summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/testing/sysfs-platform-wilco-ec17
-rw-r--r--drivers/iio/accel/cros_ec_accel_legacy.c6
-rw-r--r--drivers/iio/common/cros_ec_sensors/Kconfig2
-rw-r--r--drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c6
-rw-r--r--drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c4
-rw-r--r--drivers/iio/light/cros_ec_light_prox.c6
-rw-r--r--drivers/input/keyboard/cros_ec_keyb.c6
-rw-r--r--drivers/mfd/cros_ec_dev.c235
-rw-r--r--drivers/platform/chrome/Kconfig19
-rw-r--r--drivers/platform/chrome/Makefile1
-rw-r--r--drivers/platform/chrome/cros_ec.c84
-rw-r--r--drivers/platform/chrome/cros_ec_ishtp.c25
-rw-r--r--drivers/platform/chrome/cros_ec_lpc.c17
-rw-r--r--drivers/platform/chrome/cros_ec_proto.c267
-rw-r--r--drivers/platform/chrome/cros_ec_rpmsg.c19
-rw-r--r--drivers/platform/chrome/cros_ec_sensorhub.c199
-rw-r--r--drivers/platform/chrome/cros_usbpd_logger.c1
-rw-r--r--drivers/platform/chrome/wilco_ec/Kconfig2
-rw-r--r--drivers/platform/chrome/wilco_ec/Makefile3
-rw-r--r--drivers/platform/chrome/wilco_ec/core.c28
-rw-r--r--drivers/platform/chrome/wilco_ec/debugfs.c47
-rw-r--r--drivers/platform/chrome/wilco_ec/keyboard_leds.c191
-rw-r--r--drivers/platform/chrome/wilco_ec/sysfs.c91
-rw-r--r--drivers/platform/chrome/wilco_ec/telemetry.c2
-rw-r--r--include/linux/platform_data/cros_ec_proto.h138
-rw-r--r--include/linux/platform_data/cros_ec_sensorhub.h30
-rw-r--r--include/linux/platform_data/wilco-ec.h15
27 files changed, 1019 insertions, 442 deletions
diff --git a/Documentation/ABI/testing/sysfs-platform-wilco-ec b/Documentation/ABI/testing/sysfs-platform-wilco-ec
index 8827a734f933..5f60b184a5a5 100644
--- a/Documentation/ABI/testing/sysfs-platform-wilco-ec
+++ b/Documentation/ABI/testing/sysfs-platform-wilco-ec
@@ -31,6 +31,23 @@ Description:
Output will a version string be similar to the example below:
08B6
+What: /sys/bus/platform/devices/GOOG000C\:00/usb_charge
+Date: October 2019
+KernelVersion: 5.5
+Description:
+ Control the USB PowerShare Policy. USB PowerShare is a policy
+ which affects charging via the special USB PowerShare port
+ (marked with a small lightning bolt or battery icon) when in
+ low power states:
+ - In S0, the port will always provide power.
+ - In S0ix, if usb_charge is enabled, then power will be
+ supplied to the port when on AC or if battery is > 50%.
+ Else no power is supplied.
+ - In S5, if usb_charge is enabled, then power will be supplied
+ to the port when on AC. Else no power is supplied.
+
+ Input should be either "0" or "1".
+
What: /sys/bus/platform/devices/GOOG000C\:00/version
Date: May 2019
KernelVersion: 5.3
diff --git a/drivers/iio/accel/cros_ec_accel_legacy.c b/drivers/iio/accel/cros_ec_accel_legacy.c
index fcc3f999e482..65f85faf6f31 100644
--- a/drivers/iio/accel/cros_ec_accel_legacy.c
+++ b/drivers/iio/accel/cros_ec_accel_legacy.c
@@ -163,16 +163,10 @@ static const struct iio_chan_spec cros_ec_accel_legacy_channels[] = {
static int cros_ec_accel_legacy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct cros_ec_dev *ec = dev_get_drvdata(dev->parent);
struct iio_dev *indio_dev;
struct cros_ec_sensors_core_state *state;
int ret;
- if (!ec || !ec->ec_dev) {
- dev_warn(&pdev->dev, "No EC device found.\n");
- return -EINVAL;
- }
-
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*state));
if (!indio_dev)
return -ENOMEM;
diff --git a/drivers/iio/common/cros_ec_sensors/Kconfig b/drivers/iio/common/cros_ec_sensors/Kconfig
index cdbb29cfb907..fefad9572790 100644
--- a/drivers/iio/common/cros_ec_sensors/Kconfig
+++ b/drivers/iio/common/cros_ec_sensors/Kconfig
@@ -4,7 +4,7 @@
#
config IIO_CROS_EC_SENSORS_CORE
tristate "ChromeOS EC Sensors Core"
- depends on SYSFS && CROS_EC
+ depends on SYSFS && CROS_EC_SENSORHUB
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
index a6987726eeb8..7dce04473467 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
@@ -222,17 +222,11 @@ static const struct iio_info ec_sensors_info = {
static int cros_ec_sensors_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct cros_ec_dev *ec_dev = dev_get_drvdata(dev->parent);
struct iio_dev *indio_dev;
struct cros_ec_sensors_state *state;
struct iio_chan_spec *channel;
int ret, i;
- if (!ec_dev || !ec_dev->ec_dev) {
- dev_warn(&pdev->dev, "No CROS EC device found.\n");
- return -EINVAL;
- }
-
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*state));
if (!indio_dev)
return -ENOMEM;
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
index d2609e6feda4..81a7f692de2f 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
@@ -18,6 +18,7 @@
#include <linux/slab.h>
#include <linux/platform_data/cros_ec_commands.h>
#include <linux/platform_data/cros_ec_proto.h>
+#include <linux/platform_data/cros_ec_sensorhub.h>
#include <linux/platform_device.h>
static char *cros_ec_loc[] = {
@@ -88,7 +89,8 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
{
struct device *dev = &pdev->dev;
struct cros_ec_sensors_core_state *state = iio_priv(indio_dev);
- struct cros_ec_dev *ec = dev_get_drvdata(pdev->dev.parent);
+ struct cros_ec_sensorhub *sensor_hub = dev_get_drvdata(dev->parent);
+ struct cros_ec_dev *ec = sensor_hub->ec;
struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
u32 ver_mask;
int ret, i;
diff --git a/drivers/iio/light/cros_ec_light_prox.c b/drivers/iio/light/cros_ec_light_prox.c
index c5263b563fc1..d85a391e50c5 100644
--- a/drivers/iio/light/cros_ec_light_prox.c
+++ b/drivers/iio/light/cros_ec_light_prox.c
@@ -169,17 +169,11 @@ static const struct iio_info cros_ec_light_prox_info = {
static int cros_ec_light_prox_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct cros_ec_dev *ec_dev = dev_get_drvdata(dev->parent);
struct iio_dev *indio_dev;
struct cros_ec_light_prox_state *state;
struct iio_chan_spec *channel;
int ret;
- if (!ec_dev || !ec_dev->ec_dev) {
- dev_warn(dev, "No CROS EC device found.\n");
- return -EINVAL;
- }
-
indio_dev = devm_iio_device_alloc(dev, sizeof(*state));
if (!indio_dev)
return -ENOMEM;
diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c
index 8d4d9786cc74..2b71c5a51f90 100644
--- a/drivers/input/keyboard/cros_ec_keyb.c
+++ b/drivers/input/keyboard/cros_ec_keyb.c
@@ -226,8 +226,6 @@ static int cros_ec_keyb_work(struct notifier_block *nb,
{
struct cros_ec_keyb *ckdev = container_of(nb, struct cros_ec_keyb,
notifier);
- uint8_t mkbp_event_type = ckdev->ec->event_data.event_type &
- EC_MKBP_EVENT_TYPE_MASK;
u32 val;
unsigned int ev_type;
@@ -239,7 +237,7 @@ static int cros_ec_keyb_work(struct notifier_block *nb,
if (queued_during_suspend && !device_may_wakeup(ckdev->dev))
return NOTIFY_OK;
- switch (mkbp_event_type) {
+ switch (ckdev->ec->event_data.event_type) {
case EC_MKBP_EVENT_KEY_MATRIX:
pm_wakeup_event(ckdev->dev, 0);
@@ -266,7 +264,7 @@ static int cros_ec_keyb_work(struct notifier_block *nb,
case EC_MKBP_EVENT_SWITCH:
pm_wakeup_event(ckdev->dev, 0);
- if (mkbp_event_type == EC_MKBP_EVENT_BUTTON) {
+ if (ckdev->ec->event_data.event_type == EC_MKBP_EVENT_BUTTON) {
val = get_unaligned_le32(
&ckdev->ec->event_data.data.buttons);
ev_type = EV_KEY;
diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
index 6e6dfd6c1871..c4b977a5dd96 100644
--- a/drivers/mfd/cros_ec_dev.c
+++ b/drivers/mfd/cros_ec_dev.c
@@ -78,6 +78,10 @@ static const struct mfd_cell cros_ec_rtc_cells[] = {
{ .name = "cros-ec-rtc", },
};
+static const struct mfd_cell cros_ec_sensorhub_cells[] = {
+ { .name = "cros-ec-sensorhub", },
+};
+
static const struct mfd_cell cros_usbpd_charger_cells[] = {
{ .name = "cros-usbpd-charger", },
{ .name = "cros-usbpd-logger", },
@@ -112,229 +116,11 @@ static const struct mfd_cell cros_ec_vbc_cells[] = {
{ .name = "cros-ec-vbc", }
};
-static int cros_ec_check_features(struct cros_ec_dev *ec, int feature)
-{
- struct cros_ec_command *msg;
- int ret;
-
- if (ec->features[0] == -1U && ec->features[1] == -1U) {
- /* features bitmap not read yet */
- msg = kzalloc(sizeof(*msg) + sizeof(ec->features), GFP_KERNEL);
- if (!msg)
- return -ENOMEM;
-
- msg->command = EC_CMD_GET_FEATURES + ec->cmd_offset;
- msg->insize = sizeof(ec->features);
-
- ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
- if (ret < 0) {
- dev_warn(ec->dev, "cannot get EC features: %d/%d\n",
- ret, msg->result);
- memset(ec->features, 0, sizeof(ec->features));
- } else {
- memcpy(ec->features, msg->data, sizeof(ec->features));
- }
-
- dev_dbg(ec->dev, "EC features %08x %08x\n",
- ec->features[0], ec->features[1]);
-
- kfree(msg);
- }
-
- return ec->features[feature / 32] & EC_FEATURE_MASK_0(feature);
-}
-
static void cros_ec_class_release(struct device *dev)
{
kfree(to_cros_ec_dev(dev));
}
-static void cros_ec_sensors_register(struct cros_ec_dev *ec)
-{
- /*
- * Issue a command to get the number of sensor reported.
- * Build an array of sensors driver and register them all.
- */
- int ret, i, id, sensor_num;
- struct mfd_cell *sensor_cells;
- struct cros_ec_sensor_platform *sensor_platforms;
- int sensor_type[MOTIONSENSE_TYPE_MAX];
- struct ec_params_motion_sense *params;
- struct ec_response_motion_sense *resp;
- struct cros_ec_command *msg;
-
- msg = kzalloc(sizeof(struct cros_ec_command) +
- max(sizeof(*params), sizeof(*resp)), GFP_KERNEL);
- if (msg == NULL)
- return;
-
- msg->version = 2;
- msg->command = EC_CMD_MOTION_SENSE_CMD + ec->cmd_offset;
- msg->outsize = sizeof(*params);
- msg->insize = sizeof(*resp);
-
- params = (struct ec_params_motion_sense *)msg->data;
- params->cmd = MOTIONSENSE_CMD_DUMP;
-
- ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
- if (ret < 0) {
- dev_warn(ec->dev, "cannot get EC sensor information: %d/%d\n",
- ret, msg->result);
- goto error;
- }
-
- resp = (struct ec_response_motion_sense *)msg->data;
- sensor_num = resp->dump.sensor_count;
- /*
- * Allocate 2 extra sensors if lid angle sensor and/or FIFO are needed.
- */
- sensor_cells = kcalloc(sensor_num + 2, sizeof(struct mfd_cell),
- GFP_KERNEL);
- if (sensor_cells == NULL)
- goto error;
-
- sensor_platforms = kcalloc(sensor_num,
- sizeof(struct cros_ec_sensor_platform),
- GFP_KERNEL);
- if (sensor_platforms == NULL)
- goto error_platforms;
-
- memset(sensor_type, 0, sizeof(sensor_type));
- id = 0;
- for (i = 0; i < sensor_num; i++) {
- params->cmd = MOTIONSENSE_CMD_INFO;
- params->info.sensor_num = i;
- ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
- if (ret < 0) {
- dev_warn(ec->dev, "no info for EC sensor %d : %d/%d\n",
- i, ret, msg->result);
- continue;
- }
- switch (resp->info.type) {
- case MOTIONSENSE_TYPE_ACCEL:
- sensor_cells[id].name = "cros-ec-accel";
- break;
- case MOTIONSENSE_TYPE_BARO:
- sensor_cells[id].name = "cros-ec-baro";
- break;
- case MOTIONSENSE_TYPE_GYRO:
- sensor_cells[id].name = "cros-ec-gyro";
- break;
- case MOTIONSENSE_TYPE_MAG:
- sensor_cells[id].name = "cros-ec-mag";
- break;
- case MOTIONSENSE_TYPE_PROX:
- sensor_cells[id].name = "cros-ec-prox";
- break;
- case MOTIONSENSE_TYPE_LIGHT:
- sensor_cells[id].name = "cros-ec-light";
- break;
- case MOTIONSENSE_TYPE_ACTIVITY:
- sensor_cells[id].name = "cros-ec-activity";
- break;
- default:
- dev_warn(ec->dev, "unknown type %d\n", resp->info.type);
- continue;
- }
- sensor_platforms[id].sensor_num = i;
- sensor_cells[id].id = sensor_type[resp->info.type];
- sensor_cells[id].platform_data = &sensor_platforms[id];
- sensor_cells[id].pdata_size =
- sizeof(struct cros_ec_sensor_platform);
-
- sensor_type[resp->info.type]++;
- id++;
- }
-
- if (sensor_type[MOTIONSENSE_TYPE_ACCEL] >= 2)
- ec->has_kb_wake_angle = true;
-
- if (cros_ec_check_features(ec, EC_FEATURE_MOTION_SENSE_FIFO)) {
- sensor_cells[id].name = "cros-ec-ring";
- id++;
- }
- if (cros_ec_check_features(ec,
- EC_FEATURE_REFINED_TABLET_MODE_HYSTERESIS)) {
- sensor_cells[id].name = "cros-ec-lid-angle";
- id++;
- }
-
- ret = mfd_add_devices(ec->dev, 0, sensor_cells, id,
- NULL, 0, NULL);
- if (ret)
- dev_err(ec->dev, "failed to add EC sensors\n");
-
- kfree(sensor_platforms);
-error_platforms:
- kfree(sensor_cells);
-error:
- kfree(msg);
-}
-
-static struct cros_ec_sensor_platform sensor_platforms[] = {
- { .sensor_num = 0 },
- { .sensor_num = 1 }
-};
-
-static const struct mfd_cell cros_ec_accel_legacy_cells[] = {
- {
- .name = "cros-ec-accel-legacy",
- .platform_data = &sensor_platforms[0],
- .pdata_size = sizeof(struct cros_ec_sensor_platform),
- },
- {
- .name = "cros-ec-accel-legacy",
- .platform_data = &sensor_platforms[1],
- .pdata_size = sizeof(struct cros_ec_sensor_platform),
- }
-};
-
-static void cros_ec_accel_legacy_register(struct cros_ec_dev *ec)
-{
- struct cros_ec_device *ec_dev = ec->ec_dev;
- u8 status;
- int ret;
-
- /*
- * ECs that need legacy support are the main EC, directly connected to
- * the AP.
- */
- if (ec->cmd_offset != 0)
- return;
-
- /*
- * Check if EC supports direct memory reads and if EC has
- * accelerometers.
- */
- if (ec_dev->cmd_readmem) {
- ret = ec_dev->cmd_readmem(ec_dev, EC_MEMMAP_ACC_STATUS, 1,
- &status);
- if (ret < 0) {
- dev_warn(ec->dev, "EC direct read error.\n");
- return;
- }
-
- /* Check if EC has accelerometers. */
- if (!(status & EC_MEMMAP_ACC_STATUS_PRESENCE_BIT)) {
- dev_info(ec->dev, "EC does not have accelerometers.\n");
- return;
- }
- }
-
- /*
- * The device may still support accelerometers:
- * it would be an older ARM based device that do not suppor the
- * EC_CMD_GET_FEATURES command.
- *
- * Register 2 accelerometers, we will fail in the IIO driver if there
- * are no sensors.
- */
- ret = mfd_add_hotplug_devices(ec->dev, cros_ec_accel_legacy_cells,
- ARRAY_SIZE(cros_ec_accel_legacy_cells));
- if (ret)
- dev_err(ec_dev->dev, "failed to add EC sensors\n");
-}
-
static int ec_device_probe(struct platform_device *pdev)
{
int retval = -ENOMEM;
@@ -390,11 +176,14 @@ static int ec_device_probe(struct platform_device *pdev)
goto failed;
/* check whether this EC is a sensor hub. */
- if (cros_ec_check_features(ec, EC_FEATURE_MOTION_SENSE))
- cros_ec_sensors_register(ec);
- else
- /* Workaroud for older EC firmware */
- cros_ec_accel_legacy_register(ec);
+ if (cros_ec_get_sensor_count(ec) > 0) {
+ retval = mfd_add_hotplug_devices(ec->dev,
+ cros_ec_sensorhub_cells,
+ ARRAY_SIZE(cros_ec_sensorhub_cells));
+ if (retval)
+ dev_err(ec->dev, "failed to add %s subdevice: %d\n",
+ cros_ec_sensorhub_cells->name, retval);
+ }
/*
* The following subdevices can be detected by sending the
diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig
index ee5f08ea57b6..5f57282a28da 100644
--- a/drivers/platform/chrome/Kconfig
+++ b/drivers/platform/chrome/Kconfig
@@ -132,9 +132,9 @@ config CROS_EC_LPC
module will be called cros_ec_lpcs.
config CROS_EC_PROTO
- bool
- help
- ChromeOS EC communication protocol helpers.
+ bool
+ help
+ ChromeOS EC communication protocol helpers.
config CROS_KBD_LED_BACKLIGHT
tristate "Backlight LED support for Chrome OS keyboards"
@@ -190,6 +190,19 @@ config CROS_EC_DEBUGFS
To compile this driver as a module, choose M here: the
module will be called cros_ec_debugfs.
+config CROS_EC_SENSORHUB
+ tristate "ChromeOS EC MEMS Sensor Hub"
+ depends on MFD_CROS_EC_DEV
+ default MFD_CROS_EC_DEV
+ help
+ Allow loading IIO sensors. This driver is loaded by MFD and will in
+ turn query the EC and register the sensors.
+ It also spreads the sensor data coming from the EC to the IIO sensor
+ object.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cros_ec_sensorhub.
+
config CROS_EC_SYSFS
tristate "ChromeOS EC control and information through sysfs"
depends on MFD_CROS_EC_DEV && SYSFS
diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile
index 477ec3d1d1c9..aacd5920d8a1 100644
--- a/drivers/platform/chrome/Makefile
+++ b/drivers/platform/chrome/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_CROS_EC_CHARDEV) += cros_ec_chardev.o
obj-$(CONFIG_CROS_EC_LIGHTBAR) += cros_ec_lightbar.o
obj-$(CONFIG_CROS_EC_VBC) += cros_ec_vbc.o
obj-$(CONFIG_CROS_EC_DEBUGFS) += cros_ec_debugfs.o
+obj-$(CONFIG_CROS_EC_SENSORHUB) += cros_ec_sensorhub.o
obj-$(CONFIG_CROS_EC_SYSFS) += cros_ec_sysfs.o
obj-$(CONFIG_CROS_USBPD_LOGGER) += cros_usbpd_logger.o
diff --git a/drivers/platform/chrome/cros_ec.c b/drivers/platform/chrome/cros_ec.c
index fd77e6fa74c2..6d6ce86a1408 100644
--- a/drivers/platform/chrome/cros_ec.c
+++ b/drivers/platform/chrome/cros_ec.c
@@ -31,13 +31,32 @@ static struct cros_ec_platform pd_p = {
.cmd_offset = EC_CMD_PASSTHRU_OFFSET(CROS_EC_DEV_PD_INDEX),
};
-static irqreturn_t ec_irq_thread(int irq, void *data)
+static irqreturn_t ec_irq_handler(int irq, void *data)
{
struct cros_ec_device *ec_dev = data;
- bool wake_event = true;
+
+ ec_dev->last_event_time = cros_ec_get_time_ns();
+
+ return IRQ_WAKE_THREAD;
+}
+
+/**
+ * cros_ec_handle_event() - process and forward pending events on EC
+ * @ec_dev: Device with events to process.
+ *
+ * Call this function in a loop when the kernel is notified that the EC has
+ * pending events.
+ *
+ * Return: true if more events are still pending and this function should be
+ * called again.
+ */
+bool cros_ec_handle_event(struct cros_ec_device *ec_dev)
+{
+ bool wake_event;
+ bool ec_has_more_events;
int ret;
- ret = cros_ec_get_next_event(ec_dev, &wake_event);
+ ret = cros_ec_get_next_event(ec_dev, &wake_event, &ec_has_more_events);
/*
* Signal only if wake host events or any interrupt if
@@ -50,6 +69,20 @@ static irqreturn_t ec_irq_thread(int irq, void *data)
if (ret > 0)
blocking_notifier_call_chain(&ec_dev->event_notifier,
0, ec_dev);
+
+ return ec_has_more_events;
+}
+EXPORT_SYMBOL(cros_ec_handle_event);
+
+static irqreturn_t ec_irq_thread(int irq, void *data)
+{
+ struct cros_ec_device *ec_dev = data;
+ bool ec_has_more_events;
+
+ do {
+ ec_has_more_events = cros_ec_handle_event(ec_dev);
+ } while (ec_has_more_events);
+
return IRQ_HANDLED;
}
@@ -104,6 +137,15 @@ static int cros_ec_sleep_event(struct cros_ec_device *ec_dev, u8 sleep_event)
return ret;
}
+/**
+ * cros_ec_register() - Register a new ChromeOS EC, using the provided info.
+ * @ec_dev: Device to register.
+ *
+ * Before calling this, allocate a pointer to a new device and then fill
+ * in all the fields up to the --private-- marker.
+ *
+ * Return: 0 on success or negative error code.
+ */
int cros_ec_register(struct cros_ec_device *ec_dev)
{
struct device *dev = ec_dev->dev;
@@ -131,10 +173,12 @@ int cros_ec_register(struct cros_ec_device *ec_dev)
return err;
}
- if (ec_dev->irq) {
- err = devm_request_threaded_irq(dev, ec_dev->irq, NULL,
- ec_irq_thread, IRQF_TRIGGER_LOW | IRQF_ONESHOT,
- "chromeos-ec", ec_dev);
+ if (ec_dev->irq > 0) {
+ err = devm_request_threaded_irq(dev, ec_dev->irq,
+ ec_irq_handler,
+ ec_irq_thread,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ "chromeos-ec", ec_dev);
if (err) {
dev_err(dev, "Failed to request IRQ %d: %d",
ec_dev->irq, err);
@@ -198,6 +242,14 @@ int cros_ec_register(struct cros_ec_device *ec_dev)
}
EXPORT_SYMBOL(cros_ec_register);
+/**
+ * cros_ec_unregister() - Remove a ChromeOS EC.
+ * @ec_dev: Device to unregister.
+ *
+ * Call this to deregister a ChromeOS EC, then clean up any private data.
+ *
+ * Return: 0 on success or negative error code.
+ */
int cros_ec_unregister(struct cros_ec_device *ec_dev)
{
if (ec_dev->pd)
@@ -209,6 +261,14 @@ int cros_ec_unregister(struct cros_ec_device *ec_dev)
EXPORT_SYMBOL(cros_ec_unregister);
#ifdef CONFIG_PM_SLEEP
+/**
+ * cros_ec_suspend() - Handle a suspend operation for the ChromeOS EC device.
+ * @ec_dev: Device to suspend.
+ *
+ * This can be called by drivers to handle a suspend event.
+ *
+ * Return: 0 on success or negative error code.
+ */
int cros_ec_suspend(struct cros_ec_device *ec_dev)
{
struct device *dev = ec_dev->dev;
@@ -238,11 +298,19 @@ EXPORT_SYMBOL(cros_ec_suspend);
static void cros_ec_report_events_during_suspend(struct cros_ec_device *ec_dev)
{
while (ec_dev->mkbp_event_supported &&
- cros_ec_get_next_event(ec_dev, NULL) > 0)
+ cros_ec_get_next_event(ec_dev, NULL, NULL) > 0)
blocking_notifier_call_chain(&ec_dev->event_notifier,
1, ec_dev);
}
+/**
+ * cros_ec_resume() - Handle a resume operation for the ChromeOS EC device.
+ * @ec_dev: Device to resume.
+ *
+ * This can be called by drivers to handle a resume event.
+ *
+ * Return: 0 on success or negative error code.
+ */
int cros_ec_resume(struct cros_ec_device *ec_dev)
{
int ret;
diff --git a/drivers/platform/chrome/cros_ec_ishtp.c b/drivers/platform/chrome/cros_ec_ishtp.c
index 25ca2c894b4d..e5996821d08b 100644
--- a/drivers/platform/chrome/cros_ec_ishtp.c
+++ b/drivers/platform/chrome/cros_ec_ishtp.c
@@ -136,11 +136,11 @@ static void ish_evt_handler(struct work_struct *work)
struct ishtp_cl_data *client_data =
container_of(work, struct ishtp_cl_data, work_ec_evt);
struct cros_ec_device *ec_dev = client_data->ec_dev;
+ bool ec_has_more_events;
- if (cros_ec_get_next_event(ec_dev, NULL) > 0) {
- blocking_notifier_call_chain(&ec_dev->event_notifier,
- 0, ec_dev);
- }
+ do {
+ ec_has_more_events = cros_ec_handle_event(ec_dev);
+ } while (ec_has_more_events);
}
/**
@@ -200,13 +200,14 @@ static int ish_send(struct ishtp_cl_data *client_data,
* process_recv() - Received and parse incoming packet
* @cros_ish_cl: Client instance to get stats
* @rb_in_proc: Host interface message buffer
+ * @timestamp: Timestamp of when parent callback started
*
* Parse the incoming packet. If it is a response packet then it will
* update per instance flags and wake up the caller waiting to for the
* response. If it is an event packet then it will schedule event work.
*/
static void process_recv(struct ishtp_cl *cros_ish_cl,
- struct ishtp_cl_rb *rb_in_proc)
+ struct ishtp_cl_rb *rb_in_proc, ktime_t timestamp)
{
size_t data_len = rb_in_proc->buf_idx;
struct ishtp_cl_data *client_data =
@@ -295,6 +296,11 @@ error_wake_up:
break;
case CROS_MKBP_EVENT:
+ /*
+ * Set timestamp from beginning of function since we actually
+ * got an incoming MKBP event
+ */
+ client_data->ec_dev->last_event_time = timestamp;
/* The event system doesn't send any data in buffer */
schedule_work(&client_data->work_ec_evt);
@@ -322,10 +328,17 @@ static void ish_event_cb(struct ishtp_cl_device *cl_device)
{
struct ishtp_cl_rb *rb_in_proc;
struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device);
+ ktime_t timestamp;
+
+ /*
+ * Take timestamp as close to hardware interrupt as possible for sensor
+ * timestamps.
+ */
+ timestamp = cros_ec_get_time_ns();
while ((rb_in_proc = ishtp_cl_rx_get_rb(cros_ish_cl)) != NULL) {
/* Decide what to do with received data */
- process_recv(cros_ish_cl, rb_in_proc);
+ process_recv(cros_ish_cl, rb_in_proc, timestamp);
}
}
diff --git a/drivers/platform/chrome/cros_ec_lpc.c b/drivers/platform/chrome/cros_ec_lpc.c
index 7d10d909435f..dccf479c6625 100644
--- a/drivers/platform/chrome/cros_ec_lpc.c
+++ b/drivers/platform/chrome/cros_ec_lpc.c
@@ -312,11 +312,20 @@ static int cros_ec_lpc_readmem(struct cros_ec_device *ec, unsigned int offset,
static void cros_ec_lpc_acpi_notify(acpi_handle device, u32 value, void *data)
{
struct cros_ec_device *ec_dev = data;
+ bool ec_has_more_events;
+ int ret;
- if (ec_dev->mkbp_event_supported &&
- cros_ec_get_next_event(ec_dev, NULL) > 0)
- blocking_notifier_call_chain(&ec_dev->event_notifier, 0,
- ec_dev);
+ ec_dev->last_event_time = cros_ec_get_time_ns();
+
+ if (ec_dev->mkbp_event_supported)
+ do {
+ ret = cros_ec_get_next_event(ec_dev, NULL,
+ &ec_has_more_events);
+ if (ret > 0)
+ blocking_notifier_call_chain(
+ &ec_dev->event_notifier, 0,
+ ec_dev);
+ } while (ec_has_more_events);
if (value == ACPI_NOTIFY_DEVICE_WAKE)
pm_system_wakeup();
diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
index f659f96bda12..da1b1c450433 100644
--- a/drivers/platform/chrome/cros_ec_proto.c
+++ b/drivers/platform/chrome/cros_ec_proto.c
@@ -117,6 +117,17 @@ static int send_command(struct cros_ec_device *ec_dev,
return ret;
}
+/**
+ * cros_ec_prepare_tx() - Prepare an outgoing message in the output buffer.
+ * @ec_dev: Device to register.
+ * @msg: Message to write.
+ *
+ * This is intended to be used by all ChromeOS EC drivers, but at present
+ * only SPI uses it. Once LPC uses the same protocol it can start using it.
+ * I2C could use it now, with a refactor of the existing code.
+ *
+ * Return: 0 on success or negative error code.
+ */
int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
struct cros_ec_command *msg)
{
@@ -141,6 +152,16 @@ int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
}
EXPORT_SYMBOL(cros_ec_prepare_tx);
+/**
+ * cros_ec_check_result() - Check ec_msg->result.
+ * @ec_dev: EC device.
+ * @msg: Message to check.
+ *
+ * This is used by ChromeOS EC drivers to check the ec_msg->result for
+ * errors and to warn about them.
+ *
+ * Return: 0 on success or negative error code.
+ */
int cros_ec_check_result(struct cros_ec_device *ec_dev,
struct cros_ec_command *msg)
{
@@ -326,6 +347,13 @@ static int cros_ec_get_host_command_version_mask(struct cros_ec_device *ec_dev,
return ret;
}
+/**
+ * cros_ec_query_all() - Query the protocol version supported by the
+ * ChromeOS EC.
+ * @ec_dev: Device to register.
+ *
+ * Return: 0 on success or negative error code.
+ */
int cros_ec_query_all(struct cros_ec_device *ec_dev)
{
struct device *dev = ec_dev->dev;
@@ -428,7 +456,10 @@ int cros_ec_query_all(struct cros_ec_device *ec_dev)
if (ret < 0 || ver_mask == 0)
ec_dev->mkbp_event_supported = 0;
else
- ec_dev->mkbp_event_supported = 1;
+ ec_dev->mkbp_event_supported = fls(ver_mask);
+
+ dev_dbg(ec_dev->dev, "MKBP support version %u\n",
+ ec_dev->mkbp_event_supported - 1);
/* Probe if host sleep v1 is supported for S0ix failure detection. */
ret = cros_ec_get_host_command_version_mask(ec_dev,
@@ -453,6 +484,16 @@ exit:
}
EXPORT_SYMBOL(cros_ec_query_all);
+/**
+ * cros_ec_cmd_xfer() - Send a command to the ChromeOS EC.
+ * @ec_dev: EC device.
+ * @msg: Message to write.
+ *
+ * Call this to send a command to the ChromeOS EC. This should be used
+ * instead of calling the EC's cmd_xfer() callback directly.
+ *
+ * Return: 0 on success or negative error code.
+ */
int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
struct cros_ec_command *msg)
{
@@ -500,6 +541,18 @@ int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
}
EXPORT_SYMBOL(cros_ec_cmd_xfer);
+/**
+ * cros_ec_cmd_xfer_status() - Send a command to the ChromeOS EC.
+ * @ec_dev: EC device.
+ * @msg: Message to write.
+ *
+ * This function is identical to cros_ec_cmd_xfer, except it returns success
+ * status only if both the command was transmitted successfully and the EC
+ * replied with success status. It's not necessary to check msg->result when
+ * using this function.
+ *
+ * Return: The number of bytes transferred on success or negative error code.
+ */
int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
struct cros_ec_command *msg)
{
@@ -519,6 +572,7 @@ EXPORT_SYMBOL(cros_ec_cmd_xfer_status);
static int get_next_event_xfer(struct cros_ec_device *ec_dev,
struct cros_ec_command *msg,
+ struct ec_response_get_next_event_v1 *event,
int version, uint32_t size)
{
int ret;
@@ -531,7 +585,7 @@ static int get_next_event_xfer(struct cros_ec_device *ec_dev,
ret = cros_ec_cmd_xfer(ec_dev, msg);
if (ret > 0) {
ec_dev->event_size = ret - 1;
- memcpy(&ec_dev->event_data, msg->data, ret);
+ ec_dev->event_data = *event;
}
return ret;
@@ -539,30 +593,26 @@ static int get_next_event_xfer(struct cros_ec_device *ec_dev,
static int get_next_event(struct cros_ec_device *ec_dev)
{
- u8 buffer[sizeof(struct cros_ec_command) + sizeof(ec_dev->event_data)];
- struct cros_ec_command *msg = (struct cros_ec_command *)&buffer;
- static int cmd_version = 1;
- int ret;
+ struct {
+ struct cros_ec_command msg;
+ struct ec_response_get_next_event_v1 event;
+ } __packed buf;
+ struct cros_ec_command *msg = &buf.msg;
+ struct ec_response_get_next_event_v1 *event = &buf.event;
+ const int cmd_version = ec_dev->mkbp_event_supported - 1;
+ memset(msg, 0, sizeof(*msg));
if (ec_dev->suspended) {
dev_dbg(ec_dev->dev, "Device suspended.\n");
return -EHOSTDOWN;
}
- if (cmd_version == 1) {
- ret = get_next_event_xfer(ec_dev, msg, cmd_version,
- sizeof(struct ec_response_get_next_event_v1));
- if (ret < 0 || msg->result != EC_RES_INVALID_VERSION)
- return ret;
-
- /* Fallback to version 0 for future send attempts */
- cmd_version = 0;
- }
-
- ret = get_next_event_xfer(ec_dev, msg, cmd_version,
+ if (cmd_version == 0)
+ return get_next_event_xfer(ec_dev, msg, event, 0,
sizeof(struct ec_response_get_next_event));
- return ret;
+ return get_next_event_xfer(ec_dev, msg, event, cmd_version,
+ sizeof(struct ec_response_get_next_event_v1));
}
static int get_keyboard_state_event(struct cros_ec_device *ec_dev)
@@ -584,27 +634,60 @@ static int get_keyboard_state_event(struct cros_ec_device *ec_dev)
return ec_dev->event_size;
}
-int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event)
+/**
+ * cros_ec_get_next_event() - Fetch next event from the ChromeOS EC.
+ * @ec_dev: Device to fetch event from.
+ * @wake_event: Pointer to a bool set to true upon return if the event might be
+ * treated as a wake event. Ignored if null.
+ * @has_more_events: Pointer to bool set to true if more than one event is
+ * pending.
+ * Some EC will set this flag to indicate cros_ec_get_next_event()
+ * can be called multiple times in a row.
+ * It is an optimization to prevent issuing a EC command for
+ * nothing or wait for another interrupt from the EC to process
+ * the next message.
+ * Ignored if null.
+ *
+ * Return: negative error code on errors; 0 for no data; or else number of
+ * bytes received (i.e., an event was retrieved successfully). Event types are
+ * written out to @ec_dev->event_data.event_type on success.
+ */
+int cros_ec_get_next_event(struct cros_ec_device *ec_dev,
+ bool *wake_event,
+ bool *has_more_events)
{
u8 event_type;
u32 host_event;
int ret;
- if (!ec_dev->mkbp_event_supported) {
- ret = get_keyboard_state_event(ec_dev);
- if (ret <= 0)
- return ret;
+ /*
+ * Default value for wake_event.
+ * Wake up on keyboard event, wake up for spurious interrupt or link
+ * error to the EC.
+ */
+ if (wake_event)
+ *wake_event = true;
- if (wake_event)
- *wake_event = true;
+ /*
+ * Default value for has_more_events.
+ * EC will raise another interrupt if AP does not process all events
+ * anyway.
+ */
+ if (has_more_events)
+ *has_more_events = false;
- return ret;
- }
+ if (!ec_dev->mkbp_event_supported)
+ return get_keyboard_state_event(ec_dev);
ret = get_next_event(ec_dev);
if (ret <= 0)
return ret;
+ if (has_more_events)
+ *has_more_events = ec_dev->event_data.event_type &
+ EC_MKBP_HAS_MORE_EVENTS;
+ ec_dev->event_data.event_type &= EC_MKBP_EVENT_TYPE_MASK;
+
if (wake_event) {
event_type = ec_dev->event_data.event_type;
host_event = cros_ec_get_host_event(ec_dev);
@@ -619,15 +702,22 @@ int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event)
else if (host_event &&
!(host_event & ec_dev->host_event_wake_mask))
*wake_event = false;
- /* Consider all other events as wake events. */
- else
- *wake_event = true;
}
return ret;
}
EXPORT_SYMBOL(cros_ec_get_next_event);
+/**
+ * cros_ec_get_host_event() - Return a mask of event set by the ChromeOS EC.
+ * @ec_dev: Device to fetch event from.
+ *
+ * When MKBP is supported, when the EC raises an interrupt, we collect the
+ * events raised and call the functions in the ec notifier. This function
+ * is a helper to know which events are raised.
+ *
+ * Return: 0 on error or non-zero bitmask of one or more EC_HOST_EVENT_*.
+ */
u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev)
{
u32 host_event;
@@ -647,3 +737,120 @@ u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev)
return host_event;
}
EXPORT_SYMBOL(cros_ec_get_host_event);
+
+/**
+ * cros_ec_check_features() - Test for the presence of EC features
+ *
+ * @ec: EC device, does not have to be connected directly to the AP,
+ * can be daisy chained through another device.
+ * @feature: One of ec_feature_code bit.
+ *
+ * Call this function to test whether the ChromeOS EC supports a feature.
+ *
+ * Return: 1 if supported, 0 if not
+ */
+int cros_ec_check_features(struct cros_ec_dev *ec, int feature)
+{
+ struct cros_ec_command *msg;
+ int ret;
+
+ if (ec->features[0] == -1U && ec->features[1] == -1U) {
+ /* features bitmap not read yet */
+ msg = kzalloc(sizeof(*msg) + sizeof(ec->features), GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ msg->command = EC_CMD_GET_FEATURES + ec->cmd_offset;
+ msg->insize = sizeof(ec->features);
+
+ ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
+ if (ret < 0) {
+ dev_warn(ec->dev, "cannot get EC features: %d/%d\n",
+ ret, msg->result);
+ memset(ec->features, 0, sizeof(ec->features));
+ } else {
+ memcpy(ec->features, msg->data, sizeof(ec->features));
+ }
+
+ dev_dbg(ec->dev, "EC features %08x %08x\n",
+ ec->features[0], ec->features[1]);
+
+ kfree(msg);
+ }
+
+ return ec->features[feature / 32] & EC_FEATURE_MASK_0(feature);
+}
+EXPORT_SYMBOL_GPL(cros_ec_check_features);
+
+/**
+ * cros_ec_get_sensor_count() - Return the number of MEMS sensors supported.
+ *
+ * @ec: EC device, does not have to be connected directly to the AP,
+ * can be daisy chained through another device.
+ * Return: < 0 in case of error.
+ */
+int cros_ec_get_sensor_count(struct cros_ec_dev *ec)
+{
+ /*
+ * Issue a command to get the number of sensor reported.
+ * If not supported, check for legacy mode.
+ */
+ int ret, sensor_count;
+ struct ec_params_motion_sense *params;
+ struct ec_response_motion_sense *resp;
+ struct cros_ec_command *msg;
+ struct cros_ec_device *ec_dev = ec->ec_dev;
+ u8 status;
+
+ msg = kzalloc(sizeof(*msg) + max(sizeof(*params), sizeof(*resp)),
+ GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ msg->version = 1;
+ msg->command = EC_CMD_MOTION_SENSE_CMD + ec->cmd_offset;
+ msg->outsize = sizeof(*params);
+ msg->insize = sizeof(*resp);
+
+ params = (struct ec_params_motion_sense *)msg->data;
+ params->cmd = MOTIONSENSE_CMD_DUMP;
+
+ ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
+ if (ret < 0) {
+ sensor_count = ret;
+ } else if (msg->result != EC_RES_SUCCESS) {
+ sensor_count = -EPROTO;
+ } else {
+ resp = (struct ec_response_motion_sense *)msg->data;
+ sensor_count = resp->dump.sensor_count;
+ }
+ kfree(msg);
+
+ /*
+ * Check legacy mode: Let's find out if sensors are accessible
+ * via LPC interface.
+ */
+ if (sensor_count == -EPROTO &&
+ ec->cmd_offset == 0 &&
+ ec_dev->cmd_readmem) {
+ ret = ec_dev->cmd_readmem(ec_dev, EC_MEMMAP_ACC_STATUS,
+ 1, &status);
+ if (ret >= 0 &&
+ (status & EC_MEMMAP_ACC_STATUS_PRESENCE_BIT)) {
+ /*
+ * We have 2 sensors, one in the lid, one in the base.
+ */
+ sensor_count = 2;
+ } else {
+ /*
+ * EC uses LPC interface and no sensors are presented.
+ */
+ sensor_count = 0;
+ }
+ } else if (sensor_count == -EPROTO) {
+ /* EC responded, but does not understand DUMP command. */
+ sensor_count = 0;
+ }
+ return sensor_count;
+}
+EXPORT_SYMBOL_GPL(cros_ec_get_sensor_count);
diff --git a/drivers/platform/chrome/cros_ec_rpmsg.c b/drivers/platform/chrome/cros_ec_rpmsg.c
index 0c3738c3244d..bd068afe43b5 100644
--- a/drivers/platform/chrome/cros_ec_rpmsg.c
+++ b/drivers/platform/chrome/cros_ec_rpmsg.c
@@ -143,22 +143,11 @@ cros_ec_rpmsg_host_event_function(struct work_struct *host_event_work)
struct cros_ec_rpmsg,
host_event_work);
struct cros_ec_device *ec_dev = dev_get_drvdata(&ec_rpmsg->rpdev->dev);
- bool wake_event = true;
- int ret;
-
- ret = cros_ec_get_next_event(ec_dev, &wake_event);
-
- /*
- * Signal only if wake host events or any interrupt if
- * cros_ec_get_next_event() returned an error (default value for
- * wake_event is true)
- */
- if (wake_event && device_may_wakeup(ec_dev->dev))
- pm_wakeup_event(ec_dev->dev, 0);
+ bool ec_has_more_events;
- if (ret > 0)
- blocking_notifier_call_chain(&ec_dev->event_notifier,
- 0, ec_dev);
+ do {
+ ec_has_more_events = cros_ec_handle_event(ec_dev);
+ } while (ec_has_more_events);
}
static int cros_ec_rpmsg_callback(struct rpmsg_device *rpdev, void *data,
diff --git a/drivers/platform/chrome/cros_ec_sensorhub.c b/drivers/platform/chrome/cros_ec_sensorhub.c
new file mode 100644
index 000000000000..04d8879689e9
--- /dev/null
+++ b/drivers/platform/chrome/cros_ec_sensorhub.c
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Sensor HUB driver that discovers sensors behind a ChromeOS Embedded
+ * Controller.
+ *
+ * Copyright 2019 Google LLC
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
+#include <linux/platform_data/cros_ec_sensorhub.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#define DRV_NAME "cros-ec-sensorhub"
+
+static void cros_ec_sensorhub_free_sensor(void *arg)
+{
+ struct platform_device *pdev = arg;
+
+ platform_device_unregister(pdev);
+}
+
+static int cros_ec_sensorhub_allocate_sensor(struct device *parent,
+ char *sensor_name,
+ int sensor_num)
+{
+ struct cros_ec_sensor_platform sensor_platforms = {
+ .sensor_num = sensor_num,
+ };
+ struct platform_device *pdev;
+
+ pdev = platform_device_register_data(parent, sensor_name,
+ PLATFORM_DEVID_AUTO,
+ &sensor_platforms,
+ sizeof(sensor_platforms));
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ return devm_add_action_or_reset(parent,
+ cros_ec_sensorhub_free_sensor,
+ pdev);
+}
+
+static int cros_ec_sensorhub_register(struct device *dev,
+ struct cros_ec_sensorhub *sensorhub)
+{
+ int sensor_type[MOTIONSENSE_TYPE_MAX] = { 0 };
+ struct cros_ec_dev *ec = sensorhub->ec;
+ struct ec_params_motion_sense *params;
+ struct ec_response_motion_sense *resp;
+ struct cros_ec_command *msg;
+ int ret, i, sensor_num;
+ char *name;
+
+ sensor_num = cros_ec_get_sensor_count(ec);
+ if (sensor_num < 0) {
+ dev_err(dev,
+ "Unable to retrieve sensor information (err:%d)\n",
+ sensor_num);
+ return sensor_num;
+ }
+
+ if (sensor_num == 0) {
+ dev_err(dev, "Zero sensors reported.\n");
+ return -EINVAL;
+ }
+
+ /* Prepare a message to send INFO command to each sensor. */
+ msg = kzalloc(sizeof(*msg) + max(sizeof(*params), sizeof(*resp)),
+ GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ msg->version = 1;
+ msg->command = EC_CMD_MOTION_SENSE_CMD + ec->cmd_offset;
+ msg->outsize = sizeof(*params);
+ msg->insize = sizeof(*resp);
+ params = (struct ec_params_motion_sense *)msg->data;
+ resp = (struct ec_response_motion_sense *)msg->data;
+
+ for (i = 0; i < sensor_num; i++) {
+ params->cmd = MOTIONSENSE_CMD_INFO;
+ params->info.sensor_num = i;
+
+ ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
+ if (ret < 0) {
+ dev_warn(dev, "no info for EC sensor %d : %d/%d\n",
+ i, ret, msg->result);
+ continue;
+ }
+
+ switch (resp->info.type) {
+ case MOTIONSENSE_TYPE_ACCEL:
+ name = "cros-ec-accel";
+ break;
+ case MOTIONSENSE_TYPE_BARO:
+ name = "cros-ec-baro";
+ break;
+ case MOTIONSENSE_TYPE_GYRO:
+ name = "cros-ec-gyro";
+ break;
+ case MOTIONSENSE_TYPE_MAG:
+ name = "cros-ec-mag";
+ break;
+ case MOTIONSENSE_TYPE_PROX:
+ name = "cros-ec-prox";
+ break;
+ case MOTIONSENSE_TYPE_LIGHT:
+ name = "cros-ec-light";
+ break;
+ case MOTIONSENSE_TYPE_ACTIVITY:
+ name = "cros-ec-activity";
+ break;
+ default:
+ dev_warn(dev, "unknown type %d\n", resp->info.type);
+ continue;
+ }
+
+ ret = cros_ec_sensorhub_allocate_sensor(dev, name, i);
+ if (ret)
+ goto error;
+
+ sensor_type[resp->info.type]++;
+ }
+
+ if (sensor_type[MOTIONSENSE_TYPE_ACCEL] >= 2)
+ ec->has_kb_wake_angle = true;
+
+ if (cros_ec_check_features(ec,
+ EC_FEATURE_REFINED_TABLET_MODE_HYSTERESIS)) {
+ ret = cros_ec_sensorhub_allocate_sensor(dev,
+ "cros-ec-lid-angle",
+ 0);
+ if (ret)
+ goto error;
+ }
+
+ kfree(msg);
+ return 0;
+
+error:
+ kfree(msg);
+ return ret;
+}
+
+static int cros_ec_sensorhub_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct cros_ec_sensorhub *data;
+ int ret;
+ int i;
+
+ data = devm_kzalloc(dev, sizeof(struct cros_ec_sensorhub), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->ec = dev_get_drvdata(dev->parent);
+ dev_set_drvdata(dev, data);
+
+ /* Check whether this EC is a sensor hub. */
+ if (cros_ec_check_features(data->ec, EC_FEATURE_MOTION_SENSE)) {
+ ret = cros_ec_sensorhub_register(dev, data);
+ if (ret)
+ return ret;
+ } else {
+ /*
+ * If the device has sensors but does not claim to
+ * be a sensor hub, we are in legacy mode.
+ */
+ for (i = 0; i < 2; i++) {
+ ret = cros_ec_sensorhub_allocate_sensor(dev,
+ "cros-ec-accel-legacy", i);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static struct platform_driver cros_ec_sensorhub_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ },
+ .probe = cros_ec_sensorhub_probe,
+};
+
+module_platform_driver(cros_ec_sensorhub_driver);
+
+MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_AUTHOR("Gwendal Grignou <gwendal@chromium.org>");
+MODULE_DESCRIPTION("ChromeOS EC MEMS Sensor Hub Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/platform/chrome/cros_usbpd_logger.c b/drivers/platform/chrome/cros_usbpd_logger.c
index 2430e8b82810..374cdd1e868a 100644
--- a/drivers/platform/chrome/cros_usbpd_logger.c
+++ b/drivers/platform/chrome/cros_usbpd_logger.c
@@ -224,6 +224,7 @@ static int cros_usbpd_logger_remove(struct platform_device *pd)
struct logger_data *logger = platform_get_drvdata(pd);
cancel_delayed_work_sync(&logger->log_work);
+ destroy_workqueue(logger->log_workqueue);
return 0;
}
diff --git a/drivers/platform/chrome/wilco_ec/Kconfig b/drivers/platform/chrome/wilco_ec/Kconfig
index 89007b0bc743..365f30e116ee 100644
--- a/drivers/platform/chrome/wilco_ec/Kconfig
+++ b/drivers/platform/chrome/wilco_ec/Kconfig
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config WILCO_EC
tristate "ChromeOS Wilco Embedded Controller"
- depends on ACPI && X86 && CROS_EC_LPC
+ depends on ACPI && X86 && CROS_EC_LPC && LEDS_CLASS
help
If you say Y here, you get support for talking to the ChromeOS
Wilco EC over an eSPI bus. This uses a simple byte-level protocol
diff --git a/drivers/platform/chrome/wilco_ec/Makefile b/drivers/platform/chrome/wilco_ec/Makefile
index bc817164596e..ecb3145cab18 100644
--- a/drivers/platform/chrome/wilco_ec/Makefile
+++ b/drivers/platform/chrome/wilco_ec/Makefile
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
-wilco_ec-objs := core.o mailbox.o properties.o sysfs.o
+wilco_ec-objs := core.o keyboard_leds.o mailbox.o \
+ properties.o sysfs.o
obj-$(CONFIG_WILCO_EC) += wilco_ec.o
wilco_ec_debugfs-objs := debugfs.o
obj-$(CONFIG_WILCO_EC_DEBUGFS) += wilco_ec_debugfs.o
diff --git a/drivers/platform/chrome/wilco_ec/core.c b/drivers/platform/chrome/wilco_ec/core.c
index 3724bf4b77c6..5210c357feef 100644
--- a/drivers/platform/chrome/wilco_ec/core.c
+++ b/drivers/platform/chrome/wilco_ec/core.c
@@ -5,10 +5,6 @@
* Copyright 2018 Google LLC
*
* This is the entry point for the drivers that control the Wilco EC.
- * This driver is responsible for several tasks:
- * - Initialize the register interface that is used by wilco_ec_mailbox()
- * - Create a platform device which is picked up by the debugfs driver
- * - Create a platform device which is picked up by the RTC driver
*/
#include <linux/acpi.h>
@@ -87,12 +83,31 @@ static int wilco_ec_probe(struct platform_device *pdev)
goto unregister_debugfs;
}
+ /* Set up the keyboard backlight LEDs. */
+ ret = wilco_keyboard_leds_init(ec);
+ if (ret < 0) {
+ dev_err(dev,
+ "Failed to initialize keyboard LEDs: %d\n",
+ ret);
+ goto unregister_rtc;
+ }
+
ret = wilco_ec_add_sysfs(ec);
if (ret < 0) {
dev_err(dev, "Failed to create sysfs entries: %d", ret);
goto unregister_rtc;
}
+ /* Register child device to be found by charger config driver. */
+ ec->charger_pdev = platform_device_register_data(dev, "wilco-charger",
+ PLATFORM_DEVID_AUTO,
+ NULL, 0);
+ if (IS_ERR(ec->charger_pdev)) {
+ dev_err(dev, "Failed to create charger platform device\n");
+ ret = PTR_ERR(ec->charger_pdev);
+ goto remove_sysfs;
+ }
+
/* Register child device that will be found by the telemetry driver. */
ec->telem_pdev = platform_device_register_data(dev, "wilco_telem",
PLATFORM_DEVID_AUTO,
@@ -100,11 +115,13 @@ static int wilco_ec_probe(struct platform_device *pdev)
if (IS_ERR(ec->telem_pdev)) {
dev_err(dev, "Failed to create telemetry platform device\n");
ret = PTR_ERR(ec->telem_pdev);
- goto remove_sysfs;
+ goto unregister_charge_config;
}
return 0;
+unregister_charge_config:
+ platform_device_unregister(ec->charger_pdev);
remove_sysfs:
wilco_ec_remove_sysfs(ec);
unregister_rtc:
@@ -120,6 +137,7 @@ static int wilco_ec_remove(struct platform_device *pdev)
{
struct wilco_ec_device *ec = platform_get_drvdata(pdev);
+ platform_device_unregister(ec->charger_pdev);
wilco_ec_remove_sysfs(ec);
platform_device_unregister(ec->telem_pdev);
platform_device_unregister(ec->rtc_pdev);
diff --git a/drivers/platform/chrome/wilco_ec/debugfs.c b/drivers/platform/chrome/wilco_ec/debugfs.c
index 8d65a1e2f1a3..df5a5f6c3ec6 100644
--- a/drivers/platform/chrome/wilco_ec/debugfs.c
+++ b/drivers/platform/chrome/wilco_ec/debugfs.c
@@ -160,29 +160,29 @@ static const struct file_operations fops_raw = {
#define CMD_KB_CHROME 0x88
#define SUB_CMD_H1_GPIO 0x0A
+#define SUB_CMD_TEST_EVENT 0x0B
-struct h1_gpio_status_request {
+struct ec_request {
u8 cmd; /* Always CMD_KB_CHROME */
u8 reserved;
- u8 sub_cmd; /* Always SUB_CMD_H1_GPIO */
+ u8 sub_cmd;
} __packed;
-struct hi_gpio_status_response {
+struct ec_response {
u8 status; /* 0 if allowed */
- u8 val; /* BIT(0)=ENTRY_TO_FACT_MODE, BIT(1)=SPI_CHROME_SEL */
+ u8 val;
} __packed;
-static int h1_gpio_get(void *arg, u64 *val)
+static int send_ec_cmd(struct wilco_ec_device *ec, u8 sub_cmd, u8 *out_val)
{
- struct wilco_ec_device *ec = arg;
- struct h1_gpio_status_request rq;
- struct hi_gpio_status_response rs;
+ struct ec_request rq;
+ struct ec_response rs;
struct wilco_ec_message msg;
int ret;
memset(&rq, 0, sizeof(rq));
rq.cmd = CMD_KB_CHROME;
- rq.sub_cmd = SUB_CMD_H1_GPIO;
+ rq.sub_cmd = sub_cmd;
memset(&msg, 0, sizeof(msg));
msg.type = WILCO_EC_MSG_LEGACY;
@@ -196,14 +196,39 @@ static int h1_gpio_get(void *arg, u64 *val)
if (rs.status)
return -EIO;
- *val = rs.val;
+ *out_val = rs.val;
return 0;
}
+/**
+ * h1_gpio_get() - Gets h1 gpio status.
+ * @arg: The wilco EC device.
+ * @val: BIT(0)=ENTRY_TO_FACT_MODE, BIT(1)=SPI_CHROME_SEL
+ */
+static int h1_gpio_get(void *arg, u64 *val)
+{
+ return send_ec_cmd(arg, SUB_CMD_H1_GPIO, (u8 *)val);
+}
+
DEFINE_DEBUGFS_ATTRIBUTE(fops_h1_gpio, h1_gpio_get, NULL, "0x%02llx\n");
/**
+ * test_event_set() - Sends command to EC to cause an EC test event.
+ * @arg: The wilco EC device.
+ * @val: unused.
+ */
+static int test_event_set(void *arg, u64 val)
+{
+ u8 ret;
+
+ return send_ec_cmd(arg, SUB_CMD_TEST_EVENT, &ret);
+}
+
+/* Format is unused since it is only required for get method which is NULL */
+DEFINE_DEBUGFS_ATTRIBUTE(fops_test_event, NULL, test_event_set, "%llu\n");
+
+/**
* wilco_ec_debugfs_probe() - Create the debugfs node
* @pdev: The platform device, probably created in core.c
*
@@ -226,6 +251,8 @@ static int wilco_ec_debugfs_probe(struct platform_device *pdev)
debugfs_create_file("raw", 0644, debug_info->dir, NULL, &fops_raw);
debugfs_create_file("h1_gpio", 0444, debug_info->dir, ec,
&fops_h1_gpio);
+ debugfs_create_file("test_event", 0200, debug_info->dir, ec,
+ &fops_test_event);
return 0;
}
diff --git a/drivers/platform/chrome/wilco_ec/keyboard_leds.c b/drivers/platform/chrome/wilco_ec/keyboard_leds.c
new file mode 100644
index 000000000000..bb0edf51dfda
--- /dev/null
+++ b/drivers/platform/chrome/wilco_ec/keyboard_leds.c
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Keyboard backlight LED driver for the Wilco Embedded Controller
+ *
+ * Copyright 2019 Google LLC
+ *
+ * Since the EC will never change the backlight level of its own accord,
+ * we don't need to implement a brightness_get() method.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/platform_data/wilco-ec.h>
+#include <linux/slab.h>
+
+#define WILCO_EC_COMMAND_KBBL 0x75
+#define WILCO_KBBL_MODE_FLAG_PWM BIT(1) /* Set brightness by percent. */
+#define WILCO_KBBL_DEFAULT_BRIGHTNESS 0
+
+struct wilco_keyboard_leds {
+ struct wilco_ec_device *ec;
+ struct led_classdev keyboard;
+};
+
+enum wilco_kbbl_subcommand {
+ WILCO_KBBL_SUBCMD_GET_FEATURES = 0x00,
+ WILCO_KBBL_SUBCMD_GET_STATE = 0x01,
+ WILCO_KBBL_SUBCMD_SET_STATE = 0x02,
+};
+
+/**
+ * struct wilco_keyboard_leds_msg - Message to/from EC for keyboard LED control.
+ * @command: Always WILCO_EC_COMMAND_KBBL.
+ * @status: Set by EC to 0 on success, 0xFF on failure.
+ * @subcmd: One of enum wilco_kbbl_subcommand.
+ * @reserved3: Should be 0.
+ * @mode: Bit flags for used mode, we want to use WILCO_KBBL_MODE_FLAG_PWM.
+ * @reserved5to8: Should be 0.
+ * @percent: Brightness in 0-100. Only meaningful in PWM mode.
+ * @reserved10to15: Should be 0.
+ */
+struct wilco_keyboard_leds_msg {
+ u8 command;
+ u8 status;
+ u8 subcmd;
+ u8 reserved3;
+ u8 mode;
+ u8 reserved5to8[4];
+ u8 percent;
+ u8 reserved10to15[6];
+} __packed;
+
+/* Send a request, get a response, and check that the response is good. */
+static int send_kbbl_msg(struct wilco_ec_device *ec,
+ struct wilco_keyboard_leds_msg *request,
+ struct wilco_keyboard_leds_msg *response)
+{
+ struct wilco_ec_message msg;
+ int ret;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.type = WILCO_EC_MSG_LEGACY;
+ msg.request_data = request;
+ msg.request_size = sizeof(*request);
+ msg.response_data = response;
+ msg.response_size = sizeof(*response);
+
+ ret = wilco_ec_mailbox(ec, &msg);
+ if (ret < 0) {
+ dev_err(ec->dev,
+ "Failed sending keyboard LEDs command: %d", ret);
+ return ret;
+ }
+
+ if (response->status) {
+ dev_err(ec->dev,
+ "EC reported failure sending keyboard LEDs command: %d",
+ response->status);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int set_kbbl(struct wilco_ec_device *ec, enum led_brightness brightness)
+{
+ struct wilco_keyboard_leds_msg request;
+ struct wilco_keyboard_leds_msg response;
+
+ memset(&request, 0, sizeof(request));
+ request.command = WILCO_EC_COMMAND_KBBL;
+ request.subcmd = WILCO_KBBL_SUBCMD_SET_STATE;
+ request.mode = WILCO_KBBL_MODE_FLAG_PWM;
+ request.percent = brightness;
+
+ return send_kbbl_msg(ec, &request, &response);
+}
+
+static int kbbl_exist(struct wilco_ec_device *ec, bool *exists)
+{
+ struct wilco_keyboard_leds_msg request;
+ struct wilco_keyboard_leds_msg response;
+ int ret;
+
+ memset(&request, 0, sizeof(request));
+ request.command = WILCO_EC_COMMAND_KBBL;
+ request.subcmd = WILCO_KBBL_SUBCMD_GET_FEATURES;
+
+ ret = send_kbbl_msg(ec, &request, &response);
+ if (ret < 0)
+ return ret;
+
+ *exists = response.status != 0xFF;
+
+ return 0;
+}
+
+/**
+ * kbbl_init() - Initialize the state of the keyboard backlight.
+ * @ec: EC device to talk to.
+ *
+ * Gets the current brightness, ensuring that the BIOS already initialized the
+ * backlight to PWM mode. If not in PWM mode, then the current brightness is
+ * meaningless, so set the brightness to WILCO_KBBL_DEFAULT_BRIGHTNESS.
+ *
+ * Return: Final brightness of the keyboard, or negative error code on failure.
+ */
+static int kbbl_init(struct wilco_ec_device *ec)
+{
+ struct wilco_keyboard_leds_msg request;
+ struct wilco_keyboard_leds_msg response;
+ int ret;
+
+ memset(&request, 0, sizeof(request));
+ request.command = WILCO_EC_COMMAND_KBBL;
+ request.subcmd = WILCO_KBBL_SUBCMD_GET_STATE;
+
+ ret = send_kbbl_msg(ec, &request, &response);
+ if (ret < 0)
+ return ret;
+
+ if (response.mode & WILCO_KBBL_MODE_FLAG_PWM)
+ return response.percent;
+
+ ret = set_kbbl(ec, WILCO_KBBL_DEFAULT_BRIGHTNESS);
+ if (ret < 0)
+ return ret;
+
+ return WILCO_KBBL_DEFAULT_BRIGHTNESS;
+}
+
+static int wilco_keyboard_leds_set(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct wilco_keyboard_leds *wkl =
+ container_of(cdev, struct wilco_keyboard_leds, keyboard);
+ return set_kbbl(wkl->ec, brightness);
+}
+
+int wilco_keyboard_leds_init(struct wilco_ec_device *ec)
+{
+ struct wilco_keyboard_leds *wkl;
+ bool leds_exist;
+ int ret;
+
+ ret = kbbl_exist(ec, &leds_exist);
+ if (ret < 0) {
+ dev_err(ec->dev,
+ "Failed checking keyboard LEDs support: %d", ret);
+ return ret;
+ }
+ if (!leds_exist)
+ return 0;
+
+ wkl = devm_kzalloc(ec->dev, sizeof(*wkl), GFP_KERNEL);
+ if (!wkl)
+ return -ENOMEM;
+
+ wkl->ec = ec;
+ wkl->keyboard.name = "platform::kbd_backlight";
+ wkl->keyboard.max_brightness = 100;
+ wkl->keyboard.flags = LED_CORE_SUSPENDRESUME;
+ wkl->keyboard.brightness_set_blocking = wilco_keyboard_leds_set;
+ ret = kbbl_init(ec);
+ if (ret < 0)
+ return ret;
+ wkl->keyboard.brightness = ret;
+
+ return devm_led_classdev_register(ec->dev, &wkl->keyboard);
+}
diff --git a/drivers/platform/chrome/wilco_ec/sysfs.c b/drivers/platform/chrome/wilco_ec/sysfs.c
index 3b86a21005d3..f0d174b6bb21 100644
--- a/drivers/platform/chrome/wilco_ec/sysfs.c
+++ b/drivers/platform/chrome/wilco_ec/sysfs.c
@@ -23,6 +23,26 @@ struct boot_on_ac_request {
u8 reserved7;
} __packed;
+#define CMD_USB_CHARGE 0x39
+
+enum usb_charge_op {
+ USB_CHARGE_GET = 0,
+ USB_CHARGE_SET = 1,
+};
+
+struct usb_charge_request {
+ u8 cmd; /* Always CMD_USB_CHARGE */
+ u8 reserved;
+ u8 op; /* One of enum usb_charge_op */
+ u8 val; /* When setting, either 0 or 1 */
+} __packed;
+
+struct usb_charge_response {
+ u8 reserved;
+ u8 status; /* Set by EC to 0 on success, other value on failure */
+ u8 val; /* When getting, set by EC to either 0 or 1 */
+} __packed;
+
#define CMD_EC_INFO 0x38
enum get_ec_info_op {
CMD_GET_EC_LABEL = 0,
@@ -131,12 +151,83 @@ static ssize_t model_number_show(struct device *dev,
static DEVICE_ATTR_RO(model_number);
+static int send_usb_charge(struct wilco_ec_device *ec,
+ struct usb_charge_request *rq,
+ struct usb_charge_response *rs)
+{
+ struct wilco_ec_message msg;
+ int ret;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.type = WILCO_EC_MSG_LEGACY;
+ msg.request_data = rq;
+ msg.request_size = sizeof(*rq);
+ msg.response_data = rs;
+ msg.response_size = sizeof(*rs);
+ ret = wilco_ec_mailbox(ec, &msg);
+ if (ret < 0)
+ return ret;
+ if (rs->status)
+ return -EIO;
+
+ return 0;
+}
+
+static ssize_t usb_charge_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct wilco_ec_device *ec = dev_get_drvdata(dev);
+ struct usb_charge_request rq;
+ struct usb_charge_response rs;
+ int ret;
+
+ memset(&rq, 0, sizeof(rq));
+ rq.cmd = CMD_USB_CHARGE;
+ rq.op = USB_CHARGE_GET;
+
+ ret = send_usb_charge(ec, &rq, &rs);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n", rs.val);
+}
+
+static ssize_t usb_charge_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct wilco_ec_device *ec = dev_get_drvdata(dev);
+ struct usb_charge_request rq;
+ struct usb_charge_response rs;
+ int ret;
+ u8 val;
+
+ ret = kstrtou8(buf, 10, &val);
+ if (ret < 0)
+ return ret;
+ if (val > 1)
+ return -EINVAL;
+
+ memset(&rq, 0, sizeof(rq));
+ rq.cmd = CMD_USB_CHARGE;
+ rq.op = USB_CHARGE_SET;
+ rq.val = val;
+
+ ret = send_usb_charge(ec, &rq, &rs);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(usb_charge);
static struct attribute *wilco_dev_attrs[] = {
&dev_attr_boot_on_ac.attr,
&dev_attr_build_date.attr,
&dev_attr_build_revision.attr,
&dev_attr_model_number.attr,
+ &dev_attr_usb_charge.attr,
&dev_attr_version.attr,
NULL,
};
diff --git a/drivers/platform/chrome/wilco_ec/telemetry.c b/drivers/platform/chrome/wilco_ec/telemetry.c
index b9d03c33d8dc..1176d543191a 100644
--- a/drivers/platform/chrome/wilco_ec/telemetry.c
+++ b/drivers/platform/chrome/wilco_ec/telemetry.c
@@ -406,8 +406,8 @@ static int telem_device_remove(struct platform_device *pdev)
struct telem_device_data *dev_data = platform_get_drvdata(pdev);
cdev_device_del(&dev_data->cdev, &dev_data->dev);
- put_device(&dev_data->dev);
ida_simple_remove(&telem_ida, MINOR(dev_data->dev.devt));
+ put_device(&dev_data->dev);
return 0;
}
diff --git a/include/linux/platform_data/cros_ec_proto.h b/include/linux/platform_data/cros_ec_proto.h
index eab7036cda09..30098a551523 100644
--- a/include/linux/platform_data/cros_ec_proto.h
+++ b/include/linux/platform_data/cros_ec_proto.h
@@ -12,6 +12,7 @@
#include <linux/mutex.h>
#include <linux/notifier.h>
+#include <linux/mfd/cros_ec.h>
#include <linux/platform_data/cros_ec_commands.h>
#define CROS_EC_DEV_NAME "cros_ec"
@@ -115,12 +116,16 @@ struct cros_ec_command {
* code.
* @pkt_xfer: Send packet to EC and get response.
* @lock: One transaction at a time.
- * @mkbp_event_supported: True if this EC supports the MKBP event protocol.
+ * @mkbp_event_supported: 0 if MKBP not supported. Otherwise its value is
+ * the maximum supported version of the MKBP host event
+ * command + 1.
* @host_sleep_v1: True if this EC supports the sleep v1 command.
* @event_notifier: Interrupt event notifier for transport devices.
* @event_data: Raw payload transferred with the MKBP event.
* @event_size: Size in bytes of the event data.
* @host_event_wake_mask: Mask of host events that cause wake from suspend.
+ * @last_event_time: exact time from the hard irq when we got notified of
+ * a new event.
* @ec: The platform_device used by the mfd driver to interface with the
* main EC.
* @pd: The platform_device used by the mfd driver to interface with the
@@ -153,7 +158,7 @@ struct cros_ec_device {
int (*pkt_xfer)(struct cros_ec_device *ec,
struct cros_ec_command *msg);
struct mutex lock;
- bool mkbp_event_supported;
+ u8 mkbp_event_supported;
bool host_sleep_v1;
struct blocking_notifier_head event_notifier;
@@ -161,6 +166,7 @@ struct cros_ec_device {
int event_size;
u32 host_event_wake_mask;
u32 last_resume_result;
+ ktime_t last_event_time;
/* The platform devices used by the mfd driver */
struct platform_device *ec;
@@ -168,14 +174,6 @@ struct cros_ec_device {
};
/**
- * struct cros_ec_sensor_platform - ChromeOS EC sensor platform information.
- * @sensor_num: Id of the sensor, as reported by the EC.
- */
-struct cros_ec_sensor_platform {
- u8 sensor_num;
-};
-
-/**
* struct cros_ec_platform - ChromeOS EC platform information.
* @ec_name: Name of EC device (e.g. 'cros-ec', 'cros-pd', ...)
* used in /dev/ and sysfs.
@@ -187,133 +185,51 @@ struct cros_ec_platform {
u16 cmd_offset;
};
-/**
- * cros_ec_suspend() - Handle a suspend operation for the ChromeOS EC device.
- * @ec_dev: Device to suspend.
- *
- * This can be called by drivers to handle a suspend event.
- *
- * Return: 0 on success or negative error code.
- */
int cros_ec_suspend(struct cros_ec_device *ec_dev);
-/**
- * cros_ec_resume() - Handle a resume operation for the ChromeOS EC device.
- * @ec_dev: Device to resume.
- *
- * This can be called by drivers to handle a resume event.
- *
- * Return: 0 on success or negative error code.
- */
int cros_ec_resume(struct cros_ec_device *ec_dev);
-/**
- * cros_ec_prepare_tx() - Prepare an outgoing message in the output buffer.
- * @ec_dev: Device to register.
- * @msg: Message to write.
- *
- * This is intended to be used by all ChromeOS EC drivers, but at present
- * only SPI uses it. Once LPC uses the same protocol it can start using it.
- * I2C could use it now, with a refactor of the existing code.
- *
- * Return: 0 on success or negative error code.
- */
int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
struct cros_ec_command *msg);
-/**
- * cros_ec_check_result() - Check ec_msg->result.
- * @ec_dev: EC device.
- * @msg: Message to check.
- *
- * This is used by ChromeOS EC drivers to check the ec_msg->result for
- * errors and to warn about them.
- *
- * Return: 0 on success or negative error code.
- */
int cros_ec_check_result(struct cros_ec_device *ec_dev,
struct cros_ec_command *msg);
-/**
- * cros_ec_cmd_xfer() - Send a command to the ChromeOS EC.
- * @ec_dev: EC device.
- * @msg: Message to write.
- *
- * Call this to send a command to the ChromeOS EC. This should be used
- * instead of calling the EC's cmd_xfer() callback directly.
- *
- * Return: 0 on success or negative error code.
- */
int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
struct cros_ec_command *msg);
-/**
- * cros_ec_cmd_xfer_status() - Send a command to the ChromeOS EC.
- * @ec_dev: EC device.
- * @msg: Message to write.
- *
- * This function is identical to cros_ec_cmd_xfer, except it returns success
- * status only if both the command was transmitted successfully and the EC
- * replied with success status. It's not necessary to check msg->result when
- * using this function.
- *
- * Return: The number of bytes transferred on success or negative error code.
- */
int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
struct cros_ec_command *msg);
-/**
- * cros_ec_register() - Register a new ChromeOS EC, using the provided info.
- * @ec_dev: Device to register.
- *
- * Before calling this, allocate a pointer to a new device and then fill
- * in all the fields up to the --private-- marker.
- *
- * Return: 0 on success or negative error code.
- */
int cros_ec_register(struct cros_ec_device *ec_dev);
-/**
- * cros_ec_unregister() - Remove a ChromeOS EC.
- * @ec_dev: Device to unregister.
- *
- * Call this to deregister a ChromeOS EC, then clean up any private data.
- *
- * Return: 0 on success or negative error code.
- */
int cros_ec_unregister(struct cros_ec_device *ec_dev);
-/**
- * cros_ec_query_all() - Query the protocol version supported by the
- * ChromeOS EC.
- * @ec_dev: Device to register.
- *
- * Return: 0 on success or negative error code.
- */
int cros_ec_query_all(struct cros_ec_device *ec_dev);
-/**
- * cros_ec_get_next_event() - Fetch next event from the ChromeOS EC.
- * @ec_dev: Device to fetch event from.
- * @wake_event: Pointer to a bool set to true upon return if the event might be
- * treated as a wake event. Ignored if null.
- *
- * Return: negative error code on errors; 0 for no data; or else number of
- * bytes received (i.e., an event was retrieved successfully). Event types are
- * written out to @ec_dev->event_data.event_type on success.
- */
-int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event);
+int cros_ec_get_next_event(struct cros_ec_device *ec_dev,
+ bool *wake_event,
+ bool *has_more_events);
+
+u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev);
+
+int cros_ec_check_features(struct cros_ec_dev *ec, int feature);
+
+int cros_ec_get_sensor_count(struct cros_ec_dev *ec);
+
+bool cros_ec_handle_event(struct cros_ec_device *ec_dev);
/**
- * cros_ec_get_host_event() - Return a mask of event set by the ChromeOS EC.
- * @ec_dev: Device to fetch event from.
+ * cros_ec_get_time_ns() - Return time in ns.
*
- * When MKBP is supported, when the EC raises an interrupt, we collect the
- * events raised and call the functions in the ec notifier. This function
- * is a helper to know which events are raised.
+ * This is the function used to record the time for last_event_time in struct
+ * cros_ec_device during the hard irq.
*
- * Return: 0 on error or non-zero bitmask of one or more EC_HOST_EVENT_*.
+ * Return: ktime_t format since boot.
*/
-u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev);
+static inline ktime_t cros_ec_get_time_ns(void)
+{
+ return ktime_get_boottime_ns();
+}
#endif /* __LINUX_CROS_EC_PROTO_H */
diff --git a/include/linux/platform_data/cros_ec_sensorhub.h b/include/linux/platform_data/cros_ec_sensorhub.h
new file mode 100644
index 000000000000..bef7ffc7fce1
--- /dev/null
+++ b/include/linux/platform_data/cros_ec_sensorhub.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Chrome OS EC MEMS Sensor Hub driver.
+ *
+ * Copyright 2019 Google LLC
+ */
+
+#ifndef __LINUX_PLATFORM_DATA_CROS_EC_SENSORHUB_H
+#define __LINUX_PLATFORM_DATA_CROS_EC_SENSORHUB_H
+
+#include <linux/platform_data/cros_ec_commands.h>
+
+/**
+ * struct cros_ec_sensor_platform - ChromeOS EC sensor platform information.
+ * @sensor_num: Id of the sensor, as reported by the EC.
+ */
+struct cros_ec_sensor_platform {
+ u8 sensor_num;
+};
+
+/**
+ * struct cros_ec_sensorhub - Sensor Hub device data.
+ *
+ * @ec: Embedded Controller where the hub is located.
+ */
+struct cros_ec_sensorhub {
+ struct cros_ec_dev *ec;
+};
+
+#endif /* __LINUX_PLATFORM_DATA_CROS_EC_SENSORHUB_H */
diff --git a/include/linux/platform_data/wilco-ec.h b/include/linux/platform_data/wilco-ec.h
index ad03b586a095..afede15a95bf 100644
--- a/include/linux/platform_data/wilco-ec.h
+++ b/include/linux/platform_data/wilco-ec.h
@@ -29,6 +29,7 @@
* @data_size: Size of the data buffer used for EC communication.
* @debugfs_pdev: The child platform_device used by the debugfs sub-driver.
* @rtc_pdev: The child platform_device used by the RTC sub-driver.
+ * @charger_pdev: Child platform_device used by the charger config sub-driver.
* @telem_pdev: The child platform_device used by the telemetry sub-driver.
*/
struct wilco_ec_device {
@@ -41,6 +42,7 @@ struct wilco_ec_device {
size_t data_size;
struct platform_device *debugfs_pdev;
struct platform_device *rtc_pdev;
+ struct platform_device *charger_pdev;
struct platform_device *telem_pdev;
};
@@ -120,6 +122,19 @@ struct wilco_ec_message {
*/
int wilco_ec_mailbox(struct wilco_ec_device *ec, struct wilco_ec_message *msg);
+/**
+ * wilco_keyboard_leds_init() - Set up the keyboard backlight LEDs.
+ * @ec: EC device to query.
+ *
+ * After this call, the keyboard backlight will be exposed through a an LED
+ * device at /sys/class/leds.
+ *
+ * This may sleep because it uses wilco_ec_mailbox().
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+int wilco_keyboard_leds_init(struct wilco_ec_device *ec);
+
/*
* A Property is typically a data item that is stored to NVRAM
* by the EC. Each of these data items has an index associated