diff options
| -rw-r--r-- | drivers/spi/spi-stm32.c | 57 |
1 files changed, 20 insertions, 37 deletions
diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index 535f4bebc010..14ca7ea04e47 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -911,7 +911,10 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id) if (sr & STM32H7_SPI_SR_EOT) { if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0))) stm32h7_spi_read_rxfifo(spi); - end = true; + if (!spi->cur_usedma || + (spi->cur_usedma && (spi->cur_comm == SPI_SIMPLEX_TX || + spi->cur_comm == SPI_3WIRE_TX))) + end = true; } if (sr & STM32H7_SPI_SR_TXP) @@ -1019,42 +1022,17 @@ static void stm32f4_spi_dma_tx_cb(void *data) } /** - * stm32f4_spi_dma_rx_cb - dma callback + * stm32_spi_dma_rx_cb - dma callback * @data: pointer to the spi controller data structure * * DMA callback is called when the transfer is complete for DMA RX channel. */ -static void stm32f4_spi_dma_rx_cb(void *data) +static void stm32_spi_dma_rx_cb(void *data) { struct stm32_spi *spi = data; spi_finalize_current_transfer(spi->master); - stm32f4_spi_disable(spi); -} - -/** - * stm32h7_spi_dma_cb - dma callback - * @data: pointer to the spi controller data structure - * - * DMA callback is called when the transfer is complete or when an error - * occurs. If the transfer is complete, EOT flag is raised. - */ -static void stm32h7_spi_dma_cb(void *data) -{ - struct stm32_spi *spi = data; - unsigned long flags; - u32 sr; - - spin_lock_irqsave(&spi->lock, flags); - - sr = readl_relaxed(spi->base + STM32H7_SPI_SR); - - spin_unlock_irqrestore(&spi->lock, flags); - - if (!(sr & STM32H7_SPI_SR_EOT)) - dev_warn(spi->dev, "DMA error (sr=0x%08x)\n", sr); - - /* Now wait for EOT, or SUSP or OVR in case of error */ + spi->cfg->disable(spi); } /** @@ -1220,11 +1198,13 @@ static void stm32f4_spi_transfer_one_dma_start(struct stm32_spi *spi) */ static void stm32h7_spi_transfer_one_dma_start(struct stm32_spi *spi) { - /* Enable the interrupts relative to the end of transfer */ - stm32_spi_set_bits(spi, STM32H7_SPI_IER, STM32H7_SPI_IER_EOTIE | - STM32H7_SPI_IER_TXTFIE | - STM32H7_SPI_IER_OVRIE | - STM32H7_SPI_IER_MODFIE); + uint32_t ier = STM32H7_SPI_IER_OVRIE | STM32H7_SPI_IER_MODFIE; + + /* Enable the interrupts */ + if (spi->cur_comm == SPI_SIMPLEX_TX || spi->cur_comm == SPI_3WIRE_TX) + ier |= STM32H7_SPI_IER_EOTIE | STM32H7_SPI_IER_TXTFIE; + + stm32_spi_set_bits(spi, STM32H7_SPI_IER, ier); stm32_spi_enable(spi); @@ -1736,7 +1716,7 @@ static const struct stm32_spi_cfg stm32f4_spi_cfg = { .set_mode = stm32f4_spi_set_mode, .transfer_one_dma_start = stm32f4_spi_transfer_one_dma_start, .dma_tx_cb = stm32f4_spi_dma_tx_cb, - .dma_rx_cb = stm32f4_spi_dma_rx_cb, + .dma_rx_cb = stm32_spi_dma_rx_cb, .transfer_one_irq = stm32f4_spi_transfer_one_irq, .irq_handler_event = stm32f4_spi_irq_event, .irq_handler_thread = stm32f4_spi_irq_thread, @@ -1756,8 +1736,11 @@ static const struct stm32_spi_cfg stm32h7_spi_cfg = { .set_data_idleness = stm32h7_spi_data_idleness, .set_number_of_data = stm32h7_spi_number_of_data, .transfer_one_dma_start = stm32h7_spi_transfer_one_dma_start, - .dma_rx_cb = stm32h7_spi_dma_cb, - .dma_tx_cb = stm32h7_spi_dma_cb, + .dma_rx_cb = stm32_spi_dma_rx_cb, + /* + * dma_tx_cb is not necessary since in case of TX, dma is followed by + * SPI access hence handling is performed within the SPI interrupt + */ .transfer_one_irq = stm32h7_spi_transfer_one_irq, .irq_handler_thread = stm32h7_spi_irq_thread, .baud_rate_div_min = STM32H7_SPI_MBR_DIV_MIN, |