diff options
196 files changed, 8731 insertions, 2216 deletions
diff --git a/Documentation/DocBook/sh.tmpl b/Documentation/DocBook/sh.tmpl index d858d92cf6d9..4a38f604fa66 100644 --- a/Documentation/DocBook/sh.tmpl +++ b/Documentation/DocBook/sh.tmpl @@ -79,10 +79,6 @@ </sect2> </sect1> </chapter> - <chapter id="clk"> - <title>Clock Framework Extensions</title> -!Iinclude/linux/sh_clk.h - </chapter> <chapter id="mach"> <title>Machine Specific Interfaces</title> <sect1 id="dreamcast"> diff --git a/Documentation/fb/00-INDEX b/Documentation/fb/00-INDEX index a618fd99c9f0..30a70542e823 100644 --- a/Documentation/fb/00-INDEX +++ b/Documentation/fb/00-INDEX @@ -4,33 +4,41 @@ please mail me. Geert Uytterhoeven <geert@linux-m68k.org> 00-INDEX - - this file + - this file. arkfb.txt - info on the fbdev driver for ARK Logic chips. aty128fb.txt - info on the ATI Rage128 frame buffer driver. cirrusfb.txt - info on the driver for Cirrus Logic chipsets. +cmap_xfbdev.txt + - an introduction to fbdev's cmap structures. deferred_io.txt - an introduction to deferred IO. +efifb.txt + - info on the EFI platform driver for Intel based Apple computers. +ep93xx-fb.txt + - info on the driver for EP93xx LCD controller. fbcon.txt - intro to and usage guide for the framebuffer console (fbcon). framebuffer.txt - introduction to frame buffer devices. -imacfb.txt - - info on the generic EFI platform driver for Intel based Macs. +gxfb.txt + - info on the framebuffer driver for AMD Geode GX2 based processors. intel810.txt - documentation for the Intel 810/815 framebuffer driver. intelfb.txt - docs for Intel 830M/845G/852GM/855GM/865G/915G/945G fb driver. internals.txt - quick overview of frame buffer device internals. +lxfb.txt + - info on the framebuffer driver for AMD Geode LX based processors. matroxfb.txt - info on the Matrox framebuffer driver for Alpha, Intel and PPC. +metronomefb.txt + - info on the driver for the Metronome display controller. modedb.txt - info on the video mode database. -matroxfb.txt - - info on the Matrox frame buffer driver. pvr2fb.txt - info on the PowerVR 2 frame buffer driver. pxafb.txt @@ -39,13 +47,23 @@ s3fb.txt - info on the fbdev driver for S3 Trio/Virge chips. sa1100fb.txt - information about the driver for the SA-1100 LCD controller. +sh7760fb.txt + - info on the SH7760/SH7763 integrated LCDC Framebuffer driver. sisfb.txt - info on the framebuffer device driver for various SiS chips. sstfb.txt - info on the frame buffer driver for 3dfx' Voodoo Graphics boards. tgafb.txt - - info on the TGA (DECChip 21030) frame buffer driver + - info on the TGA (DECChip 21030) frame buffer driver. +tridentfb.txt + info on the framebuffer driver for some Trident chip based cards. +uvesafb.txt + - info on the userspace VESA (VBE2+ compliant) frame buffer device. vesafb.txt - - info on the VESA frame buffer device + - info on the VESA frame buffer device. +viafb.modes + - list of modes for VIA Integration Graphic Chip. +viafb.txt + - info on the VIA Integration Graphic Chip console framebuffer driver. vt8623fb.txt - info on the fb driver for the graphics core in VIA VT8623 chipsets. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 92e83e53148f..cdd2a6e8a3b7 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2385,6 +2385,11 @@ and is between 256 and 4096 characters. It is defined in the file improve throughput, but will also increase the amount of memory reserved for use by the client. + swapaccount[=0|1] + [KNL] Enable accounting of swap in memory resource + controller if no parameter or 1 is given or disable + it if 0 is given (See Documentation/cgroups/memory.txt) + swiotlb= [IA-64] Number of I/O TLB slabs switches= [HW,M68k] diff --git a/Documentation/sh/clk.txt b/Documentation/sh/clk.txt deleted file mode 100644 index 114b595cfa97..000000000000 --- a/Documentation/sh/clk.txt +++ /dev/null @@ -1,32 +0,0 @@ -Clock framework on SuperH architecture - -The framework on SH extends existing API by the function clk_set_rate_ex, -which prototype is as follows: - - clk_set_rate_ex (struct clk *clk, unsigned long rate, int algo_id) - -The algo_id parameter is used to specify algorithm used to recalculate clocks, -adjanced to clock, specified as first argument. It is assumed that algo_id==0 -means no changes to adjanced clock - -Internally, the clk_set_rate_ex forwards request to clk->ops->set_rate method, -if it is present in ops structure. The method should set the clock rate and adjust -all needed clocks according to the passed algo_id. -Exact values for algo_id are machine-dependent. For the sh7722, the following -values are defined: - - NO_CHANGE = 0, - IUS_N1_N1, /* I:U = N:1, U:Sh = N:1 */ - IUS_322, /* I:U:Sh = 3:2:2 */ - IUS_522, /* I:U:Sh = 5:2:2 */ - IUS_N11, /* I:U:Sh = N:1:1 */ - SB_N1, /* Sh:B = N:1 */ - SB3_N1, /* Sh:B3 = N:1 */ - SB3_32, /* Sh:B3 = 3:2 */ - SB3_43, /* Sh:B3 = 4:3 */ - SB3_54, /* Sh:B3 = 5:4 */ - BP_N1, /* B:P = N:1 */ - IP_N1 /* I:P = N:1 */ - -Each of these constants means relation between clocks that can be set via the FRQCR -register diff --git a/MAINTAINERS b/MAINTAINERS index a92c994ba935..b3be8b3d0437 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1359,7 +1359,7 @@ F: include/net/bluetooth/ BONDING DRIVER M: Jay Vosburgh <fubar@us.ibm.com> -L: bonding-devel@lists.sourceforge.net +L: netdev@vger.kernel.org W: http://sourceforge.net/projects/bonding/ S: Supported F: drivers/net/bonding/ @@ -2444,10 +2444,12 @@ F: drivers/net/wan/sdla.c FRAMEBUFFER LAYER L: linux-fbdev@vger.kernel.org W: http://linux-fbdev.sourceforge.net/ +Q: http://patchwork.kernel.org/project/linux-fbdev/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6.git S: Orphan F: Documentation/fb/ -F: drivers/video/fb* +F: drivers/video/ +F: include/video/ F: include/linux/fb.h FREESCALE DMA DRIVER @@ -5837,6 +5839,8 @@ M: Chris Metcalf <cmetcalf@tilera.com> W: http://www.tilera.com/scm/ S: Supported F: arch/tile/ +F: drivers/char/hvc_tile.c +F: drivers/net/tile/ TLAN NETWORK DRIVER M: Samuel Chessman <chessman@tux.org> diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 6825c34646d4..9be21ba648cd 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -1084,6 +1084,6 @@ memdump: mov r12, r0 reloc_end: .align - .section ".stack", "w" + .section ".stack", "aw", %nobits user_stack: .space 4096 user_stack_end: diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in index d08168941bd6..366a924019ac 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.in +++ b/arch/arm/boot/compressed/vmlinux.lds.in @@ -57,7 +57,7 @@ SECTIONS .bss : { *(.bss) } _end = .; - .stack (NOLOAD) : { *(.stack) } + .stack : { *(.stack) } .stab 0 : { *(.stab) } .stabstr 0 : { *(.stabstr) } diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 062b58c029ab..749bb6622404 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -238,7 +238,7 @@ @ Slightly optimised to avoid incrementing the pointer twice usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort .if \rept == 2 - usraccoff \instr, \reg, \ptr, \inc, 4, \cond, \abort + usraccoff \instr, \reg, \ptr, \inc, \inc, \cond, \abort .endif add\cond \ptr, #\rept * \inc diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h index 68870c776671..b4ffe9d5b526 100644 --- a/arch/arm/include/asm/mmu.h +++ b/arch/arm/include/asm/mmu.h @@ -13,6 +13,10 @@ typedef struct { #ifdef CONFIG_CPU_HAS_ASID #define ASID(mm) ((mm)->context.id & 255) + +/* init_mm.context.id_lock should be initialized. */ +#define INIT_MM_CONTEXT(name) \ + .context.id_lock = __SPIN_LOCK_UNLOCKED(name.context.id_lock), #else #define ASID(mm) (0) #endif diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index b155414192da..53d1d5deb111 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -374,6 +374,9 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd))) +/* we don't need complex calculations here as the pmd is folded into the pgd */ +#define pmd_addr_end(addr,end) (end) + /* * Conversion functions: convert a page and protection to a page entry, * and a page entry and page directory to the page they refer to. diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S index 1e4cbd4e7be9..64f6bc1a9132 100644 --- a/arch/arm/lib/findbit.S +++ b/arch/arm/lib/findbit.S @@ -174,8 +174,8 @@ ENDPROC(_find_next_bit_be) */ .L_found: #if __LINUX_ARM_ARCH__ >= 5 - rsb r1, r3, #0 - and r3, r3, r1 + rsb r0, r3, #0 + and r3, r3, r0 clz r3, r3 rsb r3, r3, #31 add r0, r2, r3 @@ -190,5 +190,7 @@ ENDPROC(_find_next_bit_be) addeq r2, r2, #1 mov r0, r2 #endif + cmp r1, r0 @ Clamp to maxbit + movlo r0, r1 mov pc, lr diff --git a/arch/arm/mach-aaec2000/include/mach/vmalloc.h b/arch/arm/mach-aaec2000/include/mach/vmalloc.h index cff4e0a996ce..a6299e8321bd 100644 --- a/arch/arm/mach-aaec2000/include/mach/vmalloc.h +++ b/arch/arm/mach-aaec2000/include/mach/vmalloc.h @@ -11,6 +11,6 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H -#define VMALLOC_END 0xd0000000 +#define VMALLOC_END 0xd0000000UL #endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-bcmring/include/mach/vmalloc.h b/arch/arm/mach-bcmring/include/mach/vmalloc.h index 3db3a09fd398..7397bd7817d9 100644 --- a/arch/arm/mach-bcmring/include/mach/vmalloc.h +++ b/arch/arm/mach-bcmring/include/mach/vmalloc.h @@ -22,4 +22,4 @@ * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles * larger physical memory designs better. */ -#define VMALLOC_END 0xf0000000 +#define VMALLOC_END 0xf0000000UL diff --git a/arch/arm/mach-clps711x/include/mach/vmalloc.h b/arch/arm/mach-clps711x/include/mach/vmalloc.h index 30b3a287ed88..467b96137e47 100644 --- a/arch/arm/mach-clps711x/include/mach/vmalloc.h +++ b/arch/arm/mach-clps711x/include/mach/vmalloc.h @@ -17,4 +17,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END 0xd0000000 +#define VMALLOC_END 0xd0000000UL diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 9be261beae7d..2652af124acd 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -359,8 +359,8 @@ static struct clk_lookup dm355_clks[] = { CLK(NULL, "uart1", &uart1_clk), CLK(NULL, "uart2", &uart2_clk), CLK("i2c_davinci.1", NULL, &i2c_clk), - CLK("davinci-asp.0", NULL, &asp0_clk), - CLK("davinci-asp.1", NULL, &asp1_clk), + CLK("davinci-mcbsp.0", NULL, &asp0_clk), + CLK("davinci-mcbsp.1", NULL, &asp1_clk), CLK("davinci_mmc.0", NULL, &mmcsd0_clk), CLK("davinci_mmc.1", NULL, &mmcsd1_clk), CLK("spi_davinci.0", NULL, &spi0_clk), @@ -664,7 +664,7 @@ static struct resource dm355_asp1_resources[] = { }; static struct platform_device dm355_asp1_device = { - .name = "davinci-asp", + .name = "davinci-mcbsp", .id = 1, .num_resources = ARRAY_SIZE(dm355_asp1_resources), .resource = dm355_asp1_resources, diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index a12065e87266..c466d710d3c1 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -459,7 +459,7 @@ static struct clk_lookup dm365_clks[] = { CLK(NULL, "usb", &usb_clk), CLK("davinci_emac.1", NULL, &emac_clk), CLK("davinci_voicecodec", NULL, &voicecodec_clk), - CLK("davinci-asp.0", NULL, &asp0_clk), + CLK("davinci-mcbsp", NULL, &asp0_clk), CLK(NULL, "rto", &rto_clk), CLK(NULL, "mjcp", &mjcp_clk), CLK(NULL, NULL, NULL), @@ -922,8 +922,8 @@ static struct resource dm365_asp_resources[] = { }; static struct platform_device dm365_asp_device = { - .name = "davinci-asp", - .id = 0, + .name = "davinci-mcbsp", + .id = -1, .num_resources = ARRAY_SIZE(dm365_asp_resources), .resource = dm365_asp_resources, }; diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 0608dd776a16..9a2376b3137c 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -302,7 +302,7 @@ static struct clk_lookup dm644x_clks[] = { CLK("davinci_emac.1", NULL, &emac_clk), CLK("i2c_davinci.1", NULL, &i2c_clk), CLK("palm_bk3710", NULL, &ide_clk), - CLK("davinci-asp", NULL, &asp_clk), + CLK("davinci-mcbsp", NULL, &asp_clk), CLK("davinci_mmc.0", NULL, &mmcsd_clk), CLK(NULL, "spi", &spi_clk), CLK(NULL, "gpio", &gpio_clk), @@ -580,7 +580,7 @@ static struct resource dm644x_asp_resources[] = { }; static struct platform_device dm644x_asp_device = { - .name = "davinci-asp", + .name = "davinci-mcbsp", .id = -1, .num_resources = ARRAY_SIZE(dm644x_asp_resources), .resource = dm644x_asp_resources, diff --git a/arch/arm/mach-ebsa110/include/mach/vmalloc.h b/arch/arm/mach-ebsa110/include/mach/vmalloc.h index 60bde56fba4c..ea141b7a3e03 100644 --- a/arch/arm/mach-ebsa110/include/mach/vmalloc.h +++ b/arch/arm/mach-ebsa110/include/mach/vmalloc.h @@ -7,4 +7,4 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#define VMALLOC_END 0xdf000000 +#define VMALLOC_END 0xdf000000UL diff --git a/arch/arm/mach-footbridge/include/mach/vmalloc.h b/arch/arm/mach-footbridge/include/mach/vmalloc.h index 0ffbb7c85e59..40ba78e5782b 100644 --- a/arch/arm/mach-footbridge/include/mach/vmalloc.h +++ b/arch/arm/mach-footbridge/include/mach/vmalloc.h @@ -7,4 +7,4 @@ */ -#define VMALLOC_END 0xf0000000 +#define VMALLOC_END 0xf0000000UL diff --git a/arch/arm/mach-h720x/include/mach/vmalloc.h b/arch/arm/mach-h720x/include/mach/vmalloc.h index a45915b88756..8520b4a4d4e6 100644 --- a/arch/arm/mach-h720x/include/mach/vmalloc.h +++ b/arch/arm/mach-h720x/include/mach/vmalloc.h @@ -5,6 +5,6 @@ #ifndef __ARCH_ARM_VMALLOC_H #define __ARCH_ARM_VMALLOC_H -#define VMALLOC_END 0xd0000000 +#define VMALLOC_END 0xd0000000UL #endif diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index 026263c665ca..7e1e9dc2c8fc 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -250,9 +250,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -#if defined(CONFIG_TOUCHSCREEN_ADS7846) \ - || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - #define ADS7846_PENDOWN (GPIO_PORTD | 25) static void ads7846_dev_init(void) @@ -273,9 +270,7 @@ static struct ads7846_platform_data ads7846_config __initdata = { .get_pendown_state = ads7846_get_pendown_state, .keep_vref_on = 1, }; -#endif -#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = { [0] = { .modalias = "ads7846", @@ -294,7 +289,6 @@ static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = { .chipselect = eukrea_mbimx27_spi_cs, .num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs), }; -#endif static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = { { diff --git a/arch/arm/mach-integrator/include/mach/vmalloc.h b/arch/arm/mach-integrator/include/mach/vmalloc.h index e056e7cf5645..2f5a2bafb11f 100644 --- a/arch/arm/mach-integrator/include/mach/vmalloc.h +++ b/arch/arm/mach-integrator/include/mach/vmalloc.h @@ -17,4 +17,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END 0xd0000000 +#define VMALLOC_END 0xd0000000UL diff --git a/arch/arm/mach-msm/include/mach/vmalloc.h b/arch/arm/mach-msm/include/mach/vmalloc.h index 31a32ad062dc..d138448eff16 100644 --- a/arch/arm/mach-msm/include/mach/vmalloc.h +++ b/arch/arm/mach-msm/include/mach/vmalloc.h @@ -16,7 +16,7 @@ #ifndef __ASM_ARCH_MSM_VMALLOC_H #define __ASM_ARCH_MSM_VMALLOC_H -#define VMALLOC_END 0xd0000000 +#define VMALLOC_END 0xd0000000UL #endif diff --git a/arch/arm/mach-mx25/devices-imx25.h b/arch/arm/mach-mx25/devices-imx25.h index 93afa10b13cf..d94d282fa676 100644 --- a/arch/arm/mach-mx25/devices-imx25.h +++ b/arch/arm/mach-mx25/devices-imx25.h @@ -42,9 +42,9 @@ extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst; #define imx25_add_mxc_nand(pdata) \ imx_add_mxc_nand(&imx25_mxc_nand_data, pdata) -extern const struct imx_spi_imx_data imx25_spi_imx_data[] __initconst; +extern const struct imx_spi_imx_data imx25_cspi_data[] __initconst; #define imx25_add_spi_imx(id, pdata) \ - imx_add_spi_imx(&imx25_spi_imx_data[id], pdata) + imx_add_spi_imx(&imx25_cspi_data[id], pdata) #define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata) #define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata) #define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata) diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c index 99e0894e07db..fda56545d2fd 100644 --- a/arch/arm/mach-mx3/mach-pcm037_eet.c +++ b/arch/arm/mach-mx3/mach-pcm037_eet.c @@ -14,6 +14,7 @@ #include <mach/common.h> #include <mach/iomux-mx3.h> +#include <mach/spi.h> #include <asm/mach-types.h> @@ -59,14 +60,12 @@ static struct spi_board_info pcm037_spi_dev[] = { }; /* Platform Data for MXC CSPI */ -#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)}; static const struct spi_imx_master pcm037_spi1_pdata __initconst = { .chipselect = pcm037_spi1_cs, .num_chipselect = ARRAY_SIZE(pcm037_spi1_cs), }; -#endif /* GPIO-keys input device */ static struct gpio_keys_button pcm037_gpio_keys[] = { @@ -171,7 +170,7 @@ static struct platform_device pcm037_gpio_keys_device = { }, }; -static int eet_init_devices(void) +static int __init eet_init_devices(void) { if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET) return 0; diff --git a/arch/arm/mach-netx/include/mach/vmalloc.h b/arch/arm/mach-netx/include/mach/vmalloc.h index 7cca3574308f..871f1ef7bff5 100644 --- a/arch/arm/mach-netx/include/mach/vmalloc.h +++ b/arch/arm/mach-netx/include/mach/vmalloc.h @@ -16,4 +16,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END 0xd0000000 +#define VMALLOC_END 0xd0000000UL diff --git a/arch/arm/mach-omap1/include/mach/vmalloc.h b/arch/arm/mach-omap1/include/mach/vmalloc.h index b001f67d695b..22ec4a479577 100644 --- a/arch/arm/mach-omap1/include/mach/vmalloc.h +++ b/arch/arm/mach-omap1/include/mach/vmalloc.h @@ -17,4 +17,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END 0xd8000000 +#define VMALLOC_END 0xd8000000UL diff --git a/arch/arm/mach-omap2/include/mach/vmalloc.h b/arch/arm/mach-omap2/include/mach/vmalloc.h index 4da31e997efe..866319947760 100644 --- a/arch/arm/mach-omap2/include/mach/vmalloc.h +++ b/arch/arm/mach-omap2/include/mach/vmalloc.h @@ -17,4 +17,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END 0xf8000000 +#define VMALLOC_END 0xf8000000UL diff --git a/arch/arm/mach-pnx4008/include/mach/vmalloc.h b/arch/arm/mach-pnx4008/include/mach/vmalloc.h index 31b65ee07b0b..184913c71141 100644 --- a/arch/arm/mach-pnx4008/include/mach/vmalloc.h +++ b/arch/arm/mach-pnx4008/include/mach/vmalloc.h @@ -17,4 +17,4 @@ * The vmalloc() routines leaves a hole of 4kB between each vmalloced * area for the same reason. ;) */ -#define VMALLOC_END 0xd0000000 +#define VMALLOC_END 0xd0000000UL diff --git a/arch/arm/mach-rpc/include/mach/vmalloc.h b/arch/arm/mach-rpc/include/mach/vmalloc.h index 3bcd86fadb81..fb700228637a 100644 --- a/arch/arm/mach-rpc/include/mach/vmalloc.h +++ b/arch/arm/mach-rpc/include/mach/vmalloc.h @@ -7,4 +7,4 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#define VMALLOC_END 0xdc000000 +#define VMALLOC_END 0xdc000000UL diff --git a/arch/arm/mach-shark/include/mach/vmalloc.h b/arch/arm/mach-shark/include/mach/vmalloc.h index 8e845b6a7cb5..b10df988526d 100644 --- a/arch/arm/mach-shark/include/mach/vmalloc.h +++ b/arch/arm/mach-shark/include/mach/vmalloc.h @@ -1,4 +1,4 @@ /* * arch/arm/mach-shark/include/mach/vmalloc.h */ -#define VMALLOC_END 0xd0000000 +#define VMALLOC_END 0xd0000000UL diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 7db31e6c6bf2..b25ce90a346e 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -220,8 +220,7 @@ static void pllc2_disable(struct clk *clk) __raw_writel(__raw_readl(PLLC2CR) & ~0x80000000, PLLC2CR); } -static int pllc2_set_rate(struct clk *clk, - unsigned long rate, int algo_id) +static int pllc2_set_rate(struct clk *clk, unsigned long rate) { unsigned long value; int idx; @@ -463,8 +462,7 @@ static int fsidiv_enable(struct clk *clk) return 0; } -static int fsidiv_set_rate(struct clk *clk, - unsigned long rate, int algo_id) +static int fsidiv_set_rate(struct clk *clk, unsigned long rate) { int idx; diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 73fb1a551ec6..608a1372b172 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -75,14 +75,14 @@ void __init ux500_init_irq(void) static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask) { /* wait for the operation to complete */ - while (readl(reg) & mask) + while (readl_relaxed(reg) & mask) ; } static inline void ux500_cache_sync(void) { void __iomem *base = __io_address(UX500_L2CC_BASE); - writel(0, base + L2X0_CACHE_SYNC); + writel_relaxed(0, base + L2X0_CACHE_SYNC); ux500_cache_wait(base + L2X0_CACHE_SYNC, 1); } @@ -107,7 +107,7 @@ static void ux500_l2x0_inv_all(void) uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */ /* invalidate all ways */ - writel(l2x0_way_mask, l2x0_base + L2X0_INV_WAY); + writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY); ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask); ux500_cache_sync(); } diff --git a/arch/arm/mach-versatile/include/mach/vmalloc.h b/arch/arm/mach-versatile/include/mach/vmalloc.h index ebd8a2543d3b..7d8e069ad51b 100644 --- a/arch/arm/mach-versatile/include/mach/vmalloc.h +++ b/arch/arm/mach-versatile/include/mach/vmalloc.h @@ -18,4 +18,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END 0xd8000000 +#define VMALLOC_END 0xd8000000UL diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 17e7b0b57e49..55c17a6fb22f 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -206,8 +206,8 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn, */ if (pfn_valid(pfn)) { printk(KERN_WARNING "BUG: Your driver calls ioremap() on system memory. This leads\n" - KERN_WARNING "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n" - KERN_WARNING "will fail in the next kernel release. Please fix your driver.\n"); + "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n" + "will fail in the next kernel release. Please fix your driver.\n"); WARN_ON(1); } diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c index 02d989018059..3a705c7877dd 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-dma.c +++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c @@ -12,15 +12,7 @@ #include <mach/hardware.h> #include <mach/devices-common.h> -#ifdef SDMA_IS_MERGED #include <mach/sdma.h> -#else -struct sdma_platform_data { - int sdma_version; - char *cpu_name; - int to_version; -}; -#endif struct imx_imx_sdma_data { resource_size_t iobase; diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c index e48340ec331e..17f724c9452d 100644 --- a/arch/arm/plat-mxc/devices/platform-spi_imx.c +++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c @@ -27,6 +27,7 @@ const struct imx_spi_imx_data imx21_cspi_data[] __initconst = { imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K) imx21_cspi_data_entry(0, 1), imx21_cspi_data_entry(1, 2), +}; #endif #ifdef CONFIG_ARCH_MX25 diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c index aedf9c1d645e..63cdc6025bd7 100644 --- a/arch/arm/plat-nomadik/timer.c +++ b/arch/arm/plat-nomadik/timer.c @@ -3,6 +3,7 @@ * * Copyright (C) 2008 STMicroelectronics * Copyright (C) 2010 Alessandro Rubini + * Copyright (C) 2010 Linus Walleij for ST-Ericsson * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2, as @@ -16,11 +17,13 @@ #include <linux/clk.h> #include <linux/jiffies.h> #include <linux/err.h> +#include <linux/cnt32_to_63.h> +#include <linux/timer.h> #include <asm/mach/time.h> #include <plat/mtu.h> -void __iomem *mtu_base; /* ssigned by machine code */ +void __iomem *mtu_base; /* Assigned by machine code */ /* * Kernel assumes that sched_clock can be called early @@ -48,16 +51,82 @@ static struct clocksource nmdk_clksrc = { /* * Override the global weak sched_clock symbol with this * local implementation which uses the clocksource to get some - * better resolution when scheduling the kernel. We accept that - * this wraps around for now, since it is just a relative time - * stamp. (Inspired by OMAP implementation.) + * better resolution when scheduling the kernel. + * + * Because the hardware timer period may be quite short + * (32.3 secs on the 133 MHz MTU timer selection on ux500) + * and because cnt32_to_63() needs to be called at least once per + * half period to work properly, a kernel keepwarm() timer is set up + * to ensure this requirement is always met. + * + * Also the sched_clock timer will wrap around at some point, + * here we set it to run continously for a year. */ +#define SCHED_CLOCK_MIN_WRAP 3600*24*365 +static struct timer_list cnt32_to_63_keepwarm_timer; +static u32 sched_mult; +static u32 sched_shift; + unsigned long long notrace sched_clock(void) { - return clocksource_cyc2ns(nmdk_clksrc.read( - &nmdk_clksrc), - nmdk_clksrc.mult, - nmdk_clksrc.shift); + u64 cycles; + + if (unlikely(!mtu_base)) + return 0; + + cycles = cnt32_to_63(-readl(mtu_base + MTU_VAL(0))); + /* + * sched_mult is guaranteed to be even so will + * shift out bit 63 + */ + return (cycles * sched_mult) >> sched_shift; +} + +/* Just kick sched_clock every so often */ +static void cnt32_to_63_keepwarm(unsigned long data) +{ + mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data)); + (void) sched_clock(); +} + +/* + * Set up a timer to keep sched_clock():s 32_to_63 algorithm warm + * once in half a 32bit timer wrap interval. + */ +static void __init nmdk_sched_clock_init(unsigned long rate) +{ + u32 v; + unsigned long delta; + u64 days; + + /* Find the apropriate mult and shift factors */ + clocks_calc_mult_shift(&sched_mult, &sched_shift, + rate, NSEC_PER_SEC, SCHED_CLOCK_MIN_WRAP); + /* We need to multiply by an even number to get rid of bit 63 */ + if (sched_mult & 1) + sched_mult++; + + /* Let's see what we get, take max counter and scale it */ + days = (0xFFFFFFFFFFFFFFFFLLU * sched_mult) >> sched_shift; + do_div(days, NSEC_PER_SEC); + do_div(days, (3600*24)); + + pr_info("sched_clock: using %d bits @ %lu Hz wrap in %lu days\n", + (64 - sched_shift), rate, (unsigned long) days); + + /* + * Program a timer to kick us at half 32bit wraparound + * Formula: seconds per wrap = (2^32) / f + */ + v = 0xFFFFFFFFUL / rate; + /* We want half of the wrap time to keep cnt32_to_63 warm */ + v /= 2; + pr_debug("sched_clock: prescaled timer rate: %lu Hz, " + "initialize keepwarm timer every %d seconds\n", rate, v); + /* Convert seconds to jiffies */ + delta = msecs_to_jiffies(v*1000); + setup_timer(&cnt32_to_63_keepwarm_timer, cnt32_to_63_keepwarm, delta); + mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + delta)); } /* Clockevent device: use one-shot mode */ @@ -161,13 +230,15 @@ void __init nmdk_timer_init(void) writel(0, mtu_base + MTU_BGLR(0)); writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0)); - /* Now the scheduling clock is ready */ + /* Now the clock source is ready */ nmdk_clksrc.read = nmdk_read_timer; if (clocksource_register(&nmdk_clksrc)) pr_err("timer: failed to initialize clock source %s\n", nmdk_clksrc.name); + nmdk_sched_clock_init(rate); + /* Timer 1 is used for events */ clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE); diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h index 46d5179c9f49..e3c73cdd8c90 100644 --- a/arch/sh/include/asm/processor_32.h +++ b/arch/sh/include/asm/processor_32.h @@ -199,10 +199,13 @@ extern unsigned long get_wchan(struct task_struct *p); #define ARCH_HAS_PREFETCHW static inline void prefetch(void *x) { - __asm__ __volatile__ ("pref @%0\n\t" : : "r" (x) : "memory"); + __builtin_prefetch(x, 0, 3); } -#define prefetchw(x) prefetch(x) +static inline void prefetchw(void *x) +{ + __builtin_prefetch(x, 1, 3); +} #endif #endif /* __KERNEL__ */ diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c index 4eabc68cd753..b601fa3978d1 100644 --- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c +++ b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c @@ -110,7 +110,7 @@ static int shoc_clk_verify_rate(struct clk *clk, unsigned long rate) return 0; } -static int shoc_clk_set_rate(struct clk *clk, unsigned long rate, int algo_id) +static int shoc_clk_set_rate(struct clk *clk, unsigned long rate) { unsigned long frqcr3; unsigned int tmp; diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c index 81f58371613d..8c6a350df751 100644 --- a/arch/sh/kernel/sys_sh.c +++ b/arch/sh/kernel/sys_sh.c @@ -88,7 +88,7 @@ asmlinkage int sys_cacheflush(unsigned long addr, unsigned long len, int op) } if (op & CACHEFLUSH_I) - flush_cache_all(); + flush_icache_range(addr, addr+len); up_read(¤t->mm->mmap_sem); return 0; diff --git a/arch/sh/kernel/vsyscall/vsyscall-trapa.S b/arch/sh/kernel/vsyscall/vsyscall-trapa.S index 3b6eb34c43fa..3e70f851cdc6 100644 --- a/arch/sh/kernel/vsyscall/vsyscall-trapa.S +++ b/arch/sh/kernel/vsyscall/vsyscall-trapa.S @@ -8,9 +8,9 @@ __kernel_vsyscall: * fill out .eh_frame -- PFM. */ .LEND_vsyscall: .size __kernel_vsyscall,.-.LSTART_vsyscall - .previous .section .eh_frame,"a",@progbits + .previous .LCIE: .ualong .LCIE_end - .LCIE_start .LCIE_start: diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index 07ec8a865c1d..e11b5fcb70eb 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -329,6 +329,18 @@ endmenu # Tilera-specific configuration menu "Bus options" +config PCI + bool "PCI support" + default y + select PCI_DOMAINS + ---help--- + Enable PCI root complex support, so PCIe endpoint devices can + be attached to the Tile chip. Many, but not all, PCI devices + are supported under Tilera's root complex driver. + +config PCI_DOMAINS + bool + config NO_IOMEM def_bool !PCI diff --git a/arch/tile/include/asm/cacheflush.h b/arch/tile/include/asm/cacheflush.h index c5741da4eeac..14a3f8556ace 100644 --- a/arch/tile/include/asm/cacheflush.h +++ b/arch/tile/include/asm/cacheflush.h @@ -137,4 +137,56 @@ static inline void finv_buffer(void *buffer, size_t size) mb_incoherent(); } +/* + * Flush & invalidate a VA range that is homed remotely on a single core, + * waiting until the memory controller holds the flushed values. + */ +static inline void finv_buffer_remote(void *buffer, size_t size) +{ + char *p; + int i; + + /* + * Flush and invalidate the buffer out of the local L1/L2 + * and request the home cache to flush and invalidate as well. + */ + __finv_buffer(buffer, size); + + /* + * Wait for the home cache to acknowledge that it has processed + * all the flush-and-invalidate requests. This does not mean + * that the flushed data has reached the memory controller yet, + * but it does mean the home cache is processing the flushes. + */ + __insn_mf(); + + /* + * Issue a load to the last cache line, which can't complete + * until all the previously-issued flushes to the same memory + * controller have also completed. If we weren't striping + * memory, that one load would be sufficient, but since we may + * be, we also need to back up to the last load issued to + * another memory controller, which would be the point where + * we crossed an 8KB boundary (the granularity of striping + * across memory controllers). Keep backing up and doing this + * until we are before the beginning of the buffer, or have + * hit all the controllers. + */ + for (i = 0, p = (char *)buffer + size - 1; + i < (1 << CHIP_LOG_NUM_MSHIMS()) && p >= (char *)buffer; + ++i) { + const unsigned long STRIPE_WIDTH = 8192; + + /* Force a load instruction to issue. */ + *(volatile char *)p; + + /* Jump to end of previous stripe. */ + p -= STRIPE_WIDTH; + p = (char *)((unsigned long)p | (STRIPE_WIDTH - 1)); + } + + /* Wait for the loads (and thus flushes) to have completed. */ + __insn_mf(); +} + #endif /* _ASM_TILE_CACHEFLUSH_H */ diff --git a/arch/tile/include/asm/io.h b/arch/tile/include/asm/io.h index ee43328713ab..d3cbb9b14cbe 100644 --- a/arch/tile/include/asm/io.h +++ b/arch/tile/include/asm/io.h @@ -55,9 +55,6 @@ extern void iounmap(volatile void __iomem *addr); #define ioremap_writethrough(physaddr, size) ioremap(physaddr, size) #define ioremap_fullcache(physaddr, size) ioremap(physaddr, size) -void __iomem *ioport_map(unsigned long port, unsigned int len); -extern inline void ioport_unmap(void __iomem *addr) {} - #define mmiowb() /* Conversion between virtual and physical mappings. */ @@ -189,12 +186,22 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src, * we never run, uses them unconditionally. */ -static inline int ioport_panic(void) +static inline long ioport_panic(void) { panic("inb/outb and friends do not exist on tile"); return 0; } +static inline void __iomem *ioport_map(unsigned long port, unsigned int len) +{ + return (void __iomem *) ioport_panic(); +} + +static inline void ioport_unmap(void __iomem *addr) +{ + ioport_panic(); +} + static inline u8 inb(unsigned long addr) { return ioport_panic(); diff --git a/arch/tile/include/asm/pci-bridge.h b/arch/tile/include/asm/pci-bridge.h deleted file mode 100644 index e853b0e2793b..000000000000 --- a/arch/tile/include/asm/pci-bridge.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - */ - -#ifndef _ASM_TILE_PCI_BRIDGE_H -#define _ASM_TILE_PCI_BRIDGE_H - -#include <linux/ioport.h> -#include <linux/pci.h> - -struct device_node; -struct pci_controller; - -/* - * pci_io_base returns the memory address at which you can access - * the I/O space for PCI bus number `bus' (or NULL on error). - */ -extern void __iomem *pci_bus_io_base(unsigned int bus); -extern unsigned long pci_bus_io_base_phys(unsigned int bus); -extern unsigned long pci_bus_mem_base_phys(unsigned int bus); - -/* Allocate a new PCI host bridge structure */ -extern struct pci_controller *pcibios_alloc_controller(void); - -/* Helper function for setting up resources */ -extern void pci_init_resource(struct resource *res, unsigned long start, - unsigned long end, int flags, char *name); - -/* Get the PCI host controller for a bus */ -extern struct pci_controller *pci_bus_to_hose(int bus); - -/* - * Structure of a PCI controller (host bridge) - */ -struct pci_controller { - int index; /* PCI domain number */ - struct pci_bus *root_bus; - - int first_busno; - int last_busno; - - int hv_cfg_fd[2]; /* config{0,1} fds for this PCIe controller */ - int hv_mem_fd; /* fd to Hypervisor for MMIO operations */ - - struct pci_ops *ops; - - int irq_base; /* Base IRQ from the Hypervisor */ - int plx_gen1; /* flag for PLX Gen 1 configuration */ - - /* Address ranges that are routed to this controller/bridge. */ - struct resource mem_resources[3]; -}; - -static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus) -{ - return bus->sysdata; -} - -extern void setup_indirect_pci_nomap(struct pci_controller *hose, - void __iomem *cfg_addr, void __iomem *cfg_data); -extern void setup_indirect_pci(struct pci_controller *hose, - u32 cfg_addr, u32 cfg_data); -extern void setup_grackle(struct pci_controller *hose); - -extern unsigned char common_swizzle(struct pci_dev *, unsigned char *); - -/* - * The following code swizzles for exactly one bridge. The routine - * common_swizzle below handles multiple bridges. But there are a - * some boards that don't follow the PCI spec's suggestion so we - * break this piece out separately. - */ -static inline unsigned char bridge_swizzle(unsigned char pin, - unsigned char idsel) -{ - return (((pin-1) + idsel) % 4) + 1; -} - -/* - * The following macro is used to lookup irqs in a standard table - * format for those PPC systems that do not already have PCI - * interrupts properly routed. - */ -/* FIXME - double check this */ -#define PCI_IRQ_TABLE_LOOKUP ({ \ - long _ctl_ = -1; \ - if (idsel >= min_idsel && idsel <= max_idsel && pin <= irqs_per_slot) \ - _ctl_ = pci_irq_table[idsel - min_idsel][pin-1]; \ - _ctl_; \ -}) - -/* - * Scan the buses below a given PCI host bridge and assign suitable - * resources to all devices found. - */ -extern int pciauto_bus_scan(struct pci_controller *, int); - -#ifdef CONFIG_PCI -extern unsigned long pci_address_to_pio(phys_addr_t address); -#else -static inline unsigned long pci_address_to_pio(phys_addr_t address) -{ - return (unsigned long)-1; -} -#endif - -#endif /* _ASM_TILE_PCI_BRIDGE_H */ diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h index b0c15da2d5d5..c3fc458a0d32 100644 --- a/arch/tile/include/asm/pci.h +++ b/arch/tile/include/asm/pci.h @@ -15,7 +15,29 @@ #ifndef _ASM_TILE_PCI_H #define _ASM_TILE_PCI_H -#include <asm/pci-bridge.h> +#include <linux/pci.h> + +/* + * Structure of a PCI controller (host bridge) + */ +struct pci_controller { + int index; /* PCI domain number */ + struct pci_bus *root_bus; + + int first_busno; + int last_busno; + + int hv_cfg_fd[2]; /* config{0,1} fds for this PCIe controller */ + int hv_mem_fd; /* fd to Hypervisor for MMIO operations */ + + struct pci_ops *ops; + + int irq_base; /* Base IRQ from the Hypervisor */ + int plx_gen1; /* flag for PLX Gen 1 configuration */ + + /* Address ranges that are routed to this controller/bridge. */ + struct resource mem_resources[3]; +}; /* * The hypervisor maps the entirety of CPA-space as bus addresses, so @@ -24,56 +46,12 @@ */ #define PCI_DMA_BUS_IS_PHYS 1 -struct pci_controller *pci_bus_to_hose(int bus); -unsigned char __init common_swizzle(struct pci_dev *dev, unsigned char *pinp); int __init tile_pci_init(void); -void pci_iounmap(struct pci_dev *dev, void __iomem *addr); -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); -void __devinit pcibios_fixup_bus(struct pci_bus *bus); -int __devinit _tile_cfg_read(struct pci_controller *hose, - int bus, - int slot, - int function, - int offset, - int size, - u32 *val); -int __devinit _tile_cfg_write(struct pci_controller *hose, - int bus, - int slot, - int function, - int offset, - int size, - u32 val); +void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); +static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {} -/* - * These are used to to config reads and writes in the early stages of - * setup before the driver infrastructure has been set up enough to be - * able to do config reads and writes. - */ -#define early_cfg_read(where, size, value) \ - _tile_cfg_read(controller, \ - current_bus, \ - pci_slot, \ - pci_fn, \ - where, \ - size, \ - value) - -#define early_cfg_write(where, size, value) \ - _tile_cfg_write(controller, \ - current_bus, \ - pci_slot, \ - pci_fn, \ - where, \ - size, \ - value) - - - -#define PCICFG_BYTE 1 -#define PCICFG_WORD 2 -#define PCICFG_DWORD 4 +void __devinit pcibios_fixup_bus(struct pci_bus *bus); #define TILE_NUM_PCIE 2 @@ -88,33 +66,33 @@ static inline int pci_proc_domain(struct pci_bus *bus) } /* - * I/O space is currently not supported. + * pcibios_assign_all_busses() tells whether or not the bus numbers + * should be reassigned, in case the BIOS didn't do it correctly, or + * in case we don't have a BIOS and we want to let Linux do it. */ +static inline int pcibios_assign_all_busses(void) +{ + return 1; +} -#define TILE_PCIE_LOWER_IO 0x0 -#define TILE_PCIE_UPPER_IO 0x10000 -#define TILE_PCIE_PCIE_IO_SIZE 0x0000FFFF - -#define _PAGE_NO_CACHE 0 -#define _PAGE_GUARDED 0 - - -#define pcibios_assign_all_busses() pci_assign_all_buses -extern int pci_assign_all_buses; - +/* + * No special bus mastering setup handling. + */ static inline void pcibios_set_master(struct pci_dev *dev) { - /* No special bus mastering setup handling */ } #define PCIBIOS_MIN_MEM 0 -#define PCIBIOS_MIN_IO TILE_PCIE_LOWER_IO +#define PCIBIOS_MIN_IO 0 /* * This flag tells if the platform is TILEmpower that needs * special configuration for the PLX switch chip. */ -extern int blade_pci; +extern int tile_plx_gen1; + +/* Use any cpu for PCI. */ +#define cpumask_of_pcibus(bus) cpu_online_mask /* implement the pci_ DMA API in terms of the generic device dma_ one */ #include <asm-generic/pci-dma-compat.h> @@ -122,7 +100,4 @@ extern int blade_pci; /* generic pci stuff */ #include <asm-generic/pci.h> -/* Use any cpu for PCI. */ -#define cpumask_of_pcibus(bus) cpu_online_mask - #endif /* _ASM_TILE_PCI_H */ diff --git a/arch/tile/include/asm/processor.h b/arch/tile/include/asm/processor.h index 1747ff3946b2..a9e7c8760334 100644 --- a/arch/tile/include/asm/processor.h +++ b/arch/tile/include/asm/processor.h @@ -292,8 +292,18 @@ extern int kstack_hash; /* Are we using huge pages in the TLB for kernel data? */ extern int kdata_huge; +/* Support standard Linux prefetching. */ +#define ARCH_HAS_PREFETCH +#define prefetch(x) __builtin_prefetch(x) #define PREFETCH_STRIDE CHIP_L2_LINE_SIZE() +/* Bring a value into the L1D, faulting the TLB if necessary. */ +#ifdef __tilegx__ +#define prefetch_L1(x) __insn_prefetch_l1_fault((void *)(x)) +#else +#define prefetch_L1(x) __insn_prefetch_L1((void *)(x)) +#endif + #else /* __ASSEMBLY__ */ /* Do some slow action (e.g. read a slow SPR). */ diff --git a/arch/tile/include/hv/drv_xgbe_impl.h b/arch/tile/include/hv/drv_xgbe_impl.h new file mode 100644 index 000000000000..3a73b2b44913 --- /dev/null +++ b/arch/tile/include/hv/drv_xgbe_impl.h @@ -0,0 +1,300 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/** + * @file drivers/xgbe/impl.h + * Implementation details for the NetIO library. + */ + +#ifndef __DRV_XGBE_IMPL_H__ +#define __DRV_XGBE_IMPL_H__ + +#include <hv/netio_errors.h> +#include <hv/netio_intf.h> +#include <hv/drv_xgbe_intf.h> + + +/** How many groups we have (log2). */ +#define LOG2_NUM_GROUPS (12) +/** How many groups we have. */ +#define NUM_GROUPS (1 << LOG2_NUM_GROUPS) + +/** Number of output requests we'll buffer per tile. */ +#define EPP_REQS_PER_TILE (32) + +/** Words used in an eDMA command without checksum acceleration. */ +#define EDMA_WDS_NO_CSUM 8 +/** Words used in an eDMA command with checksum acceleration. */ +#define EDMA_WDS_CSUM 10 +/** Total available words in the eDMA command FIFO. */ +#define EDMA_WDS_TOTAL 128 + + +/* + * FIXME: These definitions are internal and should have underscores! + * NOTE: The actual numeric values here are intentional and allow us to + * optimize the concept "if small ... else if large ... else ...", by + * checking for the low bit being set, and then for non-zero. + * These are used as array indices, so they must have the values (0, 1, 2) + * in some order. + */ +#define SIZE_SMALL (1) /**< Small packet queue. */ +#define SIZE_LARGE (2) /**< Large packet queue. */ +#define SIZE_JUMBO (0) /**< Jumbo packet queue. */ + +/** The number of "SIZE_xxx" values. */ +#define NETIO_NUM_SIZES 3 + + +/* + * Default numbers of packets for IPP drivers. These values are chosen + * such that CIPP1 will not overflow its L2 cache. + */ + +/** The default number of small packets. */ +#define NETIO_DEFAULT_SMALL_PACKETS 2750 +/** The default number of large packets. */ +#define NETIO_DEFAULT_LARGE_PACKETS 2500 +/** The default number of jumbo packets. */ +#define NETIO_DEFAULT_JUMBO_PACKETS 250 + + +/** Log2 of the size of a memory arena. */ +#define NETIO_ARENA_SHIFT 24 /* 16 MB */ +/** Size of a memory arena. */ +#define NETIO_ARENA_SIZE (1 << NETIO_ARENA_SHIFT) + + +/** A queue of packets. + * + * This structure partially defines a queue of packets waiting to be + * processed. The queue as a whole is written to by an interrupt handler and + * read by non-interrupt code; this data structure is what's touched by the + * interrupt handler. The other part of the queue state, the read offset, is + * kept in user space, not in hypervisor space, so it is in a separate data + * structure. + * + * The read offset (__packet_receive_read in the user part of the queue + * structure) points to the next packet to be read. When the read offset is + * equal to the write offset, the queue is empty; therefore the queue must + * contain one more slot than the required maximum queue size. + * + * Here's an example of all 3 state variables and what they mean. All + * pointers move left to right. + * + * @code + * I I V V V V I I I I + * 0 1 2 3 4 5 6 7 8 9 10 + * ^ ^ ^ ^ + * | | | + * | | __last_packet_plus_one + * | __buffer_write + * __packet_receive_read + * @endcode + * + * This queue has 10 slots, and thus can hold 9 packets (_last_packet_plus_one + * = 10). The read pointer is at 2, and the write pointer is at 6; thus, + * there are valid, unread packets in slots 2, 3, 4, and 5. The remaining + * slots are invalid (do not contain a packet). + */ +typedef struct { + /** Byte offset of the next notify packet to be written: zero for the first + * packet on the queue, sizeof (netio_pkt_t) for the second packet on the + * queue, etc. */ + volatile uint32_t __packet_write; + + /** Offset of the packet after the last valid packet (i.e., when any + * pointer is incremented to this value, it wraps back to zero). */ + uint32_t __last_packet_plus_one; +} +__netio_packet_queue_t; + + +/** A queue of buffers. + * + * This structure partially defines a queue of empty buffers which have been + * obtained via requests to the IPP. (The elements of the queue are packet + * handles, which are transformed into a full netio_pkt_t when the buffer is + * retrieved.) The queue as a whole is written to by an interrupt handler and + * read by non-interrupt code; this data structure is what's touched by the + * interrupt handler. The other parts of the queue state, the read offset and + * requested write offset, are kept in user space, not in hypervisor space, so + * they are in a separate data structure. + * + * The read offset (__buffer_read in the user part of the queue structure) + * points to the next buffer to be read. When the read offset is equal to the + * write offset, the queue is empty; therefore the queue must contain one more + * slot than the required maximum queue size. + * + * The requested write offset (__buffer_requested_write in the user part of + * the queue structure) points to the slot which will hold the next buffer we + * request from the IPP, once we get around to sending such a request. When + * the requested write offset is equal to the write offset, no requests for + * new buffers are outstanding; when the requested write offset is one greater + * than the read offset, no more requests may be sent. + * + * Note that, unlike the packet_queue, the buffer_queue places incoming + * buffers at decreasing addresses. This makes the check for "is it time to + * wrap the buffer pointer" cheaper in the assembly code which receives new + * buffers, and means that the value which defines the queue size, + * __last_buffer, is different than in the packet queue. Also, the offset + * used in the packet_queue is already scaled by the size of a packet; here we + * use unscaled slot indices for the offsets. (These differences are + * historical, and in the future it's possible that the packet_queue will look + * more like this queue.) + * + * @code + * Here's an example of all 4 state variables and what they mean. Remember: + * all pointers move right to left. + * + * V V V I I R R V V V + * 0 1 2 3 4 5 6 7 8 9 + * ^ ^ ^ ^ + * | | | | + * | | | __last_buffer + * | | __buffer_write + * | __buffer_requested_write + * __buffer_read + * @endcode + * + * This queue has 10 slots, and thus can hold 9 buffers (_last_buffer = 9). + * The read pointer is at 2, and the write pointer is at 6; thus, there are + * valid, unread buffers in slots 2, 1, 0, 9, 8, and 7. The requested write + * pointer is at 4; thus, requests have been made to the IPP for buffers which + * will be placed in slots 6 and 5 when they arrive. Finally, the remaining + * slots are invalid (do not contain a buffer). + */ +typedef struct +{ + /** Ordinal number of the next buffer to be written: 0 for the first slot in + * the queue, 1 for the second slot in the queue, etc. */ + volatile uint32_t __buffer_write; + + /** Ordinal number of the last buffer (i.e., when any pointer is decremented + * below zero, it is reloaded with this value). */ + uint32_t __last_buffer; +} +__netio_buffer_queue_t; + + +/** + * An object for providing Ethernet packets to a process. + */ +typedef struct __netio_queue_impl_t +{ + /** The queue of packets waiting to be received. */ + __netio_packet_queue_t __packet_receive_queue; + /** The intr bit mask that IDs this device. */ + unsigned int __intr_id; + /** Offset to queues of empty buffers, one per size. */ + uint32_t __buffer_queue[NETIO_NUM_SIZES]; + /** The address of the first EPP tile, or -1 if no EPP. */ + /* ISSUE: Actually this is always "0" or "~0". */ + uint32_t __epp_location; + /** The queue ID that this queue represents. */ + unsigned int __queue_id; + /** Number of acknowledgements received. */ + volatile uint32_t __acks_received; + /** Last completion number received for packet_sendv. */ + volatile uint32_t __last_completion_rcv; + /** Number of packets allowed to be outstanding. */ + uint32_t __max_outstanding; + /** First VA available for packets. */ + void* __va_0; + /** First VA in second range available for packets. */ + void* __va_1; + /** Padding to align the "__packets" field to the size of a netio_pkt_t. */ + uint32_t __padding[3]; + /** The packets themselves. */ + netio_pkt_t __packets[0]; +} +netio_queue_impl_t; + + +/** + * An object for managing the user end of a NetIO queue. + */ +typedef struct __netio_queue_user_impl_t +{ + /** The next incoming packet to be read. */ + uint32_t __packet_receive_read; + /** The next empty buffers to be read, one index per size. */ + uint8_t __buffer_read[NETIO_NUM_SIZES]; + /** Where the empty buffer we next request from the IPP will go, one index + * per size. */ + uint8_t __buffer_requested_write[NETIO_NUM_SIZES]; + /** PCIe interface flag. */ + uint8_t __pcie; + /** Number of packets left to be received before we send a credit update. */ + uint32_t __receive_credit_remaining; + /** Value placed in __receive_credit_remaining when it reaches zero. */ + uint32_t __receive_credit_interval; + /** First fast I/O routine index. */ + uint32_t __fastio_index; + /** Number of acknowledgements expected. */ + uint32_t __acks_outstanding; + /** Last completion number requested. */ + uint32_t __last_completion_req; + /** File descriptor for driver. */ + int __fd; +} +netio_queue_user_impl_t; + + +#define NETIO_GROUP_CHUNK_SIZE 64 /**< Max # groups in one IPP request */ +#define NETIO_BUCKET_CHUNK_SIZE 64 /**< Max # buckets in one IPP request */ + + +/** Internal structure used to convey packet send information to the + * hypervisor. FIXME: Actually, it's not used for that anymore, but + * netio_packet_send() still uses it internally. + */ +typedef struct +{ + uint16_t flags; /**< Packet flags (__NETIO_SEND_FLG_xxx) */ + uint16_t transfer_size; /**< Size of packet */ + uint32_t va; /**< VA of start of packet */ + __netio_pkt_handle_t handle; /**< Packet handle */ + uint32_t csum0; /**< First checksum word */ + uint32_t csum1; /**< Second checksum word */ +} +__netio_send_cmd_t; + + +/** Flags used in two contexts: + * - As the "flags" member in the __netio_send_cmd_t, above; used only + * for netio_pkt_send_{prepare,commit}. + * - As part of the flags passed to the various send packet fast I/O calls. + */ + +/** Need acknowledgement on this packet. Note that some code in the + * normal send_pkt fast I/O handler assumes that this is equal to 1. */ +#define __NETIO_SEND_FLG_ACK 0x1 + +/** Do checksum on this packet. (Only used with the __netio_send_cmd_t; + * normal packet sends use a special fast I/O index to denote checksumming, + * and multi-segment sends test the checksum descriptor.) */ +#define __NETIO_SEND_FLG_CSUM 0x2 + +/** Get a completion on this packet. Only used with multi-segment sends. */ +#define __NETIO_SEND_FLG_COMPLETION 0x4 + +/** Position of the number-of-extra-segments value in the flags word. + Only used with multi-segment sends. */ +#define __NETIO_SEND_FLG_XSEG_SHIFT 3 + +/** Width of the number-of-extra-segments value in the flags word. */ +#define __NETIO_SEND_FLG_XSEG_WIDTH 2 + +#endif /* __DRV_XGBE_IMPL_H__ */ diff --git a/arch/tile/include/hv/drv_xgbe_intf.h b/arch/tile/include/hv/drv_xgbe_intf.h new file mode 100644 index 000000000000..146e47d5334b --- /dev/null +++ b/arch/tile/include/hv/drv_xgbe_intf.h @@ -0,0 +1,615 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/** + * @file drv_xgbe_intf.h + * Interface to the hypervisor XGBE driver. + */ + +#ifndef __DRV_XGBE_INTF_H__ +#define __DRV_XGBE_INTF_H__ + +/** + * An object for forwarding VAs and PAs to the hypervisor. + * @ingroup types + * + * This allows the supervisor to specify a number of areas of memory to + * store packet buffers. + */ +typedef struct +{ + /** The physical address of the memory. */ + HV_PhysAddr pa; + /** Page table entry for the memory. This is only used to derive the + * memory's caching mode; the PA bits are ignored. */ + HV_PTE pte; + /** The virtual address of the memory. */ + HV_VirtAddr va; + /** Size (in bytes) of the memory area. */ + int size; + +} +netio_ipp_address_t; + +/** The various pread/pwrite offsets into the hypervisor-level driver. + * @ingroup types + */ +typedef enum +{ + /** Inform the Linux driver of the address of the NetIO arena memory. + * This offset is actually only used to convey information from netio + * to the Linux driver; it never makes it from there to the hypervisor. + * Write-only; takes a uint32_t specifying the VA address. */ + NETIO_FIXED_ADDR = 0x5000000000000000ULL, + + /** Inform the Linux driver of the size of the NetIO arena memory. + * This offset is actually only used to convey information from netio + * to the Linux driver; it never makes it from there to the hypervisor. + * Write-only; takes a uint32_t specifying the VA size. */ + NETIO_FIXED_SIZE = 0x5100000000000000ULL, + + /** Register current tile with IPP. Write then read: write, takes a + * netio_input_config_t, read returns a pointer to a netio_queue_impl_t. */ + NETIO_IPP_INPUT_REGISTER_OFF = 0x6000000000000000ULL, + + /** Unregister current tile from IPP. Write-only, takes a dummy argument. */ + NETIO_IPP_INPUT_UNREGISTER_OFF = 0x6100000000000000ULL, + + /** Start packets flowing. Write-only, takes a dummy argument. */ + NETIO_IPP_INPUT_INIT_OFF = 0x6200000000000000ULL, + + /** Stop packets flowing. Write-only, takes a dummy argument. */ + NETIO_IPP_INPUT_UNINIT_OFF = 0x6300000000000000ULL, + + /** Configure group (typically we group on VLAN). Write-only: takes an + * array of netio_group_t's, low 24 bits of the offset is the base group + * number times the size of a netio_group_t. */ + NETIO_IPP_INPUT_GROUP_CFG_OFF = 0x6400000000000000ULL, + + /** Configure bucket. Write-only: takes an array of netio_bucket_t's, low + * 24 bits of the offset is the base bucket number times the size of a + * netio_bucket_t. */ + NETIO_IPP_INPUT_BUCKET_CFG_OFF = 0x6500000000000000ULL, + + /** Get/set a parameter. Read or write: read or write data is the parameter + * value, low 32 bits of the offset is a __netio_getset_offset_t. */ + NETIO_IPP_PARAM_OFF = 0x6600000000000000ULL, + + /** Get fast I/O index. Read-only; returns a 4-byte base index value. */ + NETIO_IPP_GET_FASTIO_OFF = 0x6700000000000000ULL, + + /** Configure hijack IP address. Packets with this IPv4 dest address + * go to bucket NETIO_NUM_BUCKETS - 1. Write-only: takes an IP address + * in some standard form. FIXME: Define the form! */ + NETIO_IPP_INPUT_HIJACK_CFG_OFF = 0x6800000000000000ULL, + + /** + * Offsets beyond this point are reserved for the supervisor (although that + * enforcement must be done by the supervisor driver itself). + */ + NETIO_IPP_USER_MAX_OFF = 0x6FFFFFFFFFFFFFFFULL, + + /** Register I/O memory. Write-only, takes a netio_ipp_address_t. */ + NETIO_IPP_IOMEM_REGISTER_OFF = 0x7000000000000000ULL, + + /** Unregister I/O memory. Write-only, takes a netio_ipp_address_t. */ + NETIO_IPP_IOMEM_UNREGISTER_OFF = 0x7100000000000000ULL, + + /* Offsets greater than 0x7FFFFFFF can't be used directly from Linux + * userspace code due to limitations in the pread/pwrite syscalls. */ + + /** Drain LIPP buffers. */ + NETIO_IPP_DRAIN_OFF = 0xFA00000000000000ULL, + + /** Supply a netio_ipp_address_t to be used as shared memory for the + * LEPP command queue. */ + NETIO_EPP_SHM_OFF = 0xFB00000000000000ULL, + + /* 0xFC... is currently unused. */ + + /** Stop IPP/EPP tiles. Write-only, takes a dummy argument. */ + NETIO_IPP_STOP_SHIM_OFF = 0xFD00000000000000ULL, + + /** Start IPP/EPP tiles. Write-only, takes a dummy argument. */ + NETIO_IPP_START_SHIM_OFF = 0xFE00000000000000ULL, + + /** Supply packet arena. Write-only, takes an array of + * netio_ipp_address_t values. */ + NETIO_IPP_ADDRESS_OFF = 0xFF00000000000000ULL, +} netio_hv_offset_t; + +/** Extract the base offset from an offset */ +#define NETIO_BASE_OFFSET(off) ((off) & 0xFF00000000000000ULL) +/** Extract the local offset from an offset */ +#define NETIO_LOCAL_OFFSET(off) ((off) & 0x00FFFFFFFFFFFFFFULL) + + +/** + * Get/set offset. + */ +typedef union +{ + struct + { + uint64_t addr:48; /**< Class-specific address */ + unsigned int class:8; /**< Class (e.g., NETIO_PARAM) */ + unsigned int opcode:8; /**< High 8 bits of NETIO_IPP_PARAM_OFF */ + } + bits; /**< Bitfields */ + uint64_t word; /**< Aggregated value to use as the offset */ +} +__netio_getset_offset_t; + +/** + * Fast I/O index offsets (must be contiguous). + */ +typedef enum +{ + NETIO_FASTIO_ALLOCATE = 0, /**< Get empty packet buffer */ + NETIO_FASTIO_FREE_BUFFER = 1, /**< Give buffer back to IPP */ + NETIO_FASTIO_RETURN_CREDITS = 2, /**< Give credits to IPP */ + NETIO_FASTIO_SEND_PKT_NOCK = 3, /**< Send a packet, no checksum */ + NETIO_FASTIO_SEND_PKT_CK = 4, /**< Send a packet, with checksum */ + NETIO_FASTIO_SEND_PKT_VEC = 5, /**< Send a vector of packets */ + NETIO_FASTIO_SENDV_PKT = 6, /**< Sendv one packet */ + NETIO_FASTIO_NUM_INDEX = 7, /**< Total number of fast I/O indices */ +} netio_fastio_index_t; + +/** 3-word return type for Fast I/O call. */ +typedef struct +{ + int err; /**< Error code. */ + uint32_t val0; /**< Value. Meaning depends upon the specific call. */ + uint32_t val1; /**< Value. Meaning depends upon the specific call. */ +} netio_fastio_rv3_t; + +/** 0-argument fast I/O call */ +int __netio_fastio0(uint32_t fastio_index); +/** 1-argument fast I/O call */ +int __netio_fastio1(uint32_t fastio_index, uint32_t arg0); +/** 3-argument fast I/O call, 2-word return value */ +netio_fastio_rv3_t __netio_fastio3_rv3(uint32_t fastio_index, uint32_t arg0, + uint32_t arg1, uint32_t arg2); +/** 4-argument fast I/O call */ +int __netio_fastio4(uint32_t fastio_index, uint32_t arg0, uint32_t arg1, + uint32_t arg2, uint32_t arg3); +/** 6-argument fast I/O call */ +int __netio_fastio6(uint32_t fastio_index, uint32_t arg0, uint32_t arg1, + uint32_t arg2, uint32_t arg3, uint32_t arg4, uint32_t arg5); +/** 9-argument fast I/O call */ +int __netio_fastio9(uint32_t fastio_index, uint32_t arg0, uint32_t arg1, + uint32_t arg2, uint32_t arg3, uint32_t arg4, uint32_t arg5, + uint32_t arg6, uint32_t arg7, uint32_t arg8); + +/** Allocate an empty packet. + * @param fastio_index Fast I/O index. + * @param size Size of the packet to allocate. + */ +#define __netio_fastio_allocate(fastio_index, size) \ + __netio_fastio1((fastio_index) + NETIO_FASTIO_ALLOCATE, size) + +/** Free a buffer. + * @param fastio_index Fast I/O index. + * @param handle Handle for the packet to free. + */ +#define __netio_fastio_free_buffer(fastio_index, handle) \ + __netio_fastio1((fastio_index) + NETIO_FASTIO_FREE_BUFFER, handle) + +/** Increment our receive credits. + * @param fastio_index Fast I/O index. + * @param credits Number of credits to add. + */ +#define __netio_fastio_return_credits(fastio_index, credits) \ + __netio_fastio1((fastio_index) + NETIO_FASTIO_RETURN_CREDITS, credits) + +/** Send packet, no checksum. + * @param fastio_index Fast I/O index. + * @param ackflag Nonzero if we want an ack. + * @param size Size of the packet. + * @param va Virtual address of start of packet. + * @param handle Packet handle. + */ +#define __netio_fastio_send_pkt_nock(fastio_index, ackflag, size, va, handle) \ + __netio_fastio4((fastio_index) + NETIO_FASTIO_SEND_PKT_NOCK, ackflag, \ + size, va, handle) + +/** Send packet, calculate checksum. + * @param fastio_index Fast I/O index. + * @param ackflag Nonzero if we want an ack. + * @param size Size of the packet. + * @param va Virtual address of start of packet. + * @param handle Packet handle. + * @param csum0 Shim checksum header. + * @param csum1 Checksum seed. + */ +#define __netio_fastio_send_pkt_ck(fastio_index, ackflag, size, va, handle, \ + csum0, csum1) \ + __netio_fastio6((fastio_index) + NETIO_FASTIO_SEND_PKT_CK, ackflag, \ + size, va, handle, csum0, csum1) + + +/** Format for the "csum0" argument to the __netio_fastio_send routines + * and LEPP. Note that this is currently exactly identical to the + * ShimProtocolOffloadHeader. + */ +typedef union +{ + struct + { + unsigned int start_byte:7; /**< The first byte to be checksummed */ + unsigned int count:14; /**< Number of bytes to be checksummed. */ + unsigned int destination_byte:7; /**< The byte to write the checksum to. */ + unsigned int reserved:4; /**< Reserved. */ + } bits; /**< Decomposed method of access. */ + unsigned int word; /**< To send out the IDN. */ +} __netio_checksum_header_t; + + +/** Sendv packet with 1 or 2 segments. + * @param fastio_index Fast I/O index. + * @param flags Ack/csum/notify flags in low 3 bits; number of segments minus + * 1 in next 2 bits; expected checksum in high 16 bits. + * @param confno Confirmation number to request, if notify flag set. + * @param csum0 Checksum descriptor; if zero, no checksum. + * @param va_F Virtual address of first segment. + * @param va_L Virtual address of last segment, if 2 segments. + * @param len_F_L Length of first segment in low 16 bits; length of last + * segment, if 2 segments, in high 16 bits. + */ +#define __netio_fastio_sendv_pkt_1_2(fastio_index, flags, confno, csum0, \ + va_F, va_L, len_F_L) \ + __netio_fastio6((fastio_index) + NETIO_FASTIO_SENDV_PKT, flags, confno, \ + csum0, va_F, va_L, len_F_L) + +/** Send packet on PCIe interface. + * @param fastio_index Fast I/O index. + * @param flags Ack/csum/notify flags in low 3 bits. + * @param confno Confirmation number to request, if notify flag set. + * @param csum0 Checksum descriptor; Hard wired 0, not needed for PCIe. + * @param va_F Virtual address of the packet buffer. + * @param va_L Virtual address of last segment, if 2 segments. Hard wired 0. + * @param len_F_L Length of the packet buffer in low 16 bits. + */ +#define __netio_fastio_send_pcie_pkt(fastio_index, flags, confno, csum0, \ + va_F, va_L, len_F_L) \ + __netio_fastio6((fastio_index) + PCIE_FASTIO_SENDV_PKT, flags, confno, \ + csum0, va_F, va_L, len_F_L) + +/** Sendv packet with 3 or 4 segments. + * @param fastio_index Fast I/O index. + * @param flags Ack/csum/notify flags in low 3 bits; number of segments minus + * 1 in next 2 bits; expected checksum in high 16 bits. + * @param confno Confirmation number to request, if notify flag set. + * @param csum0 Checksum descriptor; if zero, no checksum. + * @param va_F Virtual address of first segment. + * @param va_L Virtual address of last segment (third segment if 3 segments, + * fourth segment if 4 segments). + * @param len_F_L Length of first segment in low 16 bits; length of last + * segment in high 16 bits. + * @param va_M0 Virtual address of "middle 0" segment; this segment is sent + * second when there are three segments, and third if there are four. + * @param va_M1 Virtual address of "middle 1" segment; this segment is sent + * second when there are four segments. + * @param len_M0_M1 Length of middle 0 segment in low 16 bits; length of middle + * 1 segment, if 4 segments, in high 16 bits. + */ +#define __netio_fastio_sendv_pkt_3_4(fastio_index, flags, confno, csum0, va_F, \ + va_L, len_F_L, va_M0, va_M1, len_M0_M1) \ + __netio_fastio9((fastio_index) + NETIO_FASTIO_SENDV_PKT, flags, confno, \ + csum0, va_F, va_L, len_F_L, va_M0, va_M1, len_M0_M1) + +/** Send vector of packets. + * @param fastio_index Fast I/O index. + * @param seqno Number of packets transmitted so far on this interface; + * used to decide which packets should be acknowledged. + * @param nentries Number of entries in vector. + * @param va Virtual address of start of vector entry array. + * @return 3-word netio_fastio_rv3_t structure. The structure's err member + * is an error code, or zero if no error. The val0 member is the + * updated value of seqno; it has been incremented by 1 for each + * packet sent. That increment may be less than nentries if an + * error occured, or if some of the entries in the vector contain + * handles equal to NETIO_PKT_HANDLE_NONE. The val1 member is the + * updated value of nentries; it has been decremented by 1 for each + * vector entry processed. Again, that decrement may be less than + * nentries (leaving the returned value positive) if an error + * occurred. + */ +#define __netio_fastio_send_pkt_vec(fastio_index, seqno, nentries, va) \ + __netio_fastio3_rv3((fastio_index) + NETIO_FASTIO_SEND_PKT_VEC, seqno, \ + nentries, va) + + +/** An egress DMA command for LEPP. */ +typedef struct +{ + /** Is this a TSO transfer? + * + * NOTE: This field is always 0, to distinguish it from + * lepp_tso_cmd_t. It must come first! + */ + uint8_t tso : 1; + + /** Unused padding bits. */ + uint8_t _unused : 3; + + /** Should this packet be sent directly from caches instead of DRAM, + * using hash-for-home to locate the packet data? + */ + uint8_t hash_for_home : 1; + + /** Should we compute a checksum? */ + uint8_t compute_checksum : 1; + + /** Is this the final buffer for this packet? + * + * A single packet can be split over several input buffers (a "gather" + * operation). This flag indicates that this is the last buffer + * in a packet. + */ + uint8_t end_of_packet : 1; + + /** Should LEPP advance 'comp_busy' when this DMA is fully finished? */ + uint8_t send_completion : 1; + + /** High bits of Client Physical Address of the start of the buffer + * to be egressed. + * + * NOTE: Only 6 bits are actually needed here, as CPAs are + * currently 38 bits. So two bits could be scavenged from this. + */ + uint8_t cpa_hi; + + /** The number of bytes to be egressed. */ + uint16_t length; + + /** Low 32 bits of Client Physical Address of the start of the buffer + * to be egressed. + */ + uint32_t cpa_lo; + + /** Checksum information (only used if 'compute_checksum'). */ + __netio_checksum_header_t checksum_data; + +} lepp_cmd_t; + + +/** A chunk of physical memory for a TSO egress. */ +typedef struct +{ + /** The low bits of the CPA. */ + uint32_t cpa_lo; + /** The high bits of the CPA. */ + uint16_t cpa_hi : 15; + /** Should this packet be sent directly from caches instead of DRAM, + * using hash-for-home to locate the packet data? + */ + uint16_t hash_for_home : 1; + /** The length in bytes. */ + uint16_t length; +} lepp_frag_t; + + +/** An LEPP command that handles TSO. */ +typedef struct +{ + /** Is this a TSO transfer? + * + * NOTE: This field is always 1, to distinguish it from + * lepp_cmd_t. It must come first! + */ + uint8_t tso : 1; + + /** Unused padding bits. */ + uint8_t _unused : 7; + + /** Size of the header[] array in bytes. It must be in the range + * [40, 127], which are the smallest header for a TCP packet over + * Ethernet and the maximum possible prepend size supported by + * hardware, respectively. Note that the array storage must be + * padded out to a multiple of four bytes so that the following + * LEPP command is aligned properly. + */ + uint8_t header_size; + + /** Byte offset of the IP header in header[]. */ + uint8_t ip_offset; + + /** Byte offset of the TCP header in header[]. */ + uint8_t tcp_offset; + + /** The number of bytes to use for the payload of each packet, + * except of course the last one, which may not have enough bytes. + * This means that each Ethernet packet except the last will have a + * size of header_size + payload_size. + */ + uint16_t payload_size; + + /** The length of the 'frags' array that follows this struct. */ + uint16_t num_frags; + + /** The actual frags. */ + lepp_frag_t frags[0 /* Variable-sized; num_frags entries. */]; + + /* + * The packet header template logically follows frags[], + * but you can't declare that in C. + * + * uint32_t header[header_size_in_words_rounded_up]; + */ + +} lepp_tso_cmd_t; + + +/** An LEPP completion ring entry. */ +typedef void* lepp_comp_t; + + +/** Maximum number of frags for one TSO command. This is adapted from + * linux's "MAX_SKB_FRAGS", and presumably over-estimates by one, for + * our page size of exactly 65536. We add one for a "body" fragment. + */ +#define LEPP_MAX_FRAGS (65536 / HV_PAGE_SIZE_SMALL + 2 + 1) + +/** Total number of bytes needed for an lepp_tso_cmd_t. */ +#define LEPP_TSO_CMD_SIZE(num_frags, header_size) \ + (sizeof(lepp_tso_cmd_t) + \ + (num_frags) * sizeof(lepp_frag_t) + \ + (((header_size) + 3) & -4)) + +/** The size of the lepp "cmd" queue. */ +#define LEPP_CMD_QUEUE_BYTES \ + (((CHIP_L2_CACHE_SIZE() - 2 * CHIP_L2_LINE_SIZE()) / \ + (sizeof(lepp_cmd_t) + sizeof(lepp_comp_t))) * sizeof(lepp_cmd_t)) + +/** The largest possible command that can go in lepp_queue_t::cmds[]. */ +#define LEPP_MAX_CMD_SIZE LEPP_TSO_CMD_SIZE(LEPP_MAX_FRAGS, 128) + +/** The largest possible value of lepp_queue_t::cmd_{head, tail} (inclusive). + */ +#define LEPP_CMD_LIMIT \ + (LEPP_CMD_QUEUE_BYTES - LEPP_MAX_CMD_SIZE) + +/** The maximum number of completions in an LEPP queue. */ +#define LEPP_COMP_QUEUE_SIZE \ + ((LEPP_CMD_LIMIT + sizeof(lepp_cmd_t) - 1) / sizeof(lepp_cmd_t)) + +/** Increment an index modulo the queue size. */ +#define LEPP_QINC(var) \ + (var = __insn_mnz(var - (LEPP_COMP_QUEUE_SIZE - 1), var + 1)) + +/** A queue used to convey egress commands from the client to LEPP. */ +typedef struct +{ + /** Index of first completion not yet processed by user code. + * If this is equal to comp_busy, there are no such completions. + * + * NOTE: This is only read/written by the user. + */ + unsigned int comp_head; + + /** Index of first completion record not yet completed. + * If this is equal to comp_tail, there are no such completions. + * This index gets advanced (modulo LEPP_QUEUE_SIZE) whenever + * a command with the 'completion' bit set is finished. + * + * NOTE: This is only written by LEPP, only read by the user. + */ + volatile unsigned int comp_busy; + + /** Index of the first empty slot in the completion ring. + * Entries from this up to but not including comp_head (in ring order) + * can be filled in with completion data. + * + * NOTE: This is only read/written by the user. + */ + unsigned int comp_tail; + + /** Byte index of first command enqueued for LEPP but not yet processed. + * + * This is always divisible by sizeof(void*) and always <= LEPP_CMD_LIMIT. + * + * NOTE: LEPP advances this counter as soon as it no longer needs + * the cmds[] storage for this entry, but the transfer is not actually + * complete (i.e. the buffer pointed to by the command is no longer + * needed) until comp_busy advances. + * + * If this is equal to cmd_tail, the ring is empty. + * + * NOTE: This is only written by LEPP, only read by the user. + */ + volatile unsigned int cmd_head; + + /** Byte index of first empty slot in the command ring. This field can + * be incremented up to but not equal to cmd_head (because that would + * mean the ring is empty). + * + * This is always divisible by sizeof(void*) and always <= LEPP_CMD_LIMIT. + * + * NOTE: This is read/written by the user, only read by LEPP. + */ + volatile unsigned int cmd_tail; + + /** A ring of variable-sized egress DMA commands. + * + * NOTE: Only written by the user, only read by LEPP. + */ + char cmds[LEPP_CMD_QUEUE_BYTES] + __attribute__((aligned(CHIP_L2_LINE_SIZE()))); + + /** A ring of user completion data. + * NOTE: Only read/written by the user. + */ + lepp_comp_t comps[LEPP_COMP_QUEUE_SIZE] + __attribute__((aligned(CHIP_L2_LINE_SIZE()))); +} lepp_queue_t; + + +/** An internal helper function for determining the number of entries + * available in a ring buffer, given that there is one sentinel. + */ +static inline unsigned int +_lepp_num_free_slots(unsigned int head, unsigned int tail) +{ + /* + * One entry is reserved for use as a sentinel, to distinguish + * "empty" from "full". So we compute + * (head - tail - 1) % LEPP_QUEUE_SIZE, but without using a slow % operation. + */ + return (head - tail - 1) + ((head <= tail) ? LEPP_COMP_QUEUE_SIZE : 0); +} + + +/** Returns how many new comp entries can be enqueued. */ +static inline unsigned int +lepp_num_free_comp_slots(const lepp_queue_t* q) +{ + return _lepp_num_free_slots(q->comp_head, q->comp_tail); +} + +static inline int +lepp_qsub(int v1, int v2) +{ + int delta = v1 - v2; + return delta + ((delta >> 31) & LEPP_COMP_QUEUE_SIZE); +} + + +/** FIXME: Check this from linux, via a new "pwrite()" call. */ +#define LIPP_VERSION 1 + + +/** We use exactly two bytes of alignment padding. */ +#define LIPP_PACKET_PADDING 2 + +/** The minimum size of a "small" buffer (including the padding). */ +#define LIPP_SMALL_PACKET_SIZE 128 + +/* + * NOTE: The following two values should total to less than around + * 13582, to keep the total size used for "lipp_state_t" below 64K. + */ + +/** The maximum number of "small" buffers. + * This is enough for 53 network cpus with 128 credits. Note that + * if these are exhausted, we will fall back to using large buffers. + */ +#define LIPP_SMALL_BUFFERS 6785 + +/** The maximum number of "large" buffers. + * This is enough for 53 network cpus with 128 credits. + */ +#define LIPP_LARGE_BUFFERS 6785 + +#endif /* __DRV_XGBE_INTF_H__ */ diff --git a/arch/tile/include/hv/netio_errors.h b/arch/tile/include/hv/netio_errors.h new file mode 100644 index 000000000000..e1591bff61b5 --- /dev/null +++ b/arch/tile/include/hv/netio_errors.h @@ -0,0 +1,122 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/** + * Error codes returned from NetIO routines. + */ + +#ifndef __NETIO_ERRORS_H__ +#define __NETIO_ERRORS_H__ + +/** + * @addtogroup error + * + * @brief The error codes returned by NetIO functions. + * + * NetIO functions return 0 (defined as ::NETIO_NO_ERROR) on success, and + * a negative value if an error occurs. + * + * In cases where a NetIO function failed due to a error reported by + * system libraries, the error code will be the negation of the + * system errno at the time of failure. The @ref netio_strerror() + * function will deliver error strings for both NetIO and system error + * codes. + * + * @{ + */ + +/** The set of all NetIO errors. */ +typedef enum +{ + /** Operation successfully completed. */ + NETIO_NO_ERROR = 0, + + /** A packet was successfully retrieved from an input queue. */ + NETIO_PKT = 0, + + /** Largest NetIO error number. */ + NETIO_ERR_MAX = -701, + + /** The tile is not registered with the IPP. */ + NETIO_NOT_REGISTERED = -701, + + /** No packet was available to retrieve from the input queue. */ + NETIO_NOPKT = -702, + + /** The requested function is not implemented. */ + NETIO_NOT_IMPLEMENTED = -703, + + /** On a registration operation, the target queue already has the maximum + * number of tiles registered for it, and no more may be added. On a + * packet send operation, the output queue is full and nothing more can + * be queued until some of the queued packets are actually transmitted. */ + NETIO_QUEUE_FULL = -704, + + /** The calling process or thread is not bound to exactly one CPU. */ + NETIO_BAD_AFFINITY = -705, + + /** Cannot allocate memory on requested controllers. */ + NETIO_CANNOT_HOME = -706, + + /** On a registration operation, the IPP specified is not configured + * to support the options requested; for instance, the application + * wants a specific type of tagged headers which the configured IPP + * doesn't support. Or, the supplied configuration information is + * not self-consistent, or is out of range; for instance, specifying + * both NETIO_RECV and NETIO_NO_RECV, or asking for more than + * NETIO_MAX_SEND_BUFFERS to be preallocated. On a VLAN or bucket + * configure operation, the number of items, or the base item, was + * out of range. + */ + NETIO_BAD_CONFIG = -707, + + /** Too many tiles have registered to transmit packets. */ + NETIO_TOOMANY_XMIT = -708, + + /** Packet transmission was attempted on a queue which was registered + with transmit disabled. */ + NETIO_UNREG_XMIT = -709, + + /** This tile is already registered with the IPP. */ + NETIO_ALREADY_REGISTERED = -710, + + /** The Ethernet link is down. The application should try again later. */ + NETIO_LINK_DOWN = -711, + + /** An invalid memory buffer has been specified. This may be an unmapped + * virtual address, or one which does not meet alignment requirements. + * For netio_input_register(), this error may be returned when multiple + * processes specify different memory regions to be used for NetIO + * buffers. That can happen if these processes specify explicit memory + * regions with the ::NETIO_FIXED_BUFFER_VA flag, or if tmc_cmem_init() + * has not been called by a common ancestor of the processes. + */ + NETIO_FAULT = -712, + + /** Cannot combine user-managed shared memory and cache coherence. */ + NETIO_BAD_CACHE_CONFIG = -713, + + /** Smallest NetIO error number. */ + NETIO_ERR_MIN = -713, + +#ifndef __DOXYGEN__ + /** Used internally to mean that no response is needed; never returned to + * an application. */ + NETIO_NO_RESPONSE = 1 +#endif +} netio_error_t; + +/** @} */ + +#endif /* __NETIO_ERRORS_H__ */ diff --git a/arch/tile/include/hv/netio_intf.h b/arch/tile/include/hv/netio_intf.h new file mode 100644 index 000000000000..8d20972aba2c --- /dev/null +++ b/arch/tile/include/hv/netio_intf.h @@ -0,0 +1,2975 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/** + * NetIO interface structures and macros. + */ + +#ifndef __NETIO_INTF_H__ +#define __NETIO_INTF_H__ + +#include <hv/netio_errors.h> + +#ifdef __KERNEL__ +#include <linux/types.h> +#else +#include <stdint.h> +#endif + +#if !defined(__HV__) && !defined(__BOGUX__) && !defined(__KERNEL__) +#include <assert.h> +#define netio_assert assert /**< Enable assertions from macros */ +#else +#define netio_assert(...) ((void)(0)) /**< Disable assertions from macros */ +#endif + +/* + * If none of these symbols are defined, we're building libnetio in an + * environment where we have pthreads, so we'll enable locking. + */ +#if !defined(__HV__) && !defined(__BOGUX__) && !defined(__KERNEL__) && \ + !defined(__NEWLIB__) +#define _NETIO_PTHREAD /**< Include a mutex in netio_queue_t below */ + +/* + * If NETIO_UNLOCKED is defined, we don't do use per-cpu locks on + * per-packet NetIO operations. We still do pthread locking on things + * like netio_input_register, though. This is used for building + * libnetio_unlocked. + */ +#ifndef NETIO_UNLOCKED + +/* Avoid PLT overhead by using our own inlined per-cpu lock. */ +#include <sched.h> +typedef int _netio_percpu_mutex_t; + +static __inline int +_netio_percpu_mutex_init(_netio_percpu_mutex_t* lock) +{ + *lock = 0; + return 0; +} + +static __inline int +_netio_percpu_mutex_lock(_netio_percpu_mutex_t* lock) +{ + while (__builtin_expect(__insn_tns(lock), 0)) + sched_yield(); + return 0; +} + +static __inline int +_netio_percpu_mutex_unlock(_netio_percpu_mutex_t* lock) +{ + *lock = 0; + return 0; +} + +#else /* NETIO_UNLOCKED */ + +/* Don't do any locking for per-packet NetIO operations. */ +typedef int _netio_percpu_mutex_t; +#define _netio_percpu_mutex_init(L) +#define _netio_percpu_mutex_lock(L) +#define _netio_percpu_mutex_unlock(L) + +#endif /* NETIO_UNLOCKED */ +#endif /* !__HV__, !__BOGUX, !__KERNEL__, !__NEWLIB__ */ + +/** How many tiles can register for a given queue. + * @ingroup setup */ +#define NETIO_MAX_TILES_PER_QUEUE 64 + + +/** Largest permissible queue identifier. + * @ingroup setup */ +#define NETIO_MAX_QUEUE_ID 255 + + +#ifndef __DOXYGEN__ + +/* Metadata packet checksum/ethertype flags. */ + +/** The L4 checksum has not been calculated. */ +#define _NETIO_PKT_NO_L4_CSUM_SHIFT 0 +#define _NETIO_PKT_NO_L4_CSUM_RMASK 1 +#define _NETIO_PKT_NO_L4_CSUM_MASK \ + (_NETIO_PKT_NO_L4_CSUM_RMASK << _NETIO_PKT_NO_L4_CSUM_SHIFT) + +/** The L3 checksum has not been calculated. */ +#define _NETIO_PKT_NO_L3_CSUM_SHIFT 1 +#define _NETIO_PKT_NO_L3_CSUM_RMASK 1 +#define _NETIO_PKT_NO_L3_CSUM_MASK \ + (_NETIO_PKT_NO_L3_CSUM_RMASK << _NETIO_PKT_NO_L3_CSUM_SHIFT) + +/** The L3 checksum is incorrect (or perhaps has not been calculated). */ +#define _NETIO_PKT_BAD_L3_CSUM_SHIFT 2 +#define _NETIO_PKT_BAD_L3_CSUM_RMASK 1 +#define _NETIO_PKT_BAD_L3_CSUM_MASK \ + (_NETIO_PKT_BAD_L3_CSUM_RMASK << _NETIO_PKT_BAD_L3_CSUM_SHIFT) + +/** The Ethernet packet type is unrecognized. */ +#define _NETIO_PKT_TYPE_UNRECOGNIZED_SHIFT 3 +#define _NETIO_PKT_TYPE_UNRECOGNIZED_RMASK 1 +#define _NETIO_PKT_TYPE_UNRECOGNIZED_MASK \ + (_NETIO_PKT_TYPE_UNRECOGNIZED_RMASK << \ + _NETIO_PKT_TYPE_UNRECOGNIZED_SHIFT) + +/* Metadata packet type flags. */ + +/** Where the packet type bits are; this field is the index into + * _netio_pkt_info. */ +#define _NETIO_PKT_TYPE_SHIFT 4 +#define _NETIO_PKT_TYPE_RMASK 0x3F + +/** How many VLAN tags the packet has, and, if we have two, which one we + * actually grouped on. A VLAN within a proprietary (Marvell or Broadcom) + * tag is counted here. */ +#define _NETIO_PKT_VLAN_SHIFT 4 +#define _NETIO_PKT_VLAN_RMASK 0x3 +#define _NETIO_PKT_VLAN_MASK \ + (_NETIO_PKT_VLAN_RMASK << _NETIO_PKT_VLAN_SHIFT) +#define _NETIO_PKT_VLAN_NONE 0 /* No VLAN tag. */ +#define _NETIO_PKT_VLAN_ONE 1 /* One VLAN tag. */ +#define _NETIO_PKT_VLAN_TWO_OUTER 2 /* Two VLAN tags, outer one used. */ +#define _NETIO_PKT_VLAN_TWO_INNER 3 /* Two VLAN tags, inner one used. */ + +/** Which proprietary tags the packet has. */ +#define _NETIO_PKT_TAG_SHIFT 6 +#define _NETIO_PKT_TAG_RMASK 0x3 +#define _NETIO_PKT_TAG_MASK \ + (_NETIO_PKT_TAG_RMASK << _NETIO_PKT_TAG_SHIFT) +#define _NETIO_PKT_TAG_NONE 0 /* No proprietary tags. */ +#define _NETIO_PKT_TAG_MRVL 1 /* Marvell HyperG.Stack tags. */ +#define _NETIO_PKT_TAG_MRVL_EXT 2 /* HyperG.Stack extended tags. */ +#define _NETIO_PKT_TAG_BRCM 3 /* Broadcom HiGig tags. */ + +/** Whether a packet has an LLC + SNAP header. */ +#define _NETIO_PKT_SNAP_SHIFT 8 +#define _NETIO_PKT_SNAP_RMASK 0x1 +#define _NETIO_PKT_SNAP_MASK \ + (_NETIO_PKT_SNAP_RMASK << _NETIO_PKT_SNAP_SHIFT) + +/* NOTE: Bits 9 and 10 are unused. */ + +/** Length of any custom data before the L2 header, in words. */ +#define _NETIO_PKT_CUSTOM_LEN_SHIFT 11 +#define _NETIO_PKT_CUSTOM_LEN_RMASK 0x1F +#define _NETIO_PKT_CUSTOM_LEN_MASK \ + (_NETIO_PKT_CUSTOM_LEN_RMASK << _NETIO_PKT_CUSTOM_LEN_SHIFT) + +/** The L4 checksum is incorrect (or perhaps has not been calculated). */ +#define _NETIO_PKT_BAD_L4_CSUM_SHIFT 16 +#define _NETIO_PKT_BAD_L4_CSUM_RMASK 0x1 +#define _NETIO_PKT_BAD_L4_CSUM_MASK \ + (_NETIO_PKT_BAD_L4_CSUM_RMASK << _NETIO_PKT_BAD_L4_CSUM_SHIFT) + +/** Length of the L2 header, in words. */ +#define _NETIO_PKT_L2_LEN_SHIFT 17 +#define _NETIO_PKT_L2_LEN_RMASK 0x1F +#define _NETIO_PKT_L2_LEN_MASK \ + (_NETIO_PKT_L2_LEN_RMASK << _NETIO_PKT_L2_LEN_SHIFT) + + +/* Flags in minimal packet metadata. */ + +/** We need an eDMA checksum on this packet. */ +#define _NETIO_PKT_NEED_EDMA_CSUM_SHIFT 0 +#define _NETIO_PKT_NEED_EDMA_CSUM_RMASK 1 +#define _NETIO_PKT_NEED_EDMA_CSUM_MASK \ + (_NETIO_PKT_NEED_EDMA_CSUM_RMASK << _NETIO_PKT_NEED_EDMA_CSUM_SHIFT) + +/* Data within the packet information table. */ + +/* Note that, for efficiency, code which uses these fields assumes that none + * of the shift values below are zero. See uses below for an explanation. */ + +/** Offset within the L2 header of the innermost ethertype (in halfwords). */ +#define _NETIO_PKT_INFO_ETYPE_SHIFT 6 +#define _NETIO_PKT_INFO_ETYPE_RMASK 0x1F + +/** Offset within the L2 header of the VLAN tag (in halfwords). */ +#define _NETIO_PKT_INFO_VLAN_SHIFT 11 +#define _NETIO_PKT_INFO_VLAN_RMASK 0x1F + +#endif + + +/** The size of a memory buffer representing a small packet. + * @ingroup egress */ +#define SMALL_PACKET_SIZE 256 + +/** The size of a memory buffer representing a large packet. + * @ingroup egress */ +#define LARGE_PACKET_SIZE 2048 + +/** The size of a memory buffer representing a jumbo packet. + * @ingroup egress */ +#define JUMBO_PACKET_SIZE (12 * 1024) + + +/* Common ethertypes. + * @ingroup ingress */ +/** @{ */ +/** The ethertype of IPv4. */ +#define ETHERTYPE_IPv4 (0x0800) +/** The ethertype of ARP. */ +#define ETHERTYPE_ARP (0x0806) +/** The ethertype of VLANs. */ +#define ETHERTYPE_VLAN (0x8100) +/** The ethertype of a Q-in-Q header. */ +#define ETHERTYPE_Q_IN_Q (0x9100) +/** The ethertype of IPv6. */ +#define ETHERTYPE_IPv6 (0x86DD) +/** The ethertype of MPLS. */ +#define ETHERTYPE_MPLS (0x8847) +/** @} */ + + +/** The possible return values of NETIO_PKT_STATUS. + * @ingroup ingress + */ +typedef enum +{ + /** No problems were detected with this packet. */ + NETIO_PKT_STATUS_OK, + /** The packet is undersized; this is expected behavior if the packet's + * ethertype is unrecognized, but otherwise the packet is likely corrupt. */ + NETIO_PKT_STATUS_UNDERSIZE, + /** The packet is oversized and some trailing bytes have been discarded. + This is expected behavior for short packets, since it's impossible to + precisely determine the amount of padding which may have been added to + them to make them meet the minimum Ethernet packet size. */ + NETIO_PKT_STATUS_OVERSIZE, + /** The packet was judged to be corrupt by hardware (for instance, it had + a bad CRC, or part of it was discarded due to lack of buffer space in + the I/O shim) and should be discarded. */ + NETIO_PKT_STATUS_BAD +} netio_pkt_status_t; + + +/** Log2 of how many buckets we have. */ +#define NETIO_LOG2_NUM_BUCKETS (10) + +/** How many buckets we have. + * @ingroup ingress */ +#define NETIO_NUM_BUCKETS (1 << NETIO_LOG2_NUM_BUCKETS) + + +/** + * @brief A group-to-bucket identifier. + * + * @ingroup setup + * + * This tells us what to do with a given group. + */ +typedef union { + /** The header broken down into bits. */ + struct { + /** Whether we should balance on L4, if available */ + unsigned int __balance_on_l4:1; + /** Whether we should balance on L3, if available */ + unsigned int __balance_on_l3:1; + /** Whether we should balance on L2, if available */ + unsigned int __balance_on_l2:1; + /** Reserved for future use */ + unsigned int __reserved:1; + /** The base bucket to use to send traffic */ + unsigned int __bucket_base:NETIO_LOG2_NUM_BUCKETS; + /** The mask to apply to the balancing value. This must be one less + * than a power of two, e.g. 0x3 or 0xFF. + */ + unsigned int __bucket_mask:NETIO_LOG2_NUM_BUCKETS; + /** Pad to 32 bits */ + unsigned int __padding:(32 - 4 - 2 * NETIO_LOG2_NUM_BUCKETS); + } bits; + /** To send out the IDN. */ + unsigned int word; +} +netio_group_t; + + +/** + * @brief A VLAN-to-bucket identifier. + * + * @ingroup setup + * + * This tells us what to do with a given VLAN. + */ +typedef netio_group_t netio_vlan_t; + + +/** + * A bucket-to-queue mapping. + * @ingroup setup + */ +typedef unsigned char netio_bucket_t; + + +/** + * A packet size can always fit in a netio_size_t. + * @ingroup setup + */ +typedef unsigned int netio_size_t; + + +/** + * @brief Ethernet standard (ingress) packet metadata. + * + * @ingroup ingress + * + * This is additional data associated with each packet. + * This structure is opaque and accessed through the @ref ingress. + * + * Also, the buffer population operation currently assumes that standard + * metadata is at least as large as minimal metadata, and will need to be + * modified if that is no longer the case. + */ +typedef struct +{ +#ifdef __DOXYGEN__ + /** This structure is opaque. */ + unsigned char opaque[24]; +#else + /** The overall ordinal of the packet */ + unsigned int __packet_ordinal; + /** The ordinal of the packet within the group */ + unsigned int __group_ordinal; + /** The best flow hash IPP could compute. */ + unsigned int __flow_hash; + /** Flags pertaining to checksum calculation, packet type, etc. */ + unsigned int __flags; + /** The first word of "user data". */ + unsigned int __user_data_0; + /** The second word of "user data". */ + unsigned int __user_data_1; +#endif +} +netio_pkt_metadata_t; + + +/** To ensure that the L3 header is aligned mod 4, the L2 header should be + * aligned mod 4 plus 2, since every supported L2 header is 4n + 2 bytes + * long. The standard way to do this is to simply add 2 bytes of padding + * before the L2 header. + */ +#define NETIO_PACKET_PADDING 2 + + + +/** + * @brief Ethernet minimal (egress) packet metadata. + * + * @ingroup egress + * + * This structure represents information about packets which have + * been processed by @ref netio_populate_buffer() or + * @ref netio_populate_prepend_buffer(). This structure is opaque + * and accessed through the @ref egress. + * + * @internal This structure is actually copied into the memory used by + * standard metadata, which is assumed to be large enough. + */ +typedef struct +{ +#ifdef __DOXYGEN__ + /** This structure is opaque. */ + unsigned char opaque[14]; +#else + /** The offset of the L2 header from the start of the packet data. */ + unsigned short l2_offset; + /** The offset of the L3 header from the start of the packet data. */ + unsigned short l3_offset; + /** Where to write the checksum. */ + unsigned char csum_location; + /** Where to start checksumming from. */ + unsigned char csum_start; + /** Flags pertaining to checksum calculation etc. */ + unsigned short flags; + /** The L2 length of the packet. */ + unsigned short l2_length; + /** The checksum with which to seed the checksum generator. */ + unsigned short csum_seed; + /** How much to checksum. */ + unsigned short csum_length; +#endif +} +netio_pkt_minimal_metadata_t; + + +#ifndef __DOXYGEN__ + +/** + * @brief An I/O notification header. + * + * This is the first word of data received from an I/O shim in a notification + * packet. It contains framing and status information. + */ +typedef union +{ + unsigned int word; /**< The whole word. */ + /** The various fields. */ + struct + { + unsigned int __channel:7; /**< Resource channel. */ + unsigned int __type:4; /**< Type. */ + unsigned int __ack:1; /**< Whether an acknowledgement is needed. */ + unsigned int __reserved:1; /**< Reserved. */ + unsigned int __protocol:1; /**< A protocol-specific word is added. */ + unsigned int __status:2; /**< Status of the transfer. */ + unsigned int __framing:2; /**< Framing of the transfer. */ + unsigned int __transfer_size:14; /**< Transfer size in bytes (total). */ + } bits; +} +__netio_pkt_notif_t; + + +/** + * Returns the base address of the packet. + */ +#define _NETIO_PKT_HANDLE_BASE(p) \ + ((unsigned char*)((p).word & 0xFFFFFFC0)) + +/** + * Returns the base address of the packet. + */ +#define _NETIO_PKT_BASE(p) \ + _NETIO_PKT_HANDLE_BASE(p->__packet) + +/** + * @brief An I/O notification packet (second word) + * + * This is the second word of data received from an I/O shim in a notification + * packet. This is the virtual address of the packet buffer, plus some flag + * bits. (The virtual address of the packet is always 256-byte aligned so we + * have room for 8 bits' worth of flags in the low 8 bits.) + * + * @internal + * NOTE: The low two bits must contain "__queue", so the "packet size" + * (SIZE_SMALL, SIZE_LARGE, or SIZE_JUMBO) can be determined quickly. + * + * If __addr or __offset are moved, _NETIO_PKT_BASE + * (defined right below this) must be changed. + */ +typedef union +{ + unsigned int word; /**< The whole word. */ + /** The various fields. */ + struct + { + /** Which queue the packet will be returned to once it is sent back to + the IPP. This is one of the SIZE_xxx values. */ + unsigned int __queue:2; + + /** The IPP handle of the sending IPP. */ + unsigned int __ipp_handle:2; + + /** Reserved for future use. */ + unsigned int __reserved:1; + + /** If 1, this packet has minimal (egress) metadata; otherwise, it + has standard (ingress) metadata. */ + unsigned int __minimal:1; + + /** Offset of the metadata within the packet. This value is multiplied + * by 64 and added to the base packet address to get the metadata + * address. Note that this field is aligned within the word such that + * you can easily extract the metadata address with a 26-bit mask. */ + unsigned int __offset:2; + + /** The top 24 bits of the packet's virtual address. */ + unsigned int __addr:24; + } bits; +} +__netio_pkt_handle_t; + +#endif /* !__DOXYGEN__ */ + + +/** + * @brief A handle for an I/O packet's storage. + * @ingroup ingress + * + * netio_pkt_handle_t encodes the concept of a ::netio_pkt_t with its + * packet metadata removed. It is a much smaller type that exists to + * facilitate applications where the full ::netio_pkt_t type is too + * large, such as those that cache enormous numbers of packets or wish + * to transmit packet descriptors over the UDN. + * + * Because there is no metadata, most ::netio_pkt_t operations cannot be + * performed on a netio_pkt_handle_t. It supports only + * netio_free_handle() (to free the buffer) and + * NETIO_PKT_CUSTOM_DATA_H() (to access a pointer to its contents). + * The application must acquire any additional metadata it wants from the + * original ::netio_pkt_t and record it separately. + * + * A netio_pkt_handle_t can be extracted from a ::netio_pkt_t by calling + * NETIO_PKT_HANDLE(). An invalid handle (analogous to NULL) can be + * created by assigning the value ::NETIO_PKT_HANDLE_NONE. A handle can + * be tested for validity with NETIO_PKT_HANDLE_IS_VALID(). + */ +typedef struct +{ + unsigned int word; /**< Opaque bits. */ +} netio_pkt_handle_t; + +/** + * @brief A packet descriptor. + * + * @ingroup ingress + * @ingroup egress + * + * This data structure represents a packet. The structure is manipulated + * through the @ref ingress and the @ref egress. + * + * While the contents of a netio_pkt_t are opaque, the structure itself is + * portable. This means that it may be shared between all tiles which have + * done a netio_input_register() call for the interface on which the pkt_t + * was initially received (via netio_get_packet()) or retrieved (via + * netio_get_buffer()). The contents of a netio_pkt_t can be transmitted to + * another tile via shared memory, or via a UDN message, or by other means. + * The destination tile may then use the pkt_t as if it had originally been + * received locally; it may read or write the packet's data, read its + * metadata, free the packet, send the packet, transfer the netio_pkt_t to + * yet another tile, and so forth. + * + * Once a netio_pkt_t has been transferred to a second tile, the first tile + * should not reference the original copy; in particular, if more than one + * tile frees or sends the same netio_pkt_t, the IPP's packet free lists will + * become corrupted. Note also that each tile which reads or modifies + * packet data must obey the memory coherency rules outlined in @ref input. + */ +typedef struct +{ +#ifdef __DOXYGEN__ + /** This structure is opaque. */ + unsigned char opaque[32]; +#else + /** For an ingress packet (one with standard metadata), this is the + * notification header we got from the I/O shim. For an egress packet + * (one with minimal metadata), this word is zero if the packet has not + * been populated, and nonzero if it has. */ + __netio_pkt_notif_t __notif_header; + + /** Virtual address of the packet buffer, plus state flags. */ + __netio_pkt_handle_t __packet; + + /** Metadata associated with the packet. */ + netio_pkt_metadata_t __metadata; +#endif +} +netio_pkt_t; + + +#ifndef __DOXYGEN__ + +#define __NETIO_PKT_NOTIF_HEADER(pkt) ((pkt)->__notif_header) +#define __NETIO_PKT_IPP_HANDLE(pkt) ((pkt)->__packet.bits.__ipp_handle) +#define __NETIO_PKT_QUEUE(pkt) ((pkt)->__packet.bits.__queue) +#define __NETIO_PKT_NOTIF_HEADER_M(mda, pkt) ((pkt)->__notif_header) +#define __NETIO_PKT_IPP_HANDLE_M(mda, pkt) ((pkt)->__packet.bits.__ipp_handle) +#define __NETIO_PKT_MINIMAL(pkt) ((pkt)->__packet.bits.__minimal) +#define __NETIO_PKT_QUEUE_M(mda, pkt) ((pkt)->__packet.bits.__queue) +#define __NETIO_PKT_FLAGS_M(mda, pkt) ((mda)->__flags) + +/* Packet information table, used by the attribute access functions below. */ +extern const uint16_t _netio_pkt_info[]; + +#endif /* __DOXYGEN__ */ + + +#ifndef __DOXYGEN__ +/* These macros are deprecated and will disappear in a future MDE release. */ +#define NETIO_PKT_GOOD_CHECKSUM(pkt) \ + NETIO_PKT_L4_CSUM_CORRECT(pkt) +#define NETIO_PKT_GOOD_CHECKSUM_M(mda, pkt) \ + NETIO_PKT_L4_CSUM_CORRECT_M(mda, pkt) +#endif /* __DOXYGEN__ */ + + +/* Packet attribute access functions. */ + +/** Return a pointer to the metadata for a packet. + * @ingroup ingress + * + * Calling this function once and passing the result to other retrieval + * functions with a "_M" suffix usually improves performance. This + * function must be called on an 'ingress' packet (i.e. one retrieved + * by @ref netio_get_packet(), on which @ref netio_populate_buffer() or + * @ref netio_populate_prepend_buffer have not been called). Use of this + * function on an 'egress' packet will cause an assertion failure. + * + * @param[in] pkt Packet on which to operate. + * @return A pointer to the packet's standard metadata. + */ +static __inline netio_pkt_metadata_t* +NETIO_PKT_METADATA(netio_pkt_t* pkt) +{ + netio_assert(!pkt->__packet.bits.__minimal); + return &pkt->__metadata; +} + + +/** Return a pointer to the minimal metadata for a packet. + * @ingroup egress + * + * Calling this function once and passing the result to other retrieval + * functions with a "_MM" suffix usually improves performance. This + * function must be called on an 'egress' packet (i.e. one on which + * @ref netio_populate_buffer() or @ref netio_populate_prepend_buffer() + * have been called, or one retrieved by @ref netio_get_buffer()). Use of + * this function on an 'ingress' packet will cause an assertion failure. + * + * @param[in] pkt Packet on which to operate. + * @return A pointer to the packet's standard metadata. + */ +static __inline netio_pkt_minimal_metadata_t* +NETIO_PKT_MINIMAL_METADATA(netio_pkt_t* pkt) +{ + netio_assert(pkt->__packet.bits.__minimal); + return (netio_pkt_minimal_metadata_t*) &pkt->__metadata; +} + + +/** Determine whether a packet has 'minimal' metadata. + * @ingroup pktfuncs + * + * This function will return nonzero if the packet is an 'egress' + * packet (i.e. one on which @ref netio_populate_buffer() or + * @ref netio_populate_prepend_buffer() have been called, or one + * retrieved by @ref netio_get_buffer()), and zero if the packet + * is an 'ingress' packet (i.e. one retrieved by @ref netio_get_packet(), + * which has not been converted into an 'egress' packet). + * + * @param[in] pkt Packet on which to operate. + * @return Nonzero if the packet has minimal metadata. + */ +static __inline unsigned int +NETIO_PKT_IS_MINIMAL(netio_pkt_t* pkt) +{ + return pkt->__packet.bits.__minimal; +} + + +/** Return a handle for a packet's storage. + * @ingroup pktfuncs + * + * @param[in] pkt Packet on which to operate. + * @return A handle for the packet's storage. + */ +static __inline netio_pkt_handle_t +NETIO_PKT_HANDLE(netio_pkt_t* pkt) +{ + netio_pkt_handle_t h; + h.word = pkt->__packet.word; + return h; +} + + +/** A special reserved value indicating the absence of a packet handle. + * + * @ingroup pktfuncs + */ +#define NETIO_PKT_HANDLE_NONE ((netio_pkt_handle_t) { 0 }) + + +/** Test whether a packet handle is valid. + * + * Applications may wish to use the reserved value NETIO_PKT_HANDLE_NONE + * to indicate no packet at all. This function tests to see if a packet + * handle is a real handle, not this special reserved value. + * + * @ingroup pktfuncs + * + * @param[in] handle Handle on which to operate. + * @return One if the packet handle is valid, else zero. + */ +static __inline unsigned int +NETIO_PKT_HANDLE_IS_VALID(netio_pkt_handle_t handle) +{ + return handle.word != 0; +} + + + +/** Return a pointer to the start of the packet's custom header. + * A custom header may or may not be present, depending upon the IPP; its + * contents and alignment are also IPP-dependent. Currently, none of the + * standard IPPs supplied by Tilera produce a custom header. If present, + * the custom header precedes the L2 header in the packet buffer. + * @ingroup ingress + * + * @param[in] handle Handle on which to operate. + * @return A pointer to start of the packet. + */ +static __inline unsigned char* +NETIO_PKT_CUSTOM_DATA_H(netio_pkt_handle_t handle) +{ + return _NETIO_PKT_HANDLE_BASE(handle) + NETIO_PACKET_PADDING; +} + + +/** Return the length of the packet's custom header. + * A custom header may or may not be present, depending upon the IPP; its + * contents and alignment are also IPP-dependent. Currently, none of the + * standard IPPs supplied by Tilera produce a custom header. If present, + * the custom header precedes the L2 header in the packet buffer. + * + * @ingroup ingress + * + * @param[in] mda Pointer to packet's standard metadata. + * @param[in] pkt Packet on which to operate. + * @return The length of the packet's custom header, in bytes. + */ +static __inline netio_size_t +NETIO_PKT_CUSTOM_HEADER_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ + /* + * Note that we effectively need to extract a quantity from the flags word + * which is measured in words, and then turn it into bytes by shifting + * it left by 2. We do this all at once by just shifting right two less + * bits, and shifting the mask up two bits. + */ + return ((mda->__flags >> (_NETIO_PKT_CUSTOM_LEN_SHIFT - 2)) & + (_NETIO_PKT_CUSTOM_LEN_RMASK << 2)); +} + + +/** Return the length of the packet, starting with the custom header. + * A custom header may or may not be present, depending upon the IPP; its + * contents and alignment are also IPP-dependent. Currently, none of the + * standard IPPs supplied by Tilera produce a custom header. If present, + * the custom header precedes the L2 header in the packet buffer. + * @ingroup ingress + * + * @param[in] mda Pointer to packet's standard metadata. + * @param[in] pkt Packet on which to operate. + * @return The length of the packet, in bytes. + */ +static __inline netio_size_t +NETIO_PKT_CUSTOM_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ + return (__NETIO_PKT_NOTIF_HEADER(pkt).bits.__transfer_size - + NETIO_PACKET_PADDING); +} + + +/** Return a pointer to the start of the packet's custom header. + * A custom header may or may not be present, depending upon the IPP; its + * contents and alignment are also IPP-dependent. Currently, none of the + * standard IPPs supplied by Tilera produce a custom header. If present, + * the custom header precedes the L2 header in the packet buffer. + * @ingroup ingress + * + * @param[in] mda Pointer to packet's standard metadata. + * @param[in] pkt Packet on which to operate. + * @return A pointer to start of the packet. + */ +static __inline unsigned char* +NETIO_PKT_CUSTOM_DATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ + return NETIO_PKT_CUSTOM_DATA_H(NETIO_PKT_HANDLE(pkt)); +} + + +/** Return the length of the packet's L2 (Ethernet plus VLAN or SNAP) header. + * @ingroup ingress + * + * @param[in] mda Pointer to packet's standard metadata. + * @param[in] pkt Packet on which to operate. + * @return The length of the packet's L2 header, in bytes. + */ +static __inline netio_size_t +NETIO_PKT_L2_HEADER_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ + /* + * Note that we effectively need to extract a quantity from the flags word + * which is measured in words, and then turn it into bytes by shifting + * it left by 2. We do this all at once by just shifting right two less + * bits, and shifting the mask up two bits. We then add two bytes. + */ + return ((mda->__flags >> (_NETIO_PKT_L2_LEN_SHIFT - 2)) & + (_NETIO_PKT_L2_LEN_RMASK << 2)) + 2; +} + + +/** Return the length of the packet, starting with the L2 (Ethernet) header. + * @ingroup ingress + * + * @param[in] mda Pointer to packet's standard metadata. + * @param[in] pkt Packet on which to operate. + * @return The length of the packet, in bytes. + */ +static __inline netio_size_t +NETIO_PKT_L2_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ + return (NETIO_PKT_CUSTOM_LENGTH_M(mda, pkt) - + NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda,pkt)); +} + + +/** Return a pointer to the start of the packet's L2 (Ethernet) header. + * @ingroup ingress + * + * @param[in] mda Pointer to packet's standard metadata. + * @param[in] pkt Packet on which to operate. + * @return A pointer to start of the packet. + */ +static __inline unsigned char* +NETIO_PKT_L2_DATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ + return (NETIO_PKT_CUSTOM_DATA_M(mda, pkt) + + NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda, pkt)); +} + + +/** Retrieve the length of the packet, starting with the L3 (generally, + * the IP) header. + * @ingroup ingress + * + * @param[in] mda Pointer to packet's standard metadata. + * @param[in] pkt Packet on which to operate. + * @return Length of the packet's L3 header and data, in bytes. + */ +static __inline netio_size_t +NETIO_PKT_L3_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ + return (NETIO_PKT_L2_LENGTH_M(mda, pkt) - + NETIO_PKT_L2_HEADER_LENGTH_M(mda,pkt)); +} + + +/** Return a pointer to the packet's L3 (generally, the IP) header. + * @ingroup ingress + * + * Note that we guarantee word alignment of the L3 header. + * + * @param[in] mda Pointer to packet's standard metadata. + * @param[in] pkt Packet on which to operate. + * @return A pointer to the packet's L3 header. + */ +static __inline unsigned char* +NETIO_PKT_L3_DATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ + return (NETIO_PKT_L2_DATA_M(mda, pkt) + + NETIO_PKT_L2_HEADER_LENGTH_M(mda, pkt)); +} + + +/** Return the ordinal of the packet. + * @ingroup ingress + * + * Each packet is given an ordinal number when it is delivered by the IPP. + * In the medium term, the ordinal is unique and monotonically increasing, + * being incremented by 1 for each packet; the ordinal of the first packet + * delivered after the IPP starts is zero. (Since the ordinal is of finite + * size, given enough input packets, it will eventually wrap around to zero; + * in the long term, therefore, ordinals are not unique.) The ordinals + * handed out by different IPPs are not disjoint, so two packets from + * different IPPs may have identical ordinals. Packets dropped by the + * IPP or by the I/O shim are not assigned ordinals. + * + * @param[in] mda Pointer to packet's standard metadata. + * @param[in] pkt Packet on which to operate. + * @return The packet's per-IPP packet ordinal. + */ +static __inline unsigned int +NETIO_PKT_ORDINAL_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ + return mda->__packet_ordinal; +} + + +/** Return the per-group ordinal of the packet. + * @ingroup ingress + * + * Each packet is given a per-group ordinal number when it is + * delivered by the IPP. By default, the group is the packet's VLAN, + * although IPP can be recompiled to use different values. In + * the medium term, the ordinal is unique and monotonically + * increasing, being incremented by 1 for each packet; the ordinal of + * the first packet distributed to a particular group is zero. + * (Since the ordinal is of finite size, given enough input packets, + * it will eventually wrap around to zero; in the long term, + * therefore, ordinals are not unique.) The ordinals handed out by + * different IPPs are not disjoint, so two packets from different IPPs + * may have identical ordinals; similarly, packets distributed to + * different groups may have identical ordinals. Packets dropped by + * the IPP or by the I/O shim are not assigned ordinals. + * + * @param[in] mda Pointer to packet's standard metadata. + * @param[in] pkt Packet on which to operate. + * @return The packet's per-IPP, per-group ordinal. + */ +static __inline unsigned int +NETIO_PKT_GROUP_ORDINAL_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ + return mda->__group_ordinal; +} + + +/** Return the VLAN ID assigned to the packet. + * @ingroup ingress + * + * This value is usually contained within the packet header. + * + * This value will be zero if the packet does not have a VLAN tag, or if + * this value was not extracted from the packet. + * + * @param[in] mda Pointer to packet's standard metadata. + * @param[in] pkt Packet on which to operate. + * @return The packet's VLAN ID. + */ +static __inline unsigned short +NETIO_PKT_VLAN_ID_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ + int vl = (mda->__flags >> _NETIO_PKT_VLAN_SHIFT) & _NETIO_PKT_VLAN_RMASK; + unsigned short* pkt_p; + int index; + unsigned short val; + + if (vl == _NETIO_PKT_VLAN_NONE) + return 0; + + pkt_p = (unsigned short*) NETIO_PKT_L2_DATA_M(mda, pkt); + index = (mda->__flags >> _NETIO_PKT_TYPE_SHIFT) & _NETIO_PKT_TYPE_RMASK; + + val = pkt_p[(_netio_pkt_info[index] >> _NETIO_PKT_INFO_VLAN_SHIFT) & + _NETIO_PKT_INFO_VLAN_RMASK]; + +#ifdef __TILECC__ + return (__insn_bytex(val) >> 16) & 0xFFF; +#else + return (__builtin_bswap32(val) >> 16) & 0xFFF; +#endif +} + + +/** Return the ethertype of the packet. + * @ingroup ingress + * + * This value is usually contained within the packet header. + * + * This value is reliable if @ref NETIO_PKT_ETHERTYPE_RECOGNIZED_M() + * returns true, and otherwise, may not be well defined. + * + * @param[in] mda Pointer to packet's standard metadata. + * @param[in] pkt Packet on which to operate. + * @return The packet's ethertype. + */ +static __inline unsigned short +NETIO_PKT_ETHERTYPE_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ + unsigned short* pkt_p = (unsigned short*) NETIO_PKT_L2_DATA_M(mda, pkt); + int index = (mda->__flags >> _NETIO_PKT_TYPE_SHIFT) & _NETIO_PKT_TYPE_RMASK; + + unsigned short val = + pkt_p[(_netio_pkt_info[index] >> _NETIO_PKT_INFO_ETYPE_SHIFT) & + _NETIO_PKT_INFO_ETYPE_RMASK]; + + return __builtin_bswap32(val) >> 16; +} + + +/** Return the flow hash computed on the packet. + * @ingroup ingress + * + * For TCP and UDP packets, this hash is calculated by hashing together + * the "5-tuple" values, specifically the source IP address, destination + * IP address, protocol type, source port and destination port. + * The hash value is intended to be helpful for millions of distinct + * flows. + * + * For IPv4 or IPv6 packets which are neither TCP nor UDP, the flow hash is + * derived by hashing together the source and destination IP addresses. + * + * For MPLS-encapsulated packets, the flow hash is derived by hashing + * the first MPLS label. + * + * For all other packets the flow hash is computed from the source + * and destination Ethernet addresses. + * + * The hash is symmetric, meaning it produces the same value if the + * source and destination are swapped. The only exceptions are + * tunneling protocols 0x04 (IP in IP Encapsulation), 0x29 (Simple + * Internet Protocol), 0x2F (General Routing Encapsulation) and 0x32 + * (Encap Security Payload), which use only the destination address + * since the source address is not meaningful. + * + * @param[in] mda Pointer to packet's standard metadata. + * @param[in] pkt Packet on which to operate. + * @return The packet's 32-bit flow hash. + */ +static __inline unsigned int +NETIO_PKT_FLOW_HASH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ + return mda->__flow_hash; +} + + +/** Return the first word of "user data" for the packet. + * + * The contents of the user data words depend on the IPP. + * + * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the first + * word of user data contains the least significant bits of the 64-bit + * arrival cycle count (see @c get_cycle_count_low()). + * + * See the <em>System Programmer's Guide</em> for details. + * + * @ingroup ingress + * + * @param[in] mda Pointer to packet's standard metadata. + * @param[in] pkt Packet on which to operate. + * @return The packet's first word of "user data". + */ +static __inline unsigned int +NETIO_PKT_USER_DATA_0_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ + return mda->__user_data_0; +} + + +/** Return the second word of "user data" for the packet. + * + * The contents of the user data words depend on the IPP. + * + * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the second + * word of user data contains the most significant bits of the 64-bit + * arrival cycle count (see @c get_cycle_count_high()). + * + * See the <em>System Programmer's Guide</em> for details. + * + * @ingroup ingress + * + * @param[in] mda Pointer to packet's standard metadata. + * @param[in] pkt Packet on which to operate. + * @return The packet's second word of "user data". + */ +static __inline unsigned int +NETIO_PKT_USER_DATA_1_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ + return mda->__user_data_1; +} + + +/** Determine whether the L4 (TCP/UDP) checksum was calculated. + * @ingroup ingress + * + * @param[in] mda Pointer to packet's standard metadata. + * @param[in] pkt Packet on which to operate. + * @return Nonzero if the L4 checksum was calculated. + */ +static __inline unsigned int +NETIO_PKT_L4_CSUM_CALCULATED_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ + return !(mda->__flags & _NETIO_PKT_NO_L4_CSUM_MASK); +} + + +/** Determine whether the L4 (TCP/UDP) checksum was calculated and found to + * be correct. + * @ingroup ingress + * + * @param[in] mda Pointer to packet's standard metadata. + * @param[in] pkt Packet on which to operate. + * @return Nonzero if the checksum was calculated and is correct. + */ +static __inline unsigned int +NETIO_PKT_L4_CSUM_CORRECT_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ + return !(mda->__flags & + (_NETIO_PKT_BAD_L4_CSUM_MASK | _NETIO_PKT_NO_L4_CSUM_MASK)); +} + + +/** Determine whether the L3 (IP) checksum was calculated. + * @ingroup ingress + * + * @param[in] mda Pointer to packet's standard metadata. + * @param[in] pkt Packet on which to operate. + * @return Nonzero if the L3 (IP) checksum was calculated. +*/ +static __inline unsigned int +NETIO_PKT_L3_CSUM_CALCULATED_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ + return !(mda->__flags & _NETIO_PKT_NO_L3_CSUM_MASK); +} + + +/** Determine whether the L3 (IP) checksum was calculated and found to be + * correct. + * @ingroup ingress + * + * @param[in] mda Pointer to packet's standard metadata. + * @param[in] pkt Packet on which to operate. + * @return Nonzero if the checksum was calculated and is correct. + */ +static __inline unsigned int +NETIO_PKT_L3_CSUM_CORRECT_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ + return !(mda->__flags & + (_NETIO_PKT_BAD_L3_CSUM_MASK | _NETIO_PKT_NO_L3_CSUM_MASK)); +} + + +/** Determine whether the ethertype was recognized and L3 packet data was + * processed. + * @ingroup ingress + * + * @param[in] mda Pointer to packet's standard metadata. + * @param[in] pkt Packet on which to operate. + * @return Nonzero if the ethertype was recognized and L3 packet data was + * processed. + */ +static __inline unsigned int +NETIO_PKT_ETHERTYPE_RECOGNIZED_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ + return !(mda->__flags & _NETIO_PKT_TYPE_UNRECOGNIZED_MASK); +} + + +/** Retrieve the status of a packet and any errors that may have occurred + * during ingress processing (length mismatches, CRC errors, etc.). + * @ingroup ingress + * + * Note that packets for which @ref NETIO_PKT_ETHERTYPE_RECOGNIZED() + * returns zero are always reported as underlength, as there is no a priori + * means to determine their length. Normally, applications should use + * @ref NETIO_PKT_BAD_M() instead of explicitly checking status with this + * function. + * + * @param[in] mda Pointer to packet's standard metadata. + * @param[in] pkt Packet on which to operate. + * @return The packet's status. + */ +static __inline netio_pkt_status_t +NETIO_PKT_STATUS_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ + return (netio_pkt_status_t) __NETIO_PKT_NOTIF_HEADER(pkt).bits.__status; +} + + +/** Report whether a packet is bad (i.e., was shorter than expected based on + * its headers, or had a bad CRC). + * @ingroup ingress + * + * Note that this function does not verify L3 or L4 checksums. + * + * @param[in] mda Pointer to packet's standard metadata. + * @param[in] pkt Packet on which to operate. + * @return Nonzero if the packet is bad and should be discarded. + */ +static __inline unsigned int +NETIO_PKT_BAD_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ + return ((NETIO_PKT_STATUS_M(mda, pkt) & 1) && + (NETIO_PKT_ETHERTYPE_RECOGNIZED_M(mda, pkt) || + NETIO_PKT_STATUS_M(mda, pkt) == NETIO_PKT_STATUS_BAD)); +} + + +/** Return the length of the packet, starting with the L2 (Ethernet) header. + * @ingroup egress + * + * @param[in] mmd Pointer to packet's minimal metadata. + * @param[in] pkt Packet on which to operate. + * @return The length of the packet, in bytes. + */ +static __inline netio_size_t +NETIO_PKT_L2_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt) +{ + return mmd->l2_length; +} + + +/** Return the length of the L2 (Ethernet) header. + * @ingroup egress + * + * @param[in] mmd Pointer to packet's minimal metadata. + * @param[in] pkt Packet on which to operate. + * @return The length of the packet's L2 header, in bytes. + */ +static __inline netio_size_t +NETIO_PKT_L2_HEADER_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, + netio_pkt_t* pkt) +{ + return mmd->l3_offset - mmd->l2_offset; +} + + +/** Return the length of the packet, starting with the L3 (IP) header. + * @ingroup egress + * + * @param[in] mmd Pointer to packet's minimal metadata. + * @param[in] pkt Packet on which to operate. + * @return Length of the packet's L3 header and data, in bytes. + */ +static __inline netio_size_t +NETIO_PKT_L3_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt) +{ + return (NETIO_PKT_L2_LENGTH_MM(mmd, pkt) - + NETIO_PKT_L2_HEADER_LENGTH_MM(mmd, pkt)); +} + + +/** Return a pointer to the packet's L3 (generally, the IP) header. + * @ingroup egress + * + * Note that we guarantee word alignment of the L3 header. + * + * @param[in] mmd Pointer to packet's minimal metadata. + * @param[in] pkt Packet on which to operate. + * @return A pointer to the packet's L3 header. + */ +static __inline unsigned char* +NETIO_PKT_L3_DATA_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt) +{ + return _NETIO_PKT_BASE(pkt) + mmd->l3_offset; +} + + +/** Return a pointer to the packet's L2 (Ethernet) header. + * @ingroup egress + * + * @param[in] mmd Pointer to packet's minimal metadata. + * @param[in] pkt Packet on which to operate. + * @return A pointer to start of the packet. + */ +static __inline unsigned char* +NETIO_PKT_L2_DATA_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt) +{ + return _NETIO_PKT_BASE(pkt) + mmd->l2_offset; +} + + +/** Retrieve the status of a packet and any errors that may have occurred + * during ingress processing (length mismatches, CRC errors, etc.). + * @ingroup ingress + * + * Note that packets for which @ref NETIO_PKT_ETHERTYPE_RECOGNIZED() + * returns zero are always reported as underlength, as there is no a priori + * means to determine their length. Normally, applications should use + * @ref NETIO_PKT_BAD() instead of explicitly checking status with this + * function. + * + * @param[in] pkt Packet on which to operate. + * @return The packet's status. + */ +static __inline netio_pkt_status_t +NETIO_PKT_STATUS(netio_pkt_t* pkt) +{ + netio_assert(!pkt->__packet.bits.__minimal); + + return (netio_pkt_status_t) __NETIO_PKT_NOTIF_HEADER(pkt).bits.__status; +} + + +/** Report whether a packet is bad (i.e., was shorter than expected based on + * its headers, or had a bad CRC). + * @ingroup ingress + * + * Note that this function does not verify L3 or L4 checksums. + * + * @param[in] pkt Packet on which to operate. + * @return Nonzero if the packet is bad and should be discarded. + */ +static __inline unsigned int +NETIO_PKT_BAD(netio_pkt_t* pkt) +{ + netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); + + return NETIO_PKT_BAD_M(mda, pkt); +} + + +/** Return the length of the packet's custom header. + * A custom header may or may not be present, depending upon the IPP; its + * contents and alignment are also IPP-dependent. Currently, none of the + * standard IPPs supplied by Tilera produce a custom header. If present, + * the custom header precedes the L2 header in the packet buffer. + * @ingroup pktfuncs + * + * @param[in] pkt Packet on which to operate. + * @return The length of the packet's custom header, in bytes. + */ +static __inline netio_size_t +NETIO_PKT_CUSTOM_HEADER_LENGTH(netio_pkt_t* pkt) +{ + netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); + + return NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda, pkt); +} + + +/** Return the length of the packet, starting with the custom header. + * A custom header may or may not be present, depending upon the IPP; its + * contents and alignment are also IPP-dependent. Currently, none of the + * standard IPPs supplied by Tilera produce a custom header. If present, + * the custom header precedes the L2 header in the packet buffer. + * @ingroup pktfuncs + * + * @param[in] pkt Packet on which to operate. + * @return The length of the packet, in bytes. + */ +static __inline netio_size_t +NETIO_PKT_CUSTOM_LENGTH(netio_pkt_t* pkt) +{ + netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); + + return NETIO_PKT_CUSTOM_LENGTH_M(mda, pkt); +} + + +/** Return a pointer to the packet's custom header. + * A custom header may or may not be present, depending upon the IPP; its + * contents and alignment are also IPP-dependent. Currently, none of the + * standard IPPs supplied by Tilera produce a custom header. If present, + * the custom header precedes the L2 header in the packet buffer. + * @ingroup pktfuncs + * + * @param[in] pkt Packet on which to operate. + * @return A pointer to start of the packet. + */ +static __inline unsigned char* +NETIO_PKT_CUSTOM_DATA(netio_pkt_t* pkt) +{ + netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); + + return NETIO_PKT_CUSTOM_DATA_M(mda, pkt); +} + + +/** Return the length of the packet's L2 (Ethernet plus VLAN or SNAP) header. + * @ingroup pktfuncs + * + * @param[in] pkt Packet on which to operate. + * @return The length of the packet's L2 header, in bytes. + */ +static __inline netio_size_t +NETIO_PKT_L2_HEADER_LENGTH(netio_pkt_t* pkt) +{ + if (NETIO_PKT_IS_MINIMAL(pkt)) + { + netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt); + + return NETIO_PKT_L2_HEADER_LENGTH_MM(mmd, pkt); + } + else + { + netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); + + return NETIO_PKT_L2_HEADER_LENGTH_M(mda, pkt); + } +} + + +/** Return the length of the packet, starting with the L2 (Ethernet) header. + * @ingroup pktfuncs + * + * @param[in] pkt Packet on which to operate. + * @return The length of the packet, in bytes. + */ +static __inline netio_size_t +NETIO_PKT_L2_LENGTH(netio_pkt_t* pkt) +{ + if (NETIO_PKT_IS_MINIMAL(pkt)) + { + netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt); + + return NETIO_PKT_L2_LENGTH_MM(mmd, pkt); + } + else + { + netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); + + return NETIO_PKT_L2_LENGTH_M(mda, pkt); + } +} + + +/** Return a pointer to the packet's L2 (Ethernet) header. + * @ingroup pktfuncs + * + * @param[in] pkt Packet on which to operate. + * @return A pointer to start of the packet. + */ +static __inline unsigned char* +NETIO_PKT_L2_DATA(netio_pkt_t* pkt) +{ + if (NETIO_PKT_IS_MINIMAL(pkt)) + { + netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt); + + return NETIO_PKT_L2_DATA_MM(mmd, pkt); + } + else + { + netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); + + return NETIO_PKT_L2_DATA_M(mda, pkt); + } +} + + +/** Retrieve the length of the packet, starting with the L3 (generally, the IP) + * header. + * @ingroup pktfuncs + * + * @param[in] pkt Packet on which to operate. + * @return Length of the packet's L3 header and data, in bytes. + */ +static __inline netio_size_t +NETIO_PKT_L3_LENGTH(netio_pkt_t* pkt) +{ + if (NETIO_PKT_IS_MINIMAL(pkt)) + { + netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt); + + return NETIO_PKT_L3_LENGTH_MM(mmd, pkt); + } + else + { + netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); + + return NETIO_PKT_L3_LENGTH_M(mda, pkt); + } +} + + +/** Return a pointer to the packet's L3 (generally, the IP) header. + * @ingroup pktfuncs + * + * Note that we guarantee word alignment of the L3 header. + * + * @param[in] pkt Packet on which to operate. + * @return A pointer to the packet's L3 header. + */ +static __inline unsigned char* +NETIO_PKT_L3_DATA(netio_pkt_t* pkt) +{ + if (NETIO_PKT_IS_MINIMAL(pkt)) + { + netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt); + + return NETIO_PKT_L3_DATA_MM(mmd, pkt); + } + else + { + netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); + + return NETIO_PKT_L3_DATA_M(mda, pkt); + } +} + + +/** Return the ordinal of the packet. + * @ingroup ingress + * + * Each packet is given an ordinal number when it is delivered by the IPP. + * In the medium term, the ordinal is unique and monotonically increasing, + * being incremented by 1 for each packet; the ordinal of the first packet + * delivered after the IPP starts is zero. (Since the ordinal is of finite + * size, given enough input packets, it will eventually wrap around to zero; + * in the long term, therefore, ordinals are not unique.) The ordinals + * handed out by different IPPs are not disjoint, so two packets from + * different IPPs may have identical ordinals. Packets dropped by the + * IPP or by the I/O shim are not assigned ordinals. + * + * + * @param[in] pkt Packet on which to operate. + * @return The packet's per-IPP packet ordinal. + */ +static __inline unsigned int +NETIO_PKT_ORDINAL(netio_pkt_t* pkt) +{ + netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); + + return NETIO_PKT_ORDINAL_M(mda, pkt); +} + + +/** Return the per-group ordinal of the packet. + * @ingroup ingress + * + * Each packet is given a per-group ordinal number when it is + * delivered by the IPP. By default, the group is the packet's VLAN, + * although IPP can be recompiled to use different values. In + * the medium term, the ordinal is unique and monotonically + * increasing, being incremented by 1 for each packet; the ordinal of + * the first packet distributed to a particular group is zero. + * (Since the ordinal is of finite size, given enough input packets, + * it will eventually wrap around to zero; in the long term, + * therefore, ordinals are not unique.) The ordinals handed out by + * different IPPs are not disjoint, so two packets from different IPPs + * may have identical ordinals; similarly, packets distributed to + * different groups may have identical ordinals. Packets dropped by + * the IPP or by the I/O shim are not assigned ordinals. + * + * @param[in] pkt Packet on which to operate. + * @return The packet's per-IPP, per-group ordinal. + */ +static __inline unsigned int +NETIO_PKT_GROUP_ORDINAL(netio_pkt_t* pkt) +{ + netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); + + return NETIO_PKT_GROUP_ORDINAL_M(mda, pkt); +} + + +/** Return the VLAN ID assigned to the packet. + * @ingroup ingress + * + * This is usually also contained within the packet header. If the packet + * does not have a VLAN tag, the VLAN ID returned by this function is zero. + * + * @param[in] pkt Packet on which to operate. + * @return The packet's VLAN ID. + */ +static __inline unsigned short +NETIO_PKT_VLAN_ID(netio_pkt_t* pkt) +{ + netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); + + return NETIO_PKT_VLAN_ID_M(mda, pkt); +} + + +/** Return the ethertype of the packet. + * @ingroup ingress + * + * This value is reliable if @ref NETIO_PKT_ETHERTYPE_RECOGNIZED() + * returns true, and otherwise, may not be well defined. + * + * @param[in] pkt Packet on which to operate. + * @return The packet's ethertype. + */ +static __inline unsigned short +NETIO_PKT_ETHERTYPE(netio_pkt_t* pkt) +{ + netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); + + return NETIO_PKT_ETHERTYPE_M(mda, pkt); +} + + +/** Return the flow hash computed on the packet. + * @ingroup ingress + * + * For TCP and UDP packets, this hash is calculated by hashing together + * the "5-tuple" values, specifically the source IP address, destination + * IP address, protocol type, source port and destination port. + * The hash value is intended to be helpful for millions of distinct + * flows. + * + * For IPv4 or IPv6 packets which are neither TCP nor UDP, the flow hash is + * derived by hashing together the source and destination IP addresses. + * + * For MPLS-encapsulated packets, the flow hash is derived by hashing + * the first MPLS label. + * + * For all other packets the flow hash is computed from the source + * and destination Ethernet addresses. + * + * The hash is symmetric, meaning it produces the same value if the + * source and destination are swapped. The only exceptions are + * tunneling protocols 0x04 (IP in IP Encapsulation), 0x29 (Simple + * Internet Protocol), 0x2F (General Routing Encapsulation) and 0x32 + * (Encap Security Payload), which use only the destination address + * since the source address is not meaningful. + * + * @param[in] pkt Packet on which to operate. + * @return The packet's 32-bit flow hash. + */ +static __inline unsigned int +NETIO_PKT_FLOW_HASH(netio_pkt_t* pkt) +{ + netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); + + return NETIO_PKT_FLOW_HASH_M(mda, pkt); +} + + +/** Return the first word of "user data" for the packet. + * + * The contents of the user data words depend on the IPP. + * + * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the first + * word of user data contains the least significant bits of the 64-bit + * arrival cycle count (see @c get_cycle_count_low()). + * + * See the <em>System Programmer's Guide</em> for details. + * + * @ingroup ingress + * + * @param[in] pkt Packet on which to operate. + * @return The packet's first word of "user data". + */ +static __inline unsigned int +NETIO_PKT_USER_DATA_0(netio_pkt_t* pkt) +{ + netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); + + return NETIO_PKT_USER_DATA_0_M(mda, pkt); +} + + +/** Return the second word of "user data" for the packet. + * + * The contents of the user data words depend on the IPP. + * + * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the second + * word of user data contains the most significant bits of the 64-bit + * arrival cycle count (see @c get_cycle_count_high()). + * + * See the <em>System Programmer's Guide</em> for details. + * + * @ingroup ingress + * + * @param[in] pkt Packet on which to operate. + * @return The packet's second word of "user data". + */ +static __inline unsigned int +NETIO_PKT_USER_DATA_1(netio_pkt_t* pkt) +{ + netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); + + return NETIO_PKT_USER_DATA_1_M(mda, pkt); +} + + +/** Determine whether the L4 (TCP/UDP) checksum was calculated. + * @ingroup ingress + * + * @param[in] pkt Packet on which to operate. + * @return Nonzero if the L4 checksum was calculated. + */ +static __inline unsigned int +NETIO_PKT_L4_CSUM_CALCULATED(netio_pkt_t* pkt) +{ + netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); + + return NETIO_PKT_L4_CSUM_CALCULATED_M(mda, pkt); +} + + +/** Determine whether the L4 (TCP/UDP) checksum was calculated and found to + * be correct. + * @ingroup ingress + * + * @param[in] pkt Packet on which to operate. + * @return Nonzero if the checksum was calculated and is correct. + */ +static __inline unsigned int +NETIO_PKT_L4_CSUM_CORRECT(netio_pkt_t* pkt) +{ + netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); + + return NETIO_PKT_L4_CSUM_CORRECT_M(mda, pkt); +} + + +/** Determine whether the L3 (IP) checksum was calculated. + * @ingroup ingress + * + * @param[in] pkt Packet on which to operate. + * @return Nonzero if the L3 (IP) checksum was calculated. +*/ +static __inline unsigned int +NETIO_PKT_L3_CSUM_CALCULATED(netio_pkt_t* pkt) +{ + netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); + + return NETIO_PKT_L3_CSUM_CALCULATED_M(mda, pkt); +} + + +/** Determine whether the L3 (IP) checksum was calculated and found to be + * correct. + * @ingroup ingress + * + * @param[in] pkt Packet on which to operate. + * @return Nonzero if the checksum was calculated and is correct. + */ +static __inline unsigned int +NETIO_PKT_L3_CSUM_CORRECT(netio_pkt_t* pkt) +{ + netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); + + return NETIO_PKT_L3_CSUM_CORRECT_M(mda, pkt); +} + + +/** Determine whether the Ethertype was recognized and L3 packet data was + * processed. + * @ingroup ingress + * + * @param[in] pkt Packet on which to operate. + * @return Nonzero if the Ethertype was recognized and L3 packet data was + * processed. + */ +static __inline unsigned int +NETIO_PKT_ETHERTYPE_RECOGNIZED(netio_pkt_t* pkt) +{ + netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); + + return NETIO_PKT_ETHERTYPE_RECOGNIZED_M(mda, pkt); +} + + +/** Set an egress packet's L2 length, using a metadata pointer to speed the + * computation. + * @ingroup egress + * + * @param[in,out] mmd Pointer to packet's minimal metadata. + * @param[in] pkt Packet on which to operate. + * @param[in] len Packet L2 length, in bytes. + */ +static __inline void +NETIO_PKT_SET_L2_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt, + int len) +{ + mmd->l2_length = len; +} + + +/** Set an egress packet's L2 length. + * @ingroup egress + * + * @param[in,out] pkt Packet on which to operate. + * @param[in] len Packet L2 length, in bytes. + */ +static __inline void +NETIO_PKT_SET_L2_LENGTH(netio_pkt_t* pkt, int len) +{ + netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt); + + NETIO_PKT_SET_L2_LENGTH_MM(mmd, pkt, len); +} + + +/** Set an egress packet's L2 header length, using a metadata pointer to + * speed the computation. + * @ingroup egress + * + * It is not normally necessary to call this routine; only the L2 length, + * not the header length, is needed to transmit a packet. It may be useful if + * the egress packet will later be processed by code which expects to use + * functions like @ref NETIO_PKT_L3_DATA() to get a pointer to the L3 payload. + * + * @param[in,out] mmd Pointer to packet's minimal metadata. + * @param[in] pkt Packet on which to operate. + * @param[in] len Packet L2 header length, in bytes. + */ +static __inline void +NETIO_PKT_SET_L2_HEADER_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, + netio_pkt_t* pkt, int len) +{ + mmd->l3_offset = mmd->l2_offset + len; +} + + +/** Set an egress packet's L2 header length. + * @ingroup egress + * + * It is not normally necessary to call this routine; only the L2 length, + * not the header length, is needed to transmit a packet. It may be useful if + * the egress packet will later be processed by code which expects to use + * functions like @ref NETIO_PKT_L3_DATA() to get a pointer to the L3 payload. + * + * @param[in,out] pkt Packet on which to operate. + * @param[in] len Packet L2 header length, in bytes. + */ +static __inline void +NETIO_PKT_SET_L2_HEADER_LENGTH(netio_pkt_t* pkt, int len) +{ + netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt); + + NETIO_PKT_SET_L2_HEADER_LENGTH_MM(mmd, pkt, len); +} + + +/** Set up an egress packet for hardware checksum computation, using a + * metadata pointer to speed the operation. + * @ingroup egress + * + * NetIO provides the ability to automatically calculate a standard + * 16-bit Internet checksum on transmitted packets. The application + * may specify the point in the packet where the checksum starts, the + * number of bytes to be checksummed, and the two bytes in the packet + * which will be replaced with the completed checksum. (If the range + * of bytes to be checksummed includes the bytes to be replaced, the + * initial values of those bytes will be included in the checksum.) + * + * For some protocols, the packet checksum covers data which is not present + * in the packet, or is at least not contiguous to the main data payload. + * For instance, the TCP checksum includes a "pseudo-header" which includes + * the source and destination IP addresses of the packet. To accommodate + * this, the checksum engine may be "seeded" with an initial value, which + * the application would need to compute based on the specific protocol's + * requirements. Note that the seed is given in host byte order (little- + * endian), not network byte order (big-endian); code written to compute a + * pseudo-header checksum in network byte order will need to byte-swap it + * before use as the seed. + * + * Note that the checksum is computed as part of the transmission process, + * so it will not be present in the packet upon completion of this routine. + * + * @param[in,out] mmd Pointer to packet's minimal metadata. + * @param[in] pkt Packet on which to operate. + * @param[in] start Offset within L2 packet of the first byte to include in + * the checksum. + * @param[in] length Number of bytes to include in the checksum. + * the checksum. + * @param[in] location Offset within L2 packet of the first of the two bytes + * to be replaced with the calculated checksum. + * @param[in] seed Initial value of the running checksum before any of the + * packet data is added. + */ +static __inline void +NETIO_PKT_DO_EGRESS_CSUM_MM(netio_pkt_minimal_metadata_t* mmd, + netio_pkt_t* pkt, int start, int length, + int location, uint16_t seed) +{ + mmd->csum_start = start; + mmd->csum_length = length; + mmd->csum_location = location; + mmd->csum_seed = seed; + mmd->flags |= _NETIO_PKT_NEED_EDMA_CSUM_MASK; +} + + +/** Set up an egress packet for hardware checksum computation. + * @ingroup egress + * + * NetIO provides the ability to automatically calculate a standard + * 16-bit Internet checksum on transmitted packets. The application + * may specify the point in the packet where the checksum starts, the + * number of bytes to be checksummed, and the two bytes in the packet + * which will be replaced with the completed checksum. (If the range + * of bytes to be checksummed includes the bytes to be replaced, the + * initial values of those bytes will be included in the checksum.) + * + * For some protocols, the packet checksum covers data which is not present + * in the packet, or is at least not contiguous to the main data payload. + * For instance, the TCP checksum includes a "pseudo-header" which includes + * the source and destination IP addresses of the packet. To accommodate + * this, the checksum engine may be "seeded" with an initial value, which + * the application would need to compute based on the specific protocol's + * requirements. Note that the seed is given in host byte order (little- + * endian), not network byte order (big-endian); code written to compute a + * pseudo-header checksum in network byte order will need to byte-swap it + * before use as the seed. + * + * Note that the checksum is computed as part of the transmission process, + * so it will not be present in the packet upon completion of this routine. + * + * @param[in,out] pkt Packet on which to operate. + * @param[in] start Offset within L2 packet of the first byte to include in + * the checksum. + * @param[in] length Number of bytes to include in the checksum. + * the checksum. + * @param[in] location Offset within L2 packet of the first of the two bytes + * to be replaced with the calculated checksum. + * @param[in] seed Initial value of the running checksum before any of the + * packet data is added. + */ +static __inline void +NETIO_PKT_DO_EGRESS_CSUM(netio_pkt_t* pkt, int start, int length, + int location, uint16_t seed) +{ + netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt); + + NETIO_PKT_DO_EGRESS_CSUM_MM(mmd, pkt, start, length, location, seed); +} + + +/** Return the number of bytes which could be prepended to a packet, using a + * metadata pointer to speed the operation. + * See @ref netio_populate_prepend_buffer() to get a full description of + * prepending. + * + * @param[in,out] mda Pointer to packet's standard metadata. + * @param[in] pkt Packet on which to operate. + */ +static __inline int +NETIO_PKT_PREPEND_AVAIL_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ + return (pkt->__packet.bits.__offset << 6) + + NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda, pkt); +} + + +/** Return the number of bytes which could be prepended to a packet, using a + * metadata pointer to speed the operation. + * See @ref netio_populate_prepend_buffer() to get a full description of + * prepending. + * @ingroup egress + * + * @param[in,out] mmd Pointer to packet's minimal metadata. + * @param[in] pkt Packet on which to operate. + */ +static __inline int +NETIO_PKT_PREPEND_AVAIL_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt) +{ + return (pkt->__packet.bits.__offset << 6) + mmd->l2_offset; +} + + +/** Return the number of bytes which could be prepended to a packet. + * See @ref netio_populate_prepend_buffer() to get a full description of + * prepending. + * @ingroup egress + * + * @param[in] pkt Packet on which to operate. + */ +static __inline int +NETIO_PKT_PREPEND_AVAIL(netio_pkt_t* pkt) +{ + if (NETIO_PKT_IS_MINIMAL(pkt)) + { + netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt); + + return NETIO_PKT_PREPEND_AVAIL_MM(mmd, pkt); + } + else + { + netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt); + + return NETIO_PKT_PREPEND_AVAIL_M(mda, pkt); + } +} + + +/** Flush a packet's minimal metadata from the cache, using a metadata pointer + * to speed the operation. + * @ingroup egress + * + * @param[in] mmd Pointer to packet's minimal metadata. + * @param[in] pkt Packet on which to operate. + */ +static __inline void +NETIO_PKT_FLUSH_MINIMAL_METADATA_MM(netio_pkt_minimal_metadata_t* mmd, + netio_pkt_t* pkt) +{ +} + + +/** Invalidate a packet's minimal metadata from the cache, using a metadata + * pointer to speed the operation. + * @ingroup egress + * + * @param[in] mmd Pointer to packet's minimal metadata. + * @param[in] pkt Packet on which to operate. + */ +static __inline void +NETIO_PKT_INV_MINIMAL_METADATA_MM(netio_pkt_minimal_metadata_t* mmd, + netio_pkt_t* pkt) +{ +} + + +/** Flush and then invalidate a packet's minimal metadata from the cache, + * using a metadata pointer to speed the operation. + * @ingroup egress + * + * @param[in] mmd Pointer to packet's minimal metadata. + * @param[in] pkt Packet on which to operate. + */ +static __inline void +NETIO_PKT_FLUSH_INV_MINIMAL_METADATA_MM(netio_pkt_minimal_metadata_t* mmd, + netio_pkt_t* pkt) +{ +} + + +/** Flush a packet's metadata from the cache, using a metadata pointer + * to speed the operation. + * @ingroup ingress + * + * @param[in] mda Pointer to packet's minimal metadata. + * @param[in] pkt Packet on which to operate. + */ +static __inline void +NETIO_PKT_FLUSH_METADATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ +} + + +/** Invalidate a packet's metadata from the cache, using a metadata + * pointer to speed the operation. + * @ingroup ingress + * + * @param[in] mda Pointer to packet's metadata. + * @param[in] pkt Packet on which to operate. + */ +static __inline void +NETIO_PKT_INV_METADATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ +} + + +/** Flush and then invalidate a packet's metadata from the cache, + * using a metadata pointer to speed the operation. + * @ingroup ingress + * + * @param[in] mda Pointer to packet's metadata. + * @param[in] pkt Packet on which to operate. + */ +static __inline void +NETIO_PKT_FLUSH_INV_METADATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt) +{ +} + + +/** Flush a packet's minimal metadata from the cache. + * @ingroup egress + * + * @param[in] pkt Packet on which to operate. + */ +static __inline void +NETIO_PKT_FLUSH_MINIMAL_METADATA(netio_pkt_t* pkt) +{ +} + + +/** Invalidate a packet's minimal metadata from the cache. + * @ingroup egress + * + * @param[in] pkt Packet on which to operate. + */ +static __inline void +NETIO_PKT_INV_MINIMAL_METADATA(netio_pkt_t* pkt) +{ +} + + +/** Flush and then invalidate a packet's minimal metadata from the cache. + * @ingroup egress + * + * @param[in] pkt Packet on which to operate. + */ +static __inline void +NETIO_PKT_FLUSH_INV_MINIMAL_METADATA(netio_pkt_t* pkt) +{ +} + + +/** Flush a packet's metadata from the cache. + * @ingroup ingress + * + * @param[in] pkt Packet on which to operate. + */ +static __inline void +NETIO_PKT_FLUSH_METADATA(netio_pkt_t* pkt) +{ +} + + +/** Invalidate a packet's metadata from the cache. + * @ingroup ingress + * + * @param[in] pkt Packet on which to operate. + */ +static __inline void +NETIO_PKT_INV_METADATA(netio_pkt_t* pkt) +{ +} + + +/** Flush and then invalidate a packet's metadata from the cache. + * @ingroup ingress + * + * @param[in] pkt Packet on which to operate. + */ +static __inline void +NETIO_PKT_FLUSH_INV_METADATA(netio_pkt_t* pkt) +{ +} + +/** Number of NUMA nodes we can distribute buffers to. + * @ingroup setup */ +#define NETIO_NUM_NODE_WEIGHTS 16 + +/** + * @brief An object for specifying the characteristics of NetIO communication + * endpoint. + * + * @ingroup setup + * + * The @ref netio_input_register() function uses this structure to define + * how an application tile will communicate with an IPP. + * + * + * Future updates to NetIO may add new members to this structure, + * which can affect the success of the registration operation. Thus, + * if dynamically initializing the structure, applications are urged to + * zero it out first, for example: + * + * @code + * netio_input_config_t config; + * memset(&config, 0, sizeof (config)); + * config.flags = NETIO_RECV | NETIO_XMIT_CSUM | NETIO_TAG_NONE; + * config.num_receive_packets = NETIO_MAX_RECEIVE_PKTS; + * config.queue_id = 0; + * . + * . + * . + * @endcode + * + * since that guarantees that any unused structure members, including + * members which did not exist when the application was first developed, + * will not have unexpected values. + * + * If statically initializing the structure, we strongly recommend use of + * C99-style named initializers, for example: + * + * @code + * netio_input_config_t config = { + * .flags = NETIO_RECV | NETIO_XMIT_CSUM | NETIO_TAG_NONE, + * .num_receive_packets = NETIO_MAX_RECEIVE_PKTS, + * .queue_id = 0, + * }, + * @endcode + * + * instead of the old-style structure initialization: + * + * @code + * // Bad example! Currently equivalent to the above, but don't do this. + * netio_input_config_t config = { + * NETIO_RECV | NETIO_XMIT_CSUM | NETIO_TAG_NONE, NETIO_MAX_RECEIVE_PKTS, 0 + * }, + * @endcode + * + * since the C99 style requires no changes to the code if elements of the + * config structure are rearranged. (It also makes the initialization much + * easier to understand.) + * + * Except for items which address a particular tile's transmit or receive + * characteristics, such as the ::NETIO_RECV flag, applications are advised + * to specify the same set of configuration data on all registrations. + * This prevents differing results if multiple tiles happen to do their + * registration operations in a different order on different invocations of + * the application. This is particularly important for things like link + * management flags, and buffer size and homing specifications. + * + * Unless the ::NETIO_FIXED_BUFFER_VA flag is specified in flags, the NetIO + * buffer pool is automatically created and mapped into the application's + * virtual address space at an address chosen by the operating system, + * using the common memory (cmem) facility in the Tilera Multicore + * Components library. The cmem facility allows multiple processes to gain + * access to shared memory which is mapped into each process at an + * identical virtual address. In order for this to work, the processes + * must have a common ancestor, which must create the common memory using + * tmc_cmem_init(). + * + * In programs using the iLib process creation API, or in programs which use + * only one process (which include programs using the pthreads library), + * tmc_cmem_init() is called automatically. All other applications + * must call it explicitly, before any child processes which might call + * netio_input_register() are created. + */ +typedef struct +{ + /** Registration characteristics. + + This value determines several characteristics of the registration; + flags for different types of behavior are ORed together to make the + final flag value. Generally applications should specify exactly + one flag from each of the following categories: + + - Whether the application will be receiving packets on this queue + (::NETIO_RECV or ::NETIO_NO_RECV). + + - Whether the application will be transmitting packets on this queue, + and if so, whether it will request egress checksum calculation + (::NETIO_XMIT, ::NETIO_XMIT_CSUM, or ::NETIO_NO_XMIT). It is + legal to call netio_get_buffer() without one of the XMIT flags, + as long as ::NETIO_RECV is specified; in this case, the retrieved + buffers must be passed to another tile for transmission. + + - Whether the application expects any vendor-specific tags in + its packets' L2 headers (::NETIO_TAG_NONE, ::NETIO_TAG_BRCM, + or ::NETIO_TAG_MRVL). This must match the configuration of the + target IPP. + + To accommodate applications written to previous versions of the NetIO + interface, none of the flags above are currently required; if omitted, + NetIO behaves more or less as if ::NETIO_RECV | ::NETIO_XMIT_CSUM | + ::NETIO_TAG_NONE were used. However, explicit specification of + the relevant flags allows NetIO to do a better job of resource + allocation, allows earlier detection of certain configuration errors, + and may enable advanced features or higher performance in the future, + so their use is strongly recommended. + + Note that specifying ::NETIO_NO_RECV along with ::NETIO_NO_XMIT + is a special case, intended primarily for use by programs which + retrieve network statistics or do link management operations. + When these flags are both specified, the resulting queue may not + be used with NetIO routines other than netio_get(), netio_set(), + and netio_input_unregister(). See @ref link for more information + on link management. + + Other flags are optional; their use is described below. + */ + int flags; + + /** Interface name. This is a string which identifies the specific + Ethernet controller hardware to be used. The format of the string + is a device type and a device index, separated by a slash; so, + the first 10 Gigabit Ethernet controller is named "xgbe/0", while + the second 10/100/1000 Megabit Ethernet controller is named "gbe/1". + */ + const char* interface; + + /** Receive packet queue size. This specifies the maximum number + of ingress packets that can be received on this queue without + being retrieved by @ref netio_get_packet(). If the IPP's distribution + algorithm calls for a packet to be sent to this queue, and this + number of packets are already pending there, the new packet + will either be discarded, or sent to another tile registered + for the same queue_id (see @ref drops). This value must + be at least ::NETIO_MIN_RECEIVE_PKTS, can always be at least + ::NETIO_MAX_RECEIVE_PKTS, and may be larger than that on certain + interfaces. + */ + int num_receive_packets; + + /** The queue ID being requested. Legal values for this range from 0 + to ::NETIO_MAX_QUEUE_ID, inclusive. ::NETIO_MAX_QUEUE_ID is always + greater than or equal to the number of tiles; this allows one queue + for each tile, plus at least one additional queue. Some applications + may wish to use the additional queue as a destination for unwanted + packets, since packets delivered to queues for which no tiles have + registered are discarded. + */ + unsigned int queue_id; + + /** Maximum number of small send buffers to be held in the local empty + buffer cache. This specifies the size of the area which holds + empty small egress buffers requested from the IPP but not yet + retrieved via @ref netio_get_buffer(). This value must be greater + than zero if the application will ever use @ref netio_get_buffer() + to allocate empty small egress buffers; it may be no larger than + ::NETIO_MAX_SEND_BUFFERS. See @ref epp for more details on empty + buffer caching. + */ + int num_send_buffers_small_total; + + /** Number of small send buffers to be preallocated at registration. + If this value is nonzero, the specified number of empty small egress + buffers will be requested from the IPP during the netio_input_register + operation; this may speed the execution of @ref netio_get_buffer(). + This may be no larger than @ref num_send_buffers_small_total. See @ref + epp for more details on empty buffer caching. + */ + int num_send_buffers_small_prealloc; + + /** Maximum number of large send buffers to be held in the local empty + buffer cache. This specifies the size of the area which holds empty + large egress buffers requested from the IPP but not yet retrieved via + @ref netio_get_buffer(). This value must be greater than zero if the + application will ever use @ref netio_get_buffer() to allocate empty + large egress buffers; it may be no larger than ::NETIO_MAX_SEND_BUFFERS. + See @ref epp for more details on empty buffer caching. + */ + int num_send_buffers_large_total; + + /** Number of large send buffers to be preallocated at registration. + If this value is nonzero, the specified number of empty large egress + buffers will be requested from the IPP during the netio_input_register + operation; this may speed the execution of @ref netio_get_buffer(). + This may be no larger than @ref num_send_buffers_large_total. See @ref + epp for more details on empty buffer caching. + */ + int num_send_buffers_large_prealloc; + + /** Maximum number of jumbo send buffers to be held in the local empty + buffer cache. This specifies the size of the area which holds empty + jumbo egress buffers requested from the IPP but not yet retrieved via + @ref netio_get_buffer(). This value must be greater than zero if the + application will ever use @ref netio_get_buffer() to allocate empty + jumbo egress buffers; it may be no larger than ::NETIO_MAX_SEND_BUFFERS. + See @ref epp for more details on empty buffer caching. + */ + int num_send_buffers_jumbo_total; + + /** Number of jumbo send buffers to be preallocated at registration. + If this value is nonzero, the specified number of empty jumbo egress + buffers will be requested from the IPP during the netio_input_register + operation; this may speed the execution of @ref netio_get_buffer(). + This may be no larger than @ref num_send_buffers_jumbo_total. See @ref + epp for more details on empty buffer caching. + */ + int num_send_buffers_jumbo_prealloc; + + /** Total packet buffer size. This determines the total size, in bytes, + of the NetIO buffer pool. Note that the maximum number of available + buffers of each size is determined during hypervisor configuration + (see the <em>System Programmer's Guide</em> for details); this just + influences how much host memory is allocated for those buffers. + + The buffer pool is allocated from common memory, which will be + automatically initialized if needed. If your buffer pool is larger + than 240 MB, you might need to explicitly call @c tmc_cmem_init(), + as described in the Application Libraries Reference Manual (UG227). + + Packet buffers are currently allocated in chunks of 16 MB; this + value will be rounded up to the next larger multiple of 16 MB. + If this value is zero, a default of 32 MB will be used; this was + the value used by previous versions of NetIO. Note that taking this + default also affects the placement of buffers on Linux NUMA nodes. + See @ref buffer_node_weights for an explanation of buffer placement. + + In order to successfully allocate packet buffers, Linux must have + available huge pages on the relevant Linux NUMA nodes. See the + <em>System Programmer's Guide</em> for information on configuring + huge page support in Linux. + */ + uint64_t total_buffer_size; + + /** Buffer placement weighting factors. + + This array specifies the relative amount of buffering to place + on each of the available Linux NUMA nodes. This array is + indexed by the NUMA node, and the values in the array are + proportional to the amount of buffer space to allocate on that + node. + + If memory striping is enabled in the Hypervisor, then there is + only one logical NUMA node (node 0). In that case, NetIO will by + default ignore the suggested buffer node weights, and buffers + will be striped across the physical memory controllers. See + UG209 System Programmer's Guide for a description of the + hypervisor option that controls memory striping. + + If memory striping is disabled, then there are up to four NUMA + nodes, corresponding to the four DDRAM controllers in the TILE + processor architecture. See UG100 Tile Processor Architecture + Overview for a diagram showing the location of each of the DDRAM + controllers relative to the tile array. + + For instance, if memory striping is disabled, the following + configuration strucure: + + @code + netio_input_config_t config = { + . + . + . + .total_buffer_size = 4 * 16 * 1024 * 1024; + .buffer_node_weights = { 1, 0, 1, 0 }, + }, + @endcode + + would result in 32 MB of buffers being placed on controller 0, and + 32 MB on controller 2. (Since buffers are allocated in units of + 16 MB, some sets of weights will not be able to be matched exactly.) + + For the weights to be effective, @ref total_buffer_size must be + nonzero. If @ref total_buffer_size is zero, causing the default + 32 MB of buffer space to be used, then any specified weights will + be ignored, and buffers will positioned as they were in previous + versions of NetIO: + + - For xgbe/0 and gbe/0, 16 MB of buffers will be placed on controller 1, + and the other 16 MB will be placed on controller 2. + + - For xgbe/1 and gbe/1, 16 MB of buffers will be placed on controller 2, + and the other 16 MB will be placed on controller 3. + + If @ref total_buffer_size is nonzero, but all weights are zero, + then all buffer space will be allocated on Linux NUMA node zero. + + By default, the specified buffer placement is treated as a hint; + if sufficient free memory is not available on the specified + controllers, the buffers will be allocated elsewhere. However, + if the ::NETIO_STRICT_HOMING flag is specified in @ref flags, then a + failure to allocate buffer space exactly as requested will cause the + registration operation to fail with an error of ::NETIO_CANNOT_HOME. + + Note that maximal network performance cannot be achieved with + only one memory controller. + */ + uint8_t buffer_node_weights[NETIO_NUM_NODE_WEIGHTS]; + + /** Fixed virtual address for packet buffers. Only valid when + ::NETIO_FIXED_BUFFER_VA is specified in @ref flags; see the + description of that flag for details. + */ + void* fixed_buffer_va; + + /** + Maximum number of outstanding send packet requests. This value is + only relevant when an EPP is in use; it determines the number of + slots in the EPP's outgoing packet queue which this tile is allowed + to consume, and thus the number of packets which may be sent before + the sending tile must wait for an acknowledgment from the EPP. + Modifying this value is generally only helpful when using @ref + netio_send_packet_vector(), where it can help improve performance by + allowing a single vector send operation to process more packets. + Typically it is not specified, and the default, which divides the + outgoing packet slots evenly between all tiles on the chip, is used. + + If a registration asks for more outgoing packet queue slots than are + available, ::NETIO_TOOMANY_XMIT will be returned. The total number + of packet queue slots which are available for all tiles for each EPP + is subject to change, but is currently ::NETIO_TOTAL_SENDS_OUTSTANDING. + + + This value is ignored if ::NETIO_XMIT is not specified in flags. + If you want to specify a large value here for a specific tile, you are + advised to specify NETIO_NO_XMIT on other, non-transmitting tiles so + that they do not consume a default number of packet slots. Any tile + transmitting is required to have at least ::NETIO_MIN_SENDS_OUTSTANDING + slots allocated to it; values less than that will be silently + increased by the NetIO library. + */ + int num_sends_outstanding; +} +netio_input_config_t; + + +/** Registration flags; used in the @ref netio_input_config_t structure. + * @addtogroup setup + */ +/** @{ */ + +/** Fail a registration request if we can't put packet buffers + on the specified memory controllers. */ +#define NETIO_STRICT_HOMING 0x00000002 + +/** This application expects no tags on its L2 headers. */ +#define NETIO_TAG_NONE 0x00000004 + +/** This application expects Marvell extended tags on its L2 headers. */ +#define NETIO_TAG_MRVL 0x00000008 + +/** This application expects Broadcom tags on its L2 headers. */ +#define NETIO_TAG_BRCM 0x00000010 + +/** This registration may call routines which receive packets. */ +#define NETIO_RECV 0x00000020 + +/** This registration may not call routines which receive packets. */ +#define NETIO_NO_RECV 0x00000040 + +/** This registration may call routines which transmit packets. */ +#define NETIO_XMIT 0x00000080 + +/** This registration may call routines which transmit packets with + checksum acceleration. */ +#define NETIO_XMIT_CSUM 0x00000100 + +/** This registration may not call routines which transmit packets. */ +#define NETIO_NO_XMIT 0x00000200 + +/** This registration wants NetIO buffers mapped at an application-specified + virtual address. + + NetIO buffers are by default created by the TMC common memory facility, + which must be configured by a common ancestor of all processes sharing + a network interface. When this flag is specified, NetIO buffers are + instead mapped at an address chosen by the application (and specified + in @ref netio_input_config_t::fixed_buffer_va). This allows multiple + unrelated but cooperating processes to share a NetIO interface. + All processes sharing the same interface must specify this flag, + and all must specify the same fixed virtual address. + + @ref netio_input_config_t::fixed_buffer_va must be a + multiple of 16 MB, and the packet buffers will occupy @ref + netio_input_config_t::total_buffer_size bytes of virtual address + space, beginning at that address. If any of those virtual addresses + are currently occupied by other memory objects, like application or + shared library code or data, @ref netio_input_register() will return + ::NETIO_FAULT. While it is impossible to provide a fixed_buffer_va + which will work for all applications, a good first guess might be to + use 0xb0000000 minus @ref netio_input_config_t::total_buffer_size. + If that fails, it might be helpful to consult the running application's + virtual address description file (/proc/<em>pid</em>/maps) to see + which regions of virtual address space are available. + */ +#define NETIO_FIXED_BUFFER_VA 0x00000400 + +/** This registration call will not complete unless the network link + is up. The process will wait several seconds for this to happen (the + precise interval is link-dependent), but if the link does not come up, + ::NETIO_LINK_DOWN will be returned. This flag is the default if + ::NETIO_NOREQUIRE_LINK_UP is not specified. Note that this flag by + itself does not request that the link be brought up; that can be done + with the ::NETIO_AUTO_LINK_UPDN or ::NETIO_AUTO_LINK_UP flags (the + latter is the default if no NETIO_AUTO_LINK_xxx flags are specified), + or by explicitly setting the link's desired state via netio_set(). + If the link is not brought up by one of those methods, and this flag + is specified, the registration operation will return ::NETIO_LINK_DOWN. + This flag is ignored if it is specified along with ::NETIO_NO_XMIT and + ::NETIO_NO_RECV. See @ref link for more information on link + management. + */ +#define NETIO_REQUIRE_LINK_UP 0x00000800 + +/** This registration call will complete even if the network link is not up. + Whenever the link is not up, packets will not be sent or received: + netio_get_packet() will return ::NETIO_NOPKT once all queued packets + have been drained, and netio_send_packet() and similar routines will + return NETIO_QUEUE_FULL once the outgoing packet queue in the EPP + or the I/O shim is full. See @ref link for more information on link + management. + */ +#define NETIO_NOREQUIRE_LINK_UP 0x00001000 + +#ifndef __DOXYGEN__ +/* + * These are part of the implementation of the NETIO_AUTO_LINK_xxx flags, + * but should not be used directly by applications, and are thus not + * documented. + */ +#define _NETIO_AUTO_UP 0x00002000 +#define _NETIO_AUTO_DN 0x00004000 +#define _NETIO_AUTO_PRESENT 0x00008000 +#endif + +/** Set the desired state of the link to up, allowing any speeds which are + supported by the link hardware, as part of this registration operation. + Do not take down the link automatically. This is the default if + no other NETIO_AUTO_LINK_xxx flags are specified. This flag is ignored + if it is specified along with ::NETIO_NO_XMIT and ::NETIO_NO_RECV. + See @ref link for more information on link management. + */ +#define NETIO_AUTO_LINK_UP (_NETIO_AUTO_PRESENT | _NETIO_AUTO_UP) + +/** Set the desired state of the link to up, allowing any speeds which are + supported by the link hardware, as part of this registration operation. + Set the desired state of the link to down the next time no tiles are + registered for packet reception or transmission. This flag is ignored + if it is specified along with ::NETIO_NO_XMIT and ::NETIO_NO_RECV. + See @ref link for more information on link management. + */ +#define NETIO_AUTO_LINK_UPDN (_NETIO_AUTO_PRESENT | _NETIO_AUTO_UP | \ + _NETIO_AUTO_DN) + +/** Set the desired state of the link to down the next time no tiles are + registered for packet reception or transmission. This flag is ignored + if it is specified along with ::NETIO_NO_XMIT and ::NETIO_NO_RECV. + See @ref link for more information on link management. + */ +#define NETIO_AUTO_LINK_DN (_NETIO_AUTO_PRESENT | _NETIO_AUTO_DN) + +/** Do not bring up the link automatically as part of this registration + operation. Do not take down the link automatically. This flag + is ignored if it is specified along with ::NETIO_NO_XMIT and + ::NETIO_NO_RECV. See @ref link for more information on link management. + */ +#define NETIO_AUTO_LINK_NONE _NETIO_AUTO_PRESENT + + +/** Minimum number of receive packets. */ +#define NETIO_MIN_RECEIVE_PKTS 16 + +/** Lower bound on the maximum number of receive packets; may be higher + than this on some interfaces. */ +#define NETIO_MAX_RECEIVE_PKTS 128 + +/** Maximum number of send buffers, per packet size. */ +#define NETIO_MAX_SEND_BUFFERS 16 + +/** Number of EPP queue slots, and thus outstanding sends, per EPP. */ +#define NETIO_TOTAL_SENDS_OUTSTANDING 2015 + +/** Minimum number of EPP queue slots, and thus outstanding sends, per + * transmitting tile. */ +#define NETIO_MIN_SENDS_OUTSTANDING 16 + + +/**@}*/ + +#ifndef __DOXYGEN__ + +/** + * An object for providing Ethernet packets to a process. + */ +struct __netio_queue_impl_t; + +/** + * An object for managing the user end of a NetIO queue. + */ +struct __netio_queue_user_impl_t; + +#endif /* !__DOXYGEN__ */ + + +/** A netio_queue_t describes a NetIO communications endpoint. + * @ingroup setup + */ +typedef struct +{ +#ifdef __DOXYGEN__ + uint8_t opaque[8]; /**< This is an opaque structure. */ +#else + struct __netio_queue_impl_t* __system_part; /**< The system part. */ + struct __netio_queue_user_impl_t* __user_part; /**< The user part. */ +#ifdef _NETIO_PTHREAD + _netio_percpu_mutex_t lock; /**< Queue lock. */ +#endif +#endif +} +netio_queue_t; + + +/** + * @brief Packet send context. + * + * @ingroup egress + * + * Packet send context for use with netio_send_packet_prepare and _commit. + */ +typedef struct +{ +#ifdef __DOXYGEN__ + uint8_t opaque[44]; /**< This is an opaque structure. */ +#else + uint8_t flags; /**< Defined below */ + uint8_t datalen; /**< Number of valid words pointed to by data. */ + uint32_t request[9]; /**< Request to be sent to the EPP or shim. Note + that this is smaller than the 11-word maximum + request size, since some constant values are + not saved in the context. */ + uint32_t *data; /**< Data to be sent to the EPP or shim via IDN. */ +#endif +} +netio_send_pkt_context_t; + + +#ifndef __DOXYGEN__ +#define SEND_PKT_CTX_USE_EPP 1 /**< We're sending to an EPP. */ +#define SEND_PKT_CTX_SEND_CSUM 2 /**< Request includes a checksum. */ +#endif + +/** + * @brief Packet vector entry. + * + * @ingroup egress + * + * This data structure is used with netio_send_packet_vector() to send multiple + * packets with one NetIO call. The structure should be initialized by + * calling netio_pkt_vector_set(), rather than by setting the fields + * directly. + * + * This structure is guaranteed to be a power of two in size, no + * bigger than one L2 cache line, and to be aligned modulo its size. + */ +typedef struct +#ifndef __DOXYGEN__ +__attribute__((aligned(8))) +#endif +{ + /** Reserved for use by the user application. When initialized with + * the netio_set_pkt_vector_entry() function, this field is guaranteed + * to be visible to readers only after all other fields are already + * visible. This way it can be used as a valid flag or generation + * counter. */ + uint8_t user_data; + + /* Structure members below this point should not be accessed directly by + * applications, as they may change in the future. */ + + /** Low 8 bits of the packet address to send. The high bits are + * acquired from the 'handle' field. */ + uint8_t buffer_address_low; + + /** Number of bytes to transmit. */ + uint16_t size; + + /** The raw handle from a netio_pkt_t. If this is NETIO_PKT_HANDLE_NONE, + * this vector entry will be skipped and no packet will be transmitted. */ + netio_pkt_handle_t handle; +} +netio_pkt_vector_entry_t; + + +/** + * @brief Initialize fields in a packet vector entry. + * + * @ingroup egress + * + * @param[out] v Pointer to the vector entry to be initialized. + * @param[in] pkt Packet to be transmitted when the vector entry is passed to + * netio_send_packet_vector(). Note that the packet's attributes + * (e.g., its L2 offset and length) are captured at the time this + * routine is called; subsequent changes in those attributes will not + * be reflected in the packet which is actually transmitted. + * Changes in the packet's contents, however, will be so reflected. + * If this is NULL, no packet will be transmitted. + * @param[in] user_data User data to be set in the vector entry. + * This function guarantees that the "user_data" field will become + * visible to a reader only after all other fields have become visible. + * This allows a structure in a ring buffer to be written and read + * by a polling reader without any locks or other synchronization. + */ +static __inline void +netio_pkt_vector_set(volatile netio_pkt_vector_entry_t* v, netio_pkt_t* pkt, + uint8_t user_data) +{ + if (pkt) + { + if (NETIO_PKT_IS_MINIMAL(pkt)) + { + netio_pkt_minimal_metadata_t* mmd = + (netio_pkt_minimal_metadata_t*) &pkt->__metadata; + v->buffer_address_low = (uintptr_t) NETIO_PKT_L2_DATA_MM(mmd, pkt) & 0xFF; + v->size = NETIO_PKT_L2_LENGTH_MM(mmd, pkt); + } + else + { + netio_pkt_metadata_t* mda = &pkt->__metadata; + v->buffer_address_low = (uintptr_t) NETIO_PKT_L2_DATA_M(mda, pkt) & 0xFF; + v->size = NETIO_PKT_L2_LENGTH_M(mda, pkt); + } + v->handle.word = pkt->__packet.word; + } + else + { + v->handle.word = 0; /* Set handle to NETIO_PKT_HANDLE_NONE. */ + } + + __asm__("" : : : "memory"); + + v->user_data = user_data; +} + + +/** + * Flags and structures for @ref netio_get() and @ref netio_set(). + * @ingroup config + */ + +/** @{ */ +/** Parameter class; addr is a NETIO_PARAM_xxx value. */ +#define NETIO_PARAM 0 +/** Interface MAC address. This address is only valid with @ref netio_get(). + * The value is a 6-byte MAC address. Depending upon the overall system + * design, a MAC address may or may not be available for each interface. */ +#define NETIO_PARAM_MAC 0 + +/** Determine whether to suspend output on the receipt of pause frames. + * If the value is nonzero, the I/O shim will suspend output when a pause + * frame is received. If the value is zero, pause frames will be ignored. */ +#define NETIO_PARAM_PAUSE_IN 1 + +/** Determine whether to send pause frames if the I/O shim packet FIFOs are + * nearly full. If the value is zero, pause frames are not sent. If + * the value is nonzero, it is the delay value which will be sent in any + * pause frames which are output, in units of 512 bit times. */ +#define NETIO_PARAM_PAUSE_OUT 2 + +/** Jumbo frame support. The value is a 4-byte integer. If the value is + * nonzero, the MAC will accept frames of up to 10240 bytes. If the value + * is zero, the MAC will only accept frames of up to 1544 bytes. */ +#define NETIO_PARAM_JUMBO 3 + +/** I/O shim's overflow statistics register. The value is two 16-bit integers. + * The first 16-bit value (or the low 16 bits, if the value is treated as a + * 32-bit number) is the count of packets which were completely dropped and + * not delivered by the shim. The second 16-bit value (or the high 16 bits, + * if the value is treated as a 32-bit number) is the count of packets + * which were truncated and thus only partially delivered by the shim. This + * register is automatically reset to zero after it has been read. + */ +#define NETIO_PARAM_OVERFLOW 4 + +/** IPP statistics. This address is only valid with @ref netio_get(). The + * value is a netio_stat_t structure. Unlike the I/O shim statistics, the + * IPP statistics are not all reset to zero on read; see the description + * of the netio_stat_t for details. */ +#define NETIO_PARAM_STAT 5 + +/** Possible link state. The value is a combination of "NETIO_LINK_xxx" + * flags. With @ref netio_get(), this will indicate which flags are + * actually supported by the hardware. + * + * For historical reasons, specifying this value to netio_set() will have + * the same behavior as using ::NETIO_PARAM_LINK_CONFIG, but this usage is + * discouraged. + */ +#define NETIO_PARAM_LINK_POSSIBLE_STATE 6 + +/** Link configuration. The value is a combination of "NETIO_LINK_xxx" flags. + * With @ref netio_set(), this will attempt to immediately bring up the + * link using whichever of the requested flags are supported by the + * hardware, or take down the link if the flags are zero; if this is + * not possible, an error will be returned. Many programs will want + * to use ::NETIO_PARAM_LINK_DESIRED_STATE instead. + * + * For historical reasons, specifying this value to netio_get() will + * have the same behavior as using ::NETIO_PARAM_LINK_POSSIBLE_STATE, + * but this usage is discouraged. + */ +#define NETIO_PARAM_LINK_CONFIG NETIO_PARAM_LINK_POSSIBLE_STATE + +/** Current link state. This address is only valid with @ref netio_get(). + * The value is zero or more of the "NETIO_LINK_xxx" flags, ORed together. + * If the link is down, the value ANDed with NETIO_LINK_SPEED will be + * zero; if the link is up, the value ANDed with NETIO_LINK_SPEED will + * result in exactly one of the NETIO_LINK_xxx values, indicating the + * current speed. */ +#define NETIO_PARAM_LINK_CURRENT_STATE 7 + +/** Variant symbol for current state, retained for compatibility with + * pre-MDE-2.1 programs. */ +#define NETIO_PARAM_LINK_STATUS NETIO_PARAM_LINK_CURRENT_STATE + +/** Packet Coherence protocol. This address is only valid with @ref netio_get(). + * The value is nonzero if the interface is configured for cache-coherent DMA. + */ +#define NETIO_PARAM_COHERENT 8 + +/** Desired link state. The value is a conbination of "NETIO_LINK_xxx" + * flags, which specify the desired state for the link. With @ref + * netio_set(), this will, in the background, attempt to bring up the link + * using whichever of the requested flags are reasonable, or take down the + * link if the flags are zero. The actual link up or down operation may + * happen after this call completes. If the link state changes in the + * future, the system will continue to try to get back to the desired link + * state; for instance, if the link is brought up successfully, and then + * the network cable is disconnected, the link will go down. However, the + * desired state of the link is still up, so if the cable is reconnected, + * the link will be brought up again. + * + * With @ref netio_get(), this will indicate the desired state for the + * link, as set with a previous netio_set() call, or implicitly by a + * netio_input_register() or netio_input_unregister() operation. This may + * not reflect the current state of the link; to get that, use + * ::NETIO_PARAM_LINK_CURRENT_STATE. */ +#define NETIO_PARAM_LINK_DESIRED_STATE 9 + +/** NetIO statistics structure. Retrieved using the ::NETIO_PARAM_STAT + * address passed to @ref netio_get(). */ +typedef struct +{ + /** Number of packets which have been received by the IPP and forwarded + * to a tile's receive queue for processing. This value wraps at its + * maximum, and is not cleared upon read. */ + uint32_t packets_received; + + /** Number of packets which have been dropped by the IPP, because they could + * not be received, or could not be forwarded to a tile. The former happens + * when the IPP does not have a free packet buffer of suitable size for an + * incoming frame. The latter happens when all potential destination tiles + * for a packet, as defined by the group, bucket, and queue configuration, + * have full receive queues. This value wraps at its maximum, and is not + * cleared upon read. */ + uint32_t packets_dropped; + + /* + * Note: the #defines after each of the following four one-byte values + * denote their location within the third word of the netio_stat_t. They + * are intended for use only by the IPP implementation and are thus omitted + * from the Doxygen output. + */ + + /** Number of packets dropped because no worker was able to accept a new + * packet. This value saturates at its maximum, and is cleared upon + * read. */ + uint8_t drops_no_worker; +#ifndef __DOXYGEN__ +#define NETIO_STAT_DROPS_NO_WORKER 0 +#endif + + /** Number of packets dropped because no small buffers were available. + * This value saturates at its maximum, and is cleared upon read. */ + uint8_t drops_no_smallbuf; +#ifndef __DOXYGEN__ +#define NETIO_STAT_DROPS_NO_SMALLBUF 1 +#endif + + /** Number of packets dropped because no large buffers were available. + * This value saturates at its maximum, and is cleared upon read. */ + uint8_t drops_no_largebuf; +#ifndef __DOXYGEN__ +#define NETIO_STAT_DROPS_NO_LARGEBUF 2 +#endif + + /** Number of packets dropped because no jumbo buffers were available. + * This value saturates at its maximum, and is cleared upon read. */ + uint8_t drops_no_jumbobuf; +#ifndef __DOXYGEN__ +#define NETIO_STAT_DROPS_NO_JUMBOBUF 3 +#endif +} +netio_stat_t; + + +/** Link can run, should run, or is running at 10 Mbps. */ +#define NETIO_LINK_10M 0x01 + +/** Link can run, should run, or is running at 100 Mbps. */ +#define NETIO_LINK_100M 0x02 + +/** Link can run, should run, or is running at 1 Gbps. */ +#define NETIO_LINK_1G 0x04 + +/** Link can run, should run, or is running at 10 Gbps. */ +#define NETIO_LINK_10G 0x08 + +/** Link should run at the highest speed supported by the link and by + * the device connected to the link. Only usable as a value for + * the link's desired state; never returned as a value for the current + * or possible states. */ +#define NETIO_LINK_ANYSPEED 0x10 + +/** All legal link speeds. */ +#define NETIO_LINK_SPEED (NETIO_LINK_10M | \ + NETIO_LINK_100M | \ + NETIO_LINK_1G | \ + NETIO_LINK_10G | \ + NETIO_LINK_ANYSPEED) + + +/** MAC register class. Addr is a register offset within the MAC. + * Registers within the XGbE and GbE MACs are documented in the Tile + * Processor I/O Device Guide (UG104). MAC registers start at address + * 0x4000, and do not include the MAC_INTERFACE registers. */ +#define NETIO_MAC 1 + +/** MDIO register class (IEEE 802.3 clause 22 format). Addr is the "addr" + * member of a netio_mdio_addr_t structure. */ +#define NETIO_MDIO 2 + +/** MDIO register class (IEEE 802.3 clause 45 format). Addr is the "addr" + * member of a netio_mdio_addr_t structure. */ +#define NETIO_MDIO_CLAUSE45 3 + +/** NetIO MDIO address type. Retrieved or provided using the ::NETIO_MDIO + * address passed to @ref netio_get() or @ref netio_set(). */ +typedef union +{ + struct + { + unsigned int reg:16; /**< MDIO register offset. For clause 22 access, + must be less than 32. */ + unsigned int phy:5; /**< Which MDIO PHY to access. */ + unsigned int dev:5; /**< Which MDIO device to access within that PHY. + Applicable for clause 45 access only; ignored + for clause 22 access. */ + } + bits; /**< Container for bitfields. */ + uint64_t addr; /**< Value to pass to @ref netio_get() or + * @ref netio_set(). */ +} +netio_mdio_addr_t; + +/** @} */ + +#endif /* __NETIO_INTF_H__ */ diff --git a/arch/tile/kernel/Makefile b/arch/tile/kernel/Makefile index 112b1e248f05..b4c8e8ec45dc 100644 --- a/arch/tile/kernel/Makefile +++ b/arch/tile/kernel/Makefile @@ -15,3 +15,4 @@ obj-$(CONFIG_SMP) += smpboot.o smp.o tlb.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o +obj-$(CONFIG_PCI) += pci.o diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c new file mode 100644 index 000000000000..a1ee25be9ad9 --- /dev/null +++ b/arch/tile/kernel/pci.c @@ -0,0 +1,621 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/capability.h> +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/bootmem.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/uaccess.h> + +#include <asm/processor.h> +#include <asm/sections.h> +#include <asm/byteorder.h> +#include <asm/hv_driver.h> +#include <hv/drv_pcie_rc_intf.h> + + +/* + * Initialization flow and process + * ------------------------------- + * + * This files containes the routines to search for PCI buses, + * enumerate the buses, and configure any attached devices. + * + * There are two entry points here: + * 1) tile_pci_init + * This sets up the pci_controller structs, and opens the + * FDs to the hypervisor. This is called from setup_arch() early + * in the boot process. + * 2) pcibios_init + * This probes the PCI bus(es) for any attached hardware. It's + * called by subsys_initcall. All of the real work is done by the + * generic Linux PCI layer. + * + */ + +/* + * This flag tells if the platform is TILEmpower that needs + * special configuration for the PLX switch chip. + */ +int __write_once tile_plx_gen1; + +static struct pci_controller controllers[TILE_NUM_PCIE]; +static int num_controllers; + +static struct pci_ops tile_cfg_ops; + + +/* + * We don't need to worry about the alignment of resources. + */ +resource_size_t pcibios_align_resource(void *data, const struct resource *res, + resource_size_t size, resource_size_t align) +{ + return res->start; +} +EXPORT_SYMBOL(pcibios_align_resource); + +/* + * Open a FD to the hypervisor PCI device. + * + * controller_id is the controller number, config type is 0 or 1 for + * config0 or config1 operations. + */ +static int __init tile_pcie_open(int controller_id, int config_type) +{ + char filename[32]; + int fd; + + sprintf(filename, "pcie/%d/config%d", controller_id, config_type); + + fd = hv_dev_open((HV_VirtAddr)filename, 0); + + return fd; +} + + +/* + * Get the IRQ numbers from the HV and set up the handlers for them. + */ +static int __init tile_init_irqs(int controller_id, + struct pci_controller *controller) +{ + char filename[32]; + int fd; + int ret; + int x; + struct pcie_rc_config rc_config; + + sprintf(filename, "pcie/%d/ctl", controller_id); + fd = hv_dev_open((HV_VirtAddr)filename, 0); + if (fd < 0) { + pr_err("PCI: hv_dev_open(%s) failed\n", filename); + return -1; + } + ret = hv_dev_pread(fd, 0, (HV_VirtAddr)(&rc_config), + sizeof(rc_config), PCIE_RC_CONFIG_MASK_OFF); + hv_dev_close(fd); + if (ret != sizeof(rc_config)) { + pr_err("PCI: wanted %zd bytes, got %d\n", + sizeof(rc_config), ret); + return -1; + } + /* Record irq_base so that we can map INTx to IRQ # later. */ + controller->irq_base = rc_config.intr; + + for (x = 0; x < 4; x++) + tile_irq_activate(rc_config.intr + x, + TILE_IRQ_HW_CLEAR); + + if (rc_config.plx_gen1) + controller->plx_gen1 = 1; + + return 0; +} + +/* + * First initialization entry point, called from setup_arch(). + * + * Find valid controllers and fill in pci_controller structs for each + * of them. + * + * Returns the number of controllers discovered. + */ +int __init tile_pci_init(void) +{ + int i; + + pr_info("PCI: Searching for controllers...\n"); + + /* Do any configuration we need before using the PCIe */ + + for (i = 0; i < TILE_NUM_PCIE; i++) { + int hv_cfg_fd0 = -1; + int hv_cfg_fd1 = -1; + int hv_mem_fd = -1; + char name[32]; + struct pci_controller *controller; + + /* + * Open the fd to the HV. If it fails then this + * device doesn't exist. + */ + hv_cfg_fd0 = tile_pcie_open(i, 0); + if (hv_cfg_fd0 < 0) + continue; + hv_cfg_fd1 = tile_pcie_open(i, 1); + if (hv_cfg_fd1 < 0) { + pr_err("PCI: Couldn't open config fd to HV " + "for controller %d\n", i); + goto err_cont; + } + + sprintf(name, "pcie/%d/mem", i); + hv_mem_fd = hv_dev_open((HV_VirtAddr)name, 0); + if (hv_mem_fd < 0) { + pr_err("PCI: Could not open mem fd to HV!\n"); + goto err_cont; + } + + pr_info("PCI: Found PCI controller #%d\n", i); + + controller = &controllers[num_controllers]; + + if (tile_init_irqs(i, controller)) { + pr_err("PCI: Could not initialize " + "IRQs, aborting.\n"); + goto err_cont; + } + + controller->index = num_controllers; + controller->hv_cfg_fd[0] = hv_cfg_fd0; + controller->hv_cfg_fd[1] = hv_cfg_fd1; + controller->hv_mem_fd = hv_mem_fd; + controller->first_busno = 0; + controller->last_busno = 0xff; + controller->ops = &tile_cfg_ops; + + num_controllers++; + continue; + +err_cont: + if (hv_cfg_fd0 >= 0) + hv_dev_close(hv_cfg_fd0); + if (hv_cfg_fd1 >= 0) + hv_dev_close(hv_cfg_fd1); + if (hv_mem_fd >= 0) + hv_dev_close(hv_mem_fd); + continue; + } + + /* + * Before using the PCIe, see if we need to do any platform-specific + * configuration, such as the PLX switch Gen 1 issue on TILEmpower. + */ + for (i = 0; i < num_controllers; i++) { + struct pci_controller *controller = &controllers[i]; + + if (controller->plx_gen1) + tile_plx_gen1 = 1; + } + + return num_controllers; +} + +/* + * (pin - 1) converts from the PCI standard's [1:4] convention to + * a normal [0:3] range. + */ +static int tile_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + struct pci_controller *controller = + (struct pci_controller *)dev->sysdata; + return (pin - 1) + controller->irq_base; +} + + +static void __init fixup_read_and_payload_sizes(void) +{ + struct pci_dev *dev = NULL; + int smallest_max_payload = 0x1; /* Tile maxes out at 256 bytes. */ + int max_read_size = 0x2; /* Limit to 512 byte reads. */ + u16 new_values; + + /* Scan for the smallest maximum payload size. */ + while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { + int pcie_caps_offset; + u32 devcap; + int max_payload; + + pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP); + if (pcie_caps_offset == 0) + continue; + + pci_read_config_dword(dev, pcie_caps_offset + PCI_EXP_DEVCAP, + &devcap); + max_payload = devcap & PCI_EXP_DEVCAP_PAYLOAD; + if (max_payload < smallest_max_payload) + smallest_max_payload = max_payload; + } + + /* Now, set the max_payload_size for all devices to that value. */ + new_values = (max_read_size << 12) | (smallest_max_payload << 5); + while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { + int pcie_caps_offset; + u16 devctl; + + pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP); + if (pcie_caps_offset == 0) + continue; + + pci_read_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL, + &devctl); + devctl &= ~(PCI_EXP_DEVCTL_PAYLOAD | PCI_EXP_DEVCTL_READRQ); + devctl |= new_values; + pci_write_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL, + devctl); + } +} + + +/* + * Second PCI initialization entry point, called by subsys_initcall. + * + * The controllers have been set up by the time we get here, by a call to + * tile_pci_init. + */ +static int __init pcibios_init(void) +{ + int i; + + pr_info("PCI: Probing PCI hardware\n"); + + /* + * Delay a bit in case devices aren't ready. Some devices are + * known to require at least 20ms here, but we use a more + * conservative value. + */ + mdelay(250); + + /* Scan all of the recorded PCI controllers. */ + for (i = 0; i < num_controllers; i++) { + struct pci_controller *controller = &controllers[i]; + struct pci_bus *bus; + + pr_info("PCI: initializing controller #%d\n", i); + + /* + * This comes from the generic Linux PCI driver. + * + * It reads the PCI tree for this bus into the Linux + * data structures. + * + * This is inlined in linux/pci.h and calls into + * pci_scan_bus_parented() in probe.c. + */ + bus = pci_scan_bus(0, controller->ops, controller); + controller->root_bus = bus; + controller->last_busno = bus->subordinate; + + } + + /* Do machine dependent PCI interrupt routing */ + pci_fixup_irqs(pci_common_swizzle, tile_map_irq); + + /* + * This comes from the generic Linux PCI driver. + * + * It allocates all of the resources (I/O memory, etc) + * associated with the devices read in above. + */ + + pci_assign_unassigned_resources(); + + /* Configure the max_read_size and max_payload_size values. */ + fixup_read_and_payload_sizes(); + + /* Record the I/O resources in the PCI controller structure. */ + for (i = 0; i < num_controllers; i++) { + struct pci_bus *root_bus = controllers[i].root_bus; + struct pci_bus *next_bus; + struct pci_dev *dev; + + list_for_each_entry(dev, &root_bus->devices, bus_list) { + /* Find the PCI host controller, ie. the 1st bridge. */ + if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && + (PCI_SLOT(dev->devfn) == 0)) { + next_bus = dev->subordinate; + controllers[i].mem_resources[0] = + *next_bus->resource[0]; + controllers[i].mem_resources[1] = + *next_bus->resource[1]; + controllers[i].mem_resources[2] = + *next_bus->resource[2]; + + break; + } + } + + } + + return 0; +} +subsys_initcall(pcibios_init); + +/* + * No bus fixups needed. + */ +void __devinit pcibios_fixup_bus(struct pci_bus *bus) +{ + /* Nothing needs to be done. */ +} + +/* + * This can be called from the generic PCI layer, but doesn't need to + * do anything. + */ +char __devinit *pcibios_setup(char *str) +{ + /* Nothing needs to be done. */ + return str; +} + +/* + * This is called from the generic Linux layer. + */ +void __init pcibios_update_irq(struct pci_dev *dev, int irq) +{ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); +} + +/* + * Enable memory and/or address decoding, as appropriate, for the + * device described by the 'dev' struct. + * + * This is called from the generic PCI layer, and can be called + * for bridges or endpoints. + */ +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + u16 cmd, old_cmd; + u8 header_type; + int i; + struct resource *r; + + pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type); + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + old_cmd = cmd; + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { + /* + * For bridges, we enable both memory and I/O decoding + * in call cases. + */ + cmd |= PCI_COMMAND_IO; + cmd |= PCI_COMMAND_MEMORY; + } else { + /* + * For endpoints, we enable memory and/or I/O decoding + * only if they have a memory resource of that type. + */ + for (i = 0; i < 6; i++) { + r = &dev->resource[i]; + if (r->flags & IORESOURCE_UNSET) { + pr_err("PCI: Device %s not available " + "because of resource collisions\n", + pci_name(dev)); + return -EINVAL; + } + if (r->flags & IORESOURCE_IO) + cmd |= PCI_COMMAND_IO; + if (r->flags & IORESOURCE_MEM) + cmd |= PCI_COMMAND_MEMORY; + } + } + + /* + * We only write the command if it changed. + */ + if (cmd != old_cmd) + pci_write_config_word(dev, PCI_COMMAND, cmd); + return 0; +} + +void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max) +{ + unsigned long start = pci_resource_start(dev, bar); + unsigned long len = pci_resource_len(dev, bar); + unsigned long flags = pci_resource_flags(dev, bar); + + if (!len) + return NULL; + if (max && len > max) + len = max; + + if (!(flags & IORESOURCE_MEM)) { + pr_info("PCI: Trying to map invalid resource %#lx\n", flags); + start = 0; + } + + return (void __iomem *)start; +} +EXPORT_SYMBOL(pci_iomap); + + +/**************************************************************** + * + * Tile PCI config space read/write routines + * + ****************************************************************/ + +/* + * These are the normal read and write ops + * These are expanded with macros from pci_bus_read_config_byte() etc. + * + * devfn is the combined PCI slot & function. + * + * offset is in bytes, from the start of config space for the + * specified bus & slot. + */ + +static int __devinit tile_cfg_read(struct pci_bus *bus, + unsigned int devfn, + int offset, + int size, + u32 *val) +{ + struct pci_controller *controller = bus->sysdata; + int busnum = bus->number & 0xff; + int slot = (devfn >> 3) & 0x1f; + int function = devfn & 0x7; + u32 addr; + int config_mode = 1; + + /* + * There is no bridge between the Tile and bus 0, so we + * use config0 to talk to bus 0. + * + * If we're talking to a bus other than zero then we + * must have found a bridge. + */ + if (busnum == 0) { + /* + * We fake an empty slot for (busnum == 0) && (slot > 0), + * since there is only one slot on bus 0. + */ + if (slot) { + *val = 0xFFFFFFFF; + return 0; + } + config_mode = 0; + } + + addr = busnum << 20; /* Bus in 27:20 */ + addr |= slot << 15; /* Slot (device) in 19:15 */ + addr |= function << 12; /* Function is in 14:12 */ + addr |= (offset & 0xFFF); /* byte address in 0:11 */ + + return hv_dev_pread(controller->hv_cfg_fd[config_mode], 0, + (HV_VirtAddr)(val), size, addr); +} + + +/* + * See tile_cfg_read() for relevent comments. + * Note that "val" is the value to write, not a pointer to that value. + */ +static int __devinit tile_cfg_write(struct pci_bus *bus, + unsigned int devfn, + int offset, + int size, + u32 val) +{ + struct pci_controller *controller = bus->sysdata; + int busnum = bus->number & 0xff; + int slot = (devfn >> 3) & 0x1f; + int function = devfn & 0x7; + u32 addr; + int config_mode = 1; + HV_VirtAddr valp = (HV_VirtAddr)&val; + + /* + * For bus 0 slot 0 we use config 0 accesses. + */ + if (busnum == 0) { + /* + * We fake an empty slot for (busnum == 0) && (slot > 0), + * since there is only one slot on bus 0. + */ + if (slot) + return 0; + config_mode = 0; + } + + addr = busnum << 20; /* Bus in 27:20 */ + addr |= slot << 15; /* Slot (device) in 19:15 */ + addr |= function << 12; /* Function is in 14:12 */ + addr |= (offset & 0xFFF); /* byte address in 0:11 */ + +#ifdef __BIG_ENDIAN + /* Point to the correct part of the 32-bit "val". */ + valp += 4 - size; +#endif + + return hv_dev_pwrite(controller->hv_cfg_fd[config_mode], 0, + valp, size, addr); +} + + +static struct pci_ops tile_cfg_ops = { + .read = tile_cfg_read, + .write = tile_cfg_write, +}; + + +/* + * In the following, each PCI controller's mem_resources[1] + * represents its (non-prefetchable) PCI memory resource. + * mem_resources[0] and mem_resources[2] refer to its PCI I/O and + * prefetchable PCI memory resources, respectively. + * For more details, see pci_setup_bridge() in setup-bus.c. + * By comparing the target PCI memory address against the + * end address of controller 0, we can determine the controller + * that should accept the PCI memory access. + */ +#define TILE_READ(size, type) \ +type _tile_read##size(unsigned long addr) \ +{ \ + type val; \ + int idx = 0; \ + if (addr > controllers[0].mem_resources[1].end && \ + addr > controllers[0].mem_resources[2].end) \ + idx = 1; \ + if (hv_dev_pread(controllers[idx].hv_mem_fd, 0, \ + (HV_VirtAddr)(&val), sizeof(type), addr)) \ + pr_err("PCI: read %zd bytes at 0x%lX failed\n", \ + sizeof(type), addr); \ + return val; \ +} \ +EXPORT_SYMBOL(_tile_read##size) + +TILE_READ(b, u8); +TILE_READ(w, u16); +TILE_READ(l, u32); +TILE_READ(q, u64); + +#define TILE_WRITE(size, type) \ +void _tile_write##size(type val, unsigned long addr) \ +{ \ + int idx = 0; \ + if (addr > controllers[0].mem_resources[1].end && \ + addr > controllers[0].mem_resources[2].end) \ + idx = 1; \ + if (hv_dev_pwrite(controllers[idx].hv_mem_fd, 0, \ + (HV_VirtAddr)(&val), sizeof(type), addr)) \ + pr_err("PCI: write %zd bytes at 0x%lX failed\n", \ + sizeof(type), addr); \ +} \ +EXPORT_SYMBOL(_tile_write##size) + +TILE_WRITE(b, u8); +TILE_WRITE(w, u16); +TILE_WRITE(l, u32); +TILE_WRITE(q, u64); diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c index 7f7338c90784..1664cce7b0ac 100644 --- a/arch/um/drivers/line.c +++ b/arch/um/drivers/line.c @@ -727,6 +727,9 @@ struct winch { static void free_winch(struct winch *winch, int free_irq_ok) { + if (free_irq_ok) + free_irq(WINCH_IRQ, winch); + list_del(&winch->list); if (winch->pid != -1) @@ -735,8 +738,6 @@ static void free_winch(struct winch *winch, int free_irq_ok) os_close_file(winch->fd); if (winch->stack != 0) free_stack(winch->stack, 0); - if (free_irq_ok) - free_irq(WINCH_IRQ, winch); kfree(winch); } diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h index 4d293dced62f..9479a037419f 100644 --- a/arch/x86/include/asm/fixmap.h +++ b/arch/x86/include/asm/fixmap.h @@ -216,8 +216,8 @@ static inline unsigned long virt_to_fix(const unsigned long vaddr) } /* Return an pointer with offset calculated */ -static inline unsigned long __set_fixmap_offset(enum fixed_addresses idx, - phys_addr_t phys, pgprot_t flags) +static __always_inline unsigned long +__set_fixmap_offset(enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags) { __set_fixmap(idx, phys, flags); return fix_to_virt(idx) + (phys & (PAGE_SIZE - 1)); diff --git a/arch/x86/include/asm/xen/interface.h b/arch/x86/include/asm/xen/interface.h index e8506c1f0c55..1c10c88ee4e1 100644 --- a/arch/x86/include/asm/xen/interface.h +++ b/arch/x86/include/asm/xen/interface.h @@ -61,9 +61,9 @@ DEFINE_GUEST_HANDLE(void); #define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START) #endif -#ifndef machine_to_phys_mapping -#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START) -#endif +#define MACH2PHYS_VIRT_START mk_unsigned_long(__MACH2PHYS_VIRT_START) +#define MACH2PHYS_VIRT_END mk_unsigned_long(__MACH2PHYS_VIRT_END) +#define MACH2PHYS_NR_ENTRIES ((MACH2PHYS_VIRT_END-MACH2PHYS_VIRT_START)>>__MACH2PHYS_SHIFT) /* Maximum number of virtual CPUs in multi-processor guests. */ #define MAX_VIRT_CPUS 32 diff --git a/arch/x86/include/asm/xen/interface_32.h b/arch/x86/include/asm/xen/interface_32.h index 42a7e004ae5c..8413688b2571 100644 --- a/arch/x86/include/asm/xen/interface_32.h +++ b/arch/x86/include/asm/xen/interface_32.h @@ -32,6 +32,11 @@ /* And the trap vector is... */ #define TRAP_INSTR "int $0x82" +#define __MACH2PHYS_VIRT_START 0xF5800000 +#define __MACH2PHYS_VIRT_END 0xF6800000 + +#define __MACH2PHYS_SHIFT 2 + /* * Virtual addresses beyond this are not modifiable by guest OSes. The * machine->physical mapping table starts at this address, read-only. diff --git a/arch/x86/include/asm/xen/interface_64.h b/arch/x86/include/asm/xen/interface_64.h index 100d2662b97c..839a4811cf98 100644 --- a/arch/x86/include/asm/xen/interface_64.h +++ b/arch/x86/include/asm/xen/interface_64.h @@ -39,18 +39,7 @@ #define __HYPERVISOR_VIRT_END 0xFFFF880000000000 #define __MACH2PHYS_VIRT_START 0xFFFF800000000000 #define __MACH2PHYS_VIRT_END 0xFFFF804000000000 - -#ifndef HYPERVISOR_VIRT_START -#define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START) -#define HYPERVISOR_VIRT_END mk_unsigned_long(__HYPERVISOR_VIRT_END) -#endif - -#define MACH2PHYS_VIRT_START mk_unsigned_long(__MACH2PHYS_VIRT_START) -#define MACH2PHYS_VIRT_END mk_unsigned_long(__MACH2PHYS_VIRT_END) -#define MACH2PHYS_NR_ENTRIES ((MACH2PHYS_VIRT_END-MACH2PHYS_VIRT_START)>>3) -#ifndef machine_to_phys_mapping -#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START) -#endif +#define __MACH2PHYS_SHIFT 3 /* * int HYPERVISOR_set_segment_base(unsigned int which, unsigned long base) diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h index dd8c1414b3d5..8760cc60a21c 100644 --- a/arch/x86/include/asm/xen/page.h +++ b/arch/x86/include/asm/xen/page.h @@ -5,6 +5,7 @@ #include <linux/types.h> #include <linux/spinlock.h> #include <linux/pfn.h> +#include <linux/mm.h> #include <asm/uaccess.h> #include <asm/page.h> @@ -35,6 +36,8 @@ typedef struct xpaddr { #define MAX_DOMAIN_PAGES \ ((unsigned long)((u64)CONFIG_XEN_MAX_DOMAIN_MEMORY * 1024 * 1024 * 1024 / PAGE_SIZE)) +extern unsigned long *machine_to_phys_mapping; +extern unsigned int machine_to_phys_order; extern unsigned long get_phys_to_machine(unsigned long pfn); extern bool set_phys_to_machine(unsigned long pfn, unsigned long mfn); @@ -69,10 +72,8 @@ static inline unsigned long mfn_to_pfn(unsigned long mfn) if (xen_feature(XENFEAT_auto_translated_physmap)) return mfn; -#if 0 if (unlikely((mfn >> machine_to_phys_order) != 0)) - return max_mapnr; -#endif + return ~0; pfn = 0; /* diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 235c0f4d3861..7250bef7f49e 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -75,6 +75,11 @@ DEFINE_PER_CPU(struct vcpu_info, xen_vcpu_info); enum xen_domain_type xen_domain_type = XEN_NATIVE; EXPORT_SYMBOL_GPL(xen_domain_type); +unsigned long *machine_to_phys_mapping = (void *)MACH2PHYS_VIRT_START; +EXPORT_SYMBOL(machine_to_phys_mapping); +unsigned int machine_to_phys_order; +EXPORT_SYMBOL(machine_to_phys_order); + struct start_info *xen_start_info; EXPORT_SYMBOL_GPL(xen_start_info); @@ -1090,6 +1095,8 @@ static void __init xen_setup_stackprotector(void) /* First C function to be called on Xen boot */ asmlinkage void __init xen_start_kernel(void) { + struct physdev_set_iopl set_iopl; + int rc; pgd_t *pgd; if (!xen_start_info) @@ -1097,6 +1104,8 @@ asmlinkage void __init xen_start_kernel(void) xen_domain_type = XEN_PV_DOMAIN; + xen_setup_machphys_mapping(); + /* Install Xen paravirt ops */ pv_info = xen_info; pv_init_ops = xen_init_ops; @@ -1202,10 +1211,18 @@ asmlinkage void __init xen_start_kernel(void) #else pv_info.kernel_rpl = 0; #endif - /* set the limit of our address space */ xen_reserve_top(); + /* We used to do this in xen_arch_setup, but that is too late on AMD + * were early_cpu_init (run before ->arch_setup()) calls early_amd_init + * which pokes 0xcf8 port. + */ + set_iopl.iopl = 1; + rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl); + if (rc != 0) + xen_raw_printk("physdev_op failed %d\n", rc); + #ifdef CONFIG_X86_32 /* set up basic CPUID stuff */ cpu_detect(&new_cpu_data); diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 21ed8d7f75a5..790af908284e 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -2034,6 +2034,20 @@ static __init void xen_map_identity_early(pmd_t *pmd, unsigned long max_pfn) set_page_prot(pmd, PAGE_KERNEL_RO); } +void __init xen_setup_machphys_mapping(void) +{ + struct xen_machphys_mapping mapping; + unsigned long machine_to_phys_nr_ents; + + if (HYPERVISOR_memory_op(XENMEM_machphys_mapping, &mapping) == 0) { + machine_to_phys_mapping = (unsigned long *)mapping.v_start; + machine_to_phys_nr_ents = mapping.max_mfn + 1; + } else { + machine_to_phys_nr_ents = MACH2PHYS_NR_ENTRIES; + } + machine_to_phys_order = fls(machine_to_phys_nr_ents - 1); +} + #ifdef CONFIG_X86_64 static void convert_pfn_mfn(void *v) { @@ -2627,7 +2641,8 @@ int xen_remap_domain_mfn_range(struct vm_area_struct *vma, prot = __pgprot(pgprot_val(prot) | _PAGE_IOMAP); - vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP; + BUG_ON(!((vma->vm_flags & (VM_PFNMAP | VM_RESERVED | VM_IO)) == + (VM_PFNMAP | VM_RESERVED | VM_IO))); rmd.mfn = mfn; rmd.prot = prot; diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 769c4b01fa32..38fdffaa71d3 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -248,8 +248,7 @@ char * __init xen_memory_setup(void) else extra_pages = 0; - if (!xen_initial_domain()) - xen_add_extra_mem(extra_pages); + xen_add_extra_mem(extra_pages); return "Xen"; } @@ -337,9 +336,6 @@ void __cpuinit xen_enable_syscall(void) void __init xen_arch_setup(void) { - struct physdev_set_iopl set_iopl; - int rc; - xen_panic_handler_init(); HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_4gb_segments); @@ -356,11 +352,6 @@ void __init xen_arch_setup(void) xen_enable_sysenter(); xen_enable_syscall(); - set_iopl.iopl = 1; - rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl); - if (rc != 0) - printk(KERN_INFO "physdev_op failed %d\n", rc); - #ifdef CONFIG_ACPI if (!(xen_start_info->flags & SIF_INITDOMAIN)) { printk(KERN_INFO "ACPI in unprivileged domain disabled\n"); diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index 6c1b676643a9..896a2ced1d27 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -1547,31 +1547,16 @@ static int init_vqs(struct ports_device *portdev) nr_queues = use_multiport(portdev) ? (nr_ports + 1) * 2 : 2; vqs = kmalloc(nr_queues * sizeof(struct virtqueue *), GFP_KERNEL); - if (!vqs) { - err = -ENOMEM; - goto fail; - } io_callbacks = kmalloc(nr_queues * sizeof(vq_callback_t *), GFP_KERNEL); - if (!io_callbacks) { - err = -ENOMEM; - goto free_vqs; - } io_names = kmalloc(nr_queues * sizeof(char *), GFP_KERNEL); - if (!io_names) { - err = -ENOMEM; - goto free_callbacks; - } portdev->in_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *), GFP_KERNEL); - if (!portdev->in_vqs) { - err = -ENOMEM; - goto free_names; - } portdev->out_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *), GFP_KERNEL); - if (!portdev->out_vqs) { + if (!vqs || !io_callbacks || !io_names || !portdev->in_vqs || + !portdev->out_vqs) { err = -ENOMEM; - goto free_invqs; + goto free; } /* @@ -1605,7 +1590,7 @@ static int init_vqs(struct ports_device *portdev) io_callbacks, (const char **)io_names); if (err) - goto free_outvqs; + goto free; j = 0; portdev->in_vqs[0] = vqs[0]; @@ -1621,23 +1606,19 @@ static int init_vqs(struct ports_device *portdev) portdev->out_vqs[i] = vqs[j + 1]; } } - kfree(io_callbacks); kfree(io_names); + kfree(io_callbacks); kfree(vqs); return 0; -free_names: - kfree(io_names); -free_callbacks: - kfree(io_callbacks); -free_outvqs: +free: kfree(portdev->out_vqs); -free_invqs: kfree(portdev->in_vqs); -free_vqs: + kfree(io_names); + kfree(io_callbacks); kfree(vqs); -fail: + return err; } diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c index 3782f31f06d2..33facd0c45d1 100644 --- a/drivers/leds/leds-lp5521.c +++ b/drivers/leds/leds-lp5521.c @@ -125,11 +125,22 @@ struct lp5521_chip { u8 num_leds; }; -#define cdev_to_led(c) container_of(c, struct lp5521_led, cdev) -#define engine_to_lp5521(eng) container_of((eng), struct lp5521_chip, \ - engines[(eng)->id - 1]) -#define led_to_lp5521(led) container_of((led), struct lp5521_chip, \ - leds[(led)->id]) +static inline struct lp5521_led *cdev_to_led(struct led_classdev *cdev) +{ + return container_of(cdev, struct lp5521_led, cdev); +} + +static inline struct lp5521_chip *engine_to_lp5521(struct lp5521_engine *engine) +{ + return container_of(engine, struct lp5521_chip, + engines[engine->id - 1]); +} + +static inline struct lp5521_chip *led_to_lp5521(struct lp5521_led *led) +{ + return container_of(led, struct lp5521_chip, + leds[led->id]); +} static void lp5521_led_brightness_work(struct work_struct *work); @@ -185,14 +196,17 @@ static int lp5521_load_program(struct lp5521_engine *eng, const u8 *pattern) /* move current engine to direct mode and remember the state */ ret = lp5521_set_engine_mode(eng, LP5521_CMD_DIRECT); - usleep_range(1000, 10000); + /* Mode change requires min 500 us delay. 1 - 2 ms with margin */ + usleep_range(1000, 2000); ret |= lp5521_read(client, LP5521_REG_OP_MODE, &mode); /* For loading, all the engines to load mode */ lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT); - usleep_range(1000, 10000); + /* Mode change requires min 500 us delay. 1 - 2 ms with margin */ + usleep_range(1000, 2000); lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_LOAD); - usleep_range(1000, 10000); + /* Mode change requires min 500 us delay. 1 - 2 ms with margin */ + usleep_range(1000, 2000); addr = LP5521_PROG_MEM_BASE + eng->prog_page * LP5521_PROG_MEM_SIZE; i2c_smbus_write_i2c_block_data(client, @@ -231,10 +245,6 @@ static int lp5521_configure(struct i2c_client *client, lp5521_init_engine(chip, attr_group); - lp5521_write(client, LP5521_REG_RESET, 0xff); - - usleep_range(10000, 20000); - /* Set all PWMs to direct control mode */ ret = lp5521_write(client, LP5521_REG_OP_MODE, 0x3F); @@ -251,8 +261,8 @@ static int lp5521_configure(struct i2c_client *client, ret |= lp5521_write(client, LP5521_REG_ENABLE, LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM | LP5521_EXEC_RUN); - /* enable takes 500us */ - usleep_range(500, 20000); + /* enable takes 500us. 1 - 2 ms leaves some margin */ + usleep_range(1000, 2000); return ret; } @@ -305,7 +315,8 @@ static int lp5521_detect(struct i2c_client *client) LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM); if (ret) return ret; - usleep_range(1000, 10000); + /* enable takes 500us. 1 - 2 ms leaves some margin */ + usleep_range(1000, 2000); ret = lp5521_read(client, LP5521_REG_ENABLE, &buf); if (ret) return ret; @@ -693,11 +704,16 @@ static int lp5521_probe(struct i2c_client *client, if (pdata->enable) { pdata->enable(0); - usleep_range(1000, 10000); + usleep_range(1000, 2000); /* Keep enable down at least 1ms */ pdata->enable(1); - usleep_range(1000, 10000); /* Spec says min 500us */ + usleep_range(1000, 2000); /* 500us abs min. */ } + lp5521_write(client, LP5521_REG_RESET, 0xff); + usleep_range(10000, 20000); /* + * Exact value is not available. 10 - 20ms + * appears to be enough for reset. + */ ret = lp5521_detect(client); if (ret) { diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c index 1e11fcc08b28..0cc4ead2fd8b 100644 --- a/drivers/leds/leds-lp5523.c +++ b/drivers/leds/leds-lp5523.c @@ -134,15 +134,18 @@ struct lp5523_chip { u8 num_leds; }; -#define cdev_to_led(c) container_of(c, struct lp5523_led, cdev) +static inline struct lp5523_led *cdev_to_led(struct led_classdev *cdev) +{ + return container_of(cdev, struct lp5523_led, cdev); +} -static struct lp5523_chip *engine_to_lp5523(struct lp5523_engine *engine) +static inline struct lp5523_chip *engine_to_lp5523(struct lp5523_engine *engine) { return container_of(engine, struct lp5523_chip, engines[engine->id - 1]); } -static struct lp5523_chip *led_to_lp5523(struct lp5523_led *led) +static inline struct lp5523_chip *led_to_lp5523(struct lp5523_led *led) { return container_of(led, struct lp5523_chip, leds[led->id]); @@ -200,13 +203,9 @@ static int lp5523_configure(struct i2c_client *client) { 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0}, }; - lp5523_write(client, LP5523_REG_RESET, 0xff); - - usleep_range(10000, 100000); - ret |= lp5523_write(client, LP5523_REG_ENABLE, LP5523_ENABLE); - /* Chip startup time after reset is 500 us */ - usleep_range(1000, 10000); + /* Chip startup time is 500 us, 1 - 2 ms gives some margin */ + usleep_range(1000, 2000); ret |= lp5523_write(client, LP5523_REG_CONFIG, LP5523_AUTO_INC | LP5523_PWR_SAVE | @@ -243,8 +242,8 @@ static int lp5523_configure(struct i2c_client *client) return -1; } - /* Wait 3ms and check the engine status */ - usleep_range(3000, 20000); + /* Let the programs run for couple of ms and check the engine status */ + usleep_range(3000, 6000); lp5523_read(client, LP5523_REG_STATUS, &status); status &= LP5523_ENG_STATUS_MASK; @@ -449,10 +448,10 @@ static ssize_t lp5523_selftest(struct device *dev, /* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */ lp5523_write(chip->client, LP5523_REG_LED_TEST_CTRL, LP5523_EN_LEDTEST | 16); - usleep_range(3000, 10000); + usleep_range(3000, 6000); /* ADC conversion time is typically 2.7 ms */ ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status); if (!(status & LP5523_LEDTEST_DONE)) - usleep_range(3000, 10000); + usleep_range(3000, 6000); /* Was not ready. Wait little bit */ ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &vdd); vdd--; /* There may be some fluctuation in measurement */ @@ -468,16 +467,16 @@ static ssize_t lp5523_selftest(struct device *dev, chip->pdata->led_config[i].led_current); lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0xff); - /* let current stabilize 2ms before measurements start */ - usleep_range(2000, 10000); + /* let current stabilize 2 - 4ms before measurements start */ + usleep_range(2000, 4000); lp5523_write(chip->client, LP5523_REG_LED_TEST_CTRL, LP5523_EN_LEDTEST | i); - /* ledtest takes 2.7ms */ - usleep_range(3000, 10000); + /* ADC conversion time is 2.7 ms typically */ + usleep_range(3000, 6000); ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status); if (!(status & LP5523_LEDTEST_DONE)) - usleep_range(3000, 10000); + usleep_range(3000, 6000);/* Was not ready. Wait. */ ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &adc); if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM) @@ -930,11 +929,16 @@ static int lp5523_probe(struct i2c_client *client, if (pdata->enable) { pdata->enable(0); - usleep_range(1000, 10000); + usleep_range(1000, 2000); /* Keep enable down at least 1ms */ pdata->enable(1); - usleep_range(1000, 10000); /* Spec says min 500us */ + usleep_range(1000, 2000); /* 500us abs min. */ } + lp5523_write(client, LP5523_REG_RESET, 0xff); + usleep_range(10000, 20000); /* + * Exact value is not available. 10 - 20ms + * appears to be enough for reset. + */ ret = lp5523_detect(client); if (ret) goto fail2; diff --git a/drivers/leds/leds-ss4200.c b/drivers/leds/leds-ss4200.c index a688293abd0b..614ebebaaa28 100644 --- a/drivers/leds/leds-ss4200.c +++ b/drivers/leds/leds-ss4200.c @@ -102,6 +102,7 @@ static struct dmi_system_id __initdata nas_led_whitelist[] = { DMI_MATCH(DMI_PRODUCT_VERSION, "1.00.00") } }, + {} }; /* diff --git a/drivers/md/md.c b/drivers/md/md.c index 324a3663fcda..84c46a161927 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1337,7 +1337,7 @@ super_90_rdev_size_change(mdk_rdev_t *rdev, sector_t num_sectors) md_super_write(rdev->mddev, rdev, rdev->sb_start, rdev->sb_size, rdev->sb_page); md_super_wait(rdev->mddev); - return num_sectors / 2; /* kB for sysfs */ + return num_sectors; } @@ -1704,7 +1704,7 @@ super_1_rdev_size_change(mdk_rdev_t *rdev, sector_t num_sectors) md_super_write(rdev->mddev, rdev, rdev->sb_start, rdev->sb_size, rdev->sb_page); md_super_wait(rdev->mddev); - return num_sectors / 2; /* kB for sysfs */ + return num_sectors; } static struct super_type super_types[] = { @@ -4338,6 +4338,8 @@ static int md_alloc(dev_t dev, char *name) if (mddev->kobj.sd && sysfs_create_group(&mddev->kobj, &md_bitmap_group)) printk(KERN_DEBUG "pointless warning\n"); + + blk_queue_flush(mddev->queue, REQ_FLUSH | REQ_FUA); abort: mutex_unlock(&disks_mutex); if (!error && mddev->kobj.sd) { diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 45f8324196ec..845cf95b612c 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1161,6 +1161,7 @@ static int raid1_remove_disk(mddev_t *mddev, int number) * is not possible. */ if (!test_bit(Faulty, &rdev->flags) && + !mddev->recovery_disabled && mddev->degraded < conf->raid_disks) { err = -EBUSY; goto abort; diff --git a/drivers/misc/isl29020.c b/drivers/misc/isl29020.c index ca47e6285075..307aada5fffe 100644 --- a/drivers/misc/isl29020.c +++ b/drivers/misc/isl29020.c @@ -183,9 +183,7 @@ static int isl29020_probe(struct i2c_client *client, static int isl29020_remove(struct i2c_client *client) { - struct als_data *data = i2c_get_clientdata(client); sysfs_remove_group(&client->dev.kobj, &m_als_gr); - kfree(data); return 0; } @@ -245,6 +243,6 @@ static void __exit sensor_isl29020_exit(void) module_init(sensor_isl29020_init); module_exit(sensor_isl29020_exit); -MODULE_AUTHOR("Kalhan Trisal <kalhan.trisal@intel.com"); +MODULE_AUTHOR("Kalhan Trisal <kalhan.trisal@intel.com>"); MODULE_DESCRIPTION("Intersil isl29020 ALS Driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c index d551f09ccb79..6956f7e7d439 100644 --- a/drivers/misc/sgi-xp/xpc_partition.c +++ b/drivers/misc/sgi-xp/xpc_partition.c @@ -439,18 +439,23 @@ xpc_discovery(void) * nodes that can comprise an access protection grouping. The access * protection is in regards to memory, IOI and IPI. */ - max_regions = 64; region_size = xp_region_size; - switch (region_size) { - case 128: - max_regions *= 2; - case 64: - max_regions *= 2; - case 32: - max_regions *= 2; - region_size = 16; - DBUG_ON(!is_shub2()); + if (is_uv()) + max_regions = 256; + else { + max_regions = 64; + + switch (region_size) { + case 128: + max_regions *= 2; + case 64: + max_regions *= 2; + case 32: + max_regions *= 2; + region_size = 16; + DBUG_ON(!is_shub2()); + } } for (region = 0; region < max_regions; region++) { diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index f6668cdaac85..43db398437b7 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2945,6 +2945,18 @@ source "drivers/s390/net/Kconfig" source "drivers/net/caif/Kconfig" +config TILE_NET + tristate "Tilera GBE/XGBE network driver support" + depends on TILE + default y + select CRC32 + help + This is a standard Linux network device driver for the + on-chip Tilera Gigabit Ethernet and XAUI interfaces. + + To compile this driver as a module, choose M here: the module + will be called tile_net. + config XEN_NETDEV_FRONTEND tristate "Xen network device frontend driver" depends on XEN diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 652fc6b98039..b90738d13994 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -301,3 +301,4 @@ obj-$(CONFIG_CAIF) += caif/ obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon/ obj-$(CONFIG_PCH_GBE) += pch_gbe/ +obj-$(CONFIG_TILE_NET) += tile/ diff --git a/drivers/net/atl1c/atl1c_hw.c b/drivers/net/atl1c/atl1c_hw.c index 919080b2c3a5..1bf672009948 100644 --- a/drivers/net/atl1c/atl1c_hw.c +++ b/drivers/net/atl1c/atl1c_hw.c @@ -82,7 +82,7 @@ static int atl1c_get_permanent_address(struct atl1c_hw *hw) addr[0] = addr[1] = 0; AT_READ_REG(hw, REG_OTP_CTRL, &otp_ctrl_data); if (atl1c_check_eeprom_exist(hw)) { - if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c_b) { + if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c) { /* Enable OTP CLK */ if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) { otp_ctrl_data |= OTP_CTRL_CLK_EN; diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 4686c3983fc3..4d62f7bfa036 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -31,7 +31,7 @@ char e1000_driver_name[] = "e1000"; static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; -#define DRV_VERSION "7.3.21-k6-NAPI" +#define DRV_VERSION "7.3.21-k8-NAPI" const char e1000_driver_version[] = DRV_VERSION; static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; @@ -485,9 +485,6 @@ void e1000_down(struct e1000_adapter *adapter) struct net_device *netdev = adapter->netdev; u32 rctl, tctl; - /* signal that we're down so the interrupt handler does not - * reschedule our watchdog timer */ - set_bit(__E1000_DOWN, &adapter->flags); /* disable receives in the hardware */ rctl = er32(RCTL); @@ -508,6 +505,13 @@ void e1000_down(struct e1000_adapter *adapter) e1000_irq_disable(adapter); + /* + * Setting DOWN must be after irq_disable to prevent + * a screaming interrupt. Setting DOWN also prevents + * timers and tasks from rescheduling. + */ + set_bit(__E1000_DOWN, &adapter->flags); + del_timer_sync(&adapter->tx_fifo_stall_timer); del_timer_sync(&adapter->watchdog_timer); del_timer_sync(&adapter->phy_info_timer); diff --git a/drivers/net/irda/sh_sir.c b/drivers/net/irda/sh_sir.c index 00b38bccd6d0..52a7c86af663 100644 --- a/drivers/net/irda/sh_sir.c +++ b/drivers/net/irda/sh_sir.c @@ -258,7 +258,7 @@ static int sh_sir_set_baudrate(struct sh_sir_self *self, u32 baudrate) /* Baud Rate Error Correction x 10000 */ u32 rate_err_array[] = { - 0000, 0625, 1250, 1875, + 0, 625, 1250, 1875, 2500, 3125, 3750, 4375, 5000, 5625, 6250, 6875, 7500, 8125, 8750, 9375, diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index f0bd1a1aba3a..e8b9c53c304b 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -30,11 +30,14 @@ #include <linux/ethtool.h> #include <linux/phy.h> #include <linux/marvell_phy.h> +#include <linux/of.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/uaccess.h> +#define MII_MARVELL_PHY_PAGE 22 + #define MII_M1011_IEVENT 0x13 #define MII_M1011_IEVENT_CLEAR 0x0000 @@ -80,7 +83,6 @@ #define MII_88E1121_PHY_LED_CTRL 16 #define MII_88E1121_PHY_LED_PAGE 3 #define MII_88E1121_PHY_LED_DEF 0x0030 -#define MII_88E1121_PHY_PAGE 22 #define MII_M1011_PHY_STATUS 0x11 #define MII_M1011_PHY_STATUS_1000 0x8000 @@ -186,13 +188,94 @@ static int marvell_config_aneg(struct phy_device *phydev) return 0; } +#ifdef CONFIG_OF_MDIO +/* + * Set and/or override some configuration registers based on the + * marvell,reg-init property stored in the of_node for the phydev. + * + * marvell,reg-init = <reg-page reg mask value>,...; + * + * There may be one or more sets of <reg-page reg mask value>: + * + * reg-page: which register bank to use. + * reg: the register. + * mask: if non-zero, ANDed with existing register value. + * value: ORed with the masked value and written to the regiser. + * + */ +static int marvell_of_reg_init(struct phy_device *phydev) +{ + const __be32 *paddr; + int len, i, saved_page, current_page, page_changed, ret; + + if (!phydev->dev.of_node) + return 0; + + paddr = of_get_property(phydev->dev.of_node, "marvell,reg-init", &len); + if (!paddr || len < (4 * sizeof(*paddr))) + return 0; + + saved_page = phy_read(phydev, MII_MARVELL_PHY_PAGE); + if (saved_page < 0) + return saved_page; + page_changed = 0; + current_page = saved_page; + + ret = 0; + len /= sizeof(*paddr); + for (i = 0; i < len - 3; i += 4) { + u16 reg_page = be32_to_cpup(paddr + i); + u16 reg = be32_to_cpup(paddr + i + 1); + u16 mask = be32_to_cpup(paddr + i + 2); + u16 val_bits = be32_to_cpup(paddr + i + 3); + int val; + + if (reg_page != current_page) { + current_page = reg_page; + page_changed = 1; + ret = phy_write(phydev, MII_MARVELL_PHY_PAGE, reg_page); + if (ret < 0) + goto err; + } + + val = 0; + if (mask) { + val = phy_read(phydev, reg); + if (val < 0) { + ret = val; + goto err; + } + val &= mask; + } + val |= val_bits; + + ret = phy_write(phydev, reg, val); + if (ret < 0) + goto err; + + } +err: + if (page_changed) { + i = phy_write(phydev, MII_MARVELL_PHY_PAGE, saved_page); + if (ret == 0) + ret = i; + } + return ret; +} +#else +static int marvell_of_reg_init(struct phy_device *phydev) +{ + return 0; +} +#endif /* CONFIG_OF_MDIO */ + static int m88e1121_config_aneg(struct phy_device *phydev) { int err, oldpage, mscr; - oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE); + oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE); - err = phy_write(phydev, MII_88E1121_PHY_PAGE, + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_MSCR_PAGE); if (err < 0) return err; @@ -218,7 +301,7 @@ static int m88e1121_config_aneg(struct phy_device *phydev) return err; } - phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage); + phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage); err = phy_write(phydev, MII_BMCR, BMCR_RESET); if (err < 0) @@ -229,11 +312,11 @@ static int m88e1121_config_aneg(struct phy_device *phydev) if (err < 0) return err; - oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE); + oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE); - phy_write(phydev, MII_88E1121_PHY_PAGE, MII_88E1121_PHY_LED_PAGE); + phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_LED_PAGE); phy_write(phydev, MII_88E1121_PHY_LED_CTRL, MII_88E1121_PHY_LED_DEF); - phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage); + phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage); err = genphy_config_aneg(phydev); @@ -244,9 +327,9 @@ static int m88e1318_config_aneg(struct phy_device *phydev) { int err, oldpage, mscr; - oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE); + oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE); - err = phy_write(phydev, MII_88E1121_PHY_PAGE, + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_MSCR_PAGE); if (err < 0) return err; @@ -258,7 +341,7 @@ static int m88e1318_config_aneg(struct phy_device *phydev) if (err < 0) return err; - err = phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage); + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage); if (err < 0) return err; @@ -368,6 +451,9 @@ static int m88e1111_config_init(struct phy_device *phydev) return err; } + err = marvell_of_reg_init(phydev); + if (err < 0) + return err; err = phy_write(phydev, MII_BMCR, BMCR_RESET); if (err < 0) @@ -398,7 +484,7 @@ static int m88e1118_config_init(struct phy_device *phydev) int err; /* Change address */ - err = phy_write(phydev, 0x16, 0x0002); + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002); if (err < 0) return err; @@ -408,7 +494,7 @@ static int m88e1118_config_init(struct phy_device *phydev) return err; /* Change address */ - err = phy_write(phydev, 0x16, 0x0003); + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0003); if (err < 0) return err; @@ -420,8 +506,42 @@ static int m88e1118_config_init(struct phy_device *phydev) if (err < 0) return err; + err = marvell_of_reg_init(phydev); + if (err < 0) + return err; + /* Reset address */ - err = phy_write(phydev, 0x16, 0x0); + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0); + if (err < 0) + return err; + + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + if (err < 0) + return err; + + return 0; +} + +static int m88e1149_config_init(struct phy_device *phydev) +{ + int err; + + /* Change address */ + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002); + if (err < 0) + return err; + + /* Enable 1000 Mbit */ + err = phy_write(phydev, 0x15, 0x1048); + if (err < 0) + return err; + + err = marvell_of_reg_init(phydev); + if (err < 0) + return err; + + /* Reset address */ + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0); if (err < 0) return err; @@ -491,6 +611,10 @@ static int m88e1145_config_init(struct phy_device *phydev) } } + err = marvell_of_reg_init(phydev); + if (err < 0) + return err; + return 0; } @@ -685,6 +809,19 @@ static struct phy_driver marvell_drivers[] = { .driver = { .owner = THIS_MODULE }, }, { + .phy_id = MARVELL_PHY_ID_88E1149R, + .phy_id_mask = MARVELL_PHY_ID_MASK, + .name = "Marvell 88E1149R", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &m88e1149_config_init, + .config_aneg = &m88e1118_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &marvell_ack_interrupt, + .config_intr = &marvell_config_intr, + .driver = { .owner = THIS_MODULE }, + }, + { .phy_id = MARVELL_PHY_ID_88E1240, .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1240", @@ -735,6 +872,7 @@ static struct mdio_device_id __maybe_unused marvell_tbl[] = { { 0x01410e10, 0xfffffff0 }, { 0x01410cb0, 0xfffffff0 }, { 0x01410cd0, 0xfffffff0 }, + { 0x01410e50, 0xfffffff0 }, { 0x01410e30, 0xfffffff0 }, { 0x01410e90, 0xfffffff0 }, { } diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index c30e0fe55a31..528eaef5308f 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -62,15 +62,15 @@ static const u32 default_msg = /* NETIF_MSG_PKTDATA | */ NETIF_MSG_HW | NETIF_MSG_WOL | 0; -static int debug = 0x00007fff; /* defaults above */ -module_param(debug, int, 0); +static int debug = -1; /* defaults above */ +module_param(debug, int, 0664); MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); #define MSIX_IRQ 0 #define MSI_IRQ 1 #define LEG_IRQ 2 static int qlge_irq_type = MSIX_IRQ; -module_param(qlge_irq_type, int, MSIX_IRQ); +module_param(qlge_irq_type, int, 0664); MODULE_PARM_DESC(qlge_irq_type, "0 = MSI-X, 1 = MSI, 2 = Legacy."); static int qlge_mpi_coredump; diff --git a/drivers/net/tile/Makefile b/drivers/net/tile/Makefile new file mode 100644 index 000000000000..f634f142cab4 --- /dev/null +++ b/drivers/net/tile/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for the TILE on-chip networking support. +# + +obj-$(CONFIG_TILE_NET) += tile_net.o +ifdef CONFIG_TILEGX +tile_net-objs := tilegx.o mpipe.o iorpc_mpipe.o dma_queue.o +else +tile_net-objs := tilepro.o +endif diff --git a/drivers/net/tile/tilepro.c b/drivers/net/tile/tilepro.c new file mode 100644 index 000000000000..0e6bac5ec65b --- /dev/null +++ b/drivers/net/tile/tilepro.c @@ -0,0 +1,2406 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/moduleparam.h> +#include <linux/sched.h> +#include <linux/kernel.h> /* printk() */ +#include <linux/slab.h> /* kmalloc() */ +#include <linux/errno.h> /* error codes */ +#include <linux/types.h> /* size_t */ +#include <linux/interrupt.h> +#include <linux/in.h> +#include <linux/netdevice.h> /* struct device, and other headers */ +#include <linux/etherdevice.h> /* eth_type_trans */ +#include <linux/skbuff.h> +#include <linux/ioctl.h> +#include <linux/cdev.h> +#include <linux/hugetlb.h> +#include <linux/in6.h> +#include <linux/timer.h> +#include <linux/io.h> +#include <asm/checksum.h> +#include <asm/homecache.h> + +#include <hv/drv_xgbe_intf.h> +#include <hv/drv_xgbe_impl.h> +#include <hv/hypervisor.h> +#include <hv/netio_intf.h> + +/* For TSO */ +#include <linux/ip.h> +#include <linux/tcp.h> + + +/* There is no singlethread_cpu, so schedule work on the current cpu. */ +#define singlethread_cpu -1 + + +/* + * First, "tile_net_init_module()" initializes all four "devices" which + * can be used by linux. + * + * Then, "ifconfig DEVICE up" calls "tile_net_open()", which analyzes + * the network cpus, then uses "tile_net_open_aux()" to initialize + * LIPP/LEPP, and then uses "tile_net_open_inner()" to register all + * the tiles, provide buffers to LIPP, allow ingress to start, and + * turn on hypervisor interrupt handling (and NAPI) on all tiles. + * + * If registration fails due to the link being down, then "retry_work" + * is used to keep calling "tile_net_open_inner()" until it succeeds. + * + * If "ifconfig DEVICE down" is called, it uses "tile_net_stop()" to + * stop egress, drain the LIPP buffers, unregister all the tiles, stop + * LIPP/LEPP, and wipe the LEPP queue. + * + * We start out with the ingress interrupt enabled on each CPU. When + * this interrupt fires, we disable it, and call "napi_schedule()". + * This will cause "tile_net_poll()" to be called, which will pull + * packets from the netio queue, filtering them out, or passing them + * to "netif_receive_skb()". If our budget is exhausted, we will + * return, knowing we will be called again later. Otherwise, we + * reenable the ingress interrupt, and call "napi_complete()". + * + * + * NOTE: The use of "native_driver" ensures that EPP exists, and that + * "epp_sendv" is legal, and that "LIPP" is being used. + * + * NOTE: Failing to free completions for an arbitrarily long time + * (which is defined to be illegal) does in fact cause bizarre + * problems. The "egress_timer" helps prevent this from happening. + * + * NOTE: The egress code can be interrupted by the interrupt handler. + */ + + +/* HACK: Allow use of "jumbo" packets. */ +/* This should be 1500 if "jumbo" is not set in LIPP. */ +/* This should be at most 10226 (10240 - 14) if "jumbo" is set in LIPP. */ +/* ISSUE: This has not been thoroughly tested (except at 1500). */ +#define TILE_NET_MTU 1500 + +/* HACK: Define to support GSO. */ +/* ISSUE: This may actually hurt performance of the TCP blaster. */ +/* #define TILE_NET_GSO */ + +/* Define this to collapse "duplicate" acks. */ +/* #define IGNORE_DUP_ACKS */ + +/* HACK: Define this to verify incoming packets. */ +/* #define TILE_NET_VERIFY_INGRESS */ + +/* Use 3000 to enable the Linux Traffic Control (QoS) layer, else 0. */ +#define TILE_NET_TX_QUEUE_LEN 0 + +/* Define to dump packets (prints out the whole packet on tx and rx). */ +/* #define TILE_NET_DUMP_PACKETS */ + +/* Define to enable debug spew (all PDEBUG's are enabled). */ +/* #define TILE_NET_DEBUG */ + + +/* Define to activate paranoia checks. */ +/* #define TILE_NET_PARANOIA */ + +/* Default transmit lockup timeout period, in jiffies. */ +#define TILE_NET_TIMEOUT (5 * HZ) + +/* Default retry interval for bringing up the NetIO interface, in jiffies. */ +#define TILE_NET_RETRY_INTERVAL (5 * HZ) + +/* Number of ports (xgbe0, xgbe1, gbe0, gbe1). */ +#define TILE_NET_DEVS 4 + + + +/* Paranoia. */ +#if NET_IP_ALIGN != LIPP_PACKET_PADDING +#error "NET_IP_ALIGN must match LIPP_PACKET_PADDING." +#endif + + +/* Debug print. */ +#ifdef TILE_NET_DEBUG +#define PDEBUG(fmt, args...) net_printk(fmt, ## args) +#else +#define PDEBUG(fmt, args...) +#endif + + +MODULE_AUTHOR("Tilera"); +MODULE_LICENSE("GPL"); + + +#define IS_MULTICAST(mac_addr) \ + (((u8 *)(mac_addr))[0] & 0x01) + +#define IS_BROADCAST(mac_addr) \ + (((u16 *)(mac_addr))[0] == 0xffff) + + +/* + * Queue of incoming packets for a specific cpu and device. + * + * Includes a pointer to the "system" data, and the actual "user" data. + */ +struct tile_netio_queue { + netio_queue_impl_t *__system_part; + netio_queue_user_impl_t __user_part; + +}; + + +/* + * Statistics counters for a specific cpu and device. + */ +struct tile_net_stats_t { + u32 rx_packets; + u32 rx_bytes; + u32 tx_packets; + u32 tx_bytes; +}; + + +/* + * Info for a specific cpu and device. + * + * ISSUE: There is a "dev" pointer in "napi" as well. + */ +struct tile_net_cpu { + /* The NAPI struct. */ + struct napi_struct napi; + /* Packet queue. */ + struct tile_netio_queue queue; + /* Statistics. */ + struct tile_net_stats_t stats; + /* ISSUE: Is this needed? */ + bool napi_enabled; + /* True if this tile has succcessfully registered with the IPP. */ + bool registered; + /* True if the link was down last time we tried to register. */ + bool link_down; + /* True if "egress_timer" is scheduled. */ + bool egress_timer_scheduled; + /* Number of small sk_buffs which must still be provided. */ + unsigned int num_needed_small_buffers; + /* Number of large sk_buffs which must still be provided. */ + unsigned int num_needed_large_buffers; + /* A timer for handling egress completions. */ + struct timer_list egress_timer; +}; + + +/* + * Info for a specific device. + */ +struct tile_net_priv { + /* Our network device. */ + struct net_device *dev; + /* The actual egress queue. */ + lepp_queue_t *epp_queue; + /* Protects "epp_queue->cmd_tail" and "epp_queue->comp_tail" */ + spinlock_t cmd_lock; + /* Protects "epp_queue->comp_head". */ + spinlock_t comp_lock; + /* The hypervisor handle for this interface. */ + int hv_devhdl; + /* The intr bit mask that IDs this device. */ + u32 intr_id; + /* True iff "tile_net_open_aux()" has succeeded. */ + int partly_opened; + /* True iff "tile_net_open_inner()" has succeeded. */ + int fully_opened; + /* Effective network cpus. */ + struct cpumask network_cpus_map; + /* Number of network cpus. */ + int network_cpus_count; + /* Credits per network cpu. */ + int network_cpus_credits; + /* Network stats. */ + struct net_device_stats stats; + /* For NetIO bringup retries. */ + struct delayed_work retry_work; + /* Quick access to per cpu data. */ + struct tile_net_cpu *cpu[NR_CPUS]; +}; + + +/* + * The actual devices (xgbe0, xgbe1, gbe0, gbe1). + */ +static struct net_device *tile_net_devs[TILE_NET_DEVS]; + +/* + * The "tile_net_cpu" structures for each device. + */ +static DEFINE_PER_CPU(struct tile_net_cpu, hv_xgbe0); +static DEFINE_PER_CPU(struct tile_net_cpu, hv_xgbe1); +static DEFINE_PER_CPU(struct tile_net_cpu, hv_gbe0); +static DEFINE_PER_CPU(struct tile_net_cpu, hv_gbe1); + + +/* + * True if "network_cpus" was specified. + */ +static bool network_cpus_used; + +/* + * The actual cpus in "network_cpus". + */ +static struct cpumask network_cpus_map; + + + +#ifdef TILE_NET_DEBUG +/* + * printk with extra stuff. + * + * We print the CPU we're running in brackets. + */ +static void net_printk(char *fmt, ...) +{ + int i; + int len; + va_list args; + static char buf[256]; + + len = sprintf(buf, "tile_net[%2.2d]: ", smp_processor_id()); + va_start(args, fmt); + i = vscnprintf(buf + len, sizeof(buf) - len - 1, fmt, args); + va_end(args); + buf[255] = '\0'; + pr_notice(buf); +} +#endif + + +#ifdef TILE_NET_DUMP_PACKETS +/* + * Dump a packet. + */ +static void dump_packet(unsigned char *data, unsigned long length, char *s) +{ + unsigned long i; + static unsigned int count; + + pr_info("dump_packet(data %p, length 0x%lx s %s count 0x%x)\n", + data, length, s, count++); + + pr_info("\n"); + + for (i = 0; i < length; i++) { + if ((i & 0xf) == 0) + sprintf(buf, "%8.8lx:", i); + sprintf(buf + strlen(buf), " %2.2x", data[i]); + if ((i & 0xf) == 0xf || i == length - 1) + pr_info("%s\n", buf); + } +} +#endif + + +/* + * Provide support for the __netio_fastio1() swint + * (see <hv/drv_xgbe_intf.h> for how it is used). + * + * The fastio swint2 call may clobber all the caller-saved registers. + * It rarely clobbers memory, but we allow for the possibility in + * the signature just to be on the safe side. + * + * Also, gcc doesn't seem to allow an input operand to be + * clobbered, so we fake it with dummy outputs. + * + * This function can't be static because of the way it is declared + * in the netio header. + */ +inline int __netio_fastio1(u32 fastio_index, u32 arg0) +{ + long result, clobber_r1, clobber_r10; + asm volatile("swint2" + : "=R00" (result), + "=R01" (clobber_r1), "=R10" (clobber_r10) + : "R10" (fastio_index), "R01" (arg0) + : "memory", "r2", "r3", "r4", + "r5", "r6", "r7", "r8", "r9", + "r11", "r12", "r13", "r14", + "r15", "r16", "r17", "r18", "r19", + "r20", "r21", "r22", "r23", "r24", + "r25", "r26", "r27", "r28", "r29"); + return result; +} + + +/* + * Provide a linux buffer to LIPP. + */ +static void tile_net_provide_linux_buffer(struct tile_net_cpu *info, + void *va, bool small) +{ + struct tile_netio_queue *queue = &info->queue; + + /* Convert "va" and "small" to "linux_buffer_t". */ + unsigned int buffer = ((unsigned int)(__pa(va) >> 7) << 1) + small; + + __netio_fastio_free_buffer(queue->__user_part.__fastio_index, buffer); +} + + +/* + * Provide a linux buffer for LIPP. + */ +static bool tile_net_provide_needed_buffer(struct tile_net_cpu *info, + bool small) +{ + /* ISSUE: What should we use here? */ + unsigned int large_size = NET_IP_ALIGN + TILE_NET_MTU + 100; + + /* Round up to ensure to avoid "false sharing" with last cache line. */ + unsigned int buffer_size = + (((small ? LIPP_SMALL_PACKET_SIZE : large_size) + + CHIP_L2_LINE_SIZE() - 1) & -CHIP_L2_LINE_SIZE()); + + /* + * ISSUE: Since CPAs are 38 bits, and we can only encode the + * high 31 bits in a "linux_buffer_t", the low 7 bits must be + * zero, and thus, we must align the actual "va" mod 128. + */ + const unsigned long align = 128; + + struct sk_buff *skb; + void *va; + + struct sk_buff **skb_ptr; + + /* Note that "dev_alloc_skb()" adds NET_SKB_PAD more bytes, */ + /* and also "reserves" that many bytes. */ + /* ISSUE: Can we "share" the NET_SKB_PAD bytes with "skb_ptr"? */ + int len = sizeof(*skb_ptr) + align + buffer_size; + + while (1) { + + /* Allocate (or fail). */ + skb = dev_alloc_skb(len); + if (skb == NULL) + return false; + + /* Make room for a back-pointer to 'skb'. */ + skb_reserve(skb, sizeof(*skb_ptr)); + + /* Make sure we are aligned. */ + skb_reserve(skb, -(long)skb->data & (align - 1)); + + /* This address is given to IPP. */ + va = skb->data; + + if (small) + break; + + /* ISSUE: This has never been observed! */ + /* Large buffers must not span a huge page. */ + if (((((long)va & ~HPAGE_MASK) + 1535) & HPAGE_MASK) == 0) + break; + pr_err("Leaking unaligned linux buffer at %p.\n", va); + } + + /* Skip two bytes to satisfy LIPP assumptions. */ + /* Note that this aligns IP on a 16 byte boundary. */ + /* ISSUE: Do this when the packet arrives? */ + skb_reserve(skb, NET_IP_ALIGN); + + /* Save a back-pointer to 'skb'. */ + skb_ptr = va - sizeof(*skb_ptr); + *skb_ptr = skb; + + /* Invalidate the packet buffer. */ + if (!hash_default) + __inv_buffer(skb->data, buffer_size); + + /* Make sure "skb_ptr" has been flushed. */ + __insn_mf(); + +#ifdef TILE_NET_PARANOIA +#if CHIP_HAS_CBOX_HOME_MAP() + if (hash_default) { + HV_PTE pte = *virt_to_pte(current->mm, (unsigned long)va); + if (hv_pte_get_mode(pte) != HV_PTE_MODE_CACHE_HASH_L3) + panic("Non-coherent ingress buffer!"); + } +#endif +#endif + + /* Provide the new buffer. */ + tile_net_provide_linux_buffer(info, va, small); + + return true; +} + + +/* + * Provide linux buffers for LIPP. + */ +static void tile_net_provide_needed_buffers(struct tile_net_cpu *info) +{ + while (info->num_needed_small_buffers != 0) { + if (!tile_net_provide_needed_buffer(info, true)) + goto oops; + info->num_needed_small_buffers--; + } + + while (info->num_needed_large_buffers != 0) { + if (!tile_net_provide_needed_buffer(info, false)) + goto oops; + info->num_needed_large_buffers--; + } + + return; + +oops: + + /* Add a description to the page allocation failure dump. */ + pr_notice("Could not provide a linux buffer to LIPP.\n"); +} + + +/* + * Grab some LEPP completions, and store them in "comps", of size + * "comps_size", and return the number of completions which were + * stored, so the caller can free them. + * + * If "pending" is not NULL, it will be set to true if there might + * still be some pending completions caused by this tile, else false. + */ +static unsigned int tile_net_lepp_grab_comps(struct net_device *dev, + struct sk_buff *comps[], + unsigned int comps_size, + bool *pending) +{ + struct tile_net_priv *priv = netdev_priv(dev); + + lepp_queue_t *eq = priv->epp_queue; + + unsigned int n = 0; + + unsigned int comp_head; + unsigned int comp_busy; + unsigned int comp_tail; + + spin_lock(&priv->comp_lock); + + comp_head = eq->comp_head; + comp_busy = eq->comp_busy; + comp_tail = eq->comp_tail; + + while (comp_head != comp_busy && n < comps_size) { + comps[n++] = eq->comps[comp_head]; + LEPP_QINC(comp_head); + } + + if (pending != NULL) + *pending = (comp_head != comp_tail); + + eq->comp_head = comp_head; + + spin_unlock(&priv->comp_lock); + + return n; +} + + +/* + * Make sure the egress timer is scheduled. + * + * Note that we use "schedule if not scheduled" logic instead of the more + * obvious "reschedule" logic, because "reschedule" is fairly expensive. + */ +static void tile_net_schedule_egress_timer(struct tile_net_cpu *info) +{ + if (!info->egress_timer_scheduled) { + mod_timer_pinned(&info->egress_timer, jiffies + 1); + info->egress_timer_scheduled = true; + } +} + + +/* + * The "function" for "info->egress_timer". + * + * This timer will reschedule itself as long as there are any pending + * completions expected (on behalf of any tile). + * + * ISSUE: Realistically, will the timer ever stop scheduling itself? + * + * ISSUE: This timer is almost never actually needed, so just use a global + * timer that can run on any tile. + * + * ISSUE: Maybe instead track number of expected completions, and free + * only that many, resetting to zero if "pending" is ever false. + */ +static void tile_net_handle_egress_timer(unsigned long arg) +{ + struct tile_net_cpu *info = (struct tile_net_cpu *)arg; + struct net_device *dev = info->napi.dev; + + struct sk_buff *olds[32]; + unsigned int wanted = 32; + unsigned int i, nolds = 0; + bool pending; + + /* The timer is no longer scheduled. */ + info->egress_timer_scheduled = false; + + nolds = tile_net_lepp_grab_comps(dev, olds, wanted, &pending); + + for (i = 0; i < nolds; i++) + kfree_skb(olds[i]); + + /* Reschedule timer if needed. */ + if (pending) + tile_net_schedule_egress_timer(info); +} + + +#ifdef IGNORE_DUP_ACKS + +/* + * Help detect "duplicate" ACKs. These are sequential packets (for a + * given flow) which are exactly 66 bytes long, sharing everything but + * ID=2@0x12, Hsum=2@0x18, Ack=4@0x2a, WinSize=2@0x30, Csum=2@0x32, + * Tstamps=10@0x38. The ID's are +1, the Hsum's are -1, the Ack's are + * +N, and the Tstamps are usually identical. + * + * NOTE: Apparently truly duplicate acks (with identical "ack" values), + * should not be collapsed, as they are used for some kind of flow control. + */ +static bool is_dup_ack(char *s1, char *s2, unsigned int len) +{ + int i; + + unsigned long long ignorable = 0; + + /* Identification. */ + ignorable |= (1ULL << 0x12); + ignorable |= (1ULL << 0x13); + + /* Header checksum. */ + ignorable |= (1ULL << 0x18); + ignorable |= (1ULL << 0x19); + + /* ACK. */ + ignorable |= (1ULL << 0x2a); + ignorable |= (1ULL << 0x2b); + ignorable |= (1ULL << 0x2c); + ignorable |= (1ULL << 0x2d); + + /* WinSize. */ + ignorable |= (1ULL << 0x30); + ignorable |= (1ULL << 0x31); + + /* Checksum. */ + ignorable |= (1ULL << 0x32); + ignorable |= (1ULL << 0x33); + + for (i = 0; i < len; i++, ignorable >>= 1) { + + if ((ignorable & 1) || (s1[i] == s2[i])) + continue; + +#ifdef TILE_NET_DEBUG + /* HACK: Mention non-timestamp diffs. */ + if (i < 0x38 && i != 0x2f && + net_ratelimit()) + pr_info("Diff at 0x%x\n", i); +#endif + + return false; + } + +#ifdef TILE_NET_NO_SUPPRESS_DUP_ACKS + /* HACK: Do not suppress truly duplicate ACKs. */ + /* ISSUE: Is this actually necessary or helpful? */ + if (s1[0x2a] == s2[0x2a] && + s1[0x2b] == s2[0x2b] && + s1[0x2c] == s2[0x2c] && + s1[0x2d] == s2[0x2d]) { + return false; + } +#endif + + return true; +} + +#endif + + + +/* + * Like "tile_net_handle_packets()", but just discard packets. + */ +static void tile_net_discard_packets(struct net_device *dev) +{ + struct tile_net_priv *priv = netdev_priv(dev); + int my_cpu = smp_processor_id(); + struct tile_net_cpu *info = priv->cpu[my_cpu]; + struct tile_netio_queue *queue = &info->queue; + netio_queue_impl_t *qsp = queue->__system_part; + netio_queue_user_impl_t *qup = &queue->__user_part; + + while (qup->__packet_receive_read != + qsp->__packet_receive_queue.__packet_write) { + + int index = qup->__packet_receive_read; + + int index2_aux = index + sizeof(netio_pkt_t); + int index2 = + ((index2_aux == + qsp->__packet_receive_queue.__last_packet_plus_one) ? + 0 : index2_aux); + + netio_pkt_t *pkt = (netio_pkt_t *) + ((unsigned long) &qsp[1] + index); + + /* Extract the "linux_buffer_t". */ + unsigned int buffer = pkt->__packet.word; + + /* Convert "linux_buffer_t" to "va". */ + void *va = __va((phys_addr_t)(buffer >> 1) << 7); + + /* Acquire the associated "skb". */ + struct sk_buff **skb_ptr = va - sizeof(*skb_ptr); + struct sk_buff *skb = *skb_ptr; + + kfree_skb(skb); + + /* Consume this packet. */ + qup->__packet_receive_read = index2; + } +} + + +/* + * Handle the next packet. Return true if "processed", false if "filtered". + */ +static bool tile_net_poll_aux(struct tile_net_cpu *info, int index) +{ + struct net_device *dev = info->napi.dev; + + struct tile_netio_queue *queue = &info->queue; + netio_queue_impl_t *qsp = queue->__system_part; + netio_queue_user_impl_t *qup = &queue->__user_part; + struct tile_net_stats_t *stats = &info->stats; + + int filter; + + int index2_aux = index + sizeof(netio_pkt_t); + int index2 = + ((index2_aux == + qsp->__packet_receive_queue.__last_packet_plus_one) ? + 0 : index2_aux); + + netio_pkt_t *pkt = (netio_pkt_t *)((unsigned long) &qsp[1] + index); + + netio_pkt_metadata_t *metadata = NETIO_PKT_METADATA(pkt); + + /* Extract the packet size. */ + unsigned long len = + (NETIO_PKT_CUSTOM_LENGTH(pkt) + + NET_IP_ALIGN - NETIO_PACKET_PADDING); + + /* Extract the "linux_buffer_t". */ + unsigned int buffer = pkt->__packet.word; + + /* Extract "small" (vs "large"). */ + bool small = ((buffer & 1) != 0); + + /* Convert "linux_buffer_t" to "va". */ + void *va = __va((phys_addr_t)(buffer >> 1) << 7); + + /* Extract the packet data pointer. */ + /* Compare to "NETIO_PKT_CUSTOM_DATA(pkt)". */ + unsigned char *buf = va + NET_IP_ALIGN; + +#ifdef IGNORE_DUP_ACKS + + static int other; + static int final; + static int keep; + static int skip; + +#endif + + /* Invalidate the packet buffer. */ + if (!hash_default) + __inv_buffer(buf, len); + + /* ISSUE: Is this needed? */ + dev->last_rx = jiffies; + +#ifdef TILE_NET_DUMP_PACKETS + dump_packet(buf, len, "rx"); +#endif /* TILE_NET_DUMP_PACKETS */ + +#ifdef TILE_NET_VERIFY_INGRESS + if (!NETIO_PKT_L4_CSUM_CORRECT_M(metadata, pkt) && + NETIO_PKT_L4_CSUM_CALCULATED_M(metadata, pkt)) { + /* + * FIXME: This complains about UDP packets + * with a "zero" checksum (bug 6624). + */ +#ifdef TILE_NET_PANIC_ON_BAD + dump_packet(buf, len, "rx"); + panic("Bad L4 checksum."); +#else + pr_warning("Bad L4 checksum on %d byte packet.\n", len); +#endif + } + if (!NETIO_PKT_L3_CSUM_CORRECT_M(metadata, pkt) && + NETIO_PKT_L3_CSUM_CALCULATED_M(metadata, pkt)) { + dump_packet(buf, len, "rx"); + panic("Bad L3 checksum."); + } + switch (NETIO_PKT_STATUS_M(metadata, pkt)) { + case NETIO_PKT_STATUS_OVERSIZE: + if (len >= 64) { + dump_packet(buf, len, "rx"); + panic("Unexpected OVERSIZE."); + } + break; + case NETIO_PKT_STATUS_BAD: +#ifdef TILE_NET_PANIC_ON_BAD + dump_packet(buf, len, "rx"); + panic("Unexpected BAD packet."); +#else + pr_warning("Unexpected BAD %d byte packet.\n", len); +#endif + } +#endif + + filter = 0; + + if (!(dev->flags & IFF_UP)) { + /* Filter packets received before we're up. */ + filter = 1; + } else if (!(dev->flags & IFF_PROMISC)) { + /* + * FIXME: Implement HW multicast filter. + */ + if (!IS_MULTICAST(buf) && !IS_BROADCAST(buf)) { + /* Filter packets not for our address. */ + const u8 *mine = dev->dev_addr; + filter = compare_ether_addr(mine, buf); + } + } + +#ifdef IGNORE_DUP_ACKS + + if (len != 66) { + /* FIXME: Must check "is_tcp_ack(buf, len)" somehow. */ + + other++; + + } else if (index2 == + qsp->__packet_receive_queue.__packet_write) { + + final++; + + } else { + + netio_pkt_t *pkt2 = (netio_pkt_t *) + ((unsigned long) &qsp[1] + index2); + + netio_pkt_metadata_t *metadata2 = + NETIO_PKT_METADATA(pkt2); + + /* Extract the packet size. */ + unsigned long len2 = + (NETIO_PKT_CUSTOM_LENGTH(pkt2) + + NET_IP_ALIGN - NETIO_PACKET_PADDING); + + if (len2 == 66 && + NETIO_PKT_FLOW_HASH_M(metadata, pkt) == + NETIO_PKT_FLOW_HASH_M(metadata2, pkt2)) { + + /* Extract the "linux_buffer_t". */ + unsigned int buffer2 = pkt2->__packet.word; + + /* Convert "linux_buffer_t" to "va". */ + void *va2 = + __va((phys_addr_t)(buffer2 >> 1) << 7); + + /* Extract the packet data pointer. */ + /* Compare to "NETIO_PKT_CUSTOM_DATA(pkt)". */ + unsigned char *buf2 = va2 + NET_IP_ALIGN; + + /* Invalidate the packet buffer. */ + if (!hash_default) + __inv_buffer(buf2, len2); + + if (is_dup_ack(buf, buf2, len)) { + skip++; + filter = 1; + } else { + keep++; + } + } + } + + if (net_ratelimit()) + pr_info("Other %d Final %d Keep %d Skip %d.\n", + other, final, keep, skip); + +#endif + + if (filter) { + + /* ISSUE: Update "drop" statistics? */ + + tile_net_provide_linux_buffer(info, va, small); + + } else { + + /* Acquire the associated "skb". */ + struct sk_buff **skb_ptr = va - sizeof(*skb_ptr); + struct sk_buff *skb = *skb_ptr; + + /* Paranoia. */ + if (skb->data != buf) + panic("Corrupt linux buffer from LIPP! " + "VA=%p, skb=%p, skb->data=%p\n", + va, skb, skb->data); + + /* Encode the actual packet length. */ + skb_put(skb, len); + + /* NOTE: This call also sets "skb->dev = dev". */ + skb->protocol = eth_type_trans(skb, dev); + + /* ISSUE: Discard corrupt packets? */ + /* ISSUE: Discard packets with bad checksums? */ + + /* Avoid recomputing TCP/UDP checksums. */ + if (NETIO_PKT_L4_CSUM_CORRECT_M(metadata, pkt)) + skb->ip_summed = CHECKSUM_UNNECESSARY; + + netif_receive_skb(skb); + + stats->rx_packets++; + stats->rx_bytes += len; + + if (small) + info->num_needed_small_buffers++; + else + info->num_needed_large_buffers++; + } + + /* Return four credits after every fourth packet. */ + if (--qup->__receive_credit_remaining == 0) { + u32 interval = qup->__receive_credit_interval; + qup->__receive_credit_remaining = interval; + __netio_fastio_return_credits(qup->__fastio_index, interval); + } + + /* Consume this packet. */ + qup->__packet_receive_read = index2; + + return !filter; +} + + +/* + * Handle some packets for the given device on the current CPU. + * + * ISSUE: The "rotting packet" race condition occurs if a packet + * arrives after the queue appears to be empty, and before the + * hypervisor interrupt is re-enabled. + */ +static int tile_net_poll(struct napi_struct *napi, int budget) +{ + struct net_device *dev = napi->dev; + struct tile_net_priv *priv = netdev_priv(dev); + int my_cpu = smp_processor_id(); + struct tile_net_cpu *info = priv->cpu[my_cpu]; + struct tile_netio_queue *queue = &info->queue; + netio_queue_impl_t *qsp = queue->__system_part; + netio_queue_user_impl_t *qup = &queue->__user_part; + + unsigned int work = 0; + + while (1) { + int index = qup->__packet_receive_read; + if (index == qsp->__packet_receive_queue.__packet_write) + break; + + if (tile_net_poll_aux(info, index)) { + if (++work >= budget) + goto done; + } + } + + napi_complete(&info->napi); + + /* Re-enable hypervisor interrupts. */ + enable_percpu_irq(priv->intr_id); + + /* HACK: Avoid the "rotting packet" problem. */ + if (qup->__packet_receive_read != + qsp->__packet_receive_queue.__packet_write) + napi_schedule(&info->napi); + + /* ISSUE: Handle completions? */ + +done: + + tile_net_provide_needed_buffers(info); + + return work; +} + + +/* + * Handle an ingress interrupt for the given device on the current cpu. + */ +static irqreturn_t tile_net_handle_ingress_interrupt(int irq, void *dev_ptr) +{ + struct net_device *dev = (struct net_device *)dev_ptr; + struct tile_net_priv *priv = netdev_priv(dev); + int my_cpu = smp_processor_id(); + struct tile_net_cpu *info = priv->cpu[my_cpu]; + + /* Disable hypervisor interrupt. */ + disable_percpu_irq(priv->intr_id); + + napi_schedule(&info->napi); + + return IRQ_HANDLED; +} + + +/* + * One time initialization per interface. + */ +static int tile_net_open_aux(struct net_device *dev) +{ + struct tile_net_priv *priv = netdev_priv(dev); + + int ret; + int dummy; + unsigned int epp_lotar; + + /* + * Find out where EPP memory should be homed. + */ + ret = hv_dev_pread(priv->hv_devhdl, 0, + (HV_VirtAddr)&epp_lotar, sizeof(epp_lotar), + NETIO_EPP_SHM_OFF); + if (ret < 0) { + pr_err("could not read epp_shm_queue lotar.\n"); + return -EIO; + } + + /* + * Home the page on the EPP. + */ + { + int epp_home = hv_lotar_to_cpu(epp_lotar); + struct page *page = virt_to_page(priv->epp_queue); + homecache_change_page_home(page, 0, epp_home); + } + + /* + * Register the EPP shared memory queue. + */ + { + netio_ipp_address_t ea = { + .va = 0, + .pa = __pa(priv->epp_queue), + .pte = hv_pte(0), + .size = PAGE_SIZE, + }; + ea.pte = hv_pte_set_lotar(ea.pte, epp_lotar); + ea.pte = hv_pte_set_mode(ea.pte, HV_PTE_MODE_CACHE_TILE_L3); + ret = hv_dev_pwrite(priv->hv_devhdl, 0, + (HV_VirtAddr)&ea, + sizeof(ea), + NETIO_EPP_SHM_OFF); + if (ret < 0) + return -EIO; + } + + /* + * Start LIPP/LEPP. + */ + if (hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy, + sizeof(dummy), NETIO_IPP_START_SHIM_OFF) < 0) { + pr_warning("Failed to start LIPP/LEPP.\n"); + return -EIO; + } + + return 0; +} + + +/* + * Register with hypervisor on each CPU. + * + * Strangely, this function does important things even if it "fails", + * which is especially common if the link is not up yet. Hopefully + * these things are all "harmless" if done twice! + */ +static void tile_net_register(void *dev_ptr) +{ + struct net_device *dev = (struct net_device *)dev_ptr; + struct tile_net_priv *priv = netdev_priv(dev); + int my_cpu = smp_processor_id(); + struct tile_net_cpu *info; + + struct tile_netio_queue *queue; + + /* Only network cpus can receive packets. */ + int queue_id = + cpumask_test_cpu(my_cpu, &priv->network_cpus_map) ? 0 : 255; + + netio_input_config_t config = { + .flags = 0, + .num_receive_packets = priv->network_cpus_credits, + .queue_id = queue_id + }; + + int ret = 0; + netio_queue_impl_t *queuep; + + PDEBUG("tile_net_register(queue_id %d)\n", queue_id); + + if (!strcmp(dev->name, "xgbe0")) + info = &__get_cpu_var(hv_xgbe0); + else if (!strcmp(dev->name, "xgbe1")) + info = &__get_cpu_var(hv_xgbe1); + else if (!strcmp(dev->name, "gbe0")) + info = &__get_cpu_var(hv_gbe0); + else if (!strcmp(dev->name, "gbe1")) + info = &__get_cpu_var(hv_gbe1); + else + BUG(); + + /* Initialize the egress timer. */ + init_timer(&info->egress_timer); + info->egress_timer.data = (long)info; + info->egress_timer.function = tile_net_handle_egress_timer; + + priv->cpu[my_cpu] = info; + + /* + * Register ourselves with the IPP. + */ + ret = hv_dev_pwrite(priv->hv_devhdl, 0, + (HV_VirtAddr)&config, + sizeof(netio_input_config_t), + NETIO_IPP_INPUT_REGISTER_OFF); + PDEBUG("hv_dev_pwrite(NETIO_IPP_INPUT_REGISTER_OFF) returned %d\n", + ret); + if (ret < 0) { + printk(KERN_DEBUG "hv_dev_pwrite NETIO_IPP_INPUT_REGISTER_OFF" + " failure %d\n", ret); + info->link_down = (ret == NETIO_LINK_DOWN); + return; + } + + /* + * Get the pointer to our queue's system part. + */ + + ret = hv_dev_pread(priv->hv_devhdl, 0, + (HV_VirtAddr)&queuep, + sizeof(netio_queue_impl_t *), + NETIO_IPP_INPUT_REGISTER_OFF); + PDEBUG("hv_dev_pread(NETIO_IPP_INPUT_REGISTER_OFF) returned %d\n", + ret); + PDEBUG("queuep %p\n", queuep); + if (ret <= 0) { + /* ISSUE: Shouldn't this be a fatal error? */ + pr_err("hv_dev_pread NETIO_IPP_INPUT_REGISTER_OFF failure\n"); + return; + } + + queue = &info->queue; + + queue->__system_part = queuep; + + memset(&queue->__user_part, 0, sizeof(netio_queue_user_impl_t)); + + /* This is traditionally "config.num_receive_packets / 2". */ + queue->__user_part.__receive_credit_interval = 4; + queue->__user_part.__receive_credit_remaining = + queue->__user_part.__receive_credit_interval; + + /* + * Get a fastio index from the hypervisor. + * ISSUE: Shouldn't this check the result? + */ + ret = hv_dev_pread(priv->hv_devhdl, 0, + (HV_VirtAddr)&queue->__user_part.__fastio_index, + sizeof(queue->__user_part.__fastio_index), + NETIO_IPP_GET_FASTIO_OFF); + PDEBUG("hv_dev_pread(NETIO_IPP_GET_FASTIO_OFF) returned %d\n", ret); + + netif_napi_add(dev, &info->napi, tile_net_poll, 64); + + /* Now we are registered. */ + info->registered = true; +} + + +/* + * Unregister with hypervisor on each CPU. + */ +static void tile_net_unregister(void *dev_ptr) +{ + struct net_device *dev = (struct net_device *)dev_ptr; + struct tile_net_priv *priv = netdev_priv(dev); + int my_cpu = smp_processor_id(); + struct tile_net_cpu *info = priv->cpu[my_cpu]; + + int ret = 0; + int dummy = 0; + + /* Do nothing if never registered. */ + if (info == NULL) + return; + + /* Do nothing if already unregistered. */ + if (!info->registered) + return; + + /* + * Unregister ourselves with LIPP. + */ + ret = hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy, + sizeof(dummy), NETIO_IPP_INPUT_UNREGISTER_OFF); + PDEBUG("hv_dev_pwrite(NETIO_IPP_INPUT_UNREGISTER_OFF) returned %d\n", + ret); + if (ret < 0) { + /* FIXME: Just panic? */ + pr_err("hv_dev_pwrite NETIO_IPP_INPUT_UNREGISTER_OFF" + " failure %d\n", ret); + } + + /* + * Discard all packets still in our NetIO queue. Hopefully, + * once the unregister call is complete, there will be no + * packets still in flight on the IDN. + */ + tile_net_discard_packets(dev); + + /* Reset state. */ + info->num_needed_small_buffers = 0; + info->num_needed_large_buffers = 0; + + /* Cancel egress timer. */ + del_timer(&info->egress_timer); + info->egress_timer_scheduled = false; + + netif_napi_del(&info->napi); + + /* Now we are unregistered. */ + info->registered = false; +} + + +/* + * Helper function for "tile_net_stop()". + * + * Also used to handle registration failure in "tile_net_open_inner()", + * when "fully_opened" is known to be false, and the various extra + * steps in "tile_net_stop()" are not necessary. ISSUE: It might be + * simpler if we could just call "tile_net_stop()" anyway. + */ +static void tile_net_stop_aux(struct net_device *dev) +{ + struct tile_net_priv *priv = netdev_priv(dev); + + int dummy = 0; + + /* Unregister all tiles, so LIPP will stop delivering packets. */ + on_each_cpu(tile_net_unregister, (void *)dev, 1); + + /* Stop LIPP/LEPP. */ + if (hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy, + sizeof(dummy), NETIO_IPP_STOP_SHIM_OFF) < 0) + panic("Failed to stop LIPP/LEPP!\n"); + + priv->partly_opened = 0; +} + + +/* + * Disable ingress interrupts for the given device on the current cpu. + */ +static void tile_net_disable_intr(void *dev_ptr) +{ + struct net_device *dev = (struct net_device *)dev_ptr; + struct tile_net_priv *priv = netdev_priv(dev); + int my_cpu = smp_processor_id(); + struct tile_net_cpu *info = priv->cpu[my_cpu]; + + /* Disable hypervisor interrupt. */ + disable_percpu_irq(priv->intr_id); + + /* Disable NAPI if needed. */ + if (info != NULL && info->napi_enabled) { + napi_disable(&info->napi); + info->napi_enabled = false; + } +} + + +/* + * Enable ingress interrupts for the given device on the current cpu. + */ +static void tile_net_enable_intr(void *dev_ptr) +{ + struct net_device *dev = (struct net_device *)dev_ptr; + struct tile_net_priv *priv = netdev_priv(dev); + int my_cpu = smp_processor_id(); + struct tile_net_cpu *info = priv->cpu[my_cpu]; + + /* Enable hypervisor interrupt. */ + enable_percpu_irq(priv->intr_id); + + /* Enable NAPI. */ + napi_enable(&info->napi); + info->napi_enabled = true; +} + + +/* + * tile_net_open_inner does most of the work of bringing up the interface. + * It's called from tile_net_open(), and also from tile_net_retry_open(). + * The return value is 0 if the interface was brought up, < 0 if + * tile_net_open() should return the return value as an error, and > 0 if + * tile_net_open() should return success and schedule a work item to + * periodically retry the bringup. + */ +static int tile_net_open_inner(struct net_device *dev) +{ + struct tile_net_priv *priv = netdev_priv(dev); + int my_cpu = smp_processor_id(); + struct tile_net_cpu *info; + struct tile_netio_queue *queue; + unsigned int irq; + int i; + + /* + * First try to register just on the local CPU, and handle any + * semi-expected "link down" failure specially. Note that we + * do NOT call "tile_net_stop_aux()", unlike below. + */ + tile_net_register(dev); + info = priv->cpu[my_cpu]; + if (!info->registered) { + if (info->link_down) + return 1; + return -EAGAIN; + } + + /* + * Now register everywhere else. If any registration fails, + * even for "link down" (which might not be possible), we + * clean up using "tile_net_stop_aux()". + */ + smp_call_function(tile_net_register, (void *)dev, 1); + for_each_online_cpu(i) { + if (!priv->cpu[i]->registered) { + tile_net_stop_aux(dev); + return -EAGAIN; + } + } + + queue = &info->queue; + + /* + * Set the device intr bit mask. + * The tile_net_register above sets per tile __intr_id. + */ + priv->intr_id = queue->__system_part->__intr_id; + BUG_ON(!priv->intr_id); + + /* + * Register the device interrupt handler. + * The __ffs() function returns the index into the interrupt handler + * table from the interrupt bit mask which should have one bit + * and one bit only set. + */ + irq = __ffs(priv->intr_id); + tile_irq_activate(irq, TILE_IRQ_PERCPU); + BUG_ON(request_irq(irq, tile_net_handle_ingress_interrupt, + 0, dev->name, (void *)dev) != 0); + + /* ISSUE: How could "priv->fully_opened" ever be "true" here? */ + + if (!priv->fully_opened) { + + int dummy = 0; + + /* Allocate initial buffers. */ + + int max_buffers = + priv->network_cpus_count * priv->network_cpus_credits; + + info->num_needed_small_buffers = + min(LIPP_SMALL_BUFFERS, max_buffers); + + info->num_needed_large_buffers = + min(LIPP_LARGE_BUFFERS, max_buffers); + + tile_net_provide_needed_buffers(info); + + if (info->num_needed_small_buffers != 0 || + info->num_needed_large_buffers != 0) + panic("Insufficient memory for buffer stack!"); + + /* Start LIPP/LEPP and activate "ingress" at the shim. */ + if (hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy, + sizeof(dummy), NETIO_IPP_INPUT_INIT_OFF) < 0) + panic("Failed to activate the LIPP Shim!\n"); + + priv->fully_opened = 1; + } + + /* On each tile, enable the hypervisor to trigger interrupts. */ + /* ISSUE: Do this before starting LIPP/LEPP? */ + on_each_cpu(tile_net_enable_intr, (void *)dev, 1); + + /* Start our transmit queue. */ + netif_start_queue(dev); + + return 0; +} + + +/* + * Called periodically to retry bringing up the NetIO interface, + * if it doesn't come up cleanly during tile_net_open(). + */ +static void tile_net_open_retry(struct work_struct *w) +{ + struct delayed_work *dw = + container_of(w, struct delayed_work, work); + + struct tile_net_priv *priv = + container_of(dw, struct tile_net_priv, retry_work); + + /* + * Try to bring the NetIO interface up. If it fails, reschedule + * ourselves to try again later; otherwise, tell Linux we now have + * a working link. ISSUE: What if the return value is negative? + */ + if (tile_net_open_inner(priv->dev)) + schedule_delayed_work_on(singlethread_cpu, &priv->retry_work, + TILE_NET_RETRY_INTERVAL); + else + netif_carrier_on(priv->dev); +} + + +/* + * Called when a network interface is made active. + * + * Returns 0 on success, negative value on failure. + * + * The open entry point is called when a network interface is made + * active by the system (IFF_UP). At this point all resources needed + * for transmit and receive operations are allocated, the interrupt + * handler is registered with the OS, the watchdog timer is started, + * and the stack is notified that the interface is ready. + * + * If the actual link is not available yet, then we tell Linux that + * we have no carrier, and we keep checking until the link comes up. + */ +static int tile_net_open(struct net_device *dev) +{ + int ret = 0; + struct tile_net_priv *priv = netdev_priv(dev); + + /* + * We rely on priv->partly_opened to tell us if this is the + * first time this interface is being brought up. If it is + * set, the IPP was already initialized and should not be + * initialized again. + */ + if (!priv->partly_opened) { + + int count; + int credits; + + /* Initialize LIPP/LEPP, and start the Shim. */ + ret = tile_net_open_aux(dev); + if (ret < 0) { + pr_err("tile_net_open_aux failed: %d\n", ret); + return ret; + } + + /* Analyze the network cpus. */ + + if (network_cpus_used) + cpumask_copy(&priv->network_cpus_map, + &network_cpus_map); + else + cpumask_copy(&priv->network_cpus_map, cpu_online_mask); + + + count = cpumask_weight(&priv->network_cpus_map); + + /* Limit credits to available buffers, and apply min. */ + credits = max(16, (LIPP_LARGE_BUFFERS / count) & ~1); + + /* Apply "GBE" max limit. */ + /* ISSUE: Use higher limit for XGBE? */ + credits = min(NETIO_MAX_RECEIVE_PKTS, credits); + + priv->network_cpus_count = count; + priv->network_cpus_credits = credits; + +#ifdef TILE_NET_DEBUG + pr_info("Using %d network cpus, with %d credits each\n", + priv->network_cpus_count, priv->network_cpus_credits); +#endif + + priv->partly_opened = 1; + } + + /* + * Attempt to bring up the link. + */ + ret = tile_net_open_inner(dev); + if (ret <= 0) { + if (ret == 0) + netif_carrier_on(dev); + return ret; + } + + /* + * We were unable to bring up the NetIO interface, but we want to + * try again in a little bit. Tell Linux that we have no carrier + * so it doesn't try to use the interface before the link comes up + * and then remember to try again later. + */ + netif_carrier_off(dev); + schedule_delayed_work_on(singlethread_cpu, &priv->retry_work, + TILE_NET_RETRY_INTERVAL); + + return 0; +} + + +/* + * Disables a network interface. + * + * Returns 0, this is not allowed to fail. + * + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the drivers control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. + * + * ISSUE: Can this can be called while "tile_net_poll()" is running? + */ +static int tile_net_stop(struct net_device *dev) +{ + struct tile_net_priv *priv = netdev_priv(dev); + + bool pending = true; + + PDEBUG("tile_net_stop()\n"); + + /* ISSUE: Only needed if not yet fully open. */ + cancel_delayed_work_sync(&priv->retry_work); + + /* Can't transmit any more. */ + netif_stop_queue(dev); + + /* + * Disable hypervisor interrupts on each tile. + */ + on_each_cpu(tile_net_disable_intr, (void *)dev, 1); + + /* + * Unregister the interrupt handler. + * The __ffs() function returns the index into the interrupt handler + * table from the interrupt bit mask which should have one bit + * and one bit only set. + */ + if (priv->intr_id) + free_irq(__ffs(priv->intr_id), dev); + + /* + * Drain all the LIPP buffers. + */ + + while (true) { + int buffer; + + /* NOTE: This should never fail. */ + if (hv_dev_pread(priv->hv_devhdl, 0, (HV_VirtAddr)&buffer, + sizeof(buffer), NETIO_IPP_DRAIN_OFF) < 0) + break; + + /* Stop when done. */ + if (buffer == 0) + break; + + { + /* Convert "linux_buffer_t" to "va". */ + void *va = __va((phys_addr_t)(buffer >> 1) << 7); + + /* Acquire the associated "skb". */ + struct sk_buff **skb_ptr = va - sizeof(*skb_ptr); + struct sk_buff *skb = *skb_ptr; + + kfree_skb(skb); + } + } + + /* Stop LIPP/LEPP. */ + tile_net_stop_aux(dev); + + + priv->fully_opened = 0; + + + /* + * XXX: ISSUE: It appears that, in practice anyway, by the + * time we get here, there are no pending completions. + */ + while (pending) { + + struct sk_buff *olds[32]; + unsigned int wanted = 32; + unsigned int i, nolds = 0; + + nolds = tile_net_lepp_grab_comps(dev, olds, + wanted, &pending); + + /* ISSUE: We have never actually seen this debug spew. */ + if (nolds != 0) + pr_info("During tile_net_stop(), grabbed %d comps.\n", + nolds); + + for (i = 0; i < nolds; i++) + kfree_skb(olds[i]); + } + + + /* Wipe the EPP queue. */ + memset(priv->epp_queue, 0, sizeof(lepp_queue_t)); + + /* Evict the EPP queue. */ + finv_buffer(priv->epp_queue, PAGE_SIZE); + + return 0; +} + + +/* + * Prepare the "frags" info for the resulting LEPP command. + * + * If needed, flush the memory used by the frags. + */ +static unsigned int tile_net_tx_frags(lepp_frag_t *frags, + struct sk_buff *skb, + void *b_data, unsigned int b_len) +{ + unsigned int i, n = 0; + + struct skb_shared_info *sh = skb_shinfo(skb); + + phys_addr_t cpa; + + if (b_len != 0) { + + if (!hash_default) + finv_buffer_remote(b_data, b_len); + + cpa = __pa(b_data); + frags[n].cpa_lo = cpa; + frags[n].cpa_hi = cpa >> 32; + frags[n].length = b_len; + frags[n].hash_for_home = hash_default; + n++; + } + + for (i = 0; i < sh->nr_frags; i++) { + + skb_frag_t *f = &sh->frags[i]; + unsigned long pfn = page_to_pfn(f->page); + + /* FIXME: Compute "hash_for_home" properly. */ + /* ISSUE: The hypervisor checks CHIP_HAS_REV1_DMA_PACKETS(). */ + int hash_for_home = hash_default; + + /* FIXME: Hmmm. */ + if (!hash_default) { + void *va = pfn_to_kaddr(pfn) + f->page_offset; + BUG_ON(PageHighMem(f->page)); + finv_buffer_remote(va, f->size); + } + + cpa = ((phys_addr_t)pfn << PAGE_SHIFT) + f->page_offset; + frags[n].cpa_lo = cpa; + frags[n].cpa_hi = cpa >> 32; + frags[n].length = f->size; + frags[n].hash_for_home = hash_for_home; + n++; + } + + return n; +} + + +/* + * This function takes "skb", consisting of a header template and a + * payload, and hands it to LEPP, to emit as one or more segments, + * each consisting of a possibly modified header, plus a piece of the + * payload, via a process known as "tcp segmentation offload". + * + * Usually, "data" will contain the header template, of size "sh_len", + * and "sh->frags" will contain "skb->data_len" bytes of payload, and + * there will be "sh->gso_segs" segments. + * + * Sometimes, if "sendfile()" requires copying, we will be called with + * "data" containing the header and payload, with "frags" being empty. + * + * In theory, "sh->nr_frags" could be 3, but in practice, it seems + * that this will never actually happen. + * + * See "emulate_large_send_offload()" for some reference code, which + * does not handle checksumming. + * + * ISSUE: How do we make sure that high memory DMA does not migrate? + */ +static int tile_net_tx_tso(struct sk_buff *skb, struct net_device *dev) +{ + struct tile_net_priv *priv = netdev_priv(dev); + int my_cpu = smp_processor_id(); + struct tile_net_cpu *info = priv->cpu[my_cpu]; + struct tile_net_stats_t *stats = &info->stats; + + struct skb_shared_info *sh = skb_shinfo(skb); + + unsigned char *data = skb->data; + + /* The ip header follows the ethernet header. */ + struct iphdr *ih = ip_hdr(skb); + unsigned int ih_len = ih->ihl * 4; + + /* Note that "nh == ih", by definition. */ + unsigned char *nh = skb_network_header(skb); + unsigned int eh_len = nh - data; + + /* The tcp header follows the ip header. */ + struct tcphdr *th = (struct tcphdr *)(nh + ih_len); + unsigned int th_len = th->doff * 4; + + /* The total number of header bytes. */ + /* NOTE: This may be less than skb_headlen(skb). */ + unsigned int sh_len = eh_len + ih_len + th_len; + + /* The number of payload bytes at "skb->data + sh_len". */ + /* This is non-zero for sendfile() without HIGHDMA. */ + unsigned int b_len = skb_headlen(skb) - sh_len; + + /* The total number of payload bytes. */ + unsigned int d_len = b_len + skb->data_len; + + /* The maximum payload size. */ + unsigned int p_len = sh->gso_size; + + /* The total number of segments. */ + unsigned int num_segs = sh->gso_segs; + + /* The temporary copy of the command. */ + u32 cmd_body[(LEPP_MAX_CMD_SIZE + 3) / 4]; + lepp_tso_cmd_t *cmd = (lepp_tso_cmd_t *)cmd_body; + + /* Analyze the "frags". */ + unsigned int num_frags = + tile_net_tx_frags(cmd->frags, skb, data + sh_len, b_len); + + /* The size of the command, including frags and header. */ + size_t cmd_size = LEPP_TSO_CMD_SIZE(num_frags, sh_len); + + /* The command header. */ + lepp_tso_cmd_t cmd_init = { + .tso = true, + .header_size = sh_len, + .ip_offset = eh_len, + .tcp_offset = eh_len + ih_len, + .payload_size = p_len, + .num_frags = num_frags, + }; + + unsigned long irqflags; + + lepp_queue_t *eq = priv->epp_queue; + + struct sk_buff *olds[4]; + unsigned int wanted = 4; + unsigned int i, nolds = 0; + + unsigned int cmd_head, cmd_tail, cmd_next; + unsigned int comp_tail; + + unsigned int free_slots; + + + /* Paranoia. */ + BUG_ON(skb->protocol != htons(ETH_P_IP)); + BUG_ON(ih->protocol != IPPROTO_TCP); + BUG_ON(skb->ip_summed != CHECKSUM_PARTIAL); + BUG_ON(num_frags > LEPP_MAX_FRAGS); + /*--BUG_ON(num_segs != (d_len + (p_len - 1)) / p_len); */ + BUG_ON(num_segs <= 1); + + + /* Finish preparing the command. */ + + /* Copy the command header. */ + *cmd = cmd_init; + + /* Copy the "header". */ + memcpy(&cmd->frags[num_frags], data, sh_len); + + + /* Prefetch and wait, to minimize time spent holding the spinlock. */ + prefetch_L1(&eq->comp_tail); + prefetch_L1(&eq->cmd_tail); + mb(); + + + /* Enqueue the command. */ + + spin_lock_irqsave(&priv->cmd_lock, irqflags); + + /* + * Handle completions if needed to make room. + * HACK: Spin until there is sufficient room. + */ + free_slots = lepp_num_free_comp_slots(eq); + if (free_slots < 1) { +spin: + nolds += tile_net_lepp_grab_comps(dev, olds + nolds, + wanted - nolds, NULL); + if (lepp_num_free_comp_slots(eq) < 1) + goto spin; + } + + cmd_head = eq->cmd_head; + cmd_tail = eq->cmd_tail; + + /* NOTE: The "gotos" below are untested. */ + + /* Prepare to advance, detecting full queue. */ + cmd_next = cmd_tail + cmd_size; + if (cmd_tail < cmd_head && cmd_next >= cmd_head) + goto spin; + if (cmd_next > LEPP_CMD_LIMIT) { + cmd_next = 0; + if (cmd_next == cmd_head) + goto spin; + } + + /* Copy the command. */ + memcpy(&eq->cmds[cmd_tail], cmd, cmd_size); + + /* Advance. */ + cmd_tail = cmd_next; + + /* Record "skb" for eventual freeing. */ + comp_tail = eq->comp_tail; + eq->comps[comp_tail] = skb; + LEPP_QINC(comp_tail); + eq->comp_tail = comp_tail; + + /* Flush before allowing LEPP to handle the command. */ + __insn_mf(); + + eq->cmd_tail = cmd_tail; + + spin_unlock_irqrestore(&priv->cmd_lock, irqflags); + + if (nolds == 0) + nolds = tile_net_lepp_grab_comps(dev, olds, wanted, NULL); + + /* Handle completions. */ + for (i = 0; i < nolds; i++) + kfree_skb(olds[i]); + + /* Update stats. */ + stats->tx_packets += num_segs; + stats->tx_bytes += (num_segs * sh_len) + d_len; + + /* Make sure the egress timer is scheduled. */ + tile_net_schedule_egress_timer(info); + + return NETDEV_TX_OK; +} + + +/* + * Transmit a packet (called by the kernel via "hard_start_xmit" hook). + */ +static int tile_net_tx(struct sk_buff *skb, struct net_device *dev) +{ + struct tile_net_priv *priv = netdev_priv(dev); + int my_cpu = smp_processor_id(); + struct tile_net_cpu *info = priv->cpu[my_cpu]; + struct tile_net_stats_t *stats = &info->stats; + + unsigned long irqflags; + + struct skb_shared_info *sh = skb_shinfo(skb); + + unsigned int len = skb->len; + unsigned char *data = skb->data; + + unsigned int csum_start = skb->csum_start - skb_headroom(skb); + + lepp_frag_t frags[LEPP_MAX_FRAGS]; + + unsigned int num_frags; + + lepp_queue_t *eq = priv->epp_queue; + + struct sk_buff *olds[4]; + unsigned int wanted = 4; + unsigned int i, nolds = 0; + + unsigned int cmd_size = sizeof(lepp_cmd_t); + + unsigned int cmd_head, cmd_tail, cmd_next; + unsigned int comp_tail; + + lepp_cmd_t cmds[LEPP_MAX_FRAGS]; + + unsigned int free_slots; + + + /* + * This is paranoia, since we think that if the link doesn't come + * up, telling Linux we have no carrier will keep it from trying + * to transmit. If it does, though, we can't execute this routine, + * since data structures we depend on aren't set up yet. + */ + if (!info->registered) + return NETDEV_TX_BUSY; + + + /* Save the timestamp. */ + dev->trans_start = jiffies; + + +#ifdef TILE_NET_PARANOIA +#if CHIP_HAS_CBOX_HOME_MAP() + if (hash_default) { + HV_PTE pte = *virt_to_pte(current->mm, (unsigned long)data); + if (hv_pte_get_mode(pte) != HV_PTE_MODE_CACHE_HASH_L3) + panic("Non-coherent egress buffer!"); + } +#endif +#endif + + +#ifdef TILE_NET_DUMP_PACKETS + /* ISSUE: Does not dump the "frags". */ + dump_packet(data, skb_headlen(skb), "tx"); +#endif /* TILE_NET_DUMP_PACKETS */ + + + if (sh->gso_size != 0) + return tile_net_tx_tso(skb, dev); + + + /* Prepare the commands. */ + + num_frags = tile_net_tx_frags(frags, skb, data, skb_headlen(skb)); + + for (i = 0; i < num_frags; i++) { + + bool final = (i == num_frags - 1); + + lepp_cmd_t cmd = { + .cpa_lo = frags[i].cpa_lo, + .cpa_hi = frags[i].cpa_hi, + .length = frags[i].length, + .hash_for_home = frags[i].hash_for_home, + .send_completion = final, + .end_of_packet = final + }; + + if (i == 0 && skb->ip_summed == CHECKSUM_PARTIAL) { + cmd.compute_checksum = 1; + cmd.checksum_data.bits.start_byte = csum_start; + cmd.checksum_data.bits.count = len - csum_start; + cmd.checksum_data.bits.destination_byte = + csum_start + skb->csum_offset; + } + + cmds[i] = cmd; + } + + + /* Prefetch and wait, to minimize time spent holding the spinlock. */ + prefetch_L1(&eq->comp_tail); + prefetch_L1(&eq->cmd_tail); + mb(); + + + /* Enqueue the commands. */ + + spin_lock_irqsave(&priv->cmd_lock, irqflags); + + /* + * Handle completions if needed to make room. + * HACK: Spin until there is sufficient room. + */ + free_slots = lepp_num_free_comp_slots(eq); + if (free_slots < 1) { +spin: + nolds += tile_net_lepp_grab_comps(dev, olds + nolds, + wanted - nolds, NULL); + if (lepp_num_free_comp_slots(eq) < 1) + goto spin; + } + + cmd_head = eq->cmd_head; + cmd_tail = eq->cmd_tail; + + /* NOTE: The "gotos" below are untested. */ + + /* Copy the commands, or fail. */ + for (i = 0; i < num_frags; i++) { + + /* Prepare to advance, detecting full queue. */ + cmd_next = cmd_tail + cmd_size; + if (cmd_tail < cmd_head && cmd_next >= cmd_head) + goto spin; + if (cmd_next > LEPP_CMD_LIMIT) { + cmd_next = 0; + if (cmd_next == cmd_head) + goto spin; + } + + /* Copy the command. */ + *(lepp_cmd_t *)&eq->cmds[cmd_tail] = cmds[i]; + + /* Advance. */ + cmd_tail = cmd_next; + } + + /* Record "skb" for eventual freeing. */ + comp_tail = eq->comp_tail; + eq->comps[comp_tail] = skb; + LEPP_QINC(comp_tail); + eq->comp_tail = comp_tail; + + /* Flush before allowing LEPP to handle the command. */ + __insn_mf(); + + eq->cmd_tail = cmd_tail; + + spin_unlock_irqrestore(&priv->cmd_lock, irqflags); + + if (nolds == 0) + nolds = tile_net_lepp_grab_comps(dev, olds, wanted, NULL); + + /* Handle completions. */ + for (i = 0; i < nolds; i++) + kfree_skb(olds[i]); + + /* HACK: Track "expanded" size for short packets (e.g. 42 < 60). */ + stats->tx_packets++; + stats->tx_bytes += ((len >= ETH_ZLEN) ? len : ETH_ZLEN); + + /* Make sure the egress timer is scheduled. */ + tile_net_schedule_egress_timer(info); + + return NETDEV_TX_OK; +} + + +/* + * Deal with a transmit timeout. + */ +static void tile_net_tx_timeout(struct net_device *dev) +{ + PDEBUG("tile_net_tx_timeout()\n"); + PDEBUG("Transmit timeout at %ld, latency %ld\n", jiffies, + jiffies - dev->trans_start); + + /* XXX: ISSUE: This doesn't seem useful for us. */ + netif_wake_queue(dev); +} + + +/* + * Ioctl commands. + */ +static int tile_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + return -EOPNOTSUPP; +} + + +/* + * Get System Network Statistics. + * + * Returns the address of the device statistics structure. + */ +static struct net_device_stats *tile_net_get_stats(struct net_device *dev) +{ + struct tile_net_priv *priv = netdev_priv(dev); + u32 rx_packets = 0; + u32 tx_packets = 0; + u32 rx_bytes = 0; + u32 tx_bytes = 0; + int i; + + for_each_online_cpu(i) { + if (priv->cpu[i]) { + rx_packets += priv->cpu[i]->stats.rx_packets; + rx_bytes += priv->cpu[i]->stats.rx_bytes; + tx_packets += priv->cpu[i]->stats.tx_packets; + tx_bytes += priv->cpu[i]->stats.tx_bytes; + } + } + + priv->stats.rx_packets = rx_packets; + priv->stats.rx_bytes = rx_bytes; + priv->stats.tx_packets = tx_packets; + priv->stats.tx_bytes = tx_bytes; + + return &priv->stats; +} + + +/* + * Change the "mtu". + * + * The "change_mtu" method is usually not needed. + * If you need it, it must be like this. + */ +static int tile_net_change_mtu(struct net_device *dev, int new_mtu) +{ + PDEBUG("tile_net_change_mtu()\n"); + + /* Check ranges. */ + if ((new_mtu < 68) || (new_mtu > 1500)) + return -EINVAL; + + /* Accept the value. */ + dev->mtu = new_mtu; + + return 0; +} + + +/* + * Change the Ethernet Address of the NIC. + * + * The hypervisor driver does not support changing MAC address. However, + * the IPP does not do anything with the MAC address, so the address which + * gets used on outgoing packets, and which is accepted on incoming packets, + * is completely up to the NetIO program or kernel driver which is actually + * handling them. + * + * Returns 0 on success, negative on failure. + */ +static int tile_net_set_mac_address(struct net_device *dev, void *p) +{ + struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EINVAL; + + /* ISSUE: Note that "dev_addr" is now a pointer. */ + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + + return 0; +} + + +/* + * Obtain the MAC address from the hypervisor. + * This must be done before opening the device. + */ +static int tile_net_get_mac(struct net_device *dev) +{ + struct tile_net_priv *priv = netdev_priv(dev); + + char hv_dev_name[32]; + int len; + + __netio_getset_offset_t offset = { .word = NETIO_IPP_PARAM_OFF }; + + int ret; + + /* For example, "xgbe0". */ + strcpy(hv_dev_name, dev->name); + len = strlen(hv_dev_name); + + /* For example, "xgbe/0". */ + hv_dev_name[len] = hv_dev_name[len - 1]; + hv_dev_name[len - 1] = '/'; + len++; + + /* For example, "xgbe/0/native_hash". */ + strcpy(hv_dev_name + len, hash_default ? "/native_hash" : "/native"); + + /* Get the hypervisor handle for this device. */ + priv->hv_devhdl = hv_dev_open((HV_VirtAddr)hv_dev_name, 0); + PDEBUG("hv_dev_open(%s) returned %d %p\n", + hv_dev_name, priv->hv_devhdl, &priv->hv_devhdl); + if (priv->hv_devhdl < 0) { + if (priv->hv_devhdl == HV_ENODEV) + printk(KERN_DEBUG "Ignoring unconfigured device %s\n", + hv_dev_name); + else + printk(KERN_DEBUG "hv_dev_open(%s) returned %d\n", + hv_dev_name, priv->hv_devhdl); + return -1; + } + + /* + * Read the hardware address from the hypervisor. + * ISSUE: Note that "dev_addr" is now a pointer. + */ + offset.bits.class = NETIO_PARAM; + offset.bits.addr = NETIO_PARAM_MAC; + ret = hv_dev_pread(priv->hv_devhdl, 0, + (HV_VirtAddr)dev->dev_addr, dev->addr_len, + offset.word); + PDEBUG("hv_dev_pread(NETIO_PARAM_MAC) returned %d\n", ret); + if (ret <= 0) { + printk(KERN_DEBUG "hv_dev_pread(NETIO_PARAM_MAC) %s failed\n", + dev->name); + /* + * Since the device is configured by the hypervisor but we + * can't get its MAC address, we are most likely running + * the simulator, so let's generate a random MAC address. + */ + random_ether_addr(dev->dev_addr); + } + + return 0; +} + + +static struct net_device_ops tile_net_ops = { + .ndo_open = tile_net_open, + .ndo_stop = tile_net_stop, + .ndo_start_xmit = tile_net_tx, + .ndo_do_ioctl = tile_net_ioctl, + .ndo_get_stats = tile_net_get_stats, + .ndo_change_mtu = tile_net_change_mtu, + .ndo_tx_timeout = tile_net_tx_timeout, + .ndo_set_mac_address = tile_net_set_mac_address +}; + + +/* + * The setup function. + * + * This uses ether_setup() to assign various fields in dev, including + * setting IFF_BROADCAST and IFF_MULTICAST, then sets some extra fields. + */ +static void tile_net_setup(struct net_device *dev) +{ + PDEBUG("tile_net_setup()\n"); + + ether_setup(dev); + + dev->netdev_ops = &tile_net_ops; + + dev->watchdog_timeo = TILE_NET_TIMEOUT; + + /* We want lockless xmit. */ + dev->features |= NETIF_F_LLTX; + + /* We support hardware tx checksums. */ + dev->features |= NETIF_F_HW_CSUM; + + /* We support scatter/gather. */ + dev->features |= NETIF_F_SG; + + /* We support TSO. */ + dev->features |= NETIF_F_TSO; + +#ifdef TILE_NET_GSO + /* We support GSO. */ + dev->features |= NETIF_F_GSO; +#endif + + if (hash_default) + dev->features |= NETIF_F_HIGHDMA; + + /* ISSUE: We should support NETIF_F_UFO. */ + + dev->tx_queue_len = TILE_NET_TX_QUEUE_LEN; + + dev->mtu = TILE_NET_MTU; +} + + +/* + * Allocate the device structure, register the device, and obtain the + * MAC address from the hypervisor. + */ +static struct net_device *tile_net_dev_init(const char *name) +{ + int ret; + struct net_device *dev; + struct tile_net_priv *priv; + struct page *page; + + /* + * Allocate the device structure. This allocates "priv", calls + * tile_net_setup(), and saves "name". Normally, "name" is a + * template, instantiated by register_netdev(), but not for us. + */ + dev = alloc_netdev(sizeof(*priv), name, tile_net_setup); + if (!dev) { + pr_err("alloc_netdev(%s) failed\n", name); + return NULL; + } + + priv = netdev_priv(dev); + + /* Initialize "priv". */ + + memset(priv, 0, sizeof(*priv)); + + /* Save "dev" for "tile_net_open_retry()". */ + priv->dev = dev; + + INIT_DELAYED_WORK(&priv->retry_work, tile_net_open_retry); + + spin_lock_init(&priv->cmd_lock); + spin_lock_init(&priv->comp_lock); + + /* Allocate "epp_queue". */ + BUG_ON(get_order(sizeof(lepp_queue_t)) != 0); + page = alloc_pages(GFP_KERNEL | __GFP_ZERO, 0); + if (!page) { + free_netdev(dev); + return NULL; + } + priv->epp_queue = page_address(page); + + /* Register the network device. */ + ret = register_netdev(dev); + if (ret) { + pr_err("register_netdev %s failed %d\n", dev->name, ret); + free_page((unsigned long)priv->epp_queue); + free_netdev(dev); + return NULL; + } + + /* Get the MAC address. */ + ret = tile_net_get_mac(dev); + if (ret < 0) { + unregister_netdev(dev); + free_page((unsigned long)priv->epp_queue); + free_netdev(dev); + return NULL; + } + + return dev; +} + + +/* + * Module cleanup. + */ +static void tile_net_cleanup(void) +{ + int i; + + for (i = 0; i < TILE_NET_DEVS; i++) { + if (tile_net_devs[i]) { + struct net_device *dev = tile_net_devs[i]; + struct tile_net_priv *priv = netdev_priv(dev); + unregister_netdev(dev); + finv_buffer(priv->epp_queue, PAGE_SIZE); + free_page((unsigned long)priv->epp_queue); + free_netdev(dev); + } + } +} + + +/* + * Module initialization. + */ +static int tile_net_init_module(void) +{ + pr_info("Tilera IPP Net Driver\n"); + + tile_net_devs[0] = tile_net_dev_init("xgbe0"); + tile_net_devs[1] = tile_net_dev_init("xgbe1"); + tile_net_devs[2] = tile_net_dev_init("gbe0"); + tile_net_devs[3] = tile_net_dev_init("gbe1"); + + return 0; +} + + +#ifndef MODULE +/* + * The "network_cpus" boot argument specifies the cpus that are dedicated + * to handle ingress packets. + * + * The parameter should be in the form "network_cpus=m-n[,x-y]", where + * m, n, x, y are integer numbers that represent the cpus that can be + * neither a dedicated cpu nor a dataplane cpu. + */ +static int __init network_cpus_setup(char *str) +{ + int rc = cpulist_parse_crop(str, &network_cpus_map); + if (rc != 0) { + pr_warning("network_cpus=%s: malformed cpu list\n", + str); + } else { + + /* Remove dedicated cpus. */ + cpumask_and(&network_cpus_map, &network_cpus_map, + cpu_possible_mask); + + + if (cpumask_empty(&network_cpus_map)) { + pr_warning("Ignoring network_cpus='%s'.\n", + str); + } else { + char buf[1024]; + cpulist_scnprintf(buf, sizeof(buf), &network_cpus_map); + pr_info("Linux network CPUs: %s\n", buf); + network_cpus_used = true; + } + } + + return 0; +} +__setup("network_cpus=", network_cpus_setup); +#endif + + +module_init(tile_net_init_module); +module_exit(tile_net_cleanup); diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index f01e344cf4bd..98e6fdf34d30 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o obj-$(CONFIG_X86_VISWS) += setup-irq.o obj-$(CONFIG_MN10300) += setup-bus.o obj-$(CONFIG_MICROBLAZE) += setup-bus.o +obj-$(CONFIG_TILE) += setup-bus.o setup-irq.o # # ACPI Related PCI FW Functions diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index f5c63fe9db5c..6f9350cabbd5 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2136,6 +2136,24 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, quirk_unhide_mch_dev6); +#ifdef CONFIG_TILE +/* + * The Tilera TILEmpower platform needs to set the link speed + * to 2.5GT(Giga-Transfers)/s (Gen 1). The default link speed + * setting is 5GT/s (Gen 2). 0x98 is the Link Control2 PCIe + * capability register of the PEX8624 PCIe switch. The switch + * supports link speed auto negotiation, but falsely sets + * the link speed to 5GT/s. + */ +static void __devinit quirk_tile_plx_gen1(struct pci_dev *dev) +{ + if (tile_plx_gen1) { + pci_write_config_dword(dev, 0x98, 0x1); + mdelay(50); + } +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1); +#endif /* CONFIG_TILE */ #ifdef CONFIG_PCI_MSI /* Some chipsets do not support MSI. We cannot easily rely on setting diff --git a/drivers/scsi/arm/fas216.h b/drivers/scsi/arm/fas216.h index 377cfb72cc66..f30f8d659dc4 100644 --- a/drivers/scsi/arm/fas216.h +++ b/drivers/scsi/arm/fas216.h @@ -345,7 +345,7 @@ extern int fas216_queue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt); * : SCpnt - Command to queue * Returns : 0 - success, else error */ -extern int fas216_noqueue_command(struct Scsi_Host *, struct scsi_cmnd *) +extern int fas216_noqueue_command(struct Scsi_Host *, struct scsi_cmnd *); /* Function: irqreturn_t fas216_intr (FAS216_Info *info) * Purpose : handle interrupts from the interface to progress a command diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c index cb12a8e1466b..3f5e387ed564 100644 --- a/drivers/sh/clk/core.c +++ b/drivers/sh/clk/core.c @@ -418,8 +418,11 @@ int clk_register(struct clk *clk) list_add(&clk->sibling, &root_clks); list_add(&clk->node, &clock_list); + +#ifdef CONFIG_SH_CLK_CPG_LEGACY if (clk->ops && clk->ops->init) clk->ops->init(clk); +#endif out_unlock: mutex_unlock(&clock_list_sem); @@ -455,19 +458,13 @@ EXPORT_SYMBOL_GPL(clk_get_rate); int clk_set_rate(struct clk *clk, unsigned long rate) { - return clk_set_rate_ex(clk, rate, 0); -} -EXPORT_SYMBOL_GPL(clk_set_rate); - -int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id) -{ int ret = -EOPNOTSUPP; unsigned long flags; spin_lock_irqsave(&clock_lock, flags); if (likely(clk->ops && clk->ops->set_rate)) { - ret = clk->ops->set_rate(clk, rate, algo_id); + ret = clk->ops->set_rate(clk, rate); if (ret != 0) goto out_unlock; } else { @@ -485,7 +482,7 @@ out_unlock: return ret; } -EXPORT_SYMBOL_GPL(clk_set_rate_ex); +EXPORT_SYMBOL_GPL(clk_set_rate); int clk_set_parent(struct clk *clk, struct clk *parent) { @@ -653,8 +650,7 @@ static int clks_sysdev_suspend(struct sys_device *dev, pm_message_t state) clkp->ops->set_parent(clkp, clkp->parent); if (likely(clkp->ops->set_rate)) - clkp->ops->set_rate(clkp, - rate, NO_CHANGE); + clkp->ops->set_rate(clkp, rate); else if (likely(clkp->ops->recalc)) clkp->rate = clkp->ops->recalc(clkp); } diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c index 3aea5f0ceb09..6172335ae323 100644 --- a/drivers/sh/clk/cpg.c +++ b/drivers/sh/clk/cpg.c @@ -110,8 +110,7 @@ static int sh_clk_div6_set_parent(struct clk *clk, struct clk *parent) return 0; } -static int sh_clk_div6_set_rate(struct clk *clk, - unsigned long rate, int algo_id) +static int sh_clk_div6_set_rate(struct clk *clk, unsigned long rate) { unsigned long value; int idx; @@ -132,7 +131,7 @@ static int sh_clk_div6_enable(struct clk *clk) unsigned long value; int ret; - ret = sh_clk_div6_set_rate(clk, clk->rate, 0); + ret = sh_clk_div6_set_rate(clk, clk->rate); if (ret == 0) { value = __raw_readl(clk->enable_reg); value &= ~0x100; /* clear stop bit to enable clock */ @@ -253,7 +252,7 @@ static int sh_clk_div4_set_parent(struct clk *clk, struct clk *parent) return 0; } -static int sh_clk_div4_set_rate(struct clk *clk, unsigned long rate, int algo_id) +static int sh_clk_div4_set_rate(struct clk *clk, unsigned long rate) { struct clk_div4_table *d4t = clk->priv; unsigned long value; diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index ea071a5b6eee..44447f54942f 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -2301,7 +2301,7 @@ out: return ret; } -static DEVICE_ATTR(stat_status, S_IWUGO | S_IRUGO, read_status, reboot); +static DEVICE_ATTR(stat_status, S_IWUSR | S_IRUGO, read_status, reboot); static ssize_t read_human_status(struct device *dev, struct device_attribute *attr, char *buf) @@ -2364,8 +2364,7 @@ out: return ret; } -static DEVICE_ATTR(stat_human_status, S_IWUGO | S_IRUGO, - read_human_status, NULL); +static DEVICE_ATTR(stat_human_status, S_IRUGO, read_human_status, NULL); static ssize_t read_delin(struct device *dev, struct device_attribute *attr, char *buf) @@ -2397,7 +2396,7 @@ out: return ret; } -static DEVICE_ATTR(stat_delin, S_IWUGO | S_IRUGO, read_delin, NULL); +static DEVICE_ATTR(stat_delin, S_IRUGO, read_delin, NULL); #define UEA_ATTR(name, reset) \ \ diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index b5e20e873cba..717ff653fa23 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -2017,7 +2017,7 @@ static int __init usba_udc_probe(struct platform_device *pdev) } } else { /* gpio_request fail so use -EINVAL for gpio_is_valid */ - ubc->vbus_pin = -EINVAL; + udc->vbus_pin = -EINVAL; } } diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index 86afdc73322f..6e2599661b5b 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -1067,7 +1067,7 @@ static inline void create_debug_files (struct ehci_hcd *ehci) &debug_registers_fops)) goto file_error; - if (!debugfs_create_file("lpm", S_IRUGO|S_IWUGO, ehci->debug_dir, bus, + if (!debugfs_create_file("lpm", S_IRUGO|S_IWUSR, ehci->debug_dir, bus, &debug_lpm_fops)) goto file_error; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 502a7e6fef42..e9062806d4a2 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1063,10 +1063,11 @@ rescan: tmp && tmp != qh; tmp = tmp->qh_next.qh) continue; - /* periodic qh self-unlinks on empty */ - if (!tmp) - goto nogood; - unlink_async (ehci, qh); + /* periodic qh self-unlinks on empty, and a COMPLETING qh + * may already be unlinked. + */ + if (tmp) + unlink_async(ehci, qh); /* FALL THROUGH */ case QH_STATE_UNLINK: /* wait for hw to finish? */ case QH_STATE_UNLINK_WAIT: @@ -1083,7 +1084,6 @@ idle_timeout: } /* else FALL THROUGH */ default: -nogood: /* caller was supposed to have unlinked any requests; * that's not our job. just leak this memory. */ diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c index d36e4e75e08d..12f70c302b0b 100644 --- a/drivers/usb/host/ehci-mem.c +++ b/drivers/usb/host/ehci-mem.c @@ -141,6 +141,10 @@ static void ehci_mem_cleanup (struct ehci_hcd *ehci) qh_put (ehci->async); ehci->async = NULL; + if (ehci->dummy) + qh_put(ehci->dummy); + ehci->dummy = NULL; + /* DMA consistent memory and pools */ if (ehci->qtd_pool) dma_pool_destroy (ehci->qtd_pool); @@ -227,8 +231,26 @@ static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags) if (ehci->periodic == NULL) { goto fail; } - for (i = 0; i < ehci->periodic_size; i++) - ehci->periodic [i] = EHCI_LIST_END(ehci); + + if (ehci->use_dummy_qh) { + struct ehci_qh_hw *hw; + ehci->dummy = ehci_qh_alloc(ehci, flags); + if (!ehci->dummy) + goto fail; + + hw = ehci->dummy->hw; + hw->hw_next = EHCI_LIST_END(ehci); + hw->hw_qtd_next = EHCI_LIST_END(ehci); + hw->hw_alt_next = EHCI_LIST_END(ehci); + hw->hw_token &= ~QTD_STS_ACTIVE; + ehci->dummy->hw = hw; + + for (i = 0; i < ehci->periodic_size; i++) + ehci->periodic[i] = ehci->dummy->qh_dma; + } else { + for (i = 0; i < ehci->periodic_size; i++) + ehci->periodic[i] = EHCI_LIST_END(ehci); + } /* software shadow of hardware table */ ehci->pshadow = kcalloc(ehci->periodic_size, sizeof(void *), flags); diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index a1e8d273103f..01bb72b71832 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -103,6 +103,19 @@ static int ehci_pci_setup(struct usb_hcd *hcd) if (retval) return retval; + if ((pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x7808) || + (pdev->vendor == PCI_VENDOR_ID_ATI && pdev->device == 0x4396)) { + /* EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may + * read/write memory space which does not belong to it when + * there is NULL pointer with T-bit set to 1 in the frame list + * table. To avoid the issue, the frame list link pointer + * should always contain a valid pointer to a inactive qh. + */ + ehci->use_dummy_qh = 1; + ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI " + "dummy qh workaround\n"); + } + /* data structure init */ retval = ehci_init(hcd); if (retval) diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index a92526d6e5ae..d9f78eb26572 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -98,7 +98,14 @@ static void periodic_unlink (struct ehci_hcd *ehci, unsigned frame, void *ptr) */ *prev_p = *periodic_next_shadow(ehci, &here, Q_NEXT_TYPE(ehci, *hw_p)); - *hw_p = *shadow_next_periodic(ehci, &here, Q_NEXT_TYPE(ehci, *hw_p)); + + if (!ehci->use_dummy_qh || + *shadow_next_periodic(ehci, &here, Q_NEXT_TYPE(ehci, *hw_p)) + != EHCI_LIST_END(ehci)) + *hw_p = *shadow_next_periodic(ehci, &here, + Q_NEXT_TYPE(ehci, *hw_p)); + else + *hw_p = ehci->dummy->qh_dma; } /* how many of the uframe's 125 usecs are allocated? */ @@ -2335,7 +2342,11 @@ restart: * pointer for much longer, if at all. */ *q_p = q.itd->itd_next; - *hw_p = q.itd->hw_next; + if (!ehci->use_dummy_qh || + q.itd->hw_next != EHCI_LIST_END(ehci)) + *hw_p = q.itd->hw_next; + else + *hw_p = ehci->dummy->qh_dma; type = Q_NEXT_TYPE(ehci, q.itd->hw_next); wmb(); modified = itd_complete (ehci, q.itd); @@ -2368,7 +2379,11 @@ restart: * URB completion. */ *q_p = q.sitd->sitd_next; - *hw_p = q.sitd->hw_next; + if (!ehci->use_dummy_qh || + q.sitd->hw_next != EHCI_LIST_END(ehci)) + *hw_p = q.sitd->hw_next; + else + *hw_p = ehci->dummy->qh_dma; type = Q_NEXT_TYPE(ehci, q.sitd->hw_next); wmb(); modified = sitd_complete (ehci, q.sitd); diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index bde823f704e9..ba8eab366b82 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -73,6 +73,7 @@ struct ehci_hcd { /* one per controller */ /* async schedule support */ struct ehci_qh *async; + struct ehci_qh *dummy; /* For AMD quirk use */ struct ehci_qh *reclaim; unsigned scanning : 1; @@ -131,6 +132,7 @@ struct ehci_hcd { /* one per controller */ unsigned need_io_watchdog:1; unsigned broken_periodic:1; unsigned fs_i_thresh:1; /* Intel iso scheduling */ + unsigned use_dummy_qh:1; /* AMD Frame List table quirk*/ /* required for usb32 quirk */ #define OHCI_CTRL_HCFS (3 << 6) diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 6c4fb4efb4bb..43a39eb56cc6 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -2683,7 +2683,7 @@ static int __devexit isp1362_remove(struct platform_device *pdev) return 0; } -static int __init isp1362_probe(struct platform_device *pdev) +static int __devinit isp1362_probe(struct platform_device *pdev) { struct usb_hcd *hcd; struct isp1362_hcd *isp1362_hcd; diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 202770676da3..d178761c3981 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1045,7 +1045,7 @@ static inline u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci, if (udev->speed == USB_SPEED_SUPER) return ep->ss_ep_comp.wBytesPerInterval; - max_packet = ep->desc.wMaxPacketSize & 0x3ff; + max_packet = GET_MAX_PACKET(ep->desc.wMaxPacketSize); max_burst = (ep->desc.wMaxPacketSize & 0x1800) >> 11; /* A 0 in max burst means 1 transfer per ESIT */ return max_packet * (max_burst + 1); @@ -1135,7 +1135,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, /* Fall through */ case USB_SPEED_FULL: case USB_SPEED_LOW: - max_packet = ep->desc.wMaxPacketSize & 0x3ff; + max_packet = GET_MAX_PACKET(ep->desc.wMaxPacketSize); ep_ctx->ep_info2 |= MAX_PACKET(max_packet); break; default: diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 9f3115e729b1..df558f6f84e3 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2104,7 +2104,6 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) if (!(status & STS_EINT)) { spin_unlock(&xhci->lock); - xhci_warn(xhci, "Spurious interrupt.\n"); return IRQ_NONE; } xhci_dbg(xhci, "op reg status = %08x\n", status); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 5d7d4e951ea4..06fca0835b52 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -577,6 +577,65 @@ static void xhci_restore_registers(struct xhci_hcd *xhci) xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base); } +static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci) +{ + u64 val_64; + + /* step 2: initialize command ring buffer */ + val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); + val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) | + (xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg, + xhci->cmd_ring->dequeue) & + (u64) ~CMD_RING_RSVD_BITS) | + xhci->cmd_ring->cycle_state; + xhci_dbg(xhci, "// Setting command ring address to 0x%llx\n", + (long unsigned long) val_64); + xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring); +} + +/* + * The whole command ring must be cleared to zero when we suspend the host. + * + * The host doesn't save the command ring pointer in the suspend well, so we + * need to re-program it on resume. Unfortunately, the pointer must be 64-byte + * aligned, because of the reserved bits in the command ring dequeue pointer + * register. Therefore, we can't just set the dequeue pointer back in the + * middle of the ring (TRBs are 16-byte aligned). + */ +static void xhci_clear_command_ring(struct xhci_hcd *xhci) +{ + struct xhci_ring *ring; + struct xhci_segment *seg; + + ring = xhci->cmd_ring; + seg = ring->deq_seg; + do { + memset(seg->trbs, 0, SEGMENT_SIZE); + seg = seg->next; + } while (seg != ring->deq_seg); + + /* Reset the software enqueue and dequeue pointers */ + ring->deq_seg = ring->first_seg; + ring->dequeue = ring->first_seg->trbs; + ring->enq_seg = ring->deq_seg; + ring->enqueue = ring->dequeue; + + /* + * Ring is now zeroed, so the HW should look for change of ownership + * when the cycle bit is set to 1. + */ + ring->cycle_state = 1; + + /* + * Reset the hardware dequeue pointer. + * Yes, this will need to be re-written after resume, but we're paranoid + * and want to make sure the hardware doesn't access bogus memory + * because, say, the BIOS or an SMI started the host without changing + * the command ring pointers. + */ + xhci_set_cmd_ring_deq(xhci); +} + /* * Stop HC (not bus-specific) * @@ -604,6 +663,7 @@ int xhci_suspend(struct xhci_hcd *xhci) spin_unlock_irq(&xhci->lock); return -ETIMEDOUT; } + xhci_clear_command_ring(xhci); /* step 3: save registers */ xhci_save_registers(xhci); @@ -635,7 +695,6 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) u32 command, temp = 0; struct usb_hcd *hcd = xhci_to_hcd(xhci); struct pci_dev *pdev = to_pci_dev(hcd->self.controller); - u64 val_64; int old_state, retval; old_state = hcd->state; @@ -648,15 +707,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* step 1: restore register */ xhci_restore_registers(xhci); /* step 2: initialize command ring buffer */ - val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); - val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) | - (xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg, - xhci->cmd_ring->dequeue) & - (u64) ~CMD_RING_RSVD_BITS) | - xhci->cmd_ring->cycle_state; - xhci_dbg(xhci, "// Setting command ring address to 0x%llx\n", - (long unsigned long) val_64); - xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring); + xhci_set_cmd_ring_deq(xhci); /* step 3: restore state and start state*/ /* step 3: set CRS flag */ command = xhci_readl(xhci, &xhci->op_regs->command); @@ -714,6 +765,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) return retval; } + spin_unlock_irq(&xhci->lock); /* Re-setup MSI-X */ if (hcd->irq) free_irq(hcd->irq, hcd); @@ -736,6 +788,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) hcd->irq = pdev->irq; } + spin_lock_irq(&xhci->lock); /* step 4: set Run/Stop bit */ command = xhci_readl(xhci, &xhci->op_regs->command); command |= CMD_RUN; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 93d3bf4d213c..85e65647d445 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -621,6 +621,11 @@ struct xhci_ep_ctx { #define MAX_PACKET_MASK (0xffff << 16) #define MAX_PACKET_DECODED(p) (((p) >> 16) & 0xffff) +/* Get max packet size from ep desc. Bit 10..0 specify the max packet size. + * USB2.0 spec 9.6.6. + */ +#define GET_MAX_PACKET(p) ((p) & 0x7ff) + /* tx_info bitmasks */ #define AVG_TRB_LENGTH_FOR_EP(p) ((p) & 0xffff) #define MAX_ESIT_PAYLOAD_FOR_EP(p) (((p) & 0xffff) << 16) diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c index 2f43c57743c9..9251773ecef4 100644 --- a/drivers/usb/misc/cypress_cy7c63.c +++ b/drivers/usb/misc/cypress_cy7c63.c @@ -196,11 +196,9 @@ static ssize_t get_port1_handler(struct device *dev, return read_port(dev, attr, buf, 1, CYPRESS_READ_PORT_ID1); } -static DEVICE_ATTR(port0, S_IWUGO | S_IRUGO, - get_port0_handler, set_port0_handler); +static DEVICE_ATTR(port0, S_IRUGO | S_IWUSR, get_port0_handler, set_port0_handler); -static DEVICE_ATTR(port1, S_IWUGO | S_IRUGO, - get_port1_handler, set_port1_handler); +static DEVICE_ATTR(port1, S_IRUGO | S_IWUSR, get_port1_handler, set_port1_handler); static int cypress_probe(struct usb_interface *interface, diff --git a/drivers/usb/misc/trancevibrator.c b/drivers/usb/misc/trancevibrator.c index d77aba46ae85..f63776a48e2a 100644 --- a/drivers/usb/misc/trancevibrator.c +++ b/drivers/usb/misc/trancevibrator.c @@ -86,7 +86,7 @@ static ssize_t set_speed(struct device *dev, struct device_attribute *attr, return count; } -static DEVICE_ATTR(speed, S_IWUGO | S_IRUGO, show_speed, set_speed); +static DEVICE_ATTR(speed, S_IRUGO | S_IWUSR, show_speed, set_speed); static int tv_probe(struct usb_interface *interface, const struct usb_device_id *id) diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c index 63da2c3c838f..c96f51de1696 100644 --- a/drivers/usb/misc/usbled.c +++ b/drivers/usb/misc/usbled.c @@ -94,7 +94,7 @@ static ssize_t set_##value(struct device *dev, struct device_attribute *attr, co change_color(led); \ return count; \ } \ -static DEVICE_ATTR(value, S_IWUGO | S_IRUGO, show_##value, set_##value); +static DEVICE_ATTR(value, S_IRUGO | S_IWUSR, show_##value, set_##value); show_set(blue); show_set(red); show_set(green); diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c index de8ef945b536..417b8f207e8b 100644 --- a/drivers/usb/misc/usbsevseg.c +++ b/drivers/usb/misc/usbsevseg.c @@ -192,7 +192,7 @@ static ssize_t set_attr_##name(struct device *dev, \ \ return count; \ } \ -static DEVICE_ATTR(name, S_IWUGO | S_IRUGO, show_attr_##name, set_attr_##name); +static DEVICE_ATTR(name, S_IRUGO | S_IWUSR, show_attr_##name, set_attr_##name); static ssize_t show_attr_text(struct device *dev, struct device_attribute *attr, char *buf) @@ -223,7 +223,7 @@ static ssize_t set_attr_text(struct device *dev, return count; } -static DEVICE_ATTR(text, S_IWUGO | S_IRUGO, show_attr_text, set_attr_text); +static DEVICE_ATTR(text, S_IRUGO | S_IWUSR, show_attr_text, set_attr_text); static ssize_t show_attr_decimals(struct device *dev, struct device_attribute *attr, char *buf) @@ -272,8 +272,7 @@ static ssize_t set_attr_decimals(struct device *dev, return count; } -static DEVICE_ATTR(decimals, S_IWUGO | S_IRUGO, - show_attr_decimals, set_attr_decimals); +static DEVICE_ATTR(decimals, S_IRUGO | S_IWUSR, show_attr_decimals, set_attr_decimals); static ssize_t show_attr_textmode(struct device *dev, struct device_attribute *attr, char *buf) @@ -319,8 +318,7 @@ static ssize_t set_attr_textmode(struct device *dev, return -EINVAL; } -static DEVICE_ATTR(textmode, S_IWUGO | S_IRUGO, - show_attr_textmode, set_attr_textmode); +static DEVICE_ATTR(textmode, S_IRUGO | S_IWUSR, show_attr_textmode, set_attr_textmode); MYDEV_ATTR_SIMPLE_UNSIGNED(powered, update_display_powered); diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c index bdc3ea66be69..9fea48264fa2 100644 --- a/drivers/usb/otg/langwell_otg.c +++ b/drivers/usb/otg/langwell_otg.c @@ -1896,7 +1896,7 @@ set_a_bus_req(struct device *dev, struct device_attribute *attr, } return count; } -static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUGO, get_a_bus_req, set_a_bus_req); +static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUSR, get_a_bus_req, set_a_bus_req); static ssize_t get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf) @@ -1942,8 +1942,7 @@ set_a_bus_drop(struct device *dev, struct device_attribute *attr, } return count; } -static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUGO, - get_a_bus_drop, set_a_bus_drop); +static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUSR, get_a_bus_drop, set_a_bus_drop); static ssize_t get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf) @@ -1988,7 +1987,7 @@ set_b_bus_req(struct device *dev, struct device_attribute *attr, } return count; } -static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUGO, get_b_bus_req, set_b_bus_req); +static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUSR, get_b_bus_req, set_b_bus_req); static ssize_t set_a_clr_err(struct device *dev, struct device_attribute *attr, @@ -2012,7 +2011,7 @@ set_a_clr_err(struct device *dev, struct device_attribute *attr, } return count; } -static DEVICE_ATTR(a_clr_err, S_IWUGO, NULL, set_a_clr_err); +static DEVICE_ATTR(a_clr_err, S_IWUSR, NULL, set_a_clr_err); static struct attribute *inputs_attrs[] = { &dev_attr_a_bus_req.attr, diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c index 57fc2f532cab..ceba512f84d0 100644 --- a/drivers/usb/storage/sierra_ms.c +++ b/drivers/usb/storage/sierra_ms.c @@ -121,7 +121,7 @@ static ssize_t show_truinst(struct device *dev, struct device_attribute *attr, } return result; } -static DEVICE_ATTR(truinst, S_IWUGO | S_IRUGO, show_truinst, NULL); +static DEVICE_ATTR(truinst, S_IRUGO, show_truinst, NULL); int sierra_ms_init(struct us_data *us) { diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c index e207810bba3c..08703299ef61 100644 --- a/drivers/video/backlight/backlight.c +++ b/drivers/video/backlight/backlight.c @@ -197,12 +197,12 @@ static int backlight_suspend(struct device *dev, pm_message_t state) { struct backlight_device *bd = to_backlight_device(dev); - if (bd->ops->options & BL_CORE_SUSPENDRESUME) { - mutex_lock(&bd->ops_lock); + mutex_lock(&bd->ops_lock); + if (bd->ops && bd->ops->options & BL_CORE_SUSPENDRESUME) { bd->props.state |= BL_CORE_SUSPENDED; backlight_update_status(bd); - mutex_unlock(&bd->ops_lock); } + mutex_unlock(&bd->ops_lock); return 0; } @@ -211,12 +211,12 @@ static int backlight_resume(struct device *dev) { struct backlight_device *bd = to_backlight_device(dev); - if (bd->ops->options & BL_CORE_SUSPENDRESUME) { - mutex_lock(&bd->ops_lock); + mutex_lock(&bd->ops_lock); + if (bd->ops && bd->ops->options & BL_CORE_SUSPENDRESUME) { bd->props.state &= ~BL_CORE_SUSPENDED; backlight_update_status(bd); - mutex_unlock(&bd->ops_lock); } + mutex_unlock(&bd->ops_lock); return 0; } diff --git a/drivers/video/fbcmap.c b/drivers/video/fbcmap.c index f53b9f1d6aba..affdf3e32cf3 100644 --- a/drivers/video/fbcmap.c +++ b/drivers/video/fbcmap.c @@ -88,34 +88,48 @@ static const struct fb_cmap default_16_colors = { * */ -int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp) +int fb_alloc_cmap_gfp(struct fb_cmap *cmap, int len, int transp, gfp_t flags) { - int size = len*sizeof(u16); - - if (cmap->len != len) { - fb_dealloc_cmap(cmap); - if (!len) - return 0; - if (!(cmap->red = kmalloc(size, GFP_ATOMIC))) - goto fail; - if (!(cmap->green = kmalloc(size, GFP_ATOMIC))) - goto fail; - if (!(cmap->blue = kmalloc(size, GFP_ATOMIC))) - goto fail; - if (transp) { - if (!(cmap->transp = kmalloc(size, GFP_ATOMIC))) + int size = len * sizeof(u16); + int ret = -ENOMEM; + + if (cmap->len != len) { + fb_dealloc_cmap(cmap); + if (!len) + return 0; + + cmap->red = kmalloc(size, flags); + if (!cmap->red) + goto fail; + cmap->green = kmalloc(size, flags); + if (!cmap->green) + goto fail; + cmap->blue = kmalloc(size, flags); + if (!cmap->blue) + goto fail; + if (transp) { + cmap->transp = kmalloc(size, flags); + if (!cmap->transp) + goto fail; + } else { + cmap->transp = NULL; + } + } + cmap->start = 0; + cmap->len = len; + ret = fb_copy_cmap(fb_default_cmap(len), cmap); + if (ret) goto fail; - } else - cmap->transp = NULL; - } - cmap->start = 0; - cmap->len = len; - fb_copy_cmap(fb_default_cmap(len), cmap); - return 0; + return 0; fail: - fb_dealloc_cmap(cmap); - return -ENOMEM; + fb_dealloc_cmap(cmap); + return ret; +} + +int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp) +{ + return fb_alloc_cmap_gfp(cmap, len, transp, GFP_ATOMIC); } /** @@ -250,8 +264,12 @@ int fb_set_user_cmap(struct fb_cmap_user *cmap, struct fb_info *info) int rc, size = cmap->len * sizeof(u16); struct fb_cmap umap; + if (size < 0 || size < cmap->len) + return -E2BIG; + memset(&umap, 0, sizeof(struct fb_cmap)); - rc = fb_alloc_cmap(&umap, cmap->len, cmap->transp != NULL); + rc = fb_alloc_cmap_gfp(&umap, cmap->len, cmap->transp != NULL, + GFP_KERNEL); if (rc) return rc; if (copy_from_user(umap.red, cmap->red, size) || diff --git a/drivers/video/geode/lxfb_ops.c b/drivers/video/geode/lxfb_ops.c index bc35a95e59d4..85ec7f64c42a 100644 --- a/drivers/video/geode/lxfb_ops.c +++ b/drivers/video/geode/lxfb_ops.c @@ -276,10 +276,10 @@ static void lx_graphics_enable(struct fb_info *info) write_fp(par, FP_PT1, 0); temp = FP_PT2_SCRC; - if (info->var.sync & FB_SYNC_HOR_HIGH_ACT) + if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT)) temp |= FP_PT2_HSP; - if (info->var.sync & FB_SYNC_VERT_HIGH_ACT) + if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT)) temp |= FP_PT2_VSP; write_fp(par, FP_PT2, temp); diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c index 7cfc170bce19..ca0f6be9d12e 100644 --- a/drivers/video/mx3fb.c +++ b/drivers/video/mx3fb.c @@ -27,6 +27,7 @@ #include <linux/clk.h> #include <linux/mutex.h> +#include <mach/dma.h> #include <mach/hardware.h> #include <mach/ipu.h> #include <mach/mx3fb.h> @@ -1420,6 +1421,9 @@ static bool chan_filter(struct dma_chan *chan, void *arg) struct device *dev; struct mx3fb_platform_data *mx3fb_pdata; + if (!imx_dma_is_ipu(chan)) + return false; + if (!rq) return false; diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c index 9b1364723c65..b02d97a879d6 100644 --- a/drivers/video/sh_mobile_lcdcfb.c +++ b/drivers/video/sh_mobile_lcdcfb.c @@ -860,7 +860,7 @@ static void sh_mobile_fb_reconfig(struct fb_info *info) /* Couldn't reconfigure, hopefully, can continue as before */ return; - info->fix.line_length = mode2.xres * (ch->cfg.bpp / 8); + info->fix.line_length = mode1.xres * (ch->cfg.bpp / 8); /* * fb_set_var() calls the notifier change internally, only if @@ -868,7 +868,7 @@ static void sh_mobile_fb_reconfig(struct fb_info *info) * user event, we have to call the chain ourselves. */ event.info = info; - event.data = &mode2; + event.data = &mode1; fb_notifier_call_chain(evnt, &event); } diff --git a/drivers/video/sis/init.c b/drivers/video/sis/init.c index c311ad3c3687..31137adc8fba 100644 --- a/drivers/video/sis/init.c +++ b/drivers/video/sis/init.c @@ -62,11 +62,11 @@ #include "init.h" -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 #include "300vtbl.h" #endif -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 #include "310vtbl.h" #endif @@ -78,7 +78,7 @@ /* POINTER INITIALIZATION */ /*********************************************/ -#if defined(SIS300) || defined(SIS315H) +#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315) static void InitCommonPointer(struct SiS_Private *SiS_Pr) { @@ -160,7 +160,7 @@ InitCommonPointer(struct SiS_Private *SiS_Pr) } #endif -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 static void InitTo300Pointer(struct SiS_Private *SiS_Pr) { @@ -237,7 +237,7 @@ InitTo300Pointer(struct SiS_Private *SiS_Pr) } #endif -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 static void InitTo310Pointer(struct SiS_Private *SiS_Pr) { @@ -321,13 +321,13 @@ bool SiSInitPtr(struct SiS_Private *SiS_Pr) { if(SiS_Pr->ChipType < SIS_315H) { -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 InitTo300Pointer(SiS_Pr); #else return false; #endif } else { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 InitTo310Pointer(SiS_Pr); #else return false; @@ -340,9 +340,7 @@ SiSInitPtr(struct SiS_Private *SiS_Pr) /* HELPER: Get ModeID */ /*********************************************/ -#ifndef SIS_XORG_XF86 static -#endif unsigned short SiS_GetModeID(int VGAEngine, unsigned int VBFlags, int HDisplay, int VDisplay, int Depth, bool FSTN, int LCDwidth, int LCDheight) @@ -884,51 +882,51 @@ SiS_GetModeID_VGA2(int VGAEngine, unsigned int VBFlags, int HDisplay, int VDispl void SiS_SetReg(SISIOADDRESS port, unsigned short index, unsigned short data) { - OutPortByte(port, index); - OutPortByte(port + 1, data); + outb((u8)index, port); + outb((u8)data, port + 1); } void SiS_SetRegByte(SISIOADDRESS port, unsigned short data) { - OutPortByte(port, data); + outb((u8)data, port); } void SiS_SetRegShort(SISIOADDRESS port, unsigned short data) { - OutPortWord(port, data); + outw((u16)data, port); } void SiS_SetRegLong(SISIOADDRESS port, unsigned int data) { - OutPortLong(port, data); + outl((u32)data, port); } unsigned char SiS_GetReg(SISIOADDRESS port, unsigned short index) { - OutPortByte(port, index); - return(InPortByte(port + 1)); + outb((u8)index, port); + return inb(port + 1); } unsigned char SiS_GetRegByte(SISIOADDRESS port) { - return(InPortByte(port)); + return inb(port); } unsigned short SiS_GetRegShort(SISIOADDRESS port) { - return(InPortWord(port)); + return inw(port); } unsigned int SiS_GetRegLong(SISIOADDRESS port) { - return(InPortLong(port)); + return inl(port); } void @@ -1089,7 +1087,7 @@ static void SiSInitPCIetc(struct SiS_Private *SiS_Pr) { switch(SiS_Pr->ChipType) { -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 case SIS_300: case SIS_540: case SIS_630: @@ -1108,7 +1106,7 @@ SiSInitPCIetc(struct SiS_Private *SiS_Pr) SiS_SetRegOR(SiS_Pr->SiS_P3c4,0x1E,0x5A); break; #endif -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 case SIS_315H: case SIS_315: case SIS_315PRO: @@ -1152,9 +1150,7 @@ SiSInitPCIetc(struct SiS_Private *SiS_Pr) /* HELPER: SetLVDSetc */ /*********************************************/ -#ifdef SIS_LINUX_KERNEL static -#endif void SiSSetLVDSetc(struct SiS_Private *SiS_Pr) { @@ -1174,7 +1170,7 @@ SiSSetLVDSetc(struct SiS_Private *SiS_Pr) if((temp == 1) || (temp == 2)) return; switch(SiS_Pr->ChipType) { -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 case SIS_540: case SIS_630: case SIS_730: @@ -1188,7 +1184,7 @@ SiSSetLVDSetc(struct SiS_Private *SiS_Pr) } break; #endif -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 case SIS_550: case SIS_650: case SIS_740: @@ -1420,9 +1416,7 @@ SiS_ResetSegmentRegisters(struct SiS_Private *SiS_Pr) /* HELPER: GetVBType */ /*********************************************/ -#ifdef SIS_LINUX_KERNEL static -#endif void SiS_GetVBType(struct SiS_Private *SiS_Pr) { @@ -1487,7 +1481,6 @@ SiS_GetVBType(struct SiS_Private *SiS_Pr) /* HELPER: Check RAM size */ /*********************************************/ -#ifdef SIS_LINUX_KERNEL static bool SiS_CheckMemorySize(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex) @@ -1501,13 +1494,12 @@ SiS_CheckMemorySize(struct SiS_Private *SiS_Pr, unsigned short ModeNo, if(AdapterMemSize < memorysize) return false; return true; } -#endif /*********************************************/ /* HELPER: Get DRAM type */ /*********************************************/ -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 static unsigned char SiS_Get310DRAMType(struct SiS_Private *SiS_Pr) { @@ -1574,7 +1566,6 @@ SiS_GetMCLK(struct SiS_Private *SiS_Pr) /* HELPER: ClearBuffer */ /*********************************************/ -#ifdef SIS_LINUX_KERNEL static void SiS_ClearBuffer(struct SiS_Private *SiS_Pr, unsigned short ModeNo) { @@ -1587,7 +1578,7 @@ SiS_ClearBuffer(struct SiS_Private *SiS_Pr, unsigned short ModeNo) if(SiS_Pr->SiS_ModeType >= ModeEGA) { if(ModeNo > 0x13) { - SiS_SetMemory(memaddr, memsize, 0); + memset_io(memaddr, 0, memsize); } else { pBuffer = (unsigned short SISIOMEMTYPE *)memaddr; for(i = 0; i < 0x4000; i++) writew(0x0000, &pBuffer[i]); @@ -1596,10 +1587,9 @@ SiS_ClearBuffer(struct SiS_Private *SiS_Pr, unsigned short ModeNo) pBuffer = (unsigned short SISIOMEMTYPE *)memaddr; for(i = 0; i < 0x4000; i++) writew(0x0720, &pBuffer[i]); } else { - SiS_SetMemory(memaddr, 0x8000, 0); + memset_io(memaddr, 0, 0x8000); } } -#endif /*********************************************/ /* HELPER: SearchModeID */ @@ -2132,7 +2122,7 @@ SiS_SetCRT1CRTC(struct SiS_Private *SiS_Pr, unsigned short ModeNo, SiS_SetReg(SiS_Pr->SiS_P3d4,0x14,0x4F); } -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if(SiS_Pr->ChipType == XGI_20) { SiS_SetReg(SiS_Pr->SiS_P3d4,0x04,crt1data[4] - 1); if(!(temp = crt1data[5] & 0x1f)) { @@ -2215,7 +2205,7 @@ SiS_SetCRT1VCLK(struct SiS_Private *SiS_Pr, unsigned short ModeNo, SiS_SetReg(SiS_Pr->SiS_P3c4,0x2c,clkb); if(SiS_Pr->ChipType >= SIS_315H) { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 SiS_SetReg(SiS_Pr->SiS_P3c4,0x2D,0x01); if(SiS_Pr->ChipType == XGI_20) { unsigned short mf = SiS_GetModeFlag(SiS_Pr, ModeNo, ModeIdIndex); @@ -2236,7 +2226,7 @@ SiS_SetCRT1VCLK(struct SiS_Private *SiS_Pr, unsigned short ModeNo, /* FIFO */ /*********************************************/ -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 void SiS_GetFIFOThresholdIndex300(struct SiS_Private *SiS_Pr, unsigned short *idx1, unsigned short *idx2) @@ -2506,11 +2496,7 @@ SiS_SetCRT1FIFO_630(struct SiS_Private *SiS_Pr, unsigned short ModeNo, SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x09,0x80,data); /* Write foreground and background queue */ -#ifdef SIS_LINUX_KERNEL templ = sisfb_read_nbridge_pci_dword(SiS_Pr, 0x50); -#else - templ = pciReadLong(0x00000000, 0x50); -#endif if(SiS_Pr->ChipType == SIS_730) { @@ -2530,13 +2516,8 @@ SiS_SetCRT1FIFO_630(struct SiS_Private *SiS_Pr, unsigned short ModeNo, } -#ifdef SIS_LINUX_KERNEL sisfb_write_nbridge_pci_dword(SiS_Pr, 0x50, templ); templ = sisfb_read_nbridge_pci_dword(SiS_Pr, 0xA0); -#else - pciWriteLong(0x00000000, 0x50, templ); - templ = pciReadLong(0x00000000, 0xA0); -#endif /* GUI grant timer (PCI config 0xA3) */ if(SiS_Pr->ChipType == SIS_730) { @@ -2552,15 +2533,11 @@ SiS_SetCRT1FIFO_630(struct SiS_Private *SiS_Pr, unsigned short ModeNo, } -#ifdef SIS_LINUX_KERNEL sisfb_write_nbridge_pci_dword(SiS_Pr, 0xA0, templ); -#else - pciWriteLong(0x00000000, 0xA0, templ); -#endif } -#endif /* SIS300 */ +#endif /* CONFIG_FB_SIS_300 */ -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 static void SiS_SetCRT1FIFO_310(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex) { @@ -2612,7 +2589,7 @@ SiS_SetVCLKState(struct SiS_Private *SiS_Pr, unsigned short ModeNo, } if(SiS_Pr->ChipType < SIS_315H) { -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 if(VCLK > 150) data |= 0x80; SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x07,0x7B,data); @@ -2621,7 +2598,7 @@ SiS_SetVCLKState(struct SiS_Private *SiS_Pr, unsigned short ModeNo, SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x32,0xF7,data); #endif } else if(SiS_Pr->ChipType < XGI_20) { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if(VCLK >= 166) data |= 0x0c; SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x32,0xf3,data); @@ -2630,7 +2607,7 @@ SiS_SetVCLKState(struct SiS_Private *SiS_Pr, unsigned short ModeNo, } #endif } else { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if(VCLK >= 200) data |= 0x0c; if(SiS_Pr->ChipType == XGI_20) data &= ~0x04; SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x32,0xf3,data); @@ -2675,7 +2652,7 @@ SiS_SetCRT1ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RRTI) { unsigned short data, infoflag = 0, modeflag, resindex; -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 unsigned char *ROMAddr = SiS_Pr->VirtualRomBase; unsigned short data2, data3; #endif @@ -2736,7 +2713,7 @@ SiS_SetCRT1ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x0F,0xB7,data); } -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if(SiS_Pr->ChipType >= SIS_315H) { SiS_SetRegAND(SiS_Pr->SiS_P3c4,0x31,0xfb); } @@ -2826,7 +2803,7 @@ SiS_SetCRT1ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, SiS_SetVCLKState(SiS_Pr, ModeNo, RRTI, ModeIdIndex); -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if(((SiS_Pr->ChipType >= SIS_315H) && (SiS_Pr->ChipType < SIS_661)) || (SiS_Pr->ChipType == XGI_40)) { if(SiS_GetReg(SiS_Pr->SiS_P3d4,0x31) & 0x40) { @@ -2845,7 +2822,7 @@ SiS_SetCRT1ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, #endif } -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 static void SiS_SetupDualChip(struct SiS_Private *SiS_Pr) { @@ -2999,11 +2976,6 @@ SiS_SetCRT1Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sho SiS_Pr->SiS_SelectCRT2Rate = 0; SiS_Pr->SiS_SetFlag &= (~ProgrammingCRT2); -#ifdef SIS_XORG_XF86 - xf86DrvMsgVerb(0, X_PROBED, 4, "(init: VBType=0x%04x, VBInfo=0x%04x)\n", - SiS_Pr->SiS_VBType, SiS_Pr->SiS_VBInfo); -#endif - if(SiS_Pr->SiS_VBInfo & SetSimuScanMode) { if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) { SiS_Pr->SiS_SetFlag |= ProgrammingCRT2; @@ -3028,7 +3000,7 @@ SiS_SetCRT1Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sho } switch(SiS_Pr->ChipType) { -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 case SIS_300: SiS_SetCRT1FIFO_300(SiS_Pr, ModeNo, RefreshRateTableIndex); break; @@ -3039,7 +3011,7 @@ SiS_SetCRT1Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sho break; #endif default: -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if(SiS_Pr->ChipType == XGI_20) { unsigned char sr2b = 0, sr2c = 0; switch(ModeNo) { @@ -3062,7 +3034,7 @@ SiS_SetCRT1Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sho SiS_SetCRT1ModeRegs(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex); -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if(SiS_Pr->ChipType == XGI_40) { SiS_SetupDualChip(SiS_Pr); } @@ -3070,11 +3042,9 @@ SiS_SetCRT1Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sho SiS_LoadDAC(SiS_Pr, ModeNo, ModeIdIndex); -#ifdef SIS_LINUX_KERNEL if(SiS_Pr->SiS_flag_clearbuffer) { SiS_ClearBuffer(SiS_Pr, ModeNo); } -#endif if(!(SiS_Pr->SiS_VBInfo & (SetSimuScanMode | SwitchCRT2 | SetCRT2ToLCDA))) { SiS_WaitRetrace1(SiS_Pr); @@ -3104,7 +3074,7 @@ SiS_InitVB(struct SiS_Private *SiS_Pr) static void SiS_ResetVB(struct SiS_Private *SiS_Pr) { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 unsigned char *ROMAddr = SiS_Pr->VirtualRomBase; unsigned short temp; @@ -3139,7 +3109,7 @@ SiS_StrangeStuff(struct SiS_Private *SiS_Pr) * which locks CRT2 in some way to CRT1 timing. Disable * this here. */ -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if((IS_SIS651) || (IS_SISM650) || SiS_Pr->ChipType == SIS_340 || SiS_Pr->ChipType == XGI_40) { @@ -3160,7 +3130,7 @@ SiS_StrangeStuff(struct SiS_Private *SiS_Pr) static void SiS_Handle760(struct SiS_Private *SiS_Pr) { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 unsigned int somebase; unsigned char temp1, temp2, temp3; @@ -3170,11 +3140,7 @@ SiS_Handle760(struct SiS_Private *SiS_Pr) (!(SiS_Pr->SiS_SysFlags & SF_760UMA)) ) return; -#ifdef SIS_LINUX_KERNEL somebase = sisfb_read_mio_pci_word(SiS_Pr, 0x74); -#else - somebase = pciReadWord(0x00001000, 0x74); -#endif somebase &= 0xffff; if(somebase == 0) return; @@ -3190,105 +3156,34 @@ SiS_Handle760(struct SiS_Private *SiS_Pr) temp2 = 0x0b; } -#ifdef SIS_LINUX_KERNEL sisfb_write_nbridge_pci_byte(SiS_Pr, 0x7e, temp1); sisfb_write_nbridge_pci_byte(SiS_Pr, 0x8d, temp2); -#else - pciWriteByte(0x00000000, 0x7e, temp1); - pciWriteByte(0x00000000, 0x8d, temp2); -#endif SiS_SetRegByte((somebase + 0x85), temp3); #endif } /*********************************************/ -/* X.org/XFree86: SET SCREEN PITCH */ -/*********************************************/ - -#ifdef SIS_XORG_XF86 -static void -SiS_SetPitchCRT1(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn) -{ - SISPtr pSiS = SISPTR(pScrn); - unsigned short HDisplay = pSiS->scrnPitch >> 3; - - SiS_SetReg(SiS_Pr->SiS_P3d4,0x13,(HDisplay & 0xFF)); - SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x0E,0xF0,(HDisplay >> 8)); -} - -static void -SiS_SetPitchCRT2(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn) -{ - SISPtr pSiS = SISPTR(pScrn); - unsigned short HDisplay = pSiS->scrnPitch2 >> 3; - - /* Unlock CRT2 */ - if(pSiS->VGAEngine == SIS_315_VGA) - SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2F, 0x01); - else - SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x24, 0x01); - - SiS_SetReg(SiS_Pr->SiS_Part1Port,0x07,(HDisplay & 0xFF)); - SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x09,0xF0,(HDisplay >> 8)); -} - -static void -SiS_SetPitch(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn) -{ - SISPtr pSiS = SISPTR(pScrn); - bool isslavemode = false; - - if( (pSiS->VBFlags2 & VB2_VIDEOBRIDGE) && - ( ((pSiS->VGAEngine == SIS_300_VGA) && - (SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0xa0) == 0x20) || - ((pSiS->VGAEngine == SIS_315_VGA) && - (SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0x50) == 0x10) ) ) { - isslavemode = true; - } - - /* We need to set pitch for CRT1 if bridge is in slave mode, too */ - if((pSiS->VBFlags & DISPTYPE_DISP1) || (isslavemode)) { - SiS_SetPitchCRT1(SiS_Pr, pScrn); - } - /* We must not set the pitch for CRT2 if bridge is in slave mode */ - if((pSiS->VBFlags & DISPTYPE_DISP2) && (!isslavemode)) { - SiS_SetPitchCRT2(SiS_Pr, pScrn); - } -} -#endif - -/*********************************************/ /* SiSSetMode() */ /*********************************************/ -#ifdef SIS_XORG_XF86 -/* We need pScrn for setting the pitch correctly */ -bool -SiSSetMode(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn, unsigned short ModeNo, bool dosetpitch) -#else bool SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo) -#endif { SISIOADDRESS BaseAddr = SiS_Pr->IOAddress; unsigned short RealModeNo, ModeIdIndex; unsigned char backupreg = 0; -#ifdef SIS_LINUX_KERNEL unsigned short KeepLockReg; SiS_Pr->UseCustomMode = false; SiS_Pr->CRT1UsesCustomMode = false; -#endif SiS_Pr->SiS_flag_clearbuffer = 0; if(SiS_Pr->UseCustomMode) { ModeNo = 0xfe; } else { -#ifdef SIS_LINUX_KERNEL if(!(ModeNo & 0x80)) SiS_Pr->SiS_flag_clearbuffer = 1; -#endif ModeNo &= 0x7f; } @@ -3301,13 +3196,8 @@ SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo) SiS_GetSysFlags(SiS_Pr); SiS_Pr->SiS_VGAINFO = 0x11; -#if defined(SIS_XORG_XF86) && (defined(i386) || defined(__i386) || defined(__i386__) || defined(__AMD64__) || defined(__amd64__) || defined(__x86_64__)) - if(pScrn) SiS_Pr->SiS_VGAINFO = SiS_GetSetBIOSScratch(pScrn, 0x489, 0xff); -#endif -#ifdef SIS_LINUX_KERNEL KeepLockReg = SiS_GetReg(SiS_Pr->SiS_P3c4,0x05); -#endif SiS_SetReg(SiS_Pr->SiS_P3c4,0x05,0x86); SiSInitPCIetc(SiS_Pr); @@ -3344,12 +3234,10 @@ SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo) SiS_GetLCDResInfo(SiS_Pr, ModeNo, ModeIdIndex); SiS_SetLowModeTest(SiS_Pr, ModeNo); -#ifdef SIS_LINUX_KERNEL /* Check memory size (kernel framebuffer driver only) */ if(!SiS_CheckMemorySize(SiS_Pr, ModeNo, ModeIdIndex)) { return false; } -#endif SiS_OpenCRTC(SiS_Pr); @@ -3384,7 +3272,7 @@ SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo) SiS_DisplayOn(SiS_Pr); SiS_SetRegByte(SiS_Pr->SiS_P3c6,0xFF); -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if(SiS_Pr->ChipType >= SIS_315H) { if(SiS_Pr->SiS_IF_DEF_LVDS == 1) { if(!(SiS_IsDualEdge(SiS_Pr))) { @@ -3396,7 +3284,7 @@ SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo) if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) { if(SiS_Pr->ChipType >= SIS_315H) { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if(!SiS_Pr->SiS_ROMNew) { if(SiS_IsVAMode(SiS_Pr)) { SiS_SetRegOR(SiS_Pr->SiS_P3d4,0x35,0x01); @@ -3424,424 +3312,16 @@ SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo) } } -#ifdef SIS_XORG_XF86 - if(pScrn) { - /* SetPitch: Adapt to virtual size & position */ - if((ModeNo > 0x13) && (dosetpitch)) { - SiS_SetPitch(SiS_Pr, pScrn); - } - - /* Backup/Set ModeNo in BIOS scratch area */ - SiS_GetSetModeID(pScrn, ModeNo); - } -#endif - SiS_CloseCRTC(SiS_Pr); SiS_Handle760(SiS_Pr); -#ifdef SIS_LINUX_KERNEL /* We never lock registers in XF86 */ if(KeepLockReg != 0xA1) SiS_SetReg(SiS_Pr->SiS_P3c4,0x05,0x00); -#endif return true; } -/*********************************************/ -/* X.org/XFree86: SiSBIOSSetMode() */ -/* for non-Dual-Head mode */ -/*********************************************/ - -#ifdef SIS_XORG_XF86 -bool -SiSBIOSSetMode(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn, - DisplayModePtr mode, bool IsCustom) -{ - SISPtr pSiS = SISPTR(pScrn); - unsigned short ModeNo = 0; - - SiS_Pr->UseCustomMode = false; - - if((IsCustom) && (SiS_CheckBuildCustomMode(pScrn, mode, pSiS->VBFlags))) { - - xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3, "Setting custom mode %dx%d\n", - SiS_Pr->CHDisplay, - (mode->Flags & V_INTERLACE ? SiS_Pr->CVDisplay * 2 : - (mode->Flags & V_DBLSCAN ? SiS_Pr->CVDisplay / 2 : - SiS_Pr->CVDisplay))); - - } else { - - /* Don't need vbflags here; checks done earlier */ - ModeNo = SiS_GetModeNumber(pScrn, mode, pSiS->VBFlags); - if(!ModeNo) return false; - - xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3, "Setting standard mode 0x%x\n", ModeNo); - - } - - return(SiSSetMode(SiS_Pr, pScrn, ModeNo, true)); -} - -/*********************************************/ -/* X.org/XFree86: SiSBIOSSetModeCRT2() */ -/* for Dual-Head modes */ -/*********************************************/ - -bool -SiSBIOSSetModeCRT2(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn, - DisplayModePtr mode, bool IsCustom) -{ - SISIOADDRESS BaseAddr = SiS_Pr->IOAddress; - SISPtr pSiS = SISPTR(pScrn); -#ifdef SISDUALHEAD - SISEntPtr pSiSEnt = pSiS->entityPrivate; -#endif - unsigned short ModeIdIndex; - unsigned short ModeNo = 0; - unsigned char backupreg = 0; - - SiS_Pr->UseCustomMode = false; - - /* Remember: Custom modes for CRT2 are ONLY supported - * -) on the 30x/B/C, and - * -) if CRT2 is LCD or VGA, or CRT1 is LCDA - */ - - if((IsCustom) && (SiS_CheckBuildCustomMode(pScrn, mode, pSiS->VBFlags))) { - - ModeNo = 0xfe; - - } else { - - ModeNo = SiS_GetModeNumber(pScrn, mode, pSiS->VBFlags); - if(!ModeNo) return false; - - } - - SiSRegInit(SiS_Pr, BaseAddr); - SiSInitPtr(SiS_Pr); - SiS_GetSysFlags(SiS_Pr); -#if defined(i386) || defined(__i386) || defined(__i386__) || defined(__AMD64__) || defined(__amd64__) || defined(__x86_64__) - SiS_Pr->SiS_VGAINFO = SiS_GetSetBIOSScratch(pScrn, 0x489, 0xff); -#else - SiS_Pr->SiS_VGAINFO = 0x11; -#endif - - SiS_SetReg(SiS_Pr->SiS_P3c4,0x05,0x86); - - SiSInitPCIetc(SiS_Pr); - SiSSetLVDSetc(SiS_Pr); - SiSDetermineROMUsage(SiS_Pr); - - /* Save mode info so we can set it from within SetMode for CRT1 */ -#ifdef SISDUALHEAD - if(pSiS->DualHeadMode) { - pSiSEnt->CRT2ModeNo = ModeNo; - pSiSEnt->CRT2DMode = mode; - pSiSEnt->CRT2IsCustom = IsCustom; - pSiSEnt->CRT2CR30 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x30); - pSiSEnt->CRT2CR31 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x31); - pSiSEnt->CRT2CR35 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35); - pSiSEnt->CRT2CR38 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38); -#if 0 - /* We can't set CRT2 mode before CRT1 mode is set - says who...? */ - if(pSiSEnt->CRT1ModeNo == -1) { - xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3, - "Setting CRT2 mode delayed until after setting CRT1 mode\n"); - return true; - } -#endif - pSiSEnt->CRT2ModeSet = true; - } -#endif - - if(SiS_Pr->UseCustomMode) { - - unsigned short temptemp = SiS_Pr->CVDisplay; - - if(SiS_Pr->CModeFlag & DoubleScanMode) temptemp >>= 1; - else if(SiS_Pr->CInfoFlag & InterlaceMode) temptemp <<= 1; - - xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3, - "Setting custom mode %dx%d on CRT2\n", - SiS_Pr->CHDisplay, temptemp); - - } else { - - xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3, - "Setting standard mode 0x%x on CRT2\n", ModeNo); - - } - - SiS_UnLockCRT2(SiS_Pr); - - if(!SiS_Pr->UseCustomMode) { - if(!(SiS_SearchModeID(SiS_Pr, &ModeNo, &ModeIdIndex))) return false; - } else { - ModeIdIndex = 0; - } - - SiS_GetVBType(SiS_Pr); - - SiS_InitVB(SiS_Pr); - if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) { - if(SiS_Pr->ChipType >= SIS_315H) { - SiS_ResetVB(SiS_Pr); - SiS_SetRegOR(SiS_Pr->SiS_P3c4,0x32,0x10); - SiS_SetRegOR(SiS_Pr->SiS_Part2Port,0x00,0x0c); - backupreg = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38); - } else { - backupreg = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35); - } - } - - /* Get VB information (connectors, connected devices) */ - if(!SiS_Pr->UseCustomMode) { - SiS_GetVBInfo(SiS_Pr, ModeNo, ModeIdIndex, 1); - } else { - /* If this is a custom mode, we don't check the modeflag for CRT2Mode */ - SiS_GetVBInfo(SiS_Pr, ModeNo, ModeIdIndex, 0); - } - SiS_SetYPbPr(SiS_Pr); - SiS_SetTVMode(SiS_Pr, ModeNo, ModeIdIndex); - SiS_GetLCDResInfo(SiS_Pr, ModeNo, ModeIdIndex); - SiS_SetLowModeTest(SiS_Pr, ModeNo); - - SiS_ResetSegmentRegisters(SiS_Pr); - - /* Set mode on CRT2 */ - if( (SiS_Pr->SiS_VBType & VB_SISVB) || - (SiS_Pr->SiS_IF_DEF_LVDS == 1) || - (SiS_Pr->SiS_IF_DEF_CH70xx != 0) || - (SiS_Pr->SiS_IF_DEF_TRUMPION != 0) ) { - SiS_SetCRT2Group(SiS_Pr, ModeNo); - } - - SiS_StrangeStuff(SiS_Pr); - - SiS_DisplayOn(SiS_Pr); - SiS_SetRegByte(SiS_Pr->SiS_P3c6,0xFF); - - if(SiS_Pr->ChipType >= SIS_315H) { - if(SiS_Pr->SiS_IF_DEF_LVDS == 1) { - if(!(SiS_IsDualEdge(SiS_Pr))) { - SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x13,0xfb); - } - } - } - - if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) { - if(SiS_Pr->ChipType >= SIS_315H) { - if(!SiS_Pr->SiS_ROMNew) { - if(SiS_IsVAMode(SiS_Pr)) { - SiS_SetRegOR(SiS_Pr->SiS_P3d4,0x35,0x01); - } else { - SiS_SetRegAND(SiS_Pr->SiS_P3d4,0x35,0xFE); - } - } - - SiS_SetReg(SiS_Pr->SiS_P3d4,0x38,backupreg); - - if(SiS_GetReg(SiS_Pr->SiS_P3d4,0x30) & SetCRT2ToLCD) { - SiS_SetRegAND(SiS_Pr->SiS_P3d4,0x38,0xfc); - } - } else if((SiS_Pr->ChipType == SIS_630) || - (SiS_Pr->ChipType == SIS_730)) { - SiS_SetReg(SiS_Pr->SiS_P3d4,0x35,backupreg); - } - } - - /* SetPitch: Adapt to virtual size & position */ - SiS_SetPitchCRT2(SiS_Pr, pScrn); - - SiS_Handle760(SiS_Pr); - - return true; -} - -/*********************************************/ -/* X.org/XFree86: SiSBIOSSetModeCRT1() */ -/* for Dual-Head modes */ -/*********************************************/ - -bool -SiSBIOSSetModeCRT1(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn, - DisplayModePtr mode, bool IsCustom) -{ - SISIOADDRESS BaseAddr = SiS_Pr->IOAddress; - SISPtr pSiS = SISPTR(pScrn); - unsigned short ModeIdIndex, ModeNo = 0; - unsigned char backupreg = 0; -#ifdef SISDUALHEAD - SISEntPtr pSiSEnt = pSiS->entityPrivate; - unsigned char backupcr30, backupcr31, backupcr38, backupcr35, backupp40d=0; - bool backupcustom; -#endif - - SiS_Pr->UseCustomMode = false; - - if((IsCustom) && (SiS_CheckBuildCustomMode(pScrn, mode, pSiS->VBFlags))) { - - unsigned short temptemp = SiS_Pr->CVDisplay; - - if(SiS_Pr->CModeFlag & DoubleScanMode) temptemp >>= 1; - else if(SiS_Pr->CInfoFlag & InterlaceMode) temptemp <<= 1; - - xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3, - "Setting custom mode %dx%d on CRT1\n", - SiS_Pr->CHDisplay, temptemp); - ModeNo = 0xfe; - - } else { - - ModeNo = SiS_GetModeNumber(pScrn, mode, 0); /* don't give VBFlags */ - if(!ModeNo) return false; - - xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3, - "Setting standard mode 0x%x on CRT1\n", ModeNo); - } - - SiSInitPtr(SiS_Pr); - SiSRegInit(SiS_Pr, BaseAddr); - SiS_GetSysFlags(SiS_Pr); -#if defined(i386) || defined(__i386) || defined(__i386__) || defined(__AMD64__) || defined(__amd64__) || defined(__x86_64__) - SiS_Pr->SiS_VGAINFO = SiS_GetSetBIOSScratch(pScrn, 0x489, 0xff); -#else - SiS_Pr->SiS_VGAINFO = 0x11; -#endif - - SiS_SetReg(SiS_Pr->SiS_P3c4,0x05,0x86); - - SiSInitPCIetc(SiS_Pr); - SiSSetLVDSetc(SiS_Pr); - SiSDetermineROMUsage(SiS_Pr); - - SiS_UnLockCRT2(SiS_Pr); - - if(!SiS_Pr->UseCustomMode) { - if(!(SiS_SearchModeID(SiS_Pr, &ModeNo, &ModeIdIndex))) return false; - } else { - ModeIdIndex = 0; - } - - /* Determine VBType */ - SiS_GetVBType(SiS_Pr); - - SiS_InitVB(SiS_Pr); - if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) { - if(SiS_Pr->ChipType >= SIS_315H) { - backupreg = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38); - } else { - backupreg = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35); - } - } - - /* Get VB information (connectors, connected devices) */ - /* (We don't care if the current mode is a CRT2 mode) */ - SiS_GetVBInfo(SiS_Pr, ModeNo, ModeIdIndex, 0); - SiS_SetYPbPr(SiS_Pr); - SiS_SetTVMode(SiS_Pr, ModeNo, ModeIdIndex); - SiS_GetLCDResInfo(SiS_Pr, ModeNo, ModeIdIndex); - SiS_SetLowModeTest(SiS_Pr, ModeNo); - - SiS_OpenCRTC(SiS_Pr); - - /* Set mode on CRT1 */ - SiS_SetCRT1Group(SiS_Pr, ModeNo, ModeIdIndex); - if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) { - SiS_SetCRT2Group(SiS_Pr, ModeNo); - } - - /* SetPitch: Adapt to virtual size & position */ - SiS_SetPitchCRT1(SiS_Pr, pScrn); - - SiS_HandleCRT1(SiS_Pr); - - SiS_StrangeStuff(SiS_Pr); - - SiS_CloseCRTC(SiS_Pr); - -#ifdef SISDUALHEAD - if(pSiS->DualHeadMode) { - pSiSEnt->CRT1ModeNo = ModeNo; - pSiSEnt->CRT1DMode = mode; - } -#endif - - if(SiS_Pr->UseCustomMode) { - SiS_Pr->CRT1UsesCustomMode = true; - SiS_Pr->CSRClock_CRT1 = SiS_Pr->CSRClock; - SiS_Pr->CModeFlag_CRT1 = SiS_Pr->CModeFlag; - } else { - SiS_Pr->CRT1UsesCustomMode = false; - } - - /* Reset CRT2 if changing mode on CRT1 */ -#ifdef SISDUALHEAD - if(pSiS->DualHeadMode) { - if(pSiSEnt->CRT2ModeNo != -1) { - xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3, - "(Re-)Setting mode for CRT2\n"); - backupcustom = SiS_Pr->UseCustomMode; - backupcr30 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x30); - backupcr31 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x31); - backupcr35 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35); - backupcr38 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38); - if(SiS_Pr->SiS_VBType & VB_SISVB) { - /* Backup LUT-enable */ - if(pSiSEnt->CRT2ModeSet) { - backupp40d = SiS_GetReg(SiS_Pr->SiS_Part4Port,0x0d) & 0x08; - } - } - if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) { - SiS_SetReg(SiS_Pr->SiS_P3d4,0x30,pSiSEnt->CRT2CR30); - SiS_SetReg(SiS_Pr->SiS_P3d4,0x31,pSiSEnt->CRT2CR31); - SiS_SetReg(SiS_Pr->SiS_P3d4,0x35,pSiSEnt->CRT2CR35); - SiS_SetReg(SiS_Pr->SiS_P3d4,0x38,pSiSEnt->CRT2CR38); - } - - SiSBIOSSetModeCRT2(SiS_Pr, pSiSEnt->pScrn_1, - pSiSEnt->CRT2DMode, pSiSEnt->CRT2IsCustom); - - SiS_SetReg(SiS_Pr->SiS_P3d4,0x30,backupcr30); - SiS_SetReg(SiS_Pr->SiS_P3d4,0x31,backupcr31); - SiS_SetReg(SiS_Pr->SiS_P3d4,0x35,backupcr35); - SiS_SetReg(SiS_Pr->SiS_P3d4,0x38,backupcr38); - if(SiS_Pr->SiS_VBType & VB_SISVB) { - SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x0d, ~0x08, backupp40d); - } - SiS_Pr->UseCustomMode = backupcustom; - } - } -#endif - - /* Warning: From here, the custom mode entries in SiS_Pr are - * possibly overwritten - */ - - SiS_DisplayOn(SiS_Pr); - SiS_SetRegByte(SiS_Pr->SiS_P3c6,0xFF); - - if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) { - if(SiS_Pr->ChipType >= SIS_315H) { - SiS_SetReg(SiS_Pr->SiS_P3d4,0x38,backupreg); - } else if((SiS_Pr->ChipType == SIS_630) || - (SiS_Pr->ChipType == SIS_730)) { - SiS_SetReg(SiS_Pr->SiS_P3d4,0x35,backupreg); - } - } - - SiS_Handle760(SiS_Pr); - - /* Backup/Set ModeNo in BIOS scratch area */ - SiS_GetSetModeID(pScrn,ModeNo); - - return true; -} -#endif /* Linux_XF86 */ - #ifndef GETBITSTR #define BITMASK(h,l) (((unsigned)(1U << ((h)-(l)+1))-1)<<(l)) #define GENMASK(mask) BITMASK(1?mask,0?mask) @@ -3927,7 +3407,7 @@ SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short ModeNo, SiS_Pr->CVBlankStart = SiS_Pr->SiS_VGAVDE; if(SiS_Pr->ChipType < SIS_315H) { -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 tempbx = SiS_Pr->SiS_VGAHT; if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) { tempbx = SiS_Pr->PanelHT; @@ -3936,7 +3416,7 @@ SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short ModeNo, remaining = tempbx % 8; #endif } else { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 /* OK for LCDA, LVDS */ tempbx = SiS_Pr->PanelHT - SiS_Pr->PanelXRes; tempax = SiS_Pr->SiS_VGAHDE; /* not /2 ! */ @@ -3950,7 +3430,7 @@ SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short ModeNo, SiS_Pr->CHTotal = SiS_Pr->CHBlankEnd = tempbx; if(SiS_Pr->ChipType < SIS_315H) { -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 if(SiS_Pr->SiS_VGAHDE == SiS_Pr->PanelXRes) { SiS_Pr->CHSyncStart = SiS_Pr->SiS_VGAHDE + ((SiS_Pr->PanelHRS + 1) & ~1); SiS_Pr->CHSyncEnd = SiS_Pr->CHSyncStart + SiS_Pr->PanelHRE; @@ -3982,7 +3462,7 @@ SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short ModeNo, } #endif } else { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 tempax = VGAHDE; if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) { tempbx = SiS_Pr->PanelXRes; @@ -4001,7 +3481,7 @@ SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short ModeNo, if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) { tempax = SiS_Pr->PanelYRes; } else if(SiS_Pr->ChipType < SIS_315H) { -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 /* Stupid hack for 640x400/320x200 */ if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) { if((tempax + tempbx) == 438) tempbx += 16; @@ -4054,36 +3534,12 @@ SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short ModeNo, if(modeflag & DoubleScanMode) tempax |= 0x80; SiS_SetRegANDOR(SiS_Pr->SiS_P3d4,0x09,0x5F,tempax); -#ifdef SIS_XORG_XF86 -#ifdef TWDEBUG - xf86DrvMsg(0, X_INFO, "%d %d %d %d %d %d %d %d (%d %d %d %d)\n", - SiS_Pr->CHDisplay, SiS_Pr->CHSyncStart, SiS_Pr->CHSyncEnd, SiS_Pr->CHTotal, - SiS_Pr->CVDisplay, SiS_Pr->CVSyncStart, SiS_Pr->CVSyncEnd, SiS_Pr->CVTotal, - SiS_Pr->CHBlankStart, SiS_Pr->CHBlankEnd, SiS_Pr->CVBlankStart, SiS_Pr->CVBlankEnd); - xf86DrvMsg(0, X_INFO, " {{0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,\n", - SiS_Pr->CCRT1CRTC[0], SiS_Pr->CCRT1CRTC[1], - SiS_Pr->CCRT1CRTC[2], SiS_Pr->CCRT1CRTC[3], - SiS_Pr->CCRT1CRTC[4], SiS_Pr->CCRT1CRTC[5], - SiS_Pr->CCRT1CRTC[6], SiS_Pr->CCRT1CRTC[7]); - xf86DrvMsg(0, X_INFO, " 0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,\n", - SiS_Pr->CCRT1CRTC[8], SiS_Pr->CCRT1CRTC[9], - SiS_Pr->CCRT1CRTC[10], SiS_Pr->CCRT1CRTC[11], - SiS_Pr->CCRT1CRTC[12], SiS_Pr->CCRT1CRTC[13], - SiS_Pr->CCRT1CRTC[14], SiS_Pr->CCRT1CRTC[15]); - xf86DrvMsg(0, X_INFO, " 0x%02x}},\n", SiS_Pr->CCRT1CRTC[16]); -#endif -#endif } void SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata, int xres, int yres, -#ifdef SIS_XORG_XF86 - DisplayModePtr current -#endif -#ifdef SIS_LINUX_KERNEL struct fb_var_screeninfo *var, bool writeres -#endif ) { unsigned short HRE, HBE, HRS, HBS, HDE, HT; @@ -4127,25 +3583,10 @@ SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata, D = B - F - C; -#ifdef SIS_XORG_XF86 - current->HDisplay = (E * 8); - current->HSyncStart = (E * 8) + (F * 8); - current->HSyncEnd = (E * 8) + (F * 8) + (C * 8); - current->HTotal = (E * 8) + (F * 8) + (C * 8) + (D * 8); -#ifdef TWDEBUG - xf86DrvMsg(0, X_INFO, - "H: A %d B %d C %d D %d E %d F %d HT %d HDE %d HRS %d HBS %d HBE %d HRE %d\n", - A, B, C, D, E, F, HT, HDE, HRS, HBS, HBE, HRE); -#else - (void)VBS; (void)HBS; (void)A; -#endif -#endif -#ifdef SIS_LINUX_KERNEL if(writeres) var->xres = xres = E * 8; var->left_margin = D * 8; var->right_margin = F * 8; var->hsync_len = C * 8; -#endif /* Vertical */ sr_data = crdata[13]; @@ -4192,30 +3633,10 @@ SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata, D = B - F - C; -#ifdef SIS_XORG_XF86 - current->VDisplay = VDE + 1; - current->VSyncStart = VRS + 1; - current->VSyncEnd = ((VRS & ~0x1f) | VRE) + 1; - if(VRE <= (VRS & 0x1f)) current->VSyncEnd += 32; - current->VTotal = E + D + C + F; -#if 0 - current->VDisplay = E; - current->VSyncStart = E + D; - current->VSyncEnd = E + D + C; - current->VTotal = E + D + C + F; -#endif -#ifdef TWDEBUG - xf86DrvMsg(0, X_INFO, - "V: A %d B %d C %d D %d E %d F %d VT %d VDE %d VRS %d VBS %d VBE %d VRE %d\n", - A, B, C, D, E, F, VT, VDE, VRS, VBS, VBE, VRE); -#endif -#endif -#ifdef SIS_LINUX_KERNEL if(writeres) var->yres = yres = E; var->upper_margin = D; var->lower_margin = F; var->vsync_len = C; -#endif if((xres == 320) && ((yres == 200) || (yres == 240))) { /* Terrible hack, but correct CRTC data for @@ -4224,17 +3645,9 @@ SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata, * a negative D. The CRT controller does not * seem to like correcting HRE to 50) */ -#ifdef SIS_XORG_XF86 - current->HDisplay = 320; - current->HSyncStart = 328; - current->HSyncEnd = 376; - current->HTotal = 400; -#endif -#ifdef SIS_LINUX_KERNEL var->left_margin = (400 - 376); var->right_margin = (328 - 320); var->hsync_len = (376 - 328); -#endif } diff --git a/drivers/video/sis/init.h b/drivers/video/sis/init.h index b96005c39c67..ee8ed3c203da 100644 --- a/drivers/video/sis/init.h +++ b/drivers/video/sis/init.h @@ -53,21 +53,8 @@ #ifndef _INIT_H_ #define _INIT_H_ -#include "osdef.h" #include "initdef.h" -#ifdef SIS_XORG_XF86 -#include "sis.h" -#define SIS_NEED_inSISREG -#define SIS_NEED_inSISREGW -#define SIS_NEED_inSISREGL -#define SIS_NEED_outSISREG -#define SIS_NEED_outSISREGW -#define SIS_NEED_outSISREGL -#include "sis_regs.h" -#endif - -#ifdef SIS_LINUX_KERNEL #include "vgatypes.h" #include "vstruct.h" #ifdef SIS_CP @@ -78,7 +65,6 @@ #include <linux/fb.h> #include "sis.h" #include <video/sisfb.h> -#endif /* Mode numbers */ static const unsigned short ModeIndex_320x200[] = {0x59, 0x41, 0x00, 0x4f}; @@ -286,7 +272,7 @@ static const struct SiS_ModeResInfo_S SiS_ModeResInfo[] = { 1280, 854, 8,16} /* 0x22 */ }; -#if defined(SIS300) || defined(SIS315H) +#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315) static const struct SiS_StandTable_S SiS_StandTable[]= { /* 0x00: MD_0_200 */ @@ -1521,10 +1507,6 @@ static const struct SiS_LVDSCRT1Data SiS_LVDSCRT1640x480_1_H[] = }; bool SiSInitPtr(struct SiS_Private *SiS_Pr); -#ifdef SIS_XORG_XF86 -unsigned short SiS_GetModeID(int VGAEngine, unsigned int VBFlags, int HDisplay, int VDisplay, - int Depth, bool FSTN, int LCDwith, int LCDheight); -#endif unsigned short SiS_GetModeID_LCD(int VGAEngine, unsigned int VBFlags, int HDisplay, int VDisplay, int Depth, bool FSTN, unsigned short CustomT, int LCDwith, int LCDheight, @@ -1550,17 +1532,11 @@ void SiS_SetRegOR(SISIOADDRESS Port,unsigned short Index, unsigned short DataOR void SiS_DisplayOn(struct SiS_Private *SiS_Pr); void SiS_DisplayOff(struct SiS_Private *SiS_Pr); void SiSRegInit(struct SiS_Private *SiS_Pr, SISIOADDRESS BaseAddr); -#ifndef SIS_LINUX_KERNEL -void SiSSetLVDSetc(struct SiS_Private *SiS_Pr); -#endif void SiS_SetEnableDstn(struct SiS_Private *SiS_Pr, int enable); void SiS_SetEnableFstn(struct SiS_Private *SiS_Pr, int enable); unsigned short SiS_GetModeFlag(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex); bool SiSDetermineROMLayout661(struct SiS_Private *SiS_Pr); -#ifndef SIS_LINUX_KERNEL -void SiS_GetVBType(struct SiS_Private *SiS_Pr); -#endif bool SiS_SearchModeID(struct SiS_Private *SiS_Pr, unsigned short *ModeNo, unsigned short *ModeIdIndex); @@ -1572,37 +1548,19 @@ unsigned short SiS_GetColorDepth(struct SiS_Private *SiS_Pr, unsigned short Mode unsigned short ModeIdIndex); unsigned short SiS_GetOffset(struct SiS_Private *SiS_Pr,unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RRTI); -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 void SiS_GetFIFOThresholdIndex300(struct SiS_Private *SiS_Pr, unsigned short *idx1, unsigned short *idx2); unsigned short SiS_GetFIFOThresholdB300(unsigned short idx1, unsigned short idx2); unsigned short SiS_GetLatencyFactor630(struct SiS_Private *SiS_Pr, unsigned short index); #endif void SiS_LoadDAC(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex); -#ifdef SIS_XORG_XF86 -bool SiSSetMode(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn, unsigned short ModeNo, - bool dosetpitch); -bool SiSBIOSSetMode(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn, - DisplayModePtr mode, bool IsCustom); -bool SiSBIOSSetModeCRT2(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn, - DisplayModePtr mode, bool IsCustom); -bool SiSBIOSSetModeCRT1(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn, - DisplayModePtr mode, bool IsCustom); -#endif -#ifdef SIS_LINUX_KERNEL bool SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo); -#endif void SiS_CalcCRRegisters(struct SiS_Private *SiS_Pr, int depth); void SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex); -#ifdef SIS_XORG_XF86 -void SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata, int xres, - int yres, DisplayModePtr current); -#endif -#ifdef SIS_LINUX_KERNEL void SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata, int xres, int yres, struct fb_var_screeninfo *var, bool writeres); -#endif /* From init301.c: */ extern void SiS_GetVBInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, @@ -1626,29 +1584,16 @@ extern unsigned short SiS_GetVCLK2Ptr(struct SiS_Private *SiS_Pr, unsigned short extern bool SiS_IsVAMode(struct SiS_Private *); extern bool SiS_IsDualEdge(struct SiS_Private *); -#ifdef SIS_XORG_XF86 -/* From other modules: */ -extern unsigned short SiS_CheckBuildCustomMode(ScrnInfoPtr pScrn, DisplayModePtr mode, - unsigned int VBFlags); -extern unsigned char SiS_GetSetBIOSScratch(ScrnInfoPtr pScrn, unsigned short offset, - unsigned char value); -extern unsigned char SiS_GetSetModeID(ScrnInfoPtr pScrn, unsigned char id); -extern unsigned short SiS_GetModeNumber(ScrnInfoPtr pScrn, DisplayModePtr mode, - unsigned int VBFlags); -#endif - -#ifdef SIS_LINUX_KERNEL -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 extern unsigned int sisfb_read_nbridge_pci_dword(struct SiS_Private *SiS_Pr, int reg); extern void sisfb_write_nbridge_pci_dword(struct SiS_Private *SiS_Pr, int reg, unsigned int val); #endif -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 extern void sisfb_write_nbridge_pci_byte(struct SiS_Private *SiS_Pr, int reg, unsigned char val); extern unsigned int sisfb_read_mio_pci_word(struct SiS_Private *SiS_Pr, int reg); #endif -#endif #endif diff --git a/drivers/video/sis/init301.c b/drivers/video/sis/init301.c index da33d801c22e..9fa66fd4052a 100644 --- a/drivers/video/sis/init301.c +++ b/drivers/video/sis/init301.c @@ -75,11 +75,11 @@ #include "init301.h" -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 #include "oem300.h" #endif -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 #include "oem310.h" #endif @@ -87,9 +87,7 @@ #define SiS_I2CDELAYSHORT 150 static unsigned short SiS_GetBIOSLCDResInfo(struct SiS_Private *SiS_Pr); -#ifdef SIS_LINUX_KERNEL static void SiS_SetCH70xx(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned char val); -#endif /*********************************************/ /* HELPER: Lock/Unlock CRT2 */ @@ -106,9 +104,7 @@ SiS_UnLockCRT2(struct SiS_Private *SiS_Pr) SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x24,0x01); } -#ifdef SIS_LINUX_KERNEL static -#endif void SiS_LockCRT2(struct SiS_Private *SiS_Pr) { @@ -138,7 +134,7 @@ SiS_SetRegSR11ANDOR(struct SiS_Private *SiS_Pr, unsigned short DataAND, unsigned /* HELPER: Get Pointer to LCD structure */ /*********************************************/ -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 static unsigned char * GetLCDStructPtr661(struct SiS_Private *SiS_Pr) { @@ -404,7 +400,7 @@ SiS_SaveCRT2Info(struct SiS_Private *SiS_Pr, unsigned short ModeNo) /* HELPER: GET SOME DATA FROM BIOS ROM */ /*********************************************/ -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 static bool SiS_CR36BIOSWord23b(struct SiS_Private *SiS_Pr) { @@ -449,7 +445,7 @@ SiS_DDC2Delay(struct SiS_Private *SiS_Pr, unsigned int delaytime) SiS_GetReg(SiS_Pr->SiS_P3c4, 0x05); } -#if defined(SIS300) || defined(SIS315H) +#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315) static void SiS_GenericDelay(struct SiS_Private *SiS_Pr, unsigned short delay) { @@ -457,7 +453,7 @@ SiS_GenericDelay(struct SiS_Private *SiS_Pr, unsigned short delay) } #endif -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 static void SiS_LongDelay(struct SiS_Private *SiS_Pr, unsigned short delay) { @@ -467,7 +463,7 @@ SiS_LongDelay(struct SiS_Private *SiS_Pr, unsigned short delay) } #endif -#if defined(SIS300) || defined(SIS315H) +#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315) static void SiS_ShortDelay(struct SiS_Private *SiS_Pr, unsigned short delay) { @@ -480,14 +476,14 @@ SiS_ShortDelay(struct SiS_Private *SiS_Pr, unsigned short delay) static void SiS_PanelDelay(struct SiS_Private *SiS_Pr, unsigned short DelayTime) { -#if defined(SIS300) || defined(SIS315H) +#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315) unsigned char *ROMAddr = SiS_Pr->VirtualRomBase; unsigned short PanelID, DelayIndex, Delay=0; #endif if(SiS_Pr->ChipType < SIS_315H) { -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 PanelID = SiS_GetReg(SiS_Pr->SiS_P3d4,0x36); if(SiS_Pr->SiS_VBType & VB_SISVB) { @@ -513,11 +509,11 @@ SiS_PanelDelay(struct SiS_Private *SiS_Pr, unsigned short DelayTime) } SiS_ShortDelay(SiS_Pr, Delay); -#endif /* SIS300 */ +#endif /* CONFIG_FB_SIS_300 */ } else { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if((SiS_Pr->ChipType >= SIS_661) || (SiS_Pr->ChipType <= SIS_315PRO) || @@ -579,12 +575,12 @@ SiS_PanelDelay(struct SiS_Private *SiS_Pr, unsigned short DelayTime) } -#endif /* SIS315H */ +#endif /* CONFIG_FB_SIS_315 */ } } -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 static void SiS_PanelDelayLoop(struct SiS_Private *SiS_Pr, unsigned short DelayTime, unsigned short DelayLoop) { @@ -613,7 +609,7 @@ SiS_WaitRetrace1(struct SiS_Private *SiS_Pr) while((!(SiS_GetRegByte(SiS_Pr->SiS_P3da) & 0x08)) && --watchdog); } -#if defined(SIS300) || defined(SIS315H) +#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315) static void SiS_WaitRetrace2(struct SiS_Private *SiS_Pr, unsigned short reg) { @@ -630,7 +626,7 @@ static void SiS_WaitVBRetrace(struct SiS_Private *SiS_Pr) { if(SiS_Pr->ChipType < SIS_315H) { -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) { if(!(SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0x20)) return; } @@ -641,7 +637,7 @@ SiS_WaitVBRetrace(struct SiS_Private *SiS_Pr) } #endif } else { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if(!(SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0x40)) { SiS_WaitRetrace1(SiS_Pr); } else { @@ -686,7 +682,7 @@ SiS_VBLongWait(struct SiS_Private *SiS_Pr) /* HELPER: MISC */ /*********************************************/ -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 static bool SiS_Is301B(struct SiS_Private *SiS_Pr) { @@ -708,7 +704,7 @@ SiS_CRT2IsLCD(struct SiS_Private *SiS_Pr) bool SiS_IsDualEdge(struct SiS_Private *SiS_Pr) { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if(SiS_Pr->ChipType >= SIS_315H) { if((SiS_Pr->ChipType != SIS_650) || (SiS_GetReg(SiS_Pr->SiS_P3d4,0x5f) & 0xf0)) { if(SiS_GetReg(SiS_Pr->SiS_P3d4,0x38) & EnableDualEdge) return true; @@ -721,7 +717,7 @@ SiS_IsDualEdge(struct SiS_Private *SiS_Pr) bool SiS_IsVAMode(struct SiS_Private *SiS_Pr) { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 unsigned short flag; if(SiS_Pr->ChipType >= SIS_315H) { @@ -732,7 +728,7 @@ SiS_IsVAMode(struct SiS_Private *SiS_Pr) return false; } -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 static bool SiS_IsVAorLCD(struct SiS_Private *SiS_Pr) { @@ -745,7 +741,7 @@ SiS_IsVAorLCD(struct SiS_Private *SiS_Pr) static bool SiS_IsDualLink(struct SiS_Private *SiS_Pr) { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if(SiS_Pr->ChipType >= SIS_315H) { if((SiS_CRT2IsLCD(SiS_Pr)) || (SiS_IsVAMode(SiS_Pr))) { @@ -756,7 +752,7 @@ SiS_IsDualLink(struct SiS_Private *SiS_Pr) return false; } -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 static bool SiS_TVEnabled(struct SiS_Private *SiS_Pr) { @@ -768,7 +764,7 @@ SiS_TVEnabled(struct SiS_Private *SiS_Pr) } #endif -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 static bool SiS_LCDAEnabled(struct SiS_Private *SiS_Pr) { @@ -777,7 +773,7 @@ SiS_LCDAEnabled(struct SiS_Private *SiS_Pr) } #endif -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 static bool SiS_WeHaveBacklightCtrl(struct SiS_Private *SiS_Pr) { @@ -788,7 +784,7 @@ SiS_WeHaveBacklightCtrl(struct SiS_Private *SiS_Pr) } #endif -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 static bool SiS_IsNotM650orLater(struct SiS_Private *SiS_Pr) { @@ -804,7 +800,7 @@ SiS_IsNotM650orLater(struct SiS_Private *SiS_Pr) } #endif -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 static bool SiS_IsYPbPr(struct SiS_Private *SiS_Pr) { @@ -816,7 +812,7 @@ SiS_IsYPbPr(struct SiS_Private *SiS_Pr) } #endif -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 static bool SiS_IsChScart(struct SiS_Private *SiS_Pr) { @@ -828,7 +824,7 @@ SiS_IsChScart(struct SiS_Private *SiS_Pr) } #endif -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 static bool SiS_IsTVOrYPbPrOrScart(struct SiS_Private *SiS_Pr) { @@ -848,7 +844,7 @@ SiS_IsTVOrYPbPrOrScart(struct SiS_Private *SiS_Pr) } #endif -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 static bool SiS_IsLCDOrLCDA(struct SiS_Private *SiS_Pr) { @@ -914,7 +910,7 @@ SiS_BridgeInSlavemode(struct SiS_Private *SiS_Pr) /*********************************************/ /* Setup general purpose IO for Chrontel communication */ -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 void SiS_SetChrontelGPIO(struct SiS_Private *SiS_Pr, unsigned short myvbinfo) { @@ -923,11 +919,7 @@ SiS_SetChrontelGPIO(struct SiS_Private *SiS_Pr, unsigned short myvbinfo) if(!(SiS_Pr->SiS_ChSW)) return; -#ifdef SIS_LINUX_KERNEL acpibase = sisfb_read_lpc_pci_dword(SiS_Pr, 0x74); -#else - acpibase = pciReadLong(0x00000800, 0x74); -#endif acpibase &= 0xFFFF; if(!acpibase) return; temp = SiS_GetRegShort((acpibase + 0x3c)); /* ACPI register 0x3c: GP Event 1 I/O mode select */ @@ -969,7 +961,7 @@ SiS_GetVBInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, tempax &= (DriverMode | LoadDACFlag | SetNotSimuMode | SetPALTV); tempbx |= tempax; -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if(SiS_Pr->ChipType >= SIS_315H) { if(SiS_Pr->SiS_VBType & VB_SISLCDA) { if(ModeNo == 0x03) { @@ -1019,7 +1011,7 @@ SiS_GetVBInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, } } -#endif /* SIS315H */ +#endif /* CONFIG_FB_SIS_315 */ if(!(SiS_Pr->SiS_VBType & VB_SISVGA2)) { tempbx &= ~(SetCRT2ToRAMDAC); @@ -1154,24 +1146,16 @@ SiS_GetVBInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, SiS_Pr->SiS_VBInfo = tempbx; -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 if(SiS_Pr->ChipType == SIS_630) { SiS_SetChrontelGPIO(SiS_Pr, SiS_Pr->SiS_VBInfo); } #endif -#ifdef SIS_LINUX_KERNEL #if 0 printk(KERN_DEBUG "sisfb: (init301: VBInfo= 0x%04x, SetFlag=0x%04x)\n", SiS_Pr->SiS_VBInfo, SiS_Pr->SiS_SetFlag); #endif -#endif -#ifdef SIS_XORG_XF86 -#ifdef TWDEBUG - xf86DrvMsg(0, X_PROBED, "(init301: VBInfo=0x%04x, SetFlag=0x%04x)\n", - SiS_Pr->SiS_VBInfo, SiS_Pr->SiS_SetFlag); -#endif -#endif } /*********************************************/ @@ -1415,12 +1399,6 @@ SiS_SetTVMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short } SiS_Pr->SiS_VBInfo &= ~SetPALTV; - -#ifdef SIS_XORG_XF86 -#ifdef TWDEBUG - xf86DrvMsg(0, X_INFO, "(init301: TVMode %x, VBInfo %x)\n", SiS_Pr->SiS_TVMode, SiS_Pr->SiS_VBInfo); -#endif -#endif } /*********************************************/ @@ -1443,22 +1421,10 @@ SiS_GetBIOSLCDResInfo(struct SiS_Private *SiS_Pr) static void SiS_GetLCDInfoBIOS(struct SiS_Private *SiS_Pr) { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 unsigned char *ROMAddr; unsigned short temp; -#ifdef SIS_XORG_XF86 -#ifdef TWDEBUG - xf86DrvMsg(0, X_INFO, "Paneldata driver: [%d %d] [H %d %d] [V %d %d] [C %d 0x%02x 0x%02x]\n", - SiS_Pr->PanelHT, SiS_Pr->PanelVT, - SiS_Pr->PanelHRS, SiS_Pr->PanelHRE, - SiS_Pr->PanelVRS, SiS_Pr->PanelVRE, - SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].CLOCK, - SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_A, - SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_B); -#endif -#endif - if((ROMAddr = GetLCDStructPtr661(SiS_Pr))) { if((temp = SISGETROMW(6)) != SiS_Pr->PanelHT) { SiS_Pr->SiS_NeedRomModeData = true; @@ -1480,18 +1446,6 @@ SiS_GetLCDInfoBIOS(struct SiS_Private *SiS_Pr) SiS_Pr->SiS_VCLKData[VCLK_CUSTOM_315].SR2C = SiS_Pr->SiS_VBVCLKData[VCLK_CUSTOM_315].Part4_B = ROMAddr[20]; -#ifdef SIS_XORG_XF86 -#ifdef TWDEBUG - xf86DrvMsg(0, X_INFO, "Paneldata BIOS: [%d %d] [H %d %d] [V %d %d] [C %d 0x%02x 0x%02x]\n", - SiS_Pr->PanelHT, SiS_Pr->PanelVT, - SiS_Pr->PanelHRS, SiS_Pr->PanelHRE, - SiS_Pr->PanelVRS, SiS_Pr->PanelVRE, - SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].CLOCK, - SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_A, - SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_B); -#endif -#endif - } #endif } @@ -1517,13 +1471,13 @@ SiS_GetLCDResInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sh { unsigned short temp,modeflag,resinfo=0,modexres=0,modeyres=0; bool panelcanscale = false; -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 unsigned char *ROMAddr = SiS_Pr->VirtualRomBase; static const unsigned char SiS300SeriesLCDRes[] = { 0, 1, 2, 3, 7, 4, 5, 8, 0, 0, 10, 0, 0, 0, 0, 15 }; #endif -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 unsigned char *myptr = NULL; #endif @@ -1562,7 +1516,7 @@ SiS_GetLCDResInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sh SiS_Pr->SiS_LCDTypeInfo = (temp & 0x0F) - 1; } temp &= 0x0f; -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 if(SiS_Pr->ChipType < SIS_315H) { /* Very old BIOSes only know 7 sizes (NetVista 2179, 1.01g) */ if(SiS_Pr->SiS_VBType & VB_SIS301) { @@ -1574,7 +1528,7 @@ SiS_GetLCDResInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sh #endif /* Translate to our internal types */ -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if(SiS_Pr->ChipType == SIS_550) { if (temp == Panel310_1152x768) temp = Panel_320x240_2; /* Verified working */ else if(temp == Panel310_320x240_2) temp = Panel_320x240_2; @@ -1597,7 +1551,7 @@ SiS_GetLCDResInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sh SiS_Pr->SiS_LCDResInfo = temp; -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 if(SiS_Pr->SiS_IF_DEF_LVDS == 1) { if(SiS_Pr->SiS_CustomT == CUT_BARCO1366) { SiS_Pr->SiS_LCDResInfo = Panel_Barco1366; @@ -1639,7 +1593,7 @@ SiS_GetLCDResInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sh else if(SiS_Pr->UsePanelScaler == 1) SiS_Pr->SiS_LCDInfo |= DontExpandLCD; /* Dual link, Pass 1:1 BIOS default, etc. */ -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if(SiS_Pr->ChipType >= SIS_661) { if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) { if(temp & 0x08) SiS_Pr->SiS_LCDInfo |= LCDPass11; @@ -2076,7 +2030,7 @@ SiS_GetLCDResInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sh } } -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 if(SiS_Pr->SiS_IF_DEF_LVDS == 1) { if(SiS_Pr->SiS_CustomT == CUT_PANEL848 || SiS_Pr->SiS_CustomT == CUT_PANEL856) { SiS_Pr->SiS_LCDInfo = 0x80 | 0x40 | 0x20; /* neg h/v sync, RGB24(D0 = 0) */ @@ -2186,17 +2140,10 @@ SiS_GetLCDResInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sh SiS_Pr->SiS_SetFlag |= LCDVESATiming; } -#ifdef SIS_LINUX_KERNEL #if 0 printk(KERN_DEBUG "sisfb: (LCDInfo=0x%04x LCDResInfo=0x%02x LCDTypeInfo=0x%02x)\n", SiS_Pr->SiS_LCDInfo, SiS_Pr->SiS_LCDResInfo, SiS_Pr->SiS_LCDTypeInfo); #endif -#endif -#ifdef SIS_XORG_XF86 - xf86DrvMsgVerb(0, X_PROBED, 4, - "(init301: LCDInfo=0x%04x LCDResInfo=0x%02x LCDTypeInfo=0x%02x SetFlag=0x%04x)\n", - SiS_Pr->SiS_LCDInfo, SiS_Pr->SiS_LCDResInfo, SiS_Pr->SiS_LCDTypeInfo, SiS_Pr->SiS_SetFlag); -#endif } /*********************************************/ @@ -2359,7 +2306,7 @@ SiS_GetVCLK2Ptr(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned shor VCLKIndex = SiS_Pr->PanelVCLKIdx315; } -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 /* Special Timing: Barco iQ Pro R series */ if(SiS_Pr->SiS_CustomT == CUT_BARCO1366) VCLKIndex = 0x44; @@ -2410,12 +2357,6 @@ SiS_GetVCLK2Ptr(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned shor } -#ifdef SIS_XORG_XF86 -#ifdef TWDEBUG - xf86DrvMsg(0, X_INFO, "VCLKIndex %d (0x%x)\n", VCLKIndex, VCLKIndex); -#endif -#endif - return VCLKIndex; } @@ -2428,10 +2369,10 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned { unsigned short i, j, modeflag, tempah=0; short tempcl; -#if defined(SIS300) || defined(SIS315H) +#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315) unsigned short tempbl; #endif -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 unsigned char *ROMAddr = SiS_Pr->VirtualRomBase; unsigned short tempah2, tempbl2; #endif @@ -2454,7 +2395,7 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned if(SiS_Pr->ChipType < SIS_315H) { -#ifdef SIS300 /* ---- 300 series ---- */ +#ifdef CONFIG_FB_SIS_300 /* ---- 300 series ---- */ /* For 301BDH: (with LCD via LVDS) */ if(SiS_Pr->SiS_VBType & VB_NoLCD) { @@ -2477,11 +2418,11 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) tempah ^= 0xA0; -#endif /* SIS300 */ +#endif /* CONFIG_FB_SIS_300 */ } else { -#ifdef SIS315H /* ------- 315/330 series ------ */ +#ifdef CONFIG_FB_SIS_315 /* ------- 315/330 series ------ */ if(ModeNo > 0x13) { tempcl -= ModeVGA; @@ -2494,7 +2435,7 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) tempah ^= 0x50; -#endif /* SIS315H */ +#endif /* CONFIG_FB_SIS_315 */ } @@ -2503,7 +2444,7 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned if(SiS_Pr->ChipType < SIS_315H) { SiS_SetReg(SiS_Pr->SiS_Part1Port,0x00,tempah); } else { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if(SiS_Pr->SiS_IF_DEF_LVDS == 1) { SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x00,0xa0,tempah); } else if(SiS_Pr->SiS_VBType & VB_SISVB) { @@ -2584,7 +2525,7 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned if(SiS_Pr->ChipType >= SIS_315H) { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 /* LVDS can only be slave in 8bpp modes */ tempah = 0x80; if((modeflag & CRT2Mode) && (SiS_Pr->SiS_ModeType > ModeVGA)) { @@ -2604,7 +2545,7 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned } else { -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 tempah = 0; if( (!(SiS_Pr->SiS_VBInfo & SetInSlaveMode)) && (SiS_Pr->SiS_ModeType > ModeVGA) ) { tempah |= 0x02; @@ -2626,7 +2567,7 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned if(SiS_Pr->ChipType >= SIS_315H) { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 /* unsigned char bridgerev = SiS_GetReg(SiS_Pr->SiS_Part4Port,0x01); */ /* The following is nearly unpreditable and varies from machine @@ -2718,11 +2659,11 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x23,tempbl,tempah); } -#endif /* SIS315H */ +#endif /* CONFIG_FB_SIS_315 */ } else if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) { -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x21,0x3f); if((SiS_Pr->SiS_VBInfo & DisableCRT2Display) || @@ -2745,7 +2686,7 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned } else { /* LVDS */ -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if(SiS_Pr->ChipType >= SIS_315H) { if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) { @@ -2931,7 +2872,7 @@ SiS_GetCRT2Ptr(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short } } -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if(SiS_Pr->SiS_CustomT == CUT_COMPAQ1280) { if(SiS_Pr->SiS_LCDResInfo == Panel_1280x1024) { if(!(SiS_Pr->SiS_LCDInfo & DontExpandLCD)) { @@ -3036,7 +2977,7 @@ SiS_GetCRT2Ptr(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short case Panel_1280x1024: tempbx = 24; break; case Panel_1400x1050: tempbx = 26; break; case Panel_1600x1200: tempbx = 28; break; -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 case Panel_Barco1366: tempbx = 80; break; #endif } @@ -3053,7 +2994,7 @@ SiS_GetCRT2Ptr(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short if(SiS_Pr->SiS_LCDInfo & LCDPass11) tempbx = 30; -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 if(SiS_Pr->SiS_CustomT == CUT_BARCO1024) { tempbx = 82; if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) tempbx++; @@ -3189,7 +3130,7 @@ SiS_GetCRT2DataLVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned if((SiS_Pr->SiS_VBType & VB_SISVB) && (SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA)) { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 SiS_CalcPanelLinkTiming(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex); SiS_CalcLCDACRT1Timing(SiS_Pr, ModeNo, ModeIdIndex); #endif @@ -3214,7 +3155,7 @@ SiS_GetCRT2DataLVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned case 16: LVDSData = SiS_Pr->SiS_LVDS800x600Data_1; break; case 18: LVDSData = SiS_Pr->SiS_LVDS1024x600Data_1; break; case 20: LVDSData = SiS_Pr->SiS_LVDS1024x768Data_1; break; -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 case 80: LVDSData = SiS_Pr->SiS_LVDSBARCO1366Data_1; break; case 81: LVDSData = SiS_Pr->SiS_LVDSBARCO1366Data_2; break; case 82: LVDSData = SiS_Pr->SiS_LVDSBARCO1024Data_1; break; @@ -3248,7 +3189,7 @@ SiS_GetCRT2DataLVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned (SiS_Pr->SiS_SetFlag & SetDOSMode) ) { SiS_Pr->SiS_HDE = SiS_Pr->PanelXRes; SiS_Pr->SiS_VDE = SiS_Pr->PanelYRes; -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 if(SiS_Pr->SiS_CustomT == CUT_BARCO1366) { if(ResIndex < 0x08) { SiS_Pr->SiS_HDE = 1280; @@ -3270,7 +3211,7 @@ SiS_GetCRT2Data301(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s unsigned short resinfo, CRT2Index, ResIndex; const struct SiS_LCDData *LCDPtr = NULL; const struct SiS_TVData *TVPtr = NULL; -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 short resinfo661; #endif @@ -3283,7 +3224,7 @@ SiS_GetCRT2Data301(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s } else { modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag; resinfo = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_RESINFO; -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 resinfo661 = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].ROMMODEIDX661; if( (SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) && (SiS_Pr->SiS_SetFlag & LCDVESATiming) && @@ -3460,7 +3401,7 @@ SiS_GetCRT2Data301(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s } else if( (!(SiS_Pr->SiS_LCDInfo & DontExpandLCD)) && (romptr) && (ROMAddr) ) { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 SiS_Pr->SiS_RVBHCMAX = ROMAddr[romptr]; SiS_Pr->SiS_RVBHCFACT = ROMAddr[romptr+1]; SiS_Pr->SiS_VGAHT = ROMAddr[romptr+2] | ((ROMAddr[romptr+3] & 0x0f) << 8); @@ -3520,19 +3461,13 @@ SiS_GetCRT2Data301(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s case Panel_1680x1050 : case Panel_1680x1050 + 32: LCDPtr = SiS_Pr->SiS_LCD1680x1050Data; break; case 100 : LCDPtr = SiS_Pr->SiS_NoScaleData; break; -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 case 200 : LCDPtr = SiS310_ExtCompaq1280x1024Data; break; case 201 : LCDPtr = SiS_Pr->SiS_St2LCD1280x1024Data; break; #endif default : LCDPtr = SiS_Pr->SiS_ExtLCD1024x768Data; break; } -#ifdef SIS_XORG_XF86 -#ifdef TWDEBUG - xf86DrvMsg(0, X_INFO, "GetCRT2Data: Index %d ResIndex %d\n", CRT2Index, ResIndex); -#endif -#endif - SiS_Pr->SiS_RVBHCMAX = (LCDPtr+ResIndex)->RVBHCMAX; SiS_Pr->SiS_RVBHCFACT = (LCDPtr+ResIndex)->RVBHCFACT; SiS_Pr->SiS_VGAHT = (LCDPtr+ResIndex)->VGAHT; @@ -3624,7 +3559,7 @@ SiS_GetLVDSDesPtr(struct SiS_Private *SiS_Pr) { const struct SiS_LVDSDes *PanelDesPtr = NULL; -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) { if(SiS_Pr->ChipType < SIS_315H) { @@ -3696,7 +3631,7 @@ SiS_GetLVDSDesData(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s if((SiS_Pr->SiS_VBType & VB_SIS30xBLV) && (SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA)) { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) { /* non-pass 1:1 only, see above */ if(SiS_Pr->SiS_VGAHDE != SiS_Pr->PanelXRes) { @@ -3771,7 +3706,7 @@ SiS_GetLVDSDesData(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s } else { if(SiS_Pr->ChipType < SIS_315H) { -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 switch(SiS_Pr->SiS_LCDResInfo) { case Panel_800x600: if(SiS_Pr->SiS_VGAVDE == SiS_Pr->PanelYRes) { @@ -3816,7 +3751,7 @@ SiS_GetLVDSDesData(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s } #endif } else { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 switch(SiS_Pr->SiS_LCDResInfo) { case Panel_1024x768: case Panel_1280x1024: @@ -3844,7 +3779,7 @@ SiS_GetLVDSDesData(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s if(SiS_Pr->ChipType < SIS_315H) { if(!(modeflag & HalfDCLK)) SiS_Pr->SiS_LCDHDES = 320; } else { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) SiS_Pr->SiS_LCDHDES = 480; if(SiS_Pr->SiS_LCDResInfo == Panel_1400x1050) SiS_Pr->SiS_LCDHDES = 804; if(SiS_Pr->SiS_LCDResInfo == Panel_1600x1200) SiS_Pr->SiS_LCDHDES = 704; @@ -3866,7 +3801,7 @@ SiS_GetLVDSDesData(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s /* DISABLE VIDEO BRIDGE */ /*********************************************/ -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 static int SiS_HandlePWD(struct SiS_Private *SiS_Pr) { @@ -3891,11 +3826,6 @@ SiS_HandlePWD(struct SiS_Private *SiS_Pr) ret = 1; } SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x27,0x7f,temp); -#ifdef SIS_XORG_XF86 -#ifdef TWDEBUG - xf86DrvMsg(0, 0, "Setting PWD %x\n", temp); -#endif -#endif } #endif return ret; @@ -3909,7 +3839,7 @@ SiS_HandlePWD(struct SiS_Private *SiS_Pr) void SiS_DisableBridge(struct SiS_Private *SiS_Pr) { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 unsigned short tempah, pushax=0, modenum; #endif unsigned short temp=0; @@ -3920,7 +3850,7 @@ SiS_DisableBridge(struct SiS_Private *SiS_Pr) if(SiS_Pr->ChipType < SIS_315H) { -#ifdef SIS300 /* 300 series */ +#ifdef CONFIG_FB_SIS_300 /* 300 series */ if(!(SiS_CR36BIOSWord23b(SiS_Pr))) { if(SiS_Pr->SiS_VBType & VB_SISLVDS) { @@ -3953,11 +3883,11 @@ SiS_DisableBridge(struct SiS_Private *SiS_Pr) } } -#endif /* SIS300 */ +#endif /* CONFIG_FB_SIS_300 */ } else { -#ifdef SIS315H /* 315 series */ +#ifdef CONFIG_FB_SIS_315 /* 315 series */ int didpwd = 0; bool custom1 = (SiS_Pr->SiS_CustomT == CUT_COMPAQ1280) || @@ -4081,14 +4011,14 @@ SiS_DisableBridge(struct SiS_Private *SiS_Pr) } -#endif /* SIS315H */ +#endif /* CONFIG_FB_SIS_315 */ } } else { /* ============ For 301 ================ */ if(SiS_Pr->ChipType < SIS_315H) { -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 if(!(SiS_CR36BIOSWord23b(SiS_Pr))) { SiS_SetRegSR11ANDOR(SiS_Pr,0xF7,0x08); SiS_PanelDelay(SiS_Pr, 3); @@ -4111,7 +4041,7 @@ SiS_DisableBridge(struct SiS_Private *SiS_Pr) SiS_SetRegOR(SiS_Pr->SiS_P3c4,0x1E,0x20); SiS_SetReg(SiS_Pr->SiS_Part1Port,0x00,temp); } else { -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 SiS_SetRegAND(SiS_Pr->SiS_P3c4,0x1E,0xDF); /* disable CRT2 */ if( (!(SiS_CRT2IsLCD(SiS_Pr))) || (!(SiS_CR36BIOSWord23d(SiS_Pr))) ) { @@ -4127,7 +4057,7 @@ SiS_DisableBridge(struct SiS_Private *SiS_Pr) if(SiS_Pr->ChipType < SIS_315H) { -#ifdef SIS300 /* 300 series */ +#ifdef CONFIG_FB_SIS_300 /* 300 series */ if(SiS_Pr->SiS_IF_DEF_CH70xx == 1) { SiS_SetCH700x(SiS_Pr,0x0E,0x09); @@ -4171,11 +4101,11 @@ SiS_DisableBridge(struct SiS_Private *SiS_Pr) SiS_SetRegSR11ANDOR(SiS_Pr,0xFB,0x04); } -#endif /* SIS300 */ +#endif /* CONFIG_FB_SIS_300 */ } else { -#ifdef SIS315H /* 315 series */ +#ifdef CONFIG_FB_SIS_315 /* 315 series */ if(!(SiS_IsNotM650orLater(SiS_Pr))) { /*if(SiS_Pr->ChipType < SIS_340) { */ /* XGI needs this */ @@ -4288,7 +4218,7 @@ SiS_DisableBridge(struct SiS_Private *SiS_Pr) } } -#endif /* SIS315H */ +#endif /* CONFIG_FB_SIS_315 */ } /* 315 series */ @@ -4304,14 +4234,12 @@ SiS_DisableBridge(struct SiS_Private *SiS_Pr) * from outside the context of a mode switch! * MUST call getVBType before calling this */ -#ifdef SIS_LINUX_KERNEL static -#endif void SiS_EnableBridge(struct SiS_Private *SiS_Pr) { unsigned short temp=0, tempah; -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 unsigned short temp1, pushax=0; bool delaylong = false; #endif @@ -4322,7 +4250,7 @@ SiS_EnableBridge(struct SiS_Private *SiS_Pr) if(SiS_Pr->ChipType < SIS_315H) { -#ifdef SIS300 /* 300 series */ +#ifdef CONFIG_FB_SIS_300 /* 300 series */ if(SiS_CRT2IsLCD(SiS_Pr)) { if(SiS_Pr->SiS_VBType & VB_SISLVDS) { @@ -4385,11 +4313,11 @@ SiS_EnableBridge(struct SiS_Private *SiS_Pr) } -#endif /* SIS300 */ +#endif /* CONFIG_FB_SIS_300 */ } else { -#ifdef SIS315H /* 315 series */ +#ifdef CONFIG_FB_SIS_315 /* 315 series */ #ifdef SET_EMI unsigned char r30=0, r31=0, r32=0, r33=0, cr36=0; @@ -4688,7 +4616,7 @@ SiS_EnableBridge(struct SiS_Private *SiS_Pr) SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x00,0x7f); } -#endif /* SIS315H */ +#endif /* CONFIG_FB_SIS_315 */ } @@ -4739,7 +4667,7 @@ SiS_EnableBridge(struct SiS_Private *SiS_Pr) if(SiS_Pr->ChipType < SIS_315H) { -#ifdef SIS300 /* 300 series */ +#ifdef CONFIG_FB_SIS_300 /* 300 series */ if(SiS_CRT2IsLCD(SiS_Pr)) { if(SiS_Pr->ChipType == SIS_730) { @@ -4783,11 +4711,11 @@ SiS_EnableBridge(struct SiS_Private *SiS_Pr) } } -#endif /* SIS300 */ +#endif /* CONFIG_FB_SIS_300 */ } else { -#ifdef SIS315H /* 315 series */ +#ifdef CONFIG_FB_SIS_315 /* 315 series */ if(!(SiS_IsNotM650orLater(SiS_Pr))) { /*if(SiS_Pr->ChipType < SIS_340) {*/ /* XGI needs this */ @@ -4881,7 +4809,7 @@ SiS_EnableBridge(struct SiS_Private *SiS_Pr) } } -#endif /* SIS315H */ +#endif /* CONFIG_FB_SIS_315 */ } /* 310 series */ @@ -4971,7 +4899,7 @@ SiS_SetCRT2Sync(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned shor if(SiS_Pr->ChipType < SIS_315H) { -#ifdef SIS300 /* ---- 300 series --- */ +#ifdef CONFIG_FB_SIS_300 /* ---- 300 series --- */ if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) { /* 630 - 301B(-DH) */ @@ -5000,11 +4928,11 @@ SiS_SetCRT2Sync(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned shor } -#endif /* SIS300 */ +#endif /* CONFIG_FB_SIS_300 */ } else { -#ifdef SIS315H /* ------- 315 series ------ */ +#ifdef CONFIG_FB_SIS_315 /* ------- 315 series ------ */ if(SiS_Pr->SiS_VBType & VB_SISLVDS) { /* 315 - LVDS */ @@ -5076,13 +5004,13 @@ SiS_SetCRT2Sync(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned shor } } -#endif /* SIS315H */ +#endif /* CONFIG_FB_SIS_315 */ } } } /* Set CRT2 FIFO on 300/540/630/730 */ -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 static void SiS_SetCRT2FIFO_300(struct SiS_Private *SiS_Pr,unsigned short ModeNo) { @@ -5154,13 +5082,8 @@ SiS_SetCRT2FIFO_300(struct SiS_Private *SiS_Pr,unsigned short ModeNo) } else { -#ifdef SIS_LINUX_KERNEL pci50 = sisfb_read_nbridge_pci_dword(SiS_Pr, 0x50); pciA0 = sisfb_read_nbridge_pci_dword(SiS_Pr, 0xa0); -#else - pci50 = pciReadLong(0x00000000, 0x50); - pciA0 = pciReadLong(0x00000000, 0xA0); -#endif if(SiS_Pr->ChipType == SIS_730) { @@ -5262,7 +5185,7 @@ SiS_SetCRT2FIFO_300(struct SiS_Private *SiS_Pr,unsigned short ModeNo) #endif /* Set CRT2 FIFO on 315/330 series */ -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 static void SiS_SetCRT2FIFO_310(struct SiS_Private *SiS_Pr) { @@ -5420,27 +5343,6 @@ SiS_SetGroup1_301(struct SiS_Private *SiS_Pr, unsigned short ModeNo,unsigned sho temp = SiS_GetRegByte((SiS_Pr->SiS_P3ca+0x02)); SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1b,temp); /* ? */ - -#ifdef SIS_XORG_XF86 -#ifdef TWDEBUG - xf86DrvMsg(0, X_INFO, "%d %d %d %d %d %d %d %d (%d %d %d %d)\n", - SiS_Pr->CHDisplay, SiS_Pr->CHSyncStart, SiS_Pr->CHSyncEnd, SiS_Pr->CHTotal, - SiS_Pr->CVDisplay, SiS_Pr->CVSyncStart, SiS_Pr->CVSyncEnd, SiS_Pr->CVTotal, - SiS_Pr->CHBlankStart, SiS_Pr->CHBlankEnd, SiS_Pr->CVBlankStart, SiS_Pr->CVBlankEnd); - - xf86DrvMsg(0, X_INFO, " {{0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,\n", - SiS_Pr->CCRT1CRTC[0], SiS_Pr->CCRT1CRTC[1], - SiS_Pr->CCRT1CRTC[2], SiS_Pr->CCRT1CRTC[3], - SiS_Pr->CCRT1CRTC[4], SiS_Pr->CCRT1CRTC[5], - SiS_Pr->CCRT1CRTC[6], SiS_Pr->CCRT1CRTC[7]); - xf86DrvMsg(0, X_INFO, " 0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,\n", - SiS_Pr->CCRT1CRTC[8], SiS_Pr->CCRT1CRTC[9], - SiS_Pr->CCRT1CRTC[10], SiS_Pr->CCRT1CRTC[11], - SiS_Pr->CCRT1CRTC[12], SiS_Pr->CCRT1CRTC[13], - SiS_Pr->CCRT1CRTC[14], SiS_Pr->CCRT1CRTC[15]); - xf86DrvMsg(0, X_INFO, " 0x%02x}},\n", SiS_Pr->CCRT1CRTC[16]); -#endif -#endif } /* Setup panel link @@ -5455,17 +5357,17 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s unsigned short push2, tempax, tempbx, tempcx, temp; unsigned int tempeax = 0, tempebx, tempecx, tempvcfact = 0; bool islvds = false, issis = false, chkdclkfirst = false; -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 unsigned short crt2crtc = 0; #endif -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 unsigned short pushcx; #endif if(ModeNo <= 0x13) { modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag; resinfo = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ResInfo; -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 crt2crtc = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_CRT2CRTC; #endif } else if(SiS_Pr->UseCustomMode) { @@ -5473,7 +5375,7 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s } else { modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag; resinfo = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_RESINFO; -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 crt2crtc = SiS_Pr->SiS_RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC; #endif } @@ -5494,7 +5396,7 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s } } -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if((SiS_Pr->ChipType >= SIS_315H) && (SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA)) { if(IS_SIS330) { SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2D,0x10); @@ -5744,7 +5646,7 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s if(SiS_Pr->ChipType < SIS_315H) { -#ifdef SIS300 /* 300 series */ +#ifdef CONFIG_FB_SIS_300 /* 300 series */ tempeax = SiS_Pr->SiS_VGAVDE << 6; temp = (tempeax % (unsigned int)SiS_Pr->SiS_VDE); tempeax = tempeax / (unsigned int)SiS_Pr->SiS_VDE; @@ -5755,11 +5657,11 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s temp = (unsigned short)(tempeax & 0x00FF); SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1E,temp); /* BPLVCFACT */ tempvcfact = temp; -#endif /* SIS300 */ +#endif /* CONFIG_FB_SIS_300 */ } else { -#ifdef SIS315H /* 315 series */ +#ifdef CONFIG_FB_SIS_315 /* 315 series */ tempeax = SiS_Pr->SiS_VGAVDE << 18; tempebx = SiS_Pr->SiS_VDE; temp = (tempeax % tempebx); @@ -5845,7 +5747,7 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s temp = (unsigned short)(tempecx & 0x00FF); SiS_SetReg(SiS_Pr->SiS_Part1Port,0x23,temp); -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if(SiS_Pr->ChipType >= SIS_315H) { if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) { if((islvds) || (SiS_Pr->SiS_VBInfo & VB_SISLVDS)) { @@ -5863,7 +5765,7 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s } #endif -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 if(SiS_Pr->SiS_IF_DEF_TRUMPION) { unsigned char *ROMAddr = SiS_Pr->VirtualRomBase; unsigned char *trumpdata; @@ -5899,7 +5801,7 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s } #endif -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if(SiS_Pr->SiS_IF_DEF_FSTN || SiS_Pr->SiS_IF_DEF_DSTN) { SiS_SetReg(SiS_Pr->SiS_Part1Port,0x25,0x00); SiS_SetReg(SiS_Pr->SiS_Part1Port,0x26,0x00); @@ -5999,7 +5901,7 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s SiS_SetReg(SiS_Pr->SiS_Part1Port,0x45,0x0a); } } -#endif /* SIS315H */ +#endif /* CONFIG_FB_SIS_315 */ } /* Set Part 1 */ @@ -6007,12 +5909,12 @@ static void SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex) { -#if defined(SIS300) || defined(SIS315H) +#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315) unsigned char *ROMAddr = SiS_Pr->VirtualRomBase; #endif unsigned short temp=0, tempax=0, tempbx=0, tempcx=0, bridgeadd=0; unsigned short pushbx=0, CRT1Index=0, modeflag, resinfo=0; -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 unsigned short tempbl=0; #endif @@ -6038,11 +5940,11 @@ SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short (SiS_Pr->SiS_VBInfo & SetInSlaveMode)) ) { if(SiS_Pr->ChipType < SIS_315H ) { -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 SiS_SetCRT2FIFO_300(SiS_Pr, ModeNo); #endif } else { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 SiS_SetCRT2FIFO_310(SiS_Pr); #endif } @@ -6051,7 +5953,7 @@ SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short if(SiS_Pr->ChipType < SIS_315H ) { -#ifdef SIS300 /* ------------- 300 series --------------*/ +#ifdef CONFIG_FB_SIS_300 /* ------------- 300 series --------------*/ temp = (SiS_Pr->SiS_VGAHT - 1) & 0x0FF; /* BTVGA2HT 0x08,0x09 */ SiS_SetReg(SiS_Pr->SiS_Part1Port,0x08,temp); /* CRT2 Horizontal Total */ @@ -6070,11 +5972,11 @@ SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short bridgeadd = 12; -#endif /* SIS300 */ +#endif /* CONFIG_FB_SIS_300 */ } else { -#ifdef SIS315H /* ------------------- 315/330 series --------------- */ +#ifdef CONFIG_FB_SIS_315 /* ------------------- 315/330 series --------------- */ tempcx = SiS_Pr->SiS_VGAHT; /* BTVGA2HT 0x08,0x09 */ if(modeflag & HalfDCLK) { @@ -6125,7 +6027,7 @@ SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short } } -#endif /* SIS315H */ +#endif /* CONFIG_FB_SIS_315 */ } /* 315/330 series */ @@ -6256,7 +6158,7 @@ SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short if(SiS_Pr->ChipType < SIS_315H) { -#ifdef SIS300 /* ---------- 300 series -------------- */ +#ifdef CONFIG_FB_SIS_300 /* ---------- 300 series -------------- */ if(SiS_Pr->SiS_VBType & VB_SISVB) { temp = 0x20; @@ -6310,11 +6212,11 @@ SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x13,~0x3C,temp); /* Panel Link Delay Compensation; (Software Command Reset; Power Saving) */ -#endif /* SIS300 */ +#endif /* CONFIG_FB_SIS_300 */ } else { -#ifdef SIS315H /* --------------- 315/330 series ---------------*/ +#ifdef CONFIG_FB_SIS_315 /* --------------- 315/330 series ---------------*/ if(SiS_Pr->ChipType < SIS_661) { @@ -6349,7 +6251,7 @@ SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short if(modeflag & HalfDCLK) tempax |= 0x40; SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x2C,0x3f,tempax); -#endif /* SIS315H */ +#endif /* CONFIG_FB_SIS_315 */ } @@ -6381,7 +6283,7 @@ SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short /* SET PART 2 REGISTER GROUP */ /*********************************************/ -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 static unsigned char * SiS_GetGroup2CLVXPtr(struct SiS_Private *SiS_Pr, int tabletype) { @@ -6478,7 +6380,7 @@ SiS_GetCRT2Part2Ptr(struct SiS_Private *SiS_Pr,unsigned short ModeNo,unsigned sh } #endif -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 static void SiS_Group2LCDSpecial(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short crt2crtc) { @@ -6690,7 +6592,7 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short unsigned int longtemp, PhaseIndex; bool newtvphase; const unsigned char *TimingPoint; -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 unsigned short resindex, CRT2Index; const struct SiS_Part2PortTbl *CRT2Part2Ptr = NULL; @@ -7069,7 +6971,7 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short SiS_SetRegAND(SiS_Pr->SiS_Part2Port,0x17,0xFB); SiS_SetRegAND(SiS_Pr->SiS_Part2Port,0x18,0xDF); -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if(SiS_GetCRT2Part2Ptr(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex, &CRT2Index, &resindex)) { switch(CRT2Index) { @@ -7130,12 +7032,6 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short /* Non-expanding: lcdvdes = tempcx = VT-1; lcdvdee = tempbx = VDE-1 */ -#ifdef SIS_XORG_XF86 -#ifdef TWDEBUG - xf86DrvMsg(0, X_INFO, "lcdvdes 0x%x lcdvdee 0x%x\n", tempcx, tempbx); -#endif -#endif - SiS_SetReg(SiS_Pr->SiS_Part2Port,0x05,tempcx); /* lcdvdes */ SiS_SetReg(SiS_Pr->SiS_Part2Port,0x06,tempbx); /* lcdvdee */ @@ -7184,12 +7080,6 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short tempbx = SiS_Pr->CVSyncStart; } -#ifdef SIS_XORG_XF86 -#ifdef TWDEBUG - xf86DrvMsg(0, X_INFO, "lcdvrs 0x%x\n", tempbx); -#endif -#endif - SiS_SetReg(SiS_Pr->SiS_Part2Port,0x04,tempbx); /* lcdvrs */ temp = (tempbx >> 4) & 0xF0; @@ -7201,15 +7091,9 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short temp |= (SiS_Pr->CVSyncEnd & 0x0f); } -#ifdef SIS_XORG_XF86 -#ifdef TWDEBUG - xf86DrvMsg(0, X_INFO, "lcdvre[3:0] 0x%x\n", (temp & 0x0f)); -#endif -#endif - SiS_SetReg(SiS_Pr->SiS_Part2Port,0x01,temp); -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 SiS_Group2LCDSpecial(SiS_Pr, ModeNo, crt2crtc); #endif @@ -7245,12 +7129,6 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short tempax >>= 1; } -#ifdef SIS_XORG_XF86 -#ifdef TWDEBUG - xf86DrvMsg(0, X_INFO, "lcdhdee 0x%x\n", tempbx); -#endif -#endif - tempbx += bridgeoffset; SiS_SetReg(SiS_Pr->SiS_Part2Port,0x23,tempbx); /* lcdhdee */ @@ -7276,12 +7154,6 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short tempbx += bridgeoffset; } -#ifdef SIS_XORG_XF86 -#ifdef TWDEBUG - xf86DrvMsg(0, X_INFO, "lcdhrs 0x%x\n", tempbx); -#endif -#endif - SiS_SetReg(SiS_Pr->SiS_Part2Port,0x1C,tempbx); /* lcdhrs */ SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x1D,0x0F,((tempbx >> 4) & 0xf0)); @@ -7300,20 +7172,14 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short tempbx += bridgeoffset; } -#ifdef SIS_XORG_XF86 -#ifdef TWDEBUG - xf86DrvMsg(0, X_INFO, "lcdhre 0x%x\n", tempbx); -#endif -#endif - SiS_SetReg(SiS_Pr->SiS_Part2Port,0x21,tempbx); /* lcdhre */ SiS_SetGroup2_Tail(SiS_Pr, ModeNo); -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 SiS_Set300Part2Regs(SiS_Pr, ModeIdIndex, RefreshRateTableIndex, ModeNo); #endif -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 } /* CRT2-LCD from table */ #endif } @@ -7382,7 +7248,7 @@ SiS_SetGroup3(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short /* SET PART 4 REGISTER GROUP */ /*********************************************/ -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 #if 0 static void SiS_ShiftXPos(struct SiS_Private *SiS_Pr, int shift) @@ -8011,7 +7877,7 @@ SiS_SetCHTVReg(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short if(SiS_Pr->SiS_IF_DEF_CH70xx == 1) { -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 /* Chrontel 7005 - I assume that it does not come with a 315 series chip */ @@ -8124,7 +7990,7 @@ SiS_SetCHTVReg(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short /* Chrontel 7019 - assumed that it does not come with a 300 series chip */ -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 unsigned short temp; @@ -8175,7 +8041,7 @@ SiS_SetCHTVReg(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short } -#ifdef SIS315H /* ----------- 315 series only ---------- */ +#ifdef CONFIG_FB_SIS_315 /* ----------- 315 series only ---------- */ void SiS_Chrontel701xBLOn(struct SiS_Private *SiS_Pr) @@ -8657,7 +8523,7 @@ SiS_ChrontelDoSomething1(struct SiS_Private *SiS_Pr) bool SiS_SetCRT2Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo) { -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 unsigned char *ROMAddr = SiS_Pr->VirtualRomBase; #endif unsigned short ModeIdIndex, RefreshRateTableIndex; @@ -8703,16 +8569,6 @@ SiS_SetCRT2Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo) SiS_GetLVDSDesData(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex); } -#ifdef SIS_XORG_XF86 -#ifdef TWDEBUG - xf86DrvMsg(0, X_INFO, "(init301: LCDHDES 0x%03x LCDVDES 0x%03x)\n", SiS_Pr->SiS_LCDHDES, SiS_Pr->SiS_LCDVDES); - xf86DrvMsg(0, X_INFO, "(init301: HDE 0x%03x VDE 0x%03x)\n", SiS_Pr->SiS_HDE, SiS_Pr->SiS_VDE); - xf86DrvMsg(0, X_INFO, "(init301: VGAHDE 0x%03x VGAVDE 0x%03x)\n", SiS_Pr->SiS_VGAHDE, SiS_Pr->SiS_VGAVDE); - xf86DrvMsg(0, X_INFO, "(init301: HT 0x%03x VT 0x%03x)\n", SiS_Pr->SiS_HT, SiS_Pr->SiS_VT); - xf86DrvMsg(0, X_INFO, "(init301: VGAHT 0x%03x VGAVT 0x%03x)\n", SiS_Pr->SiS_VGAHT, SiS_Pr->SiS_VGAVT); -#endif -#endif - if(SiS_Pr->SiS_SetFlag & LowModeTests) { SiS_SetGroup1(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex); } @@ -8722,12 +8578,12 @@ SiS_SetCRT2Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo) if(SiS_Pr->SiS_SetFlag & LowModeTests) { SiS_SetGroup2(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex); -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 SiS_SetGroup2_C_ELV(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex); #endif SiS_SetGroup3(SiS_Pr, ModeNo, ModeIdIndex); SiS_SetGroup4(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex); -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 SiS_SetGroup4_C_ELV(SiS_Pr, ModeNo, ModeIdIndex); #endif SiS_SetGroup5(SiS_Pr, ModeNo, ModeIdIndex); @@ -8758,7 +8614,7 @@ SiS_SetCRT2Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo) if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) { if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) { if(SiS_Pr->SiS_IF_DEF_CH70xx == 2) { -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 SiS_SetCH701xForLCD(SiS_Pr); #endif } @@ -8771,7 +8627,7 @@ SiS_SetCRT2Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo) } -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 if(SiS_Pr->ChipType < SIS_315H) { if(SiS_Pr->SiS_SetFlag & LowModeTests) { if(SiS_Pr->SiS_UseOEM) { @@ -8794,7 +8650,7 @@ SiS_SetCRT2Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo) } #endif -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 if(SiS_Pr->ChipType >= SIS_315H) { if(SiS_Pr->SiS_SetFlag & LowModeTests) { if(SiS_Pr->ChipType < SIS_661) { @@ -8873,7 +8729,7 @@ SiS_SetupDDCN(struct SiS_Private *SiS_Pr) } } -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 static unsigned char * SiS_SetTrumpBlockLoop(struct SiS_Private *SiS_Pr, unsigned char *dataptr) { @@ -8923,11 +8779,6 @@ SiS_SetTrumpionBlock(struct SiS_Private *SiS_Pr, unsigned char *dataptr) dataptr = SiS_SetTrumpBlockLoop(SiS_Pr, dataptr); if(!dataptr) return false; } -#ifdef SIS_XORG_XF86 -#ifdef TWDEBUG - xf86DrvMsg(0, X_INFO, "Trumpion block success\n"); -#endif -#endif return true; } #endif @@ -9002,9 +8853,7 @@ SiS_SetCH701x(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned char val) SiS_SetChReg(SiS_Pr, reg, val, 0); } -#ifdef SIS_LINUX_KERNEL static -#endif void SiS_SetCH70xx(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned char val) { @@ -9091,9 +8940,7 @@ SiS_GetCH701x(struct SiS_Private *SiS_Pr, unsigned short tempbx) /* Read from Chrontel 70xx */ /* Parameter is [Register no (S7-S0)] */ -#ifdef SIS_LINUX_KERNEL static -#endif unsigned short SiS_GetCH70xx(struct SiS_Private *SiS_Pr, unsigned short tempbx) { @@ -9114,9 +8961,7 @@ SiS_SetCH70xxANDOR(struct SiS_Private *SiS_Pr, unsigned short reg, } /* Our own DDC functions */ -#ifndef SIS_XORG_XF86 static -#endif unsigned short SiS_InitDDCRegs(struct SiS_Private *SiS_Pr, unsigned int VBFlags, int VGAEngine, unsigned short adaptnum, unsigned short DDCdatatype, bool checkcr32, @@ -9224,12 +9069,6 @@ SiS_InitDDCRegs(struct SiS_Private *SiS_Pr, unsigned int VBFlags, int VGAEngine, SiS_SetupDDCN(SiS_Pr); -#ifdef SIS_XORG_XF86 -#ifdef TWDEBUG - xf86DrvMsg(0, X_INFO, "DDC Port %x Index %x Shift %d\n", - SiS_Pr->SiS_DDC_Port, SiS_Pr->SiS_DDC_Index, temp); -#endif -#endif return 0; } @@ -9292,11 +9131,6 @@ SiS_DoProbeDDC(struct SiS_Private *SiS_Pr) SiS_SetSwitchDDC2(SiS_Pr); if(SiS_PrepareDDC(SiS_Pr)) { SiS_SetStop(SiS_Pr); -#ifdef SIS_XORG_XF86 -#ifdef TWDEBUG - xf86DrvMsg(0, X_INFO, "Probe: Prepare failed\n"); -#endif -#endif return 0xFFFF; } mask = 0xf0; @@ -9310,11 +9144,6 @@ SiS_DoProbeDDC(struct SiS_Private *SiS_Pr) } else { failed = true; ret = 0xFFFF; -#ifdef SIS_XORG_XF86 -#ifdef TWDEBUG - xf86DrvMsg(0, X_INFO, "Probe: Read 1 failed\n"); -#endif -#endif } } if(!failed) { @@ -9324,11 +9153,6 @@ SiS_DoProbeDDC(struct SiS_Private *SiS_Pr) if(temp == value) ret = 0; else { ret = 0xFFFF; -#ifdef SIS_XORG_XF86 -#ifdef TWDEBUG - xf86DrvMsg(0, X_INFO, "Probe: Read 2 failed\n"); -#endif -#endif if(SiS_Pr->SiS_DDC_DeviceAddr == 0xa0) { if(temp == 0x30) ret = 0; } @@ -9338,9 +9162,7 @@ SiS_DoProbeDDC(struct SiS_Private *SiS_Pr) return ret; } -#ifndef SIS_XORG_XF86 static -#endif unsigned short SiS_ProbeDDC(struct SiS_Private *SiS_Pr) { @@ -9357,9 +9179,7 @@ SiS_ProbeDDC(struct SiS_Private *SiS_Pr) return flag; } -#ifndef SIS_XORG_XF86 static -#endif unsigned short SiS_ReadDDC(struct SiS_Private *SiS_Pr, unsigned short DDCdatatype, unsigned char *buffer) { @@ -9606,11 +9426,6 @@ SiS_SetSCLKHigh(struct SiS_Private *SiS_Pr) temp = SiS_GetReg(SiS_Pr->SiS_DDC_Port,SiS_Pr->SiS_DDC_Index); } while((!(temp & SiS_Pr->SiS_DDC_Clk)) && --watchdog); if (!watchdog) { -#ifdef SIS_XORG_XF86 -#ifdef TWDEBUG - xf86DrvMsg(0, X_INFO, "SetClkHigh failed\n"); -#endif -#endif return 0xFFFF; } SiS_DDC2Delay(SiS_Pr,SiS_I2CDELAYSHORT); @@ -9641,7 +9456,7 @@ SiS_CheckACK(struct SiS_Private *SiS_Pr) /* =============== SiS 315/330 O.E.M. ================= */ -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 static unsigned short GetRAMDACromptr(struct SiS_Private *SiS_Pr) @@ -10829,7 +10644,7 @@ SiS_FinalizeLCD(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned shor /* ================= SiS 300 O.E.M. ================== */ -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 static void SetOEMLCDData2(struct SiS_Private *SiS_Pr, unsigned short ModeNo,unsigned short ModeIdIndex, diff --git a/drivers/video/sis/init301.h b/drivers/video/sis/init301.h index 51d99222375d..e1fd31d0fddf 100644 --- a/drivers/video/sis/init301.h +++ b/drivers/video/sis/init301.h @@ -53,15 +53,8 @@ #ifndef _INIT301_H_ #define _INIT301_H_ -#include "osdef.h" #include "initdef.h" -#ifdef SIS_XORG_XF86 -#include "sis.h" -#include "sis_regs.h" -#endif - -#ifdef SIS_LINUX_KERNEL #include "vgatypes.h" #include "vstruct.h" #ifdef SIS_CP @@ -72,7 +65,6 @@ #include <linux/fb.h> #include "sis.h" #include <video/sisfb.h> -#endif static const unsigned char SiS_YPbPrTable[3][64] = { { @@ -237,7 +229,7 @@ static const unsigned char SiS_Part2CLVX_6[] = { /* 1080i */ 0xFF,0xFF, }; -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 /* 661 et al LCD data structure (2.03.00) */ static const unsigned char SiS_LCDStruct661[] = { /* 1024x768 */ @@ -279,7 +271,7 @@ static const unsigned char SiS_LCDStruct661[] = { }; #endif -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 static unsigned char SiS300_TrumpionData[14][80] = { { 0x02,0x0A,0x0A,0x01,0x04,0x01,0x00,0x03,0x0D,0x00,0x0D,0x10,0x7F,0x00,0x80,0x02, 0x20,0x03,0x0B,0x00,0x90,0x01,0xC1,0x01,0x60,0x0C,0x30,0x10,0x00,0x00,0x04,0x23, @@ -356,9 +348,6 @@ static unsigned char SiS300_TrumpionData[14][80] = { #endif void SiS_UnLockCRT2(struct SiS_Private *SiS_Pr); -#ifndef SIS_LINUX_KERNEL -void SiS_LockCRT2(struct SiS_Private *SiS_Pr); -#endif void SiS_EnableCRT2(struct SiS_Private *SiS_Pr); unsigned short SiS_GetRatePtr(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex); void SiS_WaitRetrace1(struct SiS_Private *SiS_Pr); @@ -375,9 +364,6 @@ unsigned short SiS_GetVCLK2Ptr(struct SiS_Private *SiS_Pr, unsigned short ModeNo unsigned short RefreshRateTableIndex); unsigned short SiS_GetResInfo(struct SiS_Private *SiS_Pr,unsigned short ModeNo,unsigned short ModeIdIndex); void SiS_DisableBridge(struct SiS_Private *SiS_Pr); -#ifndef SIS_LINUX_KERNEL -void SiS_EnableBridge(struct SiS_Private *SiS_Pr); -#endif bool SiS_SetCRT2Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo); void SiS_SiS30xBLOn(struct SiS_Private *SiS_Pr); void SiS_SiS30xBLOff(struct SiS_Private *SiS_Pr); @@ -386,13 +372,9 @@ void SiS_SetCH700x(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned cha unsigned short SiS_GetCH700x(struct SiS_Private *SiS_Pr, unsigned short tempax); void SiS_SetCH701x(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned char val); unsigned short SiS_GetCH701x(struct SiS_Private *SiS_Pr, unsigned short tempax); -#ifndef SIS_LINUX_KERNEL -void SiS_SetCH70xx(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned char val); -unsigned short SiS_GetCH70xx(struct SiS_Private *SiS_Pr, unsigned short tempax); -#endif void SiS_SetCH70xxANDOR(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned char orval,unsigned short andval); -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 static void SiS_Chrontel701xOn(struct SiS_Private *SiS_Pr); static void SiS_Chrontel701xOff(struct SiS_Private *SiS_Pr); static void SiS_ChrontelInitTVVSync(struct SiS_Private *SiS_Pr); @@ -401,7 +383,7 @@ void SiS_Chrontel701xBLOn(struct SiS_Private *SiS_Pr); void SiS_Chrontel701xBLOff(struct SiS_Private *SiS_Pr); #endif /* 315 */ -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 static bool SiS_SetTrumpionBlock(struct SiS_Private *SiS_Pr, unsigned char *dataptr); void SiS_SetChrontelGPIO(struct SiS_Private *SiS_Pr, unsigned short myvbinfo); #endif @@ -412,21 +394,12 @@ unsigned short SiS_HandleDDC(struct SiS_Private *SiS_Pr, unsigned int VBFlags, i unsigned short adaptnum, unsigned short DDCdatatype, unsigned char *buffer, unsigned int VBFlags2); -#ifdef SIS_XORG_XF86 -unsigned short SiS_InitDDCRegs(struct SiS_Private *SiS_Pr, unsigned int VBFlags, - int VGAEngine, unsigned short adaptnum, unsigned short DDCdatatype, - bool checkcr32, unsigned int VBFlags2); -unsigned short SiS_ProbeDDC(struct SiS_Private *SiS_Pr); -unsigned short SiS_ReadDDC(struct SiS_Private *SiS_Pr, unsigned short DDCdatatype, - unsigned char *buffer); -#else static unsigned short SiS_InitDDCRegs(struct SiS_Private *SiS_Pr, unsigned int VBFlags, int VGAEngine, unsigned short adaptnum, unsigned short DDCdatatype, bool checkcr32, unsigned int VBFlags2); static unsigned short SiS_ProbeDDC(struct SiS_Private *SiS_Pr); static unsigned short SiS_ReadDDC(struct SiS_Private *SiS_Pr, unsigned short DDCdatatype, unsigned char *buffer); -#endif static void SiS_SetSwitchDDC2(struct SiS_Private *SiS_Pr); static unsigned short SiS_SetStart(struct SiS_Private *SiS_Pr); static unsigned short SiS_SetStop(struct SiS_Private *SiS_Pr); @@ -441,13 +414,13 @@ static unsigned short SiS_PrepareDDC(struct SiS_Private *SiS_Pr); static void SiS_SendACK(struct SiS_Private *SiS_Pr, unsigned short yesno); static unsigned short SiS_DoProbeDDC(struct SiS_Private *SiS_Pr); -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 static void SiS_OEM300Setting(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefTabindex); static void SetOEMLCDData2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex,unsigned short RefTableIndex); #endif -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 static void SiS_OEM310Setting(struct SiS_Private *SiS_Pr, unsigned short ModeNo,unsigned short ModeIdIndex, unsigned short RRTI); static void SiS_OEM661Setting(struct SiS_Private *SiS_Pr, @@ -482,15 +455,13 @@ extern void SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short M extern void SiS_CalcCRRegisters(struct SiS_Private *SiS_Pr, int depth); extern unsigned short SiS_GetRefCRTVCLK(struct SiS_Private *SiS_Pr, unsigned short Index, int UseWide); extern unsigned short SiS_GetRefCRT1CRTC(struct SiS_Private *SiS_Pr, unsigned short Index, int UseWide); -#ifdef SIS300 +#ifdef CONFIG_FB_SIS_300 extern void SiS_GetFIFOThresholdIndex300(struct SiS_Private *SiS_Pr, unsigned short *tempbx, unsigned short *tempcl); extern unsigned short SiS_GetFIFOThresholdB300(unsigned short tempbx, unsigned short tempcl); extern unsigned short SiS_GetLatencyFactor630(struct SiS_Private *SiS_Pr, unsigned short index); -#ifdef SIS_LINUX_KERNEL extern unsigned int sisfb_read_nbridge_pci_dword(struct SiS_Private *SiS_Pr, int reg); extern unsigned int sisfb_read_lpc_pci_dword(struct SiS_Private *SiS_Pr, int reg); #endif -#endif #endif diff --git a/drivers/video/sis/initextlfb.c b/drivers/video/sis/initextlfb.c index 99c04a4855d1..9dec64da4015 100644 --- a/drivers/video/sis/initextlfb.c +++ b/drivers/video/sis/initextlfb.c @@ -25,7 +25,6 @@ * Author: Thomas Winischhofer <thomas@winischhofer.net> */ -#include "osdef.h" #include "initdef.h" #include "vgatypes.h" #include "vstruct.h" @@ -59,7 +58,7 @@ sisfb_mode_rate_to_dclock(struct SiS_Private *SiS_Pr, unsigned char modeno, if(rateindex > 0) rateindex--; -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 switch(ModeNo) { case 0x5a: ModeNo = 0x50; break; case 0x5b: ModeNo = 0x56; @@ -103,7 +102,7 @@ sisfb_mode_rate_to_ddata(struct SiS_Private *SiS_Pr, unsigned char modeno, if(rateindex > 0) rateindex--; -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 switch(ModeNo) { case 0x5a: ModeNo = 0x50; break; case 0x5b: ModeNo = 0x56; @@ -187,7 +186,7 @@ sisfb_gettotalfrommode(struct SiS_Private *SiS_Pr, unsigned char modeno, int *ht if(rateindex > 0) rateindex--; -#ifdef SIS315H +#ifdef CONFIG_FB_SIS_315 switch(ModeNo) { case 0x5a: ModeNo = 0x50; break; case 0x5b: ModeNo = 0x56; diff --git a/drivers/video/sis/osdef.h b/drivers/video/sis/osdef.h deleted file mode 100644 index 6ff8f988a1a7..000000000000 --- a/drivers/video/sis/osdef.h +++ /dev/null @@ -1,133 +0,0 @@ -/* $XFree86$ */ -/* $XdotOrg$ */ -/* - * OS depending defines - * - * Copyright (C) 2001-2005 by Thomas Winischhofer, Vienna, Austria - * - * If distributed as part of the Linux kernel, the following license terms - * apply: - * - * * This program is free software; you can redistribute it and/or modify - * * it under the terms of the GNU General Public License as published by - * * the Free Software Foundation; either version 2 of the named License, - * * or any later version. - * * - * * This program is distributed in the hope that it will be useful, - * * but WITHOUT ANY WARRANTY; without even the implied warranty of - * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * * GNU General Public License for more details. - * * - * * You should have received a copy of the GNU General Public License - * * along with this program; if not, write to the Free Software - * * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA - * - * Otherwise, the following license terms apply: - * - * * Redistribution and use in source and binary forms, with or without - * * modification, are permitted provided that the following conditions - * * are met: - * * 1) Redistributions of source code must retain the above copyright - * * notice, this list of conditions and the following disclaimer. - * * 2) Redistributions in binary form must reproduce the above copyright - * * notice, this list of conditions and the following disclaimer in the - * * documentation and/or other materials provided with the distribution. - * * 3) The name of the author may not be used to endorse or promote products - * * derived from this software without specific prior written permission. - * * - * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * Author: Thomas Winischhofer <thomas@winischhofer.net> - * Silicon Integrated Systems, Inc. (used by permission) - * - */ - -#ifndef _SIS_OSDEF_H_ -#define _SIS_OSDEF_H_ - -/* The choices are: */ -#define SIS_LINUX_KERNEL /* Linux kernel framebuffer */ -#undef SIS_XORG_XF86 /* XFree86/X.org */ - -#ifdef OutPortByte -#undef OutPortByte -#endif - -#ifdef OutPortWord -#undef OutPortWord -#endif - -#ifdef OutPortLong -#undef OutPortLong -#endif - -#ifdef InPortByte -#undef InPortByte -#endif - -#ifdef InPortWord -#undef InPortWord -#endif - -#ifdef InPortLong -#undef InPortLong -#endif - -/**********************************************************************/ -/* LINUX KERNEL */ -/**********************************************************************/ - -#ifdef SIS_LINUX_KERNEL - -#ifdef CONFIG_FB_SIS_300 -#define SIS300 -#endif - -#ifdef CONFIG_FB_SIS_315 -#define SIS315H -#endif - -#if !defined(SIS300) && !defined(SIS315H) -#warning Neither CONFIG_FB_SIS_300 nor CONFIG_FB_SIS_315 is set -#warning sisfb will not work! -#endif - -#define OutPortByte(p,v) outb((u8)(v),(SISIOADDRESS)(p)) -#define OutPortWord(p,v) outw((u16)(v),(SISIOADDRESS)(p)) -#define OutPortLong(p,v) outl((u32)(v),(SISIOADDRESS)(p)) -#define InPortByte(p) inb((SISIOADDRESS)(p)) -#define InPortWord(p) inw((SISIOADDRESS)(p)) -#define InPortLong(p) inl((SISIOADDRESS)(p)) -#define SiS_SetMemory(MemoryAddress,MemorySize,value) memset_io(MemoryAddress, value, MemorySize) - -#endif /* LINUX_KERNEL */ - -/**********************************************************************/ -/* XFree86/X.org */ -/**********************************************************************/ - -#ifdef SIS_XORG_XF86 - -#define SIS300 -#define SIS315H - -#define OutPortByte(p,v) outSISREG((IOADDRESS)(p),(CARD8)(v)) -#define OutPortWord(p,v) outSISREGW((IOADDRESS)(p),(CARD16)(v)) -#define OutPortLong(p,v) outSISREGL((IOADDRESS)(p),(CARD32)(v)) -#define InPortByte(p) inSISREG((IOADDRESS)(p)) -#define InPortWord(p) inSISREGW((IOADDRESS)(p)) -#define InPortLong(p) inSISREGL((IOADDRESS)(p)) -#define SiS_SetMemory(MemoryAddress,MemorySize,value) memset(MemoryAddress, value, MemorySize) - -#endif /* XF86 */ - -#endif /* _OSDEF_H_ */ diff --git a/drivers/video/sis/sis.h b/drivers/video/sis/sis.h index 7c5710e3fb56..80d89d37c414 100644 --- a/drivers/video/sis/sis.h +++ b/drivers/video/sis/sis.h @@ -24,7 +24,6 @@ #ifndef _SIS_H_ #define _SIS_H_ -#include "osdef.h" #include <video/sisfb.h> #include "vgatypes.h" diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c index 3dde12b0ab06..7e3370f115b6 100644 --- a/drivers/video/sis/sis_main.c +++ b/drivers/video/sis/sis_main.c @@ -60,6 +60,11 @@ #include "sis.h" #include "sis_main.h" +#if !defined(CONFIG_FB_SIS_300) && !defined(CONFIG_FB_SIS_315) +#warning Neither CONFIG_FB_SIS_300 nor CONFIG_FB_SIS_315 is set +#warning sisfb will not work! +#endif + static void sisfb_handle_command(struct sis_video_info *ivideo, struct sisfb_cmd *sisfb_command); @@ -4114,14 +4119,6 @@ sisfb_find_rom(struct pci_dev *pdev) if(sisfb_check_rom(rom_base, ivideo)) { if((myrombase = vmalloc(65536))) { - - /* Work around bug in pci/rom.c: Folks forgot to check - * whether the size retrieved from the BIOS image eventually - * is larger than the mapped size - */ - if(pci_resource_len(pdev, PCI_ROM_RESOURCE) < romsize) - romsize = pci_resource_len(pdev, PCI_ROM_RESOURCE); - memcpy_fromio(myrombase, rom_base, (romsize > 65536) ? 65536 : romsize); } @@ -4155,23 +4152,6 @@ sisfb_find_rom(struct pci_dev *pdev) } -#else - - pci_read_config_dword(pdev, PCI_ROM_ADDRESS, &temp); - pci_write_config_dword(pdev, PCI_ROM_ADDRESS, - (ivideo->video_base & PCI_ROM_ADDRESS_MASK) | PCI_ROM_ADDRESS_ENABLE); - - rom_base = ioremap(ivideo->video_base, 65536); - if(rom_base) { - if(sisfb_check_rom(rom_base, ivideo)) { - if((myrombase = vmalloc(65536))) - memcpy_fromio(myrombase, rom_base, 65536); - } - iounmap(rom_base); - } - - pci_write_config_dword(pdev, PCI_ROM_ADDRESS, temp); - #endif return myrombase; diff --git a/drivers/video/sis/vgatypes.h b/drivers/video/sis/vgatypes.h index 81a22eaabfde..12c0dfaf2518 100644 --- a/drivers/video/sis/vgatypes.h +++ b/drivers/video/sis/vgatypes.h @@ -55,21 +55,10 @@ #define SISIOMEMTYPE -#ifdef SIS_LINUX_KERNEL typedef unsigned long SISIOADDRESS; #include <linux/types.h> /* Need __iomem */ #undef SISIOMEMTYPE #define SISIOMEMTYPE __iomem -#endif - -#ifdef SIS_XORG_XF86 -#if XF86_VERSION_CURRENT < XF86_VERSION_NUMERIC(4,2,0,0,0) -typedef unsigned long IOADDRESS; -typedef unsigned long SISIOADDRESS; -#else -typedef IOADDRESS SISIOADDRESS; -#endif -#endif typedef enum _SIS_CHIP_TYPE { SIS_VGALegacy = 0, diff --git a/drivers/video/sis/vstruct.h b/drivers/video/sis/vstruct.h index bef4aae388d0..ea94d214dcff 100644 --- a/drivers/video/sis/vstruct.h +++ b/drivers/video/sis/vstruct.h @@ -233,24 +233,15 @@ struct SiS_Private { unsigned char ChipType; unsigned char ChipRevision; -#ifdef SIS_XORG_XF86 - PCITAG PciTag; -#endif -#ifdef SIS_LINUX_KERNEL void *ivideo; -#endif unsigned char *VirtualRomBase; bool UseROM; -#ifdef SIS_LINUX_KERNEL unsigned char SISIOMEMTYPE *VideoMemoryAddress; unsigned int VideoMemorySize; -#endif SISIOADDRESS IOAddress; SISIOADDRESS IOAddress2; /* For dual chip XGI volari */ -#ifdef SIS_LINUX_KERNEL SISIOADDRESS RelIO; -#endif SISIOADDRESS SiS_P3c4; SISIOADDRESS SiS_P3d4; SISIOADDRESS SiS_P3c0; @@ -280,9 +271,6 @@ struct SiS_Private unsigned short SiS_IF_DEF_FSTN; unsigned short SiS_SysFlags; unsigned char SiS_VGAINFO; -#ifdef SIS_XORG_XF86 - unsigned short SiS_CP1, SiS_CP2, SiS_CP3, SiS_CP4; -#endif bool SiS_UseROM; bool SiS_ROMNew; bool SiS_XGIROM; diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c index 3a43ebf83a49..efb35aa8309a 100644 --- a/drivers/virtio/virtio.c +++ b/drivers/virtio/virtio.c @@ -9,19 +9,19 @@ static ssize_t device_show(struct device *_d, struct device_attribute *attr, char *buf) { struct virtio_device *dev = container_of(_d,struct virtio_device,dev); - return sprintf(buf, "%hu", dev->id.device); + return sprintf(buf, "0x%04x\n", dev->id.device); } static ssize_t vendor_show(struct device *_d, struct device_attribute *attr, char *buf) { struct virtio_device *dev = container_of(_d,struct virtio_device,dev); - return sprintf(buf, "%hu", dev->id.vendor); + return sprintf(buf, "0x%04x\n", dev->id.vendor); } static ssize_t status_show(struct device *_d, struct device_attribute *attr, char *buf) { struct virtio_device *dev = container_of(_d,struct virtio_device,dev); - return sprintf(buf, "0x%08x", dev->config->get_status(dev)); + return sprintf(buf, "0x%08x\n", dev->config->get_status(dev)); } static ssize_t modalias_show(struct device *_d, struct device_attribute *attr, char *buf) diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c index 1475ed6b575f..cc2f73e03475 100644 --- a/drivers/virtio/virtio_ring.c +++ b/drivers/virtio/virtio_ring.c @@ -230,9 +230,6 @@ add_head: pr_debug("Added buffer head %i to %p\n", head, vq); END_USE(vq); - /* If we're indirect, we can fit many (assuming not OOM). */ - if (vq->indirect) - return vq->num_free ? vq->vring.num : 0; return vq->num_free; } EXPORT_SYMBOL_GPL(virtqueue_add_buf_gfp); diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile index eb8a78d77d9d..533a199e7a3f 100644 --- a/drivers/xen/Makefile +++ b/drivers/xen/Makefile @@ -8,9 +8,12 @@ obj-$(CONFIG_BLOCK) += biomerge.o obj-$(CONFIG_HOTPLUG_CPU) += cpu_hotplug.o obj-$(CONFIG_XEN_XENCOMM) += xencomm.o obj-$(CONFIG_XEN_BALLOON) += balloon.o -obj-$(CONFIG_XEN_DEV_EVTCHN) += evtchn.o +obj-$(CONFIG_XEN_DEV_EVTCHN) += xen-evtchn.o obj-$(CONFIG_XENFS) += xenfs/ obj-$(CONFIG_XEN_SYS_HYPERVISOR) += sys-hypervisor.o obj-$(CONFIG_XEN_PLATFORM_PCI) += platform-pci.o obj-$(CONFIG_SWIOTLB_XEN) += swiotlb-xen.o obj-$(CONFIG_XEN_DOM0) += pci.o + +xen-evtchn-y := evtchn.o + diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index 500290b150bb..2b17ad5b4b32 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -50,6 +50,7 @@ #include <asm/pgtable.h> #include <asm/uaccess.h> #include <asm/tlb.h> +#include <asm/e820.h> #include <asm/xen/hypervisor.h> #include <asm/xen/hypercall.h> @@ -119,7 +120,7 @@ static void scrub_page(struct page *page) } /* balloon_append: add the given page to the balloon. */ -static void balloon_append(struct page *page) +static void __balloon_append(struct page *page) { /* Lowmem is re-populated first, so highmem pages go at list tail. */ if (PageHighMem(page)) { @@ -130,7 +131,11 @@ static void balloon_append(struct page *page) list_add(&page->lru, &ballooned_pages); balloon_stats.balloon_low++; } +} +static void balloon_append(struct page *page) +{ + __balloon_append(page); totalram_pages--; } @@ -191,7 +196,7 @@ static unsigned long current_target(void) static int increase_reservation(unsigned long nr_pages) { - unsigned long pfn, i, flags; + unsigned long pfn, i; struct page *page; long rc; struct xen_memory_reservation reservation = { @@ -203,8 +208,6 @@ static int increase_reservation(unsigned long nr_pages) if (nr_pages > ARRAY_SIZE(frame_list)) nr_pages = ARRAY_SIZE(frame_list); - spin_lock_irqsave(&xen_reservation_lock, flags); - page = balloon_first_page(); for (i = 0; i < nr_pages; i++) { BUG_ON(page == NULL); @@ -247,14 +250,12 @@ static int increase_reservation(unsigned long nr_pages) balloon_stats.current_pages += rc; out: - spin_unlock_irqrestore(&xen_reservation_lock, flags); - return rc < 0 ? rc : rc != nr_pages; } static int decrease_reservation(unsigned long nr_pages) { - unsigned long pfn, i, flags; + unsigned long pfn, i; struct page *page; int need_sleep = 0; int ret; @@ -292,8 +293,6 @@ static int decrease_reservation(unsigned long nr_pages) kmap_flush_unused(); flush_tlb_all(); - spin_lock_irqsave(&xen_reservation_lock, flags); - /* No more mappings: invalidate P2M and add to balloon. */ for (i = 0; i < nr_pages; i++) { pfn = mfn_to_pfn(frame_list[i]); @@ -308,8 +307,6 @@ static int decrease_reservation(unsigned long nr_pages) balloon_stats.current_pages -= nr_pages; - spin_unlock_irqrestore(&xen_reservation_lock, flags); - return need_sleep; } @@ -395,7 +392,7 @@ static struct notifier_block xenstore_notifier; static int __init balloon_init(void) { - unsigned long pfn; + unsigned long pfn, extra_pfn_end; struct page *page; if (!xen_pv_domain()) @@ -416,10 +413,15 @@ static int __init balloon_init(void) register_balloon(&balloon_sysdev); /* Initialise the balloon with excess memory space. */ - for (pfn = xen_start_info->nr_pages; pfn < max_pfn; pfn++) { + extra_pfn_end = min(e820_end_of_ram_pfn(), + (unsigned long)PFN_DOWN(xen_extra_mem_start + xen_extra_mem_size)); + for (pfn = PFN_UP(xen_extra_mem_start); + pfn < extra_pfn_end; + pfn++) { page = pfn_to_page(pfn); - if (!PageReserved(page)) - balloon_append(page); + /* totalram_pages doesn't include the boot-time + balloon extension, so don't subtract from it. */ + __balloon_append(page); } target_watch.callback = watch_target; diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 321a0c8346e5..2811bb988ea0 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -278,17 +278,17 @@ static void bind_evtchn_to_cpu(unsigned int chn, unsigned int cpu) cpumask_copy(irq_to_desc(irq)->affinity, cpumask_of(cpu)); #endif - __clear_bit(chn, cpu_evtchn_mask(cpu_from_irq(irq))); - __set_bit(chn, cpu_evtchn_mask(cpu)); + clear_bit(chn, cpu_evtchn_mask(cpu_from_irq(irq))); + set_bit(chn, cpu_evtchn_mask(cpu)); irq_info[irq].cpu = cpu; } static void init_evtchn_cpu_bindings(void) { + int i; #ifdef CONFIG_SMP struct irq_desc *desc; - int i; /* By default all event channels notify CPU#0. */ for_each_irq_desc(i, desc) { @@ -296,7 +296,10 @@ static void init_evtchn_cpu_bindings(void) } #endif - memset(cpu_evtchn_mask(0), ~0, sizeof(struct cpu_evtchn_s)); + for_each_possible_cpu(i) + memset(cpu_evtchn_mask(i), + (i == 0) ? ~0 : 0, sizeof(struct cpu_evtchn_s)); + } static inline void clear_evtchn(int port) @@ -752,7 +755,7 @@ int xen_destroy_irq(int irq) goto out; if (xen_initial_domain()) { - unmap_irq.pirq = info->u.pirq.gsi; + unmap_irq.pirq = info->u.pirq.pirq; unmap_irq.domid = DOMID_SELF; rc = HYPERVISOR_physdev_op(PHYSDEVOP_unmap_pirq, &unmap_irq); if (rc) { diff --git a/drivers/xen/evtchn.c b/drivers/xen/evtchn.c index fec6ba3c08a8..ef11daf0cafe 100644 --- a/drivers/xen/evtchn.c +++ b/drivers/xen/evtchn.c @@ -69,20 +69,51 @@ struct per_user_data { const char *name; }; -/* Who's bound to each port? */ -static struct per_user_data *port_user[NR_EVENT_CHANNELS]; +/* + * Who's bound to each port? This is logically an array of struct + * per_user_data *, but we encode the current enabled-state in bit 0. + */ +static unsigned long *port_user; static DEFINE_SPINLOCK(port_user_lock); /* protects port_user[] and ring_prod */ -irqreturn_t evtchn_interrupt(int irq, void *data) +static inline struct per_user_data *get_port_user(unsigned port) +{ + return (struct per_user_data *)(port_user[port] & ~1); +} + +static inline void set_port_user(unsigned port, struct per_user_data *u) +{ + port_user[port] = (unsigned long)u; +} + +static inline bool get_port_enabled(unsigned port) +{ + return port_user[port] & 1; +} + +static inline void set_port_enabled(unsigned port, bool enabled) +{ + if (enabled) + port_user[port] |= 1; + else + port_user[port] &= ~1; +} + +static irqreturn_t evtchn_interrupt(int irq, void *data) { unsigned int port = (unsigned long)data; struct per_user_data *u; spin_lock(&port_user_lock); - u = port_user[port]; + u = get_port_user(port); + + WARN(!get_port_enabled(port), + "Interrupt for port %d, but apparently not enabled; per-user %p\n", + port, u); disable_irq_nosync(irq); + set_port_enabled(port, false); if ((u->ring_prod - u->ring_cons) < EVTCHN_RING_SIZE) { u->ring[EVTCHN_RING_MASK(u->ring_prod)] = port; @@ -92,9 +123,8 @@ irqreturn_t evtchn_interrupt(int irq, void *data) kill_fasync(&u->evtchn_async_queue, SIGIO, POLL_IN); } - } else { + } else u->ring_overflow = 1; - } spin_unlock(&port_user_lock); @@ -198,9 +228,18 @@ static ssize_t evtchn_write(struct file *file, const char __user *buf, goto out; spin_lock_irq(&port_user_lock); - for (i = 0; i < (count/sizeof(evtchn_port_t)); i++) - if ((kbuf[i] < NR_EVENT_CHANNELS) && (port_user[kbuf[i]] == u)) - enable_irq(irq_from_evtchn(kbuf[i])); + + for (i = 0; i < (count/sizeof(evtchn_port_t)); i++) { + unsigned port = kbuf[i]; + + if (port < NR_EVENT_CHANNELS && + get_port_user(port) == u && + !get_port_enabled(port)) { + set_port_enabled(port, true); + enable_irq(irq_from_evtchn(port)); + } + } + spin_unlock_irq(&port_user_lock); rc = count; @@ -222,8 +261,9 @@ static int evtchn_bind_to_user(struct per_user_data *u, int port) * interrupt handler yet, and our caller has already * serialized bind operations.) */ - BUG_ON(port_user[port] != NULL); - port_user[port] = u; + BUG_ON(get_port_user(port) != NULL); + set_port_user(port, u); + set_port_enabled(port, true); /* start enabled */ rc = bind_evtchn_to_irqhandler(port, evtchn_interrupt, IRQF_DISABLED, u->name, (void *)(unsigned long)port); @@ -239,10 +279,7 @@ static void evtchn_unbind_from_user(struct per_user_data *u, int port) unbind_from_irqhandler(irq, (void *)(unsigned long)port); - /* make sure we unbind the irq handler before clearing the port */ - barrier(); - - port_user[port] = NULL; + set_port_user(port, NULL); } static long evtchn_ioctl(struct file *file, @@ -333,15 +370,17 @@ static long evtchn_ioctl(struct file *file, spin_lock_irq(&port_user_lock); rc = -ENOTCONN; - if (port_user[unbind.port] != u) { + if (get_port_user(unbind.port) != u) { spin_unlock_irq(&port_user_lock); break; } - evtchn_unbind_from_user(u, unbind.port); + disable_irq(irq_from_evtchn(unbind.port)); spin_unlock_irq(&port_user_lock); + evtchn_unbind_from_user(u, unbind.port); + rc = 0; break; } @@ -355,7 +394,7 @@ static long evtchn_ioctl(struct file *file, if (notify.port >= NR_EVENT_CHANNELS) { rc = -EINVAL; - } else if (port_user[notify.port] != u) { + } else if (get_port_user(notify.port) != u) { rc = -ENOTCONN; } else { notify_remote_via_evtchn(notify.port); @@ -431,7 +470,7 @@ static int evtchn_open(struct inode *inode, struct file *filp) filp->private_data = u; - return 0; + return nonseekable_open(inode, filp);; } static int evtchn_release(struct inode *inode, struct file *filp) @@ -444,14 +483,21 @@ static int evtchn_release(struct inode *inode, struct file *filp) free_page((unsigned long)u->ring); for (i = 0; i < NR_EVENT_CHANNELS; i++) { - if (port_user[i] != u) + if (get_port_user(i) != u) continue; - evtchn_unbind_from_user(port_user[i], i); + disable_irq(irq_from_evtchn(i)); } spin_unlock_irq(&port_user_lock); + for (i = 0; i < NR_EVENT_CHANNELS; i++) { + if (get_port_user(i) != u) + continue; + + evtchn_unbind_from_user(get_port_user(i), i); + } + kfree(u->name); kfree(u); @@ -467,12 +513,12 @@ static const struct file_operations evtchn_fops = { .fasync = evtchn_fasync, .open = evtchn_open, .release = evtchn_release, - .llseek = noop_llseek, + .llseek = no_llseek, }; static struct miscdevice evtchn_miscdev = { .minor = MISC_DYNAMIC_MINOR, - .name = "evtchn", + .name = "xen/evtchn", .fops = &evtchn_fops, }; static int __init evtchn_init(void) @@ -482,8 +528,11 @@ static int __init evtchn_init(void) if (!xen_domain()) return -ENODEV; + port_user = kcalloc(NR_EVENT_CHANNELS, sizeof(*port_user), GFP_KERNEL); + if (port_user == NULL) + return -ENOMEM; + spin_lock_init(&port_user_lock); - memset(port_user, 0, sizeof(port_user)); /* Create '/dev/misc/evtchn'. */ err = misc_register(&evtchn_miscdev); @@ -499,6 +548,9 @@ static int __init evtchn_init(void) static void __exit evtchn_cleanup(void) { + kfree(port_user); + port_user = NULL; + misc_deregister(&evtchn_miscdev); } diff --git a/drivers/xen/xenfs/privcmd.c b/drivers/xen/xenfs/privcmd.c index 0f5d4162b22d..dbd3b16fd131 100644 --- a/drivers/xen/xenfs/privcmd.c +++ b/drivers/xen/xenfs/privcmd.c @@ -265,9 +265,7 @@ static int mmap_return_errors(void *data, void *state) xen_pfn_t *mfnp = data; struct mmap_batch_state *st = state; - put_user(*mfnp, st->user++); - - return 0; + return put_user(*mfnp, st->user++); } static struct vm_operations_struct privcmd_vm_ops; @@ -322,10 +320,8 @@ static long privcmd_ioctl_mmap_batch(void __user *udata) up_write(&mm->mmap_sem); if (state.err > 0) { - ret = 0; - state.user = m.arr; - traverse_pages(m.num, sizeof(xen_pfn_t), + ret = traverse_pages(m.num, sizeof(xen_pfn_t), &pagelist, mmap_return_errors, &state); } @@ -383,8 +379,9 @@ static int privcmd_mmap(struct file *file, struct vm_area_struct *vma) if (xen_feature(XENFEAT_auto_translated_physmap)) return -ENOSYS; - /* DONTCOPY is essential for Xen as copy_page_range is broken. */ - vma->vm_flags |= VM_RESERVED | VM_IO | VM_DONTCOPY; + /* DONTCOPY is essential for Xen because copy_page_range doesn't know + * how to recreate these mappings */ + vma->vm_flags |= VM_RESERVED | VM_IO | VM_DONTCOPY | VM_PFNMAP; vma->vm_ops = &privcmd_vm_ops; vma->vm_private_data = NULL; diff --git a/drivers/xen/xenfs/super.c b/drivers/xen/xenfs/super.c index f6339d11d59c..1aa389719846 100644 --- a/drivers/xen/xenfs/super.c +++ b/drivers/xen/xenfs/super.c @@ -12,8 +12,6 @@ #include <linux/module.h> #include <linux/fs.h> #include <linux/magic.h> -#include <linux/mm.h> -#include <linux/backing-dev.h> #include <xen/xen.h> @@ -24,28 +22,12 @@ MODULE_DESCRIPTION("Xen filesystem"); MODULE_LICENSE("GPL"); -static int xenfs_set_page_dirty(struct page *page) -{ - return !TestSetPageDirty(page); -} - -static const struct address_space_operations xenfs_aops = { - .set_page_dirty = xenfs_set_page_dirty, -}; - -static struct backing_dev_info xenfs_backing_dev_info = { - .ra_pages = 0, /* No readahead */ - .capabilities = BDI_CAP_NO_ACCT_AND_WRITEBACK, -}; - static struct inode *xenfs_make_inode(struct super_block *sb, int mode) { struct inode *ret = new_inode(sb); if (ret) { ret->i_mode = mode; - ret->i_mapping->a_ops = &xenfs_aops; - ret->i_mapping->backing_dev_info = &xenfs_backing_dev_info; ret->i_uid = ret->i_gid = 0; ret->i_blocks = 0; ret->i_atime = ret->i_mtime = ret->i_ctime = CURRENT_TIME; @@ -121,9 +103,9 @@ static int xenfs_fill_super(struct super_block *sb, void *data, int silent) return rc; } -static int xenfs_mount(struct file_system_type *fs_type, - int flags, const char *dev_name, - void *data) +static struct dentry *xenfs_mount(struct file_system_type *fs_type, + int flags, const char *dev_name, + void *data) { return mount_single(fs_type, flags, data, xenfs_fill_super); } @@ -137,25 +119,11 @@ static struct file_system_type xenfs_type = { static int __init xenfs_init(void) { - int err; - if (!xen_domain()) { - printk(KERN_INFO "xenfs: not registering filesystem on non-xen platform\n"); - return 0; - } - - err = register_filesystem(&xenfs_type); - if (err) { - printk(KERN_ERR "xenfs: Unable to register filesystem!\n"); - goto out; - } - - err = bdi_init(&xenfs_backing_dev_info); - if (err) - unregister_filesystem(&xenfs_type); - - out: + if (xen_domain()) + return register_filesystem(&xenfs_type); - return err; + printk(KERN_INFO "XENFS: not registering filesystem on non-xen platform\n"); + return 0; } static void __exit xenfs_exit(void) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index c8224587123f..9242d294fe90 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -134,6 +134,7 @@ EXPORT_SYMBOL_GPL(fuse_do_open); void fuse_finish_open(struct inode *inode, struct file *file) { struct fuse_file *ff = file->private_data; + struct fuse_conn *fc = get_fuse_conn(inode); if (ff->open_flags & FOPEN_DIRECT_IO) file->f_op = &fuse_direct_io_file_operations; @@ -141,6 +142,15 @@ void fuse_finish_open(struct inode *inode, struct file *file) invalidate_inode_pages2(inode->i_mapping); if (ff->open_flags & FOPEN_NONSEEKABLE) nonseekable_open(inode, file); + if (fc->atomic_o_trunc && (file->f_flags & O_TRUNC)) { + struct fuse_inode *fi = get_fuse_inode(inode); + + spin_lock(&fc->lock); + fi->attr_version = ++fc->attr_version; + i_size_write(inode, 0); + spin_unlock(&fc->lock); + fuse_invalidate_attr(inode); + } } int fuse_open_common(struct inode *inode, struct file *file, bool isdir) diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index da6b01d70f01..c126c83b9a45 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -706,6 +706,7 @@ static int pagemap_hugetlb_range(pte_t *pte, unsigned long hmask, * skip over unmapped regions. */ #define PAGEMAP_WALK_SIZE (PMD_SIZE) +#define PAGEMAP_WALK_MASK (PMD_MASK) static ssize_t pagemap_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { @@ -776,7 +777,7 @@ static ssize_t pagemap_read(struct file *file, char __user *buf, unsigned long end; pm.pos = 0; - end = start_vaddr + PAGEMAP_WALK_SIZE; + end = (start_vaddr + PAGEMAP_WALK_SIZE) & PAGEMAP_WALK_MASK; /* overflow ? */ if (end < start_vaddr || end > end_vaddr) end = end_vaddr; diff --git a/fs/reiserfs/ioctl.c b/fs/reiserfs/ioctl.c index bd9763e76bae..79265fdc317a 100644 --- a/fs/reiserfs/ioctl.c +++ b/fs/reiserfs/ioctl.c @@ -183,12 +183,11 @@ int reiserfs_unpack(struct inode *inode, struct file *filp) return 0; } - /* we need to make sure nobody is changing the file size beneath - ** us - */ - reiserfs_mutex_lock_safe(&inode->i_mutex, inode->i_sb); depth = reiserfs_write_lock_once(inode->i_sb); + /* we need to make sure nobody is changing the file size beneath us */ + reiserfs_mutex_lock_safe(&inode->i_mutex, inode->i_sb); + write_from = inode->i_size & (blocksize - 1); /* if we are on a block boundary, we are already unpacked. */ if (write_from == 0) { diff --git a/include/linux/fb.h b/include/linux/fb.h index 7fca3dc4e475..d1631d37e9e0 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -1122,6 +1122,7 @@ extern const struct fb_videomode *fb_find_best_display(const struct fb_monspecs /* drivers/video/fbcmap.c */ extern int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp); +extern int fb_alloc_cmap_gfp(struct fb_cmap *cmap, int len, int transp, gfp_t flags); extern void fb_dealloc_cmap(struct fb_cmap *cmap); extern int fb_copy_cmap(const struct fb_cmap *from, struct fb_cmap *to); extern int fb_cmap_to_user(const struct fb_cmap *from, struct fb_cmap_user *to); diff --git a/include/linux/fs.h b/include/linux/fs.h index eedc00b7b1ee..c9e06cc70dad 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -34,9 +34,9 @@ #define SEEK_MAX SEEK_END struct fstrim_range { - uint64_t start; - uint64_t len; - uint64_t minlen; + __u64 start; + __u64 len; + __u64 minlen; }; /* And dynamically-tunable limits and defaults: */ diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h index 1ff81b51b656..dd3c34ebca9a 100644 --- a/include/linux/marvell_phy.h +++ b/include/linux/marvell_phy.h @@ -11,6 +11,7 @@ #define MARVELL_PHY_ID_88E1118 0x01410e10 #define MARVELL_PHY_ID_88E1121R 0x01410cb0 #define MARVELL_PHY_ID_88E1145 0x01410cd0 +#define MARVELL_PHY_ID_88E1149R 0x01410e50 #define MARVELL_PHY_ID_88E1240 0x01410e30 #define MARVELL_PHY_ID_88E1318S 0x01410e90 diff --git a/include/linux/mfd/wm8350/audio.h b/include/linux/mfd/wm8350/audio.h index a95141eafce3..bd581c6fa085 100644 --- a/include/linux/mfd/wm8350/audio.h +++ b/include/linux/mfd/wm8350/audio.h @@ -522,9 +522,6 @@ #define WM8350_MCLK_SEL_PLL_32K 3 #define WM8350_MCLK_SEL_MCLK 5 -#define WM8350_MCLK_DIR_OUT 0 -#define WM8350_MCLK_DIR_IN 1 - /* clock divider id's */ #define WM8350_ADC_CLKDIV 0 #define WM8350_DAC_CLKDIV 1 diff --git a/include/linux/module.h b/include/linux/module.h index b29e7458b966..7575bbbdf2a2 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -517,7 +517,7 @@ static inline void __module_get(struct module *module) #define symbol_put_addr(p) do { } while(0) #endif /* CONFIG_MODULE_UNLOAD */ -int use_module(struct module *a, struct module *b); +int ref_module(struct module *a, struct module *b); /* This is a #define so the string doesn't get put in every .o file */ #define module_name(mod) \ diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h index 5bb13b3db84d..b02195dfc1b0 100644 --- a/include/linux/page_cgroup.h +++ b/include/linux/page_cgroup.h @@ -59,8 +59,6 @@ static inline void ClearPageCgroup##uname(struct page_cgroup *pc) \ static inline int TestClearPageCgroup##uname(struct page_cgroup *pc) \ { return test_and_clear_bit(PCG_##lname, &pc->flags); } -TESTPCGFLAG(Locked, LOCK) - /* Cache flag is set only once (at allocation) */ TESTPCGFLAG(Cache, CACHE) CLEARPCGFLAG(Cache, CACHE) @@ -104,6 +102,11 @@ static inline void unlock_page_cgroup(struct page_cgroup *pc) bit_spin_unlock(PCG_LOCK, &pc->flags); } +static inline int page_is_cgroup_locked(struct page_cgroup *pc) +{ + return bit_spin_is_locked(PCG_LOCK, &pc->flags); +} + #else /* CONFIG_CGROUP_MEM_RES_CTLR */ struct page_cgroup; diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h index cea0c38e7a63..9a52f72527dc 100644 --- a/include/linux/sh_clk.h +++ b/include/linux/sh_clk.h @@ -19,11 +19,13 @@ struct clk_mapping { }; struct clk_ops { +#ifdef CONFIG_SH_CLK_CPG_LEGACY void (*init)(struct clk *clk); +#endif int (*enable)(struct clk *clk); void (*disable)(struct clk *clk); unsigned long (*recalc)(struct clk *clk); - int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id); + int (*set_rate)(struct clk *clk, unsigned long rate); int (*set_parent)(struct clk *clk, struct clk *parent); long (*round_rate)(struct clk *clk, unsigned long rate); }; @@ -67,36 +69,6 @@ int clk_register(struct clk *); void clk_unregister(struct clk *); void clk_enable_init_clocks(void); -/** - * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter - * @clk: clock source - * @rate: desired clock rate in Hz - * @algo_id: algorithm id to be passed down to ops->set_rate - * - * Returns success (0) or negative errno. - */ -int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id); - -enum clk_sh_algo_id { - NO_CHANGE = 0, - - IUS_N1_N1, - IUS_322, - IUS_522, - IUS_N11, - - SB_N1, - - SB3_N1, - SB3_32, - SB3_43, - SB3_54, - - BP_N1, - - IP_N1, -}; - struct clk_div_mult_table { unsigned int *divisors; unsigned int nr_divisors; diff --git a/include/video/da8xx-fb.h b/include/video/da8xx-fb.h index 6316cdabf73f..89d43b3d4cb9 100644 --- a/include/video/da8xx-fb.h +++ b/include/video/da8xx-fb.h @@ -99,7 +99,6 @@ struct lcd_sync_arg { #define FBIPUT_COLOR _IOW('F', 6, int) #define FBIPUT_HSYNC _IOW('F', 9, int) #define FBIPUT_VSYNC _IOW('F', 10, int) -#define FBIO_WAITFORVSYNC _IOW('F', 0x20, u_int32_t) #endif /* ifndef DA8XX_FB_H */ diff --git a/include/xen/interface/memory.h b/include/xen/interface/memory.h index d7a6c13bde69..eac3ce153719 100644 --- a/include/xen/interface/memory.h +++ b/include/xen/interface/memory.h @@ -141,6 +141,19 @@ struct xen_machphys_mfn_list { DEFINE_GUEST_HANDLE_STRUCT(xen_machphys_mfn_list); /* + * Returns the location in virtual address space of the machine_to_phys + * mapping table. Architectures which do not have a m2p table, or which do not + * map it by default into guest address space, do not implement this command. + * arg == addr of xen_machphys_mapping_t. + */ +#define XENMEM_machphys_mapping 12 +struct xen_machphys_mapping { + unsigned long v_start, v_end; /* Start and end virtual addresses. */ + unsigned long max_mfn; /* Maximum MFN that can be looked up. */ +}; +DEFINE_GUEST_HANDLE_STRUCT(xen_machphys_mapping_t); + +/* * Sets the GPFN at which a particular page appears in the specified guest's * pseudophysical address space. * arg == addr of xen_add_to_physmap_t. diff --git a/include/xen/page.h b/include/xen/page.h index eaf85fab1263..0be36b976f4b 100644 --- a/include/xen/page.h +++ b/include/xen/page.h @@ -1 +1,8 @@ +#ifndef _XEN_PAGE_H +#define _XEN_PAGE_H + #include <asm/xen/page.h> + +extern phys_addr_t xen_extra_mem_start, xen_extra_mem_size; + +#endif /* _XEN_PAGE_H */ diff --git a/include/xen/privcmd.h b/include/xen/privcmd.h index b42cdfd92fee..17857fb4d550 100644 --- a/include/xen/privcmd.h +++ b/include/xen/privcmd.h @@ -34,13 +34,10 @@ #define __LINUX_PUBLIC_PRIVCMD_H__ #include <linux/types.h> +#include <linux/compiler.h> typedef unsigned long xen_pfn_t; -#ifndef __user -#define __user -#endif - struct privcmd_hypercall { __u64 op; __u64 arg[5]; diff --git a/init/Kconfig b/init/Kconfig index 88c10468db46..c9728992a776 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -613,6 +613,19 @@ config CGROUP_MEM_RES_CTLR_SWAP if boot option "noswapaccount" is set, swap will not be accounted. Now, memory usage of swap_cgroup is 2 bytes per entry. If swap page size is 4096bytes, 512k per 1Gbytes of swap. +config CGROUP_MEM_RES_CTLR_SWAP_ENABLED + bool "Memory Resource Controller Swap Extension enabled by default" + depends on CGROUP_MEM_RES_CTLR_SWAP + default y + help + Memory Resource Controller Swap Extension comes with its price in + a bigger memory consumption. General purpose distribution kernels + which want to enable the feautre but keep it disabled by default + and let the user enable it by swapaccount boot command line + parameter should have this option unselected. + For those who want to have the feature enabled by default should + select this option (if, for some reason, they need to disable it + then noswapaccount does the trick). menuconfig CGROUP_SCHED bool "Group CPU scheduler" diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 2efa8ea07ff7..7a22b4129211 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -61,7 +61,14 @@ struct mem_cgroup *root_mem_cgroup __read_mostly; #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP /* Turned on only when memory cgroup is enabled && really_do_swap_account = 1 */ int do_swap_account __read_mostly; -static int really_do_swap_account __initdata = 1; /* for remember boot option*/ + +/* for remember boot option*/ +#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED +static int really_do_swap_account __initdata = 1; +#else +static int really_do_swap_account __initdata = 0; +#endif + #else #define do_swap_account (0) #endif @@ -278,13 +285,14 @@ enum move_type { /* "mc" and its members are protected by cgroup_mutex */ static struct move_charge_struct { - spinlock_t lock; /* for from, to, moving_task */ + spinlock_t lock; /* for from, to */ struct mem_cgroup *from; struct mem_cgroup *to; unsigned long precharge; unsigned long moved_charge; unsigned long moved_swap; struct task_struct *moving_task; /* a task moving charges */ + struct mm_struct *mm; wait_queue_head_t waitq; /* a waitq for other context */ } mc = { .lock = __SPIN_LOCK_UNLOCKED(mc.lock), @@ -2152,7 +2160,7 @@ static void __mem_cgroup_move_account(struct page_cgroup *pc, { VM_BUG_ON(from == to); VM_BUG_ON(PageLRU(pc->page)); - VM_BUG_ON(!PageCgroupLocked(pc)); + VM_BUG_ON(!page_is_cgroup_locked(pc)); VM_BUG_ON(!PageCgroupUsed(pc)); VM_BUG_ON(pc->mem_cgroup != from); @@ -4631,7 +4639,7 @@ static unsigned long mem_cgroup_count_precharge(struct mm_struct *mm) unsigned long precharge; struct vm_area_struct *vma; - down_read(&mm->mmap_sem); + /* We've already held the mmap_sem */ for (vma = mm->mmap; vma; vma = vma->vm_next) { struct mm_walk mem_cgroup_count_precharge_walk = { .pmd_entry = mem_cgroup_count_precharge_pte_range, @@ -4643,7 +4651,6 @@ static unsigned long mem_cgroup_count_precharge(struct mm_struct *mm) walk_page_range(vma->vm_start, vma->vm_end, &mem_cgroup_count_precharge_walk); } - up_read(&mm->mmap_sem); precharge = mc.precharge; mc.precharge = 0; @@ -4694,11 +4701,16 @@ static void mem_cgroup_clear_mc(void) mc.moved_swap = 0; } + if (mc.mm) { + up_read(&mc.mm->mmap_sem); + mmput(mc.mm); + } spin_lock(&mc.lock); mc.from = NULL; mc.to = NULL; - mc.moving_task = NULL; spin_unlock(&mc.lock); + mc.moving_task = NULL; + mc.mm = NULL; mem_cgroup_end_move(from); memcg_oom_recover(from); memcg_oom_recover(to); @@ -4724,12 +4736,21 @@ static int mem_cgroup_can_attach(struct cgroup_subsys *ss, return 0; /* We move charges only when we move a owner of the mm */ if (mm->owner == p) { + /* + * We do all the move charge works under one mmap_sem to + * avoid deadlock with down_write(&mmap_sem) + * -> try_charge() -> if (mc.moving_task) -> sleep. + */ + down_read(&mm->mmap_sem); + VM_BUG_ON(mc.from); VM_BUG_ON(mc.to); VM_BUG_ON(mc.precharge); VM_BUG_ON(mc.moved_charge); VM_BUG_ON(mc.moved_swap); VM_BUG_ON(mc.moving_task); + VM_BUG_ON(mc.mm); + mem_cgroup_start_move(from); spin_lock(&mc.lock); mc.from = from; @@ -4737,14 +4758,16 @@ static int mem_cgroup_can_attach(struct cgroup_subsys *ss, mc.precharge = 0; mc.moved_charge = 0; mc.moved_swap = 0; - mc.moving_task = current; spin_unlock(&mc.lock); + mc.moving_task = current; + mc.mm = mm; ret = mem_cgroup_precharge_mc(mm); if (ret) mem_cgroup_clear_mc(); - } - mmput(mm); + /* We call up_read() and mmput() in clear_mc(). */ + } else + mmput(mm); } return ret; } @@ -4832,7 +4855,7 @@ static void mem_cgroup_move_charge(struct mm_struct *mm) struct vm_area_struct *vma; lru_add_drain_all(); - down_read(&mm->mmap_sem); + /* We've already held the mmap_sem */ for (vma = mm->mmap; vma; vma = vma->vm_next) { int ret; struct mm_walk mem_cgroup_move_charge_walk = { @@ -4851,7 +4874,6 @@ static void mem_cgroup_move_charge(struct mm_struct *mm) */ break; } - up_read(&mm->mmap_sem); } static void mem_cgroup_move_task(struct cgroup_subsys *ss, @@ -4860,17 +4882,11 @@ static void mem_cgroup_move_task(struct cgroup_subsys *ss, struct task_struct *p, bool threadgroup) { - struct mm_struct *mm; - - if (!mc.to) + if (!mc.mm) /* no need to move charge */ return; - mm = get_task_mm(p); - if (mm) { - mem_cgroup_move_charge(mm); - mmput(mm); - } + mem_cgroup_move_charge(mc.mm); mem_cgroup_clear_mc(); } #else /* !CONFIG_MMU */ @@ -4911,10 +4927,20 @@ struct cgroup_subsys mem_cgroup_subsys = { }; #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP +static int __init enable_swap_account(char *s) +{ + /* consider enabled if no parameter or 1 is given */ + if (!s || !strcmp(s, "1")) + really_do_swap_account = 1; + else if (!strcmp(s, "0")) + really_do_swap_account = 0; + return 1; +} +__setup("swapaccount", enable_swap_account); static int __init disable_swap_account(char *s) { - really_do_swap_account = 0; + enable_swap_account("0"); return 1; } __setup("noswapaccount", disable_swap_account); diff --git a/mm/nommu.c b/mm/nommu.c index 3613517c7592..27a9ac588516 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -1717,6 +1717,7 @@ void exit_mmap(struct mm_struct *mm) mm->mmap = vma->vm_next; delete_vma_from_mm(vma); delete_vma(mm, vma); + cond_resched(); } kleave(""); diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 07a654486f75..e4092704c1a9 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -3008,14 +3008,6 @@ static __init_refok int __build_all_zonelists(void *data) build_zonelist_cache(pgdat); } -#ifdef CONFIG_MEMORY_HOTPLUG - /* Setup real pagesets for the new zone */ - if (data) { - struct zone *zone = data; - setup_zone_pageset(zone); - } -#endif - /* * Initialize the boot_pagesets that are going to be used * for bootstrapping processors. The real pagesets for @@ -3064,7 +3056,11 @@ void build_all_zonelists(void *data) } else { /* we have to stop all cpus to guarantee there is no user of zonelist */ - stop_machine(__build_all_zonelists, data, NULL); +#ifdef CONFIG_MEMORY_HOTPLUG + if (data) + setup_zone_pageset((struct zone *)data); +#endif + stop_machine(__build_all_zonelists, NULL, NULL); /* cpuset refresh routine should be here */ } vm_total_pages = nr_free_pagecache_pages(); diff --git a/mm/pagewalk.c b/mm/pagewalk.c index 8b1a2ce21ee5..38cc58b8b2b0 100644 --- a/mm/pagewalk.c +++ b/mm/pagewalk.c @@ -139,7 +139,6 @@ int walk_page_range(unsigned long addr, unsigned long end, pgd_t *pgd; unsigned long next; int err = 0; - struct vm_area_struct *vma; if (addr >= end) return err; @@ -149,15 +148,17 @@ int walk_page_range(unsigned long addr, unsigned long end, pgd = pgd_offset(walk->mm, addr); do { + struct vm_area_struct *uninitialized_var(vma); + next = pgd_addr_end(addr, end); +#ifdef CONFIG_HUGETLB_PAGE /* * handle hugetlb vma individually because pagetable walk for * the hugetlb page is dependent on the architecture and * we can't handled it in the same manner as non-huge pages. */ vma = find_vma(walk->mm, addr); -#ifdef CONFIG_HUGETLB_PAGE if (vma && is_vm_hugetlb_page(vma)) { if (vma->vm_end < next) next = vma->vm_end; diff --git a/net/ceph/buffer.c b/net/ceph/buffer.c index 53d8abfa25d5..bf3e6a13c215 100644 --- a/net/ceph/buffer.c +++ b/net/ceph/buffer.c @@ -19,7 +19,7 @@ struct ceph_buffer *ceph_buffer_new(size_t len, gfp_t gfp) if (b->vec.iov_base) { b->is_vmalloc = false; } else { - b->vec.iov_base = __vmalloc(len, gfp, PAGE_KERNEL); + b->vec.iov_base = __vmalloc(len, gfp | __GFP_HIGHMEM, PAGE_KERNEL); if (!b->vec.iov_base) { kfree(b); return NULL; diff --git a/net/core/request_sock.c b/net/core/request_sock.c index 7552495aff7a..fceeb37d7161 100644 --- a/net/core/request_sock.c +++ b/net/core/request_sock.c @@ -45,9 +45,7 @@ int reqsk_queue_alloc(struct request_sock_queue *queue, nr_table_entries = roundup_pow_of_two(nr_table_entries + 1); lopt_size += nr_table_entries * sizeof(struct request_sock *); if (lopt_size > PAGE_SIZE) - lopt = __vmalloc(lopt_size, - GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO, - PAGE_KERNEL); + lopt = vzalloc(lopt_size); else lopt = kzalloc(lopt_size, GFP_KERNEL); if (lopt == NULL) diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c index 200eb538fbb3..0f280348e0fd 100644 --- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -365,7 +365,7 @@ static struct tnode *tnode_alloc(size_t size) if (size <= PAGE_SIZE) return kzalloc(size, GFP_KERNEL); else - return __vmalloc(size, GFP_KERNEL | __GFP_ZERO, PAGE_KERNEL); + return vzalloc(size); } static void __tnode_vfree(struct work_struct *arg) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 2fc35b32df9e..23cc8e1ce8d4 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -2758,13 +2758,13 @@ static int addrconf_ifdown(struct net_device *dev, int how) ifa->state = INET6_IFADDR_STATE_DEAD; spin_unlock_bh(&ifa->state_lock); - if (state == INET6_IFADDR_STATE_DEAD) { - in6_ifa_put(ifa); - } else { + if (state != INET6_IFADDR_STATE_DEAD) { __ipv6_ifa_notify(RTM_DELADDR, ifa); atomic_notifier_call_chain(&inet6addr_chain, NETDEV_DOWN, ifa); } + + in6_ifa_put(ifa); write_lock_bh(&idev->lock); } } diff --git a/net/xfrm/xfrm_hash.c b/net/xfrm/xfrm_hash.c index a2023ec52329..1e98bc0fe0a5 100644 --- a/net/xfrm/xfrm_hash.c +++ b/net/xfrm/xfrm_hash.c @@ -19,7 +19,7 @@ struct hlist_head *xfrm_hash_alloc(unsigned int sz) if (sz <= PAGE_SIZE) n = kzalloc(sz, GFP_KERNEL); else if (hashdist) - n = __vmalloc(sz, GFP_KERNEL | __GFP_ZERO, PAGE_KERNEL); + n = vzalloc(sz); else n = (struct hlist_head *) __get_free_pages(GFP_KERNEL | __GFP_NOWARN | __GFP_ZERO, diff --git a/scripts/gfp-translate b/scripts/gfp-translate index d81b968d864e..c9230e158a8f 100644 --- a/scripts/gfp-translate +++ b/scripts/gfp-translate @@ -63,7 +63,12 @@ fi # Extract GFP flags from the kernel source TMPFILE=`mktemp -t gfptranslate-XXXXXX` || exit 1 -grep "^#define __GFP" $SOURCE/include/linux/gfp.h | sed -e 's/(__force gfp_t)//' | sed -e 's/u)/)/' | grep -v GFP_BITS | sed -e 's/)\//) \//' > $TMPFILE +grep -q ___GFP $SOURCE/include/linux/gfp.h +if [ $? -eq 0 ]; then + grep "^#define ___GFP" $SOURCE/include/linux/gfp.h | sed -e 's/u$//' | grep -v GFP_BITS > $TMPFILE +else + grep "^#define __GFP" $SOURCE/include/linux/gfp.h | sed -e 's/(__force gfp_t)//' | sed -e 's/u)/)/' | grep -v GFP_BITS | sed -e 's/)\//) \//' > $TMPFILE +fi # Parse the flags IFS=" diff --git a/sound/atmel/abdac.c b/sound/atmel/abdac.c index f2f41c854221..6e2409181895 100644 --- a/sound/atmel/abdac.c +++ b/sound/atmel/abdac.c @@ -420,9 +420,9 @@ static int __devinit atmel_abdac_probe(struct platform_device *pdev) return PTR_ERR(pclk); } sample_clk = clk_get(&pdev->dev, "sample_clk"); - if (IS_ERR(pclk)) { + if (IS_ERR(sample_clk)) { dev_dbg(&pdev->dev, "no sample clock\n"); - retval = PTR_ERR(pclk); + retval = PTR_ERR(sample_clk); goto out_put_pclk; } clk_enable(pclk); diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index a1707cca9c66..b75db8e9cc0f 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -223,7 +223,7 @@ static void xrun_log(struct snd_pcm_substream *substream, entry->jiffies = jiffies; entry->pos = pos; entry->period_size = runtime->period_size; - entry->buffer_size = runtime->buffer_size;; + entry->buffer_size = runtime->buffer_size; entry->old_hw_ptr = runtime->status->hw_ptr; entry->hw_ptr_base = runtime->hw_ptr_base; log->idx = (log->idx + 1) % XRUN_LOG_CNT; diff --git a/sound/oss/dev_table.c b/sound/oss/dev_table.c index 727bdb9ba2dc..d8cf3e58dc76 100644 --- a/sound/oss/dev_table.c +++ b/sound/oss/dev_table.c @@ -71,7 +71,7 @@ int sound_install_audiodrv(int vers, char *name, struct audio_driver *driver, if (sound_nblocks >= MAX_MEM_BLOCKS) sound_nblocks = MAX_MEM_BLOCKS - 1; - op = (struct audio_operations *) (sound_mem_blocks[sound_nblocks] = vmalloc(sizeof(struct audio_operations))); + op = (struct audio_operations *) (sound_mem_blocks[sound_nblocks] = vzalloc(sizeof(struct audio_operations))); sound_nblocks++; if (sound_nblocks >= MAX_MEM_BLOCKS) sound_nblocks = MAX_MEM_BLOCKS - 1; @@ -81,7 +81,6 @@ int sound_install_audiodrv(int vers, char *name, struct audio_driver *driver, sound_unload_audiodev(num); return -(ENOMEM); } - memset((char *) op, 0, sizeof(struct audio_operations)); init_waitqueue_head(&op->in_sleeper); init_waitqueue_head(&op->out_sleeper); init_waitqueue_head(&op->poll_sleeper); @@ -128,7 +127,7 @@ int sound_install_mixer(int vers, char *name, struct mixer_operations *driver, /* FIXME: This leaks a mixer_operations struct every time its called until you unload sound! */ - op = (struct mixer_operations *) (sound_mem_blocks[sound_nblocks] = vmalloc(sizeof(struct mixer_operations))); + op = (struct mixer_operations *) (sound_mem_blocks[sound_nblocks] = vzalloc(sizeof(struct mixer_operations))); sound_nblocks++; if (sound_nblocks >= MAX_MEM_BLOCKS) sound_nblocks = MAX_MEM_BLOCKS - 1; @@ -137,7 +136,6 @@ int sound_install_mixer(int vers, char *name, struct mixer_operations *driver, printk(KERN_ERR "Sound: Can't allocate mixer driver for (%s)\n", name); return -ENOMEM; } - memset((char *) op, 0, sizeof(struct mixer_operations)); memcpy((char *) op, (char *) driver, driver_size); strlcpy(op->name, name, sizeof(op->name)); diff --git a/sound/oss/midibuf.c b/sound/oss/midibuf.c index 782b3b84dac6..ceedb1eff203 100644 --- a/sound/oss/midibuf.c +++ b/sound/oss/midibuf.c @@ -178,7 +178,7 @@ int MIDIbuf_open(int dev, struct file *file) return err; parms[dev].prech_timeout = MAX_SCHEDULE_TIMEOUT; - midi_in_buf[dev] = (struct midi_buf *) vmalloc(sizeof(struct midi_buf)); + midi_in_buf[dev] = vmalloc(sizeof(struct midi_buf)); if (midi_in_buf[dev] == NULL) { @@ -188,7 +188,7 @@ int MIDIbuf_open(int dev, struct file *file) } midi_in_buf[dev]->len = midi_in_buf[dev]->head = midi_in_buf[dev]->tail = 0; - midi_out_buf[dev] = (struct midi_buf *) vmalloc(sizeof(struct midi_buf)); + midi_out_buf[dev] = vmalloc(sizeof(struct midi_buf)); if (midi_out_buf[dev] == NULL) { diff --git a/sound/oss/pss.c b/sound/oss/pss.c index e19dd5dcc2de..9b800ce5100e 100644 --- a/sound/oss/pss.c +++ b/sound/oss/pss.c @@ -859,7 +859,7 @@ static int pss_coproc_ioctl(void *dev_info, unsigned int cmd, void __user *arg, return 0; case SNDCTL_COPR_LOAD: - buf = (copr_buffer *) vmalloc(sizeof(copr_buffer)); + buf = vmalloc(sizeof(copr_buffer)); if (buf == NULL) return -ENOSPC; if (copy_from_user(buf, arg, sizeof(copr_buffer))) { @@ -871,7 +871,7 @@ static int pss_coproc_ioctl(void *dev_info, unsigned int cmd, void __user *arg, return err; case SNDCTL_COPR_SENDMSG: - mbuf = (copr_msg *)vmalloc(sizeof(copr_msg)); + mbuf = vmalloc(sizeof(copr_msg)); if (mbuf == NULL) return -ENOSPC; if (copy_from_user(mbuf, arg, sizeof(copr_msg))) { @@ -895,7 +895,7 @@ static int pss_coproc_ioctl(void *dev_info, unsigned int cmd, void __user *arg, case SNDCTL_COPR_RCVMSG: err = 0; - mbuf = (copr_msg *)vmalloc(sizeof(copr_msg)); + mbuf = vmalloc(sizeof(copr_msg)); if (mbuf == NULL) return -ENOSPC; data = (unsigned short *)mbuf->data; diff --git a/sound/oss/sequencer.c b/sound/oss/sequencer.c index e85789e53816..5ea1098ac427 100644 --- a/sound/oss/sequencer.c +++ b/sound/oss/sequencer.c @@ -1646,13 +1646,13 @@ void sequencer_init(void) { if (sequencer_ok) return; - queue = (unsigned char *)vmalloc(SEQ_MAX_QUEUE * EV_SZ); + queue = vmalloc(SEQ_MAX_QUEUE * EV_SZ); if (queue == NULL) { printk(KERN_ERR "sequencer: Can't allocate memory for sequencer output queue\n"); return; } - iqueue = (unsigned char *)vmalloc(SEQ_MAX_QUEUE * IEV_SZ); + iqueue = vmalloc(SEQ_MAX_QUEUE * IEV_SZ); if (iqueue == NULL) { printk(KERN_ERR "sequencer: Can't allocate memory for sequencer input queue\n"); diff --git a/sound/pci/asihpi/hpioctl.c b/sound/pci/asihpi/hpioctl.c index 62895a719fcb..22dbd91811a4 100644 --- a/sound/pci/asihpi/hpioctl.c +++ b/sound/pci/asihpi/hpioctl.c @@ -435,7 +435,7 @@ void __devexit asihpi_adapter_remove(struct pci_dev *pci_dev) struct hpi_message hm; struct hpi_response hr; struct hpi_adapter *pa; - pa = (struct hpi_adapter *)pci_get_drvdata(pci_dev); + pa = pci_get_drvdata(pci_dev); hpi_init_message_response(&hm, &hr, HPI_OBJ_SUBSYSTEM, HPI_SUBSYS_DELETE_ADAPTER); diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c index 4679ed83a43b..2f3cacbd5528 100644 --- a/sound/pci/azt3328.c +++ b/sound/pci/azt3328.c @@ -1129,10 +1129,11 @@ snd_azf3328_codec_setdmaa(struct snd_azf3328 *chip, count_areas = size/2; addr_area2 = addr+count_areas; - count_areas--; /* max. index */ snd_azf3328_dbgcodec("setdma: buffers %08lx[%u] / %08lx[%u]\n", addr, count_areas, addr_area2, count_areas); + count_areas--; /* max. index */ + /* build combined I/O buffer length word */ lengths = (count_areas << 16) | (count_areas); spin_lock_irqsave(&chip->reg_lock, flags); @@ -1740,11 +1741,15 @@ static const struct snd_pcm_hardware snd_azf3328_hardware = .rate_max = AZF_FREQ_66200, .channels_min = 1, .channels_max = 2, - .buffer_bytes_max = 65536, - .period_bytes_min = 64, - .period_bytes_max = 65536, - .periods_min = 1, - .periods_max = 1024, + .buffer_bytes_max = (64*1024), + .period_bytes_min = 1024, + .period_bytes_max = (32*1024), + /* We simply have two DMA areas (instead of a list of descriptors + such as other cards); I believe that this is a fixed hardware + attribute and there isn't much driver magic to be done to expand it. + Thus indicate that we have at least and at most 2 periods. */ + .periods_min = 2, + .periods_max = 2, /* FIXME: maybe that card actually has a FIFO? * Hmm, it seems newer revisions do have one, but we still don't know * its size... */ @@ -1980,8 +1985,13 @@ snd_azf3328_timer_stop(struct snd_timer *timer) chip = snd_timer_chip(timer); spin_lock_irqsave(&chip->reg_lock, flags); /* disable timer countdown and interrupt */ - /* FIXME: should we write TIMER_IRQ_ACK here? */ - snd_azf3328_ctrl_outb(chip, IDX_IO_TIMER_VALUE + 3, 0); + /* Hmm, should we write TIMER_IRQ_ACK here? + YES indeed, otherwise a rogue timer operation - which prompts + ALSA(?) to call repeated stop() in vain, but NOT start() - + will never end (value 0x03 is kept shown in control byte). + Simply manually poking 0x04 _once_ immediately successfully stops + the hardware/ALSA interrupt activity. */ + snd_azf3328_ctrl_outb(chip, IDX_IO_TIMER_VALUE + 3, 0x04); spin_unlock_irqrestore(&chip->reg_lock, flags); snd_azf3328_dbgcallleave(); return 0; diff --git a/sound/pci/ctxfi/ctpcm.c b/sound/pci/ctxfi/ctpcm.c index 85ab43e89212..457d21189b0d 100644 --- a/sound/pci/ctxfi/ctpcm.c +++ b/sound/pci/ctxfi/ctpcm.c @@ -129,8 +129,6 @@ static int ct_pcm_playback_open(struct snd_pcm_substream *substream) apcm->substream = substream; apcm->interrupt = ct_atc_pcm_interrupt; - runtime->private_data = apcm; - runtime->private_free = ct_atc_pcm_free_substream; if (IEC958 == substream->pcm->device) { runtime->hw = ct_spdif_passthru_playback_hw; atc->spdif_out_passthru(atc, 1); @@ -155,8 +153,12 @@ static int ct_pcm_playback_open(struct snd_pcm_substream *substream) } apcm->timer = ct_timer_instance_new(atc->timer, apcm); - if (!apcm->timer) + if (!apcm->timer) { + kfree(apcm); return -ENOMEM; + } + runtime->private_data = apcm; + runtime->private_free = ct_atc_pcm_free_substream; return 0; } @@ -278,8 +280,6 @@ static int ct_pcm_capture_open(struct snd_pcm_substream *substream) apcm->started = 0; apcm->substream = substream; apcm->interrupt = ct_atc_pcm_interrupt; - runtime->private_data = apcm; - runtime->private_free = ct_atc_pcm_free_substream; runtime->hw = ct_pcm_capture_hw; runtime->hw.rate_max = atc->rsr * atc->msr; @@ -298,8 +298,12 @@ static int ct_pcm_capture_open(struct snd_pcm_substream *substream) } apcm->timer = ct_timer_instance_new(atc->timer, apcm); - if (!apcm->timer) + if (!apcm->timer) { + kfree(apcm); return -ENOMEM; + } + runtime->private_data = apcm; + runtime->private_free = ct_atc_pcm_free_substream; return 0; } diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 6361f752b5f3..846d1ead47fd 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -3100,6 +3100,7 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0402, "Dell Vostro", CXT5066_DELL_VOSTRO), SND_PCI_QUIRK(0x1028, 0x0408, "Dell Inspiron One 19T", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x103c, 0x360b, "HP G60", CXT5066_HP_LAPTOP), + SND_PCI_QUIRK(0x1043, 0x13f3, "Asus A52J", CXT5066_HP_LAPTOP), SND_PCI_QUIRK(0x1179, 0xff1e, "Toshiba Satellite C650D", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x1179, 0xff50, "Toshiba Satellite P500-PSPGSC-01800T", CXT5066_OLPC_XO_1_5), SND_PCI_QUIRK(0x1179, 0xffe0, "Toshiba Satellite Pro T130-15F", CXT5066_OLPC_XO_1_5), @@ -3110,6 +3111,7 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x21b2, "Thinkpad X100e", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x17aa, 0x21b3, "Thinkpad Edge 13 (197)", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x17aa, 0x21b4, "Thinkpad Edge", CXT5066_IDEAPAD), + SND_PCI_QUIRK(0x17aa, 0x21c8, "Thinkpad Edge 11", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo Thinkpad", CXT5066_THINKPAD), SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo G series", CXT5066_IDEAPAD), SND_PCI_QUIRK(0x17aa, 0x390a, "Lenovo S10-3t", CXT5066_IDEAPAD), diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 5f00589cb791..0ac6aed0c889 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -14623,7 +14623,10 @@ static int alc275_setup_dual_adc(struct hda_codec *codec) /* different alc269-variants */ enum { ALC269_TYPE_NORMAL, + ALC269_TYPE_ALC258, ALC269_TYPE_ALC259, + ALC269_TYPE_ALC269VB, + ALC269_TYPE_ALC270, ALC269_TYPE_ALC271X, }; @@ -15023,7 +15026,7 @@ static int alc269_fill_coef(struct hda_codec *codec) static int patch_alc269(struct hda_codec *codec) { struct alc_spec *spec; - int board_config; + int board_config, coef; int err; spec = kzalloc(sizeof(*spec), GFP_KERNEL); @@ -15034,14 +15037,23 @@ static int patch_alc269(struct hda_codec *codec) alc_auto_parse_customize_define(codec); - if ((alc_read_coef_idx(codec, 0) & 0x00f0) == 0x0010){ + coef = alc_read_coef_idx(codec, 0); + if ((coef & 0x00f0) == 0x0010) { if (codec->bus->pci->subsystem_vendor == 0x1025 && spec->cdefine.platform_type == 1) { alc_codec_rename(codec, "ALC271X"); spec->codec_variant = ALC269_TYPE_ALC271X; - } else { + } else if ((coef & 0xf000) == 0x1000) { + spec->codec_variant = ALC269_TYPE_ALC270; + } else if ((coef & 0xf000) == 0x2000) { alc_codec_rename(codec, "ALC259"); spec->codec_variant = ALC269_TYPE_ALC259; + } else if ((coef & 0xf000) == 0x3000) { + alc_codec_rename(codec, "ALC258"); + spec->codec_variant = ALC269_TYPE_ALC258; + } else { + alc_codec_rename(codec, "ALC269VB"); + spec->codec_variant = ALC269_TYPE_ALC269VB; } } else alc_fix_pll_init(codec, 0x20, 0x04, 15); @@ -15104,7 +15116,7 @@ static int patch_alc269(struct hda_codec *codec) spec->stream_digital_capture = &alc269_pcm_digital_capture; if (!spec->adc_nids) { /* wasn't filled automatically? use default */ - if (spec->codec_variant != ALC269_TYPE_NORMAL) { + if (spec->codec_variant == ALC269_TYPE_NORMAL) { spec->adc_nids = alc269_adc_nids; spec->num_adc_nids = ARRAY_SIZE(alc269_adc_nids); spec->capsrc_nids = alc269_capsrc_nids; @@ -19298,6 +19310,7 @@ static const struct alc_fixup alc662_fixups[] = { static struct snd_pci_quirk alc662_fixup_tbl[] = { SND_PCI_QUIRK(0x1025, 0x038b, "Acer Aspire 8943G", ALC662_FIXUP_ASPIRE), + SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD), SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD), SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Ideapad Y550", ALC662_FIXUP_IDEAPAD), {} @@ -19419,7 +19432,10 @@ static int patch_alc888(struct hda_codec *codec) { if ((alc_read_coef_idx(codec, 0) & 0x00f0)==0x0030){ kfree(codec->chip_name); - codec->chip_name = kstrdup("ALC888-VD", GFP_KERNEL); + if (codec->vendor_id == 0x10ec0887) + codec->chip_name = kstrdup("ALC887-VD", GFP_KERNEL); + else + codec->chip_name = kstrdup("ALC888-VD", GFP_KERNEL); if (!codec->chip_name) { alc_free(codec); return -ENOMEM; @@ -19909,7 +19925,7 @@ static struct hda_codec_preset snd_hda_preset_realtek[] = { { .id = 0x10ec0885, .rev = 0x100103, .name = "ALC889A", .patch = patch_alc882 }, { .id = 0x10ec0885, .name = "ALC885", .patch = patch_alc882 }, - { .id = 0x10ec0887, .name = "ALC887", .patch = patch_alc882 }, + { .id = 0x10ec0887, .name = "ALC887", .patch = patch_alc888 }, { .id = 0x10ec0888, .rev = 0x100101, .name = "ALC1200", .patch = patch_alc882 }, { .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc888 }, diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 93fa59cc60ef..5c710807dfe5 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -389,6 +389,11 @@ static hda_nid_t stac92hd83xxx_dmic_nids[STAC92HD83XXX_NUM_DMICS + 1] = { 0x11, 0x20, 0 }; +#define STAC92HD87B_NUM_DMICS 1 +static hda_nid_t stac92hd87b_dmic_nids[STAC92HD87B_NUM_DMICS + 1] = { + 0x11, 0 +}; + #define STAC92HD83XXX_NUM_CAPS 2 static unsigned long stac92hd83xxx_capvols[] = { HDA_COMPOSE_AMP_VAL(0x17, 3, 0, HDA_OUTPUT), @@ -3486,10 +3491,8 @@ static int stac92xx_auto_create_dmic_input_ctls(struct hda_codec *codec, return err; } - if (snd_hda_get_bool_hint(codec, "separate_dmux") != 1) { + if (snd_hda_get_bool_hint(codec, "separate_dmux") != 1) snd_hda_add_imux_item(imux, label, index, NULL); - spec->num_analog_muxes++; - } } return 0; @@ -5452,12 +5455,17 @@ again: stac92hd83xxx_brd_tbl[spec->board_config]); switch (codec->vendor_id) { + case 0x111d76d1: + case 0x111d76d9: + spec->dmic_nids = stac92hd87b_dmic_nids; + spec->num_dmics = stac92xx_connected_ports(codec, + stac92hd87b_dmic_nids, + STAC92HD87B_NUM_DMICS); + /* Fall through */ case 0x111d7666: case 0x111d7667: case 0x111d7668: case 0x111d7669: - case 0x111d76d1: - case 0x111d76d9: spec->num_pins = ARRAY_SIZE(stac92hd88xxx_pin_nids); spec->pin_nids = stac92hd88xxx_pin_nids; spec->mono_nid = 0; diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index 400f9ebd243e..629a5494347a 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -1866,6 +1866,12 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = { }, { .subvendor = 0x1028, + .subdevice = 0x0182, + .name = "Dell Latitude D610", /* STAC9750/51 */ + .type = AC97_TUNE_HP_ONLY + }, + { + .subvendor = 0x1028, .subdevice = 0x0186, .name = "Dell Latitude D810", /* cf. Malone #41015 */ .type = AC97_TUNE_HP_MUTE_LED diff --git a/sound/pci/mixart/mixart_hwdep.h b/sound/pci/mixart/mixart_hwdep.h index a46f5083db99..812e288ef2e7 100644 --- a/sound/pci/mixart/mixart_hwdep.h +++ b/sound/pci/mixart/mixart_hwdep.h @@ -25,11 +25,21 @@ #include <sound/hwdep.h> +#ifndef readl_be #define readl_be(x) be32_to_cpu(__raw_readl(x)) +#endif + +#ifndef writel_be #define writel_be(data,addr) __raw_writel(cpu_to_be32(data),addr) +#endif +#ifndef readl_le #define readl_le(x) le32_to_cpu(__raw_readl(x)) +#endif + +#ifndef writel_le #define writel_le(data,addr) __raw_writel(cpu_to_le32(data),addr) +#endif #define MIXART_MEM(mgr,x) ((mgr)->mem[0].virt + (x)) #define MIXART_REG(mgr,x) ((mgr)->mem[1].virt + (x)) diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c index 85081172403f..b47cfd45b3b9 100644 --- a/sound/ppc/pmac.c +++ b/sound/ppc/pmac.c @@ -1228,10 +1228,8 @@ int __devinit snd_pmac_new(struct snd_card *card, struct snd_pmac **chip_return) chip->rsrc[i].start + 1, rnames[i]) == NULL) { printk(KERN_ERR "snd: can't request rsrc " - " %d (%s: 0x%016llx:%016llx)\n", - i, rnames[i], - (unsigned long long)chip->rsrc[i].start, - (unsigned long long)chip->rsrc[i].end); + " %d (%s: %pR)\n", + i, rnames[i], &chip->rsrc[i]); err = -ENODEV; goto __error; } @@ -1256,10 +1254,8 @@ int __devinit snd_pmac_new(struct snd_card *card, struct snd_pmac **chip_return) chip->rsrc[i].start + 1, rnames[i]) == NULL) { printk(KERN_ERR "snd: can't request rsrc " - " %d (%s: 0x%016llx:%016llx)\n", - i, rnames[i], - (unsigned long long)chip->rsrc[i].start, - (unsigned long long)chip->rsrc[i].end); + " %d (%s: %pR)\n", + i, rnames[i], &chip->rsrc[i]); err = -ENODEV; goto __error; } diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig index e720d5e6f04c..bee3c94f58b0 100644 --- a/sound/soc/atmel/Kconfig +++ b/sound/soc/atmel/Kconfig @@ -16,7 +16,8 @@ config SND_ATMEL_SOC_SSC config SND_AT91_SOC_SAM9G20_WM8731 tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board" - depends on ATMEL_SSC && ARCH_AT91SAM9G20 && SND_ATMEL_SOC + depends on ATMEL_SSC && ARCH_AT91SAM9G20 && SND_ATMEL_SOC && \ + AT91_PROGRAMMABLE_CLOCKS select SND_ATMEL_SOC_SSC select SND_SOC_WM8731 help @@ -25,7 +26,7 @@ config SND_AT91_SOC_SAM9G20_WM8731 config SND_AT32_SOC_PLAYPAQ tristate "SoC Audio support for PlayPaq with WM8510" - depends on SND_ATMEL_SOC && BOARD_PLAYPAQ + depends on SND_ATMEL_SOC && BOARD_PLAYPAQ && AT91_PROGRAMMABLE_CLOCKS select SND_ATMEL_SOC_SSC select SND_SOC_WM8510 help diff --git a/sound/soc/codecs/max98088.c b/sound/soc/codecs/max98088.c index bc22ee93a75d..470cb93b1d1f 100644 --- a/sound/soc/codecs/max98088.c +++ b/sound/soc/codecs/max98088.c @@ -28,6 +28,11 @@ #include <sound/max98088.h> #include "max98088.h" +enum max98088_type { + MAX98088, + MAX98089, +}; + struct max98088_cdata { unsigned int rate; unsigned int fmt; @@ -36,6 +41,7 @@ struct max98088_cdata { struct max98088_priv { u8 reg_cache[M98088_REG_CNT]; + enum max98088_type devtype; void *control_data; struct max98088_pdata *pdata; unsigned int sysclk; @@ -2040,6 +2046,8 @@ static int max98088_i2c_probe(struct i2c_client *i2c, if (max98088 == NULL) return -ENOMEM; + max98088->devtype = id->driver_data; + i2c_set_clientdata(i2c, max98088); max98088->control_data = i2c; max98088->pdata = i2c->dev.platform_data; @@ -2059,7 +2067,8 @@ static int __devexit max98088_i2c_remove(struct i2c_client *client) } static const struct i2c_device_id max98088_i2c_id[] = { - { "max98088", 0 }, + { "max98088", MAX98088 }, + { "max98089", MAX98089 }, { } }; MODULE_DEVICE_TABLE(i2c, max98088_i2c_id); diff --git a/sound/soc/codecs/uda134x.c b/sound/soc/codecs/uda134x.c index 7540a509a6f5..464f0cfa4c7a 100644 --- a/sound/soc/codecs/uda134x.c +++ b/sound/soc/codecs/uda134x.c @@ -597,6 +597,7 @@ static struct snd_soc_codec_driver soc_codec_dev_uda134x = { .resume = uda134x_soc_resume, .reg_cache_size = sizeof(uda134x_reg), .reg_word_size = sizeof(u8), + .reg_cache_default = uda134x_reg, .reg_cache_step = 1, .read = uda134x_read_reg_cache, .write = uda134x_write, diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c index f4f1fba38eb9..7611add7f8c3 100644 --- a/sound/soc/codecs/wm8350.c +++ b/sound/soc/codecs/wm8350.c @@ -831,7 +831,7 @@ static int wm8350_set_dai_sysclk(struct snd_soc_dai *codec_dai, } /* MCLK direction */ - if (dir == WM8350_MCLK_DIR_OUT) + if (dir == SND_SOC_CLOCK_OUT) wm8350_set_bits(wm8350, WM8350_CLOCK_CONTROL_2, WM8350_MCLK_DIR); else @@ -1586,6 +1586,13 @@ static int wm8350_codec_probe(struct snd_soc_codec *codec) wm8350_set_bits(wm8350, WM8350_ROUT2_VOLUME, WM8350_OUT2_VU | WM8350_OUT2R_MUTE); + /* Make sure AIF tristating is disabled by default */ + wm8350_clear_bits(wm8350, WM8350_AI_FORMATING, WM8350_AIF_TRI); + + /* Make sure we've got a sane companding setup too */ + wm8350_clear_bits(wm8350, WM8350_ADC_DAC_COMP, + WM8350_DAC_COMP | WM8350_LOOPBACK); + /* Make sure jack detect is disabled to start off with */ wm8350_clear_bits(wm8350, WM8350_JACK_DETECT, WM8350_JDL_ENA | WM8350_JDR_ENA); diff --git a/sound/soc/codecs/wm8776.c b/sound/soc/codecs/wm8776.c index 04182c464e35..0132a27140ae 100644 --- a/sound/soc/codecs/wm8776.c +++ b/sound/soc/codecs/wm8776.c @@ -34,7 +34,6 @@ /* codec private data */ struct wm8776_priv { enum snd_soc_control_type control_type; - u16 reg_cache[WM8776_CACHEREGNUM]; int sysclk[2]; }; diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 894d0cd3aa9b..e8092745a207 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -3500,8 +3500,11 @@ static ssize_t wm8962_beep_set(struct device *dev, { struct wm8962_priv *wm8962 = dev_get_drvdata(dev); long int time; + int ret; - strict_strtol(buf, 10, &time); + ret = strict_strtol(buf, 10, &time); + if (ret != 0) + return ret; input_event(wm8962->beep, EV_SND, SND_TONE, time); diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 0db59c3aa5d4..830dfdd66c5f 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -3903,6 +3903,8 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec) return -ENOMEM; snd_soc_codec_set_drvdata(codec, wm8994); + codec->reg_cache = &wm8994->reg_cache; + wm8994->pdata = dev_get_platdata(codec->dev->parent); wm8994->codec = codec; diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c index 2b07b17a6b2d..bc9e6b0b3f6f 100644 --- a/sound/soc/davinci/davinci-evm.c +++ b/sound/soc/davinci/davinci-evm.c @@ -157,12 +157,23 @@ static int evm_aic3x_init(struct snd_soc_pcm_runtime *rtd) } /* davinci-evm digital audio interface glue - connects codec <--> CPU */ -static struct snd_soc_dai_link evm_dai = { +static struct snd_soc_dai_link dm6446_evm_dai = { .name = "TLV320AIC3X", .stream_name = "AIC3X", - .cpu_dai_name = "davinci-mcasp.0", + .cpu_dai_name = "davinci-mcbsp", .codec_dai_name = "tlv320aic3x-hifi", - .codec_name = "tlv320aic3x-codec.0-001a", + .codec_name = "tlv320aic3x-codec.1-001b", + .platform_name = "davinci-pcm-audio", + .init = evm_aic3x_init, + .ops = &evm_ops, +}; + +static struct snd_soc_dai_link dm355_evm_dai = { + .name = "TLV320AIC3X", + .stream_name = "AIC3X", + .cpu_dai_name = "davinci-mcbsp.1", + .codec_dai_name = "tlv320aic3x-hifi", + .codec_name = "tlv320aic3x-codec.1-001b", .platform_name = "davinci-pcm-audio", .init = evm_aic3x_init, .ops = &evm_ops, @@ -172,10 +183,10 @@ static struct snd_soc_dai_link dm365_evm_dai = { #ifdef CONFIG_SND_DM365_AIC3X_CODEC .name = "TLV320AIC3X", .stream_name = "AIC3X", - .cpu_dai_name = "davinci-i2s", + .cpu_dai_name = "davinci-mcbsp", .codec_dai_name = "tlv320aic3x-hifi", .init = evm_aic3x_init, - .codec_name = "tlv320aic3x-codec.0-001a", + .codec_name = "tlv320aic3x-codec.1-0018", .ops = &evm_ops, #elif defined(CONFIG_SND_DM365_VOICE_CODEC) .name = "Voice Codec - CQ93VC", @@ -219,10 +230,17 @@ static struct snd_soc_dai_link da8xx_evm_dai = { .ops = &evm_ops, }; -/* davinci dm6446, dm355 evm audio machine driver */ -static struct snd_soc_card snd_soc_card_evm = { - .name = "DaVinci EVM", - .dai_link = &evm_dai, +/* davinci dm6446 evm audio machine driver */ +static struct snd_soc_card dm6446_snd_soc_card_evm = { + .name = "DaVinci DM6446 EVM", + .dai_link = &dm6446_evm_dai, + .num_links = 1, +}; + +/* davinci dm355 evm audio machine driver */ +static struct snd_soc_card dm355_snd_soc_card_evm = { + .name = "DaVinci DM355 EVM", + .dai_link = &dm355_evm_dai, .num_links = 1, }; @@ -261,10 +279,10 @@ static int __init evm_init(void) int ret; if (machine_is_davinci_evm()) { - evm_snd_dev_data = &snd_soc_card_evm; + evm_snd_dev_data = &dm6446_snd_soc_card_evm; index = 0; } else if (machine_is_davinci_dm355_evm()) { - evm_snd_dev_data = &snd_soc_card_evm; + evm_snd_dev_data = &dm355_snd_soc_card_evm; index = 1; } else if (machine_is_davinci_dm365_evm()) { evm_snd_dev_data = &dm365_snd_soc_card_evm; diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/davinci/davinci-i2s.c index d46b545d41f4..9e0e565e6ed9 100644 --- a/sound/soc/davinci/davinci-i2s.c +++ b/sound/soc/davinci/davinci-i2s.c @@ -426,9 +426,6 @@ static int davinci_i2s_hw_params(struct snd_pcm_substream *substream, snd_pcm_format_t fmt; unsigned element_cnt = 1; - dai->capture_dma_data = dev->dma_params; - dai->playback_dma_data = dev->dma_params; - /* general line settings */ spcr = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG); if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) { @@ -601,6 +598,15 @@ static int davinci_i2s_trigger(struct snd_pcm_substream *substream, int cmd, return ret; } +static int davinci_i2s_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct davinci_mcbsp_dev *dev = snd_soc_dai_get_drvdata(dai); + + snd_soc_dai_set_dma_data(dai, substream, dev->dma_params); + return 0; +} + static void davinci_i2s_shutdown(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { @@ -612,6 +618,7 @@ static void davinci_i2s_shutdown(struct snd_pcm_substream *substream, #define DAVINCI_I2S_RATES SNDRV_PCM_RATE_8000_96000 static struct snd_soc_dai_ops davinci_i2s_dai_ops = { + .startup = davinci_i2s_startup, .shutdown = davinci_i2s_shutdown, .prepare = davinci_i2s_prepare, .trigger = davinci_i2s_trigger, @@ -749,7 +756,7 @@ static struct platform_driver davinci_mcbsp_driver = { .probe = davinci_i2s_probe, .remove = davinci_i2s_remove, .driver = { - .name = "davinci-i2s", + .name = "davinci-mcbsp", .owner = THIS_MODULE, }, }; diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c index 86918ee12419..fb55d2c5d704 100644 --- a/sound/soc/davinci/davinci-mcasp.c +++ b/sound/soc/davinci/davinci-mcasp.c @@ -715,9 +715,6 @@ static int davinci_mcasp_hw_params(struct snd_pcm_substream *substream, int word_length; u8 fifo_level; - cpu_dai->capture_dma_data = dev->dma_params; - cpu_dai->playback_dma_data = dev->dma_params; - davinci_hw_common_param(dev, substream->stream); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) fifo_level = dev->txnumevt; @@ -799,7 +796,17 @@ static int davinci_mcasp_trigger(struct snd_pcm_substream *substream, return ret; } +static int davinci_mcasp_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct davinci_audio_dev *dev = snd_soc_dai_get_drvdata(dai); + + snd_soc_dai_set_dma_data(dai, substream, dev->dma_params); + return 0; +} + static struct snd_soc_dai_ops davinci_mcasp_dai_ops = { + .startup = davinci_mcasp_startup, .trigger = davinci_mcasp_trigger, .hw_params = davinci_mcasp_hw_params, .set_fmt = davinci_mcasp_set_dai_fmt, diff --git a/sound/soc/davinci/davinci-sffsdr.c b/sound/soc/davinci/davinci-sffsdr.c index 009b6521a1bf..6c6666a1f942 100644 --- a/sound/soc/davinci/davinci-sffsdr.c +++ b/sound/soc/davinci/davinci-sffsdr.c @@ -84,7 +84,7 @@ static struct snd_soc_ops sffsdr_ops = { static struct snd_soc_dai_link sffsdr_dai = { .name = "PCM3008", /* Codec name */ .stream_name = "PCM3008 HiFi", - .cpu_dai_name = "davinci-asp.0", + .cpu_dai_name = "davinci-mcbsp", .codec_dai_name = "pcm3008-hifi", .codec_name = "pcm3008-codec", .platform_name = "davinci-pcm-audio", diff --git a/sound/soc/davinci/davinci-vcif.c b/sound/soc/davinci/davinci-vcif.c index ea232f6a2c21..fb4cc1edf339 100644 --- a/sound/soc/davinci/davinci-vcif.c +++ b/sound/soc/davinci/davinci-vcif.c @@ -97,9 +97,6 @@ static int davinci_vcif_hw_params(struct snd_pcm_substream *substream, &davinci_vcif_dev->dma_params[substream->stream]; u32 w; - dai->capture_dma_data = davinci_vcif_dev->dma_params; - dai->playback_dma_data = davinci_vcif_dev->dma_params; - /* Restart the codec before setup */ davinci_vcif_stop(substream); davinci_vcif_start(substream); @@ -174,9 +171,19 @@ static int davinci_vcif_trigger(struct snd_pcm_substream *substream, int cmd, return ret; } +static int davinci_vcif_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct davinci_vcif_dev *dev = snd_soc_dai_get_drvdata(dai); + + snd_soc_dai_set_dma_data(dai, substream, dev->dma_params); + return 0; +} + #define DAVINCI_VCIF_RATES SNDRV_PCM_RATE_8000_48000 static struct snd_soc_dai_ops davinci_vcif_dai_ops = { + .startup = davinci_vcif_startup, .trigger = davinci_vcif_trigger, .hw_params = davinci_vcif_hw_params, }; diff --git a/sound/soc/fsl/mpc5200_psc_i2s.c b/sound/soc/fsl/mpc5200_psc_i2s.c index 74ffed41340f..9018fa5bf0db 100644 --- a/sound/soc/fsl/mpc5200_psc_i2s.c +++ b/sound/soc/fsl/mpc5200_psc_i2s.c @@ -160,7 +160,7 @@ static int __devinit psc_i2s_of_probe(struct platform_device *op, rc = snd_soc_register_dais(&op->dev, psc_i2s_dai, ARRAY_SIZE(psc_i2s_dai)); if (rc != 0) { pr_err("Failed to register DAI\n"); - return 0; + return rc; } psc_dma = dev_get_drvdata(&op->dev); diff --git a/sound/soc/imx/eukrea-tlv320.c b/sound/soc/imx/eukrea-tlv320.c index b59675257ce5..dd4fffdbd177 100644 --- a/sound/soc/imx/eukrea-tlv320.c +++ b/sound/soc/imx/eukrea-tlv320.c @@ -34,8 +34,8 @@ static int eukrea_tlv320_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; - struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; int ret; ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | @@ -79,10 +79,10 @@ static struct snd_soc_ops eukrea_tlv320_snd_ops = { static struct snd_soc_dai_link eukrea_tlv320_dai = { .name = "tlv320aic23", .stream_name = "TLV320AIC23", - .codec_dai = "tlv320aic23-hifi", + .codec_dai_name = "tlv320aic23-hifi", .platform_name = "imx-pcm-audio.0", .codec_name = "tlv320aic23-codec.0-001a", - .cpu_dai = "imx-ssi.0", + .cpu_dai_name = "imx-ssi.0", .ops = &eukrea_tlv320_snd_ops, }; diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/imx/imx-pcm-dma-mx2.c index fd493ee1428e..671ef8dd524c 100644 --- a/sound/soc/imx/imx-pcm-dma-mx2.c +++ b/sound/soc/imx/imx-pcm-dma-mx2.c @@ -20,6 +20,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/slab.h> +#include <linux/dmaengine.h> #include <sound/core.h> #include <sound/initval.h> @@ -27,165 +28,146 @@ #include <sound/pcm_params.h> #include <sound/soc.h> -#include <mach/dma-mx1-mx2.h> +#include <mach/dma.h> #include "imx-ssi.h" struct imx_pcm_runtime_data { - int sg_count; - struct scatterlist *sg_list; - int period; + int period_bytes; int periods; - unsigned long dma_addr; int dma; - struct snd_pcm_substream *substream; unsigned long offset; unsigned long size; - unsigned long period_cnt; void *buf; int period_time; + struct dma_async_tx_descriptor *desc; + struct dma_chan *dma_chan; + struct imx_dma_data dma_data; }; -/* Called by the DMA framework when a period has elapsed */ -static void imx_ssi_dma_progression(int channel, void *data, - struct scatterlist *sg) +static void audio_dma_irq(void *data) { - struct snd_pcm_substream *substream = data; + struct snd_pcm_substream *substream = (struct snd_pcm_substream *)data; struct snd_pcm_runtime *runtime = substream->runtime; struct imx_pcm_runtime_data *iprtd = runtime->private_data; - if (!sg) - return; - - runtime = iprtd->substream->runtime; + iprtd->offset += iprtd->period_bytes; + iprtd->offset %= iprtd->period_bytes * iprtd->periods; - iprtd->offset = sg->dma_address - runtime->dma_addr; - - snd_pcm_period_elapsed(iprtd->substream); + snd_pcm_period_elapsed(substream); } -static void imx_ssi_dma_callback(int channel, void *data) +static bool filter(struct dma_chan *chan, void *param) { - pr_err("%s shouldn't be called\n", __func__); -} + struct imx_pcm_runtime_data *iprtd = param; -static void snd_imx_dma_err_callback(int channel, void *data, int err) -{ - struct snd_pcm_substream *substream = data; - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct imx_pcm_dma_params *dma_params = - snd_soc_dai_get_dma_data(rtd->dai->cpu_dai, substream); - struct snd_pcm_runtime *runtime = substream->runtime; - struct imx_pcm_runtime_data *iprtd = runtime->private_data; - int ret; + if (!imx_dma_is_general_purpose(chan)) + return false; - pr_err("DMA timeout on channel %d -%s%s%s%s\n", - channel, - err & IMX_DMA_ERR_BURST ? " burst" : "", - err & IMX_DMA_ERR_REQUEST ? " request" : "", - err & IMX_DMA_ERR_TRANSFER ? " transfer" : "", - err & IMX_DMA_ERR_BUFFER ? " buffer" : ""); + chan->private = &iprtd->dma_data; - imx_dma_disable(iprtd->dma); - ret = imx_dma_setup_sg(iprtd->dma, iprtd->sg_list, iprtd->sg_count, - IMX_DMA_LENGTH_LOOP, dma_params->dma_addr, - substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? - DMA_MODE_WRITE : DMA_MODE_READ); - if (!ret) - imx_dma_enable(iprtd->dma); + return true; } -static int imx_ssi_dma_alloc(struct snd_pcm_substream *substream) +static int imx_ssi_dma_alloc(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct imx_pcm_dma_params *dma_params; struct snd_pcm_runtime *runtime = substream->runtime; struct imx_pcm_runtime_data *iprtd = runtime->private_data; + struct dma_slave_config slave_config; + dma_cap_mask_t mask; + enum dma_slave_buswidth buswidth; int ret; dma_params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); - iprtd->dma = imx_dma_request_by_prio(DRV_NAME, DMA_PRIO_HIGH); - if (iprtd->dma < 0) { - pr_err("Failed to claim the audio DMA\n"); - return -ENODEV; - } + iprtd->dma_data.peripheral_type = IMX_DMATYPE_SSI; + iprtd->dma_data.priority = DMA_PRIO_HIGH; + iprtd->dma_data.dma_request = dma_params->dma; - ret = imx_dma_setup_handlers(iprtd->dma, - imx_ssi_dma_callback, - snd_imx_dma_err_callback, substream); - if (ret) - goto out; + /* Try to grab a DMA channel */ + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + iprtd->dma_chan = dma_request_channel(mask, filter, iprtd); + if (!iprtd->dma_chan) + return -EINVAL; - ret = imx_dma_setup_progression_handler(iprtd->dma, - imx_ssi_dma_progression); - if (ret) { - pr_err("Failed to setup the DMA handler\n"); - goto out; + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES; + break; + case SNDRV_PCM_FORMAT_S20_3LE: + case SNDRV_PCM_FORMAT_S24_LE: + buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES; + break; + default: + return 0; } - ret = imx_dma_config_channel(iprtd->dma, - IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO, - IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR, - dma_params->dma, 1); - if (ret < 0) { - pr_err("Cannot configure DMA channel: %d\n", ret); - goto out; + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + slave_config.direction = DMA_TO_DEVICE; + slave_config.dst_addr = dma_params->dma_addr; + slave_config.dst_addr_width = buswidth; + slave_config.dst_maxburst = dma_params->burstsize; + } else { + slave_config.direction = DMA_FROM_DEVICE; + slave_config.src_addr = dma_params->dma_addr; + slave_config.src_addr_width = buswidth; + slave_config.src_maxburst = dma_params->burstsize; } - imx_dma_config_burstlen(iprtd->dma, dma_params->burstsize * 2); + ret = dmaengine_slave_config(iprtd->dma_chan, &slave_config); + if (ret) + return ret; return 0; -out: - imx_dma_free(iprtd->dma); - return ret; } static int snd_imx_pcm_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { + struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_pcm_runtime *runtime = substream->runtime; struct imx_pcm_runtime_data *iprtd = runtime->private_data; - int i; unsigned long dma_addr; + struct dma_chan *chan; + struct imx_pcm_dma_params *dma_params; + int ret; - imx_ssi_dma_alloc(substream); + dma_params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); + ret = imx_ssi_dma_alloc(substream, params); + if (ret) + return ret; + chan = iprtd->dma_chan; iprtd->size = params_buffer_bytes(params); iprtd->periods = params_periods(params); - iprtd->period = params_period_bytes(params); + iprtd->period_bytes = params_period_bytes(params); iprtd->offset = 0; iprtd->period_time = HZ / (params_rate(params) / params_period_size(params)); snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); - if (iprtd->sg_count != iprtd->periods) { - kfree(iprtd->sg_list); - - iprtd->sg_list = kcalloc(iprtd->periods + 1, - sizeof(struct scatterlist), GFP_KERNEL); - if (!iprtd->sg_list) - return -ENOMEM; - iprtd->sg_count = iprtd->periods + 1; - } - - sg_init_table(iprtd->sg_list, iprtd->sg_count); dma_addr = runtime->dma_addr; - for (i = 0; i < iprtd->periods; i++) { - iprtd->sg_list[i].page_link = 0; - iprtd->sg_list[i].offset = 0; - iprtd->sg_list[i].dma_address = dma_addr; - iprtd->sg_list[i].length = iprtd->period; - dma_addr += iprtd->period; + iprtd->buf = (unsigned int *)substream->dma_buffer.area; + + iprtd->desc = chan->device->device_prep_dma_cyclic(chan, dma_addr, + iprtd->period_bytes * iprtd->periods, + iprtd->period_bytes, + substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? + DMA_TO_DEVICE : DMA_FROM_DEVICE); + if (!iprtd->desc) { + dev_err(&chan->dev->device, "cannot prepare slave dma\n"); + return -EINVAL; } - /* close the loop */ - iprtd->sg_list[iprtd->sg_count - 1].offset = 0; - iprtd->sg_list[iprtd->sg_count - 1].length = 0; - iprtd->sg_list[iprtd->sg_count - 1].page_link = - ((unsigned long) iprtd->sg_list | 0x01) & ~0x02; + iprtd->desc->callback = audio_dma_irq; + iprtd->desc->callback_param = substream; + return 0; } @@ -194,41 +176,21 @@ static int snd_imx_pcm_hw_free(struct snd_pcm_substream *substream) struct snd_pcm_runtime *runtime = substream->runtime; struct imx_pcm_runtime_data *iprtd = runtime->private_data; - if (iprtd->dma >= 0) { - imx_dma_free(iprtd->dma); - iprtd->dma = -EINVAL; + if (iprtd->dma_chan) { + dma_release_channel(iprtd->dma_chan); + iprtd->dma_chan = NULL; } - kfree(iprtd->sg_list); - iprtd->sg_list = NULL; - return 0; } static int snd_imx_pcm_prepare(struct snd_pcm_substream *substream) { - struct snd_pcm_runtime *runtime = substream->runtime; struct snd_soc_pcm_runtime *rtd = substream->private_data; struct imx_pcm_dma_params *dma_params; - struct imx_pcm_runtime_data *iprtd = runtime->private_data; - int err; dma_params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); - iprtd->substream = substream; - iprtd->buf = (unsigned int *)substream->dma_buffer.area; - iprtd->period_cnt = 0; - - pr_debug("%s: buf: %p period: %d periods: %d\n", - __func__, iprtd->buf, iprtd->period, iprtd->periods); - - err = imx_dma_setup_sg(iprtd->dma, iprtd->sg_list, iprtd->sg_count, - IMX_DMA_LENGTH_LOOP, dma_params->dma_addr, - substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? - DMA_MODE_WRITE : DMA_MODE_READ); - if (err) - return err; - return 0; } @@ -241,14 +203,14 @@ static int snd_imx_pcm_trigger(struct snd_pcm_substream *substream, int cmd) case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - imx_dma_enable(iprtd->dma); + dmaengine_submit(iprtd->desc); break; case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_SUSPEND: case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - imx_dma_disable(iprtd->dma); + dmaengine_terminate_all(iprtd->dma_chan); break; default: @@ -263,6 +225,9 @@ static snd_pcm_uframes_t snd_imx_pcm_pointer(struct snd_pcm_substream *substream struct snd_pcm_runtime *runtime = substream->runtime; struct imx_pcm_runtime_data *iprtd = runtime->private_data; + pr_debug("%s: %ld %ld\n", __func__, iprtd->offset, + bytes_to_frames(substream->runtime, iprtd->offset)); + return bytes_to_frames(substream->runtime, iprtd->offset); } @@ -279,7 +244,7 @@ static struct snd_pcm_hardware snd_imx_hardware = { .channels_max = 2, .buffer_bytes_max = IMX_SSI_DMABUF_SIZE, .period_bytes_min = 128, - .period_bytes_max = 16 * 1024, + .period_bytes_max = 65535, /* Limited by SDMA engine */ .periods_min = 2, .periods_max = 255, .fifo_size = 0, @@ -304,11 +269,23 @@ static int snd_imx_open(struct snd_pcm_substream *substream) } snd_soc_set_runtime_hwparams(substream, &snd_imx_hardware); + + return 0; +} + +static int snd_imx_close(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct imx_pcm_runtime_data *iprtd = runtime->private_data; + + kfree(iprtd); + return 0; } static struct snd_pcm_ops imx_pcm_ops = { .open = snd_imx_open, + .close = snd_imx_close, .ioctl = snd_pcm_lib_ioctl, .hw_params = snd_imx_pcm_hw_params, .hw_free = snd_imx_pcm_hw_free, @@ -340,7 +317,6 @@ static struct platform_driver imx_pcm_driver = { .name = "imx-pcm-audio", .owner = THIS_MODULE, }, - .probe = imx_soc_platform_probe, .remove = __devexit_p(imx_soc_platform_remove), }; @@ -356,4 +332,3 @@ static void __exit snd_imx_pcm_exit(void) platform_driver_unregister(&imx_pcm_driver); } module_exit(snd_imx_pcm_exit); - diff --git a/sound/soc/imx/imx-ssi.c b/sound/soc/imx/imx-ssi.c index d4bd345b0a8d..d2d98c75ee8a 100644 --- a/sound/soc/imx/imx-ssi.c +++ b/sound/soc/imx/imx-ssi.c @@ -439,7 +439,22 @@ void imx_pcm_free(struct snd_pcm *pcm) } EXPORT_SYMBOL_GPL(imx_pcm_free); +static int imx_ssi_dai_probe(struct snd_soc_dai *dai) +{ + struct imx_ssi *ssi = dev_get_drvdata(dai->dev); + uint32_t val; + + snd_soc_dai_set_drvdata(dai, ssi); + + val = SSI_SFCSR_TFWM0(ssi->dma_params_tx.burstsize) | + SSI_SFCSR_RFWM0(ssi->dma_params_rx.burstsize); + writel(val, ssi->base + SSI_SFCSR); + + return 0; +} + static struct snd_soc_dai_driver imx_ssi_dai = { + .probe = imx_ssi_dai_probe, .playback = { .channels_min = 2, .channels_max = 2, @@ -455,20 +470,6 @@ static struct snd_soc_dai_driver imx_ssi_dai = { .ops = &imx_ssi_pcm_dai_ops, }; -static int imx_ssi_dai_probe(struct snd_soc_dai *dai) -{ - struct imx_ssi *ssi = dev_get_drvdata(dai->dev); - uint32_t val; - - snd_soc_dai_set_drvdata(dai, ssi); - - val = SSI_SFCSR_TFWM0(ssi->dma_params_tx.burstsize) | - SSI_SFCSR_RFWM0(ssi->dma_params_rx.burstsize); - writel(val, ssi->base + SSI_SFCSR); - - return 0; -} - static struct snd_soc_dai_driver imx_ac97_dai = { .probe = imx_ssi_dai_probe, .ac97_control = 1, @@ -677,7 +678,17 @@ static int imx_ssi_probe(struct platform_device *pdev) goto failed_register; } - ssi->soc_platform_pdev = platform_device_alloc("imx-fiq-pcm-audio", pdev->id); + ssi->soc_platform_pdev_fiq = platform_device_alloc("imx-fiq-pcm-audio", pdev->id); + if (!ssi->soc_platform_pdev_fiq) + goto failed_pdev_fiq_alloc; + platform_set_drvdata(ssi->soc_platform_pdev_fiq, ssi); + ret = platform_device_add(ssi->soc_platform_pdev_fiq); + if (ret) { + dev_err(&pdev->dev, "failed to add platform device\n"); + goto failed_pdev_fiq_add; + } + + ssi->soc_platform_pdev = platform_device_alloc("imx-pcm-audio", pdev->id); if (!ssi->soc_platform_pdev) goto failed_pdev_alloc; platform_set_drvdata(ssi->soc_platform_pdev, ssi); @@ -692,6 +703,9 @@ static int imx_ssi_probe(struct platform_device *pdev) failed_pdev_add: platform_device_put(ssi->soc_platform_pdev); failed_pdev_alloc: +failed_pdev_fiq_add: + platform_device_put(ssi->soc_platform_pdev_fiq); +failed_pdev_fiq_alloc: snd_soc_unregister_dai(&pdev->dev); failed_register: failed_ac97: diff --git a/sound/soc/imx/imx-ssi.h b/sound/soc/imx/imx-ssi.h index 53b780d9b2b0..a4406a134892 100644 --- a/sound/soc/imx/imx-ssi.h +++ b/sound/soc/imx/imx-ssi.h @@ -185,6 +185,9 @@ #define DRV_NAME "imx-ssi" +#include <linux/dmaengine.h> +#include <mach/dma.h> + struct imx_pcm_dma_params { int dma; unsigned long dma_addr; @@ -212,6 +215,7 @@ struct imx_ssi { int enabled; struct platform_device *soc_platform_pdev; + struct platform_device *soc_platform_pdev_fiq; }; struct snd_soc_platform *imx_ssi_fiq_init(struct platform_device *pdev, diff --git a/sound/soc/imx/phycore-ac97.c b/sound/soc/imx/phycore-ac97.c index 6a65dd705519..39f23734781a 100644 --- a/sound/soc/imx/phycore-ac97.c +++ b/sound/soc/imx/phycore-ac97.c @@ -20,9 +20,6 @@ #include <sound/soc-dapm.h> #include <asm/mach-types.h> -#include "../codecs/wm9712.h" -#include "imx-ssi.h" - static struct snd_soc_card imx_phycore; static struct snd_soc_ops imx_phycore_hifi_ops = { @@ -41,7 +38,7 @@ static struct snd_soc_dai_link imx_phycore_dai_ac97[] = { }; static struct snd_soc_card imx_phycore = { - .name = "PhyCORE-audio", + .name = "PhyCORE-ac97-audio", .dai_link = imx_phycore_dai_ac97, .num_links = ARRAY_SIZE(imx_phycore_dai_ac97), }; diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index d211c9fa5a91..7e84f24b9a88 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -644,15 +644,23 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai, case OMAP_MCBSP_CLKR_SRC_CLKR: + if (cpu_class_is_omap1()) + break; omap2_mcbsp1_mux_clkr_src(CLKR_SRC_CLKR); break; case OMAP_MCBSP_CLKR_SRC_CLKX: + if (cpu_class_is_omap1()) + break; omap2_mcbsp1_mux_clkr_src(CLKR_SRC_CLKX); break; case OMAP_MCBSP_FSR_SRC_FSR: + if (cpu_class_is_omap1()) + break; omap2_mcbsp1_mux_fsr_src(FSR_SRC_FSR); break; case OMAP_MCBSP_FSR_SRC_FSX: + if (cpu_class_is_omap1()) + break; omap2_mcbsp1_mux_fsr_src(FSR_SRC_FSX); break; default: diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c index 97e9423615c9..f451acd4935b 100644 --- a/sound/soc/pxa/corgi.c +++ b/sound/soc/pxa/corgi.c @@ -100,8 +100,13 @@ static int corgi_startup(struct snd_pcm_substream *substream) struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_codec *codec = rtd->codec; + mutex_lock(&codec->mutex); + /* check the jack status at stream startup */ corgi_ext_control(codec); + + mutex_unlock(&codec->mutex); + return 0; } diff --git a/sound/soc/pxa/magician.c b/sound/soc/pxa/magician.c index b8207ced4072..5ef0526924b9 100644 --- a/sound/soc/pxa/magician.c +++ b/sound/soc/pxa/magician.c @@ -72,9 +72,13 @@ static int magician_startup(struct snd_pcm_substream *substream) struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_codec *codec = rtd->codec; + mutex_lock(&codec->mutex); + /* check the jack status at stream startup */ magician_ext_control(codec); + mutex_unlock(&codec->mutex); + return 0; } diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c index af84ee9c5e11..84edd0385a21 100644 --- a/sound/soc/pxa/poodle.c +++ b/sound/soc/pxa/poodle.c @@ -77,8 +77,13 @@ static int poodle_startup(struct snd_pcm_substream *substream) struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_codec *codec = rtd->codec; + mutex_lock(&codec->mutex); + /* check the jack status at stream startup */ poodle_ext_control(codec); + + mutex_unlock(&codec->mutex); + return 0; } diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c index f470f360f4dd..0b30d7de24ec 100644 --- a/sound/soc/pxa/spitz.c +++ b/sound/soc/pxa/spitz.c @@ -108,8 +108,13 @@ static int spitz_startup(struct snd_pcm_substream *substream) struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_codec *codec = rtd->codec; + mutex_lock(&codec->mutex); + /* check the jack status at stream startup */ spitz_ext_control(codec); + + mutex_unlock(&codec->mutex); + return 0; } diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c index 73d0edd8ded9..7b983f935454 100644 --- a/sound/soc/pxa/tosa.c +++ b/sound/soc/pxa/tosa.c @@ -81,8 +81,13 @@ static int tosa_startup(struct snd_pcm_substream *substream) struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_codec *codec = rtd->codec; + mutex_lock(&codec->mutex); + /* check the jack status at stream startup */ tosa_ext_control(codec); + + mutex_unlock(&codec->mutex); + return 0; } diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig index 8a6b53ccd203..d85bf8a0abb2 100644 --- a/sound/soc/s3c24xx/Kconfig +++ b/sound/soc/s3c24xx/Kconfig @@ -2,6 +2,7 @@ config SND_S3C24XX_SOC tristate "SoC Audio for the Samsung S3CXXXX chips" depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 select S3C64XX_DMA if ARCH_S3C64XX + select S3C2410_DMA if ARCH_S3C2410 help Say Y or M if you want to add support for codecs attached to the S3C24XX AC97 or I2S interfaces. You will also need to diff --git a/sound/soc/s3c24xx/rx1950_uda1380.c b/sound/soc/s3c24xx/rx1950_uda1380.c index ffd5cf2fb0a9..468cc11fdf47 100644 --- a/sound/soc/s3c24xx/rx1950_uda1380.c +++ b/sound/soc/s3c24xx/rx1950_uda1380.c @@ -50,7 +50,6 @@ static unsigned int rates[] = { 16000, 44100, 48000, - 88200, }; static struct snd_pcm_hw_constraint_list hw_rates = { @@ -130,7 +129,6 @@ static const struct snd_soc_dapm_route audio_map[] = { }; static struct platform_device *s3c24xx_snd_device; -static struct clk *xtal; static int rx1950_startup(struct snd_pcm_substream *substream) { @@ -179,10 +177,8 @@ static int rx1950_hw_params(struct snd_pcm_substream *substream, case 44100: case 88200: clk_source = S3C24XX_CLKSRC_MPLL; - fs_mode = S3C2410_IISMOD_256FS; - div = clk_get_rate(xtal) / (256 * rate); - if (clk_get_rate(xtal) % (256 * rate) > (128 * rate)) - div++; + fs_mode = S3C2410_IISMOD_384FS; + div = 1; break; default: printk(KERN_ERR "%s: rate %d is not supported\n", @@ -210,7 +206,7 @@ static int rx1950_hw_params(struct snd_pcm_substream *substream, /* set MCLK division for sample rate */ ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK, - S3C2410_IISMOD_384FS); + fs_mode); if (ret < 0) return ret; @@ -295,17 +291,8 @@ static int __init rx1950_init(void) goto err_plat_add; } - xtal = clk_get(&s3c24xx_snd_device->dev, "xtal"); - - if (IS_ERR(xtal)) { - ret = PTR_ERR(xtal); - platform_device_unregister(s3c24xx_snd_device); - goto err_clk; - } - return 0; -err_clk: err_plat_add: err_plat_alloc: err_gpio_conf: @@ -320,7 +307,6 @@ static void __exit rx1950_exit(void) platform_device_unregister(s3c24xx_snd_device); snd_soc_jack_free_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios), hp_jack_gpios); - clk_put(xtal); gpio_free(S3C2410_GPA(1)); } diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 614a8b30d87b..441285ade024 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -3043,8 +3043,10 @@ int snd_soc_register_dais(struct device *dev, for (i = 0; i < count; i++) { dai = kzalloc(sizeof(struct snd_soc_dai), GFP_KERNEL); - if (dai == NULL) - return -ENOMEM; + if (dai == NULL) { + ret = -ENOMEM; + goto err; + } /* create DAI component name */ dai->name = fmt_multiple_name(dev, &dai_drv[i]); @@ -3263,9 +3265,6 @@ int snd_soc_register_codec(struct device *dev, return 0; error: - for (i--; i >= 0; i--) - snd_soc_unregister_dai(dev); - if (codec->reg_cache) kfree(codec->reg_cache); kfree(codec->name); diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 7d85c6496afa..75ed6491222d 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -683,12 +683,12 @@ static int dapm_seq_compare(struct snd_soc_dapm_widget *a, struct snd_soc_dapm_widget *b, int sort[]) { - if (a->codec != b->codec) - return (unsigned long)a - (unsigned long)b; if (sort[a->id] != sort[b->id]) return sort[a->id] - sort[b->id]; if (a->reg != b->reg) return a->reg - b->reg; + if (a->codec != b->codec) + return (unsigned long)a->codec - (unsigned long)b->codec; return 0; } diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c index 1bc56b2b94e2..337a00241a1f 100644 --- a/sound/spi/at73c213.c +++ b/sound/spi/at73c213.c @@ -155,7 +155,7 @@ static int snd_at73c213_set_bitrate(struct snd_at73c213 *chip) if (max_tries < 1) max_tries = 1; - /* ssc_div must be a power of 2. */ + /* ssc_div must be even. */ ssc_div = (ssc_div + 1) & ~1UL; if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN) { |