diff options
| -rw-r--r-- | arch/mips/include/asm/gic.h | 35 | ||||
| -rw-r--r-- | arch/mips/include/asm/mips-boards/maltaint.h | 14 | ||||
| -rw-r--r-- | arch/mips/include/asm/mips-boards/sead3int.h | 13 | ||||
| -rw-r--r-- | arch/mips/kernel/cevt-gic.c | 3 | ||||
| -rw-r--r-- | arch/mips/mti-malta/malta-int.c | 189 | ||||
| -rw-r--r-- | arch/mips/mti-sead3/sead3-ehci.c | 8 | ||||
| -rw-r--r-- | arch/mips/mti-sead3/sead3-int.c | 28 | ||||
| -rw-r--r-- | arch/mips/mti-sead3/sead3-net.c | 14 | ||||
| -rw-r--r-- | arch/mips/mti-sead3/sead3-platform.c | 18 | ||||
| -rw-r--r-- | drivers/irqchip/irq-mips-gic.c | 201 |
10 files changed, 198 insertions, 325 deletions
diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h index efcf4dec1229..cfbf907ebfa5 100644 --- a/arch/mips/include/asm/gic.h +++ b/arch/mips/include/asm/gic.h @@ -316,31 +316,6 @@ GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe)), \ GIC_SH_MAP_TO_VPE_REG_BIT(vpe)) -/* - * Interrupt Meta-data specification. The ipiflag helps - * in building ipi_map. - */ -struct gic_intr_map { - unsigned int cpunum; /* Directed to this CPU */ -#define GIC_UNUSED 0xdead /* Dummy data */ - unsigned int pin; /* Directed to this Pin */ - unsigned int polarity; /* Polarity : +/- */ - unsigned int trigtype; /* Trigger : Edge/Levl */ - unsigned int flags; /* Misc flags */ -#define GIC_FLAG_TRANSPARENT 0x01 -}; - -/* - * This is only used in EIC mode. This helps to figure out which - * shared interrupts we need to process when we get a vector interrupt. - */ -#define GIC_MAX_SHARED_INTR 0x5 -struct gic_shared_intr_map { - unsigned int num_shared_intr; - unsigned int intr_list[GIC_MAX_SHARED_INTR]; - unsigned int local_intr_mask; -}; - /* GIC nomenclature for Core Interrupt Pins. */ #define GIC_CPU_INT0 0 /* Core Interrupt 2 */ #define GIC_CPU_INT1 1 /* . */ @@ -349,6 +324,9 @@ struct gic_shared_intr_map { #define GIC_CPU_INT4 4 /* . */ #define GIC_CPU_INT5 5 /* Core Interrupt 7 */ +/* Add 2 to convert GIC CPU pin to core interrupt */ +#define GIC_CPU_PIN_OFFSET 2 + /* Local GIC interrupts. */ #define GIC_INT_TMR (GIC_CPU_INT5) #define GIC_INT_PERFCTR (GIC_CPU_INT5) @@ -365,13 +343,12 @@ struct gic_shared_intr_map { extern unsigned int gic_present; extern unsigned int gic_frequency; extern unsigned long _gic_base; -extern unsigned int gic_irq_base; extern unsigned int gic_irq_flags[]; -extern struct gic_shared_intr_map gic_shared_intr_map[]; +extern unsigned int gic_cpu_pin; extern void gic_init(unsigned long gic_base_addr, - unsigned long gic_addrspace_size, struct gic_intr_map *intrmap, - unsigned int intrmap_size, unsigned int irqbase); + unsigned long gic_addrspace_size, unsigned int cpu_vec, + unsigned int irqbase); extern void gic_clocksource_init(unsigned int); extern unsigned int gic_compare_int (void); extern cycle_t gic_read_count(void); diff --git a/arch/mips/include/asm/mips-boards/maltaint.h b/arch/mips/include/asm/mips-boards/maltaint.h index d741628e3397..bdd6f392f160 100644 --- a/arch/mips/include/asm/mips-boards/maltaint.h +++ b/arch/mips/include/asm/mips-boards/maltaint.h @@ -20,11 +20,10 @@ #define MIPSCPU_INT_SW1 1 #define MIPSCPU_INT_MB0 2 #define MIPSCPU_INT_I8259A MIPSCPU_INT_MB0 +#define MIPSCPU_INT_GIC MIPSCPU_INT_MB0 /* GIC chained interrupt */ #define MIPSCPU_INT_MB1 3 #define MIPSCPU_INT_SMI MIPSCPU_INT_MB1 -#define MIPSCPU_INT_IPI0 MIPSCPU_INT_MB1 /* GIC IPI */ #define MIPSCPU_INT_MB2 4 -#define MIPSCPU_INT_IPI1 MIPSCPU_INT_MB2 /* GIC IPI */ #define MIPSCPU_INT_MB3 5 #define MIPSCPU_INT_COREHI MIPSCPU_INT_MB3 #define MIPSCPU_INT_MB4 6 @@ -61,14 +60,7 @@ #define MSC01E_INT_PERFCTR 10 #define MSC01E_INT_CPUCTR 11 -/* External Interrupts used for IPI */ -#define GIC_IPI_EXT_INTR_RESCHED_VPE0 16 -#define GIC_IPI_EXT_INTR_CALLFNC_VPE0 17 -#define GIC_IPI_EXT_INTR_RESCHED_VPE1 18 -#define GIC_IPI_EXT_INTR_CALLFNC_VPE1 19 -#define GIC_IPI_EXT_INTR_RESCHED_VPE2 20 -#define GIC_IPI_EXT_INTR_CALLFNC_VPE2 21 -#define GIC_IPI_EXT_INTR_RESCHED_VPE3 22 -#define GIC_IPI_EXT_INTR_CALLFNC_VPE3 23 +/* GIC external interrupts */ +#define GIC_INT_I8259A 3 #endif /* !(_MIPS_MALTAINT_H) */ diff --git a/arch/mips/include/asm/mips-boards/sead3int.h b/arch/mips/include/asm/mips-boards/sead3int.h index 11ebec94f807..a2e0095440fe 100644 --- a/arch/mips/include/asm/mips-boards/sead3int.h +++ b/arch/mips/include/asm/mips-boards/sead3int.h @@ -14,4 +14,17 @@ #define GIC_BASE_ADDR 0x1b1c0000 #define GIC_ADDRSPACE_SZ (128 * 1024) +/* CPU interrupt offsets */ +#define CPU_INT_GIC 2 +#define CPU_INT_EHCI 2 +#define CPU_INT_UART0 4 +#define CPU_INT_UART1 4 +#define CPU_INT_NET 6 + +/* GIC interrupt offsets */ +#define GIC_INT_NET 0 +#define GIC_INT_UART1 2 +#define GIC_INT_UART0 3 +#define GIC_INT_EHCI 5 + #endif /* !(_MIPS_SEAD3INT_H) */ diff --git a/arch/mips/kernel/cevt-gic.c b/arch/mips/kernel/cevt-gic.c index 6093716980b9..a90bd4c81c7d 100644 --- a/arch/mips/kernel/cevt-gic.c +++ b/arch/mips/kernel/cevt-gic.c @@ -91,7 +91,8 @@ int gic_clockevent_init(void) clockevents_register_device(cd); - GICWRITE(GIC_REG(VPE_LOCAL, GIC_VPE_COMPARE_MAP), 0x80000002); + GICWRITE(GIC_REG(VPE_LOCAL, GIC_VPE_COMPARE_MAP), + GIC_MAP_TO_PIN_MSK | gic_cpu_pin); GICWRITE(GIC_REG(VPE_LOCAL, GIC_VPE_SMASK), GIC_VPE_SMASK_CMP_MSK); if (gic_timer_irq_installed) diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index e56563c6f89e..3b3bc1d9ebf9 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -38,14 +38,9 @@ #include <asm/rtlx.h> static unsigned long _msc01_biu_base; -static unsigned int ipi_map[NR_CPUS]; static DEFINE_RAW_SPINLOCK(mips_irq_lock); -#ifdef CONFIG_MIPS_GIC_IPI -DECLARE_BITMAP(ipi_ints, GIC_NUM_INTRS); -#endif - static inline int mips_pcibios_iack(void) { int irq; @@ -127,24 +122,10 @@ static void malta_hw0_irqdispatch(void) #endif } -static void malta_ipi_irqdispatch(void) +static irqreturn_t i8259_handler(int irq, void *dev_id) { -#ifdef CONFIG_MIPS_GIC_IPI - unsigned long irq; - DECLARE_BITMAP(pending, GIC_NUM_INTRS); - - gic_get_int_mask(pending, ipi_ints); - - irq = find_first_bit(pending, GIC_NUM_INTRS); - - while (irq < GIC_NUM_INTRS) { - do_IRQ(MIPS_GIC_IRQ_BASE + irq); - - irq = find_next_bit(pending, GIC_NUM_INTRS, irq + 1); - } -#endif - if (gic_compare_int()) - do_IRQ(MIPS_GIC_IRQ_BASE); + malta_hw0_irqdispatch(); + return IRQ_HANDLED; } static void corehi_irqdispatch(void) @@ -203,6 +184,12 @@ static void corehi_irqdispatch(void) die("CoreHi interrupt", regs); } +static irqreturn_t corehi_handler(int irq, void *dev_id) +{ + corehi_irqdispatch(); + return IRQ_HANDLED; +} + static inline int clz(unsigned long x) { __asm__( @@ -286,10 +273,9 @@ asmlinkage void plat_irq_dispatch(void) irq = irq_ffs(pending); - if (irq == MIPSCPU_INT_I8259A) - malta_hw0_irqdispatch(); - else if (gic_present && ((1 << irq) & ipi_map[smp_processor_id()])) - malta_ipi_irqdispatch(); + /* HACK: GIC doesn't properly dispatch local interrupts yet */ + if (gic_present && irq == MIPSCPU_INT_GIC && gic_compare_int()) + do_IRQ(MIPS_GIC_IRQ_BASE); else do_IRQ(MIPS_CPU_IRQ_BASE + irq); } @@ -312,13 +298,6 @@ static void ipi_call_dispatch(void) do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ); } -#endif /* CONFIG_MIPS_MT_SMP */ - -#ifdef CONFIG_MIPS_GIC_IPI - -#define GIC_MIPS_CPU_IPI_RESCHED_IRQ 3 -#define GIC_MIPS_CPU_IPI_CALL_IRQ 4 - static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id) { #ifdef CONFIG_MIPS_VPE_APSP_API_CMP @@ -349,31 +328,16 @@ static struct irqaction irq_call = { .flags = IRQF_PERCPU, .name = "IPI_call" }; -#endif /* CONFIG_MIPS_GIC_IPI */ - -static int gic_resched_int_base; -static int gic_call_int_base; -#define GIC_RESCHED_INT(cpu) (gic_resched_int_base+(cpu)) -#define GIC_CALL_INT(cpu) (gic_call_int_base+(cpu)) - -unsigned int plat_ipi_call_int_xlate(unsigned int cpu) -{ - return GIC_CALL_INT(cpu); -} - -unsigned int plat_ipi_resched_int_xlate(unsigned int cpu) -{ - return GIC_RESCHED_INT(cpu); -} +#endif /* CONFIG_MIPS_MT_SMP */ static struct irqaction i8259irq = { - .handler = no_action, + .handler = i8259_handler, .name = "XT-PIC cascade", .flags = IRQF_NO_THREAD, }; static struct irqaction corehi_irqaction = { - .handler = no_action, + .handler = corehi_handler, .name = "CoreHi", .flags = IRQF_NO_THREAD, }; @@ -399,60 +363,6 @@ static msc_irqmap_t msc_eicirqmap[] __initdata = { static int msc_nr_eicirqs __initdata = ARRAY_SIZE(msc_eicirqmap); -/* - * This GIC specific tabular array defines the association between External - * Interrupts and CPUs/Core Interrupts. The nature of the External - * Interrupts is also defined here - polarity/trigger. - */ - -#define GIC_CPU_NMI GIC_MAP_TO_NMI_MSK -#define X GIC_UNUSED - -static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = { - { X, X, X, X, 0 }, - { X, X, X, X, 0 }, - { X, X, X, X, 0 }, - { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, - { 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, - { 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, - { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, - { 0, GIC_CPU_INT4, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, - { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, - { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, - { X, X, X, X, 0 }, - { X, X, X, X, 0 }, - { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, - { 0, GIC_CPU_NMI, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, - { 0, GIC_CPU_NMI, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, - { X, X, X, X, 0 }, - /* The remainder of this table is initialised by fill_ipi_map */ -}; -#undef X - -#ifdef CONFIG_MIPS_GIC_IPI -static void __init fill_ipi_map1(int baseintr, int cpu, int cpupin) -{ - int intr = baseintr + cpu; - gic_intr_map[intr].cpunum = cpu; - gic_intr_map[intr].pin = cpupin; - gic_intr_map[intr].polarity = GIC_POL_POS; - gic_intr_map[intr].trigtype = GIC_TRIG_EDGE; - gic_intr_map[intr].flags = 0; - ipi_map[cpu] |= (1 << (cpupin + 2)); - bitmap_set(ipi_ints, intr, 1); -} - -static void __init fill_ipi_map(void) -{ - int cpu; - - for (cpu = 0; cpu < nr_cpu_ids; cpu++) { - fill_ipi_map1(gic_resched_int_base, cpu, GIC_CPU_INT1); - fill_ipi_map1(gic_call_int_base, cpu, GIC_CPU_INT2); - } -} -#endif - void __init arch_init_ipiirq(int irq, struct irqaction *action) { setup_irq(irq, action); @@ -461,6 +371,8 @@ void __init arch_init_ipiirq(int irq, struct irqaction *action) void __init arch_init_irq(void) { + int corehi_irq, i8259_irq; + init_i8259_irqs(); if (!cpu_has_veic) @@ -507,34 +419,11 @@ void __init arch_init_irq(void) msc_nr_irqs); } - if (cpu_has_veic) { - set_vi_handler(MSC01E_INT_I8259A, malta_hw0_irqdispatch); - set_vi_handler(MSC01E_INT_COREHI, corehi_irqdispatch); - setup_irq(MSC01E_INT_BASE+MSC01E_INT_I8259A, &i8259irq); - setup_irq(MSC01E_INT_BASE+MSC01E_INT_COREHI, &corehi_irqaction); - } else if (cpu_has_vint) { - set_vi_handler(MIPSCPU_INT_I8259A, malta_hw0_irqdispatch); - set_vi_handler(MIPSCPU_INT_COREHI, corehi_irqdispatch); - setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq); - setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, - &corehi_irqaction); - } else { - setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq); - setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, - &corehi_irqaction); - } - if (gic_present) { - /* FIXME */ int i; -#if defined(CONFIG_MIPS_GIC_IPI) - gic_call_int_base = GIC_NUM_INTRS - - (NR_CPUS - nr_cpu_ids) * 2 - nr_cpu_ids; - gic_resched_int_base = gic_call_int_base - nr_cpu_ids; - fill_ipi_map(); -#endif - gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, - ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE); + + gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, MIPSCPU_INT_GIC, + MIPS_GIC_IRQ_BASE); if (!mips_cm_present()) { /* Enable the GIC */ i = REG(_msc01_biu_base, MSC01_SC_CFG); @@ -542,28 +431,8 @@ void __init arch_init_irq(void) (i | (0x1 << MSC01_SC_CFG_GICENA_SHF)); pr_debug("GIC Enabled\n"); } -#if defined(CONFIG_MIPS_GIC_IPI) - /* set up ipi interrupts */ - if (cpu_has_vint) { - set_vi_handler(MIPSCPU_INT_IPI0, malta_ipi_irqdispatch); - set_vi_handler(MIPSCPU_INT_IPI1, malta_ipi_irqdispatch); - } - /* Argh.. this really needs sorting out.. */ - pr_info("CPU%d: status register was %08x\n", - smp_processor_id(), read_c0_status()); - write_c0_status(read_c0_status() | STATUSF_IP3 | STATUSF_IP4); - pr_info("CPU%d: status register now %08x\n", - smp_processor_id(), read_c0_status()); - write_c0_status(0x1100dc00); - pr_info("CPU%d: status register frc %08x\n", - smp_processor_id(), read_c0_status()); - for (i = 0; i < nr_cpu_ids; i++) { - arch_init_ipiirq(MIPS_GIC_IRQ_BASE + - GIC_RESCHED_INT(i), &irq_resched); - arch_init_ipiirq(MIPS_GIC_IRQ_BASE + - GIC_CALL_INT(i), &irq_call); - } -#endif + i8259_irq = MIPS_GIC_IRQ_BASE + GIC_INT_I8259A; + corehi_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_COREHI; } else { #if defined(CONFIG_MIPS_MT_SMP) /* set up ipi interrupts */ @@ -587,7 +456,21 @@ void __init arch_init_irq(void) arch_init_ipiirq(cpu_ipi_resched_irq, &irq_resched); arch_init_ipiirq(cpu_ipi_call_irq, &irq_call); #endif + if (cpu_has_veic) { + set_vi_handler(MSC01E_INT_I8259A, + malta_hw0_irqdispatch); + set_vi_handler(MSC01E_INT_COREHI, + corehi_irqdispatch); + i8259_irq = MSC01E_INT_BASE + MSC01E_INT_I8259A; + corehi_irq = MSC01E_INT_BASE + MSC01E_INT_COREHI; + } else { + i8259_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_I8259A; + corehi_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_COREHI; + } } + + setup_irq(i8259_irq, &i8259irq); + setup_irq(corehi_irq, &corehi_irqaction); } void malta_be_init(void) diff --git a/arch/mips/mti-sead3/sead3-ehci.c b/arch/mips/mti-sead3/sead3-ehci.c index 772fc056a92d..4ddaa0fd5804 100644 --- a/arch/mips/mti-sead3/sead3-ehci.c +++ b/arch/mips/mti-sead3/sead3-ehci.c @@ -10,6 +10,9 @@ #include <linux/dma-mapping.h> #include <linux/platform_device.h> +#include <asm/gic.h> +#include <asm/mips-boards/sead3int.h> + struct resource ehci_resources[] = { { .start = 0x1b200000, @@ -17,7 +20,6 @@ struct resource ehci_resources[] = { .flags = IORESOURCE_MEM }, { - .start = MIPS_CPU_IRQ_BASE + 2, .flags = IORESOURCE_IRQ } }; @@ -37,6 +39,10 @@ static struct platform_device ehci_device = { static int __init ehci_init(void) { + if (gic_present) + ehci_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_EHCI; + else + ehci_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_EHCI; return platform_device_register(&ehci_device); } diff --git a/arch/mips/mti-sead3/sead3-int.c b/arch/mips/mti-sead3/sead3-int.c index 8f3634281ed9..cb06cd954a13 100644 --- a/arch/mips/mti-sead3/sead3-int.c +++ b/arch/mips/mti-sead3/sead3-int.c @@ -22,30 +22,6 @@ static unsigned long sead3_config_reg; -/* - * This table defines the setup for each external GIC interrupt. It is - * indexed by interrupt number. - */ -#define GIC_CPU_NMI GIC_MAP_TO_NMI_MSK -static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = { - { 0, GIC_CPU_INT4, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, - { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, - { 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, - { 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, - { 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, - { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, - { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, - { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, - { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, - { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED }, - { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED }, - { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED }, - { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED }, - { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED }, - { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED }, - { GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED, GIC_UNUSED }, -}; - asmlinkage void plat_irq_dispatch(void) { unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; @@ -81,7 +57,7 @@ void __init arch_init_irq(void) (current_cpu_data.options & MIPS_CPU_VEIC) ? "on" : "off"); if (gic_present) - gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, - ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE); + gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, CPU_INT_GIC, + MIPS_GIC_IRQ_BASE); } diff --git a/arch/mips/mti-sead3/sead3-net.c b/arch/mips/mti-sead3/sead3-net.c index dd11e7eb771c..c9f728a41bdb 100644 --- a/arch/mips/mti-sead3/sead3-net.c +++ b/arch/mips/mti-sead3/sead3-net.c @@ -10,6 +10,9 @@ #include <linux/platform_device.h> #include <linux/smsc911x.h> +#include <asm/gic.h> +#include <asm/mips-boards/sead3int.h> + static struct smsc911x_platform_config sead3_smsc911x_data = { .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, @@ -17,14 +20,13 @@ static struct smsc911x_platform_config sead3_smsc911x_data = { .phy_interface = PHY_INTERFACE_MODE_MII, }; -struct resource sead3_net_resourcess[] = { +struct resource sead3_net_resources[] = { { .start = 0x1f010000, .end = 0x1f01ffff, .flags = IORESOURCE_MEM }, { - .start = MIPS_CPU_IRQ_BASE + 6, .flags = IORESOURCE_IRQ } }; @@ -35,12 +37,16 @@ static struct platform_device sead3_net_device = { .dev = { .platform_data = &sead3_smsc911x_data, }, - .num_resources = ARRAY_SIZE(sead3_net_resourcess), - .resource = sead3_net_resourcess + .num_resources = ARRAY_SIZE(sead3_net_resources), + .resource = sead3_net_resources }; static int __init sead3_net_init(void) { + if (gic_present) + sead3_net_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_NET; + else + sead3_net_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_NET; return platform_device_register(&sead3_net_device); } diff --git a/arch/mips/mti-sead3/sead3-platform.c b/arch/mips/mti-sead3/sead3-platform.c index 6c3b33dbed18..d9661eb6fd6d 100644 --- a/arch/mips/mti-sead3/sead3-platform.c +++ b/arch/mips/mti-sead3/sead3-platform.c @@ -9,10 +9,13 @@ #include <linux/init.h> #include <linux/serial_8250.h> -#define UART(base, int) \ +#include <asm/gic.h> +#include <asm/mips-boards/sead3int.h> + +#define UART(base) \ { \ .mapbase = base, \ - .irq = int, \ + .irq = -1, \ .uartclk = 14745600, \ .iotype = UPIO_MEM32, \ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, \ @@ -20,8 +23,8 @@ } static struct plat_serial8250_port uart8250_data[] = { - UART(0x1f000900, MIPS_CPU_IRQ_BASE + 4), /* ttyS0 = USB */ - UART(0x1f000800, MIPS_CPU_IRQ_BASE + 4), /* ttyS1 = RS232 */ + UART(0x1f000900), /* ttyS0 = USB */ + UART(0x1f000800), /* ttyS1 = RS232 */ { }, }; @@ -35,6 +38,13 @@ static struct platform_device uart8250_device = { static int __init uart8250_init(void) { + if (gic_present) { + uart8250_data[0].irq = MIPS_GIC_IRQ_BASE + GIC_INT_UART0; + uart8250_data[1].irq = MIPS_GIC_IRQ_BASE + GIC_INT_UART1; + } else { + uart8250_data[0].irq = MIPS_CPU_IRQ_BASE + CPU_INT_UART0; + uart8250_data[1].irq = MIPS_CPU_IRQ_BASE + CPU_INT_UART1; + } return platform_device_register(&uart8250_device); } diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c index 79ab99781534..633a34639388 100644 --- a/drivers/irqchip/irq-mips-gic.c +++ b/drivers/irqchip/irq-mips-gic.c @@ -8,6 +8,8 @@ */ #include <linux/bitmap.h> #include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/sched.h> #include <linux/smp.h> #include <linux/irq.h> #include <linux/clocksource.h> @@ -22,11 +24,8 @@ unsigned int gic_frequency; unsigned int gic_present; unsigned long _gic_base; -unsigned int gic_irq_base; unsigned int gic_irq_flags[GIC_NUM_INTRS]; - -/* The index into this array is the vector # of the interrupt. */ -struct gic_shared_intr_map gic_shared_intr_map[GIC_NUM_INTRS]; +unsigned int gic_cpu_pin; struct gic_pcpu_mask { DECLARE_BITMAP(pcpu_mask, GIC_NUM_INTRS); @@ -46,6 +45,8 @@ static struct gic_intrmask_regs intrmask_regs[NR_CPUS]; static DEFINE_SPINLOCK(gic_lock); static struct irq_domain *gic_irq_domain; +static void __gic_irq_dispatch(void); + #if defined(CONFIG_CSRC_GIC) || defined(CONFIG_CEVT_GIC) cycle_t gic_read_count(void) { @@ -117,21 +118,6 @@ void gic_send_ipi(unsigned int intr) GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), 0x80000000 | intr); } -static void gic_eic_irq_dispatch(void) -{ - unsigned int cause = read_c0_cause(); - int irq; - - irq = (cause & ST0_IM) >> STATUSB_IP2; - if (irq == 0) - irq = -1; - - if (irq >= 0) - do_IRQ(gic_irq_base + irq); - else - spurious_interrupt(); -} - static void __init vpe_local_setup(unsigned int numvpes) { unsigned long timer_intr = GIC_INT_TMR; @@ -166,16 +152,15 @@ static void __init vpe_local_setup(unsigned int numvpes) GIC_MAP_TO_PIN_MSK | timer_intr); if (cpu_has_veic) { set_vi_handler(timer_intr + GIC_PIN_TO_VEC_OFFSET, - gic_eic_irq_dispatch); - gic_shared_intr_map[timer_intr + GIC_PIN_TO_VEC_OFFSET].local_intr_mask |= GIC_VPE_RMASK_TIMER_MSK; + __gic_irq_dispatch); } if (vpe_ctl & GIC_VPE_CTL_PERFCNT_RTBL_MSK) GICWRITE(GIC_REG(VPE_OTHER, GIC_VPE_PERFCTR_MAP), GIC_MAP_TO_PIN_MSK | perf_intr); if (cpu_has_veic) { - set_vi_handler(perf_intr + GIC_PIN_TO_VEC_OFFSET, gic_eic_irq_dispatch); - gic_shared_intr_map[perf_intr + GIC_PIN_TO_VEC_OFFSET].local_intr_mask |= GIC_VPE_RMASK_PERFCNT_MSK; + set_vi_handler(perf_intr + GIC_PIN_TO_VEC_OFFSET, + __gic_irq_dispatch); } } } @@ -343,64 +328,100 @@ static struct irq_chip gic_irq_controller = { #endif }; -static void __init gic_setup_intr(unsigned int intr, unsigned int cpu, - unsigned int pin, unsigned int polarity, unsigned int trigtype, - unsigned int flags) +static void __gic_irq_dispatch(void) { - struct gic_shared_intr_map *map_ptr; - int i; - - /* Setup Intr to Pin mapping */ - if (pin & GIC_MAP_TO_NMI_MSK) { - int i; + unsigned int intr, virq; - GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_MAP_TO_PIN(intr)), pin); - /* FIXME: hack to route NMI to all cpu's */ - for (i = 0; i < NR_CPUS; i += 32) { - GICWRITE(GIC_REG_ADDR(SHARED, - GIC_SH_MAP_TO_VPE_REG_OFF(intr, i)), - 0xffffffff); - } - } else { - GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_MAP_TO_PIN(intr)), - GIC_MAP_TO_PIN_MSK | pin); - /* Setup Intr to CPU mapping */ - GIC_SH_MAP_TO_VPE_SMASK(intr, cpu); - if (cpu_has_veic) { - set_vi_handler(pin + GIC_PIN_TO_VEC_OFFSET, - gic_eic_irq_dispatch); - map_ptr = &gic_shared_intr_map[pin + GIC_PIN_TO_VEC_OFFSET]; - if (map_ptr->num_shared_intr >= GIC_MAX_SHARED_INTR) - BUG(); - map_ptr->intr_list[map_ptr->num_shared_intr++] = intr; - } + while ((intr = gic_get_int()) != GIC_NUM_INTRS) { + virq = irq_linear_revmap(gic_irq_domain, intr); + do_IRQ(virq); } +} - /* Setup Intr Polarity */ - GIC_SET_POLARITY(intr, polarity); +static void gic_irq_dispatch(unsigned int irq, struct irq_desc *desc) +{ + __gic_irq_dispatch(); +} + +#ifdef CONFIG_MIPS_GIC_IPI +static int gic_resched_int_base; +static int gic_call_int_base; + +unsigned int plat_ipi_resched_int_xlate(unsigned int cpu) +{ + return gic_resched_int_base + cpu; +} - /* Setup Intr Trigger Type */ - GIC_SET_TRIGGER(intr, trigtype); +unsigned int plat_ipi_call_int_xlate(unsigned int cpu) +{ + return gic_call_int_base + cpu; +} - /* Init Intr Masks */ - GIC_CLR_INTR_MASK(intr); +static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id) +{ + scheduler_ipi(); + + return IRQ_HANDLED; +} + +static irqreturn_t ipi_call_interrupt(int irq, void *dev_id) +{ + smp_call_function_interrupt(); + + return IRQ_HANDLED; +} - /* Initialise per-cpu Interrupt software masks */ +static struct irqaction irq_resched = { + .handler = ipi_resched_interrupt, + .flags = IRQF_PERCPU, + .name = "IPI resched" +}; + +static struct irqaction irq_call = { + .handler = ipi_call_interrupt, + .flags = IRQF_PERCPU, + .name = "IPI call" +}; + +static __init void gic_ipi_init_one(unsigned int intr, int cpu, + struct irqaction *action) +{ + int virq = irq_create_mapping(gic_irq_domain, intr); + int i; + + GIC_SH_MAP_TO_VPE_SMASK(intr, cpu); for (i = 0; i < NR_CPUS; i++) clear_bit(intr, pcpu_masks[i].pcpu_mask); set_bit(intr, pcpu_masks[cpu].pcpu_mask); - if ((flags & GIC_FLAG_TRANSPARENT) && (cpu_has_veic == 0)) - GIC_SET_INTR_MASK(intr); - if (trigtype == GIC_TRIG_EDGE) - gic_irq_flags[intr] |= GIC_TRIG_EDGE; + irq_set_irq_type(virq, IRQ_TYPE_EDGE_RISING); + + irq_set_handler(virq, handle_percpu_irq); + setup_irq(virq, action); } -static void __init gic_basic_init(int numintrs, int numvpes, - struct gic_intr_map *intrmap, int mapsize) +static __init void gic_ipi_init(void) { - unsigned int i, cpu; - unsigned int pin_offset = 0; + int i; + + /* Use last 2 * NR_CPUS interrupts as IPIs */ + gic_resched_int_base = GIC_NUM_INTRS - nr_cpu_ids; + gic_call_int_base = gic_resched_int_base - nr_cpu_ids; + + for (i = 0; i < nr_cpu_ids; i++) { + gic_ipi_init_one(gic_call_int_base + i, i, &irq_call); + gic_ipi_init_one(gic_resched_int_base + i, i, &irq_resched); + } +} +#else +static inline void gic_ipi_init(void) +{ +} +#endif + +static void __init gic_basic_init(int numintrs, int numvpes) +{ + unsigned int i; board_bind_eic_interrupt = &gic_bind_eic_interrupt; @@ -409,31 +430,8 @@ static void __init gic_basic_init(int numintrs, int numvpes, GIC_SET_POLARITY(i, GIC_POL_POS); GIC_SET_TRIGGER(i, GIC_TRIG_LEVEL); GIC_CLR_INTR_MASK(i); - if (i < GIC_NUM_INTRS) { + if (i < GIC_NUM_INTRS) gic_irq_flags[i] = 0; - gic_shared_intr_map[i].num_shared_intr = 0; - gic_shared_intr_map[i].local_intr_mask = 0; - } - } - - /* - * In EIC mode, the HW_INT# is offset by (2-1). Need to subtract - * one because the GIC will add one (since 0=no intr). - */ - if (cpu_has_veic) - pin_offset = (GIC_CPU_TO_VEC_OFFSET - GIC_PIN_TO_VEC_OFFSET); - - /* Setup specifics */ - for (i = 0; i < mapsize; i++) { - cpu = intrmap[i].cpunum; - if (cpu == GIC_UNUSED) - continue; - gic_setup_intr(i, - intrmap[i].cpunum, - intrmap[i].pin + pin_offset, - intrmap[i].polarity, - intrmap[i].trigtype, - intrmap[i].flags); } vpe_local_setup(numvpes); @@ -448,7 +446,7 @@ static int gic_irq_domain_map(struct irq_domain *d, unsigned int virq, spin_lock_irqsave(&gic_lock, flags); GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_MAP_TO_PIN(hw)), - GIC_MAP_TO_PIN_MSK | 0); + GIC_MAP_TO_PIN_MSK | gic_cpu_pin); /* Map to VPE 0 by default */ GIC_SH_MAP_TO_VPE_SMASK(hw, 0); set_bit(hw, pcpu_masks[0].pcpu_mask); @@ -463,8 +461,7 @@ static struct irq_domain_ops gic_irq_domain_ops = { }; void __init gic_init(unsigned long gic_base_addr, - unsigned long gic_addrspace_size, - struct gic_intr_map *intr_map, unsigned int intr_map_size, + unsigned long gic_addrspace_size, unsigned int cpu_vec, unsigned int irqbase) { unsigned int gicconfig; @@ -472,7 +469,6 @@ void __init gic_init(unsigned long gic_base_addr, _gic_base = (unsigned long) ioremap_nocache(gic_base_addr, gic_addrspace_size); - gic_irq_base = irqbase; GICREAD(GIC_REG(SHARED, GIC_SH_CONFIG), gicconfig); numintrs = (gicconfig & GIC_SH_CONFIG_NUMINTRS_MSK) >> @@ -483,10 +479,23 @@ void __init gic_init(unsigned long gic_base_addr, GIC_SH_CONFIG_NUMVPES_SHF; numvpes = numvpes + 1; + if (cpu_has_veic) { + /* Always use vector 1 in EIC mode */ + gic_cpu_pin = 0; + set_vi_handler(gic_cpu_pin + GIC_PIN_TO_VEC_OFFSET, + __gic_irq_dispatch); + } else { + gic_cpu_pin = cpu_vec - GIC_CPU_PIN_OFFSET; + irq_set_chained_handler(MIPS_CPU_IRQ_BASE + cpu_vec, + gic_irq_dispatch); + } + gic_irq_domain = irq_domain_add_simple(NULL, GIC_NUM_INTRS, irqbase, &gic_irq_domain_ops, NULL); if (!gic_irq_domain) panic("Failed to add GIC IRQ domain"); - gic_basic_init(numintrs, numvpes, intr_map, intr_map_size); + gic_basic_init(numintrs, numvpes); + + gic_ipi_init(); } |