diff options
| -rw-r--r-- | drivers/iio/adc/ina2xx-adc.c | 54 |
1 files changed, 45 insertions, 9 deletions
diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c index 707bd69a7353..ff31f5b49a41 100644 --- a/drivers/iio/adc/ina2xx-adc.c +++ b/drivers/iio/adc/ina2xx-adc.c @@ -116,6 +116,7 @@ struct ina2xx_chip_info { s64 prev_ns; /* track buffer capture time, check for underruns*/ int int_time_vbus; /* Bus voltage integration time uS */ int int_time_vshunt; /* Shunt voltage integration time uS */ + bool allow_async_readout; }; static const struct ina2xx_config ina2xx_config[] = { @@ -322,6 +323,33 @@ _err: } +static ssize_t ina2xx_allow_async_readout_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ina2xx_chip_info *chip = iio_priv(dev_to_iio_dev(dev)); + + return sprintf(buf, "%d\n", chip->allow_async_readout); +} + +static ssize_t ina2xx_allow_async_readout_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct ina2xx_chip_info *chip = iio_priv(dev_to_iio_dev(dev)); + bool val; + int ret; + + ret = strtobool((const char *) buf, &val); + if (ret) + return ret; + + chip->allow_async_readout = val; + + return len; +} + + #define INA2XX_CHAN(_type, _index, _address) { \ .type = (_type), \ .address = (_address), \ @@ -390,16 +418,17 @@ static int ina2xx_work_buffer(struct iio_dev *indio_dev) * GPIO a triggered buffer could be used instead. * For now, we pay for that extra read of the ALERT register */ - do { - ret = regmap_read(chip->regmap, INA226_ALERT_MASK, - &alert); - if (ret < 0) - return ret; + if (!chip->allow_async_readout) + do { + ret = regmap_read(chip->regmap, INA226_ALERT_MASK, + &alert); + if (ret < 0) + return ret; - alert &= INA266_CVRF; - trace_printk("Conversion ready: %d\n", !!alert); + alert &= INA266_CVRF; + trace_printk("Conversion ready: %d\n", !!alert); - } while (!alert); + } while (!alert); /* * Single register reads: bulk_read will not work with ina226 @@ -444,7 +473,8 @@ static int ina2xx_capture_thread(void *data) * Poll a bit faster than the chip internal Fs, in case * we wish to sync with the conversion ready flag. */ - sampling_us -= 200; + if (!chip->allow_async_readout) + sampling_us -= 200; do { buffer_us = ina2xx_work_buffer(indio_dev); @@ -469,6 +499,7 @@ static int ina2xx_buffer_enable(struct iio_dev *indio_dev) 1000000/sampling_us, chip->avg); trace_printk("Expected work period: %u us\n", sampling_us); + trace_printk("Async readout mode: %d\n", chip->allow_async_readout); chip->prev_ns = iio_get_time_ns(); @@ -510,7 +541,12 @@ static int ina2xx_debug_reg(struct iio_dev *indio_dev, static IIO_CONST_ATTR_INT_TIME_AVAIL \ ("0.000140 0.000204 0.000332 0.000588 0.001100 0.002116 0.004156 0.008244"); +static IIO_DEVICE_ATTR(in_allow_async_readout, S_IRUGO | S_IWUSR, + ina2xx_allow_async_readout_show, + ina2xx_allow_async_readout_store, 0); + static struct attribute *ina2xx_attributes[] = { + &iio_dev_attr_in_allow_async_readout.dev_attr.attr, &iio_const_attr_integration_time_available.dev_attr.attr, NULL, }; |