diff options
| -rw-r--r-- | drivers/crypto/hifn_795x.c | 110 |
1 files changed, 108 insertions, 2 deletions
diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c index bf817d4ecae2..de594bc97742 100644 --- a/drivers/crypto/hifn_795x.c +++ b/drivers/crypto/hifn_795x.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/mod_devicetable.h> #include <linux/interrupt.h> #include <linux/pci.h> @@ -47,6 +48,11 @@ #define dprintk(f, a...) do {} while (0) #endif +static char hifn_pll_ref[sizeof("extNNN")] = "ext"; +module_param_string(hifn_pll_ref, hifn_pll_ref, sizeof(hifn_pll_ref), 0444); +MODULE_PARM_DESC(hifn_pll_ref, + "PLL reference clock (pci[freq] or ext[freq], default ext)"); + static atomic_t hifn_dev_number; #define ACRYPTO_OP_DECRYPT 0 @@ -286,7 +292,26 @@ static atomic_t hifn_dev_number; #define HIFN_DMACNFG_DMARESET 0x00000002 /* DMA Reset # */ #define HIFN_DMACNFG_MSTRESET 0x00000001 /* Master Reset # */ -#define HIFN_PLL_7956 0x00001d18 /* 7956 PLL config value */ +/* PLL configuration register */ +#define HIFN_PLL_REF_CLK_HBI 0x00000000 /* HBI reference clock */ +#define HIFN_PLL_REF_CLK_PLL 0x00000001 /* PLL reference clock */ +#define HIFN_PLL_BP 0x00000002 /* Reference clock bypass */ +#define HIFN_PLL_PK_CLK_HBI 0x00000000 /* PK engine HBI clock */ +#define HIFN_PLL_PK_CLK_PLL 0x00000008 /* PK engine PLL clock */ +#define HIFN_PLL_PE_CLK_HBI 0x00000000 /* PE engine HBI clock */ +#define HIFN_PLL_PE_CLK_PLL 0x00000010 /* PE engine PLL clock */ +#define HIFN_PLL_RESERVED_1 0x00000400 /* Reserved bit, must be 1 */ +#define HIFN_PLL_ND_SHIFT 11 /* Clock multiplier shift */ +#define HIFN_PLL_ND_MULT_2 0x00000000 /* PLL clock multiplier 2 */ +#define HIFN_PLL_ND_MULT_4 0x00000800 /* PLL clock multiplier 4 */ +#define HIFN_PLL_ND_MULT_6 0x00001000 /* PLL clock multiplier 6 */ +#define HIFN_PLL_ND_MULT_8 0x00001800 /* PLL clock multiplier 8 */ +#define HIFN_PLL_ND_MULT_10 0x00002000 /* PLL clock multiplier 10 */ +#define HIFN_PLL_ND_MULT_12 0x00002800 /* PLL clock multiplier 12 */ +#define HIFN_PLL_IS_1_8 0x00000000 /* charge pump (mult. 1-8) */ +#define HIFN_PLL_IS_9_12 0x00010000 /* charge pump (mult. 9-12) */ + +#define HIFN_PLL_FCK_MAX 266 /* Maximum PLL frequency */ /* Public key reset register (HIFN_1_PUB_RESET) */ #define HIFN_PUBRST_RESET 0x00000001 /* reset public/rng unit */ @@ -871,6 +896,64 @@ static void hifn_init_dma(struct hifn_device *dev) dma->cmdk = dma->srck = dma->dstk = dma->resk = 0; } +/* + * Initialize the PLL. We need to know the frequency of the reference clock + * to calculate the optimal multiplier. For PCI we assume 66MHz, since that + * allows us to operate without the risk of overclocking the chip. If it + * actually uses 33MHz, the chip will operate at half the speed, this can be + * overriden by specifying the frequency as module parameter (pci33). + * + * Unfortunately the PCI clock is not very suitable since the HIFN needs a + * stable clock and the PCI clock frequency may vary, so the default is the + * external clock. There is no way to find out its frequency, we default to + * 66MHz since according to Mike Ham of HiFn, almost every board in existence + * has an external crystal populated at 66MHz. + */ +static void hifn_init_pll(struct hifn_device *dev) +{ + unsigned int freq, m; + u32 pllcfg; + + pllcfg = HIFN_1_PLL | HIFN_PLL_RESERVED_1; + + if (strncmp(hifn_pll_ref, "ext", 3) == 0) + pllcfg |= HIFN_PLL_REF_CLK_PLL; + else + pllcfg |= HIFN_PLL_REF_CLK_HBI; + + if (hifn_pll_ref[3] != '\0') + freq = simple_strtoul(hifn_pll_ref + 3, NULL, 10); + else { + freq = 66; + printk(KERN_INFO "hifn795x: assuming %uMHz clock speed, " + "override with hifn_pll_ref=%.3s<frequency>\n", + freq, hifn_pll_ref); + } + + m = HIFN_PLL_FCK_MAX / freq; + + pllcfg |= (m / 2 - 1) << HIFN_PLL_ND_SHIFT; + if (m <= 8) + pllcfg |= HIFN_PLL_IS_1_8; + else + pllcfg |= HIFN_PLL_IS_9_12; + + /* Select clock source and enable clock bypass */ + hifn_write_1(dev, HIFN_1_PLL, pllcfg | + HIFN_PLL_PK_CLK_HBI | HIFN_PLL_PE_CLK_HBI | HIFN_PLL_BP); + + /* Let the chip lock to the input clock */ + mdelay(10); + + /* Disable clock bypass */ + hifn_write_1(dev, HIFN_1_PLL, pllcfg | + HIFN_PLL_PK_CLK_HBI | HIFN_PLL_PE_CLK_HBI); + + /* Switch the engines to the PLL */ + hifn_write_1(dev, HIFN_1_PLL, pllcfg | + HIFN_PLL_PK_CLK_PLL | HIFN_PLL_PE_CLK_PLL); +} + static void hifn_init_registers(struct hifn_device *dev) { u32 dptr = dev->desc_dma; @@ -938,7 +1021,7 @@ static void hifn_init_registers(struct hifn_device *dev) #else hifn_write_0(dev, HIFN_0_PUCNFG, 0x10342); #endif - hifn_write_1(dev, HIFN_1_PLL, HIFN_PLL_7956); + hifn_init_pll(dev); hifn_write_0(dev, HIFN_0_PUISR, HIFN_PUISR_DSTOVER); hifn_write_1(dev, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | @@ -2621,8 +2704,31 @@ static struct pci_driver hifn_pci_driver = { static int __devinit hifn_init(void) { + unsigned int freq; int err; + if (strncmp(hifn_pll_ref, "ext", 3) && + strncmp(hifn_pll_ref, "pci", 3)) { + printk(KERN_ERR "hifn795x: invalid hifn_pll_ref clock, " + "must be pci or ext"); + return -EINVAL; + } + + /* + * For the 7955/7956 the reference clock frequency must be in the + * range of 20MHz-100MHz. For the 7954 the upper bound is 66.67MHz, + * but this chip is currently not supported. + */ + if (hifn_pll_ref[3] != '\0') { + freq = simple_strtoul(hifn_pll_ref + 3, NULL, 10); + if (freq < 20 || freq > 100) { + printk(KERN_ERR "hifn795x: invalid hifn_pll_ref " + "frequency, must be in the range " + "of 20-100"); + return -EINVAL; + } + } + err = pci_register_driver(&hifn_pci_driver); if (err < 0) { dprintk("Failed to register PCI driver for %s device.\n", |