the additional LSBs for 24 bit + * mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be + * on. + */ +#define LVDS_A3_POWER_MASK (3 << 6) +#define LVDS_A3_POWER_DOWN (0 << 6) +#define LVDS_A3_POWER_UP (3 << 6) +/* + * Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP + * is set. + */ +#define LVDS_CLKB_POWER_MASK (3 << 4) +#define LVDS_CLKB_POWER_DOWN (0 << 4) +#define LVDS_CLKB_POWER_UP (3 << 4) +/* + * Controls the B0-B3 data pairs. This must be set to match the DPLL p2 + * setting for whether we are in dual-channel mode. The B3 pair will + * additionally only be powered up when LVDS_A3_POWER_UP is set. + */ +#define LVDS_B0B3_POWER_MASK (3 << 2) +#define LVDS_B0B3_POWER_DOWN (0 << 2) +#define LVDS_B0B3_POWER_UP (3 << 2) + +/* Panel power sequencing */ +#define PP_STATUS 0x61200 +#define PP_ON (1 << 31) +/* + * Indicates that all dependencies of the panel are on: + * + * - PLL enabled + * - pipe enabled + * - LVDS/DVOB/DVOC on + */ +#define PP_READY (1 << 30) +#define PP_SEQUENCE_NONE (0 << 28) +#define PP_SEQUENCE_ON (1 << 28) +#define PP_SEQUENCE_OFF (2 << 28) +#define PP_SEQUENCE_MASK 0x30000000 +#define PP_CONTROL 0x61204 +#define POWER_TARGET_ON (1 << 0) +#define PP_ON_DELAYS 0x61208 +#define PP_OFF_DELAYS 0x6120c +#define PP_DIVISOR 0x61210 + +/* Panel fitting */ +#define PFIT_CONTROL 0x61230 +#define PFIT_ENABLE (1 << 31) +#define PFIT_PIPE_MASK (3 << 29) +#define PFIT_PIPE_SHIFT 29 +#define VERT_INTERP_DISABLE (0 << 10) +#define VERT_INTERP_BILINEAR (1 << 10) +#define VERT_INTERP_MASK (3 << 10) +#define VERT_AUTO_SCALE (1 << 9) +#define HORIZ_INTERP_DISABLE (0 << 6) +#define HORIZ_INTERP_BILINEAR (1 << 6) +#define HORIZ_INTERP_MASK (3 << 6) +#define HORIZ_AUTO_SCALE (1 << 5) +#define PANEL_8TO6_DITHER_ENABLE (1 << 3) +#define PFIT_PGM_RATIOS 0x61234 +#define PFIT_VERT_SCALE_MASK 0xfff00000 +#define PFIT_HORIZ_SCALE_MASK 0x0000fff0 +#define PFIT_AUTO_RATIOS 0x61238 + +/* Backlight control */ +#define BLC_PWM_CTL 0x61254 +#define BACKLIGHT_MODULATION_FREQ_SHIFT (17) +#define BLC_PWM_CTL2 0x61250 /* 965+ only */ +#define BLM_COMBINATION_MODE (1 << 30) +/* + * This is the most significant 15 bits of the number of backlight cycles in a + * complete cycle of the modulated backlight control. + * + * The actual value is this field multiplied by two. + */ +#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17) +#define BLM_LEGACY_MODE (1 << 16) +/* + * This is the number of cycles out of the backlight modulation cycle for which + * the backlight is on. + * + * This field must be no greater than the number of cycles in the complete + * backlight modulation cycle. + */ +#define BACKLIGHT_DUTY_CYCLE_SHIFT (0) +#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff) + +/* TV port control */ +#define TV_CTL 0x68000 +/** Enables the TV encoder */ +# define TV_ENC_ENABLE (1 << 31) +/** Sources the TV encoder input from pipe B instead of A. */ +# define TV_ENC_PIPEB_SELECT (1 << 30) +/** Outputs composite video (DAC A only) */ +# define TV_ENC_OUTPUT_COMPOSITE (0 << 28) +/** Outputs SVideo video (DAC B/C) */ +# define TV_ENC_OUTPUT_SVIDEO (1 << 28) +/** Outputs Component video (DAC A/B/C) */ +# define TV_ENC_OUTPUT_COMPONENT (2 << 28) +/** Outputs Composite and SVideo (DAC A/B/C) */ +# define TV_ENC_OUTPUT_SVIDEO_COMPOSITE (3 << 28) +# define TV_TRILEVEL_SYNC (1 << 21) +/** Enables slow sync generation (945GM only) */ +# define TV_SLOW_SYNC (1 << 20) +/** Selects 4x oversampling for 480i and 576p */ +# define TV_OVERSAMPLE_4X (0 << 18) +/** Selects 2x oversampling for 720p and 1080i */ +# define TV_OVERSAMPLE_2X (1 << 18) +/** Selects no oversampling for 1080p */ +# define TV_OVERSAMPLE_NONE (2 << 18) +/** Selects 8x oversampling */ +# define TV_OVERSAMPLE_8X (3 << 18) +/** Selects progressive mode rather than interlaced */ +# define TV_PROGRESSIVE (1 << 17) +/** Sets the colorburst to PAL mode. Required for non-M PAL modes. */ +# define TV_PAL_BURST (1 << 16) +/** Field for setting delay of Y compared to C */ +# define TV_YC_SKEW_MASK (7 << 12) +/** Enables a fix for 480p/576p standard definition modes on the 915GM only */ +# define TV_ENC_SDP_FIX (1 << 11) +/** + * Enables a fix for the 915GM only. + * + * Not sure what it does. + */ +# define TV_ENC_C0_FIX (1 << 10) +/** Bits that must be preserved by software */ +# define TV_CTL_SAVE ((3 << 8) | (3 << 6)) +# define TV_FUSE_STATE_MASK (3 << 4) +/** Read-only state that reports all features enabled */ +# define TV_FUSE_STATE_ENABLED (0 << 4) +/** Read-only state that reports that Macrovision is disabled in hardware*/ +# define TV_FUSE_STATE_NO_MACROVISION (1 << 4) +/** Read-only state that reports that TV-out is disabled in hardware. */ +# define TV_FUSE_STATE_DISABLED (2 << 4) +/** Normal operation */ +# define TV_TEST_MODE_NORMAL (0 << 0) +/** Encoder test pattern 1 - combo pattern */ +# define TV_TEST_MODE_PATTERN_1 (1 << 0) +/** Encoder test pattern 2 - full screen vertical 75% color bars */ +# define TV_TEST_MODE_PATTERN_2 (2 << 0) +/** Encoder test pattern 3 - full screen horizontal 75% color bars */ +# define TV_TEST_MODE_PATTERN_3 (3 << 0) +/** Encoder test pattern 4 - random noise */ +# define TV_TEST_MODE_PATTERN_4 (4 << 0) +/** Encoder test pattern 5 - linear color ramps */ +# define TV_TEST_MODE_PATTERN_5 (5 << 0) +/** + * This test mode forces the DACs to 50% of full output. + * + * This is used for load detection in combination with TVDAC_SENSE_MASK + */ +# define TV_TEST_MODE_MONITOR_DETECT (7 << 0) +# define TV_TEST_MODE_MASK (7 << 0) + +#define TV_DAC 0x68004 +/** + * Reports that DAC state change logic has reported change (RO). + * + * This gets cleared when TV_DAC_STATE_EN is cleared +*/ +# define TVDAC_STATE_CHG (1 << 31) +# define TVDAC_SENSE_MASK (7 << 28) +/** Reports that DAC A voltage is above the detect threshold */ +# define TVDAC_A_SENSE (1 << 30) +/** Reports that DAC B voltage is above the detect threshold */ +# define TVDAC_B_SENSE (1 << 29) +/** Reports that DAC C voltage is above the detect threshold */ +# define TVDAC_C_SENSE (1 << 28) +/** + * Enables DAC state detection logic, for load-based TV detection. + * + * The PLL of the chosen pipe (in TV_CTL) must be running, and the encoder set + * to off, for load detection to work. + */ +# define TVDAC_STATE_CHG_EN (1 << 27) +/** Sets the DAC A sense value to high */ +# define TVDAC_A_SENSE_CTL (1 << 26) +/** Sets the DAC B sense value to high */ +# define TVDAC_B_SENSE_CTL (1 << 25) +/** Sets the DAC C sense value to high */ +# define TVDAC_C_SENSE_CTL (1 << 24) +/** Overrides the ENC_ENABLE and DAC voltage levels */ +# define DAC_CTL_OVERRIDE (1 << 7) +/** Sets the slew rate. Must be preserved in software */ +# define ENC_TVDAC_SLEW_FAST (1 << 6) +# define DAC_A_1_3_V (0 << 4) +# define DAC_A_1_1_V (1 << 4) +# define DAC_A_0_7_V (2 << 4) +# define DAC_A_OFF (3 << 4) +# define DAC_B_1_3_V (0 << 2) +# define DAC_B_1_1_V (1 << 2) +# define DAC_B_0_7_V (2 << 2) +# define DAC_B_OFF (3 << 2) +# define DAC_C_1_3_V (0 << 0) +# define DAC_C_1_1_V (1 << 0) +# define DAC_C_0_7_V (2 << 0) +# define DAC_C_OFF (3 << 0) + +/** + * CSC coefficients are stored in a floating point format with 9 bits of + * mantissa and 2 or 3 bits of exponent. The exponent is represented as 2**-n, + * where 2-bit exponents are unsigned n, and 3-bit exponents are signed n with + * -1 (0x3) being the only legal negative value. + */ +#define TV_CSC_Y 0x68010 +# define TV_RY_MASK 0x07ff0000 +# define TV_RY_SHIFT 16 +# define TV_GY_MASK 0x00000fff +# define TV_GY_SHIFT 0 + +#define TV_CSC_Y2 0x68014 +# define TV_BY_MASK 0x07ff0000 +# define TV_BY_SHIFT 16 +/** + * Y attenuation for component video. + * + * Stored in 1.9 fixed point. + */ +# define TV_AY_MASK 0x000003ff +# define TV_AY_SHIFT 0 + +#define TV_CSC_U 0x68018 +# define TV_RU_MASK 0x07ff0000 +# define TV_RU_SHIFT 16 +# define TV_GU_MASK 0x000007ff +# define TV_GU_SHIFT 0 + +#define TV_CSC_U2 0x6801c +# define TV_BU_MASK 0x07ff0000 +# define TV_BU_SHIFT 16 +/** + * U attenuation for component video. + * + * Stored in 1.9 fixed point. + */ +# define TV_AU_MASK 0x000003ff +# define TV_AU_SHIFT 0 + +#define TV_CSC_V 0x68020 +# define TV_RV_MASK 0x0fff0000 +# define TV_RV_SHIFT 16 +# define TV_GV_MASK 0x000007ff +# define TV_GV_SHIFT 0 + +#define TV_CSC_V2 0x68024 +# define TV_BV_MASK 0x07ff0000 +# define TV_BV_SHIFT 16 +/** + * V attenuation for component video. + * + * Stored in 1.9 fixed point. + */ +# define TV_AV_MASK 0x000007ff +# define TV_AV_SHIFT 0 + +#define TV_CLR_KNOBS 0x68028 +/** 2s-complement brightness adjustment */ +# define TV_BRIGHTNESS_MASK 0xff000000 +# define TV_BRIGHTNESS_SHIFT 24 +/** Contrast adjustment, as a 2.6 unsigned floating point number */ +# define TV_CONTRAST_MASK 0x00ff0000 +# define TV_CONTRAST_SHIFT 16 +/** Saturation adjustment, as a 2.6 unsigned floating point number */ +# define TV_SATURATION_MASK 0x0000ff00 +# define TV_SATURATION_SHIFT 8 +/** Hue adjustment, as an integer phase angle in degrees */ +# define TV_HUE_MASK 0x000000ff +# define TV_HUE_SHIFT 0 + +#define TV_CLR_LEVEL 0x6802c +/** Controls the DAC level for black */ +# define TV_BLACK_LEVEL_MASK 0x01ff0000 +# define TV_BLACK_LEVEL_SHIFT 16 +/** Controls the DAC level for blanking */ +# define TV_BLANK_LEVEL_MASK 0x000001ff +# define TV_BLANK_LEVEL_SHIFT 0 + +#define TV_H_CTL_1 0x68030 +/** Number of pixels in the hsync. */ +# define TV_HSYNC_END_MASK 0x1fff0000 +# define TV_HSYNC_END_SHIFT 16 +/** Total number of pixels minus one in the line (display and blanking). */ +# define TV_HTOTAL_MASK 0x00001fff +# define TV_HTOTAL_SHIFT 0 + +#define TV_H_CTL_2 0x68034 +/** Enables the colorburst (needed for non-component color) */ +# define TV_BURST_ENA (1 << 31) +/** Offset of the colorburst from the start of hsync, in pixels minus one. */ +# define TV_HBURST_START_SHIFT 16 +# define TV_HBURST_START_MASK 0x1fff0000 +/** Length of the colorburst */ +# define TV_HBURST_LEN_SHIFT 0 +# define TV_HBURST_LEN_MASK 0x0001fff + +#define TV_H_CTL_3 0x68038 +/** End of hblank, measured in pixels minus one from start of hsync */ +# define TV_HBLANK_END_SHIFT 16 +# define TV_HBLANK_END_MASK 0x1fff0000 +/** Start of hblank, measured in pixels minus one from start of hsync */ +# define TV_HBLANK_START_SHIFT 0 +# define TV_HBLANK_START_MASK 0x0001fff + +#define TV_V_CTL_1 0x6803c +/** XXX */ +# define TV_NBR_END_SHIFT 16 +# define TV_NBR_END_MASK 0x07ff0000 +/** XXX */ +# define TV_VI_END_F1_SHIFT 8 +# define TV_VI_END_F1_MASK 0x00003f00 +/** XXX */ +# define TV_VI_END_F2_SHIFT 0 +# define TV_VI_END_F2_MASK 0x0000003f + +#define TV_V_CTL_2 0x68040 +/** Length of vsync, in half lines */ +# define TV_VSYNC_LEN_MASK 0x07ff0000 +# define TV_VSYNC_LEN_SHIFT 16 +/** Offset of the start of vsync in field 1, measured in one less than the + * number of half lines. + */ +# define TV_VSYNC_START_F1_MASK 0x00007f00 +# define TV_VSYNC_START_F1_SHIFT 8 +/** + * Offset of the start of vsync in field 2, measured in one less than the + * number of half lines. + */ +# define TV_VSYNC_START_F2_MASK 0x0000007f +# define TV_VSYNC_START_F2_SHIFT 0 + +#define TV_V_CTL_3 0x68044 +/** Enables generation of the equalization signal */ +# define TV_EQUAL_ENA (1 << 31) +/** Length of vsync, in half lines */ +# define TV_VEQ_LEN_MASK 0x007f0000 +# define TV_VEQ_LEN_SHIFT 16 +/** Offset of the start of equalization in field 1, measured in one less than + * the number of half lines. + */ +# define TV_VEQ_START_F1_MASK 0x0007f00 +# define TV_VEQ_START_F1_SHIFT 8 +/** + * Offset of the start of equalization in field 2, measured in one less than + * the number of half lines. + */ +# define TV_VEQ_START_F2_MASK 0x000007f +# define TV_VEQ_START_F2_SHIFT 0 + +#define TV_V_CTL_4 0x68048 +/** + * Offset to start of vertical colorburst, measured in one less than the + * number of lines from vertical start. + */ +# define TV_VBURST_START_F1_MASK 0x003f0000 +# define TV_VBURST_START_F1_SHIFT 16 +/** + * Offset to the end of vertical colorburst, measured in one less than the + * number of lines from the start of NBR. + */ +# define TV_VBURST_END_F1_MASK 0x000000ff +# define TV_VBURST_END_F1_SHIFT 0 + +#define TV_V_CTL_5 0x6804c +/** + * Offset to start of vertical colorburst, measured in one less than the + * number of lines from vertical start. + */ +# define TV_VBURST_START_F2_MASK 0x003f0000 +# define TV_VBURST_START_F2_SHIFT 16 +/** + * Offset to the end of vertical colorburst, measured in one less than the + * number of lines from the start of NBR. + */ +# define TV_VBURST_END_F2_MASK 0x000000ff +# define TV_VBURST_END_F2_SHIFT 0 + +#define TV_V_CTL_6 0x68050 +/** + * Offset to start of vertical colorburst, measured in one less than the + * number of lines from vertical start. + */ +# define TV_VBURST_START_F3_MASK 0x003f0000 +# define TV_VBURST_START_F3_SHIFT 16 +/** + * Offset to the end of vertical colorburst, measured in one less than the + * number of lines from the start of NBR. + */ +# define TV_VBURST_END_F3_MASK 0x000000ff +# define TV_VBURST_END_F3_SHIFT 0 + +#define TV_V_CTL_7 0x68054 +/** + * Offset to start of vertical colorburst, measured in one less than the + * number of lines from vertical start. + */ +# define TV_VBURST_START_F4_MASK 0x003f0000 +# define TV_VBURST_START_F4_SHIFT 16 +/** + * Offset to the end of vertical colorburst, measured in one less than the + * number of lines from the start of NBR. + */ +# define TV_VBURST_END_F4_MASK 0x000000ff +# define TV_VBURST_END_F4_SHIFT 0 + +#define TV_SC_CTL_1 0x68060 +/** Turns on the first subcarrier phase generation DDA */ +# define TV_SC_DDA1_EN (1 << 31) +/** Turns on the first subcarrier phase generation DDA */ +# define TV_SC_DDA2_EN (1 << 30) +/** Turns on the first subcarrier phase generation DDA */ +# define TV_SC_DDA3_EN (1 << 29) +/** Sets the subcarrier DDA to reset frequency every other field */ +# define TV_SC_RESET_EVERY_2 (0 << 24) +/** Sets the subcarrier DDA to reset frequency every fourth field */ +# define TV_SC_RESET_EVERY_4 (1 << 24) +/** Sets the subcarrier DDA to reset frequency every eighth field */ +# define TV_SC_RESET_EVERY_8 (2 << 24) +/** Sets the subcarrier DDA to never reset the frequency */ +# define TV_SC_RESET_NEVER (3 << 24) +/** Sets the peak amplitude of the colorburst.*/ +# define TV_BURST_LEVEL_MASK 0x00ff0000 +# define TV_BURST_LEVEL_SHIFT 16 +/** Sets the increment of the first subcarrier phase generation DDA */ +# define TV_SCDDA1_INC_MASK 0x00000fff +# define TV_SCDDA1_INC_SHIFT 0 + +#define TV_SC_CTL_2 0x68064 +/** Sets the rollover for the second subcarrier phase generation DDA */ +# define TV_SCDDA2_SIZE_MASK 0x7fff0000 +# define TV_SCDDA2_SIZE_SHIFT 16 +/** Sets the increent of the second subcarrier phase generation DDA */ +# define TV_SCDDA2_INC_MASK 0x00007fff +# define TV_SCDDA2_INC_SHIFT 0 + +#define TV_SC_CTL_3 0x68068 +/** Sets the rollover for the third subcarrier phase generation DDA */ +# define TV_SCDDA3_SIZE_MASK 0x7fff0000 +# define TV_SCDDA3_SIZE_SHIFT 16 +/** Sets the increent of the third subcarrier phase generation DDA */ +# define TV_SCDDA3_INC_MASK 0x00007fff +# define TV_SCDDA3_INC_SHIFT 0 + +#define TV_WIN_POS 0x68070 +/** X coordinate of the display from the start of horizontal active */ +# define TV_XPOS_MASK 0x1fff0000 +# define TV_XPOS_SHIFT 16 +/** Y coordinate of the display from the start of vertical active (NBR) */ +# define TV_YPOS_MASK 0x00000fff +# define TV_YPOS_SHIFT 0 + +#define TV_WIN_SIZE 0x68074 +/** Horizontal size of the display window, measured in pixels*/ +# define TV_XSIZE_MASK 0x1fff0000 +# define TV_XSIZE_SHIFT 16 +/** + * Vertical size of the display window, measured in pixels. + * + * Must be even for interlaced modes. + */ +# define TV_YSIZE_MASK 0x00000fff +# define TV_YSIZE_SHIFT 0 + +#define TV_FILTER_CTL_1 0x68080 +/** + * Enables automatic scaling calculation. + * + * If set, the rest of the registers are ignored, and the calculated values can + * be read back from the register. + */ +# define TV_AUTO_SCALE (1 << 31) +/** + * Disables the vertical filter. + * + * This is required on modes more than 1024 pixels wide */ +# define TV_V_FILTER_BYPASS (1 << 29) +/** Enables adaptive vertical filtering */ +# define TV_VADAPT (1 << 28) +# define TV_VADAPT_MODE_MASK (3 << 26) +/** Selects the least adaptive vertical filtering mode */ +# define TV_VADAPT_MODE_LEAST (0 << 26) +/** Selects the moderately adaptive vertical filtering mode */ +# define TV_VADAPT_MODE_MODERATE (1 << 26) +/** Selects the most adaptive vertical filtering mode */ +# define TV_VADAPT_MODE_MOST (3 << 26) +/** + * Sets the horizontal scaling factor. + * + * This should be the fractional part of the horizontal scaling factor divided + * by the oversampling rate. TV_HSCALE should be less than 1, and set to: + * + * (src width - 1) / ((oversample * dest width) - 1) + */ +# define TV_HSCALE_FRAC_MASK 0x00003fff +# define TV_HSCALE_FRAC_SHIFT 0 + +#define TV_FILTER_CTL_2 0x68084 +/** + * Sets the integer part of the 3.15 fixed-point vertical scaling factor. + * + * TV_VSCALE should be (src height - 1) / ((interlace * dest height) - 1) + */ +# define TV_VSCALE_INT_MASK 0x00038000 +# define TV_VSCALE_INT_SHIFT 15 +/** + * Sets the fractional part of the 3.15 fixed-point vertical scaling factor. + * + * \sa TV_VSCALE_INT_MASK + */ +# define TV_VSCALE_FRAC_MASK 0x00007fff +# define TV_VSCALE_FRAC_SHIFT 0 + +#define TV_FILTER_CTL_3 0x68088 +/** + * Sets the integer part of the 3.15 fixed-point vertical scaling factor. + * + * TV_VSCALE should be (src height - 1) / (1/4 * (dest height - 1)) + * + * For progressive modes, TV_VSCALE_IP_INT should be set to zeroes. + */ +# define TV_VSCALE_IP_INT_MASK 0x00038000 +# define TV_VSCALE_IP_INT_SHIFT 15 +/** + * Sets the fractional part of the 3.15 fixed-point vertical scaling factor. + * + * For progressive modes, TV_VSCALE_IP_INT should be set to zeroes. + * + * \sa TV_VSCALE_IP_INT_MASK + */ +# define TV_VSCALE_IP_FRAC_MASK 0x00007fff +# define TV_VSCALE_IP_FRAC_SHIFT 0 + +#define TV_CC_CONTROL 0x68090 +# define TV_CC_ENABLE (1 << 31) +/** + * Specifies which field to send the CC data in. + * + * CC data is usually sent in field 0. + */ +# define TV_CC_FID_MASK (1 << 27) +# define TV_CC_FID_SHIFT 27 +/** Sets the horizontal position of the CC data. Usually 135. */ +# define TV_CC_HOFF_MASK 0x03ff0000 +# define TV_CC_HOFF_SHIFT 16 +/** Sets the vertical position of the CC data. Usually 21 */ +# define TV_CC_LINE_MASK 0x0000003f +# define TV_CC_LINE_SHIFT 0 + +#define TV_CC_DATA 0x68094 +# define TV_CC_RDY (1 << 31) +/** Second word of CC data to be transmitted. */ +# define TV_CC_DATA_2_MASK 0x007f0000 +# define TV_CC_DATA_2_SHIFT 16 +/** First word of CC data to be transmitted. */ +# define TV_CC_DATA_1_MASK 0x0000007f +# define TV_CC_DATA_1_SHIFT 0 + +#define TV_H_LUMA_0 0x68100 +#define TV_H_LUMA_59 0x681ec +#define TV_H_CHROMA_0 0x68200 +#define TV_H_CHROMA_59 0x682ec +#define TV_V_LUMA_0 0x68300 +#define TV_V_LUMA_42 0x683a8 +#define TV_V_CHROMA_0 0x68400 +#define TV_V_CHROMA_42 0x684a8 + +/* Display & cursor control */ + +/* Pipe A */ +#define PIPEADSL 0x70000 +#define PIPEACONF 0x70008 +#define PIPEACONF_ENABLE (1<<31) +#define PIPEACONF_DISABLE 0 +#define PIPEACONF_DOUBLE_WIDE (1<<30) +#define I965_PIPECONF_ACTIVE (1<<30) +#define PIPEACONF_SINGLE_WIDE 0 +#define PIPEACONF_PIPE_UNLOCKED 0 +#define PIPEACONF_PIPE_LOCKED (1<<25) +#define PIPEACONF_PALETTE 0 +#define PIPEACONF_GAMMA (1<<24) +#define PIPECONF_FORCE_BORDER (1<<25) +#define PIPECONF_PROGRESSIVE (0 << 21) +#define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21) +#define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21) +#define PIPEASTAT 0x70024 +#define PIPE_FIFO_UNDERRUN_STATUS (1UL<<31) +#define PIPE_CRC_ERROR_ENABLE (1UL<<29) +#define PIPE_CRC_DONE_ENABLE (1UL<<28) +#define PIPE_GMBUS_EVENT_ENABLE (1UL<<27) +#define PIPE_HOTPLUG_INTERRUPT_ENABLE (1UL<<26) +#define PIPE_VSYNC_INTERRUPT_ENABLE (1UL<<25) +#define PIPE_DISPLAY_LINE_COMPARE_ENABLE (1UL<<24) +#define PIPE_DPST_EVENT_ENABLE (1UL<<23) +#define PIPE_LEGACY_BLC_EVENT_ENABLE (1UL<<22) +#define PIPE_ODD_FIELD_INTERRUPT_ENABLE (1UL<<21) +#define PIPE_EVEN_FIELD_INTERRUPT_ENABLE (1UL<<20) +#define PIPE_HOTPLUG_TV_INTERRUPT_ENABLE (1UL<<18) /* pre-965 */ +#define PIPE_START_VBLANK_INTERRUPT_ENABLE (1UL<<18) /* 965 or later */ +#define PIPE_VBLANK_INTERRUPT_ENABLE (1UL<<17) +#define PIPE_OVERLAY_UPDATED_ENABLE (1UL<<16) +#define PIPE_CRC_ERROR_INTERRUPT_STATUS (1UL<<13) +#define PIPE_CRC_DONE_INTERRUPT_STATUS (1UL<<12) +#define PIPE_GMBUS_INTERRUPT_STATUS (1UL<<11) +#define PIPE_HOTPLUG_INTERRUPT_STATUS (1UL<<10) +#define PIPE_VSYNC_INTERRUPT_STATUS (1UL<<9) +#define PIPE_DISPLAY_LINE_COMPARE_STATUS (1UL<<8) +#define PIPE_DPST_EVENT_STATUS (1UL<<7) +#define PIPE_LEGACY_BLC_EVENT_STATUS (1UL<<6) +#define PIPE_ODD_FIELD_INTERRUPT_STATUS (1UL<<5) +#define PIPE_EVEN_FIELD_INTERRUPT_STATUS (1UL<<4) +#define PIPE_HOTPLUG_TV_INTERRUPT_STATUS (1UL<<2) /* pre-965 */ +#define PIPE_START_VBLANK_INTERRUPT_STATUS (1UL<<2) /* 965 or later */ +#define PIPE_VBLANK_INTERRUPT_STATUS (1UL<<1) +#define PIPE_OVERLAY_UPDATED_STATUS (1UL<<0) + +#define DSPARB 0x70030 +#define DSPARB_CSTART_MASK (0x7f << 7) +#define DSPARB_CSTART_SHIFT 7 +#define DSPARB_BSTART_MASK (0x7f) +#define DSPARB_BSTART_SHIFT 0 +/* + * The two pipe frame counter registers are not synchronized, so + * reading a stable value is somewhat tricky. The following code + * should work: + * + * do { + * high1 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >> + * PIPE_FRAME_HIGH_SHIFT; + * low1 = ((INREG(PIPEAFRAMEPIXEL) & PIPE_FRAME_LOW_MASK) >> + * PIPE_FRAME_LOW_SHIFT); + * high2 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >> + * PIPE_FRAME_HIGH_SHIFT); + * } while (high1 != high2); + * frame = (high1 << 8) | low1; + */ +#define PIPEAFRAMEHIGH 0x70040 +#define PIPE_FRAME_HIGH_MASK 0x0000ffff +#define PIPE_FRAME_HIGH_SHIFT 0 +#define PIPEAFRAMEPIXEL 0x70044 +#define PIPE_FRAME_LOW_MASK 0xff000000 +#define PIPE_FRAME_LOW_SHIFT 24 +#define PIPE_PIXEL_MASK 0x00ffffff +#define PIPE_PIXEL_SHIFT 0 + +/* Cursor A & B regs */ +#define CURACNTR 0x70080 +#define CURSOR_MODE_DISABLE 0x00 +#define CURSOR_MODE_64_32B_AX 0x07 +#define CURSOR_MODE_64_ARGB_AX ((1 << 5) | CURSOR_MODE_64_32B_AX) +#define MCURSOR_GAMMA_ENABLE (1 << 26) +#define CURABASE 0x70084 +#define CURAPOS 0x70088 +#define CURSOR_POS_MASK 0x007FF +#define CURSOR_POS_SIGN 0x8000 +#define CURSOR_X_SHIFT 0 +#define CURSOR_Y_SHIFT 16 +#define CURBCNTR 0x700c0 +#define CURBBASE 0x700c4 +#define CURBPOS 0x700c8 + +/* Display A control */ +#define DSPACNTR 0x70180 +#define DISPLAY_PLANE_ENABLE (1<<31) +#define DISPLAY_PLANE_DISABLE 0 +#define DISPPLANE_GAMMA_ENABLE (1<<30) +#define DISPPLANE_GAMMA_DISABLE 0 +#define DISPPLANE_PIXFORMAT_MASK (0xf<<26) +#define DISPPLANE_8BPP (0x2<<26) +#define DISPPLANE_15_16BPP (0x4<<26) +#define DISPPLANE_16BPP (0x5<<26) +#define DISPPLANE_32BPP_NO_ALPHA (0x6<<26) +#define DISPPLANE_32BPP (0x7<<26) +#define DISPPLANE_STEREO_ENABLE (1<<25) +#define DISPPLANE_STEREO_DISABLE 0 +#define DISPPLANE_SEL_PIPE_MASK (1<<24) +#define DISPPLANE_SEL_PIPE_A 0 +#define DISPPLANE_SEL_PIPE_B (1<<24) +#define DISPPLANE_SRC_KEY_ENABLE (1<<22) +#define DISPPLANE_SRC_KEY_DISABLE 0 +#define DISPPLANE_LINE_DOUBLE (1<<20) +#define DISPPLANE_NO_LINE_DOUBLE 0 +#define DISPPLANE_STEREO_POLARITY_FIRST 0 +#define DISPPLANE_STEREO_POLARITY_SECOND (1<<18) +#define DSPAADDR 0x70184 +#define DSPASTRIDE 0x70188 +#define DSPAPOS 0x7018C /* reserved */ +#define DSPASIZE 0x70190 +#define DSPASURF 0x7019C /* 965+ only */ +#define DSPATILEOFF 0x701A4 /* 965+ only */ + +/* VBIOS flags */ +#define SWF00 0x71410 +#define SWF01 0x71414 +#define SWF02 0x71418 +#define SWF03 0x7141c +#define SWF04 0x71420 +#define SWF05 0x71424 +#define SWF06 0x71428 +#define SWF10 0x70410 +#define SWF11 0x70414 +#define SWF14 0x71420 +#define SWF30 0x72414 +#define SWF31 0x72418 +#define SWF32 0x7241c + +/* Pipe B */ +#define PIPEBDSL 0x71000 +#define PIPEBCONF 0x71008 +#define PIPEBSTAT 0x71024 +#define PIPEBFRAMEHIGH 0x71040 +#define PIPEBFRAMEPIXEL 0x71044 + +/* Display B control */ +#define DSPBCNTR 0x71180 +#define DISPPLANE_ALPHA_TRANS_ENABLE (1<<15) +#define DISPPLANE_ALPHA_TRANS_DISABLE 0 +#define DISPPLANE_SPRITE_ABOVE_DISPLAY 0 +#define DISPPLANE_SPRITE_ABOVE_OVERLAY (1) +#define DSPBADDR 0x71184 +#define DSPBSTRIDE 0x71188 +#define DSPBPOS 0x7118C +#define DSPBSIZE 0x71190 +#define DSPBSURF 0x7119C +#define DSPBTILEOFF 0x711A4 + +/* VBIOS regs */ +#define VGACNTRL 0x71400 +# define VGA_DISP_DISABLE (1 << 31) +# define VGA_2X_MODE (1 << 30) +# define VGA_PIPE_B_SELECT (1 << 29) + +#endif /* _I915_REG_H_ */ diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c new file mode 100644 index 000000000000..603fe742ccd4 --- /dev/null +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -0,0 +1,509 @@ +/* + * + * Copyright 2008 (c) Intel Corporation + * Jesse Barnes <jbarnes@virtuousgeek.org> + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS + * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. + * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR + * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "drmP.h" +#include "drm.h" +#include "i915_drm.h" +#include "i915_drv.h" + +static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (pipe == PIPE_A) + return (I915_READ(DPLL_A) & DPLL_VCO_ENABLE); + else + return (I915_READ(DPLL_B) & DPLL_VCO_ENABLE); +} + +static void i915_save_palette(struct drm_device *dev, enum pipe pipe) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + unsigned long reg = (pipe == PIPE_A ? PALETTE_A : PALETTE_B); + u32 *array; + int i; + + if (!i915_pipe_enabled(dev, pipe)) + return; + + if (pipe == PIPE_A) + array = dev_priv->save_palette_a; + else + array = dev_priv->save_palette_b; + + for(i = 0; i < 256; i++) + array[i] = I915_READ(reg + (i << 2)); +} + +static void i915_restore_palette(struct drm_device *dev, enum pipe pipe) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + unsigned long reg = (pipe == PIPE_A ? PALETTE_A : PALETTE_B); + u32 *array; + int i; + + if (!i915_pipe_enabled(dev, pipe)) + return; + + if (pipe == PIPE_A) + array = dev_priv->save_palette_a; + else + array = dev_priv->save_palette_b; + + for(i = 0; i < 256; i++) + I915_WRITE(reg + (i << 2), array[i]); +} + +static u8 i915_read_indexed(struct drm_device *dev, u16 index_port, u16 data_port, u8 reg) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE8(index_port, reg); + return I915_READ8(data_port); +} + +static u8 i915_read_ar(struct drm_device *dev, u16 st01, u8 reg, u16 palette_enable) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_READ8(st01); + I915_WRITE8(VGA_AR_INDEX, palette_enable | reg); + return I915_READ8(VGA_AR_DATA_READ); +} + +static void i915_write_ar(struct drm_device *dev, u16 st01, u8 reg, u8 val, u16 palette_enable) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_READ8(st01); + I915_WRITE8(VGA_AR_INDEX, palette_enable | reg); + I915_WRITE8(VGA_AR_DATA_WRITE, val); +} + +static void i915_write_indexed(struct drm_device *dev, u16 index_port, u16 data_port, u8 reg, u8 val) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE8(index_port, reg); + I915_WRITE8(data_port, val); +} + +static void i915_save_vga(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int i; + u16 cr_index, cr_data, st01; + + /* VGA color palette registers */ + dev_priv->saveDACMASK = I915_READ8(VGA_DACMASK); + /* DACCRX automatically increments during read */ + I915_WRITE8(VGA_DACRX, 0); + /* Read 3 bytes of color data from each index */ + for (i = 0; i < 256 * 3; i++) + dev_priv->saveDACDATA[i] = I915_READ8(VGA_DACDATA); + + /* MSR bits */ + dev_priv->saveMSR = I915_READ8(VGA_MSR_READ); + if (dev_priv->saveMSR & VGA_MSR_CGA_MODE) { + cr_index = VGA_CR_INDEX_CGA; + cr_data = VGA_CR_DATA_CGA; + st01 = VGA_ST01_CGA; + } else { + cr_index = VGA_CR_INDEX_MDA; + cr_data = VGA_CR_DATA_MDA; + st01 = VGA_ST01_MDA; + } + + /* CRT controller regs */ + i915_write_indexed(dev, cr_index, cr_data, 0x11, + i915_read_indexed(dev, cr_index, cr_data, 0x11) & + (~0x80)); + for (i = 0; i <= 0x24; i++) + dev_priv->saveCR[i] = + i915_read_indexed(dev, cr_index, cr_data, i); + /* Make sure we don't turn off CR group 0 writes */ + dev_priv->saveCR[0x11] &= ~0x80; + + /* Attribute controller registers */ + I915_READ8(st01); + dev_priv->saveAR_INDEX = I915_READ8(VGA_AR_INDEX); + for (i = 0; i <= 0x14; i++) + dev_priv->saveAR[i] = i915_read_ar(dev, st01, i, 0); + I915_READ8(st01); + I915_WRITE8(VGA_AR_INDEX, dev_priv->saveAR_INDEX); + I915_READ8(st01); + + /* Graphics controller registers */ + for (i = 0; i < 9; i++) + dev_priv->saveGR[i] = + i915_read_indexed(dev, VGA_GR_INDEX, VGA_GR_DATA, i); + + dev_priv->saveGR[0x10] = + i915_read_indexed(dev, VGA_GR_INDEX, VGA_GR_DATA, 0x10); + dev_priv->saveGR[0x11] = + i915_read_indexed(dev, VGA_GR_INDEX, VGA_GR_DATA, 0x11); + dev_priv->saveGR[0x18] = + i915_read_indexed(dev, VGA_GR_INDEX, VGA_GR_DATA, 0x18); + + /* Sequencer registers */ + for (i = 0; i < 8; i++) + dev_priv->saveSR[i] = + i915_read_indexed(dev, VGA_SR_INDEX, VGA_SR_DATA, i); +} + +static void i915_restore_vga(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int i; + u16 cr_index, cr_data, st01; + + /* MSR bits */ + I915_WRITE8(VGA_MSR_WRITE, dev_priv->saveMSR); + if (dev_priv->saveMSR & VGA_MSR_CGA_MODE) { + cr_index = VGA_CR_INDEX_CGA; + cr_data = VGA_CR_DATA_CGA; + st01 = VGA_ST01_CGA; + } else { + cr_index = VGA_CR_INDEX_MDA; + cr_data = VGA_CR_DATA_MDA; + st01 = VGA_ST01_MDA; + } + + /* Sequencer registers, don't write SR07 */ + for (i = 0; i < 7; i++) + i915_write_indexed(dev, VGA_SR_INDEX, VGA_SR_DATA, i, + dev_priv->saveSR[i]); + + /* CRT controller regs */ + /* Enable CR group 0 writes */ + i915_write_indexed(dev, cr_index, cr_data, 0x11, dev_priv->saveCR[0x11]); + for (i = 0; i <= 0x24; i++) + i915_write_indexed(dev, cr_index, cr_data, i, dev_priv->saveCR[i]); + + /* Graphics controller regs */ + for (i = 0; i < 9; i++) + i915_write_indexed(dev, VGA_GR_INDEX, VGA_GR_DATA, i, + dev_priv->saveGR[i]); + + i915_write_indexed(dev, VGA_GR_INDEX, VGA_GR_DATA, 0x10, + dev_priv->saveGR[0x10]); + i915_write_indexed(dev, VGA_GR_INDEX, VGA_GR_DATA, 0x11, + dev_priv->saveGR[0x11]); + i915_write_indexed(dev, VGA_GR_INDEX, VGA_GR_DATA, 0x18, + dev_priv->saveGR[0x18]); + + /* Attribute controller registers */ + I915_READ8(st01); /* switch back to index mode */ + for (i = 0; i <= 0x14; i++) + i915_write_ar(dev, st01, i, dev_priv->saveAR[i], 0); + I915_READ8(st01); /* switch back to index mode */ + I915_WRITE8(VGA_AR_INDEX, dev_priv->saveAR_INDEX | 0x20); + I915_READ8(st01); + + /* VGA color palette registers */ + I915_WRITE8(VGA_DACMASK, dev_priv->saveDACMASK); + /* DACCRX automatically increments during read */ + I915_WRITE8(VGA_DACWX, 0); + /* Read 3 bytes of color data from each index */ + for (i = 0; i < 256 * 3; i++) + I915_WRITE8(VGA_DACDATA, dev_priv->saveDACDATA[i]); + +} + +int i915_save_state(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int i; + + pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB); + + /* Display arbitration control */ + dev_priv->saveDSPARB = I915_READ(DSPARB); + + /* Pipe & plane A info */ + dev_priv->savePIPEACONF = I915_READ(PIPEACONF); + dev_priv->savePIPEASRC = I915_READ(PIPEASRC); + dev_priv->saveFPA0 = I915_READ(FPA0); + dev_priv->saveFPA1 = I915_READ(FPA1); + dev_priv->saveDPLL_A = I915_READ(DPLL_A); + if (IS_I965G(dev)) + dev_priv->saveDPLL_A_MD = I915_READ(DPLL_A_MD); + dev_priv->saveHTOTAL_A = I915_READ(HTOTAL_A); + dev_priv->saveHBLANK_A = I915_READ(HBLANK_A); + dev_priv->saveHSYNC_A = I915_READ(HSYNC_A); + dev_priv->saveVTOTAL_A = I915_READ(VTOTAL_A); + dev_priv->saveVBLANK_A = I915_READ(VBLANK_A); + dev_priv->saveVSYNC_A = I915_READ(VSYNC_A); + dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A); + + dev_priv->saveDSPACNTR = I915_READ(DSPACNTR); + dev_priv->saveDSPASTRIDE = I915_READ(DSPASTRIDE); + dev_priv->saveDSPASIZE = I915_READ(DSPASIZE); + dev_priv->saveDSPAPOS = I915_READ(DSPAPOS); + dev_priv->saveDSPAADDR = I915_READ(DSPAADDR); + if (IS_I965G(dev)) { + dev_priv->saveDSPASURF = I915_READ(DSPASURF); + dev_priv->saveDSPATILEOFF = I915_READ(DSPATILEOFF); + } + i915_save_palette(dev, PIPE_A); + dev_priv->savePIPEASTAT = I915_READ(PIPEASTAT); + + /* Pipe & plane B info */ + dev_priv->savePIPEBCONF = I915_READ(PIPEBCONF); + dev_priv->savePIPEBSRC = I915_READ(PIPEBSRC); + dev_priv->saveFPB0 = I915_READ(FPB0); + dev_priv->saveFPB1 = I915_READ(FPB1); + dev_priv->saveDPLL_B = I915_READ(DPLL_B); + if (IS_I965G(dev)) + dev_priv->saveDPLL_B_MD = I915_READ(DPLL_B_MD); + dev_priv->saveHTOTAL_B = I915_READ(HTOTAL_B); + dev_priv->saveHBLANK_B = I915_READ(HBLANK_B); + dev_priv->saveHSYNC_B = I915_READ(HSYNC_B); + dev_priv->saveVTOTAL_B = I915_READ(VTOTAL_B); + dev_priv->saveVBLANK_B = I915_READ(VBLANK_B); + dev_priv->saveVSYNC_B = I915_READ(VSYNC_B); + dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A); + + dev_priv->saveDSPBCNTR = I915_READ(DSPBCNTR); + dev_priv->saveDSPBSTRIDE = I915_READ(DSPBSTRIDE); + dev_priv->saveDSPBSIZE = I915_READ(DSPBSIZE); + dev_priv->saveDSPBPOS = I915_READ(DSPBPOS); + dev_priv->saveDSPBADDR = I915_READ(DSPBADDR); + if (IS_I965GM(dev) || IS_GM45(dev)) { + dev_priv->saveDSPBSURF = I915_READ(DSPBSURF); + dev_priv->saveDSPBTILEOFF = I915_READ(DSPBTILEOFF); + } + i915_save_palette(dev, PIPE_B); + dev_priv->savePIPEBSTAT = I915_READ(PIPEBSTAT); + + /* CRT state */ + dev_priv->saveADPA = I915_READ(ADPA); + + /* LVDS state */ + dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL); + dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS); + dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL); + if (IS_I965G(dev)) + dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2); + if (IS_MOBILE(dev) && !IS_I830(dev)) + dev_priv->saveLVDS = I915_READ(LVDS); + if (!IS_I830(dev) && !IS_845G(dev)) + dev_priv->savePFIT_CONTROL = I915_READ(PFIT_CONTROL); + dev_priv->savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS); + dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS); + dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR); + + /* FIXME: save TV & SDVO state */ + + /* FBC state */ + dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE); + dev_priv->saveFBC_LL_BASE = I915_READ(FBC_LL_BASE); + dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2); + dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL); + + /* Interrupt state */ + dev_priv->saveIIR = I915_READ(IIR); + dev_priv->saveIER = I915_READ(IER); + dev_priv->saveIMR = I915_READ(IMR); + + /* VGA state */ + dev_priv->saveVGA0 = I915_READ(VGA0); + dev_priv->saveVGA1 = I915_READ(VGA1); + dev_priv->saveVGA_PD = I915_READ(VGA_PD); + dev_priv->saveVGACNTRL = I915_READ(VGACNTRL); + + /* Clock gating state */ + dev_priv->saveD_STATE = I915_READ(D_STATE); + dev_priv->saveCG_2D_DIS = I915_READ(CG_2D_DIS); + + /* Cache mode state */ + dev_priv->saveCACHE_MODE_0 = I915_READ(CACHE_MODE_0); + + /* Memory Arbitration state */ + dev_priv->saveMI_ARB_STATE = I915_READ(MI_ARB_STATE); + + /* Scratch space */ + for (i = 0; i < 16; i++) { + dev_priv->saveSWF0[i] = I915_READ(SWF00 + (i << 2)); + dev_priv->saveSWF1[i] = I915_READ(SWF10 + (i << 2)); + } + for (i = 0; i < 3; i++) + dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2)); + + i915_save_vga(dev); + + return 0; +} + +int i915_restore_state(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int i; + + pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB); + + I915_WRITE(DSPARB, dev_priv->saveDSPARB); + + /* Pipe & plane A info */ + /* Prime the clock */ + if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) { + I915_WRITE(DPLL_A, dev_priv->saveDPLL_A & + ~DPLL_VCO_ENABLE); + DRM_UDELAY(150); + } + I915_WRITE(FPA0, dev_priv->saveFPA0); + I915_WRITE(FPA1, dev_priv->saveFPA1); + /* Actually enable it */ + I915_WRITE(DPLL_A, dev_priv->saveDPLL_A); + DRM_UDELAY(150); + if (IS_I965G(dev)) + I915_WRITE(DPLL_A_MD, dev_priv->saveDPLL_A_MD); + DRM_UDELAY(150); + + /* Restore mode */ + I915_WRITE(HTOTAL_A, dev_priv->saveHTOTAL_A); + I915_WRITE(HBLANK_A, dev_priv->saveHBLANK_A); + I915_WRITE(HSYNC_A, dev_priv->saveHSYNC_A); + I915_WRITE(VTOTAL_A, dev_priv->saveVTOTAL_A); + I915_WRITE(VBLANK_A, dev_priv->saveVBLANK_A); + I915_WRITE(VSYNC_A, dev_priv->saveVSYNC_A); + I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A); + + /* Restore plane info */ + I915_WRITE(DSPASIZE, dev_priv->saveDSPASIZE); + I915_WRITE(DSPAPOS, dev_priv->saveDSPAPOS); + I915_WRITE(PIPEASRC, dev_priv->savePIPEASRC); + I915_WRITE(DSPAADDR, dev_priv->saveDSPAADDR); + I915_WRITE(DSPASTRIDE, dev_priv->saveDSPASTRIDE); + if (IS_I965G(dev)) { + I915_WRITE(DSPASURF, dev_priv->saveDSPASURF); + I915_WRITE(DSPATILEOFF, dev_priv->saveDSPATILEOFF); + } + + I915_WRITE(PIPEACONF, dev_priv->savePIPEACONF); + + i915_restore_palette(dev, PIPE_A); + /* Enable the plane */ + I915_WRITE(DSPACNTR, dev_priv->saveDSPACNTR); + I915_WRITE(DSPAADDR, I915_READ(DSPAADDR)); + + /* Pipe & plane B info */ + if (dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) { + I915_WRITE(DPLL_B, dev_priv->saveDPLL_B & + ~DPLL_VCO_ENABLE); + DRM_UDELAY(150); + } + I915_WRITE(FPB0, dev_priv->saveFPB0); + I915_WRITE(FPB1, dev_priv->saveFPB1); + /* Actually enable it */ + I915_WRITE(DPLL_B, dev_priv->saveDPLL_B); + DRM_UDELAY(150); + if (IS_I965G(dev)) + I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD); + DRM_UDELAY(150); + + /* Restore mode */ + I915_WRITE(HTOTAL_B, dev_priv->saveHTOTAL_B); + I915_WRITE(HBLANK_B, dev_priv->saveHBLANK_B); + I915_WRITE(HSYNC_B, dev_priv->saveHSYNC_B); + I915_WRITE(VTOTAL_B, dev_priv->saveVTOTAL_B); + I915_WRITE(VBLANK_B, dev_priv->saveVBLANK_B); + I915_WRITE(VSYNC_B, dev_priv->saveVSYNC_B); + I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B); + + /* Restore plane info */ + I915_WRITE(DSPBSIZE, dev_priv->saveDSPBSIZE); + I915_WRITE(DSPBPOS, dev_priv->saveDSPBPOS); + I915_WRITE(PIPEBSRC, dev_priv->savePIPEBSRC); + I915_WRITE(DSPBADDR, dev_priv->saveDSPBADDR); + I915_WRITE(DSPBSTRIDE, dev_priv->saveDSPBSTRIDE); + if (IS_I965G(dev)) { + I915_WRITE(DSPBSURF, dev_priv->saveDSPBSURF); + I915_WRITE(DSPBTILEOFF, dev_priv->saveDSPBTILEOFF); + } + + I915_WRITE(PIPEBCONF, dev_priv->savePIPEBCONF); + + i915_restore_palette(dev, PIPE_B); + /* Enable the plane */ + I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR); + I915_WRITE(DSPBADDR, I915_READ(DSPBADDR)); + + /* CRT state */ + I915_WRITE(ADPA, dev_priv->saveADPA); + + /* LVDS state */ + if (IS_I965G(dev)) + I915_WRITE(BLC_PWM_CTL2, dev_priv->saveBLC_PWM_CTL2); + if (IS_MOBILE(dev) && !IS_I830(dev)) + I915_WRITE(LVDS, dev_priv->saveLVDS); + if (!IS_I830(dev) && !IS_845G(dev)) + I915_WRITE(PFIT_CONTROL, dev_priv->savePFIT_CONTROL); + + I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS); + I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL); + I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS); + I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS); + I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR); + I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL); + + /* FIXME: restore TV & SDVO state */ + + /* FBC info */ + I915_WRITE(FBC_CFB_BASE, dev_priv->saveFBC_CFB_BASE); + I915_WRITE(FBC_LL_BASE, dev_priv->saveFBC_LL_BASE); + I915_WRITE(FBC_CONTROL2, dev_priv->saveFBC_CONTROL2); + I915_WRITE(FBC_CONTROL, dev_priv->saveFBC_CONTROL); + + /* VGA state */ + I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL); + I915_WRITE(VGA0, dev_priv->saveVGA0); + I915_WRITE(VGA1, dev_priv->saveVGA1); + I915_WRITE(VGA_PD, dev_priv->saveVGA_PD); + DRM_UDELAY(150); + + /* Clock gating state */ + I915_WRITE (D_STATE, dev_priv->saveD_STATE); + I915_WRITE (CG_2D_DIS, dev_priv->saveCG_2D_DIS); + + /* Cache mode state */ + I915_WRITE (CACHE_MODE_0, dev_priv->saveCACHE_MODE_0 | 0xffff0000); + + /* Memory arbitration state */ + I915_WRITE (MI_ARB_STATE, dev_priv->saveMI_ARB_STATE | 0xffff0000); + + for (i = 0; i < 16; i++) { + I915_WRITE(SWF00 + (i << 2), dev_priv->saveSWF0[i]); + I915_WRITE(SWF10 + (i << 2), dev_priv->saveSWF1[i+7]); + } + for (i = 0; i < 3; i++) + I915_WRITE(SWF30 + (i << 2), dev_priv->saveSWF2[i]); + + i915_restore_vga(dev); + + return 0; +} + diff --git a/drivers/gpu/drm/mga/mga_drv.c b/drivers/gpu/drm/mga/mga_drv.c index 5572939fc7d1..97ee566ef749 100644 --- a/drivers/gpu/drm/mga/mga_drv.c +++ b/drivers/gpu/drm/mga/mga_drv.c @@ -45,15 +45,16 @@ static struct pci_device_id pciidlist[] = { static struct drm_driver driver = { .driver_features = DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | - DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | - DRIVER_IRQ_VBL, + DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED, .dev_priv_size = sizeof(drm_mga_buf_priv_t), .load = mga_driver_load, .unload = mga_driver_unload, .lastclose = mga_driver_lastclose, .dma_quiescent = mga_driver_dma_quiescent, .device_is_agp = mga_driver_device_is_agp, - .vblank_wait = mga_driver_vblank_wait, + .get_vblank_counter = mga_get_vblank_counter, + .enable_vblank = mga_enable_vblank, + .disable_vblank = mga_disable_vblank, .irq_preinstall = mga_driver_irq_preinstall, .irq_postinstall = mga_driver_irq_postinstall, .irq_uninstall = mga_driver_irq_uninstall, @@ -64,20 +65,20 @@ static struct drm_driver driver = { .ioctls = mga_ioctls, .dma_ioctl = mga_dma_buffers, .fops = { - .owner = THIS_MODULE, - .open = drm_open, - .release = drm_release, - .ioctl = drm_ioctl, - .mmap = drm_mmap, - .poll = drm_poll, - .fasync = drm_fasync, + .owner = THIS_MODULE, + .open = drm_open, + .release = drm_release, + .ioctl = drm_ioctl, + .mmap = drm_mmap, + .poll = drm_poll, + .fasync = drm_fasync, #ifdef CONFIG_COMPAT - .compat_ioctl = mga_compat_ioctl, + .compat_ioctl = mga_compat_ioctl, #endif - }, + }, .pci_driver = { - .name = DRIVER_NAME, - .id_table = pciidlist, + .name = DRIVER_NAME, + .id_table = pciidlist, }, .name = DRIVER_NAME, diff --git a/drivers/gpu/drm/mga/mga_drv.h b/drivers/gpu/drm/mga/mga_drv.h index f6ebd24bd587..88257c276eb9 100644 --- a/drivers/gpu/drm/mga/mga_drv.h +++ b/drivers/gpu/drm/mga/mga_drv.h @@ -120,6 +120,7 @@ typedef struct drm_mga_private { u32 clear_cmd; u32 maccess; + atomic_t vbl_received; /**< Number of vblanks received. */ wait_queue_head_t fence_queue; atomic_t last_fence_retired; u32 next_fence_to_post; @@ -181,11 +182,14 @@ extern int mga_warp_install_microcode(drm_mga_private_t * dev_priv); extern int mga_warp_init(drm_mga_private_t * dev_priv); /* mga_irq.c */ +extern int mga_enable_vblank(struct drm_device *dev, int crtc); +extern void mga_disable_vblank(struct drm_device *dev, int crtc); +extern u32 mga_get_vblank_counter(struct drm_device *dev, int crtc); extern int mga_driver_fence_wait(struct drm_device * dev, unsigned int *sequence); extern int mga_driver_vblank_wait(struct drm_device * dev, unsigned int *sequence); extern irqreturn_t mga_driver_irq_handler(DRM_IRQ_ARGS); extern void mga_driver_irq_preinstall(struct drm_device * dev); -extern void mga_driver_irq_postinstall(struct drm_device * dev); +extern int mga_driver_irq_postinstall(struct drm_device *dev); extern void mga_driver_irq_uninstall(struct drm_device * dev); extern long mga_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); diff --git a/drivers/gpu/drm/mga/mga_irq.c b/drivers/gpu/drm/mga/mga_irq.c index 9302cb8f0f83..bab42f41188b 100644 --- a/drivers/gpu/drm/mga/mga_irq.c +++ b/drivers/gpu/drm/mga/mga_irq.c @@ -1,5 +1,6 @@ /* mga_irq.c -- IRQ handling for radeon -*- linux-c -*- - * + */ +/* * Copyright (C) The Weather Channel, Inc. 2002. All Rights Reserved. * * The Weather Channel (TM) funded Tungsten Graphics to develop the @@ -35,6 +36,18 @@ #include "mga_drm.h" #include "mga_drv.h" +u32 mga_get_vblank_counter(struct drm_device *dev, int crtc) +{ + const drm_mga_private_t *const dev_priv = + (drm_mga_private_t *) dev->dev_private; + + if (crtc != 0) + return 0; + + return atomic_read(&dev_priv->vbl_received); +} + + irqreturn_t mga_driver_irq_handler(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; @@ -47,9 +60,8 @@ irqreturn_t mga_driver_irq_handler(DRM_IRQ_ARGS) /* VBLANK interrupt */ if (status & MGA_VLINEPEN) { MGA_WRITE(MGA_ICLEAR, MGA_VLINEICLR); - atomic_inc(&dev->vbl_received); - DRM_WAKEUP(&dev->vbl_queue); - drm_vbl_send_signals(dev); + atomic_inc(&dev_priv->vbl_received); + drm_handle_vblank(dev, 0); handled = 1; } @@ -58,6 +70,7 @@ irqreturn_t mga_driver_irq_handler(DRM_IRQ_ARGS) const u32 prim_start = MGA_READ(MGA_PRIMADDRESS); const u32 prim_end = MGA_READ(MGA_PRIMEND); + MGA_WRITE(MGA_ICLEAR, MGA_SOFTRAPICLR); /* In addition to clearing the interrupt-pending bit, we @@ -72,28 +85,39 @@ irqreturn_t mga_driver_irq_handler(DRM_IRQ_ARGS) handled = 1; } - if (handled) { + if (handled) return IRQ_HANDLED; - } return IRQ_NONE; } -int mga_driver_vblank_wait(struct drm_device * dev, unsigned int *sequence) +int mga_enable_vblank(struct drm_device *dev, int crtc) { - unsigned int cur_vblank; - int ret = 0; + drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private; - /* Assume that the user has missed the current sequence number - * by about a day rather than she wants to wait for years - * using vertical blanks... - */ - DRM_WAIT_ON(ret, dev->vbl_queue, 3 * DRM_HZ, - (((cur_vblank = atomic_read(&dev->vbl_received)) - - *sequence) <= (1 << 23))); + if (crtc != 0) { + DRM_ERROR("tried to enable vblank on non-existent crtc %d\n", + crtc); + return 0; + } - *sequence = cur_vblank; + MGA_WRITE(MGA_IEN, MGA_VLINEIEN | MGA_SOFTRAPEN); + return 0; +} - return ret; + +void mga_disable_vblank(struct drm_device *dev, int crtc) +{ + if (crtc != 0) { + DRM_ERROR("tried to disable vblank on non-existent crtc %d\n", + crtc); + } + + /* Do *NOT* disable the vertical refresh interrupt. MGA doesn't have + * a nice hardware counter that tracks the number of refreshes when + * the interrupt is disabled, and the kernel doesn't know the refresh + * rate to calculate an estimate. + */ + /* MGA_WRITE(MGA_IEN, MGA_VLINEIEN | MGA_SOFTRAPEN); */ } int mga_driver_fence_wait(struct drm_device * dev, unsigned int *sequence) @@ -125,14 +149,22 @@ void mga_driver_irq_preinstall(struct drm_device * dev) MGA_WRITE(MGA_ICLEAR, ~0); } -void mga_driver_irq_postinstall(struct drm_device * dev) +int mga_driver_irq_postinstall(struct drm_device *dev) { drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private; + int ret; + + ret = drm_vblank_init(dev, 1); + if (ret) + return ret; DRM_INIT_WAITQUEUE(&dev_priv->fence_queue); - /* Turn on vertical blank interrupt and soft trap interrupt. */ - MGA_WRITE(MGA_IEN, MGA_VLINEIEN | MGA_SOFTRAPEN); + /* Turn on soft trap interrupt. Vertical blank interrupts are enabled + * in mga_enable_vblank. + */ + MGA_WRITE(MGA_IEN, MGA_SOFTRAPEN); + return 0; } void mga_driver_irq_uninstall(struct drm_device * dev) diff --git a/drivers/gpu/drm/mga/mga_state.c b/drivers/gpu/drm/mga/mga_state.c index d3f8aade07b3..b710fab21cb3 100644 --- a/drivers/gpu/drm/mga/mga_state.c +++ b/drivers/gpu/drm/mga/mga_state.c @@ -1022,7 +1022,7 @@ static int mga_getparam(struct drm_device *dev, void *data, struct drm_file *fil switch (param->param) { case MGA_PARAM_IRQ_NR: - value = dev->irq; + value = drm_dev_to_irq(dev); break; case MGA_PARAM_CARD_TYPE: value = dev_priv->chipset; diff --git a/drivers/gpu/drm/r128/r128_drv.c b/drivers/gpu/drm/r128/r128_drv.c index 6108e7587e12..3265d53ba91f 100644 --- a/drivers/gpu/drm/r128/r128_drv.c +++ b/drivers/gpu/drm/r128/r128_drv.c @@ -43,12 +43,13 @@ static struct pci_device_id pciidlist[] = { static struct drm_driver driver = { .driver_features = DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | DRIVER_SG | - DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | - DRIVER_IRQ_VBL, + DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED, .dev_priv_size = sizeof(drm_r128_buf_priv_t), .preclose = r128_driver_preclose, .lastclose = r128_driver_lastclose, - .vblank_wait = r128_driver_vblank_wait, + .get_vblank_counter = r128_get_vblank_counter, + .enable_vblank = r128_enable_vblank, + .disable_vblank = r128_disable_vblank, .irq_preinstall = r128_driver_irq_preinstall, .irq_postinstall = r128_driver_irq_postinstall, .irq_uninstall = r128_driver_irq_uninstall, @@ -59,21 +60,20 @@ static struct drm_driver driver = { .ioctls = r128_ioctls, .dma_ioctl = r128_cce_buffers, .fops = { - .owner = THIS_MODULE, - .open = drm_open, - .release = drm_release, - .ioctl = drm_ioctl, - .mmap = drm_mmap, - .poll = drm_poll, - .fasync = drm_fasync, + .owner = THIS_MODULE, + .open = drm_open, + .release = drm_release, + .ioctl = drm_ioctl, + .mmap = drm_mmap, + .poll = drm_poll, + .fasync = drm_fasync, #ifdef CONFIG_COMPAT - .compat_ioctl = r128_compat_ioctl, + .compat_ioctl = r128_compat_ioctl, #endif }, - .pci_driver = { - .name = DRIVER_NAME, - .id_table = pciidlist, + .name = DRIVER_NAME, + .id_table = pciidlist, }, .name = DRIVER_NAME, @@ -87,6 +87,7 @@ static struct drm_driver driver = { static int __init r128_init(void) { driver.num_ioctls = r128_max_ioctl; + return drm_init(&driver); } diff --git a/drivers/gpu/drm/r128/r128_drv.h b/drivers/gpu/drm/r128/r128_drv.h index 011105e51ac6..5898b274279d 100644 --- a/drivers/gpu/drm/r128/r128_drv.h +++ b/drivers/gpu/drm/r128/r128_drv.h @@ -29,7 +29,7 @@ * Rickard E. (Rik) Faith <faith@valinux.com> * Kevin E. Martin <martin@valinux.com> * Gareth Hughes <gareth@valinux.com> - * Michel Dänzer <daenzerm@student.ethz.ch> + * Michel D�zer <daenzerm@student.ethz.ch> */ #ifndef __R128_DRV_H__ @@ -97,6 +97,8 @@ typedef struct drm_r128_private { u32 crtc_offset; u32 crtc_offset_cntl; + atomic_t vbl_received; + u32 color_fmt; unsigned int front_offset; unsigned int front_pitch; @@ -149,11 +151,12 @@ extern int r128_wait_ring(drm_r128_private_t * dev_priv, int n); extern int r128_do_cce_idle(drm_r128_private_t * dev_priv); extern int r128_do_cleanup_cce(struct drm_device * dev); -extern int r128_driver_vblank_wait(struct drm_device * dev, unsigned int *sequence); - +extern int r128_enable_vblank(struct drm_device *dev, int crtc); +extern void r128_disable_vblank(struct drm_device *dev, int crtc); +extern u32 r128_get_vblank_counter(struct drm_device *dev, int crtc); extern irqreturn_t r128_driver_irq_handler(DRM_IRQ_ARGS); extern void r128_driver_irq_preinstall(struct drm_device * dev); -extern void r128_driver_irq_postinstall(struct drm_device * dev); +extern int r128_driver_irq_postinstall(struct drm_device *dev); extern void r128_driver_irq_uninstall(struct drm_device * dev); extern void r128_driver_lastclose(struct drm_device * dev); extern void r128_driver_preclose(struct drm_device * dev, diff --git a/drivers/gpu/drm/r128/r128_irq.c b/drivers/gpu/drm/r128/r128_irq.c index c76fdca7662d..d7349012a680 100644 --- a/drivers/gpu/drm/r128/r128_irq.c +++ b/drivers/gpu/drm/r128/r128_irq.c @@ -35,6 +35,16 @@ #include "r128_drm.h" #include "r128_drv.h" +u32 r128_get_vblank_counter(struct drm_device *dev, int crtc) +{ + const drm_r128_private_t *dev_priv = dev->dev_private; + + if (crtc != 0) + return 0; + + return atomic_read(&dev_priv->vbl_received); +} + irqreturn_t r128_driver_irq_handler(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; @@ -46,30 +56,38 @@ irqreturn_t r128_driver_irq_handler(DRM_IRQ_ARGS) /* VBLANK interrupt */ if (status & R128_CRTC_VBLANK_INT) { R128_WRITE(R128_GEN_INT_STATUS, R128_CRTC_VBLANK_INT_AK); - atomic_inc(&dev->vbl_received); - DRM_WAKEUP(&dev->vbl_queue); - drm_vbl_send_signals(dev); + atomic_inc(&dev_priv->vbl_received); + drm_handle_vblank(dev, 0); return IRQ_HANDLED; } return IRQ_NONE; } -int r128_driver_vblank_wait(struct drm_device * dev, unsigned int *sequence) +int r128_enable_vblank(struct drm_device *dev, int crtc) { - unsigned int cur_vblank; - int ret = 0; + drm_r128_private_t *dev_priv = dev->dev_private; - /* Assume that the user has missed the current sequence number - * by about a day rather than she wants to wait for years - * using vertical blanks... - */ - DRM_WAIT_ON(ret, dev->vbl_queue, 3 * DRM_HZ, - (((cur_vblank = atomic_read(&dev->vbl_received)) - - *sequence) <= (1 << 23))); + if (crtc != 0) { + DRM_ERROR("%s: bad crtc %d\n", __func__, crtc); + return -EINVAL; + } - *sequence = cur_vblank; + R128_WRITE(R128_GEN_INT_CNTL, R128_CRTC_VBLANK_INT_EN); + return 0; +} + +void r128_disable_vblank(struct drm_device *dev, int crtc) +{ + if (crtc != 0) + DRM_ERROR("%s: bad crtc %d\n", __func__, crtc); - return ret; + /* + * FIXME: implement proper interrupt disable by using the vblank + * counter register (if available) + * + * R128_WRITE(R128_GEN_INT_CNTL, + * R128_READ(R128_GEN_INT_CNTL) & ~R128_CRTC_VBLANK_INT_EN); + */ } void r128_driver_irq_preinstall(struct drm_device * dev) @@ -82,12 +100,9 @@ void r128_driver_irq_preinstall(struct drm_device * dev) R128_WRITE(R128_GEN_INT_STATUS, R128_CRTC_VBLANK_INT_AK); } -void r128_driver_irq_postinstall(struct drm_device * dev) +int r128_driver_irq_postinstall(struct drm_device *dev) { - drm_r128_private_t *dev_priv = (drm_r128_private_t *) dev->dev_private; - - /* Turn on VBL interrupt */ - R128_WRITE(R128_GEN_INT_CNTL, R128_CRTC_VBLANK_INT_EN); + return drm_vblank_init(dev, 1); } void r128_driver_irq_uninstall(struct drm_device * dev) diff --git a/drivers/gpu/drm/r128/r128_state.c b/drivers/gpu/drm/r128/r128_state.c index 51a9afce7b9b..f7a5b5740764 100644 --- a/drivers/gpu/drm/r128/r128_state.c +++ b/drivers/gpu/drm/r128/r128_state.c @@ -1629,7 +1629,7 @@ static int r128_getparam(struct drm_device *dev, void *data, struct drm_file *fi switch (param->param) { case R128_PARAM_IRQ_NR: - value = dev->irq; + value = drm_dev_to_irq(dev); break; default: return -EINVAL; diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index 248ab4a7d39f..59a2132a8f57 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -71,7 +71,8 @@ static u32 RS690_READ_MCIND(drm_radeon_private_t *dev_priv, int addr) static u32 IGP_READ_MCIND(drm_radeon_private_t *dev_priv, int addr) { - if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) + if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS740)) return RS690_READ_MCIND(dev_priv, addr); else return RS480_READ_MCIND(dev_priv, addr); @@ -82,7 +83,8 @@ u32 radeon_read_fb_location(drm_radeon_private_t *dev_priv) if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) return R500_READ_MCIND(dev_priv, RV515_MC_FB_LOCATION); - else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) + else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS740)) return RS690_READ_MCIND(dev_priv, RS690_MC_FB_LOCATION); else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515) return R500_READ_MCIND(dev_priv, R520_MC_FB_LOCATION); @@ -94,7 +96,8 @@ static void radeon_write_fb_location(drm_radeon_private_t *dev_priv, u32 fb_loc) { if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) R500_WRITE_MCIND(RV515_MC_FB_LOCATION, fb_loc); - else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) + else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS740)) RS690_WRITE_MCIND(RS690_MC_FB_LOCATION, fb_loc); else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515) R500_WRITE_MCIND(R520_MC_FB_LOCATION, fb_loc); @@ -106,7 +109,8 @@ static void radeon_write_agp_location(drm_radeon_private_t *dev_priv, u32 agp_lo { if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) R500_WRITE_MCIND(RV515_MC_AGP_LOCATION, agp_loc); - else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) + else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS740)) RS690_WRITE_MCIND(RS690_MC_AGP_LOCATION, agp_loc); else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515) R500_WRITE_MCIND(R520_MC_AGP_LOCATION, agp_loc); @@ -122,15 +126,17 @@ static void radeon_write_agp_base(drm_radeon_private_t *dev_priv, u64 agp_base) if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) { R500_WRITE_MCIND(RV515_MC_AGP_BASE, agp_base_lo); R500_WRITE_MCIND(RV515_MC_AGP_BASE_2, agp_base_hi); - } else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) { + } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS740)) { RS690_WRITE_MCIND(RS690_MC_AGP_BASE, agp_base_lo); RS690_WRITE_MCIND(RS690_MC_AGP_BASE_2, agp_base_hi); } else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515) { R500_WRITE_MCIND(R520_MC_AGP_BASE, agp_base_lo); R500_WRITE_MCIND(R520_MC_AGP_BASE_2, agp_base_hi); - } else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS480) { + } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS400) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS480)) { RADEON_WRITE(RADEON_AGP_BASE, agp_base_lo); - RADEON_WRITE(RS480_AGP_BASE_2, 0); + RADEON_WRITE(RS480_AGP_BASE_2, agp_base_hi); } else { RADEON_WRITE(RADEON_AGP_BASE, agp_base_lo); if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R200) @@ -347,6 +353,7 @@ static void radeon_cp_load_microcode(drm_radeon_private_t * dev_priv) ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R350) || ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV350) || ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV380) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS400) || ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS480)) { DRM_INFO("Loading R300 Microcode\n"); for (i = 0; i < 256; i++) { @@ -356,6 +363,7 @@ static void radeon_cp_load_microcode(drm_radeon_private_t * dev_priv) R300_cp_microcode[i][0]); } } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R420) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R423) || ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV410)) { DRM_INFO("Loading R400 Microcode\n"); for (i = 0; i < 256; i++) { @@ -364,8 +372,9 @@ static void radeon_cp_load_microcode(drm_radeon_private_t * dev_priv) RADEON_WRITE(RADEON_CP_ME_RAM_DATAL, R420_cp_microcode[i][0]); } - } else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) { - DRM_INFO("Loading RS690 Microcode\n"); + } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS740)) { + DRM_INFO("Loading RS690/RS740 Microcode\n"); for (i = 0; i < 256; i++) { RADEON_WRITE(RADEON_CP_ME_RAM_DATAH, RS690_cp_microcode[i][1]); @@ -626,8 +635,6 @@ static void radeon_cp_init_ring_buffer(struct drm_device * dev, dev_priv->ring.size_l2qw); #endif - /* Start with assuming that writeback doesn't work */ - dev_priv->writeback_works = 0; /* Initialize the scratch register pointer. This will cause * the scratch register values to be written out to memory @@ -646,8 +653,18 @@ static void radeon_cp_init_ring_buffer(struct drm_device * dev, RADEON_WRITE(RADEON_SCRATCH_UMSK, 0x7); /* Turn on bus mastering */ - tmp = RADEON_READ(RADEON_BUS_CNTL) & ~RADEON_BUS_MASTER_DIS; - RADEON_WRITE(RADEON_BUS_CNTL, tmp); + if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS400) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS740)) { + /* rs400, rs690/rs740 */ + tmp = RADEON_READ(RADEON_BUS_CNTL) & ~RS400_BUS_MASTER_DIS; + RADEON_WRITE(RADEON_BUS_CNTL, tmp); + } else if (!(((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV380) || + ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R423))) { + /* r1xx, r2xx, r300, r(v)350, r420/r481, rs480 */ + tmp = RADEON_READ(RADEON_BUS_CNTL) & ~RADEON_BUS_MASTER_DIS; + RADEON_WRITE(RADEON_BUS_CNTL, tmp); + } /* PCIE cards appears to not need this */ dev_priv->sarea_priv->last_frame = dev_priv->scratch[0] = 0; RADEON_WRITE(RADEON_LAST_FRAME_REG, dev_priv->sarea_priv->last_frame); @@ -674,6 +691,9 @@ static void radeon_test_writeback(drm_radeon_private_t * dev_priv) { u32 tmp; + /* Start with assuming that writeback doesn't work */ + dev_priv->writeback_works = 0; + /* Writeback doesn't seem to work everywhere, test it here and possibly * enable it if it appears to work */ @@ -719,7 +739,8 @@ static void radeon_set_igpgart(drm_radeon_private_t * dev_priv, int on) dev_priv->gart_size); temp = IGP_READ_MCIND(dev_priv, RS480_MC_MISC_CNTL); - if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) + if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS740)) IGP_WRITE_MCIND(RS480_MC_MISC_CNTL, (RS480_GART_INDEX_REG_EN | RS690_BLOCK_GFX_D3_EN)); else @@ -812,6 +833,7 @@ static void radeon_set_pcigart(drm_radeon_private_t * dev_priv, int on) u32 tmp; if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS740) || (dev_priv->flags & RADEON_IS_IGPGART)) { radeon_set_igpgart(dev_priv, on); return; @@ -1286,7 +1308,7 @@ static int radeon_do_resume_cp(struct drm_device * dev) radeon_cp_init_ring_buffer(dev, dev_priv); radeon_do_engine_reset(dev); - radeon_enable_interrupt(dev); + radeon_irq_set_state(dev, RADEON_SW_INT_ENABLE, 1); DRM_DEBUG("radeon_do_resume_cp() complete\n"); @@ -1708,6 +1730,7 @@ int radeon_driver_load(struct drm_device *dev, unsigned long flags) case CHIP_R300: case CHIP_R350: case CHIP_R420: + case CHIP_R423: case CHIP_RV410: case CHIP_RV515: case CHIP_R520: diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index 637bd7faf132..71af746a4e47 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -52,6 +52,28 @@ static int dri_library_name(struct drm_device *dev, char *buf) "r300")); } +static int radeon_suspend(struct drm_device *dev, pm_message_t state) +{ + drm_radeon_private_t *dev_priv = dev->dev_private; + + /* Disable *all* interrupts */ + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RS690) + RADEON_WRITE(R500_DxMODE_INT_MASK, 0); + RADEON_WRITE(RADEON_GEN_INT_CNTL, 0); + return 0; +} + +static int radeon_resume(struct drm_device *dev) +{ + drm_radeon_private_t *dev_priv = dev->dev_private; + + /* Restore interrupt registers */ + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RS690) + RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg); + RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg); + return 0; +} + static struct pci_device_id pciidlist[] = { radeon_PCI_IDS }; @@ -59,8 +81,7 @@ static struct pci_device_id pciidlist[] = { static struct drm_driver driver = { .driver_features = DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | DRIVER_SG | - DRIVER_HAVE_IRQ | DRIVER_HAVE_DMA | DRIVER_IRQ_SHARED | - DRIVER_IRQ_VBL | DRIVER_IRQ_VBL2, + DRIVER_HAVE_IRQ | DRIVER_HAVE_DMA | DRIVER_IRQ_SHARED, .dev_priv_size = sizeof(drm_radeon_buf_priv_t), .load = radeon_driver_load, .firstopen = radeon_driver_firstopen, @@ -69,8 +90,11 @@ static struct drm_driver driver = { .postclose = radeon_driver_postclose, .lastclose = radeon_driver_lastclose, .unload = radeon_driver_unload, - .vblank_wait = radeon_driver_vblank_wait, - .vblank_wait2 = radeon_driver_vblank_wait2, + .suspend = radeon_suspend, + .resume = radeon_resume, + .get_vblank_counter = radeon_get_vblank_counter, + .enable_vblank = radeon_enable_vblank, + .disable_vblank = radeon_disable_vblank, .dri_library_name = dri_library_name, .irq_preinstall = radeon_driver_irq_preinstall, .irq_postinstall = radeon_driver_irq_postinstall, diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h index 099381693175..4dbb813910c3 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.h +++ b/drivers/gpu/drm/radeon/radeon_drv.h @@ -122,9 +122,12 @@ enum radeon_family { CHIP_RV350, CHIP_RV380, CHIP_R420, + CHIP_R423, CHIP_RV410, + CHIP_RS400, CHIP_RS480, CHIP_RS690, + CHIP_RS740, CHIP_RV515, CHIP_R520, CHIP_RV530, @@ -378,17 +381,17 @@ extern void radeon_mem_release(struct drm_file *file_priv, struct mem_block *heap); /* radeon_irq.c */ +extern void radeon_irq_set_state(struct drm_device *dev, u32 mask, int state); extern int radeon_irq_emit(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int radeon_irq_wait(struct drm_device *dev, void *data, struct drm_file *file_priv); extern void radeon_do_release(struct drm_device * dev); -extern int radeon_driver_vblank_wait(struct drm_device * dev, - unsigned int *sequence); -extern int radeon_driver_vblank_wait2(struct drm_device * dev, - unsigned int *sequence); +extern u32 radeon_get_vblank_counter(struct drm_device *dev, int crtc); +extern int radeon_enable_vblank(struct drm_device *dev, int crtc); +extern void radeon_disable_vblank(struct drm_device *dev, int crtc); extern irqreturn_t radeon_driver_irq_handler(DRM_IRQ_ARGS); extern void radeon_driver_irq_preinstall(struct drm_device * dev); -extern void radeon_driver_irq_postinstall(struct drm_device * dev); +extern int radeon_driver_irq_postinstall(struct drm_device *dev); extern void radeon_driver_irq_uninstall(struct drm_device * dev); extern void radeon_enable_interrupt(struct drm_device *dev); extern int radeon_vblank_crtc_get(struct drm_device *dev); @@ -397,19 +400,22 @@ extern int radeon_vblank_crtc_set(struct drm_device *dev, int64_t value); extern int radeon_driver_load(struct drm_device *dev, unsigned long flags); extern int radeon_driver_unload(struct drm_device *dev); extern int radeon_driver_firstopen(struct drm_device *dev); -extern void radeon_driver_preclose(struct drm_device * dev, struct drm_file *file_priv); -extern void radeon_driver_postclose(struct drm_device * dev, struct drm_file * filp); +extern void radeon_driver_preclose(struct drm_device *dev, + struct drm_file *file_priv); +extern void radeon_driver_postclose(struct drm_device *dev, + struct drm_file *file_priv); extern void radeon_driver_lastclose(struct drm_device * dev); -extern int radeon_driver_open(struct drm_device * dev, struct drm_file * filp_priv); +extern int radeon_driver_open(struct drm_device *dev, + struct drm_file *file_priv); extern long radeon_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); /* r300_cmdbuf.c */ extern void r300_init_reg_flags(struct drm_device *dev); -extern int r300_do_cp_cmdbuf(struct drm_device * dev, +extern int r300_do_cp_cmdbuf(struct drm_device *dev, struct drm_file *file_priv, - drm_radeon_kcmd_buffer_t * cmdbuf); + drm_radeon_kcmd_buffer_t *cmdbuf); /* Flags for stats.boxes */ @@ -434,8 +440,31 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, # define RADEON_SCISSOR_1_ENABLE (1 << 29) # define RADEON_SCISSOR_2_ENABLE (1 << 30) +/* + * PCIE radeons (rv370/rv380, rv410, r423/r430/r480, r5xx) + * don't have an explicit bus mastering disable bit. It's handled + * by the PCI D-states. PMI_BM_DIS disables D-state bus master + * handling, not bus mastering itself. + */ #define RADEON_BUS_CNTL 0x0030 +/* r1xx, r2xx, r300, r(v)350, r420/r481, rs480 */ # define RADEON_BUS_MASTER_DIS (1 << 6) +/* rs400, rs690/rs740 */ +# define RS400_BUS_MASTER_DIS (1 << 14) +# define RS400_MSI_REARM (1 << 20) +/* see RS480_MSI_REARM in AIC_CNTL for rs480 */ + +#define RADEON_BUS_CNTL1 0x0034 +# define RADEON_PMI_BM_DIS (1 << 2) +# define RADEON_PMI_INT_DIS (1 << 3) + +#define RV370_BUS_CNTL 0x004c +# define RV370_PMI_BM_DIS (1 << 5) +# define RV370_PMI_INT_DIS (1 << 6) + +#define RADEON_MSI_REARM_EN 0x0160 +/* rv370/rv380, rv410, r423/r430/r480, r5xx */ +# define RV370_MSI_REARM_EN (1 << 0) #define RADEON_CLOCK_CNTL_DATA 0x000c # define RADEON_PLL_WR_EN (1 << 7) @@ -623,6 +652,7 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, # define RADEON_SW_INT_TEST (1 << 25) # define RADEON_SW_INT_TEST_ACK (1 << 25) # define RADEON_SW_INT_FIRE (1 << 26) +# define R500_DISPLAY_INT_STATUS (1 << 0) #define RADEON_HOST_PATH_CNTL 0x0130 # define RADEON_HDP_SOFT_RESET (1 << 26) @@ -907,6 +937,7 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RADEON_AIC_CNTL 0x01d0 # define RADEON_PCIGART_TRANSLATE_EN (1 << 0) +# define RS480_MSI_REARM (1 << 3) #define RADEON_AIC_STAT 0x01d4 #define RADEON_AIC_PT_BASE 0x01d8 #define RADEON_AIC_LO_ADDR 0x01dc @@ -1116,6 +1147,9 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define R200_VAP_PVS_CNTL_1 0x22D0 +#define RADEON_CRTC_CRNT_FRAME 0x0214 +#define RADEON_CRTC2_CRNT_FRAME 0x0314 + #define R500_D1CRTC_STATUS 0x609c #define R500_D2CRTC_STATUS 0x689c #define R500_CRTC_V_BLANK (1<<0) @@ -1200,7 +1234,8 @@ do { \ #define IGP_WRITE_MCIND(addr, val) \ do { \ - if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) \ + if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) || \ + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS740)) \ RS690_WRITE_MCIND(addr, val); \ else \ RS480_WRITE_MCIND(addr, val); \ diff --git a/drivers/gpu/drm/radeon/radeon_irq.c b/drivers/gpu/drm/radeon/radeon_irq.c index ee40d197deb7..5079f7054a2f 100644 --- a/drivers/gpu/drm/radeon/radeon_irq.c +++ b/drivers/gpu/drm/radeon/radeon_irq.c @@ -27,7 +27,7 @@ * * Authors: * Keith Whitwell <keith@tungstengraphics.com> - * Michel Dänzer <michel@daenzer.net> + * Michel D�zer <michel@daenzer.net> */ #include "drmP.h" @@ -35,12 +35,128 @@ #include "radeon_drm.h" #include "radeon_drv.h" -static __inline__ u32 radeon_acknowledge_irqs(drm_radeon_private_t * dev_priv, - u32 mask) +void radeon_irq_set_state(struct drm_device *dev, u32 mask, int state) { - u32 irqs = RADEON_READ(RADEON_GEN_INT_STATUS) & mask; + drm_radeon_private_t *dev_priv = dev->dev_private; + + if (state) + dev_priv->irq_enable_reg |= mask; + else + dev_priv->irq_enable_reg &= ~mask; + + RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg); +} + +static void r500_vbl_irq_set_state(struct drm_device *dev, u32 mask, int state) +{ + drm_radeon_private_t *dev_priv = dev->dev_private; + + if (state) + dev_priv->r500_disp_irq_reg |= mask; + else + dev_priv->r500_disp_irq_reg &= ~mask; + + RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg); +} + +int radeon_enable_vblank(struct drm_device *dev, int crtc) +{ + drm_radeon_private_t *dev_priv = dev->dev_private; + + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RS690) { + switch (crtc) { + case 0: + r500_vbl_irq_set_state(dev, R500_D1MODE_INT_MASK, 1); + break; + case 1: + r500_vbl_irq_set_state(dev, R500_D2MODE_INT_MASK, 1); + break; + default: + DRM_ERROR("tried to enable vblank on non-existent crtc %d\n", + crtc); + return EINVAL; + } + } else { + switch (crtc) { + case 0: + radeon_irq_set_state(dev, RADEON_CRTC_VBLANK_MASK, 1); + break; + case 1: + radeon_irq_set_state(dev, RADEON_CRTC2_VBLANK_MASK, 1); + break; + default: + DRM_ERROR("tried to enable vblank on non-existent crtc %d\n", + crtc); + return EINVAL; + } + } + + return 0; +} + +void radeon_disable_vblank(struct drm_device *dev, int crtc) +{ + drm_radeon_private_t *dev_priv = dev->dev_private; + + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RS690) { + switch (crtc) { + case 0: + r500_vbl_irq_set_state(dev, R500_D1MODE_INT_MASK, 0); + break; + case 1: + r500_vbl_irq_set_state(dev, R500_D2MODE_INT_MASK, 0); + break; + default: + DRM_ERROR("tried to enable vblank on non-existent crtc %d\n", + crtc); + break; + } + } else { + switch (crtc) { + case 0: + radeon_irq_set_state(dev, RADEON_CRTC_VBLANK_MASK, 0); + break; + case 1: + radeon_irq_set_state(dev, RADEON_CRTC2_VBLANK_MASK, 0); + break; + default: + DRM_ERROR("tried to enable vblank on non-existent crtc %d\n", + crtc); + break; + } + } +} + +static inline u32 radeon_acknowledge_irqs(drm_radeon_private_t *dev_priv, u32 *r500_disp_int) +{ + u32 irqs = RADEON_READ(RADEON_GEN_INT_STATUS); + u32 irq_mask = RADEON_SW_INT_TEST; + + *r500_disp_int = 0; + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RS690) { + /* vbl interrupts in a different place */ + + if (irqs & R500_DISPLAY_INT_STATUS) { + /* if a display interrupt */ + u32 disp_irq; + + disp_irq = RADEON_READ(R500_DISP_INTERRUPT_STATUS); + + *r500_disp_int = disp_irq; + if (disp_irq & R500_D1_VBLANK_INTERRUPT) + RADEON_WRITE(R500_D1MODE_VBLANK_STATUS, R500_VBLANK_ACK); + if (disp_irq & R500_D2_VBLANK_INTERRUPT) + RADEON_WRITE(R500_D2MODE_VBLANK_STATUS, R500_VBLANK_ACK); + } + irq_mask |= R500_DISPLAY_INT_STATUS; + } else + irq_mask |= RADEON_CRTC_VBLANK_STAT | RADEON_CRTC2_VBLANK_STAT; + + irqs &= irq_mask; + if (irqs) RADEON_WRITE(RADEON_GEN_INT_STATUS, irqs); + return irqs; } @@ -68,44 +184,33 @@ irqreturn_t radeon_driver_irq_handler(DRM_IRQ_ARGS) drm_radeon_private_t *dev_priv = (drm_radeon_private_t *) dev->dev_private; u32 stat; + u32 r500_disp_int; /* Only consider the bits we're interested in - others could be used * outside the DRM */ - stat = radeon_acknowledge_irqs(dev_priv, (RADEON_SW_INT_TEST_ACK | - RADEON_CRTC_VBLANK_STAT | - RADEON_CRTC2_VBLANK_STAT)); + stat = radeon_acknowledge_irqs(dev_priv, &r500_disp_int); if (!stat) return IRQ_NONE; stat &= dev_priv->irq_enable_reg; /* SW interrupt */ - if (stat & RADEON_SW_INT_TEST) { + if (stat & RADEON_SW_INT_TEST) DRM_WAKEUP(&dev_priv->swi_queue); - } /* VBLANK interrupt */ - if (stat & (RADEON_CRTC_VBLANK_STAT|RADEON_CRTC2_VBLANK_STAT)) { - int vblank_crtc = dev_priv->vblank_crtc; - - if ((vblank_crtc & - (DRM_RADEON_VBLANK_CRTC1 | DRM_RADEON_VBLANK_CRTC2)) == - (DRM_RADEON_VBLANK_CRTC1 | DRM_RADEON_VBLANK_CRTC2)) { - if (stat & RADEON_CRTC_VBLANK_STAT) - atomic_inc(&dev->vbl_received); - if (stat & RADEON_CRTC2_VBLANK_STAT) - atomic_inc(&dev->vbl_received2); - } else if (((stat & RADEON_CRTC_VBLANK_STAT) && - (vblank_crtc & DRM_RADEON_VBLANK_CRTC1)) || - ((stat & RADEON_CRTC2_VBLANK_STAT) && - (vblank_crtc & DRM_RADEON_VBLANK_CRTC2))) - atomic_inc(&dev->vbl_received); - - DRM_WAKEUP(&dev->vbl_queue); - drm_vbl_send_signals(dev); + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RS690) { + if (r500_disp_int & R500_D1_VBLANK_INTERRUPT) + drm_handle_vblank(dev, 0); + if (r500_disp_int & R500_D2_VBLANK_INTERRUPT) + drm_handle_vblank(dev, 1); + } else { + if (stat & RADEON_CRTC_VBLANK_STAT) + drm_handle_vblank(dev, 0); + if (stat & RADEON_CRTC2_VBLANK_STAT) + drm_handle_vblank(dev, 1); } - return IRQ_HANDLED; } @@ -144,54 +249,31 @@ static int radeon_wait_irq(struct drm_device * dev, int swi_nr) return ret; } -static int radeon_driver_vblank_do_wait(struct drm_device * dev, - unsigned int *sequence, int crtc) +u32 radeon_get_vblank_counter(struct drm_device *dev, int crtc) { - drm_radeon_private_t *dev_priv = - (drm_radeon_private_t *) dev->dev_private; - unsigned int cur_vblank; - int ret = 0; - int ack = 0; - atomic_t *counter; + drm_radeon_private_t *dev_priv = dev->dev_private; + if (!dev_priv) { DRM_ERROR("called with no initialization\n"); return -EINVAL; } - if (crtc == DRM_RADEON_VBLANK_CRTC1) { - counter = &dev->vbl_received; - ack |= RADEON_CRTC_VBLANK_STAT; - } else if (crtc == DRM_RADEON_VBLANK_CRTC2) { - counter = &dev->vbl_received2; - ack |= RADEON_CRTC2_VBLANK_STAT; - } else + if (crtc < 0 || crtc > 1) { + DRM_ERROR("Invalid crtc %d\n", crtc); return -EINVAL; + } - radeon_acknowledge_irqs(dev_priv, ack); - - dev_priv->stats.boxes |= RADEON_BOX_WAIT_IDLE; - - /* Assume that the user has missed the current sequence number - * by about a day rather than she wants to wait for years - * using vertical blanks... - */ - DRM_WAIT_ON(ret, dev->vbl_queue, 3 * DRM_HZ, - (((cur_vblank = atomic_read(counter)) - - *sequence) <= (1 << 23))); - - *sequence = cur_vblank; - - return ret; -} - -int radeon_driver_vblank_wait(struct drm_device *dev, unsigned int *sequence) -{ - return radeon_driver_vblank_do_wait(dev, sequence, DRM_RADEON_VBLANK_CRTC1); -} - -int radeon_driver_vblank_wait2(struct drm_device *dev, unsigned int *sequence) -{ - return radeon_driver_vblank_do_wait(dev, sequence, DRM_RADEON_VBLANK_CRTC2); + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RS690) { + if (crtc == 0) + return RADEON_READ(R500_D1CRTC_FRAME_COUNT); + else + return RADEON_READ(R500_D2CRTC_FRAME_COUNT); + } else { + if (crtc == 0) + return RADEON_READ(RADEON_CRTC_CRNT_FRAME); + else + return RADEON_READ(RADEON_CRTC2_CRNT_FRAME); + } } /* Needs the lock as it touches the ring. @@ -234,46 +316,41 @@ int radeon_irq_wait(struct drm_device *dev, void *data, struct drm_file *file_pr return radeon_wait_irq(dev, irqwait->irq_seq); } -void radeon_enable_interrupt(struct drm_device *dev) -{ - drm_radeon_private_t *dev_priv = (drm_radeon_private_t *) dev->dev_private; - - dev_priv->irq_enable_reg = RADEON_SW_INT_ENABLE; - if (dev_priv->vblank_crtc & DRM_RADEON_VBLANK_CRTC1) - dev_priv->irq_enable_reg |= RADEON_CRTC_VBLANK_MASK; - - if (dev_priv->vblank_crtc & DRM_RADEON_VBLANK_CRTC2) - dev_priv->irq_enable_reg |= RADEON_CRTC2_VBLANK_MASK; - - RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg); - dev_priv->irq_enabled = 1; -} - /* drm_dma.h hooks */ void radeon_driver_irq_preinstall(struct drm_device * dev) { drm_radeon_private_t *dev_priv = (drm_radeon_private_t *) dev->dev_private; + u32 dummy; /* Disable *all* interrupts */ + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RS690) + RADEON_WRITE(R500_DxMODE_INT_MASK, 0); RADEON_WRITE(RADEON_GEN_INT_CNTL, 0); /* Clear bits if they're already high */ - radeon_acknowledge_irqs(dev_priv, (RADEON_SW_INT_TEST_ACK | - RADEON_CRTC_VBLANK_STAT | - RADEON_CRTC2_VBLANK_STAT)); + radeon_acknowledge_irqs(dev_priv, &dummy); } -void radeon_driver_irq_postinstall(struct drm_device * dev) +int radeon_driver_irq_postinstall(struct drm_device *dev) { drm_radeon_private_t *dev_priv = (drm_radeon_private_t *) dev->dev_private; + int ret; atomic_set(&dev_priv->swi_emitted, 0); DRM_INIT_WAITQUEUE(&dev_priv->swi_queue); - radeon_enable_interrupt(dev); + ret = drm_vblank_init(dev, 2); + if (ret) + return ret; + + dev->max_vblank_count = 0x001fffff; + + radeon_irq_set_state(dev, RADEON_SW_INT_ENABLE, 1); + + return 0; } void radeon_driver_irq_uninstall(struct drm_device * dev) @@ -285,6 +362,8 @@ void radeon_driver_irq_uninstall(struct drm_device * dev) dev_priv->irq_enabled = 0; + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RS690) + RADEON_WRITE(R500_DxMODE_INT_MASK, 0); /* Disable *all* interrupts */ RADEON_WRITE(RADEON_GEN_INT_CNTL, 0); } @@ -293,18 +372,8 @@ void radeon_driver_irq_uninstall(struct drm_device * dev) int radeon_vblank_crtc_get(struct drm_device *dev) { drm_radeon_private_t *dev_priv = (drm_radeon_private_t *) dev->dev_private; - u32 flag; - u32 value; - - flag = RADEON_READ(RADEON_GEN_INT_CNTL); - value = 0; - - if (flag & RADEON_CRTC_VBLANK_MASK) - value |= DRM_RADEON_VBLANK_CRTC1; - if (flag & RADEON_CRTC2_VBLANK_MASK) - value |= DRM_RADEON_VBLANK_CRTC2; - return value; + return dev_priv->vblank_crtc; } int radeon_vblank_crtc_set(struct drm_device *dev, int64_t value) @@ -315,6 +384,5 @@ int radeon_vblank_crtc_set(struct drm_device *dev, int64_t value) return -EINVAL; } dev_priv->vblank_crtc = (unsigned int)value; - radeon_enable_interrupt(dev); return 0; } diff --git a/drivers/gpu/drm/radeon/radeon_state.c b/drivers/gpu/drm/radeon/radeon_state.c index 11c146b49211..5d7153fcc7b0 100644 --- a/drivers/gpu/drm/radeon/radeon_state.c +++ b/drivers/gpu/drm/radeon/radeon_state.c @@ -2997,7 +2997,7 @@ static int radeon_cp_getparam(struct drm_device *dev, void *data, struct drm_fil value = GET_SCRATCH(2); break; case RADEON_PARAM_IRQ_NR: - value = dev->irq; + value = drm_dev_to_irq(dev); break; case RADEON_PARAM_GART_BASE: value = dev_priv->gart_vm_start; diff --git a/drivers/gpu/drm/sis/sis_mm.c b/drivers/gpu/drm/sis/sis_mm.c index b3878770fce1..af22111397d8 100644 --- a/drivers/gpu/drm/sis/sis_mm.c +++ b/drivers/gpu/drm/sis/sis_mm.c @@ -41,7 +41,7 @@ #define AGP_TYPE 1 -#if defined(CONFIG_FB_SIS) +#if defined(CONFIG_FB_SIS) || defined(CONFIG_FB_SIS_MODULE) /* fb management via fb device */ #define SIS_MM_ALIGN_SHIFT 0 @@ -57,7 +57,7 @@ static void *sis_sman_mm_allocate(void *private, unsigned long size, if (req.size == 0) return NULL; else - return (void *)~req.offset; + return (void *)(unsigned long)~req.offset; } static void sis_sman_mm_free(void *private, void *ref) @@ -75,12 +75,12 @@ static unsigned long sis_sman_mm_offset(void *private, void *ref) return ~((unsigned long)ref); } -#else /* CONFIG_FB_SIS */ +#else /* CONFIG_FB_SIS[_MODULE] */ #define SIS_MM_ALIGN_SHIFT 4 #define SIS_MM_ALIGN_MASK ( (1 << SIS_MM_ALIGN_SHIFT) - 1) -#endif /* CONFIG_FB_SIS */ +#endif /* CONFIG_FB_SIS[_MODULE] */ static int sis_fb_init(struct drm_device *dev, void *data, struct drm_file *file_priv) { @@ -89,7 +89,7 @@ static int sis_fb_init(struct drm_device *dev, void *data, struct drm_file *file int ret; mutex_lock(&dev->struct_mutex); -#if defined(CONFIG_FB_SIS) +#if defined(CONFIG_FB_SIS) || defined(CONFIG_FB_SIS_MODULE) { struct drm_sman_mm sman_mm; sman_mm.private = (void *)0xFFFFFFFF; diff --git a/drivers/gpu/drm/via/via_drv.c b/drivers/gpu/drm/via/via_drv.c index 80c01cdfa37d..0993b441fc42 100644 --- a/drivers/gpu/drm/via/via_drv.c +++ b/drivers/gpu/drm/via/via_drv.c @@ -40,11 +40,13 @@ static struct pci_device_id pciidlist[] = { static struct drm_driver driver = { .driver_features = DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_HAVE_IRQ | - DRIVER_IRQ_SHARED | DRIVER_IRQ_VBL, + DRIVER_IRQ_SHARED, .load = via_driver_load, .unload = via_driver_unload, .context_dtor = via_final_context, - .vblank_wait = via_driver_vblank_wait, + .get_vblank_counter = via_get_vblank_counter, + .enable_vblank = via_enable_vblank, + .disable_vblank = via_disable_vblank, .irq_preinstall = via_driver_irq_preinstall, .irq_postinstall = via_driver_irq_postinstall, .irq_uninstall = via_driver_irq_uninstall, @@ -59,17 +61,17 @@ static struct drm_driver driver = { .get_reg_ofs = drm_core_get_reg_ofs, .ioctls = via_ioctls, .fops = { - .owner = THIS_MODULE, - .open = drm_open, - .release = drm_release, - .ioctl = drm_ioctl, - .mmap = drm_mmap, - .poll = drm_poll, - .fasync = drm_fasync, - }, + .owner = THIS_MODULE, + .open = drm_open, + .release = drm_release, + .ioctl = drm_ioctl, + .mmap = drm_mmap, + .poll = drm_poll, + .fasync = drm_fasync, + }, .pci_driver = { - .name = DRIVER_NAME, - .id_table = pciidlist, + .name = DRIVER_NAME, + .id_table = pciidlist, }, .name = DRIVER_NAME, diff --git a/drivers/gpu/drm/via/via_drv.h b/drivers/gpu/drm/via/via_drv.h index 2daae81874cd..cafcb844a223 100644 --- a/drivers/gpu/drm/via/via_drv.h +++ b/drivers/gpu/drm/via/via_drv.h @@ -75,6 +75,7 @@ typedef struct drm_via_private { struct timeval last_vblank; int last_vblank_valid; unsigned usec_per_vblank; + atomic_t vbl_received; drm_via_state_t hc_state; char pci_buf[VIA_PCI_BUF_SIZE]; const uint32_t *fire_offsets[VIA_FIRE_BUF_SIZE]; @@ -130,21 +131,24 @@ extern int via_init_context(struct drm_device * dev, int context); extern int via_final_context(struct drm_device * dev, int context); extern int via_do_cleanup_map(struct drm_device * dev); -extern int via_driver_vblank_wait(struct drm_device * dev, unsigned int *sequence); +extern u32 via_get_vblank_counter(struct drm_device *dev, int crtc); +extern int via_enable_vblank(struct drm_device *dev, int crtc); +extern void via_disable_vblank(struct drm_device *dev, int crtc); extern irqreturn_t via_driver_irq_handler(DRM_IRQ_ARGS); extern void via_driver_irq_preinstall(struct drm_device * dev); -extern void via_driver_irq_postinstall(struct drm_device * dev); +extern int via_driver_irq_postinstall(struct drm_device *dev); extern void via_driver_irq_uninstall(struct drm_device * dev); extern int via_dma_cleanup(struct drm_device * dev); extern void via_init_command_verifier(void); extern int via_driver_dma_quiescent(struct drm_device * dev); -extern void via_init_futex(drm_via_private_t * dev_priv); -extern void via_cleanup_futex(drm_via_private_t * dev_priv); -extern void via_release_futex(drm_via_private_t * dev_priv, int context); +extern void via_init_futex(drm_via_private_t *dev_priv); +extern void via_cleanup_futex(drm_via_private_t *dev_priv); +extern void via_release_futex(drm_via_private_t *dev_priv, int context); -extern void via_reclaim_buffers_locked(struct drm_device *dev, struct drm_file *file_priv); +extern void via_reclaim_buffers_locked(struct drm_device *dev, + struct drm_file *file_priv); extern void via_lastclose(struct drm_device *dev); extern void via_dmablit_handler(struct drm_device *dev, int engine, int from_irq); diff --git a/drivers/gpu/drm/via/via_irq.c b/drivers/gpu/drm/via/via_irq.c index c6bb978a1106..665d319b927b 100644 --- a/drivers/gpu/drm/via/via_irq.c +++ b/drivers/gpu/drm/via/via_irq.c @@ -43,7 +43,7 @@ #define VIA_REG_INTERRUPT 0x200 /* VIA_REG_INTERRUPT */ -#define VIA_IRQ_GLOBAL (1 << 31) +#define VIA_IRQ_GLOBAL (1 << 31) #define VIA_IRQ_VBLANK_ENABLE (1 << 19) #define VIA_IRQ_VBLANK_PENDING (1 << 3) #define VIA_IRQ_HQV0_ENABLE (1 << 11) @@ -68,16 +68,15 @@ static maskarray_t via_pro_group_a_irqs[] = { {VIA_IRQ_HQV0_ENABLE, VIA_IRQ_HQV0_PENDING, 0x000003D0, 0x00008010, - 0x00000000}, + 0x00000000 }, {VIA_IRQ_HQV1_ENABLE, VIA_IRQ_HQV1_PENDING, 0x000013D0, 0x00008010, - 0x00000000}, + 0x00000000 }, {VIA_IRQ_DMA0_TD_ENABLE, VIA_IRQ_DMA0_TD_PENDING, VIA_PCI_DMA_CSR0, VIA_DMA_CSR_TA | VIA_DMA_CSR_TD, 0x00000008}, {VIA_IRQ_DMA1_TD_ENABLE, VIA_IRQ_DMA1_TD_PENDING, VIA_PCI_DMA_CSR1, VIA_DMA_CSR_TA | VIA_DMA_CSR_TD, 0x00000008}, }; -static int via_num_pro_group_a = - sizeof(via_pro_group_a_irqs) / sizeof(maskarray_t); +static int via_num_pro_group_a = ARRAY_SIZE(via_pro_group_a_irqs); static int via_irqmap_pro_group_a[] = {0, 1, -1, 2, -1, 3}; static maskarray_t via_unichrome_irqs[] = { @@ -86,14 +85,24 @@ static maskarray_t via_unichrome_irqs[] = { {VIA_IRQ_DMA1_TD_ENABLE, VIA_IRQ_DMA1_TD_PENDING, VIA_PCI_DMA_CSR1, VIA_DMA_CSR_TA | VIA_DMA_CSR_TD, 0x00000008} }; -static int via_num_unichrome = sizeof(via_unichrome_irqs) / sizeof(maskarray_t); +static int via_num_unichrome = ARRAY_SIZE(via_unichrome_irqs); static int via_irqmap_unichrome[] = {-1, -1, -1, 0, -1, 1}; + static unsigned time_diff(struct timeval *now, struct timeval *then) { return (now->tv_usec >= then->tv_usec) ? - now->tv_usec - then->tv_usec : - 1000000 - (then->tv_usec - now->tv_usec); + now->tv_usec - then->tv_usec : + 1000000 - (then->tv_usec - now->tv_usec); +} + +u32 via_get_vblank_counter(struct drm_device *dev, int crtc) +{ + drm_via_private_t *dev_priv = dev->dev_private; + if (crtc != 0) + return 0; + + return atomic_read(&dev_priv->vbl_received); } irqreturn_t via_driver_irq_handler(DRM_IRQ_ARGS) @@ -108,23 +117,22 @@ irqreturn_t via_driver_irq_handler(DRM_IRQ_ARGS) status = VIA_READ(VIA_REG_INTERRUPT); if (status & VIA_IRQ_VBLANK_PENDING) { - atomic_inc(&dev->vbl_received); - if (!(atomic_read(&dev->vbl_received) & 0x0F)) { + atomic_inc(&dev_priv->vbl_received); + if (!(atomic_read(&dev_priv->vbl_received) & 0x0F)) { do_gettimeofday(&cur_vblank); if (dev_priv->last_vblank_valid) { dev_priv->usec_per_vblank = - time_diff(&cur_vblank, - &dev_priv->last_vblank) >> 4; + time_diff(&cur_vblank, + &dev_priv->last_vblank) >> 4; } dev_priv->last_vblank = cur_vblank; dev_priv->last_vblank_valid = 1; } - if (!(atomic_read(&dev->vbl_received) & 0xFF)) { + if (!(atomic_read(&dev_priv->vbl_received) & 0xFF)) { DRM_DEBUG("US per vblank is: %u\n", dev_priv->usec_per_vblank); } - DRM_WAKEUP(&dev->vbl_queue); - drm_vbl_send_signals(dev); + drm_handle_vblank(dev, 0); handled = 1; } @@ -145,6 +153,7 @@ irqreturn_t via_driver_irq_handler(DRM_IRQ_ARGS) /* Acknowlege interrupts */ VIA_WRITE(VIA_REG_INTERRUPT, status); + if (handled) return IRQ_HANDLED; else @@ -163,31 +172,34 @@ static __inline__ void viadrv_acknowledge_irqs(drm_via_private_t * dev_priv) } } -int via_driver_vblank_wait(struct drm_device * dev, unsigned int *sequence) +int via_enable_vblank(struct drm_device *dev, int crtc) { - drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; - unsigned int cur_vblank; - int ret = 0; + drm_via_private_t *dev_priv = dev->dev_private; + u32 status; - DRM_DEBUG("\n"); - if (!dev_priv) { - DRM_ERROR("called with no initialization\n"); + if (crtc != 0) { + DRM_ERROR("%s: bad crtc %d\n", __func__, crtc); return -EINVAL; } - viadrv_acknowledge_irqs(dev_priv); + status = VIA_READ(VIA_REG_INTERRUPT); + VIA_WRITE(VIA_REG_INTERRUPT, status & VIA_IRQ_VBLANK_ENABLE); + + VIA_WRITE8(0x83d4, 0x11); + VIA_WRITE8(0x83d5, VIA_READ8(0x83d5) | 0x30); - /* Assume that the user has missed the current sequence number - * by about a day rather than she wants to wait for years - * using vertical blanks... - */ + return 0; +} + +void via_disable_vblank(struct drm_device *dev, int crtc) +{ + drm_via_private_t *dev_priv = dev->dev_private; - DRM_WAIT_ON(ret, dev->vbl_queue, 3 * DRM_HZ, - (((cur_vblank = atomic_read(&dev->vbl_received)) - - *sequence) <= (1 << 23))); + VIA_WRITE8(0x83d4, 0x11); + VIA_WRITE8(0x83d5, VIA_READ8(0x83d5) & ~0x30); - *sequence = cur_vblank; - return ret; + if (crtc != 0) + DRM_ERROR("%s: bad crtc %d\n", __func__, crtc); } static int @@ -239,6 +251,7 @@ via_driver_irq_wait(struct drm_device * dev, unsigned int irq, int force_sequenc return ret; } + /* * drm_dma.h hooks */ @@ -292,23 +305,25 @@ void via_driver_irq_preinstall(struct drm_device * dev) } } -void via_driver_irq_postinstall(struct drm_device * dev) +int via_driver_irq_postinstall(struct drm_device *dev) { drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; u32 status; - DRM_DEBUG("\n"); - if (dev_priv) { - status = VIA_READ(VIA_REG_INTERRUPT); - VIA_WRITE(VIA_REG_INTERRUPT, status | VIA_IRQ_GLOBAL - | dev_priv->irq_enable_mask); + DRM_DEBUG("via_driver_irq_postinstall\n"); + if (!dev_priv) + return -EINVAL; - /* Some magic, oh for some data sheets ! */ + drm_vblank_init(dev, 1); + status = VIA_READ(VIA_REG_INTERRUPT); + VIA_WRITE(VIA_REG_INTERRUPT, status | VIA_IRQ_GLOBAL + | dev_priv->irq_enable_mask); - VIA_WRITE8(0x83d4, 0x11); - VIA_WRITE8(0x83d5, VIA_READ8(0x83d5) | 0x30); + /* Some magic, oh for some data sheets ! */ + VIA_WRITE8(0x83d4, 0x11); + VIA_WRITE8(0x83d5, VIA_READ8(0x83d5) | 0x30); - } + return 0; } void via_driver_irq_uninstall(struct drm_device * dev) @@ -339,9 +354,6 @@ int via_wait_irq(struct drm_device *dev, void *data, struct drm_file *file_priv) drm_via_irq_t *cur_irq = dev_priv->via_irqs; int force_sequence; - if (!dev->irq) - return -EINVAL; - if (irqwait->request.irq >= dev_priv->num_irqs) { DRM_ERROR("Trying to wait on unknown irq %d\n", irqwait->request.irq); @@ -352,7 +364,8 @@ int via_wait_irq(struct drm_device *dev, void *data, struct drm_file *file_priv) switch (irqwait->request.type & ~VIA_IRQ_FLAGS_MASK) { case VIA_IRQ_RELATIVE: - irqwait->request.sequence += atomic_read(&cur_irq->irq_received); + irqwait->request.sequence += + atomic_read(&cur_irq->irq_received); irqwait->request.type &= ~_DRM_VBLANK_RELATIVE; case VIA_IRQ_ABSOLUTE: break; diff --git a/drivers/gpu/drm/via/via_mm.c b/drivers/gpu/drm/via/via_mm.c index e64094916e4f..f694cb5ededc 100644 --- a/drivers/gpu/drm/via/via_mm.c +++ b/drivers/gpu/drm/via/via_mm.c @@ -93,8 +93,7 @@ int via_final_context(struct drm_device *dev, int context) /* Last context, perform cleanup */ if (dev->ctx_count == 1 && dev->dev_private) { DRM_DEBUG("Last Context\n"); - if (dev->irq) - drm_irq_uninstall(dev); + drm_irq_uninstall(dev); via_cleanup_futex(dev_priv); via_do_cleanup_map(dev); } diff --git a/drivers/media/common/tuners/mxl5005s.c b/drivers/media/common/tuners/mxl5005s.c index 227642b044ae..a8878244bb3c 100644 --- a/drivers/media/common/tuners/mxl5005s.c +++ b/drivers/media/common/tuners/mxl5005s.c @@ -3481,7 +3481,9 @@ static u16 MXL_ControlWrite_Group(struct dvb_frontend *fe, u16 controlNum, } ctrlVal = 0; for (k = 0; k < state->MXL_Ctrl[i].size; k++) - ctrlVal += state->MXL_Ctrl[i].val[k] * (1 << k); + ctrlVal += state-> + MXL_Ctrl[i].val[k] * + (1 << k); } else return -1; } @@ -3581,7 +3583,7 @@ static void MXL_RegWriteBit(struct dvb_frontend *fe, u8 address, u8 bit, static u32 MXL_Ceiling(u32 value, u32 resolution) { - return (value/resolution + (value % resolution > 0 ? 1 : 0)); + return value / resolution + (value % resolution > 0 ? 1 : 0); } /* Retrieve the Initialzation Registers */ @@ -3910,7 +3912,10 @@ static int mxl5005s_writeregs(struct dvb_frontend *fe, u8 *addrtable, static int mxl5005s_init(struct dvb_frontend *fe) { + struct mxl5005s_state *state = fe->tuner_priv; + dprintk(1, "%s()\n", __func__); + state->current_mode = MXL_QAM; return mxl5005s_reconfigure(fe, MXL_QAM, MXL5005S_BANDWIDTH_6MHZ); } @@ -4092,7 +4097,6 @@ struct dvb_frontend *mxl5005s_attach(struct dvb_frontend *fe, state->frontend = fe; state->config = config; state->i2c = i2c; - state->current_mode = MXL_QAM; printk(KERN_INFO "MXL5005S: Attached at address 0x%02x\n", config->i2c_address); diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c index 2a1aac1cc755..fb3f3b3adaba 100644 --- a/drivers/media/common/tuners/tuner-simple.c +++ b/drivers/media/common/tuners/tuner-simple.c @@ -493,6 +493,7 @@ static int simple_radio_bandswitch(struct dvb_frontend *fe, u8 *buffer) case TUNER_PHILIPS_FM1216ME_MK3: case TUNER_PHILIPS_FM1236_MK3: case TUNER_PHILIPS_FMD1216ME_MK3: + case TUNER_PHILIPS_FMD1216MEX_MK3: case TUNER_LG_NTSC_TAPE: case TUNER_PHILIPS_FM1256_IH3: case TUNER_TCL_MF02GIP_5N: @@ -767,6 +768,7 @@ static void simple_set_dvb(struct dvb_frontend *fe, u8 *buf, switch (priv->type) { case TUNER_PHILIPS_FMD1216ME_MK3: + case TUNER_PHILIPS_FMD1216MEX_MK3: if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ && params->frequency >= 158870000) buf[3] |= 0x08; diff --git a/drivers/media/common/tuners/tuner-types.c b/drivers/media/common/tuners/tuner-types.c index 04961a1f44be..7c0bc064c008 100644 --- a/drivers/media/common/tuners/tuner-types.c +++ b/drivers/media/common/tuners/tuner-types.c @@ -946,7 +946,7 @@ static struct tuner_params tuner_tena_9533_di_params[] = { }, }; -/* ------------ TUNER_PHILIPS_FMD1216ME_MK3 - Philips PAL ------------ */ +/* ------------ TUNER_PHILIPS_FMD1216ME(X)_MK3 - Philips PAL ------------ */ static struct tuner_range tuner_philips_fmd1216me_mk3_pal_ranges[] = { { 16 * 160.00 /*MHz*/, 0x86, 0x51, }, @@ -984,6 +984,27 @@ static struct tuner_params tuner_philips_fmd1216me_mk3_params[] = { }, }; +static struct tuner_params tuner_philips_fmd1216mex_mk3_params[] = { + { + .type = TUNER_PARAM_TYPE_PAL, + .ranges = tuner_philips_fmd1216me_mk3_pal_ranges, + .count = ARRAY_SIZE(tuner_philips_fmd1216me_mk3_pal_ranges), + .has_tda9887 = 1, + .port1_active = 1, + .port2_active = 1, + .port2_fm_high_sensitivity = 1, + .port2_invert_for_secam_lc = 1, + .port1_set_for_fm_mono = 1, + .radio_if = 1, + .fm_gain_normal = 1, + }, + { + .type = TUNER_PARAM_TYPE_DIGITAL, + .ranges = tuner_philips_fmd1216me_mk3_dvb_ranges, + .count = ARRAY_SIZE(tuner_philips_fmd1216me_mk3_dvb_ranges), + .iffreq = 16 * 36.125, /*MHz*/ + }, +}; /* ------ TUNER_LG_TDVS_H06XF - LG INNOTEK / INFINEON ATSC ----- */ @@ -1663,6 +1684,16 @@ struct tunertype tuners[] = { .params = tuner_tcl_mf02gip_5n_params, .count = ARRAY_SIZE(tuner_tcl_mf02gip_5n_params), }, + [TUNER_PHILIPS_FMD1216MEX_MK3] = { /* Philips PAL */ + .name = "Philips FMD1216MEX MK3 Hybrid Tuner", + .params = tuner_philips_fmd1216mex_mk3_params, + .count = ARRAY_SIZE(tuner_philips_fmd1216mex_mk3_params), + .min = 16 * 50.87, + .max = 16 * 858.00, + .stepsize = 166667, + .initdata = tua603x_agc112, + .sleepdata = (u8[]){ 4, 0x9c, 0x60, 0x85, 0x54 }, + }, }; EXPORT_SYMBOL(tuners); diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c index f9c2bb917f54..e12d13e0cbe9 100644 --- a/drivers/media/common/tuners/xc5000.c +++ b/drivers/media/common/tuners/xc5000.c @@ -43,7 +43,7 @@ MODULE_PARM_DESC(init_fw, "Load firmware during driver initialization."); static DEFINE_MUTEX(xc5000_list_mutex); static LIST_HEAD(hybrid_tuner_instance_list); -#define dprintk(level,fmt, arg...) if (debug >= level) \ +#define dprintk(level, fmt, arg...) if (debug >= level) \ printk(KERN_INFO "%s: " fmt, "xc5000", ## arg) #define XC5000_DEFAULT_FIRMWARE "dvb-fe-xc5000-1.1.fw" @@ -138,11 +138,11 @@ struct xc5000_priv { immediately the length of the following transaction. */ -typedef struct { +struct XC_TV_STANDARD { char *Name; u16 AudioMode; u16 VideoMode; -} XC_TV_STANDARD; +}; /* Tuner standards */ #define MN_NTSC_PAL_BTSC 0 @@ -169,7 +169,7 @@ typedef struct { #define FM_Radio_INPUT2 21 #define FM_Radio_INPUT1 22 -static XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = { +static struct XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = { {"M/N-NTSC/PAL-BTSC", 0x0400, 0x8020}, {"M/N-NTSC/PAL-A2", 0x0600, 0x8020}, {"M/N-NTSC/PAL-EIAJ", 0x0440, 0x8020}, @@ -183,7 +183,7 @@ static XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = { {"D/K-PAL-NICAM", 0x0E80, 0x8009}, {"D/K-PAL-MONO", 0x1478, 0x8009}, {"D/K-SECAM-A2 DK1", 0x1200, 0x8009}, - {"D/K-SECAM-A2 L/DK3",0x0E00, 0x8009}, + {"D/K-SECAM-A2 L/DK3", 0x0E00, 0x8009}, {"D/K-SECAM-A2 MONO", 0x1478, 0x8009}, {"L-SECAM-NICAM", 0x8E82, 0x0009}, {"L'-SECAM-NICAM", 0x8E82, 0x4009}, @@ -307,9 +307,10 @@ static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence) unsigned int len, pos, index; u8 buf[XC_MAX_I2C_WRITE_LENGTH]; - index=0; - while ((i2c_sequence[index]!=0xFF) || (i2c_sequence[index+1]!=0xFF)) { - len = i2c_sequence[index]* 256 + i2c_sequence[index+1]; + index = 0; + while ((i2c_sequence[index] != 0xFF) || + (i2c_sequence[index + 1] != 0xFF)) { + len = i2c_sequence[index] * 256 + i2c_sequence[index+1]; if (len == 0x0000) { /* RESET command */ result = xc_reset(fe); @@ -329,15 +330,17 @@ static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence) buf[1] = i2c_sequence[index + 1]; pos = 2; while (pos < len) { - if ((len - pos) > XC_MAX_I2C_WRITE_LENGTH - 2) { - nbytes_to_send = XC_MAX_I2C_WRITE_LENGTH; - } else { + if ((len - pos) > XC_MAX_I2C_WRITE_LENGTH - 2) + nbytes_to_send = + XC_MAX_I2C_WRITE_LENGTH; + else nbytes_to_send = (len - pos + 2); + for (i = 2; i < nbytes_to_send; i++) { + buf[i] = i2c_sequence[index + pos + + i - 2]; } - for (i=2; i<nbytes_to_send; i++) { - buf[i] = i2c_sequence[index + pos + i - 2]; - } - result = xc_send_i2c_data(priv, buf, nbytes_to_send); + result = xc_send_i2c_data(priv, buf, + nbytes_to_send); if (result != XC_RESULT_SUCCESS) return result; @@ -386,8 +389,7 @@ static int xc_SetSignalSource(struct xc5000_priv *priv, u16 rf_mode) dprintk(1, "%s(%d) Source = %s\n", __func__, rf_mode, rf_mode == XC_RF_MODE_AIR ? "ANTENNA" : "CABLE"); - if ((rf_mode != XC_RF_MODE_AIR) && (rf_mode != XC_RF_MODE_CABLE)) - { + if ((rf_mode != XC_RF_MODE_AIR) && (rf_mode != XC_RF_MODE_CABLE)) { rf_mode = XC_RF_MODE_CABLE; printk(KERN_ERR "%s(), Invalid mode, defaulting to CABLE", @@ -560,13 +562,13 @@ static int xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len) .flags = I2C_M_RD, .buf = buf, .len = len }; if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) { - printk(KERN_ERR "xc5000 I2C read failed (len=%i)\n",(int)len); + printk(KERN_ERR "xc5000 I2C read failed (len=%i)\n", (int)len); return -EREMOTEIO; } return 0; } -static int xc5000_fwupload(struct dvb_frontend* fe) +static int xc5000_fwupload(struct dvb_frontend *fe) { struct xc5000_priv *priv = fe->tuner_priv; const struct firmware *fw; @@ -576,7 +578,8 @@ static int xc5000_fwupload(struct dvb_frontend* fe) printk(KERN_INFO "xc5000: waiting for firmware upload (%s)...\n", XC5000_DEFAULT_FIRMWARE); - ret = request_firmware(&fw, XC5000_DEFAULT_FIRMWARE, &priv->i2c_props.adap->dev); + ret = request_firmware(&fw, XC5000_DEFAULT_FIRMWARE, + &priv->i2c_props.adap->dev); if (ret) { printk(KERN_ERR "xc5000: Upload failed. (file not found?)\n"); ret = XC_RESULT_RESET_FAILURE; @@ -592,7 +595,7 @@ static int xc5000_fwupload(struct dvb_frontend* fe) ret = XC_RESULT_RESET_FAILURE; } else { printk(KERN_INFO "xc5000: firmware upload\n"); - ret = xc_load_i2c_sequence(fe, fw->data ); + ret = xc_load_i2c_sequence(fe, fw->data); } out: @@ -651,7 +654,7 @@ static int xc5000_set_params(struct dvb_frontend *fe, dprintk(1, "%s() frequency=%d (Hz)\n", __func__, params->frequency); - switch(params->u.vsb.modulation) { + switch (params->u.vsb.modulation) { case VSB_8: case VSB_16: dprintk(1, "%s() VSB modulation\n", __func__); @@ -748,42 +751,42 @@ static int xc5000_set_analog_params(struct dvb_frontend *fe, /* FIX ME: Some video standards may have several possible audio standards. We simply default to one of them here. */ - if(params->std & V4L2_STD_MN) { + if (params->std & V4L2_STD_MN) { /* default to BTSC audio standard */ priv->video_standard = MN_NTSC_PAL_BTSC; goto tune_channel; } - if(params->std & V4L2_STD_PAL_BG) { + if (params->std & V4L2_STD_PAL_BG) { /* default to NICAM audio standard */ priv->video_standard = BG_PAL_NICAM; goto tune_channel; } - if(params->std & V4L2_STD_PAL_I) { + if (params->std & V4L2_STD_PAL_I) { /* default to NICAM audio standard */ priv->video_standard = I_PAL_NICAM; goto tune_channel; } - if(params->std & V4L2_STD_PAL_DK) { + if (params->std & V4L2_STD_PAL_DK) { /* default to NICAM audio standard */ priv->video_standard = DK_PAL_NICAM; goto tune_channel; } - if(params->std & V4L2_STD_SECAM_DK) { + if (params->std & V4L2_STD_SECAM_DK) { /* default to A2 DK1 audio standard */ priv->video_standard = DK_SECAM_A2DK1; goto tune_channel; } - if(params->std & V4L2_STD_SECAM_L) { + if (params->std & V4L2_STD_SECAM_L) { priv->video_standard = L_SECAM_NICAM; goto tune_channel; } - if(params->std & V4L2_STD_SECAM_LC) { + if (params->std & V4L2_STD_SECAM_LC) { priv->video_standard = LC_SECAM_NICAM; goto tune_channel; } @@ -791,7 +794,7 @@ static int xc5000_set_analog_params(struct dvb_frontend *fe, tune_channel: ret = xc_SetSignalSource(priv, priv->rf_mode); if (ret != XC_RESULT_SUCCESS) { - printk(KERN_ERR + printk(KERN_ERR "xc5000: xc_SetSignalSource(%d) failed\n", priv->rf_mode); return -EREMOTEIO; @@ -863,7 +866,7 @@ static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe) * I2C transactions until calibration is complete. This way we * don't have to rely on clock stretching working. */ - xc_wait( 100 ); + xc_wait(100); /* Default to "CABLE" mode */ ret |= xc_write_reg(priv, XREG_SIGNALSOURCE, XC_RF_MODE_CABLE); @@ -885,15 +888,13 @@ static int xc5000_sleep(struct dvb_frontend *fe) */ ret = xc_shutdown(priv); - if(ret != XC_RESULT_SUCCESS) { + if (ret != XC_RESULT_SUCCESS) { printk(KERN_ERR "xc5000: %s() unable to shutdown tuner\n", __func__); return -EREMOTEIO; - } - else { + } else return XC_RESULT_SUCCESS; - } } static int xc5000_init(struct dvb_frontend *fe) @@ -989,7 +990,7 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != 0) goto fail; - switch(id) { + switch (id) { case XC_PRODUCT_ID_FW_LOADED: printk(KERN_INFO "xc5000: Successfully identified at address 0x%02x\n", diff --git a/drivers/media/common/tuners/xc5000.h b/drivers/media/common/tuners/xc5000.h index cf1a558e0e7f..f4c146698a00 100644 --- a/drivers/media/common/tuners/xc5000.h +++ b/drivers/media/common/tuners/xc5000.h @@ -45,17 +45,17 @@ struct xc5000_config { #if defined(CONFIG_MEDIA_TUNER_XC5000) || \ (defined(CONFIG_MEDIA_TUNER_XC5000_MODULE) && defined(MODULE)) -extern struct dvb_frontend* xc5000_attach(struct dvb_frontend *fe, +extern struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct xc5000_config *cfg); #else -static inline struct dvb_frontend* xc5000_attach(struct dvb_frontend *fe, +static inline struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct xc5000_config *cfg) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } -#endif // CONFIG_MEDIA_TUNER_XC5000 +#endif -#endif // __XC5000_H__ +#endif diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c index f7321448b4b1..14e627ef6465 100644 --- a/drivers/media/dvb/dm1105/dm1105.c +++ b/drivers/media/dvb/dm1105/dm1105.c @@ -595,6 +595,18 @@ static void dm1105dvb_hw_exit(struct dm1105dvb *dm1105dvb) dm1105dvb_dma_unmap(dm1105dvb); } +static struct stv0299_config sharp_z0194a_config = { + .demod_address = 0x68, + .inittab = sharp_z0194a_inittab, + .mclk = 88000000UL, + .invert = 1, + .skip_reinit = 0, + .lock_output = STV0299_LOCKOUTPUT_1, + .volt13_op0_op1 = STV0299_VOLT13_OP1, + .min_delay_ms = 100, + .set_symbol_rate = sharp_z0194a_set_symbol_rate, +}; + static struct stv0288_config earda_config = { .demod_address = 0x68, .min_delay_ms = 100, diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index f170e822fadc..5689d1f1d444 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -47,6 +47,7 @@ static int dvb_shutdown_timeout; static int dvb_force_auto_inversion; static int dvb_override_tune_delay; static int dvb_powerdown_on_sleep = 1; +static int dvb_mfe_wait_time = 5; module_param_named(frontend_debug, dvb_frontend_debug, int, 0644); MODULE_PARM_DESC(frontend_debug, "Turn on/off frontend core debugging (default:off)."); @@ -58,6 +59,8 @@ module_param(dvb_override_tune_delay, int, 0644); MODULE_PARM_DESC(dvb_override_tune_delay, "0: normal (default), >0 => delay in milliseconds to wait for lock after a tune attempt"); module_param(dvb_powerdown_on_sleep, int, 0644); MODULE_PARM_DESC(dvb_powerdown_on_sleep, "0: do not power down, 1: turn LNB voltage off on sleep (default)"); +module_param(dvb_mfe_wait_time, int, 0644); +MODULE_PARM_DESC(dvb_mfe_wait_time, "Wait up to <mfe_wait_time> seconds on open() for multi-frontend to become available (default:5 seconds)"); #define dprintk if (dvb_frontend_debug) printk @@ -212,8 +215,9 @@ static int dvb_frontend_get_event(struct dvb_frontend *fe, static void dvb_frontend_init(struct dvb_frontend *fe) { - dprintk ("DVB: initialising frontend %i (%s)...\n", + dprintk ("DVB: initialising adapter %i frontend %i (%s)...\n", fe->dvb->num, + fe->id, fe->ops.info.name); if (fe->ops.init) @@ -686,7 +690,7 @@ static int dvb_frontend_start(struct dvb_frontend *fe) mb(); fe_thread = kthread_run(dvb_frontend_thread, fe, - "kdvb-fe-%i", fe->dvb->num); + "kdvb-ad-%i-fe-%i", fe->dvb->num,fe->id); if (IS_ERR(fe_thread)) { ret = PTR_ERR(fe_thread); printk("dvb_frontend_start: failed to start kthread (%d)\n", ret); @@ -710,8 +714,8 @@ static void dvb_frontend_get_frequeny_limits(struct dvb_frontend *fe, *freq_max = min(fe->ops.info.frequency_max, fe->ops.tuner_ops.info.frequency_max); if (*freq_min == 0 || *freq_max == 0) - printk(KERN_WARNING "DVB: frontend %u frequency limits undefined - fix the driver\n", - fe->dvb->num); + printk(KERN_WARNING "DVB: adapter %i frontend %u frequency limits undefined - fix the driver\n", + fe->dvb->num,fe->id); } static int dvb_frontend_check_parameters(struct dvb_frontend *fe, @@ -724,8 +728,8 @@ static int dvb_frontend_check_parameters(struct dvb_frontend *fe, dvb_frontend_get_frequeny_limits(fe, &freq_min, &freq_max); if ((freq_min && parms->frequency < freq_min) || (freq_max && parms->frequency > freq_max)) { - printk(KERN_WARNING "DVB: frontend %u frequency %u out of range (%u..%u)\n", - fe->dvb->num, parms->frequency, freq_min, freq_max); + printk(KERN_WARNING "DVB: adapter %i frontend %i frequency %u out of range (%u..%u)\n", + fe->dvb->num, fe->id, parms->frequency, freq_min, freq_max); return -EINVAL; } @@ -735,8 +739,8 @@ static int dvb_frontend_check_parameters(struct dvb_frontend *fe, parms->u.qpsk.symbol_rate < fe->ops.info.symbol_rate_min) || (fe->ops.info.symbol_rate_max && parms->u.qpsk.symbol_rate > fe->ops.info.symbol_rate_max)) { - printk(KERN_WARNING "DVB: frontend %u symbol rate %u out of range (%u..%u)\n", - fe->dvb->num, parms->u.qpsk.symbol_rate, + printk(KERN_WARNING "DVB: adapter %i frontend %i symbol rate %u out of range (%u..%u)\n", + fe->dvb->num, fe->id, parms->u.qpsk.symbol_rate, fe->ops.info.symbol_rate_min, fe->ops.info.symbol_rate_max); return -EINVAL; } @@ -746,8 +750,8 @@ static int dvb_frontend_check_parameters(struct dvb_frontend *fe, parms->u.qam.symbol_rate < fe->ops.info.symbol_rate_min) || (fe->ops.info.symbol_rate_max && parms->u.qam.symbol_rate > fe->ops.info.symbol_rate_max)) { - printk(KERN_WARNING "DVB: frontend %u symbol rate %u out of range (%u..%u)\n", - fe->dvb->num, parms->u.qam.symbol_rate, + printk(KERN_WARNING "DVB: adapter %i frontend %i symbol rate %u out of range (%u..%u)\n", + fe->dvb->num, fe->id, parms->u.qam.symbol_rate, fe->ops.info.symbol_rate_min, fe->ops.info.symbol_rate_max); return -EINVAL; } @@ -899,30 +903,30 @@ void dtv_property_dump(struct dtv_property *tvp) int i; if (tvp->cmd <= 0 || tvp->cmd > DTV_MAX_COMMAND) { - printk("%s: tvp.cmd = 0x%08x (undefined/unknown/invalid)\n", + printk(KERN_WARNING "%s: tvp.cmd = 0x%08x undefined\n", __func__, tvp->cmd); return; } - printk("%s() tvp.cmd = 0x%08x (%s)\n" - ,__FUNCTION__ + dprintk("%s() tvp.cmd = 0x%08x (%s)\n" + ,__func__ ,tvp->cmd ,dtv_cmds[ tvp->cmd ].name); if(dtv_cmds[ tvp->cmd ].buffer) { - printk("%s() tvp.u.buffer.len = 0x%02x\n" - ,__FUNCTION__ + dprintk("%s() tvp.u.buffer.len = 0x%02x\n" + ,__func__ ,tvp->u.buffer.len); for(i = 0; i < tvp->u.buffer.len; i++) - printk("%s() tvp.u.buffer.data[0x%02x] = 0x%02x\n" - ,__FUNCTION__ + dprintk("%s() tvp.u.buffer.data[0x%02x] = 0x%02x\n" + ,__func__ ,i ,tvp->u.buffer.data[i]); } else - printk("%s() tvp.u.data = 0x%08x\n", __FUNCTION__, tvp->u.data); + dprintk("%s() tvp.u.data = 0x%08x\n", __func__, tvp->u.data); } int is_legacy_delivery_system(fe_delivery_system_t s) @@ -942,8 +946,6 @@ void dtv_property_cache_sync(struct dvb_frontend *fe, struct dvb_frontend_parame { struct dtv_frontend_properties *c = &fe->dtv_property_cache; - printk("%s()\n", __FUNCTION__); - c->frequency = p->frequency; c->inversion = p->inversion; @@ -998,27 +1000,25 @@ void dtv_property_legacy_params_sync(struct dvb_frontend *fe) struct dvb_frontend_private *fepriv = fe->frontend_priv; struct dvb_frontend_parameters *p = &fepriv->parameters; - printk("%s()\n", __FUNCTION__); - p->frequency = c->frequency; p->inversion = c->inversion; switch (fe->ops.info.type) { case FE_QPSK: - printk("%s() Preparing QPSK req\n", __FUNCTION__); + dprintk("%s() Preparing QPSK req\n", __func__); p->u.qpsk.symbol_rate = c->symbol_rate; p->u.qpsk.fec_inner = c->fec_inner; c->delivery_system = SYS_DVBS; break; case FE_QAM: - printk("%s() Preparing QAM req\n", __FUNCTION__); + dprintk("%s() Preparing QAM req\n", __func__); p->u.qam.symbol_rate = c->symbol_rate; p->u.qam.fec_inner = c->fec_inner; p->u.qam.modulation = c->modulation; c->delivery_system = SYS_DVBC_ANNEX_AC; break; case FE_OFDM: - printk("%s() Preparing OFDM req\n", __FUNCTION__); + dprintk("%s() Preparing OFDM req\n", __func__); if (c->bandwidth_hz == 6000000) p->u.ofdm.bandwidth = BANDWIDTH_6_MHZ; else if (c->bandwidth_hz == 7000000) @@ -1036,7 +1036,7 @@ void dtv_property_legacy_params_sync(struct dvb_frontend *fe) c->delivery_system = SYS_DVBT; break; case FE_ATSC: - printk("%s() Preparing VSB req\n", __FUNCTION__); + dprintk("%s() Preparing VSB req\n", __func__); p->u.vsb.modulation = c->modulation; if ((c->modulation == VSB_8) || (c->modulation == VSB_16)) c->delivery_system = SYS_ATSC; @@ -1055,14 +1055,13 @@ void dtv_property_adv_params_sync(struct dvb_frontend *fe) struct dvb_frontend_private *fepriv = fe->frontend_priv; struct dvb_frontend_parameters *p = &fepriv->parameters; - printk("%s()\n", __FUNCTION__); - p->frequency = c->frequency; p->inversion = c->inversion; switch(c->modulation) { case PSK_8: case APSK_16: + case APSK_32: case QPSK: p->u.qpsk.symbol_rate = c->symbol_rate; p->u.qpsk.fec_inner = c->fec_inner; @@ -1089,19 +1088,17 @@ void dtv_property_cache_submit(struct dvb_frontend *fe) { struct dtv_frontend_properties *c = &fe->dtv_property_cache; - printk("%s()\n", __FUNCTION__); - /* For legacy delivery systems we don't need the delivery_system to * be specified, but we populate the older structures from the cache * so we can call set_frontend on older drivers. */ if(is_legacy_delivery_system(c->delivery_system)) { - printk("%s() legacy, modulation = %d\n", __FUNCTION__, c->modulation); + dprintk("%s() legacy, modulation = %d\n", __func__, c->modulation); dtv_property_legacy_params_sync(fe); } else { - printk("%s() adv, modulation = %d\n", __FUNCTION__, c->modulation); + dprintk("%s() adv, modulation = %d\n", __func__, c->modulation); /* For advanced delivery systems / modulation types ... * we seed the lecacy dvb_frontend_parameters structure @@ -1123,8 +1120,6 @@ int dtv_property_process_get(struct dvb_frontend *fe, struct dtv_property *tvp, { int r = 0; - printk("%s()\n", __FUNCTION__); - dtv_property_dump(tvp); /* Allow the frontend to validate incoming properties */ @@ -1198,7 +1193,6 @@ int dtv_property_process_set(struct dvb_frontend *fe, struct dtv_property *tvp, { int r = 0; struct dvb_frontend_private *fepriv = fe->frontend_priv; - printk("%s()\n", __FUNCTION__); dtv_property_dump(tvp); /* Allow the frontend to validate incoming properties */ @@ -1213,7 +1207,7 @@ int dtv_property_process_set(struct dvb_frontend *fe, struct dtv_property *tvp, /* Reset a cache of data specific to the frontend here. This does * not effect hardware. */ - printk("%s() Flushing property cache\n", __FUNCTION__); + dprintk("%s() Flushing property cache\n", __func__); memset(&fe->dtv_property_cache, 0, sizeof(struct dtv_frontend_properties)); fe->dtv_property_cache.state = tvp->cmd; fe->dtv_property_cache.delivery_system = SYS_UNDEFINED; @@ -1224,7 +1218,7 @@ int dtv_property_process_set(struct dvb_frontend *fe, struct dtv_property *tvp, * ioctl. */ fe->dtv_property_cache.state = tvp->cmd; - printk("%s() Finalised property cache\n", __FUNCTION__); + dprintk("%s() Finalised property cache\n", __func__); dtv_property_cache_submit(fe); r |= dvb_frontend_ioctl_legacy(inode, file, FE_SET_FRONTEND, @@ -1335,12 +1329,10 @@ static int dvb_frontend_ioctl_properties(struct inode *inode, struct file *file, dprintk("%s\n", __func__); if(cmd == FE_SET_PROPERTY) { - printk("%s() FE_SET_PROPERTY\n", __FUNCTION__); - tvps = (struct dtv_properties __user *)parg; - printk("%s() properties.num = %d\n", __FUNCTION__, tvps->num); - printk("%s() properties.props = %p\n", __FUNCTION__, tvps->props); + dprintk("%s() properties.num = %d\n", __func__, tvps->num); + dprintk("%s() properties.props = %p\n", __func__, tvps->props); /* Put an arbitrary limit on the number of messages that can * be sent at once */ @@ -1364,18 +1356,16 @@ static int dvb_frontend_ioctl_properties(struct inode *inode, struct file *file, err |= (tvp + i)->result; } - if(fe->dtv_property_cache.state == DTV_TUNE) { - printk("%s() Property cache is full, tuning\n", __FUNCTION__); - } + if(fe->dtv_property_cache.state == DTV_TUNE) + dprintk("%s() Property cache is full, tuning\n", __func__); } else if(cmd == FE_GET_PROPERTY) { - printk("%s() FE_GET_PROPERTY\n", __FUNCTION__); tvps = (struct dtv_properties __user *)parg; - printk("%s() properties.num = %d\n", __FUNCTION__, tvps->num); - printk("%s() properties.props = %p\n", __FUNCTION__, tvps->props); + dprintk("%s() properties.num = %d\n", __func__, tvps->num); + dprintk("%s() properties.props = %p\n", __func__, tvps->props); /* Put an arbitrary limit on the number of messages that can * be sent at once */ @@ -1704,13 +1694,53 @@ static int dvb_frontend_open(struct inode *inode, struct file *file) struct dvb_device *dvbdev = file->private_data; struct dvb_frontend *fe = dvbdev->priv; struct dvb_frontend_private *fepriv = fe->frontend_priv; + struct dvb_adapter *adapter = fe->dvb; int ret; dprintk ("%s\n", __func__); + if (adapter->mfe_shared) { + mutex_lock (&adapter->mfe_lock); + + if (adapter->mfe_dvbdev == NULL) + adapter->mfe_dvbdev = dvbdev; + + else if (adapter->mfe_dvbdev != dvbdev) { + struct dvb_device + *mfedev = adapter->mfe_dvbdev; + struct dvb_frontend + *mfe = mfedev->priv; + struct dvb_frontend_private + *mfepriv = mfe->frontend_priv; + int mferetry = (dvb_mfe_wait_time << 1); + + mutex_unlock (&adapter->mfe_lock); + while (mferetry-- && (mfedev->users != -1 || + mfepriv->thread != NULL)) { + if(msleep_interruptible(500)) { + if(signal_pending(current)) + return -EINTR; + } + } + + mutex_lock (&adapter->mfe_lock); + if(adapter->mfe_dvbdev != dvbdev) { + mfedev = adapter->mfe_dvbdev; + mfe = mfedev->priv; + mfepriv = mfe->frontend_priv; + if (mfedev->users != -1 || + mfepriv->thread != NULL) { + mutex_unlock (&adapter->mfe_lock); + return -EBUSY; + } + adapter->mfe_dvbdev = dvbdev; + } + } + } + if (dvbdev->users == -1 && fe->ops.ts_bus_ctrl) { if ((ret = fe->ops.ts_bus_ctrl(fe, 1)) < 0) - return ret; + goto err0; } if ((ret = dvb_generic_open (inode, file)) < 0) @@ -1730,6 +1760,8 @@ static int dvb_frontend_open(struct inode *inode, struct file *file) fepriv->events.eventr = fepriv->events.eventw = 0; } + if (adapter->mfe_shared) + mutex_unlock (&adapter->mfe_lock); return ret; err2: @@ -1737,6 +1769,9 @@ err2: err1: if (dvbdev->users == -1 && fe->ops.ts_bus_ctrl) fe->ops.ts_bus_ctrl(fe, 0); +err0: + if (adapter->mfe_shared) + mutex_unlock (&adapter->mfe_lock); return ret; } @@ -1806,8 +1841,9 @@ int dvb_register_frontend(struct dvb_adapter* dvb, fe->dvb = dvb; fepriv->inversion = INVERSION_OFF; - printk ("DVB: registering frontend %i (%s)...\n", + printk ("DVB: registering adapter %i frontend %i (%s)...\n", fe->dvb->num, + fe->id, fe->ops.info.name); dvb_register_device (fe->dvb, &fepriv->dvbdev, &dvbdev_template, diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h index 3055301ff3ca..db4a63b0a32e 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.h +++ b/drivers/media/dvb/dvb-core/dvb_frontend.h @@ -222,6 +222,7 @@ struct dvb_frontend { struct dtv_frontend_properties dtv_property_cache; #define DVB_FRONTEND_COMPONENT_TUNER 0 int (*callback)(void *adapter_priv, int component, int cmd, int arg); + int id; }; extern int dvb_register_frontend(struct dvb_adapter *dvb, diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c index 665776d72a48..a113744a56cc 100644 --- a/drivers/media/dvb/dvb-core/dvbdev.c +++ b/drivers/media/dvb/dvb-core/dvbdev.c @@ -326,6 +326,9 @@ int dvb_register_adapter(struct dvb_adapter *adap, const char *name, adap->name = name; adap->module = module; adap->device = device; + adap->mfe_shared = 0; + adap->mfe_dvbdev = NULL; + mutex_init (&adap->mfe_lock); list_add_tail (&adap->list_head, &dvb_adapter_list); diff --git a/drivers/media/dvb/dvb-core/dvbdev.h b/drivers/media/dvb/dvb-core/dvbdev.h index 89d12dc477a7..574e336bac35 100644 --- a/drivers/media/dvb/dvb-core/dvbdev.h +++ b/drivers/media/dvb/dvb-core/dvbdev.h @@ -62,6 +62,10 @@ struct dvb_adapter { struct device *device; struct module *module; + + int mfe_shared; /* indicates mutually exclusive frontends */ + struct dvb_device *mfe_dvbdev; /* frontend device in use */ + struct mutex mfe_lock; /* access lock for thread creation */ }; diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c index ca53df61caa8..6286fbbe7fb5 100644 --- a/drivers/media/dvb/dvb-usb/dw2102.c +++ b/drivers/media/dvb/dvb-usb/dw2102.c @@ -422,6 +422,18 @@ static int dw210x_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) return 0; } +static struct stv0299_config sharp_z0194a_config = { + .demod_address = 0x68, + .inittab = sharp_z0194a_inittab, + .mclk = 88000000UL, + .invert = 1, + .skip_reinit = 0, + .lock_output = STV0299_LOCKOUTPUT_1, + .volt13_op0_op1 = STV0299_VOLT13_OP1, + .min_delay_ms = 100, + .set_symbol_rate = sharp_z0194a_set_symbol_rate, +}; + static struct cx24116_config dw2104_config = { .demod_address = 0x55, .mpg_clk_pos_pol = 0x01, diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb/frontends/cx22702.c index 9430e03dba6c..5d1abe34bddb 100644 --- a/drivers/media/dvb/frontends/cx22702.c +++ b/drivers/media/dvb/frontends/cx22702.c @@ -34,13 +34,12 @@ #include "dvb_frontend.h" #include "cx22702.h" - struct cx22702_state { - struct i2c_adapter* i2c; + struct i2c_adapter *i2c; /* configuration settings */ - const struct cx22702_config* config; + const struct cx22702_config *config; struct dvb_frontend frontend; @@ -49,10 +48,13 @@ struct cx22702_state { }; static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Enable verbose debug messages"); + #define dprintk if (debug) printk /* Register values to initialise the demod */ -static u8 init_tab [] = { +static u8 init_tab[] = { 0x00, 0x00, /* Stop aquisition */ 0x0B, 0x06, 0x09, 0x01, @@ -80,65 +82,67 @@ static u8 init_tab [] = { 0xfd, 0x00, }; -static int cx22702_writereg (struct cx22702_state* state, u8 reg, u8 data) +static int cx22702_writereg(struct cx22702_state *state, u8 reg, u8 data) { int ret; - u8 buf [] = { reg, data }; - struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; + u8 buf[] = { reg, data }; + struct i2c_msg msg = { + .addr = state->config->demod_address, .flags = 0, + .buf = buf, .len = 2 }; ret = i2c_transfer(state->i2c, &msg, 1); if (ret != 1) - printk("%s: writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n", + printk(KERN_ERR + "%s: error (reg == 0x%02x, val == 0x%02x, ret == %i)\n", __func__, reg, data, ret); return (ret != 1) ? -1 : 0; } -static u8 cx22702_readreg (struct cx22702_state* state, u8 reg) +static u8 cx22702_readreg(struct cx22702_state *state, u8 reg) { int ret; - u8 b0 [] = { reg }; - u8 b1 [] = { 0 }; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; - struct i2c_msg msg [] = { - { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 }, - { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } }; + struct i2c_msg msg[] = { + { .addr = state->config->demod_address, .flags = 0, + .buf = b0, .len = 1 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, + .buf = b1, .len = 1 } }; ret = i2c_transfer(state->i2c, msg, 2); if (ret != 2) - printk("%s: readreg error (ret == %i)\n", __func__, ret); + printk(KERN_ERR "%s: readreg error (ret == %i)\n", + __func__, ret); return b1[0]; } -static int cx22702_set_inversion (struct cx22702_state *state, int inversion) +static int cx22702_set_inversion(struct cx22702_state *state, int inversion) { u8 val; switch (inversion) { - - case INVERSION_AUTO: - return -EOPNOTSUPP; - - case INVERSION_ON: - val = cx22702_readreg (state, 0x0C); - return cx22702_writereg (state, 0x0C, val | 0x01); - - case INVERSION_OFF: - val = cx22702_readreg (state, 0x0C); - return cx22702_writereg (state, 0x0C, val & 0xfe); - - default: - return -EINVAL; - + case INVERSION_AUTO: + return -EOPNOTSUPP; + case INVERSION_ON: + val = cx22702_readreg(state, 0x0C); + return cx22702_writereg(state, 0x0C, val | 0x01); + case INVERSION_OFF: + val = cx22702_readreg(state, 0x0C); + return cx22702_writereg(state, 0x0C, val & 0xfe); + default: + return -EINVAL; } } /* Retrieve the demod settings */ -static int cx22702_get_tps (struct cx22702_state *state, struct dvb_ofdm_parameters *p) +static int cx22702_get_tps(struct cx22702_state *state, + struct dvb_ofdm_parameters *p) { u8 val; @@ -146,180 +150,281 @@ static int cx22702_get_tps (struct cx22702_state *state, struct dvb_ofdm_paramet if (!(cx22702_readreg(state, 0x0A) & 0x20)) return -EAGAIN; - val = cx22702_readreg (state, 0x01); - switch( (val&0x18)>>3) { - case 0: p->constellation = QPSK; break; - case 1: p->constellation = QAM_16; break; - case 2: p->constellation = QAM_64; break; + val = cx22702_readreg(state, 0x01); + switch ((val & 0x18) >> 3) { + case 0: + p->constellation = QPSK; + break; + case 1: + p->constellation = QAM_16; + break; + case 2: + p->constellation = QAM_64; + break; } - switch( val&0x07 ) { - case 0: p->hierarchy_information = HIERARCHY_NONE; break; - case 1: p->hierarchy_information = HIERARCHY_1; break; - case 2: p->hierarchy_information = HIERARCHY_2; break; - case 3: p->hierarchy_information = HIERARCHY_4; break; + switch (val & 0x07) { + case 0: + p->hierarchy_information = HIERARCHY_NONE; + break; + case 1: + p->hierarchy_information = HIERARCHY_1; + break; + case 2: + p->hierarchy_information = HIERARCHY_2; + break; + case 3: + p->hierarchy_information = HIERARCHY_4; + break; } - val = cx22702_readreg (state, 0x02); - switch( (val&0x38)>>3 ) { - case 0: p->code_rate_HP = FEC_1_2; break; - case 1: p->code_rate_HP = FEC_2_3; break; - case 2: p->code_rate_HP = FEC_3_4; break; - case 3: p->code_rate_HP = FEC_5_6; break; - case 4: p->code_rate_HP = FEC_7_8; break; + val = cx22702_readreg(state, 0x02); + switch ((val & 0x38) >> 3) { + case 0: + p->code_rate_HP = FEC_1_2; + break; + case 1: + p->code_rate_HP = FEC_2_3; + break; + case 2: + p->code_rate_HP = FEC_3_4; + break; + case 3: + p->code_rate_HP = FEC_5_6; + break; + case 4: + p->code_rate_HP = FEC_7_8; + break; } - switch( val&0x07 ) { - case 0: p->code_rate_LP = FEC_1_2; break; - case 1: p->code_rate_LP = FEC_2_3; break; - case 2: p->code_rate_LP = FEC_3_4; break; - case 3: p->code_rate_LP = FEC_5_6; break; - case 4: p->code_rate_LP = FEC_7_8; break; + switch (val & 0x07) { + case 0: + p->code_rate_LP = FEC_1_2; + break; + case 1: + p->code_rate_LP = FEC_2_3; + break; + case 2: + p->code_rate_LP = FEC_3_4; + break; + case 3: + p->code_rate_LP = FEC_5_6; + break; + case 4: + p->code_rate_LP = FEC_7_8; + break; } - - val = cx22702_readreg (state, 0x03); - switch( (val&0x0c)>>2 ) { - case 0: p->guard_interval = GUARD_INTERVAL_1_32; break; - case 1: p->guard_interval = GUARD_INTERVAL_1_16; break; - case 2: p->guard_interval = GUARD_INTERVAL_1_8; break; - case 3: p->guard_interval = GUARD_INTERVAL_1_4; break; + val = cx22702_readreg(state, 0x03); + switch ((val & 0x0c) >> 2) { + case 0: + p->guard_interval = GUARD_INTERVAL_1_32; + break; + case 1: + p->guard_interval = GUARD_INTERVAL_1_16; + break; + case 2: + p->guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + p->guard_interval = GUARD_INTERVAL_1_4; + break; } - switch( val&0x03 ) { - case 0: p->transmission_mode = TRANSMISSION_MODE_2K; break; - case 1: p->transmission_mode = TRANSMISSION_MODE_8K; break; + switch (val & 0x03) { + case 0: + p->transmission_mode = TRANSMISSION_MODE_2K; + break; + case 1: + p->transmission_mode = TRANSMISSION_MODE_8K; + break; } return 0; } -static int cx22702_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) +static int cx22702_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) { - struct cx22702_state* state = fe->demodulator_priv; - dprintk ("%s(%d)\n", __func__, enable); + struct cx22702_state *state = fe->demodulator_priv; + dprintk("%s(%d)\n", __func__, enable); if (enable) - return cx22702_writereg (state, 0x0D, cx22702_readreg(state, 0x0D) & 0xfe); + return cx22702_writereg(state, 0x0D, + cx22702_readreg(state, 0x0D) & 0xfe); else - return cx22702_writereg (state, 0x0D, cx22702_readreg(state, 0x0D) | 1); + return cx22702_writereg(state, 0x0D, + cx22702_readreg(state, 0x0D) | 1); } /* Talk to the demod, set the FEC, GUARD, QAM settings etc */ -static int cx22702_set_tps (struct dvb_frontend* fe, struct dvb_frontend_parameters *p) +static int cx22702_set_tps(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) { u8 val; - struct cx22702_state* state = fe->demodulator_priv; + struct cx22702_state *state = fe->demodulator_priv; if (fe->ops.tuner_ops.set_params) { fe->ops.tuner_ops.set_params(fe, p); - if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); } /* set inversion */ - cx22702_set_inversion (state, p->inversion); + cx22702_set_inversion(state, p->inversion); /* set bandwidth */ - switch(p->u.ofdm.bandwidth) { + switch (p->u.ofdm.bandwidth) { case BANDWIDTH_6_MHZ: - cx22702_writereg(state, 0x0C, (cx22702_readreg(state, 0x0C) & 0xcf) | 0x20 ); + cx22702_writereg(state, 0x0C, + (cx22702_readreg(state, 0x0C) & 0xcf) | 0x20); break; case BANDWIDTH_7_MHZ: - cx22702_writereg(state, 0x0C, (cx22702_readreg(state, 0x0C) & 0xcf) | 0x10 ); + cx22702_writereg(state, 0x0C, + (cx22702_readreg(state, 0x0C) & 0xcf) | 0x10); break; case BANDWIDTH_8_MHZ: - cx22702_writereg(state, 0x0C, cx22702_readreg(state, 0x0C) &0xcf ); + cx22702_writereg(state, 0x0C, + cx22702_readreg(state, 0x0C) & 0xcf); break; default: - dprintk ("%s: invalid bandwidth\n",__func__); + dprintk("%s: invalid bandwidth\n", __func__); return -EINVAL; } - - p->u.ofdm.code_rate_LP = FEC_AUTO; //temp hack as manual not working + p->u.ofdm.code_rate_LP = FEC_AUTO; /* temp hack as manual not working */ /* use auto configuration? */ - if((p->u.ofdm.hierarchy_information==HIERARCHY_AUTO) || - (p->u.ofdm.constellation==QAM_AUTO) || - (p->u.ofdm.code_rate_HP==FEC_AUTO) || - (p->u.ofdm.code_rate_LP==FEC_AUTO) || - (p->u.ofdm.guard_interval==GUARD_INTERVAL_AUTO) || - (p->u.ofdm.transmission_mode==TRANSMISSION_MODE_AUTO) ) { + if ((p->u.ofdm.hierarchy_information == HIERARCHY_AUTO) || + (p->u.ofdm.constellation == QAM_AUTO) || + (p->u.ofdm.code_rate_HP == FEC_AUTO) || + (p->u.ofdm.code_rate_LP == FEC_AUTO) || + (p->u.ofdm.guard_interval == GUARD_INTERVAL_AUTO) || + (p->u.ofdm.transmission_mode == TRANSMISSION_MODE_AUTO)) { /* TPS Source - use hardware driven values */ cx22702_writereg(state, 0x06, 0x10); cx22702_writereg(state, 0x07, 0x9); cx22702_writereg(state, 0x08, 0xC1); - cx22702_writereg(state, 0x0B, cx22702_readreg(state, 0x0B) & 0xfc ); - cx22702_writereg(state, 0x0C, (cx22702_readreg(state, 0x0C) & 0xBF) | 0x40 ); + cx22702_writereg(state, 0x0B, cx22702_readreg(state, 0x0B) + & 0xfc); + cx22702_writereg(state, 0x0C, + (cx22702_readreg(state, 0x0C) & 0xBF) | 0x40); cx22702_writereg(state, 0x00, 0x01); /* Begin aquisition */ - dprintk("%s: Autodetecting\n",__func__); + dprintk("%s: Autodetecting\n", __func__); return 0; } /* manually programmed values */ - val=0; - switch(p->u.ofdm.constellation) { - case QPSK: val = (val&0xe7); break; - case QAM_16: val = (val&0xe7)|0x08; break; - case QAM_64: val = (val&0xe7)|0x10; break; - default: - dprintk ("%s: invalid constellation\n",__func__); - return -EINVAL; + val = 0; + switch (p->u.ofdm.constellation) { + case QPSK: + val = (val & 0xe7); + break; + case QAM_16: + val = (val & 0xe7) | 0x08; + break; + case QAM_64: + val = (val & 0xe7) | 0x10; + break; + default: + dprintk("%s: invalid constellation\n", __func__); + return -EINVAL; } - switch(p->u.ofdm.hierarchy_information) { - case HIERARCHY_NONE: val = (val&0xf8); break; - case HIERARCHY_1: val = (val&0xf8)|1; break; - case HIERARCHY_2: val = (val&0xf8)|2; break; - case HIERARCHY_4: val = (val&0xf8)|3; break; - default: - dprintk ("%s: invalid hierarchy\n",__func__); - return -EINVAL; + switch (p->u.ofdm.hierarchy_information) { + case HIERARCHY_NONE: + val = (val & 0xf8); + break; + case HIERARCHY_1: + val = (val & 0xf8) | 1; + break; + case HIERARCHY_2: + val = (val & 0xf8) | 2; + break; + case HIERARCHY_4: + val = (val & 0xf8) | 3; + break; + default: + dprintk("%s: invalid hierarchy\n", __func__); + return -EINVAL; } - cx22702_writereg (state, 0x06, val); - - val=0; - switch(p->u.ofdm.code_rate_HP) { - case FEC_NONE: - case FEC_1_2: val = (val&0xc7); break; - case FEC_2_3: val = (val&0xc7)|0x08; break; - case FEC_3_4: val = (val&0xc7)|0x10; break; - case FEC_5_6: val = (val&0xc7)|0x18; break; - case FEC_7_8: val = (val&0xc7)|0x20; break; - default: - dprintk ("%s: invalid code_rate_HP\n",__func__); - return -EINVAL; + cx22702_writereg(state, 0x06, val); + + val = 0; + switch (p->u.ofdm.code_rate_HP) { + case FEC_NONE: + case FEC_1_2: + val = (val & 0xc7); + break; + case FEC_2_3: + val = (val & 0xc7) | 0x08; + break; + case FEC_3_4: + val = (val & 0xc7) | 0x10; + break; + case FEC_5_6: + val = (val & 0xc7) | 0x18; + break; + case FEC_7_8: + val = (val & 0xc7) | 0x20; + break; + default: + dprintk("%s: invalid code_rate_HP\n", __func__); + return -EINVAL; } - switch(p->u.ofdm.code_rate_LP) { - case FEC_NONE: - case FEC_1_2: val = (val&0xf8); break; - case FEC_2_3: val = (val&0xf8)|1; break; - case FEC_3_4: val = (val&0xf8)|2; break; - case FEC_5_6: val = (val&0xf8)|3; break; - case FEC_7_8: val = (val&0xf8)|4; break; - default: - dprintk ("%s: invalid code_rate_LP\n",__func__); - return -EINVAL; + switch (p->u.ofdm.code_rate_LP) { + case FEC_NONE: + case FEC_1_2: + val = (val & 0xf8); + break; + case FEC_2_3: + val = (val & 0xf8) | 1; + break; + case FEC_3_4: + val = (val & 0xf8) | 2; + break; + case FEC_5_6: + val = (val & 0xf8) | 3; + break; + case FEC_7_8: + val = (val & 0xf8) | 4; + break; + default: + dprintk("%s: invalid code_rate_LP\n", __func__); + return -EINVAL; } - cx22702_writereg (state, 0x07, val); - - val=0; - switch(p->u.ofdm.guard_interval) { - case GUARD_INTERVAL_1_32: val = (val&0xf3); break; - case GUARD_INTERVAL_1_16: val = (val&0xf3)|0x04; break; - case GUARD_INTERVAL_1_8: val = (val&0xf3)|0x08; break; - case GUARD_INTERVAL_1_4: val = (val&0xf3)|0x0c; break; - default: - dprintk ("%s: invalid guard_interval\n",__func__); - return -EINVAL; + cx22702_writereg(state, 0x07, val); + + val = 0; + switch (p->u.ofdm.guard_interval) { + case GUARD_INTERVAL_1_32: + val = (val & 0xf3); + break; + case GUARD_INTERVAL_1_16: + val = (val & 0xf3) | 0x04; + break; + case GUARD_INTERVAL_1_8: + val = (val & 0xf3) | 0x08; + break; + case GUARD_INTERVAL_1_4: + val = (val & 0xf3) | 0x0c; + break; + default: + dprintk("%s: invalid guard_interval\n", __func__); + return -EINVAL; } - switch(p->u.ofdm.transmission_mode) { - case TRANSMISSION_MODE_2K: val = (val&0xfc); break; - case TRANSMISSION_MODE_8K: val = (val&0xfc)|1; break; - default: - dprintk ("%s: invalid transmission_mode\n",__func__); - return -EINVAL; + switch (p->u.ofdm.transmission_mode) { + case TRANSMISSION_MODE_2K: + val = (val & 0xfc); + break; + case TRANSMISSION_MODE_8K: + val = (val & 0xfc) | 1; + break; + default: + dprintk("%s: invalid transmission_mode\n", __func__); + return -EINVAL; } cx22702_writereg(state, 0x08, val); - cx22702_writereg(state, 0x0B, (cx22702_readreg(state, 0x0B) & 0xfc) | 0x02 ); - cx22702_writereg(state, 0x0C, (cx22702_readreg(state, 0x0C) & 0xBF) | 0x40 ); + cx22702_writereg(state, 0x0B, + (cx22702_readreg(state, 0x0B) & 0xfc) | 0x02); + cx22702_writereg(state, 0x0C, + (cx22702_readreg(state, 0x0C) & 0xBF) | 0x40); /* Begin channel aquisition */ cx22702_writereg(state, 0x00, 0x01); @@ -329,109 +434,111 @@ static int cx22702_set_tps (struct dvb_frontend* fe, struct dvb_frontend_paramet /* Reset the demod hardware and reset all of the configuration registers to a default state. */ -static int cx22702_init (struct dvb_frontend* fe) +static int cx22702_init(struct dvb_frontend *fe) { int i; - struct cx22702_state* state = fe->demodulator_priv; + struct cx22702_state *state = fe->demodulator_priv; - cx22702_writereg (state, 0x00, 0x02); + cx22702_writereg(state, 0x00, 0x02); msleep(10); - for (i=0; i<sizeof(init_tab); i+=2) - cx22702_writereg (state, init_tab[i], init_tab[i+1]); + for (i = 0; i < ARRAY_SIZE(init_tab); i += 2) + cx22702_writereg(state, init_tab[i], init_tab[i + 1]); - cx22702_writereg (state, 0xf8, (state->config->output_mode << 1) & 0x02); + cx22702_writereg(state, 0xf8, (state->config->output_mode << 1) + & 0x02); cx22702_i2c_gate_ctrl(fe, 0); return 0; } -static int cx22702_read_status(struct dvb_frontend* fe, fe_status_t* status) +static int cx22702_read_status(struct dvb_frontend *fe, fe_status_t *status) { - struct cx22702_state* state = fe->demodulator_priv; + struct cx22702_state *state = fe->demodulator_priv; u8 reg0A; u8 reg23; *status = 0; - reg0A = cx22702_readreg (state, 0x0A); - reg23 = cx22702_readreg (state, 0x23); + reg0A = cx22702_readreg(state, 0x0A); + reg23 = cx22702_readreg(state, 0x23); - dprintk ("%s: status demod=0x%02x agc=0x%02x\n" - ,__func__,reg0A,reg23); + dprintk("%s: status demod=0x%02x agc=0x%02x\n" + , __func__, reg0A, reg23); - if(reg0A & 0x10) { + if (reg0A & 0x10) { *status |= FE_HAS_LOCK; *status |= FE_HAS_VITERBI; *status |= FE_HAS_SYNC; } - if(reg0A & 0x20) + if (reg0A & 0x20) *status |= FE_HAS_CARRIER; - if(reg23 < 0xf0) + if (reg23 < 0xf0) *status |= FE_HAS_SIGNAL; return 0; } -static int cx22702_read_ber(struct dvb_frontend* fe, u32* ber) +static int cx22702_read_ber(struct dvb_frontend *fe, u32 *ber) { - struct cx22702_state* state = fe->demodulator_priv; + struct cx22702_state *state = fe->demodulator_priv; - if(cx22702_readreg (state, 0xE4) & 0x02) { + if (cx22702_readreg(state, 0xE4) & 0x02) { /* Realtime statistics */ - *ber = (cx22702_readreg (state, 0xDE) & 0x7F) << 7 - | (cx22702_readreg (state, 0xDF)&0x7F); + *ber = (cx22702_readreg(state, 0xDE) & 0x7F) << 7 + | (cx22702_readreg(state, 0xDF) & 0x7F); } else { /* Averagtine statistics */ - *ber = (cx22702_readreg (state, 0xDE) & 0x7F) << 7 - | cx22702_readreg (state, 0xDF); + *ber = (cx22702_readreg(state, 0xDE) & 0x7F) << 7 + | cx22702_readreg(state, 0xDF); } return 0; } -static int cx22702_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength) +static int cx22702_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) { - struct cx22702_state* state = fe->demodulator_priv; + struct cx22702_state *state = fe->demodulator_priv; u16 rs_ber = 0; - rs_ber = cx22702_readreg (state, 0x23); + rs_ber = cx22702_readreg(state, 0x23); *signal_strength = (rs_ber << 8) | rs_ber; return 0; } -static int cx22702_read_snr(struct dvb_frontend* fe, u16* snr) +static int cx22702_read_snr(struct dvb_frontend *fe, u16 *snr) { - struct cx22702_state* state = fe->demodulator_priv; + struct cx22702_state *state = fe->demodulator_priv; - u16 rs_ber=0; - if(cx22702_readreg (state, 0xE4) & 0x02) { + u16 rs_ber = 0; + if (cx22702_readreg(state, 0xE4) & 0x02) { /* Realtime statistics */ - rs_ber = (cx22702_readreg (state, 0xDE) & 0x7F) << 7 - | (cx22702_readreg (state, 0xDF)& 0x7F); + rs_ber = (cx22702_readreg(state, 0xDE) & 0x7F) << 7 + | (cx22702_readreg(state, 0xDF) & 0x7F); } else { /* Averagine statistics */ - rs_ber = (cx22702_readreg (state, 0xDE) & 0x7F) << 8 - | cx22702_readreg (state, 0xDF); + rs_ber = (cx22702_readreg(state, 0xDE) & 0x7F) << 8 + | cx22702_readreg(state, 0xDF); } *snr = ~rs_ber; return 0; } -static int cx22702_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +static int cx22702_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) { - struct cx22702_state* state = fe->demodulator_priv; + struct cx22702_state *state = fe->demodulator_priv; u8 _ucblocks; /* RS Uncorrectable Packet Count then reset */ - _ucblocks = cx22702_readreg (state, 0xE3); + _ucblocks = cx22702_readreg(state, 0xE3); if (state->prevUCBlocks < _ucblocks) *ucblocks = (_ucblocks - state->prevUCBlocks); else @@ -441,34 +548,36 @@ static int cx22702_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) return 0; } -static int cx22702_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) +static int cx22702_get_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) { - struct cx22702_state* state = fe->demodulator_priv; + struct cx22702_state *state = fe->demodulator_priv; - u8 reg0C = cx22702_readreg (state, 0x0C); + u8 reg0C = cx22702_readreg(state, 0x0C); p->inversion = reg0C & 0x1 ? INVERSION_ON : INVERSION_OFF; - return cx22702_get_tps (state, &p->u.ofdm); + return cx22702_get_tps(state, &p->u.ofdm); } -static int cx22702_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) +static int cx22702_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *tune) { tune->min_delay_ms = 1000; return 0; } -static void cx22702_release(struct dvb_frontend* fe) +static void cx22702_release(struct dvb_frontend *fe) { - struct cx22702_state* state = fe->demodulator_priv; + struct cx22702_state *state = fe->demodulator_priv; kfree(state); } static struct dvb_frontend_ops cx22702_ops; -struct dvb_frontend* cx22702_attach(const struct cx22702_config* config, - struct i2c_adapter* i2c) +struct dvb_frontend *cx22702_attach(const struct cx22702_config *config, + struct i2c_adapter *i2c) { - struct cx22702_state* state = NULL; + struct cx22702_state *state = NULL; /* allocate memory for the internal state */ state = kmalloc(sizeof(struct cx22702_state), GFP_KERNEL); @@ -485,7 +594,8 @@ struct dvb_frontend* cx22702_attach(const struct cx22702_config* config, goto error; /* create dvb_frontend */ - memcpy(&state->frontend.ops, &cx22702_ops, sizeof(struct dvb_frontend_ops)); + memcpy(&state->frontend.ops, &cx22702_ops, + sizeof(struct dvb_frontend_ops)); state->frontend.demodulator_priv = state; return &state->frontend; @@ -493,6 +603,7 @@ error: kfree(state); return NULL; } +EXPORT_SYMBOL(cx22702_attach); static struct dvb_frontend_ops cx22702_ops = { @@ -525,11 +636,6 @@ static struct dvb_frontend_ops cx22702_ops = { .read_ucblocks = cx22702_read_ucblocks, }; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Enable verbose debug messages"); - MODULE_DESCRIPTION("Conexant CX22702 DVB-T Demodulator driver"); MODULE_AUTHOR("Steven Toth"); MODULE_LICENSE("GPL"); - -EXPORT_SYMBOL(cx22702_attach); diff --git a/drivers/media/dvb/frontends/cx22702.h b/drivers/media/dvb/frontends/cx22702.h index b1e465c6c2ce..f154e1f428eb 100644 --- a/drivers/media/dvb/frontends/cx22702.h +++ b/drivers/media/dvb/frontends/cx22702.h @@ -30,8 +30,7 @@ #include <linux/dvb/frontend.h> -struct cx22702_config -{ +struct cx22702_config { /* the demodulator's i2c address */ u8 demod_address; @@ -41,16 +40,19 @@ struct cx22702_config u8 output_mode; }; -#if defined(CONFIG_DVB_CX22702) || (defined(CONFIG_DVB_CX22702_MODULE) && defined(MODULE)) -extern struct dvb_frontend* cx22702_attach(const struct cx22702_config* config, - struct i2c_adapter* i2c); +#if defined(CONFIG_DVB_CX22702) || (defined(CONFIG_DVB_CX22702_MODULE) \ + && defined(MODULE)) +extern struct dvb_frontend *cx22702_attach( + const struct cx22702_config *config, + struct i2c_adapter *i2c); #else -static inline struct dvb_frontend* cx22702_attach(const struct cx22702_config* config, - struct i2c_adapter* i2c) +static inline struct dvb_frontend *cx22702_attach( + const struct cx22702_config *config, + struct i2c_adapter *i2c) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } -#endif // CONFIG_DVB_CX22702 +#endif -#endif // CX22702_H +#endif diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c index deb36f469ada..b144b308a4dd 100644 --- a/drivers/media/dvb/frontends/cx24116.c +++ b/drivers/media/dvb/frontends/cx24116.c @@ -41,10 +41,14 @@ #include "dvb_frontend.h" #include "cx24116.h" -static int debug = 0; +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); + #define dprintk(args...) \ do { \ - if (debug) printk ("cx24116: " args); \ + if (debug) \ + printk(KERN_INFO "cx24116: " args); \ } while (0) #define CX24116_DEFAULT_FIRMWARE "dvb-fe-cx24116.fw" @@ -68,13 +72,20 @@ static int debug = 0; #define CX24116_REG_UCB8 (0xca) #define CX24116_REG_CLKDIV (0xf3) #define CX24116_REG_RATEDIV (0xf9) -#define CX24116_REG_FECSTATUS (0x9c) /* configured fec (not tuned) or actual FEC (tuned) 1=1/2 2=2/3 etc */ + +/* configured fec (not tuned) or actual FEC (tuned) 1=1/2 2=2/3 etc */ +#define CX24116_REG_FECSTATUS (0x9c) /* FECSTATUS bits */ -#define CX24116_FEC_FECMASK (0x1f) /* mask to determine configured fec (not tuned) or actual fec (tuned) */ -#define CX24116_FEC_DVBS (0x20) /* Select DVB-S demodulator, else DVB-S2 */ +/* mask to determine configured fec (not tuned) or actual fec (tuned) */ +#define CX24116_FEC_FECMASK (0x1f) + +/* Select DVB-S demodulator, else DVB-S2 */ +#define CX24116_FEC_DVBS (0x20) #define CX24116_FEC_UNKNOWN (0x40) /* Unknown/unused */ -#define CX24116_FEC_PILOT (0x80) /* Pilot mode requested when tuning else always reset when tuned */ + +/* Pilot mode requested when tuning else always reset when tuned */ +#define CX24116_FEC_PILOT (0x80) /* arg buffer size */ #define CX24116_ARGLEN (0x1e) @@ -116,12 +127,17 @@ static int debug = 0; /* DiSEqC tone burst */ static int toneburst = 1; +module_param(toneburst, int, 0644); +MODULE_PARM_DESC(toneburst, "DiSEqC toneburst 0=OFF, 1=TONE CACHE, "\ + "2=MESSAGE CACHE (default:1)"); /* SNR measurements */ -static int esno_snr = 0; +static int esno_snr; +module_param(esno_snr, int, 0644); +MODULE_PARM_DESC(debug, "SNR return units, 0=PERCENTAGE 0-100, "\ + "1=ESNO(db * 10) (default:0)"); -enum cmds -{ +enum cmds { CMD_SET_VCO = 0x10, CMD_TUNEREQUEST = 0x11, CMD_MPEGCONFIG = 0x13, @@ -138,8 +154,7 @@ enum cmds }; /* The Demod/Tuner can't easily provide these, we cache them */ -struct cx24116_tuning -{ +struct cx24116_tuning { u32 frequency; u32 symbol_rate; fe_spectral_inversion_t inversion; @@ -158,16 +173,14 @@ struct cx24116_tuning }; /* Basic commands that are sent to the firmware */ -struct cx24116_cmd -{ +struct cx24116_cmd { u8 len; u8 args[CX24116_ARGLEN]; }; -struct cx24116_state -{ - struct i2c_adapter* i2c; - const struct cx24116_config* config; +struct cx24116_state { + struct i2c_adapter *i2c; + const struct cx24116_config *config; struct dvb_frontend frontend; @@ -179,19 +192,20 @@ struct cx24116_state struct cx24116_cmd dsec_cmd; }; -static int cx24116_writereg(struct cx24116_state* state, int reg, int data) +static int cx24116_writereg(struct cx24116_state *state, int reg, int data) { u8 buf[] = { reg, data }; struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; int err; - if (debug>1) + if (debug > 1) printk("cx24116: %s: write reg 0x%02x, value 0x%02x\n", - __func__,reg, data); + __func__, reg, data); - if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { - printk("%s: writereg error(err == %i, reg == 0x%02x," + err = i2c_transfer(state->i2c, &msg, 1); + if (err != 1) { + printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x," " value == 0x%02x)\n", __func__, err, reg, data); return -EREMOTEIO; } @@ -200,7 +214,8 @@ static int cx24116_writereg(struct cx24116_state* state, int reg, int data) } /* Bulk byte writes to a single I2C address, for 32k firmware load */ -static int cx24116_writeregN(struct cx24116_state* state, int reg, u8 *data, u16 len) +static int cx24116_writeregN(struct cx24116_state *state, int reg, + const u8 *data, u16 len) { int ret = -EREMOTEIO; struct i2c_msg msg; @@ -221,12 +236,13 @@ static int cx24116_writeregN(struct cx24116_state* state, int reg, u8 *data, u16 msg.buf = buf; msg.len = len + 1; - if (debug>1) - printk("cx24116: %s: write regN 0x%02x, len = %d\n", - __func__,reg, len); + if (debug > 1) + printk(KERN_INFO "cx24116: %s: write regN 0x%02x, len = %d\n", + __func__, reg, len); - if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1) { - printk("%s: writereg error(err == %i, reg == 0x%02x\n", + ret = i2c_transfer(state->i2c, &msg, 1); + if (ret != 1) { + printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x\n", __func__, ret, reg); ret = -EREMOTEIO; } @@ -237,30 +253,35 @@ error: return ret; } -static int cx24116_readreg(struct cx24116_state* state, u8 reg) +static int cx24116_readreg(struct cx24116_state *state, u8 reg) { int ret; u8 b0[] = { reg }; u8 b1[] = { 0 }; struct i2c_msg msg[] = { - { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 }, - { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } + { .addr = state->config->demod_address, .flags = 0, + .buf = b0, .len = 1 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, + .buf = b1, .len = 1 } }; ret = i2c_transfer(state->i2c, msg, 2); if (ret != 2) { - printk("%s: reg=0x%x (error=%d)\n", __func__, reg, ret); + printk(KERN_ERR "%s: reg=0x%x (error=%d)\n", + __func__, reg, ret); return ret; } - if (debug>1) - printk("cx24116: read reg 0x%02x, value 0x%02x\n",reg, b1[0]); + if (debug > 1) + printk(KERN_INFO "cx24116: read reg 0x%02x, value 0x%02x\n", + reg, b1[0]); return b1[0]; } -static int cx24116_set_inversion(struct cx24116_state* state, fe_spectral_inversion_t inversion) +static int cx24116_set_inversion(struct cx24116_state *state, + fe_spectral_inversion_t inversion) { dprintk("%s(%d)\n", __func__, inversion); @@ -308,10 +329,10 @@ static int cx24116_set_inversion(struct cx24116_state* state, fe_spectral_invers * Eg.(2/3) szap "Zone Horror" * * mask/val = 0x04, 0x20 - * status 1f | signal c3c0 | snr a333 | ber 00000098 | unc 00000000 | FE_HAS_LOCK + * status 1f | signal c3c0 | snr a333 | ber 00000098 | unc 0 | FE_HAS_LOCK * * mask/val = 0x04, 0x30 - * status 1f | signal c3c0 | snr a333 | ber 00000000 | unc 00000000 | FE_HAS_LOCK + * status 1f | signal c3c0 | snr a333 | ber 00000000 | unc 0 | FE_HAS_LOCK * * After tuning FECSTATUS contains actual FEC * in use numbered 1 through to 8 for 1/2 .. 2/3 etc @@ -389,18 +410,16 @@ struct cx24116_modfec { */ }; -static int cx24116_lookup_fecmod(struct cx24116_state* state, +static int cx24116_lookup_fecmod(struct cx24116_state *state, fe_modulation_t m, fe_code_rate_t f) { int i, ret = -EOPNOTSUPP; dprintk("%s(0x%02x,0x%02x)\n", __func__, m, f); - for(i=0 ; i < sizeof(CX24116_MODFEC_MODES) / sizeof(struct cx24116_modfec) ; i++) - { - if( (m == CX24116_MODFEC_MODES[i].modulation) && - (f == CX24116_MODFEC_MODES[i].fec) ) - { + for (i = 0; i < ARRAY_SIZE(CX24116_MODFEC_MODES); i++) { + if ((m == CX24116_MODFEC_MODES[i].modulation) && + (f == CX24116_MODFEC_MODES[i].fec)) { ret = i; break; } @@ -409,7 +428,8 @@ static int cx24116_lookup_fecmod(struct cx24116_state* state, return ret; } -static int cx24116_set_fec(struct cx24116_state* state, fe_modulation_t mod, fe_code_rate_t fec) +static int cx24116_set_fec(struct cx24116_state *state, + fe_modulation_t mod, fe_code_rate_t fec) { int ret = 0; @@ -417,7 +437,7 @@ static int cx24116_set_fec(struct cx24116_state* state, fe_modulation_t mod, fe_ ret = cx24116_lookup_fecmod(state, mod, fec); - if(ret < 0) + if (ret < 0) return ret; state->dnxt.fec = fec; @@ -429,7 +449,7 @@ static int cx24116_set_fec(struct cx24116_state* state, fe_modulation_t mod, fe_ return 0; } -static int cx24116_set_symbolrate(struct cx24116_state* state, u32 rate) +static int cx24116_set_symbolrate(struct cx24116_state *state, u32 rate) { dprintk("%s(%d)\n", __func__, rate); @@ -446,42 +466,49 @@ static int cx24116_set_symbolrate(struct cx24116_state* state, u32 rate) return 0; } -static int cx24116_load_firmware (struct dvb_frontend* fe, const struct firmware *fw); +static int cx24116_load_firmware(struct dvb_frontend *fe, + const struct firmware *fw); -static int cx24116_firmware_ondemand(struct dvb_frontend* fe) +static int cx24116_firmware_ondemand(struct dvb_frontend *fe) { struct cx24116_state *state = fe->demodulator_priv; const struct firmware *fw; int ret = 0; - dprintk("%s()\n",__func__); + dprintk("%s()\n", __func__); - if (cx24116_readreg(state, 0x20) > 0) - { + if (cx24116_readreg(state, 0x20) > 0) { if (state->skip_fw_load) return 0; /* Load firmware */ - /* request the firmware, this will block until someone uploads it */ - printk("%s: Waiting for firmware upload (%s)...\n", __func__, CX24116_DEFAULT_FIRMWARE); - ret = request_firmware(&fw, CX24116_DEFAULT_FIRMWARE, &state->i2c->dev); - printk("%s: Waiting for firmware upload(2)...\n", __func__); + /* request the firmware, this will block until loaded */ + printk(KERN_INFO "%s: Waiting for firmware upload (%s)...\n", + __func__, CX24116_DEFAULT_FIRMWARE); + ret = request_firmware(&fw, CX24116_DEFAULT_FIRMWARE, + &state->i2c->dev); + printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n", + __func__); if (ret) { - printk("%s: No firmware uploaded (timeout or file not found?)\n", __func__); + printk(KERN_ERR "%s: No firmware uploaded " + "(timeout or file not found?)\n", __func__); return ret; } - /* Make sure we don't recurse back through here during loading */ + /* Make sure we don't recurse back through here + * during loading */ state->skip_fw_load = 1; ret = cx24116_load_firmware(fe, fw); if (ret) - printk("%s: Writing firmware to device failed\n", __func__); + printk(KERN_ERR "%s: Writing firmware to device failed\n", + __func__); release_firmware(fw); - printk("%s: Firmware upload %s\n", __func__, ret == 0 ? "complete" : "failed"); + printk(KERN_INFO "%s: Firmware upload %s\n", __func__, + ret == 0 ? "complete" : "failed"); /* Ensure firmware is always loaded if required */ state->skip_fw_load = 0; @@ -490,8 +517,10 @@ static int cx24116_firmware_ondemand(struct dvb_frontend* fe) return ret; } -/* Take a basic firmware command structure, format it and forward it for processing */ -static int cx24116_cmd_execute(struct dvb_frontend* fe, struct cx24116_cmd *cmd) +/* Take a basic firmware command structure, format it + * and forward it for processing + */ +static int cx24116_cmd_execute(struct dvb_frontend *fe, struct cx24116_cmd *cmd) { struct cx24116_state *state = fe->demodulator_priv; int i, ret; @@ -499,49 +528,49 @@ static int cx24116_cmd_execute(struct dvb_frontend* fe, struct cx24116_cmd *cmd) dprintk("%s()\n", __func__); /* Load the firmware if required */ - if ( (ret = cx24116_firmware_ondemand(fe)) != 0) - { - printk("%s(): Unable initialise the firmware\n", __func__); + ret = cx24116_firmware_ondemand(fe); + if (ret != 0) { + printk(KERN_ERR "%s(): Unable initialise the firmware\n", + __func__); return ret; } /* Write the command */ - for(i = 0; i < cmd->len ; i++) - { + for (i = 0; i < cmd->len ; i++) { dprintk("%s: 0x%02x == 0x%02x\n", __func__, i, cmd->args[i]); cx24116_writereg(state, i, cmd->args[i]); } /* Start execution and wait for cmd to terminate */ cx24116_writereg(state, CX24116_REG_EXECUTE, 0x01); - while( cx24116_readreg(state, CX24116_REG_EXECUTE) ) - { + while (cx24116_readreg(state, CX24116_REG_EXECUTE)) { msleep(10); - if(i++ > 64) - { - /* Avoid looping forever if the firmware does no respond */ - printk("%s() Firmware not responding\n", __func__); + if (i++ > 64) { + /* Avoid looping forever if the firmware does + not respond */ + printk(KERN_WARNING "%s() Firmware not responding\n", + __func__); return -EREMOTEIO; } } return 0; } -static int cx24116_load_firmware (struct dvb_frontend* fe, const struct firmware *fw) +static int cx24116_load_firmware(struct dvb_frontend *fe, + const struct firmware *fw) { - struct cx24116_state* state = fe->demodulator_priv; + struct cx24116_state *state = fe->demodulator_priv; struct cx24116_cmd cmd; int i, ret; unsigned char vers[4]; dprintk("%s\n", __func__); - dprintk("Firmware is %zu bytes (%02x %02x .. %02x %02x)\n" - ,fw->size - ,fw->data[0] - ,fw->data[1] - ,fw->data[ fw->size-2 ] - ,fw->data[ fw->size-1 ] - ); + dprintk("Firmware is %zu bytes (%02x %02x .. %02x %02x)\n", + fw->size, + fw->data[0], + fw->data[1], + fw->data[fw->size-2], + fw->data[fw->size-1]); /* Toggle 88x SRST pin to reset demod */ if (state->config->reset_device) @@ -587,7 +616,7 @@ static int cx24116_load_firmware (struct dvb_frontend* fe, const struct firmware cmd.args[0x07] = 0x9d; cmd.args[0x08] = 0xfc; cmd.args[0x09] = 0x06; - cmd.len= 0x0a; + cmd.len = 0x0a; ret = cx24116_cmd_execute(fe, &cmd); if (ret != 0) return ret; @@ -598,7 +627,7 @@ static int cx24116_load_firmware (struct dvb_frontend* fe, const struct firmware cmd.args[0x00] = CMD_TUNERINIT; cmd.args[0x01] = 0x00; cmd.args[0x02] = 0x00; - cmd.len= 0x03; + cmd.len = 0x03; ret = cx24116_cmd_execute(fe, &cmd); if (ret != 0) return ret; @@ -615,36 +644,38 @@ static int cx24116_load_firmware (struct dvb_frontend* fe, const struct firmware else cmd.args[0x04] = 0x02; cmd.args[0x05] = 0x00; - cmd.len= 0x06; + cmd.len = 0x06; ret = cx24116_cmd_execute(fe, &cmd); if (ret != 0) return ret; /* Firmware CMD 35: Get firmware version */ cmd.args[0x00] = CMD_UPDFWVERS; - cmd.len= 0x02; - for(i=0; i<4; i++) { + cmd.len = 0x02; + for (i = 0; i < 4; i++) { cmd.args[0x01] = i; ret = cx24116_cmd_execute(fe, &cmd); if (ret != 0) return ret; - vers[i]= cx24116_readreg(state, CX24116_REG_MAILBOX); + vers[i] = cx24116_readreg(state, CX24116_REG_MAILBOX); } - printk("%s: FW version %i.%i.%i.%i\n", __func__, + printk(KERN_INFO "%s: FW version %i.%i.%i.%i\n", __func__, vers[0], vers[1], vers[2], vers[3]); return 0; } -static int cx24116_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) +static int cx24116_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t voltage) { /* The isl6421 module will override this function in the fops. */ - dprintk("%s() This should never appear if the isl6421 module is loaded correctly\n",__func__); + dprintk("%s() This should never appear if the isl6421 module " + "is loaded correctly\n", __func__); return -EOPNOTSUPP; } -static int cx24116_read_status(struct dvb_frontend* fe, fe_status_t* status) +static int cx24116_read_status(struct dvb_frontend *fe, fe_status_t *status) { struct cx24116_state *state = fe->demodulator_priv; @@ -666,22 +697,23 @@ static int cx24116_read_status(struct dvb_frontend* fe, fe_status_t* status) return 0; } -static int cx24116_read_ber(struct dvb_frontend* fe, u32* ber) +static int cx24116_read_ber(struct dvb_frontend *fe, u32 *ber) { struct cx24116_state *state = fe->demodulator_priv; dprintk("%s()\n", __func__); - *ber = ( cx24116_readreg(state, CX24116_REG_BER24) << 24 ) | - ( cx24116_readreg(state, CX24116_REG_BER16) << 16 ) | - ( cx24116_readreg(state, CX24116_REG_BER8 ) << 8 ) | - cx24116_readreg(state, CX24116_REG_BER0 ); + *ber = (cx24116_readreg(state, CX24116_REG_BER24) << 24) | + (cx24116_readreg(state, CX24116_REG_BER16) << 16) | + (cx24116_readreg(state, CX24116_REG_BER8) << 8) | + cx24116_readreg(state, CX24116_REG_BER0); return 0; } /* TODO Determine function and scale appropriately */ -static int cx24116_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength) +static int cx24116_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) { struct cx24116_state *state = fe->demodulator_priv; struct cx24116_cmd cmd; @@ -692,39 +724,43 @@ static int cx24116_read_signal_strength(struct dvb_frontend* fe, u16* signal_str /* Firmware CMD 19: Get AGC */ cmd.args[0x00] = CMD_GETAGC; - cmd.len= 0x01; + cmd.len = 0x01; ret = cx24116_cmd_execute(fe, &cmd); if (ret != 0) return ret; - sig_reading = ( cx24116_readreg(state, CX24116_REG_SSTATUS) & CX24116_SIGNAL_MASK ) | - ( cx24116_readreg(state, CX24116_REG_SIGNAL) << 6 ); - *signal_strength= 0 - sig_reading; + sig_reading = + (cx24116_readreg(state, + CX24116_REG_SSTATUS) & CX24116_SIGNAL_MASK) | + (cx24116_readreg(state, CX24116_REG_SIGNAL) << 6); + *signal_strength = 0 - sig_reading; - dprintk("%s: raw / cooked = 0x%04x / 0x%04x\n", __func__, sig_reading, *signal_strength); + dprintk("%s: raw / cooked = 0x%04x / 0x%04x\n", + __func__, sig_reading, *signal_strength); return 0; } /* SNR (0..100)% = (sig & 0xf0) * 10 + (sig & 0x0f) * 10 / 16 */ -static int cx24116_read_snr_pct(struct dvb_frontend* fe, u16* snr) +static int cx24116_read_snr_pct(struct dvb_frontend *fe, u16 *snr) { struct cx24116_state *state = fe->demodulator_priv; u8 snr_reading; static const u32 snr_tab[] = { /* 10 x Table (rounded up) */ - 0x00000,0x0199A,0x03333,0x04ccD,0x06667, - 0x08000,0x0999A,0x0b333,0x0cccD,0x0e667, - 0x10000,0x1199A,0x13333,0x14ccD,0x16667,0x18000 }; + 0x00000, 0x0199A, 0x03333, 0x04ccD, 0x06667, + 0x08000, 0x0999A, 0x0b333, 0x0cccD, 0x0e667, + 0x10000, 0x1199A, 0x13333, 0x14ccD, 0x16667, + 0x18000 }; dprintk("%s()\n", __func__); snr_reading = cx24116_readreg(state, CX24116_REG_QUALITY0); - if(snr_reading >= 0xa0 /* 100% */) + if (snr_reading >= 0xa0 /* 100% */) *snr = 0xffff; else - *snr = snr_tab [ ( snr_reading & 0xf0 ) >> 4 ] + - ( snr_tab [ ( snr_reading & 0x0f ) ] >> 4 ); + *snr = snr_tab[(snr_reading & 0xf0) >> 4] + + (snr_tab[(snr_reading & 0x0f)] >> 4); dprintk("%s: raw / cooked = 0x%02x / 0x%04x\n", __func__, snr_reading, *snr); @@ -736,7 +772,7 @@ static int cx24116_read_snr_pct(struct dvb_frontend* fe, u16* snr) * ESNO, from 0->30db (values 0->300). We provide this value by * default. */ -static int cx24116_read_snr_esno(struct dvb_frontend* fe, u16* snr) +static int cx24116_read_snr_esno(struct dvb_frontend *fe, u16 *snr) { struct cx24116_state *state = fe->demodulator_priv; @@ -750,7 +786,7 @@ static int cx24116_read_snr_esno(struct dvb_frontend* fe, u16* snr) return 0; } -static int cx24116_read_snr(struct dvb_frontend* fe, u16* snr) +static int cx24116_read_snr(struct dvb_frontend *fe, u16 *snr) { if (esno_snr == 1) return cx24116_read_snr_esno(fe, snr); @@ -758,27 +794,27 @@ static int cx24116_read_snr(struct dvb_frontend* fe, u16* snr) return cx24116_read_snr_pct(fe, snr); } -static int cx24116_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +static int cx24116_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) { struct cx24116_state *state = fe->demodulator_priv; dprintk("%s()\n", __func__); - *ucblocks = ( cx24116_readreg(state, CX24116_REG_UCB8) << 8 ) | + *ucblocks = (cx24116_readreg(state, CX24116_REG_UCB8) << 8) | cx24116_readreg(state, CX24116_REG_UCB0); return 0; } /* Overwrite the current tuning params, we are about to tune */ -static void cx24116_clone_params(struct dvb_frontend* fe) +static void cx24116_clone_params(struct dvb_frontend *fe) { struct cx24116_state *state = fe->demodulator_priv; memcpy(&state->dcur, &state->dnxt, sizeof(state->dcur)); } /* Wait for LNB */ -static int cx24116_wait_for_lnb(struct dvb_frontend* fe) +static int cx24116_wait_for_lnb(struct dvb_frontend *fe) { struct cx24116_state *state = fe->demodulator_priv; int i; @@ -787,7 +823,7 @@ static int cx24116_wait_for_lnb(struct dvb_frontend* fe) cx24116_readreg(state, CX24116_REG_QSTATUS)); /* Wait for up to 300 ms */ - for(i = 0; i < 30 ; i++) { + for (i = 0; i < 30 ; i++) { if (cx24116_readreg(state, CX24116_REG_QSTATUS) & 0x20) return 0; msleep(10); @@ -798,20 +834,21 @@ static int cx24116_wait_for_lnb(struct dvb_frontend* fe) return -ETIMEDOUT; /* -EBUSY ? */ } -static int cx24116_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) +static int cx24116_set_tone(struct dvb_frontend *fe, + fe_sec_tone_mode_t tone) { struct cx24116_cmd cmd; int ret; dprintk("%s(%d)\n", __func__, tone); - if ( (tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF) ) { - printk("%s: Invalid, tone=%d\n", __func__, tone); + if ((tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF)) { + printk(KERN_ERR "%s: Invalid, tone=%d\n", __func__, tone); return -EINVAL; } /* Wait for LNB ready */ ret = cx24116_wait_for_lnb(fe); - if(ret != 0) + if (ret != 0) return ret; /* Min delay time after DiSEqC send */ @@ -820,7 +857,7 @@ static int cx24116_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) /* This is always done before the tone is set */ cmd.args[0x00] = CMD_SET_TONEPRE; cmd.args[0x01] = 0x00; - cmd.len= 0x02; + cmd.len = 0x02; ret = cx24116_cmd_execute(fe, &cmd); if (ret != 0) return ret; @@ -836,11 +873,11 @@ static int cx24116_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) cmd.args[0x03] = 0x01; break; case SEC_TONE_OFF: - dprintk("%s: setting tone off\n",__func__); + dprintk("%s: setting tone off\n", __func__); cmd.args[0x03] = 0x00; break; } - cmd.len= 0x04; + cmd.len = 0x04; /* Min delay time before DiSEqC send */ msleep(15); /* XXX determine is FW does this, see send_diseqc/burst */ @@ -849,7 +886,7 @@ static int cx24116_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) } /* Initialise DiSEqC */ -static int cx24116_diseqc_init(struct dvb_frontend* fe) +static int cx24116_diseqc_init(struct dvb_frontend *fe) { struct cx24116_state *state = fe->demodulator_priv; struct cx24116_cmd cmd; @@ -864,7 +901,7 @@ static int cx24116_diseqc_init(struct dvb_frontend* fe) cmd.args[0x05] = 0x28; cmd.args[0x06] = (toneburst == CX24116_DISEQC_TONEOFF) ? 0x00 : 0x01; cmd.args[0x07] = 0x01; - cmd.len= 0x08; + cmd.len = 0x08; ret = cx24116_cmd_execute(fe, &cmd); if (ret != 0) return ret; @@ -878,36 +915,38 @@ static int cx24116_diseqc_init(struct dvb_frontend* fe) /* Unknown */ state->dsec_cmd.args[CX24116_DISEQC_ARG2_2] = 0x02; state->dsec_cmd.args[CX24116_DISEQC_ARG3_0] = 0x00; - state->dsec_cmd.args[CX24116_DISEQC_ARG4_0] = 0x00; /* Continuation flag? */ + /* Continuation flag? */ + state->dsec_cmd.args[CX24116_DISEQC_ARG4_0] = 0x00; /* DiSEqC message length */ state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] = 0x00; /* Command length */ - state->dsec_cmd.len= CX24116_DISEQC_MSGOFS; + state->dsec_cmd.len = CX24116_DISEQC_MSGOFS; return 0; } /* Send DiSEqC message with derived burst (hack) || previous burst */ -static int cx24116_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *d) +static int cx24116_send_diseqc_msg(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *d) { struct cx24116_state *state = fe->demodulator_priv; int i, ret; /* Dump DiSEqC message */ if (debug) { - printk("cx24116: %s(", __func__); - for(i = 0 ; i < d->msg_len ;) { - printk("0x%02x", d->msg[i]); - if(++i < d->msg_len) - printk(", "); - } + printk(KERN_INFO "cx24116: %s(", __func__); + for (i = 0 ; i < d->msg_len ;) { + printk(KERN_INFO "0x%02x", d->msg[i]); + if (++i < d->msg_len) + printk(KERN_INFO ", "); + } printk(") toneburst=%d\n", toneburst); } /* Validate length */ - if(d->msg_len > (CX24116_ARGLEN - CX24116_DISEQC_MSGOFS)) + if (d->msg_len > (CX24116_ARGLEN - CX24116_DISEQC_MSGOFS)) return -EINVAL; /* DiSEqC message */ @@ -918,18 +957,19 @@ static int cx24116_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_ma state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] = d->msg_len; /* Command length */ - state->dsec_cmd.len= CX24116_DISEQC_MSGOFS + state->dsec_cmd.args[CX24116_DISEQC_MSGLEN]; + state->dsec_cmd.len = CX24116_DISEQC_MSGOFS + + state->dsec_cmd.args[CX24116_DISEQC_MSGLEN]; /* DiSEqC toneburst */ - if(toneburst == CX24116_DISEQC_MESGCACHE) + if (toneburst == CX24116_DISEQC_MESGCACHE) /* Message is cached */ return 0; - else if(toneburst == CX24116_DISEQC_TONEOFF) + else if (toneburst == CX24116_DISEQC_TONEOFF) /* Message is sent without burst */ state->dsec_cmd.args[CX24116_DISEQC_BURST] = 0; - else if(toneburst == CX24116_DISEQC_TONECACHE) { + else if (toneburst == CX24116_DISEQC_TONECACHE) { /* * Message is sent with derived else cached burst * @@ -948,15 +988,17 @@ static int cx24116_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_ma * Y = VOLTAGE (0=13V, 1=18V) * Z = BAND (0=LOW, 1=HIGH(22K)) */ - if(d->msg_len >= 4 && d->msg[2] == 0x38) - state->dsec_cmd.args[CX24116_DISEQC_BURST] = ((d->msg[3] & 4) >> 2); - if(debug) - dprintk("%s burst=%d\n", __func__, state->dsec_cmd.args[CX24116_DISEQC_BURST]); + if (d->msg_len >= 4 && d->msg[2] == 0x38) + state->dsec_cmd.args[CX24116_DISEQC_BURST] = + ((d->msg[3] & 4) >> 2); + if (debug) + dprintk("%s burst=%d\n", __func__, + state->dsec_cmd.args[CX24116_DISEQC_BURST]); } /* Wait for LNB ready */ ret = cx24116_wait_for_lnb(fe); - if(ret != 0) + if (ret != 0) return ret; /* Wait for voltage/min repeat delay */ @@ -964,7 +1006,7 @@ static int cx24116_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_ma /* Command */ ret = cx24116_cmd_execute(fe, &state->dsec_cmd); - if(ret != 0) + if (ret != 0) return ret; /* * Wait for send @@ -976,29 +1018,33 @@ static int cx24116_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_ma * 12.5ms burst + * >15ms delay (XXX determine if FW does this, see set_tone) */ - msleep( (state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) + ((toneburst == CX24116_DISEQC_TONEOFF) ? 30 : 60) ); + msleep((state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) + + ((toneburst == CX24116_DISEQC_TONEOFF) ? 30 : 60)); return 0; } /* Send DiSEqC burst */ -static int cx24116_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst) +static int cx24116_diseqc_send_burst(struct dvb_frontend *fe, + fe_sec_mini_cmd_t burst) { struct cx24116_state *state = fe->demodulator_priv; int ret; - dprintk("%s(%d) toneburst=%d\n",__func__, burst, toneburst); + dprintk("%s(%d) toneburst=%d\n", __func__, burst, toneburst); /* DiSEqC burst */ if (burst == SEC_MINI_A) - state->dsec_cmd.args[CX24116_DISEQC_BURST] = CX24116_DISEQC_MINI_A; - else if(burst == SEC_MINI_B) - state->dsec_cmd.args[CX24116_DISEQC_BURST] = CX24116_DISEQC_MINI_B; + state->dsec_cmd.args[CX24116_DISEQC_BURST] = + CX24116_DISEQC_MINI_A; + else if (burst == SEC_MINI_B) + state->dsec_cmd.args[CX24116_DISEQC_BURST] = + CX24116_DISEQC_MINI_B; else return -EINVAL; /* DiSEqC toneburst */ - if(toneburst != CX24116_DISEQC_MESGCACHE) + if (toneburst != CX24116_DISEQC_MESGCACHE) /* Burst is cached */ return 0; @@ -1006,7 +1052,7 @@ static int cx24116_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t /* Wait for LNB ready */ ret = cx24116_wait_for_lnb(fe); - if(ret != 0) + if (ret != 0) return ret; /* Wait for voltage/min repeat delay */ @@ -1014,7 +1060,7 @@ static int cx24116_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t /* Command */ ret = cx24116_cmd_execute(fe, &state->dsec_cmd); - if(ret != 0) + if (ret != 0) return ret; /* @@ -1027,34 +1073,32 @@ static int cx24116_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t * 12.5ms burst + * >15ms delay (XXX determine if FW does this, see set_tone) */ - msleep( (state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) + 60 ); + msleep((state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) + 60); return 0; } -static void cx24116_release(struct dvb_frontend* fe) +static void cx24116_release(struct dvb_frontend *fe) { - struct cx24116_state* state = fe->demodulator_priv; - dprintk("%s\n",__func__); + struct cx24116_state *state = fe->demodulator_priv; + dprintk("%s\n", __func__); kfree(state); } static struct dvb_frontend_ops cx24116_ops; -struct dvb_frontend* cx24116_attach(const struct cx24116_config* config, - struct i2c_adapter* i2c) +struct dvb_frontend *cx24116_attach(const struct cx24116_config *config, + struct i2c_adapter *i2c) { - struct cx24116_state* state = NULL; + struct cx24116_state *state = NULL; int ret; - dprintk("%s\n",__func__); + dprintk("%s\n", __func__); /* allocate memory for the internal state */ state = kmalloc(sizeof(struct cx24116_state), GFP_KERNEL); - if (state == NULL) { - printk("Unable to kmalloc\n"); + if (state == NULL) goto error1; - } /* setup the state */ memset(state, 0, sizeof(struct cx24116_state)); @@ -1063,32 +1107,36 @@ struct dvb_frontend* cx24116_attach(const struct cx24116_config* config, state->i2c = i2c; /* check if the demod is present */ - ret = (cx24116_readreg(state, 0xFF) << 8) | cx24116_readreg(state, 0xFE); + ret = (cx24116_readreg(state, 0xFF) << 8) | + cx24116_readreg(state, 0xFE); if (ret != 0x0501) { - printk("Invalid probe, probably not a CX24116 device\n"); + printk(KERN_INFO "Invalid probe, probably not a CX24116 device\n"); goto error2; } /* create dvb_frontend */ - memcpy(&state->frontend.ops, &cx24116_ops, sizeof(struct dvb_frontend_ops)); + memcpy(&state->frontend.ops, &cx24116_ops, + sizeof(struct dvb_frontend_ops)); state->frontend.demodulator_priv = state; return &state->frontend; error2: kfree(state); error1: return NULL; } +EXPORT_SYMBOL(cx24116_attach); + /* * Initialise or wake up device * * Power config will reset and load initial firmware if required */ -static int cx24116_initfe(struct dvb_frontend* fe) +static int cx24116_initfe(struct dvb_frontend *fe) { - struct cx24116_state* state = fe->demodulator_priv; + struct cx24116_state *state = fe->demodulator_priv; struct cx24116_cmd cmd; int ret; - dprintk("%s()\n",__func__); + dprintk("%s()\n", __func__); /* Power on */ cx24116_writereg(state, 0xe0, 0); @@ -1098,9 +1146,9 @@ static int cx24116_initfe(struct dvb_frontend* fe) /* Firmware CMD 36: Power config */ cmd.args[0x00] = CMD_TUNERSLEEP; cmd.args[0x01] = 0; - cmd.len= 0x02; + cmd.len = 0x02; ret = cx24116_cmd_execute(fe, &cmd); - if(ret != 0) + if (ret != 0) return ret; return cx24116_diseqc_init(fe); @@ -1109,20 +1157,20 @@ static int cx24116_initfe(struct dvb_frontend* fe) /* * Put device to sleep */ -static int cx24116_sleep(struct dvb_frontend* fe) +static int cx24116_sleep(struct dvb_frontend *fe) { - struct cx24116_state* state = fe->demodulator_priv; + struct cx24116_state *state = fe->demodulator_priv; struct cx24116_cmd cmd; int ret; - dprintk("%s()\n",__func__); + dprintk("%s()\n", __func__); /* Firmware CMD 36: Power config */ cmd.args[0x00] = CMD_TUNERSLEEP; cmd.args[0x01] = 1; - cmd.len= 0x02; + cmd.len = 0x02; ret = cx24116_cmd_execute(fe, &cmd); - if(ret != 0) + if (ret != 0) return ret; /* Power off (Shutdown clocks) */ @@ -1133,13 +1181,15 @@ static int cx24116_sleep(struct dvb_frontend* fe) return 0; } -static int cx24116_set_property(struct dvb_frontend *fe, struct dtv_property* tvp) +static int cx24116_set_property(struct dvb_frontend *fe, + struct dtv_property *tvp) { dprintk("%s(..)\n", __func__); return 0; } -static int cx24116_get_property(struct dvb_frontend *fe, struct dtv_property* tvp) +static int cx24116_get_property(struct dvb_frontend *fe, + struct dtv_property *tvp) { dprintk("%s(..)\n", __func__); return 0; @@ -1148,7 +1198,8 @@ static int cx24116_get_property(struct dvb_frontend *fe, struct dtv_property* tv /* dvb-core told us to tune, the tv property cache will be complete, * it's safe for is to pull values and use them for tuning purposes. */ -static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) +static int cx24116_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) { struct cx24116_state *state = fe->demodulator_priv; struct dtv_frontend_properties *c = &fe->dtv_property_cache; @@ -1156,96 +1207,102 @@ static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par fe_status_t tunerstat; int i, status, ret, retune; - dprintk("%s()\n",__func__); + dprintk("%s()\n", __func__); - switch(c->delivery_system) { - case SYS_DVBS: - dprintk("%s: DVB-S delivery system selected\n",__func__); + switch (c->delivery_system) { + case SYS_DVBS: + dprintk("%s: DVB-S delivery system selected\n", __func__); - /* Only QPSK is supported for DVB-S */ - if(c->modulation != QPSK) { - dprintk("%s: unsupported modulation selected (%d)\n", - __func__, c->modulation); - return -EOPNOTSUPP; - } + /* Only QPSK is supported for DVB-S */ + if (c->modulation != QPSK) { + dprintk("%s: unsupported modulation selected (%d)\n", + __func__, c->modulation); + return -EOPNOTSUPP; + } - /* Pilot doesn't exist in DVB-S, turn bit off */ - state->dnxt.pilot_val = CX24116_PILOT_OFF; - retune = 1; + /* Pilot doesn't exist in DVB-S, turn bit off */ + state->dnxt.pilot_val = CX24116_PILOT_OFF; + retune = 1; - /* DVB-S only supports 0.35 */ - if(c->rolloff != ROLLOFF_35) { - dprintk("%s: unsupported rolloff selected (%d)\n", - __func__, c->rolloff); - return -EOPNOTSUPP; - } - state->dnxt.rolloff_val = CX24116_ROLLOFF_035; - break; + /* DVB-S only supports 0.35 */ + if (c->rolloff != ROLLOFF_35) { + dprintk("%s: unsupported rolloff selected (%d)\n", + __func__, c->rolloff); + return -EOPNOTSUPP; + } + state->dnxt.rolloff_val = CX24116_ROLLOFF_035; + break; - case SYS_DVBS2: - dprintk("%s: DVB-S2 delivery system selected\n",__func__); - - /* - * NBC 8PSK/QPSK with DVB-S is supported for DVB-S2, - * but not hardware auto detection - */ - if(c->modulation != PSK_8 && c->modulation != QPSK) { - dprintk("%s: unsupported modulation selected (%d)\n", - __func__, c->modulation); - return -EOPNOTSUPP; - } + case SYS_DVBS2: + dprintk("%s: DVB-S2 delivery system selected\n", __func__); - switch(c->pilot) { - case PILOT_AUTO: /* Not supported but emulated */ - retune = 2; /* Fall-through */ - case PILOT_OFF: - state->dnxt.pilot_val = CX24116_PILOT_OFF; - break; - case PILOT_ON: - state->dnxt.pilot_val = CX24116_PILOT_ON; - break; - default: - dprintk("%s: unsupported pilot mode selected (%d)\n", - __func__, c->pilot); - return -EOPNOTSUPP; - } + /* + * NBC 8PSK/QPSK with DVB-S is supported for DVB-S2, + * but not hardware auto detection + */ + if (c->modulation != PSK_8 && c->modulation != QPSK) { + dprintk("%s: unsupported modulation selected (%d)\n", + __func__, c->modulation); + return -EOPNOTSUPP; + } - switch(c->rolloff) { - case ROLLOFF_20: - state->dnxt.rolloff_val= CX24116_ROLLOFF_020; - break; - case ROLLOFF_25: - state->dnxt.rolloff_val= CX24116_ROLLOFF_025; - break; - case ROLLOFF_35: - state->dnxt.rolloff_val= CX24116_ROLLOFF_035; - break; - case ROLLOFF_AUTO: /* Rolloff must be explicit */ - default: - dprintk("%s: unsupported rolloff selected (%d)\n", - __func__, c->rolloff); - return -EOPNOTSUPP; - } + switch (c->pilot) { + case PILOT_AUTO: /* Not supported but emulated */ + state->dnxt.pilot_val = (c->modulation == QPSK) + ? CX24116_PILOT_OFF : CX24116_PILOT_ON; + retune = 2; + break; + case PILOT_OFF: + state->dnxt.pilot_val = CX24116_PILOT_OFF; + break; + case PILOT_ON: + state->dnxt.pilot_val = CX24116_PILOT_ON; break; + default: + dprintk("%s: unsupported pilot mode selected (%d)\n", + __func__, c->pilot); + return -EOPNOTSUPP; + } + switch (c->rolloff) { + case ROLLOFF_20: + state->dnxt.rolloff_val = CX24116_ROLLOFF_020; + break; + case ROLLOFF_25: + state->dnxt.rolloff_val = CX24116_ROLLOFF_025; + break; + case ROLLOFF_35: + state->dnxt.rolloff_val = CX24116_ROLLOFF_035; + break; + case ROLLOFF_AUTO: /* Rolloff must be explicit */ default: - dprintk("%s: unsupported delivery system selected (%d)\n", - __func__, c->delivery_system); + dprintk("%s: unsupported rolloff selected (%d)\n", + __func__, c->rolloff); return -EOPNOTSUPP; + } + break; + + default: + dprintk("%s: unsupported delivery system selected (%d)\n", + __func__, c->delivery_system); + return -EOPNOTSUPP; } state->dnxt.modulation = c->modulation; state->dnxt.frequency = c->frequency; state->dnxt.pilot = c->pilot; state->dnxt.rolloff = c->rolloff; - if ((ret = cx24116_set_inversion(state, c->inversion)) != 0) + ret = cx24116_set_inversion(state, c->inversion); + if (ret != 0) return ret; /* FEC_NONE/AUTO for DVB-S2 is not supported and detected here */ - if ((ret = cx24116_set_fec(state, c->modulation, c->fec_inner)) != 0) + ret = cx24116_set_fec(state, c->modulation, c->fec_inner); + if (ret != 0) return ret; - if ((ret = cx24116_set_symbolrate(state, c->symbol_rate)) != 0) + ret = cx24116_set_symbolrate(state, c->symbol_rate); + if (ret != 0) return ret; /* discard the 'current' tuning parameters and prepare to tune */ @@ -1271,7 +1328,7 @@ static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par /* Set/Reset B/W */ cmd.args[0x00] = CMD_BANDWIDTH; cmd.args[0x01] = 0x01; - cmd.len= 0x02; + cmd.len = 0x02; ret = cx24116_cmd_execute(fe, &cmd); if (ret != 0) return ret; @@ -1319,7 +1376,7 @@ static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par cx24116_writereg(state, CX24116_REG_RATEDIV, 0x00); } - cmd.len= 0x13; + cmd.len = 0x13; /* We need to support pilot and non-pilot tuning in the * driver automatically. This is a workaround for because @@ -1327,12 +1384,13 @@ static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par */ do { /* Reset status register */ - status = cx24116_readreg(state, CX24116_REG_SSTATUS) & CX24116_SIGNAL_MASK; + status = cx24116_readreg(state, CX24116_REG_SSTATUS) + & CX24116_SIGNAL_MASK; cx24116_writereg(state, CX24116_REG_SSTATUS, status); /* Tune */ ret = cx24116_cmd_execute(fe, &cmd); - if( ret != 0 ) + if (ret != 0) break; /* @@ -1341,28 +1399,27 @@ static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par * If we are able to tune then generally it occurs within 100ms. * If it takes longer, try a different toneburst setting. */ - for(i = 0; i < 50 ; i++) { + for (i = 0; i < 50 ; i++) { cx24116_read_status(fe, &tunerstat); status = tunerstat & (FE_HAS_SIGNAL | FE_HAS_SYNC); - if(status == (FE_HAS_SIGNAL | FE_HAS_SYNC)) { - dprintk("%s: Tuned\n",__func__); + if (status == (FE_HAS_SIGNAL | FE_HAS_SYNC)) { + dprintk("%s: Tuned\n", __func__); goto tuned; } msleep(10); } - dprintk("%s: Not tuned\n",__func__); + dprintk("%s: Not tuned\n", __func__); /* Toggle pilot bit when in auto-pilot */ - if(state->dcur.pilot == PILOT_AUTO) + if (state->dcur.pilot == PILOT_AUTO) cmd.args[0x07] ^= CX24116_PILOT_ON; - } - while(--retune); + } while (--retune); tuned: /* Set/Reset B/W */ cmd.args[0x00] = CMD_BANDWIDTH; cmd.args[0x01] = 0x00; - cmd.len= 0x02; + cmd.len = 0x02; ret = cx24116_cmd_execute(fe, &cmd); if (ret != 0) return ret; @@ -1407,17 +1464,7 @@ static struct dvb_frontend_ops cx24116_ops = { .set_frontend = cx24116_set_frontend, }; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); - -module_param(toneburst, int, 0644); -MODULE_PARM_DESC(toneburst, "DiSEqC toneburst 0=OFF, 1=TONE CACHE, 2=MESSAGE CACHE (default:1)"); - -module_param(esno_snr, int, 0644); -MODULE_PARM_DESC(debug, "SNR return units, 0=PERCENTAGE 0-100, 1=ESNO(db * 10) (default:0)"); - MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24116/cx24118 hardware"); MODULE_AUTHOR("Steven Toth"); MODULE_LICENSE("GPL"); -EXPORT_SYMBOL(cx24116_attach); diff --git a/drivers/media/dvb/frontends/cx24116.h b/drivers/media/dvb/frontends/cx24116.h index 8dbcec268394..4cb3ddd6c626 100644 --- a/drivers/media/dvb/frontends/cx24116.h +++ b/drivers/media/dvb/frontends/cx24116.h @@ -23,31 +23,32 @@ #include <linux/dvb/frontend.h> -struct cx24116_config -{ +struct cx24116_config { /* the demodulator's i2c address */ u8 demod_address; /* Need to set device param for start_dma */ - int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured); + int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured); /* Need to reset device during firmware loading */ - int (*reset_device)(struct dvb_frontend* fe); + int (*reset_device)(struct dvb_frontend *fe); /* Need to set MPEG parameters */ u8 mpg_clk_pos_pol:0x02; }; #if defined(CONFIG_DVB_CX24116) || defined(CONFIG_DVB_CX24116_MODULE) -extern struct dvb_frontend* cx24116_attach(const struct cx24116_config* config, - struct i2c_adapter* i2c); +extern struct dvb_frontend *cx24116_attach( + const struct cx24116_config *config, + struct i2c_adapter *i2c); #else -static inline struct dvb_frontend* cx24116_attach(const struct cx24116_config* config, - struct i2c_adapter* i2c) +static inline struct dvb_frontend *cx24116_attach( + const struct cx24116_config *config, + struct i2c_adapter *i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } -#endif // CONFIG_DVB_CX24116 +#endif #endif /* CX24116_H */ diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c index 7156157cb34b..1a8c36f76061 100644 --- a/drivers/media/dvb/frontends/cx24123.c +++ b/drivers/media/dvb/frontends/cx24123.c @@ -33,7 +33,13 @@ #define XTAL 10111000 static int force_band; +module_param(force_band, int, 0644); +MODULE_PARM_DESC(force_band, "Force a specific band select "\ + "(1-9, default:off)."); + static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); #define info(args...) do { printk(KERN_INFO "CX24123: " args); } while (0) #define err(args...) do { printk(KERN_ERR "CX24123: " args); } while (0) @@ -46,10 +52,9 @@ static int debug; } \ } while (0) -struct cx24123_state -{ - struct i2c_adapter* i2c; - const struct cx24123_config* config; +struct cx24123_state { + struct i2c_adapter *i2c; + const struct cx24123_config *config; struct dvb_frontend frontend; @@ -70,8 +75,7 @@ struct cx24123_state }; /* Various tuner defaults need to be established for a given symbol rate Sps */ -static struct -{ +static struct cx24123_AGC_val { u32 symbolrate_low; u32 symbolrate_high; u32 VCAprogdata; @@ -109,8 +113,7 @@ static struct * fixme: The bounds on the bands do not match the doc in real life. * fixme: Some of them have been moved, other might need adjustment. */ -static struct -{ +static struct cx24123_bandselect_val { u32 freq_low; u32 freq_high; u32 VCOdivider; @@ -249,7 +252,8 @@ static int cx24123_i2c_writereg(struct cx24123_state *state, /* printk(KERN_DEBUG "wr(%02x): %02x %02x\n", i2c_addr, reg, data); */ - if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { + err = i2c_transfer(state->i2c, &msg, 1); + if (err != 1) { printk("%s: writereg error(err == %i, reg == 0x%02x," " data == 0x%02x)\n", __func__, err, reg, data); return err; @@ -284,7 +288,8 @@ static int cx24123_i2c_readreg(struct cx24123_state *state, u8 i2c_addr, u8 reg) #define cx24123_writereg(state, reg, val) \ cx24123_i2c_writereg(state, state->config->demod_address, reg, val) -static int cx24123_set_inversion(struct cx24123_state* state, fe_spectral_inversion_t inversion) +static int cx24123_set_inversion(struct cx24123_state *state, + fe_spectral_inversion_t inversion) { u8 nom_reg = cx24123_readreg(state, 0x0e); u8 auto_reg = cx24123_readreg(state, 0x10); @@ -311,7 +316,8 @@ static int cx24123_set_inversion(struct cx24123_state* state, fe_spectral_invers return 0; } -static int cx24123_get_inversion(struct cx24123_state* state, fe_spectral_inversion_t *inversion) +static int cx24123_get_inversion(struct cx24123_state *state, + fe_spectral_inversion_t *inversion) { u8 val; @@ -328,18 +334,20 @@ static int cx24123_get_inversion(struct cx24123_state* state, fe_spectral_invers return 0; } -static int cx24123_set_fec(struct cx24123_state* state, fe_code_rate_t fec) +static int cx24123_set_fec(struct cx24123_state *state, fe_code_rate_t fec) { u8 nom_reg = cx24123_readreg(state, 0x0e) & ~0x07; - if ( (fec < FEC_NONE) || (fec > FEC_AUTO) ) + if ((fec < FEC_NONE) || (fec > FEC_AUTO)) fec = FEC_AUTO; /* Set the soft decision threshold */ - if(fec == FEC_1_2) - cx24123_writereg(state, 0x43, cx24123_readreg(state, 0x43) | 0x01); + if (fec == FEC_1_2) + cx24123_writereg(state, 0x43, + cx24123_readreg(state, 0x43) | 0x01); else - cx24123_writereg(state, 0x43, cx24123_readreg(state, 0x43) & ~0x01); + cx24123_writereg(state, 0x43, + cx24123_readreg(state, 0x43) & ~0x01); switch (fec) { case FEC_1_2: @@ -388,11 +396,11 @@ static int cx24123_set_fec(struct cx24123_state* state, fe_code_rate_t fec) return 0; } -static int cx24123_get_fec(struct cx24123_state* state, fe_code_rate_t *fec) +static int cx24123_get_fec(struct cx24123_state *state, fe_code_rate_t *fec) { int ret; - ret = cx24123_readreg (state, 0x1b); + ret = cx24123_readreg(state, 0x1b); if (ret < 0) return ret; ret = ret & 0x07; @@ -433,16 +441,16 @@ static u32 cx24123_int_log2(u32 a, u32 b) { u32 exp, nearest = 0; u32 div = a / b; - if(a % b >= b / 2) ++div; - if(div < (1 << 31)) - { - for(exp = 1; div > exp; nearest++) + if (a % b >= b / 2) + ++div; + if (div < (1 << 31)) { + for (exp = 1; div > exp; nearest++) exp += exp; } return nearest; } -static int cx24123_set_symbolrate(struct cx24123_state* state, u32 srate) +static int cx24123_set_symbolrate(struct cx24123_state *state, u32 srate) { u32 tmp, sample_rate, ratio, sample_gain; u8 pll_mult; @@ -498,9 +506,9 @@ static int cx24123_set_symbolrate(struct cx24123_state* state, u32 srate) cx24123_writereg(state, 0x01, pll_mult * 6); - cx24123_writereg(state, 0x08, (ratio >> 16) & 0x3f ); - cx24123_writereg(state, 0x09, (ratio >> 8) & 0xff ); - cx24123_writereg(state, 0x0a, (ratio ) & 0xff ); + cx24123_writereg(state, 0x08, (ratio >> 16) & 0x3f); + cx24123_writereg(state, 0x09, (ratio >> 8) & 0xff); + cx24123_writereg(state, 0x0a, ratio & 0xff); /* also set the demodulator sample gain */ sample_gain = cx24123_int_log2(sample_rate, srate); @@ -514,10 +522,12 @@ static int cx24123_set_symbolrate(struct cx24123_state* state, u32 srate) } /* - * Based on the required frequency and symbolrate, the tuner AGC has to be configured - * and the correct band selected. Calculate those values + * Based on the required frequency and symbolrate, the tuner AGC has + * to be configured and the correct band selected. + * Calculate those values. */ -static int cx24123_pll_calculate(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) +static int cx24123_pll_calculate(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) { struct cx24123_state *state = fe->demodulator_priv; u32 ndiv = 0, adiv = 0, vco_div = 0; @@ -525,6 +535,8 @@ static int cx24123_pll_calculate(struct dvb_frontend* fe, struct dvb_frontend_pa int pump = 2; int band = 0; int num_bands = ARRAY_SIZE(cx24123_bandselect_vals); + struct cx24123_bandselect_val *bsv = NULL; + struct cx24123_AGC_val *agcv = NULL; /* Defaults for low freq, low rate */ state->VCAarg = cx24123_AGC_vals[0].VCAprogdata; @@ -532,58 +544,65 @@ static int cx24123_pll_calculate(struct dvb_frontend* fe, struct dvb_frontend_pa state->bandselectarg = cx24123_bandselect_vals[0].progdata; vco_div = cx24123_bandselect_vals[0].VCOdivider; - /* For the given symbol rate, determine the VCA, VGA and FILTUNE programming bits */ - for (i = 0; i < ARRAY_SIZE(cx24123_AGC_vals); i++) - { - if ((cx24123_AGC_vals[i].symbolrate_low <= p->u.qpsk.symbol_rate) && - (cx24123_AGC_vals[i].symbolrate_high >= p->u.qpsk.symbol_rate) ) { - state->VCAarg = cx24123_AGC_vals[i].VCAprogdata; - state->VGAarg = cx24123_AGC_vals[i].VGAprogdata; - state->FILTune = cx24123_AGC_vals[i].FILTune; + /* For the given symbol rate, determine the VCA, VGA and + * FILTUNE programming bits */ + for (i = 0; i < ARRAY_SIZE(cx24123_AGC_vals); i++) { + agcv = &cx24123_AGC_vals[i]; + if ((agcv->symbolrate_low <= p->u.qpsk.symbol_rate) && + (agcv->symbolrate_high >= p->u.qpsk.symbol_rate)) { + state->VCAarg = agcv->VCAprogdata; + state->VGAarg = agcv->VGAprogdata; + state->FILTune = agcv->FILTune; } } /* determine the band to use */ - if(force_band < 1 || force_band > num_bands) - { - for (i = 0; i < num_bands; i++) - { - if ((cx24123_bandselect_vals[i].freq_low <= p->frequency) && - (cx24123_bandselect_vals[i].freq_high >= p->frequency) ) + if (force_band < 1 || force_band > num_bands) { + for (i = 0; i < num_bands; i++) { + bsv = &cx24123_bandselect_vals[i]; + if ((bsv->freq_low <= p->frequency) && + (bsv->freq_high >= p->frequency)) band = i; } - } - else + } else band = force_band - 1; state->bandselectarg = cx24123_bandselect_vals[band].progdata; vco_div = cx24123_bandselect_vals[band].VCOdivider; /* determine the charge pump current */ - if ( p->frequency < (cx24123_bandselect_vals[band].freq_low + cx24123_bandselect_vals[band].freq_high)/2 ) + if (p->frequency < (cx24123_bandselect_vals[band].freq_low + + cx24123_bandselect_vals[band].freq_high) / 2) pump = 0x01; else pump = 0x02; /* Determine the N/A dividers for the requested lband freq (in kHz). */ - /* Note: the reference divider R=10, frequency is in KHz, XTAL is in Hz */ - ndiv = ( ((p->frequency * vco_div * 10) / (2 * XTAL / 1000)) / 32) & 0x1ff; - adiv = ( ((p->frequency * vco_div * 10) / (2 * XTAL / 1000)) % 32) & 0x1f; + /* Note: the reference divider R=10, frequency is in KHz, + * XTAL is in Hz */ + ndiv = (((p->frequency * vco_div * 10) / + (2 * XTAL / 1000)) / 32) & 0x1ff; + adiv = (((p->frequency * vco_div * 10) / + (2 * XTAL / 1000)) % 32) & 0x1f; if (adiv == 0 && ndiv > 0) ndiv--; - /* control bits 11, refdiv 11, charge pump polarity 1, charge pump current, ndiv, adiv */ - state->pllarg = (3 << 19) | (3 << 17) | (1 << 16) | (pump << 14) | (ndiv << 5) | adiv; + /* control bits 11, refdiv 11, charge pump polarity 1, + * charge pump current, ndiv, adiv */ + state->pllarg = (3 << 19) | (3 << 17) | (1 << 16) | + (pump << 14) | (ndiv << 5) | adiv; return 0; } /* * Tuner data is 21 bits long, must be left-aligned in data. - * Tuner cx24109 is written through a dedicated 3wire interface on the demod chip. + * Tuner cx24109 is written through a dedicated 3wire interface + * on the demod chip. */ -static int cx24123_pll_writereg(struct dvb_frontend* fe, struct dvb_frontend_parameters *p, u32 data) +static int cx24123_pll_writereg(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p, u32 data) { struct cx24123_state *state = fe->demodulator_priv; unsigned long timeout; @@ -610,7 +629,7 @@ static int cx24123_pll_writereg(struct dvb_frontend* fe, struct dvb_frontend_par /* send another 8 bytes, wait for the send to be completed */ timeout = jiffies + msecs_to_jiffies(40); - cx24123_writereg(state, 0x22, (data>>8) & 0xff ); + cx24123_writereg(state, 0x22, (data >> 8) & 0xff); while ((cx24123_readreg(state, 0x20) & 0x40) == 0) { if (time_after(jiffies, timeout)) { err("%s: demodulator is not responding, "\ @@ -620,9 +639,10 @@ static int cx24123_pll_writereg(struct dvb_frontend* fe, struct dvb_frontend_par msleep(10); } - /* send the lower 5 bits of this byte, padded with 3 LBB, wait for the send to be completed */ + /* send the lower 5 bits of this byte, padded with 3 LBB, + * wait for the send to be completed */ timeout = jiffies + msecs_to_jiffies(40); - cx24123_writereg(state, 0x22, (data) & 0xff ); + cx24123_writereg(state, 0x22, (data) & 0xff); while ((cx24123_readreg(state, 0x20) & 0x80)) { if (time_after(jiffies, timeout)) { err("%s: demodulator is not responding," \ @@ -639,7 +659,8 @@ static int cx24123_pll_writereg(struct dvb_frontend* fe, struct dvb_frontend_par return 0; } -static int cx24123_pll_tune(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) +static int cx24123_pll_tune(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) { struct cx24123_state *state = fe->demodulator_priv; u8 val; @@ -690,7 +711,7 @@ static int cx24123_repeater_mode(struct cx24123_state *state, u8 mode, u8 start) return cx24123_writereg(state, 0x23, r); } -static int cx24123_initfe(struct dvb_frontend* fe) +static int cx24123_initfe(struct dvb_frontend *fe) { struct cx24123_state *state = fe->demodulator_priv; int i; @@ -699,19 +720,22 @@ static int cx24123_initfe(struct dvb_frontend* fe) /* Configure the demod to a good set of defaults */ for (i = 0; i < ARRAY_SIZE(cx24123_regdata); i++) - cx24123_writereg(state, cx24123_regdata[i].reg, cx24123_regdata[i].data); + cx24123_writereg(state, cx24123_regdata[i].reg, + cx24123_regdata[i].data); /* Set the LNB polarity */ - if(state->config->lnb_polarity) - cx24123_writereg(state, 0x32, cx24123_readreg(state, 0x32) | 0x02); + if (state->config->lnb_polarity) + cx24123_writereg(state, 0x32, + cx24123_readreg(state, 0x32) | 0x02); if (state->config->dont_use_pll) - cx24123_repeater_mode(state, 1, 0); + cx24123_repeater_mode(state, 1, 0); return 0; } -static int cx24123_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) +static int cx24123_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t voltage) { struct cx24123_state *state = fe->demodulator_priv; u8 val; @@ -740,7 +764,7 @@ static void cx24123_wait_for_diseqc(struct cx24123_state *state) { unsigned long timeout = jiffies + msecs_to_jiffies(200); while (!(cx24123_readreg(state, 0x29) & 0x40)) { - if(time_after(jiffies, timeout)) { + if (time_after(jiffies, timeout)) { err("%s: diseqc queue not ready, " \ "command may be lost.\n", __func__); break; @@ -749,7 +773,8 @@ static void cx24123_wait_for_diseqc(struct cx24123_state *state) } } -static int cx24123_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *cmd) +static int cx24123_send_diseqc_msg(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *cmd) { struct cx24123_state *state = fe->demodulator_priv; int i, val, tone; @@ -771,20 +796,21 @@ static int cx24123_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_ma cx24123_writereg(state, 0x2C + i, cmd->msg[i]); val = cx24123_readreg(state, 0x29); - cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40) | ((cmd->msg_len-3) & 3)); + cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40) | + ((cmd->msg_len-3) & 3)); /* wait for diseqc message to finish sending */ cx24123_wait_for_diseqc(state); /* restart continuous tone if enabled */ - if (tone & 0x10) { + if (tone & 0x10) cx24123_writereg(state, 0x29, tone & ~0x40); - } return 0; } -static int cx24123_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst) +static int cx24123_diseqc_send_burst(struct dvb_frontend *fe, + fe_sec_mini_cmd_t burst) { struct cx24123_state *state = fe->demodulator_priv; int val, tone; @@ -814,13 +840,13 @@ static int cx24123_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t cx24123_writereg(state, 0x2a, cx24123_readreg(state, 0x2a) & 0xfb); /* restart continuous tone if enabled */ - if (tone & 0x10) { + if (tone & 0x10) cx24123_writereg(state, 0x29, tone & ~0x40); - } + return 0; } -static int cx24123_read_status(struct dvb_frontend* fe, fe_status_t* status) +static int cx24123_read_status(struct dvb_frontend *fe, fe_status_t *status) { struct cx24123_state *state = fe->demodulator_priv; int sync = cx24123_readreg(state, 0x14); @@ -853,8 +879,9 @@ static int cx24123_read_status(struct dvb_frontend* fe, fe_status_t* status) } /* - * Configured to return the measurement of errors in blocks, because no UCBLOCKS value - * is available, so this value doubles up to satisfy both measurements + * Configured to return the measurement of errors in blocks, + * because no UCBLOCKS value is available, so this value doubles up + * to satisfy both measurements. */ static int cx24123_read_ber(struct dvb_frontend *fe, u32 *ber) { @@ -876,7 +903,8 @@ static int cx24123_read_signal_strength(struct dvb_frontend *fe, { struct cx24123_state *state = fe->demodulator_priv; - *signal_strength = cx24123_readreg(state, 0x3b) << 8; /* larger = better */ + /* larger = better */ + *signal_strength = cx24123_readreg(state, 0x3b) << 8; dprintk("Signal strength = %d\n", *signal_strength); @@ -907,7 +935,7 @@ static int cx24123_set_frontend(struct dvb_frontend *fe, if (state->config->set_ts_params) state->config->set_ts_params(fe, 0); - state->currentfreq=p->frequency; + state->currentfreq = p->frequency; state->currentsymbolrate = p->u.qpsk.symbol_rate; cx24123_set_inversion(state, p->inversion); @@ -932,7 +960,8 @@ static int cx24123_set_frontend(struct dvb_frontend *fe, return 0; } -static int cx24123_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) +static int cx24123_get_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) { struct cx24123_state *state = fe->demodulator_priv; @@ -952,7 +981,7 @@ static int cx24123_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_par return 0; } -static int cx24123_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) +static int cx24123_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) { struct cx24123_state *state = fe->demodulator_priv; u8 val; @@ -977,8 +1006,8 @@ static int cx24123_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) return 0; } -static int cx24123_tune(struct dvb_frontend* fe, - struct dvb_frontend_parameters* params, +static int cx24123_tune(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params, unsigned int mode_flags, unsigned int *delay, fe_status_t *status) @@ -997,12 +1026,12 @@ static int cx24123_tune(struct dvb_frontend* fe, static int cx24123_get_algo(struct dvb_frontend *fe) { - return 1; //FE_ALGO_HW + return 1; /* FE_ALGO_HW */ } -static void cx24123_release(struct dvb_frontend* fe) +static void cx24123_release(struct dvb_frontend *fe) { - struct cx24123_state* state = fe->demodulator_priv; + struct cx24123_state *state = fe->demodulator_priv; dprintk("\n"); i2c_del_adapter(&state->tuner_i2c_adapter); kfree(state); @@ -1013,7 +1042,7 @@ static int cx24123_tuner_i2c_tuner_xfer(struct i2c_adapter *i2c_adap, { struct cx24123_state *state = i2c_get_adapdata(i2c_adap); /* this repeater closes after the first stop */ - cx24123_repeater_mode(state, 1, 1); + cx24123_repeater_mode(state, 1, 1); return i2c_transfer(state->i2c, msg, num); } @@ -1037,8 +1066,8 @@ EXPORT_SYMBOL(cx24123_get_tuner_i2c_adapter); static struct dvb_frontend_ops cx24123_ops; -struct dvb_frontend* cx24123_attach(const struct cx24123_config* config, - struct i2c_adapter* i2c) +struct dvb_frontend *cx24123_attach(const struct cx24123_config *config, + struct i2c_adapter *i2c) { struct cx24123_state *state = kzalloc(sizeof(struct cx24123_state), GFP_KERNEL); @@ -1057,20 +1086,25 @@ struct dvb_frontend* cx24123_attach(const struct cx24123_config* config, /* check if the demod is there */ state->demod_rev = cx24123_readreg(state, 0x00); switch (state->demod_rev) { - case 0xe1: info("detected CX24123C\n"); break; - case 0xd1: info("detected CX24123\n"); break; + case 0xe1: + info("detected CX24123C\n"); + break; + case 0xd1: + info("detected CX24123\n"); + break; default: err("wrong demod revision: %x\n", state->demod_rev); goto error; } /* create dvb_frontend */ - memcpy(&state->frontend.ops, &cx24123_ops, sizeof(struct dvb_frontend_ops)); + memcpy(&state->frontend.ops, &cx24123_ops, + sizeof(struct dvb_frontend_ops)); state->frontend.demodulator_priv = state; - /* create tuner i2c adapter */ - if (config->dont_use_pll) - cx24123_repeater_mode(state, 1, 0); + /* create tuner i2c adapter */ + if (config->dont_use_pll) + cx24123_repeater_mode(state, 1, 0); strlcpy(state->tuner_i2c_adapter.name, "CX24123 tuner I2C bus", sizeof(state->tuner_i2c_adapter.name)); @@ -1079,7 +1113,7 @@ struct dvb_frontend* cx24123_attach(const struct cx24123_config* config, state->tuner_i2c_adapter.algo_data = NULL; i2c_set_adapdata(&state->tuner_i2c_adapter, state); if (i2c_add_adapter(&state->tuner_i2c_adapter) < 0) { - err("tuner i2c bus could not be initialized\n"); + err("tuner i2c bus could not be initialized\n"); goto error; } @@ -1090,6 +1124,7 @@ error: return NULL; } +EXPORT_SYMBOL(cx24123_attach); static struct dvb_frontend_ops cx24123_ops = { @@ -1126,15 +1161,8 @@ static struct dvb_frontend_ops cx24123_ops = { .get_frontend_algo = cx24123_get_algo, }; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); - -module_param(force_band, int, 0644); -MODULE_PARM_DESC(force_band, "Force a specific band select (1-9, default:off)."); - MODULE_DESCRIPTION("DVB Frontend module for Conexant " \ "CX24123/CX24109/CX24113 hardware"); MODULE_AUTHOR("Steven Toth"); MODULE_LICENSE("GPL"); -EXPORT_SYMBOL(cx24123_attach); diff --git a/drivers/media/dvb/frontends/cx24123.h b/drivers/media/dvb/frontends/cx24123.h index cc6b411d6d20..51ae866e9fed 100644 --- a/drivers/media/dvb/frontends/cx24123.h +++ b/drivers/media/dvb/frontends/cx24123.h @@ -23,13 +23,12 @@ #include <linux/dvb/frontend.h> -struct cx24123_config -{ +struct cx24123_config { /* the demodulator's i2c address */ u8 demod_address; /* Need to set device param for start_dma */ - int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured); + int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured); /* 0 = LNB voltage normal, 1 = LNB voltage inverted */ int lnb_polarity; @@ -39,7 +38,8 @@ struct cx24123_config void (*agc_callback) (struct dvb_frontend *); }; -#if defined(CONFIG_DVB_CX24123) || (defined(CONFIG_DVB_CX24123_MODULE) && defined(MODULE)) +#if defined(CONFIG_DVB_CX24123) || (defined(CONFIG_DVB_CX24123_MODULE) \ + && defined(MODULE)) extern struct dvb_frontend *cx24123_attach(const struct cx24123_config *config, struct i2c_adapter *i2c); extern struct i2c_adapter *cx24123_get_tuner_i2c_adapter(struct dvb_frontend *); @@ -56,6 +56,6 @@ static struct i2c_adapter * printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } -#endif // CONFIG_DVB_CX24123 +#endif #endif /* CX24123_H */ diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c index 7500a1c53e68..cf4d8936bb83 100644 --- a/drivers/media/dvb/frontends/s5h1409.c +++ b/drivers/media/dvb/frontends/s5h1409.c @@ -30,10 +30,10 @@ struct s5h1409_state { - struct i2c_adapter* i2c; + struct i2c_adapter *i2c; /* configuration settings */ - const struct s5h1409_config* config; + const struct s5h1409_config *config; struct dvb_frontend frontend; @@ -48,6 +48,9 @@ struct s5h1409_state { }; static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Enable verbose debug messages"); + #define dprintk if (debug) printk /* Register values to initialise the demod, this will set VSB by default */ @@ -299,10 +302,10 @@ static struct qam256_snr_tab { }; /* 8 bit registers, 16 bit values */ -static int s5h1409_writereg(struct s5h1409_state* state, u8 reg, u16 data) +static int s5h1409_writereg(struct s5h1409_state *state, u8 reg, u16 data) { int ret; - u8 buf [] = { reg, data >> 8, data & 0xff }; + u8 buf[] = { reg, data >> 8, data & 0xff }; struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 3 }; @@ -310,19 +313,19 @@ static int s5h1409_writereg(struct s5h1409_state* state, u8 reg, u16 data) ret = i2c_transfer(state->i2c, &msg, 1); if (ret != 1) - printk("%s: writereg error (reg == 0x%02x, val == 0x%04x, " + printk(KERN_ERR "%s: error (reg == 0x%02x, val == 0x%04x, " "ret == %i)\n", __func__, reg, data, ret); return (ret != 1) ? -1 : 0; } -static u16 s5h1409_readreg(struct s5h1409_state* state, u8 reg) +static u16 s5h1409_readreg(struct s5h1409_state *state, u8 reg) { int ret; - u8 b0 [] = { reg }; - u8 b1 [] = { 0, 0 }; + u8 b0[] = { reg }; + u8 b1[] = { 0, 0 }; - struct i2c_msg msg [] = { + struct i2c_msg msg[] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 }, { .addr = state->config->demod_address, .flags = I2C_M_RD, @@ -335,9 +338,9 @@ static u16 s5h1409_readreg(struct s5h1409_state* state, u8 reg) return (b1[0] << 8) | b1[1]; } -static int s5h1409_softreset(struct dvb_frontend* fe) +static int s5h1409_softreset(struct dvb_frontend *fe) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; dprintk("%s()\n", __func__); @@ -349,11 +352,11 @@ static int s5h1409_softreset(struct dvb_frontend* fe) } #define S5H1409_VSB_IF_FREQ 5380 -#define S5H1409_QAM_IF_FREQ state->config->qam_if +#define S5H1409_QAM_IF_FREQ (state->config->qam_if) -static int s5h1409_set_if_freq(struct dvb_frontend* fe, int KHz) +static int s5h1409_set_if_freq(struct dvb_frontend *fe, int KHz) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; dprintk("%s(%d KHz)\n", __func__, KHz); @@ -376,26 +379,26 @@ static int s5h1409_set_if_freq(struct dvb_frontend* fe, int KHz) return 0; } -static int s5h1409_set_spectralinversion(struct dvb_frontend* fe, int inverted) +static int s5h1409_set_spectralinversion(struct dvb_frontend *fe, int inverted) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; dprintk("%s(%d)\n", __func__, inverted); - if(inverted == 1) + if (inverted == 1) return s5h1409_writereg(state, 0x1b, 0x1101); /* Inverted */ else return s5h1409_writereg(state, 0x1b, 0x0110); /* Normal */ } -static int s5h1409_enable_modulation(struct dvb_frontend* fe, +static int s5h1409_enable_modulation(struct dvb_frontend *fe, fe_modulation_t m) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; dprintk("%s(0x%08x)\n", __func__, m); - switch(m) { + switch (m) { case VSB_8: dprintk("%s() VSB_8\n", __func__); if (state->if_freq != S5H1409_VSB_IF_FREQ) @@ -422,9 +425,9 @@ static int s5h1409_enable_modulation(struct dvb_frontend* fe, return 0; } -static int s5h1409_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) +static int s5h1409_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; dprintk("%s(%d)\n", __func__, enable); @@ -434,9 +437,9 @@ static int s5h1409_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) return s5h1409_writereg(state, 0xf3, 0); } -static int s5h1409_set_gpio(struct dvb_frontend* fe, int enable) +static int s5h1409_set_gpio(struct dvb_frontend *fe, int enable) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; dprintk("%s(%d)\n", __func__, enable); @@ -448,18 +451,18 @@ static int s5h1409_set_gpio(struct dvb_frontend* fe, int enable) s5h1409_readreg(state, 0xe3) & 0xfeff); } -static int s5h1409_sleep(struct dvb_frontend* fe, int enable) +static int s5h1409_sleep(struct dvb_frontend *fe, int enable) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; dprintk("%s(%d)\n", __func__, enable); return s5h1409_writereg(state, 0xf2, enable); } -static int s5h1409_register_reset(struct dvb_frontend* fe) +static int s5h1409_register_reset(struct dvb_frontend *fe) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; dprintk("%s()\n", __func__); @@ -483,7 +486,7 @@ static void s5h1409_set_qam_amhum_mode(struct dvb_frontend *fe) reg &= 0xff; s5h1409_writereg(state, 0x96, 0x00c); - if ((reg < 0x38) || (reg > 0x68) ) { + if ((reg < 0x38) || (reg > 0x68)) { s5h1409_writereg(state, 0x93, 0x3332); s5h1409_writereg(state, 0x9e, 0x2c37); } else { @@ -514,7 +517,7 @@ static void s5h1409_set_qam_interleave_mode(struct dvb_frontend *fe) s5h1409_writereg(state, 0x96, 0x20); s5h1409_writereg(state, 0xad, - ( ((reg1 & 0xf000) >> 4) | (reg2 & 0xf0ff)) ); + (((reg1 & 0xf000) >> 4) | (reg2 & 0xf0ff))); s5h1409_writereg(state, 0xab, s5h1409_readreg(state, 0xab) & 0xeffe); } @@ -529,10 +532,10 @@ static void s5h1409_set_qam_interleave_mode(struct dvb_frontend *fe) } /* Talk to the demod, set the FEC, GUARD, QAM settings etc */ -static int s5h1409_set_frontend (struct dvb_frontend* fe, +static int s5h1409_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; dprintk("%s(frequency=%d)\n", __func__, p->frequency); @@ -546,9 +549,11 @@ static int s5h1409_set_frontend (struct dvb_frontend* fe, msleep(100); if (fe->ops.tuner_ops.set_params) { - if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); fe->ops.tuner_ops.set_params(fe, p); - if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); } /* Optimize the demod for QAM */ @@ -592,17 +597,17 @@ static int s5h1409_set_mpeg_timing(struct dvb_frontend *fe, int mode) /* Reset the demod hardware and reset all of the configuration registers to a default state. */ -static int s5h1409_init (struct dvb_frontend* fe) +static int s5h1409_init(struct dvb_frontend *fe) { int i; - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; dprintk("%s()\n", __func__); s5h1409_sleep(fe, 0); s5h1409_register_reset(fe); - for (i=0; i < ARRAY_SIZE(init_tab); i++) + for (i = 0; i < ARRAY_SIZE(init_tab); i++) s5h1409_writereg(state, init_tab[i].reg, init_tab[i].data); /* The datasheet says that after initialisation, VSB is default */ @@ -627,9 +632,9 @@ static int s5h1409_init (struct dvb_frontend* fe) return 0; } -static int s5h1409_read_status(struct dvb_frontend* fe, fe_status_t* status) +static int s5h1409_read_status(struct dvb_frontend *fe, fe_status_t *status) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; u16 reg; u32 tuner_status = 0; @@ -637,12 +642,12 @@ static int s5h1409_read_status(struct dvb_frontend* fe, fe_status_t* status) /* Get the demodulator status */ reg = s5h1409_readreg(state, 0xf1); - if(reg & 0x1000) + if (reg & 0x1000) *status |= FE_HAS_VITERBI; - if(reg & 0x8000) + if (reg & 0x8000) *status |= FE_HAS_LOCK | FE_HAS_SYNC; - switch(state->config->status_mode) { + switch (state->config->status_mode) { case S5H1409_DEMODLOCKING: if (*status & FE_HAS_VITERBI) *status |= FE_HAS_CARRIER | FE_HAS_SIGNAL; @@ -668,12 +673,12 @@ static int s5h1409_read_status(struct dvb_frontend* fe, fe_status_t* status) return 0; } -static int s5h1409_qam256_lookup_snr(struct dvb_frontend* fe, u16* snr, u16 v) +static int s5h1409_qam256_lookup_snr(struct dvb_frontend *fe, u16 *snr, u16 v) { int i, ret = -EINVAL; dprintk("%s()\n", __func__); - for (i=0; i < ARRAY_SIZE(qam256_snr_tab); i++) { + for (i = 0; i < ARRAY_SIZE(qam256_snr_tab); i++) { if (v < qam256_snr_tab[i].val) { *snr = qam256_snr_tab[i].data; ret = 0; @@ -683,12 +688,12 @@ static int s5h1409_qam256_lookup_snr(struct dvb_frontend* fe, u16* snr, u16 v) return ret; } -static int s5h1409_qam64_lookup_snr(struct dvb_frontend* fe, u16* snr, u16 v) +static int s5h1409_qam64_lookup_snr(struct dvb_frontend *fe, u16 *snr, u16 v) { int i, ret = -EINVAL; dprintk("%s()\n", __func__); - for (i=0; i < ARRAY_SIZE(qam64_snr_tab); i++) { + for (i = 0; i < ARRAY_SIZE(qam64_snr_tab); i++) { if (v < qam64_snr_tab[i].val) { *snr = qam64_snr_tab[i].data; ret = 0; @@ -698,12 +703,12 @@ static int s5h1409_qam64_lookup_snr(struct dvb_frontend* fe, u16* snr, u16 v) return ret; } -static int s5h1409_vsb_lookup_snr(struct dvb_frontend* fe, u16* snr, u16 v) +static int s5h1409_vsb_lookup_snr(struct dvb_frontend *fe, u16 *snr, u16 v) { int i, ret = -EINVAL; dprintk("%s()\n", __func__); - for (i=0; i < ARRAY_SIZE(vsb_snr_tab); i++) { + for (i = 0; i < ARRAY_SIZE(vsb_snr_tab); i++) { if (v > vsb_snr_tab[i].val) { *snr = vsb_snr_tab[i].data; ret = 0; @@ -714,13 +719,13 @@ static int s5h1409_vsb_lookup_snr(struct dvb_frontend* fe, u16* snr, u16 v) return ret; } -static int s5h1409_read_snr(struct dvb_frontend* fe, u16* snr) +static int s5h1409_read_snr(struct dvb_frontend *fe, u16 *snr) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; u16 reg; dprintk("%s()\n", __func__); - switch(state->current_modulation) { + switch (state->current_modulation) { case QAM_64: reg = s5h1409_readreg(state, 0xf0) & 0xff; return s5h1409_qam64_lookup_snr(fe, snr, reg); @@ -737,30 +742,30 @@ static int s5h1409_read_snr(struct dvb_frontend* fe, u16* snr) return -EINVAL; } -static int s5h1409_read_signal_strength(struct dvb_frontend* fe, - u16* signal_strength) +static int s5h1409_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) { return s5h1409_read_snr(fe, signal_strength); } -static int s5h1409_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +static int s5h1409_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; *ucblocks = s5h1409_readreg(state, 0xb5); return 0; } -static int s5h1409_read_ber(struct dvb_frontend* fe, u32* ber) +static int s5h1409_read_ber(struct dvb_frontend *fe, u32 *ber) { return s5h1409_read_ucblocks(fe, ber); } -static int s5h1409_get_frontend(struct dvb_frontend* fe, +static int s5h1409_get_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; p->frequency = state->current_frequency; p->u.vsb.modulation = state->current_modulation; @@ -768,25 +773,25 @@ static int s5h1409_get_frontend(struct dvb_frontend* fe, return 0; } -static int s5h1409_get_tune_settings(struct dvb_frontend* fe, +static int s5h1409_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *tune) { tune->min_delay_ms = 1000; return 0; } -static void s5h1409_release(struct dvb_frontend* fe) +static void s5h1409_release(struct dvb_frontend *fe) { - struct s5h1409_state* state = fe->demodulator_priv; + struct s5h1409_state *state = fe->demodulator_priv; kfree(state); } static struct dvb_frontend_ops s5h1409_ops; -struct dvb_frontend* s5h1409_attach(const struct s5h1409_config* config, - struct i2c_adapter* i2c) +struct dvb_frontend *s5h1409_attach(const struct s5h1409_config *config, + struct i2c_adapter *i2c) { - struct s5h1409_state* state = NULL; + struct s5h1409_state *state = NULL; u16 reg; /* allocate memory for the internal state */ @@ -825,6 +830,7 @@ error: kfree(state); return NULL; } +EXPORT_SYMBOL(s5h1409_attach); static struct dvb_frontend_ops s5h1409_ops = { @@ -850,14 +856,10 @@ static struct dvb_frontend_ops s5h1409_ops = { .release = s5h1409_release, }; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Enable verbose debug messages"); - MODULE_DESCRIPTION("Samsung S5H1409 QAM-B/ATSC Demodulator driver"); MODULE_AUTHOR("Steven Toth"); MODULE_LICENSE("GPL"); -EXPORT_SYMBOL(s5h1409_attach); /* * Local variables: diff --git a/drivers/media/dvb/frontends/s5h1409.h b/drivers/media/dvb/frontends/s5h1409.h index d1a1d2eb8e11..070d9743e330 100644 --- a/drivers/media/dvb/frontends/s5h1409.h +++ b/drivers/media/dvb/frontends/s5h1409.h @@ -24,8 +24,7 @@ #include <linux/dvb/frontend.h> -struct s5h1409_config -{ +struct s5h1409_config { /* the demodulator's i2c address */ u8 demod_address; @@ -60,12 +59,14 @@ struct s5h1409_config u16 mpeg_timing; }; -#if defined(CONFIG_DVB_S5H1409) || (defined(CONFIG_DVB_S5H1409_MODULE) && defined(MODULE)) -extern struct dvb_frontend* s5h1409_attach(const struct s5h1409_config* config, - struct i2c_adapter* i2c); +#if defined(CONFIG_DVB_S5H1409) || (defined(CONFIG_DVB_S5H1409_MODULE) \ + && defined(MODULE)) +extern struct dvb_frontend *s5h1409_attach(const struct s5h1409_config *config, + struct i2c_adapter *i2c); #else -static inline struct dvb_frontend* s5h1409_attach(const struct s5h1409_config* config, - struct i2c_adapter* i2c) +static inline struct dvb_frontend *s5h1409_attach( + const struct s5h1409_config *config, + struct i2c_adapter *i2c) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; diff --git a/drivers/media/dvb/frontends/s5h1411.c b/drivers/media/dvb/frontends/s5h1411.c index 2da1a3763de9..2febfb5a846b 100644 --- a/drivers/media/dvb/frontends/s5h1411.c +++ b/drivers/media/dvb/frontends/s5h1411.c @@ -343,7 +343,7 @@ static int s5h1411_writereg(struct s5h1411_state *state, u8 addr, u8 reg, u16 data) { int ret; - u8 buf [] = { reg, data >> 8, data & 0xff }; + u8 buf[] = { reg, data >> 8, data & 0xff }; struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = 3 }; @@ -359,10 +359,10 @@ static int s5h1411_writereg(struct s5h1411_state *state, static u16 s5h1411_readreg(struct s5h1411_state *state, u8 addr, u8 reg) { int ret; - u8 b0 [] = { reg }; - u8 b1 [] = { 0, 0 }; + u8 b0[] = { reg }; + u8 b1[] = { 0, 0 }; - struct i2c_msg msg [] = { + struct i2c_msg msg[] = { { .addr = addr, .flags = 0, .buf = b0, .len = 1 }, { .addr = addr, .flags = I2C_M_RD, .buf = b1, .len = 2 } }; diff --git a/drivers/media/dvb/frontends/tda10048.c b/drivers/media/dvb/frontends/tda10048.c index 04e7f1cc1403..2a8bbcd44cd0 100644 --- a/drivers/media/dvb/frontends/tda10048.c +++ b/drivers/media/dvb/frontends/tda10048.c @@ -195,7 +195,7 @@ static struct init_tab { static int tda10048_writereg(struct tda10048_state *state, u8 reg, u8 data) { int ret; - u8 buf [] = { reg, data }; + u8 buf[] = { reg, data }; struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; @@ -213,9 +213,9 @@ static int tda10048_writereg(struct tda10048_state *state, u8 reg, u8 data) static u8 tda10048_readreg(struct tda10048_state *state, u8 reg) { int ret; - u8 b0 [] = { reg }; - u8 b1 [] = { 0 }; - struct i2c_msg msg [] = { + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + struct i2c_msg msg[] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 }, { .addr = state->config->demod_address, @@ -393,43 +393,89 @@ static int tda10048_get_tps(struct tda10048_state *state, val = tda10048_readreg(state, TDA10048_OUT_CONF2); switch ((val & 0x60) >> 5) { - case 0: p->constellation = QPSK; break; - case 1: p->constellation = QAM_16; break; - case 2: p->constellation = QAM_64; break; + case 0: + p->constellation = QPSK; + break; + case 1: + p->constellation = QAM_16; + break; + case 2: + p->constellation = QAM_64; + break; } switch ((val & 0x18) >> 3) { - case 0: p->hierarchy_information = HIERARCHY_NONE; break; - case 1: p->hierarchy_information = HIERARCHY_1; break; - case 2: p->hierarchy_information = HIERARCHY_2; break; - case 3: p->hierarchy_information = HIERARCHY_4; break; + case 0: + p->hierarchy_information = HIERARCHY_NONE; + break; + case 1: + p->hierarchy_information = HIERARCHY_1; + break; + case 2: + p->hierarchy_information = HIERARCHY_2; + break; + case 3: + p->hierarchy_information = HIERARCHY_4; + break; } switch (val & 0x07) { - case 0: p->code_rate_HP = FEC_1_2; break; - case 1: p->code_rate_HP = FEC_2_3; break; - case 2: p->code_rate_HP = FEC_3_4; break; - case 3: p->code_rate_HP = FEC_5_6; break; - case 4: p->code_rate_HP = FEC_7_8; break; + case 0: + p->code_rate_HP = FEC_1_2; + break; + case 1: + p->code_rate_HP = FEC_2_3; + break; + case 2: + p->code_rate_HP = FEC_3_4; + break; + case 3: + p->code_rate_HP = FEC_5_6; + break; + case 4: + p->code_rate_HP = FEC_7_8; + break; } val = tda10048_readreg(state, TDA10048_OUT_CONF3); switch (val & 0x07) { - case 0: p->code_rate_LP = FEC_1_2; break; - case 1: p->code_rate_LP = FEC_2_3; break; - case 2: p->code_rate_LP = FEC_3_4; break; - case 3: p->code_rate_LP = FEC_5_6; break; - case 4: p->code_rate_LP = FEC_7_8; break; + case 0: + p->code_rate_LP = FEC_1_2; + break; + case 1: + p->code_rate_LP = FEC_2_3; + break; + case 2: + p->code_rate_LP = FEC_3_4; + break; + case 3: + p->code_rate_LP = FEC_5_6; + break; + case 4: + p->code_rate_LP = FEC_7_8; + break; } val = tda10048_readreg(state, TDA10048_OUT_CONF1); switch ((val & 0x0c) >> 2) { - case 0: p->guard_interval = GUARD_INTERVAL_1_32; break; - case 1: p->guard_interval = GUARD_INTERVAL_1_16; break; - case 2: p->guard_interval = GUARD_INTERVAL_1_8; break; - case 3: p->guard_interval = GUARD_INTERVAL_1_4; break; + case 0: + p->guard_interval = GUARD_INTERVAL_1_32; + break; + case 1: + p->guard_interval = GUARD_INTERVAL_1_16; + break; + case 2: + p->guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + p->guard_interval = GUARD_INTERVAL_1_4; + break; } switch (val & 0x02) { - case 0: p->transmission_mode = TRANSMISSION_MODE_2K; break; - case 1: p->transmission_mode = TRANSMISSION_MODE_8K; break; + case 0: + p->transmission_mode = TRANSMISSION_MODE_2K; + break; + case 1: + p->transmission_mode = TRANSMISSION_MODE_8K; + break; } return 0; diff --git a/drivers/media/dvb/frontends/z0194a.h b/drivers/media/dvb/frontends/z0194a.h index d2876d2e1769..07f3fc0998f6 100644 --- a/drivers/media/dvb/frontends/z0194a.h +++ b/drivers/media/dvb/frontends/z0194a.h @@ -12,7 +12,7 @@ #ifndef Z0194A #define Z0194A -static int sharp_z0194a__set_symbol_rate(struct dvb_frontend *fe, +static int sharp_z0194a_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio) { u8 aclk = 0; @@ -40,7 +40,7 @@ static int sharp_z0194a__set_symbol_rate(struct dvb_frontend *fe, return 0; } -static u8 sharp_z0194a__inittab[] = { +static u8 sharp_z0194a_inittab[] = { 0x01, 0x15, 0x02, 0x00, 0x03, 0x00, @@ -82,16 +82,4 @@ static u8 sharp_z0194a__inittab[] = { 0xff, 0xff }; -static struct stv0299_config sharp_z0194a_config = { - .demod_address = 0x68, - .inittab = sharp_z0194a__inittab, - .mclk = 88000000UL, - .invert = 1, - .skip_reinit = 0, - .lock_output = STV0299_LOCKOUTPUT_1, - .volt13_op0_op1 = STV0299_VOLT13_OP1, - .min_delay_ms = 100, - .set_symbol_rate = sharp_z0194a__set_symbol_rate, -}; - #endif diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c index 9da260fe3fd1..6f9b77360440 100644 --- a/drivers/media/dvb/siano/sms-cards.c +++ b/drivers/media/dvb/siano/sms-cards.c @@ -42,6 +42,10 @@ struct usb_device_id smsusb_id_table[] = { .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, { USB_DEVICE(0x2040, 0x5510), .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, + { USB_DEVICE(0x2040, 0x5520), + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, + { USB_DEVICE(0x2040, 0x5530), + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, { USB_DEVICE(0x2040, 0x5580), .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, { USB_DEVICE(0x2040, 0x5590), diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index e51d707e58d3..04cd7c04bdde 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -359,7 +359,7 @@ config USB_SI470X computer's USB port. To compile this driver as a module, choose M here: the - module will be called radio-silabs. + module will be called radio-si470x. config USB_MR800 tristate "AverMedia MR 800 USB FM radio support" diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c index f6cedcd3ab97..5920cd306975 100644 --- a/drivers/media/radio/radio-si470x.c +++ b/drivers/media/radio/radio-si470x.c @@ -104,6 +104,7 @@ * - hardware frequency seek support * - afc indication * - more safety checks, let si470x_get_freq return errno + * - vidioc behavior corrected according to v4l2 spec * * ToDo: * - add firmware download/update support @@ -141,9 +142,9 @@ /* USB Device ID List */ static struct usb_device_id si470x_usb_driver_id_table[] = { /* Silicon Labs USB FM Radio Reference Design */ - { USB_DEVICE_AND_INTERFACE_INFO(0x10c4, 0x818a, USB_CLASS_HID, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x10c4, 0x818a, USB_CLASS_HID, 0, 0) }, /* ADS/Tech FM Radio Receiver (formerly Instant FM Music) */ - { USB_DEVICE_AND_INTERFACE_INFO(0x06e1, 0xa155, USB_CLASS_HID, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x06e1, 0xa155, USB_CLASS_HID, 0, 0) }, /* Terminating entry */ { } }; @@ -157,7 +158,7 @@ MODULE_DEVICE_TABLE(usb, si470x_usb_driver_id_table); /* Radio Nr */ static int radio_nr = -1; -module_param(radio_nr, int, 0); +module_param(radio_nr, int, 0444); MODULE_PARM_DESC(radio_nr, "Radio Nr"); /* Spacing (kHz) */ @@ -165,42 +166,42 @@ MODULE_PARM_DESC(radio_nr, "Radio Nr"); /* 1: 100 kHz (Europe, Japan) */ /* 2: 50 kHz */ static unsigned short space = 2; -module_param(space, ushort, 0); -MODULE_PARM_DESC(radio_nr, "Spacing: 0=200kHz 1=100kHz *2=50kHz*"); +module_param(space, ushort, 0444); +MODULE_PARM_DESC(space, "Spacing: 0=200kHz 1=100kHz *2=50kHz*"); /* Bottom of Band (MHz) */ /* 0: 87.5 - 108 MHz (USA, Europe)*/ /* 1: 76 - 108 MHz (Japan wide band) */ /* 2: 76 - 90 MHz (Japan) */ static unsigned short band = 1; -module_param(band, ushort, 0); -MODULE_PARM_DESC(radio_nr, "Band: 0=87.5..108MHz *1=76..108MHz* 2=76..90MHz"); +module_param(band, ushort, 0444); +MODULE_PARM_DESC(band, "Band: 0=87.5..108MHz *1=76..108MHz* 2=76..90MHz"); /* De-emphasis */ /* 0: 75 us (USA) */ /* 1: 50 us (Europe, Australia, Japan) */ static unsigned short de = 1; -module_param(de, ushort, 0); -MODULE_PARM_DESC(radio_nr, "De-emphasis: 0=75us *1=50us*"); +module_param(de, ushort, 0444); +MODULE_PARM_DESC(de, "De-emphasis: 0=75us *1=50us*"); /* USB timeout */ static unsigned int usb_timeout = 500; -module_param(usb_timeout, uint, 0); +module_param(usb_timeout, uint, 0644); MODULE_PARM_DESC(usb_timeout, "USB timeout (ms): *500*"); /* Tune timeout */ static unsigned int tune_timeout = 3000; -module_param(tune_timeout, uint, 0); +module_param(tune_timeout, uint, 0644); MODULE_PARM_DESC(tune_timeout, "Tune timeout: *3000*"); /* Seek timeout */ static unsigned int seek_timeout = 5000; -module_param(seek_timeout, uint, 0); +module_param(seek_timeout, uint, 0644); MODULE_PARM_DESC(seek_timeout, "Seek timeout: *5000*"); /* RDS buffer blocks */ static unsigned int rds_buf = 100; -module_param(rds_buf, uint, 0); +module_param(rds_buf, uint, 0444); MODULE_PARM_DESC(rds_buf, "RDS buffer entries: *100*"); /* RDS maximum block errors */ @@ -209,7 +210,7 @@ static unsigned short max_rds_errors = 1; /* 1 means 1-2 errors requiring correction (used by original USBRadio.exe) */ /* 2 means 3-5 errors requiring correction */ /* 3 means 6+ errors or errors in checkword, correction not possible */ -module_param(max_rds_errors, ushort, 0); +module_param(max_rds_errors, ushort, 0644); MODULE_PARM_DESC(max_rds_errors, "RDS maximum block errors: *1*"); /* RDS poll frequency */ @@ -218,7 +219,7 @@ static unsigned int rds_poll_time = 40; /* 50 is used by radio-cadet */ /* 75 should be okay */ /* 80 is the usual RDS receive interval */ -module_param(rds_poll_time, uint, 0); +module_param(rds_poll_time, uint, 0644); MODULE_PARM_DESC(rds_poll_time, "RDS poll time (ms): *40*"); @@ -667,23 +668,29 @@ static int si470x_get_freq(struct si470x_device *radio, unsigned int *freq) int retval; /* Spacing (kHz) */ - switch (space) { + switch ((radio->registers[SYSCONFIG2] & SYSCONFIG2_SPACE) >> 4) { /* 0: 200 kHz (USA, Australia) */ - case 0 : spacing = 0.200 * FREQ_MUL; break; + case 0: + spacing = 0.200 * FREQ_MUL; break; /* 1: 100 kHz (Europe, Japan) */ - case 1 : spacing = 0.100 * FREQ_MUL; break; + case 1: + spacing = 0.100 * FREQ_MUL; break; /* 2: 50 kHz */ - default: spacing = 0.050 * FREQ_MUL; break; + default: + spacing = 0.050 * FREQ_MUL; break; }; /* Bottom of Band (MHz) */ - switch (band) { + switch ((radio->registers[SYSCONFIG2] & SYSCONFIG2_BAND) >> 6) { /* 0: 87.5 - 108 MHz (USA, Europe) */ - case 0 : band_bottom = 87.5 * FREQ_MUL; break; + case 0: + band_bottom = 87.5 * FREQ_MUL; break; /* 1: 76 - 108 MHz (Japan wide band) */ - default: band_bottom = 76 * FREQ_MUL; break; + default: + band_bottom = 76 * FREQ_MUL; break; /* 2: 76 - 90 MHz (Japan) */ - case 2 : band_bottom = 76 * FREQ_MUL; break; + case 2: + band_bottom = 76 * FREQ_MUL; break; }; /* read channel */ @@ -706,23 +713,29 @@ static int si470x_set_freq(struct si470x_device *radio, unsigned int freq) unsigned short chan; /* Spacing (kHz) */ - switch (space) { + switch ((radio->registers[SYSCONFIG2] & SYSCONFIG2_SPACE) >> 4) { /* 0: 200 kHz (USA, Australia) */ - case 0 : spacing = 0.200 * FREQ_MUL; break; + case 0: + spacing = 0.200 * FREQ_MUL; break; /* 1: 100 kHz (Europe, Japan) */ - case 1 : spacing = 0.100 * FREQ_MUL; break; + case 1: + spacing = 0.100 * FREQ_MUL; break; /* 2: 50 kHz */ - default: spacing = 0.050 * FREQ_MUL; break; + default: + spacing = 0.050 * FREQ_MUL; break; }; /* Bottom of Band (MHz) */ - switch (band) { + switch ((radio->registers[SYSCONFIG2] & SYSCONFIG2_BAND) >> 6) { /* 0: 87.5 - 108 MHz (USA, Europe) */ - case 0 : band_bottom = 87.5 * FREQ_MUL; break; + case 0: + band_bottom = 87.5 * FREQ_MUL; break; /* 1: 76 - 108 MHz (Japan wide band) */ - default: band_bottom = 76 * FREQ_MUL; break; + default: + band_bottom = 76 * FREQ_MUL; break; /* 2: 76 - 90 MHz (Japan) */ - case 2 : band_bottom = 76 * FREQ_MUL; break; + case 2: + band_bottom = 76 * FREQ_MUL; break; }; /* Chan = [ Freq (Mhz) - Bottom of Band (MHz) ] / Spacing (kHz) */ @@ -1164,7 +1177,6 @@ static const struct file_operations si470x_fops = { * si470x_v4l2_queryctrl - query control */ static struct v4l2_queryctrl si470x_v4l2_queryctrl[] = { -/* HINT: the disabled controls are only here to satify kradio and such apps */ { .id = V4L2_CID_AUDIO_VOLUME, .type = V4L2_CTRL_TYPE_INTEGER, @@ -1175,18 +1187,6 @@ static struct v4l2_queryctrl si470x_v4l2_queryctrl[] = { .default_value = 15, }, { - .id = V4L2_CID_AUDIO_BALANCE, - .flags = V4L2_CTRL_FLAG_DISABLED, - }, - { - .id = V4L2_CID_AUDIO_BASS, - .flags = V4L2_CTRL_FLAG_DISABLED, - }, - { - .id = V4L2_CID_AUDIO_TREBLE, - .flags = V4L2_CTRL_FLAG_DISABLED, - }, - { .id = V4L2_CID_AUDIO_MUTE, .type = V4L2_CTRL_TYPE_BOOLEAN, .name = "Mute", @@ -1195,10 +1195,6 @@ static struct v4l2_queryctrl si470x_v4l2_queryctrl[] = { .step = 1, .default_value = 1, }, - { - .id = V4L2_CID_AUDIO_LOUDNESS, - .flags = V4L2_CTRL_FLAG_DISABLED, - }, }; @@ -1220,56 +1216,34 @@ static int si470x_vidioc_querycap(struct file *file, void *priv, /* - * si470x_vidioc_g_input - get input - */ -static int si470x_vidioc_g_input(struct file *file, void *priv, - unsigned int *i) -{ - *i = 0; - - return 0; -} - - -/* - * si470x_vidioc_s_input - set input - */ -static int si470x_vidioc_s_input(struct file *file, void *priv, unsigned int i) -{ - int retval = 0; - - /* safety checks */ - if (i != 0) - retval = -EINVAL; - - if (retval < 0) - printk(KERN_WARNING DRIVER_NAME - ": set input failed with %d\n", retval); - return retval; -} - - -/* * si470x_vidioc_queryctrl - enumerate control items */ static int si470x_vidioc_queryctrl(struct file *file, void *priv, struct v4l2_queryctrl *qc) { - unsigned char i; + unsigned char i = 0; int retval = -EINVAL; - /* safety checks */ - if (!qc->id) + /* abort if qc->id is below V4L2_CID_BASE */ + if (qc->id < V4L2_CID_BASE) goto done; + /* search video control */ for (i = 0; i < ARRAY_SIZE(si470x_v4l2_queryctrl); i++) { if (qc->id == si470x_v4l2_queryctrl[i].id) { memcpy(qc, &(si470x_v4l2_queryctrl[i]), sizeof(*qc)); - retval = 0; + retval = 0; /* found */ break; } } + /* disable unsupported base controls */ + /* to satisfy kradio and such apps */ + if ((retval == -EINVAL) && (qc->id < V4L2_CID_LASTP1)) { + qc->flags = V4L2_CTRL_FLAG_DISABLED; + retval = 0; + } + done: if (retval < 0) printk(KERN_WARNING DRIVER_NAME @@ -1360,44 +1334,13 @@ done: static int si470x_vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *audio) { - int retval = 0; - - /* safety checks */ - if (audio->index != 0) { - retval = -EINVAL; - goto done; - } - + /* driver constants */ + audio->index = 0; strcpy(audio->name, "Radio"); audio->capability = V4L2_AUDCAP_STEREO; + audio->mode = 0; -done: - if (retval < 0) - printk(KERN_WARNING DRIVER_NAME - ": get audio failed with %d\n", retval); - return retval; -} - - -/* - * si470x_vidioc_s_audio - set audio attributes - */ -static int si470x_vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *audio) -{ - int retval = 0; - - /* safety checks */ - if (audio->index != 0) { - retval = -EINVAL; - goto done; - } - -done: - if (retval < 0) - printk(KERN_WARNING DRIVER_NAME - ": set audio failed with %d\n", retval); - return retval; + return 0; } @@ -1415,7 +1358,7 @@ static int si470x_vidioc_g_tuner(struct file *file, void *priv, retval = -EIO; goto done; } - if ((tuner->index != 0) && (tuner->type != V4L2_TUNER_RADIO)) { + if (tuner->index != 0) { retval = -EINVAL; goto done; } @@ -1424,8 +1367,13 @@ static int si470x_vidioc_g_tuner(struct file *file, void *priv, if (retval < 0) goto done; + /* driver constants */ strcpy(tuner->name, "FM"); - switch (band) { + tuner->type = V4L2_TUNER_RADIO; + tuner->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; + + /* range limits */ + switch ((radio->registers[SYSCONFIG2] & SYSCONFIG2_BAND) >> 6) { /* 0: 87.5 - 108 MHz (USA, Europe, default) */ default: tuner->rangelow = 87.5 * FREQ_MUL; @@ -1442,14 +1390,18 @@ static int si470x_vidioc_g_tuner(struct file *file, void *priv, tuner->rangehigh = 90 * FREQ_MUL; break; }; - tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; - tuner->capability = V4L2_TUNER_CAP_LOW; - /* Stereo indicator == Stereo (instead of Mono) */ + /* stereo indicator == stereo (instead of mono) */ if ((radio->registers[STATUSRSSI] & STATUSRSSI_ST) == 1) - tuner->audmode = V4L2_TUNER_MODE_STEREO; + tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; else + tuner->rxsubchans = V4L2_TUNER_SUB_MONO; + + /* mono/stereo selector */ + if ((radio->registers[POWERCFG] & POWERCFG_MONO) == 1) tuner->audmode = V4L2_TUNER_MODE_MONO; + else + tuner->audmode = V4L2_TUNER_MODE_STEREO; /* min is worst, max is best; signal:0..0xffff; rssi: 0..0xff */ tuner->signal = (radio->registers[STATUSRSSI] & STATUSRSSI_RSSI) @@ -1474,22 +1426,27 @@ static int si470x_vidioc_s_tuner(struct file *file, void *priv, struct v4l2_tuner *tuner) { struct si470x_device *radio = video_drvdata(file); - int retval = 0; + int retval = -EINVAL; /* safety checks */ if (radio->disconnected) { retval = -EIO; goto done; } - if ((tuner->index != 0) && (tuner->type != V4L2_TUNER_RADIO)) { - retval = -EINVAL; + if (tuner->index != 0) goto done; - } - if (tuner->audmode == V4L2_TUNER_MODE_MONO) + /* mono/stereo selector */ + switch (tuner->audmode) { + case V4L2_TUNER_MODE_MONO: radio->registers[POWERCFG] |= POWERCFG_MONO; /* force mono */ - else + break; + case V4L2_TUNER_MODE_STEREO: radio->registers[POWERCFG] &= ~POWERCFG_MONO; /* try stereo */ + break; + default: + goto done; + } retval = si470x_set_register(radio, POWERCFG); @@ -1515,11 +1472,12 @@ static int si470x_vidioc_g_frequency(struct file *file, void *priv, retval = -EIO; goto done; } - if ((freq->tuner != 0) && (freq->type != V4L2_TUNER_RADIO)) { + if (freq->tuner != 0) { retval = -EINVAL; goto done; } + freq->type = V4L2_TUNER_RADIO; retval = si470x_get_freq(radio, &freq->frequency); done: @@ -1544,7 +1502,7 @@ static int si470x_vidioc_s_frequency(struct file *file, void *priv, retval = -EIO; goto done; } - if ((freq->tuner != 0) && (freq->type != V4L2_TUNER_RADIO)) { + if (freq->tuner != 0) { retval = -EINVAL; goto done; } @@ -1573,7 +1531,7 @@ static int si470x_vidioc_s_hw_freq_seek(struct file *file, void *priv, retval = -EIO; goto done; } - if ((seek->tuner != 0) && (seek->type != V4L2_TUNER_RADIO)) { + if (seek->tuner != 0) { retval = -EINVAL; goto done; } @@ -1588,15 +1546,16 @@ done: return retval; } + +/* + * si470x_ioctl_ops - video device ioctl operations + */ static const struct v4l2_ioctl_ops si470x_ioctl_ops = { .vidioc_querycap = si470x_vidioc_querycap, - .vidioc_g_input = si470x_vidioc_g_input, - .vidioc_s_input = si470x_vidioc_s_input, .vidioc_queryctrl = si470x_vidioc_queryctrl, .vidioc_g_ctrl = si470x_vidioc_g_ctrl, .vidioc_s_ctrl = si470x_vidioc_s_ctrl, .vidioc_g_audio = si470x_vidioc_g_audio, - .vidioc_s_audio = si470x_vidioc_s_audio, .vidioc_g_tuner = si470x_vidioc_g_tuner, .vidioc_s_tuner = si470x_vidioc_s_tuner, .vidioc_g_frequency = si470x_vidioc_g_frequency, @@ -1604,14 +1563,15 @@ static const struct v4l2_ioctl_ops si470x_ioctl_ops = { .vidioc_s_hw_freq_seek = si470x_vidioc_s_hw_freq_seek, }; + /* - * si470x_viddev_tamples - video device interface + * si470x_viddev_template - video device interface */ static struct video_device si470x_viddev_template = { .fops = &si470x_fops, - .ioctl_ops = &si470x_ioctl_ops, .name = DRIVER_NAME, .release = video_device_release, + .ioctl_ops = &si470x_ioctl_ops, }; diff --git a/drivers/media/video/adv7170.c b/drivers/media/video/adv7170.c index f794f2dbfb32..e0eb4f321442 100644 --- a/drivers/media/video/adv7170.c +++ b/drivers/media/video/adv7170.c @@ -29,43 +29,24 @@ */ #include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/major.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/signal.h> #include <linux/types.h> -#include <linux/i2c.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> +#include <linux/ioctl.h> #include <asm/uaccess.h> - +#include <linux/i2c.h> +#include <linux/i2c-id.h> #include <linux/videodev.h> #include <linux/video_encoder.h> +#include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv-legacy.h> MODULE_DESCRIPTION("Analog Devices ADV7170 video encoder driver"); MODULE_AUTHOR("Maxim Yevtyushkin"); MODULE_LICENSE("GPL"); - -#define I2C_NAME(x) (x)->name - - static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); -#define dprintk(num, format, args...) \ - do { \ - if (debug >= num) \ - printk(format, ##args); \ - } while (0) - /* ----------------------------------------------------------------------- */ struct adv7170 { @@ -80,21 +61,12 @@ struct adv7170 { int sat; }; -#define I2C_ADV7170 0xd4 -#define I2C_ADV7171 0x54 - -static char adv7170_name[] = "adv7170"; -static char adv7171_name[] = "adv7171"; - static char *inputs[] = { "pass_through", "play_back" }; static char *norms[] = { "PAL", "NTSC" }; /* ----------------------------------------------------------------------- */ -static inline int -adv7170_write (struct i2c_client *client, - u8 reg, - u8 value) +static inline int adv7170_write(struct i2c_client *client, u8 reg, u8 value) { struct adv7170 *encoder = i2c_get_clientdata(client); @@ -102,17 +74,13 @@ adv7170_write (struct i2c_client *client, return i2c_smbus_write_byte_data(client, reg, value); } -static inline int -adv7170_read (struct i2c_client *client, - u8 reg) +static inline int adv7170_read(struct i2c_client *client, u8 reg) { return i2c_smbus_read_byte_data(client, reg); } -static int -adv7170_write_block (struct i2c_client *client, - const u8 *data, - unsigned int len) +static int adv7170_write_block(struct i2c_client *client, + const u8 *data, unsigned int len) { int ret = -1; u8 reg; @@ -133,33 +101,25 @@ adv7170_write_block (struct i2c_client *client, encoder->reg[reg++] = data[1]; len -= 2; data += 2; - } while (len >= 2 && data[0] == reg && - block_len < 32); - if ((ret = i2c_master_send(client, block_data, - block_len)) < 0) + } while (len >= 2 && data[0] == reg && block_len < 32); + ret = i2c_master_send(client, block_data, block_len); + if (ret < 0) break; } } else { /* do some slow I2C emulation kind of thing */ while (len >= 2) { reg = *data++; - if ((ret = adv7170_write(client, reg, - *data++)) < 0) + ret = adv7170_write(client, reg, *data++); + if (ret < 0) break; len -= 2; } } - return ret; } /* ----------------------------------------------------------------------- */ -// Output filter: S-Video Composite - -#define MR050 0x11 //0x09 -#define MR060 0x14 //0x0c - -//--------------------------------------------------------------------------- #define TR0MODE 0x4c #define TR0RST 0x80 @@ -167,7 +127,6 @@ adv7170_write_block (struct i2c_client *client, #define TR1CAPT 0x00 #define TR1PLAY 0x00 - static const unsigned char init_NTSC[] = { 0x00, 0x10, // MR0 0x01, 0x20, // MR1 @@ -227,15 +186,11 @@ static const unsigned char init_PAL[] = { }; -static int -adv7170_command (struct i2c_client *client, - unsigned int cmd, - void * arg) +static int adv7170_command(struct i2c_client *client, unsigned cmd, void *arg) { struct adv7170 *encoder = i2c_get_clientdata(client); switch (cmd) { - case 0: #if 0 /* This is just for testing!!! */ @@ -254,18 +209,16 @@ adv7170_command (struct i2c_client *client, VIDEO_ENCODER_NTSC; cap->inputs = 2; cap->outputs = 1; - } break; + } case ENCODER_SET_NORM: { int iarg = *(int *) arg; - dprintk(1, KERN_DEBUG "%s_command: set norm %d", - I2C_NAME(client), iarg); + v4l_dbg(1, debug, client, "set norm %d\n", iarg); switch (iarg) { - case VIDEO_MODE_NTSC: adv7170_write_block(client, init_NTSC, sizeof(init_NTSC)); @@ -285,16 +238,13 @@ adv7170_command (struct i2c_client *client, break; default: - dprintk(1, KERN_ERR "%s: illegal norm: %d\n", - I2C_NAME(client), iarg); + v4l_dbg(1, debug, client, "illegal norm: %d\n", iarg); return -EINVAL; - } - dprintk(1, KERN_DEBUG "%s: switched to %s\n", I2C_NAME(client), - norms[iarg]); + v4l_dbg(1, debug, client, "switched to %s\n", norms[iarg]); encoder->norm = iarg; - } break; + } case ENCODER_SET_INPUT: { @@ -304,19 +254,17 @@ adv7170_command (struct i2c_client *client, *iarg = 1: input is from ZR36060 *iarg = 2: color bar */ - dprintk(1, KERN_DEBUG "%s_command: set input from %s\n", - I2C_NAME(client), + v4l_dbg(1, debug, client, "set input from %s\n", iarg == 0 ? "decoder" : "ZR36060"); switch (iarg) { - case 0: adv7170_write(client, 0x01, 0x20); adv7170_write(client, 0x08, TR1CAPT); /* TR1 */ adv7170_write(client, 0x02, 0x0e); // Enable genlock adv7170_write(client, 0x07, TR0MODE | TR0RST); adv7170_write(client, 0x07, TR0MODE); - //udelay(10); + /* udelay(10); */ break; case 1: @@ -325,20 +273,17 @@ adv7170_command (struct i2c_client *client, adv7170_write(client, 0x02, 0x08); adv7170_write(client, 0x07, TR0MODE | TR0RST); adv7170_write(client, 0x07, TR0MODE); - //udelay(10); + /* udelay(10); */ break; default: - dprintk(1, KERN_ERR "%s: illegal input: %d\n", - I2C_NAME(client), iarg); + v4l_dbg(1, debug, client, "illegal input: %d\n", iarg); return -EINVAL; - } - dprintk(1, KERN_DEBUG "%s: switched to %s\n", I2C_NAME(client), - inputs[iarg]); + v4l_dbg(1, debug, client, "switched to %s\n", inputs[iarg]); encoder->input = iarg; - } break; + } case ENCODER_SET_OUTPUT: { @@ -348,16 +293,16 @@ adv7170_command (struct i2c_client *client, if (*iarg != 0) { return -EINVAL; } - } break; + } case ENCODER_ENABLE_OUTPUT: { int *iarg = arg; encoder->enable = !!*iarg; - } break; + } default: return -EINVAL; @@ -368,149 +313,67 @@ adv7170_command (struct i2c_client *client, /* ----------------------------------------------------------------------- */ -/* - * Generic i2c probe - * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' - */ -static unsigned short normal_i2c[] = - { I2C_ADV7170 >> 1, (I2C_ADV7170 >> 1) + 1, - I2C_ADV7171 >> 1, (I2C_ADV7171 >> 1) + 1, +static unsigned short normal_i2c[] = { + 0xd4 >> 1, 0xd6 >> 1, /* adv7170 IDs */ + 0x54 >> 1, 0x56 >> 1, /* adv7171 IDs */ I2C_CLIENT_END }; -static unsigned short ignore = I2C_CLIENT_END; +I2C_CLIENT_INSMOD; -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_i2c, - .probe = &ignore, - .ignore = &ignore, -}; - -static struct i2c_driver i2c_driver_adv7170; - -static int -adv7170_detect_client (struct i2c_adapter *adapter, - int address, - int kind) +static int adv7170_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - int i; - struct i2c_client *client; struct adv7170 *encoder; - char *dname; - - dprintk(1, - KERN_INFO - "adv7170.c: detecting adv7170 client on address 0x%x\n", - address << 1); + int i; /* Check if the adapter supports the needed features */ - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return 0; + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) - return -ENOMEM; - client->addr = address; - client->adapter = adapter; - client->driver = &i2c_driver_adv7170; - if ((client->addr == I2C_ADV7170 >> 1) || - (client->addr == (I2C_ADV7170 >> 1) + 1)) { - dname = adv7170_name; - } else if ((client->addr == I2C_ADV7171 >> 1) || - (client->addr == (I2C_ADV7171 >> 1) + 1)) { - dname = adv7171_name; - } else { - /* We should never get here!!! */ - kfree(client); - return 0; - } - strlcpy(I2C_NAME(client), dname, sizeof(I2C_NAME(client))); + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); encoder = kzalloc(sizeof(struct adv7170), GFP_KERNEL); - if (encoder == NULL) { - kfree(client); + if (encoder == NULL) return -ENOMEM; - } encoder->norm = VIDEO_MODE_NTSC; encoder->input = 0; encoder->enable = 1; i2c_set_clientdata(client, encoder); - i = i2c_attach_client(client); - if (i) { - kfree(client); - kfree(encoder); - return i; - } - i = adv7170_write_block(client, init_NTSC, sizeof(init_NTSC)); if (i >= 0) { i = adv7170_write(client, 0x07, TR0MODE | TR0RST); i = adv7170_write(client, 0x07, TR0MODE); i = adv7170_read(client, 0x12); - dprintk(1, KERN_INFO "%s_attach: rev. %d at 0x%02x\n", - I2C_NAME(client), i & 1, client->addr << 1); - } - if (i < 0) { - dprintk(1, KERN_ERR "%s_attach: init error 0x%x\n", - I2C_NAME(client), i); + v4l_dbg(1, debug, client, "revision %d\n", i & 1); } - + if (i < 0) + v4l_dbg(1, debug, client, "init error 0x%x\n", i); return 0; } -static int -adv7170_attach_adapter (struct i2c_adapter *adapter) -{ - dprintk(1, - KERN_INFO - "adv7170.c: starting probe for adapter %s (0x%x)\n", - I2C_NAME(adapter), adapter->id); - return i2c_probe(adapter, &addr_data, &adv7170_detect_client); -} - -static int -adv7170_detach_client (struct i2c_client *client) +static int adv7170_remove(struct i2c_client *client) { - struct adv7170 *encoder = i2c_get_clientdata(client); - int err; - - err = i2c_detach_client(client); - if (err) { - return err; - } - - kfree(encoder); - kfree(client); - + kfree(i2c_get_clientdata(client)); return 0; } /* ----------------------------------------------------------------------- */ -static struct i2c_driver i2c_driver_adv7170 = { - .driver = { - .name = "adv7170", /* name */ - }, - - .id = I2C_DRIVERID_ADV7170, +static const struct i2c_device_id adv7170_id[] = { + { "adv7170", 0 }, + { "adv7171", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adv7170_id); - .attach_adapter = adv7170_attach_adapter, - .detach_client = adv7170_detach_client, +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "adv7170", + .driverid = I2C_DRIVERID_ADV7170, .command = adv7170_command, + .probe = adv7170_probe, + .remove = adv7170_remove, + .id_table = adv7170_id, }; - -static int __init -adv7170_init (void) -{ - return i2c_add_driver(&i2c_driver_adv7170); -} - -static void __exit -adv7170_exit (void) -{ - i2c_del_driver(&i2c_driver_adv7170); -} - -module_init(adv7170_init); -module_exit(adv7170_exit); diff --git a/drivers/media/video/adv7175.c b/drivers/media/video/adv7175.c index 8ee07a68f702..6008e84653f1 100644 --- a/drivers/media/video/adv7175.c +++ b/drivers/media/video/adv7175.c @@ -25,43 +25,24 @@ */ #include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/major.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/signal.h> #include <linux/types.h> -#include <linux/i2c.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> +#include <linux/ioctl.h> #include <asm/uaccess.h> - +#include <linux/i2c.h> +#include <linux/i2c-id.h> #include <linux/videodev.h> #include <linux/video_encoder.h> +#include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv-legacy.h> MODULE_DESCRIPTION("Analog Devices ADV7175 video encoder driver"); MODULE_AUTHOR("Dave Perks"); MODULE_LICENSE("GPL"); - -#define I2C_NAME(s) (s)->name - - static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); -#define dprintk(num, format, args...) \ - do { \ - if (debug >= num) \ - printk(format, ##args); \ - } while (0) - /* ----------------------------------------------------------------------- */ struct adv7175 { @@ -77,33 +58,23 @@ struct adv7175 { #define I2C_ADV7175 0xd4 #define I2C_ADV7176 0x54 -static char adv7175_name[] = "adv7175"; -static char adv7176_name[] = "adv7176"; - static char *inputs[] = { "pass_through", "play_back", "color_bar" }; static char *norms[] = { "PAL", "NTSC", "SECAM->PAL (may not work!)" }; /* ----------------------------------------------------------------------- */ -static inline int -adv7175_write (struct i2c_client *client, - u8 reg, - u8 value) +static inline int adv7175_write(struct i2c_client *client, u8 reg, u8 value) { return i2c_smbus_write_byte_data(client, reg, value); } -static inline int -adv7175_read (struct i2c_client *client, - u8 reg) +static inline int adv7175_read(struct i2c_client *client, u8 reg) { return i2c_smbus_read_byte_data(client, reg); } -static int -adv7175_write_block (struct i2c_client *client, - const u8 *data, - unsigned int len) +static int adv7175_write_block(struct i2c_client *client, + const u8 *data, unsigned int len) { int ret = -1; u8 reg; @@ -123,18 +94,17 @@ adv7175_write_block (struct i2c_client *client, reg++; len -= 2; data += 2; - } while (len >= 2 && data[0] == reg && - block_len < 32); - if ((ret = i2c_master_send(client, block_data, - block_len)) < 0) + } while (len >= 2 && data[0] == reg && block_len < 32); + ret = i2c_master_send(client, block_data, block_len); + if (ret < 0) break; } } else { /* do some slow I2C emulation kind of thing */ while (len >= 2) { reg = *data++; - if ((ret = adv7175_write(client, reg, - *data++)) < 0) + ret = adv7175_write(client, reg, *data++); + if (ret < 0) break; len -= 2; } @@ -143,13 +113,11 @@ adv7175_write_block (struct i2c_client *client, return ret; } -static void -set_subcarrier_freq (struct i2c_client *client, - int pass_through) +static void set_subcarrier_freq(struct i2c_client *client, int pass_through) { /* for some reason pass_through NTSC needs * a different sub-carrier freq to remain stable. */ - if(pass_through) + if (pass_through) adv7175_write(client, 0x02, 0x00); else adv7175_write(client, 0x02, 0x55); @@ -160,12 +128,12 @@ set_subcarrier_freq (struct i2c_client *client, } /* ----------------------------------------------------------------------- */ -// Output filter: S-Video Composite +/* Output filter: S-Video Composite */ -#define MR050 0x11 //0x09 -#define MR060 0x14 //0x0c +#define MR050 0x11 /* 0x09 */ +#define MR060 0x14 /* 0x0c */ -//--------------------------------------------------------------------------- +/* ----------------------------------------------------------------------- */ #define TR0MODE 0x46 #define TR0RST 0x80 @@ -216,15 +184,11 @@ static const unsigned char init_ntsc[] = { 0x06, 0x1a, /* subc. phase */ }; -static int -adv7175_command (struct i2c_client *client, - unsigned int cmd, - void *arg) +static int adv7175_command(struct i2c_client *client, unsigned cmd, void *arg) { struct adv7175 *encoder = i2c_get_clientdata(client); switch (cmd) { - case 0: /* This is just for testing!!! */ adv7175_write_block(client, init_common, @@ -242,15 +206,14 @@ adv7175_command (struct i2c_client *client, VIDEO_ENCODER_SECAM; /* well, hacky */ cap->inputs = 2; cap->outputs = 1; - } break; + } case ENCODER_SET_NORM: { int iarg = *(int *) arg; switch (iarg) { - case VIDEO_MODE_NTSC: adv7175_write_block(client, init_ntsc, sizeof(init_ntsc)); @@ -284,16 +247,13 @@ adv7175_command (struct i2c_client *client, adv7175_write(client, 0x07, TR0MODE); break; default: - dprintk(1, KERN_ERR "%s: illegal norm: %d\n", - I2C_NAME(client), iarg); + v4l_dbg(1, debug, client, "illegal norm: %d\n", iarg); return -EINVAL; - } - dprintk(1, KERN_INFO "%s: switched to %s\n", I2C_NAME(client), - norms[iarg]); + v4l_dbg(1, debug, client, "switched to %s\n", norms[iarg]); encoder->norm = iarg; - } break; + } case ENCODER_SET_INPUT: { @@ -304,7 +264,6 @@ adv7175_command (struct i2c_client *client, *iarg = 2: color bar */ switch (iarg) { - case 0: adv7175_write(client, 0x01, 0x00); @@ -331,7 +290,7 @@ adv7175_command (struct i2c_client *client, adv7175_write(client, 0x0d, 0x49); adv7175_write(client, 0x07, TR0MODE | TR0RST); adv7175_write(client, 0x07, TR0MODE); - //udelay(10); + /* udelay(10); */ break; case 2: @@ -343,39 +302,35 @@ adv7175_command (struct i2c_client *client, adv7175_write(client, 0x0d, 0x49); adv7175_write(client, 0x07, TR0MODE | TR0RST); adv7175_write(client, 0x07, TR0MODE); - //udelay(10); + /* udelay(10); */ break; default: - dprintk(1, KERN_ERR "%s: illegal input: %d\n", - I2C_NAME(client), iarg); + v4l_dbg(1, debug, client, "illegal input: %d\n", iarg); return -EINVAL; - } - dprintk(1, KERN_INFO "%s: switched to %s\n", I2C_NAME(client), - inputs[iarg]); + v4l_dbg(1, debug, client, "switched to %s\n", inputs[iarg]); encoder->input = iarg; - } break; + } case ENCODER_SET_OUTPUT: { int *iarg = arg; /* not much choice of outputs */ - if (*iarg != 0) { + if (*iarg != 0) return -EINVAL; - } - } break; + } case ENCODER_ENABLE_OUTPUT: { int *iarg = arg; encoder->enable = !!*iarg; - } break; + } default: return -EINVAL; @@ -390,145 +345,67 @@ adv7175_command (struct i2c_client *client, * Generic i2c probe * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' */ -static unsigned short normal_i2c[] = - { I2C_ADV7175 >> 1, (I2C_ADV7175 >> 1) + 1, +static unsigned short normal_i2c[] = { + I2C_ADV7175 >> 1, (I2C_ADV7175 >> 1) + 1, I2C_ADV7176 >> 1, (I2C_ADV7176 >> 1) + 1, I2C_CLIENT_END }; -static unsigned short ignore = I2C_CLIENT_END; - -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_i2c, - .probe = &ignore, - .ignore = &ignore, -}; - -static struct i2c_driver i2c_driver_adv7175; +I2C_CLIENT_INSMOD; -static int -adv7175_detect_client (struct i2c_adapter *adapter, - int address, - int kind) +static int adv7175_probe(struct i2c_client *client, + const struct i2c_device_id *id) { int i; - struct i2c_client *client; struct adv7175 *encoder; - char *dname; - - dprintk(1, - KERN_INFO - "adv7175.c: detecting adv7175 client on address 0x%x\n", - address << 1); /* Check if the adapter supports the needed features */ - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return 0; + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) - return -ENOMEM; - client->addr = address; - client->adapter = adapter; - client->driver = &i2c_driver_adv7175; - if ((client->addr == I2C_ADV7175 >> 1) || - (client->addr == (I2C_ADV7175 >> 1) + 1)) { - dname = adv7175_name; - } else if ((client->addr == I2C_ADV7176 >> 1) || - (client->addr == (I2C_ADV7176 >> 1) + 1)) { - dname = adv7176_name; - } else { - /* We should never get here!!! */ - kfree(client); - return 0; - } - strlcpy(I2C_NAME(client), dname, sizeof(I2C_NAME(client))); + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); encoder = kzalloc(sizeof(struct adv7175), GFP_KERNEL); - if (encoder == NULL) { - kfree(client); + if (encoder == NULL) return -ENOMEM; - } encoder->norm = VIDEO_MODE_PAL; encoder->input = 0; encoder->enable = 1; i2c_set_clientdata(client, encoder); - i = i2c_attach_client(client); - if (i) { - kfree(client); - kfree(encoder); - return i; - } - i = adv7175_write_block(client, init_common, sizeof(init_common)); if (i >= 0) { i = adv7175_write(client, 0x07, TR0MODE | TR0RST); i = adv7175_write(client, 0x07, TR0MODE); i = adv7175_read(client, 0x12); - dprintk(1, KERN_INFO "%s_attach: rev. %d at 0x%x\n", - I2C_NAME(client), i & 1, client->addr << 1); + v4l_dbg(1, debug, client, "revision %d\n", i & 1); } - if (i < 0) { - dprintk(1, KERN_ERR "%s_attach: init error 0x%x\n", - I2C_NAME(client), i); - } - + if (i < 0) + v4l_dbg(1, debug, client, "init error 0x%x\n", i); return 0; } -static int -adv7175_attach_adapter (struct i2c_adapter *adapter) -{ - dprintk(1, - KERN_INFO - "adv7175.c: starting probe for adapter %s (0x%x)\n", - I2C_NAME(adapter), adapter->id); - return i2c_probe(adapter, &addr_data, &adv7175_detect_client); -} - -static int -adv7175_detach_client (struct i2c_client *client) +static int adv7175_remove(struct i2c_client *client) { - struct adv7175 *encoder = i2c_get_clientdata(client); - int err; - - err = i2c_detach_client(client); - if (err) { - return err; - } - - kfree(encoder); - kfree(client); - + kfree(i2c_get_clientdata(client)); return 0; } /* ----------------------------------------------------------------------- */ -static struct i2c_driver i2c_driver_adv7175 = { - .driver = { - .name = "adv7175", /* name */ - }, - - .id = I2C_DRIVERID_ADV7175, +static const struct i2c_device_id adv7175_id[] = { + { "adv7175", 0 }, + { "adv7176", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adv7175_id); - .attach_adapter = adv7175_attach_adapter, - .detach_client = adv7175_detach_client, +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "adv7175", + .driverid = I2C_DRIVERID_ADV7175, .command = adv7175_command, + .probe = adv7175_probe, + .remove = adv7175_remove, + .id_table = adv7175_id, }; - -static int __init -adv7175_init (void) -{ - return i2c_add_driver(&i2c_driver_adv7175); -} - -static void __exit -adv7175_exit (void) -{ - i2c_del_driver(&i2c_driver_adv7175); -} - -module_init(adv7175_init); -module_exit(adv7175_exit); diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c index 5f07a8a072b6..d60123b413f5 100644 --- a/drivers/media/video/au0828/au0828-cards.c +++ b/drivers/media/video/au0828/au0828-cards.c @@ -90,6 +90,7 @@ static void hauppauge_eeprom(struct au0828_dev *dev, u8 *eeprom_data) case 72221: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */ case 72231: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */ case 72241: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and basic analog video */ + case 72251: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and basic analog video */ case 72301: /* WinTV-HVR850 (Retail, IR, ATSC and basic analog video */ case 72500: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM */ break; @@ -185,7 +186,7 @@ void au0828_gpio_setup(struct au0828_dev *dev) } /* table of devices that work with this driver */ -struct usb_device_id au0828_usb_id_table [] = { +struct usb_device_id au0828_usb_id_table[] = { { USB_DEVICE(0x2040, 0x7200), .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, { USB_DEVICE(0x2040, 0x7240), @@ -198,6 +199,8 @@ struct usb_device_id au0828_usb_id_table [] = { .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, { USB_DEVICE(0x2040, 0x721b), .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, + { USB_DEVICE(0x2040, 0x721e), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, { USB_DEVICE(0x2040, 0x721f), .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, { USB_DEVICE(0x2040, 0x7280), diff --git a/drivers/media/video/au0828/au0828-core.c b/drivers/media/video/au0828/au0828-core.c index d856de9f742f..5765e8656376 100644 --- a/drivers/media/video/au0828/au0828-core.c +++ b/drivers/media/video/au0828/au0828-core.c @@ -91,7 +91,8 @@ static int send_control_msg(struct au0828_dev *dev, u16 request, u32 value, status = usb_control_msg(dev->usbdev, usb_sndctrlpipe(dev->usbdev, 0), request, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_DEVICE, value, index, cp, size, 1000); diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c index f0fcdb4769d7..a882cf546d0a 100644 --- a/drivers/media/video/au0828/au0828-dvb.c +++ b/drivers/media/video/au0828/au0828-dvb.c @@ -173,7 +173,8 @@ static int start_urb_transfer(struct au0828_dev *dev) purb->status = -EINPROGRESS; usb_fill_bulk_urb(purb, dev->usbdev, - usb_rcvbulkpipe(dev->usbdev, _AU0828_BULKPIPE), + usb_rcvbulkpipe(dev->usbdev, + _AU0828_BULKPIPE), purb->transfer_buffer, URB_BUFSIZE, urb_completion, diff --git a/drivers/media/video/bt819.c b/drivers/media/video/bt819.c index ddd2a7964dec..a07b7b88e5b8 100644 --- a/drivers/media/video/bt819.c +++ b/drivers/media/video/bt819.c @@ -29,44 +29,25 @@ */ #include <linux/module.h> -#include <linux/init.h> #include <linux/delay.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/major.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/signal.h> #include <linux/types.h> -#include <linux/i2c.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> +#include <linux/ioctl.h> #include <asm/uaccess.h> - +#include <linux/i2c.h> +#include <linux/i2c-id.h> #include <linux/videodev.h> #include <linux/video_decoder.h> - +#include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv-legacy.h> MODULE_DESCRIPTION("Brooktree-819 video decoder driver"); MODULE_AUTHOR("Mike Bernson & Dave Perks"); MODULE_LICENSE("GPL"); - -#define I2C_NAME(s) (s)->name - - static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); -#define dprintk(num, format, args...) \ - do { \ - if (debug >= num) \ - printk(format, ##args); \ - } while (0) - /* ----------------------------------------------------------------------- */ struct bt819 { @@ -97,14 +78,9 @@ static struct timing timing_data[] = { {858 - 24, 20, 525 - 2, 1, 0x00f8, 0x0000}, }; -#define I2C_BT819 0x8a - /* ----------------------------------------------------------------------- */ -static inline int -bt819_write (struct i2c_client *client, - u8 reg, - u8 value) +static inline int bt819_write(struct i2c_client *client, u8 reg, u8 value) { struct bt819 *decoder = i2c_get_clientdata(client); @@ -112,24 +88,15 @@ bt819_write (struct i2c_client *client, return i2c_smbus_write_byte_data(client, reg, value); } -static inline int -bt819_setbit (struct i2c_client *client, - u8 reg, - u8 bit, - u8 value) +static inline int bt819_setbit(struct i2c_client *client, u8 reg, u8 bit, u8 value) { struct bt819 *decoder = i2c_get_clientdata(client); return bt819_write(client, reg, - (decoder-> - reg[reg] & ~(1 << bit)) | - (value ? (1 << bit) : 0)); + (decoder->reg[reg] & ~(1 << bit)) | (value ? (1 << bit) : 0)); } -static int -bt819_write_block (struct i2c_client *client, - const u8 *data, - unsigned int len) +static int bt819_write_block(struct i2c_client *client, const u8 *data, unsigned int len) { int ret = -1; u8 reg; @@ -150,10 +117,9 @@ bt819_write_block (struct i2c_client *client, decoder->reg[reg++] = data[1]; len -= 2; data += 2; - } while (len >= 2 && data[0] == reg && - block_len < 32); - if ((ret = i2c_master_send(client, block_data, - block_len)) < 0) + } while (len >= 2 && data[0] == reg && block_len < 32); + ret = i2c_master_send(client, block_data, block_len); + if (ret < 0) break; } } else { @@ -169,20 +135,17 @@ bt819_write_block (struct i2c_client *client, return ret; } -static inline int -bt819_read (struct i2c_client *client, - u8 reg) +static inline int bt819_read(struct i2c_client *client, u8 reg) { return i2c_smbus_read_byte_data(client, reg); } -static int -bt819_init (struct i2c_client *client) +static int bt819_init(struct i2c_client *client) { struct bt819 *decoder = i2c_get_clientdata(client); static unsigned char init[] = { - //0x1f, 0x00, /* Reset */ + /*0x1f, 0x00,*/ /* Reset */ 0x01, 0x59, /* 0x01 input format */ 0x02, 0x00, /* 0x02 temporal decimation */ 0x03, 0x12, /* 0x03 Cropping msb */ @@ -218,12 +181,10 @@ bt819_init (struct i2c_client *client) struct timing *timing = &timing_data[decoder->norm]; init[0x03 * 2 - 1] = - (((timing->vdelay >> 8) & 0x03) << 6) | (((timing-> - vactive >> 8) & - 0x03) << 4) | - (((timing->hdelay >> 8) & 0x03) << 2) | ((timing-> - hactive >> 8) & - 0x03); + (((timing->vdelay >> 8) & 0x03) << 6) | + (((timing->vactive >> 8) & 0x03) << 4) | + (((timing->hdelay >> 8) & 0x03) << 2) | + ((timing->hactive >> 8) & 0x03); init[0x04 * 2 - 1] = timing->vdelay & 0xff; init[0x05 * 2 - 1] = timing->vactive & 0xff; init[0x06 * 2 - 1] = timing->hdelay & 0xff; @@ -238,27 +199,22 @@ bt819_init (struct i2c_client *client) /* init */ return bt819_write_block(client, init, sizeof(init)); - } /* ----------------------------------------------------------------------- */ -static int -bt819_command (struct i2c_client *client, - unsigned int cmd, - void *arg) +static int bt819_command(struct i2c_client *client, unsigned cmd, void *arg) { int temp; struct bt819 *decoder = i2c_get_clientdata(client); - if (!decoder->initialized) { // First call to bt819_init could be - bt819_init(client); // without #FRST = 0 + if (!decoder->initialized) { /* First call to bt819_init could be */ + bt819_init(client); /* without #FRST = 0 */ decoder->initialized = 1; } switch (cmd) { - case 0: /* This is just for testing!!! */ bt819_init(client); @@ -274,8 +230,8 @@ bt819_command (struct i2c_client *client, VIDEO_DECODER_CCIR; cap->inputs = 8; cap->outputs = 1; - } break; + } case DECODER_GET_STATUS: { @@ -285,9 +241,9 @@ bt819_command (struct i2c_client *client, status = bt819_read(client, 0x00); res = 0; - if ((status & 0x80)) { + if ((status & 0x80)) res |= DECODER_STATUS_GOOD; - } + switch (decoder->norm) { case VIDEO_MODE_NTSC: res |= DECODER_STATUS_NTSC; @@ -297,28 +253,25 @@ bt819_command (struct i2c_client *client, break; default: case VIDEO_MODE_AUTO: - if ((status & 0x10)) { + if ((status & 0x10)) res |= DECODER_STATUS_PAL; - } else { + else res |= DECODER_STATUS_NTSC; - } break; } res |= DECODER_STATUS_COLOR; *iarg = res; - dprintk(1, KERN_INFO "%s: get status %x\n", I2C_NAME(client), - *iarg); - } + v4l_dbg(1, debug, client, "get status %x\n", *iarg); break; + } case DECODER_SET_NORM: { int *iarg = arg; struct timing *timing = NULL; - dprintk(1, KERN_INFO "%s: set norm %x\n", I2C_NAME(client), - *iarg); + v4l_dbg(1, debug, client, "set norm %x\n", *iarg); switch (*iarg) { case VIDEO_MODE_NTSC: @@ -327,7 +280,7 @@ bt819_command (struct i2c_client *client, bt819_setbit(client, 0x01, 5, 0); bt819_write(client, 0x18, 0x68); bt819_write(client, 0x19, 0x5d); - //bt819_setbit(client, 0x1a, 5, 1); + /* bt819_setbit(client, 0x1a, 5, 1); */ timing = &timing_data[VIDEO_MODE_NTSC]; break; case VIDEO_MODE_PAL: @@ -336,7 +289,7 @@ bt819_command (struct i2c_client *client, bt819_setbit(client, 0x01, 5, 1); bt819_write(client, 0x18, 0x7f); bt819_write(client, 0x19, 0x72); - //bt819_setbit(client, 0x1a, 5, 0); + /* bt819_setbit(client, 0x1a, 5, 0); */ timing = &timing_data[VIDEO_MODE_PAL]; break; case VIDEO_MODE_AUTO: @@ -344,10 +297,7 @@ bt819_command (struct i2c_client *client, bt819_setbit(client, 0x01, 1, 0); break; default: - dprintk(1, - KERN_ERR - "%s: unsupported norm %d\n", - I2C_NAME(client), *iarg); + v4l_dbg(1, debug, client, "unsupported norm %x\n", *iarg); return -EINVAL; } @@ -366,19 +316,17 @@ bt819_command (struct i2c_client *client, } decoder->norm = *iarg; - } break; + } case DECODER_SET_INPUT: { int *iarg = arg; - dprintk(1, KERN_INFO "%s: set input %x\n", I2C_NAME(client), - *iarg); + v4l_dbg(1, debug, client, "set input %x\n", *iarg); - if (*iarg < 0 || *iarg > 7) { + if (*iarg < 0 || *iarg > 7) return -EINVAL; - } if (decoder->input != *iarg) { decoder->input = *iarg; @@ -391,52 +339,42 @@ bt819_command (struct i2c_client *client, bt819_setbit(client, 0x1a, 1, 0); } } - } break; + } case DECODER_SET_OUTPUT: { int *iarg = arg; - dprintk(1, KERN_INFO "%s: set output %x\n", I2C_NAME(client), - *iarg); + v4l_dbg(1, debug, client, "set output %x\n", *iarg); /* not much choice of outputs */ - if (*iarg != 0) { + if (*iarg != 0) return -EINVAL; - } - } break; + } case DECODER_ENABLE_OUTPUT: { int *iarg = arg; int enable = (*iarg != 0); - dprintk(1, KERN_INFO "%s: enable output %x\n", - I2C_NAME(client), *iarg); + v4l_dbg(1, debug, client, "enable output %x\n", *iarg); if (decoder->enable != enable) { decoder->enable = enable; - - if (decoder->enable) { - bt819_setbit(client, 0x16, 7, 0); - } else { - bt819_setbit(client, 0x16, 7, 1); - } + bt819_setbit(client, 0x16, 7, !enable); } - } break; + } case DECODER_SET_PICTURE: { struct video_picture *pic = arg; - dprintk(1, - KERN_INFO - "%s: set picture brightness %d contrast %d colour %d\n", - I2C_NAME(client), pic->brightness, pic->contrast, - pic->colour); + v4l_dbg(1, debug, client, + "set picture brightness %d contrast %d colour %d\n", + pic->brightness, pic->contrast, pic->colour); if (decoder->bright != pic->brightness) { @@ -474,8 +412,8 @@ bt819_command (struct i2c_client *client, bt819_write(client, 0x0f, 128 - (decoder->hue >> 8)); } - } break; + } default: return -EINVAL; @@ -486,55 +424,44 @@ bt819_command (struct i2c_client *client, /* ----------------------------------------------------------------------- */ -/* - * Generic i2c probe - * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' - */ -static unsigned short normal_i2c[] = { - I2C_BT819 >> 1, - I2C_CLIENT_END, -}; - -static unsigned short ignore = I2C_CLIENT_END; - -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_i2c, - .probe = &ignore, - .ignore = &ignore, -}; +static unsigned short normal_i2c[] = { 0x8a >> 1, I2C_CLIENT_END }; -static struct i2c_driver i2c_driver_bt819; +I2C_CLIENT_INSMOD; -static int -bt819_detect_client (struct i2c_adapter *adapter, - int address, - int kind) +static int bt819_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - int i, id; + int i, ver; struct bt819 *decoder; - struct i2c_client *client; - - dprintk(1, - KERN_INFO - "bt819: detecting bt819 client on address 0x%x\n", - address << 1); + const char *name; /* Check if the adapter supports the needed features */ - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return 0; + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) - return -ENOMEM; - client->addr = address; - client->adapter = adapter; - client->driver = &i2c_driver_bt819; + ver = bt819_read(client, 0x17); + switch (ver & 0xf0) { + case 0x70: + name = "bt819a"; + break; + case 0x60: + name = "bt817a"; + break; + case 0x20: + name = "bt815a"; + break; + default: + v4l_dbg(1, debug, client, + "unknown chip version 0x%02x\n", ver); + return -ENODEV; + } + + v4l_info(client, "%s found @ 0x%x (%s)\n", name, + client->addr << 1, client->adapter->name); decoder = kzalloc(sizeof(struct bt819), GFP_KERNEL); - if (decoder == NULL) { - kfree(client); + if (decoder == NULL) return -ENOMEM; - } decoder->norm = VIDEO_MODE_NTSC; decoder->input = 0; decoder->enable = 1; @@ -545,97 +472,33 @@ bt819_detect_client (struct i2c_adapter *adapter, decoder->initialized = 0; i2c_set_clientdata(client, decoder); - id = bt819_read(client, 0x17); - switch (id & 0xf0) { - case 0x70: - strlcpy(I2C_NAME(client), "bt819a", sizeof(I2C_NAME(client))); - break; - case 0x60: - strlcpy(I2C_NAME(client), "bt817a", sizeof(I2C_NAME(client))); - break; - case 0x20: - strlcpy(I2C_NAME(client), "bt815a", sizeof(I2C_NAME(client))); - break; - default: - dprintk(1, - KERN_ERR - "bt819: unknown chip version 0x%x (ver 0x%x)\n", - id & 0xf0, id & 0x0f); - kfree(decoder); - kfree(client); - return 0; - } - - i = i2c_attach_client(client); - if (i) { - kfree(client); - kfree(decoder); - return i; - } - i = bt819_init(client); - if (i < 0) { - dprintk(1, KERN_ERR "%s_attach: init status %d\n", - I2C_NAME(client), i); - } else { - dprintk(1, - KERN_INFO - "%s_attach: chip version 0x%x at address 0x%x\n", - I2C_NAME(client), id & 0x0f, - client->addr << 1); - } - + if (i < 0) + v4l_dbg(1, debug, client, "init status %d\n", i); return 0; } -static int -bt819_attach_adapter (struct i2c_adapter *adapter) -{ - return i2c_probe(adapter, &addr_data, &bt819_detect_client); -} - -static int -bt819_detach_client (struct i2c_client *client) +static int bt819_remove(struct i2c_client *client) { - struct bt819 *decoder = i2c_get_clientdata(client); - int err; - - err = i2c_detach_client(client); - if (err) { - return err; - } - - kfree(decoder); - kfree(client); - + kfree(i2c_get_clientdata(client)); return 0; } /* ----------------------------------------------------------------------- */ -static struct i2c_driver i2c_driver_bt819 = { - .driver = { - .name = "bt819", - }, - - .id = I2C_DRIVERID_BT819, +static const struct i2c_device_id bt819_id[] = { + { "bt819a", 0 }, + { "bt817a", 0 }, + { "bt815a", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bt819_id); - .attach_adapter = bt819_attach_adapter, - .detach_client = bt819_detach_client, +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "bt819", + .driverid = I2C_DRIVERID_BT819, .command = bt819_command, + .probe = bt819_probe, + .remove = bt819_remove, + .id_table = bt819_id, }; - -static int __init -bt819_init_module (void) -{ - return i2c_add_driver(&i2c_driver_bt819); -} - -static void __exit -bt819_exit (void) -{ - i2c_del_driver(&i2c_driver_bt819); -} - -module_init(bt819_init_module); -module_exit(bt819_exit); diff --git a/drivers/media/video/bt856.c b/drivers/media/video/bt856.c index ab2ce4d7b5de..4213867507f8 100644 --- a/drivers/media/video/bt856.c +++ b/drivers/media/video/bt856.c @@ -29,43 +29,24 @@ */ #include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/major.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/signal.h> #include <linux/types.h> -#include <linux/i2c.h> -#include <linux/video_encoder.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> +#include <linux/ioctl.h> #include <asm/uaccess.h> - +#include <linux/i2c.h> +#include <linux/i2c-id.h> #include <linux/videodev.h> +#include <linux/video_encoder.h> +#include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv-legacy.h> MODULE_DESCRIPTION("Brooktree-856A video encoder driver"); MODULE_AUTHOR("Mike Bernson & Dave Perks"); MODULE_LICENSE("GPL"); - -#define I2C_NAME(s) (s)->name - - static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); -#define dprintk(num, format, args...) \ - do { \ - if (debug >= num) \ - printk(format, ##args); \ - } while (0) - /* ----------------------------------------------------------------------- */ #define BT856_REG_OFFSET 0xDA @@ -78,14 +59,9 @@ struct bt856 { int enable; }; -#define I2C_BT856 0x88 - /* ----------------------------------------------------------------------- */ -static inline int -bt856_write (struct i2c_client *client, - u8 reg, - u8 value) +static inline int bt856_write(struct i2c_client *client, u8 reg, u8 value) { struct bt856 *encoder = i2c_get_clientdata(client); @@ -93,46 +69,36 @@ bt856_write (struct i2c_client *client, return i2c_smbus_write_byte_data(client, reg, value); } -static inline int -bt856_setbit (struct i2c_client *client, - u8 reg, - u8 bit, - u8 value) +static inline int bt856_setbit(struct i2c_client *client, u8 reg, u8 bit, u8 value) { struct bt856 *encoder = i2c_get_clientdata(client); return bt856_write(client, reg, - (encoder-> - reg[reg - BT856_REG_OFFSET] & ~(1 << bit)) | - (value ? (1 << bit) : 0)); + (encoder->reg[reg - BT856_REG_OFFSET] & ~(1 << bit)) | + (value ? (1 << bit) : 0)); } -static void -bt856_dump (struct i2c_client *client) +static void bt856_dump(struct i2c_client *client) { int i; struct bt856 *encoder = i2c_get_clientdata(client); - printk(KERN_INFO "%s: register dump:", I2C_NAME(client)); + v4l_info(client, "register dump:\n"); for (i = 0; i < BT856_NR_REG; i += 2) - printk(" %02x", encoder->reg[i]); - printk("\n"); + printk(KERN_CONT " %02x", encoder->reg[i]); + printk(KERN_CONT "\n"); } /* ----------------------------------------------------------------------- */ -static int -bt856_command (struct i2c_client *client, - unsigned int cmd, - void *arg) +static int bt856_command(struct i2c_client *client, unsigned cmd, void *arg) { struct bt856 *encoder = i2c_get_clientdata(client); switch (cmd) { - case 0: /* This is just for testing!!! */ - dprintk(1, KERN_INFO "bt856: init\n"); + v4l_dbg(1, debug, client, "init\n"); bt856_write(client, 0xdc, 0x18); bt856_write(client, 0xda, 0); bt856_write(client, 0xde, 0); @@ -142,7 +108,6 @@ bt856_command (struct i2c_client *client, bt856_setbit(client, 0xdc, 4, 1); switch (encoder->norm) { - case VIDEO_MODE_NTSC: bt856_setbit(client, 0xdc, 2, 0); break; @@ -163,26 +128,23 @@ bt856_command (struct i2c_client *client, { struct video_encoder_capability *cap = arg; - dprintk(1, KERN_INFO "%s: get capabilities\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "get capabilities\n"); cap->flags = VIDEO_ENCODER_PAL | VIDEO_ENCODER_NTSC | VIDEO_ENCODER_CCIR; cap->inputs = 2; cap->outputs = 1; - } break; + } case ENCODER_SET_NORM: { int *iarg = arg; - dprintk(1, KERN_INFO "%s: set norm %d\n", I2C_NAME(client), - *iarg); + v4l_dbg(1, debug, client, "set norm %d\n", *iarg); switch (*iarg) { - case VIDEO_MODE_NTSC: bt856_setbit(client, 0xdc, 2, 0); break; @@ -195,27 +157,23 @@ bt856_command (struct i2c_client *client, default: return -EINVAL; - } encoder->norm = *iarg; if (debug != 0) bt856_dump(client); - } break; + } case ENCODER_SET_INPUT: { int *iarg = arg; - dprintk(1, KERN_INFO "%s: set input %d\n", I2C_NAME(client), - *iarg); + v4l_dbg(1, debug, client, "set input %d\n", *iarg); /* We only have video bus. * iarg = 0: input is from bt819 * iarg = 1: input is from ZR36060 */ - switch (*iarg) { - case 0: bt856_setbit(client, 0xde, 4, 0); bt856_setbit(client, 0xde, 3, 1); @@ -234,27 +192,24 @@ bt856_command (struct i2c_client *client, break; default: return -EINVAL; - } if (debug != 0) bt856_dump(client); - } break; + } case ENCODER_SET_OUTPUT: { int *iarg = arg; - dprintk(1, KERN_INFO "%s: set output %d\n", I2C_NAME(client), - *iarg); + v4l_dbg(1, debug, client, "set output %d\n", *iarg); /* not much choice of outputs */ - if (*iarg != 0) { + if (*iarg != 0) return -EINVAL; - } - } break; + } case ENCODER_ENABLE_OUTPUT: { @@ -262,10 +217,9 @@ bt856_command (struct i2c_client *client, encoder->enable = !!*iarg; - dprintk(1, KERN_INFO "%s: enable output %d\n", - I2C_NAME(client), encoder->enable); - } + v4l_dbg(1, debug, client, "enable output %d\n", encoder->enable); break; + } default: return -EINVAL; @@ -276,64 +230,29 @@ bt856_command (struct i2c_client *client, /* ----------------------------------------------------------------------- */ -/* - * Generic i2c probe - * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' - */ -static unsigned short normal_i2c[] = { I2C_BT856 >> 1, I2C_CLIENT_END }; - -static unsigned short ignore = I2C_CLIENT_END; - -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_i2c, - .probe = &ignore, - .ignore = &ignore, -}; +static unsigned short normal_i2c[] = { 0x88 >> 1, I2C_CLIENT_END }; -static struct i2c_driver i2c_driver_bt856; +I2C_CLIENT_INSMOD; -static int -bt856_detect_client (struct i2c_adapter *adapter, - int address, - int kind) +static int bt856_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - int i; - struct i2c_client *client; struct bt856 *encoder; - dprintk(1, - KERN_INFO - "bt856.c: detecting bt856 client on address 0x%x\n", - address << 1); - /* Check if the adapter supports the needed features */ - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return 0; + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) - return -ENOMEM; - client->addr = address; - client->adapter = adapter; - client->driver = &i2c_driver_bt856; - strlcpy(I2C_NAME(client), "bt856", sizeof(I2C_NAME(client))); + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); encoder = kzalloc(sizeof(struct bt856), GFP_KERNEL); - if (encoder == NULL) { - kfree(client); + if (encoder == NULL) return -ENOMEM; - } encoder->norm = VIDEO_MODE_NTSC; encoder->enable = 1; i2c_set_clientdata(client, encoder); - i = i2c_attach_client(client); - if (i) { - kfree(client); - kfree(encoder); - return i; - } - bt856_write(client, 0xdc, 0x18); bt856_write(client, 0xda, 0); bt856_write(client, 0xde, 0); @@ -359,65 +278,26 @@ bt856_detect_client (struct i2c_adapter *adapter, if (debug != 0) bt856_dump(client); - - dprintk(1, KERN_INFO "%s_attach: at address 0x%x\n", I2C_NAME(client), - client->addr << 1); - return 0; } -static int -bt856_attach_adapter (struct i2c_adapter *adapter) +static int bt856_remove(struct i2c_client *client) { - dprintk(1, - KERN_INFO - "bt856.c: starting probe for adapter %s (0x%x)\n", - I2C_NAME(adapter), adapter->id); - return i2c_probe(adapter, &addr_data, &bt856_detect_client); -} - -static int -bt856_detach_client (struct i2c_client *client) -{ - struct bt856 *encoder = i2c_get_clientdata(client); - int err; - - err = i2c_detach_client(client); - if (err) { - return err; - } - - kfree(encoder); - kfree(client); - + kfree(i2c_get_clientdata(client)); return 0; } -/* ----------------------------------------------------------------------- */ - -static struct i2c_driver i2c_driver_bt856 = { - .driver = { - .name = "bt856", - }, - - .id = I2C_DRIVERID_BT856, +static const struct i2c_device_id bt856_id[] = { + { "bt856", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bt856_id); - .attach_adapter = bt856_attach_adapter, - .detach_client = bt856_detach_client, +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "bt856", + .driverid = I2C_DRIVERID_BT856, .command = bt856_command, + .probe = bt856_probe, + .remove = bt856_remove, + .id_table = bt856_id, }; - -static int __init -bt856_init (void) -{ - return i2c_add_driver(&i2c_driver_bt856); -} - -static void __exit -bt856_exit (void) -{ - i2c_del_driver(&i2c_driver_bt856); -} - -module_init(bt856_init); -module_exit(bt856_exit); diff --git a/drivers/media/video/bt866.c b/drivers/media/video/bt866.c index 96b415576f0d..596f9e2376be 100644 --- a/drivers/media/video/bt866.c +++ b/drivers/media/video/bt866.c @@ -29,42 +29,28 @@ */ #include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/major.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/signal.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <linux/sched.h> #include <linux/types.h> +#include <linux/ioctl.h> +#include <asm/uaccess.h> #include <linux/i2c.h> - +#include <linux/i2c-id.h> #include <linux/videodev.h> -#include <asm/uaccess.h> - #include <linux/video_encoder.h> +#include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv-legacy.h> +MODULE_DESCRIPTION("Brooktree-866 video encoder driver"); +MODULE_AUTHOR("Mike Bernson & Dave Perks"); MODULE_LICENSE("GPL"); -#define BT866_DEVNAME "bt866" -#define I2C_BT866 0x88 - -MODULE_LICENSE("GPL"); - -#define DEBUG(x) /* Debug driver */ +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); /* ----------------------------------------------------------------------- */ struct bt866 { - struct i2c_client *i2c; - int addr; - unsigned char reg[256]; + u8 reg[256]; int norm; int enable; @@ -74,20 +60,45 @@ struct bt866 { int sat; }; -static int bt866_write(struct bt866 *dev, - unsigned char subaddr, unsigned char data); +static int bt866_write(struct i2c_client *client, u8 subaddr, u8 data) +{ + struct bt866 *encoder = i2c_get_clientdata(client); + u8 buffer[2]; + int err; + + buffer[0] = subaddr; + buffer[1] = data; + + encoder->reg[subaddr] = data; + + v4l_dbg(1, debug, client, "write 0x%02x = 0x%02x\n", subaddr, data); + + for (err = 0; err < 3;) { + if (i2c_master_send(client, buffer, 2) == 2) + break; + err++; + v4l_warn(client, "error #%d writing to 0x%02x\n", + err, subaddr); + schedule_timeout_interruptible(msecs_to_jiffies(100)); + } + if (err == 3) { + v4l_warn(client, "giving up\n"); + return -1; + } + + return 0; +} -static int bt866_do_command(struct bt866 *encoder, - unsigned int cmd, void *arg) +static int bt866_command(struct i2c_client *client, unsigned cmd, void *arg) { + struct bt866 *encoder = i2c_get_clientdata(client); + switch (cmd) { case ENCODER_GET_CAPABILITIES: { struct video_encoder_capability *cap = arg; - DEBUG(printk - (KERN_INFO "%s: get capabilities\n", - encoder->i2c->name)); + v4l_dbg(1, debug, client, "get capabilities\n"); cap->flags = VIDEO_ENCODER_PAL @@ -95,18 +106,16 @@ static int bt866_do_command(struct bt866 *encoder, | VIDEO_ENCODER_CCIR; cap->inputs = 2; cap->outputs = 1; + break; } - break; case ENCODER_SET_NORM: { int *iarg = arg; - DEBUG(printk(KERN_INFO "%s: set norm %d\n", - encoder->i2c->name, *iarg)); + v4l_dbg(1, debug, client, "set norm %d\n", *iarg); switch (*iarg) { - case VIDEO_MODE_NTSC: break; @@ -115,11 +124,10 @@ static int bt866_do_command(struct bt866 *encoder, default: return -EINVAL; - } encoder->norm = *iarg; + break; } - break; case ENCODER_SET_INPUT: { @@ -155,7 +163,7 @@ static int bt866_do_command(struct bt866 *encoder, u8 val; for (i = 0; i < ARRAY_SIZE(init) / 2; i += 2) - bt866_write(encoder, init[i], init[i+1]); + bt866_write(client, init[i], init[i+1]); val = encoder->reg[0xdc]; @@ -164,17 +172,16 @@ static int bt866_do_command(struct bt866 *encoder, else val &= ~0x40; /* !CBSWAP */ - bt866_write(encoder, 0xdc, val); + bt866_write(client, 0xdc, val); val = encoder->reg[0xcc]; if (*iarg == 2) val |= 0x01; /* OSDBAR */ else val &= ~0x01; /* !OSDBAR */ - bt866_write(encoder, 0xcc, val); + bt866_write(client, 0xcc, val); - DEBUG(printk(KERN_INFO "%s: set input %d\n", - encoder->i2c->name, *iarg)); + v4l_dbg(1, debug, client, "set input %d\n", *iarg); switch (*iarg) { case 0: @@ -183,48 +190,44 @@ static int bt866_do_command(struct bt866 *encoder, break; default: return -EINVAL; - } + break; } - break; case ENCODER_SET_OUTPUT: { int *iarg = arg; - DEBUG(printk(KERN_INFO "%s: set output %d\n", - encoder->i2c->name, *iarg)); + v4l_dbg(1, debug, client, "set output %d\n", *iarg); /* not much choice of outputs */ if (*iarg != 0) return -EINVAL; + break; } - break; case ENCODER_ENABLE_OUTPUT: { int *iarg = arg; encoder->enable = !!*iarg; - DEBUG(printk - (KERN_INFO "%s: enable output %d\n", - encoder->i2c->name, encoder->enable)); + v4l_dbg(1, debug, client, "enable output %d\n", encoder->enable); + break; } - break; case 4711: { int *iarg = arg; __u8 val; - printk("bt866: square = %d\n", *iarg); + v4l_dbg(1, debug, client, "square %d\n", *iarg); val = encoder->reg[0xdc]; if (*iarg) val |= 1; /* SQUARE */ else val &= ~1; /* !SQUARE */ - bt866_write(encoder, 0xdc, val); + bt866_write(client, 0xdc, val); break; } @@ -235,141 +238,49 @@ static int bt866_do_command(struct bt866 *encoder, return 0; } -static int bt866_write(struct bt866 *encoder, - unsigned char subaddr, unsigned char data) -{ - unsigned char buffer[2]; - int err; +static unsigned short normal_i2c[] = { 0x88 >> 1, I2C_CLIENT_END }; - buffer[0] = subaddr; - buffer[1] = data; - - encoder->reg[subaddr] = data; +I2C_CLIENT_INSMOD; - DEBUG(printk - ("%s: write 0x%02X = 0x%02X\n", - encoder->i2c->name, subaddr, data)); - - for (err = 0; err < 3;) { - if (i2c_master_send(encoder->i2c, buffer, 2) == 2) - break; - err++; - printk(KERN_WARNING "%s: I/O error #%d " - "(write 0x%02x/0x%02x)\n", - encoder->i2c->name, err, encoder->addr, subaddr); - schedule_timeout_interruptible(msecs_to_jiffies(100)); - } - if (err == 3) { - printk(KERN_WARNING "%s: giving up\n", - encoder->i2c->name); - return -1; - } - - return 0; -} - -static int bt866_attach(struct i2c_adapter *adapter); -static int bt866_detach(struct i2c_client *client); -static int bt866_command(struct i2c_client *client, - unsigned int cmd, void *arg); - - -/* Addresses to scan */ -static unsigned short normal_i2c[] = {I2C_BT866>>1, I2C_CLIENT_END}; -static unsigned short probe[2] = {I2C_CLIENT_END, I2C_CLIENT_END}; -static unsigned short ignore[2] = {I2C_CLIENT_END, I2C_CLIENT_END}; - -static struct i2c_client_address_data addr_data = { - normal_i2c, - probe, - ignore, -}; - -static struct i2c_driver i2c_driver_bt866 = { - .driver.name = BT866_DEVNAME, - .id = I2C_DRIVERID_BT866, - .attach_adapter = bt866_attach, - .detach_client = bt866_detach, - .command = bt866_command -}; - - -static struct i2c_client bt866_client_tmpl = -{ - .name = "(nil)", - .addr = 0, - .adapter = NULL, - .driver = &i2c_driver_bt866, -}; - -static int bt866_found_proc(struct i2c_adapter *adapter, - int addr, int kind) +static int bt866_probe(struct i2c_client *client, + const struct i2c_device_id *id) { struct bt866 *encoder; - struct i2c_client *client; - client = kzalloc(sizeof(*client), GFP_KERNEL); - if (client == NULL) - return -ENOMEM; - memcpy(client, &bt866_client_tmpl, sizeof(*client)); + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); encoder = kzalloc(sizeof(*encoder), GFP_KERNEL); - if (encoder == NULL) { - kfree(client); + if (encoder == NULL) return -ENOMEM; - } i2c_set_clientdata(client, encoder); - client->adapter = adapter; - client->addr = addr; - sprintf(client->name, "%s-%02x", BT866_DEVNAME, adapter->id); - - encoder->i2c = client; - encoder->addr = addr; - //encoder->encoder_type = ENCODER_TYPE_UNKNOWN; - - /* initialize */ - - i2c_attach_client(client); - - return 0; -} - -static int bt866_attach(struct i2c_adapter *adapter) -{ - if (adapter->id == I2C_HW_B_ZR36067) - return i2c_probe(adapter, &addr_data, bt866_found_proc); - return 0; -} - -static int bt866_detach(struct i2c_client *client) -{ - struct bt866 *encoder = i2c_get_clientdata(client); - - i2c_detach_client(client); - kfree(encoder); - kfree(client); - return 0; } -static int bt866_command(struct i2c_client *client, - unsigned int cmd, void *arg) +static int bt866_remove(struct i2c_client *client) { - struct bt866 *encoder = i2c_get_clientdata(client); - return bt866_do_command(encoder, cmd, arg); -} - -static int __devinit bt866_init(void) -{ - i2c_add_driver(&i2c_driver_bt866); + kfree(i2c_get_clientdata(client)); return 0; } -static void __devexit bt866_exit(void) +static int bt866_legacy_probe(struct i2c_adapter *adapter) { - i2c_del_driver(&i2c_driver_bt866); + return adapter->id == I2C_HW_B_ZR36067; } -module_init(bt866_init); -module_exit(bt866_exit); +static const struct i2c_device_id bt866_id[] = { + { "bt866", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bt866_id); + +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "bt866", + .driverid = I2C_DRIVERID_BT866, + .command = bt866_command, + .probe = bt866_probe, + .remove = bt866_remove, + .legacy_probe = bt866_legacy_probe, + .id_table = bt866_id, +}; diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 2cda15f829fd..dac5ccc9ba72 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -39,16 +39,16 @@ struct cx23885_board cx23885_boards[] = { .input = {{ .type = CX23885_VMUX_COMPOSITE1, .vmux = 0, - },{ + }, { .type = CX23885_VMUX_COMPOSITE2, .vmux = 1, - },{ + }, { .type = CX23885_VMUX_COMPOSITE3, .vmux = 2, - },{ + }, { .type = CX23885_VMUX_COMPOSITE4, .vmux = 3, - }}, + } }, }, [CX23885_BOARD_HAUPPAUGE_HVR1800lp] = { .name = "Hauppauge WinTV-HVR1800lp", @@ -57,19 +57,19 @@ struct cx23885_board cx23885_boards[] = { .type = CX23885_VMUX_TELEVISION, .vmux = 0, .gpio0 = 0xff00, - },{ + }, { .type = CX23885_VMUX_DEBUG, .vmux = 0, .gpio0 = 0xff01, - },{ + }, { .type = CX23885_VMUX_COMPOSITE1, .vmux = 1, .gpio0 = 0xff02, - },{ + }, { .type = CX23885_VMUX_SVIDEO, .vmux = 2, .gpio0 = 0xff02, - }}, + } }, }, [CX23885_BOARD_HAUPPAUGE_HVR1800] = { .name = "Hauppauge WinTV-HVR1800", @@ -84,20 +84,20 @@ struct cx23885_board cx23885_boards[] = { CX25840_VIN5_CH2 | CX25840_VIN2_CH1, .gpio0 = 0, - },{ + }, { .type = CX23885_VMUX_COMPOSITE1, .vmux = CX25840_VIN7_CH3 | CX25840_VIN4_CH2 | CX25840_VIN6_CH1, .gpio0 = 0, - },{ + }, { .type = CX23885_VMUX_SVIDEO, .vmux = CX25840_VIN7_CH3 | CX25840_VIN4_CH2 | CX25840_VIN8_CH1 | CX25840_SVIDEO_ON, .gpio0 = 0, - }}, + } }, }, [CX23885_BOARD_HAUPPAUGE_HVR1250] = { .name = "Hauppauge WinTV-HVR1250", @@ -106,19 +106,19 @@ struct cx23885_board cx23885_boards[] = { .type = CX23885_VMUX_TELEVISION, .vmux = 0, .gpio0 = 0xff00, - },{ + }, { .type = CX23885_VMUX_DEBUG, .vmux = 0, .gpio0 = 0xff01, - },{ + }, { .type = CX23885_VMUX_COMPOSITE1, .vmux = 1, .gpio0 = 0xff02, - },{ + }, { .type = CX23885_VMUX_SVIDEO, .vmux = 2, .gpio0 = 0xff02, - }}, + } }, }, [CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP] = { .name = "DViCO FusionHDTV5 Express", @@ -169,43 +169,43 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x0070, .subdevice = 0x3400, .card = CX23885_BOARD_UNKNOWN, - },{ + }, { .subvendor = 0x0070, .subdevice = 0x7600, .card = CX23885_BOARD_HAUPPAUGE_HVR1800lp, - },{ + }, { .subvendor = 0x0070, .subdevice = 0x7800, .card = CX23885_BOARD_HAUPPAUGE_HVR1800, - },{ + }, { .subvendor = 0x0070, .subdevice = 0x7801, .card = CX23885_BOARD_HAUPPAUGE_HVR1800, - },{ + }, { .subvendor = 0x0070, .subdevice = 0x7809, .card = CX23885_BOARD_HAUPPAUGE_HVR1800, - },{ + }, { .subvendor = 0x0070, .subdevice = 0x7911, .card = CX23885_BOARD_HAUPPAUGE_HVR1250, - },{ + }, { .subvendor = 0x18ac, .subdevice = 0xd500, .card = CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP, - },{ + }, { .subvendor = 0x0070, .subdevice = 0x7790, .card = CX23885_BOARD_HAUPPAUGE_HVR1500Q, - },{ + }, { .subvendor = 0x0070, .subdevice = 0x7797, .card = CX23885_BOARD_HAUPPAUGE_HVR1500Q, - },{ + }, { .subvendor = 0x0070, .subdevice = 0x7710, .card = CX23885_BOARD_HAUPPAUGE_HVR1500, - },{ + }, { .subvendor = 0x0070, .subdevice = 0x7717, .card = CX23885_BOARD_HAUPPAUGE_HVR1500, @@ -225,11 +225,11 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x0070, .subdevice = 0x8010, .card = CX23885_BOARD_HAUPPAUGE_HVR1400, - },{ + }, { .subvendor = 0x18ac, .subdevice = 0xd618, .card = CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP, - },{ + }, { .subvendor = 0x18ac, .subdevice = 0xdb78, .card = CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP, @@ -247,23 +247,25 @@ void cx23885_card_list(struct cx23885_dev *dev) if (0 == dev->pci->subsystem_vendor && 0 == dev->pci->subsystem_device) { - printk("%s: Your board has no valid PCIe Subsystem ID and thus can't\n" - "%s: be autodetected. Please pass card=<n> insmod option to\n" - "%s: workaround that. Redirect complaints to the vendor of\n" - "%s: the TV card. Best regards,\n" + printk(KERN_INFO + "%s: Board has no valid PCIe Subsystem ID and can't\n" + "%s: be autodetected. Pass card=<n> insmod option\n" + "%s: to workaround that. Redirect complaints to the\n" + "%s: vendor of the TV card. Best regards,\n" "%s: -- tux\n", dev->name, dev->name, dev->name, dev->name, dev->name); } else { - printk("%s: Your board isn't known (yet) to the driver. You can\n" - "%s: try to pick one of the existing card configs via\n" + printk(KERN_INFO + "%s: Your board isn't known (yet) to the driver.\n" + "%s: Try to pick one of the existing card configs via\n" "%s: card=<n> insmod option. Updating to the latest\n" "%s: version might help as well.\n", dev->name, dev->name, dev->name, dev->name); } - printk("%s: Here is a list of valid choices for the card=<n> insmod option:\n", + printk(KERN_INFO "%s: Here is a list of valid choices for the card=<n> insmod option:\n", dev->name); for (i = 0; i < cx23885_bcount; i++) - printk("%s: card=%d -> %s\n", + printk(KERN_INFO "%s: card=%d -> %s\n", dev->name, i, cx23885_boards[i].name); } @@ -271,11 +273,11 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) { struct tveeprom tv; - tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv, eeprom_data); + tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv, + eeprom_data); /* Make sure we support the board model */ - switch (tv.model) - { + switch (tv.model) { case 71009: /* WinTV-HVR1200 (PCIe, Retail, full height) * DVB-T and basic analog */ @@ -303,21 +305,51 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) case 71999: /* WinTV-HVR1200 (PCIe, OEM, full height) * DVB-T and basic analog */ - case 76601: /* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual channel ATSC and MPEG2 HW Encoder */ - case 77001: /* WinTV-HVR1500 (Express Card, OEM, No IR, ATSC and Basic analog */ - case 77011: /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC and Basic analog */ - case 77041: /* WinTV-HVR1500Q (Express Card, OEM, No IR, ATSC/QAM and Basic analog */ - case 77051: /* WinTV-HVR1500Q (Express Card, Retail, No IR, ATSC/QAM and Basic analog */ - case 78011: /* WinTV-HVR1800 (PCIe, Retail, 3.5mm in, IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */ - case 78501: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, Dual channel ATSC and MPEG2 HW Encoder */ - case 78521: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, Dual channel ATSC and MPEG2 HW Encoder */ - case 78531: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */ - case 78631: /* WinTV-HVR1800 (PCIe, OEM, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */ - case 79001: /* WinTV-HVR1250 (PCIe, Retail, IR, full height, ATSC and Basic analog */ - case 79101: /* WinTV-HVR1250 (PCIe, Retail, IR, half height, ATSC and Basic analog */ - case 79561: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */ - case 79571: /* WinTV-HVR1250 (PCIe, OEM, No IR, full height, ATSC and Basic analog */ - case 79671: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */ + case 76601: + /* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual + channel ATSC and MPEG2 HW Encoder */ + case 77001: + /* WinTV-HVR1500 (Express Card, OEM, No IR, ATSC + and Basic analog */ + case 77011: + /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC + and Basic analog */ + case 77041: + /* WinTV-HVR1500Q (Express Card, OEM, No IR, ATSC/QAM + and Basic analog */ + case 77051: + /* WinTV-HVR1500Q (Express Card, Retail, No IR, ATSC/QAM + and Basic analog */ + case 78011: + /* WinTV-HVR1800 (PCIe, Retail, 3.5mm in, IR, No FM, + Dual channel ATSC and MPEG2 HW Encoder */ + case 78501: + /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, + Dual channel ATSC and MPEG2 HW Encoder */ + case 78521: + /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, + Dual channel ATSC and MPEG2 HW Encoder */ + case 78531: + /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, No FM, + Dual channel ATSC and MPEG2 HW Encoder */ + case 78631: + /* WinTV-HVR1800 (PCIe, OEM, No IR, No FM, + Dual channel ATSC and MPEG2 HW Encoder */ + case 79001: + /* WinTV-HVR1250 (PCIe, Retail, IR, full height, + ATSC and Basic analog */ + case 79101: + /* WinTV-HVR1250 (PCIe, Retail, IR, half height, + ATSC and Basic analog */ + case 79561: + /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, + ATSC and Basic analog */ + case 79571: + /* WinTV-HVR1250 (PCIe, OEM, No IR, full height, + ATSC and Basic analog */ + case 79671: + /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, + ATSC and Basic analog */ case 80019: /* WinTV-HVR1400 (Express Card, Retail, IR, * DVB-T and Basic analog */ @@ -329,7 +361,8 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) * DVB-T and MPEG2 HW Encoder */ break; default: - printk("%s: warning: unknown hauppauge model #%d\n", dev->name, tv.model); + printk(KERN_WARNING "%s: warning: unknown hauppauge model #%d\n", + dev->name, tv.model); break; } @@ -352,7 +385,7 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg) return -EINVAL; } - switch(dev->board) { + switch (dev->board) { case CX23885_BOARD_HAUPPAUGE_HVR1400: case CX23885_BOARD_HAUPPAUGE_HVR1500: case CX23885_BOARD_HAUPPAUGE_HVR1500Q: @@ -383,7 +416,7 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg) void cx23885_gpio_setup(struct cx23885_dev *dev) { - switch(dev->board) { + switch (dev->board) { case CX23885_BOARD_HAUPPAUGE_HVR1250: /* GPIO-0 cx24227 demodulator reset */ cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */ @@ -617,10 +650,3 @@ void cx23885_card_setup(struct cx23885_dev *dev) } /* ------------------------------------------------------------------ */ - -/* - * Local variables: - * c-basic-offset: 8 - * End: - * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off - */ diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c index beb3e61669a3..8f6fb2add7de 100644 --- a/drivers/media/video/cx23885/cx23885-core.c +++ b/drivers/media/video/cx23885/cx23885-core.c @@ -37,12 +37,12 @@ MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>"); MODULE_LICENSE("GPL"); static unsigned int debug; -module_param(debug,int,0644); -MODULE_PARM_DESC(debug,"enable debug messages"); +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "enable debug messages"); static unsigned int card[] = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET }; module_param_array(card, int, NULL, 0444); -MODULE_PARM_DESC(card,"card type"); +MODULE_PARM_DESC(card, "card type"); #define dprintk(level, fmt, arg...)\ do { if (debug >= level)\ @@ -364,13 +364,12 @@ void cx23885_wakeup(struct cx23885_tsport *port, list_del(&buf->vb.queue); wake_up(&buf->vb.done); } - if (list_empty(&q->active)) { + if (list_empty(&q->active)) del_timer(&q->timeout); - } else { + else mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT); - } if (bc != 1) - printk("%s: %d buffers handled (should be 1)\n", + printk(KERN_WARNING "%s: %d buffers handled (should be 1)\n", __func__, bc); } @@ -381,8 +380,7 @@ int cx23885_sram_channel_setup(struct cx23885_dev *dev, unsigned int i, lines; u32 cdt; - if (ch->cmds_start == 0) - { + if (ch->cmds_start == 0) { dprintk(1, "%s() Erasing channel [%s]\n", __func__, ch->name); cx_write(ch->ptr1_reg, 0); @@ -418,15 +416,15 @@ int cx23885_sram_channel_setup(struct cx23885_dev *dev, /* write CMDS */ if (ch->jumponly) - cx_write(ch->cmds_start + 0, 8); + cx_write(ch->cmds_start + 0, 8); else - cx_write(ch->cmds_start + 0, risc); + cx_write(ch->cmds_start + 0, risc); cx_write(ch->cmds_start + 4, 0); /* 64 bits 63-32 */ cx_write(ch->cmds_start + 8, cdt); cx_write(ch->cmds_start + 12, (lines*16) >> 3); cx_write(ch->cmds_start + 16, ch->ctrl_start); if (ch->jumponly) - cx_write(ch->cmds_start + 20, 0x80000000 | (64 >> 2) ); + cx_write(ch->cmds_start + 20, 0x80000000 | (64 >> 2)); else cx_write(ch->cmds_start + 20, 64 >> 2); for (i = 24; i < 80; i += 4) @@ -436,9 +434,9 @@ int cx23885_sram_channel_setup(struct cx23885_dev *dev, cx_write(ch->ptr1_reg, ch->fifo_start); cx_write(ch->ptr2_reg, cdt); cx_write(ch->cnt2_reg, (lines*16) >> 3); - cx_write(ch->cnt1_reg, (bpl >> 3) -1); + cx_write(ch->cnt1_reg, (bpl >> 3) - 1); - dprintk(2,"[bridge %d] sram setup %s: bpl=%d lines=%d\n", + dprintk(2, "[bridge %d] sram setup %s: bpl=%d lines=%d\n", dev->bridge, ch->name, bpl, @@ -469,43 +467,43 @@ void cx23885_sram_channel_dump(struct cx23885_dev *dev, u32 risc; unsigned int i, j, n; - printk("%s: %s - dma channel status dump\n", + printk(KERN_WARNING "%s: %s - dma channel status dump\n", dev->name, ch->name); for (i = 0; i < ARRAY_SIZE(name); i++) - printk("%s: cmds: %-15s: 0x%08x\n", + printk(KERN_WARNING "%s: cmds: %-15s: 0x%08x\n", dev->name, name[i], cx_read(ch->cmds_start + 4*i)); for (i = 0; i < 4; i++) { risc = cx_read(ch->cmds_start + 4 * (i + 14)); - printk("%s: risc%d: ", dev->name, i); + printk(KERN_WARNING "%s: risc%d: ", dev->name, i); cx23885_risc_decode(risc); } for (i = 0; i < (64 >> 2); i += n) { risc = cx_read(ch->ctrl_start + 4 * i); /* No consideration for bits 63-32 */ - printk("%s: (0x%08x) iq %x: ", dev->name, + printk(KERN_WARNING "%s: (0x%08x) iq %x: ", dev->name, ch->ctrl_start + 4 * i, i); n = cx23885_risc_decode(risc); for (j = 1; j < n; j++) { risc = cx_read(ch->ctrl_start + 4 * (i + j)); - printk("%s: iq %x: 0x%08x [ arg #%d ]\n", + printk(KERN_WARNING "%s: iq %x: 0x%08x [ arg #%d ]\n", dev->name, i+j, risc, j); } } - printk("%s: fifo: 0x%08x -> 0x%x\n", + printk(KERN_WARNING "%s: fifo: 0x%08x -> 0x%x\n", dev->name, ch->fifo_start, ch->fifo_start+ch->fifo_size); - printk("%s: ctrl: 0x%08x -> 0x%x\n", + printk(KERN_WARNING "%s: ctrl: 0x%08x -> 0x%x\n", dev->name, ch->ctrl_start, ch->ctrl_start + 6*16); - printk("%s: ptr1_reg: 0x%08x\n", + printk(KERN_WARNING "%s: ptr1_reg: 0x%08x\n", dev->name, cx_read(ch->ptr1_reg)); - printk("%s: ptr2_reg: 0x%08x\n", + printk(KERN_WARNING "%s: ptr2_reg: 0x%08x\n", dev->name, cx_read(ch->ptr2_reg)); - printk("%s: cnt1_reg: 0x%08x\n", + printk(KERN_WARNING "%s: cnt1_reg: 0x%08x\n", dev->name, cx_read(ch->cnt1_reg)); - printk("%s: cnt2_reg: 0x%08x\n", + printk(KERN_WARNING "%s: cnt2_reg: 0x%08x\n", dev->name, cx_read(ch->cnt2_reg)); } @@ -515,13 +513,13 @@ static void cx23885_risc_disasm(struct cx23885_tsport *port, struct cx23885_dev *dev = port->dev; unsigned int i, j, n; - printk("%s: risc disasm: %p [dma=0x%08lx]\n", + printk(KERN_INFO "%s: risc disasm: %p [dma=0x%08lx]\n", dev->name, risc->cpu, (unsigned long)risc->dma); for (i = 0; i < (risc->size >> 2); i += n) { - printk("%s: %04d: ", dev->name, i); + printk(KERN_INFO "%s: %04d: ", dev->name, i); n = cx23885_risc_decode(le32_to_cpu(risc->cpu[i])); for (j = 1; j < n; j++) - printk("%s: %04d: 0x%08x [ arg #%d ]\n", + printk(KERN_INFO "%s: %04d: 0x%08x [ arg #%d ]\n", dev->name, i + j, risc->cpu[i + j], j); if (risc->cpu[i] == cpu_to_le32(RISC_JUMP)) break; @@ -600,7 +598,7 @@ static int cx23885_pci_quirks(struct cx23885_dev *dev) * when DMA begins if RDR_TLCTL0 bit4 is not cleared. It does not * occur on the cx23887 bridge. */ - if(dev->bridge == CX23885_BRIDGE_885) + if (dev->bridge == CX23885_BRIDGE_885) cx_clear(RDR_TLCTL0, 1 << 4); return 0; @@ -608,13 +606,13 @@ static int cx23885_pci_quirks(struct cx23885_dev *dev) static int get_resources(struct cx23885_dev *dev) { - if (request_mem_region(pci_resource_start(dev->pci,0), - pci_resource_len(dev->pci,0), + if (request_mem_region(pci_resource_start(dev->pci, 0), + pci_resource_len(dev->pci, 0), dev->name)) return 0; printk(KERN_ERR "%s: can't get MMIO memory @ 0x%llx\n", - dev->name, (unsigned long long)pci_resource_start(dev->pci,0)); + dev->name, (unsigned long long)pci_resource_start(dev->pci, 0)); return -EBUSY; } @@ -623,7 +621,8 @@ static void cx23885_timeout(unsigned long data); int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, u32 reg, u32 mask, u32 value); -static int cx23885_init_tsport(struct cx23885_dev *dev, struct cx23885_tsport *port, int portno) +static int cx23885_init_tsport(struct cx23885_dev *dev, + struct cx23885_tsport *port, int portno) { dprintk(1, "%s(portno=%d)\n", __func__, portno); @@ -643,7 +642,18 @@ static int cx23885_init_tsport(struct cx23885_dev *dev, struct cx23885_tsport *p port->mpegq.timeout.data = (unsigned long)port; init_timer(&port->mpegq.timeout); - switch(portno) { + mutex_init(&port->frontends.lock); + INIT_LIST_HEAD(&port->frontends.felist); + port->frontends.active_fe_id = 0; + + /* This should be hardcoded allow a single frontend + * attachment to this tsport, keeping the -dvb.c + * code clean and safe. + */ + if (!port->num_frontends) + port->num_frontends = 1; + + switch (portno) { case 1: port->reg_gpcnt = VID_B_GPCNT; port->reg_gpcnt_ctl = VID_B_GPCNT_CTL; @@ -744,13 +754,13 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) mutex_unlock(&devlist); /* Configure the internal memory */ - if(dev->pci->device == 0x8880) { + if (dev->pci->device == 0x8880) { dev->bridge = CX23885_BRIDGE_887; /* Apply a sensible clock frequency for the PCIe bridge */ dev->clk_freq = 25000000; dev->sram_channels = cx23887_sram_channels; } else - if(dev->pci->device == 0x8852) { + if (dev->pci->device == 0x8852) { dev->bridge = CX23885_BRIDGE_885; /* Apply a sensible clock frequency for the PCIe bridge */ dev->clk_freq = 28000000; @@ -831,8 +841,8 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) } /* PCIe stuff */ - dev->lmmio = ioremap(pci_resource_start(dev->pci,0), - pci_resource_len(dev->pci,0)); + dev->lmmio = ioremap(pci_resource_start(dev->pci, 0), + pci_resource_len(dev->pci, 0)); dev->bmmio = (u8 __iomem *)dev->lmmio; @@ -862,7 +872,7 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) cx23885_i2c_register(&dev->i2c_bus[1]); cx23885_i2c_register(&dev->i2c_bus[2]); cx23885_card_setup(dev); - cx23885_call_i2c_clients (&dev->i2c_bus[0], TUNER_SET_STANDBY, NULL); + cx23885_call_i2c_clients(&dev->i2c_bus[0], TUNER_SET_STANDBY, NULL); cx23885_ir_init(dev); if (cx23885_boards[dev->board].porta == CX23885_ANALOG_VIDEO) { @@ -908,8 +918,8 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) static void cx23885_dev_unregister(struct cx23885_dev *dev) { - release_mem_region(pci_resource_start(dev->pci,0), - pci_resource_len(dev->pci,0)); + release_mem_region(pci_resource_start(dev->pci, 0), + pci_resource_len(dev->pci, 0)); if (!atomic_dec_and_test(&dev->refcount)) return; @@ -936,7 +946,7 @@ static void cx23885_dev_unregister(struct cx23885_dev *dev) iounmap(dev->lmmio); } -static __le32* cx23885_risc_field(__le32 *rp, struct scatterlist *sglist, +static __le32 *cx23885_risc_field(__le32 *rp, struct scatterlist *sglist, unsigned int offset, u32 sync_line, unsigned int bpl, unsigned int padding, unsigned int lines) @@ -957,31 +967,31 @@ static __le32* cx23885_risc_field(__le32 *rp, struct scatterlist *sglist, } if (bpl <= sg_dma_len(sg)-offset) { /* fits into current chunk */ - *(rp++)=cpu_to_le32(RISC_WRITE|RISC_SOL|RISC_EOL|bpl); - *(rp++)=cpu_to_le32(sg_dma_address(sg)+offset); - *(rp++)=cpu_to_le32(0); /* bits 63-32 */ - offset+=bpl; + *(rp++) = cpu_to_le32(RISC_WRITE|RISC_SOL|RISC_EOL|bpl); + *(rp++) = cpu_to_le32(sg_dma_address(sg)+offset); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + offset += bpl; } else { /* scanline needs to be split */ todo = bpl; - *(rp++)=cpu_to_le32(RISC_WRITE|RISC_SOL| + *(rp++) = cpu_to_le32(RISC_WRITE|RISC_SOL| (sg_dma_len(sg)-offset)); - *(rp++)=cpu_to_le32(sg_dma_address(sg)+offset); - *(rp++)=cpu_to_le32(0); /* bits 63-32 */ + *(rp++) = cpu_to_le32(sg_dma_address(sg)+offset); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ todo -= (sg_dma_len(sg)-offset); offset = 0; sg++; while (todo > sg_dma_len(sg)) { - *(rp++)=cpu_to_le32(RISC_WRITE| + *(rp++) = cpu_to_le32(RISC_WRITE| sg_dma_len(sg)); - *(rp++)=cpu_to_le32(sg_dma_address(sg)); - *(rp++)=cpu_to_le32(0); /* bits 63-32 */ + *(rp++) = cpu_to_le32(sg_dma_address(sg)); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ todo -= sg_dma_len(sg); sg++; } - *(rp++)=cpu_to_le32(RISC_WRITE|RISC_EOL|todo); - *(rp++)=cpu_to_le32(sg_dma_address(sg)); - *(rp++)=cpu_to_le32(0); /* bits 63-32 */ + *(rp++) = cpu_to_le32(RISC_WRITE|RISC_EOL|todo); + *(rp++) = cpu_to_le32(sg_dma_address(sg)); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ offset += todo; } offset += padding; @@ -1010,9 +1020,11 @@ int cx23885_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc, can cause next bpl to start close to a page border. First DMA region may be smaller than PAGE_SIZE */ /* write and jump need and extra dword */ - instructions = fields * (1 + ((bpl + padding) * lines) / PAGE_SIZE + lines); + instructions = fields * (1 + ((bpl + padding) * lines) + / PAGE_SIZE + lines); instructions += 2; - if ((rc = btcx_riscmem_alloc(pci,risc,instructions*12)) < 0) + rc = btcx_riscmem_alloc(pci, risc, instructions*12); + if (rc < 0) return rc; /* write risc instructions */ @@ -1026,7 +1038,7 @@ int cx23885_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc, /* save pointer to jmp instruction address */ risc->jmp = rp; - BUG_ON((risc->jmp - risc->cpu + 2) * sizeof (*risc->cpu) > risc->size); + BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size); return 0; } @@ -1048,7 +1060,8 @@ static int cx23885_risc_databuffer(struct pci_dev *pci, instructions = 1 + (bpl * lines) / PAGE_SIZE + lines; instructions += 1; - if ((rc = btcx_riscmem_alloc(pci,risc,instructions*12)) < 0) + rc = btcx_riscmem_alloc(pci, risc, instructions*12); + if (rc < 0) return rc; /* write risc instructions */ @@ -1057,7 +1070,7 @@ static int cx23885_risc_databuffer(struct pci_dev *pci, /* save pointer to jmp instruction address */ risc->jmp = rp; - BUG_ON((risc->jmp - risc->cpu + 2) * sizeof (*risc->cpu) > risc->size); + BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size); return 0; } @@ -1067,7 +1080,8 @@ int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, __le32 *rp; int rc; - if ((rc = btcx_riscmem_alloc(pci, risc, 4*16)) < 0) + rc = btcx_riscmem_alloc(pci, risc, 4*16); + if (rc < 0) return rc; /* write risc instructions */ @@ -1161,22 +1175,23 @@ static int cx23885_start_dma(struct cx23885_tsport *port, /* setup fifo + format */ cx23885_sram_channel_setup(dev, - &dev->sram_channels[ port->sram_chno ], + &dev->sram_channels[port->sram_chno], port->ts_packet_size, buf->risc.dma); - if(debug > 5) { - cx23885_sram_channel_dump(dev, &dev->sram_channels[ port->sram_chno ] ); + if (debug > 5) { + cx23885_sram_channel_dump(dev, + &dev->sram_channels[port->sram_chno]); cx23885_risc_disasm(port, &buf->risc); } /* write TS length to chip */ cx_write(port->reg_lngth, buf->vb.width); - if ( (!(cx23885_boards[dev->board].portb & CX23885_MPEG_DVB)) && - (!(cx23885_boards[dev->board].portc & CX23885_MPEG_DVB)) ) { - printk( "%s() Failed. Unsupported value in .portb/c (0x%08x)/(0x%08x)\n", + if ((!(cx23885_boards[dev->board].portb & CX23885_MPEG_DVB)) && + (!(cx23885_boards[dev->board].portc & CX23885_MPEG_DVB))) { + printk("%s() Unsupported .portb/c (0x%08x)/(0x%08x)\n", __func__, cx23885_boards[dev->board].portb, - cx23885_boards[dev->board].portc ); + cx23885_boards[dev->board].portc); return -EINVAL; } @@ -1186,7 +1201,7 @@ static int cx23885_start_dma(struct cx23885_tsport *port, udelay(100); /* If the port supports SRC SELECT, configure it */ - if(port->reg_src_sel) + if (port->reg_src_sel) cx_write(port->reg_src_sel, port->src_sel_val); cx_write(port->reg_hw_sop_ctrl, port->hw_sop_ctrl_val); @@ -1195,7 +1210,7 @@ static int cx23885_start_dma(struct cx23885_tsport *port, cx_write(port->reg_gen_ctrl, port->gen_ctrl_val); udelay(100); - // NOTE: this is 2 (reserved) for portb, does it matter? + /* NOTE: this is 2 (reserved) for portb, does it matter? */ /* reset counter to zero */ cx_write(port->reg_gpcnt_ctl, 3); q->count = 1; @@ -1229,11 +1244,11 @@ static int cx23885_start_dma(struct cx23885_tsport *port, cx_write(ALT_PIN_OUT_SEL, 0x10100045); } - switch(dev->bridge) { + switch (dev->bridge) { case CX23885_BRIDGE_885: case CX23885_BRIDGE_887: /* enable irqs */ - dprintk(1, "%s() enabling TS int's and DMA\n", __func__ ); + dprintk(1, "%s() enabling TS int's and DMA\n", __func__); cx_set(port->reg_ts_int_msk, port->ts_int_msk_val); cx_set(port->reg_dma_ctl, port->dma_ctl_val); cx_set(PCI_INT_MSK, dev->pci_irqmask | port->pci_irqmask); @@ -1292,8 +1307,7 @@ int cx23885_restart_queue(struct cx23885_tsport *port, struct cx23885_buffer *buf; dprintk(5, "%s()\n", __func__); - if (list_empty(&q->active)) - { + if (list_empty(&q->active)) { struct cx23885_buffer *prev; prev = NULL; @@ -1311,7 +1325,7 @@ int cx23885_restart_queue(struct cx23885_tsport *port, buf->vb.state = VIDEOBUF_ACTIVE; buf->count = q->count++; mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); - dprintk(5, "[%p/%d] restart_queue - first active\n", + dprintk(5, "[%p/%d] restart_queue - f/active\n", buf, buf->vb.i); } else if (prev->vb.width == buf->vb.width && @@ -1322,8 +1336,9 @@ int cx23885_restart_queue(struct cx23885_tsport *port, buf->vb.state = VIDEOBUF_ACTIVE; buf->count = q->count++; prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); - prev->risc.jmp[2] = cpu_to_le32(0); /* 64 bit bits 63-32 */ - dprintk(5,"[%p/%d] restart_queue - move to active\n", + /* 64 bit bits 63-32 */ + prev->risc.jmp[2] = cpu_to_le32(0); + dprintk(5, "[%p/%d] restart_queue - m/active\n", buf, buf->vb.i); } else { return 0; @@ -1362,7 +1377,8 @@ int cx23885_buf_prepare(struct videobuf_queue *q, struct cx23885_tsport *port, buf->vb.size = size; buf->vb.field = field /*V4L2_FIELD_TOP*/; - if (0 != (rc = videobuf_iolock(q, &buf->vb, NULL))) + rc = videobuf_iolock(q, &buf->vb, NULL); + if (0 != rc) goto fail; cx23885_risc_databuffer(dev->pci, &buf->risc, videobuf_to_dma(&buf->vb)->sglist, @@ -1388,7 +1404,7 @@ void cx23885_buf_queue(struct cx23885_tsport *port, struct cx23885_buffer *buf) buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */ if (list_empty(&cx88q->active)) { - dprintk( 1, "queue is empty - first active\n" ); + dprintk(1, "queue is empty - first active\n"); list_add_tail(&buf->vb.queue, &cx88q->active); cx23885_start_dma(port, cx88q, buf); buf->vb.state = VIDEOBUF_ACTIVE; @@ -1397,7 +1413,7 @@ void cx23885_buf_queue(struct cx23885_tsport *port, struct cx23885_buffer *buf) dprintk(1, "[%p/%d] %s - first active\n", buf, buf->vb.i, __func__); } else { - dprintk( 1, "queue is not empty - append to active\n" ); + dprintk(1, "queue is not empty - append to active\n"); prev = list_entry(cx88q->active.prev, struct cx23885_buffer, vb.queue); list_add_tail(&buf->vb.queue, &cx88q->active); @@ -1405,7 +1421,7 @@ void cx23885_buf_queue(struct cx23885_tsport *port, struct cx23885_buffer *buf) buf->count = cx88q->count++; prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); prev->risc.jmp[2] = cpu_to_le32(0); /* 64 bit bits 63-32 */ - dprintk( 1, "[%p/%d] %s - append to active\n", + dprintk(1, "[%p/%d] %s - append to active\n", buf, buf->vb.i, __func__); } } @@ -1431,7 +1447,7 @@ static void do_cancel_buffers(struct cx23885_tsport *port, char *reason, buf, buf->vb.i, reason, (unsigned long)buf->risc.dma); } if (restart) { - dprintk(1, "restarting queue\n" ); + dprintk(1, "restarting queue\n"); cx23885_restart_queue(port, q); } spin_unlock_irqrestore(&port->slock, flags); @@ -1453,10 +1469,11 @@ static void cx23885_timeout(unsigned long data) struct cx23885_tsport *port = (struct cx23885_tsport *)data; struct cx23885_dev *dev = port->dev; - dprintk(1, "%s()\n",__func__); + dprintk(1, "%s()\n", __func__); if (debug > 5) - cx23885_sram_channel_dump(dev, &dev->sram_channels[ port->sram_chno ]); + cx23885_sram_channel_dump(dev, + &dev->sram_channels[port->sram_chno]); cx23885_stop_dma(port); do_cancel_buffers(port, "timeout", 1); @@ -1532,16 +1549,23 @@ static int cx23885_irq_ts(struct cx23885_tsport *port, u32 status) if ((status & VID_BC_MSK_OPC_ERR) || (status & VID_BC_MSK_BAD_PKT) || (status & VID_BC_MSK_SYNC) || - (status & VID_BC_MSK_OF)) - { + (status & VID_BC_MSK_OF)) { + if (status & VID_BC_MSK_OPC_ERR) - dprintk(7, " (VID_BC_MSK_OPC_ERR 0x%08x)\n", VID_BC_MSK_OPC_ERR); + dprintk(7, " (VID_BC_MSK_OPC_ERR 0x%08x)\n", + VID_BC_MSK_OPC_ERR); + if (status & VID_BC_MSK_BAD_PKT) - dprintk(7, " (VID_BC_MSK_BAD_PKT 0x%08x)\n", VID_BC_MSK_BAD_PKT); + dprintk(7, " (VID_BC_MSK_BAD_PKT 0x%08x)\n", + VID_BC_MSK_BAD_PKT); + if (status & VID_BC_MSK_SYNC) - dprintk(7, " (VID_BC_MSK_SYNC 0x%08x)\n", VID_BC_MSK_SYNC); + dprintk(7, " (VID_BC_MSK_SYNC 0x%08x)\n", + VID_BC_MSK_SYNC); + if (status & VID_BC_MSK_OF) - dprintk(7, " (VID_BC_MSK_OF 0x%08x)\n", VID_BC_MSK_OF); + dprintk(7, " (VID_BC_MSK_OF 0x%08x)\n", + VID_BC_MSK_OF); printk(KERN_ERR "%s: mpeg risc op code error\n", dev->name); @@ -1595,7 +1619,7 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id) ts2_status = cx_read(VID_C_INT_STAT); ts2_mask = cx_read(VID_C_INT_MSK); - if ( (pci_status == 0) && (ts2_status == 0) && (ts1_status == 0) ) + if ((pci_status == 0) && (ts2_status == 0) && (ts1_status == 0)) goto out; vida_count = cx_read(VID_A_GPCNT); @@ -1610,38 +1634,56 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id) dprintk(7, "ts2_status: 0x%08x ts2_mask: 0x%08x count: 0x%x\n", ts2_status, ts2_mask, ts2_count); - if ( (pci_status & PCI_MSK_RISC_RD) || - (pci_status & PCI_MSK_RISC_WR) || - (pci_status & PCI_MSK_AL_RD) || - (pci_status & PCI_MSK_AL_WR) || - (pci_status & PCI_MSK_APB_DMA) || - (pci_status & PCI_MSK_VID_C) || - (pci_status & PCI_MSK_VID_B) || - (pci_status & PCI_MSK_VID_A) || - (pci_status & PCI_MSK_AUD_INT) || - (pci_status & PCI_MSK_AUD_EXT) ) - { + if ((pci_status & PCI_MSK_RISC_RD) || + (pci_status & PCI_MSK_RISC_WR) || + (pci_status & PCI_MSK_AL_RD) || + (pci_status & PCI_MSK_AL_WR) || + (pci_status & PCI_MSK_APB_DMA) || + (pci_status & PCI_MSK_VID_C) || + (pci_status & PCI_MSK_VID_B) || + (pci_status & PCI_MSK_VID_A) || + (pci_status & PCI_MSK_AUD_INT) || + (pci_status & PCI_MSK_AUD_EXT)) { if (pci_status & PCI_MSK_RISC_RD) - dprintk(7, " (PCI_MSK_RISC_RD 0x%08x)\n", PCI_MSK_RISC_RD); + dprintk(7, " (PCI_MSK_RISC_RD 0x%08x)\n", + PCI_MSK_RISC_RD); + if (pci_status & PCI_MSK_RISC_WR) - dprintk(7, " (PCI_MSK_RISC_WR 0x%08x)\n", PCI_MSK_RISC_WR); + dprintk(7, " (PCI_MSK_RISC_WR 0x%08x)\n", + PCI_MSK_RISC_WR); + if (pci_status & PCI_MSK_AL_RD) - dprintk(7, " (PCI_MSK_AL_RD 0x%08x)\n", PCI_MSK_AL_RD); + dprintk(7, " (PCI_MSK_AL_RD 0x%08x)\n", + PCI_MSK_AL_RD); + if (pci_status & PCI_MSK_AL_WR) - dprintk(7, " (PCI_MSK_AL_WR 0x%08x)\n", PCI_MSK_AL_WR); + dprintk(7, " (PCI_MSK_AL_WR 0x%08x)\n", + PCI_MSK_AL_WR); + if (pci_status & PCI_MSK_APB_DMA) - dprintk(7, " (PCI_MSK_APB_DMA 0x%08x)\n", PCI_MSK_APB_DMA); + dprintk(7, " (PCI_MSK_APB_DMA 0x%08x)\n", + PCI_MSK_APB_DMA); + if (pci_status & PCI_MSK_VID_C) - dprintk(7, " (PCI_MSK_VID_C 0x%08x)\n", PCI_MSK_VID_C); + dprintk(7, " (PCI_MSK_VID_C 0x%08x)\n", + PCI_MSK_VID_C); + if (pci_status & PCI_MSK_VID_B) - dprintk(7, " (PCI_MSK_VID_B 0x%08x)\n", PCI_MSK_VID_B); + dprintk(7, " (PCI_MSK_VID_B 0x%08x)\n", + PCI_MSK_VID_B); + if (pci_status & PCI_MSK_VID_A) - dprintk(7, " (PCI_MSK_VID_A 0x%08x)\n", PCI_MSK_VID_A); + dprintk(7, " (PCI_MSK_VID_A 0x%08x)\n", + PCI_MSK_VID_A); + if (pci_status & PCI_MSK_AUD_INT) - dprintk(7, " (PCI_MSK_AUD_INT 0x%08x)\n", PCI_MSK_AUD_INT); + dprintk(7, " (PCI_MSK_AUD_INT 0x%08x)\n", + PCI_MSK_AUD_INT); + if (pci_status & PCI_MSK_AUD_EXT) - dprintk(7, " (PCI_MSK_AUD_EXT 0x%08x)\n", PCI_MSK_AUD_EXT); + dprintk(7, " (PCI_MSK_AUD_EXT 0x%08x)\n", + PCI_MSK_AUD_EXT); } @@ -1753,13 +1795,13 @@ static struct pci_device_id cx23885_pci_tbl[] = { .device = 0x8852, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - },{ + }, { /* CX23887 Rev 2 */ .vendor = 0x14f1, .device = 0x8880, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - },{ + }, { /* --- end of list --- */ } }; @@ -1797,9 +1839,3 @@ module_init(cx23885_init); module_exit(cx23885_fini); /* ----------------------------------------------------------- */ -/* - * Local variables: - * c-basic-offset: 8 - * End: - * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off - */ diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 24bd18327aa0..e1aac07b3158 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -78,19 +78,19 @@ static int dvb_buf_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, enum v4l2_field field) { struct cx23885_tsport *port = q->priv_data; - return cx23885_buf_prepare(q, port, (struct cx23885_buffer*)vb, field); + return cx23885_buf_prepare(q, port, (struct cx23885_buffer *)vb, field); } static void dvb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) { struct cx23885_tsport *port = q->priv_data; - cx23885_buf_queue(port, (struct cx23885_buffer*)vb); + cx23885_buf_queue(port, (struct cx23885_buffer *)vb); } static void dvb_buf_release(struct videobuf_queue *q, struct videobuf_buffer *vb) { - cx23885_free_buffer(q, (struct cx23885_buffer*)vb); + cx23885_free_buffer(q, (struct cx23885_buffer *)vb); } static struct videobuf_queue_ops dvb_qops = { @@ -312,19 +312,25 @@ static int dvb_register(struct cx23885_tsport *port) { struct cx23885_dev *dev = port->dev; struct cx23885_i2c *i2c_bus = NULL; + struct videobuf_dvb_frontend *fe0; + + /* Get the first frontend */ + fe0 = videobuf_dvb_get_frontend(&port->frontends, 1); + if (!fe0) + return -EINVAL; /* init struct videobuf_dvb */ - port->dvb.name = dev->name; + fe0->dvb.name = dev->name; /* init frontend */ switch (dev->board) { case CX23885_BOARD_HAUPPAUGE_HVR1250: i2c_bus = &dev->i2c_bus[0]; - port->dvb.frontend = dvb_attach(s5h1409_attach, + fe0->dvb.frontend = dvb_attach(s5h1409_attach, &hauppauge_generic_config, &i2c_bus->i2c_adap); - if (port->dvb.frontend != NULL) { - dvb_attach(mt2131_attach, port->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + dvb_attach(mt2131_attach, fe0->dvb.frontend, &i2c_bus->i2c_adap, &hauppauge_generic_tunerconfig, 0); } @@ -333,27 +339,27 @@ static int dvb_register(struct cx23885_tsport *port) i2c_bus = &dev->i2c_bus[0]; switch (alt_tuner) { case 1: - port->dvb.frontend = + fe0->dvb.frontend = dvb_attach(s5h1409_attach, &hauppauge_ezqam_config, &i2c_bus->i2c_adap); - if (port->dvb.frontend != NULL) { - dvb_attach(tda829x_attach, port->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda829x_attach, fe0->dvb.frontend, &dev->i2c_bus[1].i2c_adap, 0x42, &tda829x_no_probe); - dvb_attach(tda18271_attach, port->dvb.frontend, + dvb_attach(tda18271_attach, fe0->dvb.frontend, 0x60, &dev->i2c_bus[1].i2c_adap, &hauppauge_tda18271_config); } break; case 0: default: - port->dvb.frontend = + fe0->dvb.frontend = dvb_attach(s5h1409_attach, &hauppauge_generic_config, &i2c_bus->i2c_adap); - if (port->dvb.frontend != NULL) - dvb_attach(mt2131_attach, port->dvb.frontend, + if (fe0->dvb.frontend != NULL) + dvb_attach(mt2131_attach, fe0->dvb.frontend, &i2c_bus->i2c_adap, &hauppauge_generic_tunerconfig, 0); break; @@ -361,42 +367,42 @@ static int dvb_register(struct cx23885_tsport *port) break; case CX23885_BOARD_HAUPPAUGE_HVR1800lp: i2c_bus = &dev->i2c_bus[0]; - port->dvb.frontend = dvb_attach(s5h1409_attach, + fe0->dvb.frontend = dvb_attach(s5h1409_attach, &hauppauge_hvr1800lp_config, &i2c_bus->i2c_adap); - if (port->dvb.frontend != NULL) { - dvb_attach(mt2131_attach, port->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + dvb_attach(mt2131_attach, fe0->dvb.frontend, &i2c_bus->i2c_adap, &hauppauge_generic_tunerconfig, 0); } break; case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP: i2c_bus = &dev->i2c_bus[0]; - port->dvb.frontend = dvb_attach(lgdt330x_attach, + fe0->dvb.frontend = dvb_attach(lgdt330x_attach, &fusionhdtv_5_express, &i2c_bus->i2c_adap); - if (port->dvb.frontend != NULL) { - dvb_attach(simple_tuner_attach, port->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &i2c_bus->i2c_adap, 0x61, TUNER_LG_TDVS_H06XF); } break; case CX23885_BOARD_HAUPPAUGE_HVR1500Q: i2c_bus = &dev->i2c_bus[1]; - port->dvb.frontend = dvb_attach(s5h1409_attach, + fe0->dvb.frontend = dvb_attach(s5h1409_attach, &hauppauge_hvr1500q_config, &dev->i2c_bus[0].i2c_adap); - if (port->dvb.frontend != NULL) - dvb_attach(xc5000_attach, port->dvb.frontend, + if (fe0->dvb.frontend != NULL) + dvb_attach(xc5000_attach, fe0->dvb.frontend, &i2c_bus->i2c_adap, &hauppauge_hvr1500q_tunerconfig); break; case CX23885_BOARD_HAUPPAUGE_HVR1500: i2c_bus = &dev->i2c_bus[1]; - port->dvb.frontend = dvb_attach(s5h1409_attach, + fe0->dvb.frontend = dvb_attach(s5h1409_attach, &hauppauge_hvr1500_config, &dev->i2c_bus[0].i2c_adap); - if (port->dvb.frontend != NULL) { + if (fe0->dvb.frontend != NULL) { struct dvb_frontend *fe; struct xc2028_config cfg = { .i2c_adap = &i2c_bus->i2c_adap, @@ -409,7 +415,7 @@ static int dvb_register(struct cx23885_tsport *port) }; fe = dvb_attach(xc2028_attach, - port->dvb.frontend, &cfg); + fe0->dvb.frontend, &cfg); if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) fe->ops.tuner_ops.set_config(fe, &ctl); } @@ -417,24 +423,24 @@ static int dvb_register(struct cx23885_tsport *port) case CX23885_BOARD_HAUPPAUGE_HVR1200: case CX23885_BOARD_HAUPPAUGE_HVR1700: i2c_bus = &dev->i2c_bus[0]; - port->dvb.frontend = dvb_attach(tda10048_attach, + fe0->dvb.frontend = dvb_attach(tda10048_attach, &hauppauge_hvr1200_config, &i2c_bus->i2c_adap); - if (port->dvb.frontend != NULL) { - dvb_attach(tda829x_attach, port->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda829x_attach, fe0->dvb.frontend, &dev->i2c_bus[1].i2c_adap, 0x42, &tda829x_no_probe); - dvb_attach(tda18271_attach, port->dvb.frontend, + dvb_attach(tda18271_attach, fe0->dvb.frontend, 0x60, &dev->i2c_bus[1].i2c_adap, &hauppauge_hvr1200_tuner_config); } break; case CX23885_BOARD_HAUPPAUGE_HVR1400: i2c_bus = &dev->i2c_bus[0]; - port->dvb.frontend = dvb_attach(dib7000p_attach, + fe0->dvb.frontend = dvb_attach(dib7000p_attach, &i2c_bus->i2c_adap, 0x12, &hauppauge_hvr1400_dib7000_config); - if (port->dvb.frontend != NULL) { + if (fe0->dvb.frontend != NULL) { struct dvb_frontend *fe; struct xc2028_config cfg = { .i2c_adap = &dev->i2c_bus[1].i2c_adap, @@ -444,12 +450,13 @@ static int dvb_register(struct cx23885_tsport *port) .fname = XC3028L_DEFAULT_FIRMWARE, .max_len = 64, .demod = 5000, - /* This is true for all demods with v36 firmware? */ + /* This is true for all demods with + v36 firmware? */ .type = XC2028_D2633, }; fe = dvb_attach(xc2028_attach, - port->dvb.frontend, &cfg); + fe0->dvb.frontend, &cfg); if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) fe->ops.tuner_ops.set_config(fe, &ctl); } @@ -457,25 +464,25 @@ static int dvb_register(struct cx23885_tsport *port) case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: i2c_bus = &dev->i2c_bus[port->nr - 1]; - port->dvb.frontend = dvb_attach(s5h1409_attach, + fe0->dvb.frontend = dvb_attach(s5h1409_attach, &dvico_s5h1409_config, &i2c_bus->i2c_adap); - if (port->dvb.frontend == NULL) - port->dvb.frontend = dvb_attach(s5h1411_attach, + if (fe0->dvb.frontend == NULL) + fe0->dvb.frontend = dvb_attach(s5h1411_attach, &dvico_s5h1411_config, &i2c_bus->i2c_adap); - if (port->dvb.frontend != NULL) - dvb_attach(xc5000_attach, port->dvb.frontend, + if (fe0->dvb.frontend != NULL) + dvb_attach(xc5000_attach, fe0->dvb.frontend, &i2c_bus->i2c_adap, &dvico_xc5000_tunerconfig); break; case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: { i2c_bus = &dev->i2c_bus[port->nr - 1]; - port->dvb.frontend = dvb_attach(zl10353_attach, + fe0->dvb.frontend = dvb_attach(zl10353_attach, &dvico_fusionhdtv_xc3028, &i2c_bus->i2c_adap); - if (port->dvb.frontend != NULL) { + if (fe0->dvb.frontend != NULL) { struct dvb_frontend *fe; struct xc2028_config cfg = { .i2c_adap = &i2c_bus->i2c_adap, @@ -487,7 +494,7 @@ static int dvb_register(struct cx23885_tsport *port) .demod = XC3028_FE_ZARLINK456, }; - fe = dvb_attach(xc2028_attach, port->dvb.frontend, + fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg); if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) fe->ops.tuner_ops.set_config(fe, &ctl); @@ -497,10 +504,10 @@ static int dvb_register(struct cx23885_tsport *port) case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: i2c_bus = &dev->i2c_bus[0]; - port->dvb.frontend = dvb_attach(zl10353_attach, + fe0->dvb.frontend = dvb_attach(zl10353_attach, &dvico_fusionhdtv_xc3028, &i2c_bus->i2c_adap); - if (port->dvb.frontend != NULL) { + if (fe0->dvb.frontend != NULL) { struct dvb_frontend *fe; struct xc2028_config cfg = { .i2c_adap = &dev->i2c_bus[1].i2c_adap, @@ -512,73 +519,108 @@ static int dvb_register(struct cx23885_tsport *port) .demod = XC3028_FE_ZARLINK456, }; - fe = dvb_attach(xc2028_attach, port->dvb.frontend, + fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg); if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) fe->ops.tuner_ops.set_config(fe, &ctl); } break; default: - printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n", + printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " + " isn't supported yet\n", dev->name); break; } - if (NULL == port->dvb.frontend) { - printk("%s: frontend initialization failed\n", dev->name); + if (NULL == fe0->dvb.frontend) { + printk(KERN_ERR "%s: frontend initialization failed\n", + dev->name); return -1; } /* define general-purpose callback pointer */ - port->dvb.frontend->callback = cx23885_tuner_callback; + fe0->dvb.frontend->callback = cx23885_tuner_callback; /* Put the analog decoder in standby to keep it quiet */ cx23885_call_i2c_clients(i2c_bus, TUNER_SET_STANDBY, NULL); - if (port->dvb.frontend->ops.analog_ops.standby) - port->dvb.frontend->ops.analog_ops.standby(port->dvb.frontend); + if (fe0->dvb.frontend->ops.analog_ops.standby) + fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend); /* register everything */ - return videobuf_dvb_register(&port->dvb, THIS_MODULE, port, - &dev->pci->dev, adapter_nr); + return videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port, + &dev->pci->dev, adapter_nr, 0); + } int cx23885_dvb_register(struct cx23885_tsport *port) { + + struct videobuf_dvb_frontend *fe0; struct cx23885_dev *dev = port->dev; - int err; + int err, i; + + /* Here we need to allocate the correct number of frontends, + * as reflected in the cards struct. The reality is that currrently + * no cx23885 boards support this - yet. But, if we don't modify this + * code then the second frontend would never be allocated (later) + * and fail with error before the attach in dvb_register(). + * Without these changes we risk an OOPS later. The changes here + * are for safety, and should provide a good foundation for the + * future addition of any multi-frontend cx23885 based boards. + */ + printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, + port->num_frontends); + + for (i = 1; i <= port->num_frontends; i++) { + if (videobuf_dvb_alloc_frontend( + &port->frontends, i) == NULL) { + printk(KERN_ERR "%s() failed to alloc\n", __func__); + return -ENOMEM; + } - dprintk(1, "%s\n", __func__); - dprintk(1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n", - dev->board, - dev->name, - dev->pci_bus, - dev->pci_slot); + fe0 = videobuf_dvb_get_frontend(&port->frontends, i); + if (!fe0) + err = -EINVAL; - err = -ENODEV; + dprintk(1, "%s\n", __func__); + dprintk(1, " ->probed by Card=%d Name=%s, PCI %02x:%02x\n", + dev->board, + dev->name, + dev->pci_bus, + dev->pci_slot); - /* dvb stuff */ - printk("%s: cx23885 based dvb card\n", dev->name); - videobuf_queue_sg_init(&port->dvb.dvbq, &dvb_qops, &dev->pci->dev, &port->slock, + err = -ENODEV; + + /* dvb stuff */ + /* We have to init the queue for each frontend on a port. */ + printk(KERN_INFO "%s: cx23885 based dvb card\n", dev->name); + videobuf_queue_sg_init(&fe0->dvb.dvbq, &dvb_qops, + &dev->pci->dev, &port->slock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP, sizeof(struct cx23885_buffer), port); + } err = dvb_register(port); if (err != 0) - printk("%s() dvb_register failed err = %d\n", __func__, err); + printk(KERN_ERR "%s() dvb_register failed err = %d\n", + __func__, err); return err; } int cx23885_dvb_unregister(struct cx23885_tsport *port) { - /* dvb */ - if(port->dvb.frontend) - videobuf_dvb_unregister(&port->dvb); + struct videobuf_dvb_frontend *fe0; + + /* FIXME: in an error condition where the we have + * an expected number of frontends (attach problem) + * then this might not clean up correctly, if 1 + * is invalid. + * This comment only applies to future boards IF they + * implement MFE support. + */ + fe0 = videobuf_dvb_get_frontend(&port->frontends, 1); + if (fe0->dvb.frontend) + videobuf_dvb_unregister_bus(&port->frontends); return 0; } -/* - * Local variables: - * c-basic-offset: 8 - * End: - * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off -*/ diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c index f98e476e9617..bb7f71a1fcbe 100644 --- a/drivers/media/video/cx23885/cx23885-i2c.c +++ b/drivers/media/video/cx23885/cx23885-i2c.c @@ -131,7 +131,7 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap, printk(" >\n"); } - for (cnt = 1; cnt < msg->len; cnt++ ) { + for (cnt = 1; cnt < msg->len; cnt++) { /* following bytes */ wdata = msg->buf[cnt]; ctrl = bus->i2c_period | (1 << 12) | (1 << 2); @@ -151,9 +151,9 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap, if (retval == 0) goto eio; if (i2c_debug) { - printk(" %02x", msg->buf[cnt]); + dprintk(1, " %02x", msg->buf[cnt]); if (!(ctrl & I2C_NOSTOP)) - printk(" >\n"); + dprintk(1, " >\n"); } } return msg->len; @@ -162,7 +162,7 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap, retval = -EIO; err: if (i2c_debug) - printk(" ERR: %d\n", retval); + printk(KERN_ERR " ERR: %d\n", retval); return retval; } @@ -194,12 +194,12 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap, if (i2c_debug) { if (joined) - printk(" R"); + dprintk(1, " R"); else - printk(" <R %02x", (msg->addr << 1) + 1); + dprintk(1, " <R %02x", (msg->addr << 1) + 1); } - for(cnt = 0; cnt < msg->len; cnt++) { + for (cnt = 0; cnt < msg->len; cnt++) { ctrl = bus->i2c_period | (1 << 12) | (1 << 2) | 1; @@ -216,9 +216,9 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap, goto eio; msg->buf[cnt] = cx_read(bus->reg_rdata) & 0xff; if (i2c_debug) { - printk(" %02x", msg->buf[cnt]); + dprintk(1, " %02x", msg->buf[cnt]); if (!(ctrl & I2C_NOSTOP)) - printk(" >\n"); + dprintk(1, " >\n"); } } return msg->len; @@ -227,7 +227,7 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap, retval = -EIO; err: if (i2c_debug) - printk(" ERR: %d\n", retval); + printk(KERN_ERR " ERR: %d\n", retval); return retval; } @@ -353,17 +353,17 @@ static struct i2c_client cx23885_i2c_client_template = { }; static char *i2c_devs[128] = { - [0x10 >> 1] = "tda10048", - [0x12 >> 1] = "dib7000pc", - [ 0x1c >> 1 ] = "lgdt3303", - [ 0x86 >> 1 ] = "tda9887", - [ 0x32 >> 1 ] = "cx24227", - [ 0x88 >> 1 ] = "cx25837", - [ 0x84 >> 1 ] = "tda8295", - [ 0xa0 >> 1 ] = "eeprom", - [ 0xc0 >> 1 ] = "tuner/mt2131/tda8275", + [0x10 >> 1] = "tda10048", + [0x12 >> 1] = "dib7000pc", + [0x1c >> 1] = "lgdt3303", + [0x86 >> 1] = "tda9887", + [0x32 >> 1] = "cx24227", + [0x88 >> 1] = "cx25837", + [0x84 >> 1] = "tda8295", + [0xa0 >> 1] = "eeprom", + [0xc0 >> 1] = "tuner/mt2131/tda8275", [0xc2 >> 1] = "tuner/mt2131/tda8275/xc5000/xc3028", - [0xc8 >> 1] = "tuner/xc3028L", + [0xc8 >> 1] = "tuner/xc3028L", }; static void do_i2c_scan(char *name, struct i2c_client *c) @@ -376,7 +376,7 @@ static void do_i2c_scan(char *name, struct i2c_client *c) rc = i2c_master_recv(c, &buf, 0); if (rc < 0) continue; - printk("%s: i2c scan: found device @ 0x%x [%s]\n", + printk(KERN_INFO "%s: i2c scan: found device @ 0x%x [%s]\n", name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???"); } } @@ -408,11 +408,12 @@ int cx23885_i2c_register(struct cx23885_i2c *bus) bus->i2c_client.adapter = &bus->i2c_adap; if (0 == bus->i2c_rc) { - printk("%s: i2c bus %d registered\n", dev->name, bus->nr); + dprintk(1, "%s: i2c bus %d registered\n", dev->name, bus->nr); if (i2c_scan) do_i2c_scan(dev->name, &bus->i2c_client); } else - printk("%s: i2c bus %d register FAILED\n", dev->name, bus->nr); + printk(KERN_WARNING "%s: i2c bus %d register FAILED\n", + dev->name, bus->nr); return bus->i2c_rc; } diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c index f75ed1c9b71a..ab3110d6046c 100644 --- a/drivers/media/video/cx23885/cx23885-video.c +++ b/drivers/media/video/cx23885/cx23885-video.c @@ -285,11 +285,10 @@ static void cx23885_video_wakeup(struct cx23885_dev *dev, list_del(&buf->vb.queue); wake_up(&buf->vb.done); } - if (list_empty(&q->active)) { + if (list_empty(&q->active)) del_timer(&q->timeout); - } else { + else mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); - } if (bc != 1) printk(KERN_ERR "%s: %d buffers handled (should be 1)\n", __func__, bc); @@ -379,12 +378,12 @@ static int res_get(struct cx23885_dev *dev, struct cx23885_fh *fh, static int res_check(struct cx23885_fh *fh, unsigned int bit) { - return (fh->resources & bit); + return fh->resources & bit; } static int res_locked(struct cx23885_dev *dev, unsigned int bit) { - return (dev->resources & bit); + return dev->resources & bit; } static void res_free(struct cx23885_dev *dev, struct cx23885_fh *fh, @@ -887,14 +886,16 @@ static int video_mmap(struct file *file, struct vm_area_struct *vma) /* ------------------------------------------------------------------ */ /* VIDEO CTRL IOCTLS */ -static int cx23885_get_control(struct cx23885_dev *dev, struct v4l2_control *ctl) +static int cx23885_get_control(struct cx23885_dev *dev, + struct v4l2_control *ctl) { dprintk(1, "%s() calling cx25840(VIDIOC_G_CTRL)\n", __func__); cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_G_CTRL, ctl); return 0; } -static int cx23885_set_control(struct cx23885_dev *dev, struct v4l2_control *ctl) +static int cx23885_set_control(struct cx23885_dev *dev, + struct v4l2_control *ctl) { dprintk(1, "%s() calling cx25840(VIDIOC_S_CTRL)" " (disabled - no action)\n", __func__); @@ -1073,29 +1074,29 @@ static int vidioc_reqbufs(struct file *file, void *priv, struct v4l2_requestbuffers *p) { struct cx23885_fh *fh = priv; - return (videobuf_reqbufs(get_queue(fh), p)); + return videobuf_reqbufs(get_queue(fh), p); } static int vidioc_querybuf(struct file *file, void *priv, struct v4l2_buffer *p) { struct cx23885_fh *fh = priv; - return (videobuf_querybuf(get_queue(fh), p)); + return videobuf_querybuf(get_queue(fh), p); } static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *p) { struct cx23885_fh *fh = priv; - return (videobuf_qbuf(get_queue(fh), p)); + return videobuf_qbuf(get_queue(fh), p); } static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p) { struct cx23885_fh *fh = priv; - return (videobuf_dqbuf(get_queue(fh), p, - file->f_flags & O_NONBLOCK)); + return videobuf_dqbuf(get_queue(fh), p, + file->f_flags & O_NONBLOCK); } static int vidioc_streamon(struct file *file, void *priv, diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index ba4e0aaed463..1d53f54cd943 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -37,7 +37,7 @@ #include <linux/version.h> #include <linux/mutex.h> -#define CX23885_VERSION_CODE KERNEL_VERSION(0,0,1) +#define CX23885_VERSION_CODE KERNEL_VERSION(0, 0, 1) #define UNSET (-1U) @@ -225,7 +225,7 @@ struct cx23885_tsport { int nr; int sram_chno; - struct videobuf_dvb dvb; + struct videobuf_dvb_frontends frontends; /* dma queues */ struct cx23885_dmaqueue mpegq; @@ -262,6 +262,9 @@ struct cx23885_tsport { u32 src_sel_val; u32 vld_misc_val; u32 hw_sop_ctrl_val; + + /* Allow a single tsport to have multiple frontends */ + u32 num_frontends; }; struct cx23885_dev { @@ -367,14 +370,14 @@ struct sram_channel { /* ----------------------------------------------------------- */ #define cx_read(reg) readl(dev->lmmio + ((reg)>>2)) -#define cx_write(reg,value) writel((value), dev->lmmio + ((reg)>>2)) +#define cx_write(reg, value) writel((value), dev->lmmio + ((reg)>>2)) -#define cx_andor(reg,mask,value) \ +#define cx_andor(reg, mask, value) \ writel((readl(dev->lmmio+((reg)>>2)) & ~(mask)) |\ ((value) & (mask)), dev->lmmio+((reg)>>2)) -#define cx_set(reg,bit) cx_andor((reg),(bit),(bit)) -#define cx_clear(reg,bit) cx_andor((reg),(bit),0) +#define cx_set(reg, bit) cx_andor((reg), (bit), (bit)) +#define cx_clear(reg, bit) cx_andor((reg), (bit), 0) /* ----------------------------------------------------------- */ /* cx23885-core.c */ @@ -411,7 +414,8 @@ extern const unsigned int cx23885_bcount; extern struct cx23885_subid cx23885_subids[]; extern const unsigned int cx23885_idcount; -extern int cx23885_tuner_callback(void *priv, int component, int command, int arg); +extern int cx23885_tuner_callback(void *priv, int component, + int command, int arg); extern void cx23885_card_list(struct cx23885_dev *dev); extern int cx23885_ir_init(struct cx23885_dev *dev); extern void cx23885_gpio_setup(struct cx23885_dev *dev); @@ -479,11 +483,3 @@ static inline unsigned int norm_swidth(v4l2_std_id norm) { return (norm & (V4L2_STD_MN & ~V4L2_STD_PAL_Nc)) ? 754 : 922; } - - -/* - * Local variables: - * c-basic-offset: 8 - * End: - * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off - */ diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index 5da04e811ca2..fbc224f46e0e 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1270,27 +1270,40 @@ static const struct cx88_board cx88_boards[] = { .mpeg = CX88_MPEG_DVB, }, [CX88_BOARD_HAUPPAUGE_HVR3000] = { - /* FIXME: Add dvb & radio support */ .name = "Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T", .tuner_type = TUNER_PHILIPS_FMD1216ME_MK3, .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .tda9887_conf = TDA9887_PRESENT, + .audio_chip = V4L2_IDENT_WM8775, .input = {{ .type = CX88_VMUX_TELEVISION, .vmux = 0, .gpio0 = 0x84bf, + /* 1: TV Audio / FM Mono */ + .audioroute = 1, },{ .type = CX88_VMUX_COMPOSITE1, .vmux = 1, .gpio0 = 0x84bf, + /* 2: Line-In */ + .audioroute = 2, },{ .type = CX88_VMUX_SVIDEO, .vmux = 2, .gpio0 = 0x84bf, + /* 2: Line-In */ + .audioroute = 2, }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x84bf, + /* 4: FM Stereo (untested) */ + .audioroute = 8, + }, .mpeg = CX88_MPEG_DVB, + .num_frontends = 2, }, [CX88_BOARD_NORWOOD_MICRO] = { .name = "Norwood Micro TV Tuner", @@ -1356,23 +1369,27 @@ static const struct cx88_board cx88_boards[] = { .type = CX88_VMUX_TELEVISION, .vmux = 0, .gpio0 = 0xef88, + /* 1: TV Audio / FM Mono */ .audioroute = 1, },{ .type = CX88_VMUX_COMPOSITE1, .vmux = 1, .gpio0 = 0xef88, + /* 2: Line-In */ .audioroute = 2, },{ .type = CX88_VMUX_SVIDEO, .vmux = 2, .gpio0 = 0xef88, + /* 2: Line-In */ .audioroute = 2, }}, - /* fixme: Add radio support */ .mpeg = CX88_MPEG_DVB | CX88_MPEG_BLACKBIRD, .radio = { .type = CX88_RADIO, .gpio0 = 0xef88, + /* 4: FM Stereo (untested) */ + .audioroute = 8, }, }, [CX88_BOARD_ADSTECH_PTV_390] = { @@ -1716,6 +1733,7 @@ static const struct cx88_board cx88_boards[] = { .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .tda9887_conf = TDA9887_PRESENT, + .audio_chip = V4L2_IDENT_WM8775, /* * GPIO0 (WINTV2000) * @@ -1729,7 +1747,7 @@ static const struct cx88_board cx88_boards[] = { * BIT VALUE FUNCTION GP{x}_IO * 0 1 I:? * 1 1 I:? - * 2 1 O:DVB-T DEMOD ENABLE LOW/ANALOG DEMOD ENABLE HIGH + * 2 1 O:MPEG PORT 0=DVB-T 1=DVB-S * 3 1 I:? * 4 1 I:? * 5 1 I:? @@ -1745,22 +1763,41 @@ static const struct cx88_board cx88_boards[] = { * d 0 I * e 1 O * f 1 O + * + * WM8775 ADC + * + * 1: TV Audio / FM Mono + * 2: Line-In + * 3: Line-In Expansion + * 4: FM Stereo */ .input = {{ .type = CX88_VMUX_TELEVISION, .vmux = 0, .gpio0 = 0xc4bf, + /* 1: TV Audio / FM Mono */ + .audioroute = 1, }, { .type = CX88_VMUX_COMPOSITE1, .vmux = 1, .gpio0 = 0xc4bf, + /* 2: Line-In */ + .audioroute = 2, }, { .type = CX88_VMUX_SVIDEO, .vmux = 2, .gpio0 = 0xc4bf, + /* 2: Line-In */ + .audioroute = 2, } }, - /* fixme: Add radio support */ + .radio = { + .type = CX88_RADIO, + .gpio0 = 0xc4bf, + /* 4: FM Stereo */ + .audioroute = 8, + }, .mpeg = CX88_MPEG_DVB, + .num_frontends = 2, }, [CX88_BOARD_HAUPPAUGE_HVR4000LITE] = { .name = "Hauppauge WinTV-HVR4000(Lite) DVB-S/S2", @@ -2662,10 +2699,13 @@ static void cx88_card_setup_pre_i2c(struct cx88_core *core) case CX88_BOARD_HAUPPAUGE_HVR3000: case CX88_BOARD_HAUPPAUGE_HVR4000: - case CX88_BOARD_HAUPPAUGE_HVR4000LITE: /* Init GPIO */ cx_write(MO_GP0_IO, core->board.input[0].gpio0); udelay(1000); + cx_clear(MO_GP0_IO, 0x00000080); + udelay(50); + cx_set(MO_GP0_IO, 0x00000080); /* 702 out of reset */ + udelay(1000); break; } } @@ -3004,10 +3044,14 @@ struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr) memcpy(&core->board, &cx88_boards[core->boardnr], sizeof(core->board)); - info_printk(core, "subsystem: %04x:%04x, board: %s [card=%d,%s]\n", + if (!core->board.num_frontends) + core->board.num_frontends=1; + + info_printk(core, "subsystem: %04x:%04x, board: %s [card=%d,%s], frontend(s): %d\n", pci->subsystem_vendor, pci->subsystem_device, core->board.name, core->boardnr, card[core->nr] == core->boardnr ? - "insmod option" : "autodetected"); + "insmod option" : "autodetected", + core->board.num_frontends); if (tuner[core->nr] != UNSET) core->board.tuner_type = tuner[core->nr]; diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c index d656fec59010..60705b08bfe8 100644 --- a/drivers/media/video/cx88/cx88-core.c +++ b/drivers/media/video/cx88/cx88-core.c @@ -549,7 +549,8 @@ void cx88_wakeup(struct cx88_core *core, mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); } if (bc != 1) - printk("%s: %d buffers handled (should be 1)\n",__func__,bc); + dprintk(2, "%s: %d buffers handled (should be 1)\n", + __func__, bc); } void cx88_shutdown(struct cx88_core *core) diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index 344ed2626e59..6968ab0181aa 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -116,13 +116,23 @@ static int cx88_dvb_bus_ctrl(struct dvb_frontend* fe, int acquire) struct cx8802_dev *dev= fe->dvb->priv; struct cx8802_driver *drv = NULL; int ret = 0; + int fe_id; + + fe_id = videobuf_dvb_find_frontend(&dev->frontends, fe); + if (!fe_id) { + printk(KERN_ERR "%s() No frontend found\n", __func__); + return -EINVAL; + } drv = cx8802_get_driver(dev, CX88_MPEG_DVB); if (drv) { - if (acquire) + if (acquire){ + dev->frontends.active_fe_id = fe_id; ret = drv->request_acquire(drv); - else + } else { ret = drv->request_release(drv); + dev->frontends.active_fe_id = 0; + } } return ret; @@ -396,7 +406,7 @@ static int tevii_dvbs_set_voltage(struct dvb_frontend *fe, cx_write(MO_GP0_IO, 0x00006060); break; case SEC_VOLTAGE_OFF: - printk("LNB Voltage SEC_VOLTAGE_off\n"); + printk("LNB Voltage SEC_VOLTAGE_off\n"); break; } @@ -483,6 +493,7 @@ static struct xc5000_config dvico_fusionhdtv7_tuner_config = { static int attach_xc3028(u8 addr, struct cx8802_dev *dev) { struct dvb_frontend *fe; + struct videobuf_dvb_frontend *fe0 = NULL; struct xc2028_ctrl ctl; struct xc2028_config cfg = { .i2c_adap = &dev->core->i2c_adap, @@ -490,7 +501,12 @@ static int attach_xc3028(u8 addr, struct cx8802_dev *dev) .ctrl = &ctl, }; - if (!dev->dvb.frontend) { + /* Get the first frontend */ + fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); + if (!fe0) + return -EINVAL; + + if (!fe0->dvb.frontend) { printk(KERN_ERR "%s/2: dvb frontend not attached. " "Can't attach xc3028\n", dev->core->name); @@ -504,10 +520,13 @@ static int attach_xc3028(u8 addr, struct cx8802_dev *dev) */ cx88_setup_xc3028(dev->core, &ctl); - fe = dvb_attach(xc2028_attach, dev->dvb.frontend, &cfg); + fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg); if (!fe) { printk(KERN_ERR "%s/2: xc3028 attach failed\n", dev->core->name); + dvb_frontend_detach(fe0->dvb.frontend); + dvb_unregister_frontend(fe0->dvb.frontend); + fe0->dvb.frontend = NULL; return -EINVAL; } @@ -532,8 +551,10 @@ static int cx24116_reset_device(struct dvb_frontend *fe) struct cx88_core *core = dev->core; /* Reset the part */ + /* Put the cx24116 into reset */ cx_write(MO_SRST_IO, 0); msleep(10); + /* Take the cx24116 out of reset */ cx_write(MO_SRST_IO, 1); msleep(10); @@ -554,14 +575,14 @@ static struct cx24116_config tevii_s460_config = { static struct stv0299_config tevii_tuner_sharp_config = { .demod_address = 0x68, - .inittab = sharp_z0194a__inittab, + .inittab = sharp_z0194a_inittab, .mclk = 88000000UL, .invert = 1, .skip_reinit = 0, .lock_output = 1, .volt13_op0_op1 = STV0299_VOLT13_OP1, .min_delay_ms = 100, - .set_symbol_rate = sharp_z0194a__set_symbol_rate, + .set_symbol_rate = sharp_z0194a_set_symbol_rate, .set_ts_params = cx24116_set_ts_param, }; @@ -574,19 +595,25 @@ static struct stv0288_config tevii_tuner_earda_config = { static int dvb_register(struct cx8802_dev *dev) { struct cx88_core *core = dev->core; + struct videobuf_dvb_frontend *fe0, *fe1 = NULL; + int mfe_shared = 0; /* bus not shared by default */ - /* init struct videobuf_dvb */ - dev->dvb.name = core->name; - dev->ts_gen_cntrl = 0x0c; + /* Get the first frontend */ + fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); + if (!fe0) + return -EINVAL; - /* init frontend */ + /* multi-frontend gate control is undefined or defaults to fe0 */ + dev->frontends.gate = 0; + + /* init frontend(s) */ switch (core->boardnr) { case CX88_BOARD_HAUPPAUGE_DVB_T1: - dev->dvb.frontend = dvb_attach(cx22702_attach, + fe0->dvb.frontend = dvb_attach(cx22702_attach, &connexant_refboard_config, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61, &core->i2c_adap, DVB_PLL_THOMSON_DTT759X)) goto frontend_detach; @@ -596,11 +623,11 @@ static int dvb_register(struct cx8802_dev *dev) case CX88_BOARD_CONEXANT_DVB_T1: case CX88_BOARD_KWORLD_DVB_T_CX22702: case CX88_BOARD_WINFAST_DTV1000: - dev->dvb.frontend = dvb_attach(cx22702_attach, + fe0->dvb.frontend = dvb_attach(cx22702_attach, &connexant_refboard_config, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60, &core->i2c_adap, DVB_PLL_THOMSON_DTT7579)) goto frontend_detach; @@ -610,33 +637,67 @@ static int dvb_register(struct cx8802_dev *dev) case CX88_BOARD_HAUPPAUGE_HVR1100: case CX88_BOARD_HAUPPAUGE_HVR1100LP: case CX88_BOARD_HAUPPAUGE_HVR1300: - case CX88_BOARD_HAUPPAUGE_HVR3000: - dev->dvb.frontend = dvb_attach(cx22702_attach, + fe0->dvb.frontend = dvb_attach(cx22702_attach, &hauppauge_hvr_config, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &core->i2c_adap, 0x61, TUNER_PHILIPS_FMD1216ME_MK3)) goto frontend_detach; } break; + case CX88_BOARD_HAUPPAUGE_HVR3000: + /* DVB-S init */ + fe0->dvb.frontend = dvb_attach(cx24123_attach, + &hauppauge_novas_config, + &dev->core->i2c_adap); + if (fe0->dvb.frontend) { + if (!dvb_attach(isl6421_attach, fe0->dvb.frontend, + &dev->core->i2c_adap, 0x08, ISL6421_DCL, 0x00)) { + dprintk( 1, "%s(): HVR3000 - DVB-S LNB Init: failed\n", __func__); + } + } else { + dprintk( 1, "%s(): HVR3000 - DVB-S Init: failed\n", __func__); + } + /* DVB-T init */ + fe1 = videobuf_dvb_get_frontend(&dev->frontends, 2); + if (fe1) { + dev->frontends.gate = 2; + mfe_shared = 1; + fe1->dvb.frontend = dvb_attach(cx22702_attach, + &hauppauge_hvr_config, + &dev->core->i2c_adap); + if (fe1->dvb.frontend) { + fe1->dvb.frontend->id = 1; + if(!dvb_attach(simple_tuner_attach, fe1->dvb.frontend, + &dev->core->i2c_adap, 0x61, + TUNER_PHILIPS_FMD1216ME_MK3)) { + dprintk( 1, "%s(): HVR3000 - DVB-T misc Init: failed\n", __func__); + } + } else { + dprintk( 1, "%s(): HVR3000 - DVB-T Init: failed\n", __func__); + } + } else { + dprintk( 1, "%s(): HVR3000 - DVB-T Init: can't find frontend 2.\n", __func__); + } + break; case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS: - dev->dvb.frontend = dvb_attach(mt352_attach, + fe0->dvb.frontend = dvb_attach(mt352_attach, &dvico_fusionhdtv, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60, NULL, DVB_PLL_THOMSON_DTT7579)) goto frontend_detach; break; } /* ZL10353 replaces MT352 on later cards */ - dev->dvb.frontend = dvb_attach(zl10353_attach, + fe0->dvb.frontend = dvb_attach(zl10353_attach, &dvico_fusionhdtv_plus_v1_1, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60, NULL, DVB_PLL_THOMSON_DTT7579)) goto frontend_detach; } @@ -644,31 +705,31 @@ static int dvb_register(struct cx8802_dev *dev) case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL: /* The tin box says DEE1601, but it seems to be DTT7579 * compatible, with a slightly different MT352 AGC gain. */ - dev->dvb.frontend = dvb_attach(mt352_attach, + fe0->dvb.frontend = dvb_attach(mt352_attach, &dvico_fusionhdtv_dual, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61, NULL, DVB_PLL_THOMSON_DTT7579)) goto frontend_detach; break; } /* ZL10353 replaces MT352 on later cards */ - dev->dvb.frontend = dvb_attach(zl10353_attach, + fe0->dvb.frontend = dvb_attach(zl10353_attach, &dvico_fusionhdtv_plus_v1_1, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61, NULL, DVB_PLL_THOMSON_DTT7579)) goto frontend_detach; } break; case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1: - dev->dvb.frontend = dvb_attach(mt352_attach, + fe0->dvb.frontend = dvb_attach(mt352_attach, &dvico_fusionhdtv, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61, NULL, DVB_PLL_LG_Z201)) goto frontend_detach; } @@ -676,11 +737,11 @@ static int dvb_register(struct cx8802_dev *dev) case CX88_BOARD_KWORLD_DVB_T: case CX88_BOARD_DNTV_LIVE_DVB_T: case CX88_BOARD_ADSTECH_DVB_T_PCI: - dev->dvb.frontend = dvb_attach(mt352_attach, + fe0->dvb.frontend = dvb_attach(mt352_attach, &dntv_live_dvbt_config, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61, NULL, DVB_PLL_UNKNOWN_1)) goto frontend_detach; } @@ -688,10 +749,10 @@ static int dvb_register(struct cx8802_dev *dev) case CX88_BOARD_DNTV_LIVE_DVB_T_PRO: #if defined(CONFIG_VIDEO_CX88_VP3054) || (defined(CONFIG_VIDEO_CX88_VP3054_MODULE) && defined(MODULE)) /* MT352 is on a secondary I2C bus made from some GPIO lines */ - dev->dvb.frontend = dvb_attach(mt352_attach, &dntv_live_dvbt_pro_config, + fe0->dvb.frontend = dvb_attach(mt352_attach, &dntv_live_dvbt_pro_config, &dev->vp3054->adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &core->i2c_adap, 0x61, TUNER_PHILIPS_FMD1216ME_MK3)) goto frontend_detach; @@ -702,22 +763,22 @@ static int dvb_register(struct cx8802_dev *dev) #endif break; case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID: - dev->dvb.frontend = dvb_attach(zl10353_attach, + fe0->dvb.frontend = dvb_attach(zl10353_attach, &dvico_fusionhdtv_hybrid, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &core->i2c_adap, 0x61, TUNER_THOMSON_FE6600)) goto frontend_detach; } break; case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: - dev->dvb.frontend = dvb_attach(zl10353_attach, + fe0->dvb.frontend = dvb_attach(zl10353_attach, &dvico_fusionhdtv_xc3028, &core->i2c_adap); - if (dev->dvb.frontend == NULL) - dev->dvb.frontend = dvb_attach(mt352_attach, + if (fe0->dvb.frontend == NULL) + fe0->dvb.frontend = dvb_attach(mt352_attach, &dvico_fusionhdtv_mt352_xc3028, &core->i2c_adap); /* @@ -725,16 +786,16 @@ static int dvb_register(struct cx8802_dev *dev) * We must not permit gate_ctrl to be performed, or * the xc3028 cannot communicate on the bus. */ - if (dev->dvb.frontend) - dev->dvb.frontend->ops.i2c_gate_ctrl = NULL; + if (fe0->dvb.frontend) + fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; if (attach_xc3028(0x61, dev) < 0) return -EINVAL; break; case CX88_BOARD_PCHDTV_HD3000: - dev->dvb.frontend = dvb_attach(or51132_attach, &pchdtv_hd3000, + fe0->dvb.frontend = dvb_attach(or51132_attach, &pchdtv_hd3000, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &core->i2c_adap, 0x61, TUNER_THOMSON_DTT761X)) goto frontend_detach; @@ -751,11 +812,11 @@ static int dvb_register(struct cx8802_dev *dev) /* Select RF connector callback */ fusionhdtv_3_gold.pll_rf_set = lgdt330x_pll_rf_set; - dev->dvb.frontend = dvb_attach(lgdt330x_attach, + fe0->dvb.frontend = dvb_attach(lgdt330x_attach, &fusionhdtv_3_gold, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &core->i2c_adap, 0x61, TUNER_MICROTUNE_4042FI5)) goto frontend_detach; @@ -769,11 +830,11 @@ static int dvb_register(struct cx8802_dev *dev) mdelay(100); cx_set(MO_GP0_IO, 9); mdelay(200); - dev->dvb.frontend = dvb_attach(lgdt330x_attach, + fe0->dvb.frontend = dvb_attach(lgdt330x_attach, &fusionhdtv_3_gold, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &core->i2c_adap, 0x61, TUNER_THOMSON_DTT761X)) goto frontend_detach; @@ -787,15 +848,15 @@ static int dvb_register(struct cx8802_dev *dev) mdelay(100); cx_set(MO_GP0_IO, 1); mdelay(200); - dev->dvb.frontend = dvb_attach(lgdt330x_attach, + fe0->dvb.frontend = dvb_attach(lgdt330x_attach, &fusionhdtv_5_gold, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &core->i2c_adap, 0x61, TUNER_LG_TDVS_H06XF)) goto frontend_detach; - if (!dvb_attach(tda9887_attach, dev->dvb.frontend, + if (!dvb_attach(tda9887_attach, fe0->dvb.frontend, &core->i2c_adap, 0x43)) goto frontend_detach; } @@ -808,25 +869,25 @@ static int dvb_register(struct cx8802_dev *dev) mdelay(100); cx_set(MO_GP0_IO, 1); mdelay(200); - dev->dvb.frontend = dvb_attach(lgdt330x_attach, + fe0->dvb.frontend = dvb_attach(lgdt330x_attach, &pchdtv_hd5500, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &core->i2c_adap, 0x61, TUNER_LG_TDVS_H06XF)) goto frontend_detach; - if (!dvb_attach(tda9887_attach, dev->dvb.frontend, + if (!dvb_attach(tda9887_attach, fe0->dvb.frontend, &core->i2c_adap, 0x43)) goto frontend_detach; } break; case CX88_BOARD_ATI_HDTVWONDER: - dev->dvb.frontend = dvb_attach(nxt200x_attach, + fe0->dvb.frontend = dvb_attach(nxt200x_attach, &ati_hdtvwonder, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &core->i2c_adap, 0x61, TUNER_PHILIPS_TUV1236D)) goto frontend_detach; @@ -834,49 +895,49 @@ static int dvb_register(struct cx8802_dev *dev) break; case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1: case CX88_BOARD_HAUPPAUGE_NOVASE2_S1: - dev->dvb.frontend = dvb_attach(cx24123_attach, + fe0->dvb.frontend = dvb_attach(cx24123_attach, &hauppauge_novas_config, &core->i2c_adap); - if (dev->dvb.frontend) { - if (!dvb_attach(isl6421_attach, dev->dvb.frontend, + if (fe0->dvb.frontend) { + if (!dvb_attach(isl6421_attach, fe0->dvb.frontend, &core->i2c_adap, 0x08, ISL6421_DCL, 0x00)) goto frontend_detach; } break; case CX88_BOARD_KWORLD_DVBS_100: - dev->dvb.frontend = dvb_attach(cx24123_attach, + fe0->dvb.frontend = dvb_attach(cx24123_attach, &kworld_dvbs_100_config, &core->i2c_adap); - if (dev->dvb.frontend) { - core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage; - dev->dvb.frontend->ops.set_voltage = kworld_dvbs_100_set_voltage; + if (fe0->dvb.frontend) { + core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; + fe0->dvb.frontend->ops.set_voltage = kworld_dvbs_100_set_voltage; } break; case CX88_BOARD_GENIATECH_DVBS: - dev->dvb.frontend = dvb_attach(cx24123_attach, + fe0->dvb.frontend = dvb_attach(cx24123_attach, &geniatech_dvbs_config, &core->i2c_adap); - if (dev->dvb.frontend) { - core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage; - dev->dvb.frontend->ops.set_voltage = geniatech_dvbs_set_voltage; + if (fe0->dvb.frontend) { + core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; + fe0->dvb.frontend->ops.set_voltage = geniatech_dvbs_set_voltage; } break; case CX88_BOARD_PINNACLE_PCTV_HD_800i: - dev->dvb.frontend = dvb_attach(s5h1409_attach, + fe0->dvb.frontend = dvb_attach(s5h1409_attach, &pinnacle_pctv_hd_800i_config, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(xc5000_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(xc5000_attach, fe0->dvb.frontend, &core->i2c_adap, &pinnacle_pctv_hd_800i_tuner_config)) goto frontend_detach; } break; case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: - dev->dvb.frontend = dvb_attach(s5h1409_attach, + fe0->dvb.frontend = dvb_attach(s5h1409_attach, &dvico_hdtv5_pci_nano_config, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { + if (fe0->dvb.frontend != NULL) { struct dvb_frontend *fe; struct xc2028_config cfg = { .i2c_adap = &core->i2c_adap, @@ -889,17 +950,17 @@ static int dvb_register(struct cx8802_dev *dev) }; fe = dvb_attach(xc2028_attach, - dev->dvb.frontend, &cfg); + fe0->dvb.frontend, &cfg); if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) fe->ops.tuner_ops.set_config(fe, &ctl); } break; case CX88_BOARD_PINNACLE_HYBRID_PCTV: - dev->dvb.frontend = dvb_attach(zl10353_attach, + fe0->dvb.frontend = dvb_attach(zl10353_attach, &cx88_pinnacle_hybrid_pctv, &core->i2c_adap); - if (dev->dvb.frontend) { - dev->dvb.frontend->ops.i2c_gate_ctrl = NULL; + if (fe0->dvb.frontend) { + fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; if (attach_xc3028(0x61, dev) < 0) goto frontend_detach; } @@ -907,85 +968,118 @@ static int dvb_register(struct cx8802_dev *dev) case CX88_BOARD_GENIATECH_X8000_MT: dev->ts_gen_cntrl = 0x00; - dev->dvb.frontend = dvb_attach(zl10353_attach, + fe0->dvb.frontend = dvb_attach(zl10353_attach, &cx88_geniatech_x8000_mt, &core->i2c_adap); if (attach_xc3028(0x61, dev) < 0) goto frontend_detach; break; case CX88_BOARD_KWORLD_ATSC_120: - dev->dvb.frontend = dvb_attach(s5h1409_attach, + fe0->dvb.frontend = dvb_attach(s5h1409_attach, &kworld_atsc_120_config, &core->i2c_adap); if (attach_xc3028(0x61, dev) < 0) goto frontend_detach; break; case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD: - dev->dvb.frontend = dvb_attach(s5h1411_attach, + fe0->dvb.frontend = dvb_attach(s5h1411_attach, &dvico_fusionhdtv7_config, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(xc5000_attach, dev->dvb.frontend, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(xc5000_attach, fe0->dvb.frontend, &core->i2c_adap, &dvico_fusionhdtv7_tuner_config)) goto frontend_detach; } break; case CX88_BOARD_HAUPPAUGE_HVR4000: + /* DVB-S/S2 Init */ + fe0->dvb.frontend = dvb_attach(cx24116_attach, + &hauppauge_hvr4000_config, + &dev->core->i2c_adap); + if (fe0->dvb.frontend) { + if(!dvb_attach(isl6421_attach, fe0->dvb.frontend, + &dev->core->i2c_adap, 0x08, ISL6421_DCL, 0x00)) { + dprintk( 1, "%s(): HVR4000 - DVB-S LNB Init: failed\n", __func__); + } + } else { + dprintk( 1, "%s(): HVR4000 - DVB-S Init: failed\n", __func__); + } + /* DVB-T Init */ + fe1 = videobuf_dvb_get_frontend(&dev->frontends, 2); + if (fe1) { + dev->frontends.gate = 2; + mfe_shared = 1; + fe1->dvb.frontend = dvb_attach(cx22702_attach, + &hauppauge_hvr_config, + &dev->core->i2c_adap); + if (fe1->dvb.frontend) { + fe1->dvb.frontend->id = 1; + if(!dvb_attach(simple_tuner_attach, fe1->dvb.frontend, + &dev->core->i2c_adap, 0x61, + TUNER_PHILIPS_FMD1216ME_MK3)) { + dprintk( 1, "%s(): HVR4000 - DVB-T misc Init: failed\n", __func__); + } + } else { + dprintk( 1, "%s(): HVR4000 - DVB-T Init: failed\n", __func__); + } + } else { + dprintk( 1, "%s(): HVR4000 - DVB-T Init: can't find frontend 2.\n", __func__); + } + break; case CX88_BOARD_HAUPPAUGE_HVR4000LITE: - /* Support for DVB-S only, not DVB-T support */ - dev->dvb.frontend = dvb_attach(cx24116_attach, + fe0->dvb.frontend = dvb_attach(cx24116_attach, &hauppauge_hvr4000_config, &dev->core->i2c_adap); - if (dev->dvb.frontend) { - dvb_attach(isl6421_attach, dev->dvb.frontend, + if (fe0->dvb.frontend) { + dvb_attach(isl6421_attach, fe0->dvb.frontend, &dev->core->i2c_adap, 0x08, ISL6421_DCL, 0x00); } break; case CX88_BOARD_TEVII_S420: - dev->dvb.frontend = dvb_attach(stv0299_attach, + fe0->dvb.frontend = dvb_attach(stv0299_attach, &tevii_tuner_sharp_config, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x60, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60, &core->i2c_adap, DVB_PLL_OPERA1)) goto frontend_detach; - core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage; - dev->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; + core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; + fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; } else { - dev->dvb.frontend = dvb_attach(stv0288_attach, + fe0->dvb.frontend = dvb_attach(stv0288_attach, &tevii_tuner_earda_config, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - if (!dvb_attach(stb6000_attach, dev->dvb.frontend, 0x61, + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(stb6000_attach, fe0->dvb.frontend, 0x61, &core->i2c_adap)) goto frontend_detach; - core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage; - dev->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; + core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; + fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; } } break; case CX88_BOARD_TEVII_S460: - dev->dvb.frontend = dvb_attach(cx24116_attach, + fe0->dvb.frontend = dvb_attach(cx24116_attach, &tevii_s460_config, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage; - dev->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; + if (fe0->dvb.frontend != NULL) { + core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; + fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; } break; case CX88_BOARD_OMICOM_SS4_PCI: case CX88_BOARD_TBS_8920: case CX88_BOARD_PROF_7300: - dev->dvb.frontend = dvb_attach(cx24116_attach, + fe0->dvb.frontend = dvb_attach(cx24116_attach, &hauppauge_hvr4000_config, &core->i2c_adap); - if (dev->dvb.frontend != NULL) { - core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage; - dev->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; + if (fe0->dvb.frontend != NULL) { + core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; + fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; } break; default: @@ -993,29 +1087,32 @@ static int dvb_register(struct cx8802_dev *dev) core->name); break; } - if (NULL == dev->dvb.frontend) { + + if ( (NULL == fe0->dvb.frontend) || (fe1 && NULL == fe1->dvb.frontend) ) { printk(KERN_ERR "%s/2: frontend initialization failed\n", core->name); return -EINVAL; } /* define general-purpose callback pointer */ - dev->dvb.frontend->callback = cx88_tuner_callback; + fe0->dvb.frontend->callback = cx88_tuner_callback; /* Ensure all frontends negotiate bus access */ - dev->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl; + fe0->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl; + if (fe1) + fe1->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl; /* Put the analog decoder in standby to keep it quiet */ cx88_call_i2c_clients(core, TUNER_SET_STANDBY, NULL); /* register everything */ - return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev, - &dev->pci->dev, adapter_nr); + return videobuf_dvb_register_bus(&dev->frontends, THIS_MODULE, dev, + &dev->pci->dev, adapter_nr, mfe_shared); frontend_detach: - if (dev->dvb.frontend) { - dvb_frontend_detach(dev->dvb.frontend); - dev->dvb.frontend = NULL; + if (fe0->dvb.frontend) { + dvb_frontend_detach(fe0->dvb.frontend); + fe0->dvb.frontend = NULL; } return -EINVAL; } @@ -1039,6 +1136,38 @@ static int cx8802_dvb_advise_acquire(struct cx8802_driver *drv) cx_clear(MO_GP0_IO, 0x00000004); udelay(1000); break; + + case CX88_BOARD_HAUPPAUGE_HVR3000: + case CX88_BOARD_HAUPPAUGE_HVR4000: + if(core->dvbdev->frontends.active_fe_id == 1) { + /* DVB-S/S2 Enabled */ + + /* Toggle reset on cx22702 leaving i2c active */ + cx_write(MO_GP0_IO, (core->board.input[0].gpio0 & 0x0000ff00) | 0x00000080); + udelay(1000); + cx_clear(MO_GP0_IO, 0x00000080); + udelay(50); + cx_set(MO_GP0_IO, 0x00000080); /* cx22702 out of reset */ + cx_set(MO_GP0_IO, 0x00000004); /* tri-state the cx22702 pins */ + udelay(1000); + + cx_write(MO_SRST_IO, 1); /* Take the cx24116/cx24123 out of reset */ + core->dvbdev->ts_gen_cntrl = 0x02; /* Parallel IO */ + } else + if (core->dvbdev->frontends.active_fe_id == 2) { + /* DVB-T Enabled */ + + /* Put the cx24116/cx24123 into reset */ + cx_write(MO_SRST_IO, 0); + + /* cx22702 out of reset and enable it */ + cx_set(MO_GP0_IO, 0x00000080); + cx_clear(MO_GP0_IO, 0x00000004); + core->dvbdev->ts_gen_cntrl = 0x0c; /* Serial IO */ + udelay(1000); + } + break; + default: err = -ENODEV; } @@ -1056,6 +1185,9 @@ static int cx8802_dvb_advise_release(struct cx8802_driver *drv) case CX88_BOARD_HAUPPAUGE_HVR1300: /* Do Nothing, leave the cx22702 on the bus. */ break; + case CX88_BOARD_HAUPPAUGE_HVR3000: + case CX88_BOARD_HAUPPAUGE_HVR4000: + break; default: err = -ENODEV; } @@ -1066,7 +1198,8 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv) { struct cx88_core *core = drv->core; struct cx8802_dev *dev = drv->core->dvbdev; - int err; + int err, i; + struct videobuf_dvb_frontend *fe; dprintk( 1, "%s\n", __func__); dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n", @@ -1086,18 +1219,28 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv) /* dvb stuff */ printk(KERN_INFO "%s/2: cx2388x based DVB/ATSC card\n", core->name); - videobuf_queue_sg_init(&dev->dvb.dvbq, &dvb_qops, + dev->ts_gen_cntrl = 0x0c; + + for (i = 1; i <= core->board.num_frontends; i++) { + fe = videobuf_dvb_get_frontend(&core->dvbdev->frontends, i); + if (!fe) { + printk(KERN_ERR "%s() failed to get frontend(%d)\n", __func__, i); + continue; + } + videobuf_queue_sg_init(&fe->dvb.dvbq, &dvb_qops, &dev->pci->dev, &dev->slock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP, sizeof(struct cx88_buffer), dev); + /* init struct videobuf_dvb */ + fe->dvb.name = dev->core->name; + } err = dvb_register(dev); if (err != 0) printk(KERN_ERR "%s/2: dvb_register failed (err = %d)\n", core->name, err); - - fail_core: +fail_core: return err; } @@ -1105,9 +1248,7 @@ static int cx8802_dvb_remove(struct cx8802_driver *drv) { struct cx8802_dev *dev = drv->core->dvbdev; - /* dvb */ - if (dev->dvb.frontend) - videobuf_dvb_unregister(&dev->dvb); + videobuf_dvb_unregister_bus(&dev->frontends); vp3054_i2c_remove(dev); diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/video/cx88/cx88-i2c.c index 8e74d64fdcd2..01de23007095 100644 --- a/drivers/media/video/cx88/cx88-i2c.c +++ b/drivers/media/video/cx88/cx88-i2c.c @@ -116,18 +116,25 @@ static int detach_inform(struct i2c_client *client) void cx88_call_i2c_clients(struct cx88_core *core, unsigned int cmd, void *arg) { + struct videobuf_dvb_frontends *f = &core->dvbdev->frontends; + struct videobuf_dvb_frontend *fe = NULL; if (0 != core->i2c_rc) return; #if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE) - if ( (core->dvbdev) && (core->dvbdev->dvb.frontend) ) { - if (core->dvbdev->dvb.frontend->ops.i2c_gate_ctrl) - core->dvbdev->dvb.frontend->ops.i2c_gate_ctrl(core->dvbdev->dvb.frontend, 1); + if (core->dvbdev && f) { + if(f->gate <= 1) /* undefined or fe0 */ + fe = videobuf_dvb_get_frontend(f, 1); + else + fe = videobuf_dvb_get_frontend(f, f->gate); + + if (fe && fe->dvb.frontend && fe->dvb.frontend->ops.i2c_gate_ctrl) + fe->dvb.frontend->ops.i2c_gate_ctrl(fe->dvb.frontend, 1); i2c_clients_command(&core->i2c_adap, cmd, arg); - if (core->dvbdev->dvb.frontend->ops.i2c_gate_ctrl) - core->dvbdev->dvb.frontend->ops.i2c_gate_ctrl(core->dvbdev->dvb.frontend, 0); + if (fe && fe->dvb.frontend && fe->dvb.frontend->ops.i2c_gate_ctrl) + fe->dvb.frontend->ops.i2c_gate_ctrl(fe->dvb.frontend, 0); } else #endif i2c_clients_command(&core->i2c_adap, cmd, arg); diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c index a6b061c2644a..6df5cf314186 100644 --- a/drivers/media/video/cx88/cx88-mpeg.c +++ b/drivers/media/video/cx88/cx88-mpeg.c @@ -768,7 +768,8 @@ static int __devinit cx8802_probe(struct pci_dev *pci_dev, { struct cx8802_dev *dev; struct cx88_core *core; - int err; + struct videobuf_dvb_frontend *demod; + int err,i; /* general setup */ core = cx88_core_get(pci_dev); @@ -781,6 +782,11 @@ static int __devinit cx8802_probe(struct pci_dev *pci_dev, if (!core->board.mpeg) goto fail_core; + if (!core->board.num_frontends) { + printk(KERN_ERR "%s() .num_frontends should be non-zero, err = %d\n", __func__, err); + goto fail_core; + } + err = -ENOMEM; dev = kzalloc(sizeof(*dev),GFP_KERNEL); if (NULL == dev) @@ -795,6 +801,20 @@ static int __devinit cx8802_probe(struct pci_dev *pci_dev, INIT_LIST_HEAD(&dev->drvlist); list_add_tail(&dev->devlist,&cx8802_devlist); + mutex_init(&dev->frontends.lock); + INIT_LIST_HEAD(&dev->frontends.felist); + + printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, core->board.num_frontends); + + for (i = 1; i <= core->board.num_frontends; i++) { + demod = videobuf_dvb_alloc_frontend(&dev->frontends, i); + if(demod == NULL) { + printk(KERN_ERR "%s() failed to alloc\n", __func__); + err = -ENOMEM; + goto fail_free; + } + } + /* Maintain a reference so cx88-video can query the 8802 device. */ core->dvbdev = dev; diff --git a/drivers/media/video/cx88/cx88-tvaudio.c b/drivers/media/video/cx88/cx88-tvaudio.c index 3a1977f41e27..7dd506b987fe 100644 --- a/drivers/media/video/cx88/cx88-tvaudio.c +++ b/drivers/media/video/cx88/cx88-tvaudio.c @@ -767,6 +767,14 @@ void cx88_set_tvaudio(struct cx88_core *core) case WW_FM: set_audio_standard_FM(core, radio_deemphasis); break; + case WW_I2SADC: + set_audio_start(core, 0x01); + /* Slave/Philips/Autobaud */ + cx_write(AUD_I2SINPUTCNTL, 0); + /* Switch to "I2S ADC mode" */ + cx_write(AUD_I2SCNTL, 0x1); + set_audio_finish(core, EN_I2SIN_ENABLE); + break; case WW_NONE: default: printk("%s/0: unknown tv audio mode [%d]\n", @@ -895,6 +903,9 @@ void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual) break; } break; + case WW_I2SADC: + /* DO NOTHING */ + break; } if (UNSET != ctl) { diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index be45955dff68..3904b73f52ee 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -426,24 +426,7 @@ int cx88_video_mux(struct cx88_core *core, unsigned int input) /* if there are audioroutes defined, we have an external ADC to deal with audio */ - if (INPUT(input).audioroute) { - - /* cx2388's C-ADC is connected to the tuner only. - When used with S-Video, that ADC is busy dealing with - chroma, so an external must be used for baseband audio */ - - if (INPUT(input).type != CX88_VMUX_TELEVISION && - INPUT(input).type != CX88_RADIO) { - /* "ADC mode" */ - cx_write(AUD_I2SCNTL, 0x1); - cx_set(AUD_CTL, EN_I2SIN_ENABLE); - } else { - /* Normal mode */ - cx_write(AUD_I2SCNTL, 0x0); - cx_clear(AUD_CTL, EN_I2SIN_ENABLE); - } - /* The wm8775 module has the "2" route hardwired into the initialization. Some boards may use different routes for different inputs. HVR-1300 surely does */ @@ -454,9 +437,19 @@ int cx88_video_mux(struct cx88_core *core, unsigned int input) route.input = INPUT(input).audioroute; cx88_call_i2c_clients(core, VIDIOC_INT_S_AUDIO_ROUTING, &route); - } - + /* cx2388's C-ADC is connected to the tuner only. + When used with S-Video, that ADC is busy dealing with + chroma, so an external must be used for baseband audio */ + if (INPUT(input).type != CX88_VMUX_TELEVISION ) { + /* "I2S ADC mode" */ + core->tvaudio = WW_I2SADC; + cx88_set_tvaudio(core); + } else { + /* Normal mode */ + cx_write(AUD_I2SCNTL, 0x0); + cx_clear(AUD_CTL, EN_I2SIN_ENABLE); + } } return 0; @@ -832,9 +825,24 @@ static int video_open(struct inode *inode, struct file *file) cx_write(MO_GP0_IO, core->board.radio.gpio0); cx_write(MO_GP1_IO, core->board.radio.gpio1); cx_write(MO_GP2_IO, core->board.radio.gpio2); - core->tvaudio = WW_FM; - cx88_set_tvaudio(core); - cx88_set_stereo(core,V4L2_TUNER_MODE_STEREO,1); + if (core->board.radio.audioroute) { + if(core->board.audio_chip && + core->board.audio_chip == V4L2_IDENT_WM8775) { + struct v4l2_routing route; + + route.input = core->board.radio.audioroute; + cx88_call_i2c_clients(core, + VIDIOC_INT_S_AUDIO_ROUTING, &route); + } + /* "I2S ADC mode" */ + core->tvaudio = WW_I2SADC; + cx88_set_tvaudio(core); + } else { + /* FM Mode */ + core->tvaudio = WW_FM; + cx88_set_tvaudio(core); + cx88_set_stereo(core,V4L2_TUNER_MODE_STEREO,1); + } cx88_call_i2c_clients(core,AUDC_SET_RADIO,NULL); } unlock_kernel(); diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index dbf01b8b57a5..76207c2856b7 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -247,7 +247,7 @@ struct cx88_input { enum cx88_itype type; u32 gpio0, gpio1, gpio2, gpio3; unsigned int vmux:2; - unsigned int audioroute:2; + unsigned int audioroute:4; }; struct cx88_board { @@ -261,6 +261,7 @@ struct cx88_board { struct cx88_input radio; enum cx88_board_type mpeg; unsigned int audio_chip; + int num_frontends; }; struct cx88_subid { @@ -356,6 +357,7 @@ struct cx88_core { struct cx8802_dev *dvbdev; enum cx88_board_type active_type_id; int active_ref; + int active_fe_id; }; struct cx8800_dev; @@ -490,7 +492,7 @@ struct cx8802_dev { #if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE) /* for dvb only */ - struct videobuf_dvb dvb; + struct videobuf_dvb_frontends frontends; #endif #if defined(CONFIG_VIDEO_CX88_VP3054) || \ @@ -628,6 +630,7 @@ extern void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl); #define WW_EIAJ 7 #define WW_I2SPT 8 #define WW_FM 9 +#define WW_I2SADC 10 void cx88_set_tvaudio(struct cx88_core *core); void cx88_newstation(struct cx88_core *core); diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index c21af312ee7c..e48fbfc8ad05 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -21,6 +21,7 @@ #define MODULE_NAME "gspca" #include <linux/init.h> +#include <linux/version.h> #include <linux/fs.h> #include <linux/vmalloc.h> #include <linux/sched.h> @@ -403,7 +404,7 @@ static void destroy_urbs(struct gspca_dev *gspca_dev) unsigned int i; PDEBUG(D_STREAM, "kill transfer"); - for (i = 0; i < MAX_NURBS; ++i) { + for (i = 0; i < MAX_NURBS; i++) { urb = gspca_dev->urb[i]; if (urb == NULL) break; diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index 4779dd0b06da..1d9dc90b4791 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -2,7 +2,6 @@ #define GSPCAV2_H #include <linux/module.h> -#include <linux/version.h> #include <linux/kernel.h> #include <linux/usb.h> #include <linux/videodev2.h> diff --git a/drivers/media/video/gspca/m5602/m5602_bridge.h b/drivers/media/video/gspca/m5602/m5602_bridge.h index c786d7d3d44a..1a37ae4bc82d 100644 --- a/drivers/media/video/gspca/m5602/m5602_bridge.h +++ b/drivers/media/video/gspca/m5602/m5602_bridge.h @@ -1,7 +1,7 @@ /* * USB Driver for ALi m5602 based webcams * - * Copyright (C) 2008 Erik Andren + * Copyright (C) 2008 Erik Andrén * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> * @@ -25,33 +25,6 @@ /*****************************************************************************/ -#undef PDEBUG -#undef info -#undef err - -#define err(format, arg...) printk(KERN_ERR KBUILD_MODNAME ": " \ - format "\n" , ## arg) -#define info(format, arg...) printk(KERN_INFO KBUILD_MODNAME ": " \ - format "\n" , ## arg) - -/* Debug parameters */ -#define DBG_INIT 0x1 -#define DBG_PROBE 0x2 -#define DBG_V4L2 0x4 -#define DBG_TRACE 0x8 -#define DBG_DATA 0x10 -#define DBG_V4L2_CID 0x20 -#define DBG_GSPCA 0x40 - -#define PDEBUG(level, fmt, args...) \ - do { \ - if (m5602_debug & level) \ - info("[%s:%d] " fmt, __func__, __LINE__ , \ - ## args); \ - } while (0) - -/*****************************************************************************/ - #define M5602_XB_SENSOR_TYPE 0x00 #define M5602_XB_SENSOR_CTRL 0x01 #define M5602_XB_LINE_OF_FRAME_H 0x02 diff --git a/drivers/media/video/gspca/m5602/m5602_core.c b/drivers/media/video/gspca/m5602/m5602_core.c index 19d5e351ccc1..fd6ce384b487 100644 --- a/drivers/media/video/gspca/m5602/m5602_core.c +++ b/drivers/media/video/gspca/m5602/m5602_core.c @@ -1,7 +1,7 @@ -/* + /* * USB Driver for ALi m5602 based webcams * - * Copyright (C) 2008 Erik Andren + * Copyright (C) 2008 Erik Andrén * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> * @@ -26,7 +26,6 @@ int force_sensor; int dump_bridge; int dump_sensor; -unsigned int m5602_debug; static const __devinitdata struct usb_device_id m5602_table[] = { {USB_DEVICE(0x0402, 0x5602)}, @@ -48,7 +47,7 @@ int m5602_read_bridge(struct sd *sd, u8 address, u8 *i2c_data) 1, M5602_URB_MSG_TIMEOUT); *i2c_data = buf[0]; - PDEBUG(DBG_TRACE, "Reading bridge register 0x%x containing 0x%x", + PDEBUG(D_CONF, "Reading bridge register 0x%x containing 0x%x", address, *i2c_data); /* usb_control_msg(...) returns the number of bytes sent upon success, @@ -63,7 +62,7 @@ int m5602_write_bridge(struct sd *sd, u8 address, u8 i2c_data) struct usb_device *udev = sd->gspca_dev.dev; __u8 *buf = sd->gspca_dev.usb_buf; - PDEBUG(DBG_TRACE, "Writing bridge register 0x%x with 0x%x", + PDEBUG(D_CONF, "Writing bridge register 0x%x with 0x%x", address, i2c_data); memcpy(buf, bridge_urb_skeleton, @@ -91,7 +90,8 @@ static void m5602_dump_bridge(struct sd *sd) m5602_read_bridge(sd, i, &val); info("ALi m5602 address 0x%x contains 0x%x", i, val); } - info("Warning: The camera probably won't work until it's power cycled"); + info("Warning: The ALi m5602 webcam probably won't work " + "until it's power cycled"); } static int m5602_probe_sensor(struct sd *sd) @@ -135,7 +135,7 @@ static int m5602_init(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; int err; - PDEBUG(DBG_TRACE, "Initializing ALi m5602 webcam"); + PDEBUG(D_CONF, "Initializing ALi m5602 webcam"); /* Run the init sequence */ err = sd->sensor->init(sd); @@ -146,16 +146,18 @@ static int m5602_start_transfer(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; __u8 *buf = sd->gspca_dev.usb_buf; + int err; /* Send start command to the camera */ const u8 buffer[4] = {0x13, 0xf9, 0x0f, 0x01}; memcpy(buf, buffer, sizeof(buffer)); - usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), - 0x04, 0x40, 0x19, 0x0000, buf, - 4, M5602_URB_MSG_TIMEOUT); + err = usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + 0x04, 0x40, 0x19, 0x0000, buf, + 4, M5602_URB_MSG_TIMEOUT); - PDEBUG(DBG_V4L2, "Transfer started"); - return 0; + PDEBUG(D_STREAM, "Transfer started"); + return (err < 0) ? err : 0; } static void m5602_urb_complete(struct gspca_dev *gspca_dev, @@ -165,14 +167,14 @@ static void m5602_urb_complete(struct gspca_dev *gspca_dev, struct sd *sd = (struct sd *) gspca_dev; if (len < 6) { - PDEBUG(DBG_DATA, "Packet is less than 6 bytes"); + PDEBUG(D_PACK, "Packet is less than 6 bytes"); return; } /* Frame delimiter: ff xx xx xx ff ff */ if (data[0] == 0xff && data[4] == 0xff && data[5] == 0xff && data[2] != sd->frame_id) { - PDEBUG(DBG_DATA, "Frame delimiter detected"); + PDEBUG(D_FRAM, "Frame delimiter detected"); sd->frame_id = data[2]; /* Remove the extra fluff appended on each header */ @@ -187,7 +189,7 @@ static void m5602_urb_complete(struct gspca_dev *gspca_dev, /* Create a new frame */ gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, len); - PDEBUG(DBG_V4L2, "Starting new frame %d", + PDEBUG(D_FRAM, "Starting new frame %d", sd->frame_count); } else { @@ -198,7 +200,7 @@ static void m5602_urb_complete(struct gspca_dev *gspca_dev, len -= 4; if (cur_frame_len + len <= frame->v4l2_buf.length) { - PDEBUG(DBG_DATA, "Continuing frame %d copying %d bytes", + PDEBUG(D_FRAM, "Continuing frame %d copying %d bytes", sd->frame_count, len); gspca_frame_add(gspca_dev, INTER_PACKET, frame, @@ -234,8 +236,6 @@ static int m5602_configure(struct gspca_dev *gspca_dev, struct cam *cam; int err; - PDEBUG(DBG_GSPCA, "m5602_configure start"); - cam = &gspca_dev->cam; cam->epaddr = M5602_ISOC_ENDPOINT_ADDR; sd->desc = &sd_desc; @@ -248,11 +248,10 @@ static int m5602_configure(struct gspca_dev *gspca_dev, if (err) goto fail; - PDEBUG(DBG_GSPCA, "m5602_configure end"); return 0; fail: - PDEBUG(DBG_GSPCA, "m5602_configure failed"); + PDEBUG(D_ERR, "ALi m5602 webcam failed"); cam->cam_mode = NULL; cam->nmodes = 0; @@ -282,13 +281,13 @@ static int __init mod_m5602_init(void) { if (usb_register(&sd_driver) < 0) return -1; - PDEBUG(D_PROBE, "m5602 module registered"); + PDEBUG(D_PROBE, "registered"); return 0; } static void __exit mod_m5602_exit(void) { usb_deregister(&sd_driver); - PDEBUG(D_PROBE, "m5602 module deregistered"); + PDEBUG(D_PROBE, "deregistered"); } module_init(mod_m5602_init); @@ -297,9 +296,6 @@ module_exit(mod_m5602_exit); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); -module_param_named(debug, m5602_debug, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "toggles debug on/off"); - module_param(force_sensor, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(force_sensor, "force detection of sensor, " diff --git a/drivers/media/video/gspca/m5602/m5602_mt9m111.c b/drivers/media/video/gspca/m5602/m5602_mt9m111.c index 566d4925a0e8..fb700c2d055a 100644 --- a/drivers/media/video/gspca/m5602/m5602_mt9m111.c +++ b/drivers/media/video/gspca/m5602/m5602_mt9m111.c @@ -1,7 +1,7 @@ /* * Driver for the mt9m111 sensor * - * Copyright (C) 2008 Erik Andren + * Copyright (C) 2008 Erik Andrén * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> * @@ -107,7 +107,7 @@ int mt9m111_get_vflip(struct gspca_dev *gspca_dev, __s32 *val) err = mt9m111_read_sensor(sd, MT9M111_SC_R_MODE_CONTEXT_B, data, 2); *val = data[0] & MT9M111_RMB_MIRROR_ROWS; - PDEBUG(DBG_V4L2_CID, "Read vertical flip %d", *val); + PDEBUG(D_V4L2, "Read vertical flip %d", *val); return (err < 0) ? err : 0; } @@ -118,7 +118,7 @@ int mt9m111_set_vflip(struct gspca_dev *gspca_dev, __s32 val) u8 data[2] = {0x00, 0x00}; struct sd *sd = (struct sd *) gspca_dev; - PDEBUG(DBG_V4L2_CID, "Set vertical flip to %d", val); + PDEBUG(D_V4L2, "Set vertical flip to %d", val); /* Set the correct page map */ err = mt9m111_write_sensor(sd, MT9M111_PAGE_MAP, data, 2); @@ -145,7 +145,7 @@ int mt9m111_get_hflip(struct gspca_dev *gspca_dev, __s32 *val) err = mt9m111_read_sensor(sd, MT9M111_SC_R_MODE_CONTEXT_B, data, 2); *val = data[0] & MT9M111_RMB_MIRROR_COLS; - PDEBUG(DBG_V4L2_CID, "Read horizontal flip %d", *val); + PDEBUG(D_V4L2, "Read horizontal flip %d", *val); return (err < 0) ? err : 0; } @@ -156,7 +156,7 @@ int mt9m111_set_hflip(struct gspca_dev *gspca_dev, __s32 val) u8 data[2] = {0x00, 0x00}; struct sd *sd = (struct sd *) gspca_dev; - PDEBUG(DBG_V4L2_CID, "Set horizontal flip to %d", val); + PDEBUG(D_V4L2, "Set horizontal flip to %d", val); /* Set the correct page map */ err = mt9m111_write_sensor(sd, MT9M111_PAGE_MAP, data, 2); @@ -188,7 +188,7 @@ int mt9m111_get_gain(struct gspca_dev *gspca_dev, __s32 *val) ((tmp & (1 << 8)) * 2) | (tmp & 0x7f); - PDEBUG(DBG_V4L2_CID, "Read gain %d", *val); + PDEBUG(D_V4L2, "Read gain %d", *val); return (err < 0) ? err : 0; } @@ -222,7 +222,7 @@ int mt9m111_set_gain(struct gspca_dev *gspca_dev, __s32 val) data[1] = (tmp & 0xff00) >> 8; data[0] = (tmp & 0xff); - PDEBUG(DBG_V4L2_CID, "tmp=%d, data[1]=%d, data[0]=%d", tmp, + PDEBUG(D_V4L2, "tmp=%d, data[1]=%d, data[0]=%d", tmp, data[1], data[0]); err = mt9m111_write_sensor(sd, MT9M111_SC_GLOBAL_GAIN, @@ -257,7 +257,7 @@ int mt9m111_read_sensor(struct sd *sd, const u8 address, for (i = 0; i < len && !err; i++) { err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i])); - PDEBUG(DBG_TRACE, "Reading sensor register " + PDEBUG(D_CONF, "Reading sensor register " "0x%x contains 0x%x ", address, *i2c_data); } out: @@ -290,7 +290,7 @@ int mt9m111_write_sensor(struct sd *sd, const u8 address, memcpy(p, sensor_urb_skeleton + 16, 4); p[3] = i2c_data[i]; p += 4; - PDEBUG(DBG_TRACE, "Writing sensor register 0x%x with 0x%x", + PDEBUG(D_CONF, "Writing sensor register 0x%x with 0x%x", address, i2c_data[i]); } diff --git a/drivers/media/video/gspca/m5602/m5602_mt9m111.h b/drivers/media/video/gspca/m5602/m5602_mt9m111.h index 79a5d8878190..315209d5aeef 100644 --- a/drivers/media/video/gspca/m5602/m5602_mt9m111.h +++ b/drivers/media/video/gspca/m5602/m5602_mt9m111.h @@ -1,7 +1,7 @@ /* * Driver for the mt9m111 sensor * - * Copyright (C) 2008 Erik Andren + * Copyright (C) 2008 Erik Andrén * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> * @@ -82,7 +82,6 @@ /* Kernel module parameters */ extern int force_sensor; extern int dump_sensor; -extern unsigned int m5602_debug; int mt9m111_probe(struct sd *sd); int mt9m111_init(struct sd *sd); @@ -152,8 +151,8 @@ static struct m5602_sensor mt9m111 = { .default_value = DEFAULT_GAIN, .flags = V4L2_CTRL_FLAG_SLIDER }, - .set = mt9m111_set_hflip, - .get = mt9m111_get_hflip + .set = mt9m111_set_gain, + .get = mt9m111_get_gain } }, diff --git a/drivers/media/video/gspca/m5602/m5602_ov9650.c b/drivers/media/video/gspca/m5602/m5602_ov9650.c index 31c5896250e7..837c7e47661c 100644 --- a/drivers/media/video/gspca/m5602/m5602_ov9650.c +++ b/drivers/media/video/gspca/m5602/m5602_ov9650.c @@ -1,7 +1,7 @@ /* * Driver for the ov9650 sensor * - * Copyright (C) 2008 Erik Andren + * Copyright (C) 2008 Erik Andrén * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> * @@ -40,7 +40,7 @@ int ov9650_read_sensor(struct sd *sd, const u8 address, for (i = 0; i < len; i++) { err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i])); - PDEBUG(DBG_TRACE, "Reading sensor register " + PDEBUG(D_CONF, "Reading sensor register " "0x%x containing 0x%x ", address, *i2c_data); } return (err < 0) ? err : 0; @@ -72,7 +72,7 @@ int ov9650_write_sensor(struct sd *sd, const u8 address, memcpy(p, sensor_urb_skeleton + 16, 4); p[3] = i2c_data[i]; p += 4; - PDEBUG(DBG_TRACE, "Writing sensor register 0x%x with 0x%x", + PDEBUG(D_CONF, "Writing sensor register 0x%x with 0x%x", address, i2c_data[i]); } @@ -199,7 +199,7 @@ int ov9650_get_exposure(struct gspca_dev *gspca_dev, __s32 *val) goto out; *val |= (i2c_data & 0x3f) << 10; - PDEBUG(DBG_V4L2_CID, "Read exposure %d", *val); + PDEBUG(D_V4L2, "Read exposure %d", *val); out: return (err < 0) ? err : 0; } @@ -210,7 +210,7 @@ int ov9650_set_exposure(struct gspca_dev *gspca_dev, __s32 val) u8 i2c_data; int err; - PDEBUG(DBG_V4L2_CID, "Set exposure to %d", + PDEBUG(D_V4L2, "Set exposure to %d", val & 0xffff); /* The 6 MSBs */ @@ -246,7 +246,7 @@ int ov9650_get_gain(struct gspca_dev *gspca_dev, __s32 *val) err = ov9650_read_sensor(sd, OV9650_GAIN, &i2c_data, 1); *val |= i2c_data; - PDEBUG(DBG_V4L2_CID, "Read gain %d", *val); + PDEBUG(D_V4L2, "Read gain %d", *val); return (err < 0) ? err : 0; } @@ -280,7 +280,7 @@ int ov9650_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val) err = ov9650_read_sensor(sd, OV9650_RED, &i2c_data, 1); *val = i2c_data; - PDEBUG(DBG_V4L2_CID, "Read red gain %d", *val); + PDEBUG(D_V4L2, "Read red gain %d", *val); return (err < 0) ? err : 0; } @@ -291,7 +291,7 @@ int ov9650_set_red_balance(struct gspca_dev *gspca_dev, __s32 val) u8 i2c_data; struct sd *sd = (struct sd *) gspca_dev; - PDEBUG(DBG_V4L2_CID, "Set red gain to %d", + PDEBUG(D_V4L2, "Set red gain to %d", val & 0xff); i2c_data = val & 0xff; @@ -309,7 +309,7 @@ int ov9650_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val) err = ov9650_read_sensor(sd, OV9650_BLUE, &i2c_data, 1); *val = i2c_data; - PDEBUG(DBG_V4L2_CID, "Read blue gain %d", *val); + PDEBUG(D_V4L2, "Read blue gain %d", *val); return (err < 0) ? err : 0; } @@ -320,7 +320,7 @@ int ov9650_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val) u8 i2c_data; struct sd *sd = (struct sd *) gspca_dev; - PDEBUG(DBG_V4L2_CID, "Set blue gain to %d", + PDEBUG(D_V4L2, "Set blue gain to %d", val & 0xff); i2c_data = val & 0xff; @@ -340,7 +340,7 @@ int ov9650_get_hflip(struct gspca_dev *gspca_dev, __s32 *val) *val = ((i2c_data & OV9650_HFLIP) >> 5) ? 0 : 1; else *val = (i2c_data & OV9650_HFLIP) >> 5; - PDEBUG(DBG_V4L2_CID, "Read horizontal flip %d", *val); + PDEBUG(D_V4L2, "Read horizontal flip %d", *val); return (err < 0) ? err : 0; } @@ -351,7 +351,7 @@ int ov9650_set_hflip(struct gspca_dev *gspca_dev, __s32 val) u8 i2c_data; struct sd *sd = (struct sd *) gspca_dev; - PDEBUG(DBG_V4L2_CID, "Set horizontal flip to %d", val); + PDEBUG(D_V4L2, "Set horizontal flip to %d", val); err = ov9650_read_sensor(sd, OV9650_MVFP, &i2c_data, 1); if (err < 0) goto out; @@ -379,7 +379,7 @@ int ov9650_get_vflip(struct gspca_dev *gspca_dev, __s32 *val) *val = ((i2c_data & 0x10) >> 4) ? 0 : 1; else *val = (i2c_data & 0x10) >> 4; - PDEBUG(DBG_V4L2_CID, "Read vertical flip %d", *val); + PDEBUG(D_V4L2, "Read vertical flip %d", *val); return (err < 0) ? err : 0; } @@ -390,7 +390,7 @@ int ov9650_set_vflip(struct gspca_dev *gspca_dev, __s32 val) u8 i2c_data; struct sd *sd = (struct sd *) gspca_dev; - PDEBUG(DBG_V4L2_CID, "Set vertical flip to %d", val); + PDEBUG(D_V4L2, "Set vertical flip to %d", val); err = ov9650_read_sensor(sd, OV9650_MVFP, &i2c_data, 1); if (err < 0) goto out; @@ -420,7 +420,7 @@ int ov9650_get_brightness(struct gspca_dev *gspca_dev, __s32 *val) err = ov9650_read_sensor(sd, OV9650_GAIN, &i2c_data, 1); *val |= i2c_data; - PDEBUG(DBG_V4L2_CID, "Read gain %d", *val); + PDEBUG(D_V4L2, "Read gain %d", *val); out: return (err < 0) ? err : 0; } @@ -431,7 +431,7 @@ int ov9650_set_brightness(struct gspca_dev *gspca_dev, __s32 val) u8 i2c_data; struct sd *sd = (struct sd *) gspca_dev; - PDEBUG(DBG_V4L2_CID, "Set gain to %d", val & 0x3ff); + PDEBUG(D_V4L2, "Set gain to %d", val & 0x3ff); /* Read the OV9650_VREF register first to avoid corrupting the VREF high and low bits */ @@ -461,7 +461,7 @@ int ov9650_get_auto_white_balance(struct gspca_dev *gspca_dev, __s32 *val) err = ov9650_read_sensor(sd, OV9650_COM8, &i2c_data, 1); *val = (i2c_data & OV9650_AWB_EN) >> 1; - PDEBUG(DBG_V4L2_CID, "Read auto white balance %d", *val); + PDEBUG(D_V4L2, "Read auto white balance %d", *val); return (err < 0) ? err : 0; } @@ -472,7 +472,7 @@ int ov9650_set_auto_white_balance(struct gspca_dev *gspca_dev, __s32 val) u8 i2c_data; struct sd *sd = (struct sd *) gspca_dev; - PDEBUG(DBG_V4L2_CID, "Set auto white balance to %d", val); + PDEBUG(D_V4L2, "Set auto white balance to %d", val); err = ov9650_read_sensor(sd, OV9650_COM8, &i2c_data, 1); if (err < 0) goto out; @@ -491,7 +491,7 @@ int ov9650_get_auto_gain(struct gspca_dev *gspca_dev, __s32 *val) err = ov9650_read_sensor(sd, OV9650_COM8, &i2c_data, 1); *val = (i2c_data & OV9650_AGC_EN) >> 2; - PDEBUG(DBG_V4L2_CID, "Read auto gain control %d", *val); + PDEBUG(D_V4L2, "Read auto gain control %d", *val); return (err < 0) ? err : 0; } @@ -502,7 +502,7 @@ int ov9650_set_auto_gain(struct gspca_dev *gspca_dev, __s32 val) u8 i2c_data; struct sd *sd = (struct sd *) gspca_dev; - PDEBUG(DBG_V4L2_CID, "Set auto gain control to %d", val); + PDEBUG(D_V4L2, "Set auto gain control to %d", val); err = ov9650_read_sensor(sd, OV9650_COM8, &i2c_data, 1); if (err < 0) goto out; diff --git a/drivers/media/video/gspca/m5602/m5602_ov9650.h b/drivers/media/video/gspca/m5602/m5602_ov9650.h index 2f29cb056f30..065632f0378e 100644 --- a/drivers/media/video/gspca/m5602/m5602_ov9650.h +++ b/drivers/media/video/gspca/m5602/m5602_ov9650.h @@ -1,7 +1,7 @@ /* * Driver for the ov9650 sensor * - * Copyright (C) 2008 Erik Andren + * Copyright (C) 2008 Erik Andrén * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> * @@ -121,7 +121,6 @@ /* Kernel module parameters */ extern int force_sensor; extern int dump_sensor; -extern unsigned int m5602_debug; int ov9650_probe(struct sd *sd); int ov9650_init(struct sd *sd); diff --git a/drivers/media/video/gspca/m5602/m5602_po1030.c b/drivers/media/video/gspca/m5602/m5602_po1030.c index 08c015bde115..d17ac52566e6 100644 --- a/drivers/media/video/gspca/m5602/m5602_po1030.c +++ b/drivers/media/video/gspca/m5602/m5602_po1030.c @@ -1,7 +1,7 @@ /* * Driver for the po1030 sensor * - * Copyright (c) 2008 Erik Andren + * Copyright (c) 2008 Erik Andrén * Copyright (c) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. * Copyright (c) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> * @@ -82,7 +82,7 @@ int po1030_read_sensor(struct sd *sd, const u8 address, for (i = 0; i < len; i++) { err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i])); - PDEBUG(DBG_TRACE, "Reading sensor register " + PDEBUG(D_CONF, "Reading sensor register " "0x%x containing 0x%x ", address, *i2c_data); } return (err < 0) ? err : 0; @@ -112,7 +112,7 @@ int po1030_write_sensor(struct sd *sd, const u8 address, memcpy(p, sensor_urb_skeleton + 16, 4); p[3] = i2c_data[i]; p += 4; - PDEBUG(DBG_TRACE, "Writing sensor register 0x%x with 0x%x", + PDEBUG(D_CONF, "Writing sensor register 0x%x with 0x%x", address, i2c_data[i]); } @@ -185,7 +185,7 @@ int po1030_get_exposure(struct gspca_dev *gspca_dev, __s32 *val) &i2c_data, 1); *val |= i2c_data; - PDEBUG(DBG_V4L2_CID, "Exposure read as %d", *val); + PDEBUG(D_V4L2, "Exposure read as %d", *val); out: return (err < 0) ? err : 0; } @@ -196,10 +196,10 @@ int po1030_set_exposure(struct gspca_dev *gspca_dev, __s32 val) u8 i2c_data; int err; - PDEBUG(DBG_V4L2, "Set exposure to %d", val & 0xffff); + PDEBUG(D_V4L2, "Set exposure to %d", val & 0xffff); i2c_data = ((val & 0xff00) >> 8); - PDEBUG(DBG_V4L2, "Set exposure to high byte to 0x%x", + PDEBUG(D_V4L2, "Set exposure to high byte to 0x%x", i2c_data); err = po1030_write_sensor(sd, PO1030_REG_INTEGLINES_H, @@ -208,7 +208,7 @@ int po1030_set_exposure(struct gspca_dev *gspca_dev, __s32 val) goto out; i2c_data = (val & 0xff); - PDEBUG(DBG_V4L2, "Set exposure to low byte to 0x%x", + PDEBUG(D_V4L2, "Set exposure to low byte to 0x%x", i2c_data); err = po1030_write_sensor(sd, PO1030_REG_INTEGLINES_M, &i2c_data, 1); @@ -226,7 +226,71 @@ int po1030_get_gain(struct gspca_dev *gspca_dev, __s32 *val) err = po1030_read_sensor(sd, PO1030_REG_GLOBALGAIN, &i2c_data, 1); *val = i2c_data; - PDEBUG(DBG_V4L2_CID, "Read global gain %d", *val); + PDEBUG(D_V4L2, "Read global gain %d", *val); + + return (err < 0) ? err : 0; +} + +int po1030_get_hflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + err = po1030_read_sensor(sd, PO1030_REG_CONTROL2, + &i2c_data, 1); + + *val = (i2c_data >> 7) & 0x01 ; + + PDEBUG(D_V4L2, "Read hflip %d", *val); + + return (err < 0) ? err : 0; +} + +int po1030_set_hflip(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + PDEBUG(D_V4L2, "Set hflip %d", val); + + i2c_data = (val & 0x01) << 7; + + err = po1030_write_sensor(sd, PO1030_REG_CONTROL2, + &i2c_data, 1); + + return (err < 0) ? err : 0; +} + +int po1030_get_vflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + err = po1030_read_sensor(sd, PO1030_REG_GLOBALGAIN, + &i2c_data, 1); + + *val = (i2c_data >> 6) & 0x01; + + PDEBUG(D_V4L2, "Read vflip %d", *val); + + return (err < 0) ? err : 0; +} + +int po1030_set_vflip(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + u8 i2c_data; + int err; + + PDEBUG(D_V4L2, "Set vflip %d", val); + + i2c_data = (val & 0x01) << 6; + + err = po1030_write_sensor(sd, PO1030_REG_CONTROL2, + &i2c_data, 1); return (err < 0) ? err : 0; } @@ -238,7 +302,7 @@ int po1030_set_gain(struct gspca_dev *gspca_dev, __s32 val) int err; i2c_data = val & 0xff; - PDEBUG(DBG_V4L2, "Set global gain to %d", i2c_data); + PDEBUG(D_V4L2, "Set global gain to %d", i2c_data); err = po1030_write_sensor(sd, PO1030_REG_GLOBALGAIN, &i2c_data, 1); return (err < 0) ? err : 0; @@ -253,7 +317,7 @@ int po1030_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val) err = po1030_read_sensor(sd, PO1030_REG_RED_GAIN, &i2c_data, 1); *val = i2c_data; - PDEBUG(DBG_V4L2_CID, "Read red gain %d", *val); + PDEBUG(D_V4L2, "Read red gain %d", *val); return (err < 0) ? err : 0; } @@ -264,7 +328,7 @@ int po1030_set_red_balance(struct gspca_dev *gspca_dev, __s32 val) int err; i2c_data = val & 0xff; - PDEBUG(DBG_V4L2, "Set red gain to %d", i2c_data); + PDEBUG(D_V4L2, "Set red gain to %d", i2c_data); err = po1030_write_sensor(sd, PO1030_REG_RED_GAIN, &i2c_data, 1); return (err < 0) ? err : 0; @@ -279,7 +343,7 @@ int po1030_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val) err = po1030_read_sensor(sd, PO1030_REG_BLUE_GAIN, &i2c_data, 1); *val = i2c_data; - PDEBUG(DBG_V4L2_CID, "Read blue gain %d", *val); + PDEBUG(D_V4L2, "Read blue gain %d", *val); return (err < 0) ? err : 0; } @@ -290,7 +354,7 @@ int po1030_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val) u8 i2c_data; int err; i2c_data = val & 0xff; - PDEBUG(DBG_V4L2, "Set blue gain to %d", i2c_data); + PDEBUG(D_V4L2, "Set blue gain to %d", i2c_data); err = po1030_write_sensor(sd, PO1030_REG_BLUE_GAIN, &i2c_data, 1); diff --git a/drivers/media/video/gspca/m5602/m5602_po1030.h b/drivers/media/video/gspca/m5602/m5602_po1030.h index 68f34c97bf44..a0b75ff61d79 100644 --- a/drivers/media/video/gspca/m5602/m5602_po1030.h +++ b/drivers/media/video/gspca/m5602/m5602_po1030.h @@ -1,8 +1,7 @@ /* * Driver for the po1030 sensor. - * This is probably a pixel plus sensor but we haven't identified it yet * - * Copyright (c) 2008 Erik Andren + * Copyright (c) 2008 Erik Andrén * Copyright (c) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. * Copyright (c) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> * @@ -109,10 +108,13 @@ #define PO1030_REG_YCONTRAST 0x74 #define PO1030_REG_YSATURATION 0x75 +#define PO1030_HFLIP (1 << 7) +#define PO1030_VFLIP (1 << 6) + /*****************************************************************************/ #define PO1030_GLOBAL_GAIN_DEFAULT 0x12 -#define PO1030_EXPOSURE_DEFAULT 0xf0ff +#define PO1030_EXPOSURE_DEFAULT 0x0085 #define PO1030_BLUE_GAIN_DEFAULT 0x40 #define PO1030_RED_GAIN_DEFAULT 0x40 @@ -121,7 +123,6 @@ /* Kernel module parameters */ extern int force_sensor; extern int dump_sensor; -extern unsigned int m5602_debug; int po1030_probe(struct sd *sd); int po1030_init(struct sd *sd); @@ -142,6 +143,10 @@ int po1030_get_red_balance(struct gspca_dev *gspca_dev, __s32 *val); int po1030_set_red_balance(struct gspca_dev *gspca_dev, __s32 val); int po1030_get_blue_balance(struct gspca_dev *gspca_dev, __s32 *val); int po1030_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val); +int po1030_get_hflip(struct gspca_dev *gspca_dev, __s32 *val); +int po1030_set_hflip(struct gspca_dev *gspca_dev, __s32 val); +int po1030_get_vflip(struct gspca_dev *gspca_dev, __s32 *val); +int po1030_set_vflip(struct gspca_dev *gspca_dev, __s32 val); static struct m5602_sensor po1030 = { .name = "PO1030", @@ -152,7 +157,7 @@ static struct m5602_sensor po1030 = { .init = po1030_init, .power_down = po1030_power_down, - .nctrls = 4, + .nctrls = 6, .ctrls = { { { @@ -160,7 +165,7 @@ static struct m5602_sensor po1030 = { .type = V4L2_CTRL_TYPE_INTEGER, .name = "gain", .minimum = 0x00, - .maximum = 0xff, + .maximum = 0x4f, .step = 0x1, .default_value = PO1030_GLOBAL_GAIN_DEFAULT, .flags = V4L2_CTRL_FLAG_SLIDER @@ -173,7 +178,7 @@ static struct m5602_sensor po1030 = { .type = V4L2_CTRL_TYPE_INTEGER, .name = "exposure", .minimum = 0x00, - .maximum = 0xffff, + .maximum = 0x02ff, .step = 0x1, .default_value = PO1030_EXPOSURE_DEFAULT, .flags = V4L2_CTRL_FLAG_SLIDER @@ -206,8 +211,33 @@ static struct m5602_sensor po1030 = { }, .set = po1030_set_blue_balance, .get = po1030_get_blue_balance + }, { + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "horizontal flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, + .set = po1030_set_hflip, + .get = po1030_get_hflip + }, { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "vertical flip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + }, + .set = po1030_set_vflip, + .get = po1030_get_vflip } }, + .nmodes = 1, .modes = { { @@ -381,7 +411,7 @@ static const unsigned char init_po1030[][4] = /* Set the y window to 1 */ {SENSOR, PO1030_REG_WINDOWY_H, 0x00}, - {SENSOR, PO1030_REG_WINDOWX_L, 0x01}, + {SENSOR, PO1030_REG_WINDOWY_L, 0x01}, {SENSOR, PO1030_REG_WINDOWWIDTH_H, 0x02}, {SENSOR, PO1030_REG_WINDOWWIDTH_L, 0x87}, diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c index 68202565325d..14b1eac5b812 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c @@ -1,7 +1,7 @@ /* * Driver for the s5k4aa sensor * - * Copyright (C) 2008 Erik Andren + * Copyright (C) 2008 Erik Andrén * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> * @@ -117,7 +117,7 @@ int s5k4aa_read_sensor(struct sd *sd, const u8 address, for (i = 0; (i < len) & !err; i++) { err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i])); - PDEBUG(DBG_TRACE, "Reading sensor register " + PDEBUG(D_CONF, "Reading sensor register " "0x%x containing 0x%x ", address, *i2c_data); } out: @@ -150,7 +150,7 @@ int s5k4aa_write_sensor(struct sd *sd, const u8 address, memcpy(p, sensor_urb_skeleton + 16, 4); p[3] = i2c_data[i]; p += 4; - PDEBUG(DBG_TRACE, "Writing sensor register 0x%x with 0x%x", + PDEBUG(D_CONF, "Writing sensor register 0x%x with 0x%x", address, i2c_data[i]); } @@ -248,7 +248,7 @@ int s5k4aa_get_exposure(struct gspca_dev *gspca_dev, __s32 *val) *val = data << 8; err = s5k4aa_read_sensor(sd, S5K4AA_EXPOSURE_LO, &data, 1); *val |= data; - PDEBUG(DBG_V4L2_CID, "Read exposure %d", *val); + PDEBUG(D_V4L2, "Read exposure %d", *val); out: return (err < 0) ? err : 0; } @@ -259,7 +259,7 @@ int s5k4aa_set_exposure(struct gspca_dev *gspca_dev, __s32 val) u8 data = S5K4AA_PAGE_MAP_2; int err; - PDEBUG(DBG_V4L2_CID, "Set exposure to %d", val); + PDEBUG(D_V4L2, "Set exposure to %d", val); err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); if (err < 0) goto out; @@ -285,7 +285,7 @@ int s5k4aa_get_vflip(struct gspca_dev *gspca_dev, __s32 *val) err = s5k4aa_read_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); *val = (data & S5K4AA_RM_V_FLIP) >> 7; - PDEBUG(DBG_V4L2_CID, "Read vertical flip %d", *val); + PDEBUG(D_V4L2, "Read vertical flip %d", *val); out: return (err < 0) ? err : 0; @@ -297,7 +297,7 @@ int s5k4aa_set_vflip(struct gspca_dev *gspca_dev, __s32 val) u8 data = S5K4AA_PAGE_MAP_2; int err; - PDEBUG(DBG_V4L2_CID, "Set vertical flip to %d", val); + PDEBUG(D_V4L2, "Set vertical flip to %d", val); err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); if (err < 0) goto out; @@ -341,7 +341,7 @@ int s5k4aa_get_hflip(struct gspca_dev *gspca_dev, __s32 *val) err = s5k4aa_read_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); *val = (data & S5K4AA_RM_H_FLIP) >> 6; - PDEBUG(DBG_V4L2_CID, "Read horizontal flip %d", *val); + PDEBUG(D_V4L2, "Read horizontal flip %d", *val); out: return (err < 0) ? err : 0; } @@ -352,7 +352,7 @@ int s5k4aa_set_hflip(struct gspca_dev *gspca_dev, __s32 val) u8 data = S5K4AA_PAGE_MAP_2; int err; - PDEBUG(DBG_V4L2_CID, "Set horizontal flip to %d", + PDEBUG(D_V4L2, "Set horizontal flip to %d", val); err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); if (err < 0) @@ -397,7 +397,7 @@ int s5k4aa_get_gain(struct gspca_dev *gspca_dev, __s32 *val) err = s5k4aa_read_sensor(sd, S5K4AA_GAIN_2, &data, 1); *val = data; - PDEBUG(DBG_V4L2_CID, "Read gain %d", *val); + PDEBUG(D_V4L2, "Read gain %d", *val); out: return (err < 0) ? err : 0; @@ -409,7 +409,7 @@ int s5k4aa_set_gain(struct gspca_dev *gspca_dev, __s32 val) u8 data = S5K4AA_PAGE_MAP_2; int err; - PDEBUG(DBG_V4L2_CID, "Set gain to %d", val); + PDEBUG(D_V4L2, "Set gain to %d", val); err = s5k4aa_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1); if (err < 0) goto out; diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.h b/drivers/media/video/gspca/m5602/m5602_s5k4aa.h index bb7f7e3e90af..eaef67655afa 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.h +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.h @@ -1,7 +1,7 @@ /* * Driver for the s5k4aa sensor * - * Copyright (C) 2008 Erik Andren + * Copyright (C) 2008 Erik Andrén * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> * @@ -63,7 +63,6 @@ /* Kernel module parameters */ extern int force_sensor; extern int dump_sensor; -extern unsigned int m5602_debug; int s5k4aa_probe(struct sd *sd); int s5k4aa_init(struct sd *sd); diff --git a/drivers/media/video/gspca/m5602/m5602_s5k83a.c b/drivers/media/video/gspca/m5602/m5602_s5k83a.c index b4b33c2d0499..8988a728e0b4 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k83a.c +++ b/drivers/media/video/gspca/m5602/m5602_s5k83a.c @@ -1,7 +1,7 @@ /* * Driver for the s5k83a sensor * - * Copyright (C) 2008 Erik Andren + * Copyright (C) 2008 Erik Andrén * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> * @@ -101,7 +101,7 @@ int s5k83a_read_sensor(struct sd *sd, const u8 address, for (i = 0; i < len && !len; i++) { err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i])); - PDEBUG(DBG_TRACE, "Reading sensor register " + PDEBUG(D_CONF, "Reading sensor register " "0x%x containing 0x%x ", address, *i2c_data); } @@ -135,7 +135,7 @@ int s5k83a_write_sensor(struct sd *sd, const u8 address, memcpy(p, sensor_urb_skeleton + 16, 4); p[3] = i2c_data[i]; p += 4; - PDEBUG(DBG_TRACE, "Writing sensor register 0x%x with 0x%x", + PDEBUG(D_CONF, "Writing sensor register 0x%x with 0x%x", address, i2c_data[i]); } diff --git a/drivers/media/video/gspca/m5602/m5602_s5k83a.h b/drivers/media/video/gspca/m5602/m5602_s5k83a.h index 833708eb5a42..ee3ee9cfca1d 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k83a.h +++ b/drivers/media/video/gspca/m5602/m5602_s5k83a.h @@ -1,7 +1,7 @@ /* * Driver for the s5k83a sensor * - * Copyright (C) 2008 Erik Andren + * Copyright (C) 2008 Erik Andrén * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> * @@ -41,8 +41,6 @@ /* Kernel module parameters */ extern int force_sensor; extern int dump_sensor; -extern unsigned int m5602_debug; - int s5k83a_probe(struct sd *sd); int s5k83a_init(struct sd *sd); diff --git a/drivers/media/video/gspca/m5602/m5602_sensor.h b/drivers/media/video/gspca/m5602/m5602_sensor.h index 930fcaab4416..60c9a48e0c02 100644 --- a/drivers/media/video/gspca/m5602/m5602_sensor.h +++ b/drivers/media/video/gspca/m5602/m5602_sensor.h @@ -1,7 +1,7 @@ /* * USB Driver for ALi m5602 based webcams * - * Copyright (C) 2008 Erik Andren + * Copyright (C) 2008 Erik Andrén * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project. * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br> * diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c index b561f7c4f066..eac245d7a756 100644 --- a/drivers/media/video/gspca/t613.c +++ b/drivers/media/video/gspca/t613.c @@ -50,7 +50,7 @@ struct sd { __u8 sensor; #define SENSOR_TAS5130A 0 -#define SENSOR_OTHER 1 +#define SENSOR_OM6802 1 }; /* V4L2 controls supported by the driver */ @@ -188,7 +188,7 @@ static struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 1, .step = 1, - .default_value = 1, + .default_value = 0, }, .set = sd_setwhitebalance, .get = sd_getwhitebalance @@ -261,6 +261,59 @@ static struct v4l2_pix_format vga_mode_t16[] = { .priv = 0}, }; +/* sensor specific data */ +struct additional_sensor_data { + const __u8 data1[20]; + const __u8 data2[18]; + const __u8 data3[18]; + const __u8 data4[4]; + const __u8 data5[6]; + const __u8 stream[4]; +}; + +const static struct additional_sensor_data sensor_data[] = { + { /* TAS5130A */ + .data1 = + {0xd0, 0xbb, 0xd1, 0x28, 0xd2, 0x10, 0xd3, 0x10, + 0xd4, 0xbb, 0xd5, 0x28, 0xd6, 0x1e, 0xd7, 0x27, + 0xd8, 0xc8, 0xd9, 0xfc}, + .data2 = + {0xe0, 0x60, 0xe1, 0xa8, 0xe2, 0xe0, 0xe3, 0x60, + 0xe4, 0xa8, 0xe5, 0xe0, 0xe6, 0x60, 0xe7, 0xa8, + 0xe8, 0xe0}, + .data3 = + {0xc7, 0x60, 0xc8, 0xa8, 0xc9, 0xe0, 0xca, 0x60, + 0xcb, 0xa8, 0xcc, 0xe0, 0xcd, 0x60, 0xce, 0xa8, + 0xcf, 0xe0}, + .data4 = /* Freq (50/60Hz). Splitted for test purpose */ + {0x66, 0x00, 0xa8, 0xe8}, + .data5 = + {0x0c, 0x03, 0xab, 0x10, 0x81, 0x20}, + .stream = + {0x0b, 0x04, 0x0a, 0x40}, + }, + { /* OM6802 */ + .data1 = + {0xd0, 0xc2, 0xd1, 0x28, 0xd2, 0x0f, 0xd3, 0x22, + 0xd4, 0xcd, 0xd5, 0x27, 0xd6, 0x2c, 0xd7, 0x06, + 0xd8, 0xb3, 0xd9, 0xfc}, + .data2 = + {0xe0, 0x80, 0xe1, 0xff, 0xe2, 0xff, 0xe3, 0x80, + 0xe4, 0xff, 0xe5, 0xff, 0xe6, 0x80, 0xe7, 0xff, + 0xe8, 0xff}, + .data3 = + {0xc7, 0x80, 0xc8, 0xff, 0xc9, 0xff, 0xca, 0x80, + 0xcb, 0xff, 0xcc, 0xff, 0xcd, 0x80, 0xce, 0xff, + 0xcf, 0xff}, + .data4 = /*Freq (50/60Hz). Splitted for test purpose */ + {0x66, 0xca, 0xa8, 0xf0 }, + .data5 = /* this could be removed later */ + {0x0c, 0x03, 0xab, 0x13, 0x81, 0x23}, + .stream = + {0x0b, 0x04, 0x0a, 0x78}, + } +}; + #define MAX_EFFECTS 7 /* easily done by soft, this table could be removed, * i keep it here just in case */ @@ -365,6 +418,8 @@ static const __u8 tas5130a_sensor_init[][8] = { {}, }; +static __u8 sensor_reset[] = {0x61, 0x68, 0x62, 0xff, 0x60, 0x07}; + /* read 1 byte */ static int reg_r(struct gspca_dev *gspca_dev, __u16 index) @@ -385,12 +440,12 @@ static void reg_w(struct gspca_dev *gspca_dev, usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), 0, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0, index, NULL, 0, 500); } -static void i2c_w(struct gspca_dev *gspca_dev, +static void reg_w_buf(struct gspca_dev *gspca_dev, const __u8 *buffer, __u16 len) { if (len <= USB_BUF_SZ) { @@ -398,7 +453,7 @@ static void i2c_w(struct gspca_dev *gspca_dev, usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), 0, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0x01, 0, gspca_dev->usb_buf, len, 500); } else { @@ -409,14 +464,15 @@ static void i2c_w(struct gspca_dev *gspca_dev, usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), 0, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0x01, 0, tmpbuf, len, 500); kfree(tmpbuf); } } -static void other_sensor_init(struct gspca_dev *gspca_dev) +/* Reported as OM6802*/ +static void om6802_sensor_init(struct gspca_dev *gspca_dev) { int i; const __u8 *p; @@ -436,19 +492,32 @@ static void other_sensor_init(struct gspca_dev *gspca_dev) 0x90, 0x24, 0x91, 0xb2, 0x82, 0x32, - 0xfd, 0x00, - 0xfd, 0x01, 0xfd, 0x41, 0x00 /* table end */ }; + reg_w_buf(gspca_dev, sensor_reset, sizeof sensor_reset); + msleep(5); + i = 4; + while (--i < 0) { + byte = reg_r(gspca_dev, 0x0060); + if (!(byte & 0x01)) + break; + msleep(100); + } + byte = reg_r(gspca_dev, 0x0063); + if (byte != 0x17) { + err("Bad sensor reset %02x", byte); + /* continue? */ + } + p = sensor_init; while (*p != 0) { val[1] = *p++; val[3] = *p++; if (*p == 0) reg_w(gspca_dev, 0x3c80); - i2c_w(gspca_dev, val, sizeof val); + reg_w_buf(gspca_dev, val, sizeof val); i = 4; while (--i >= 0) { msleep(15); @@ -457,7 +526,8 @@ static void other_sensor_init(struct gspca_dev *gspca_dev) break; } } - reg_w(gspca_dev, 0x3c80); + msleep(15); + reg_w(gspca_dev, 0x3c80); } /* this function is called at probe time */ @@ -485,12 +555,75 @@ static int sd_config(struct gspca_dev *gspca_dev, return 0; } +static void setbrightness(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + unsigned int brightness; + __u8 set6[4] = { 0x8f, 0x24, 0xc3, 0x00 }; + + brightness = sd->brightness; + if (brightness < 7) { + set6[1] = 0x26; + set6[3] = 0x70 - brightness * 0x10; + } else { + set6[3] = 0x00 + ((brightness - 7) * 0x10); + } + + reg_w_buf(gspca_dev, set6, sizeof set6); +} + +static void setcontrast(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + unsigned int contrast = sd->contrast; + __u16 reg_to_write; + + if (contrast < 7) + reg_to_write = 0x8ea9 - contrast * 0x200; + else + reg_to_write = 0x00a9 + (contrast - 7) * 0x200; + + reg_w(gspca_dev, reg_to_write); +} + +static void setcolors(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + __u16 reg_to_write; + + reg_to_write = 0x80bb + sd->colors * 0x100; /* was 0xc0 */ + reg_w(gspca_dev, reg_to_write); +} + static void setgamma(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; PDEBUG(D_CONF, "Gamma: %d", sd->gamma); - i2c_w(gspca_dev, gamma_table[sd->gamma], sizeof gamma_table[0]); + reg_w_buf(gspca_dev, gamma_table[sd->gamma], sizeof gamma_table[0]); +} + +static void setwhitebalance(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + __u8 white_balance[8] = + {0x87, 0x20, 0x88, 0x20, 0x89, 0x20, 0x80, 0x38}; + + if (sd->whitebalance) + white_balance[7] = 0x3c; + + reg_w_buf(gspca_dev, white_balance, sizeof white_balance); +} + +static void setsharpness(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + __u16 reg_to_write; + + reg_to_write = 0x0aa6 + 0x1000 * sd->sharpness; + + reg_w(gspca_dev, reg_to_write); } /* this function is called at probe and resume time */ @@ -511,8 +644,6 @@ static int sd_init(struct gspca_dev *gspca_dev) {0x08, 0x03, 0x09, 0x03, 0x12, 0x04}; static const __u8 n2[] = {0x08, 0x00}; - static const __u8 nset[] = - { 0x61, 0x68, 0x62, 0xff, 0x60, 0x07 }; static const __u8 n3[] = {0x61, 0x68, 0x65, 0x0a, 0x60, 0x04}; static const __u8 n4[] = @@ -525,51 +656,29 @@ static int sd_init(struct gspca_dev *gspca_dev) 0x65, 0x0a, 0xbb, 0x86, 0xaf, 0x58, 0xb0, 0x68, 0x87, 0x40, 0x89, 0x2b, 0x8d, 0xff, 0x83, 0x40, 0xac, 0x84, 0xad, 0x86, 0xaf, 0x46}; - static const __u8 nset4[] = { - 0xe0, 0x60, 0xe1, 0xa8, 0xe2, 0xe0, 0xe3, 0x60, 0xe4, 0xa8, - 0xe5, 0xe0, 0xe6, 0x60, 0xe7, 0xa8, - 0xe8, 0xe0 - }; - /* ojo puede ser 0xe6 en vez de 0xe9 */ - static const __u8 nset2[] = { - 0xd0, 0xbb, 0xd1, 0x28, 0xd2, 0x10, 0xd3, 0x10, 0xd4, 0xbb, - 0xd5, 0x28, 0xd6, 0x1e, 0xd7, 0x27, - 0xd8, 0xc8, 0xd9, 0xfc - }; - static const __u8 missing[] = - { 0x87, 0x20, 0x88, 0x20, 0x89, 0x20, 0x80, 0x38 }; - static const __u8 nset3[] = { - 0xc7, 0x60, 0xc8, 0xa8, 0xc9, 0xe0, 0xca, 0x60, 0xcb, 0xa8, - 0xcc, 0xe0, 0xcd, 0x60, 0xce, 0xa8, - 0xcf, 0xe0 - }; - static const __u8 nset5[] = - { 0x8f, 0x24, 0xc3, 0x00 }; /* bright */ - static const __u8 nset7[4] = - { 0x66, 0xca, 0xa8, 0xf8 }; /* 50/60 Hz */ static const __u8 nset9[4] = { 0x0b, 0x04, 0x0a, 0x78 }; static const __u8 nset8[6] = { 0xa8, 0xf0, 0xc6, 0x88, 0xc0, 0x00 }; - static const __u8 nset10[6] = - { 0x0c, 0x03, 0xab, 0x10, 0x81, 0x20 }; byte = reg_r(gspca_dev, 0x06); test_byte = reg_r(gspca_dev, 0x07); if (byte == 0x08 && test_byte == 0x07) { - PDEBUG(D_CONF, "other sensor"); - sd->sensor = SENSOR_OTHER; + PDEBUG(D_CONF, "sensor om6802"); + sd->sensor = SENSOR_OM6802; + } else if (byte == 0x08 && test_byte == 0x01) { + PDEBUG(D_CONF, "sensor tas5130a"); + sd->sensor = SENSOR_TAS5130A; } else { - PDEBUG(D_CONF, "sensor %02x %02x", byte, test_byte); + PDEBUG(D_CONF, "unknown sensor %02x %02x", byte, test_byte); sd->sensor = SENSOR_TAS5130A; } - i2c_w(gspca_dev, n1, sizeof n1); + reg_w_buf(gspca_dev, n1, sizeof n1); test_byte = 0; i = 5; while (--i >= 0) { - i2c_w(gspca_dev, nset, sizeof nset); - msleep(5); + reg_w_buf(gspca_dev, sensor_reset, sizeof sensor_reset); test_byte = reg_r(gspca_dev, 0x0063); msleep(100); if (test_byte == 0x17) @@ -580,7 +689,7 @@ static int sd_init(struct gspca_dev *gspca_dev) /* return -EIO; */ /*fixme: test - continue */ } - i2c_w(gspca_dev, n2, sizeof n2); + reg_w_buf(gspca_dev, n2, sizeof n2); i = 0; while (read_indexs[i] != 0x00) { @@ -590,56 +699,50 @@ static int sd_init(struct gspca_dev *gspca_dev) i++; } - i2c_w(gspca_dev, n3, sizeof n3); - i2c_w(gspca_dev, n4, sizeof n4); + reg_w_buf(gspca_dev, n3, sizeof n3); + reg_w_buf(gspca_dev, n4, sizeof n4); reg_r(gspca_dev, 0x0080); reg_w(gspca_dev, 0x2c80); - i2c_w(gspca_dev, nset2, sizeof nset2); - i2c_w(gspca_dev, nset3, sizeof nset3); - i2c_w(gspca_dev, nset4, sizeof nset4); + + reg_w_buf(gspca_dev, sensor_data[sd->sensor].data1, + sizeof sensor_data[sd->sensor].data1); + reg_w_buf(gspca_dev, sensor_data[sd->sensor].data3, + sizeof sensor_data[sd->sensor].data3); + reg_w_buf(gspca_dev, sensor_data[sd->sensor].data2, + sizeof sensor_data[sd->sensor].data2); + reg_w(gspca_dev, 0x3880); reg_w(gspca_dev, 0x3880); reg_w(gspca_dev, 0x338e); - i2c_w(gspca_dev, nset5, sizeof nset5); - reg_w(gspca_dev, 0x00a9); - setgamma(gspca_dev); - reg_w(gspca_dev, 0x86bb); - reg_w(gspca_dev, 0x4aa6); - i2c_w(gspca_dev, missing, sizeof missing); + setbrightness(gspca_dev); + setcontrast(gspca_dev); + setgamma(gspca_dev); + setcolors(gspca_dev); + setsharpness(gspca_dev); + setwhitebalance(gspca_dev); - reg_w(gspca_dev, 0x2087); + reg_w(gspca_dev, 0x2087); /* tied to white balance? */ reg_w(gspca_dev, 0x2088); reg_w(gspca_dev, 0x2089); - i2c_w(gspca_dev, nset7, sizeof nset7); - i2c_w(gspca_dev, nset10, sizeof nset10); - i2c_w(gspca_dev, nset8, sizeof nset8); - i2c_w(gspca_dev, nset9, sizeof nset9); + reg_w_buf(gspca_dev, sensor_data[sd->sensor].data4, + sizeof sensor_data[sd->sensor].data4); + reg_w_buf(gspca_dev, sensor_data[sd->sensor].data5, + sizeof sensor_data[sd->sensor].data5); + reg_w_buf(gspca_dev, nset8, sizeof nset8); + reg_w_buf(gspca_dev, nset9, sizeof nset9); reg_w(gspca_dev, 0x2880); - i2c_w(gspca_dev, nset2, sizeof nset2); - i2c_w(gspca_dev, nset3, sizeof nset3); - i2c_w(gspca_dev, nset4, sizeof nset4); - - return 0; -} - -static void setbrightness(struct gspca_dev *gspca_dev) -{ - struct sd *sd = (struct sd *) gspca_dev; - unsigned int brightness; - __u8 set6[4] = { 0x8f, 0x26, 0xc3, 0x00 }; - brightness = sd->brightness; - if (brightness < 7) { - set6[3] = 0x70 - brightness * 0x10; - } else { - set6[1] = 0x24; - set6[3] = 0x00 + ((brightness - 7) * 0x10); - } + reg_w_buf(gspca_dev, sensor_data[sd->sensor].data1, + sizeof sensor_data[sd->sensor].data1); + reg_w_buf(gspca_dev, sensor_data[sd->sensor].data3, + sizeof sensor_data[sd->sensor].data3); + reg_w_buf(gspca_dev, sensor_data[sd->sensor].data2, + sizeof sensor_data[sd->sensor].data2); - i2c_w(gspca_dev, set6, sizeof set6); + return 0; } static void setflip(struct gspca_dev *gspca_dev) @@ -651,14 +754,15 @@ static void setflip(struct gspca_dev *gspca_dev) if (sd->mirror) flipcmd[3] = 0x01; - i2c_w(gspca_dev, flipcmd, sizeof flipcmd); + reg_w_buf(gspca_dev, flipcmd, sizeof flipcmd); } static void seteffect(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - i2c_w(gspca_dev, effects_table[sd->effect], sizeof effects_table[0]); + reg_w_buf(gspca_dev, effects_table[sd->effect], + sizeof effects_table[0]); if (sd->effect == 1 || sd->effect == 5) { PDEBUG(D_CONF, "This effect have been disabled for webcam \"safety\""); @@ -671,19 +775,6 @@ static void seteffect(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0xfaa6); } -static void setwhitebalance(struct gspca_dev *gspca_dev) -{ - struct sd *sd = (struct sd *) gspca_dev; - - __u8 white_balance[8] = - { 0x87, 0x20, 0x88, 0x20, 0x89, 0x20, 0x80, 0x38 }; - - if (sd->whitebalance == 1) - white_balance[7] = 0x3c; - - i2c_w(gspca_dev, white_balance, sizeof white_balance); -} - static void setlightfreq(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -692,52 +783,46 @@ static void setlightfreq(struct gspca_dev *gspca_dev) if (sd->freq == 2) /* 60hz */ freq[1] = 0x00; - i2c_w(gspca_dev, freq, sizeof freq); + reg_w_buf(gspca_dev, freq, sizeof freq); } -static void setcontrast(struct gspca_dev *gspca_dev) +/* Is this really needed? + * i added some module parameters for test with some users */ +static void poll_sensor(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - unsigned int contrast = sd->contrast; - __u16 reg_to_write; - - if (contrast < 7) - reg_to_write = 0x8ea9 - (0x200 * contrast); - else - reg_to_write = (0x00a9 + ((contrast - 7) * 0x200)); - - reg_w(gspca_dev, reg_to_write); -} - -static void setcolors(struct gspca_dev *gspca_dev) -{ - struct sd *sd = (struct sd *) gspca_dev; - __u16 reg_to_write; - - reg_to_write = 0xc0bb + sd->colors * 0x100; - reg_w(gspca_dev, reg_to_write); -} - -static void setsharpness(struct gspca_dev *gspca_dev) -{ - struct sd *sd = (struct sd *) gspca_dev; - __u16 reg_to_write; - - reg_to_write = 0x0aa6 + 0x1000 * sd->sharpness; - - reg_w(gspca_dev, reg_to_write); + static const __u8 poll1[] = + {0x67, 0x05, 0x68, 0x81, 0x69, 0x80, 0x6a, 0x82, + 0x6b, 0x68, 0x6c, 0x69, 0x72, 0xd9, 0x73, 0x34, + 0x74, 0x32, 0x75, 0x92, 0x76, 0x00, 0x09, 0x01, + 0x60, 0x14}; + static const __u8 poll2[] = + {0x67, 0x02, 0x68, 0x71, 0x69, 0x72, 0x72, 0xa9, + 0x73, 0x02, 0x73, 0x02, 0x60, 0x14}; + static const __u8 poll3[] = + {0x87, 0x3f, 0x88, 0x20, 0x89, 0x2d}; + static const __u8 poll4[] = + {0xa6, 0x0a, 0xea, 0xcf, 0xbe, 0x26, 0xb1, 0x5f, + 0xa1, 0xb1, 0xda, 0x6b, 0xdb, 0x98, 0xdf, 0x0c, + 0xc2, 0x80, 0xc3, 0x10}; + + if (sd->sensor != SENSOR_TAS5130A) { + PDEBUG(D_STREAM, "[Sensor requires polling]"); + reg_w_buf(gspca_dev, poll1, sizeof poll1); + reg_w_buf(gspca_dev, poll2, sizeof poll2); + reg_w_buf(gspca_dev, poll3, sizeof poll3); + reg_w_buf(gspca_dev, poll4, sizeof poll4); + } } static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int i, mode; - static const __u8 t1[] = { 0x66, 0x00, 0xa8, 0xe8 }; __u8 t2[] = { 0x07, 0x00, 0x0d, 0x60, 0x0e, 0x80 }; static const __u8 t3[] = { 0xb3, 0x07, 0xb4, 0x00, 0xb5, 0x88, 0xb6, 0x02, 0xb7, 0x06, 0xb8, 0x00, 0xb9, 0xe7, 0xba, 0x01 }; - static const __u8 t4[] = { 0x0b, 0x04, 0x0a, 0x40 }; mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode]. priv; switch (mode) { @@ -760,25 +845,29 @@ static int sd_start(struct gspca_dev *gspca_dev) if (sd->sensor == SENSOR_TAS5130A) { i = 0; while (tas5130a_sensor_init[i][0] != 0) { - i2c_w(gspca_dev, tas5130a_sensor_init[i], + reg_w_buf(gspca_dev, tas5130a_sensor_init[i], sizeof tas5130a_sensor_init[0]); i++; } reg_w(gspca_dev, 0x3c80); /* just in case and to keep sync with logs (for mine) */ - i2c_w(gspca_dev, tas5130a_sensor_init[3], + reg_w_buf(gspca_dev, tas5130a_sensor_init[3], sizeof tas5130a_sensor_init[0]); reg_w(gspca_dev, 0x3c80); } else { - other_sensor_init(gspca_dev); + om6802_sensor_init(gspca_dev); } - /* just in case and to keep sync with logs (for mine) */ - i2c_w(gspca_dev, t1, sizeof t1); - i2c_w(gspca_dev, t2, sizeof t2); + reg_w_buf(gspca_dev, sensor_data[sd->sensor].data4, + sizeof sensor_data[sd->sensor].data4); reg_r(gspca_dev, 0x0012); - i2c_w(gspca_dev, t3, sizeof t3); + reg_w_buf(gspca_dev, t2, sizeof t2); + reg_w_buf(gspca_dev, t3, sizeof t3); reg_w(gspca_dev, 0x0013); - i2c_w(gspca_dev, t4, sizeof t4); + msleep(15); + reg_w_buf(gspca_dev, sensor_data[sd->sensor].stream, + sizeof sensor_data[sd->sensor].stream); + poll_sensor(gspca_dev); + /* restart on each start, just in case, sometimes regs goes wrong * when using controls from app */ setbrightness(gspca_dev); @@ -787,6 +876,19 @@ static int sd_start(struct gspca_dev *gspca_dev) return 0; } +static void sd_stopN(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + reg_w_buf(gspca_dev, sensor_data[sd->sensor].stream, + sizeof sensor_data[sd->sensor].stream); + msleep(20); + reg_w_buf(gspca_dev, sensor_data[sd->sensor].stream, + sizeof sensor_data[sd->sensor].stream); + msleep(20); + reg_w(gspca_dev, 0x0309); +} + static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ __u8 *data, /* isoc packet */ @@ -1036,6 +1138,7 @@ static const struct sd_desc sd_desc = { .config = sd_config, .init = sd_init, .start = sd_start, + .stopN = sd_stopN, .pkt_scan = sd_pkt_scan, .querymenu = sd_querymenu, }; diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c index b7457fc60ba5..1c404e454a36 100644 --- a/drivers/media/video/ivtv/ivtv-fileops.c +++ b/drivers/media/video/ivtv/ivtv-fileops.c @@ -600,13 +600,14 @@ retry: since we may get here before the stream has been fully set-up */ if (mode == OUT_YUV && s->q_full.length == 0 && itv->dma_data_req_size) { while (count >= itv->dma_data_req_size) { - if (!ivtv_yuv_udma_stream_frame (itv, (void __user *)user_buf)) { - bytes_written += itv->dma_data_req_size; - user_buf += itv->dma_data_req_size; - count -= itv->dma_data_req_size; - } else { - break; - } + rc = ivtv_yuv_udma_stream_frame(itv, (void __user *)user_buf); + + if (rc < 0) + return rc; + + bytes_written += itv->dma_data_req_size; + user_buf += itv->dma_data_req_size; + count -= itv->dma_data_req_size; } if (count == 0) { IVTV_DEBUG_HI_FILE("Wrote %d bytes to %s (%d)\n", bytes_written, s->name, s->q_full.bytesused); diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index 8696527ab134..208fb54842f2 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -509,7 +509,6 @@ static int ivtv_try_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_ static int ivtv_try_fmt_vid_out(struct file *file, void *fh, struct v4l2_format *fmt) { struct ivtv_open_id *id = fh; - struct ivtv *itv = id->itv; s32 w = fmt->fmt.pix.width; s32 h = fmt->fmt.pix.height; int field = fmt->fmt.pix.field; @@ -517,7 +516,22 @@ static int ivtv_try_fmt_vid_out(struct file *file, void *fh, struct v4l2_format w = min(w, 720); w = max(w, 2); - h = min(h, itv->is_out_50hz ? 576 : 480); + /* Why can the height be 576 even when the output is NTSC? + + Internally the buffers of the PVR350 are always set to 720x576. The + decoded video frame will always be placed in the top left corner of + this buffer. For any video which is not 720x576, the buffer will + then be cropped to remove the unused right and lower areas, with + the remaining image being scaled by the hardware to fit the display + area. The video can be scaled both up and down, so a 720x480 video + can be displayed full-screen on PAL and a 720x576 video can be + displayed without cropping on NTSC. + + Note that the scaling only occurs on the video stream, the osd + resolution is locked to the broadcast standard and not scaled. + + Thanks to Ian Armstrong for this explanation. */ + h = min(h, 576); h = max(h, 2); if (id->type == IVTV_DEC_STREAM_TYPE_YUV) fmt->fmt.pix.field = field; diff --git a/drivers/media/video/ks0127.c b/drivers/media/video/ks0127.c index 2fd4b4a44aa9..bae2d2beb709 100644 --- a/drivers/media/video/ks0127.c +++ b/drivers/media/video/ks0127.c @@ -33,27 +33,20 @@ * V1.1 Gerard v.d. Horst Added some debugoutput, reset the video-standard */ -#ifndef __KERNEL__ -#define __KERNEL__ -#endif - #include <linux/init.h> #include <linux/module.h> #include <linux/delay.h> #include <linux/errno.h> #include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/proc_fs.h> -#include "ks0127.h" - #include <linux/i2c.h> #include <linux/video_decoder.h> +#include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv-legacy.h> +#include "ks0127.h" -#define dprintk if (debug) printk - -/* i2c identification */ -#define I2C_KS0127_ADDON 0xD8 -#define I2C_KS0127_ONBOARD 0xDA +MODULE_DESCRIPTION("KS0127 video decoder driver"); +MODULE_AUTHOR("Ryan Drake"); +MODULE_LICENSE("GPL"); #define KS_TYPE_UNKNOWN 0 #define KS_TYPE_0122S 1 @@ -204,8 +197,6 @@ struct adjust { }; struct ks0127 { - struct i2c_client *client; - unsigned char addr; int format_width; int format_height; int cap_width; @@ -220,16 +211,18 @@ static int debug; /* insmod parameter */ module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug output"); -MODULE_LICENSE("GPL"); static u8 reg_defaults[64]; - - static void init_reg_defaults(void) { + static int initialized; u8 *table = reg_defaults; + if (initialized) + return; + initialized = 1; + table[KS_CMDA] = 0x2c; /* VSE=0, CCIR 601, autodetect standard */ table[KS_CMDB] = 0x12; /* VALIGN=0, AGC control and input */ table[KS_CMDC] = 0x00; /* Test options */ @@ -308,50 +301,53 @@ static void init_reg_defaults(void) * An explanation from kayork@mail.utexas.edu: * * During I2C reads, the KS0127 only samples for a stop condition - * during the place where the acknoledge bit should be. Any standard + * during the place where the acknowledge bit should be. Any standard * I2C implementation (correctly) throws in another clock transition * at the 9th bit, and the KS0127 will not recognize the stop condition * and will continue to clock out data. * * So we have to do the read ourself. Big deal. - workaround in i2c-algo-bit + * workaround in i2c-algo-bit */ -static u8 ks0127_read(struct ks0127 *ks, u8 reg) +static u8 ks0127_read(struct i2c_client *c, u8 reg) { - struct i2c_client *c = ks->client; char val = 0; struct i2c_msg msgs[] = { - {c->addr, 0, sizeof(reg), ®}, - {c->addr, I2C_M_RD | I2C_M_NO_RD_ACK, sizeof(val), &val}}; + { c->addr, 0, sizeof(reg), ® }, + { c->addr, I2C_M_RD | I2C_M_NO_RD_ACK, sizeof(val), &val } + }; int ret; ret = i2c_transfer(c->adapter, msgs, ARRAY_SIZE(msgs)); if (ret != ARRAY_SIZE(msgs)) - dprintk("ks0127_write error\n"); + v4l_dbg(1, debug, c, "read error\n"); return val; } -static void ks0127_write(struct ks0127 *ks, u8 reg, u8 val) +static void ks0127_write(struct i2c_client *c, u8 reg, u8 val) { - char msg[] = {reg, val}; + struct ks0127 *ks = i2c_get_clientdata(c); + char msg[] = { reg, val }; - if (i2c_master_send(ks->client, msg, sizeof(msg)) != sizeof(msg)) - dprintk("ks0127_write error\n"); + if (i2c_master_send(c, msg, sizeof(msg)) != sizeof(msg)) + v4l_dbg(1, debug, c, "write error\n"); ks->regs[reg] = val; } /* generic bit-twiddling */ -static void ks0127_and_or(struct ks0127 *ks, u8 reg, u8 and_v, u8 or_v) +static void ks0127_and_or(struct i2c_client *client, u8 reg, u8 and_v, u8 or_v) { + struct ks0127 *ks = i2c_get_clientdata(client); + u8 val = ks->regs[reg]; val = (val & and_v) | or_v; - ks0127_write(ks, reg, val); + ks0127_write(client, reg, val); } @@ -359,73 +355,69 @@ static void ks0127_and_or(struct ks0127 *ks, u8 reg, u8 and_v, u8 or_v) /**************************************************************************** * ks0127 private api ****************************************************************************/ -static void ks0127_reset(struct ks0127* ks) +static void ks0127_reset(struct i2c_client *c) { - int i; + struct ks0127 *ks = i2c_get_clientdata(c); u8 *table = reg_defaults; + int i; ks->ks_type = KS_TYPE_UNKNOWN; - dprintk("ks0127: reset\n"); + v4l_dbg(1, debug, c, "reset\n"); msleep(1); /* initialize all registers to known values */ /* (except STAT, 0x21, 0x22, TEST and 0x38,0x39) */ - for(i = 1; i < 33; i++) - ks0127_write(ks, i, table[i]); + for (i = 1; i < 33; i++) + ks0127_write(c, i, table[i]); - for(i = 35; i < 40; i++) - ks0127_write(ks, i, table[i]); + for (i = 35; i < 40; i++) + ks0127_write(c, i, table[i]); - for(i = 41; i < 56; i++) - ks0127_write(ks, i, table[i]); + for (i = 41; i < 56; i++) + ks0127_write(c, i, table[i]); - for(i = 58; i < 64; i++) - ks0127_write(ks, i, table[i]); + for (i = 58; i < 64; i++) + ks0127_write(c, i, table[i]); - if ((ks0127_read(ks, KS_STAT) & 0x80) == 0) { + if ((ks0127_read(c, KS_STAT) & 0x80) == 0) { ks->ks_type = KS_TYPE_0122S; - dprintk("ks0127: ks0122s Found\n"); + v4l_dbg(1, debug, c, "ks0122s found\n"); return; } - switch(ks0127_read(ks, KS_CMDE) & 0x0f) { - + switch (ks0127_read(c, KS_CMDE) & 0x0f) { case 0: ks->ks_type = KS_TYPE_0127; - dprintk("ks0127: ks0127 found\n"); + v4l_dbg(1, debug, c, "ks0127 found\n"); break; case 9: ks->ks_type = KS_TYPE_0127B; - dprintk("ks0127: ks0127B Revision A found\n"); + v4l_dbg(1, debug, c, "ks0127B Revision A found\n"); break; default: - dprintk("ks0127: unknown revision\n"); + v4l_dbg(1, debug, c, "unknown revision\n"); break; } } -static int ks0127_command(struct i2c_client *client, - unsigned int cmd, void *arg) +static int ks0127_command(struct i2c_client *c, unsigned cmd, void *arg) { - struct ks0127 *ks = i2c_get_clientdata(client); - - int *iarg = (int*)arg; - + struct ks0127 *ks = i2c_get_clientdata(c); + int *iarg = (int *)arg; int status; if (!ks) return -ENODEV; switch (cmd) { - case DECODER_INIT: - dprintk("ks0127: command DECODER_INIT\n"); - ks0127_reset(ks); + v4l_dbg(1, debug, c, "DECODER_INIT\n"); + ks0127_reset(c); break; case DECODER_SET_INPUT: @@ -436,161 +428,160 @@ static int ks0127_command(struct i2c_client *client, case KS_INPUT_COMPOSITE_4: case KS_INPUT_COMPOSITE_5: case KS_INPUT_COMPOSITE_6: - dprintk("ks0127: command DECODER_SET_INPUT %d: " - "Composite\n", *iarg); + v4l_dbg(1, debug, c, + "DECODER_SET_INPUT %d: Composite\n", *iarg); /* autodetect 50/60 Hz */ - ks0127_and_or(ks, KS_CMDA, 0xfc, 0x00); + ks0127_and_or(c, KS_CMDA, 0xfc, 0x00); /* VSE=0 */ - ks0127_and_or(ks, KS_CMDA, ~0x40, 0x00); + ks0127_and_or(c, KS_CMDA, ~0x40, 0x00); /* set input line */ - ks0127_and_or(ks, KS_CMDB, 0xb0, *iarg); + ks0127_and_or(c, KS_CMDB, 0xb0, *iarg); /* non-freerunning mode */ - ks0127_and_or(ks, KS_CMDC, 0x70, 0x0a); + ks0127_and_or(c, KS_CMDC, 0x70, 0x0a); /* analog input */ - ks0127_and_or(ks, KS_CMDD, 0x03, 0x00); + ks0127_and_or(c, KS_CMDD, 0x03, 0x00); /* enable chroma demodulation */ - ks0127_and_or(ks, KS_CTRACK, 0xcf, 0x00); + ks0127_and_or(c, KS_CTRACK, 0xcf, 0x00); /* chroma trap, HYBWR=1 */ - ks0127_and_or(ks, KS_LUMA, 0x00, + ks0127_and_or(c, KS_LUMA, 0x00, (reg_defaults[KS_LUMA])|0x0c); /* scaler fullbw, luma comb off */ - ks0127_and_or(ks, KS_VERTIA, 0x08, 0x81); + ks0127_and_or(c, KS_VERTIA, 0x08, 0x81); /* manual chroma comb .25 .5 .25 */ - ks0127_and_or(ks, KS_VERTIC, 0x0f, 0x90); + ks0127_and_or(c, KS_VERTIC, 0x0f, 0x90); /* chroma path delay */ - ks0127_and_or(ks, KS_CHROMB, 0x0f, 0x90); + ks0127_and_or(c, KS_CHROMB, 0x0f, 0x90); - ks0127_write(ks, KS_UGAIN, reg_defaults[KS_UGAIN]); - ks0127_write(ks, KS_VGAIN, reg_defaults[KS_VGAIN]); - ks0127_write(ks, KS_UVOFFH, reg_defaults[KS_UVOFFH]); - ks0127_write(ks, KS_UVOFFL, reg_defaults[KS_UVOFFL]); + ks0127_write(c, KS_UGAIN, reg_defaults[KS_UGAIN]); + ks0127_write(c, KS_VGAIN, reg_defaults[KS_VGAIN]); + ks0127_write(c, KS_UVOFFH, reg_defaults[KS_UVOFFH]); + ks0127_write(c, KS_UVOFFL, reg_defaults[KS_UVOFFL]); break; case KS_INPUT_SVIDEO_1: case KS_INPUT_SVIDEO_2: case KS_INPUT_SVIDEO_3: - dprintk("ks0127: command DECODER_SET_INPUT %d: " - "S-Video\n", *iarg); + v4l_dbg(1, debug, c, + "DECODER_SET_INPUT %d: S-Video\n", *iarg); /* autodetect 50/60 Hz */ - ks0127_and_or(ks, KS_CMDA, 0xfc, 0x00); + ks0127_and_or(c, KS_CMDA, 0xfc, 0x00); /* VSE=0 */ - ks0127_and_or(ks, KS_CMDA, ~0x40, 0x00); + ks0127_and_or(c, KS_CMDA, ~0x40, 0x00); /* set input line */ - ks0127_and_or(ks, KS_CMDB, 0xb0, *iarg); + ks0127_and_or(c, KS_CMDB, 0xb0, *iarg); /* non-freerunning mode */ - ks0127_and_or(ks, KS_CMDC, 0x70, 0x0a); + ks0127_and_or(c, KS_CMDC, 0x70, 0x0a); /* analog input */ - ks0127_and_or(ks, KS_CMDD, 0x03, 0x00); + ks0127_and_or(c, KS_CMDD, 0x03, 0x00); /* enable chroma demodulation */ - ks0127_and_or(ks, KS_CTRACK, 0xcf, 0x00); - ks0127_and_or(ks, KS_LUMA, 0x00, + ks0127_and_or(c, KS_CTRACK, 0xcf, 0x00); + ks0127_and_or(c, KS_LUMA, 0x00, reg_defaults[KS_LUMA]); /* disable luma comb */ - ks0127_and_or(ks, KS_VERTIA, 0x08, + ks0127_and_or(c, KS_VERTIA, 0x08, (reg_defaults[KS_VERTIA]&0xf0)|0x01); - ks0127_and_or(ks, KS_VERTIC, 0x0f, + ks0127_and_or(c, KS_VERTIC, 0x0f, reg_defaults[KS_VERTIC]&0xf0); - ks0127_and_or(ks, KS_CHROMB, 0x0f, + ks0127_and_or(c, KS_CHROMB, 0x0f, reg_defaults[KS_CHROMB]&0xf0); - ks0127_write(ks, KS_UGAIN, reg_defaults[KS_UGAIN]); - ks0127_write(ks, KS_VGAIN, reg_defaults[KS_VGAIN]); - ks0127_write(ks, KS_UVOFFH, reg_defaults[KS_UVOFFH]); - ks0127_write(ks, KS_UVOFFL, reg_defaults[KS_UVOFFL]); + ks0127_write(c, KS_UGAIN, reg_defaults[KS_UGAIN]); + ks0127_write(c, KS_VGAIN, reg_defaults[KS_VGAIN]); + ks0127_write(c, KS_UVOFFH, reg_defaults[KS_UVOFFH]); + ks0127_write(c, KS_UVOFFL, reg_defaults[KS_UVOFFL]); break; case KS_INPUT_YUV656: - dprintk("ks0127: command DECODER_SET_INPUT 15: " - "YUV656\n"); + v4l_dbg(1, debug, c, + "DECODER_SET_INPUT 15: YUV656\n"); if (ks->norm == VIDEO_MODE_NTSC || ks->norm == KS_STD_PAL_M) /* force 60 Hz */ - ks0127_and_or(ks, KS_CMDA, 0xfc, 0x03); + ks0127_and_or(c, KS_CMDA, 0xfc, 0x03); else /* force 50 Hz */ - ks0127_and_or(ks, KS_CMDA, 0xfc, 0x02); + ks0127_and_or(c, KS_CMDA, 0xfc, 0x02); - ks0127_and_or(ks, KS_CMDA, 0xff, 0x40); /* VSE=1 */ + ks0127_and_or(c, KS_CMDA, 0xff, 0x40); /* VSE=1 */ /* set input line and VALIGN */ - ks0127_and_or(ks, KS_CMDB, 0xb0, (*iarg | 0x40)); + ks0127_and_or(c, KS_CMDB, 0xb0, (*iarg | 0x40)); /* freerunning mode, */ /* TSTGEN = 1 TSTGFR=11 TSTGPH=0 TSTGPK=0 VMEM=1*/ - ks0127_and_or(ks, KS_CMDC, 0x70, 0x87); + ks0127_and_or(c, KS_CMDC, 0x70, 0x87); /* digital input, SYNDIR = 0 INPSL=01 CLKDIR=0 EAV=0 */ - ks0127_and_or(ks, KS_CMDD, 0x03, 0x08); + ks0127_and_or(c, KS_CMDD, 0x03, 0x08); /* disable chroma demodulation */ - ks0127_and_or(ks, KS_CTRACK, 0xcf, 0x30); + ks0127_and_or(c, KS_CTRACK, 0xcf, 0x30); /* HYPK =01 CTRAP = 0 HYBWR=0 PED=1 RGBH=1 UNIT=1 */ - ks0127_and_or(ks, KS_LUMA, 0x00, 0x71); - ks0127_and_or(ks, KS_VERTIC, 0x0f, + ks0127_and_or(c, KS_LUMA, 0x00, 0x71); + ks0127_and_or(c, KS_VERTIC, 0x0f, reg_defaults[KS_VERTIC]&0xf0); /* scaler fullbw, luma comb off */ - ks0127_and_or(ks, KS_VERTIA, 0x08, 0x81); + ks0127_and_or(c, KS_VERTIA, 0x08, 0x81); - ks0127_and_or(ks, KS_CHROMB, 0x0f, + ks0127_and_or(c, KS_CHROMB, 0x0f, reg_defaults[KS_CHROMB]&0xf0); - ks0127_and_or(ks, KS_CON, 0x00, 0x00); - ks0127_and_or(ks, KS_BRT, 0x00, 32); /* spec: 34 */ + ks0127_and_or(c, KS_CON, 0x00, 0x00); + ks0127_and_or(c, KS_BRT, 0x00, 32); /* spec: 34 */ /* spec: 229 (e5) */ - ks0127_and_or(ks, KS_SAT, 0x00, 0xe8); - ks0127_and_or(ks, KS_HUE, 0x00, 0); + ks0127_and_or(c, KS_SAT, 0x00, 0xe8); + ks0127_and_or(c, KS_HUE, 0x00, 0); - ks0127_and_or(ks, KS_UGAIN, 0x00, 238); - ks0127_and_or(ks, KS_VGAIN, 0x00, 0x00); + ks0127_and_or(c, KS_UGAIN, 0x00, 238); + ks0127_and_or(c, KS_VGAIN, 0x00, 0x00); /*UOFF:0x30, VOFF:0x30, TSTCGN=1 */ - ks0127_and_or(ks, KS_UVOFFH, 0x00, 0x4f); - ks0127_and_or(ks, KS_UVOFFL, 0x00, 0x00); + ks0127_and_or(c, KS_UVOFFH, 0x00, 0x4f); + ks0127_and_or(c, KS_UVOFFL, 0x00, 0x00); break; default: - dprintk("ks0127: command DECODER_SET_INPUT: " - "Unknown input %d\n", *iarg); + v4l_dbg(1, debug, c, + "DECODER_SET_INPUT: Unknown input %d\n", *iarg); break; } /* hack: CDMLPF sometimes spontaneously switches on; */ /* force back off */ - ks0127_write(ks, KS_DEMOD, reg_defaults[KS_DEMOD]); + ks0127_write(c, KS_DEMOD, reg_defaults[KS_DEMOD]); break; case DECODER_SET_OUTPUT: switch(*iarg) { case KS_OUTPUT_YUV656E: - dprintk("ks0127: command DECODER_SET_OUTPUT: " - "OUTPUT_YUV656E (Missing)\n"); + v4l_dbg(1, debug, c, + "DECODER_SET_OUTPUT: OUTPUT_YUV656E (Missing)\n"); return -EINVAL; - break; case KS_OUTPUT_EXV: - dprintk("ks0127: command DECODER_SET_OUTPUT: " - "OUTPUT_EXV\n"); - ks0127_and_or(ks, KS_OFMTA, 0xf0, 0x09); + v4l_dbg(1, debug, c, + "DECODER_SET_OUTPUT: OUTPUT_EXV\n"); + ks0127_and_or(c, KS_OFMTA, 0xf0, 0x09); break; } break; - case DECODER_SET_NORM: //sam This block mixes old and new norm names... + case DECODER_SET_NORM: /* sam This block mixes old and new norm names... */ /* Set to automatic SECAM/Fsc mode */ - ks0127_and_or(ks, KS_DEMOD, 0xf0, 0x00); + ks0127_and_or(c, KS_DEMOD, 0xf0, 0x00); ks->norm = *iarg; - switch(*iarg) - { + switch (*iarg) { /* this is untested !! */ /* It just detects PAL_N/NTSC_M (no special frequencies) */ /* And you have to set the standard a second time afterwards */ case VIDEO_MODE_AUTO: - dprintk("ks0127: command DECODER_SET_NORM: AUTO\n"); + v4l_dbg(1, debug, c, + "DECODER_SET_NORM: AUTO\n"); /* The chip determines the format */ /* based on the current field rate */ - ks0127_and_or(ks, KS_CMDA, 0xfc, 0x00); - ks0127_and_or(ks, KS_CHROMA, 0x9f, 0x20); + ks0127_and_or(c, KS_CMDA, 0xfc, 0x00); + ks0127_and_or(c, KS_CHROMA, 0x9f, 0x20); /* This is wrong for PAL ! As I said, */ /* you need to set the standard once again !! */ ks->format_height = 240; @@ -598,84 +589,86 @@ static int ks0127_command(struct i2c_client *client, break; case VIDEO_MODE_NTSC: - dprintk("ks0127: command DECODER_SET_NORM: NTSC_M\n"); - ks0127_and_or(ks, KS_CHROMA, 0x9f, 0x20); + v4l_dbg(1, debug, c, + "DECODER_SET_NORM: NTSC_M\n"); + ks0127_and_or(c, KS_CHROMA, 0x9f, 0x20); ks->format_height = 240; ks->format_width = 704; break; case KS_STD_NTSC_N: - dprintk("ks0127: command KS0127_SET_STANDARD: " - "NTSC_N (fixme)\n"); - ks0127_and_or(ks, KS_CHROMA, 0x9f, 0x40); + v4l_dbg(1, debug, c, + "KS0127_SET_NORM: NTSC_N (fixme)\n"); + ks0127_and_or(c, KS_CHROMA, 0x9f, 0x40); ks->format_height = 240; ks->format_width = 704; break; case VIDEO_MODE_PAL: - dprintk("ks0127: command DECODER_SET_NORM: PAL_N\n"); - ks0127_and_or(ks, KS_CHROMA, 0x9f, 0x20); + v4l_dbg(1, debug, c, + "DECODER_SET_NORM: PAL_N\n"); + ks0127_and_or(c, KS_CHROMA, 0x9f, 0x20); ks->format_height = 290; ks->format_width = 704; break; case KS_STD_PAL_M: - dprintk("ks0127: command KS0127_SET_STANDARD: " - "PAL_M (fixme)\n"); - ks0127_and_or(ks, KS_CHROMA, 0x9f, 0x40); + v4l_dbg(1, debug, c, + "KS0127_SET_NORM: PAL_M (fixme)\n"); + ks0127_and_or(c, KS_CHROMA, 0x9f, 0x40); ks->format_height = 290; ks->format_width = 704; break; case VIDEO_MODE_SECAM: - dprintk("ks0127: command KS0127_SET_STANDARD: " - "SECAM\n"); + v4l_dbg(1, debug, c, + "KS0127_SET_NORM: SECAM\n"); ks->format_height = 290; ks->format_width = 704; /* set to secam autodetection */ - ks0127_and_or(ks, KS_CHROMA, 0xdf, 0x20); - ks0127_and_or(ks, KS_DEMOD, 0xf0, 0x00); + ks0127_and_or(c, KS_CHROMA, 0xdf, 0x20); + ks0127_and_or(c, KS_DEMOD, 0xf0, 0x00); schedule_timeout_interruptible(HZ/10+1); /* did it autodetect? */ - if (ks0127_read(ks, KS_DEMOD) & 0x40) + if (ks0127_read(c, KS_DEMOD) & 0x40) break; /* force to secam mode */ - ks0127_and_or(ks, KS_DEMOD, 0xf0, 0x0f); + ks0127_and_or(c, KS_DEMOD, 0xf0, 0x0f); break; default: - dprintk("ks0127: command DECODER_SET_NORM: " - "Unknown norm %d\n", *iarg); + v4l_dbg(1, debug, c, + "DECODER_SET_NORM: Unknown norm %d\n", *iarg); break; } break; case DECODER_SET_PICTURE: - dprintk("ks0127: command DECODER_SET_PICTURE " - "not yet supported (fixme)\n"); + v4l_dbg(1, debug, c, + "DECODER_SET_PICTURE: not yet supported\n"); return -EINVAL; - //sam todo: KS0127_SET_BRIGHTNESS: Merge into DECODER_SET_PICTURE - //sam todo: KS0127_SET_CONTRAST: Merge into DECODER_SET_PICTURE - //sam todo: KS0127_SET_HUE: Merge into DECODER_SET_PICTURE? - //sam todo: KS0127_SET_SATURATION: Merge into DECODER_SET_PICTURE - //sam todo: KS0127_SET_AGC_MODE: - //sam todo: KS0127_SET_AGC: - //sam todo: KS0127_SET_CHROMA_MODE: - //sam todo: KS0127_SET_PIXCLK_MODE: - //sam todo: KS0127_SET_GAMMA_MODE: - //sam todo: KS0127_SET_UGAIN: - //sam todo: KS0127_SET_VGAIN: - //sam todo: KS0127_SET_INVALY: - //sam todo: KS0127_SET_INVALU: - //sam todo: KS0127_SET_INVALV: - //sam todo: KS0127_SET_UNUSEY: - //sam todo: KS0127_SET_UNUSEU: - //sam todo: KS0127_SET_UNUSEV: - //sam todo: KS0127_SET_VSALIGN_MODE: + /* sam todo: KS0127_SET_BRIGHTNESS: Merge into DECODER_SET_PICTURE */ + /* sam todo: KS0127_SET_CONTRAST: Merge into DECODER_SET_PICTURE */ + /* sam todo: KS0127_SET_HUE: Merge into DECODER_SET_PICTURE? */ + /* sam todo: KS0127_SET_SATURATION: Merge into DECODER_SET_PICTURE */ + /* sam todo: KS0127_SET_AGC_MODE: */ + /* sam todo: KS0127_SET_AGC: */ + /* sam todo: KS0127_SET_CHROMA_MODE: */ + /* sam todo: KS0127_SET_PIXCLK_MODE: */ + /* sam todo: KS0127_SET_GAMMA_MODE: */ + /* sam todo: KS0127_SET_UGAIN: */ + /* sam todo: KS0127_SET_VGAIN: */ + /* sam todo: KS0127_SET_INVALY: */ + /* sam todo: KS0127_SET_INVALU: */ + /* sam todo: KS0127_SET_INVALV: */ + /* sam todo: KS0127_SET_UNUSEY: */ + /* sam todo: KS0127_SET_UNUSEU: */ + /* sam todo: KS0127_SET_UNUSEV: */ + /* sam todo: KS0127_SET_VSALIGN_MODE: */ case DECODER_ENABLE_OUTPUT: { @@ -684,34 +677,32 @@ static int ks0127_command(struct i2c_client *client, iarg = arg; enable = (*iarg != 0); if (enable) { - dprintk("ks0127: command " - "DECODER_ENABLE_OUTPUT on " - "(%d)\n", enable); + v4l_dbg(1, debug, c, + "DECODER_ENABLE_OUTPUT on\n"); /* All output pins on */ - ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x30); + ks0127_and_or(c, KS_OFMTA, 0xcf, 0x30); /* Obey the OEN pin */ - ks0127_and_or(ks, KS_CDEM, 0x7f, 0x00); + ks0127_and_or(c, KS_CDEM, 0x7f, 0x00); } else { - dprintk("ks0127: command " - "DECODER_ENABLE_OUTPUT off " - "(%d)\n", enable); + v4l_dbg(1, debug, c, + "DECODER_ENABLE_OUTPUT off\n"); /* Video output pins off */ - ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x00); + ks0127_and_or(c, KS_OFMTA, 0xcf, 0x00); /* Ignore the OEN pin */ - ks0127_and_or(ks, KS_CDEM, 0x7f, 0x80); + ks0127_and_or(c, KS_CDEM, 0x7f, 0x80); } - } break; + } - //sam todo: KS0127_SET_OUTPUT_MODE: - //sam todo: KS0127_SET_WIDTH: - //sam todo: KS0127_SET_HEIGHT: - //sam todo: KS0127_SET_HSCALE: + /* sam todo: KS0127_SET_OUTPUT_MODE: */ + /* sam todo: KS0127_SET_WIDTH: */ + /* sam todo: KS0127_SET_HEIGHT: */ + /* sam todo: KS0127_SET_HSCALE: */ case DECODER_GET_STATUS: - dprintk("ks0127: command DECODER_GET_STATUS\n"); + v4l_dbg(1, debug, c, "DECODER_GET_STATUS\n"); *iarg = 0; - status = ks0127_read(ks, KS_STAT); + status = ks0127_read(c, KS_STAT); if (!(status & 0x20)) /* NOVID not set */ *iarg = (*iarg | DECODER_STATUS_GOOD); if ((status & 0x01)) /* CLOCK set */ @@ -722,124 +713,81 @@ static int ks0127_command(struct i2c_client *client, *iarg = (*iarg | DECODER_STATUS_NTSC); break; - //Catch any unknown command + /* Catch any unknown command */ default: - dprintk("ks0127: command unknown: %04X\n", cmd); + v4l_dbg(1, debug, c, "unknown: 0x%08x\n", cmd); return -EINVAL; } return 0; } - - -static int ks0127_probe(struct i2c_adapter *adapter); -static int ks0127_detach(struct i2c_client *client); -static int ks0127_command(struct i2c_client *client, - unsigned int cmd, void *arg); - - - /* Addresses to scan */ -static unsigned short normal_i2c[] = {I2C_KS0127_ADDON>>1, - I2C_KS0127_ONBOARD>>1, I2C_CLIENT_END}; -static unsigned short probe[2] = {I2C_CLIENT_END, I2C_CLIENT_END}; -static unsigned short ignore[2] = {I2C_CLIENT_END, I2C_CLIENT_END}; -static struct i2c_client_address_data addr_data = { - normal_i2c, - probe, - ignore, -}; +#define I2C_KS0127_ADDON 0xD8 +#define I2C_KS0127_ONBOARD 0xDA -static struct i2c_driver i2c_driver_ks0127 = { - .driver.name = "ks0127", - .id = I2C_DRIVERID_KS0127, - .attach_adapter = ks0127_probe, - .detach_client = ks0127_detach, - .command = ks0127_command +static unsigned short normal_i2c[] = { + I2C_KS0127_ADDON >> 1, + I2C_KS0127_ONBOARD >> 1, + I2C_CLIENT_END }; -static struct i2c_client ks0127_client_tmpl = -{ - .name = "(ks0127 unset)", - .addr = 0, - .adapter = NULL, - .driver = &i2c_driver_ks0127, -}; +I2C_CLIENT_INSMOD; -static int ks0127_found_proc(struct i2c_adapter *adapter, int addr, int kind) +static int ks0127_probe(struct i2c_client *c, const struct i2c_device_id *id) { struct ks0127 *ks; - struct i2c_client *client; - client = kzalloc(sizeof(*client), GFP_KERNEL); - if (client == NULL) - return -ENOMEM; - memcpy(client, &ks0127_client_tmpl, sizeof(*client)); + v4l_info(c, "%s chip found @ 0x%x (%s)\n", + c->addr == (I2C_KS0127_ADDON >> 1) ? "addon" : "on-board", + c->addr << 1, c->adapter->name); ks = kzalloc(sizeof(*ks), GFP_KERNEL); - if (ks == NULL) { - kfree(client); + if (ks == NULL) return -ENOMEM; - } - i2c_set_clientdata(client, ks); - client->adapter = adapter; - client->addr = addr; - sprintf(client->name, "ks0127-%02x", adapter->id); + i2c_set_clientdata(c, ks); - ks->client = client; - ks->addr = addr; ks->ks_type = KS_TYPE_UNKNOWN; /* power up */ - ks0127_write(ks, KS_CMDA, 0x2c); + init_reg_defaults(); + ks0127_write(c, KS_CMDA, 0x2c); mdelay(10); /* reset the device */ - ks0127_reset(ks); - printk(KERN_INFO "ks0127: attach: %s video decoder\n", - ks->addr==(I2C_KS0127_ADDON>>1) ? "addon" : "on-board"); - - i2c_attach_client(client); + ks0127_reset(c); return 0; } - -static int ks0127_probe(struct i2c_adapter *adapter) +static int ks0127_remove(struct i2c_client *c) { - if (adapter->id == I2C_HW_B_ZR36067) - return i2c_probe(adapter, &addr_data, ks0127_found_proc); - return 0; -} - -static int ks0127_detach(struct i2c_client *client) -{ - struct ks0127 *ks = i2c_get_clientdata(client); + struct ks0127 *ks = i2c_get_clientdata(c); - ks0127_write(ks, KS_OFMTA, 0x20); /*tristate*/ - ks0127_write(ks, KS_CMDA, 0x2c | 0x80); /* power down */ + ks0127_write(c, KS_OFMTA, 0x20); /* tristate */ + ks0127_write(c, KS_CMDA, 0x2c | 0x80); /* power down */ - i2c_detach_client(client); kfree(ks); - kfree(client); - - dprintk("ks0127: detach\n"); return 0; } - -static int __devinit ks0127_init_module(void) +static int ks0127_legacy_probe(struct i2c_adapter *adapter) { - init_reg_defaults(); - return i2c_add_driver(&i2c_driver_ks0127); + return adapter->id == I2C_HW_B_ZR36067; } -static void __devexit ks0127_cleanup_module(void) -{ - i2c_del_driver(&i2c_driver_ks0127); -} - - -module_init(ks0127_init_module); -module_exit(ks0127_cleanup_module); +static const struct i2c_device_id ks0127_id[] = { + { "ks0127", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ks0127_id); + +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "ks0127", + .driverid = I2C_DRIVERID_KS0127, + .command = ks0127_command, + .probe = ks0127_probe, + .remove = ks0127_remove, + .legacy_probe = ks0127_legacy_probe, + .id_table = ks0127_id, +}; diff --git a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c index 4aa82b310708..adf2ba79496a 100644 --- a/drivers/media/video/saa7110.c +++ b/drivers/media/video/saa7110.c @@ -31,36 +31,24 @@ #include <linux/delay.h> #include <linux/slab.h> #include <linux/wait.h> -#include <asm/io.h> #include <asm/uaccess.h> +#include <linux/i2c.h> +#include <linux/videodev.h> +#include <linux/video_decoder.h> +#include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv-legacy.h> MODULE_DESCRIPTION("Philips SAA7110 video decoder driver"); MODULE_AUTHOR("Pauline Middelink"); MODULE_LICENSE("GPL"); -#include <linux/i2c.h> - -#define I2C_NAME(s) (s)->name - -#include <linux/videodev.h> -#include <media/v4l2-common.h> -#include <linux/video_decoder.h> - static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); -#define dprintk(num, format, args...) \ - do { \ - if (debug >= num) \ - printk(format, ##args); \ - } while (0) - #define SAA7110_MAX_INPUT 9 /* 6 CVBS, 3 SVHS */ #define SAA7110_MAX_OUTPUT 0 /* its a decoder only */ -#define I2C_SAA7110 0x9C /* or 0x9E */ - #define SAA7110_NR_REG 0x35 struct saa7110 { @@ -81,10 +69,7 @@ struct saa7110 { /* I2C support functions */ /* ----------------------------------------------------------------------- */ -static int -saa7110_write (struct i2c_client *client, - u8 reg, - u8 value) +static int saa7110_write(struct i2c_client *client, u8 reg, u8 value) { struct saa7110 *decoder = i2c_get_clientdata(client); @@ -92,10 +77,7 @@ saa7110_write (struct i2c_client *client, return i2c_smbus_write_byte_data(client, reg, value); } -static int -saa7110_write_block (struct i2c_client *client, - const u8 *data, - unsigned int len) +static int saa7110_write_block(struct i2c_client *client, const u8 *data, unsigned int len) { int ret = -1; u8 reg = *data; /* first register to write to */ @@ -115,8 +97,8 @@ saa7110_write_block (struct i2c_client *client, memcpy(decoder->reg + reg, data + 1, len - 1); } else { for (++data, --len; len; len--) { - if ((ret = saa7110_write(client, reg++, - *data++)) < 0) + ret = saa7110_write(client, reg++, *data++); + if (ret < 0) break; } } @@ -124,8 +106,7 @@ saa7110_write_block (struct i2c_client *client, return ret; } -static inline int -saa7110_read (struct i2c_client *client) +static inline int saa7110_read(struct i2c_client *client) { return i2c_smbus_read_byte(client); } @@ -138,9 +119,7 @@ saa7110_read (struct i2c_client *client) #define FRESP_06H_SVIDEO 0x83 //0xC0 -static int -saa7110_selmux (struct i2c_client *client, - int chan) +static int saa7110_selmux(struct i2c_client *client, int chan) { static const unsigned char modes[9][8] = { /* mode 0 */ @@ -197,8 +176,7 @@ static const unsigned char initseq[1 + SAA7110_NR_REG] = { /* 0x30 */ 0x44, 0x71, 0x02, 0x8C, 0x02 }; -static int -determine_norm (struct i2c_client *client) +static int determine_norm(struct i2c_client *client) { DEFINE_WAIT(wait); struct saa7110 *decoder = i2c_get_clientdata(client); @@ -212,29 +190,23 @@ determine_norm (struct i2c_client *client) finish_wait(&decoder->wq, &wait); status = saa7110_read(client); if (status & 0x40) { - dprintk(1, KERN_INFO "%s: status=0x%02x (no signal)\n", - I2C_NAME(client), status); + v4l_dbg(1, debug, client, "status=0x%02x (no signal)\n", status); return decoder->norm; // no change } if ((status & 3) == 0) { saa7110_write(client, 0x06, 0x83); if (status & 0x20) { - dprintk(1, - KERN_INFO - "%s: status=0x%02x (NTSC/no color)\n", - I2C_NAME(client), status); + v4l_dbg(1, debug, client, "status=0x%02x (NTSC/no color)\n", status); //saa7110_write(client,0x2E,0x81); return VIDEO_MODE_NTSC; } - dprintk(1, KERN_INFO "%s: status=0x%02x (PAL/no color)\n", - I2C_NAME(client), status); + v4l_dbg(1, debug, client, "status=0x%02x (PAL/no color)\n", status); //saa7110_write(client,0x2E,0x9A); return VIDEO_MODE_PAL; } //saa7110_write(client,0x06,0x03); if (status & 0x20) { /* 60Hz */ - dprintk(1, KERN_INFO "%s: status=0x%02x (NTSC)\n", - I2C_NAME(client), status); + v4l_dbg(1, debug, client, "status=0x%02x (NTSC)\n", status); saa7110_write(client, 0x0D, 0x86); saa7110_write(client, 0x0F, 0x50); saa7110_write(client, 0x11, 0x2C); @@ -254,13 +226,11 @@ determine_norm (struct i2c_client *client) status = saa7110_read(client); if ((status & 0x03) == 0x01) { - dprintk(1, KERN_INFO "%s: status=0x%02x (SECAM)\n", - I2C_NAME(client), status); + v4l_dbg(1, debug, client, "status=0x%02x (SECAM)\n", status); saa7110_write(client, 0x0D, 0x87); return VIDEO_MODE_SECAM; } - dprintk(1, KERN_INFO "%s: status=0x%02x (PAL)\n", I2C_NAME(client), - status); + v4l_dbg(1, debug, client, "status=0x%02x (PAL)\n", status); return VIDEO_MODE_PAL; } @@ -286,8 +256,8 @@ saa7110_command (struct i2c_client *client, VIDEO_DECODER_SECAM | VIDEO_DECODER_AUTO; dc->inputs = SAA7110_MAX_INPUT; dc->outputs = SAA7110_MAX_OUTPUT; - } break; + } case DECODER_GET_STATUS: { @@ -295,8 +265,8 @@ saa7110_command (struct i2c_client *client, int res = 0; status = saa7110_read(client); - dprintk(1, KERN_INFO "%s: status=0x%02x norm=%d\n", - I2C_NAME(client), status, decoder->norm); + v4l_dbg(1, debug, client, "status=0x%02x norm=%d\n", + status, decoder->norm); if (!(status & 0x40)) res |= DECODER_STATUS_GOOD; if (status & 0x03) @@ -314,8 +284,8 @@ saa7110_command (struct i2c_client *client, break; } *(int *) arg = res; - } break; + } case DECODER_SET_NORM: v = *(int *) arg; @@ -328,34 +298,24 @@ saa7110_command (struct i2c_client *client, saa7110_write(client, 0x0F, 0x50); saa7110_write(client, 0x11, 0x2C); //saa7110_write(client, 0x2E, 0x81); - dprintk(1, - KERN_INFO "%s: switched to NTSC\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "switched to NTSC\n"); break; case VIDEO_MODE_PAL: saa7110_write(client, 0x0D, 0x86); saa7110_write(client, 0x0F, 0x10); saa7110_write(client, 0x11, 0x59); //saa7110_write(client, 0x2E, 0x9A); - dprintk(1, - KERN_INFO "%s: switched to PAL\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "switched to PAL\n"); break; case VIDEO_MODE_SECAM: saa7110_write(client, 0x0D, 0x87); saa7110_write(client, 0x0F, 0x10); saa7110_write(client, 0x11, 0x59); //saa7110_write(client, 0x2E, 0x9A); - dprintk(1, - KERN_INFO - "%s: switched to SECAM\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "switched to SECAM\n"); break; case VIDEO_MODE_AUTO: - dprintk(1, - KERN_INFO - "%s: TV standard detection...\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "switched to AUTO\n"); decoder->norm = determine_norm(client); *(int *) arg = decoder->norm; break; @@ -368,15 +328,12 @@ saa7110_command (struct i2c_client *client, case DECODER_SET_INPUT: v = *(int *) arg; if (v < 0 || v > SAA7110_MAX_INPUT) { - dprintk(1, - KERN_INFO "%s: input=%d not available\n", - I2C_NAME(client), v); + v4l_dbg(1, debug, client, "input=%d not available\n", v); return -EINVAL; } if (decoder->input != v) { saa7110_selmux(client, v); - dprintk(1, KERN_INFO "%s: switched to input=%d\n", - I2C_NAME(client), v); + v4l_dbg(1, debug, client, "switched to input=%d\n", v); } break; @@ -392,8 +349,7 @@ saa7110_command (struct i2c_client *client, if (decoder->enable != v) { decoder->enable = v; saa7110_write(client, 0x0E, v ? 0x18 : 0x80); - dprintk(1, KERN_INFO "%s: YUV %s\n", I2C_NAME(client), - v ? "on" : "off"); + v4l_dbg(1, debug, client, "YUV %s\n", v ? "on" : "off"); } break; @@ -423,23 +379,23 @@ saa7110_command (struct i2c_client *client, saa7110_write(client, 0x07, (decoder->hue >> 8) - 128); } - } break; + } case DECODER_DUMP: + if (!debug) + break; for (v = 0; v < SAA7110_NR_REG; v += 16) { int j; - dprintk(1, KERN_DEBUG "%s: %02x:", I2C_NAME(client), - v); + v4l_dbg(1, debug, client, "%02x:", v); for (j = 0; j < 16 && v + j < SAA7110_NR_REG; j++) - dprintk(1, " %02x", decoder->reg[v + j]); - dprintk(1, "\n"); + printk(KERN_CONT " %02x", decoder->reg[v + j]); + printk(KERN_CONT "\n"); } break; default: - dprintk(1, KERN_INFO "unknown saa7110_command??(%d)\n", - cmd); + v4l_dbg(1, debug, client, "unknown command %08x\n", cmd); return -EINVAL; } return 0; @@ -451,55 +407,28 @@ saa7110_command (struct i2c_client *client, * Generic i2c probe * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' */ -static unsigned short normal_i2c[] = { - I2C_SAA7110 >> 1, - (I2C_SAA7110 >> 1) + 1, - I2C_CLIENT_END -}; - -static unsigned short ignore = I2C_CLIENT_END; -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_i2c, - .probe = &ignore, - .ignore = &ignore, -}; +static unsigned short normal_i2c[] = { 0x9c >> 1, 0x9e >> 1, I2C_CLIENT_END }; -static struct i2c_driver i2c_driver_saa7110; +I2C_CLIENT_INSMOD; -static int -saa7110_detect_client (struct i2c_adapter *adapter, - int address, - int kind) +static int saa7110_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - struct i2c_client *client; struct saa7110 *decoder; int rv; - dprintk(1, - KERN_INFO - "saa7110.c: detecting saa7110 client on address 0x%x\n", - address << 1); - /* Check if the adapter supports the needed features */ - if (!i2c_check_functionality - (adapter, - I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) - return 0; + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -ENODEV; - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) - return -ENOMEM; - client->addr = address; - client->adapter = adapter; - client->driver = &i2c_driver_saa7110; - strlcpy(I2C_NAME(client), "saa7110", sizeof(I2C_NAME(client))); + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); decoder = kzalloc(sizeof(struct saa7110), GFP_KERNEL); - if (!decoder) { - kfree(client); + if (!decoder) return -ENOMEM; - } decoder->norm = VIDEO_MODE_PAL; decoder->input = 0; decoder->enable = 1; @@ -510,18 +439,10 @@ saa7110_detect_client (struct i2c_adapter *adapter, init_waitqueue_head(&decoder->wq); i2c_set_clientdata(client, decoder); - rv = i2c_attach_client(client); - if (rv) { - kfree(client); - kfree(decoder); - return rv; - } - rv = saa7110_write_block(client, initseq, sizeof(initseq)); - if (rv < 0) - dprintk(1, KERN_ERR "%s_attach: init status %d\n", - I2C_NAME(client), rv); - else { + if (rv < 0) { + v4l_dbg(1, debug, client, "init status %d\n", rv); + } else { int ver, status; saa7110_write(client, 0x21, 0x10); saa7110_write(client, 0x0e, 0x18); @@ -530,10 +451,8 @@ saa7110_detect_client (struct i2c_adapter *adapter, saa7110_write(client, 0x0D, 0x06); //mdelay(150); status = saa7110_read(client); - dprintk(1, - KERN_INFO - "%s_attach: SAA7110A version %x at 0x%02x, status=0x%02x\n", - I2C_NAME(client), ver, client->addr << 1, status); + v4l_dbg(1, debug, client, "version %x, status=0x%02x\n", + ver, status); saa7110_write(client, 0x0D, 0x86); saa7110_write(client, 0x0F, 0x10); saa7110_write(client, 0x11, 0x59); @@ -547,58 +466,25 @@ saa7110_detect_client (struct i2c_adapter *adapter, return 0; } -static int -saa7110_attach_adapter (struct i2c_adapter *adapter) -{ - dprintk(1, - KERN_INFO - "saa7110.c: starting probe for adapter %s (0x%x)\n", - I2C_NAME(adapter), adapter->id); - return i2c_probe(adapter, &addr_data, &saa7110_detect_client); -} - -static int -saa7110_detach_client (struct i2c_client *client) +static int saa7110_remove(struct i2c_client *client) { - struct saa7110 *decoder = i2c_get_clientdata(client); - int err; - - err = i2c_detach_client(client); - if (err) { - return err; - } - - kfree(decoder); - kfree(client); - + kfree(i2c_get_clientdata(client)); return 0; } /* ----------------------------------------------------------------------- */ -static struct i2c_driver i2c_driver_saa7110 = { - .driver = { - .name = "saa7110", - }, - - .id = I2C_DRIVERID_SAA7110, +static const struct i2c_device_id saa7110_id[] = { + { "saa7110", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa7110_id); - .attach_adapter = saa7110_attach_adapter, - .detach_client = saa7110_detach_client, +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "saa7110", + .driverid = I2C_DRIVERID_SAA7110, .command = saa7110_command, + .probe = saa7110_probe, + .remove = saa7110_remove, + .id_table = saa7110_id, }; - -static int __init -saa7110_init (void) -{ - return i2c_add_driver(&i2c_driver_saa7110); -} - -static void __exit -saa7110_exit (void) -{ - i2c_del_driver(&i2c_driver_saa7110); -} - -module_init(saa7110_init); -module_exit(saa7110_exit); diff --git a/drivers/media/video/saa7111.c b/drivers/media/video/saa7111.c index 96c3d4357722..a4738a2fb4d3 100644 --- a/drivers/media/video/saa7111.c +++ b/drivers/media/video/saa7111.c @@ -28,43 +28,24 @@ */ #include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/major.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/signal.h> #include <linux/types.h> -#include <linux/i2c.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> +#include <linux/ioctl.h> #include <asm/uaccess.h> - +#include <linux/i2c.h> +#include <linux/i2c-id.h> #include <linux/videodev.h> #include <linux/video_decoder.h> +#include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv-legacy.h> MODULE_DESCRIPTION("Philips SAA7111 video decoder driver"); MODULE_AUTHOR("Dave Perks"); MODULE_LICENSE("GPL"); - -#define I2C_NAME(s) (s)->name - - static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Debug level (0-1)"); -#define dprintk(num, format, args...) \ - do { \ - if (debug >= num) \ - printk(format, ##args); \ - } while (0) - /* ----------------------------------------------------------------------- */ #define SAA7111_NR_REG 0x18 @@ -77,14 +58,9 @@ struct saa7111 { int enable; }; -#define I2C_SAA7111 0x48 - /* ----------------------------------------------------------------------- */ -static inline int -saa7111_write (struct i2c_client *client, - u8 reg, - u8 value) +static inline int saa7111_write(struct i2c_client *client, u8 reg, u8 value) { struct saa7111 *decoder = i2c_get_clientdata(client); @@ -92,8 +68,7 @@ saa7111_write (struct i2c_client *client, return i2c_smbus_write_byte_data(client, reg, value); } -static inline void -saa7111_write_if_changed(struct i2c_client *client, u8 reg, u8 value) +static inline void saa7111_write_if_changed(struct i2c_client *client, u8 reg, u8 value) { struct saa7111 *decoder = i2c_get_clientdata(client); @@ -103,10 +78,7 @@ saa7111_write_if_changed(struct i2c_client *client, u8 reg, u8 value) } } -static int -saa7111_write_block (struct i2c_client *client, - const u8 *data, - unsigned int len) +static int saa7111_write_block(struct i2c_client *client, const u8 *data, unsigned int len) { int ret = -1; u8 reg; @@ -127,18 +99,17 @@ saa7111_write_block (struct i2c_client *client, decoder->reg[reg++] = data[1]; len -= 2; data += 2; - } while (len >= 2 && data[0] == reg && - block_len < 32); - if ((ret = i2c_master_send(client, block_data, - block_len)) < 0) + } while (len >= 2 && data[0] == reg && block_len < 32); + ret = i2c_master_send(client, block_data, block_len); + if (ret < 0) break; } } else { /* do some slow I2C emulation kind of thing */ while (len >= 2) { reg = *data++; - if ((ret = saa7111_write(client, reg, - *data++)) < 0) + ret = saa7111_write(client, reg, *data++); + if (ret < 0) break; len -= 2; } @@ -147,16 +118,13 @@ saa7111_write_block (struct i2c_client *client, return ret; } -static int -saa7111_init_decoder (struct i2c_client *client, - struct video_decoder_init *init) +static int saa7111_init_decoder(struct i2c_client *client, + struct video_decoder_init *init) { return saa7111_write_block(client, init->data, init->len); } -static inline int -saa7111_read (struct i2c_client *client, - u8 reg) +static inline int saa7111_read(struct i2c_client *client, u8 reg) { return i2c_smbus_read_byte_data(client, reg); } @@ -203,28 +171,23 @@ static const unsigned char saa7111_i2c_init[] = { 0x17, 0x00, /* 17 - VBI */ }; -static int -saa7111_command (struct i2c_client *client, - unsigned int cmd, - void *arg) +static int saa7111_command(struct i2c_client *client, unsigned cmd, void *arg) { struct saa7111 *decoder = i2c_get_clientdata(client); switch (cmd) { - case 0: break; case DECODER_INIT: { struct video_decoder_init *init = arg; + struct video_decoder_init vdi; + if (NULL != init) return saa7111_init_decoder(client, init); - else { - struct video_decoder_init vdi; - vdi.data = saa7111_i2c_init; - vdi.len = sizeof(saa7111_i2c_init); - return saa7111_init_decoder(client, &vdi); - } + vdi.data = saa7111_i2c_init; + vdi.len = sizeof(saa7111_i2c_init); + return saa7111_init_decoder(client, &vdi); } case DECODER_DUMP: @@ -234,15 +197,15 @@ saa7111_command (struct i2c_client *client, for (i = 0; i < SAA7111_NR_REG; i += 16) { int j; - printk(KERN_DEBUG "%s: %03x", I2C_NAME(client), i); + v4l_info(client, "%03x", i); for (j = 0; j < 16 && i + j < SAA7111_NR_REG; ++j) { - printk(" %02x", + printk(KERN_CONT " %02x", saa7111_read(client, i + j)); } - printk("\n"); + printk(KERN_CONT "\n"); } - } break; + } case DECODER_GET_CAPABILITIES: { @@ -255,8 +218,8 @@ saa7111_command (struct i2c_client *client, VIDEO_DECODER_CCIR; cap->inputs = 8; cap->outputs = 1; - } break; + } case DECODER_GET_STATUS: { @@ -265,8 +228,7 @@ saa7111_command (struct i2c_client *client, int res; status = saa7111_read(client, 0x1f); - dprintk(1, KERN_DEBUG "%s status: 0x%02x\n", I2C_NAME(client), - status); + v4l_dbg(1, debug, client, "status: 0x%02x\n", status); res = 0; if ((status & (1 << 6)) == 0) { res |= DECODER_STATUS_GOOD; @@ -294,8 +256,8 @@ saa7111_command (struct i2c_client *client, res |= DECODER_STATUS_COLOR; } *iarg = res; - } break; + } case DECODER_SET_GPIO: { @@ -362,8 +324,8 @@ saa7111_command (struct i2c_client *client, } decoder->norm = *iarg; - } break; + } case DECODER_SET_INPUT: { @@ -387,8 +349,8 @@ saa7111_command (struct i2c_client *client, 3) ? 0x80 : 0)); } - } break; + } case DECODER_SET_OUTPUT: { @@ -398,8 +360,8 @@ saa7111_command (struct i2c_client *client, if (*iarg != 0) { return -EINVAL; } - } break; + } case DECODER_ENABLE_OUTPUT: { @@ -439,8 +401,8 @@ saa7111_command (struct i2c_client *client, (decoder->reg[0x11] & 0xf3)); } } - } break; + } case DECODER_SET_PICTURE: { @@ -454,8 +416,8 @@ saa7111_command (struct i2c_client *client, saa7111_write(client, 0x0c, pic->colour >> 9); /* We want -128 to 127 we get 0-65535 */ saa7111_write(client, 0x0d, (pic->hue - 32768) >> 8); - } break; + } default: return -EINVAL; @@ -466,48 +428,23 @@ saa7111_command (struct i2c_client *client, /* ----------------------------------------------------------------------- */ -/* - * Generic i2c probe - * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' - */ -static unsigned short normal_i2c[] = { I2C_SAA7111 >> 1, I2C_CLIENT_END }; - -static unsigned short ignore = I2C_CLIENT_END; - -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_i2c, - .probe = &ignore, - .ignore = &ignore, -}; +static unsigned short normal_i2c[] = { 0x48 >> 1, I2C_CLIENT_END }; -static struct i2c_driver i2c_driver_saa7111; +I2C_CLIENT_INSMOD; -static int -saa7111_detect_client (struct i2c_adapter *adapter, - int address, - int kind) +static int saa7111_probe(struct i2c_client *client, + const struct i2c_device_id *id) { int i; - struct i2c_client *client; struct saa7111 *decoder; struct video_decoder_init vdi; - dprintk(1, - KERN_INFO - "saa7111.c: detecting saa7111 client on address 0x%x\n", - address << 1); - /* Check if the adapter supports the needed features */ - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return 0; + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) - return -ENOMEM; - client->addr = address; - client->adapter = adapter; - client->driver = &i2c_driver_saa7111; - strlcpy(I2C_NAME(client), "saa7111", sizeof(I2C_NAME(client))); + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); decoder = kzalloc(sizeof(struct saa7111), GFP_KERNEL); if (decoder == NULL) { @@ -519,82 +456,37 @@ saa7111_detect_client (struct i2c_adapter *adapter, decoder->enable = 1; i2c_set_clientdata(client, decoder); - i = i2c_attach_client(client); - if (i) { - kfree(client); - kfree(decoder); - return i; - } - vdi.data = saa7111_i2c_init; vdi.len = sizeof(saa7111_i2c_init); i = saa7111_init_decoder(client, &vdi); if (i < 0) { - dprintk(1, KERN_ERR "%s_attach error: init status %d\n", - I2C_NAME(client), i); + v4l_dbg(1, debug, client, "init status %d\n", i); } else { - dprintk(1, - KERN_INFO - "%s_attach: chip version %x at address 0x%x\n", - I2C_NAME(client), saa7111_read(client, 0x00) >> 4, - client->addr << 1); + v4l_dbg(1, debug, client, "revision %x\n", + saa7111_read(client, 0x00) >> 4); } - return 0; } -static int -saa7111_attach_adapter (struct i2c_adapter *adapter) +static int saa7111_remove(struct i2c_client *client) { - dprintk(1, - KERN_INFO - "saa7111.c: starting probe for adapter %s (0x%x)\n", - I2C_NAME(adapter), adapter->id); - return i2c_probe(adapter, &addr_data, &saa7111_detect_client); -} - -static int -saa7111_detach_client (struct i2c_client *client) -{ - struct saa7111 *decoder = i2c_get_clientdata(client); - int err; - - err = i2c_detach_client(client); - if (err) { - return err; - } - - kfree(decoder); - kfree(client); - + kfree(i2c_get_clientdata(client)); return 0; } /* ----------------------------------------------------------------------- */ -static struct i2c_driver i2c_driver_saa7111 = { - .driver = { - .name = "saa7111", - }, - - .id = I2C_DRIVERID_SAA7111A, +static const struct i2c_device_id saa7111_id[] = { + { "saa7111_old", 0 }, /* "saa7111" maps to the saa7115 driver */ + { } +}; +MODULE_DEVICE_TABLE(i2c, saa7111_id); - .attach_adapter = saa7111_attach_adapter, - .detach_client = saa7111_detach_client, +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "saa7111", + .driverid = I2C_DRIVERID_SAA7111A, .command = saa7111_command, + .probe = saa7111_probe, + .remove = saa7111_remove, + .id_table = saa7111_id, }; - -static int __init -saa7111_init (void) -{ - return i2c_add_driver(&i2c_driver_saa7111); -} - -static void __exit -saa7111_exit (void) -{ - i2c_del_driver(&i2c_driver_saa7111); -} - -module_init(saa7111_init); -module_exit(saa7111_exit); diff --git a/drivers/media/video/saa7114.c b/drivers/media/video/saa7114.c index e79075533beb..7ca709fda5f4 100644 --- a/drivers/media/video/saa7114.c +++ b/drivers/media/video/saa7114.c @@ -29,43 +29,24 @@ */ #include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/major.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/signal.h> #include <linux/types.h> -#include <linux/i2c.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> +#include <linux/ioctl.h> #include <asm/uaccess.h> - +#include <linux/i2c.h> +#include <linux/i2c-id.h> #include <linux/videodev.h> #include <linux/video_decoder.h> +#include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv-legacy.h> MODULE_DESCRIPTION("Philips SAA7114H video decoder driver"); MODULE_AUTHOR("Maxim Yevtyushkin"); MODULE_LICENSE("GPL"); - -#define I2C_NAME(x) (x)->name - - static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); -#define dprintk(num, format, args...) \ - do { \ - if (debug >= num) \ - printk(format, ##args); \ - } while (0) - /* ----------------------------------------------------------------------- */ struct saa7114 { @@ -81,9 +62,6 @@ struct saa7114 { int playback; }; -#define I2C_SAA7114 0x42 -#define I2C_SAA7114A 0x40 - #define I2C_DELAY 10 @@ -129,18 +107,12 @@ struct saa7114 { /* ----------------------------------------------------------------------- */ -static inline int -saa7114_write (struct i2c_client *client, - u8 reg, - u8 value) +static inline int saa7114_write(struct i2c_client *client, u8 reg, u8 value) { return i2c_smbus_write_byte_data(client, reg, value); } -static int -saa7114_write_block (struct i2c_client *client, - const u8 *data, - unsigned int len) +static int saa7114_write_block(struct i2c_client *client, const u8 *data, unsigned int len) { int ret = -1; u8 reg; @@ -160,18 +132,17 @@ saa7114_write_block (struct i2c_client *client, reg++; len -= 2; data += 2; - } while (len >= 2 && data[0] == reg && - block_len < 32); - if ((ret = i2c_master_send(client, block_data, - block_len)) < 0) + } while (len >= 2 && data[0] == reg && block_len < 32); + ret = i2c_master_send(client, block_data, block_len); + if (ret < 0) break; } } else { /* do some slow I2C emulation kind of thing */ while (len >= 2) { reg = *data++; - if ((ret = saa7114_write(client, reg, - *data++)) < 0) + ret = saa7114_write(client, reg, *data++); + if (ret < 0) break; len -= 2; } @@ -180,9 +151,7 @@ saa7114_write_block (struct i2c_client *client, return ret; } -static inline int -saa7114_read (struct i2c_client *client, - u8 reg) +static inline int saa7114_read(struct i2c_client *client, u8 reg) { return i2c_smbus_read_byte_data(client, reg); } @@ -452,15 +421,11 @@ static const unsigned char init[] = { 0xef, 0x00 }; -static int -saa7114_command (struct i2c_client *client, - unsigned int cmd, - void *arg) +static int saa7114_command(struct i2c_client *client, unsigned cmd, void *arg) { struct saa7114 *decoder = i2c_get_clientdata(client); switch (cmd) { - case 0: //dprintk(1, KERN_INFO "%s: writing init\n", I2C_NAME(client)); //saa7114_write_block(client, init, sizeof(init)); @@ -470,27 +435,28 @@ saa7114_command (struct i2c_client *client, { int i; - dprintk(1, KERN_INFO "%s: decoder dump\n", I2C_NAME(client)); + if (!debug) + break; + v4l_info(client, "decoder dump\n"); for (i = 0; i < 32; i += 16) { int j; - printk(KERN_DEBUG "%s: %03x", I2C_NAME(client), i); + v4l_info(client, "%03x", i); for (j = 0; j < 16; ++j) { - printk(" %02x", + printk(KERN_CONT " %02x", saa7114_read(client, i + j)); } - printk("\n"); + printk(KERN_CONT "\n"); } - } break; + } case DECODER_GET_CAPABILITIES: { struct video_decoder_capability *cap = arg; - dprintk(1, KERN_DEBUG "%s: decoder get capabilities\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "get capabilities\n"); cap->flags = VIDEO_DECODER_PAL | VIDEO_DECODER_NTSC | @@ -498,8 +464,8 @@ saa7114_command (struct i2c_client *client, VIDEO_DECODER_CCIR; cap->inputs = 8; cap->outputs = 1; - } break; + } case DECODER_GET_STATUS: { @@ -509,8 +475,7 @@ saa7114_command (struct i2c_client *client, status = saa7114_read(client, 0x1f); - dprintk(1, KERN_DEBUG "%s status: 0x%02x\n", I2C_NAME(client), - status); + v4l_dbg(1, debug, client, "status: 0x%02x\n", status); res = 0; if ((status & (1 << 6)) == 0) { res |= DECODER_STATUS_GOOD; @@ -538,8 +503,8 @@ saa7114_command (struct i2c_client *client, res |= DECODER_STATUS_COLOR; } *iarg = res; - } break; + } case DECODER_SET_NORM: { @@ -547,12 +512,11 @@ saa7114_command (struct i2c_client *client, short int hoff = 0, voff = 0, w = 0, h = 0; - dprintk(1, KERN_DEBUG "%s: decoder set norm ", - I2C_NAME(client)); - switch (*iarg) { + v4l_dbg(1, debug, client, "set norm\n"); + switch (*iarg) { case VIDEO_MODE_NTSC: - dprintk(1, "NTSC\n"); + v4l_dbg(1, debug, client, "NTSC\n"); decoder->reg[REG_ADDR(0x06)] = SAA_7114_NTSC_HSYNC_START; decoder->reg[REG_ADDR(0x07)] = @@ -571,7 +535,7 @@ saa7114_command (struct i2c_client *client, break; case VIDEO_MODE_PAL: - dprintk(1, "PAL\n"); + v4l_dbg(1, debug, client, "PAL\n"); decoder->reg[REG_ADDR(0x06)] = SAA_7114_PAL_HSYNC_START; decoder->reg[REG_ADDR(0x07)] = @@ -590,9 +554,8 @@ saa7114_command (struct i2c_client *client, break; default: - dprintk(1, " Unknown video mode!!!\n"); + v4l_dbg(1, debug, client, "Unknown video mode\n"); return -EINVAL; - } @@ -644,22 +607,20 @@ saa7114_command (struct i2c_client *client, saa7114_write(client, 0x80, 0x36); // i-port and scaler back end clock selection decoder->norm = *iarg; - } break; + } case DECODER_SET_INPUT: { int *iarg = arg; - dprintk(1, KERN_DEBUG "%s: decoder set input (%d)\n", - I2C_NAME(client), *iarg); + v4l_dbg(1, debug, client, "set input (%d)\n", *iarg); if (*iarg < 0 || *iarg > 7) { return -EINVAL; } if (decoder->input != *iarg) { - dprintk(1, KERN_DEBUG "%s: now setting %s input\n", - I2C_NAME(client), + v4l_dbg(1, debug, client, "now setting %s input\n", *iarg >= 6 ? "S-Video" : "Composite"); decoder->input = *iarg; @@ -690,30 +651,29 @@ saa7114_command (struct i2c_client *client, saa7114_write(client, 0x0e, decoder->reg[REG_ADDR(0x0e)]); } - } break; + } case DECODER_SET_OUTPUT: { int *iarg = arg; - dprintk(1, KERN_DEBUG "%s: decoder set output\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "set output\n"); /* not much choice of outputs */ if (*iarg != 0) { return -EINVAL; } - } break; + } case DECODER_ENABLE_OUTPUT: { int *iarg = arg; int enable = (*iarg != 0); - dprintk(1, KERN_DEBUG "%s: decoder %s output\n", - I2C_NAME(client), enable ? "enable" : "disable"); + v4l_dbg(1, debug, client, "%s output\n", + enable ? "enable" : "disable"); decoder->playback = !enable; @@ -754,18 +714,16 @@ saa7114_command (struct i2c_client *client, saa7114_write(client, 0x80, 0x36); } - } break; + } case DECODER_SET_PICTURE: { struct video_picture *pic = arg; - dprintk(1, - KERN_DEBUG - "%s: decoder set picture bright=%d contrast=%d saturation=%d hue=%d\n", - I2C_NAME(client), pic->brightness, pic->contrast, - pic->colour, pic->hue); + v4l_dbg(1, debug, client, + "decoder set picture bright=%d contrast=%d saturation=%d hue=%d\n", + pic->brightness, pic->contrast, pic->colour, pic->hue); if (decoder->bright != pic->brightness) { /* We want 0 to 255 we get 0-65535 */ @@ -789,8 +747,8 @@ saa7114_command (struct i2c_client *client, saa7114_write(client, 0x0d, (decoder->hue - 32768) >> 8); } - } break; + } default: return -EINVAL; @@ -801,58 +759,30 @@ saa7114_command (struct i2c_client *client, /* ----------------------------------------------------------------------- */ -/* - * Generic i2c probe - * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' - */ -static unsigned short normal_i2c[] = - { I2C_SAA7114 >> 1, I2C_SAA7114A >> 1, I2C_CLIENT_END }; - -static unsigned short ignore = I2C_CLIENT_END; - -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_i2c, - .probe = &ignore, - .ignore = &ignore, -}; +static unsigned short normal_i2c[] = { 0x42 >> 1, 0x40 >> 1, I2C_CLIENT_END }; -static struct i2c_driver i2c_driver_saa7114; +I2C_CLIENT_INSMOD; -static int -saa7114_detect_client (struct i2c_adapter *adapter, - int address, - int kind) +static int saa7114_probe(struct i2c_client *client, + const struct i2c_device_id *id) { int i, err[30]; short int hoff = SAA_7114_NTSC_HOFFSET; short int voff = SAA_7114_NTSC_VOFFSET; short int w = SAA_7114_NTSC_WIDTH; short int h = SAA_7114_NTSC_HEIGHT; - struct i2c_client *client; struct saa7114 *decoder; - dprintk(1, - KERN_INFO - "saa7114.c: detecting saa7114 client on address 0x%x\n", - address << 1); - /* Check if the adapter supports the needed features */ - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return 0; + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) - return -ENOMEM; - client->addr = address; - client->adapter = adapter; - client->driver = &i2c_driver_saa7114; - strlcpy(I2C_NAME(client), "saa7114", sizeof(I2C_NAME(client))); + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); decoder = kzalloc(sizeof(struct saa7114), GFP_KERNEL); - if (decoder == NULL) { - kfree(client); + if (decoder == NULL) return -ENOMEM; - } decoder->norm = VIDEO_MODE_NTSC; decoder->input = -1; decoder->enable = 1; @@ -937,8 +867,7 @@ saa7114_detect_client (struct i2c_adapter *adapter, decoder->reg[REG_ADDR(0x0e)] |= 1; // combfilter on - dprintk(1, KERN_DEBUG "%s_attach: starting decoder init\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "starting init\n"); err[0] = saa7114_write_block(client, decoder->reg + (0x20 << 1), @@ -962,28 +891,23 @@ saa7114_detect_client (struct i2c_adapter *adapter, for (i = 0; i <= 5; i++) { if (err[i] < 0) { - dprintk(1, - KERN_ERR - "%s_attach: init error %d at stage %d, leaving attach.\n", - I2C_NAME(client), i, err[i]); + v4l_dbg(1, debug, client, + "init error %d at stage %d, leaving attach.\n", + i, err[i]); kfree(decoder); - kfree(client); - return 0; + return -EIO; } } for (i = 6; i < 8; i++) { - dprintk(1, - KERN_DEBUG - "%s_attach: reg[0x%02x] = 0x%02x (0x%02x)\n", - I2C_NAME(client), i, saa7114_read(client, i), + v4l_dbg(1, debug, client, + "reg[0x%02x] = 0x%02x (0x%02x)\n", + i, saa7114_read(client, i), decoder->reg[REG_ADDR(i)]); } - dprintk(1, - KERN_DEBUG - "%s_attach: performing decoder reset sequence\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, + "performing decoder reset sequence\n"); err[6] = saa7114_write(client, 0x80, 0x06); // i-port and scaler backend clock selection, task A&B off err[7] = saa7114_write(client, 0x88, 0xd8); // sw reset scaler @@ -991,19 +915,15 @@ saa7114_detect_client (struct i2c_adapter *adapter, for (i = 6; i <= 8; i++) { if (err[i] < 0) { - dprintk(1, - KERN_ERR - "%s_attach: init error %d at stage %d, leaving attach.\n", - I2C_NAME(client), i, err[i]); + v4l_dbg(1, debug, client, + "init error %d at stage %d, leaving attach.\n", + i, err[i]); kfree(decoder); - kfree(client); - return 0; + return -EIO; } } - dprintk(1, KERN_INFO "%s_attach: performing the rest of init\n", - I2C_NAME(client)); - + v4l_dbg(1, debug, client, "performing the rest of init\n"); err[9] = saa7114_write(client, 0x01, decoder->reg[REG_ADDR(0x01)]); err[10] = saa7114_write_block(client, decoder->reg + (0x03 << 1), (0x1e + 1 - 0x03) << 1); // big seq @@ -1039,37 +959,32 @@ saa7114_detect_client (struct i2c_adapter *adapter, for (i = 9; i <= 18; i++) { if (err[i] < 0) { - dprintk(1, - KERN_ERR - "%s_attach: init error %d at stage %d, leaving attach.\n", - I2C_NAME(client), i, err[i]); + v4l_dbg(1, debug, client, + "init error %d at stage %d, leaving attach.\n", + i, err[i]); kfree(decoder); - kfree(client); - return 0; + return -EIO; } } for (i = 6; i < 8; i++) { - dprintk(1, - KERN_DEBUG - "%s_attach: reg[0x%02x] = 0x%02x (0x%02x)\n", - I2C_NAME(client), i, saa7114_read(client, i), + v4l_dbg(1, debug, client, + "reg[0x%02x] = 0x%02x (0x%02x)\n", + i, saa7114_read(client, i), decoder->reg[REG_ADDR(i)]); } for (i = 0x11; i <= 0x13; i++) { - dprintk(1, - KERN_DEBUG - "%s_attach: reg[0x%02x] = 0x%02x (0x%02x)\n", - I2C_NAME(client), i, saa7114_read(client, i), + v4l_dbg(1, debug, client, + "reg[0x%02x] = 0x%02x (0x%02x)\n", + i, saa7114_read(client, i), decoder->reg[REG_ADDR(i)]); } - dprintk(1, KERN_DEBUG "%s_attach: setting video input\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "setting video input\n"); err[19] = saa7114_write(client, 0x02, decoder->reg[REG_ADDR(0x02)]); @@ -1080,20 +995,15 @@ saa7114_detect_client (struct i2c_adapter *adapter, for (i = 19; i <= 21; i++) { if (err[i] < 0) { - dprintk(1, - KERN_ERR - "%s_attach: init error %d at stage %d, leaving attach.\n", - I2C_NAME(client), i, err[i]); + v4l_dbg(1, debug, client, + "init error %d at stage %d, leaving attach.\n", + i, err[i]); kfree(decoder); - kfree(client); - return 0; + return -EIO; } } - dprintk(1, - KERN_DEBUG - "%s_attach: performing decoder reset sequence\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "performing decoder reset sequence\n"); err[22] = saa7114_write(client, 0x88, 0xd8); // sw reset scaler err[23] = saa7114_write(client, 0x88, 0xf8); // sw reset scaler release @@ -1102,13 +1012,11 @@ saa7114_detect_client (struct i2c_adapter *adapter, for (i = 22; i <= 24; i++) { if (err[i] < 0) { - dprintk(1, - KERN_ERR - "%s_attach: init error %d at stage %d, leaving attach.\n", - I2C_NAME(client), i, err[i]); + v4l_dbg(1, debug, client, + "init error %d at stage %d, leaving attach.\n", + i, err[i]); kfree(decoder); - kfree(client); - return 0; + return -EIO; } } @@ -1116,101 +1024,45 @@ saa7114_detect_client (struct i2c_adapter *adapter, err[26] = saa7114_write(client, 0x07, init[REG_ADDR(0x07)]); err[27] = saa7114_write(client, 0x10, init[REG_ADDR(0x10)]); - dprintk(1, - KERN_INFO - "%s_attach: chip version %x, decoder status 0x%02x\n", - I2C_NAME(client), saa7114_read(client, 0x00) >> 4, + v4l_dbg(1, debug, client, "chip version %x, decoder status 0x%02x\n", + saa7114_read(client, 0x00) >> 4, saa7114_read(client, 0x1f)); - dprintk(1, - KERN_DEBUG - "%s_attach: power save control: 0x%02x, scaler status: 0x%02x\n", - I2C_NAME(client), saa7114_read(client, 0x88), + v4l_dbg(1, debug, client, + "power save control: 0x%02x, scaler status: 0x%02x\n", + saa7114_read(client, 0x88), saa7114_read(client, 0x8f)); for (i = 0x94; i < 0x96; i++) { - dprintk(1, - KERN_DEBUG - "%s_attach: reg[0x%02x] = 0x%02x (0x%02x)\n", - I2C_NAME(client), i, saa7114_read(client, i), + v4l_dbg(1, debug, client, + "reg[0x%02x] = 0x%02x (0x%02x)\n", + i, saa7114_read(client, i), decoder->reg[REG_ADDR(i)]); } - i = i2c_attach_client(client); - if (i) { - kfree(client); - kfree(decoder); - return i; - } - //i = saa7114_write_block(client, init, sizeof(init)); - i = 0; - if (i < 0) { - dprintk(1, KERN_ERR "%s_attach error: init status %d\n", - I2C_NAME(client), i); - } else { - dprintk(1, - KERN_INFO - "%s_attach: chip version %x at address 0x%x\n", - I2C_NAME(client), saa7114_read(client, 0x00) >> 4, - client->addr << 1); - } - return 0; } -static int -saa7114_attach_adapter (struct i2c_adapter *adapter) -{ - dprintk(1, - KERN_INFO - "saa7114.c: starting probe for adapter %s (0x%x)\n", - I2C_NAME(adapter), adapter->id); - return i2c_probe(adapter, &addr_data, &saa7114_detect_client); -} - -static int -saa7114_detach_client (struct i2c_client *client) +static int saa7114_remove(struct i2c_client *client) { - struct saa7114 *decoder = i2c_get_clientdata(client); - int err; - - err = i2c_detach_client(client); - if (err) { - return err; - } - - kfree(decoder); - kfree(client); - + kfree(i2c_get_clientdata(client)); return 0; } /* ----------------------------------------------------------------------- */ -static struct i2c_driver i2c_driver_saa7114 = { - .driver = { - .name = "saa7114", - }, - - .id = I2C_DRIVERID_SAA7114, +static const struct i2c_device_id saa7114_id[] = { + { "saa7114_old", 0 }, /* "saa7114" maps to the saa7115 driver */ + { } +}; +MODULE_DEVICE_TABLE(i2c, saa7114_id); - .attach_adapter = saa7114_attach_adapter, - .detach_client = saa7114_detach_client, +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "saa7114", + .driverid = I2C_DRIVERID_SAA7114, .command = saa7114_command, + .probe = saa7114_probe, + .remove = saa7114_remove, + .id_table = saa7114_id, }; - -static int __init -saa7114_init (void) -{ - return i2c_add_driver(&i2c_driver_saa7114); -} - -static void __exit -saa7114_exit (void) -{ - i2c_del_driver(&i2c_driver_saa7114); -} - -module_init(saa7114_init); -module_exit(saa7114_exit); diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c index d0e83fe0ff51..cc02fb18efa7 100644 --- a/drivers/media/video/saa7127.c +++ b/drivers/media/video/saa7127.c @@ -29,7 +29,7 @@ * Note: the saa7126 is identical to the saa7127, and the saa7128 is * identical to the saa7129, except that the saa7126 and saa7128 have * macrovision anti-taping support. This driver will almost certainly - * work find for those chips, except of course for the missing anti-taping + * work fine for those chips, except of course for the missing anti-taping * support. * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 87c10983266f..8c46115d4c79 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -535,11 +535,16 @@ static int configure_tda827x_fe(struct saa7134_dev *dev, struct tda1004x_config *cdec_conf, struct tda827x_config *tuner_conf) { - dev->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap); - if (dev->dvb.frontend) { + struct videobuf_dvb_frontend *fe0; + + /* Get the first frontend */ + fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); + + fe0->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap); + if (fe0->dvb.frontend) { if (cdec_conf->i2c_gate) - dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl; - if (dvb_attach(tda827x_attach, dev->dvb.frontend, + fe0->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl; + if (dvb_attach(tda827x_attach, fe0->dvb.frontend, cdec_conf->tuner_address, &dev->i2c_adap, tuner_conf)) return 0; @@ -944,12 +949,30 @@ static int dvb_init(struct saa7134_dev *dev) { int ret; int attach_xc3028 = 0; + struct videobuf_dvb_frontend *fe0; + + /* FIXME: add support for multi-frontend */ + mutex_init(&dev->frontends.lock); + INIT_LIST_HEAD(&dev->frontends.felist); + dev->frontends.active_fe_id = 0; + + printk(KERN_INFO "%s() allocating 1 frontend\n", __func__); + + if (videobuf_dvb_alloc_frontend(&dev->frontends, 1) == NULL) { + printk(KERN_ERR "%s() failed to alloc\n", __func__); + return -ENOMEM; + } + + /* Get the first frontend */ + fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); + if (!fe0) + return -EINVAL; /* init struct videobuf_dvb */ dev->ts.nr_bufs = 32; dev->ts.nr_packets = 32*4; - dev->dvb.name = dev->name; - videobuf_queue_sg_init(&dev->dvb.dvbq, &saa7134_ts_qops, + fe0->dvb.name = dev->name; + videobuf_queue_sg_init(&fe0->dvb.dvbq, &saa7134_ts_qops, &dev->pci->dev, &dev->slock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_ALTERNATE, @@ -959,47 +982,47 @@ static int dvb_init(struct saa7134_dev *dev) switch (dev->board) { case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL: dprintk("pinnacle 300i dvb setup\n"); - dev->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i, + fe0->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i, &dev->i2c_adap); - if (dev->dvb.frontend) { - dev->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params; + if (fe0->dvb.frontend) { + fe0->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params; } break; case SAA7134_BOARD_AVERMEDIA_777: case SAA7134_BOARD_AVERMEDIA_A16AR: dprintk("avertv 777 dvb setup\n"); - dev->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777, + fe0->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777, &dev->i2c_adap); - if (dev->dvb.frontend) { - dvb_attach(simple_tuner_attach, dev->dvb.frontend, + if (fe0->dvb.frontend) { + dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &dev->i2c_adap, 0x61, TUNER_PHILIPS_TD1316); } break; case SAA7134_BOARD_AVERMEDIA_A16D: dprintk("AverMedia A16D dvb setup\n"); - dev->dvb.frontend = dvb_attach(mt352_attach, + fe0->dvb.frontend = dvb_attach(mt352_attach, &avermedia_xc3028_mt352_dev, &dev->i2c_adap); attach_xc3028 = 1; break; case SAA7134_BOARD_MD7134: - dev->dvb.frontend = dvb_attach(tda10046_attach, + fe0->dvb.frontend = dvb_attach(tda10046_attach, &medion_cardbus, &dev->i2c_adap); - if (dev->dvb.frontend) { - dvb_attach(simple_tuner_attach, dev->dvb.frontend, + if (fe0->dvb.frontend) { + dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &dev->i2c_adap, medion_cardbus.tuner_address, TUNER_PHILIPS_FMD1216ME_MK3); } break; case SAA7134_BOARD_PHILIPS_TOUGH: - dev->dvb.frontend = dvb_attach(tda10046_attach, + fe0->dvb.frontend = dvb_attach(tda10046_attach, &philips_tu1216_60_config, &dev->i2c_adap); - if (dev->dvb.frontend) { - dev->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init; - dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set; + if (fe0->dvb.frontend) { + fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init; + fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set; } break; case SAA7134_BOARD_FLYDVBTDUO: @@ -1010,24 +1033,24 @@ static int dvb_init(struct saa7134_dev *dev) break; case SAA7134_BOARD_PHILIPS_EUROPA: case SAA7134_BOARD_VIDEOMATE_DVBT_300: - dev->dvb.frontend = dvb_attach(tda10046_attach, + fe0->dvb.frontend = dvb_attach(tda10046_attach, &philips_europa_config, &dev->i2c_adap); - if (dev->dvb.frontend) { - dev->original_demod_sleep = dev->dvb.frontend->ops.sleep; - dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep; - dev->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init; - dev->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep; - dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; + if (fe0->dvb.frontend) { + dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep; + fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep; + fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init; + fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep; + fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; } break; case SAA7134_BOARD_VIDEOMATE_DVBT_200: - dev->dvb.frontend = dvb_attach(tda10046_attach, + fe0->dvb.frontend = dvb_attach(tda10046_attach, &philips_tu1216_61_config, &dev->i2c_adap); - if (dev->dvb.frontend) { - dev->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init; - dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set; + if (fe0->dvb.frontend) { + fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init; + fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set; } break; case SAA7134_BOARD_KWORLD_DVBT_210: @@ -1066,14 +1089,14 @@ static int dvb_init(struct saa7134_dev *dev) &tda827x_cfg_0) < 0) goto dettach_frontend; } else { /* satellite */ - dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); - if (dev->dvb.frontend) { - if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x63, + fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); + if (fe0->dvb.frontend) { + if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x63, &dev->i2c_adap, 0) == NULL) { wprintk("%s: Lifeview Trio, No tda826x found!\n", __func__); goto dettach_frontend; } - if (dvb_attach(isl6421_attach, dev->dvb.frontend, &dev->i2c_adap, + if (dvb_attach(isl6421_attach, fe0->dvb.frontend, &dev->i2c_adap, 0x08, 0, 0) == NULL) { wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __func__); goto dettach_frontend; @@ -1083,11 +1106,11 @@ static int dvb_init(struct saa7134_dev *dev) break; case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331: case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS: - dev->dvb.frontend = dvb_attach(tda10046_attach, + fe0->dvb.frontend = dvb_attach(tda10046_attach, &ads_tech_duo_config, &dev->i2c_adap); - if (dev->dvb.frontend) { - if (dvb_attach(tda827x_attach,dev->dvb.frontend, + if (fe0->dvb.frontend) { + if (dvb_attach(tda827x_attach,fe0->dvb.frontend, ads_tech_duo_config.tuner_address, &dev->i2c_adap, &ads_duo_cfg) == NULL) { wprintk("no tda827x tuner found at addr: %02x\n", @@ -1108,15 +1131,15 @@ static int dvb_init(struct saa7134_dev *dev) &tda827x_cfg_0) < 0) goto dettach_frontend; } else { /* satellite */ - dev->dvb.frontend = dvb_attach(tda10086_attach, + fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); - if (dev->dvb.frontend) { - struct dvb_frontend *fe = dev->dvb.frontend; + if (fe0->dvb.frontend) { + struct dvb_frontend *fe = fe0->dvb.frontend; u8 dev_id = dev->eedata[2]; u8 data = 0xc4; struct i2c_msg msg = {.addr = 0x08, .flags = 0, .len = 1}; - if (dvb_attach(tda826x_attach, dev->dvb.frontend, + if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60, &dev->i2c_adap, 0) == NULL) { wprintk("%s: Medion Quadro, no tda826x " "found !\n", __func__); @@ -1150,31 +1173,31 @@ static int dvb_init(struct saa7134_dev *dev) } break; case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180: - dev->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180, + fe0->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180, &dev->i2c_adap); - if (dev->dvb.frontend) - dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, + if (fe0->dvb.frontend) + dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61, NULL, DVB_PLL_TDHU2); break; case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI: case SAA7134_BOARD_KWORLD_ATSC110: - dev->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110, + fe0->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110, &dev->i2c_adap); - if (dev->dvb.frontend) - dvb_attach(simple_tuner_attach, dev->dvb.frontend, + if (fe0->dvb.frontend) + dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &dev->i2c_adap, 0x61, TUNER_PHILIPS_TUV1236D); break; case SAA7134_BOARD_FLYDVBS_LR300: - dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, + fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); - if (dev->dvb.frontend) { - if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60, + if (fe0->dvb.frontend) { + if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60, &dev->i2c_adap, 0) == NULL) { wprintk("%s: No tda826x found!\n", __func__); goto dettach_frontend; } - if (dvb_attach(isl6421_attach, dev->dvb.frontend, + if (dvb_attach(isl6421_attach, fe0->dvb.frontend, &dev->i2c_adap, 0x08, 0, 0) == NULL) { wprintk("%s: No ISL6421 found!\n", __func__); goto dettach_frontend; @@ -1182,25 +1205,25 @@ static int dvb_init(struct saa7134_dev *dev) } break; case SAA7134_BOARD_ASUS_EUROPA2_HYBRID: - dev->dvb.frontend = dvb_attach(tda10046_attach, + fe0->dvb.frontend = dvb_attach(tda10046_attach, &medion_cardbus, &dev->i2c_adap); - if (dev->dvb.frontend) { - dev->original_demod_sleep = dev->dvb.frontend->ops.sleep; - dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep; + if (fe0->dvb.frontend) { + dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep; + fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep; - dvb_attach(simple_tuner_attach, dev->dvb.frontend, + dvb_attach(simple_tuner_attach, fe0->dvb.frontend, &dev->i2c_adap, medion_cardbus.tuner_address, TUNER_PHILIPS_FMD1216ME_MK3); } break; case SAA7134_BOARD_VIDEOMATE_DVBT_200A: - dev->dvb.frontend = dvb_attach(tda10046_attach, + fe0->dvb.frontend = dvb_attach(tda10046_attach, &philips_europa_config, &dev->i2c_adap); - if (dev->dvb.frontend) { - dev->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init; - dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; + if (fe0->dvb.frontend) { + fe0->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init; + fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; } break; case SAA7134_BOARD_CINERGY_HT_PCMCIA: @@ -1239,15 +1262,15 @@ static int dvb_init(struct saa7134_dev *dev) goto dettach_frontend; break; case SAA7134_BOARD_PHILIPS_SNAKE: - dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, + fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); - if (dev->dvb.frontend) { - if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60, + if (fe0->dvb.frontend) { + if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60, &dev->i2c_adap, 0) == NULL) { wprintk("%s: No tda826x found!\n", __func__); goto dettach_frontend; } - if (dvb_attach(lnbp21_attach, dev->dvb.frontend, + if (dvb_attach(lnbp21_attach, fe0->dvb.frontend, &dev->i2c_adap, 0, 0) == NULL) { wprintk("%s: No lnbp21 found!\n", __func__); goto dettach_frontend; @@ -1269,24 +1292,24 @@ static int dvb_init(struct saa7134_dev *dev) saa7134_set_gpio(dev, 25, 0); msleep(10); saa7134_set_gpio(dev, 25, 1); - dev->dvb.frontend = dvb_attach(mt352_attach, + fe0->dvb.frontend = dvb_attach(mt352_attach, &avermedia_xc3028_mt352_dev, &dev->i2c_adap); attach_xc3028 = 1; break; case SAA7134_BOARD_MD7134_BRIDGE_2: - dev->dvb.frontend = dvb_attach(tda10086_attach, + fe0->dvb.frontend = dvb_attach(tda10086_attach, &sd1878_4m, &dev->i2c_adap); - if (dev->dvb.frontend) { + if (fe0->dvb.frontend) { struct dvb_frontend *fe; - if (dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x60, + if (dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60, &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) { wprintk("%s: MD7134 DVB-S, no SD1878 " "found !\n", __func__); goto dettach_frontend; } /* we need to open the i2c gate (we know it exists) */ - fe = dev->dvb.frontend; + fe = fe0->dvb.frontend; fe->ops.i2c_gate_ctrl(fe, 1); if (dvb_attach(isl6405_attach, fe, &dev->i2c_adap, 0x08, 0, 0) == NULL) { @@ -1305,7 +1328,7 @@ static int dvb_init(struct saa7134_dev *dev) saa7134_set_gpio(dev, 25, 0); msleep(10); saa7134_set_gpio(dev, 25, 1); - dev->dvb.frontend = dvb_attach(mt352_attach, + fe0->dvb.frontend = dvb_attach(mt352_attach, &avermedia_xc3028_mt352_dev, &dev->i2c_adap); attach_xc3028 = 1; @@ -1316,17 +1339,17 @@ static int dvb_init(struct saa7134_dev *dev) &tda827x_cfg_2) < 0) goto dettach_frontend; } else { /* satellite */ - dev->dvb.frontend = dvb_attach(tda10086_attach, + fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); - if (dev->dvb.frontend) { + if (fe0->dvb.frontend) { if (dvb_attach(tda826x_attach, - dev->dvb.frontend, 0x60, + fe0->dvb.frontend, 0x60, &dev->i2c_adap, 0) == NULL) { wprintk("%s: Asus Tiger 3in1, no " "tda826x found!\n", __func__); goto dettach_frontend; } - if (dvb_attach(lnbp21_attach, dev->dvb.frontend, + if (dvb_attach(lnbp21_attach, fe0->dvb.frontend, &dev->i2c_adap, 0, 0) == NULL) { wprintk("%s: Asus Tiger 3in1, no lnbp21" " found!\n", __func__); @@ -1352,10 +1375,10 @@ static int dvb_init(struct saa7134_dev *dev) .i2c_addr = 0x61, }; - if (!dev->dvb.frontend) + if (!fe0->dvb.frontend) return -1; - fe = dvb_attach(xc2028_attach, dev->dvb.frontend, &cfg); + fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg); if (!fe) { printk(KERN_ERR "%s/2: xc3028 attach failed\n", dev->name); @@ -1363,40 +1386,47 @@ static int dvb_init(struct saa7134_dev *dev) } } - if (NULL == dev->dvb.frontend) { + if (NULL == fe0->dvb.frontend) { printk(KERN_ERR "%s/dvb: frontend initialization failed\n", dev->name); return -1; } /* define general-purpose callback pointer */ - dev->dvb.frontend->callback = saa7134_tuner_callback; + fe0->dvb.frontend->callback = saa7134_tuner_callback; /* register everything else */ - ret = videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev, &dev->pci->dev, - adapter_nr); + ret = videobuf_dvb_register_bus(&dev->frontends, THIS_MODULE, dev, + &dev->pci->dev, adapter_nr, 0); /* this sequence is necessary to make the tda1004x load its firmware * and to enter analog mode of hybrid boards */ if (!ret) { - if (dev->dvb.frontend->ops.init) - dev->dvb.frontend->ops.init(dev->dvb.frontend); - if (dev->dvb.frontend->ops.sleep) - dev->dvb.frontend->ops.sleep(dev->dvb.frontend); - if (dev->dvb.frontend->ops.tuner_ops.sleep) - dev->dvb.frontend->ops.tuner_ops.sleep(dev->dvb.frontend); + if (fe0->dvb.frontend->ops.init) + fe0->dvb.frontend->ops.init(fe0->dvb.frontend); + if (fe0->dvb.frontend->ops.sleep) + fe0->dvb.frontend->ops.sleep(fe0->dvb.frontend); + if (fe0->dvb.frontend->ops.tuner_ops.sleep) + fe0->dvb.frontend->ops.tuner_ops.sleep(fe0->dvb.frontend); } return ret; dettach_frontend: - if (dev->dvb.frontend) - dvb_frontend_detach(dev->dvb.frontend); - dev->dvb.frontend = NULL; + if (fe0->dvb.frontend) + dvb_frontend_detach(fe0->dvb.frontend); + fe0->dvb.frontend = NULL; return -1; } static int dvb_fini(struct saa7134_dev *dev) { + struct videobuf_dvb_frontend *fe0; + + /* Get the first frontend */ + fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); + if (!fe0) + return -EINVAL; + /* FIXME: I suspect that this code is bogus, since the entry for Pinnacle 300I DVB-T PAL already defines the proper init to allow the detection of mt2032 (TDA9887_PORT2_INACTIVE) @@ -1416,7 +1446,7 @@ static int dvb_fini(struct saa7134_dev *dev) u8 data = 0x80; struct i2c_msg msg = {.addr = 0x08, .buf = &data, .flags = 0, .len = 1}; struct dvb_frontend *fe; - fe = dev->dvb.frontend; + fe = fe0->dvb.frontend; if (fe->ops.i2c_gate_ctrl) { fe->ops.i2c_gate_ctrl(fe, 1); i2c_transfer(&dev->i2c_adap, &msg, 1); @@ -1424,8 +1454,8 @@ static int dvb_fini(struct saa7134_dev *dev) } } } - if (dev->dvb.frontend) - videobuf_dvb_unregister(&dev->dvb); + if (fe0->dvb.frontend) + videobuf_dvb_unregister_bus(&dev->frontends); return 0; } diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 491ab1f8fdd3..24096d6e1ef8 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -581,7 +581,7 @@ struct saa7134_dev { #if defined(CONFIG_VIDEO_SAA7134_DVB) || defined(CONFIG_VIDEO_SAA7134_DVB_MODULE) /* SAA7134_MPEG_DVB only */ - struct videobuf_dvb dvb; + struct videobuf_dvb_frontends frontends; int (*original_demod_sleep)(struct dvb_frontend *fe); int (*original_set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage); int (*original_set_high_voltage)(struct dvb_frontend *fe, long arg); diff --git a/drivers/media/video/saa7185.c b/drivers/media/video/saa7185.c index 02fda4eecea3..6debb65152ee 100644 --- a/drivers/media/video/saa7185.c +++ b/drivers/media/video/saa7185.c @@ -25,43 +25,25 @@ */ #include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/major.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/signal.h> #include <linux/types.h> -#include <linux/i2c.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> +#include <linux/ioctl.h> #include <asm/uaccess.h> - +#include <linux/i2c.h> +#include <linux/i2c-id.h> #include <linux/videodev.h> #include <linux/video_encoder.h> +#include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv-legacy.h> MODULE_DESCRIPTION("Philips SAA7185 video encoder driver"); MODULE_AUTHOR("Dave Perks"); MODULE_LICENSE("GPL"); -#define I2C_NAME(s) (s)->name - - static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); -#define dprintk(num, format, args...) \ - do { \ - if (debug >= num) \ - printk(format, ##args); \ - } while (0) - /* ----------------------------------------------------------------------- */ struct saa7185 { @@ -75,32 +57,24 @@ struct saa7185 { int sat; }; -#define I2C_SAA7185 0x88 - /* ----------------------------------------------------------------------- */ -static inline int -saa7185_read (struct i2c_client *client) +static inline int saa7185_read(struct i2c_client *client) { return i2c_smbus_read_byte(client); } -static int -saa7185_write (struct i2c_client *client, - u8 reg, - u8 value) +static int saa7185_write(struct i2c_client *client, u8 reg, u8 value) { struct saa7185 *encoder = i2c_get_clientdata(client); - dprintk(1, KERN_DEBUG "SAA7185: %02x set to %02x\n", reg, value); + v4l_dbg(1, debug, client, "%02x set to %02x\n", reg, value); encoder->reg[reg] = value; return i2c_smbus_write_byte_data(client, reg, value); } -static int -saa7185_write_block (struct i2c_client *client, - const u8 *data, - unsigned int len) +static int saa7185_write_block(struct i2c_client *client, + const u8 *data, unsigned int len) { int ret = -1; u8 reg; @@ -121,18 +95,17 @@ saa7185_write_block (struct i2c_client *client, encoder->reg[reg++] = data[1]; len -= 2; data += 2; - } while (len >= 2 && data[0] == reg && - block_len < 32); - if ((ret = i2c_master_send(client, block_data, - block_len)) < 0) + } while (len >= 2 && data[0] == reg && block_len < 32); + ret = i2c_master_send(client, block_data, block_len); + if (ret < 0) break; } } else { /* do some slow I2C emulation kind of thing */ while (len >= 2) { reg = *data++; - if ((ret = saa7185_write(client, reg, - *data++)) < 0) + ret = saa7185_write(client, reg, *data++); + if (ret < 0) break; len -= 2; } @@ -240,15 +213,11 @@ static const unsigned char init_ntsc[] = { 0x66, 0x21, /* FSC3 */ }; -static int -saa7185_command (struct i2c_client *client, - unsigned int cmd, - void *arg) +static int saa7185_command(struct i2c_client *client, unsigned cmd, void *arg) { struct saa7185 *encoder = i2c_get_clientdata(client); switch (cmd) { - case 0: saa7185_write_block(client, init_common, sizeof(init_common)); @@ -264,7 +233,6 @@ saa7185_command (struct i2c_client *client, sizeof(init_pal)); break; } - break; case ENCODER_GET_CAPABILITIES: @@ -276,8 +244,8 @@ saa7185_command (struct i2c_client *client, VIDEO_ENCODER_SECAM | VIDEO_ENCODER_CCIR; cap->inputs = 1; cap->outputs = 1; - } break; + } case ENCODER_SET_NORM: { @@ -286,7 +254,6 @@ saa7185_command (struct i2c_client *client, //saa7185_write_block(client, init_common, sizeof(init_common)); switch (*iarg) { - case VIDEO_MODE_NTSC: saa7185_write_block(client, init_ntsc, sizeof(init_ntsc)); @@ -300,11 +267,10 @@ saa7185_command (struct i2c_client *client, case VIDEO_MODE_SECAM: default: return -EINVAL; - } encoder->norm = *iarg; - } break; + } case ENCODER_SET_INPUT: { @@ -314,7 +280,6 @@ saa7185_command (struct i2c_client *client, *iarg = 1: input is from ZR36060 */ switch (*iarg) { - case 0: /* Switch RTCE to 1 */ saa7185_write(client, 0x61, @@ -332,21 +297,19 @@ saa7185_command (struct i2c_client *client, default: return -EINVAL; - } - } break; + } case ENCODER_SET_OUTPUT: { int *iarg = arg; /* not much choice of outputs */ - if (*iarg != 0) { + if (*iarg != 0) return -EINVAL; - } - } break; + } case ENCODER_ENABLE_OUTPUT: { @@ -356,8 +319,8 @@ saa7185_command (struct i2c_client *client, saa7185_write(client, 0x61, (encoder->reg[0x61] & 0xbf) | (encoder->enable ? 0x00 : 0x40)); - } break; + } default: return -EINVAL; @@ -368,138 +331,65 @@ saa7185_command (struct i2c_client *client, /* ----------------------------------------------------------------------- */ -/* - * Generic i2c probe - * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' - */ -static unsigned short normal_i2c[] = { I2C_SAA7185 >> 1, I2C_CLIENT_END }; +static unsigned short normal_i2c[] = { 0x88 >> 1, I2C_CLIENT_END }; -static unsigned short ignore = I2C_CLIENT_END; +I2C_CLIENT_INSMOD; -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_i2c, - .probe = &ignore, - .ignore = &ignore, -}; - -static struct i2c_driver i2c_driver_saa7185; - -static int -saa7185_detect_client (struct i2c_adapter *adapter, - int address, - int kind) +static int saa7185_probe(struct i2c_client *client, + const struct i2c_device_id *id) { int i; - struct i2c_client *client; struct saa7185 *encoder; - dprintk(1, - KERN_INFO - "saa7185.c: detecting saa7185 client on address 0x%x\n", - address << 1); - /* Check if the adapter supports the needed features */ - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return 0; + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!client) - return -ENOMEM; - client->addr = address; - client->adapter = adapter; - client->driver = &i2c_driver_saa7185; - strlcpy(I2C_NAME(client), "saa7185", sizeof(I2C_NAME(client))); + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); encoder = kzalloc(sizeof(struct saa7185), GFP_KERNEL); - if (encoder == NULL) { - kfree(client); + if (encoder == NULL) return -ENOMEM; - } encoder->norm = VIDEO_MODE_NTSC; encoder->enable = 1; i2c_set_clientdata(client, encoder); - i = i2c_attach_client(client); - if (i) { - kfree(client); - kfree(encoder); - return i; - } - i = saa7185_write_block(client, init_common, sizeof(init_common)); - if (i >= 0) { - i = saa7185_write_block(client, init_ntsc, - sizeof(init_ntsc)); - } - if (i < 0) { - dprintk(1, KERN_ERR "%s_attach: init error %d\n", - I2C_NAME(client), i); - } else { - dprintk(1, - KERN_INFO - "%s_attach: chip version %d at address 0x%x\n", - I2C_NAME(client), saa7185_read(client) >> 5, - client->addr << 1); - } - + if (i >= 0) + i = saa7185_write_block(client, init_ntsc, sizeof(init_ntsc)); + if (i < 0) + v4l_dbg(1, debug, client, "init error %d\n", i); + else + v4l_dbg(1, debug, client, "revision 0x%x\n", + saa7185_read(client) >> 5); return 0; } -static int -saa7185_attach_adapter (struct i2c_adapter *adapter) -{ - dprintk(1, - KERN_INFO - "saa7185.c: starting probe for adapter %s (0x%x)\n", - I2C_NAME(adapter), adapter->id); - return i2c_probe(adapter, &addr_data, &saa7185_detect_client); -} - -static int -saa7185_detach_client (struct i2c_client *client) +static int saa7185_remove(struct i2c_client *client) { struct saa7185 *encoder = i2c_get_clientdata(client); - int err; - - err = i2c_detach_client(client); - if (err) { - return err; - } saa7185_write(client, 0x61, (encoder->reg[0x61]) | 0x40); /* SW: output off is active */ //saa7185_write(client, 0x3a, (encoder->reg[0x3a]) | 0x80); /* SW: color bar */ kfree(encoder); - kfree(client); - return 0; } /* ----------------------------------------------------------------------- */ -static struct i2c_driver i2c_driver_saa7185 = { - .driver = { - .name = "saa7185", /* name */ - }, - - .id = I2C_DRIVERID_SAA7185B, +static const struct i2c_device_id saa7185_id[] = { + { "saa7185", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, saa7185_id); - .attach_adapter = saa7185_attach_adapter, - .detach_client = saa7185_detach_client, +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "saa7185", + .driverid = I2C_DRIVERID_SAA7185B, .command = saa7185_command, + .probe = saa7185_probe, + .remove = saa7185_remove, + .id_table = saa7185_id, }; - -static int __init -saa7185_init (void) -{ - return i2c_add_driver(&i2c_driver_saa7185); -} - -static void __exit -saa7185_exit (void) -{ - i2c_del_driver(&i2c_driver_saa7185); -} - -module_init(saa7185_init); -module_exit(saa7185_exit); diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index 76838091dc66..2407607f2eff 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -40,39 +40,39 @@ /* register offsets for sh7722 / sh7723 */ -#define CAPSR 0x00 -#define CAPCR 0x04 -#define CAMCR 0x08 -#define CMCYR 0x0c -#define CAMOR 0x10 -#define CAPWR 0x14 -#define CAIFR 0x18 -#define CSTCR 0x20 /* not on sh7723 */ -#define CSECR 0x24 /* not on sh7723 */ -#define CRCNTR 0x28 -#define CRCMPR 0x2c -#define CFLCR 0x30 -#define CFSZR 0x34 -#define CDWDR 0x38 -#define CDAYR 0x3c -#define CDACR 0x40 -#define CDBYR 0x44 -#define CDBCR 0x48 -#define CBDSR 0x4c -#define CFWCR 0x5c -#define CLFCR 0x60 -#define CDOCR 0x64 -#define CDDCR 0x68 -#define CDDAR 0x6c -#define CEIER 0x70 -#define CETCR 0x74 -#define CSTSR 0x7c -#define CSRTR 0x80 -#define CDSSR 0x84 -#define CDAYR2 0x90 -#define CDACR2 0x94 -#define CDBYR2 0x98 -#define CDBCR2 0x9c +#define CAPSR 0x00 /* Capture start register */ +#define CAPCR 0x04 /* Capture control register */ +#define CAMCR 0x08 /* Capture interface control register */ +#define CMCYR 0x0c /* Capture interface cycle register */ +#define CAMOR 0x10 /* Capture interface offset register */ +#define CAPWR 0x14 /* Capture interface width register */ +#define CAIFR 0x18 /* Capture interface input format register */ +#define CSTCR 0x20 /* Camera strobe control register (<= sh7722) */ +#define CSECR 0x24 /* Camera strobe emission count register (<= sh7722) */ +#define CRCNTR 0x28 /* CEU register control register */ +#define CRCMPR 0x2c /* CEU register forcible control register */ +#define CFLCR 0x30 /* Capture filter control register */ +#define CFSZR 0x34 /* Capture filter size clip register */ +#define CDWDR 0x38 /* Capture destination width register */ +#define CDAYR 0x3c /* Capture data address Y register */ +#define CDACR 0x40 /* Capture data address C register */ +#define CDBYR 0x44 /* Capture data bottom-field address Y register */ +#define CDBCR 0x48 /* Capture data bottom-field address C register */ +#define CBDSR 0x4c /* Capture bundle destination size register */ +#define CFWCR 0x5c /* Firewall operation control register */ +#define CLFCR 0x60 /* Capture low-pass filter control register */ +#define CDOCR 0x64 /* Capture data output control register */ +#define CDDCR 0x68 /* Capture data complexity level register */ +#define CDDAR 0x6c /* Capture data complexity level address register */ +#define CEIER 0x70 /* Capture event interrupt enable register */ +#define CETCR 0x74 /* Capture event flag clear register */ +#define CSTSR 0x7c /* Capture status register */ +#define CSRTR 0x80 /* Capture software reset register */ +#define CDSSR 0x84 /* Capture data size register */ +#define CDAYR2 0x90 /* Capture data address Y register 2 */ +#define CDACR2 0x94 /* Capture data address C register 2 */ +#define CDBYR2 0x98 /* Capture data bottom-field address Y register 2 */ +#define CDBCR2 0x9c /* Capture data bottom-field address C register 2 */ static DEFINE_MUTEX(camera_lock); @@ -165,6 +165,7 @@ static void sh_mobile_ceu_capture(struct sh_mobile_ceu_dev *pcdev) ceu_write(pcdev, CETCR, 0x0317f313 ^ 0x10); if (pcdev->active) { + pcdev->active->state = VIDEOBUF_ACTIVE; ceu_write(pcdev, CDAYR, videobuf_to_dma_contig(pcdev->active)); ceu_write(pcdev, CAPSR, 0x1); /* start capture */ } @@ -236,7 +237,7 @@ static void sh_mobile_ceu_videobuf_queue(struct videobuf_queue *vq, dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %zd\n", __func__, vb, vb->baddr, vb->bsize); - vb->state = VIDEOBUF_ACTIVE; + vb->state = VIDEOBUF_QUEUED; spin_lock_irqsave(&pcdev->lock, flags); list_add_tail(&vb->queue, &pcdev->capture); @@ -323,12 +324,24 @@ static void sh_mobile_ceu_remove_device(struct soc_camera_device *icd) { struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); struct sh_mobile_ceu_dev *pcdev = ici->priv; + unsigned long flags; BUG_ON(icd != pcdev->icd); /* disable capture, disable interrupts */ ceu_write(pcdev, CEIER, 0); ceu_write(pcdev, CAPSR, 1 << 16); /* reset */ + + /* make sure active buffer is canceled */ + spin_lock_irqsave(&pcdev->lock, flags); + if (pcdev->active) { + list_del(&pcdev->active->queue); + pcdev->active->state = VIDEOBUF_ERROR; + wake_up_all(&pcdev->active->done); + pcdev->active = NULL; + } + spin_unlock_irqrestore(&pcdev->lock, flags); + icd->ops->release(icd); dev_info(&icd->dev, @@ -391,7 +404,20 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd, ceu_write(pcdev, CFLCR, 0); /* data fetch mode - no scaling */ ceu_write(pcdev, CFSZR, (icd->height << 16) | cfszr_width); ceu_write(pcdev, CLFCR, 0); /* data fetch mode - no lowpass filter */ - ceu_write(pcdev, CDOCR, 0x00000016); + + /* A few words about byte order (observed in Big Endian mode) + * + * In data fetch mode bytes are received in chunks of 8 bytes. + * D0, D1, D2, D3, D4, D5, D6, D7 (D0 received first) + * + * The data is however by default written to memory in reverse order: + * D7, D6, D5, D4, D3, D2, D1, D0 (D7 written to lowest byte) + * + * The lowest three bits of CDOCR allows us to do swapping, + * using 7 we swap the data bytes to match the incoming order: + * D0, D1, D2, D3, D4, D5, D6, D7 + */ + ceu_write(pcdev, CDOCR, 0x00000017); ceu_write(pcdev, CDWDR, cdwdr_width); ceu_write(pcdev, CFWCR, 0); /* keep "datafetch firewall" disabled */ diff --git a/drivers/media/video/soc_camera_platform.c b/drivers/media/video/soc_camera_platform.c index 1adc257ebdb9..bb7a9d480e8f 100644 --- a/drivers/media/video/soc_camera_platform.c +++ b/drivers/media/video/soc_camera_platform.c @@ -18,15 +18,7 @@ #include <linux/videodev2.h> #include <media/v4l2-common.h> #include <media/soc_camera.h> - -struct soc_camera_platform_info { - int iface; - char *format_name; - unsigned long format_depth; - struct v4l2_pix_format format; - unsigned long bus_param; - int (*set_capture)(struct soc_camera_platform_info *info, int enable); -}; +#include <media/soc_camera_platform.h> struct soc_camera_platform_priv { struct soc_camera_platform_info *info; @@ -44,11 +36,21 @@ soc_camera_platform_get_info(struct soc_camera_device *icd) static int soc_camera_platform_init(struct soc_camera_device *icd) { + struct soc_camera_platform_info *p = soc_camera_platform_get_info(icd); + + if (p->power) + p->power(1); + return 0; } static int soc_camera_platform_release(struct soc_camera_device *icd) { + struct soc_camera_platform_info *p = soc_camera_platform_get_info(icd); + + if (p->power) + p->power(0); + return 0; } diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c index db69bc5556d6..edaea4964513 100644 --- a/drivers/media/video/stk-webcam.c +++ b/drivers/media/video/stk-webcam.c @@ -27,7 +27,6 @@ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/slab.h> -#include <linux/kref.h> #include <linux/usb.h> #include <linux/mm.h> @@ -560,7 +559,7 @@ static void stk_clean_iso(struct stk_camera *dev) urb = dev->isobufs[i].urb; if (urb) { - if (atomic_read(&dev->urbs_used)) + if (atomic_read(&dev->urbs_used) && is_present(dev)) usb_kill_urb(urb); usb_free_urb(urb); } @@ -689,18 +688,14 @@ static int v4l_stk_release(struct inode *inode, struct file *fp) { struct stk_camera *dev = fp->private_data; - if (dev->owner != fp) { - usb_autopm_put_interface(dev->interface); - return 0; + if (dev->owner == fp) { + stk_stop_stream(dev); + stk_free_buffers(dev); + dev->owner = NULL; } - stk_stop_stream(dev); - - stk_free_buffers(dev); - - dev->owner = NULL; - - usb_autopm_put_interface(dev->interface); + if(is_present(dev)) + usb_autopm_put_interface(dev->interface); return 0; } @@ -714,9 +709,6 @@ static ssize_t v4l_stk_read(struct file *fp, char __user *buf, struct stk_sio_buffer *sbuf; struct stk_camera *dev = fp->private_data; - if (dev == NULL) - return -EIO; - if (!is_present(dev)) return -EIO; if (dev->owner && dev->owner != fp) @@ -773,9 +765,6 @@ static unsigned int v4l_stk_poll(struct file *fp, poll_table *wait) { struct stk_camera *dev = fp->private_data; - if (dev == NULL) - return -ENODEV; - poll_wait(fp, &dev->wait_frame, wait); if (!is_present(dev)) @@ -1436,7 +1425,7 @@ static void stk_camera_disconnect(struct usb_interface *interface) wake_up_interruptible(&dev->wait_frame); stk_remove_sysfs_files(&dev->vdev); - STK_INFO("Syntek USB2.0 Camera release resources" + STK_INFO("Syntek USB2.0 Camera release resources " "video device /dev/video%d\n", dev->vdev.minor); video_unregister_device(&dev->vdev); diff --git a/drivers/media/video/stk-webcam.h b/drivers/media/video/stk-webcam.h index 084a85bdd16e..9f6736637571 100644 --- a/drivers/media/video/stk-webcam.h +++ b/drivers/media/video/stk-webcam.h @@ -122,7 +122,6 @@ struct stk_camera { #define vdev_to_camera(d) container_of(d, struct stk_camera, vdev) -void stk_camera_delete(struct kref *); int stk_camera_write_reg(struct stk_camera *, u16, u8); int stk_camera_read_reg(struct stk_camera *, u16, int *); diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c index bcc32fa92a81..3b0b84c2e451 100644 --- a/drivers/media/video/tveeprom.c +++ b/drivers/media/video/tveeprom.c @@ -242,7 +242,7 @@ hauppauge_tuner[] = { TUNER_ABSENT, "TCL M2523_3DBH_E"}, { TUNER_ABSENT, "TCL M2523_3DIH_E"}, { TUNER_ABSENT, "TCL MFPE05_2_U"}, - { TUNER_PHILIPS_FMD1216ME_MK3, "Philips FMD1216MEX"}, + { TUNER_PHILIPS_FMD1216MEX_MK3, "Philips FMD1216MEX"}, { TUNER_ABSENT, "Philips FRH2036B"}, { TUNER_ABSENT, "Panasonic ENGF75_01GF"}, { TUNER_ABSENT, "MaxLinear MXL5005"}, diff --git a/drivers/media/video/videobuf-dvb.c b/drivers/media/video/videobuf-dvb.c index b56cffcbfd45..917277d36605 100644 --- a/drivers/media/video/videobuf-dvb.c +++ b/drivers/media/video/videobuf-dvb.c @@ -126,7 +126,6 @@ static int videobuf_dvb_stop_feed(struct dvb_demux_feed *feed) mutex_lock(&dvb->lock); dvb->nfeeds--; if (0 == dvb->nfeeds && NULL != dvb->thread) { - // FIXME: cx8802_cancel_buffers(dev); err = kthread_stop(dvb->thread); dvb->thread = NULL; } @@ -134,30 +133,38 @@ static int videobuf_dvb_stop_feed(struct dvb_demux_feed *feed) return err; } -/* ------------------------------------------------------------------ */ - -int videobuf_dvb_register(struct videobuf_dvb *dvb, +static int videobuf_dvb_register_adapter(struct videobuf_dvb_frontends *fe, struct module *module, void *adapter_priv, struct device *device, - short *adapter_nr) + char *adapter_name, + short *adapter_nr, + int mfe_shared) { int result; - mutex_init(&dvb->lock); + mutex_init(&fe->lock); /* register adapter */ - result = dvb_register_adapter(&dvb->adapter, dvb->name, module, device, - adapter_nr); + result = dvb_register_adapter(&fe->adapter, adapter_name, module, + device, adapter_nr); if (result < 0) { printk(KERN_WARNING "%s: dvb_register_adapter failed (errno = %d)\n", - dvb->name, result); - goto fail_adapter; + adapter_name, result); } - dvb->adapter.priv = adapter_priv; + fe->adapter.priv = adapter_priv; + fe->adapter.mfe_shared = mfe_shared; + + return result; +} + +static int videobuf_dvb_register_frontend(struct dvb_adapter *adapter, + struct videobuf_dvb *dvb) +{ + int result; /* register frontend */ - result = dvb_register_frontend(&dvb->adapter, dvb->frontend); + result = dvb_register_frontend(adapter, dvb->frontend); if (result < 0) { printk(KERN_WARNING "%s: dvb_register_frontend failed (errno = %d)\n", dvb->name, result); @@ -183,7 +190,8 @@ int videobuf_dvb_register(struct videobuf_dvb *dvb, dvb->dmxdev.filternum = 256; dvb->dmxdev.demux = &dvb->demux.dmx; dvb->dmxdev.capabilities = 0; - result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter); + result = dvb_dmxdev_init(&dvb->dmxdev, adapter); + if (result < 0) { printk(KERN_WARNING "%s: dvb_dmxdev_init failed (errno = %d)\n", dvb->name, result); @@ -214,7 +222,11 @@ int videobuf_dvb_register(struct videobuf_dvb *dvb, } /* register network adapter */ - dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx); + dvb_net_init(adapter, &dvb->net, &dvb->demux.dmx); + if (dvb->net.dvbdev == NULL) { + result = -ENOMEM; + goto fail_fe_conn; + } return 0; fail_fe_conn: @@ -229,30 +241,151 @@ fail_dmx: dvb_unregister_frontend(dvb->frontend); fail_frontend: dvb_frontend_detach(dvb->frontend); - dvb_unregister_adapter(&dvb->adapter); -fail_adapter: + dvb->frontend = NULL; + return result; } -void videobuf_dvb_unregister(struct videobuf_dvb *dvb) +/* ------------------------------------------------------------------ */ +/* Register a single adapter and one or more frontends */ +int videobuf_dvb_register_bus(struct videobuf_dvb_frontends *f, + struct module *module, + void *adapter_priv, + struct device *device, + short *adapter_nr, + int mfe_shared) { - dvb_net_release(&dvb->net); - dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem); - dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw); - dvb_dmxdev_release(&dvb->dmxdev); - dvb_dmx_release(&dvb->demux); - dvb_unregister_frontend(dvb->frontend); - dvb_frontend_detach(dvb->frontend); - dvb_unregister_adapter(&dvb->adapter); + struct list_head *list, *q; + struct videobuf_dvb_frontend *fe; + int res; + + fe = videobuf_dvb_get_frontend(f, 1); + if (!fe) { + printk(KERN_WARNING "Unable to register the adapter which has no frontends\n"); + return -EINVAL; + } + + /* Bring up the adapter */ + res = videobuf_dvb_register_adapter(f, module, adapter_priv, device, + fe->dvb.name, adapter_nr, mfe_shared); + if (res < 0) { + printk(KERN_WARNING "videobuf_dvb_register_adapter failed (errno = %d)\n", res); + return res; + } + + /* Attach all of the frontends to the adapter */ + mutex_lock(&f->lock); + list_for_each_safe(list, q, &f->felist) { + fe = list_entry(list, struct videobuf_dvb_frontend, felist); + res = videobuf_dvb_register_frontend(&f->adapter, &fe->dvb); + if (res < 0) { + printk(KERN_WARNING "%s: videobuf_dvb_register_frontend failed (errno = %d)\n", + fe->dvb.name, res); + goto err; + } + } + mutex_unlock(&f->lock); + return 0; + +err: + mutex_unlock(&f->lock); + videobuf_dvb_unregister_bus(f); + return res; } +EXPORT_SYMBOL(videobuf_dvb_register_bus); -EXPORT_SYMBOL(videobuf_dvb_register); -EXPORT_SYMBOL(videobuf_dvb_unregister); +void videobuf_dvb_unregister_bus(struct videobuf_dvb_frontends *f) +{ + struct list_head *list, *q; + struct videobuf_dvb_frontend *fe; + + mutex_lock(&f->lock); + list_for_each_safe(list, q, &f->felist) { + fe = list_entry(list, struct videobuf_dvb_frontend, felist); + if (fe->dvb.net.dvbdev) { + dvb_net_release(&fe->dvb.net); + fe->dvb.demux.dmx.remove_frontend(&fe->dvb.demux.dmx, + &fe->dvb.fe_mem); + fe->dvb.demux.dmx.remove_frontend(&fe->dvb.demux.dmx, + &fe->dvb.fe_hw); + dvb_dmxdev_release(&fe->dvb.dmxdev); + dvb_dmx_release(&fe->dvb.demux); + dvb_unregister_frontend(fe->dvb.frontend); + } + if (fe->dvb.frontend) + /* always allocated, may have been reset */ + dvb_frontend_detach(fe->dvb.frontend); + list_del(list); + kfree(fe); + } + mutex_unlock(&f->lock); -/* ------------------------------------------------------------------ */ -/* - * Local variables: - * c-basic-offset: 8 - * compile-command: "make DVB=1" - * End: - */ + dvb_unregister_adapter(&f->adapter); +} +EXPORT_SYMBOL(videobuf_dvb_unregister_bus); + +struct videobuf_dvb_frontend *videobuf_dvb_get_frontend( + struct videobuf_dvb_frontends *f, int id) +{ + struct list_head *list, *q; + struct videobuf_dvb_frontend *fe, *ret = NULL; + + mutex_lock(&f->lock); + + list_for_each_safe(list, q, &f->felist) { + fe = list_entry(list, struct videobuf_dvb_frontend, felist); + if (fe->id == id) { + ret = fe; + break; + } + } + + mutex_unlock(&f->lock); + + return ret; +} +EXPORT_SYMBOL(videobuf_dvb_get_frontend); + +int videobuf_dvb_find_frontend(struct videobuf_dvb_frontends *f, + struct dvb_frontend *p) +{ + struct list_head *list, *q; + struct videobuf_dvb_frontend *fe = NULL; + int ret = 0; + + mutex_lock(&f->lock); + + list_for_each_safe(list, q, &f->felist) { + fe = list_entry(list, struct videobuf_dvb_frontend, felist); + if (fe->dvb.frontend == p) { + ret = fe->id; + break; + } + } + + mutex_unlock(&f->lock); + + return ret; +} +EXPORT_SYMBOL(videobuf_dvb_find_frontend); + +struct videobuf_dvb_frontend *videobuf_dvb_alloc_frontend( + struct videobuf_dvb_frontends *f, int id) +{ + struct videobuf_dvb_frontend *fe; + + fe = kzalloc(sizeof(struct videobuf_dvb_frontend), GFP_KERNEL); + if (fe == NULL) + goto fail_alloc; + + fe->id = id; + mutex_init(&fe->dvb.lock); + + mutex_lock(&f->lock); + list_add_tail(&fe->felist, &f->felist); + mutex_unlock(&f->lock); + +fail_alloc: + return fe; +} +EXPORT_SYMBOL(videobuf_dvb_alloc_frontend); diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index 65c8af18e767..7d7e51def461 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -128,12 +128,56 @@ struct vivi_fmt { int depth; }; -static struct vivi_fmt format = { - .name = "4:2:2, packed, YUYV", - .fourcc = V4L2_PIX_FMT_YUYV, - .depth = 16, +static struct vivi_fmt formats[] = { + { + .name = "4:2:2, packed, YUYV", + .fourcc = V4L2_PIX_FMT_YUYV, + .depth = 16, + }, + { + .name = "4:2:2, packed, UYVY", + .fourcc = V4L2_PIX_FMT_UYVY, + .depth = 16, + }, + { + .name = "RGB565 (LE)", + .fourcc = V4L2_PIX_FMT_RGB565, /* gggbbbbb rrrrrggg */ + .depth = 16, + }, + { + .name = "RGB565 (BE)", + .fourcc = V4L2_PIX_FMT_RGB565X, /* rrrrrggg gggbbbbb */ + .depth = 16, + }, + { + .name = "RGB555 (LE)", + .fourcc = V4L2_PIX_FMT_RGB555, /* gggbbbbb arrrrrgg */ + .depth = 16, + }, + { + .name = "RGB555 (BE)", + .fourcc = V4L2_PIX_FMT_RGB555X, /* arrrrrgg gggbbbbb */ + .depth = 16, + }, }; +static struct vivi_fmt *get_format(struct v4l2_format *f) +{ + struct vivi_fmt *fmt; + unsigned int k; + + for (k = 0; k < ARRAY_SIZE(formats); k++) { + fmt = &formats[k]; + if (fmt->fourcc == f->fmt.pix.pixelformat) + break; + } + + if (k == ARRAY_SIZE(formats)) + return NULL; + + return &formats[k]; +} + struct sg_to_addr { int pos; struct scatterlist *sg; @@ -190,6 +234,7 @@ struct vivi_fh { struct videobuf_queue vb_vidq; enum v4l2_buf_type type; + unsigned char bars[8][3]; }; /* ------------------------------------------------------------------ @@ -234,42 +279,118 @@ static u8 bars[8][3] = { #define TSTAMP_MAX_Y TSTAMP_MIN_Y+15 #define TSTAMP_MIN_X 64 -static void gen_line(char *basep, int inipos, int wmax, - int hmax, int line, int count, char *timestr) +static void gen_twopix(struct vivi_fh *fh, unsigned char *buf, int colorpos) { - int w, i, j, y; - int pos = inipos; - char *p, *s; - u8 chr, r, g, b, color; + unsigned char r_y, g_u, b_v; + unsigned char *p; + int color; - /* We will just duplicate the second pixel at the packet */ - wmax /= 2; + r_y = fh->bars[colorpos][0]; /* R or precalculated Y */ + g_u = fh->bars[colorpos][1]; /* G or precalculated U */ + b_v = fh->bars[colorpos][2]; /* B or precalculated V */ - /* Generate a standard color bar pattern */ - for (w = 0; w < wmax; w++) { - int colorpos = ((w + count) * 8/(wmax + 1)) % 8; - r = bars[colorpos][0]; - g = bars[colorpos][1]; - b = bars[colorpos][2]; - - for (color = 0; color < 4; color++) { - p = basep + pos; + for (color = 0; color < 4; color++) { + p = buf + color; + switch (fh->fmt->fourcc) { + case V4L2_PIX_FMT_YUYV: switch (color) { case 0: case 2: - *p = TO_Y(r, g, b); /* Luma */ + *p = r_y; break; case 1: - *p = TO_U(r, g, b); /* Cb */ + *p = g_u; break; case 3: - *p = TO_V(r, g, b); /* Cr */ + *p = b_v; + break; + } + break; + case V4L2_PIX_FMT_UYVY: + switch (color) { + case 1: + case 3: + *p = r_y; + break; + case 0: + *p = g_u; + break; + case 2: + *p = b_v; + break; + } + break; + case V4L2_PIX_FMT_RGB565: + switch (color) { + case 0: + case 2: + *p = (g_u << 5) | b_v; + break; + case 1: + case 3: + *p = (r_y << 3) | (g_u >> 3); + break; + } + break; + case V4L2_PIX_FMT_RGB565X: + switch (color) { + case 0: + case 2: + *p = (r_y << 3) | (g_u >> 3); + break; + case 1: + case 3: + *p = (g_u << 5) | b_v; break; } - pos++; + break; + case V4L2_PIX_FMT_RGB555: + switch (color) { + case 0: + case 2: + *p = (g_u << 5) | b_v; + break; + case 1: + case 3: + *p = (r_y << 2) | (g_u >> 3); + break; + } + break; + case V4L2_PIX_FMT_RGB555X: + switch (color) { + case 0: + case 2: + *p = (r_y << 2) | (g_u >> 3); + break; + case 1: + case 3: + *p = (g_u << 5) | b_v; + break; + } + break; } } +} + +static void gen_line(struct vivi_fh *fh, char *basep, int inipos, int wmax, + int hmax, int line, int count, char *timestr) +{ + int w, i, j; + int pos = inipos; + char *s; + u8 chr; + + /* We will just duplicate the second pixel at the packet */ + wmax /= 2; + + /* Generate a standard color bar pattern */ + for (w = 0; w < wmax; w++) { + int colorpos = ((w + count) * 8/(wmax + 1)) % 8; + + gen_twopix(fh, basep + pos, colorpos); + pos += 4; /* only 16 bpp supported for now */ + } /* Checks if it is possible to show timestamp */ if (TSTAMP_MAX_Y >= hmax) @@ -283,38 +404,12 @@ static void gen_line(char *basep, int inipos, int wmax, for (s = timestr; *s; s++) { chr = rom8x16_bits[(*s-0x30)*16+line-TSTAMP_MIN_Y]; for (i = 0; i < 7; i++) { - if (chr & 1 << (7 - i)) { - /* Font color*/ - r = 0; - g = 198; - b = 0; - } else { - /* Background color */ - r = bars[BLACK][0]; - g = bars[BLACK][1]; - b = bars[BLACK][2]; - } - pos = inipos + j * 2; - for (color = 0; color < 4; color++) { - p = basep + pos; - - y = TO_Y(r, g, b); - - switch (color) { - case 0: - case 2: - *p = TO_Y(r, g, b); /* Luma */ - break; - case 1: - *p = TO_U(r, g, b); /* Cb */ - break; - case 3: - *p = TO_V(r, g, b); /* Cr */ - break; - } - pos++; - } + /* Draw white font on black background */ + if (chr & 1 << (7 - i)) + gen_twopix(fh, basep + pos, WHITE); + else + gen_twopix(fh, basep + pos, BLACK); j++; } } @@ -324,8 +419,9 @@ end: return; } -static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf) +static void vivi_fillbuff(struct vivi_fh *fh, struct vivi_buffer *buf) { + struct vivi_dev *dev = fh->dev; int h , pos = 0; int hmax = buf->vb.height; int wmax = buf->vb.width; @@ -341,7 +437,7 @@ static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf) return; for (h = 0; h < hmax; h++) { - gen_line(tmpbuf, 0, wmax, hmax, h, dev->mv_count, + gen_line(fh, tmpbuf, 0, wmax, hmax, h, dev->mv_count, dev->timestr); memcpy(vbuf + pos, tmpbuf, wmax * 2); pos += wmax*2; @@ -410,7 +506,7 @@ static void vivi_thread_tick(struct vivi_fh *fh) do_gettimeofday(&buf->vb.ts); /* Fill buffer */ - vivi_fillbuff(dev, buf); + vivi_fillbuff(fh, buf); dprintk(dev, 1, "filled buffer %p\n", buf); wake_up(&buf->vb.done); @@ -636,11 +732,15 @@ static int vidioc_querycap(struct file *file, void *priv, static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, struct v4l2_fmtdesc *f) { - if (f->index > 0) + struct vivi_fmt *fmt; + + if (f->index >= ARRAY_SIZE(formats)) return -EINVAL; - strlcpy(f->description, format.name, sizeof(f->description)); - f->pixelformat = format.fourcc; + fmt = &formats[f->index]; + + strlcpy(f->description, fmt->name, sizeof(f->description)); + f->pixelformat = fmt->fourcc; return 0; } @@ -670,13 +770,12 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, enum v4l2_field field; unsigned int maxw, maxh; - if (format.fourcc != f->fmt.pix.pixelformat) { - dprintk(dev, 1, "Fourcc format (0x%08x) invalid. " - "Driver accepts only 0x%08x\n", - f->fmt.pix.pixelformat, format.fourcc); + fmt = get_format(f); + if (!fmt) { + dprintk(dev, 1, "Fourcc format (0x%08x) invalid.\n", + f->fmt.pix.pixelformat); return -EINVAL; } - fmt = &format; field = f->fmt.pix.field; @@ -714,6 +813,8 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, { struct vivi_fh *fh = priv; struct videobuf_queue *q = &fh->vb_vidq; + unsigned char r, g, b; + int k, is_yuv; int ret = vidioc_try_fmt_vid_cap(file, fh, f); if (ret < 0) @@ -727,12 +828,49 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, goto out; } - fh->fmt = &format; + fh->fmt = get_format(f); fh->width = f->fmt.pix.width; fh->height = f->fmt.pix.height; fh->vb_vidq.field = f->fmt.pix.field; fh->type = f->type; + /* precalculate color bar values to speed up rendering */ + for (k = 0; k < 8; k++) { + r = bars[k][0]; + g = bars[k][1]; + b = bars[k][2]; + is_yuv = 0; + + switch (fh->fmt->fourcc) { + case V4L2_PIX_FMT_YUYV: + case V4L2_PIX_FMT_UYVY: + is_yuv = 1; + break; + case V4L2_PIX_FMT_RGB565: + case V4L2_PIX_FMT_RGB565X: + r >>= 3; + g >>= 2; + b >>= 3; + break; + case V4L2_PIX_FMT_RGB555: + case V4L2_PIX_FMT_RGB555X: + r >>= 3; + g >>= 3; + b >>= 3; + break; + } + + if (is_yuv) { + fh->bars[k][0] = TO_Y(r, g, b); /* Luma */ + fh->bars[k][1] = TO_U(r, g, b); /* Cb */ + fh->bars[k][2] = TO_V(r, g, b); /* Cr */ + } else { + fh->bars[k][0] = r; + fh->bars[k][1] = g; + fh->bars[k][2] = b; + } + } + ret = 0; out: mutex_unlock(&q->vb_lock); @@ -886,8 +1024,6 @@ static int vidioc_s_ctrl(struct file *file, void *priv, File operations for the device ------------------------------------------------------------------*/ -#define line_buf_size(norm) (norm_maxw(norm)*(format.depth+7)/8) - static int vivi_open(struct inode *inode, struct file *file) { int minor = iminor(inode); @@ -936,7 +1072,7 @@ unlock: fh->dev = dev; fh->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - fh->fmt = &format; + fh->fmt = &formats[0]; fh->width = 640; fh->height = 480; diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c index 45be9ec8edc4..67aa0db4b81a 100644 --- a/drivers/media/video/vpx3220.c +++ b/drivers/media/video/vpx3220.c @@ -22,32 +22,21 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/types.h> -#include <linux/slab.h> - -#include <asm/io.h> #include <asm/uaccess.h> - #include <linux/i2c.h> - -#define I2C_NAME(x) (x)->name - -#include <linux/videodev.h> #include <media/v4l2-common.h> +#include <media/v4l2-i2c-drv-legacy.h> +#include <linux/videodev.h> #include <linux/video_decoder.h> -#define I2C_VPX3220 0x86 -#define VPX3220_DEBUG KERN_DEBUG "vpx3220: " +MODULE_DESCRIPTION("vpx3220a/vpx3216b/vpx3214c video decoder driver"); +MODULE_AUTHOR("Laurent Pinchart"); +MODULE_LICENSE("GPL"); static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); -#define dprintk(num, format, args...) \ - do { \ - if (debug >= num) \ - printk(format, ##args); \ - } while (0) - #define VPX_TIMEOUT_COUNT 10 /* ----------------------------------------------------------------------- */ @@ -67,10 +56,8 @@ struct vpx3220 { static char *inputs[] = { "internal", "composite", "svideo" }; /* ----------------------------------------------------------------------- */ -static inline int -vpx3220_write (struct i2c_client *client, - u8 reg, - u8 value) + +static inline int vpx3220_write(struct i2c_client *client, u8 reg, u8 value) { struct vpx3220 *decoder = i2c_get_clientdata(client); @@ -78,15 +65,12 @@ vpx3220_write (struct i2c_client *client, return i2c_smbus_write_byte_data(client, reg, value); } -static inline int -vpx3220_read (struct i2c_client *client, - u8 reg) +static inline int vpx3220_read(struct i2c_client *client, u8 reg) { return i2c_smbus_read_byte_data(client, reg); } -static int -vpx3220_fp_status (struct i2c_client *client) +static int vpx3220_fp_status(struct i2c_client *client) { unsigned char status; unsigned int i; @@ -106,14 +90,11 @@ vpx3220_fp_status (struct i2c_client *client) return -1; } -static int -vpx3220_fp_write (struct i2c_client *client, - u8 fpaddr, - u16 data) +static int vpx3220_fp_write(struct i2c_client *client, u8 fpaddr, u16 data) { /* Write the 16-bit address to the FPWR register */ if (i2c_smbus_write_word_data(client, 0x27, swab16(fpaddr)) == -1) { - dprintk(1, VPX3220_DEBUG "%s: failed\n", __func__); + v4l_dbg(1, debug, client, "%s: failed\n", __func__); return -1; } @@ -122,22 +103,20 @@ vpx3220_fp_write (struct i2c_client *client, /* Write the 16-bit data to the FPDAT register */ if (i2c_smbus_write_word_data(client, 0x28, swab16(data)) == -1) { - dprintk(1, VPX3220_DEBUG "%s: failed\n", __func__); + v4l_dbg(1, debug, client, "%s: failed\n", __func__); return -1; } return 0; } -static u16 -vpx3220_fp_read (struct i2c_client *client, - u16 fpaddr) +static u16 vpx3220_fp_read(struct i2c_client *client, u16 fpaddr) { s16 data; /* Write the 16-bit address to the FPRD register */ if (i2c_smbus_write_word_data(client, 0x26, swab16(fpaddr)) == -1) { - dprintk(1, VPX3220_DEBUG "%s: failed\n", __func__); + v4l_dbg(1, debug, client, "%s: failed\n", __func__); return -1; } @@ -147,25 +126,22 @@ vpx3220_fp_read (struct i2c_client *client, /* Read the 16-bit data from the FPDAT register */ data = i2c_smbus_read_word_data(client, 0x28); if (data == -1) { - dprintk(1, VPX3220_DEBUG "%s: failed\n", __func__); + v4l_dbg(1, debug, client, "%s: failed\n", __func__); return -1; } return swab16(data); } -static int -vpx3220_write_block (struct i2c_client *client, - const u8 *data, - unsigned int len) +static int vpx3220_write_block(struct i2c_client *client, const u8 *data, unsigned int len) { u8 reg; int ret = -1; while (len >= 2) { reg = *data++; - if ((ret = - vpx3220_write(client, reg, *data++)) < 0) + ret = vpx3220_write(client, reg, *data++); + if (ret < 0) break; len -= 2; } @@ -173,10 +149,8 @@ vpx3220_write_block (struct i2c_client *client, return ret; } -static int -vpx3220_write_fp_block (struct i2c_client *client, - const u16 *data, - unsigned int len) +static int vpx3220_write_fp_block(struct i2c_client *client, + const u16 *data, unsigned int len) { u8 reg; int ret = 0; @@ -285,25 +259,20 @@ static const unsigned short init_fp[] = { 0x4b, 0x298, /* PLL gain */ }; -static void -vpx3220_dump_i2c (struct i2c_client *client) +static void vpx3220_dump_i2c(struct i2c_client *client) { int len = sizeof(init_common); const unsigned char *data = init_common; while (len > 1) { - dprintk(1, - KERN_DEBUG "vpx3216b i2c reg 0x%02x data 0x%02x\n", + v4l_dbg(1, debug, client, "i2c reg 0x%02x data 0x%02x\n", *data, vpx3220_read(client, *data)); data += 2; len -= 2; } } -static int -vpx3220_command (struct i2c_client *client, - unsigned int cmd, - void *arg) +static int vpx3220_command(struct i2c_client *client, unsigned cmd, void *arg) { struct vpx3220 *decoder = i2c_get_clientdata(client); @@ -315,7 +284,6 @@ vpx3220_command (struct i2c_client *client, vpx3220_write_fp_block(client, init_fp, sizeof(init_fp) >> 1); switch (decoder->norm) { - case VIDEO_MODE_NTSC: vpx3220_write_fp_block(client, init_ntsc, sizeof(init_ntsc) >> 1); @@ -334,21 +302,20 @@ vpx3220_command (struct i2c_client *client, sizeof(init_pal) >> 1); break; } - } break; + } case DECODER_DUMP: { vpx3220_dump_i2c(client); - } break; + } case DECODER_GET_CAPABILITIES: { struct video_decoder_capability *cap = arg; - dprintk(1, KERN_DEBUG "%s: DECODER_GET_CAPABILITIES\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "DECODER_GET_CAPABILITIES\n"); cap->flags = VIDEO_DECODER_PAL | VIDEO_DECODER_NTSC | @@ -357,20 +324,18 @@ vpx3220_command (struct i2c_client *client, VIDEO_DECODER_CCIR; cap->inputs = 3; cap->outputs = 1; - } break; + } case DECODER_GET_STATUS: { int res = 0, status; - dprintk(1, KERN_INFO "%s: DECODER_GET_STATUS\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "DECODER_GET_STATUS\n"); status = vpx3220_fp_read(client, 0x0f3); - dprintk(1, KERN_INFO "%s: status: 0x%04x\n", I2C_NAME(client), - status); + v4l_dbg(1, debug, client, "status: 0x%04x\n", status); if (status < 0) return status; @@ -379,7 +344,6 @@ vpx3220_command (struct i2c_client *client, res |= DECODER_STATUS_GOOD | DECODER_STATUS_COLOR; switch (status & 0x18) { - case 0x00: case 0x10: case 0x14: @@ -400,8 +364,8 @@ vpx3220_command (struct i2c_client *client, } *(int *) arg = res; - } break; + } case DECODER_SET_NORM: { @@ -413,50 +377,43 @@ vpx3220_command (struct i2c_client *client, choosen video norm */ temp_input = vpx3220_fp_read(client, 0xf2); - dprintk(1, KERN_DEBUG "%s: DECODER_SET_NORM %d\n", - I2C_NAME(client), *iarg); + v4l_dbg(1, debug, client, "DECODER_SET_NORM %d\n", *iarg); switch (*iarg) { - case VIDEO_MODE_NTSC: vpx3220_write_fp_block(client, init_ntsc, sizeof(init_ntsc) >> 1); - dprintk(1, KERN_INFO "%s: norm switched to NTSC\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "norm switched to NTSC\n"); break; case VIDEO_MODE_PAL: vpx3220_write_fp_block(client, init_pal, sizeof(init_pal) >> 1); - dprintk(1, KERN_INFO "%s: norm switched to PAL\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "norm switched to PAL\n"); break; case VIDEO_MODE_SECAM: vpx3220_write_fp_block(client, init_secam, sizeof(init_secam) >> 1); - dprintk(1, KERN_INFO "%s: norm switched to SECAM\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "norm switched to SECAM\n"); break; case VIDEO_MODE_AUTO: /* FIXME This is only preliminary support */ data = vpx3220_fp_read(client, 0xf2) & 0x20; vpx3220_fp_write(client, 0xf2, 0x00c0 | data); - dprintk(1, KERN_INFO "%s: norm switched to Auto\n", - I2C_NAME(client)); + v4l_dbg(1, debug, client, "norm switched to AUTO\n"); break; default: return -EINVAL; - } decoder->norm = *iarg; /* And here we set the backed up video input again */ vpx3220_fp_write(client, 0xf2, temp_input | 0x0010); udelay(10); - } break; + } case DECODER_SET_INPUT: { @@ -475,8 +432,7 @@ vpx3220_command (struct i2c_client *client, if (*iarg < 0 || *iarg > 2) return -EINVAL; - dprintk(1, KERN_INFO "%s: input switched to %s\n", - I2C_NAME(client), inputs[*iarg]); + v4l_dbg(1, debug, client, "input switched to %s\n", inputs[*iarg]); vpx3220_write(client, 0x33, input[*iarg][0]); @@ -488,8 +444,8 @@ vpx3220_command (struct i2c_client *client, data | (input[*iarg][1] << 5) | 0x0010); udelay(10); - } break; + } case DECODER_SET_OUTPUT: { @@ -499,19 +455,18 @@ vpx3220_command (struct i2c_client *client, if (*iarg != 0) { return -EINVAL; } - } break; + } case DECODER_ENABLE_OUTPUT: { int *iarg = arg; - dprintk(1, KERN_DEBUG "%s: DECODER_ENABLE_OUTPUT %d\n", - I2C_NAME(client), *iarg); + v4l_dbg(1, debug, client, "DECODER_ENABLE_OUTPUT %d\n", *iarg); vpx3220_write(client, 0xf2, (*iarg ? 0x1b : 0x00)); - } break; + } case DECODER_SET_PICTURE: { @@ -542,8 +497,8 @@ vpx3220_command (struct i2c_client *client, vpx3220_fp_write(client, 0x1c, ((decoder->hue - 32768) >> 6) & 0xFFF); } - } break; + } default: return -EINVAL; @@ -552,8 +507,7 @@ vpx3220_command (struct i2c_client *client, return 0; } -static int -vpx3220_init_client (struct i2c_client *client) +static int vpx3220_init_client(struct i2c_client *client) { vpx3220_write_block(client, init_common, sizeof(init_common)); vpx3220_write_fp_block(client, init_fp, sizeof(init_fp) >> 1); @@ -567,115 +521,26 @@ vpx3220_init_client (struct i2c_client *client) * Client management code */ -/* - * Generic i2c probe - * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' - */ -static unsigned short normal_i2c[] = - { I2C_VPX3220 >> 1, (I2C_VPX3220 >> 1) + 4, - I2C_CLIENT_END -}; - -static unsigned short ignore = I2C_CLIENT_END; +static unsigned short normal_i2c[] = { 0x86 >> 1, 0x8e >> 1, I2C_CLIENT_END }; -static struct i2c_client_address_data addr_data = { - .normal_i2c = normal_i2c, - .probe = &ignore, - .ignore = &ignore, -}; - -static struct i2c_driver vpx3220_i2c_driver; - -static int -vpx3220_detach_client (struct i2c_client *client) -{ - struct vpx3220 *decoder = i2c_get_clientdata(client); - int err; - - err = i2c_detach_client(client); - if (err) { - return err; - } - - kfree(decoder); - kfree(client); - - return 0; -} +I2C_CLIENT_INSMOD; -static int -vpx3220_detect_client (struct i2c_adapter *adapter, - int address, - int kind) +static int vpx3220_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - int err; - struct i2c_client *client; struct vpx3220 *decoder; - - dprintk(1, VPX3220_DEBUG "%s\n", __func__); + const char *name = NULL; + u8 ver; + u16 pn; /* Check if the adapter supports the needed features */ - if (!i2c_check_functionality - (adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) - return 0; - - client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (client == NULL) { - return -ENOMEM; - } - - client->addr = address; - client->adapter = adapter; - client->driver = &vpx3220_i2c_driver; - - /* Check for manufacture ID and part number */ - if (kind < 0) { - u8 id; - u16 pn; - - id = vpx3220_read(client, 0x00); - if (id != 0xec) { - dprintk(1, - KERN_INFO - "vpx3220_attach: Wrong manufacturer ID (0x%02x)\n", - id); - kfree(client); - return 0; - } - - pn = (vpx3220_read(client, 0x02) << 8) + - vpx3220_read(client, 0x01); - switch (pn) { - case 0x4680: - strlcpy(I2C_NAME(client), "vpx3220a", - sizeof(I2C_NAME(client))); - break; - case 0x4260: - strlcpy(I2C_NAME(client), "vpx3216b", - sizeof(I2C_NAME(client))); - break; - case 0x4280: - strlcpy(I2C_NAME(client), "vpx3214c", - sizeof(I2C_NAME(client))); - break; - default: - dprintk(1, - KERN_INFO - "%s: Wrong part number (0x%04x)\n", - __func__, pn); - kfree(client); - return 0; - } - } else { - strlcpy(I2C_NAME(client), "forced vpx32xx", - sizeof(I2C_NAME(client))); - } + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; decoder = kzalloc(sizeof(struct vpx3220), GFP_KERNEL); - if (decoder == NULL) { - kfree(client); + if (decoder == NULL) return -ENOMEM; - } decoder->norm = VIDEO_MODE_PAL; decoder->input = 0; decoder->enable = 1; @@ -685,63 +550,52 @@ vpx3220_detect_client (struct i2c_adapter *adapter, decoder->sat = 32768; i2c_set_clientdata(client, decoder); - err = i2c_attach_client(client); - if (err) { - kfree(client); - kfree(decoder); - return err; + ver = i2c_smbus_read_byte_data(client, 0x00); + pn = (i2c_smbus_read_byte_data(client, 0x02) << 8) + + i2c_smbus_read_byte_data(client, 0x01); + if (ver == 0xec) { + switch (pn) { + case 0x4680: + name = "vpx3220a"; + break; + case 0x4260: + name = "vpx3216b"; + break; + case 0x4280: + name = "vpx3214c"; + break; + } } - - dprintk(1, KERN_INFO "%s: vpx32xx client found at address 0x%02x\n", - I2C_NAME(client), client->addr << 1); + if (name) + v4l_info(client, "%s found @ 0x%x (%s)\n", name, + client->addr << 1, client->adapter->name); + else + v4l_info(client, "chip (%02x:%04x) found @ 0x%x (%s)\n", + ver, pn, client->addr << 1, client->adapter->name); vpx3220_init_client(client); - return 0; } -static int -vpx3220_attach_adapter (struct i2c_adapter *adapter) +static int vpx3220_remove(struct i2c_client *client) { - int ret; - - ret = i2c_probe(adapter, &addr_data, &vpx3220_detect_client); - dprintk(1, VPX3220_DEBUG "%s: i2c_probe returned %d\n", - __func__, ret); - return ret; + kfree(i2c_get_clientdata(client)); + return 0; } -/* ----------------------------------------------------------------------- - * Driver initialization and cleanup code - */ - -static struct i2c_driver vpx3220_i2c_driver = { - .driver = { - .name = "vpx3220", - }, - - .id = I2C_DRIVERID_VPX3220, +static const struct i2c_device_id vpx3220_id[] = { + { "vpx3220a", 0 }, + { "vpx3216b", 0 }, + { "vpx3214c", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, vpx3220_id); - .attach_adapter = vpx3220_attach_adapter, - .detach_client = vpx3220_detach_client, +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "vpx3220", + .driverid = I2C_DRIVERID_VPX3220, .command = vpx3220_command, + .probe = vpx3220_probe, + .remove = vpx3220_remove, + .id_table = vpx3220_id, }; - -static int __init -vpx3220_init (void) -{ - return i2c_add_driver(&vpx3220_i2c_driver); -} - -static void __exit -vpx3220_cleanup (void) -{ - i2c_del_driver(&vpx3220_i2c_driver); -} - -module_init(vpx3220_init); -module_exit(vpx3220_cleanup); - -MODULE_DESCRIPTION("vpx3220a/vpx3216b/vpx3214c video decoder driver"); -MODULE_AUTHOR("Laurent Pinchart"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c index 3282be730298..fa5f2f8f518a 100644 --- a/drivers/media/video/zoran/zoran_card.c +++ b/drivers/media/video/zoran/zoran_card.c @@ -817,6 +817,7 @@ zoran_register_i2c (struct zoran *zr) memcpy(&zr->i2c_algo, &zoran_i2c_bit_data_template, sizeof(struct i2c_algo_bit_data)); zr->i2c_algo.data = zr; + zr->i2c_adapter.class = I2C_CLASS_TV_ANALOG; zr->i2c_adapter.id = I2C_HW_B_ZR36067; zr->i2c_adapter.client_register = zoran_i2c_client_register; zr->i2c_adapter.client_unregister = zoran_i2c_client_unregister; diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c index 25de7631443e..db11ab9e60da 100644 --- a/drivers/media/video/zoran/zoran_driver.c +++ b/drivers/media/video/zoran/zoran_driver.c @@ -2996,7 +2996,6 @@ zoran_do_ioctl (struct inode *inode, break; default: - dprintk(3, "unsupported\n"); dprintk(1, KERN_ERR "%s: VIDIOC_S_FMT - unsupported type %d\n", diff --git a/fs/Kconfig b/fs/Kconfig index 9e9d70c02a07..d0a1174fb516 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -160,7 +160,7 @@ config EXT4_FS filesystem initially. To compile this file system support as a module, choose M here. The - module will be called ext4dev. + module will be called ext4. If unsure, say N. diff --git a/fs/Makefile b/fs/Makefile index d0c69f57e5bf..2168c902d5ca 100644 --- a/fs/Makefile +++ b/fs/Makefile @@ -71,7 +71,7 @@ obj-$(CONFIG_DLM) += dlm/ # Do not add any filesystems before this line obj-$(CONFIG_REISERFS_FS) += reiserfs/ obj-$(CONFIG_EXT3_FS) += ext3/ # Before ext2 so root fs can be ext3 -obj-$(CONFIG_EXT4_FS) += ext4/ # Before ext2 so root fs can be ext4dev +obj-$(CONFIG_EXT4_FS) += ext4/ # Before ext2 so root fs can be ext4 obj-$(CONFIG_JBD) += jbd/ obj-$(CONFIG_JBD2) += jbd2/ obj-$(CONFIG_EXT2_FS) += ext2/ diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c index bd2ece228827..b9821be709bd 100644 --- a/fs/ext4/balloc.c +++ b/fs/ext4/balloc.c @@ -568,8 +568,16 @@ void ext4_free_blocks(handle_t *handle, struct inode *inode, /* this isn't the right place to decide whether block is metadata * inode.c/extents.c knows better, but for safety ... */ - if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode) || - ext4_should_journal_data(inode)) + if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode)) + metadata = 1; + + /* We need to make sure we don't reuse + * block released untill the transaction commit. + * writeback mode have weak data consistency so + * don't force data as metadata when freeing block + * for writeback mode. + */ + if (metadata == 0 && !ext4_should_writeback_data(inode)) metadata = 1; sb = inode->i_sb; diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 6690a41cdd9f..4880cc3e6727 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -511,7 +511,6 @@ do { \ /* * Mount flags */ -#define EXT4_MOUNT_CHECK 0x00001 /* Do mount-time checks */ #define EXT4_MOUNT_OLDALLOC 0x00002 /* Don't use the new Orlov allocator */ #define EXT4_MOUNT_GRPID 0x00004 /* Create files with directory's group */ #define EXT4_MOUNT_DEBUG 0x00008 /* Some debugging messages */ diff --git a/fs/ext4/ext4_sb.h b/fs/ext4/ext4_sb.h index 6a0b40d43264..445fde603df8 100644 --- a/fs/ext4/ext4_sb.h +++ b/fs/ext4/ext4_sb.h @@ -99,9 +99,6 @@ struct ext4_sb_info { struct inode *s_buddy_cache; long s_blocks_reserved; spinlock_t s_reserve_lock; - struct list_head s_active_transaction; - struct list_head s_closed_transaction; - struct list_head s_committed_transaction; spinlock_t s_md_lock; tid_t s_last_transaction; unsigned short *s_mb_offsets, *s_mb_maxs; diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 9b4ec9decfd1..8dbf6953845b 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1648,6 +1648,7 @@ static int mpage_da_submit_io(struct mpage_da_data *mpd) int ret = 0, err, nr_pages, i; unsigned long index, end; struct pagevec pvec; + long pages_skipped; BUG_ON(mpd->next_page <= mpd->first_page); pagevec_init(&pvec, 0); @@ -1655,20 +1656,30 @@ static int mpage_da_submit_io(struct mpage_da_data *mpd) end = mpd->next_page - 1; while (index <= end) { - /* XXX: optimize tail */ - nr_pages = pagevec_lookup(&pvec, mapping, index, PAGEVEC_SIZE); + /* + * We can use PAGECACHE_TAG_DIRTY lookup here because + * even though we have cleared the dirty flag on the page + * We still keep the page in the radix tree with tag + * PAGECACHE_TAG_DIRTY. See clear_page_dirty_for_io. + * The PAGECACHE_TAG_DIRTY is cleared in set_page_writeback + * which is called via the below writepage callback. + */ + nr_pages = pagevec_lookup_tag(&pvec, mapping, &index, + PAGECACHE_TAG_DIRTY, + min(end - index, + (pgoff_t)PAGEVEC_SIZE-1) + 1); if (nr_pages == 0) break; for (i = 0; i < nr_pages; i++) { struct page *page = pvec.pages[i]; - index = page->index; - if (index > end) - break; - index++; - + pages_skipped = mpd->wbc->pages_skipped; err = mapping->a_ops->writepage(page, mpd->wbc); - if (!err) + if (!err && (pages_skipped == mpd->wbc->pages_skipped)) + /* + * have successfully written the page + * without skipping the same + */ mpd->pages_written++; /* * In error case, we have to continue because @@ -2104,7 +2115,6 @@ static int mpage_da_writepages(struct address_space *mapping, struct writeback_control *wbc, struct mpage_da_data *mpd) { - long to_write; int ret; if (!mpd->get_block) @@ -2119,19 +2129,18 @@ static int mpage_da_writepages(struct address_space *mapping, mpd->pages_written = 0; mpd->retval = 0; - to_write = wbc->nr_to_write; - ret = write_cache_pages(mapping, wbc, __mpage_da_writepage, mpd); - /* * Handle last extent of pages */ if (!mpd->io_done && mpd->next_page != mpd->first_page) { if (mpage_da_map_blocks(mpd) == 0) mpage_da_submit_io(mpd); - } - wbc->nr_to_write = to_write - mpd->pages_written; + mpd->io_done = 1; + ret = MPAGE_DA_EXTENT_TAIL; + } + wbc->nr_to_write -= mpd->pages_written; return ret; } @@ -2360,12 +2369,14 @@ static int ext4_da_writepages_trans_blocks(struct inode *inode) static int ext4_da_writepages(struct address_space *mapping, struct writeback_control *wbc) { + pgoff_t index; + int range_whole = 0; handle_t *handle = NULL; - loff_t range_start = 0; struct mpage_da_data mpd; struct inode *inode = mapping->host; + int no_nrwrite_index_update; + long pages_written = 0, pages_skipped; int needed_blocks, ret = 0, nr_to_writebump = 0; - long to_write, pages_skipped = 0; struct ext4_sb_info *sbi = EXT4_SB(mapping->host->i_sb); /* @@ -2385,23 +2396,26 @@ static int ext4_da_writepages(struct address_space *mapping, nr_to_writebump = sbi->s_mb_stream_request - wbc->nr_to_write; wbc->nr_to_write = sbi->s_mb_stream_request; } + if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX) + range_whole = 1; - if (!wbc->range_cyclic) - /* - * If range_cyclic is not set force range_cont - * and save the old writeback_index - */ - wbc->range_cont = 1; - - range_start = wbc->range_start; - pages_skipped = wbc->pages_skipped; + if (wbc->range_cyclic) + index = mapping->writeback_index; + else + index = wbc->range_start >> PAGE_CACHE_SHIFT; mpd.wbc = wbc; mpd.inode = mapping->host; -restart_loop: - to_write = wbc->nr_to_write; - while (!ret && to_write > 0) { + /* + * we don't want write_cache_pages to update + * nr_to_write and writeback_index + */ + no_nrwrite_index_update = wbc->no_nrwrite_index_update; + wbc->no_nrwrite_index_update = 1; + pages_skipped = wbc->pages_skipped; + + while (!ret && wbc->nr_to_write > 0) { /* * we insert one extent at a time. So we need @@ -2422,48 +2436,53 @@ restart_loop: dump_stack(); goto out_writepages; } - to_write -= wbc->nr_to_write; - mpd.get_block = ext4_da_get_block_write; ret = mpage_da_writepages(mapping, wbc, &mpd); ext4_journal_stop(handle); - if (mpd.retval == -ENOSPC) + if (mpd.retval == -ENOSPC) { + /* commit the transaction which would + * free blocks released in the transaction + * and try again + */ jbd2_journal_force_commit_nested(sbi->s_journal); - - /* reset the retry count */ - if (ret == MPAGE_DA_EXTENT_TAIL) { + wbc->pages_skipped = pages_skipped; + ret = 0; + } else if (ret == MPAGE_DA_EXTENT_TAIL) { /* * got one extent now try with * rest of the pages */ - to_write += wbc->nr_to_write; + pages_written += mpd.pages_written; + wbc->pages_skipped = pages_skipped; ret = 0; - } else if (wbc->nr_to_write) { + } else if (wbc->nr_to_write) /* * There is no more writeout needed * or we requested for a noblocking writeout * and we found the device congested */ - to_write += wbc->nr_to_write; break; - } - wbc->nr_to_write = to_write; - } - - if (wbc->range_cont && (pages_skipped != wbc->pages_skipped)) { - /* We skipped pages in this loop */ - wbc->range_start = range_start; - wbc->nr_to_write = to_write + - wbc->pages_skipped - pages_skipped; - wbc->pages_skipped = pages_skipped; - goto restart_loop; } + if (pages_skipped != wbc->pages_skipped) + printk(KERN_EMERG "This should not happen leaving %s " + "with nr_to_write = %ld ret = %d\n", + __func__, wbc->nr_to_write, ret); + + /* Update index */ + index += pages_written; + if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0)) + /* + * set the writeback_index so that range_cyclic + * mode will write it back later + */ + mapping->writeback_index = index; out_writepages: - wbc->nr_to_write = to_write - nr_to_writebump; - wbc->range_start = range_start; + if (!no_nrwrite_index_update) + wbc->no_nrwrite_index_update = 0; + wbc->nr_to_write -= nr_to_writebump; return ret; } @@ -4175,7 +4194,6 @@ static int ext4_inode_blocks_set(handle_t *handle, struct inode *inode = &(ei->vfs_inode); u64 i_blocks = inode->i_blocks; struct super_block *sb = inode->i_sb; - int err = 0; if (i_blocks <= ~0U) { /* @@ -4185,36 +4203,27 @@ static int ext4_inode_blocks_set(handle_t *handle, raw_inode->i_blocks_lo = cpu_to_le32(i_blocks); raw_inode->i_blocks_high = 0; ei->i_flags &= ~EXT4_HUGE_FILE_FL; - } else if (i_blocks <= 0xffffffffffffULL) { + return 0; + } + if (!EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_HUGE_FILE)) + return -EFBIG; + + if (i_blocks <= 0xffffffffffffULL) { /* * i_blocks can be represented in a 48 bit variable * as multiple of 512 bytes */ - err = ext4_update_rocompat_feature(handle, sb, - EXT4_FEATURE_RO_COMPAT_HUGE_FILE); - if (err) - goto err_out; - /* i_block is stored in the split 48 bit fields */ raw_inode->i_blocks_lo = cpu_to_le32(i_blocks); raw_inode->i_blocks_high = cpu_to_le16(i_blocks >> 32); ei->i_flags &= ~EXT4_HUGE_FILE_FL; } else { - /* - * i_blocks should be represented in a 48 bit variable - * as multiple of file system block size - */ - err = ext4_update_rocompat_feature(handle, sb, - EXT4_FEATURE_RO_COMPAT_HUGE_FILE); - if (err) - goto err_out; ei->i_flags |= EXT4_HUGE_FILE_FL; /* i_block is stored in file system block size */ i_blocks = i_blocks >> (inode->i_blkbits - 9); raw_inode->i_blocks_lo = cpu_to_le32(i_blocks); raw_inode->i_blocks_high = cpu_to_le16(i_blocks >> 32); } -err_out: - return err; + return 0; } /* diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index b580714f0d85..dfe17a134052 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -2300,6 +2300,7 @@ int ext4_mb_add_groupinfo(struct super_block *sb, ext4_group_t group, } INIT_LIST_HEAD(&meta_group_info[i]->bb_prealloc_list); + meta_group_info[i]->bb_free_root.rb_node = NULL;; #ifdef DOUBLE_CHECK { @@ -2522,9 +2523,6 @@ int ext4_mb_init(struct super_block *sb, int needs_recovery) } spin_lock_init(&sbi->s_md_lock); - INIT_LIST_HEAD(&sbi->s_active_transaction); - INIT_LIST_HEAD(&sbi->s_closed_transaction); - INIT_LIST_HEAD(&sbi->s_committed_transaction); spin_lock_init(&sbi->s_bal_lock); sbi->s_mb_max_to_scan = MB_DEFAULT_MAX_TO_SCAN; @@ -2553,6 +2551,8 @@ int ext4_mb_init(struct super_block *sb, int needs_recovery) ext4_mb_init_per_dev_proc(sb); ext4_mb_history_init(sb); + sbi->s_journal->j_commit_callback = release_blocks_on_commit; + printk(KERN_INFO "EXT4-fs: mballoc enabled\n"); return 0; } @@ -2568,7 +2568,7 @@ static void ext4_mb_cleanup_pa(struct ext4_group_info *grp) pa = list_entry(cur, struct ext4_prealloc_space, pa_group_list); list_del(&pa->pa_group_list); count++; - kfree(pa); + kmem_cache_free(ext4_pspace_cachep, pa); } if (count) mb_debug("mballoc: %u PAs left\n", count); @@ -2582,15 +2582,6 @@ int ext4_mb_release(struct super_block *sb) struct ext4_group_info *grinfo; struct ext4_sb_info *sbi = EXT4_SB(sb); - /* release freed, non-committed blocks */ - spin_lock(&sbi->s_md_lock); - list_splice_init(&sbi->s_closed_transaction, - &sbi->s_committed_transaction); - list_splice_init(&sbi->s_active_transaction, - &sbi->s_committed_transaction); - spin_unlock(&sbi->s_md_lock); - ext4_mb_free_committed_blocks(sb); - if (sbi->s_group_info) { for (i = 0; i < sbi->s_groups_count; i++) { grinfo = ext4_get_group_info(sb, i); @@ -2644,61 +2635,57 @@ int ext4_mb_release(struct super_block *sb) return 0; } -static noinline_for_stack void -ext4_mb_free_committed_blocks(struct super_block *sb) +/* + * This function is called by the jbd2 layer once the commit has finished, + * so we know we can free the blocks that were released with that commit. + */ +static void release_blocks_on_commit(journal_t *journal, transaction_t *txn) { - struct ext4_sb_info *sbi = EXT4_SB(sb); - int err; - int i; - int count = 0; - int count2 = 0; - struct ext4_free_metadata *md; + struct super_block *sb = journal->j_private; struct ext4_buddy e4b; + struct ext4_group_info *db; + int err, count = 0, count2 = 0; + struct ext4_free_data *entry; + ext4_fsblk_t discard_block; + struct list_head *l, *ltmp; - if (list_empty(&sbi->s_committed_transaction)) - return; - - /* there is committed blocks to be freed yet */ - do { - /* get next array of blocks */ - md = NULL; - spin_lock(&sbi->s_md_lock); - if (!list_empty(&sbi->s_committed_transaction)) { - md = list_entry(sbi->s_committed_transaction.next, - struct ext4_free_metadata, list); - list_del(&md->list); - } - spin_unlock(&sbi->s_md_lock); - - if (md == NULL) - break; + list_for_each_safe(l, ltmp, &txn->t_private_list) { + entry = list_entry(l, struct ext4_free_data, list); mb_debug("gonna free %u blocks in group %lu (0x%p):", - md->num, md->group, md); + entry->count, entry->group, entry); - err = ext4_mb_load_buddy(sb, md->group, &e4b); + err = ext4_mb_load_buddy(sb, entry->group, &e4b); /* we expect to find existing buddy because it's pinned */ BUG_ON(err != 0); + db = e4b.bd_info; /* there are blocks to put in buddy to make them really free */ - count += md->num; + count += entry->count; count2++; - ext4_lock_group(sb, md->group); - for (i = 0; i < md->num; i++) { - mb_debug(" %u", md->blocks[i]); - mb_free_blocks(NULL, &e4b, md->blocks[i], 1); + ext4_lock_group(sb, entry->group); + /* Take it out of per group rb tree */ + rb_erase(&entry->node, &(db->bb_free_root)); + mb_free_blocks(NULL, &e4b, entry->start_blk, entry->count); + + if (!db->bb_free_root.rb_node) { + /* No more items in the per group rb tree + * balance refcounts from ext4_mb_free_metadata() + */ + page_cache_release(e4b.bd_buddy_page); + page_cache_release(e4b.bd_bitmap_page); } - mb_debug("\n"); - ext4_unlock_group(sb, md->group); - - /* balance refcounts from ext4_mb_free_metadata() */ - page_cache_release(e4b.bd_buddy_page); - page_cache_release(e4b.bd_bitmap_page); - - kfree(md); + ext4_unlock_group(sb, entry->group); + discard_block = (ext4_fsblk_t) entry->group * EXT4_BLOCKS_PER_GROUP(sb) + + entry->start_blk + + le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block); + trace_mark(ext4_discard_blocks, "dev %s blk %llu count %u", sb->s_id, + (unsigned long long) discard_block, entry->count); + sb_issue_discard(sb, discard_block, entry->count); + + kmem_cache_free(ext4_free_ext_cachep, entry); ext4_mb_release_desc(&e4b); - - } while (md); + } mb_debug("freed %u blocks in %u structures\n", count, count2); } @@ -2712,6 +2699,7 @@ ext4_mb_free_committed_blocks(struct super_block *sb) static int ext4_mb_init_per_dev_proc(struct super_block *sb) { +#ifdef CONFIG_PROC_FS mode_t mode = S_IFREG | S_IRUGO | S_IWUSR; struct ext4_sb_info *sbi = EXT4_SB(sb); struct proc_dir_entry *proc; @@ -2735,10 +2723,14 @@ err_out: remove_proc_entry(EXT4_MB_MAX_TO_SCAN_NAME, sbi->s_proc); remove_proc_entry(EXT4_MB_STATS_NAME, sbi->s_proc); return -ENOMEM; +#else + return 0; +#endif } static int ext4_mb_destroy_per_dev_proc(struct super_block *sb) { +#ifdef CONFIG_PROC_FS struct ext4_sb_info *sbi = EXT4_SB(sb); if (sbi->s_proc == NULL) @@ -2750,7 +2742,7 @@ static int ext4_mb_destroy_per_dev_proc(struct super_block *sb) remove_proc_entry(EXT4_MB_MIN_TO_SCAN_NAME, sbi->s_proc); remove_proc_entry(EXT4_MB_MAX_TO_SCAN_NAME, sbi->s_proc); remove_proc_entry(EXT4_MB_STATS_NAME, sbi->s_proc); - +#endif return 0; } @@ -2771,6 +2763,16 @@ int __init init_ext4_mballoc(void) kmem_cache_destroy(ext4_pspace_cachep); return -ENOMEM; } + + ext4_free_ext_cachep = + kmem_cache_create("ext4_free_block_extents", + sizeof(struct ext4_free_data), + 0, SLAB_RECLAIM_ACCOUNT, NULL); + if (ext4_free_ext_cachep == NULL) { + kmem_cache_destroy(ext4_pspace_cachep); + kmem_cache_destroy(ext4_ac_cachep); + return -ENOMEM; + } return 0; } @@ -2779,6 +2781,7 @@ void exit_ext4_mballoc(void) /* XXX: synchronize_rcu(); */ kmem_cache_destroy(ext4_pspace_cachep); kmem_cache_destroy(ext4_ac_cachep); + kmem_cache_destroy(ext4_free_ext_cachep); } @@ -4324,8 +4327,6 @@ ext4_fsblk_t ext4_mb_new_blocks(handle_t *handle, goto out1; } - ext4_mb_poll_new_transaction(sb, handle); - *errp = ext4_mb_initialize_context(ac, ar); if (*errp) { ar->len = 0; @@ -4384,35 +4385,20 @@ out1: return block; } -static void ext4_mb_poll_new_transaction(struct super_block *sb, - handle_t *handle) -{ - struct ext4_sb_info *sbi = EXT4_SB(sb); - - if (sbi->s_last_transaction == handle->h_transaction->t_tid) - return; - - /* new transaction! time to close last one and free blocks for - * committed transaction. we know that only transaction can be - * active, so previos transaction can be being logged and we - * know that transaction before previous is known to be already - * logged. this means that now we may free blocks freed in all - * transactions before previous one. hope I'm clear enough ... */ - spin_lock(&sbi->s_md_lock); - if (sbi->s_last_transaction != handle->h_transaction->t_tid) { - mb_debug("new transaction %lu, old %lu\n", - (unsigned long) handle->h_transaction->t_tid, - (unsigned long) sbi->s_last_transaction); - list_splice_init(&sbi->s_closed_transaction, - &sbi->s_committed_transaction); - list_splice_init(&sbi->s_active_transaction, - &sbi->s_closed_transaction); - sbi->s_last_transaction = handle->h_transaction->t_tid; - } - spin_unlock(&sbi->s_md_lock); - - ext4_mb_free_committed_blocks(sb); +/* + * We can merge two free data extents only if the physical blocks + * are contiguous, AND the extents were freed by the same transaction, + * AND the blocks are associated with the same group. + */ +static int can_merge(struct ext4_free_data *entry1, + struct ext4_free_data *entry2) +{ + if ((entry1->t_tid == entry2->t_tid) && + (entry1->group == entry2->group) && + ((entry1->start_blk + entry1->count) == entry2->start_blk)) + return 1; + return 0; } static noinline_for_stack int @@ -4422,57 +4408,80 @@ ext4_mb_free_metadata(handle_t *handle, struct ext4_buddy *e4b, struct ext4_group_info *db = e4b->bd_info; struct super_block *sb = e4b->bd_sb; struct ext4_sb_info *sbi = EXT4_SB(sb); - struct ext4_free_metadata *md; - int i; + struct ext4_free_data *entry, *new_entry; + struct rb_node **n = &db->bb_free_root.rb_node, *node; + struct rb_node *parent = NULL, *new_node; + BUG_ON(e4b->bd_bitmap_page == NULL); BUG_ON(e4b->bd_buddy_page == NULL); + new_entry = kmem_cache_alloc(ext4_free_ext_cachep, GFP_NOFS); + new_entry->start_blk = block; + new_entry->group = group; + new_entry->count = count; + new_entry->t_tid = handle->h_transaction->t_tid; + new_node = &new_entry->node; + ext4_lock_group(sb, group); - for (i = 0; i < count; i++) { - md = db->bb_md_cur; - if (md && db->bb_tid != handle->h_transaction->t_tid) { - db->bb_md_cur = NULL; - md = NULL; + if (!*n) { + /* first free block exent. We need to + protect buddy cache from being freed, + * otherwise we'll refresh it from + * on-disk bitmap and lose not-yet-available + * blocks */ + page_cache_get(e4b->bd_buddy_page); + page_cache_get(e4b->bd_bitmap_page); + } + while (*n) { + parent = *n; + entry = rb_entry(parent, struct ext4_free_data, node); + if (block < entry->start_blk) + n = &(*n)->rb_left; + else if (block >= (entry->start_blk + entry->count)) + n = &(*n)->rb_right; + else { + ext4_error(sb, __func__, + "Double free of blocks %d (%d %d)\n", + block, entry->start_blk, entry->count); + return 0; } + } - if (md == NULL) { - ext4_unlock_group(sb, group); - md = kmalloc(sizeof(*md), GFP_NOFS); - if (md == NULL) - return -ENOMEM; - md->num = 0; - md->group = group; - - ext4_lock_group(sb, group); - if (db->bb_md_cur == NULL) { - spin_lock(&sbi->s_md_lock); - list_add(&md->list, &sbi->s_active_transaction); - spin_unlock(&sbi->s_md_lock); - /* protect buddy cache from being freed, - * otherwise we'll refresh it from - * on-disk bitmap and lose not-yet-available - * blocks */ - page_cache_get(e4b->bd_buddy_page); - page_cache_get(e4b->bd_bitmap_page); - db->bb_md_cur = md; - db->bb_tid = handle->h_transaction->t_tid; - mb_debug("new md 0x%p for group %lu\n", - md, md->group); - } else { - kfree(md); - md = db->bb_md_cur; - } + rb_link_node(new_node, parent, n); + rb_insert_color(new_node, &db->bb_free_root); + + /* Now try to see the extent can be merged to left and right */ + node = rb_prev(new_node); + if (node) { + entry = rb_entry(node, struct ext4_free_data, node); + if (can_merge(entry, new_entry)) { + new_entry->start_blk = entry->start_blk; + new_entry->count += entry->count; + rb_erase(node, &(db->bb_free_root)); + spin_lock(&sbi->s_md_lock); + list_del(&entry->list); + spin_unlock(&sbi->s_md_lock); + kmem_cache_free(ext4_free_ext_cachep, entry); } + } - BUG_ON(md->num >= EXT4_BB_MAX_BLOCKS); - md->blocks[md->num] = block + i; - md->num++; - if (md->num == EXT4_BB_MAX_BLOCKS) { - /* no more space, put full container on a sb's list */ - db->bb_md_cur = NULL; + node = rb_next(new_node); + if (node) { + entry = rb_entry(node, struct ext4_free_data, node); + if (can_merge(new_entry, entry)) { + new_entry->count += entry->count; + rb_erase(node, &(db->bb_free_root)); + spin_lock(&sbi->s_md_lock); + list_del(&entry->list); + spin_unlock(&sbi->s_md_lock); + kmem_cache_free(ext4_free_ext_cachep, entry); } } + /* Add the extent to transaction's private list */ + spin_lock(&sbi->s_md_lock); + list_add(&new_entry->list, &handle->h_transaction->t_private_list); + spin_unlock(&sbi->s_md_lock); ext4_unlock_group(sb, group); return 0; } @@ -4500,8 +4509,6 @@ void ext4_mb_free_blocks(handle_t *handle, struct inode *inode, *freed = 0; - ext4_mb_poll_new_transaction(sb, handle); - sbi = EXT4_SB(sb); es = EXT4_SB(sb)->s_es; if (block < le32_to_cpu(es->s_first_data_block) || diff --git a/fs/ext4/mballoc.h b/fs/ext4/mballoc.h index b3b4828f8b89..b5dff1fff1e5 100644 --- a/fs/ext4/mballoc.h +++ b/fs/ext4/mballoc.h @@ -18,6 +18,8 @@ #include <linux/pagemap.h> #include <linux/seq_file.h> #include <linux/version.h> +#include <linux/blkdev.h> +#include <linux/marker.h> #include "ext4_jbd2.h" #include "ext4.h" #include "group.h" @@ -98,23 +100,29 @@ static struct kmem_cache *ext4_pspace_cachep; static struct kmem_cache *ext4_ac_cachep; +static struct kmem_cache *ext4_free_ext_cachep; -#ifdef EXT4_BB_MAX_BLOCKS -#undef EXT4_BB_MAX_BLOCKS -#endif -#define EXT4_BB_MAX_BLOCKS 30 +struct ext4_free_data { + /* this links the free block information from group_info */ + struct rb_node node; -struct ext4_free_metadata { - ext4_group_t group; - unsigned short num; - ext4_grpblk_t blocks[EXT4_BB_MAX_BLOCKS]; + /* this links the free block information from ext4_sb_info */ struct list_head list; + + /* group which free block extent belongs */ + ext4_group_t group; + + /* free block extent */ + ext4_grpblk_t start_blk; + ext4_grpblk_t count; + + /* transaction which freed this extent */ + tid_t t_tid; }; struct ext4_group_info { unsigned long bb_state; - unsigned long bb_tid; - struct ext4_free_metadata *bb_md_cur; + struct rb_root bb_free_root; unsigned short bb_first_free; unsigned short bb_free; unsigned short bb_fragments; @@ -261,8 +269,6 @@ struct buffer_head *read_block_bitmap(struct super_block *, ext4_group_t); static void ext4_mb_generate_from_pa(struct super_block *sb, void *bitmap, ext4_group_t group); -static void ext4_mb_poll_new_transaction(struct super_block *, handle_t *); -static void ext4_mb_free_committed_blocks(struct super_block *); static void ext4_mb_return_to_preallocation(struct inode *inode, struct ext4_buddy *e4b, sector_t block, int count); @@ -270,6 +276,7 @@ static void ext4_mb_put_pa(struct ext4_allocation_context *, struct super_block *, struct ext4_prealloc_space *pa); static int ext4_mb_init_per_dev_proc(struct super_block *sb); static int ext4_mb_destroy_per_dev_proc(struct super_block *sb); +static void release_blocks_on_commit(journal_t *journal, transaction_t *txn); static inline void ext4_lock_group(struct super_block *sb, ext4_group_t group) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index dea8f13c2fd9..9b2b2bc4ec17 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -374,66 +374,6 @@ void ext4_update_dynamic_rev(struct super_block *sb) */ } -int ext4_update_compat_feature(handle_t *handle, - struct super_block *sb, __u32 compat) -{ - int err = 0; - if (!EXT4_HAS_COMPAT_FEATURE(sb, compat)) { - err = ext4_journal_get_write_access(handle, - EXT4_SB(sb)->s_sbh); - if (err) - return err; - EXT4_SET_COMPAT_FEATURE(sb, compat); - sb->s_dirt = 1; - handle->h_sync = 1; - BUFFER_TRACE(EXT4_SB(sb)->s_sbh, - "call ext4_journal_dirty_met adata"); - err = ext4_journal_dirty_metadata(handle, - EXT4_SB(sb)->s_sbh); - } - return err; -} - -int ext4_update_rocompat_feature(handle_t *handle, - struct super_block *sb, __u32 rocompat) -{ - int err = 0; - if (!EXT4_HAS_RO_COMPAT_FEATURE(sb, rocompat)) { - err = ext4_journal_get_write_access(handle, - EXT4_SB(sb)->s_sbh); - if (err) - return err; - EXT4_SET_RO_COMPAT_FEATURE(sb, rocompat); - sb->s_dirt = 1; - handle->h_sync = 1; - BUFFER_TRACE(EXT4_SB(sb)->s_sbh, - "call ext4_journal_dirty_met adata"); - err = ext4_journal_dirty_metadata(handle, - EXT4_SB(sb)->s_sbh); - } - return err; -} - -int ext4_update_incompat_feature(handle_t *handle, - struct super_block *sb, __u32 incompat) -{ - int err = 0; - if (!EXT4_HAS_INCOMPAT_FEATURE(sb, incompat)) { - err = ext4_journal_get_write_access(handle, - EXT4_SB(sb)->s_sbh); - if (err) - return err; - EXT4_SET_INCOMPAT_FEATURE(sb, incompat); - sb->s_dirt = 1; - handle->h_sync = 1; - BUFFER_TRACE(EXT4_SB(sb)->s_sbh, - "call ext4_journal_dirty_met adata"); - err = ext4_journal_dirty_metadata(handle, - EXT4_SB(sb)->s_sbh); - } - return err; -} - /* * Open the external journal device */ @@ -904,7 +844,7 @@ static const struct export_operations ext4_export_ops = { enum { Opt_bsd_df, Opt_minix_df, Opt_grpid, Opt_nogrpid, Opt_resgid, Opt_resuid, Opt_sb, Opt_err_cont, Opt_err_panic, Opt_err_ro, - Opt_nouid32, Opt_nocheck, Opt_debug, Opt_oldalloc, Opt_orlov, + Opt_nouid32, Opt_debug, Opt_oldalloc, Opt_orlov, Opt_user_xattr, Opt_nouser_xattr, Opt_acl, Opt_noacl, Opt_reservation, Opt_noreservation, Opt_noload, Opt_nobh, Opt_bh, Opt_commit, Opt_journal_update, Opt_journal_inum, Opt_journal_dev, @@ -915,7 +855,7 @@ enum { Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_quota, Opt_noquota, Opt_ignore, Opt_barrier, Opt_err, Opt_resize, Opt_usrquota, Opt_grpquota, Opt_extents, Opt_noextents, Opt_i_version, - Opt_mballoc, Opt_nomballoc, Opt_stripe, Opt_delalloc, Opt_nodelalloc, + Opt_stripe, Opt_delalloc, Opt_nodelalloc, Opt_inode_readahead_blks }; @@ -933,8 +873,6 @@ static const match_table_t tokens = { {Opt_err_panic, "errors=panic"}, {Opt_err_ro, "errors=remount-ro"}, {Opt_nouid32, "nouid32"}, - {Opt_nocheck, "nocheck"}, - {Opt_nocheck, "check=none"}, {Opt_debug, "debug"}, {Opt_oldalloc, "oldalloc"}, {Opt_orlov, "orlov"}, @@ -973,8 +911,6 @@ static const match_table_t tokens = { {Opt_extents, "extents"}, {Opt_noextents, "noextents"}, {Opt_i_version, "i_version"}, - {Opt_mballoc, "mballoc"}, - {Opt_nomballoc, "nomballoc"}, {Opt_stripe, "stripe=%u"}, {Opt_resize, "resize"}, {Opt_delalloc, "delalloc"}, @@ -1073,9 +1009,6 @@ static int parse_options(char *options, struct super_block *sb, case Opt_nouid32: set_opt(sbi->s_mount_opt, NO_UID32); break; - case Opt_nocheck: - clear_opt(sbi->s_mount_opt, CHECK); - break; case Opt_debug: set_opt(sbi->s_mount_opt, DEBUG); break; @@ -1618,14 +1551,14 @@ static int ext4_check_descriptors(struct super_block *sb) if (block_bitmap < first_block || block_bitmap > last_block) { printk(KERN_ERR "EXT4-fs: ext4_check_descriptors: " "Block bitmap for group %lu not in group " - "(block %llu)!", i, block_bitmap); + "(block %llu)!\n", i, block_bitmap); return 0; } inode_bitmap = ext4_inode_bitmap(sb, gdp); if (inode_bitmap < first_block || inode_bitmap > last_block) { printk(KERN_ERR "EXT4-fs: ext4_check_descriptors: " "Inode bitmap for group %lu not in group " - "(block %llu)!", i, inode_bitmap); + "(block %llu)!\n", i, inode_bitmap); return 0; } inode_table = ext4_inode_table(sb, gdp); @@ -1633,7 +1566,7 @@ static int ext4_check_descriptors(struct super_block *sb) inode_table + sbi->s_itb_per_group - 1 > last_block) { printk(KERN_ERR "EXT4-fs: ext4_check_descriptors: " "Inode table for group %lu not in group " - "(block %llu)!", i, inode_table); + "(block %llu)!\n", i, inode_table); return 0; } spin_lock(sb_bgl_lock(sbi, i)); @@ -1778,13 +1711,13 @@ static void ext4_orphan_cleanup(struct super_block *sb, * * Note, this does *not* consider any metadata overhead for vfs i_blocks. */ -static loff_t ext4_max_size(int blkbits) +static loff_t ext4_max_size(int blkbits, int has_huge_files) { loff_t res; loff_t upper_limit = MAX_LFS_FILESIZE; /* small i_blocks in vfs inode? */ - if (sizeof(blkcnt_t) < sizeof(u64)) { + if (!has_huge_files || sizeof(blkcnt_t) < sizeof(u64)) { /* * CONFIG_LSF is not enabled implies the inode * i_block represent total blocks in 512 bytes @@ -1814,7 +1747,7 @@ static loff_t ext4_max_size(int blkbits) * block limit, and also a limit of (2^48 - 1) 512-byte sectors in i_blocks. * We need to be 1 filesystem block less than the 2^48 sector limit. */ -static loff_t ext4_max_bitmap_size(int bits) +static loff_t ext4_max_bitmap_size(int bits, int has_huge_files) { loff_t res = EXT4_NDIR_BLOCKS; int meta_blocks; @@ -1827,11 +1760,11 @@ static loff_t ext4_max_bitmap_size(int bits) * total number of 512 bytes blocks of the file */ - if (sizeof(blkcnt_t) < sizeof(u64)) { + if (!has_huge_files || sizeof(blkcnt_t) < sizeof(u64)) { /* - * CONFIG_LSF is not enabled implies the inode - * i_block represent total blocks in 512 bytes - * 32 == size of vfs inode i_blocks * 8 + * !has_huge_files or CONFIG_LSF is not enabled + * implies the inode i_block represent total blocks in + * 512 bytes 32 == size of vfs inode i_blocks * 8 */ upper_limit = (1LL << 32) - 1; @@ -1940,7 +1873,7 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) int blocksize; int db_count; int i; - int needs_recovery; + int needs_recovery, has_huge_files; __le32 features; __u64 blocks_count; int err; @@ -2081,7 +2014,9 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) sb->s_id, le32_to_cpu(features)); goto failed_mount; } - if (EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_HUGE_FILE)) { + has_huge_files = EXT4_HAS_RO_COMPAT_FEATURE(sb, + EXT4_FEATURE_RO_COMPAT_HUGE_FILE); + if (has_huge_files) { /* * Large file size enabled file system can only be * mount if kernel is build with CONFIG_LSF @@ -2131,8 +2066,9 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) } } - sbi->s_bitmap_maxbytes = ext4_max_bitmap_size(sb->s_blocksize_bits); - sb->s_maxbytes = ext4_max_size(sb->s_blocksize_bits); + sbi->s_bitmap_maxbytes = ext4_max_bitmap_size(sb->s_blocksize_bits, + has_huge_files); + sb->s_maxbytes = ext4_max_size(sb->s_blocksize_bits, has_huge_files); if (le32_to_cpu(es->s_rev_level) == EXT4_GOOD_OLD_REV) { sbi->s_inode_size = EXT4_GOOD_OLD_INODE_SIZE; @@ -2456,6 +2392,21 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) "available.\n"); } + if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) { + printk(KERN_WARNING "EXT4-fs: Ignoring delalloc option - " + "requested data journaling mode\n"); + clear_opt(sbi->s_mount_opt, DELALLOC); + } else if (test_opt(sb, DELALLOC)) + printk(KERN_INFO "EXT4-fs: delayed allocation enabled\n"); + + ext4_ext_init(sb); + err = ext4_mb_init(sb, needs_recovery); + if (err) { + printk(KERN_ERR "EXT4-fs: failed to initalize mballoc (%d)\n", + err); + goto failed_mount4; + } + /* * akpm: core read_super() calls in here with the superblock locked. * That deadlocks, because orphan cleanup needs to lock the superblock @@ -2475,21 +2426,6 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_ORDERED_DATA ? "ordered": "writeback"); - if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) { - printk(KERN_WARNING "EXT4-fs: Ignoring delalloc option - " - "requested data journaling mode\n"); - clear_opt(sbi->s_mount_opt, DELALLOC); - } else if (test_opt(sb, DELALLOC)) - printk(KERN_INFO "EXT4-fs: delayed allocation enabled\n"); - - ext4_ext_init(sb); - err = ext4_mb_init(sb, needs_recovery); - if (err) { - printk(KERN_ERR "EXT4-fs: failed to initalize mballoc (%d)\n", - err); - goto failed_mount4; - } - lock_kernel(); return 0; diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index 0abe02c4242a..8b119e16aa36 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -995,6 +995,9 @@ restart_loop: } spin_unlock(&journal->j_list_lock); + if (journal->j_commit_callback) + journal->j_commit_callback(journal, commit_transaction); + trace_mark(jbd2_end_commit, "dev %s transaction %d head %d", journal->j_devname, commit_transaction->t_tid, journal->j_tail_sequence); diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c index e5d540588fa9..39b7805a599a 100644 --- a/fs/jbd2/transaction.c +++ b/fs/jbd2/transaction.c @@ -52,6 +52,7 @@ jbd2_get_transaction(journal_t *journal, transaction_t *transaction) transaction->t_expires = jiffies + journal->j_commit_interval; spin_lock_init(&transaction->t_handle_lock); INIT_LIST_HEAD(&transaction->t_inode_list); + INIT_LIST_HEAD(&transaction->t_private_list); /* Set up the commit timer for the new transaction. */ journal->j_commit_timer.expires = round_jiffies(transaction->t_expires); diff --git a/include/drm/drm.h b/include/drm/drm.h index 38d3c6b8276a..f46ba4b57da4 100644 --- a/include/drm/drm.h +++ b/include/drm/drm.h @@ -36,7 +36,6 @@ #ifndef _DRM_H_ #define _DRM_H_ -#if defined(__linux__) #if defined(__KERNEL__) #endif #include <asm/ioctl.h> /* For _IO* macros */ @@ -46,22 +45,6 @@ #define DRM_IOC_WRITE _IOC_WRITE #define DRM_IOC_READWRITE _IOC_READ|_IOC_WRITE #define DRM_IOC(dir, group, nr, size) _IOC(dir, group, nr, size) -#elif defined(__FreeBSD__) || defined(__NetBSD__) || defined(__OpenBSD__) -#if defined(__FreeBSD__) && defined(IN_MODULE) -/* Prevent name collision when including sys/ioccom.h */ -#undef ioctl -#include <sys/ioccom.h> -#define ioctl(a,b,c) xf86ioctl(a,b,c) -#else -#include <sys/ioccom.h> -#endif /* __FreeBSD__ && xf86ioctl */ -#define DRM_IOCTL_NR(n) ((n) & 0xff) -#define DRM_IOC_VOID IOC_VOID -#define DRM_IOC_READ IOC_OUT -#define DRM_IOC_WRITE IOC_IN -#define DRM_IOC_READWRITE IOC_INOUT -#define DRM_IOC(dir, group, nr, size) _IOC(dir, group, nr, size) -#endif #define DRM_MAJOR 226 #define DRM_MAX_MINOR 15 @@ -471,6 +454,7 @@ struct drm_irq_busid { enum drm_vblank_seq_type { _DRM_VBLANK_ABSOLUTE = 0x0, /**< Wait for specific vblank sequence number */ _DRM_VBLANK_RELATIVE = 0x1, /**< Wait for given number of vblanks */ + _DRM_VBLANK_FLIP = 0x8000000, /**< Scheduled buffer swap should flip */ _DRM_VBLANK_NEXTONMISS = 0x10000000, /**< If missed, wait for next vblank */ _DRM_VBLANK_SECONDARY = 0x20000000, /**< Secondary display controller */ _DRM_VBLANK_SIGNAL = 0x40000000 /**< Send signal instead of blocking */ @@ -503,6 +487,19 @@ union drm_wait_vblank { struct drm_wait_vblank_reply reply; }; +#define _DRM_PRE_MODESET 1 +#define _DRM_POST_MODESET 2 + +/** + * DRM_IOCTL_MODESET_CTL ioctl argument type + * + * \sa drmModesetCtl(). + */ +struct drm_modeset_ctl { + uint32_t crtc; + uint32_t cmd; +}; + /** * DRM_IOCTL_AGP_ENABLE ioctl argument type. * @@ -573,6 +570,34 @@ struct drm_set_version { int drm_dd_minor; }; +/** DRM_IOCTL_GEM_CLOSE ioctl argument type */ +struct drm_gem_close { + /** Handle of the object to be closed. */ + uint32_t handle; + uint32_t pad; +}; + +/** DRM_IOCTL_GEM_FLINK ioctl argument type */ +struct drm_gem_flink { + /** Handle for the object being named */ + uint32_t handle; + + /** Returned global name */ + uint32_t name; +}; + +/** DRM_IOCTL_GEM_OPEN ioctl argument type */ +struct drm_gem_open { + /** Name of object being opened */ + uint32_t name; + + /** Returned handle for the object */ + uint32_t handle; + + /** Returned size of the object */ + uint64_t size; +}; + #define DRM_IOCTL_BASE 'd' #define DRM_IO(nr) _IO(DRM_IOCTL_BASE,nr) #define DRM_IOR(nr,type) _IOR(DRM_IOCTL_BASE,nr,type) @@ -587,6 +612,10 @@ struct drm_set_version { #define DRM_IOCTL_GET_CLIENT DRM_IOWR(0x05, struct drm_client) #define DRM_IOCTL_GET_STATS DRM_IOR( 0x06, struct drm_stats) #define DRM_IOCTL_SET_VERSION DRM_IOWR(0x07, struct drm_set_version) +#define DRM_IOCTL_MODESET_CTL DRM_IOW(0x08, struct drm_modeset_ctl) +#define DRM_IOCTL_GEM_CLOSE DRM_IOW (0x09, struct drm_gem_close) +#define DRM_IOCTL_GEM_FLINK DRM_IOWR(0x0a, struct drm_gem_flink) +#define DRM_IOCTL_GEM_OPEN DRM_IOWR(0x0b, struct drm_gem_open) #define DRM_IOCTL_SET_UNIQUE DRM_IOW( 0x10, struct drm_unique) #define DRM_IOCTL_AUTH_MAGIC DRM_IOW( 0x11, struct drm_auth) diff --git a/include/drm/drmP.h b/include/drm/drmP.h index 1c1b13e29223..59c796b46ee7 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -104,6 +104,7 @@ struct drm_device; #define DRIVER_DMA_QUEUE 0x200 #define DRIVER_FB_DMA 0x400 #define DRIVER_IRQ_VBL2 0x800 +#define DRIVER_GEM 0x1000 /***********************************************************************/ /** \name Begin the DRM... */ @@ -387,6 +388,10 @@ struct drm_file { struct drm_minor *minor; int remove_auth_on_close; unsigned long lock_count; + /** Mapping of mm object handles to object pointers. */ + struct idr object_idr; + /** Lock for synchronization of access to object_idr. */ + spinlock_t table_lock; struct file *filp; void *driver_priv; }; @@ -558,6 +563,56 @@ struct drm_ati_pcigart_info { }; /** + * This structure defines the drm_mm memory object, which will be used by the + * DRM for its buffer objects. + */ +struct drm_gem_object { + /** Reference count of this object */ + struct kref refcount; + + /** Handle count of this object. Each handle also holds a reference */ + struct kref handlecount; + + /** Related drm device */ + struct drm_device *dev; + + /** File representing the shmem storage */ + struct file *filp; + + /** + * Size of the object, in bytes. Immutable over the object's + * lifetime. + */ + size_t size; + + /** + * Global name for this object, starts at 1. 0 means unnamed. + * Access is covered by the object_name_lock in the related drm_device + */ + int name; + + /** + * Memory domains. These monitor which caches contain read/write data + * related to the object. When transitioning from one set of domains + * to another, the driver is called to ensure that caches are suitably + * flushed and invalidated + */ + uint32_t read_domains; + uint32_t write_domain; + + /** + * While validating an exec operation, the + * new read/write domain values are computed here. + * They will be transferred to the above values + * at the point that any cache flushing occurs + */ + uint32_t pending_read_domains; + uint32_t pending_write_domain; + + void *driver_private; +}; + +/** * DRM driver structure. This structure represent the common code for * a family of cards. There will one drm_device for each card present * in this family @@ -580,11 +635,54 @@ struct drm_driver { int (*kernel_context_switch) (struct drm_device *dev, int old, int new); void (*kernel_context_switch_unlock) (struct drm_device *dev); - int (*vblank_wait) (struct drm_device *dev, unsigned int *sequence); - int (*vblank_wait2) (struct drm_device *dev, unsigned int *sequence); int (*dri_library_name) (struct drm_device *dev, char *buf); /** + * get_vblank_counter - get raw hardware vblank counter + * @dev: DRM device + * @crtc: counter to fetch + * + * Driver callback for fetching a raw hardware vblank counter + * for @crtc. If a device doesn't have a hardware counter, the + * driver can simply return the value of drm_vblank_count and + * make the enable_vblank() and disable_vblank() hooks into no-ops, + * leaving interrupts enabled at all times. + * + * Wraparound handling and loss of events due to modesetting is dealt + * with in the DRM core code. + * + * RETURNS + * Raw vblank counter value. + */ + u32 (*get_vblank_counter) (struct drm_device *dev, int crtc); + + /** + * enable_vblank - enable vblank interrupt events + * @dev: DRM device + * @crtc: which irq to enable + * + * Enable vblank interrupts for @crtc. If the device doesn't have + * a hardware vblank counter, this routine should be a no-op, since + * interrupts will have to stay on to keep the count accurate. + * + * RETURNS + * Zero on success, appropriate errno if the given @crtc's vblank + * interrupt cannot be enabled. + */ + int (*enable_vblank) (struct drm_device *dev, int crtc); + + /** + * disable_vblank - disable vblank interrupt events + * @dev: DRM device + * @crtc: which irq to enable + * + * Disable vblank interrupts for @crtc. If the device doesn't have + * a hardware vblank counter, this routine should be a no-op, since + * interrupts will have to stay on to keep the count accurate. + */ + void (*disable_vblank) (struct drm_device *dev, int crtc); + + /** * Called by \c drm_device_is_agp. Typically used to determine if a * card is really attached to AGP or not. * @@ -601,7 +699,7 @@ struct drm_driver { irqreturn_t(*irq_handler) (DRM_IRQ_ARGS); void (*irq_preinstall) (struct drm_device *dev); - void (*irq_postinstall) (struct drm_device *dev); + int (*irq_postinstall) (struct drm_device *dev); void (*irq_uninstall) (struct drm_device *dev); void (*reclaim_buffers) (struct drm_device *dev, struct drm_file * file_priv); @@ -614,6 +712,18 @@ struct drm_driver { void (*set_version) (struct drm_device *dev, struct drm_set_version *sv); + int (*proc_init)(struct drm_minor *minor); + void (*proc_cleanup)(struct drm_minor *minor); + + /** + * Driver-specific constructor for drm_gem_objects, to set up + * obj->driver_private. + * + * Returns 0 on success. + */ + int (*gem_init_object) (struct drm_gem_object *obj); + void (*gem_free_object) (struct drm_gem_object *obj); + int major; int minor; int patchlevel; @@ -714,7 +824,6 @@ struct drm_device { /** \name Context support */ /*@{ */ - int irq; /**< Interrupt used by board */ int irq_enabled; /**< True if irq handler is enabled */ __volatile__ long context_flag; /**< Context swapping flag */ __volatile__ long interrupt_flag; /**< Interruption handler flag */ @@ -730,13 +839,28 @@ struct drm_device { /** \name VBLANK IRQ support */ /*@{ */ - wait_queue_head_t vbl_queue; /**< VBLANK wait queue */ - atomic_t vbl_received; - atomic_t vbl_received2; /**< number of secondary VBLANK interrupts */ + /* + * At load time, disabling the vblank interrupt won't be allowed since + * old clients may not call the modeset ioctl and therefore misbehave. + * Once the modeset ioctl *has* been called though, we can safely + * disable them when unused. + */ + int vblank_disable_allowed; + + wait_queue_head_t *vbl_queue; /**< VBLANK wait queue */ + atomic_t *_vblank_count; /**< number of VBLANK interrupts (driver must alloc the right number of counters) */ spinlock_t vbl_lock; - struct list_head vbl_sigs; /**< signal list to send on VBLANK */ - struct list_head vbl_sigs2; /**< signals to send on secondary VBLANK */ - unsigned int vbl_pending; + struct list_head *vbl_sigs; /**< signal list to send on VBLANK */ + atomic_t vbl_signal_pending; /* number of signals pending on all crtcs*/ + atomic_t *vblank_refcount; /* number of users of vblank interruptsper crtc */ + u32 *last_vblank; /* protected by dev->vbl_lock, used */ + /* for wraparound handling */ + int *vblank_enabled; /* so we don't call enable more than + once per disable */ + int *vblank_inmodeset; /* Display driver is setting mode */ + struct timer_list vblank_disable_timer; + + u32 max_vblank_count; /**< size of vblank counter register */ spinlock_t tasklet_lock; /**< For drm_locked_tasklet */ void (*locked_tasklet_func)(struct drm_device *dev); @@ -757,6 +881,7 @@ struct drm_device { struct pci_controller *hose; #endif struct drm_sg_mem *sg; /**< Scatter gather memory */ + int num_crtcs; /**< Number of CRTCs on this device */ void *dev_private; /**< device private data */ struct drm_sigdata sigdata; /**< For block_all_signals */ sigset_t sigmask; @@ -771,8 +896,29 @@ struct drm_device { spinlock_t drw_lock; struct idr drw_idr; /*@} */ + + /** \name GEM information */ + /*@{ */ + spinlock_t object_name_lock; + struct idr object_name_idr; + atomic_t object_count; + atomic_t object_memory; + atomic_t pin_count; + atomic_t pin_memory; + atomic_t gtt_count; + atomic_t gtt_memory; + uint32_t gtt_total; + uint32_t invalidate_domains; /* domains pending invalidation */ + uint32_t flush_domains; /* domains pending flush */ + /*@} */ + }; +static inline int drm_dev_to_irq(struct drm_device *dev) +{ + return dev->pdev->irq; +} + static __inline__ int drm_core_check_feature(struct drm_device *dev, int feature) { @@ -867,6 +1013,11 @@ extern void *drm_realloc(void *oldpt, size_t oldsize, size_t size, int area); extern DRM_AGP_MEM *drm_alloc_agp(struct drm_device *dev, int pages, u32 type); extern int drm_free_agp(DRM_AGP_MEM * handle, int pages); extern int drm_bind_agp(DRM_AGP_MEM * handle, unsigned int start); +extern DRM_AGP_MEM *drm_agp_bind_pages(struct drm_device *dev, + struct page **pages, + unsigned long num_pages, + uint32_t gtt_offset, + uint32_t type); extern int drm_unbind_agp(DRM_AGP_MEM * handle); /* Misc. IOCTL support (drm_ioctl.h) */ @@ -929,6 +1080,9 @@ extern int drm_getmagic(struct drm_device *dev, void *data, extern int drm_authmagic(struct drm_device *dev, void *data, struct drm_file *file_priv); +/* Cache management (drm_cache.c) */ +void drm_clflush_pages(struct page *pages[], unsigned long num_pages); + /* Locking IOCTL support (drm_lock.h) */ extern int drm_lock(struct drm_device *dev, void *data, struct drm_file *file_priv); @@ -985,15 +1139,25 @@ extern void drm_core_reclaim_buffers(struct drm_device *dev, extern int drm_control(struct drm_device *dev, void *data, struct drm_file *file_priv); extern irqreturn_t drm_irq_handler(DRM_IRQ_ARGS); +extern int drm_irq_install(struct drm_device *dev); extern int drm_irq_uninstall(struct drm_device *dev); extern void drm_driver_irq_preinstall(struct drm_device *dev); extern void drm_driver_irq_postinstall(struct drm_device *dev); extern void drm_driver_irq_uninstall(struct drm_device *dev); +extern int drm_vblank_init(struct drm_device *dev, int num_crtcs); extern int drm_wait_vblank(struct drm_device *dev, void *data, - struct drm_file *file_priv); + struct drm_file *filp); extern int drm_vblank_wait(struct drm_device *dev, unsigned int *vbl_seq); -extern void drm_vbl_send_signals(struct drm_device *dev); +extern void drm_locked_tasklet(struct drm_device *dev, + void(*func)(struct drm_device *)); +extern u32 drm_vblank_count(struct drm_device *dev, int crtc); +extern void drm_handle_vblank(struct drm_device *dev, int crtc); +extern int drm_vblank_get(struct drm_device *dev, int crtc); +extern void drm_vblank_put(struct drm_device *dev, int crtc); +/* Modesetting support */ +extern int drm_modeset_ctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); extern void drm_locked_tasklet(struct drm_device *dev, void(*func)(struct drm_device*)); /* AGP/GART support (drm_agpsupport.h) */ @@ -1026,6 +1190,7 @@ extern DRM_AGP_MEM *drm_agp_allocate_memory(struct agp_bridge_data *bridge, size extern int drm_agp_free_memory(DRM_AGP_MEM * handle); extern int drm_agp_bind_memory(DRM_AGP_MEM * handle, off_t start); extern int drm_agp_unbind_memory(DRM_AGP_MEM * handle); +extern void drm_agp_chipset_flush(struct drm_device *dev); /* Stub support (drm_stub.h) */ extern int drm_get_dev(struct pci_dev *pdev, const struct pci_device_id *ent, @@ -1088,6 +1253,66 @@ extern unsigned long drm_mm_tail_space(struct drm_mm *mm); extern int drm_mm_remove_space_from_tail(struct drm_mm *mm, unsigned long size); extern int drm_mm_add_space_to_tail(struct drm_mm *mm, unsigned long size); +/* Graphics Execution Manager library functions (drm_gem.c) */ +int drm_gem_init(struct drm_device *dev); +void drm_gem_object_free(struct kref *kref); +struct drm_gem_object *drm_gem_object_alloc(struct drm_device *dev, + size_t size); +void drm_gem_object_handle_free(struct kref *kref); + +static inline void +drm_gem_object_reference(struct drm_gem_object *obj) +{ + kref_get(&obj->refcount); +} + +static inline void +drm_gem_object_unreference(struct drm_gem_object *obj) +{ + if (obj == NULL) + return; + + kref_put(&obj->refcount, drm_gem_object_free); +} + +int drm_gem_handle_create(struct drm_file *file_priv, + struct drm_gem_object *obj, + int *handlep); + +static inline void +drm_gem_object_handle_reference(struct drm_gem_object *obj) +{ + drm_gem_object_reference(obj); + kref_get(&obj->handlecount); +} + +static inline void +drm_gem_object_handle_unreference(struct drm_gem_object *obj) +{ + if (obj == NULL) + return; + + /* + * Must bump handle count first as this may be the last + * ref, in which case the object would disappear before we + * checked for a name + */ + kref_put(&obj->handlecount, drm_gem_object_handle_free); + drm_gem_object_unreference(obj); +} + +struct drm_gem_object *drm_gem_object_lookup(struct drm_device *dev, + struct drm_file *filp, + int handle); +int drm_gem_close_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +int drm_gem_flink_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +int drm_gem_open_ioctl(struct drm_device *dev, void *data, + struct drm_file *file_priv); +void drm_gem_open(struct drm_device *dev, struct drm_file *file_private); +void drm_gem_release(struct drm_device *dev, struct drm_file *file_private); + extern void drm_core_ioremap(struct drm_map *map, struct drm_device *dev); extern void drm_core_ioremap_wc(struct drm_map *map, struct drm_device *dev); extern void drm_core_ioremapfree(struct drm_map *map, struct drm_device *dev); diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index 135bd19499fc..da04109741e8 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -84,18 +84,18 @@ {0x1002, 0x5462, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \ {0x1002, 0x5464, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \ {0x1002, 0x5657, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x5548, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x5549, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x554A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x554B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x554C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x554D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x554E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x554F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x5550, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x5551, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x5552, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x5554, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x5548, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x5549, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x554A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x554B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x554C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x554D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x554E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x554F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x5550, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x5551, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x5552, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x5554, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \ {0x1002, 0x564A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x564B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x564F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ @@ -113,8 +113,10 @@ {0x1002, 0x5964, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \ {0x1002, 0x5965, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \ {0x1002, 0x5969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \ - {0x1002, 0x5a61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ - {0x1002, 0x5a62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ + {0x1002, 0x5a41, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_IGPGART}, \ + {0x1002, 0x5a42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ + {0x1002, 0x5a61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_IGPGART}, \ + {0x1002, 0x5a62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ {0x1002, 0x5b60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \ {0x1002, 0x5b62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \ {0x1002, 0x5b63, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \ @@ -122,16 +124,16 @@ {0x1002, 0x5b65, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \ {0x1002, 0x5c61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280|RADEON_IS_MOBILITY}, \ {0x1002, 0x5c63, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280|RADEON_IS_MOBILITY}, \ - {0x1002, 0x5d48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x5d49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x5d4a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x5d4c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x5d4d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x5d4e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x5d4f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x5d50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x5d52, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ - {0x1002, 0x5d57, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x5d48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x5d49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x5d4a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x5d4c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x5d4d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x5d4e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x5d4f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x5d50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x5d52, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x5d57, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \ {0x1002, 0x5e48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_NEW_MEMMAP}, \ {0x1002, 0x5e4a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_NEW_MEMMAP}, \ {0x1002, 0x5e4b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_NEW_MEMMAP}, \ @@ -237,6 +239,10 @@ {0x1002, 0x7835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x791e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS690|RADEON_IS_IGP|RADEON_NEW_MEMMAP|RADEON_IS_IGPGART}, \ {0x1002, 0x791f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS690|RADEON_IS_IGP|RADEON_NEW_MEMMAP|RADEON_IS_IGPGART}, \ + {0x1002, 0x796c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS740|RADEON_IS_IGP|RADEON_NEW_MEMMAP|RADEON_IS_IGPGART}, \ + {0x1002, 0x796d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS740|RADEON_IS_IGP|RADEON_NEW_MEMMAP|RADEON_IS_IGPGART}, \ + {0x1002, 0x796e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS740|RADEON_IS_IGP|RADEON_NEW_MEMMAP|RADEON_IS_IGPGART}, \ + {0x1002, 0x796f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS740|RADEON_IS_IGP|RADEON_NEW_MEMMAP|RADEON_IS_IGPGART}, \ {0, 0, 0} #define r128_PCI_IDS \ diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h index 05c66cf03a9e..eb4b35031a55 100644 --- a/include/drm/i915_drm.h +++ b/include/drm/i915_drm.h @@ -143,6 +143,22 @@ typedef struct _drm_i915_sarea { #define DRM_I915_GET_VBLANK_PIPE 0x0e #define DRM_I915_VBLANK_SWAP 0x0f #define DRM_I915_HWS_ADDR 0x11 +#define DRM_I915_GEM_INIT 0x13 +#define DRM_I915_GEM_EXECBUFFER 0x14 +#define DRM_I915_GEM_PIN 0x15 +#define DRM_I915_GEM_UNPIN 0x16 +#define DRM_I915_GEM_BUSY 0x17 +#define DRM_I915_GEM_THROTTLE 0x18 +#define DRM_I915_GEM_ENTERVT 0x19 +#define DRM_I915_GEM_LEAVEVT 0x1a +#define DRM_I915_GEM_CREATE 0x1b +#define DRM_I915_GEM_PREAD 0x1c +#define DRM_I915_GEM_PWRITE 0x1d +#define DRM_I915_GEM_MMAP 0x1e +#define DRM_I915_GEM_SET_DOMAIN 0x1f +#define DRM_I915_GEM_SW_FINISH 0x20 +#define DRM_I915_GEM_SET_TILING 0x21 +#define DRM_I915_GEM_GET_TILING 0x22 #define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t) #define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH) @@ -160,6 +176,20 @@ typedef struct _drm_i915_sarea { #define DRM_IOCTL_I915_SET_VBLANK_PIPE DRM_IOW( DRM_COMMAND_BASE + DRM_I915_SET_VBLANK_PIPE, drm_i915_vblank_pipe_t) #define DRM_IOCTL_I915_GET_VBLANK_PIPE DRM_IOR( DRM_COMMAND_BASE + DRM_I915_GET_VBLANK_PIPE, drm_i915_vblank_pipe_t) #define DRM_IOCTL_I915_VBLANK_SWAP DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_VBLANK_SWAP, drm_i915_vblank_swap_t) +#define DRM_IOCTL_I915_GEM_PIN DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_PIN, struct drm_i915_gem_pin) +#define DRM_IOCTL_I915_GEM_UNPIN DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_UNPIN, struct drm_i915_gem_unpin) +#define DRM_IOCTL_I915_GEM_BUSY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_BUSY, struct drm_i915_gem_busy) +#define DRM_IOCTL_I915_GEM_THROTTLE DRM_IO ( DRM_COMMAND_BASE + DRM_I915_GEM_THROTTLE) +#define DRM_IOCTL_I915_GEM_ENTERVT DRM_IO(DRM_COMMAND_BASE + DRM_I915_GEM_ENTERVT) +#define DRM_IOCTL_I915_GEM_LEAVEVT DRM_IO(DRM_COMMAND_BASE + DRM_I915_GEM_LEAVEVT) +#define DRM_IOCTL_I915_GEM_CREATE DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_CREATE, struct drm_i915_gem_create) +#define DRM_IOCTL_I915_GEM_PREAD DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_PREAD, struct drm_i915_gem_pread) +#define DRM_IOCTL_I915_GEM_PWRITE DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_PWRITE, struct drm_i915_gem_pwrite) +#define DRM_IOCTL_I915_GEM_MMAP DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MMAP, struct drm_i915_gem_mmap) +#define DRM_IOCTL_I915_GEM_SET_DOMAIN DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_SET_DOMAIN, struct drm_i915_gem_set_domain) +#define DRM_IOCTL_I915_GEM_SW_FINISH DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_SW_FINISH, struct drm_i915_gem_sw_finish) +#define DRM_IOCTL_I915_GEM_SET_TILING DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_SET_TILING, struct drm_i915_gem_set_tiling) +#define DRM_IOCTL_I915_GEM_GET_TILING DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_TILING, struct drm_i915_gem_get_tiling) /* Allow drivers to submit batchbuffers directly to hardware, relying * on the security mechanisms provided by hardware. @@ -200,6 +230,8 @@ typedef struct drm_i915_irq_wait { #define I915_PARAM_IRQ_ACTIVE 1 #define I915_PARAM_ALLOW_BATCHBUFFER 2 #define I915_PARAM_LAST_DISPATCH 3 +#define I915_PARAM_CHIPSET_ID 4 +#define I915_PARAM_HAS_GEM 5 typedef struct drm_i915_getparam { int param; @@ -267,4 +299,305 @@ typedef struct drm_i915_hws_addr { uint64_t addr; } drm_i915_hws_addr_t; +struct drm_i915_gem_init { + /** + * Beginning offset in the GTT to be managed by the DRM memory + * manager. + */ + uint64_t gtt_start; + /** + * Ending offset in the GTT to be managed by the DRM memory + * manager. + */ + uint64_t gtt_end; +}; + +struct drm_i915_gem_create { + /** + * Requested size for the object. + * + * The (page-aligned) allocated size for the object will be returned. + */ + uint64_t size; + /** + * Returned handle for the object. + * + * Object handles are nonzero. + */ + uint32_t handle; + uint32_t pad; +}; + +struct drm_i915_gem_pread { + /** Handle for the object being read. */ + uint32_t handle; + uint32_t pad; + /** Offset into the object to read from */ + uint64_t offset; + /** Length of data to read */ + uint64_t size; + /** + * Pointer to write the data into. + * + * This is a fixed-size type for 32/64 compatibility. + */ + uint64_t data_ptr; +}; + +struct drm_i915_gem_pwrite { + /** Handle for the object being written to. */ + uint32_t handle; + uint32_t pad; + /** Offset into the object to write to */ + uint64_t offset; + /** Length of data to write */ + uint64_t size; + /** + * Pointer to read the data from. + * + * This is a fixed-size type for 32/64 compatibility. + */ + uint64_t data_ptr; +}; + +struct drm_i915_gem_mmap { + /** Handle for the object being mapped. */ + uint32_t handle; + uint32_t pad; + /** Offset in the object to map. */ + uint64_t offset; + /** + * Length of data to map. + * + * The value will be page-aligned. + */ + uint64_t size; + /** + * Returned pointer the data was mapped at. + * + * This is a fixed-size type for 32/64 compatibility. + */ + uint64_t addr_ptr; +}; + +struct drm_i915_gem_set_domain { + /** Handle for the object */ + uint32_t handle; + + /** New read domains */ + uint32_t read_domains; + + /** New write domain */ + uint32_t write_domain; +}; + +struct drm_i915_gem_sw_finish { + /** Handle for the object */ + uint32_t handle; +}; + +struct drm_i915_gem_relocation_entry { + /** + * Handle of the buffer being pointed to by this relocation entry. + * + * It's appealing to make this be an index into the mm_validate_entry + * list to refer to the buffer, but this allows the driver to create + * a relocation list for state buffers and not re-write it per + * exec using the buffer. + */ + uint32_t target_handle; + + /** + * Value to be added to the offset of the target buffer to make up + * the relocation entry. + */ + uint32_t delta; + + /** Offset in the buffer the relocation entry will be written into */ + uint64_t offset; + + /** + * Offset value of the target buffer that the relocation entry was last + * written as. + * + * If the buffer has the same offset as last time, we can skip syncing + * and writing the relocation. This value is written back out by + * the execbuffer ioctl when the relocation is written. + */ + uint64_t presumed_offset; + + /** + * Target memory domains read by this operation. + */ + uint32_t read_domains; + + /** + * Target memory domains written by this operation. + * + * Note that only one domain may be written by the whole + * execbuffer operation, so that where there are conflicts, + * the application will get -EINVAL back. + */ + uint32_t write_domain; +}; + +/** @{ + * Intel memory domains + * + * Most of these just align with the various caches in + * the system and are used to flush and invalidate as + * objects end up cached in different domains. + */ +/** CPU cache */ +#define I915_GEM_DOMAIN_CPU 0x00000001 +/** Render cache, used by 2D and 3D drawing */ +#define I915_GEM_DOMAIN_RENDER 0x00000002 +/** Sampler cache, used by texture engine */ +#define I915_GEM_DOMAIN_SAMPLER 0x00000004 +/** Command queue, used to load batch buffers */ +#define I915_GEM_DOMAIN_COMMAND 0x00000008 +/** Instruction cache, used by shader programs */ +#define I915_GEM_DOMAIN_INSTRUCTION 0x00000010 +/** Vertex address cache */ +#define I915_GEM_DOMAIN_VERTEX 0x00000020 +/** GTT domain - aperture and scanout */ +#define I915_GEM_DOMAIN_GTT 0x00000040 +/** @} */ + +struct drm_i915_gem_exec_object { + /** + * User's handle for a buffer to be bound into the GTT for this + * operation. + */ + uint32_t handle; + + /** Number of relocations to be performed on this buffer */ + uint32_t relocation_count; + /** + * Pointer to array of struct drm_i915_gem_relocation_entry containing + * the relocations to be performed in this buffer. + */ + uint64_t relocs_ptr; + + /** Required alignment in graphics aperture */ + uint64_t alignment; + + /** + * Returned value of the updated offset of the object, for future + * presumed_offset writes. + */ + uint64_t offset; +}; + +struct drm_i915_gem_execbuffer { + /** + * List of buffers to be validated with their relocations to be + * performend on them. + * + * This is a pointer to an array of struct drm_i915_gem_validate_entry. + * + * These buffers must be listed in an order such that all relocations + * a buffer is performing refer to buffers that have already appeared + * in the validate list. + */ + uint64_t buffers_ptr; + uint32_t buffer_count; + + /** Offset in the batchbuffer to start execution from. */ + uint32_t batch_start_offset; + /** Bytes used in batchbuffer from batch_start_offset */ + uint32_t batch_len; + uint32_t DR1; + uint32_t DR4; + uint32_t num_cliprects; + /** This is a struct drm_clip_rect *cliprects */ + uint64_t cliprects_ptr; +}; + +struct drm_i915_gem_pin { + /** Handle of the buffer to be pinned. */ + uint32_t handle; + uint32_t pad; + + /** alignment required within the aperture */ + uint64_t alignment; + + /** Returned GTT offset of the buffer. */ + uint64_t offset; +}; + +struct drm_i915_gem_unpin { + /** Handle of the buffer to be unpinned. */ + uint32_t handle; + uint32_t pad; +}; + +struct drm_i915_gem_busy { + /** Handle of the buffer to check for busy */ + uint32_t handle; + + /** Return busy status (1 if busy, 0 if idle) */ + uint32_t busy; +}; + +#define I915_TILING_NONE 0 +#define I915_TILING_X 1 +#define I915_TILING_Y 2 + +#define I915_BIT_6_SWIZZLE_NONE 0 +#define I915_BIT_6_SWIZZLE_9 1 +#define I915_BIT_6_SWIZZLE_9_10 2 +#define I915_BIT_6_SWIZZLE_9_11 3 +#define I915_BIT_6_SWIZZLE_9_10_11 4 +/* Not seen by userland */ +#define I915_BIT_6_SWIZZLE_UNKNOWN 5 + +struct drm_i915_gem_set_tiling { + /** Handle of the buffer to have its tiling state updated */ + uint32_t handle; + + /** + * Tiling mode for the object (I915_TILING_NONE, I915_TILING_X, + * I915_TILING_Y). + * + * This value is to be set on request, and will be updated by the + * kernel on successful return with the actual chosen tiling layout. + * + * The tiling mode may be demoted to I915_TILING_NONE when the system + * has bit 6 swizzling that can't be managed correctly by GEM. + * + * Buffer contents become undefined when changing tiling_mode. + */ + uint32_t tiling_mode; + + /** + * Stride in bytes for the object when in I915_TILING_X or + * I915_TILING_Y. + */ + uint32_t stride; + + /** + * Returned address bit 6 swizzling required for CPU access through + * mmap mapping. + */ + uint32_t swizzle_mode; +}; + +struct drm_i915_gem_get_tiling { + /** Handle of the buffer to get tiling state for. */ + uint32_t handle; + + /** + * Current tiling mode for the object (I915_TILING_NONE, I915_TILING_X, + * I915_TILING_Y). + */ + uint32_t tiling_mode; + + /** + * Returned address bit 6 swizzling required for CPU access through + * mmap mapping. + */ + uint32_t swizzle_mode; +}; + #endif /* _I915_DRM_H_ */ diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index 6e4ace270276..79a8ed8e6a7d 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -166,6 +166,7 @@ typedef enum fe_modulation { VSB_16, PSK_8, APSK_16, + APSK_32, DQPSK, } fe_modulation_t; @@ -295,6 +296,7 @@ typedef enum fe_delivery_system { SYS_DVBC_ANNEX_AC, SYS_DVBC_ANNEX_B, SYS_DVBT, + SYS_DSS, SYS_DVBS, SYS_DVBS2, SYS_DVBH, diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index 493435bcdbe5..01d67ba9e985 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -60,7 +60,7 @@ #define I2C_DRIVERID_WM8775 69 /* wm8775 audio processor */ #define I2C_DRIVERID_CS53L32A 70 /* cs53l32a audio processor */ #define I2C_DRIVERID_CX25840 71 /* cx2584x video encoder */ -#define I2C_DRIVERID_SAA7127 72 /* saa7124 video encoder */ +#define I2C_DRIVERID_SAA7127 72 /* saa7127 video encoder */ #define I2C_DRIVERID_SAA711X 73 /* saa711x video encoders */ #define I2C_DRIVERID_AKITAIOEXP 74 /* IO Expander on Sharp SL-C1000 */ #define I2C_DRIVERID_INFRARED 75 /* I2C InfraRed on Video boards */ diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index 463d6f10b64f..c7d106ef22e2 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -641,6 +641,11 @@ struct transaction_s */ int t_handle_count; + /* + * For use by the filesystem to store fs-specific data + * structures associated with the transaction + */ + struct list_head t_private_list; }; struct transaction_run_stats_s { @@ -935,6 +940,10 @@ struct journal_s pid_t j_last_sync_writer; + /* This function is called when a transaction is closed */ + void (*j_commit_callback)(journal_t *, + transaction_t *); + /* * Journal statistics */ diff --git a/include/linux/writeback.h b/include/linux/writeback.h index 12b15c561a1f..e585657e9831 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -63,7 +63,15 @@ struct writeback_control { unsigned for_writepages:1; /* This is a writepages() call */ unsigned range_cyclic:1; /* range_start is cyclic */ unsigned more_io:1; /* more io to be dispatched */ - unsigned range_cont:1; + /* + * write_cache_pages() won't update wbc->nr_to_write and + * mapping->writeback_index if no_nrwrite_index_update + * is set. write_cache_pages() may write more than we + * requested and we want to make sure nr_to_write and + * writeback_index are updated in a consistent manner + * so we use a single control to update them + */ + unsigned no_nrwrite_index_update:1; }; /* diff --git a/include/media/soc_camera_platform.h b/include/media/soc_camera_platform.h index 851f18220984..1d092b4678aa 100644 --- a/include/media/soc_camera_platform.h +++ b/include/media/soc_camera_platform.h @@ -1,3 +1,13 @@ +/* + * Generic Platform Camera Driver Header + * + * Copyright (C) 2008 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + #ifndef __SOC_CAMERA_H__ #define __SOC_CAMERA_H__ @@ -9,6 +19,7 @@ struct soc_camera_platform_info { unsigned long format_depth; struct v4l2_pix_format format; unsigned long bus_param; + void (*power)(int); int (*set_capture)(struct soc_camera_platform_info *info, int enable); }; diff --git a/include/media/tuner.h b/include/media/tuner.h index 67c1f514d0e2..7d4e2db78076 100644 --- a/include/media/tuner.h +++ b/include/media/tuner.h @@ -123,6 +123,7 @@ #define TUNER_TEA5761 75 /* Only FM Radio Tuner */ #define TUNER_XC5000 76 /* Xceive Silicon Tuner */ #define TUNER_TCL_MF02GIP_5N 77 /* TCL MF02GIP_5N */ +#define TUNER_PHILIPS_FMD1216MEX_MK3 78 /* tv card specific */ #define TDA9887_PRESENT (1<<0) diff --git a/include/media/v4l2-i2c-drv-legacy.h b/include/media/v4l2-i2c-drv-legacy.h index 975ffbf4e2c5..e65dd9d84e8b 100644 --- a/include/media/v4l2-i2c-drv-legacy.h +++ b/include/media/v4l2-i2c-drv-legacy.h @@ -21,6 +21,17 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +/* NOTE: the full version of this header is in the v4l-dvb repository + * and allows v4l i2c drivers to be compiled on older kernels as well. + * The version of this header as it appears in the kernel is a stripped + * version (without all the backwards compatibility stuff) and so it + * looks a bit odd. + * + * If you look at the full version then you will understand the reason + * for introducing this header since you really don't want to have all + * the tricky backwards compatibility code in each and every i2c driver. + */ + struct v4l2_i2c_driver_data { const char * const name; int driverid; diff --git a/include/media/v4l2-i2c-drv.h b/include/media/v4l2-i2c-drv.h index 40ecef29801d..efdc8bf27f87 100644 --- a/include/media/v4l2-i2c-drv.h +++ b/include/media/v4l2-i2c-drv.h @@ -21,6 +21,17 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +/* NOTE: the full version of this header is in the v4l-dvb repository + * and allows v4l i2c drivers to be compiled on older kernels as well. + * The version of this header as it appears in the kernel is a stripped + * version (without all the backwards compatibility stuff) and so it + * looks a bit odd. + * + * If you look at the full version then you will understand the reason + * for introducing this header since you really don't want to have all + * the tricky backwards compatibility code in each and every i2c driver. + */ + #ifndef __V4L2_I2C_DRV_H__ #define __V4L2_I2C_DRV_H__ diff --git a/include/media/videobuf-dvb.h b/include/media/videobuf-dvb.h index b77748696329..80471c2b6343 100644 --- a/include/media/videobuf-dvb.h +++ b/include/media/videobuf-dvb.h @@ -16,7 +16,6 @@ struct videobuf_dvb { int nfeeds; /* videobuf_dvb_(un)register manges this */ - struct dvb_adapter adapter; struct dvb_demux demux; struct dmxdev dmxdev; struct dmx_frontend fe_hw; @@ -24,12 +23,34 @@ struct videobuf_dvb { struct dvb_net net; }; -int videobuf_dvb_register(struct videobuf_dvb *dvb, +struct videobuf_dvb_frontend { + struct list_head felist; + int id; + struct videobuf_dvb dvb; +}; + +struct videobuf_dvb_frontends { + struct list_head felist; + struct mutex lock; + struct dvb_adapter adapter; + int active_fe_id; /* Indicates which frontend in the felist is in use */ + int gate; /* Frontend with gate control 0=!MFE,1=fe0,2=fe1 etc */ +}; + +int videobuf_dvb_register_bus(struct videobuf_dvb_frontends *f, struct module *module, void *adapter_priv, struct device *device, - short *adapter_nr); -void videobuf_dvb_unregister(struct videobuf_dvb *dvb); + short *adapter_nr, + int mfe_shared); + +void videobuf_dvb_unregister_bus(struct videobuf_dvb_frontends *f); + +struct videobuf_dvb_frontend * videobuf_dvb_alloc_frontend(struct videobuf_dvb_frontends *f, int id); + +struct videobuf_dvb_frontend * videobuf_dvb_get_frontend(struct videobuf_dvb_frontends *f, int id); +int videobuf_dvb_find_frontend(struct videobuf_dvb_frontends *f, struct dvb_frontend *p); + /* * Local variables: diff --git a/mm/page-writeback.c b/mm/page-writeback.c index c130a137c129..b40f6d5f8fe9 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -876,6 +876,7 @@ int write_cache_pages(struct address_space *mapping, pgoff_t end; /* Inclusive */ int scanned = 0; int range_whole = 0; + long nr_to_write = wbc->nr_to_write; if (wbc->nonblocking && bdi_write_congested(bdi)) { wbc->encountered_congestion = 1; @@ -939,7 +940,7 @@ retry: unlock_page(page); ret = 0; } - if (ret || (--(wbc->nr_to_write) <= 0)) + if (ret || (--nr_to_write <= 0)) done = 1; if (wbc->nonblocking && bdi_write_congested(bdi)) { wbc->encountered_congestion = 1; @@ -958,11 +959,12 @@ retry: index = 0; goto retry; } - if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0)) - mapping->writeback_index = index; + if (!wbc->no_nrwrite_index_update) { + if (wbc->range_cyclic || (range_whole && nr_to_write > 0)) + mapping->writeback_index = index; + wbc->nr_to_write = nr_to_write; + } - if (wbc->range_cont) - wbc->range_start = index << PAGE_CACHE_SHIFT; return ret; } EXPORT_SYMBOL(write_cache_pages); diff --git a/mm/shmem.c b/mm/shmem.c index bf66d0191baf..d87958a5f03e 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -2580,6 +2580,7 @@ put_memory: shmem_unacct_size(flags, size); return ERR_PTR(error); } +EXPORT_SYMBOL_GPL(shmem_file_setup); /** * shmem_zero_setup - setup a shared anonymous mapping |