summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc3
-rw-r--r--Documentation/ABI/testing/sysfs-class-mic (renamed from Documentation/ABI/testing/sysfs-class-mic.txt)0
-rw-r--r--Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu128
-rw-r--r--Documentation/ABI/testing/sysfs-driver-habanalabs14
-rw-r--r--Documentation/ABI/testing/sysfs-platform-dfl-fme85
-rw-r--r--Documentation/ABI/testing/sysfs-platform-dfl-port85
-rw-r--r--Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt4
-rw-r--r--Documentation/devicetree/bindings/extcon/extcon-arizona.txt2
-rw-r--r--Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt4
-rw-r--r--Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt5
-rw-r--r--Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt5
-rw-r--r--Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt5
-rw-r--r--Documentation/devicetree/bindings/fpga/fpga-bridge.txt13
-rw-r--r--Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt8
-rw-r--r--Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt45
-rw-r--r--Documentation/devicetree/bindings/nvmem/imx-ocotp.txt3
-rw-r--r--Documentation/devicetree/bindings/pci/pci-armada8k.txt8
-rw-r--r--Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml95
-rw-r--r--Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt10
-rw-r--r--Documentation/driver-api/uio-howto.rst7
-rw-r--r--Documentation/fpga/dfl.rst105
-rw-r--r--Documentation/misc-devices/index.rst1
-rw-r--r--MAINTAINERS23
-rw-r--r--drivers/acpi/property.c6
-rw-r--r--drivers/android/binder.c100
-rw-r--r--drivers/android/binder_internal.h86
-rw-r--r--drivers/android/binderfs.c290
-rw-r--r--drivers/char/mem.c21
-rw-r--r--drivers/char/ppdev.c2
-rw-r--r--drivers/char/toshiba.c8
-rw-r--r--drivers/clk/qcom/clk-rpmh.c16
-rw-r--r--drivers/extcon/extcon-adc-jack.c4
-rw-r--r--drivers/extcon/extcon-arizona.c2
-rw-r--r--drivers/extcon/extcon-axp288.c16
-rw-r--r--drivers/extcon/extcon-fsa9480.c1
-rw-r--r--drivers/extcon/extcon-gpio.c29
-rw-r--r--drivers/extcon/extcon-max77843.c6
-rw-r--r--drivers/extcon/extcon-sm5502.c2
-rw-r--r--drivers/firmware/Kconfig18
-rw-r--r--drivers/firmware/Makefile1
-rw-r--r--drivers/firmware/google/vpd.c4
-rw-r--r--drivers/firmware/google/vpd_decode.c55
-rw-r--r--drivers/firmware/google/vpd_decode.h6
-rw-r--r--drivers/firmware/stratix10-rsu.c451
-rw-r--r--drivers/firmware/stratix10-svc.c76
-rw-r--r--drivers/fpga/Kconfig6
-rw-r--r--drivers/fpga/Makefile3
-rw-r--r--drivers/fpga/altera-cvp.c342
-rw-r--r--drivers/fpga/altera-pr-ip-core-plat.c4
-rw-r--r--drivers/fpga/altera-pr-ip-core.c4
-rw-r--r--drivers/fpga/dfl-afu-error.c230
-rw-r--r--drivers/fpga/dfl-afu-main.c381
-rw-r--r--drivers/fpga/dfl-afu.h9
-rw-r--r--drivers/fpga/dfl-fme-error.c359
-rw-r--r--drivers/fpga/dfl-fme-main.c128
-rw-r--r--drivers/fpga/dfl-fme-pr.c7
-rw-r--r--drivers/fpga/dfl-fme.h6
-rw-r--r--drivers/fpga/dfl-pci.c36
-rw-r--r--drivers/fpga/dfl.c226
-rw-r--r--drivers/fpga/dfl.h52
-rw-r--r--drivers/hwtracing/coresight/coresight-cpu-debug.c33
-rw-r--r--drivers/hwtracing/coresight/coresight-etm4x-sysfs.c13
-rw-r--r--drivers/hwtracing/coresight/coresight-etm4x.c38
-rw-r--r--drivers/hwtracing/coresight/coresight-funnel.c11
-rw-r--r--drivers/hwtracing/coresight/coresight-priv.h10
-rw-r--r--drivers/hwtracing/coresight/coresight-replicator.c3
-rw-r--r--drivers/hwtracing/coresight/coresight-tmc-etf.c23
-rw-r--r--drivers/hwtracing/coresight/coresight-tmc-etr.c93
-rw-r--r--drivers/hwtracing/coresight/coresight-tmc.c40
-rw-r--r--drivers/hwtracing/coresight/coresight-tmc.h11
-rw-r--r--drivers/hwtracing/intel_th/Makefile3
-rw-r--r--drivers/hwtracing/intel_th/msu-sink.c116
-rw-r--r--drivers/hwtracing/intel_th/msu.c537
-rw-r--r--drivers/hwtracing/intel_th/msu.h20
-rw-r--r--drivers/interconnect/core.c27
-rw-r--r--drivers/interconnect/qcom/Kconfig12
-rw-r--r--drivers/interconnect/qcom/Makefile4
-rw-r--r--drivers/interconnect/qcom/qcs404.c539
-rw-r--r--drivers/interconnect/qcom/sdm845.c160
-rw-r--r--drivers/interconnect/qcom/smd-rpm.c77
-rw-r--r--drivers/interconnect/qcom/smd-rpm.h15
-rw-r--r--drivers/misc/Kconfig9
-rw-r--r--drivers/misc/Makefile1
-rw-r--r--drivers/misc/cardreader/alcor_pci.c6
-rw-r--r--drivers/misc/eeprom/Kconfig5
-rw-r--r--drivers/misc/eeprom/ee1004.c6
-rw-r--r--drivers/misc/eeprom/max6875.c6
-rw-r--r--drivers/misc/fastrpc.c79
-rw-r--r--drivers/misc/habanalabs/asid.c2
-rw-r--r--drivers/misc/habanalabs/command_buffer.c3
-rw-r--r--drivers/misc/habanalabs/command_submission.c27
-rw-r--r--drivers/misc/habanalabs/context.c40
-rw-r--r--drivers/misc/habanalabs/debugfs.c16
-rw-r--r--drivers/misc/habanalabs/device.c488
-rw-r--r--drivers/misc/habanalabs/goya/goya.c95
-rw-r--r--drivers/misc/habanalabs/goya/goyaP.h19
-rw-r--r--drivers/misc/habanalabs/goya/goya_coresight.c89
-rw-r--r--drivers/misc/habanalabs/goya/goya_hwmgr.c109
-rw-r--r--drivers/misc/habanalabs/habanalabs.h129
-rw-r--r--drivers/misc/habanalabs/habanalabs_drv.c171
-rw-r--r--drivers/misc/habanalabs/habanalabs_ioctl.c180
-rw-r--r--drivers/misc/habanalabs/hw_queue.c18
-rw-r--r--drivers/misc/habanalabs/hwmon.c24
-rw-r--r--drivers/misc/habanalabs/include/armcp_if.h85
-rw-r--r--drivers/misc/habanalabs/include/goya/goya.h2
-rw-r--r--drivers/misc/habanalabs/include/goya/goya_reg_map.h34
-rw-r--r--drivers/misc/habanalabs/irq.c4
-rw-r--r--drivers/misc/habanalabs/sysfs.c126
-rw-r--r--drivers/misc/lkdtm/Makefile1
-rw-r--r--drivers/misc/lkdtm/bugs.c7
-rw-r--r--drivers/misc/lkdtm/cfi.c42
-rw-r--r--drivers/misc/lkdtm/core.c2
-rw-r--r--drivers/misc/lkdtm/lkdtm.h4
-rw-r--r--drivers/misc/mei/pci-me.c19
-rw-r--r--drivers/misc/mei/pci-txe.c19
-rw-r--r--drivers/misc/mic/card/mic_x100.c28
-rw-r--r--drivers/misc/mic/scif/scif_epd.h5
-rw-r--r--drivers/misc/sgi-xp/xpc_uv.c4
-rw-r--r--drivers/misc/spear13xx_pcie_gadget.c797
-rw-r--r--drivers/misc/xilinx_sdfec.c1214
-rw-r--r--drivers/nvmem/imx-ocotp-scu.c7
-rw-r--r--drivers/nvmem/imx-ocotp.c7
-rw-r--r--drivers/nvmem/meson-mx-efuse.c3
-rw-r--r--drivers/nvmem/mxs-ocotp.c2
-rw-r--r--drivers/nvmem/sunxi_sid.c1
-rw-r--r--drivers/parport/Makefile2
-rw-r--r--drivers/parport/parport_serial.c6
-rw-r--r--drivers/pcmcia/i82092.c6
-rw-r--r--drivers/phy/Makefile2
-rw-r--r--drivers/phy/lantiq/Kconfig11
-rw-r--r--drivers/phy/lantiq/Makefile1
-rw-r--r--drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c494
-rw-r--r--drivers/phy/marvell/Kconfig1
-rw-r--r--drivers/phy/marvell/phy-armada38x-comphy.c4
-rw-r--r--drivers/phy/marvell/phy-mvebu-a3700-comphy.c17
-rw-r--r--drivers/phy/marvell/phy-mvebu-cp110-comphy.c525
-rw-r--r--drivers/phy/phy-core.c10
-rw-r--r--drivers/phy/qualcomm/phy-qcom-qmp.c44
-rw-r--r--drivers/phy/renesas/phy-rcar-gen3-usb2.c2
-rw-r--r--drivers/phy/rockchip/phy-rockchip-inno-hdmi.c2
-rw-r--r--drivers/phy/samsung/phy-exynos-dp-video.c1
-rw-r--r--drivers/phy/samsung/phy-exynos-mipi-video.c1
-rw-r--r--drivers/phy/samsung/phy-exynos-pcie.c1
-rw-r--r--drivers/phy/samsung/phy-exynos5-usbdrd.c1
-rw-r--r--drivers/phy/samsung/phy-exynos5250-sata.c1
-rw-r--r--drivers/phy/samsung/phy-samsung-usb2.c1
-rw-r--r--drivers/phy/ti/phy-am654-serdes.c33
-rw-r--r--drivers/slimbus/qcom-ngd-ctrl.c5
-rw-r--r--drivers/slimbus/slimbus.h2
-rw-r--r--drivers/thunderbolt/Makefile2
-rw-r--r--drivers/thunderbolt/ctl.c23
-rw-r--r--drivers/thunderbolt/eeprom.c6
-rw-r--r--drivers/thunderbolt/icm.c194
-rw-r--r--drivers/thunderbolt/nhi.c134
-rw-r--r--drivers/thunderbolt/nhi.h22
-rw-r--r--drivers/thunderbolt/nhi_ops.c179
-rw-r--r--drivers/thunderbolt/nhi_regs.h37
-rw-r--r--drivers/thunderbolt/switch.c52
-rw-r--r--drivers/thunderbolt/tb_msgs.h16
-rw-r--r--drivers/thunderbolt/tunnel.c4
-rw-r--r--drivers/thunderbolt/xdomain.c2
-rw-r--r--drivers/uio/uio_dmem_genirq.c4
-rw-r--r--drivers/uio/uio_pdrv_genirq.c14
-rw-r--r--drivers/w1/masters/Kconfig9
-rw-r--r--drivers/w1/masters/Makefile1
-rw-r--r--drivers/w1/masters/mxc_w1.c4
-rw-r--r--drivers/w1/masters/omap_hdq.c4
-rw-r--r--drivers/w1/masters/sgi_w1.c130
-rw-r--r--drivers/w1/slaves/Kconfig6
-rw-r--r--drivers/w1/slaves/Makefile1
-rw-r--r--drivers/w1/slaves/w1_ds250x.c290
-rw-r--r--include/dt-bindings/interconnect/qcom,qcs404.h88
-rw-r--r--include/dt-bindings/phy/phy-lantiq-vrx200-pcie.h11
-rw-r--r--include/linux/firmware/intel/stratix10-smc.h51
-rw-r--r--include/linux/firmware/intel/stratix10-svc-client.h11
-rw-r--r--include/linux/fpga/altera-pr-ip-core.h2
-rw-r--r--include/linux/intel_th.h79
-rw-r--r--include/linux/interconnect-provider.h7
-rw-r--r--include/linux/interconnect.h5
-rw-r--r--include/linux/platform_data/sgi-w1.h13
-rw-r--r--include/linux/thunderbolt.h2
-rw-r--r--include/linux/w1.h5
-rw-r--r--include/soc/qcom/tcs.h20
-rw-r--r--include/uapi/linux/fpga-dfl.h18
-rw-r--r--include/uapi/linux/ppdev.h5
-rw-r--r--include/uapi/misc/habanalabs.h102
-rw-r--r--include/uapi/misc/xilinx_sdfec.h448
-rw-r--r--lib/test_firmware.c50
-rwxr-xr-xtools/testing/selftests/firmware/fw_filesystem.sh57
-rwxr-xr-xtools/testing/selftests/firmware/fw_lib.sh11
190 files changed, 10364 insertions, 2299 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc b/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc
index f54ae244f3f1..456cb62b384c 100644
--- a/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc
+++ b/Documentation/ABI/testing/sysfs-bus-intel_th-devices-msc
@@ -12,7 +12,8 @@ Description: (RW) Configure MSC operating mode:
- "single", for contiguous buffer mode (high-order alloc);
- "multi", for multiblock mode;
- "ExI", for DCI handler mode;
- - "debug", for debug mode.
+ - "debug", for debug mode;
+ - any of the currently loaded buffer sinks.
If operating mode changes, existing buffer is deallocated,
provided there are no active users and tracing is not enabled,
otherwise the write will fail.
diff --git a/Documentation/ABI/testing/sysfs-class-mic.txt b/Documentation/ABI/testing/sysfs-class-mic
index 6ef682603179..6ef682603179 100644
--- a/Documentation/ABI/testing/sysfs-class-mic.txt
+++ b/Documentation/ABI/testing/sysfs-class-mic
diff --git a/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu b/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
new file mode 100644
index 000000000000..ae9af984471a
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
@@ -0,0 +1,128 @@
+ Intel Stratix10 Remote System Update (RSU) device attributes
+
+What: /sys/devices/platform/stratix10-rsu.0/current_image
+Date: August 2019
+KernelVersion: 5.4
+Contact: Richard Gong <richard.gong@linux.intel.com>
+Description:
+ (RO) the address in flash of currently running image.
+
+What: /sys/devices/platform/stratix10-rsu.0/fail_image
+Date: August 2019
+KernelVersion: 5.4
+Contact: Richard Gong <richard.gong@linux.intel.com>
+Description:
+ (RO) the address in flash of failed image.
+
+What: /sys/devices/platform/stratix10-rsu.0/state
+Date: August 2019
+KernelVersion: 5.4
+Contact: Richard Gong <richard.gong@linux.intel.com>
+Description:
+ (RO) the state of RSU system.
+ The state field has two parts: major error code in
+ upper 16 bits and minor error code in lower 16 bits.
+
+ b[15:0]
+ Currently used only when major error is 0xF006
+ (CPU watchdog timeout), in which case the minor
+ error code is the value reported by CPU to
+ firmware through the RSU notify command before
+ the watchdog timeout occurs.
+
+ b[31:16]
+ 0xF001 bitstream error
+ 0xF002 hardware access failure
+ 0xF003 bitstream corruption
+ 0xF004 internal error
+ 0xF005 device error
+ 0xF006 CPU watchdog timeout
+ 0xF007 internal unknown error
+
+What: /sys/devices/platform/stratix10-rsu.0/version
+Date: August 2019
+KernelVersion: 5.4
+Contact: Richard Gong <richard.gong@linux.intel.com>
+Description:
+ (RO) the version number of RSU firmware. 19.3 or late
+ version includes information about the firmware which
+ reported the error.
+
+ pre 19.3:
+ b[31:0]
+ 0x0 version number
+
+ 19.3 or late:
+ b[15:0]
+ 0x1 version number
+ b[31:16]
+ 0x0 no error
+ 0x0DCF Decision CMF error
+ 0x0ACF Application CMF error
+
+What: /sys/devices/platform/stratix10-rsu.0/error_location
+Date: August 2019
+KernelVersion: 5.4
+Contact: Richard Gong <richard.gong@linux.intel.com>
+Description:
+ (RO) the error offset inside the image that failed.
+
+What: /sys/devices/platform/stratix10-rsu.0/error_details
+Date: August 2019
+KernelVersion: 5.4
+Contact: Richard Gong <richard.gong@linux.intel.com>
+Description:
+ (RO) error code.
+
+What: /sys/devices/platform/stratix10-rsu.0/retry_counter
+Date: August 2019
+KernelVersion: 5.4
+Contact: Richard Gong <richard.gong@linux.intel.com>
+Description:
+ (RO) the current image's retry counter, which is used by
+ user to know how many times the images is still allowed
+ to reload itself before giving up and starting RSU
+ fail-over flow.
+
+What: /sys/devices/platform/stratix10-rsu.0/reboot_image
+Date: August 2019
+KernelVersion: 5.4
+Contact: Richard Gong <richard.gong@linux.intel.com>
+Description:
+ (WO) the address in flash of image to be loaded on next
+ reboot command.
+
+What: /sys/devices/platform/stratix10-rsu.0/notify
+Date: August 2019
+KernelVersion: 5.4
+Contact: Richard Gong <richard.gong@linux.intel.com>
+Description:
+ (WO) client to notify firmware with different actions.
+
+ b[15:0]
+ inform firmware the current software execution
+ stage.
+ 0 the first stage bootloader didn't run or
+ didn't reach the point of launching second
+ stage bootloader.
+ 1 failed in second bootloader or didn't get
+ to the point of launching the operating
+ system.
+ 2 both first and second stage bootloader ran
+ and the operating system launch was
+ attempted.
+
+ b[16]
+ 1 firmware to reset current image retry
+ counter.
+ 0 no action.
+
+ b[17]
+ 1 firmware to clear RSU log
+ 0 no action.
+
+ b[18]
+ this is negative logic
+ 1 no action
+ 0 firmware record the notify code defined
+ in b[15:0].
diff --git a/Documentation/ABI/testing/sysfs-driver-habanalabs b/Documentation/ABI/testing/sysfs-driver-habanalabs
index f433fc6db3c6..782df74042ed 100644
--- a/Documentation/ABI/testing/sysfs-driver-habanalabs
+++ b/Documentation/ABI/testing/sysfs-driver-habanalabs
@@ -57,6 +57,7 @@ KernelVersion: 5.1
Contact: oded.gabbay@gmail.com
Description: Allows the user to set the maximum clock frequency for MME, TPC
and IC when the power management profile is set to "automatic".
+ This property is valid only for the Goya ASIC family
What: /sys/class/habanalabs/hl<n>/ic_clk
Date: Jan 2019
@@ -127,8 +128,8 @@ Description: Power management profile. Values are "auto", "manual". In "auto"
the max clock frequency to a low value when there are no user
processes that are opened on the device's file. In "manual"
mode, the user sets the maximum clock frequency by writing to
- ic_clk, mme_clk and tpc_clk
-
+ ic_clk, mme_clk and tpc_clk. This property is valid only for
+ the Goya ASIC family
What: /sys/class/habanalabs/hl<n>/preboot_btl_ver
Date: Jan 2019
@@ -186,11 +187,4 @@ What: /sys/class/habanalabs/hl<n>/uboot_ver
Date: Jan 2019
KernelVersion: 5.1
Contact: oded.gabbay@gmail.com
-Description: Version of the u-boot running on the device's CPU
-
-What: /sys/class/habanalabs/hl<n>/write_open_cnt
-Date: Jan 2019
-KernelVersion: 5.1
-Contact: oded.gabbay@gmail.com
-Description: Displays the total number of user processes that are currently
- opened on the device's file
+Description: Version of the u-boot running on the device's CPU \ No newline at end of file
diff --git a/Documentation/ABI/testing/sysfs-platform-dfl-fme b/Documentation/ABI/testing/sysfs-platform-dfl-fme
index 8fa4febfa4b2..72634d3ae4f4 100644
--- a/Documentation/ABI/testing/sysfs-platform-dfl-fme
+++ b/Documentation/ABI/testing/sysfs-platform-dfl-fme
@@ -21,3 +21,88 @@ Contact: Wu Hao <hao.wu@intel.com>
Description: Read-only. It returns Bitstream (static FPGA region) meta
data, which includes the synthesis date, seed and other
information of this static FPGA region.
+
+What: /sys/bus/platform/devices/dfl-fme.0/cache_size
+Date: August 2019
+KernelVersion: 5.4
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read-only. It returns cache size of this FPGA device.
+
+What: /sys/bus/platform/devices/dfl-fme.0/fabric_version
+Date: August 2019
+KernelVersion: 5.4
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read-only. It returns fabric version of this FPGA device.
+ Userspace applications need this information to select
+ best data channels per different fabric design.
+
+What: /sys/bus/platform/devices/dfl-fme.0/socket_id
+Date: August 2019
+KernelVersion: 5.4
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read-only. It returns socket_id to indicate which socket
+ this FPGA belongs to, only valid for integrated solution.
+ User only needs this information, in case standard numa node
+ can't provide correct information.
+
+What: /sys/bus/platform/devices/dfl-fme.0/errors/pcie0_errors
+Date: August 2019
+KernelVersion: 5.4
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read-Write. Read this file for errors detected on pcie0 link.
+ Write this file to clear errors logged in pcie0_errors. Write
+ fails with -EINVAL if input parsing fails or input error code
+ doesn't match.
+
+What: /sys/bus/platform/devices/dfl-fme.0/errors/pcie1_errors
+Date: August 2019
+KernelVersion: 5.4
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read-Write. Read this file for errors detected on pcie1 link.
+ Write this file to clear errors logged in pcie1_errors. Write
+ fails with -EINVAL if input parsing fails or input error code
+ doesn't match.
+
+What: /sys/bus/platform/devices/dfl-fme.0/errors/nonfatal_errors
+Date: August 2019
+KernelVersion: 5.4
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read-only. It returns non-fatal errors detected.
+
+What: /sys/bus/platform/devices/dfl-fme.0/errors/catfatal_errors
+Date: August 2019
+KernelVersion: 5.4
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read-only. It returns catastrophic and fatal errors detected.
+
+What: /sys/bus/platform/devices/dfl-fme.0/errors/inject_errors
+Date: August 2019
+KernelVersion: 5.4
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read-Write. Read this file to check errors injected. Write this
+ file to inject errors for testing purpose. Write fails with
+ -EINVAL if input parsing fails or input inject error code isn't
+ supported.
+
+What: /sys/bus/platform/devices/dfl-fme.0/errors/fme_errors
+Date: August 2019
+KernelVersion: 5.4
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read-Write. Read this file to get errors detected on FME.
+ Write this file to clear errors logged in fme_errors. Write
+ fials with -EINVAL if input parsing fails or input error code
+ doesn't match.
+
+What: /sys/bus/platform/devices/dfl-fme.0/errors/first_error
+Date: August 2019
+KernelVersion: 5.4
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read-only. Read this file to get the first error detected by
+ hardware.
+
+What: /sys/bus/platform/devices/dfl-fme.0/errors/next_error
+Date: August 2019
+KernelVersion: 5.4
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read-only. Read this file to get the second error detected by
+ hardware.
diff --git a/Documentation/ABI/testing/sysfs-platform-dfl-port b/Documentation/ABI/testing/sysfs-platform-dfl-port
index 6a92dda517b0..65658267fcc0 100644
--- a/Documentation/ABI/testing/sysfs-platform-dfl-port
+++ b/Documentation/ABI/testing/sysfs-platform-dfl-port
@@ -14,3 +14,88 @@ Description: Read-only. User can program different PR bitstreams to FPGA
Accelerator Function Unit (AFU) for different functions. It
returns uuid which could be used to identify which PR bitstream
is programmed in this AFU.
+
+What: /sys/bus/platform/devices/dfl-port.0/power_state
+Date: August 2019
+KernelVersion: 5.4
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read-only. It reports the APx (AFU Power) state, different APx
+ means different throttling level. When reading this file, it
+ returns "0" - Normal / "1" - AP1 / "2" - AP2 / "6" - AP6.
+
+What: /sys/bus/platform/devices/dfl-port.0/ap1_event
+Date: August 2019
+KernelVersion: 5.4
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read-write. Read this file for AP1 (AFU Power State 1) event.
+ It's used to indicate transient AP1 state. Write 1 to this
+ file to clear AP1 event.
+
+What: /sys/bus/platform/devices/dfl-port.0/ap2_event
+Date: August 2019
+KernelVersion: 5.4
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read-write. Read this file for AP2 (AFU Power State 2) event.
+ It's used to indicate transient AP2 state. Write 1 to this
+ file to clear AP2 event.
+
+What: /sys/bus/platform/devices/dfl-port.0/ltr
+Date: August 2019
+KernelVersion: 5.4
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read-write. Read or set AFU latency tolerance reporting value.
+ Set ltr to 1 if the AFU can tolerate latency >= 40us or set it
+ to 0 if it is latency sensitive.
+
+What: /sys/bus/platform/devices/dfl-port.0/userclk_freqcmd
+Date: August 2019
+KernelVersion: 5.4
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Write-only. User writes command to this interface to set
+ userclock to AFU.
+
+What: /sys/bus/platform/devices/dfl-port.0/userclk_freqsts
+Date: August 2019
+KernelVersion: 5.4
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read-only. Read this file to get the status of issued command
+ to userclck_freqcmd.
+
+What: /sys/bus/platform/devices/dfl-port.0/userclk_freqcntrcmd
+Date: August 2019
+KernelVersion: 5.4
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Write-only. User writes command to this interface to set
+ userclock counter.
+
+What: /sys/bus/platform/devices/dfl-port.0/userclk_freqcntrsts
+Date: August 2019
+KernelVersion: 5.4
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read-only. Read this file to get the status of issued command
+ to userclck_freqcntrcmd.
+
+What: /sys/bus/platform/devices/dfl-port.0/errors/errors
+Date: August 2019
+KernelVersion: 5.4
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read-Write. Read this file to get errors detected on port and
+ Accelerated Function Unit (AFU). Write error code to this file
+ to clear errors. Write fails with -EINVAL if input parsing
+ fails or input error code doesn't match. Write fails with
+ -EBUSY or -ETIMEDOUT if error can't be cleared as hardware
+ in low power state (-EBUSY) or not respoding (-ETIMEDOUT).
+
+What: /sys/bus/platform/devices/dfl-port.0/errors/first_error
+Date: August 2019
+KernelVersion: 5.4
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read-only. Read this file to get the first error detected by
+ hardware.
+
+What: /sys/bus/platform/devices/dfl-port.0/errors/first_malformed_req
+Date: August 2019
+KernelVersion: 5.4
+Contact: Wu Hao <hao.wu@intel.com>
+Description: Read-only. Read this file to get the first malformed request
+ captured by hardware.
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
index a575e42f7fec..c149fadc6f47 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
@@ -136,7 +136,9 @@ Required properties:
OCOTP bindings based on SCU Message Protocol
------------------------------------------------------------
Required properties:
-- compatible: Should be "fsl,imx8qxp-scu-ocotp"
+- compatible: Should be one of:
+ "fsl,imx8qm-scu-ocotp",
+ "fsl,imx8qxp-scu-ocotp".
- #address-cells: Must be 1. Contains byte index
- #size-cells: Must be 1. Contains byte length
diff --git a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt
index 7f3d94ae81ff..208daaff0be4 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt
+++ b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt
@@ -72,5 +72,5 @@ codec: wm8280@0 {
1 2 1 /* MICDET2 MICBIAS2 GPIO=high */
>;
- wlf,gpsw = <0>;
+ wlf,gpsw = <ARIZONA_GPSW_OPEN>;
};
diff --git a/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt b/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt
index d592c21245f2..624bd76f468e 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt
+++ b/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt
@@ -5,7 +5,9 @@ controlled using I2C and enables USB data, stereo and mono audio, video,
microphone, and UART data to use a common connector port.
Required properties:
- - compatible : Must be "fcs,fsa9480"
+ - compatible : Must be one of
+ "fcs,fsa9480"
+ "fcs,fsa880"
- reg : Specifies i2c slave address. Must be 0x25.
- interrupts : Should contain one entry specifying interrupt signal of
interrupt parent to which interrupt pin of the chip is connected.
diff --git a/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
index 817a8d4bf903..5dd0ff0f7b4e 100644
--- a/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
+++ b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
@@ -3,10 +3,7 @@ Altera FPGA To SDRAM Bridge Driver
Required properties:
- compatible : Should contain "altr,socfpga-fpga2sdram-bridge"
-Optional properties:
-- bridge-enable : 0 if driver should disable bridge at startup
- 1 if driver should enable bridge at startup
- Default is to leave bridge in current state.
+See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
Example:
fpga_bridge3: fpga-bridge@ffc25080 {
diff --git a/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt
index f8e288c71b2d..8b26fbcff3c6 100644
--- a/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt
+++ b/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt
@@ -10,10 +10,7 @@ Required properties:
- compatible : Should contain "altr,freeze-bridge-controller"
- regs : base address and size for freeze bridge module
-Optional properties:
-- bridge-enable : 0 if driver should disable bridge at startup
- 1 if driver should enable bridge at startup
- Default is to leave bridge in current state.
+See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
Example:
freeze-controller@100000450 {
diff --git a/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
index 6406f9337eeb..68cce3945b10 100644
--- a/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
+++ b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
@@ -9,10 +9,7 @@ Required properties:
- resets : Phandle and reset specifier for this bridge's reset
- clocks : Clocks used by this module.
-Optional properties:
-- bridge-enable : 0 if driver should disable bridge at startup.
- 1 if driver should enable bridge at startup.
- Default is to leave bridge in its current state.
+See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
Example:
fpga_bridge0: fpga-bridge@ff400000 {
diff --git a/Documentation/devicetree/bindings/fpga/fpga-bridge.txt b/Documentation/devicetree/bindings/fpga/fpga-bridge.txt
new file mode 100644
index 000000000000..72e06917288a
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/fpga-bridge.txt
@@ -0,0 +1,13 @@
+FPGA Bridge Device Tree Binding
+
+Optional properties:
+- bridge-enable : 0 if driver should disable bridge at startup
+ 1 if driver should enable bridge at startup
+ Default is to leave bridge in current state.
+
+Example:
+ fpga_bridge3: fpga-bridge@ffc25080 {
+ compatible = "altr,socfpga-fpga2sdram-bridge";
+ reg = <0xffc25080 0x4>;
+ bridge-enable = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
index 8dcfba926bc7..4284d293fa61 100644
--- a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
+++ b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
@@ -18,12 +18,8 @@ Required properties:
- clocks : input clock to IP
- clock-names : should contain "aclk"
-Optional properties:
-- bridge-enable : 0 if driver should disable bridge at startup
- 1 if driver should enable bridge at startup
- Default is to leave bridge in current state.
-
-See Documentation/devicetree/bindings/fpga/fpga-region.txt for generic bindings.
+See Documentation/devicetree/bindings/fpga/fpga-region.txt and
+Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
Example:
fpga-bridge@100000450 {
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
new file mode 100644
index 000000000000..c07d89812b73
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
@@ -0,0 +1,45 @@
+Qualcomm QCS404 Network-On-Chip interconnect driver binding
+-----------------------------------------------------------
+
+Required properties :
+- compatible : shall contain only one of the following:
+ "qcom,qcs404-bimc"
+ "qcom,qcs404-pcnoc"
+ "qcom,qcs404-snoc"
+- #interconnect-cells : should contain 1
+
+reg : specifies the physical base address and size of registers
+clocks : list of phandles and specifiers to all interconnect bus clocks
+clock-names : clock names should include both "bus" and "bus_a"
+
+Example:
+
+soc {
+ ...
+ bimc: interconnect@400000 {
+ reg = <0x00400000 0x80000>;
+ compatible = "qcom,qcs404-bimc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+ <&rpmcc RPM_SMD_BIMC_A_CLK>;
+ };
+
+ pnoc: interconnect@500000 {
+ reg = <0x00500000 0x15080>;
+ compatible = "qcom,qcs404-pcnoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
+ <&rpmcc RPM_SMD_PNOC_A_CLK>;
+ };
+
+ snoc: interconnect@580000 {
+ reg = <0x00580000 0x23080>;
+ compatible = "qcom,qcs404-snoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+ <&rpmcc RPM_SMD_SNOC_A_CLK>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
index 96ffd06d2ca8..904dadf3d07b 100644
--- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
+++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
@@ -2,7 +2,7 @@ Freescale i.MX6 On-Chip OTP Controller (OCOTP) device tree bindings
This binding represents the on-chip eFuse OTP controller found on
i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ, i.MX6SLL,
-i.MX7D/S, i.MX7ULP and i.MX8MQ SoCs.
+i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM and i.MX8MN SoCs.
Required properties:
- compatible: should be one of
@@ -16,6 +16,7 @@ Required properties:
"fsl,imx7ulp-ocotp" (i.MX7ULP),
"fsl,imx8mq-ocotp" (i.MX8MQ),
"fsl,imx8mm-ocotp" (i.MX8MM),
+ "fsl,imx8mn-ocotp" (i.MX8MN),
followed by "syscon".
- #address-cells : Should be 1
- #size-cells : Should be 1
diff --git a/Documentation/devicetree/bindings/pci/pci-armada8k.txt b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
index 9e3fc15e1af8..8324a4ee6f06 100644
--- a/Documentation/devicetree/bindings/pci/pci-armada8k.txt
+++ b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
@@ -17,6 +17,14 @@ Required properties:
name must be "core" for the first clock and "reg" for the second
one
+Optional properties:
+- phys: phandle(s) to PHY node(s) following the generic PHY bindings.
+ Either 1, 2 or 4 PHYs might be needed depending on the number of
+ PCIe lanes.
+- phy-names: names of the PHYs corresponding to the number of lanes.
+ Must be "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy" for
+ 2 PHYs.
+
Example:
pcie@f2600000 {
diff --git a/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml
new file mode 100644
index 000000000000..8a56a8526cef
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/lantiq,vrx200-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq VRX200 and ARX300 PCIe PHY Device Tree Bindings
+
+maintainers:
+ - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+properties:
+ "#phy-cells":
+ const: 1
+ description: selects the PHY mode as defined in <dt-bindings/phy/phy-lantiq-vrx200-pcie.h>
+
+ compatible:
+ enum:
+ - lantiq,vrx200-pcie-phy
+ - lantiq,arx300-pcie-phy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: PHY module clock
+ - description: PDI register clock
+
+ clock-names:
+ items:
+ - const: phy
+ - const: pdi
+
+ resets:
+ items:
+ - description: exclusive PHY reset line
+ - description: shared reset line between the PCIe PHY and PCIe controller
+
+ resets-names:
+ items:
+ - const: phy
+ - const: pcie
+
+ lantiq,rcu:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to the RCU syscon
+
+ lantiq,rcu-endian-offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: the offset of the endian registers for this PHY instance in the RCU syscon
+
+ lantiq,rcu-big-endian-mask:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: the mask to set the PDI (PHY) registers for this PHY instance to big endian
+
+ big-endian:
+ description: Configures the PDI (PHY) registers in big-endian mode
+ type: boolean
+
+ little-endian:
+ description: Configures the PDI (PHY) registers in big-endian mode
+ type: boolean
+
+required:
+ - "#phy-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - lantiq,rcu
+ - lantiq,rcu-endian-offset
+ - lantiq,rcu-big-endian-mask
+
+additionalProperties: false
+
+examples:
+ - |
+ pcie0_phy: phy@106800 {
+ compatible = "lantiq,vrx200-pcie-phy";
+ reg = <0x106800 0x100>;
+ lantiq,rcu = <&rcu0>;
+ lantiq,rcu-endian-offset = <0x4c>;
+ lantiq,rcu-big-endian-mask = <0x80>; /* bit 7 */
+ big-endian;
+ clocks = <&pmu 32>, <&pmu 36>;
+ clock-names = "phy", "pdi";
+ resets = <&reset0 12 24>, <&reset0 22 22>;
+ reset-names = "phy", "pcie";
+ #phy-cells = <1>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
index cf2cd86db267..8c60e6985950 100644
--- a/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
+++ b/Documentation/devicetree/bindings/phy/phy-mvebu-comphy.txt
@@ -25,6 +25,13 @@ Required properties:
- #address-cells: should be 1.
- #size-cells: should be 0.
+Optional properlties:
+
+- clocks: pointers to the reference clocks for this device (CP110 only),
+ consequently: MG clock, MG Core clock, AXI clock.
+- clock-names: names of used clocks for CP110 only, must be :
+ "mg_clk", "mg_core_clk" and "axi_clk".
+
A sub-node is required for each comphy lane provided by the comphy.
Required properties (child nodes):
@@ -39,6 +46,9 @@ Examples:
compatible = "marvell,comphy-cp110";
reg = <0x120000 0x6000>;
marvell,system-controller = <&cpm_syscon0>;
+ clocks = <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>,
+ <&CP110_LABEL(clk) 1 18>;
+ clock-names = "mg_clk", "mg_core_clk", "axi_clk";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/driver-api/uio-howto.rst b/Documentation/driver-api/uio-howto.rst
index 8fecfa11d4ff..84091cd25dc4 100644
--- a/Documentation/driver-api/uio-howto.rst
+++ b/Documentation/driver-api/uio-howto.rst
@@ -408,6 +408,13 @@ handler code. You also do not need to know anything about the chip's
internal registers to create the kernel part of the driver. All you need
to know is the irq number of the pin the chip is connected to.
+When used in a device-tree enabled system, the driver needs to be
+probed with the ``"of_id"`` module parameter set to the ``"compatible"``
+string of the node the driver is supposed to handle. By default, the
+node's name (without the unit address) is exposed as name for the
+UIO device in userspace. To set a custom name, a property named
+``"linux,uio-name"`` may be specified in the DT node.
+
Using uio_dmem_genirq for platform devices
------------------------------------------
diff --git a/Documentation/fpga/dfl.rst b/Documentation/fpga/dfl.rst
index 2f125abd777f..6fa483fc823e 100644
--- a/Documentation/fpga/dfl.rst
+++ b/Documentation/fpga/dfl.rst
@@ -87,6 +87,8 @@ The following functions are exposed through ioctls:
- Get driver API version (DFL_FPGA_GET_API_VERSION)
- Check for extensions (DFL_FPGA_CHECK_EXTENSION)
- Program bitstream (DFL_FPGA_FME_PORT_PR)
+- Assign port to PF (DFL_FPGA_FME_PORT_ASSIGN)
+- Release port from PF (DFL_FPGA_FME_PORT_RELEASE)
More functions are exposed through sysfs
(/sys/class/fpga_region/regionX/dfl-fme.n/):
@@ -102,6 +104,10 @@ More functions are exposed through sysfs
one FPGA device may have more than one port, this sysfs interface indicates
how many ports the FPGA device has.
+ Global error reporting management (errors/)
+ error reporting sysfs interfaces allow user to read errors detected by the
+ hardware, and clear the logged errors.
+
FIU - PORT
==========
@@ -143,6 +149,10 @@ More functions are exposed through sysfs:
Read Accelerator GUID (afu_id)
afu_id indicates which PR bitstream is programmed to this AFU.
+ Error reporting (errors/)
+ error reporting sysfs interfaces allow user to read port/afu errors
+ detected by the hardware, and clear the logged errors.
+
DFL Framework Overview
======================
@@ -218,6 +228,101 @@ the compat_id exposed by the target FPGA region. This check is usually done by
userspace before calling the reconfiguration IOCTL.
+FPGA virtualization - PCIe SRIOV
+================================
+This section describes the virtualization support on DFL based FPGA device to
+enable accessing an accelerator from applications running in a virtual machine
+(VM). This section only describes the PCIe based FPGA device with SRIOV support.
+
+Features supported by the particular FPGA device are exposed through Device
+Feature Lists, as illustrated below:
+
+::
+
+ +-------------------------------+ +-------------+
+ | PF | | VF |
+ +-------------------------------+ +-------------+
+ ^ ^ ^ ^
+ | | | |
+ +-----|------------|---------|--------------|-------+
+ | | | | | |
+ | +-----+ +-------+ +-------+ +-------+ |
+ | | FME | | Port0 | | Port1 | | Port2 | |
+ | +-----+ +-------+ +-------+ +-------+ |
+ | ^ ^ ^ |
+ | | | | |
+ | +-------+ +------+ +-------+ |
+ | | AFU | | AFU | | AFU | |
+ | +-------+ +------+ +-------+ |
+ | |
+ | DFL based FPGA PCIe Device |
+ +---------------------------------------------------+
+
+FME is always accessed through the physical function (PF).
+
+Ports (and related AFUs) are accessed via PF by default, but could be exposed
+through virtual function (VF) devices via PCIe SRIOV. Each VF only contains
+1 Port and 1 AFU for isolation. Users could assign individual VFs (accelerators)
+created via PCIe SRIOV interface, to virtual machines.
+
+The driver organization in virtualization case is illustrated below:
+::
+
+ +-------++------++------+ |
+ | FME || FME || FME | |
+ | FPGA || FPGA || FPGA | |
+ |Manager||Bridge||Region| |
+ +-------++------++------+ |
+ +-----------------------+ +--------+ | +--------+
+ | FME | | AFU | | | AFU |
+ | Module | | Module | | | Module |
+ +-----------------------+ +--------+ | +--------+
+ +-----------------------+ | +-----------------------+
+ | FPGA Container Device | | | FPGA Container Device |
+ | (FPGA Base Region) | | | (FPGA Base Region) |
+ +-----------------------+ | +-----------------------+
+ +------------------+ | +------------------+
+ | FPGA PCIE Module | | Virtual | FPGA PCIE Module |
+ +------------------+ Host | Machine +------------------+
+ -------------------------------------- | ------------------------------
+ +---------------+ | +---------------+
+ | PCI PF Device | | | PCI VF Device |
+ +---------------+ | +---------------+
+
+FPGA PCIe device driver is always loaded first once a FPGA PCIe PF or VF device
+is detected. It:
+
+* Finishes enumeration on both FPGA PCIe PF and VF device using common
+ interfaces from DFL framework.
+* Supports SRIOV.
+
+The FME device driver plays a management role in this driver architecture, it
+provides ioctls to release Port from PF and assign Port to PF. After release
+a port from PF, then it's safe to expose this port through a VF via PCIe SRIOV
+sysfs interface.
+
+To enable accessing an accelerator from applications running in a VM, the
+respective AFU's port needs to be assigned to a VF using the following steps:
+
+#. The PF owns all AFU ports by default. Any port that needs to be
+ reassigned to a VF must first be released through the
+ DFL_FPGA_FME_PORT_RELEASE ioctl on the FME device.
+
+#. Once N ports are released from PF, then user can use command below
+ to enable SRIOV and VFs. Each VF owns only one Port with AFU.
+
+ ::
+
+ echo N > $PCI_DEVICE_PATH/sriov_numvfs
+
+#. Pass through the VFs to VMs
+
+#. The AFU under VF is accessible from applications in VM (using the
+ same driver inside the VF).
+
+Note that an FME can't be assigned to a VF, thus PR and other management
+functions are only available via the PF.
+
Device enumeration
==================
This section introduces how applications enumerate the fpga device from
diff --git a/Documentation/misc-devices/index.rst b/Documentation/misc-devices/index.rst
index a57f92dfe49a..f11c5daeada5 100644
--- a/Documentation/misc-devices/index.rst
+++ b/Documentation/misc-devices/index.rst
@@ -20,3 +20,4 @@ fit into other categories.
isl29003
lis3lv02d
max6875
+ xilinx_sdfec
diff --git a/MAINTAINERS b/MAINTAINERS
index 0262f99df61d..6e1b0ac2441b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8360,6 +8360,17 @@ F: drivers/platform/x86/intel_speed_select_if/
F: tools/power/x86/intel-speed-select/
F: include/uapi/linux/isst_if.h
+INTEL STRATIX10 FIRMWARE DRIVERS
+M: Richard Gong <richard.gong@linux.intel.com>
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: drivers/firmware/stratix10-rsu.c
+F: drivers/firmware/stratix10-svc.c
+F: include/linux/firmware/intel/stratix10-smc.h
+F: include/linux/firmware/intel/stratix10-svc-client.h
+F: Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
+F: Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
+
INTEL TELEMETRY DRIVER
M: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
M: "David E. Box" <david.e.box@linux.intel.com>
@@ -8411,6 +8422,7 @@ M: Alexander Shishkin <alexander.shishkin@linux.intel.com>
S: Supported
F: Documentation/trace/intel_th.rst
F: drivers/hwtracing/intel_th/
+F: include/linux/intel_th.h
INTEL(R) TRUSTED EXECUTION TECHNOLOGY (TXT)
M: Ning Sun <ning.sun@intel.com>
@@ -17760,6 +17772,17 @@ F: Documentation/devicetree/bindings/media/xilinx/
F: drivers/media/platform/xilinx/
F: include/uapi/linux/xilinx-v4l2-controls.h
+XILINX SD-FEC IP CORES
+M: Derek Kiernan <derek.kiernan@xilinx.com>
+M: Dragan Cvetic <dragan.cvetic@xilinx.com>
+S: Maintained
+F: Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt
+F: Documentation/misc-devices/xilinx_sdfec.rst
+F: drivers/misc/xilinx_sdfec.c
+F: drivers/misc/Kconfig
+F: drivers/misc/Makefile
+F: include/uapi/misc/xilinx_sdfec.h
+
XILLYBUS DRIVER
M: Eli Billauer <eli.billauer@gmail.com>
L: linux-kernel@vger.kernel.org
diff --git a/drivers/acpi/property.c b/drivers/acpi/property.c
index 2cb35d30cb14..3eacf474e1e3 100644
--- a/drivers/acpi/property.c
+++ b/drivers/acpi/property.c
@@ -39,6 +39,12 @@ static const guid_t prp_guids[] = {
/* External facing port GUID: efcc06cc-73ac-4bc3-bff0-76143807c389 */
GUID_INIT(0xefcc06cc, 0x73ac, 0x4bc3,
0xbf, 0xf0, 0x76, 0x14, 0x38, 0x07, 0xc3, 0x89),
+ /* Thunderbolt GUID for IMR_VALID: c44d002f-69f9-4e7d-a904-a7baabdf43f7 */
+ GUID_INIT(0xc44d002f, 0x69f9, 0x4e7d,
+ 0xa9, 0x04, 0xa7, 0xba, 0xab, 0xdf, 0x43, 0xf7),
+ /* Thunderbolt GUID for WAKE_SUPPORTED: 6c501103-c189-4296-ba72-9bf5a26ebe5d */
+ GUID_INIT(0x6c501103, 0xc189, 0x4296,
+ 0xba, 0x72, 0x9b, 0xf5, 0xa2, 0x6e, 0xbe, 0x5d),
};
/* ACPI _DSD data subnodes GUID: dbb8e3e6-5886-4ba6-8795-1319f52a966b */
diff --git a/drivers/android/binder.c b/drivers/android/binder.c
index dc1c83eafc22..c0a491277aca 100644
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -122,7 +122,7 @@ static uint32_t binder_debug_mask = BINDER_DEBUG_USER_ERROR |
BINDER_DEBUG_FAILED_TRANSACTION | BINDER_DEBUG_DEAD_TRANSACTION;
module_param_named(debug_mask, binder_debug_mask, uint, 0644);
-static char *binder_devices_param = CONFIG_ANDROID_BINDER_DEVICES;
+char *binder_devices_param = CONFIG_ANDROID_BINDER_DEVICES;
module_param_named(devices, binder_devices_param, charp, 0444);
static DECLARE_WAIT_QUEUE_HEAD(binder_user_error_wait);
@@ -196,30 +196,8 @@ static inline void binder_stats_created(enum binder_stat_types type)
atomic_inc(&binder_stats.obj_created[type]);
}
-struct binder_transaction_log_entry {
- int debug_id;
- int debug_id_done;
- int call_type;
- int from_proc;
- int from_thread;
- int target_handle;
- int to_proc;
- int to_thread;
- int to_node;
- int data_size;
- int offsets_size;
- int return_error_line;
- uint32_t return_error;
- uint32_t return_error_param;
- const char *context_name;
-};
-struct binder_transaction_log {
- atomic_t cur;
- bool full;
- struct binder_transaction_log_entry entry[32];
-};
-static struct binder_transaction_log binder_transaction_log;
-static struct binder_transaction_log binder_transaction_log_failed;
+struct binder_transaction_log binder_transaction_log;
+struct binder_transaction_log binder_transaction_log_failed;
static struct binder_transaction_log_entry *binder_transaction_log_add(
struct binder_transaction_log *log)
@@ -480,6 +458,7 @@ enum binder_deferred_state {
* @inner_lock: can nest under outer_lock and/or node lock
* @outer_lock: no nesting under innor or node lock
* Lock order: 1) outer, 2) node, 3) inner
+ * @binderfs_entry: process-specific binderfs log file
*
* Bookkeeping structure for binder processes
*/
@@ -509,6 +488,7 @@ struct binder_proc {
struct binder_context *context;
spinlock_t inner_lock;
spinlock_t outer_lock;
+ struct dentry *binderfs_entry;
};
enum {
@@ -5230,6 +5210,8 @@ static int binder_open(struct inode *nodp, struct file *filp)
{
struct binder_proc *proc;
struct binder_device *binder_dev;
+ struct binderfs_info *info;
+ struct dentry *binder_binderfs_dir_entry_proc = NULL;
binder_debug(BINDER_DEBUG_OPEN_CLOSE, "%s: %d:%d\n", __func__,
current->group_leader->pid, current->pid);
@@ -5244,11 +5226,14 @@ static int binder_open(struct inode *nodp, struct file *filp)
INIT_LIST_HEAD(&proc->todo);
proc->default_priority = task_nice(current);
/* binderfs stashes devices in i_private */
- if (is_binderfs_device(nodp))
+ if (is_binderfs_device(nodp)) {
binder_dev = nodp->i_private;
- else
+ info = nodp->i_sb->s_fs_info;
+ binder_binderfs_dir_entry_proc = info->proc_log_dir;
+ } else {
binder_dev = container_of(filp->private_data,
struct binder_device, miscdev);
+ }
proc->context = &binder_dev->context;
binder_alloc_init(&proc->alloc);
@@ -5279,6 +5264,35 @@ static int binder_open(struct inode *nodp, struct file *filp)
&proc_fops);
}
+ if (binder_binderfs_dir_entry_proc) {
+ char strbuf[11];
+ struct dentry *binderfs_entry;
+
+ snprintf(strbuf, sizeof(strbuf), "%u", proc->pid);
+ /*
+ * Similar to debugfs, the process specific log file is shared
+ * between contexts. If the file has already been created for a
+ * process, the following binderfs_create_file() call will
+ * fail with error code EEXIST if another context of the same
+ * process invoked binder_open(). This is ok since same as
+ * debugfs, the log file will contain information on all
+ * contexts of a given PID.
+ */
+ binderfs_entry = binderfs_create_file(binder_binderfs_dir_entry_proc,
+ strbuf, &proc_fops, (void *)(unsigned long)proc->pid);
+ if (!IS_ERR(binderfs_entry)) {
+ proc->binderfs_entry = binderfs_entry;
+ } else {
+ int error;
+
+ error = PTR_ERR(binderfs_entry);
+ if (error != -EEXIST) {
+ pr_warn("Unable to create file %s in binderfs (error %d)\n",
+ strbuf, error);
+ }
+ }
+ }
+
return 0;
}
@@ -5318,6 +5332,12 @@ static int binder_release(struct inode *nodp, struct file *filp)
struct binder_proc *proc = filp->private_data;
debugfs_remove(proc->debugfs_entry);
+
+ if (proc->binderfs_entry) {
+ binderfs_remove_file(proc->binderfs_entry);
+ proc->binderfs_entry = NULL;
+ }
+
binder_defer_work(proc, BINDER_DEFERRED_RELEASE);
return 0;
@@ -5907,7 +5927,7 @@ static void print_binder_proc_stats(struct seq_file *m,
}
-static int state_show(struct seq_file *m, void *unused)
+int binder_state_show(struct seq_file *m, void *unused)
{
struct binder_proc *proc;
struct binder_node *node;
@@ -5946,7 +5966,7 @@ static int state_show(struct seq_file *m, void *unused)
return 0;
}
-static int stats_show(struct seq_file *m, void *unused)
+int binder_stats_show(struct seq_file *m, void *unused)
{
struct binder_proc *proc;
@@ -5962,7 +5982,7 @@ static int stats_show(struct seq_file *m, void *unused)
return 0;
}
-static int transactions_show(struct seq_file *m, void *unused)
+int binder_transactions_show(struct seq_file *m, void *unused)
{
struct binder_proc *proc;
@@ -6018,7 +6038,7 @@ static void print_binder_transaction_log_entry(struct seq_file *m,
"\n" : " (incomplete)\n");
}
-static int transaction_log_show(struct seq_file *m, void *unused)
+int binder_transaction_log_show(struct seq_file *m, void *unused)
{
struct binder_transaction_log *log = m->private;
unsigned int log_cur = atomic_read(&log->cur);
@@ -6050,11 +6070,6 @@ const struct file_operations binder_fops = {
.release = binder_release,
};
-DEFINE_SHOW_ATTRIBUTE(state);
-DEFINE_SHOW_ATTRIBUTE(stats);
-DEFINE_SHOW_ATTRIBUTE(transactions);
-DEFINE_SHOW_ATTRIBUTE(transaction_log);
-
static int __init init_binder_device(const char *name)
{
int ret;
@@ -6108,30 +6123,31 @@ static int __init binder_init(void)
0444,
binder_debugfs_dir_entry_root,
NULL,
- &state_fops);
+ &binder_state_fops);
debugfs_create_file("stats",
0444,
binder_debugfs_dir_entry_root,
NULL,
- &stats_fops);
+ &binder_stats_fops);
debugfs_create_file("transactions",
0444,
binder_debugfs_dir_entry_root,
NULL,
- &transactions_fops);
+ &binder_transactions_fops);
debugfs_create_file("transaction_log",
0444,
binder_debugfs_dir_entry_root,
&binder_transaction_log,
- &transaction_log_fops);
+ &binder_transaction_log_fops);
debugfs_create_file("failed_transaction_log",
0444,
binder_debugfs_dir_entry_root,
&binder_transaction_log_failed,
- &transaction_log_fops);
+ &binder_transaction_log_fops);
}
- if (strcmp(binder_devices_param, "") != 0) {
+ if (!IS_ENABLED(CONFIG_ANDROID_BINDERFS) &&
+ strcmp(binder_devices_param, "") != 0) {
/*
* Copy the module_parameter string, because we don't want to
* tokenize it in-place.
diff --git a/drivers/android/binder_internal.h b/drivers/android/binder_internal.h
index 045b3e42d98b..bd47f7f72075 100644
--- a/drivers/android/binder_internal.h
+++ b/drivers/android/binder_internal.h
@@ -35,15 +35,63 @@ struct binder_device {
struct inode *binderfs_inode;
};
+/**
+ * binderfs_mount_opts - mount options for binderfs
+ * @max: maximum number of allocatable binderfs binder devices
+ * @stats_mode: enable binder stats in binderfs.
+ */
+struct binderfs_mount_opts {
+ int max;
+ int stats_mode;
+};
+
+/**
+ * binderfs_info - information about a binderfs mount
+ * @ipc_ns: The ipc namespace the binderfs mount belongs to.
+ * @control_dentry: This records the dentry of this binderfs mount
+ * binder-control device.
+ * @root_uid: uid that needs to be used when a new binder device is
+ * created.
+ * @root_gid: gid that needs to be used when a new binder device is
+ * created.
+ * @mount_opts: The mount options in use.
+ * @device_count: The current number of allocated binder devices.
+ * @proc_log_dir: Pointer to the directory dentry containing process-specific
+ * logs.
+ */
+struct binderfs_info {
+ struct ipc_namespace *ipc_ns;
+ struct dentry *control_dentry;
+ kuid_t root_uid;
+ kgid_t root_gid;
+ struct binderfs_mount_opts mount_opts;
+ int device_count;
+ struct dentry *proc_log_dir;
+};
+
extern const struct file_operations binder_fops;
+extern char *binder_devices_param;
+
#ifdef CONFIG_ANDROID_BINDERFS
extern bool is_binderfs_device(const struct inode *inode);
+extern struct dentry *binderfs_create_file(struct dentry *dir, const char *name,
+ const struct file_operations *fops,
+ void *data);
+extern void binderfs_remove_file(struct dentry *dentry);
#else
static inline bool is_binderfs_device(const struct inode *inode)
{
return false;
}
+static inline struct dentry *binderfs_create_file(struct dentry *dir,
+ const char *name,
+ const struct file_operations *fops,
+ void *data)
+{
+ return NULL;
+}
+static inline void binderfs_remove_file(struct dentry *dentry) {}
#endif
#ifdef CONFIG_ANDROID_BINDERFS
@@ -55,4 +103,42 @@ static inline int __init init_binderfs(void)
}
#endif
+int binder_stats_show(struct seq_file *m, void *unused);
+DEFINE_SHOW_ATTRIBUTE(binder_stats);
+
+int binder_state_show(struct seq_file *m, void *unused);
+DEFINE_SHOW_ATTRIBUTE(binder_state);
+
+int binder_transactions_show(struct seq_file *m, void *unused);
+DEFINE_SHOW_ATTRIBUTE(binder_transactions);
+
+int binder_transaction_log_show(struct seq_file *m, void *unused);
+DEFINE_SHOW_ATTRIBUTE(binder_transaction_log);
+
+struct binder_transaction_log_entry {
+ int debug_id;
+ int debug_id_done;
+ int call_type;
+ int from_proc;
+ int from_thread;
+ int target_handle;
+ int to_proc;
+ int to_thread;
+ int to_node;
+ int data_size;
+ int offsets_size;
+ int return_error_line;
+ uint32_t return_error;
+ uint32_t return_error_param;
+ const char *context_name;
+};
+
+struct binder_transaction_log {
+ atomic_t cur;
+ bool full;
+ struct binder_transaction_log_entry entry[32];
+};
+
+extern struct binder_transaction_log binder_transaction_log;
+extern struct binder_transaction_log binder_transaction_log_failed;
#endif /* _LINUX_BINDER_INTERNAL_H */
diff --git a/drivers/android/binderfs.c b/drivers/android/binderfs.c
index e773f45d19d9..e2580e5316a2 100644
--- a/drivers/android/binderfs.c
+++ b/drivers/android/binderfs.c
@@ -48,45 +48,23 @@ static dev_t binderfs_dev;
static DEFINE_MUTEX(binderfs_minors_mutex);
static DEFINE_IDA(binderfs_minors);
-/**
- * binderfs_mount_opts - mount options for binderfs
- * @max: maximum number of allocatable binderfs binder devices
- */
-struct binderfs_mount_opts {
- int max;
-};
-
enum {
Opt_max,
+ Opt_stats_mode,
Opt_err
};
+enum binderfs_stats_mode {
+ STATS_NONE,
+ STATS_GLOBAL,
+};
+
static const match_table_t tokens = {
{ Opt_max, "max=%d" },
+ { Opt_stats_mode, "stats=%s" },
{ Opt_err, NULL }
};
-/**
- * binderfs_info - information about a binderfs mount
- * @ipc_ns: The ipc namespace the binderfs mount belongs to.
- * @control_dentry: This records the dentry of this binderfs mount
- * binder-control device.
- * @root_uid: uid that needs to be used when a new binder device is
- * created.
- * @root_gid: gid that needs to be used when a new binder device is
- * created.
- * @mount_opts: The mount options in use.
- * @device_count: The current number of allocated binder devices.
- */
-struct binderfs_info {
- struct ipc_namespace *ipc_ns;
- struct dentry *control_dentry;
- kuid_t root_uid;
- kgid_t root_gid;
- struct binderfs_mount_opts mount_opts;
- int device_count;
-};
-
static inline struct binderfs_info *BINDERFS_I(const struct inode *inode)
{
return inode->i_sb->s_fs_info;
@@ -186,8 +164,7 @@ static int binderfs_binder_device_create(struct inode *ref_inode,
req->major = MAJOR(binderfs_dev);
req->minor = minor;
- ret = copy_to_user(userp, req, sizeof(*req));
- if (ret) {
+ if (userp && copy_to_user(userp, req, sizeof(*req))) {
ret = -EFAULT;
goto err;
}
@@ -272,7 +249,7 @@ static void binderfs_evict_inode(struct inode *inode)
clear_inode(inode);
- if (!device)
+ if (!S_ISCHR(inode->i_mode) || !device)
return;
mutex_lock(&binderfs_minors_mutex);
@@ -291,8 +268,9 @@ static void binderfs_evict_inode(struct inode *inode)
static int binderfs_parse_mount_opts(char *data,
struct binderfs_mount_opts *opts)
{
- char *p;
+ char *p, *stats;
opts->max = BINDERFS_MAX_MINOR;
+ opts->stats_mode = STATS_NONE;
while ((p = strsep(&data, ",")) != NULL) {
substring_t args[MAX_OPT_ARGS];
@@ -312,6 +290,22 @@ static int binderfs_parse_mount_opts(char *data,
opts->max = max_devices;
break;
+ case Opt_stats_mode:
+ if (!capable(CAP_SYS_ADMIN))
+ return -EINVAL;
+
+ stats = match_strdup(&args[0]);
+ if (!stats)
+ return -ENOMEM;
+
+ if (strcmp(stats, "global") != 0) {
+ kfree(stats);
+ return -EINVAL;
+ }
+
+ opts->stats_mode = STATS_GLOBAL;
+ kfree(stats);
+ break;
default:
pr_err("Invalid mount options\n");
return -EINVAL;
@@ -323,8 +317,21 @@ static int binderfs_parse_mount_opts(char *data,
static int binderfs_remount(struct super_block *sb, int *flags, char *data)
{
+ int prev_stats_mode, ret;
struct binderfs_info *info = sb->s_fs_info;
- return binderfs_parse_mount_opts(data, &info->mount_opts);
+
+ prev_stats_mode = info->mount_opts.stats_mode;
+ ret = binderfs_parse_mount_opts(data, &info->mount_opts);
+ if (ret)
+ return ret;
+
+ if (prev_stats_mode != info->mount_opts.stats_mode) {
+ pr_err("Binderfs stats mode cannot be changed during a remount\n");
+ info->mount_opts.stats_mode = prev_stats_mode;
+ return -EINVAL;
+ }
+
+ return 0;
}
static int binderfs_show_mount_opts(struct seq_file *seq, struct dentry *root)
@@ -334,6 +341,8 @@ static int binderfs_show_mount_opts(struct seq_file *seq, struct dentry *root)
info = root->d_sb->s_fs_info;
if (info->mount_opts.max <= BINDERFS_MAX_MINOR)
seq_printf(seq, ",max=%d", info->mount_opts.max);
+ if (info->mount_opts.stats_mode == STATS_GLOBAL)
+ seq_printf(seq, ",stats=global");
return 0;
}
@@ -462,11 +471,192 @@ static const struct inode_operations binderfs_dir_inode_operations = {
.unlink = binderfs_unlink,
};
+static struct inode *binderfs_make_inode(struct super_block *sb, int mode)
+{
+ struct inode *ret;
+
+ ret = new_inode(sb);
+ if (ret) {
+ ret->i_ino = iunique(sb, BINDERFS_MAX_MINOR + INODE_OFFSET);
+ ret->i_mode = mode;
+ ret->i_atime = ret->i_mtime = ret->i_ctime = current_time(ret);
+ }
+ return ret;
+}
+
+static struct dentry *binderfs_create_dentry(struct dentry *parent,
+ const char *name)
+{
+ struct dentry *dentry;
+
+ dentry = lookup_one_len(name, parent, strlen(name));
+ if (IS_ERR(dentry))
+ return dentry;
+
+ /* Return error if the file/dir already exists. */
+ if (d_really_is_positive(dentry)) {
+ dput(dentry);
+ return ERR_PTR(-EEXIST);
+ }
+
+ return dentry;
+}
+
+void binderfs_remove_file(struct dentry *dentry)
+{
+ struct inode *parent_inode;
+
+ parent_inode = d_inode(dentry->d_parent);
+ inode_lock(parent_inode);
+ if (simple_positive(dentry)) {
+ dget(dentry);
+ simple_unlink(parent_inode, dentry);
+ d_delete(dentry);
+ dput(dentry);
+ }
+ inode_unlock(parent_inode);
+}
+
+struct dentry *binderfs_create_file(struct dentry *parent, const char *name,
+ const struct file_operations *fops,
+ void *data)
+{
+ struct dentry *dentry;
+ struct inode *new_inode, *parent_inode;
+ struct super_block *sb;
+
+ parent_inode = d_inode(parent);
+ inode_lock(parent_inode);
+
+ dentry = binderfs_create_dentry(parent, name);
+ if (IS_ERR(dentry))
+ goto out;
+
+ sb = parent_inode->i_sb;
+ new_inode = binderfs_make_inode(sb, S_IFREG | 0444);
+ if (!new_inode) {
+ dput(dentry);
+ dentry = ERR_PTR(-ENOMEM);
+ goto out;
+ }
+
+ new_inode->i_fop = fops;
+ new_inode->i_private = data;
+ d_instantiate(dentry, new_inode);
+ fsnotify_create(parent_inode, dentry);
+
+out:
+ inode_unlock(parent_inode);
+ return dentry;
+}
+
+static struct dentry *binderfs_create_dir(struct dentry *parent,
+ const char *name)
+{
+ struct dentry *dentry;
+ struct inode *new_inode, *parent_inode;
+ struct super_block *sb;
+
+ parent_inode = d_inode(parent);
+ inode_lock(parent_inode);
+
+ dentry = binderfs_create_dentry(parent, name);
+ if (IS_ERR(dentry))
+ goto out;
+
+ sb = parent_inode->i_sb;
+ new_inode = binderfs_make_inode(sb, S_IFDIR | 0755);
+ if (!new_inode) {
+ dput(dentry);
+ dentry = ERR_PTR(-ENOMEM);
+ goto out;
+ }
+
+ new_inode->i_fop = &simple_dir_operations;
+ new_inode->i_op = &simple_dir_inode_operations;
+
+ set_nlink(new_inode, 2);
+ d_instantiate(dentry, new_inode);
+ inc_nlink(parent_inode);
+ fsnotify_mkdir(parent_inode, dentry);
+
+out:
+ inode_unlock(parent_inode);
+ return dentry;
+}
+
+static int init_binder_logs(struct super_block *sb)
+{
+ struct dentry *binder_logs_root_dir, *dentry, *proc_log_dir;
+ struct binderfs_info *info;
+ int ret = 0;
+
+ binder_logs_root_dir = binderfs_create_dir(sb->s_root,
+ "binder_logs");
+ if (IS_ERR(binder_logs_root_dir)) {
+ ret = PTR_ERR(binder_logs_root_dir);
+ goto out;
+ }
+
+ dentry = binderfs_create_file(binder_logs_root_dir, "stats",
+ &binder_stats_fops, NULL);
+ if (IS_ERR(dentry)) {
+ ret = PTR_ERR(dentry);
+ goto out;
+ }
+
+ dentry = binderfs_create_file(binder_logs_root_dir, "state",
+ &binder_state_fops, NULL);
+ if (IS_ERR(dentry)) {
+ ret = PTR_ERR(dentry);
+ goto out;
+ }
+
+ dentry = binderfs_create_file(binder_logs_root_dir, "transactions",
+ &binder_transactions_fops, NULL);
+ if (IS_ERR(dentry)) {
+ ret = PTR_ERR(dentry);
+ goto out;
+ }
+
+ dentry = binderfs_create_file(binder_logs_root_dir,
+ "transaction_log",
+ &binder_transaction_log_fops,
+ &binder_transaction_log);
+ if (IS_ERR(dentry)) {
+ ret = PTR_ERR(dentry);
+ goto out;
+ }
+
+ dentry = binderfs_create_file(binder_logs_root_dir,
+ "failed_transaction_log",
+ &binder_transaction_log_fops,
+ &binder_transaction_log_failed);
+ if (IS_ERR(dentry)) {
+ ret = PTR_ERR(dentry);
+ goto out;
+ }
+
+ proc_log_dir = binderfs_create_dir(binder_logs_root_dir, "proc");
+ if (IS_ERR(proc_log_dir)) {
+ ret = PTR_ERR(proc_log_dir);
+ goto out;
+ }
+ info = sb->s_fs_info;
+ info->proc_log_dir = proc_log_dir;
+
+out:
+ return ret;
+}
+
static int binderfs_fill_super(struct super_block *sb, void *data, int silent)
{
int ret;
struct binderfs_info *info;
struct inode *inode = NULL;
+ struct binderfs_device device_info = { 0 };
+ const char *name;
+ size_t len;
sb->s_blocksize = PAGE_SIZE;
sb->s_blocksize_bits = PAGE_SHIFT;
@@ -521,7 +711,25 @@ static int binderfs_fill_super(struct super_block *sb, void *data, int silent)
if (!sb->s_root)
return -ENOMEM;
- return binderfs_binder_ctl_create(sb);
+ ret = binderfs_binder_ctl_create(sb);
+ if (ret)
+ return ret;
+
+ name = binder_devices_param;
+ for (len = strcspn(name, ","); len > 0; len = strcspn(name, ",")) {
+ strscpy(device_info.name, name, len + 1);
+ ret = binderfs_binder_device_create(inode, NULL, &device_info);
+ if (ret)
+ return ret;
+ name += len;
+ if (*name == ',')
+ name++;
+ }
+
+ if (info->mount_opts.stats_mode == STATS_GLOBAL)
+ return init_binder_logs(sb);
+
+ return 0;
}
static struct dentry *binderfs_mount(struct file_system_type *fs_type,
@@ -553,6 +761,18 @@ static struct file_system_type binder_fs_type = {
int __init init_binderfs(void)
{
int ret;
+ const char *name;
+ size_t len;
+
+ /* Verify that the default binderfs device names are valid. */
+ name = binder_devices_param;
+ for (len = strcspn(name, ","); len > 0; len = strcspn(name, ",")) {
+ if (len > BINDERFS_MAX_NAME)
+ return -E2BIG;
+ name += len;
+ if (*name == ',')
+ name++;
+ }
/* Allocate new major number for binderfs. */
ret = alloc_chrdev_region(&binderfs_dev, 0, BINDERFS_MAX_MINOR,
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index b08dc50f9f26..9eb564c002f6 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -97,6 +97,13 @@ void __weak unxlate_dev_mem_ptr(phys_addr_t phys, void *addr)
}
#endif
+static inline bool should_stop_iteration(void)
+{
+ if (need_resched())
+ cond_resched();
+ return fatal_signal_pending(current);
+}
+
/*
* This funcion reads the *physical* memory. The f_pos points directly to the
* memory location.
@@ -175,6 +182,8 @@ static ssize_t read_mem(struct file *file, char __user *buf,
p += sz;
count -= sz;
read += sz;
+ if (should_stop_iteration())
+ break;
}
kfree(bounce);
@@ -251,6 +260,8 @@ static ssize_t write_mem(struct file *file, const char __user *buf,
p += sz;
count -= sz;
written += sz;
+ if (should_stop_iteration())
+ break;
}
*ppos += written;
@@ -468,6 +479,10 @@ static ssize_t read_kmem(struct file *file, char __user *buf,
read += sz;
low_count -= sz;
count -= sz;
+ if (should_stop_iteration()) {
+ count = 0;
+ break;
+ }
}
}
@@ -492,6 +507,8 @@ static ssize_t read_kmem(struct file *file, char __user *buf,
buf += sz;
read += sz;
p += sz;
+ if (should_stop_iteration())
+ break;
}
free_page((unsigned long)kbuf);
}
@@ -544,6 +561,8 @@ static ssize_t do_write_kmem(unsigned long p, const char __user *buf,
p += sz;
count -= sz;
written += sz;
+ if (should_stop_iteration())
+ break;
}
*ppos += written;
@@ -595,6 +614,8 @@ static ssize_t write_kmem(struct file *file, const char __user *buf,
buf += sz;
virtr += sz;
p += sz;
+ if (should_stop_iteration())
+ break;
}
free_page((unsigned long)kbuf);
}
diff --git a/drivers/char/ppdev.c b/drivers/char/ppdev.c
index f0a8adca1eee..c86f18aa8985 100644
--- a/drivers/char/ppdev.c
+++ b/drivers/char/ppdev.c
@@ -737,7 +737,7 @@ static int pp_release(struct inode *inode, struct file *file)
"negotiated back to compatibility mode because user-space forgot\n");
}
- if (pp->flags & PP_CLAIMED) {
+ if ((pp->flags & PP_CLAIMED) && pp->pdev) {
struct ieee1284_info *info;
info = &pp->pdev->port->ieee1284;
diff --git a/drivers/char/toshiba.c b/drivers/char/toshiba.c
index 0bdc602f0d48..98f3150e0048 100644
--- a/drivers/char/toshiba.c
+++ b/drivers/char/toshiba.c
@@ -373,7 +373,7 @@ static int tosh_get_machine_id(void __iomem *bios)
value. This has been verified on a Satellite Pro 430CDT,
Tecra 750CDT, Tecra 780DVD and Satellite 310CDT. */
#if TOSH_DEBUG
- printk("toshiba: debugging ID ebx=0x%04x\n", regs.ebx);
+ pr_debug("toshiba: debugging ID ebx=0x%04x\n", regs.ebx);
#endif
bx = 0xe6f5;
@@ -417,7 +417,7 @@ static int tosh_probe(void)
for (i=0;i<7;i++) {
if (readb(bios+0xe010+i)!=signature[i]) {
- printk("toshiba: not a supported Toshiba laptop\n");
+ pr_err("toshiba: not a supported Toshiba laptop\n");
iounmap(bios);
return -ENODEV;
}
@@ -433,7 +433,7 @@ static int tosh_probe(void)
/* if this is not a Toshiba laptop carry flag is set and ah=0x86 */
if ((flag==1) || ((regs.eax & 0xff00)==0x8600)) {
- printk("toshiba: not a supported Toshiba laptop\n");
+ pr_err("toshiba: not a supported Toshiba laptop\n");
iounmap(bios);
return -ENODEV;
}
@@ -486,7 +486,7 @@ static int __init toshiba_init(void)
if (tosh_probe())
return -ENODEV;
- printk(KERN_INFO "Toshiba System Management Mode driver v" TOSH_VERSION "\n");
+ pr_info("Toshiba System Management Mode driver v" TOSH_VERSION "\n");
/* set the port to use for Fn status if not specified as a parameter */
if (tosh_fn==0x00)
diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
index c3fd632af119..a32bfaeb7e61 100644
--- a/drivers/clk/qcom/clk-rpmh.c
+++ b/drivers/clk/qcom/clk-rpmh.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
*/
#include <linux/clk-provider.h>
@@ -12,23 +12,13 @@
#include <linux/platform_device.h>
#include <soc/qcom/cmd-db.h>
#include <soc/qcom/rpmh.h>
+#include <soc/qcom/tcs.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#define CLK_RPMH_ARC_EN_OFFSET 0
#define CLK_RPMH_VRM_EN_OFFSET 4
-#define BCM_TCS_CMD_COMMIT_MASK 0x40000000
-#define BCM_TCS_CMD_VALID_SHIFT 29
-#define BCM_TCS_CMD_VOTE_MASK 0x3fff
-#define BCM_TCS_CMD_VOTE_SHIFT 0
-
-#define BCM_TCS_CMD(valid, vote) \
- (BCM_TCS_CMD_COMMIT_MASK | \
- ((valid) << BCM_TCS_CMD_VALID_SHIFT) | \
- ((vote & BCM_TCS_CMD_VOTE_MASK) \
- << BCM_TCS_CMD_VOTE_SHIFT))
-
/**
* struct bcm_db - Auxiliary data pertaining to each Bus Clock Manager(BCM)
* @unit: divisor used to convert Hz value to an RPMh msg
@@ -269,7 +259,7 @@ static int clk_rpmh_bcm_send_cmd(struct clk_rpmh *c, bool enable)
}
cmd.addr = c->res_addr;
- cmd.data = BCM_TCS_CMD(enable, cmd_state);
+ cmd.data = BCM_TCS_CMD(1, enable, 0, cmd_state);
ret = rpmh_write_async(c->dev, RPMH_ACTIVE_ONLY_STATE, &cmd, 1);
if (ret) {
diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c
index ee9b5f70bfa4..ad02dc6747a4 100644
--- a/drivers/extcon/extcon-adc-jack.c
+++ b/drivers/extcon/extcon-adc-jack.c
@@ -140,10 +140,8 @@ static int adc_jack_probe(struct platform_device *pdev)
return err;
data->irq = platform_get_irq(pdev, 0);
- if (data->irq < 0) {
- dev_err(&pdev->dev, "platform_get_irq failed\n");
+ if (data->irq < 0)
return -ENODEV;
- }
err = request_any_context_irq(data->irq, adc_jack_irq_thread,
pdata->irq_flags, pdata->name, data);
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 7e9f4c9ee87d..e970134c95fa 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -1253,7 +1253,7 @@ static int arizona_extcon_get_micd_configs(struct device *dev,
int i, j;
u32 *vals;
- nconfs = device_property_read_u32_array(arizona->dev, prop, NULL, 0);
+ nconfs = device_property_count_u32(arizona->dev, prop);
if (nconfs <= 0)
return 0;
diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
index 7254852e6ec0..415afaf479e7 100644
--- a/drivers/extcon/extcon-axp288.c
+++ b/drivers/extcon/extcon-axp288.c
@@ -121,7 +121,6 @@ static const char * const axp288_pwr_up_down_info[] = {
"Last shutdown caused by PMIC UVLO threshold",
"Last shutdown caused by SOC initiated cold off",
"Last shutdown caused by user pressing the power button",
- NULL,
};
/*
@@ -130,18 +129,21 @@ static const char * const axp288_pwr_up_down_info[] = {
*/
static void axp288_extcon_log_rsi(struct axp288_extcon_info *info)
{
- const char * const *rsi;
unsigned int val, i, clear_mask = 0;
+ unsigned long bits;
int ret;
ret = regmap_read(info->regmap, AXP288_PS_BOOT_REASON_REG, &val);
- for (i = 0, rsi = axp288_pwr_up_down_info; *rsi; rsi++, i++) {
- if (val & BIT(i)) {
- dev_dbg(info->dev, "%s\n", *rsi);
- clear_mask |= BIT(i);
- }
+ if (ret < 0) {
+ dev_err(info->dev, "failed to read reset source indicator\n");
+ return;
}
+ bits = val & GENMASK(ARRAY_SIZE(axp288_pwr_up_down_info) - 1, 0);
+ for_each_set_bit(i, &bits, ARRAY_SIZE(axp288_pwr_up_down_info))
+ dev_dbg(info->dev, "%s\n", axp288_pwr_up_down_info[i]);
+ clear_mask = bits;
+
/* Clear the register value for next reboot (write 1 to clear bit) */
regmap_write(info->regmap, AXP288_PS_BOOT_REASON_REG, clear_mask);
}
diff --git a/drivers/extcon/extcon-fsa9480.c b/drivers/extcon/extcon-fsa9480.c
index 350fb34abfa0..8405512f5199 100644
--- a/drivers/extcon/extcon-fsa9480.c
+++ b/drivers/extcon/extcon-fsa9480.c
@@ -363,6 +363,7 @@ MODULE_DEVICE_TABLE(i2c, fsa9480_id);
static const struct of_device_id fsa9480_of_match[] = {
{ .compatible = "fcs,fsa9480", },
+ { .compatible = "fcs,fsa880", },
{ },
};
MODULE_DEVICE_TABLE(of, fsa9480_of_match);
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index faddeac948db..c211222f5d0c 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -22,26 +22,22 @@
/**
* struct gpio_extcon_data - A simple GPIO-controlled extcon device state container.
* @edev: Extcon device.
- * @irq: Interrupt line for the external connector.
* @work: Work fired by the interrupt.
* @debounce_jiffies: Number of jiffies to wait for the GPIO to stabilize, from the debounce
* value.
* @gpiod: GPIO descriptor for this external connector.
* @extcon_id: The unique id of specific external connector.
* @debounce: Debounce time for GPIO IRQ in ms.
- * @irq_flags: IRQ Flags (e.g., IRQF_TRIGGER_LOW).
* @check_on_resume: Boolean describing whether to check the state of gpio
* while resuming from sleep.
*/
struct gpio_extcon_data {
struct extcon_dev *edev;
- int irq;
struct delayed_work work;
unsigned long debounce_jiffies;
struct gpio_desc *gpiod;
unsigned int extcon_id;
unsigned long debounce;
- unsigned long irq_flags;
bool check_on_resume;
};
@@ -69,6 +65,8 @@ static int gpio_extcon_probe(struct platform_device *pdev)
{
struct gpio_extcon_data *data;
struct device *dev = &pdev->dev;
+ unsigned long irq_flags;
+ int irq;
int ret;
data = devm_kzalloc(dev, sizeof(struct gpio_extcon_data), GFP_KERNEL);
@@ -82,15 +80,26 @@ static int gpio_extcon_probe(struct platform_device *pdev)
* developed to get the extcon id from device-tree or others.
* On later, it have to be solved.
*/
- if (!data->irq_flags || data->extcon_id > EXTCON_NONE)
+ if (data->extcon_id > EXTCON_NONE)
return -EINVAL;
data->gpiod = devm_gpiod_get(dev, "extcon", GPIOD_IN);
if (IS_ERR(data->gpiod))
return PTR_ERR(data->gpiod);
- data->irq = gpiod_to_irq(data->gpiod);
- if (data->irq <= 0)
- return data->irq;
+ irq = gpiod_to_irq(data->gpiod);
+ if (irq <= 0)
+ return irq;
+
+ /*
+ * It is unlikely that this is an acknowledged interrupt that goes
+ * away after handling, what we are looking for are falling edges
+ * if the signal is active low, and rising edges if the signal is
+ * active high.
+ */
+ if (gpiod_is_active_low(data->gpiod))
+ irq_flags = IRQF_TRIGGER_FALLING;
+ else
+ irq_flags = IRQF_TRIGGER_RISING;
/* Allocate the memory of extcon devie and register extcon device */
data->edev = devm_extcon_dev_allocate(dev, &data->extcon_id);
@@ -109,8 +118,8 @@ static int gpio_extcon_probe(struct platform_device *pdev)
* Request the interrupt of gpio to detect whether external connector
* is attached or detached.
*/
- ret = devm_request_any_context_irq(dev, data->irq,
- gpio_irq_handler, data->irq_flags,
+ ret = devm_request_any_context_irq(dev, irq,
+ gpio_irq_handler, irq_flags,
pdev->name, data);
if (ret < 0)
return ret;
diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c
index a343a6ef3506..e6b50ca83008 100644
--- a/drivers/extcon/extcon-max77843.c
+++ b/drivers/extcon/extcon-max77843.c
@@ -774,12 +774,12 @@ static int max77843_init_muic_regmap(struct max77693_dev *max77843)
{
int ret;
- max77843->i2c_muic = i2c_new_dummy(max77843->i2c->adapter,
+ max77843->i2c_muic = i2c_new_dummy_device(max77843->i2c->adapter,
I2C_ADDR_MUIC);
- if (!max77843->i2c_muic) {
+ if (IS_ERR(max77843->i2c_muic)) {
dev_err(&max77843->i2c->dev,
"Cannot allocate I2C device for MUIC\n");
- return -ENOMEM;
+ return PTR_ERR(max77843->i2c_muic);
}
i2c_set_clientdata(max77843->i2c_muic, max77843);
diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c
index 98e4f616b8f1..dc43847ad2b0 100644
--- a/drivers/extcon/extcon-sm5502.c
+++ b/drivers/extcon/extcon-sm5502.c
@@ -597,7 +597,7 @@ static int sm5022_muic_i2c_probe(struct i2c_client *i2c,
ret = devm_request_threaded_irq(info->dev, virq, NULL,
sm5502_muic_irq_handler,
- IRQF_NO_SUSPEND,
+ IRQF_NO_SUSPEND | IRQF_ONESHOT,
muic_irq->name, info);
if (ret) {
dev_err(info->dev,
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index c9a827bffe1c..e40a77bfe821 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -216,6 +216,24 @@ config INTEL_STRATIX10_SERVICE
Say Y here if you want Stratix10 service layer support.
+config INTEL_STRATIX10_RSU
+ tristate "Intel Stratix10 Remote System Update"
+ depends on INTEL_STRATIX10_SERVICE
+ help
+ The Intel Remote System Update (RSU) driver exposes interfaces
+ access through the Intel Service Layer to user space via sysfs
+ device attribute nodes. The RSU interfaces report/control some of
+ the optional RSU features of the Stratix 10 SoC FPGA.
+
+ The RSU provides a way for customers to update the boot
+ configuration of a Stratix 10 SoC device with significantly reduced
+ risk of corrupting the bitstream storage and bricking the system.
+
+ Enable RSU support if you are using an Intel SoC FPGA with the RSU
+ feature enabled and you want Linux user space control.
+
+ Say Y here if you want Intel RSU support.
+
config QCOM_SCM
bool
depends on ARM || ARM64
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 2b6e3a0be595..3fcb91975bdc 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_EDD) += edd.o
obj-$(CONFIG_EFI_PCDP) += pcdp.o
obj-$(CONFIG_DMIID) += dmi-id.o
obj-$(CONFIG_INTEL_STRATIX10_SERVICE) += stratix10-svc.o
+obj-$(CONFIG_INTEL_STRATIX10_RSU) += stratix10-rsu.o
obj-$(CONFIG_ISCSI_IBFT_FIND) += iscsi_ibft_find.o
obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o
obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o
diff --git a/drivers/firmware/google/vpd.c b/drivers/firmware/google/vpd.c
index 0739f3b70347..db0812263d46 100644
--- a/drivers/firmware/google/vpd.c
+++ b/drivers/firmware/google/vpd.c
@@ -92,8 +92,8 @@ static int vpd_section_check_key_name(const u8 *key, s32 key_len)
return VPD_OK;
}
-static int vpd_section_attrib_add(const u8 *key, s32 key_len,
- const u8 *value, s32 value_len,
+static int vpd_section_attrib_add(const u8 *key, u32 key_len,
+ const u8 *value, u32 value_len,
void *arg)
{
int ret;
diff --git a/drivers/firmware/google/vpd_decode.c b/drivers/firmware/google/vpd_decode.c
index 92e3258552fc..dda525c0f968 100644
--- a/drivers/firmware/google/vpd_decode.c
+++ b/drivers/firmware/google/vpd_decode.c
@@ -9,8 +9,8 @@
#include "vpd_decode.h"
-static int vpd_decode_len(const s32 max_len, const u8 *in,
- s32 *length, s32 *decoded_len)
+static int vpd_decode_len(const u32 max_len, const u8 *in,
+ u32 *length, u32 *decoded_len)
{
u8 more;
int i = 0;
@@ -30,18 +30,39 @@ static int vpd_decode_len(const s32 max_len, const u8 *in,
} while (more);
*decoded_len = i;
+ return VPD_OK;
+}
+
+static int vpd_decode_entry(const u32 max_len, const u8 *input_buf,
+ u32 *_consumed, const u8 **entry, u32 *entry_len)
+{
+ u32 decoded_len;
+ u32 consumed = *_consumed;
+
+ if (vpd_decode_len(max_len - consumed, &input_buf[consumed],
+ entry_len, &decoded_len) != VPD_OK)
+ return VPD_FAIL;
+ if (max_len - consumed < decoded_len)
+ return VPD_FAIL;
+
+ consumed += decoded_len;
+ *entry = input_buf + consumed;
+
+ /* entry_len is untrusted data and must be checked again. */
+ if (max_len - consumed < *entry_len)
+ return VPD_FAIL;
+ consumed += decoded_len;
+ *_consumed = consumed;
return VPD_OK;
}
-int vpd_decode_string(const s32 max_len, const u8 *input_buf, s32 *consumed,
+int vpd_decode_string(const u32 max_len, const u8 *input_buf, u32 *consumed,
vpd_decode_callback callback, void *callback_arg)
{
int type;
- int res;
- s32 key_len;
- s32 value_len;
- s32 decoded_len;
+ u32 key_len;
+ u32 value_len;
const u8 *key;
const u8 *value;
@@ -56,26 +77,14 @@ int vpd_decode_string(const s32 max_len, const u8 *input_buf, s32 *consumed,
case VPD_TYPE_STRING:
(*consumed)++;
- /* key */
- res = vpd_decode_len(max_len - *consumed, &input_buf[*consumed],
- &key_len, &decoded_len);
- if (res != VPD_OK || *consumed + decoded_len >= max_len)
+ if (vpd_decode_entry(max_len, input_buf, consumed, &key,
+ &key_len) != VPD_OK)
return VPD_FAIL;
- *consumed += decoded_len;
- key = &input_buf[*consumed];
- *consumed += key_len;
-
- /* value */
- res = vpd_decode_len(max_len - *consumed, &input_buf[*consumed],
- &value_len, &decoded_len);
- if (res != VPD_OK || *consumed + decoded_len > max_len)
+ if (vpd_decode_entry(max_len, input_buf, consumed, &value,
+ &value_len) != VPD_OK)
return VPD_FAIL;
- *consumed += decoded_len;
- value = &input_buf[*consumed];
- *consumed += value_len;
-
if (type == VPD_TYPE_STRING)
return callback(key, key_len, value, value_len,
callback_arg);
diff --git a/drivers/firmware/google/vpd_decode.h b/drivers/firmware/google/vpd_decode.h
index cf8c2ace155a..8dbe41cac599 100644
--- a/drivers/firmware/google/vpd_decode.h
+++ b/drivers/firmware/google/vpd_decode.h
@@ -25,8 +25,8 @@ enum {
};
/* Callback for vpd_decode_string to invoke. */
-typedef int vpd_decode_callback(const u8 *key, s32 key_len,
- const u8 *value, s32 value_len,
+typedef int vpd_decode_callback(const u8 *key, u32 key_len,
+ const u8 *value, u32 value_len,
void *arg);
/*
@@ -44,7 +44,7 @@ typedef int vpd_decode_callback(const u8 *key, s32 key_len,
* If one entry is successfully decoded, sends it to callback and returns the
* result.
*/
-int vpd_decode_string(const s32 max_len, const u8 *input_buf, s32 *consumed,
+int vpd_decode_string(const u32 max_len, const u8 *input_buf, u32 *consumed,
vpd_decode_callback callback, void *callback_arg);
#endif /* __VPD_DECODE_H */
diff --git a/drivers/firmware/stratix10-rsu.c b/drivers/firmware/stratix10-rsu.c
new file mode 100644
index 000000000000..bb008c019920
--- /dev/null
+++ b/drivers/firmware/stratix10-rsu.c
@@ -0,0 +1,451 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018-2019, Intel Corporation
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/bitfield.h>
+#include <linux/completion.h>
+#include <linux/kobject.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/firmware/intel/stratix10-svc-client.h>
+#include <linux/string.h>
+#include <linux/sysfs.h>
+
+#define RSU_STATE_MASK GENMASK_ULL(31, 0)
+#define RSU_VERSION_MASK GENMASK_ULL(63, 32)
+#define RSU_ERROR_LOCATION_MASK GENMASK_ULL(31, 0)
+#define RSU_ERROR_DETAIL_MASK GENMASK_ULL(63, 32)
+#define RSU_FW_VERSION_MASK GENMASK_ULL(15, 0)
+
+#define RSU_TIMEOUT (msecs_to_jiffies(SVC_RSU_REQUEST_TIMEOUT_MS))
+
+#define INVALID_RETRY_COUNTER 0xFFFFFFFF
+
+typedef void (*rsu_callback)(struct stratix10_svc_client *client,
+ struct stratix10_svc_cb_data *data);
+/**
+ * struct stratix10_rsu_priv - rsu data structure
+ * @chan: pointer to the allocated service channel
+ * @client: active service client
+ * @completion: state for callback completion
+ * @lock: a mutex to protect callback completion state
+ * @status.current_image: address of image currently running in flash
+ * @status.fail_image: address of failed image in flash
+ * @status.version: the version number of RSU firmware
+ * @status.state: the state of RSU system
+ * @status.error_details: error code
+ * @status.error_location: the error offset inside the image that failed
+ * @retry_counter: the current image's retry counter
+ */
+struct stratix10_rsu_priv {
+ struct stratix10_svc_chan *chan;
+ struct stratix10_svc_client client;
+ struct completion completion;
+ struct mutex lock;
+ struct {
+ unsigned long current_image;
+ unsigned long fail_image;
+ unsigned int version;
+ unsigned int state;
+ unsigned int error_details;
+ unsigned int error_location;
+ } status;
+ unsigned int retry_counter;
+};
+
+/**
+ * rsu_status_callback() - Status callback from Intel Service Layer
+ * @client: pointer to service client
+ * @data: pointer to callback data structure
+ *
+ * Callback from Intel service layer for RSU status request. Status is
+ * only updated after a system reboot, so a get updated status call is
+ * made during driver probe.
+ */
+static void rsu_status_callback(struct stratix10_svc_client *client,
+ struct stratix10_svc_cb_data *data)
+{
+ struct stratix10_rsu_priv *priv = client->priv;
+ struct arm_smccc_res *res = (struct arm_smccc_res *)data->kaddr1;
+
+ if (data->status == BIT(SVC_STATUS_RSU_OK)) {
+ priv->status.version = FIELD_GET(RSU_VERSION_MASK,
+ res->a2);
+ priv->status.state = FIELD_GET(RSU_STATE_MASK, res->a2);
+ priv->status.fail_image = res->a1;
+ priv->status.current_image = res->a0;
+ priv->status.error_location =
+ FIELD_GET(RSU_ERROR_LOCATION_MASK, res->a3);
+ priv->status.error_details =
+ FIELD_GET(RSU_ERROR_DETAIL_MASK, res->a3);
+ } else {
+ dev_err(client->dev, "COMMAND_RSU_STATUS returned 0x%lX\n",
+ res->a0);
+ priv->status.version = 0;
+ priv->status.state = 0;
+ priv->status.fail_image = 0;
+ priv->status.current_image = 0;
+ priv->status.error_location = 0;
+ priv->status.error_details = 0;
+ }
+
+ complete(&priv->completion);
+}
+
+/**
+ * rsu_command_callback() - Update callback from Intel Service Layer
+ * @client: pointer to client
+ * @data: pointer to callback data structure
+ *
+ * Callback from Intel service layer for RSU commands.
+ */
+static void rsu_command_callback(struct stratix10_svc_client *client,
+ struct stratix10_svc_cb_data *data)
+{
+ struct stratix10_rsu_priv *priv = client->priv;
+
+ if (data->status != BIT(SVC_STATUS_RSU_OK))
+ dev_err(client->dev, "RSU returned status is %i\n",
+ data->status);
+ complete(&priv->completion);
+}
+
+/**
+ * rsu_retry_callback() - Callback from Intel service layer for getting
+ * the current image's retry counter from firmware
+ * @client: pointer to client
+ * @data: pointer to callback data structure
+ *
+ * Callback from Intel service layer for retry counter, which is used by
+ * user to know how many times the images is still allowed to reload
+ * itself before giving up and starting RSU fail-over flow.
+ */
+static void rsu_retry_callback(struct stratix10_svc_client *client,
+ struct stratix10_svc_cb_data *data)
+{
+ struct stratix10_rsu_priv *priv = client->priv;
+ unsigned int *counter = (unsigned int *)data->kaddr1;
+
+ if (data->status == BIT(SVC_STATUS_RSU_OK))
+ priv->retry_counter = *counter;
+ else
+ dev_err(client->dev, "Failed to get retry counter %i\n",
+ data->status);
+
+ complete(&priv->completion);
+}
+
+/**
+ * rsu_send_msg() - send a message to Intel service layer
+ * @priv: pointer to rsu private data
+ * @command: RSU status or update command
+ * @arg: the request argument, the bitstream address or notify status
+ * @callback: function pointer for the callback (status or update)
+ *
+ * Start an Intel service layer transaction to perform the SMC call that
+ * is necessary to get RSU boot log or set the address of bitstream to
+ * boot after reboot.
+ *
+ * Returns 0 on success or -ETIMEDOUT on error.
+ */
+static int rsu_send_msg(struct stratix10_rsu_priv *priv,
+ enum stratix10_svc_command_code command,
+ unsigned long arg,
+ rsu_callback callback)
+{
+ struct stratix10_svc_client_msg msg;
+ int ret;
+
+ mutex_lock(&priv->lock);
+ reinit_completion(&priv->completion);
+ priv->client.receive_cb = callback;
+
+ msg.command = command;
+ if (arg)
+ msg.arg[0] = arg;
+
+ ret = stratix10_svc_send(priv->chan, &msg);
+ if (ret < 0)
+ goto status_done;
+
+ ret = wait_for_completion_interruptible_timeout(&priv->completion,
+ RSU_TIMEOUT);
+ if (!ret) {
+ dev_err(priv->client.dev,
+ "timeout waiting for SMC call\n");
+ ret = -ETIMEDOUT;
+ goto status_done;
+ } else if (ret < 0) {
+ dev_err(priv->client.dev,
+ "error %d waiting for SMC call\n", ret);
+ goto status_done;
+ } else {
+ ret = 0;
+ }
+
+status_done:
+ stratix10_svc_done(priv->chan);
+ mutex_unlock(&priv->lock);
+ return ret;
+}
+
+/*
+ * This driver exposes some optional features of the Intel Stratix 10 SoC FPGA.
+ * The sysfs interfaces exposed here are FPGA Remote System Update (RSU)
+ * related. They allow user space software to query the configuration system
+ * status and to request optional reboot behavior specific to Intel FPGAs.
+ */
+
+static ssize_t current_image_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+ if (!priv)
+ return -ENODEV;
+
+ return sprintf(buf, "0x%08lx\n", priv->status.current_image);
+}
+
+static ssize_t fail_image_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+ if (!priv)
+ return -ENODEV;
+
+ return sprintf(buf, "0x%08lx\n", priv->status.fail_image);
+}
+
+static ssize_t version_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+ if (!priv)
+ return -ENODEV;
+
+ return sprintf(buf, "0x%08x\n", priv->status.version);
+}
+
+static ssize_t state_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+ if (!priv)
+ return -ENODEV;
+
+ return sprintf(buf, "0x%08x\n", priv->status.state);
+}
+
+static ssize_t error_location_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+ if (!priv)
+ return -ENODEV;
+
+ return sprintf(buf, "0x%08x\n", priv->status.error_location);
+}
+
+static ssize_t error_details_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+ if (!priv)
+ return -ENODEV;
+
+ return sprintf(buf, "0x%08x\n", priv->status.error_details);
+}
+
+static ssize_t retry_counter_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+ if (!priv)
+ return -ENODEV;
+
+ return sprintf(buf, "0x%08x\n", priv->retry_counter);
+}
+
+static ssize_t reboot_image_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+ unsigned long address;
+ int ret;
+
+ if (priv == 0)
+ return -ENODEV;
+
+ ret = kstrtoul(buf, 0, &address);
+ if (ret)
+ return ret;
+
+ ret = rsu_send_msg(priv, COMMAND_RSU_UPDATE,
+ address, rsu_command_callback);
+ if (ret) {
+ dev_err(dev, "Error, RSU update returned %i\n", ret);
+ return ret;
+ }
+
+ return count;
+}
+
+static ssize_t notify_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+ unsigned long status;
+ int ret;
+
+ if (priv == 0)
+ return -ENODEV;
+
+ ret = kstrtoul(buf, 0, &status);
+ if (ret)
+ return ret;
+
+ ret = rsu_send_msg(priv, COMMAND_RSU_NOTIFY,
+ status, rsu_command_callback);
+ if (ret) {
+ dev_err(dev, "Error, RSU notify returned %i\n", ret);
+ return ret;
+ }
+
+ /* to get the updated state */
+ ret = rsu_send_msg(priv, COMMAND_RSU_STATUS,
+ 0, rsu_status_callback);
+ if (ret) {
+ dev_err(dev, "Error, getting RSU status %i\n", ret);
+ return ret;
+ }
+
+ /* only 19.3 or late version FW supports retry counter feature */
+ if (FIELD_GET(RSU_FW_VERSION_MASK, priv->status.version)) {
+ ret = rsu_send_msg(priv, COMMAND_RSU_RETRY,
+ 0, rsu_retry_callback);
+ if (ret) {
+ dev_err(dev,
+ "Error, getting RSU retry %i\n", ret);
+ return ret;
+ }
+ }
+
+ return count;
+}
+
+static DEVICE_ATTR_RO(current_image);
+static DEVICE_ATTR_RO(fail_image);
+static DEVICE_ATTR_RO(state);
+static DEVICE_ATTR_RO(version);
+static DEVICE_ATTR_RO(error_location);
+static DEVICE_ATTR_RO(error_details);
+static DEVICE_ATTR_RO(retry_counter);
+static DEVICE_ATTR_WO(reboot_image);
+static DEVICE_ATTR_WO(notify);
+
+static struct attribute *rsu_attrs[] = {
+ &dev_attr_current_image.attr,
+ &dev_attr_fail_image.attr,
+ &dev_attr_state.attr,
+ &dev_attr_version.attr,
+ &dev_attr_error_location.attr,
+ &dev_attr_error_details.attr,
+ &dev_attr_retry_counter.attr,
+ &dev_attr_reboot_image.attr,
+ &dev_attr_notify.attr,
+ NULL
+};
+
+ATTRIBUTE_GROUPS(rsu);
+
+static int stratix10_rsu_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct stratix10_rsu_priv *priv;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->client.dev = dev;
+ priv->client.receive_cb = NULL;
+ priv->client.priv = priv;
+ priv->status.current_image = 0;
+ priv->status.fail_image = 0;
+ priv->status.error_location = 0;
+ priv->status.error_details = 0;
+ priv->status.version = 0;
+ priv->status.state = 0;
+ priv->retry_counter = INVALID_RETRY_COUNTER;
+
+ mutex_init(&priv->lock);
+ priv->chan = stratix10_svc_request_channel_byname(&priv->client,
+ SVC_CLIENT_RSU);
+ if (IS_ERR(priv->chan)) {
+ dev_err(dev, "couldn't get service channel %s\n",
+ SVC_CLIENT_RSU);
+ return PTR_ERR(priv->chan);
+ }
+
+ init_completion(&priv->completion);
+ platform_set_drvdata(pdev, priv);
+
+ /* get the initial state from firmware */
+ ret = rsu_send_msg(priv, COMMAND_RSU_STATUS,
+ 0, rsu_status_callback);
+ if (ret) {
+ dev_err(dev, "Error, getting RSU status %i\n", ret);
+ stratix10_svc_free_channel(priv->chan);
+ }
+
+ /* only 19.3 or late version FW supports retry counter feature */
+ if (FIELD_GET(RSU_FW_VERSION_MASK, priv->status.version)) {
+ ret = rsu_send_msg(priv, COMMAND_RSU_RETRY, 0,
+ rsu_retry_callback);
+ if (ret) {
+ dev_err(dev,
+ "Error, getting RSU retry %i\n", ret);
+ stratix10_svc_free_channel(priv->chan);
+ }
+ }
+
+ return ret;
+}
+
+static int stratix10_rsu_remove(struct platform_device *pdev)
+{
+ struct stratix10_rsu_priv *priv = platform_get_drvdata(pdev);
+
+ stratix10_svc_free_channel(priv->chan);
+ return 0;
+}
+
+static struct platform_driver stratix10_rsu_driver = {
+ .probe = stratix10_rsu_probe,
+ .remove = stratix10_rsu_remove,
+ .driver = {
+ .name = "stratix10-rsu",
+ .dev_groups = rsu_groups,
+ },
+};
+
+module_platform_driver(stratix10_rsu_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel Remote System Update Driver");
+MODULE_AUTHOR("Richard Gong <richard.gong@intel.com>");
diff --git a/drivers/firmware/stratix10-svc.c b/drivers/firmware/stratix10-svc.c
index 6e6514825ad0..b485321189e1 100644
--- a/drivers/firmware/stratix10-svc.c
+++ b/drivers/firmware/stratix10-svc.c
@@ -38,6 +38,9 @@
#define FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS 200
#define FPGA_CONFIG_STATUS_TIMEOUT_SEC 30
+/* stratix10 service layer clients */
+#define STRATIX10_RSU "stratix10-rsu"
+
typedef void (svc_invoke_fn)(unsigned long, unsigned long, unsigned long,
unsigned long, unsigned long, unsigned long,
unsigned long, unsigned long,
@@ -45,6 +48,14 @@ typedef void (svc_invoke_fn)(unsigned long, unsigned long, unsigned long,
struct stratix10_svc_chan;
/**
+ * struct stratix10_svc - svc private data
+ * @stratix10_svc_rsu: pointer to stratix10 RSU device
+ */
+struct stratix10_svc {
+ struct platform_device *stratix10_svc_rsu;
+};
+
+/**
* struct stratix10_svc_sh_memory - service shared memory structure
* @sync_complete: state for a completion
* @addr: physical address of shared memory block
@@ -296,7 +307,12 @@ static void svc_thread_recv_status_ok(struct stratix10_svc_data *p_data,
cb_data->status = BIT(SVC_STATUS_RECONFIG_COMPLETED);
break;
case COMMAND_RSU_UPDATE:
+ case COMMAND_RSU_NOTIFY:
+ cb_data->status = BIT(SVC_STATUS_RSU_OK);
+ break;
+ case COMMAND_RSU_RETRY:
cb_data->status = BIT(SVC_STATUS_RSU_OK);
+ cb_data->kaddr1 = &res.a1;
break;
default:
pr_warn("it shouldn't happen\n");
@@ -386,6 +402,16 @@ static int svc_normal_to_secure_thread(void *data)
a1 = pdata->arg[0];
a2 = 0;
break;
+ case COMMAND_RSU_NOTIFY:
+ a0 = INTEL_SIP_SMC_RSU_NOTIFY;
+ a1 = pdata->arg[0];
+ a2 = 0;
+ break;
+ case COMMAND_RSU_RETRY:
+ a0 = INTEL_SIP_SMC_RSU_RETRY_COUNTER;
+ a1 = 0;
+ a2 = 0;
+ break;
default:
pr_warn("it shouldn't happen\n");
break;
@@ -438,7 +464,28 @@ static int svc_normal_to_secure_thread(void *data)
pr_debug("%s: STATUS_REJECTED\n", __func__);
break;
case INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR:
+ case INTEL_SIP_SMC_RSU_ERROR:
pr_err("%s: STATUS_ERROR\n", __func__);
+ switch (pdata->command) {
+ /* for FPGA mgr */
+ case COMMAND_RECONFIG_DATA_CLAIM:
+ case COMMAND_RECONFIG:
+ case COMMAND_RECONFIG_DATA_SUBMIT:
+ case COMMAND_RECONFIG_STATUS:
+ cbdata->status =
+ BIT(SVC_STATUS_RECONFIG_ERROR);
+ break;
+
+ /* for RSU */
+ case COMMAND_RSU_STATUS:
+ case COMMAND_RSU_UPDATE:
+ case COMMAND_RSU_NOTIFY:
+ case COMMAND_RSU_RETRY:
+ cbdata->status =
+ BIT(SVC_STATUS_RSU_ERROR);
+ break;
+ }
+
cbdata->status = BIT(SVC_STATUS_RECONFIG_ERROR);
cbdata->kaddr1 = NULL;
cbdata->kaddr2 = NULL;
@@ -530,7 +577,7 @@ static int svc_get_sh_memory(struct platform_device *pdev,
if (!sh_memory->addr || !sh_memory->size) {
dev_err(dev,
- "fails to get shared memory info from secure world\n");
+ "failed to get shared memory info from secure world\n");
return -ENOMEM;
}
@@ -768,7 +815,7 @@ int stratix10_svc_send(struct stratix10_svc_chan *chan, void *msg)
"svc_smc_hvc_thread");
if (IS_ERR(chan->ctrl->task)) {
dev_err(chan->ctrl->dev,
- "fails to create svc_smc_hvc_thread\n");
+ "failed to create svc_smc_hvc_thread\n");
kfree(p_data);
return -EINVAL;
}
@@ -913,6 +960,8 @@ static int stratix10_svc_drv_probe(struct platform_device *pdev)
struct stratix10_svc_chan *chans;
struct gen_pool *genpool;
struct stratix10_svc_sh_memory *sh_memory;
+ struct stratix10_svc *svc;
+
svc_invoke_fn *invoke_fn;
size_t fifo_size;
int ret;
@@ -957,7 +1006,7 @@ static int stratix10_svc_drv_probe(struct platform_device *pdev)
fifo_size = sizeof(struct stratix10_svc_data) * SVC_NUM_DATA_IN_FIFO;
ret = kfifo_alloc(&controller->svc_fifo, fifo_size, GFP_KERNEL);
if (ret) {
- dev_err(dev, "fails to allocate FIFO\n");
+ dev_err(dev, "failed to allocate FIFO\n");
return ret;
}
spin_lock_init(&controller->svc_fifo_lock);
@@ -975,6 +1024,24 @@ static int stratix10_svc_drv_probe(struct platform_device *pdev)
list_add_tail(&controller->node, &svc_ctrl);
platform_set_drvdata(pdev, controller);
+ /* add svc client device(s) */
+ svc = devm_kzalloc(dev, sizeof(*svc), GFP_KERNEL);
+ if (!svc)
+ return -ENOMEM;
+
+ svc->stratix10_svc_rsu = platform_device_alloc(STRATIX10_RSU, 0);
+ if (!svc->stratix10_svc_rsu) {
+ dev_err(dev, "failed to allocate %s device\n", STRATIX10_RSU);
+ return -ENOMEM;
+ }
+
+ ret = platform_device_add(svc->stratix10_svc_rsu);
+ if (ret) {
+ platform_device_put(svc->stratix10_svc_rsu);
+ return ret;
+ }
+ dev_set_drvdata(dev, svc);
+
pr_info("Intel Service Layer Driver Initialized\n");
return ret;
@@ -982,8 +1049,11 @@ static int stratix10_svc_drv_probe(struct platform_device *pdev)
static int stratix10_svc_drv_remove(struct platform_device *pdev)
{
+ struct stratix10_svc *svc = dev_get_drvdata(&pdev->dev);
struct stratix10_svc_controller *ctrl = platform_get_drvdata(pdev);
+ platform_device_unregister(svc->stratix10_svc_rsu);
+
kfifo_free(&ctrl->svc_fifo);
if (ctrl->task) {
kthread_stop(ctrl->task);
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index cdd4f73b4869..73c779e920ed 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -46,11 +46,11 @@ config FPGA_MGR_ALTERA_PS_SPI
using the passive serial interface over SPI.
config FPGA_MGR_ALTERA_CVP
- tristate "Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager"
+ tristate "Altera CvP FPGA Manager"
depends on PCI
help
- FPGA manager driver support for Arria-V, Cyclone-V, Stratix-V
- and Arria 10 Altera FPGAs using the CvP interface over PCIe.
+ FPGA manager driver support for Arria-V, Cyclone-V, Stratix-V,
+ Arria 10 and Stratix10 Altera FPGAs using the CvP interface over PCIe.
config FPGA_MGR_ZYNQ_FPGA
tristate "Xilinx Zynq FPGA"
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index 312b9371742f..4865b74b00a4 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -39,8 +39,9 @@ obj-$(CONFIG_FPGA_DFL_FME_BRIDGE) += dfl-fme-br.o
obj-$(CONFIG_FPGA_DFL_FME_REGION) += dfl-fme-region.o
obj-$(CONFIG_FPGA_DFL_AFU) += dfl-afu.o
-dfl-fme-objs := dfl-fme-main.o dfl-fme-pr.o
+dfl-fme-objs := dfl-fme-main.o dfl-fme-pr.o dfl-fme-error.o
dfl-afu-objs := dfl-afu-main.o dfl-afu-region.o dfl-afu-dma-region.o
+dfl-afu-objs += dfl-afu-error.o
# Drivers for FPGAs which implement DFL
obj-$(CONFIG_FPGA_DFL_PCI) += dfl-pci.o
diff --git a/drivers/fpga/altera-cvp.c b/drivers/fpga/altera-cvp.c
index 770915fb97f9..4e0edb60bfba 100644
--- a/drivers/fpga/altera-cvp.c
+++ b/drivers/fpga/altera-cvp.c
@@ -22,10 +22,10 @@
#define TIMEOUT_US 2000 /* CVP STATUS timeout for USERMODE polling */
/* Vendor Specific Extended Capability Registers */
-#define VSE_PCIE_EXT_CAP_ID 0x200
+#define VSE_PCIE_EXT_CAP_ID 0x0
#define VSE_PCIE_EXT_CAP_ID_VAL 0x000b /* 16bit */
-#define VSE_CVP_STATUS 0x21c /* 32bit */
+#define VSE_CVP_STATUS 0x1c /* 32bit */
#define VSE_CVP_STATUS_CFG_RDY BIT(18) /* CVP_CONFIG_READY */
#define VSE_CVP_STATUS_CFG_ERR BIT(19) /* CVP_CONFIG_ERROR */
#define VSE_CVP_STATUS_CVP_EN BIT(20) /* ctrl block is enabling CVP */
@@ -33,41 +33,93 @@
#define VSE_CVP_STATUS_CFG_DONE BIT(23) /* CVP_CONFIG_DONE */
#define VSE_CVP_STATUS_PLD_CLK_IN_USE BIT(24) /* PLD_CLK_IN_USE */
-#define VSE_CVP_MODE_CTRL 0x220 /* 32bit */
+#define VSE_CVP_MODE_CTRL 0x20 /* 32bit */
#define VSE_CVP_MODE_CTRL_CVP_MODE BIT(0) /* CVP (1) or normal mode (0) */
#define VSE_CVP_MODE_CTRL_HIP_CLK_SEL BIT(1) /* PMA (1) or fabric clock (0) */
#define VSE_CVP_MODE_CTRL_NUMCLKS_OFF 8 /* NUMCLKS bits offset */
#define VSE_CVP_MODE_CTRL_NUMCLKS_MASK GENMASK(15, 8)
-#define VSE_CVP_DATA 0x228 /* 32bit */
-#define VSE_CVP_PROG_CTRL 0x22c /* 32bit */
+#define VSE_CVP_DATA 0x28 /* 32bit */
+#define VSE_CVP_PROG_CTRL 0x2c /* 32bit */
#define VSE_CVP_PROG_CTRL_CONFIG BIT(0)
#define VSE_CVP_PROG_CTRL_START_XFER BIT(1)
+#define VSE_CVP_PROG_CTRL_MASK GENMASK(1, 0)
-#define VSE_UNCOR_ERR_STATUS 0x234 /* 32bit */
+#define VSE_UNCOR_ERR_STATUS 0x34 /* 32bit */
#define VSE_UNCOR_ERR_CVP_CFG_ERR BIT(5) /* CVP_CONFIG_ERROR_LATCHED */
+#define V1_VSEC_OFFSET 0x200 /* Vendor Specific Offset V1 */
+/* V2 Defines */
+#define VSE_CVP_TX_CREDITS 0x49 /* 8bit */
+
+#define V2_CREDIT_TIMEOUT_US 20000
+#define V2_CHECK_CREDIT_US 10
+#define V2_POLL_TIMEOUT_US 1000000
+#define V2_USER_TIMEOUT_US 500000
+
+#define V1_POLL_TIMEOUT_US 10
+
#define DRV_NAME "altera-cvp"
#define ALTERA_CVP_MGR_NAME "Altera CvP FPGA Manager"
+/* Write block sizes */
+#define ALTERA_CVP_V1_SIZE 4
+#define ALTERA_CVP_V2_SIZE 4096
+
/* Optional CvP config error status check for debugging */
static bool altera_cvp_chkcfg;
+struct cvp_priv;
+
struct altera_cvp_conf {
struct fpga_manager *mgr;
struct pci_dev *pci_dev;
void __iomem *map;
- void (*write_data)(struct altera_cvp_conf *, u32);
+ void (*write_data)(struct altera_cvp_conf *conf,
+ u32 data);
char mgr_name[64];
u8 numclks;
+ u32 sent_packets;
+ u32 vsec_offset;
+ const struct cvp_priv *priv;
+};
+
+struct cvp_priv {
+ void (*switch_clk)(struct altera_cvp_conf *conf);
+ int (*clear_state)(struct altera_cvp_conf *conf);
+ int (*wait_credit)(struct fpga_manager *mgr, u32 blocks);
+ size_t block_size;
+ int poll_time_us;
+ int user_time_us;
};
+static int altera_read_config_byte(struct altera_cvp_conf *conf,
+ int where, u8 *val)
+{
+ return pci_read_config_byte(conf->pci_dev, conf->vsec_offset + where,
+ val);
+}
+
+static int altera_read_config_dword(struct altera_cvp_conf *conf,
+ int where, u32 *val)
+{
+ return pci_read_config_dword(conf->pci_dev, conf->vsec_offset + where,
+ val);
+}
+
+static int altera_write_config_dword(struct altera_cvp_conf *conf,
+ int where, u32 val)
+{
+ return pci_write_config_dword(conf->pci_dev, conf->vsec_offset + where,
+ val);
+}
+
static enum fpga_mgr_states altera_cvp_state(struct fpga_manager *mgr)
{
struct altera_cvp_conf *conf = mgr->priv;
u32 status;
- pci_read_config_dword(conf->pci_dev, VSE_CVP_STATUS, &status);
+ altera_read_config_dword(conf, VSE_CVP_STATUS, &status);
if (status & VSE_CVP_STATUS_CFG_DONE)
return FPGA_MGR_STATE_OPERATING;
@@ -85,7 +137,8 @@ static void altera_cvp_write_data_iomem(struct altera_cvp_conf *conf, u32 val)
static void altera_cvp_write_data_config(struct altera_cvp_conf *conf, u32 val)
{
- pci_write_config_dword(conf->pci_dev, VSE_CVP_DATA, val);
+ pci_write_config_dword(conf->pci_dev, conf->vsec_offset + VSE_CVP_DATA,
+ val);
}
/* switches between CvP clock and internal clock */
@@ -95,10 +148,10 @@ static void altera_cvp_dummy_write(struct altera_cvp_conf *conf)
u32 val;
/* set 1 CVP clock cycle for every CVP Data Register Write */
- pci_read_config_dword(conf->pci_dev, VSE_CVP_MODE_CTRL, &val);
+ altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val);
val &= ~VSE_CVP_MODE_CTRL_NUMCLKS_MASK;
val |= 1 << VSE_CVP_MODE_CTRL_NUMCLKS_OFF;
- pci_write_config_dword(conf->pci_dev, VSE_CVP_MODE_CTRL, val);
+ altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val);
for (i = 0; i < CVP_DUMMY_WR; i++)
conf->write_data(conf, 0); /* dummy data, could be any value */
@@ -115,7 +168,7 @@ static int altera_cvp_wait_status(struct altera_cvp_conf *conf, u32 status_mask,
retries++;
do {
- pci_read_config_dword(conf->pci_dev, VSE_CVP_STATUS, &val);
+ altera_read_config_dword(conf, VSE_CVP_STATUS, &val);
if ((val & status_mask) == status_val)
return 0;
@@ -126,32 +179,136 @@ static int altera_cvp_wait_status(struct altera_cvp_conf *conf, u32 status_mask,
return -ETIMEDOUT;
}
+static int altera_cvp_chk_error(struct fpga_manager *mgr, size_t bytes)
+{
+ struct altera_cvp_conf *conf = mgr->priv;
+ u32 val;
+ int ret;
+
+ /* STEP 10 (optional) - check CVP_CONFIG_ERROR flag */
+ ret = altera_read_config_dword(conf, VSE_CVP_STATUS, &val);
+ if (ret || (val & VSE_CVP_STATUS_CFG_ERR)) {
+ dev_err(&mgr->dev, "CVP_CONFIG_ERROR after %zu bytes!\n",
+ bytes);
+ return -EPROTO;
+ }
+ return 0;
+}
+
+/*
+ * CvP Version2 Functions
+ * Recent Intel FPGAs use a credit mechanism to throttle incoming
+ * bitstreams and a different method of clearing the state.
+ */
+
+static int altera_cvp_v2_clear_state(struct altera_cvp_conf *conf)
+{
+ u32 val;
+ int ret;
+
+ /* Clear the START_XFER and CVP_CONFIG bits */
+ ret = altera_read_config_dword(conf, VSE_CVP_PROG_CTRL, &val);
+ if (ret) {
+ dev_err(&conf->pci_dev->dev,
+ "Error reading CVP Program Control Register\n");
+ return ret;
+ }
+
+ val &= ~VSE_CVP_PROG_CTRL_MASK;
+ ret = altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val);
+ if (ret) {
+ dev_err(&conf->pci_dev->dev,
+ "Error writing CVP Program Control Register\n");
+ return ret;
+ }
+
+ return altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY, 0,
+ conf->priv->poll_time_us);
+}
+
+static int altera_cvp_v2_wait_for_credit(struct fpga_manager *mgr,
+ u32 blocks)
+{
+ u32 timeout = V2_CREDIT_TIMEOUT_US / V2_CHECK_CREDIT_US;
+ struct altera_cvp_conf *conf = mgr->priv;
+ int ret;
+ u8 val;
+
+ do {
+ ret = altera_read_config_byte(conf, VSE_CVP_TX_CREDITS, &val);
+ if (ret) {
+ dev_err(&conf->pci_dev->dev,
+ "Error reading CVP Credit Register\n");
+ return ret;
+ }
+
+ /* Return if there is space in FIFO */
+ if (val - (u8)conf->sent_packets)
+ return 0;
+
+ ret = altera_cvp_chk_error(mgr, blocks * ALTERA_CVP_V2_SIZE);
+ if (ret) {
+ dev_err(&conf->pci_dev->dev,
+ "CE Bit error credit reg[0x%x]:sent[0x%x]\n",
+ val, conf->sent_packets);
+ return -EAGAIN;
+ }
+
+ /* Limit the check credit byte traffic */
+ usleep_range(V2_CHECK_CREDIT_US, V2_CHECK_CREDIT_US + 1);
+ } while (timeout--);
+
+ dev_err(&conf->pci_dev->dev, "Timeout waiting for credit\n");
+ return -ETIMEDOUT;
+}
+
+static int altera_cvp_send_block(struct altera_cvp_conf *conf,
+ const u32 *data, size_t len)
+{
+ u32 mask, words = len / sizeof(u32);
+ int i, remainder;
+
+ for (i = 0; i < words; i++)
+ conf->write_data(conf, *data++);
+
+ /* write up to 3 trailing bytes, if any */
+ remainder = len % sizeof(u32);
+ if (remainder) {
+ mask = BIT(remainder * 8) - 1;
+ if (mask)
+ conf->write_data(conf, *data & mask);
+ }
+
+ return 0;
+}
+
static int altera_cvp_teardown(struct fpga_manager *mgr,
struct fpga_image_info *info)
{
struct altera_cvp_conf *conf = mgr->priv;
- struct pci_dev *pdev = conf->pci_dev;
int ret;
u32 val;
/* STEP 12 - reset START_XFER bit */
- pci_read_config_dword(pdev, VSE_CVP_PROG_CTRL, &val);
+ altera_read_config_dword(conf, VSE_CVP_PROG_CTRL, &val);
val &= ~VSE_CVP_PROG_CTRL_START_XFER;
- pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val);
+ altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val);
/* STEP 13 - reset CVP_CONFIG bit */
val &= ~VSE_CVP_PROG_CTRL_CONFIG;
- pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val);
+ altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val);
/*
* STEP 14
* - set CVP_NUMCLKS to 1 and then issue CVP_DUMMY_WR dummy
* writes to the HIP
*/
- altera_cvp_dummy_write(conf); /* from CVP clock to internal clock */
+ if (conf->priv->switch_clk)
+ conf->priv->switch_clk(conf);
/* STEP 15 - poll CVP_CONFIG_READY bit for 0 with 10us timeout */
- ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY, 0, 10);
+ ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY, 0,
+ conf->priv->poll_time_us);
if (ret)
dev_err(&mgr->dev, "CFG_RDY == 0 timeout\n");
@@ -163,7 +320,6 @@ static int altera_cvp_write_init(struct fpga_manager *mgr,
const char *buf, size_t count)
{
struct altera_cvp_conf *conf = mgr->priv;
- struct pci_dev *pdev = conf->pci_dev;
u32 iflags, val;
int ret;
@@ -183,7 +339,7 @@ static int altera_cvp_write_init(struct fpga_manager *mgr,
conf->numclks = 1; /* for uncompressed and unencrypted images */
/* STEP 1 - read CVP status and check CVP_EN flag */
- pci_read_config_dword(pdev, VSE_CVP_STATUS, &val);
+ altera_read_config_dword(conf, VSE_CVP_STATUS, &val);
if (!(val & VSE_CVP_STATUS_CVP_EN)) {
dev_err(&mgr->dev, "CVP mode off: 0x%04x\n", val);
return -ENODEV;
@@ -201,30 +357,42 @@ static int altera_cvp_write_init(struct fpga_manager *mgr,
* - set HIP_CLK_SEL and CVP_MODE (must be set in the order mentioned)
*/
/* switch from fabric to PMA clock */
- pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val);
+ altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val);
val |= VSE_CVP_MODE_CTRL_HIP_CLK_SEL;
- pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val);
+ altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val);
/* set CVP mode */
- pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val);
+ altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val);
val |= VSE_CVP_MODE_CTRL_CVP_MODE;
- pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val);
+ altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val);
/*
* STEP 3
* - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP
*/
- altera_cvp_dummy_write(conf);
+ if (conf->priv->switch_clk)
+ conf->priv->switch_clk(conf);
+
+ if (conf->priv->clear_state) {
+ ret = conf->priv->clear_state(conf);
+ if (ret) {
+ dev_err(&mgr->dev, "Problem clearing out state\n");
+ return ret;
+ }
+ }
+
+ conf->sent_packets = 0;
/* STEP 4 - set CVP_CONFIG bit */
- pci_read_config_dword(pdev, VSE_CVP_PROG_CTRL, &val);
+ altera_read_config_dword(conf, VSE_CVP_PROG_CTRL, &val);
/* request control block to begin transfer using CVP */
val |= VSE_CVP_PROG_CTRL_CONFIG;
- pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val);
+ altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val);
- /* STEP 5 - poll CVP_CONFIG READY for 1 with 10us timeout */
+ /* STEP 5 - poll CVP_CONFIG READY for 1 with timeout */
ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY,
- VSE_CVP_STATUS_CFG_RDY, 10);
+ VSE_CVP_STATUS_CFG_RDY,
+ conf->priv->poll_time_us);
if (ret) {
dev_warn(&mgr->dev, "CFG_RDY == 1 timeout\n");
return ret;
@@ -234,33 +402,28 @@ static int altera_cvp_write_init(struct fpga_manager *mgr,
* STEP 6
* - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP
*/
- altera_cvp_dummy_write(conf);
+ if (conf->priv->switch_clk)
+ conf->priv->switch_clk(conf);
+
+ if (altera_cvp_chkcfg) {
+ ret = altera_cvp_chk_error(mgr, 0);
+ if (ret) {
+ dev_warn(&mgr->dev, "CFG_RDY == 1 timeout\n");
+ return ret;
+ }
+ }
/* STEP 7 - set START_XFER */
- pci_read_config_dword(pdev, VSE_CVP_PROG_CTRL, &val);
+ altera_read_config_dword(conf, VSE_CVP_PROG_CTRL, &val);
val |= VSE_CVP_PROG_CTRL_START_XFER;
- pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val);
+ altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val);
/* STEP 8 - start transfer (set CVP_NUMCLKS for bitstream) */
- pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val);
- val &= ~VSE_CVP_MODE_CTRL_NUMCLKS_MASK;
- val |= conf->numclks << VSE_CVP_MODE_CTRL_NUMCLKS_OFF;
- pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val);
-
- return 0;
-}
-
-static inline int altera_cvp_chk_error(struct fpga_manager *mgr, size_t bytes)
-{
- struct altera_cvp_conf *conf = mgr->priv;
- u32 val;
-
- /* STEP 10 (optional) - check CVP_CONFIG_ERROR flag */
- pci_read_config_dword(conf->pci_dev, VSE_CVP_STATUS, &val);
- if (val & VSE_CVP_STATUS_CFG_ERR) {
- dev_err(&mgr->dev, "CVP_CONFIG_ERROR after %zu bytes!\n",
- bytes);
- return -EPROTO;
+ if (conf->priv->switch_clk) {
+ altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val);
+ val &= ~VSE_CVP_MODE_CTRL_NUMCLKS_MASK;
+ val |= conf->numclks << VSE_CVP_MODE_CTRL_NUMCLKS_OFF;
+ altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val);
}
return 0;
}
@@ -269,20 +432,32 @@ static int altera_cvp_write(struct fpga_manager *mgr, const char *buf,
size_t count)
{
struct altera_cvp_conf *conf = mgr->priv;
+ size_t done, remaining, len;
const u32 *data;
- size_t done, remaining;
int status = 0;
- u32 mask;
/* STEP 9 - write 32-bit data from RBF file to CVP data register */
data = (u32 *)buf;
remaining = count;
done = 0;
- while (remaining >= 4) {
- conf->write_data(conf, *data++);
- done += 4;
- remaining -= 4;
+ while (remaining) {
+ /* Use credit throttling if available */
+ if (conf->priv->wait_credit) {
+ status = conf->priv->wait_credit(mgr, done);
+ if (status) {
+ dev_err(&conf->pci_dev->dev,
+ "Wait Credit ERR: 0x%x\n", status);
+ return status;
+ }
+ }
+
+ len = min(conf->priv->block_size, remaining);
+ altera_cvp_send_block(conf, data, len);
+ data += len / sizeof(u32);
+ done += len;
+ remaining -= len;
+ conf->sent_packets++;
/*
* STEP 10 (optional) and STEP 11
@@ -300,11 +475,6 @@ static int altera_cvp_write(struct fpga_manager *mgr, const char *buf,
}
}
- /* write up to 3 trailing bytes, if any */
- mask = BIT(remaining * 8) - 1;
- if (mask)
- conf->write_data(conf, *data & mask);
-
if (altera_cvp_chkcfg)
status = altera_cvp_chk_error(mgr, count);
@@ -315,31 +485,30 @@ static int altera_cvp_write_complete(struct fpga_manager *mgr,
struct fpga_image_info *info)
{
struct altera_cvp_conf *conf = mgr->priv;
- struct pci_dev *pdev = conf->pci_dev;
+ u32 mask, val;
int ret;
- u32 mask;
- u32 val;
ret = altera_cvp_teardown(mgr, info);
if (ret)
return ret;
/* STEP 16 - check CVP_CONFIG_ERROR_LATCHED bit */
- pci_read_config_dword(pdev, VSE_UNCOR_ERR_STATUS, &val);
+ altera_read_config_dword(conf, VSE_UNCOR_ERR_STATUS, &val);
if (val & VSE_UNCOR_ERR_CVP_CFG_ERR) {
dev_err(&mgr->dev, "detected CVP_CONFIG_ERROR_LATCHED!\n");
return -EPROTO;
}
/* STEP 17 - reset CVP_MODE and HIP_CLK_SEL bit */
- pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val);
+ altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val);
val &= ~VSE_CVP_MODE_CTRL_HIP_CLK_SEL;
val &= ~VSE_CVP_MODE_CTRL_CVP_MODE;
- pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val);
+ altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val);
/* STEP 18 - poll PLD_CLK_IN_USE and USER_MODE bits */
mask = VSE_CVP_STATUS_PLD_CLK_IN_USE | VSE_CVP_STATUS_USERMODE;
- ret = altera_cvp_wait_status(conf, mask, mask, TIMEOUT_US);
+ ret = altera_cvp_wait_status(conf, mask, mask,
+ conf->priv->user_time_us);
if (ret)
dev_err(&mgr->dev, "PLD_CLK_IN_USE|USERMODE timeout\n");
@@ -353,6 +522,21 @@ static const struct fpga_manager_ops altera_cvp_ops = {
.write_complete = altera_cvp_write_complete,
};
+static const struct cvp_priv cvp_priv_v1 = {
+ .switch_clk = altera_cvp_dummy_write,
+ .block_size = ALTERA_CVP_V1_SIZE,
+ .poll_time_us = V1_POLL_TIMEOUT_US,
+ .user_time_us = TIMEOUT_US,
+};
+
+static const struct cvp_priv cvp_priv_v2 = {
+ .clear_state = altera_cvp_v2_clear_state,
+ .wait_credit = altera_cvp_v2_wait_for_credit,
+ .block_size = ALTERA_CVP_V2_SIZE,
+ .poll_time_us = V2_POLL_TIMEOUT_US,
+ .user_time_us = V2_USER_TIMEOUT_US,
+};
+
static ssize_t chkcfg_show(struct device_driver *dev, char *buf)
{
return snprintf(buf, 3, "%d\n", altera_cvp_chkcfg);
@@ -394,22 +578,29 @@ static int altera_cvp_probe(struct pci_dev *pdev,
{
struct altera_cvp_conf *conf;
struct fpga_manager *mgr;
+ int ret, offset;
u16 cmd, val;
u32 regval;
- int ret;
+
+ /* Discover the Vendor Specific Offset for this device */
+ offset = pci_find_next_ext_capability(pdev, 0, PCI_EXT_CAP_ID_VNDR);
+ if (!offset) {
+ dev_err(&pdev->dev, "No Vendor Specific Offset.\n");
+ return -ENODEV;
+ }
/*
* First check if this is the expected FPGA device. PCI config
* space access works without enabling the PCI device, memory
* space access is enabled further down.
*/
- pci_read_config_word(pdev, VSE_PCIE_EXT_CAP_ID, &val);
+ pci_read_config_word(pdev, offset + VSE_PCIE_EXT_CAP_ID, &val);
if (val != VSE_PCIE_EXT_CAP_ID_VAL) {
dev_err(&pdev->dev, "Wrong EXT_CAP_ID value 0x%x\n", val);
return -ENODEV;
}
- pci_read_config_dword(pdev, VSE_CVP_STATUS, &regval);
+ pci_read_config_dword(pdev, offset + VSE_CVP_STATUS, &regval);
if (!(regval & VSE_CVP_STATUS_CVP_EN)) {
dev_err(&pdev->dev,
"CVP is disabled for this device: CVP_STATUS Reg 0x%x\n",
@@ -421,6 +612,8 @@ static int altera_cvp_probe(struct pci_dev *pdev,
if (!conf)
return -ENOMEM;
+ conf->vsec_offset = offset;
+
/*
* Enable memory BAR access. We cannot use pci_enable_device() here
* because it will make the driver unusable with FPGA devices that
@@ -445,6 +638,11 @@ static int altera_cvp_probe(struct pci_dev *pdev,
conf->pci_dev = pdev;
conf->write_data = altera_cvp_write_data_iomem;
+ if (conf->vsec_offset == V1_VSEC_OFFSET)
+ conf->priv = &cvp_priv_v1;
+ else
+ conf->priv = &cvp_priv_v2;
+
conf->map = pci_iomap(pdev, CVP_BAR, 0);
if (!conf->map) {
dev_warn(&pdev->dev, "Mapping CVP BAR failed\n");
diff --git a/drivers/fpga/altera-pr-ip-core-plat.c b/drivers/fpga/altera-pr-ip-core-plat.c
index b293d83143f1..99b9cc0e70f0 100644
--- a/drivers/fpga/altera-pr-ip-core-plat.c
+++ b/drivers/fpga/altera-pr-ip-core-plat.c
@@ -32,7 +32,9 @@ static int alt_pr_platform_remove(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- return alt_pr_unregister(dev);
+ alt_pr_unregister(dev);
+
+ return 0;
}
static const struct of_device_id alt_pr_of_match[] = {
diff --git a/drivers/fpga/altera-pr-ip-core.c b/drivers/fpga/altera-pr-ip-core.c
index a7a3bf0b5202..2cf25fd5e897 100644
--- a/drivers/fpga/altera-pr-ip-core.c
+++ b/drivers/fpga/altera-pr-ip-core.c
@@ -201,15 +201,13 @@ int alt_pr_register(struct device *dev, void __iomem *reg_base)
}
EXPORT_SYMBOL_GPL(alt_pr_register);
-int alt_pr_unregister(struct device *dev)
+void alt_pr_unregister(struct device *dev)
{
struct fpga_manager *mgr = dev_get_drvdata(dev);
dev_dbg(dev, "%s\n", __func__);
fpga_mgr_unregister(mgr);
-
- return 0;
}
EXPORT_SYMBOL_GPL(alt_pr_unregister);
diff --git a/drivers/fpga/dfl-afu-error.c b/drivers/fpga/dfl-afu-error.c
new file mode 100644
index 000000000000..c1467ae1a6b6
--- /dev/null
+++ b/drivers/fpga/dfl-afu-error.c
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for FPGA Accelerated Function Unit (AFU) Error Reporting
+ *
+ * Copyright 2019 Intel Corporation, Inc.
+ *
+ * Authors:
+ * Wu Hao <hao.wu@linux.intel.com>
+ * Xiao Guangrong <guangrong.xiao@linux.intel.com>
+ * Joseph Grecco <joe.grecco@intel.com>
+ * Enno Luebbers <enno.luebbers@intel.com>
+ * Tim Whisonant <tim.whisonant@intel.com>
+ * Ananda Ravuri <ananda.ravuri@intel.com>
+ * Mitchel Henry <henry.mitchel@intel.com>
+ */
+
+#include <linux/uaccess.h>
+
+#include "dfl-afu.h"
+
+#define PORT_ERROR_MASK 0x8
+#define PORT_ERROR 0x10
+#define PORT_FIRST_ERROR 0x18
+#define PORT_MALFORMED_REQ0 0x20
+#define PORT_MALFORMED_REQ1 0x28
+
+#define ERROR_MASK GENMASK_ULL(63, 0)
+
+/* mask or unmask port errors by the error mask register. */
+static void __afu_port_err_mask(struct device *dev, bool mask)
+{
+ void __iomem *base;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, PORT_FEATURE_ID_ERROR);
+
+ writeq(mask ? ERROR_MASK : 0, base + PORT_ERROR_MASK);
+}
+
+static void afu_port_err_mask(struct device *dev, bool mask)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+
+ mutex_lock(&pdata->lock);
+ __afu_port_err_mask(dev, mask);
+ mutex_unlock(&pdata->lock);
+}
+
+/* clear port errors. */
+static int afu_port_err_clear(struct device *dev, u64 err)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ struct platform_device *pdev = to_platform_device(dev);
+ void __iomem *base_err, *base_hdr;
+ int ret = -EBUSY;
+ u64 v;
+
+ base_err = dfl_get_feature_ioaddr_by_id(dev, PORT_FEATURE_ID_ERROR);
+ base_hdr = dfl_get_feature_ioaddr_by_id(dev, PORT_FEATURE_ID_HEADER);
+
+ mutex_lock(&pdata->lock);
+
+ /*
+ * clear Port Errors
+ *
+ * - Check for AP6 State
+ * - Halt Port by keeping Port in reset
+ * - Set PORT Error mask to all 1 to mask errors
+ * - Clear all errors
+ * - Set Port mask to all 0 to enable errors
+ * - All errors start capturing new errors
+ * - Enable Port by pulling the port out of reset
+ */
+
+ /* if device is still in AP6 power state, can not clear any error. */
+ v = readq(base_hdr + PORT_HDR_STS);
+ if (FIELD_GET(PORT_STS_PWR_STATE, v) == PORT_STS_PWR_STATE_AP6) {
+ dev_err(dev, "Could not clear errors, device in AP6 state.\n");
+ goto done;
+ }
+
+ /* Halt Port by keeping Port in reset */
+ ret = __afu_port_disable(pdev);
+ if (ret)
+ goto done;
+
+ /* Mask all errors */
+ __afu_port_err_mask(dev, true);
+
+ /* Clear errors if err input matches with current port errors.*/
+ v = readq(base_err + PORT_ERROR);
+
+ if (v == err) {
+ writeq(v, base_err + PORT_ERROR);
+
+ v = readq(base_err + PORT_FIRST_ERROR);
+ writeq(v, base_err + PORT_FIRST_ERROR);
+ } else {
+ ret = -EINVAL;
+ }
+
+ /* Clear mask */
+ __afu_port_err_mask(dev, false);
+
+ /* Enable the Port by clear the reset */
+ __afu_port_enable(pdev);
+
+done:
+ mutex_unlock(&pdata->lock);
+ return ret;
+}
+
+static ssize_t errors_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ void __iomem *base;
+ u64 error;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, PORT_FEATURE_ID_ERROR);
+
+ mutex_lock(&pdata->lock);
+ error = readq(base + PORT_ERROR);
+ mutex_unlock(&pdata->lock);
+
+ return sprintf(buf, "0x%llx\n", (unsigned long long)error);
+}
+
+static ssize_t errors_store(struct device *dev, struct device_attribute *attr,
+ const char *buff, size_t count)
+{
+ u64 value;
+ int ret;
+
+ if (kstrtou64(buff, 0, &value))
+ return -EINVAL;
+
+ ret = afu_port_err_clear(dev, value);
+
+ return ret ? ret : count;
+}
+static DEVICE_ATTR_RW(errors);
+
+static ssize_t first_error_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ void __iomem *base;
+ u64 error;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, PORT_FEATURE_ID_ERROR);
+
+ mutex_lock(&pdata->lock);
+ error = readq(base + PORT_FIRST_ERROR);
+ mutex_unlock(&pdata->lock);
+
+ return sprintf(buf, "0x%llx\n", (unsigned long long)error);
+}
+static DEVICE_ATTR_RO(first_error);
+
+static ssize_t first_malformed_req_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ void __iomem *base;
+ u64 req0, req1;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, PORT_FEATURE_ID_ERROR);
+
+ mutex_lock(&pdata->lock);
+ req0 = readq(base + PORT_MALFORMED_REQ0);
+ req1 = readq(base + PORT_MALFORMED_REQ1);
+ mutex_unlock(&pdata->lock);
+
+ return sprintf(buf, "0x%016llx%016llx\n",
+ (unsigned long long)req1, (unsigned long long)req0);
+}
+static DEVICE_ATTR_RO(first_malformed_req);
+
+static struct attribute *port_err_attrs[] = {
+ &dev_attr_errors.attr,
+ &dev_attr_first_error.attr,
+ &dev_attr_first_malformed_req.attr,
+ NULL,
+};
+
+static umode_t port_err_attrs_visible(struct kobject *kobj,
+ struct attribute *attr, int n)
+{
+ struct device *dev = kobj_to_dev(kobj);
+
+ /*
+ * sysfs entries are visible only if related private feature is
+ * enumerated.
+ */
+ if (!dfl_get_feature_by_id(dev, PORT_FEATURE_ID_ERROR))
+ return 0;
+
+ return attr->mode;
+}
+
+const struct attribute_group port_err_group = {
+ .name = "errors",
+ .attrs = port_err_attrs,
+ .is_visible = port_err_attrs_visible,
+};
+
+static int port_err_init(struct platform_device *pdev,
+ struct dfl_feature *feature)
+{
+ afu_port_err_mask(&pdev->dev, false);
+
+ return 0;
+}
+
+static void port_err_uinit(struct platform_device *pdev,
+ struct dfl_feature *feature)
+{
+ afu_port_err_mask(&pdev->dev, true);
+}
+
+const struct dfl_feature_id port_err_id_table[] = {
+ {.id = PORT_FEATURE_ID_ERROR,},
+ {0,}
+};
+
+const struct dfl_feature_ops port_err_ops = {
+ .init = port_err_init,
+ .uinit = port_err_uinit,
+};
diff --git a/drivers/fpga/dfl-afu-main.c b/drivers/fpga/dfl-afu-main.c
index 02baa6a227c0..e4a34dc7947f 100644
--- a/drivers/fpga/dfl-afu-main.c
+++ b/drivers/fpga/dfl-afu-main.c
@@ -22,14 +22,17 @@
#include "dfl-afu.h"
/**
- * port_enable - enable a port
+ * __afu_port_enable - enable a port by clear reset
* @pdev: port platform device.
*
* Enable Port by clear the port soft reset bit, which is set by default.
* The AFU is unable to respond to any MMIO access while in reset.
- * port_enable function should only be used after port_disable function.
+ * __afu_port_enable function should only be used after __afu_port_disable
+ * function.
+ *
+ * The caller needs to hold lock for protection.
*/
-static void port_enable(struct platform_device *pdev)
+void __afu_port_enable(struct platform_device *pdev)
{
struct dfl_feature_platform_data *pdata = dev_get_platdata(&pdev->dev);
void __iomem *base;
@@ -52,13 +55,14 @@ static void port_enable(struct platform_device *pdev)
#define RST_POLL_TIMEOUT 1000 /* us */
/**
- * port_disable - disable a port
+ * __afu_port_disable - disable a port by hold reset
* @pdev: port platform device.
*
- * Disable Port by setting the port soft reset bit, it puts the port into
- * reset.
+ * Disable Port by setting the port soft reset bit, it puts the port into reset.
+ *
+ * The caller needs to hold lock for protection.
*/
-static int port_disable(struct platform_device *pdev)
+int __afu_port_disable(struct platform_device *pdev)
{
struct dfl_feature_platform_data *pdata = dev_get_platdata(&pdev->dev);
void __iomem *base;
@@ -104,9 +108,9 @@ static int __port_reset(struct platform_device *pdev)
{
int ret;
- ret = port_disable(pdev);
+ ret = __afu_port_disable(pdev);
if (!ret)
- port_enable(pdev);
+ __afu_port_enable(pdev);
return ret;
}
@@ -141,27 +145,267 @@ id_show(struct device *dev, struct device_attribute *attr, char *buf)
}
static DEVICE_ATTR_RO(id);
-static const struct attribute *port_hdr_attrs[] = {
+static ssize_t
+ltr_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ void __iomem *base;
+ u64 v;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, PORT_FEATURE_ID_HEADER);
+
+ mutex_lock(&pdata->lock);
+ v = readq(base + PORT_HDR_CTRL);
+ mutex_unlock(&pdata->lock);
+
+ return sprintf(buf, "%x\n", (u8)FIELD_GET(PORT_CTRL_LATENCY, v));
+}
+
+static ssize_t
+ltr_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ void __iomem *base;
+ bool ltr;
+ u64 v;
+
+ if (kstrtobool(buf, &ltr))
+ return -EINVAL;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, PORT_FEATURE_ID_HEADER);
+
+ mutex_lock(&pdata->lock);
+ v = readq(base + PORT_HDR_CTRL);
+ v &= ~PORT_CTRL_LATENCY;
+ v |= FIELD_PREP(PORT_CTRL_LATENCY, ltr ? 1 : 0);
+ writeq(v, base + PORT_HDR_CTRL);
+ mutex_unlock(&pdata->lock);
+
+ return count;
+}
+static DEVICE_ATTR_RW(ltr);
+
+static ssize_t
+ap1_event_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ void __iomem *base;
+ u64 v;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, PORT_FEATURE_ID_HEADER);
+
+ mutex_lock(&pdata->lock);
+ v = readq(base + PORT_HDR_STS);
+ mutex_unlock(&pdata->lock);
+
+ return sprintf(buf, "%x\n", (u8)FIELD_GET(PORT_STS_AP1_EVT, v));
+}
+
+static ssize_t
+ap1_event_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ void __iomem *base;
+ bool clear;
+
+ if (kstrtobool(buf, &clear) || !clear)
+ return -EINVAL;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, PORT_FEATURE_ID_HEADER);
+
+ mutex_lock(&pdata->lock);
+ writeq(PORT_STS_AP1_EVT, base + PORT_HDR_STS);
+ mutex_unlock(&pdata->lock);
+
+ return count;
+}
+static DEVICE_ATTR_RW(ap1_event);
+
+static ssize_t
+ap2_event_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ void __iomem *base;
+ u64 v;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, PORT_FEATURE_ID_HEADER);
+
+ mutex_lock(&pdata->lock);
+ v = readq(base + PORT_HDR_STS);
+ mutex_unlock(&pdata->lock);
+
+ return sprintf(buf, "%x\n", (u8)FIELD_GET(PORT_STS_AP2_EVT, v));
+}
+
+static ssize_t
+ap2_event_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ void __iomem *base;
+ bool clear;
+
+ if (kstrtobool(buf, &clear) || !clear)
+ return -EINVAL;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, PORT_FEATURE_ID_HEADER);
+
+ mutex_lock(&pdata->lock);
+ writeq(PORT_STS_AP2_EVT, base + PORT_HDR_STS);
+ mutex_unlock(&pdata->lock);
+
+ return count;
+}
+static DEVICE_ATTR_RW(ap2_event);
+
+static ssize_t
+power_state_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ void __iomem *base;
+ u64 v;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, PORT_FEATURE_ID_HEADER);
+
+ mutex_lock(&pdata->lock);
+ v = readq(base + PORT_HDR_STS);
+ mutex_unlock(&pdata->lock);
+
+ return sprintf(buf, "0x%x\n", (u8)FIELD_GET(PORT_STS_PWR_STATE, v));
+}
+static DEVICE_ATTR_RO(power_state);
+
+static ssize_t
+userclk_freqcmd_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ u64 userclk_freq_cmd;
+ void __iomem *base;
+
+ if (kstrtou64(buf, 0, &userclk_freq_cmd))
+ return -EINVAL;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, PORT_FEATURE_ID_HEADER);
+
+ mutex_lock(&pdata->lock);
+ writeq(userclk_freq_cmd, base + PORT_HDR_USRCLK_CMD0);
+ mutex_unlock(&pdata->lock);
+
+ return count;
+}
+static DEVICE_ATTR_WO(userclk_freqcmd);
+
+static ssize_t
+userclk_freqcntrcmd_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ u64 userclk_freqcntr_cmd;
+ void __iomem *base;
+
+ if (kstrtou64(buf, 0, &userclk_freqcntr_cmd))
+ return -EINVAL;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, PORT_FEATURE_ID_HEADER);
+
+ mutex_lock(&pdata->lock);
+ writeq(userclk_freqcntr_cmd, base + PORT_HDR_USRCLK_CMD1);
+ mutex_unlock(&pdata->lock);
+
+ return count;
+}
+static DEVICE_ATTR_WO(userclk_freqcntrcmd);
+
+static ssize_t
+userclk_freqsts_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ u64 userclk_freqsts;
+ void __iomem *base;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, PORT_FEATURE_ID_HEADER);
+
+ mutex_lock(&pdata->lock);
+ userclk_freqsts = readq(base + PORT_HDR_USRCLK_STS0);
+ mutex_unlock(&pdata->lock);
+
+ return sprintf(buf, "0x%llx\n", (unsigned long long)userclk_freqsts);
+}
+static DEVICE_ATTR_RO(userclk_freqsts);
+
+static ssize_t
+userclk_freqcntrsts_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ u64 userclk_freqcntrsts;
+ void __iomem *base;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, PORT_FEATURE_ID_HEADER);
+
+ mutex_lock(&pdata->lock);
+ userclk_freqcntrsts = readq(base + PORT_HDR_USRCLK_STS1);
+ mutex_unlock(&pdata->lock);
+
+ return sprintf(buf, "0x%llx\n",
+ (unsigned long long)userclk_freqcntrsts);
+}
+static DEVICE_ATTR_RO(userclk_freqcntrsts);
+
+static struct attribute *port_hdr_attrs[] = {
&dev_attr_id.attr,
+ &dev_attr_ltr.attr,
+ &dev_attr_ap1_event.attr,
+ &dev_attr_ap2_event.attr,
+ &dev_attr_power_state.attr,
+ &dev_attr_userclk_freqcmd.attr,
+ &dev_attr_userclk_freqcntrcmd.attr,
+ &dev_attr_userclk_freqsts.attr,
+ &dev_attr_userclk_freqcntrsts.attr,
NULL,
};
-static int port_hdr_init(struct platform_device *pdev,
- struct dfl_feature *feature)
+static umode_t port_hdr_attrs_visible(struct kobject *kobj,
+ struct attribute *attr, int n)
{
- dev_dbg(&pdev->dev, "PORT HDR Init.\n");
+ struct device *dev = kobj_to_dev(kobj);
+ umode_t mode = attr->mode;
+ void __iomem *base;
- port_reset(pdev);
+ base = dfl_get_feature_ioaddr_by_id(dev, PORT_FEATURE_ID_HEADER);
+
+ if (dfl_feature_revision(base) > 0) {
+ /*
+ * userclk sysfs interfaces are only visible in case port
+ * revision is 0, as hardware with revision >0 doesn't
+ * support this.
+ */
+ if (attr == &dev_attr_userclk_freqcmd.attr ||
+ attr == &dev_attr_userclk_freqcntrcmd.attr ||
+ attr == &dev_attr_userclk_freqsts.attr ||
+ attr == &dev_attr_userclk_freqcntrsts.attr)
+ mode = 0;
+ }
- return sysfs_create_files(&pdev->dev.kobj, port_hdr_attrs);
+ return mode;
}
-static void port_hdr_uinit(struct platform_device *pdev,
- struct dfl_feature *feature)
+static const struct attribute_group port_hdr_group = {
+ .attrs = port_hdr_attrs,
+ .is_visible = port_hdr_attrs_visible,
+};
+
+static int port_hdr_init(struct platform_device *pdev,
+ struct dfl_feature *feature)
{
- dev_dbg(&pdev->dev, "PORT HDR UInit.\n");
+ port_reset(pdev);
- sysfs_remove_files(&pdev->dev.kobj, port_hdr_attrs);
+ return 0;
}
static long
@@ -185,9 +429,13 @@ port_hdr_ioctl(struct platform_device *pdev, struct dfl_feature *feature,
return ret;
}
+static const struct dfl_feature_id port_hdr_id_table[] = {
+ {.id = PORT_FEATURE_ID_HEADER,},
+ {0,}
+};
+
static const struct dfl_feature_ops port_hdr_ops = {
.init = port_hdr_init,
- .uinit = port_hdr_uinit,
.ioctl = port_hdr_ioctl,
};
@@ -214,52 +462,91 @@ afu_id_show(struct device *dev, struct device_attribute *attr, char *buf)
}
static DEVICE_ATTR_RO(afu_id);
-static const struct attribute *port_afu_attrs[] = {
+static struct attribute *port_afu_attrs[] = {
&dev_attr_afu_id.attr,
NULL
};
+static umode_t port_afu_attrs_visible(struct kobject *kobj,
+ struct attribute *attr, int n)
+{
+ struct device *dev = kobj_to_dev(kobj);
+
+ /*
+ * sysfs entries are visible only if related private feature is
+ * enumerated.
+ */
+ if (!dfl_get_feature_by_id(dev, PORT_FEATURE_ID_AFU))
+ return 0;
+
+ return attr->mode;
+}
+
+static const struct attribute_group port_afu_group = {
+ .attrs = port_afu_attrs,
+ .is_visible = port_afu_attrs_visible,
+};
+
static int port_afu_init(struct platform_device *pdev,
struct dfl_feature *feature)
{
struct resource *res = &pdev->resource[feature->resource_index];
- int ret;
- dev_dbg(&pdev->dev, "PORT AFU Init.\n");
+ return afu_mmio_region_add(dev_get_platdata(&pdev->dev),
+ DFL_PORT_REGION_INDEX_AFU,
+ resource_size(res), res->start,
+ DFL_PORT_REGION_MMAP | DFL_PORT_REGION_READ |
+ DFL_PORT_REGION_WRITE);
+}
- ret = afu_mmio_region_add(dev_get_platdata(&pdev->dev),
- DFL_PORT_REGION_INDEX_AFU, resource_size(res),
- res->start, DFL_PORT_REGION_READ |
- DFL_PORT_REGION_WRITE | DFL_PORT_REGION_MMAP);
- if (ret)
- return ret;
+static const struct dfl_feature_id port_afu_id_table[] = {
+ {.id = PORT_FEATURE_ID_AFU,},
+ {0,}
+};
- return sysfs_create_files(&pdev->dev.kobj, port_afu_attrs);
-}
+static const struct dfl_feature_ops port_afu_ops = {
+ .init = port_afu_init,
+};
-static void port_afu_uinit(struct platform_device *pdev,
- struct dfl_feature *feature)
+static int port_stp_init(struct platform_device *pdev,
+ struct dfl_feature *feature)
{
- dev_dbg(&pdev->dev, "PORT AFU UInit.\n");
+ struct resource *res = &pdev->resource[feature->resource_index];
- sysfs_remove_files(&pdev->dev.kobj, port_afu_attrs);
+ return afu_mmio_region_add(dev_get_platdata(&pdev->dev),
+ DFL_PORT_REGION_INDEX_STP,
+ resource_size(res), res->start,
+ DFL_PORT_REGION_MMAP | DFL_PORT_REGION_READ |
+ DFL_PORT_REGION_WRITE);
}
-static const struct dfl_feature_ops port_afu_ops = {
- .init = port_afu_init,
- .uinit = port_afu_uinit,
+static const struct dfl_feature_id port_stp_id_table[] = {
+ {.id = PORT_FEATURE_ID_STP,},
+ {0,}
+};
+
+static const struct dfl_feature_ops port_stp_ops = {
+ .init = port_stp_init,
};
static struct dfl_feature_driver port_feature_drvs[] = {
{
- .id = PORT_FEATURE_ID_HEADER,
+ .id_table = port_hdr_id_table,
.ops = &port_hdr_ops,
},
{
- .id = PORT_FEATURE_ID_AFU,
+ .id_table = port_afu_id_table,
.ops = &port_afu_ops,
},
{
+ .id_table = port_err_id_table,
+ .ops = &port_err_ops,
+ },
+ {
+ .id_table = port_stp_id_table,
+ .ops = &port_stp_ops,
+ },
+ {
.ops = NULL,
}
};
@@ -545,9 +832,9 @@ static int port_enable_set(struct platform_device *pdev, bool enable)
mutex_lock(&pdata->lock);
if (enable)
- port_enable(pdev);
+ __afu_port_enable(pdev);
else
- ret = port_disable(pdev);
+ ret = __afu_port_disable(pdev);
mutex_unlock(&pdata->lock);
return ret;
@@ -599,9 +886,17 @@ static int afu_remove(struct platform_device *pdev)
return 0;
}
+static const struct attribute_group *afu_dev_groups[] = {
+ &port_hdr_group,
+ &port_afu_group,
+ &port_err_group,
+ NULL
+};
+
static struct platform_driver afu_driver = {
.driver = {
- .name = DFL_FPGA_FEATURE_DEV_PORT,
+ .name = DFL_FPGA_FEATURE_DEV_PORT,
+ .dev_groups = afu_dev_groups,
},
.probe = afu_probe,
.remove = afu_remove,
diff --git a/drivers/fpga/dfl-afu.h b/drivers/fpga/dfl-afu.h
index 0c7630ae3cda..576e94960086 100644
--- a/drivers/fpga/dfl-afu.h
+++ b/drivers/fpga/dfl-afu.h
@@ -79,6 +79,10 @@ struct dfl_afu {
struct dfl_feature_platform_data *pdata;
};
+/* hold pdata->lock when call __afu_port_enable/disable */
+void __afu_port_enable(struct platform_device *pdev);
+int __afu_port_disable(struct platform_device *pdev);
+
void afu_mmio_region_init(struct dfl_feature_platform_data *pdata);
int afu_mmio_region_add(struct dfl_feature_platform_data *pdata,
u32 region_index, u64 region_size, u64 phys, u32 flags);
@@ -97,4 +101,9 @@ int afu_dma_unmap_region(struct dfl_feature_platform_data *pdata, u64 iova);
struct dfl_afu_dma_region *
afu_dma_region_find(struct dfl_feature_platform_data *pdata,
u64 iova, u64 size);
+
+extern const struct dfl_feature_ops port_err_ops;
+extern const struct dfl_feature_id port_err_id_table[];
+extern const struct attribute_group port_err_group;
+
#endif /* __DFL_AFU_H */
diff --git a/drivers/fpga/dfl-fme-error.c b/drivers/fpga/dfl-fme-error.c
new file mode 100644
index 000000000000..f897d414b923
--- /dev/null
+++ b/drivers/fpga/dfl-fme-error.c
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for FPGA Management Engine Error Management
+ *
+ * Copyright 2019 Intel Corporation, Inc.
+ *
+ * Authors:
+ * Kang Luwei <luwei.kang@intel.com>
+ * Xiao Guangrong <guangrong.xiao@linux.intel.com>
+ * Wu Hao <hao.wu@intel.com>
+ * Joseph Grecco <joe.grecco@intel.com>
+ * Enno Luebbers <enno.luebbers@intel.com>
+ * Tim Whisonant <tim.whisonant@intel.com>
+ * Ananda Ravuri <ananda.ravuri@intel.com>
+ * Mitchel, Henry <henry.mitchel@intel.com>
+ */
+
+#include <linux/uaccess.h>
+
+#include "dfl.h"
+#include "dfl-fme.h"
+
+#define FME_ERROR_MASK 0x8
+#define FME_ERROR 0x10
+#define MBP_ERROR BIT_ULL(6)
+#define PCIE0_ERROR_MASK 0x18
+#define PCIE0_ERROR 0x20
+#define PCIE1_ERROR_MASK 0x28
+#define PCIE1_ERROR 0x30
+#define FME_FIRST_ERROR 0x38
+#define FME_NEXT_ERROR 0x40
+#define RAS_NONFAT_ERROR_MASK 0x48
+#define RAS_NONFAT_ERROR 0x50
+#define RAS_CATFAT_ERROR_MASK 0x58
+#define RAS_CATFAT_ERROR 0x60
+#define RAS_ERROR_INJECT 0x68
+#define INJECT_ERROR_MASK GENMASK_ULL(2, 0)
+
+#define ERROR_MASK GENMASK_ULL(63, 0)
+
+static ssize_t pcie0_errors_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ void __iomem *base;
+ u64 value;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, FME_FEATURE_ID_GLOBAL_ERR);
+
+ mutex_lock(&pdata->lock);
+ value = readq(base + PCIE0_ERROR);
+ mutex_unlock(&pdata->lock);
+
+ return sprintf(buf, "0x%llx\n", (unsigned long long)value);
+}
+
+static ssize_t pcie0_errors_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ void __iomem *base;
+ int ret = 0;
+ u64 v, val;
+
+ if (kstrtou64(buf, 0, &val))
+ return -EINVAL;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, FME_FEATURE_ID_GLOBAL_ERR);
+
+ mutex_lock(&pdata->lock);
+ writeq(GENMASK_ULL(63, 0), base + PCIE0_ERROR_MASK);
+
+ v = readq(base + PCIE0_ERROR);
+ if (val == v)
+ writeq(v, base + PCIE0_ERROR);
+ else
+ ret = -EINVAL;
+
+ writeq(0ULL, base + PCIE0_ERROR_MASK);
+ mutex_unlock(&pdata->lock);
+ return ret ? ret : count;
+}
+static DEVICE_ATTR_RW(pcie0_errors);
+
+static ssize_t pcie1_errors_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ void __iomem *base;
+ u64 value;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, FME_FEATURE_ID_GLOBAL_ERR);
+
+ mutex_lock(&pdata->lock);
+ value = readq(base + PCIE1_ERROR);
+ mutex_unlock(&pdata->lock);
+
+ return sprintf(buf, "0x%llx\n", (unsigned long long)value);
+}
+
+static ssize_t pcie1_errors_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ void __iomem *base;
+ int ret = 0;
+ u64 v, val;
+
+ if (kstrtou64(buf, 0, &val))
+ return -EINVAL;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, FME_FEATURE_ID_GLOBAL_ERR);
+
+ mutex_lock(&pdata->lock);
+ writeq(GENMASK_ULL(63, 0), base + PCIE1_ERROR_MASK);
+
+ v = readq(base + PCIE1_ERROR);
+ if (val == v)
+ writeq(v, base + PCIE1_ERROR);
+ else
+ ret = -EINVAL;
+
+ writeq(0ULL, base + PCIE1_ERROR_MASK);
+ mutex_unlock(&pdata->lock);
+ return ret ? ret : count;
+}
+static DEVICE_ATTR_RW(pcie1_errors);
+
+static ssize_t nonfatal_errors_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ void __iomem *base;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, FME_FEATURE_ID_GLOBAL_ERR);
+
+ return sprintf(buf, "0x%llx\n",
+ (unsigned long long)readq(base + RAS_NONFAT_ERROR));
+}
+static DEVICE_ATTR_RO(nonfatal_errors);
+
+static ssize_t catfatal_errors_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ void __iomem *base;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, FME_FEATURE_ID_GLOBAL_ERR);
+
+ return sprintf(buf, "0x%llx\n",
+ (unsigned long long)readq(base + RAS_CATFAT_ERROR));
+}
+static DEVICE_ATTR_RO(catfatal_errors);
+
+static ssize_t inject_errors_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ void __iomem *base;
+ u64 v;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, FME_FEATURE_ID_GLOBAL_ERR);
+
+ mutex_lock(&pdata->lock);
+ v = readq(base + RAS_ERROR_INJECT);
+ mutex_unlock(&pdata->lock);
+
+ return sprintf(buf, "0x%llx\n",
+ (unsigned long long)FIELD_GET(INJECT_ERROR_MASK, v));
+}
+
+static ssize_t inject_errors_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ void __iomem *base;
+ u8 inject_error;
+ u64 v;
+
+ if (kstrtou8(buf, 0, &inject_error))
+ return -EINVAL;
+
+ if (inject_error & ~INJECT_ERROR_MASK)
+ return -EINVAL;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, FME_FEATURE_ID_GLOBAL_ERR);
+
+ mutex_lock(&pdata->lock);
+ v = readq(base + RAS_ERROR_INJECT);
+ v &= ~INJECT_ERROR_MASK;
+ v |= FIELD_PREP(INJECT_ERROR_MASK, inject_error);
+ writeq(v, base + RAS_ERROR_INJECT);
+ mutex_unlock(&pdata->lock);
+
+ return count;
+}
+static DEVICE_ATTR_RW(inject_errors);
+
+static ssize_t fme_errors_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ void __iomem *base;
+ u64 value;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, FME_FEATURE_ID_GLOBAL_ERR);
+
+ mutex_lock(&pdata->lock);
+ value = readq(base + FME_ERROR);
+ mutex_unlock(&pdata->lock);
+
+ return sprintf(buf, "0x%llx\n", (unsigned long long)value);
+}
+
+static ssize_t fme_errors_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ void __iomem *base;
+ u64 v, val;
+ int ret = 0;
+
+ if (kstrtou64(buf, 0, &val))
+ return -EINVAL;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, FME_FEATURE_ID_GLOBAL_ERR);
+
+ mutex_lock(&pdata->lock);
+ writeq(GENMASK_ULL(63, 0), base + FME_ERROR_MASK);
+
+ v = readq(base + FME_ERROR);
+ if (val == v)
+ writeq(v, base + FME_ERROR);
+ else
+ ret = -EINVAL;
+
+ /* Workaround: disable MBP_ERROR if feature revision is 0 */
+ writeq(dfl_feature_revision(base) ? 0ULL : MBP_ERROR,
+ base + FME_ERROR_MASK);
+ mutex_unlock(&pdata->lock);
+ return ret ? ret : count;
+}
+static DEVICE_ATTR_RW(fme_errors);
+
+static ssize_t first_error_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ void __iomem *base;
+ u64 value;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, FME_FEATURE_ID_GLOBAL_ERR);
+
+ mutex_lock(&pdata->lock);
+ value = readq(base + FME_FIRST_ERROR);
+ mutex_unlock(&pdata->lock);
+
+ return sprintf(buf, "0x%llx\n", (unsigned long long)value);
+}
+static DEVICE_ATTR_RO(first_error);
+
+static ssize_t next_error_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ void __iomem *base;
+ u64 value;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, FME_FEATURE_ID_GLOBAL_ERR);
+
+ mutex_lock(&pdata->lock);
+ value = readq(base + FME_NEXT_ERROR);
+ mutex_unlock(&pdata->lock);
+
+ return sprintf(buf, "0x%llx\n", (unsigned long long)value);
+}
+static DEVICE_ATTR_RO(next_error);
+
+static struct attribute *fme_global_err_attrs[] = {
+ &dev_attr_pcie0_errors.attr,
+ &dev_attr_pcie1_errors.attr,
+ &dev_attr_nonfatal_errors.attr,
+ &dev_attr_catfatal_errors.attr,
+ &dev_attr_inject_errors.attr,
+ &dev_attr_fme_errors.attr,
+ &dev_attr_first_error.attr,
+ &dev_attr_next_error.attr,
+ NULL,
+};
+
+static umode_t fme_global_err_attrs_visible(struct kobject *kobj,
+ struct attribute *attr, int n)
+{
+ struct device *dev = kobj_to_dev(kobj);
+
+ /*
+ * sysfs entries are visible only if related private feature is
+ * enumerated.
+ */
+ if (!dfl_get_feature_by_id(dev, FME_FEATURE_ID_GLOBAL_ERR))
+ return 0;
+
+ return attr->mode;
+}
+
+const struct attribute_group fme_global_err_group = {
+ .name = "errors",
+ .attrs = fme_global_err_attrs,
+ .is_visible = fme_global_err_attrs_visible,
+};
+
+static void fme_err_mask(struct device *dev, bool mask)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(dev);
+ void __iomem *base;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, FME_FEATURE_ID_GLOBAL_ERR);
+
+ mutex_lock(&pdata->lock);
+
+ /* Workaround: keep MBP_ERROR always masked if revision is 0 */
+ if (dfl_feature_revision(base))
+ writeq(mask ? ERROR_MASK : 0, base + FME_ERROR_MASK);
+ else
+ writeq(mask ? ERROR_MASK : MBP_ERROR, base + FME_ERROR_MASK);
+
+ writeq(mask ? ERROR_MASK : 0, base + PCIE0_ERROR_MASK);
+ writeq(mask ? ERROR_MASK : 0, base + PCIE1_ERROR_MASK);
+ writeq(mask ? ERROR_MASK : 0, base + RAS_NONFAT_ERROR_MASK);
+ writeq(mask ? ERROR_MASK : 0, base + RAS_CATFAT_ERROR_MASK);
+
+ mutex_unlock(&pdata->lock);
+}
+
+static int fme_global_err_init(struct platform_device *pdev,
+ struct dfl_feature *feature)
+{
+ fme_err_mask(&pdev->dev, false);
+
+ return 0;
+}
+
+static void fme_global_err_uinit(struct platform_device *pdev,
+ struct dfl_feature *feature)
+{
+ fme_err_mask(&pdev->dev, true);
+}
+
+const struct dfl_feature_id fme_global_err_id_table[] = {
+ {.id = FME_FEATURE_ID_GLOBAL_ERR,},
+ {0,}
+};
+
+const struct dfl_feature_ops fme_global_err_ops = {
+ .init = fme_global_err_init,
+ .uinit = fme_global_err_uinit,
+};
diff --git a/drivers/fpga/dfl-fme-main.c b/drivers/fpga/dfl-fme-main.c
index 086ad2420ade..4d78e182878f 100644
--- a/drivers/fpga/dfl-fme-main.c
+++ b/drivers/fpga/dfl-fme-main.c
@@ -16,6 +16,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/uaccess.h>
#include <linux/fpga-dfl.h>
#include "dfl.h"
@@ -72,50 +73,126 @@ static ssize_t bitstream_metadata_show(struct device *dev,
}
static DEVICE_ATTR_RO(bitstream_metadata);
-static const struct attribute *fme_hdr_attrs[] = {
+static ssize_t cache_size_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ void __iomem *base;
+ u64 v;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, FME_FEATURE_ID_HEADER);
+
+ v = readq(base + FME_HDR_CAP);
+
+ return sprintf(buf, "%u\n",
+ (unsigned int)FIELD_GET(FME_CAP_CACHE_SIZE, v));
+}
+static DEVICE_ATTR_RO(cache_size);
+
+static ssize_t fabric_version_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ void __iomem *base;
+ u64 v;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, FME_FEATURE_ID_HEADER);
+
+ v = readq(base + FME_HDR_CAP);
+
+ return sprintf(buf, "%u\n",
+ (unsigned int)FIELD_GET(FME_CAP_FABRIC_VERID, v));
+}
+static DEVICE_ATTR_RO(fabric_version);
+
+static ssize_t socket_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ void __iomem *base;
+ u64 v;
+
+ base = dfl_get_feature_ioaddr_by_id(dev, FME_FEATURE_ID_HEADER);
+
+ v = readq(base + FME_HDR_CAP);
+
+ return sprintf(buf, "%u\n",
+ (unsigned int)FIELD_GET(FME_CAP_SOCKET_ID, v));
+}
+static DEVICE_ATTR_RO(socket_id);
+
+static struct attribute *fme_hdr_attrs[] = {
&dev_attr_ports_num.attr,
&dev_attr_bitstream_id.attr,
&dev_attr_bitstream_metadata.attr,
+ &dev_attr_cache_size.attr,
+ &dev_attr_fabric_version.attr,
+ &dev_attr_socket_id.attr,
NULL,
};
-static int fme_hdr_init(struct platform_device *pdev,
- struct dfl_feature *feature)
+static const struct attribute_group fme_hdr_group = {
+ .attrs = fme_hdr_attrs,
+};
+
+static long fme_hdr_ioctl_release_port(struct dfl_feature_platform_data *pdata,
+ unsigned long arg)
{
- void __iomem *base = feature->ioaddr;
- int ret;
+ struct dfl_fpga_cdev *cdev = pdata->dfl_cdev;
+ int port_id;
- dev_dbg(&pdev->dev, "FME HDR Init.\n");
- dev_dbg(&pdev->dev, "FME cap %llx.\n",
- (unsigned long long)readq(base + FME_HDR_CAP));
+ if (get_user(port_id, (int __user *)arg))
+ return -EFAULT;
- ret = sysfs_create_files(&pdev->dev.kobj, fme_hdr_attrs);
- if (ret)
- return ret;
+ return dfl_fpga_cdev_release_port(cdev, port_id);
+}
- return 0;
+static long fme_hdr_ioctl_assign_port(struct dfl_feature_platform_data *pdata,
+ unsigned long arg)
+{
+ struct dfl_fpga_cdev *cdev = pdata->dfl_cdev;
+ int port_id;
+
+ if (get_user(port_id, (int __user *)arg))
+ return -EFAULT;
+
+ return dfl_fpga_cdev_assign_port(cdev, port_id);
}
-static void fme_hdr_uinit(struct platform_device *pdev,
- struct dfl_feature *feature)
+static long fme_hdr_ioctl(struct platform_device *pdev,
+ struct dfl_feature *feature,
+ unsigned int cmd, unsigned long arg)
{
- dev_dbg(&pdev->dev, "FME HDR UInit.\n");
- sysfs_remove_files(&pdev->dev.kobj, fme_hdr_attrs);
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(&pdev->dev);
+
+ switch (cmd) {
+ case DFL_FPGA_FME_PORT_RELEASE:
+ return fme_hdr_ioctl_release_port(pdata, arg);
+ case DFL_FPGA_FME_PORT_ASSIGN:
+ return fme_hdr_ioctl_assign_port(pdata, arg);
+ }
+
+ return -ENODEV;
}
+static const struct dfl_feature_id fme_hdr_id_table[] = {
+ {.id = FME_FEATURE_ID_HEADER,},
+ {0,}
+};
+
static const struct dfl_feature_ops fme_hdr_ops = {
- .init = fme_hdr_init,
- .uinit = fme_hdr_uinit,
+ .ioctl = fme_hdr_ioctl,
};
static struct dfl_feature_driver fme_feature_drvs[] = {
{
- .id = FME_FEATURE_ID_HEADER,
+ .id_table = fme_hdr_id_table,
.ops = &fme_hdr_ops,
},
{
- .id = FME_FEATURE_ID_PR_MGMT,
- .ops = &pr_mgmt_ops,
+ .id_table = fme_pr_mgmt_id_table,
+ .ops = &fme_pr_mgmt_ops,
+ },
+ {
+ .id_table = fme_global_err_id_table,
+ .ops = &fme_global_err_ops,
},
{
.ops = NULL,
@@ -263,9 +340,16 @@ static int fme_remove(struct platform_device *pdev)
return 0;
}
+static const struct attribute_group *fme_dev_groups[] = {
+ &fme_hdr_group,
+ &fme_global_err_group,
+ NULL
+};
+
static struct platform_driver fme_driver = {
.driver = {
- .name = DFL_FPGA_FEATURE_DEV_FME,
+ .name = DFL_FPGA_FEATURE_DEV_FME,
+ .dev_groups = fme_dev_groups,
},
.probe = fme_probe,
.remove = fme_remove,
diff --git a/drivers/fpga/dfl-fme-pr.c b/drivers/fpga/dfl-fme-pr.c
index 3c71dc3faaf5..a233a53db708 100644
--- a/drivers/fpga/dfl-fme-pr.c
+++ b/drivers/fpga/dfl-fme-pr.c
@@ -470,7 +470,12 @@ static long fme_pr_ioctl(struct platform_device *pdev,
return ret;
}
-const struct dfl_feature_ops pr_mgmt_ops = {
+const struct dfl_feature_id fme_pr_mgmt_id_table[] = {
+ {.id = FME_FEATURE_ID_PR_MGMT,},
+ {0}
+};
+
+const struct dfl_feature_ops fme_pr_mgmt_ops = {
.init = pr_mgmt_init,
.uinit = pr_mgmt_uinit,
.ioctl = fme_pr_ioctl,
diff --git a/drivers/fpga/dfl-fme.h b/drivers/fpga/dfl-fme.h
index 5394a216c5c0..6685c8ef965b 100644
--- a/drivers/fpga/dfl-fme.h
+++ b/drivers/fpga/dfl-fme.h
@@ -33,6 +33,10 @@ struct dfl_fme {
struct dfl_feature_platform_data *pdata;
};
-extern const struct dfl_feature_ops pr_mgmt_ops;
+extern const struct dfl_feature_ops fme_pr_mgmt_ops;
+extern const struct dfl_feature_id fme_pr_mgmt_id_table[];
+extern const struct dfl_feature_ops fme_global_err_ops;
+extern const struct dfl_feature_id fme_global_err_id_table[];
+extern const struct attribute_group fme_global_err_group;
#endif /* __DFL_FME_H */
diff --git a/drivers/fpga/dfl-pci.c b/drivers/fpga/dfl-pci.c
index 66b5720582bb..89ca292236ad 100644
--- a/drivers/fpga/dfl-pci.c
+++ b/drivers/fpga/dfl-pci.c
@@ -223,8 +223,43 @@ disable_error_report_exit:
return ret;
}
+static int cci_pci_sriov_configure(struct pci_dev *pcidev, int num_vfs)
+{
+ struct cci_drvdata *drvdata = pci_get_drvdata(pcidev);
+ struct dfl_fpga_cdev *cdev = drvdata->cdev;
+ int ret = 0;
+
+ if (!num_vfs) {
+ /*
+ * disable SRIOV and then put released ports back to default
+ * PF access mode.
+ */
+ pci_disable_sriov(pcidev);
+
+ dfl_fpga_cdev_config_ports_pf(cdev);
+
+ } else {
+ /*
+ * before enable SRIOV, put released ports into VF access mode
+ * first of all.
+ */
+ ret = dfl_fpga_cdev_config_ports_vf(cdev, num_vfs);
+ if (ret)
+ return ret;
+
+ ret = pci_enable_sriov(pcidev, num_vfs);
+ if (ret)
+ dfl_fpga_cdev_config_ports_pf(cdev);
+ }
+
+ return ret;
+}
+
static void cci_pci_remove(struct pci_dev *pcidev)
{
+ if (dev_is_pf(&pcidev->dev))
+ cci_pci_sriov_configure(pcidev, 0);
+
cci_remove_feature_devs(pcidev);
pci_disable_pcie_error_reporting(pcidev);
}
@@ -234,6 +269,7 @@ static struct pci_driver cci_pci_driver = {
.id_table = cci_pcie_id_tbl,
.probe = cci_pci_probe,
.remove = cci_pci_remove,
+ .sriov_configure = cci_pci_sriov_configure,
};
module_pci_driver(cci_pci_driver);
diff --git a/drivers/fpga/dfl.c b/drivers/fpga/dfl.c
index 4b66aaa32b5a..96a2b8274a33 100644
--- a/drivers/fpga/dfl.c
+++ b/drivers/fpga/dfl.c
@@ -231,16 +231,20 @@ EXPORT_SYMBOL_GPL(dfl_fpga_port_ops_del);
*/
int dfl_fpga_check_port_id(struct platform_device *pdev, void *pport_id)
{
- struct dfl_fpga_port_ops *port_ops = dfl_fpga_port_ops_get(pdev);
- int port_id;
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct dfl_fpga_port_ops *port_ops;
+
+ if (pdata->id != FEATURE_DEV_ID_UNUSED)
+ return pdata->id == *(int *)pport_id;
+ port_ops = dfl_fpga_port_ops_get(pdev);
if (!port_ops || !port_ops->get_id)
return 0;
- port_id = port_ops->get_id(pdev);
+ pdata->id = port_ops->get_id(pdev);
dfl_fpga_port_ops_put(port_ops);
- return port_id == *(int *)pport_id;
+ return pdata->id == *(int *)pport_id;
}
EXPORT_SYMBOL_GPL(dfl_fpga_check_port_id);
@@ -255,7 +259,8 @@ void dfl_fpga_dev_feature_uinit(struct platform_device *pdev)
dfl_fpga_dev_for_each_feature(pdata, feature)
if (feature->ops) {
- feature->ops->uinit(pdev, feature);
+ if (feature->ops->uinit)
+ feature->ops->uinit(pdev, feature);
feature->ops = NULL;
}
}
@@ -266,17 +271,34 @@ static int dfl_feature_instance_init(struct platform_device *pdev,
struct dfl_feature *feature,
struct dfl_feature_driver *drv)
{
- int ret;
+ int ret = 0;
- ret = drv->ops->init(pdev, feature);
- if (ret)
- return ret;
+ if (drv->ops->init) {
+ ret = drv->ops->init(pdev, feature);
+ if (ret)
+ return ret;
+ }
feature->ops = drv->ops;
return ret;
}
+static bool dfl_feature_drv_match(struct dfl_feature *feature,
+ struct dfl_feature_driver *driver)
+{
+ const struct dfl_feature_id *ids = driver->id_table;
+
+ if (ids) {
+ while (ids->id) {
+ if (ids->id == feature->id)
+ return true;
+ ids++;
+ }
+ }
+ return false;
+}
+
/**
* dfl_fpga_dev_feature_init - init for sub features of dfl feature device
* @pdev: feature device.
@@ -297,8 +319,7 @@ int dfl_fpga_dev_feature_init(struct platform_device *pdev,
while (drv->ops) {
dfl_fpga_dev_for_each_feature(pdata, feature) {
- /* match feature and drv using id */
- if (feature->id == drv->id) {
+ if (dfl_feature_drv_match(feature, drv)) {
ret = dfl_feature_instance_init(pdev, pdata,
feature, drv);
if (ret)
@@ -474,6 +495,7 @@ static int build_info_commit_dev(struct build_feature_devs_info *binfo)
pdata->dev = fdev;
pdata->num = binfo->feature_num;
pdata->dfl_cdev = binfo->cdev;
+ pdata->id = FEATURE_DEV_ID_UNUSED;
mutex_init(&pdata->lock);
lockdep_set_class_and_name(&pdata->lock, &dfl_pdata_keys[type],
dfl_pdata_key_strings[type]);
@@ -973,25 +995,27 @@ void dfl_fpga_feature_devs_remove(struct dfl_fpga_cdev *cdev)
{
struct dfl_feature_platform_data *pdata, *ptmp;
- remove_feature_devs(cdev);
-
mutex_lock(&cdev->lock);
- if (cdev->fme_dev) {
- /* the fme should be unregistered. */
- WARN_ON(device_is_registered(cdev->fme_dev));
+ if (cdev->fme_dev)
put_device(cdev->fme_dev);
- }
list_for_each_entry_safe(pdata, ptmp, &cdev->port_dev_list, node) {
struct platform_device *port_dev = pdata->dev;
- /* the port should be unregistered. */
- WARN_ON(device_is_registered(&port_dev->dev));
+ /* remove released ports */
+ if (!device_is_registered(&port_dev->dev)) {
+ dfl_id_free(feature_dev_id_type(port_dev),
+ port_dev->id);
+ platform_device_put(port_dev);
+ }
+
list_del(&pdata->node);
put_device(&port_dev->dev);
}
mutex_unlock(&cdev->lock);
+ remove_feature_devs(cdev);
+
fpga_region_unregister(cdev->region);
devm_kfree(cdev->parent, cdev);
}
@@ -1042,6 +1066,170 @@ static int __init dfl_fpga_init(void)
return ret;
}
+/**
+ * dfl_fpga_cdev_release_port - release a port platform device
+ *
+ * @cdev: parent container device.
+ * @port_id: id of the port platform device.
+ *
+ * This function allows user to release a port platform device. This is a
+ * mandatory step before turn a port from PF into VF for SRIOV support.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+int dfl_fpga_cdev_release_port(struct dfl_fpga_cdev *cdev, int port_id)
+{
+ struct platform_device *port_pdev;
+ int ret = -ENODEV;
+
+ mutex_lock(&cdev->lock);
+ port_pdev = __dfl_fpga_cdev_find_port(cdev, &port_id,
+ dfl_fpga_check_port_id);
+ if (!port_pdev)
+ goto unlock_exit;
+
+ if (!device_is_registered(&port_pdev->dev)) {
+ ret = -EBUSY;
+ goto put_dev_exit;
+ }
+
+ ret = dfl_feature_dev_use_begin(dev_get_platdata(&port_pdev->dev));
+ if (ret)
+ goto put_dev_exit;
+
+ platform_device_del(port_pdev);
+ cdev->released_port_num++;
+put_dev_exit:
+ put_device(&port_pdev->dev);
+unlock_exit:
+ mutex_unlock(&cdev->lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dfl_fpga_cdev_release_port);
+
+/**
+ * dfl_fpga_cdev_assign_port - assign a port platform device back
+ *
+ * @cdev: parent container device.
+ * @port_id: id of the port platform device.
+ *
+ * This function allows user to assign a port platform device back. This is
+ * a mandatory step after disable SRIOV support.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+int dfl_fpga_cdev_assign_port(struct dfl_fpga_cdev *cdev, int port_id)
+{
+ struct platform_device *port_pdev;
+ int ret = -ENODEV;
+
+ mutex_lock(&cdev->lock);
+ port_pdev = __dfl_fpga_cdev_find_port(cdev, &port_id,
+ dfl_fpga_check_port_id);
+ if (!port_pdev)
+ goto unlock_exit;
+
+ if (device_is_registered(&port_pdev->dev)) {
+ ret = -EBUSY;
+ goto put_dev_exit;
+ }
+
+ ret = platform_device_add(port_pdev);
+ if (ret)
+ goto put_dev_exit;
+
+ dfl_feature_dev_use_end(dev_get_platdata(&port_pdev->dev));
+ cdev->released_port_num--;
+put_dev_exit:
+ put_device(&port_pdev->dev);
+unlock_exit:
+ mutex_unlock(&cdev->lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dfl_fpga_cdev_assign_port);
+
+static void config_port_access_mode(struct device *fme_dev, int port_id,
+ bool is_vf)
+{
+ void __iomem *base;
+ u64 v;
+
+ base = dfl_get_feature_ioaddr_by_id(fme_dev, FME_FEATURE_ID_HEADER);
+
+ v = readq(base + FME_HDR_PORT_OFST(port_id));
+
+ v &= ~FME_PORT_OFST_ACC_CTRL;
+ v |= FIELD_PREP(FME_PORT_OFST_ACC_CTRL,
+ is_vf ? FME_PORT_OFST_ACC_VF : FME_PORT_OFST_ACC_PF);
+
+ writeq(v, base + FME_HDR_PORT_OFST(port_id));
+}
+
+#define config_port_vf_mode(dev, id) config_port_access_mode(dev, id, true)
+#define config_port_pf_mode(dev, id) config_port_access_mode(dev, id, false)
+
+/**
+ * dfl_fpga_cdev_config_ports_pf - configure ports to PF access mode
+ *
+ * @cdev: parent container device.
+ *
+ * This function is needed in sriov configuration routine. It could be used to
+ * configure the all released ports from VF access mode to PF.
+ */
+void dfl_fpga_cdev_config_ports_pf(struct dfl_fpga_cdev *cdev)
+{
+ struct dfl_feature_platform_data *pdata;
+
+ mutex_lock(&cdev->lock);
+ list_for_each_entry(pdata, &cdev->port_dev_list, node) {
+ if (device_is_registered(&pdata->dev->dev))
+ continue;
+
+ config_port_pf_mode(cdev->fme_dev, pdata->id);
+ }
+ mutex_unlock(&cdev->lock);
+}
+EXPORT_SYMBOL_GPL(dfl_fpga_cdev_config_ports_pf);
+
+/**
+ * dfl_fpga_cdev_config_ports_vf - configure ports to VF access mode
+ *
+ * @cdev: parent container device.
+ * @num_vfs: VF device number.
+ *
+ * This function is needed in sriov configuration routine. It could be used to
+ * configure the released ports from PF access mode to VF.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+int dfl_fpga_cdev_config_ports_vf(struct dfl_fpga_cdev *cdev, int num_vfs)
+{
+ struct dfl_feature_platform_data *pdata;
+ int ret = 0;
+
+ mutex_lock(&cdev->lock);
+ /*
+ * can't turn multiple ports into 1 VF device, only 1 port for 1 VF
+ * device, so if released port number doesn't match VF device number,
+ * then reject the request with -EINVAL error code.
+ */
+ if (cdev->released_port_num != num_vfs) {
+ ret = -EINVAL;
+ goto done;
+ }
+
+ list_for_each_entry(pdata, &cdev->port_dev_list, node) {
+ if (device_is_registered(&pdata->dev->dev))
+ continue;
+
+ config_port_vf_mode(cdev->fme_dev, pdata->id);
+ }
+done:
+ mutex_unlock(&cdev->lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dfl_fpga_cdev_config_ports_vf);
+
static void __exit dfl_fpga_exit(void)
{
dfl_chardev_uinit();
diff --git a/drivers/fpga/dfl.h b/drivers/fpga/dfl.h
index a8b869e9e5b7..9f0e656de720 100644
--- a/drivers/fpga/dfl.h
+++ b/drivers/fpga/dfl.h
@@ -30,8 +30,8 @@
/* plus one for fme device */
#define MAX_DFL_FEATURE_DEV_NUM (MAX_DFL_FPGA_PORT_NUM + 1)
-/* Reserved 0x0 for Header Group Register and 0xff for AFU */
-#define FEATURE_ID_FIU_HEADER 0x0
+/* Reserved 0xfe for Header Group Register and 0xff for AFU */
+#define FEATURE_ID_FIU_HEADER 0xfe
#define FEATURE_ID_AFU 0xff
#define FME_FEATURE_ID_HEADER FEATURE_ID_FIU_HEADER
@@ -119,6 +119,11 @@
#define PORT_HDR_NEXT_AFU NEXT_AFU
#define PORT_HDR_CAP 0x30
#define PORT_HDR_CTRL 0x38
+#define PORT_HDR_STS 0x40
+#define PORT_HDR_USRCLK_CMD0 0x50
+#define PORT_HDR_USRCLK_CMD1 0x58
+#define PORT_HDR_USRCLK_STS0 0x60
+#define PORT_HDR_USRCLK_STS1 0x68
/* Port Capability Register Bitfield */
#define PORT_CAP_PORT_NUM GENMASK_ULL(1, 0) /* ID of this port */
@@ -130,6 +135,16 @@
/* Latency tolerance reporting. '1' >= 40us, '0' < 40us.*/
#define PORT_CTRL_LATENCY BIT_ULL(2)
#define PORT_CTRL_SFTRST_ACK BIT_ULL(4) /* HW ack for reset */
+
+/* Port Status Register Bitfield */
+#define PORT_STS_AP2_EVT BIT_ULL(13) /* AP2 event detected */
+#define PORT_STS_AP1_EVT BIT_ULL(12) /* AP1 event detected */
+#define PORT_STS_PWR_STATE GENMASK_ULL(11, 8) /* AFU power states */
+#define PORT_STS_PWR_STATE_NORM 0
+#define PORT_STS_PWR_STATE_AP1 1 /* 50% throttling */
+#define PORT_STS_PWR_STATE_AP2 2 /* 90% throttling */
+#define PORT_STS_PWR_STATE_AP6 6 /* 100% throttling */
+
/**
* struct dfl_fpga_port_ops - port ops
*
@@ -154,13 +169,22 @@ void dfl_fpga_port_ops_put(struct dfl_fpga_port_ops *ops);
int dfl_fpga_check_port_id(struct platform_device *pdev, void *pport_id);
/**
- * struct dfl_feature_driver - sub feature's driver
+ * struct dfl_feature_id - dfl private feature id
*
- * @id: sub feature id.
- * @ops: ops of this sub feature.
+ * @id: unique dfl private feature id.
*/
-struct dfl_feature_driver {
+struct dfl_feature_id {
u64 id;
+};
+
+/**
+ * struct dfl_feature_driver - dfl private feature driver
+ *
+ * @id_table: id_table for dfl private features supported by this driver.
+ * @ops: ops of this dfl private feature driver.
+ */
+struct dfl_feature_driver {
+ const struct dfl_feature_id *id_table;
const struct dfl_feature_ops *ops;
};
@@ -183,6 +207,8 @@ struct dfl_feature {
#define DEV_STATUS_IN_USE 0
+#define FEATURE_DEV_ID_UNUSED (-1)
+
/**
* struct dfl_feature_platform_data - platform data for feature devices
*
@@ -191,6 +217,7 @@ struct dfl_feature {
* @cdev: cdev of feature dev.
* @dev: ptr to platform device linked with this platform data.
* @dfl_cdev: ptr to container device.
+ * @id: id used for this feature device.
* @disable_count: count for port disable.
* @num: number for sub features.
* @dev_status: dev status (e.g. DEV_STATUS_IN_USE).
@@ -203,6 +230,7 @@ struct dfl_feature_platform_data {
struct cdev cdev;
struct platform_device *dev;
struct dfl_fpga_cdev *dfl_cdev;
+ int id;
unsigned int disable_count;
unsigned long dev_status;
void *private;
@@ -331,6 +359,11 @@ static inline bool dfl_feature_is_port(void __iomem *base)
(FIELD_GET(DFH_ID, v) == DFH_ID_FIU_PORT);
}
+static inline u8 dfl_feature_revision(void __iomem *base)
+{
+ return (u8)FIELD_GET(DFH_REVISION, readq(base + DFH));
+}
+
/**
* struct dfl_fpga_enum_info - DFL FPGA enumeration information
*
@@ -373,6 +406,7 @@ void dfl_fpga_enum_info_free(struct dfl_fpga_enum_info *info);
* @fme_dev: FME feature device under this container device.
* @lock: mutex lock to protect the port device list.
* @port_dev_list: list of all port feature devices under this container device.
+ * @released_port_num: released port number under this container device.
*/
struct dfl_fpga_cdev {
struct device *parent;
@@ -380,6 +414,7 @@ struct dfl_fpga_cdev {
struct device *fme_dev;
struct mutex lock;
struct list_head port_dev_list;
+ int released_port_num;
};
struct dfl_fpga_cdev *
@@ -407,4 +442,9 @@ dfl_fpga_cdev_find_port(struct dfl_fpga_cdev *cdev, void *data,
return pdev;
}
+
+int dfl_fpga_cdev_release_port(struct dfl_fpga_cdev *cdev, int port_id);
+int dfl_fpga_cdev_assign_port(struct dfl_fpga_cdev *cdev, int port_id);
+void dfl_fpga_cdev_config_ports_pf(struct dfl_fpga_cdev *cdev);
+int dfl_fpga_cdev_config_ports_vf(struct dfl_fpga_cdev *cdev, int num_vf);
#endif /* __FPGA_DFL_H */
diff --git a/drivers/hwtracing/coresight/coresight-cpu-debug.c b/drivers/hwtracing/coresight/coresight-cpu-debug.c
index 2463aa7ab4f6..96544b348c27 100644
--- a/drivers/hwtracing/coresight/coresight-cpu-debug.c
+++ b/drivers/hwtracing/coresight/coresight-cpu-debug.c
@@ -646,24 +646,23 @@ static int debug_remove(struct amba_device *adev)
return 0;
}
+static const struct amba_cs_uci_id uci_id_debug[] = {
+ {
+ /* CPU Debug UCI data */
+ .devarch = 0x47706a15,
+ .devarch_mask = 0xfff0ffff,
+ .devtype = 0x00000015,
+ }
+};
+
static const struct amba_id debug_ids[] = {
- { /* Debug for Cortex-A53 */
- .id = 0x000bbd03,
- .mask = 0x000fffff,
- },
- { /* Debug for Cortex-A57 */
- .id = 0x000bbd07,
- .mask = 0x000fffff,
- },
- { /* Debug for Cortex-A72 */
- .id = 0x000bbd08,
- .mask = 0x000fffff,
- },
- { /* Debug for Cortex-A73 */
- .id = 0x000bbd09,
- .mask = 0x000fffff,
- },
- { 0, 0 },
+ CS_AMBA_ID(0x000bbd03), /* Cortex-A53 */
+ CS_AMBA_ID(0x000bbd07), /* Cortex-A57 */
+ CS_AMBA_ID(0x000bbd08), /* Cortex-A72 */
+ CS_AMBA_ID(0x000bbd09), /* Cortex-A73 */
+ CS_AMBA_UCI_ID(0x000f0205, uci_id_debug), /* Qualcomm Kryo */
+ CS_AMBA_UCI_ID(0x000f0211, uci_id_debug), /* Qualcomm Kryo */
+ {},
};
static struct amba_driver debug_driver = {
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
index a0365e23678e..219c10eb752c 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
@@ -296,11 +296,8 @@ static ssize_t mode_store(struct device *dev,
spin_lock(&drvdata->spinlock);
config->mode = val & ETMv4_MODE_ALL;
-
- if (config->mode & ETM_MODE_EXCLUDE)
- etm4_set_mode_exclude(drvdata, true);
- else
- etm4_set_mode_exclude(drvdata, false);
+ etm4_set_mode_exclude(drvdata,
+ config->mode & ETM_MODE_EXCLUDE ? true : false);
if (drvdata->instrp0 == true) {
/* start by clearing instruction P0 field */
@@ -999,10 +996,8 @@ static ssize_t addr_range_store(struct device *dev,
* Program include or exclude control bits for vinst or vdata
* whenever we change addr comparators to ETM_ADDR_TYPE_RANGE
*/
- if (config->mode & ETM_MODE_EXCLUDE)
- etm4_set_mode_exclude(drvdata, true);
- else
- etm4_set_mode_exclude(drvdata, false);
+ etm4_set_mode_exclude(drvdata,
+ config->mode & ETM_MODE_EXCLUDE ? true : false);
spin_unlock(&drvdata->spinlock);
return size;
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c
index 7bcac8896fc1..a128b5063f46 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x.c
@@ -34,7 +34,8 @@
#include "coresight-etm-perf.h"
static int boot_enable;
-module_param_named(boot_enable, boot_enable, int, S_IRUGO);
+module_param(boot_enable, int, 0444);
+MODULE_PARM_DESC(boot_enable, "Enable tracing on boot");
/* The number of ETMv4 currently registered */
static int etm4_count;
@@ -47,7 +48,7 @@ static enum cpuhp_state hp_online;
static void etm4_os_unlock(struct etmv4_drvdata *drvdata)
{
- /* Writing any value to ETMOSLAR unlocks the trace registers */
+ /* Writing 0 to TRCOSLAR unlocks the trace registers */
writel_relaxed(0x0, drvdata->base + TRCOSLAR);
drvdata->os_unlock = true;
isb();
@@ -188,6 +189,13 @@ static int etm4_enable_hw(struct etmv4_drvdata *drvdata)
dev_err(etm_dev,
"timeout while waiting for Idle Trace Status\n");
+ /*
+ * As recommended by section 4.3.7 ("Synchronization when using the
+ * memory-mapped interface") of ARM IHI 0064D
+ */
+ dsb(sy);
+ isb();
+
done:
CS_LOCK(drvdata->base);
@@ -453,8 +461,12 @@ static void etm4_disable_hw(void *info)
/* EN, bit[0] Trace unit enable bit */
control &= ~0x1;
- /* make sure everything completes before disabling */
- mb();
+ /*
+ * Make sure everything completes before disabling, as recommended
+ * by section 7.3.77 ("TRCVICTLR, ViewInst Main Control Register,
+ * SSTATUS") of ARM IHI 0064D
+ */
+ dsb(sy);
isb();
writel_relaxed(control, drvdata->base + TRCPRGCTLR);
@@ -1047,10 +1059,8 @@ static int etm4_starting_cpu(unsigned int cpu)
return 0;
spin_lock(&etmdrvdata[cpu]->spinlock);
- if (!etmdrvdata[cpu]->os_unlock) {
+ if (!etmdrvdata[cpu]->os_unlock)
etm4_os_unlock(etmdrvdata[cpu]);
- etmdrvdata[cpu]->os_unlock = true;
- }
if (local_read(&etmdrvdata[cpu]->mode))
etm4_enable_hw(etmdrvdata[cpu]);
@@ -1192,11 +1202,15 @@ static struct amba_cs_uci_id uci_id_etm4[] = {
};
static const struct amba_id etm4_ids[] = {
- CS_AMBA_ID(0x000bb95d), /* Cortex-A53 */
- CS_AMBA_ID(0x000bb95e), /* Cortex-A57 */
- CS_AMBA_ID(0x000bb95a), /* Cortex-A72 */
- CS_AMBA_ID(0x000bb959), /* Cortex-A73 */
- CS_AMBA_UCI_ID(0x000bb9da, uci_id_etm4), /* Cortex-A35 */
+ CS_AMBA_ID(0x000bb95d), /* Cortex-A53 */
+ CS_AMBA_ID(0x000bb95e), /* Cortex-A57 */
+ CS_AMBA_ID(0x000bb95a), /* Cortex-A72 */
+ CS_AMBA_ID(0x000bb959), /* Cortex-A73 */
+ CS_AMBA_UCI_ID(0x000bb9da, uci_id_etm4),/* Cortex-A35 */
+ CS_AMBA_UCI_ID(0x000f0205, uci_id_etm4),/* Qualcomm Kryo */
+ CS_AMBA_UCI_ID(0x000f0211, uci_id_etm4),/* Qualcomm Kryo */
+ CS_AMBA_ID(0x000bb802), /* Qualcomm Kryo 385 Cortex-A55 */
+ CS_AMBA_ID(0x000bb803), /* Qualcomm Kryo 385 Cortex-A75 */
{},
};
diff --git a/drivers/hwtracing/coresight/coresight-funnel.c b/drivers/hwtracing/coresight/coresight-funnel.c
index fa97cb9ab4f9..05f7896c3a01 100644
--- a/drivers/hwtracing/coresight/coresight-funnel.c
+++ b/drivers/hwtracing/coresight/coresight-funnel.c
@@ -5,6 +5,7 @@
* Description: CoreSight Funnel driver
*/
+#include <linux/acpi.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
@@ -192,7 +193,7 @@ static int funnel_probe(struct device *dev, struct resource *res)
if (is_of_node(dev_fwnode(dev)) &&
of_device_is_compatible(dev->of_node, "arm,coresight-funnel"))
- pr_warn_once("Uses OBSOLETE CoreSight funnel binding\n");
+ dev_warn_once(dev, "Uses OBSOLETE CoreSight funnel binding\n");
desc.name = coresight_alloc_device_name(&funnel_devs, dev);
if (!desc.name)
@@ -302,11 +303,19 @@ static const struct of_device_id static_funnel_match[] = {
{}
};
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id static_funnel_ids[] = {
+ {"ARMHC9FE", 0},
+ {},
+};
+#endif
+
static struct platform_driver static_funnel_driver = {
.probe = static_funnel_probe,
.driver = {
.name = "coresight-static-funnel",
.of_match_table = static_funnel_match,
+ .acpi_match_table = ACPI_PTR(static_funnel_ids),
.pm = &funnel_dev_pm_ops,
.suppress_bind_attrs = true,
},
diff --git a/drivers/hwtracing/coresight/coresight-priv.h b/drivers/hwtracing/coresight/coresight-priv.h
index 61d7f9ff054d..82e563cdc879 100644
--- a/drivers/hwtracing/coresight/coresight-priv.h
+++ b/drivers/hwtracing/coresight/coresight-priv.h
@@ -185,11 +185,11 @@ static inline int etm_writel_cp14(u32 off, u32 val) { return 0; }
}
/* coresight AMBA ID, full UCI structure: id table entry. */
-#define CS_AMBA_UCI_ID(pid, uci_ptr) \
- { \
- .id = pid, \
- .mask = 0x000fffff, \
- .data = uci_ptr \
+#define CS_AMBA_UCI_ID(pid, uci_ptr) \
+ { \
+ .id = pid, \
+ .mask = 0x000fffff, \
+ .data = (void *)uci_ptr \
}
/* extract the data value from a UCI structure given amba_id pointer. */
diff --git a/drivers/hwtracing/coresight/coresight-replicator.c b/drivers/hwtracing/coresight/coresight-replicator.c
index b7d6d59d56db..b29ba640eb25 100644
--- a/drivers/hwtracing/coresight/coresight-replicator.c
+++ b/drivers/hwtracing/coresight/coresight-replicator.c
@@ -184,7 +184,8 @@ static int replicator_probe(struct device *dev, struct resource *res)
if (is_of_node(dev_fwnode(dev)) &&
of_device_is_compatible(dev->of_node, "arm,coresight-replicator"))
- pr_warn_once("Uses OBSOLETE CoreSight replicator binding\n");
+ dev_warn_once(dev,
+ "Uses OBSOLETE CoreSight replicator binding\n");
desc.name = coresight_alloc_device_name(&replicator_devs, dev);
if (!desc.name)
diff --git a/drivers/hwtracing/coresight/coresight-tmc-etf.c b/drivers/hwtracing/coresight/coresight-tmc-etf.c
index 23b7ff00af5c..807416b75ecc 100644
--- a/drivers/hwtracing/coresight/coresight-tmc-etf.c
+++ b/drivers/hwtracing/coresight/coresight-tmc-etf.c
@@ -479,30 +479,11 @@ static unsigned long tmc_update_etf_buffer(struct coresight_device *csdev,
* traces.
*/
if (!buf->snapshot && to_read > handle->size) {
- u32 mask = 0;
-
- /*
- * The value written to RRP must be byte-address aligned to
- * the width of the trace memory databus _and_ to a frame
- * boundary (16 byte), whichever is the biggest. For example,
- * for 32-bit, 64-bit and 128-bit wide trace memory, the four
- * LSBs must be 0s. For 256-bit wide trace memory, the five
- * LSBs must be 0s.
- */
- switch (drvdata->memwidth) {
- case TMC_MEM_INTF_WIDTH_32BITS:
- case TMC_MEM_INTF_WIDTH_64BITS:
- case TMC_MEM_INTF_WIDTH_128BITS:
- mask = GENMASK(31, 4);
- break;
- case TMC_MEM_INTF_WIDTH_256BITS:
- mask = GENMASK(31, 5);
- break;
- }
+ u32 mask = tmc_get_memwidth_mask(drvdata);
/*
* Make sure the new size is aligned in accordance with the
- * requirement explained above.
+ * requirement explained in function tmc_get_memwidth_mask().
*/
to_read = handle->size & mask;
/* Move the RAM read pointer up */
diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c
index 17006705287a..625882bc8b08 100644
--- a/drivers/hwtracing/coresight/coresight-tmc-etr.c
+++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c
@@ -871,6 +871,7 @@ static struct etr_buf *tmc_alloc_etr_buf(struct tmc_drvdata *drvdata,
return ERR_PTR(rc);
}
+ refcount_set(&etr_buf->refcount, 1);
dev_dbg(dev, "allocated buffer of size %ldKB in mode %d\n",
(unsigned long)size >> 10, etr_buf->mode);
return etr_buf;
@@ -927,15 +928,24 @@ static void tmc_sync_etr_buf(struct tmc_drvdata *drvdata)
rrp = tmc_read_rrp(drvdata);
rwp = tmc_read_rwp(drvdata);
status = readl_relaxed(drvdata->base + TMC_STS);
+
+ /*
+ * If there were memory errors in the session, truncate the
+ * buffer.
+ */
+ if (WARN_ON_ONCE(status & TMC_STS_MEMERR)) {
+ dev_dbg(&drvdata->csdev->dev,
+ "tmc memory error detected, truncating buffer\n");
+ etr_buf->len = 0;
+ etr_buf->full = 0;
+ return;
+ }
+
etr_buf->full = status & TMC_STS_FULL;
WARN_ON(!etr_buf->ops || !etr_buf->ops->sync);
etr_buf->ops->sync(etr_buf, rrp, rwp);
-
- /* Insert barrier packets at the beginning, if there was an overflow */
- if (etr_buf->full)
- tmc_etr_buf_insert_barrier_packet(etr_buf, etr_buf->offset);
}
static void __tmc_etr_enable_hw(struct tmc_drvdata *drvdata)
@@ -1072,6 +1082,13 @@ static void tmc_etr_sync_sysfs_buf(struct tmc_drvdata *drvdata)
drvdata->sysfs_buf = NULL;
} else {
tmc_sync_etr_buf(drvdata);
+ /*
+ * Insert barrier packets at the beginning, if there was
+ * an overflow.
+ */
+ if (etr_buf->full)
+ tmc_etr_buf_insert_barrier_packet(etr_buf,
+ etr_buf->offset);
}
}
@@ -1263,8 +1280,6 @@ retry:
if (IS_ERR(etr_buf))
return etr_buf;
- refcount_set(&etr_buf->refcount, 1);
-
/* Now that we have a buffer, add it to the IDR. */
mutex_lock(&drvdata->idr_mutex);
ret = idr_alloc(&drvdata->idr, etr_buf, pid, pid + 1, GFP_KERNEL);
@@ -1291,19 +1306,11 @@ get_perf_etr_buf_per_thread(struct tmc_drvdata *drvdata,
struct perf_event *event, int nr_pages,
void **pages, bool snapshot)
{
- struct etr_buf *etr_buf;
-
/*
* In per-thread mode the etr_buf isn't shared, so just go ahead
* with memory allocation.
*/
- etr_buf = alloc_etr_buf(drvdata, event, nr_pages, pages, snapshot);
- if (IS_ERR(etr_buf))
- goto out;
-
- refcount_set(&etr_buf->refcount, 1);
-out:
- return etr_buf;
+ return alloc_etr_buf(drvdata, event, nr_pages, pages, snapshot);
}
static struct etr_buf *
@@ -1410,10 +1417,12 @@ free_etr_perf_buffer:
* tmc_etr_sync_perf_buffer: Copy the actual trace data from the hardware
* buffer to the perf ring buffer.
*/
-static void tmc_etr_sync_perf_buffer(struct etr_perf_buffer *etr_perf)
+static void tmc_etr_sync_perf_buffer(struct etr_perf_buffer *etr_perf,
+ unsigned long src_offset,
+ unsigned long to_copy)
{
- long bytes, to_copy;
- long pg_idx, pg_offset, src_offset;
+ long bytes;
+ long pg_idx, pg_offset;
unsigned long head = etr_perf->head;
char **dst_pages, *src_buf;
struct etr_buf *etr_buf = etr_perf->etr_buf;
@@ -1422,8 +1431,6 @@ static void tmc_etr_sync_perf_buffer(struct etr_perf_buffer *etr_perf)
pg_idx = head >> PAGE_SHIFT;
pg_offset = head & (PAGE_SIZE - 1);
dst_pages = (char **)etr_perf->pages;
- src_offset = etr_buf->offset;
- to_copy = etr_buf->len;
while (to_copy > 0) {
/*
@@ -1434,6 +1441,8 @@ static void tmc_etr_sync_perf_buffer(struct etr_perf_buffer *etr_perf)
* 3) what is available in the destination page.
* in one iteration.
*/
+ if (src_offset >= etr_buf->size)
+ src_offset -= etr_buf->size;
bytes = tmc_etr_buf_get_data(etr_buf, src_offset, to_copy,
&src_buf);
if (WARN_ON_ONCE(bytes <= 0))
@@ -1454,8 +1463,6 @@ static void tmc_etr_sync_perf_buffer(struct etr_perf_buffer *etr_perf)
/* Move source pointers */
src_offset += bytes;
- if (src_offset >= etr_buf->size)
- src_offset -= etr_buf->size;
}
}
@@ -1471,7 +1478,7 @@ tmc_update_etr_buffer(struct coresight_device *csdev,
void *config)
{
bool lost = false;
- unsigned long flags, size = 0;
+ unsigned long flags, offset, size = 0;
struct tmc_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
struct etr_perf_buffer *etr_perf = config;
struct etr_buf *etr_buf = etr_perf->etr_buf;
@@ -1484,7 +1491,7 @@ tmc_update_etr_buffer(struct coresight_device *csdev,
goto out;
}
- if (WARN_ON(drvdata->perf_data != etr_perf)) {
+ if (WARN_ON(drvdata->perf_buf != etr_buf)) {
lost = true;
spin_unlock_irqrestore(&drvdata->spinlock, flags);
goto out;
@@ -1496,12 +1503,38 @@ tmc_update_etr_buffer(struct coresight_device *csdev,
tmc_sync_etr_buf(drvdata);
CS_LOCK(drvdata->base);
- /* Reset perf specific data */
- drvdata->perf_data = NULL;
spin_unlock_irqrestore(&drvdata->spinlock, flags);
+ lost = etr_buf->full;
+ offset = etr_buf->offset;
size = etr_buf->len;
- tmc_etr_sync_perf_buffer(etr_perf);
+
+ /*
+ * The ETR buffer may be bigger than the space available in the
+ * perf ring buffer (handle->size). If so advance the offset so that we
+ * get the latest trace data. In snapshot mode none of that matters
+ * since we are expected to clobber stale data in favour of the latest
+ * traces.
+ */
+ if (!etr_perf->snapshot && size > handle->size) {
+ u32 mask = tmc_get_memwidth_mask(drvdata);
+
+ /*
+ * Make sure the new size is aligned in accordance with the
+ * requirement explained in function tmc_get_memwidth_mask().
+ */
+ size = handle->size & mask;
+ offset = etr_buf->offset + etr_buf->len - size;
+
+ if (offset >= etr_buf->size)
+ offset -= etr_buf->size;
+ lost = true;
+ }
+
+ /* Insert barrier packets at the beginning, if there was an overflow */
+ if (lost)
+ tmc_etr_buf_insert_barrier_packet(etr_buf, etr_buf->offset);
+ tmc_etr_sync_perf_buffer(etr_perf, offset, size);
/*
* In snapshot mode we simply increment the head by the number of byte
@@ -1511,8 +1544,6 @@ tmc_update_etr_buffer(struct coresight_device *csdev,
*/
if (etr_perf->snapshot)
handle->head += size;
-
- lost |= etr_buf->full;
out:
/*
* Don't set the TRUNCATED flag in snapshot mode because 1) the
@@ -1556,7 +1587,6 @@ static int tmc_enable_etr_sink_perf(struct coresight_device *csdev, void *data)
}
etr_perf->head = PERF_IDX2OFF(handle->head, etr_perf);
- drvdata->perf_data = etr_perf;
/*
* No HW configuration is needed if the sink is already in
@@ -1572,6 +1602,7 @@ static int tmc_enable_etr_sink_perf(struct coresight_device *csdev, void *data)
/* Associate with monitored process. */
drvdata->pid = pid;
drvdata->mode = CS_MODE_PERF;
+ drvdata->perf_buf = etr_perf->etr_buf;
atomic_inc(csdev->refcnt);
}
@@ -1617,6 +1648,8 @@ static int tmc_disable_etr_sink(struct coresight_device *csdev)
/* Dissociate from monitored process. */
drvdata->pid = -1;
drvdata->mode = CS_MODE_DISABLED;
+ /* Reset perf specific data */
+ drvdata->perf_buf = NULL;
spin_unlock_irqrestore(&drvdata->spinlock, flags);
diff --git a/drivers/hwtracing/coresight/coresight-tmc.c b/drivers/hwtracing/coresight/coresight-tmc.c
index be37aff573b4..1cf82fa58289 100644
--- a/drivers/hwtracing/coresight/coresight-tmc.c
+++ b/drivers/hwtracing/coresight/coresight-tmc.c
@@ -70,6 +70,34 @@ void tmc_disable_hw(struct tmc_drvdata *drvdata)
writel_relaxed(0x0, drvdata->base + TMC_CTL);
}
+u32 tmc_get_memwidth_mask(struct tmc_drvdata *drvdata)
+{
+ u32 mask = 0;
+
+ /*
+ * When moving RRP or an offset address forward, the new values must
+ * be byte-address aligned to the width of the trace memory databus
+ * _and_ to a frame boundary (16 byte), whichever is the biggest. For
+ * example, for 32-bit, 64-bit and 128-bit wide trace memory, the four
+ * LSBs must be 0s. For 256-bit wide trace memory, the five LSBs must
+ * be 0s.
+ */
+ switch (drvdata->memwidth) {
+ case TMC_MEM_INTF_WIDTH_32BITS:
+ /* fallthrough */
+ case TMC_MEM_INTF_WIDTH_64BITS:
+ /* fallthrough */
+ case TMC_MEM_INTF_WIDTH_128BITS:
+ mask = GENMASK(31, 4);
+ break;
+ case TMC_MEM_INTF_WIDTH_256BITS:
+ mask = GENMASK(31, 5);
+ break;
+ }
+
+ return mask;
+}
+
static int tmc_read_prepare(struct tmc_drvdata *drvdata)
{
int ret = 0;
@@ -236,6 +264,7 @@ coresight_tmc_reg(ffcr, TMC_FFCR);
coresight_tmc_reg(mode, TMC_MODE);
coresight_tmc_reg(pscr, TMC_PSCR);
coresight_tmc_reg(axictl, TMC_AXICTL);
+coresight_tmc_reg(authstatus, TMC_AUTHSTATUS);
coresight_tmc_reg(devid, CORESIGHT_DEVID);
coresight_tmc_reg64(rrp, TMC_RRP, TMC_RRPHI);
coresight_tmc_reg64(rwp, TMC_RWP, TMC_RWPHI);
@@ -255,6 +284,7 @@ static struct attribute *coresight_tmc_mgmt_attrs[] = {
&dev_attr_devid.attr,
&dev_attr_dba.attr,
&dev_attr_axictl.attr,
+ &dev_attr_authstatus.attr,
NULL,
};
@@ -342,6 +372,13 @@ static inline bool tmc_etr_can_use_sg(struct device *dev)
return fwnode_property_present(dev->fwnode, "arm,scatter-gather");
}
+static inline bool tmc_etr_has_non_secure_access(struct tmc_drvdata *drvdata)
+{
+ u32 auth = readl_relaxed(drvdata->base + TMC_AUTHSTATUS);
+
+ return (auth & TMC_AUTH_NSID_MASK) == 0x3;
+}
+
/* Detect and initialise the capabilities of a TMC ETR */
static int tmc_etr_setup_caps(struct device *parent, u32 devid, void *dev_caps)
{
@@ -349,6 +386,9 @@ static int tmc_etr_setup_caps(struct device *parent, u32 devid, void *dev_caps)
u32 dma_mask = 0;
struct tmc_drvdata *drvdata = dev_get_drvdata(parent);
+ if (!tmc_etr_has_non_secure_access(drvdata))
+ return -EACCES;
+
/* Set the unadvertised capabilities */
tmc_etr_init_caps(drvdata, (u32)(unsigned long)dev_caps);
diff --git a/drivers/hwtracing/coresight/coresight-tmc.h b/drivers/hwtracing/coresight/coresight-tmc.h
index 1ed50411cc3c..71de978575f3 100644
--- a/drivers/hwtracing/coresight/coresight-tmc.h
+++ b/drivers/hwtracing/coresight/coresight-tmc.h
@@ -39,6 +39,7 @@
#define TMC_ITATBCTR2 0xef0
#define TMC_ITATBCTR1 0xef4
#define TMC_ITATBCTR0 0xef8
+#define TMC_AUTHSTATUS 0xfb8
/* register description */
/* TMC_CTL - 0x020 */
@@ -47,6 +48,7 @@
#define TMC_STS_TMCREADY_BIT 2
#define TMC_STS_FULL BIT(0)
#define TMC_STS_TRIGGERED BIT(1)
+#define TMC_STS_MEMERR BIT(5)
/*
* TMC_AXICTL - 0x110
*
@@ -89,6 +91,8 @@
#define TMC_DEVID_AXIAW_SHIFT 17
#define TMC_DEVID_AXIAW_MASK 0x7f
+#define TMC_AUTH_NSID_MASK GENMASK(1, 0)
+
enum tmc_config_type {
TMC_CONFIG_TYPE_ETB,
TMC_CONFIG_TYPE_ETR,
@@ -178,8 +182,8 @@ struct etr_buf {
* device configuration register (DEVID)
* @idr: Holds etr_bufs allocated for this ETR.
* @idr_mutex: Access serialisation for idr.
- * @perf_data: PERF buffer for ETR.
- * @sysfs_data: SYSFS buffer for ETR.
+ * @sysfs_buf: SYSFS buffer for ETR.
+ * @perf_buf: PERF buffer for ETR.
*/
struct tmc_drvdata {
void __iomem *base;
@@ -202,7 +206,7 @@ struct tmc_drvdata {
struct idr idr;
struct mutex idr_mutex;
struct etr_buf *sysfs_buf;
- void *perf_data;
+ struct etr_buf *perf_buf;
};
struct etr_buf_operations {
@@ -251,6 +255,7 @@ void tmc_wait_for_tmcready(struct tmc_drvdata *drvdata);
void tmc_flush_and_stop(struct tmc_drvdata *drvdata);
void tmc_enable_hw(struct tmc_drvdata *drvdata);
void tmc_disable_hw(struct tmc_drvdata *drvdata);
+u32 tmc_get_memwidth_mask(struct tmc_drvdata *drvdata);
/* ETB/ETF functions */
int tmc_read_prepare_etb(struct tmc_drvdata *drvdata);
diff --git a/drivers/hwtracing/intel_th/Makefile b/drivers/hwtracing/intel_th/Makefile
index d9252fa8d9ca..b63eb8f309ad 100644
--- a/drivers/hwtracing/intel_th/Makefile
+++ b/drivers/hwtracing/intel_th/Makefile
@@ -20,3 +20,6 @@ intel_th_msu-y := msu.o
obj-$(CONFIG_INTEL_TH_PTI) += intel_th_pti.o
intel_th_pti-y := pti.o
+
+obj-$(CONFIG_INTEL_TH_MSU) += intel_th_msu_sink.o
+intel_th_msu_sink-y := msu-sink.o
diff --git a/drivers/hwtracing/intel_th/msu-sink.c b/drivers/hwtracing/intel_th/msu-sink.c
new file mode 100644
index 000000000000..2c7f5116be12
--- /dev/null
+++ b/drivers/hwtracing/intel_th/msu-sink.c
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * An example software sink buffer for Intel TH MSU.
+ *
+ * Copyright (C) 2019 Intel Corporation.
+ */
+
+#include <linux/intel_th.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+
+#define MAX_SGTS 16
+
+struct msu_sink_private {
+ struct device *dev;
+ struct sg_table **sgts;
+ unsigned int nr_sgts;
+};
+
+static void *msu_sink_assign(struct device *dev, int *mode)
+{
+ struct msu_sink_private *priv;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return NULL;
+
+ priv->sgts = kcalloc(MAX_SGTS, sizeof(void *), GFP_KERNEL);
+ if (!priv->sgts) {
+ kfree(priv);
+ return NULL;
+ }
+
+ priv->dev = dev;
+ *mode = MSC_MODE_MULTI;
+
+ return priv;
+}
+
+static void msu_sink_unassign(void *data)
+{
+ struct msu_sink_private *priv = data;
+
+ kfree(priv->sgts);
+ kfree(priv);
+}
+
+/* See also: msc.c: __msc_buffer_win_alloc() */
+static int msu_sink_alloc_window(void *data, struct sg_table **sgt, size_t size)
+{
+ struct msu_sink_private *priv = data;
+ unsigned int nents;
+ struct scatterlist *sg_ptr;
+ void *block;
+ int ret, i;
+
+ if (priv->nr_sgts == MAX_SGTS)
+ return -ENOMEM;
+
+ nents = DIV_ROUND_UP(size, PAGE_SIZE);
+
+ ret = sg_alloc_table(*sgt, nents, GFP_KERNEL);
+ if (ret)
+ return -ENOMEM;
+
+ priv->sgts[priv->nr_sgts++] = *sgt;
+
+ for_each_sg((*sgt)->sgl, sg_ptr, nents, i) {
+ block = dma_alloc_coherent(priv->dev->parent->parent,
+ PAGE_SIZE, &sg_dma_address(sg_ptr),
+ GFP_KERNEL);
+ sg_set_buf(sg_ptr, block, PAGE_SIZE);
+ }
+
+ return nents;
+}
+
+/* See also: msc.c: __msc_buffer_win_free() */
+static void msu_sink_free_window(void *data, struct sg_table *sgt)
+{
+ struct msu_sink_private *priv = data;
+ struct scatterlist *sg_ptr;
+ int i;
+
+ for_each_sg(sgt->sgl, sg_ptr, sgt->nents, i) {
+ dma_free_coherent(priv->dev->parent->parent, PAGE_SIZE,
+ sg_virt(sg_ptr), sg_dma_address(sg_ptr));
+ }
+
+ sg_free_table(sgt);
+ priv->nr_sgts--;
+}
+
+static int msu_sink_ready(void *data, struct sg_table *sgt, size_t bytes)
+{
+ struct msu_sink_private *priv = data;
+
+ intel_th_msc_window_unlock(priv->dev, sgt);
+
+ return 0;
+}
+
+static const struct msu_buffer sink_mbuf = {
+ .name = "sink",
+ .assign = msu_sink_assign,
+ .unassign = msu_sink_unassign,
+ .alloc_window = msu_sink_alloc_window,
+ .free_window = msu_sink_free_window,
+ .ready = msu_sink_ready,
+};
+
+module_intel_th_msu_buffer(sink_mbuf);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/hwtracing/intel_th/msu.c b/drivers/hwtracing/intel_th/msu.c
index 8ab28e5fb366..fc9f15f36ad4 100644
--- a/drivers/hwtracing/intel_th/msu.c
+++ b/drivers/hwtracing/intel_th/msu.c
@@ -17,21 +17,48 @@
#include <linux/mm.h>
#include <linux/fs.h>
#include <linux/io.h>
+#include <linux/workqueue.h>
#include <linux/dma-mapping.h>
#ifdef CONFIG_X86
#include <asm/set_memory.h>
#endif
+#include <linux/intel_th.h>
#include "intel_th.h"
#include "msu.h"
#define msc_dev(x) (&(x)->thdev->dev)
+/*
+ * Lockout state transitions:
+ * READY -> INUSE -+-> LOCKED -+-> READY -> etc.
+ * \-----------/
+ * WIN_READY: window can be used by HW
+ * WIN_INUSE: window is in use
+ * WIN_LOCKED: window is filled up and is being processed by the buffer
+ * handling code
+ *
+ * All state transitions happen automatically, except for the LOCKED->READY,
+ * which needs to be signalled by the buffer code by calling
+ * intel_th_msc_window_unlock().
+ *
+ * When the interrupt handler has to switch to the next window, it checks
+ * whether it's READY, and if it is, it performs the switch and tracing
+ * continues. If it's LOCKED, it stops the trace.
+ */
+enum lockout_state {
+ WIN_READY = 0,
+ WIN_INUSE,
+ WIN_LOCKED
+};
+
/**
* struct msc_window - multiblock mode window descriptor
* @entry: window list linkage (msc::win_list)
* @pgoff: page offset into the buffer that this window starts at
+ * @lockout: lockout state, see comment below
+ * @lo_lock: lockout state serialization
* @nr_blocks: number of blocks (pages) in this window
* @nr_segs: number of segments in this window (<= @nr_blocks)
* @_sgt: array of block descriptors
@@ -40,6 +67,8 @@
struct msc_window {
struct list_head entry;
unsigned long pgoff;
+ enum lockout_state lockout;
+ spinlock_t lo_lock;
unsigned int nr_blocks;
unsigned int nr_segs;
struct msc *msc;
@@ -66,8 +95,8 @@ struct msc_iter {
struct msc_window *start_win;
struct msc_window *win;
unsigned long offset;
- int start_block;
- int block;
+ struct scatterlist *start_block;
+ struct scatterlist *block;
unsigned int block_off;
unsigned int wrap_count;
unsigned int eof;
@@ -77,6 +106,8 @@ struct msc_iter {
* struct msc - MSC device representation
* @reg_base: register window base address
* @thdev: intel_th_device pointer
+ * @mbuf: MSU buffer, if assigned
+ * @mbuf_priv MSU buffer's private data, if @mbuf
* @win_list: list of windows in multiblock mode
* @single_sgt: single mode buffer
* @cur_win: current window
@@ -100,6 +131,10 @@ struct msc {
void __iomem *msu_base;
struct intel_th_device *thdev;
+ const struct msu_buffer *mbuf;
+ void *mbuf_priv;
+
+ struct work_struct work;
struct list_head win_list;
struct sg_table single_sgt;
struct msc_window *cur_win;
@@ -108,6 +143,8 @@ struct msc {
unsigned int single_wrap : 1;
void *base;
dma_addr_t base_addr;
+ u32 orig_addr;
+ u32 orig_sz;
/* <0: no buffer, 0: no users, >0: active users */
atomic_t user_count;
@@ -126,6 +163,101 @@ struct msc {
unsigned int index;
};
+static LIST_HEAD(msu_buffer_list);
+static struct mutex msu_buffer_mutex;
+
+/**
+ * struct msu_buffer_entry - internal MSU buffer bookkeeping
+ * @entry: link to msu_buffer_list
+ * @mbuf: MSU buffer object
+ * @owner: module that provides this MSU buffer
+ */
+struct msu_buffer_entry {
+ struct list_head entry;
+ const struct msu_buffer *mbuf;
+ struct module *owner;
+};
+
+static struct msu_buffer_entry *__msu_buffer_entry_find(const char *name)
+{
+ struct msu_buffer_entry *mbe;
+
+ lockdep_assert_held(&msu_buffer_mutex);
+
+ list_for_each_entry(mbe, &msu_buffer_list, entry) {
+ if (!strcmp(mbe->mbuf->name, name))
+ return mbe;
+ }
+
+ return NULL;
+}
+
+static const struct msu_buffer *
+msu_buffer_get(const char *name)
+{
+ struct msu_buffer_entry *mbe;
+
+ mutex_lock(&msu_buffer_mutex);
+ mbe = __msu_buffer_entry_find(name);
+ if (mbe && !try_module_get(mbe->owner))
+ mbe = NULL;
+ mutex_unlock(&msu_buffer_mutex);
+
+ return mbe ? mbe->mbuf : NULL;
+}
+
+static void msu_buffer_put(const struct msu_buffer *mbuf)
+{
+ struct msu_buffer_entry *mbe;
+
+ mutex_lock(&msu_buffer_mutex);
+ mbe = __msu_buffer_entry_find(mbuf->name);
+ if (mbe)
+ module_put(mbe->owner);
+ mutex_unlock(&msu_buffer_mutex);
+}
+
+int intel_th_msu_buffer_register(const struct msu_buffer *mbuf,
+ struct module *owner)
+{
+ struct msu_buffer_entry *mbe;
+ int ret = 0;
+
+ mbe = kzalloc(sizeof(*mbe), GFP_KERNEL);
+ if (!mbe)
+ return -ENOMEM;
+
+ mutex_lock(&msu_buffer_mutex);
+ if (__msu_buffer_entry_find(mbuf->name)) {
+ ret = -EEXIST;
+ kfree(mbe);
+ goto unlock;
+ }
+
+ mbe->mbuf = mbuf;
+ mbe->owner = owner;
+ list_add_tail(&mbe->entry, &msu_buffer_list);
+unlock:
+ mutex_unlock(&msu_buffer_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(intel_th_msu_buffer_register);
+
+void intel_th_msu_buffer_unregister(const struct msu_buffer *mbuf)
+{
+ struct msu_buffer_entry *mbe;
+
+ mutex_lock(&msu_buffer_mutex);
+ mbe = __msu_buffer_entry_find(mbuf->name);
+ if (mbe) {
+ list_del(&mbe->entry);
+ kfree(mbe);
+ }
+ mutex_unlock(&msu_buffer_mutex);
+}
+EXPORT_SYMBOL_GPL(intel_th_msu_buffer_unregister);
+
static inline bool msc_block_is_empty(struct msc_block_desc *bdesc)
{
/* header hasn't been written */
@@ -139,28 +271,25 @@ static inline bool msc_block_is_empty(struct msc_block_desc *bdesc)
return false;
}
-static inline struct msc_block_desc *
-msc_win_block(struct msc_window *win, unsigned int block)
+static inline struct scatterlist *msc_win_base_sg(struct msc_window *win)
{
- return sg_virt(&win->sgt->sgl[block]);
+ return win->sgt->sgl;
}
-static inline size_t
-msc_win_actual_bsz(struct msc_window *win, unsigned int block)
+static inline struct msc_block_desc *msc_win_base(struct msc_window *win)
{
- return win->sgt->sgl[block].length;
+ return sg_virt(msc_win_base_sg(win));
}
-static inline dma_addr_t
-msc_win_baddr(struct msc_window *win, unsigned int block)
+static inline dma_addr_t msc_win_base_dma(struct msc_window *win)
{
- return sg_dma_address(&win->sgt->sgl[block]);
+ return sg_dma_address(msc_win_base_sg(win));
}
static inline unsigned long
-msc_win_bpfn(struct msc_window *win, unsigned int block)
+msc_win_base_pfn(struct msc_window *win)
{
- return msc_win_baddr(win, block) >> PAGE_SHIFT;
+ return PFN_DOWN(msc_win_base_dma(win));
}
/**
@@ -188,6 +317,26 @@ static struct msc_window *msc_next_window(struct msc_window *win)
return list_next_entry(win, entry);
}
+static size_t msc_win_total_sz(struct msc_window *win)
+{
+ struct scatterlist *sg;
+ unsigned int blk;
+ size_t size = 0;
+
+ for_each_sg(win->sgt->sgl, sg, win->nr_segs, blk) {
+ struct msc_block_desc *bdesc = sg_virt(sg);
+
+ if (msc_block_wrapped(bdesc))
+ return win->nr_blocks << PAGE_SHIFT;
+
+ size += msc_total_sz(bdesc);
+ if (msc_block_last_written(bdesc))
+ break;
+ }
+
+ return size;
+}
+
/**
* msc_find_window() - find a window matching a given sg_table
* @msc: MSC device
@@ -216,7 +365,7 @@ msc_find_window(struct msc *msc, struct sg_table *sgt, bool nonempty)
found++;
/* skip the empty ones */
- if (nonempty && msc_block_is_empty(msc_win_block(win, 0)))
+ if (nonempty && msc_block_is_empty(msc_win_base(win)))
continue;
if (found)
@@ -250,44 +399,38 @@ static struct msc_window *msc_oldest_window(struct msc *msc)
}
/**
- * msc_win_oldest_block() - locate the oldest block in a given window
+ * msc_win_oldest_sg() - locate the oldest block in a given window
* @win: window to look at
*
* Return: index of the block with the oldest data
*/
-static unsigned int msc_win_oldest_block(struct msc_window *win)
+static struct scatterlist *msc_win_oldest_sg(struct msc_window *win)
{
unsigned int blk;
- struct msc_block_desc *bdesc = msc_win_block(win, 0);
+ struct scatterlist *sg;
+ struct msc_block_desc *bdesc = msc_win_base(win);
/* without wrapping, first block is the oldest */
if (!msc_block_wrapped(bdesc))
- return 0;
+ return msc_win_base_sg(win);
/*
* with wrapping, last written block contains both the newest and the
* oldest data for this window.
*/
- for (blk = 0; blk < win->nr_segs; blk++) {
- bdesc = msc_win_block(win, blk);
+ for_each_sg(win->sgt->sgl, sg, win->nr_segs, blk) {
+ struct msc_block_desc *bdesc = sg_virt(sg);
if (msc_block_last_written(bdesc))
- return blk;
+ return sg;
}
- return 0;
+ return msc_win_base_sg(win);
}
static struct msc_block_desc *msc_iter_bdesc(struct msc_iter *iter)
{
- return msc_win_block(iter->win, iter->block);
-}
-
-static void msc_iter_init(struct msc_iter *iter)
-{
- memset(iter, 0, sizeof(*iter));
- iter->start_block = -1;
- iter->block = -1;
+ return sg_virt(iter->block);
}
static struct msc_iter *msc_iter_install(struct msc *msc)
@@ -312,7 +455,6 @@ static struct msc_iter *msc_iter_install(struct msc *msc)
goto unlock;
}
- msc_iter_init(iter);
iter->msc = msc;
list_add_tail(&iter->entry, &msc->iter_list);
@@ -333,10 +475,10 @@ static void msc_iter_remove(struct msc_iter *iter, struct msc *msc)
static void msc_iter_block_start(struct msc_iter *iter)
{
- if (iter->start_block != -1)
+ if (iter->start_block)
return;
- iter->start_block = msc_win_oldest_block(iter->win);
+ iter->start_block = msc_win_oldest_sg(iter->win);
iter->block = iter->start_block;
iter->wrap_count = 0;
@@ -360,7 +502,7 @@ static int msc_iter_win_start(struct msc_iter *iter, struct msc *msc)
return -EINVAL;
iter->win = iter->start_win;
- iter->start_block = -1;
+ iter->start_block = NULL;
msc_iter_block_start(iter);
@@ -370,7 +512,7 @@ static int msc_iter_win_start(struct msc_iter *iter, struct msc *msc)
static int msc_iter_win_advance(struct msc_iter *iter)
{
iter->win = msc_next_window(iter->win);
- iter->start_block = -1;
+ iter->start_block = NULL;
if (iter->win == iter->start_win) {
iter->eof++;
@@ -400,8 +542,10 @@ static int msc_iter_block_advance(struct msc_iter *iter)
return msc_iter_win_advance(iter);
/* block advance */
- if (++iter->block == iter->win->nr_segs)
- iter->block = 0;
+ if (sg_is_last(iter->block))
+ iter->block = msc_win_base_sg(iter->win);
+ else
+ iter->block = sg_next(iter->block);
/* no wrapping, sanity check in case there is no last written block */
if (!iter->wrap_count && iter->block == iter->start_block)
@@ -506,14 +650,15 @@ next_block:
static void msc_buffer_clear_hw_header(struct msc *msc)
{
struct msc_window *win;
+ struct scatterlist *sg;
list_for_each_entry(win, &msc->win_list, entry) {
unsigned int blk;
size_t hw_sz = sizeof(struct msc_block_desc) -
offsetof(struct msc_block_desc, hw_tag);
- for (blk = 0; blk < win->nr_segs; blk++) {
- struct msc_block_desc *bdesc = msc_win_block(win, blk);
+ for_each_sg(win->sgt->sgl, sg, win->nr_segs, blk) {
+ struct msc_block_desc *bdesc = sg_virt(sg);
memset(&bdesc->hw_tag, 0, hw_sz);
}
@@ -527,6 +672,9 @@ static int intel_th_msu_init(struct msc *msc)
if (!msc->do_irq)
return 0;
+ if (!msc->mbuf)
+ return 0;
+
mintctl = ioread32(msc->msu_base + REG_MSU_MINTCTL);
mintctl |= msc->index ? M1BLIE : M0BLIE;
iowrite32(mintctl, msc->msu_base + REG_MSU_MINTCTL);
@@ -554,6 +702,49 @@ static void intel_th_msu_deinit(struct msc *msc)
iowrite32(mintctl, msc->msu_base + REG_MSU_MINTCTL);
}
+static int msc_win_set_lockout(struct msc_window *win,
+ enum lockout_state expect,
+ enum lockout_state new)
+{
+ enum lockout_state old;
+ unsigned long flags;
+ int ret = 0;
+
+ if (!win->msc->mbuf)
+ return 0;
+
+ spin_lock_irqsave(&win->lo_lock, flags);
+ old = win->lockout;
+
+ if (old != expect) {
+ ret = -EINVAL;
+ dev_warn_ratelimited(msc_dev(win->msc),
+ "expected lockout state %d, got %d\n",
+ expect, old);
+ goto unlock;
+ }
+
+ win->lockout = new;
+
+ if (old == expect && new == WIN_LOCKED)
+ atomic_inc(&win->msc->user_count);
+ else if (old == expect && old == WIN_LOCKED)
+ atomic_dec(&win->msc->user_count);
+
+unlock:
+ spin_unlock_irqrestore(&win->lo_lock, flags);
+
+ if (ret) {
+ if (expect == WIN_READY && old == WIN_LOCKED)
+ return -EBUSY;
+
+ /* from intel_th_msc_window_unlock(), don't warn if not locked */
+ if (expect == WIN_LOCKED && old == new)
+ return 0;
+ }
+
+ return ret;
+}
/**
* msc_configure() - set up MSC hardware
* @msc: the MSC device to configure
@@ -571,8 +762,15 @@ static int msc_configure(struct msc *msc)
if (msc->mode > MSC_MODE_MULTI)
return -ENOTSUPP;
- if (msc->mode == MSC_MODE_MULTI)
+ if (msc->mode == MSC_MODE_MULTI) {
+ if (msc_win_set_lockout(msc->cur_win, WIN_READY, WIN_INUSE))
+ return -EBUSY;
+
msc_buffer_clear_hw_header(msc);
+ }
+
+ msc->orig_addr = ioread32(msc->reg_base + REG_MSU_MSC0BAR);
+ msc->orig_sz = ioread32(msc->reg_base + REG_MSU_MSC0SIZE);
reg = msc->base_addr >> PAGE_SHIFT;
iowrite32(reg, msc->reg_base + REG_MSU_MSC0BAR);
@@ -594,10 +792,14 @@ static int msc_configure(struct msc *msc)
iowrite32(reg, msc->reg_base + REG_MSU_MSC0CTL);
+ intel_th_msu_init(msc);
+
msc->thdev->output.multiblock = msc->mode == MSC_MODE_MULTI;
intel_th_trace_enable(msc->thdev);
msc->enabled = 1;
+ if (msc->mbuf && msc->mbuf->activate)
+ msc->mbuf->activate(msc->mbuf_priv);
return 0;
}
@@ -611,10 +813,17 @@ static int msc_configure(struct msc *msc)
*/
static void msc_disable(struct msc *msc)
{
+ struct msc_window *win = msc->cur_win;
u32 reg;
lockdep_assert_held(&msc->buf_mutex);
+ if (msc->mode == MSC_MODE_MULTI)
+ msc_win_set_lockout(win, WIN_INUSE, WIN_LOCKED);
+
+ if (msc->mbuf && msc->mbuf->deactivate)
+ msc->mbuf->deactivate(msc->mbuf_priv);
+ intel_th_msu_deinit(msc);
intel_th_trace_disable(msc->thdev);
if (msc->mode == MSC_MODE_SINGLE) {
@@ -630,16 +839,25 @@ static void msc_disable(struct msc *msc)
reg = ioread32(msc->reg_base + REG_MSU_MSC0CTL);
reg &= ~MSC_EN;
iowrite32(reg, msc->reg_base + REG_MSU_MSC0CTL);
+
+ if (msc->mbuf && msc->mbuf->ready)
+ msc->mbuf->ready(msc->mbuf_priv, win->sgt,
+ msc_win_total_sz(win));
+
msc->enabled = 0;
- iowrite32(0, msc->reg_base + REG_MSU_MSC0BAR);
- iowrite32(0, msc->reg_base + REG_MSU_MSC0SIZE);
+ iowrite32(msc->orig_addr, msc->reg_base + REG_MSU_MSC0BAR);
+ iowrite32(msc->orig_sz, msc->reg_base + REG_MSU_MSC0SIZE);
dev_dbg(msc_dev(msc), "MSCnNWSA: %08x\n",
ioread32(msc->reg_base + REG_MSU_MSC0NWSA));
reg = ioread32(msc->reg_base + REG_MSU_MSC0STS);
dev_dbg(msc_dev(msc), "MSCnSTS: %08x\n", reg);
+
+ reg = ioread32(msc->reg_base + REG_MSU_MSUSTS);
+ reg &= msc->index ? MSUSTS_MSC1BLAST : MSUSTS_MSC0BLAST;
+ iowrite32(reg, msc->reg_base + REG_MSU_MSUSTS);
}
static int intel_th_msc_activate(struct intel_th_device *thdev)
@@ -791,10 +1009,9 @@ static int __msc_buffer_win_alloc(struct msc_window *win,
return nr_segs;
err_nomem:
- for (i--; i >= 0; i--)
+ for_each_sg(win->sgt->sgl, sg_ptr, i, ret)
dma_free_coherent(msc_dev(win->msc)->parent->parent, PAGE_SIZE,
- msc_win_block(win, i),
- msc_win_baddr(win, i));
+ sg_virt(sg_ptr), sg_dma_address(sg_ptr));
sg_free_table(win->sgt);
@@ -804,20 +1021,26 @@ err_nomem:
#ifdef CONFIG_X86
static void msc_buffer_set_uc(struct msc_window *win, unsigned int nr_segs)
{
+ struct scatterlist *sg_ptr;
int i;
- for (i = 0; i < nr_segs; i++)
+ for_each_sg(win->sgt->sgl, sg_ptr, nr_segs, i) {
/* Set the page as uncached */
- set_memory_uc((unsigned long)msc_win_block(win, i), 1);
+ set_memory_uc((unsigned long)sg_virt(sg_ptr),
+ PFN_DOWN(sg_ptr->length));
+ }
}
static void msc_buffer_set_wb(struct msc_window *win)
{
+ struct scatterlist *sg_ptr;
int i;
- for (i = 0; i < win->nr_segs; i++)
+ for_each_sg(win->sgt->sgl, sg_ptr, win->nr_segs, i) {
/* Reset the page to write-back */
- set_memory_wb((unsigned long)msc_win_block(win, i), 1);
+ set_memory_wb((unsigned long)sg_virt(sg_ptr),
+ PFN_DOWN(sg_ptr->length));
+ }
}
#else /* !X86 */
static inline void
@@ -843,19 +1066,14 @@ static int msc_buffer_win_alloc(struct msc *msc, unsigned int nr_blocks)
if (!nr_blocks)
return 0;
- /*
- * This limitation hold as long as we need random access to the
- * block. When that changes, this can go away.
- */
- if (nr_blocks > SG_MAX_SINGLE_ALLOC)
- return -EINVAL;
-
win = kzalloc(sizeof(*win), GFP_KERNEL);
if (!win)
return -ENOMEM;
win->msc = msc;
win->sgt = &win->_sgt;
+ win->lockout = WIN_READY;
+ spin_lock_init(&win->lo_lock);
if (!list_empty(&msc->win_list)) {
struct msc_window *prev = list_last_entry(&msc->win_list,
@@ -865,8 +1083,13 @@ static int msc_buffer_win_alloc(struct msc *msc, unsigned int nr_blocks)
win->pgoff = prev->pgoff + prev->nr_blocks;
}
- ret = __msc_buffer_win_alloc(win, nr_blocks);
- if (ret < 0)
+ if (msc->mbuf && msc->mbuf->alloc_window)
+ ret = msc->mbuf->alloc_window(msc->mbuf_priv, &win->sgt,
+ nr_blocks << PAGE_SHIFT);
+ else
+ ret = __msc_buffer_win_alloc(win, nr_blocks);
+
+ if (ret <= 0)
goto err_nomem;
msc_buffer_set_uc(win, ret);
@@ -875,8 +1098,8 @@ static int msc_buffer_win_alloc(struct msc *msc, unsigned int nr_blocks)
win->nr_blocks = nr_blocks;
if (list_empty(&msc->win_list)) {
- msc->base = msc_win_block(win, 0);
- msc->base_addr = msc_win_baddr(win, 0);
+ msc->base = msc_win_base(win);
+ msc->base_addr = msc_win_base_dma(win);
msc->cur_win = win;
}
@@ -893,14 +1116,15 @@ err_nomem:
static void __msc_buffer_win_free(struct msc *msc, struct msc_window *win)
{
+ struct scatterlist *sg;
int i;
- for (i = 0; i < win->nr_segs; i++) {
- struct page *page = sg_page(&win->sgt->sgl[i]);
+ for_each_sg(win->sgt->sgl, sg, win->nr_segs, i) {
+ struct page *page = sg_page(sg);
page->mapping = NULL;
dma_free_coherent(msc_dev(win->msc)->parent->parent, PAGE_SIZE,
- msc_win_block(win, i), msc_win_baddr(win, i));
+ sg_virt(sg), sg_dma_address(sg));
}
sg_free_table(win->sgt);
}
@@ -925,7 +1149,10 @@ static void msc_buffer_win_free(struct msc *msc, struct msc_window *win)
msc_buffer_set_wb(win);
- __msc_buffer_win_free(msc, win);
+ if (msc->mbuf && msc->mbuf->free_window)
+ msc->mbuf->free_window(msc->mbuf_priv, win->sgt);
+ else
+ __msc_buffer_win_free(msc, win);
kfree(win);
}
@@ -943,6 +1170,7 @@ static void msc_buffer_relink(struct msc *msc)
/* call with msc::mutex locked */
list_for_each_entry(win, &msc->win_list, entry) {
+ struct scatterlist *sg;
unsigned int blk;
u32 sw_tag = 0;
@@ -958,12 +1186,12 @@ static void msc_buffer_relink(struct msc *msc)
next_win = list_next_entry(win, entry);
}
- for (blk = 0; blk < win->nr_segs; blk++) {
- struct msc_block_desc *bdesc = msc_win_block(win, blk);
+ for_each_sg(win->sgt->sgl, sg, win->nr_segs, blk) {
+ struct msc_block_desc *bdesc = sg_virt(sg);
memset(bdesc, 0, sizeof(*bdesc));
- bdesc->next_win = msc_win_bpfn(next_win, 0);
+ bdesc->next_win = msc_win_base_pfn(next_win);
/*
* Similarly to last window, last block should point
@@ -971,13 +1199,15 @@ static void msc_buffer_relink(struct msc *msc)
*/
if (blk == win->nr_segs - 1) {
sw_tag |= MSC_SW_TAG_LASTBLK;
- bdesc->next_blk = msc_win_bpfn(win, 0);
+ bdesc->next_blk = msc_win_base_pfn(win);
} else {
- bdesc->next_blk = msc_win_bpfn(win, blk + 1);
+ dma_addr_t addr = sg_dma_address(sg_next(sg));
+
+ bdesc->next_blk = PFN_DOWN(addr);
}
bdesc->sw_tag = sw_tag;
- bdesc->block_sz = msc_win_actual_bsz(win, blk) / 64;
+ bdesc->block_sz = sg->length / 64;
}
}
@@ -1136,6 +1366,7 @@ static int msc_buffer_free_unless_used(struct msc *msc)
static struct page *msc_buffer_get_page(struct msc *msc, unsigned long pgoff)
{
struct msc_window *win;
+ struct scatterlist *sg;
unsigned int blk;
if (msc->mode == MSC_MODE_SINGLE)
@@ -1150,9 +1381,9 @@ static struct page *msc_buffer_get_page(struct msc *msc, unsigned long pgoff)
found:
pgoff -= win->pgoff;
- for (blk = 0; blk < win->nr_segs; blk++) {
- struct page *page = sg_page(&win->sgt->sgl[blk]);
- size_t pgsz = PFN_DOWN(msc_win_actual_bsz(win, blk));
+ for_each_sg(win->sgt->sgl, sg, win->nr_segs, blk) {
+ struct page *page = sg_page(sg);
+ size_t pgsz = PFN_DOWN(sg->length);
if (pgoff < pgsz)
return page + pgoff;
@@ -1456,24 +1687,83 @@ static void msc_win_switch(struct msc *msc)
else
msc->cur_win = list_next_entry(msc->cur_win, entry);
- msc->base = msc_win_block(msc->cur_win, 0);
- msc->base_addr = msc_win_baddr(msc->cur_win, 0);
+ msc->base = msc_win_base(msc->cur_win);
+ msc->base_addr = msc_win_base_dma(msc->cur_win);
intel_th_trace_switch(msc->thdev);
}
+/**
+ * intel_th_msc_window_unlock - put the window back in rotation
+ * @dev: MSC device to which this relates
+ * @sgt: buffer's sg_table for the window, does nothing if NULL
+ */
+void intel_th_msc_window_unlock(struct device *dev, struct sg_table *sgt)
+{
+ struct msc *msc = dev_get_drvdata(dev);
+ struct msc_window *win;
+
+ if (!sgt)
+ return;
+
+ win = msc_find_window(msc, sgt, false);
+ if (!win)
+ return;
+
+ msc_win_set_lockout(win, WIN_LOCKED, WIN_READY);
+}
+EXPORT_SYMBOL_GPL(intel_th_msc_window_unlock);
+
+static void msc_work(struct work_struct *work)
+{
+ struct msc *msc = container_of(work, struct msc, work);
+
+ intel_th_msc_deactivate(msc->thdev);
+}
+
static irqreturn_t intel_th_msc_interrupt(struct intel_th_device *thdev)
{
struct msc *msc = dev_get_drvdata(&thdev->dev);
u32 msusts = ioread32(msc->msu_base + REG_MSU_MSUSTS);
u32 mask = msc->index ? MSUSTS_MSC1BLAST : MSUSTS_MSC0BLAST;
+ struct msc_window *win, *next_win;
+
+ if (!msc->do_irq || !msc->mbuf)
+ return IRQ_NONE;
+
+ msusts &= mask;
+
+ if (!msusts)
+ return msc->enabled ? IRQ_HANDLED : IRQ_NONE;
+
+ iowrite32(msusts, msc->msu_base + REG_MSU_MSUSTS);
- if (!(msusts & mask)) {
- if (msc->enabled)
- return IRQ_HANDLED;
+ if (!msc->enabled)
return IRQ_NONE;
+
+ /* grab the window before we do the switch */
+ win = msc->cur_win;
+ if (!win)
+ return IRQ_HANDLED;
+ next_win = msc_next_window(win);
+ if (!next_win)
+ return IRQ_HANDLED;
+
+ /* next window: if READY, proceed, if LOCKED, stop the trace */
+ if (msc_win_set_lockout(next_win, WIN_READY, WIN_INUSE)) {
+ schedule_work(&msc->work);
+ return IRQ_HANDLED;
}
+ /* current window: INUSE -> LOCKED */
+ msc_win_set_lockout(win, WIN_INUSE, WIN_LOCKED);
+
+ msc_win_switch(msc);
+
+ if (msc->mbuf && msc->mbuf->ready)
+ msc->mbuf->ready(msc->mbuf_priv, win->sgt,
+ msc_win_total_sz(win));
+
return IRQ_HANDLED;
}
@@ -1511,21 +1801,43 @@ wrap_store(struct device *dev, struct device_attribute *attr, const char *buf,
static DEVICE_ATTR_RW(wrap);
+static void msc_buffer_unassign(struct msc *msc)
+{
+ lockdep_assert_held(&msc->buf_mutex);
+
+ if (!msc->mbuf)
+ return;
+
+ msc->mbuf->unassign(msc->mbuf_priv);
+ msu_buffer_put(msc->mbuf);
+ msc->mbuf_priv = NULL;
+ msc->mbuf = NULL;
+}
+
static ssize_t
mode_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct msc *msc = dev_get_drvdata(dev);
+ const char *mode = msc_mode[msc->mode];
+ ssize_t ret;
+
+ mutex_lock(&msc->buf_mutex);
+ if (msc->mbuf)
+ mode = msc->mbuf->name;
+ ret = scnprintf(buf, PAGE_SIZE, "%s\n", mode);
+ mutex_unlock(&msc->buf_mutex);
- return scnprintf(buf, PAGE_SIZE, "%s\n", msc_mode[msc->mode]);
+ return ret;
}
static ssize_t
mode_store(struct device *dev, struct device_attribute *attr, const char *buf,
size_t size)
{
+ const struct msu_buffer *mbuf = NULL;
struct msc *msc = dev_get_drvdata(dev);
size_t len = size;
- char *cp;
+ char *cp, *mode;
int i, ret;
if (!capable(CAP_SYS_RAWIO))
@@ -1535,17 +1847,59 @@ mode_store(struct device *dev, struct device_attribute *attr, const char *buf,
if (cp)
len = cp - buf;
- for (i = 0; i < ARRAY_SIZE(msc_mode); i++)
- if (!strncmp(msc_mode[i], buf, len))
- goto found;
+ mode = kstrndup(buf, len, GFP_KERNEL);
+ i = match_string(msc_mode, ARRAY_SIZE(msc_mode), mode);
+ if (i >= 0)
+ goto found;
+
+ /* Buffer sinks only work with a usable IRQ */
+ if (!msc->do_irq) {
+ kfree(mode);
+ return -EINVAL;
+ }
+
+ mbuf = msu_buffer_get(mode);
+ kfree(mode);
+ if (mbuf)
+ goto found;
return -EINVAL;
found:
mutex_lock(&msc->buf_mutex);
+ ret = 0;
+
+ /* Same buffer: do nothing */
+ if (mbuf && mbuf == msc->mbuf) {
+ /* put the extra reference we just got */
+ msu_buffer_put(mbuf);
+ goto unlock;
+ }
+
ret = msc_buffer_unlocked_free_unless_used(msc);
- if (!ret)
- msc->mode = i;
+ if (ret)
+ goto unlock;
+
+ if (mbuf) {
+ void *mbuf_priv = mbuf->assign(dev, &i);
+
+ if (!mbuf_priv) {
+ ret = -ENOMEM;
+ goto unlock;
+ }
+
+ msc_buffer_unassign(msc);
+ msc->mbuf_priv = mbuf_priv;
+ msc->mbuf = mbuf;
+ } else {
+ msc_buffer_unassign(msc);
+ }
+
+ msc->mode = i;
+
+unlock:
+ if (ret && mbuf)
+ msu_buffer_put(mbuf);
mutex_unlock(&msc->buf_mutex);
return ret ? ret : size;
@@ -1667,7 +2021,12 @@ win_switch_store(struct device *dev, struct device_attribute *attr,
return -EINVAL;
mutex_lock(&msc->buf_mutex);
- if (msc->mode != MSC_MODE_MULTI)
+ /*
+ * Window switch can only happen in the "multi" mode.
+ * If a external buffer is engaged, they have the full
+ * control over window switching.
+ */
+ if (msc->mode != MSC_MODE_MULTI || msc->mbuf)
ret = -ENOTSUPP;
else
msc_win_switch(msc);
@@ -1720,10 +2079,7 @@ static int intel_th_msc_probe(struct intel_th_device *thdev)
msc->reg_base = base + msc->index * 0x100;
msc->msu_base = base;
- err = intel_th_msu_init(msc);
- if (err)
- return err;
-
+ INIT_WORK(&msc->work, msc_work);
err = intel_th_msc_init(msc);
if (err)
return err;
@@ -1739,7 +2095,6 @@ static void intel_th_msc_remove(struct intel_th_device *thdev)
int ret;
intel_th_msc_deactivate(thdev);
- intel_th_msu_deinit(msc);
/*
* Buffers should not be used at this point except if the
diff --git a/drivers/hwtracing/intel_th/msu.h b/drivers/hwtracing/intel_th/msu.h
index 13d9b141daaa..e771f509bd02 100644
--- a/drivers/hwtracing/intel_th/msu.h
+++ b/drivers/hwtracing/intel_th/msu.h
@@ -44,14 +44,6 @@ enum {
#define M0BLIE BIT(16)
#define M1BLIE BIT(24)
-/* MSC operating modes (MSC_MODE) */
-enum {
- MSC_MODE_SINGLE = 0,
- MSC_MODE_MULTI,
- MSC_MODE_EXI,
- MSC_MODE_DEBUG,
-};
-
/* MSCnSTS bits */
#define MSCSTS_WRAPSTAT BIT(1) /* Wrap occurred */
#define MSCSTS_PLE BIT(2) /* Pipeline Empty */
@@ -93,6 +85,16 @@ static inline unsigned long msc_data_sz(struct msc_block_desc *bdesc)
return bdesc->valid_dw * 4 - MSC_BDESC;
}
+static inline unsigned long msc_total_sz(struct msc_block_desc *bdesc)
+{
+ return bdesc->valid_dw * 4;
+}
+
+static inline unsigned long msc_block_sz(struct msc_block_desc *bdesc)
+{
+ return bdesc->block_sz * 64 - MSC_BDESC;
+}
+
static inline bool msc_block_wrapped(struct msc_block_desc *bdesc)
{
if (bdesc->hw_tag & (MSC_HW_TAG_BLOCKWRAP | MSC_HW_TAG_WINWRAP))
@@ -104,7 +106,7 @@ static inline bool msc_block_wrapped(struct msc_block_desc *bdesc)
static inline bool msc_block_last_written(struct msc_block_desc *bdesc)
{
if ((bdesc->hw_tag & MSC_HW_TAG_ENDBIT) ||
- (msc_data_sz(bdesc) != DATA_IN_PAGE))
+ (msc_data_sz(bdesc) != msc_block_sz(bdesc)))
return true;
return false;
diff --git a/drivers/interconnect/core.c b/drivers/interconnect/core.c
index 871eb4bc4efc..7b971228df38 100644
--- a/drivers/interconnect/core.c
+++ b/drivers/interconnect/core.c
@@ -29,6 +29,7 @@ static struct dentry *icc_debugfs_dir;
* @req_node: entry in list of requests for the particular @node
* @node: the interconnect node to which this constraint applies
* @dev: reference to the device that sets the constraints
+ * @tag: path tag (optional)
* @avg_bw: an integer describing the average bandwidth in kBps
* @peak_bw: an integer describing the peak bandwidth in kBps
*/
@@ -36,6 +37,7 @@ struct icc_req {
struct hlist_node req_node;
struct icc_node *node;
struct device *dev;
+ u32 tag;
u32 avg_bw;
u32 peak_bw;
};
@@ -203,8 +205,11 @@ static int aggregate_requests(struct icc_node *node)
node->avg_bw = 0;
node->peak_bw = 0;
+ if (p->pre_aggregate)
+ p->pre_aggregate(node);
+
hlist_for_each_entry(r, &node->req_list, req_node)
- p->aggregate(node, r->avg_bw, r->peak_bw,
+ p->aggregate(node, r->tag, r->avg_bw, r->peak_bw,
&node->avg_bw, &node->peak_bw);
return 0;
@@ -386,6 +391,26 @@ struct icc_path *of_icc_get(struct device *dev, const char *name)
EXPORT_SYMBOL_GPL(of_icc_get);
/**
+ * icc_set_tag() - set an optional tag on a path
+ * @path: the path we want to tag
+ * @tag: the tag value
+ *
+ * This function allows consumers to append a tag to the requests associated
+ * with a path, so that a different aggregation could be done based on this tag.
+ */
+void icc_set_tag(struct icc_path *path, u32 tag)
+{
+ int i;
+
+ if (!path)
+ return;
+
+ for (i = 0; i < path->num_nodes; i++)
+ path->reqs[i].tag = tag;
+}
+EXPORT_SYMBOL_GPL(icc_set_tag);
+
+/**
* icc_set_bw() - set bandwidth constraints on an interconnect path
* @path: reference to the path returned by icc_get()
* @avg_bw: average bandwidth in kilobytes per second
diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig
index d5e70ebc2410..6ab4012a059a 100644
--- a/drivers/interconnect/qcom/Kconfig
+++ b/drivers/interconnect/qcom/Kconfig
@@ -5,6 +5,15 @@ config INTERCONNECT_QCOM
help
Support for Qualcomm's Network-on-Chip interconnect hardware.
+config INTERCONNECT_QCOM_QCS404
+ tristate "Qualcomm QCS404 interconnect driver"
+ depends on INTERCONNECT_QCOM
+ depends on QCOM_SMD_RPM
+ select INTERCONNECT_QCOM_SMD_RPM
+ help
+ This is a driver for the Qualcomm Network-on-Chip on qcs404-based
+ platforms.
+
config INTERCONNECT_QCOM_SDM845
tristate "Qualcomm SDM845 interconnect driver"
depends on INTERCONNECT_QCOM
@@ -12,3 +21,6 @@ config INTERCONNECT_QCOM_SDM845
help
This is a driver for the Qualcomm Network-on-Chip on sdm845-based
platforms.
+
+config INTERCONNECT_QCOM_SMD_RPM
+ tristate
diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile
index 1c1cea690f92..67dafb783dec 100644
--- a/drivers/interconnect/qcom/Makefile
+++ b/drivers/interconnect/qcom/Makefile
@@ -1,5 +1,9 @@
# SPDX-License-Identifier: GPL-2.0
+qnoc-qcs404-objs := qcs404.o
qnoc-sdm845-objs := sdm845.o
+icc-smd-rpm-objs := smd-rpm.o
+obj-$(CONFIG_INTERCONNECT_QCOM_QCS404) += qnoc-qcs404.o
obj-$(CONFIG_INTERCONNECT_QCOM_SDM845) += qnoc-sdm845.o
+obj-$(CONFIG_INTERCONNECT_QCOM_SMD_RPM) += icc-smd-rpm.o
diff --git a/drivers/interconnect/qcom/qcs404.c b/drivers/interconnect/qcom/qcs404.c
new file mode 100644
index 000000000000..910081d6ddc0
--- /dev/null
+++ b/drivers/interconnect/qcom/qcs404.c
@@ -0,0 +1,539 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Linaro Ltd
+ */
+
+#include <dt-bindings/interconnect/qcom,qcs404.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/interconnect-provider.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "smd-rpm.h"
+
+#define RPM_BUS_MASTER_REQ 0x73616d62
+#define RPM_BUS_SLAVE_REQ 0x766c7362
+
+enum {
+ QCS404_MASTER_AMPSS_M0 = 1,
+ QCS404_MASTER_GRAPHICS_3D,
+ QCS404_MASTER_MDP_PORT0,
+ QCS404_SNOC_BIMC_1_MAS,
+ QCS404_MASTER_TCU_0,
+ QCS404_MASTER_SPDM,
+ QCS404_MASTER_BLSP_1,
+ QCS404_MASTER_BLSP_2,
+ QCS404_MASTER_XM_USB_HS1,
+ QCS404_MASTER_CRYPTO_CORE0,
+ QCS404_MASTER_SDCC_1,
+ QCS404_MASTER_SDCC_2,
+ QCS404_SNOC_PNOC_MAS,
+ QCS404_MASTER_QPIC,
+ QCS404_MASTER_QDSS_BAM,
+ QCS404_BIMC_SNOC_MAS,
+ QCS404_PNOC_SNOC_MAS,
+ QCS404_MASTER_QDSS_ETR,
+ QCS404_MASTER_EMAC,
+ QCS404_MASTER_PCIE,
+ QCS404_MASTER_USB3,
+ QCS404_PNOC_INT_0,
+ QCS404_PNOC_INT_2,
+ QCS404_PNOC_INT_3,
+ QCS404_PNOC_SLV_0,
+ QCS404_PNOC_SLV_1,
+ QCS404_PNOC_SLV_2,
+ QCS404_PNOC_SLV_3,
+ QCS404_PNOC_SLV_4,
+ QCS404_PNOC_SLV_6,
+ QCS404_PNOC_SLV_7,
+ QCS404_PNOC_SLV_8,
+ QCS404_PNOC_SLV_9,
+ QCS404_PNOC_SLV_10,
+ QCS404_PNOC_SLV_11,
+ QCS404_SNOC_QDSS_INT,
+ QCS404_SNOC_INT_0,
+ QCS404_SNOC_INT_1,
+ QCS404_SNOC_INT_2,
+ QCS404_SLAVE_EBI_CH0,
+ QCS404_BIMC_SNOC_SLV,
+ QCS404_SLAVE_SPDM_WRAPPER,
+ QCS404_SLAVE_PDM,
+ QCS404_SLAVE_PRNG,
+ QCS404_SLAVE_TCSR,
+ QCS404_SLAVE_SNOC_CFG,
+ QCS404_SLAVE_MESSAGE_RAM,
+ QCS404_SLAVE_DISPLAY_CFG,
+ QCS404_SLAVE_GRAPHICS_3D_CFG,
+ QCS404_SLAVE_BLSP_1,
+ QCS404_SLAVE_TLMM_NORTH,
+ QCS404_SLAVE_PCIE_1,
+ QCS404_SLAVE_EMAC_CFG,
+ QCS404_SLAVE_BLSP_2,
+ QCS404_SLAVE_TLMM_EAST,
+ QCS404_SLAVE_TCU,
+ QCS404_SLAVE_PMIC_ARB,
+ QCS404_SLAVE_SDCC_1,
+ QCS404_SLAVE_SDCC_2,
+ QCS404_SLAVE_TLMM_SOUTH,
+ QCS404_SLAVE_USB_HS,
+ QCS404_SLAVE_USB3,
+ QCS404_SLAVE_CRYPTO_0_CFG,
+ QCS404_PNOC_SNOC_SLV,
+ QCS404_SLAVE_APPSS,
+ QCS404_SLAVE_WCSS,
+ QCS404_SNOC_BIMC_1_SLV,
+ QCS404_SLAVE_OCIMEM,
+ QCS404_SNOC_PNOC_SLV,
+ QCS404_SLAVE_QDSS_STM,
+ QCS404_SLAVE_CATS_128,
+ QCS404_SLAVE_OCMEM_64,
+ QCS404_SLAVE_LPASS,
+};
+
+#define to_qcom_provider(_provider) \
+ container_of(_provider, struct qcom_icc_provider, provider)
+
+static const struct clk_bulk_data bus_clocks[] = {
+ { .id = "bus" },
+ { .id = "bus_a" },
+};
+
+/**
+ * struct qcom_icc_provider - Qualcomm specific interconnect provider
+ * @provider: generic interconnect provider
+ * @bus_clks: the clk_bulk_data table of bus clocks
+ * @num_clks: the total number of clk_bulk_data entries
+ */
+struct qcom_icc_provider {
+ struct icc_provider provider;
+ struct clk_bulk_data *bus_clks;
+ int num_clks;
+};
+
+#define QCS404_MAX_LINKS 12
+
+/**
+ * struct qcom_icc_node - Qualcomm specific interconnect nodes
+ * @name: the node name used in debugfs
+ * @id: a unique node identifier
+ * @links: an array of nodes where we can go next while traversing
+ * @num_links: the total number of @links
+ * @buswidth: width of the interconnect between a node and the bus (bytes)
+ * @mas_rpm_id: RPM id for devices that are bus masters
+ * @slv_rpm_id: RPM id for devices that are bus slaves
+ * @rate: current bus clock rate in Hz
+ */
+struct qcom_icc_node {
+ unsigned char *name;
+ u16 id;
+ u16 links[QCS404_MAX_LINKS];
+ u16 num_links;
+ u16 buswidth;
+ int mas_rpm_id;
+ int slv_rpm_id;
+ u64 rate;
+};
+
+struct qcom_icc_desc {
+ struct qcom_icc_node **nodes;
+ size_t num_nodes;
+};
+
+#define DEFINE_QNODE(_name, _id, _buswidth, _mas_rpm_id, _slv_rpm_id, \
+ ...) \
+ static struct qcom_icc_node _name = { \
+ .name = #_name, \
+ .id = _id, \
+ .buswidth = _buswidth, \
+ .mas_rpm_id = _mas_rpm_id, \
+ .slv_rpm_id = _slv_rpm_id, \
+ .num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })), \
+ .links = { __VA_ARGS__ }, \
+ }
+
+DEFINE_QNODE(mas_apps_proc, QCS404_MASTER_AMPSS_M0, 8, 0, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV);
+DEFINE_QNODE(mas_oxili, QCS404_MASTER_GRAPHICS_3D, 8, 6, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV);
+DEFINE_QNODE(mas_mdp, QCS404_MASTER_MDP_PORT0, 8, 8, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV);
+DEFINE_QNODE(mas_snoc_bimc_1, QCS404_SNOC_BIMC_1_MAS, 8, 76, -1, QCS404_SLAVE_EBI_CH0);
+DEFINE_QNODE(mas_tcu_0, QCS404_MASTER_TCU_0, 8, -1, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV);
+DEFINE_QNODE(mas_spdm, QCS404_MASTER_SPDM, 4, -1, -1, QCS404_PNOC_INT_3);
+DEFINE_QNODE(mas_blsp_1, QCS404_MASTER_BLSP_1, 4, 41, -1, QCS404_PNOC_INT_3);
+DEFINE_QNODE(mas_blsp_2, QCS404_MASTER_BLSP_2, 4, 39, -1, QCS404_PNOC_INT_3);
+DEFINE_QNODE(mas_xi_usb_hs1, QCS404_MASTER_XM_USB_HS1, 8, 138, -1, QCS404_PNOC_INT_0);
+DEFINE_QNODE(mas_crypto, QCS404_MASTER_CRYPTO_CORE0, 8, 23, -1, QCS404_PNOC_SNOC_SLV, QCS404_PNOC_INT_2);
+DEFINE_QNODE(mas_sdcc_1, QCS404_MASTER_SDCC_1, 8, 33, -1, QCS404_PNOC_INT_0);
+DEFINE_QNODE(mas_sdcc_2, QCS404_MASTER_SDCC_2, 8, 35, -1, QCS404_PNOC_INT_0);
+DEFINE_QNODE(mas_snoc_pcnoc, QCS404_SNOC_PNOC_MAS, 8, 77, -1, QCS404_PNOC_INT_2);
+DEFINE_QNODE(mas_qpic, QCS404_MASTER_QPIC, 4, -1, -1, QCS404_PNOC_INT_0);
+DEFINE_QNODE(mas_qdss_bam, QCS404_MASTER_QDSS_BAM, 4, -1, -1, QCS404_SNOC_QDSS_INT);
+DEFINE_QNODE(mas_bimc_snoc, QCS404_BIMC_SNOC_MAS, 8, 21, -1, QCS404_SLAVE_OCMEM_64, QCS404_SLAVE_CATS_128, QCS404_SNOC_INT_0, QCS404_SNOC_INT_1);
+DEFINE_QNODE(mas_pcnoc_snoc, QCS404_PNOC_SNOC_MAS, 8, 29, -1, QCS404_SNOC_BIMC_1_SLV, QCS404_SNOC_INT_2, QCS404_SNOC_INT_0);
+DEFINE_QNODE(mas_qdss_etr, QCS404_MASTER_QDSS_ETR, 8, -1, -1, QCS404_SNOC_QDSS_INT);
+DEFINE_QNODE(mas_emac, QCS404_MASTER_EMAC, 8, -1, -1, QCS404_SNOC_BIMC_1_SLV, QCS404_SNOC_INT_1);
+DEFINE_QNODE(mas_pcie, QCS404_MASTER_PCIE, 8, -1, -1, QCS404_SNOC_BIMC_1_SLV, QCS404_SNOC_INT_1);
+DEFINE_QNODE(mas_usb3, QCS404_MASTER_USB3, 8, -1, -1, QCS404_SNOC_BIMC_1_SLV, QCS404_SNOC_INT_1);
+DEFINE_QNODE(pcnoc_int_0, QCS404_PNOC_INT_0, 8, 85, 114, QCS404_PNOC_SNOC_SLV, QCS404_PNOC_INT_2);
+DEFINE_QNODE(pcnoc_int_2, QCS404_PNOC_INT_2, 8, 124, 184, QCS404_PNOC_SLV_10, QCS404_SLAVE_TCU, QCS404_PNOC_SLV_11, QCS404_PNOC_SLV_2, QCS404_PNOC_SLV_3, QCS404_PNOC_SLV_0, QCS404_PNOC_SLV_1, QCS404_PNOC_SLV_6, QCS404_PNOC_SLV_7, QCS404_PNOC_SLV_4, QCS404_PNOC_SLV_8, QCS404_PNOC_SLV_9);
+DEFINE_QNODE(pcnoc_int_3, QCS404_PNOC_INT_3, 8, 125, 185, QCS404_PNOC_SNOC_SLV);
+DEFINE_QNODE(pcnoc_s_0, QCS404_PNOC_SLV_0, 4, 89, 118, QCS404_SLAVE_PRNG, QCS404_SLAVE_SPDM_WRAPPER, QCS404_SLAVE_PDM);
+DEFINE_QNODE(pcnoc_s_1, QCS404_PNOC_SLV_1, 4, 90, 119, QCS404_SLAVE_TCSR);
+DEFINE_QNODE(pcnoc_s_2, QCS404_PNOC_SLV_2, 4, -1, -1, QCS404_SLAVE_GRAPHICS_3D_CFG);
+DEFINE_QNODE(pcnoc_s_3, QCS404_PNOC_SLV_3, 4, 92, 121, QCS404_SLAVE_MESSAGE_RAM);
+DEFINE_QNODE(pcnoc_s_4, QCS404_PNOC_SLV_4, 4, 93, 122, QCS404_SLAVE_SNOC_CFG);
+DEFINE_QNODE(pcnoc_s_6, QCS404_PNOC_SLV_6, 4, 94, 123, QCS404_SLAVE_BLSP_1, QCS404_SLAVE_TLMM_NORTH, QCS404_SLAVE_EMAC_CFG);
+DEFINE_QNODE(pcnoc_s_7, QCS404_PNOC_SLV_7, 4, 95, 124, QCS404_SLAVE_TLMM_SOUTH, QCS404_SLAVE_DISPLAY_CFG, QCS404_SLAVE_SDCC_1, QCS404_SLAVE_PCIE_1, QCS404_SLAVE_SDCC_2);
+DEFINE_QNODE(pcnoc_s_8, QCS404_PNOC_SLV_8, 4, 96, 125, QCS404_SLAVE_CRYPTO_0_CFG);
+DEFINE_QNODE(pcnoc_s_9, QCS404_PNOC_SLV_9, 4, 97, 126, QCS404_SLAVE_BLSP_2, QCS404_SLAVE_TLMM_EAST, QCS404_SLAVE_PMIC_ARB);
+DEFINE_QNODE(pcnoc_s_10, QCS404_PNOC_SLV_10, 4, 157, -1, QCS404_SLAVE_USB_HS);
+DEFINE_QNODE(pcnoc_s_11, QCS404_PNOC_SLV_11, 4, 158, 246, QCS404_SLAVE_USB3);
+DEFINE_QNODE(qdss_int, QCS404_SNOC_QDSS_INT, 8, -1, -1, QCS404_SNOC_BIMC_1_SLV, QCS404_SNOC_INT_1);
+DEFINE_QNODE(snoc_int_0, QCS404_SNOC_INT_0, 8, 99, 130, QCS404_SLAVE_LPASS, QCS404_SLAVE_APPSS, QCS404_SLAVE_WCSS);
+DEFINE_QNODE(snoc_int_1, QCS404_SNOC_INT_1, 8, 100, 131, QCS404_SNOC_PNOC_SLV, QCS404_SNOC_INT_2);
+DEFINE_QNODE(snoc_int_2, QCS404_SNOC_INT_2, 8, 134, 197, QCS404_SLAVE_QDSS_STM, QCS404_SLAVE_OCIMEM);
+DEFINE_QNODE(slv_ebi, QCS404_SLAVE_EBI_CH0, 8, -1, 0, 0);
+DEFINE_QNODE(slv_bimc_snoc, QCS404_BIMC_SNOC_SLV, 8, -1, 2, QCS404_BIMC_SNOC_MAS);
+DEFINE_QNODE(slv_spdm, QCS404_SLAVE_SPDM_WRAPPER, 4, -1, -1, 0);
+DEFINE_QNODE(slv_pdm, QCS404_SLAVE_PDM, 4, -1, 41, 0);
+DEFINE_QNODE(slv_prng, QCS404_SLAVE_PRNG, 4, -1, 44, 0);
+DEFINE_QNODE(slv_tcsr, QCS404_SLAVE_TCSR, 4, -1, 50, 0);
+DEFINE_QNODE(slv_snoc_cfg, QCS404_SLAVE_SNOC_CFG, 4, -1, 70, 0);
+DEFINE_QNODE(slv_message_ram, QCS404_SLAVE_MESSAGE_RAM, 4, -1, 55, 0);
+DEFINE_QNODE(slv_disp_ss_cfg, QCS404_SLAVE_DISPLAY_CFG, 4, -1, -1, 0);
+DEFINE_QNODE(slv_gpu_cfg, QCS404_SLAVE_GRAPHICS_3D_CFG, 4, -1, -1, 0);
+DEFINE_QNODE(slv_blsp_1, QCS404_SLAVE_BLSP_1, 4, -1, 39, 0);
+DEFINE_QNODE(slv_tlmm_north, QCS404_SLAVE_TLMM_NORTH, 4, -1, 214, 0);
+DEFINE_QNODE(slv_pcie, QCS404_SLAVE_PCIE_1, 4, -1, -1, 0);
+DEFINE_QNODE(slv_ethernet, QCS404_SLAVE_EMAC_CFG, 4, -1, -1, 0);
+DEFINE_QNODE(slv_blsp_2, QCS404_SLAVE_BLSP_2, 4, -1, 37, 0);
+DEFINE_QNODE(slv_tlmm_east, QCS404_SLAVE_TLMM_EAST, 4, -1, 213, 0);
+DEFINE_QNODE(slv_tcu, QCS404_SLAVE_TCU, 8, -1, -1, 0);
+DEFINE_QNODE(slv_pmic_arb, QCS404_SLAVE_PMIC_ARB, 4, -1, 59, 0);
+DEFINE_QNODE(slv_sdcc_1, QCS404_SLAVE_SDCC_1, 4, -1, 31, 0);
+DEFINE_QNODE(slv_sdcc_2, QCS404_SLAVE_SDCC_2, 4, -1, 33, 0);
+DEFINE_QNODE(slv_tlmm_south, QCS404_SLAVE_TLMM_SOUTH, 4, -1, -1, 0);
+DEFINE_QNODE(slv_usb_hs, QCS404_SLAVE_USB_HS, 4, -1, 40, 0);
+DEFINE_QNODE(slv_usb3, QCS404_SLAVE_USB3, 4, -1, 22, 0);
+DEFINE_QNODE(slv_crypto_0_cfg, QCS404_SLAVE_CRYPTO_0_CFG, 4, -1, 52, 0);
+DEFINE_QNODE(slv_pcnoc_snoc, QCS404_PNOC_SNOC_SLV, 8, -1, 45, QCS404_PNOC_SNOC_MAS);
+DEFINE_QNODE(slv_kpss_ahb, QCS404_SLAVE_APPSS, 4, -1, -1, 0);
+DEFINE_QNODE(slv_wcss, QCS404_SLAVE_WCSS, 4, -1, 23, 0);
+DEFINE_QNODE(slv_snoc_bimc_1, QCS404_SNOC_BIMC_1_SLV, 8, -1, 104, QCS404_SNOC_BIMC_1_MAS);
+DEFINE_QNODE(slv_imem, QCS404_SLAVE_OCIMEM, 8, -1, 26, 0);
+DEFINE_QNODE(slv_snoc_pcnoc, QCS404_SNOC_PNOC_SLV, 8, -1, 28, QCS404_SNOC_PNOC_MAS);
+DEFINE_QNODE(slv_qdss_stm, QCS404_SLAVE_QDSS_STM, 4, -1, 30, 0);
+DEFINE_QNODE(slv_cats_0, QCS404_SLAVE_CATS_128, 16, -1, -1, 0);
+DEFINE_QNODE(slv_cats_1, QCS404_SLAVE_OCMEM_64, 8, -1, -1, 0);
+DEFINE_QNODE(slv_lpass, QCS404_SLAVE_LPASS, 4, -1, -1, 0);
+
+static struct qcom_icc_node *qcs404_bimc_nodes[] = {
+ [MASTER_AMPSS_M0] = &mas_apps_proc,
+ [MASTER_OXILI] = &mas_oxili,
+ [MASTER_MDP_PORT0] = &mas_mdp,
+ [MASTER_SNOC_BIMC_1] = &mas_snoc_bimc_1,
+ [MASTER_TCU_0] = &mas_tcu_0,
+ [SLAVE_EBI_CH0] = &slv_ebi,
+ [SLAVE_BIMC_SNOC] = &slv_bimc_snoc,
+};
+
+static struct qcom_icc_desc qcs404_bimc = {
+ .nodes = qcs404_bimc_nodes,
+ .num_nodes = ARRAY_SIZE(qcs404_bimc_nodes),
+};
+
+static struct qcom_icc_node *qcs404_pcnoc_nodes[] = {
+ [MASTER_SPDM] = &mas_spdm,
+ [MASTER_BLSP_1] = &mas_blsp_1,
+ [MASTER_BLSP_2] = &mas_blsp_2,
+ [MASTER_XI_USB_HS1] = &mas_xi_usb_hs1,
+ [MASTER_CRYPT0] = &mas_crypto,
+ [MASTER_SDCC_1] = &mas_sdcc_1,
+ [MASTER_SDCC_2] = &mas_sdcc_2,
+ [MASTER_SNOC_PCNOC] = &mas_snoc_pcnoc,
+ [MASTER_QPIC] = &mas_qpic,
+ [PCNOC_INT_0] = &pcnoc_int_0,
+ [PCNOC_INT_2] = &pcnoc_int_2,
+ [PCNOC_INT_3] = &pcnoc_int_3,
+ [PCNOC_S_0] = &pcnoc_s_0,
+ [PCNOC_S_1] = &pcnoc_s_1,
+ [PCNOC_S_2] = &pcnoc_s_2,
+ [PCNOC_S_3] = &pcnoc_s_3,
+ [PCNOC_S_4] = &pcnoc_s_4,
+ [PCNOC_S_6] = &pcnoc_s_6,
+ [PCNOC_S_7] = &pcnoc_s_7,
+ [PCNOC_S_8] = &pcnoc_s_8,
+ [PCNOC_S_9] = &pcnoc_s_9,
+ [PCNOC_S_10] = &pcnoc_s_10,
+ [PCNOC_S_11] = &pcnoc_s_11,
+ [SLAVE_SPDM] = &slv_spdm,
+ [SLAVE_PDM] = &slv_pdm,
+ [SLAVE_PRNG] = &slv_prng,
+ [SLAVE_TCSR] = &slv_tcsr,
+ [SLAVE_SNOC_CFG] = &slv_snoc_cfg,
+ [SLAVE_MESSAGE_RAM] = &slv_message_ram,
+ [SLAVE_DISP_SS_CFG] = &slv_disp_ss_cfg,
+ [SLAVE_GPU_CFG] = &slv_gpu_cfg,
+ [SLAVE_BLSP_1] = &slv_blsp_1,
+ [SLAVE_BLSP_2] = &slv_blsp_2,
+ [SLAVE_TLMM_NORTH] = &slv_tlmm_north,
+ [SLAVE_PCIE] = &slv_pcie,
+ [SLAVE_ETHERNET] = &slv_ethernet,
+ [SLAVE_TLMM_EAST] = &slv_tlmm_east,
+ [SLAVE_TCU] = &slv_tcu,
+ [SLAVE_PMIC_ARB] = &slv_pmic_arb,
+ [SLAVE_SDCC_1] = &slv_sdcc_1,
+ [SLAVE_SDCC_2] = &slv_sdcc_2,
+ [SLAVE_TLMM_SOUTH] = &slv_tlmm_south,
+ [SLAVE_USB_HS] = &slv_usb_hs,
+ [SLAVE_USB3] = &slv_usb3,
+ [SLAVE_CRYPTO_0_CFG] = &slv_crypto_0_cfg,
+ [SLAVE_PCNOC_SNOC] = &slv_pcnoc_snoc,
+};
+
+static struct qcom_icc_desc qcs404_pcnoc = {
+ .nodes = qcs404_pcnoc_nodes,
+ .num_nodes = ARRAY_SIZE(qcs404_pcnoc_nodes),
+};
+
+static struct qcom_icc_node *qcs404_snoc_nodes[] = {
+ [MASTER_QDSS_BAM] = &mas_qdss_bam,
+ [MASTER_BIMC_SNOC] = &mas_bimc_snoc,
+ [MASTER_PCNOC_SNOC] = &mas_pcnoc_snoc,
+ [MASTER_QDSS_ETR] = &mas_qdss_etr,
+ [MASTER_EMAC] = &mas_emac,
+ [MASTER_PCIE] = &mas_pcie,
+ [MASTER_USB3] = &mas_usb3,
+ [QDSS_INT] = &qdss_int,
+ [SNOC_INT_0] = &snoc_int_0,
+ [SNOC_INT_1] = &snoc_int_1,
+ [SNOC_INT_2] = &snoc_int_2,
+ [SLAVE_KPSS_AHB] = &slv_kpss_ahb,
+ [SLAVE_WCSS] = &slv_wcss,
+ [SLAVE_SNOC_BIMC_1] = &slv_snoc_bimc_1,
+ [SLAVE_IMEM] = &slv_imem,
+ [SLAVE_SNOC_PCNOC] = &slv_snoc_pcnoc,
+ [SLAVE_QDSS_STM] = &slv_qdss_stm,
+ [SLAVE_CATS_0] = &slv_cats_0,
+ [SLAVE_CATS_1] = &slv_cats_1,
+ [SLAVE_LPASS] = &slv_lpass,
+};
+
+static struct qcom_icc_desc qcs404_snoc = {
+ .nodes = qcs404_snoc_nodes,
+ .num_nodes = ARRAY_SIZE(qcs404_snoc_nodes),
+};
+
+static int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
+ u32 peak_bw, u32 *agg_avg, u32 *agg_peak)
+{
+ *agg_avg += avg_bw;
+ *agg_peak = max(*agg_peak, peak_bw);
+
+ return 0;
+}
+
+static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
+{
+ struct qcom_icc_provider *qp;
+ struct qcom_icc_node *qn;
+ struct icc_provider *provider;
+ struct icc_node *n;
+ u64 sum_bw;
+ u64 max_peak_bw;
+ u64 rate;
+ u32 agg_avg = 0;
+ u32 agg_peak = 0;
+ int ret, i;
+
+ qn = src->data;
+ provider = src->provider;
+ qp = to_qcom_provider(provider);
+
+ list_for_each_entry(n, &provider->nodes, node_list)
+ qcom_icc_aggregate(n, 0, n->avg_bw, n->peak_bw,
+ &agg_avg, &agg_peak);
+
+ sum_bw = icc_units_to_bps(agg_avg);
+ max_peak_bw = icc_units_to_bps(agg_peak);
+
+ /* send bandwidth request message to the RPM processor */
+ if (qn->mas_rpm_id != -1) {
+ ret = qcom_icc_rpm_smd_send(QCOM_SMD_RPM_ACTIVE_STATE,
+ RPM_BUS_MASTER_REQ,
+ qn->mas_rpm_id,
+ sum_bw);
+ if (ret) {
+ pr_err("qcom_icc_rpm_smd_send mas %d error %d\n",
+ qn->mas_rpm_id, ret);
+ return ret;
+ }
+ }
+
+ if (qn->slv_rpm_id != -1) {
+ ret = qcom_icc_rpm_smd_send(QCOM_SMD_RPM_ACTIVE_STATE,
+ RPM_BUS_SLAVE_REQ,
+ qn->slv_rpm_id,
+ sum_bw);
+ if (ret) {
+ pr_err("qcom_icc_rpm_smd_send slv error %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ rate = max(sum_bw, max_peak_bw);
+
+ do_div(rate, qn->buswidth);
+
+ if (qn->rate == rate)
+ return 0;
+
+ for (i = 0; i < qp->num_clks; i++) {
+ ret = clk_set_rate(qp->bus_clks[i].clk, rate);
+ if (ret) {
+ pr_err("%s clk_set_rate error: %d\n",
+ qp->bus_clks[i].id, ret);
+ return ret;
+ }
+ }
+
+ qn->rate = rate;
+
+ return 0;
+}
+
+static int qnoc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct qcom_icc_desc *desc;
+ struct icc_onecell_data *data;
+ struct icc_provider *provider;
+ struct qcom_icc_node **qnodes;
+ struct qcom_icc_provider *qp;
+ struct icc_node *node;
+ size_t num_nodes, i;
+ int ret;
+
+ /* wait for the RPM proxy */
+ if (!qcom_icc_rpm_smd_available())
+ return -EPROBE_DEFER;
+
+ desc = of_device_get_match_data(dev);
+ if (!desc)
+ return -EINVAL;
+
+ qnodes = desc->nodes;
+ num_nodes = desc->num_nodes;
+
+ qp = devm_kzalloc(dev, sizeof(*qp), GFP_KERNEL);
+ if (!qp)
+ return -ENOMEM;
+
+ data = devm_kcalloc(dev, num_nodes, sizeof(*node), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ qp->bus_clks = devm_kmemdup(dev, bus_clocks, sizeof(bus_clocks),
+ GFP_KERNEL);
+ if (!qp->bus_clks)
+ return -ENOMEM;
+
+ qp->num_clks = ARRAY_SIZE(bus_clocks);
+ ret = devm_clk_bulk_get(dev, qp->num_clks, qp->bus_clks);
+ if (ret)
+ return ret;
+
+ ret = clk_bulk_prepare_enable(qp->num_clks, qp->bus_clks);
+ if (ret)
+ return ret;
+
+ provider = &qp->provider;
+ INIT_LIST_HEAD(&provider->nodes);
+ provider->dev = dev;
+ provider->set = qcom_icc_set;
+ provider->aggregate = qcom_icc_aggregate;
+ provider->xlate = of_icc_xlate_onecell;
+ provider->data = data;
+
+ ret = icc_provider_add(provider);
+ if (ret) {
+ dev_err(dev, "error adding interconnect provider: %d\n", ret);
+ clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
+ return ret;
+ }
+
+ for (i = 0; i < num_nodes; i++) {
+ size_t j;
+
+ node = icc_node_create(qnodes[i]->id);
+ if (IS_ERR(node)) {
+ ret = PTR_ERR(node);
+ goto err;
+ }
+
+ node->name = qnodes[i]->name;
+ node->data = qnodes[i];
+ icc_node_add(node, provider);
+
+ dev_dbg(dev, "registered node %s\n", node->name);
+
+ /* populate links */
+ for (j = 0; j < qnodes[i]->num_links; j++)
+ icc_link_create(node, qnodes[i]->links[j]);
+
+ data->nodes[i] = node;
+ }
+ data->num_nodes = num_nodes;
+
+ platform_set_drvdata(pdev, qp);
+
+ return 0;
+err:
+ list_for_each_entry(node, &provider->nodes, node_list) {
+ icc_node_del(node);
+ icc_node_destroy(node->id);
+ }
+ clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
+ icc_provider_del(provider);
+
+ return ret;
+}
+
+static int qnoc_remove(struct platform_device *pdev)
+{
+ struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
+ struct icc_provider *provider = &qp->provider;
+ struct icc_node *n;
+
+ list_for_each_entry(n, &provider->nodes, node_list) {
+ icc_node_del(n);
+ icc_node_destroy(n->id);
+ }
+ clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
+
+ return icc_provider_del(provider);
+}
+
+static const struct of_device_id qcs404_noc_of_match[] = {
+ { .compatible = "qcom,qcs404-bimc", .data = &qcs404_bimc },
+ { .compatible = "qcom,qcs404-pcnoc", .data = &qcs404_pcnoc },
+ { .compatible = "qcom,qcs404-snoc", .data = &qcs404_snoc },
+ { },
+};
+MODULE_DEVICE_TABLE(of, qcs404_noc_of_match);
+
+static struct platform_driver qcs404_noc_driver = {
+ .probe = qnoc_probe,
+ .remove = qnoc_remove,
+ .driver = {
+ .name = "qnoc-qcs404",
+ .of_match_table = qcs404_noc_of_match,
+ },
+};
+module_platform_driver(qcs404_noc_driver);
+MODULE_DESCRIPTION("Qualcomm QCS404 NoC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/interconnect/qcom/sdm845.c b/drivers/interconnect/qcom/sdm845.c
index 4915b78da673..57955596bb59 100644
--- a/drivers/interconnect/qcom/sdm845.c
+++ b/drivers/interconnect/qcom/sdm845.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
*
*/
@@ -20,23 +20,6 @@
#include <soc/qcom/rpmh.h>
#include <soc/qcom/tcs.h>
-#define BCM_TCS_CMD_COMMIT_SHFT 30
-#define BCM_TCS_CMD_COMMIT_MASK 0x40000000
-#define BCM_TCS_CMD_VALID_SHFT 29
-#define BCM_TCS_CMD_VALID_MASK 0x20000000
-#define BCM_TCS_CMD_VOTE_X_SHFT 14
-#define BCM_TCS_CMD_VOTE_MASK 0x3fff
-#define BCM_TCS_CMD_VOTE_Y_SHFT 0
-#define BCM_TCS_CMD_VOTE_Y_MASK 0xfffc000
-
-#define BCM_TCS_CMD(commit, valid, vote_x, vote_y) \
- (((commit) << BCM_TCS_CMD_COMMIT_SHFT) | \
- ((valid) << BCM_TCS_CMD_VALID_SHFT) | \
- ((cpu_to_le32(vote_x) & \
- BCM_TCS_CMD_VOTE_MASK) << BCM_TCS_CMD_VOTE_X_SHFT) | \
- ((cpu_to_le32(vote_y) & \
- BCM_TCS_CMD_VOTE_MASK) << BCM_TCS_CMD_VOTE_Y_SHFT))
-
#define to_qcom_provider(_provider) \
container_of(_provider, struct qcom_icc_provider, provider)
@@ -66,6 +49,22 @@ struct bcm_db {
#define SDM845_MAX_BCM_PER_NODE 2
#define SDM845_MAX_VCD 10
+/*
+ * The AMC bucket denotes constraints that are applied to hardware when
+ * icc_set_bw() completes, whereas the WAKE and SLEEP constraints are applied
+ * when the execution environment transitions between active and low power mode.
+ */
+#define QCOM_ICC_BUCKET_AMC 0
+#define QCOM_ICC_BUCKET_WAKE 1
+#define QCOM_ICC_BUCKET_SLEEP 2
+#define QCOM_ICC_NUM_BUCKETS 3
+#define QCOM_ICC_TAG_AMC BIT(QCOM_ICC_BUCKET_AMC)
+#define QCOM_ICC_TAG_WAKE BIT(QCOM_ICC_BUCKET_WAKE)
+#define QCOM_ICC_TAG_SLEEP BIT(QCOM_ICC_BUCKET_SLEEP)
+#define QCOM_ICC_TAG_ACTIVE_ONLY (QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE)
+#define QCOM_ICC_TAG_ALWAYS (QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE |\
+ QCOM_ICC_TAG_SLEEP)
+
/**
* struct qcom_icc_node - Qualcomm specific interconnect nodes
* @name: the node name used in debugfs
@@ -86,8 +85,8 @@ struct qcom_icc_node {
u16 num_links;
u16 channels;
u16 buswidth;
- u64 sum_avg;
- u64 max_peak;
+ u64 sum_avg[QCOM_ICC_NUM_BUCKETS];
+ u64 max_peak[QCOM_ICC_NUM_BUCKETS];
struct qcom_icc_bcm *bcms[SDM845_MAX_BCM_PER_NODE];
size_t num_bcms;
};
@@ -112,8 +111,8 @@ struct qcom_icc_bcm {
const char *name;
u32 type;
u32 addr;
- u64 vote_x;
- u64 vote_y;
+ u64 vote_x[QCOM_ICC_NUM_BUCKETS];
+ u64 vote_y[QCOM_ICC_NUM_BUCKETS];
bool dirty;
bool keepalive;
struct bcm_db aux_data;
@@ -555,7 +554,7 @@ inline void tcs_cmd_gen(struct tcs_cmd *cmd, u64 vote_x, u64 vote_y,
cmd->wait = true;
}
-static void tcs_list_gen(struct list_head *bcm_list,
+static void tcs_list_gen(struct list_head *bcm_list, int bucket,
struct tcs_cmd tcs_list[SDM845_MAX_VCD],
int n[SDM845_MAX_VCD])
{
@@ -573,8 +572,8 @@ static void tcs_list_gen(struct list_head *bcm_list,
commit = true;
cur_vcd_size = 0;
}
- tcs_cmd_gen(&tcs_list[idx], bcm->vote_x, bcm->vote_y,
- bcm->addr, commit);
+ tcs_cmd_gen(&tcs_list[idx], bcm->vote_x[bucket],
+ bcm->vote_y[bucket], bcm->addr, commit);
idx++;
n[batch]++;
/*
@@ -595,38 +594,56 @@ static void tcs_list_gen(struct list_head *bcm_list,
static void bcm_aggregate(struct qcom_icc_bcm *bcm)
{
- size_t i;
- u64 agg_avg = 0;
- u64 agg_peak = 0;
+ size_t i, bucket;
+ u64 agg_avg[QCOM_ICC_NUM_BUCKETS] = {0};
+ u64 agg_peak[QCOM_ICC_NUM_BUCKETS] = {0};
u64 temp;
- for (i = 0; i < bcm->num_nodes; i++) {
- temp = bcm->nodes[i]->sum_avg * bcm->aux_data.width;
- do_div(temp, bcm->nodes[i]->buswidth * bcm->nodes[i]->channels);
- agg_avg = max(agg_avg, temp);
+ for (bucket = 0; bucket < QCOM_ICC_NUM_BUCKETS; bucket++) {
+ for (i = 0; i < bcm->num_nodes; i++) {
+ temp = bcm->nodes[i]->sum_avg[bucket] * bcm->aux_data.width;
+ do_div(temp, bcm->nodes[i]->buswidth * bcm->nodes[i]->channels);
+ agg_avg[bucket] = max(agg_avg[bucket], temp);
- temp = bcm->nodes[i]->max_peak * bcm->aux_data.width;
- do_div(temp, bcm->nodes[i]->buswidth);
- agg_peak = max(agg_peak, temp);
- }
+ temp = bcm->nodes[i]->max_peak[bucket] * bcm->aux_data.width;
+ do_div(temp, bcm->nodes[i]->buswidth);
+ agg_peak[bucket] = max(agg_peak[bucket], temp);
+ }
- temp = agg_avg * 1000ULL;
- do_div(temp, bcm->aux_data.unit);
- bcm->vote_x = temp;
+ temp = agg_avg[bucket] * 1000ULL;
+ do_div(temp, bcm->aux_data.unit);
+ bcm->vote_x[bucket] = temp;
- temp = agg_peak * 1000ULL;
- do_div(temp, bcm->aux_data.unit);
- bcm->vote_y = temp;
+ temp = agg_peak[bucket] * 1000ULL;
+ do_div(temp, bcm->aux_data.unit);
+ bcm->vote_y[bucket] = temp;
+ }
- if (bcm->keepalive && bcm->vote_x == 0 && bcm->vote_y == 0) {
- bcm->vote_x = 1;
- bcm->vote_y = 1;
+ if (bcm->keepalive && bcm->vote_x[QCOM_ICC_BUCKET_AMC] == 0 &&
+ bcm->vote_y[QCOM_ICC_BUCKET_AMC] == 0) {
+ bcm->vote_x[QCOM_ICC_BUCKET_AMC] = 1;
+ bcm->vote_x[QCOM_ICC_BUCKET_WAKE] = 1;
+ bcm->vote_y[QCOM_ICC_BUCKET_AMC] = 1;
+ bcm->vote_y[QCOM_ICC_BUCKET_WAKE] = 1;
}
bcm->dirty = false;
}
-static int qcom_icc_aggregate(struct icc_node *node, u32 avg_bw,
+static void qcom_icc_pre_aggregate(struct icc_node *node)
+{
+ size_t i;
+ struct qcom_icc_node *qn;
+
+ qn = node->data;
+
+ for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
+ qn->sum_avg[i] = 0;
+ qn->max_peak[i] = 0;
+ }
+}
+
+static int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
u32 peak_bw, u32 *agg_avg, u32 *agg_peak)
{
size_t i;
@@ -634,12 +651,19 @@ static int qcom_icc_aggregate(struct icc_node *node, u32 avg_bw,
qn = node->data;
+ if (!tag)
+ tag = QCOM_ICC_TAG_ALWAYS;
+
+ for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
+ if (tag & BIT(i)) {
+ qn->sum_avg[i] += avg_bw;
+ qn->max_peak[i] = max_t(u32, qn->max_peak[i], peak_bw);
+ }
+ }
+
*agg_avg += avg_bw;
*agg_peak = max_t(u32, *agg_peak, peak_bw);
- qn->sum_avg = *agg_avg;
- qn->max_peak = *agg_peak;
-
for (i = 0; i < qn->num_bcms; i++)
qn->bcms[i]->dirty = true;
@@ -675,7 +699,7 @@ static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
* Construct the command list based on a pre ordered list of BCMs
* based on VCD.
*/
- tcs_list_gen(&commit_list, cmds, commit_idx);
+ tcs_list_gen(&commit_list, QCOM_ICC_BUCKET_AMC, cmds, commit_idx);
if (!commit_idx[0])
return ret;
@@ -693,6 +717,41 @@ static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
return ret;
}
+ INIT_LIST_HEAD(&commit_list);
+
+ for (i = 0; i < qp->num_bcms; i++) {
+ /*
+ * Only generate WAKE and SLEEP commands if a resource's
+ * requirements change as the execution environment transitions
+ * between different power states.
+ */
+ if (qp->bcms[i]->vote_x[QCOM_ICC_BUCKET_WAKE] !=
+ qp->bcms[i]->vote_x[QCOM_ICC_BUCKET_SLEEP] ||
+ qp->bcms[i]->vote_y[QCOM_ICC_BUCKET_WAKE] !=
+ qp->bcms[i]->vote_y[QCOM_ICC_BUCKET_SLEEP]) {
+ list_add_tail(&qp->bcms[i]->list, &commit_list);
+ }
+ }
+
+ if (list_empty(&commit_list))
+ return ret;
+
+ tcs_list_gen(&commit_list, QCOM_ICC_BUCKET_WAKE, cmds, commit_idx);
+
+ ret = rpmh_write_batch(qp->dev, RPMH_WAKE_ONLY_STATE, cmds, commit_idx);
+ if (ret) {
+ pr_err("Error sending WAKE RPMH requests (%d)\n", ret);
+ return ret;
+ }
+
+ tcs_list_gen(&commit_list, QCOM_ICC_BUCKET_SLEEP, cmds, commit_idx);
+
+ ret = rpmh_write_batch(qp->dev, RPMH_SLEEP_STATE, cmds, commit_idx);
+ if (ret) {
+ pr_err("Error sending SLEEP RPMH requests (%d)\n", ret);
+ return ret;
+ }
+
return ret;
}
@@ -738,6 +797,7 @@ static int qnoc_probe(struct platform_device *pdev)
provider = &qp->provider;
provider->dev = &pdev->dev;
provider->set = qcom_icc_set;
+ provider->pre_aggregate = qcom_icc_pre_aggregate;
provider->aggregate = qcom_icc_aggregate;
provider->xlate = of_icc_xlate_onecell;
INIT_LIST_HEAD(&provider->nodes);
diff --git a/drivers/interconnect/qcom/smd-rpm.c b/drivers/interconnect/qcom/smd-rpm.c
new file mode 100644
index 000000000000..dc8ff8d133a9
--- /dev/null
+++ b/drivers/interconnect/qcom/smd-rpm.c
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RPM over SMD communication wrapper for interconnects
+ *
+ * Copyright (C) 2019 Linaro Ltd
+ * Author: Georgi Djakov <georgi.djakov@linaro.org>
+ */
+
+#include <linux/interconnect-provider.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/soc/qcom/smd-rpm.h>
+
+#include "smd-rpm.h"
+
+#define RPM_KEY_BW 0x00007762
+
+static struct qcom_smd_rpm *icc_smd_rpm;
+
+struct icc_rpm_smd_req {
+ __le32 key;
+ __le32 nbytes;
+ __le32 value;
+};
+
+bool qcom_icc_rpm_smd_available(void)
+{
+ return !!icc_smd_rpm;
+}
+EXPORT_SYMBOL_GPL(qcom_icc_rpm_smd_available);
+
+int qcom_icc_rpm_smd_send(int ctx, int rsc_type, int id, u32 val)
+{
+ struct icc_rpm_smd_req req = {
+ .key = cpu_to_le32(RPM_KEY_BW),
+ .nbytes = cpu_to_le32(sizeof(u32)),
+ .value = cpu_to_le32(val),
+ };
+
+ return qcom_rpm_smd_write(icc_smd_rpm, ctx, rsc_type, id, &req,
+ sizeof(req));
+}
+EXPORT_SYMBOL_GPL(qcom_icc_rpm_smd_send);
+
+static int qcom_icc_rpm_smd_remove(struct platform_device *pdev)
+{
+ icc_smd_rpm = NULL;
+
+ return 0;
+}
+
+static int qcom_icc_rpm_smd_probe(struct platform_device *pdev)
+{
+ icc_smd_rpm = dev_get_drvdata(pdev->dev.parent);
+
+ if (!icc_smd_rpm) {
+ dev_err(&pdev->dev, "unable to retrieve handle to RPM\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static struct platform_driver qcom_interconnect_rpm_smd_driver = {
+ .driver = {
+ .name = "icc_smd_rpm",
+ },
+ .probe = qcom_icc_rpm_smd_probe,
+ .remove = qcom_icc_rpm_smd_remove,
+};
+module_platform_driver(qcom_interconnect_rpm_smd_driver);
+MODULE_AUTHOR("Georgi Djakov <georgi.djakov@linaro.org>");
+MODULE_DESCRIPTION("Qualcomm SMD RPM interconnect proxy driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:icc_smd_rpm");
diff --git a/drivers/interconnect/qcom/smd-rpm.h b/drivers/interconnect/qcom/smd-rpm.h
new file mode 100644
index 000000000000..ca9d0327b8ac
--- /dev/null
+++ b/drivers/interconnect/qcom/smd-rpm.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019, Linaro Ltd.
+ * Author: Georgi Djakov <georgi.djakov@linaro.org>
+ */
+
+#ifndef __DRIVERS_INTERCONNECT_QCOM_SMD_RPM_H
+#define __DRIVERS_INTERCONNECT_QCOM_SMD_RPM_H
+
+#include <linux/soc/qcom/smd-rpm.h>
+
+bool qcom_icc_rpm_smd_available(void);
+int qcom_icc_rpm_smd_send(int ctx, int rsc_type, int id, u32 val);
+
+#endif
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 45b61b8d8442..c55b63750757 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -362,15 +362,6 @@ config DS1682
This driver can also be built as a module. If so, the module
will be called ds1682.
-config SPEAR13XX_PCIE_GADGET
- bool "PCIe gadget support for SPEAr13XX platform"
- depends on ARCH_SPEAR13XX && BROKEN
- help
- This option enables gadget support for PCIe controller. If
- board file defines any controller as PCIe endpoint then a sysfs
- entry will be created for that controller. User can use these
- sysfs node to configure PCIe EP as per his requirements.
-
config VMWARE_BALLOON
tristate "VMware Balloon Driver"
depends on VMWARE_VMCI && X86 && HYPERVISOR_GUEST
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 8dae0a976200..c1860d35dc7e 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -36,7 +36,6 @@ obj-$(CONFIG_C2PORT) += c2port/
obj-$(CONFIG_HMC6352) += hmc6352.o
obj-y += eeprom/
obj-y += cb710/
-obj-$(CONFIG_SPEAR13XX_PCIE_GADGET) += spear13xx_pcie_gadget.o
obj-$(CONFIG_VMWARE_BALLOON) += vmw_balloon.o
obj-$(CONFIG_PCH_PHUB) += pch_phub.o
obj-y += ti-st/
diff --git a/drivers/misc/cardreader/alcor_pci.c b/drivers/misc/cardreader/alcor_pci.c
index bcb10fa4bc3a..259fe1dfec03 100644
--- a/drivers/misc/cardreader/alcor_pci.c
+++ b/drivers/misc/cardreader/alcor_pci.c
@@ -334,8 +334,7 @@ static void alcor_pci_remove(struct pci_dev *pdev)
#ifdef CONFIG_PM_SLEEP
static int alcor_suspend(struct device *dev)
{
- struct pci_dev *pdev = to_pci_dev(dev);
- struct alcor_pci_priv *priv = pci_get_drvdata(pdev);
+ struct alcor_pci_priv *priv = dev_get_drvdata(dev);
alcor_pci_aspm_ctrl(priv, 1);
return 0;
@@ -344,8 +343,7 @@ static int alcor_suspend(struct device *dev)
static int alcor_resume(struct device *dev)
{
- struct pci_dev *pdev = to_pci_dev(dev);
- struct alcor_pci_priv *priv = pci_get_drvdata(pdev);
+ struct alcor_pci_priv *priv = dev_get_drvdata(dev);
alcor_pci_aspm_ctrl(priv, 0);
return 0;
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index f2abe27010ef..0f791bfdc1f5 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -45,13 +45,16 @@ config EEPROM_AT25
will be called at25.
config EEPROM_LEGACY
- tristate "Old I2C EEPROM reader"
+ tristate "Old I2C EEPROM reader (DEPRECATED)"
depends on I2C && SYSFS
help
If you say yes here you get read-only access to the EEPROM data
available on modern memory DIMMs and Sony Vaio laptops via I2C. Such
EEPROMs could theoretically be available on other devices as well.
+ This driver is deprecated and will be removed soon, please use the
+ better at24 driver instead.
+
This driver can also be built as a module. If so, the module
will be called eeprom.
diff --git a/drivers/misc/eeprom/ee1004.c b/drivers/misc/eeprom/ee1004.c
index 6f00c33cfe22..b081c67416d7 100644
--- a/drivers/misc/eeprom/ee1004.c
+++ b/drivers/misc/eeprom/ee1004.c
@@ -195,13 +195,13 @@ static int ee1004_probe(struct i2c_client *client,
mutex_lock(&ee1004_bus_lock);
if (++ee1004_dev_count == 1) {
for (cnr = 0; cnr < 2; cnr++) {
- ee1004_set_page[cnr] = i2c_new_dummy(client->adapter,
+ ee1004_set_page[cnr] = i2c_new_dummy_device(client->adapter,
EE1004_ADDR_SET_PAGE + cnr);
- if (!ee1004_set_page[cnr]) {
+ if (IS_ERR(ee1004_set_page[cnr])) {
dev_err(&client->dev,
"address 0x%02x unavailable\n",
EE1004_ADDR_SET_PAGE + cnr);
- err = -EADDRINUSE;
+ err = PTR_ERR(ee1004_set_page[cnr]);
goto err_clients;
}
}
diff --git a/drivers/misc/eeprom/max6875.c b/drivers/misc/eeprom/max6875.c
index 4d0cb90f4aeb..9da81f6d4a1c 100644
--- a/drivers/misc/eeprom/max6875.c
+++ b/drivers/misc/eeprom/max6875.c
@@ -150,9 +150,9 @@ static int max6875_probe(struct i2c_client *client,
return -ENOMEM;
/* A fake client is created on the odd address */
- data->fake_client = i2c_new_dummy(client->adapter, client->addr + 1);
- if (!data->fake_client) {
- err = -ENOMEM;
+ data->fake_client = i2c_new_dummy_device(client->adapter, client->addr + 1);
+ if (IS_ERR(data->fake_client)) {
+ err = PTR_ERR(data->fake_client);
goto exit_kfree;
}
diff --git a/drivers/misc/fastrpc.c b/drivers/misc/fastrpc.c
index 98603e235cf0..47ae84afac2e 100644
--- a/drivers/misc/fastrpc.c
+++ b/drivers/misc/fastrpc.c
@@ -33,7 +33,6 @@
#define FASTRPC_INIT_HANDLE 1
#define FASTRPC_CTXID_MASK (0xFF0)
#define INIT_FILELEN_MAX (64 * 1024 * 1024)
-#define INIT_MEMLEN_MAX (8 * 1024 * 1024)
#define FASTRPC_DEVICE_NAME "fastrpc"
/* Retrives number of input buffers from the scalars parameter */
@@ -186,6 +185,7 @@ struct fastrpc_channel_ctx {
struct idr ctx_idr;
struct list_head users;
struct miscdevice miscdev;
+ struct kref refcount;
};
struct fastrpc_user {
@@ -279,8 +279,11 @@ static int fastrpc_buf_alloc(struct fastrpc_user *fl, struct device *dev,
buf->virt = dma_alloc_coherent(dev, buf->size, (dma_addr_t *)&buf->phys,
GFP_KERNEL);
- if (!buf->virt)
+ if (!buf->virt) {
+ mutex_destroy(&buf->lock);
+ kfree(buf);
return -ENOMEM;
+ }
if (fl->sctx && fl->sctx->sid)
buf->phys += ((u64)fl->sctx->sid << 32);
@@ -290,6 +293,25 @@ static int fastrpc_buf_alloc(struct fastrpc_user *fl, struct device *dev,
return 0;
}
+static void fastrpc_channel_ctx_free(struct kref *ref)
+{
+ struct fastrpc_channel_ctx *cctx;
+
+ cctx = container_of(ref, struct fastrpc_channel_ctx, refcount);
+
+ kfree(cctx);
+}
+
+static void fastrpc_channel_ctx_get(struct fastrpc_channel_ctx *cctx)
+{
+ kref_get(&cctx->refcount);
+}
+
+static void fastrpc_channel_ctx_put(struct fastrpc_channel_ctx *cctx)
+{
+ kref_put(&cctx->refcount, fastrpc_channel_ctx_free);
+}
+
static void fastrpc_context_free(struct kref *ref)
{
struct fastrpc_invoke_ctx *ctx;
@@ -313,6 +335,8 @@ static void fastrpc_context_free(struct kref *ref)
kfree(ctx->maps);
kfree(ctx->olaps);
kfree(ctx);
+
+ fastrpc_channel_ctx_put(cctx);
}
static void fastrpc_context_get(struct fastrpc_invoke_ctx *ctx)
@@ -419,6 +443,9 @@ static struct fastrpc_invoke_ctx *fastrpc_context_alloc(
fastrpc_get_buff_overlaps(ctx);
}
+ /* Released in fastrpc_context_put() */
+ fastrpc_channel_ctx_get(cctx);
+
ctx->sc = sc;
ctx->retval = -1;
ctx->pid = current->pid;
@@ -448,6 +475,7 @@ err_idr:
spin_lock(&user->lock);
list_del(&ctx->node);
spin_unlock(&user->lock);
+ fastrpc_channel_ctx_put(cctx);
kfree(ctx->maps);
kfree(ctx->olaps);
kfree(ctx);
@@ -522,6 +550,7 @@ static void fastrpc_dma_buf_detatch(struct dma_buf *dmabuf,
mutex_lock(&buffer->lock);
list_del(&a->node);
mutex_unlock(&buffer->lock);
+ sg_free_table(&a->sgt);
kfree(a);
}
@@ -884,6 +913,9 @@ static int fastrpc_internal_invoke(struct fastrpc_user *fl, u32 kernel,
if (!fl->sctx)
return -EINVAL;
+ if (!fl->cctx->rpdev)
+ return -EPIPE;
+
ctx = fastrpc_context_alloc(fl, kernel, sc, args);
if (IS_ERR(ctx))
return PTR_ERR(ctx);
@@ -1120,6 +1152,7 @@ static int fastrpc_device_release(struct inode *inode, struct file *file)
}
fastrpc_session_free(cctx, fl->sctx);
+ fastrpc_channel_ctx_put(cctx);
mutex_destroy(&fl->mutex);
kfree(fl);
@@ -1138,6 +1171,9 @@ static int fastrpc_device_open(struct inode *inode, struct file *filp)
if (!fl)
return -ENOMEM;
+ /* Released in fastrpc_device_release() */
+ fastrpc_channel_ctx_get(cctx);
+
filp->private_data = fl;
spin_lock_init(&fl->lock);
mutex_init(&fl->mutex);
@@ -1163,26 +1199,6 @@ static int fastrpc_device_open(struct inode *inode, struct file *filp)
return 0;
}
-static int fastrpc_dmabuf_free(struct fastrpc_user *fl, char __user *argp)
-{
- struct dma_buf *buf;
- int info;
-
- if (copy_from_user(&info, argp, sizeof(info)))
- return -EFAULT;
-
- buf = dma_buf_get(info);
- if (IS_ERR_OR_NULL(buf))
- return -EINVAL;
- /*
- * one for the last get and other for the ALLOC_DMA_BUFF ioctl
- */
- dma_buf_put(buf);
- dma_buf_put(buf);
-
- return 0;
-}
-
static int fastrpc_dmabuf_alloc(struct fastrpc_user *fl, char __user *argp)
{
struct fastrpc_alloc_dma_buf bp;
@@ -1218,8 +1234,6 @@ static int fastrpc_dmabuf_alloc(struct fastrpc_user *fl, char __user *argp)
return -EFAULT;
}
- get_dma_buf(buf->dmabuf);
-
return 0;
}
@@ -1287,9 +1301,6 @@ static long fastrpc_device_ioctl(struct file *file, unsigned int cmd,
case FASTRPC_IOCTL_INIT_CREATE:
err = fastrpc_init_create_process(fl, argp);
break;
- case FASTRPC_IOCTL_FREE_DMA_BUFF:
- err = fastrpc_dmabuf_free(fl, argp);
- break;
case FASTRPC_IOCTL_ALLOC_DMA_BUFF:
err = fastrpc_dmabuf_alloc(fl, argp);
break;
@@ -1395,10 +1406,6 @@ static int fastrpc_rpmsg_probe(struct rpmsg_device *rpdev)
int i, err, domain_id = -1;
const char *domain;
- data = devm_kzalloc(rdev, sizeof(*data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
err = of_property_read_string(rdev->of_node, "label", &domain);
if (err) {
dev_info(rdev, "FastRPC Domain not specified in DT\n");
@@ -1417,6 +1424,10 @@ static int fastrpc_rpmsg_probe(struct rpmsg_device *rpdev)
return -EINVAL;
}
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
data->miscdev.minor = MISC_DYNAMIC_MINOR;
data->miscdev.name = kasprintf(GFP_KERNEL, "fastrpc-%s",
domains[domain_id]);
@@ -1425,6 +1436,8 @@ static int fastrpc_rpmsg_probe(struct rpmsg_device *rpdev)
if (err)
return err;
+ kref_init(&data->refcount);
+
dev_set_drvdata(&rpdev->dev, data);
dma_set_mask_and_coherent(rdev, DMA_BIT_MASK(32));
INIT_LIST_HEAD(&data->users);
@@ -1459,7 +1472,9 @@ static void fastrpc_rpmsg_remove(struct rpmsg_device *rpdev)
misc_deregister(&cctx->miscdev);
of_platform_depopulate(&rpdev->dev);
- kfree(cctx);
+
+ cctx->rpdev = NULL;
+ fastrpc_channel_ctx_put(cctx);
}
static int fastrpc_rpmsg_callback(struct rpmsg_device *rpdev, void *data,
diff --git a/drivers/misc/habanalabs/asid.c b/drivers/misc/habanalabs/asid.c
index 2c01461701a3..a2fdf31cf27c 100644
--- a/drivers/misc/habanalabs/asid.c
+++ b/drivers/misc/habanalabs/asid.c
@@ -18,7 +18,7 @@ int hl_asid_init(struct hl_device *hdev)
mutex_init(&hdev->asid_mutex);
- /* ASID 0 is reserved for KMD and device CPU */
+ /* ASID 0 is reserved for the kernel driver and device CPU */
set_bit(0, hdev->asid_bitmap);
return 0;
diff --git a/drivers/misc/habanalabs/command_buffer.c b/drivers/misc/habanalabs/command_buffer.c
index e495f44064fa..53fddbd8e693 100644
--- a/drivers/misc/habanalabs/command_buffer.c
+++ b/drivers/misc/habanalabs/command_buffer.c
@@ -397,7 +397,8 @@ struct hl_cb *hl_cb_kernel_create(struct hl_device *hdev, u32 cb_size)
rc = hl_cb_create(hdev, &hdev->kernel_cb_mgr, cb_size, &cb_handle,
HL_KERNEL_ASID_ID);
if (rc) {
- dev_err(hdev->dev, "Failed to allocate CB for KMD %d\n", rc);
+ dev_err(hdev->dev,
+ "Failed to allocate CB for the kernel driver %d\n", rc);
return NULL;
}
diff --git a/drivers/misc/habanalabs/command_submission.c b/drivers/misc/habanalabs/command_submission.c
index f00d1c32f6d6..a9ac045dcfde 100644
--- a/drivers/misc/habanalabs/command_submission.c
+++ b/drivers/misc/habanalabs/command_submission.c
@@ -178,11 +178,23 @@ static void cs_do_release(struct kref *ref)
/* We also need to update CI for internal queues */
if (cs->submitted) {
- int cs_cnt = atomic_dec_return(&hdev->cs_active_cnt);
+ hdev->asic_funcs->hw_queues_lock(hdev);
- WARN_ONCE((cs_cnt < 0),
- "hl%d: error in CS active cnt %d\n",
- hdev->id, cs_cnt);
+ hdev->cs_active_cnt--;
+ if (!hdev->cs_active_cnt) {
+ struct hl_device_idle_busy_ts *ts;
+
+ ts = &hdev->idle_busy_ts_arr[hdev->idle_busy_ts_idx++];
+ ts->busy_to_idle_ts = ktime_get();
+
+ if (hdev->idle_busy_ts_idx == HL_IDLE_BUSY_TS_ARR_SIZE)
+ hdev->idle_busy_ts_idx = 0;
+ } else if (hdev->cs_active_cnt < 0) {
+ dev_crit(hdev->dev, "CS active cnt %d is negative\n",
+ hdev->cs_active_cnt);
+ }
+
+ hdev->asic_funcs->hw_queues_unlock(hdev);
hl_int_hw_queue_update_ci(cs);
@@ -305,6 +317,8 @@ static int allocate_cs(struct hl_device *hdev, struct hl_ctx *ctx,
other = ctx->cs_pending[fence->cs_seq & (HL_MAX_PENDING_CS - 1)];
if ((other) && (!dma_fence_is_signaled(other))) {
spin_unlock(&ctx->cs_lock);
+ dev_dbg(hdev->dev,
+ "Rejecting CS because of too many in-flights CS\n");
rc = -EAGAIN;
goto free_fence;
}
@@ -395,8 +409,9 @@ static struct hl_cb *validate_queue_index(struct hl_device *hdev,
return NULL;
}
- if (hw_queue_prop->kmd_only) {
- dev_err(hdev->dev, "Queue index %d is restricted for KMD\n",
+ if (hw_queue_prop->driver_only) {
+ dev_err(hdev->dev,
+ "Queue index %d is restricted for the kernel driver\n",
chunk->queue_index);
return NULL;
} else if (hw_queue_prop->type == QUEUE_TYPE_INT) {
diff --git a/drivers/misc/habanalabs/context.c b/drivers/misc/habanalabs/context.c
index 8682590e3f6e..17db7b3dfb4c 100644
--- a/drivers/misc/habanalabs/context.c
+++ b/drivers/misc/habanalabs/context.c
@@ -26,12 +26,13 @@ static void hl_ctx_fini(struct hl_ctx *ctx)
dma_fence_put(ctx->cs_pending[i]);
if (ctx->asid != HL_KERNEL_ASID_ID) {
- /*
- * The engines are stopped as there is no executing CS, but the
+ /* The engines are stopped as there is no executing CS, but the
* Coresight might be still working by accessing addresses
* related to the stopped engines. Hence stop it explicitly.
+ * Stop only if this is the compute context, as there can be
+ * only one compute context
*/
- if (hdev->in_debug)
+ if ((hdev->in_debug) && (hdev->compute_ctx == ctx))
hl_device_set_debug_mode(hdev, false);
hl_vm_ctx_fini(ctx);
@@ -67,29 +68,36 @@ int hl_ctx_create(struct hl_device *hdev, struct hl_fpriv *hpriv)
goto out_err;
}
+ mutex_lock(&mgr->ctx_lock);
+ rc = idr_alloc(&mgr->ctx_handles, ctx, 1, 0, GFP_KERNEL);
+ mutex_unlock(&mgr->ctx_lock);
+
+ if (rc < 0) {
+ dev_err(hdev->dev, "Failed to allocate IDR for a new CTX\n");
+ goto free_ctx;
+ }
+
+ ctx->handle = rc;
+
rc = hl_ctx_init(hdev, ctx, false);
if (rc)
- goto free_ctx;
+ goto remove_from_idr;
hl_hpriv_get(hpriv);
ctx->hpriv = hpriv;
- /* TODO: remove for multiple contexts */
+ /* TODO: remove for multiple contexts per process */
hpriv->ctx = ctx;
- hdev->user_ctx = ctx;
- mutex_lock(&mgr->ctx_lock);
- rc = idr_alloc(&mgr->ctx_handles, ctx, 1, 0, GFP_KERNEL);
- mutex_unlock(&mgr->ctx_lock);
-
- if (rc < 0) {
- dev_err(hdev->dev, "Failed to allocate IDR for a new CTX\n");
- hl_ctx_free(hdev, ctx);
- goto out_err;
- }
+ /* TODO: remove the following line for multiple process support */
+ hdev->compute_ctx = ctx;
return 0;
+remove_from_idr:
+ mutex_lock(&mgr->ctx_lock);
+ idr_remove(&mgr->ctx_handles, ctx->handle);
+ mutex_unlock(&mgr->ctx_lock);
free_ctx:
kfree(ctx);
out_err:
@@ -120,7 +128,7 @@ int hl_ctx_init(struct hl_device *hdev, struct hl_ctx *ctx, bool is_kernel_ctx)
ctx->thread_ctx_switch_wait_token = 0;
if (is_kernel_ctx) {
- ctx->asid = HL_KERNEL_ASID_ID; /* KMD gets ASID 0 */
+ ctx->asid = HL_KERNEL_ASID_ID; /* Kernel driver gets ASID 0 */
rc = hl_mmu_ctx_init(ctx);
if (rc) {
dev_err(hdev->dev, "Failed to init mmu ctx module\n");
diff --git a/drivers/misc/habanalabs/debugfs.c b/drivers/misc/habanalabs/debugfs.c
index 18e499c900c7..87f37ac31ccd 100644
--- a/drivers/misc/habanalabs/debugfs.c
+++ b/drivers/misc/habanalabs/debugfs.c
@@ -29,7 +29,7 @@ static int hl_debugfs_i2c_read(struct hl_device *hdev, u8 i2c_bus, u8 i2c_addr,
memset(&pkt, 0, sizeof(pkt));
- pkt.ctl = __cpu_to_le32(ARMCP_PACKET_I2C_RD <<
+ pkt.ctl = cpu_to_le32(ARMCP_PACKET_I2C_RD <<
ARMCP_PKT_CTL_OPCODE_SHIFT);
pkt.i2c_bus = i2c_bus;
pkt.i2c_addr = i2c_addr;
@@ -55,12 +55,12 @@ static int hl_debugfs_i2c_write(struct hl_device *hdev, u8 i2c_bus, u8 i2c_addr,
memset(&pkt, 0, sizeof(pkt));
- pkt.ctl = __cpu_to_le32(ARMCP_PACKET_I2C_WR <<
+ pkt.ctl = cpu_to_le32(ARMCP_PACKET_I2C_WR <<
ARMCP_PKT_CTL_OPCODE_SHIFT);
pkt.i2c_bus = i2c_bus;
pkt.i2c_addr = i2c_addr;
pkt.i2c_reg = i2c_reg;
- pkt.value = __cpu_to_le64(val);
+ pkt.value = cpu_to_le64(val);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
HL_DEVICE_TIMEOUT_USEC, NULL);
@@ -81,10 +81,10 @@ static void hl_debugfs_led_set(struct hl_device *hdev, u8 led, u8 state)
memset(&pkt, 0, sizeof(pkt));
- pkt.ctl = __cpu_to_le32(ARMCP_PACKET_LED_SET <<
+ pkt.ctl = cpu_to_le32(ARMCP_PACKET_LED_SET <<
ARMCP_PKT_CTL_OPCODE_SHIFT);
- pkt.led_index = __cpu_to_le32(led);
- pkt.value = __cpu_to_le64(state);
+ pkt.led_index = cpu_to_le32(led);
+ pkt.value = cpu_to_le64(state);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
HL_DEVICE_TIMEOUT_USEC, NULL);
@@ -370,7 +370,7 @@ static int mmu_show(struct seq_file *s, void *data)
if (dev_entry->mmu_asid == HL_KERNEL_ASID_ID)
ctx = hdev->kernel_ctx;
else
- ctx = hdev->user_ctx;
+ ctx = hdev->compute_ctx;
if (!ctx) {
dev_err(hdev->dev, "no ctx available\n");
@@ -533,7 +533,7 @@ out:
static int device_va_to_pa(struct hl_device *hdev, u64 virt_addr,
u64 *phys_addr)
{
- struct hl_ctx *ctx = hdev->user_ctx;
+ struct hl_ctx *ctx = hdev->compute_ctx;
u64 hop_addr, hop_pte_addr, hop_pte;
u64 offset_mask = HOP4_MASK | OFFSET_MASK;
int rc = 0;
diff --git a/drivers/misc/habanalabs/device.c b/drivers/misc/habanalabs/device.c
index 7a8f9d0b71b5..459fee70a597 100644
--- a/drivers/misc/habanalabs/device.c
+++ b/drivers/misc/habanalabs/device.c
@@ -42,10 +42,12 @@ static void hpriv_release(struct kref *ref)
{
struct hl_fpriv *hpriv;
struct hl_device *hdev;
+ struct hl_ctx *ctx;
hpriv = container_of(ref, struct hl_fpriv, refcount);
hdev = hpriv->hdev;
+ ctx = hpriv->ctx;
put_pid(hpriv->taskpid);
@@ -53,13 +55,12 @@ static void hpriv_release(struct kref *ref)
mutex_destroy(&hpriv->restore_phase_mutex);
- kfree(hpriv);
-
- /* Now the FD is really closed */
- atomic_dec(&hdev->fd_open_cnt);
+ mutex_lock(&hdev->fpriv_list_lock);
+ list_del(&hpriv->dev_node);
+ hdev->compute_ctx = NULL;
+ mutex_unlock(&hdev->fpriv_list_lock);
- /* This allows a new user context to open the device */
- hdev->user_ctx = NULL;
+ kfree(hpriv);
}
void hl_hpriv_get(struct hl_fpriv *hpriv)
@@ -94,6 +95,24 @@ static int hl_device_release(struct inode *inode, struct file *filp)
return 0;
}
+static int hl_device_release_ctrl(struct inode *inode, struct file *filp)
+{
+ struct hl_fpriv *hpriv = filp->private_data;
+ struct hl_device *hdev;
+
+ filp->private_data = NULL;
+
+ hdev = hpriv->hdev;
+
+ mutex_lock(&hdev->fpriv_list_lock);
+ list_del(&hpriv->dev_node);
+ mutex_unlock(&hdev->fpriv_list_lock);
+
+ kfree(hpriv);
+
+ return 0;
+}
+
/*
* hl_mmap - mmap function for habanalabs device
*
@@ -124,55 +143,102 @@ static const struct file_operations hl_ops = {
.compat_ioctl = hl_ioctl
};
+static const struct file_operations hl_ctrl_ops = {
+ .owner = THIS_MODULE,
+ .open = hl_device_open_ctrl,
+ .release = hl_device_release_ctrl,
+ .unlocked_ioctl = hl_ioctl_control,
+ .compat_ioctl = hl_ioctl_control
+};
+
+static void device_release_func(struct device *dev)
+{
+ kfree(dev);
+}
+
/*
- * device_setup_cdev - setup cdev and device for habanalabs device
+ * device_init_cdev - Initialize cdev and device for habanalabs device
*
* @hdev: pointer to habanalabs device structure
* @hclass: pointer to the class object of the device
* @minor: minor number of the specific device
- * @fpos : file operations to install for this device
+ * @fpos: file operations to install for this device
+ * @name: name of the device as it will appear in the filesystem
+ * @cdev: pointer to the char device object that will be initialized
+ * @dev: pointer to the device object that will be initialized
*
- * Create a cdev and a Linux device for habanalabs's device. Need to be
- * called at the end of the habanalabs device initialization process,
- * because this function exposes the device to the user
+ * Initialize a cdev and a Linux device for habanalabs's device.
*/
-static int device_setup_cdev(struct hl_device *hdev, struct class *hclass,
- int minor, const struct file_operations *fops)
+static int device_init_cdev(struct hl_device *hdev, struct class *hclass,
+ int minor, const struct file_operations *fops,
+ char *name, struct cdev *cdev,
+ struct device **dev)
{
- int err, devno = MKDEV(hdev->major, minor);
- struct cdev *hdev_cdev = &hdev->cdev;
- char *name;
+ cdev_init(cdev, fops);
+ cdev->owner = THIS_MODULE;
- name = kasprintf(GFP_KERNEL, "hl%d", hdev->id);
- if (!name)
+ *dev = kzalloc(sizeof(**dev), GFP_KERNEL);
+ if (!*dev)
return -ENOMEM;
- cdev_init(hdev_cdev, fops);
- hdev_cdev->owner = THIS_MODULE;
- err = cdev_add(hdev_cdev, devno, 1);
- if (err) {
- pr_err("Failed to add char device %s\n", name);
- goto err_cdev_add;
+ device_initialize(*dev);
+ (*dev)->devt = MKDEV(hdev->major, minor);
+ (*dev)->class = hclass;
+ (*dev)->release = device_release_func;
+ dev_set_drvdata(*dev, hdev);
+ dev_set_name(*dev, "%s", name);
+
+ return 0;
+}
+
+static int device_cdev_sysfs_add(struct hl_device *hdev)
+{
+ int rc;
+
+ rc = cdev_device_add(&hdev->cdev, hdev->dev);
+ if (rc) {
+ dev_err(hdev->dev,
+ "failed to add a char device to the system\n");
+ return rc;
}
- hdev->dev = device_create(hclass, NULL, devno, NULL, "%s", name);
- if (IS_ERR(hdev->dev)) {
- pr_err("Failed to create device %s\n", name);
- err = PTR_ERR(hdev->dev);
- goto err_device_create;
+ rc = cdev_device_add(&hdev->cdev_ctrl, hdev->dev_ctrl);
+ if (rc) {
+ dev_err(hdev->dev,
+ "failed to add a control char device to the system\n");
+ goto delete_cdev_device;
}
- dev_set_drvdata(hdev->dev, hdev);
+ /* hl_sysfs_init() must be done after adding the device to the system */
+ rc = hl_sysfs_init(hdev);
+ if (rc) {
+ dev_err(hdev->dev, "failed to initialize sysfs\n");
+ goto delete_ctrl_cdev_device;
+ }
- kfree(name);
+ hdev->cdev_sysfs_created = true;
return 0;
-err_device_create:
- cdev_del(hdev_cdev);
-err_cdev_add:
- kfree(name);
- return err;
+delete_ctrl_cdev_device:
+ cdev_device_del(&hdev->cdev_ctrl, hdev->dev_ctrl);
+delete_cdev_device:
+ cdev_device_del(&hdev->cdev, hdev->dev);
+ return rc;
+}
+
+static void device_cdev_sysfs_del(struct hl_device *hdev)
+{
+ /* device_release() won't be called so must free devices explicitly */
+ if (!hdev->cdev_sysfs_created) {
+ kfree(hdev->dev_ctrl);
+ kfree(hdev->dev);
+ return;
+ }
+
+ hl_sysfs_fini(hdev);
+ cdev_device_del(&hdev->cdev_ctrl, hdev->dev_ctrl);
+ cdev_device_del(&hdev->cdev, hdev->dev);
}
/*
@@ -227,20 +293,29 @@ static int device_early_init(struct hl_device *hdev)
goto free_eq_wq;
}
+ hdev->idle_busy_ts_arr = kmalloc_array(HL_IDLE_BUSY_TS_ARR_SIZE,
+ sizeof(struct hl_device_idle_busy_ts),
+ (GFP_KERNEL | __GFP_ZERO));
+ if (!hdev->idle_busy_ts_arr) {
+ rc = -ENOMEM;
+ goto free_chip_info;
+ }
+
hl_cb_mgr_init(&hdev->kernel_cb_mgr);
- mutex_init(&hdev->fd_open_cnt_lock);
mutex_init(&hdev->send_cpu_message_lock);
mutex_init(&hdev->debug_lock);
mutex_init(&hdev->mmu_cache_lock);
INIT_LIST_HEAD(&hdev->hw_queues_mirror_list);
spin_lock_init(&hdev->hw_queues_mirror_lock);
+ INIT_LIST_HEAD(&hdev->fpriv_list);
+ mutex_init(&hdev->fpriv_list_lock);
atomic_set(&hdev->in_reset, 0);
- atomic_set(&hdev->fd_open_cnt, 0);
- atomic_set(&hdev->cs_active_cnt, 0);
return 0;
+free_chip_info:
+ kfree(hdev->hl_chip_info);
free_eq_wq:
destroy_workqueue(hdev->eq_wq);
free_cq_wq:
@@ -266,8 +341,11 @@ static void device_early_fini(struct hl_device *hdev)
mutex_destroy(&hdev->debug_lock);
mutex_destroy(&hdev->send_cpu_message_lock);
+ mutex_destroy(&hdev->fpriv_list_lock);
+
hl_cb_mgr_fini(hdev, &hdev->kernel_cb_mgr);
+ kfree(hdev->idle_busy_ts_arr);
kfree(hdev->hl_chip_info);
destroy_workqueue(hdev->eq_wq);
@@ -277,8 +355,6 @@ static void device_early_fini(struct hl_device *hdev)
if (hdev->asic_funcs->early_fini)
hdev->asic_funcs->early_fini(hdev);
-
- mutex_destroy(&hdev->fd_open_cnt_lock);
}
static void set_freq_to_low_job(struct work_struct *work)
@@ -286,9 +362,13 @@ static void set_freq_to_low_job(struct work_struct *work)
struct hl_device *hdev = container_of(work, struct hl_device,
work_freq.work);
- if (atomic_read(&hdev->fd_open_cnt) == 0)
+ mutex_lock(&hdev->fpriv_list_lock);
+
+ if (!hdev->compute_ctx)
hl_device_set_frequency(hdev, PLL_LOW);
+ mutex_unlock(&hdev->fpriv_list_lock);
+
schedule_delayed_work(&hdev->work_freq,
usecs_to_jiffies(HL_PLL_LOW_JOB_FREQ_USEC));
}
@@ -338,7 +418,7 @@ static int device_late_init(struct hl_device *hdev)
hdev->high_pll = hdev->asic_prop.high_pll;
/* force setting to low frequency */
- atomic_set(&hdev->curr_pll_profile, PLL_LOW);
+ hdev->curr_pll_profile = PLL_LOW;
if (hdev->pm_mng_profile == PM_AUTO)
hdev->asic_funcs->set_pll_profile(hdev, PLL_LOW);
@@ -381,44 +461,128 @@ static void device_late_fini(struct hl_device *hdev)
hdev->late_init_done = false;
}
+uint32_t hl_device_utilization(struct hl_device *hdev, uint32_t period_ms)
+{
+ struct hl_device_idle_busy_ts *ts;
+ ktime_t zero_ktime, curr = ktime_get();
+ u32 overlap_cnt = 0, last_index = hdev->idle_busy_ts_idx;
+ s64 period_us, last_start_us, last_end_us, last_busy_time_us,
+ total_busy_time_us = 0, total_busy_time_ms;
+
+ zero_ktime = ktime_set(0, 0);
+ period_us = period_ms * USEC_PER_MSEC;
+ ts = &hdev->idle_busy_ts_arr[last_index];
+
+ /* check case that device is currently in idle */
+ if (!ktime_compare(ts->busy_to_idle_ts, zero_ktime) &&
+ !ktime_compare(ts->idle_to_busy_ts, zero_ktime)) {
+
+ last_index--;
+ /* Handle case idle_busy_ts_idx was 0 */
+ if (last_index > HL_IDLE_BUSY_TS_ARR_SIZE)
+ last_index = HL_IDLE_BUSY_TS_ARR_SIZE - 1;
+
+ ts = &hdev->idle_busy_ts_arr[last_index];
+ }
+
+ while (overlap_cnt < HL_IDLE_BUSY_TS_ARR_SIZE) {
+ /* Check if we are in last sample case. i.e. if the sample
+ * begun before the sampling period. This could be a real
+ * sample or 0 so need to handle both cases
+ */
+ last_start_us = ktime_to_us(
+ ktime_sub(curr, ts->idle_to_busy_ts));
+
+ if (last_start_us > period_us) {
+
+ /* First check two cases:
+ * 1. If the device is currently busy
+ * 2. If the device was idle during the whole sampling
+ * period
+ */
+
+ if (!ktime_compare(ts->busy_to_idle_ts, zero_ktime)) {
+ /* Check if the device is currently busy */
+ if (ktime_compare(ts->idle_to_busy_ts,
+ zero_ktime))
+ return 100;
+
+ /* We either didn't have any activity or we
+ * reached an entry which is 0. Either way,
+ * exit and return what was accumulated so far
+ */
+ break;
+ }
+
+ /* If sample has finished, check it is relevant */
+ last_end_us = ktime_to_us(
+ ktime_sub(curr, ts->busy_to_idle_ts));
+
+ if (last_end_us > period_us)
+ break;
+
+ /* It is relevant so add it but with adjustment */
+ last_busy_time_us = ktime_to_us(
+ ktime_sub(ts->busy_to_idle_ts,
+ ts->idle_to_busy_ts));
+ total_busy_time_us += last_busy_time_us -
+ (last_start_us - period_us);
+ break;
+ }
+
+ /* Check if the sample is finished or still open */
+ if (ktime_compare(ts->busy_to_idle_ts, zero_ktime))
+ last_busy_time_us = ktime_to_us(
+ ktime_sub(ts->busy_to_idle_ts,
+ ts->idle_to_busy_ts));
+ else
+ last_busy_time_us = ktime_to_us(
+ ktime_sub(curr, ts->idle_to_busy_ts));
+
+ total_busy_time_us += last_busy_time_us;
+
+ last_index--;
+ /* Handle case idle_busy_ts_idx was 0 */
+ if (last_index > HL_IDLE_BUSY_TS_ARR_SIZE)
+ last_index = HL_IDLE_BUSY_TS_ARR_SIZE - 1;
+
+ ts = &hdev->idle_busy_ts_arr[last_index];
+
+ overlap_cnt++;
+ }
+
+ total_busy_time_ms = DIV_ROUND_UP_ULL(total_busy_time_us,
+ USEC_PER_MSEC);
+
+ return DIV_ROUND_UP_ULL(total_busy_time_ms * 100, period_ms);
+}
+
/*
* hl_device_set_frequency - set the frequency of the device
*
* @hdev: pointer to habanalabs device structure
* @freq: the new frequency value
*
- * Change the frequency if needed.
- * We allose to set PLL to low only if there is no user process
- * Returns 0 if no change was done, otherwise returns 1;
+ * Change the frequency if needed. This function has no protection against
+ * concurrency, therefore it is assumed that the calling function has protected
+ * itself against the case of calling this function from multiple threads with
+ * different values
+ *
+ * Returns 0 if no change was done, otherwise returns 1
*/
int hl_device_set_frequency(struct hl_device *hdev, enum hl_pll_frequency freq)
{
- enum hl_pll_frequency old_freq =
- (freq == PLL_HIGH) ? PLL_LOW : PLL_HIGH;
- int ret;
-
- if (hdev->pm_mng_profile == PM_MANUAL)
- return 0;
-
- ret = atomic_cmpxchg(&hdev->curr_pll_profile, old_freq, freq);
- if (ret == freq)
+ if ((hdev->pm_mng_profile == PM_MANUAL) ||
+ (hdev->curr_pll_profile == freq))
return 0;
- /*
- * in case we want to lower frequency, check if device is not
- * opened. We must have a check here to workaround race condition with
- * hl_device_open
- */
- if ((freq == PLL_LOW) && (atomic_read(&hdev->fd_open_cnt) > 0)) {
- atomic_set(&hdev->curr_pll_profile, PLL_HIGH);
- return 0;
- }
-
dev_dbg(hdev->dev, "Changing device frequency to %s\n",
freq == PLL_HIGH ? "high" : "low");
hdev->asic_funcs->set_pll_profile(hdev, freq);
+ hdev->curr_pll_profile = freq;
+
return 1;
}
@@ -449,19 +613,8 @@ int hl_device_set_debug_mode(struct hl_device *hdev, bool enable)
goto out;
}
- mutex_lock(&hdev->fd_open_cnt_lock);
-
- if (atomic_read(&hdev->fd_open_cnt) > 1) {
- dev_err(hdev->dev,
- "Failed to enable debug mode. More then a single user is using the device\n");
- rc = -EPERM;
- goto unlock_fd_open_lock;
- }
-
hdev->in_debug = 1;
-unlock_fd_open_lock:
- mutex_unlock(&hdev->fd_open_cnt_lock);
out:
mutex_unlock(&hdev->debug_lock);
@@ -568,6 +721,7 @@ disable_device:
static void device_kill_open_processes(struct hl_device *hdev)
{
u16 pending_total, pending_cnt;
+ struct hl_fpriv *hpriv;
struct task_struct *task = NULL;
if (hdev->pldm)
@@ -575,32 +729,31 @@ static void device_kill_open_processes(struct hl_device *hdev)
else
pending_total = HL_PENDING_RESET_PER_SEC;
- pending_cnt = pending_total;
-
- /* Flush all processes that are inside hl_open */
- mutex_lock(&hdev->fd_open_cnt_lock);
-
- while ((atomic_read(&hdev->fd_open_cnt)) && (pending_cnt)) {
-
- pending_cnt--;
-
- dev_info(hdev->dev,
- "Can't HARD reset, waiting for user to close FD\n");
+ /* Giving time for user to close FD, and for processes that are inside
+ * hl_device_open to finish
+ */
+ if (!list_empty(&hdev->fpriv_list))
ssleep(1);
- }
- if (atomic_read(&hdev->fd_open_cnt)) {
- task = get_pid_task(hdev->user_ctx->hpriv->taskpid,
- PIDTYPE_PID);
+ mutex_lock(&hdev->fpriv_list_lock);
+
+ /* This section must be protected because we are dereferencing
+ * pointers that are freed if the process exits
+ */
+ list_for_each_entry(hpriv, &hdev->fpriv_list, dev_node) {
+ task = get_pid_task(hpriv->taskpid, PIDTYPE_PID);
if (task) {
- dev_info(hdev->dev, "Killing user processes\n");
+ dev_info(hdev->dev, "Killing user process pid=%d\n",
+ task_pid_nr(task));
send_sig(SIGKILL, task, 1);
- msleep(100);
+ usleep_range(1000, 10000);
put_task_struct(task);
}
}
+ mutex_unlock(&hdev->fpriv_list_lock);
+
/* We killed the open users, but because the driver cleans up after the
* user contexts are closed (e.g. mmu mappings), we need to wait again
* to make sure the cleaning phase is finished before continuing with
@@ -609,19 +762,18 @@ static void device_kill_open_processes(struct hl_device *hdev)
pending_cnt = pending_total;
- while ((atomic_read(&hdev->fd_open_cnt)) && (pending_cnt)) {
+ while ((!list_empty(&hdev->fpriv_list)) && (pending_cnt)) {
+ dev_info(hdev->dev,
+ "Waiting for all unmap operations to finish before hard reset\n");
pending_cnt--;
ssleep(1);
}
- if (atomic_read(&hdev->fd_open_cnt))
+ if (!list_empty(&hdev->fpriv_list))
dev_crit(hdev->dev,
"Going to hard reset with open user contexts\n");
-
- mutex_unlock(&hdev->fd_open_cnt_lock);
-
}
static void device_hard_reset_pending(struct work_struct *work)
@@ -630,8 +782,6 @@ static void device_hard_reset_pending(struct work_struct *work)
container_of(work, struct hl_device_reset_work, reset_work);
struct hl_device *hdev = device_reset_work->hdev;
- device_kill_open_processes(hdev);
-
hl_device_reset(hdev, true, true);
kfree(device_reset_work);
@@ -679,13 +829,16 @@ int hl_device_reset(struct hl_device *hdev, bool hard_reset,
/* This also blocks future CS/VM/JOB completion operations */
hdev->disabled = true;
- /*
- * Flush anyone that is inside the critical section of enqueue
+ /* Flush anyone that is inside the critical section of enqueue
* jobs to the H/W
*/
hdev->asic_funcs->hw_queues_lock(hdev);
hdev->asic_funcs->hw_queues_unlock(hdev);
+ /* Flush anyone that is inside device open */
+ mutex_lock(&hdev->fpriv_list_lock);
+ mutex_unlock(&hdev->fpriv_list_lock);
+
dev_err(hdev->dev, "Going to RESET device!\n");
}
@@ -736,6 +889,13 @@ again:
/* Go over all the queues, release all CS and their jobs */
hl_cs_rollback_all(hdev);
+ /* Kill processes here after CS rollback. This is because the process
+ * can't really exit until all its CSs are done, which is what we
+ * do in cs rollback
+ */
+ if (from_hard_reset_thread)
+ device_kill_open_processes(hdev);
+
/* Release kernel context */
if ((hard_reset) && (hl_ctx_put(hdev->kernel_ctx) == 1))
hdev->kernel_ctx = NULL;
@@ -754,12 +914,24 @@ again:
for (i = 0 ; i < hdev->asic_prop.completion_queues_count ; i++)
hl_cq_reset(hdev, &hdev->completion_queue[i]);
+ hdev->idle_busy_ts_idx = 0;
+ hdev->idle_busy_ts_arr[0].busy_to_idle_ts = ktime_set(0, 0);
+ hdev->idle_busy_ts_arr[0].idle_to_busy_ts = ktime_set(0, 0);
+
+ if (hdev->cs_active_cnt)
+ dev_crit(hdev->dev, "CS active cnt %d is not 0 during reset\n",
+ hdev->cs_active_cnt);
+
+ mutex_lock(&hdev->fpriv_list_lock);
+
/* Make sure the context switch phase will run again */
- if (hdev->user_ctx) {
- atomic_set(&hdev->user_ctx->thread_ctx_switch_token, 1);
- hdev->user_ctx->thread_ctx_switch_wait_token = 0;
+ if (hdev->compute_ctx) {
+ atomic_set(&hdev->compute_ctx->thread_ctx_switch_token, 1);
+ hdev->compute_ctx->thread_ctx_switch_wait_token = 0;
}
+ mutex_unlock(&hdev->fpriv_list_lock);
+
/* Finished tear-down, starting to re-initialize */
if (hard_reset) {
@@ -788,7 +960,7 @@ again:
goto out_err;
}
- hdev->user_ctx = NULL;
+ hdev->compute_ctx = NULL;
rc = hl_ctx_init(hdev, hdev->kernel_ctx, true);
if (rc) {
@@ -849,6 +1021,8 @@ again:
else
hdev->soft_reset_cnt++;
+ dev_warn(hdev->dev, "Successfully finished resetting the device\n");
+
return 0;
out_err:
@@ -883,17 +1057,43 @@ out_err:
int hl_device_init(struct hl_device *hdev, struct class *hclass)
{
int i, rc, cq_ready_cnt;
+ char *name;
+ bool add_cdev_sysfs_on_err = false;
- /* Create device */
- rc = device_setup_cdev(hdev, hclass, hdev->id, &hl_ops);
+ name = kasprintf(GFP_KERNEL, "hl%d", hdev->id / 2);
+ if (!name) {
+ rc = -ENOMEM;
+ goto out_disabled;
+ }
+
+ /* Initialize cdev and device structures */
+ rc = device_init_cdev(hdev, hclass, hdev->id, &hl_ops, name,
+ &hdev->cdev, &hdev->dev);
+
+ kfree(name);
if (rc)
goto out_disabled;
+ name = kasprintf(GFP_KERNEL, "hl_controlD%d", hdev->id / 2);
+ if (!name) {
+ rc = -ENOMEM;
+ goto free_dev;
+ }
+
+ /* Initialize cdev and device structures for control device */
+ rc = device_init_cdev(hdev, hclass, hdev->id_control, &hl_ctrl_ops,
+ name, &hdev->cdev_ctrl, &hdev->dev_ctrl);
+
+ kfree(name);
+
+ if (rc)
+ goto free_dev;
+
/* Initialize ASIC function pointers and perform early init */
rc = device_early_init(hdev);
if (rc)
- goto release_device;
+ goto free_dev_ctrl;
/*
* Start calling ASIC initialization. First S/W then H/W and finally
@@ -965,7 +1165,7 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
goto mmu_fini;
}
- hdev->user_ctx = NULL;
+ hdev->compute_ctx = NULL;
rc = hl_ctx_init(hdev, hdev->kernel_ctx, true);
if (rc) {
@@ -980,12 +1180,6 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
goto release_ctx;
}
- rc = hl_sysfs_init(hdev);
- if (rc) {
- dev_err(hdev->dev, "failed to initialize sysfs\n");
- goto free_cb_pool;
- }
-
hl_debugfs_add_device(hdev);
if (hdev->asic_funcs->get_hw_state(hdev) == HL_DEVICE_HW_STATE_DIRTY) {
@@ -994,6 +1188,12 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
hdev->asic_funcs->hw_fini(hdev, true);
}
+ /*
+ * From this point, in case of an error, add char devices and create
+ * sysfs nodes as part of the error flow, to allow debugging.
+ */
+ add_cdev_sysfs_on_err = true;
+
rc = hdev->asic_funcs->hw_init(hdev);
if (rc) {
dev_err(hdev->dev, "failed to initialize the H/W\n");
@@ -1030,9 +1230,24 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
}
/*
- * hl_hwmon_init must be called after device_late_init, because only
+ * Expose devices and sysfs nodes to user.
+ * From here there is no need to add char devices and create sysfs nodes
+ * in case of an error.
+ */
+ add_cdev_sysfs_on_err = false;
+ rc = device_cdev_sysfs_add(hdev);
+ if (rc) {
+ dev_err(hdev->dev,
+ "Failed to add char devices and sysfs nodes\n");
+ rc = 0;
+ goto out_disabled;
+ }
+
+ /*
+ * hl_hwmon_init() must be called after device_late_init(), because only
* there we get the information from the device about which
- * hwmon-related sensors the device supports
+ * hwmon-related sensors the device supports.
+ * Furthermore, it must be done after adding the device to the system.
*/
rc = hl_hwmon_init(hdev);
if (rc) {
@@ -1048,8 +1263,6 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
return 0;
-free_cb_pool:
- hl_cb_pool_fini(hdev);
release_ctx:
if (hl_ctx_put(hdev->kernel_ctx) != 1)
dev_err(hdev->dev,
@@ -1068,18 +1281,21 @@ sw_fini:
hdev->asic_funcs->sw_fini(hdev);
early_fini:
device_early_fini(hdev);
-release_device:
- device_destroy(hclass, hdev->dev->devt);
- cdev_del(&hdev->cdev);
+free_dev_ctrl:
+ kfree(hdev->dev_ctrl);
+free_dev:
+ kfree(hdev->dev);
out_disabled:
hdev->disabled = true;
+ if (add_cdev_sysfs_on_err)
+ device_cdev_sysfs_add(hdev);
if (hdev->pdev)
dev_err(&hdev->pdev->dev,
"Failed to initialize hl%d. Device is NOT usable !\n",
- hdev->id);
+ hdev->id / 2);
else
pr_err("Failed to initialize hl%d. Device is NOT usable !\n",
- hdev->id);
+ hdev->id / 2);
return rc;
}
@@ -1120,16 +1336,17 @@ void hl_device_fini(struct hl_device *hdev)
/* Mark device as disabled */
hdev->disabled = true;
- /*
- * Flush anyone that is inside the critical section of enqueue
+ /* Flush anyone that is inside the critical section of enqueue
* jobs to the H/W
*/
hdev->asic_funcs->hw_queues_lock(hdev);
hdev->asic_funcs->hw_queues_unlock(hdev);
- hdev->hard_reset_pending = true;
+ /* Flush anyone that is inside device open */
+ mutex_lock(&hdev->fpriv_list_lock);
+ mutex_unlock(&hdev->fpriv_list_lock);
- device_kill_open_processes(hdev);
+ hdev->hard_reset_pending = true;
hl_hwmon_fini(hdev);
@@ -1137,8 +1354,6 @@ void hl_device_fini(struct hl_device *hdev)
hl_debugfs_remove_device(hdev);
- hl_sysfs_fini(hdev);
-
/*
* Halt the engines and disable interrupts so we won't get any more
* completions from H/W and we won't have any accesses from the
@@ -1149,6 +1364,12 @@ void hl_device_fini(struct hl_device *hdev)
/* Go over all the queues, release all CS and their jobs */
hl_cs_rollback_all(hdev);
+ /* Kill processes here after CS rollback. This is because the process
+ * can't really exit until all its CSs are done, which is what we
+ * do in cs rollback
+ */
+ device_kill_open_processes(hdev);
+
hl_cb_pool_fini(hdev);
/* Release kernel context */
@@ -1175,9 +1396,8 @@ void hl_device_fini(struct hl_device *hdev)
device_early_fini(hdev);
- /* Hide device from user */
- device_destroy(hdev->dev->class, hdev->dev->devt);
- cdev_del(&hdev->cdev);
+ /* Hide devices and sysfs nodes from user */
+ device_cdev_sysfs_del(hdev);
pr_info("removed device successfully\n");
}
diff --git a/drivers/misc/habanalabs/goya/goya.c b/drivers/misc/habanalabs/goya/goya.c
index 271c5c8f53b4..6fba14b81f90 100644
--- a/drivers/misc/habanalabs/goya/goya.c
+++ b/drivers/misc/habanalabs/goya/goya.c
@@ -9,6 +9,7 @@
#include "include/hw_ip/mmu/mmu_general.h"
#include "include/hw_ip/mmu/mmu_v1_0.h"
#include "include/goya/asic_reg/goya_masks.h"
+#include "include/goya/goya_reg_map.h"
#include <linux/pci.h>
#include <linux/genalloc.h>
@@ -41,8 +42,8 @@
* PQ, CQ and CP are not secured.
* PQ, CB and the data are on the SRAM/DRAM.
*
- * Since QMAN DMA is secured, KMD is parsing the DMA CB:
- * - KMD checks DMA pointer
+ * Since QMAN DMA is secured, the driver is parsing the DMA CB:
+ * - checks DMA pointer
* - WREG, MSG_PROT are not allowed.
* - MSG_LONG/SHORT are allowed.
*
@@ -55,15 +56,15 @@
* QMAN DMA: PQ, CQ and CP are secured.
* MMU is set to bypass on the Secure props register of the QMAN.
* The reasons we don't enable MMU for PQ, CQ and CP are:
- * - PQ entry is in kernel address space and KMD doesn't map it.
+ * - PQ entry is in kernel address space and the driver doesn't map it.
* - CP writes to MSIX register and to kernel address space (completion
* queue).
*
- * DMA is not secured but because CP is secured, KMD still needs to parse the
- * CB, but doesn't need to check the DMA addresses.
+ * DMA is not secured but because CP is secured, the driver still needs to parse
+ * the CB, but doesn't need to check the DMA addresses.
*
- * For QMAN DMA 0, DMA is also secured because only KMD uses this DMA and KMD
- * doesn't map memory in MMU.
+ * For QMAN DMA 0, DMA is also secured because only the driver uses this DMA and
+ * the driver doesn't map memory in MMU.
*
* QMAN TPC/MME: PQ, CQ and CP aren't secured (no change from MMU disabled mode)
*
@@ -335,18 +336,18 @@ void goya_get_fixed_properties(struct hl_device *hdev)
for (i = 0 ; i < NUMBER_OF_EXT_HW_QUEUES ; i++) {
prop->hw_queues_props[i].type = QUEUE_TYPE_EXT;
- prop->hw_queues_props[i].kmd_only = 0;
+ prop->hw_queues_props[i].driver_only = 0;
}
for (; i < NUMBER_OF_EXT_HW_QUEUES + NUMBER_OF_CPU_HW_QUEUES ; i++) {
prop->hw_queues_props[i].type = QUEUE_TYPE_CPU;
- prop->hw_queues_props[i].kmd_only = 1;
+ prop->hw_queues_props[i].driver_only = 1;
}
for (; i < NUMBER_OF_EXT_HW_QUEUES + NUMBER_OF_CPU_HW_QUEUES +
NUMBER_OF_INT_HW_QUEUES; i++) {
prop->hw_queues_props[i].type = QUEUE_TYPE_INT;
- prop->hw_queues_props[i].kmd_only = 0;
+ prop->hw_queues_props[i].driver_only = 0;
}
for (; i < HL_MAX_QUEUES; i++)
@@ -1006,36 +1007,34 @@ int goya_init_cpu_queues(struct hl_device *hdev)
eq = &hdev->event_queue;
- WREG32(mmPSOC_GLOBAL_CONF_SCRATCHPAD_0,
- lower_32_bits(cpu_pq->bus_address));
- WREG32(mmPSOC_GLOBAL_CONF_SCRATCHPAD_1,
- upper_32_bits(cpu_pq->bus_address));
+ WREG32(mmCPU_PQ_BASE_ADDR_LOW, lower_32_bits(cpu_pq->bus_address));
+ WREG32(mmCPU_PQ_BASE_ADDR_HIGH, upper_32_bits(cpu_pq->bus_address));
- WREG32(mmPSOC_GLOBAL_CONF_SCRATCHPAD_2, lower_32_bits(eq->bus_address));
- WREG32(mmPSOC_GLOBAL_CONF_SCRATCHPAD_3, upper_32_bits(eq->bus_address));
+ WREG32(mmCPU_EQ_BASE_ADDR_LOW, lower_32_bits(eq->bus_address));
+ WREG32(mmCPU_EQ_BASE_ADDR_HIGH, upper_32_bits(eq->bus_address));
- WREG32(mmPSOC_GLOBAL_CONF_SCRATCHPAD_8,
+ WREG32(mmCPU_CQ_BASE_ADDR_LOW,
lower_32_bits(VA_CPU_ACCESSIBLE_MEM_ADDR));
- WREG32(mmPSOC_GLOBAL_CONF_SCRATCHPAD_9,
+ WREG32(mmCPU_CQ_BASE_ADDR_HIGH,
upper_32_bits(VA_CPU_ACCESSIBLE_MEM_ADDR));
- WREG32(mmPSOC_GLOBAL_CONF_SCRATCHPAD_5, HL_QUEUE_SIZE_IN_BYTES);
- WREG32(mmPSOC_GLOBAL_CONF_SCRATCHPAD_4, HL_EQ_SIZE_IN_BYTES);
- WREG32(mmPSOC_GLOBAL_CONF_SCRATCHPAD_10, HL_CPU_ACCESSIBLE_MEM_SIZE);
+ WREG32(mmCPU_PQ_LENGTH, HL_QUEUE_SIZE_IN_BYTES);
+ WREG32(mmCPU_EQ_LENGTH, HL_EQ_SIZE_IN_BYTES);
+ WREG32(mmCPU_CQ_LENGTH, HL_CPU_ACCESSIBLE_MEM_SIZE);
/* Used for EQ CI */
- WREG32(mmPSOC_GLOBAL_CONF_SCRATCHPAD_6, 0);
+ WREG32(mmCPU_EQ_CI, 0);
WREG32(mmCPU_IF_PF_PQ_PI, 0);
- WREG32(mmPSOC_GLOBAL_CONF_SCRATCHPAD_7, PQ_INIT_STATUS_READY_FOR_CP);
+ WREG32(mmCPU_PQ_INIT_STATUS, PQ_INIT_STATUS_READY_FOR_CP);
WREG32(mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR,
GOYA_ASYNC_EVENT_ID_PI_UPDATE);
err = hl_poll_timeout(
hdev,
- mmPSOC_GLOBAL_CONF_SCRATCHPAD_7,
+ mmCPU_PQ_INIT_STATUS,
status,
(status == PQ_INIT_STATUS_READY_FOR_HOST),
1000,
@@ -2063,6 +2062,25 @@ static void goya_disable_msix(struct hl_device *hdev)
goya->hw_cap_initialized &= ~HW_CAP_MSIX;
}
+static void goya_enable_timestamp(struct hl_device *hdev)
+{
+ /* Disable the timestamp counter */
+ WREG32(mmPSOC_TIMESTAMP_BASE - CFG_BASE, 0);
+
+ /* Zero the lower/upper parts of the 64-bit counter */
+ WREG32(mmPSOC_TIMESTAMP_BASE - CFG_BASE + 0xC, 0);
+ WREG32(mmPSOC_TIMESTAMP_BASE - CFG_BASE + 0x8, 0);
+
+ /* Enable the counter */
+ WREG32(mmPSOC_TIMESTAMP_BASE - CFG_BASE, 1);
+}
+
+static void goya_disable_timestamp(struct hl_device *hdev)
+{
+ /* Disable the timestamp counter */
+ WREG32(mmPSOC_TIMESTAMP_BASE - CFG_BASE, 0);
+}
+
static void goya_halt_engines(struct hl_device *hdev, bool hard_reset)
{
u32 wait_timeout_ms, cpu_timeout_ms;
@@ -2103,6 +2121,8 @@ static void goya_halt_engines(struct hl_device *hdev, bool hard_reset)
goya_disable_external_queues(hdev);
goya_disable_internal_queues(hdev);
+ goya_disable_timestamp(hdev);
+
if (hard_reset) {
goya_disable_msix(hdev);
goya_mmu_remove_device_cpu_mappings(hdev);
@@ -2205,12 +2225,12 @@ static void goya_read_device_fw_version(struct hl_device *hdev,
switch (fwc) {
case FW_COMP_UBOOT:
- ver_off = RREG32(mmPSOC_GLOBAL_CONF_SCRATCHPAD_29);
+ ver_off = RREG32(mmUBOOT_VER_OFFSET);
dest = hdev->asic_prop.uboot_ver;
name = "U-Boot";
break;
case FW_COMP_PREBOOT:
- ver_off = RREG32(mmPSOC_GLOBAL_CONF_SCRATCHPAD_28);
+ ver_off = RREG32(mmPREBOOT_VER_OFFSET);
dest = hdev->asic_prop.preboot_ver;
name = "Preboot";
break;
@@ -2469,7 +2489,7 @@ static int goya_hw_init(struct hl_device *hdev)
* we need to reset the chip before doing H/W init. This register is
* cleared by the H/W upon H/W reset
*/
- WREG32(mmPSOC_GLOBAL_CONF_APP_STATUS, HL_DEVICE_HW_STATE_DIRTY);
+ WREG32(mmHW_STATE, HL_DEVICE_HW_STATE_DIRTY);
rc = goya_init_cpu(hdev, GOYA_CPU_TIMEOUT_USEC);
if (rc) {
@@ -2505,6 +2525,8 @@ static int goya_hw_init(struct hl_device *hdev)
goya_init_tpc_qmans(hdev);
+ goya_enable_timestamp(hdev);
+
/* MSI-X must be enabled before CPU queues are initialized */
rc = goya_enable_msix(hdev);
if (rc)
@@ -2831,7 +2853,7 @@ static int goya_send_job_on_qman0(struct hl_device *hdev, struct hl_cs_job *job)
if (!hdev->asic_funcs->is_device_idle(hdev, NULL, NULL)) {
dev_err_ratelimited(hdev->dev,
- "Can't send KMD job on QMAN0 because the device is not idle\n");
+ "Can't send driver job on QMAN0 because the device is not idle\n");
return -EBUSY;
}
@@ -3949,7 +3971,7 @@ void goya_add_end_of_cb_packets(struct hl_device *hdev, u64 kernel_address,
void goya_update_eq_ci(struct hl_device *hdev, u32 val)
{
- WREG32(mmPSOC_GLOBAL_CONF_SCRATCHPAD_6, val);
+ WREG32(mmCPU_EQ_CI, val);
}
void goya_restore_phase_topology(struct hl_device *hdev)
@@ -4447,6 +4469,7 @@ void goya_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entry)
struct goya_device *goya = hdev->asic_specific;
goya->events_stat[event_type]++;
+ goya->events_stat_aggregate[event_type]++;
switch (event_type) {
case GOYA_ASYNC_EVENT_ID_PCIE_IF:
@@ -4528,12 +4551,16 @@ void goya_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entry)
}
}
-void *goya_get_events_stat(struct hl_device *hdev, u32 *size)
+void *goya_get_events_stat(struct hl_device *hdev, bool aggregate, u32 *size)
{
struct goya_device *goya = hdev->asic_specific;
- *size = (u32) sizeof(goya->events_stat);
+ if (aggregate) {
+ *size = (u32) sizeof(goya->events_stat_aggregate);
+ return goya->events_stat_aggregate;
+ }
+ *size = (u32) sizeof(goya->events_stat);
return goya->events_stat;
}
@@ -4934,6 +4961,10 @@ int goya_armcp_info_get(struct hl_device *hdev)
prop->dram_end_address = prop->dram_base_address + dram_size;
}
+ if (!strlen(prop->armcp_info.card_name))
+ strncpy(prop->armcp_info.card_name, GOYA_DEFAULT_CARD_NAME,
+ CARD_NAME_MAX_LEN);
+
return 0;
}
@@ -5047,7 +5078,7 @@ static int goya_get_eeprom_data(struct hl_device *hdev, void *data,
static enum hl_device_hw_state goya_get_hw_state(struct hl_device *hdev)
{
- return RREG32(mmPSOC_GLOBAL_CONF_APP_STATUS);
+ return RREG32(mmHW_STATE);
}
static const struct hl_asic_funcs goya_funcs = {
diff --git a/drivers/misc/habanalabs/goya/goyaP.h b/drivers/misc/habanalabs/goya/goyaP.h
index d7f48c9c41cd..89b6574f8e4f 100644
--- a/drivers/misc/habanalabs/goya/goyaP.h
+++ b/drivers/misc/habanalabs/goya/goyaP.h
@@ -55,6 +55,8 @@
#define DRAM_PHYS_DEFAULT_SIZE 0x100000000ull /* 4GB */
+#define GOYA_DEFAULT_CARD_NAME "HL1000"
+
/* DRAM Memory Map */
#define CPU_FW_IMAGE_SIZE 0x10000000 /* 256MB */
@@ -68,19 +70,19 @@
MMU_PAGE_TABLES_SIZE)
#define MMU_CACHE_MNG_ADDR (MMU_DRAM_DEFAULT_PAGE_ADDR + \
MMU_DRAM_DEFAULT_PAGE_SIZE)
-#define DRAM_KMD_END_ADDR (MMU_CACHE_MNG_ADDR + \
+#define DRAM_DRIVER_END_ADDR (MMU_CACHE_MNG_ADDR + \
MMU_CACHE_MNG_SIZE)
#define DRAM_BASE_ADDR_USER 0x20000000
-#if (DRAM_KMD_END_ADDR > DRAM_BASE_ADDR_USER)
-#error "KMD must reserve no more than 512MB"
+#if (DRAM_DRIVER_END_ADDR > DRAM_BASE_ADDR_USER)
+#error "Driver must reserve no more than 512MB"
#endif
/*
- * SRAM Memory Map for KMD
+ * SRAM Memory Map for Driver
*
- * KMD occupies KMD_SRAM_SIZE bytes from the start of SRAM. It is used for
+ * Driver occupies DRIVER_SRAM_SIZE bytes from the start of SRAM. It is used for
* MME/TPC QMANs
*
*/
@@ -106,10 +108,10 @@
#define TPC7_QMAN_BASE_OFFSET (TPC6_QMAN_BASE_OFFSET + \
(TPC_QMAN_LENGTH * QMAN_PQ_ENTRY_SIZE))
-#define SRAM_KMD_RES_OFFSET (TPC7_QMAN_BASE_OFFSET + \
+#define SRAM_DRIVER_RES_OFFSET (TPC7_QMAN_BASE_OFFSET + \
(TPC_QMAN_LENGTH * QMAN_PQ_ENTRY_SIZE))
-#if (SRAM_KMD_RES_OFFSET >= GOYA_KMD_SRAM_RESERVED_SIZE_FROM_START)
+#if (SRAM_DRIVER_RES_OFFSET >= GOYA_KMD_SRAM_RESERVED_SIZE_FROM_START)
#error "MME/TPC QMANs SRAM space exceeds limit"
#endif
@@ -162,6 +164,7 @@ struct goya_device {
u64 ddr_bar_cur_addr;
u32 events_stat[GOYA_ASYNC_EVENT_ID_SIZE];
+ u32 events_stat_aggregate[GOYA_ASYNC_EVENT_ID_SIZE];
u32 hw_cap_initialized;
u8 device_cpu_mmu_mappings_done;
};
@@ -215,7 +218,7 @@ int goya_suspend(struct hl_device *hdev);
int goya_resume(struct hl_device *hdev);
void goya_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entry);
-void *goya_get_events_stat(struct hl_device *hdev, u32 *size);
+void *goya_get_events_stat(struct hl_device *hdev, bool aggregate, u32 *size);
void goya_add_end_of_cb_packets(struct hl_device *hdev, u64 kernel_address,
u32 len, u64 cq_addr, u32 cq_val, u32 msix_vec);
diff --git a/drivers/misc/habanalabs/goya/goya_coresight.c b/drivers/misc/habanalabs/goya/goya_coresight.c
index d7ec7ad84cc6..b4d406af1bed 100644
--- a/drivers/misc/habanalabs/goya/goya_coresight.c
+++ b/drivers/misc/habanalabs/goya/goya_coresight.c
@@ -15,6 +15,10 @@
#define GOYA_PLDM_CORESIGHT_TIMEOUT_USEC (CORESIGHT_TIMEOUT_USEC * 100)
+#define SPMU_SECTION_SIZE DMA_CH_0_CS_SPMU_MAX_OFFSET
+#define SPMU_EVENT_TYPES_OFFSET 0x400
+#define SPMU_MAX_COUNTERS 6
+
static u64 debug_stm_regs[GOYA_STM_LAST + 1] = {
[GOYA_STM_CPU] = mmCPU_STM_BASE,
[GOYA_STM_DMA_CH_0_CS] = mmDMA_CH_0_CS_STM_BASE,
@@ -226,9 +230,16 @@ static int goya_config_stm(struct hl_device *hdev,
struct hl_debug_params *params)
{
struct hl_debug_params_stm *input;
- u64 base_reg = debug_stm_regs[params->reg_idx] - CFG_BASE;
+ u64 base_reg;
int rc;
+ if (params->reg_idx >= ARRAY_SIZE(debug_stm_regs)) {
+ dev_err(hdev->dev, "Invalid register index in STM\n");
+ return -EINVAL;
+ }
+
+ base_reg = debug_stm_regs[params->reg_idx] - CFG_BASE;
+
WREG32(base_reg + 0xFB0, CORESIGHT_UNLOCK);
if (params->enable) {
@@ -288,10 +299,17 @@ static int goya_config_etf(struct hl_device *hdev,
struct hl_debug_params *params)
{
struct hl_debug_params_etf *input;
- u64 base_reg = debug_etf_regs[params->reg_idx] - CFG_BASE;
+ u64 base_reg;
u32 val;
int rc;
+ if (params->reg_idx >= ARRAY_SIZE(debug_etf_regs)) {
+ dev_err(hdev->dev, "Invalid register index in ETF\n");
+ return -EINVAL;
+ }
+
+ base_reg = debug_etf_regs[params->reg_idx] - CFG_BASE;
+
WREG32(base_reg + 0xFB0, CORESIGHT_UNLOCK);
val = RREG32(base_reg + 0x304);
@@ -445,11 +463,18 @@ static int goya_config_etr(struct hl_device *hdev,
static int goya_config_funnel(struct hl_device *hdev,
struct hl_debug_params *params)
{
- WREG32(debug_funnel_regs[params->reg_idx] - CFG_BASE + 0xFB0,
- CORESIGHT_UNLOCK);
+ u64 base_reg;
+
+ if (params->reg_idx >= ARRAY_SIZE(debug_funnel_regs)) {
+ dev_err(hdev->dev, "Invalid register index in FUNNEL\n");
+ return -EINVAL;
+ }
+
+ base_reg = debug_funnel_regs[params->reg_idx] - CFG_BASE;
+
+ WREG32(base_reg + 0xFB0, CORESIGHT_UNLOCK);
- WREG32(debug_funnel_regs[params->reg_idx] - CFG_BASE,
- params->enable ? 0x33F : 0);
+ WREG32(base_reg, params->enable ? 0x33F : 0);
return 0;
}
@@ -458,9 +483,16 @@ static int goya_config_bmon(struct hl_device *hdev,
struct hl_debug_params *params)
{
struct hl_debug_params_bmon *input;
- u64 base_reg = debug_bmon_regs[params->reg_idx] - CFG_BASE;
+ u64 base_reg;
u32 pcie_base = 0;
+ if (params->reg_idx >= ARRAY_SIZE(debug_bmon_regs)) {
+ dev_err(hdev->dev, "Invalid register index in BMON\n");
+ return -EINVAL;
+ }
+
+ base_reg = debug_bmon_regs[params->reg_idx] - CFG_BASE;
+
WREG32(base_reg + 0x104, 1);
if (params->enable) {
@@ -522,7 +554,7 @@ static int goya_config_bmon(struct hl_device *hdev,
static int goya_config_spmu(struct hl_device *hdev,
struct hl_debug_params *params)
{
- u64 base_reg = debug_spmu_regs[params->reg_idx] - CFG_BASE;
+ u64 base_reg;
struct hl_debug_params_spmu *input = params->input;
u64 *output;
u32 output_arr_len;
@@ -531,6 +563,13 @@ static int goya_config_spmu(struct hl_device *hdev,
u32 cycle_cnt_idx;
int i;
+ if (params->reg_idx >= ARRAY_SIZE(debug_spmu_regs)) {
+ dev_err(hdev->dev, "Invalid register index in SPMU\n");
+ return -EINVAL;
+ }
+
+ base_reg = debug_spmu_regs[params->reg_idx] - CFG_BASE;
+
if (params->enable) {
input = params->input;
@@ -539,7 +578,13 @@ static int goya_config_spmu(struct hl_device *hdev,
if (input->event_types_num < 3) {
dev_err(hdev->dev,
- "not enough values for SPMU enable\n");
+ "not enough event types values for SPMU enable\n");
+ return -EINVAL;
+ }
+
+ if (input->event_types_num > SPMU_MAX_COUNTERS) {
+ dev_err(hdev->dev,
+ "too many event types values for SPMU enable\n");
return -EINVAL;
}
@@ -547,7 +592,8 @@ static int goya_config_spmu(struct hl_device *hdev,
WREG32(base_reg + 0xE04, 0x41013040);
for (i = 0 ; i < input->event_types_num ; i++)
- WREG32(base_reg + 0x400 + i * 4, input->event_types[i]);
+ WREG32(base_reg + SPMU_EVENT_TYPES_OFFSET + i * 4,
+ input->event_types[i]);
WREG32(base_reg + 0xE04, 0x41013041);
WREG32(base_reg + 0xC00, 0x8000003F);
@@ -567,6 +613,12 @@ static int goya_config_spmu(struct hl_device *hdev,
return -EINVAL;
}
+ if (events_num > SPMU_MAX_COUNTERS) {
+ dev_err(hdev->dev,
+ "too many events values for SPMU disable\n");
+ return -EINVAL;
+ }
+
WREG32(base_reg + 0xE04, 0x41013040);
for (i = 0 ; i < events_num ; i++)
@@ -584,24 +636,11 @@ static int goya_config_spmu(struct hl_device *hdev,
return 0;
}
-static int goya_config_timestamp(struct hl_device *hdev,
- struct hl_debug_params *params)
-{
- WREG32(mmPSOC_TIMESTAMP_BASE - CFG_BASE, 0);
- if (params->enable) {
- WREG32(mmPSOC_TIMESTAMP_BASE - CFG_BASE + 0xC, 0);
- WREG32(mmPSOC_TIMESTAMP_BASE - CFG_BASE + 0x8, 0);
- WREG32(mmPSOC_TIMESTAMP_BASE - CFG_BASE, 1);
- }
-
- return 0;
-}
-
int goya_debug_coresight(struct hl_device *hdev, void *data)
{
struct hl_debug_params *params = data;
u32 val;
- int rc;
+ int rc = 0;
switch (params->op) {
case HL_DEBUG_OP_STM:
@@ -623,7 +662,7 @@ int goya_debug_coresight(struct hl_device *hdev, void *data)
rc = goya_config_spmu(hdev, params);
break;
case HL_DEBUG_OP_TIMESTAMP:
- rc = goya_config_timestamp(hdev, params);
+ /* Do nothing as this opcode is deprecated */
break;
default:
diff --git a/drivers/misc/habanalabs/goya/goya_hwmgr.c b/drivers/misc/habanalabs/goya/goya_hwmgr.c
index 088692c852b6..a2a700c3d597 100644
--- a/drivers/misc/habanalabs/goya/goya_hwmgr.c
+++ b/drivers/misc/habanalabs/goya/goya_hwmgr.c
@@ -230,18 +230,127 @@ static ssize_t ic_clk_curr_show(struct device *dev,
return sprintf(buf, "%lu\n", value);
}
+static ssize_t pm_mng_profile_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct hl_device *hdev = dev_get_drvdata(dev);
+
+ if (hl_device_disabled_or_in_reset(hdev))
+ return -ENODEV;
+
+ return sprintf(buf, "%s\n",
+ (hdev->pm_mng_profile == PM_AUTO) ? "auto" :
+ (hdev->pm_mng_profile == PM_MANUAL) ? "manual" :
+ "unknown");
+}
+
+static ssize_t pm_mng_profile_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct hl_device *hdev = dev_get_drvdata(dev);
+
+ if (hl_device_disabled_or_in_reset(hdev)) {
+ count = -ENODEV;
+ goto out;
+ }
+
+ mutex_lock(&hdev->fpriv_list_lock);
+
+ if (hdev->compute_ctx) {
+ dev_err(hdev->dev,
+ "Can't change PM profile while compute context is opened on the device\n");
+ count = -EPERM;
+ goto unlock_mutex;
+ }
+
+ if (strncmp("auto", buf, strlen("auto")) == 0) {
+ /* Make sure we are in LOW PLL when changing modes */
+ if (hdev->pm_mng_profile == PM_MANUAL) {
+ hdev->curr_pll_profile = PLL_HIGH;
+ hl_device_set_frequency(hdev, PLL_LOW);
+ hdev->pm_mng_profile = PM_AUTO;
+ }
+ } else if (strncmp("manual", buf, strlen("manual")) == 0) {
+ if (hdev->pm_mng_profile == PM_AUTO) {
+ /* Must release the lock because the work thread also
+ * takes this lock. But before we release it, set
+ * the mode to manual so nothing will change if a user
+ * suddenly opens the device
+ */
+ hdev->pm_mng_profile = PM_MANUAL;
+
+ mutex_unlock(&hdev->fpriv_list_lock);
+
+ /* Flush the current work so we can return to the user
+ * knowing that he is the only one changing frequencies
+ */
+ flush_delayed_work(&hdev->work_freq);
+
+ return count;
+ }
+ } else {
+ dev_err(hdev->dev, "value should be auto or manual\n");
+ count = -EINVAL;
+ }
+
+unlock_mutex:
+ mutex_unlock(&hdev->fpriv_list_lock);
+out:
+ return count;
+}
+
+static ssize_t high_pll_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct hl_device *hdev = dev_get_drvdata(dev);
+
+ if (hl_device_disabled_or_in_reset(hdev))
+ return -ENODEV;
+
+ return sprintf(buf, "%u\n", hdev->high_pll);
+}
+
+static ssize_t high_pll_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct hl_device *hdev = dev_get_drvdata(dev);
+ long value;
+ int rc;
+
+ if (hl_device_disabled_or_in_reset(hdev)) {
+ count = -ENODEV;
+ goto out;
+ }
+
+ rc = kstrtoul(buf, 0, &value);
+
+ if (rc) {
+ count = -EINVAL;
+ goto out;
+ }
+
+ hdev->high_pll = value;
+
+out:
+ return count;
+}
+
+static DEVICE_ATTR_RW(high_pll);
static DEVICE_ATTR_RW(ic_clk);
static DEVICE_ATTR_RO(ic_clk_curr);
static DEVICE_ATTR_RW(mme_clk);
static DEVICE_ATTR_RO(mme_clk_curr);
+static DEVICE_ATTR_RW(pm_mng_profile);
static DEVICE_ATTR_RW(tpc_clk);
static DEVICE_ATTR_RO(tpc_clk_curr);
static struct attribute *goya_dev_attrs[] = {
+ &dev_attr_high_pll.attr,
&dev_attr_ic_clk.attr,
&dev_attr_ic_clk_curr.attr,
&dev_attr_mme_clk.attr,
&dev_attr_mme_clk_curr.attr,
+ &dev_attr_pm_mng_profile.attr,
&dev_attr_tpc_clk.attr,
&dev_attr_tpc_clk_curr.attr,
NULL,
diff --git a/drivers/misc/habanalabs/habanalabs.h b/drivers/misc/habanalabs/habanalabs.h
index ce83adafcf2d..75862be53c60 100644
--- a/drivers/misc/habanalabs/habanalabs.h
+++ b/drivers/misc/habanalabs/habanalabs.h
@@ -36,6 +36,8 @@
#define HL_PCI_ELBI_TIMEOUT_MSEC 10 /* 10ms */
+#define HL_SIM_MAX_TIMEOUT_US 10000000 /* 10s */
+
#define HL_MAX_QUEUES 128
#define HL_MAX_JOBS_PER_CS 64
@@ -43,6 +45,8 @@
/* MUST BE POWER OF 2 and larger than 1 */
#define HL_MAX_PENDING_CS 64
+#define HL_IDLE_BUSY_TS_ARR_SIZE 4096
+
/* Memory */
#define MEM_HASH_TABLE_BITS 7 /* 1 << 7 buckets */
@@ -92,12 +96,12 @@ enum hl_queue_type {
/**
* struct hw_queue_properties - queue information.
* @type: queue type.
- * @kmd_only: true if only KMD is allowed to send a job to this queue, false
- * otherwise.
+ * @driver_only: true if only the driver is allowed to send a job to this queue,
+ * false otherwise.
*/
struct hw_queue_properties {
enum hl_queue_type type;
- u8 kmd_only;
+ u8 driver_only;
};
/**
@@ -320,7 +324,7 @@ struct hl_cs_job;
#define HL_EQ_LENGTH 64
#define HL_EQ_SIZE_IN_BYTES (HL_EQ_LENGTH * HL_EQ_ENTRY_SIZE)
-/* KMD <-> ArmCP shared memory size */
+/* Host <-> ArmCP shared memory size */
#define HL_CPU_ACCESSIBLE_MEM_SIZE SZ_2M
/**
@@ -401,7 +405,7 @@ struct hl_cs_parser;
/**
* enum hl_pm_mng_profile - power management profile.
- * @PM_AUTO: internal clock is set by KMD.
+ * @PM_AUTO: internal clock is set by the Linux driver.
* @PM_MANUAL: internal clock is set by the user.
* @PM_LAST: last power management type.
*/
@@ -554,7 +558,8 @@ struct hl_asic_funcs {
struct hl_eq_entry *eq_entry);
void (*set_pll_profile)(struct hl_device *hdev,
enum hl_pll_frequency freq);
- void* (*get_events_stat)(struct hl_device *hdev, u32 *size);
+ void* (*get_events_stat)(struct hl_device *hdev, bool aggregate,
+ u32 *size);
u64 (*read_pte)(struct hl_device *hdev, u64 addr);
void (*write_pte)(struct hl_device *hdev, u64 addr, u64 val);
void (*mmu_invalidate_cache)(struct hl_device *hdev, bool is_hard);
@@ -608,7 +613,7 @@ struct hl_va_range {
* descriptor (hl_vm_phys_pg_list or hl_userptr).
* @mmu_phys_hash: holds a mapping from physical address to pgt_info structure.
* @mmu_shadow_hash: holds a mapping from shadow address to pgt_info structure.
- * @hpriv: pointer to the private (KMD) data of the process (fd).
+ * @hpriv: pointer to the private (Kernel Driver) data of the process (fd).
* @hdev: pointer to the device structure.
* @refcount: reference counter for the context. Context is released only when
* this hits 0l. It is incremented on CS and CS_WAIT.
@@ -634,6 +639,7 @@ struct hl_va_range {
* execution phase before the context switch phase
* has finished.
* @asid: context's unique address space ID in the device's MMU.
+ * @handle: context's opaque handle for user
*/
struct hl_ctx {
DECLARE_HASHTABLE(mem_hash, MEM_HASH_TABLE_BITS);
@@ -655,6 +661,7 @@ struct hl_ctx {
atomic_t thread_ctx_switch_token;
u32 thread_ctx_switch_wait_token;
u32 asid;
+ u32 handle;
};
/**
@@ -906,23 +913,27 @@ struct hl_debug_params {
* @hdev: habanalabs device structure.
* @filp: pointer to the given file structure.
* @taskpid: current process ID.
- * @ctx: current executing context.
+ * @ctx: current executing context. TODO: remove for multiple ctx per process
* @ctx_mgr: context manager to handle multiple context for this FD.
* @cb_mgr: command buffer manager to handle multiple buffers for this FD.
* @debugfs_list: list of relevant ASIC debugfs.
+ * @dev_node: node in the device list of file private data
* @refcount: number of related contexts.
* @restore_phase_mutex: lock for context switch and restore phase.
+ * @is_control: true for control device, false otherwise
*/
struct hl_fpriv {
struct hl_device *hdev;
struct file *filp;
struct pid *taskpid;
- struct hl_ctx *ctx; /* TODO: remove for multiple ctx */
+ struct hl_ctx *ctx;
struct hl_ctx_mgr ctx_mgr;
struct hl_cb_mgr cb_mgr;
struct list_head debugfs_list;
+ struct list_head dev_node;
struct kref refcount;
struct mutex restore_phase_mutex;
+ u8 is_control;
};
@@ -1009,7 +1020,7 @@ struct hl_dbg_device_entry {
*/
/* Theoretical limit only. A single host can only contain up to 4 or 8 PCIe
- * x16 cards. In extereme cases, there are hosts that can accommodate 16 cards
+ * x16 cards. In extreme cases, there are hosts that can accommodate 16 cards.
*/
#define HL_MAX_MINORS 256
@@ -1041,14 +1052,18 @@ void hl_wreg(struct hl_device *hdev, u32 reg, u32 val);
WREG32(mm##reg, (RREG32(mm##reg) & ~REG_FIELD_MASK(reg, field)) | \
(val) << REG_FIELD_SHIFT(reg, field))
+/* Timeout should be longer when working with simulator but cap the
+ * increased timeout to some maximum
+ */
#define hl_poll_timeout(hdev, addr, val, cond, sleep_us, timeout_us) \
({ \
ktime_t __timeout; \
- /* timeout should be longer when working with simulator */ \
if (hdev->pdev) \
__timeout = ktime_add_us(ktime_get(), timeout_us); \
else \
- __timeout = ktime_add_us(ktime_get(), (timeout_us * 10)); \
+ __timeout = ktime_add_us(ktime_get(),\
+ min((u64)(timeout_us * 10), \
+ (u64) HL_SIM_MAX_TIMEOUT_US)); \
might_sleep_if(sleep_us); \
for (;;) { \
(val) = RREG32(addr); \
@@ -1080,24 +1095,25 @@ void hl_wreg(struct hl_device *hdev, u32 reg, u32 val);
mem_written_by_device) \
({ \
ktime_t __timeout; \
- /* timeout should be longer when working with simulator */ \
if (hdev->pdev) \
__timeout = ktime_add_us(ktime_get(), timeout_us); \
else \
- __timeout = ktime_add_us(ktime_get(), (timeout_us * 10)); \
+ __timeout = ktime_add_us(ktime_get(),\
+ min((u64)(timeout_us * 10), \
+ (u64) HL_SIM_MAX_TIMEOUT_US)); \
might_sleep_if(sleep_us); \
for (;;) { \
/* Verify we read updates done by other cores or by device */ \
mb(); \
(val) = *((u32 *) (uintptr_t) (addr)); \
if (mem_written_by_device) \
- (val) = le32_to_cpu(val); \
+ (val) = le32_to_cpu(*(__le32 *) &(val)); \
if (cond) \
break; \
if (timeout_us && ktime_compare(ktime_get(), __timeout) > 0) { \
(val) = *((u32 *) (uintptr_t) (addr)); \
if (mem_written_by_device) \
- (val) = le32_to_cpu(val); \
+ (val) = le32_to_cpu(*(__le32 *) &(val)); \
break; \
} \
if (sleep_us) \
@@ -1110,11 +1126,12 @@ void hl_wreg(struct hl_device *hdev, u32 reg, u32 val);
timeout_us) \
({ \
ktime_t __timeout; \
- /* timeout should be longer when working with simulator */ \
if (hdev->pdev) \
__timeout = ktime_add_us(ktime_get(), timeout_us); \
else \
- __timeout = ktime_add_us(ktime_get(), (timeout_us * 10)); \
+ __timeout = ktime_add_us(ktime_get(),\
+ min((u64)(timeout_us * 10), \
+ (u64) HL_SIM_MAX_TIMEOUT_US)); \
might_sleep_if(sleep_us); \
for (;;) { \
(val) = readl(addr); \
@@ -1143,12 +1160,24 @@ struct hl_device_reset_work {
};
/**
+ * struct hl_device_idle_busy_ts - used for calculating device utilization rate.
+ * @idle_to_busy_ts: timestamp where device changed from idle to busy.
+ * @busy_to_idle_ts: timestamp where device changed from busy to idle.
+ */
+struct hl_device_idle_busy_ts {
+ ktime_t idle_to_busy_ts;
+ ktime_t busy_to_idle_ts;
+};
+
+/**
* struct hl_device - habanalabs device structure.
* @pdev: pointer to PCI device, can be NULL in case of simulator device.
* @pcie_bar: array of available PCIe bars.
* @rmmio: configuration area address on SRAM.
* @cdev: related char device.
- * @dev: realted kernel basic device structure.
+ * @cdev_ctrl: char device for control operations only (INFO IOCTL)
+ * @dev: related kernel basic device structure.
+ * @dev_ctrl: related kernel device structure for the control device
* @work_freq: delayed work to lower device frequency if possible.
* @work_heartbeat: delayed work for ArmCP is-alive check.
* @asic_name: ASIC specific nmae.
@@ -1156,25 +1185,19 @@ struct hl_device_reset_work {
* @completion_queue: array of hl_cq.
* @cq_wq: work queue of completion queues for executing work in process context
* @eq_wq: work queue of event queue for executing work in process context.
- * @kernel_ctx: KMD context structure.
+ * @kernel_ctx: Kernel driver context structure.
* @kernel_queues: array of hl_hw_queue.
* @hw_queues_mirror_list: CS mirror list for TDR.
* @hw_queues_mirror_lock: protects hw_queues_mirror_list.
* @kernel_cb_mgr: command buffer manager for creating/destroying/handling CGs.
* @event_queue: event queue for IRQ from ArmCP.
* @dma_pool: DMA pool for small allocations.
- * @cpu_accessible_dma_mem: KMD <-> ArmCP shared memory CPU address.
- * @cpu_accessible_dma_address: KMD <-> ArmCP shared memory DMA address.
- * @cpu_accessible_dma_pool: KMD <-> ArmCP shared memory pool.
+ * @cpu_accessible_dma_mem: Host <-> ArmCP shared memory CPU address.
+ * @cpu_accessible_dma_address: Host <-> ArmCP shared memory DMA address.
+ * @cpu_accessible_dma_pool: Host <-> ArmCP shared memory pool.
* @asid_bitmap: holds used/available ASIDs.
* @asid_mutex: protects asid_bitmap.
- * @fd_open_cnt_lock: lock for updating fd_open_cnt in hl_device_open. Although
- * fd_open_cnt is atomic, we need this lock to serialize
- * the open function because the driver currently supports
- * only a single process at a time. In addition, we need a
- * lock here so we can flush user processes which are opening
- * the device while we are trying to hard reset it
- * @send_cpu_message_lock: enforces only one message in KMD <-> ArmCP queue.
+ * @send_cpu_message_lock: enforces only one message in Host <-> ArmCP queue.
* @debug_lock: protects critical section of setting debug mode for device
* @asic_prop: ASIC specific immutable properties.
* @asic_funcs: ASIC specific functions.
@@ -1189,22 +1212,28 @@ struct hl_device_reset_work {
* @hl_debugfs: device's debugfs manager.
* @cb_pool: list of preallocated CBs.
* @cb_pool_lock: protects the CB pool.
- * @user_ctx: current user context executing.
+ * @fpriv_list: list of file private data structures. Each structure is created
+ * when a user opens the device
+ * @fpriv_list_lock: protects the fpriv_list
+ * @compute_ctx: current compute context executing.
+ * @idle_busy_ts_arr: array to hold time stamps of transitions from idle to busy
+ * and vice-versa
* @dram_used_mem: current DRAM memory consumption.
* @timeout_jiffies: device CS timeout value.
* @max_power: the max power of the device, as configured by the sysadmin. This
- * value is saved so in case of hard-reset, KMD will restore this
- * value and update the F/W after the re-initialization
+ * value is saved so in case of hard-reset, the driver will restore
+ * this value and update the F/W after the re-initialization
* @in_reset: is device in reset flow.
* @curr_pll_profile: current PLL profile.
- * @fd_open_cnt: number of open user processes.
* @cs_active_cnt: number of active command submissions on this device (active
* means already in H/W queues)
- * @major: habanalabs KMD major.
+ * @major: habanalabs kernel driver major.
* @high_pll: high PLL profile frequency.
- * @soft_reset_cnt: number of soft reset since KMD loading.
- * @hard_reset_cnt: number of hard reset since KMD loading.
+ * @soft_reset_cnt: number of soft reset since the driver was loaded.
+ * @hard_reset_cnt: number of hard reset since the driver was loaded.
+ * @idle_busy_ts_idx: index of current entry in idle_busy_ts_arr
* @id: device minor.
+ * @id_control: minor of the control device
* @disabled: is device disabled.
* @late_init_done: is late init stage was done during initialization.
* @hwmon_initialized: is H/W monitor sensors was initialized.
@@ -1218,15 +1247,18 @@ struct hl_device_reset_work {
* @mmu_enable: is MMU enabled.
* @device_cpu_disabled: is the device CPU disabled (due to timeouts)
* @dma_mask: the dma mask that was set for this device
- * @in_debug: is device under debug. This, together with fd_open_cnt, enforces
+ * @in_debug: is device under debug. This, together with fpriv_list, enforces
* that only a single user is configuring the debug infrastructure.
+ * @cdev_sysfs_created: were char devices and sysfs nodes created.
*/
struct hl_device {
struct pci_dev *pdev;
void __iomem *pcie_bar[6];
void __iomem *rmmio;
struct cdev cdev;
+ struct cdev cdev_ctrl;
struct device *dev;
+ struct device *dev_ctrl;
struct delayed_work work_freq;
struct delayed_work work_heartbeat;
char asic_name[16];
@@ -1246,8 +1278,6 @@ struct hl_device {
struct gen_pool *cpu_accessible_dma_pool;
unsigned long *asid_bitmap;
struct mutex asid_mutex;
- /* TODO: remove fd_open_cnt_lock for multiple process support */
- struct mutex fd_open_cnt_lock;
struct mutex send_cpu_message_lock;
struct mutex debug_lock;
struct asic_fixed_properties asic_prop;
@@ -1266,21 +1296,26 @@ struct hl_device {
struct list_head cb_pool;
spinlock_t cb_pool_lock;
- /* TODO: remove user_ctx for multiple process support */
- struct hl_ctx *user_ctx;
+ struct list_head fpriv_list;
+ struct mutex fpriv_list_lock;
+
+ struct hl_ctx *compute_ctx;
+
+ struct hl_device_idle_busy_ts *idle_busy_ts_arr;
atomic64_t dram_used_mem;
u64 timeout_jiffies;
u64 max_power;
atomic_t in_reset;
- atomic_t curr_pll_profile;
- atomic_t fd_open_cnt;
- atomic_t cs_active_cnt;
+ enum hl_pll_frequency curr_pll_profile;
+ int cs_active_cnt;
u32 major;
u32 high_pll;
u32 soft_reset_cnt;
u32 hard_reset_cnt;
+ u32 idle_busy_ts_idx;
u16 id;
+ u16 id_control;
u8 disabled;
u8 late_init_done;
u8 hwmon_initialized;
@@ -1293,6 +1328,7 @@ struct hl_device {
u8 device_cpu_disabled;
u8 dma_mask;
u8 in_debug;
+ u8 cdev_sysfs_created;
/* Parameters for bring-up */
u8 mmu_enable;
@@ -1386,6 +1422,7 @@ static inline bool hl_mem_area_crosses_range(u64 address, u32 size,
}
int hl_device_open(struct inode *inode, struct file *filp);
+int hl_device_open_ctrl(struct inode *inode, struct file *filp);
bool hl_device_disabled_or_in_reset(struct hl_device *hdev);
enum hl_device_status hl_device_status(struct hl_device *hdev);
int hl_device_set_debug_mode(struct hl_device *hdev, bool enable);
@@ -1439,6 +1476,7 @@ int hl_device_reset(struct hl_device *hdev, bool hard_reset,
void hl_hpriv_get(struct hl_fpriv *hpriv);
void hl_hpriv_put(struct hl_fpriv *hpriv);
int hl_device_set_frequency(struct hl_device *hdev, enum hl_pll_frequency freq);
+uint32_t hl_device_utilization(struct hl_device *hdev, uint32_t period_ms);
int hl_build_hwmon_channel_info(struct hl_device *hdev,
struct armcp_sensor *sensors_arr);
@@ -1625,6 +1663,7 @@ static inline void hl_debugfs_remove_ctx_mem_hash(struct hl_device *hdev,
/* IOCTLs */
long hl_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
+long hl_ioctl_control(struct file *filep, unsigned int cmd, unsigned long arg);
int hl_cb_ioctl(struct hl_fpriv *hpriv, void *data);
int hl_cs_ioctl(struct hl_fpriv *hpriv, void *data);
int hl_cs_wait_ioctl(struct hl_fpriv *hpriv, void *data);
diff --git a/drivers/misc/habanalabs/habanalabs_drv.c b/drivers/misc/habanalabs/habanalabs_drv.c
index 6f6dbe93f1df..8c342fb499ca 100644
--- a/drivers/misc/habanalabs/habanalabs_drv.c
+++ b/drivers/misc/habanalabs/habanalabs_drv.c
@@ -95,80 +95,127 @@ int hl_device_open(struct inode *inode, struct file *filp)
return -ENXIO;
}
- mutex_lock(&hdev->fd_open_cnt_lock);
+ hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL);
+ if (!hpriv)
+ return -ENOMEM;
+
+ hpriv->hdev = hdev;
+ filp->private_data = hpriv;
+ hpriv->filp = filp;
+ mutex_init(&hpriv->restore_phase_mutex);
+ kref_init(&hpriv->refcount);
+ nonseekable_open(inode, filp);
+
+ hl_cb_mgr_init(&hpriv->cb_mgr);
+ hl_ctx_mgr_init(&hpriv->ctx_mgr);
+
+ hpriv->taskpid = find_get_pid(current->pid);
+
+ mutex_lock(&hdev->fpriv_list_lock);
if (hl_device_disabled_or_in_reset(hdev)) {
dev_err_ratelimited(hdev->dev,
"Can't open %s because it is disabled or in reset\n",
dev_name(hdev->dev));
- mutex_unlock(&hdev->fd_open_cnt_lock);
- return -EPERM;
+ rc = -EPERM;
+ goto out_err;
}
if (hdev->in_debug) {
dev_err_ratelimited(hdev->dev,
"Can't open %s because it is being debugged by another user\n",
dev_name(hdev->dev));
- mutex_unlock(&hdev->fd_open_cnt_lock);
- return -EPERM;
+ rc = -EPERM;
+ goto out_err;
}
- if (atomic_read(&hdev->fd_open_cnt)) {
- dev_info_ratelimited(hdev->dev,
+ if (hdev->compute_ctx) {
+ dev_dbg_ratelimited(hdev->dev,
"Can't open %s because another user is working on it\n",
dev_name(hdev->dev));
- mutex_unlock(&hdev->fd_open_cnt_lock);
- return -EBUSY;
- }
-
- atomic_inc(&hdev->fd_open_cnt);
-
- mutex_unlock(&hdev->fd_open_cnt_lock);
-
- hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL);
- if (!hpriv) {
- rc = -ENOMEM;
- goto close_device;
+ rc = -EBUSY;
+ goto out_err;
}
- hpriv->hdev = hdev;
- filp->private_data = hpriv;
- hpriv->filp = filp;
- mutex_init(&hpriv->restore_phase_mutex);
- kref_init(&hpriv->refcount);
- nonseekable_open(inode, filp);
-
- hl_cb_mgr_init(&hpriv->cb_mgr);
- hl_ctx_mgr_init(&hpriv->ctx_mgr);
-
rc = hl_ctx_create(hdev, hpriv);
if (rc) {
- dev_err(hdev->dev, "Failed to open FD (CTX fail)\n");
+ dev_err(hdev->dev, "Failed to create context %d\n", rc);
goto out_err;
}
- hpriv->taskpid = find_get_pid(current->pid);
-
- /*
- * Device is IDLE at this point so it is legal to change PLLs. There
- * is no need to check anything because if the PLL is already HIGH, the
- * set function will return without doing anything
+ /* Device is IDLE at this point so it is legal to change PLLs.
+ * There is no need to check anything because if the PLL is
+ * already HIGH, the set function will return without doing
+ * anything
*/
hl_device_set_frequency(hdev, PLL_HIGH);
+ list_add(&hpriv->dev_node, &hdev->fpriv_list);
+ mutex_unlock(&hdev->fpriv_list_lock);
+
hl_debugfs_add_file(hpriv);
return 0;
out_err:
- filp->private_data = NULL;
- hl_ctx_mgr_fini(hpriv->hdev, &hpriv->ctx_mgr);
+ mutex_unlock(&hdev->fpriv_list_lock);
+
hl_cb_mgr_fini(hpriv->hdev, &hpriv->cb_mgr);
+ hl_ctx_mgr_fini(hpriv->hdev, &hpriv->ctx_mgr);
+ filp->private_data = NULL;
mutex_destroy(&hpriv->restore_phase_mutex);
+ put_pid(hpriv->taskpid);
+
kfree(hpriv);
+ return rc;
+}
+
+int hl_device_open_ctrl(struct inode *inode, struct file *filp)
+{
+ struct hl_device *hdev;
+ struct hl_fpriv *hpriv;
+ int rc;
+
+ mutex_lock(&hl_devs_idr_lock);
+ hdev = idr_find(&hl_devs_idr, iminor(inode));
+ mutex_unlock(&hl_devs_idr_lock);
+
+ if (!hdev) {
+ pr_err("Couldn't find device %d:%d\n",
+ imajor(inode), iminor(inode));
+ return -ENXIO;
+ }
+
+ hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL);
+ if (!hpriv)
+ return -ENOMEM;
+
+ mutex_lock(&hdev->fpriv_list_lock);
+
+ if (hl_device_disabled_or_in_reset(hdev)) {
+ dev_err_ratelimited(hdev->dev_ctrl,
+ "Can't open %s because it is disabled or in reset\n",
+ dev_name(hdev->dev_ctrl));
+ rc = -EPERM;
+ goto out_err;
+ }
-close_device:
- atomic_dec(&hdev->fd_open_cnt);
+ list_add(&hpriv->dev_node, &hdev->fpriv_list);
+ mutex_unlock(&hdev->fpriv_list_lock);
+
+ hpriv->hdev = hdev;
+ filp->private_data = hpriv;
+ hpriv->filp = filp;
+ hpriv->is_control = true;
+ nonseekable_open(inode, filp);
+
+ hpriv->taskpid = find_get_pid(current->pid);
+
+ return 0;
+
+out_err:
+ mutex_unlock(&hdev->fpriv_list_lock);
+ kfree(hpriv);
return rc;
}
@@ -199,7 +246,7 @@ int create_hdev(struct hl_device **dev, struct pci_dev *pdev,
enum hl_asic_type asic_type, int minor)
{
struct hl_device *hdev;
- int rc;
+ int rc, main_id, ctrl_id = 0;
*dev = NULL;
@@ -240,33 +287,34 @@ int create_hdev(struct hl_device **dev, struct pci_dev *pdev,
mutex_lock(&hl_devs_idr_lock);
- if (minor == -1) {
- rc = idr_alloc(&hl_devs_idr, hdev, 0, HL_MAX_MINORS,
+ /* Always save 2 numbers, 1 for main device and 1 for control.
+ * They must be consecutive
+ */
+ main_id = idr_alloc(&hl_devs_idr, hdev, 0, HL_MAX_MINORS,
GFP_KERNEL);
- } else {
- void *old_idr = idr_replace(&hl_devs_idr, hdev, minor);
- if (IS_ERR_VALUE(old_idr)) {
- rc = PTR_ERR(old_idr);
- pr_err("Error %d when trying to replace minor %d\n",
- rc, minor);
- mutex_unlock(&hl_devs_idr_lock);
- goto free_hdev;
- }
- rc = minor;
- }
+ if (main_id >= 0)
+ ctrl_id = idr_alloc(&hl_devs_idr, hdev, main_id + 1,
+ main_id + 2, GFP_KERNEL);
mutex_unlock(&hl_devs_idr_lock);
- if (rc < 0) {
- if (rc == -ENOSPC) {
+ if ((main_id < 0) || (ctrl_id < 0)) {
+ if ((main_id == -ENOSPC) || (ctrl_id == -ENOSPC))
pr_err("too many devices in the system\n");
- rc = -EBUSY;
+
+ if (main_id >= 0) {
+ mutex_lock(&hl_devs_idr_lock);
+ idr_remove(&hl_devs_idr, main_id);
+ mutex_unlock(&hl_devs_idr_lock);
}
+
+ rc = -EBUSY;
goto free_hdev;
}
- hdev->id = rc;
+ hdev->id = main_id;
+ hdev->id_control = ctrl_id;
*dev = hdev;
@@ -288,6 +336,7 @@ void destroy_hdev(struct hl_device *hdev)
/* Remove device from the device list */
mutex_lock(&hl_devs_idr_lock);
idr_remove(&hl_devs_idr, hdev->id);
+ idr_remove(&hl_devs_idr, hdev->id_control);
mutex_unlock(&hl_devs_idr_lock);
kfree(hdev);
@@ -295,8 +344,7 @@ void destroy_hdev(struct hl_device *hdev)
static int hl_pmops_suspend(struct device *dev)
{
- struct pci_dev *pdev = to_pci_dev(dev);
- struct hl_device *hdev = pci_get_drvdata(pdev);
+ struct hl_device *hdev = dev_get_drvdata(dev);
pr_debug("Going to suspend PCI device\n");
@@ -310,8 +358,7 @@ static int hl_pmops_suspend(struct device *dev)
static int hl_pmops_resume(struct device *dev)
{
- struct pci_dev *pdev = to_pci_dev(dev);
- struct hl_device *hdev = pci_get_drvdata(pdev);
+ struct hl_device *hdev = dev_get_drvdata(dev);
pr_debug("Going to resume PCI device\n");
diff --git a/drivers/misc/habanalabs/habanalabs_ioctl.c b/drivers/misc/habanalabs/habanalabs_ioctl.c
index 07127576b3e8..66d9c710073c 100644
--- a/drivers/misc/habanalabs/habanalabs_ioctl.c
+++ b/drivers/misc/habanalabs/habanalabs_ioctl.c
@@ -65,7 +65,7 @@ static int hw_ip_info(struct hl_device *hdev, struct hl_info_args *args)
hw_ip.num_of_events = prop->num_of_events;
memcpy(hw_ip.armcp_version,
prop->armcp_info.armcp_version, VERSION_MAX_LEN);
- hw_ip.armcp_cpld_version = __le32_to_cpu(prop->armcp_info.cpld_version);
+ hw_ip.armcp_cpld_version = le32_to_cpu(prop->armcp_info.cpld_version);
hw_ip.psoc_pci_pll_nr = prop->psoc_pci_pll_nr;
hw_ip.psoc_pci_pll_nf = prop->psoc_pci_pll_nf;
hw_ip.psoc_pci_pll_od = prop->psoc_pci_pll_od;
@@ -75,7 +75,8 @@ static int hw_ip_info(struct hl_device *hdev, struct hl_info_args *args)
min((size_t)size, sizeof(hw_ip))) ? -EFAULT : 0;
}
-static int hw_events_info(struct hl_device *hdev, struct hl_info_args *args)
+static int hw_events_info(struct hl_device *hdev, bool aggregate,
+ struct hl_info_args *args)
{
u32 size, max_size = args->return_size;
void __user *out = (void __user *) (uintptr_t) args->return_pointer;
@@ -84,13 +85,14 @@ static int hw_events_info(struct hl_device *hdev, struct hl_info_args *args)
if ((!max_size) || (!out))
return -EINVAL;
- arr = hdev->asic_funcs->get_events_stat(hdev, &size);
+ arr = hdev->asic_funcs->get_events_stat(hdev, aggregate, &size);
return copy_to_user(out, arr, min(max_size, size)) ? -EFAULT : 0;
}
-static int dram_usage_info(struct hl_device *hdev, struct hl_info_args *args)
+static int dram_usage_info(struct hl_fpriv *hpriv, struct hl_info_args *args)
{
+ struct hl_device *hdev = hpriv->hdev;
struct hl_info_dram_usage dram_usage = {0};
u32 max_size = args->return_size;
void __user *out = (void __user *) (uintptr_t) args->return_pointer;
@@ -104,7 +106,9 @@ static int dram_usage_info(struct hl_device *hdev, struct hl_info_args *args)
prop->dram_base_address);
dram_usage.dram_free_mem = (prop->dram_size - dram_kmd_size) -
atomic64_read(&hdev->dram_used_mem);
- dram_usage.ctx_dram_mem = atomic64_read(&hdev->user_ctx->dram_phys_mem);
+ if (hpriv->ctx)
+ dram_usage.ctx_dram_mem =
+ atomic64_read(&hpriv->ctx->dram_phys_mem);
return copy_to_user(out, &dram_usage,
min((size_t) max_size, sizeof(dram_usage))) ? -EFAULT : 0;
@@ -141,13 +145,16 @@ static int debug_coresight(struct hl_device *hdev, struct hl_debug_args *args)
params->op = args->op;
if (args->input_ptr && args->input_size) {
- input = memdup_user(u64_to_user_ptr(args->input_ptr),
- args->input_size);
- if (IS_ERR(input)) {
- rc = PTR_ERR(input);
- input = NULL;
- dev_err(hdev->dev,
- "error %d when copying input debug data\n", rc);
+ input = kzalloc(hl_debug_struct_size[args->op], GFP_KERNEL);
+ if (!input) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ if (copy_from_user(input, u64_to_user_ptr(args->input_ptr),
+ args->input_size)) {
+ rc = -EFAULT;
+ dev_err(hdev->dev, "failed to copy input debug data\n");
goto out;
}
@@ -191,42 +198,81 @@ out:
return rc;
}
-static int hl_info_ioctl(struct hl_fpriv *hpriv, void *data)
+static int device_utilization(struct hl_device *hdev, struct hl_info_args *args)
+{
+ struct hl_info_device_utilization device_util = {0};
+ u32 max_size = args->return_size;
+ void __user *out = (void __user *) (uintptr_t) args->return_pointer;
+
+ if ((!max_size) || (!out))
+ return -EINVAL;
+
+ if ((args->period_ms < 100) || (args->period_ms > 1000) ||
+ (args->period_ms % 100)) {
+ dev_err(hdev->dev,
+ "period %u must be between 100 - 1000 and must be divisible by 100\n",
+ args->period_ms);
+ return -EINVAL;
+ }
+
+ device_util.utilization = hl_device_utilization(hdev, args->period_ms);
+
+ return copy_to_user(out, &device_util,
+ min((size_t) max_size, sizeof(device_util))) ? -EFAULT : 0;
+}
+
+static int _hl_info_ioctl(struct hl_fpriv *hpriv, void *data,
+ struct device *dev)
{
struct hl_info_args *args = data;
struct hl_device *hdev = hpriv->hdev;
int rc;
- /* We want to return device status even if it disabled or in reset */
- if (args->op == HL_INFO_DEVICE_STATUS)
+ /*
+ * Information is returned for the following opcodes even if the device
+ * is disabled or in reset.
+ */
+ switch (args->op) {
+ case HL_INFO_HW_IP_INFO:
+ return hw_ip_info(hdev, args);
+
+ case HL_INFO_DEVICE_STATUS:
return device_status_info(hdev, args);
+ default:
+ break;
+ }
+
if (hl_device_disabled_or_in_reset(hdev)) {
- dev_warn_ratelimited(hdev->dev,
+ dev_warn_ratelimited(dev,
"Device is %s. Can't execute INFO IOCTL\n",
atomic_read(&hdev->in_reset) ? "in_reset" : "disabled");
return -EBUSY;
}
switch (args->op) {
- case HL_INFO_HW_IP_INFO:
- rc = hw_ip_info(hdev, args);
- break;
-
case HL_INFO_HW_EVENTS:
- rc = hw_events_info(hdev, args);
+ rc = hw_events_info(hdev, false, args);
break;
case HL_INFO_DRAM_USAGE:
- rc = dram_usage_info(hdev, args);
+ rc = dram_usage_info(hpriv, args);
break;
case HL_INFO_HW_IDLE:
rc = hw_idle(hdev, args);
break;
+ case HL_INFO_DEVICE_UTILIZATION:
+ rc = device_utilization(hdev, args);
+ break;
+
+ case HL_INFO_HW_EVENTS_AGGREGATE:
+ rc = hw_events_info(hdev, true, args);
+ break;
+
default:
- dev_err(hdev->dev, "Invalid request %d\n", args->op);
+ dev_err(dev, "Invalid request %d\n", args->op);
rc = -ENOTTY;
break;
}
@@ -234,6 +280,16 @@ static int hl_info_ioctl(struct hl_fpriv *hpriv, void *data)
return rc;
}
+static int hl_info_ioctl(struct hl_fpriv *hpriv, void *data)
+{
+ return _hl_info_ioctl(hpriv, data, hpriv->hdev->dev);
+}
+
+static int hl_info_ioctl_control(struct hl_fpriv *hpriv, void *data)
+{
+ return _hl_info_ioctl(hpriv, data, hpriv->hdev->dev_ctrl);
+}
+
static int hl_debug_ioctl(struct hl_fpriv *hpriv, void *data)
{
struct hl_debug_args *args = data;
@@ -288,52 +344,45 @@ static const struct hl_ioctl_desc hl_ioctls[] = {
HL_IOCTL_DEF(HL_IOCTL_DEBUG, hl_debug_ioctl)
};
-#define HL_CORE_IOCTL_COUNT ARRAY_SIZE(hl_ioctls)
+static const struct hl_ioctl_desc hl_ioctls_control[] = {
+ HL_IOCTL_DEF(HL_IOCTL_INFO, hl_info_ioctl_control)
+};
-long hl_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
+static long _hl_ioctl(struct file *filep, unsigned int cmd, unsigned long arg,
+ const struct hl_ioctl_desc *ioctl, struct device *dev)
{
struct hl_fpriv *hpriv = filep->private_data;
struct hl_device *hdev = hpriv->hdev;
- hl_ioctl_t *func;
- const struct hl_ioctl_desc *ioctl = NULL;
unsigned int nr = _IOC_NR(cmd);
char stack_kdata[128] = {0};
char *kdata = NULL;
unsigned int usize, asize;
+ hl_ioctl_t *func;
+ u32 hl_size;
int retcode;
if (hdev->hard_reset_pending) {
- dev_crit_ratelimited(hdev->dev,
+ dev_crit_ratelimited(hdev->dev_ctrl,
"Device HARD reset pending! Please close FD\n");
return -ENODEV;
}
- if ((nr >= HL_COMMAND_START) && (nr < HL_COMMAND_END)) {
- u32 hl_size;
-
- ioctl = &hl_ioctls[nr];
-
- hl_size = _IOC_SIZE(ioctl->cmd);
- usize = asize = _IOC_SIZE(cmd);
- if (hl_size > asize)
- asize = hl_size;
-
- cmd = ioctl->cmd;
- } else {
- dev_err(hdev->dev, "invalid ioctl: pid=%d, nr=0x%02x\n",
- task_pid_nr(current), nr);
- return -ENOTTY;
- }
-
/* Do not trust userspace, use our own definition */
func = ioctl->func;
if (unlikely(!func)) {
- dev_dbg(hdev->dev, "no function\n");
+ dev_dbg(dev, "no function\n");
retcode = -ENOTTY;
goto out_err;
}
+ hl_size = _IOC_SIZE(ioctl->cmd);
+ usize = asize = _IOC_SIZE(cmd);
+ if (hl_size > asize)
+ asize = hl_size;
+
+ cmd = ioctl->cmd;
+
if (cmd & (IOC_IN | IOC_OUT)) {
if (asize <= sizeof(stack_kdata)) {
kdata = stack_kdata;
@@ -363,8 +412,7 @@ long hl_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
out_err:
if (retcode)
- dev_dbg(hdev->dev,
- "error in ioctl: pid=%d, cmd=0x%02x, nr=0x%02x\n",
+ dev_dbg(dev, "error in ioctl: pid=%d, cmd=0x%02x, nr=0x%02x\n",
task_pid_nr(current), cmd, nr);
if (kdata != stack_kdata)
@@ -372,3 +420,39 @@ out_err:
return retcode;
}
+
+long hl_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
+{
+ struct hl_fpriv *hpriv = filep->private_data;
+ struct hl_device *hdev = hpriv->hdev;
+ const struct hl_ioctl_desc *ioctl = NULL;
+ unsigned int nr = _IOC_NR(cmd);
+
+ if ((nr >= HL_COMMAND_START) && (nr < HL_COMMAND_END)) {
+ ioctl = &hl_ioctls[nr];
+ } else {
+ dev_err(hdev->dev, "invalid ioctl: pid=%d, nr=0x%02x\n",
+ task_pid_nr(current), nr);
+ return -ENOTTY;
+ }
+
+ return _hl_ioctl(filep, cmd, arg, ioctl, hdev->dev);
+}
+
+long hl_ioctl_control(struct file *filep, unsigned int cmd, unsigned long arg)
+{
+ struct hl_fpriv *hpriv = filep->private_data;
+ struct hl_device *hdev = hpriv->hdev;
+ const struct hl_ioctl_desc *ioctl = NULL;
+ unsigned int nr = _IOC_NR(cmd);
+
+ if (nr == _IOC_NR(HL_IOCTL_INFO)) {
+ ioctl = &hl_ioctls_control[nr];
+ } else {
+ dev_err(hdev->dev_ctrl, "invalid ioctl: pid=%d, nr=0x%02x\n",
+ task_pid_nr(current), nr);
+ return -ENOTTY;
+ }
+
+ return _hl_ioctl(filep, cmd, arg, ioctl, hdev->dev_ctrl);
+}
diff --git a/drivers/misc/habanalabs/hw_queue.c b/drivers/misc/habanalabs/hw_queue.c
index 5f5673b74985..55b383b2a116 100644
--- a/drivers/misc/habanalabs/hw_queue.c
+++ b/drivers/misc/habanalabs/hw_queue.c
@@ -80,9 +80,9 @@ static void ext_queue_submit_bd(struct hl_device *hdev, struct hl_hw_queue *q,
bd = (struct hl_bd *) (uintptr_t) q->kernel_address;
bd += hl_pi_2_offset(q->pi);
- bd->ctl = __cpu_to_le32(ctl);
- bd->len = __cpu_to_le32(len);
- bd->ptr = __cpu_to_le64(ptr);
+ bd->ctl = cpu_to_le32(ctl);
+ bd->len = cpu_to_le32(len);
+ bd->ptr = cpu_to_le64(ptr);
q->pi = hl_queue_inc_ptr(q->pi);
hdev->asic_funcs->ring_doorbell(hdev, q->hw_queue_id, q->pi);
@@ -249,7 +249,7 @@ static void ext_hw_queue_schedule_job(struct hl_cs_job *job)
len = job->job_cb_size;
ptr = cb->bus_address;
- cq_pkt.data = __cpu_to_le32(
+ cq_pkt.data = cpu_to_le32(
((q->pi << CQ_ENTRY_SHADOW_INDEX_SHIFT)
& CQ_ENTRY_SHADOW_INDEX_MASK) |
(1 << CQ_ENTRY_SHADOW_INDEX_VALID_SHIFT) |
@@ -267,7 +267,7 @@ static void ext_hw_queue_schedule_job(struct hl_cs_job *job)
hdev->asic_funcs->add_end_of_cb_packets(hdev, cb->kernel_address, len,
cq_addr,
- __le32_to_cpu(cq_pkt.data),
+ le32_to_cpu(cq_pkt.data),
q->hw_queue_id);
q->shadow_queue[hl_pi_2_offset(q->pi)] = job;
@@ -364,7 +364,13 @@ int hl_hw_queue_schedule_cs(struct hl_cs *cs)
spin_unlock(&hdev->hw_queues_mirror_lock);
}
- atomic_inc(&hdev->cs_active_cnt);
+ if (!hdev->cs_active_cnt++) {
+ struct hl_device_idle_busy_ts *ts;
+
+ ts = &hdev->idle_busy_ts_arr[hdev->idle_busy_ts_idx];
+ ts->busy_to_idle_ts = ktime_set(0, 0);
+ ts->idle_to_busy_ts = ktime_get();
+ }
list_for_each_entry_safe(job, tmp, &cs->job_list, cs_node)
if (job->ext_queue)
diff --git a/drivers/misc/habanalabs/hwmon.c b/drivers/misc/habanalabs/hwmon.c
index 77facd25c4a2..7be4bace9b4f 100644
--- a/drivers/misc/habanalabs/hwmon.c
+++ b/drivers/misc/habanalabs/hwmon.c
@@ -26,7 +26,7 @@ int hl_build_hwmon_channel_info(struct hl_device *hdev,
int rc, i, j;
for (i = 0 ; i < ARMCP_MAX_SENSORS ; i++) {
- type = __le32_to_cpu(sensors_arr[i].type);
+ type = le32_to_cpu(sensors_arr[i].type);
if ((type == 0) && (sensors_arr[i].flags == 0))
break;
@@ -58,10 +58,10 @@ int hl_build_hwmon_channel_info(struct hl_device *hdev,
}
for (i = 0 ; i < arr_size ; i++) {
- type = __le32_to_cpu(sensors_arr[i].type);
+ type = le32_to_cpu(sensors_arr[i].type);
curr_arr = sensors_by_type[type];
curr_arr[sensors_by_type_next_index[type]++] =
- __le32_to_cpu(sensors_arr[i].flags);
+ le32_to_cpu(sensors_arr[i].flags);
}
channels_info = kcalloc(num_active_sensor_types + 1,
@@ -273,7 +273,7 @@ long hl_get_temperature(struct hl_device *hdev, int sensor_index, u32 attr)
memset(&pkt, 0, sizeof(pkt));
- pkt.ctl = __cpu_to_le32(ARMCP_PACKET_TEMPERATURE_GET <<
+ pkt.ctl = cpu_to_le32(ARMCP_PACKET_TEMPERATURE_GET <<
ARMCP_PKT_CTL_OPCODE_SHIFT);
pkt.sensor_index = __cpu_to_le16(sensor_index);
pkt.type = __cpu_to_le16(attr);
@@ -299,7 +299,7 @@ long hl_get_voltage(struct hl_device *hdev, int sensor_index, u32 attr)
memset(&pkt, 0, sizeof(pkt));
- pkt.ctl = __cpu_to_le32(ARMCP_PACKET_VOLTAGE_GET <<
+ pkt.ctl = cpu_to_le32(ARMCP_PACKET_VOLTAGE_GET <<
ARMCP_PKT_CTL_OPCODE_SHIFT);
pkt.sensor_index = __cpu_to_le16(sensor_index);
pkt.type = __cpu_to_le16(attr);
@@ -325,7 +325,7 @@ long hl_get_current(struct hl_device *hdev, int sensor_index, u32 attr)
memset(&pkt, 0, sizeof(pkt));
- pkt.ctl = __cpu_to_le32(ARMCP_PACKET_CURRENT_GET <<
+ pkt.ctl = cpu_to_le32(ARMCP_PACKET_CURRENT_GET <<
ARMCP_PKT_CTL_OPCODE_SHIFT);
pkt.sensor_index = __cpu_to_le16(sensor_index);
pkt.type = __cpu_to_le16(attr);
@@ -351,7 +351,7 @@ long hl_get_fan_speed(struct hl_device *hdev, int sensor_index, u32 attr)
memset(&pkt, 0, sizeof(pkt));
- pkt.ctl = __cpu_to_le32(ARMCP_PACKET_FAN_SPEED_GET <<
+ pkt.ctl = cpu_to_le32(ARMCP_PACKET_FAN_SPEED_GET <<
ARMCP_PKT_CTL_OPCODE_SHIFT);
pkt.sensor_index = __cpu_to_le16(sensor_index);
pkt.type = __cpu_to_le16(attr);
@@ -377,7 +377,7 @@ long hl_get_pwm_info(struct hl_device *hdev, int sensor_index, u32 attr)
memset(&pkt, 0, sizeof(pkt));
- pkt.ctl = __cpu_to_le32(ARMCP_PACKET_PWM_GET <<
+ pkt.ctl = cpu_to_le32(ARMCP_PACKET_PWM_GET <<
ARMCP_PKT_CTL_OPCODE_SHIFT);
pkt.sensor_index = __cpu_to_le16(sensor_index);
pkt.type = __cpu_to_le16(attr);
@@ -403,11 +403,11 @@ void hl_set_pwm_info(struct hl_device *hdev, int sensor_index, u32 attr,
memset(&pkt, 0, sizeof(pkt));
- pkt.ctl = __cpu_to_le32(ARMCP_PACKET_PWM_SET <<
+ pkt.ctl = cpu_to_le32(ARMCP_PACKET_PWM_SET <<
ARMCP_PKT_CTL_OPCODE_SHIFT);
pkt.sensor_index = __cpu_to_le16(sensor_index);
pkt.type = __cpu_to_le16(attr);
- pkt.value = __cpu_to_le64(value);
+ pkt.value = cpu_to_le64(value);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
SENSORS_PKT_TIMEOUT, NULL);
@@ -421,6 +421,7 @@ void hl_set_pwm_info(struct hl_device *hdev, int sensor_index, u32 attr,
int hl_hwmon_init(struct hl_device *hdev)
{
struct device *dev = hdev->pdev ? &hdev->pdev->dev : hdev->dev;
+ struct asic_fixed_properties *prop = &hdev->asic_prop;
int rc;
if ((hdev->hwmon_initialized) || !(hdev->fw_loading))
@@ -430,7 +431,8 @@ int hl_hwmon_init(struct hl_device *hdev)
hdev->hl_chip_info->ops = &hl_hwmon_ops;
hdev->hwmon_dev = hwmon_device_register_with_info(dev,
- "habanalabs", hdev, hdev->hl_chip_info, NULL);
+ prop->armcp_info.card_name, hdev,
+ hdev->hl_chip_info, NULL);
if (IS_ERR(hdev->hwmon_dev)) {
rc = PTR_ERR(hdev->hwmon_dev);
dev_err(hdev->dev,
diff --git a/drivers/misc/habanalabs/include/armcp_if.h b/drivers/misc/habanalabs/include/armcp_if.h
index 1f1e35e86d84..e4c6699a1868 100644
--- a/drivers/misc/habanalabs/include/armcp_if.h
+++ b/drivers/misc/habanalabs/include/armcp_if.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0
*
- * Copyright 2016-2018 HabanaLabs, Ltd.
+ * Copyright 2016-2019 HabanaLabs, Ltd.
* All Rights Reserved.
*
*/
@@ -41,33 +41,34 @@ enum pq_init_status {
/*
* ArmCP Primary Queue Packets
*
- * During normal operation, KMD needs to send various messages to ArmCP,
- * usually either to SET some value into a H/W periphery or to GET the current
- * value of some H/W periphery. For example, SET the frequency of MME/TPC and
- * GET the value of the thermal sensor.
- *
- * These messages can be initiated either by the User application or by KMD
- * itself, e.g. power management code. In either case, the communication from
- * KMD to ArmCP will *always* be in synchronous mode, meaning that KMD will
- * send a single message and poll until the message was acknowledged and the
- * results are ready (if results are needed).
- *
- * This means that only a single message can be sent at a time and KMD must
- * wait for its result before sending the next message. Having said that,
- * because these are control messages which are sent in a relatively low
+ * During normal operation, the host's kernel driver needs to send various
+ * messages to ArmCP, usually either to SET some value into a H/W periphery or
+ * to GET the current value of some H/W periphery. For example, SET the
+ * frequency of MME/TPC and GET the value of the thermal sensor.
+ *
+ * These messages can be initiated either by the User application or by the
+ * host's driver itself, e.g. power management code. In either case, the
+ * communication from the host's driver to ArmCP will *always* be in
+ * synchronous mode, meaning that the host will send a single message and poll
+ * until the message was acknowledged and the results are ready (if results are
+ * needed).
+ *
+ * This means that only a single message can be sent at a time and the host's
+ * driver must wait for its result before sending the next message. Having said
+ * that, because these are control messages which are sent in a relatively low
* frequency, this limitation seems acceptable. It's important to note that
* in case of multiple devices, messages to different devices *can* be sent
* at the same time.
*
* The message, inputs/outputs (if relevant) and fence object will be located
- * on the device DDR at an address that will be determined by KMD. During
- * device initialization phase, KMD will pass to ArmCP that address. Most of
- * the message types will contain inputs/outputs inside the message itself.
- * The common part of each message will contain the opcode of the message (its
- * type) and a field representing a fence object.
- *
- * When KMD wishes to send a message to ArmCP, it will write the message
- * contents to the device DDR, clear the fence object and then write the
+ * on the device DDR at an address that will be determined by the host's driver.
+ * During device initialization phase, the host will pass to ArmCP that address.
+ * Most of the message types will contain inputs/outputs inside the message
+ * itself. The common part of each message will contain the opcode of the
+ * message (its type) and a field representing a fence object.
+ *
+ * When the host's driver wishes to send a message to ArmCP, it will write the
+ * message contents to the device DDR, clear the fence object and then write the
* value 484 to the mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR register to issue
* the 484 interrupt-id to the ARM core.
*
@@ -78,12 +79,13 @@ enum pq_init_status {
* device DDR and then write to the fence object. If an error occurred, ArmCP
* will fill the rc field with the right error code.
*
- * In the meantime, KMD will poll on the fence object. Once KMD sees that the
- * fence object is signaled, it will read the results from the device DDR
- * (if relevant) and resume the code execution in KMD.
+ * In the meantime, the host's driver will poll on the fence object. Once the
+ * host sees that the fence object is signaled, it will read the results from
+ * the device DDR (if relevant) and resume the code execution in the host's
+ * driver.
*
* To use QMAN packets, the opcode must be the QMAN opcode, shifted by 8
- * so the value being put by the KMD matches the value read by ArmCP
+ * so the value being put by the host's driver matches the value read by ArmCP
*
* Non-QMAN packets should be limited to values 1 through (2^8 - 1)
*
@@ -148,9 +150,9 @@ enum pq_init_status {
*
* ARMCP_PACKET_INFO_GET -
* Fetch information from the device as specified in the packet's
- * structure. KMD passes the max size it allows the ArmCP to write to
- * the structure, to prevent data corruption in case of mismatched
- * KMD/FW versions.
+ * structure. The host's driver passes the max size it allows the ArmCP to
+ * write to the structure, to prevent data corruption in case of
+ * mismatched driver/FW versions.
*
* ARMCP_PACKET_FLASH_PROGRAM_REMOVED - this packet was removed
*
@@ -183,9 +185,9 @@ enum pq_init_status {
* ARMCP_PACKET_EEPROM_DATA_GET -
* Get EEPROM data from the ArmCP kernel. The buffer is specified in the
* addr field. The CPU will put the returned data size in the result
- * field. In addition, KMD passes the max size it allows the ArmCP to
- * write to the structure, to prevent data corruption in case of
- * mismatched KMD/FW versions.
+ * field. In addition, the host's driver passes the max size it allows the
+ * ArmCP to write to the structure, to prevent data corruption in case of
+ * mismatched driver/FW versions.
*
*/
@@ -231,7 +233,7 @@ struct armcp_packet {
__le32 ctl;
- __le32 fence; /* Signal to KMD that message is completed */
+ __le32 fence; /* Signal to host that message is completed */
union {
struct {/* For temperature/current/voltage/fan/pwm get/set */
@@ -310,6 +312,7 @@ struct eq_generic_event {
* ArmCP info
*/
+#define CARD_NAME_MAX_LEN 16
#define VERSION_MAX_LEN 128
#define ARMCP_MAX_SENSORS 128
@@ -318,6 +321,19 @@ struct armcp_sensor {
__le32 flags;
};
+/**
+ * struct armcp_info - Info from ArmCP that is necessary to the host's driver
+ * @sensors: available sensors description.
+ * @kernel_version: ArmCP linux kernel version.
+ * @reserved: reserved field.
+ * @cpld_version: CPLD programmed F/W version.
+ * @infineon_version: Infineon main DC-DC version.
+ * @fuse_version: silicon production FUSE information.
+ * @thermal_version: thermald S/W version.
+ * @armcp_version: ArmCP S/W version.
+ * @dram_size: available DRAM size.
+ * @card_name: card name that will be displayed in HWMON subsystem on the host
+ */
struct armcp_info {
struct armcp_sensor sensors[ARMCP_MAX_SENSORS];
__u8 kernel_version[VERSION_MAX_LEN];
@@ -328,6 +344,7 @@ struct armcp_info {
__u8 thermal_version[VERSION_MAX_LEN];
__u8 armcp_version[VERSION_MAX_LEN];
__le64 dram_size;
+ char card_name[CARD_NAME_MAX_LEN];
};
#endif /* ARMCP_IF_H */
diff --git a/drivers/misc/habanalabs/include/goya/goya.h b/drivers/misc/habanalabs/include/goya/goya.h
index 3f02a52ba4ce..43d241891e45 100644
--- a/drivers/misc/habanalabs/include/goya/goya.h
+++ b/drivers/misc/habanalabs/include/goya/goya.h
@@ -38,4 +38,6 @@
#define TPC_MAX_NUM 8
+#define MME_MAX_NUM 1
+
#endif /* GOYA_H */
diff --git a/drivers/misc/habanalabs/include/goya/goya_reg_map.h b/drivers/misc/habanalabs/include/goya/goya_reg_map.h
new file mode 100644
index 000000000000..cd89723c7f61
--- /dev/null
+++ b/drivers/misc/habanalabs/include/goya/goya_reg_map.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright 2019 HabanaLabs, Ltd.
+ * All Rights Reserved.
+ *
+ */
+
+#ifndef GOYA_REG_MAP_H_
+#define GOYA_REG_MAP_H_
+
+/*
+ * PSOC scratch-pad registers
+ */
+#define mmCPU_PQ_BASE_ADDR_LOW mmPSOC_GLOBAL_CONF_SCRATCHPAD_0
+#define mmCPU_PQ_BASE_ADDR_HIGH mmPSOC_GLOBAL_CONF_SCRATCHPAD_1
+#define mmCPU_EQ_BASE_ADDR_LOW mmPSOC_GLOBAL_CONF_SCRATCHPAD_2
+#define mmCPU_EQ_BASE_ADDR_HIGH mmPSOC_GLOBAL_CONF_SCRATCHPAD_3
+#define mmCPU_EQ_LENGTH mmPSOC_GLOBAL_CONF_SCRATCHPAD_4
+#define mmCPU_PQ_LENGTH mmPSOC_GLOBAL_CONF_SCRATCHPAD_5
+#define mmCPU_EQ_CI mmPSOC_GLOBAL_CONF_SCRATCHPAD_6
+#define mmCPU_PQ_INIT_STATUS mmPSOC_GLOBAL_CONF_SCRATCHPAD_7
+#define mmCPU_CQ_BASE_ADDR_LOW mmPSOC_GLOBAL_CONF_SCRATCHPAD_8
+#define mmCPU_CQ_BASE_ADDR_HIGH mmPSOC_GLOBAL_CONF_SCRATCHPAD_9
+#define mmCPU_CQ_LENGTH mmPSOC_GLOBAL_CONF_SCRATCHPAD_10
+#define mmUPD_STS mmPSOC_GLOBAL_CONF_SCRATCHPAD_26
+#define mmUPD_CMD mmPSOC_GLOBAL_CONF_SCRATCHPAD_27
+#define mmPREBOOT_VER_OFFSET mmPSOC_GLOBAL_CONF_SCRATCHPAD_28
+#define mmUBOOT_VER_OFFSET mmPSOC_GLOBAL_CONF_SCRATCHPAD_29
+#define mmUBOOT_OFFSET mmPSOC_GLOBAL_CONF_SCRATCHPAD_30
+#define mmBTL_ID mmPSOC_GLOBAL_CONF_SCRATCHPAD_31
+
+#define mmHW_STATE mmPSOC_GLOBAL_CONF_APP_STATUS
+
+#endif /* GOYA_REG_MAP_H_ */
diff --git a/drivers/misc/habanalabs/irq.c b/drivers/misc/habanalabs/irq.c
index 199791b57caf..fac65fbd70e8 100644
--- a/drivers/misc/habanalabs/irq.c
+++ b/drivers/misc/habanalabs/irq.c
@@ -160,7 +160,7 @@ irqreturn_t hl_irq_handler_eq(int irq, void *arg)
while (1) {
bool entry_ready =
- ((__le32_to_cpu(eq_base[eq->ci].hdr.ctl) &
+ ((le32_to_cpu(eq_base[eq->ci].hdr.ctl) &
EQ_CTL_READY_MASK) >> EQ_CTL_READY_SHIFT);
if (!entry_ready)
@@ -194,7 +194,7 @@ irqreturn_t hl_irq_handler_eq(int irq, void *arg)
skip_irq:
/* Clear EQ entry ready bit */
eq_entry->hdr.ctl =
- __cpu_to_le32(__le32_to_cpu(eq_entry->hdr.ctl) &
+ cpu_to_le32(le32_to_cpu(eq_entry->hdr.ctl) &
~EQ_CTL_READY_MASK);
eq->ci = hl_eq_inc_ptr(eq->ci);
diff --git a/drivers/misc/habanalabs/sysfs.c b/drivers/misc/habanalabs/sysfs.c
index 25eb46d29d88..4cd622b017b9 100644
--- a/drivers/misc/habanalabs/sysfs.c
+++ b/drivers/misc/habanalabs/sysfs.c
@@ -21,12 +21,12 @@ long hl_get_frequency(struct hl_device *hdev, u32 pll_index, bool curr)
memset(&pkt, 0, sizeof(pkt));
if (curr)
- pkt.ctl = __cpu_to_le32(ARMCP_PACKET_FREQUENCY_CURR_GET <<
+ pkt.ctl = cpu_to_le32(ARMCP_PACKET_FREQUENCY_CURR_GET <<
ARMCP_PKT_CTL_OPCODE_SHIFT);
else
- pkt.ctl = __cpu_to_le32(ARMCP_PACKET_FREQUENCY_GET <<
+ pkt.ctl = cpu_to_le32(ARMCP_PACKET_FREQUENCY_GET <<
ARMCP_PKT_CTL_OPCODE_SHIFT);
- pkt.pll_index = __cpu_to_le32(pll_index);
+ pkt.pll_index = cpu_to_le32(pll_index);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
SET_CLK_PKT_TIMEOUT, &result);
@@ -48,10 +48,10 @@ void hl_set_frequency(struct hl_device *hdev, u32 pll_index, u64 freq)
memset(&pkt, 0, sizeof(pkt));
- pkt.ctl = __cpu_to_le32(ARMCP_PACKET_FREQUENCY_SET <<
+ pkt.ctl = cpu_to_le32(ARMCP_PACKET_FREQUENCY_SET <<
ARMCP_PKT_CTL_OPCODE_SHIFT);
- pkt.pll_index = __cpu_to_le32(pll_index);
- pkt.value = __cpu_to_le64(freq);
+ pkt.pll_index = cpu_to_le32(pll_index);
+ pkt.value = cpu_to_le64(freq);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
SET_CLK_PKT_TIMEOUT, NULL);
@@ -70,7 +70,7 @@ u64 hl_get_max_power(struct hl_device *hdev)
memset(&pkt, 0, sizeof(pkt));
- pkt.ctl = __cpu_to_le32(ARMCP_PACKET_MAX_POWER_GET <<
+ pkt.ctl = cpu_to_le32(ARMCP_PACKET_MAX_POWER_GET <<
ARMCP_PKT_CTL_OPCODE_SHIFT);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
@@ -91,9 +91,9 @@ void hl_set_max_power(struct hl_device *hdev, u64 value)
memset(&pkt, 0, sizeof(pkt));
- pkt.ctl = __cpu_to_le32(ARMCP_PACKET_MAX_POWER_SET <<
+ pkt.ctl = cpu_to_le32(ARMCP_PACKET_MAX_POWER_SET <<
ARMCP_PKT_CTL_OPCODE_SHIFT);
- pkt.value = __cpu_to_le64(value);
+ pkt.value = cpu_to_le64(value);
rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
SET_PWR_PKT_TIMEOUT, NULL);
@@ -102,100 +102,6 @@ void hl_set_max_power(struct hl_device *hdev, u64 value)
dev_err(hdev->dev, "Failed to set max power, error %d\n", rc);
}
-static ssize_t pm_mng_profile_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct hl_device *hdev = dev_get_drvdata(dev);
-
- if (hl_device_disabled_or_in_reset(hdev))
- return -ENODEV;
-
- return sprintf(buf, "%s\n",
- (hdev->pm_mng_profile == PM_AUTO) ? "auto" :
- (hdev->pm_mng_profile == PM_MANUAL) ? "manual" :
- "unknown");
-}
-
-static ssize_t pm_mng_profile_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- struct hl_device *hdev = dev_get_drvdata(dev);
-
- if (hl_device_disabled_or_in_reset(hdev)) {
- count = -ENODEV;
- goto out;
- }
-
- mutex_lock(&hdev->fd_open_cnt_lock);
-
- if (atomic_read(&hdev->fd_open_cnt) > 0) {
- dev_err(hdev->dev,
- "Can't change PM profile while user process is opened on the device\n");
- count = -EPERM;
- goto unlock_mutex;
- }
-
- if (strncmp("auto", buf, strlen("auto")) == 0) {
- /* Make sure we are in LOW PLL when changing modes */
- if (hdev->pm_mng_profile == PM_MANUAL) {
- atomic_set(&hdev->curr_pll_profile, PLL_HIGH);
- hl_device_set_frequency(hdev, PLL_LOW);
- hdev->pm_mng_profile = PM_AUTO;
- }
- } else if (strncmp("manual", buf, strlen("manual")) == 0) {
- /* Make sure we are in LOW PLL when changing modes */
- if (hdev->pm_mng_profile == PM_AUTO) {
- flush_delayed_work(&hdev->work_freq);
- hdev->pm_mng_profile = PM_MANUAL;
- }
- } else {
- dev_err(hdev->dev, "value should be auto or manual\n");
- count = -EINVAL;
- goto unlock_mutex;
- }
-
-unlock_mutex:
- mutex_unlock(&hdev->fd_open_cnt_lock);
-out:
- return count;
-}
-
-static ssize_t high_pll_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct hl_device *hdev = dev_get_drvdata(dev);
-
- if (hl_device_disabled_or_in_reset(hdev))
- return -ENODEV;
-
- return sprintf(buf, "%u\n", hdev->high_pll);
-}
-
-static ssize_t high_pll_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct hl_device *hdev = dev_get_drvdata(dev);
- long value;
- int rc;
-
- if (hl_device_disabled_or_in_reset(hdev)) {
- count = -ENODEV;
- goto out;
- }
-
- rc = kstrtoul(buf, 0, &value);
-
- if (rc) {
- count = -EINVAL;
- goto out;
- }
-
- hdev->high_pll = value;
-
-out:
- return count;
-}
-
static ssize_t uboot_ver_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
@@ -351,14 +257,6 @@ static ssize_t status_show(struct device *dev, struct device_attribute *attr,
return sprintf(buf, "%s\n", str);
}
-static ssize_t write_open_cnt_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct hl_device *hdev = dev_get_drvdata(dev);
-
- return sprintf(buf, "%d\n", hdev->user_ctx ? 1 : 0);
-}
-
static ssize_t soft_reset_cnt_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -450,18 +348,15 @@ static DEVICE_ATTR_RO(device_type);
static DEVICE_ATTR_RO(fuse_ver);
static DEVICE_ATTR_WO(hard_reset);
static DEVICE_ATTR_RO(hard_reset_cnt);
-static DEVICE_ATTR_RW(high_pll);
static DEVICE_ATTR_RO(infineon_ver);
static DEVICE_ATTR_RW(max_power);
static DEVICE_ATTR_RO(pci_addr);
-static DEVICE_ATTR_RW(pm_mng_profile);
static DEVICE_ATTR_RO(preboot_btl_ver);
static DEVICE_ATTR_WO(soft_reset);
static DEVICE_ATTR_RO(soft_reset_cnt);
static DEVICE_ATTR_RO(status);
static DEVICE_ATTR_RO(thermal_ver);
static DEVICE_ATTR_RO(uboot_ver);
-static DEVICE_ATTR_RO(write_open_cnt);
static struct bin_attribute bin_attr_eeprom = {
.attr = {.name = "eeprom", .mode = (0444)},
@@ -477,18 +372,15 @@ static struct attribute *hl_dev_attrs[] = {
&dev_attr_fuse_ver.attr,
&dev_attr_hard_reset.attr,
&dev_attr_hard_reset_cnt.attr,
- &dev_attr_high_pll.attr,
&dev_attr_infineon_ver.attr,
&dev_attr_max_power.attr,
&dev_attr_pci_addr.attr,
- &dev_attr_pm_mng_profile.attr,
&dev_attr_preboot_btl_ver.attr,
&dev_attr_soft_reset.attr,
&dev_attr_soft_reset_cnt.attr,
&dev_attr_status.attr,
&dev_attr_thermal_ver.attr,
&dev_attr_uboot_ver.attr,
- &dev_attr_write_open_cnt.attr,
NULL,
};
diff --git a/drivers/misc/lkdtm/Makefile b/drivers/misc/lkdtm/Makefile
index fb10eafe9bde..c70b3822013f 100644
--- a/drivers/misc/lkdtm/Makefile
+++ b/drivers/misc/lkdtm/Makefile
@@ -9,6 +9,7 @@ lkdtm-$(CONFIG_LKDTM) += refcount.o
lkdtm-$(CONFIG_LKDTM) += rodata_objcopy.o
lkdtm-$(CONFIG_LKDTM) += usercopy.o
lkdtm-$(CONFIG_LKDTM) += stackleak.o
+lkdtm-$(CONFIG_LKDTM) += cfi.o
KASAN_SANITIZE_stackleak.o := n
KCOV_INSTRUMENT_rodata.o := n
diff --git a/drivers/misc/lkdtm/bugs.c b/drivers/misc/lkdtm/bugs.c
index 24245ccdba72..7284a22b1a09 100644
--- a/drivers/misc/lkdtm/bugs.c
+++ b/drivers/misc/lkdtm/bugs.c
@@ -75,7 +75,12 @@ static int warn_counter;
void lkdtm_WARNING(void)
{
- WARN(1, "Warning message trigger count: %d\n", warn_counter++);
+ WARN_ON(++warn_counter);
+}
+
+void lkdtm_WARNING_MESSAGE(void)
+{
+ WARN(1, "Warning message trigger count: %d\n", ++warn_counter);
}
void lkdtm_EXCEPTION(void)
diff --git a/drivers/misc/lkdtm/cfi.c b/drivers/misc/lkdtm/cfi.c
new file mode 100644
index 000000000000..e73ebdbfa806
--- /dev/null
+++ b/drivers/misc/lkdtm/cfi.c
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This is for all the tests relating directly to Control Flow Integrity.
+ */
+#include "lkdtm.h"
+
+static int called_count;
+
+/* Function taking one argument, without a return value. */
+static noinline void lkdtm_increment_void(int *counter)
+{
+ (*counter)++;
+}
+
+/* Function taking one argument, returning int. */
+static noinline int lkdtm_increment_int(int *counter)
+{
+ (*counter)++;
+
+ return *counter;
+}
+/*
+ * This tries to call an indirect function with a mismatched prototype.
+ */
+void lkdtm_CFI_FORWARD_PROTO(void)
+{
+ /*
+ * Matches lkdtm_increment_void()'s prototype, but not
+ * lkdtm_increment_int()'s prototype.
+ */
+ void (*func)(int *);
+
+ pr_info("Calling matched prototype ...\n");
+ func = lkdtm_increment_void;
+ func(&called_count);
+
+ pr_info("Calling mismatched prototype ...\n");
+ func = (void *)lkdtm_increment_int;
+ func(&called_count);
+
+ pr_info("Fail: survived mismatched prototype function call!\n");
+}
diff --git a/drivers/misc/lkdtm/core.c b/drivers/misc/lkdtm/core.c
index 66ae6b2a6950..cbc4c9045a99 100644
--- a/drivers/misc/lkdtm/core.c
+++ b/drivers/misc/lkdtm/core.c
@@ -104,6 +104,7 @@ static const struct crashtype crashtypes[] = {
CRASHTYPE(PANIC),
CRASHTYPE(BUG),
CRASHTYPE(WARNING),
+ CRASHTYPE(WARNING_MESSAGE),
CRASHTYPE(EXCEPTION),
CRASHTYPE(LOOP),
CRASHTYPE(EXHAUST_STACK),
@@ -169,6 +170,7 @@ static const struct crashtype crashtypes[] = {
CRASHTYPE(USERCOPY_KERNEL),
CRASHTYPE(USERCOPY_KERNEL_DS),
CRASHTYPE(STACKLEAK_ERASING),
+ CRASHTYPE(CFI_FORWARD_PROTO),
};
diff --git a/drivers/misc/lkdtm/lkdtm.h b/drivers/misc/lkdtm/lkdtm.h
index 6a284a87a037..ab446e0bde97 100644
--- a/drivers/misc/lkdtm/lkdtm.h
+++ b/drivers/misc/lkdtm/lkdtm.h
@@ -11,6 +11,7 @@ void __init lkdtm_bugs_init(int *recur_param);
void lkdtm_PANIC(void);
void lkdtm_BUG(void);
void lkdtm_WARNING(void);
+void lkdtm_WARNING_MESSAGE(void);
void lkdtm_EXCEPTION(void);
void lkdtm_LOOP(void);
void lkdtm_EXHAUST_STACK(void);
@@ -95,4 +96,7 @@ void lkdtm_USERCOPY_KERNEL_DS(void);
/* lkdtm_stackleak.c */
void lkdtm_STACKLEAK_ERASING(void);
+/* cfi.c */
+void lkdtm_CFI_FORWARD_PROTO(void);
+
#endif
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index 541538eff8b1..d5a92c6eadb3 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -383,12 +383,11 @@ static int mei_me_pci_resume(struct device *device)
#ifdef CONFIG_PM
static int mei_me_pm_runtime_idle(struct device *device)
{
- struct pci_dev *pdev = to_pci_dev(device);
struct mei_device *dev;
- dev_dbg(&pdev->dev, "rpm: me: runtime_idle\n");
+ dev_dbg(device, "rpm: me: runtime_idle\n");
- dev = pci_get_drvdata(pdev);
+ dev = dev_get_drvdata(device);
if (!dev)
return -ENODEV;
if (mei_write_is_idle(dev))
@@ -399,13 +398,12 @@ static int mei_me_pm_runtime_idle(struct device *device)
static int mei_me_pm_runtime_suspend(struct device *device)
{
- struct pci_dev *pdev = to_pci_dev(device);
struct mei_device *dev;
int ret;
- dev_dbg(&pdev->dev, "rpm: me: runtime suspend\n");
+ dev_dbg(device, "rpm: me: runtime suspend\n");
- dev = pci_get_drvdata(pdev);
+ dev = dev_get_drvdata(device);
if (!dev)
return -ENODEV;
@@ -418,7 +416,7 @@ static int mei_me_pm_runtime_suspend(struct device *device)
mutex_unlock(&dev->device_lock);
- dev_dbg(&pdev->dev, "rpm: me: runtime suspend ret=%d\n", ret);
+ dev_dbg(device, "rpm: me: runtime suspend ret=%d\n", ret);
if (ret && ret != -EAGAIN)
schedule_work(&dev->reset_work);
@@ -428,13 +426,12 @@ static int mei_me_pm_runtime_suspend(struct device *device)
static int mei_me_pm_runtime_resume(struct device *device)
{
- struct pci_dev *pdev = to_pci_dev(device);
struct mei_device *dev;
int ret;
- dev_dbg(&pdev->dev, "rpm: me: runtime resume\n");
+ dev_dbg(device, "rpm: me: runtime resume\n");
- dev = pci_get_drvdata(pdev);
+ dev = dev_get_drvdata(device);
if (!dev)
return -ENODEV;
@@ -444,7 +441,7 @@ static int mei_me_pm_runtime_resume(struct device *device)
mutex_unlock(&dev->device_lock);
- dev_dbg(&pdev->dev, "rpm: me: runtime resume ret = %d\n", ret);
+ dev_dbg(device, "rpm: me: runtime resume ret = %d\n", ret);
if (ret)
schedule_work(&dev->reset_work);
diff --git a/drivers/misc/mei/pci-txe.c b/drivers/misc/mei/pci-txe.c
index 2e37fc2e0fa8..f1c16a587495 100644
--- a/drivers/misc/mei/pci-txe.c
+++ b/drivers/misc/mei/pci-txe.c
@@ -276,12 +276,11 @@ static int mei_txe_pci_resume(struct device *device)
#ifdef CONFIG_PM
static int mei_txe_pm_runtime_idle(struct device *device)
{
- struct pci_dev *pdev = to_pci_dev(device);
struct mei_device *dev;
- dev_dbg(&pdev->dev, "rpm: txe: runtime_idle\n");
+ dev_dbg(device, "rpm: txe: runtime_idle\n");
- dev = pci_get_drvdata(pdev);
+ dev = dev_get_drvdata(device);
if (!dev)
return -ENODEV;
if (mei_write_is_idle(dev))
@@ -291,13 +290,12 @@ static int mei_txe_pm_runtime_idle(struct device *device)
}
static int mei_txe_pm_runtime_suspend(struct device *device)
{
- struct pci_dev *pdev = to_pci_dev(device);
struct mei_device *dev;
int ret;
- dev_dbg(&pdev->dev, "rpm: txe: runtime suspend\n");
+ dev_dbg(device, "rpm: txe: runtime suspend\n");
- dev = pci_get_drvdata(pdev);
+ dev = dev_get_drvdata(device);
if (!dev)
return -ENODEV;
@@ -310,7 +308,7 @@ static int mei_txe_pm_runtime_suspend(struct device *device)
/* keep irq on we are staying in D0 */
- dev_dbg(&pdev->dev, "rpm: txe: runtime suspend ret=%d\n", ret);
+ dev_dbg(device, "rpm: txe: runtime suspend ret=%d\n", ret);
mutex_unlock(&dev->device_lock);
@@ -322,13 +320,12 @@ static int mei_txe_pm_runtime_suspend(struct device *device)
static int mei_txe_pm_runtime_resume(struct device *device)
{
- struct pci_dev *pdev = to_pci_dev(device);
struct mei_device *dev;
int ret;
- dev_dbg(&pdev->dev, "rpm: txe: runtime resume\n");
+ dev_dbg(device, "rpm: txe: runtime resume\n");
- dev = pci_get_drvdata(pdev);
+ dev = dev_get_drvdata(device);
if (!dev)
return -ENODEV;
@@ -340,7 +337,7 @@ static int mei_txe_pm_runtime_resume(struct device *device)
mutex_unlock(&dev->device_lock);
- dev_dbg(&pdev->dev, "rpm: txe: runtime resume ret = %d\n", ret);
+ dev_dbg(device, "rpm: txe: runtime resume ret = %d\n", ret);
if (ret)
schedule_work(&dev->reset_work);
diff --git a/drivers/misc/mic/card/mic_x100.c b/drivers/misc/mic/card/mic_x100.c
index 266ffb6f6c44..c8bff2916d3d 100644
--- a/drivers/misc/mic/card/mic_x100.c
+++ b/drivers/misc/mic/card/mic_x100.c
@@ -237,6 +237,9 @@ static int __init mic_probe(struct platform_device *pdev)
mdrv->dev = &pdev->dev;
snprintf(mdrv->name, sizeof(mic_driver_name), mic_driver_name);
+ /* FIXME: use dma_set_mask_and_coherent() and check result */
+ dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+
mdev->mmio.pa = MIC_X100_MMIO_BASE;
mdev->mmio.len = MIC_X100_MMIO_LEN;
mdev->mmio.va = devm_ioremap(&pdev->dev, MIC_X100_MMIO_BASE,
@@ -282,18 +285,6 @@ static void mic_platform_shutdown(struct platform_device *pdev)
mic_remove(pdev);
}
-static u64 mic_dma_mask = DMA_BIT_MASK(64);
-
-static struct platform_device mic_platform_dev = {
- .name = mic_driver_name,
- .id = 0,
- .num_resources = 0,
- .dev = {
- .dma_mask = &mic_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(64),
- },
-};
-
static struct platform_driver __refdata mic_platform_driver = {
.probe = mic_probe,
.remove = mic_remove,
@@ -303,6 +294,8 @@ static struct platform_driver __refdata mic_platform_driver = {
},
};
+static struct platform_device *mic_platform_dev;
+
static int __init mic_init(void)
{
int ret;
@@ -316,9 +309,12 @@ static int __init mic_init(void)
request_module("mic_x100_dma");
mic_init_card_debugfs();
- ret = platform_device_register(&mic_platform_dev);
+
+ mic_platform_dev = platform_device_register_simple(mic_driver_name,
+ 0, NULL, 0);
+ ret = PTR_ERR_OR_ZERO(mic_platform_dev);
if (ret) {
- pr_err("platform_device_register ret %d\n", ret);
+ pr_err("platform_device_register_full ret %d\n", ret);
goto cleanup_debugfs;
}
ret = platform_driver_register(&mic_platform_driver);
@@ -329,7 +325,7 @@ static int __init mic_init(void)
return ret;
device_unregister:
- platform_device_unregister(&mic_platform_dev);
+ platform_device_unregister(mic_platform_dev);
cleanup_debugfs:
mic_exit_card_debugfs();
done:
@@ -339,7 +335,7 @@ done:
static void __exit mic_exit(void)
{
platform_driver_unregister(&mic_platform_driver);
- platform_device_unregister(&mic_platform_dev);
+ platform_device_unregister(mic_platform_dev);
mic_exit_card_debugfs();
}
diff --git a/drivers/misc/mic/scif/scif_epd.h b/drivers/misc/mic/scif/scif_epd.h
index d3837f8a5ba0..0b9dfe1cc06c 100644
--- a/drivers/misc/mic/scif/scif_epd.h
+++ b/drivers/misc/mic/scif/scif_epd.h
@@ -156,9 +156,8 @@ static inline int scif_verify_epd(struct scif_endpt *ep)
static inline int scif_anon_inode_getfile(scif_epd_t epd)
{
epd->anon = anon_inode_getfile("scif", &scif_anon_fops, NULL, 0);
- if (IS_ERR(epd->anon))
- return PTR_ERR(epd->anon);
- return 0;
+
+ return PTR_ERR_OR_ZERO(epd->anon);
}
static inline void scif_anon_inode_fput(scif_epd_t epd)
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index 09e24659ef3d..98c60f11b76b 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -696,7 +696,7 @@ again:
if (gru_mq_desc == NULL) {
gru_mq_desc = kmalloc(sizeof(struct
gru_message_queue_desc),
- GFP_KERNEL);
+ GFP_ATOMIC);
if (gru_mq_desc == NULL) {
ret = xpNoMemory;
goto done;
@@ -1680,7 +1680,7 @@ xpc_received_payload_uv(struct xpc_channel *ch, void *payload)
XPC_DEACTIVATE_PARTITION(&xpc_partitions[ch->partid], ret);
}
-static struct xpc_arch_operations xpc_arch_ops_uv = {
+static const struct xpc_arch_operations xpc_arch_ops_uv = {
.setup_partitions = xpc_setup_partitions_uv,
.teardown_partitions = xpc_teardown_partitions_uv,
.process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_uv,
diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c
deleted file mode 100644
index ee120dcbb3e6..000000000000
--- a/drivers/misc/spear13xx_pcie_gadget.c
+++ /dev/null
@@ -1,797 +0,0 @@
-/*
- * drivers/misc/spear13xx_pcie_gadget.c
- *
- * Copyright (C) 2010 ST Microelectronics
- * Pratyush Anand<pratyush.anand@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/pci_regs.h>
-#include <linux/configfs.h>
-#include <mach/pcie.h>
-#include <mach/misc_regs.h>
-
-#define IN0_MEM_SIZE (200 * 1024 * 1024 - 1)
-/* In current implementation address translation is done using IN0 only.
- * So IN1 start address and IN0 end address has been kept same
-*/
-#define IN1_MEM_SIZE (0 * 1024 * 1024 - 1)
-#define IN_IO_SIZE (20 * 1024 * 1024 - 1)
-#define IN_CFG0_SIZE (12 * 1024 * 1024 - 1)
-#define IN_CFG1_SIZE (12 * 1024 * 1024 - 1)
-#define IN_MSG_SIZE (12 * 1024 * 1024 - 1)
-/* Keep default BAR size as 4K*/
-/* AORAM would be mapped by default*/
-#define INBOUND_ADDR_MASK (SPEAR13XX_SYSRAM1_SIZE - 1)
-
-#define INT_TYPE_NO_INT 0
-#define INT_TYPE_INTX 1
-#define INT_TYPE_MSI 2
-struct spear_pcie_gadget_config {
- void __iomem *base;
- void __iomem *va_app_base;
- void __iomem *va_dbi_base;
- char int_type[10];
- ulong requested_msi;
- ulong configured_msi;
- ulong bar0_size;
- ulong bar0_rw_offset;
- void __iomem *va_bar0_address;
-};
-
-struct pcie_gadget_target {
- struct configfs_subsystem subsys;
- struct spear_pcie_gadget_config config;
-};
-
-struct pcie_gadget_target_attr {
- struct configfs_attribute attr;
- ssize_t (*show)(struct spear_pcie_gadget_config *config,
- char *buf);
- ssize_t (*store)(struct spear_pcie_gadget_config *config,
- const char *buf,
- size_t count);
-};
-
-static void enable_dbi_access(struct pcie_app_reg __iomem *app_reg)
-{
- /* Enable DBI access */
- writel(readl(&app_reg->slv_armisc) | (1 << AXI_OP_DBI_ACCESS_ID),
- &app_reg->slv_armisc);
- writel(readl(&app_reg->slv_awmisc) | (1 << AXI_OP_DBI_ACCESS_ID),
- &app_reg->slv_awmisc);
-
-}
-
-static void disable_dbi_access(struct pcie_app_reg __iomem *app_reg)
-{
- /* disable DBI access */
- writel(readl(&app_reg->slv_armisc) & ~(1 << AXI_OP_DBI_ACCESS_ID),
- &app_reg->slv_armisc);
- writel(readl(&app_reg->slv_awmisc) & ~(1 << AXI_OP_DBI_ACCESS_ID),
- &app_reg->slv_awmisc);
-
-}
-
-static void spear_dbi_read_reg(struct spear_pcie_gadget_config *config,
- int where, int size, u32 *val)
-{
- struct pcie_app_reg __iomem *app_reg = config->va_app_base;
- ulong va_address;
-
- /* Enable DBI access */
- enable_dbi_access(app_reg);
-
- va_address = (ulong)config->va_dbi_base + (where & ~0x3);
-
- *val = readl(va_address);
-
- if (size == 1)
- *val = (*val >> (8 * (where & 3))) & 0xff;
- else if (size == 2)
- *val = (*val >> (8 * (where & 3))) & 0xffff;
-
- /* Disable DBI access */
- disable_dbi_access(app_reg);
-}
-
-static void spear_dbi_write_reg(struct spear_pcie_gadget_config *config,
- int where, int size, u32 val)
-{
- struct pcie_app_reg __iomem *app_reg = config->va_app_base;
- ulong va_address;
-
- /* Enable DBI access */
- enable_dbi_access(app_reg);
-
- va_address = (ulong)config->va_dbi_base + (where & ~0x3);
-
- if (size == 4)
- writel(val, va_address);
- else if (size == 2)
- writew(val, va_address + (where & 2));
- else if (size == 1)
- writeb(val, va_address + (where & 3));
-
- /* Disable DBI access */
- disable_dbi_access(app_reg);
-}
-
-#define PCI_FIND_CAP_TTL 48
-
-static int pci_find_own_next_cap_ttl(struct spear_pcie_gadget_config *config,
- u32 pos, int cap, int *ttl)
-{
- u32 id;
-
- while ((*ttl)--) {
- spear_dbi_read_reg(config, pos, 1, &pos);
- if (pos < 0x40)
- break;
- pos &= ~3;
- spear_dbi_read_reg(config, pos + PCI_CAP_LIST_ID, 1, &id);
- if (id == 0xff)
- break;
- if (id == cap)
- return pos;
- pos += PCI_CAP_LIST_NEXT;
- }
- return 0;
-}
-
-static int pci_find_own_next_cap(struct spear_pcie_gadget_config *config,
- u32 pos, int cap)
-{
- int ttl = PCI_FIND_CAP_TTL;
-
- return pci_find_own_next_cap_ttl(config, pos, cap, &ttl);
-}
-
-static int pci_find_own_cap_start(struct spear_pcie_gadget_config *config,
- u8 hdr_type)
-{
- u32 status;
-
- spear_dbi_read_reg(config, PCI_STATUS, 2, &status);
- if (!(status & PCI_STATUS_CAP_LIST))
- return 0;
-
- switch (hdr_type) {
- case PCI_HEADER_TYPE_NORMAL:
- case PCI_HEADER_TYPE_BRIDGE:
- return PCI_CAPABILITY_LIST;
- case PCI_HEADER_TYPE_CARDBUS:
- return PCI_CB_CAPABILITY_LIST;
- default:
- return 0;
- }
-
- return 0;
-}
-
-/*
- * Tell if a device supports a given PCI capability.
- * Returns the address of the requested capability structure within the
- * device's PCI configuration space or 0 in case the device does not
- * support it. Possible values for @cap:
- *
- * %PCI_CAP_ID_PM Power Management
- * %PCI_CAP_ID_AGP Accelerated Graphics Port
- * %PCI_CAP_ID_VPD Vital Product Data
- * %PCI_CAP_ID_SLOTID Slot Identification
- * %PCI_CAP_ID_MSI Message Signalled Interrupts
- * %PCI_CAP_ID_CHSWP CompactPCI HotSwap
- * %PCI_CAP_ID_PCIX PCI-X
- * %PCI_CAP_ID_EXP PCI Express
- */
-static int pci_find_own_capability(struct spear_pcie_gadget_config *config,
- int cap)
-{
- u32 pos;
- u32 hdr_type;
-
- spear_dbi_read_reg(config, PCI_HEADER_TYPE, 1, &hdr_type);
-
- pos = pci_find_own_cap_start(config, hdr_type);
- if (pos)
- pos = pci_find_own_next_cap(config, pos, cap);
-
- return pos;
-}
-
-static irqreturn_t spear_pcie_gadget_irq(int irq, void *dev_id)
-{
- return 0;
-}
-
-/*
- * configfs interfaces show/store functions
- */
-
-static struct pcie_gadget_target *to_target(struct config_item *item)
-{
- return item ?
- container_of(to_configfs_subsystem(to_config_group(item)),
- struct pcie_gadget_target, subsys) : NULL;
-}
-
-static ssize_t pcie_gadget_link_show(struct config_item *item, char *buf)
-{
- struct pcie_app_reg __iomem *app_reg = to_target(item)->va_app_base;
-
- if (readl(&app_reg->app_status_1) & ((u32)1 << XMLH_LINK_UP_ID))
- return sprintf(buf, "UP");
- else
- return sprintf(buf, "DOWN");
-}
-
-static ssize_t pcie_gadget_link_store(struct config_item *item,
- const char *buf, size_t count)
-{
- struct pcie_app_reg __iomem *app_reg = to_target(item)->va_app_base;
-
- if (sysfs_streq(buf, "UP"))
- writel(readl(&app_reg->app_ctrl_0) | (1 << APP_LTSSM_ENABLE_ID),
- &app_reg->app_ctrl_0);
- else if (sysfs_streq(buf, "DOWN"))
- writel(readl(&app_reg->app_ctrl_0)
- & ~(1 << APP_LTSSM_ENABLE_ID),
- &app_reg->app_ctrl_0);
- else
- return -EINVAL;
- return count;
-}
-
-static ssize_t pcie_gadget_int_type_show(struct config_item *item, char *buf)
-{
- return sprintf(buf, "%s", to_target(item)->int_type);
-}
-
-static ssize_t pcie_gadget_int_type_store(struct config_item *item,
- const char *buf, size_t count)
-{
- struct spear_pcie_gadget_config *config = to_target(item)
- u32 cap, vec, flags;
- ulong vector;
-
- if (sysfs_streq(buf, "INTA"))
- spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1);
-
- else if (sysfs_streq(buf, "MSI")) {
- vector = config->requested_msi;
- vec = 0;
- while (vector > 1) {
- vector /= 2;
- vec++;
- }
- spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 0);
- cap = pci_find_own_capability(config, PCI_CAP_ID_MSI);
- spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags);
- flags &= ~PCI_MSI_FLAGS_QMASK;
- flags |= vec << 1;
- spear_dbi_write_reg(config, cap + PCI_MSI_FLAGS, 1, flags);
- } else
- return -EINVAL;
-
- strcpy(config->int_type, buf);
-
- return count;
-}
-
-static ssize_t pcie_gadget_no_of_msi_show(struct config_item *item, char *buf)
-{
- struct spear_pcie_gadget_config *config = to_target(item)
- struct pcie_app_reg __iomem *app_reg = to_target(item)->va_app_base;
- u32 cap, vec, flags;
- ulong vector;
-
- if ((readl(&app_reg->msg_status) & (1 << CFG_MSI_EN_ID))
- != (1 << CFG_MSI_EN_ID))
- vector = 0;
- else {
- cap = pci_find_own_capability(config, PCI_CAP_ID_MSI);
- spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags);
- flags &= ~PCI_MSI_FLAGS_QSIZE;
- vec = flags >> 4;
- vector = 1;
- while (vec--)
- vector *= 2;
- }
- config->configured_msi = vector;
-
- return sprintf(buf, "%lu", vector);
-}
-
-static ssize_t pcie_gadget_no_of_msi_store(struct config_item *item,
- const char *buf, size_t count)
-{
- int ret;
-
- ret = kstrtoul(buf, 0, &to_target(item)->requested_msi);
- if (ret)
- return ret;
-
- if (config->requested_msi > 32)
- config->requested_msi = 32;
-
- return count;
-}
-
-static ssize_t pcie_gadget_inta_store(struct config_item *item,
- const char *buf, size_t count)
-{
- struct pcie_app_reg __iomem *app_reg = to_target(item)->va_app_base;
- ulong en;
- int ret;
-
- ret = kstrtoul(buf, 0, &en);
- if (ret)
- return ret;
-
- if (en)
- writel(readl(&app_reg->app_ctrl_0) | (1 << SYS_INT_ID),
- &app_reg->app_ctrl_0);
- else
- writel(readl(&app_reg->app_ctrl_0) & ~(1 << SYS_INT_ID),
- &app_reg->app_ctrl_0);
-
- return count;
-}
-
-static ssize_t pcie_gadget_send_msi_store(struct config_item *item,
- const char *buf, size_t count)
-{
- struct spear_pcie_gadget_config *config = to_target(item)
- struct pcie_app_reg __iomem *app_reg = config->va_app_base;
- ulong vector;
- u32 ven_msi;
- int ret;
-
- ret = kstrtoul(buf, 0, &vector);
- if (ret)
- return ret;
-
- if (!config->configured_msi)
- return -EINVAL;
-
- if (vector >= config->configured_msi)
- return -EINVAL;
-
- ven_msi = readl(&app_reg->ven_msi_1);
- ven_msi &= ~VEN_MSI_FUN_NUM_MASK;
- ven_msi |= 0 << VEN_MSI_FUN_NUM_ID;
- ven_msi &= ~VEN_MSI_TC_MASK;
- ven_msi |= 0 << VEN_MSI_TC_ID;
- ven_msi &= ~VEN_MSI_VECTOR_MASK;
- ven_msi |= vector << VEN_MSI_VECTOR_ID;
-
- /* generating interrupt for msi vector */
- ven_msi |= VEN_MSI_REQ_EN;
- writel(ven_msi, &app_reg->ven_msi_1);
- udelay(1);
- ven_msi &= ~VEN_MSI_REQ_EN;
- writel(ven_msi, &app_reg->ven_msi_1);
-
- return count;
-}
-
-static ssize_t pcie_gadget_vendor_id_show(struct config_item *item, char *buf)
-{
- u32 id;
-
- spear_dbi_read_reg(to_target(item), PCI_VENDOR_ID, 2, &id);
-
- return sprintf(buf, "%x", id);
-}
-
-static ssize_t pcie_gadget_vendor_id_store(struct config_item *item,
- const char *buf, size_t count)
-{
- ulong id;
- int ret;
-
- ret = kstrtoul(buf, 0, &id);
- if (ret)
- return ret;
-
- spear_dbi_write_reg(to_target(item), PCI_VENDOR_ID, 2, id);
-
- return count;
-}
-
-static ssize_t pcie_gadget_device_id_show(struct config_item *item, char *buf)
-{
- u32 id;
-
- spear_dbi_read_reg(to_target(item), PCI_DEVICE_ID, 2, &id);
-
- return sprintf(buf, "%x", id);
-}
-
-static ssize_t pcie_gadget_device_id_store(struct config_item *item,
- const char *buf, size_t count)
-{
- ulong id;
- int ret;
-
- ret = kstrtoul(buf, 0, &id);
- if (ret)
- return ret;
-
- spear_dbi_write_reg(to_target(item), PCI_DEVICE_ID, 2, id);
-
- return count;
-}
-
-static ssize_t pcie_gadget_bar0_size_show(struct config_item *item, char *buf)
-{
- return sprintf(buf, "%lx", to_target(item)->bar0_size);
-}
-
-static ssize_t pcie_gadget_bar0_size_store(struct config_item *item,
- const char *buf, size_t count)
-{
- struct spear_pcie_gadget_config *config = to_target(item)
- ulong size;
- u32 pos, pos1;
- u32 no_of_bit = 0;
- int ret;
-
- ret = kstrtoul(buf, 0, &size);
- if (ret)
- return ret;
-
- /* min bar size is 256 */
- if (size <= 0x100)
- size = 0x100;
- /* max bar size is 1MB*/
- else if (size >= 0x100000)
- size = 0x100000;
- else {
- pos = 0;
- pos1 = 0;
- while (pos < 21) {
- pos = find_next_bit((ulong *)&size, 21, pos);
- if (pos != 21)
- pos1 = pos + 1;
- pos++;
- no_of_bit++;
- }
- if (no_of_bit == 2)
- pos1--;
-
- size = 1 << pos1;
- }
- config->bar0_size = size;
- spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, size - 1);
-
- return count;
-}
-
-static ssize_t pcie_gadget_bar0_address_show(struct config_item *item,
- char *buf)
-{
- struct pcie_app_reg __iomem *app_reg = to_target(item)->va_app_base;
-
- u32 address = readl(&app_reg->pim0_mem_addr_start);
-
- return sprintf(buf, "%x", address);
-}
-
-static ssize_t pcie_gadget_bar0_address_store(struct config_item *item,
- const char *buf, size_t count)
-{
- struct spear_pcie_gadget_config *config = to_target(item)
- struct pcie_app_reg __iomem *app_reg = config->va_app_base;
- ulong address;
- int ret;
-
- ret = kstrtoul(buf, 0, &address);
- if (ret)
- return ret;
-
- address &= ~(config->bar0_size - 1);
- if (config->va_bar0_address)
- iounmap(config->va_bar0_address);
- config->va_bar0_address = ioremap(address, config->bar0_size);
- if (!config->va_bar0_address)
- return -ENOMEM;
-
- writel(address, &app_reg->pim0_mem_addr_start);
-
- return count;
-}
-
-static ssize_t pcie_gadget_bar0_rw_offset_show(struct config_item *item,
- char *buf)
-{
- return sprintf(buf, "%lx", to_target(item)->bar0_rw_offset);
-}
-
-static ssize_t pcie_gadget_bar0_rw_offset_store(struct config_item *item,
- const char *buf, size_t count)
-{
- ulong offset;
- int ret;
-
- ret = kstrtoul(buf, 0, &offset);
- if (ret)
- return ret;
-
- if (offset % 4)
- return -EINVAL;
-
- to_target(item)->bar0_rw_offset = offset;
-
- return count;
-}
-
-static ssize_t pcie_gadget_bar0_data_show(struct config_item *item, char *buf)
-{
- struct spear_pcie_gadget_config *config = to_target(item)
- ulong data;
-
- if (!config->va_bar0_address)
- return -ENOMEM;
-
- data = readl((ulong)config->va_bar0_address + config->bar0_rw_offset);
-
- return sprintf(buf, "%lx", data);
-}
-
-static ssize_t pcie_gadget_bar0_data_store(struct config_item *item,
- const char *buf, size_t count)
-{
- struct spear_pcie_gadget_config *config = to_target(item)
- ulong data;
- int ret;
-
- ret = kstrtoul(buf, 0, &data);
- if (ret)
- return ret;
-
- if (!config->va_bar0_address)
- return -ENOMEM;
-
- writel(data, (ulong)config->va_bar0_address + config->bar0_rw_offset);
-
- return count;
-}
-
-CONFIGFS_ATTR(pcie_gadget_, link);
-CONFIGFS_ATTR(pcie_gadget_, int_type);
-CONFIGFS_ATTR(pcie_gadget_, no_of_msi);
-CONFIGFS_ATTR_WO(pcie_gadget_, inta);
-CONFIGFS_ATTR_WO(pcie_gadget_, send_msi);
-CONFIGFS_ATTR(pcie_gadget_, vendor_id);
-CONFIGFS_ATTR(pcie_gadget_, device_id);
-CONFIGFS_ATTR(pcie_gadget_, bar0_size);
-CONFIGFS_ATTR(pcie_gadget_, bar0_address);
-CONFIGFS_ATTR(pcie_gadget_, bar0_rw_offset);
-CONFIGFS_ATTR(pcie_gadget_, bar0_data);
-
-static struct configfs_attribute *pcie_gadget_target_attrs[] = {
- &pcie_gadget_attr_link,
- &pcie_gadget_attr_int_type,
- &pcie_gadget_attr_no_of_msi,
- &pcie_gadget_attr_inta,
- &pcie_gadget_attr_send_msi,
- &pcie_gadget_attr_vendor_id,
- &pcie_gadget_attr_device_id,
- &pcie_gadget_attr_bar0_size,
- &pcie_gadget_attr_bar0_address,
- &pcie_gadget_attr_bar0_rw_offset,
- &pcie_gadget_attr_bar0_data,
- NULL,
-};
-
-static struct config_item_type pcie_gadget_target_type = {
- .ct_attrs = pcie_gadget_target_attrs,
- .ct_owner = THIS_MODULE,
-};
-
-static void spear13xx_pcie_device_init(struct spear_pcie_gadget_config *config)
-{
- struct pcie_app_reg __iomem *app_reg = config->va_app_base;
-
- /*setup registers for outbound translation */
-
- writel(config->base, &app_reg->in0_mem_addr_start);
- writel(app_reg->in0_mem_addr_start + IN0_MEM_SIZE,
- &app_reg->in0_mem_addr_limit);
- writel(app_reg->in0_mem_addr_limit + 1, &app_reg->in1_mem_addr_start);
- writel(app_reg->in1_mem_addr_start + IN1_MEM_SIZE,
- &app_reg->in1_mem_addr_limit);
- writel(app_reg->in1_mem_addr_limit + 1, &app_reg->in_io_addr_start);
- writel(app_reg->in_io_addr_start + IN_IO_SIZE,
- &app_reg->in_io_addr_limit);
- writel(app_reg->in_io_addr_limit + 1, &app_reg->in_cfg0_addr_start);
- writel(app_reg->in_cfg0_addr_start + IN_CFG0_SIZE,
- &app_reg->in_cfg0_addr_limit);
- writel(app_reg->in_cfg0_addr_limit + 1, &app_reg->in_cfg1_addr_start);
- writel(app_reg->in_cfg1_addr_start + IN_CFG1_SIZE,
- &app_reg->in_cfg1_addr_limit);
- writel(app_reg->in_cfg1_addr_limit + 1, &app_reg->in_msg_addr_start);
- writel(app_reg->in_msg_addr_start + IN_MSG_SIZE,
- &app_reg->in_msg_addr_limit);
-
- writel(app_reg->in0_mem_addr_start, &app_reg->pom0_mem_addr_start);
- writel(app_reg->in1_mem_addr_start, &app_reg->pom1_mem_addr_start);
- writel(app_reg->in_io_addr_start, &app_reg->pom_io_addr_start);
-
- /*setup registers for inbound translation */
-
- /* Keep AORAM mapped at BAR0 as default */
- config->bar0_size = INBOUND_ADDR_MASK + 1;
- spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, INBOUND_ADDR_MASK);
- spear_dbi_write_reg(config, PCI_BASE_ADDRESS_0, 4, 0xC);
- config->va_bar0_address = ioremap(SPEAR13XX_SYSRAM1_BASE,
- config->bar0_size);
-
- writel(SPEAR13XX_SYSRAM1_BASE, &app_reg->pim0_mem_addr_start);
- writel(0, &app_reg->pim1_mem_addr_start);
- writel(INBOUND_ADDR_MASK + 1, &app_reg->mem0_addr_offset_limit);
-
- writel(0x0, &app_reg->pim_io_addr_start);
- writel(0x0, &app_reg->pim_io_addr_start);
- writel(0x0, &app_reg->pim_rom_addr_start);
-
- writel(DEVICE_TYPE_EP | (1 << MISCTRL_EN_ID)
- | ((u32)1 << REG_TRANSLATION_ENABLE),
- &app_reg->app_ctrl_0);
- /* disable all rx interrupts */
- writel(0, &app_reg->int_mask);
-
- /* Select INTA as default*/
- spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1);
-}
-
-static int spear_pcie_gadget_probe(struct platform_device *pdev)
-{
- struct resource *res0, *res1;
- unsigned int status = 0;
- int irq;
- struct clk *clk;
- static struct pcie_gadget_target *target;
- struct spear_pcie_gadget_config *config;
- struct config_item *cg_item;
- struct configfs_subsystem *subsys;
-
- target = devm_kzalloc(&pdev->dev, sizeof(*target), GFP_KERNEL);
- if (!target) {
- dev_err(&pdev->dev, "out of memory\n");
- return -ENOMEM;
- }
-
- cg_item = &target->subsys.su_group.cg_item;
- sprintf(cg_item->ci_namebuf, "pcie_gadget.%d", pdev->id);
- cg_item->ci_type = &pcie_gadget_target_type;
- config = &target->config;
-
- /* get resource for application registers*/
- res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- config->va_app_base = devm_ioremap_resource(&pdev->dev, res0);
- if (IS_ERR(config->va_app_base)) {
- dev_err(&pdev->dev, "ioremap fail\n");
- return PTR_ERR(config->va_app_base);
- }
-
- /* get resource for dbi registers*/
- res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- config->base = (void __iomem *)res1->start;
-
- config->va_dbi_base = devm_ioremap_resource(&pdev->dev, res1);
- if (IS_ERR(config->va_dbi_base)) {
- dev_err(&pdev->dev, "ioremap fail\n");
- return PTR_ERR(config->va_dbi_base);
- }
-
- platform_set_drvdata(pdev, target);
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(&pdev->dev, "no update irq?\n");
- return irq;
- }
-
- status = devm_request_irq(&pdev->dev, irq, spear_pcie_gadget_irq,
- 0, pdev->name, NULL);
- if (status) {
- dev_err(&pdev->dev,
- "pcie gadget interrupt IRQ%d already claimed\n", irq);
- return status;
- }
-
- /* Register configfs hooks */
- subsys = &target->subsys;
- config_group_init(&subsys->su_group);
- mutex_init(&subsys->su_mutex);
- status = configfs_register_subsystem(subsys);
- if (status)
- return status;
-
- /*
- * init basic pcie application registers
- * do not enable clock if it is PCIE0.Ideally , all controller should
- * have been independent from others with respect to clock. But PCIE1
- * and 2 depends on PCIE0.So PCIE0 clk is provided during board init.
- */
- if (pdev->id == 1) {
- /*
- * Ideally CFG Clock should have been also enabled here. But
- * it is done currently during board init routne
- */
- clk = clk_get_sys("pcie1", NULL);
- if (IS_ERR(clk)) {
- pr_err("%s:couldn't get clk for pcie1\n", __func__);
- return PTR_ERR(clk);
- }
- status = clk_enable(clk);
- if (status) {
- pr_err("%s:couldn't enable clk for pcie1\n", __func__);
- return status;
- }
- } else if (pdev->id == 2) {
- /*
- * Ideally CFG Clock should have been also enabled here. But
- * it is done currently during board init routne
- */
- clk = clk_get_sys("pcie2", NULL);
- if (IS_ERR(clk)) {
- pr_err("%s:couldn't get clk for pcie2\n", __func__);
- return PTR_ERR(clk);
- }
- status = clk_enable(clk);
- if (status) {
- pr_err("%s:couldn't enable clk for pcie2\n", __func__);
- return status;
- }
- }
- spear13xx_pcie_device_init(config);
-
- return 0;
-}
-
-static int spear_pcie_gadget_remove(struct platform_device *pdev)
-{
- static struct pcie_gadget_target *target;
-
- target = platform_get_drvdata(pdev);
-
- configfs_unregister_subsystem(&target->subsys);
-
- return 0;
-}
-
-static void spear_pcie_gadget_shutdown(struct platform_device *pdev)
-{
-}
-
-static struct platform_driver spear_pcie_gadget_driver = {
- .probe = spear_pcie_gadget_probe,
- .remove = spear_pcie_gadget_remove,
- .shutdown = spear_pcie_gadget_shutdown,
- .driver = {
- .name = "pcie-gadget-spear",
- .bus = &platform_bus_type
- },
-};
-
-module_platform_driver(spear_pcie_gadget_driver);
-
-MODULE_ALIAS("platform:pcie-gadget-spear");
-MODULE_AUTHOR("Pratyush Anand");
-MODULE_LICENSE("GPL");
diff --git a/drivers/misc/xilinx_sdfec.c b/drivers/misc/xilinx_sdfec.c
index f257d3812110..11835969e982 100644
--- a/drivers/misc/xilinx_sdfec.c
+++ b/drivers/misc/xilinx_sdfec.c
@@ -19,11 +19,150 @@
#include <linux/poll.h>
#include <linux/slab.h>
#include <linux/clk.h>
+#include <linux/compat.h>
+#include <linux/highmem.h>
+
+#include <uapi/misc/xilinx_sdfec.h>
#define DEV_NAME_LEN 12
-static struct idr dev_idr;
-static struct mutex dev_idr_lock;
+static DEFINE_IDA(dev_nrs);
+
+/* Xilinx SDFEC Register Map */
+/* CODE_WRI_PROTECT Register */
+#define XSDFEC_CODE_WR_PROTECT_ADDR (0x4)
+
+/* ACTIVE Register */
+#define XSDFEC_ACTIVE_ADDR (0x8)
+#define XSDFEC_IS_ACTIVITY_SET (0x1)
+
+/* AXIS_WIDTH Register */
+#define XSDFEC_AXIS_WIDTH_ADDR (0xC)
+#define XSDFEC_AXIS_DOUT_WORDS_LSB (5)
+#define XSDFEC_AXIS_DOUT_WIDTH_LSB (3)
+#define XSDFEC_AXIS_DIN_WORDS_LSB (2)
+#define XSDFEC_AXIS_DIN_WIDTH_LSB (0)
+
+/* AXIS_ENABLE Register */
+#define XSDFEC_AXIS_ENABLE_ADDR (0x10)
+#define XSDFEC_AXIS_OUT_ENABLE_MASK (0x38)
+#define XSDFEC_AXIS_IN_ENABLE_MASK (0x7)
+#define XSDFEC_AXIS_ENABLE_MASK \
+ (XSDFEC_AXIS_OUT_ENABLE_MASK | XSDFEC_AXIS_IN_ENABLE_MASK)
+
+/* FEC_CODE Register */
+#define XSDFEC_FEC_CODE_ADDR (0x14)
+
+/* ORDER Register Map */
+#define XSDFEC_ORDER_ADDR (0x18)
+
+/* Interrupt Status Register */
+#define XSDFEC_ISR_ADDR (0x1C)
+/* Interrupt Status Register Bit Mask */
+#define XSDFEC_ISR_MASK (0x3F)
+
+/* Write Only - Interrupt Enable Register */
+#define XSDFEC_IER_ADDR (0x20)
+/* Write Only - Interrupt Disable Register */
+#define XSDFEC_IDR_ADDR (0x24)
+/* Read Only - Interrupt Mask Register */
+#define XSDFEC_IMR_ADDR (0x28)
+
+/* ECC Interrupt Status Register */
+#define XSDFEC_ECC_ISR_ADDR (0x2C)
+/* Single Bit Errors */
+#define XSDFEC_ECC_ISR_SBE_MASK (0x7FF)
+/* PL Initialize Single Bit Errors */
+#define XSDFEC_PL_INIT_ECC_ISR_SBE_MASK (0x3C00000)
+/* Multi Bit Errors */
+#define XSDFEC_ECC_ISR_MBE_MASK (0x3FF800)
+/* PL Initialize Multi Bit Errors */
+#define XSDFEC_PL_INIT_ECC_ISR_MBE_MASK (0x3C000000)
+/* Multi Bit Error to Event Shift */
+#define XSDFEC_ECC_ISR_MBE_TO_EVENT_SHIFT (11)
+/* PL Initialize Multi Bit Error to Event Shift */
+#define XSDFEC_PL_INIT_ECC_ISR_MBE_TO_EVENT_SHIFT (4)
+/* ECC Interrupt Status Bit Mask */
+#define XSDFEC_ECC_ISR_MASK (XSDFEC_ECC_ISR_SBE_MASK | XSDFEC_ECC_ISR_MBE_MASK)
+/* ECC Interrupt Status PL Initialize Bit Mask */
+#define XSDFEC_PL_INIT_ECC_ISR_MASK \
+ (XSDFEC_PL_INIT_ECC_ISR_SBE_MASK | XSDFEC_PL_INIT_ECC_ISR_MBE_MASK)
+/* ECC Interrupt Status All Bit Mask */
+#define XSDFEC_ALL_ECC_ISR_MASK \
+ (XSDFEC_ECC_ISR_MASK | XSDFEC_PL_INIT_ECC_ISR_MASK)
+/* ECC Interrupt Status Single Bit Errors Mask */
+#define XSDFEC_ALL_ECC_ISR_SBE_MASK \
+ (XSDFEC_ECC_ISR_SBE_MASK | XSDFEC_PL_INIT_ECC_ISR_SBE_MASK)
+/* ECC Interrupt Status Multi Bit Errors Mask */
+#define XSDFEC_ALL_ECC_ISR_MBE_MASK \
+ (XSDFEC_ECC_ISR_MBE_MASK | XSDFEC_PL_INIT_ECC_ISR_MBE_MASK)
+
+/* Write Only - ECC Interrupt Enable Register */
+#define XSDFEC_ECC_IER_ADDR (0x30)
+/* Write Only - ECC Interrupt Disable Register */
+#define XSDFEC_ECC_IDR_ADDR (0x34)
+/* Read Only - ECC Interrupt Mask Register */
+#define XSDFEC_ECC_IMR_ADDR (0x38)
+
+/* BYPASS Register */
+#define XSDFEC_BYPASS_ADDR (0x3C)
+
+/* Turbo Code Register */
+#define XSDFEC_TURBO_ADDR (0x100)
+#define XSDFEC_TURBO_SCALE_MASK (0xFFF)
+#define XSDFEC_TURBO_SCALE_BIT_POS (8)
+#define XSDFEC_TURBO_SCALE_MAX (15)
+
+/* REG0 Register */
+#define XSDFEC_LDPC_CODE_REG0_ADDR_BASE (0x2000)
+#define XSDFEC_LDPC_CODE_REG0_ADDR_HIGH (0x27F0)
+#define XSDFEC_REG0_N_MIN (4)
+#define XSDFEC_REG0_N_MAX (32768)
+#define XSDFEC_REG0_N_MUL_P (256)
+#define XSDFEC_REG0_N_LSB (0)
+#define XSDFEC_REG0_K_MIN (2)
+#define XSDFEC_REG0_K_MAX (32766)
+#define XSDFEC_REG0_K_MUL_P (256)
+#define XSDFEC_REG0_K_LSB (16)
+
+/* REG1 Register */
+#define XSDFEC_LDPC_CODE_REG1_ADDR_BASE (0x2004)
+#define XSDFEC_LDPC_CODE_REG1_ADDR_HIGH (0x27f4)
+#define XSDFEC_REG1_PSIZE_MIN (2)
+#define XSDFEC_REG1_PSIZE_MAX (512)
+#define XSDFEC_REG1_NO_PACKING_MASK (0x400)
+#define XSDFEC_REG1_NO_PACKING_LSB (10)
+#define XSDFEC_REG1_NM_MASK (0xFF800)
+#define XSDFEC_REG1_NM_LSB (11)
+#define XSDFEC_REG1_BYPASS_MASK (0x100000)
+
+/* REG2 Register */
+#define XSDFEC_LDPC_CODE_REG2_ADDR_BASE (0x2008)
+#define XSDFEC_LDPC_CODE_REG2_ADDR_HIGH (0x27f8)
+#define XSDFEC_REG2_NLAYERS_MIN (1)
+#define XSDFEC_REG2_NLAYERS_MAX (256)
+#define XSDFEC_REG2_NNMQC_MASK (0xFFE00)
+#define XSDFEC_REG2_NMQC_LSB (9)
+#define XSDFEC_REG2_NORM_TYPE_MASK (0x100000)
+#define XSDFEC_REG2_NORM_TYPE_LSB (20)
+#define XSDFEC_REG2_SPECIAL_QC_MASK (0x200000)
+#define XSDFEC_REG2_SPEICAL_QC_LSB (21)
+#define XSDFEC_REG2_NO_FINAL_PARITY_MASK (0x400000)
+#define XSDFEC_REG2_NO_FINAL_PARITY_LSB (22)
+#define XSDFEC_REG2_MAX_SCHEDULE_MASK (0x1800000)
+#define XSDFEC_REG2_MAX_SCHEDULE_LSB (23)
+
+/* REG3 Register */
+#define XSDFEC_LDPC_CODE_REG3_ADDR_BASE (0x200C)
+#define XSDFEC_LDPC_CODE_REG3_ADDR_HIGH (0x27FC)
+#define XSDFEC_REG3_LA_OFF_LSB (8)
+#define XSDFEC_REG3_QC_OFF_LSB (16)
+
+#define XSDFEC_LDPC_REG_JUMP (0x10)
+#define XSDFEC_REG_WIDTH_JUMP (4)
+
+/* The maximum number of pinned pages */
+#define MAX_NUM_PAGES ((XSDFEC_QC_TABLE_DEPTH / PAGE_SIZE) + 1)
/**
* struct xsdfec_clks - For managing SD-FEC clocks
@@ -49,31 +188,1043 @@ struct xsdfec_clks {
/**
* struct xsdfec_dev - Driver data for SDFEC
- * @regs: device physical base address
- * @dev: pointer to device struct
* @miscdev: Misc device handle
- * @error_data_lock: Error counter and states spinlock
* @clks: Clocks managed by the SDFEC driver
+ * @waitq: Driver wait queue
+ * @config: Configuration of the SDFEC device
* @dev_name: Device name
+ * @flags: spinlock flags
+ * @regs: device physical base address
+ * @dev: pointer to device struct
+ * @state: State of the SDFEC device
+ * @error_data_lock: Error counter and states spinlock
* @dev_id: Device ID
+ * @isr_err_count: Count of ISR errors
+ * @cecc_count: Count of Correctable ECC errors (SBE)
+ * @uecc_count: Count of Uncorrectable ECC errors (MBE)
+ * @irq: IRQ number
+ * @state_updated: indicates State updated by interrupt handler
+ * @stats_updated: indicates Stats updated by interrupt handler
+ * @intr_enabled: indicates IRQ enabled
*
* This structure contains necessary state for SDFEC driver to operate
*/
struct xsdfec_dev {
+ struct miscdevice miscdev;
+ struct xsdfec_clks clks;
+ wait_queue_head_t waitq;
+ struct xsdfec_config config;
+ char dev_name[DEV_NAME_LEN];
+ unsigned long flags;
void __iomem *regs;
struct device *dev;
- struct miscdevice miscdev;
+ enum xsdfec_state state;
/* Spinlock to protect state_updated and stats_updated */
spinlock_t error_data_lock;
- struct xsdfec_clks clks;
- char dev_name[DEV_NAME_LEN];
int dev_id;
+ u32 isr_err_count;
+ u32 cecc_count;
+ u32 uecc_count;
+ int irq;
+ bool state_updated;
+ bool stats_updated;
+ bool intr_enabled;
};
+static inline void xsdfec_regwrite(struct xsdfec_dev *xsdfec, u32 addr,
+ u32 value)
+{
+ dev_dbg(xsdfec->dev, "Writing 0x%x to offset 0x%x", value, addr);
+ iowrite32(value, xsdfec->regs + addr);
+}
+
+static inline u32 xsdfec_regread(struct xsdfec_dev *xsdfec, u32 addr)
+{
+ u32 rval;
+
+ rval = ioread32(xsdfec->regs + addr);
+ dev_dbg(xsdfec->dev, "Read value = 0x%x from offset 0x%x", rval, addr);
+ return rval;
+}
+
+static void update_bool_config_from_reg(struct xsdfec_dev *xsdfec,
+ u32 reg_offset, u32 bit_num,
+ char *config_value)
+{
+ u32 reg_val;
+ u32 bit_mask = 1 << bit_num;
+
+ reg_val = xsdfec_regread(xsdfec, reg_offset);
+ *config_value = (reg_val & bit_mask) > 0;
+}
+
+static void update_config_from_hw(struct xsdfec_dev *xsdfec)
+{
+ u32 reg_value;
+ bool sdfec_started;
+
+ /* Update the Order */
+ reg_value = xsdfec_regread(xsdfec, XSDFEC_ORDER_ADDR);
+ xsdfec->config.order = reg_value;
+
+ update_bool_config_from_reg(xsdfec, XSDFEC_BYPASS_ADDR,
+ 0, /* Bit Number, maybe change to mask */
+ &xsdfec->config.bypass);
+
+ update_bool_config_from_reg(xsdfec, XSDFEC_CODE_WR_PROTECT_ADDR,
+ 0, /* Bit Number */
+ &xsdfec->config.code_wr_protect);
+
+ reg_value = xsdfec_regread(xsdfec, XSDFEC_IMR_ADDR);
+ xsdfec->config.irq.enable_isr = (reg_value & XSDFEC_ISR_MASK) > 0;
+
+ reg_value = xsdfec_regread(xsdfec, XSDFEC_ECC_IMR_ADDR);
+ xsdfec->config.irq.enable_ecc_isr =
+ (reg_value & XSDFEC_ECC_ISR_MASK) > 0;
+
+ reg_value = xsdfec_regread(xsdfec, XSDFEC_AXIS_ENABLE_ADDR);
+ sdfec_started = (reg_value & XSDFEC_AXIS_IN_ENABLE_MASK) > 0;
+ if (sdfec_started)
+ xsdfec->state = XSDFEC_STARTED;
+ else
+ xsdfec->state = XSDFEC_STOPPED;
+}
+
+static int xsdfec_get_status(struct xsdfec_dev *xsdfec, void __user *arg)
+{
+ struct xsdfec_status status;
+ int err;
+
+ memset(&status, 0, sizeof(status));
+ spin_lock_irqsave(&xsdfec->error_data_lock, xsdfec->flags);
+ status.state = xsdfec->state;
+ xsdfec->state_updated = false;
+ spin_unlock_irqrestore(&xsdfec->error_data_lock, xsdfec->flags);
+ status.activity = (xsdfec_regread(xsdfec, XSDFEC_ACTIVE_ADDR) &
+ XSDFEC_IS_ACTIVITY_SET);
+
+ err = copy_to_user(arg, &status, sizeof(status));
+ if (err)
+ err = -EFAULT;
+
+ return err;
+}
+
+static int xsdfec_get_config(struct xsdfec_dev *xsdfec, void __user *arg)
+{
+ int err;
+
+ err = copy_to_user(arg, &xsdfec->config, sizeof(xsdfec->config));
+ if (err)
+ err = -EFAULT;
+
+ return err;
+}
+
+static int xsdfec_isr_enable(struct xsdfec_dev *xsdfec, bool enable)
+{
+ u32 mask_read;
+
+ if (enable) {
+ /* Enable */
+ xsdfec_regwrite(xsdfec, XSDFEC_IER_ADDR, XSDFEC_ISR_MASK);
+ mask_read = xsdfec_regread(xsdfec, XSDFEC_IMR_ADDR);
+ if (mask_read & XSDFEC_ISR_MASK) {
+ dev_dbg(xsdfec->dev,
+ "SDFEC enabling irq with IER failed");
+ return -EIO;
+ }
+ } else {
+ /* Disable */
+ xsdfec_regwrite(xsdfec, XSDFEC_IDR_ADDR, XSDFEC_ISR_MASK);
+ mask_read = xsdfec_regread(xsdfec, XSDFEC_IMR_ADDR);
+ if ((mask_read & XSDFEC_ISR_MASK) != XSDFEC_ISR_MASK) {
+ dev_dbg(xsdfec->dev,
+ "SDFEC disabling irq with IDR failed");
+ return -EIO;
+ }
+ }
+ return 0;
+}
+
+static int xsdfec_ecc_isr_enable(struct xsdfec_dev *xsdfec, bool enable)
+{
+ u32 mask_read;
+
+ if (enable) {
+ /* Enable */
+ xsdfec_regwrite(xsdfec, XSDFEC_ECC_IER_ADDR,
+ XSDFEC_ALL_ECC_ISR_MASK);
+ mask_read = xsdfec_regread(xsdfec, XSDFEC_ECC_IMR_ADDR);
+ if (mask_read & XSDFEC_ALL_ECC_ISR_MASK) {
+ dev_dbg(xsdfec->dev,
+ "SDFEC enabling ECC irq with ECC IER failed");
+ return -EIO;
+ }
+ } else {
+ /* Disable */
+ xsdfec_regwrite(xsdfec, XSDFEC_ECC_IDR_ADDR,
+ XSDFEC_ALL_ECC_ISR_MASK);
+ mask_read = xsdfec_regread(xsdfec, XSDFEC_ECC_IMR_ADDR);
+ if (!(((mask_read & XSDFEC_ALL_ECC_ISR_MASK) ==
+ XSDFEC_ECC_ISR_MASK) ||
+ ((mask_read & XSDFEC_ALL_ECC_ISR_MASK) ==
+ XSDFEC_PL_INIT_ECC_ISR_MASK))) {
+ dev_dbg(xsdfec->dev,
+ "SDFEC disable ECC irq with ECC IDR failed");
+ return -EIO;
+ }
+ }
+ return 0;
+}
+
+static int xsdfec_set_irq(struct xsdfec_dev *xsdfec, void __user *arg)
+{
+ struct xsdfec_irq irq;
+ int err;
+ int isr_err;
+ int ecc_err;
+
+ err = copy_from_user(&irq, arg, sizeof(irq));
+ if (err)
+ return -EFAULT;
+
+ /* Setup tlast related IRQ */
+ isr_err = xsdfec_isr_enable(xsdfec, irq.enable_isr);
+ if (!isr_err)
+ xsdfec->config.irq.enable_isr = irq.enable_isr;
+
+ /* Setup ECC related IRQ */
+ ecc_err = xsdfec_ecc_isr_enable(xsdfec, irq.enable_ecc_isr);
+ if (!ecc_err)
+ xsdfec->config.irq.enable_ecc_isr = irq.enable_ecc_isr;
+
+ if (isr_err < 0 || ecc_err < 0)
+ err = -EIO;
+
+ return err;
+}
+
+static int xsdfec_set_turbo(struct xsdfec_dev *xsdfec, void __user *arg)
+{
+ struct xsdfec_turbo turbo;
+ int err;
+ u32 turbo_write;
+
+ err = copy_from_user(&turbo, arg, sizeof(turbo));
+ if (err)
+ return -EFAULT;
+
+ if (turbo.alg >= XSDFEC_TURBO_ALG_MAX)
+ return -EINVAL;
+
+ if (turbo.scale > XSDFEC_TURBO_SCALE_MAX)
+ return -EINVAL;
+
+ /* Check to see what device tree says about the FEC codes */
+ if (xsdfec->config.code == XSDFEC_LDPC_CODE)
+ return -EIO;
+
+ turbo_write = ((turbo.scale & XSDFEC_TURBO_SCALE_MASK)
+ << XSDFEC_TURBO_SCALE_BIT_POS) |
+ turbo.alg;
+ xsdfec_regwrite(xsdfec, XSDFEC_TURBO_ADDR, turbo_write);
+ return err;
+}
+
+static int xsdfec_get_turbo(struct xsdfec_dev *xsdfec, void __user *arg)
+{
+ u32 reg_value;
+ struct xsdfec_turbo turbo_params;
+ int err;
+
+ if (xsdfec->config.code == XSDFEC_LDPC_CODE)
+ return -EIO;
+
+ memset(&turbo_params, 0, sizeof(turbo_params));
+ reg_value = xsdfec_regread(xsdfec, XSDFEC_TURBO_ADDR);
+
+ turbo_params.scale = (reg_value & XSDFEC_TURBO_SCALE_MASK) >>
+ XSDFEC_TURBO_SCALE_BIT_POS;
+ turbo_params.alg = reg_value & 0x1;
+
+ err = copy_to_user(arg, &turbo_params, sizeof(turbo_params));
+ if (err)
+ err = -EFAULT;
+
+ return err;
+}
+
+static int xsdfec_reg0_write(struct xsdfec_dev *xsdfec, u32 n, u32 k, u32 psize,
+ u32 offset)
+{
+ u32 wdata;
+
+ if (n < XSDFEC_REG0_N_MIN || n > XSDFEC_REG0_N_MAX || psize == 0 ||
+ (n > XSDFEC_REG0_N_MUL_P * psize) || n <= k || ((n % psize) != 0)) {
+ dev_dbg(xsdfec->dev, "N value is not in range");
+ return -EINVAL;
+ }
+ n <<= XSDFEC_REG0_N_LSB;
+
+ if (k < XSDFEC_REG0_K_MIN || k > XSDFEC_REG0_K_MAX ||
+ (k > XSDFEC_REG0_K_MUL_P * psize) || ((k % psize) != 0)) {
+ dev_dbg(xsdfec->dev, "K value is not in range");
+ return -EINVAL;
+ }
+ k = k << XSDFEC_REG0_K_LSB;
+ wdata = k | n;
+
+ if (XSDFEC_LDPC_CODE_REG0_ADDR_BASE + (offset * XSDFEC_LDPC_REG_JUMP) >
+ XSDFEC_LDPC_CODE_REG0_ADDR_HIGH) {
+ dev_dbg(xsdfec->dev, "Writing outside of LDPC reg0 space 0x%x",
+ XSDFEC_LDPC_CODE_REG0_ADDR_BASE +
+ (offset * XSDFEC_LDPC_REG_JUMP));
+ return -EINVAL;
+ }
+ xsdfec_regwrite(xsdfec,
+ XSDFEC_LDPC_CODE_REG0_ADDR_BASE +
+ (offset * XSDFEC_LDPC_REG_JUMP),
+ wdata);
+ return 0;
+}
+
+static int xsdfec_reg1_write(struct xsdfec_dev *xsdfec, u32 psize,
+ u32 no_packing, u32 nm, u32 offset)
+{
+ u32 wdata;
+
+ if (psize < XSDFEC_REG1_PSIZE_MIN || psize > XSDFEC_REG1_PSIZE_MAX) {
+ dev_dbg(xsdfec->dev, "Psize is not in range");
+ return -EINVAL;
+ }
+
+ if (no_packing != 0 && no_packing != 1)
+ dev_dbg(xsdfec->dev, "No-packing bit register invalid");
+ no_packing = ((no_packing << XSDFEC_REG1_NO_PACKING_LSB) &
+ XSDFEC_REG1_NO_PACKING_MASK);
+
+ if (nm & ~(XSDFEC_REG1_NM_MASK >> XSDFEC_REG1_NM_LSB))
+ dev_dbg(xsdfec->dev, "NM is beyond 10 bits");
+ nm = (nm << XSDFEC_REG1_NM_LSB) & XSDFEC_REG1_NM_MASK;
+
+ wdata = nm | no_packing | psize;
+ if (XSDFEC_LDPC_CODE_REG1_ADDR_BASE + (offset * XSDFEC_LDPC_REG_JUMP) >
+ XSDFEC_LDPC_CODE_REG1_ADDR_HIGH) {
+ dev_dbg(xsdfec->dev, "Writing outside of LDPC reg1 space 0x%x",
+ XSDFEC_LDPC_CODE_REG1_ADDR_BASE +
+ (offset * XSDFEC_LDPC_REG_JUMP));
+ return -EINVAL;
+ }
+ xsdfec_regwrite(xsdfec,
+ XSDFEC_LDPC_CODE_REG1_ADDR_BASE +
+ (offset * XSDFEC_LDPC_REG_JUMP),
+ wdata);
+ return 0;
+}
+
+static int xsdfec_reg2_write(struct xsdfec_dev *xsdfec, u32 nlayers, u32 nmqc,
+ u32 norm_type, u32 special_qc, u32 no_final_parity,
+ u32 max_schedule, u32 offset)
+{
+ u32 wdata;
+
+ if (nlayers < XSDFEC_REG2_NLAYERS_MIN ||
+ nlayers > XSDFEC_REG2_NLAYERS_MAX) {
+ dev_dbg(xsdfec->dev, "Nlayers is not in range");
+ return -EINVAL;
+ }
+
+ if (nmqc & ~(XSDFEC_REG2_NNMQC_MASK >> XSDFEC_REG2_NMQC_LSB))
+ dev_dbg(xsdfec->dev, "NMQC exceeds 11 bits");
+ nmqc = (nmqc << XSDFEC_REG2_NMQC_LSB) & XSDFEC_REG2_NNMQC_MASK;
+
+ if (norm_type > 1)
+ dev_dbg(xsdfec->dev, "Norm type is invalid");
+ norm_type = ((norm_type << XSDFEC_REG2_NORM_TYPE_LSB) &
+ XSDFEC_REG2_NORM_TYPE_MASK);
+ if (special_qc > 1)
+ dev_dbg(xsdfec->dev, "Special QC in invalid");
+ special_qc = ((special_qc << XSDFEC_REG2_SPEICAL_QC_LSB) &
+ XSDFEC_REG2_SPECIAL_QC_MASK);
+
+ if (no_final_parity > 1)
+ dev_dbg(xsdfec->dev, "No final parity check invalid");
+ no_final_parity =
+ ((no_final_parity << XSDFEC_REG2_NO_FINAL_PARITY_LSB) &
+ XSDFEC_REG2_NO_FINAL_PARITY_MASK);
+ if (max_schedule &
+ ~(XSDFEC_REG2_MAX_SCHEDULE_MASK >> XSDFEC_REG2_MAX_SCHEDULE_LSB))
+ dev_dbg(xsdfec->dev, "Max Schedule exceeds 2 bits");
+ max_schedule = ((max_schedule << XSDFEC_REG2_MAX_SCHEDULE_LSB) &
+ XSDFEC_REG2_MAX_SCHEDULE_MASK);
+
+ wdata = (max_schedule | no_final_parity | special_qc | norm_type |
+ nmqc | nlayers);
+
+ if (XSDFEC_LDPC_CODE_REG2_ADDR_BASE + (offset * XSDFEC_LDPC_REG_JUMP) >
+ XSDFEC_LDPC_CODE_REG2_ADDR_HIGH) {
+ dev_dbg(xsdfec->dev, "Writing outside of LDPC reg2 space 0x%x",
+ XSDFEC_LDPC_CODE_REG2_ADDR_BASE +
+ (offset * XSDFEC_LDPC_REG_JUMP));
+ return -EINVAL;
+ }
+ xsdfec_regwrite(xsdfec,
+ XSDFEC_LDPC_CODE_REG2_ADDR_BASE +
+ (offset * XSDFEC_LDPC_REG_JUMP),
+ wdata);
+ return 0;
+}
+
+static int xsdfec_reg3_write(struct xsdfec_dev *xsdfec, u8 sc_off, u8 la_off,
+ u16 qc_off, u32 offset)
+{
+ u32 wdata;
+
+ wdata = ((qc_off << XSDFEC_REG3_QC_OFF_LSB) |
+ (la_off << XSDFEC_REG3_LA_OFF_LSB) | sc_off);
+ if (XSDFEC_LDPC_CODE_REG3_ADDR_BASE + (offset * XSDFEC_LDPC_REG_JUMP) >
+ XSDFEC_LDPC_CODE_REG3_ADDR_HIGH) {
+ dev_dbg(xsdfec->dev, "Writing outside of LDPC reg3 space 0x%x",
+ XSDFEC_LDPC_CODE_REG3_ADDR_BASE +
+ (offset * XSDFEC_LDPC_REG_JUMP));
+ return -EINVAL;
+ }
+ xsdfec_regwrite(xsdfec,
+ XSDFEC_LDPC_CODE_REG3_ADDR_BASE +
+ (offset * XSDFEC_LDPC_REG_JUMP),
+ wdata);
+ return 0;
+}
+
+static int xsdfec_table_write(struct xsdfec_dev *xsdfec, u32 offset,
+ u32 *src_ptr, u32 len, const u32 base_addr,
+ const u32 depth)
+{
+ u32 reg = 0;
+ u32 res;
+ u32 n, i;
+ u32 *addr = NULL;
+ struct page *page[MAX_NUM_PAGES];
+
+ /*
+ * Writes that go beyond the length of
+ * Shared Scale(SC) table should fail
+ */
+ if (offset > depth / XSDFEC_REG_WIDTH_JUMP ||
+ len > depth / XSDFEC_REG_WIDTH_JUMP ||
+ offset + len > depth / XSDFEC_REG_WIDTH_JUMP) {
+ dev_dbg(xsdfec->dev, "Write exceeds SC table length");
+ return -EINVAL;
+ }
+
+ n = (len * XSDFEC_REG_WIDTH_JUMP) / PAGE_SIZE;
+ if ((len * XSDFEC_REG_WIDTH_JUMP) % PAGE_SIZE)
+ n += 1;
+
+ res = get_user_pages_fast((unsigned long)src_ptr, n, 0, page);
+ if (res < n) {
+ for (i = 0; i < res; i++)
+ put_page(page[i]);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < n; i++) {
+ addr = kmap(page[i]);
+ do {
+ xsdfec_regwrite(xsdfec,
+ base_addr + ((offset + reg) *
+ XSDFEC_REG_WIDTH_JUMP),
+ addr[reg]);
+ reg++;
+ } while ((reg < len) &&
+ ((reg * XSDFEC_REG_WIDTH_JUMP) % PAGE_SIZE));
+ put_page(page[i]);
+ }
+ return reg;
+}
+
+static int xsdfec_add_ldpc(struct xsdfec_dev *xsdfec, void __user *arg)
+{
+ struct xsdfec_ldpc_params *ldpc;
+ int ret, n;
+
+ ldpc = kzalloc(sizeof(*ldpc), GFP_KERNEL);
+ if (!ldpc)
+ return -ENOMEM;
+
+ if (copy_from_user(ldpc, arg, sizeof(*ldpc))) {
+ ret = -EFAULT;
+ goto err_out;
+ }
+
+ if (xsdfec->config.code == XSDFEC_TURBO_CODE) {
+ ret = -EIO;
+ goto err_out;
+ }
+
+ /* Verify Device has not started */
+ if (xsdfec->state == XSDFEC_STARTED) {
+ ret = -EIO;
+ goto err_out;
+ }
+
+ if (xsdfec->config.code_wr_protect) {
+ ret = -EIO;
+ goto err_out;
+ }
+
+ /* Write Reg 0 */
+ ret = xsdfec_reg0_write(xsdfec, ldpc->n, ldpc->k, ldpc->psize,
+ ldpc->code_id);
+ if (ret)
+ goto err_out;
+
+ /* Write Reg 1 */
+ ret = xsdfec_reg1_write(xsdfec, ldpc->psize, ldpc->no_packing, ldpc->nm,
+ ldpc->code_id);
+ if (ret)
+ goto err_out;
+
+ /* Write Reg 2 */
+ ret = xsdfec_reg2_write(xsdfec, ldpc->nlayers, ldpc->nmqc,
+ ldpc->norm_type, ldpc->special_qc,
+ ldpc->no_final_parity, ldpc->max_schedule,
+ ldpc->code_id);
+ if (ret)
+ goto err_out;
+
+ /* Write Reg 3 */
+ ret = xsdfec_reg3_write(xsdfec, ldpc->sc_off, ldpc->la_off,
+ ldpc->qc_off, ldpc->code_id);
+ if (ret)
+ goto err_out;
+
+ /* Write Shared Codes */
+ n = ldpc->nlayers / 4;
+ if (ldpc->nlayers % 4)
+ n++;
+
+ ret = xsdfec_table_write(xsdfec, ldpc->sc_off, ldpc->sc_table, n,
+ XSDFEC_LDPC_SC_TABLE_ADDR_BASE,
+ XSDFEC_SC_TABLE_DEPTH);
+ if (ret < 0)
+ goto err_out;
+
+ ret = xsdfec_table_write(xsdfec, 4 * ldpc->la_off, ldpc->la_table,
+ ldpc->nlayers, XSDFEC_LDPC_LA_TABLE_ADDR_BASE,
+ XSDFEC_LA_TABLE_DEPTH);
+ if (ret < 0)
+ goto err_out;
+
+ ret = xsdfec_table_write(xsdfec, 4 * ldpc->qc_off, ldpc->qc_table,
+ ldpc->nqc, XSDFEC_LDPC_QC_TABLE_ADDR_BASE,
+ XSDFEC_QC_TABLE_DEPTH);
+ if (ret > 0)
+ ret = 0;
+err_out:
+ kfree(ldpc);
+ return ret;
+}
+
+static int xsdfec_set_order(struct xsdfec_dev *xsdfec, void __user *arg)
+{
+ bool order_invalid;
+ enum xsdfec_order order;
+ int err;
+
+ err = get_user(order, (enum xsdfec_order *)arg);
+ if (err)
+ return -EFAULT;
+
+ order_invalid = (order != XSDFEC_MAINTAIN_ORDER) &&
+ (order != XSDFEC_OUT_OF_ORDER);
+ if (order_invalid)
+ return -EINVAL;
+
+ /* Verify Device has not started */
+ if (xsdfec->state == XSDFEC_STARTED)
+ return -EIO;
+
+ xsdfec_regwrite(xsdfec, XSDFEC_ORDER_ADDR, order);
+
+ xsdfec->config.order = order;
+
+ return 0;
+}
+
+static int xsdfec_set_bypass(struct xsdfec_dev *xsdfec, bool __user *arg)
+{
+ bool bypass;
+ int err;
+
+ err = get_user(bypass, arg);
+ if (err)
+ return -EFAULT;
+
+ /* Verify Device has not started */
+ if (xsdfec->state == XSDFEC_STARTED)
+ return -EIO;
+
+ if (bypass)
+ xsdfec_regwrite(xsdfec, XSDFEC_BYPASS_ADDR, 1);
+ else
+ xsdfec_regwrite(xsdfec, XSDFEC_BYPASS_ADDR, 0);
+
+ xsdfec->config.bypass = bypass;
+
+ return 0;
+}
+
+static int xsdfec_is_active(struct xsdfec_dev *xsdfec, bool __user *arg)
+{
+ u32 reg_value;
+ bool is_active;
+ int err;
+
+ reg_value = xsdfec_regread(xsdfec, XSDFEC_ACTIVE_ADDR);
+ /* using a double ! operator instead of casting */
+ is_active = !!(reg_value & XSDFEC_IS_ACTIVITY_SET);
+ err = put_user(is_active, arg);
+ if (err)
+ return -EFAULT;
+
+ return err;
+}
+
+static u32
+xsdfec_translate_axis_width_cfg_val(enum xsdfec_axis_width axis_width_cfg)
+{
+ u32 axis_width_field = 0;
+
+ switch (axis_width_cfg) {
+ case XSDFEC_1x128b:
+ axis_width_field = 0;
+ break;
+ case XSDFEC_2x128b:
+ axis_width_field = 1;
+ break;
+ case XSDFEC_4x128b:
+ axis_width_field = 2;
+ break;
+ }
+
+ return axis_width_field;
+}
+
+static u32 xsdfec_translate_axis_words_cfg_val(enum xsdfec_axis_word_include
+ axis_word_inc_cfg)
+{
+ u32 axis_words_field = 0;
+
+ if (axis_word_inc_cfg == XSDFEC_FIXED_VALUE ||
+ axis_word_inc_cfg == XSDFEC_IN_BLOCK)
+ axis_words_field = 0;
+ else if (axis_word_inc_cfg == XSDFEC_PER_AXI_TRANSACTION)
+ axis_words_field = 1;
+
+ return axis_words_field;
+}
+
+static int xsdfec_cfg_axi_streams(struct xsdfec_dev *xsdfec)
+{
+ u32 reg_value;
+ u32 dout_words_field;
+ u32 dout_width_field;
+ u32 din_words_field;
+ u32 din_width_field;
+ struct xsdfec_config *config = &xsdfec->config;
+
+ /* translate config info to register values */
+ dout_words_field =
+ xsdfec_translate_axis_words_cfg_val(config->dout_word_include);
+ dout_width_field =
+ xsdfec_translate_axis_width_cfg_val(config->dout_width);
+ din_words_field =
+ xsdfec_translate_axis_words_cfg_val(config->din_word_include);
+ din_width_field =
+ xsdfec_translate_axis_width_cfg_val(config->din_width);
+
+ reg_value = dout_words_field << XSDFEC_AXIS_DOUT_WORDS_LSB;
+ reg_value |= dout_width_field << XSDFEC_AXIS_DOUT_WIDTH_LSB;
+ reg_value |= din_words_field << XSDFEC_AXIS_DIN_WORDS_LSB;
+ reg_value |= din_width_field << XSDFEC_AXIS_DIN_WIDTH_LSB;
+
+ xsdfec_regwrite(xsdfec, XSDFEC_AXIS_WIDTH_ADDR, reg_value);
+
+ return 0;
+}
+
+static int xsdfec_dev_open(struct inode *iptr, struct file *fptr)
+{
+ return 0;
+}
+
+static int xsdfec_dev_release(struct inode *iptr, struct file *fptr)
+{
+ return 0;
+}
+
+static int xsdfec_start(struct xsdfec_dev *xsdfec)
+{
+ u32 regread;
+
+ regread = xsdfec_regread(xsdfec, XSDFEC_FEC_CODE_ADDR);
+ regread &= 0x1;
+ if (regread != xsdfec->config.code) {
+ dev_dbg(xsdfec->dev,
+ "%s SDFEC HW code does not match driver code, reg %d, code %d",
+ __func__, regread, xsdfec->config.code);
+ return -EINVAL;
+ }
+
+ /* Set AXIS enable */
+ xsdfec_regwrite(xsdfec, XSDFEC_AXIS_ENABLE_ADDR,
+ XSDFEC_AXIS_ENABLE_MASK);
+ /* Done */
+ xsdfec->state = XSDFEC_STARTED;
+ return 0;
+}
+
+static int xsdfec_stop(struct xsdfec_dev *xsdfec)
+{
+ u32 regread;
+
+ if (xsdfec->state != XSDFEC_STARTED)
+ dev_dbg(xsdfec->dev, "Device not started correctly");
+ /* Disable AXIS_ENABLE Input interfaces only */
+ regread = xsdfec_regread(xsdfec, XSDFEC_AXIS_ENABLE_ADDR);
+ regread &= (~XSDFEC_AXIS_IN_ENABLE_MASK);
+ xsdfec_regwrite(xsdfec, XSDFEC_AXIS_ENABLE_ADDR, regread);
+ /* Stop */
+ xsdfec->state = XSDFEC_STOPPED;
+ return 0;
+}
+
+static int xsdfec_clear_stats(struct xsdfec_dev *xsdfec)
+{
+ spin_lock_irqsave(&xsdfec->error_data_lock, xsdfec->flags);
+ xsdfec->isr_err_count = 0;
+ xsdfec->uecc_count = 0;
+ xsdfec->cecc_count = 0;
+ spin_unlock_irqrestore(&xsdfec->error_data_lock, xsdfec->flags);
+
+ return 0;
+}
+
+static int xsdfec_get_stats(struct xsdfec_dev *xsdfec, void __user *arg)
+{
+ int err;
+ struct xsdfec_stats user_stats;
+
+ spin_lock_irqsave(&xsdfec->error_data_lock, xsdfec->flags);
+ user_stats.isr_err_count = xsdfec->isr_err_count;
+ user_stats.cecc_count = xsdfec->cecc_count;
+ user_stats.uecc_count = xsdfec->uecc_count;
+ xsdfec->stats_updated = false;
+ spin_unlock_irqrestore(&xsdfec->error_data_lock, xsdfec->flags);
+
+ err = copy_to_user(arg, &user_stats, sizeof(user_stats));
+ if (err)
+ err = -EFAULT;
+
+ return err;
+}
+
+static int xsdfec_set_default_config(struct xsdfec_dev *xsdfec)
+{
+ /* Ensure registers are aligned with core configuration */
+ xsdfec_regwrite(xsdfec, XSDFEC_FEC_CODE_ADDR, xsdfec->config.code);
+ xsdfec_cfg_axi_streams(xsdfec);
+ update_config_from_hw(xsdfec);
+
+ return 0;
+}
+
+static long xsdfec_dev_ioctl(struct file *fptr, unsigned int cmd,
+ unsigned long data)
+{
+ struct xsdfec_dev *xsdfec;
+ void __user *arg = NULL;
+ int rval = -EINVAL;
+
+ xsdfec = container_of(fptr->private_data, struct xsdfec_dev, miscdev);
+
+ /* In failed state allow only reset and get status IOCTLs */
+ if (xsdfec->state == XSDFEC_NEEDS_RESET &&
+ (cmd != XSDFEC_SET_DEFAULT_CONFIG && cmd != XSDFEC_GET_STATUS &&
+ cmd != XSDFEC_GET_STATS && cmd != XSDFEC_CLEAR_STATS)) {
+ return -EPERM;
+ }
+
+ if (_IOC_TYPE(cmd) != XSDFEC_MAGIC)
+ return -ENOTTY;
+
+ /* check if ioctl argument is present and valid */
+ if (_IOC_DIR(cmd) != _IOC_NONE) {
+ arg = (void __user *)data;
+ if (!arg)
+ return rval;
+ }
+
+ switch (cmd) {
+ case XSDFEC_START_DEV:
+ rval = xsdfec_start(xsdfec);
+ break;
+ case XSDFEC_STOP_DEV:
+ rval = xsdfec_stop(xsdfec);
+ break;
+ case XSDFEC_CLEAR_STATS:
+ rval = xsdfec_clear_stats(xsdfec);
+ break;
+ case XSDFEC_GET_STATS:
+ rval = xsdfec_get_stats(xsdfec, arg);
+ break;
+ case XSDFEC_GET_STATUS:
+ rval = xsdfec_get_status(xsdfec, arg);
+ break;
+ case XSDFEC_GET_CONFIG:
+ rval = xsdfec_get_config(xsdfec, arg);
+ break;
+ case XSDFEC_SET_DEFAULT_CONFIG:
+ rval = xsdfec_set_default_config(xsdfec);
+ break;
+ case XSDFEC_SET_IRQ:
+ rval = xsdfec_set_irq(xsdfec, arg);
+ break;
+ case XSDFEC_SET_TURBO:
+ rval = xsdfec_set_turbo(xsdfec, arg);
+ break;
+ case XSDFEC_GET_TURBO:
+ rval = xsdfec_get_turbo(xsdfec, arg);
+ break;
+ case XSDFEC_ADD_LDPC_CODE_PARAMS:
+ rval = xsdfec_add_ldpc(xsdfec, arg);
+ break;
+ case XSDFEC_SET_ORDER:
+ rval = xsdfec_set_order(xsdfec, arg);
+ break;
+ case XSDFEC_SET_BYPASS:
+ rval = xsdfec_set_bypass(xsdfec, arg);
+ break;
+ case XSDFEC_IS_ACTIVE:
+ rval = xsdfec_is_active(xsdfec, (bool __user *)arg);
+ break;
+ default:
+ /* Should not get here */
+ break;
+ }
+ return rval;
+}
+
+#ifdef CONFIG_COMPAT
+static long xsdfec_dev_compat_ioctl(struct file *file, unsigned int cmd,
+ unsigned long data)
+{
+ return xsdfec_dev_ioctl(file, cmd, (unsigned long)compat_ptr(data));
+}
+#endif
+
+static unsigned int xsdfec_poll(struct file *file, poll_table *wait)
+{
+ unsigned int mask = 0;
+ struct xsdfec_dev *xsdfec;
+
+ xsdfec = container_of(file->private_data, struct xsdfec_dev, miscdev);
+
+ if (!xsdfec)
+ return POLLNVAL | POLLHUP;
+
+ poll_wait(file, &xsdfec->waitq, wait);
+
+ /* XSDFEC ISR detected an error */
+ spin_lock_irqsave(&xsdfec->error_data_lock, xsdfec->flags);
+ if (xsdfec->state_updated)
+ mask |= POLLIN | POLLPRI;
+
+ if (xsdfec->stats_updated)
+ mask |= POLLIN | POLLRDNORM;
+ spin_unlock_irqrestore(&xsdfec->error_data_lock, xsdfec->flags);
+
+ return mask;
+}
+
static const struct file_operations xsdfec_fops = {
.owner = THIS_MODULE,
+ .open = xsdfec_dev_open,
+ .release = xsdfec_dev_release,
+ .unlocked_ioctl = xsdfec_dev_ioctl,
+ .poll = xsdfec_poll,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = xsdfec_dev_compat_ioctl,
+#endif
};
+static int xsdfec_parse_of(struct xsdfec_dev *xsdfec)
+{
+ struct device *dev = xsdfec->dev;
+ struct device_node *node = dev->of_node;
+ int rval;
+ const char *fec_code;
+ u32 din_width;
+ u32 din_word_include;
+ u32 dout_width;
+ u32 dout_word_include;
+
+ rval = of_property_read_string(node, "xlnx,sdfec-code", &fec_code);
+ if (rval < 0)
+ return rval;
+
+ if (!strcasecmp(fec_code, "ldpc"))
+ xsdfec->config.code = XSDFEC_LDPC_CODE;
+ else if (!strcasecmp(fec_code, "turbo"))
+ xsdfec->config.code = XSDFEC_TURBO_CODE;
+ else
+ return -EINVAL;
+
+ rval = of_property_read_u32(node, "xlnx,sdfec-din-words",
+ &din_word_include);
+ if (rval < 0)
+ return rval;
+
+ if (din_word_include < XSDFEC_AXIS_WORDS_INCLUDE_MAX)
+ xsdfec->config.din_word_include = din_word_include;
+ else
+ return -EINVAL;
+
+ rval = of_property_read_u32(node, "xlnx,sdfec-din-width", &din_width);
+ if (rval < 0)
+ return rval;
+
+ switch (din_width) {
+ /* Fall through and set for valid values */
+ case XSDFEC_1x128b:
+ case XSDFEC_2x128b:
+ case XSDFEC_4x128b:
+ xsdfec->config.din_width = din_width;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ rval = of_property_read_u32(node, "xlnx,sdfec-dout-words",
+ &dout_word_include);
+ if (rval < 0)
+ return rval;
+
+ if (dout_word_include < XSDFEC_AXIS_WORDS_INCLUDE_MAX)
+ xsdfec->config.dout_word_include = dout_word_include;
+ else
+ return -EINVAL;
+
+ rval = of_property_read_u32(node, "xlnx,sdfec-dout-width", &dout_width);
+ if (rval < 0)
+ return rval;
+
+ switch (dout_width) {
+ /* Fall through and set for valid values */
+ case XSDFEC_1x128b:
+ case XSDFEC_2x128b:
+ case XSDFEC_4x128b:
+ xsdfec->config.dout_width = dout_width;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Write LDPC to CODE Register */
+ xsdfec_regwrite(xsdfec, XSDFEC_FEC_CODE_ADDR, xsdfec->config.code);
+
+ xsdfec_cfg_axi_streams(xsdfec);
+
+ return 0;
+}
+
+static irqreturn_t xsdfec_irq_thread(int irq, void *dev_id)
+{
+ struct xsdfec_dev *xsdfec = dev_id;
+ irqreturn_t ret = IRQ_HANDLED;
+ u32 ecc_err;
+ u32 isr_err;
+ u32 uecc_count;
+ u32 cecc_count;
+ u32 isr_err_count;
+ u32 aecc_count;
+ u32 tmp;
+
+ WARN_ON(xsdfec->irq != irq);
+
+ /* Mask Interrupts */
+ xsdfec_isr_enable(xsdfec, false);
+ xsdfec_ecc_isr_enable(xsdfec, false);
+ /* Read ISR */
+ ecc_err = xsdfec_regread(xsdfec, XSDFEC_ECC_ISR_ADDR);
+ isr_err = xsdfec_regread(xsdfec, XSDFEC_ISR_ADDR);
+ /* Clear the interrupts */
+ xsdfec_regwrite(xsdfec, XSDFEC_ECC_ISR_ADDR, ecc_err);
+ xsdfec_regwrite(xsdfec, XSDFEC_ISR_ADDR, isr_err);
+
+ tmp = ecc_err & XSDFEC_ALL_ECC_ISR_MBE_MASK;
+ /* Count uncorrectable 2-bit errors */
+ uecc_count = hweight32(tmp);
+ /* Count all ECC errors */
+ aecc_count = hweight32(ecc_err);
+ /* Number of correctable 1-bit ECC error */
+ cecc_count = aecc_count - 2 * uecc_count;
+ /* Count ISR errors */
+ isr_err_count = hweight32(isr_err);
+ dev_dbg(xsdfec->dev, "tmp=%x, uecc=%x, aecc=%x, cecc=%x, isr=%x", tmp,
+ uecc_count, aecc_count, cecc_count, isr_err_count);
+ dev_dbg(xsdfec->dev, "uecc=%x, cecc=%x, isr=%x", xsdfec->uecc_count,
+ xsdfec->cecc_count, xsdfec->isr_err_count);
+
+ spin_lock_irqsave(&xsdfec->error_data_lock, xsdfec->flags);
+ /* Add new errors to a 2-bits counter */
+ if (uecc_count)
+ xsdfec->uecc_count += uecc_count;
+ /* Add new errors to a 1-bits counter */
+ if (cecc_count)
+ xsdfec->cecc_count += cecc_count;
+ /* Add new errors to a ISR counter */
+ if (isr_err_count)
+ xsdfec->isr_err_count += isr_err_count;
+
+ /* Update state/stats flag */
+ if (uecc_count) {
+ if (ecc_err & XSDFEC_ECC_ISR_MBE_MASK)
+ xsdfec->state = XSDFEC_NEEDS_RESET;
+ else if (ecc_err & XSDFEC_PL_INIT_ECC_ISR_MBE_MASK)
+ xsdfec->state = XSDFEC_PL_RECONFIGURE;
+ xsdfec->stats_updated = true;
+ xsdfec->state_updated = true;
+ }
+
+ if (cecc_count)
+ xsdfec->stats_updated = true;
+
+ if (isr_err_count) {
+ xsdfec->state = XSDFEC_NEEDS_RESET;
+ xsdfec->stats_updated = true;
+ xsdfec->state_updated = true;
+ }
+
+ spin_unlock_irqrestore(&xsdfec->error_data_lock, xsdfec->flags);
+ dev_dbg(xsdfec->dev, "state=%x, stats=%x", xsdfec->state_updated,
+ xsdfec->stats_updated);
+
+ /* Enable another polling */
+ if (xsdfec->state_updated || xsdfec->stats_updated)
+ wake_up_interruptible(&xsdfec->waitq);
+ else
+ ret = IRQ_NONE;
+
+ /* Unmask Interrupts */
+ xsdfec_isr_enable(xsdfec, true);
+ xsdfec_ecc_isr_enable(xsdfec, true);
+
+ return ret;
+}
+
static int xsdfec_clk_init(struct platform_device *pdev,
struct xsdfec_clks *clks)
{
@@ -227,19 +1378,13 @@ static void xsdfec_disable_all_clks(struct xsdfec_clks *clks)
clk_disable_unprepare(clks->axi_clk);
}
-static void xsdfec_idr_remove(struct xsdfec_dev *xsdfec)
-{
- mutex_lock(&dev_idr_lock);
- idr_remove(&dev_idr, xsdfec->dev_id);
- mutex_unlock(&dev_idr_lock);
-}
-
static int xsdfec_probe(struct platform_device *pdev)
{
struct xsdfec_dev *xsdfec;
struct device *dev;
struct resource *res;
int err;
+ bool irq_enabled = true;
xsdfec = devm_kzalloc(&pdev->dev, sizeof(*xsdfec), GFP_KERNEL);
if (!xsdfec)
@@ -260,12 +1405,34 @@ static int xsdfec_probe(struct platform_device *pdev)
goto err_xsdfec_dev;
}
+ xsdfec->irq = platform_get_irq(pdev, 0);
+ if (xsdfec->irq < 0) {
+ dev_dbg(dev, "platform_get_irq failed");
+ irq_enabled = false;
+ }
+
+ err = xsdfec_parse_of(xsdfec);
+ if (err < 0)
+ goto err_xsdfec_dev;
+
+ update_config_from_hw(xsdfec);
+
/* Save driver private data */
platform_set_drvdata(pdev, xsdfec);
- mutex_lock(&dev_idr_lock);
- err = idr_alloc(&dev_idr, xsdfec->dev_name, 0, 0, GFP_KERNEL);
- mutex_unlock(&dev_idr_lock);
+ if (irq_enabled) {
+ init_waitqueue_head(&xsdfec->waitq);
+ /* Register IRQ thread */
+ err = devm_request_threaded_irq(dev, xsdfec->irq, NULL,
+ xsdfec_irq_thread, IRQF_ONESHOT,
+ "xilinx-sdfec16", xsdfec);
+ if (err < 0) {
+ dev_err(dev, "unable to request IRQ%d", xsdfec->irq);
+ goto err_xsdfec_dev;
+ }
+ }
+
+ err = ida_alloc(&dev_nrs, GFP_KERNEL);
if (err < 0)
goto err_xsdfec_dev;
xsdfec->dev_id = err;
@@ -278,12 +1445,12 @@ static int xsdfec_probe(struct platform_device *pdev)
err = misc_register(&xsdfec->miscdev);
if (err) {
dev_err(dev, "error:%d. Unable to register device", err);
- goto err_xsdfec_idr;
+ goto err_xsdfec_ida;
}
return 0;
-err_xsdfec_idr:
- xsdfec_idr_remove(xsdfec);
+err_xsdfec_ida:
+ ida_free(&dev_nrs, xsdfec->dev_id);
err_xsdfec_dev:
xsdfec_disable_all_clks(&xsdfec->clks);
return err;
@@ -295,7 +1462,7 @@ static int xsdfec_remove(struct platform_device *pdev)
xsdfec = platform_get_drvdata(pdev);
misc_deregister(&xsdfec->miscdev);
- xsdfec_idr_remove(xsdfec);
+ ida_free(&dev_nrs, xsdfec->dev_id);
xsdfec_disable_all_clks(&xsdfec->clks);
return 0;
}
@@ -321,8 +1488,6 @@ static int __init xsdfec_init(void)
{
int err;
- mutex_init(&dev_idr_lock);
- idr_init(&dev_idr);
err = platform_driver_register(&xsdfec_driver);
if (err < 0) {
pr_err("%s Unabled to register SDFEC driver", __func__);
@@ -334,7 +1499,6 @@ static int __init xsdfec_init(void)
static void __exit xsdfec_exit(void)
{
platform_driver_unregister(&xsdfec_driver);
- idr_destroy(&dev_idr);
}
module_init(xsdfec_init);
diff --git a/drivers/nvmem/imx-ocotp-scu.c b/drivers/nvmem/imx-ocotp-scu.c
index d9dc482ecb2f..61a17f943f47 100644
--- a/drivers/nvmem/imx-ocotp-scu.c
+++ b/drivers/nvmem/imx-ocotp-scu.c
@@ -16,6 +16,7 @@
enum ocotp_devtype {
IMX8QXP,
+ IMX8QM,
};
struct ocotp_devtype_data {
@@ -39,6 +40,11 @@ static struct ocotp_devtype_data imx8qxp_data = {
.nregs = 800,
};
+static struct ocotp_devtype_data imx8qm_data = {
+ .devtype = IMX8QM,
+ .nregs = 800,
+};
+
static int imx_sc_misc_otp_fuse_read(struct imx_sc_ipc *ipc, u32 word,
u32 *val)
{
@@ -118,6 +124,7 @@ static struct nvmem_config imx_scu_ocotp_nvmem_config = {
static const struct of_device_id imx_scu_ocotp_dt_ids[] = {
{ .compatible = "fsl,imx8qxp-scu-ocotp", (void *)&imx8qxp_data },
+ { .compatible = "fsl,imx8qm-scu-ocotp", (void *)&imx8qm_data },
{ },
};
MODULE_DEVICE_TABLE(of, imx_scu_ocotp_dt_ids);
diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c
index 42d4451e7d67..dff2f3c357f5 100644
--- a/drivers/nvmem/imx-ocotp.c
+++ b/drivers/nvmem/imx-ocotp.c
@@ -479,6 +479,12 @@ static const struct ocotp_params imx8mm_params = {
.set_timing = imx_ocotp_set_imx6_timing,
};
+static const struct ocotp_params imx8mn_params = {
+ .nregs = 256,
+ .bank_address_words = 0,
+ .set_timing = imx_ocotp_set_imx6_timing,
+};
+
static const struct of_device_id imx_ocotp_dt_ids[] = {
{ .compatible = "fsl,imx6q-ocotp", .data = &imx6q_params },
{ .compatible = "fsl,imx6sl-ocotp", .data = &imx6sl_params },
@@ -490,6 +496,7 @@ static const struct of_device_id imx_ocotp_dt_ids[] = {
{ .compatible = "fsl,imx7ulp-ocotp", .data = &imx7ulp_params },
{ .compatible = "fsl,imx8mq-ocotp", .data = &imx8mq_params },
{ .compatible = "fsl,imx8mm-ocotp", .data = &imx8mm_params },
+ { .compatible = "fsl,imx8mn-ocotp", .data = &imx8mn_params },
{ },
};
MODULE_DEVICE_TABLE(of, imx_ocotp_dt_ids);
diff --git a/drivers/nvmem/meson-mx-efuse.c b/drivers/nvmem/meson-mx-efuse.c
index b9f9ce089de9..07c9f38c1c60 100644
--- a/drivers/nvmem/meson-mx-efuse.c
+++ b/drivers/nvmem/meson-mx-efuse.c
@@ -155,7 +155,8 @@ static int meson_mx_efuse_read(void *context, unsigned int offset,
if (err)
break;
- memcpy(buf + i, &tmp, efuse->config.word_size);
+ memcpy(buf + i, &tmp,
+ min_t(size_t, bytes - i, efuse->config.word_size));
}
meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
diff --git a/drivers/nvmem/mxs-ocotp.c b/drivers/nvmem/mxs-ocotp.c
index c34d9fecfb10..8e4898dec002 100644
--- a/drivers/nvmem/mxs-ocotp.c
+++ b/drivers/nvmem/mxs-ocotp.c
@@ -200,6 +200,6 @@ static struct platform_driver mxs_ocotp_driver = {
};
module_platform_driver(mxs_ocotp_driver);
-MODULE_AUTHOR("Stefan Wahren <stefan.wahren@i2se.com>");
+MODULE_AUTHOR("Stefan Wahren <wahrenst@gmx.net");
MODULE_DESCRIPTION("driver for OCOTP in i.MX23/i.MX28");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/sunxi_sid.c b/drivers/nvmem/sunxi_sid.c
index a079a80ddf2c..e26ef1bbf198 100644
--- a/drivers/nvmem/sunxi_sid.c
+++ b/drivers/nvmem/sunxi_sid.c
@@ -186,6 +186,7 @@ static const struct sunxi_sid_cfg sun8i_h3_cfg = {
static const struct sunxi_sid_cfg sun50i_a64_cfg = {
.value_offset = 0x200,
.size = 0x100,
+ .need_register_readout = true,
};
static const struct sunxi_sid_cfg sun50i_h6_cfg = {
diff --git a/drivers/parport/Makefile b/drivers/parport/Makefile
index 6fa41f8173b6..022c566c0f32 100644
--- a/drivers/parport/Makefile
+++ b/drivers/parport/Makefile
@@ -19,4 +19,4 @@ obj-$(CONFIG_PARPORT_ATARI) += parport_atari.o
obj-$(CONFIG_PARPORT_SUNBPP) += parport_sunbpp.o
obj-$(CONFIG_PARPORT_GSC) += parport_gsc.o
obj-$(CONFIG_PARPORT_AX88796) += parport_ax88796.o
-obj-$(CONFIG_PARPORT_IP32) += parport_ip32.o \ No newline at end of file
+obj-$(CONFIG_PARPORT_IP32) += parport_ip32.o
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
index 60d5d985113c..96b888bb49c6 100644
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -680,8 +680,7 @@ static void parport_serial_pci_remove(struct pci_dev *dev)
static int __maybe_unused parport_serial_pci_suspend(struct device *dev)
{
- struct pci_dev *pdev = to_pci_dev(dev);
- struct parport_serial_private *priv = pci_get_drvdata(pdev);
+ struct parport_serial_private *priv = dev_get_drvdata(dev);
if (priv->serial)
pciserial_suspend_ports(priv->serial);
@@ -692,8 +691,7 @@ static int __maybe_unused parport_serial_pci_suspend(struct device *dev)
static int __maybe_unused parport_serial_pci_resume(struct device *dev)
{
- struct pci_dev *pdev = to_pci_dev(dev);
- struct parport_serial_private *priv = pci_get_drvdata(pdev);
+ struct parport_serial_private *priv = dev_get_drvdata(dev);
if (priv->serial)
pciserial_resume_ports(priv->serial);
diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c
index ec54a2aa5cb8..245d60189375 100644
--- a/drivers/pcmcia/i82092.c
+++ b/drivers/pcmcia/i82092.c
@@ -117,9 +117,9 @@ static int i82092aa_pci_probe(struct pci_dev *dev, const struct pci_device_id *i
if (card_present(i)) {
sockets[i].card_state = 3;
- dprintk(KERN_DEBUG "i82092aa: slot %i is occupied\n",i);
+ dev_dbg(&dev->dev, "i82092aa: slot %i is occupied\n", i);
} else {
- dprintk(KERN_DEBUG "i82092aa: slot %i is vacant\n",i);
+ dev_dbg(&dev->dev, "i82092aa: slot %i is vacant\n", i);
}
}
@@ -128,7 +128,7 @@ static int i82092aa_pci_probe(struct pci_dev *dev, const struct pci_device_id *i
pci_write_config_byte(dev, 0x50, configbyte); /* PCI Interrupt Routing Register */
/* Register the interrupt handler */
- dprintk(KERN_DEBUG "Requesting interrupt %i \n",dev->irq);
+ dev_dbg(&dev->dev, "Requesting interrupt %i\n", dev->irq);
if ((ret = request_irq(dev->irq, i82092aa_interrupt, IRQF_SHARED, "i82092aa", i82092aa_interrupt))) {
printk(KERN_ERR "i82092aa: Failed to register IRQ %d, aborting\n", dev->irq);
goto err_out_free_res;
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 0d9fddc498a6..c96a1afc95bd 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -10,7 +10,6 @@ obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
obj-$(CONFIG_ARCH_SUNXI) += allwinner/
obj-$(CONFIG_ARCH_MESON) += amlogic/
-obj-$(CONFIG_LANTIQ) += lantiq/
obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
obj-$(CONFIG_ARCH_RENESAS) += renesas/
obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
@@ -19,6 +18,7 @@ obj-y += broadcom/ \
cadence/ \
freescale/ \
hisilicon/ \
+ lantiq/ \
marvell/ \
motorola/ \
mscc/ \
diff --git a/drivers/phy/lantiq/Kconfig b/drivers/phy/lantiq/Kconfig
index eb66c857ce25..c4df9709d53f 100644
--- a/drivers/phy/lantiq/Kconfig
+++ b/drivers/phy/lantiq/Kconfig
@@ -2,6 +2,17 @@
#
# Phy drivers for Lantiq / Intel platforms
#
+config PHY_LANTIQ_VRX200_PCIE
+ tristate "Lantiq VRX200/ARX300 PCIe PHY"
+ depends on SOC_TYPE_XWAY || COMPILE_TEST
+ depends on OF && HAS_IOMEM
+ select GENERIC_PHY
+ select REGMAP_MMIO
+ help
+ Support for the PCIe PHY(s) on the Lantiq / Intel VRX200 and ARX300
+ family SoCs.
+ If unsure, say N.
+
config PHY_LANTIQ_RCU_USB2
tristate "Lantiq XWAY SoC RCU based USB PHY"
depends on OF && (SOC_TYPE_XWAY || COMPILE_TEST)
diff --git a/drivers/phy/lantiq/Makefile b/drivers/phy/lantiq/Makefile
index 540049039092..7c14eb24ab73 100644
--- a/drivers/phy/lantiq/Makefile
+++ b/drivers/phy/lantiq/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_PHY_LANTIQ_RCU_USB2) += phy-lantiq-rcu-usb2.o
+obj-$(CONFIG_PHY_LANTIQ_VRX200_PCIE) += phy-lantiq-vrx200-pcie.o
diff --git a/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c b/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c
new file mode 100644
index 000000000000..544d64a84cc0
--- /dev/null
+++ b/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c
@@ -0,0 +1,494 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PCIe PHY driver for Lantiq VRX200 and ARX300 SoCs.
+ *
+ * Copyright (C) 2019 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ *
+ * Based on the BSP (called "UGW") driver:
+ * Copyright (C) 2009-2015 Lei Chuanhua <chuanhua.lei@lantiq.com>
+ * Copyright (C) 2016 Intel Corporation
+ *
+ * TODO: PHY modes other than 36MHz (without "SSC")
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#include <dt-bindings/phy/phy-lantiq-vrx200-pcie.h>
+
+#define PCIE_PHY_PLL_CTRL1 0x44
+
+#define PCIE_PHY_PLL_CTRL2 0x46
+#define PCIE_PHY_PLL_CTRL2_CONST_SDM_MASK GENMASK(7, 0)
+#define PCIE_PHY_PLL_CTRL2_CONST_SDM_EN BIT(8)
+#define PCIE_PHY_PLL_CTRL2_PLL_SDM_EN BIT(9)
+
+#define PCIE_PHY_PLL_CTRL3 0x48
+#define PCIE_PHY_PLL_CTRL3_EXT_MMD_DIV_RATIO_EN BIT(1)
+#define PCIE_PHY_PLL_CTRL3_EXT_MMD_DIV_RATIO_MASK GENMASK(6, 4)
+
+#define PCIE_PHY_PLL_CTRL4 0x4a
+#define PCIE_PHY_PLL_CTRL5 0x4c
+#define PCIE_PHY_PLL_CTRL6 0x4e
+#define PCIE_PHY_PLL_CTRL7 0x50
+#define PCIE_PHY_PLL_A_CTRL1 0x52
+
+#define PCIE_PHY_PLL_A_CTRL2 0x54
+#define PCIE_PHY_PLL_A_CTRL2_LF_MODE_EN BIT(14)
+
+#define PCIE_PHY_PLL_A_CTRL3 0x56
+#define PCIE_PHY_PLL_A_CTRL3_MMD_MASK GENMASK(15, 13)
+
+#define PCIE_PHY_PLL_STATUS 0x58
+
+#define PCIE_PHY_TX1_CTRL1 0x60
+#define PCIE_PHY_TX1_CTRL1_FORCE_EN BIT(3)
+#define PCIE_PHY_TX1_CTRL1_LOAD_EN BIT(4)
+
+#define PCIE_PHY_TX1_CTRL2 0x62
+#define PCIE_PHY_TX1_CTRL3 0x64
+#define PCIE_PHY_TX1_A_CTRL1 0x66
+#define PCIE_PHY_TX1_A_CTRL2 0x68
+#define PCIE_PHY_TX1_MOD1 0x6a
+#define PCIE_PHY_TX1_MOD2 0x6c
+#define PCIE_PHY_TX1_MOD3 0x6e
+
+#define PCIE_PHY_TX2_CTRL1 0x70
+#define PCIE_PHY_TX2_CTRL1_LOAD_EN BIT(4)
+
+#define PCIE_PHY_TX2_CTRL2 0x72
+#define PCIE_PHY_TX2_A_CTRL1 0x76
+#define PCIE_PHY_TX2_A_CTRL2 0x78
+#define PCIE_PHY_TX2_MOD1 0x7a
+#define PCIE_PHY_TX2_MOD2 0x7c
+#define PCIE_PHY_TX2_MOD3 0x7e
+
+#define PCIE_PHY_RX1_CTRL1 0xa0
+#define PCIE_PHY_RX1_CTRL1_LOAD_EN BIT(1)
+
+#define PCIE_PHY_RX1_CTRL2 0xa2
+#define PCIE_PHY_RX1_CDR 0xa4
+#define PCIE_PHY_RX1_EI 0xa6
+#define PCIE_PHY_RX1_A_CTRL 0xaa
+
+struct ltq_vrx200_pcie_phy_priv {
+ struct phy *phy;
+ unsigned int mode;
+ struct device *dev;
+ struct regmap *phy_regmap;
+ struct regmap *rcu_regmap;
+ struct clk *pdi_clk;
+ struct clk *phy_clk;
+ struct reset_control *phy_reset;
+ struct reset_control *pcie_reset;
+ u32 rcu_ahb_endian_offset;
+ u32 rcu_ahb_endian_big_endian_mask;
+};
+
+static void ltq_vrx200_pcie_phy_common_setup(struct phy *phy)
+{
+ struct ltq_vrx200_pcie_phy_priv *priv = phy_get_drvdata(phy);
+
+ /* PLL Setting */
+ regmap_write(priv->phy_regmap, PCIE_PHY_PLL_A_CTRL1, 0x120e);
+
+ /* increase the bias reference voltage */
+ regmap_write(priv->phy_regmap, PCIE_PHY_PLL_A_CTRL2, 0x39d7);
+ regmap_write(priv->phy_regmap, PCIE_PHY_PLL_A_CTRL3, 0x0900);
+
+ /* Endcnt */
+ regmap_write(priv->phy_regmap, PCIE_PHY_RX1_EI, 0x0004);
+ regmap_write(priv->phy_regmap, PCIE_PHY_RX1_A_CTRL, 0x6803);
+
+ regmap_update_bits(priv->phy_regmap, PCIE_PHY_TX1_CTRL1,
+ PCIE_PHY_TX1_CTRL1_FORCE_EN,
+ PCIE_PHY_TX1_CTRL1_FORCE_EN);
+
+ /* predrv_ser_en */
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX1_A_CTRL2, 0x0706);
+
+ /* ctrl_lim */
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX1_CTRL3, 0x1fff);
+
+ /* ctrl */
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX1_A_CTRL1, 0x0810);
+
+ /* predrv_ser_en */
+ regmap_update_bits(priv->phy_regmap, PCIE_PHY_TX2_A_CTRL2, 0x7f00,
+ 0x4700);
+
+ /* RTERM */
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX1_CTRL2, 0x2e00);
+
+ /* Improved 100MHz clock output */
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX2_CTRL2, 0x3096);
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX2_A_CTRL2, 0x4707);
+
+ /* Reduced CDR BW to avoid glitches */
+ regmap_write(priv->phy_regmap, PCIE_PHY_RX1_CDR, 0x0235);
+}
+
+static void pcie_phy_36mhz_mode_setup(struct phy *phy)
+{
+ struct ltq_vrx200_pcie_phy_priv *priv = phy_get_drvdata(phy);
+
+ regmap_update_bits(priv->phy_regmap, PCIE_PHY_PLL_CTRL3,
+ PCIE_PHY_PLL_CTRL3_EXT_MMD_DIV_RATIO_EN, 0x0000);
+
+ regmap_update_bits(priv->phy_regmap, PCIE_PHY_PLL_CTRL3,
+ PCIE_PHY_PLL_CTRL3_EXT_MMD_DIV_RATIO_MASK, 0x0000);
+
+ regmap_update_bits(priv->phy_regmap, PCIE_PHY_PLL_CTRL2,
+ PCIE_PHY_PLL_CTRL2_PLL_SDM_EN,
+ PCIE_PHY_PLL_CTRL2_PLL_SDM_EN);
+
+ regmap_update_bits(priv->phy_regmap, PCIE_PHY_PLL_CTRL2,
+ PCIE_PHY_PLL_CTRL2_CONST_SDM_EN,
+ PCIE_PHY_PLL_CTRL2_CONST_SDM_EN);
+
+ regmap_update_bits(priv->phy_regmap, PCIE_PHY_PLL_A_CTRL3,
+ PCIE_PHY_PLL_A_CTRL3_MMD_MASK,
+ FIELD_PREP(PCIE_PHY_PLL_A_CTRL3_MMD_MASK, 0x1));
+
+ regmap_update_bits(priv->phy_regmap, PCIE_PHY_PLL_A_CTRL2,
+ PCIE_PHY_PLL_A_CTRL2_LF_MODE_EN, 0x0000);
+
+ /* const_sdm */
+ regmap_write(priv->phy_regmap, PCIE_PHY_PLL_CTRL1, 0x38e4);
+
+ regmap_update_bits(priv->phy_regmap, PCIE_PHY_PLL_CTRL2,
+ PCIE_PHY_PLL_CTRL2_CONST_SDM_MASK,
+ FIELD_PREP(PCIE_PHY_PLL_CTRL2_CONST_SDM_MASK,
+ 0xee));
+
+ /* pllmod */
+ regmap_write(priv->phy_regmap, PCIE_PHY_PLL_CTRL7, 0x0002);
+ regmap_write(priv->phy_regmap, PCIE_PHY_PLL_CTRL6, 0x3a04);
+ regmap_write(priv->phy_regmap, PCIE_PHY_PLL_CTRL5, 0xfae3);
+ regmap_write(priv->phy_regmap, PCIE_PHY_PLL_CTRL4, 0x1b72);
+}
+
+static int ltq_vrx200_pcie_phy_wait_for_pll(struct phy *phy)
+{
+ struct ltq_vrx200_pcie_phy_priv *priv = phy_get_drvdata(phy);
+ unsigned int tmp;
+ int ret;
+
+ ret = regmap_read_poll_timeout(priv->phy_regmap, PCIE_PHY_PLL_STATUS,
+ tmp, ((tmp & 0x0070) == 0x0070), 10,
+ 10000);
+ if (ret) {
+ dev_err(priv->dev, "PLL Link timeout, PLL status = 0x%04x\n",
+ tmp);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void ltq_vrx200_pcie_phy_apply_workarounds(struct phy *phy)
+{
+ struct ltq_vrx200_pcie_phy_priv *priv = phy_get_drvdata(phy);
+ static const struct reg_default slices[] = {
+ {
+ .reg = PCIE_PHY_TX1_CTRL1,
+ .def = PCIE_PHY_TX1_CTRL1_LOAD_EN,
+ },
+ {
+ .reg = PCIE_PHY_TX2_CTRL1,
+ .def = PCIE_PHY_TX2_CTRL1_LOAD_EN,
+ },
+ {
+ .reg = PCIE_PHY_RX1_CTRL1,
+ .def = PCIE_PHY_RX1_CTRL1_LOAD_EN,
+ }
+ };
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(slices); i++) {
+ /* enable load_en */
+ regmap_update_bits(priv->phy_regmap, slices[i].reg,
+ slices[i].def, slices[i].def);
+
+ udelay(1);
+
+ /* disable load_en */
+ regmap_update_bits(priv->phy_regmap, slices[i].reg,
+ slices[i].def, 0x0);
+ }
+
+ for (i = 0; i < 5; i++) {
+ /* TX2 modulation */
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX2_MOD1, 0x1ffe);
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX2_MOD2, 0xfffe);
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX2_MOD3, 0x0601);
+ usleep_range(1000, 2000);
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX2_MOD3, 0x0001);
+
+ /* TX1 modulation */
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX1_MOD1, 0x1ffe);
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX1_MOD2, 0xfffe);
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX1_MOD3, 0x0601);
+ usleep_range(1000, 2000);
+ regmap_write(priv->phy_regmap, PCIE_PHY_TX1_MOD3, 0x0001);
+ }
+}
+
+static int ltq_vrx200_pcie_phy_init(struct phy *phy)
+{
+ struct ltq_vrx200_pcie_phy_priv *priv = phy_get_drvdata(phy);
+ int ret;
+
+ if (of_device_is_big_endian(priv->dev->of_node))
+ regmap_update_bits(priv->rcu_regmap,
+ priv->rcu_ahb_endian_offset,
+ priv->rcu_ahb_endian_big_endian_mask,
+ priv->rcu_ahb_endian_big_endian_mask);
+ else
+ regmap_update_bits(priv->rcu_regmap,
+ priv->rcu_ahb_endian_offset,
+ priv->rcu_ahb_endian_big_endian_mask, 0x0);
+
+ ret = reset_control_assert(priv->phy_reset);
+ if (ret)
+ goto err;
+
+ udelay(1);
+
+ ret = reset_control_deassert(priv->phy_reset);
+ if (ret)
+ goto err;
+
+ udelay(1);
+
+ ret = reset_control_deassert(priv->pcie_reset);
+ if (ret)
+ goto err_assert_phy_reset;
+
+ /* Make sure PHY PLL is stable */
+ usleep_range(20, 40);
+
+ return 0;
+
+err_assert_phy_reset:
+ reset_control_assert(priv->phy_reset);
+err:
+ return ret;
+}
+
+static int ltq_vrx200_pcie_phy_exit(struct phy *phy)
+{
+ struct ltq_vrx200_pcie_phy_priv *priv = phy_get_drvdata(phy);
+ int ret;
+
+ ret = reset_control_assert(priv->pcie_reset);
+ if (ret)
+ return ret;
+
+ ret = reset_control_assert(priv->phy_reset);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int ltq_vrx200_pcie_phy_power_on(struct phy *phy)
+{
+ struct ltq_vrx200_pcie_phy_priv *priv = phy_get_drvdata(phy);
+ int ret;
+
+ /* Enable PDI to access PCIe PHY register */
+ ret = clk_prepare_enable(priv->pdi_clk);
+ if (ret)
+ goto err;
+
+ /* Configure PLL and PHY clock */
+ ltq_vrx200_pcie_phy_common_setup(phy);
+
+ pcie_phy_36mhz_mode_setup(phy);
+
+ /* Enable the PCIe PHY and make PLL setting take effect */
+ ret = clk_prepare_enable(priv->phy_clk);
+ if (ret)
+ goto err_disable_pdi_clk;
+
+ /* Check if we are in "startup ready" status */
+ if (ltq_vrx200_pcie_phy_wait_for_pll(phy) != 0)
+ goto err_disable_phy_clk;
+
+ ltq_vrx200_pcie_phy_apply_workarounds(phy);
+
+ return 0;
+
+err_disable_phy_clk:
+ clk_disable_unprepare(priv->phy_clk);
+err_disable_pdi_clk:
+ clk_disable_unprepare(priv->pdi_clk);
+err:
+ return ret;
+}
+
+static int ltq_vrx200_pcie_phy_power_off(struct phy *phy)
+{
+ struct ltq_vrx200_pcie_phy_priv *priv = phy_get_drvdata(phy);
+
+ clk_disable_unprepare(priv->phy_clk);
+ clk_disable_unprepare(priv->pdi_clk);
+
+ return 0;
+}
+
+static struct phy_ops ltq_vrx200_pcie_phy_ops = {
+ .init = ltq_vrx200_pcie_phy_init,
+ .exit = ltq_vrx200_pcie_phy_exit,
+ .power_on = ltq_vrx200_pcie_phy_power_on,
+ .power_off = ltq_vrx200_pcie_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static struct phy *ltq_vrx200_pcie_phy_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct ltq_vrx200_pcie_phy_priv *priv = dev_get_drvdata(dev);
+ unsigned int mode;
+
+ if (args->args_count != 1) {
+ dev_err(dev, "invalid number of arguments\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ mode = args->args[0];
+
+ switch (mode) {
+ case LANTIQ_PCIE_PHY_MODE_36MHZ:
+ priv->mode = mode;
+ break;
+
+ case LANTIQ_PCIE_PHY_MODE_25MHZ:
+ case LANTIQ_PCIE_PHY_MODE_25MHZ_SSC:
+ case LANTIQ_PCIE_PHY_MODE_36MHZ_SSC:
+ case LANTIQ_PCIE_PHY_MODE_100MHZ:
+ case LANTIQ_PCIE_PHY_MODE_100MHZ_SSC:
+ dev_err(dev, "PHY mode not implemented yet: %u\n", mode);
+ return ERR_PTR(-EINVAL);
+
+ default:
+ dev_err(dev, "invalid PHY mode %u\n", mode);
+ return ERR_PTR(-EINVAL);
+ };
+
+ return priv->phy;
+}
+
+static int ltq_vrx200_pcie_phy_probe(struct platform_device *pdev)
+{
+ static const struct regmap_config regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .reg_stride = 2,
+ .max_register = PCIE_PHY_RX1_A_CTRL,
+ };
+ struct ltq_vrx200_pcie_phy_priv *priv;
+ struct device *dev = &pdev->dev;
+ struct phy_provider *provider;
+ struct resource *res;
+ void __iomem *base;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ priv->phy_regmap = devm_regmap_init_mmio(dev, base, &regmap_config);
+ if (IS_ERR(priv->phy_regmap))
+ return PTR_ERR(priv->phy_regmap);
+
+ priv->rcu_regmap = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "lantiq,rcu");
+ if (IS_ERR(priv->rcu_regmap))
+ return PTR_ERR(priv->rcu_regmap);
+
+ ret = device_property_read_u32(dev, "lantiq,rcu-endian-offset",
+ &priv->rcu_ahb_endian_offset);
+ if (ret) {
+ dev_err(dev,
+ "failed to parse the 'lantiq,rcu-endian-offset' property\n");
+ return ret;
+ }
+
+ ret = device_property_read_u32(dev, "lantiq,rcu-big-endian-mask",
+ &priv->rcu_ahb_endian_big_endian_mask);
+ if (ret) {
+ dev_err(dev,
+ "failed to parse the 'lantiq,rcu-big-endian-mask' property\n");
+ return ret;
+ }
+
+ priv->pdi_clk = devm_clk_get(dev, "pdi");
+ if (IS_ERR(priv->pdi_clk))
+ return PTR_ERR(priv->pdi_clk);
+
+ priv->phy_clk = devm_clk_get(dev, "phy");
+ if (IS_ERR(priv->phy_clk))
+ return PTR_ERR(priv->phy_clk);
+
+ priv->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
+ if (IS_ERR(priv->phy_reset))
+ return PTR_ERR(priv->phy_reset);
+
+ priv->pcie_reset = devm_reset_control_get_shared(dev, "pcie");
+ if (IS_ERR(priv->pcie_reset))
+ return PTR_ERR(priv->pcie_reset);
+
+ priv->dev = dev;
+
+ priv->phy = devm_phy_create(dev, dev->of_node,
+ &ltq_vrx200_pcie_phy_ops);
+ if (IS_ERR(priv->phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(priv->phy);
+ }
+
+ phy_set_drvdata(priv->phy, priv);
+ dev_set_drvdata(dev, priv);
+
+ provider = devm_of_phy_provider_register(dev,
+ ltq_vrx200_pcie_phy_xlate);
+
+ return PTR_ERR_OR_ZERO(provider);
+}
+
+static const struct of_device_id ltq_vrx200_pcie_phy_of_match[] = {
+ { .compatible = "lantiq,vrx200-pcie-phy", },
+ { .compatible = "lantiq,arx300-pcie-phy", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, ltq_vrx200_pcie_phy_of_match);
+
+static struct platform_driver ltq_vrx200_pcie_phy_driver = {
+ .probe = ltq_vrx200_pcie_phy_probe,
+ .driver = {
+ .name = "ltq-vrx200-pcie-phy",
+ .of_match_table = ltq_vrx200_pcie_phy_of_match,
+ }
+};
+module_platform_driver(ltq_vrx200_pcie_phy_driver);
+
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_DESCRIPTION("Lantiq VRX200 and ARX300 PCIe PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
index 0e1642419c0b..4053ba6cd0fb 100644
--- a/drivers/phy/marvell/Kconfig
+++ b/drivers/phy/marvell/Kconfig
@@ -57,6 +57,7 @@ config PHY_MVEBU_CP110_COMPHY
tristate "Marvell CP110 comphy driver"
depends on ARCH_MVEBU || COMPILE_TEST
depends on OF
+ depends on HAVE_ARM_SMCCC
select GENERIC_PHY
help
This driver allows to control the comphy, an hardware block providing
diff --git a/drivers/phy/marvell/phy-armada38x-comphy.c b/drivers/phy/marvell/phy-armada38x-comphy.c
index 3e00bc679d4e..6960dfd8ad8c 100644
--- a/drivers/phy/marvell/phy-armada38x-comphy.c
+++ b/drivers/phy/marvell/phy-armada38x-comphy.c
@@ -200,8 +200,10 @@ static int a38x_comphy_probe(struct platform_device *pdev)
}
phy = devm_phy_create(&pdev->dev, child, &a38x_comphy_ops);
- if (IS_ERR(phy))
+ if (IS_ERR(phy)) {
+ of_node_put(child);
return PTR_ERR(phy);
+ }
priv->lane[val].base = base + 0x28 * val;
priv->lane[val].priv = priv;
diff --git a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
index 8812a104c233..1a138be8bd6a 100644
--- a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
+++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
@@ -26,6 +26,7 @@
#define COMPHY_SIP_POWER_ON 0x82000001
#define COMPHY_SIP_POWER_OFF 0x82000002
#define COMPHY_SIP_PLL_LOCK 0x82000003
+#define COMPHY_FW_NOT_SUPPORTED (-1)
#define COMPHY_FW_MODE_SATA 0x1
#define COMPHY_FW_MODE_SGMII 0x2
@@ -169,6 +170,7 @@ static int mvebu_a3700_comphy_power_on(struct phy *phy)
struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy);
u32 fw_param;
int fw_mode;
+ int ret;
fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, lane->port,
lane->mode, lane->submode);
@@ -217,7 +219,12 @@ static int mvebu_a3700_comphy_power_on(struct phy *phy)
return -ENOTSUPP;
}
- return mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_ON, lane->id, fw_param);
+ ret = mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_ON, lane->id, fw_param);
+ if (ret == COMPHY_FW_NOT_SUPPORTED)
+ dev_err(lane->dev,
+ "unsupported SMC call, try updating your firmware\n");
+
+ return ret;
}
static int mvebu_a3700_comphy_power_off(struct phy *phy)
@@ -277,13 +284,17 @@ static int mvebu_a3700_comphy_probe(struct platform_device *pdev)
}
lane = devm_kzalloc(&pdev->dev, sizeof(*lane), GFP_KERNEL);
- if (!lane)
+ if (!lane) {
+ of_node_put(child);
return -ENOMEM;
+ }
phy = devm_phy_create(&pdev->dev, child,
&mvebu_a3700_comphy_ops);
- if (IS_ERR(phy))
+ if (IS_ERR(phy)) {
+ of_node_put(child);
return PTR_ERR(phy);
+ }
lane->dev = &pdev->dev;
lane->mode = PHY_MODE_INVALID;
diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
index d98e0451f6a1..e3b87c94aaf6 100644
--- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
+++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
@@ -5,6 +5,8 @@
* Antoine Tenart <antoine.tenart@free-electrons.com>
*/
+#include <linux/arm-smccc.h>
+#include <linux/clk.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/mfd/syscon.h>
@@ -22,6 +24,7 @@
#define MVEBU_COMPHY_SERDES_CFG0_PU_RX BIT(11)
#define MVEBU_COMPHY_SERDES_CFG0_PU_TX BIT(12)
#define MVEBU_COMPHY_SERDES_CFG0_HALF_BUS BIT(14)
+#define MVEBU_COMPHY_SERDES_CFG0_RXAUI_MODE BIT(15)
#define MVEBU_COMPHY_SERDES_CFG1(n) (0x4 + (n) * 0x1000)
#define MVEBU_COMPHY_SERDES_CFG1_RESET BIT(3)
#define MVEBU_COMPHY_SERDES_CFG1_RX_INIT BIT(4)
@@ -77,8 +80,8 @@
#define MVEBU_COMPHY_TX_SLEW_RATE(n) (0x974 + (n) * 0x1000)
#define MVEBU_COMPHY_TX_SLEW_RATE_EMPH(n) ((n) << 5)
#define MVEBU_COMPHY_TX_SLEW_RATE_SLC(n) ((n) << 10)
-#define MVEBU_COMPHY_DLT_CTRL(n) (0x984 + (n) * 0x1000)
-#define MVEBU_COMPHY_DLT_CTRL_DTL_FLOOP_EN BIT(2)
+#define MVEBU_COMPHY_DTL_CTRL(n) (0x984 + (n) * 0x1000)
+#define MVEBU_COMPHY_DTL_CTRL_DTL_FLOOP_EN BIT(2)
#define MVEBU_COMPHY_FRAME_DETECT0(n) (0xa14 + (n) * 0x1000)
#define MVEBU_COMPHY_FRAME_DETECT0_PATN(n) ((n) << 7)
#define MVEBU_COMPHY_FRAME_DETECT3(n) (0xa20 + (n) * 0x1000)
@@ -111,55 +114,151 @@
#define MVEBU_COMPHY_SELECTOR_PHY(n) ((n) * 0x4)
#define MVEBU_COMPHY_PIPE_SELECTOR 0x1144
#define MVEBU_COMPHY_PIPE_SELECTOR_PIPE(n) ((n) * 0x4)
+#define MVEBU_COMPHY_SD1_CTRL1 0x1148
+#define MVEBU_COMPHY_SD1_CTRL1_RXAUI1_EN BIT(26)
+#define MVEBU_COMPHY_SD1_CTRL1_RXAUI0_EN BIT(27)
#define MVEBU_COMPHY_LANES 6
#define MVEBU_COMPHY_PORTS 3
+#define COMPHY_SIP_POWER_ON 0x82000001
+#define COMPHY_SIP_POWER_OFF 0x82000002
+#define COMPHY_FW_NOT_SUPPORTED (-1)
+
+/*
+ * A lane is described by the following bitfields:
+ * [ 1- 0]: COMPHY polarity invertion
+ * [ 2- 7]: COMPHY speed
+ * [ 5-11]: COMPHY port index
+ * [12-16]: COMPHY mode
+ * [17]: Clock source
+ * [18-20]: PCIe width (x1, x2, x4)
+ */
+#define COMPHY_FW_POL_OFFSET 0
+#define COMPHY_FW_POL_MASK GENMASK(1, 0)
+#define COMPHY_FW_SPEED_OFFSET 2
+#define COMPHY_FW_SPEED_MASK GENMASK(7, 2)
+#define COMPHY_FW_SPEED_MAX COMPHY_FW_SPEED_MASK
+#define COMPHY_FW_SPEED_1250 0
+#define COMPHY_FW_SPEED_3125 2
+#define COMPHY_FW_SPEED_5000 3
+#define COMPHY_FW_SPEED_103125 6
+#define COMPHY_FW_PORT_OFFSET 8
+#define COMPHY_FW_PORT_MASK GENMASK(11, 8)
+#define COMPHY_FW_MODE_OFFSET 12
+#define COMPHY_FW_MODE_MASK GENMASK(16, 12)
+#define COMPHY_FW_WIDTH_OFFSET 18
+#define COMPHY_FW_WIDTH_MASK GENMASK(20, 18)
+
+#define COMPHY_FW_PARAM_FULL(mode, port, speed, pol, width) \
+ ((((pol) << COMPHY_FW_POL_OFFSET) & COMPHY_FW_POL_MASK) | \
+ (((mode) << COMPHY_FW_MODE_OFFSET) & COMPHY_FW_MODE_MASK) | \
+ (((port) << COMPHY_FW_PORT_OFFSET) & COMPHY_FW_PORT_MASK) | \
+ (((speed) << COMPHY_FW_SPEED_OFFSET) & COMPHY_FW_SPEED_MASK) | \
+ (((width) << COMPHY_FW_WIDTH_OFFSET) & COMPHY_FW_WIDTH_MASK))
+
+#define COMPHY_FW_PARAM(mode, port) \
+ COMPHY_FW_PARAM_FULL(mode, port, COMPHY_FW_SPEED_MAX, 0, 0)
+
+#define COMPHY_FW_PARAM_ETH(mode, port, speed) \
+ COMPHY_FW_PARAM_FULL(mode, port, speed, 0, 0)
+
+#define COMPHY_FW_PARAM_PCIE(mode, port, width) \
+ COMPHY_FW_PARAM_FULL(mode, port, COMPHY_FW_SPEED_5000, 0, width)
+
+#define COMPHY_FW_MODE_SATA 0x1
+#define COMPHY_FW_MODE_SGMII 0x2 /* SGMII 1G */
+#define COMPHY_FW_MODE_HS_SGMII 0x3 /* SGMII 2.5G */
+#define COMPHY_FW_MODE_USB3H 0x4
+#define COMPHY_FW_MODE_USB3D 0x5
+#define COMPHY_FW_MODE_PCIE 0x6
+#define COMPHY_FW_MODE_RXAUI 0x7
+#define COMPHY_FW_MODE_XFI 0x8 /* SFI: 0x9 (is treated like XFI) */
+
struct mvebu_comphy_conf {
enum phy_mode mode;
int submode;
unsigned lane;
unsigned port;
u32 mux;
+ u32 fw_mode;
};
-#define MVEBU_COMPHY_CONF(_lane, _port, _submode, _mux) \
+#define ETH_CONF(_lane, _port, _submode, _mux, _fw) \
{ \
.lane = _lane, \
.port = _port, \
.mode = PHY_MODE_ETHERNET, \
.submode = _submode, \
.mux = _mux, \
+ .fw_mode = _fw, \
+ }
+
+#define GEN_CONF(_lane, _port, _mode, _fw) \
+ { \
+ .lane = _lane, \
+ .port = _port, \
+ .mode = _mode, \
+ .submode = PHY_INTERFACE_MODE_NA, \
+ .mux = -1, \
+ .fw_mode = _fw, \
}
static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = {
/* lane 0 */
- MVEBU_COMPHY_CONF(0, 1, PHY_INTERFACE_MODE_SGMII, 0x1),
- MVEBU_COMPHY_CONF(0, 1, PHY_INTERFACE_MODE_2500BASEX, 0x1),
+ GEN_CONF(0, 0, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE),
+ ETH_CONF(0, 1, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII),
+ ETH_CONF(0, 1, PHY_INTERFACE_MODE_2500BASEX, 0x1, COMPHY_FW_MODE_HS_SGMII),
+ GEN_CONF(0, 1, PHY_MODE_SATA, COMPHY_FW_MODE_SATA),
/* lane 1 */
- MVEBU_COMPHY_CONF(1, 2, PHY_INTERFACE_MODE_SGMII, 0x1),
- MVEBU_COMPHY_CONF(1, 2, PHY_INTERFACE_MODE_2500BASEX, 0x1),
+ GEN_CONF(1, 0, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H),
+ GEN_CONF(1, 0, PHY_MODE_USB_DEVICE_SS, COMPHY_FW_MODE_USB3D),
+ GEN_CONF(1, 0, PHY_MODE_SATA, COMPHY_FW_MODE_SATA),
+ GEN_CONF(1, 0, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE),
+ ETH_CONF(1, 2, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII),
+ ETH_CONF(1, 2, PHY_INTERFACE_MODE_2500BASEX, 0x1, COMPHY_FW_MODE_HS_SGMII),
/* lane 2 */
- MVEBU_COMPHY_CONF(2, 0, PHY_INTERFACE_MODE_SGMII, 0x1),
- MVEBU_COMPHY_CONF(2, 0, PHY_INTERFACE_MODE_2500BASEX, 0x1),
- MVEBU_COMPHY_CONF(2, 0, PHY_INTERFACE_MODE_10GKR, 0x1),
+ ETH_CONF(2, 0, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII),
+ ETH_CONF(2, 0, PHY_INTERFACE_MODE_2500BASEX, 0x1, COMPHY_FW_MODE_HS_SGMII),
+ ETH_CONF(2, 0, PHY_INTERFACE_MODE_RXAUI, 0x1, COMPHY_FW_MODE_RXAUI),
+ ETH_CONF(2, 0, PHY_INTERFACE_MODE_10GKR, 0x1, COMPHY_FW_MODE_XFI),
+ GEN_CONF(2, 0, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H),
+ GEN_CONF(2, 0, PHY_MODE_SATA, COMPHY_FW_MODE_SATA),
+ GEN_CONF(2, 0, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE),
/* lane 3 */
- MVEBU_COMPHY_CONF(3, 1, PHY_INTERFACE_MODE_SGMII, 0x2),
- MVEBU_COMPHY_CONF(3, 1, PHY_INTERFACE_MODE_2500BASEX, 0x2),
+ GEN_CONF(3, 0, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE),
+ ETH_CONF(3, 1, PHY_INTERFACE_MODE_SGMII, 0x2, COMPHY_FW_MODE_SGMII),
+ ETH_CONF(3, 1, PHY_INTERFACE_MODE_2500BASEX, 0x2, COMPHY_FW_MODE_HS_SGMII),
+ ETH_CONF(3, 1, PHY_INTERFACE_MODE_RXAUI, 0x1, COMPHY_FW_MODE_RXAUI),
+ GEN_CONF(3, 1, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H),
+ GEN_CONF(3, 1, PHY_MODE_SATA, COMPHY_FW_MODE_SATA),
/* lane 4 */
- MVEBU_COMPHY_CONF(4, 0, PHY_INTERFACE_MODE_SGMII, 0x2),
- MVEBU_COMPHY_CONF(4, 0, PHY_INTERFACE_MODE_2500BASEX, 0x2),
- MVEBU_COMPHY_CONF(4, 0, PHY_INTERFACE_MODE_10GKR, 0x2),
- MVEBU_COMPHY_CONF(4, 1, PHY_INTERFACE_MODE_SGMII, 0x1),
+ ETH_CONF(4, 0, PHY_INTERFACE_MODE_SGMII, 0x2, COMPHY_FW_MODE_SGMII),
+ ETH_CONF(4, 0, PHY_INTERFACE_MODE_2500BASEX, 0x2, COMPHY_FW_MODE_HS_SGMII),
+ ETH_CONF(4, 0, PHY_INTERFACE_MODE_10GKR, 0x2, COMPHY_FW_MODE_XFI),
+ ETH_CONF(4, 0, PHY_INTERFACE_MODE_RXAUI, 0x2, COMPHY_FW_MODE_RXAUI),
+ GEN_CONF(4, 0, PHY_MODE_USB_DEVICE_SS, COMPHY_FW_MODE_USB3D),
+ GEN_CONF(4, 1, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H),
+ GEN_CONF(4, 1, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE),
+ ETH_CONF(4, 1, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII),
+ ETH_CONF(4, 1, PHY_INTERFACE_MODE_2500BASEX, -1, COMPHY_FW_MODE_HS_SGMII),
+ ETH_CONF(4, 1, PHY_INTERFACE_MODE_10GKR, -1, COMPHY_FW_MODE_XFI),
/* lane 5 */
- MVEBU_COMPHY_CONF(5, 2, PHY_INTERFACE_MODE_SGMII, 0x1),
- MVEBU_COMPHY_CONF(5, 2, PHY_INTERFACE_MODE_2500BASEX, 0x1),
+ ETH_CONF(5, 1, PHY_INTERFACE_MODE_RXAUI, 0x2, COMPHY_FW_MODE_RXAUI),
+ GEN_CONF(5, 1, PHY_MODE_SATA, COMPHY_FW_MODE_SATA),
+ ETH_CONF(5, 2, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII),
+ ETH_CONF(5, 2, PHY_INTERFACE_MODE_2500BASEX, 0x1, COMPHY_FW_MODE_HS_SGMII),
+ GEN_CONF(5, 2, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE),
};
struct mvebu_comphy_priv {
void __iomem *base;
struct regmap *regmap;
struct device *dev;
+ struct clk *mg_domain_clk;
+ struct clk *mg_core_clk;
+ struct clk *axi_clk;
+ unsigned long cp_phys;
};
struct mvebu_comphy_lane {
@@ -170,30 +269,59 @@ struct mvebu_comphy_lane {
int port;
};
-static int mvebu_comphy_get_mux(int lane, int port,
- enum phy_mode mode, int submode)
+static int mvebu_comphy_smc(unsigned long function, unsigned long phys,
+ unsigned long lane, unsigned long mode)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(function, phys, lane, mode, 0, 0, 0, 0, &res);
+
+ return res.a0;
+}
+
+static int mvebu_comphy_get_mode(bool fw_mode, int lane, int port,
+ enum phy_mode mode, int submode)
{
int i, n = ARRAY_SIZE(mvebu_comphy_cp110_modes);
+ /* Ignore PCIe submode: it represents the width */
+ bool ignore_submode = (mode == PHY_MODE_PCIE);
+ const struct mvebu_comphy_conf *conf;
/* Unused PHY mux value is 0x0 */
if (mode == PHY_MODE_INVALID)
return 0;
for (i = 0; i < n; i++) {
- if (mvebu_comphy_cp110_modes[i].lane == lane &&
- mvebu_comphy_cp110_modes[i].port == port &&
- mvebu_comphy_cp110_modes[i].mode == mode &&
- mvebu_comphy_cp110_modes[i].submode == submode)
+ conf = &mvebu_comphy_cp110_modes[i];
+ if (conf->lane == lane &&
+ conf->port == port &&
+ conf->mode == mode &&
+ (conf->submode == submode || ignore_submode))
break;
}
if (i == n)
return -EINVAL;
- return mvebu_comphy_cp110_modes[i].mux;
+ if (fw_mode)
+ return conf->fw_mode;
+ else
+ return conf->mux;
}
-static void mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane)
+static inline int mvebu_comphy_get_mux(int lane, int port,
+ enum phy_mode mode, int submode)
+{
+ return mvebu_comphy_get_mode(false, lane, port, mode, submode);
+}
+
+static inline int mvebu_comphy_get_fw_mode(int lane, int port,
+ enum phy_mode mode, int submode)
+{
+ return mvebu_comphy_get_mode(true, lane, port, mode, submode);
+}
+
+static int mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane)
{
struct mvebu_comphy_priv *priv = lane->priv;
u32 val;
@@ -210,20 +338,61 @@ static void mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane)
MVEBU_COMPHY_SERDES_CFG0_PU_TX |
MVEBU_COMPHY_SERDES_CFG0_HALF_BUS |
MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0xf) |
- MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0xf));
- if (lane->submode == PHY_INTERFACE_MODE_10GKR)
+ MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0xf) |
+ MVEBU_COMPHY_SERDES_CFG0_RXAUI_MODE);
+
+ switch (lane->submode) {
+ case PHY_INTERFACE_MODE_10GKR:
val |= MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0xe) |
MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0xe);
- else if (lane->submode == PHY_INTERFACE_MODE_2500BASEX)
+ break;
+ case PHY_INTERFACE_MODE_RXAUI:
+ val |= MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0xb) |
+ MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0xb) |
+ MVEBU_COMPHY_SERDES_CFG0_RXAUI_MODE;
+ break;
+ case PHY_INTERFACE_MODE_2500BASEX:
val |= MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0x8) |
MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0x8) |
MVEBU_COMPHY_SERDES_CFG0_HALF_BUS;
- else if (lane->submode == PHY_INTERFACE_MODE_SGMII)
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
val |= MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0x6) |
MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0x6) |
MVEBU_COMPHY_SERDES_CFG0_HALF_BUS;
+ break;
+ default:
+ dev_err(priv->dev,
+ "unsupported comphy submode (%d) on lane %d\n",
+ lane->submode,
+ lane->id);
+ return -ENOTSUPP;
+ }
+
writel(val, priv->base + MVEBU_COMPHY_SERDES_CFG0(lane->id));
+ if (lane->submode == PHY_INTERFACE_MODE_RXAUI) {
+ regmap_read(priv->regmap, MVEBU_COMPHY_SD1_CTRL1, &val);
+
+ switch (lane->id) {
+ case 2:
+ case 3:
+ val |= MVEBU_COMPHY_SD1_CTRL1_RXAUI0_EN;
+ break;
+ case 4:
+ case 5:
+ val |= MVEBU_COMPHY_SD1_CTRL1_RXAUI1_EN;
+ break;
+ default:
+ dev_err(priv->dev,
+ "RXAUI is not supported on comphy lane %d\n",
+ lane->id);
+ return -EINVAL;
+ }
+
+ regmap_write(priv->regmap, MVEBU_COMPHY_SD1_CTRL1, val);
+ }
+
/* reset */
val = readl(priv->base + MVEBU_COMPHY_SERDES_CFG1(lane->id));
val &= ~(MVEBU_COMPHY_SERDES_CFG1_RESET |
@@ -264,6 +433,8 @@ static void mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane)
val &= ~MVEBU_COMPHY_LOOPBACK_DBUS_WIDTH(0x7);
val |= MVEBU_COMPHY_LOOPBACK_DBUS_WIDTH(0x1);
writel(val, priv->base + MVEBU_COMPHY_LOOPBACK(lane->id));
+
+ return 0;
}
static int mvebu_comphy_init_plls(struct mvebu_comphy_lane *lane)
@@ -312,17 +483,20 @@ static int mvebu_comphy_set_mode_sgmii(struct phy *phy)
struct mvebu_comphy_lane *lane = phy_get_drvdata(phy);
struct mvebu_comphy_priv *priv = lane->priv;
u32 val;
+ int err;
- mvebu_comphy_ethernet_init_reset(lane);
+ err = mvebu_comphy_ethernet_init_reset(lane);
+ if (err)
+ return err;
val = readl(priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
val &= ~MVEBU_COMPHY_RX_CTRL1_CLK8T_EN;
val |= MVEBU_COMPHY_RX_CTRL1_RXCLK2X_SEL;
writel(val, priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
- val = readl(priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
- val &= ~MVEBU_COMPHY_DLT_CTRL_DTL_FLOOP_EN;
- writel(val, priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
+ val = readl(priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id));
+ val &= ~MVEBU_COMPHY_DTL_CTRL_DTL_FLOOP_EN;
+ writel(val, priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id));
regmap_read(priv->regmap, MVEBU_COMPHY_CONF1(lane->id), &val);
val &= ~MVEBU_COMPHY_CONF1_USB_PCIE;
@@ -337,22 +511,78 @@ static int mvebu_comphy_set_mode_sgmii(struct phy *phy)
return mvebu_comphy_init_plls(lane);
}
+static int mvebu_comphy_set_mode_rxaui(struct phy *phy)
+{
+ struct mvebu_comphy_lane *lane = phy_get_drvdata(phy);
+ struct mvebu_comphy_priv *priv = lane->priv;
+ u32 val;
+ int err;
+
+ err = mvebu_comphy_ethernet_init_reset(lane);
+ if (err)
+ return err;
+
+ val = readl(priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
+ val |= MVEBU_COMPHY_RX_CTRL1_RXCLK2X_SEL |
+ MVEBU_COMPHY_RX_CTRL1_CLK8T_EN;
+ writel(val, priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
+
+ val = readl(priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id));
+ val |= MVEBU_COMPHY_DTL_CTRL_DTL_FLOOP_EN;
+ writel(val, priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id));
+
+ val = readl(priv->base + MVEBU_COMPHY_SERDES_CFG2(lane->id));
+ val |= MVEBU_COMPHY_SERDES_CFG2_DFE_EN;
+ writel(val, priv->base + MVEBU_COMPHY_SERDES_CFG2(lane->id));
+
+ val = readl(priv->base + MVEBU_COMPHY_DFE_RES(lane->id));
+ val |= MVEBU_COMPHY_DFE_RES_FORCE_GEN_TBL;
+ writel(val, priv->base + MVEBU_COMPHY_DFE_RES(lane->id));
+
+ val = readl(priv->base + MVEBU_COMPHY_GEN1_S0(lane->id));
+ val &= ~MVEBU_COMPHY_GEN1_S0_TX_EMPH(0xf);
+ val |= MVEBU_COMPHY_GEN1_S0_TX_EMPH(0xd);
+ writel(val, priv->base + MVEBU_COMPHY_GEN1_S0(lane->id));
+
+ val = readl(priv->base + MVEBU_COMPHY_GEN1_S1(lane->id));
+ val &= ~(MVEBU_COMPHY_GEN1_S1_RX_MUL_PI(0x7) |
+ MVEBU_COMPHY_GEN1_S1_RX_MUL_PF(0x7));
+ val |= MVEBU_COMPHY_GEN1_S1_RX_MUL_PI(0x1) |
+ MVEBU_COMPHY_GEN1_S1_RX_MUL_PF(0x1) |
+ MVEBU_COMPHY_GEN1_S1_RX_DFE_EN;
+ writel(val, priv->base + MVEBU_COMPHY_GEN1_S1(lane->id));
+
+ val = readl(priv->base + MVEBU_COMPHY_COEF(lane->id));
+ val &= ~(MVEBU_COMPHY_COEF_DFE_EN | MVEBU_COMPHY_COEF_DFE_CTRL);
+ writel(val, priv->base + MVEBU_COMPHY_COEF(lane->id));
+
+ val = readl(priv->base + MVEBU_COMPHY_GEN1_S4(lane->id));
+ val &= ~MVEBU_COMPHY_GEN1_S4_DFE_RES(0x3);
+ val |= MVEBU_COMPHY_GEN1_S4_DFE_RES(0x1);
+ writel(val, priv->base + MVEBU_COMPHY_GEN1_S4(lane->id));
+
+ return mvebu_comphy_init_plls(lane);
+}
+
static int mvebu_comphy_set_mode_10gkr(struct phy *phy)
{
struct mvebu_comphy_lane *lane = phy_get_drvdata(phy);
struct mvebu_comphy_priv *priv = lane->priv;
u32 val;
+ int err;
- mvebu_comphy_ethernet_init_reset(lane);
+ err = mvebu_comphy_ethernet_init_reset(lane);
+ if (err)
+ return err;
val = readl(priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
val |= MVEBU_COMPHY_RX_CTRL1_RXCLK2X_SEL |
MVEBU_COMPHY_RX_CTRL1_CLK8T_EN;
writel(val, priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
- val = readl(priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
- val |= MVEBU_COMPHY_DLT_CTRL_DTL_FLOOP_EN;
- writel(val, priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
+ val = readl(priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id));
+ val |= MVEBU_COMPHY_DTL_CTRL_DTL_FLOOP_EN;
+ writel(val, priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id));
/* Speed divider */
val = readl(priv->base + MVEBU_COMPHY_SPEED_DIV(lane->id));
@@ -476,7 +706,7 @@ static int mvebu_comphy_set_mode_10gkr(struct phy *phy)
return mvebu_comphy_init_plls(lane);
}
-static int mvebu_comphy_power_on(struct phy *phy)
+static int mvebu_comphy_power_on_legacy(struct phy *phy)
{
struct mvebu_comphy_lane *lane = phy_get_drvdata(phy);
struct mvebu_comphy_priv *priv = lane->priv;
@@ -502,6 +732,9 @@ static int mvebu_comphy_power_on(struct phy *phy)
case PHY_INTERFACE_MODE_2500BASEX:
ret = mvebu_comphy_set_mode_sgmii(phy);
break;
+ case PHY_INTERFACE_MODE_RXAUI:
+ ret = mvebu_comphy_set_mode_rxaui(phy);
+ break;
case PHY_INTERFACE_MODE_10GKR:
ret = mvebu_comphy_set_mode_10gkr(phy);
break;
@@ -517,26 +750,110 @@ static int mvebu_comphy_power_on(struct phy *phy)
return ret;
}
+static int mvebu_comphy_power_on(struct phy *phy)
+{
+ struct mvebu_comphy_lane *lane = phy_get_drvdata(phy);
+ struct mvebu_comphy_priv *priv = lane->priv;
+ int fw_mode, fw_speed;
+ u32 fw_param = 0;
+ int ret;
+
+ fw_mode = mvebu_comphy_get_fw_mode(lane->id, lane->port,
+ lane->mode, lane->submode);
+ if (fw_mode < 0)
+ goto try_legacy;
+
+ /* Try SMC flow first */
+ switch (lane->mode) {
+ case PHY_MODE_ETHERNET:
+ switch (lane->submode) {
+ case PHY_INTERFACE_MODE_RXAUI:
+ dev_dbg(priv->dev, "set lane %d to RXAUI mode\n",
+ lane->id);
+ fw_speed = 0;
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ dev_dbg(priv->dev, "set lane %d to 1000BASE-X mode\n",
+ lane->id);
+ fw_speed = COMPHY_FW_SPEED_1250;
+ break;
+ case PHY_INTERFACE_MODE_2500BASEX:
+ dev_dbg(priv->dev, "set lane %d to 2500BASE-X mode\n",
+ lane->id);
+ fw_speed = COMPHY_FW_SPEED_3125;
+ break;
+ case PHY_INTERFACE_MODE_10GKR:
+ dev_dbg(priv->dev, "set lane %d to 10G-KR mode\n",
+ lane->id);
+ fw_speed = COMPHY_FW_SPEED_103125;
+ break;
+ default:
+ dev_err(priv->dev, "unsupported Ethernet mode (%d)\n",
+ lane->submode);
+ return -ENOTSUPP;
+ }
+ fw_param = COMPHY_FW_PARAM_ETH(fw_mode, lane->port, fw_speed);
+ break;
+ case PHY_MODE_USB_HOST_SS:
+ case PHY_MODE_USB_DEVICE_SS:
+ dev_dbg(priv->dev, "set lane %d to USB3 mode\n", lane->id);
+ fw_param = COMPHY_FW_PARAM(fw_mode, lane->port);
+ break;
+ case PHY_MODE_SATA:
+ dev_dbg(priv->dev, "set lane %d to SATA mode\n", lane->id);
+ fw_param = COMPHY_FW_PARAM(fw_mode, lane->port);
+ break;
+ case PHY_MODE_PCIE:
+ dev_dbg(priv->dev, "set lane %d to PCIe mode (x%d)\n", lane->id,
+ lane->submode);
+ fw_param = COMPHY_FW_PARAM_PCIE(fw_mode, lane->port,
+ lane->submode);
+ break;
+ default:
+ dev_err(priv->dev, "unsupported PHY mode (%d)\n", lane->mode);
+ return -ENOTSUPP;
+ }
+
+ ret = mvebu_comphy_smc(COMPHY_SIP_POWER_ON, priv->cp_phys, lane->id,
+ fw_param);
+ if (!ret)
+ return ret;
+
+ if (ret == COMPHY_FW_NOT_SUPPORTED)
+ dev_err(priv->dev,
+ "unsupported SMC call, try updating your firmware\n");
+
+ dev_warn(priv->dev,
+ "Firmware could not configure PHY %d with mode %d (ret: %d), trying legacy method\n",
+ lane->id, lane->mode, ret);
+
+try_legacy:
+ /* Fallback to Linux's implementation */
+ return mvebu_comphy_power_on_legacy(phy);
+}
+
static int mvebu_comphy_set_mode(struct phy *phy,
enum phy_mode mode, int submode)
{
struct mvebu_comphy_lane *lane = phy_get_drvdata(phy);
- if (mode != PHY_MODE_ETHERNET)
- return -EINVAL;
-
if (submode == PHY_INTERFACE_MODE_1000BASEX)
submode = PHY_INTERFACE_MODE_SGMII;
- if (mvebu_comphy_get_mux(lane->id, lane->port, mode, submode) < 0)
+ if (mvebu_comphy_get_fw_mode(lane->id, lane->port, mode, submode) < 0)
return -EINVAL;
lane->mode = mode;
lane->submode = submode;
+
+ /* PCIe submode represents the width */
+ if (mode == PHY_MODE_PCIE && !lane->submode)
+ lane->submode = 1;
+
return 0;
}
-static int mvebu_comphy_power_off(struct phy *phy)
+static int mvebu_comphy_power_off_legacy(struct phy *phy)
{
struct mvebu_comphy_lane *lane = phy_get_drvdata(phy);
struct mvebu_comphy_priv *priv = lane->priv;
@@ -559,6 +876,21 @@ static int mvebu_comphy_power_off(struct phy *phy)
return 0;
}
+static int mvebu_comphy_power_off(struct phy *phy)
+{
+ struct mvebu_comphy_lane *lane = phy_get_drvdata(phy);
+ struct mvebu_comphy_priv *priv = lane->priv;
+ int ret;
+
+ ret = mvebu_comphy_smc(COMPHY_SIP_POWER_OFF, priv->cp_phys,
+ lane->id, 0);
+ if (!ret)
+ return ret;
+
+ /* Fallback to Linux's implementation */
+ return mvebu_comphy_power_off_legacy(phy);
+}
+
static const struct phy_ops mvebu_comphy_ops = {
.power_on = mvebu_comphy_power_on,
.power_off = mvebu_comphy_power_off,
@@ -585,12 +917,72 @@ static struct phy *mvebu_comphy_xlate(struct device *dev,
return phy;
}
+static int mvebu_comphy_init_clks(struct mvebu_comphy_priv *priv)
+{
+ int ret;
+
+ priv->mg_domain_clk = devm_clk_get(priv->dev, "mg_clk");
+ if (IS_ERR(priv->mg_domain_clk))
+ return PTR_ERR(priv->mg_domain_clk);
+
+ ret = clk_prepare_enable(priv->mg_domain_clk);
+ if (ret < 0)
+ return ret;
+
+ priv->mg_core_clk = devm_clk_get(priv->dev, "mg_core_clk");
+ if (IS_ERR(priv->mg_core_clk)) {
+ ret = PTR_ERR(priv->mg_core_clk);
+ goto dis_mg_domain_clk;
+ }
+
+ ret = clk_prepare_enable(priv->mg_core_clk);
+ if (ret < 0)
+ goto dis_mg_domain_clk;
+
+ priv->axi_clk = devm_clk_get(priv->dev, "axi_clk");
+ if (IS_ERR(priv->axi_clk)) {
+ ret = PTR_ERR(priv->axi_clk);
+ goto dis_mg_core_clk;
+ }
+
+ ret = clk_prepare_enable(priv->axi_clk);
+ if (ret < 0)
+ goto dis_mg_core_clk;
+
+ return 0;
+
+dis_mg_core_clk:
+ clk_disable_unprepare(priv->mg_core_clk);
+
+dis_mg_domain_clk:
+ clk_disable_unprepare(priv->mg_domain_clk);
+
+ priv->mg_domain_clk = NULL;
+ priv->mg_core_clk = NULL;
+ priv->axi_clk = NULL;
+
+ return ret;
+};
+
+static void mvebu_comphy_disable_unprepare_clks(struct mvebu_comphy_priv *priv)
+{
+ if (priv->axi_clk)
+ clk_disable_unprepare(priv->axi_clk);
+
+ if (priv->mg_core_clk)
+ clk_disable_unprepare(priv->mg_core_clk);
+
+ if (priv->mg_domain_clk)
+ clk_disable_unprepare(priv->mg_domain_clk);
+}
+
static int mvebu_comphy_probe(struct platform_device *pdev)
{
struct mvebu_comphy_priv *priv;
struct phy_provider *provider;
struct device_node *child;
struct resource *res;
+ int ret;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -607,10 +999,26 @@ static int mvebu_comphy_probe(struct platform_device *pdev)
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
+ /*
+ * Ignore error if clocks have not been initialized properly for DT
+ * compatibility reasons.
+ */
+ ret = mvebu_comphy_init_clks(priv);
+ if (ret) {
+ if (ret == -EPROBE_DEFER)
+ return ret;
+ dev_warn(&pdev->dev, "cannot initialize clocks\n");
+ }
+
+ /*
+ * Hack to retrieve a physical offset relative to this CP that will be
+ * given to the firmware
+ */
+ priv->cp_phys = res->start;
+
for_each_available_child_of_node(pdev->dev.of_node, child) {
struct mvebu_comphy_lane *lane;
struct phy *phy;
- int ret;
u32 val;
ret = of_property_read_u32(child, "reg", &val);
@@ -626,30 +1034,45 @@ static int mvebu_comphy_probe(struct platform_device *pdev)
}
lane = devm_kzalloc(&pdev->dev, sizeof(*lane), GFP_KERNEL);
- if (!lane)
- return -ENOMEM;
+ if (!lane) {
+ of_node_put(child);
+ ret = -ENOMEM;
+ goto disable_clks;
+ }
phy = devm_phy_create(&pdev->dev, child, &mvebu_comphy_ops);
- if (IS_ERR(phy))
- return PTR_ERR(phy);
+ if (IS_ERR(phy)) {
+ of_node_put(child);
+ ret = PTR_ERR(phy);
+ goto disable_clks;
+ }
lane->priv = priv;
lane->mode = PHY_MODE_INVALID;
+ lane->submode = PHY_INTERFACE_MODE_NA;
lane->id = val;
lane->port = -1;
phy_set_drvdata(phy, lane);
/*
- * Once all modes are supported in this driver we should call
+ * All modes are supported in this driver so we could call
* mvebu_comphy_power_off(phy) here to avoid relying on the
- * bootloader/firmware configuration.
+ * bootloader/firmware configuration, but for compatibility
+ * reasons we cannot de-configure the COMPHY without being sure
+ * that the firmware is up-to-date and fully-featured.
*/
}
dev_set_drvdata(&pdev->dev, priv);
provider = devm_of_phy_provider_register(&pdev->dev,
mvebu_comphy_xlate);
+
return PTR_ERR_OR_ZERO(provider);
+
+disable_clks:
+ mvebu_comphy_disable_unprepare_clks(priv);
+
+ return ret;
}
static const struct of_device_id mvebu_comphy_of_match_table[] = {
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index e3880c4a15f2..b04f4fe85ac2 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -394,6 +394,16 @@ int phy_reset(struct phy *phy)
}
EXPORT_SYMBOL_GPL(phy_reset);
+/**
+ * phy_calibrate() - Tunes the phy hw parameters for current configuration
+ * @phy: the phy returned by phy_get()
+ *
+ * Used to calibrate phy hardware, typically by adjusting some parameters in
+ * runtime, which are otherwise lost after host controller reset and cannot
+ * be applied in phy_init() or phy_power_on().
+ *
+ * Returns: 0 if successful, an negative error code otherwise
+ */
int phy_calibrate(struct phy *phy)
{
int ret;
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 34ff6434da8f..39e8deb8001e 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -35,7 +35,7 @@
#define PLL_READY_GATE_EN BIT(3)
/* QPHY_PCS_STATUS bit */
#define PHYSTATUS BIT(6)
-/* QPHY_COM_PCS_READY_STATUS bit */
+/* QPHY_PCS_READY_STATUS & QPHY_COM_PCS_READY_STATUS bit */
#define PCS_READY BIT(0)
/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
@@ -115,6 +115,7 @@ enum qphy_reg_layout {
QPHY_SW_RESET,
QPHY_START_CTRL,
QPHY_PCS_READY_STATUS,
+ QPHY_PCS_STATUS,
QPHY_PCS_AUTONOMOUS_MODE_CTRL,
QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR,
QPHY_PCS_LFPS_RXTERM_IRQ_STATUS,
@@ -133,7 +134,7 @@ static const unsigned int pciephy_regs_layout[] = {
[QPHY_FLL_MAN_CODE] = 0xd4,
[QPHY_SW_RESET] = 0x00,
[QPHY_START_CTRL] = 0x08,
- [QPHY_PCS_READY_STATUS] = 0x174,
+ [QPHY_PCS_STATUS] = 0x174,
};
static const unsigned int usb3phy_regs_layout[] = {
@@ -144,7 +145,7 @@ static const unsigned int usb3phy_regs_layout[] = {
[QPHY_FLL_MAN_CODE] = 0xd0,
[QPHY_SW_RESET] = 0x00,
[QPHY_START_CTRL] = 0x08,
- [QPHY_PCS_READY_STATUS] = 0x17c,
+ [QPHY_PCS_STATUS] = 0x17c,
[QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d4,
[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0d8,
[QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x178,
@@ -153,7 +154,7 @@ static const unsigned int usb3phy_regs_layout[] = {
static const unsigned int qmp_v3_usb3phy_regs_layout[] = {
[QPHY_SW_RESET] = 0x00,
[QPHY_START_CTRL] = 0x08,
- [QPHY_PCS_READY_STATUS] = 0x174,
+ [QPHY_PCS_STATUS] = 0x174,
[QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d8,
[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0dc,
[QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
@@ -911,7 +912,6 @@ struct qmp_phy_cfg {
unsigned int start_ctrl;
unsigned int pwrdn_ctrl;
- unsigned int mask_pcs_ready;
unsigned int mask_com_pcs_ready;
/* true, if PHY has a separate PHY_COM control block */
@@ -1074,7 +1074,6 @@ static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
.start_ctrl = PCS_START | PLL_READY_GATE_EN,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
- .mask_pcs_ready = PHYSTATUS,
.mask_com_pcs_ready = PCS_READY,
.has_phy_com_ctrl = true,
@@ -1106,7 +1105,6 @@ static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
- .mask_pcs_ready = PHYSTATUS,
};
/* list of resets */
@@ -1136,7 +1134,6 @@ static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
- .mask_pcs_ready = PHYSTATUS,
.has_phy_com_ctrl = false,
.has_lane_rst = false,
@@ -1167,7 +1164,6 @@ static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
- .mask_pcs_ready = PHYSTATUS,
.has_pwrdn_delay = true,
.pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
@@ -1199,7 +1195,6 @@ static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
- .mask_pcs_ready = PHYSTATUS,
.has_pwrdn_delay = true,
.pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
@@ -1226,7 +1221,6 @@ static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
.start_ctrl = SERDES_START,
.pwrdn_ctrl = SW_PWRDN,
- .mask_pcs_ready = PCS_READY,
.is_dual_lane_phy = true,
.no_pcs_sw_reset = true,
@@ -1254,7 +1248,6 @@ static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
- .mask_pcs_ready = PHYSTATUS,
};
static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
@@ -1279,7 +1272,6 @@ static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
- .mask_pcs_ready = PHYSTATUS,
.is_dual_lane_phy = true,
};
@@ -1457,7 +1449,7 @@ static int qcom_qmp_phy_enable(struct phy *phy)
void __iomem *pcs = qphy->pcs;
void __iomem *dp_com = qmp->dp_com;
void __iomem *status;
- unsigned int mask, val;
+ unsigned int mask, val, ready;
int ret;
dev_vdbg(qmp->dev, "Initializing QMP phy\n");
@@ -1545,10 +1537,17 @@ static int qcom_qmp_phy_enable(struct phy *phy)
/* start SerDes and Phy-Coding-Sublayer */
qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
- status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
- mask = cfg->mask_pcs_ready;
+ if (cfg->type == PHY_TYPE_UFS) {
+ status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
+ mask = PCS_READY;
+ ready = PCS_READY;
+ } else {
+ status = pcs + cfg->regs[QPHY_PCS_STATUS];
+ mask = PHYSTATUS;
+ ready = 0;
+ }
- ret = readl_poll_timeout(status, val, val & mask, 10,
+ ret = readl_poll_timeout(status, val, (val & mask) == ready, 10,
PHY_INIT_COMPLETE_TIMEOUT);
if (ret) {
dev_err(qmp->dev, "phy initialization timed-out\n");
@@ -2093,8 +2092,7 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev)
if (ret) {
dev_err(dev, "failed to create lane%d phy, %d\n",
id, ret);
- pm_runtime_disable(dev);
- return ret;
+ goto err_node_put;
}
/*
@@ -2105,8 +2103,7 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev)
if (ret) {
dev_err(qmp->dev,
"failed to register pipe clock source\n");
- pm_runtime_disable(dev);
- return ret;
+ goto err_node_put;
}
id++;
}
@@ -2118,6 +2115,11 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev)
pm_runtime_disable(dev);
return PTR_ERR_OR_ZERO(phy_provider);
+
+err_node_put:
+ pm_runtime_disable(dev);
+ of_node_put(child);
+ return ret;
}
static struct platform_driver qcom_qmp_phy_driver = {
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index 8ffba67568ec..b7f6b1324395 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -61,6 +61,7 @@
USB2_OBINT_IDDIGCHG)
/* VBCTRL */
+#define USB2_VBCTRL_OCCLREN BIT(16)
#define USB2_VBCTRL_DRVVBUSSEL BIT(8)
/* LINECTRL1 */
@@ -374,6 +375,7 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
writel(val, usb2_base + USB2_LINECTRL1);
val = readl(usb2_base + USB2_VBCTRL);
+ val &= ~USB2_VBCTRL_OCCLREN;
writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL);
val = readl(usb2_base + USB2_ADPCTRL);
writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL);
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
index b10a84cab4a7..2b97fb1185a0 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
@@ -198,7 +198,7 @@
#define RK3328_BYPASS_TERM_RESISTOR_CALIB BIT(7)
#define RK3328_TERM_RESISTOR_CALIB_SPEED_14_8(x) UPDATE((x) >> 8, 6, 0)
/* REG:0xc6 */
-#define RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(x) UPDATE(x, 7, 9)
+#define RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(x) UPDATE(x, 7, 0)
/* REG:0xc7 */
#define RK3328_TERM_RESISTOR_50 UPDATE(0, 2, 1)
#define RK3328_TERM_RESISTOR_62_5 UPDATE(1, 2, 1)
diff --git a/drivers/phy/samsung/phy-exynos-dp-video.c b/drivers/phy/samsung/phy-exynos-dp-video.c
index aebd216dcf2f..6c607df1dc9a 100644
--- a/drivers/phy/samsung/phy-exynos-dp-video.c
+++ b/drivers/phy/samsung/phy-exynos-dp-video.c
@@ -109,6 +109,7 @@ static struct platform_driver exynos_dp_video_phy_driver = {
.driver = {
.name = "exynos-dp-video-phy",
.of_match_table = exynos_dp_video_phy_of_match,
+ .suppress_bind_attrs = true,
}
};
module_platform_driver(exynos_dp_video_phy_driver);
diff --git a/drivers/phy/samsung/phy-exynos-mipi-video.c b/drivers/phy/samsung/phy-exynos-mipi-video.c
index 3784bf100b95..bb51195f189f 100644
--- a/drivers/phy/samsung/phy-exynos-mipi-video.c
+++ b/drivers/phy/samsung/phy-exynos-mipi-video.c
@@ -359,6 +359,7 @@ static struct platform_driver exynos_mipi_video_phy_driver = {
.driver = {
.of_match_table = exynos_mipi_video_phy_of_match,
.name = "exynos-mipi-video-phy",
+ .suppress_bind_attrs = true,
}
};
module_platform_driver(exynos_mipi_video_phy_driver);
diff --git a/drivers/phy/samsung/phy-exynos-pcie.c b/drivers/phy/samsung/phy-exynos-pcie.c
index 1b4ba8bdb43c..659e7ae0a6cf 100644
--- a/drivers/phy/samsung/phy-exynos-pcie.c
+++ b/drivers/phy/samsung/phy-exynos-pcie.c
@@ -272,6 +272,7 @@ static struct platform_driver exynos_pcie_phy_driver = {
.driver = {
.of_match_table = exynos_pcie_phy_match,
.name = "exynos_pcie_phy",
+ .suppress_bind_attrs = true,
}
};
diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
index 646259bee909..e510732afb8b 100644
--- a/drivers/phy/samsung/phy-exynos5-usbdrd.c
+++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
@@ -953,6 +953,7 @@ static struct platform_driver exynos5_usb3drd_phy = {
.driver = {
.of_match_table = exynos5_usbdrd_phy_of_match,
.name = "exynos5_usb3drd_phy",
+ .suppress_bind_attrs = true,
}
};
diff --git a/drivers/phy/samsung/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c
index 9e5fc126032c..4dd7324d91b2 100644
--- a/drivers/phy/samsung/phy-exynos5250-sata.c
+++ b/drivers/phy/samsung/phy-exynos5250-sata.c
@@ -237,6 +237,7 @@ static struct platform_driver exynos_sata_phy_driver = {
.driver = {
.of_match_table = exynos_sata_phy_of_match,
.name = "samsung,sata-phy",
+ .suppress_bind_attrs = true,
}
};
module_platform_driver(exynos_sata_phy_driver);
diff --git a/drivers/phy/samsung/phy-samsung-usb2.c b/drivers/phy/samsung/phy-samsung-usb2.c
index 6c82f4fbe8a2..090aa02e02de 100644
--- a/drivers/phy/samsung/phy-samsung-usb2.c
+++ b/drivers/phy/samsung/phy-samsung-usb2.c
@@ -250,6 +250,7 @@ static struct platform_driver samsung_usb2_phy_driver = {
.driver = {
.of_match_table = samsung_usb2_phy_of_match,
.name = "samsung-usb2-phy",
+ .suppress_bind_attrs = true,
}
};
diff --git a/drivers/phy/ti/phy-am654-serdes.c b/drivers/phy/ti/phy-am654-serdes.c
index f8edd0840fa2..f14f1f053a75 100644
--- a/drivers/phy/ti/phy-am654-serdes.c
+++ b/drivers/phy/ti/phy-am654-serdes.c
@@ -405,6 +405,7 @@ static int serdes_am654_clk_register(struct serdes_am654 *am654_phy,
const __be32 *addr;
unsigned int reg;
struct clk *clk;
+ int ret = 0;
mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
if (!mux)
@@ -413,34 +414,40 @@ static int serdes_am654_clk_register(struct serdes_am654 *am654_phy,
init = &mux->clk_data;
regmap_node = of_parse_phandle(node, "ti,serdes-clk", 0);
- of_node_put(regmap_node);
if (!regmap_node) {
dev_err(dev, "Fail to get serdes-clk node\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto out_put_node;
}
regmap = syscon_node_to_regmap(regmap_node->parent);
if (IS_ERR(regmap)) {
dev_err(dev, "Fail to get Syscon regmap\n");
- return PTR_ERR(regmap);
+ ret = PTR_ERR(regmap);
+ goto out_put_node;
}
num_parents = of_clk_get_parent_count(node);
if (num_parents < 2) {
dev_err(dev, "SERDES clock must have parents\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto out_put_node;
}
parent_names = devm_kzalloc(dev, (sizeof(char *) * num_parents),
GFP_KERNEL);
- if (!parent_names)
- return -ENOMEM;
+ if (!parent_names) {
+ ret = -ENOMEM;
+ goto out_put_node;
+ }
of_clk_parent_fill(node, parent_names, num_parents);
addr = of_get_address(regmap_node, 0, NULL, NULL);
- if (!addr)
- return -EINVAL;
+ if (!addr) {
+ ret = -EINVAL;
+ goto out_put_node;
+ }
reg = be32_to_cpu(*addr);
@@ -456,12 +463,16 @@ static int serdes_am654_clk_register(struct serdes_am654 *am654_phy,
mux->hw.init = init;
clk = devm_clk_register(dev, &mux->hw);
- if (IS_ERR(clk))
- return PTR_ERR(clk);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ goto out_put_node;
+ }
am654_phy->clks[clock_num] = clk;
- return 0;
+out_put_node:
+ of_node_put(regmap_node);
+ return ret;
}
static const struct of_device_id serdes_am654_id_table[] = {
diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c
index f3585777324c..29fbab55c3b3 100644
--- a/drivers/slimbus/qcom-ngd-ctrl.c
+++ b/drivers/slimbus/qcom-ngd-ctrl.c
@@ -1338,12 +1338,15 @@ static int of_qcom_slim_ngd_register(struct device *parent,
continue;
ngd = kzalloc(sizeof(*ngd), GFP_KERNEL);
- if (!ngd)
+ if (!ngd) {
+ of_node_put(node);
return -ENOMEM;
+ }
ngd->pdev = platform_device_alloc(QCOM_SLIM_NGD_DRV_NAME, id);
if (!ngd->pdev) {
kfree(ngd);
+ of_node_put(node);
return -ENOMEM;
}
ngd->id = id;
diff --git a/drivers/slimbus/slimbus.h b/drivers/slimbus/slimbus.h
index 9be41089edde..b2f013bfe42e 100644
--- a/drivers/slimbus/slimbus.h
+++ b/drivers/slimbus/slimbus.h
@@ -439,7 +439,7 @@ static inline bool slim_tid_txn(u8 mt, u8 mc)
(mc == SLIM_MSG_MC_REQUEST_INFORMATION ||
mc == SLIM_MSG_MC_REQUEST_CLEAR_INFORMATION ||
mc == SLIM_MSG_MC_REQUEST_VALUE ||
- mc == SLIM_MSG_MC_REQUEST_CLEAR_INFORMATION));
+ mc == SLIM_MSG_MC_REQUEST_CHANGE_VALUE));
}
static inline bool slim_ec_txn(u8 mt, u8 mc)
diff --git a/drivers/thunderbolt/Makefile b/drivers/thunderbolt/Makefile
index 3f55cb3c81b2..001187c577bf 100644
--- a/drivers/thunderbolt/Makefile
+++ b/drivers/thunderbolt/Makefile
@@ -1,4 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-${CONFIG_THUNDERBOLT} := thunderbolt.o
-thunderbolt-objs := nhi.o ctl.o tb.o switch.o cap.o path.o tunnel.o eeprom.o
+thunderbolt-objs := nhi.o nhi_ops.o ctl.o tb.o switch.o cap.o path.o tunnel.o eeprom.o
thunderbolt-objs += domain.o dma_port.o icm.o property.o xdomain.o lc.o
diff --git a/drivers/thunderbolt/ctl.c b/drivers/thunderbolt/ctl.c
index 2427d73be731..2ec1af8f7968 100644
--- a/drivers/thunderbolt/ctl.c
+++ b/drivers/thunderbolt/ctl.c
@@ -930,6 +930,23 @@ struct tb_cfg_result tb_cfg_write_raw(struct tb_ctl *ctl, const void *buffer,
return res;
}
+static int tb_cfg_get_error(struct tb_ctl *ctl, enum tb_cfg_space space,
+ const struct tb_cfg_result *res)
+{
+ /*
+ * For unimplemented ports access to port config space may return
+ * TB_CFG_ERROR_INVALID_CONFIG_SPACE (alternatively their type is
+ * set to TB_TYPE_INACTIVE). In the former case return -ENODEV so
+ * that the caller can mark the port as disabled.
+ */
+ if (space == TB_CFG_PORT &&
+ res->tb_error == TB_CFG_ERROR_INVALID_CONFIG_SPACE)
+ return -ENODEV;
+
+ tb_cfg_print_error(ctl, res);
+ return -EIO;
+}
+
int tb_cfg_read(struct tb_ctl *ctl, void *buffer, u64 route, u32 port,
enum tb_cfg_space space, u32 offset, u32 length)
{
@@ -942,8 +959,7 @@ int tb_cfg_read(struct tb_ctl *ctl, void *buffer, u64 route, u32 port,
case 1:
/* Thunderbolt error, tb_error holds the actual number */
- tb_cfg_print_error(ctl, &res);
- return -EIO;
+ return tb_cfg_get_error(ctl, space, &res);
case -ETIMEDOUT:
tb_ctl_warn(ctl, "timeout reading config space %u from %#x\n",
@@ -969,8 +985,7 @@ int tb_cfg_write(struct tb_ctl *ctl, const void *buffer, u64 route, u32 port,
case 1:
/* Thunderbolt error, tb_error holds the actual number */
- tb_cfg_print_error(ctl, &res);
- return -EIO;
+ return tb_cfg_get_error(ctl, space, &res);
case -ETIMEDOUT:
tb_ctl_warn(ctl, "timeout writing config space %u to %#x\n",
diff --git a/drivers/thunderbolt/eeprom.c b/drivers/thunderbolt/eeprom.c
index 81e8ac4c5805..ee5196479854 100644
--- a/drivers/thunderbolt/eeprom.c
+++ b/drivers/thunderbolt/eeprom.c
@@ -414,7 +414,7 @@ static int tb_drom_copy_efi(struct tb_switch *sw, u16 *size)
struct device *dev = &sw->tb->nhi->pdev->dev;
int len, res;
- len = device_property_read_u8_array(dev, "ThunderboltDROM", NULL, 0);
+ len = device_property_count_u8(dev, "ThunderboltDROM");
if (len < 0 || len < sizeof(struct tb_drom_header))
return -EINVAL;
@@ -525,10 +525,6 @@ int tb_drom_read(struct tb_switch *sw)
sw->ports[3].dual_link_port = &sw->ports[4];
sw->ports[4].dual_link_port = &sw->ports[3];
- /* Port 5 is inaccessible on this gen 1 controller */
- if (sw->config.device_id == PCI_DEVICE_ID_INTEL_LIGHT_RIDGE)
- sw->ports[5].disabled = true;
-
return 0;
}
diff --git a/drivers/thunderbolt/icm.c b/drivers/thunderbolt/icm.c
index fbdcef56a676..245588f691e7 100644
--- a/drivers/thunderbolt/icm.c
+++ b/drivers/thunderbolt/icm.c
@@ -55,16 +55,20 @@
* @safe_mode: ICM is in safe mode
* @max_boot_acl: Maximum number of preboot ACL entries (%0 if not supported)
* @rpm: Does the controller support runtime PM (RTD3)
+ * @can_upgrade_nvm: Can the NVM firmware be upgrade on this controller
+ * @veto: Is RTD3 veto in effect
* @is_supported: Checks if we can support ICM on this controller
* @cio_reset: Trigger CIO reset
* @get_mode: Read and return the ICM firmware mode (optional)
* @get_route: Find a route string for given switch
* @save_devices: Ask ICM to save devices to ACL when suspending (optional)
* @driver_ready: Send driver ready message to ICM
+ * @set_uuid: Set UUID for the root switch (optional)
* @device_connected: Handle device connected ICM message
* @device_disconnected: Handle device disconnected ICM message
* @xdomain_connected - Handle XDomain connected ICM message
* @xdomain_disconnected - Handle XDomain disconnected ICM message
+ * @rtd3_veto: Handle RTD3 veto notification ICM message
*/
struct icm {
struct mutex request_lock;
@@ -74,6 +78,8 @@ struct icm {
int vnd_cap;
bool safe_mode;
bool rpm;
+ bool can_upgrade_nvm;
+ bool veto;
bool (*is_supported)(struct tb *tb);
int (*cio_reset)(struct tb *tb);
int (*get_mode)(struct tb *tb);
@@ -82,6 +88,7 @@ struct icm {
int (*driver_ready)(struct tb *tb,
enum tb_security_level *security_level,
size_t *nboot_acl, bool *rpm);
+ void (*set_uuid)(struct tb *tb);
void (*device_connected)(struct tb *tb,
const struct icm_pkg_header *hdr);
void (*device_disconnected)(struct tb *tb,
@@ -90,6 +97,7 @@ struct icm {
const struct icm_pkg_header *hdr);
void (*xdomain_disconnected)(struct tb *tb,
const struct icm_pkg_header *hdr);
+ void (*rtd3_veto)(struct tb *tb, const struct icm_pkg_header *hdr);
};
struct icm_notification {
@@ -294,6 +302,43 @@ static int icm_request(struct tb *tb, const void *request, size_t request_size,
return -ETIMEDOUT;
}
+/*
+ * If rescan is queued to run (we are resuming), postpone it to give the
+ * firmware some more time to send device connected notifications for next
+ * devices in the chain.
+ */
+static void icm_postpone_rescan(struct tb *tb)
+{
+ struct icm *icm = tb_priv(tb);
+
+ if (delayed_work_pending(&icm->rescan_work))
+ mod_delayed_work(tb->wq, &icm->rescan_work,
+ msecs_to_jiffies(500));
+}
+
+static void icm_veto_begin(struct tb *tb)
+{
+ struct icm *icm = tb_priv(tb);
+
+ if (!icm->veto) {
+ icm->veto = true;
+ /* Keep the domain powered while veto is in effect */
+ pm_runtime_get(&tb->dev);
+ }
+}
+
+static void icm_veto_end(struct tb *tb)
+{
+ struct icm *icm = tb_priv(tb);
+
+ if (icm->veto) {
+ icm->veto = false;
+ /* Allow the domain suspend now */
+ pm_runtime_mark_last_busy(&tb->dev);
+ pm_runtime_put_autosuspend(&tb->dev);
+ }
+}
+
static bool icm_fr_is_supported(struct tb *tb)
{
return !x86_apple_machine;
@@ -517,14 +562,16 @@ static int icm_fr_disconnect_xdomain_paths(struct tb *tb, struct tb_xdomain *xd)
return 0;
}
-static void add_switch(struct tb_switch *parent_sw, u64 route,
- const uuid_t *uuid, const u8 *ep_name,
- size_t ep_name_size, u8 connection_id, u8 connection_key,
- u8 link, u8 depth, enum tb_security_level security_level,
- bool authorized, bool boot)
+static struct tb_switch *add_switch(struct tb_switch *parent_sw, u64 route,
+ const uuid_t *uuid, const u8 *ep_name,
+ size_t ep_name_size, u8 connection_id,
+ u8 connection_key, u8 link, u8 depth,
+ enum tb_security_level security_level,
+ bool authorized, bool boot)
{
const struct intel_vss *vss;
struct tb_switch *sw;
+ int ret;
pm_runtime_get_sync(&parent_sw->dev);
@@ -555,14 +602,18 @@ static void add_switch(struct tb_switch *parent_sw, u64 route,
tb_port_at(route, parent_sw)->remote = tb_upstream_port(sw);
tb_upstream_port(sw)->remote = tb_port_at(route, parent_sw);
- if (tb_switch_add(sw)) {
+ ret = tb_switch_add(sw);
+ if (ret) {
tb_port_at(tb_route(sw), parent_sw)->remote = NULL;
tb_switch_put(sw);
+ sw = ERR_PTR(ret);
}
out:
pm_runtime_mark_last_busy(&parent_sw->dev);
pm_runtime_put_autosuspend(&parent_sw->dev);
+
+ return sw;
}
static void update_switch(struct tb_switch *parent_sw, struct tb_switch *sw,
@@ -654,6 +705,8 @@ icm_fr_device_connected(struct tb *tb, const struct icm_pkg_header *hdr)
u64 route;
int ret;
+ icm_postpone_rescan(tb);
+
link = pkg->link_info & ICM_LINK_INFO_LINK_MASK;
depth = (pkg->link_info & ICM_LINK_INFO_DEPTH_MASK) >>
ICM_LINK_INFO_DEPTH_SHIFT;
@@ -1084,7 +1137,8 @@ static int icm_tr_disconnect_xdomain_paths(struct tb *tb, struct tb_xdomain *xd)
}
static void
-icm_tr_device_connected(struct tb *tb, const struct icm_pkg_header *hdr)
+__icm_tr_device_connected(struct tb *tb, const struct icm_pkg_header *hdr,
+ bool force_rtd3)
{
const struct icm_tr_event_device_connected *pkg =
(const struct icm_tr_event_device_connected *)hdr;
@@ -1094,6 +1148,8 @@ icm_tr_device_connected(struct tb *tb, const struct icm_pkg_header *hdr)
bool authorized, boot;
u64 route;
+ icm_postpone_rescan(tb);
+
/*
* Currently we don't use the QoS information coming with the
* device connected message so simply just ignore that extra
@@ -1149,14 +1205,22 @@ icm_tr_device_connected(struct tb *tb, const struct icm_pkg_header *hdr)
return;
}
- add_switch(parent_sw, route, &pkg->ep_uuid, (const u8 *)pkg->ep_name,
- sizeof(pkg->ep_name), pkg->connection_id,
- 0, 0, 0, security_level, authorized, boot);
+ sw = add_switch(parent_sw, route, &pkg->ep_uuid, (const u8 *)pkg->ep_name,
+ sizeof(pkg->ep_name), pkg->connection_id, 0, 0, 0,
+ security_level, authorized, boot);
+ if (!IS_ERR(sw) && force_rtd3)
+ sw->rpm = true;
tb_switch_put(parent_sw);
}
static void
+icm_tr_device_connected(struct tb *tb, const struct icm_pkg_header *hdr)
+{
+ __icm_tr_device_connected(tb, hdr, false);
+}
+
+static void
icm_tr_device_disconnected(struct tb *tb, const struct icm_pkg_header *hdr)
{
const struct icm_tr_event_device_disconnected *pkg =
@@ -1466,6 +1530,61 @@ static int icm_ar_set_boot_acl(struct tb *tb, const uuid_t *uuids,
return 0;
}
+static int
+icm_icl_driver_ready(struct tb *tb, enum tb_security_level *security_level,
+ size_t *nboot_acl, bool *rpm)
+{
+ struct icm_tr_pkg_driver_ready_response reply;
+ struct icm_pkg_driver_ready request = {
+ .hdr.code = ICM_DRIVER_READY,
+ };
+ int ret;
+
+ memset(&reply, 0, sizeof(reply));
+ ret = icm_request(tb, &request, sizeof(request), &reply, sizeof(reply),
+ 1, 20000);
+ if (ret)
+ return ret;
+
+ /* Ice Lake always supports RTD3 */
+ if (rpm)
+ *rpm = true;
+
+ return 0;
+}
+
+static void icm_icl_set_uuid(struct tb *tb)
+{
+ struct tb_nhi *nhi = tb->nhi;
+ u32 uuid[4];
+
+ pci_read_config_dword(nhi->pdev, VS_CAP_10, &uuid[0]);
+ pci_read_config_dword(nhi->pdev, VS_CAP_11, &uuid[1]);
+ uuid[2] = 0xffffffff;
+ uuid[3] = 0xffffffff;
+
+ tb->root_switch->uuid = kmemdup(uuid, sizeof(uuid), GFP_KERNEL);
+}
+
+static void
+icm_icl_device_connected(struct tb *tb, const struct icm_pkg_header *hdr)
+{
+ __icm_tr_device_connected(tb, hdr, true);
+}
+
+static void icm_icl_rtd3_veto(struct tb *tb, const struct icm_pkg_header *hdr)
+{
+ const struct icm_icl_event_rtd3_veto *pkg =
+ (const struct icm_icl_event_rtd3_veto *)hdr;
+
+ tb_dbg(tb, "ICM rtd3 veto=0x%08x\n", pkg->veto_reason);
+
+ if (pkg->veto_reason)
+ icm_veto_begin(tb);
+ else
+ icm_veto_end(tb);
+}
+
static void icm_handle_notification(struct work_struct *work)
{
struct icm_notification *n = container_of(work, typeof(*n), work);
@@ -1493,6 +1612,9 @@ static void icm_handle_notification(struct work_struct *work)
case ICM_EVENT_XDOMAIN_DISCONNECTED:
icm->xdomain_disconnected(tb, n->pkg);
break;
+ case ICM_EVENT_RTD3_VETO:
+ icm->rtd3_veto(tb, n->pkg);
+ break;
}
}
@@ -1851,6 +1973,13 @@ static void icm_complete(struct tb *tb)
if (tb->nhi->going_away)
return;
+ /*
+ * If RTD3 was vetoed before we entered system suspend allow it
+ * again now before driver ready is sent. Firmware sends a new RTD3
+ * veto if it is still the case after we have sent it driver ready
+ * command.
+ */
+ icm_veto_end(tb);
icm_unplug_children(tb->root_switch);
/*
@@ -1913,14 +2042,12 @@ static int icm_start(struct tb *tb)
if (IS_ERR(tb->root_switch))
return PTR_ERR(tb->root_switch);
- /*
- * NVM upgrade has not been tested on Apple systems and they
- * don't provide images publicly either. To be on the safe side
- * prevent root switch NVM upgrade on Macs for now.
- */
- tb->root_switch->no_nvm_upgrade = x86_apple_machine;
+ tb->root_switch->no_nvm_upgrade = !icm->can_upgrade_nvm;
tb->root_switch->rpm = icm->rpm;
+ if (icm->set_uuid)
+ icm->set_uuid(tb);
+
ret = tb_switch_add(tb->root_switch);
if (ret) {
tb_switch_put(tb->root_switch);
@@ -2005,6 +2132,19 @@ static const struct tb_cm_ops icm_tr_ops = {
.disconnect_xdomain_paths = icm_tr_disconnect_xdomain_paths,
};
+/* Ice Lake */
+static const struct tb_cm_ops icm_icl_ops = {
+ .driver_ready = icm_driver_ready,
+ .start = icm_start,
+ .stop = icm_stop,
+ .complete = icm_complete,
+ .runtime_suspend = icm_runtime_suspend,
+ .runtime_resume = icm_runtime_resume,
+ .handle_event = icm_handle_event,
+ .approve_xdomain_paths = icm_tr_approve_xdomain_paths,
+ .disconnect_xdomain_paths = icm_tr_disconnect_xdomain_paths,
+};
+
struct tb *icm_probe(struct tb_nhi *nhi)
{
struct icm *icm;
@@ -2021,6 +2161,7 @@ struct tb *icm_probe(struct tb_nhi *nhi)
switch (nhi->pdev->device) {
case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_NHI:
case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_NHI:
+ icm->can_upgrade_nvm = true;
icm->is_supported = icm_fr_is_supported;
icm->get_route = icm_fr_get_route;
icm->save_devices = icm_fr_save_devices;
@@ -2038,6 +2179,13 @@ struct tb *icm_probe(struct tb_nhi *nhi)
case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_NHI:
case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_NHI:
icm->max_boot_acl = ICM_AR_PREBOOT_ACL_ENTRIES;
+ /*
+ * NVM upgrade has not been tested on Apple systems and
+ * they don't provide images publicly either. To be on
+ * the safe side prevent root switch NVM upgrade on Macs
+ * for now.
+ */
+ icm->can_upgrade_nvm = !x86_apple_machine;
icm->is_supported = icm_ar_is_supported;
icm->cio_reset = icm_ar_cio_reset;
icm->get_mode = icm_ar_get_mode;
@@ -2054,6 +2202,7 @@ struct tb *icm_probe(struct tb_nhi *nhi)
case PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_NHI:
case PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_NHI:
icm->max_boot_acl = ICM_AR_PREBOOT_ACL_ENTRIES;
+ icm->can_upgrade_nvm = !x86_apple_machine;
icm->is_supported = icm_ar_is_supported;
icm->cio_reset = icm_tr_cio_reset;
icm->get_mode = icm_ar_get_mode;
@@ -2064,6 +2213,19 @@ struct tb *icm_probe(struct tb_nhi *nhi)
icm->xdomain_disconnected = icm_tr_xdomain_disconnected;
tb->cm_ops = &icm_tr_ops;
break;
+
+ case PCI_DEVICE_ID_INTEL_ICL_NHI0:
+ case PCI_DEVICE_ID_INTEL_ICL_NHI1:
+ icm->is_supported = icm_ar_is_supported;
+ icm->driver_ready = icm_icl_driver_ready;
+ icm->set_uuid = icm_icl_set_uuid;
+ icm->device_connected = icm_icl_device_connected;
+ icm->device_disconnected = icm_tr_device_disconnected;
+ icm->xdomain_connected = icm_tr_xdomain_connected;
+ icm->xdomain_disconnected = icm_tr_xdomain_disconnected;
+ icm->rtd3_veto = icm_icl_rtd3_veto;
+ tb->cm_ops = &icm_icl_ops;
+ break;
}
if (!icm->is_supported || !icm->is_supported(tb)) {
diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c
index 27fbe62c7ddd..641b21b54460 100644
--- a/drivers/thunderbolt/nhi.c
+++ b/drivers/thunderbolt/nhi.c
@@ -16,6 +16,7 @@
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/delay.h>
+#include <linux/property.h>
#include "nhi.h"
#include "nhi_regs.h"
@@ -143,9 +144,20 @@ static void __iomem *ring_options_base(struct tb_ring *ring)
return io;
}
-static void ring_iowrite16desc(struct tb_ring *ring, u32 value, u32 offset)
+static void ring_iowrite_cons(struct tb_ring *ring, u16 cons)
{
- iowrite16(value, ring_desc_base(ring) + offset);
+ /*
+ * The other 16-bits in the register is read-only and writes to it
+ * are ignored by the hardware so we can save one ioread32() by
+ * filling the read-only bits with zeroes.
+ */
+ iowrite32(cons, ring_desc_base(ring) + 8);
+}
+
+static void ring_iowrite_prod(struct tb_ring *ring, u16 prod)
+{
+ /* See ring_iowrite_cons() above for explanation */
+ iowrite32(prod << 16, ring_desc_base(ring) + 8);
}
static void ring_iowrite32desc(struct tb_ring *ring, u32 value, u32 offset)
@@ -197,7 +209,10 @@ static void ring_write_descriptors(struct tb_ring *ring)
descriptor->sof = frame->sof;
}
ring->head = (ring->head + 1) % ring->size;
- ring_iowrite16desc(ring, ring->head, ring->is_tx ? 10 : 8);
+ if (ring->is_tx)
+ ring_iowrite_prod(ring, ring->head);
+ else
+ ring_iowrite_cons(ring, ring->head);
}
}
@@ -662,7 +677,7 @@ void tb_ring_stop(struct tb_ring *ring)
ring_iowrite32options(ring, 0, 0);
ring_iowrite64desc(ring, 0, 0);
- ring_iowrite16desc(ring, 0, ring->is_tx ? 10 : 8);
+ ring_iowrite32desc(ring, 0, 8);
ring_iowrite32desc(ring, 0, 12);
ring->head = 0;
ring->tail = 0;
@@ -845,12 +860,52 @@ static irqreturn_t nhi_msi(int irq, void *data)
return IRQ_HANDLED;
}
-static int nhi_suspend_noirq(struct device *dev)
+static int __nhi_suspend_noirq(struct device *dev, bool wakeup)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct tb *tb = pci_get_drvdata(pdev);
+ struct tb_nhi *nhi = tb->nhi;
+ int ret;
+
+ ret = tb_domain_suspend_noirq(tb);
+ if (ret)
+ return ret;
+
+ if (nhi->ops && nhi->ops->suspend_noirq) {
+ ret = nhi->ops->suspend_noirq(tb->nhi, wakeup);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int nhi_suspend_noirq(struct device *dev)
+{
+ return __nhi_suspend_noirq(dev, device_may_wakeup(dev));
+}
+
+static bool nhi_wake_supported(struct pci_dev *pdev)
+{
+ u8 val;
+
+ /*
+ * If power rails are sustainable for wakeup from S4 this
+ * property is set by the BIOS.
+ */
+ if (device_property_read_u8(&pdev->dev, "WAKE_SUPPORTED", &val))
+ return !!val;
+
+ return true;
+}
+
+static int nhi_poweroff_noirq(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ bool wakeup;
- return tb_domain_suspend_noirq(tb);
+ wakeup = device_may_wakeup(dev) && nhi_wake_supported(pdev);
+ return __nhi_suspend_noirq(dev, wakeup);
}
static void nhi_enable_int_throttling(struct tb_nhi *nhi)
@@ -873,16 +928,24 @@ static int nhi_resume_noirq(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct tb *tb = pci_get_drvdata(pdev);
+ struct tb_nhi *nhi = tb->nhi;
+ int ret;
/*
* Check that the device is still there. It may be that the user
* unplugged last device which causes the host controller to go
* away on PCs.
*/
- if (!pci_device_is_present(pdev))
- tb->nhi->going_away = true;
- else
+ if (!pci_device_is_present(pdev)) {
+ nhi->going_away = true;
+ } else {
+ if (nhi->ops && nhi->ops->resume_noirq) {
+ ret = nhi->ops->resume_noirq(nhi);
+ if (ret)
+ return ret;
+ }
nhi_enable_int_throttling(tb->nhi);
+ }
return tb_domain_resume_noirq(tb);
}
@@ -915,16 +978,35 @@ static int nhi_runtime_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct tb *tb = pci_get_drvdata(pdev);
+ struct tb_nhi *nhi = tb->nhi;
+ int ret;
+
+ ret = tb_domain_runtime_suspend(tb);
+ if (ret)
+ return ret;
- return tb_domain_runtime_suspend(tb);
+ if (nhi->ops && nhi->ops->runtime_suspend) {
+ ret = nhi->ops->runtime_suspend(tb->nhi);
+ if (ret)
+ return ret;
+ }
+ return 0;
}
static int nhi_runtime_resume(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct tb *tb = pci_get_drvdata(pdev);
+ struct tb_nhi *nhi = tb->nhi;
+ int ret;
- nhi_enable_int_throttling(tb->nhi);
+ if (nhi->ops && nhi->ops->runtime_resume) {
+ ret = nhi->ops->runtime_resume(nhi);
+ if (ret)
+ return ret;
+ }
+
+ nhi_enable_int_throttling(nhi);
return tb_domain_runtime_resume(tb);
}
@@ -952,6 +1034,9 @@ static void nhi_shutdown(struct tb_nhi *nhi)
flush_work(&nhi->interrupt_work);
}
ida_destroy(&nhi->msix_ida);
+
+ if (nhi->ops && nhi->ops->shutdown)
+ nhi->ops->shutdown(nhi);
}
static int nhi_init_msi(struct tb_nhi *nhi)
@@ -996,12 +1081,27 @@ static int nhi_init_msi(struct tb_nhi *nhi)
return 0;
}
+static bool nhi_imr_valid(struct pci_dev *pdev)
+{
+ u8 val;
+
+ if (!device_property_read_u8(&pdev->dev, "IMR_VALID", &val))
+ return !!val;
+
+ return true;
+}
+
static int nhi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct tb_nhi *nhi;
struct tb *tb;
int res;
+ if (!nhi_imr_valid(pdev)) {
+ dev_warn(&pdev->dev, "firmware image not valid, aborting\n");
+ return -ENODEV;
+ }
+
res = pcim_enable_device(pdev);
if (res) {
dev_err(&pdev->dev, "cannot enable PCI device, aborting\n");
@@ -1019,6 +1119,7 @@ static int nhi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return -ENOMEM;
nhi->pdev = pdev;
+ nhi->ops = (const struct tb_nhi_ops *)id->driver_data;
/* cannot fail - table is allocated bin pcim_iomap_regions */
nhi->iobase = pcim_iomap_table(pdev)[0];
nhi->hop_count = ioread32(nhi->iobase + REG_HOP_COUNT) & 0x3ff;
@@ -1051,6 +1152,12 @@ static int nhi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
pci_set_master(pdev);
+ if (nhi->ops && nhi->ops->init) {
+ res = nhi->ops->init(nhi);
+ if (res)
+ return res;
+ }
+
tb = icm_probe(nhi);
if (!tb)
tb = tb_probe(nhi);
@@ -1111,6 +1218,7 @@ static const struct dev_pm_ops nhi_pm_ops = {
.restore_noirq = nhi_resume_noirq,
.suspend = nhi_suspend,
.freeze = nhi_suspend,
+ .poweroff_noirq = nhi_poweroff_noirq,
.poweroff = nhi_suspend,
.complete = nhi_complete,
.runtime_suspend = nhi_runtime_suspend,
@@ -1158,6 +1266,10 @@ static struct pci_device_id nhi_ids[] = {
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_USBONLY_NHI) },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_NHI) },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_NHI) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICL_NHI0),
+ .driver_data = (kernel_ulong_t)&icl_nhi_ops },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICL_NHI1),
+ .driver_data = (kernel_ulong_t)&icl_nhi_ops },
{ 0,}
};
diff --git a/drivers/thunderbolt/nhi.h b/drivers/thunderbolt/nhi.h
index 1b5d47ecd3ed..b7b973949f8e 100644
--- a/drivers/thunderbolt/nhi.h
+++ b/drivers/thunderbolt/nhi.h
@@ -30,6 +30,26 @@ enum nhi_mailbox_cmd {
int nhi_mailbox_cmd(struct tb_nhi *nhi, enum nhi_mailbox_cmd cmd, u32 data);
enum nhi_fw_mode nhi_mailbox_mode(struct tb_nhi *nhi);
+/**
+ * struct tb_nhi_ops - NHI specific optional operations
+ * @init: NHI specific initialization
+ * @suspend_noirq: NHI specific suspend_noirq hook
+ * @resume_noirq: NHI specific resume_noirq hook
+ * @runtime_suspend: NHI specific runtime_suspend hook
+ * @runtime_resume: NHI specific runtime_resume hook
+ * @shutdown: NHI specific shutdown
+ */
+struct tb_nhi_ops {
+ int (*init)(struct tb_nhi *nhi);
+ int (*suspend_noirq)(struct tb_nhi *nhi, bool wakeup);
+ int (*resume_noirq)(struct tb_nhi *nhi);
+ int (*runtime_suspend)(struct tb_nhi *nhi);
+ int (*runtime_resume)(struct tb_nhi *nhi);
+ void (*shutdown)(struct tb_nhi *nhi);
+};
+
+extern const struct tb_nhi_ops icl_nhi_ops;
+
/*
* PCI IDs used in this driver from Win Ridge forward. There is no
* need for the PCI quirk anymore as we will use ICM also on Apple
@@ -51,5 +71,7 @@ enum nhi_fw_mode nhi_mailbox_mode(struct tb_nhi *nhi);
#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_BRIDGE 0x15ea
#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_NHI 0x15eb
#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_BRIDGE 0x15ef
+#define PCI_DEVICE_ID_INTEL_ICL_NHI1 0x8a0d
+#define PCI_DEVICE_ID_INTEL_ICL_NHI0 0x8a17
#endif
diff --git a/drivers/thunderbolt/nhi_ops.c b/drivers/thunderbolt/nhi_ops.c
new file mode 100644
index 000000000000..61cd09cef943
--- /dev/null
+++ b/drivers/thunderbolt/nhi_ops.c
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * NHI specific operations
+ *
+ * Copyright (C) 2019, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/suspend.h>
+
+#include "nhi.h"
+#include "nhi_regs.h"
+#include "tb.h"
+
+/* Ice Lake specific NHI operations */
+
+#define ICL_LC_MAILBOX_TIMEOUT 500 /* ms */
+
+static int check_for_device(struct device *dev, void *data)
+{
+ return tb_is_switch(dev);
+}
+
+static bool icl_nhi_is_device_connected(struct tb_nhi *nhi)
+{
+ struct tb *tb = pci_get_drvdata(nhi->pdev);
+ int ret;
+
+ ret = device_for_each_child(&tb->root_switch->dev, NULL,
+ check_for_device);
+ return ret > 0;
+}
+
+static int icl_nhi_force_power(struct tb_nhi *nhi, bool power)
+{
+ u32 vs_cap;
+
+ /*
+ * The Thunderbolt host controller is present always in Ice Lake
+ * but the firmware may not be loaded and running (depending
+ * whether there is device connected and so on). Each time the
+ * controller is used we need to "Force Power" it first and wait
+ * for the firmware to indicate it is up and running. This "Force
+ * Power" is really not about actually powering on/off the
+ * controller so it is accessible even if "Force Power" is off.
+ *
+ * The actual power management happens inside shared ACPI power
+ * resources using standard ACPI methods.
+ */
+ pci_read_config_dword(nhi->pdev, VS_CAP_22, &vs_cap);
+ if (power) {
+ vs_cap &= ~VS_CAP_22_DMA_DELAY_MASK;
+ vs_cap |= 0x22 << VS_CAP_22_DMA_DELAY_SHIFT;
+ vs_cap |= VS_CAP_22_FORCE_POWER;
+ } else {
+ vs_cap &= ~VS_CAP_22_FORCE_POWER;
+ }
+ pci_write_config_dword(nhi->pdev, VS_CAP_22, vs_cap);
+
+ if (power) {
+ unsigned int retries = 10;
+ u32 val;
+
+ /* Wait until the firmware tells it is up and running */
+ do {
+ pci_read_config_dword(nhi->pdev, VS_CAP_9, &val);
+ if (val & VS_CAP_9_FW_READY)
+ return 0;
+ msleep(250);
+ } while (--retries);
+
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static void icl_nhi_lc_mailbox_cmd(struct tb_nhi *nhi, enum icl_lc_mailbox_cmd cmd)
+{
+ u32 data;
+
+ pci_read_config_dword(nhi->pdev, VS_CAP_19, &data);
+ data = (cmd << VS_CAP_19_CMD_SHIFT) & VS_CAP_19_CMD_MASK;
+ pci_write_config_dword(nhi->pdev, VS_CAP_19, data | VS_CAP_19_VALID);
+}
+
+static int icl_nhi_lc_mailbox_cmd_complete(struct tb_nhi *nhi, int timeout)
+{
+ unsigned long end;
+ u32 data;
+
+ if (!timeout)
+ goto clear;
+
+ end = jiffies + msecs_to_jiffies(timeout);
+ do {
+ pci_read_config_dword(nhi->pdev, VS_CAP_18, &data);
+ if (data & VS_CAP_18_DONE)
+ goto clear;
+ msleep(100);
+ } while (time_before(jiffies, end));
+
+ return -ETIMEDOUT;
+
+clear:
+ /* Clear the valid bit */
+ pci_write_config_dword(nhi->pdev, VS_CAP_19, 0);
+ return 0;
+}
+
+static void icl_nhi_set_ltr(struct tb_nhi *nhi)
+{
+ u32 max_ltr, ltr;
+
+ pci_read_config_dword(nhi->pdev, VS_CAP_16, &max_ltr);
+ max_ltr &= 0xffff;
+ /* Program the same value for both snoop and no-snoop */
+ ltr = max_ltr << 16 | max_ltr;
+ pci_write_config_dword(nhi->pdev, VS_CAP_15, ltr);
+}
+
+static int icl_nhi_suspend(struct tb_nhi *nhi)
+{
+ int ret;
+
+ if (icl_nhi_is_device_connected(nhi))
+ return 0;
+
+ /*
+ * If there is no device connected we need to perform both: a
+ * handshake through LC mailbox and force power down before
+ * entering D3.
+ */
+ icl_nhi_lc_mailbox_cmd(nhi, ICL_LC_PREPARE_FOR_RESET);
+ ret = icl_nhi_lc_mailbox_cmd_complete(nhi, ICL_LC_MAILBOX_TIMEOUT);
+ if (ret)
+ return ret;
+
+ return icl_nhi_force_power(nhi, false);
+}
+
+static int icl_nhi_suspend_noirq(struct tb_nhi *nhi, bool wakeup)
+{
+ enum icl_lc_mailbox_cmd cmd;
+
+ if (!pm_suspend_via_firmware())
+ return icl_nhi_suspend(nhi);
+
+ cmd = wakeup ? ICL_LC_GO2SX : ICL_LC_GO2SX_NO_WAKE;
+ icl_nhi_lc_mailbox_cmd(nhi, cmd);
+ return icl_nhi_lc_mailbox_cmd_complete(nhi, ICL_LC_MAILBOX_TIMEOUT);
+}
+
+static int icl_nhi_resume(struct tb_nhi *nhi)
+{
+ int ret;
+
+ ret = icl_nhi_force_power(nhi, true);
+ if (ret)
+ return ret;
+
+ icl_nhi_set_ltr(nhi);
+ return 0;
+}
+
+static void icl_nhi_shutdown(struct tb_nhi *nhi)
+{
+ icl_nhi_force_power(nhi, false);
+}
+
+const struct tb_nhi_ops icl_nhi_ops = {
+ .init = icl_nhi_resume,
+ .suspend_noirq = icl_nhi_suspend_noirq,
+ .resume_noirq = icl_nhi_resume,
+ .runtime_suspend = icl_nhi_suspend,
+ .runtime_resume = icl_nhi_resume,
+ .shutdown = icl_nhi_shutdown,
+};
diff --git a/drivers/thunderbolt/nhi_regs.h b/drivers/thunderbolt/nhi_regs.h
index a60bd98c1d04..0d4970dcef84 100644
--- a/drivers/thunderbolt/nhi_regs.h
+++ b/drivers/thunderbolt/nhi_regs.h
@@ -124,4 +124,41 @@ struct ring_desc {
#define REG_FW_STS_ICM_EN_INVERT BIT(1)
#define REG_FW_STS_ICM_EN BIT(0)
+/* ICL NHI VSEC registers */
+
+/* FW ready */
+#define VS_CAP_9 0xc8
+#define VS_CAP_9_FW_READY BIT(31)
+/* UUID */
+#define VS_CAP_10 0xcc
+#define VS_CAP_11 0xd0
+/* LTR */
+#define VS_CAP_15 0xe0
+#define VS_CAP_16 0xe4
+/* TBT2PCIe */
+#define VS_CAP_18 0xec
+#define VS_CAP_18_DONE BIT(0)
+/* PCIe2TBT */
+#define VS_CAP_19 0xf0
+#define VS_CAP_19_VALID BIT(0)
+#define VS_CAP_19_CMD_SHIFT 1
+#define VS_CAP_19_CMD_MASK GENMASK(7, 1)
+/* Force power */
+#define VS_CAP_22 0xfc
+#define VS_CAP_22_FORCE_POWER BIT(1)
+#define VS_CAP_22_DMA_DELAY_MASK GENMASK(31, 24)
+#define VS_CAP_22_DMA_DELAY_SHIFT 24
+
+/**
+ * enum icl_lc_mailbox_cmd - ICL specific LC mailbox commands
+ * @ICL_LC_GO2SX: Ask LC to enter Sx without wake
+ * @ICL_LC_GO2SX_NO_WAKE: Ask LC to enter Sx with wake
+ * @ICL_LC_PREPARE_FOR_RESET: Prepare LC for reset
+ */
+enum icl_lc_mailbox_cmd {
+ ICL_LC_GO2SX = 0x02,
+ ICL_LC_GO2SX_NO_WAKE = 0x03,
+ ICL_LC_PREPARE_FOR_RESET = 0x21,
+};
+
#endif
diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
index 5668a44e0653..410bf1bceeee 100644
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -364,12 +364,14 @@ static int tb_switch_nvm_add(struct tb_switch *sw)
nvm->active = nvm_dev;
}
- nvm_dev = register_nvmem(sw, nvm->id, NVM_MAX_SIZE, false);
- if (IS_ERR(nvm_dev)) {
- ret = PTR_ERR(nvm_dev);
- goto err_nvm_active;
+ if (!sw->no_nvm_upgrade) {
+ nvm_dev = register_nvmem(sw, nvm->id, NVM_MAX_SIZE, false);
+ if (IS_ERR(nvm_dev)) {
+ ret = PTR_ERR(nvm_dev);
+ goto err_nvm_active;
+ }
+ nvm->non_active = nvm_dev;
}
- nvm->non_active = nvm_dev;
sw->nvm = nvm;
return 0;
@@ -398,7 +400,8 @@ static void tb_switch_nvm_remove(struct tb_switch *sw)
if (!nvm->authenticating)
nvm_clear_auth_status(sw);
- nvmem_unregister(nvm->non_active);
+ if (nvm->non_active)
+ nvmem_unregister(nvm->non_active);
if (nvm->active)
nvmem_unregister(nvm->active);
ida_simple_remove(&nvm_ida, nvm->id);
@@ -611,8 +614,14 @@ static int tb_init_port(struct tb_port *port)
int cap;
res = tb_port_read(port, &port->config, TB_CFG_PORT, 0, 8);
- if (res)
+ if (res) {
+ if (res == -ENODEV) {
+ tb_dbg(port->sw->tb, " Port %d: not implemented\n",
+ port->port);
+ return 0;
+ }
return res;
+ }
/* Port 0 is the switch itself and has no PHY. */
if (port->config.type == TB_TYPE_PORT && port->port != 0) {
@@ -1331,14 +1340,29 @@ static umode_t switch_attr_is_visible(struct kobject *kobj,
struct device *dev = container_of(kobj, struct device, kobj);
struct tb_switch *sw = tb_to_switch(dev);
- if (attr == &dev_attr_key.attr) {
+ if (attr == &dev_attr_device.attr) {
+ if (!sw->device)
+ return 0;
+ } else if (attr == &dev_attr_device_name.attr) {
+ if (!sw->device_name)
+ return 0;
+ } else if (attr == &dev_attr_vendor.attr) {
+ if (!sw->vendor)
+ return 0;
+ } else if (attr == &dev_attr_vendor_name.attr) {
+ if (!sw->vendor_name)
+ return 0;
+ } else if (attr == &dev_attr_key.attr) {
if (tb_route(sw) &&
sw->tb->security_level == TB_SECURITY_SECURE &&
sw->security_level == TB_SECURITY_SECURE)
return attr->mode;
return 0;
- } else if (attr == &dev_attr_nvm_authenticate.attr ||
- attr == &dev_attr_nvm_version.attr) {
+ } else if (attr == &dev_attr_nvm_authenticate.attr) {
+ if (sw->dma_port && !sw->no_nvm_upgrade)
+ return attr->mode;
+ return 0;
+ } else if (attr == &dev_attr_nvm_version.attr) {
if (sw->dma_port)
return attr->mode;
return 0;
@@ -1446,6 +1470,8 @@ static int tb_switch_get_generation(struct tb_switch *sw)
case PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_BRIDGE:
case PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_BRIDGE:
case PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_BRIDGE:
+ case PCI_DEVICE_ID_INTEL_ICL_NHI0:
+ case PCI_DEVICE_ID_INTEL_ICL_NHI1:
return 3;
default:
@@ -1689,13 +1715,17 @@ static int tb_switch_add_dma_port(struct tb_switch *sw)
break;
}
- if (sw->no_nvm_upgrade)
+ /* Root switch DMA port requires running firmware */
+ if (!tb_route(sw) && sw->config.enabled)
return 0;
sw->dma_port = dma_port_alloc(sw);
if (!sw->dma_port)
return 0;
+ if (sw->no_nvm_upgrade)
+ return 0;
+
/*
* Check status of the previous flash authentication. If there
* is one we need to power cycle the switch in any case to make
diff --git a/drivers/thunderbolt/tb_msgs.h b/drivers/thunderbolt/tb_msgs.h
index afbe1d29bb03..4b641e4ee0c5 100644
--- a/drivers/thunderbolt/tb_msgs.h
+++ b/drivers/thunderbolt/tb_msgs.h
@@ -104,10 +104,11 @@ enum icm_pkg_code {
};
enum icm_event_code {
- ICM_EVENT_DEVICE_CONNECTED = 3,
- ICM_EVENT_DEVICE_DISCONNECTED = 4,
- ICM_EVENT_XDOMAIN_CONNECTED = 6,
- ICM_EVENT_XDOMAIN_DISCONNECTED = 7,
+ ICM_EVENT_DEVICE_CONNECTED = 0x3,
+ ICM_EVENT_DEVICE_DISCONNECTED = 0x4,
+ ICM_EVENT_XDOMAIN_CONNECTED = 0x6,
+ ICM_EVENT_XDOMAIN_DISCONNECTED = 0x7,
+ ICM_EVENT_RTD3_VETO = 0xa,
};
struct icm_pkg_header {
@@ -463,6 +464,13 @@ struct icm_tr_pkg_disconnect_xdomain_response {
uuid_t remote_uuid;
};
+/* Ice Lake messages */
+
+struct icm_icl_event_rtd3_veto {
+ struct icm_pkg_header hdr;
+ u32 veto_reason;
+};
+
/* XDomain messages */
struct tb_xdomain_header {
diff --git a/drivers/thunderbolt/tunnel.c b/drivers/thunderbolt/tunnel.c
index 31d0234837e4..5a99234826e7 100644
--- a/drivers/thunderbolt/tunnel.c
+++ b/drivers/thunderbolt/tunnel.c
@@ -211,7 +211,7 @@ struct tb_tunnel *tb_tunnel_alloc_pci(struct tb *tb, struct tb_port *up,
return NULL;
}
tb_pci_init_path(path);
- tunnel->paths[TB_PCI_PATH_UP] = path;
+ tunnel->paths[TB_PCI_PATH_DOWN] = path;
path = tb_path_alloc(tb, up, TB_PCI_HOPID, down, TB_PCI_HOPID, 0,
"PCIe Up");
@@ -220,7 +220,7 @@ struct tb_tunnel *tb_tunnel_alloc_pci(struct tb *tb, struct tb_port *up,
return NULL;
}
tb_pci_init_path(path);
- tunnel->paths[TB_PCI_PATH_DOWN] = path;
+ tunnel->paths[TB_PCI_PATH_UP] = path;
return tunnel;
}
diff --git a/drivers/thunderbolt/xdomain.c b/drivers/thunderbolt/xdomain.c
index 5118d46702d5..4e17a7c7bf0a 100644
--- a/drivers/thunderbolt/xdomain.c
+++ b/drivers/thunderbolt/xdomain.c
@@ -636,7 +636,7 @@ static ssize_t key_show(struct device *dev, struct device_attribute *attr,
* It should be null terminated but anything else is pretty much
* allowed.
*/
- return sprintf(buf, "%*pEp\n", (int)strlen(svc->key), svc->key);
+ return sprintf(buf, "%*pE\n", (int)strlen(svc->key), svc->key);
}
static DEVICE_ATTR_RO(key);
diff --git a/drivers/uio/uio_dmem_genirq.c b/drivers/uio/uio_dmem_genirq.c
index f32cef94aa82..ebcf1434e296 100644
--- a/drivers/uio/uio_dmem_genirq.c
+++ b/drivers/uio/uio_dmem_genirq.c
@@ -200,10 +200,8 @@ static int uio_dmem_genirq_probe(struct platform_device *pdev)
if (!uioinfo->irq) {
ret = platform_get_irq(pdev, 0);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to get IRQ\n");
+ if (ret < 0)
goto bad1;
- }
uioinfo->irq = ret;
}
uiomem = &uioinfo->mem[0];
diff --git a/drivers/uio/uio_pdrv_genirq.c b/drivers/uio/uio_pdrv_genirq.c
index 10688d79d180..1303b165055b 100644
--- a/drivers/uio/uio_pdrv_genirq.c
+++ b/drivers/uio/uio_pdrv_genirq.c
@@ -102,12 +102,15 @@ static int uio_pdrv_genirq_irqcontrol(struct uio_info *dev_info, s32 irq_on)
static int uio_pdrv_genirq_probe(struct platform_device *pdev)
{
struct uio_info *uioinfo = dev_get_platdata(&pdev->dev);
+ struct device_node *node = pdev->dev.of_node;
struct uio_pdrv_genirq_platdata *priv;
struct uio_mem *uiomem;
int ret = -EINVAL;
int i;
- if (pdev->dev.of_node) {
+ if (node) {
+ const char *name;
+
/* alloc uioinfo for one device */
uioinfo = devm_kzalloc(&pdev->dev, sizeof(*uioinfo),
GFP_KERNEL);
@@ -115,8 +118,13 @@ static int uio_pdrv_genirq_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "unable to kmalloc\n");
return -ENOMEM;
}
- uioinfo->name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%pOFn",
- pdev->dev.of_node);
+
+ if (!of_property_read_string(node, "linux,uio-name", &name))
+ uioinfo->name = devm_kstrdup(&pdev->dev, name, GFP_KERNEL);
+ else
+ uioinfo->name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
+ "%pOFn", node);
+
uioinfo->version = "devicetree";
/* Multiple IRQs are not supported */
}
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index 7ae260577901..24b9a8e05f64 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -65,5 +65,14 @@ config HDQ_MASTER_OMAP
Say Y here if you want support for the 1-wire or HDQ Interface
on an OMAP processor.
+config W1_MASTER_SGI
+ tristate "SGI ASIC driver"
+ help
+ Say Y here if you want support for your 1-wire devices using
+ SGI ASIC 1-Wire interface
+
+ This support is also available as a module. If so, the module
+ will be called sgi_w1.
+
endmenu
diff --git a/drivers/w1/masters/Makefile b/drivers/w1/masters/Makefile
index 18954cae4256..dae629b7ab49 100644
--- a/drivers/w1/masters/Makefile
+++ b/drivers/w1/masters/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_W1_MASTER_MXC) += mxc_w1.o
obj-$(CONFIG_W1_MASTER_DS1WM) += ds1wm.o
obj-$(CONFIG_W1_MASTER_GPIO) += w1-gpio.o
obj-$(CONFIG_HDQ_MASTER_OMAP) += omap_hdq.o
+obj-$(CONFIG_W1_MASTER_SGI) += sgi_w1.o
diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c
index c3b2095ef6a9..1ca880e01476 100644
--- a/drivers/w1/masters/mxc_w1.c
+++ b/drivers/w1/masters/mxc_w1.c
@@ -92,7 +92,6 @@ static int mxc_w1_probe(struct platform_device *pdev)
{
struct mxc_w1_device *mdev;
unsigned long clkrate;
- struct resource *res;
unsigned int clkdiv;
int err;
@@ -120,8 +119,7 @@ static int mxc_w1_probe(struct platform_device *pdev)
dev_warn(&pdev->dev,
"Incorrect time base frequency %lu Hz\n", clkrate);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- mdev->regs = devm_ioremap_resource(&pdev->dev, res);
+ mdev->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(mdev->regs)) {
err = PTR_ERR(mdev->regs);
goto out_disable_clk;
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index 3099052e1243..4164045866b3 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -660,7 +660,6 @@ static int omap_hdq_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct hdq_data *hdq_data;
- struct resource *res;
int ret, irq;
u8 rev;
const char *mode;
@@ -674,8 +673,7 @@ static int omap_hdq_probe(struct platform_device *pdev)
hdq_data->dev = dev;
platform_set_drvdata(pdev, hdq_data);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- hdq_data->hdq_base = devm_ioremap_resource(dev, res);
+ hdq_data->hdq_base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(hdq_data->hdq_base))
return PTR_ERR(hdq_data->hdq_base);
diff --git a/drivers/w1/masters/sgi_w1.c b/drivers/w1/masters/sgi_w1.c
new file mode 100644
index 000000000000..1b2d96b945be
--- /dev/null
+++ b/drivers/w1/masters/sgi_w1.c
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * sgi_w1.c - w1 master driver for one wire support in SGI ASICs
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/sgi-w1.h>
+
+#include <linux/w1.h>
+
+#define MCR_RD_DATA BIT(0)
+#define MCR_DONE BIT(1)
+
+#define MCR_PACK(pulse, sample) (((pulse) << 10) | ((sample) << 2))
+
+struct sgi_w1_device {
+ u32 __iomem *mcr;
+ struct w1_bus_master bus_master;
+ char dev_id[64];
+};
+
+static u8 sgi_w1_wait(u32 __iomem *mcr)
+{
+ u32 mcr_val;
+
+ do {
+ mcr_val = readl(mcr);
+ } while (!(mcr_val & MCR_DONE));
+
+ return (mcr_val & MCR_RD_DATA) ? 1 : 0;
+}
+
+/*
+ * this is the low level routine to
+ * reset the device on the One Wire interface
+ * on the hardware
+ */
+static u8 sgi_w1_reset_bus(void *data)
+{
+ struct sgi_w1_device *dev = data;
+ u8 ret;
+
+ writel(MCR_PACK(520, 65), dev->mcr);
+ ret = sgi_w1_wait(dev->mcr);
+ udelay(500); /* recovery time */
+ return ret;
+}
+
+/*
+ * this is the low level routine to read/write a bit on the One Wire
+ * interface on the hardware. It does write 0 if parameter bit is set
+ * to 0, otherwise a write 1/read.
+ */
+static u8 sgi_w1_touch_bit(void *data, u8 bit)
+{
+ struct sgi_w1_device *dev = data;
+ u8 ret;
+
+ if (bit)
+ writel(MCR_PACK(6, 13), dev->mcr);
+ else
+ writel(MCR_PACK(80, 30), dev->mcr);
+
+ ret = sgi_w1_wait(dev->mcr);
+ if (bit)
+ udelay(100); /* recovery */
+ return ret;
+}
+
+static int sgi_w1_probe(struct platform_device *pdev)
+{
+ struct sgi_w1_device *sdev;
+ struct sgi_w1_platform_data *pdata;
+ struct resource *res;
+
+ sdev = devm_kzalloc(&pdev->dev, sizeof(struct sgi_w1_device),
+ GFP_KERNEL);
+ if (!sdev)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ sdev->mcr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(sdev->mcr))
+ return PTR_ERR(sdev->mcr);
+
+ sdev->bus_master.data = sdev;
+ sdev->bus_master.reset_bus = sgi_w1_reset_bus;
+ sdev->bus_master.touch_bit = sgi_w1_touch_bit;
+
+ pdata = dev_get_platdata(&pdev->dev);
+ if (pdata) {
+ strlcpy(sdev->dev_id, pdata->dev_id, sizeof(sdev->dev_id));
+ sdev->bus_master.dev_id = sdev->dev_id;
+ }
+
+ platform_set_drvdata(pdev, sdev);
+
+ return w1_add_master_device(&sdev->bus_master);
+}
+
+/*
+ * disassociate the w1 device from the driver
+ */
+static int sgi_w1_remove(struct platform_device *pdev)
+{
+ struct sgi_w1_device *sdev = platform_get_drvdata(pdev);
+
+ w1_remove_master_device(&sdev->bus_master);
+
+ return 0;
+}
+
+static struct platform_driver sgi_w1_driver = {
+ .driver = {
+ .name = "sgi_w1",
+ },
+ .probe = sgi_w1_probe,
+ .remove = sgi_w1_remove,
+};
+module_platform_driver(sgi_w1_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Thomas Bogendoerfer");
+MODULE_DESCRIPTION("Driver for One-Wire IP in SGI ASICs");
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
index 37aaad26b373..ebed495b9e69 100644
--- a/drivers/w1/slaves/Kconfig
+++ b/drivers/w1/slaves/Kconfig
@@ -101,6 +101,12 @@ config W1_SLAVE_DS2438
Say Y here if you want to use a 1-wire
DS2438 Smart Battery Monitor device support
+config W1_SLAVE_DS250X
+ tristate "512b/1kb/16kb EPROM family support"
+ help
+ Say Y here if you want to use a 1-wire
+ 512b/1kb/16kb EPROM family device (DS250x).
+
config W1_SLAVE_DS2780
tristate "Dallas 2780 battery monitor chip"
help
diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile
index eab29f151413..8e9655eaa478 100644
--- a/drivers/w1/slaves/Makefile
+++ b/drivers/w1/slaves/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_W1_SLAVE_DS2431) += w1_ds2431.o
obj-$(CONFIG_W1_SLAVE_DS2805) += w1_ds2805.o
obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o
obj-$(CONFIG_W1_SLAVE_DS2438) += w1_ds2438.o
+obj-$(CONFIG_W1_SLAVE_DS250X) += w1_ds250x.o
obj-$(CONFIG_W1_SLAVE_DS2780) += w1_ds2780.o
obj-$(CONFIG_W1_SLAVE_DS2781) += w1_ds2781.o
obj-$(CONFIG_W1_SLAVE_DS28E04) += w1_ds28e04.o
diff --git a/drivers/w1/slaves/w1_ds250x.c b/drivers/w1/slaves/w1_ds250x.c
new file mode 100644
index 000000000000..e507117444d8
--- /dev/null
+++ b/drivers/w1/slaves/w1_ds250x.c
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * w1_ds250x.c - w1 family 09/0b/89/91 (DS250x) driver
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/crc16.h>
+
+#include <linux/w1.h>
+#include <linux/nvmem-provider.h>
+
+#define W1_DS2501_UNW_FAMILY 0x91
+#define W1_DS2501_SIZE 64
+
+#define W1_DS2502_FAMILY 0x09
+#define W1_DS2502_UNW_FAMILY 0x89
+#define W1_DS2502_SIZE 128
+
+#define W1_DS2505_FAMILY 0x0b
+#define W1_DS2505_SIZE 2048
+
+#define W1_PAGE_SIZE 32
+
+#define W1_EXT_READ_MEMORY 0xA5
+#define W1_READ_DATA_CRC 0xC3
+
+#define OFF2PG(off) ((off) / W1_PAGE_SIZE)
+
+#define CRC16_INIT 0
+#define CRC16_VALID 0xb001
+
+struct w1_eprom_data {
+ size_t size;
+ int (*read)(struct w1_slave *sl, int pageno);
+ u8 eprom[W1_DS2505_SIZE];
+ DECLARE_BITMAP(page_present, W1_DS2505_SIZE / W1_PAGE_SIZE);
+ char nvmem_name[64];
+};
+
+static int w1_ds2502_read_page(struct w1_slave *sl, int pageno)
+{
+ struct w1_eprom_data *data = sl->family_data;
+ int pgoff = pageno * W1_PAGE_SIZE;
+ int ret = -EIO;
+ u8 buf[3];
+ u8 crc8;
+
+ if (test_bit(pageno, data->page_present))
+ return 0; /* page already present */
+
+ mutex_lock(&sl->master->bus_mutex);
+
+ if (w1_reset_select_slave(sl))
+ goto err;
+
+ buf[0] = W1_READ_DATA_CRC;
+ buf[1] = pgoff & 0xff;
+ buf[2] = pgoff >> 8;
+ w1_write_block(sl->master, buf, 3);
+
+ crc8 = w1_read_8(sl->master);
+ if (w1_calc_crc8(buf, 3) != crc8)
+ goto err;
+
+ w1_read_block(sl->master, &data->eprom[pgoff], W1_PAGE_SIZE);
+
+ crc8 = w1_read_8(sl->master);
+ if (w1_calc_crc8(&data->eprom[pgoff], W1_PAGE_SIZE) != crc8)
+ goto err;
+
+ set_bit(pageno, data->page_present); /* mark page present */
+ ret = 0;
+err:
+ mutex_unlock(&sl->master->bus_mutex);
+ return ret;
+}
+
+static int w1_ds2505_read_page(struct w1_slave *sl, int pageno)
+{
+ struct w1_eprom_data *data = sl->family_data;
+ int redir_retries = 16;
+ int pgoff, epoff;
+ int ret = -EIO;
+ u8 buf[6];
+ u8 redir;
+ u16 crc;
+
+ if (test_bit(pageno, data->page_present))
+ return 0; /* page already present */
+
+ epoff = pgoff = pageno * W1_PAGE_SIZE;
+ mutex_lock(&sl->master->bus_mutex);
+
+retry:
+ if (w1_reset_select_slave(sl))
+ goto err;
+
+ buf[0] = W1_EXT_READ_MEMORY;
+ buf[1] = pgoff & 0xff;
+ buf[2] = pgoff >> 8;
+ w1_write_block(sl->master, buf, 3);
+ w1_read_block(sl->master, buf + 3, 3); /* redir, crc16 */
+ redir = buf[3];
+ crc = crc16(CRC16_INIT, buf, 6);
+
+ if (crc != CRC16_VALID)
+ goto err;
+
+
+ if (redir != 0xff) {
+ redir_retries--;
+ if (redir_retries < 0)
+ goto err;
+
+ pgoff = (redir ^ 0xff) * W1_PAGE_SIZE;
+ goto retry;
+ }
+
+ w1_read_block(sl->master, &data->eprom[epoff], W1_PAGE_SIZE);
+ w1_read_block(sl->master, buf, 2); /* crc16 */
+ crc = crc16(CRC16_INIT, &data->eprom[epoff], W1_PAGE_SIZE);
+ crc = crc16(crc, buf, 2);
+
+ if (crc != CRC16_VALID)
+ goto err;
+
+ set_bit(pageno, data->page_present);
+ ret = 0;
+err:
+ mutex_unlock(&sl->master->bus_mutex);
+ return ret;
+}
+
+static int w1_nvmem_read(void *priv, unsigned int off, void *buf, size_t count)
+{
+ struct w1_slave *sl = priv;
+ struct w1_eprom_data *data = sl->family_data;
+ size_t eprom_size = data->size;
+ int ret;
+ int i;
+
+ if (off > eprom_size)
+ return -EINVAL;
+
+ if ((off + count) > eprom_size)
+ count = eprom_size - off;
+
+ i = OFF2PG(off);
+ do {
+ ret = data->read(sl, i++);
+ if (ret < 0)
+ return ret;
+ } while (i < OFF2PG(off + count));
+
+ memcpy(buf, &data->eprom[off], count);
+ return 0;
+}
+
+static int w1_eprom_add_slave(struct w1_slave *sl)
+{
+ struct w1_eprom_data *data;
+ struct nvmem_device *nvmem;
+ struct nvmem_config nvmem_cfg = {
+ .dev = &sl->dev,
+ .reg_read = w1_nvmem_read,
+ .type = NVMEM_TYPE_OTP,
+ .read_only = true,
+ .word_size = 1,
+ .priv = sl,
+ .id = -1
+ };
+
+ data = devm_kzalloc(&sl->dev, sizeof(struct w1_eprom_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ sl->family_data = data;
+ switch (sl->family->fid) {
+ case W1_DS2501_UNW_FAMILY:
+ data->size = W1_DS2501_SIZE;
+ data->read = w1_ds2502_read_page;
+ break;
+ case W1_DS2502_FAMILY:
+ case W1_DS2502_UNW_FAMILY:
+ data->size = W1_DS2502_SIZE;
+ data->read = w1_ds2502_read_page;
+ break;
+ case W1_DS2505_FAMILY:
+ data->size = W1_DS2505_SIZE;
+ data->read = w1_ds2505_read_page;
+ break;
+ }
+
+ if (sl->master->bus_master->dev_id)
+ snprintf(data->nvmem_name, sizeof(data->nvmem_name),
+ "%s-%02x-%012llx",
+ sl->master->bus_master->dev_id, sl->reg_num.family,
+ (unsigned long long)sl->reg_num.id);
+ else
+ snprintf(data->nvmem_name, sizeof(data->nvmem_name),
+ "%02x-%012llx",
+ sl->reg_num.family,
+ (unsigned long long)sl->reg_num.id);
+
+ nvmem_cfg.name = data->nvmem_name;
+ nvmem_cfg.size = data->size;
+
+ nvmem = devm_nvmem_register(&sl->dev, &nvmem_cfg);
+ return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static struct w1_family_ops w1_eprom_fops = {
+ .add_slave = w1_eprom_add_slave,
+};
+
+static struct w1_family w1_family_09 = {
+ .fid = W1_DS2502_FAMILY,
+ .fops = &w1_eprom_fops,
+};
+
+static struct w1_family w1_family_0b = {
+ .fid = W1_DS2505_FAMILY,
+ .fops = &w1_eprom_fops,
+};
+
+static struct w1_family w1_family_89 = {
+ .fid = W1_DS2502_UNW_FAMILY,
+ .fops = &w1_eprom_fops,
+};
+
+static struct w1_family w1_family_91 = {
+ .fid = W1_DS2501_UNW_FAMILY,
+ .fops = &w1_eprom_fops,
+};
+
+static int __init w1_ds250x_init(void)
+{
+ int err;
+
+ err = w1_register_family(&w1_family_09);
+ if (err)
+ return err;
+
+ err = w1_register_family(&w1_family_0b);
+ if (err)
+ goto err_0b;
+
+ err = w1_register_family(&w1_family_89);
+ if (err)
+ goto err_89;
+
+ err = w1_register_family(&w1_family_91);
+ if (err)
+ goto err_91;
+
+ return 0;
+
+err_91:
+ w1_unregister_family(&w1_family_89);
+err_89:
+ w1_unregister_family(&w1_family_0b);
+err_0b:
+ w1_unregister_family(&w1_family_09);
+ return err;
+}
+
+static void __exit w1_ds250x_exit(void)
+{
+ w1_unregister_family(&w1_family_09);
+ w1_unregister_family(&w1_family_0b);
+ w1_unregister_family(&w1_family_89);
+ w1_unregister_family(&w1_family_91);
+}
+
+module_init(w1_ds250x_init);
+module_exit(w1_ds250x_exit);
+
+MODULE_AUTHOR("Thomas Bogendoerfer <tbogendoerfe@suse.de>");
+MODULE_DESCRIPTION("w1 family driver for DS250x Add Only Memory");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("w1-family-" __stringify(W1_DS2502_FAMILY));
+MODULE_ALIAS("w1-family-" __stringify(W1_DS2505_FAMILY));
+MODULE_ALIAS("w1-family-" __stringify(W1_DS2501_UNW_FAMILY));
+MODULE_ALIAS("w1-family-" __stringify(W1_DS2502_UNW_FAMILY));
diff --git a/include/dt-bindings/interconnect/qcom,qcs404.h b/include/dt-bindings/interconnect/qcom,qcs404.h
new file mode 100644
index 000000000000..960f6e39c5f2
--- /dev/null
+++ b/include/dt-bindings/interconnect/qcom,qcs404.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Qualcomm interconnect IDs
+ *
+ * Copyright (c) 2019, Linaro Ltd.
+ * Author: Georgi Djakov <georgi.djakov@linaro.org>
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_QCS404_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_QCS404_H
+
+#define MASTER_AMPSS_M0 0
+#define MASTER_OXILI 1
+#define MASTER_MDP_PORT0 2
+#define MASTER_SNOC_BIMC_1 3
+#define MASTER_TCU_0 4
+#define SLAVE_EBI_CH0 5
+#define SLAVE_BIMC_SNOC 6
+
+#define MASTER_SPDM 0
+#define MASTER_BLSP_1 1
+#define MASTER_BLSP_2 2
+#define MASTER_XI_USB_HS1 3
+#define MASTER_CRYPT0 4
+#define MASTER_SDCC_1 5
+#define MASTER_SDCC_2 6
+#define MASTER_SNOC_PCNOC 7
+#define MASTER_QPIC 8
+#define PCNOC_INT_0 9
+#define PCNOC_INT_2 10
+#define PCNOC_INT_3 11
+#define PCNOC_S_0 12
+#define PCNOC_S_1 13
+#define PCNOC_S_2 14
+#define PCNOC_S_3 15
+#define PCNOC_S_4 16
+#define PCNOC_S_6 17
+#define PCNOC_S_7 18
+#define PCNOC_S_8 19
+#define PCNOC_S_9 20
+#define PCNOC_S_10 21
+#define PCNOC_S_11 22
+#define SLAVE_SPDM 23
+#define SLAVE_PDM 24
+#define SLAVE_PRNG 25
+#define SLAVE_TCSR 26
+#define SLAVE_SNOC_CFG 27
+#define SLAVE_MESSAGE_RAM 28
+#define SLAVE_DISP_SS_CFG 29
+#define SLAVE_GPU_CFG 30
+#define SLAVE_BLSP_1 31
+#define SLAVE_BLSP_2 32
+#define SLAVE_TLMM_NORTH 33
+#define SLAVE_PCIE 34
+#define SLAVE_ETHERNET 35
+#define SLAVE_TLMM_EAST 36
+#define SLAVE_TCU 37
+#define SLAVE_PMIC_ARB 38
+#define SLAVE_SDCC_1 39
+#define SLAVE_SDCC_2 40
+#define SLAVE_TLMM_SOUTH 41
+#define SLAVE_USB_HS 42
+#define SLAVE_USB3 43
+#define SLAVE_CRYPTO_0_CFG 44
+#define SLAVE_PCNOC_SNOC 45
+
+#define MASTER_QDSS_BAM 0
+#define MASTER_BIMC_SNOC 1
+#define MASTER_PCNOC_SNOC 2
+#define MASTER_QDSS_ETR 3
+#define MASTER_EMAC 4
+#define MASTER_PCIE 5
+#define MASTER_USB3 6
+#define QDSS_INT 7
+#define SNOC_INT_0 8
+#define SNOC_INT_1 9
+#define SNOC_INT_2 10
+#define SLAVE_KPSS_AHB 11
+#define SLAVE_WCSS 12
+#define SLAVE_SNOC_BIMC_1 13
+#define SLAVE_IMEM 14
+#define SLAVE_SNOC_PCNOC 15
+#define SLAVE_QDSS_STM 16
+#define SLAVE_CATS_0 17
+#define SLAVE_CATS_1 18
+#define SLAVE_LPASS 19
+
+#endif
diff --git a/include/dt-bindings/phy/phy-lantiq-vrx200-pcie.h b/include/dt-bindings/phy/phy-lantiq-vrx200-pcie.h
new file mode 100644
index 000000000000..95a7896356d6
--- /dev/null
+++ b/include/dt-bindings/phy/phy-lantiq-vrx200-pcie.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2019 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ */
+
+#define LANTIQ_PCIE_PHY_MODE_25MHZ 0
+#define LANTIQ_PCIE_PHY_MODE_25MHZ_SSC 1
+#define LANTIQ_PCIE_PHY_MODE_36MHZ 2
+#define LANTIQ_PCIE_PHY_MODE_36MHZ_SSC 3
+#define LANTIQ_PCIE_PHY_MODE_100MHZ 4
+#define LANTIQ_PCIE_PHY_MODE_100MHZ_SSC 5
diff --git a/include/linux/firmware/intel/stratix10-smc.h b/include/linux/firmware/intel/stratix10-smc.h
index 01684d935580..013ae4819deb 100644
--- a/include/linux/firmware/intel/stratix10-smc.h
+++ b/include/linux/firmware/intel/stratix10-smc.h
@@ -210,7 +210,7 @@ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)
#define INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_LOOPBACK)
-/*
+/**
* Request INTEL_SIP_SMC_REG_READ
*
* Read a protected register at EL3
@@ -229,7 +229,7 @@ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)
#define INTEL_SIP_SMC_REG_READ \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_READ)
-/*
+/**
* Request INTEL_SIP_SMC_REG_WRITE
*
* Write a protected register at EL3
@@ -248,7 +248,7 @@ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)
#define INTEL_SIP_SMC_REG_WRITE \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_WRITE)
-/*
+/**
* Request INTEL_SIP_SMC_FUNCID_REG_UPDATE
*
* Update one or more bits in a protected register at EL3 using a
@@ -269,7 +269,7 @@ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)
#define INTEL_SIP_SMC_REG_UPDATE \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_UPDATE)
-/*
+/**
* Request INTEL_SIP_SMC_RSU_STATUS
*
* Request remote status update boot log, call is synchronous.
@@ -292,7 +292,7 @@ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)
#define INTEL_SIP_SMC_RSU_STATUS \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_STATUS)
-/*
+/**
* Request INTEL_SIP_SMC_RSU_UPDATE
*
* Request to set the offset of the bitstream to boot after reboot, call
@@ -310,7 +310,7 @@ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)
#define INTEL_SIP_SMC_RSU_UPDATE \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_UPDATE)
-/*
+/**
* Request INTEL_SIP_SMC_ECC_DBE
*
* Sync call used by service driver at EL1 to alert EL3 that a Double
@@ -329,3 +329,42 @@ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_ECC_DBE)
#endif
+
+/**
+ * Request INTEL_SIP_SMC_RSU_NOTIFY
+ *
+ * Sync call used by service driver at EL1 to report hard processor
+ * system execution stage to firmware
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_RSU_NOTIFY
+ * a1 32bit value representing hard processor system execution stage
+ * a2-7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+ */
+#define INTEL_SIP_SMC_FUNCID_RSU_NOTIFY 14
+#define INTEL_SIP_SMC_RSU_NOTIFY \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_NOTIFY)
+
+/**
+ * Request INTEL_SIP_SMC_RSU_RETRY_COUNTER
+ *
+ * Sync call used by service driver at EL1 to query RSU retry counter
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_RSU_RETRY_COUNTER
+ * a1-7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+ * a1 the retry counter
+ *
+ * Or
+ *
+ * a0 INTEL_SIP_SMC_RSU_ERROR
+ */
+#define INTEL_SIP_SMC_FUNCID_RSU_RETRY_COUNTER 15
+#define INTEL_SIP_SMC_RSU_RETRY_COUNTER \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_RETRY_COUNTER)
diff --git a/include/linux/firmware/intel/stratix10-svc-client.h b/include/linux/firmware/intel/stratix10-svc-client.h
index e521f172a47a..b6c4302a39e0 100644
--- a/include/linux/firmware/intel/stratix10-svc-client.h
+++ b/include/linux/firmware/intel/stratix10-svc-client.h
@@ -95,6 +95,13 @@ struct stratix10_svc_chan;
*
* @COMMAND_RSU_UPDATE: set the offset of the bitstream to boot after reboot,
* return status is SVC_STATUS_RSU_OK or SVC_STATUS_RSU_ERROR
+ *
+ * @COMMAND_RSU_NOTIFY: report the status of hard processor system
+ * software to firmware, return status is SVC_STATUS_RSU_OK or
+ * SVC_STATUS_RSU_ERROR
+ *
+ * @COMMAND_RSU_RETRY: query firmware for the current image's retry counter,
+ * return status is SVC_STATUS_RSU_OK or SVC_STATUS_RSU_ERROR
*/
enum stratix10_svc_command_code {
COMMAND_NOOP = 0,
@@ -103,7 +110,9 @@ enum stratix10_svc_command_code {
COMMAND_RECONFIG_DATA_CLAIM,
COMMAND_RECONFIG_STATUS,
COMMAND_RSU_STATUS,
- COMMAND_RSU_UPDATE
+ COMMAND_RSU_UPDATE,
+ COMMAND_RSU_NOTIFY,
+ COMMAND_RSU_RETRY,
};
/**
diff --git a/include/linux/fpga/altera-pr-ip-core.h b/include/linux/fpga/altera-pr-ip-core.h
index 7d4664730d60..0b08ac20ab16 100644
--- a/include/linux/fpga/altera-pr-ip-core.h
+++ b/include/linux/fpga/altera-pr-ip-core.h
@@ -13,6 +13,6 @@
#include <linux/io.h>
int alt_pr_register(struct device *dev, void __iomem *reg_base);
-int alt_pr_unregister(struct device *dev);
+void alt_pr_unregister(struct device *dev);
#endif /* _ALT_PR_IP_CORE_H */
diff --git a/include/linux/intel_th.h b/include/linux/intel_th.h
new file mode 100644
index 000000000000..9b7f4c22499c
--- /dev/null
+++ b/include/linux/intel_th.h
@@ -0,0 +1,79 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Intel(R) Trace Hub data structures for implementing buffer sinks.
+ *
+ * Copyright (C) 2019 Intel Corporation.
+ */
+
+#ifndef _INTEL_TH_H_
+#define _INTEL_TH_H_
+
+#include <linux/scatterlist.h>
+
+/* MSC operating modes (MSC_MODE) */
+enum {
+ MSC_MODE_SINGLE = 0,
+ MSC_MODE_MULTI,
+ MSC_MODE_EXI,
+ MSC_MODE_DEBUG,
+};
+
+struct msu_buffer {
+ const char *name;
+ /*
+ * ->assign() called when buffer 'mode' is set to this driver
+ * (aka mode_store())
+ * @device: struct device * of the msc
+ * @mode: allows the driver to set HW mode (see the enum above)
+ * Returns: a pointer to a private structure associated with this
+ * msc or NULL in case of error. This private structure
+ * will then be passed into all other callbacks.
+ */
+ void *(*assign)(struct device *dev, int *mode);
+ /* ->unassign(): some other mode is selected, clean up */
+ void (*unassign)(void *priv);
+ /*
+ * ->alloc_window(): allocate memory for the window of a given
+ * size
+ * @sgt: pointer to sg_table, can be overridden by the buffer
+ * driver, or kept intact
+ * Returns: number of sg table entries <= number of pages;
+ * 0 is treated as an allocation failure.
+ */
+ int (*alloc_window)(void *priv, struct sg_table **sgt,
+ size_t size);
+ void (*free_window)(void *priv, struct sg_table *sgt);
+ /* ->activate(): trace has started */
+ void (*activate)(void *priv);
+ /* ->deactivate(): trace is about to stop */
+ void (*deactivate)(void *priv);
+ /*
+ * ->ready(): window @sgt is filled up to the last block OR
+ * tracing is stopped by the user; this window contains
+ * @bytes data. The window in question transitions into
+ * the "LOCKED" state, indicating that it can't be used
+ * by hardware. To clear this state and make the window
+ * available to the hardware again, call
+ * intel_th_msc_window_unlock().
+ */
+ int (*ready)(void *priv, struct sg_table *sgt, size_t bytes);
+};
+
+int intel_th_msu_buffer_register(const struct msu_buffer *mbuf,
+ struct module *owner);
+void intel_th_msu_buffer_unregister(const struct msu_buffer *mbuf);
+void intel_th_msc_window_unlock(struct device *dev, struct sg_table *sgt);
+
+#define module_intel_th_msu_buffer(__buffer) \
+static int __init __buffer##_init(void) \
+{ \
+ return intel_th_msu_buffer_register(&(__buffer), THIS_MODULE); \
+} \
+module_init(__buffer##_init); \
+static void __exit __buffer##_exit(void) \
+{ \
+ intel_th_msu_buffer_unregister(&(__buffer)); \
+} \
+module_exit(__buffer##_exit);
+
+#endif /* _INTEL_TH_H_ */
diff --git a/include/linux/interconnect-provider.h b/include/linux/interconnect-provider.h
index 63caccadc2db..b16f9effa555 100644
--- a/include/linux/interconnect-provider.h
+++ b/include/linux/interconnect-provider.h
@@ -36,6 +36,8 @@ struct icc_node *of_icc_xlate_onecell(struct of_phandle_args *spec,
* @nodes: internal list of the interconnect provider nodes
* @set: pointer to device specific set operation function
* @aggregate: pointer to device specific aggregate operation function
+ * @pre_aggregate: pointer to device specific function that is called
+ * before the aggregation begins (optional)
* @xlate: provider-specific callback for mapping nodes from phandle arguments
* @dev: the device this interconnect provider belongs to
* @users: count of active users
@@ -45,8 +47,9 @@ struct icc_provider {
struct list_head provider_list;
struct list_head nodes;
int (*set)(struct icc_node *src, struct icc_node *dst);
- int (*aggregate)(struct icc_node *node, u32 avg_bw, u32 peak_bw,
- u32 *agg_avg, u32 *agg_peak);
+ int (*aggregate)(struct icc_node *node, u32 tag, u32 avg_bw,
+ u32 peak_bw, u32 *agg_avg, u32 *agg_peak);
+ void (*pre_aggregate)(struct icc_node *node);
struct icc_node* (*xlate)(struct of_phandle_args *spec, void *data);
struct device *dev;
int users;
diff --git a/include/linux/interconnect.h b/include/linux/interconnect.h
index dc25864755ba..d70a914cba11 100644
--- a/include/linux/interconnect.h
+++ b/include/linux/interconnect.h
@@ -30,6 +30,7 @@ struct icc_path *icc_get(struct device *dev, const int src_id,
struct icc_path *of_icc_get(struct device *dev, const char *name);
void icc_put(struct icc_path *path);
int icc_set_bw(struct icc_path *path, u32 avg_bw, u32 peak_bw);
+void icc_set_tag(struct icc_path *path, u32 tag);
#else
@@ -54,6 +55,10 @@ static inline int icc_set_bw(struct icc_path *path, u32 avg_bw, u32 peak_bw)
return 0;
}
+static inline void icc_set_tag(struct icc_path *path, u32 tag)
+{
+}
+
#endif /* CONFIG_INTERCONNECT */
#endif /* __LINUX_INTERCONNECT_H */
diff --git a/include/linux/platform_data/sgi-w1.h b/include/linux/platform_data/sgi-w1.h
new file mode 100644
index 000000000000..e28c8a90ff84
--- /dev/null
+++ b/include/linux/platform_data/sgi-w1.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * SGI One-Wire (W1) IP
+ */
+
+#ifndef PLATFORM_DATA_SGI_W1_H
+#define PLATFORM_DATA_SGI_W1_H
+
+struct sgi_w1_platform_data {
+ char dev_id[64];
+};
+
+#endif /* PLATFORM_DATA_SGI_W1_H */
diff --git a/include/linux/thunderbolt.h b/include/linux/thunderbolt.h
index 2d7e012db03f..ece782ef5466 100644
--- a/include/linux/thunderbolt.h
+++ b/include/linux/thunderbolt.h
@@ -429,6 +429,7 @@ static inline struct tb_xdomain *tb_service_parent(struct tb_service *svc)
* @lock: Must be held during ring creation/destruction. Is acquired by
* interrupt_work when dispatching interrupts to individual rings.
* @pdev: Pointer to the PCI device
+ * @ops: NHI specific optional ops
* @iobase: MMIO space of the NHI
* @tx_rings: All Tx rings available on this host controller
* @rx_rings: All Rx rings available on this host controller
@@ -442,6 +443,7 @@ static inline struct tb_xdomain *tb_service_parent(struct tb_service *svc)
struct tb_nhi {
spinlock_t lock;
struct pci_dev *pdev;
+ const struct tb_nhi_ops *ops;
void __iomem *iobase;
struct tb_ring **tx_rings;
struct tb_ring **rx_rings;
diff --git a/include/linux/w1.h b/include/linux/w1.h
index e0b5156f78fd..7da0c7588e04 100644
--- a/include/linux/w1.h
+++ b/include/linux/w1.h
@@ -118,6 +118,9 @@ typedef void (*w1_slave_found_callback)(struct w1_master *, u64);
* w1_master* is passed to the slave found callback.
* u8 is search_type, W1_SEARCH or W1_ALARM_SEARCH
*
+ * @dev_id: Optional device id string, which w1 slaves could use for
+ * creating names, which then give a connection to the w1 master
+ *
* Note: read_bit and write_bit are very low level functions and should only
* be used with hardware that doesn't really support 1-wire operations,
* like a parallel/serial port.
@@ -150,6 +153,8 @@ struct w1_bus_master {
void (*search)(void *, struct w1_master *,
u8, w1_slave_found_callback);
+
+ char *dev_id;
};
/**
diff --git a/include/soc/qcom/tcs.h b/include/soc/qcom/tcs.h
index 262876a59e86..7a2a055ba6b0 100644
--- a/include/soc/qcom/tcs.h
+++ b/include/soc/qcom/tcs.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
- * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
*/
#ifndef __SOC_QCOM_TCS_H__
@@ -53,4 +53,22 @@ struct tcs_request {
struct tcs_cmd *cmds;
};
+#define BCM_TCS_CMD_COMMIT_SHFT 30
+#define BCM_TCS_CMD_COMMIT_MASK 0x40000000
+#define BCM_TCS_CMD_VALID_SHFT 29
+#define BCM_TCS_CMD_VALID_MASK 0x20000000
+#define BCM_TCS_CMD_VOTE_X_SHFT 14
+#define BCM_TCS_CMD_VOTE_MASK 0x3fff
+#define BCM_TCS_CMD_VOTE_Y_SHFT 0
+#define BCM_TCS_CMD_VOTE_Y_MASK 0xfffc000
+
+/* Construct a Bus Clock Manager (BCM) specific TCS command */
+#define BCM_TCS_CMD(commit, valid, vote_x, vote_y) \
+ (((commit) << BCM_TCS_CMD_COMMIT_SHFT) | \
+ ((valid) << BCM_TCS_CMD_VALID_SHFT) | \
+ ((cpu_to_le32(vote_x) & \
+ BCM_TCS_CMD_VOTE_MASK) << BCM_TCS_CMD_VOTE_X_SHFT) | \
+ ((cpu_to_le32(vote_y) & \
+ BCM_TCS_CMD_VOTE_MASK) << BCM_TCS_CMD_VOTE_Y_SHFT))
+
#endif /* __SOC_QCOM_TCS_H__ */
diff --git a/include/uapi/linux/fpga-dfl.h b/include/uapi/linux/fpga-dfl.h
index 2e324e515c41..ec70a0746e59 100644
--- a/include/uapi/linux/fpga-dfl.h
+++ b/include/uapi/linux/fpga-dfl.h
@@ -176,4 +176,22 @@ struct dfl_fpga_fme_port_pr {
#define DFL_FPGA_FME_PORT_PR _IO(DFL_FPGA_MAGIC, DFL_FME_BASE + 0)
+/**
+ * DFL_FPGA_FME_PORT_RELEASE - _IOW(DFL_FPGA_MAGIC, DFL_FME_BASE + 1,
+ * int port_id)
+ *
+ * Driver releases the port per Port ID provided by caller.
+ * Return: 0 on success, -errno on failure.
+ */
+#define DFL_FPGA_FME_PORT_RELEASE _IOW(DFL_FPGA_MAGIC, DFL_FME_BASE + 1, int)
+
+/**
+ * DFL_FPGA_FME_PORT_ASSIGN - _IOW(DFL_FPGA_MAGIC, DFL_FME_BASE + 2,
+ * int port_id)
+ *
+ * Driver assigns the port back per Port ID provided by caller.
+ * Return: 0 on success, -errno on failure.
+ */
+#define DFL_FPGA_FME_PORT_ASSIGN _IOW(DFL_FPGA_MAGIC, DFL_FME_BASE + 2, int)
+
#endif /* _UAPI_LINUX_FPGA_DFL_H */
diff --git a/include/uapi/linux/ppdev.h b/include/uapi/linux/ppdev.h
index 8fe3c64d149e..eb895b83f2bd 100644
--- a/include/uapi/linux/ppdev.h
+++ b/include/uapi/linux/ppdev.h
@@ -15,6 +15,9 @@
* Added PPGETMODES/PPGETMODE/PPGETPHASE, Fred Barnes <frmb2@ukc.ac.uk>, 03/01/2001
*/
+#ifndef _UAPI_LINUX_PPDEV_H
+#define _UAPI_LINUX_PPDEV_H
+
#define PP_IOCTL 'p'
/* Set mode for read/write (e.g. IEEE1284_MODE_EPP) */
@@ -97,4 +100,4 @@ struct ppdev_frob_struct {
/* only masks user-visible flags */
#define PP_FLAGMASK (PP_FASTWRITE | PP_FASTREAD | PP_W91284PIC)
-
+#endif /* _UAPI_LINUX_PPDEV_H */
diff --git a/include/uapi/misc/habanalabs.h b/include/uapi/misc/habanalabs.h
index 3956c226ca35..39c4ea51a719 100644
--- a/include/uapi/misc/habanalabs.h
+++ b/include/uapi/misc/habanalabs.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note
*
- * Copyright 2016-2018 HabanaLabs, Ltd.
+ * Copyright 2016-2019 HabanaLabs, Ltd.
* All Rights Reserved.
*
*/
@@ -28,20 +28,20 @@
enum goya_queue_id {
GOYA_QUEUE_ID_DMA_0 = 0,
- GOYA_QUEUE_ID_DMA_1,
- GOYA_QUEUE_ID_DMA_2,
- GOYA_QUEUE_ID_DMA_3,
- GOYA_QUEUE_ID_DMA_4,
- GOYA_QUEUE_ID_CPU_PQ,
- GOYA_QUEUE_ID_MME, /* Internal queues start here */
- GOYA_QUEUE_ID_TPC0,
- GOYA_QUEUE_ID_TPC1,
- GOYA_QUEUE_ID_TPC2,
- GOYA_QUEUE_ID_TPC3,
- GOYA_QUEUE_ID_TPC4,
- GOYA_QUEUE_ID_TPC5,
- GOYA_QUEUE_ID_TPC6,
- GOYA_QUEUE_ID_TPC7,
+ GOYA_QUEUE_ID_DMA_1 = 1,
+ GOYA_QUEUE_ID_DMA_2 = 2,
+ GOYA_QUEUE_ID_DMA_3 = 3,
+ GOYA_QUEUE_ID_DMA_4 = 4,
+ GOYA_QUEUE_ID_CPU_PQ = 5,
+ GOYA_QUEUE_ID_MME = 6, /* Internal queues start here */
+ GOYA_QUEUE_ID_TPC0 = 7,
+ GOYA_QUEUE_ID_TPC1 = 8,
+ GOYA_QUEUE_ID_TPC2 = 9,
+ GOYA_QUEUE_ID_TPC3 = 10,
+ GOYA_QUEUE_ID_TPC4 = 11,
+ GOYA_QUEUE_ID_TPC5 = 12,
+ GOYA_QUEUE_ID_TPC6 = 13,
+ GOYA_QUEUE_ID_TPC7 = 14,
GOYA_QUEUE_ID_SIZE
};
@@ -75,12 +75,34 @@ enum hl_device_status {
HL_DEVICE_STATUS_MALFUNCTION
};
-/* Opcode for management ioctl */
-#define HL_INFO_HW_IP_INFO 0
-#define HL_INFO_HW_EVENTS 1
-#define HL_INFO_DRAM_USAGE 2
-#define HL_INFO_HW_IDLE 3
-#define HL_INFO_DEVICE_STATUS 4
+/* Opcode for management ioctl
+ *
+ * HW_IP_INFO - Receive information about different IP blocks in the
+ * device.
+ * HL_INFO_HW_EVENTS - Receive an array describing how many times each event
+ * occurred since the last hard reset.
+ * HL_INFO_DRAM_USAGE - Retrieve the dram usage inside the device and of the
+ * specific context. This is relevant only for devices
+ * where the dram is managed by the kernel driver
+ * HL_INFO_HW_IDLE - Retrieve information about the idle status of each
+ * internal engine.
+ * HL_INFO_DEVICE_STATUS - Retrieve the device's status. This opcode doesn't
+ * require an open context.
+ * HL_INFO_DEVICE_UTILIZATION - Retrieve the total utilization of the device
+ * over the last period specified by the user.
+ * The period can be between 100ms to 1s, in
+ * resolution of 100ms. The return value is a
+ * percentage of the utilization rate.
+ * HL_INFO_HW_EVENTS_AGGREGATE - Receive an array describing how many times each
+ * event occurred since the driver was loaded.
+ */
+#define HL_INFO_HW_IP_INFO 0
+#define HL_INFO_HW_EVENTS 1
+#define HL_INFO_DRAM_USAGE 2
+#define HL_INFO_HW_IDLE 3
+#define HL_INFO_DEVICE_STATUS 4
+#define HL_INFO_DEVICE_UTILIZATION 6
+#define HL_INFO_HW_EVENTS_AGGREGATE 7
#define HL_INFO_VERSION_MAX_LEN 128
@@ -122,6 +144,11 @@ struct hl_info_device_status {
__u32 pad;
};
+struct hl_info_device_utilization {
+ __u32 utilization;
+ __u32 pad;
+};
+
struct hl_info_args {
/* Location of relevant struct in userspace */
__u64 return_pointer;
@@ -137,8 +164,15 @@ struct hl_info_args {
/* HL_INFO_* */
__u32 op;
- /* Context ID - Currently not in use */
- __u32 ctx_id;
+ union {
+ /* Context ID - Currently not in use */
+ __u32 ctx_id;
+ /* Period value for utilization rate (100ms - 1000ms, in 100ms
+ * resolution.
+ */
+ __u32 period_ms;
+ };
+
__u32 pad;
};
@@ -295,12 +329,12 @@ struct hl_mem_in {
struct {
/*
* Requested virtual address of mapped memory.
- * KMD will try to map the requested region to this
- * hint address, as long as the address is valid and
- * not already mapped. The user should check the
+ * The driver will try to map the requested region to
+ * this hint address, as long as the address is valid
+ * and not already mapped. The user should check the
* returned address of the IOCTL to make sure he got
- * the hint address. Passing 0 here means that KMD
- * will choose the address itself.
+ * the hint address. Passing 0 here means that the
+ * driver will choose the address itself.
*/
__u64 hint_addr;
/* Handle returned from HL_MEM_OP_ALLOC */
@@ -313,12 +347,12 @@ struct hl_mem_in {
__u64 host_virt_addr;
/*
* Requested virtual address of mapped memory.
- * KMD will try to map the requested region to this
- * hint address, as long as the address is valid and
- * not already mapped. The user should check the
+ * The driver will try to map the requested region to
+ * this hint address, as long as the address is valid
+ * and not already mapped. The user should check the
* returned address of the IOCTL to make sure he got
- * the hint address. Passing 0 here means that KMD
- * will choose the address itself.
+ * the hint address. Passing 0 here means that the
+ * driver will choose the address itself.
*/
__u64 hint_addr;
/* Size of allocated host memory */
@@ -439,7 +473,7 @@ struct hl_debug_params_spmu {
#define HL_DEBUG_OP_BMON 4
/* Opcode for SPMU component */
#define HL_DEBUG_OP_SPMU 5
-/* Opcode for timestamp */
+/* Opcode for timestamp (deprecated) */
#define HL_DEBUG_OP_TIMESTAMP 6
/* Opcode for setting the device into or out of debug mode. The enable
* variable should be 1 for enabling debug mode and 0 for disabling it
diff --git a/include/uapi/misc/xilinx_sdfec.h b/include/uapi/misc/xilinx_sdfec.h
new file mode 100644
index 000000000000..ee1a42ae6f46
--- /dev/null
+++ b/include/uapi/misc/xilinx_sdfec.h
@@ -0,0 +1,448 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * Xilinx SD-FEC
+ *
+ * Copyright (C) 2019 Xilinx, Inc.
+ *
+ * Description:
+ * This driver is developed for SDFEC16 IP. It provides a char device
+ * in sysfs and supports file operations like open(), close() and ioctl().
+ */
+#ifndef __XILINX_SDFEC_H__
+#define __XILINX_SDFEC_H__
+
+#include <linux/types.h>
+
+/* Shared LDPC Tables */
+#define XSDFEC_LDPC_SC_TABLE_ADDR_BASE (0x10000)
+#define XSDFEC_LDPC_SC_TABLE_ADDR_HIGH (0x10400)
+#define XSDFEC_LDPC_LA_TABLE_ADDR_BASE (0x18000)
+#define XSDFEC_LDPC_LA_TABLE_ADDR_HIGH (0x19000)
+#define XSDFEC_LDPC_QC_TABLE_ADDR_BASE (0x20000)
+#define XSDFEC_LDPC_QC_TABLE_ADDR_HIGH (0x28000)
+
+/* LDPC tables depth */
+#define XSDFEC_SC_TABLE_DEPTH \
+ (XSDFEC_LDPC_SC_TABLE_ADDR_HIGH - XSDFEC_LDPC_SC_TABLE_ADDR_BASE)
+#define XSDFEC_LA_TABLE_DEPTH \
+ (XSDFEC_LDPC_LA_TABLE_ADDR_HIGH - XSDFEC_LDPC_LA_TABLE_ADDR_BASE)
+#define XSDFEC_QC_TABLE_DEPTH \
+ (XSDFEC_LDPC_QC_TABLE_ADDR_HIGH - XSDFEC_LDPC_QC_TABLE_ADDR_BASE)
+
+/**
+ * enum xsdfec_code - Code Type.
+ * @XSDFEC_TURBO_CODE: Driver is configured for Turbo mode.
+ * @XSDFEC_LDPC_CODE: Driver is configured for LDPC mode.
+ *
+ * This enum is used to indicate the mode of the driver. The mode is determined
+ * by checking which codes are set in the driver. Note that the mode cannot be
+ * changed by the driver.
+ */
+enum xsdfec_code {
+ XSDFEC_TURBO_CODE = 0,
+ XSDFEC_LDPC_CODE,
+};
+
+/**
+ * enum xsdfec_order - Order
+ * @XSDFEC_MAINTAIN_ORDER: Maintain order execution of blocks.
+ * @XSDFEC_OUT_OF_ORDER: Out-of-order execution of blocks.
+ *
+ * This enum is used to indicate whether the order of blocks can change from
+ * input to output.
+ */
+enum xsdfec_order {
+ XSDFEC_MAINTAIN_ORDER = 0,
+ XSDFEC_OUT_OF_ORDER,
+};
+
+/**
+ * enum xsdfec_turbo_alg - Turbo Algorithm Type.
+ * @XSDFEC_MAX_SCALE: Max Log-Map algorithm with extrinsic scaling. When
+ * scaling is set to this is equivalent to the Max Log-Map
+ * algorithm.
+ * @XSDFEC_MAX_STAR: Log-Map algorithm.
+ * @XSDFEC_TURBO_ALG_MAX: Used to indicate out of bound Turbo algorithms.
+ *
+ * This enum specifies which Turbo Decode algorithm is in use.
+ */
+enum xsdfec_turbo_alg {
+ XSDFEC_MAX_SCALE = 0,
+ XSDFEC_MAX_STAR,
+ XSDFEC_TURBO_ALG_MAX,
+};
+
+/**
+ * enum xsdfec_state - State.
+ * @XSDFEC_INIT: Driver is initialized.
+ * @XSDFEC_STARTED: Driver is started.
+ * @XSDFEC_STOPPED: Driver is stopped.
+ * @XSDFEC_NEEDS_RESET: Driver needs to be reset.
+ * @XSDFEC_PL_RECONFIGURE: Programmable Logic needs to be recofigured.
+ *
+ * This enum is used to indicate the state of the driver.
+ */
+enum xsdfec_state {
+ XSDFEC_INIT = 0,
+ XSDFEC_STARTED,
+ XSDFEC_STOPPED,
+ XSDFEC_NEEDS_RESET,
+ XSDFEC_PL_RECONFIGURE,
+};
+
+/**
+ * enum xsdfec_axis_width - AXIS_WIDTH.DIN Setting for 128-bit width.
+ * @XSDFEC_1x128b: DIN data input stream consists of a 128-bit lane
+ * @XSDFEC_2x128b: DIN data input stream consists of two 128-bit lanes
+ * @XSDFEC_4x128b: DIN data input stream consists of four 128-bit lanes
+ *
+ * This enum is used to indicate the AXIS_WIDTH.DIN setting for 128-bit width.
+ * The number of lanes of the DIN data input stream depends upon the
+ * AXIS_WIDTH.DIN parameter.
+ */
+enum xsdfec_axis_width {
+ XSDFEC_1x128b = 1,
+ XSDFEC_2x128b = 2,
+ XSDFEC_4x128b = 4,
+};
+
+/**
+ * enum xsdfec_axis_word_include - Words Configuration.
+ * @XSDFEC_FIXED_VALUE: Fixed, the DIN_WORDS AXI4-Stream interface is removed
+ * from the IP instance and is driven with the specified
+ * number of words.
+ * @XSDFEC_IN_BLOCK: In Block, configures the IP instance to expect a single
+ * DIN_WORDS value per input code block. The DIN_WORDS
+ * interface is present.
+ * @XSDFEC_PER_AXI_TRANSACTION: Per Transaction, configures the IP instance to
+ * expect one DIN_WORDS value per input transaction on the DIN interface. The
+ * DIN_WORDS interface is present.
+ * @XSDFEC_AXIS_WORDS_INCLUDE_MAX: Used to indicate out of bound Words
+ * Configurations.
+ *
+ * This enum is used to specify the DIN_WORDS configuration.
+ */
+enum xsdfec_axis_word_include {
+ XSDFEC_FIXED_VALUE = 0,
+ XSDFEC_IN_BLOCK,
+ XSDFEC_PER_AXI_TRANSACTION,
+ XSDFEC_AXIS_WORDS_INCLUDE_MAX,
+};
+
+/**
+ * struct xsdfec_turbo - User data for Turbo codes.
+ * @alg: Specifies which Turbo decode algorithm to use
+ * @scale: Specifies the extrinsic scaling to apply when the Max Scale algorithm
+ * has been selected
+ *
+ * Turbo code structure to communicate parameters to XSDFEC driver.
+ */
+struct xsdfec_turbo {
+ __u32 alg;
+ __u8 scale;
+};
+
+/**
+ * struct xsdfec_ldpc_params - User data for LDPC codes.
+ * @n: Number of code word bits
+ * @k: Number of information bits
+ * @psize: Size of sub-matrix
+ * @nlayers: Number of layers in code
+ * @nqc: Quasi Cyclic Number
+ * @nmqc: Number of M-sized QC operations in parity check matrix
+ * @nm: Number of M-size vectors in N
+ * @norm_type: Normalization required or not
+ * @no_packing: Determines if multiple QC ops should be performed
+ * @special_qc: Sub-Matrix property for Circulant weight > 0
+ * @no_final_parity: Decide if final parity check needs to be performed
+ * @max_schedule: Experimental code word scheduling limit
+ * @sc_off: SC offset
+ * @la_off: LA offset
+ * @qc_off: QC offset
+ * @sc_table: Pointer to SC Table which must be page aligned
+ * @la_table: Pointer to LA Table which must be page aligned
+ * @qc_table: Pointer to QC Table which must be page aligned
+ * @code_id: LDPC Code
+ *
+ * This structure describes the LDPC code that is passed to the driver by the
+ * application.
+ */
+struct xsdfec_ldpc_params {
+ __u32 n;
+ __u32 k;
+ __u32 psize;
+ __u32 nlayers;
+ __u32 nqc;
+ __u32 nmqc;
+ __u32 nm;
+ __u32 norm_type;
+ __u32 no_packing;
+ __u32 special_qc;
+ __u32 no_final_parity;
+ __u32 max_schedule;
+ __u32 sc_off;
+ __u32 la_off;
+ __u32 qc_off;
+ __u32 *sc_table;
+ __u32 *la_table;
+ __u32 *qc_table;
+ __u16 code_id;
+};
+
+/**
+ * struct xsdfec_status - Status of SD-FEC core.
+ * @state: State of the SD-FEC core
+ * @activity: Describes if the SD-FEC instance is Active
+ */
+struct xsdfec_status {
+ __u32 state;
+ __s8 activity;
+};
+
+/**
+ * struct xsdfec_irq - Enabling or Disabling Interrupts.
+ * @enable_isr: If true enables the ISR
+ * @enable_ecc_isr: If true enables the ECC ISR
+ */
+struct xsdfec_irq {
+ __s8 enable_isr;
+ __s8 enable_ecc_isr;
+};
+
+/**
+ * struct xsdfec_config - Configuration of SD-FEC core.
+ * @code: The codes being used by the SD-FEC instance
+ * @order: Order of Operation
+ * @din_width: Width of the DIN AXI4-Stream
+ * @din_word_include: How DIN_WORDS are inputted
+ * @dout_width: Width of the DOUT AXI4-Stream
+ * @dout_word_include: HOW DOUT_WORDS are outputted
+ * @irq: Enabling or disabling interrupts
+ * @bypass: Is the core being bypassed
+ * @code_wr_protect: Is write protection of LDPC codes enabled
+ */
+struct xsdfec_config {
+ __u32 code;
+ __u32 order;
+ __u32 din_width;
+ __u32 din_word_include;
+ __u32 dout_width;
+ __u32 dout_word_include;
+ struct xsdfec_irq irq;
+ __s8 bypass;
+ __s8 code_wr_protect;
+};
+
+/**
+ * struct xsdfec_stats - Stats retrived by ioctl XSDFEC_GET_STATS. Used
+ * to buffer atomic_t variables from struct
+ * xsdfec_dev. Counts are accumulated until
+ * the user clears them.
+ * @isr_err_count: Count of ISR errors
+ * @cecc_count: Count of Correctable ECC errors (SBE)
+ * @uecc_count: Count of Uncorrectable ECC errors (MBE)
+ */
+struct xsdfec_stats {
+ __u32 isr_err_count;
+ __u32 cecc_count;
+ __u32 uecc_count;
+};
+
+/**
+ * struct xsdfec_ldpc_param_table_sizes - Used to store sizes of SD-FEC table
+ * entries for an individual LPDC code
+ * parameter.
+ * @sc_size: Size of SC table used
+ * @la_size: Size of LA table used
+ * @qc_size: Size of QC table used
+ */
+struct xsdfec_ldpc_param_table_sizes {
+ __u32 sc_size;
+ __u32 la_size;
+ __u32 qc_size;
+};
+
+/*
+ * XSDFEC IOCTL List
+ */
+#define XSDFEC_MAGIC 'f'
+/**
+ * DOC: XSDFEC_START_DEV
+ *
+ * @Description
+ *
+ * ioctl to start SD-FEC core
+ *
+ * This fails if the XSDFEC_SET_ORDER ioctl has not been previously called
+ */
+#define XSDFEC_START_DEV _IO(XSDFEC_MAGIC, 0)
+/**
+ * DOC: XSDFEC_STOP_DEV
+ *
+ * @Description
+ *
+ * ioctl to stop the SD-FEC core
+ */
+#define XSDFEC_STOP_DEV _IO(XSDFEC_MAGIC, 1)
+/**
+ * DOC: XSDFEC_GET_STATUS
+ *
+ * @Description
+ *
+ * ioctl that returns status of SD-FEC core
+ */
+#define XSDFEC_GET_STATUS _IOR(XSDFEC_MAGIC, 2, struct xsdfec_status)
+/**
+ * DOC: XSDFEC_SET_IRQ
+ * @Parameters
+ *
+ * @struct xsdfec_irq *
+ * Pointer to the &struct xsdfec_irq that contains the interrupt settings
+ * for the SD-FEC core
+ *
+ * @Description
+ *
+ * ioctl to enable or disable irq
+ */
+#define XSDFEC_SET_IRQ _IOW(XSDFEC_MAGIC, 3, struct xsdfec_irq)
+/**
+ * DOC: XSDFEC_SET_TURBO
+ * @Parameters
+ *
+ * @struct xsdfec_turbo *
+ * Pointer to the &struct xsdfec_turbo that contains the Turbo decode
+ * settings for the SD-FEC core
+ *
+ * @Description
+ *
+ * ioctl that sets the SD-FEC Turbo parameter values
+ *
+ * This can only be used when the driver is in the XSDFEC_STOPPED state
+ */
+#define XSDFEC_SET_TURBO _IOW(XSDFEC_MAGIC, 4, struct xsdfec_turbo)
+/**
+ * DOC: XSDFEC_ADD_LDPC_CODE_PARAMS
+ * @Parameters
+ *
+ * @struct xsdfec_ldpc_params *
+ * Pointer to the &struct xsdfec_ldpc_params that contains the LDPC code
+ * parameters to be added to the SD-FEC Block
+ *
+ * @Description
+ * ioctl to add an LDPC code to the SD-FEC LDPC codes
+ *
+ * This can only be used when:
+ *
+ * - Driver is in the XSDFEC_STOPPED state
+ *
+ * - SD-FEC core is configured as LPDC
+ *
+ * - SD-FEC Code Write Protection is disabled
+ */
+#define XSDFEC_ADD_LDPC_CODE_PARAMS \
+ _IOW(XSDFEC_MAGIC, 5, struct xsdfec_ldpc_params)
+/**
+ * DOC: XSDFEC_GET_CONFIG
+ * @Parameters
+ *
+ * @struct xsdfec_config *
+ * Pointer to the &struct xsdfec_config that contains the current
+ * configuration settings of the SD-FEC Block
+ *
+ * @Description
+ *
+ * ioctl that returns SD-FEC core configuration
+ */
+#define XSDFEC_GET_CONFIG _IOR(XSDFEC_MAGIC, 6, struct xsdfec_config)
+/**
+ * DOC: XSDFEC_GET_TURBO
+ * @Parameters
+ *
+ * @struct xsdfec_turbo *
+ * Pointer to the &struct xsdfec_turbo that contains the current Turbo
+ * decode settings of the SD-FEC Block
+ *
+ * @Description
+ *
+ * ioctl that returns SD-FEC turbo param values
+ */
+#define XSDFEC_GET_TURBO _IOR(XSDFEC_MAGIC, 7, struct xsdfec_turbo)
+/**
+ * DOC: XSDFEC_SET_ORDER
+ * @Parameters
+ *
+ * @struct unsigned long *
+ * Pointer to the unsigned long that contains a value from the
+ * @enum xsdfec_order
+ *
+ * @Description
+ *
+ * ioctl that sets order, if order of blocks can change from input to output
+ *
+ * This can only be used when the driver is in the XSDFEC_STOPPED state
+ */
+#define XSDFEC_SET_ORDER _IOW(XSDFEC_MAGIC, 8, unsigned long)
+/**
+ * DOC: XSDFEC_SET_BYPASS
+ * @Parameters
+ *
+ * @struct bool *
+ * Pointer to bool that sets the bypass value, where false results in
+ * normal operation and false results in the SD-FEC performing the
+ * configured operations (same number of cycles) but output data matches
+ * the input data
+ *
+ * @Description
+ *
+ * ioctl that sets bypass.
+ *
+ * This can only be used when the driver is in the XSDFEC_STOPPED state
+ */
+#define XSDFEC_SET_BYPASS _IOW(XSDFEC_MAGIC, 9, bool)
+/**
+ * DOC: XSDFEC_IS_ACTIVE
+ * @Parameters
+ *
+ * @struct bool *
+ * Pointer to bool that returns true if the SD-FEC is processing data
+ *
+ * @Description
+ *
+ * ioctl that determines if SD-FEC is processing data
+ */
+#define XSDFEC_IS_ACTIVE _IOR(XSDFEC_MAGIC, 10, bool)
+/**
+ * DOC: XSDFEC_CLEAR_STATS
+ *
+ * @Description
+ *
+ * ioctl that clears error stats collected during interrupts
+ */
+#define XSDFEC_CLEAR_STATS _IO(XSDFEC_MAGIC, 11)
+/**
+ * DOC: XSDFEC_GET_STATS
+ * @Parameters
+ *
+ * @struct xsdfec_stats *
+ * Pointer to the &struct xsdfec_stats that will contain the updated stats
+ * values
+ *
+ * @Description
+ *
+ * ioctl that returns SD-FEC core stats
+ *
+ * This can only be used when the driver is in the XSDFEC_STOPPED state
+ */
+#define XSDFEC_GET_STATS _IOR(XSDFEC_MAGIC, 12, struct xsdfec_stats)
+/**
+ * DOC: XSDFEC_SET_DEFAULT_CONFIG
+ *
+ * @Description
+ *
+ * ioctl that returns SD-FEC core to default config, use after a reset
+ *
+ * This can only be used when the driver is in the XSDFEC_STOPPED state
+ */
+#define XSDFEC_SET_DEFAULT_CONFIG _IO(XSDFEC_MAGIC, 13)
+
+#endif /* __XILINX_SDFEC_H__ */
diff --git a/lib/test_firmware.c b/lib/test_firmware.c
index 6ca97a63b3d6..251213c872b5 100644
--- a/lib/test_firmware.c
+++ b/lib/test_firmware.c
@@ -18,6 +18,7 @@
#include <linux/device.h>
#include <linux/fs.h>
#include <linux/miscdevice.h>
+#include <linux/sizes.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/delay.h>
@@ -26,6 +27,7 @@
#define TEST_FIRMWARE_NAME "test-firmware.bin"
#define TEST_FIRMWARE_NUM_REQS 4
+#define TEST_FIRMWARE_BUF_SIZE SZ_1K
static DEFINE_MUTEX(test_fw_mutex);
static const struct firmware *test_firmware;
@@ -45,6 +47,8 @@ struct test_batched_req {
* test_config - represents configuration for the test for different triggers
*
* @name: the name of the firmware file to look for
+ * @into_buf: when the into_buf is used if this is true
+ * request_firmware_into_buf() will be used instead.
* @sync_direct: when the sync trigger is used if this is true
* request_firmware_direct() will be used instead.
* @send_uevent: whether or not to send a uevent for async requests
@@ -83,6 +87,7 @@ struct test_batched_req {
*/
struct test_config {
char *name;
+ bool into_buf;
bool sync_direct;
bool send_uevent;
u8 num_requests;
@@ -176,6 +181,7 @@ static int __test_firmware_config_init(void)
test_fw_config->num_requests = TEST_FIRMWARE_NUM_REQS;
test_fw_config->send_uevent = true;
+ test_fw_config->into_buf = false;
test_fw_config->sync_direct = false;
test_fw_config->req_firmware = request_firmware;
test_fw_config->test_result = 0;
@@ -245,6 +251,9 @@ static ssize_t config_show(struct device *dev,
"FW_ACTION_HOTPLUG" :
"FW_ACTION_NOHOTPLUG");
len += scnprintf(buf+len, PAGE_SIZE - len,
+ "into_buf:\t\t%s\n",
+ test_fw_config->into_buf ? "true" : "false");
+ len += scnprintf(buf+len, PAGE_SIZE - len,
"sync_direct:\t\t%s\n",
test_fw_config->sync_direct ? "true" : "false");
len += scnprintf(buf+len, PAGE_SIZE - len,
@@ -393,6 +402,23 @@ static ssize_t config_num_requests_show(struct device *dev,
}
static DEVICE_ATTR_RW(config_num_requests);
+static ssize_t config_into_buf_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return test_dev_config_update_bool(buf,
+ count,
+ &test_fw_config->into_buf);
+}
+
+static ssize_t config_into_buf_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return test_dev_config_show_bool(buf, test_fw_config->into_buf);
+}
+static DEVICE_ATTR_RW(config_into_buf);
+
static ssize_t config_sync_direct_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
@@ -522,7 +548,7 @@ static ssize_t trigger_async_request_store(struct device *dev,
rc = count;
} else {
pr_err("failed to async load firmware\n");
- rc = -ENODEV;
+ rc = -ENOMEM;
}
out:
@@ -585,7 +611,26 @@ static int test_fw_run_batch_request(void *data)
return -EINVAL;
}
- req->rc = test_fw_config->req_firmware(&req->fw, req->name, req->dev);
+ if (test_fw_config->into_buf) {
+ void *test_buf;
+
+ test_buf = kzalloc(TEST_FIRMWARE_BUF_SIZE, GFP_KERNEL);
+ if (!test_buf)
+ return -ENOSPC;
+
+ req->rc = request_firmware_into_buf(&req->fw,
+ req->name,
+ req->dev,
+ test_buf,
+ TEST_FIRMWARE_BUF_SIZE);
+ if (!req->fw)
+ kfree(test_buf);
+ } else {
+ req->rc = test_fw_config->req_firmware(&req->fw,
+ req->name,
+ req->dev);
+ }
+
if (req->rc) {
pr_info("#%u: batched sync load failed: %d\n",
req->idx, req->rc);
@@ -849,6 +894,7 @@ static struct attribute *test_dev_attrs[] = {
TEST_FW_DEV_ATTR(config),
TEST_FW_DEV_ATTR(config_name),
TEST_FW_DEV_ATTR(config_num_requests),
+ TEST_FW_DEV_ATTR(config_into_buf),
TEST_FW_DEV_ATTR(config_sync_direct),
TEST_FW_DEV_ATTR(config_send_uevent),
TEST_FW_DEV_ATTR(config_read_fw_idx),
diff --git a/tools/testing/selftests/firmware/fw_filesystem.sh b/tools/testing/selftests/firmware/fw_filesystem.sh
index f901076aa2ea..56894477c8bd 100755
--- a/tools/testing/selftests/firmware/fw_filesystem.sh
+++ b/tools/testing/selftests/firmware/fw_filesystem.sh
@@ -116,6 +116,16 @@ config_set_name()
echo -n $1 > $DIR/config_name
}
+config_set_into_buf()
+{
+ echo 1 > $DIR/config_into_buf
+}
+
+config_unset_into_buf()
+{
+ echo 0 > $DIR/config_into_buf
+}
+
config_set_sync_direct()
{
echo 1 > $DIR/config_sync_direct
@@ -153,11 +163,14 @@ config_set_read_fw_idx()
read_firmwares()
{
- if [ "$1" = "xzonly" ]; then
- fwfile="${FW}-orig"
+ if [ "$(cat $DIR/config_into_buf)" == "1" ]; then
+ fwfile="$FW_INTO_BUF"
else
fwfile="$FW"
fi
+ if [ "$1" = "xzonly" ]; then
+ fwfile="${fwfile}-orig"
+ fi
for i in $(seq 0 3); do
config_set_read_fw_idx $i
# Verify the contents are what we expect.
@@ -194,6 +207,18 @@ test_batched_request_firmware_nofile()
echo "OK"
}
+test_batched_request_firmware_into_buf_nofile()
+{
+ echo -n "Batched request_firmware_into_buf() nofile try #$1: "
+ config_reset
+ config_set_name nope-test-firmware.bin
+ config_set_into_buf
+ config_trigger_sync
+ read_firmwares_expect_nofile
+ release_all_firmware
+ echo "OK"
+}
+
test_batched_request_firmware_direct_nofile()
{
echo -n "Batched request_firmware_direct() nofile try #$1: "
@@ -259,6 +284,18 @@ test_batched_request_firmware()
echo "OK"
}
+test_batched_request_firmware_into_buf()
+{
+ echo -n "Batched request_firmware_into_buf() $2 try #$1: "
+ config_reset
+ config_set_name $TEST_FIRMWARE_INTO_BUF_FILENAME
+ config_set_into_buf
+ config_trigger_sync
+ read_firmwares $2
+ release_all_firmware
+ echo "OK"
+}
+
test_batched_request_firmware_direct()
{
echo -n "Batched request_firmware_direct() $2 try #$1: "
@@ -308,6 +345,10 @@ for i in $(seq 1 5); do
done
for i in $(seq 1 5); do
+ test_batched_request_firmware_into_buf $i normal
+done
+
+for i in $(seq 1 5); do
test_batched_request_firmware_direct $i normal
done
@@ -328,6 +369,10 @@ for i in $(seq 1 5); do
done
for i in $(seq 1 5); do
+ test_batched_request_firmware_into_buf_nofile $i
+done
+
+for i in $(seq 1 5); do
test_batched_request_firmware_direct_nofile $i
done
@@ -351,6 +396,10 @@ for i in $(seq 1 5); do
done
for i in $(seq 1 5); do
+ test_batched_request_firmware_into_buf $i both
+done
+
+for i in $(seq 1 5); do
test_batched_request_firmware_direct $i both
done
@@ -371,6 +420,10 @@ for i in $(seq 1 5); do
done
for i in $(seq 1 5); do
+ test_batched_request_firmware_into_buf $i xzonly
+done
+
+for i in $(seq 1 5); do
test_batched_request_firmware_direct $i xzonly
done
diff --git a/tools/testing/selftests/firmware/fw_lib.sh b/tools/testing/selftests/firmware/fw_lib.sh
index f236cc295450..b879305a766d 100755
--- a/tools/testing/selftests/firmware/fw_lib.sh
+++ b/tools/testing/selftests/firmware/fw_lib.sh
@@ -9,6 +9,12 @@ DIR=/sys/devices/virtual/misc/test_firmware
PROC_CONFIG="/proc/config.gz"
TEST_DIR=$(dirname $0)
+# We need to load a different file to test request_firmware_into_buf
+# I believe the issue is firmware loaded cached vs. non-cached
+# with same filename is bungled.
+# To reproduce rename this to test-firmware.bin
+TEST_FIRMWARE_INTO_BUF_FILENAME=test-firmware-into-buf.bin
+
# Kselftest framework requirement - SKIP code is 4.
ksft_skip=4
@@ -108,6 +114,8 @@ setup_tmp_file()
FWPATH=$(mktemp -d)
FW="$FWPATH/test-firmware.bin"
echo "ABCD0123" >"$FW"
+ FW_INTO_BUF="$FWPATH/$TEST_FIRMWARE_INTO_BUF_FILENAME"
+ echo "EFGH4567" >"$FW_INTO_BUF"
NAME=$(basename "$FW")
if [ "$TEST_REQS_FW_SET_CUSTOM_PATH" = "yes" ]; then
echo -n "$FWPATH" >/sys/module/firmware_class/parameters/path
@@ -175,6 +183,9 @@ test_finish()
if [ -f $FW ]; then
rm -f "$FW"
fi
+ if [ -f $FW_INTO_BUF ]; then
+ rm -f "$FW_INTO_BUF"
+ fi
if [ -d $FWPATH ]; then
rm -rf "$FWPATH"
fi