diff options
| -rw-r--r-- | drivers/net/ethernet/freescale/fsl_pq_mdio.c | 373 |
1 files changed, 221 insertions, 152 deletions
diff --git a/drivers/net/ethernet/freescale/fsl_pq_mdio.c b/drivers/net/ethernet/freescale/fsl_pq_mdio.c index 44f00a4780d7..7eef1bb0a65f 100644 --- a/drivers/net/ethernet/freescale/fsl_pq_mdio.c +++ b/drivers/net/ethernet/freescale/fsl_pq_mdio.c @@ -23,11 +23,10 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/module.h> -#include <linux/platform_device.h> #include <linux/mii.h> #include <linux/of_address.h> #include <linux/of_mdio.h> -#include <linux/of_platform.h> +#include <linux/of_device.h> #include <asm/io.h> #include <asm/ucc.h> /* for ucc_set_qe_mux_mii_mng() */ @@ -41,6 +40,15 @@ #define MII_READ_COMMAND 0x00000001 +struct fsl_pq_mii { + u32 miimcfg; /* MII management configuration reg */ + u32 miimcom; /* MII management command reg */ + u32 miimadd; /* MII management address reg */ + u32 miimcon; /* MII management control reg */ + u32 miimstat; /* MII management status reg */ + u32 miimind; /* MII management indication reg */ +}; + struct fsl_pq_mdio { u8 res1[16]; u32 ieventm; /* MDIO Interrupt event register (for etsec2)*/ @@ -48,12 +56,7 @@ struct fsl_pq_mdio { u8 res2[4]; u32 emapm; /* MDIO Event mapping register (for etsec2)*/ u8 res3[1280]; - u32 miimcfg; /* MII management configuration reg */ - u32 miimcom; /* MII management command reg */ - u32 miimadd; /* MII management address reg */ - u32 miimcon; /* MII management control reg */ - u32 miimstat; /* MII management status reg */ - u32 miimind; /* MII management indication reg */ + struct fsl_pq_mii mii; u8 res4[28]; u32 utbipar; /* TBI phy address reg (only on UCC) */ u8 res5[2728]; @@ -64,7 +67,25 @@ struct fsl_pq_mdio { struct fsl_pq_mdio_priv { void __iomem *map; - struct fsl_pq_mdio __iomem *regs; + struct fsl_pq_mii __iomem *regs; +}; + +/* + * Per-device-type data. Each type of device tree node that we support gets + * one of these. + * + * @mii_offset: the offset of the MII registers within the memory map of the + * node. Some nodes define only the MII registers, and some define the whole + * MAC (which includes the MII registers). + * + * @get_tbipa: determines the address of the TBIPA register + * + * @ucc_configure: a special function for extra QE configuration + */ +struct fsl_pq_mdio_data { + unsigned int mii_offset; /* offset of the MII registers */ + uint32_t __iomem * (*get_tbipa)(void __iomem *p); + void (*ucc_configure)(phys_addr_t start, phys_addr_t end); }; /* @@ -80,7 +101,7 @@ static int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value) { struct fsl_pq_mdio_priv *priv = bus->priv; - struct fsl_pq_mdio __iomem *regs = priv->regs; + struct fsl_pq_mii __iomem *regs = priv->regs; u32 status; /* Set the PHY address and the register address we want to write */ @@ -109,7 +130,7 @@ static int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum, static int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum) { struct fsl_pq_mdio_priv *priv = bus->priv; - struct fsl_pq_mdio __iomem *regs = priv->regs; + struct fsl_pq_mii __iomem *regs = priv->regs; u32 status; u16 value; @@ -130,6 +151,7 @@ static int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum) /* Grab the value of the register from miimstat */ value = in_be32(®s->miimstat); + dev_dbg(&bus->dev, "read %04x from address %x/%x\n", value, mii_id, regnum); return value; } @@ -137,7 +159,7 @@ static int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum) static int fsl_pq_mdio_reset(struct mii_bus *bus) { struct fsl_pq_mdio_priv *priv = bus->priv; - struct fsl_pq_mdio __iomem *regs = priv->regs; + struct fsl_pq_mii __iomem *regs = priv->regs; u32 status; mutex_lock(&bus->mdio_lock); @@ -162,84 +184,181 @@ static int fsl_pq_mdio_reset(struct mii_bus *bus) return 0; } -static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs, struct device_node *np) -{ #if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE) - struct gfar __iomem *enet_regs; +/* + * This is mildly evil, but so is our hardware for doing this. + * Also, we have to cast back to struct gfar because of + * definition weirdness done in gianfar.h. + */ +static uint32_t __iomem *get_gfar_tbipa(void __iomem *p) +{ + struct gfar __iomem *enet_regs = p; - /* - * This is mildly evil, but so is our hardware for doing this. - * Also, we have to cast back to struct gfar because of - * definition weirdness done in gianfar.h. - */ - if (of_device_is_compatible(np, "fsl,gianfar-mdio") || - of_device_is_compatible(np, "fsl,gianfar-tbi") || - of_device_is_compatible(np, "gianfar")) { - enet_regs = (struct gfar __iomem *)regs; - return &enet_regs->tbipa; - } else if (of_device_is_compatible(np, "fsl,etsec2-mdio") || - of_device_is_compatible(np, "fsl,etsec2-tbi")) { - return of_iomap(np, 1); - } -#endif - return NULL; + return &enet_regs->tbipa; } - -static int get_ucc_id_for_range(u64 start, u64 end, u32 *ucc_id) +/* + * Return the TBIPAR address for an eTSEC2 node + */ +static uint32_t __iomem *get_etsec_tbipa(void __iomem *p) { + return p; +} +#endif + #if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE) +/* + * Return the TBIPAR address for a QE MDIO node + */ +static uint32_t __iomem *get_ucc_tbipa(void __iomem *p) +{ + struct fsl_pq_mdio __iomem *mdio = p; + + return &mdio->utbipar; +} + +/* + * Find the UCC node that controls the given MDIO node + * + * For some reason, the QE MDIO nodes are not children of the UCC devices + * that control them. Therefore, we need to scan all UCC nodes looking for + * the one that encompases the given MDIO node. We do this by comparing + * physical addresses. The 'start' and 'end' addresses of the MDIO node are + * passed, and the correct UCC node will cover the entire address range. + * + * This assumes that there is only one QE MDIO node in the entire device tree. + */ +static void ucc_configure(phys_addr_t start, phys_addr_t end) +{ + static bool found_mii_master; struct device_node *np = NULL; - int err = 0; - for_each_compatible_node(np, NULL, "ucc_geth") { - struct resource tempres; + if (found_mii_master) + return; - err = of_address_to_resource(np, 0, &tempres); - if (err) + for_each_compatible_node(np, NULL, "ucc_geth") { + struct resource res; + const uint32_t *iprop; + uint32_t id; + int ret; + + ret = of_address_to_resource(np, 0, &res); + if (ret < 0) { + pr_debug("fsl-pq-mdio: no address range in node %s\n", + np->full_name); continue; + } /* if our mdio regs fall within this UCC regs range */ - if ((start >= tempres.start) && (end <= tempres.end)) { - /* Find the id of the UCC */ - const u32 *id; - - id = of_get_property(np, "cell-index", NULL); - if (!id) { - id = of_get_property(np, "device-id", NULL); - if (!id) - continue; + if ((start < res.start) || (end > res.end)) + continue; + + iprop = of_get_property(np, "cell-index", NULL); + if (!iprop) { + iprop = of_get_property(np, "device-id", NULL); + if (!iprop) { + pr_debug("fsl-pq-mdio: no UCC ID in node %s\n", + np->full_name); + continue; } + } - *ucc_id = *id; + id = be32_to_cpup(iprop); - return 0; + /* + * cell-index and device-id for QE nodes are + * numbered from 1, not 0. + */ + if (ucc_set_qe_mux_mii_mng(id - 1) < 0) { + pr_debug("fsl-pq-mdio: invalid UCC ID in node %s\n", + np->full_name); + continue; } + + pr_debug("fsl-pq-mdio: setting node UCC%u to MII master\n", id); + found_mii_master = true; } +} - if (err) - return err; - else - return -EINVAL; -#else - return -ENODEV; #endif -} + +static struct of_device_id fsl_pq_mdio_match[] = { +#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE) + { + .compatible = "fsl,gianfar-tbi", + .data = &(struct fsl_pq_mdio_data) { + .mii_offset = 0, + .get_tbipa = get_gfar_tbipa, + }, + }, + { + .compatible = "fsl,gianfar-mdio", + .data = &(struct fsl_pq_mdio_data) { + .mii_offset = 0, + .get_tbipa = get_gfar_tbipa, + }, + }, + { + .type = "mdio", + .compatible = "gianfar", + .data = &(struct fsl_pq_mdio_data) { + .mii_offset = offsetof(struct fsl_pq_mdio, mii), + .get_tbipa = get_gfar_tbipa, + }, + }, + { + .compatible = "fsl,etsec2-tbi", + .data = &(struct fsl_pq_mdio_data) { + .mii_offset = offsetof(struct fsl_pq_mdio, mii), + .get_tbipa = get_etsec_tbipa, + }, + }, + { + .compatible = "fsl,etsec2-mdio", + .data = &(struct fsl_pq_mdio_data) { + .mii_offset = offsetof(struct fsl_pq_mdio, mii), + .get_tbipa = get_etsec_tbipa, + }, + }, +#endif +#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE) + { + .compatible = "fsl,ucc-mdio", + .data = &(struct fsl_pq_mdio_data) { + .mii_offset = 0, + .get_tbipa = get_ucc_tbipa, + .ucc_configure = ucc_configure, + }, + }, + { + /* Legacy UCC MDIO node */ + .type = "mdio", + .compatible = "ucc_geth_phy", + .data = &(struct fsl_pq_mdio_data) { + .mii_offset = 0, + .get_tbipa = get_ucc_tbipa, + .ucc_configure = ucc_configure, + }, + }, +#endif + {}, +}; +MODULE_DEVICE_TABLE(of, fsl_pq_mdio_match); static int fsl_pq_mdio_probe(struct platform_device *pdev) { + const struct of_device_id *id = + of_match_device(fsl_pq_mdio_match, &pdev->dev); + const struct fsl_pq_mdio_data *data = id->data; struct device_node *np = pdev->dev.of_node; + struct resource res; struct device_node *tbi; struct fsl_pq_mdio_priv *priv; - struct fsl_pq_mdio __iomem *regs = NULL; - void __iomem *map; - u32 __iomem *tbipa; struct mii_bus *new_bus; - int tbiaddr = -1; - const u32 *addrp; - u64 addr = 0, size = 0; int err; + dev_dbg(&pdev->dev, "found %s compatible node\n", id->compatible); + priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; @@ -256,39 +375,35 @@ static int fsl_pq_mdio_probe(struct platform_device *pdev) new_bus->reset = &fsl_pq_mdio_reset; new_bus->priv = priv; - addrp = of_get_address(np, 0, &size, NULL); - if (!addrp) { - err = -EINVAL; - goto err_free_bus; - } - - /* Set the PHY base address */ - addr = of_translate_address(np, addrp); - if (addr == OF_BAD_ADDR) { - err = -EINVAL; + err = of_address_to_resource(np, 0, &res); + if (err < 0) { + dev_err(&pdev->dev, "could not obtain address information\n"); goto err_free_bus; } snprintf(new_bus->id, MII_BUS_ID_SIZE, "%s@%llx", np->name, - (unsigned long long)addr); + (unsigned long long)res.start); - map = ioremap(addr, size); - if (!map) { + priv->map = of_iomap(np, 0); + if (!priv->map) { err = -ENOMEM; goto err_free_bus; } - priv->map = map; - if (of_device_is_compatible(np, "fsl,gianfar-mdio") || - of_device_is_compatible(np, "fsl,gianfar-tbi") || - of_device_is_compatible(np, "fsl,ucc-mdio") || - of_device_is_compatible(np, "ucc_geth_phy")) - map -= offsetof(struct fsl_pq_mdio, miimcfg); - regs = map; - priv->regs = regs; + /* + * Some device tree nodes represent only the MII registers, and + * others represent the MAC and MII registers. The 'mii_offset' field + * contains the offset of the MII registers inside the mapped register + * space. + */ + if (data->mii_offset > resource_size(&res)) { + dev_err(&pdev->dev, "invalid register map\n"); + err = -EINVAL; + goto err_unmap_regs; + } + priv->regs = priv->map + data->mii_offset; new_bus->irq = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL); - if (NULL == new_bus->irq) { err = -ENOMEM; goto err_unmap_regs; @@ -297,54 +412,36 @@ static int fsl_pq_mdio_probe(struct platform_device *pdev) new_bus->parent = &pdev->dev; dev_set_drvdata(&pdev->dev, new_bus); - if (of_device_is_compatible(np, "fsl,gianfar-mdio") || - of_device_is_compatible(np, "fsl,gianfar-tbi") || - of_device_is_compatible(np, "fsl,etsec2-mdio") || - of_device_is_compatible(np, "fsl,etsec2-tbi") || - of_device_is_compatible(np, "gianfar")) { - tbipa = get_gfar_tbipa(regs, np); - if (!tbipa) { - err = -EINVAL; - goto err_free_irqs; - } - } else if (of_device_is_compatible(np, "fsl,ucc-mdio") || - of_device_is_compatible(np, "ucc_geth_phy")) { - u32 id; - static u32 mii_mng_master; - - tbipa = ®s->utbipar; - - if ((err = get_ucc_id_for_range(addr, addr + size, &id))) - goto err_free_irqs; - - if (!mii_mng_master) { - mii_mng_master = id; - ucc_set_qe_mux_mii_mng(id - 1); + if (data->get_tbipa) { + for_each_child_of_node(np, tbi) { + if (strcmp(tbi->type, "tbi-phy") == 0) { + dev_dbg(&pdev->dev, "found TBI PHY node %s\n", + strrchr(tbi->full_name, '/') + 1); + break; + } } - } else { - err = -ENODEV; - goto err_free_irqs; - } - for_each_child_of_node(np, tbi) { - if (!strncmp(tbi->type, "tbi-phy", 8)) - break; - } + if (tbi) { + const u32 *prop = of_get_property(tbi, "reg", NULL); + uint32_t __iomem *tbipa; - if (tbi) { - const u32 *prop = of_get_property(tbi, "reg", NULL); + if (!prop) { + dev_err(&pdev->dev, + "missing 'reg' property in node %s\n", + tbi->full_name); + err = -EBUSY; + goto error; + } - if (prop) - tbiaddr = *prop; + tbipa = data->get_tbipa(priv->map); - if (tbiaddr == -1) { - err = -EBUSY; - goto err_free_irqs; - } else { - out_be32(tbipa, tbiaddr); + out_be32(tbipa, be32_to_cpup(prop)); } } + if (data->ucc_configure) + data->ucc_configure(res.start, res.end); + err = of_mdiobus_register(new_bus, np); if (err) { dev_err(&pdev->dev, "cannot register %s as MDIO bus\n", @@ -384,34 +481,6 @@ static int fsl_pq_mdio_remove(struct platform_device *pdev) return 0; } -static struct of_device_id fsl_pq_mdio_match[] = { - { - .type = "mdio", - .compatible = "ucc_geth_phy", - }, - { - .type = "mdio", - .compatible = "gianfar", - }, - { - .compatible = "fsl,ucc-mdio", - }, - { - .compatible = "fsl,gianfar-tbi", - }, - { - .compatible = "fsl,gianfar-mdio", - }, - { - .compatible = "fsl,etsec2-tbi", - }, - { - .compatible = "fsl,etsec2-mdio", - }, - {}, -}; -MODULE_DEVICE_TABLE(of, fsl_pq_mdio_match); - static struct platform_driver fsl_pq_mdio_driver = { .driver = { .name = "fsl-pq_mdio", |