diff options
| -rw-r--r-- | arch/powerpc/kernel/Makefile | 6 | ||||
| -rw-r--r-- | arch/powerpc/kernel/entry_32.S | 8 | ||||
| -rw-r--r-- | arch/powerpc/kernel/idle.c (renamed from arch/powerpc/kernel/idle_64.c) | 79 | ||||
| -rw-r--r-- | arch/powerpc/kernel/idle_6xx.S | 15 | ||||
| -rw-r--r-- | arch/powerpc/kernel/idle_power4.S | 15 | ||||
| -rw-r--r-- | arch/powerpc/kernel/setup_32.c | 7 | ||||
| -rw-r--r-- | arch/powerpc/kernel/setup_64.c | 6 | ||||
| -rw-r--r-- | arch/powerpc/platforms/maple/setup.c | 2 | ||||
| -rw-r--r-- | arch/powerpc/platforms/powermac/setup.c | 2 | ||||
| -rw-r--r-- | arch/ppc/Makefile | 2 | ||||
| -rw-r--r-- | arch/ppc/kernel/Makefile | 4 | ||||
| -rw-r--r-- | arch/ppc/kernel/entry.S | 8 | ||||
| -rw-r--r-- | arch/ppc/kernel/idle.c | 112 | ||||
| -rw-r--r-- | arch/ppc/kernel/idle_6xx.S | 233 | ||||
| -rw-r--r-- | arch/ppc/kernel/idle_power4.S | 91 | ||||
| -rw-r--r-- | include/asm-powerpc/machdep.h | 13 | ||||
| -rw-r--r-- | include/asm-powerpc/reg.h | 4 | ||||
| -rw-r--r-- | include/asm-ppc/machdep.h | 2 |
18 files changed, 74 insertions, 535 deletions
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 80e9fe2632b8..f2c47e907037 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -12,12 +12,12 @@ endif obj-y := semaphore.o cputable.o ptrace.o syscalls.o \ irq.o align.o signal_32.o pmc.o vdso.o \ - init_task.o process.o systbl.o + init_task.o process.o systbl.o idle.o obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ signal_64.o ptrace32.o \ paca.o cpu_setup_power4.o \ - firmware.o sysfs.o idle_64.o + firmware.o sysfs.o obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o obj-$(CONFIG_POWER4) += idle_power4.o @@ -34,6 +34,7 @@ obj-$(CONFIG_IBMEBUS) += ibmebus.o obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o +obj-$(CONFIG_6xx) += idle_6xx.o ifeq ($(CONFIG_PPC_MERGE),y) @@ -51,7 +52,6 @@ obj-$(CONFIG_PPC64) += misc_64.o dma_64.o iommu.o obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o obj-$(CONFIG_MODULES) += ppc_ksyms.o obj-$(CONFIG_BOOTX_TEXT) += btext.o -obj-$(CONFIG_6xx) += idle_6xx.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_PPC_UDBG_16550) += legacy_serial.o udbg_16550.o diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 4827ca1ec89b..b3a979467225 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -135,10 +135,10 @@ transfer_to_handler: mfspr r11,SPRN_HID0 mtcr r11 BEGIN_FTR_SECTION - bt- 8,power_save_6xx_restore /* Check DOZE */ + bt- 8,4f /* Check DOZE */ END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) BEGIN_FTR_SECTION - bt- 9,power_save_6xx_restore /* Check NAP */ + bt- 9,4f /* Check NAP */ END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) #endif /* CONFIG_6xx */ .globl transfer_to_handler_cont @@ -157,6 +157,10 @@ transfer_to_handler_cont: SYNC RFI /* jump to handler, enable MMU */ +#ifdef CONFIG_6xx +4: b power_save_6xx_restore +#endif + /* * On kernel stack overflow, load up an initial stack pointer * and call StackOverflow(regs), which should not return. diff --git a/arch/powerpc/kernel/idle_64.c b/arch/powerpc/kernel/idle.c index b879d3057ef8..e9f321d74d85 100644 --- a/arch/powerpc/kernel/idle_64.c +++ b/arch/powerpc/kernel/idle.c @@ -2,13 +2,17 @@ * Idle daemon for PowerPC. Idle daemon will handle any action * that needs to be taken when the system becomes idle. * - * Originally Written by Cort Dougan (cort@cs.nmt.edu) + * Originally written by Cort Dougan (cort@cs.nmt.edu). + * Subsequent 32-bit hacking by Tom Rini, Armin Kuster, + * Paul Mackerras and others. * * iSeries supported added by Mike Corrigan <mikejc@us.ibm.com> * * Additional shared processor, SMT, and firmware support * Copyright (c) 2003 Dave Engebretsen <engebret@us.ibm.com> * + * 32-bit and 64-bit versions merged by Paul Mackerras <paulus@samba.org> + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version @@ -29,18 +33,43 @@ #include <asm/machdep.h> #include <asm/smp.h> -extern void power4_idle(void); +#ifdef CONFIG_HOTPLUG_CPU +#define cpu_should_die() (cpu_is_offline(smp_processor_id()) && \ + system_state == SYSTEM_RUNNING) +#else +#define cpu_should_die() 0 +#endif -void default_idle(void) +/* + * The body of the idle task. + */ +void cpu_idle(void) { - unsigned int cpu = smp_processor_id(); - set_thread_flag(TIF_POLLING_NRFLAG); + if (ppc_md.idle_loop) + ppc_md.idle_loop(); /* doesn't return */ + set_thread_flag(TIF_POLLING_NRFLAG); while (1) { - if (!need_resched()) { - while (!need_resched() && !cpu_is_offline(cpu)) { - ppc64_runlatch_off(); + ppc64_runlatch_off(); + while (!need_resched() && !cpu_should_die()) { + if (ppc_md.power_save) { + clear_thread_flag(TIF_POLLING_NRFLAG); + /* + * smp_mb is so clearing of TIF_POLLING_NRFLAG + * is ordered w.r.t. need_resched() test. + */ + smp_mb(); + local_irq_disable(); + + /* check again after disabling irqs */ + if (!need_resched() && !cpu_should_die()) + ppc_md.power_save(); + + local_irq_enable(); + set_thread_flag(TIF_POLLING_NRFLAG); + + } else { /* * Go into low thread priority and possibly * low power mode. @@ -48,46 +77,18 @@ void default_idle(void) HMT_low(); HMT_very_low(); } - - HMT_medium(); } + HMT_medium(); ppc64_runlatch_on(); + if (cpu_should_die()) + cpu_die(); preempt_enable_no_resched(); schedule(); preempt_disable(); - if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) - cpu_die(); } } -void native_idle(void) -{ - while (1) { - ppc64_runlatch_off(); - - if (!need_resched()) - power4_idle(); - - if (need_resched()) { - ppc64_runlatch_on(); - preempt_enable_no_resched(); - schedule(); - preempt_disable(); - } - - if (cpu_is_offline(smp_processor_id()) && - system_state == SYSTEM_RUNNING) - cpu_die(); - } -} - -void cpu_idle(void) -{ - BUG_ON(NULL == ppc_md.idle_loop); - ppc_md.idle_loop(); -} - int powersave_nap; #ifdef CONFIG_SYSCTL diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S index 444fdcc769f1..1647ea361ef7 100644 --- a/arch/powerpc/kernel/idle_6xx.S +++ b/arch/powerpc/kernel/idle_6xx.S @@ -87,19 +87,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) cmpwi 0,r3,0 beqlr - /* Clear MSR:EE */ - mfmsr r7 - rlwinm r0,r7,0,17,15 - mtmsr r0 - - /* Check current_thread_info()->flags */ - rlwinm r4,r1,0,0,18 - lwz r4,TI_FLAGS(r4) - andi. r0,r4,_TIF_NEED_RESCHED - beq 1f - mtmsr r7 /* out of line this ? */ - blr -1: /* Some pre-nap cleanups needed on some CPUs */ andis. r0,r3,HID0_NAP@h beq 2f @@ -220,8 +207,6 @@ _GLOBAL(nap_save_msscr0) _GLOBAL(nap_save_hid1) .space 4*NR_CPUS -_GLOBAL(powersave_nap) - .long 0 _GLOBAL(powersave_lowspeed) .long 0 diff --git a/arch/powerpc/kernel/idle_power4.S b/arch/powerpc/kernel/idle_power4.S index c16b4afab582..692cf2ebe0f4 100644 --- a/arch/powerpc/kernel/idle_power4.S +++ b/arch/powerpc/kernel/idle_power4.S @@ -49,21 +49,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP) cmpwi 0,r4,0 beqlr - /* Clear MSR:EE */ - mfmsr r7 - li r4,0 - ori r4,r4,MSR_EE - andc r0,r7,r4 - mtmsrd r0 - - /* Check current_thread_info()->flags */ - clrrdi r4,r1,THREAD_SHIFT - ld r4,TI_FLAGS(r4) - andi. r0,r4,_TIF_NEED_RESCHED - beq 1f - mtmsrd r7 /* out of line this ? */ - blr -1: /* Go to NAP now */ BEGIN_FTR_SECTION DSSALL diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 676f894c3380..e39f830317a8 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -53,9 +53,6 @@ extern void platform_init(void); extern void bootx_init(unsigned long r4, unsigned long phys); -extern void ppc6xx_idle(void); -extern void power4_idle(void); - boot_infos_t *boot_infos; struct ide_machdep_calls ppc_ide_md; @@ -194,7 +191,9 @@ void __init machine_init(unsigned long dt_ptr, unsigned long phys) platform_init(); #ifdef CONFIG_6xx - ppc_md.power_save = ppc6xx_idle; + if (cpu_has_feature(CPU_FTR_CAN_DOZE) || + cpu_has_feature(CPU_FTR_CAN_NAP)) + ppc_md.power_save = ppc6xx_idle; #endif if (ppc_md.progress) diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 6c9b093c23a5..5b63a861ef43 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -607,12 +607,6 @@ void __init setup_arch(char **cmdline_p) ppc_md.setup_arch(); - /* Use the default idle loop if the platform hasn't provided one. */ - if (NULL == ppc_md.idle_loop) { - ppc_md.idle_loop = default_idle; - printk(KERN_INFO "Using default idle loop\n"); - } - paging_init(); ppc64_boot_msg(0x15, "Setup Done"); } diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index ec5c1e10c407..137d6063182b 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -290,7 +290,7 @@ struct machdep_calls __initdata maple_md = { .get_rtc_time = maple_get_rtc_time, .calibrate_decr = generic_calibrate_decr, .progress = maple_progress, - .idle_loop = native_idle, + .power_save = power4_idle, #ifdef CONFIG_KEXEC .machine_kexec = default_machine_kexec, .machine_kexec_prepare = default_machine_kexec_prepare, diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 385aab90c4d2..c2696d00672a 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -733,7 +733,7 @@ struct machdep_calls __initdata pmac_md = { .progress = udbg_progress, #ifdef CONFIG_PPC64 .pci_probe_mode = pmac_pci_probe_mode, - .idle_loop = native_idle, + .power_save = power4_idle, .enable_pmcs = power4_enable_pmcs, #ifdef CONFIG_KEXEC .machine_kexec = default_machine_kexec, diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile index 9fbdf54ba2be..cde5fa87f455 100644 --- a/arch/ppc/Makefile +++ b/arch/ppc/Makefile @@ -59,8 +59,6 @@ head-$(CONFIG_4xx) := arch/ppc/kernel/head_4xx.o head-$(CONFIG_44x) := arch/ppc/kernel/head_44x.o head-$(CONFIG_FSL_BOOKE) := arch/ppc/kernel/head_fsl_booke.o -head-$(CONFIG_6xx) += arch/ppc/kernel/idle_6xx.o -head-$(CONFIG_POWER4) += arch/ppc/kernel/idle_power4.o head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o core-y += arch/ppc/kernel/ arch/powerpc/kernel/ \ diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index e399bbb969a4..1b2c7458a3d0 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -8,10 +8,9 @@ extra-$(CONFIG_40x) := head_4xx.o extra-$(CONFIG_44x) := head_44x.o extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o extra-$(CONFIG_8xx) := head_8xx.o -extra-$(CONFIG_6xx) += idle_6xx.o extra-y += vmlinux.lds -obj-y := entry.o traps.o idle.o time.o misc.o \ +obj-y := entry.o traps.o time.o misc.o \ setup.o \ ppc_htab.o obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o @@ -35,7 +34,6 @@ endif # These are here while we do the architecture merge else -obj-y := idle.o obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o obj-$(CONFIG_MODULES) += module.o diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S index 3a2815978488..fa8d49789ef1 100644 --- a/arch/ppc/kernel/entry.S +++ b/arch/ppc/kernel/entry.S @@ -135,10 +135,10 @@ transfer_to_handler: mfspr r11,SPRN_HID0 mtcr r11 BEGIN_FTR_SECTION - bt- 8,power_save_6xx_restore /* Check DOZE */ + bt- 8,4f /* Check DOZE */ END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) BEGIN_FTR_SECTION - bt- 9,power_save_6xx_restore /* Check NAP */ + bt- 9,4f /* Check NAP */ END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) #endif /* CONFIG_6xx */ .globl transfer_to_handler_cont @@ -157,6 +157,10 @@ transfer_to_handler_cont: SYNC RFI /* jump to handler, enable MMU */ +#ifdef CONFIG_6xx +4: b power_save_6xx_restore +#endif + /* * On kernel stack overflow, load up an initial stack pointer * and call StackOverflow(regs), which should not return. diff --git a/arch/ppc/kernel/idle.c b/arch/ppc/kernel/idle.c deleted file mode 100644 index 1be3ca5bae40..000000000000 --- a/arch/ppc/kernel/idle.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * Idle daemon for PowerPC. Idle daemon will handle any action - * that needs to be taken when the system becomes idle. - * - * Written by Cort Dougan (cort@cs.nmt.edu). Subsequently hacked - * on by Tom Rini, Armin Kuster, Paul Mackerras and others. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/config.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/smp.h> -#include <linux/smp_lock.h> -#include <linux/stddef.h> -#include <linux/unistd.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/sysctl.h> -#include <linux/cpu.h> - -#include <asm/pgtable.h> -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/mmu.h> -#include <asm/cache.h> -#include <asm/cputable.h> -#include <asm/machdep.h> -#include <asm/smp.h> - -void default_idle(void) -{ - void (*powersave)(void); - - powersave = ppc_md.power_save; - - if (!need_resched()) { - if (powersave != NULL) - powersave(); -#ifdef CONFIG_SMP - else { - set_thread_flag(TIF_POLLING_NRFLAG); - while (!need_resched() && - !cpu_is_offline(smp_processor_id())) - barrier(); - clear_thread_flag(TIF_POLLING_NRFLAG); - } -#endif - } -} - -/* - * The body of the idle task. - */ -void cpu_idle(void) -{ - int cpu = smp_processor_id(); - - for (;;) { - while (!need_resched()) { - if (ppc_md.idle != NULL) - ppc_md.idle(); - else - default_idle(); - } - - if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) - cpu_die(); - preempt_enable_no_resched(); - schedule(); - preempt_disable(); - } -} - -#if defined(CONFIG_SYSCTL) && defined(CONFIG_6xx) -/* - * Register the sysctl to set/clear powersave_nap. - */ -extern int powersave_nap; - -static ctl_table powersave_nap_ctl_table[]={ - { - .ctl_name = KERN_PPC_POWERSAVE_NAP, - .procname = "powersave-nap", - .data = &powersave_nap, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = &proc_dointvec, - }, - { 0, }, -}; -static ctl_table powersave_nap_sysctl_root[] = { - { 1, "kernel", NULL, 0, 0755, powersave_nap_ctl_table, }, - { 0,}, -}; - -static int __init -register_powersave_nap_sysctl(void) -{ - register_sysctl_table(powersave_nap_sysctl_root, 0); - - return 0; -} - -__initcall(register_powersave_nap_sysctl); -#endif diff --git a/arch/ppc/kernel/idle_6xx.S b/arch/ppc/kernel/idle_6xx.S deleted file mode 100644 index 1a2194cf6828..000000000000 --- a/arch/ppc/kernel/idle_6xx.S +++ /dev/null @@ -1,233 +0,0 @@ -/* - * This file contains the power_save function for 6xx & 7xxx CPUs - * rewritten in assembler - * - * Warning ! This code assumes that if your machine has a 750fx - * it will have PLL 1 set to low speed mode (used during NAP/DOZE). - * if this is not the case some additional changes will have to - * be done to check a runtime var (a bit like powersave-nap) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/config.h> -#include <linux/threads.h> -#include <asm/processor.h> -#include <asm/page.h> -#include <asm/cputable.h> -#include <asm/thread_info.h> -#include <asm/ppc_asm.h> -#include <asm/asm-offsets.h> - -#undef DEBUG - - .text - -/* - * Init idle, called at early CPU setup time from head.S for each CPU - * Make sure no rest of NAP mode remains in HID0, save default - * values for some CPU specific registers. Called with r24 - * containing CPU number and r3 reloc offset - */ -_GLOBAL(init_idle_6xx) -BEGIN_FTR_SECTION - mfspr r4,SPRN_HID0 - rlwinm r4,r4,0,10,8 /* Clear NAP */ - mtspr SPRN_HID0, r4 - b 1f -END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) - blr -1: - slwi r5,r24,2 - add r5,r5,r3 -BEGIN_FTR_SECTION - mfspr r4,SPRN_MSSCR0 - addis r6,r5, nap_save_msscr0@ha - stw r4,nap_save_msscr0@l(r6) -END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR) -BEGIN_FTR_SECTION - mfspr r4,SPRN_HID1 - addis r6,r5,nap_save_hid1@ha - stw r4,nap_save_hid1@l(r6) -END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX) - blr - -/* - * Here is the power_save_6xx function. This could eventually be - * split into several functions & changing the function pointer - * depending on the various features. - */ -_GLOBAL(ppc6xx_idle) - /* Check if we can nap or doze, put HID0 mask in r3 - */ - lis r3, 0 -BEGIN_FTR_SECTION - lis r3,HID0_DOZE@h -END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) -BEGIN_FTR_SECTION - /* We must dynamically check for the NAP feature as it - * can be cleared by CPU init after the fixups are done - */ - lis r4,cur_cpu_spec@ha - lwz r4,cur_cpu_spec@l(r4) - lwz r4,CPU_SPEC_FEATURES(r4) - andi. r0,r4,CPU_FTR_CAN_NAP - beq 1f - /* Now check if user or arch enabled NAP mode */ - lis r4,powersave_nap@ha - lwz r4,powersave_nap@l(r4) - cmpwi 0,r4,0 - beq 1f - lis r3,HID0_NAP@h -1: -END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) - cmpwi 0,r3,0 - beqlr - - /* Clear MSR:EE */ - mfmsr r7 - rlwinm r0,r7,0,17,15 - mtmsr r0 - - /* Check current_thread_info()->flags */ - rlwinm r4,r1,0,0,18 - lwz r4,TI_FLAGS(r4) - andi. r0,r4,_TIF_NEED_RESCHED - beq 1f - mtmsr r7 /* out of line this ? */ - blr -1: - /* Some pre-nap cleanups needed on some CPUs */ - andis. r0,r3,HID0_NAP@h - beq 2f -BEGIN_FTR_SECTION - /* Disable L2 prefetch on some 745x and try to ensure - * L2 prefetch engines are idle. As explained by errata - * text, we can't be sure they are, we just hope very hard - * that well be enough (sic !). At least I noticed Apple - * doesn't even bother doing the dcbf's here... - */ - mfspr r4,SPRN_MSSCR0 - rlwinm r4,r4,0,0,29 - sync - mtspr SPRN_MSSCR0,r4 - sync - isync - lis r4,KERNELBASE@h - dcbf 0,r4 - dcbf 0,r4 - dcbf 0,r4 - dcbf 0,r4 -END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR) -#ifdef DEBUG - lis r6,nap_enter_count@ha - lwz r4,nap_enter_count@l(r6) - addi r4,r4,1 - stw r4,nap_enter_count@l(r6) -#endif -2: -BEGIN_FTR_SECTION - /* Go to low speed mode on some 750FX */ - lis r4,powersave_lowspeed@ha - lwz r4,powersave_lowspeed@l(r4) - cmpwi 0,r4,0 - beq 1f - mfspr r4,SPRN_HID1 - oris r4,r4,0x0001 - mtspr SPRN_HID1,r4 -1: -END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX) - - /* Go to NAP or DOZE now */ - mfspr r4,SPRN_HID0 - lis r5,(HID0_NAP|HID0_SLEEP)@h -BEGIN_FTR_SECTION - oris r5,r5,HID0_DOZE@h -END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) - andc r4,r4,r5 - or r4,r4,r3 -BEGIN_FTR_SECTION - oris r4,r4,HID0_DPM@h /* that should be done once for all */ -END_FTR_SECTION_IFCLR(CPU_FTR_NO_DPM) - mtspr SPRN_HID0,r4 -BEGIN_FTR_SECTION - DSSALL - sync -END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) - ori r7,r7,MSR_EE /* Could be ommited (already set) */ - oris r7,r7,MSR_POW@h - sync - isync - mtmsr r7 - isync - sync - blr - -/* - * Return from NAP/DOZE mode, restore some CPU specific registers, - * we are called with DR/IR still off and r2 containing physical - * address of current. - */ -_GLOBAL(power_save_6xx_restore) - mfspr r11,SPRN_HID0 - rlwinm. r11,r11,0,10,8 /* Clear NAP & copy NAP bit !state to cr1 EQ */ - cror 4*cr1+eq,4*cr0+eq,4*cr0+eq -BEGIN_FTR_SECTION - rlwinm r11,r11,0,9,7 /* Clear DOZE */ -END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE) - mtspr SPRN_HID0, r11 - -#ifdef DEBUG - beq cr1,1f - lis r11,(nap_return_count-KERNELBASE)@ha - lwz r9,nap_return_count@l(r11) - addi r9,r9,1 - stw r9,nap_return_count@l(r11) -1: -#endif - - rlwinm r9,r1,0,0,18 - tophys(r9,r9) - lwz r11,TI_CPU(r9) - slwi r11,r11,2 - /* Todo make sure all these are in the same page - * and load r22 (@ha part + CPU offset) only once - */ -BEGIN_FTR_SECTION - beq cr1,1f - addis r9,r11,(nap_save_msscr0-KERNELBASE)@ha - lwz r9,nap_save_msscr0@l(r9) - mtspr SPRN_MSSCR0, r9 - sync - isync -1: -END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR) -BEGIN_FTR_SECTION - addis r9,r11,(nap_save_hid1-KERNELBASE)@ha - lwz r9,nap_save_hid1@l(r9) - mtspr SPRN_HID1, r9 -END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX) - b transfer_to_handler_cont - - .data - -_GLOBAL(nap_save_msscr0) - .space 4*NR_CPUS - -_GLOBAL(nap_save_hid1) - .space 4*NR_CPUS - -_GLOBAL(powersave_nap) - .long 0 -_GLOBAL(powersave_lowspeed) - .long 0 - -#ifdef DEBUG -_GLOBAL(nap_enter_count) - .space 4 -_GLOBAL(nap_return_count) - .space 4 -#endif diff --git a/arch/ppc/kernel/idle_power4.S b/arch/ppc/kernel/idle_power4.S deleted file mode 100644 index cc0d535365cd..000000000000 --- a/arch/ppc/kernel/idle_power4.S +++ /dev/null @@ -1,91 +0,0 @@ -/* - * This file contains the power_save function for 6xx & 7xxx CPUs - * rewritten in assembler - * - * Warning ! This code assumes that if your machine has a 750fx - * it will have PLL 1 set to low speed mode (used during NAP/DOZE). - * if this is not the case some additional changes will have to - * be done to check a runtime var (a bit like powersave-nap) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/config.h> -#include <linux/threads.h> -#include <asm/processor.h> -#include <asm/page.h> -#include <asm/cputable.h> -#include <asm/thread_info.h> -#include <asm/ppc_asm.h> -#include <asm/asm-offsets.h> - -#undef DEBUG - - .text - -/* - * Init idle, called at early CPU setup time from head.S for each CPU - * So nothing for now. Called with r24 containing CPU number and r3 - * reloc offset - */ - .globl init_idle_power4 -init_idle_power4: - blr - -/* - * Here is the power_save_6xx function. This could eventually be - * split into several functions & changing the function pointer - * depending on the various features. - */ - .globl power4_idle -power4_idle: -BEGIN_FTR_SECTION - blr -END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP) - /* We must dynamically check for the NAP feature as it - * can be cleared by CPU init after the fixups are done - */ - lis r4,cur_cpu_spec@ha - lwz r4,cur_cpu_spec@l(r4) - lwz r4,CPU_SPEC_FEATURES(r4) - andi. r0,r4,CPU_FTR_CAN_NAP - beqlr - /* Now check if user or arch enabled NAP mode */ - lis r4,powersave_nap@ha - lwz r4,powersave_nap@l(r4) - cmpwi 0,r4,0 - beqlr - - /* Clear MSR:EE */ - mfmsr r7 - rlwinm r0,r7,0,17,15 - mtmsr r0 - - /* Check current_thread_info()->flags */ - rlwinm r4,r1,0,0,18 - lwz r4,TI_FLAGS(r4) - andi. r0,r4,_TIF_NEED_RESCHED - beq 1f - mtmsr r7 /* out of line this ? */ - blr -1: - /* Go to NAP now */ -BEGIN_FTR_SECTION - DSSALL - sync -END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) - ori r7,r7,MSR_EE /* Could be ommited (already set) */ - oris r7,r7,MSR_POW@h - sync - isync - mtmsr r7 - isync - sync - blr - - .globl powersave_nap -powersave_nap: - .long 0 diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h index 5348b820788c..21c8dc90d175 100644 --- a/include/asm-powerpc/machdep.h +++ b/include/asm-powerpc/machdep.h @@ -158,6 +158,12 @@ struct machdep_calls { /* Idle loop for this platform, leave empty for default idle loop */ void (*idle_loop)(void); + /* + * Function for waiting for work with reduced power in idle loop; + * called with interrupts disabled. + */ + void (*power_save)(void); + /* Function to enable performance monitor counters for this platform, called once per cpu. */ void (*enable_pmcs)(void); @@ -170,9 +176,6 @@ struct machdep_calls { May be NULL. */ void (*init)(void); - void (*idle)(void); - void (*power_save)(void); - void (*heartbeat)(void); unsigned long heartbeat_reset; unsigned long heartbeat_count; @@ -242,8 +245,8 @@ struct machdep_calls { #endif /* CONFIG_KEXEC */ }; -extern void default_idle(void); -extern void native_idle(void); +extern void power4_idle(void); +extern void ppc6xx_idle(void); extern struct machdep_calls ppc_md; extern char cmd_line[COMMAND_LINE_SIZE]; diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h index 72bfe3af0460..bd467bf5cf5a 100644 --- a/include/asm-powerpc/reg.h +++ b/include/asm-powerpc/reg.h @@ -622,6 +622,10 @@ extern void ppc64_runlatch_off(void); extern unsigned long scom970_read(unsigned int address); extern void scom970_write(unsigned int address, unsigned long value); +#else +#define ppc64_runlatch_on() +#define ppc64_runlatch_off() + #endif /* CONFIG_PPC64 */ #define __get_SP() ({unsigned long sp; \ diff --git a/include/asm-ppc/machdep.h b/include/asm-ppc/machdep.h index a3e8a45e45a9..ebbef64e8985 100644 --- a/include/asm-ppc/machdep.h +++ b/include/asm-ppc/machdep.h @@ -44,7 +44,7 @@ struct machdep_calls { void (*power_off)(void); void (*halt)(void); - void (*idle)(void); + void (*idle_loop)(void); void (*power_save)(void); long (*time_init)(void); /* Optional, may be NULL */ |