summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml40
-rw-r--r--Documentation/devicetree/bindings/pci/loongson.yaml62
-rw-r--r--arch/mips/Kbuild2
-rw-r--r--arch/mips/Kbuild.platforms76
-rw-r--r--arch/mips/Kconfig174
-rw-r--r--arch/mips/Kconfig.debug10
-rw-r--r--arch/mips/Makefile48
-rw-r--r--arch/mips/alchemy/Platform3
-rw-r--r--arch/mips/alchemy/common/setup.c17
-rw-r--r--arch/mips/alchemy/devboards/db1550.c2
-rw-r--r--arch/mips/ar7/Platform1
-rw-r--r--arch/mips/ar7/setup.c2
-rw-r--r--arch/mips/ath25/Platform1
-rw-r--r--arch/mips/ath79/Platform1
-rw-r--r--arch/mips/ath79/setup.c3
-rw-r--r--arch/mips/bcm47xx/Platform1
-rw-r--r--arch/mips/bcm63xx/Platform1
-rw-r--r--arch/mips/bcm63xx/cpu.c2
-rw-r--r--arch/mips/bcm63xx/dev-flash.c2
-rw-r--r--arch/mips/bmips/Platform1
-rw-r--r--arch/mips/boot/compressed/Makefile2
-rw-r--r--arch/mips/boot/dts/Makefile30
-rw-r--r--arch/mips/boot/dts/ingenic/ci20.dts3
-rw-r--r--arch/mips/boot/dts/ingenic/gcw0.dts505
-rw-r--r--arch/mips/boot/dts/ingenic/gcw0_proto.dts13
-rw-r--r--arch/mips/boot/dts/ingenic/jz4740.dtsi33
-rw-r--r--arch/mips/boot/dts/ingenic/jz4770.dtsi227
-rw-r--r--arch/mips/boot/dts/ingenic/jz4780.dtsi65
-rw-r--r--arch/mips/boot/dts/ingenic/x1000.dtsi9
-rw-r--r--arch/mips/boot/dts/loongson/rs780e-pch.dtsi17
-rw-r--r--arch/mips/boot/dts/mscc/ocelot.dtsi2
-rw-r--r--arch/mips/boot/dts/qca/ar9331.dtsi2
-rw-r--r--arch/mips/boot/dts/qca/ar9331_dpt_module.dts6
-rw-r--r--arch/mips/cavium-octeon/Platform1
-rw-r--r--arch/mips/cavium-octeon/executive/cvmx-helper-npi.c12
-rw-r--r--arch/mips/cavium-octeon/executive/cvmx-pko.c2
-rw-r--r--arch/mips/cavium-octeon/octeon-platform.c4
-rw-r--r--arch/mips/cavium-octeon/octeon-usb.c2
-rw-r--r--arch/mips/cobalt/Platform1
-rw-r--r--arch/mips/configs/ath79_defconfig1
-rw-r--r--arch/mips/configs/ci20_defconfig62
-rw-r--r--arch/mips/configs/db1xxx_defconfig1
-rw-r--r--arch/mips/configs/gcw0_defconfig131
-rw-r--r--arch/mips/configs/generic/board-ocelot.config1
-rw-r--r--arch/mips/configs/lasat_defconfig55
-rw-r--r--arch/mips/configs/loongson3_defconfig4
-rw-r--r--arch/mips/configs/markeins_defconfig185
-rw-r--r--arch/mips/configs/msp71xx_defconfig77
-rw-r--r--arch/mips/configs/pistachio_defconfig1
-rw-r--r--arch/mips/configs/rt305x_defconfig1
-rw-r--r--arch/mips/dec/Platform1
-rw-r--r--arch/mips/dec/int-handler.S4
-rw-r--r--arch/mips/dec/tc.c2
-rw-r--r--arch/mips/emma/Makefile7
-rw-r--r--arch/mips/emma/Platform4
-rw-r--r--arch/mips/emma/common/Makefile6
-rw-r--r--arch/mips/emma/common/prom.c56
-rw-r--r--arch/mips/emma/markeins/Makefile6
-rw-r--r--arch/mips/emma/markeins/irq.c293
-rw-r--r--arch/mips/emma/markeins/led.c44
-rw-r--r--arch/mips/emma/markeins/platform.c199
-rw-r--r--arch/mips/emma/markeins/setup.c115
-rw-r--r--arch/mips/fw/cfe/cfe_api.c5
-rw-r--r--arch/mips/generic/Platform1
-rw-r--r--arch/mips/include/asm/asm-eva.h2
-rw-r--r--arch/mips/include/asm/asm.h24
-rw-r--r--arch/mips/include/asm/asmmacro.h18
-rw-r--r--arch/mips/include/asm/bootinfo.h13
-rw-r--r--arch/mips/include/asm/branch.h3
-rw-r--r--arch/mips/include/asm/cacheops.h2
-rw-r--r--arch/mips/include/asm/clock.h49
-rw-r--r--arch/mips/include/asm/compiler.h5
-rw-r--r--arch/mips/include/asm/cpu-features.h47
-rw-r--r--arch/mips/include/asm/cpu-info.h11
-rw-r--r--arch/mips/include/asm/cpu-type.h7
-rw-r--r--arch/mips/include/asm/cpu.h18
-rw-r--r--arch/mips/include/asm/emma/emma2rh.h248
-rw-r--r--arch/mips/include/asm/emma/markeins.h28
-rw-r--r--arch/mips/include/asm/fpu.h6
-rw-r--r--arch/mips/include/asm/fpu_emulator.h4
-rw-r--r--arch/mips/include/asm/hazards.h8
-rw-r--r--arch/mips/include/asm/io.h87
-rw-r--r--arch/mips/include/asm/lasat/ds1603.h19
-rw-r--r--arch/mips/include/asm/lasat/eeprom.h18
-rw-r--r--arch/mips/include/asm/lasat/head.h23
-rw-r--r--arch/mips/include/asm/lasat/lasat.h245
-rw-r--r--arch/mips/include/asm/lasat/lasatint.h15
-rw-r--r--arch/mips/include/asm/lasat/picvue.h16
-rw-r--r--arch/mips/include/asm/lasat/serial.h14
-rw-r--r--arch/mips/include/asm/maar.h17
-rw-r--r--arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h1
-rw-r--r--arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h1
-rw-r--r--arch/mips/include/asm/mach-au1x00/ioremap.h38
-rw-r--r--arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h6
-rw-r--r--arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h4
-rw-r--r--arch/mips/include/asm/mach-bcm63xx/ioremap.h5
-rw-r--r--arch/mips/include/asm/mach-bmips/ioremap.h5
-rw-r--r--arch/mips/include/asm/mach-emma2rh/irq.h15
-rw-r--r--arch/mips/include/asm/mach-generic/ioremap.h9
-rw-r--r--arch/mips/include/asm/mach-generic/irq.h6
-rw-r--r--arch/mips/include/asm/mach-ip27/spaces.h12
-rw-r--r--arch/mips/include/asm/mach-ip30/war.h6
-rw-r--r--arch/mips/include/asm/mach-jz4740/base.h27
-rw-r--r--arch/mips/include/asm/mach-jz4740/dma.h23
-rw-r--r--arch/mips/include/asm/mach-jz4740/irq.h45
-rw-r--r--arch/mips/include/asm/mach-jz4740/timer.h126
-rw-r--r--arch/mips/include/asm/mach-lantiq/falcon/cpu-feature-overrides.h1
-rw-r--r--arch/mips/include/asm/mach-lasat/irq.h14
-rw-r--r--arch/mips/include/asm/mach-lasat/mach-gt64120.h28
-rw-r--r--arch/mips/include/asm/mach-loongson2ef/loongson.h1
-rw-r--r--arch/mips/include/asm/mach-loongson64/boot_param.h11
-rw-r--r--arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h1
-rw-r--r--arch/mips/include/asm/mach-loongson64/cpucfg-emul.h74
-rw-r--r--arch/mips/include/asm/mach-loongson64/loongson_regs.h29
-rw-r--r--arch/mips/include/asm/mach-loongson64/mc146818rtc.h36
-rw-r--r--arch/mips/include/asm/mach-loongson64/spaces.h8
-rw-r--r--arch/mips/include/asm/mach-pmcs-msp71xx/cpu-feature-overrides.h22
-rw-r--r--arch/mips/include/asm/mach-pmcs-msp71xx/msp_cic_int.h139
-rw-r--r--arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h343
-rw-r--r--arch/mips/include/asm/mach-pmcs-msp71xx/msp_int.h31
-rw-r--r--arch/mips/include/asm/mach-pmcs-msp71xx/msp_pci.h189
-rw-r--r--arch/mips/include/asm/mach-pmcs-msp71xx/msp_prom.h159
-rw-r--r--arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h237
-rw-r--r--arch/mips/include/asm/mach-pmcs-msp71xx/msp_regs.h652
-rw-r--r--arch/mips/include/asm/mach-pmcs-msp71xx/msp_slp_int.h129
-rw-r--r--arch/mips/include/asm/mach-pmcs-msp71xx/msp_usb.h124
-rw-r--r--arch/mips/include/asm/mach-pmcs-msp71xx/war.h28
-rw-r--r--arch/mips/include/asm/mach-ralink/mt7620/cpu-feature-overrides.h1
-rw-r--r--arch/mips/include/asm/mach-ralink/mt7621.h2
-rw-r--r--arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h1
-rw-r--r--arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h1
-rw-r--r--arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h1
-rw-r--r--arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h1
-rw-r--r--arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h1
-rw-r--r--arch/mips/include/asm/mach-rc32434/pci.h3
-rw-r--r--arch/mips/include/asm/mach-tx39xx/ioremap.h9
-rw-r--r--arch/mips/include/asm/mach-tx49xx/ioremap.h9
-rw-r--r--arch/mips/include/asm/mach-xilfpga/irq.h14
-rw-r--r--arch/mips/include/asm/mipsregs.h61
-rw-r--r--arch/mips/include/asm/nile4.h310
-rw-r--r--arch/mips/include/asm/octeon/cvmx-sli-defs.h2
-rw-r--r--arch/mips/include/asm/page.h2
-rw-r--r--arch/mips/include/asm/pgtable-64.h4
-rw-r--r--arch/mips/include/asm/pgtable-bits.h20
-rw-r--r--arch/mips/include/asm/pgtable.h108
-rw-r--r--arch/mips/include/asm/smp.h2
-rw-r--r--arch/mips/include/asm/stackframe.h2
-rw-r--r--arch/mips/include/asm/switch_to.h8
-rw-r--r--arch/mips/include/asm/unaligned-emul.h779
-rw-r--r--arch/mips/include/asm/vermagic.h6
-rw-r--r--arch/mips/include/uapi/asm/hwcap.h1
-rw-r--r--arch/mips/include/uapi/asm/inst.h26
-rw-r--r--arch/mips/jazz/Platform1
-rw-r--r--arch/mips/jz4740/Kconfig9
-rw-r--r--arch/mips/jz4740/Makefile7
-rw-r--r--arch/mips/jz4740/Platform1
-rw-r--r--arch/mips/jz4740/pm.c34
-rw-r--r--arch/mips/jz4740/prom.c19
-rw-r--r--arch/mips/jz4740/reset.c24
-rw-r--r--arch/mips/jz4740/reset.h7
-rw-r--r--arch/mips/jz4740/setup.c64
-rw-r--r--arch/mips/jz4740/time.c17
-rw-r--r--arch/mips/jz4740/timer.c42
-rw-r--r--arch/mips/kernel/8250-platform.c46
-rw-r--r--arch/mips/kernel/Makefile2
-rw-r--r--arch/mips/kernel/branch.c26
-rw-r--r--arch/mips/kernel/cevt-r4k.c44
-rw-r--r--arch/mips/kernel/cps-vec-ns16550.S18
-rw-r--r--arch/mips/kernel/cpu-probe.c171
-rw-r--r--arch/mips/kernel/csrc-r4k.c40
-rw-r--r--arch/mips/kernel/entry.S6
-rw-r--r--arch/mips/kernel/genex.S12
-rw-r--r--arch/mips/kernel/head.S3
-rw-r--r--arch/mips/kernel/idle.c5
-rw-r--r--arch/mips/kernel/mips-cm.c66
-rw-r--r--arch/mips/kernel/mips-r2-to-r6-emul.c2
-rw-r--r--arch/mips/kernel/perf_event_mipsxx.c373
-rw-r--r--arch/mips/kernel/proc.c4
-rw-r--r--arch/mips/kernel/r4k_fpu.S14
-rw-r--r--arch/mips/kernel/scall64-o32.S2
-rw-r--r--arch/mips/kernel/setup.c18
-rw-r--r--arch/mips/kernel/signal.c4
-rw-r--r--arch/mips/kernel/spram.c4
-rw-r--r--arch/mips/kernel/time.c70
-rw-r--r--arch/mips/kernel/traps.c52
-rw-r--r--arch/mips/kernel/unaligned.c776
-rw-r--r--arch/mips/kernel/vmlinux.lds.S2
-rw-r--r--arch/mips/kernel/watch.c26
-rw-r--r--arch/mips/kvm/emulate.c12
-rw-r--r--arch/mips/kvm/mips.c4
-rw-r--r--arch/mips/kvm/tlb.c4
-rw-r--r--arch/mips/kvm/vz.c16
-rw-r--r--arch/mips/lantiq/Platform1
-rw-r--r--arch/mips/lasat/Kconfig16
-rw-r--r--arch/mips/lasat/Makefile15
-rw-r--r--arch/mips/lasat/Platform7
-rw-r--r--arch/mips/lasat/at93c.c148
-rw-r--r--arch/mips/lasat/at93c.h19
-rw-r--r--arch/mips/lasat/ds1603.c190
-rw-r--r--arch/mips/lasat/ds1603.h32
-rw-r--r--arch/mips/lasat/image/Makefile53
-rw-r--r--arch/mips/lasat/image/head.S32
-rw-r--r--arch/mips/lasat/image/romscript.normal23
-rw-r--r--arch/mips/lasat/interrupt.c119
-rw-r--r--arch/mips/lasat/lasat_board.c268
-rw-r--r--arch/mips/lasat/lasat_models.h68
-rw-r--r--arch/mips/lasat/picvue.c242
-rw-r--r--arch/mips/lasat/picvue.h45
-rw-r--r--arch/mips/lasat/picvue_proc.c208
-rw-r--r--arch/mips/lasat/prom.c126
-rw-r--r--arch/mips/lasat/prom.h8
-rw-r--r--arch/mips/lasat/reset.c48
-rw-r--r--arch/mips/lasat/serial.c80
-rw-r--r--arch/mips/lasat/setup.c141
-rw-r--r--arch/mips/lasat/sysctl.c268
-rw-r--r--arch/mips/lib/csum_partial.S6
-rw-r--r--arch/mips/loongson2ef/Kconfig1
-rw-r--r--arch/mips/loongson2ef/Platform1
-rw-r--r--arch/mips/loongson2ef/common/init.c4
-rw-r--r--arch/mips/loongson2ef/lemote-2f/clock.c98
-rw-r--r--arch/mips/loongson32/Platform1
-rw-r--r--arch/mips/loongson64/Kconfig12
-rw-r--r--arch/mips/loongson64/Makefile6
-rw-r--r--arch/mips/loongson64/Platform1
-rw-r--r--arch/mips/loongson64/cop2-ex.c290
-rw-r--r--arch/mips/loongson64/cpucfg-emul.c227
-rw-r--r--arch/mips/loongson64/dma.c9
-rw-r--r--arch/mips/loongson64/env.c20
-rw-r--r--arch/mips/loongson64/init.c63
-rw-r--r--arch/mips/loongson64/pci.c51
-rw-r--r--arch/mips/loongson64/rtc.c39
-rw-r--r--arch/mips/loongson64/smp.c1
-rw-r--r--arch/mips/loongson64/time.c8
-rw-r--r--arch/mips/loongson64/vbios_quirk.c29
-rw-r--r--arch/mips/math-emu/cp1emu.c28
-rw-r--r--arch/mips/math-emu/dp_add.c3
-rw-r--r--arch/mips/math-emu/dp_div.c3
-rw-r--r--arch/mips/math-emu/dp_fmax.c6
-rw-r--r--arch/mips/math-emu/dp_fmin.c6
-rw-r--r--arch/mips/math-emu/dp_maddf.c3
-rw-r--r--arch/mips/math-emu/dp_mul.c3
-rw-r--r--arch/mips/math-emu/dp_sqrt.c5
-rw-r--r--arch/mips/math-emu/dp_sub.c3
-rw-r--r--arch/mips/math-emu/sp_add.c3
-rw-r--r--arch/mips/math-emu/sp_div.c3
-rw-r--r--arch/mips/math-emu/sp_fdp.c3
-rw-r--r--arch/mips/math-emu/sp_fmax.c6
-rw-r--r--arch/mips/math-emu/sp_fmin.c6
-rw-r--r--arch/mips/math-emu/sp_maddf.c3
-rw-r--r--arch/mips/math-emu/sp_mul.c3
-rw-r--r--arch/mips/math-emu/sp_sub.c3
-rw-r--r--arch/mips/mm/Makefile2
-rw-r--r--arch/mips/mm/c-r4k.c31
-rw-r--r--arch/mips/mm/cache.c1
-rw-r--r--arch/mips/mm/dma-noncoherent.c1
-rw-r--r--arch/mips/mm/init.c8
-rw-r--r--arch/mips/mm/ioremap.c151
-rw-r--r--arch/mips/mm/ioremap64.c23
-rw-r--r--arch/mips/mm/sc-mips.c7
-rw-r--r--arch/mips/mm/tlbex.c2
-rw-r--r--arch/mips/mti-malta/Platform1
-rw-r--r--arch/mips/mti-malta/malta-init.c8
-rw-r--r--arch/mips/netlogic/Platform1
-rw-r--r--arch/mips/netlogic/xlr/fmn.c2
-rw-r--r--arch/mips/oprofile/common.c2
-rw-r--r--arch/mips/oprofile/op_model_mipsxx.c26
-rw-r--r--arch/mips/paravirt/Platform1
-rw-r--r--arch/mips/pci/Makefile7
-rw-r--r--arch/mips/pci/fixup-emma2rh.c84
-rw-r--r--arch/mips/pci/fixup-loongson3.c71
-rw-r--r--arch/mips/pci/fixup-pmcmsp.c216
-rw-r--r--arch/mips/pci/fixup-sni.c3
-rw-r--r--arch/mips/pci/ops-bcm63xx.c2
-rw-r--r--arch/mips/pci/ops-emma2rh.c167
-rw-r--r--arch/mips/pci/ops-loongson3.c116
-rw-r--r--arch/mips/pci/ops-nile4.c136
-rw-r--r--arch/mips/pci/ops-pmcmsp.c944
-rw-r--r--arch/mips/pci/pci-alchemy.c2
-rw-r--r--arch/mips/pci/pci-emma2rh.c72
-rw-r--r--arch/mips/pci/pci-lasat.c88
-rw-r--r--arch/mips/pic32/Platform1
-rw-r--r--arch/mips/pistachio/Platform1
-rw-r--r--arch/mips/pistachio/init.c8
-rw-r--r--arch/mips/pmcs-msp71xx/Kconfig50
-rw-r--r--arch/mips/pmcs-msp71xx/Makefile13
-rw-r--r--arch/mips/pmcs-msp71xx/Platform7
-rw-r--r--arch/mips/pmcs-msp71xx/msp_elb.c46
-rw-r--r--arch/mips/pmcs-msp71xx/msp_eth.c111
-rw-r--r--arch/mips/pmcs-msp71xx/msp_hwbutton.c165
-rw-r--r--arch/mips/pmcs-msp71xx/msp_irq.c155
-rw-r--r--arch/mips/pmcs-msp71xx/msp_irq_cic.c208
-rw-r--r--arch/mips/pmcs-msp71xx/msp_irq_per.c127
-rw-r--r--arch/mips/pmcs-msp71xx/msp_irq_slp.c102
-rw-r--r--arch/mips/pmcs-msp71xx/msp_pci.c50
-rw-r--r--arch/mips/pmcs-msp71xx/msp_prom.c513
-rw-r--r--arch/mips/pmcs-msp71xx/msp_serial.c154
-rw-r--r--arch/mips/pmcs-msp71xx/msp_setup.c228
-rw-r--r--arch/mips/pmcs-msp71xx/msp_smp.c56
-rw-r--r--arch/mips/pmcs-msp71xx/msp_time.c90
-rw-r--r--arch/mips/pmcs-msp71xx/msp_usb.c173
-rw-r--r--arch/mips/pnx833x/Platform1
-rw-r--r--arch/mips/ralink/Platform1
-rw-r--r--arch/mips/ralink/bootrom.c2
-rw-r--r--arch/mips/ralink/mt7621.c43
-rw-r--r--arch/mips/rb532/Platform1
-rw-r--r--arch/mips/sgi-ip22/Platform2
-rw-r--r--arch/mips/sgi-ip27/Platform3
-rw-r--r--arch/mips/sgi-ip27/ip27-timer.c9
-rw-r--r--arch/mips/sgi-ip30/Platform3
-rw-r--r--arch/mips/sgi-ip32/Platform1
-rw-r--r--arch/mips/sibyte/Platform4
-rw-r--r--arch/mips/sni/Platform1
-rw-r--r--arch/mips/tools/elf-entry.c9
-rw-r--r--arch/mips/tools/loongson3-llsc-check.c2
-rw-r--r--arch/mips/txx9/Kconfig14
-rw-r--r--arch/mips/txx9/Platform3
-rw-r--r--arch/mips/vdso/Kconfig18
-rw-r--r--arch/mips/vdso/Makefile43
-rw-r--r--arch/mips/vdso/vdso.lds.S2
-rw-r--r--arch/mips/vr41xx/Makefile5
-rw-r--r--arch/mips/vr41xx/Platform3
-rw-r--r--drivers/cpufreq/loongson2_cpufreq.c22
-rw-r--r--drivers/pci/controller/Kconfig10
-rw-r--r--drivers/pci/controller/Makefile1
-rw-r--r--drivers/pci/controller/pci-loongson.c247
-rw-r--r--drivers/pci/probe.c2
-rw-r--r--drivers/platform/mips/Kconfig6
-rw-r--r--drivers/platform/mips/Makefile1
-rw-r--r--drivers/platform/mips/rs780e-acpi.c (renamed from arch/mips/loongson64/acpi_init.c)58
-rw-r--r--include/asm-generic/pgtable.h33
-rw-r--r--init/Kconfig3
-rw-r--r--mm/memory.c30
-rw-r--r--sound/soc/txx9/txx9aclc-ac97.c1
333 files changed, 4674 insertions, 13057 deletions
diff --git a/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml b/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml
new file mode 100644
index 000000000000..d317897e1115
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/loongson/rs780e-acpi.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mips/loongson/rs780e-acpi.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Loongson RS780E PCH ACPI Controller
+
+maintainers:
+ - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description: |
+ This controller can be found in Loongson-3 systems with RS780E PCH.
+
+properties:
+ compatible:
+ const: loongson,rs780e-acpi
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ isa@0 {
+ compatible = "isa";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <1 0 0 0x1000>;
+
+ acpi@800 {
+ compatible = "loongson,rs780e-acpi";
+ reg = <1 0x800 0x100>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/pci/loongson.yaml b/Documentation/devicetree/bindings/pci/loongson.yaml
new file mode 100644
index 000000000000..30e7cf1aeb87
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/loongson.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/loongson.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson PCI Host Controller
+
+maintainers:
+ - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description: |+
+ PCI host controller found on Loongson PCHs and SoCs.
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: loongson,ls2k-pci
+ - const: loongson,ls7a-pci
+ - const: loongson,rs780e-pci
+
+ reg:
+ minItems: 1
+ maxItems: 2
+ items:
+ - description: CFG0 standard config space register
+ - description: CFG1 extended config space register
+
+ ranges:
+ minItems: 1
+ maxItems: 3
+
+
+required:
+ - compatible
+ - reg
+ - ranges
+
+examples:
+ - |
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ pcie@1a000000 {
+ compatible = "loongson,rs780e-pci";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ // CPU_PHYSICAL(2) SIZE(2)
+ reg = <0x0 0x1a000000 0x0 0x2000000>;
+
+ // BUS_ADDRESS(3) CPU_PHYSICAL(2) SIZE(2)
+ ranges = <0x01000000 0x0 0x00004000 0x0 0x00004000 0x0 0x00004000>,
+ <0x02000000 0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>;
+ };
+ };
+...
diff --git a/arch/mips/Kbuild b/arch/mips/Kbuild
index a8d5e4fcbe53..d5d6ef9bb986 100644
--- a/arch/mips/Kbuild
+++ b/arch/mips/Kbuild
@@ -12,7 +12,7 @@ obj-y := $(platform-y)
# make clean traverses $(obj-) without having included .config, so
# everything ends up here
-obj- := $(platform-)
+obj- := $(platform-y)
# mips object files
# The object files are linked as core-y files would be linked
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index a69b272a3ab0..c7368a81fd1e 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -1,42 +1,44 @@
# SPDX-License-Identifier: GPL-2.0
# All platforms listed in alphabetic order
-platforms += alchemy
-platforms += ar7
-platforms += ath25
-platforms += ath79
-platforms += bcm47xx
-platforms += bcm63xx
-platforms += bmips
-platforms += cavium-octeon
-platforms += cobalt
-platforms += dec
-platforms += emma
-platforms += generic
-platforms += jazz
-platforms += jz4740
-platforms += lantiq
-platforms += lasat
-platforms += loongson2ef
-platforms += loongson32
-platforms += loongson64
-platforms += mti-malta
-platforms += netlogic
-platforms += paravirt
-platforms += pic32
-platforms += pistachio
-platforms += pmcs-msp71xx
-platforms += pnx833x
-platforms += ralink
-platforms += rb532
-platforms += sgi-ip22
-platforms += sgi-ip27
-platforms += sgi-ip30
-platforms += sgi-ip32
-platforms += sibyte
-platforms += sni
-platforms += txx9
-platforms += vr41xx
+platform-$(CONFIG_MIPS_ALCHEMY) += alchemy/
+platform-$(CONFIG_AR7) += ar7/
+platform-$(CONFIG_ATH25) += ath25/
+platform-$(CONFIG_ATH79) += ath79/
+platform-$(CONFIG_BCM47XX) += bcm47xx/
+platform-$(CONFIG_BCM63XX) += bcm63xx/
+platform-$(CONFIG_BMIPS_GENERIC) += bmips/
+platform-$(CONFIG_CAVIUM_OCTEON_SOC) += cavium-octeon/
+platform-$(CONFIG_MIPS_COBALT) += cobalt/
+platform-$(CONFIG_MACH_DECSTATION) += dec/
+platform-$(CONFIG_MIPS_GENERIC) += generic/
+platform-$(CONFIG_MACH_JAZZ) += jazz/
+platform-$(CONFIG_MACH_INGENIC) += jz4740/
+platform-$(CONFIG_LANTIQ) += lantiq/
+platform-$(CONFIG_MACH_LOONGSON2EF) += loongson2ef/
+platform-$(CONFIG_MACH_LOONGSON32) += loongson32/
+platform-$(CONFIG_MACH_LOONGSON64) += loongson64/
+platform-$(CONFIG_MIPS_MALTA) += mti-malta/
+platform-$(CONFIG_NLM_COMMON) += netlogic/
+platform-$(CONFIG_MIPS_PARAVIRT) += paravirt/
+platform-$(CONFIG_PIC32MZDA) += pic32/
+platform-$(CONFIG_MACH_PISTACHIO) += pistachio/
+platform-$(CONFIG_SOC_PNX833X) += pnx833x/
+platform-$(CONFIG_RALINK) += ralink/
+platform-$(CONFIG_MIKROTIK_RB532) += rb532/
+platform-$(CONFIG_SGI_IP22) += sgi-ip22/
+platform-$(CONFIG_SGI_IP27) += sgi-ip27/
+platform-$(CONFIG_SGI_IP28) += sgi-ip22/
+platform-$(CONFIG_SGI_IP30) += sgi-ip30/
+platform-$(CONFIG_SGI_IP32) += sgi-ip32/
+platform-$(CONFIG_SIBYTE_BCM112X) += sibyte/
+platform-$(CONFIG_SIBYTE_SB1250) += sibyte/
+platform-$(CONFIG_SIBYTE_BCM1x55) += sibyte/
+platform-$(CONFIG_SIBYTE_BCM1x80) += sibyte/
+platform-$(CONFIG_SNI_RM) += sni/
+platform-$(CONFIG_MACH_TX39XX) += txx9/
+platform-$(CONFIG_MACH_TX49XX) += txx9/
+platform-$(CONFIG_MACH_VR41XX) += vr41xx/
# include the platform specific files
-include $(patsubst %, $(srctree)/arch/mips/%/Platform, $(platforms))
+include $(patsubst %, $(srctree)/arch/mips/%/Platform, $(platform-y))
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 690718b3701a..b6338e806a4b 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -92,6 +92,9 @@ config MIPS
select SYSCTL_EXCEPTION_TRACE
select VIRT_TO_BUS
+config MIPS_FIXUP_BIGPHYS_ADDR
+ bool
+
menu "Machine selection"
choice
@@ -157,6 +160,7 @@ config MIPS_ALCHEMY
select CSRC_R4K
select IRQ_MIPS_CPU
select DMA_MAYBE_COHERENT # Au1000,1500,1100 aren't, rest is
+ select MIPS_FIXUP_BIGPHYS_ADDR if PCI
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_APM_EMULATION
@@ -427,23 +431,6 @@ config LANTIQ
select ARCH_HAS_RESET_CONTROLLER
select RESET_CONTROLLER
-config LASAT
- bool "LASAT Networks platforms"
- select CEVT_R4K
- select CRC32
- select CSRC_R4K
- select DMA_NONCOHERENT
- select SYS_HAS_EARLY_PRINTK
- select HAVE_PCI
- select IRQ_MIPS_CPU
- select PCI_GT64XXX_PCI0
- select MIPS_NILE4
- select R5000_CPU_SCACHE
- select SYS_HAS_CPU_R5000
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
config MACH_LOONGSON32
bool "Loongson 32-bit family of machines"
select SYS_SUPPORTS_ZBOOT
@@ -475,8 +462,10 @@ config MACH_LOONGSON64
select ISA
select I8259
select IRQ_MIPS_CPU
- select NR_CPUS_DEFAULT_4
+ select NO_EXCEPT_FILL
+ select NR_CPUS_DEFAULT_64
select USE_GENERIC_EARLY_PRINTK_8250
+ select PCI_DRIVERS_GENERIC
select SYS_HAS_CPU_LOONGSON64
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_SMP
@@ -593,13 +582,6 @@ config MACH_PIC32
Microchip PIC32 is a family of general-purpose 32 bit MIPS core
microcontrollers.
-config NEC_MARKEINS
- bool "NEC EMMA2RH Mark-eins board"
- select SOC_EMMA2RH
- select HAVE_PCI
- help
- This enables support for the NEC Electronics Mark-eins boards.
-
config MACH_VR41XX
bool "NEC VR4100 series based machines"
select CEVT_R4K
@@ -621,30 +603,6 @@ config NXP_STB225
help
Support for NXP Semiconductors STB225 Development Board.
-config PMC_MSP
- bool "PMC-Sierra MSP chipsets"
- select CEVT_R4K
- select CSRC_R4K
- select DMA_NONCOHERENT
- select SWAP_IO_SPACE
- select NO_EXCEPT_FILL
- select BOOT_RAW
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_HAS_CPU_MIPS32_R2
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_MIPS16
- select IRQ_MIPS_CPU
- select SERIAL_8250
- select SERIAL_8250_CONSOLE
- select USB_EHCI_BIG_ENDIAN_MMIO
- select USB_EHCI_BIG_ENDIAN_DESC
- help
- This adds support for the PMC-Sierra family of Multi-Service
- Processor System-On-A-Chips. These parts include a number
- of integrated peripherals, interfaces and DSPs in addition to
- a variety of MIPS cores.
-
config RALINK
bool "Ralink based machines"
select CEVT_R4K
@@ -1087,10 +1045,8 @@ source "arch/mips/generic/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/jz4740/Kconfig"
source "arch/mips/lantiq/Kconfig"
-source "arch/mips/lasat/Kconfig"
source "arch/mips/pic32/Kconfig"
source "arch/mips/pistachio/Kconfig"
-source "arch/mips/pmcs-msp71xx/Kconfig"
source "arch/mips/ralink/Kconfig"
source "arch/mips/sgi-ip27/Kconfig"
source "arch/mips/sibyte/Kconfig"
@@ -1154,6 +1110,7 @@ config CSRC_IOASIC
bool
config CSRC_R4K
+ select CLOCKSOURCE_WATCHDOG if CPU_FREQ
bool
config CSRC_SB1250
@@ -1211,9 +1168,6 @@ config MIPS_BONITO64
config MIPS_MSC
bool
-config MIPS_NILE4
- bool
-
config SYNC_R4K
bool
@@ -1334,18 +1288,6 @@ config PCI_XTALK_BRIDGE
config NO_EXCEPT_FILL
bool
-config SOC_EMMA2RH
- bool
- select CEVT_R4K
- select CSRC_R4K
- select DMA_NONCOHERENT
- select IRQ_MIPS_CPU
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_R5500
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- select SYS_SUPPORTS_BIG_ENDIAN
-
config SOC_PNX833X
bool
select CEVT_R4K
@@ -1419,9 +1361,6 @@ config MIPS_L1_CACHE_SHIFT
default "4" if MIPS_L1_CACHE_SHIFT_4
default "5"
-config HAVE_STD_PC_SERIAL_PORT
- bool
-
config ARC_CMDLINE_ONLY
bool
@@ -1504,6 +1443,18 @@ config CPU_LOONGSON3_WORKAROUNDS
If unsure, please say Y.
+config CPU_LOONGSON3_CPUCFG_EMULATION
+ bool "Emulate the CPUCFG instruction on older Loongson cores"
+ default y
+ depends on CPU_LOONGSON64
+ help
+ Loongson-3A R4 and newer have the CPUCFG instruction available for
+ userland to query CPU capabilities, much like CPUID on x86. This
+ option provides emulation of the instruction on older Loongson
+ cores, back to Loongson-3A1000.
+
+ If unsure, please say Y.
+
config CPU_LOONGSON2E
bool "Loongson 2E"
depends on SYS_HAS_CPU_LOONGSON2E
@@ -1580,6 +1531,21 @@ config CPU_MIPS32_R2
specific type of processor in your system, choose those that one
otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
+config CPU_MIPS32_R5
+ bool "MIPS32 Release 5"
+ depends on SYS_HAS_CPU_MIPS32_R5
+ select CPU_HAS_PREFETCH
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+ select CPU_SUPPORTS_MSA
+ select HAVE_KVM
+ select MIPS_O32_FP64_SUPPORT
+ help
+ Choose this option to build a kernel for release 5 or later of the
+ MIPS32 architecture. New MIPS processors, starting with the Warrior
+ family, are based on a MIPS32r5 processor. If you own an older
+ processor, you probably need to select MIPS32r1 or MIPS32r2 instead.
+
config CPU_MIPS32_R6
bool "MIPS32 Release 6"
depends on SYS_HAS_CPU_MIPS32_R6
@@ -1632,6 +1598,23 @@ config CPU_MIPS64_R2
specific type of processor in your system, choose those that one
otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
+config CPU_MIPS64_R5
+ bool "MIPS64 Release 5"
+ depends on SYS_HAS_CPU_MIPS64_R5
+ select CPU_HAS_PREFETCH
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_64BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+ select CPU_SUPPORTS_HUGEPAGES
+ select CPU_SUPPORTS_MSA
+ select MIPS_O32_FP64_SUPPORT if 32BIT || MIPS32_O32
+ select HAVE_KVM
+ help
+ Choose this option to build a kernel for release 5 or later of the
+ MIPS64 architecture. This is a intermediate MIPS architecture
+ release partly implementing release 6 features. Though there is no
+ any hardware known to be based on this release.
+
config CPU_MIPS64_R6
bool "MIPS64 Release 6"
depends on SYS_HAS_CPU_MIPS64_R6
@@ -1650,6 +1633,28 @@ config CPU_MIPS64_R6
family, are based on a MIPS64r6 processor. If you own an older
processor, you probably need to select MIPS64r1 or MIPS64r2 instead.
+config CPU_P5600
+ bool "MIPS Warrior P5600"
+ depends on SYS_HAS_CPU_P5600
+ select CPU_HAS_PREFETCH
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+ select CPU_SUPPORTS_MSA
+ select CPU_SUPPORTS_UNCACHED_ACCELERATED
+ select CPU_SUPPORTS_CPUFREQ
+ select CPU_MIPSR2_IRQ_VI
+ select CPU_MIPSR2_IRQ_EI
+ select HAVE_KVM
+ select MIPS_O32_FP64_SUPPORT
+ help
+ Choose this option to build a kernel for MIPS Warrior P5600 CPU.
+ It's based on MIPS32r5 ISA with XPA, EVA, dual/quad issue exec pipes,
+ MMU with two-levels TLB, UCA, MSA, MDU core level features and system
+ level features like up to six P5600 calculation cores, CM2 with L2
+ cache, IOCU/IOMMU (though might be unused depending on the system-
+ specific IP core configuration), GIC, CPC, virtualisation module,
+ eJTAG and PDtrace.
+
config CPU_R3000
bool "R3000"
depends on SYS_HAS_CPU_R3000
@@ -1826,7 +1831,8 @@ endchoice
config CPU_MIPS32_3_5_FEATURES
bool "MIPS32 Release 3.5 Features"
depends on SYS_HAS_CPU_MIPS32_R3_5
- depends on CPU_MIPS32_R2 || CPU_MIPS32_R6
+ depends on CPU_MIPS32_R2 || CPU_MIPS32_R5 || CPU_MIPS32_R6 || \
+ CPU_P5600
help
Choose this option to build a kernel for release 2 or later of the
MIPS32 architecture including features from the 3.5 release such as
@@ -1846,7 +1852,7 @@ config CPU_MIPS32_3_5_EVA
config CPU_MIPS32_R5_FEATURES
bool "MIPS32 Release 5 Features"
depends on SYS_HAS_CPU_MIPS32_R5
- depends on CPU_MIPS32_R2
+ depends on CPU_MIPS32_R2 || CPU_MIPS32_R5 || CPU_P5600
help
Choose this option to build a kernel for release 2 or later of the
MIPS32 architecture including features from release 5 such as
@@ -2001,6 +2007,10 @@ config SYS_HAS_CPU_MIPS64_R6
bool
select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
+config SYS_HAS_CPU_P5600
+ bool
+ select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
+
config SYS_HAS_CPU_R3000
bool
@@ -2084,11 +2094,13 @@ endmenu
#
config CPU_MIPS32
bool
- default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 || CPU_MIPS32_R6
+ default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 || CPU_MIPS32_R5 || \
+ CPU_MIPS32_R6 || CPU_P5600
config CPU_MIPS64
bool
- default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 || CPU_MIPS64_R6
+ default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 || CPU_MIPS64_R5 || \
+ CPU_MIPS64_R6
#
# These indicate the revision of the architecture
@@ -2104,6 +2116,13 @@ config CPU_MIPSR2
select CPU_HAS_DIEI if !CPU_DIEI_BROKEN
select MIPS_SPRAM
+config CPU_MIPSR5
+ bool
+ default y if CPU_MIPS32_R5 || CPU_MIPS64_R5 || CPU_P5600
+ select CPU_HAS_RIXI
+ select CPU_HAS_DIEI if !CPU_DIEI_BROKEN
+ select MIPS_SPRAM
+
config CPU_MIPSR6
bool
default y if CPU_MIPS32_R6 || CPU_MIPS64_R6
@@ -2118,6 +2137,7 @@ config TARGET_ISA_REV
int
default 1 if CPU_MIPSR1
default 2 if CPU_MIPSR2
+ default 5 if CPU_MIPSR5
default 6 if CPU_MIPSR6
default 0
help
@@ -2707,7 +2727,11 @@ config NEED_PER_CPU_EMBED_FIRST_CHUNK
config RELOCATABLE
bool "Relocatable kernel"
- depends on SYS_SUPPORTS_RELOCATABLE && (CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_MIPS32_R6 || CPU_MIPS64_R6 || CAVIUM_OCTEON_SOC)
+ depends on SYS_SUPPORTS_RELOCATABLE
+ depends on CPU_MIPS32_R2 || CPU_MIPS64_R2 || \
+ CPU_MIPS32_R5 || CPU_MIPS64_R5 || \
+ CPU_MIPS32_R6 || CPU_MIPS64_R6 || \
+ CPU_P5600 || CAVIUM_OCTEON_SOC
help
This builds a kernel image that retains relocation information
so it can be loaded someplace besides the default 1MB.
@@ -3275,3 +3299,5 @@ endmenu
source "drivers/firmware/Kconfig"
source "arch/mips/kvm/Kconfig"
+
+source "arch/mips/vdso/Kconfig"
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index 93a2974d2ab7..7a8d94cdd493 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -148,4 +148,14 @@ config MIPS_CPS_NS16550_SHIFT
form their addresses. That is, log base 2 of the span between
adjacent ns16550 registers in the system.
+config MIPS_CPS_NS16550_WIDTH
+ int "UART Register Width"
+ default 1
+ help
+ ns16550 registers width. UART registers IO access methods will be
+ selected in accordance with this parameter. By setting it to 1, 2 or
+ 4 UART registers will be accessed by means of lb/sb, lh/sh or lw/sw
+ instructions respectively. Any value not from that set activates
+ lb/sb instructions.
+
endif # MIPS_CPS_NS16550_BOOL
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index e1c44aed8156..0d0f29d662c9 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -116,33 +116,8 @@ endif
cflags-y += -ffreestanding
-#
-# We explicitly add the endianness specifier if needed, this allows
-# to compile kernels with a toolchain for the other endianness. We
-# carefully avoid to add it redundantly because gcc 3.3/3.4 complains
-# when fed the toolchain default!
-#
-# Certain gcc versions up to gcc 4.1.1 (probably 4.2-subversion as of
-# 2006-10-10 don't properly change the predefined symbols if -EB / -EL
-# are used, so we kludge that here. A bug has been filed at
-# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=29413.
-#
-# clang doesn't suffer from these issues and our checks against -dumpmachine
-# don't work so well when cross compiling, since without providing --target
-# clang's output will be based upon the build machine. So for clang we simply
-# unconditionally specify -EB or -EL as appropriate.
-#
-ifdef CONFIG_CC_IS_CLANG
cflags-$(CONFIG_CPU_BIG_ENDIAN) += -EB
cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -EL
-else
-undef-all += -UMIPSEB -U_MIPSEB -U__MIPSEB -U__MIPSEB__
-undef-all += -UMIPSEL -U_MIPSEL -U__MIPSEL -U__MIPSEL__
-predef-be += -DMIPSEB -D_MIPSEB -D__MIPSEB -D__MIPSEB__
-predef-le += -DMIPSEL -D_MIPSEL -D__MIPSEL -D__MIPSEL__
-cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB $(undef-all) $(predef-be))
-cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL $(undef-all) $(predef-le))
-endif
cflags-$(CONFIG_SB1XXX_CORELIS) += $(call cc-option,-mno-sched-prolog) \
-fno-omit-frame-pointer
@@ -171,10 +146,13 @@ cflags-$(CONFIG_CPU_R4X00) += -march=r4600 -Wa,--trap
cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS32_R1) += -march=mips32 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS32_R2) += -march=mips32r2 -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS32_R5) += -march=mips32r5 -Wa,--trap -modd-spreg
cflags-$(CONFIG_CPU_MIPS32_R6) += -march=mips32r6 -Wa,--trap -modd-spreg
cflags-$(CONFIG_CPU_MIPS64_R1) += -march=mips64 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS64_R2) += -march=mips64r2 -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS64_R5) += -march=mips64r5 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS64_R6) += -march=mips64r6 -Wa,--trap
+cflags-$(CONFIG_CPU_P5600) += -march=p5600 -Wa,--trap -modd-spreg
cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap
cflags-$(CONFIG_CPU_R5500) += $(call cc-option,-march=r5500,-march=r5000) \
-Wa,--trap
@@ -288,12 +266,23 @@ ifdef CONFIG_64BIT
endif
endif
+# When linking a 32-bit executable the LLVM linker cannot cope with a
+# 32-bit load address that has been sign-extended to 64 bits. Simply
+# remove the upper 32 bits then, as it is safe to do so with other
+# linkers.
+ifdef CONFIG_64BIT
+ load-ld = $(load-y)
+else
+ load-ld = $(subst 0xffffffff,0x,$(load-y))
+endif
+
KBUILD_AFLAGS += $(cflags-y)
KBUILD_CFLAGS += $(cflags-y)
-KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y)
+KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y) -DLINKER_LOAD_ADDRESS=$(load-ld)
KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)
bootvars-y = VMLINUX_LOAD_ADDRESS=$(load-y) \
+ LINKER_LOAD_ADDRESS=$(load-ld) \
VMLINUX_ENTRY_ADDRESS=$(entry-y) \
PLATFORM="$(platform-y)" \
ITS_INPUTS="$(its-y)"
@@ -359,12 +348,6 @@ ifeq ($(shell expr $(zload-y) \< 0xffffffff80000000 2> /dev/null), 0)
bootz-y += uzImage.bin
endif
-ifdef CONFIG_LASAT
-rom.bin rom.sw: vmlinux
- $(Q)$(MAKE) $(build)=arch/mips/lasat/image \
- $(bootvars-y) $@
-endif
-
#
# Some machines like the Indy need 32-bit ELF binaries for booting purposes.
# Other need ECOFF, so we build a 32-bit ELF binary for them which we then
@@ -430,7 +413,6 @@ archclean:
$(Q)$(MAKE) $(clean)=arch/mips/boot
$(Q)$(MAKE) $(clean)=arch/mips/boot/compressed
$(Q)$(MAKE) $(clean)=arch/mips/boot/tools
- $(Q)$(MAKE) $(clean)=arch/mips/lasat
archheaders:
$(Q)$(MAKE) $(build)=arch/mips/kernel/syscalls all
diff --git a/arch/mips/alchemy/Platform b/arch/mips/alchemy/Platform
index 33c9da3b077b..c8cff50b0eda 100644
--- a/arch/mips/alchemy/Platform
+++ b/arch/mips/alchemy/Platform
@@ -15,19 +15,16 @@ load-$(CONFIG_MIPS_DB1XXX) += 0xffffffff80100000
#
# 4G-Systems MTX-1 "MeshCube" wireless router
#
-platform-$(CONFIG_MIPS_MTX1) += alchemy/
load-$(CONFIG_MIPS_MTX1) += 0xffffffff80100000
#
# MyCable eval board
#
-platform-$(CONFIG_MIPS_XXS1500) += alchemy/
load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000
#
# Trapeze ITS GRP board
#
-platform-$(CONFIG_MIPS_GPR) += alchemy/
load-$(CONFIG_MIPS_GPR) += 0xffffffff80100000
# boards can specify their own <gpio.h> in one of their include dirs.
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 7faaa6d593a7..0f60efe0481e 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -27,6 +27,7 @@
#include <linux/init.h>
#include <linux/ioport.h>
+#include <linux/mm.h>
#include <asm/dma-coherence.h>
#include <asm/mipsregs.h>
@@ -72,9 +73,9 @@ void __init plat_mem_setup(void)
iomem_resource.end = IOMEM_RESOURCE_END;
}
-#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_PCI)
+#ifdef CONFIG_MIPS_FIXUP_BIGPHYS_ADDR
/* This routine should be valid for all Au1x based boards */
-phys_addr_t __fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
+phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
{
unsigned long start = ALCHEMY_PCI_MEMWIN_START;
unsigned long end = ALCHEMY_PCI_MEMWIN_END;
@@ -90,5 +91,13 @@ phys_addr_t __fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
/* default nop */
return phys_addr;
}
-EXPORT_SYMBOL(__fixup_bigphys_addr);
-#endif
+
+int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long vaddr,
+ unsigned long pfn, unsigned long size, pgprot_t prot)
+{
+ phys_addr_t phys_addr = fixup_bigphys_addr(pfn << PAGE_SHIFT, size);
+
+ return remap_pfn_range(vma, vaddr, phys_addr >> PAGE_SHIFT, size, prot);
+}
+EXPORT_SYMBOL(io_remap_pfn_range);
+#endif /* CONFIG_MIPS_FIXUP_BIGPHYS_ADDR */
diff --git a/arch/mips/alchemy/devboards/db1550.c b/arch/mips/alchemy/devboards/db1550.c
index 3e0c75c0ece0..752b93d91ac9 100644
--- a/arch/mips/alchemy/devboards/db1550.c
+++ b/arch/mips/alchemy/devboards/db1550.c
@@ -225,7 +225,7 @@ static void __init pb1550_nand_setup(void)
case 0: case 2: case 8: case 0xC: case 0xD:
/* x16 NAND Flash */
pb1550_nand_pd.devwidth = 1;
- /* fallthrough */
+ fallthrough;
case 1: case 3: case 9: case 0xE: case 0xF:
/* x8 NAND, already set up */
platform_device_register(&pb1550_nand_dev);
diff --git a/arch/mips/ar7/Platform b/arch/mips/ar7/Platform
index 21f9102d533c..a9257cc01c3c 100644
--- a/arch/mips/ar7/Platform
+++ b/arch/mips/ar7/Platform
@@ -1,6 +1,5 @@
#
# Texas Instruments AR7
#
-platform-$(CONFIG_AR7) += ar7/
cflags-$(CONFIG_AR7) += -I$(srctree)/arch/mips/include/asm/mach-ar7
load-$(CONFIG_AR7) += 0xffffffff94100000
diff --git a/arch/mips/ar7/setup.c b/arch/mips/ar7/setup.c
index b3ffe7c898eb..352d5dbc777c 100644
--- a/arch/mips/ar7/setup.c
+++ b/arch/mips/ar7/setup.c
@@ -57,7 +57,7 @@ const char *get_system_type(void)
case TITAN_CHIP_1060:
return "TI AR7 (TNETV1060)";
}
- /* fall through */
+ fallthrough;
default:
return "TI AR7 (unknown)";
}
diff --git a/arch/mips/ath25/Platform b/arch/mips/ath25/Platform
index ef3f81fa080b..aef098b6f405 100644
--- a/arch/mips/ath25/Platform
+++ b/arch/mips/ath25/Platform
@@ -1,6 +1,5 @@
#
# Atheros AR531X/AR231X WiSoC
#
-platform-$(CONFIG_ATH25) += ath25/
cflags-$(CONFIG_ATH25) += -I$(srctree)/arch/mips/include/asm/mach-ath25
load-$(CONFIG_ATH25) += 0xffffffff80041000
diff --git a/arch/mips/ath79/Platform b/arch/mips/ath79/Platform
index 2bd663647d27..57744472ed2e 100644
--- a/arch/mips/ath79/Platform
+++ b/arch/mips/ath79/Platform
@@ -2,6 +2,5 @@
# Atheros AR71xx/AR724x/AR913x
#
-platform-$(CONFIG_ATH79) += ath79/
cflags-$(CONFIG_ATH79) += -I$(srctree)/arch/mips/include/asm/mach-ath79
load-$(CONFIG_ATH79) = 0xffffffff80060000
diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c
index acb4fd647a30..4b7c066ac88e 100644
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -153,8 +153,7 @@ static void __init ath79_detect_sys_type(void)
case REV_ID_MAJOR_QCA9533_V2:
ver = 2;
ath79_soc_rev = 2;
- /* fall through */
-
+ fallthrough;
case REV_ID_MAJOR_QCA9533:
ath79_soc = ATH79_SOC_QCA9533;
chip = "9533";
diff --git a/arch/mips/bcm47xx/Platform b/arch/mips/bcm47xx/Platform
index 70783b75fd9d..833b204fe5da 100644
--- a/arch/mips/bcm47xx/Platform
+++ b/arch/mips/bcm47xx/Platform
@@ -1,7 +1,6 @@
#
# Broadcom BCM47XX boards
#
-platform-$(CONFIG_BCM47XX) += bcm47xx/
cflags-$(CONFIG_BCM47XX) += \
-I$(srctree)/arch/mips/include/asm/mach-bcm47xx
load-$(CONFIG_BCM47XX) := 0xffffffff80001000
diff --git a/arch/mips/bcm63xx/Platform b/arch/mips/bcm63xx/Platform
index 5f86b2fff6de..882dc40f49a2 100644
--- a/arch/mips/bcm63xx/Platform
+++ b/arch/mips/bcm63xx/Platform
@@ -1,7 +1,6 @@
#
# Broadcom BCM63XX boards
#
-platform-$(CONFIG_BCM63XX) += bcm63xx/
cflags-$(CONFIG_BCM63XX) += \
-I$(srctree)/arch/mips/include/asm/mach-bcm63xx/
load-$(CONFIG_BCM63XX) := 0xffffffff80010000
diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c
index f61c16f57a97..8e3e199dd35d 100644
--- a/arch/mips/bcm63xx/cpu.c
+++ b/arch/mips/bcm63xx/cpu.c
@@ -304,7 +304,7 @@ void __init bcm63xx_cpu_init(void)
case CPU_BMIPS3300:
if ((read_c0_prid() & PRID_IMP_MASK) != PRID_IMP_BMIPS3300_ALT)
__cpu_name[cpu] = "Broadcom BCM6338";
- /* fall-through */
+ fallthrough;
case CPU_BMIPS32:
chipid_reg = BCM_6345_PERF_BASE;
break;
diff --git a/arch/mips/bcm63xx/dev-flash.c b/arch/mips/bcm63xx/dev-flash.c
index a1093934c616..f9cc015d3dc9 100644
--- a/arch/mips/bcm63xx/dev-flash.c
+++ b/arch/mips/bcm63xx/dev-flash.c
@@ -94,7 +94,7 @@ static int __init bcm63xx_detect_flash_type(void)
case STRAPBUS_6368_BOOT_SEL_PARALLEL:
return BCM63XX_FLASH_TYPE_PARALLEL;
}
- /* fall through */
+ fallthrough;
default:
return -EINVAL;
}
diff --git a/arch/mips/bmips/Platform b/arch/mips/bmips/Platform
index 5f127fd7f4b5..1434ea31ce85 100644
--- a/arch/mips/bmips/Platform
+++ b/arch/mips/bmips/Platform
@@ -1,7 +1,6 @@
#
# Broadcom Generic BMIPS kernel
#
-platform-$(CONFIG_BMIPS_GENERIC) += bmips/
cflags-$(CONFIG_BMIPS_GENERIC) += \
-I$(srctree)/arch/mips/include/asm/mach-bmips/
load-$(CONFIG_BMIPS_GENERIC) := 0xffffffff80010000
diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index 0df0ee8a298d..6e56caef69f0 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -90,7 +90,7 @@ ifneq ($(zload-y),)
VMLINUZ_LOAD_ADDRESS := $(zload-y)
else
VMLINUZ_LOAD_ADDRESS = $(shell $(obj)/calc_vmlinuz_load_addr \
- $(obj)/vmlinux.bin $(VMLINUX_LOAD_ADDRESS))
+ $(obj)/vmlinux.bin $(LINKER_LOAD_ADDRESS))
endif
UIMAGE_LOADADDR = $(VMLINUZ_LOAD_ADDRESS)
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
index d429a69bfe30..19027129add8 100644
--- a/arch/mips/boot/dts/Makefile
+++ b/arch/mips/boot/dts/Makefile
@@ -1,17 +1,19 @@
# SPDX-License-Identifier: GPL-2.0
-subdir-y += brcm
-subdir-y += cavium-octeon
-subdir-y += img
-subdir-y += ingenic
-subdir-y += lantiq
-subdir-y += loongson
-subdir-y += mscc
-subdir-y += mti
-subdir-y += netlogic
-subdir-y += ni
-subdir-y += pic32
-subdir-y += qca
-subdir-y += ralink
-subdir-y += xilfpga
+subdir-$(CONFIG_BMIPS_GENERIC) += brcm
+subdir-$(CONFIG_CAVIUM_OCTEON_SOC) += cavium-octeon
+subdir-$(CONFIG_MACH_PISTACHIO) += img
+subdir-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += img
+subdir-$(CONFIG_MACH_INGENIC) += ingenic
+subdir-$(CONFIG_LANTIQ) += lantiq
+subdir-$(CONFIG_MACH_LOONGSON64) += loongson
+subdir-$(CONFIG_MSCC_OCELOT) += mscc
+subdir-$(CONFIG_MIPS_MALTA) += mti
+subdir-$(CONFIG_LEGACY_BOARD_SEAD3) += mti
+subdir-$(CONFIG_NLM_XLP_BOARD) += netlogic
+subdir-$(CONFIG_FIT_IMAGE_FDT_NI169445) += ni
+subdir-$(CONFIG_MACH_PIC32) += pic32
+subdir-$(CONFIG_ATH79) += qca
+subdir-$(CONFIG_RALINK) += ralink
+subdir-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += xilfpga
obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y))
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index db0ca250bd1a..75f5bfbf2c37 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -386,6 +386,9 @@
interrupt-parent = <&gpe>;
interrupts = <19 4>;
+
+ nvmem-cells = <&eth0_addr>;
+ nvmem-cell-names = "mac-address";
};
};
diff --git a/arch/mips/boot/dts/ingenic/gcw0.dts b/arch/mips/boot/dts/ingenic/gcw0.dts
index f58d239c2058..8d22828787d8 100644
--- a/arch/mips/boot/dts/ingenic/gcw0.dts
+++ b/arch/mips/boot/dts/ingenic/gcw0.dts
@@ -4,6 +4,10 @@
#include "jz4770.dtsi"
#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/adc/ingenic,adc.h>
+#include <dt-bindings/input/input.h>
+
/ {
compatible = "gcw,zero", "ingenic,jz4770";
model = "GCW Zero";
@@ -15,20 +19,370 @@
serial3 = &uart3;
};
+ memory: memory {
+ device_type = "memory";
+ reg = <0x0 0x10000000>,
+ <0x30000000 0x10000000>;
+ };
+
chosen {
stdout-path = "serial2:57600n8";
};
- board {
- compatible = "simple-bus";
+ vcc: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ mmc1_power: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "mmc1_vcc";
+ gpio = <&gpe 9 0>;
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc>;
+ };
+
+ headphones_amp: analog-amplifier@0 {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpf 3 GPIO_ACTIVE_LOW>;
+ enable-delay-ms = <50>;
+
+ VCC-supply = <&ldo5>;
+ sound-name-prefix = "Headphones Amp";
+ };
+
+ speaker_amp: analog-amplifier@1 {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpf 20 GPIO_ACTIVE_HIGH>;
+
+ VCC-supply = <&ldo5>;
+ sound-name-prefix = "Speaker Amp";
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,name = "gcw0-audio";
+ simple-audio-card,format = "i2s";
+
+ simple-audio-card,widgets =
+ "Speaker", "Speaker",
+ "Headphone", "Headphones",
+ "Line", "FM Radio",
+ "Microphone", "Built-in Mic";
+ simple-audio-card,routing =
+ "Headphones Amp INL", "LHPOUT",
+ "Headphones Amp INR", "RHPOUT",
+ "Headphones", "Headphones Amp OUTL",
+ "Headphones", "Headphones Amp OUTR",
+ "Speaker Amp INL", "LOUT",
+ "Speaker Amp INR", "ROUT",
+ "Speaker", "Speaker Amp OUTL",
+ "Speaker", "Speaker Amp OUTR",
+ "LLINEIN", "FM Radio",
+ "RLINEIN", "FM Radio",
+ "Built-in Mic", "MICBIAS",
+ "MIC1P", "Built-in Mic",
+ "MIC1N", "Built-in Mic";
+ simple-audio-card,pin-switches = "Speaker", "Headphones";
+
+ simple-audio-card,hp-det-gpio = <&gpf 21 GPIO_ACTIVE_HIGH>;
+ simple-audio-card,aux-devs = <&speaker_amp>, <&headphones_amp>;
+
+ simple-audio-card,bitclock-master = <&dai_codec>;
+ simple-audio-card,frame-master = <&dai_codec>;
+
+ dai_cpu: simple-audio-card,cpu {
+ sound-dai = <&aic>;
+ };
+
+ dai_codec: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+ };
+
+ rumble {
+ compatible = "pwm-vibrator";
+ pwms = <&pwm 4 2000000 0>;
+ pwm-names = "enable";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_pwm4>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 1 40000 0>;
+ power-supply = <&vcc>;
+
+ brightness-levels = <0 16 32 48 64 80 96 112 128
+ 144 160 176 192 208 224 240 255>;
+ default-brightness-level = <12>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_pwm1>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ autorepeat;
+
+ button@0 {
+ label = "D-pad up";
+ linux,code = <KEY_UP>;
+ linux,can-disable;
+ gpios = <&gpe 21 GPIO_ACTIVE_LOW>;
+ };
+
+ button@1 {
+ label = "D-pad down";
+ linux,code = <KEY_DOWN>;
+ linux,can-disable;
+ gpios = <&gpe 25 GPIO_ACTIVE_LOW>;
+ };
+
+ button@2 {
+ label = "D-pad left";
+ linux,code = <KEY_LEFT>;
+ linux,can-disable;
+ gpios = <&gpe 23 GPIO_ACTIVE_LOW>;
+ };
+
+ button@3 {
+ label = "D-pad right";
+ linux,code = <KEY_RIGHT>;
+ linux,can-disable;
+ gpios = <&gpe 24 GPIO_ACTIVE_LOW>;
+ };
+
+ button@4 {
+ label = "Button A";
+ linux,code = <KEY_LEFTCTRL>;
+ linux,can-disable;
+ gpios = <&gpe 29 GPIO_ACTIVE_LOW>;
+ };
+
+ button@5 {
+ label = "Button B";
+ linux,code = <KEY_LEFTALT>;
+ linux,can-disable;
+ gpios = <&gpe 20 GPIO_ACTIVE_LOW>;
+ };
+
+ button@6 {
+ label = "Button Y";
+ linux,code = <KEY_SPACE>;
+ linux,can-disable;
+ gpios = <&gpe 27 GPIO_ACTIVE_LOW>;
+ };
+
+ button@7 {
+ label = "Button X";
+ linux,code = <KEY_LEFTSHIFT>;
+ linux,can-disable;
+ gpios = <&gpe 28 GPIO_ACTIVE_LOW>;
+ };
+
+ button@8 {
+ label = "Left shoulder button";
+ linux,code = <KEY_TAB>;
+ linux,can-disable;
+ gpios = <&gpb 20 GPIO_ACTIVE_LOW>;
+ };
+
+ button@9 {
+ label = "Right shoulder button";
+ linux,code = <KEY_BACKSPACE>;
+ linux,can-disable;
+ gpios = <&gpe 26 GPIO_ACTIVE_LOW>;
+ };
+
+ button@10 {
+ label = "Start button";
+ linux,code = <KEY_ENTER>;
+ linux,can-disable;
+ gpios = <&gpb 21 GPIO_ACTIVE_LOW>;
+ };
+
+ button@11 {
+ label = "Select button";
+ linux,code = <KEY_ESC>;
+ linux,can-disable;
+ /*
+ * This is the only button that is active high,
+ * since it doubles as BOOT_SEL1.
+ */
+ gpios = <&gpd 18 GPIO_ACTIVE_HIGH>;
+ };
+
+ button@12 {
+ label = "Power slider";
+ linux,code = <KEY_POWER>;
+ linux,can-disable;
+ gpios = <&gpa 30 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ button@13 {
+ label = "Power hold";
+ linux,code = <KEY_PAUSE>;
+ linux,can-disable;
+ gpios = <&gpf 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ i2c3: i2c-controller@3 {
+ compatible = "i2c-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sda-gpios = <&gpd 5 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpd 4 GPIO_ACTIVE_HIGH>;
+ i2c-gpio,delay-us = <2>; /* 250 kHz */
+
+ act8600: pmic@5a {
+ compatible = "active-semi,act8600";
+ reg = <0x5a>;
+
+ regulators {
+ /* USB OTG */
+ otg_vbus: SUDCDC_REG4 {
+ /*
+ * 5.3V instead of 5.0V to compensate
+ * for the voltage drop of a diode
+ * between the regulator and the
+ * connector.
+ */
+ regulator-min-microvolt = <5300000>;
+ regulator-max-microvolt = <5300000>;
+ inl-supply = <&vcc>;
+ };
+
+ /*
+ * When this is off, there is no sound, but also
+ * no USB networking.
+ */
+ ldo5: LDO5 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ inl-supply = <&vcc>;
+ };
+
+ /* LCD panel and FM radio */
+ ldo6: LDO6 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ inl-supply = <&vcc>;
+ };
+
+ /* ??? */
+ LDO7 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ /*regulator-always-on;*/
+ inl-supply = <&vcc>;
+ };
+
+ /*
+ * The colors on the LCD are wrong when this is
+ * off. Which is strange, since the LCD panel
+ * data sheet only mentions a 3.3V input.
+ */
+ LDO8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ inl-supply = <&vcc>;
+ };
+
+ /* RTC fixed 3.3V */
+ LDO_REG9 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ inl-supply = <&vcc>;
+ };
+
+ /* Unused fixed 1.2V */
+ LDO_REG10 {
+ inl-supply = <&vcc>;
+ };
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led {
+ gpios = <&gpb 30 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+
+ spi {
+ compatible = "spi-gpio";
#address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpe 15 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpe 17 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpe 16 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+
+ nt39016@0 {
+ compatible = "kingdisplay,kd035g6-54nt";
+ reg = <0>;
+
+ spi-max-frequency = <3125000>;
+ spi-3wire;
+ spi-cs-high;
- otg_phy: otg-phy {
- compatible = "usb-nop-xceiv";
- clocks = <&cgu JZ4770_CLK_OTG_PHY>;
- clock-names = "main_clk";
+ reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+ backlight = <&backlight>;
+ power-supply = <&ldo6>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+ };
+
+ connector {
+ compatible = "gpio-usb-b-connector", "usb-b-connector";
+ label = "mini-USB";
+ type = "mini";
+
+ /*
+ * USB OTG is not yet working reliably, the ID detection
+ * mechanism tends to fry easily for unknown reasons.
+ * Until this is fixed, disable OTG by not providing the
+ * ID GPIO to the driver.
+ */
+ //id-gpios = <&gpf 18 GPIO_ACTIVE_LOW>;
+
+ vbus-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&otg_vbus>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_otg>;
+
+ port {
+ usb_ep: endpoint {
+ remote-endpoint = <&usb_otg_ep>;
+ };
};
};
};
@@ -37,24 +391,86 @@
clock-frequency = <12000000>;
};
+&pinctrl {
+ pins_lcd: lcd {
+ function = "lcd";
+ groups = "lcd-24bit";
+ };
+
+ pins_uart2: uart2 {
+ function = "uart2";
+ groups = "uart2-data";
+ };
+
+ pins_mmc0: mmc0 {
+ function = "mmc0";
+ groups = "mmc0-1bit-a", "mmc0-4bit-a";
+ };
+
+ pins_mmc1: mmc1 {
+ function = "mmc1";
+ groups = "mmc1-1bit-d", "mmc1-4bit-d";
+ };
+
+ pins_otg: otg {
+ otg-vbus-pin {
+ function = "otg";
+ groups = "otg-vbus";
+ };
+
+ vbus-pin {
+ pins = "PB5";
+ bias-disable;
+ };
+ };
+
+ pins_pwm1: pwm1 {
+ function = "pwm1";
+ groups = "pwm1";
+ };
+
+ pins_pwm4: pwm4 {
+ function = "pwm4";
+ groups = "pwm4";
+ };
+};
+
&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart2>;
+
status = "okay";
};
&cgu {
- /* Put high-speed peripherals under PLL1, such that we can change the
+ /*
+ * Put high-speed peripherals under PLL1, such that we can change the
* PLL0 frequency on demand without having to suspend peripherals.
* We use a rate of 432 MHz, which is the least common multiple of
* 27 MHz (required by TV encoder) and 48 MHz (required by USB host).
+ * Put the GPU under PLL0 since we want a higher frequency.
+ * Use the 32 kHz oscillator as the parent of the RTC for a higher
+ * precision.
*/
assigned-clocks =
<&cgu JZ4770_CLK_PLL1>,
- <&cgu JZ4770_CLK_UHC>;
+ <&cgu JZ4770_CLK_GPU>,
+ <&cgu JZ4770_CLK_RTC>,
+ <&cgu JZ4770_CLK_UHC>,
+ <&cgu JZ4770_CLK_LPCLK_MUX>,
+ <&cgu JZ4770_CLK_MMC0_MUX>,
+ <&cgu JZ4770_CLK_MMC1_MUX>;
assigned-clock-parents =
<0>,
+ <&cgu JZ4770_CLK_PLL0>,
+ <&cgu JZ4770_CLK_OSC32K>,
+ <&cgu JZ4770_CLK_PLL1>,
+ <&cgu JZ4770_CLK_PLL1>,
+ <&cgu JZ4770_CLK_PLL1>,
<&cgu JZ4770_CLK_PLL1>;
assigned-clock-rates =
- <432000000>;
+ <432000000>,
+ <600000000>;
};
&uhc {
@@ -63,10 +479,69 @@
};
&tcu {
- /* 750 kHz for the system timer and clocksource */
- assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>;
- assigned-clock-rates = <750000>, <750000>;
+ /*
+ * 750 kHz for the system timer and clocksource, 12 MHz for the OST,
+ * and use RTC as the parent for the watchdog clock
+ */
+ assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>,
+ <&tcu TCU_CLK_OST>, <&tcu TCU_CLK_WDT>;
+ assigned-clock-parents = <0>, <0>, <0>, <&cgu JZ4770_CLK_RTC>;
+ assigned-clock-rates = <750000>, <750000>, <12000000>;
- /* PWM1 is in use, so reserve channel #2 for the clocksource */
+ /* PWM1 is in use, so use channel #2 for the clocksource */
ingenic,pwm-channels-mask = <0xfa>;
};
+
+&usb_otg {
+ port {
+ usb_otg_ep: endpoint {
+ remote-endpoint = <&usb_ep>;
+ };
+ };
+};
+
+&otg_phy {
+ vcc-supply = <&ldo5>;
+};
+
+&rtc {
+ clocks = <&cgu JZ4770_CLK_RTC>;
+ clock-names = "rtc";
+
+ system-power-controller;
+};
+
+&mmc0 {
+ status = "okay";
+
+ bus-width = <4>;
+ max-frequency = <48000000>;
+ vmmc-supply = <&vcc>;
+ non-removable;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mmc0>;
+};
+
+&mmc1 {
+ status = "okay";
+
+ bus-width = <4>;
+ max-frequency = <48000000>;
+ cd-gpios = <&gpb 2 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&mmc1_power>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mmc1>;
+};
+
+&lcd {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_lcd>;
+
+ port {
+ panel_output: endpoint {
+ remote-endpoint = <&panel_input>;
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/ingenic/gcw0_proto.dts b/arch/mips/boot/dts/ingenic/gcw0_proto.dts
new file mode 100644
index 000000000000..02df22f8ae0f
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/gcw0_proto.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "gcw0.dts"
+
+/ {
+ model = "GCW Zero Prototype";
+};
+
+&memory {
+ /* Prototype has only 256 MiB of RAM */
+ reg = <0x0 0x10000000>;
+};
diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
index a3301bab9231..1520585c235c 100644
--- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
@@ -55,10 +55,10 @@
#clock-cells = <1>;
- clocks = <&cgu JZ4740_CLK_RTC
- &cgu JZ4740_CLK_EXT
- &cgu JZ4740_CLK_PCLK
- &cgu JZ4740_CLK_TCU>;
+ clocks = <&cgu JZ4740_CLK_RTC>,
+ <&cgu JZ4740_CLK_EXT>,
+ <&cgu JZ4740_CLK_PCLK>,
+ <&cgu JZ4740_CLK_TCU>;
clock-names = "rtc", "ext", "pclk", "tcu";
interrupt-controller;
@@ -74,6 +74,20 @@
clocks = <&tcu TCU_CLK_WDT>;
clock-names = "wdt";
};
+
+ pwm: pwm@40 {
+ compatible = "ingenic,jz4740-pwm";
+ reg = <0x40 0x80>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+ <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
+ <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
+ clock-names = "timer0", "timer1", "timer2", "timer3",
+ "timer4", "timer5", "timer6", "timer7";
+ };
};
rtc_dev: rtc@10003000 {
@@ -241,10 +255,10 @@
reg = <0x13010000 0x54>;
#address-cells = <2>;
#size-cells = <1>;
- ranges = <1 0 0x18000000 0x4000000
- 2 0 0x14000000 0x4000000
- 3 0 0x0c000000 0x4000000
- 4 0 0x08000000 0x4000000>;
+ ranges = <1 0 0x18000000 0x4000000>,
+ <2 0 0x14000000 0x4000000>,
+ <3 0 0x0c000000 0x4000000>,
+ <4 0 0x08000000 0x4000000>;
clocks = <&cgu JZ4740_CLK_MCLK>;
};
@@ -258,8 +272,7 @@
dmac: dma-controller@13020000 {
compatible = "ingenic,jz4740-dma";
- reg = <0x13020000 0xbc
- 0x13020300 0x14>;
+ reg = <0x13020000 0xbc>, <0x13020300 0x14>;
#dma-cells = <2>;
interrupt-parent = <&intc>;
diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
index 0bfb9edff3d0..fa11ac950499 100644
--- a/arch/mips/boot/dts/ingenic/jz4770.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/clock/jz4770-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
/ {
#address-cells = <1>;
@@ -37,13 +38,25 @@
};
cgu: jz4770-cgu@10000000 {
- compatible = "ingenic,jz4770-cgu";
+ compatible = "ingenic,jz4770-cgu", "simple-mfd";
reg = <0x10000000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10000000 0x100>;
clocks = <&ext>, <&osc32k>;
clock-names = "ext", "osc32k";
#clock-cells = <1>;
+
+ otg_phy: usb-phy@3c {
+ compatible = "ingenic,jz4770-phy";
+ reg = <0x3c 0x10>;
+
+ clocks = <&cgu JZ4770_CLK_OTG_PHY>;
+
+ #phy-cells = <0>;
+ };
};
tcu: timer@10002000 {
@@ -55,9 +68,9 @@
#clock-cells = <1>;
- clocks = <&cgu JZ4770_CLK_RTC
- &cgu JZ4770_CLK_EXT
- &cgu JZ4770_CLK_PCLK>;
+ clocks = <&cgu JZ4770_CLK_RTC>,
+ <&cgu JZ4770_CLK_EXT>,
+ <&cgu JZ4770_CLK_PCLK>;
clock-names = "rtc", "ext", "pclk";
interrupt-controller;
@@ -65,6 +78,47 @@
interrupt-parent = <&intc>;
interrupts = <27 26 25>;
+
+ watchdog: watchdog@0 {
+ compatible = "ingenic,jz4770-watchdog",
+ "ingenic,jz4740-watchdog";
+ reg = <0x0 0xc>;
+
+ clocks = <&tcu TCU_CLK_WDT>;
+ clock-names = "wdt";
+ };
+
+ pwm: pwm@40 {
+ compatible = "ingenic,jz4770-pwm", "ingenic,jz4740-pwm";
+ reg = <0x40 0x80>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+ <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
+ <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
+ clock-names = "timer0", "timer1", "timer2", "timer3",
+ "timer4", "timer5", "timer6", "timer7";
+ };
+
+ ost: timer@e0 {
+ compatible = "ingenic,jz4770-ost";
+ reg = <0xe0 0x20>;
+
+ clocks = <&tcu TCU_CLK_OST>;
+ clock-names = "ost";
+
+ interrupts = <15>;
+ };
+ };
+
+ rtc: rtc@10003000 {
+ compatible = "ingenic,jz4770-rtc", "ingenic,jz4760-rtc";
+ reg = <0x10003000 0x40>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <32>;
};
pinctrl: pin-controller@10010000 {
@@ -165,6 +219,93 @@
};
};
+ aic: audio-controller@10020000 {
+ compatible = "ingenic,jz4770-i2s";
+ reg = <0x10020000 0x94>;
+
+ #sound-dai-cells = <0>;
+
+ clocks = <&cgu JZ4770_CLK_AIC>, <&cgu JZ4770_CLK_I2S>,
+ <&cgu JZ4770_CLK_EXT>, <&cgu JZ4770_CLK_PLL0>;
+ clock-names = "aic", "i2s", "ext", "pll half";
+
+ interrupt-parent = <&intc>;
+ interrupts = <34>;
+
+ dmas = <&dmac0 25 0xffffffff>, <&dmac0 24 0xffffffff>;
+ dma-names = "rx", "tx";
+ };
+
+ codec: audio-codec@100200a0 {
+ compatible = "ingenic,jz4770-codec";
+ reg = <0x100200a4 0x8>;
+
+ #sound-dai-cells = <0>;
+
+ clocks = <&cgu JZ4770_CLK_AIC>;
+ clock-names = "aic";
+ };
+
+ mmc0: mmc@10021000 {
+ compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+ reg = <0x10021000 0x1000>;
+
+ clocks = <&cgu JZ4770_CLK_MMC0>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <37>;
+
+ dmas = <&dmac1 27 0xffffffff>, <&dmac1 26 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ status = "disabled";
+ };
+
+ mmc1: mmc@10022000 {
+ compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+ reg = <0x10022000 0x1000>;
+
+ clocks = <&cgu JZ4770_CLK_MMC1>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <36>;
+
+ dmas = <&dmac1 31 0xffffffff>, <&dmac1 30 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ status = "disabled";
+ };
+
+ mmc2: mmc@10023000 {
+ compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+ reg = <0x10023000 0x1000>;
+
+ clocks = <&cgu JZ4770_CLK_MMC2>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <35>;
+
+ dmas = <&dmac1 37 0xffffffff>, <&dmac1 36 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ status = "disabled";
+ };
+
uart0: serial@10030000 {
compatible = "ingenic,jz4770-uart";
reg = <0x10030000 0x100>;
@@ -217,34 +358,63 @@
status = "disabled";
};
+ adc: adc@10070000 {
+ compatible = "ingenic,jz4770-adc";
+ reg = <0x10070000 0x30>;
+
+ #io-channel-cells = <1>;
+
+ clocks = <&cgu JZ4770_CLK_ADC>;
+ clock-names = "adc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <18>;
+ };
+
+ gpu: gpu@13040000 {
+ compatible = "vivante,gc";
+ reg = <0x13040000 0x10000>;
+
+ clocks = <&cgu JZ4770_CLK_GPU>,
+ <&cgu JZ4770_CLK_GPU>,
+ <&cgu JZ4770_CLK_GPU>;
+ clock-names = "bus", "core", "shader";
+
+ interrupt-parent = <&intc>;
+ interrupts = <6>;
+ };
+
+ lcd: lcd-controller@13050000 {
+ compatible = "ingenic,jz4770-lcd";
+ reg = <0x13050000 0x300>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <31>;
+
+ clocks = <&cgu JZ4770_CLK_LPCLK_MUX>;
+ clock-names = "lcd_pclk";
+ };
+
dmac0: dma-controller@13420000 {
compatible = "ingenic,jz4770-dma";
- reg = <0x13420000 0xC0
- 0x13420300 0x20>;
+ reg = <0x13420000 0xC0>, <0x13420300 0x20>;
- #dma-cells = <1>;
+ #dma-cells = <2>;
clocks = <&cgu JZ4770_CLK_DMA>;
interrupt-parent = <&intc>;
interrupts = <24>;
-
- /* Disable dmac0 until we have something that uses it */
- status = "disabled";
};
dmac1: dma-controller@13420100 {
compatible = "ingenic,jz4770-dma";
- reg = <0x13420100 0xC0
- 0x13420400 0x20>;
+ reg = <0x13420100 0xC0>, <0x13420400 0x20>;
- #dma-cells = <1>;
+ #dma-cells = <2>;
clocks = <&cgu JZ4770_CLK_DMA>;
interrupt-parent = <&intc>;
interrupts = <23>;
-
- /* Disable dmac1 until we have something that uses it */
- status = "disabled";
};
uhc: uhc@13430000 {
@@ -260,4 +430,29 @@
status = "disabled";
};
+
+ usb_otg: usb@13440000 {
+ compatible = "ingenic,jz4770-musb";
+ reg = <0x13440000 0x10000>;
+
+ clocks = <&cgu JZ4770_CLK_OTG>;
+ clock-names = "udc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <21>;
+ interrupt-names = "mc";
+
+ phys = <&otg_phy>;
+
+ usb-role-switch;
+ };
+
+ rom: memory@1fc00000 {
+ compatible = "mtd-rom";
+ probe-type = "map_rom";
+ reg = <0x1fc00000 0x2000>;
+
+ bank-width = <4>;
+ device-width = <1>;
+ };
};
diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index bb89653d16a3..b7f409a7cf5d 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -58,9 +58,9 @@
#clock-cells = <1>;
- clocks = <&cgu JZ4780_CLK_RTCLK
- &cgu JZ4780_CLK_EXCLK
- &cgu JZ4780_CLK_PCLK>;
+ clocks = <&cgu JZ4780_CLK_RTCLK>,
+ <&cgu JZ4780_CLK_EXCLK>,
+ <&cgu JZ4780_CLK_PCLK>;
clock-names = "rtc", "ext", "pclk";
interrupt-controller;
@@ -76,6 +76,30 @@
clocks = <&tcu TCU_CLK_WDT>;
clock-names = "wdt";
};
+
+ pwm: pwm@40 {
+ compatible = "ingenic,jz4780-pwm", "ingenic,jz4740-pwm";
+ reg = <0x40 0x80>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+ <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
+ <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
+ clock-names = "timer0", "timer1", "timer2", "timer3",
+ "timer4", "timer5", "timer6", "timer7";
+ };
+
+ ost: timer@e0 {
+ compatible = "ingenic,jz4780-ost", "ingenic,jz4770-ost";
+ reg = <0xe0 0x20>;
+
+ clocks = <&tcu TCU_CLK_OST>;
+ clock-names = "ost";
+
+ interrupts = <15>;
+ };
};
rtc_dev: rtc@10003000 {
@@ -196,8 +220,7 @@
gpio-miso = <&gpe 14 0>;
gpio-sck = <&gpe 15 0>;
gpio-mosi = <&gpe 17 0>;
- cs-gpios = <&gpe 16 0
- &gpe 18 0>;
+ cs-gpios = <&gpe 16 0>, <&gpe 18 0>;
spidev@0 {
compatible = "spidev";
@@ -358,26 +381,40 @@
};
nemc: nemc@13410000 {
- compatible = "ingenic,jz4780-nemc";
+ compatible = "ingenic,jz4780-nemc", "simple-mfd";
reg = <0x13410000 0x10000>;
#address-cells = <2>;
#size-cells = <1>;
- ranges = <1 0 0x1b000000 0x1000000
- 2 0 0x1a000000 0x1000000
- 3 0 0x19000000 0x1000000
- 4 0 0x18000000 0x1000000
- 5 0 0x17000000 0x1000000
- 6 0 0x16000000 0x1000000>;
+ ranges = <0 0 0x13410000 0x10000>,
+ <1 0 0x1b000000 0x1000000>,
+ <2 0 0x1a000000 0x1000000>,
+ <3 0 0x19000000 0x1000000>,
+ <4 0 0x18000000 0x1000000>,
+ <5 0 0x17000000 0x1000000>,
+ <6 0 0x16000000 0x1000000>;
clocks = <&cgu JZ4780_CLK_NEMC>;
status = "disabled";
+
+ efuse: efuse@d0 {
+ reg = <0 0xd0 0x30>;
+ compatible = "ingenic,jz4780-efuse";
+
+ clocks = <&cgu JZ4780_CLK_AHB2>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eth0_addr: eth-mac-addr@0x22 {
+ reg = <0x22 0x6>;
+ };
+ };
};
dma: dma@13420000 {
compatible = "ingenic,jz4780-dma";
- reg = <0x13420000 0x400
- 0x13421000 0x40>;
+ reg = <0x13420000 0x400>, <0x13421000 0x40>;
#dma-cells = <2>;
interrupt-parent = <&intc>;
diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi
index 147f7d5c243a..59a63a0985a8 100644
--- a/arch/mips/boot/dts/ingenic/x1000.dtsi
+++ b/arch/mips/boot/dts/ingenic/x1000.dtsi
@@ -58,9 +58,9 @@
#clock-cells = <1>;
- clocks = <&cgu X1000_CLK_RTCLK
- &cgu X1000_CLK_EXCLK
- &cgu X1000_CLK_PCLK>;
+ clocks = <&cgu X1000_CLK_RTCLK>,
+ <&cgu X1000_CLK_EXCLK>,
+ <&cgu X1000_CLK_PCLK>;
clock-names = "rtc", "ext", "pclk";
interrupt-controller;
@@ -239,8 +239,7 @@
pdma: dma-controller@13420000 {
compatible = "ingenic,x1000-dma";
- reg = <0x13420000 0x400
- 0x13421000 0x40>;
+ reg = <0x13420000 0x400>, <0x13421000 0x40>;
#dma-cells = <2>;
interrupt-parent = <&intc>;
diff --git a/arch/mips/boot/dts/loongson/rs780e-pch.dtsi b/arch/mips/boot/dts/loongson/rs780e-pch.dtsi
index 45c54d555fa4..d0d5d60a8697 100644
--- a/arch/mips/boot/dts/loongson/rs780e-pch.dtsi
+++ b/arch/mips/boot/dts/loongson/rs780e-pch.dtsi
@@ -9,6 +9,18 @@
0 0x40000000 0 0x40000000 0 0x40000000
0xfd 0xfe000000 0xfd 0xfe000000 0 0x2000000 /* PCI Config Space */>;
+ pci@1a000000 {
+ compatible = "loongson,rs780e-pci";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ reg = <0 0x1a000000 0 0x02000000>;
+
+ ranges = <0x01000000 0 0x00004000 0 0x18004000 0 0x00004000>,
+ <0x02000000 0 0x40000000 0 0x40000000 0 0x40000000>;
+ };
+
isa {
compatible = "isa";
#address-cells = <2>;
@@ -21,6 +33,11 @@
interrupts = <8>;
interrupt-parent = <&htpic>;
};
+
+ acpi@800 {
+ compatible = "loongson,rs780e-acpi";
+ reg = <1 0x800 0x100>;
+ };
};
};
};
diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi
index 797d336db54d..f94e8a02ed06 100644
--- a/arch/mips/boot/dts/mscc/ocelot.dtsi
+++ b/arch/mips/boot/dts/mscc/ocelot.dtsi
@@ -214,7 +214,7 @@
miim1: miim1 {
pins = "GPIO_14", "GPIO_15";
- function = "miim1";
+ function = "miim";
};
};
diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi
index 8f5aed760abb..83b3c0ce135a 100644
--- a/arch/mips/boot/dts/qca/ar9331.dtsi
+++ b/arch/mips/boot/dts/qca/ar9331.dtsi
@@ -59,7 +59,7 @@
#qca,ddr-wb-channel-cells = <1>;
};
- uart: uart@18020000 {
+ uart: serial@18020000 {
compatible = "qca,ar9330-uart";
reg = <0x18020000 0x14>;
diff --git a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
index 0f2b20044834..7695d326df11 100644
--- a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
+++ b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
@@ -3,6 +3,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include "ar9331.dtsi"
@@ -22,8 +23,9 @@
leds {
compatible = "gpio-leds";
- system {
- label = "dpt-module:green:system";
+ led-0 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
default-state = "off";
};
diff --git a/arch/mips/cavium-octeon/Platform b/arch/mips/cavium-octeon/Platform
index 45be853700e6..4adef38dea9d 100644
--- a/arch/mips/cavium-octeon/Platform
+++ b/arch/mips/cavium-octeon/Platform
@@ -1,7 +1,6 @@
#
# Cavium Octeon
#
-platform-$(CONFIG_CAVIUM_OCTEON_SOC) += cavium-octeon/
cflags-$(CONFIG_CAVIUM_OCTEON_SOC) += \
-I$(srctree)/arch/mips/include/asm/mach-cavium-octeon
load-$(CONFIG_CAVIUM_OCTEON_SOC) += 0xffffffff81100000
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-npi.c b/arch/mips/cavium-octeon/executive/cvmx-helper-npi.c
index cc94cfa545b4..cb210d2ef0c4 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-helper-npi.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-npi.c
@@ -59,18 +59,6 @@ int __cvmx_helper_npi_probe(int interface)
&& !OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X))
/* The packet engines didn't exist before pass 2 */
return 4;
-#if 0
- /*
- * Technically CN30XX, CN31XX, and CN50XX contain packet
- * engines, but nobody ever uses them. Since this is the case,
- * we disable them here.
- */
- else if (OCTEON_IS_MODEL(OCTEON_CN31XX)
- || OCTEON_IS_MODEL(OCTEON_CN50XX))
- return 2;
- else if (OCTEON_IS_MODEL(OCTEON_CN30XX))
- return 1;
-#endif
#endif
return 0;
}
diff --git a/arch/mips/cavium-octeon/executive/cvmx-pko.c b/arch/mips/cavium-octeon/executive/cvmx-pko.c
index b077597c668a..b0efc35e95c4 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-pko.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-pko.c
@@ -489,7 +489,7 @@ cvmx_pko_status_t cvmx_pko_config_port(uint64_t port, uint64_t base_queue,
config.s.qos_mask = 0xff;
break;
}
- /* fall through - to the error case, when Pass 1 */
+ fallthrough; /* to the error case, when Pass 1 */
default:
cvmx_dprintf("ERROR: cvmx_pko_config_port: Invalid "
"priority %llu\n",
diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
index 51685f893eab..d56e9b9d2e43 100644
--- a/arch/mips/cavium-octeon/octeon-platform.c
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -141,7 +141,7 @@ static void octeon2_usb_clocks_start(struct device *dev)
default:
pr_err("Invalid UCTL clock rate of %u, using 12000000 instead\n",
clock_rate);
- /* Fall through */
+ fallthrough;
case 12000000:
clk_rst_ctl.s.p_refclk_div = 0;
break;
@@ -1116,7 +1116,7 @@ end_led:
new_f[0] = cpu_to_be32(48000000);
fdt_setprop_inplace(initial_boot_params, usbn,
"refclk-frequency", new_f, sizeof(new_f));
- /* Fall through ...*/
+ fallthrough;
case USB_CLOCK_TYPE_REF_12:
/* Missing "refclk-type" defaults to external. */
fdt_nop_property(initial_boot_params, usbn, "refclk-type");
diff --git a/arch/mips/cavium-octeon/octeon-usb.c b/arch/mips/cavium-octeon/octeon-usb.c
index cc88a08bc1f7..1fd85c559700 100644
--- a/arch/mips/cavium-octeon/octeon-usb.c
+++ b/arch/mips/cavium-octeon/octeon-usb.c
@@ -398,7 +398,7 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base)
default:
dev_err(dev, "Invalid ref_clk %u, using 100000000 instead\n",
clock_rate);
- /* fall through */
+ fallthrough;
case 100000000:
mpll_mul = 0x19;
if (ref_clk_sel < 2)
diff --git a/arch/mips/cobalt/Platform b/arch/mips/cobalt/Platform
index 34123efd6dfe..4254895ad6f4 100644
--- a/arch/mips/cobalt/Platform
+++ b/arch/mips/cobalt/Platform
@@ -1,6 +1,5 @@
#
# Cobalt Server
#
-platform-$(CONFIG_MIPS_COBALT) += cobalt/
cflags-$(CONFIG_MIPS_COBALT) += -I$(srctree)/arch/mips/include/asm/mach-cobalt
load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000
diff --git a/arch/mips/configs/ath79_defconfig b/arch/mips/configs/ath79_defconfig
index 3d14d67dc746..96622a2ad333 100644
--- a/arch/mips/configs/ath79_defconfig
+++ b/arch/mips/configs/ath79_defconfig
@@ -46,7 +46,6 @@ CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_M25P80=y
CONFIG_MTD_SPI_NOR=y
CONFIG_NETDEVICES=y
CONFIG_ATH9K=m
diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig
index 0db0088bbc1c..e511fe0243a5 100644
--- a/arch/mips/configs/ci20_defconfig
+++ b/arch/mips/configs/ci20_defconfig
@@ -1,5 +1,4 @@
# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_MODULES=y
CONFIG_KERNEL_XZ=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@@ -29,6 +28,7 @@ CONFIG_HIGHMEM=y
CONFIG_HZ_100=y
# CONFIG_SECCOMP is not set
# CONFIG_SUSPEND is not set
+CONFIG_MODULES=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_COMPACTION is not set
CONFIG_CMA=y
@@ -38,17 +38,12 @@ CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
# CONFIG_FW_LOADER is not set
# CONFIG_ALLOW_DEV_COREDUMP is not set
-CONFIG_DMA_CMA=y
-CONFIG_CMA_SIZE_MBYTES=32
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_JZ4780=y
@@ -72,9 +67,8 @@ CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_WLAN is not set
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_KEYBOARD_GPIO=m
# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_LEGACY_PTY_COUNT=2
CONFIG_SERIAL_8250=y
@@ -89,7 +83,7 @@ CONFIG_I2C_JZ4780=y
CONFIG_SPI=y
CONFIG_SPI_GPIO=y
CONFIG_GPIO_SYSFS=y
-CONFIG_KEYBOARD_GPIO=m
+CONFIG_POWER_SUPPLY=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_JZ4740_WDT=y
@@ -97,17 +91,45 @@ CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_ACT8865=y
+CONFIG_RC_CORE=m
+CONFIG_LIRC=y
+CONFIG_RC_DEVICES=y
+CONFIG_IR_GPIO_CIR=m
+CONFIG_IR_GPIO_TX=m
+CONFIG_MEDIA_SUPPORT=m
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_JZ4740=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_MTD=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_ACTIVITY=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_TRANSIENT=y
+CONFIG_LEDS_TRIGGER_CAMERA=m
+CONFIG_LEDS_TRIGGER_PANIC=y
+CONFIG_LEDS_TRIGGER_NETDEV=y
+CONFIG_LEDS_TRIGGER_PATTERN=y
+CONFIG_LEDS_TRIGGER_AUDIO=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_JZ4740=y
CONFIG_DMADEVICES=y
CONFIG_DMA_JZ4780=y
+CONFIG_INGENIC_OST=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_MEMORY=y
+CONFIG_PWM=y
+CONFIG_PWM_JZ4740=m
CONFIG_EXT4_FS=y
# CONFIG_DNOTIFY is not set
CONFIG_PROC_KCORE=y
@@ -156,11 +178,13 @@ CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=32
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_TIMEOUT=10
# CONFIG_SCHED_DEBUG is not set
@@ -169,21 +193,3 @@ CONFIG_STACKTRACE=y
# CONFIG_FTRACE is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon console=ttyS4,115200 clk_ignore_unused"
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_MTD=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_LEDS_TRIGGER_TRANSIENT=y
-CONFIG_LEDS_TRIGGER_CAMERA=m
-CONFIG_LIRC=y
-CONFIG_MEDIA_SUPPORT=m
-CONFIG_RC_DEVICES=y
-CONFIG_IR_GPIO_CIR=m
-CONFIG_IR_GPIO_TX=m
diff --git a/arch/mips/configs/db1xxx_defconfig b/arch/mips/configs/db1xxx_defconfig
index e6f3e8e3da39..b8bd66300996 100644
--- a/arch/mips/configs/db1xxx_defconfig
+++ b/arch/mips/configs/db1xxx_defconfig
@@ -92,7 +92,6 @@ CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_M25P80=y
CONFIG_MTD_SST25L=y
CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_ECC_SW_BCH=y
diff --git a/arch/mips/configs/gcw0_defconfig b/arch/mips/configs/gcw0_defconfig
index a3e3eb3c5a8b..48131cb47e66 100644
--- a/arch/mips/configs/gcw0_defconfig
+++ b/arch/mips/configs/gcw0_defconfig
@@ -1,27 +1,152 @@
+CONFIG_DEFAULT_HOSTNAME="gcw0"
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_EMBEDDED=y
+CONFIG_PROFILING=y
CONFIG_MACH_INGENIC=y
CONFIG_JZ4770_GCW0=y
CONFIG_HIGHMEM=y
# CONFIG_SECCOMP is not set
-# CONFIG_SUSPEND is not set
+CONFIG_MIPS_RAW_APPENDED_DTB=y
+CONFIG_MIPS_CMDLINE_DTB_EXTEND=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BOUNCE is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
+CONFIG_CFG80211=y
+CONFIG_MAC80211=m
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
CONFIG_NETDEVICES=y
+# CONFIG_ETHERNET is not set
+# CONFIG_WLAN_VENDOR_ADMTEK is not set
+# CONFIG_WLAN_VENDOR_ATH is not set
+# CONFIG_WLAN_VENDOR_ATMEL is not set
+# CONFIG_WLAN_VENDOR_BROADCOM is not set
+# CONFIG_WLAN_VENDOR_CISCO is not set
+# CONFIG_WLAN_VENDOR_INTEL is not set
+# CONFIG_WLAN_VENDOR_INTERSIL is not set
+# CONFIG_WLAN_VENDOR_MARVELL is not set
+# CONFIG_WLAN_VENDOR_MEDIATEK is not set
+# CONFIG_WLAN_VENDOR_RALINK is not set
+CONFIG_RTL8192CU=m
+# CONFIG_RTLWIFI_DEBUG is not set
+# CONFIG_WLAN_VENDOR_RSI is not set
+# CONFIG_WLAN_VENDOR_ST is not set
+# CONFIG_WLAN_VENDOR_TI is not set
+# CONFIG_WLAN_VENDOR_ZYDAS is not set
+# CONFIG_WLAN_VENDOR_QUANTENNA is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=y
+CONFIG_INPUT_PWM_VIBRA=y
+# CONFIG_SERIO is not set
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_INGENIC=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=y
+CONFIG_POWER_SUPPLY=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_JZ4740_WDT=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_ACT8865=y
+CONFIG_DRM=y
+CONFIG_DRM_FBDEV_OVERALLOC=300
+CONFIG_DRM_PANEL_NOVATEK_NT39016=y
+CONFIG_DRM_INGENIC=y
+CONFIG_DRM_ETNAVIV=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_PROC_FS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_MIPS is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_JZ4740_SOC_I2S=y
+CONFIG_SND_SOC_JZ4770_CODEC=y
+CONFIG_SND_SOC_SIMPLE_AMPLIFIER=y
+CONFIG_SND_SIMPLE_CARD=y
+CONFIG_USB_CONN_GPIO=y
CONFIG_USB=y
+CONFIG_USB_OTG=y
+CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_TMPFS=y
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_MUSB_JZ4740=y
+CONFIG_USB_INVENTRA_DMA=y
+CONFIG_JZ4770_PHY=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_ETH=y
+CONFIG_MMC=y
+# CONFIG_PWRSEQ_EMMC is not set
+# CONFIG_PWRSEQ_SIMPLE is not set
+CONFIG_MMC_JZ4740=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_PANIC=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_NVMEM is not set
+CONFIG_RTC_DRV_JZ4740=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_JZ4780=y
+# CONFIG_VIRTIO_MENU is not set
+CONFIG_STAGING=y
+CONFIG_R8188EU=m
+CONFIG_INGENIC_OST=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_IIO=y
+CONFIG_IIO_BUFFER=y
+CONFIG_IIO_BUFFER_CB=y
+CONFIG_IIO_KFIFO_BUF=y
+CONFIG_MXC6255=m
+CONFIG_INGENIC_ADC=y
+CONFIG_PWM=y
+CONFIG_PWM_JZ4740=y
+CONFIG_EXT4_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_FILE_DIRECT=y
+CONFIG_SQUASHFS_DECOMP_MULTI=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity"
+CONFIG_CRYPTO_ECHAINIV=y
+CONFIG_FONTS=y
+CONFIG_FONT_6x10=y
+CONFIG_DEBUG_FS=y
diff --git a/arch/mips/configs/generic/board-ocelot.config b/arch/mips/configs/generic/board-ocelot.config
index 7626f2a75b03..510709565404 100644
--- a/arch/mips/configs/generic/board-ocelot.config
+++ b/arch/mips/configs/generic/board-ocelot.config
@@ -9,7 +9,6 @@ CONFIG_GENERIC_PHY=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
-CONFIG_MTD_M25P80=y
CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_SPI_NOR=y
diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig
deleted file mode 100644
index 00cf461db971..000000000000
--- a/arch/mips/configs/lasat_defconfig
+++ /dev/null
@@ -1,55 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_LASAT=y
-CONFIG_PICVUE=y
-CONFIG_PICVUE_PROC=y
-CONFIG_DS1603=y
-CONFIG_LASAT_SYSCTL=y
-CONFIG_HZ_1000=y
-# CONFIG_SECCOMP is not set
-CONFIG_PCI=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_CMD64X=y
-CONFIG_ATA_GENERIC=y
-CONFIG_PATA_LEGACY=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO_RAW=y
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_PCI is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig
index 51675f5000d6..3d4c7e9996c5 100644
--- a/arch/mips/configs/loongson3_defconfig
+++ b/arch/mips/configs/loongson3_defconfig
@@ -21,6 +21,7 @@ CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
CONFIG_MACH_LOONGSON64=y
CONFIG_SMP=y
CONFIG_HZ_256=y
@@ -216,6 +217,7 @@ CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_HW_RANDOM=y
CONFIG_RAW_DRIVER=m
CONFIG_I2C_CHARDEV=y
@@ -229,7 +231,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_DRM=y
-CONFIG_DRM_RADEON=y
+CONFIG_DRM_RADEON=m
CONFIG_FB_RADEON=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=m
diff --git a/arch/mips/configs/markeins_defconfig b/arch/mips/configs/markeins_defconfig
deleted file mode 100644
index 507ad91b21e7..000000000000
--- a/arch/mips/configs/markeins_defconfig
+++ /dev/null
@@ -1,185 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_PREEMPT=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_NEC_MARKEINS=y
-CONFIG_HZ_1000=y
-CONFIG_PCI=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_SCSI=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_AIC94XX=m
-# CONFIG_AIC94XX_DEBUG is not set
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_CHELSIO_T3=m
-CONFIG_NATSEMI=y
-CONFIG_QLA3XXX=m
-CONFIG_NETXEN_NIC=m
-CONFIG_PPP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_DEBUG_CORE=y
-CONFIG_I2C_DEBUG_BUS=y
-# CONFIG_HID is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=m
-CONFIG_XFS_FS=m
-# CONFIG_DNOTIFY is not set
-CONFIG_AUTOFS4_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_NLS_DEFAULT=""
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_UTF8=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,115200 mem=192m ip=bootp root=/dev/nfs rw"
diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig
deleted file mode 100644
index 6ad1a2381226..000000000000
--- a/arch/mips/configs/msp71xx_defconfig
+++ /dev/null
@@ -1,77 +0,0 @@
-CONFIG_LOCALVERSION="-pmc"
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_PREEMPT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_PMC_MSP=y
-CONFIG_PMC_MSP7120_GW=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_NR_CPUS=2
-CONFIG_PCI=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_INET_AH=y
-CONFIG_INET_ESP=y
-CONFIG_INET_IPCOMP=y
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_BRIDGE=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_PMC_MSP_EVM=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_PPP=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_PMCMSP=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_STORAGE=y
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_SQUASHFS=y
-CONFIG_SQUASHFS_EMBEDDED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/mips/configs/pistachio_defconfig b/arch/mips/configs/pistachio_defconfig
index 24e07180c57d..b9adf15ebbec 100644
--- a/arch/mips/configs/pistachio_defconfig
+++ b/arch/mips/configs/pistachio_defconfig
@@ -127,7 +127,6 @@ CONFIG_DEBUG_DEVRES=y
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
-CONFIG_MTD_M25P80=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BLOCK=y
diff --git a/arch/mips/configs/rt305x_defconfig b/arch/mips/configs/rt305x_defconfig
index 8c2ead53007a..fec5851c164b 100644
--- a/arch/mips/configs/rt305x_defconfig
+++ b/arch/mips/configs/rt305x_defconfig
@@ -76,7 +76,6 @@ CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_M25P80=y
CONFIG_MTD_SPI_NOR=y
CONFIG_EEPROM_93CX6=m
CONFIG_SCSI=y
diff --git a/arch/mips/dec/Platform b/arch/mips/dec/Platform
index cf55a6f4e720..c82391e832f9 100644
--- a/arch/mips/dec/Platform
+++ b/arch/mips/dec/Platform
@@ -1,7 +1,6 @@
#
# DECstation family
#
-platform-$(CONFIG_MACH_DECSTATION) += dec/
cflags-$(CONFIG_MACH_DECSTATION) += \
-I$(srctree)/arch/mips/include/asm/mach-dec
libs-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/prom/
diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S
index a25ef822e725..ea5b5a83f1e1 100644
--- a/arch/mips/dec/int-handler.S
+++ b/arch/mips/dec/int-handler.S
@@ -304,8 +304,8 @@ spurious:
*/
FEXPORT(dec_intr_unimplemented)
move a1,t0 # cheats way of printing an arg!
- PANIC("Unimplemented cpu interrupt! CP0_CAUSE: 0x%08x");
+ ASM_PANIC("Unimplemented cpu interrupt! CP0_CAUSE: 0x%08x");
FEXPORT(asic_intr_unimplemented)
move a1,t0 # cheats way of printing an arg!
- PANIC("Unimplemented asic interrupt! ASIC ISR: 0x%08x");
+ ASM_PANIC("Unimplemented asic interrupt! ASIC ISR: 0x%08x");
diff --git a/arch/mips/dec/tc.c b/arch/mips/dec/tc.c
index 732027c79834..dba58397668e 100644
--- a/arch/mips/dec/tc.c
+++ b/arch/mips/dec/tc.c
@@ -52,7 +52,7 @@ int __init tc_bus_get_info(struct tc_bus *tbus)
case MACH_DS5900:
tbus->ext_slot_base = 0x20000000;
tbus->ext_slot_size = 0x20000000;
- /* fall through */
+ fallthrough;
case MACH_DS5000_1XX:
tbus->num_tcslots = 3;
break;
diff --git a/arch/mips/emma/Makefile b/arch/mips/emma/Makefile
deleted file mode 100644
index bc03082064ca..000000000000
--- a/arch/mips/emma/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_SOC_EMMA2RH) += common/
-
-#
-# NEC EMMA2RH Mark-eins
-#
-obj-$(CONFIG_NEC_MARKEINS) += markeins/
diff --git a/arch/mips/emma/Platform b/arch/mips/emma/Platform
deleted file mode 100644
index 0282f7f99b88..000000000000
--- a/arch/mips/emma/Platform
+++ /dev/null
@@ -1,4 +0,0 @@
-platform-$(CONFIG_SOC_EMMA2RH) += emma/
-cflags-$(CONFIG_SOC_EMMA2RH) += \
- -I$(srctree)/arch/mips/include/asm/mach-emma2rh
-load-$(CONFIG_NEC_MARKEINS) += 0xffffffff88100000
diff --git a/arch/mips/emma/common/Makefile b/arch/mips/emma/common/Makefile
deleted file mode 100644
index a754abd1beb9..000000000000
--- a/arch/mips/emma/common/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-#
-# Copyright (C) NEC Electronics Corporation 2005-2006
-#
-
-obj-$(CONFIG_NEC_MARKEINS) += prom.o
diff --git a/arch/mips/emma/common/prom.c b/arch/mips/emma/common/prom.c
deleted file mode 100644
index 7c3a6f32beda..000000000000
--- a/arch/mips/emma/common/prom.c
+++ /dev/null
@@ -1,56 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) NEC Electronics Corporation 2004-2006
- *
- * This file is based on the arch/mips/ddb5xxx/common/prom.c
- *
- * Copyright 2001 MontaVista Software Inc.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/memblock.h>
-
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <asm/emma/emma2rh.h>
-
-const char *get_system_type(void)
-{
-#ifdef CONFIG_NEC_MARKEINS
- return "NEC EMMA2RH Mark-eins";
-#else
-#error Unknown NEC board
-#endif
-}
-
-/* [jsun@junsun.net] PMON passes arguments in C main() style */
-void __init prom_init(void)
-{
- int argc = fw_arg0;
- char **arg = (char **)fw_arg1;
- int i;
-
- /* if user passes kernel args, ignore the default one */
- if (argc > 1)
- arcs_cmdline[0] = '\0';
-
- /* arg[0] is "g", the rest is boot parameters */
- for (i = 1; i < argc; i++) {
- if (strlen(arcs_cmdline) + strlen(arg[i]) + 1
- >= sizeof(arcs_cmdline))
- break;
- strcat(arcs_cmdline, arg[i]);
- strcat(arcs_cmdline, " ");
- }
-
-#ifdef CONFIG_NEC_MARKEINS
- add_memory_region(0, EMMA2RH_RAM_SIZE, BOOT_MEM_RAM);
-#else
-#error Unknown NEC board
-#endif
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
diff --git a/arch/mips/emma/markeins/Makefile b/arch/mips/emma/markeins/Makefile
deleted file mode 100644
index 8c8649069504..000000000000
--- a/arch/mips/emma/markeins/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-#
-# Copyright (C) NEC Electronics Corporation 2005-2006
-#
-
-obj-$(CONFIG_NEC_MARKEINS) += irq.o setup.o led.o platform.o
diff --git a/arch/mips/emma/markeins/irq.c b/arch/mips/emma/markeins/irq.c
deleted file mode 100644
index 4aebf559be2e..000000000000
--- a/arch/mips/emma/markeins/irq.c
+++ /dev/null
@@ -1,293 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) NEC Electronics Corporation 2004-2006
- *
- * This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c
- *
- * Copyright 2001 MontaVista Software Inc.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/delay.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-
-#include <asm/emma/emma2rh.h>
-
-static void emma2rh_irq_enable(struct irq_data *d)
-{
- unsigned int irq = d->irq - EMMA2RH_IRQ_BASE;
- u32 reg_value, reg_bitmask, reg_index;
-
- reg_index = EMMA2RH_BHIF_INT_EN_0 +
- (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0) * (irq / 32);
- reg_value = emma2rh_in32(reg_index);
- reg_bitmask = 0x1 << (irq % 32);
- emma2rh_out32(reg_index, reg_value | reg_bitmask);
-}
-
-static void emma2rh_irq_disable(struct irq_data *d)
-{
- unsigned int irq = d->irq - EMMA2RH_IRQ_BASE;
- u32 reg_value, reg_bitmask, reg_index;
-
- reg_index = EMMA2RH_BHIF_INT_EN_0 +
- (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0) * (irq / 32);
- reg_value = emma2rh_in32(reg_index);
- reg_bitmask = 0x1 << (irq % 32);
- emma2rh_out32(reg_index, reg_value & ~reg_bitmask);
-}
-
-struct irq_chip emma2rh_irq_controller = {
- .name = "emma2rh_irq",
- .irq_mask = emma2rh_irq_disable,
- .irq_unmask = emma2rh_irq_enable,
-};
-
-void emma2rh_irq_init(void)
-{
- u32 i;
-
- for (i = 0; i < NUM_EMMA2RH_IRQ; i++)
- irq_set_chip_and_handler_name(EMMA2RH_IRQ_BASE + i,
- &emma2rh_irq_controller,
- handle_level_irq, "level");
-}
-
-static void emma2rh_sw_irq_enable(struct irq_data *d)
-{
- unsigned int irq = d->irq - EMMA2RH_SW_IRQ_BASE;
- u32 reg;
-
- reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
- reg |= 1 << irq;
- emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg);
-}
-
-static void emma2rh_sw_irq_disable(struct irq_data *d)
-{
- unsigned int irq = d->irq - EMMA2RH_SW_IRQ_BASE;
- u32 reg;
-
- reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
- reg &= ~(1 << irq);
- emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg);
-}
-
-struct irq_chip emma2rh_sw_irq_controller = {
- .name = "emma2rh_sw_irq",
- .irq_mask = emma2rh_sw_irq_disable,
- .irq_unmask = emma2rh_sw_irq_enable,
-};
-
-void emma2rh_sw_irq_init(void)
-{
- u32 i;
-
- for (i = 0; i < NUM_EMMA2RH_IRQ_SW; i++)
- irq_set_chip_and_handler_name(EMMA2RH_SW_IRQ_BASE + i,
- &emma2rh_sw_irq_controller,
- handle_level_irq, "level");
-}
-
-static void emma2rh_gpio_irq_enable(struct irq_data *d)
-{
- unsigned int irq = d->irq - EMMA2RH_GPIO_IRQ_BASE;
- u32 reg;
-
- reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
- reg |= 1 << irq;
- emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
-}
-
-static void emma2rh_gpio_irq_disable(struct irq_data *d)
-{
- unsigned int irq = d->irq - EMMA2RH_GPIO_IRQ_BASE;
- u32 reg;
-
- reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
- reg &= ~(1 << irq);
- emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
-}
-
-static void emma2rh_gpio_irq_ack(struct irq_data *d)
-{
- unsigned int irq = d->irq - EMMA2RH_GPIO_IRQ_BASE;
-
- emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~(1 << irq));
-}
-
-static void emma2rh_gpio_irq_mask_ack(struct irq_data *d)
-{
- unsigned int irq = d->irq - EMMA2RH_GPIO_IRQ_BASE;
- u32 reg;
-
- emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~(1 << irq));
-
- reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
- reg &= ~(1 << irq);
- emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
-}
-
-struct irq_chip emma2rh_gpio_irq_controller = {
- .name = "emma2rh_gpio_irq",
- .irq_ack = emma2rh_gpio_irq_ack,
- .irq_mask = emma2rh_gpio_irq_disable,
- .irq_mask_ack = emma2rh_gpio_irq_mask_ack,
- .irq_unmask = emma2rh_gpio_irq_enable,
-};
-
-void emma2rh_gpio_irq_init(void)
-{
- u32 i;
-
- for (i = 0; i < NUM_EMMA2RH_IRQ_GPIO; i++)
- irq_set_chip_and_handler_name(EMMA2RH_GPIO_IRQ_BASE + i,
- &emma2rh_gpio_irq_controller,
- handle_edge_irq, "edge");
-}
-
-/*
- * the first level int-handler will jump here if it is a emma2rh irq
- */
-void emma2rh_irq_dispatch(void)
-{
- u32 intStatus;
- u32 bitmask;
- u32 i;
-
- intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_0) &
- emma2rh_in32(EMMA2RH_BHIF_INT_EN_0);
-
-#ifdef EMMA2RH_SW_CASCADE
- if (intStatus & (1UL << EMMA2RH_SW_CASCADE)) {
- u32 swIntStatus;
- swIntStatus = emma2rh_in32(EMMA2RH_BHIF_SW_INT)
- & emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
- for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) {
- if (swIntStatus & bitmask) {
- do_IRQ(EMMA2RH_SW_IRQ_BASE + i);
- return;
- }
- }
- }
- /* Skip S/W interrupt */
- intStatus &= ~(1UL << EMMA2RH_SW_CASCADE);
-#endif
-
- for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) {
- if (intStatus & bitmask) {
- do_IRQ(EMMA2RH_IRQ_BASE + i);
- return;
- }
- }
-
- intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_1) &
- emma2rh_in32(EMMA2RH_BHIF_INT_EN_1);
-
-#ifdef EMMA2RH_GPIO_CASCADE
- if (intStatus & (1UL << (EMMA2RH_GPIO_CASCADE % 32))) {
- u32 gpioIntStatus;
- gpioIntStatus = emma2rh_in32(EMMA2RH_GPIO_INT_ST)
- & emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
- for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) {
- if (gpioIntStatus & bitmask) {
- do_IRQ(EMMA2RH_GPIO_IRQ_BASE + i);
- return;
- }
- }
- }
- /* Skip GPIO interrupt */
- intStatus &= ~(1UL << (EMMA2RH_GPIO_CASCADE % 32));
-#endif
-
- for (i = 32, bitmask = 1; i < 64; i++, bitmask <<= 1) {
- if (intStatus & bitmask) {
- do_IRQ(EMMA2RH_IRQ_BASE + i);
- return;
- }
- }
-
- intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_2) &
- emma2rh_in32(EMMA2RH_BHIF_INT_EN_2);
-
- for (i = 64, bitmask = 1; i < 96; i++, bitmask <<= 1) {
- if (intStatus & bitmask) {
- do_IRQ(EMMA2RH_IRQ_BASE + i);
- return;
- }
- }
-}
-
-void __init arch_init_irq(void)
-{
- u32 reg;
- int irq;
-
- /* by default, interrupts are disabled. */
- emma2rh_out32(EMMA2RH_BHIF_INT_EN_0, 0);
- emma2rh_out32(EMMA2RH_BHIF_INT_EN_1, 0);
- emma2rh_out32(EMMA2RH_BHIF_INT_EN_2, 0);
- emma2rh_out32(EMMA2RH_BHIF_INT1_EN_0, 0);
- emma2rh_out32(EMMA2RH_BHIF_INT1_EN_1, 0);
- emma2rh_out32(EMMA2RH_BHIF_INT1_EN_2, 0);
- emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, 0);
-
- clear_c0_status(0xff00);
- set_c0_status(0x0400);
-
-#define GPIO_PCI (0xf<<15)
- /* setup GPIO interrupt for PCI interface */
- /* direction input */
- reg = emma2rh_in32(EMMA2RH_GPIO_DIR);
- emma2rh_out32(EMMA2RH_GPIO_DIR, reg & ~GPIO_PCI);
- /* disable interrupt */
- reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
- emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg & ~GPIO_PCI);
- /* level triggerd */
- reg = emma2rh_in32(EMMA2RH_GPIO_INT_MODE);
- emma2rh_out32(EMMA2RH_GPIO_INT_MODE, reg | GPIO_PCI);
- reg = emma2rh_in32(EMMA2RH_GPIO_INT_CND_A);
- emma2rh_out32(EMMA2RH_GPIO_INT_CND_A, reg & (~GPIO_PCI));
- /* interrupt clear */
- emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~GPIO_PCI);
-
- /* init all controllers */
- emma2rh_irq_init();
- emma2rh_sw_irq_init();
- emma2rh_gpio_irq_init();
- mips_cpu_irq_init();
-
- /* setup cascade interrupts */
- irq = EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE;
- if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
- pr_err("Failed to request irq %d (cascade)\n", irq);
- irq = EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE;
- if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
- pr_err("Failed to request irq %d (cascade)\n", irq);
- irq = MIPS_CPU_IRQ_BASE + 2;
- if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
- pr_err("Failed to request irq %d (cascade)\n", irq);
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
-
- if (pending & STATUSF_IP7)
- do_IRQ(MIPS_CPU_IRQ_BASE + 7);
- else if (pending & STATUSF_IP2)
- emma2rh_irq_dispatch();
- else if (pending & STATUSF_IP1)
- do_IRQ(MIPS_CPU_IRQ_BASE + 1);
- else if (pending & STATUSF_IP0)
- do_IRQ(MIPS_CPU_IRQ_BASE + 0);
- else
- spurious_interrupt();
-}
diff --git a/arch/mips/emma/markeins/led.c b/arch/mips/emma/markeins/led.c
deleted file mode 100644
index d377542c0ec4..000000000000
--- a/arch/mips/emma/markeins/led.c
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) NEC Electronics Corporation 2004-2006
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <asm/emma/emma2rh.h>
-
-const unsigned long clear = 0x20202020;
-
-#define LED_BASE 0xb1400038
-
-void markeins_led_clear(void)
-{
- emma2rh_out32(LED_BASE, clear);
- emma2rh_out32(LED_BASE + 4, clear);
-}
-
-void markeins_led(const char *str)
-{
- int i;
- int len = strlen(str);
-
- markeins_led_clear();
- if (len > 8)
- len = 8;
-
- if (emma2rh_in32(0xb0000800) & (0x1 << 18))
- for (i = 0; i < len; i++)
- emma2rh_out8(LED_BASE + i, str[i]);
- else
- for (i = 0; i < len; i++)
- emma2rh_out8(LED_BASE + (i & 4) + (3 - (i & 3)),
- str[i]);
-}
-
-void markeins_led_hex(u32 val)
-{
- char str[10];
-
- sprintf(str, "%08x", val);
- markeins_led(str);
-}
diff --git a/arch/mips/emma/markeins/platform.c b/arch/mips/emma/markeins/platform.c
deleted file mode 100644
index 97eeb9e8fb2b..000000000000
--- a/arch/mips/emma/markeins/platform.c
+++ /dev/null
@@ -1,199 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright(C) MontaVista Software Inc, 2006
- *
- * Author: dmitry pervushin <dpervushin@ru.mvista.com>
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/ioport.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-#include <asm/time.h>
-#include <asm/bcache.h>
-#include <asm/irq.h>
-#include <asm/reboot.h>
-#include <asm/traps.h>
-
-#include <asm/emma/emma2rh.h>
-
-
-#define I2C_EMMA2RH "emma2rh-iic" /* must be in sync with IIC driver */
-
-static struct resource i2c_emma_resources_0[] = {
- {
- .name = NULL,
- .start = EMMA2RH_IRQ_PIIC0,
- .end = EMMA2RH_IRQ_PIIC0,
- .flags = IORESOURCE_IRQ
- }, {
- .name = NULL,
- .start = EMMA2RH_PIIC0_BASE,
- .end = EMMA2RH_PIIC0_BASE + 0x1000,
- .flags = 0
- },
-};
-
-struct resource i2c_emma_resources_1[] = {
- {
- .name = NULL,
- .start = EMMA2RH_IRQ_PIIC1,
- .end = EMMA2RH_IRQ_PIIC1,
- .flags = IORESOURCE_IRQ
- }, {
- .name = NULL,
- .start = EMMA2RH_PIIC1_BASE,
- .end = EMMA2RH_PIIC1_BASE + 0x1000,
- .flags = 0
- },
-};
-
-struct resource i2c_emma_resources_2[] = {
- {
- .name = NULL,
- .start = EMMA2RH_IRQ_PIIC2,
- .end = EMMA2RH_IRQ_PIIC2,
- .flags = IORESOURCE_IRQ
- }, {
- .name = NULL,
- .start = EMMA2RH_PIIC2_BASE,
- .end = EMMA2RH_PIIC2_BASE + 0x1000,
- .flags = 0
- },
-};
-
-struct platform_device i2c_emma_devices[] = {
- [0] = {
- .name = I2C_EMMA2RH,
- .id = 0,
- .resource = i2c_emma_resources_0,
- .num_resources = ARRAY_SIZE(i2c_emma_resources_0),
- },
- [1] = {
- .name = I2C_EMMA2RH,
- .id = 1,
- .resource = i2c_emma_resources_1,
- .num_resources = ARRAY_SIZE(i2c_emma_resources_1),
- },
- [2] = {
- .name = I2C_EMMA2RH,
- .id = 2,
- .resource = i2c_emma_resources_2,
- .num_resources = ARRAY_SIZE(i2c_emma_resources_2),
- },
-};
-
-#define EMMA2RH_SERIAL_CLOCK 18544000
-#define EMMA2RH_SERIAL_FLAGS UPF_BOOT_AUTOCONF | UPF_SKIP_TEST
-
-static struct plat_serial8250_port platform_serial_ports[] = {
- [0] = {
- .membase= (void __iomem*)KSEG1ADDR(EMMA2RH_PFUR0_BASE + 3),
- .mapbase = EMMA2RH_PFUR0_BASE + 3,
- .irq = EMMA2RH_IRQ_PFUR0,
- .uartclk = EMMA2RH_SERIAL_CLOCK,
- .regshift = 4,
- .iotype = UPIO_MEM,
- .flags = EMMA2RH_SERIAL_FLAGS,
- }, [1] = {
- .membase = (void __iomem*)KSEG1ADDR(EMMA2RH_PFUR1_BASE + 3),
- .mapbase = EMMA2RH_PFUR1_BASE + 3,
- .irq = EMMA2RH_IRQ_PFUR1,
- .uartclk = EMMA2RH_SERIAL_CLOCK,
- .regshift = 4,
- .iotype = UPIO_MEM,
- .flags = EMMA2RH_SERIAL_FLAGS,
- }, [2] = {
- .membase = (void __iomem*)KSEG1ADDR(EMMA2RH_PFUR2_BASE + 3),
- .mapbase = EMMA2RH_PFUR2_BASE + 3,
- .irq = EMMA2RH_IRQ_PFUR2,
- .uartclk = EMMA2RH_SERIAL_CLOCK,
- .regshift = 4,
- .iotype = UPIO_MEM,
- .flags = EMMA2RH_SERIAL_FLAGS,
- }, [3] = {
- .flags = 0,
- },
-};
-
-static struct platform_device serial_emma = {
- .name = "serial8250",
- .dev = {
- .platform_data = &platform_serial_ports,
- },
-};
-
-static struct mtd_partition markeins_parts[] = {
- [0] = {
- .name = "RootFS",
- .offset = 0x00000000,
- .size = 0x00c00000,
- },
- [1] = {
- .name = "boot code area",
- .offset = MTDPART_OFS_APPEND,
- .size = 0x00100000,
- },
- [2] = {
- .name = "kernel image",
- .offset = MTDPART_OFS_APPEND,
- .size = 0x00300000,
- },
- [3] = {
- .name = "RootFS2",
- .offset = MTDPART_OFS_APPEND,
- .size = 0x00c00000,
- },
- [4] = {
- .name = "boot code area2",
- .offset = MTDPART_OFS_APPEND,
- .size = 0x00100000,
- },
- [5] = {
- .name = "kernel image2",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data markeins_flash_data = {
- .width = 2,
- .nr_parts = ARRAY_SIZE(markeins_parts),
- .parts = markeins_parts
-};
-
-static struct resource markeins_flash_resource = {
- .start = 0x1e000000,
- .end = 0x02000000,
- .flags = IORESOURCE_MEM
-};
-
-static struct platform_device markeins_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &markeins_flash_data,
- },
- .num_resources = 1,
- .resource = &markeins_flash_resource,
-};
-
-static struct platform_device *devices[] = {
- i2c_emma_devices,
- i2c_emma_devices + 1,
- i2c_emma_devices + 2,
- &serial_emma,
- &markeins_flash_device,
-};
-
-static int __init platform_devices_setup(void)
-{
- return platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-arch_initcall(platform_devices_setup);
diff --git a/arch/mips/emma/markeins/setup.c b/arch/mips/emma/markeins/setup.c
deleted file mode 100644
index c8a91c2a63bc..000000000000
--- a/arch/mips/emma/markeins/setup.c
+++ /dev/null
@@ -1,115 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) NEC Electronics Corporation 2004-2006
- *
- * This file is based on the arch/mips/ddb5xxx/ddb5477/setup.c.
- *
- * Copyright 2001 MontaVista Software Inc.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#include <asm/time.h>
-#include <asm/reboot.h>
-
-#include <asm/emma/emma2rh.h>
-
-#define USE_CPU_COUNTER_TIMER /* whether we use cpu counter */
-
-extern void markeins_led(const char *);
-
-static int bus_frequency;
-
-static void markeins_machine_restart(char *command)
-{
- static void (*back_to_prom) (void) = (void (*)(void))0xbfc00000;
-
- printk("cannot EMMA2RH Mark-eins restart.\n");
- markeins_led("restart.");
- back_to_prom();
-}
-
-static void markeins_machine_halt(void)
-{
- printk("EMMA2RH Mark-eins halted.\n");
- markeins_led("halted.");
- while (1) ;
-}
-
-static void markeins_machine_power_off(void)
-{
- markeins_led("poweroff.");
- while (1) ;
-}
-
-static unsigned long __initdata emma2rh_clock[4] = {
- 166500000, 187312500, 199800000, 210600000
-};
-
-static unsigned int __init detect_bus_frequency(unsigned long rtc_base)
-{
- u32 reg;
-
- /* detect from boot strap */
- reg = emma2rh_in32(EMMA2RH_BHIF_STRAP_0);
- reg = (reg >> 4) & 0x3;
-
- return emma2rh_clock[reg];
-}
-
-void __init plat_time_init(void)
-{
- u32 reg;
- if (bus_frequency == 0)
- bus_frequency = detect_bus_frequency(0);
-
- reg = emma2rh_in32(EMMA2RH_BHIF_STRAP_0);
- if ((reg & 0x3) == 0)
- reg = (reg >> 6) & 0x3;
- else {
- reg = emma2rh_in32(EMMA2RH_BHIF_MAIN_CTRL);
- reg = (reg >> 4) & 0x3;
- }
- mips_hpt_frequency = (bus_frequency * (4 + reg)) / 4 / 2;
-}
-
-static void markeins_board_init(void);
-extern void markeins_irq_setup(void);
-
-static inline void __init markeins_sio_setup(void)
-{
-}
-
-void __init plat_mem_setup(void)
-{
- /* initialize board - we don't trust the loader */
- markeins_board_init();
-
- set_io_port_base(KSEG1ADDR(EMMA2RH_PCI_IO_BASE));
-
- _machine_restart = markeins_machine_restart;
- _machine_halt = markeins_machine_halt;
- pm_power_off = markeins_machine_power_off;
-
- /* setup resource limits */
- ioport_resource.start = EMMA2RH_PCI_IO_BASE;
- ioport_resource.end = EMMA2RH_PCI_IO_BASE + EMMA2RH_PCI_IO_SIZE - 1;
- iomem_resource.start = EMMA2RH_IO_BASE;
- iomem_resource.end = EMMA2RH_ROM_BASE - 1;
-
- markeins_sio_setup();
-}
-
-static void __init markeins_board_init(void)
-{
- u32 val;
-
- val = emma2rh_in32(EMMA2RH_PBRD_INT_EN); /* open serial interrupts. */
- emma2rh_out32(EMMA2RH_PBRD_INT_EN, val | 0xaa);
- val = emma2rh_in32(EMMA2RH_PBRD_CLKSEL); /* set serial clocks. */
- emma2rh_out32(EMMA2RH_PBRD_CLKSEL, val | 0x5); /* 18MHz */
- emma2rh_out32(EMMA2RH_PCI_CONTROL, 0);
-
- markeins_led("MVL E2RH");
-}
diff --git a/arch/mips/fw/cfe/cfe_api.c b/arch/mips/fw/cfe/cfe_api.c
index c020b29f561c..0c9c97ab291e 100644
--- a/arch/mips/fw/cfe/cfe_api.c
+++ b/arch/mips/fw/cfe/cfe_api.c
@@ -243,11 +243,6 @@ int cfe_getfwinfo(cfe_fwinfo_t * info)
info->fwi_bootarea_pa = xiocb.plist.xiocb_fwinfo.fwi_bootarea_pa;
info->fwi_bootarea_size =
xiocb.plist.xiocb_fwinfo.fwi_bootarea_size;
-#if 0
- info->fwi_reserved1 = xiocb.plist.xiocb_fwinfo.fwi_reserved1;
- info->fwi_reserved2 = xiocb.plist.xiocb_fwinfo.fwi_reserved2;
- info->fwi_reserved3 = xiocb.plist.xiocb_fwinfo.fwi_reserved3;
-#endif
return 0;
}
diff --git a/arch/mips/generic/Platform b/arch/mips/generic/Platform
index eaa19d189324..53c33cb72974 100644
--- a/arch/mips/generic/Platform
+++ b/arch/mips/generic/Platform
@@ -8,7 +8,6 @@
# option) any later version.
#
-platform-$(CONFIG_MIPS_GENERIC) += generic/
cflags-$(CONFIG_MIPS_GENERIC) += -I$(srctree)/arch/mips/include/asm/mach-generic
load-$(CONFIG_MIPS_GENERIC) += 0xffffffff80100000
all-$(CONFIG_MIPS_GENERIC) := vmlinux.gz.itb
diff --git a/arch/mips/include/asm/asm-eva.h b/arch/mips/include/asm/asm-eva.h
index d80be38c4144..e327ebc76753 100644
--- a/arch/mips/include/asm/asm-eva.h
+++ b/arch/mips/include/asm/asm-eva.h
@@ -180,7 +180,7 @@
#define user_ld(reg, addr) kernel_lw(reg, addr)
#else
#define user_sd(reg, addr) kernel_sd(reg, addr)
-#define user_ld(reg, addr) kernel_sd(reg, addr)
+#define user_ld(reg, addr) kernel_ld(reg, addr)
#endif /* CONFIG_32BIT */
#endif /* CONFIG_EVA */
diff --git a/arch/mips/include/asm/asm.h b/arch/mips/include/asm/asm.h
index c23527ba65d0..3682d1a0bb80 100644
--- a/arch/mips/include/asm/asm.h
+++ b/arch/mips/include/asm/asm.h
@@ -74,10 +74,15 @@ symbol: .insn
.globl symbol; \
symbol = value
-#define PANIC(msg) \
+#define TEXT(msg) \
+ .pushsection .data; \
+8: .asciiz msg; \
+ .popsection;
+
+#define ASM_PANIC(msg) \
.set push; \
.set reorder; \
- PTR_LA a0, 8f; \
+ PTR_LA a0, 8f; \
jal panic; \
9: b 9b; \
.set pop; \
@@ -87,22 +92,17 @@ symbol = value
* Print formatted string
*/
#ifdef CONFIG_PRINTK
-#define PRINT(string) \
+#define ASM_PRINT(string) \
.set push; \
.set reorder; \
- PTR_LA a0, 8f; \
+ PTR_LA a0, 8f; \
jal printk; \
.set pop; \
TEXT(string)
#else
-#define PRINT(string)
+#define ASM_PRINT(string)
#endif
-#define TEXT(msg) \
- .pushsection .data; \
-8: .asciiz msg; \
- .popsection;
-
/*
* Stack alignment
*/
@@ -202,7 +202,9 @@ symbol = value
#define LONG_SRA sra
#define LONG_SRAV srav
+#ifdef __ASSEMBLY__
#define LONG .word
+#endif
#define LONGSIZE 4
#define LONGMASK 3
#define LONGLOG 2
@@ -225,7 +227,9 @@ symbol = value
#define LONG_SRA dsra
#define LONG_SRAV dsrav
+#ifdef __ASSEMBLY__
#define LONG .dword
+#endif
#define LONGSIZE 8
#define LONGMASK 7
#define LONGLOG 3
diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h
index 655f40ddb6d1..86f2323ebe6b 100644
--- a/arch/mips/include/asm/asmmacro.h
+++ b/arch/mips/include/asm/asmmacro.h
@@ -44,7 +44,8 @@
.endm
#endif
-#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \
+ defined(CONFIG_CPU_MIPSR6)
.macro local_irq_enable reg=t0
ei
irq_enable_hazard
@@ -54,7 +55,7 @@
di
irq_disable_hazard
.endm
-#else
+#else /* !CONFIG_CPU_MIPSR2 && !CONFIG_CPU_MIPSR5 && !CONFIG_CPU_MIPSR6 */
.macro local_irq_enable reg=t0
mfc0 \reg, CP0_STATUS
ori \reg, \reg, 1
@@ -79,7 +80,7 @@
sw \reg, TI_PRE_COUNT($28)
#endif
.endm
-#endif /* CONFIG_CPU_MIPSR2 */
+#endif /* !CONFIG_CPU_MIPSR2 && !CONFIG_CPU_MIPSR5 && !CONFIG_CPU_MIPSR6 */
.macro fpu_save_16even thread tmp=t0
.set push
@@ -131,7 +132,7 @@
.macro fpu_save_double thread status tmp
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
- defined(CONFIG_CPU_MIPSR6)
+ defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6)
sll \tmp, \status, 5
bgez \tmp, 10f
fpu_save_16odd \thread
@@ -190,7 +191,7 @@
.macro fpu_restore_double thread status tmp
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
- defined(CONFIG_CPU_MIPSR6)
+ defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6)
sll \tmp, \status, 5
bgez \tmp, 10f # 16 register mode?
@@ -200,16 +201,17 @@
fpu_restore_16even \thread \tmp
.endm
-#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \
+ defined(CONFIG_CPU_MIPSR6)
.macro _EXT rd, rs, p, s
ext \rd, \rs, \p, \s
.endm
-#else /* !CONFIG_CPU_MIPSR2 || !CONFIG_CPU_MIPSR6 */
+#else /* !CONFIG_CPU_MIPSR2 && !CONFIG_CPU_MIPSR5 && !CONFIG_CPU_MIPSR6 */
.macro _EXT rd, rs, p, s
srl \rd, \rs, \p
andi \rd, \rd, (1 << \s) - 1
.endm
-#endif /* !CONFIG_CPU_MIPSR2 || !CONFIG_CPU_MIPSR6 */
+#endif /* !CONFIG_CPU_MIPSR2 && !CONFIG_CPU_MIPSR5 && !CONFIG_CPU_MIPSR6 */
/*
* Temporary until all gas have MT ASE support
diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
index 61727785a247..c3bd9b2d66e4 100644
--- a/arch/mips/include/asm/bootinfo.h
+++ b/arch/mips/include/asm/bootinfo.h
@@ -42,17 +42,6 @@
#define MACH_DS5900 10 /* DECsystem 5900 */
/*
- * Valid machtype for group PMC-MSP
- */
-#define MACH_MSP4200_EVAL 0 /* PMC-Sierra MSP4200 Evaluation */
-#define MACH_MSP4200_GW 1 /* PMC-Sierra MSP4200 Gateway demo */
-#define MACH_MSP4200_FPGA 2 /* PMC-Sierra MSP4200 Emulation */
-#define MACH_MSP7120_EVAL 3 /* PMC-Sierra MSP7120 Evaluation */
-#define MACH_MSP7120_GW 4 /* PMC-Sierra MSP7120 Residential GW */
-#define MACH_MSP7120_FPGA 5 /* PMC-Sierra MSP7120 Emulation */
-#define MACH_MSP_OTHER 255 /* PMC-Sierra unknown board type */
-
-/*
* Valid machtype for group Mikrotik
*/
#define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */
@@ -121,7 +110,7 @@ extern unsigned long fw_passed_dtb;
#endif
/*
- * Platform memory detection hook called by setup_arch
+ * Platform memory detection hook called by arch_mem_init()
*/
extern void plat_mem_setup(void);
diff --git a/arch/mips/include/asm/branch.h b/arch/mips/include/asm/branch.h
index da80878f2c0d..fa3dcbf56fa9 100644
--- a/arch/mips/include/asm/branch.h
+++ b/arch/mips/include/asm/branch.h
@@ -27,6 +27,9 @@ extern int __MIPS16e_compute_return_epc(struct pt_regs *regs);
#define MM_POOL32A_MINOR_SHIFT 0x6
#define MM_MIPS32_COND_FC 0x30
+int isBranchInstr(struct pt_regs *regs,
+ struct mm_decoded_insn dec_insn, unsigned long *contpc);
+
extern int __mm_isBranchInstr(struct pt_regs *regs,
struct mm_decoded_insn dec_insn, unsigned long *contpc);
diff --git a/arch/mips/include/asm/cacheops.h b/arch/mips/include/asm/cacheops.h
index 8031fbc6b69a..50253efecb56 100644
--- a/arch/mips/include/asm/cacheops.h
+++ b/arch/mips/include/asm/cacheops.h
@@ -48,7 +48,7 @@
* R4000-specific cacheops
*/
#define Create_Dirty_Excl_D (Cache_D | 0x0c)
-#define Fill (Cache_I | 0x14)
+#define Fill_I (Cache_I | 0x14)
#define Hit_Writeback_I (Cache_I | Hit_Writeback)
#define Hit_Writeback_D (Cache_D | Hit_Writeback)
diff --git a/arch/mips/include/asm/clock.h b/arch/mips/include/asm/clock.h
deleted file mode 100644
index 5a8f96ebe5fa..000000000000
--- a/arch/mips/include/asm/clock.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MIPS_CLOCK_H
-#define __ASM_MIPS_CLOCK_H
-
-#include <linux/kref.h>
-#include <linux/list.h>
-#include <linux/seq_file.h>
-#include <linux/clk.h>
-
-struct clk;
-
-struct clk_ops {
- void (*init) (struct clk *clk);
- void (*enable) (struct clk *clk);
- void (*disable) (struct clk *clk);
- void (*recalc) (struct clk *clk);
- int (*set_rate) (struct clk *clk, unsigned long rate, int algo_id);
- long (*round_rate) (struct clk *clk, unsigned long rate);
-};
-
-struct clk {
- struct list_head node;
- const char *name;
- int id;
- struct module *owner;
-
- struct clk *parent;
- struct clk_ops *ops;
-
- struct kref kref;
-
- unsigned long rate;
- unsigned long flags;
-};
-
-#define CLK_ALWAYS_ENABLED (1 << 0)
-#define CLK_RATE_PROPAGATES (1 << 1)
-
-int clk_init(void);
-
-int __clk_enable(struct clk *);
-void __clk_disable(struct clk *);
-
-void clk_recalc_rate(struct clk *);
-
-int clk_register(struct clk *);
-void clk_unregister(struct clk *);
-
-#endif /* __ASM_MIPS_CLOCK_H */
diff --git a/arch/mips/include/asm/compiler.h b/arch/mips/include/asm/compiler.h
index f77e99f1722e..a2cb2d2b1c07 100644
--- a/arch/mips/include/asm/compiler.h
+++ b/arch/mips/include/asm/compiler.h
@@ -57,6 +57,11 @@
#define MIPS_ISA_ARCH_LEVEL MIPS_ISA_LEVEL
#define MIPS_ISA_LEVEL_RAW mips64r6
#define MIPS_ISA_ARCH_LEVEL_RAW MIPS_ISA_LEVEL_RAW
+#elif defined(CONFIG_CPU_MIPSR5)
+#define MIPS_ISA_LEVEL "mips64r5"
+#define MIPS_ISA_ARCH_LEVEL MIPS_ISA_LEVEL
+#define MIPS_ISA_LEVEL_RAW mips64r5
+#define MIPS_ISA_ARCH_LEVEL_RAW MIPS_ISA_LEVEL_RAW
#else
/* MIPS64 is a superset of MIPS32 */
#define MIPS_ISA_LEVEL "mips64r2"
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index de44c92b1c1f..caecbae4b599 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -284,14 +284,23 @@
#ifndef cpu_has_mips32r2
# define cpu_has_mips32r2 __isa_range_or_flag(2, 6, MIPS_CPU_ISA_M32R2)
#endif
+#ifndef cpu_has_mips32r5
+# define cpu_has_mips32r5 __isa_range_or_flag(5, 6, MIPS_CPU_ISA_M32R5)
+#endif
#ifndef cpu_has_mips32r6
# define cpu_has_mips32r6 __isa_ge_or_flag(6, MIPS_CPU_ISA_M32R6)
#endif
#ifndef cpu_has_mips64r1
-# define cpu_has_mips64r1 __isa_range_or_flag(1, 6, MIPS_CPU_ISA_M64R1)
+# define cpu_has_mips64r1 (cpu_has_64bits && \
+ __isa_range_or_flag(1, 6, MIPS_CPU_ISA_M64R1))
#endif
#ifndef cpu_has_mips64r2
-# define cpu_has_mips64r2 __isa_range_or_flag(2, 6, MIPS_CPU_ISA_M64R2)
+# define cpu_has_mips64r2 (cpu_has_64bits && \
+ __isa_range_or_flag(2, 6, MIPS_CPU_ISA_M64R2))
+#endif
+#ifndef cpu_has_mips64r5
+# define cpu_has_mips64r5 (cpu_has_64bits && \
+ __isa_range_or_flag(5, 6, MIPS_CPU_ISA_M64R5))
#endif
#ifndef cpu_has_mips64r6
# define cpu_has_mips64r6 __isa_ge_and_flag(6, MIPS_CPU_ISA_M64R6)
@@ -313,19 +322,25 @@
(cpu_has_mips_3 | cpu_has_mips_4_5_64_r2_r6)
#define cpu_has_mips_4_5_64_r2_r6 \
(cpu_has_mips_4_5 | cpu_has_mips64r1 | \
- cpu_has_mips_r2 | cpu_has_mips_r6)
+ cpu_has_mips_r2 | cpu_has_mips_r5 | \
+ cpu_has_mips_r6)
-#define cpu_has_mips32 (cpu_has_mips32r1 | cpu_has_mips32r2 | cpu_has_mips32r6)
-#define cpu_has_mips64 (cpu_has_mips64r1 | cpu_has_mips64r2 | cpu_has_mips64r6)
+#define cpu_has_mips32 (cpu_has_mips32r1 | cpu_has_mips32r2 | \
+ cpu_has_mips32r5 | cpu_has_mips32r6)
+#define cpu_has_mips64 (cpu_has_mips64r1 | cpu_has_mips64r2 | \
+ cpu_has_mips64r5 | cpu_has_mips64r6)
#define cpu_has_mips_r1 (cpu_has_mips32r1 | cpu_has_mips64r1)
#define cpu_has_mips_r2 (cpu_has_mips32r2 | cpu_has_mips64r2)
+#define cpu_has_mips_r5 (cpu_has_mips32r5 | cpu_has_mips64r5)
#define cpu_has_mips_r6 (cpu_has_mips32r6 | cpu_has_mips64r6)
#define cpu_has_mips_r (cpu_has_mips32r1 | cpu_has_mips32r2 | \
- cpu_has_mips32r6 | cpu_has_mips64r1 | \
- cpu_has_mips64r2 | cpu_has_mips64r6)
+ cpu_has_mips32r5 | cpu_has_mips32r6 | \
+ cpu_has_mips64r1 | cpu_has_mips64r2 | \
+ cpu_has_mips64r5 | cpu_has_mips64r6)
-/* MIPSR2 and MIPSR6 have a lot of similarities */
-#define cpu_has_mips_r2_r6 (cpu_has_mips_r2 | cpu_has_mips_r6)
+/* MIPSR2 - MIPSR6 have a lot of similarities */
+#define cpu_has_mips_r2_r6 (cpu_has_mips_r2 | cpu_has_mips_r5 | \
+ cpu_has_mips_r6)
/*
* cpu_has_mips_r2_exec_hazard - return if IHB is required on current processor
@@ -435,9 +450,6 @@
# ifndef cpu_has_64bit_gp_regs
# define cpu_has_64bit_gp_regs 0
# endif
-# ifndef cpu_has_64bit_addresses
-# define cpu_has_64bit_addresses 0
-# endif
# ifndef cpu_vmbits
# define cpu_vmbits 31
# endif
@@ -456,9 +468,6 @@
# ifndef cpu_has_64bit_gp_regs
# define cpu_has_64bit_gp_regs 1
# endif
-# ifndef cpu_has_64bit_addresses
-# define cpu_has_64bit_addresses 1
-# endif
# ifndef cpu_vmbits
# define cpu_vmbits cpu_data[0].vmbits
# define __NEED_VMBITS_PROBE
@@ -620,6 +629,14 @@
# endif
#endif
+#ifndef cpu_has_mm_sysad
+# define cpu_has_mm_sysad __opt(MIPS_CPU_MM_SYSAD)
+#endif
+
+#ifndef cpu_has_mm_full
+# define cpu_has_mm_full __opt(MIPS_CPU_MM_FULL)
+#endif
+
/*
* Guest capabilities
*/
diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h
index ed7ffe4e63a3..a600670d00e9 100644
--- a/arch/mips/include/asm/cpu-info.h
+++ b/arch/mips/include/asm/cpu-info.h
@@ -105,6 +105,15 @@ struct cpuinfo_mips {
unsigned int gtoffset_mask;
unsigned int guestid_mask;
unsigned int guestid_cache;
+
+#ifdef CONFIG_CPU_LOONGSON3_CPUCFG_EMULATION
+ /* CPUCFG data for this CPU, synthesized at probe time.
+ *
+ * CPUCFG select 0 is PRId, 4 and above are unimplemented for now.
+ * So the only stored values are for CPUCFG selects 1-3 inclusive.
+ */
+ u32 loongson3_cpucfg_data[3];
+#endif
} __attribute__((aligned(SMP_CACHE_BYTES)));
extern struct cpuinfo_mips cpu_data[];
@@ -142,7 +151,7 @@ struct proc_cpuinfo_notifier_args {
static inline unsigned int cpu_cluster(struct cpuinfo_mips *cpuinfo)
{
/* Optimisation for systems where multiple clusters aren't used */
- if (!IS_ENABLED(CONFIG_CPU_MIPSR6))
+ if (!IS_ENABLED(CONFIG_CPU_MIPSR5) && !IS_ENABLED(CONFIG_CPU_MIPSR6))
return 0;
return (cpuinfo->globalnumber & MIPS_GLOBALNUMBER_CLUSTER) >>
diff --git a/arch/mips/include/asm/cpu-type.h b/arch/mips/include/asm/cpu-type.h
index 49f0061a6051..75a7a382da09 100644
--- a/arch/mips/include/asm/cpu-type.h
+++ b/arch/mips/include/asm/cpu-type.h
@@ -51,13 +51,18 @@ static inline int __pure __get_cpu_type(const int cpu_type)
case CPU_M14KEC:
case CPU_INTERAPTIV:
case CPU_PROAPTIV:
- case CPU_P5600:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_MIPS32_R5
case CPU_M5150:
+ case CPU_P5600:
#endif
#if defined(CONFIG_SYS_HAS_CPU_MIPS32_R2) || \
+ defined(CONFIG_SYS_HAS_CPU_MIPS32_R5) || \
defined(CONFIG_SYS_HAS_CPU_MIPS32_R6) || \
defined(CONFIG_SYS_HAS_CPU_MIPS64_R2) || \
+ defined(CONFIG_SYS_HAS_CPU_MIPS64_R5) || \
defined(CONFIG_SYS_HAS_CPU_MIPS64_R6)
case CPU_QEMU_GENERIC:
#endif
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 216a22916740..104a509312b3 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -250,6 +250,10 @@
#define PRID_REV_LOONGSON1C 0x0020 /* Same as Loongson-1B */
#define PRID_REV_LOONGSON2E 0x0002
#define PRID_REV_LOONGSON2F 0x0003
+#define PRID_REV_LOONGSON2K_R1_0 0x0000
+#define PRID_REV_LOONGSON2K_R1_1 0x0001
+#define PRID_REV_LOONGSON2K_R1_2 0x0002
+#define PRID_REV_LOONGSON2K_R1_3 0x0003
#define PRID_REV_LOONGSON3A_R1 0x0005
#define PRID_REV_LOONGSON3B_R1 0x0006
#define PRID_REV_LOONGSON3B_R2 0x0007
@@ -343,14 +347,16 @@ enum cpu_type_enum {
#define MIPS_CPU_ISA_M32R2 0x00000020
#define MIPS_CPU_ISA_M64R1 0x00000040
#define MIPS_CPU_ISA_M64R2 0x00000080
-#define MIPS_CPU_ISA_M32R6 0x00000100
-#define MIPS_CPU_ISA_M64R6 0x00000200
+#define MIPS_CPU_ISA_M32R5 0x00000100
+#define MIPS_CPU_ISA_M64R5 0x00000200
+#define MIPS_CPU_ISA_M32R6 0x00000400
+#define MIPS_CPU_ISA_M64R6 0x00000800
#define MIPS_CPU_ISA_32BIT (MIPS_CPU_ISA_II | MIPS_CPU_ISA_M32R1 | \
- MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M32R6)
+ MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M32R6)
#define MIPS_CPU_ISA_64BIT (MIPS_CPU_ISA_III | MIPS_CPU_ISA_IV | \
MIPS_CPU_ISA_V | MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2 | \
- MIPS_CPU_ISA_M64R6)
+ MIPS_CPU_ISA_M64R5 | MIPS_CPU_ISA_M64R6)
/*
* CPU Option encodings
@@ -416,7 +422,9 @@ enum cpu_type_enum {
#define MIPS_CPU_MT_PER_TC_PERF_COUNTERS \
BIT_ULL(56) /* CPU has perf counters implemented per TC (MIPSMT ASE) */
#define MIPS_CPU_MMID BIT_ULL(57) /* CPU supports MemoryMapIDs */
-#define MIPS_CPU_MAC_2008_ONLY BIT_ULL(58) /* CPU Only support MAC2008 Fused multiply-add instruction */
+#define MIPS_CPU_MM_SYSAD BIT_ULL(58) /* CPU supports write-through SysAD Valid merge */
+#define MIPS_CPU_MM_FULL BIT_ULL(59) /* CPU supports write-through full merge */
+#define MIPS_CPU_MAC_2008_ONLY BIT_ULL(60) /* CPU Only support MAC2008 Fused multiply-add instruction */
/*
* CPU ASE encodings
diff --git a/arch/mips/include/asm/emma/emma2rh.h b/arch/mips/include/asm/emma/emma2rh.h
deleted file mode 100644
index a25cdb378fe8..000000000000
--- a/arch/mips/include/asm/emma/emma2rh.h
+++ /dev/null
@@ -1,248 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) NEC Electronics Corporation 2005-2006
- *
- * This file based on include/asm-mips/ddb5xxx/ddb5xxx.h
- * Copyright 2001 MontaVista Software Inc.
- */
-#ifndef __ASM_EMMA_EMMA2RH_H
-#define __ASM_EMMA_EMMA2RH_H
-
-#include <irq.h>
-
-/*
- * EMMA2RH registers
- */
-#define REGBASE 0x10000000
-
-#define EMMA2RH_BHIF_STRAP_0 (0x000010+REGBASE)
-#define EMMA2RH_BHIF_INT_ST_0 (0x000030+REGBASE)
-#define EMMA2RH_BHIF_INT_ST_1 (0x000034+REGBASE)
-#define EMMA2RH_BHIF_INT_ST_2 (0x000038+REGBASE)
-#define EMMA2RH_BHIF_INT_EN_0 (0x000040+REGBASE)
-#define EMMA2RH_BHIF_INT_EN_1 (0x000044+REGBASE)
-#define EMMA2RH_BHIF_INT_EN_2 (0x000048+REGBASE)
-#define EMMA2RH_BHIF_INT1_EN_0 (0x000050+REGBASE)
-#define EMMA2RH_BHIF_INT1_EN_1 (0x000054+REGBASE)
-#define EMMA2RH_BHIF_INT1_EN_2 (0x000058+REGBASE)
-#define EMMA2RH_BHIF_SW_INT (0x000070+REGBASE)
-#define EMMA2RH_BHIF_SW_INT_EN (0x000080+REGBASE)
-#define EMMA2RH_BHIF_SW_INT_CLR (0x000090+REGBASE)
-#define EMMA2RH_BHIF_MAIN_CTRL (0x0000b4+REGBASE)
-#define EMMA2RH_BHIF_EXCEPT_VECT_BASE_ADDRESS (0x0000c0+REGBASE)
-#define EMMA2RH_GPIO_DIR (0x110d20+REGBASE)
-#define EMMA2RH_GPIO_INT_ST (0x110d30+REGBASE)
-#define EMMA2RH_GPIO_INT_MASK (0x110d3c+REGBASE)
-#define EMMA2RH_GPIO_INT_MODE (0x110d48+REGBASE)
-#define EMMA2RH_GPIO_INT_CND_A (0x110d54+REGBASE)
-#define EMMA2RH_GPIO_INT_CND_B (0x110d60+REGBASE)
-#define EMMA2RH_PBRD_INT_EN (0x100010+REGBASE)
-#define EMMA2RH_PBRD_CLKSEL (0x100028+REGBASE)
-#define EMMA2RH_PFUR0_BASE (0x101000+REGBASE)
-#define EMMA2RH_PFUR1_BASE (0x102000+REGBASE)
-#define EMMA2RH_PFUR2_BASE (0x103000+REGBASE)
-#define EMMA2RH_PIIC0_BASE (0x107000+REGBASE)
-#define EMMA2RH_PIIC1_BASE (0x108000+REGBASE)
-#define EMMA2RH_PIIC2_BASE (0x109000+REGBASE)
-#define EMMA2RH_PCI_CONTROL (0x200000+REGBASE)
-#define EMMA2RH_PCI_ARBIT_CTR (0x200004+REGBASE)
-#define EMMA2RH_PCI_IWIN0_CTR (0x200010+REGBASE)
-#define EMMA2RH_PCI_IWIN1_CTR (0x200014+REGBASE)
-#define EMMA2RH_PCI_INIT_ESWP (0x200018+REGBASE)
-#define EMMA2RH_PCI_INT (0x200020+REGBASE)
-#define EMMA2RH_PCI_INT_EN (0x200024+REGBASE)
-#define EMMA2RH_PCI_TWIN_CTR (0x200030+REGBASE)
-#define EMMA2RH_PCI_TWIN_BADR (0x200034+REGBASE)
-#define EMMA2RH_PCI_TWIN0_DADR (0x200038+REGBASE)
-#define EMMA2RH_PCI_TWIN1_DADR (0x20003c+REGBASE)
-
-/*
- * Memory map (physical address)
- *
- * Note most of the following address must be properly aligned by the
- * corresponding size. For example, if PCI_IO_SIZE is 16MB, then
- * PCI_IO_BASE must be aligned along 16MB boundary.
- */
-
-/* the actual ram size is detected at run-time */
-#define EMMA2RH_RAM_BASE 0x00000000
-#define EMMA2RH_RAM_SIZE 0x10000000 /* less than 256MB */
-
-#define EMMA2RH_IO_BASE 0x10000000
-#define EMMA2RH_IO_SIZE 0x01000000 /* 16 MB */
-
-#define EMMA2RH_GENERALIO_BASE 0x11000000
-#define EMMA2RH_GENERALIO_SIZE 0x01000000 /* 16 MB */
-
-#define EMMA2RH_PCI_IO_BASE 0x12000000
-#define EMMA2RH_PCI_IO_SIZE 0x02000000 /* 32 MB */
-
-#define EMMA2RH_PCI_MEM_BASE 0x14000000
-#define EMMA2RH_PCI_MEM_SIZE 0x08000000 /* 128 MB */
-
-#define EMMA2RH_ROM_BASE 0x1c000000
-#define EMMA2RH_ROM_SIZE 0x04000000 /* 64 MB */
-
-#define EMMA2RH_PCI_CONFIG_BASE EMMA2RH_PCI_IO_BASE
-#define EMMA2RH_PCI_CONFIG_SIZE EMMA2RH_PCI_IO_SIZE
-
-#define NUM_EMMA2RH_IRQ 96
-
-#define EMMA2RH_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8)
-
-/*
- * emma2rh irq defs
- */
-
-#define EMMA2RH_IRQ_INT(n) (EMMA2RH_IRQ_BASE + (n))
-
-#define EMMA2RH_IRQ_PFUR0 EMMA2RH_IRQ_INT(49)
-#define EMMA2RH_IRQ_PFUR1 EMMA2RH_IRQ_INT(50)
-#define EMMA2RH_IRQ_PFUR2 EMMA2RH_IRQ_INT(51)
-#define EMMA2RH_IRQ_PIIC0 EMMA2RH_IRQ_INT(56)
-#define EMMA2RH_IRQ_PIIC1 EMMA2RH_IRQ_INT(57)
-#define EMMA2RH_IRQ_PIIC2 EMMA2RH_IRQ_INT(58)
-
-/*
- * EMMA2RH Register Access
- */
-
-#define EMMA2RH_BASE (0xa0000000)
-
-static inline void emma2rh_sync(void)
-{
- volatile u32 *p = (volatile u32 *)0xbfc00000;
- (void)(*p);
-}
-
-static inline void emma2rh_out32(u32 offset, u32 val)
-{
- *(volatile u32 *)(EMMA2RH_BASE | offset) = val;
- emma2rh_sync();
-}
-
-static inline u32 emma2rh_in32(u32 offset)
-{
- u32 val = *(volatile u32 *)(EMMA2RH_BASE | offset);
- return val;
-}
-
-static inline void emma2rh_out16(u32 offset, u16 val)
-{
- *(volatile u16 *)(EMMA2RH_BASE | offset) = val;
- emma2rh_sync();
-}
-
-static inline u16 emma2rh_in16(u32 offset)
-{
- u16 val = *(volatile u16 *)(EMMA2RH_BASE | offset);
- return val;
-}
-
-static inline void emma2rh_out8(u32 offset, u8 val)
-{
- *(volatile u8 *)(EMMA2RH_BASE | offset) = val;
- emma2rh_sync();
-}
-
-static inline u8 emma2rh_in8(u32 offset)
-{
- u8 val = *(volatile u8 *)(EMMA2RH_BASE | offset);
- return val;
-}
-
-/**
- * IIC registers map
- **/
-
-/*---------------------------------------------------------------------------*/
-/* CNT - Control register (00H R/W) */
-/*---------------------------------------------------------------------------*/
-#define SPT 0x00000001
-#define STT 0x00000002
-#define ACKE 0x00000004
-#define WTIM 0x00000008
-#define SPIE 0x00000010
-#define WREL 0x00000020
-#define LREL 0x00000040
-#define IICE 0x00000080
-#define CNT_RESERVED 0x000000ff /* reserved bit 0 */
-
-#define I2C_EMMA_START (IICE | STT)
-#define I2C_EMMA_STOP (IICE | SPT)
-#define I2C_EMMA_REPSTART I2C_EMMA_START
-
-/*---------------------------------------------------------------------------*/
-/* STA - Status register (10H Read) */
-/*---------------------------------------------------------------------------*/
-#define MSTS 0x00000080
-#define ALD 0x00000040
-#define EXC 0x00000020
-#define COI 0x00000010
-#define TRC 0x00000008
-#define ACKD 0x00000004
-#define STD 0x00000002
-#define SPD 0x00000001
-
-/*---------------------------------------------------------------------------*/
-/* CSEL - Clock select register (20H R/W) */
-/*---------------------------------------------------------------------------*/
-#define FCL 0x00000080
-#define ND50 0x00000040
-#define CLD 0x00000020
-#define DAD 0x00000010
-#define SMC 0x00000008
-#define DFC 0x00000004
-#define CL 0x00000003
-#define CSEL_RESERVED 0x000000ff /* reserved bit 0 */
-
-#define FAST397 0x0000008b
-#define FAST297 0x0000008a
-#define FAST347 0x0000000b
-#define FAST260 0x0000000a
-#define FAST130 0x00000008
-#define STANDARD108 0x00000083
-#define STANDARD83 0x00000082
-#define STANDARD95 0x00000003
-#define STANDARD73 0x00000002
-#define STANDARD36 0x00000001
-#define STANDARD71 0x00000000
-
-/*---------------------------------------------------------------------------*/
-/* SVA - Slave address register (30H R/W) */
-/*---------------------------------------------------------------------------*/
-#define SVA 0x000000fe
-
-/*---------------------------------------------------------------------------*/
-/* SHR - Shift register (40H R/W) */
-/*---------------------------------------------------------------------------*/
-#define SR 0x000000ff
-
-/*---------------------------------------------------------------------------*/
-/* INT - Interrupt register (50H R/W) */
-/* INTM - Interrupt mask register (60H R/W) */
-/*---------------------------------------------------------------------------*/
-#define INTE0 0x00000001
-
-/***********************************************************************
- * I2C registers
- ***********************************************************************
- */
-#define I2C_EMMA_CNT 0x00
-#define I2C_EMMA_STA 0x10
-#define I2C_EMMA_CSEL 0x20
-#define I2C_EMMA_SVA 0x30
-#define I2C_EMMA_SHR 0x40
-#define I2C_EMMA_INT 0x50
-#define I2C_EMMA_INTM 0x60
-
-/*
- * include the board dependent part
- */
-#ifdef CONFIG_NEC_MARKEINS
-#include <asm/emma/markeins.h>
-#else
-#error "Unknown EMMA2RH board!"
-#endif
-
-#endif /* __ASM_EMMA_EMMA2RH_H */
diff --git a/arch/mips/include/asm/emma/markeins.h b/arch/mips/include/asm/emma/markeins.h
deleted file mode 100644
index 2d7e1339d36f..000000000000
--- a/arch/mips/include/asm/emma/markeins.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) NEC Electronics Corporation 2005-2006
- *
- * This file based on include/asm-mips/ddb5xxx/ddb5xxx.h
- * Copyright 2001 MontaVista Software Inc.
- */
-
-#ifndef MARKEINS_H
-#define MARKEINS_H
-
-#define NUM_EMMA2RH_IRQ_SW 32
-#define NUM_EMMA2RH_IRQ_GPIO 32
-
-#define EMMA2RH_SW_CASCADE (EMMA2RH_IRQ_INT(7) - EMMA2RH_IRQ_INT(0))
-#define EMMA2RH_GPIO_CASCADE (EMMA2RH_IRQ_INT(46) - EMMA2RH_IRQ_INT(0))
-
-#define EMMA2RH_SW_IRQ_BASE (EMMA2RH_IRQ_BASE + NUM_EMMA2RH_IRQ)
-#define EMMA2RH_GPIO_IRQ_BASE (EMMA2RH_SW_IRQ_BASE + NUM_EMMA2RH_IRQ_SW)
-
-#define EMMA2RH_SW_IRQ_INT(n) (EMMA2RH_SW_IRQ_BASE + (n))
-
-#define MARKEINS_PCI_IRQ_INTA EMMA2RH_GPIO_IRQ_BASE+15
-#define MARKEINS_PCI_IRQ_INTB EMMA2RH_GPIO_IRQ_BASE+16
-#define MARKEINS_PCI_IRQ_INTC EMMA2RH_GPIO_IRQ_BASE+17
-#define MARKEINS_PCI_IRQ_INTD EMMA2RH_GPIO_IRQ_BASE+18
-
-#endif /* CONFIG_MARKEINS */
diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h
index 9476e0498d59..08f9dd6903b7 100644
--- a/arch/mips/include/asm/fpu.h
+++ b/arch/mips/include/asm/fpu.h
@@ -71,12 +71,12 @@ static inline int __enable_fpu(enum fpu_mode mode)
goto fr_common;
case FPU_64BIT:
-#if !(defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6) \
- || defined(CONFIG_64BIT))
+#if !(defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \
+ defined(CONFIG_CPU_MIPSR6) || defined(CONFIG_64BIT))
/* we only have a 32-bit FPU */
return SIGFPE;
#endif
- /* fall through */
+ fallthrough;
case FPU_32BIT:
if (cpu_has_fre) {
/* clear FRE */
diff --git a/arch/mips/include/asm/fpu_emulator.h b/arch/mips/include/asm/fpu_emulator.h
index bb7c71ffe5b7..f67759e81210 100644
--- a/arch/mips/include/asm/fpu_emulator.h
+++ b/arch/mips/include/asm/fpu_emulator.h
@@ -172,10 +172,6 @@ void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr,
struct task_struct *tsk);
int process_fpemu_return(int sig, void __user *fault_addr,
unsigned long fcr31);
-int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
- unsigned long *contpc);
-int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
- unsigned long *contpc);
/*
* Mask the FCSR Cause bits according to the Enable bits, observing
diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h
index a0b92205f933..f855478d12fa 100644
--- a/arch/mips/include/asm/hazards.h
+++ b/arch/mips/include/asm/hazards.h
@@ -22,8 +22,9 @@
/*
* TLB hazards
*/
-#if (defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)) && \
- !defined(CONFIG_CPU_CAVIUM_OCTEON) && !defined(CONFIG_CPU_LOONGSON64)
+#if (defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \
+ defined(CONFIG_CPU_MIPSR6)) && \
+ !defined(CONFIG_CPU_CAVIUM_OCTEON) && !defined(CONFIG_CPU_LOONGSON64)
/*
* MIPSR2 defines ehb for hazard avoidance
@@ -278,7 +279,8 @@ do { \
#define __disable_fpu_hazard
-#elif defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
+#elif defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \
+ defined(CONFIG_CPU_MIPSR6)
#define __enable_fpu_hazard \
___ehb
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index cf1f2a4a2418..346fffd9e972 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -30,8 +30,6 @@
#include <asm/pgtable-bits.h>
#include <asm/processor.h>
#include <asm/string.h>
-
-#include <ioremap.h>
#include <mangle-port.h>
/*
@@ -153,66 +151,9 @@ static inline void *isa_bus_to_virt(unsigned long address)
*/
#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
-extern void __iomem * __ioremap(phys_addr_t offset, phys_addr_t size, unsigned long flags);
-extern void __iounmap(const volatile void __iomem *addr);
-
-static inline void __iomem * __ioremap_mode(phys_addr_t offset, unsigned long size,
- unsigned long flags)
-{
- void __iomem *addr = plat_ioremap(offset, size, flags);
-
- if (addr)
- return addr;
-
-#define __IS_LOW512(addr) (!((phys_addr_t)(addr) & (phys_addr_t) ~0x1fffffffULL))
-
- if (cpu_has_64bit_addresses) {
- u64 base = UNCAC_BASE;
-
- /*
- * R10000 supports a 2 bit uncached attribute therefore
- * UNCAC_BASE may not equal IO_BASE.
- */
- if (flags == _CACHE_UNCACHED)
- base = (u64) IO_BASE;
- return (void __iomem *) (unsigned long) (base + offset);
- } else if (__builtin_constant_p(offset) &&
- __builtin_constant_p(size) && __builtin_constant_p(flags)) {
- phys_addr_t phys_addr, last_addr;
-
- phys_addr = fixup_bigphys_addr(offset, size);
-
- /* Don't allow wraparound or zero size. */
- last_addr = phys_addr + size - 1;
- if (!size || last_addr < phys_addr)
- return NULL;
-
- /*
- * Map uncached objects in the low 512MB of address
- * space using KSEG1.
- */
- if (__IS_LOW512(phys_addr) && __IS_LOW512(last_addr) &&
- flags == _CACHE_UNCACHED)
- return (void __iomem *)
- (unsigned long)CKSEG1ADDR(phys_addr);
- }
-
- return __ioremap(offset, size, flags);
-
-#undef __IS_LOW512
-}
-
-/*
- * ioremap_prot - map bus memory into CPU space
- * @offset: bus address of the memory
- * @size: size of the resource to map
-
- * ioremap_prot gives the caller control over cache coherency attributes (CCA)
- */
-static inline void __iomem *ioremap_prot(phys_addr_t offset,
- unsigned long size, unsigned long prot_val) {
- return __ioremap_mode(offset, size, prot_val & _CACHE_MASK);
-}
+void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
+ unsigned long prot_val);
+void iounmap(const volatile void __iomem *addr);
/*
* ioremap - map bus memory into CPU space
@@ -226,7 +167,7 @@ static inline void __iomem *ioremap_prot(phys_addr_t offset,
* address.
*/
#define ioremap(offset, size) \
- __ioremap_mode((offset), (size), _CACHE_UNCACHED)
+ ioremap_prot((offset), (size), _CACHE_UNCACHED)
#define ioremap_uc ioremap
/*
@@ -245,7 +186,7 @@ static inline void __iomem *ioremap_prot(phys_addr_t offset,
* memory-like regions on I/O busses.
*/
#define ioremap_cache(offset, size) \
- __ioremap_mode((offset), (size), _page_cachable_default)
+ ioremap_prot((offset), (size), _page_cachable_default)
/*
* ioremap_wc - map bus memory into CPU space
@@ -266,23 +207,7 @@ static inline void __iomem *ioremap_prot(phys_addr_t offset,
* _CACHE_UNCACHED option (see cpu_probe() method).
*/
#define ioremap_wc(offset, size) \
- __ioremap_mode((offset), (size), boot_cpu_data.writecombine)
-
-static inline void iounmap(const volatile void __iomem *addr)
-{
- if (plat_iounmap(addr))
- return;
-
-#define __IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1)
-
- if (cpu_has_64bit_addresses ||
- (__builtin_constant_p(addr) && __IS_KSEG1(addr)))
- return;
-
- __iounmap(addr);
-
-#undef __IS_KSEG1
-}
+ ioremap_prot((offset), (size), boot_cpu_data.writecombine)
#if defined(CONFIG_CPU_CAVIUM_OCTEON) || defined(CONFIG_CPU_LOONGSON64)
#define war_io_reorder_wmb() wmb()
diff --git a/arch/mips/include/asm/lasat/ds1603.h b/arch/mips/include/asm/lasat/ds1603.h
deleted file mode 100644
index ab833be9637d..000000000000
--- a/arch/mips/include/asm/lasat/ds1603.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/addrspace.h>
-
-/* Lasat 100 */
-#define DS1603_REG_100 (KSEG1ADDR(0x1c810000))
-#define DS1603_RST_100 (1 << 2)
-#define DS1603_CLK_100 (1 << 0)
-#define DS1603_DATA_SHIFT_100 1
-#define DS1603_DATA_100 (1 << DS1603_DATA_SHIFT_100)
-
-/* Lasat 200 */
-#define DS1603_REG_200 (KSEG1ADDR(0x11000000))
-#define DS1603_RST_200 (1 << 3)
-#define DS1603_CLK_200 (1 << 4)
-#define DS1603_DATA_200 (1 << 5)
-
-#define DS1603_DATA_REG_200 (DS1603_REG_200 + 0x10000)
-#define DS1603_DATA_READ_SHIFT_200 9
-#define DS1603_DATA_READ_200 (1 << DS1603_DATA_READ_SHIFT_200)
diff --git a/arch/mips/include/asm/lasat/eeprom.h b/arch/mips/include/asm/lasat/eeprom.h
deleted file mode 100644
index 24001a5cbb11..000000000000
--- a/arch/mips/include/asm/lasat/eeprom.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/addrspace.h>
-
-/* lasat 100 */
-#define AT93C_REG_100 KSEG1ADDR(0x1c810000)
-#define AT93C_RDATA_REG_100 AT93C_REG_100
-#define AT93C_RDATA_SHIFT_100 4
-#define AT93C_WDATA_SHIFT_100 4
-#define AT93C_CS_M_100 (1 << 5)
-#define AT93C_CLK_M_100 (1 << 3)
-
-/* lasat 200 */
-#define AT93C_REG_200 KSEG1ADDR(0x11000000)
-#define AT93C_RDATA_REG_200 (AT93C_REG_200+0x10000)
-#define AT93C_RDATA_SHIFT_200 8
-#define AT93C_WDATA_SHIFT_200 2
-#define AT93C_CS_M_200 (1 << 0)
-#define AT93C_CLK_M_200 (1 << 1)
diff --git a/arch/mips/include/asm/lasat/head.h b/arch/mips/include/asm/lasat/head.h
deleted file mode 100644
index 20b0ecedd4b5..000000000000
--- a/arch/mips/include/asm/lasat/head.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Image header stuff
- */
-#ifndef _HEAD_H
-#define _HEAD_H
-
-#define LASAT_K_MAGIC0_VAL 0xfedeabba
-#define LASAT_K_MAGIC1_VAL 0x00bedead
-
-#ifndef _LANGUAGE_ASSEMBLY
-#include <linux/types.h>
-struct bootloader_header {
- u32 magic[2];
- u32 version;
- u32 image_start;
- u32 image_size;
- u32 kernel_start;
- u32 kernel_entry;
-};
-#endif
-
-#endif /* _HEAD_H */
diff --git a/arch/mips/include/asm/lasat/lasat.h b/arch/mips/include/asm/lasat/lasat.h
deleted file mode 100644
index 483be606960d..000000000000
--- a/arch/mips/include/asm/lasat/lasat.h
+++ /dev/null
@@ -1,245 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * lasat.h
- *
- * Thomas Horsten <thh@lasat.com>
- * Copyright (C) 2000 LASAT Networks A/S.
- *
- * Configuration for LASAT boards, loads the appropriate include files.
- */
-#ifndef _LASAT_H
-#define _LASAT_H
-
-#ifndef _LANGUAGE_ASSEMBLY
-
-extern struct lasat_misc {
- volatile u32 *reset_reg;
- volatile u32 *flash_wp_reg;
- u32 flash_wp_bit;
-} *lasat_misc;
-
-enum lasat_mtdparts {
- LASAT_MTD_BOOTLOADER,
- LASAT_MTD_SERVICE,
- LASAT_MTD_NORMAL,
- LASAT_MTD_CONFIG,
- LASAT_MTD_FS,
- LASAT_MTD_LAST
-};
-
-/*
- * The format of the data record in the EEPROM.
- * See the LASAT Hardware Configuration field specification for a detailed
- * description of the config field.
- */
-#include <linux/types.h>
-
-#define LASAT_EEPROM_VERSION 7
-struct lasat_eeprom_struct {
- unsigned int version;
- unsigned int cfg[3];
- unsigned char hwaddr[6];
- unsigned char print_partno[12];
- unsigned char term0;
- unsigned char print_serial[14];
- unsigned char term1;
- unsigned char prod_partno[12];
- unsigned char term2;
- unsigned char prod_serial[14];
- unsigned char term3;
- unsigned char passwd_hash[16];
- unsigned char pwdnull;
- unsigned char vendid;
- unsigned char ts_ref;
- unsigned char ts_signoff;
- unsigned char reserved[11];
- unsigned char debugaccess;
- unsigned short prid;
- unsigned int serviceflag;
- unsigned int ipaddr;
- unsigned int netmask;
- unsigned int crc32;
-};
-
-struct lasat_eeprom_struct_pre7 {
- unsigned int version;
- unsigned int flags[3];
- unsigned char hwaddr0[6];
- unsigned char hwaddr1[6];
- unsigned char print_partno[9];
- unsigned char term0;
- unsigned char print_serial[14];
- unsigned char term1;
- unsigned char prod_partno[9];
- unsigned char term2;
- unsigned char prod_serial[14];
- unsigned char term3;
- unsigned char passwd_hash[24];
- unsigned char pwdnull;
- unsigned char vendor;
- unsigned char ts_ref;
- unsigned char ts_signoff;
- unsigned char reserved[6];
- unsigned int writecount;
- unsigned int ipaddr;
- unsigned int netmask;
- unsigned int crc32;
-};
-
-/* Configuration descriptor encoding - see the doc for details */
-
-#define LASAT_W0_DSCTYPE(v) (((v)) & 0xf)
-#define LASAT_W0_BMID(v) (((v) >> 0x04) & 0xf)
-#define LASAT_W0_CPUTYPE(v) (((v) >> 0x08) & 0xf)
-#define LASAT_W0_BUSSPEED(v) (((v) >> 0x0c) & 0xf)
-#define LASAT_W0_CPUCLK(v) (((v) >> 0x10) & 0xf)
-#define LASAT_W0_SDRAMBANKSZ(v) (((v) >> 0x14) & 0xf)
-#define LASAT_W0_SDRAMBANKS(v) (((v) >> 0x18) & 0xf)
-#define LASAT_W0_L2CACHE(v) (((v) >> 0x1c) & 0xf)
-
-#define LASAT_W1_EDHAC(v) (((v)) & 0xf)
-#define LASAT_W1_HIFN(v) (((v) >> 0x04) & 0x1)
-#define LASAT_W1_ISDN(v) (((v) >> 0x05) & 0x1)
-#define LASAT_W1_IDE(v) (((v) >> 0x06) & 0x1)
-#define LASAT_W1_HDLC(v) (((v) >> 0x07) & 0x1)
-#define LASAT_W1_USVERSION(v) (((v) >> 0x08) & 0x1)
-#define LASAT_W1_4MACS(v) (((v) >> 0x09) & 0x1)
-#define LASAT_W1_EXTSERIAL(v) (((v) >> 0x0a) & 0x1)
-#define LASAT_W1_FLASHSIZE(v) (((v) >> 0x0c) & 0xf)
-#define LASAT_W1_PCISLOTS(v) (((v) >> 0x10) & 0xf)
-#define LASAT_W1_PCI1OPT(v) (((v) >> 0x14) & 0xf)
-#define LASAT_W1_PCI2OPT(v) (((v) >> 0x18) & 0xf)
-#define LASAT_W1_PCI3OPT(v) (((v) >> 0x1c) & 0xf)
-
-/* Routines specific to LASAT boards */
-
-#define LASAT_BMID_MASQUERADE2 0
-#define LASAT_BMID_MASQUERADEPRO 1
-#define LASAT_BMID_SAFEPIPE25 2
-#define LASAT_BMID_SAFEPIPE50 3
-#define LASAT_BMID_SAFEPIPE100 4
-#define LASAT_BMID_SAFEPIPE5000 5
-#define LASAT_BMID_SAFEPIPE7000 6
-#define LASAT_BMID_SAFEPIPE1000 7
-#if 0
-#define LASAT_BMID_SAFEPIPE30 7
-#define LASAT_BMID_SAFEPIPE5100 8
-#define LASAT_BMID_SAFEPIPE7100 9
-#endif
-#define LASAT_BMID_UNKNOWN 0xf
-#define LASAT_MAX_BMID_NAMES 9 /* no larger than 15! */
-
-#define LASAT_HAS_EDHAC (1 << 0)
-#define LASAT_EDHAC_FAST (1 << 1)
-#define LASAT_HAS_EADI (1 << 2)
-#define LASAT_HAS_HIFN (1 << 3)
-#define LASAT_HAS_ISDN (1 << 4)
-#define LASAT_HAS_LEASEDLINE_IF (1 << 5)
-#define LASAT_HAS_HDC (1 << 6)
-
-#define LASAT_PRID_MASQUERADE2 0
-#define LASAT_PRID_MASQUERADEPRO 1
-#define LASAT_PRID_SAFEPIPE25 2
-#define LASAT_PRID_SAFEPIPE50 3
-#define LASAT_PRID_SAFEPIPE100 4
-#define LASAT_PRID_SAFEPIPE5000 5
-#define LASAT_PRID_SAFEPIPE7000 6
-#define LASAT_PRID_SAFEPIPE30 7
-#define LASAT_PRID_SAFEPIPE5100 8
-#define LASAT_PRID_SAFEPIPE7100 9
-
-#define LASAT_PRID_SAFEPIPE1110 10
-#define LASAT_PRID_SAFEPIPE3020 11
-#define LASAT_PRID_SAFEPIPE3030 12
-#define LASAT_PRID_SAFEPIPE5020 13
-#define LASAT_PRID_SAFEPIPE5030 14
-#define LASAT_PRID_SAFEPIPE1120 15
-#define LASAT_PRID_SAFEPIPE1130 16
-#define LASAT_PRID_SAFEPIPE6010 17
-#define LASAT_PRID_SAFEPIPE6110 18
-#define LASAT_PRID_SAFEPIPE6210 19
-#define LASAT_PRID_SAFEPIPE1020 20
-#define LASAT_PRID_SAFEPIPE1040 21
-#define LASAT_PRID_SAFEPIPE1060 22
-
-struct lasat_info {
- unsigned int li_cpu_hz;
- unsigned int li_bus_hz;
- unsigned int li_bmid;
- unsigned int li_memsize;
- unsigned int li_flash_size;
- unsigned int li_prid;
- unsigned char li_bmstr[16];
- unsigned char li_namestr[32];
- unsigned char li_typestr[16];
- /* Info on the Flash layout */
- unsigned int li_flash_base;
- unsigned long li_flashpart_base[LASAT_MTD_LAST];
- unsigned long li_flashpart_size[LASAT_MTD_LAST];
- struct lasat_eeprom_struct li_eeprom_info;
- unsigned int li_eeprom_upgrade_version;
- unsigned int li_debugaccess;
-};
-
-extern struct lasat_info lasat_board_info;
-
-static inline unsigned long lasat_flash_partition_start(int partno)
-{
- if (partno < 0 || partno >= LASAT_MTD_LAST)
- return 0;
-
- return lasat_board_info.li_flashpart_base[partno];
-}
-
-static inline unsigned long lasat_flash_partition_size(int partno)
-{
- if (partno < 0 || partno >= LASAT_MTD_LAST)
- return 0;
-
- return lasat_board_info.li_flashpart_size[partno];
-}
-
-/* Called from setup() to initialize the global board_info struct */
-extern int lasat_init_board_info(void);
-
-/* Write the modified EEPROM info struct */
-extern void lasat_write_eeprom_info(void);
-
-#define N_MACHTYPES 2
-/* for calibration of delays */
-
-/* the lasat_ndelay function is necessary because it is used at an
- * early stage of the boot process where ndelay is not calibrated.
- * It is used for the bit-banging rtc and eeprom drivers */
-
-#include <linux/delay.h>
-#include <linux/smp.h>
-
-/* calculating with the slowest board with 100 MHz clock */
-#define LASAT_100_DIVIDER 20
-/* All 200's run at 250 MHz clock */
-#define LASAT_200_DIVIDER 8
-
-extern unsigned int lasat_ndelay_divider;
-
-static inline void lasat_ndelay(unsigned int ns)
-{
- __delay(ns / lasat_ndelay_divider);
-}
-
-#define IS_LASAT_200() (current_cpu_data.cputype == CPU_R5000)
-
-#endif /* !defined (_LANGUAGE_ASSEMBLY) */
-
-#define LASAT_SERVICEMODE_MAGIC_1 0xdeadbeef
-#define LASAT_SERVICEMODE_MAGIC_2 0xfedeabba
-
-/* Lasat 100 boards */
-#define LASAT_GT_BASE (KSEG1ADDR(0x14000000))
-
-/* Lasat 200 boards */
-#define Vrc5074_PHYS_BASE 0x1fa00000
-#define Vrc5074_BASE (KSEG1ADDR(Vrc5074_PHYS_BASE))
-#define PCI_WINDOW1 0x1a000000
-
-#endif /* _LASAT_H */
diff --git a/arch/mips/include/asm/lasat/lasatint.h b/arch/mips/include/asm/lasat/lasatint.h
deleted file mode 100644
index b2b346e0ca38..000000000000
--- a/arch/mips/include/asm/lasat/lasatint.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_LASAT_LASATINT_H
-#define __ASM_LASAT_LASATINT_H
-
-/* lasat 100 */
-#define LASAT_INT_STATUS_REG_100 (KSEG1ADDR(0x1c880000))
-#define LASAT_INT_MASK_REG_100 (KSEG1ADDR(0x1c890000))
-#define LASATINT_MASK_SHIFT_100 0
-
-/* lasat 200 */
-#define LASAT_INT_STATUS_REG_200 (KSEG1ADDR(0x1104003c))
-#define LASAT_INT_MASK_REG_200 (KSEG1ADDR(0x1104003c))
-#define LASATINT_MASK_SHIFT_200 16
-
-#endif /* __ASM_LASAT_LASATINT_H */
diff --git a/arch/mips/include/asm/lasat/picvue.h b/arch/mips/include/asm/lasat/picvue.h
deleted file mode 100644
index 99987c5a4b83..000000000000
--- a/arch/mips/include/asm/lasat/picvue.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Lasat 100 */
-#define PVC_REG_100 KSEG1ADDR(0x1c820000)
-#define PVC_DATA_SHIFT_100 0
-#define PVC_DATA_M_100 0xFF
-#define PVC_E_100 (1 << 8)
-#define PVC_RW_100 (1 << 9)
-#define PVC_RS_100 (1 << 10)
-
-/* Lasat 200 */
-#define PVC_REG_200 KSEG1ADDR(0x11000000)
-#define PVC_DATA_SHIFT_200 24
-#define PVC_DATA_M_200 (0xFF << PVC_DATA_SHIFT_200)
-#define PVC_E_200 (1 << 16)
-#define PVC_RW_200 (1 << 17)
-#define PVC_RS_200 (1 << 18)
diff --git a/arch/mips/include/asm/lasat/serial.h b/arch/mips/include/asm/lasat/serial.h
deleted file mode 100644
index 7b43d74089d1..000000000000
--- a/arch/mips/include/asm/lasat/serial.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/lasat/lasat.h>
-
-/* Lasat 100 boards serial configuration */
-#define LASAT_BASE_BAUD_100 (7372800 / 16)
-#define LASAT_UART_REGS_BASE_100 0x1c8b0000
-#define LASAT_UART_REGS_SHIFT_100 2
-#define LASATINT_UART_100 16
-
-/* * LASAT 200 boards serial configuration */
-#define LASAT_BASE_BAUD_200 (100000000 / 16 / 12)
-#define LASAT_UART_REGS_BASE_200 (Vrc5074_PHYS_BASE + 0x0300)
-#define LASAT_UART_REGS_SHIFT_200 3
-#define LASATINT_UART_200 21
diff --git a/arch/mips/include/asm/maar.h b/arch/mips/include/asm/maar.h
index 6908b93c4ff9..99f1c3e4b11f 100644
--- a/arch/mips/include/asm/maar.h
+++ b/arch/mips/include/asm/maar.h
@@ -32,7 +32,7 @@ unsigned platform_maar_init(unsigned num_pairs);
* @upper: The highest address that the MAAR pair will affect. Must be
* aligned to one byte before a 2^16 byte boundary.
* @attrs: The accessibility attributes to program, eg. MIPS_MAAR_S. The
- * MIPS_MAAR_VL attribute will automatically be set.
+ * MIPS_MAAR_VL/MIPS_MAAR_VH attributes will automatically be set.
*
* Program the pair of MAAR registers specified by idx to apply the attributes
* specified by attrs to the range of addresses from lower to higher.
@@ -48,17 +48,30 @@ static inline void write_maar_pair(unsigned idx, phys_addr_t lower,
/* Automatically set MIPS_MAAR_VL */
attrs |= MIPS_MAAR_VL;
- /* Write the upper address & attributes (only MIPS_MAAR_VL matters) */
+ /*
+ * Write the upper address & attributes (both MIPS_MAAR_VL and
+ * MIPS_MAAR_VH matter)
+ */
write_c0_maari(idx << 1);
back_to_back_c0_hazard();
write_c0_maar(((upper >> 4) & MIPS_MAAR_ADDR) | attrs);
back_to_back_c0_hazard();
+#ifdef CONFIG_XPA
+ upper >>= MIPS_MAARX_ADDR_SHIFT;
+ writex_c0_maar(((upper >> 4) & MIPS_MAARX_ADDR) | MIPS_MAARX_VH);
+ back_to_back_c0_hazard();
+#endif
/* Write the lower address & attributes */
write_c0_maari((idx << 1) | 0x1);
back_to_back_c0_hazard();
write_c0_maar((lower >> 4) | attrs);
back_to_back_c0_hazard();
+#ifdef CONFIG_XPA
+ lower >>= MIPS_MAARX_ADDR_SHIFT;
+ writex_c0_maar(((lower >> 4) & MIPS_MAARX_ADDR) | MIPS_MAARX_VH);
+ back_to_back_c0_hazard();
+#endif
}
/**
diff --git a/arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h
index 95a0b580909d..a54f20d956a2 100644
--- a/arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h
@@ -56,6 +56,5 @@
#define cpu_has_64bits 0
#define cpu_has_64bit_zero_reg 0
#define cpu_has_64bit_gp_regs 0
-#define cpu_has_64bit_addresses 0
#endif /* __ASM_MACH_ATH25_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
index e7c972fccd9f..79ab3ad9fee8 100644
--- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
@@ -45,7 +45,6 @@
#define cpu_has_64bits 0
#define cpu_has_64bit_zero_reg 0
#define cpu_has_64bit_gp_regs 0
-#define cpu_has_64bit_addresses 0
#define cpu_dcache_line_size() 32
#define cpu_icache_line_size() 32
diff --git a/arch/mips/include/asm/mach-au1x00/ioremap.h b/arch/mips/include/asm/mach-au1x00/ioremap.h
deleted file mode 100644
index f6877ed8b8d0..000000000000
--- a/arch/mips/include/asm/mach-au1x00/ioremap.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * include/asm-mips/mach-au1x00/ioremap.h
- */
-#ifndef __ASM_MACH_AU1X00_IOREMAP_H
-#define __ASM_MACH_AU1X00_IOREMAP_H
-
-#include <linux/types.h>
-
-#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_PCI)
-extern phys_addr_t __fixup_bigphys_addr(phys_addr_t, phys_addr_t);
-#else
-static inline phys_addr_t __fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
-{
- return phys_addr;
-}
-#endif
-
-/*
- * Allow physical addresses to be fixed up to help 36-bit peripherals.
- */
-static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
-{
- return __fixup_bigphys_addr(phys_addr, size);
-}
-
-static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size,
- unsigned long flags)
-{
- return NULL;
-}
-
-static inline int plat_iounmap(const volatile void __iomem *addr)
-{
- return 0;
-}
-
-#endif /* __ASM_MACH_AU1X00_IOREMAP_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
index 8fe88c2251e4..9212429d5edd 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
@@ -13,16 +13,16 @@ static inline unsigned long bcm63xx_gpio_count(void)
case BCM6328_CPU_ID:
return 32;
case BCM3368_CPU_ID:
- case BCM6358_CPU_ID:
return 40;
case BCM6338_CPU_ID:
return 8;
case BCM6345_CPU_ID:
return 16;
- case BCM6362_CPU_ID:
- return 48;
+ case BCM6358_CPU_ID:
case BCM6368_CPU_ID:
return 38;
+ case BCM6362_CPU_ID:
+ return 48;
case BCM6348_CPU_ID:
default:
return 37;
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
index bc3444cd4ef2..9ceb5e72889f 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
@@ -1367,8 +1367,8 @@
#define MISC_STRAPBUS_6328_REG 0x240
#define STRAPBUS_6328_FCVO_SHIFT 7
#define STRAPBUS_6328_FCVO_MASK (0x1f << STRAPBUS_6328_FCVO_SHIFT)
-#define STRAPBUS_6328_BOOT_SEL_SERIAL (1 << 28)
-#define STRAPBUS_6328_BOOT_SEL_NAND (0 << 28)
+#define STRAPBUS_6328_BOOT_SEL_SERIAL (1 << 18)
+#define STRAPBUS_6328_BOOT_SEL_NAND (0 << 18)
/*************************************************************************
* _REG relative to RSET_PCIE
diff --git a/arch/mips/include/asm/mach-bcm63xx/ioremap.h b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
index 8cd261ec0a75..73f31825bbf3 100644
--- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
+++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
@@ -4,11 +4,6 @@
#include <bcm63xx_cpu.h>
-static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
-{
- return phys_addr;
-}
-
static inline int is_bcm63xx_internal_registers(phys_addr_t offset)
{
switch (bcm63xx_get_cpu_id()) {
diff --git a/arch/mips/include/asm/mach-bmips/ioremap.h b/arch/mips/include/asm/mach-bmips/ioremap.h
index 52632ebc705f..63b4af9916b6 100644
--- a/arch/mips/include/asm/mach-bmips/ioremap.h
+++ b/arch/mips/include/asm/mach-bmips/ioremap.h
@@ -4,11 +4,6 @@
#include <linux/types.h>
-static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
-{
- return phys_addr;
-}
-
static inline int is_bmips_internal_registers(phys_addr_t offset)
{
if (offset >= 0xfff80000)
diff --git a/arch/mips/include/asm/mach-emma2rh/irq.h b/arch/mips/include/asm/mach-emma2rh/irq.h
deleted file mode 100644
index d32736736bb3..000000000000
--- a/arch/mips/include/asm/mach-emma2rh/irq.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003 by Ralf Baechle
- */
-#ifndef __ASM_MACH_EMMA2RH_IRQ_H
-#define __ASM_MACH_EMMA2RH_IRQ_H
-
-#define NR_IRQS 256
-
-#include <asm/mach-generic/irq.h>
-
-#endif /* __ASM_MACH_EMMA2RH_IRQ_H */
diff --git a/arch/mips/include/asm/mach-generic/ioremap.h b/arch/mips/include/asm/mach-generic/ioremap.h
index 4e36ea25ed33..f2442b84545c 100644
--- a/arch/mips/include/asm/mach-generic/ioremap.h
+++ b/arch/mips/include/asm/mach-generic/ioremap.h
@@ -7,15 +7,6 @@
#include <linux/types.h>
-/*
- * Allow physical addresses to be fixed up to help peripherals located
- * outside the low 32-bit range -- generic pass-through version.
- */
-static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
-{
- return phys_addr;
-}
-
static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size,
unsigned long flags)
{
diff --git a/arch/mips/include/asm/mach-generic/irq.h b/arch/mips/include/asm/mach-generic/irq.h
index be546a0f65fa..72ac2c202c55 100644
--- a/arch/mips/include/asm/mach-generic/irq.h
+++ b/arch/mips/include/asm/mach-generic/irq.h
@@ -36,10 +36,4 @@
#endif /* CONFIG_IRQ_MIPS_CPU */
-#ifdef CONFIG_MIPS_GIC
-#ifndef MIPS_GIC_IRQ_BASE
-#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8)
-#endif
-#endif /* CONFIG_MIPS_GIC */
-
#endif /* __ASM_MACH_GENERIC_IRQ_H */
diff --git a/arch/mips/include/asm/mach-ip27/spaces.h b/arch/mips/include/asm/mach-ip27/spaces.h
index 24d5e31bcfa6..66421e9a6aa6 100644
--- a/arch/mips/include/asm/mach-ip27/spaces.h
+++ b/arch/mips/include/asm/mach-ip27/spaces.h
@@ -10,17 +10,19 @@
#ifndef _ASM_MACH_IP27_SPACES_H
#define _ASM_MACH_IP27_SPACES_H
+#include <linux/const.h>
+
/*
* IP27 uses the R10000's uncached attribute feature. Attribute 3 selects
* uncached memory addressing. Hide the definitions on 32-bit compilation
* of the compat-vdso code.
*/
#ifdef CONFIG_64BIT
-#define HSPEC_BASE 0x9000000000000000
-#define IO_BASE 0x9200000000000000
-#define MSPEC_BASE 0x9400000000000000
-#define UNCAC_BASE 0x9600000000000000
-#define CAC_BASE 0xa800000000000000
+#define HSPEC_BASE _AC(0x9000000000000000, UL)
+#define IO_BASE _AC(0x9200000000000000, UL)
+#define MSPEC_BASE _AC(0x9400000000000000, UL)
+#define UNCAC_BASE _AC(0x9600000000000000, UL)
+#define CAC_BASE _AC(0xa800000000000000, UL)
#endif
#define TO_MSPEC(x) (MSPEC_BASE | ((x) & TO_PHYS_MASK))
diff --git a/arch/mips/include/asm/mach-ip30/war.h b/arch/mips/include/asm/mach-ip30/war.h
index a98ba204f183..a1fa0c1f5300 100644
--- a/arch/mips/include/asm/mach-ip30/war.h
+++ b/arch/mips/include/asm/mach-ip30/war.h
@@ -8,19 +8,17 @@
#define R4600_V1_INDEX_ICACHEOP_WAR 0
#define R4600_V1_HIT_CACHEOP_WAR 0
#define R4600_V2_HIT_CACHEOP_WAR 0
-#define MIPS_CACHE_SYNC_WAR 0
#define BCM1250_M3_WAR 0
#define SIBYTE_1956_WAR 0
#define MIPS4K_ICACHE_REFILL_WAR 0
-#define MIPS34K_MISSED_ITLB_WAR 0
-#define R5432_CP0_INTERRUPT_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
#define TX49XX_ICACHE_INDEX_INV_WAR 0
#define ICACHE_REFILLS_WORKAROUND_WAR 0
-
#ifdef CONFIG_CPU_R10000
#define R10000_LLSC_WAR 1
#else
#define R10000_LLSC_WAR 0
#endif
+#define MIPS34K_MISSED_ITLB_WAR 0
#endif /* __ASM_MIPS_MACH_IP30_WAR_H */
diff --git a/arch/mips/include/asm/mach-jz4740/base.h b/arch/mips/include/asm/mach-jz4740/base.h
deleted file mode 100644
index 96b2d6674cdb..000000000000
--- a/arch/mips/include/asm/mach-jz4740/base.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_JZ4740_BASE_H__
-#define __ASM_MACH_JZ4740_BASE_H__
-
-#define JZ4740_CPM_BASE_ADDR 0x10000000
-#define JZ4740_INTC_BASE_ADDR 0x10001000
-#define JZ4740_WDT_BASE_ADDR 0x10002000
-#define JZ4740_TCU_BASE_ADDR 0x10002010
-#define JZ4740_RTC_BASE_ADDR 0x10003000
-#define JZ4740_GPIO_BASE_ADDR 0x10010000
-#define JZ4740_AIC_BASE_ADDR 0x10020000
-#define JZ4740_MSC_BASE_ADDR 0x10021000
-#define JZ4740_UART0_BASE_ADDR 0x10030000
-#define JZ4740_UART1_BASE_ADDR 0x10031000
-#define JZ4740_I2C_BASE_ADDR 0x10042000
-#define JZ4740_SSI_BASE_ADDR 0x10043000
-#define JZ4740_SADC_BASE_ADDR 0x10070000
-#define JZ4740_EMC_BASE_ADDR 0x13010000
-#define JZ4740_DMAC_BASE_ADDR 0x13020000
-#define JZ4740_UHC_BASE_ADDR 0x13030000
-#define JZ4740_UDC_BASE_ADDR 0x13040000
-#define JZ4740_LCD_BASE_ADDR 0x13050000
-#define JZ4740_SLCD_BASE_ADDR 0x13050000
-#define JZ4740_CIM_BASE_ADDR 0x13060000
-#define JZ4740_IPU_BASE_ADDR 0x13080000
-
-#endif
diff --git a/arch/mips/include/asm/mach-jz4740/dma.h b/arch/mips/include/asm/mach-jz4740/dma.h
deleted file mode 100644
index e5d2a5311a3a..000000000000
--- a/arch/mips/include/asm/mach-jz4740/dma.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- * JZ7420/JZ4740 DMA definitions
- */
-
-#ifndef __ASM_MACH_JZ4740_DMA_H__
-#define __ASM_MACH_JZ4740_DMA_H__
-
-enum jz4740_dma_request_type {
- JZ4740_DMA_TYPE_AUTO_REQUEST = 8,
- JZ4740_DMA_TYPE_UART_TRANSMIT = 20,
- JZ4740_DMA_TYPE_UART_RECEIVE = 21,
- JZ4740_DMA_TYPE_SPI_TRANSMIT = 22,
- JZ4740_DMA_TYPE_SPI_RECEIVE = 23,
- JZ4740_DMA_TYPE_MMC_TRANSMIT = 26,
- JZ4740_DMA_TYPE_MMC_RECEIVE = 27,
- JZ4740_DMA_TYPE_TCU = 28,
- JZ4740_DMA_TYPE_SADC = 29,
- JZ4740_DMA_TYPE_SLCD = 30,
-};
-
-#endif /* __ASM_JZ4740_DMA_H__ */
diff --git a/arch/mips/include/asm/mach-jz4740/irq.h b/arch/mips/include/asm/mach-jz4740/irq.h
index 09c38eac671a..27c543bd340f 100644
--- a/arch/mips/include/asm/mach-jz4740/irq.h
+++ b/arch/mips/include/asm/mach-jz4740/irq.h
@@ -8,49 +8,6 @@
#define __ASM_MACH_JZ4740_IRQ_H__
#define MIPS_CPU_IRQ_BASE 0
-#define JZ4740_IRQ_BASE 8
-
-#ifdef CONFIG_MACH_JZ4740
-# define NR_INTC_IRQS 32
-#else
-# define NR_INTC_IRQS 64
-#endif
-
-/* 1st-level interrupts */
-#define JZ4740_IRQ(x) (JZ4740_IRQ_BASE + (x))
-#define JZ4740_IRQ_I2C JZ4740_IRQ(1)
-#define JZ4740_IRQ_UHC JZ4740_IRQ(3)
-#define JZ4740_IRQ_UART1 JZ4740_IRQ(8)
-#define JZ4740_IRQ_UART0 JZ4740_IRQ(9)
-#define JZ4740_IRQ_SADC JZ4740_IRQ(12)
-#define JZ4740_IRQ_MSC JZ4740_IRQ(14)
-#define JZ4740_IRQ_RTC JZ4740_IRQ(15)
-#define JZ4740_IRQ_SSI JZ4740_IRQ(16)
-#define JZ4740_IRQ_CIM JZ4740_IRQ(17)
-#define JZ4740_IRQ_AIC JZ4740_IRQ(18)
-#define JZ4740_IRQ_ETH JZ4740_IRQ(19)
-#define JZ4740_IRQ_DMAC JZ4740_IRQ(20)
-#define JZ4740_IRQ_TCU2 JZ4740_IRQ(21)
-#define JZ4740_IRQ_TCU1 JZ4740_IRQ(22)
-#define JZ4740_IRQ_TCU0 JZ4740_IRQ(23)
-#define JZ4740_IRQ_UDC JZ4740_IRQ(24)
-#define JZ4740_IRQ_GPIO3 JZ4740_IRQ(25)
-#define JZ4740_IRQ_GPIO2 JZ4740_IRQ(26)
-#define JZ4740_IRQ_GPIO1 JZ4740_IRQ(27)
-#define JZ4740_IRQ_GPIO0 JZ4740_IRQ(28)
-#define JZ4740_IRQ_IPU JZ4740_IRQ(29)
-#define JZ4740_IRQ_LCD JZ4740_IRQ(30)
-
-#define JZ4780_IRQ_TCU2 JZ4740_IRQ(25)
-
-/* 2nd-level interrupts */
-#define JZ4740_IRQ_DMA(x) (JZ4740_IRQ(NR_INTC_IRQS) + (x))
-
-#define JZ4740_IRQ_INTC_GPIO(x) (JZ4740_IRQ_GPIO0 - (x))
-#define JZ4740_IRQ_GPIO(x) (JZ4740_IRQ(NR_INTC_IRQS + 16) + (x))
-
-#define JZ4740_IRQ_ADC_BASE JZ4740_IRQ(NR_INTC_IRQS + 144)
-
-#define NR_IRQS (JZ4740_IRQ_ADC_BASE + 6)
+#define NR_IRQS 256
#endif
diff --git a/arch/mips/include/asm/mach-jz4740/timer.h b/arch/mips/include/asm/mach-jz4740/timer.h
deleted file mode 100644
index 8a19cfe5bed7..000000000000
--- a/arch/mips/include/asm/mach-jz4740/timer.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- * JZ4740 platform timer support
- */
-
-#ifndef __ASM_MACH_JZ4740_TIMER
-#define __ASM_MACH_JZ4740_TIMER
-
-#define JZ_REG_TIMER_STOP 0x0C
-#define JZ_REG_TIMER_STOP_SET 0x1C
-#define JZ_REG_TIMER_STOP_CLEAR 0x2C
-#define JZ_REG_TIMER_ENABLE 0x00
-#define JZ_REG_TIMER_ENABLE_SET 0x04
-#define JZ_REG_TIMER_ENABLE_CLEAR 0x08
-#define JZ_REG_TIMER_FLAG 0x10
-#define JZ_REG_TIMER_FLAG_SET 0x14
-#define JZ_REG_TIMER_FLAG_CLEAR 0x18
-#define JZ_REG_TIMER_MASK 0x20
-#define JZ_REG_TIMER_MASK_SET 0x24
-#define JZ_REG_TIMER_MASK_CLEAR 0x28
-
-#define JZ_REG_TIMER_DFR(x) (((x) * 0x10) + 0x30)
-#define JZ_REG_TIMER_DHR(x) (((x) * 0x10) + 0x34)
-#define JZ_REG_TIMER_CNT(x) (((x) * 0x10) + 0x38)
-#define JZ_REG_TIMER_CTRL(x) (((x) * 0x10) + 0x3C)
-
-#define JZ_TIMER_IRQ_HALF(x) BIT((x) + 0x10)
-#define JZ_TIMER_IRQ_FULL(x) BIT(x)
-
-#define JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN BIT(9)
-#define JZ_TIMER_CTRL_PWM_ACTIVE_LOW BIT(8)
-#define JZ_TIMER_CTRL_PWM_ENABLE BIT(7)
-#define JZ_TIMER_CTRL_PRESCALE_MASK 0x1c
-#define JZ_TIMER_CTRL_PRESCALE_OFFSET 0x3
-#define JZ_TIMER_CTRL_PRESCALE_1 (0 << 3)
-#define JZ_TIMER_CTRL_PRESCALE_4 (1 << 3)
-#define JZ_TIMER_CTRL_PRESCALE_16 (2 << 3)
-#define JZ_TIMER_CTRL_PRESCALE_64 (3 << 3)
-#define JZ_TIMER_CTRL_PRESCALE_256 (4 << 3)
-#define JZ_TIMER_CTRL_PRESCALE_1024 (5 << 3)
-
-#define JZ_TIMER_CTRL_PRESCALER(x) ((x) << JZ_TIMER_CTRL_PRESCALE_OFFSET)
-
-#define JZ_TIMER_CTRL_SRC_EXT BIT(2)
-#define JZ_TIMER_CTRL_SRC_RTC BIT(1)
-#define JZ_TIMER_CTRL_SRC_PCLK BIT(0)
-
-extern void __iomem *jz4740_timer_base;
-void __init jz4740_timer_init(void);
-
-void jz4740_timer_enable_watchdog(void);
-void jz4740_timer_disable_watchdog(void);
-
-static inline void jz4740_timer_stop(unsigned int timer)
-{
- writel(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_STOP_SET);
-}
-
-static inline void jz4740_timer_start(unsigned int timer)
-{
- writel(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_STOP_CLEAR);
-}
-
-static inline bool jz4740_timer_is_enabled(unsigned int timer)
-{
- return readb(jz4740_timer_base + JZ_REG_TIMER_ENABLE) & BIT(timer);
-}
-
-static inline void jz4740_timer_enable(unsigned int timer)
-{
- writeb(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_ENABLE_SET);
-}
-
-static inline void jz4740_timer_disable(unsigned int timer)
-{
- writeb(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_ENABLE_CLEAR);
-}
-
-static inline void jz4740_timer_set_period(unsigned int timer, uint16_t period)
-{
- writew(period, jz4740_timer_base + JZ_REG_TIMER_DFR(timer));
-}
-
-static inline void jz4740_timer_set_duty(unsigned int timer, uint16_t duty)
-{
- writew(duty, jz4740_timer_base + JZ_REG_TIMER_DHR(timer));
-}
-
-static inline void jz4740_timer_set_count(unsigned int timer, uint16_t count)
-{
- writew(count, jz4740_timer_base + JZ_REG_TIMER_CNT(timer));
-}
-
-static inline uint16_t jz4740_timer_get_count(unsigned int timer)
-{
- return readw(jz4740_timer_base + JZ_REG_TIMER_CNT(timer));
-}
-
-static inline void jz4740_timer_ack_full(unsigned int timer)
-{
- writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_FLAG_CLEAR);
-}
-
-static inline void jz4740_timer_irq_full_enable(unsigned int timer)
-{
- writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_FLAG_CLEAR);
- writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_MASK_CLEAR);
-}
-
-static inline void jz4740_timer_irq_full_disable(unsigned int timer)
-{
- writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_MASK_SET);
-}
-
-static inline void jz4740_timer_set_ctrl(unsigned int timer, uint16_t ctrl)
-{
- writew(ctrl, jz4740_timer_base + JZ_REG_TIMER_CTRL(timer));
-}
-
-static inline uint16_t jz4740_timer_get_ctrl(unsigned int timer)
-{
- return readw(jz4740_timer_base + JZ_REG_TIMER_CTRL(timer));
-}
-
-#endif
diff --git a/arch/mips/include/asm/mach-lantiq/falcon/cpu-feature-overrides.h b/arch/mips/include/asm/mach-lantiq/falcon/cpu-feature-overrides.h
index f03c1c42dd90..10226976f7b7 100644
--- a/arch/mips/include/asm/mach-lantiq/falcon/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-lantiq/falcon/cpu-feature-overrides.h
@@ -46,7 +46,6 @@
#define cpu_has_64bits 0
#define cpu_has_64bit_zero_reg 0
#define cpu_has_64bit_gp_regs 0
-#define cpu_has_64bit_addresses 0
#define cpu_dcache_line_size() 32
#define cpu_icache_line_size() 32
diff --git a/arch/mips/include/asm/mach-lasat/irq.h b/arch/mips/include/asm/mach-lasat/irq.h
deleted file mode 100644
index e8994921779e..000000000000
--- a/arch/mips/include/asm/mach-lasat/irq.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_MACH_LASAT_IRQ_H
-#define _ASM_MACH_LASAT_IRQ_H
-
-#define LASAT_CASCADE_IRQ (MIPS_CPU_IRQ_BASE + 2)
-
-#define LASAT_IRQ_BASE 8
-#define LASAT_IRQ_END 23
-
-#define NR_IRQS 24
-
-#include <asm/mach-generic/irq.h>
-
-#endif /* _ASM_MACH_LASAT_IRQ_H */
diff --git a/arch/mips/include/asm/mach-lasat/mach-gt64120.h b/arch/mips/include/asm/mach-lasat/mach-gt64120.h
deleted file mode 100644
index 6666a8871a23..000000000000
--- a/arch/mips/include/asm/mach-lasat/mach-gt64120.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * This is a direct copy of the ev96100.h file, with a global
- * search and replace. The numbers are the same.
- *
- * The reason I'm duplicating this is so that the 64120/96100
- * defines won't be confusing in the source code.
- */
-#ifndef _ASM_GT64120_LASAT_GT64120_DEP_H
-#define _ASM_GT64120_LASAT_GT64120_DEP_H
-
-/*
- * GT64120 config space base address on Lasat 100
- */
-#define GT64120_BASE (KSEG1ADDR(0x14000000))
-
-/*
- * PCI Bus allocation
- *
- * (Guessing ...)
- */
-#define GT_PCI_MEM_BASE 0x12000000UL
-#define GT_PCI_MEM_SIZE 0x02000000UL
-#define GT_PCI_IO_BASE 0x10000000UL
-#define GT_PCI_IO_SIZE 0x02000000UL
-#define GT_ISA_IO_BASE PCI_IO_BASE
-
-#endif /* _ASM_GT64120_LASAT_GT64120_DEP_H */
diff --git a/arch/mips/include/asm/mach-loongson2ef/loongson.h b/arch/mips/include/asm/mach-loongson2ef/loongson.h
index 5008af0a1a19..57e571128489 100644
--- a/arch/mips/include/asm/mach-loongson2ef/loongson.h
+++ b/arch/mips/include/asm/mach-loongson2ef/loongson.h
@@ -244,6 +244,7 @@ static inline void do_perfcnt_IRQ(void)
#ifdef CONFIG_CPU_SUPPORTS_CPUFREQ
#include <linux/cpufreq.h>
extern struct cpufreq_frequency_table loongson2_clockmod_table[];
+extern int loongson2_cpu_set_rate(unsigned long rate_khz);
#endif
/*
diff --git a/arch/mips/include/asm/mach-loongson64/boot_param.h b/arch/mips/include/asm/mach-loongson64/boot_param.h
index 2ed483e32d8c..b35be709f9da 100644
--- a/arch/mips/include/asm/mach-loongson64/boot_param.h
+++ b/arch/mips/include/asm/mach-loongson64/boot_param.h
@@ -192,6 +192,11 @@ struct boot_params {
struct efi_reset_system_t reset_system;
};
+enum loongson_bridge_type {
+ LS7A = 1,
+ RS780E = 2
+};
+
struct loongson_system_configuration {
u32 nr_cpus;
u32 nr_nodes;
@@ -200,6 +205,7 @@ struct loongson_system_configuration {
u16 boot_cpu_id;
u16 reserved_cpus_mask;
enum loongson_cpu_type cputype;
+ enum loongson_bridge_type bridgetype;
u64 ht_control_base;
u64 pci_mem_start_addr;
u64 pci_mem_end_addr;
@@ -215,9 +221,14 @@ struct loongson_system_configuration {
u32 nr_sensors;
struct sensor_device sensors[MAX_SENSORS];
u64 workarounds;
+ void (*early_config)(void);
};
extern struct efi_memory_map_loongson *loongson_memmap;
extern struct loongson_system_configuration loongson_sysconf;
+extern u32 node_id_offset;
+extern void ls7a_early_config(void);
+extern void rs780e_early_config(void);
+
#endif
diff --git a/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h b/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h
index 4fab38c743dd..b6e9c99b85a5 100644
--- a/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h
@@ -48,5 +48,6 @@
#define cpu_hwrena_impl_bits 0xc0000000
#define cpu_has_mac2008_only 1
#define cpu_has_mips_r2_exec_hazard 0
+#define cpu_has_perf_cntr_intr_bit 0
#endif /* __ASM_MACH_LOONGSON64_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-loongson64/cpucfg-emul.h b/arch/mips/include/asm/mach-loongson64/cpucfg-emul.h
new file mode 100644
index 000000000000..d64af19c210d
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson64/cpucfg-emul.h
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_MACH_LOONGSON64_CPUCFG_EMUL_H_
+#define _ASM_MACH_LOONGSON64_CPUCFG_EMUL_H_
+
+#include <asm/cpu-info.h>
+
+#ifdef CONFIG_CPU_LOONGSON3_CPUCFG_EMULATION
+
+#include <loongson_regs.h>
+
+#define LOONGSON_FPREV_MASK 0x7
+
+void loongson3_cpucfg_synthesize_data(struct cpuinfo_mips *c);
+
+static inline bool loongson3_cpucfg_emulation_enabled(struct cpuinfo_mips *c)
+{
+ /* All supported cores have non-zero LOONGSON_CFG1 data. */
+ return c->loongson3_cpucfg_data[0] != 0;
+}
+
+static inline u32 loongson3_cpucfg_read_synthesized(struct cpuinfo_mips *c,
+ __u64 sel)
+{
+ switch (sel) {
+ case LOONGSON_CFG0:
+ return c->processor_id;
+ case LOONGSON_CFG1:
+ case LOONGSON_CFG2:
+ case LOONGSON_CFG3:
+ return c->loongson3_cpucfg_data[sel - 1];
+ case LOONGSON_CFG4:
+ case LOONGSON_CFG5:
+ /* CPUCFG selects 4 and 5 are related to the input clock
+ * signal.
+ *
+ * Unimplemented for now.
+ */
+ return 0;
+ case LOONGSON_CFG6:
+ /* CPUCFG select 6 is for the undocumented Safe Extension. */
+ return 0;
+ case LOONGSON_CFG7:
+ /* CPUCFG select 7 is for the virtualization extension.
+ * We don't know if the two currently known features are
+ * supported on older cores according to the public
+ * documentation, so leave this at zero.
+ */
+ return 0;
+ }
+
+ /*
+ * Return 0 for unrecognized CPUCFG selects, which is real hardware
+ * behavior observed on Loongson 3A R4.
+ */
+ return 0;
+}
+#else
+static inline void loongson3_cpucfg_synthesize_data(struct cpuinfo_mips *c)
+{
+}
+
+static inline bool loongson3_cpucfg_emulation_enabled(struct cpuinfo_mips *c)
+{
+ return false;
+}
+
+static inline u32 loongson3_cpucfg_read_synthesized(struct cpuinfo_mips *c,
+ __u64 sel)
+{
+ return 0;
+}
+#endif
+
+#endif /* _ASM_MACH_LOONGSON64_CPUCFG_EMUL_H_ */
diff --git a/arch/mips/include/asm/mach-loongson64/loongson_regs.h b/arch/mips/include/asm/mach-loongson64/loongson_regs.h
index 363a47a5d26e..83dbb9fdf9c2 100644
--- a/arch/mips/include/asm/mach-loongson64/loongson_regs.h
+++ b/arch/mips/include/asm/mach-loongson64/loongson_regs.h
@@ -67,6 +67,8 @@ static inline u32 read_cpucfg(u32 reg)
#define LOONGSON_CFG1_SFBP BIT(29)
#define LOONGSON_CFG1_CDMAP BIT(30)
+#define LOONGSON_CFG1_FPREV_OFFSET 1
+
#define LOONGSON_CFG2 0x2
#define LOONGSON_CFG2_LEXT1 BIT(0)
#define LOONGSON_CFG2_LEXT2 BIT(1)
@@ -77,12 +79,12 @@ static inline u32 read_cpucfg(u32 reg)
#define LOONGSON_CFG2_LBT3 BIT(6)
#define LOONGSON_CFG2_LBTMMU BIT(7)
#define LOONGSON_CFG2_LPMP BIT(8)
-#define LOONGSON_CFG2_LPMPREV GENMASK(11, 9)
+#define LOONGSON_CFG2_LPMREV GENMASK(11, 9)
#define LOONGSON_CFG2_LAMO BIT(12)
#define LOONGSON_CFG2_LPIXU BIT(13)
-#define LOONGSON_CFG2_LPIXUN BIT(14)
-#define LOONGSON_CFG2_LZVP BIT(15)
-#define LOONGSON_CFG2_LZVREV GENMASK(18, 16)
+#define LOONGSON_CFG2_LPIXNU BIT(14)
+#define LOONGSON_CFG2_LVZP BIT(15)
+#define LOONGSON_CFG2_LVZREV GENMASK(18, 16)
#define LOONGSON_CFG2_LGFTP BIT(19)
#define LOONGSON_CFG2_LGFTPREV GENMASK(22, 20)
#define LOONGSON_CFG2_LLFTP BIT(23)
@@ -90,6 +92,13 @@ static inline u32 read_cpucfg(u32 reg)
#define LOONGSON_CFG2_LCSRP BIT(27)
#define LOONGSON_CFG2_LDISBLIKELY BIT(28)
+#define LOONGSON_CFG2_LPMREV_OFFSET 9
+#define LOONGSON_CFG2_LPM_REV1 (1 << LOONGSON_CFG2_LPMREV_OFFSET)
+#define LOONGSON_CFG2_LPM_REV2 (2 << LOONGSON_CFG2_LPMREV_OFFSET)
+#define LOONGSON_CFG2_LVZREV_OFFSET 16
+#define LOONGSON_CFG2_LVZ_REV1 (1 << LOONGSON_CFG2_LVZREV_OFFSET)
+#define LOONGSON_CFG2_LVZ_REV2 (2 << LOONGSON_CFG2_LVZREV_OFFSET)
+
#define LOONGSON_CFG3 0x3
#define LOONGSON_CFG3_LCAMP BIT(0)
#define LOONGSON_CFG3_LCAMREV GENMASK(3, 1)
@@ -97,6 +106,16 @@ static inline u32 read_cpucfg(u32 reg)
#define LOONGSON_CFG3_LCAMKW GENMASK(19, 12)
#define LOONGSON_CFG3_LCAMVW GENMASK(27, 20)
+#define LOONGSON_CFG3_LCAMREV_OFFSET 1
+#define LOONGSON_CFG3_LCAM_REV1 (1 << LOONGSON_CFG3_LCAMREV_OFFSET)
+#define LOONGSON_CFG3_LCAM_REV2 (2 << LOONGSON_CFG3_LCAMREV_OFFSET)
+#define LOONGSON_CFG3_LCAMNUM_OFFSET 4
+#define LOONGSON_CFG3_LCAMNUM_REV1 (0x3f << LOONGSON_CFG3_LCAMNUM_OFFSET)
+#define LOONGSON_CFG3_LCAMKW_OFFSET 12
+#define LOONGSON_CFG3_LCAMKW_REV1 (0x27 << LOONGSON_CFG3_LCAMKW_OFFSET)
+#define LOONGSON_CFG3_LCAMVW_OFFSET 20
+#define LOONGSON_CFG3_LCAMVW_REV1 (0x3f << LOONGSON_CFG3_LCAMVW_OFFSET)
+
#define LOONGSON_CFG4 0x4
#define LOONGSON_CFG4_CCFREQ GENMASK(31, 0)
@@ -139,7 +158,7 @@ static inline u64 csr_readq(u32 reg)
{
u64 __res;
- /* DWRCSR reg, val */
+ /* DRDCSR reg, val */
__asm__ __volatile__(
"parse_r __res,%0\n\t"
"parse_r reg,%1\n\t"
diff --git a/arch/mips/include/asm/mach-loongson64/mc146818rtc.h b/arch/mips/include/asm/mach-loongson64/mc146818rtc.h
deleted file mode 100644
index ebdccfee50be..000000000000
--- a/arch/mips/include/asm/mach-loongson64/mc146818rtc.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998, 2001, 03, 07 by Ralf Baechle (ralf@linux-mips.org)
- *
- * RTC routines for PC style attached Dallas chip.
- */
-#ifndef __ASM_MACH_LOONGSON64_MC146818RTC_H
-#define __ASM_MACH_LOONGSON64_MC146818RTC_H
-
-#include <linux/io.h>
-
-#define RTC_PORT(x) (0x70 + (x))
-#define RTC_IRQ 8
-
-static inline unsigned char CMOS_READ(unsigned long addr)
-{
- outb_p(addr, RTC_PORT(0));
- return inb_p(RTC_PORT(1));
-}
-
-static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
-{
- outb_p(addr, RTC_PORT(0));
- outb_p(data, RTC_PORT(1));
-}
-
-#define RTC_ALWAYS_BCD 0
-
-#ifndef mc146818_decode_year
-#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970)
-#endif
-
-#endif /* __ASM_MACH_LOONGSON64_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-loongson64/spaces.h b/arch/mips/include/asm/mach-loongson64/spaces.h
index e85bc1d9c4f2..3de0ac9d8829 100644
--- a/arch/mips/include/asm/mach-loongson64/spaces.h
+++ b/arch/mips/include/asm/mach-loongson64/spaces.h
@@ -6,5 +6,13 @@
#define CAC_BASE _AC(0x9800000000000000, UL)
#endif /* CONFIG_64BIT */
+/* Skip 128k to trap NULL pointer dereferences */
+#define PCI_IOBASE _AC(0xc000000000000000 + SZ_128K, UL)
+#define PCI_IOSIZE SZ_16M
+#define MAP_BASE (PCI_IOBASE + PCI_IOSIZE)
+
+/* Reserved at the start of PCI_IOBASE for legacy drivers */
+#define MMIO_LOWER_RESERVED 0x10000
+
#include <asm/mach-generic/spaces.h>
#endif
diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/cpu-feature-overrides.h b/arch/mips/include/asm/mach-pmcs-msp71xx/cpu-feature-overrides.h
deleted file mode 100644
index 016fa9446ba9..000000000000
--- a/arch/mips/include/asm/mach-pmcs-msp71xx/cpu-feature-overrides.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003, 04, 07 Ralf Baechle (ralf@linux-mips.org)
- */
-#ifndef __ASM_MACH_MSP71XX_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_MSP71XX_CPU_FEATURE_OVERRIDES_H
-
-#define cpu_has_mips16 1
-#define cpu_has_dsp 1
-/* #define cpu_has_dsp2 ??? - do runtime detection */
-#define cpu_has_mipsmt 1
-#define cpu_has_fpu 0
-
-#define cpu_has_mips32r1 0
-#define cpu_has_mips32r2 1
-#define cpu_has_mips64r1 0
-#define cpu_has_mips64r2 0
-
-#endif /* __ASM_MACH_MSP71XX_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_cic_int.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_cic_int.h
deleted file mode 100644
index 50de6876e1c9..000000000000
--- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_cic_int.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Defines for the MSP interrupt controller.
- *
- * Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved.
- * Author: Carsten Langgaard, carstenl@mips.com
- *
- * ########################################################################
- *
- * ########################################################################
- */
-
-#ifndef _MSP_CIC_INT_H
-#define _MSP_CIC_INT_H
-
-/*
- * The PMC-Sierra CIC interrupts are all centrally managed by the
- * CIC sub-system.
- * We attempt to keep the interrupt numbers as consistent as possible
- * across all of the MSP devices, but some differences will creep in ...
- * The interrupts which are directly forwarded to the MIPS core interrupts
- * are assigned interrupts in the range 0-7, interrupts cascaded through
- * the CIC are assigned interrupts 8-39. The cascade occurs on C_IRQ4
- * (MSP_INT_CIC). Currently we don't really distinguish between VPE1
- * and VPE0 (or thread contexts for that matter). Will have to fix.
- * The PER interrupts are assigned interrupts in the range 40-71.
-*/
-
-
-/*
- * IRQs directly forwarded to the CPU
- */
-#define MSP_MIPS_INTBASE 0
-#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */
-#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */
-#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */
-#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */
-#define MSP_INT_USB 4 /* IRQ for USB, C_IRQ2 */
-#define MSP_INT_SAR 5 /* IRQ for ADSL2+ SAR, C_IRQ3 */
-#define MSP_INT_CIC 6 /* IRQ for CIC block, C_IRQ4 */
-#define MSP_INT_SEC 7 /* IRQ for Sec engine, C_IRQ5 */
-
-/*
- * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4)
- * These defines should be tied to the register definitions for the CIC
- * interrupt routine. For now, just use hard-coded values.
- */
-#define MSP_CIC_INTBASE (MSP_MIPS_INTBASE + 8)
-#define MSP_INT_EXT0 (MSP_CIC_INTBASE + 0)
- /* External interrupt 0 */
-#define MSP_INT_EXT1 (MSP_CIC_INTBASE + 1)
- /* External interrupt 1 */
-#define MSP_INT_EXT2 (MSP_CIC_INTBASE + 2)
- /* External interrupt 2 */
-#define MSP_INT_EXT3 (MSP_CIC_INTBASE + 3)
- /* External interrupt 3 */
-#define MSP_INT_CPUIF (MSP_CIC_INTBASE + 4)
- /* CPU interface interrupt */
-#define MSP_INT_EXT4 (MSP_CIC_INTBASE + 5)
- /* External interrupt 4 */
-#define MSP_INT_CIC_USB (MSP_CIC_INTBASE + 6)
- /* Cascaded IRQ for USB */
-#define MSP_INT_MBOX (MSP_CIC_INTBASE + 7)
- /* Sec engine mailbox IRQ */
-#define MSP_INT_EXT5 (MSP_CIC_INTBASE + 8)
- /* External interrupt 5 */
-#define MSP_INT_TDM (MSP_CIC_INTBASE + 9)
- /* TDM interrupt */
-#define MSP_INT_CIC_MAC0 (MSP_CIC_INTBASE + 10)
- /* Cascaded IRQ for MAC 0 */
-#define MSP_INT_CIC_MAC1 (MSP_CIC_INTBASE + 11)
- /* Cascaded IRQ for MAC 1 */
-#define MSP_INT_CIC_SEC (MSP_CIC_INTBASE + 12)
- /* Cascaded IRQ for sec engine */
-#define MSP_INT_PER (MSP_CIC_INTBASE + 13)
- /* Peripheral interrupt */
-#define MSP_INT_TIMER0 (MSP_CIC_INTBASE + 14)
- /* SLP timer 0 */
-#define MSP_INT_TIMER1 (MSP_CIC_INTBASE + 15)
- /* SLP timer 1 */
-#define MSP_INT_TIMER2 (MSP_CIC_INTBASE + 16)
- /* SLP timer 2 */
-#define MSP_INT_VPE0_TIMER (MSP_CIC_INTBASE + 17)
- /* VPE0 MIPS timer */
-#define MSP_INT_BLKCP (MSP_CIC_INTBASE + 18)
- /* Block Copy */
-#define MSP_INT_UART0 (MSP_CIC_INTBASE + 19)
- /* UART 0 */
-#define MSP_INT_PCI (MSP_CIC_INTBASE + 20)
- /* PCI subsystem */
-#define MSP_INT_EXT6 (MSP_CIC_INTBASE + 21)
- /* External interrupt 5 */
-#define MSP_INT_PCI_MSI (MSP_CIC_INTBASE + 22)
- /* PCI Message Signal */
-#define MSP_INT_CIC_SAR (MSP_CIC_INTBASE + 23)
- /* Cascaded ADSL2+ SAR IRQ */
-#define MSP_INT_DSL (MSP_CIC_INTBASE + 24)
- /* ADSL2+ IRQ */
-#define MSP_INT_CIC_ERR (MSP_CIC_INTBASE + 25)
- /* SLP error condition */
-#define MSP_INT_VPE1_TIMER (MSP_CIC_INTBASE + 26)
- /* VPE1 MIPS timer */
-#define MSP_INT_VPE0_PC (MSP_CIC_INTBASE + 27)
- /* VPE0 Performance counter */
-#define MSP_INT_VPE1_PC (MSP_CIC_INTBASE + 28)
- /* VPE1 Performance counter */
-#define MSP_INT_EXT7 (MSP_CIC_INTBASE + 29)
- /* External interrupt 5 */
-#define MSP_INT_VPE0_SW (MSP_CIC_INTBASE + 30)
- /* VPE0 Software interrupt */
-#define MSP_INT_VPE1_SW (MSP_CIC_INTBASE + 31)
- /* VPE0 Software interrupt */
-
-/*
- * IRQs cascaded on CIC PER interrupt (MSP_INT_PER)
- */
-#define MSP_PER_INTBASE (MSP_CIC_INTBASE + 32)
-/* Reserved 0-1 */
-#define MSP_INT_UART1 (MSP_PER_INTBASE + 2)
- /* UART 1 */
-/* Reserved 3-5 */
-#define MSP_INT_2WIRE (MSP_PER_INTBASE + 6)
- /* 2-wire */
-#define MSP_INT_TM0 (MSP_PER_INTBASE + 7)
- /* Peripheral timer block out 0 */
-#define MSP_INT_TM1 (MSP_PER_INTBASE + 8)
- /* Peripheral timer block out 1 */
-/* Reserved 9 */
-#define MSP_INT_SPRX (MSP_PER_INTBASE + 10)
- /* SPI RX complete */
-#define MSP_INT_SPTX (MSP_PER_INTBASE + 11)
- /* SPI TX complete */
-#define MSP_INT_GPIO (MSP_PER_INTBASE + 12)
- /* GPIO */
-#define MSP_INT_PER_ERR (MSP_PER_INTBASE + 13)
- /* Peripheral error */
-/* Reserved 14-31 */
-
-#endif /* !_MSP_CIC_INT_H */
diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h
deleted file mode 100644
index daacebb047c2..000000000000
--- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_gpio_macros.h
+++ /dev/null
@@ -1,343 +0,0 @@
-/*
- *
- * Macros for external SMP-safe access to the PMC MSP71xx reference
- * board GPIO pins
- *
- * Copyright 2010 PMC-Sierra, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __MSP_GPIO_MACROS_H__
-#define __MSP_GPIO_MACROS_H__
-
-#include <msp_regops.h>
-#include <msp_regs.h>
-
-#ifdef CONFIG_PMC_MSP7120_GW
-#define MSP_NUM_GPIOS 20
-#else
-#define MSP_NUM_GPIOS 28
-#endif
-
-/* -- GPIO Enumerations -- */
-enum msp_gpio_data {
- MSP_GPIO_LO = 0,
- MSP_GPIO_HI = 1,
- MSP_GPIO_NONE, /* Special - Means pin is out of range */
- MSP_GPIO_TOGGLE, /* Special - Sets pin to opposite */
-};
-
-enum msp_gpio_mode {
- MSP_GPIO_INPUT = 0x0,
- /* MSP_GPIO_ INTERRUPT = 0x1, Not supported yet */
- MSP_GPIO_UART_INPUT = 0x2, /* Only GPIO 4 or 5 */
- MSP_GPIO_OUTPUT = 0x8,
- MSP_GPIO_UART_OUTPUT = 0x9, /* Only GPIO 2 or 3 */
- MSP_GPIO_PERIF_TIMERA = 0x9, /* Only GPIO 0 or 1 */
- MSP_GPIO_PERIF_TIMERB = 0xa, /* Only GPIO 0 or 1 */
- MSP_GPIO_UNKNOWN = 0xb, /* No such GPIO or mode */
-};
-
-/* -- Static Tables -- */
-
-/* Maps pins to data register */
-static volatile u32 * const MSP_GPIO_DATA_REGISTER[] = {
- /* GPIO 0 and 1 on the first register */
- GPIO_DATA1_REG, GPIO_DATA1_REG,
- /* GPIO 2, 3, 4, and 5 on the second register */
- GPIO_DATA2_REG, GPIO_DATA2_REG, GPIO_DATA2_REG, GPIO_DATA2_REG,
- /* GPIO 6, 7, 8, and 9 on the third register */
- GPIO_DATA3_REG, GPIO_DATA3_REG, GPIO_DATA3_REG, GPIO_DATA3_REG,
- /* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */
- GPIO_DATA4_REG, GPIO_DATA4_REG, GPIO_DATA4_REG, GPIO_DATA4_REG,
- GPIO_DATA4_REG, GPIO_DATA4_REG,
- /* GPIO 16 - 23 on the first strange EXTENDED register */
- EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
- EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
- EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
- /* GPIO 24 - 27 on the second strange EXTENDED register */
- EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG,
- EXTENDED_GPIO2_REG,
-};
-
-/* Maps pins to mode register */
-static volatile u32 * const MSP_GPIO_MODE_REGISTER[] = {
- /* GPIO 0 and 1 on the first register */
- GPIO_CFG1_REG, GPIO_CFG1_REG,
- /* GPIO 2, 3, 4, and 5 on the second register */
- GPIO_CFG2_REG, GPIO_CFG2_REG, GPIO_CFG2_REG, GPIO_CFG2_REG,
- /* GPIO 6, 7, 8, and 9 on the third register */
- GPIO_CFG3_REG, GPIO_CFG3_REG, GPIO_CFG3_REG, GPIO_CFG3_REG,
- /* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */
- GPIO_CFG4_REG, GPIO_CFG4_REG, GPIO_CFG4_REG, GPIO_CFG4_REG,
- GPIO_CFG4_REG, GPIO_CFG4_REG,
- /* GPIO 16 - 23 on the first strange EXTENDED register */
- EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
- EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
- EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
- /* GPIO 24 - 27 on the second strange EXTENDED register */
- EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG,
- EXTENDED_GPIO2_REG,
-};
-
-/* Maps 'basic' pins to relative offset from 0 per register */
-static int MSP_GPIO_OFFSET[] = {
- /* GPIO 0 and 1 on the first register */
- 0, 0,
- /* GPIO 2, 3, 4, and 5 on the second register */
- 2, 2, 2, 2,
- /* GPIO 6, 7, 8, and 9 on the third register */
- 6, 6, 6, 6,
- /* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */
- 10, 10, 10, 10, 10, 10,
-};
-
-/* Maps MODE to allowed pin mask */
-static unsigned int MSP_GPIO_MODE_ALLOWED[] = {
- 0xffffffff, /* Mode 0 - INPUT */
- 0x00000, /* Mode 1 - INTERRUPT */
- 0x00030, /* Mode 2 - UART_INPUT (GPIO 4, 5)*/
- 0, 0, 0, 0, 0, /* Modes 3, 4, 5, 6, and 7 are reserved */
- 0xffffffff, /* Mode 8 - OUTPUT */
- 0x0000f, /* Mode 9 - UART_OUTPUT/
- PERF_TIMERA (GPIO 0, 1, 2, 3) */
- 0x00003, /* Mode a - PERF_TIMERB (GPIO 0, 1) */
- 0x00000, /* Mode b - Not really a mode! */
-};
-
-/* -- Bit masks -- */
-
-/* This gives you the 'register relative offset gpio' number */
-#define OFFSET_GPIO_NUMBER(gpio) (gpio - MSP_GPIO_OFFSET[gpio])
-
-/* These take the 'register relative offset gpio' number */
-#define BASIC_DATA_REG_MASK(ogpio) (1 << ogpio)
-#define BASIC_MODE_REG_VALUE(mode, ogpio) \
- (mode << BASIC_MODE_REG_SHIFT(ogpio))
-#define BASIC_MODE_REG_MASK(ogpio) \
- BASIC_MODE_REG_VALUE(0xf, ogpio)
-#define BASIC_MODE_REG_SHIFT(ogpio) (ogpio * 4)
-#define BASIC_MODE_REG_FROM_REG(data, ogpio) \
- ((data & BASIC_MODE_REG_MASK(ogpio)) >> BASIC_MODE_REG_SHIFT(ogpio))
-
-/* These take the actual GPIO number (0 through 15) */
-#define BASIC_DATA_MASK(gpio) \
- BASIC_DATA_REG_MASK(OFFSET_GPIO_NUMBER(gpio))
-#define BASIC_MODE_MASK(gpio) \
- BASIC_MODE_REG_MASK(OFFSET_GPIO_NUMBER(gpio))
-#define BASIC_MODE(mode, gpio) \
- BASIC_MODE_REG_VALUE(mode, OFFSET_GPIO_NUMBER(gpio))
-#define BASIC_MODE_SHIFT(gpio) \
- BASIC_MODE_REG_SHIFT(OFFSET_GPIO_NUMBER(gpio))
-#define BASIC_MODE_FROM_REG(data, gpio) \
- BASIC_MODE_REG_FROM_REG(data, OFFSET_GPIO_NUMBER(gpio))
-
-/*
- * Each extended GPIO register is 32 bits long and is responsible for up to
- * eight GPIOs. The least significant 16 bits contain the set and clear bit
- * pair for each of the GPIOs. The most significant 16 bits contain the
- * disable and enable bit pair for each of the GPIOs. For example, the
- * extended GPIO reg for GPIOs 16-23 is as follows:
- *
- * 31: GPIO23_DISABLE
- * ...
- * 19: GPIO17_DISABLE
- * 18: GPIO17_ENABLE
- * 17: GPIO16_DISABLE
- * 16: GPIO16_ENABLE
- * ...
- * 3: GPIO17_SET
- * 2: GPIO17_CLEAR
- * 1: GPIO16_SET
- * 0: GPIO16_CLEAR
- */
-
-/* This gives the 'register relative offset gpio' number */
-#define EXTENDED_OFFSET_GPIO(gpio) (gpio < 24 ? gpio - 16 : gpio - 24)
-
-/* These take the 'register relative offset gpio' number */
-#define EXTENDED_REG_DISABLE(ogpio) (0x2 << ((ogpio * 2) + 16))
-#define EXTENDED_REG_ENABLE(ogpio) (0x1 << ((ogpio * 2) + 16))
-#define EXTENDED_REG_SET(ogpio) (0x2 << (ogpio * 2))
-#define EXTENDED_REG_CLR(ogpio) (0x1 << (ogpio * 2))
-
-/* These take the actual GPIO number (16 through 27) */
-#define EXTENDED_DISABLE(gpio) \
- EXTENDED_REG_DISABLE(EXTENDED_OFFSET_GPIO(gpio))
-#define EXTENDED_ENABLE(gpio) \
- EXTENDED_REG_ENABLE(EXTENDED_OFFSET_GPIO(gpio))
-#define EXTENDED_SET(gpio) \
- EXTENDED_REG_SET(EXTENDED_OFFSET_GPIO(gpio))
-#define EXTENDED_CLR(gpio) \
- EXTENDED_REG_CLR(EXTENDED_OFFSET_GPIO(gpio))
-
-#define EXTENDED_FULL_MASK (0xffffffff)
-
-/* -- API inline-functions -- */
-
-/*
- * Gets the current value of the specified pin
- */
-static inline enum msp_gpio_data msp_gpio_pin_get(unsigned int gpio)
-{
- u32 pinhi_mask = 0, pinhi_mask2 = 0;
-
- if (gpio >= MSP_NUM_GPIOS)
- return MSP_GPIO_NONE;
-
- if (gpio < 16) {
- pinhi_mask = BASIC_DATA_MASK(gpio);
- } else {
- /*
- * Two cases are possible with the EXTENDED register:
- * - In output mode (ENABLED flag set), check the CLR bit
- * - In input mode (ENABLED flag not set), check the SET bit
- */
- pinhi_mask = EXTENDED_ENABLE(gpio) | EXTENDED_CLR(gpio);
- pinhi_mask2 = EXTENDED_SET(gpio);
- }
- if (((*MSP_GPIO_DATA_REGISTER[gpio] & pinhi_mask) == pinhi_mask) ||
- (*MSP_GPIO_DATA_REGISTER[gpio] & pinhi_mask2))
- return MSP_GPIO_HI;
- else
- return MSP_GPIO_LO;
-}
-
-/* Sets the specified pin to the specified value */
-static inline void msp_gpio_pin_set(enum msp_gpio_data data, unsigned int gpio)
-{
- if (gpio >= MSP_NUM_GPIOS)
- return;
-
- if (gpio < 16) {
- if (data == MSP_GPIO_TOGGLE)
- toggle_reg32(MSP_GPIO_DATA_REGISTER[gpio],
- BASIC_DATA_MASK(gpio));
- else if (data == MSP_GPIO_HI)
- set_reg32(MSP_GPIO_DATA_REGISTER[gpio],
- BASIC_DATA_MASK(gpio));
- else
- clear_reg32(MSP_GPIO_DATA_REGISTER[gpio],
- BASIC_DATA_MASK(gpio));
- } else {
- if (data == MSP_GPIO_TOGGLE) {
- /* Special ugly case:
- * We have to read the CLR bit.
- * If set, we write the CLR bit.
- * If not, we write the SET bit.
- */
- u32 tmpdata;
-
- custom_read_reg32(MSP_GPIO_DATA_REGISTER[gpio],
- tmpdata);
- if (tmpdata & EXTENDED_CLR(gpio))
- tmpdata = EXTENDED_CLR(gpio);
- else
- tmpdata = EXTENDED_SET(gpio);
- custom_write_reg32(MSP_GPIO_DATA_REGISTER[gpio],
- tmpdata);
- } else {
- u32 newdata;
-
- if (data == MSP_GPIO_HI)
- newdata = EXTENDED_SET(gpio);
- else
- newdata = EXTENDED_CLR(gpio);
- set_value_reg32(MSP_GPIO_DATA_REGISTER[gpio],
- EXTENDED_FULL_MASK, newdata);
- }
- }
-}
-
-/* Sets the specified pin to the specified value */
-static inline void msp_gpio_pin_hi(unsigned int gpio)
-{
- msp_gpio_pin_set(MSP_GPIO_HI, gpio);
-}
-
-/* Sets the specified pin to the specified value */
-static inline void msp_gpio_pin_lo(unsigned int gpio)
-{
- msp_gpio_pin_set(MSP_GPIO_LO, gpio);
-}
-
-/* Sets the specified pin to the opposite value */
-static inline void msp_gpio_pin_toggle(unsigned int gpio)
-{
- msp_gpio_pin_set(MSP_GPIO_TOGGLE, gpio);
-}
-
-/* Gets the mode of the specified pin */
-static inline enum msp_gpio_mode msp_gpio_pin_get_mode(unsigned int gpio)
-{
- enum msp_gpio_mode retval = MSP_GPIO_UNKNOWN;
- uint32_t data;
-
- if (gpio >= MSP_NUM_GPIOS)
- return retval;
-
- data = *MSP_GPIO_MODE_REGISTER[gpio];
-
- if (gpio < 16) {
- retval = BASIC_MODE_FROM_REG(data, gpio);
- } else {
- /* Extended pins can only be either INPUT or OUTPUT */
- if (data & EXTENDED_ENABLE(gpio))
- retval = MSP_GPIO_OUTPUT;
- else
- retval = MSP_GPIO_INPUT;
- }
-
- return retval;
-}
-
-/*
- * Sets the specified mode on the requested pin
- * Returns 0 on success, or -1 if that mode is not allowed on this pin
- */
-static inline int msp_gpio_pin_mode(enum msp_gpio_mode mode, unsigned int gpio)
-{
- u32 modemask, newmode;
-
- if ((1 << gpio) & ~MSP_GPIO_MODE_ALLOWED[mode])
- return -1;
-
- if (gpio >= MSP_NUM_GPIOS)
- return -1;
-
- if (gpio < 16) {
- modemask = BASIC_MODE_MASK(gpio);
- newmode = BASIC_MODE(mode, gpio);
- } else {
- modemask = EXTENDED_FULL_MASK;
- if (mode == MSP_GPIO_INPUT)
- newmode = EXTENDED_DISABLE(gpio);
- else
- newmode = EXTENDED_ENABLE(gpio);
- }
- /* Do the set atomically */
- set_value_reg32(MSP_GPIO_MODE_REGISTER[gpio], modemask, newmode);
-
- return 0;
-}
-
-#endif /* __MSP_GPIO_MACROS_H__ */
diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_int.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_int.h
deleted file mode 100644
index 55078b40f5b5..000000000000
--- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_int.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Defines for the MSP interrupt handlers.
- *
- * Copyright (C) 2005, PMC-Sierra, Inc. All rights reserved.
- * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
- *
- * ########################################################################
- *
- * ########################################################################
- */
-
-#ifndef _MSP_INT_H
-#define _MSP_INT_H
-
-/*
- * The PMC-Sierra MSP product line has at least two different interrupt
- * controllers, the SLP register based scheme and the CIC interrupt
- * controller block mechanism. This file distinguishes between them
- * so that devices see a uniform interface.
- */
-
-#if defined(CONFIG_IRQ_MSP_SLP)
- #include "msp_slp_int.h"
-#elif defined(CONFIG_IRQ_MSP_CIC)
- #include "msp_cic_int.h"
-#else
- #error "What sort of interrupt controller does *your* MSP have?"
-#endif
-
-#endif /* !_MSP_INT_H */
diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_pci.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_pci.h
deleted file mode 100644
index 5b2535efceb2..000000000000
--- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_pci.h
+++ /dev/null
@@ -1,189 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2000-2006 PMC-Sierra INC.
- *
- * PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND
- * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS
- * SOFTWARE.
- */
-
-#ifndef _MSP_PCI_H_
-#define _MSP_PCI_H_
-
-#define MSP_HAS_PCI(ID) (((u32)(ID) <= 0x4236) && ((u32)(ID) >= 0x4220))
-
-/*
- * It is convenient to program the OATRAN register so that
- * Athena virtual address space and PCI address space are
- * the same. This is not a requirement, just a convenience.
- *
- * The only hard restrictions on the value of OATRAN is that
- * OATRAN must not be programmed to allow translated memory
- * addresses to fall within the lowest 512MB of
- * PCI address space. This region is hardcoded
- * for use as Athena PCI Host Controller target
- * access memory space to the Athena's SDRAM.
- *
- * Note that OATRAN applies only to memory accesses, not
- * to I/O accesses.
- *
- * To program OATRAN to make Athena virtual address space
- * and PCI address space have the same values, OATRAN
- * is to be programmed to 0xB8000000. The top seven
- * bits of the value mimic the seven bits clipped off
- * by the PCI Host controller.
- *
- * With OATRAN at the said value, when the CPU does
- * an access to its virtual address at, say 0xB900_5000,
- * the address appearing on the PCI bus will be
- * 0xB900_5000.
- * - Michael Penner
- */
-#define MSP_PCI_OATRAN 0xB8000000UL
-
-#define MSP_PCI_SPACE_BASE (MSP_PCI_OATRAN + 0x1002000UL)
-#define MSP_PCI_SPACE_SIZE (0x3000000UL - 0x2000)
-#define MSP_PCI_SPACE_END \
- (MSP_PCI_SPACE_BASE + MSP_PCI_SPACE_SIZE - 1)
-#define MSP_PCI_IOSPACE_BASE (MSP_PCI_OATRAN + 0x1001000UL)
-#define MSP_PCI_IOSPACE_SIZE 0x1000
-#define MSP_PCI_IOSPACE_END \
- (MSP_PCI_IOSPACE_BASE + MSP_PCI_IOSPACE_SIZE - 1)
-
-/* IRQ for PCI status interrupts */
-#define PCI_STAT_IRQ 20
-
-#define QFLUSH_REG_1 0xB7F40000
-
-typedef volatile unsigned int pcireg;
-typedef void * volatile ppcireg;
-
-struct pci_block_copy
-{
- pcireg unused1; /* +0x00 */
- pcireg unused2; /* +0x04 */
- ppcireg unused3; /* +0x08 */
- ppcireg unused4; /* +0x0C */
- pcireg unused5; /* +0x10 */
- pcireg unused6; /* +0x14 */
- pcireg unused7; /* +0x18 */
- ppcireg unused8; /* +0x1C */
- ppcireg unused9; /* +0x20 */
- pcireg unusedA; /* +0x24 */
- ppcireg unusedB; /* +0x28 */
- ppcireg unusedC; /* +0x2C */
-};
-
-enum
-{
- config_device_vendor, /* 0 */
- config_status_command, /* 1 */
- config_class_revision, /* 2 */
- config_BIST_header_latency_cache, /* 3 */
- config_BAR0, /* 4 */
- config_BAR1, /* 5 */
- config_BAR2, /* 6 */
- config_not_used7, /* 7 */
- config_not_used8, /* 8 */
- config_not_used9, /* 9 */
- config_CIS, /* 10 */
- config_subsystem, /* 11 */
- config_not_used12, /* 12 */
- config_capabilities, /* 13 */
- config_not_used14, /* 14 */
- config_lat_grant_irq, /* 15 */
- config_message_control,/* 16 */
- config_message_addr, /* 17 */
- config_message_data, /* 18 */
- config_VPD_addr, /* 19 */
- config_VPD_data, /* 20 */
- config_maxregs /* 21 - number of registers */
-};
-
-struct msp_pci_regs
-{
- pcireg hop_unused_00; /* +0x00 */
- pcireg hop_unused_04; /* +0x04 */
- pcireg hop_unused_08; /* +0x08 */
- pcireg hop_unused_0C; /* +0x0C */
- pcireg hop_unused_10; /* +0x10 */
- pcireg hop_unused_14; /* +0x14 */
- pcireg hop_unused_18; /* +0x18 */
- pcireg hop_unused_1C; /* +0x1C */
- pcireg hop_unused_20; /* +0x20 */
- pcireg hop_unused_24; /* +0x24 */
- pcireg hop_unused_28; /* +0x28 */
- pcireg hop_unused_2C; /* +0x2C */
- pcireg hop_unused_30; /* +0x30 */
- pcireg hop_unused_34; /* +0x34 */
- pcireg if_control; /* +0x38 */
- pcireg oatran; /* +0x3C */
- pcireg reset_ctl; /* +0x40 */
- pcireg config_addr; /* +0x44 */
- pcireg hop_unused_48; /* +0x48 */
- pcireg msg_signaled_int_status; /* +0x4C */
- pcireg msg_signaled_int_mask; /* +0x50 */
- pcireg if_status; /* +0x54 */
- pcireg if_mask; /* +0x58 */
- pcireg hop_unused_5C; /* +0x5C */
- pcireg hop_unused_60; /* +0x60 */
- pcireg hop_unused_64; /* +0x64 */
- pcireg hop_unused_68; /* +0x68 */
- pcireg hop_unused_6C; /* +0x6C */
- pcireg hop_unused_70; /* +0x70 */
-
- struct pci_block_copy pci_bc[2] __attribute__((aligned(64)));
-
- pcireg error_hdr1; /* +0xE0 */
- pcireg error_hdr2; /* +0xE4 */
-
- pcireg config[config_maxregs] __attribute__((aligned(256)));
-
-};
-
-#define BPCI_CFGADDR_BUSNUM_SHF 16
-#define BPCI_CFGADDR_FUNCTNUM_SHF 8
-#define BPCI_CFGADDR_REGNUM_SHF 2
-#define BPCI_CFGADDR_ENABLE (1<<31)
-
-#define BPCI_IFCONTROL_RTO (1<<20) /* Retry timeout */
-#define BPCI_IFCONTROL_HCE (1<<16) /* Host configuration enable */
-#define BPCI_IFCONTROL_CTO_SHF 12 /* Shift count for CTO bits */
-#define BPCI_IFCONTROL_SE (1<<5) /* Enable exceptions on errors */
-#define BPCI_IFCONTROL_BIST (1<<4) /* Use BIST in per. mode */
-#define BPCI_IFCONTROL_CAP (1<<3) /* Enable capabilities */
-#define BPCI_IFCONTROL_MMC_SHF 0 /* Shift count for MMC bits */
-
-#define BPCI_IFSTATUS_MGT (1<<8) /* Master Grant timeout */
-#define BPCI_IFSTATUS_MTT (1<<9) /* Master TRDY timeout */
-#define BPCI_IFSTATUS_MRT (1<<10) /* Master retry timeout */
-#define BPCI_IFSTATUS_BC0F (1<<13) /* Block copy 0 fault */
-#define BPCI_IFSTATUS_BC1F (1<<14) /* Block copy 1 fault */
-#define BPCI_IFSTATUS_PCIU (1<<15) /* PCI unable to respond */
-#define BPCI_IFSTATUS_BSIZ (1<<16) /* PCI access with illegal size */
-#define BPCI_IFSTATUS_BADD (1<<17) /* PCI access with illegal addr */
-#define BPCI_IFSTATUS_RTO (1<<18) /* Retry time out */
-#define BPCI_IFSTATUS_SER (1<<19) /* System error */
-#define BPCI_IFSTATUS_PER (1<<20) /* Parity error */
-#define BPCI_IFSTATUS_LCA (1<<21) /* Local CPU abort */
-#define BPCI_IFSTATUS_MEM (1<<22) /* Memory prot. violation */
-#define BPCI_IFSTATUS_ARB (1<<23) /* Arbiter timed out */
-#define BPCI_IFSTATUS_STA (1<<27) /* Signaled target abort */
-#define BPCI_IFSTATUS_TA (1<<28) /* Target abort */
-#define BPCI_IFSTATUS_MA (1<<29) /* Master abort */
-#define BPCI_IFSTATUS_PEI (1<<30) /* Parity error as initiator */
-#define BPCI_IFSTATUS_PET (1<<31) /* Parity error as target */
-
-#define BPCI_RESETCTL_PR (1<<0) /* True if reset asserted */
-#define BPCI_RESETCTL_RT (1<<4) /* Release time */
-#define BPCI_RESETCTL_CT (1<<8) /* Config time */
-#define BPCI_RESETCTL_PE (1<<12) /* PCI enabled */
-#define BPCI_RESETCTL_HM (1<<13) /* PCI host mode */
-#define BPCI_RESETCTL_RI (1<<14) /* PCI reset in */
-
-extern struct msp_pci_regs msp_pci_regs
- __attribute__((section(".register")));
-extern unsigned long msp_pci_config_space
- __attribute__((section(".register")));
-
-#endif /* !_MSP_PCI_H_ */
diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_prom.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_prom.h
deleted file mode 100644
index 4120a01c30a9..000000000000
--- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_prom.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * MIPS boards bootprom interface for the Linux kernel.
- *
- * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
- * Author: Carsten Langgaard, carstenl@mips.com
- *
- * ########################################################################
- *
- * ########################################################################
- */
-
-#ifndef _ASM_MSP_PROM_H
-#define _ASM_MSP_PROM_H
-
-#include <linux/types.h>
-
-#define DEVICEID "deviceid"
-#define FEATURES "features"
-#define PROM_ENV "prom_env"
-#define PROM_ENV_FILE "/proc/"PROM_ENV
-#define PROM_ENV_SIZE 256
-
-#define CPU_DEVID_FAMILY 0x0000ff00
-#define CPU_DEVID_REVISION 0x000000ff
-
-#define FPGA_IS_POLO(revision) \
- (((revision >= 0xb0) && (revision < 0xd0)))
-#define FPGA_IS_5000(revision) \
- ((revision >= 0x80) && (revision <= 0x90))
-#define FPGA_IS_ZEUS(revision) ((revision < 0x7f))
-#define FPGA_IS_DUET(revision) \
- (((revision >= 0xa0) && (revision < 0xb0)))
-#define FPGA_IS_MSP4200(revision) ((revision >= 0xd0))
-#define FPGA_IS_MSP7100(revision) ((revision >= 0xd0))
-
-#define MACHINE_TYPE_POLO "POLO"
-#define MACHINE_TYPE_DUET "DUET"
-#define MACHINE_TYPE_ZEUS "ZEUS"
-#define MACHINE_TYPE_MSP2000REVB "MSP2000REVB"
-#define MACHINE_TYPE_MSP5000 "MSP5000"
-#define MACHINE_TYPE_MSP4200 "MSP4200"
-#define MACHINE_TYPE_MSP7120 "MSP7120"
-#define MACHINE_TYPE_MSP7130 "MSP7130"
-#define MACHINE_TYPE_OTHER "OTHER"
-
-#define MACHINE_TYPE_POLO_FPGA "POLO-FPGA"
-#define MACHINE_TYPE_DUET_FPGA "DUET-FPGA"
-#define MACHINE_TYPE_ZEUS_FPGA "ZEUS_FPGA"
-#define MACHINE_TYPE_MSP2000REVB_FPGA "MSP2000REVB-FPGA"
-#define MACHINE_TYPE_MSP5000_FPGA "MSP5000-FPGA"
-#define MACHINE_TYPE_MSP4200_FPGA "MSP4200-FPGA"
-#define MACHINE_TYPE_MSP7100_FPGA "MSP7100-FPGA"
-#define MACHINE_TYPE_OTHER_FPGA "OTHER-FPGA"
-
-/* Device Family definitions */
-#define FAMILY_FPGA 0x0000
-#define FAMILY_ZEUS 0x1000
-#define FAMILY_POLO 0x2000
-#define FAMILY_DUET 0x4000
-#define FAMILY_TRIAD 0x5000
-#define FAMILY_MSP4200 0x4200
-#define FAMILY_MSP4200_FPGA 0x4f00
-#define FAMILY_MSP7100 0x7100
-#define FAMILY_MSP7100_FPGA 0x7f00
-
-/* Device Type definitions */
-#define TYPE_MSP7120 0x7120
-#define TYPE_MSP7130 0x7130
-
-#define ENET_KEY 'E'
-#define ENETTXD_KEY 'e'
-#define PCI_KEY 'P'
-#define PCIMUX_KEY 'p'
-#define SEC_KEY 'S'
-#define SPAD_KEY 'D'
-#define TDM_KEY 'T'
-#define ZSP_KEY 'Z'
-
-#define FEATURE_NOEXIST '-'
-#define FEATURE_EXIST '+'
-
-#define ENET_MII 'M'
-#define ENET_RMII 'R'
-
-#define ENETTXD_FALLING 'F'
-#define ENETTXD_RISING 'R'
-
-#define PCI_HOST 'H'
-#define PCI_PERIPHERAL 'P'
-
-#define PCIMUX_FULL 'F'
-#define PCIMUX_SINGLE 'S'
-
-#define SEC_DUET 'D'
-#define SEC_POLO 'P'
-#define SEC_SLOW 'S'
-#define SEC_TRIAD 'T'
-
-#define SPAD_POLO 'P'
-
-#define TDM_DUET 'D' /* DUET TDMs might exist */
-#define TDM_POLO 'P' /* POLO TDMs might exist */
-#define TDM_TRIAD 'T' /* TRIAD TDMs might exist */
-
-#define ZSP_DUET 'D' /* one DUET zsp engine */
-#define ZSP_TRIAD 'T' /* two TRIAD zsp engines */
-
-extern char *prom_getenv(char *name);
-extern void prom_init_cmdline(void);
-extern void prom_meminit(void);
-extern void prom_fixup_mem_map(unsigned long start_mem,
- unsigned long end_mem);
-
-extern int get_ethernet_addr(char *ethaddr_name, char *ethernet_addr);
-extern unsigned long get_deviceid(void);
-extern char identify_enet(unsigned long interface_num);
-extern char identify_enetTxD(unsigned long interface_num);
-extern char identify_pci(void);
-extern char identify_sec(void);
-extern char identify_spad(void);
-extern char identify_sec(void);
-extern char identify_tdm(void);
-extern char identify_zsp(void);
-extern unsigned long identify_family(void);
-extern unsigned long identify_revision(void);
-
-/*
- * The following macro calls prom_printf and puts the format string
- * into an init section so it can be reclaimed.
- */
-#define ppfinit(f, x...) \
- do { \
- static char _f[] __initdata = KERN_INFO f; \
- printk(_f, ## x); \
- } while (0)
-
-/* Memory descriptor management. */
-#define PROM_MAX_PMEMBLOCKS 7 /* 6 used */
-
-enum yamon_memtypes {
- yamon_dontuse,
- yamon_prom,
- yamon_free,
-};
-
-struct prom_pmemblock {
- unsigned long base; /* Within KSEG0. */
- unsigned int size; /* In bytes. */
- unsigned int type; /* free or prom memory */
-};
-
-extern int prom_argc;
-extern char **prom_argv;
-extern char **prom_envp;
-extern int *prom_vec;
-extern struct prom_pmemblock *prom_getmdesc(void);
-
-#endif /* !_ASM_MSP_PROM_H */
diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h
deleted file mode 100644
index 90dbe43c8d27..000000000000
--- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * SMP/VPE-safe functions to access "registers" (see note).
- *
- * NOTES:
-* - These macros use ll/sc instructions, so it is your responsibility to
- * ensure these are available on your platform before including this file.
- * - The MIPS32 spec states that ll/sc results are undefined for uncached
- * accesses. This means they can't be used on HW registers accessed
- * through kseg1. Code which requires these macros for this purpose must
- * front-end the registers with cached memory "registers" and have a single
- * thread update the actual HW registers.
- * - A maximum of 2k of code can be inserted between ll and sc. Every
- * memory accesses between the instructions will increase the chance of
- * sc failing and having to loop.
- * - When using custom_read_reg32/custom_write_reg32 only perform the
- * necessary logical operations on the register value in between these
- * two calls. All other logic should be performed before the first call.
- * - There is a bug on the R10000 chips which has a workaround. If you
- * are affected by this bug, make sure to define the symbol 'R10000_LLSC_WAR'
- * to be non-zero. If you are using this header from within linux, you may
- * include <asm/war.h> before including this file to have this defined
- * appropriately for you.
- *
- * Copyright 2005-2007 PMC-Sierra, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
- * EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc., 675
- * Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_REGOPS_H__
-#define __ASM_REGOPS_H__
-
-#include <linux/types.h>
-
-#include <asm/compiler.h>
-#include <asm/war.h>
-
-#ifndef R10000_LLSC_WAR
-#define R10000_LLSC_WAR 0
-#endif
-
-#if R10000_LLSC_WAR == 1
-#define __beqz "beqzl "
-#else
-#define __beqz "beqz "
-#endif
-
-#ifndef _LINUX_TYPES_H
-typedef unsigned int u32;
-#endif
-
-/*
- * Sets all the masked bits to the corresponding value bits
- */
-static inline void set_value_reg32(volatile u32 *const addr,
- u32 const mask,
- u32 const value)
-{
- u32 temp;
-
- __asm__ __volatile__(
- " .set push \n"
- " .set arch=r4000 \n"
- "1: ll %0, %1 # set_value_reg32 \n"
- " and %0, %2 \n"
- " or %0, %3 \n"
- " sc %0, %1 \n"
- " "__beqz"%0, 1b \n"
- " nop \n"
- " .set pop \n"
- : "=&r" (temp), "=" GCC_OFF_SMALL_ASM() (*addr)
- : "ir" (~mask), "ir" (value), GCC_OFF_SMALL_ASM() (*addr));
-}
-
-/*
- * Sets all the masked bits to '1'
- */
-static inline void set_reg32(volatile u32 *const addr,
- u32 const mask)
-{
- u32 temp;
-
- __asm__ __volatile__(
- " .set push \n"
- " .set arch=r4000 \n"
- "1: ll %0, %1 # set_reg32 \n"
- " or %0, %2 \n"
- " sc %0, %1 \n"
- " "__beqz"%0, 1b \n"
- " nop \n"
- " .set pop \n"
- : "=&r" (temp), "=" GCC_OFF_SMALL_ASM() (*addr)
- : "ir" (mask), GCC_OFF_SMALL_ASM() (*addr));
-}
-
-/*
- * Sets all the masked bits to '0'
- */
-static inline void clear_reg32(volatile u32 *const addr,
- u32 const mask)
-{
- u32 temp;
-
- __asm__ __volatile__(
- " .set push \n"
- " .set arch=r4000 \n"
- "1: ll %0, %1 # clear_reg32 \n"
- " and %0, %2 \n"
- " sc %0, %1 \n"
- " "__beqz"%0, 1b \n"
- " nop \n"
- " .set pop \n"
- : "=&r" (temp), "=" GCC_OFF_SMALL_ASM() (*addr)
- : "ir" (~mask), GCC_OFF_SMALL_ASM() (*addr));
-}
-
-/*
- * Toggles all masked bits from '0' to '1' and '1' to '0'
- */
-static inline void toggle_reg32(volatile u32 *const addr,
- u32 const mask)
-{
- u32 temp;
-
- __asm__ __volatile__(
- " .set push \n"
- " .set arch=r4000 \n"
- "1: ll %0, %1 # toggle_reg32 \n"
- " xor %0, %2 \n"
- " sc %0, %1 \n"
- " "__beqz"%0, 1b \n"
- " nop \n"
- " .set pop \n"
- : "=&r" (temp), "=" GCC_OFF_SMALL_ASM() (*addr)
- : "ir" (mask), GCC_OFF_SMALL_ASM() (*addr));
-}
-
-/*
- * Read all masked bits others are returned as '0'
- */
-static inline u32 read_reg32(volatile u32 *const addr,
- u32 const mask)
-{
- u32 temp;
-
- __asm__ __volatile__(
- " .set push \n"
- " .set noreorder \n"
- " lw %0, %1 # read \n"
- " and %0, %2 # mask \n"
- " .set pop \n"
- : "=&r" (temp)
- : "m" (*addr), "ir" (mask));
-
- return temp;
-}
-
-/*
- * blocking_read_reg32 - Read address with blocking load
- *
- * Uncached writes need to be read back to ensure they reach RAM.
- * The returned value must be 'used' to prevent from becoming a
- * non-blocking load.
- */
-static inline u32 blocking_read_reg32(volatile u32 *const addr)
-{
- u32 temp;
-
- __asm__ __volatile__(
- " .set push \n"
- " .set noreorder \n"
- " lw %0, %1 # read \n"
- " move %0, %0 # block \n"
- " .set pop \n"
- : "=&r" (temp)
- : "m" (*addr));
-
- return temp;
-}
-
-/*
- * For special strange cases only:
- *
- * If you need custom processing within a ll/sc loop, use the following macros
- * VERY CAREFULLY:
- *
- * u32 tmp; <-- Define a variable to hold the data
- *
- * custom_read_reg32(address, tmp); <-- Reads the address and put the value
- * in the 'tmp' variable given
- *
- * From here on out, you are (basically) atomic, so don't do anything too
- * fancy!
- * Also, this code may loop if the end of this block fails to write
- * everything back safely due do the other CPU, so do NOT do anything
- * with side-effects!
- *
- * custom_write_reg32(address, tmp); <-- Writes back 'tmp' safely.
- */
-#define custom_read_reg32(address, tmp) \
- __asm__ __volatile__( \
- " .set push \n" \
- " .set arch=r4000 \n" \
- "1: ll %0, %1 #custom_read_reg32 \n" \
- " .set pop \n" \
- : "=r" (tmp), "=" GCC_OFF_SMALL_ASM() (*address) \
- : GCC_OFF_SMALL_ASM() (*address))
-
-#define custom_write_reg32(address, tmp) \
- __asm__ __volatile__( \
- " .set push \n" \
- " .set arch=r4000 \n" \
- " sc %0, %1 #custom_write_reg32 \n" \
- " "__beqz"%0, 1b \n" \
- " nop \n" \
- " .set pop \n" \
- : "=&r" (tmp), "=" GCC_OFF_SMALL_ASM() (*address) \
- : "0" (tmp), GCC_OFF_SMALL_ASM() (*address))
-
-#endif /* __ASM_REGOPS_H__ */
diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regs.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regs.h
deleted file mode 100644
index e2ce9be51f3f..000000000000
--- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_regs.h
+++ /dev/null
@@ -1,652 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Defines for the address space, registers and register configuration
- * (bit masks, access macros etc) for the PMC-Sierra line of MSP products.
- * This file contains addess maps for all the devices in the line of
- * products but only has register definitions and configuration masks for
- * registers which aren't definitely associated with any device. Things
- * like clock settings, reset access, the ELB etc. Individual device
- * drivers will reference the appropriate XXX_BASE value defined here
- * and have individual registers offset from that.
- *
- * Copyright (C) 2005-2007 PMC-Sierra, Inc. All rights reserved.
- * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
- *
- * ########################################################################
- *
- * ########################################################################
- */
-
-#include <asm/addrspace.h>
-#include <linux/types.h>
-
-#ifndef _ASM_MSP_REGS_H
-#define _ASM_MSP_REGS_H
-
-/*
- ########################################################################
- # Address space and device base definitions #
- ########################################################################
- */
-
-/*
- ***************************************************************************
- * System Logic and Peripherals (ELB, UART0, etc) device address space *
- ***************************************************************************
- */
-#define MSP_SLP_BASE 0x1c000000
- /* System Logic and Peripherals */
-#define MSP_RST_BASE (MSP_SLP_BASE + 0x10)
- /* System reset register base */
-#define MSP_RST_SIZE 0x0C /* System reset register space */
-
-#define MSP_WTIMER_BASE (MSP_SLP_BASE + 0x04C)
- /* watchdog timer base */
-#define MSP_ITIMER_BASE (MSP_SLP_BASE + 0x054)
- /* internal timer base */
-#define MSP_UART0_BASE (MSP_SLP_BASE + 0x100)
- /* UART0 controller base */
-#define MSP_BCPY_CTRL_BASE (MSP_SLP_BASE + 0x120)
- /* Block Copy controller base */
-#define MSP_BCPY_DESC_BASE (MSP_SLP_BASE + 0x160)
- /* Block Copy descriptor base */
-
-/*
- ***************************************************************************
- * PCI address space *
- ***************************************************************************
- */
-#define MSP_PCI_BASE 0x19000000
-
-/*
- ***************************************************************************
- * MSbus device address space *
- ***************************************************************************
- */
-#define MSP_MSB_BASE 0x18000000
- /* MSbus address start */
-#define MSP_PER_BASE (MSP_MSB_BASE + 0x400000)
- /* Peripheral device registers */
-#define MSP_MAC0_BASE (MSP_MSB_BASE + 0x600000)
- /* MAC A device registers */
-#define MSP_MAC1_BASE (MSP_MSB_BASE + 0x700000)
- /* MAC B device registers */
-#define MSP_MAC_SIZE 0xE0 /* MAC register space */
-
-#define MSP_SEC_BASE (MSP_MSB_BASE + 0x800000)
- /* Security Engine registers */
-#define MSP_MAC2_BASE (MSP_MSB_BASE + 0x900000)
- /* MAC C device registers */
-#define MSP_ADSL2_BASE (MSP_MSB_BASE + 0xA80000)
- /* ADSL2 device registers */
-#define MSP_USB0_BASE (MSP_MSB_BASE + 0xB00000)
- /* USB0 device registers */
-#define MSP_USB1_BASE (MSP_MSB_BASE + 0x300000)
- /* USB1 device registers */
-#define MSP_CPUIF_BASE (MSP_MSB_BASE + 0xC00000)
- /* CPU interface registers */
-
-/* Devices within the MSbus peripheral block */
-#define MSP_UART1_BASE (MSP_PER_BASE + 0x030)
- /* UART1 controller base */
-#define MSP_SPI_BASE (MSP_PER_BASE + 0x058)
- /* SPI/MPI control registers */
-#define MSP_TWI_BASE (MSP_PER_BASE + 0x090)
- /* Two-wire control registers */
-#define MSP_PTIMER_BASE (MSP_PER_BASE + 0x0F0)
- /* Programmable timer control */
-
-/*
- ***************************************************************************
- * Physical Memory configuration address space *
- ***************************************************************************
- */
-#define MSP_MEM_CFG_BASE 0x17f00000
-
-#define MSP_MEM_INDIRECT_CTL_10 0x10
-
-/*
- * Notes:
- * 1) The SPI registers are split into two blocks, one offset from the
- * MSP_SPI_BASE by 0x00 and the other offset from the MSP_SPI_BASE by
- * 0x68. The SPI driver definitions for the register must be aware
- * of this.
- * 2) The block copy engine register are divided into two regions, one
- * for the control/configuration of the engine proper and one for the
- * values of the descriptors used in the copy process. These have
- * different base defines (CTRL_BASE vs DESC_BASE)
- * 3) These constants are for physical addresses which means that they
- * work correctly with "ioremap" and friends. This means that device
- * drivers will need to remap these addresses using ioremap and perhaps
- * the readw/writew macros. Or they could use the regptr() macro
- * defined below, but the readw/writew calls are the correct thing.
- * 4) The UARTs have an additional status register offset from the base
- * address. This register isn't used in the standard 8250 driver but
- * may be used in other software. Consult the hardware datasheet for
- * offset details.
- * 5) For some unknown reason the security engine (MSP_SEC_BASE) registers
- * start at an offset of 0x84 from the base address but the block of
- * registers before this is reserved for the security engine. The
- * driver will have to be aware of this but it makes the register
- * definitions line up better with the documentation.
- */
-
-/*
- ########################################################################
- # System register definitions. Not associated with a specific device #
- ########################################################################
- */
-
-/*
- * This macro maps the physical register number into uncached space
- * and (for C code) casts it into a u32 pointer so it can be dereferenced
- * Normally these would be accessed with ioremap and readX/writeX, but
- * these are convenient for a lot of internal kernel code.
- */
-#ifdef __ASSEMBLER__
- #define regptr(addr) (KSEG1ADDR(addr))
-#else
- #define regptr(addr) ((volatile u32 *const)(KSEG1ADDR(addr)))
-#endif
-
-/*
- ***************************************************************************
- * System Logic and Peripherals (RESET, ELB, etc) registers *
- ***************************************************************************
- */
-
-/* System Control register definitions */
-#define DEV_ID_REG regptr(MSP_SLP_BASE + 0x00)
- /* Device-ID RO */
-#define FWR_ID_REG regptr(MSP_SLP_BASE + 0x04)
- /* Firmware-ID Register RW */
-#define SYS_ID_REG0 regptr(MSP_SLP_BASE + 0x08)
- /* System-ID Register-0 RW */
-#define SYS_ID_REG1 regptr(MSP_SLP_BASE + 0x0C)
- /* System-ID Register-1 RW */
-
-/* System Reset register definitions */
-#define RST_STS_REG regptr(MSP_SLP_BASE + 0x10)
- /* System Reset Status RO */
-#define RST_SET_REG regptr(MSP_SLP_BASE + 0x14)
- /* System Set Reset WO */
-#define RST_CLR_REG regptr(MSP_SLP_BASE + 0x18)
- /* System Clear Reset WO */
-
-/* System Clock Registers */
-#define PCI_SLP_REG regptr(MSP_SLP_BASE + 0x1C)
- /* PCI clock generator RW */
-#define URT_SLP_REG regptr(MSP_SLP_BASE + 0x20)
- /* UART clock generator RW */
-/* reserved (MSP_SLP_BASE + 0x24) */
-/* reserved (MSP_SLP_BASE + 0x28) */
-#define PLL1_SLP_REG regptr(MSP_SLP_BASE + 0x2C)
- /* PLL1 clock generator RW */
-#define PLL0_SLP_REG regptr(MSP_SLP_BASE + 0x30)
- /* PLL0 clock generator RW */
-#define MIPS_SLP_REG regptr(MSP_SLP_BASE + 0x34)
- /* MIPS clock generator RW */
-#define VE_SLP_REG regptr(MSP_SLP_BASE + 0x38)
- /* Voice Eng clock generator RW */
-/* reserved (MSP_SLP_BASE + 0x3C) */
-#define MSB_SLP_REG regptr(MSP_SLP_BASE + 0x40)
- /* MS-Bus clock generator RW */
-#define SMAC_SLP_REG regptr(MSP_SLP_BASE + 0x44)
- /* Sec & MAC clock generator RW */
-#define PERF_SLP_REG regptr(MSP_SLP_BASE + 0x48)
- /* Per & TDM clock generator RW */
-
-/* Interrupt Controller Registers */
-#define SLP_INT_STS_REG regptr(MSP_SLP_BASE + 0x70)
- /* Interrupt status register RW */
-#define SLP_INT_MSK_REG regptr(MSP_SLP_BASE + 0x74)
- /* Interrupt enable/mask RW */
-#define SE_MBOX_REG regptr(MSP_SLP_BASE + 0x78)
- /* Security Engine mailbox RW */
-#define VE_MBOX_REG regptr(MSP_SLP_BASE + 0x7C)
- /* Voice Engine mailbox RW */
-
-/* ELB Controller Registers */
-#define CS0_CNFG_REG regptr(MSP_SLP_BASE + 0x80)
- /* ELB CS0 Configuration Reg */
-#define CS0_ADDR_REG regptr(MSP_SLP_BASE + 0x84)
- /* ELB CS0 Base Address Reg */
-#define CS0_MASK_REG regptr(MSP_SLP_BASE + 0x88)
- /* ELB CS0 Mask Register */
-#define CS0_ACCESS_REG regptr(MSP_SLP_BASE + 0x8C)
- /* ELB CS0 access register */
-
-#define CS1_CNFG_REG regptr(MSP_SLP_BASE + 0x90)
- /* ELB CS1 Configuration Reg */
-#define CS1_ADDR_REG regptr(MSP_SLP_BASE + 0x94)
- /* ELB CS1 Base Address Reg */
-#define CS1_MASK_REG regptr(MSP_SLP_BASE + 0x98)
- /* ELB CS1 Mask Register */
-#define CS1_ACCESS_REG regptr(MSP_SLP_BASE + 0x9C)
- /* ELB CS1 access register */
-
-#define CS2_CNFG_REG regptr(MSP_SLP_BASE + 0xA0)
- /* ELB CS2 Configuration Reg */
-#define CS2_ADDR_REG regptr(MSP_SLP_BASE + 0xA4)
- /* ELB CS2 Base Address Reg */
-#define CS2_MASK_REG regptr(MSP_SLP_BASE + 0xA8)
- /* ELB CS2 Mask Register */
-#define CS2_ACCESS_REG regptr(MSP_SLP_BASE + 0xAC)
- /* ELB CS2 access register */
-
-#define CS3_CNFG_REG regptr(MSP_SLP_BASE + 0xB0)
- /* ELB CS3 Configuration Reg */
-#define CS3_ADDR_REG regptr(MSP_SLP_BASE + 0xB4)
- /* ELB CS3 Base Address Reg */
-#define CS3_MASK_REG regptr(MSP_SLP_BASE + 0xB8)
- /* ELB CS3 Mask Register */
-#define CS3_ACCESS_REG regptr(MSP_SLP_BASE + 0xBC)
- /* ELB CS3 access register */
-
-#define CS4_CNFG_REG regptr(MSP_SLP_BASE + 0xC0)
- /* ELB CS4 Configuration Reg */
-#define CS4_ADDR_REG regptr(MSP_SLP_BASE + 0xC4)
- /* ELB CS4 Base Address Reg */
-#define CS4_MASK_REG regptr(MSP_SLP_BASE + 0xC8)
- /* ELB CS4 Mask Register */
-#define CS4_ACCESS_REG regptr(MSP_SLP_BASE + 0xCC)
- /* ELB CS4 access register */
-
-#define CS5_CNFG_REG regptr(MSP_SLP_BASE + 0xD0)
- /* ELB CS5 Configuration Reg */
-#define CS5_ADDR_REG regptr(MSP_SLP_BASE + 0xD4)
- /* ELB CS5 Base Address Reg */
-#define CS5_MASK_REG regptr(MSP_SLP_BASE + 0xD8)
- /* ELB CS5 Mask Register */
-#define CS5_ACCESS_REG regptr(MSP_SLP_BASE + 0xDC)
- /* ELB CS5 access register */
-
-/* reserved 0xE0 - 0xE8 */
-#define ELB_1PC_EN_REG regptr(MSP_SLP_BASE + 0xEC)
- /* ELB single PC card detect */
-
-/* reserved 0xF0 - 0xF8 */
-#define ELB_CLK_CFG_REG regptr(MSP_SLP_BASE + 0xFC)
- /* SDRAM read/ELB timing Reg */
-
-/* Extended UART status registers */
-#define UART0_STATUS_REG regptr(MSP_UART0_BASE + 0x0c0)
- /* UART Status Register 0 */
-#define UART1_STATUS_REG regptr(MSP_UART1_BASE + 0x170)
- /* UART Status Register 1 */
-
-/* Performance monitoring registers */
-#define PERF_MON_CTRL_REG regptr(MSP_SLP_BASE + 0x140)
- /* Performance monitor control */
-#define PERF_MON_CLR_REG regptr(MSP_SLP_BASE + 0x144)
- /* Performance monitor clear */
-#define PERF_MON_CNTH_REG regptr(MSP_SLP_BASE + 0x148)
- /* Perf monitor counter high */
-#define PERF_MON_CNTL_REG regptr(MSP_SLP_BASE + 0x14C)
- /* Perf monitor counter low */
-
-/* System control registers */
-#define SYS_CTRL_REG regptr(MSP_SLP_BASE + 0x150)
- /* System control register */
-#define SYS_ERR1_REG regptr(MSP_SLP_BASE + 0x154)
- /* System Error status 1 */
-#define SYS_ERR2_REG regptr(MSP_SLP_BASE + 0x158)
- /* System Error status 2 */
-#define SYS_INT_CFG_REG regptr(MSP_SLP_BASE + 0x15C)
- /* System Interrupt config */
-
-/* Voice Engine Memory configuration */
-#define VE_MEM_REG regptr(MSP_SLP_BASE + 0x17C)
- /* Voice engine memory config */
-
-/* CPU/SLP Error Status registers */
-#define CPU_ERR1_REG regptr(MSP_SLP_BASE + 0x180)
- /* CPU/SLP Error status 1 */
-#define CPU_ERR2_REG regptr(MSP_SLP_BASE + 0x184)
- /* CPU/SLP Error status 1 */
-
-/* Extended GPIO registers */
-#define EXTENDED_GPIO1_REG regptr(MSP_SLP_BASE + 0x188)
-#define EXTENDED_GPIO2_REG regptr(MSP_SLP_BASE + 0x18c)
-#define EXTENDED_GPIO_REG EXTENDED_GPIO1_REG
- /* Backward-compatibility */
-
-/* System Error registers */
-#define SLP_ERR_STS_REG regptr(MSP_SLP_BASE + 0x190)
- /* Int status for SLP errors */
-#define SLP_ERR_MSK_REG regptr(MSP_SLP_BASE + 0x194)
- /* Int mask for SLP errors */
-#define SLP_ELB_ERST_REG regptr(MSP_SLP_BASE + 0x198)
- /* External ELB reset */
-#define SLP_BOOT_STS_REG regptr(MSP_SLP_BASE + 0x19C)
- /* Boot Status */
-
-/* Extended ELB addressing */
-#define CS0_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A0)
- /* CS0 Extended address */
-#define CS1_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A4)
- /* CS1 Extended address */
-#define CS2_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1A8)
- /* CS2 Extended address */
-#define CS3_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1AC)
- /* CS3 Extended address */
-/* reserved 0x1B0 */
-#define CS5_EXT_ADDR_REG regptr(MSP_SLP_BASE + 0x1B4)
- /* CS5 Extended address */
-
-/* PLL Adjustment registers */
-#define PLL_LOCK_REG regptr(MSP_SLP_BASE + 0x200)
- /* PLL0 lock status */
-#define PLL_ARST_REG regptr(MSP_SLP_BASE + 0x204)
- /* PLL Analog reset status */
-#define PLL0_ADJ_REG regptr(MSP_SLP_BASE + 0x208)
- /* PLL0 Adjustment value */
-#define PLL1_ADJ_REG regptr(MSP_SLP_BASE + 0x20C)
- /* PLL1 Adjustment value */
-
-/*
- ***************************************************************************
- * Peripheral Register definitions *
- ***************************************************************************
- */
-
-/* Peripheral status */
-#define PER_CTRL_REG regptr(MSP_PER_BASE + 0x50)
- /* Peripheral control register */
-#define PER_STS_REG regptr(MSP_PER_BASE + 0x54)
- /* Peripheral status register */
-
-/* SPI/MPI Registers */
-#define SMPI_TX_SZ_REG regptr(MSP_PER_BASE + 0x58)
- /* SPI/MPI Tx Size register */
-#define SMPI_RX_SZ_REG regptr(MSP_PER_BASE + 0x5C)
- /* SPI/MPI Rx Size register */
-#define SMPI_CTL_REG regptr(MSP_PER_BASE + 0x60)
- /* SPI/MPI Control register */
-#define SMPI_MS_REG regptr(MSP_PER_BASE + 0x64)
- /* SPI/MPI Chip Select reg */
-#define SMPI_CORE_DATA_REG regptr(MSP_PER_BASE + 0xC0)
- /* SPI/MPI Core Data reg */
-#define SMPI_CORE_CTRL_REG regptr(MSP_PER_BASE + 0xC4)
- /* SPI/MPI Core Control reg */
-#define SMPI_CORE_STAT_REG regptr(MSP_PER_BASE + 0xC8)
- /* SPI/MPI Core Status reg */
-#define SMPI_CORE_SSEL_REG regptr(MSP_PER_BASE + 0xCC)
- /* SPI/MPI Core Ssel reg */
-#define SMPI_FIFO_REG regptr(MSP_PER_BASE + 0xD0)
- /* SPI/MPI Data FIFO reg */
-
-/* Peripheral Block Error Registers */
-#define PER_ERR_STS_REG regptr(MSP_PER_BASE + 0x70)
- /* Error Bit Status Register */
-#define PER_ERR_MSK_REG regptr(MSP_PER_BASE + 0x74)
- /* Error Bit Mask Register */
-#define PER_HDR1_REG regptr(MSP_PER_BASE + 0x78)
- /* Error Header 1 Register */
-#define PER_HDR2_REG regptr(MSP_PER_BASE + 0x7C)
- /* Error Header 2 Register */
-
-/* Peripheral Block Interrupt Registers */
-#define PER_INT_STS_REG regptr(MSP_PER_BASE + 0x80)
- /* Interrupt status register */
-#define PER_INT_MSK_REG regptr(MSP_PER_BASE + 0x84)
- /* Interrupt Mask Register */
-#define GPIO_INT_STS_REG regptr(MSP_PER_BASE + 0x88)
- /* GPIO interrupt status reg */
-#define GPIO_INT_MSK_REG regptr(MSP_PER_BASE + 0x8C)
- /* GPIO interrupt MASK Reg */
-
-/* POLO GPIO registers */
-#define POLO_GPIO_DAT1_REG regptr(MSP_PER_BASE + 0x0E0)
- /* Polo GPIO[8:0] data reg */
-#define POLO_GPIO_CFG1_REG regptr(MSP_PER_BASE + 0x0E4)
- /* Polo GPIO[7:0] config reg */
-#define POLO_GPIO_CFG2_REG regptr(MSP_PER_BASE + 0x0E8)
- /* Polo GPIO[15:8] config reg */
-#define POLO_GPIO_OD1_REG regptr(MSP_PER_BASE + 0x0EC)
- /* Polo GPIO[31:0] output drive */
-#define POLO_GPIO_CFG3_REG regptr(MSP_PER_BASE + 0x170)
- /* Polo GPIO[23:16] config reg */
-#define POLO_GPIO_DAT2_REG regptr(MSP_PER_BASE + 0x174)
- /* Polo GPIO[15:9] data reg */
-#define POLO_GPIO_DAT3_REG regptr(MSP_PER_BASE + 0x178)
- /* Polo GPIO[23:16] data reg */
-#define POLO_GPIO_DAT4_REG regptr(MSP_PER_BASE + 0x17C)
- /* Polo GPIO[31:24] data reg */
-#define POLO_GPIO_DAT5_REG regptr(MSP_PER_BASE + 0x180)
- /* Polo GPIO[39:32] data reg */
-#define POLO_GPIO_DAT6_REG regptr(MSP_PER_BASE + 0x184)
- /* Polo GPIO[47:40] data reg */
-#define POLO_GPIO_DAT7_REG regptr(MSP_PER_BASE + 0x188)
- /* Polo GPIO[54:48] data reg */
-#define POLO_GPIO_CFG4_REG regptr(MSP_PER_BASE + 0x18C)
- /* Polo GPIO[31:24] config reg */
-#define POLO_GPIO_CFG5_REG regptr(MSP_PER_BASE + 0x190)
- /* Polo GPIO[39:32] config reg */
-#define POLO_GPIO_CFG6_REG regptr(MSP_PER_BASE + 0x194)
- /* Polo GPIO[47:40] config reg */
-#define POLO_GPIO_CFG7_REG regptr(MSP_PER_BASE + 0x198)
- /* Polo GPIO[54:48] config reg */
-#define POLO_GPIO_OD2_REG regptr(MSP_PER_BASE + 0x19C)
- /* Polo GPIO[54:32] output drive */
-
-/* Generic GPIO registers */
-#define GPIO_DATA1_REG regptr(MSP_PER_BASE + 0x170)
- /* GPIO[1:0] data register */
-#define GPIO_DATA2_REG regptr(MSP_PER_BASE + 0x174)
- /* GPIO[5:2] data register */
-#define GPIO_DATA3_REG regptr(MSP_PER_BASE + 0x178)
- /* GPIO[9:6] data register */
-#define GPIO_DATA4_REG regptr(MSP_PER_BASE + 0x17C)
- /* GPIO[15:10] data register */
-#define GPIO_CFG1_REG regptr(MSP_PER_BASE + 0x180)
- /* GPIO[1:0] config register */
-#define GPIO_CFG2_REG regptr(MSP_PER_BASE + 0x184)
- /* GPIO[5:2] config register */
-#define GPIO_CFG3_REG regptr(MSP_PER_BASE + 0x188)
- /* GPIO[9:6] config register */
-#define GPIO_CFG4_REG regptr(MSP_PER_BASE + 0x18C)
- /* GPIO[15:10] config register */
-#define GPIO_OD_REG regptr(MSP_PER_BASE + 0x190)
- /* GPIO[15:0] output drive */
-
-/*
- ***************************************************************************
- * CPU Interface register definitions *
- ***************************************************************************
- */
-#define PCI_FLUSH_REG regptr(MSP_CPUIF_BASE + 0x00)
- /* PCI-SDRAM queue flush trigger */
-#define OCP_ERR1_REG regptr(MSP_CPUIF_BASE + 0x04)
- /* OCP Error Attribute 1 */
-#define OCP_ERR2_REG regptr(MSP_CPUIF_BASE + 0x08)
- /* OCP Error Attribute 2 */
-#define OCP_STS_REG regptr(MSP_CPUIF_BASE + 0x0C)
- /* OCP Error Status */
-#define CPUIF_PM_REG regptr(MSP_CPUIF_BASE + 0x10)
- /* CPU policy configuration */
-#define CPUIF_CFG_REG regptr(MSP_CPUIF_BASE + 0x10)
- /* Misc configuration options */
-
-/* Central Interrupt Controller Registers */
-#define MSP_CIC_BASE (MSP_CPUIF_BASE + 0x8000)
- /* Central Interrupt registers */
-#define CIC_EXT_CFG_REG regptr(MSP_CIC_BASE + 0x00)
- /* External interrupt config */
-#define CIC_STS_REG regptr(MSP_CIC_BASE + 0x04)
- /* CIC Interrupt Status */
-#define CIC_VPE0_MSK_REG regptr(MSP_CIC_BASE + 0x08)
- /* VPE0 Interrupt Mask */
-#define CIC_VPE1_MSK_REG regptr(MSP_CIC_BASE + 0x0C)
- /* VPE1 Interrupt Mask */
-#define CIC_TC0_MSK_REG regptr(MSP_CIC_BASE + 0x10)
- /* Thread Context 0 Int Mask */
-#define CIC_TC1_MSK_REG regptr(MSP_CIC_BASE + 0x14)
- /* Thread Context 1 Int Mask */
-#define CIC_TC2_MSK_REG regptr(MSP_CIC_BASE + 0x18)
- /* Thread Context 2 Int Mask */
-#define CIC_TC3_MSK_REG regptr(MSP_CIC_BASE + 0x18)
- /* Thread Context 3 Int Mask */
-#define CIC_TC4_MSK_REG regptr(MSP_CIC_BASE + 0x18)
- /* Thread Context 4 Int Mask */
-#define CIC_PCIMSI_STS_REG regptr(MSP_CIC_BASE + 0x18)
-#define CIC_PCIMSI_MSK_REG regptr(MSP_CIC_BASE + 0x18)
-#define CIC_PCIFLSH_REG regptr(MSP_CIC_BASE + 0x18)
-#define CIC_VPE0_SWINT_REG regptr(MSP_CIC_BASE + 0x08)
-
-
-/*
- ***************************************************************************
- * Memory controller registers *
- ***************************************************************************
- */
-#define MEM_CFG1_REG regptr(MSP_MEM_CFG_BASE + 0x00)
-#define MEM_SS_ADDR regptr(MSP_MEM_CFG_BASE + 0x00)
-#define MEM_SS_DATA regptr(MSP_MEM_CFG_BASE + 0x04)
-#define MEM_SS_WRITE regptr(MSP_MEM_CFG_BASE + 0x08)
-
-/*
- ***************************************************************************
- * PCI controller registers *
- ***************************************************************************
- */
-#define PCI_BASE_REG regptr(MSP_PCI_BASE + 0x00)
-#define PCI_CONFIG_SPACE_REG regptr(MSP_PCI_BASE + 0x800)
-#define PCI_JTAG_DEVID_REG regptr(MSP_SLP_BASE + 0x13c)
-
-/*
- ########################################################################
- # Register content & macro definitions #
- ########################################################################
- */
-
-/*
- ***************************************************************************
- * DEV_ID defines *
- ***************************************************************************
- */
-#define DEV_ID_PCI_DIS (1 << 26) /* Set if PCI disabled */
-#define DEV_ID_PCI_HOST (1 << 20) /* Set if PCI host */
-#define DEV_ID_SINGLE_PC (1 << 19) /* Set if single PC Card */
-#define DEV_ID_FAMILY (0xff << 8) /* family ID code */
-#define POLO_ZEUS_SUB_FAMILY (0x7 << 16) /* sub family for Polo/Zeus */
-
-#define MSPFPGA_ID (0x00 << 8) /* you are on your own here */
-#define MSP5000_ID (0x50 << 8)
-#define MSP4F00_ID (0x4f << 8) /* FPGA version of MSP4200 */
-#define MSP4E00_ID (0x4f << 8) /* FPGA version of MSP7120 */
-#define MSP4200_ID (0x42 << 8)
-#define MSP4000_ID (0x40 << 8)
-#define MSP2XXX_ID (0x20 << 8)
-#define MSPZEUS_ID (0x10 << 8)
-
-#define MSP2004_SUB_ID (0x0 << 16)
-#define MSP2005_SUB_ID (0x1 << 16)
-#define MSP2006_SUB_ID (0x1 << 16)
-#define MSP2007_SUB_ID (0x2 << 16)
-#define MSP2010_SUB_ID (0x3 << 16)
-#define MSP2015_SUB_ID (0x4 << 16)
-#define MSP2020_SUB_ID (0x5 << 16)
-#define MSP2100_SUB_ID (0x6 << 16)
-
-/*
- ***************************************************************************
- * RESET defines *
- ***************************************************************************
- */
-#define MSP_GR_RST (0x01 << 0) /* Global reset bit */
-#define MSP_MR_RST (0x01 << 1) /* MIPS reset bit */
-#define MSP_PD_RST (0x01 << 2) /* PVC DMA reset bit */
-#define MSP_PP_RST (0x01 << 3) /* PVC reset bit */
-/* reserved */
-#define MSP_EA_RST (0x01 << 6) /* Mac A reset bit */
-#define MSP_EB_RST (0x01 << 7) /* Mac B reset bit */
-#define MSP_SE_RST (0x01 << 8) /* Security Eng reset bit */
-#define MSP_PB_RST (0x01 << 9) /* Per block reset bit */
-#define MSP_EC_RST (0x01 << 10) /* Mac C reset bit */
-#define MSP_TW_RST (0x01 << 11) /* TWI reset bit */
-#define MSP_SPI_RST (0x01 << 12) /* SPI/MPI reset bit */
-#define MSP_U1_RST (0x01 << 13) /* UART1 reset bit */
-#define MSP_U0_RST (0x01 << 14) /* UART0 reset bit */
-
-/*
- ***************************************************************************
- * UART defines *
- ***************************************************************************
- */
-#define MSP_BASE_BAUD 25000000
-#define MSP_UART_REG_LEN 0x20
-
-/*
- ***************************************************************************
- * ELB defines *
- ***************************************************************************
- */
-#define PCCARD_32 0x02 /* Set if is PCCARD 32 (Cardbus) */
-#define SINGLE_PCCARD 0x01 /* Set to enable single PC card */
-
-/*
- ***************************************************************************
- * CIC defines *
- ***************************************************************************
- */
-
-/* CIC_EXT_CFG_REG */
-#define EXT_INT_POL(eirq) (1 << (eirq + 8))
-#define EXT_INT_EDGE(eirq) (1 << eirq)
-
-#define CIC_EXT_SET_TRIGGER_LEVEL(reg, eirq) (reg &= ~EXT_INT_EDGE(eirq))
-#define CIC_EXT_SET_TRIGGER_EDGE(reg, eirq) (reg |= EXT_INT_EDGE(eirq))
-#define CIC_EXT_SET_ACTIVE_HI(reg, eirq) (reg |= EXT_INT_POL(eirq))
-#define CIC_EXT_SET_ACTIVE_LO(reg, eirq) (reg &= ~EXT_INT_POL(eirq))
-#define CIC_EXT_SET_ACTIVE_RISING CIC_EXT_SET_ACTIVE_HI
-#define CIC_EXT_SET_ACTIVE_FALLING CIC_EXT_SET_ACTIVE_LO
-
-#define CIC_EXT_IS_TRIGGER_LEVEL(reg, eirq) \
- ((reg & EXT_INT_EDGE(eirq)) == 0)
-#define CIC_EXT_IS_TRIGGER_EDGE(reg, eirq) (reg & EXT_INT_EDGE(eirq))
-#define CIC_EXT_IS_ACTIVE_HI(reg, eirq) (reg & EXT_INT_POL(eirq))
-#define CIC_EXT_IS_ACTIVE_LO(reg, eirq) \
- ((reg & EXT_INT_POL(eirq)) == 0)
-#define CIC_EXT_IS_ACTIVE_RISING CIC_EXT_IS_ACTIVE_HI
-#define CIC_EXT_IS_ACTIVE_FALLING CIC_EXT_IS_ACTIVE_LO
-
-/*
- ***************************************************************************
- * Memory Controller defines *
- ***************************************************************************
- */
-
-/* Indirect memory controller registers */
-#define DDRC_CFG(n) (n)
-#define DDRC_DEBUG(n) (0x04 + n)
-#define DDRC_CTL(n) (0x40 + n)
-
-/* Macro to perform DDRC indirect write */
-#define DDRC_INDIRECT_WRITE(reg, mask, value) \
-({ \
- *MEM_SS_ADDR = (((mask) & 0xf) << 8) | ((reg) & 0xff); \
- *MEM_SS_DATA = (value); \
- *MEM_SS_WRITE = 1; \
-})
-
-/*
- ***************************************************************************
- * SPI/MPI Mode *
- ***************************************************************************
- */
-#define SPI_MPI_RX_BUSY 0x00008000 /* SPI/MPI Receive Busy */
-#define SPI_MPI_FIFO_EMPTY 0x00004000 /* SPI/MPI Fifo Empty */
-#define SPI_MPI_TX_BUSY 0x00002000 /* SPI/MPI Transmit Busy */
-#define SPI_MPI_FIFO_FULL 0x00001000 /* SPI/MPU FIFO full */
-
-/*
- ***************************************************************************
- * SPI/MPI Control Register *
- ***************************************************************************
- */
-#define SPI_MPI_RX_START 0x00000004 /* Start receive command */
-#define SPI_MPI_FLUSH_Q 0x00000002 /* Flush SPI/MPI Queue */
-#define SPI_MPI_TX_START 0x00000001 /* Start Transmit Command */
-
-#endif /* !_ASM_MSP_REGS_H */
diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_slp_int.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_slp_int.h
deleted file mode 100644
index 9a763eb5e5f5..000000000000
--- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_slp_int.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Defines for the MSP interrupt controller.
- *
- * Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved.
- * Author: Carsten Langgaard, carstenl@mips.com
- *
- * ########################################################################
- *
- * ########################################################################
- */
-
-#ifndef _MSP_SLP_INT_H
-#define _MSP_SLP_INT_H
-
-/*
- * The PMC-Sierra SLP interrupts are arranged in a 3 level cascaded
- * hierarchical system. The first level are the direct MIPS interrupts
- * and are assigned the interrupt range 0-7. The second level is the SLM
- * interrupt controller and is assigned the range 8-39. The third level
- * comprises the Peripherial block, the PCI block, the PCI MSI block and
- * the SLP. The PCI interrupts and the SLP errors are handled by the
- * relevant subsystems so the core interrupt code needs only concern
- * itself with the Peripheral block. These are assigned interrupts in
- * the range 40-71.
- */
-
-/*
- * IRQs directly connected to CPU
- */
-#define MSP_MIPS_INTBASE 0
-#define MSP_INT_SW0 0 /* IRQ for swint0, C_SW0 */
-#define MSP_INT_SW1 1 /* IRQ for swint1, C_SW1 */
-#define MSP_INT_MAC0 2 /* IRQ for MAC 0, C_IRQ0 */
-#define MSP_INT_MAC1 3 /* IRQ for MAC 1, C_IRQ1 */
-#define MSP_INT_C_IRQ2 4 /* Wired off, C_IRQ2 */
-#define MSP_INT_VE 5 /* IRQ for Voice Engine, C_IRQ3 */
-#define MSP_INT_SLP 6 /* IRQ for SLM block, C_IRQ4 */
-#define MSP_INT_TIMER 7 /* IRQ for the MIPS timer, C_IRQ5 */
-
-/*
- * IRQs cascaded on CPU interrupt 4 (CAUSE bit 12, C_IRQ4)
- * These defines should be tied to the register definition for the SLM
- * interrupt routine. For now, just use hard-coded values.
- */
-#define MSP_SLP_INTBASE (MSP_MIPS_INTBASE + 8)
-#define MSP_INT_EXT0 (MSP_SLP_INTBASE + 0)
- /* External interrupt 0 */
-#define MSP_INT_EXT1 (MSP_SLP_INTBASE + 1)
- /* External interrupt 1 */
-#define MSP_INT_EXT2 (MSP_SLP_INTBASE + 2)
- /* External interrupt 2 */
-#define MSP_INT_EXT3 (MSP_SLP_INTBASE + 3)
- /* External interrupt 3 */
-/* Reserved 4-7 */
-
-/*
- *************************************************************************
- * DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER/DANGER *
- * Some MSP produces have this interrupt labelled as Voice and some are *
- * SEC mbox ... *
- *************************************************************************
- */
-#define MSP_INT_SLP_VE (MSP_SLP_INTBASE + 8)
- /* Cascaded IRQ for Voice Engine*/
-#define MSP_INT_SLP_TDM (MSP_SLP_INTBASE + 9)
- /* TDM interrupt */
-#define MSP_INT_SLP_MAC0 (MSP_SLP_INTBASE + 10)
- /* Cascaded IRQ for MAC 0 */
-#define MSP_INT_SLP_MAC1 (MSP_SLP_INTBASE + 11)
- /* Cascaded IRQ for MAC 1 */
-#define MSP_INT_SEC (MSP_SLP_INTBASE + 12)
- /* IRQ for security engine */
-#define MSP_INT_PER (MSP_SLP_INTBASE + 13)
- /* Peripheral interrupt */
-#define MSP_INT_TIMER0 (MSP_SLP_INTBASE + 14)
- /* SLP timer 0 */
-#define MSP_INT_TIMER1 (MSP_SLP_INTBASE + 15)
- /* SLP timer 1 */
-#define MSP_INT_TIMER2 (MSP_SLP_INTBASE + 16)
- /* SLP timer 2 */
-#define MSP_INT_SLP_TIMER (MSP_SLP_INTBASE + 17)
- /* Cascaded MIPS timer */
-#define MSP_INT_BLKCP (MSP_SLP_INTBASE + 18)
- /* Block Copy */
-#define MSP_INT_UART0 (MSP_SLP_INTBASE + 19)
- /* UART 0 */
-#define MSP_INT_PCI (MSP_SLP_INTBASE + 20)
- /* PCI subsystem */
-#define MSP_INT_PCI_DBELL (MSP_SLP_INTBASE + 21)
- /* PCI doorbell */
-#define MSP_INT_PCI_MSI (MSP_SLP_INTBASE + 22)
- /* PCI Message Signal */
-#define MSP_INT_PCI_BC0 (MSP_SLP_INTBASE + 23)
- /* PCI Block Copy 0 */
-#define MSP_INT_PCI_BC1 (MSP_SLP_INTBASE + 24)
- /* PCI Block Copy 1 */
-#define MSP_INT_SLP_ERR (MSP_SLP_INTBASE + 25)
- /* SLP error condition */
-#define MSP_INT_MAC2 (MSP_SLP_INTBASE + 26)
- /* IRQ for MAC2 */
-/* Reserved 26-31 */
-
-/*
- * IRQs cascaded on SLP PER interrupt (MSP_INT_PER)
- */
-#define MSP_PER_INTBASE (MSP_SLP_INTBASE + 32)
-/* Reserved 0-1 */
-#define MSP_INT_UART1 (MSP_PER_INTBASE + 2)
- /* UART 1 */
-/* Reserved 3-5 */
-#define MSP_INT_2WIRE (MSP_PER_INTBASE + 6)
- /* 2-wire */
-#define MSP_INT_TM0 (MSP_PER_INTBASE + 7)
- /* Peripheral timer block out 0 */
-#define MSP_INT_TM1 (MSP_PER_INTBASE + 8)
- /* Peripheral timer block out 1 */
-/* Reserved 9 */
-#define MSP_INT_SPRX (MSP_PER_INTBASE + 10)
- /* SPI RX complete */
-#define MSP_INT_SPTX (MSP_PER_INTBASE + 11)
- /* SPI TX complete */
-#define MSP_INT_GPIO (MSP_PER_INTBASE + 12)
- /* GPIO */
-#define MSP_INT_PER_ERR (MSP_PER_INTBASE + 13)
- /* Peripheral error */
-/* Reserved 14-31 */
-
-#endif /* !_MSP_SLP_INT_H */
diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_usb.h b/arch/mips/include/asm/mach-pmcs-msp71xx/msp_usb.h
deleted file mode 100644
index 3cc3edb336b6..000000000000
--- a/arch/mips/include/asm/mach-pmcs-msp71xx/msp_usb.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/******************************************************************
- * Copyright (c) 2000-2007 PMC-Sierra INC.
- *
- * PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND
- * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS
- * SOFTWARE.
- */
-#ifndef MSP_USB_H_
-#define MSP_USB_H_
-
-#define NUM_USB_DEVS 1
-
-/* Register spaces for USB host 0 */
-#define MSP_USB0_MAB_START (MSP_USB0_BASE + 0x0)
-#define MSP_USB0_MAB_END (MSP_USB0_BASE + 0x17)
-#define MSP_USB0_ID_START (MSP_USB0_BASE + 0x40000)
-#define MSP_USB0_ID_END (MSP_USB0_BASE + 0x4008f)
-#define MSP_USB0_HS_START (MSP_USB0_BASE + 0x40100)
-#define MSP_USB0_HS_END (MSP_USB0_BASE + 0x401FF)
-
-/* Register spaces for USB host 1 */
-#define MSP_USB1_MAB_START (MSP_USB1_BASE + 0x0)
-#define MSP_USB1_MAB_END (MSP_USB1_BASE + 0x17)
-#define MSP_USB1_ID_START (MSP_USB1_BASE + 0x40000)
-#define MSP_USB1_ID_END (MSP_USB1_BASE + 0x4008f)
-#define MSP_USB1_HS_START (MSP_USB1_BASE + 0x40100)
-#define MSP_USB1_HS_END (MSP_USB1_BASE + 0x401ff)
-
-/* USB Identification registers */
-struct msp_usbid_regs {
- u32 id; /* 0x0: Identification register */
- u32 hwgen; /* 0x4: General HW params */
- u32 hwhost; /* 0x8: Host HW params */
- u32 hwdev; /* 0xc: Device HW params */
- u32 hwtxbuf; /* 0x10: Tx buffer HW params */
- u32 hwrxbuf; /* 0x14: Rx buffer HW params */
- u32 reserved[26];
- u32 timer0_load; /* 0x80: General-purpose timer 0 load*/
- u32 timer0_ctrl; /* 0x84: General-purpose timer 0 control */
- u32 timer1_load; /* 0x88: General-purpose timer 1 load*/
- u32 timer1_ctrl; /* 0x8c: General-purpose timer 1 control */
-};
-
-/* MSBus to AMBA registers */
-struct msp_mab_regs {
- u32 isr; /* 0x0: Interrupt status */
- u32 imr; /* 0x4: Interrupt mask */
- u32 thcr0; /* 0x8: Transaction header capture 0 */
- u32 thcr1; /* 0xc: Transaction header capture 1 */
- u32 int_stat; /* 0x10: Interrupt status summary */
- u32 phy_cfg; /* 0x14: USB phy config */
-};
-
-/* EHCI registers */
-struct msp_usbhs_regs {
- u32 hciver; /* 0x0: Version and offset to operational regs */
- u32 hcsparams; /* 0x4: Host control structural parameters */
- u32 hccparams; /* 0x8: Host control capability parameters */
- u32 reserved0[5];
- u32 dciver; /* 0x20: Device interface version */
- u32 dccparams; /* 0x24: Device control capability parameters */
- u32 reserved1[6];
- u32 cmd; /* 0x40: USB command */
- u32 sts; /* 0x44: USB status */
- u32 int_ena; /* 0x48: USB interrupt enable */
- u32 frindex; /* 0x4c: Frame index */
- u32 reserved3;
- union {
- struct {
- u32 flb_addr; /* 0x54: Frame list base address */
- u32 next_async_addr; /* 0x58: next asynchronous addr */
- u32 ttctrl; /* 0x5c: embedded transaction translator
- async buffer status */
- u32 burst_size; /* 0x60: Controller burst size */
- u32 tx_fifo_ctrl; /* 0x64: Tx latency FIFO tuning */
- u32 reserved0[4];
- u32 endpt_nak; /* 0x78: Endpoint NAK */
- u32 endpt_nak_ena; /* 0x7c: Endpoint NAK enable */
- u32 cfg_flag; /* 0x80: Config flag */
- u32 port_sc1; /* 0x84: Port status & control 1 */
- u32 reserved1[7];
- u32 otgsc; /* 0xa4: OTG status & control */
- u32 mode; /* 0xa8: USB controller mode */
- } host;
-
- struct {
- u32 dev_addr; /* 0x54: Device address */
- u32 endpt_list_addr; /* 0x58: Endpoint list address */
- u32 reserved0[7];
- u32 endpt_nak; /* 0x74 */
- u32 endpt_nak_ctrl; /* 0x78 */
- u32 cfg_flag; /* 0x80 */
- u32 port_sc1; /* 0x84: Port status & control 1 */
- u32 reserved[7];
- u32 otgsc; /* 0xa4: OTG status & control */
- u32 mode; /* 0xa8: USB controller mode */
- u32 endpt_setup_stat; /* 0xac */
- u32 endpt_prime; /* 0xb0 */
- u32 endpt_flush; /* 0xb4 */
- u32 endpt_stat; /* 0xb8 */
- u32 endpt_complete; /* 0xbc */
- u32 endpt_ctrl0; /* 0xc0 */
- u32 endpt_ctrl1; /* 0xc4 */
- u32 endpt_ctrl2; /* 0xc8 */
- u32 endpt_ctrl3; /* 0xcc */
- } device;
- } u;
-};
-/*
- * Container for the more-generic platform_device.
- * This exists mainly as a way to map the non-standard register
- * spaces and make them accessible to the USB ISR.
- */
-struct mspusb_device {
- struct msp_mab_regs __iomem *mab_regs;
- struct msp_usbid_regs __iomem *usbid_regs;
- struct msp_usbhs_regs __iomem *usbhs_regs;
- struct platform_device dev;
-};
-
-#define to_mspusb_device(x) container_of((x), struct mspusb_device, dev)
-#define TO_HOST_ID(x) ((x) & 0x3)
-#endif /*MSP_USB_H_*/
diff --git a/arch/mips/include/asm/mach-pmcs-msp71xx/war.h b/arch/mips/include/asm/mach-pmcs-msp71xx/war.h
deleted file mode 100644
index 31c546f58bb5..000000000000
--- a/arch/mips/include/asm/mach-pmcs-msp71xx/war.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_PMC_SIERRA_WAR_H
-#define __ASM_MIPS_PMC_SIERRA_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 0
-#define R4600_V1_HIT_CACHEOP_WAR 0
-#define R4600_V2_HIT_CACHEOP_WAR 0
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-#define MIPS4K_ICACHE_REFILL_WAR 0
-#define MIPS_CACHE_SYNC_WAR 0
-#define TX49XX_ICACHE_INDEX_INV_WAR 0
-#define ICACHE_REFILLS_WORKAROUND_WAR 0
-#define R10000_LLSC_WAR 0
-#if defined(CONFIG_PMC_MSP7120_EVAL) || defined(CONFIG_PMC_MSP7120_GW) || \
- defined(CONFIG_PMC_MSP7120_FPGA)
-#define MIPS34K_MISSED_ITLB_WAR 1
-#else
-#define MIPS34K_MISSED_ITLB_WAR 0
-#endif
-
-#endif /* __ASM_MIPS_PMC_SIERRA_WAR_H */
diff --git a/arch/mips/include/asm/mach-ralink/mt7620/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/mt7620/cpu-feature-overrides.h
index 6ea5908f0c11..c4579f1705c2 100644
--- a/arch/mips/include/asm/mach-ralink/mt7620/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ralink/mt7620/cpu-feature-overrides.h
@@ -45,7 +45,6 @@
#define cpu_has_64bits 0
#define cpu_has_64bit_zero_reg 0
#define cpu_has_64bit_gp_regs 0
-#define cpu_has_64bit_addresses 0
#define cpu_dcache_line_size() 32
#define cpu_icache_line_size() 32
diff --git a/arch/mips/include/asm/mach-ralink/mt7621.h b/arch/mips/include/asm/mach-ralink/mt7621.h
index 65483a4681ab..e1af1ba50bd8 100644
--- a/arch/mips/include/asm/mach-ralink/mt7621.h
+++ b/arch/mips/include/asm/mach-ralink/mt7621.h
@@ -31,6 +31,4 @@
#define MT7621_CHIP_NAME0 0x3637544D
#define MT7621_CHIP_NAME1 0x20203132
-#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8)
-
#endif
diff --git a/arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h
index e06f517b2588..168359a0a58d 100644
--- a/arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h
@@ -46,7 +46,6 @@
#define cpu_has_64bits 0
#define cpu_has_64bit_zero_reg 0
#define cpu_has_64bit_gp_regs 0
-#define cpu_has_64bit_addresses 0
#define cpu_dcache_line_size() 32
#define cpu_icache_line_size() 32
diff --git a/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h
index 9c069646d0bd..fdaf8c9182bc 100644
--- a/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h
@@ -44,7 +44,6 @@
#define cpu_has_64bits 0
#define cpu_has_64bit_zero_reg 0
#define cpu_has_64bit_gp_regs 0
-#define cpu_has_64bit_addresses 0
#define cpu_dcache_line_size() 16
#define cpu_icache_line_size() 16
diff --git a/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h
index 2e423fd15384..7a385fe784a6 100644
--- a/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h
@@ -44,7 +44,6 @@
#define cpu_has_64bits 0
#define cpu_has_64bit_zero_reg 0
#define cpu_has_64bit_gp_regs 0
-#define cpu_has_64bit_addresses 0
#define cpu_dcache_line_size() 32
#define cpu_icache_line_size() 32
diff --git a/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h
index 7cee0e232580..0a61910f6521 100644
--- a/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h
@@ -43,7 +43,6 @@
#define cpu_has_64bits 0
#define cpu_has_64bit_zero_reg 0
#define cpu_has_64bit_gp_regs 0
-#define cpu_has_64bit_addresses 0
#define cpu_dcache_line_size() 32
#define cpu_icache_line_size() 32
diff --git a/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h b/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h
index bc46179fdf40..8539ccfb69b7 100644
--- a/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-rc32434/cpu-feature-overrides.h
@@ -54,7 +54,6 @@
#define cpu_has_64bits 0
#define cpu_has_64bit_zero_reg 0
#define cpu_has_64bit_gp_regs 0
-#define cpu_has_64bit_addresses 0
#define cpu_has_inclusive_pcaches 0
diff --git a/arch/mips/include/asm/mach-rc32434/pci.h b/arch/mips/include/asm/mach-rc32434/pci.h
index 6f40d1515580..9a6eefd12757 100644
--- a/arch/mips/include/asm/mach-rc32434/pci.h
+++ b/arch/mips/include/asm/mach-rc32434/pci.h
@@ -319,9 +319,6 @@ struct pci_msu {
#define PCIM_H_EA 0x3
#define PCIM_H_IA_FIX 0x4
#define PCIM_H_IA_RR 0x5
-#if 0
-#define PCI_ADDR_START 0x13000000
-#endif
#define PCI_ADDR_START 0x50000000
diff --git a/arch/mips/include/asm/mach-tx39xx/ioremap.h b/arch/mips/include/asm/mach-tx39xx/ioremap.h
index 077b3c9971f7..157a7292397e 100644
--- a/arch/mips/include/asm/mach-tx39xx/ioremap.h
+++ b/arch/mips/include/asm/mach-tx39xx/ioremap.h
@@ -7,15 +7,6 @@
#include <linux/types.h>
-/*
- * Allow physical addresses to be fixed up to help peripherals located
- * outside the low 32-bit range -- generic pass-through version.
- */
-static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
-{
- return phys_addr;
-}
-
static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size,
unsigned long flags)
{
diff --git a/arch/mips/include/asm/mach-tx49xx/ioremap.h b/arch/mips/include/asm/mach-tx49xx/ioremap.h
index c6b9e05f44c4..b1f3710acf8e 100644
--- a/arch/mips/include/asm/mach-tx49xx/ioremap.h
+++ b/arch/mips/include/asm/mach-tx49xx/ioremap.h
@@ -7,15 +7,6 @@
#include <linux/types.h>
-/*
- * Allow physical addresses to be fixed up to help peripherals located
- * outside the low 32-bit range -- generic pass-through version.
- */
-static inline phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
-{
- return phys_addr;
-}
-
static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size,
unsigned long flags)
{
diff --git a/arch/mips/include/asm/mach-xilfpga/irq.h b/arch/mips/include/asm/mach-xilfpga/irq.h
deleted file mode 100644
index 15ad29ec1dee..000000000000
--- a/arch/mips/include/asm/mach-xilfpga/irq.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2015 Imagination Technologies
- * Author: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
- */
-
-#ifndef __MIPS_ASM_MACH_XILFPGA_IRQ_H__
-#define __MIPS_ASM_MACH_XILFPGA_IRQ_H__
-
-#define NR_IRQS 32
-
-#include <asm/mach-generic/irq.h>
-
-#endif /* __MIPS_ASM_MACH_XILFPGA_IRQ_H__ */
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 796fe47cfd17..796dbb86575b 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -468,6 +468,7 @@
#define EXCCODE_THREAD 25 /* Thread exceptions (MT) */
#define EXCCODE_DSPDIS 26 /* DSP disabled exception */
#define EXCCODE_GE 27 /* Virtualized guest exception (VZ) */
+#define EXCCODE_CACHEERR 30 /* Parity/ECC occured on a core */
/* Implementation specific trap codes used by MIPS cores */
#define MIPS_EXCCODE_TLBPAR 16 /* TLB parity error exception */
@@ -563,6 +564,17 @@
#define MIPS_CONF_MT_FTLB (_ULCAST_(4) << 7)
#define MIPS_CONF_AR (_ULCAST_(7) << 10)
#define MIPS_CONF_AT (_ULCAST_(3) << 13)
+#define MIPS_CONF_BE (_ULCAST_(1) << 15)
+#define MIPS_CONF_BM (_ULCAST_(1) << 16)
+#define MIPS_CONF_MM (_ULCAST_(3) << 17)
+#define MIPS_CONF_MM_SYSAD (_ULCAST_(1) << 17)
+#define MIPS_CONF_MM_FULL (_ULCAST_(2) << 17)
+#define MIPS_CONF_SB (_ULCAST_(1) << 21)
+#define MIPS_CONF_UDI (_ULCAST_(1) << 22)
+#define MIPS_CONF_DSP (_ULCAST_(1) << 23)
+#define MIPS_CONF_ISP (_ULCAST_(1) << 24)
+#define MIPS_CONF_KU (_ULCAST_(3) << 25)
+#define MIPS_CONF_K23 (_ULCAST_(3) << 28)
#define MIPS_CONF_M (_ULCAST_(1) << 31)
/*
@@ -674,13 +686,38 @@
#define MIPS_CONF5_CV (_ULCAST_(1) << 29)
#define MIPS_CONF5_K (_ULCAST_(1) << 30)
-#define MIPS_CONF6_SYND (_ULCAST_(1) << 13)
+/* Config6 feature bits for proAptiv/P5600 */
+
+/* Jump register cache prediction disable */
+#define MIPS_CONF6_MTI_JRCD (_ULCAST_(1) << 0)
+/* MIPSr6 extensions enable */
+#define MIPS_CONF6_MTI_R6 (_ULCAST_(1) << 2)
+/* IFU Performance Control */
+#define MIPS_CONF6_MTI_IFUPERFCTL (_ULCAST_(3) << 10)
+#define MIPS_CONF6_MTI_SYND (_ULCAST_(1) << 13)
+/* Sleep state performance counter disable */
+#define MIPS_CONF6_MTI_SPCD (_ULCAST_(1) << 14)
/* proAptiv FTLB on/off bit */
-#define MIPS_CONF6_FTLBEN (_ULCAST_(1) << 15)
-/* Loongson-3 FTLB on/off bit */
-#define MIPS_CONF6_FTLBDIS (_ULCAST_(1) << 22)
+#define MIPS_CONF6_MTI_FTLBEN (_ULCAST_(1) << 15)
+/* Disable load/store bonding */
+#define MIPS_CONF6_MTI_DLSB (_ULCAST_(1) << 21)
/* FTLB probability bits */
-#define MIPS_CONF6_FTLBP_SHIFT (16)
+#define MIPS_CONF6_MTI_FTLBP_SHIFT (16)
+
+/* Config6 feature bits for Loongson-3 */
+
+/* Loongson-3 internal timer bit */
+#define MIPS_CONF6_LOONGSON_INTIMER (_ULCAST_(1) << 6)
+/* Loongson-3 external timer bit */
+#define MIPS_CONF6_LOONGSON_EXTIMER (_ULCAST_(1) << 7)
+/* Loongson-3 SFB on/off bit, STFill in manual */
+#define MIPS_CONF6_LOONGSON_SFBEN (_ULCAST_(1) << 8)
+/* Loongson-3's LL on exclusive cacheline */
+#define MIPS_CONF6_LOONGSON_LLEXC (_ULCAST_(1) << 16)
+/* Loongson-3's SC has a random delay */
+#define MIPS_CONF6_LOONGSON_SCRAND (_ULCAST_(1) << 17)
+/* Loongson-3 FTLB on/off bit, VTLBOnly in manual */
+#define MIPS_CONF6_LOONGSON_FTLBDIS (_ULCAST_(1) << 22)
#define MIPS_CONF7_WII (_ULCAST_(1) << 31)
@@ -753,10 +790,18 @@
/* MAAR bit definitions */
#define MIPS_MAAR_VH (_U64CAST_(1) << 63)
-#define MIPS_MAAR_ADDR ((BIT_ULL(BITS_PER_LONG - 12) - 1) << 12)
+#define MIPS_MAAR_ADDR GENMASK_ULL(55, 12)
#define MIPS_MAAR_ADDR_SHIFT 12
#define MIPS_MAAR_S (_ULCAST_(1) << 1)
#define MIPS_MAAR_VL (_ULCAST_(1) << 0)
+#ifdef CONFIG_XPA
+#define MIPS_MAAR_V (MIPS_MAAR_VH | MIPS_MAAR_VL)
+#else
+#define MIPS_MAAR_V MIPS_MAAR_VL
+#endif
+#define MIPS_MAARX_VH (_ULCAST_(1) << 31)
+#define MIPS_MAARX_ADDR 0xF
+#define MIPS_MAARX_ADDR_SHIFT 32
/* MAARI bit definitions */
#define MIPS_MAARI_INDEX (_ULCAST_(0x3f) << 0)
@@ -997,6 +1042,8 @@
#define LOONGSON_DIAG_ITLB (_ULCAST_(1) << 2)
/* Flush DTLB */
#define LOONGSON_DIAG_DTLB (_ULCAST_(1) << 3)
+/* Allow some CACHE instructions (CACHE0, 1, 3, 21 and 23) in user mode */
+#define LOONGSON_DIAG_UCAC (_ULCAST_(1) << 8)
/* Flush VTLB */
#define LOONGSON_DIAG_VTLB (_ULCAST_(1) << 12)
/* Flush FTLB */
@@ -1717,6 +1764,8 @@ do { \
#define write_c0_lladdr(val) __write_ulong_c0_register($17, 0, val)
#define read_c0_maar() __read_ulong_c0_register($17, 1)
#define write_c0_maar(val) __write_ulong_c0_register($17, 1, val)
+#define readx_c0_maar() __readx_32bit_c0_register($17, 1)
+#define writex_c0_maar(val) __writex_32bit_c0_register($17, 1, val)
#define read_c0_maari() __read_32bit_c0_register($17, 2)
#define write_c0_maari(val) __write_32bit_c0_register($17, 2, val)
diff --git a/arch/mips/include/asm/nile4.h b/arch/mips/include/asm/nile4.h
deleted file mode 100644
index 9d36b7823603..000000000000
--- a/arch/mips/include/asm/nile4.h
+++ /dev/null
@@ -1,310 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * asm-mips/nile4.h -- NEC Vrc-5074 Nile 4 definitions
- *
- * Copyright (C) 2000 Geert Uytterhoeven <geert@linux-m68k.org>
- * Sony Software Development Center Europe (SDCE), Brussels
- *
- * This file is based on the following documentation:
- *
- * NEC Vrc 5074 System Controller Data Sheet, June 1998
- */
-
-#ifndef _ASM_NILE4_H
-#define _ASM_NILE4_H
-
-#define NILE4_BASE 0xbfa00000
-#define NILE4_SIZE 0x00200000 /* 2 MB */
-
-
- /*
- * Physical Device Address Registers (PDARs)
- */
-
-#define NILE4_SDRAM0 0x0000 /* SDRAM Bank 0 [R/W] */
-#define NILE4_SDRAM1 0x0008 /* SDRAM Bank 1 [R/W] */
-#define NILE4_DCS2 0x0010 /* Device Chip-Select 2 [R/W] */
-#define NILE4_DCS3 0x0018 /* Device Chip-Select 3 [R/W] */
-#define NILE4_DCS4 0x0020 /* Device Chip-Select 4 [R/W] */
-#define NILE4_DCS5 0x0028 /* Device Chip-Select 5 [R/W] */
-#define NILE4_DCS6 0x0030 /* Device Chip-Select 6 [R/W] */
-#define NILE4_DCS7 0x0038 /* Device Chip-Select 7 [R/W] */
-#define NILE4_DCS8 0x0040 /* Device Chip-Select 8 [R/W] */
-#define NILE4_PCIW0 0x0060 /* PCI Address Window 0 [R/W] */
-#define NILE4_PCIW1 0x0068 /* PCI Address Window 1 [R/W] */
-#define NILE4_INTCS 0x0070 /* Controller Internal Registers and Devices */
- /* [R/W] */
-#define NILE4_BOOTCS 0x0078 /* Boot ROM Chip-Select [R/W] */
-
-
- /*
- * CPU Interface Registers
- */
-
-#define NILE4_CPUSTAT 0x0080 /* CPU Status [R/W] */
-#define NILE4_INTCTRL 0x0088 /* Interrupt Control [R/W] */
-#define NILE4_INTSTAT0 0x0090 /* Interrupt Status 0 [R] */
-#define NILE4_INTSTAT1 0x0098 /* Interrupt Status 1 and CPU Interrupt */
- /* Enable [R/W] */
-#define NILE4_INTCLR 0x00A0 /* Interrupt Clear [R/W] */
-#define NILE4_INTPPES 0x00A8 /* PCI Interrupt Control [R/W] */
-
-
- /*
- * Memory-Interface Registers
- */
-
-#define NILE4_MEMCTRL 0x00C0 /* Memory Control */
-#define NILE4_ACSTIME 0x00C8 /* Memory Access Timing [R/W] */
-#define NILE4_CHKERR 0x00D0 /* Memory Check Error Status [R] */
-
-
- /*
- * PCI-Bus Registers
- */
-
-#define NILE4_PCICTRL 0x00E0 /* PCI Control [R/W] */
-#define NILE4_PCIARB 0x00E8 /* PCI Arbiter [R/W] */
-#define NILE4_PCIINIT0 0x00F0 /* PCI Master (Initiator) 0 [R/W] */
-#define NILE4_PCIINIT1 0x00F8 /* PCI Master (Initiator) 1 [R/W] */
-#define NILE4_PCIERR 0x00B8 /* PCI Error [R/W] */
-
-
- /*
- * Local-Bus Registers
- */
-
-#define NILE4_LCNFG 0x0100 /* Local Bus Configuration [R/W] */
-#define NILE4_LCST2 0x0110 /* Local Bus Chip-Select Timing 2 [R/W] */
-#define NILE4_LCST3 0x0118 /* Local Bus Chip-Select Timing 3 [R/W] */
-#define NILE4_LCST4 0x0120 /* Local Bus Chip-Select Timing 4 [R/W] */
-#define NILE4_LCST5 0x0128 /* Local Bus Chip-Select Timing 5 [R/W] */
-#define NILE4_LCST6 0x0130 /* Local Bus Chip-Select Timing 6 [R/W] */
-#define NILE4_LCST7 0x0138 /* Local Bus Chip-Select Timing 7 [R/W] */
-#define NILE4_LCST8 0x0140 /* Local Bus Chip-Select Timing 8 [R/W] */
-#define NILE4_DCSFN 0x0150 /* Device Chip-Select Muxing and Output */
- /* Enables [R/W] */
-#define NILE4_DCSIO 0x0158 /* Device Chip-Selects As I/O Bits [R/W] */
-#define NILE4_BCST 0x0178 /* Local Boot Chip-Select Timing [R/W] */
-
-
- /*
- * DMA Registers
- */
-
-#define NILE4_DMACTRL0 0x0180 /* DMA Control 0 [R/W] */
-#define NILE4_DMASRCA0 0x0188 /* DMA Source Address 0 [R/W] */
-#define NILE4_DMADESA0 0x0190 /* DMA Destination Address 0 [R/W] */
-#define NILE4_DMACTRL1 0x0198 /* DMA Control 1 [R/W] */
-#define NILE4_DMASRCA1 0x01A0 /* DMA Source Address 1 [R/W] */
-#define NILE4_DMADESA1 0x01A8 /* DMA Destination Address 1 [R/W] */
-
-
- /*
- * Timer Registers
- */
-
-#define NILE4_T0CTRL 0x01C0 /* SDRAM Refresh Control [R/W] */
-#define NILE4_T0CNTR 0x01C8 /* SDRAM Refresh Counter [R/W] */
-#define NILE4_T1CTRL 0x01D0 /* CPU-Bus Read Time-Out Control [R/W] */
-#define NILE4_T1CNTR 0x01D8 /* CPU-Bus Read Time-Out Counter [R/W] */
-#define NILE4_T2CTRL 0x01E0 /* General-Purpose Timer Control [R/W] */
-#define NILE4_T2CNTR 0x01E8 /* General-Purpose Timer Counter [R/W] */
-#define NILE4_T3CTRL 0x01F0 /* Watchdog Timer Control [R/W] */
-#define NILE4_T3CNTR 0x01F8 /* Watchdog Timer Counter [R/W] */
-
-
- /*
- * PCI Configuration Space Registers
- */
-
-#define NILE4_PCI_BASE 0x0200
-
-#define NILE4_VID 0x0200 /* PCI Vendor ID [R] */
-#define NILE4_DID 0x0202 /* PCI Device ID [R] */
-#define NILE4_PCICMD 0x0204 /* PCI Command [R/W] */
-#define NILE4_PCISTS 0x0206 /* PCI Status [R/W] */
-#define NILE4_REVID 0x0208 /* PCI Revision ID [R] */
-#define NILE4_CLASS 0x0209 /* PCI Class Code [R] */
-#define NILE4_CLSIZ 0x020C /* PCI Cache Line Size [R/W] */
-#define NILE4_MLTIM 0x020D /* PCI Latency Timer [R/W] */
-#define NILE4_HTYPE 0x020E /* PCI Header Type [R] */
-#define NILE4_BIST 0x020F /* BIST [R] (unimplemented) */
-#define NILE4_BARC 0x0210 /* PCI Base Address Register Control [R/W] */
-#define NILE4_BAR0 0x0218 /* PCI Base Address Register 0 [R/W] */
-#define NILE4_BAR1 0x0220 /* PCI Base Address Register 1 [R/W] */
-#define NILE4_CIS 0x0228 /* PCI Cardbus CIS Pointer [R] */
- /* (unimplemented) */
-#define NILE4_SSVID 0x022C /* PCI Sub-System Vendor ID [R/W] */
-#define NILE4_SSID 0x022E /* PCI Sub-System ID [R/W] */
-#define NILE4_ROM 0x0230 /* Expansion ROM Base Address [R] */
- /* (unimplemented) */
-#define NILE4_INTLIN 0x023C /* PCI Interrupt Line [R/W] */
-#define NILE4_INTPIN 0x023D /* PCI Interrupt Pin [R] */
-#define NILE4_MINGNT 0x023E /* PCI Min_Gnt [R] (unimplemented) */
-#define NILE4_MAXLAT 0x023F /* PCI Max_Lat [R] (unimplemented) */
-#define NILE4_BAR2 0x0240 /* PCI Base Address Register 2 [R/W] */
-#define NILE4_BAR3 0x0248 /* PCI Base Address Register 3 [R/W] */
-#define NILE4_BAR4 0x0250 /* PCI Base Address Register 4 [R/W] */
-#define NILE4_BAR5 0x0258 /* PCI Base Address Register 5 [R/W] */
-#define NILE4_BAR6 0x0260 /* PCI Base Address Register 6 [R/W] */
-#define NILE4_BAR7 0x0268 /* PCI Base Address Register 7 [R/W] */
-#define NILE4_BAR8 0x0270 /* PCI Base Address Register 8 [R/W] */
-#define NILE4_BARB 0x0278 /* PCI Base Address Register BOOT [R/W] */
-
-
- /*
- * Serial-Port Registers
- */
-
-#define NILE4_UART_BASE 0x0300
-
-#define NILE4_UARTRBR 0x0300 /* UART Receiver Data Buffer [R] */
-#define NILE4_UARTTHR 0x0300 /* UART Transmitter Data Holding [W] */
-#define NILE4_UARTIER 0x0308 /* UART Interrupt Enable [R/W] */
-#define NILE4_UARTDLL 0x0300 /* UART Divisor Latch LSB [R/W] */
-#define NILE4_UARTDLM 0x0308 /* UART Divisor Latch MSB [R/W] */
-#define NILE4_UARTIIR 0x0310 /* UART Interrupt ID [R] */
-#define NILE4_UARTFCR 0x0310 /* UART FIFO Control [W] */
-#define NILE4_UARTLCR 0x0318 /* UART Line Control [R/W] */
-#define NILE4_UARTMCR 0x0320 /* UART Modem Control [R/W] */
-#define NILE4_UARTLSR 0x0328 /* UART Line Status [R/W] */
-#define NILE4_UARTMSR 0x0330 /* UART Modem Status [R/W] */
-#define NILE4_UARTSCR 0x0338 /* UART Scratch [R/W] */
-
-#define NILE4_UART_BASE_BAUD 520833 /* 100 MHz / 12 / 16 */
-
-
- /*
- * Interrupt Lines
- */
-
-#define NILE4_INT_CPCE 0 /* CPU-Interface Parity-Error Interrupt */
-#define NILE4_INT_CNTD 1 /* CPU No-Target Decode Interrupt */
-#define NILE4_INT_MCE 2 /* Memory-Check Error Interrupt */
-#define NILE4_INT_DMA 3 /* DMA Controller Interrupt */
-#define NILE4_INT_UART 4 /* UART Interrupt */
-#define NILE4_INT_WDOG 5 /* Watchdog Timer Interrupt */
-#define NILE4_INT_GPT 6 /* General-Purpose Timer Interrupt */
-#define NILE4_INT_LBRTD 7 /* Local-Bus Ready Timer Interrupt */
-#define NILE4_INT_INTA 8 /* PCI Interrupt Signal INTA# */
-#define NILE4_INT_INTB 9 /* PCI Interrupt Signal INTB# */
-#define NILE4_INT_INTC 10 /* PCI Interrupt Signal INTC# */
-#define NILE4_INT_INTD 11 /* PCI Interrupt Signal INTD# */
-#define NILE4_INT_INTE 12 /* PCI Interrupt Signal INTE# (ISA cascade) */
-#define NILE4_INT_RESV 13 /* Reserved */
-#define NILE4_INT_PCIS 14 /* PCI SERR# Interrupt */
-#define NILE4_INT_PCIE 15 /* PCI Internal Error Interrupt */
-
-
- /*
- * Nile 4 Register Access
- */
-
-static inline void nile4_sync(void)
-{
- volatile u32 *p = (volatile u32 *)0xbfc00000;
- (void)(*p);
-}
-
-static inline void nile4_out32(u32 offset, u32 val)
-{
- *(volatile u32 *)(NILE4_BASE+offset) = val;
- nile4_sync();
-}
-
-static inline u32 nile4_in32(u32 offset)
-{
- u32 val = *(volatile u32 *)(NILE4_BASE+offset);
- nile4_sync();
- return val;
-}
-
-static inline void nile4_out16(u32 offset, u16 val)
-{
- *(volatile u16 *)(NILE4_BASE+offset) = val;
- nile4_sync();
-}
-
-static inline u16 nile4_in16(u32 offset)
-{
- u16 val = *(volatile u16 *)(NILE4_BASE+offset);
- nile4_sync();
- return val;
-}
-
-static inline void nile4_out8(u32 offset, u8 val)
-{
- *(volatile u8 *)(NILE4_BASE+offset) = val;
- nile4_sync();
-}
-
-static inline u8 nile4_in8(u32 offset)
-{
- u8 val = *(volatile u8 *)(NILE4_BASE+offset);
- nile4_sync();
- return val;
-}
-
-
- /*
- * Physical Device Address Registers
- */
-
-extern void nile4_set_pdar(u32 pdar, u32 phys, u32 size, int width,
- int on_memory_bus, int visible);
-
-
- /*
- * PCI Master Registers
- */
-
-#define NILE4_PCICMD_IACK 0 /* PCI Interrupt Acknowledge */
-#define NILE4_PCICMD_IO 1 /* PCI I/O Space */
-#define NILE4_PCICMD_MEM 3 /* PCI Memory Space */
-#define NILE4_PCICMD_CFG 5 /* PCI Configuration Space */
-
-
- /*
- * PCI Address Spaces
- *
- * Note that these are multiplexed using PCIINIT[01]!
- */
-
-#define NILE4_PCI_IO_BASE 0xa6000000
-#define NILE4_PCI_MEM_BASE 0xa8000000
-#define NILE4_PCI_CFG_BASE NILE4_PCI_MEM_BASE
-#define NILE4_PCI_IACK_BASE NILE4_PCI_IO_BASE
-
-
-extern void nile4_set_pmr(u32 pmr, u32 type, u32 addr);
-
-
- /*
- * Interrupt Programming
- */
-
-#define NUM_I8259_INTERRUPTS 16
-#define NUM_NILE4_INTERRUPTS 16
-
-#define IRQ_I8259_CASCADE NILE4_INT_INTE
-#define is_i8259_irq(irq) ((irq) < NUM_I8259_INTERRUPTS)
-#define nile4_to_irq(n) ((n)+NUM_I8259_INTERRUPTS)
-#define irq_to_nile4(n) ((n)-NUM_I8259_INTERRUPTS)
-
-extern void nile4_map_irq(int nile4_irq, int cpu_irq);
-extern void nile4_map_irq_all(int cpu_irq);
-extern void nile4_enable_irq(unsigned int nile4_irq);
-extern void nile4_disable_irq(unsigned int nile4_irq);
-extern void nile4_disable_irq_all(void);
-extern u16 nile4_get_irq_stat(int cpu_irq);
-extern void nile4_enable_irq_output(int cpu_irq);
-extern void nile4_disable_irq_output(int cpu_irq);
-extern void nile4_set_pci_irq_polarity(int pci_irq, int high);
-extern void nile4_set_pci_irq_level_or_edge(int pci_irq, int level);
-extern void nile4_clear_irq(int nile4_irq);
-extern void nile4_clear_irq_mask(u32 mask);
-extern u8 nile4_i8259_iack(void);
-extern void nile4_dump_irq_status(void); /* Debug */
-
-#endif
diff --git a/arch/mips/include/asm/octeon/cvmx-sli-defs.h b/arch/mips/include/asm/octeon/cvmx-sli-defs.h
index cbc7cdae1c6a..5ef6c38150f5 100644
--- a/arch/mips/include/asm/octeon/cvmx-sli-defs.h
+++ b/arch/mips/include/asm/octeon/cvmx-sli-defs.h
@@ -46,7 +46,7 @@ static inline uint64_t CVMX_SLI_PCIE_MSI_RCV_FUNC(void)
case OCTEON_CN78XX & OCTEON_FAMILY_MASK:
if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X))
return 0x0000000000003CB0ull;
- /* Else, fall through */
+ fallthrough;
default:
return 0x0000000000023CB0ull;
}
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index e2f503fc7a84..6a77bc4a6eec 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -49,7 +49,7 @@ static inline unsigned int page_size_ftlb(unsigned int mmuextdef)
return 6;
if (PAGE_SIZE > (256 << 10))
return 7; /* reserved */
- /* fall through */
+ fallthrough;
case MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT:
return (PAGE_SHIFT - 10) / 2;
default:
diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h
index f92716cfa4f4..ee5dc0c145b9 100644
--- a/arch/mips/include/asm/pgtable-64.h
+++ b/arch/mips/include/asm/pgtable-64.h
@@ -172,6 +172,8 @@
extern pte_t invalid_pte_table[PTRS_PER_PTE];
+#define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))
+
#ifndef __PAGETABLE_PUD_FOLDED
/*
* For 4-level pagetables we defines these ourselves, for 3-level the
@@ -210,8 +212,6 @@ static inline void p4d_clear(p4d_t *p4dp)
p4d_val(*p4dp) = (unsigned long)invalid_pud_table;
}
-#define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))
-
static inline unsigned long p4d_page_vaddr(p4d_t p4d)
{
return p4d_val(p4d);
diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h
index 4da79b85c179..e26dc41a8a68 100644
--- a/arch/mips/include/asm/pgtable-bits.h
+++ b/arch/mips/include/asm/pgtable-bits.h
@@ -55,6 +55,9 @@ enum pgtable_bits {
#if defined(CONFIG_ARCH_HAS_PTE_SPECIAL)
_PAGE_SPECIAL_SHIFT,
#endif
+#if defined(CONFIG_HAVE_ARCH_SOFT_DIRTY)
+ _PAGE_SOFT_DIRTY_SHIFT,
+#endif
};
/*
@@ -84,6 +87,9 @@ enum pgtable_bits {
#if defined(CONFIG_ARCH_HAS_PTE_SPECIAL)
_PAGE_SPECIAL_SHIFT,
#endif
+#if defined(CONFIG_HAVE_ARCH_SOFT_DIRTY)
+ _PAGE_SOFT_DIRTY_SHIFT,
+#endif
};
#elif defined(CONFIG_CPU_R3K_TLB)
@@ -99,6 +105,9 @@ enum pgtable_bits {
#if defined(CONFIG_ARCH_HAS_PTE_SPECIAL)
_PAGE_SPECIAL_SHIFT,
#endif
+#if defined(CONFIG_HAVE_ARCH_SOFT_DIRTY)
+ _PAGE_SOFT_DIRTY_SHIFT,
+#endif
/* Used by TLB hardware (placed in EntryLo) */
_PAGE_GLOBAL_SHIFT = 8,
@@ -125,7 +134,9 @@ enum pgtable_bits {
#if defined(CONFIG_ARCH_HAS_PTE_SPECIAL)
_PAGE_SPECIAL_SHIFT,
#endif
-
+#if defined(CONFIG_HAVE_ARCH_SOFT_DIRTY)
+ _PAGE_SOFT_DIRTY_SHIFT,
+#endif
/* Used by TLB hardware (placed in EntryLo*) */
#if defined(CONFIG_CPU_HAS_RIXI)
_PAGE_NO_EXEC_SHIFT,
@@ -152,6 +163,11 @@ enum pgtable_bits {
#else
# define _PAGE_SPECIAL 0
#endif
+#if defined(CONFIG_HAVE_ARCH_SOFT_DIRTY)
+# define _PAGE_SOFT_DIRTY (1 << _PAGE_SOFT_DIRTY_SHIFT)
+#else
+# define _PAGE_SOFT_DIRTY 0
+#endif
/* Used by TLB hardware (placed in EntryLo*) */
#if defined(CONFIG_XPA)
@@ -269,6 +285,6 @@ static inline uint64_t pte_to_entrylo(unsigned long pte_val)
#define __WRITEABLE (_PAGE_SILENT_WRITE | _PAGE_WRITE | _PAGE_MODIFIED)
#define _PAGE_CHG_MASK (_PAGE_ACCESSED | _PAGE_MODIFIED | \
- _PFN_MASK | _CACHE_MASK)
+ _PAGE_SOFT_DIRTY | _PFN_MASK | _CACHE_MASK)
#endif /* _ASM_PGTABLE_BITS_H */
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index f1801e7a4b15..85b39c9fd09e 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -400,7 +400,7 @@ static inline pte_t pte_mkwrite(pte_t pte)
static inline pte_t pte_mkdirty(pte_t pte)
{
- pte_val(pte) |= _PAGE_MODIFIED;
+ pte_val(pte) |= _PAGE_MODIFIED | _PAGE_SOFT_DIRTY;
if (pte_val(pte) & _PAGE_WRITE)
pte_val(pte) |= _PAGE_SILENT_WRITE;
return pte;
@@ -414,6 +414,8 @@ static inline pte_t pte_mkyoung(pte_t pte)
return pte;
}
+#define pte_sw_mkyoung pte_mkyoung
+
#ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
static inline int pte_huge(pte_t pte) { return pte_val(pte) & _PAGE_HUGE; }
@@ -423,6 +425,30 @@ static inline pte_t pte_mkhuge(pte_t pte)
return pte;
}
#endif /* CONFIG_MIPS_HUGE_TLB_SUPPORT */
+
+#ifdef CONFIG_HAVE_ARCH_SOFT_DIRTY
+static inline bool pte_soft_dirty(pte_t pte)
+{
+ return pte_val(pte) & _PAGE_SOFT_DIRTY;
+}
+#define pte_swp_soft_dirty pte_soft_dirty
+
+static inline pte_t pte_mksoft_dirty(pte_t pte)
+{
+ pte_val(pte) |= _PAGE_SOFT_DIRTY;
+ return pte;
+}
+#define pte_swp_mksoft_dirty pte_mksoft_dirty
+
+static inline pte_t pte_clear_soft_dirty(pte_t pte)
+{
+ pte_val(pte) &= ~(_PAGE_SOFT_DIRTY);
+ return pte;
+}
+#define pte_swp_clear_soft_dirty pte_clear_soft_dirty
+
+#endif /* CONFIG_HAVE_ARCH_SOFT_DIRTY */
+
#endif
/*
@@ -454,6 +480,31 @@ static inline pgprot_t pgprot_writecombine(pgprot_t _prot)
return __pgprot(prot);
}
+static inline void flush_tlb_fix_spurious_fault(struct vm_area_struct *vma,
+ unsigned long address)
+{
+}
+
+#define __HAVE_ARCH_PTE_SAME
+static inline int pte_same(pte_t pte_a, pte_t pte_b)
+{
+ return pte_val(pte_a) == pte_val(pte_b);
+}
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+static inline int ptep_set_access_flags(struct vm_area_struct *vma,
+ unsigned long address, pte_t *ptep,
+ pte_t entry, int dirty)
+{
+ if (!pte_same(*ptep, entry))
+ set_pte_at(vma->vm_mm, address, ptep, entry);
+ /*
+ * update_mmu_cache will unconditionally execute, handling both
+ * the case that the PTE changed and the spurious fault case.
+ */
+ return true;
+}
+
/*
* Conversion functions: convert a page and protection to a page entry,
* and a page entry and page directory to the page they refer to.
@@ -481,8 +532,11 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
#else
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
- return __pte((pte_val(pte) & _PAGE_CHG_MASK) |
- (pgprot_val(newprot) & ~_PAGE_CHG_MASK));
+ pte_val(pte) &= _PAGE_CHG_MASK;
+ pte_val(pte) |= pgprot_val(newprot) & ~_PAGE_CHG_MASK;
+ if ((pte_val(pte) & _PAGE_ACCESSED) && !(pte_val(pte) & _PAGE_NO_READ))
+ pte_val(pte) |= _PAGE_SILENT_READ;
+ return pte;
}
#endif
@@ -497,6 +551,9 @@ static inline void update_mmu_cache(struct vm_area_struct *vma,
__update_tlb(vma, address, pte);
}
+#define __HAVE_ARCH_UPDATE_MMU_TLB
+#define update_mmu_tlb update_mmu_cache
+
static inline void update_mmu_cache_pmd(struct vm_area_struct *vma,
unsigned long address, pmd_t *pmdp)
{
@@ -507,20 +564,17 @@ static inline void update_mmu_cache_pmd(struct vm_area_struct *vma,
#define kern_addr_valid(addr) (1)
-#ifdef CONFIG_PHYS_ADDR_T_64BIT
-extern int remap_pfn_range(struct vm_area_struct *vma, unsigned long from, unsigned long pfn, unsigned long size, pgprot_t prot);
-
-static inline int io_remap_pfn_range(struct vm_area_struct *vma,
- unsigned long vaddr,
- unsigned long pfn,
- unsigned long size,
- pgprot_t prot)
-{
- phys_addr_t phys_addr_high = fixup_bigphys_addr(pfn << PAGE_SHIFT, size);
- return remap_pfn_range(vma, vaddr, phys_addr_high >> PAGE_SHIFT, size, prot);
-}
+/*
+ * Allow physical addresses to be fixed up to help 36-bit peripherals.
+ */
+#ifdef CONFIG_MIPS_FIXUP_BIGPHYS_ADDR
+phys_addr_t fixup_bigphys_addr(phys_addr_t addr, phys_addr_t size);
+int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long vaddr,
+ unsigned long pfn, unsigned long size, pgprot_t prot);
#define io_remap_pfn_range io_remap_pfn_range
-#endif
+#else
+#define fixup_bigphys_addr(addr, size) (addr)
+#endif /* CONFIG_MIPS_FIXUP_BIGPHYS_ADDR */
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
@@ -579,7 +633,7 @@ static inline pmd_t pmd_mkclean(pmd_t pmd)
static inline pmd_t pmd_mkdirty(pmd_t pmd)
{
- pmd_val(pmd) |= _PAGE_MODIFIED;
+ pmd_val(pmd) |= _PAGE_MODIFIED | _PAGE_SOFT_DIRTY;
if (pmd_val(pmd) & _PAGE_WRITE)
pmd_val(pmd) |= _PAGE_SILENT_WRITE;
@@ -608,6 +662,26 @@ static inline pmd_t pmd_mkyoung(pmd_t pmd)
return pmd;
}
+#ifdef CONFIG_HAVE_ARCH_SOFT_DIRTY
+static inline int pmd_soft_dirty(pmd_t pmd)
+{
+ return !!(pmd_val(pmd) & _PAGE_SOFT_DIRTY);
+}
+
+static inline pmd_t pmd_mksoft_dirty(pmd_t pmd)
+{
+ pmd_val(pmd) |= _PAGE_SOFT_DIRTY;
+ return pmd;
+}
+
+static inline pmd_t pmd_clear_soft_dirty(pmd_t pmd)
+{
+ pmd_val(pmd) &= ~(_PAGE_SOFT_DIRTY);
+ return pmd;
+}
+
+#endif /* CONFIG_HAVE_ARCH_SOFT_DIRTY */
+
/* Extern to avoid header file madness */
extern pmd_t mk_pmd(struct page *page, pgprot_t prot);
diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h
index 7990c1c70471..5d9ff61004ca 100644
--- a/arch/mips/include/asm/smp.h
+++ b/arch/mips/include/asm/smp.h
@@ -125,7 +125,7 @@ static inline void arch_send_call_function_single_ipi(int cpu)
{
extern const struct plat_smp_ops *mp_ops; /* private */
- mp_ops->send_ipi_mask(cpumask_of(cpu), SMP_CALL_FUNCTION);
+ mp_ops->send_ipi_single(cpu, SMP_CALL_FUNCTION);
}
static inline void arch_send_call_function_ipi_mask(const struct cpumask *mask)
diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h
index 4d6ad907ae54..3e8d2aaf96af 100644
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -424,7 +424,7 @@
.macro RESTORE_SP_AND_RET docfi=0
RESTORE_SP \docfi
-#ifdef CONFIG_CPU_MIPSR6
+#if defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6)
eretnc
#else
.set push
diff --git a/arch/mips/include/asm/switch_to.h b/arch/mips/include/asm/switch_to.h
index 09cbe9042828..0b0a93bf83cd 100644
--- a/arch/mips/include/asm/switch_to.h
+++ b/arch/mips/include/asm/switch_to.h
@@ -67,11 +67,11 @@ do { \
#endif
/*
- * Clear LLBit during context switches on MIPSr6 such that eretnc can be used
+ * Clear LLBit during context switches on MIPSr5+ such that eretnc can be used
* unconditionally when returning to userland in entry.S.
*/
-#define __clear_r6_hw_ll_bit() do { \
- if (cpu_has_mips_r6) \
+#define __clear_r5_hw_ll_bit() do { \
+ if (cpu_has_mips_r5 || cpu_has_mips_r6) \
write_c0_lladdr(0); \
} while (0)
@@ -129,7 +129,7 @@ do { \
} \
clear_c0_status(ST0_CU2); \
} \
- __clear_r6_hw_ll_bit(); \
+ __clear_r5_hw_ll_bit(); \
__clear_software_ll_bit(); \
if (cpu_has_userlocal) \
write_c0_userlocal(task_thread_info(next)->tp_value); \
diff --git a/arch/mips/include/asm/unaligned-emul.h b/arch/mips/include/asm/unaligned-emul.h
new file mode 100644
index 000000000000..2022b18944b9
--- /dev/null
+++ b/arch/mips/include/asm/unaligned-emul.h
@@ -0,0 +1,779 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef _ASM_MIPS_UNALIGNED_EMUL_H
+#define _ASM_MIPS_UNALIGNED_EMUL_H
+
+#include <asm/asm.h>
+
+#ifdef __BIG_ENDIAN
+#define _LoadHW(addr, value, res, type) \
+do { \
+ __asm__ __volatile__ (".set\tnoat\n" \
+ "1:\t"type##_lb("%0", "0(%2)")"\n" \
+ "2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
+ "sll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "li\t%1, 0\n" \
+ "3:\t.set\tat\n\t" \
+ ".insn\n\t" \
+ ".section\t.fixup,\"ax\"\n\t" \
+ "4:\tli\t%1, %3\n\t" \
+ "j\t3b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 4b\n\t" \
+ STR(PTR)"\t2b, 4b\n\t" \
+ ".previous" \
+ : "=&r" (value), "=r" (res) \
+ : "r" (addr), "i" (-EFAULT)); \
+} while (0)
+
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
+#define _LoadW(addr, value, res, type) \
+do { \
+ __asm__ __volatile__ ( \
+ "1:\t"type##_lwl("%0", "(%2)")"\n" \
+ "2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
+ "li\t%1, 0\n" \
+ "3:\n\t" \
+ ".insn\n\t" \
+ ".section\t.fixup,\"ax\"\n\t" \
+ "4:\tli\t%1, %3\n\t" \
+ "j\t3b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 4b\n\t" \
+ STR(PTR)"\t2b, 4b\n\t" \
+ ".previous" \
+ : "=&r" (value), "=r" (res) \
+ : "r" (addr), "i" (-EFAULT)); \
+} while (0)
+
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
+/* For CPUs without lwl instruction */
+#define _LoadW(addr, value, res, type) \
+do { \
+ __asm__ __volatile__ ( \
+ ".set\tpush\n" \
+ ".set\tnoat\n\t" \
+ "1:"type##_lb("%0", "0(%2)")"\n\t" \
+ "2:"type##_lbu("$1", "1(%2)")"\n\t" \
+ "sll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "3:"type##_lbu("$1", "2(%2)")"\n\t" \
+ "sll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "4:"type##_lbu("$1", "3(%2)")"\n\t" \
+ "sll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "li\t%1, 0\n" \
+ ".set\tpop\n" \
+ "10:\n\t" \
+ ".insn\n\t" \
+ ".section\t.fixup,\"ax\"\n\t" \
+ "11:\tli\t%1, %3\n\t" \
+ "j\t10b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 11b\n\t" \
+ STR(PTR)"\t2b, 11b\n\t" \
+ STR(PTR)"\t3b, 11b\n\t" \
+ STR(PTR)"\t4b, 11b\n\t" \
+ ".previous" \
+ : "=&r" (value), "=r" (res) \
+ : "r" (addr), "i" (-EFAULT)); \
+} while (0)
+
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
+
+#define _LoadHWU(addr, value, res, type) \
+do { \
+ __asm__ __volatile__ ( \
+ ".set\tnoat\n" \
+ "1:\t"type##_lbu("%0", "0(%2)")"\n" \
+ "2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
+ "sll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "li\t%1, 0\n" \
+ "3:\n\t" \
+ ".insn\n\t" \
+ ".set\tat\n\t" \
+ ".section\t.fixup,\"ax\"\n\t" \
+ "4:\tli\t%1, %3\n\t" \
+ "j\t3b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 4b\n\t" \
+ STR(PTR)"\t2b, 4b\n\t" \
+ ".previous" \
+ : "=&r" (value), "=r" (res) \
+ : "r" (addr), "i" (-EFAULT)); \
+} while (0)
+
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
+#define _LoadWU(addr, value, res, type) \
+do { \
+ __asm__ __volatile__ ( \
+ "1:\t"type##_lwl("%0", "(%2)")"\n" \
+ "2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
+ "dsll\t%0, %0, 32\n\t" \
+ "dsrl\t%0, %0, 32\n\t" \
+ "li\t%1, 0\n" \
+ "3:\n\t" \
+ ".insn\n\t" \
+ "\t.section\t.fixup,\"ax\"\n\t" \
+ "4:\tli\t%1, %3\n\t" \
+ "j\t3b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 4b\n\t" \
+ STR(PTR)"\t2b, 4b\n\t" \
+ ".previous" \
+ : "=&r" (value), "=r" (res) \
+ : "r" (addr), "i" (-EFAULT)); \
+} while (0)
+
+#define _LoadDW(addr, value, res) \
+do { \
+ __asm__ __volatile__ ( \
+ "1:\tldl\t%0, (%2)\n" \
+ "2:\tldr\t%0, 7(%2)\n\t" \
+ "li\t%1, 0\n" \
+ "3:\n\t" \
+ ".insn\n\t" \
+ "\t.section\t.fixup,\"ax\"\n\t" \
+ "4:\tli\t%1, %3\n\t" \
+ "j\t3b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 4b\n\t" \
+ STR(PTR)"\t2b, 4b\n\t" \
+ ".previous" \
+ : "=&r" (value), "=r" (res) \
+ : "r" (addr), "i" (-EFAULT)); \
+} while (0)
+
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
+/* For CPUs without lwl and ldl instructions */
+#define _LoadWU(addr, value, res, type) \
+do { \
+ __asm__ __volatile__ ( \
+ ".set\tpush\n\t" \
+ ".set\tnoat\n\t" \
+ "1:"type##_lbu("%0", "0(%2)")"\n\t" \
+ "2:"type##_lbu("$1", "1(%2)")"\n\t" \
+ "sll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "3:"type##_lbu("$1", "2(%2)")"\n\t" \
+ "sll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "4:"type##_lbu("$1", "3(%2)")"\n\t" \
+ "sll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "li\t%1, 0\n" \
+ ".set\tpop\n" \
+ "10:\n\t" \
+ ".insn\n\t" \
+ ".section\t.fixup,\"ax\"\n\t" \
+ "11:\tli\t%1, %3\n\t" \
+ "j\t10b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 11b\n\t" \
+ STR(PTR)"\t2b, 11b\n\t" \
+ STR(PTR)"\t3b, 11b\n\t" \
+ STR(PTR)"\t4b, 11b\n\t" \
+ ".previous" \
+ : "=&r" (value), "=r" (res) \
+ : "r" (addr), "i" (-EFAULT)); \
+} while (0)
+
+#define _LoadDW(addr, value, res) \
+do { \
+ __asm__ __volatile__ ( \
+ ".set\tpush\n\t" \
+ ".set\tnoat\n\t" \
+ "1:lb\t%0, 0(%2)\n\t" \
+ "2:lbu\t $1, 1(%2)\n\t" \
+ "dsll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "3:lbu\t$1, 2(%2)\n\t" \
+ "dsll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "4:lbu\t$1, 3(%2)\n\t" \
+ "dsll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "5:lbu\t$1, 4(%2)\n\t" \
+ "dsll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "6:lbu\t$1, 5(%2)\n\t" \
+ "dsll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "7:lbu\t$1, 6(%2)\n\t" \
+ "dsll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "8:lbu\t$1, 7(%2)\n\t" \
+ "dsll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "li\t%1, 0\n" \
+ ".set\tpop\n\t" \
+ "10:\n\t" \
+ ".insn\n\t" \
+ ".section\t.fixup,\"ax\"\n\t" \
+ "11:\tli\t%1, %3\n\t" \
+ "j\t10b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 11b\n\t" \
+ STR(PTR)"\t2b, 11b\n\t" \
+ STR(PTR)"\t3b, 11b\n\t" \
+ STR(PTR)"\t4b, 11b\n\t" \
+ STR(PTR)"\t5b, 11b\n\t" \
+ STR(PTR)"\t6b, 11b\n\t" \
+ STR(PTR)"\t7b, 11b\n\t" \
+ STR(PTR)"\t8b, 11b\n\t" \
+ ".previous" \
+ : "=&r" (value), "=r" (res) \
+ : "r" (addr), "i" (-EFAULT)); \
+} while (0)
+
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
+
+
+#define _StoreHW(addr, value, res, type) \
+do { \
+ __asm__ __volatile__ ( \
+ ".set\tnoat\n" \
+ "1:\t"type##_sb("%1", "1(%2)")"\n" \
+ "srl\t$1, %1, 0x8\n" \
+ "2:\t"type##_sb("$1", "0(%2)")"\n" \
+ ".set\tat\n\t" \
+ "li\t%0, 0\n" \
+ "3:\n\t" \
+ ".insn\n\t" \
+ ".section\t.fixup,\"ax\"\n\t" \
+ "4:\tli\t%0, %3\n\t" \
+ "j\t3b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 4b\n\t" \
+ STR(PTR)"\t2b, 4b\n\t" \
+ ".previous" \
+ : "=r" (res) \
+ : "r" (value), "r" (addr), "i" (-EFAULT));\
+} while (0)
+
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
+#define _StoreW(addr, value, res, type) \
+do { \
+ __asm__ __volatile__ ( \
+ "1:\t"type##_swl("%1", "(%2)")"\n" \
+ "2:\t"type##_swr("%1", "3(%2)")"\n\t"\
+ "li\t%0, 0\n" \
+ "3:\n\t" \
+ ".insn\n\t" \
+ ".section\t.fixup,\"ax\"\n\t" \
+ "4:\tli\t%0, %3\n\t" \
+ "j\t3b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 4b\n\t" \
+ STR(PTR)"\t2b, 4b\n\t" \
+ ".previous" \
+ : "=r" (res) \
+ : "r" (value), "r" (addr), "i" (-EFAULT)); \
+} while (0)
+
+#define _StoreDW(addr, value, res) \
+do { \
+ __asm__ __volatile__ ( \
+ "1:\tsdl\t%1,(%2)\n" \
+ "2:\tsdr\t%1, 7(%2)\n\t" \
+ "li\t%0, 0\n" \
+ "3:\n\t" \
+ ".insn\n\t" \
+ ".section\t.fixup,\"ax\"\n\t" \
+ "4:\tli\t%0, %3\n\t" \
+ "j\t3b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 4b\n\t" \
+ STR(PTR)"\t2b, 4b\n\t" \
+ ".previous" \
+ : "=r" (res) \
+ : "r" (value), "r" (addr), "i" (-EFAULT)); \
+} while (0)
+
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
+#define _StoreW(addr, value, res, type) \
+do { \
+ __asm__ __volatile__ ( \
+ ".set\tpush\n\t" \
+ ".set\tnoat\n\t" \
+ "1:"type##_sb("%1", "3(%2)")"\n\t" \
+ "srl\t$1, %1, 0x8\n\t" \
+ "2:"type##_sb("$1", "2(%2)")"\n\t" \
+ "srl\t$1, $1, 0x8\n\t" \
+ "3:"type##_sb("$1", "1(%2)")"\n\t" \
+ "srl\t$1, $1, 0x8\n\t" \
+ "4:"type##_sb("$1", "0(%2)")"\n\t" \
+ ".set\tpop\n\t" \
+ "li\t%0, 0\n" \
+ "10:\n\t" \
+ ".insn\n\t" \
+ ".section\t.fixup,\"ax\"\n\t" \
+ "11:\tli\t%0, %3\n\t" \
+ "j\t10b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 11b\n\t" \
+ STR(PTR)"\t2b, 11b\n\t" \
+ STR(PTR)"\t3b, 11b\n\t" \
+ STR(PTR)"\t4b, 11b\n\t" \
+ ".previous" \
+ : "=&r" (res) \
+ : "r" (value), "r" (addr), "i" (-EFAULT) \
+ : "memory"); \
+} while (0)
+
+#define _StoreDW(addr, value, res) \
+do { \
+ __asm__ __volatile__ ( \
+ ".set\tpush\n\t" \
+ ".set\tnoat\n\t" \
+ "1:sb\t%1, 7(%2)\n\t" \
+ "dsrl\t$1, %1, 0x8\n\t" \
+ "2:sb\t$1, 6(%2)\n\t" \
+ "dsrl\t$1, $1, 0x8\n\t" \
+ "3:sb\t$1, 5(%2)\n\t" \
+ "dsrl\t$1, $1, 0x8\n\t" \
+ "4:sb\t$1, 4(%2)\n\t" \
+ "dsrl\t$1, $1, 0x8\n\t" \
+ "5:sb\t$1, 3(%2)\n\t" \
+ "dsrl\t$1, $1, 0x8\n\t" \
+ "6:sb\t$1, 2(%2)\n\t" \
+ "dsrl\t$1, $1, 0x8\n\t" \
+ "7:sb\t$1, 1(%2)\n\t" \
+ "dsrl\t$1, $1, 0x8\n\t" \
+ "8:sb\t$1, 0(%2)\n\t" \
+ "dsrl\t$1, $1, 0x8\n\t" \
+ ".set\tpop\n\t" \
+ "li\t%0, 0\n" \
+ "10:\n\t" \
+ ".insn\n\t" \
+ ".section\t.fixup,\"ax\"\n\t" \
+ "11:\tli\t%0, %3\n\t" \
+ "j\t10b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 11b\n\t" \
+ STR(PTR)"\t2b, 11b\n\t" \
+ STR(PTR)"\t3b, 11b\n\t" \
+ STR(PTR)"\t4b, 11b\n\t" \
+ STR(PTR)"\t5b, 11b\n\t" \
+ STR(PTR)"\t6b, 11b\n\t" \
+ STR(PTR)"\t7b, 11b\n\t" \
+ STR(PTR)"\t8b, 11b\n\t" \
+ ".previous" \
+ : "=&r" (res) \
+ : "r" (value), "r" (addr), "i" (-EFAULT) \
+ : "memory"); \
+} while (0)
+
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
+
+#else /* __BIG_ENDIAN */
+
+#define _LoadHW(addr, value, res, type) \
+do { \
+ __asm__ __volatile__ (".set\tnoat\n" \
+ "1:\t"type##_lb("%0", "1(%2)")"\n" \
+ "2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
+ "sll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "li\t%1, 0\n" \
+ "3:\t.set\tat\n\t" \
+ ".insn\n\t" \
+ ".section\t.fixup,\"ax\"\n\t" \
+ "4:\tli\t%1, %3\n\t" \
+ "j\t3b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 4b\n\t" \
+ STR(PTR)"\t2b, 4b\n\t" \
+ ".previous" \
+ : "=&r" (value), "=r" (res) \
+ : "r" (addr), "i" (-EFAULT)); \
+} while (0)
+
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
+#define _LoadW(addr, value, res, type) \
+do { \
+ __asm__ __volatile__ ( \
+ "1:\t"type##_lwl("%0", "3(%2)")"\n" \
+ "2:\t"type##_lwr("%0", "(%2)")"\n\t"\
+ "li\t%1, 0\n" \
+ "3:\n\t" \
+ ".insn\n\t" \
+ ".section\t.fixup,\"ax\"\n\t" \
+ "4:\tli\t%1, %3\n\t" \
+ "j\t3b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 4b\n\t" \
+ STR(PTR)"\t2b, 4b\n\t" \
+ ".previous" \
+ : "=&r" (value), "=r" (res) \
+ : "r" (addr), "i" (-EFAULT)); \
+} while (0)
+
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
+/* For CPUs without lwl instruction */
+#define _LoadW(addr, value, res, type) \
+do { \
+ __asm__ __volatile__ ( \
+ ".set\tpush\n" \
+ ".set\tnoat\n\t" \
+ "1:"type##_lb("%0", "3(%2)")"\n\t" \
+ "2:"type##_lbu("$1", "2(%2)")"\n\t" \
+ "sll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "3:"type##_lbu("$1", "1(%2)")"\n\t" \
+ "sll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "4:"type##_lbu("$1", "0(%2)")"\n\t" \
+ "sll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "li\t%1, 0\n" \
+ ".set\tpop\n" \
+ "10:\n\t" \
+ ".insn\n\t" \
+ ".section\t.fixup,\"ax\"\n\t" \
+ "11:\tli\t%1, %3\n\t" \
+ "j\t10b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 11b\n\t" \
+ STR(PTR)"\t2b, 11b\n\t" \
+ STR(PTR)"\t3b, 11b\n\t" \
+ STR(PTR)"\t4b, 11b\n\t" \
+ ".previous" \
+ : "=&r" (value), "=r" (res) \
+ : "r" (addr), "i" (-EFAULT)); \
+} while (0)
+
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
+
+
+#define _LoadHWU(addr, value, res, type) \
+do { \
+ __asm__ __volatile__ ( \
+ ".set\tnoat\n" \
+ "1:\t"type##_lbu("%0", "1(%2)")"\n" \
+ "2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
+ "sll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "li\t%1, 0\n" \
+ "3:\n\t" \
+ ".insn\n\t" \
+ ".set\tat\n\t" \
+ ".section\t.fixup,\"ax\"\n\t" \
+ "4:\tli\t%1, %3\n\t" \
+ "j\t3b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 4b\n\t" \
+ STR(PTR)"\t2b, 4b\n\t" \
+ ".previous" \
+ : "=&r" (value), "=r" (res) \
+ : "r" (addr), "i" (-EFAULT)); \
+} while (0)
+
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
+#define _LoadWU(addr, value, res, type) \
+do { \
+ __asm__ __volatile__ ( \
+ "1:\t"type##_lwl("%0", "3(%2)")"\n" \
+ "2:\t"type##_lwr("%0", "(%2)")"\n\t"\
+ "dsll\t%0, %0, 32\n\t" \
+ "dsrl\t%0, %0, 32\n\t" \
+ "li\t%1, 0\n" \
+ "3:\n\t" \
+ ".insn\n\t" \
+ "\t.section\t.fixup,\"ax\"\n\t" \
+ "4:\tli\t%1, %3\n\t" \
+ "j\t3b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 4b\n\t" \
+ STR(PTR)"\t2b, 4b\n\t" \
+ ".previous" \
+ : "=&r" (value), "=r" (res) \
+ : "r" (addr), "i" (-EFAULT)); \
+} while (0)
+
+#define _LoadDW(addr, value, res) \
+do { \
+ __asm__ __volatile__ ( \
+ "1:\tldl\t%0, 7(%2)\n" \
+ "2:\tldr\t%0, (%2)\n\t" \
+ "li\t%1, 0\n" \
+ "3:\n\t" \
+ ".insn\n\t" \
+ "\t.section\t.fixup,\"ax\"\n\t" \
+ "4:\tli\t%1, %3\n\t" \
+ "j\t3b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 4b\n\t" \
+ STR(PTR)"\t2b, 4b\n\t" \
+ ".previous" \
+ : "=&r" (value), "=r" (res) \
+ : "r" (addr), "i" (-EFAULT)); \
+} while (0)
+
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
+/* For CPUs without lwl and ldl instructions */
+#define _LoadWU(addr, value, res, type) \
+do { \
+ __asm__ __volatile__ ( \
+ ".set\tpush\n\t" \
+ ".set\tnoat\n\t" \
+ "1:"type##_lbu("%0", "3(%2)")"\n\t" \
+ "2:"type##_lbu("$1", "2(%2)")"\n\t" \
+ "sll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "3:"type##_lbu("$1", "1(%2)")"\n\t" \
+ "sll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "4:"type##_lbu("$1", "0(%2)")"\n\t" \
+ "sll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "li\t%1, 0\n" \
+ ".set\tpop\n" \
+ "10:\n\t" \
+ ".insn\n\t" \
+ ".section\t.fixup,\"ax\"\n\t" \
+ "11:\tli\t%1, %3\n\t" \
+ "j\t10b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 11b\n\t" \
+ STR(PTR)"\t2b, 11b\n\t" \
+ STR(PTR)"\t3b, 11b\n\t" \
+ STR(PTR)"\t4b, 11b\n\t" \
+ ".previous" \
+ : "=&r" (value), "=r" (res) \
+ : "r" (addr), "i" (-EFAULT)); \
+} while (0)
+
+#define _LoadDW(addr, value, res) \
+do { \
+ __asm__ __volatile__ ( \
+ ".set\tpush\n\t" \
+ ".set\tnoat\n\t" \
+ "1:lb\t%0, 7(%2)\n\t" \
+ "2:lbu\t$1, 6(%2)\n\t" \
+ "dsll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "3:lbu\t$1, 5(%2)\n\t" \
+ "dsll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "4:lbu\t$1, 4(%2)\n\t" \
+ "dsll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "5:lbu\t$1, 3(%2)\n\t" \
+ "dsll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "6:lbu\t$1, 2(%2)\n\t" \
+ "dsll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "7:lbu\t$1, 1(%2)\n\t" \
+ "dsll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "8:lbu\t$1, 0(%2)\n\t" \
+ "dsll\t%0, 0x8\n\t" \
+ "or\t%0, $1\n\t" \
+ "li\t%1, 0\n" \
+ ".set\tpop\n\t" \
+ "10:\n\t" \
+ ".insn\n\t" \
+ ".section\t.fixup,\"ax\"\n\t" \
+ "11:\tli\t%1, %3\n\t" \
+ "j\t10b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 11b\n\t" \
+ STR(PTR)"\t2b, 11b\n\t" \
+ STR(PTR)"\t3b, 11b\n\t" \
+ STR(PTR)"\t4b, 11b\n\t" \
+ STR(PTR)"\t5b, 11b\n\t" \
+ STR(PTR)"\t6b, 11b\n\t" \
+ STR(PTR)"\t7b, 11b\n\t" \
+ STR(PTR)"\t8b, 11b\n\t" \
+ ".previous" \
+ : "=&r" (value), "=r" (res) \
+ : "r" (addr), "i" (-EFAULT)); \
+} while (0)
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
+
+#define _StoreHW(addr, value, res, type) \
+do { \
+ __asm__ __volatile__ ( \
+ ".set\tnoat\n" \
+ "1:\t"type##_sb("%1", "0(%2)")"\n" \
+ "srl\t$1,%1, 0x8\n" \
+ "2:\t"type##_sb("$1", "1(%2)")"\n" \
+ ".set\tat\n\t" \
+ "li\t%0, 0\n" \
+ "3:\n\t" \
+ ".insn\n\t" \
+ ".section\t.fixup,\"ax\"\n\t" \
+ "4:\tli\t%0, %3\n\t" \
+ "j\t3b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 4b\n\t" \
+ STR(PTR)"\t2b, 4b\n\t" \
+ ".previous" \
+ : "=r" (res) \
+ : "r" (value), "r" (addr), "i" (-EFAULT));\
+} while (0)
+
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
+#define _StoreW(addr, value, res, type) \
+do { \
+ __asm__ __volatile__ ( \
+ "1:\t"type##_swl("%1", "3(%2)")"\n" \
+ "2:\t"type##_swr("%1", "(%2)")"\n\t"\
+ "li\t%0, 0\n" \
+ "3:\n\t" \
+ ".insn\n\t" \
+ ".section\t.fixup,\"ax\"\n\t" \
+ "4:\tli\t%0, %3\n\t" \
+ "j\t3b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 4b\n\t" \
+ STR(PTR)"\t2b, 4b\n\t" \
+ ".previous" \
+ : "=r" (res) \
+ : "r" (value), "r" (addr), "i" (-EFAULT)); \
+} while (0)
+
+#define _StoreDW(addr, value, res) \
+do { \
+ __asm__ __volatile__ ( \
+ "1:\tsdl\t%1, 7(%2)\n" \
+ "2:\tsdr\t%1, (%2)\n\t" \
+ "li\t%0, 0\n" \
+ "3:\n\t" \
+ ".insn\n\t" \
+ ".section\t.fixup,\"ax\"\n\t" \
+ "4:\tli\t%0, %3\n\t" \
+ "j\t3b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 4b\n\t" \
+ STR(PTR)"\t2b, 4b\n\t" \
+ ".previous" \
+ : "=r" (res) \
+ : "r" (value), "r" (addr), "i" (-EFAULT)); \
+} while (0)
+
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
+/* For CPUs without swl and sdl instructions */
+#define _StoreW(addr, value, res, type) \
+do { \
+ __asm__ __volatile__ ( \
+ ".set\tpush\n\t" \
+ ".set\tnoat\n\t" \
+ "1:"type##_sb("%1", "0(%2)")"\n\t" \
+ "srl\t$1, %1, 0x8\n\t" \
+ "2:"type##_sb("$1", "1(%2)")"\n\t" \
+ "srl\t$1, $1, 0x8\n\t" \
+ "3:"type##_sb("$1", "2(%2)")"\n\t" \
+ "srl\t$1, $1, 0x8\n\t" \
+ "4:"type##_sb("$1", "3(%2)")"\n\t" \
+ ".set\tpop\n\t" \
+ "li\t%0, 0\n" \
+ "10:\n\t" \
+ ".insn\n\t" \
+ ".section\t.fixup,\"ax\"\n\t" \
+ "11:\tli\t%0, %3\n\t" \
+ "j\t10b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 11b\n\t" \
+ STR(PTR)"\t2b, 11b\n\t" \
+ STR(PTR)"\t3b, 11b\n\t" \
+ STR(PTR)"\t4b, 11b\n\t" \
+ ".previous" \
+ : "=&r" (res) \
+ : "r" (value), "r" (addr), "i" (-EFAULT) \
+ : "memory"); \
+} while (0)
+
+#define _StoreDW(addr, value, res) \
+do { \
+ __asm__ __volatile__ ( \
+ ".set\tpush\n\t" \
+ ".set\tnoat\n\t" \
+ "1:sb\t%1, 0(%2)\n\t" \
+ "dsrl\t$1, %1, 0x8\n\t" \
+ "2:sb\t$1, 1(%2)\n\t" \
+ "dsrl\t$1, $1, 0x8\n\t" \
+ "3:sb\t$1, 2(%2)\n\t" \
+ "dsrl\t$1, $1, 0x8\n\t" \
+ "4:sb\t$1, 3(%2)\n\t" \
+ "dsrl\t$1, $1, 0x8\n\t" \
+ "5:sb\t$1, 4(%2)\n\t" \
+ "dsrl\t$1, $1, 0x8\n\t" \
+ "6:sb\t$1, 5(%2)\n\t" \
+ "dsrl\t$1, $1, 0x8\n\t" \
+ "7:sb\t$1, 6(%2)\n\t" \
+ "dsrl\t$1, $1, 0x8\n\t" \
+ "8:sb\t$1, 7(%2)\n\t" \
+ "dsrl\t$1, $1, 0x8\n\t" \
+ ".set\tpop\n\t" \
+ "li\t%0, 0\n" \
+ "10:\n\t" \
+ ".insn\n\t" \
+ ".section\t.fixup,\"ax\"\n\t" \
+ "11:\tli\t%0, %3\n\t" \
+ "j\t10b\n\t" \
+ ".previous\n\t" \
+ ".section\t__ex_table,\"a\"\n\t" \
+ STR(PTR)"\t1b, 11b\n\t" \
+ STR(PTR)"\t2b, 11b\n\t" \
+ STR(PTR)"\t3b, 11b\n\t" \
+ STR(PTR)"\t4b, 11b\n\t" \
+ STR(PTR)"\t5b, 11b\n\t" \
+ STR(PTR)"\t6b, 11b\n\t" \
+ STR(PTR)"\t7b, 11b\n\t" \
+ STR(PTR)"\t8b, 11b\n\t" \
+ ".previous" \
+ : "=&r" (res) \
+ : "r" (value), "r" (addr), "i" (-EFAULT) \
+ : "memory"); \
+} while (0)
+
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
+#endif
+
+#define LoadHWU(addr, value, res) _LoadHWU(addr, value, res, kernel)
+#define LoadHWUE(addr, value, res) _LoadHWU(addr, value, res, user)
+#define LoadWU(addr, value, res) _LoadWU(addr, value, res, kernel)
+#define LoadWUE(addr, value, res) _LoadWU(addr, value, res, user)
+#define LoadHW(addr, value, res) _LoadHW(addr, value, res, kernel)
+#define LoadHWE(addr, value, res) _LoadHW(addr, value, res, user)
+#define LoadW(addr, value, res) _LoadW(addr, value, res, kernel)
+#define LoadWE(addr, value, res) _LoadW(addr, value, res, user)
+#define LoadDW(addr, value, res) _LoadDW(addr, value, res)
+
+#define StoreHW(addr, value, res) _StoreHW(addr, value, res, kernel)
+#define StoreHWE(addr, value, res) _StoreHW(addr, value, res, user)
+#define StoreW(addr, value, res) _StoreW(addr, value, res, kernel)
+#define StoreWE(addr, value, res) _StoreW(addr, value, res, user)
+#define StoreDW(addr, value, res) _StoreDW(addr, value, res)
+
+#endif /* _ASM_MIPS_UNALIGNED_EMUL_H */
diff --git a/arch/mips/include/asm/vermagic.h b/arch/mips/include/asm/vermagic.h
index 24dc3d35161c..4d2dae0c7c57 100644
--- a/arch/mips/include/asm/vermagic.h
+++ b/arch/mips/include/asm/vermagic.h
@@ -8,12 +8,16 @@
#define MODULE_PROC_FAMILY "MIPS32_R1 "
#elif defined CONFIG_CPU_MIPS32_R2
#define MODULE_PROC_FAMILY "MIPS32_R2 "
+#elif defined CONFIG_CPU_MIPS32_R5
+#define MODULE_PROC_FAMILY "MIPS32_R5 "
#elif defined CONFIG_CPU_MIPS32_R6
#define MODULE_PROC_FAMILY "MIPS32_R6 "
#elif defined CONFIG_CPU_MIPS64_R1
#define MODULE_PROC_FAMILY "MIPS64_R1 "
#elif defined CONFIG_CPU_MIPS64_R2
#define MODULE_PROC_FAMILY "MIPS64_R2 "
+#elif defined CONFIG_CPU_MIPS64_R5
+#define MODULE_PROC_FAMILY "MIPS64_R5 "
#elif defined CONFIG_CPU_MIPS64_R6
#define MODULE_PROC_FAMILY "MIPS64_R6 "
#elif defined CONFIG_CPU_R3000
@@ -46,6 +50,8 @@
#define MODULE_PROC_FAMILY "LOONGSON64 "
#elif defined CONFIG_CPU_CAVIUM_OCTEON
#define MODULE_PROC_FAMILY "OCTEON "
+#elif defined CONFIG_CPU_P5600
+#define MODULE_PROC_FAMILY "P5600 "
#elif defined CONFIG_CPU_XLR
#define MODULE_PROC_FAMILY "XLR "
#elif defined CONFIG_CPU_XLP
diff --git a/arch/mips/include/uapi/asm/hwcap.h b/arch/mips/include/uapi/asm/hwcap.h
index 1ade1daa4921..b7e02bdc1985 100644
--- a/arch/mips/include/uapi/asm/hwcap.h
+++ b/arch/mips/include/uapi/asm/hwcap.h
@@ -17,5 +17,6 @@
#define HWCAP_LOONGSON_MMI (1 << 11)
#define HWCAP_LOONGSON_EXT (1 << 12)
#define HWCAP_LOONGSON_EXT2 (1 << 13)
+#define HWCAP_LOONGSON_CPUCFG (1 << 14)
#endif /* _UAPI_ASM_HWCAP_H */
diff --git a/arch/mips/include/uapi/asm/inst.h b/arch/mips/include/uapi/asm/inst.h
index eaa3a80affdf..98f97c85e059 100644
--- a/arch/mips/include/uapi/asm/inst.h
+++ b/arch/mips/include/uapi/asm/inst.h
@@ -989,6 +989,30 @@ struct mm16_r5_format { /* Load/store from stack pointer format */
};
/*
+ * Loongson-3 overridden COP2 instruction formats (32-bit length)
+ */
+struct loongson3_lswc2_format { /* Loongson-3 overridden lwc2/swc2 Load/Store format */
+ __BITFIELD_FIELD(unsigned int opcode : 6,
+ __BITFIELD_FIELD(unsigned int base : 5,
+ __BITFIELD_FIELD(unsigned int rt : 5,
+ __BITFIELD_FIELD(unsigned int fr : 1,
+ __BITFIELD_FIELD(unsigned int offset : 9,
+ __BITFIELD_FIELD(unsigned int ls : 1,
+ __BITFIELD_FIELD(unsigned int rq : 5,
+ ;)))))))
+};
+
+struct loongson3_lsdc2_format { /* Loongson-3 overridden ldc2/sdc2 Load/Store format */
+ __BITFIELD_FIELD(unsigned int opcode : 6,
+ __BITFIELD_FIELD(unsigned int base : 5,
+ __BITFIELD_FIELD(unsigned int rt : 5,
+ __BITFIELD_FIELD(unsigned int index : 5,
+ __BITFIELD_FIELD(unsigned int offset : 8,
+ __BITFIELD_FIELD(unsigned int opcode1 : 3,
+ ;))))))
+};
+
+/*
* MIPS16e instruction formats (16-bit length)
*/
struct m16e_rr {
@@ -1088,6 +1112,8 @@ union mips_instruction {
struct mm16_rb_format mm16_rb_format;
struct mm16_r3_format mm16_r3_format;
struct mm16_r5_format mm16_r5_format;
+ struct loongson3_lswc2_format loongson3_lswc2_format;
+ struct loongson3_lsdc2_format loongson3_lsdc2_format;
};
union mips16e_instruction {
diff --git a/arch/mips/jazz/Platform b/arch/mips/jazz/Platform
index 3373788acca1..eb0490ae8b09 100644
--- a/arch/mips/jazz/Platform
+++ b/arch/mips/jazz/Platform
@@ -1,6 +1,5 @@
#
# Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
#
-platform-$(CONFIG_MACH_JAZZ) += jazz/
cflags-$(CONFIG_MACH_JAZZ) += -I$(srctree)/arch/mips/include/asm/mach-jazz
load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000
diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
index 412d2faa3cdf..9c2e8c15bb97 100644
--- a/arch/mips/jz4740/Kconfig
+++ b/arch/mips/jz4740/Kconfig
@@ -2,7 +2,14 @@
choice
prompt "Machine type"
depends on MACH_INGENIC
- default JZ4740_QI_LB60
+ default INGENIC_GENERIC_BOARD
+
+config INGENIC_GENERIC_BOARD
+ bool "Generic board"
+ select MACH_JZ4740
+ select MACH_JZ4770
+ select MACH_JZ4780
+ select MACH_X1000
config JZ4740_QI_LB60
bool "Qi Hardware Ben NanoNote"
diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile
index 6de14c0deb4e..f96c0f5eca44 100644
--- a/arch/mips/jz4740/Makefile
+++ b/arch/mips/jz4740/Makefile
@@ -4,11 +4,6 @@
#
# Object file lists.
-
-obj-y += prom.o time.o reset.o setup.o timer.o
+obj-y += setup.o
CFLAGS_setup.o = -I$(src)/../../../scripts/dtc/libfdt
-
-# PM support
-
-obj-$(CONFIG_PM) += pm.o
diff --git a/arch/mips/jz4740/Platform b/arch/mips/jz4740/Platform
index a2a5a85ea1f9..bd35d0621b13 100644
--- a/arch/mips/jz4740/Platform
+++ b/arch/mips/jz4740/Platform
@@ -1,4 +1,3 @@
-platform-$(CONFIG_MACH_INGENIC) += jz4740/
cflags-$(CONFIG_MACH_INGENIC) += -I$(srctree)/arch/mips/include/asm/mach-jz4740
load-$(CONFIG_MACH_INGENIC) += 0xffffffff80010000
zload-$(CONFIG_MACH_INGENIC) += 0xffffffff81000000
diff --git a/arch/mips/jz4740/pm.c b/arch/mips/jz4740/pm.c
deleted file mode 100644
index f9b551f01f42..000000000000
--- a/arch/mips/jz4740/pm.c
+++ /dev/null
@@ -1,34 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- * JZ4740 SoC power management support
- */
-
-#include <linux/init.h>
-#include <linux/pm.h>
-#include <linux/delay.h>
-#include <linux/suspend.h>
-
-static int jz4740_pm_enter(suspend_state_t state)
-{
- __asm__(".set\tmips3\n\t"
- "wait\n\t"
- ".set\tmips0");
-
-
-
- return 0;
-}
-
-static const struct platform_suspend_ops jz4740_pm_ops = {
- .valid = suspend_valid_only_mem,
- .enter = jz4740_pm_enter,
-};
-
-static int __init jz4740_pm_init(void)
-{
- suspend_set_ops(&jz4740_pm_ops);
- return 0;
-
-}
-late_initcall(jz4740_pm_init);
diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
deleted file mode 100644
index ff4555c3fb15..000000000000
--- a/arch/mips/jz4740/prom.c
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- * JZ4740 SoC prom code
- */
-
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/fw/fw.h>
-
-void __init prom_init(void)
-{
- fw_init_cmdline();
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
diff --git a/arch/mips/jz4740/reset.c b/arch/mips/jz4740/reset.c
deleted file mode 100644
index 1f9f02e54085..000000000000
--- a/arch/mips/jz4740/reset.c
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- */
-
-#include <asm/reboot.h>
-
-#include "reset.h"
-
-static void jz4740_halt(void)
-{
- while (1) {
- __asm__(".set push;\n"
- ".set mips3;\n"
- "wait;\n"
- ".set pop;\n"
- );
- }
-}
-
-void jz4740_reset_init(void)
-{
- _machine_halt = jz4740_halt;
-}
diff --git a/arch/mips/jz4740/reset.h b/arch/mips/jz4740/reset.h
deleted file mode 100644
index 4e8746ee9b61..000000000000
--- a/arch/mips/jz4740/reset.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MIPS_JZ4740_RESET_H__
-#define __MIPS_JZ4740_RESET_H__
-
-extern void jz4740_reset_init(void);
-
-#endif
diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
index 880c26857aff..61468a87775c 100644
--- a/arch/mips/jz4740/setup.c
+++ b/arch/mips/jz4740/setup.c
@@ -5,17 +5,22 @@
* JZ4740 setup code
*/
+#include <linux/clocksource.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irqchip.h>
#include <linux/kernel.h>
#include <linux/libfdt.h>
+#include <linux/of_clk.h>
#include <linux/of_fdt.h>
+#include <linux/pm.h>
+#include <linux/suspend.h>
#include <asm/bootinfo.h>
+#include <asm/fw/fw.h>
#include <asm/prom.h>
-
-#include "reset.h"
+#include <asm/reboot.h>
+#include <asm/time.h>
#define JZ4740_EMC_BASE_ADDR 0x13010000
@@ -61,8 +66,6 @@ void __init plat_mem_setup(void)
int offset;
void *dtb;
- jz4740_reset_init();
-
if (__dtb_start != __dtb_end)
dtb = __dtb_start;
else
@@ -105,3 +108,56 @@ void __init arch_init_irq(void)
{
irqchip_init();
}
+
+void __init plat_time_init(void)
+{
+ of_clk_init(NULL);
+ timer_probe();
+}
+
+void __init prom_init(void)
+{
+ fw_init_cmdline();
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
+
+static void jz4740_wait_instr(void)
+{
+ __asm__(".set push;\n"
+ ".set mips3;\n"
+ "wait;\n"
+ ".set pop;\n"
+ );
+}
+
+static void jz4740_halt(void)
+{
+ for (;;)
+ jz4740_wait_instr();
+}
+
+static int __maybe_unused jz4740_pm_enter(suspend_state_t state)
+{
+ jz4740_wait_instr();
+
+ return 0;
+}
+
+static const struct platform_suspend_ops jz4740_pm_ops __maybe_unused = {
+ .valid = suspend_valid_only_mem,
+ .enter = jz4740_pm_enter,
+};
+
+static int __init jz4740_pm_init(void)
+{
+ if (IS_ENABLED(CONFIG_PM_SLEEP))
+ suspend_set_ops(&jz4740_pm_ops);
+ _machine_halt = jz4740_halt;
+
+ return 0;
+
+}
+late_initcall(jz4740_pm_init);
diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
deleted file mode 100644
index 605a84a250bf..000000000000
--- a/arch/mips/jz4740/time.c
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- * JZ4740 platform time support
- */
-
-#include <linux/clocksource.h>
-#include <linux/of_clk.h>
-
-#include <asm/mach-jz4740/timer.h>
-
-void __init plat_time_init(void)
-{
- of_clk_init(NULL);
- jz4740_timer_init();
- timer_probe();
-}
diff --git a/arch/mips/jz4740/timer.c b/arch/mips/jz4740/timer.c
deleted file mode 100644
index 5c9f82de6a82..000000000000
--- a/arch/mips/jz4740/timer.c
+++ /dev/null
@@ -1,42 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- * JZ4740 platform timer support
- */
-
-#include <linux/export.h>
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <asm/mach-jz4740/base.h>
-#include <asm/mach-jz4740/timer.h>
-
-void __iomem *jz4740_timer_base;
-EXPORT_SYMBOL_GPL(jz4740_timer_base);
-
-void jz4740_timer_enable_watchdog(void)
-{
- writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_CLEAR);
-}
-EXPORT_SYMBOL_GPL(jz4740_timer_enable_watchdog);
-
-void jz4740_timer_disable_watchdog(void)
-{
- writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_SET);
-}
-EXPORT_SYMBOL_GPL(jz4740_timer_disable_watchdog);
-
-void __init jz4740_timer_init(void)
-{
- jz4740_timer_base = ioremap(JZ4740_TCU_BASE_ADDR, 0x100);
-
- if (!jz4740_timer_base)
- panic("Failed to ioremap timer registers");
-
- /* Disable all timer clocks except for those used as system timers */
- writel(0x000100fc, jz4740_timer_base + JZ_REG_TIMER_STOP_SET);
-
- /* Timer irqs are unmasked by default, mask them */
- writel(0x00ff00ff, jz4740_timer_base + JZ_REG_TIMER_MASK_SET);
-}
diff --git a/arch/mips/kernel/8250-platform.c b/arch/mips/kernel/8250-platform.c
deleted file mode 100644
index 5c6b2ab1f56e..000000000000
--- a/arch/mips/kernel/8250-platform.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
- */
-#include <linux/init.h>
-#include <linux/serial_8250.h>
-
-#define PORT(base, int) \
-{ \
- .iobase = base, \
- .irq = int, \
- .uartclk = 1843200, \
- .iotype = UPIO_PORT, \
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
- .regshift = 0, \
-}
-
-static struct plat_serial8250_port uart8250_data[] = {
- PORT(0x3F8, 4),
- PORT(0x2F8, 3),
- PORT(0x3E8, 4),
- PORT(0x2E8, 3),
- { },
-};
-
-static struct platform_device uart8250_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = uart8250_data,
- },
-};
-
-static int __init uart8250_init(void)
-{
- return platform_device_register(&uart8250_device);
-}
-
-module_init(uart8250_init);
-
-MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Generic 8250 UART probe driver");
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index d6e97df51cfb..8c7a043295ed 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -98,8 +98,6 @@ obj-$(CONFIG_MIPSR2_TO_R6_EMULATOR) += mips-r2-to-r6-emul.o
CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -x c /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
-obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT) += 8250-platform.o
-
obj-$(CONFIG_PERF_EVENTS) += perf_event.o
obj-$(CONFIG_HW_PERF_EVENTS) += perf_event_mipsxx.o
diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c
index 2c38f75d87ff..fb3e203698ea 100644
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -90,7 +90,7 @@ int __mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
regs->regs[31] = regs->cp0_epc +
dec_insn.pc_inc +
dec_insn.next_pc_inc;
- /* Fall through */
+ fallthrough;
case mm_bltz_op:
if ((long)regs->regs[insn.mm_i_format.rs] < 0)
*contpc = regs->cp0_epc +
@@ -106,7 +106,7 @@ int __mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
regs->regs[31] = regs->cp0_epc +
dec_insn.pc_inc +
dec_insn.next_pc_inc;
- /* Fall through */
+ fallthrough;
case mm_bgez_op:
if ((long)regs->regs[insn.mm_i_format.rs] >= 0)
*contpc = regs->cp0_epc +
@@ -144,7 +144,7 @@ int __mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
unsigned int bit;
bc_false = 1;
- /* Fall through */
+ fallthrough;
case mm_bc2t_op:
case mm_bc1t_op:
preempt_disable();
@@ -178,7 +178,7 @@ int __mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
case mm_jalrs16_op:
regs->regs[31] = regs->cp0_epc +
dec_insn.pc_inc + dec_insn.next_pc_inc;
- /* Fall through */
+ fallthrough;
case mm_jr16_op:
*contpc = regs->regs[insn.mm_i_format.rs];
return 1;
@@ -239,7 +239,7 @@ int __mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
case mm_jal32_op:
regs->regs[31] = regs->cp0_epc +
dec_insn.pc_inc + dec_insn.next_pc_inc;
- /* Fall through */
+ fallthrough;
case mm_j32_op:
*contpc = regs->cp0_epc + dec_insn.pc_inc;
*contpc >>= 27;
@@ -432,7 +432,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs,
switch (insn.r_format.func) {
case jalr_op:
regs->regs[insn.r_format.rd] = epc + 8;
- /* Fall through */
+ fallthrough;
case jr_op:
if (NO_R6EMU && insn.r_format.func == jr_op)
goto sigill_r2r6;
@@ -451,7 +451,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs,
case bltzl_op:
if (NO_R6EMU)
goto sigill_r2r6;
- /* fall through */
+ fallthrough;
case bltz_op:
if ((long)regs->regs[insn.i_format.rs] < 0) {
epc = epc + 4 + (insn.i_format.simmediate << 2);
@@ -465,7 +465,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs,
case bgezl_op:
if (NO_R6EMU)
goto sigill_r2r6;
- /* fall through */
+ fallthrough;
case bgez_op:
if ((long)regs->regs[insn.i_format.rs] >= 0) {
epc = epc + 4 + (insn.i_format.simmediate << 2);
@@ -561,7 +561,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs,
case jalx_op:
case jal_op:
regs->regs[31] = regs->cp0_epc + 8;
- /* fall through */
+ fallthrough;
case j_op:
epc += 4;
epc >>= 28;
@@ -578,7 +578,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs,
case beql_op:
if (NO_R6EMU)
goto sigill_r2r6;
- /* fall through */
+ fallthrough;
case beq_op:
if (regs->regs[insn.i_format.rs] ==
regs->regs[insn.i_format.rt]) {
@@ -593,7 +593,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs,
case bnel_op:
if (NO_R6EMU)
goto sigill_r2r6;
- /* fall through */
+ fallthrough;
case bne_op:
if (regs->regs[insn.i_format.rs] !=
regs->regs[insn.i_format.rt]) {
@@ -608,7 +608,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs,
case blezl_op: /* not really i_format */
if (!insn.i_format.rt && NO_R6EMU)
goto sigill_r2r6;
- /* fall through */
+ fallthrough;
case blez_op:
/*
* Compact branches for R6 for the
@@ -644,7 +644,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs,
case bgtzl_op:
if (!insn.i_format.rt && NO_R6EMU)
goto sigill_r2r6;
- /* fall through */
+ fallthrough;
case bgtz_op:
/*
* Compact branches for R6 for the
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index 17a9cbb8b3df..995ad9e69ded 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -8,6 +8,7 @@
*/
#include <linux/clockchips.h>
#include <linux/interrupt.h>
+#include <linux/cpufreq.h>
#include <linux/percpu.h>
#include <linux/smp.h>
#include <linux/irq.h>
@@ -250,6 +251,49 @@ unsigned int __weak get_c0_compare_int(void)
return MIPS_CPU_IRQ_BASE + cp0_compare_irq;
}
+#ifdef CONFIG_CPU_FREQ
+
+static unsigned long mips_ref_freq;
+
+static int r4k_cpufreq_callback(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct cpufreq_freqs *freq = data;
+ struct clock_event_device *cd;
+ unsigned long rate;
+ int cpu;
+
+ if (!mips_ref_freq)
+ mips_ref_freq = freq->old;
+
+ if (val == CPUFREQ_POSTCHANGE) {
+ rate = cpufreq_scale(mips_hpt_frequency, mips_ref_freq,
+ freq->new);
+
+ for_each_cpu(cpu, freq->policy->cpus) {
+ cd = &per_cpu(mips_clockevent_device, cpu);
+
+ clockevents_update_freq(cd, rate);
+ }
+ }
+
+ return 0;
+}
+
+static struct notifier_block r4k_cpufreq_notifier = {
+ .notifier_call = r4k_cpufreq_callback,
+};
+
+static int __init r4k_register_cpufreq_notifier(void)
+{
+ return cpufreq_register_notifier(&r4k_cpufreq_notifier,
+ CPUFREQ_TRANSITION_NOTIFIER);
+
+}
+core_initcall(r4k_register_cpufreq_notifier);
+
+#endif /* !CONFIG_CPU_FREQ */
+
int r4k_clockevent_init(void)
{
unsigned long flags = IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED;
diff --git a/arch/mips/kernel/cps-vec-ns16550.S b/arch/mips/kernel/cps-vec-ns16550.S
index d5a67b4ce9f6..30725e1df987 100644
--- a/arch/mips/kernel/cps-vec-ns16550.S
+++ b/arch/mips/kernel/cps-vec-ns16550.S
@@ -14,16 +14,30 @@
#define UART_TX_OFS (UART_TX << CONFIG_MIPS_CPS_NS16550_SHIFT)
#define UART_LSR_OFS (UART_LSR << CONFIG_MIPS_CPS_NS16550_SHIFT)
+#if CONFIG_MIPS_CPS_NS16550_WIDTH == 1
+# define UART_L lb
+# define UART_S sb
+#elif CONFIG_MIPS_CPS_NS16550_WIDTH == 2
+# define UART_L lh
+# define UART_S sh
+#elif CONFIG_MIPS_CPS_NS16550_WIDTH == 4
+# define UART_L lw
+# define UART_S sw
+#else
+# define UART_L lb
+# define UART_S sb
+#endif
+
/**
* _mips_cps_putc() - write a character to the UART
* @a0: ASCII character to write
* @t9: UART base address
*/
LEAF(_mips_cps_putc)
-1: lw t0, UART_LSR_OFS(t9)
+1: UART_L t0, UART_LSR_OFS(t9)
andi t0, t0, UART_LSR_TEMT
beqz t0, 1b
- sb a0, UART_TX_OFS(t9)
+ UART_S a0, UART_TX_OFS(t9)
jr ra
END(_mips_cps_putc)
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index f21a2304401f..6b93162d7c5a 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -28,6 +28,8 @@
#include <asm/spram.h>
#include <linux/uaccess.h>
+#include <asm/mach-loongson64/cpucfg-emul.h>
+
/* Hardware capabilities */
unsigned int elf_hwcap __read_mostly;
EXPORT_SYMBOL_GPL(elf_hwcap);
@@ -92,6 +94,7 @@ static void cpu_set_fpu_2008(struct cpuinfo_mips *c)
{
if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+ MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
unsigned long sr, fir, fcsr, fcsr0, fcsr1;
@@ -172,6 +175,7 @@ static void cpu_set_nofpu_2008(struct cpuinfo_mips *c)
case STRICT:
if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+ MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
c->options |= MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY;
} else {
@@ -263,9 +267,11 @@ static void cpu_set_nofpu_id(struct cpuinfo_mips *c)
value = 0;
if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+ MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6))
value |= MIPS_FPIR_D | MIPS_FPIR_S;
if (c->isa_level & (MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+ MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6))
value |= MIPS_FPIR_F64 | MIPS_FPIR_L | MIPS_FPIR_W;
if (c->options & MIPS_CPU_NAN_2008)
@@ -286,6 +292,7 @@ static void cpu_set_fpu_opts(struct cpuinfo_mips *c)
if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+ MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
if (c->fpu_id & MIPS_FPIR_3D)
c->ases |= MIPS_ASE_MIPS3D;
@@ -532,22 +539,26 @@ static inline void cpu_probe_vmbits(struct cpuinfo_mips *c)
static void set_isa(struct cpuinfo_mips *c, unsigned int isa)
{
switch (isa) {
+ case MIPS_CPU_ISA_M64R5:
+ c->isa_level |= MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5;
+ set_elf_base_platform("mips64r5");
+ fallthrough;
case MIPS_CPU_ISA_M64R2:
c->isa_level |= MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2;
set_elf_base_platform("mips64r2");
- /* fall through */
+ fallthrough;
case MIPS_CPU_ISA_M64R1:
c->isa_level |= MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1;
set_elf_base_platform("mips64");
- /* fall through */
+ fallthrough;
case MIPS_CPU_ISA_V:
c->isa_level |= MIPS_CPU_ISA_V;
set_elf_base_platform("mips5");
- /* fall through */
+ fallthrough;
case MIPS_CPU_ISA_IV:
c->isa_level |= MIPS_CPU_ISA_IV;
set_elf_base_platform("mips4");
- /* fall through */
+ fallthrough;
case MIPS_CPU_ISA_III:
c->isa_level |= MIPS_CPU_ISA_II | MIPS_CPU_ISA_III;
set_elf_base_platform("mips3");
@@ -557,20 +568,24 @@ static void set_isa(struct cpuinfo_mips *c, unsigned int isa)
case MIPS_CPU_ISA_M64R6:
c->isa_level |= MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6;
set_elf_base_platform("mips64r6");
- /* fall through */
+ fallthrough;
case MIPS_CPU_ISA_M32R6:
c->isa_level |= MIPS_CPU_ISA_M32R6;
set_elf_base_platform("mips32r6");
/* Break here so we don't add incompatible ISAs */
break;
+ case MIPS_CPU_ISA_M32R5:
+ c->isa_level |= MIPS_CPU_ISA_M32R5;
+ set_elf_base_platform("mips32r5");
+ fallthrough;
case MIPS_CPU_ISA_M32R2:
c->isa_level |= MIPS_CPU_ISA_M32R2;
set_elf_base_platform("mips32r2");
- /* fall through */
+ fallthrough;
case MIPS_CPU_ISA_M32R1:
c->isa_level |= MIPS_CPU_ISA_M32R1;
set_elf_base_platform("mips32");
- /* fall through */
+ fallthrough;
case MIPS_CPU_ISA_II:
c->isa_level |= MIPS_CPU_ISA_II;
set_elf_base_platform("mips2");
@@ -620,14 +635,14 @@ static int set_ftlb_enable(struct cpuinfo_mips *c, enum ftlb_flags flags)
config = read_c0_config6();
if (flags & FTLB_EN)
- config |= MIPS_CONF6_FTLBEN;
+ config |= MIPS_CONF6_MTI_FTLBEN;
else
- config &= ~MIPS_CONF6_FTLBEN;
+ config &= ~MIPS_CONF6_MTI_FTLBEN;
if (flags & FTLB_SET_PROB) {
- config &= ~(3 << MIPS_CONF6_FTLBP_SHIFT);
+ config &= ~(3 << MIPS_CONF6_MTI_FTLBP_SHIFT);
config |= calculate_ftlb_probability(c)
- << MIPS_CONF6_FTLBP_SHIFT;
+ << MIPS_CONF6_MTI_FTLBP_SHIFT;
}
write_c0_config6(config);
@@ -647,10 +662,10 @@ static int set_ftlb_enable(struct cpuinfo_mips *c, enum ftlb_flags flags)
config = read_c0_config6();
if (flags & FTLB_EN)
/* Enable FTLB */
- write_c0_config6(config & ~MIPS_CONF6_FTLBDIS);
+ write_c0_config6(config & ~MIPS_CONF6_LOONGSON_FTLBDIS);
else
/* Disable FTLB */
- write_c0_config6(config | MIPS_CONF6_FTLBDIS);
+ write_c0_config6(config | MIPS_CONF6_LOONGSON_FTLBDIS);
break;
default:
return 1;
@@ -659,6 +674,52 @@ static int set_ftlb_enable(struct cpuinfo_mips *c, enum ftlb_flags flags)
return 0;
}
+static int mm_config(struct cpuinfo_mips *c)
+{
+ unsigned int config0, update, mm;
+
+ config0 = read_c0_config();
+ mm = config0 & MIPS_CONF_MM;
+
+ /*
+ * It's implementation dependent what type of write-merge is supported
+ * and whether it can be enabled/disabled. If it is settable lets make
+ * the merging allowed by default. Some platforms might have
+ * write-through caching unsupported. In this case just ignore the
+ * CP0.Config.MM bit field value.
+ */
+ switch (c->cputype) {
+ case CPU_24K:
+ case CPU_34K:
+ case CPU_74K:
+ case CPU_P5600:
+ case CPU_P6600:
+ c->options |= MIPS_CPU_MM_FULL;
+ update = MIPS_CONF_MM_FULL;
+ break;
+ case CPU_1004K:
+ case CPU_1074K:
+ case CPU_INTERAPTIV:
+ case CPU_PROAPTIV:
+ mm = 0;
+ fallthrough;
+ default:
+ update = 0;
+ break;
+ }
+
+ if (update) {
+ config0 = (config0 & ~MIPS_CONF_MM) | update;
+ write_c0_config(config0);
+ } else if (mm == MIPS_CONF_MM_SYSAD) {
+ c->options |= MIPS_CPU_MM_SYSAD;
+ } else if (mm == MIPS_CONF_MM_FULL) {
+ c->options |= MIPS_CPU_MM_FULL;
+ }
+
+ return 0;
+}
+
static inline unsigned int decode_config0(struct cpuinfo_mips *c)
{
unsigned int config0;
@@ -850,7 +911,7 @@ static inline unsigned int decode_config4(struct cpuinfo_mips *c)
MIPS_CONF4_VTLBSIZEEXT_SHIFT) * 0x40;
c->tlbsize = c->tlbsizevtlb;
ftlb_page = MIPS_CONF4_VFTLBPAGESIZE;
- /* fall through */
+ fallthrough;
case MIPS_CONF4_MMUEXTDEF_FTLBSIZEEXT:
if (mips_ftlb_disabled)
break;
@@ -1750,13 +1811,19 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
spram_config();
+ mm_config(c);
+
switch (__get_cpu_type(c->cputype)) {
+ case CPU_M5150:
+ case CPU_P5600:
+ set_isa(c, MIPS_CPU_ISA_M32R5);
+ break;
case CPU_I6500:
c->options |= MIPS_CPU_SHARED_FTLB_ENTRIES;
- /* fall-through */
+ fallthrough;
case CPU_I6400:
c->options |= MIPS_CPU_SHARED_FTLB_RAM;
- /* fall-through */
+ fallthrough;
default:
break;
}
@@ -1932,10 +1999,53 @@ platform:
}
}
+#ifdef CONFIG_CPU_LOONGSON64
+#include <loongson_regs.h>
+
+static inline void decode_cpucfg(struct cpuinfo_mips *c)
+{
+ u32 cfg1 = read_cpucfg(LOONGSON_CFG1);
+ u32 cfg2 = read_cpucfg(LOONGSON_CFG2);
+ u32 cfg3 = read_cpucfg(LOONGSON_CFG3);
+
+ if (cfg1 & LOONGSON_CFG1_MMI)
+ c->ases |= MIPS_ASE_LOONGSON_MMI;
+
+ if (cfg2 & LOONGSON_CFG2_LEXT1)
+ c->ases |= MIPS_ASE_LOONGSON_EXT;
+
+ if (cfg2 & LOONGSON_CFG2_LEXT2)
+ c->ases |= MIPS_ASE_LOONGSON_EXT2;
+
+ if (cfg2 & LOONGSON_CFG2_LSPW)
+ c->options |= MIPS_CPU_LDPTE;
+
+ if (cfg3 & LOONGSON_CFG3_LCAMP)
+ c->ases |= MIPS_ASE_LOONGSON_CAM;
+}
+
static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
{
+ decode_configs(c);
+
switch (c->processor_id & PRID_IMP_MASK) {
- case PRID_IMP_LOONGSON_64C: /* Loongson-2/3 */
+ case PRID_IMP_LOONGSON_64R: /* Loongson-64 Reduced */
+ switch (c->processor_id & PRID_REV_MASK) {
+ case PRID_REV_LOONGSON2K_R1_0:
+ case PRID_REV_LOONGSON2K_R1_1:
+ case PRID_REV_LOONGSON2K_R1_2:
+ case PRID_REV_LOONGSON2K_R1_3:
+ c->cputype = CPU_LOONGSON64;
+ __cpu_name[cpu] = "Loongson-2K";
+ set_elf_platform(cpu, "gs264e");
+ set_isa(c, MIPS_CPU_ISA_M64R2);
+ break;
+ }
+ c->writecombine = _CACHE_UNCACHED_ACCELERATED;
+ c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_EXT |
+ MIPS_ASE_LOONGSON_EXT2);
+ break;
+ case PRID_IMP_LOONGSON_64C: /* Loongson-3 Classic */
switch (c->processor_id & PRID_REV_MASK) {
case PRID_REV_LOONGSON3A_R2_0:
case PRID_REV_LOONGSON3A_R2_1:
@@ -1952,8 +2062,14 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
set_isa(c, MIPS_CPU_ISA_M64R2);
break;
}
-
- decode_configs(c);
+ /*
+ * Loongson-3 Classic did not implement MIPS standard TLBINV
+ * but implemented TLBINVF and EHINV. As currently we're only
+ * using these two features, enable MIPS_CPU_TLBINV as well.
+ *
+ * Also some early Loongson-3A2000 had wrong TLB type in Config
+ * register, we correct it here.
+ */
c->options |= MIPS_CPU_FTLB | MIPS_CPU_TLBINV | MIPS_CPU_LDPTE;
c->writecombine = _CACHE_UNCACHED_ACCELERATED;
c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM |
@@ -1964,17 +2080,17 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
__cpu_name[cpu] = "ICT Loongson-3";
set_elf_platform(cpu, "loongson3a");
set_isa(c, MIPS_CPU_ISA_M64R2);
- decode_configs(c);
- c->options |= MIPS_CPU_FTLB | MIPS_CPU_TLBINV | MIPS_CPU_LDPTE;
+ decode_cpucfg(c);
c->writecombine = _CACHE_UNCACHED_ACCELERATED;
- c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM |
- MIPS_ASE_LOONGSON_EXT | MIPS_ASE_LOONGSON_EXT2);
break;
default:
panic("Unknown Loongson Processor ID!");
break;
}
}
+#else
+static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu) { }
+#endif
static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
{
@@ -2028,7 +2144,7 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
default:
break;
}
- /* fall-through */
+ fallthrough;
case PRID_IMP_XBURST_REV2:
c->cputype = CPU_XBURST;
c->writecombine = _CACHE_UNCACHED_ACCELERATED;
@@ -2286,6 +2402,13 @@ void cpu_probe(void)
cpu_probe_vmbits(c);
+ /* Synthesize CPUCFG data if running on Loongson processors;
+ * no-op otherwise.
+ *
+ * This looks at previously probed features, so keep this at bottom.
+ */
+ loongson3_cpucfg_synthesize_data(c);
+
#ifdef CONFIG_64BIT
if (cpu == 0)
__ua_limit = ~((1ull << cpu_vmbits) - 1);
diff --git a/arch/mips/kernel/csrc-r4k.c b/arch/mips/kernel/csrc-r4k.c
index 437dda64fd7a..edc4afc080fa 100644
--- a/arch/mips/kernel/csrc-r4k.c
+++ b/arch/mips/kernel/csrc-r4k.c
@@ -6,6 +6,7 @@
* Copyright (C) 2007 by Ralf Baechle
*/
#include <linux/clocksource.h>
+#include <linux/cpufreq.h>
#include <linux/init.h>
#include <linux/sched_clock.h>
@@ -65,6 +66,45 @@ static bool rdhwr_count_usable(void)
return false;
}
+#ifdef CONFIG_CPU_FREQ
+
+static bool __read_mostly r4k_clock_unstable;
+
+static void r4k_clocksource_unstable(char *reason)
+{
+ if (r4k_clock_unstable)
+ return;
+
+ r4k_clock_unstable = true;
+
+ pr_info("R4K timer is unstable due to %s\n", reason);
+
+ clocksource_mark_unstable(&clocksource_mips);
+}
+
+static int r4k_cpufreq_callback(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ if (val == CPUFREQ_POSTCHANGE)
+ r4k_clocksource_unstable("CPU frequency change");
+
+ return 0;
+}
+
+static struct notifier_block r4k_cpufreq_notifier = {
+ .notifier_call = r4k_cpufreq_callback,
+};
+
+static int __init r4k_register_cpufreq_notifier(void)
+{
+ return cpufreq_register_notifier(&r4k_cpufreq_notifier,
+ CPUFREQ_TRANSITION_NOTIFIER);
+
+}
+core_initcall(r4k_register_cpufreq_notifier);
+
+#endif /* !CONFIG_CPU_FREQ */
+
int __init init_r4k_clocksource(void)
{
if (!cpu_has_counter || !mips_hpt_frequency)
diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S
index 4849a48afc0f..4b896f5023ff 100644
--- a/arch/mips/kernel/entry.S
+++ b/arch/mips/kernel/entry.S
@@ -169,8 +169,8 @@ syscall_exit_work:
jal syscall_trace_leave
b resume_userspace
-#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6) || \
- defined(CONFIG_MIPS_MT)
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \
+ defined(CONFIG_CPU_MIPSR6) || defined(CONFIG_MIPS_MT)
/*
* MIPS32R2 Instruction Hazard Barrier - must be called
@@ -183,4 +183,4 @@ LEAF(mips_ihb)
nop
END(mips_ihb)
-#endif /* CONFIG_CPU_MIPSR2 or CONFIG_CPU_MIPSR6 or CONFIG_MIPS_MT */
+#endif /* CONFIG_CPU_MIPSR2 - CONFIG_CPU_MIPSR6 or CONFIG_MIPS_MT */
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index 0a43c9125267..a1b966f3578e 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -476,20 +476,20 @@ NESTED(nmi_handler, PT_SIZE, sp)
.endm
.macro __build_clear_fpe
+ CLI
+ TRACE_IRQS_OFF
.set push
/* gas fails to assemble cfc1 for some archs (octeon).*/ \
.set mips1
SET_HARDFLOAT
cfc1 a1, fcr31
.set pop
- CLI
- TRACE_IRQS_OFF
.endm
.macro __build_clear_msa_fpe
- _cfcmsa a1, MSA_CSR
CLI
TRACE_IRQS_OFF
+ _cfcmsa a1, MSA_CSR
.endm
.macro __build_clear_ade
@@ -501,17 +501,17 @@ NESTED(nmi_handler, PT_SIZE, sp)
.macro __BUILD_silent exception
.endm
- /* Gas tries to parse the PRINT argument as a string containing
+ /* Gas tries to parse the ASM_PRINT argument as a string containing
string escapes and emits bogus warnings if it believes to
recognize an unknown escape code. So make the arguments
start with an n and gas will believe \n is ok ... */
.macro __BUILD_verbose nexception
LONG_L a1, PT_EPC(sp)
#ifdef CONFIG_32BIT
- PRINT("Got \nexception at %08lx\012")
+ ASM_PRINT("Got \nexception at %08lx\012")
#endif
#ifdef CONFIG_64BIT
- PRINT("Got \nexception at %016lx\012")
+ ASM_PRINT("Got \nexception at %016lx\012")
#endif
.endm
diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
index 351d40fe0859..3b02ffe46304 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -132,6 +132,9 @@ dtb_found:
#endif
MTC0 zero, CP0_CONTEXT # clear context register
+#ifdef CONFIG_64BIT
+ MTC0 zero, CP0_XCONTEXT
+#endif
PTR_LA $28, init_thread_union
/* Set the SP after an empty pt_regs. */
PTR_LI sp, _THREAD_SIZE - 32 - PT_SIZE
diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c
index 37f8e78e2869..5bc3b04693c7 100644
--- a/arch/mips/kernel/idle.c
+++ b/arch/mips/kernel/idle.c
@@ -180,7 +180,8 @@ void __init check_wait(void)
break;
case CPU_LOONGSON64:
if ((c->processor_id & (PRID_IMP_MASK | PRID_REV_MASK)) >=
- (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0))
+ (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0) ||
+ (c->processor_id & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R)
cpu_wait = r4k_wait;
break;
@@ -201,7 +202,7 @@ void __init check_wait(void)
*/
if (IS_ENABLED(CONFIG_MIPS_EJTAG_FDC_TTY))
break;
- /* fall through */
+ fallthrough;
case CPU_M14KC:
case CPU_M14KEC:
case CPU_24K:
diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c
index cdb93ed91cde..f60af512c877 100644
--- a/arch/mips/kernel/mips-cm.c
+++ b/arch/mips/kernel/mips-cm.c
@@ -114,14 +114,56 @@ static char *cm2_core[8] = {
"Exclusive/OK", "Exclusive/Data"
};
+static char *cm2_l2_type[4] = {
+ [0x0] = "None",
+ [0x1] = "Tag RAM single/double ECC error",
+ [0x2] = "Data RAM single/double ECC error",
+ [0x3] = "WS RAM uncorrectable dirty parity"
+};
+
+static char *cm2_l2_instr[32] = {
+ [0x00] = "L2_NOP",
+ [0x01] = "L2_ERR_CORR",
+ [0x02] = "L2_TAG_INV",
+ [0x03] = "L2_WS_CLEAN",
+ [0x04] = "L2_RD_MDYFY_WR",
+ [0x05] = "L2_WS_MRU",
+ [0x06] = "L2_EVICT_LN2",
+ [0x07] = "0x07",
+ [0x08] = "L2_EVICT",
+ [0x09] = "L2_REFL",
+ [0x0a] = "L2_RD",
+ [0x0b] = "L2_WR",
+ [0x0c] = "L2_EVICT_MRU",
+ [0x0d] = "L2_SYNC",
+ [0x0e] = "L2_REFL_ERR",
+ [0x0f] = "0x0f",
+ [0x10] = "L2_INDX_WB_INV",
+ [0x11] = "L2_INDX_LD_TAG",
+ [0x12] = "L2_INDX_ST_TAG",
+ [0x13] = "L2_INDX_ST_DATA",
+ [0x14] = "L2_INDX_ST_ECC",
+ [0x15] = "0x15",
+ [0x16] = "0x16",
+ [0x17] = "0x17",
+ [0x18] = "L2_FTCH_AND_LCK",
+ [0x19] = "L2_HIT_INV",
+ [0x1a] = "L2_HIT_WB_INV",
+ [0x1b] = "L2_HIT_WB",
+ [0x1c] = "0x1c",
+ [0x1d] = "0x1d",
+ [0x1e] = "0x1e",
+ [0x1f] = "0x1f"
+};
+
static char *cm2_causes[32] = {
"None", "GC_WR_ERR", "GC_RD_ERR", "COH_WR_ERR",
"COH_RD_ERR", "MMIO_WR_ERR", "MMIO_RD_ERR", "0x07",
"0x08", "0x09", "0x0a", "0x0b",
"0x0c", "0x0d", "0x0e", "0x0f",
- "0x10", "0x11", "0x12", "0x13",
- "0x14", "0x15", "0x16", "INTVN_WR_ERR",
- "INTVN_RD_ERR", "0x19", "0x1a", "0x1b",
+ "0x10", "INTVN_WR_ERR", "INTVN_RD_ERR", "0x13",
+ "0x14", "0x15", "0x16", "0x17",
+ "L2_RD_UNCORR", "L2_WR_UNCORR", "L2_CORR", "0x1b",
"0x1c", "0x1d", "0x1e", "0x1f"
};
@@ -360,7 +402,7 @@ void mips_cm_error_report(void)
"CCA=%lu TR=%s MCmd=%s STag=%lu "
"SPort=%lu\n", cca_bits, cm2_tr[tr_bits],
cm2_cmd[cmd_bits], stag_bits, sport_bits);
- } else {
+ } else if (cause < 24) {
/* glob state & sresp together */
unsigned long c3_bits = (cm_error >> 18) & 7;
unsigned long c2_bits = (cm_error >> 15) & 7;
@@ -377,6 +419,22 @@ void mips_cm_error_report(void)
cm2_core[c1_bits], cm2_core[c0_bits],
sc_bit ? "True" : "False",
cm2_cmd[cmd_bits], sport_bits);
+ } else {
+ unsigned long muc_bit = (cm_error >> 23) & 1;
+ unsigned long ins_bits = (cm_error >> 18) & 0x1f;
+ unsigned long arr_bits = (cm_error >> 16) & 3;
+ unsigned long dw_bits = (cm_error >> 12) & 15;
+ unsigned long way_bits = (cm_error >> 9) & 7;
+ unsigned long mway_bit = (cm_error >> 8) & 1;
+ unsigned long syn_bits = (cm_error >> 0) & 0xFF;
+
+ snprintf(buf, sizeof(buf),
+ "Type=%s%s Instr=%s DW=%lu Way=%lu "
+ "MWay=%s Syndrome=0x%02lx",
+ muc_bit ? "Multi-UC " : "",
+ cm2_l2_type[arr_bits],
+ cm2_l2_instr[ins_bits], dw_bits, way_bits,
+ mway_bit ? "True" : "False", syn_bits);
}
pr_err("CM_ERROR=%08llx %s <%s>\n", cm_error,
cm2_causes[cause], buf);
diff --git a/arch/mips/kernel/mips-r2-to-r6-emul.c b/arch/mips/kernel/mips-r2-to-r6-emul.c
index b4d210bfcdae..a39ec755e4c2 100644
--- a/arch/mips/kernel/mips-r2-to-r6-emul.c
+++ b/arch/mips/kernel/mips-r2-to-r6-emul.c
@@ -1109,7 +1109,7 @@ repeat:
err = SIGILL;
break;
}
- /* fall through */
+ fallthrough;
case beql_op:
case bnel_op:
if (delay_slot(regs)) {
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index 128fc9999c56..efce5defcc5c 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -90,6 +90,7 @@ struct mips_pmu {
unsigned int num_counters;
};
+static int counter_bits;
static struct mips_pmu mipspmu;
#define M_PERFCTL_EVENT(event) (((event) << MIPS_PERFCTRL_EVENT_S) & \
@@ -118,6 +119,7 @@ static struct mips_pmu mipspmu;
#define M_PERFCTL_CONFIG_MASK 0x1f
#endif
+#define CNTR_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
#ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS
static DEFINE_RWLOCK(pmuint_rwlock);
@@ -154,6 +156,31 @@ static void pause_local_counters(void);
static irqreturn_t mipsxx_pmu_handle_irq(int, void *);
static int mipsxx_pmu_handle_shared_irq(void);
+/* 0: Not Loongson-3
+ * 1: Loongson-3A1000/3B1000/3B1500
+ * 2: Loongson-3A2000/3A3000
+ * 3: Loongson-3A4000+
+ */
+
+#define LOONGSON_PMU_TYPE0 0
+#define LOONGSON_PMU_TYPE1 1
+#define LOONGSON_PMU_TYPE2 2
+#define LOONGSON_PMU_TYPE3 3
+
+static inline int get_loongson3_pmu_type(void)
+{
+ if (boot_cpu_type() != CPU_LOONGSON64)
+ return LOONGSON_PMU_TYPE0;
+ if ((boot_cpu_data.processor_id & PRID_COMP_MASK) == PRID_COMP_LEGACY)
+ return LOONGSON_PMU_TYPE1;
+ if ((boot_cpu_data.processor_id & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64C)
+ return LOONGSON_PMU_TYPE2;
+ if ((boot_cpu_data.processor_id & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64G)
+ return LOONGSON_PMU_TYPE3;
+
+ return LOONGSON_PMU_TYPE0;
+}
+
static unsigned int mipsxx_pmu_swizzle_perf_idx(unsigned int idx)
{
if (vpe_id() == 1)
@@ -186,17 +213,18 @@ static u64 mipsxx_pmu_read_counter(unsigned int idx)
static u64 mipsxx_pmu_read_counter_64(unsigned int idx)
{
+ u64 mask = CNTR_BIT_MASK(counter_bits);
idx = mipsxx_pmu_swizzle_perf_idx(idx);
switch (idx) {
case 0:
- return read_c0_perfcntr0_64();
+ return read_c0_perfcntr0_64() & mask;
case 1:
- return read_c0_perfcntr1_64();
+ return read_c0_perfcntr1_64() & mask;
case 2:
- return read_c0_perfcntr2_64();
+ return read_c0_perfcntr2_64() & mask;
case 3:
- return read_c0_perfcntr3_64();
+ return read_c0_perfcntr3_64() & mask;
default:
WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx);
return 0;
@@ -225,6 +253,7 @@ static void mipsxx_pmu_write_counter(unsigned int idx, u64 val)
static void mipsxx_pmu_write_counter_64(unsigned int idx, u64 val)
{
+ val &= CNTR_BIT_MASK(counter_bits);
idx = mipsxx_pmu_swizzle_perf_idx(idx);
switch (idx) {
@@ -286,12 +315,16 @@ static int mipsxx_pmu_alloc_counter(struct cpu_hw_events *cpuc,
struct hw_perf_event *hwc)
{
int i;
+ unsigned long cntr_mask;
/*
* We only need to care the counter mask. The range has been
* checked definitely.
*/
- unsigned long cntr_mask = (hwc->event_base >> 8) & 0xffff;
+ if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2)
+ cntr_mask = (hwc->event_base >> 10) & 0xffff;
+ else
+ cntr_mask = (hwc->event_base >> 8) & 0xffff;
for (i = mipspmu.num_counters - 1; i >= 0; i--) {
/*
@@ -320,10 +353,16 @@ static void mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx)
WARN_ON(idx < 0 || idx >= mipspmu.num_counters);
- cpuc->saved_ctrl[idx] = M_PERFCTL_EVENT(evt->event_base & 0xff) |
- (evt->config_base & M_PERFCTL_CONFIG_MASK) |
- /* Make sure interrupt enabled. */
- MIPS_PERFCTRL_IE;
+ if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2)
+ cpuc->saved_ctrl[idx] = M_PERFCTL_EVENT(evt->event_base & 0x3ff) |
+ (evt->config_base & M_PERFCTL_CONFIG_MASK) |
+ /* Make sure interrupt enabled. */
+ MIPS_PERFCTRL_IE;
+ else
+ cpuc->saved_ctrl[idx] = M_PERFCTL_EVENT(evt->event_base & 0xff) |
+ (evt->config_base & M_PERFCTL_CONFIG_MASK) |
+ /* Make sure interrupt enabled. */
+ MIPS_PERFCTRL_IE;
if (IS_ENABLED(CONFIG_CPU_BMIPS5000)) {
/* enable the counter for the calling thread */
@@ -396,6 +435,10 @@ static int mipspmu_event_set_period(struct perf_event *event,
local64_set(&hwc->prev_count, mipspmu.overflow - left);
+ if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2)
+ mipsxx_pmu_write_control(idx,
+ M_PERFCTL_EVENT(hwc->event_base & 0x3ff));
+
mipspmu.write_counter(idx, mipspmu.overflow - left);
perf_event_update_userpage(event);
@@ -667,8 +710,14 @@ static unsigned int mipspmu_perf_event_encode(const struct mips_perf_event *pev)
(pev->event_id & 0xff);
else
#endif /* CONFIG_MIPS_MT_SMP */
- return ((pev->cntr_mask & 0xffff00) |
- (pev->event_id & 0xff));
+ {
+ if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2)
+ return (pev->cntr_mask & 0xfffc00) |
+ (pev->event_id & 0x3ff);
+ else
+ return (pev->cntr_mask & 0xffff00) |
+ (pev->event_id & 0xff);
+ }
}
static const struct mips_perf_event *mipspmu_map_general_event(int idx)
@@ -783,26 +832,104 @@ static int n_counters(void)
return counters;
}
+static void loongson3_reset_counters(void *arg)
+{
+ int counters = (int)(long)arg;
+
+ switch (counters) {
+ case 4:
+ mipsxx_pmu_write_control(3, 0);
+ mipspmu.write_counter(3, 0);
+ mipsxx_pmu_write_control(3, 127<<5);
+ mipspmu.write_counter(3, 0);
+ mipsxx_pmu_write_control(3, 191<<5);
+ mipspmu.write_counter(3, 0);
+ mipsxx_pmu_write_control(3, 255<<5);
+ mipspmu.write_counter(3, 0);
+ mipsxx_pmu_write_control(3, 319<<5);
+ mipspmu.write_counter(3, 0);
+ mipsxx_pmu_write_control(3, 383<<5);
+ mipspmu.write_counter(3, 0);
+ mipsxx_pmu_write_control(3, 575<<5);
+ mipspmu.write_counter(3, 0);
+ fallthrough;
+ case 3:
+ mipsxx_pmu_write_control(2, 0);
+ mipspmu.write_counter(2, 0);
+ mipsxx_pmu_write_control(2, 127<<5);
+ mipspmu.write_counter(2, 0);
+ mipsxx_pmu_write_control(2, 191<<5);
+ mipspmu.write_counter(2, 0);
+ mipsxx_pmu_write_control(2, 255<<5);
+ mipspmu.write_counter(2, 0);
+ mipsxx_pmu_write_control(2, 319<<5);
+ mipspmu.write_counter(2, 0);
+ mipsxx_pmu_write_control(2, 383<<5);
+ mipspmu.write_counter(2, 0);
+ mipsxx_pmu_write_control(2, 575<<5);
+ mipspmu.write_counter(2, 0);
+ fallthrough;
+ case 2:
+ mipsxx_pmu_write_control(1, 0);
+ mipspmu.write_counter(1, 0);
+ mipsxx_pmu_write_control(1, 127<<5);
+ mipspmu.write_counter(1, 0);
+ mipsxx_pmu_write_control(1, 191<<5);
+ mipspmu.write_counter(1, 0);
+ mipsxx_pmu_write_control(1, 255<<5);
+ mipspmu.write_counter(1, 0);
+ mipsxx_pmu_write_control(1, 319<<5);
+ mipspmu.write_counter(1, 0);
+ mipsxx_pmu_write_control(1, 383<<5);
+ mipspmu.write_counter(1, 0);
+ mipsxx_pmu_write_control(1, 575<<5);
+ mipspmu.write_counter(1, 0);
+ fallthrough;
+ case 1:
+ mipsxx_pmu_write_control(0, 0);
+ mipspmu.write_counter(0, 0);
+ mipsxx_pmu_write_control(0, 127<<5);
+ mipspmu.write_counter(0, 0);
+ mipsxx_pmu_write_control(0, 191<<5);
+ mipspmu.write_counter(0, 0);
+ mipsxx_pmu_write_control(0, 255<<5);
+ mipspmu.write_counter(0, 0);
+ mipsxx_pmu_write_control(0, 319<<5);
+ mipspmu.write_counter(0, 0);
+ mipsxx_pmu_write_control(0, 383<<5);
+ mipspmu.write_counter(0, 0);
+ mipsxx_pmu_write_control(0, 575<<5);
+ mipspmu.write_counter(0, 0);
+ break;
+ }
+}
+
static void reset_counters(void *arg)
{
int counters = (int)(long)arg;
+
+ if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2) {
+ loongson3_reset_counters(arg);
+ return;
+ }
+
switch (counters) {
case 4:
mipsxx_pmu_write_control(3, 0);
mipspmu.write_counter(3, 0);
- /* fall through */
+ fallthrough;
case 3:
mipsxx_pmu_write_control(2, 0);
mipspmu.write_counter(2, 0);
- /* fall through */
+ fallthrough;
case 2:
mipsxx_pmu_write_control(1, 0);
mipspmu.write_counter(1, 0);
- /* fall through */
+ fallthrough;
case 1:
mipsxx_pmu_write_control(0, 0);
mipspmu.write_counter(0, 0);
- /* fall through */
+ break;
}
}
@@ -834,13 +961,30 @@ static const struct mips_perf_event i6x00_event_map[PERF_COUNT_HW_MAX] = {
[PERF_COUNT_HW_BRANCH_MISSES] = { 0x16, CNTR_EVEN | CNTR_ODD },
};
-static const struct mips_perf_event loongson3_event_map[PERF_COUNT_HW_MAX] = {
+static const struct mips_perf_event loongson3_event_map1[PERF_COUNT_HW_MAX] = {
[PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN },
[PERF_COUNT_HW_INSTRUCTIONS] = { 0x00, CNTR_ODD },
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x01, CNTR_EVEN },
[PERF_COUNT_HW_BRANCH_MISSES] = { 0x01, CNTR_ODD },
};
+static const struct mips_perf_event loongson3_event_map2[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = { 0x80, CNTR_ALL },
+ [PERF_COUNT_HW_INSTRUCTIONS] = { 0x81, CNTR_ALL },
+ [PERF_COUNT_HW_CACHE_MISSES] = { 0x18, CNTR_ALL },
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x94, CNTR_ALL },
+ [PERF_COUNT_HW_BRANCH_MISSES] = { 0x9c, CNTR_ALL },
+};
+
+static const struct mips_perf_event loongson3_event_map3[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_ALL },
+ [PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_ALL },
+ [PERF_COUNT_HW_CACHE_REFERENCES] = { 0x1c, CNTR_ALL },
+ [PERF_COUNT_HW_CACHE_MISSES] = { 0x1d, CNTR_ALL },
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x02, CNTR_ALL },
+ [PERF_COUNT_HW_BRANCH_MISSES] = { 0x08, CNTR_ALL },
+};
+
static const struct mips_perf_event octeon_event_map[PERF_COUNT_HW_MAX] = {
[PERF_COUNT_HW_CPU_CYCLES] = { 0x01, CNTR_ALL },
[PERF_COUNT_HW_INSTRUCTIONS] = { 0x03, CNTR_ALL },
@@ -1064,7 +1208,7 @@ static const struct mips_perf_event i6x00_cache_map
},
};
-static const struct mips_perf_event loongson3_cache_map
+static const struct mips_perf_event loongson3_cache_map1
[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
@@ -1109,12 +1253,127 @@ static const struct mips_perf_event loongson3_cache_map
[C(BPU)] = {
/* Using the same code for *HW_BRANCH* */
[C(OP_READ)] = {
- [C(RESULT_ACCESS)] = { 0x02, CNTR_EVEN },
- [C(RESULT_MISS)] = { 0x02, CNTR_ODD },
+ [C(RESULT_ACCESS)] = { 0x01, CNTR_EVEN },
+ [C(RESULT_MISS)] = { 0x01, CNTR_ODD },
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = { 0x01, CNTR_EVEN },
+ [C(RESULT_MISS)] = { 0x01, CNTR_ODD },
+ },
+},
+};
+
+static const struct mips_perf_event loongson3_cache_map2
+ [PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+[C(L1D)] = {
+ /*
+ * Like some other architectures (e.g. ARM), the performance
+ * counters don't differentiate between read and write
+ * accesses/misses, so this isn't strictly correct, but it's the
+ * best we can do. Writes and reads get combined.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { 0x156, CNTR_ALL },
},
[C(OP_WRITE)] = {
- [C(RESULT_ACCESS)] = { 0x02, CNTR_EVEN },
- [C(RESULT_MISS)] = { 0x02, CNTR_ODD },
+ [C(RESULT_ACCESS)] = { 0x155, CNTR_ALL },
+ [C(RESULT_MISS)] = { 0x153, CNTR_ALL },
+ },
+},
+[C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_MISS)] = { 0x18, CNTR_ALL },
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_MISS)] = { 0x18, CNTR_ALL },
+ },
+},
+[C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { 0x1b6, CNTR_ALL },
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = { 0x1b7, CNTR_ALL },
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = { 0x1bf, CNTR_ALL },
+ },
+},
+[C(DTLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_MISS)] = { 0x92, CNTR_ALL },
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_MISS)] = { 0x92, CNTR_ALL },
+ },
+},
+[C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_MISS)] = { 0x1a, CNTR_ALL },
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_MISS)] = { 0x1a, CNTR_ALL },
+ },
+},
+[C(BPU)] = {
+ /* Using the same code for *HW_BRANCH* */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { 0x94, CNTR_ALL },
+ [C(RESULT_MISS)] = { 0x9c, CNTR_ALL },
+ },
+},
+};
+
+static const struct mips_perf_event loongson3_cache_map3
+ [PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+[C(L1D)] = {
+ /*
+ * Like some other architectures (e.g. ARM), the performance
+ * counters don't differentiate between read and write
+ * accesses/misses, so this isn't strictly correct, but it's the
+ * best we can do. Writes and reads get combined.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { 0x1e, CNTR_ALL },
+ [C(RESULT_MISS)] = { 0x1f, CNTR_ALL },
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = { 0xaa, CNTR_ALL },
+ [C(RESULT_MISS)] = { 0xa9, CNTR_ALL },
+ },
+},
+[C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { 0x1c, CNTR_ALL },
+ [C(RESULT_MISS)] = { 0x1d, CNTR_ALL },
+ },
+},
+[C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { 0x2e, CNTR_ALL },
+ [C(RESULT_MISS)] = { 0x2f, CNTR_ALL },
+ },
+},
+[C(DTLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { 0x14, CNTR_ALL },
+ [C(RESULT_MISS)] = { 0x1b, CNTR_ALL },
+ },
+},
+[C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_MISS)] = { 0x1a, CNTR_ALL },
+ },
+},
+[C(BPU)] = {
+ /* Using the same code for *HW_BRANCH* */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { 0x02, CNTR_ALL },
+ [C(RESULT_MISS)] = { 0x08, CNTR_ALL },
},
},
};
@@ -1178,7 +1437,6 @@ static const struct mips_perf_event bmips5000_cache_map
},
};
-
static const struct mips_perf_event octeon_cache_map
[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
@@ -1512,6 +1770,7 @@ static irqreturn_t mipsxx_pmu_handle_irq(int irq, void *dev)
static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config)
{
/* currently most cores have 7-bit event numbers */
+ int pmu_type;
unsigned int raw_id = config & 0xff;
unsigned int base_id = raw_id & 0x7f;
@@ -1624,8 +1883,33 @@ static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config)
raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
break;
case CPU_LOONGSON64:
- raw_event.cntr_mask = raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
- break;
+ pmu_type = get_loongson3_pmu_type();
+
+ switch (pmu_type) {
+ case LOONGSON_PMU_TYPE1:
+ raw_event.cntr_mask =
+ raw_id > 127 ? CNTR_ODD : CNTR_EVEN;
+ break;
+ case LOONGSON_PMU_TYPE2:
+ base_id = config & 0x3ff;
+ raw_event.cntr_mask = CNTR_ALL;
+
+ if ((base_id >= 1 && base_id < 28) ||
+ (base_id >= 64 && base_id < 90) ||
+ (base_id >= 128 && base_id < 164) ||
+ (base_id >= 192 && base_id < 200) ||
+ (base_id >= 256 && base_id < 274) ||
+ (base_id >= 320 && base_id < 358) ||
+ (base_id >= 384 && base_id < 574))
+ break;
+
+ return ERR_PTR(-EOPNOTSUPP);
+ case LOONGSON_PMU_TYPE3:
+ base_id = raw_id;
+ raw_event.cntr_mask = CNTR_ALL;
+ break;
+ }
+ break;
}
raw_event.event_id = base_id;
@@ -1683,8 +1967,7 @@ static const struct mips_perf_event *xlp_pmu_map_raw_event(u64 config)
static int __init
init_hw_perf_events(void)
{
- int counters, irq;
- int counter_bits;
+ int counters, irq, pmu_type;
pr_info("Performance counters: ");
@@ -1771,8 +2054,25 @@ init_hw_perf_events(void)
break;
case CPU_LOONGSON64:
mipspmu.name = "mips/loongson3";
- mipspmu.general_event_map = &loongson3_event_map;
- mipspmu.cache_event_map = &loongson3_cache_map;
+ pmu_type = get_loongson3_pmu_type();
+
+ switch (pmu_type) {
+ case LOONGSON_PMU_TYPE1:
+ counters = 2;
+ mipspmu.general_event_map = &loongson3_event_map1;
+ mipspmu.cache_event_map = &loongson3_cache_map1;
+ break;
+ case LOONGSON_PMU_TYPE2:
+ counters = 4;
+ mipspmu.general_event_map = &loongson3_event_map2;
+ mipspmu.cache_event_map = &loongson3_cache_map2;
+ break;
+ case LOONGSON_PMU_TYPE3:
+ counters = 4;
+ mipspmu.general_event_map = &loongson3_event_map3;
+ mipspmu.cache_event_map = &loongson3_cache_map3;
+ break;
+ }
break;
case CPU_CAVIUM_OCTEON:
case CPU_CAVIUM_OCTEON_PLUS:
@@ -1803,19 +2103,26 @@ init_hw_perf_events(void)
mipspmu.irq = irq;
if (read_c0_perfctrl0() & MIPS_PERFCTRL_W) {
- mipspmu.max_period = (1ULL << 63) - 1;
- mipspmu.valid_count = (1ULL << 63) - 1;
- mipspmu.overflow = 1ULL << 63;
+ if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2) {
+ counter_bits = 48;
+ mipspmu.max_period = (1ULL << 47) - 1;
+ mipspmu.valid_count = (1ULL << 47) - 1;
+ mipspmu.overflow = 1ULL << 47;
+ } else {
+ counter_bits = 64;
+ mipspmu.max_period = (1ULL << 63) - 1;
+ mipspmu.valid_count = (1ULL << 63) - 1;
+ mipspmu.overflow = 1ULL << 63;
+ }
mipspmu.read_counter = mipsxx_pmu_read_counter_64;
mipspmu.write_counter = mipsxx_pmu_write_counter_64;
- counter_bits = 64;
} else {
+ counter_bits = 32;
mipspmu.max_period = (1ULL << 31) - 1;
mipspmu.valid_count = (1ULL << 31) - 1;
mipspmu.overflow = 1ULL << 31;
mipspmu.read_counter = mipsxx_pmu_read_counter;
mipspmu.write_counter = mipsxx_pmu_write_counter;
- counter_bits = 32;
}
on_each_cpu(reset_counters, (void *)(long)counters, 1);
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index f8d36710cd58..4184d641f05e 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -98,12 +98,16 @@ static int show_cpuinfo(struct seq_file *m, void *v)
seq_printf(m, "%s", " mips32r1");
if (cpu_has_mips32r2)
seq_printf(m, "%s", " mips32r2");
+ if (cpu_has_mips32r5)
+ seq_printf(m, "%s", " mips32r5");
if (cpu_has_mips32r6)
seq_printf(m, "%s", " mips32r6");
if (cpu_has_mips64r1)
seq_printf(m, "%s", " mips64r1");
if (cpu_has_mips64r2)
seq_printf(m, "%s", " mips64r2");
+ if (cpu_has_mips64r5)
+ seq_printf(m, "%s", " mips64r5");
if (cpu_has_mips64r6)
seq_printf(m, "%s", " mips64r6");
seq_printf(m, "\n");
diff --git a/arch/mips/kernel/r4k_fpu.S b/arch/mips/kernel/r4k_fpu.S
index 59be5c812aa2..b91e91106475 100644
--- a/arch/mips/kernel/r4k_fpu.S
+++ b/arch/mips/kernel/r4k_fpu.S
@@ -41,7 +41,7 @@
LEAF(_save_fp)
EXPORT_SYMBOL(_save_fp)
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
- defined(CONFIG_CPU_MIPSR6)
+ defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6)
mfc0 t0, CP0_STATUS
#endif
fpu_save_double a0 t0 t1 # clobbers t1
@@ -53,7 +53,7 @@ EXPORT_SYMBOL(_save_fp)
*/
LEAF(_restore_fp)
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
- defined(CONFIG_CPU_MIPSR6)
+ defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6)
mfc0 t0, CP0_STATUS
#endif
fpu_restore_double a0 t0 t1 # clobbers t1
@@ -103,10 +103,10 @@ LEAF(_save_fp_context)
.set pop
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
- defined(CONFIG_CPU_MIPSR6)
+ defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6)
.set push
SET_HARDFLOAT
-#ifdef CONFIG_CPU_MIPSR2
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5)
.set mips32r2
.set fp=64
mfc0 t0, CP0_STATUS
@@ -170,11 +170,11 @@ LEAF(_save_fp_context)
LEAF(_restore_fp_context)
EX lw t1, 0(a1)
-#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
- defined(CONFIG_CPU_MIPSR6)
+#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
+ defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6)
.set push
SET_HARDFLOAT
-#ifdef CONFIG_CPU_MIPSR2
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5)
.set mips32r2
.set fp=64
mfc0 t0, CP0_STATUS
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 41df8221bb8f..50c9a57e0d3a 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -41,7 +41,7 @@ NESTED(handle_sys, PT_SIZE, sp)
#if 0
SAVE_ALL
move a1, v0
- PRINT("Scall %ld\n")
+ ASM_PRINT("Scall %ld\n")
RESTORE_ALL
#endif
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 10bef8f78e7c..7b537fa2035d 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -575,7 +575,7 @@ static int __init bootcmdline_scan_chosen(unsigned long node, const char *uname,
#endif /* CONFIG_OF_EARLY_FLATTREE */
-static void __init bootcmdline_init(char **cmdline_p)
+static void __init bootcmdline_init(void)
{
bool dt_bootargs = false;
@@ -654,13 +654,11 @@ static void __init bootcmdline_init(char **cmdline_p)
*/
static void __init arch_mem_init(char **cmdline_p)
{
- extern void plat_mem_setup(void);
-
/* call board setup routine */
plat_mem_setup();
memblock_set_bottom_up(true);
- bootcmdline_init(cmdline_p);
+ bootcmdline_init();
strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
*cmdline_p = command_line;
@@ -702,7 +700,17 @@ static void __init arch_mem_init(char **cmdline_p)
memblock_reserve(crashk_res.start, resource_size(&crashk_res));
#endif
device_tree_init();
+
+ /*
+ * In order to reduce the possibility of kernel panic when failed to
+ * get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate
+ * low memory as small as possible before plat_swiotlb_setup(), so
+ * make sparse_init() using top-down allocation.
+ */
+ memblock_set_bottom_up(false);
sparse_init();
+ memblock_set_bottom_up(true);
+
plat_swiotlb_setup();
dma_contiguous_reserve(PFN_PHYS(max_low_pfn));
@@ -831,7 +839,7 @@ arch_initcall(debugfs_mips);
/* User defined DMA coherency from command line. */
enum coherent_io_user_state coherentio = IO_COHERENCE_DEFAULT;
EXPORT_SYMBOL_GPL(coherentio);
-int hw_coherentio = 0; /* Actual hardware supported DMA coherency setting. */
+int hw_coherentio; /* Actual hardware supported DMA coherency setting. */
static int __init setcoherentio(char *str)
{
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index f6efabcb4e92..a0262729cd4c 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -52,7 +52,7 @@ struct sigframe {
/* Matches struct ucontext from its uc_mcontext field onwards */
struct sigcontext sf_sc;
sigset_t sf_mask;
- unsigned long long sf_extcontext[0];
+ unsigned long long sf_extcontext[];
};
struct rt_sigframe {
@@ -824,7 +824,7 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
regs->regs[2] = EINTR;
break;
}
- /* fallthrough */
+ fallthrough;
case ERESTARTNOINTR:
regs->regs[7] = regs->regs[26];
regs->regs[2] = regs->regs[0];
diff --git a/arch/mips/kernel/spram.c b/arch/mips/kernel/spram.c
index 26d355462ace..d5d96214cce5 100644
--- a/arch/mips/kernel/spram.c
+++ b/arch/mips/kernel/spram.c
@@ -209,11 +209,11 @@ void spram_config(void)
case CPU_P6600:
config0 = read_c0_config();
/* FIXME: addresses are Malta specific */
- if (config0 & (1<<24)) {
+ if (config0 & MIPS_CONF_ISP) {
probe_spram("ISPRAM", 0x1c000000,
&ispram_load_tag, &ispram_store_tag);
}
- if (config0 & (1<<23))
+ if (config0 & MIPS_CONF_DSP)
probe_spram("DSPRAM", 0x1c100000,
&dspram_load_tag, &dspram_store_tag);
}
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 37e9413a393d..caa01457dce6 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -18,12 +18,82 @@
#include <linux/smp.h>
#include <linux/spinlock.h>
#include <linux/export.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
#include <asm/cpu-features.h>
#include <asm/cpu-type.h>
#include <asm/div64.h>
#include <asm/time.h>
+#ifdef CONFIG_CPU_FREQ
+
+static DEFINE_PER_CPU(unsigned long, pcp_lpj_ref);
+static DEFINE_PER_CPU(unsigned long, pcp_lpj_ref_freq);
+static unsigned long glb_lpj_ref;
+static unsigned long glb_lpj_ref_freq;
+
+static int cpufreq_callback(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct cpufreq_freqs *freq = data;
+ struct cpumask *cpus = freq->policy->cpus;
+ unsigned long lpj;
+ int cpu;
+
+ /*
+ * Skip lpj numbers adjustment if the CPU-freq transition is safe for
+ * the loops delay. (Is this possible?)
+ */
+ if (freq->flags & CPUFREQ_CONST_LOOPS)
+ return NOTIFY_OK;
+
+ /* Save the initial values of the lpjes for future scaling. */
+ if (!glb_lpj_ref) {
+ glb_lpj_ref = boot_cpu_data.udelay_val;
+ glb_lpj_ref_freq = freq->old;
+
+ for_each_online_cpu(cpu) {
+ per_cpu(pcp_lpj_ref, cpu) =
+ cpu_data[cpu].udelay_val;
+ per_cpu(pcp_lpj_ref_freq, cpu) = freq->old;
+ }
+ }
+
+ /*
+ * Adjust global lpj variable and per-CPU udelay_val number in
+ * accordance with the new CPU frequency.
+ */
+ if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) ||
+ (val == CPUFREQ_POSTCHANGE && freq->old > freq->new)) {
+ loops_per_jiffy = cpufreq_scale(glb_lpj_ref,
+ glb_lpj_ref_freq,
+ freq->new);
+
+ for_each_cpu(cpu, cpus) {
+ lpj = cpufreq_scale(per_cpu(pcp_lpj_ref, cpu),
+ per_cpu(pcp_lpj_ref_freq, cpu),
+ freq->new);
+ cpu_data[cpu].udelay_val = (unsigned int)lpj;
+ }
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block cpufreq_notifier = {
+ .notifier_call = cpufreq_callback,
+};
+
+static int __init register_cpufreq_notifier(void)
+{
+ return cpufreq_register_notifier(&cpufreq_notifier,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+core_initcall(register_cpufreq_notifier);
+
+#endif /* CONFIG_CPU_FREQ */
+
/*
* forward reference
*/
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 31968cbd6464..22f805a73921 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -71,6 +71,8 @@
#include <asm/tlbex.h>
#include <asm/uasm.h>
+#include <asm/mach-loongson64/cpucfg-emul.h>
+
extern void check_wait(void);
extern asmlinkage void rollback_handle_int(void);
extern asmlinkage void handle_int(void);
@@ -693,6 +695,48 @@ static int simulate_sync(struct pt_regs *regs, unsigned int opcode)
return -1; /* Must be something else ... */
}
+/*
+ * Loongson-3 CSR instructions emulation
+ */
+
+#ifdef CONFIG_CPU_LOONGSON3_CPUCFG_EMULATION
+
+#define LWC2 0xc8000000
+#define RS BASE
+#define CSR_OPCODE2 0x00000118
+#define CSR_OPCODE2_MASK 0x000007ff
+#define CSR_FUNC_MASK RT
+#define CSR_FUNC_CPUCFG 0x8
+
+static int simulate_loongson3_cpucfg(struct pt_regs *regs,
+ unsigned int opcode)
+{
+ int op = opcode & OPCODE;
+ int op2 = opcode & CSR_OPCODE2_MASK;
+ int csr_func = (opcode & CSR_FUNC_MASK) >> 16;
+
+ if (op == LWC2 && op2 == CSR_OPCODE2 && csr_func == CSR_FUNC_CPUCFG) {
+ int rd = (opcode & RD) >> 11;
+ int rs = (opcode & RS) >> 21;
+ __u64 sel = regs->regs[rs];
+
+ perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, 0);
+
+ /* Do not emulate on unsupported core models. */
+ if (!loongson3_cpucfg_emulation_enabled(&current_cpu_data))
+ return -1;
+
+ regs->regs[rd] = loongson3_cpucfg_read_synthesized(
+ &current_cpu_data, sel);
+
+ return 0;
+ }
+
+ /* Not ours. */
+ return -1;
+}
+#endif /* CONFIG_CPU_LOONGSON3_CPUCFG_EMULATION */
+
asmlinkage void do_ov(struct pt_regs *regs)
{
enum ctx_state prev_state;
@@ -1166,6 +1210,11 @@ no_r2_instr:
if (status < 0)
status = simulate_fp(regs, opcode, old_epc, old31);
+
+#ifdef CONFIG_CPU_LOONGSON3_CPUCFG_EMULATION
+ if (status < 0)
+ status = simulate_loongson3_cpucfg(regs, opcode);
+#endif
} else if (cpu_has_mmips) {
unsigned short mmop[2] = { 0 };
@@ -1401,8 +1450,7 @@ asmlinkage void do_cpu(struct pt_regs *regs)
force_sig(SIGILL);
break;
}
- /* Fall through. */
-
+ fallthrough;
case 1: {
void __user *fault_addr;
unsigned long fcr31;
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index ca6fc4762d97..0adce604fa44 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -89,12 +89,10 @@
#include <asm/fpu.h>
#include <asm/fpu_emulator.h>
#include <asm/inst.h>
+#include <asm/unaligned-emul.h>
#include <asm/mmu_context.h>
#include <linux/uaccess.h>
-#define STR(x) __STR(x)
-#define __STR(x) #x
-
enum {
UNALIGNED_ACTION_QUIET,
UNALIGNED_ACTION_SIGNAL,
@@ -108,778 +106,6 @@ static u32 unaligned_action;
#endif
extern void show_registers(struct pt_regs *regs);
-#ifdef __BIG_ENDIAN
-#define _LoadHW(addr, value, res, type) \
-do { \
- __asm__ __volatile__ (".set\tnoat\n" \
- "1:\t"type##_lb("%0", "0(%2)")"\n" \
- "2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
- "sll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "li\t%1, 0\n" \
- "3:\t.set\tat\n\t" \
- ".insn\n\t" \
- ".section\t.fixup,\"ax\"\n\t" \
- "4:\tli\t%1, %3\n\t" \
- "j\t3b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 4b\n\t" \
- STR(PTR)"\t2b, 4b\n\t" \
- ".previous" \
- : "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT)); \
-} while(0)
-
-#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
-#define _LoadW(addr, value, res, type) \
-do { \
- __asm__ __volatile__ ( \
- "1:\t"type##_lwl("%0", "(%2)")"\n" \
- "2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
- "li\t%1, 0\n" \
- "3:\n\t" \
- ".insn\n\t" \
- ".section\t.fixup,\"ax\"\n\t" \
- "4:\tli\t%1, %3\n\t" \
- "j\t3b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 4b\n\t" \
- STR(PTR)"\t2b, 4b\n\t" \
- ".previous" \
- : "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT)); \
-} while(0)
-
-#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
-/* For CPUs without lwl instruction */
-#define _LoadW(addr, value, res, type) \
-do { \
- __asm__ __volatile__ ( \
- ".set\tpush\n" \
- ".set\tnoat\n\t" \
- "1:"type##_lb("%0", "0(%2)")"\n\t" \
- "2:"type##_lbu("$1", "1(%2)")"\n\t" \
- "sll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "3:"type##_lbu("$1", "2(%2)")"\n\t" \
- "sll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "4:"type##_lbu("$1", "3(%2)")"\n\t" \
- "sll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "li\t%1, 0\n" \
- ".set\tpop\n" \
- "10:\n\t" \
- ".insn\n\t" \
- ".section\t.fixup,\"ax\"\n\t" \
- "11:\tli\t%1, %3\n\t" \
- "j\t10b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 11b\n\t" \
- STR(PTR)"\t2b, 11b\n\t" \
- STR(PTR)"\t3b, 11b\n\t" \
- STR(PTR)"\t4b, 11b\n\t" \
- ".previous" \
- : "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT)); \
-} while(0)
-
-#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
-
-#define _LoadHWU(addr, value, res, type) \
-do { \
- __asm__ __volatile__ ( \
- ".set\tnoat\n" \
- "1:\t"type##_lbu("%0", "0(%2)")"\n" \
- "2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
- "sll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "li\t%1, 0\n" \
- "3:\n\t" \
- ".insn\n\t" \
- ".set\tat\n\t" \
- ".section\t.fixup,\"ax\"\n\t" \
- "4:\tli\t%1, %3\n\t" \
- "j\t3b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 4b\n\t" \
- STR(PTR)"\t2b, 4b\n\t" \
- ".previous" \
- : "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT)); \
-} while(0)
-
-#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
-#define _LoadWU(addr, value, res, type) \
-do { \
- __asm__ __volatile__ ( \
- "1:\t"type##_lwl("%0", "(%2)")"\n" \
- "2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
- "dsll\t%0, %0, 32\n\t" \
- "dsrl\t%0, %0, 32\n\t" \
- "li\t%1, 0\n" \
- "3:\n\t" \
- ".insn\n\t" \
- "\t.section\t.fixup,\"ax\"\n\t" \
- "4:\tli\t%1, %3\n\t" \
- "j\t3b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 4b\n\t" \
- STR(PTR)"\t2b, 4b\n\t" \
- ".previous" \
- : "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT)); \
-} while(0)
-
-#define _LoadDW(addr, value, res) \
-do { \
- __asm__ __volatile__ ( \
- "1:\tldl\t%0, (%2)\n" \
- "2:\tldr\t%0, 7(%2)\n\t" \
- "li\t%1, 0\n" \
- "3:\n\t" \
- ".insn\n\t" \
- "\t.section\t.fixup,\"ax\"\n\t" \
- "4:\tli\t%1, %3\n\t" \
- "j\t3b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 4b\n\t" \
- STR(PTR)"\t2b, 4b\n\t" \
- ".previous" \
- : "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT)); \
-} while(0)
-
-#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
-/* For CPUs without lwl and ldl instructions */
-#define _LoadWU(addr, value, res, type) \
-do { \
- __asm__ __volatile__ ( \
- ".set\tpush\n\t" \
- ".set\tnoat\n\t" \
- "1:"type##_lbu("%0", "0(%2)")"\n\t" \
- "2:"type##_lbu("$1", "1(%2)")"\n\t" \
- "sll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "3:"type##_lbu("$1", "2(%2)")"\n\t" \
- "sll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "4:"type##_lbu("$1", "3(%2)")"\n\t" \
- "sll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "li\t%1, 0\n" \
- ".set\tpop\n" \
- "10:\n\t" \
- ".insn\n\t" \
- ".section\t.fixup,\"ax\"\n\t" \
- "11:\tli\t%1, %3\n\t" \
- "j\t10b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 11b\n\t" \
- STR(PTR)"\t2b, 11b\n\t" \
- STR(PTR)"\t3b, 11b\n\t" \
- STR(PTR)"\t4b, 11b\n\t" \
- ".previous" \
- : "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT)); \
-} while(0)
-
-#define _LoadDW(addr, value, res) \
-do { \
- __asm__ __volatile__ ( \
- ".set\tpush\n\t" \
- ".set\tnoat\n\t" \
- "1:lb\t%0, 0(%2)\n\t" \
- "2:lbu\t $1, 1(%2)\n\t" \
- "dsll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "3:lbu\t$1, 2(%2)\n\t" \
- "dsll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "4:lbu\t$1, 3(%2)\n\t" \
- "dsll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "5:lbu\t$1, 4(%2)\n\t" \
- "dsll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "6:lbu\t$1, 5(%2)\n\t" \
- "dsll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "7:lbu\t$1, 6(%2)\n\t" \
- "dsll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "8:lbu\t$1, 7(%2)\n\t" \
- "dsll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "li\t%1, 0\n" \
- ".set\tpop\n\t" \
- "10:\n\t" \
- ".insn\n\t" \
- ".section\t.fixup,\"ax\"\n\t" \
- "11:\tli\t%1, %3\n\t" \
- "j\t10b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 11b\n\t" \
- STR(PTR)"\t2b, 11b\n\t" \
- STR(PTR)"\t3b, 11b\n\t" \
- STR(PTR)"\t4b, 11b\n\t" \
- STR(PTR)"\t5b, 11b\n\t" \
- STR(PTR)"\t6b, 11b\n\t" \
- STR(PTR)"\t7b, 11b\n\t" \
- STR(PTR)"\t8b, 11b\n\t" \
- ".previous" \
- : "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT)); \
-} while(0)
-
-#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
-
-
-#define _StoreHW(addr, value, res, type) \
-do { \
- __asm__ __volatile__ ( \
- ".set\tnoat\n" \
- "1:\t"type##_sb("%1", "1(%2)")"\n" \
- "srl\t$1, %1, 0x8\n" \
- "2:\t"type##_sb("$1", "0(%2)")"\n" \
- ".set\tat\n\t" \
- "li\t%0, 0\n" \
- "3:\n\t" \
- ".insn\n\t" \
- ".section\t.fixup,\"ax\"\n\t" \
- "4:\tli\t%0, %3\n\t" \
- "j\t3b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 4b\n\t" \
- STR(PTR)"\t2b, 4b\n\t" \
- ".previous" \
- : "=r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT));\
-} while(0)
-
-#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
-#define _StoreW(addr, value, res, type) \
-do { \
- __asm__ __volatile__ ( \
- "1:\t"type##_swl("%1", "(%2)")"\n" \
- "2:\t"type##_swr("%1", "3(%2)")"\n\t"\
- "li\t%0, 0\n" \
- "3:\n\t" \
- ".insn\n\t" \
- ".section\t.fixup,\"ax\"\n\t" \
- "4:\tli\t%0, %3\n\t" \
- "j\t3b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 4b\n\t" \
- STR(PTR)"\t2b, 4b\n\t" \
- ".previous" \
- : "=r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT)); \
-} while(0)
-
-#define _StoreDW(addr, value, res) \
-do { \
- __asm__ __volatile__ ( \
- "1:\tsdl\t%1,(%2)\n" \
- "2:\tsdr\t%1, 7(%2)\n\t" \
- "li\t%0, 0\n" \
- "3:\n\t" \
- ".insn\n\t" \
- ".section\t.fixup,\"ax\"\n\t" \
- "4:\tli\t%0, %3\n\t" \
- "j\t3b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 4b\n\t" \
- STR(PTR)"\t2b, 4b\n\t" \
- ".previous" \
- : "=r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT)); \
-} while(0)
-
-#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
-#define _StoreW(addr, value, res, type) \
-do { \
- __asm__ __volatile__ ( \
- ".set\tpush\n\t" \
- ".set\tnoat\n\t" \
- "1:"type##_sb("%1", "3(%2)")"\n\t" \
- "srl\t$1, %1, 0x8\n\t" \
- "2:"type##_sb("$1", "2(%2)")"\n\t" \
- "srl\t$1, $1, 0x8\n\t" \
- "3:"type##_sb("$1", "1(%2)")"\n\t" \
- "srl\t$1, $1, 0x8\n\t" \
- "4:"type##_sb("$1", "0(%2)")"\n\t" \
- ".set\tpop\n\t" \
- "li\t%0, 0\n" \
- "10:\n\t" \
- ".insn\n\t" \
- ".section\t.fixup,\"ax\"\n\t" \
- "11:\tli\t%0, %3\n\t" \
- "j\t10b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 11b\n\t" \
- STR(PTR)"\t2b, 11b\n\t" \
- STR(PTR)"\t3b, 11b\n\t" \
- STR(PTR)"\t4b, 11b\n\t" \
- ".previous" \
- : "=&r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT) \
- : "memory"); \
-} while(0)
-
-#define _StoreDW(addr, value, res) \
-do { \
- __asm__ __volatile__ ( \
- ".set\tpush\n\t" \
- ".set\tnoat\n\t" \
- "1:sb\t%1, 7(%2)\n\t" \
- "dsrl\t$1, %1, 0x8\n\t" \
- "2:sb\t$1, 6(%2)\n\t" \
- "dsrl\t$1, $1, 0x8\n\t" \
- "3:sb\t$1, 5(%2)\n\t" \
- "dsrl\t$1, $1, 0x8\n\t" \
- "4:sb\t$1, 4(%2)\n\t" \
- "dsrl\t$1, $1, 0x8\n\t" \
- "5:sb\t$1, 3(%2)\n\t" \
- "dsrl\t$1, $1, 0x8\n\t" \
- "6:sb\t$1, 2(%2)\n\t" \
- "dsrl\t$1, $1, 0x8\n\t" \
- "7:sb\t$1, 1(%2)\n\t" \
- "dsrl\t$1, $1, 0x8\n\t" \
- "8:sb\t$1, 0(%2)\n\t" \
- "dsrl\t$1, $1, 0x8\n\t" \
- ".set\tpop\n\t" \
- "li\t%0, 0\n" \
- "10:\n\t" \
- ".insn\n\t" \
- ".section\t.fixup,\"ax\"\n\t" \
- "11:\tli\t%0, %3\n\t" \
- "j\t10b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 11b\n\t" \
- STR(PTR)"\t2b, 11b\n\t" \
- STR(PTR)"\t3b, 11b\n\t" \
- STR(PTR)"\t4b, 11b\n\t" \
- STR(PTR)"\t5b, 11b\n\t" \
- STR(PTR)"\t6b, 11b\n\t" \
- STR(PTR)"\t7b, 11b\n\t" \
- STR(PTR)"\t8b, 11b\n\t" \
- ".previous" \
- : "=&r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT) \
- : "memory"); \
-} while(0)
-
-#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
-
-#else /* __BIG_ENDIAN */
-
-#define _LoadHW(addr, value, res, type) \
-do { \
- __asm__ __volatile__ (".set\tnoat\n" \
- "1:\t"type##_lb("%0", "1(%2)")"\n" \
- "2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
- "sll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "li\t%1, 0\n" \
- "3:\t.set\tat\n\t" \
- ".insn\n\t" \
- ".section\t.fixup,\"ax\"\n\t" \
- "4:\tli\t%1, %3\n\t" \
- "j\t3b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 4b\n\t" \
- STR(PTR)"\t2b, 4b\n\t" \
- ".previous" \
- : "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT)); \
-} while(0)
-
-#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
-#define _LoadW(addr, value, res, type) \
-do { \
- __asm__ __volatile__ ( \
- "1:\t"type##_lwl("%0", "3(%2)")"\n" \
- "2:\t"type##_lwr("%0", "(%2)")"\n\t"\
- "li\t%1, 0\n" \
- "3:\n\t" \
- ".insn\n\t" \
- ".section\t.fixup,\"ax\"\n\t" \
- "4:\tli\t%1, %3\n\t" \
- "j\t3b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 4b\n\t" \
- STR(PTR)"\t2b, 4b\n\t" \
- ".previous" \
- : "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT)); \
-} while(0)
-
-#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
-/* For CPUs without lwl instruction */
-#define _LoadW(addr, value, res, type) \
-do { \
- __asm__ __volatile__ ( \
- ".set\tpush\n" \
- ".set\tnoat\n\t" \
- "1:"type##_lb("%0", "3(%2)")"\n\t" \
- "2:"type##_lbu("$1", "2(%2)")"\n\t" \
- "sll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "3:"type##_lbu("$1", "1(%2)")"\n\t" \
- "sll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "4:"type##_lbu("$1", "0(%2)")"\n\t" \
- "sll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "li\t%1, 0\n" \
- ".set\tpop\n" \
- "10:\n\t" \
- ".insn\n\t" \
- ".section\t.fixup,\"ax\"\n\t" \
- "11:\tli\t%1, %3\n\t" \
- "j\t10b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 11b\n\t" \
- STR(PTR)"\t2b, 11b\n\t" \
- STR(PTR)"\t3b, 11b\n\t" \
- STR(PTR)"\t4b, 11b\n\t" \
- ".previous" \
- : "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT)); \
-} while(0)
-
-#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
-
-
-#define _LoadHWU(addr, value, res, type) \
-do { \
- __asm__ __volatile__ ( \
- ".set\tnoat\n" \
- "1:\t"type##_lbu("%0", "1(%2)")"\n" \
- "2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
- "sll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "li\t%1, 0\n" \
- "3:\n\t" \
- ".insn\n\t" \
- ".set\tat\n\t" \
- ".section\t.fixup,\"ax\"\n\t" \
- "4:\tli\t%1, %3\n\t" \
- "j\t3b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 4b\n\t" \
- STR(PTR)"\t2b, 4b\n\t" \
- ".previous" \
- : "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT)); \
-} while(0)
-
-#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
-#define _LoadWU(addr, value, res, type) \
-do { \
- __asm__ __volatile__ ( \
- "1:\t"type##_lwl("%0", "3(%2)")"\n" \
- "2:\t"type##_lwr("%0", "(%2)")"\n\t"\
- "dsll\t%0, %0, 32\n\t" \
- "dsrl\t%0, %0, 32\n\t" \
- "li\t%1, 0\n" \
- "3:\n\t" \
- ".insn\n\t" \
- "\t.section\t.fixup,\"ax\"\n\t" \
- "4:\tli\t%1, %3\n\t" \
- "j\t3b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 4b\n\t" \
- STR(PTR)"\t2b, 4b\n\t" \
- ".previous" \
- : "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT)); \
-} while(0)
-
-#define _LoadDW(addr, value, res) \
-do { \
- __asm__ __volatile__ ( \
- "1:\tldl\t%0, 7(%2)\n" \
- "2:\tldr\t%0, (%2)\n\t" \
- "li\t%1, 0\n" \
- "3:\n\t" \
- ".insn\n\t" \
- "\t.section\t.fixup,\"ax\"\n\t" \
- "4:\tli\t%1, %3\n\t" \
- "j\t3b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 4b\n\t" \
- STR(PTR)"\t2b, 4b\n\t" \
- ".previous" \
- : "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT)); \
-} while(0)
-
-#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
-/* For CPUs without lwl and ldl instructions */
-#define _LoadWU(addr, value, res, type) \
-do { \
- __asm__ __volatile__ ( \
- ".set\tpush\n\t" \
- ".set\tnoat\n\t" \
- "1:"type##_lbu("%0", "3(%2)")"\n\t" \
- "2:"type##_lbu("$1", "2(%2)")"\n\t" \
- "sll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "3:"type##_lbu("$1", "1(%2)")"\n\t" \
- "sll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "4:"type##_lbu("$1", "0(%2)")"\n\t" \
- "sll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "li\t%1, 0\n" \
- ".set\tpop\n" \
- "10:\n\t" \
- ".insn\n\t" \
- ".section\t.fixup,\"ax\"\n\t" \
- "11:\tli\t%1, %3\n\t" \
- "j\t10b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 11b\n\t" \
- STR(PTR)"\t2b, 11b\n\t" \
- STR(PTR)"\t3b, 11b\n\t" \
- STR(PTR)"\t4b, 11b\n\t" \
- ".previous" \
- : "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT)); \
-} while(0)
-
-#define _LoadDW(addr, value, res) \
-do { \
- __asm__ __volatile__ ( \
- ".set\tpush\n\t" \
- ".set\tnoat\n\t" \
- "1:lb\t%0, 7(%2)\n\t" \
- "2:lbu\t$1, 6(%2)\n\t" \
- "dsll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "3:lbu\t$1, 5(%2)\n\t" \
- "dsll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "4:lbu\t$1, 4(%2)\n\t" \
- "dsll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "5:lbu\t$1, 3(%2)\n\t" \
- "dsll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "6:lbu\t$1, 2(%2)\n\t" \
- "dsll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "7:lbu\t$1, 1(%2)\n\t" \
- "dsll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "8:lbu\t$1, 0(%2)\n\t" \
- "dsll\t%0, 0x8\n\t" \
- "or\t%0, $1\n\t" \
- "li\t%1, 0\n" \
- ".set\tpop\n\t" \
- "10:\n\t" \
- ".insn\n\t" \
- ".section\t.fixup,\"ax\"\n\t" \
- "11:\tli\t%1, %3\n\t" \
- "j\t10b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 11b\n\t" \
- STR(PTR)"\t2b, 11b\n\t" \
- STR(PTR)"\t3b, 11b\n\t" \
- STR(PTR)"\t4b, 11b\n\t" \
- STR(PTR)"\t5b, 11b\n\t" \
- STR(PTR)"\t6b, 11b\n\t" \
- STR(PTR)"\t7b, 11b\n\t" \
- STR(PTR)"\t8b, 11b\n\t" \
- ".previous" \
- : "=&r" (value), "=r" (res) \
- : "r" (addr), "i" (-EFAULT)); \
-} while(0)
-#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
-
-#define _StoreHW(addr, value, res, type) \
-do { \
- __asm__ __volatile__ ( \
- ".set\tnoat\n" \
- "1:\t"type##_sb("%1", "0(%2)")"\n" \
- "srl\t$1,%1, 0x8\n" \
- "2:\t"type##_sb("$1", "1(%2)")"\n" \
- ".set\tat\n\t" \
- "li\t%0, 0\n" \
- "3:\n\t" \
- ".insn\n\t" \
- ".section\t.fixup,\"ax\"\n\t" \
- "4:\tli\t%0, %3\n\t" \
- "j\t3b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 4b\n\t" \
- STR(PTR)"\t2b, 4b\n\t" \
- ".previous" \
- : "=r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT));\
-} while(0)
-
-#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
-#define _StoreW(addr, value, res, type) \
-do { \
- __asm__ __volatile__ ( \
- "1:\t"type##_swl("%1", "3(%2)")"\n" \
- "2:\t"type##_swr("%1", "(%2)")"\n\t"\
- "li\t%0, 0\n" \
- "3:\n\t" \
- ".insn\n\t" \
- ".section\t.fixup,\"ax\"\n\t" \
- "4:\tli\t%0, %3\n\t" \
- "j\t3b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 4b\n\t" \
- STR(PTR)"\t2b, 4b\n\t" \
- ".previous" \
- : "=r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT)); \
-} while(0)
-
-#define _StoreDW(addr, value, res) \
-do { \
- __asm__ __volatile__ ( \
- "1:\tsdl\t%1, 7(%2)\n" \
- "2:\tsdr\t%1, (%2)\n\t" \
- "li\t%0, 0\n" \
- "3:\n\t" \
- ".insn\n\t" \
- ".section\t.fixup,\"ax\"\n\t" \
- "4:\tli\t%0, %3\n\t" \
- "j\t3b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 4b\n\t" \
- STR(PTR)"\t2b, 4b\n\t" \
- ".previous" \
- : "=r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT)); \
-} while(0)
-
-#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
-/* For CPUs without swl and sdl instructions */
-#define _StoreW(addr, value, res, type) \
-do { \
- __asm__ __volatile__ ( \
- ".set\tpush\n\t" \
- ".set\tnoat\n\t" \
- "1:"type##_sb("%1", "0(%2)")"\n\t" \
- "srl\t$1, %1, 0x8\n\t" \
- "2:"type##_sb("$1", "1(%2)")"\n\t" \
- "srl\t$1, $1, 0x8\n\t" \
- "3:"type##_sb("$1", "2(%2)")"\n\t" \
- "srl\t$1, $1, 0x8\n\t" \
- "4:"type##_sb("$1", "3(%2)")"\n\t" \
- ".set\tpop\n\t" \
- "li\t%0, 0\n" \
- "10:\n\t" \
- ".insn\n\t" \
- ".section\t.fixup,\"ax\"\n\t" \
- "11:\tli\t%0, %3\n\t" \
- "j\t10b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 11b\n\t" \
- STR(PTR)"\t2b, 11b\n\t" \
- STR(PTR)"\t3b, 11b\n\t" \
- STR(PTR)"\t4b, 11b\n\t" \
- ".previous" \
- : "=&r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT) \
- : "memory"); \
-} while(0)
-
-#define _StoreDW(addr, value, res) \
-do { \
- __asm__ __volatile__ ( \
- ".set\tpush\n\t" \
- ".set\tnoat\n\t" \
- "1:sb\t%1, 0(%2)\n\t" \
- "dsrl\t$1, %1, 0x8\n\t" \
- "2:sb\t$1, 1(%2)\n\t" \
- "dsrl\t$1, $1, 0x8\n\t" \
- "3:sb\t$1, 2(%2)\n\t" \
- "dsrl\t$1, $1, 0x8\n\t" \
- "4:sb\t$1, 3(%2)\n\t" \
- "dsrl\t$1, $1, 0x8\n\t" \
- "5:sb\t$1, 4(%2)\n\t" \
- "dsrl\t$1, $1, 0x8\n\t" \
- "6:sb\t$1, 5(%2)\n\t" \
- "dsrl\t$1, $1, 0x8\n\t" \
- "7:sb\t$1, 6(%2)\n\t" \
- "dsrl\t$1, $1, 0x8\n\t" \
- "8:sb\t$1, 7(%2)\n\t" \
- "dsrl\t$1, $1, 0x8\n\t" \
- ".set\tpop\n\t" \
- "li\t%0, 0\n" \
- "10:\n\t" \
- ".insn\n\t" \
- ".section\t.fixup,\"ax\"\n\t" \
- "11:\tli\t%0, %3\n\t" \
- "j\t10b\n\t" \
- ".previous\n\t" \
- ".section\t__ex_table,\"a\"\n\t" \
- STR(PTR)"\t1b, 11b\n\t" \
- STR(PTR)"\t2b, 11b\n\t" \
- STR(PTR)"\t3b, 11b\n\t" \
- STR(PTR)"\t4b, 11b\n\t" \
- STR(PTR)"\t5b, 11b\n\t" \
- STR(PTR)"\t6b, 11b\n\t" \
- STR(PTR)"\t7b, 11b\n\t" \
- STR(PTR)"\t8b, 11b\n\t" \
- ".previous" \
- : "=&r" (res) \
- : "r" (value), "r" (addr), "i" (-EFAULT) \
- : "memory"); \
-} while(0)
-
-#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
-#endif
-
-#define LoadHWU(addr, value, res) _LoadHWU(addr, value, res, kernel)
-#define LoadHWUE(addr, value, res) _LoadHWU(addr, value, res, user)
-#define LoadWU(addr, value, res) _LoadWU(addr, value, res, kernel)
-#define LoadWUE(addr, value, res) _LoadWU(addr, value, res, user)
-#define LoadHW(addr, value, res) _LoadHW(addr, value, res, kernel)
-#define LoadHWE(addr, value, res) _LoadHW(addr, value, res, user)
-#define LoadW(addr, value, res) _LoadW(addr, value, res, kernel)
-#define LoadWE(addr, value, res) _LoadW(addr, value, res, user)
-#define LoadDW(addr, value, res) _LoadDW(addr, value, res)
-
-#define StoreHW(addr, value, res) _StoreHW(addr, value, res, kernel)
-#define StoreHWE(addr, value, res) _StoreHW(addr, value, res, user)
-#define StoreW(addr, value, res) _StoreW(addr, value, res, kernel)
-#define StoreWE(addr, value, res) _StoreW(addr, value, res, user)
-#define StoreDW(addr, value, res) _StoreDW(addr, value, res)
-
static void emulate_load_store_insn(struct pt_regs *regs,
void __user *addr, unsigned int __user *pc)
{
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index a5f00ec73ea6..f185a85a27c1 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -55,7 +55,7 @@ SECTIONS
/* . = 0xa800000000300000; */
. = 0xffffffff80300000;
#endif
- . = VMLINUX_LOAD_ADDRESS;
+ . = LINKER_LOAD_ADDRESS;
/* read-only */
_text = .; /* Text and read-only data */
.text : {
diff --git a/arch/mips/kernel/watch.c b/arch/mips/kernel/watch.c
index ba73b4077668..c9263b95cb2e 100644
--- a/arch/mips/kernel/watch.c
+++ b/arch/mips/kernel/watch.c
@@ -27,15 +27,15 @@ void mips_install_watch_registers(struct task_struct *t)
case 4:
write_c0_watchlo3(watches->watchlo[3]);
write_c0_watchhi3(watchhi | watches->watchhi[3]);
- /* fall through */
+ fallthrough;
case 3:
write_c0_watchlo2(watches->watchlo[2]);
write_c0_watchhi2(watchhi | watches->watchhi[2]);
- /* fall through */
+ fallthrough;
case 2:
write_c0_watchlo1(watches->watchlo[1]);
write_c0_watchhi1(watchhi | watches->watchhi[1]);
- /* fall through */
+ fallthrough;
case 1:
write_c0_watchlo0(watches->watchlo[0]);
write_c0_watchhi0(watchhi | watches->watchhi[0]);
@@ -58,13 +58,13 @@ void mips_read_watch_registers(void)
BUG();
case 4:
watches->watchhi[3] = (read_c0_watchhi3() & watchhi_mask);
- /* fall through */
+ fallthrough;
case 3:
watches->watchhi[2] = (read_c0_watchhi2() & watchhi_mask);
- /* fall through */
+ fallthrough;
case 2:
watches->watchhi[1] = (read_c0_watchhi1() & watchhi_mask);
- /* fall through */
+ fallthrough;
case 1:
watches->watchhi[0] = (read_c0_watchhi0() & watchhi_mask);
}
@@ -91,25 +91,25 @@ void mips_clear_watch_registers(void)
BUG();
case 8:
write_c0_watchlo7(0);
- /* fall through */
+ fallthrough;
case 7:
write_c0_watchlo6(0);
- /* fall through */
+ fallthrough;
case 6:
write_c0_watchlo5(0);
- /* fall through */
+ fallthrough;
case 5:
write_c0_watchlo4(0);
- /* fall through */
+ fallthrough;
case 4:
write_c0_watchlo3(0);
- /* fall through */
+ fallthrough;
case 3:
write_c0_watchlo2(0);
- /* fall through */
+ fallthrough;
case 2:
write_c0_watchlo1(0);
- /* fall through */
+ fallthrough;
case 1:
write_c0_watchlo0(0);
}
diff --git a/arch/mips/kvm/emulate.c b/arch/mips/kvm/emulate.c
index 754094b40a75..7ccf9b096783 100644
--- a/arch/mips/kvm/emulate.c
+++ b/arch/mips/kvm/emulate.c
@@ -64,7 +64,7 @@ static int kvm_compute_return_epc(struct kvm_vcpu *vcpu, unsigned long instpc,
switch (insn.r_format.func) {
case jalr_op:
arch->gprs[insn.r_format.rd] = epc + 8;
- /* Fall through */
+ fallthrough;
case jr_op:
nextpc = arch->gprs[insn.r_format.rs];
break;
@@ -140,7 +140,7 @@ static int kvm_compute_return_epc(struct kvm_vcpu *vcpu, unsigned long instpc,
/* These are unconditional and in j_format. */
case jal_op:
arch->gprs[31] = instpc + 8;
- /* fall through */
+ fallthrough;
case j_op:
epc += 4;
epc >>= 28;
@@ -1724,14 +1724,14 @@ enum emulation_result kvm_mips_emulate_load(union mips_instruction inst,
case lhu_op:
vcpu->mmio_needed = 1; /* unsigned */
- /* fall through */
+ fallthrough;
case lh_op:
run->mmio.len = 2;
break;
case lbu_op:
vcpu->mmio_needed = 1; /* unsigned */
- /* fall through */
+ fallthrough;
case lb_op:
run->mmio.len = 1;
break;
@@ -1790,7 +1790,7 @@ static enum emulation_result kvm_mips_guest_cache_op(int (*fn)(unsigned long),
return EMULATE_EXCEPT;
default:
break;
- };
+ }
}
}
@@ -1965,7 +1965,7 @@ enum emulation_result kvm_mips_emulate_inst(u32 cause, u32 *opc,
break;
default:
goto unknown;
- };
+ }
break;
unknown:
#endif
diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c
index 8f05dd0a0f4e..2261c63174c5 100644
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -80,13 +80,13 @@ bool kvm_trace_guest_mode_change;
int kvm_guest_mode_change_trace_reg(void)
{
- kvm_trace_guest_mode_change = 1;
+ kvm_trace_guest_mode_change = true;
return 0;
}
void kvm_guest_mode_change_trace_unreg(void)
{
- kvm_trace_guest_mode_change = 0;
+ kvm_trace_guest_mode_change = false;
}
/*
diff --git a/arch/mips/kvm/tlb.c b/arch/mips/kvm/tlb.c
index 7cd92166a0b9..5d436c5216cc 100644
--- a/arch/mips/kvm/tlb.c
+++ b/arch/mips/kvm/tlb.c
@@ -469,7 +469,7 @@ void kvm_vz_local_flush_guesttlb_all(void)
cvmmemctl2 |= CVMMEMCTL2_INHIBITTS;
write_c0_cvmmemctl2(cvmmemctl2);
break;
- };
+ }
/* Invalidate guest entries in guest TLB */
write_gc0_entrylo0(0);
@@ -486,7 +486,7 @@ void kvm_vz_local_flush_guesttlb_all(void)
if (cvmmemctl2) {
cvmmemctl2 &= ~CVMMEMCTL2_INHIBITTS;
write_c0_cvmmemctl2(cvmmemctl2);
- };
+ }
write_gc0_index(old_index);
write_gc0_entryhi(old_entryhi);
diff --git a/arch/mips/kvm/vz.c b/arch/mips/kvm/vz.c
index dde20887a70d..51f51009a53f 100644
--- a/arch/mips/kvm/vz.c
+++ b/arch/mips/kvm/vz.c
@@ -1118,7 +1118,7 @@ static enum emulation_result kvm_vz_gpsi_cache(union mips_instruction inst,
break;
default:
break;
- };
+ }
kvm_err("@ %#lx/%#lx CACHE (cache: %#x, op: %#x, base[%d]: %#lx, offset: %#x\n",
curr_pc, vcpu->arch.gprs[31], cache, op, base, arch->gprs[base],
@@ -1183,7 +1183,7 @@ static enum emulation_result kvm_trap_vz_handle_gpsi(u32 cause, u32 *opc,
trace_kvm_hwr(vcpu, KVM_TRACE_RDHWR,
KVM_TRACE_HWR(rd, sel), 0);
goto unknown;
- };
+ }
trace_kvm_hwr(vcpu, KVM_TRACE_RDHWR,
KVM_TRACE_HWR(rd, sel), arch->gprs[rt]);
@@ -1192,7 +1192,7 @@ static enum emulation_result kvm_trap_vz_handle_gpsi(u32 cause, u32 *opc,
break;
default:
goto unknown;
- };
+ }
break;
unknown:
@@ -1946,7 +1946,7 @@ static int kvm_vz_get_one_reg(struct kvm_vcpu *vcpu,
default:
*v = (long)kvm_read_c0_guest_prid(cop0);
break;
- };
+ }
break;
case KVM_REG_MIPS_CP0_EBASE:
*v = kvm_vz_read_gc0_ebase();
@@ -2185,7 +2185,7 @@ static int kvm_vz_set_one_reg(struct kvm_vcpu *vcpu,
default:
kvm_write_c0_guest_prid(cop0, v);
break;
- };
+ }
break;
case KVM_REG_MIPS_CP0_EBASE:
kvm_vz_write_gc0_ebase(v);
@@ -2980,7 +2980,7 @@ static int kvm_vz_vcpu_setup(struct kvm_vcpu *vcpu)
*/
/* PageGrain */
- if (cpu_has_mips_r6)
+ if (cpu_has_mips_r5 || cpu_has_mips_r6)
kvm_write_sw_gc0_pagegrain(cop0, PG_RIE | PG_XIE | PG_IEC);
/* Wired */
if (cpu_has_mips_r6)
@@ -2988,7 +2988,7 @@ static int kvm_vz_vcpu_setup(struct kvm_vcpu *vcpu)
read_gc0_wired() & MIPSR6_WIRED_LIMIT);
/* Status */
kvm_write_sw_gc0_status(cop0, ST0_BEV | ST0_ERL);
- if (cpu_has_mips_r6)
+ if (cpu_has_mips_r5 || cpu_has_mips_r6)
kvm_change_sw_gc0_status(cop0, ST0_FR, read_gc0_status());
/* IntCtl */
kvm_write_sw_gc0_intctl(cop0, read_gc0_intctl() &
@@ -3086,7 +3086,7 @@ static int kvm_vz_vcpu_setup(struct kvm_vcpu *vcpu)
}
/* reset HTW registers */
- if (cpu_guest_has_htw && cpu_has_mips_r6) {
+ if (cpu_guest_has_htw && (cpu_has_mips_r5 || cpu_has_mips_r6)) {
/* PWField */
kvm_write_sw_gc0_pwfield(cop0, 0x0c30c302);
/* PWSize */
diff --git a/arch/mips/lantiq/Platform b/arch/mips/lantiq/Platform
index b3ec49838fd7..0bc9c0fbd431 100644
--- a/arch/mips/lantiq/Platform
+++ b/arch/mips/lantiq/Platform
@@ -2,7 +2,6 @@
# Lantiq
#
-platform-$(CONFIG_LANTIQ) += lantiq/
cflags-$(CONFIG_LANTIQ) += -I$(srctree)/arch/mips/include/asm/mach-lantiq
load-$(CONFIG_LANTIQ) = 0xffffffff80002000
cflags-$(CONFIG_SOC_TYPE_XWAY) += -I$(srctree)/arch/mips/include/asm/mach-lantiq/xway
diff --git a/arch/mips/lasat/Kconfig b/arch/mips/lasat/Kconfig
deleted file mode 100644
index 11b89e94b835..000000000000
--- a/arch/mips/lasat/Kconfig
+++ /dev/null
@@ -1,16 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config PICVUE
- tristate "PICVUE LCD display driver"
- depends on LASAT
-
-config PICVUE_PROC
- tristate "PICVUE LCD display driver /proc interface"
- depends on PICVUE && PROC_FS
-
-config DS1603
- bool "DS1603 RTC driver"
- depends on LASAT
-
-config LASAT_SYSCTL
- bool "LASAT sysctl interface"
- depends on LASAT
diff --git a/arch/mips/lasat/Makefile b/arch/mips/lasat/Makefile
deleted file mode 100644
index 1789b227ef20..000000000000
--- a/arch/mips/lasat/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the LASAT specific kernel interface routines under Linux.
-#
-
-obj-y += reset.o setup.o prom.o lasat_board.o \
- at93c.o interrupt.o serial.o
-
-obj-$(CONFIG_LASAT_SYSCTL) += sysctl.o
-obj-$(CONFIG_DS1603) += ds1603.o
-obj-$(CONFIG_PICVUE) += picvue.o
-obj-$(CONFIG_PICVUE_PROC) += picvue_proc.o
-
-clean:
- make -C image clean
diff --git a/arch/mips/lasat/Platform b/arch/mips/lasat/Platform
deleted file mode 100644
index 760252828bf1..000000000000
--- a/arch/mips/lasat/Platform
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# LASAT platforms
-#
-platform-$(CONFIG_LASAT) += lasat/
-cflags-$(CONFIG_LASAT) += \
- -I$(srctree)/arch/mips/include/asm/mach-lasat
-load-$(CONFIG_LASAT) += 0xffffffff80000000
diff --git a/arch/mips/lasat/at93c.c b/arch/mips/lasat/at93c.c
deleted file mode 100644
index f895fe94b937..000000000000
--- a/arch/mips/lasat/at93c.c
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Atmel AT93C46 serial eeprom driver
- *
- * Brian Murphy <brian.murphy@eicon.com>
- *
- */
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <asm/lasat/lasat.h>
-
-#include "at93c.h"
-
-#define AT93C_ADDR_SHIFT 7
-#define AT93C_ADDR_MAX ((1 << AT93C_ADDR_SHIFT) - 1)
-#define AT93C_RCMD (0x6 << AT93C_ADDR_SHIFT)
-#define AT93C_WCMD (0x5 << AT93C_ADDR_SHIFT)
-#define AT93C_WENCMD 0x260
-#define AT93C_WDSCMD 0x200
-
-struct at93c_defs *at93c;
-
-static void at93c_reg_write(u32 val)
-{
- *at93c->reg = val;
-}
-
-static u32 at93c_reg_read(void)
-{
- u32 tmp = *at93c->reg;
- return tmp;
-}
-
-static u32 at93c_datareg_read(void)
-{
- u32 tmp = *at93c->rdata_reg;
- return tmp;
-}
-
-static void at93c_cycle_clk(u32 data)
-{
- at93c_reg_write(data | at93c->clk);
- lasat_ndelay(250);
- at93c_reg_write(data & ~at93c->clk);
- lasat_ndelay(250);
-}
-
-static void at93c_write_databit(u8 bit)
-{
- u32 data = at93c_reg_read();
- if (bit)
- data |= 1 << at93c->wdata_shift;
- else
- data &= ~(1 << at93c->wdata_shift);
-
- at93c_reg_write(data);
- lasat_ndelay(100);
- at93c_cycle_clk(data);
-}
-
-static unsigned int at93c_read_databit(void)
-{
- u32 data;
-
- at93c_cycle_clk(at93c_reg_read());
- data = (at93c_datareg_read() >> at93c->rdata_shift) & 1;
- return data;
-}
-
-static u8 at93c_read_byte(void)
-{
- int i;
- u8 data = 0;
-
- for (i = 0; i <= 7; i++) {
- data <<= 1;
- data |= at93c_read_databit();
- }
- return data;
-}
-
-static void at93c_write_bits(u32 data, int size)
-{
- int i;
- int shift = size - 1;
- u32 mask = (1 << shift);
-
- for (i = 0; i < size; i++) {
- at93c_write_databit((data & mask) >> shift);
- data <<= 1;
- }
-}
-
-static void at93c_init_op(void)
-{
- at93c_reg_write((at93c_reg_read() | at93c->cs) &
- ~at93c->clk & ~(1 << at93c->rdata_shift));
- lasat_ndelay(50);
-}
-
-static void at93c_end_op(void)
-{
- at93c_reg_write(at93c_reg_read() & ~at93c->cs);
- lasat_ndelay(250);
-}
-
-static void at93c_wait(void)
-{
- at93c_init_op();
- while (!at93c_read_databit())
- ;
- at93c_end_op();
-};
-
-static void at93c_disable_wp(void)
-{
- at93c_init_op();
- at93c_write_bits(AT93C_WENCMD, 10);
- at93c_end_op();
-}
-
-static void at93c_enable_wp(void)
-{
- at93c_init_op();
- at93c_write_bits(AT93C_WDSCMD, 10);
- at93c_end_op();
-}
-
-u8 at93c_read(u8 addr)
-{
- u8 byte;
- at93c_init_op();
- at93c_write_bits((addr & AT93C_ADDR_MAX)|AT93C_RCMD, 10);
- byte = at93c_read_byte();
- at93c_end_op();
- return byte;
-}
-
-void at93c_write(u8 addr, u8 data)
-{
- at93c_disable_wp();
- at93c_init_op();
- at93c_write_bits((addr & AT93C_ADDR_MAX)|AT93C_WCMD, 10);
- at93c_write_bits(data, 8);
- at93c_end_op();
- at93c_wait();
- at93c_enable_wp();
-}
diff --git a/arch/mips/lasat/at93c.h b/arch/mips/lasat/at93c.h
deleted file mode 100644
index 7a99a02d81d0..000000000000
--- a/arch/mips/lasat/at93c.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Atmel AT93C46 serial eeprom driver
- *
- * Brian Murphy <brian.murphy@eicon.com>
- *
- */
-
-extern struct at93c_defs {
- volatile u32 *reg;
- volatile u32 *rdata_reg;
- int rdata_shift;
- int wdata_shift;
- u32 cs;
- u32 clk;
-} *at93c;
-
-u8 at93c_read(u8 addr);
-void at93c_write(u8 addr, u8 data);
diff --git a/arch/mips/lasat/ds1603.c b/arch/mips/lasat/ds1603.c
deleted file mode 100644
index e6ce39fefa78..000000000000
--- a/arch/mips/lasat/ds1603.c
+++ /dev/null
@@ -1,190 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Dallas Semiconductors 1603 RTC driver
- *
- * Brian Murphy <brian@murphy.dk>
- *
- */
-#include <linux/kernel.h>
-#include <asm/lasat/lasat.h>
-#include <linux/delay.h>
-#include <asm/lasat/ds1603.h>
-#include <asm/time.h>
-
-#include "ds1603.h"
-
-#define READ_TIME_CMD 0x81
-#define SET_TIME_CMD 0x80
-#define TRIMMER_SET_CMD 0xC0
-#define TRIMMER_VALUE_MASK 0x38
-#define TRIMMER_SHIFT 3
-
-struct ds_defs *ds1603;
-
-/* HW specific register functions */
-static void rtc_reg_write(unsigned long val)
-{
- *ds1603->reg = val;
-}
-
-static unsigned long rtc_reg_read(void)
-{
- unsigned long tmp = *ds1603->reg;
- return tmp;
-}
-
-static unsigned long rtc_datareg_read(void)
-{
- unsigned long tmp = *ds1603->data_reg;
- return tmp;
-}
-
-static void rtc_nrst_high(void)
-{
- rtc_reg_write(rtc_reg_read() | ds1603->rst);
-}
-
-static void rtc_nrst_low(void)
-{
- rtc_reg_write(rtc_reg_read() & ~ds1603->rst);
-}
-
-static void rtc_cycle_clock(unsigned long data)
-{
- data |= ds1603->clk;
- rtc_reg_write(data);
- lasat_ndelay(250);
- if (ds1603->data_reversed)
- data &= ~ds1603->data;
- else
- data |= ds1603->data;
- data &= ~ds1603->clk;
- rtc_reg_write(data);
- lasat_ndelay(250 + ds1603->huge_delay);
-}
-
-static void rtc_write_databit(unsigned int bit)
-{
- unsigned long data = rtc_reg_read();
- if (ds1603->data_reversed)
- bit = !bit;
- if (bit)
- data |= ds1603->data;
- else
- data &= ~ds1603->data;
-
- rtc_reg_write(data);
- lasat_ndelay(50 + ds1603->huge_delay);
- rtc_cycle_clock(data);
-}
-
-static unsigned int rtc_read_databit(void)
-{
- unsigned int data;
-
- data = (rtc_datareg_read() & (1 << ds1603->data_read_shift))
- >> ds1603->data_read_shift;
- rtc_cycle_clock(rtc_reg_read());
- return data;
-}
-
-static void rtc_write_byte(unsigned int byte)
-{
- int i;
-
- for (i = 0; i <= 7; i++) {
- rtc_write_databit(byte & 1L);
- byte >>= 1;
- }
-}
-
-static void rtc_write_word(unsigned long word)
-{
- int i;
-
- for (i = 0; i <= 31; i++) {
- rtc_write_databit(word & 1L);
- word >>= 1;
- }
-}
-
-static unsigned long rtc_read_word(void)
-{
- int i;
- unsigned long word = 0;
- unsigned long shift = 0;
-
- for (i = 0; i <= 31; i++) {
- word |= rtc_read_databit() << shift;
- shift++;
- }
- return word;
-}
-
-static void rtc_init_op(void)
-{
- rtc_nrst_high();
-
- rtc_reg_write(rtc_reg_read() & ~ds1603->clk);
-
- lasat_ndelay(50);
-}
-
-static void rtc_end_op(void)
-{
- rtc_nrst_low();
- lasat_ndelay(1000);
-}
-
-void read_persistent_clock64(struct timespec64 *ts)
-{
- unsigned long word;
- unsigned long flags;
-
- spin_lock_irqsave(&rtc_lock, flags);
- rtc_init_op();
- rtc_write_byte(READ_TIME_CMD);
- word = rtc_read_word();
- rtc_end_op();
- spin_unlock_irqrestore(&rtc_lock, flags);
-
- ts->tv_sec = word;
- ts->tv_nsec = 0;
-}
-
-int update_persistent_clock64(struct timespec64 now)
-{
- time64_t time = now.tv_sec;
- unsigned long flags;
-
- spin_lock_irqsave(&rtc_lock, flags);
- rtc_init_op();
- rtc_write_byte(SET_TIME_CMD);
- /*
- * Due to the hardware limitation, we cast to 'unsigned long' type,
- * so it will overflow in year 2106 on 32-bit machine.
- */
- rtc_write_word((unsigned long)time);
- rtc_end_op();
- spin_unlock_irqrestore(&rtc_lock, flags);
-
- return 0;
-}
-
-void ds1603_set_trimmer(unsigned int trimval)
-{
- rtc_init_op();
- rtc_write_byte(((trimval << TRIMMER_SHIFT) & TRIMMER_VALUE_MASK)
- | (TRIMMER_SET_CMD));
- rtc_end_op();
-}
-
-void ds1603_disable(void)
-{
- ds1603_set_trimmer(TRIMMER_DISABLE_RTC);
-}
-
-void ds1603_enable(void)
-{
- ds1603_set_trimmer(TRIMMER_DEFAULT);
-}
diff --git a/arch/mips/lasat/ds1603.h b/arch/mips/lasat/ds1603.h
deleted file mode 100644
index 00987d3bdc21..000000000000
--- a/arch/mips/lasat/ds1603.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Dallas Semiconductors 1603 RTC driver
- *
- * Brian Murphy <brian@murphy.dk>
- *
- */
-#ifndef __DS1603_H
-#define __DS1603_H
-
-struct ds_defs {
- volatile u32 *reg;
- volatile u32 *data_reg;
- u32 rst;
- u32 clk;
- u32 data;
- u32 data_read_shift;
- char data_reversed;
- u32 huge_delay;
-};
-
-extern struct ds_defs *ds1603;
-
-void ds1603_set_trimmer(unsigned int);
-void ds1603_enable(void);
-void ds1603_disable(void);
-void ds1603_init(struct ds_defs *);
-
-#define TRIMMER_DEFAULT 3
-#define TRIMMER_DISABLE_RTC 0
-
-#endif
diff --git a/arch/mips/lasat/image/Makefile b/arch/mips/lasat/image/Makefile
deleted file mode 100644
index 78ce4cff1012..000000000000
--- a/arch/mips/lasat/image/Makefile
+++ /dev/null
@@ -1,53 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# MAKEFILE FOR THE MIPS LINUX BOOTLOADER AND ROM DEBUGGER
-#
-# i-data Networks
-#
-# Author: Thomas Horsten <thh@i-data.com>
-#
-
-ifndef Version
- Version = "$(USER)-test"
-endif
-
-MKLASATIMG = mklasatimg
-MKLASATIMG_ARCH = mq2,mqpro,sp100,sp200
-KERNEL_IMAGE = vmlinux
-
-LDSCRIPT= -L$(srctree)/$(src) -Tromscript.normal
-
-HEAD_DEFINES := -D_kernel_start=$(VMLINUX_LOAD_ADDRESS) \
- -D_kernel_entry=$(VMLINUX_ENTRY_ADDRESS) \
- -D VERSION="\"$(Version)\"" \
- -D TIMESTAMP=$(shell date +%s)
-
-$(obj)/head.o: $(obj)/head.S $(KERNEL_IMAGE)
- $(CC) -fno-pic $(HEAD_DEFINES) $(LINUXINCLUDE) -c -o $@ $<
-
-OBJECTS = head.o kImage.o
-
-rom.sw: $(obj)/rom.sw
-rom.bin: $(obj)/rom.bin
-
-$(obj)/rom.sw: $(obj)/rom.bin
- $(MKLASATIMG) -o $@ -k $^ -m $(MKLASATIMG_ARCH)
-
-$(obj)/rom.bin: $(obj)/rom
- $(OBJCOPY) -O binary -S $^ $@
-
-# Rule to make the bootloader
-$(obj)/rom: $(addprefix $(obj)/,$(OBJECTS))
- $(LD) $(KBUILD_LDFLAGS) $(LDSCRIPT) -o $@ $^
-
-$(obj)/%.o: $(obj)/%.gz
- $(LD) -r -o $@ -b binary $<
-
-$(obj)/%.gz: $(obj)/%.bin
- gzip -cf -9 $< > $@
-
-$(obj)/kImage.bin: $(KERNEL_IMAGE)
- $(OBJCOPY) -O binary -S $^ $@
-
-clean:
- rm -f rom rom.bin rom.sw kImage.bin kImage.o
diff --git a/arch/mips/lasat/image/head.S b/arch/mips/lasat/image/head.S
deleted file mode 100644
index 1a27312d4c2e..000000000000
--- a/arch/mips/lasat/image/head.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/lasat/head.h>
-
- .text
- .section .text..start, "ax"
- .set noreorder
- .set mips3
-
- /* Magic words identifying a software image */
- .word LASAT_K_MAGIC0_VAL
- .word LASAT_K_MAGIC1_VAL
-
- /* Image header version */
- .word 0x00000002
-
- /* image start and size */
- .word _image_start
- .word _image_size
-
- /* start of kernel and entrypoint in uncompressed image */
- .word _kernel_start
- .word _kernel_entry
-
- /* Here we have room for future flags */
-
- .org 0x40
-reldate:
- .word TIMESTAMP
-
- .org 0x50
-release:
- .string VERSION
diff --git a/arch/mips/lasat/image/romscript.normal b/arch/mips/lasat/image/romscript.normal
deleted file mode 100644
index 0864c963e188..000000000000
--- a/arch/mips/lasat/image/romscript.normal
+++ /dev/null
@@ -1,23 +0,0 @@
-OUTPUT_ARCH(mips)
-
-SECTIONS
-{
- .text :
- {
- *(.text..start)
- }
-
- /* Data in ROM */
-
- .data ALIGN(0x10) :
- {
- *(.data)
- }
- _image_start = ADDR(.data);
- _image_size = SIZEOF(.data);
-
- .other :
- {
- *(.*)
- }
-}
diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c
deleted file mode 100644
index 7965bbd0d319..000000000000
--- a/arch/mips/lasat/interrupt.c
+++ /dev/null
@@ -1,119 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
- *
- * Routines for generic manipulation of the interrupts found on the
- * Lasat boards.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/lasat/lasat.h>
-#include <asm/lasat/lasatint.h>
-
-#include <irq.h>
-
-static volatile int *lasat_int_status;
-static volatile int *lasat_int_mask;
-static volatile int lasat_int_mask_shift;
-
-void disable_lasat_irq(struct irq_data *d)
-{
- unsigned int irq_nr = d->irq - LASAT_IRQ_BASE;
-
- *lasat_int_mask &= ~(1 << irq_nr) << lasat_int_mask_shift;
-}
-
-void enable_lasat_irq(struct irq_data *d)
-{
- unsigned int irq_nr = d->irq - LASAT_IRQ_BASE;
-
- *lasat_int_mask |= (1 << irq_nr) << lasat_int_mask_shift;
-}
-
-static struct irq_chip lasat_irq_type = {
- .name = "Lasat",
- .irq_mask = disable_lasat_irq,
- .irq_unmask = enable_lasat_irq,
-};
-
-static inline int ls1bit32(unsigned int x)
-{
- int b = 31, s;
-
- s = 16; if (x << 16 == 0) s = 0; b -= s; x <<= s;
- s = 8; if (x << 8 == 0) s = 0; b -= s; x <<= s;
- s = 4; if (x << 4 == 0) s = 0; b -= s; x <<= s;
- s = 2; if (x << 2 == 0) s = 0; b -= s; x <<= s;
- s = 1; if (x << 1 == 0) s = 0; b -= s;
-
- return b;
-}
-
-static unsigned long (*get_int_status)(void);
-
-static unsigned long get_int_status_100(void)
-{
- return *lasat_int_status & *lasat_int_mask;
-}
-
-static unsigned long get_int_status_200(void)
-{
- unsigned long int_status;
-
- int_status = *lasat_int_status;
- int_status &= (int_status >> LASATINT_MASK_SHIFT_200) & 0xffff;
- return int_status;
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned long int_status;
- unsigned int cause = read_c0_cause();
- int irq;
-
- if (cause & CAUSEF_IP7) { /* R4000 count / compare IRQ */
- do_IRQ(7);
- return;
- }
-
- int_status = get_int_status();
-
- /* if int_status == 0, then the interrupt has already been cleared */
- if (int_status) {
- irq = LASAT_IRQ_BASE + ls1bit32(int_status);
-
- do_IRQ(irq);
- }
-}
-
-void __init arch_init_irq(void)
-{
- int irq = LASAT_CASCADE_IRQ;
- int i;
-
- if (IS_LASAT_200()) {
- lasat_int_status = (void *)LASAT_INT_STATUS_REG_200;
- lasat_int_mask = (void *)LASAT_INT_MASK_REG_200;
- lasat_int_mask_shift = LASATINT_MASK_SHIFT_200;
- get_int_status = get_int_status_200;
- *lasat_int_mask &= 0xffff;
- } else {
- lasat_int_status = (void *)LASAT_INT_STATUS_REG_100;
- lasat_int_mask = (void *)LASAT_INT_MASK_REG_100;
- lasat_int_mask_shift = LASATINT_MASK_SHIFT_100;
- get_int_status = get_int_status_100;
- *lasat_int_mask = 0;
- }
-
- mips_cpu_irq_init();
-
- for (i = LASAT_IRQ_BASE; i <= LASAT_IRQ_END; i++)
- irq_set_chip_and_handler(i, &lasat_irq_type, handle_level_irq);
-
- if (request_irq(irq, no_action, IRQF_NO_THREAD, "cascade", NULL))
- pr_err("Failed to request irq %d (cascade)\n", irq);
-}
diff --git a/arch/mips/lasat/lasat_board.c b/arch/mips/lasat/lasat_board.c
deleted file mode 100644
index 80e1ba541148..000000000000
--- a/arch/mips/lasat/lasat_board.c
+++ /dev/null
@@ -1,268 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Thomas Horsten <thh@lasat.com>
- * Copyright (C) 2000 LASAT Networks A/S.
- *
- * Routines specific to the LASAT boards
- */
-#include <linux/types.h>
-#include <linux/crc32.h>
-#include <asm/lasat/lasat.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <linux/mutex.h>
-#include <asm/addrspace.h>
-#include "at93c.h"
-/* New model description table */
-#include "lasat_models.h"
-
-static DEFINE_MUTEX(lasat_eeprom_mutex);
-
-#define EEPROM_CRC(data, len) (~crc32(~0, data, len))
-
-struct lasat_info lasat_board_info;
-
-int EEPROMRead(unsigned int pos, unsigned char *data, int len)
-{
- int i;
-
- for (i = 0; i < len; i++)
- *data++ = at93c_read(pos++);
-
- return 0;
-}
-
-int EEPROMWrite(unsigned int pos, unsigned char *data, int len)
-{
- int i;
-
- for (i = 0; i < len; i++)
- at93c_write(pos++, *data++);
-
- return 0;
-}
-
-static void init_flash_sizes(void)
-{
- unsigned long *lb = lasat_board_info.li_flashpart_base;
- unsigned long *ls = lasat_board_info.li_flashpart_size;
- int i;
-
- ls[LASAT_MTD_BOOTLOADER] = 0x40000;
- ls[LASAT_MTD_SERVICE] = 0xC0000;
- ls[LASAT_MTD_NORMAL] = 0x100000;
-
- if (!IS_LASAT_200()) {
- lasat_board_info.li_flash_base = 0x1e000000;
-
- lb[LASAT_MTD_BOOTLOADER] = 0x1e400000;
-
- if (lasat_board_info.li_flash_size > 0x200000) {
- ls[LASAT_MTD_CONFIG] = 0x100000;
- ls[LASAT_MTD_FS] = 0x500000;
- }
- } else {
- lasat_board_info.li_flash_base = 0x10000000;
-
- if (lasat_board_info.li_flash_size < 0x1000000) {
- lb[LASAT_MTD_BOOTLOADER] = 0x10000000;
- ls[LASAT_MTD_CONFIG] = 0x100000;
- if (lasat_board_info.li_flash_size >= 0x400000)
- ls[LASAT_MTD_FS] =
- lasat_board_info.li_flash_size - 0x300000;
- }
- }
-
- for (i = 1; i < LASAT_MTD_LAST; i++)
- lb[i] = lb[i-1] + ls[i-1];
-}
-
-int lasat_init_board_info(void)
-{
- int c;
- unsigned long crc;
- unsigned long cfg0, cfg1;
- const struct product_info *ppi;
- int i_n_base_models = N_BASE_MODELS;
- const char * const * i_txt_base_models = txt_base_models;
- int i_n_prids = N_PRIDS;
-
- memset(&lasat_board_info, 0, sizeof(lasat_board_info));
-
- /* First read the EEPROM info */
- EEPROMRead(0, (unsigned char *)&lasat_board_info.li_eeprom_info,
- sizeof(struct lasat_eeprom_struct));
-
- /* Check the CRC */
- crc = EEPROM_CRC((unsigned char *)(&lasat_board_info.li_eeprom_info),
- sizeof(struct lasat_eeprom_struct) - 4);
-
- if (crc != lasat_board_info.li_eeprom_info.crc32) {
- printk(KERN_WARNING "WARNING...\nWARNING...\nEEPROM CRC does "
- "not match calculated, attempting to soldier on...\n");
- }
-
- if (lasat_board_info.li_eeprom_info.version != LASAT_EEPROM_VERSION) {
- printk(KERN_WARNING "WARNING...\nWARNING...\nEEPROM version "
- "%d, wanted version %d, attempting to soldier on...\n",
- (unsigned int)lasat_board_info.li_eeprom_info.version,
- LASAT_EEPROM_VERSION);
- }
-
- cfg0 = lasat_board_info.li_eeprom_info.cfg[0];
- cfg1 = lasat_board_info.li_eeprom_info.cfg[1];
-
- if (LASAT_W0_DSCTYPE(cfg0) != 1) {
- printk(KERN_WARNING "WARNING...\nWARNING...\n"
- "Invalid configuration read from EEPROM, attempting to "
- "soldier on...");
- }
- /* We have a valid configuration */
-
- switch (LASAT_W0_SDRAMBANKSZ(cfg0)) {
- case 0:
- lasat_board_info.li_memsize = 0x0800000;
- break;
- case 1:
- lasat_board_info.li_memsize = 0x1000000;
- break;
- case 2:
- lasat_board_info.li_memsize = 0x2000000;
- break;
- case 3:
- lasat_board_info.li_memsize = 0x4000000;
- break;
- case 4:
- lasat_board_info.li_memsize = 0x8000000;
- break;
- default:
- lasat_board_info.li_memsize = 0;
- }
-
- switch (LASAT_W0_SDRAMBANKS(cfg0)) {
- case 0:
- break;
- case 1:
- lasat_board_info.li_memsize *= 2;
- break;
- default:
- break;
- }
-
- switch (LASAT_W0_BUSSPEED(cfg0)) {
- case 0x0:
- lasat_board_info.li_bus_hz = 60000000;
- break;
- case 0x1:
- lasat_board_info.li_bus_hz = 66000000;
- break;
- case 0x2:
- lasat_board_info.li_bus_hz = 66666667;
- break;
- case 0x3:
- lasat_board_info.li_bus_hz = 80000000;
- break;
- case 0x4:
- lasat_board_info.li_bus_hz = 83333333;
- break;
- case 0x5:
- lasat_board_info.li_bus_hz = 100000000;
- break;
- }
-
- switch (LASAT_W0_CPUCLK(cfg0)) {
- case 0x0:
- lasat_board_info.li_cpu_hz =
- lasat_board_info.li_bus_hz;
- break;
- case 0x1:
- lasat_board_info.li_cpu_hz =
- lasat_board_info.li_bus_hz +
- (lasat_board_info.li_bus_hz >> 1);
- break;
- case 0x2:
- lasat_board_info.li_cpu_hz =
- lasat_board_info.li_bus_hz +
- lasat_board_info.li_bus_hz;
- break;
- case 0x3:
- lasat_board_info.li_cpu_hz =
- lasat_board_info.li_bus_hz +
- lasat_board_info.li_bus_hz +
- (lasat_board_info.li_bus_hz >> 1);
- break;
- case 0x4:
- lasat_board_info.li_cpu_hz =
- lasat_board_info.li_bus_hz +
- lasat_board_info.li_bus_hz +
- lasat_board_info.li_bus_hz;
- break;
- }
-
- /* Flash size */
- switch (LASAT_W1_FLASHSIZE(cfg1)) {
- case 0:
- lasat_board_info.li_flash_size = 0x200000;
- break;
- case 1:
- lasat_board_info.li_flash_size = 0x400000;
- break;
- case 2:
- lasat_board_info.li_flash_size = 0x800000;
- break;
- case 3:
- lasat_board_info.li_flash_size = 0x1000000;
- break;
- case 4:
- lasat_board_info.li_flash_size = 0x2000000;
- break;
- }
-
- init_flash_sizes();
-
- lasat_board_info.li_bmid = LASAT_W0_BMID(cfg0);
- lasat_board_info.li_prid = lasat_board_info.li_eeprom_info.prid;
- if (lasat_board_info.li_prid == 0xffff || lasat_board_info.li_prid == 0)
- lasat_board_info.li_prid = lasat_board_info.li_bmid;
-
- /* Base model stuff */
- if (lasat_board_info.li_bmid > i_n_base_models)
- lasat_board_info.li_bmid = i_n_base_models;
- strcpy(lasat_board_info.li_bmstr,
- i_txt_base_models[lasat_board_info.li_bmid]);
-
- /* Product ID dependent values */
- c = lasat_board_info.li_prid;
- if (c >= i_n_prids) {
- strcpy(lasat_board_info.li_namestr, "Unknown Model");
- strcpy(lasat_board_info.li_typestr, "Unknown Type");
- } else {
- ppi = &vendor_info_table[0].vi_product_info[c];
- strcpy(lasat_board_info.li_namestr, ppi->pi_name);
- if (ppi->pi_type)
- strcpy(lasat_board_info.li_typestr, ppi->pi_type);
- else
- sprintf(lasat_board_info.li_typestr, "%d", 10 * c);
- }
-
- return 0;
-}
-
-void lasat_write_eeprom_info(void)
-{
- unsigned long crc;
-
- mutex_lock(&lasat_eeprom_mutex);
-
- /* Generate the CRC */
- crc = EEPROM_CRC((unsigned char *)(&lasat_board_info.li_eeprom_info),
- sizeof(struct lasat_eeprom_struct) - 4);
- lasat_board_info.li_eeprom_info.crc32 = crc;
-
- /* Write the EEPROM info */
- EEPROMWrite(0, (unsigned char *)&lasat_board_info.li_eeprom_info,
- sizeof(struct lasat_eeprom_struct));
-
- mutex_unlock(&lasat_eeprom_mutex);
-}
diff --git a/arch/mips/lasat/lasat_models.h b/arch/mips/lasat/lasat_models.h
deleted file mode 100644
index 474e57342484..000000000000
--- a/arch/mips/lasat/lasat_models.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Model description tables
- */
-#include <linux/kernel.h>
-
-struct product_info {
- const char *pi_name;
- const char *pi_type;
-};
-
-struct vendor_info {
- const char *vi_name;
- const struct product_info *vi_product_info;
-};
-
-/*
- * Base models
- */
-static const char * const txt_base_models[] = {
- "MQ 2", "MQ Pro", "SP 25", "SP 50", "SP 100", "SP 5000", "SP 7000",
- "SP 1000", "Unknown"
-};
-#define N_BASE_MODELS (ARRAY_SIZE(txt_base_models) - 1)
-
-/*
- * Eicon Networks
- */
-static const char txt_en_mq[] = "Masquerade";
-static const char txt_en_sp[] = "Safepipe";
-
-static const struct product_info product_info_eicon[] = {
- { txt_en_mq, "II" }, /* 0 */
- { txt_en_mq, "Pro" }, /* 1 */
- { txt_en_sp, "25" }, /* 2 */
- { txt_en_sp, "50" }, /* 3 */
- { txt_en_sp, "100" }, /* 4 */
- { txt_en_sp, "5000" }, /* 5 */
- { txt_en_sp, "7000" }, /* 6 */
- { txt_en_sp, "30" }, /* 7 */
- { txt_en_sp, "5100" }, /* 8 */
- { txt_en_sp, "7100" }, /* 9 */
- { txt_en_sp, "1110" }, /* 10 */
- { txt_en_sp, "3020" }, /* 11 */
- { txt_en_sp, "3030" }, /* 12 */
- { txt_en_sp, "5020" }, /* 13 */
- { txt_en_sp, "5030" }, /* 14 */
- { txt_en_sp, "1120" }, /* 15 */
- { txt_en_sp, "1130" }, /* 16 */
- { txt_en_sp, "6010" }, /* 17 */
- { txt_en_sp, "6110" }, /* 18 */
- { txt_en_sp, "6210" }, /* 19 */
- { txt_en_sp, "1020" }, /* 20 */
- { txt_en_sp, "1040" }, /* 21 */
- { txt_en_sp, "1050" }, /* 22 */
- { txt_en_sp, "1060" }, /* 23 */
-};
-
-#define N_PRIDS ARRAY_SIZE(product_info_eicon)
-
-/*
- * The vendor table
- */
-static struct vendor_info const vendor_info_table[] = {
- { "Eicon Networks", product_info_eicon },
-};
-
-#define N_VENDORS ARRAY_SIZE(vendor_info_table)
diff --git a/arch/mips/lasat/picvue.c b/arch/mips/lasat/picvue.c
deleted file mode 100644
index 08298ccf5ccf..000000000000
--- a/arch/mips/lasat/picvue.c
+++ /dev/null
@@ -1,242 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Picvue PVC160206 display driver
- *
- * Brian Murphy <brian@murphy.dk>
- *
- */
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <asm/bootinfo.h>
-#include <asm/lasat/lasat.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-
-#include "picvue.h"
-
-#define PVC_BUSY 0x80
-#define PVC_NLINES 2
-#define PVC_DISPMEM 80
-#define PVC_LINELEN PVC_DISPMEM / PVC_NLINES
-
-struct pvc_defs *picvue;
-
-static void pvc_reg_write(u32 val)
-{
- *picvue->reg = val;
-}
-
-static u32 pvc_reg_read(void)
-{
- u32 tmp = *picvue->reg;
- return tmp;
-}
-
-static void pvc_write_byte(u32 data, u8 byte)
-{
- data |= picvue->e;
- pvc_reg_write(data);
- data &= ~picvue->data_mask;
- data |= byte << picvue->data_shift;
- pvc_reg_write(data);
- ndelay(220);
- pvc_reg_write(data & ~picvue->e);
- ndelay(220);
-}
-
-static u8 pvc_read_byte(u32 data)
-{
- u8 byte;
-
- data |= picvue->e;
- pvc_reg_write(data);
- ndelay(220);
- byte = (pvc_reg_read() & picvue->data_mask) >> picvue->data_shift;
- data &= ~picvue->e;
- pvc_reg_write(data);
- ndelay(220);
- return byte;
-}
-
-static u8 pvc_read_data(void)
-{
- u32 data = pvc_reg_read();
- u8 byte;
- data |= picvue->rw;
- data &= ~picvue->rs;
- pvc_reg_write(data);
- ndelay(40);
- byte = pvc_read_byte(data);
- data |= picvue->rs;
- pvc_reg_write(data);
- return byte;
-}
-
-#define TIMEOUT 1000
-static int pvc_wait(void)
-{
- int i = TIMEOUT;
- int err = 0;
-
- while ((pvc_read_data() & PVC_BUSY) && i)
- i--;
- if (i == 0)
- err = -ETIME;
-
- return err;
-}
-
-#define MODE_INST 0
-#define MODE_DATA 1
-static void pvc_write(u8 byte, int mode)
-{
- u32 data = pvc_reg_read();
- data &= ~picvue->rw;
- if (mode == MODE_DATA)
- data |= picvue->rs;
- else
- data &= ~picvue->rs;
- pvc_reg_write(data);
- ndelay(40);
- pvc_write_byte(data, byte);
- if (mode == MODE_DATA)
- data &= ~picvue->rs;
- else
- data |= picvue->rs;
- pvc_reg_write(data);
- pvc_wait();
-}
-
-void pvc_write_string(const unsigned char *str, u8 addr, int line)
-{
- int i = 0;
-
- if (line > 0 && (PVC_NLINES > 1))
- addr += 0x40 * line;
- pvc_write(0x80 | addr, MODE_INST);
-
- while (*str != 0 && i < PVC_LINELEN) {
- pvc_write(*str++, MODE_DATA);
- i++;
- }
-}
-
-void pvc_write_string_centered(const unsigned char *str, int line)
-{
- int len = strlen(str);
- u8 addr;
-
- if (len > PVC_VISIBLE_CHARS)
- addr = 0;
- else
- addr = (PVC_VISIBLE_CHARS - strlen(str))/2;
-
- pvc_write_string(str, addr, line);
-}
-
-void pvc_dump_string(const unsigned char *str)
-{
- int len = strlen(str);
-
- pvc_write_string(str, 0, 0);
- if (len > PVC_VISIBLE_CHARS)
- pvc_write_string(&str[PVC_VISIBLE_CHARS], 0, 1);
-}
-
-#define BM_SIZE 8
-#define MAX_PROGRAMMABLE_CHARS 8
-int pvc_program_cg(int charnum, u8 bitmap[BM_SIZE])
-{
- int i;
- int addr;
-
- if (charnum > MAX_PROGRAMMABLE_CHARS)
- return -ENOENT;
-
- addr = charnum * 8;
- pvc_write(0x40 | addr, MODE_INST);
-
- for (i = 0; i < BM_SIZE; i++)
- pvc_write(bitmap[i], MODE_DATA);
- return 0;
-}
-
-#define FUNC_SET_CMD 0x20
-#define EIGHT_BYTE (1 << 4)
-#define FOUR_BYTE 0
-#define TWO_LINES (1 << 3)
-#define ONE_LINE 0
-#define LARGE_FONT (1 << 2)
-#define SMALL_FONT 0
-
-static void pvc_funcset(u8 cmd)
-{
- pvc_write(FUNC_SET_CMD | (cmd & (EIGHT_BYTE|TWO_LINES|LARGE_FONT)),
- MODE_INST);
-}
-
-#define ENTRYMODE_CMD 0x4
-#define AUTO_INC (1 << 1)
-#define AUTO_DEC 0
-#define CURSOR_FOLLOWS_DISP (1 << 0)
-
-static void pvc_entrymode(u8 cmd)
-{
- pvc_write(ENTRYMODE_CMD | (cmd & (AUTO_INC|CURSOR_FOLLOWS_DISP)),
- MODE_INST);
-}
-
-#define DISP_CNT_CMD 0x08
-#define DISP_OFF 0
-#define DISP_ON (1 << 2)
-#define CUR_ON (1 << 1)
-#define CUR_BLINK (1 << 0)
-void pvc_dispcnt(u8 cmd)
-{
- pvc_write(DISP_CNT_CMD | (cmd & (DISP_ON|CUR_ON|CUR_BLINK)), MODE_INST);
-}
-
-#define MOVE_CMD 0x10
-#define DISPLAY (1 << 3)
-#define CURSOR 0
-#define RIGHT (1 << 2)
-#define LEFT 0
-void pvc_move(u8 cmd)
-{
- pvc_write(MOVE_CMD | (cmd & (DISPLAY|RIGHT)), MODE_INST);
-}
-
-#define CLEAR_CMD 0x1
-void pvc_clear(void)
-{
- pvc_write(CLEAR_CMD, MODE_INST);
-}
-
-#define HOME_CMD 0x2
-void pvc_home(void)
-{
- pvc_write(HOME_CMD, MODE_INST);
-}
-
-int pvc_init(void)
-{
- u8 cmd = EIGHT_BYTE;
-
- if (PVC_NLINES == 2)
- cmd |= (SMALL_FONT|TWO_LINES);
- else
- cmd |= (LARGE_FONT|ONE_LINE);
- pvc_funcset(cmd);
- pvc_dispcnt(DISP_ON);
- pvc_entrymode(AUTO_INC);
-
- pvc_clear();
- pvc_write_string_centered("Display", 0);
- pvc_write_string_centered("Initialized", 1);
-
- return 0;
-}
-
-module_init(pvc_init);
-MODULE_LICENSE("GPL");
diff --git a/arch/mips/lasat/picvue.h b/arch/mips/lasat/picvue.h
deleted file mode 100644
index 161d3bf50811..000000000000
--- a/arch/mips/lasat/picvue.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Picvue PVC160206 display driver
- *
- * Brian Murphy <brian.murphy@eicon.com>
- *
- */
-struct pvc_defs {
- volatile u32 *reg;
- u32 data_shift;
- u32 data_mask;
- u32 e;
- u32 rw;
- u32 rs;
-};
-
-extern struct pvc_defs *picvue;
-
-#define PVC_NLINES 2
-#define PVC_DISPMEM 80
-#define PVC_LINELEN PVC_DISPMEM / PVC_NLINES
-#define PVC_VISIBLE_CHARS 16
-
-void pvc_write_string(const unsigned char *str, u8 addr, int line);
-void pvc_write_string_centered(const unsigned char *str, int line);
-void pvc_dump_string(const unsigned char *str);
-
-#define BM_SIZE 8
-#define MAX_PROGRAMMABLE_CHARS 8
-int pvc_program_cg(int charnum, u8 bitmap[BM_SIZE]);
-
-void pvc_dispcnt(u8 cmd);
-#define DISP_OFF 0
-#define DISP_ON (1 << 2)
-#define CUR_ON (1 << 1)
-#define CUR_BLINK (1 << 0)
-
-void pvc_move(u8 cmd);
-#define DISPLAY (1 << 3)
-#define CURSOR 0
-#define RIGHT (1 << 2)
-#define LEFT 0
-
-void pvc_clear(void);
-void pvc_home(void);
diff --git a/arch/mips/lasat/picvue_proc.c b/arch/mips/lasat/picvue_proc.c
deleted file mode 100644
index 61c033494af5..000000000000
--- a/arch/mips/lasat/picvue_proc.c
+++ /dev/null
@@ -1,208 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Picvue PVC160206 display driver
- *
- * Brian Murphy <brian.murphy@eicon.com>
- *
- */
-#include <linux/bug.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/interrupt.h>
-
-#include <linux/timer.h>
-#include <linux/mutex.h>
-#include <linux/uaccess.h>
-
-#include "picvue.h"
-
-static DEFINE_MUTEX(pvc_mutex);
-static char pvc_lines[PVC_NLINES][PVC_LINELEN+1];
-static int pvc_linedata[PVC_NLINES];
-static char *pvc_linename[PVC_NLINES] = {"line1", "line2"};
-#define DISPLAY_DIR_NAME "display"
-static int scroll_dir, scroll_interval;
-
-static struct timer_list timer;
-
-static void pvc_display(unsigned long data)
-{
- int i;
-
- pvc_clear();
- for (i = 0; i < PVC_NLINES; i++)
- pvc_write_string(pvc_lines[i], 0, i);
-}
-
-static DECLARE_TASKLET(pvc_display_tasklet, &pvc_display, 0);
-
-static int pvc_line_proc_show(struct seq_file *m, void *v)
-{
- int lineno = *(int *)m->private;
-
- if (lineno < 0 || lineno >= PVC_NLINES) {
- printk(KERN_WARNING "proc_read_line: invalid lineno %d\n", lineno);
- return 0;
- }
-
- mutex_lock(&pvc_mutex);
- seq_printf(m, "%s\n", pvc_lines[lineno]);
- mutex_unlock(&pvc_mutex);
-
- return 0;
-}
-
-static int pvc_line_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, pvc_line_proc_show, PDE_DATA(inode));
-}
-
-static ssize_t pvc_line_proc_write(struct file *file, const char __user *buf,
- size_t count, loff_t *pos)
-{
- int lineno = *(int *)PDE_DATA(file_inode(file));
- char kbuf[PVC_LINELEN];
- size_t len;
-
- BUG_ON(lineno < 0 || lineno >= PVC_NLINES);
-
- len = min(count, sizeof(kbuf) - 1);
- if (copy_from_user(kbuf, buf, len))
- return -EFAULT;
- kbuf[len] = '\0';
-
- if (len > 0 && kbuf[len - 1] == '\n')
- len--;
-
- mutex_lock(&pvc_mutex);
- strncpy(pvc_lines[lineno], kbuf, len);
- pvc_lines[lineno][len] = '\0';
- mutex_unlock(&pvc_mutex);
-
- tasklet_schedule(&pvc_display_tasklet);
-
- return count;
-}
-
-static const struct proc_ops pvc_line_proc_ops = {
- .proc_open = pvc_line_proc_open,
- .proc_read = seq_read,
- .proc_lseek = seq_lseek,
- .proc_release = single_release,
- .proc_write = pvc_line_proc_write,
-};
-
-static ssize_t pvc_scroll_proc_write(struct file *file, const char __user *buf,
- size_t count, loff_t *pos)
-{
- char kbuf[42];
- size_t len;
- int cmd;
-
- len = min(count, sizeof(kbuf) - 1);
- if (copy_from_user(kbuf, buf, len))
- return -EFAULT;
- kbuf[len] = '\0';
-
- cmd = simple_strtol(kbuf, NULL, 10);
-
- mutex_lock(&pvc_mutex);
- if (scroll_interval != 0)
- del_timer(&timer);
-
- if (cmd == 0) {
- scroll_dir = 0;
- scroll_interval = 0;
- } else {
- if (cmd < 0) {
- scroll_dir = -1;
- scroll_interval = -cmd;
- } else {
- scroll_dir = 1;
- scroll_interval = cmd;
- }
- add_timer(&timer);
- }
- mutex_unlock(&pvc_mutex);
-
- return count;
-}
-
-static int pvc_scroll_proc_show(struct seq_file *m, void *v)
-{
- mutex_lock(&pvc_mutex);
- seq_printf(m, "%d\n", scroll_dir * scroll_interval);
- mutex_unlock(&pvc_mutex);
-
- return 0;
-}
-
-static int pvc_scroll_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, pvc_scroll_proc_show, NULL);
-}
-
-static const struct proc_ops pvc_scroll_proc_ops = {
- .proc_open = pvc_scroll_proc_open,
- .proc_read = seq_read,
- .proc_lseek = seq_lseek,
- .proc_release = single_release,
- .proc_write = pvc_scroll_proc_write,
-};
-
-void pvc_proc_timerfunc(struct timer_list *unused)
-{
- if (scroll_dir < 0)
- pvc_move(DISPLAY|RIGHT);
- else if (scroll_dir > 0)
- pvc_move(DISPLAY|LEFT);
-
- timer.expires = jiffies + scroll_interval;
- add_timer(&timer);
-}
-
-static void pvc_proc_cleanup(void)
-{
- remove_proc_subtree(DISPLAY_DIR_NAME, NULL);
- del_timer_sync(&timer);
-}
-
-static int __init pvc_proc_init(void)
-{
- struct proc_dir_entry *dir, *proc_entry;
- int i;
-
- dir = proc_mkdir(DISPLAY_DIR_NAME, NULL);
- if (dir == NULL)
- goto error;
-
- for (i = 0; i < PVC_NLINES; i++) {
- strcpy(pvc_lines[i], "");
- pvc_linedata[i] = i;
- }
- for (i = 0; i < PVC_NLINES; i++) {
- proc_entry = proc_create_data(pvc_linename[i], 0644, dir,
- &pvc_line_proc_ops, &pvc_linedata[i]);
- if (proc_entry == NULL)
- goto error;
- }
- proc_entry = proc_create("scroll", 0644, dir, &pvc_scroll_proc_ops);
- if (proc_entry == NULL)
- goto error;
-
- timer_setup(&timer, pvc_proc_timerfunc, 0);
-
- return 0;
-error:
- pvc_proc_cleanup();
- return -ENOMEM;
-}
-
-module_init(pvc_proc_init);
-module_exit(pvc_proc_cleanup);
-MODULE_LICENSE("GPL");
diff --git a/arch/mips/lasat/prom.c b/arch/mips/lasat/prom.c
deleted file mode 100644
index 5ce1407de2d5..000000000000
--- a/arch/mips/lasat/prom.c
+++ /dev/null
@@ -1,126 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * PROM interface routines.
- */
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/memblock.h>
-#include <linux/ioport.h>
-#include <asm/bootinfo.h>
-#include <asm/lasat/lasat.h>
-#include <asm/cpu.h>
-#include <asm/setup.h>
-
-#include "at93c.h"
-#include <asm/lasat/eeprom.h>
-#include "prom.h"
-
-#define RESET_VECTOR 0xbfc00000
-#define PROM_JUMP_TABLE_ENTRY(n) (*((u32 *)(RESET_VECTOR + 0x20) + n))
-#define PROM_DISPLAY_ADDR PROM_JUMP_TABLE_ENTRY(0)
-#define PROM_PUTC_ADDR PROM_JUMP_TABLE_ENTRY(1)
-#define PROM_MONITOR_ADDR PROM_JUMP_TABLE_ENTRY(2)
-
-static void null_prom_display(const char *string, int pos, int clear)
-{
-}
-
-static void null_prom_monitor(void)
-{
-}
-
-static void null_prom_putc(char c)
-{
-}
-
-/* these are functions provided by the bootloader */
-static void (*__prom_putc)(char c) = null_prom_putc;
-
-void prom_putchar(char c)
-{
- __prom_putc(c);
-}
-
-void (*prom_display)(const char *string, int pos, int clear) =
- null_prom_display;
-void (*prom_monitor)(void) = null_prom_monitor;
-
-unsigned int lasat_ndelay_divider;
-
-static void setup_prom_vectors(void)
-{
- u32 version = *(u32 *)(RESET_VECTOR + 0x90);
-
- if (version >= 307) {
- prom_display = (void *)PROM_DISPLAY_ADDR;
- __prom_putc = (void *)PROM_PUTC_ADDR;
- prom_monitor = (void *)PROM_MONITOR_ADDR;
- }
- printk(KERN_DEBUG "prom vectors set up\n");
-}
-
-static struct at93c_defs at93c_defs[N_MACHTYPES] = {
- {
- .reg = (void *)AT93C_REG_100,
- .rdata_reg = (void *)AT93C_RDATA_REG_100,
- .rdata_shift = AT93C_RDATA_SHIFT_100,
- .wdata_shift = AT93C_WDATA_SHIFT_100,
- .cs = AT93C_CS_M_100,
- .clk = AT93C_CLK_M_100
- }, {
- .reg = (void *)AT93C_REG_200,
- .rdata_reg = (void *)AT93C_RDATA_REG_200,
- .rdata_shift = AT93C_RDATA_SHIFT_200,
- .wdata_shift = AT93C_WDATA_SHIFT_200,
- .cs = AT93C_CS_M_200,
- .clk = AT93C_CLK_M_200
- },
-};
-
-void __init prom_init(void)
-{
- int argc = fw_arg0;
- char **argv = (char **) fw_arg1;
-
- setup_prom_vectors();
-
- if (IS_LASAT_200()) {
- printk(KERN_INFO "LASAT 200 board\n");
- lasat_ndelay_divider = LASAT_200_DIVIDER;
- at93c = &at93c_defs[1];
- } else {
- printk(KERN_INFO "LASAT 100 board\n");
- lasat_ndelay_divider = LASAT_100_DIVIDER;
- at93c = &at93c_defs[0];
- }
-
- lasat_init_board_info(); /* Read info from EEPROM */
-
- /* Get the command line */
- if (argc > 0) {
- strncpy(arcs_cmdline, argv[0], COMMAND_LINE_SIZE-1);
- arcs_cmdline[COMMAND_LINE_SIZE-1] = '\0';
- }
-
- /* Set the I/O base address */
- set_io_port_base(KSEG1);
-
- /* Set memory regions */
- ioport_resource.start = 0;
- ioport_resource.end = 0xffffffff; /* Wrong, fixme. */
-
- add_memory_region(0, lasat_board_info.li_memsize, BOOT_MEM_RAM);
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-const char *get_system_type(void)
-{
- return lasat_board_info.li_bmstr;
-}
diff --git a/arch/mips/lasat/prom.h b/arch/mips/lasat/prom.h
deleted file mode 100644
index 3d1df853e9d3..000000000000
--- a/arch/mips/lasat/prom.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __PROM_H
-#define __PROM_H
-
-extern void (*prom_display)(const char *string, int pos, int clear);
-extern void (*prom_monitor)(void);
-
-#endif /* __PROM_H */
diff --git a/arch/mips/lasat/reset.c b/arch/mips/lasat/reset.c
deleted file mode 100644
index 7c516ed9af15..000000000000
--- a/arch/mips/lasat/reset.c
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Thomas Horsten <thh@lasat.com>
- * Copyright (C) 2000 LASAT Networks A/S.
- *
- * Reset the LASAT board.
- */
-#include <linux/kernel.h>
-#include <linux/pm.h>
-
-#include <asm/reboot.h>
-#include <asm/lasat/lasat.h>
-
-#include "picvue.h"
-#include "prom.h"
-
-static void lasat_machine_restart(char *command);
-static void lasat_machine_halt(void);
-
-/* Used to set machine to boot in service mode via /proc interface */
-int lasat_boot_to_service;
-
-static void lasat_machine_restart(char *command)
-{
- local_irq_disable();
-
- if (lasat_boot_to_service) {
- *(volatile unsigned int *)0xa0000024 = 0xdeadbeef;
- *(volatile unsigned int *)0xa00000fc = 0xfedeabba;
- }
- *lasat_misc->reset_reg = 0xbedead;
- for (;;) ;
-}
-
-static void lasat_machine_halt(void)
-{
- local_irq_disable();
-
- prom_monitor();
- for (;;) ;
-}
-
-void lasat_reboot_setup(void)
-{
- _machine_restart = lasat_machine_restart;
- _machine_halt = lasat_machine_halt;
- pm_power_off = lasat_machine_halt;
-}
diff --git a/arch/mips/lasat/serial.c b/arch/mips/lasat/serial.c
deleted file mode 100644
index 16b242713420..000000000000
--- a/arch/mips/lasat/serial.c
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Registration of Lasat UART platform device.
- *
- * Copyright (C) 2007 Brian Murphy <brian@murphy.dk>
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-
-#include <asm/lasat/lasat.h>
-#include <asm/lasat/serial.h>
-
-static struct resource lasat_serial_res[2] __initdata;
-
-static struct plat_serial8250_port lasat_serial8250_port[] = {
- {
- .iotype = UPIO_MEM,
- .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF |
- UPF_SKIP_TEST,
- },
- {},
-};
-
-static __init int lasat_uart_add(void)
-{
- struct platform_device *pdev;
- int retval;
-
- pdev = platform_device_alloc("serial8250", -1);
- if (!pdev)
- return -ENOMEM;
-
- if (!IS_LASAT_200()) {
- lasat_serial_res[0].start = KSEG1ADDR(LASAT_UART_REGS_BASE_100);
- lasat_serial_res[0].end = lasat_serial_res[0].start + LASAT_UART_REGS_SHIFT_100 * 8 - 1;
- lasat_serial_res[0].flags = IORESOURCE_MEM;
- lasat_serial_res[1].start = LASATINT_UART_100;
- lasat_serial_res[1].end = LASATINT_UART_100;
- lasat_serial_res[1].flags = IORESOURCE_IRQ;
-
- lasat_serial8250_port[0].mapbase = LASAT_UART_REGS_BASE_100;
- lasat_serial8250_port[0].uartclk = LASAT_BASE_BAUD_100 * 16;
- lasat_serial8250_port[0].regshift = LASAT_UART_REGS_SHIFT_100;
- lasat_serial8250_port[0].irq = LASATINT_UART_100;
- } else {
- lasat_serial_res[0].start = KSEG1ADDR(LASAT_UART_REGS_BASE_200);
- lasat_serial_res[0].end = lasat_serial_res[0].start + LASAT_UART_REGS_SHIFT_200 * 8 - 1;
- lasat_serial_res[0].flags = IORESOURCE_MEM;
- lasat_serial_res[1].start = LASATINT_UART_200;
- lasat_serial_res[1].end = LASATINT_UART_200;
- lasat_serial_res[1].flags = IORESOURCE_IRQ;
-
- lasat_serial8250_port[0].mapbase = LASAT_UART_REGS_BASE_200;
- lasat_serial8250_port[0].uartclk = LASAT_BASE_BAUD_200 * 16;
- lasat_serial8250_port[0].regshift = LASAT_UART_REGS_SHIFT_200;
- lasat_serial8250_port[0].irq = LASATINT_UART_200;
- }
-
- pdev->id = PLAT8250_DEV_PLATFORM;
- pdev->dev.platform_data = lasat_serial8250_port;
-
- retval = platform_device_add_resources(pdev, lasat_serial_res, ARRAY_SIZE(lasat_serial_res));
- if (retval)
- goto err_free_device;
-
- retval = platform_device_add(pdev);
- if (retval)
- goto err_free_device;
-
- return 0;
-
-err_free_device:
- platform_device_put(pdev);
-
- return retval;
-}
-device_initcall(lasat_uart_add);
diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
deleted file mode 100644
index 0743243fd86d..000000000000
--- a/arch/mips/lasat/setup.c
+++ /dev/null
@@ -1,141 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999 MIPS Technologies, Inc. All rights reserved.
- *
- * Thomas Horsten <thh@lasat.com>
- * Copyright (C) 2000 LASAT Networks A/S.
- *
- * Brian Murphy <brian@murphy.dk>
- *
- * Lasat specific setup.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-
-#include <asm/time.h>
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/lasat/lasat.h>
-#include <asm/lasat/serial.h>
-
-#ifdef CONFIG_PICVUE
-#include <linux/notifier.h>
-#endif
-
-#include "ds1603.h"
-#include <asm/lasat/ds1603.h>
-#include <asm/lasat/picvue.h>
-#include <asm/lasat/eeprom.h>
-
-#include "prom.h"
-
-int lasat_command_line;
-void lasatint_init(void);
-
-extern void lasat_reboot_setup(void);
-extern void pcisetup(void);
-extern void edhac_init(void *, void *, void *);
-extern void addrflt_init(void);
-
-struct lasat_misc lasat_misc_info[N_MACHTYPES] = {
- {
- .reset_reg = (void *)KSEG1ADDR(0x1c840000),
- .flash_wp_reg = (void *)KSEG1ADDR(0x1c800000), 2
- }, {
- .reset_reg = (void *)KSEG1ADDR(0x11080000),
- .flash_wp_reg = (void *)KSEG1ADDR(0x11000000), 6
- }
-};
-
-struct lasat_misc *lasat_misc;
-
-#ifdef CONFIG_DS1603
-static struct ds_defs ds_defs[N_MACHTYPES] = {
- { (void *)DS1603_REG_100, (void *)DS1603_REG_100,
- DS1603_RST_100, DS1603_CLK_100, DS1603_DATA_100,
- DS1603_DATA_SHIFT_100, 0, 0 },
- { (void *)DS1603_REG_200, (void *)DS1603_DATA_REG_200,
- DS1603_RST_200, DS1603_CLK_200, DS1603_DATA_200,
- DS1603_DATA_READ_SHIFT_200, 1, 2000 }
-};
-#endif
-
-#ifdef CONFIG_PICVUE
-#include "picvue.h"
-static struct pvc_defs pvc_defs[N_MACHTYPES] = {
- { (void *)PVC_REG_100, PVC_DATA_SHIFT_100, PVC_DATA_M_100,
- PVC_E_100, PVC_RW_100, PVC_RS_100 },
- { (void *)PVC_REG_200, PVC_DATA_SHIFT_200, PVC_DATA_M_200,
- PVC_E_200, PVC_RW_200, PVC_RS_200 }
-};
-#endif
-
-static int lasat_panic_display(struct notifier_block *this,
- unsigned long event, void *ptr)
-{
-#ifdef CONFIG_PICVUE
- unsigned char *string = ptr;
- if (string == NULL)
- string = "Kernel Panic";
- pvc_dump_string(string);
-#endif
- return NOTIFY_DONE;
-}
-
-static int lasat_panic_prom_monitor(struct notifier_block *this,
- unsigned long event, void *ptr)
-{
- prom_monitor();
- return NOTIFY_DONE;
-}
-
-static struct notifier_block lasat_panic_block[] =
-{
- {
- .notifier_call = lasat_panic_display,
- .priority = INT_MAX
- }, {
- .notifier_call = lasat_panic_prom_monitor,
- .priority = INT_MIN
- }
-};
-
-void __init plat_time_init(void)
-{
- mips_hpt_frequency = lasat_board_info.li_cpu_hz / 2;
-
- change_c0_status(ST0_IM, IE_IRQ0);
-}
-
-void __init plat_mem_setup(void)
-{
- int i;
- int lasat_type = IS_LASAT_200() ? 1 : 0;
-
- lasat_misc = &lasat_misc_info[lasat_type];
-#ifdef CONFIG_PICVUE
- picvue = &pvc_defs[lasat_type];
-#endif
-
- /* Set up panic notifier */
- for (i = 0; i < ARRAY_SIZE(lasat_panic_block); i++)
- atomic_notifier_chain_register(&panic_notifier_list,
- &lasat_panic_block[i]);
-
- lasat_reboot_setup();
-
-#ifdef CONFIG_DS1603
- ds1603 = &ds_defs[lasat_type];
-#endif
-
-#ifdef DYNAMIC_SERIAL_INIT
- serial_init();
-#endif
-
- pr_info("Lasat specific initialization complete\n");
-}
diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c
deleted file mode 100644
index e666fe26c50d..000000000000
--- a/arch/mips/lasat/sysctl.c
+++ /dev/null
@@ -1,268 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Thomas Horsten <thh@lasat.com>
- * Copyright (C) 2000 LASAT Networks A/S.
- *
- * Routines specific to the LASAT boards
- */
-#include <linux/types.h>
-#include <asm/lasat/lasat.h>
-
-#include <linux/sysctl.h>
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/ctype.h>
-#include <linux/string.h>
-#include <linux/net.h>
-#include <linux/inet.h>
-#include <linux/uaccess.h>
-
-#include <asm/time.h>
-
-#ifdef CONFIG_DS1603
-#include "ds1603.h"
-#endif
-
-
-/* And the same for proc */
-int proc_dolasatstring(struct ctl_table *table, int write,
- void *buffer, size_t *lenp, loff_t *ppos)
-{
- int r;
-
- r = proc_dostring(table, write, buffer, lenp, ppos);
- if ((!write) || r)
- return r;
-
- lasat_write_eeprom_info();
-
- return 0;
-}
-
-#ifdef CONFIG_DS1603
-static int rtctmp;
-
-/* proc function to read/write RealTime Clock */
-int proc_dolasatrtc(struct ctl_table *table, int write,
- void *buffer, size_t *lenp, loff_t *ppos)
-{
- struct timespec64 ts;
- int r;
-
- if (!write) {
- read_persistent_clock64(&ts);
- rtctmp = ts.tv_sec;
- /* check for time < 0 and set to 0 */
- if (rtctmp < 0)
- rtctmp = 0;
- }
- r = proc_dointvec(table, write, buffer, lenp, ppos);
- if (r)
- return r;
-
- if (write) {
- /*
- * Due to the RTC hardware limitation, we can not actually
- * use the full 64-bit range here.
- */
- ts.tv_sec = rtctmp;
- ts.tv_nsec = 0;
-
- update_persistent_clock64(ts);
- }
-
- return 0;
-}
-#endif
-
-#ifdef CONFIG_INET
-int proc_lasat_ip(struct ctl_table *table, int write,
- void *buffer, size_t *lenp, loff_t *ppos)
-{
- unsigned int ip;
- char *p, c;
- int len;
- char ipbuf[32];
-
- if (!table->data || !table->maxlen || !*lenp ||
- (*ppos && !write)) {
- *lenp = 0;
- return 0;
- }
-
- if (write) {
- len = 0;
- p = buffer;
- while (len < *lenp) {
- if (get_user(c, p++))
- return -EFAULT;
- if (c == 0 || c == '\n')
- break;
- len++;
- }
- if (len >= sizeof(ipbuf)-1)
- len = sizeof(ipbuf) - 1;
- if (copy_from_user(ipbuf, buffer, len))
- return -EFAULT;
- ipbuf[len] = 0;
- *ppos += *lenp;
- /* Now see if we can convert it to a valid IP */
- ip = in_aton(ipbuf);
- *(unsigned int *)(table->data) = ip;
- lasat_write_eeprom_info();
- } else {
- ip = *(unsigned int *)(table->data);
- sprintf(ipbuf, "%d.%d.%d.%d",
- (ip) & 0xff,
- (ip >> 8) & 0xff,
- (ip >> 16) & 0xff,
- (ip >> 24) & 0xff);
- len = strlen(ipbuf);
- if (len > *lenp)
- len = *lenp;
- if (len)
- if (copy_to_user(buffer, ipbuf, len))
- return -EFAULT;
- if (len < *lenp) {
- if (put_user('\n', ((char *) buffer) + len))
- return -EFAULT;
- len++;
- }
- *lenp = len;
- *ppos += len;
- }
-
- return 0;
-}
-#endif
-
-int proc_lasat_prid(struct ctl_table *table, int write,
- void *buffer, size_t *lenp, loff_t *ppos)
-{
- int r;
-
- r = proc_dointvec(table, write, buffer, lenp, ppos);
- if (r < 0)
- return r;
- if (write) {
- lasat_board_info.li_eeprom_info.prid =
- lasat_board_info.li_prid;
- lasat_write_eeprom_info();
- lasat_init_board_info();
- }
- return 0;
-}
-
-extern int lasat_boot_to_service;
-
-static struct ctl_table lasat_table[] = {
- {
- .procname = "cpu-hz",
- .data = &lasat_board_info.li_cpu_hz,
- .maxlen = sizeof(int),
- .mode = 0444,
- .proc_handler = proc_dointvec,
- },
- {
- .procname = "bus-hz",
- .data = &lasat_board_info.li_bus_hz,
- .maxlen = sizeof(int),
- .mode = 0444,
- .proc_handler = proc_dointvec,
- },
- {
- .procname = "bmid",
- .data = &lasat_board_info.li_bmid,
- .maxlen = sizeof(int),
- .mode = 0444,
- .proc_handler = proc_dointvec,
- },
- {
- .procname = "prid",
- .data = &lasat_board_info.li_prid,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = proc_lasat_prid,
- },
-#ifdef CONFIG_INET
- {
- .procname = "ipaddr",
- .data = &lasat_board_info.li_eeprom_info.ipaddr,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = proc_lasat_ip,
- },
- {
- .procname = "netmask",
- .data = &lasat_board_info.li_eeprom_info.netmask,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = proc_lasat_ip,
- },
-#endif
- {
- .procname = "passwd_hash",
- .data = &lasat_board_info.li_eeprom_info.passwd_hash,
- .maxlen =
- sizeof(lasat_board_info.li_eeprom_info.passwd_hash),
- .mode = 0600,
- .proc_handler = proc_dolasatstring,
- },
- {
- .procname = "boot-service",
- .data = &lasat_boot_to_service,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = proc_dointvec,
- },
-#ifdef CONFIG_DS1603
- {
- .procname = "rtc",
- .data = &rtctmp,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = proc_dolasatrtc,
- },
-#endif
- {
- .procname = "namestr",
- .data = &lasat_board_info.li_namestr,
- .maxlen = sizeof(lasat_board_info.li_namestr),
- .mode = 0444,
- .proc_handler = proc_dostring,
- },
- {
- .procname = "typestr",
- .data = &lasat_board_info.li_typestr,
- .maxlen = sizeof(lasat_board_info.li_typestr),
- .mode = 0444,
- .proc_handler = proc_dostring,
- },
- {}
-};
-
-static struct ctl_table lasat_root_table[] = {
- {
- .procname = "lasat",
- .mode = 0555,
- .child = lasat_table
- },
- {}
-};
-
-static int __init lasat_register_sysctl(void)
-{
- struct ctl_table_header *lasat_table_header;
-
- lasat_table_header =
- register_sysctl_table(lasat_root_table);
- if (!lasat_table_header) {
- printk(KERN_ERR "Unable to register LASAT sysctl\n");
- return -ENOMEM;
- }
-
- return 0;
-}
-
-arch_initcall(lasat_register_sysctl);
diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S
index fda7b57b826e..87fda0713b84 100644
--- a/arch/mips/lib/csum_partial.S
+++ b/arch/mips/lib/csum_partial.S
@@ -279,7 +279,8 @@ EXPORT_SYMBOL(csum_partial)
#endif
/* odd buffer alignment? */
-#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_LOONGSON64)
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \
+ defined(CONFIG_CPU_LOONGSON64)
.set push
.set arch=mips32r2
wsbh v1, sum
@@ -732,7 +733,8 @@ EXPORT_SYMBOL(csum_partial)
addu sum, v1
#endif
-#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_LOONGSON64)
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \
+ defined(CONFIG_CPU_LOONGSON64)
.set push
.set arch=mips32r2
wsbh v1, sum
diff --git a/arch/mips/loongson2ef/Kconfig b/arch/mips/loongson2ef/Kconfig
index 595dd48e1e4d..96dc6eba4310 100644
--- a/arch/mips/loongson2ef/Kconfig
+++ b/arch/mips/loongson2ef/Kconfig
@@ -46,7 +46,6 @@ config LEMOTE_MACH2F
select CSRC_R4K if ! MIPS_EXTERNAL_TIMER
select DMA_NONCOHERENT
select GENERIC_ISA_DMA_SUPPORT_BROKEN
- select HAVE_CLK
select FORCE_PCI
select I8259
select IRQ_MIPS_CPU
diff --git a/arch/mips/loongson2ef/Platform b/arch/mips/loongson2ef/Platform
index 3aca42963f35..cdad3c1a9a18 100644
--- a/arch/mips/loongson2ef/Platform
+++ b/arch/mips/loongson2ef/Platform
@@ -26,7 +26,6 @@ endif
# Loongson Machines' Support
#
-platform-$(CONFIG_MACH_LOONGSON2EF) += loongson2ef/
cflags-$(CONFIG_MACH_LOONGSON2EF) += -I$(srctree)/arch/mips/include/asm/mach-loongson2ef -mno-branch-likely
load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000
load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000
diff --git a/arch/mips/loongson2ef/common/init.c b/arch/mips/loongson2ef/common/init.c
index 45512178be77..ce3f02f75e2a 100644
--- a/arch/mips/loongson2ef/common/init.c
+++ b/arch/mips/loongson2ef/common/init.c
@@ -19,10 +19,10 @@ unsigned long __maybe_unused _loongson_addrwincfg_base;
static void __init mips_nmi_setup(void)
{
void *base;
- extern char except_vec_nmi;
+ extern char except_vec_nmi[];
base = (void *)(CAC_BASE + 0x380);
- memcpy(base, &except_vec_nmi, 0x80);
+ memcpy(base, except_vec_nmi, 0x80);
flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
}
diff --git a/arch/mips/loongson2ef/lemote-2f/clock.c b/arch/mips/loongson2ef/lemote-2f/clock.c
index 414f282c8ab5..850b6b9f8f15 100644
--- a/arch/mips/loongson2ef/lemote-2f/clock.c
+++ b/arch/mips/loongson2ef/lemote-2f/clock.c
@@ -6,22 +6,12 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
-#include <linux/clk.h>
#include <linux/cpufreq.h>
#include <linux/errno.h>
#include <linux/export.h>
-#include <linux/list.h>
-#include <linux/mutex.h>
-#include <linux/spinlock.h>
-#include <asm/clock.h>
#include <asm/mach-loongson2ef/loongson.h>
-static LIST_HEAD(clock_list);
-static DEFINE_SPINLOCK(clock_lock);
-static DEFINE_MUTEX(clock_list_sem);
-
-/* Minimum CLK support */
enum {
DC_ZERO, DC_25PT = 2, DC_37PT, DC_50PT, DC_62PT, DC_75PT,
DC_87PT, DC_DISABLE, DC_RESV
@@ -41,103 +31,21 @@ struct cpufreq_frequency_table loongson2_clockmod_table[] = {
};
EXPORT_SYMBOL_GPL(loongson2_clockmod_table);
-static struct clk cpu_clk = {
- .name = "cpu_clk",
- .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES,
- .rate = 800000000,
-};
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
- return &cpu_clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-static void propagate_rate(struct clk *clk)
-{
- struct clk *clkp;
-
- list_for_each_entry(clkp, &clock_list, node) {
- if (likely(clkp->parent != clk))
- continue;
- if (likely(clkp->ops && clkp->ops->recalc))
- clkp->ops->recalc(clkp);
- if (unlikely(clkp->flags & CLK_RATE_PROPAGATES))
- propagate_rate(clkp);
- }
-}
-
-int clk_enable(struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
+int loongson2_cpu_set_rate(unsigned long rate_khz)
{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- if (!clk)
- return 0;
-
- return (unsigned long)clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int rate_khz = rate / 1000;
struct cpufreq_frequency_table *pos;
- int ret = 0;
int regval;
- if (likely(clk->ops && clk->ops->set_rate)) {
- unsigned long flags;
-
- spin_lock_irqsave(&clock_lock, flags);
- ret = clk->ops->set_rate(clk, rate, 0);
- spin_unlock_irqrestore(&clock_lock, flags);
- }
-
- if (unlikely(clk->flags & CLK_RATE_PROPAGATES))
- propagate_rate(clk);
-
cpufreq_for_each_valid_entry(pos, loongson2_clockmod_table)
if (rate_khz == pos->frequency)
break;
if (rate_khz != pos->frequency)
return -ENOTSUPP;
- clk->rate = rate;
-
regval = readl(LOONGSON_CHIPCFG);
regval = (regval & ~0x7) | (pos->driver_data - 1);
writel(regval, LOONGSON_CHIPCFG);
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (likely(clk->ops && clk->ops->round_rate)) {
- unsigned long flags, rounded;
-
- spin_lock_irqsave(&clock_lock, flags);
- rounded = clk->ops->round_rate(clk, rate);
- spin_unlock_irqrestore(&clock_lock, flags);
-
- return rounded;
- }
-
- return rate;
+ return 0;
}
-EXPORT_SYMBOL_GPL(clk_round_rate);
+EXPORT_SYMBOL_GPL(loongson2_cpu_set_rate);
diff --git a/arch/mips/loongson32/Platform b/arch/mips/loongson32/Platform
index 7f8e342f1ef5..3b9673e7a2fa 100644
--- a/arch/mips/loongson32/Platform
+++ b/arch/mips/loongson32/Platform
@@ -1,4 +1,3 @@
cflags-$(CONFIG_CPU_LOONGSON32) += -march=mips32r2 -Wa,--trap
-platform-$(CONFIG_MACH_LOONGSON32) += loongson32/
cflags-$(CONFIG_MACH_LOONGSON32) += -I$(srctree)/arch/mips/include/asm/mach-loongson32
load-$(CONFIG_CPU_LOONGSON32) += 0xffffffff80200000
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
index 48b29c198acf..517f1f8e81fb 100644
--- a/arch/mips/loongson64/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -4,18 +4,12 @@ if MACH_LOONGSON64
config RS780_HPET
bool "RS780/SBX00 HPET Timer"
depends on MACH_LOONGSON64
+ depends on BROKEN
select MIPS_EXTERNAL_TIMER
help
This option enables the hpet timer of AMD RS780/SBX00.
- If you want to enable the Loongson3 CPUFreq Driver, Please enable
- this option at first, otherwise, You will get wrong system time.
-
- If unsure, say Yes.
-
-
-config LOONGSON_MC146818
- bool
- default n
+ Note: This driver is doing some dangerous hack. Please only enable
+ it on RS780E systems.
endif # MACH_LOONGSON64
diff --git a/arch/mips/loongson64/Makefile b/arch/mips/loongson64/Makefile
index b7f40b179c71..39c06f52b08f 100644
--- a/arch/mips/loongson64/Makefile
+++ b/arch/mips/loongson64/Makefile
@@ -2,12 +2,12 @@
#
# Makefile for Loongson-3 family machines
#
-obj-$(CONFIG_MACH_LOONGSON64) += cop2-ex.o platform.o acpi_init.o dma.o \
+obj-$(CONFIG_MACH_LOONGSON64) += cop2-ex.o platform.o dma.o \
setup.o init.o env.o time.o reset.o \
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_NUMA) += numa.o
obj-$(CONFIG_RS780_HPET) += hpet.o
-obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_LOONGSON_MC146818) += rtc.o
obj-$(CONFIG_SUSPEND) += pm.o
+obj-$(CONFIG_PCI_QUIRKS) += vbios_quirk.o
+obj-$(CONFIG_CPU_LOONGSON3_CPUCFG_EMULATION) += cpucfg-emul.o
diff --git a/arch/mips/loongson64/Platform b/arch/mips/loongson64/Platform
index d5eb94c9edb4..ec42c5085905 100644
--- a/arch/mips/loongson64/Platform
+++ b/arch/mips/loongson64/Platform
@@ -55,6 +55,5 @@ cflags-y += $(call cc-option,-mno-loongson-mmi)
# Loongson Machines' Support
#
-platform-$(CONFIG_MACH_LOONGSON64) += loongson64/
cflags-$(CONFIG_MACH_LOONGSON64) += -I$(srctree)/arch/mips/include/asm/mach-loongson64 -mno-branch-likely
load-$(CONFIG_CPU_LOONGSON64) += 0xffffffff80200000
diff --git a/arch/mips/loongson64/cop2-ex.c b/arch/mips/loongson64/cop2-ex.c
index 9efdfe430ff0..f130f62129b8 100644
--- a/arch/mips/loongson64/cop2-ex.c
+++ b/arch/mips/loongson64/cop2-ex.c
@@ -14,17 +14,30 @@
#include <linux/sched.h>
#include <linux/notifier.h>
#include <linux/ptrace.h>
+#include <linux/uaccess.h>
+#include <linux/sched/signal.h>
#include <asm/fpu.h>
#include <asm/cop2.h>
+#include <asm/inst.h>
+#include <asm/branch.h>
#include <asm/current.h>
#include <asm/mipsregs.h>
+#include <asm/unaligned-emul.h>
static int loongson_cu2_call(struct notifier_block *nfb, unsigned long action,
void *data)
{
- int fpu_owned;
+ unsigned int res, fpu_owned;
+ unsigned long ra, value, value_next;
+ union mips_instruction insn;
int fr = !test_thread_flag(TIF_32BIT_FPREGS);
+ struct pt_regs *regs = (struct pt_regs *)data;
+ void __user *addr = (void __user *)regs->cp0_badvaddr;
+ unsigned int __user *pc = (unsigned int __user *)exception_epc(regs);
+
+ ra = regs->regs[31];
+ __get_user(insn.word, pc);
switch (action) {
case CU2_EXCEPTION:
@@ -49,9 +62,284 @@ static int loongson_cu2_call(struct notifier_block *nfb, unsigned long action,
preempt_enable();
return NOTIFY_STOP; /* Don't call default notifier */
+
+ case CU2_LWC2_OP:
+ if (insn.loongson3_lswc2_format.ls == 0)
+ goto sigbus;
+
+ if (insn.loongson3_lswc2_format.fr == 0) { /* gslq */
+ if (!access_ok(addr, 16))
+ goto sigbus;
+
+ LoadDW(addr, value, res);
+ if (res)
+ goto fault;
+
+ LoadDW(addr + 8, value_next, res);
+ if (res)
+ goto fault;
+
+ regs->regs[insn.loongson3_lswc2_format.rt] = value;
+ regs->regs[insn.loongson3_lswc2_format.rq] = value_next;
+ compute_return_epc(regs);
+ } else { /* gslqc1 */
+ if (!access_ok(addr, 16))
+ goto sigbus;
+
+ lose_fpu(1);
+ LoadDW(addr, value, res);
+ if (res)
+ goto fault;
+
+ LoadDW(addr + 8, value_next, res);
+ if (res)
+ goto fault;
+
+ set_fpr64(current->thread.fpu.fpr,
+ insn.loongson3_lswc2_format.rt, value);
+ set_fpr64(current->thread.fpu.fpr,
+ insn.loongson3_lswc2_format.rq, value_next);
+ compute_return_epc(regs);
+ own_fpu(1);
+ }
+ return NOTIFY_STOP; /* Don't call default notifier */
+
+ case CU2_SWC2_OP:
+ if (insn.loongson3_lswc2_format.ls == 0)
+ goto sigbus;
+
+ if (insn.loongson3_lswc2_format.fr == 0) { /* gssq */
+ if (!access_ok(addr, 16))
+ goto sigbus;
+
+ /* write upper 8 bytes first */
+ value_next = regs->regs[insn.loongson3_lswc2_format.rq];
+
+ StoreDW(addr + 8, value_next, res);
+ if (res)
+ goto fault;
+ value = regs->regs[insn.loongson3_lswc2_format.rt];
+
+ StoreDW(addr, value, res);
+ if (res)
+ goto fault;
+
+ compute_return_epc(regs);
+ } else { /* gssqc1 */
+ if (!access_ok(addr, 16))
+ goto sigbus;
+
+ lose_fpu(1);
+ value_next = get_fpr64(current->thread.fpu.fpr,
+ insn.loongson3_lswc2_format.rq);
+
+ StoreDW(addr + 8, value_next, res);
+ if (res)
+ goto fault;
+
+ value = get_fpr64(current->thread.fpu.fpr,
+ insn.loongson3_lswc2_format.rt);
+
+ StoreDW(addr, value, res);
+ if (res)
+ goto fault;
+
+ compute_return_epc(regs);
+ own_fpu(1);
+ }
+ return NOTIFY_STOP; /* Don't call default notifier */
+
+ case CU2_LDC2_OP:
+ switch (insn.loongson3_lsdc2_format.opcode1) {
+ /*
+ * Loongson-3 overridden ldc2 instructions.
+ * opcode1 instruction
+ * 0x1 gslhx: load 2 bytes to GPR
+ * 0x2 gslwx: load 4 bytes to GPR
+ * 0x3 gsldx: load 8 bytes to GPR
+ * 0x6 gslwxc1: load 4 bytes to FPR
+ * 0x7 gsldxc1: load 8 bytes to FPR
+ */
+ case 0x1:
+ if (!access_ok(addr, 2))
+ goto sigbus;
+
+ LoadHW(addr, value, res);
+ if (res)
+ goto fault;
+
+ compute_return_epc(regs);
+ regs->regs[insn.loongson3_lsdc2_format.rt] = value;
+ break;
+ case 0x2:
+ if (!access_ok(addr, 4))
+ goto sigbus;
+
+ LoadW(addr, value, res);
+ if (res)
+ goto fault;
+
+ compute_return_epc(regs);
+ regs->regs[insn.loongson3_lsdc2_format.rt] = value;
+ break;
+ case 0x3:
+ if (!access_ok(addr, 8))
+ goto sigbus;
+
+ LoadDW(addr, value, res);
+ if (res)
+ goto fault;
+
+ compute_return_epc(regs);
+ regs->regs[insn.loongson3_lsdc2_format.rt] = value;
+ break;
+ case 0x6:
+ die_if_kernel("Unaligned FP access in kernel code", regs);
+ BUG_ON(!used_math());
+ if (!access_ok(addr, 4))
+ goto sigbus;
+
+ lose_fpu(1);
+ LoadW(addr, value, res);
+ if (res)
+ goto fault;
+
+ set_fpr64(current->thread.fpu.fpr,
+ insn.loongson3_lsdc2_format.rt, value);
+ compute_return_epc(regs);
+ own_fpu(1);
+
+ break;
+ case 0x7:
+ die_if_kernel("Unaligned FP access in kernel code", regs);
+ BUG_ON(!used_math());
+ if (!access_ok(addr, 8))
+ goto sigbus;
+
+ lose_fpu(1);
+ LoadDW(addr, value, res);
+ if (res)
+ goto fault;
+
+ set_fpr64(current->thread.fpu.fpr,
+ insn.loongson3_lsdc2_format.rt, value);
+ compute_return_epc(regs);
+ own_fpu(1);
+ break;
+
+ }
+ return NOTIFY_STOP; /* Don't call default notifier */
+
+ case CU2_SDC2_OP:
+ switch (insn.loongson3_lsdc2_format.opcode1) {
+ /*
+ * Loongson-3 overridden sdc2 instructions.
+ * opcode1 instruction
+ * 0x1 gsshx: store 2 bytes from GPR
+ * 0x2 gsswx: store 4 bytes from GPR
+ * 0x3 gssdx: store 8 bytes from GPR
+ * 0x6 gsswxc1: store 4 bytes from FPR
+ * 0x7 gssdxc1: store 8 bytes from FPR
+ */
+ case 0x1:
+ if (!access_ok(addr, 2))
+ goto sigbus;
+
+ compute_return_epc(regs);
+ value = regs->regs[insn.loongson3_lsdc2_format.rt];
+
+ StoreHW(addr, value, res);
+ if (res)
+ goto fault;
+
+ break;
+ case 0x2:
+ if (!access_ok(addr, 4))
+ goto sigbus;
+
+ compute_return_epc(regs);
+ value = regs->regs[insn.loongson3_lsdc2_format.rt];
+
+ StoreW(addr, value, res);
+ if (res)
+ goto fault;
+
+ break;
+ case 0x3:
+ if (!access_ok(addr, 8))
+ goto sigbus;
+
+ compute_return_epc(regs);
+ value = regs->regs[insn.loongson3_lsdc2_format.rt];
+
+ StoreDW(addr, value, res);
+ if (res)
+ goto fault;
+
+ break;
+
+ case 0x6:
+ die_if_kernel("Unaligned FP access in kernel code", regs);
+ BUG_ON(!used_math());
+
+ if (!access_ok(addr, 4))
+ goto sigbus;
+
+ lose_fpu(1);
+ value = get_fpr64(current->thread.fpu.fpr,
+ insn.loongson3_lsdc2_format.rt);
+
+ StoreW(addr, value, res);
+ if (res)
+ goto fault;
+
+ compute_return_epc(regs);
+ own_fpu(1);
+
+ break;
+ case 0x7:
+ die_if_kernel("Unaligned FP access in kernel code", regs);
+ BUG_ON(!used_math());
+
+ if (!access_ok(addr, 8))
+ goto sigbus;
+
+ lose_fpu(1);
+ value = get_fpr64(current->thread.fpu.fpr,
+ insn.loongson3_lsdc2_format.rt);
+
+ StoreDW(addr, value, res);
+ if (res)
+ goto fault;
+
+ compute_return_epc(regs);
+ own_fpu(1);
+
+ break;
+ }
+ return NOTIFY_STOP; /* Don't call default notifier */
}
return NOTIFY_OK; /* Let default notifier send signals */
+
+fault:
+ /* roll back jump/branch */
+ regs->regs[31] = ra;
+ regs->cp0_epc = (unsigned long)pc;
+ /* Did we have an exception handler installed? */
+ if (fixup_exception(regs))
+ return NOTIFY_STOP; /* Don't call default notifier */
+
+ die_if_kernel("Unhandled kernel unaligned access", regs);
+ force_sig(SIGSEGV);
+
+ return NOTIFY_STOP; /* Don't call default notifier */
+
+sigbus:
+ die_if_kernel("Unhandled kernel unaligned access", regs);
+ force_sig(SIGBUS);
+
+ return NOTIFY_STOP; /* Don't call default notifier */
}
static int __init loongson_cu2_setup(void)
diff --git a/arch/mips/loongson64/cpucfg-emul.c b/arch/mips/loongson64/cpucfg-emul.c
new file mode 100644
index 000000000000..cd619b47ba1f
--- /dev/null
+++ b/arch/mips/loongson64/cpucfg-emul.c
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/smp.h>
+#include <linux/types.h>
+#include <asm/cpu.h>
+#include <asm/cpu-info.h>
+#include <asm/elf.h>
+
+#include <loongson_regs.h>
+#include <cpucfg-emul.h>
+
+static bool is_loongson(struct cpuinfo_mips *c)
+{
+ switch (c->processor_id & PRID_COMP_MASK) {
+ case PRID_COMP_LEGACY:
+ return ((c->processor_id & PRID_IMP_MASK) ==
+ PRID_IMP_LOONGSON_64C);
+
+ case PRID_COMP_LOONGSON:
+ return true;
+
+ default:
+ return false;
+ }
+}
+
+static u32 get_loongson_fprev(struct cpuinfo_mips *c)
+{
+ return c->fpu_id & LOONGSON_FPREV_MASK;
+}
+
+static bool cpu_has_uca(void)
+{
+ u32 diag = read_c0_diag();
+ u32 new_diag;
+
+ if (diag & LOONGSON_DIAG_UCAC)
+ /* UCA is already enabled. */
+ return true;
+
+ /* See if UCAC bit can be flipped on. This should be safe. */
+ new_diag = diag | LOONGSON_DIAG_UCAC;
+ write_c0_diag(new_diag);
+ new_diag = read_c0_diag();
+ write_c0_diag(diag);
+
+ return (new_diag & LOONGSON_DIAG_UCAC) != 0;
+}
+
+static void probe_uca(struct cpuinfo_mips *c)
+{
+ if (cpu_has_uca())
+ c->loongson3_cpucfg_data[0] |= LOONGSON_CFG1_LSUCA;
+}
+
+static void decode_loongson_config6(struct cpuinfo_mips *c)
+{
+ u32 config6 = read_c0_config6();
+
+ if (config6 & MIPS_CONF6_LOONGSON_SFBEN)
+ c->loongson3_cpucfg_data[0] |= LOONGSON_CFG1_SFBP;
+ if (config6 & MIPS_CONF6_LOONGSON_LLEXC)
+ c->loongson3_cpucfg_data[0] |= LOONGSON_CFG1_LLEXC;
+ if (config6 & MIPS_CONF6_LOONGSON_SCRAND)
+ c->loongson3_cpucfg_data[0] |= LOONGSON_CFG1_SCRAND;
+}
+
+static void patch_cpucfg_sel1(struct cpuinfo_mips *c)
+{
+ u64 ases = c->ases;
+ u64 options = c->options;
+ u32 data = c->loongson3_cpucfg_data[0];
+
+ if (options & MIPS_CPU_FPU) {
+ data |= LOONGSON_CFG1_FP;
+ data |= get_loongson_fprev(c) << LOONGSON_CFG1_FPREV_OFFSET;
+ }
+ if (ases & MIPS_ASE_LOONGSON_MMI)
+ data |= LOONGSON_CFG1_MMI;
+ if (ases & MIPS_ASE_MSA)
+ data |= LOONGSON_CFG1_MSA1;
+
+ c->loongson3_cpucfg_data[0] = data;
+}
+
+static void patch_cpucfg_sel2(struct cpuinfo_mips *c)
+{
+ u64 ases = c->ases;
+ u64 options = c->options;
+ u32 data = c->loongson3_cpucfg_data[1];
+
+ if (ases & MIPS_ASE_LOONGSON_EXT)
+ data |= LOONGSON_CFG2_LEXT1;
+ if (ases & MIPS_ASE_LOONGSON_EXT2)
+ data |= LOONGSON_CFG2_LEXT2;
+ if (options & MIPS_CPU_LDPTE)
+ data |= LOONGSON_CFG2_LSPW;
+
+ if (ases & MIPS_ASE_VZ)
+ data |= LOONGSON_CFG2_LVZP;
+ else
+ data &= ~LOONGSON_CFG2_LVZREV;
+
+ c->loongson3_cpucfg_data[1] = data;
+}
+
+static void patch_cpucfg_sel3(struct cpuinfo_mips *c)
+{
+ u64 ases = c->ases;
+ u32 data = c->loongson3_cpucfg_data[2];
+
+ if (ases & MIPS_ASE_LOONGSON_CAM) {
+ data |= LOONGSON_CFG3_LCAMP;
+ } else {
+ data &= ~LOONGSON_CFG3_LCAMREV;
+ data &= ~LOONGSON_CFG3_LCAMNUM;
+ data &= ~LOONGSON_CFG3_LCAMKW;
+ data &= ~LOONGSON_CFG3_LCAMVW;
+ }
+
+ c->loongson3_cpucfg_data[2] = data;
+}
+
+void loongson3_cpucfg_synthesize_data(struct cpuinfo_mips *c)
+{
+ /* Only engage the logic on Loongson processors. */
+ if (!is_loongson(c))
+ return;
+
+ /* CPUs with CPUCFG support don't need to synthesize anything. */
+ if (cpu_has_cfg())
+ goto have_cpucfg_now;
+
+ c->loongson3_cpucfg_data[0] = 0;
+ c->loongson3_cpucfg_data[1] = 0;
+ c->loongson3_cpucfg_data[2] = 0;
+
+ /* Add CPUCFG features non-discoverable otherwise. */
+ switch (c->processor_id & (PRID_IMP_MASK | PRID_REV_MASK)) {
+ case PRID_IMP_LOONGSON_64R | PRID_REV_LOONGSON2K_R1_0:
+ case PRID_IMP_LOONGSON_64R | PRID_REV_LOONGSON2K_R1_1:
+ case PRID_IMP_LOONGSON_64R | PRID_REV_LOONGSON2K_R1_2:
+ case PRID_IMP_LOONGSON_64R | PRID_REV_LOONGSON2K_R1_3:
+ decode_loongson_config6(c);
+ probe_uca(c);
+
+ c->loongson3_cpucfg_data[0] |= (LOONGSON_CFG1_LSLDR0 |
+ LOONGSON_CFG1_LSSYNCI | LOONGSON_CFG1_LLSYNC |
+ LOONGSON_CFG1_TGTSYNC);
+ c->loongson3_cpucfg_data[1] |= (LOONGSON_CFG2_LBT1 |
+ LOONGSON_CFG2_LBT2 | LOONGSON_CFG2_LPMP |
+ LOONGSON_CFG2_LPM_REV2);
+ c->loongson3_cpucfg_data[2] = 0;
+ break;
+
+ case PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R1:
+ c->loongson3_cpucfg_data[0] |= (LOONGSON_CFG1_LSLDR0 |
+ LOONGSON_CFG1_LSSYNCI | LOONGSON_CFG1_LSUCA |
+ LOONGSON_CFG1_LLSYNC | LOONGSON_CFG1_TGTSYNC);
+ c->loongson3_cpucfg_data[1] |= (LOONGSON_CFG2_LBT1 |
+ LOONGSON_CFG2_LPMP | LOONGSON_CFG2_LPM_REV1);
+ c->loongson3_cpucfg_data[2] |= (
+ LOONGSON_CFG3_LCAM_REV1 |
+ LOONGSON_CFG3_LCAMNUM_REV1 |
+ LOONGSON_CFG3_LCAMKW_REV1 |
+ LOONGSON_CFG3_LCAMVW_REV1);
+ break;
+
+ case PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3B_R1:
+ case PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3B_R2:
+ c->loongson3_cpucfg_data[0] |= (LOONGSON_CFG1_LSLDR0 |
+ LOONGSON_CFG1_LSSYNCI | LOONGSON_CFG1_LSUCA |
+ LOONGSON_CFG1_LLSYNC | LOONGSON_CFG1_TGTSYNC);
+ c->loongson3_cpucfg_data[1] |= (LOONGSON_CFG2_LBT1 |
+ LOONGSON_CFG2_LPMP | LOONGSON_CFG2_LPM_REV1);
+ c->loongson3_cpucfg_data[2] |= (
+ LOONGSON_CFG3_LCAM_REV1 |
+ LOONGSON_CFG3_LCAMNUM_REV1 |
+ LOONGSON_CFG3_LCAMKW_REV1 |
+ LOONGSON_CFG3_LCAMVW_REV1);
+ break;
+
+ case PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0:
+ case PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_1:
+ case PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R3_0:
+ case PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R3_1:
+ decode_loongson_config6(c);
+ probe_uca(c);
+
+ c->loongson3_cpucfg_data[0] |= (LOONGSON_CFG1_CNT64 |
+ LOONGSON_CFG1_LSLDR0 | LOONGSON_CFG1_LSPREF |
+ LOONGSON_CFG1_LSPREFX | LOONGSON_CFG1_LSSYNCI |
+ LOONGSON_CFG1_LLSYNC | LOONGSON_CFG1_TGTSYNC);
+ c->loongson3_cpucfg_data[1] |= (LOONGSON_CFG2_LBT1 |
+ LOONGSON_CFG2_LBT2 | LOONGSON_CFG2_LBTMMU |
+ LOONGSON_CFG2_LPMP | LOONGSON_CFG2_LPM_REV1 |
+ LOONGSON_CFG2_LVZ_REV1);
+ c->loongson3_cpucfg_data[2] |= (LOONGSON_CFG3_LCAM_REV1 |
+ LOONGSON_CFG3_LCAMNUM_REV1 |
+ LOONGSON_CFG3_LCAMKW_REV1 |
+ LOONGSON_CFG3_LCAMVW_REV1);
+ break;
+
+ default:
+ /* It is possible that some future Loongson cores still do
+ * not have CPUCFG, so do not emulate anything for these
+ * cores.
+ */
+ return;
+ }
+
+ /* This feature is set by firmware, but all known Loongson-64 systems
+ * are configured this way.
+ */
+ c->loongson3_cpucfg_data[0] |= LOONGSON_CFG1_CDMAP;
+
+ /* Patch in dynamically probed bits. */
+ patch_cpucfg_sel1(c);
+ patch_cpucfg_sel2(c);
+ patch_cpucfg_sel3(c);
+
+have_cpucfg_now:
+ /* We have usable CPUCFG now, emulated or not.
+ * Announce CPUCFG availability to userspace via hwcap.
+ */
+ elf_hwcap |= HWCAP_LOONGSON_CPUCFG;
+}
diff --git a/arch/mips/loongson64/dma.c b/arch/mips/loongson64/dma.c
index 5e86635f71db..dbfe6e82fddd 100644
--- a/arch/mips/loongson64/dma.c
+++ b/arch/mips/loongson64/dma.c
@@ -2,21 +2,24 @@
#include <linux/dma-direct.h>
#include <linux/init.h>
#include <linux/swiotlb.h>
+#include <boot_param.h>
dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
{
/* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from
* Loongson-3's 48bit address space and embed it into 40bit */
long nid = (paddr >> 44) & 0x3;
- return ((nid << 44) ^ paddr) | (nid << 37);
+
+ return ((nid << 44) ^ paddr) | (nid << node_id_offset);
}
phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr)
{
/* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from
* Loongson-3's 48bit address space and embed it into 40bit */
- long nid = (daddr >> 37) & 0x3;
- return ((nid << 37) ^ daddr) | (nid << 44);
+ long nid = (daddr >> node_id_offset) & 0x3;
+
+ return ((nid << node_id_offset) ^ daddr) | (nid << 44);
}
void __init plat_swiotlb_setup(void)
diff --git a/arch/mips/loongson64/env.c b/arch/mips/loongson64/env.c
index 2554ef11170d..d11bc346bbca 100644
--- a/arch/mips/loongson64/env.c
+++ b/arch/mips/loongson64/env.c
@@ -14,12 +14,15 @@
* Author: Wu Zhangjin, wuzhangjin@gmail.com
*/
#include <linux/export.h>
+#include <linux/pci_ids.h>
#include <asm/bootinfo.h>
#include <loongson.h>
#include <boot_param.h>
#include <builtin_dtbs.h>
#include <workarounds.h>
+#define HOST_BRIDGE_CONFIG_ADDR ((void __iomem *)TO_UNCAC(0x1a000000))
+
u32 cpu_clock_freq;
EXPORT_SYMBOL(cpu_clock_freq);
struct efi_memory_map_loongson *loongson_memmap;
@@ -43,6 +46,8 @@ void __init prom_init_env(void)
struct system_loongson *esys;
struct efi_cpuinfo_loongson *ecpu;
struct irq_source_routing_table *eirq_source;
+ u32 id;
+ u16 vendor, device;
/* firmware arguments are initialized in head.S */
boot_p = (struct boot_params *)fw_arg2;
@@ -178,4 +183,19 @@ void __init prom_init_env(void)
memcpy(loongson_sysconf.sensors, esys->sensors,
sizeof(struct sensor_device) * loongson_sysconf.nr_sensors);
pr_info("CpuClock = %u\n", cpu_clock_freq);
+
+ /* Read the ID of PCI host bridge to detect bridge type */
+ id = readl(HOST_BRIDGE_CONFIG_ADDR);
+ vendor = id & 0xffff;
+ device = (id >> 16) & 0xffff;
+
+ if (vendor == PCI_VENDOR_ID_LOONGSON && device == 0x7a00) {
+ pr_info("The bridge chip is LS7A\n");
+ loongson_sysconf.bridgetype = LS7A;
+ loongson_sysconf.early_config = ls7a_early_config;
+ } else {
+ pr_info("The bridge chip is RS780E or SR5690\n");
+ loongson_sysconf.bridgetype = RS780E;
+ loongson_sysconf.early_config = rs780e_early_config;
+ }
}
diff --git a/arch/mips/loongson64/init.c b/arch/mips/loongson64/init.c
index da38944471f4..59ddadace83f 100644
--- a/arch/mips/loongson64/init.c
+++ b/arch/mips/loongson64/init.c
@@ -5,6 +5,7 @@
*/
#include <linux/irqchip.h>
+#include <linux/logic_pio.h>
#include <linux/memblock.h>
#include <asm/bootinfo.h>
#include <asm/traps.h>
@@ -13,25 +14,41 @@
#include <asm/fw/fw.h>
#include <loongson.h>
+#include <boot_param.h>
+
+#define NODE_ID_OFFSET_ADDR ((void __iomem *)TO_UNCAC(0x1001041c))
+
+u32 node_id_offset;
static void __init mips_nmi_setup(void)
{
void *base;
- extern char except_vec_nmi;
+ extern char except_vec_nmi[];
base = (void *)(CAC_BASE + 0x380);
- memcpy(base, &except_vec_nmi, 0x80);
+ memcpy(base, except_vec_nmi, 0x80);
flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
}
+void ls7a_early_config(void)
+{
+ node_id_offset = ((readl(NODE_ID_OFFSET_ADDR) >> 8) & 0x1f) + 36;
+}
+
+void rs780e_early_config(void)
+{
+ node_id_offset = 37;
+}
+
void __init prom_init(void)
{
fw_init_cmdline();
prom_init_env();
/* init base address of io space */
- set_io_port_base((unsigned long)
- ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE));
+ set_io_port_base(PCI_IOBASE);
+
+ loongson_sysconf.early_config();
prom_init_numa_memory();
@@ -46,7 +63,45 @@ void __init prom_free_prom_memory(void)
{
}
+static __init void reserve_pio_range(void)
+{
+ struct logic_pio_hwaddr *range;
+
+ range = kzalloc(sizeof(*range), GFP_ATOMIC);
+ if (!range)
+ return;
+
+ range->fwnode = &of_root->fwnode;
+ range->size = MMIO_LOWER_RESERVED;
+ range->hw_start = LOONGSON_PCIIO_BASE;
+ range->flags = LOGIC_PIO_CPU_MMIO;
+
+ if (logic_pio_register_range(range)) {
+ pr_err("Failed to reserve PIO range for legacy ISA\n");
+ goto free_range;
+ }
+
+ if (WARN(range->io_start != 0,
+ "Reserved PIO range does not start from 0\n"))
+ goto unregister;
+
+ /*
+ * i8259 would access I/O space, so mapping must be done here.
+ * Please remove it when all drivers can be managed by logic_pio.
+ */
+ ioremap_page_range(PCI_IOBASE, PCI_IOBASE + MMIO_LOWER_RESERVED,
+ LOONGSON_PCIIO_BASE,
+ pgprot_device(PAGE_KERNEL));
+
+ return;
+unregister:
+ logic_pio_unregister_range(range);
+free_range:
+ kfree(range);
+}
+
void __init arch_init_irq(void)
{
+ reserve_pio_range();
irqchip_init();
}
diff --git a/arch/mips/loongson64/pci.c b/arch/mips/loongson64/pci.c
deleted file mode 100644
index e84ae20c3290..000000000000
--- a/arch/mips/loongson64/pci.c
+++ /dev/null
@@ -1,51 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- */
-#include <linux/pci.h>
-
-#include <pci.h>
-#include <loongson.h>
-#include <boot_param.h>
-
-static struct resource loongson_pci_mem_resource = {
- .name = "pci memory space",
- .start = LOONGSON_PCI_MEM_START,
- .end = LOONGSON_PCI_MEM_END,
- .flags = IORESOURCE_MEM,
-};
-
-static struct resource loongson_pci_io_resource = {
- .name = "pci io space",
- .start = LOONGSON_PCI_IO_START,
- .end = IO_SPACE_LIMIT,
- .flags = IORESOURCE_IO,
-};
-
-static struct pci_controller loongson_pci_controller = {
- .pci_ops = &loongson_pci_ops,
- .io_resource = &loongson_pci_io_resource,
- .mem_resource = &loongson_pci_mem_resource,
- .mem_offset = 0x00000000UL,
- .io_offset = 0x00000000UL,
-};
-
-
-extern int sbx00_acpi_init(void);
-
-static int __init pcibios_init(void)
-{
-
- loongson_pci_controller.io_map_base = mips_io_port_base;
- loongson_pci_mem_resource.start = loongson_sysconf.pci_mem_start_addr;
- loongson_pci_mem_resource.end = loongson_sysconf.pci_mem_end_addr;
-
- register_pci_controller(&loongson_pci_controller);
-
- sbx00_acpi_init();
-
- return 0;
-}
-
-arch_initcall(pcibios_init);
diff --git a/arch/mips/loongson64/rtc.c b/arch/mips/loongson64/rtc.c
deleted file mode 100644
index 8d7628c0f513..000000000000
--- a/arch/mips/loongson64/rtc.c
+++ /dev/null
@@ -1,39 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Lemote Fuloong platform support
- *
- * Copyright(c) 2010 Arnaud Patard <apatard@mandriva.com>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mc146818rtc.h>
-
-static struct resource loongson_rtc_resources[] = {
- {
- .start = RTC_PORT(0),
- .end = RTC_PORT(1),
- .flags = IORESOURCE_IO,
- }, {
- .start = RTC_IRQ,
- .end = RTC_IRQ,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device loongson_rtc_device = {
- .name = "rtc_cmos",
- .id = -1,
- .resource = loongson_rtc_resources,
- .num_resources = ARRAY_SIZE(loongson_rtc_resources),
-};
-
-
-static int __init loongson_rtc_platform_init(void)
-{
- platform_device_register(&loongson_rtc_device);
- return 0;
-}
-
-device_initcall(loongson_rtc_platform_init);
diff --git a/arch/mips/loongson64/smp.c b/arch/mips/loongson64/smp.c
index e1fe8bbb377d..e744e1bee49e 100644
--- a/arch/mips/loongson64/smp.c
+++ b/arch/mips/loongson64/smp.c
@@ -15,7 +15,6 @@
#include <linux/kexec.h>
#include <asm/processor.h>
#include <asm/time.h>
-#include <asm/clock.h>
#include <asm/tlbflush.h>
#include <asm/cacheflush.h>
#include <loongson.h>
diff --git a/arch/mips/loongson64/time.c b/arch/mips/loongson64/time.c
index 1245f22cec84..91e842b58365 100644
--- a/arch/mips/loongson64/time.c
+++ b/arch/mips/loongson64/time.c
@@ -6,7 +6,7 @@
* Copyright (C) 2009 Lemote Inc.
* Author: Wu Zhangjin, wuzhangjin@gmail.com
*/
-#include <asm/mc146818-time.h>
+
#include <asm/time.h>
#include <asm/hpet.h>
@@ -21,9 +21,3 @@ void __init plat_time_init(void)
setup_hpet_timer();
#endif
}
-
-void read_persistent_clock64(struct timespec64 *ts)
-{
- ts->tv_sec = mc146818_get_cmos_time();
- ts->tv_nsec = 0;
-}
diff --git a/arch/mips/loongson64/vbios_quirk.c b/arch/mips/loongson64/vbios_quirk.c
new file mode 100644
index 000000000000..9a29e94d3db1
--- /dev/null
+++ b/arch/mips/loongson64/vbios_quirk.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/pci.h>
+#include <loongson.h>
+
+static void pci_fixup_radeon(struct pci_dev *pdev)
+{
+ struct resource *res = &pdev->resource[PCI_ROM_RESOURCE];
+
+ if (res->start)
+ return;
+
+ if (!loongson_sysconf.vgabios_addr)
+ return;
+
+ pci_disable_rom(pdev);
+ if (res->parent)
+ release_resource(res);
+
+ res->start = virt_to_phys((void *) loongson_sysconf.vgabios_addr);
+ res->end = res->start + 256*1024 - 1;
+ res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
+ IORESOURCE_PCI_FIXED;
+
+ dev_info(&pdev->dev, "BAR %d: assigned %pR for Radeon ROM\n",
+ PCI_ROM_RESOURCE, res);
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_ATI, 0x9615,
+ PCI_CLASS_DISPLAY_VGA, 8, pci_fixup_radeon);
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index 9701c89e7e14..587cf1d115e8 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -439,7 +439,7 @@ int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
regs->cp0_epc + dec_insn.pc_inc +
dec_insn.next_pc_inc;
}
- /* fall through */
+ fallthrough;
case jr_op:
/* For R6, JR already emulated in jalr_op */
if (NO_R6EMU && insn.r_format.func == jr_op)
@@ -459,11 +459,11 @@ int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
regs->regs[31] = regs->cp0_epc +
dec_insn.pc_inc +
dec_insn.next_pc_inc;
- /* fall through */
+ fallthrough;
case bltzl_op:
if (NO_R6EMU)
break;
- /* fall through */
+ fallthrough;
case bltz_op:
if ((long)regs->regs[insn.i_format.rs] < 0)
*contpc = regs->cp0_epc +
@@ -483,11 +483,11 @@ int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
regs->regs[31] = regs->cp0_epc +
dec_insn.pc_inc +
dec_insn.next_pc_inc;
- /* fall through */
+ fallthrough;
case bgezl_op:
if (NO_R6EMU)
break;
- /* fall through */
+ fallthrough;
case bgez_op:
if ((long)regs->regs[insn.i_format.rs] >= 0)
*contpc = regs->cp0_epc +
@@ -502,12 +502,12 @@ int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
break;
case jalx_op:
set_isa16_mode(bit);
- /* fall through */
+ fallthrough;
case jal_op:
regs->regs[31] = regs->cp0_epc +
dec_insn.pc_inc +
dec_insn.next_pc_inc;
- /* fall through */
+ fallthrough;
case j_op:
*contpc = regs->cp0_epc + dec_insn.pc_inc;
*contpc >>= 28;
@@ -519,7 +519,7 @@ int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
case beql_op:
if (NO_R6EMU)
break;
- /* fall through */
+ fallthrough;
case beq_op:
if (regs->regs[insn.i_format.rs] ==
regs->regs[insn.i_format.rt])
@@ -534,7 +534,7 @@ int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
case bnel_op:
if (NO_R6EMU)
break;
- /* fall through */
+ fallthrough;
case bne_op:
if (regs->regs[insn.i_format.rs] !=
regs->regs[insn.i_format.rt])
@@ -549,7 +549,7 @@ int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
case blezl_op:
if (!insn.i_format.rt && NO_R6EMU)
break;
- /* fall through */
+ fallthrough;
case blez_op:
/*
@@ -587,7 +587,7 @@ int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
case bgtzl_op:
if (!insn.i_format.rt && NO_R6EMU)
break;
- /* fall through */
+ fallthrough;
case bgtz_op:
/*
* Compact branches for R6 for the
@@ -725,7 +725,7 @@ int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
return 1;
}
/* R2/R6 compatible cop1 instruction */
- /* fall through */
+ fallthrough;
case cop2_op:
case cop1x_op:
if (insn.i_format.rs == bc_op) {
@@ -1217,14 +1217,14 @@ emul:
case bcfl_op:
if (cpu_has_mips_2_3_4_5_r)
likely = 1;
- /* fall through */
+ fallthrough;
case bcf_op:
cond = !cond;
break;
case bctl_op:
if (cpu_has_mips_2_3_4_5_r)
likely = 1;
- /* fall through */
+ fallthrough;
case bct_op:
break;
}
diff --git a/arch/mips/math-emu/dp_add.c b/arch/mips/math-emu/dp_add.c
index a8f98b8157f5..78504736be9e 100644
--- a/arch/mips/math-emu/dp_add.c
+++ b/arch/mips/math-emu/dp_add.c
@@ -92,8 +92,7 @@ union ieee754dp ieee754dp_add(union ieee754dp x, union ieee754dp y)
case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM):
DPDNORMX;
- /* fall through */
-
+ fallthrough;
case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM):
DPDNORMY;
break;
diff --git a/arch/mips/math-emu/dp_div.c b/arch/mips/math-emu/dp_div.c
index 2b682e930e39..ac1ecc46248d 100644
--- a/arch/mips/math-emu/dp_div.c
+++ b/arch/mips/math-emu/dp_div.c
@@ -91,8 +91,7 @@ union ieee754dp ieee754dp_div(union ieee754dp x, union ieee754dp y)
case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM):
DPDNORMX;
- /* fall through */
-
+ fallthrough;
case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM):
DPDNORMY;
break;
diff --git a/arch/mips/math-emu/dp_fmax.c b/arch/mips/math-emu/dp_fmax.c
index 3eda9ff7b491..126ec90bb4c7 100644
--- a/arch/mips/math-emu/dp_fmax.c
+++ b/arch/mips/math-emu/dp_fmax.c
@@ -93,8 +93,7 @@ union ieee754dp ieee754dp_fmax(union ieee754dp x, union ieee754dp y)
case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM):
DPDNORMX;
- /* fall through */
-
+ fallthrough;
case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM):
DPDNORMY;
break;
@@ -222,8 +221,7 @@ union ieee754dp ieee754dp_fmaxa(union ieee754dp x, union ieee754dp y)
case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM):
DPDNORMX;
- /* fall through */
-
+ fallthrough;
case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM):
DPDNORMY;
break;
diff --git a/arch/mips/math-emu/dp_fmin.c b/arch/mips/math-emu/dp_fmin.c
index b3594a1704a7..35ded4c45989 100644
--- a/arch/mips/math-emu/dp_fmin.c
+++ b/arch/mips/math-emu/dp_fmin.c
@@ -93,8 +93,7 @@ union ieee754dp ieee754dp_fmin(union ieee754dp x, union ieee754dp y)
case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM):
DPDNORMX;
- /* fall through */
-
+ fallthrough;
case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM):
DPDNORMY;
break;
@@ -222,8 +221,7 @@ union ieee754dp ieee754dp_fmina(union ieee754dp x, union ieee754dp y)
case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM):
DPDNORMX;
- /* fall through */
-
+ fallthrough;
case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM):
DPDNORMY;
break;
diff --git a/arch/mips/math-emu/dp_maddf.c b/arch/mips/math-emu/dp_maddf.c
index e24ef374d828..931e66f683ca 100644
--- a/arch/mips/math-emu/dp_maddf.c
+++ b/arch/mips/math-emu/dp_maddf.c
@@ -150,8 +150,7 @@ static union ieee754dp _dp_maddf(union ieee754dp z, union ieee754dp x,
case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM):
DPDNORMX;
- /* fall through */
-
+ fallthrough;
case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM):
if (zc == IEEE754_CLASS_INF)
return ieee754dp_inf(zs);
diff --git a/arch/mips/math-emu/dp_mul.c b/arch/mips/math-emu/dp_mul.c
index e8a97d26472a..8a671bb7af12 100644
--- a/arch/mips/math-emu/dp_mul.c
+++ b/arch/mips/math-emu/dp_mul.c
@@ -89,8 +89,7 @@ union ieee754dp ieee754dp_mul(union ieee754dp x, union ieee754dp y)
case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM):
DPDNORMX;
- /* fall through */
-
+ fallthrough;
case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM):
DPDNORMY;
break;
diff --git a/arch/mips/math-emu/dp_sqrt.c b/arch/mips/math-emu/dp_sqrt.c
index 06be390ba79a..1ee38f8242fd 100644
--- a/arch/mips/math-emu/dp_sqrt.c
+++ b/arch/mips/math-emu/dp_sqrt.c
@@ -52,8 +52,7 @@ union ieee754dp ieee754dp_sqrt(union ieee754dp x)
case IEEE754_CLASS_DNORM:
DPDNORMX;
- /* fall through */
-
+ fallthrough;
case IEEE754_CLASS_NORM:
if (xs) {
/* sqrt(-x) = Nan */
@@ -130,7 +129,7 @@ union ieee754dp ieee754dp_sqrt(union ieee754dp x)
switch (oldcsr.rm) {
case FPU_CSR_RU:
y.bits += 1;
- /* fall through */
+ fallthrough;
case FPU_CSR_RN:
t.bits += 1;
break;
diff --git a/arch/mips/math-emu/dp_sub.c b/arch/mips/math-emu/dp_sub.c
index f08aecefceff..08474ad2a64e 100644
--- a/arch/mips/math-emu/dp_sub.c
+++ b/arch/mips/math-emu/dp_sub.c
@@ -94,8 +94,7 @@ union ieee754dp ieee754dp_sub(union ieee754dp x, union ieee754dp y)
case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM):
DPDNORMX;
- /* fall through */
-
+ fallthrough;
case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM):
/* normalize ym,ye */
DPDNORMY;
diff --git a/arch/mips/math-emu/sp_add.c b/arch/mips/math-emu/sp_add.c
index 9af3ec7302fb..715cd0534301 100644
--- a/arch/mips/math-emu/sp_add.c
+++ b/arch/mips/math-emu/sp_add.c
@@ -92,8 +92,7 @@ union ieee754sp ieee754sp_add(union ieee754sp x, union ieee754sp y)
case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM):
SPDNORMX;
- /* fall through */
-
+ fallthrough;
case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM):
SPDNORMY;
break;
diff --git a/arch/mips/math-emu/sp_div.c b/arch/mips/math-emu/sp_div.c
index fcc285f3b48d..2bfa266fdc76 100644
--- a/arch/mips/math-emu/sp_div.c
+++ b/arch/mips/math-emu/sp_div.c
@@ -91,8 +91,7 @@ union ieee754sp ieee754sp_div(union ieee754sp x, union ieee754sp y)
case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM):
SPDNORMX;
- /* fall through */
-
+ fallthrough;
case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM):
SPDNORMY;
break;
diff --git a/arch/mips/math-emu/sp_fdp.c b/arch/mips/math-emu/sp_fdp.c
index 9f1456109aa8..56417497c88e 100644
--- a/arch/mips/math-emu/sp_fdp.c
+++ b/arch/mips/math-emu/sp_fdp.c
@@ -34,8 +34,7 @@ union ieee754sp ieee754sp_fdp(union ieee754dp x)
case IEEE754_CLASS_SNAN:
x = ieee754dp_nanxcpt(x);
EXPLODEXDP;
- /* fall through */
-
+ fallthrough;
case IEEE754_CLASS_QNAN:
y = ieee754sp_nan_fdp(xs, xm);
if (!ieee754_csr.nan2008) {
diff --git a/arch/mips/math-emu/sp_fmax.c b/arch/mips/math-emu/sp_fmax.c
index 4ce1d1f8b499..3fb16a1df3b8 100644
--- a/arch/mips/math-emu/sp_fmax.c
+++ b/arch/mips/math-emu/sp_fmax.c
@@ -93,8 +93,7 @@ union ieee754sp ieee754sp_fmax(union ieee754sp x, union ieee754sp y)
case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM):
SPDNORMX;
- /* fall through */
-
+ fallthrough;
case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM):
SPDNORMY;
break;
@@ -222,8 +221,7 @@ union ieee754sp ieee754sp_fmaxa(union ieee754sp x, union ieee754sp y)
case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM):
SPDNORMX;
- /* fall through */
-
+ fallthrough;
case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM):
SPDNORMY;
break;
diff --git a/arch/mips/math-emu/sp_fmin.c b/arch/mips/math-emu/sp_fmin.c
index 7ad867fd7de2..ad2599d4a892 100644
--- a/arch/mips/math-emu/sp_fmin.c
+++ b/arch/mips/math-emu/sp_fmin.c
@@ -93,8 +93,7 @@ union ieee754sp ieee754sp_fmin(union ieee754sp x, union ieee754sp y)
case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM):
SPDNORMX;
- /* fall through */
-
+ fallthrough;
case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM):
SPDNORMY;
break;
@@ -222,8 +221,7 @@ union ieee754sp ieee754sp_fmina(union ieee754sp x, union ieee754sp y)
case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM):
SPDNORMX;
- /* fall through */
-
+ fallthrough;
case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM):
SPDNORMY;
break;
diff --git a/arch/mips/math-emu/sp_maddf.c b/arch/mips/math-emu/sp_maddf.c
index 1b85b1a527ac..473ee222d90c 100644
--- a/arch/mips/math-emu/sp_maddf.c
+++ b/arch/mips/math-emu/sp_maddf.c
@@ -119,8 +119,7 @@ static union ieee754sp _sp_maddf(union ieee754sp z, union ieee754sp x,
case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM):
SPDNORMX;
- /* fall through */
-
+ fallthrough;
case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM):
if (zc == IEEE754_CLASS_INF)
return ieee754sp_inf(zs);
diff --git a/arch/mips/math-emu/sp_mul.c b/arch/mips/math-emu/sp_mul.c
index ded17e28e8bc..26cfd63025e9 100644
--- a/arch/mips/math-emu/sp_mul.c
+++ b/arch/mips/math-emu/sp_mul.c
@@ -89,8 +89,7 @@ union ieee754sp ieee754sp_mul(union ieee754sp x, union ieee754sp y)
case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM):
SPDNORMX;
- /* fall through */
-
+ fallthrough;
case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM):
SPDNORMY;
break;
diff --git a/arch/mips/math-emu/sp_sub.c b/arch/mips/math-emu/sp_sub.c
index f3d26a1f162c..16c8e9ae63ed 100644
--- a/arch/mips/math-emu/sp_sub.c
+++ b/arch/mips/math-emu/sp_sub.c
@@ -94,8 +94,7 @@ union ieee754sp ieee754sp_sub(union ieee754sp x, union ieee754sp y)
case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM):
SPDNORMX;
- /* fall through */
-
+ fallthrough;
case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM):
SPDNORMY;
break;
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index 46f483e952c8..865926a37775 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -23,7 +23,7 @@ obj-y += uasm-mips.o
endif
obj-$(CONFIG_32BIT) += ioremap.o pgtable-32.o
-obj-$(CONFIG_64BIT) += pgtable-64.o
+obj-$(CONFIG_64BIT) += ioremap64.o pgtable-64.o
obj-$(CONFIG_HIGHMEM) += highmem.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_DMA_NONCOHERENT) += dma-noncoherent.o
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 36a311348739..6fb83ac7c475 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1049,7 +1049,7 @@ static inline void rm7k_erratum31(void)
"cache\t%1, 0x3000(%0)\n\t"
".set pop\n"
:
- : "r" (addr), "i" (Index_Store_Tag_I), "i" (Fill));
+ : "r" (addr), "i" (Index_Store_Tag_I), "i" (Fill_I));
}
}
@@ -1073,12 +1073,12 @@ static inline int alias_74k_erratum(struct cpuinfo_mips *c)
if (rev <= PRID_REV_ENCODE_332(2, 4, 0))
present = 1;
if (rev == PRID_REV_ENCODE_332(2, 4, 0))
- write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND);
+ write_c0_config6(read_c0_config6() | MIPS_CONF6_MTI_SYND);
break;
case PRID_IMP_1074K:
if (rev <= PRID_REV_ENCODE_332(1, 1, 0)) {
present = 1;
- write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND);
+ write_c0_config6(read_c0_config6() | MIPS_CONF6_MTI_SYND);
}
break;
default:
@@ -1200,7 +1200,7 @@ static void probe_pcache(void)
case CPU_VR4133:
write_c0_config(config & ~VR41_CONF_P4K);
- /* fall through */
+ fallthrough;
case CPU_VR4131:
/* Workaround for cache instruction bug of VR4131 */
if (c->processor_id == 0x0c80U || c->processor_id == 0x0c81U ||
@@ -1303,7 +1303,8 @@ static void probe_pcache(void)
c->dcache.linesz;
c->dcache.waybit = 0;
if ((c->processor_id & (PRID_IMP_MASK | PRID_REV_MASK)) >=
- (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0))
+ (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0) ||
+ (c->processor_id & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R)
c->options |= MIPS_CPU_PREFETCH;
break;
@@ -1425,7 +1426,7 @@ static void probe_pcache(void)
case CPU_74K:
case CPU_1074K:
has_74k_erratum = alias_74k_erratum(c);
- /* Fall through. */
+ fallthrough;
case CPU_M14KC:
case CPU_M14KEC:
case CPU_24K:
@@ -1449,7 +1450,7 @@ static void probe_pcache(void)
c->dcache.flags |= MIPS_CACHE_PINDEX;
break;
}
- /* fall through */
+ fallthrough;
default:
if (has_74k_erratum || c->dcache.waysize > PAGE_SIZE)
c->dcache.flags |= MIPS_CACHE_ALIASES;
@@ -1629,8 +1630,13 @@ static void __init loongson3_sc_init(void)
scache_size = c->scache.sets *
c->scache.ways *
c->scache.linesz;
- /* Loongson-3 has 4 cores, 1MB scache for each. scaches are shared */
- scache_size *= 4;
+
+ /* Loongson-3 has 4-Scache banks, while Loongson-2K have only 2 banks */
+ if ((c->processor_id & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R)
+ scache_size *= 2;
+ else
+ scache_size *= 4;
+
c->scache.waybit = 0;
c->scache.waysize = scache_size / c->scache.ways;
pr_info("Unified secondary cache %ldkB %s, linesize %d bytes.\n",
@@ -1703,9 +1709,10 @@ static void setup_scache(void)
return;
default:
- if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 |
- MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R1 |
- MIPS_CPU_ISA_M64R2 | MIPS_CPU_ISA_M64R6)) {
+ if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
+ MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+ MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
+ MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
#ifdef CONFIG_MIPS_CPU_SCACHE
if (mips_sc_init ()) {
scache_size = c->scache.ways * c->scache.sets * c->scache.linesz;
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 33b409391ddb..ad6df1cea866 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -36,7 +36,6 @@ EXPORT_SYMBOL_GPL(flush_icache_range);
void (*local_flush_icache_range)(unsigned long start, unsigned long end);
EXPORT_SYMBOL_GPL(local_flush_icache_range);
void (*__flush_icache_user_range)(unsigned long start, unsigned long end);
-EXPORT_SYMBOL_GPL(__flush_icache_user_range);
void (*__local_flush_icache_user_range)(unsigned long start, unsigned long end);
EXPORT_SYMBOL_GPL(__local_flush_icache_user_range);
diff --git a/arch/mips/mm/dma-noncoherent.c b/arch/mips/mm/dma-noncoherent.c
index fcea92d95d86..563c2c0d0c81 100644
--- a/arch/mips/mm/dma-noncoherent.c
+++ b/arch/mips/mm/dma-noncoherent.c
@@ -33,6 +33,7 @@ static inline bool cpu_needs_post_dma_flush(void)
case CPU_R10000:
case CPU_R12000:
case CPU_BMIPS5000:
+ case CPU_LOONGSON2EF:
return true;
default:
/*
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 79684000de0e..620ebfa45ec1 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -358,17 +358,23 @@ void maar_init(void)
write_c0_maari(i);
back_to_back_c0_hazard();
upper = read_c0_maar();
+#ifdef CONFIG_XPA
+ upper |= (phys_addr_t)readx_c0_maar() << MIPS_MAARX_ADDR_SHIFT;
+#endif
write_c0_maari(i + 1);
back_to_back_c0_hazard();
lower = read_c0_maar();
+#ifdef CONFIG_XPA
+ lower |= (phys_addr_t)readx_c0_maar() << MIPS_MAARX_ADDR_SHIFT;
+#endif
attr = lower & upper;
lower = (lower & MIPS_MAAR_ADDR) << 4;
upper = ((upper & MIPS_MAAR_ADDR) << 4) | 0xffff;
pr_info(" [%d]: ", i / 2);
- if (!(attr & MIPS_MAAR_VL)) {
+ if ((attr & MIPS_MAAR_V) != MIPS_MAAR_V) {
pr_cont("disabled\n");
continue;
}
diff --git a/arch/mips/mm/ioremap.c b/arch/mips/mm/ioremap.c
index 8317f337a86e..b6dad2fd5575 100644
--- a/arch/mips/mm/ioremap.c
+++ b/arch/mips/mm/ioremap.c
@@ -14,94 +14,13 @@
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/mm_types.h>
+#include <linux/io.h>
#include <asm/cacheflush.h>
-#include <asm/io.h>
#include <asm/tlbflush.h>
+#include <ioremap.h>
-static inline void remap_area_pte(pte_t * pte, unsigned long address,
- phys_addr_t size, phys_addr_t phys_addr, unsigned long flags)
-{
- phys_addr_t end;
- unsigned long pfn;
- pgprot_t pgprot = __pgprot(_PAGE_GLOBAL | _PAGE_PRESENT | __READABLE
- | __WRITEABLE | flags);
-
- address &= ~PMD_MASK;
- end = address + size;
- if (end > PMD_SIZE)
- end = PMD_SIZE;
- BUG_ON(address >= end);
- pfn = phys_addr >> PAGE_SHIFT;
- do {
- if (!pte_none(*pte)) {
- printk("remap_area_pte: page already exists\n");
- BUG();
- }
- set_pte(pte, pfn_pte(pfn, pgprot));
- address += PAGE_SIZE;
- pfn++;
- pte++;
- } while (address && (address < end));
-}
-
-static inline int remap_area_pmd(pmd_t * pmd, unsigned long address,
- phys_addr_t size, phys_addr_t phys_addr, unsigned long flags)
-{
- phys_addr_t end;
-
- address &= ~PGDIR_MASK;
- end = address + size;
- if (end > PGDIR_SIZE)
- end = PGDIR_SIZE;
- phys_addr -= address;
- BUG_ON(address >= end);
- do {
- pte_t * pte = pte_alloc_kernel(pmd, address);
- if (!pte)
- return -ENOMEM;
- remap_area_pte(pte, address, end - address, address + phys_addr, flags);
- address = (address + PMD_SIZE) & PMD_MASK;
- pmd++;
- } while (address && (address < end));
- return 0;
-}
-
-static int remap_area_pages(unsigned long address, phys_addr_t phys_addr,
- phys_addr_t size, unsigned long flags)
-{
- int error;
- pgd_t * dir;
- unsigned long end = address + size;
-
- phys_addr -= address;
- dir = pgd_offset(&init_mm, address);
- flush_cache_all();
- BUG_ON(address >= end);
- do {
- p4d_t *p4d;
- pud_t *pud;
- pmd_t *pmd;
-
- error = -ENOMEM;
- p4d = p4d_alloc(&init_mm, dir, address);
- if (!p4d)
- break;
- pud = pud_alloc(&init_mm, p4d, address);
- if (!pud)
- break;
- pmd = pmd_alloc(&init_mm, pud, address);
- if (!pmd)
- break;
- if (remap_area_pmd(pmd, address, end - address,
- phys_addr + address, flags))
- break;
- error = 0;
- address = (address + PGDIR_SIZE) & PGDIR_MASK;
- dir++;
- } while (address && (address < end));
- flush_tlb_all();
- return error;
-}
+#define IS_LOW512(addr) (!((phys_addr_t)(addr) & (phys_addr_t) ~0x1fffffffULL))
+#define IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1)
static int __ioremap_check_ram(unsigned long start_pfn, unsigned long nr_pages,
void *arg)
@@ -118,27 +37,25 @@ static int __ioremap_check_ram(unsigned long start_pfn, unsigned long nr_pages,
}
/*
- * Generic mapping function (not visible outside):
- */
-
-/*
- * Remap an arbitrary physical address space into the kernel virtual
- * address space. Needed when the kernel wants to access high addresses
- * directly.
+ * ioremap_prot - map bus memory into CPU space
+ * @phys_addr: bus address of the memory
+ * @size: size of the resource to map
*
- * NOTE! We need to allow non-page-aligned mappings too: we will obviously
- * have to convert them into an offset in a page-aligned mapping, but the
- * caller shouldn't need to know that small detail.
+ * ioremap_prot gives the caller control over cache coherency attributes (CCA)
*/
-
-#define IS_LOW512(addr) (!((phys_addr_t)(addr) & (phys_addr_t) ~0x1fffffffULL))
-
-void __iomem * __ioremap(phys_addr_t phys_addr, phys_addr_t size, unsigned long flags)
+void __iomem *ioremap_prot(phys_addr_t phys_addr, unsigned long size,
+ unsigned long prot_val)
{
+ unsigned long flags = prot_val & _CACHE_MASK;
unsigned long offset, pfn, last_pfn;
- struct vm_struct * area;
+ struct vm_struct *area;
phys_addr_t last_addr;
- void * addr;
+ unsigned long vaddr;
+ void __iomem *cpu_addr;
+
+ cpu_addr = plat_ioremap(phys_addr, size, flags);
+ if (cpu_addr)
+ return cpu_addr;
phys_addr = fixup_bigphys_addr(phys_addr, size);
@@ -181,30 +98,22 @@ void __iomem * __ioremap(phys_addr_t phys_addr, phys_addr_t size, unsigned long
area = get_vm_area(size, VM_IOREMAP);
if (!area)
return NULL;
- addr = area->addr;
- if (remap_area_pages((unsigned long) addr, phys_addr, size, flags)) {
- vunmap(addr);
+ vaddr = (unsigned long)area->addr;
+
+ flags |= _PAGE_GLOBAL | _PAGE_PRESENT | __READABLE | __WRITEABLE;
+ if (ioremap_page_range(vaddr, vaddr + size, phys_addr,
+ __pgprot(flags))) {
+ free_vm_area(area);
return NULL;
}
- return (void __iomem *) (offset + (char *)addr);
+ return (void __iomem *)(vaddr + offset);
}
+EXPORT_SYMBOL(ioremap_prot);
-#define IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1)
-
-void __iounmap(const volatile void __iomem *addr)
+void iounmap(const volatile void __iomem *addr)
{
- struct vm_struct *p;
-
- if (IS_KSEG1(addr))
- return;
-
- p = remove_vm_area((void *) (PAGE_MASK & (unsigned long __force) addr));
- if (!p)
- printk(KERN_ERR "iounmap: bad address %p\n", addr);
-
- kfree(p);
+ if (!plat_iounmap(addr) && !IS_KSEG1(addr))
+ vunmap((void *)((unsigned long)addr & PAGE_MASK));
}
-
-EXPORT_SYMBOL(__ioremap);
-EXPORT_SYMBOL(__iounmap);
+EXPORT_SYMBOL(iounmap);
diff --git a/arch/mips/mm/ioremap64.c b/arch/mips/mm/ioremap64.c
new file mode 100644
index 000000000000..15e7820d6a5f
--- /dev/null
+++ b/arch/mips/mm/ioremap64.c
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/io.h>
+#include <ioremap.h>
+
+void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
+ unsigned long prot_val)
+{
+ unsigned long flags = prot_val & _CACHE_MASK;
+ u64 base = (flags == _CACHE_UNCACHED ? IO_BASE : UNCAC_BASE);
+ void __iomem *addr;
+
+ addr = plat_ioremap(offset, size, flags);
+ if (!addr)
+ addr = (void __iomem *)(unsigned long)(base + offset);
+ return addr;
+}
+EXPORT_SYMBOL(ioremap_prot);
+
+void iounmap(const volatile void __iomem *addr)
+{
+ plat_iounmap(addr);
+}
+EXPORT_SYMBOL(iounmap);
diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
index dbdbfe5d8408..eedad47df24f 100644
--- a/arch/mips/mm/sc-mips.c
+++ b/arch/mips/mm/sc-mips.c
@@ -194,9 +194,10 @@ static inline int __init mips_sc_probe(void)
return mips_sc_probe_cm3();
/* Ignore anything but MIPSxx processors */
- if (!(c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 |
- MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R1 |
- MIPS_CPU_ISA_M64R2 | MIPS_CPU_ISA_M64R6)))
+ if (!(c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
+ MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+ MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
+ MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)))
return 0;
/* Does this MIPS32/MIPS64 CPU have a config2 register? */
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index da407cdc2135..38c204204529 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -576,7 +576,7 @@ void build_tlb_write_entry(u32 **p, struct uasm_label **l,
case CPU_R5500:
if (m4kc_tlbp_war())
uasm_i_nop(p);
- /* fall through */
+ fallthrough;
case CPU_ALCHEMY:
tlbw(p);
break;
diff --git a/arch/mips/mti-malta/Platform b/arch/mips/mti-malta/Platform
index 2cc72c9b38e3..41e0d2a2d325 100644
--- a/arch/mips/mti-malta/Platform
+++ b/arch/mips/mti-malta/Platform
@@ -1,7 +1,6 @@
#
# MIPS Malta board
#
-platform-$(CONFIG_MIPS_MALTA) += mti-malta/
cflags-$(CONFIG_MIPS_MALTA) += -I$(srctree)/arch/mips/include/asm/mach-malta
ifdef CONFIG_KVM_GUEST
load-$(CONFIG_MIPS_MALTA) += 0x0000000040100000
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index ff2c1d809538..893af377aacc 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -90,24 +90,24 @@ static void __init console_config(void)
static void __init mips_nmi_setup(void)
{
void *base;
- extern char except_vec_nmi;
+ extern char except_vec_nmi[];
base = cpu_has_veic ?
(void *)(CAC_BASE + 0xa80) :
(void *)(CAC_BASE + 0x380);
- memcpy(base, &except_vec_nmi, 0x80);
+ memcpy(base, except_vec_nmi, 0x80);
flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
}
static void __init mips_ejtag_setup(void)
{
void *base;
- extern char except_vec_ejtag_debug;
+ extern char except_vec_ejtag_debug[];
base = cpu_has_veic ?
(void *)(CAC_BASE + 0xa00) :
(void *)(CAC_BASE + 0x300);
- memcpy(base, &except_vec_ejtag_debug, 0x80);
+ memcpy(base, except_vec_ejtag_debug, 0x80);
flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
}
diff --git a/arch/mips/netlogic/Platform b/arch/mips/netlogic/Platform
index fb8eb4c0c6ec..4195a097f5f2 100644
--- a/arch/mips/netlogic/Platform
+++ b/arch/mips/netlogic/Platform
@@ -13,5 +13,4 @@ cflags-$(CONFIG_CPU_XLP) += $(call cc-option,-march=xlp,-march=mips64r2)
#
# NETLOGIC processor support
#
-platform-$(CONFIG_NLM_COMMON) += netlogic/
load-$(CONFIG_NLM_COMMON) += 0xffffffff80100000
diff --git a/arch/mips/netlogic/xlr/fmn.c b/arch/mips/netlogic/xlr/fmn.c
index d7db1533889a..f90303f31967 100644
--- a/arch/mips/netlogic/xlr/fmn.c
+++ b/arch/mips/netlogic/xlr/fmn.c
@@ -103,7 +103,7 @@ static irqreturn_t fmn_message_handler(int irq, void *data)
mflags = nlm_cop2_enable_irqsave();
}
}
- };
+ }
/* Enable message ring intr, to any thread in core */
nlm_fmn_setup_intr(irq, (1 << nlm_threads_per_core) - 1);
nlm_cop2_disable_irqrestore(mflags);
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index 03db268cba5c..d3996c4c6440 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -110,7 +110,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
case CPU_LOONGSON64:
lmodel = &op_model_loongson3_ops;
break;
- };
+ }
/*
* Always set the backtrace. This allows unsupported CPU types to still
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index a537bf98912c..1493c49ca47a 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -172,15 +172,15 @@ static void mipsxx_cpu_setup(void *args)
case 4:
w_c0_perfctrl3(0);
w_c0_perfcntr3(reg.counter[3]);
- /* fall through */
+ fallthrough;
case 3:
w_c0_perfctrl2(0);
w_c0_perfcntr2(reg.counter[2]);
- /* fall through */
+ fallthrough;
case 2:
w_c0_perfctrl1(0);
w_c0_perfcntr1(reg.counter[1]);
- /* fall through */
+ fallthrough;
case 1:
w_c0_perfctrl0(0);
w_c0_perfcntr0(reg.counter[0]);
@@ -198,13 +198,13 @@ static void mipsxx_cpu_start(void *args)
switch (counters) {
case 4:
w_c0_perfctrl3(WHAT | reg.control[3]);
- /* fall through */
+ fallthrough;
case 3:
w_c0_perfctrl2(WHAT | reg.control[2]);
- /* fall through */
+ fallthrough;
case 2:
w_c0_perfctrl1(WHAT | reg.control[1]);
- /* fall through */
+ fallthrough;
case 1:
w_c0_perfctrl0(WHAT | reg.control[0]);
}
@@ -221,13 +221,13 @@ static void mipsxx_cpu_stop(void *args)
switch (counters) {
case 4:
w_c0_perfctrl3(0);
- /* fall through */
+ fallthrough;
case 3:
w_c0_perfctrl2(0);
- /* fall through */
+ fallthrough;
case 2:
w_c0_perfctrl1(0);
- /* fall through */
+ fallthrough;
case 1:
w_c0_perfctrl0(0);
}
@@ -245,7 +245,7 @@ static int mipsxx_perfcount_handler(void)
switch (counters) {
#define HANDLE_COUNTER(n) \
- /* fall through */ \
+ fallthrough; \
case n + 1: \
control = r_c0_perfctrl ## n(); \
counter = r_c0_perfcntr ## n(); \
@@ -307,15 +307,15 @@ static void reset_counters(void *arg)
case 4:
w_c0_perfctrl3(0);
w_c0_perfcntr3(0);
- /* fall through */
+ fallthrough;
case 3:
w_c0_perfctrl2(0);
w_c0_perfcntr2(0);
- /* fall through */
+ fallthrough;
case 2:
w_c0_perfctrl1(0);
w_c0_perfcntr1(0);
- /* fall through */
+ fallthrough;
case 1:
w_c0_perfctrl0(0);
w_c0_perfcntr0(0);
diff --git a/arch/mips/paravirt/Platform b/arch/mips/paravirt/Platform
index 7e76ef25ea17..0b857580dfdd 100644
--- a/arch/mips/paravirt/Platform
+++ b/arch/mips/paravirt/Platform
@@ -1,7 +1,6 @@
#
# Generic para-virtualized guest.
#
-platform-$(CONFIG_MIPS_PARAVIRT) += paravirt/
cflags-$(CONFIG_MIPS_PARAVIRT) += \
-I$(srctree)/arch/mips/include/asm/mach-paravirt
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 342ce10ef593..0f68d6849978 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -13,10 +13,8 @@ obj-$(CONFIG_PCI_DRIVERS_GENERIC)+= pci-generic.o
obj-$(CONFIG_MIPS_BONITO64) += ops-bonito64.o
obj-$(CONFIG_PCI_GT64XXX_PCI0) += ops-gt64xxx_pci0.o
obj-$(CONFIG_MIPS_MSC) += ops-msc.o
-obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o
obj-$(CONFIG_SOC_TX3927) += ops-tx3927.o
obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
-obj-$(CONFIG_NEC_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o
obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
@@ -31,15 +29,10 @@ obj-$(CONFIG_PCI_XTALK_BRIDGE) += pci-xtalk-bridge.o
# These are still pretty much in the old state, watch, go blind.
#
obj-$(CONFIG_ATH79) += fixup-ath79.o
-obj-$(CONFIG_LASAT) += pci-lasat.o
obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o
obj-$(CONFIG_LEMOTE_MACH2F) += fixup-lemote2f.o ops-loongson2.o
-obj-$(CONFIG_MACH_LOONGSON64) += fixup-loongson3.o ops-loongson3.o
obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o pci-malta.o
-obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o
-obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o
-obj-$(CONFIG_PMC_MSP7120_FPGA) += fixup-pmcmsp.o ops-pmcmsp.o
obj-$(CONFIG_SGI_IP27) += pci-ip27.o
obj-$(CONFIG_SGI_IP32) += fixup-ip32.o ops-mace.o pci-ip32.o
obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o
diff --git a/arch/mips/pci/fixup-emma2rh.c b/arch/mips/pci/fixup-emma2rh.c
deleted file mode 100644
index 2541f9bc12de..000000000000
--- a/arch/mips/pci/fixup-emma2rh.c
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) NEC Electronics Corporation 2004-2006
- *
- * This file is based on the arch/mips/ddb5xxx/ddb5477/pci.c
- *
- * Copyright 2001 MontaVista Software Inc.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-
-#include <asm/bootinfo.h>
-
-#include <asm/emma/emma2rh.h>
-
-#define EMMA2RH_PCI_HOST_SLOT 0x09
-#define EMMA2RH_USB_SLOT 0x03
-#define PCI_DEVICE_ID_NEC_EMMA2RH 0x014b /* EMMA2RH PCI Host */
-
-/*
- * we fix up irqs based on the slot number.
- * The first entry is at AD:11.
- * Fortunately this works because, although we have two pci buses,
- * they all have different slot numbers (except for rockhopper slot 20
- * which is handled below).
- *
- */
-
-#define MAX_SLOT_NUM 10
-static unsigned char irq_map[][5] = {
- [3] = {0, MARKEINS_PCI_IRQ_INTB, MARKEINS_PCI_IRQ_INTC,
- MARKEINS_PCI_IRQ_INTD, 0,},
- [4] = {0, MARKEINS_PCI_IRQ_INTA, 0, 0, 0,},
- [5] = {0, 0, 0, 0, 0,},
- [6] = {0, MARKEINS_PCI_IRQ_INTC, MARKEINS_PCI_IRQ_INTD,
- MARKEINS_PCI_IRQ_INTA, MARKEINS_PCI_IRQ_INTB,},
-};
-
-static void nec_usb_controller_fixup(struct pci_dev *dev)
-{
- if (PCI_SLOT(dev->devfn) == EMMA2RH_USB_SLOT)
- /* on board USB controller configuration */
- pci_write_config_dword(dev, 0xe4, 1 << 5);
-}
-
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
- nec_usb_controller_fixup);
-
-/*
- * Prevent the PCI layer from seeing the resources allocated to this device
- * if it is the host bridge by marking it as such. These resources are of
- * no consequence to the PCI layer (they are handled elsewhere).
- */
-static void emma2rh_pci_host_fixup(struct pci_dev *dev)
-{
- int i;
-
- if (PCI_SLOT(dev->devfn) == EMMA2RH_PCI_HOST_SLOT) {
- dev->class &= 0xff;
- dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
- for (i = 0; i < PCI_NUM_RESOURCES; i++) {
- dev->resource[i].start = 0;
- dev->resource[i].end = 0;
- dev->resource[i].flags = 0;
- }
- }
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_EMMA2RH,
- emma2rh_pci_host_fixup);
-
-int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- return irq_map[slot][pin];
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}
diff --git a/arch/mips/pci/fixup-loongson3.c b/arch/mips/pci/fixup-loongson3.c
deleted file mode 100644
index 8a741c2c6685..000000000000
--- a/arch/mips/pci/fixup-loongson3.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * fixup-loongson3.c
- *
- * Copyright (C) 2012 Lemote, Inc.
- * Author: Xiang Yu, xiangy@lemote.com
- * Chen Huacai, chenhc@lemote.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-#include <linux/pci.h>
-#include <boot_param.h>
-
-static void print_fixup_info(const struct pci_dev *pdev)
-{
- dev_info(&pdev->dev, "Device %x:%x, irq %d\n",
- pdev->vendor, pdev->device, pdev->irq);
-}
-
-int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- print_fixup_info(dev);
- return dev->irq;
-}
-
-static void pci_fixup_radeon(struct pci_dev *pdev)
-{
- struct resource *res = &pdev->resource[PCI_ROM_RESOURCE];
-
- if (res->start)
- return;
-
- if (!loongson_sysconf.vgabios_addr)
- return;
-
- pci_disable_rom(pdev);
- if (res->parent)
- release_resource(res);
-
- res->start = virt_to_phys((void *) loongson_sysconf.vgabios_addr);
- res->end = res->start + 256*1024 - 1;
- res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
- IORESOURCE_PCI_FIXED;
-
- dev_info(&pdev->dev, "BAR %d: assigned %pR for Radeon ROM\n",
- PCI_ROM_RESOURCE, res);
-}
-
-DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_ATI, PCI_ANY_ID,
- PCI_CLASS_DISPLAY_VGA, 8, pci_fixup_radeon);
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}
diff --git a/arch/mips/pci/fixup-pmcmsp.c b/arch/mips/pci/fixup-pmcmsp.c
deleted file mode 100644
index 4ad2ef02087b..000000000000
--- a/arch/mips/pci/fixup-pmcmsp.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * PMC-Sierra MSP board specific pci fixups.
- *
- * Copyright 2001 MontaVista Software Inc.
- * Copyright 2005-2007 PMC-Sierra, Inc
- *
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifdef CONFIG_PCI
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/byteorder.h>
-
-#include <msp_pci.h>
-#include <msp_cic_int.h>
-
-/* PCI interrupt pins */
-#define IRQ4 MSP_INT_EXT4
-#define IRQ5 MSP_INT_EXT5
-#define IRQ6 MSP_INT_EXT6
-
-#if defined(CONFIG_PMC_MSP7120_GW)
-/* Garibaldi Board IRQ wiring to PCI slots */
-static char irq_tab[][5] = {
- /* INTA INTB INTC INTD */
- {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */
- {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */
- {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */
- {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */
- {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */
- {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */
- {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */
- {0, 0, 0, 0, 0 }, /* 6 (AD[16]): Unused */
- {0, 0, 0, 0, 0 }, /* 7 (AD[17]): Unused */
- {0, 0, 0, 0, 0 }, /* 8 (AD[18]): Unused */
- {0, 0, 0, 0, 0 }, /* 9 (AD[19]): Unused */
- {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */
- {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */
- {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */
- {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */
- {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */
- {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */
- {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */
- {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */
- {0, IRQ4, IRQ4, 0, 0 }, /* 18 (AD[28]): slot 0 */
- {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */
- {0, IRQ5, IRQ5, 0, 0 }, /* 20 (AD[30]): slot 1 */
- {0, IRQ6, IRQ6, 0, 0 } /* 21 (AD[31]): slot 2 */
-};
-
-#elif defined(CONFIG_PMC_MSP7120_EVAL)
-
-/* MSP7120 Eval Board IRQ wiring to PCI slots */
-static char irq_tab[][5] = {
- /* INTA INTB INTC INTD */
- {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */
- {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */
- {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */
- {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */
- {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */
- {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */
- {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */
- {0, IRQ6, IRQ6, 0, 0 }, /* 6 (AD[16]): slot 3 (mini) */
- {0, IRQ5, IRQ5, 0, 0 }, /* 7 (AD[17]): slot 2 (mini) */
- {0, IRQ4, IRQ4, IRQ4, IRQ4}, /* 8 (AD[18]): slot 0 (PCI) */
- {0, IRQ5, IRQ5, IRQ5, IRQ5}, /* 9 (AD[19]): slot 1 (PCI) */
- {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */
- {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */
- {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */
- {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */
- {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */
- {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */
- {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */
- {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */
- {0, 0, 0, 0, 0 }, /* 18 (AD[28]): Unused */
- {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */
- {0, 0, 0, 0, 0 }, /* 20 (AD[30]): Unused */
- {0, 0, 0, 0, 0 } /* 21 (AD[31]): Unused */
-};
-
-#else
-
-/* Unknown board -- don't assign any IRQs */
-static char irq_tab[][5] = {
- /* INTA INTB INTC INTD */
- {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */
- {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */
- {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */
- {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */
- {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */
- {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */
- {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */
- {0, 0, 0, 0, 0 }, /* 6 (AD[16]): Unused */
- {0, 0, 0, 0, 0 }, /* 7 (AD[17]): Unused */
- {0, 0, 0, 0, 0 }, /* 8 (AD[18]): Unused */
- {0, 0, 0, 0, 0 }, /* 9 (AD[19]): Unused */
- {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */
- {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */
- {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */
- {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */
- {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */
- {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */
- {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */
- {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */
- {0, 0, 0, 0, 0 }, /* 18 (AD[28]): Unused */
- {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */
- {0, 0, 0, 0, 0 }, /* 20 (AD[30]): Unused */
- {0, 0, 0, 0, 0 } /* 21 (AD[31]): Unused */
-};
-#endif
-
-/*****************************************************************************
- *
- * FUNCTION: pcibios_plat_dev_init
- * _________________________________________________________________________
- *
- * DESCRIPTION: Perform platform specific device initialization at
- * pci_enable_device() time.
- * None are needed for the MSP7120 PCI Controller.
- *
- * INPUTS: dev - structure describing the PCI device
- *
- * OUTPUTS: none
- *
- * RETURNS: PCIBIOS_SUCCESSFUL
- *
- ****************************************************************************/
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*****************************************************************************
- *
- * FUNCTION: pcibios_map_irq
- * _________________________________________________________________________
- *
- * DESCRIPTION: Perform board supplied PCI IRQ mapping routine.
- *
- * INPUTS: dev - unused
- * slot - PCI slot. Identified by which bit of the AD[] bus
- * drives the IDSEL line. AD[10] is 0, AD[31] is
- * slot 21.
- * pin - numbered using the scheme of the PCI_INTERRUPT_PIN
- * field of the config header.
- *
- * OUTPUTS: none
- *
- * RETURNS: IRQ number
- *
- ****************************************************************************/
-int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-#if !defined(CONFIG_PMC_MSP7120_GW) && !defined(CONFIG_PMC_MSP7120_EVAL)
- printk(KERN_WARNING "PCI: unknown board, no PCI IRQs assigned.\n");
-#endif
- printk(KERN_WARNING "PCI: irq_tab returned %d for slot=%d pin=%d\n",
- irq_tab[slot][pin], slot, pin);
-
- return irq_tab[slot][pin];
-}
-
-#endif /* CONFIG_PCI */
diff --git a/arch/mips/pci/fixup-sni.c b/arch/mips/pci/fixup-sni.c
index adb9a58641e8..de012f8bd8c3 100644
--- a/arch/mips/pci/fixup-sni.c
+++ b/arch/mips/pci/fixup-sni.c
@@ -151,8 +151,7 @@ int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
case SNI_BRD_PCI_MTOWER:
if (is_rm300_revd())
return irq_tab_rm300d[slot][pin];
- /* fall through */
-
+ fallthrough;
case SNI_BRD_PCI_DESKTOP:
return irq_tab_rm200[slot][pin];
diff --git a/arch/mips/pci/ops-bcm63xx.c b/arch/mips/pci/ops-bcm63xx.c
index 925c72348fb6..dc6dc2741272 100644
--- a/arch/mips/pci/ops-bcm63xx.c
+++ b/arch/mips/pci/ops-bcm63xx.c
@@ -474,7 +474,7 @@ static int bcm63xx_pcie_can_access(struct pci_bus *bus, int devfn)
if (PCI_SLOT(devfn) == 0)
return bcm_pcie_readl(PCIE_DLSTATUS_REG)
& DLSTATUS_PHYLINKUP;
- /* else, fall through */
+ fallthrough;
default:
return false;
}
diff --git a/arch/mips/pci/ops-emma2rh.c b/arch/mips/pci/ops-emma2rh.c
deleted file mode 100644
index 65f47344536c..000000000000
--- a/arch/mips/pci/ops-emma2rh.c
+++ /dev/null
@@ -1,167 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) NEC Electronics Corporation 2004-2006
- *
- * This file is based on the arch/mips/pci/ops-vr41xx.c
- *
- * Copyright 2001 MontaVista Software Inc.
- */
-
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#include <asm/addrspace.h>
-
-#include <asm/emma/emma2rh.h>
-
-#define RTABORT (0x1<<9)
-#define RMABORT (0x1<<10)
-#define EMMA2RH_PCI_SLOT_NUM 9 /* 0000:09.0 is final PCI device */
-
-/*
- * access config space
- */
-
-static int check_args(struct pci_bus *bus, u32 devfn, u32 * bus_num)
-{
- /* check if the bus is top-level */
- if (bus->parent != NULL)
- *bus_num = bus->number;
- else
- *bus_num = 0;
-
- if (*bus_num == 0) {
- /* Type 0 */
- if (PCI_SLOT(devfn) >= 10)
- return PCIBIOS_DEVICE_NOT_FOUND;
- } else {
- /* Type 1 */
- if ((*bus_num >= 64) || (PCI_SLOT(devfn) >= 16))
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
- return 0;
-}
-
-static inline int set_pci_configuration_address(unsigned char bus_num,
- unsigned int devfn, int where)
-{
- u32 config_win0;
-
- emma2rh_out32(EMMA2RH_PCI_INT, ~RMABORT);
- if (bus_num == 0)
- /*
- * Type 0 configuration
- */
- config_win0 = (1 << (22 + PCI_SLOT(devfn))) | (5 << 9);
- else
- /*
- * Type 1 configuration
- */
- config_win0 = (bus_num << 26) | (PCI_SLOT(devfn) << 22) |
- (1 << 15) | (5 << 9);
-
- emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, config_win0);
-
- return 0;
-}
-
-static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where,
- int size, uint32_t * val)
-{
- u32 bus_num;
- u32 base = KSEG1ADDR(EMMA2RH_PCI_CONFIG_BASE);
- u32 backup_win0;
- u32 data;
-
- *val = 0xffffffffU;
-
- if (check_args(bus, devfn, &bus_num) == PCIBIOS_DEVICE_NOT_FOUND)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- backup_win0 = emma2rh_in32(EMMA2RH_PCI_IWIN0_CTR);
-
- if (set_pci_configuration_address(bus_num, devfn, where) < 0)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- data =
- *(volatile u32 *)(base + (PCI_FUNC(devfn) << 8) +
- (where & 0xfffffffc));
-
- switch (size) {
- case 1:
- *val = (data >> ((where & 3) << 3)) & 0xffU;
- break;
- case 2:
- *val = (data >> ((where & 2) << 3)) & 0xffffU;
- break;
- case 4:
- *val = data;
- break;
- default:
- emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, backup_win0);
- return PCIBIOS_FUNC_NOT_SUPPORTED;
- }
-
- emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, backup_win0);
-
- if (emma2rh_in32(EMMA2RH_PCI_INT) & RMABORT)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 val)
-{
- u32 bus_num;
- u32 base = KSEG1ADDR(EMMA2RH_PCI_CONFIG_BASE);
- u32 backup_win0;
- u32 data;
- int shift;
-
- if (check_args(bus, devfn, &bus_num) == PCIBIOS_DEVICE_NOT_FOUND)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- backup_win0 = emma2rh_in32(EMMA2RH_PCI_IWIN0_CTR);
-
- if (set_pci_configuration_address(bus_num, devfn, where) < 0)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- /* read modify write */
- data =
- *(volatile u32 *)(base + (PCI_FUNC(devfn) << 8) +
- (where & 0xfffffffc));
-
- switch (size) {
- case 1:
- shift = (where & 3) << 3;
- data &= ~(0xffU << shift);
- data |= ((val & 0xffU) << shift);
- break;
- case 2:
- shift = (where & 2) << 3;
- data &= ~(0xffffU << shift);
- data |= ((val & 0xffffU) << shift);
- break;
- case 4:
- data = val;
- break;
- default:
- emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, backup_win0);
- return PCIBIOS_FUNC_NOT_SUPPORTED;
- }
- *(volatile u32 *)(base + (PCI_FUNC(devfn) << 8) +
- (where & 0xfffffffc)) = data;
-
- emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, backup_win0);
- if (emma2rh_in32(EMMA2RH_PCI_INT) & RMABORT)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops emma2rh_pci_ops = {
- .read = pci_config_read,
- .write = pci_config_write,
-};
diff --git a/arch/mips/pci/ops-loongson3.c b/arch/mips/pci/ops-loongson3.c
deleted file mode 100644
index 2f6ad36bdea6..000000000000
--- a/arch/mips/pci/ops-loongson3.c
+++ /dev/null
@@ -1,116 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-
-#include <asm/mips-boards/bonito64.h>
-
-#include <loongson.h>
-
-#define PCI_ACCESS_READ 0
-#define PCI_ACCESS_WRITE 1
-
-#define HT1LO_PCICFG_BASE 0x1a000000
-#define HT1LO_PCICFG_BASE_TP1 0x1b000000
-
-static int loongson3_pci_config_access(unsigned char access_type,
- struct pci_bus *bus, unsigned int devfn,
- int where, u32 *data)
-{
- unsigned char busnum = bus->number;
- int function = PCI_FUNC(devfn);
- int device = PCI_SLOT(devfn);
- int reg = where & ~3;
- void *addrp;
- u64 addr;
-
- if (where < PCI_CFG_SPACE_SIZE) { /* standard config */
- addr = (busnum << 16) | (device << 11) | (function << 8) | reg;
- if (busnum == 0) {
- if (device > 31)
- return PCIBIOS_DEVICE_NOT_FOUND;
- addrp = (void *)TO_UNCAC(HT1LO_PCICFG_BASE | addr);
- } else {
- addrp = (void *)TO_UNCAC(HT1LO_PCICFG_BASE_TP1 | addr);
- }
- } else if (where < PCI_CFG_SPACE_EXP_SIZE) { /* extended config */
- struct pci_dev *rootdev;
-
- rootdev = pci_get_domain_bus_and_slot(0, 0, 0);
- if (!rootdev)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- addr = pci_resource_start(rootdev, 3);
- if (!addr)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- addr |= busnum << 20 | device << 15 | function << 12 | reg;
- addrp = (void *)TO_UNCAC(addr);
- } else {
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
-
- if (access_type == PCI_ACCESS_WRITE)
- writel(*data, addrp);
- else {
- *data = readl(addrp);
- if (*data == 0xffffffff) {
- *data = -1;
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int loongson3_pci_pcibios_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- u32 data = 0;
- int ret = loongson3_pci_config_access(PCI_ACCESS_READ,
- bus, devfn, where, &data);
-
- if (ret != PCIBIOS_SUCCESSFUL)
- return ret;
-
- if (size == 1)
- *val = (data >> ((where & 3) << 3)) & 0xff;
- else if (size == 2)
- *val = (data >> ((where & 3) << 3)) & 0xffff;
- else
- *val = data;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int loongson3_pci_pcibios_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- u32 data = 0;
- int ret;
-
- if (size == 4)
- data = val;
- else {
- ret = loongson3_pci_config_access(PCI_ACCESS_READ,
- bus, devfn, where, &data);
- if (ret != PCIBIOS_SUCCESSFUL)
- return ret;
-
- if (size == 1)
- data = (data & ~(0xff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- else if (size == 2)
- data = (data & ~(0xffff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- }
-
- ret = loongson3_pci_config_access(PCI_ACCESS_WRITE,
- bus, devfn, where, &data);
-
- return ret;
-}
-
-struct pci_ops loongson_pci_ops = {
- .read = loongson3_pci_pcibios_read,
- .write = loongson3_pci_pcibios_write
-};
diff --git a/arch/mips/pci/ops-nile4.c b/arch/mips/pci/ops-nile4.c
deleted file mode 100644
index b00658d19116..000000000000
--- a/arch/mips/pci/ops-nile4.c
+++ /dev/null
@@ -1,136 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <asm/bootinfo.h>
-
-#include <asm/lasat/lasat.h>
-#include <asm/nile4.h>
-
-#define PCI_ACCESS_READ 0
-#define PCI_ACCESS_WRITE 1
-
-#define LO(reg) (reg / 4)
-#define HI(reg) (reg / 4 + 1)
-
-volatile unsigned long *const vrc_pciregs = (void *) Vrc5074_BASE;
-
-static int nile4_pcibios_config_access(unsigned char access_type,
- struct pci_bus *bus, unsigned int devfn, int where, u32 *val)
-{
- unsigned char busnum = bus->number;
- u32 adr, mask, err;
-
- if ((busnum == 0) && (PCI_SLOT(devfn) > 8))
- /* The addressing scheme chosen leaves room for just
- * 8 devices on the first busnum (besides the PCI
- * controller itself) */
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- if ((busnum == 0) && (devfn == PCI_DEVFN(0, 0))) {
- /* Access controller registers directly */
- if (access_type == PCI_ACCESS_WRITE) {
- vrc_pciregs[(0x200 + where) >> 2] = *val;
- } else {
- *val = vrc_pciregs[(0x200 + where) >> 2];
- }
- return PCIBIOS_SUCCESSFUL;
- }
-
- /* Temporarily map PCI Window 1 to config space */
- mask = vrc_pciregs[LO(NILE4_PCIINIT1)];
- vrc_pciregs[LO(NILE4_PCIINIT1)] = 0x0000001a | (busnum ? 0x200 : 0);
-
- /* Clear PCI Error register. This also clears the Error Type
- * bits in the Control register */
- vrc_pciregs[LO(NILE4_PCIERR)] = 0;
- vrc_pciregs[HI(NILE4_PCIERR)] = 0;
-
- /* Setup address */
- if (busnum == 0)
- adr =
- KSEG1ADDR(PCI_WINDOW1) +
- ((1 << (PCI_SLOT(devfn) + 15)) | (PCI_FUNC(devfn) << 8)
- | (where & ~3));
- else
- adr = KSEG1ADDR(PCI_WINDOW1) | (busnum << 16) | (devfn << 8) |
- (where & ~3);
-
- if (access_type == PCI_ACCESS_WRITE)
- *(u32 *) adr = *val;
- else
- *val = *(u32 *) adr;
-
- /* Check for master or target abort */
- err = (vrc_pciregs[HI(NILE4_PCICTRL)] >> 5) & 0x7;
-
- /* Restore PCI Window 1 */
- vrc_pciregs[LO(NILE4_PCIINIT1)] = mask;
-
- if (err)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int nile4_pcibios_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- u32 data = 0;
- int err;
-
- if ((size == 2) && (where & 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
- else if ((size == 4) && (where & 3))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- err = nile4_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where,
- &data);
- if (err)
- return err;
-
- if (size == 1)
- *val = (data >> ((where & 3) << 3)) & 0xff;
- else if (size == 2)
- *val = (data >> ((where & 3) << 3)) & 0xffff;
- else
- *val = data;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int nile4_pcibios_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- u32 data = 0;
- int err;
-
- if ((size == 2) && (where & 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
- else if ((size == 4) && (where & 3))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- err = nile4_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where,
- &data);
- if (err)
- return err;
-
- if (size == 1)
- data = (data & ~(0xff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- else if (size == 2)
- data = (data & ~(0xffff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- else
- data = val;
-
- if (nile4_pcibios_config_access
- (PCI_ACCESS_WRITE, bus, devfn, where, &data))
- return -1;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops nile4_pci_ops = {
- .read = nile4_pcibios_read,
- .write = nile4_pcibios_write,
-};
diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c
deleted file mode 100644
index ad5dd711c575..000000000000
--- a/arch/mips/pci/ops-pmcmsp.c
+++ /dev/null
@@ -1,944 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * PMC-Sierra MSP board specific pci_ops
- *
- * Copyright 2001 MontaVista Software Inc.
- * Copyright 2005-2007 PMC-Sierra, Inc
- *
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * Much of the code is derived from the original DDB5074 port by
- * Geert Uytterhoeven <geert@linux-m68k.org>
- */
-
-#define PCI_COUNTERS 1
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-
-#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/byteorder.h>
-#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
-#include <asm/mipsmtregs.h>
-#endif
-
-#include <msp_prom.h>
-#include <msp_cic_int.h>
-#include <msp_pci.h>
-#include <msp_regs.h>
-#include <msp_regops.h>
-
-#define PCI_ACCESS_READ 0
-#define PCI_ACCESS_WRITE 1
-
-#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
-static char proc_init;
-extern struct proc_dir_entry *proc_bus_pci_dir;
-unsigned int pci_int_count[32];
-
-static void pci_proc_init(void);
-
-/*****************************************************************************
- *
- * FUNCTION: show_msp_pci_counts
- * _________________________________________________________________________
- *
- * DESCRIPTION: Prints the count of how many times each PCI
- * interrupt has asserted. Can be invoked by the
- * /proc filesystem.
- *
- * INPUTS: m - synthetic file construction data
- * v - iterator
- *
- * RETURNS: 0 or error
- *
- ****************************************************************************/
-static int show_msp_pci_counts(struct seq_file *m, void *v)
-{
- int i;
- unsigned int intcount, total = 0;
-
- for (i = 0; i < 32; ++i) {
- intcount = pci_int_count[i];
- if (intcount != 0) {
- seq_printf(m, "[%d] = %u\n", i, intcount);
- total += intcount;
- }
- }
-
- seq_printf(m, "total = %u\n", total);
- return 0;
-}
-
-/*****************************************************************************
- *
- * FUNCTION: gen_pci_cfg_wr_show
- * _________________________________________________________________________
- *
- * DESCRIPTION: Generates a configuration write cycle for debug purposes.
- * The IDSEL line asserted and location and data written are
- * immaterial. Just want to be able to prove that a
- * configuration write can be correctly generated on the
- * PCI bus. Intent is that this function by invocable from
- * the /proc filesystem.
- *
- * INPUTS: m - synthetic file construction data
- * v - iterator
- *
- * RETURNS: 0 or error
- *
- ****************************************************************************/
-static int gen_pci_cfg_wr_show(struct seq_file *m, void *v)
-{
- unsigned char where = 0; /* Write to static Device/Vendor ID */
- unsigned char bus_num = 0; /* Bus 0 */
- unsigned char dev_fn = 0xF; /* Arbitrary device number */
- u32 wr_data = 0xFF00AA00; /* Arbitrary data */
- struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
- unsigned long value;
- int intr;
-
- seq_puts(m, "PMC MSP PCI: Beginning\n");
-
- if (proc_init == 0) {
- pci_proc_init();
- proc_init = ~0;
- }
-
- seq_puts(m, "PMC MSP PCI: Before Cfg Wr\n");
-
- /*
- * Generate PCI Configuration Write Cycle
- */
-
- /* Clear cause register bits */
- preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F);
-
- /* Setup address that is to appear on PCI bus */
- preg->config_addr = BPCI_CFGADDR_ENABLE |
- (bus_num << BPCI_CFGADDR_BUSNUM_SHF) |
- (dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) |
- (where & 0xFC);
-
- value = cpu_to_le32(wr_data);
-
- /* Launch the PCI configuration write cycle */
- *PCI_CONFIG_SPACE_REG = value;
-
- /*
- * Check if the PCI configuration cycle (rd or wr) succeeded, by
- * checking the status bits for errors like master or target abort.
- */
- intr = preg->if_status;
-
- seq_puts(m, "PMC MSP PCI: After Cfg Wr\n");
- return 0;
-}
-
-/*****************************************************************************
- *
- * FUNCTION: pci_proc_init
- * _________________________________________________________________________
- *
- * DESCRIPTION: Create entries in the /proc filesystem for debug access.
- *
- * INPUTS: none
- *
- * OUTPUTS: none
- *
- * RETURNS: none
- *
- ****************************************************************************/
-static void pci_proc_init(void)
-{
- proc_create_single("pmc_msp_pci_rd_cnt", 0, NULL, show_msp_pci_counts);
- proc_create_single("pmc_msp_pci_cfg_wr", 0, NULL, gen_pci_cfg_wr_show);
-}
-#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
-
-/*****************************************************************************
- *
- * STRUCT: pci_io_resource
- * _________________________________________________________________________
- *
- * DESCRIPTION: Defines the address range that pciauto() will use to
- * assign to the I/O BARs of PCI devices.
- *
- * Use the start and end addresses of the MSP7120 PCI Host
- * Controller I/O space, in the form that they appear on the
- * PCI bus AFTER MSP7120 has performed address translation.
- *
- * For I/O accesses, MSP7120 ignores OATRAN and maps I/O
- * accesses into the bottom 0xFFF region of address space,
- * so that is the range to put into the pci_io_resource
- * struct.
- *
- * In MSP4200, the start address was 0x04 instead of the
- * expected 0x00. Will just assume there was a good reason
- * for this!
- *
- * NOTES: Linux, by default, will assign I/O space to the lowest
- * region of address space. Since MSP7120 and Linux,
- * by default, have no offset in between how they map, the
- * io_offset element of pci_controller struct should be set
- * to zero.
- * ELEMENTS:
- * name - String used for a meaningful name.
- *
- * start - Start address of MSP7120's I/O space, as MSP7120 presents
- * the address on the PCI bus.
- *
- * end - End address of MSP7120's I/O space, as MSP7120 presents
- * the address on the PCI bus.
- *
- * flags - Attributes indicating the type of resource. In this case,
- * indicate I/O space.
- *
- ****************************************************************************/
-static struct resource pci_io_resource = {
- .name = "pci IO space",
- .start = 0x04,
- .end = 0x0FFF,
- .flags = IORESOURCE_IO /* I/O space */
-};
-
-/*****************************************************************************
- *
- * STRUCT: pci_mem_resource
- * _________________________________________________________________________
- *
- * DESCRIPTION: Defines the address range that pciauto() will use to
- * assign to the memory BARs of PCI devices.
- *
- * The .start and .end values are dependent upon how address
- * translation is performed by the OATRAN regiser.
- *
- * The values to use for .start and .end are the values
- * in the form they appear on the PCI bus AFTER MSP7120 has
- * performed OATRAN address translation.
- *
- * ELEMENTS:
- * name - String used for a meaningful name.
- *
- * start - Start address of MSP7120's memory space, as MSP7120 presents
- * the address on the PCI bus.
- *
- * end - End address of MSP7120's memory space, as MSP7120 presents
- * the address on the PCI bus.
- *
- * flags - Attributes indicating the type of resource. In this case,
- * indicate memory space.
- *
- ****************************************************************************/
-static struct resource pci_mem_resource = {
- .name = "pci memory space",
- .start = MSP_PCI_SPACE_BASE,
- .end = MSP_PCI_SPACE_END,
- .flags = IORESOURCE_MEM /* memory space */
-};
-
-/*****************************************************************************
- *
- * FUNCTION: bpci_interrupt
- * _________________________________________________________________________
- *
- * DESCRIPTION: PCI status interrupt handler. Updates the count of how
- * many times each status bit has been set, then clears
- * the status bits. If the appropriate macros are defined,
- * these counts can be viewed via the /proc filesystem.
- *
- * INPUTS: irq - unused
- * dev_id - unused
- * pt_regs - unused
- *
- * OUTPUTS: none
- *
- * RETURNS: PCIBIOS_SUCCESSFUL - success
- *
- ****************************************************************************/
-static irqreturn_t bpci_interrupt(int irq, void *dev_id)
-{
- struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
- unsigned int stat = preg->if_status;
-
-#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
- int i;
- for (i = 0; i < 32; ++i) {
- if ((1 << i) & stat)
- ++pci_int_count[i];
- }
-#endif /* PROC_FS && PCI_COUNTERS */
-
- /* printk("PCI ISR: Status=%08X\n", stat); */
-
- /* write to clear all asserted interrupts */
- preg->if_status = stat;
-
- return IRQ_HANDLED;
-}
-
-/*****************************************************************************
- *
- * FUNCTION: msp_pcibios_config_access
- * _________________________________________________________________________
- *
- * DESCRIPTION: Performs a PCI configuration access (rd or wr), then
- * checks that the access succeeded by querying MSP7120's
- * PCI status bits.
- *
- * INPUTS:
- * access_type - kind of PCI configuration cycle to perform
- * (read or write). Legal values are
- * PCI_ACCESS_WRITE and PCI_ACCESS_READ.
- *
- * bus - pointer to the bus number of the device to
- * be targeted for the configuration cycle.
- * The only element of the pci_bus structure
- * used is bus->number. This argument determines
- * if the configuration access will be Type 0 or
- * Type 1. Since MSP7120 assumes itself to be the
- * PCI Host, any non-zero bus->number generates
- * a Type 1 access.
- *
- * devfn - this is an 8-bit field. The lower three bits
- * specify the function number of the device to
- * be targeted for the configuration cycle, with
- * all three-bit combinations being legal. The
- * upper five bits specify the device number,
- * with legal values being 10 to 31.
- *
- * where - address within the Configuration Header
- * space to access.
- *
- * data - for write accesses, contains the data to
- * write.
- *
- * OUTPUTS:
- * data - for read accesses, contains the value read.
- *
- * RETURNS: PCIBIOS_SUCCESSFUL - success
- * -1 - access failure
- *
- ****************************************************************************/
-int msp_pcibios_config_access(unsigned char access_type,
- struct pci_bus *bus,
- unsigned int devfn,
- unsigned char where,
- u32 *data)
-{
- struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
- unsigned char bus_num = bus->number;
- unsigned char dev_fn = (unsigned char)devfn;
- unsigned long intr;
- unsigned long value;
- static char pciirqflag;
- int ret;
-#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
- unsigned int vpe_status;
-#endif
-
-#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
- if (proc_init == 0) {
- pci_proc_init();
- proc_init = ~0;
- }
-#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
-
- /*
- * Just the first time this function invokes, allocate
- * an interrupt line for PCI host status interrupts. The
- * allocation assigns an interrupt handler to the interrupt.
- */
- if (pciirqflag == 0) {
- ret = request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */
- bpci_interrupt,
- IRQF_SHARED,
- "PMC MSP PCI Host",
- preg);
- if (ret != 0)
- return ret;
- pciirqflag = ~0;
- }
-
-#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
- vpe_status = dvpe();
-#endif
-
- /*
- * Clear PCI cause register bits.
- *
- * In Polo, the PCI Host had a dedicated DMA called the
- * Block Copy (not to be confused with the general purpose Block
- * Copy Engine block). There appear to have been special interrupts
- * for this Block Copy, called Block Copy 0 Fault (BC0F) and
- * Block Copy 1 Fault (BC1F). MSP4200 and MSP7120 don't have this
- * dedicated Block Copy block, so these two interrupts are now
- * marked reserved. In case the Block Copy is resurrected in a
- * future design, maintain the code that treats these two interrupts
- * specially.
- *
- * Write to clear all interrupts in the PCI status register, aside
- * from BC0F and BC1F.
- */
- preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F);
-
- /* Setup address that is to appear on PCI bus */
- preg->config_addr = BPCI_CFGADDR_ENABLE |
- (bus_num << BPCI_CFGADDR_BUSNUM_SHF) |
- (dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) |
- (where & 0xFC);
-
- /* IF access is a PCI configuration write */
- if (access_type == PCI_ACCESS_WRITE) {
- value = cpu_to_le32(*data);
- *PCI_CONFIG_SPACE_REG = value;
- } else {
- /* ELSE access is a PCI configuration read */
- value = le32_to_cpu(*PCI_CONFIG_SPACE_REG);
- *data = value;
- }
-
- /*
- * Check if the PCI configuration cycle (rd or wr) succeeded, by
- * checking the status bits for errors like master or target abort.
- */
- intr = preg->if_status;
-
- /* Clear config access */
- preg->config_addr = 0;
-
- /* IF error occurred */
- if (intr & ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F)) {
- /* Clear status bits */
- preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F);
-
-#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
- evpe(vpe_status);
-#endif
-
- return -1;
- }
-
-#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
- evpe(vpe_status);
-#endif
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*****************************************************************************
- *
- * FUNCTION: msp_pcibios_read_config_byte
- * _________________________________________________________________________
- *
- * DESCRIPTION: Read a byte from PCI configuration address spac
- * Since the hardware can't address 8 bit chunks
- * directly, read a 32-bit chunk, then mask off extraneous
- * bits.
- *
- * INPUTS bus - structure containing attributes for the PCI bus
- * that the read is destined for.
- * devfn - device/function combination that the read is
- * destined for.
- * where - register within the Configuration Header space
- * to access.
- *
- * OUTPUTS val - read data
- *
- * RETURNS: PCIBIOS_SUCCESSFUL - success
- * -1 - read access failure
- *
- ****************************************************************************/
-static int
-msp_pcibios_read_config_byte(struct pci_bus *bus,
- unsigned int devfn,
- int where,
- u32 *val)
-{
- u32 data = 0;
-
- /*
- * If the config access did not complete normally (e.g., underwent
- * master abort) do the PCI compliant thing, which is to supply an
- * all ones value.
- */
- if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
- where, &data)) {
- *val = 0xFFFFFFFF;
- return -1;
- }
-
- *val = (data >> ((where & 3) << 3)) & 0x0ff;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*****************************************************************************
- *
- * FUNCTION: msp_pcibios_read_config_word
- * _________________________________________________________________________
- *
- * DESCRIPTION: Read a word (16 bits) from PCI configuration address space.
- * Since the hardware can't address 16 bit chunks
- * directly, read a 32-bit chunk, then mask off extraneous
- * bits.
- *
- * INPUTS bus - structure containing attributes for the PCI bus
- * that the read is destined for.
- * devfn - device/function combination that the read is
- * destined for.
- * where - register within the Configuration Header space
- * to access.
- *
- * OUTPUTS val - read data
- *
- * RETURNS: PCIBIOS_SUCCESSFUL - success
- * PCIBIOS_BAD_REGISTER_NUMBER - bad register address
- * -1 - read access failure
- *
- ****************************************************************************/
-static int
-msp_pcibios_read_config_word(struct pci_bus *bus,
- unsigned int devfn,
- int where,
- u32 *val)
-{
- u32 data = 0;
-
- /* if (where & 1) */ /* Commented out non-compliant code.
- * Should allow word access to configuration
- * registers, with only exception being when
- * the word access would wrap around into
- * the next dword.
- */
- if ((where & 3) == 3) {
- *val = 0xFFFFFFFF;
- return PCIBIOS_BAD_REGISTER_NUMBER;
- }
-
- /*
- * If the config access did not complete normally (e.g., underwent
- * master abort) do the PCI compliant thing, which is to supply an
- * all ones value.
- */
- if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
- where, &data)) {
- *val = 0xFFFFFFFF;
- return -1;
- }
-
- *val = (data >> ((where & 3) << 3)) & 0x0ffff;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*****************************************************************************
- *
- * FUNCTION: msp_pcibios_read_config_dword
- * _________________________________________________________________________
- *
- * DESCRIPTION: Read a double word (32 bits) from PCI configuration
- * address space.
- *
- * INPUTS bus - structure containing attributes for the PCI bus
- * that the read is destined for.
- * devfn - device/function combination that the read is
- * destined for.
- * where - register within the Configuration Header space
- * to access.
- *
- * OUTPUTS val - read data
- *
- * RETURNS: PCIBIOS_SUCCESSFUL - success
- * PCIBIOS_BAD_REGISTER_NUMBER - bad register address
- * -1 - read access failure
- *
- ****************************************************************************/
-static int
-msp_pcibios_read_config_dword(struct pci_bus *bus,
- unsigned int devfn,
- int where,
- u32 *val)
-{
- u32 data = 0;
-
- /* Address must be dword aligned. */
- if (where & 3) {
- *val = 0xFFFFFFFF;
- return PCIBIOS_BAD_REGISTER_NUMBER;
- }
-
- /*
- * If the config access did not complete normally (e.g., underwent
- * master abort) do the PCI compliant thing, which is to supply an
- * all ones value.
- */
- if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
- where, &data)) {
- *val = 0xFFFFFFFF;
- return -1;
- }
-
- *val = data;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*****************************************************************************
- *
- * FUNCTION: msp_pcibios_write_config_byte
- * _________________________________________________________________________
- *
- * DESCRIPTION: Write a byte to PCI configuration address space.
- * Since the hardware can't address 8 bit chunks
- * directly, a read-modify-write is performed.
- *
- * INPUTS bus - structure containing attributes for the PCI bus
- * that the write is destined for.
- * devfn - device/function combination that the write is
- * destined for.
- * where - register within the Configuration Header space
- * to access.
- * val - value to write
- *
- * OUTPUTS none
- *
- * RETURNS: PCIBIOS_SUCCESSFUL - success
- * -1 - write access failure
- *
- ****************************************************************************/
-static int
-msp_pcibios_write_config_byte(struct pci_bus *bus,
- unsigned int devfn,
- int where,
- u8 val)
-{
- u32 data = 0;
-
- /* read config space */
- if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
- where, &data))
- return -1;
-
- /* modify the byte within the dword */
- data = (data & ~(0xff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
-
- /* write back the full dword */
- if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
- where, &data))
- return -1;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*****************************************************************************
- *
- * FUNCTION: msp_pcibios_write_config_word
- * _________________________________________________________________________
- *
- * DESCRIPTION: Write a word (16-bits) to PCI configuration address space.
- * Since the hardware can't address 16 bit chunks
- * directly, a read-modify-write is performed.
- *
- * INPUTS bus - structure containing attributes for the PCI bus
- * that the write is destined for.
- * devfn - device/function combination that the write is
- * destined for.
- * where - register within the Configuration Header space
- * to access.
- * val - value to write
- *
- * OUTPUTS none
- *
- * RETURNS: PCIBIOS_SUCCESSFUL - success
- * PCIBIOS_BAD_REGISTER_NUMBER - bad register address
- * -1 - write access failure
- *
- ****************************************************************************/
-static int
-msp_pcibios_write_config_word(struct pci_bus *bus,
- unsigned int devfn,
- int where,
- u16 val)
-{
- u32 data = 0;
-
- /* Fixed non-compliance: if (where & 1) */
- if ((where & 3) == 3)
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- /* read config space */
- if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
- where, &data))
- return -1;
-
- /* modify the word within the dword */
- data = (data & ~(0xffff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
-
- /* write back the full dword */
- if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
- where, &data))
- return -1;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*****************************************************************************
- *
- * FUNCTION: msp_pcibios_write_config_dword
- * _________________________________________________________________________
- *
- * DESCRIPTION: Write a double word (32-bits) to PCI configuration address
- * space.
- *
- * INPUTS bus - structure containing attributes for the PCI bus
- * that the write is destined for.
- * devfn - device/function combination that the write is
- * destined for.
- * where - register within the Configuration Header space
- * to access.
- * val - value to write
- *
- * OUTPUTS none
- *
- * RETURNS: PCIBIOS_SUCCESSFUL - success
- * PCIBIOS_BAD_REGISTER_NUMBER - bad register address
- * -1 - write access failure
- *
- ****************************************************************************/
-static int
-msp_pcibios_write_config_dword(struct pci_bus *bus,
- unsigned int devfn,
- int where,
- u32 val)
-{
- /* check that address is dword aligned */
- if (where & 3)
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- /* perform write */
- if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
- where, &val))
- return -1;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*****************************************************************************
- *
- * FUNCTION: msp_pcibios_read_config
- * _________________________________________________________________________
- *
- * DESCRIPTION: Interface the PCI configuration read request with
- * the appropriate function, based on how many bytes
- * the read request is.
- *
- * INPUTS bus - structure containing attributes for the PCI bus
- * that the write is destined for.
- * devfn - device/function combination that the write is
- * destined for.
- * where - register within the Configuration Header space
- * to access.
- * size - in units of bytes, should be 1, 2, or 4.
- *
- * OUTPUTS val - value read, with any extraneous bytes masked
- * to zero.
- *
- * RETURNS: PCIBIOS_SUCCESSFUL - success
- * -1 - failure
- *
- ****************************************************************************/
-int
-msp_pcibios_read_config(struct pci_bus *bus,
- unsigned int devfn,
- int where,
- int size,
- u32 *val)
-{
- if (size == 1) {
- if (msp_pcibios_read_config_byte(bus, devfn, where, val)) {
- return -1;
- }
- } else if (size == 2) {
- if (msp_pcibios_read_config_word(bus, devfn, where, val)) {
- return -1;
- }
- } else if (size == 4) {
- if (msp_pcibios_read_config_dword(bus, devfn, where, val)) {
- return -1;
- }
- } else {
- *val = 0xFFFFFFFF;
- return -1;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*****************************************************************************
- *
- * FUNCTION: msp_pcibios_write_config
- * _________________________________________________________________________
- *
- * DESCRIPTION: Interface the PCI configuration write request with
- * the appropriate function, based on how many bytes
- * the read request is.
- *
- * INPUTS bus - structure containing attributes for the PCI bus
- * that the write is destined for.
- * devfn - device/function combination that the write is
- * destined for.
- * where - register within the Configuration Header space
- * to access.
- * size - in units of bytes, should be 1, 2, or 4.
- * val - value to write
- *
- * OUTPUTS: none
- *
- * RETURNS: PCIBIOS_SUCCESSFUL - success
- * -1 - failure
- *
- ****************************************************************************/
-int
-msp_pcibios_write_config(struct pci_bus *bus,
- unsigned int devfn,
- int where,
- int size,
- u32 val)
-{
- if (size == 1) {
- if (msp_pcibios_write_config_byte(bus, devfn,
- where, (u8)(0xFF & val))) {
- return -1;
- }
- } else if (size == 2) {
- if (msp_pcibios_write_config_word(bus, devfn,
- where, (u16)(0xFFFF & val))) {
- return -1;
- }
- } else if (size == 4) {
- if (msp_pcibios_write_config_dword(bus, devfn, where, val)) {
- return -1;
- }
- } else {
- return -1;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*****************************************************************************
- *
- * STRUCTURE: msp_pci_ops
- * _________________________________________________________________________
- *
- * DESCRIPTION: structure to abstract the hardware specific PCI
- * configuration accesses.
- *
- * ELEMENTS:
- * read - function for Linux to generate PCI Configuration reads.
- * write - function for Linux to generate PCI Configuration writes.
- *
- ****************************************************************************/
-struct pci_ops msp_pci_ops = {
- .read = msp_pcibios_read_config,
- .write = msp_pcibios_write_config
-};
-
-/*****************************************************************************
- *
- * STRUCTURE: msp_pci_controller
- * _________________________________________________________________________
- *
- * Describes the attributes of the MSP7120 PCI Host Controller
- *
- * ELEMENTS:
- * pci_ops - abstracts the hardware specific PCI configuration
- * accesses.
- *
- * mem_resource - address range pciauto() uses to assign to PCI device
- * memory BARs.
- *
- * mem_offset - offset between how MSP7120 outbound PCI memory
- * transaction addresses appear on the PCI bus and how Linux
- * wants to configure memory BARs of the PCI devices.
- * MSP7120 does nothing funky, so just set to zero.
- *
- * io_resource - address range pciauto() uses to assign to PCI device
- * I/O BARs.
- *
- * io_offset - offset between how MSP7120 outbound PCI I/O
- * transaction addresses appear on the PCI bus and how
- * Linux defaults to configure I/O BARs of the PCI devices.
- * MSP7120 maps outbound I/O accesses into the bottom
- * bottom 4K of PCI address space (and ignores OATRAN).
- * Since the Linux default is to configure I/O BARs to the
- * bottom 4K, no special offset is needed. Just set to zero.
- *
- ****************************************************************************/
-static struct pci_controller msp_pci_controller = {
- .pci_ops = &msp_pci_ops,
- .mem_resource = &pci_mem_resource,
- .mem_offset = 0,
- .io_map_base = MSP_PCI_IOSPACE_BASE,
- .io_resource = &pci_io_resource,
- .io_offset = 0
-};
-
-/*****************************************************************************
- *
- * FUNCTION: msp_pci_init
- * _________________________________________________________________________
- *
- * DESCRIPTION: Initialize the PCI Host Controller and register it with
- * Linux so Linux can seize control of the PCI bus.
- *
- ****************************************************************************/
-void __init msp_pci_init(void)
-{
- struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
- u32 id;
-
- /* Extract Device ID */
- id = read_reg32(PCI_JTAG_DEVID_REG, 0xFFFF) >> 12;
-
- /* Check if JTAG ID identifies MSP7120 */
- if (!MSP_HAS_PCI(id)) {
- printk(KERN_WARNING "PCI: No PCI; id reads as %x\n", id);
- goto no_pci;
- }
-
- /*
- * Enable flushing of the PCI-SDRAM queue upon a read
- * of the SDRAM's Memory Configuration Register.
- */
- *(unsigned long *)QFLUSH_REG_1 = 3;
-
- /* Configure PCI Host Controller. */
- preg->if_status = ~0; /* Clear cause register bits */
- preg->config_addr = 0; /* Clear config access */
- preg->oatran = MSP_PCI_OATRAN; /* PCI outbound addr translation */
- preg->if_mask = 0xF8BF87C0; /* Enable all PCI status interrupts */
-
- /* configure so inb(), outb(), and family are functional */
- set_io_port_base(MSP_PCI_IOSPACE_BASE);
-
- /* Tell Linux the details of the MSP7120 PCI Host Controller */
- register_pci_controller(&msp_pci_controller);
-
- return;
-
-no_pci:
- /* Disable PCI channel */
- printk(KERN_WARNING "PCI: no host PCI bus detected\n");
-}
diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c
index 01a2af8215c8..7285b5667568 100644
--- a/arch/mips/pci/pci-alchemy.c
+++ b/arch/mips/pci/pci-alchemy.c
@@ -52,7 +52,7 @@ struct alchemy_pci_context {
static struct alchemy_pci_context *__alchemy_pci_ctx;
-/* IO/MEM resources for PCI. Keep the memres in sync with __fixup_bigphys_addr
+/* IO/MEM resources for PCI. Keep the memres in sync with fixup_bigphys_addr
* in arch/mips/alchemy/common/setup.c
*/
static struct resource alchemy_pci_def_memres = {
diff --git a/arch/mips/pci/pci-emma2rh.c b/arch/mips/pci/pci-emma2rh.c
deleted file mode 100644
index 156091a3e341..000000000000
--- a/arch/mips/pci/pci-emma2rh.c
+++ /dev/null
@@ -1,72 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) NEC Electronics Corporation 2004-2006
- *
- * This file is based on the arch/mips/ddb5xxx/ddb5477/pci.c
- *
- * Copyright 2001 MontaVista Software Inc.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-
-#include <asm/bootinfo.h>
-
-#include <asm/emma/emma2rh.h>
-
-static struct resource pci_io_resource = {
- .name = "pci IO space",
- .start = EMMA2RH_PCI_IO_BASE,
- .end = EMMA2RH_PCI_IO_BASE + EMMA2RH_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO,
-};
-
-static struct resource pci_mem_resource = {
- .name = "pci memory space",
- .start = EMMA2RH_PCI_MEM_BASE,
- .end = EMMA2RH_PCI_MEM_BASE + EMMA2RH_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-extern struct pci_ops emma2rh_pci_ops;
-
-static struct pci_controller emma2rh_pci_controller = {
- .pci_ops = &emma2rh_pci_ops,
- .mem_resource = &pci_mem_resource,
- .io_resource = &pci_io_resource,
- .mem_offset = -0x04000000,
- .io_offset = 0,
-};
-
-static void __init emma2rh_pci_init(void)
-{
- /* setup PCI interface */
- emma2rh_out32(EMMA2RH_PCI_ARBIT_CTR, 0x70f);
-
- emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, 0x80000a18);
- emma2rh_out32(EMMA2RH_PCI_CONFIG_BASE + PCI_COMMAND,
- PCI_STATUS_DEVSEL_MEDIUM | PCI_STATUS_CAP_LIST |
- PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
- emma2rh_out32(EMMA2RH_PCI_CONFIG_BASE + PCI_BASE_ADDRESS_0, 0x10000000);
- emma2rh_out32(EMMA2RH_PCI_CONFIG_BASE + PCI_BASE_ADDRESS_1, 0x00000000);
-
- emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, 0x12000000 | 0x218);
- emma2rh_out32(EMMA2RH_PCI_IWIN1_CTR, 0x18000000 | 0x600);
- emma2rh_out32(EMMA2RH_PCI_INIT_ESWP, 0x00000200);
-
- emma2rh_out32(EMMA2RH_PCI_TWIN_CTR, 0x00009200);
- emma2rh_out32(EMMA2RH_PCI_TWIN_BADR, 0x00000000);
- emma2rh_out32(EMMA2RH_PCI_TWIN0_DADR, 0x00000000);
- emma2rh_out32(EMMA2RH_PCI_TWIN1_DADR, 0x00000000);
-}
-
-static int __init emma2rh_pci_setup(void)
-{
- emma2rh_pci_init();
- register_pci_controller(&emma2rh_pci_controller);
- return 0;
-}
-
-arch_initcall(emma2rh_pci_setup);
diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c
deleted file mode 100644
index 47f4ee6bbb3b..000000000000
--- a/arch/mips/pci/pci-lasat.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000, 2001, 04 Keith M Wesolowski
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/types.h>
-
-#include <asm/lasat/lasat.h>
-
-#include <irq.h>
-
-extern struct pci_ops nile4_pci_ops;
-extern struct pci_ops gt64xxx_pci0_ops;
-static struct resource lasat_pci_mem_resource = {
- .name = "LASAT PCI MEM",
- .start = 0x18000000,
- .end = 0x19ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct resource lasat_pci_io_resource = {
- .name = "LASAT PCI IO",
- .start = 0x1a000000,
- .end = 0x1bffffff,
- .flags = IORESOURCE_IO,
-};
-
-static struct pci_controller lasat_pci_controller = {
- .mem_resource = &lasat_pci_mem_resource,
- .io_resource = &lasat_pci_io_resource,
-};
-
-static int __init lasat_pci_setup(void)
-{
- printk(KERN_DEBUG "PCI: starting\n");
-
- if (IS_LASAT_200())
- lasat_pci_controller.pci_ops = &nile4_pci_ops;
- else
- lasat_pci_controller.pci_ops = &gt64xxx_pci0_ops;
-
- register_pci_controller(&lasat_pci_controller);
-
- return 0;
-}
-
-arch_initcall(lasat_pci_setup);
-
-#define LASAT_IRQ_ETH1 (LASAT_IRQ_BASE + 0)
-#define LASAT_IRQ_ETH0 (LASAT_IRQ_BASE + 1)
-#define LASAT_IRQ_HDC (LASAT_IRQ_BASE + 2)
-#define LASAT_IRQ_COMP (LASAT_IRQ_BASE + 3)
-#define LASAT_IRQ_HDLC (LASAT_IRQ_BASE + 4)
-#define LASAT_IRQ_PCIA (LASAT_IRQ_BASE + 5)
-#define LASAT_IRQ_PCIB (LASAT_IRQ_BASE + 6)
-#define LASAT_IRQ_PCIC (LASAT_IRQ_BASE + 7)
-#define LASAT_IRQ_PCID (LASAT_IRQ_BASE + 8)
-
-int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- switch (slot) {
- case 1:
- case 2:
- case 3:
- return LASAT_IRQ_PCIA + (((slot-1) + (pin-1)) % 4);
- case 4:
- return LASAT_IRQ_ETH1; /* Ethernet 1 (LAN 2) */
- case 5:
- return LASAT_IRQ_ETH0; /* Ethernet 0 (LAN 1) */
- case 6:
- return LASAT_IRQ_HDC; /* IDE controller */
- default:
- return 0xff; /* Illegal */
- }
-
- return -1;
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}
diff --git a/arch/mips/pic32/Platform b/arch/mips/pic32/Platform
index cd2084f44507..1e92e52a137b 100644
--- a/arch/mips/pic32/Platform
+++ b/arch/mips/pic32/Platform
@@ -1,7 +1,6 @@
#
# PIC32MZDA
#
-platform-$(CONFIG_PIC32MZDA) += pic32/
cflags-$(CONFIG_PIC32MZDA) += -I$(srctree)/arch/mips/include/asm/mach-pic32
load-$(CONFIG_PIC32MZDA) += 0xffffffff88000000
all-$(CONFIG_PIC32MZDA) := $(COMPRESSION_FNAME).bin
diff --git a/arch/mips/pistachio/Platform b/arch/mips/pistachio/Platform
index c3592b374ad2..f73a1a929965 100644
--- a/arch/mips/pistachio/Platform
+++ b/arch/mips/pistachio/Platform
@@ -1,7 +1,6 @@
#
# IMG Pistachio SoC
#
-platform-$(CONFIG_MACH_PISTACHIO) += pistachio/
cflags-$(CONFIG_MACH_PISTACHIO) += \
-I$(srctree)/arch/mips/include/asm/mach-pistachio
load-$(CONFIG_MACH_PISTACHIO) += 0xffffffff80400000
diff --git a/arch/mips/pistachio/init.c b/arch/mips/pistachio/init.c
index a09a5da38e6b..558995ed6fe8 100644
--- a/arch/mips/pistachio/init.c
+++ b/arch/mips/pistachio/init.c
@@ -83,12 +83,12 @@ phys_addr_t mips_cdmm_phys_base(void)
static void __init mips_nmi_setup(void)
{
void *base;
- extern char except_vec_nmi;
+ extern char except_vec_nmi[];
base = cpu_has_veic ?
(void *)(CAC_BASE + 0xa80) :
(void *)(CAC_BASE + 0x380);
- memcpy(base, &except_vec_nmi, 0x80);
+ memcpy(base, except_vec_nmi, 0x80);
flush_icache_range((unsigned long)base,
(unsigned long)base + 0x80);
}
@@ -96,12 +96,12 @@ static void __init mips_nmi_setup(void)
static void __init mips_ejtag_setup(void)
{
void *base;
- extern char except_vec_ejtag_debug;
+ extern char except_vec_ejtag_debug[];
base = cpu_has_veic ?
(void *)(CAC_BASE + 0xa00) :
(void *)(CAC_BASE + 0x300);
- memcpy(base, &except_vec_ejtag_debug, 0x80);
+ memcpy(base, except_vec_ejtag_debug, 0x80);
flush_icache_range((unsigned long)base,
(unsigned long)base + 0x80);
}
diff --git a/arch/mips/pmcs-msp71xx/Kconfig b/arch/mips/pmcs-msp71xx/Kconfig
deleted file mode 100644
index b185b7620c97..000000000000
--- a/arch/mips/pmcs-msp71xx/Kconfig
+++ /dev/null
@@ -1,50 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-choice
- prompt "PMC-Sierra MSP SOC type"
- depends on PMC_MSP
-
-config PMC_MSP4200_EVAL
- bool "PMC-Sierra MSP4200 Eval Board"
- select IRQ_MSP_SLP
- select HAVE_PCI
- select MIPS_L1_CACHE_SHIFT_4
-
-config PMC_MSP4200_GW
- bool "PMC-Sierra MSP4200 VoIP Gateway"
- select IRQ_MSP_SLP
- select HAVE_PCI
-
-config PMC_MSP7120_EVAL
- bool "PMC-Sierra MSP7120 Eval Board"
- select SYS_SUPPORTS_MULTITHREADING
- select IRQ_MSP_CIC
- select HAVE_PCI
-
-config PMC_MSP7120_GW
- bool "PMC-Sierra MSP7120 Residential Gateway"
- select SYS_SUPPORTS_MULTITHREADING
- select IRQ_MSP_CIC
- select HAVE_PCI
- select MSP_HAS_USB
- select MSP_ETH
-
-config PMC_MSP7120_FPGA
- bool "PMC-Sierra MSP7120 FPGA"
- select SYS_SUPPORTS_MULTITHREADING
- select IRQ_MSP_CIC
- select HAVE_PCI
-
-endchoice
-
-config MSP_HAS_USB
- bool
- depends on PMC_MSP
-
-config MSP_ETH
- bool
- select MSP_HAS_MAC
- depends on PMC_MSP
-
-config MSP_HAS_MAC
- bool
- depends on PMC_MSP
diff --git a/arch/mips/pmcs-msp71xx/Makefile b/arch/mips/pmcs-msp71xx/Makefile
deleted file mode 100644
index c040bd6ed62d..000000000000
--- a/arch/mips/pmcs-msp71xx/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the PMC-Sierra MSP SOCs
-#
-obj-y += msp_prom.o msp_setup.o msp_irq.o \
- msp_time.o msp_serial.o msp_elb.o
-obj-$(CONFIG_PMC_MSP7120_GW) += msp_hwbutton.o
-obj-$(CONFIG_IRQ_MSP_SLP) += msp_irq_slp.o
-obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o msp_irq_per.o
-obj-$(CONFIG_PCI) += msp_pci.o
-obj-$(CONFIG_MSP_HAS_MAC) += msp_eth.o
-obj-$(CONFIG_MSP_HAS_USB) += msp_usb.o
-obj-$(CONFIG_MIPS_MT_SMP) += msp_smp.o
diff --git a/arch/mips/pmcs-msp71xx/Platform b/arch/mips/pmcs-msp71xx/Platform
deleted file mode 100644
index 7af0734a5007..000000000000
--- a/arch/mips/pmcs-msp71xx/Platform
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# PMC-Sierra MSP SOCs
-#
-platform-$(CONFIG_PMC_MSP) += pmcs-msp71xx/
-cflags-$(CONFIG_PMC_MSP) += -I$(srctree)/arch/mips/include/asm/mach-pmcs-msp71xx \
- -mno-branch-likely
-load-$(CONFIG_PMC_MSP) += 0xffffffff80100000
diff --git a/arch/mips/pmcs-msp71xx/msp_elb.c b/arch/mips/pmcs-msp71xx/msp_elb.c
deleted file mode 100644
index 3e9641007216..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_elb.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Sets up the proper Chip Select configuration registers. It is assumed that
- * PMON sets up the ADDR and MASK registers properly.
- *
- * Copyright 2005-2006 PMC-Sierra, Inc.
- * Author: Marc St-Jean, Marc_St-Jean@pmc-sierra.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <msp_regs.h>
-
-static int __init msp_elb_setup(void)
-{
-#if defined(CONFIG_PMC_MSP7120_GW) \
- || defined(CONFIG_PMC_MSP7120_EVAL)
- /*
- * Force all CNFG to be identical and equal to CS0,
- * according to OPS doc
- */
- *CS1_CNFG_REG = *CS2_CNFG_REG = *CS3_CNFG_REG = *CS0_CNFG_REG;
-#endif
- return 0;
-}
-
-subsys_initcall(msp_elb_setup);
diff --git a/arch/mips/pmcs-msp71xx/msp_eth.c b/arch/mips/pmcs-msp71xx/msp_eth.c
deleted file mode 100644
index 15679b427f44..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_eth.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * The setup file for ethernet related hardware on PMC-Sierra MSP processors.
- *
- * Copyright 2010 PMC-Sierra, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <msp_regs.h>
-#include <msp_int.h>
-#include <msp_gpio_macros.h>
-
-
-#define MSP_ETHERNET_GPIO0 14
-#define MSP_ETHERNET_GPIO1 15
-#define MSP_ETHERNET_GPIO2 16
-
-#define MSP_ETH_ID "pmc_mspeth"
-#define MSP_ETH_SIZE 0xE0
-static struct resource msp_eth0_resources[] = {
- [0] = {
- .start = MSP_MAC0_BASE,
- .end = MSP_MAC0_BASE + MSP_ETH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = MSP_INT_MAC0,
- .end = MSP_INT_MAC0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource msp_eth1_resources[] = {
- [0] = {
- .start = MSP_MAC1_BASE,
- .end = MSP_MAC1_BASE + MSP_ETH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = MSP_INT_MAC1,
- .end = MSP_INT_MAC1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-
-
-static struct platform_device mspeth_device[] = {
- [0] = {
- .name = MSP_ETH_ID,
- .id = 0,
- .num_resources = ARRAY_SIZE(msp_eth0_resources),
- .resource = msp_eth0_resources,
- },
- [1] = {
- .name = MSP_ETH_ID,
- .id = 1,
- .num_resources = ARRAY_SIZE(msp_eth1_resources),
- .resource = msp_eth1_resources,
- },
-
-};
-#define msp_eth_devs mspeth_device
-
-int __init msp_eth_setup(void)
-{
- int i, ret = 0;
-
- /* Configure the GPIO and take the ethernet PHY out of reset */
- msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO0);
- msp_gpio_pin_hi(MSP_ETHERNET_GPIO0);
-
- for (i = 0; i < ARRAY_SIZE(msp_eth_devs); i++) {
- ret = platform_device_register(&msp_eth_devs[i]);
- printk(KERN_INFO "device: %d, return value = %d\n", i, ret);
- if (ret) {
- platform_device_unregister(&msp_eth_devs[i]);
- break;
- }
- }
-
- if (ret)
- printk(KERN_WARNING "Could not initialize "
- "MSPETH device structures.\n");
-
- return ret;
-}
-subsys_initcall(msp_eth_setup);
diff --git a/arch/mips/pmcs-msp71xx/msp_hwbutton.c b/arch/mips/pmcs-msp71xx/msp_hwbutton.c
deleted file mode 100644
index bb57ed9ea2bd..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_hwbutton.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * Sets up interrupt handlers for various hardware switches which are
- * connected to interrupt lines.
- *
- * Copyright 2005-2207 PMC-Sierra, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <msp_int.h>
-#include <msp_regs.h>
-#include <msp_regops.h>
-
-/* For hwbutton_interrupt->initial_state */
-#define HWBUTTON_HI 0x1
-#define HWBUTTON_LO 0x2
-
-/*
- * This struct describes a hardware button
- */
-struct hwbutton_interrupt {
- char *name; /* Name of button */
- int irq; /* Actual LINUX IRQ */
- int eirq; /* Extended IRQ number (0-7) */
- int initial_state; /* The "normal" state of the switch */
- void (*handle_hi)(void *); /* Handler: switch input has gone HI */
- void (*handle_lo)(void *); /* Handler: switch input has gone LO */
- void *data; /* Optional data to pass to handler */
-};
-
-#ifdef CONFIG_PMC_MSP7120_GW
-extern void msp_restart(char *);
-
-static void softreset_push(void *data)
-{
- printk(KERN_WARNING "SOFTRESET switch was pushed\n");
-
- /*
- * In the future you could move this to the release handler,
- * timing the difference between the 'push' and 'release', and only
- * doing this ungraceful restart if the button has been down for
- * a certain amount of time; otherwise doing a graceful restart.
- */
-
- msp_restart(NULL);
-}
-
-static void softreset_release(void *data)
-{
- printk(KERN_WARNING "SOFTRESET switch was released\n");
-
- /* Do nothing */
-}
-
-static void standby_on(void *data)
-{
- printk(KERN_WARNING "STANDBY switch was set to ON (not implemented)\n");
-
- /* TODO: Put board in standby mode */
-}
-
-static void standby_off(void *data)
-{
- printk(KERN_WARNING
- "STANDBY switch was set to OFF (not implemented)\n");
-
- /* TODO: Take out of standby mode */
-}
-
-static struct hwbutton_interrupt softreset_sw = {
- .name = "Softreset button",
- .irq = MSP_INT_EXT0,
- .eirq = 0,
- .initial_state = HWBUTTON_HI,
- .handle_hi = softreset_release,
- .handle_lo = softreset_push,
- .data = NULL,
-};
-
-static struct hwbutton_interrupt standby_sw = {
- .name = "Standby switch",
- .irq = MSP_INT_EXT1,
- .eirq = 1,
- .initial_state = HWBUTTON_HI,
- .handle_hi = standby_off,
- .handle_lo = standby_on,
- .data = NULL,
-};
-#endif /* CONFIG_PMC_MSP7120_GW */
-
-static irqreturn_t hwbutton_handler(int irq, void *data)
-{
- struct hwbutton_interrupt *hirq = data;
- unsigned long cic_ext = *CIC_EXT_CFG_REG;
-
- if (CIC_EXT_IS_ACTIVE_HI(cic_ext, hirq->eirq)) {
- /* Interrupt: pin is now HI */
- CIC_EXT_SET_ACTIVE_LO(cic_ext, hirq->eirq);
- hirq->handle_hi(hirq->data);
- } else {
- /* Interrupt: pin is now LO */
- CIC_EXT_SET_ACTIVE_HI(cic_ext, hirq->eirq);
- hirq->handle_lo(hirq->data);
- }
-
- /*
- * Invert the POLARITY of this level interrupt to ack the interrupt
- * Thus next state change will invoke the opposite message
- */
- *CIC_EXT_CFG_REG = cic_ext;
-
- return IRQ_HANDLED;
-}
-
-static int msp_hwbutton_register(struct hwbutton_interrupt *hirq)
-{
- unsigned long cic_ext;
-
- if (hirq->handle_hi == NULL || hirq->handle_lo == NULL)
- return -EINVAL;
-
- cic_ext = *CIC_EXT_CFG_REG;
- CIC_EXT_SET_TRIGGER_LEVEL(cic_ext, hirq->eirq);
- if (hirq->initial_state == HWBUTTON_HI)
- CIC_EXT_SET_ACTIVE_LO(cic_ext, hirq->eirq);
- else
- CIC_EXT_SET_ACTIVE_HI(cic_ext, hirq->eirq);
- *CIC_EXT_CFG_REG = cic_ext;
-
- return request_irq(hirq->irq, hwbutton_handler, 0,
- hirq->name, hirq);
-}
-
-static int __init msp_hwbutton_setup(void)
-{
-#ifdef CONFIG_PMC_MSP7120_GW
- msp_hwbutton_register(&softreset_sw);
- msp_hwbutton_register(&standby_sw);
-#endif
- return 0;
-}
-
-subsys_initcall(msp_hwbutton_setup);
diff --git a/arch/mips/pmcs-msp71xx/msp_irq.c b/arch/mips/pmcs-msp71xx/msp_irq.c
deleted file mode 100644
index d525cc931d89..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_irq.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * IRQ vector handles
- *
- * Copyright (C) 1995, 1996, 1997, 2003 by Ralf Baechle
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/ptrace.h>
-#include <linux/time.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/setup.h>
-
-#include <msp_int.h>
-
-/* SLP bases systems */
-extern void msp_slp_irq_init(void);
-extern void msp_slp_irq_dispatch(void);
-
-/* CIC based systems */
-extern void msp_cic_irq_init(void);
-extern void msp_cic_irq_dispatch(void);
-
-/* VSMP support init */
-extern void msp_vsmp_int_init(void);
-
-/* vectored interrupt implementation */
-
-/* SW0/1 interrupts are used for SMP */
-static inline void mac0_int_dispatch(void) { do_IRQ(MSP_INT_MAC0); }
-static inline void mac1_int_dispatch(void) { do_IRQ(MSP_INT_MAC1); }
-static inline void mac2_int_dispatch(void) { do_IRQ(MSP_INT_SAR); }
-static inline void usb_int_dispatch(void) { do_IRQ(MSP_INT_USB); }
-static inline void sec_int_dispatch(void) { do_IRQ(MSP_INT_SEC); }
-
-/*
- * The PMC-Sierra MSP interrupts are arranged in a 3 level cascaded
- * hierarchical system. The first level are the direct MIPS interrupts
- * and are assigned the interrupt range 0-7. The second level is the SLM
- * interrupt controller and is assigned the range 8-39. The third level
- * comprises the Peripherial block, the PCI block, the PCI MSI block and
- * the SLP. The PCI interrupts and the SLP errors are handled by the
- * relevant subsystems so the core interrupt code needs only concern
- * itself with the Peripheral block. These are assigned interrupts in
- * the range 40-71.
- */
-
-asmlinkage void plat_irq_dispatch(void)
-{
- u32 pending;
-
- pending = read_c0_status() & read_c0_cause();
-
- /*
- * jump to the correct interrupt routine
- * These are arranged in priority order and the timer
- * comes first!
- */
-
-#ifdef CONFIG_IRQ_MSP_CIC /* break out the CIC stuff for now */
- if (pending & C_IRQ4) /* do the peripherals first, that's the timer */
- msp_cic_irq_dispatch();
-
- else if (pending & C_IRQ0)
- do_IRQ(MSP_INT_MAC0);
-
- else if (pending & C_IRQ1)
- do_IRQ(MSP_INT_MAC1);
-
- else if (pending & C_IRQ2)
- do_IRQ(MSP_INT_USB);
-
- else if (pending & C_IRQ3)
- do_IRQ(MSP_INT_SAR);
-
- else if (pending & C_IRQ5)
- do_IRQ(MSP_INT_SEC);
-
-#else
- if (pending & C_IRQ5)
- do_IRQ(MSP_INT_TIMER);
-
- else if (pending & C_IRQ0)
- do_IRQ(MSP_INT_MAC0);
-
- else if (pending & C_IRQ1)
- do_IRQ(MSP_INT_MAC1);
-
- else if (pending & C_IRQ3)
- do_IRQ(MSP_INT_VE);
-
- else if (pending & C_IRQ4)
- msp_slp_irq_dispatch();
-#endif
-
- else if (pending & C_SW0) /* do software after hardware */
- do_IRQ(MSP_INT_SW0);
-
- else if (pending & C_SW1)
- do_IRQ(MSP_INT_SW1);
-}
-
-void __init arch_init_irq(void)
-{
- /* assume we'll be using vectored interrupt mode except in UP mode*/
-#ifdef CONFIG_MIPS_MT
- BUG_ON(!cpu_has_vint);
-#endif
- /* initialize the 1st-level CPU based interrupt controller */
- mips_cpu_irq_init();
-
-#ifdef CONFIG_IRQ_MSP_CIC
- msp_cic_irq_init();
-#ifdef CONFIG_MIPS_MT
- set_vi_handler(MSP_INT_CIC, msp_cic_irq_dispatch);
- set_vi_handler(MSP_INT_MAC0, mac0_int_dispatch);
- set_vi_handler(MSP_INT_MAC1, mac1_int_dispatch);
- set_vi_handler(MSP_INT_SAR, mac2_int_dispatch);
- set_vi_handler(MSP_INT_USB, usb_int_dispatch);
- set_vi_handler(MSP_INT_SEC, sec_int_dispatch);
-#ifdef CONFIG_MIPS_MT_SMP
- msp_vsmp_int_init();
-#endif /* CONFIG_MIPS_MT_SMP */
-#endif /* CONFIG_MIPS_MT */
- /* setup the cascaded interrupts */
- if (request_irq(MSP_INT_CIC, no_action, IRQF_NO_THREAD,
- "MSP CIC cascade", NULL))
- pr_err("Failed to register MSP CIC cascade interrupt\n");
- if (request_irq(MSP_INT_PER, no_action, IRQF_NO_THREAD,
- "MSP PER cascade", NULL))
- pr_err("Failed to register MSP PER cascade interrupt\n");
-
-#else
- /*
- * Setup the 2nd-level SLP register based interrupt controller.
- * VSMP support support is not enabled for SLP.
- */
- msp_slp_irq_init();
-
- /* setup the cascaded SLP/PER interrupts */
- if (request_irq(MSP_INT_SLP, no_action, IRQF_NO_THREAD,
- "MSP CIC cascade", NULL))
- pr_err("Failed to register MSP CIC cascade interrupt\n");
- if (request_irq(MSP_INT_PER, no_action, IRQF_NO_THREAD,
- "MSP PER cascade", NULL))
- pr_err("Failed to register MSP PER cascade interrupt\n");
-#endif
-}
diff --git a/arch/mips/pmcs-msp71xx/msp_irq_cic.c b/arch/mips/pmcs-msp71xx/msp_irq_cic.c
deleted file mode 100644
index 0706010cc99f..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_irq_cic.c
+++ /dev/null
@@ -1,208 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2010 PMC-Sierra, Inc, derived from irq_cpu.c
- *
- * This file define the irq handler for MSP CIC subsystem interrupts.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/bitops.h>
-#include <linux/irq.h>
-
-#include <asm/mipsregs.h>
-
-#include <msp_cic_int.h>
-#include <msp_regs.h>
-
-/*
- * External API
- */
-extern void msp_per_irq_init(void);
-extern void msp_per_irq_dispatch(void);
-
-
-/*
- * Convenience Macro. Should be somewhere generic.
- */
-#define get_current_vpe() \
- ((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE)
-
-#ifdef CONFIG_SMP
-
-#define LOCK_VPE(flags, mtflags) \
-do { \
- local_irq_save(flags); \
- mtflags = dmt(); \
-} while (0)
-
-#define UNLOCK_VPE(flags, mtflags) \
-do { \
- emt(mtflags); \
- local_irq_restore(flags);\
-} while (0)
-
-#define LOCK_CORE(flags, mtflags) \
-do { \
- local_irq_save(flags); \
- mtflags = dvpe(); \
-} while (0)
-
-#define UNLOCK_CORE(flags, mtflags) \
-do { \
- evpe(mtflags); \
- local_irq_restore(flags);\
-} while (0)
-
-#else
-
-#define LOCK_VPE(flags, mtflags)
-#define UNLOCK_VPE(flags, mtflags)
-#endif
-
-/* ensure writes to cic are completed */
-static inline void cic_wmb(void)
-{
- const volatile void __iomem *cic_mem = CIC_VPE0_MSK_REG;
- volatile u32 dummy_read;
-
- wmb();
- dummy_read = __raw_readl(cic_mem);
- dummy_read++;
-}
-
-static void unmask_cic_irq(struct irq_data *d)
-{
- volatile u32 *cic_msk_reg = CIC_VPE0_MSK_REG;
- int vpe;
-#ifdef CONFIG_SMP
- unsigned int mtflags;
- unsigned long flags;
-
- /*
- * Make sure we have IRQ affinity. It may have changed while
- * we were processing the IRQ.
- */
- if (!cpumask_test_cpu(smp_processor_id(),
- irq_data_get_affinity_mask(d)))
- return;
-#endif
-
- vpe = get_current_vpe();
- LOCK_VPE(flags, mtflags);
- cic_msk_reg[vpe] |= (1 << (d->irq - MSP_CIC_INTBASE));
- UNLOCK_VPE(flags, mtflags);
- cic_wmb();
-}
-
-static void mask_cic_irq(struct irq_data *d)
-{
- volatile u32 *cic_msk_reg = CIC_VPE0_MSK_REG;
- int vpe = get_current_vpe();
-#ifdef CONFIG_SMP
- unsigned long flags, mtflags;
-#endif
- LOCK_VPE(flags, mtflags);
- cic_msk_reg[vpe] &= ~(1 << (d->irq - MSP_CIC_INTBASE));
- UNLOCK_VPE(flags, mtflags);
- cic_wmb();
-}
-static void msp_cic_irq_ack(struct irq_data *d)
-{
- mask_cic_irq(d);
- /*
- * Only really necessary for 18, 16-14 and sometimes 3:0
- * (since these can be edge sensitive) but it doesn't
- * hurt for the others
- */
- *CIC_STS_REG = (1 << (d->irq - MSP_CIC_INTBASE));
-}
-
-/* Note: Limiting to VSMP. */
-
-#ifdef CONFIG_MIPS_MT_SMP
-static int msp_cic_irq_set_affinity(struct irq_data *d,
- const struct cpumask *cpumask, bool force)
-{
- int cpu;
- unsigned long flags;
- unsigned int mtflags;
- unsigned long imask = (1 << (d->irq - MSP_CIC_INTBASE));
- volatile u32 *cic_mask = (volatile u32 *)CIC_VPE0_MSK_REG;
-
- /* timer balancing should be disabled in kernel code */
- BUG_ON(d->irq == MSP_INT_VPE0_TIMER || d->irq == MSP_INT_VPE1_TIMER);
-
- LOCK_CORE(flags, mtflags);
- /* enable if any of each VPE's TCs require this IRQ */
- for_each_online_cpu(cpu) {
- if (cpumask_test_cpu(cpu, cpumask))
- cic_mask[cpu] |= imask;
- else
- cic_mask[cpu] &= ~imask;
-
- }
-
- UNLOCK_CORE(flags, mtflags);
- return 0;
-
-}
-#endif
-
-static struct irq_chip msp_cic_irq_controller = {
- .name = "MSP_CIC",
- .irq_mask = mask_cic_irq,
- .irq_mask_ack = msp_cic_irq_ack,
- .irq_unmask = unmask_cic_irq,
- .irq_ack = msp_cic_irq_ack,
-#ifdef CONFIG_MIPS_MT_SMP
- .irq_set_affinity = msp_cic_irq_set_affinity,
-#endif
-};
-
-void __init msp_cic_irq_init(void)
-{
- int i;
- /* Mask/clear interrupts. */
- *CIC_VPE0_MSK_REG = 0x00000000;
- *CIC_VPE1_MSK_REG = 0x00000000;
- *CIC_STS_REG = 0xFFFFFFFF;
- /*
- * The MSP7120 RG and EVBD boards use IRQ[6:4] for PCI.
- * These inputs map to EXT_INT_POL[6:4] inside the CIC.
- * They are to be active low, level sensitive.
- */
- *CIC_EXT_CFG_REG &= 0xFFFF8F8F;
-
- /* initialize all the IRQ descriptors */
- for (i = MSP_CIC_INTBASE ; i < MSP_CIC_INTBASE + 32 ; i++) {
- irq_set_chip_and_handler(i, &msp_cic_irq_controller,
- handle_level_irq);
- }
-
- /* Initialize the PER interrupt sub-system */
- msp_per_irq_init();
-}
-
-/* CIC masked by CIC vector processing before dispatch called */
-void msp_cic_irq_dispatch(void)
-{
- volatile u32 *cic_msk_reg = (volatile u32 *)CIC_VPE0_MSK_REG;
- u32 cic_mask;
- u32 pending;
- int cic_status = *CIC_STS_REG;
- cic_mask = cic_msk_reg[get_current_vpe()];
- pending = cic_status & cic_mask;
- if (pending & (1 << (MSP_INT_VPE0_TIMER - MSP_CIC_INTBASE))) {
- do_IRQ(MSP_INT_VPE0_TIMER);
- } else if (pending & (1 << (MSP_INT_VPE1_TIMER - MSP_CIC_INTBASE))) {
- do_IRQ(MSP_INT_VPE1_TIMER);
- } else if (pending & (1 << (MSP_INT_PER - MSP_CIC_INTBASE))) {
- msp_per_irq_dispatch();
- } else if (pending) {
- do_IRQ(ffs(pending) + MSP_CIC_INTBASE - 1);
- } else{
- spurious_interrupt();
- }
-}
diff --git a/arch/mips/pmcs-msp71xx/msp_irq_per.c b/arch/mips/pmcs-msp71xx/msp_irq_per.c
deleted file mode 100644
index b284412b2923..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_irq_per.c
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2010 PMC-Sierra, Inc, derived from irq_cpu.c
- *
- * This file define the irq handler for MSP PER subsystem interrupts.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/bitops.h>
-
-#include <asm/mipsregs.h>
-
-#include <msp_cic_int.h>
-#include <msp_regs.h>
-
-
-/*
- * Convenience Macro. Should be somewhere generic.
- */
-#define get_current_vpe() \
- ((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE)
-
-#ifdef CONFIG_SMP
-/*
- * The PER registers must be protected from concurrent access.
- */
-
-static DEFINE_SPINLOCK(per_lock);
-#endif
-
-/* ensure writes to per are completed */
-
-static inline void per_wmb(void)
-{
- const volatile void __iomem *per_mem = PER_INT_MSK_REG;
- volatile u32 dummy_read;
-
- wmb();
- dummy_read = __raw_readl(per_mem);
- dummy_read++;
-}
-
-static inline void unmask_per_irq(struct irq_data *d)
-{
-#ifdef CONFIG_SMP
- unsigned long flags;
- spin_lock_irqsave(&per_lock, flags);
- *PER_INT_MSK_REG |= (1 << (d->irq - MSP_PER_INTBASE));
- spin_unlock_irqrestore(&per_lock, flags);
-#else
- *PER_INT_MSK_REG |= (1 << (d->irq - MSP_PER_INTBASE));
-#endif
- per_wmb();
-}
-
-static inline void mask_per_irq(struct irq_data *d)
-{
-#ifdef CONFIG_SMP
- unsigned long flags;
- spin_lock_irqsave(&per_lock, flags);
- *PER_INT_MSK_REG &= ~(1 << (d->irq - MSP_PER_INTBASE));
- spin_unlock_irqrestore(&per_lock, flags);
-#else
- *PER_INT_MSK_REG &= ~(1 << (d->irq - MSP_PER_INTBASE));
-#endif
- per_wmb();
-}
-
-static inline void msp_per_irq_ack(struct irq_data *d)
-{
- mask_per_irq(d);
- /*
- * In the PER interrupt controller, only bits 11 and 10
- * are write-to-clear, (SPI TX complete, SPI RX complete).
- * It does nothing for any others.
- */
- *PER_INT_STS_REG = (1 << (d->irq - MSP_PER_INTBASE));
-}
-
-#ifdef CONFIG_SMP
-static int msp_per_irq_set_affinity(struct irq_data *d,
- const struct cpumask *affinity, bool force)
-{
- /* WTF is this doing ????? */
- unmask_per_irq(d);
- return 0;
-}
-#endif
-
-static struct irq_chip msp_per_irq_controller = {
- .name = "MSP_PER",
- .irq_enable = unmask_per_irq,
- .irq_disable = mask_per_irq,
- .irq_ack = msp_per_irq_ack,
-#ifdef CONFIG_SMP
- .irq_set_affinity = msp_per_irq_set_affinity,
-#endif
-};
-
-void __init msp_per_irq_init(void)
-{
- int i;
- /* Mask/clear interrupts. */
- *PER_INT_MSK_REG = 0x00000000;
- *PER_INT_STS_REG = 0xFFFFFFFF;
- /* initialize all the IRQ descriptors */
- for (i = MSP_PER_INTBASE; i < MSP_PER_INTBASE + 32; i++) {
- irq_set_chip(i, &msp_per_irq_controller);
- }
-}
-
-void msp_per_irq_dispatch(void)
-{
- u32 per_mask = *PER_INT_MSK_REG;
- u32 per_status = *PER_INT_STS_REG;
- u32 pending;
-
- pending = per_status & per_mask;
- if (pending) {
- do_IRQ(ffs(pending) + MSP_PER_INTBASE - 1);
- } else {
- spurious_interrupt();
- }
-}
diff --git a/arch/mips/pmcs-msp71xx/msp_irq_slp.c b/arch/mips/pmcs-msp71xx/msp_irq_slp.c
deleted file mode 100644
index 097a5fd3b06b..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_irq_slp.c
+++ /dev/null
@@ -1,102 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * This file define the irq handler for MSP SLM subsystem interrupts.
- *
- * Copyright 2005-2006 PMC-Sierra, Inc, derived from irq_cpu.c
- * Author: Andrew Hughes, Andrew_Hughes@pmc-sierra.com
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/bitops.h>
-
-#include <asm/mipsregs.h>
-
-#include <msp_slp_int.h>
-#include <msp_regs.h>
-
-static inline void unmask_msp_slp_irq(struct irq_data *d)
-{
- unsigned int irq = d->irq;
-
- /* check for PER interrupt range */
- if (irq < MSP_PER_INTBASE)
- *SLP_INT_MSK_REG |= (1 << (irq - MSP_SLP_INTBASE));
- else
- *PER_INT_MSK_REG |= (1 << (irq - MSP_PER_INTBASE));
-}
-
-static inline void mask_msp_slp_irq(struct irq_data *d)
-{
- unsigned int irq = d->irq;
-
- /* check for PER interrupt range */
- if (irq < MSP_PER_INTBASE)
- *SLP_INT_MSK_REG &= ~(1 << (irq - MSP_SLP_INTBASE));
- else
- *PER_INT_MSK_REG &= ~(1 << (irq - MSP_PER_INTBASE));
-}
-
-/*
- * While we ack the interrupt interrupts are disabled and thus we don't need
- * to deal with concurrency issues. Same for msp_slp_irq_end.
- */
-static inline void ack_msp_slp_irq(struct irq_data *d)
-{
- unsigned int irq = d->irq;
-
- /* check for PER interrupt range */
- if (irq < MSP_PER_INTBASE)
- *SLP_INT_STS_REG = (1 << (irq - MSP_SLP_INTBASE));
- else
- *PER_INT_STS_REG = (1 << (irq - MSP_PER_INTBASE));
-}
-
-static struct irq_chip msp_slp_irq_controller = {
- .name = "MSP_SLP",
- .irq_ack = ack_msp_slp_irq,
- .irq_mask = mask_msp_slp_irq,
- .irq_unmask = unmask_msp_slp_irq,
-};
-
-void __init msp_slp_irq_init(void)
-{
- int i;
-
- /* Mask/clear interrupts. */
- *SLP_INT_MSK_REG = 0x00000000;
- *PER_INT_MSK_REG = 0x00000000;
- *SLP_INT_STS_REG = 0xFFFFFFFF;
- *PER_INT_STS_REG = 0xFFFFFFFF;
-
- /* initialize all the IRQ descriptors */
- for (i = MSP_SLP_INTBASE; i < MSP_PER_INTBASE + 32; i++)
- irq_set_chip_and_handler(i, &msp_slp_irq_controller,
- handle_level_irq);
-}
-
-void msp_slp_irq_dispatch(void)
-{
- u32 pending;
- int intbase;
-
- intbase = MSP_SLP_INTBASE;
- pending = *SLP_INT_STS_REG & *SLP_INT_MSK_REG;
-
- /* check for PER interrupt */
- if (pending == (1 << (MSP_INT_PER - MSP_SLP_INTBASE))) {
- intbase = MSP_PER_INTBASE;
- pending = *PER_INT_STS_REG & *PER_INT_MSK_REG;
- }
-
- /* check for spurious interrupt */
- if (pending == 0x00000000) {
- printk(KERN_ERR "Spurious %s interrupt?\n",
- (intbase == MSP_SLP_INTBASE) ? "SLP" : "PER");
- return;
- }
-
- /* dispatch the irq */
- do_IRQ(ffs(pending) + intbase - 1);
-}
diff --git a/arch/mips/pmcs-msp71xx/msp_pci.c b/arch/mips/pmcs-msp71xx/msp_pci.c
deleted file mode 100644
index 428dea23c35c..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_pci.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * The setup file for PCI related hardware on PMC-Sierra MSP processors.
- *
- * Copyright 2005-2006 PMC-Sierra, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-
-#include <msp_prom.h>
-#include <msp_regs.h>
-
-extern void msp_pci_init(void);
-
-static int __init msp_pci_setup(void)
-{
-#if 0 /* Linux 2.6 initialization code to be completed */
- if (getdeviceid() & DEV_ID_SINGLE_PC) {
- /* If single card mode */
- slmRegs *sreg = (slmRegs *) SREG_BASE;
-
- sreg->single_pc_enable = SINGLE_PCCARD;
- }
-#endif
-
- msp_pci_init();
-
- return 0;
-}
-
-subsys_initcall(msp_pci_setup);
diff --git a/arch/mips/pmcs-msp71xx/msp_prom.c b/arch/mips/pmcs-msp71xx/msp_prom.c
deleted file mode 100644
index 800a21b8b8b0..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_prom.c
+++ /dev/null
@@ -1,513 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * PROM library initialisation code, assuming a version of
- * pmon is the boot code.
- *
- * Copyright 2000,2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * This file was derived from Carsten Langgaard's
- * arch/mips/mips-boards/xx files.
- *
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <asm-generic/sections.h>
-#include <asm/page.h>
-
-#include <msp_prom.h>
-#include <msp_regs.h>
-
-/* global PROM environment variables and pointers */
-int prom_argc;
-char **prom_argv, **prom_envp;
-int *prom_vec;
-
-/* debug flag */
-int init_debug = 1;
-
-/* memory blocks */
-struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
-
-#define MAX_PROM_MEM 5
-static phys_addr_t prom_mem_base[MAX_PROM_MEM] __initdata;
-static phys_addr_t prom_mem_size[MAX_PROM_MEM] __initdata;
-static unsigned int nr_prom_mem __initdata;
-
-/* default feature sets */
-static char msp_default_features[] =
-#if defined(CONFIG_PMC_MSP4200_EVAL) \
- || defined(CONFIG_PMC_MSP4200_GW)
- "ERER";
-#elif defined(CONFIG_PMC_MSP7120_EVAL) \
- || defined(CONFIG_PMC_MSP7120_GW)
- "EMEMSP";
-#elif defined(CONFIG_PMC_MSP7120_FPGA)
- "EMEM";
-#endif
-
-/* conversion functions */
-static inline unsigned char str2hexnum(unsigned char c)
-{
- if (c >= '0' && c <= '9')
- return c - '0';
- if (c >= 'a' && c <= 'f')
- return c - 'a' + 10;
- return 0; /* foo */
-}
-
-int str2eaddr(unsigned char *ea, unsigned char *str)
-{
- int index = 0;
- unsigned char num = 0;
-
- while (*str != '\0') {
- if ((*str == '.') || (*str == ':')) {
- ea[index++] = num;
- num = 0;
- str++;
- } else {
- num = num << 4;
- num |= str2hexnum(*str++);
- }
- }
-
- if (index == 5) {
- ea[index++] = num;
- return 0;
- } else
- return -1;
-}
-EXPORT_SYMBOL(str2eaddr);
-
-static inline unsigned long str2hex(unsigned char *str)
-{
- int value = 0;
-
- while (*str) {
- value = value << 4;
- value |= str2hexnum(*str++);
- }
-
- return value;
-}
-
-/* function to query the system information */
-const char *get_system_type(void)
-{
-#if defined(CONFIG_PMC_MSP4200_EVAL)
- return "PMC-Sierra MSP4200 Eval Board";
-#elif defined(CONFIG_PMC_MSP4200_GW)
- return "PMC-Sierra MSP4200 VoIP Gateway";
-#elif defined(CONFIG_PMC_MSP7120_EVAL)
- return "PMC-Sierra MSP7120 Eval Board";
-#elif defined(CONFIG_PMC_MSP7120_GW)
- return "PMC-Sierra MSP7120 Residential Gateway";
-#elif defined(CONFIG_PMC_MSP7120_FPGA)
- return "PMC-Sierra MSP7120 FPGA";
-#else
- #error "What is the type of *your* MSP?"
-#endif
-}
-
-int get_ethernet_addr(char *ethaddr_name, char *ethernet_addr)
-{
- char *ethaddr_str;
-
- ethaddr_str = prom_getenv(ethaddr_name);
- if (!ethaddr_str) {
- printk(KERN_WARNING "%s not set in boot prom\n", ethaddr_name);
- return -1;
- }
-
- if (str2eaddr(ethernet_addr, ethaddr_str) == -1) {
- printk(KERN_WARNING "%s badly formatted-<%s>\n",
- ethaddr_name, ethaddr_str);
- return -1;
- }
-
- if (init_debug > 1) {
- int i;
- printk(KERN_DEBUG "get_ethernet_addr: for %s ", ethaddr_name);
- for (i = 0; i < 5; i++)
- printk(KERN_DEBUG "%02x:",
- (unsigned char)*(ethernet_addr+i));
- printk(KERN_DEBUG "%02x\n", *(ethernet_addr+i));
- }
-
- return 0;
-}
-EXPORT_SYMBOL(get_ethernet_addr);
-
-static char *get_features(void)
-{
- char *feature = prom_getenv(FEATURES);
-
- if (feature == NULL) {
- /* default features based on MACHINE_TYPE */
- feature = msp_default_features;
- }
-
- return feature;
-}
-
-static char test_feature(char c)
-{
- char *feature = get_features();
-
- while (*feature) {
- if (*feature++ == c)
- return *feature;
- feature++;
- }
-
- return FEATURE_NOEXIST;
-}
-
-unsigned long get_deviceid(void)
-{
- char *deviceid = prom_getenv(DEVICEID);
-
- if (deviceid == NULL)
- return *DEV_ID_REG;
- else
- return str2hex(deviceid);
-}
-
-char identify_pci(void)
-{
- return test_feature(PCI_KEY);
-}
-EXPORT_SYMBOL(identify_pci);
-
-char identify_pcimux(void)
-{
- return test_feature(PCIMUX_KEY);
-}
-
-char identify_sec(void)
-{
- return test_feature(SEC_KEY);
-}
-EXPORT_SYMBOL(identify_sec);
-
-char identify_spad(void)
-{
- return test_feature(SPAD_KEY);
-}
-EXPORT_SYMBOL(identify_spad);
-
-char identify_tdm(void)
-{
- return test_feature(TDM_KEY);
-}
-EXPORT_SYMBOL(identify_tdm);
-
-char identify_zsp(void)
-{
- return test_feature(ZSP_KEY);
-}
-EXPORT_SYMBOL(identify_zsp);
-
-static char identify_enetfeature(char key, unsigned long interface_num)
-{
- char *feature = get_features();
-
- while (*feature) {
- if (*feature++ == key && interface_num-- == 0)
- return *feature;
- feature++;
- }
-
- return FEATURE_NOEXIST;
-}
-
-char identify_enet(unsigned long interface_num)
-{
- return identify_enetfeature(ENET_KEY, interface_num);
-}
-EXPORT_SYMBOL(identify_enet);
-
-char identify_enetTxD(unsigned long interface_num)
-{
- return identify_enetfeature(ENETTXD_KEY, interface_num);
-}
-EXPORT_SYMBOL(identify_enetTxD);
-
-unsigned long identify_family(void)
-{
- unsigned long deviceid;
-
- deviceid = get_deviceid();
-
- return deviceid & CPU_DEVID_FAMILY;
-}
-EXPORT_SYMBOL(identify_family);
-
-unsigned long identify_revision(void)
-{
- unsigned long deviceid;
-
- deviceid = get_deviceid();
-
- return deviceid & CPU_DEVID_REVISION;
-}
-EXPORT_SYMBOL(identify_revision);
-
-/* PROM environment functions */
-char *prom_getenv(char *env_name)
-{
- /*
- * Return a pointer to the given environment variable. prom_envp
- * points to a null terminated array of pointers to variables.
- * Environment variables are stored in the form of "memsize=64"
- */
-
- char **var = prom_envp;
- int i = strlen(env_name);
-
- while (*var) {
- if (strncmp(env_name, *var, i) == 0) {
- return *var + strlen(env_name) + 1;
- }
- var++;
- }
-
- return NULL;
-}
-
-/* PROM commandline functions */
-void __init prom_init_cmdline(void)
-{
- char *cp;
- int actr;
-
- actr = 1; /* Always ignore argv[0] */
-
- cp = &(arcs_cmdline[0]);
- while (actr < prom_argc) {
- strcpy(cp, prom_argv[actr]);
- cp += strlen(prom_argv[actr]);
- *cp++ = ' ';
- actr++;
- }
- if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
- --cp;
- *cp = '\0';
-}
-
-/* memory allocation functions */
-static int __init prom_memtype_classify(unsigned int type)
-{
- switch (type) {
- case yamon_free:
- return BOOT_MEM_RAM;
- case yamon_prom:
- return BOOT_MEM_ROM_DATA;
- default:
- return BOOT_MEM_RESERVED;
- }
-}
-
-void __init prom_meminit(void)
-{
- struct prom_pmemblock *p;
-
- p = prom_getmdesc();
-
- while (p->size) {
- long type;
- unsigned long base, size;
-
- type = prom_memtype_classify(p->type);
- base = p->base;
- size = p->size;
-
- add_memory_region(base, size, type);
- p++;
-
- if (type == BOOT_MEM_ROM_DATA) {
- if (nr_prom_mem >= MAX_PROM_MEM) {
- pr_err("Too many ROM DATA regions");
- continue;
- }
- prom_mem_base[nr_prom_mem] = base;
- prom_mem_size[nr_prom_mem] = size;
- nr_prom_mem++;
- }
- }
-}
-
-void __init prom_free_prom_memory(void)
-{
- int argc;
- char **argv;
- char **envp;
- char *ptr;
- int len = 0;
- int i;
-
- /*
- * preserve environment variables and command line from pmon/bbload
- * first preserve the command line
- */
- for (argc = 0; argc < prom_argc; argc++) {
- len += sizeof(char *); /* length of pointer */
- len += strlen(prom_argv[argc]) + 1; /* length of string */
- }
- len += sizeof(char *); /* plus length of null pointer */
-
- argv = kmalloc(len, GFP_KERNEL);
- ptr = (char *) &argv[prom_argc + 1]; /* strings follow array */
-
- for (argc = 0; argc < prom_argc; argc++) {
- argv[argc] = ptr;
- strcpy(ptr, prom_argv[argc]);
- ptr += strlen(prom_argv[argc]) + 1;
- }
- argv[prom_argc] = NULL; /* end array with null pointer */
- prom_argv = argv;
-
- /* next preserve the environment variables */
- len = 0;
- i = 0;
- for (envp = prom_envp; *envp != NULL; envp++) {
- i++; /* count number of environment variables */
- len += sizeof(char *); /* length of pointer */
- len += strlen(*envp) + 1; /* length of string */
- }
- len += sizeof(char *); /* plus length of null pointer */
-
- envp = kmalloc(len, GFP_KERNEL);
- ptr = (char *) &envp[i+1];
-
- for (argc = 0; argc < i; argc++) {
- envp[argc] = ptr;
- strcpy(ptr, prom_envp[argc]);
- ptr += strlen(prom_envp[argc]) + 1;
- }
- envp[i] = NULL; /* end array with null pointer */
- prom_envp = envp;
-
- for (i = 0; i < nr_prom_mem; i++) {
- free_init_pages("prom memory",
- prom_mem_base[i], prom_mem_base[i] + prom_mem_size[i]);
- }
-}
-
-struct prom_pmemblock *__init prom_getmdesc(void)
-{
- static char memsz_env[] __initdata = "memsize";
- static char heaptop_env[] __initdata = "heaptop";
- char *str;
- unsigned int memsize;
- unsigned int heaptop;
- int i;
-
- str = prom_getenv(memsz_env);
- if (!str) {
- ppfinit("memsize not set in boot prom, "
- "set to default (32Mb)\n");
- memsize = 0x02000000;
- } else {
- memsize = simple_strtol(str, NULL, 0);
-
- if (memsize == 0) {
- /* if memsize is a bad size, use reasonable default */
- memsize = 0x02000000;
- }
-
- /* convert to physical address (removing caching bits, etc) */
- memsize = CPHYSADDR(memsize);
- }
-
- str = prom_getenv(heaptop_env);
- if (!str) {
- heaptop = CPHYSADDR((u32)&_text);
- ppfinit("heaptop not set in boot prom, "
- "set to default 0x%08x\n", heaptop);
- } else {
- heaptop = simple_strtol(str, NULL, 16);
- if (heaptop == 0) {
- /* heaptop conversion bad, might have 0xValue */
- heaptop = simple_strtol(str, NULL, 0);
-
- if (heaptop == 0) {
- /* heaptop still bad, use reasonable default */
- heaptop = CPHYSADDR((u32)&_text);
- }
- }
-
- /* convert to physical address (removing caching bits, etc) */
- heaptop = CPHYSADDR((u32)heaptop);
- }
-
- /* the base region */
- i = 0;
- mdesc[i].type = BOOT_MEM_RESERVED;
- mdesc[i].base = 0x00000000;
- mdesc[i].size = PAGE_ALIGN(0x300 + 0x80);
- /* jtag interrupt vector + sizeof vector */
-
- /* PMON data */
- if (heaptop > mdesc[i].base + mdesc[i].size) {
- i++; /* 1 */
- mdesc[i].type = BOOT_MEM_ROM_DATA;
- mdesc[i].base = mdesc[i-1].base + mdesc[i-1].size;
- mdesc[i].size = heaptop - mdesc[i].base;
- }
-
- /* end of PMON data to start of kernel -- probably zero .. */
- if (heaptop != CPHYSADDR((u32)_text)) {
- i++; /* 2 */
- mdesc[i].type = BOOT_MEM_RAM;
- mdesc[i].base = heaptop;
- mdesc[i].size = CPHYSADDR((u32)_text) - mdesc[i].base;
- }
-
- /* kernel proper */
- i++; /* 3 */
- mdesc[i].type = BOOT_MEM_RESERVED;
- mdesc[i].base = CPHYSADDR((u32)_text);
- mdesc[i].size = CPHYSADDR(PAGE_ALIGN((u32)_end)) - mdesc[i].base;
-
- /* Remainder of RAM -- under memsize */
- i++; /* 5 */
- mdesc[i].type = yamon_free;
- mdesc[i].base = mdesc[i-1].base + mdesc[i-1].size;
- mdesc[i].size = memsize - mdesc[i].base;
-
- return &mdesc[0];
-}
diff --git a/arch/mips/pmcs-msp71xx/msp_serial.c b/arch/mips/pmcs-msp71xx/msp_serial.c
deleted file mode 100644
index 940c684f6921..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_serial.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * The setup file for serial related hardware on PMC-Sierra MSP processors.
- *
- * Copyright 2005 PMC-Sierra, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-#include <linux/slab.h>
-
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/serial.h>
-#include <linux/serial_8250.h>
-
-#include <msp_prom.h>
-#include <msp_int.h>
-#include <msp_regs.h>
-
-struct msp_uart_data {
- int last_lcr;
-};
-
-static void msp_serial_out(struct uart_port *p, int offset, int value)
-{
- struct msp_uart_data *d = p->private_data;
-
- if (offset == UART_LCR)
- d->last_lcr = value;
-
- offset <<= p->regshift;
- writeb(value, p->membase + offset);
-}
-
-static unsigned int msp_serial_in(struct uart_port *p, int offset)
-{
- offset <<= p->regshift;
-
- return readb(p->membase + offset);
-}
-
-static int msp_serial_handle_irq(struct uart_port *p)
-{
- struct msp_uart_data *d = p->private_data;
- unsigned int iir = readb(p->membase + (UART_IIR << p->regshift));
-
- if (serial8250_handle_irq(p, iir)) {
- return 1;
- } else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
- /*
- * The DesignWare APB UART has an Busy Detect (0x07) interrupt
- * meaning an LCR write attempt occurred while the UART was
- * busy. The interrupt must be cleared by reading the UART
- * status register (USR) and the LCR re-written.
- *
- * Note: MSP reserves 0x20 bytes of address space for the UART
- * and the USR is mapped in a separate block at an offset of
- * 0xc0 from the start of the UART.
- */
- (void)readb(p->membase + 0xc0);
- writeb(d->last_lcr, p->membase + (UART_LCR << p->regshift));
-
- return 1;
- }
-
- return 0;
-}
-
-void __init msp_serial_setup(void)
-{
- char *s;
- char *endp;
- struct uart_port up;
- unsigned int uartclk;
-
- memset(&up, 0, sizeof(up));
-
- /* Check if clock was specified in environment */
- s = prom_getenv("uartfreqhz");
- if(!(s && *s && (uartclk = simple_strtoul(s, &endp, 10)) && *endp == 0))
- uartclk = MSP_BASE_BAUD;
- ppfinit("UART clock set to %d\n", uartclk);
-
- /* Initialize first serial port */
- up.mapbase = MSP_UART0_BASE;
- up.membase = ioremap(up.mapbase, MSP_UART_REG_LEN);
- up.irq = MSP_INT_UART0;
- up.uartclk = uartclk;
- up.regshift = 2;
- up.iotype = UPIO_MEM;
- up.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
- up.type = PORT_16550A;
- up.line = 0;
- up.serial_out = msp_serial_out;
- up.serial_in = msp_serial_in;
- up.handle_irq = msp_serial_handle_irq;
- up.private_data = kzalloc(sizeof(struct msp_uart_data), GFP_KERNEL);
- if (!up.private_data) {
- pr_err("failed to allocate uart private data\n");
- return;
- }
- if (early_serial_setup(&up)) {
- kfree(up.private_data);
- pr_err("Early serial init of port 0 failed\n");
- }
-
- /* Initialize the second serial port, if one exists */
- switch (mips_machtype) {
- case MACH_MSP4200_EVAL:
- case MACH_MSP4200_GW:
- case MACH_MSP4200_FPGA:
- case MACH_MSP7120_EVAL:
- case MACH_MSP7120_GW:
- case MACH_MSP7120_FPGA:
- /* Enable UART1 on MSP4200 and MSP7120 */
- *GPIO_CFG2_REG = 0x00002299;
- break;
-
- default:
- return; /* No second serial port, good-bye. */
- }
-
- up.mapbase = MSP_UART1_BASE;
- up.membase = ioremap(up.mapbase, MSP_UART_REG_LEN);
- up.irq = MSP_INT_UART1;
- up.line = 1;
- up.private_data = (void*)UART1_STATUS_REG;
- if (early_serial_setup(&up)) {
- kfree(up.private_data);
- pr_err("Early serial init of port 1 failed\n");
- }
-}
diff --git a/arch/mips/pmcs-msp71xx/msp_setup.c b/arch/mips/pmcs-msp71xx/msp_setup.c
deleted file mode 100644
index d1e59cec116e..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_setup.c
+++ /dev/null
@@ -1,228 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * The generic setup file for PMC-Sierra MSP processors
- *
- * Copyright 2005-2007 PMC-Sierra, Inc,
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- */
-
-#include <linux/delay.h>
-
-#include <asm/bootinfo.h>
-#include <asm/cacheflush.h>
-#include <asm/idle.h>
-#include <asm/r4kcache.h>
-#include <asm/reboot.h>
-#include <asm/smp-ops.h>
-#include <asm/time.h>
-
-#include <msp_prom.h>
-#include <msp_regs.h>
-
-#if defined(CONFIG_PMC_MSP7120_GW)
-#include <msp_regops.h>
-#define MSP_BOARD_RESET_GPIO 9
-#endif
-
-extern void msp_serial_setup(void);
-
-#if defined(CONFIG_PMC_MSP7120_EVAL) || \
- defined(CONFIG_PMC_MSP7120_GW) || \
- defined(CONFIG_PMC_MSP7120_FPGA)
-/*
- * Performs the reset for MSP7120-based boards
- */
-void msp7120_reset(void)
-{
- void *start, *end, *iptr;
-
- /* Diasble all interrupts */
- local_irq_disable();
-#ifdef CONFIG_SYS_SUPPORTS_MULTITHREADING
- dvpe();
-#endif
-
- /* Cache the reset code of this function */
- __asm__ __volatile__ (
- " .set push \n"
- " .set arch=r4000 \n"
- " la %0,startpoint \n"
- " la %1,endpoint \n"
- " .set pop \n"
- : "=r" (start), "=r" (end)
- :
- );
-
- for (iptr = (void *)((unsigned int)start & ~(L1_CACHE_BYTES - 1));
- iptr < end; iptr += L1_CACHE_BYTES)
- cache_op(Fill, iptr);
-
- __asm__ __volatile__ (
- "startpoint: \n"
- );
-
- /* Put the DDRC into self-refresh mode */
- DDRC_INDIRECT_WRITE(DDRC_CTL(10), 0xb, 1 << 16);
-
- /*
- * IMPORTANT!
- * DO NOT do anything from here on out that might even
- * think about fetching from RAM - i.e., don't call any
- * non-inlined functions, and be VERY sure that any inline
- * functions you do call do NOT access any sort of RAM
- * anywhere!
- */
-
- /* Wait a bit for the DDRC to settle */
- mdelay(125);
-
-#if defined(CONFIG_PMC_MSP7120_GW)
- /*
- * Set GPIO 9 HI, (tied to board reset logic)
- * GPIO 9 is the 4th GPIO of register 3
- *
- * NOTE: We cannot use the higher-level msp_gpio_mode()/out()
- * as GPIO char driver may not be enabled and it would look up
- * data inRAM!
- */
- set_value_reg32(GPIO_CFG3_REG, 0xf000, 0x8000);
- set_reg32(GPIO_DATA3_REG, 8);
-
- /*
- * In case GPIO9 doesn't reset the board (jumper configurable!)
- * fallback to device reset below.
- */
-#endif
- /* Set bit 1 of the MSP7120 reset register */
- *RST_SET_REG = 0x00000001;
-
- __asm__ __volatile__ (
- "endpoint: \n"
- );
-}
-#endif
-
-void msp_restart(char *command)
-{
- printk(KERN_WARNING "Now rebooting .......\n");
-
-#if defined(CONFIG_PMC_MSP7120_EVAL) || \
- defined(CONFIG_PMC_MSP7120_GW) || \
- defined(CONFIG_PMC_MSP7120_FPGA)
- msp7120_reset();
-#else
- /* No chip-specific reset code, just jump to the ROM reset vector */
- set_c0_status(ST0_BEV | ST0_ERL);
- change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
- __flush_cache_all();
- write_c0_wired(0);
-
- __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-#endif
-}
-
-void msp_halt(void)
-{
- printk(KERN_WARNING "\n** You can safely turn off the power\n");
- while (1)
- /* If possible call official function to get CPU WARs */
- if (cpu_wait)
- (*cpu_wait)();
- else
- __asm__(".set\tmips3\n\t" "wait\n\t" ".set\tmips0");
-}
-
-void msp_power_off(void)
-{
- msp_halt();
-}
-
-void __init plat_mem_setup(void)
-{
- _machine_restart = msp_restart;
- _machine_halt = msp_halt;
- pm_power_off = msp_power_off;
-}
-
-void __init prom_init(void)
-{
- unsigned long family;
- unsigned long revision;
-
- prom_argc = fw_arg0;
- prom_argv = (char **)fw_arg1;
- prom_envp = (char **)fw_arg2;
-
- /*
- * Someday we can use this with PMON2000 to get a
- * platform call prom routines for output etc. without
- * having to use grody hacks. For now it's unused.
- *
- * struct callvectors *cv = (struct callvectors *) fw_arg3;
- */
- family = identify_family();
- revision = identify_revision();
-
- switch (family) {
- case FAMILY_FPGA:
- if (FPGA_IS_MSP4200(revision)) {
- /* Old-style revision ID */
- mips_machtype = MACH_MSP4200_FPGA;
- } else {
- mips_machtype = MACH_MSP_OTHER;
- }
- break;
-
- case FAMILY_MSP4200:
-#if defined(CONFIG_PMC_MSP4200_EVAL)
- mips_machtype = MACH_MSP4200_EVAL;
-#elif defined(CONFIG_PMC_MSP4200_GW)
- mips_machtype = MACH_MSP4200_GW;
-#else
- mips_machtype = MACH_MSP_OTHER;
-#endif
- break;
-
- case FAMILY_MSP4200_FPGA:
- mips_machtype = MACH_MSP4200_FPGA;
- break;
-
- case FAMILY_MSP7100:
-#if defined(CONFIG_PMC_MSP7120_EVAL)
- mips_machtype = MACH_MSP7120_EVAL;
-#elif defined(CONFIG_PMC_MSP7120_GW)
- mips_machtype = MACH_MSP7120_GW;
-#else
- mips_machtype = MACH_MSP_OTHER;
-#endif
- break;
-
- case FAMILY_MSP7100_FPGA:
- mips_machtype = MACH_MSP7120_FPGA;
- break;
-
- default:
- /* we don't recognize the machine */
- mips_machtype = MACH_UNKNOWN;
- panic("***Bogosity factor five***, exiting");
- break;
- }
-
- prom_init_cmdline();
-
- prom_meminit();
-
- /*
- * Sub-system setup follows.
- * Setup functions can either be called here or using the
- * subsys_initcall mechanism (i.e. see msp_pci_setup). The
- * order in which they are called can be changed by using the
- * link order in arch/mips/pmc-sierra/msp71xx/Makefile.
- *
- * NOTE: Please keep sub-system specific initialization code
- * in separate specific files.
- */
- msp_serial_setup();
-
- register_vsmp_smp_ops();
-}
diff --git a/arch/mips/pmcs-msp71xx/msp_smp.c b/arch/mips/pmcs-msp71xx/msp_smp.c
deleted file mode 100644
index 00092e2924ec..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_smp.c
+++ /dev/null
@@ -1,56 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc.
- * Copyright (C) 2001 Ralf Baechle
- * Copyright (C) 2010 PMC-Sierra, Inc.
- *
- * VSMP support for MSP platforms . Derived from malta vsmp support.
- */
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-
-#include <asm/setup.h>
-
-#ifdef CONFIG_MIPS_MT_SMP
-#define MIPS_CPU_IPI_RESCHED_IRQ 0 /* SW int 0 for resched */
-#define MIPS_CPU_IPI_CALL_IRQ 1 /* SW int 1 for call */
-
-
-static void ipi_resched_dispatch(void)
-{
- do_IRQ(MIPS_CPU_IPI_RESCHED_IRQ);
-}
-
-static void ipi_call_dispatch(void)
-{
- do_IRQ(MIPS_CPU_IPI_CALL_IRQ);
-}
-
-static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
-{
- return IRQ_HANDLED;
-}
-
-static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
-{
- generic_smp_call_function_interrupt();
-
- return IRQ_HANDLED;
-}
-
-void __init arch_init_ipiirq(int irq, const char *name, irq_handler_t handler)
-{
- if (request_irq(irq, handler, IRQF_PERCPU, name, NULL))
- pr_err("Failed to request irq %d (%s)\n", irq, name);
- irq_set_handler(irq, handle_percpu_irq);
-}
-
-void __init msp_vsmp_int_init(void)
-{
- set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
- set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
- arch_init_ipiirq(MIPS_CPU_IPI_RESCHED_IRQ, "IPI_resched",
- ipi_resched_interrupt);
- arch_init_ipiirq(MIPS_CPU_IPI_CALL_IRQ, "IPI_call", ipi_call_interrupt);
-}
-#endif /* CONFIG_MIPS_MT_SMP */
diff --git a/arch/mips/pmcs-msp71xx/msp_time.c b/arch/mips/pmcs-msp71xx/msp_time.c
deleted file mode 100644
index 9c629829f447..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_time.c
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Setting up the clock on MSP SOCs. No RTC typically.
- *
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
- *
- * ########################################################################
- *
- * ########################################################################
- */
-
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/ptrace.h>
-
-#include <asm/cevt-r4k.h>
-#include <asm/mipsregs.h>
-#include <asm/time.h>
-
-#include <msp_prom.h>
-#include <msp_int.h>
-#include <msp_regs.h>
-
-#define get_current_vpe() \
- ((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE)
-
-static int tim_installed;
-
-void __init plat_time_init(void)
-{
- char *endp, *s;
- unsigned long cpu_rate = 0;
-
- if (cpu_rate == 0) {
- s = prom_getenv("clkfreqhz");
- cpu_rate = simple_strtoul(s, &endp, 10);
- if (endp != NULL && *endp != 0) {
- printk(KERN_ERR
- "Clock rate in Hz parse error: %s\n", s);
- cpu_rate = 0;
- }
- }
-
- if (cpu_rate == 0) {
- s = prom_getenv("clkfreq");
- cpu_rate = 1000 * simple_strtoul(s, &endp, 10);
- if (endp != NULL && *endp != 0) {
- printk(KERN_ERR
- "Clock rate in MHz parse error: %s\n", s);
- cpu_rate = 0;
- }
- }
-
- if (cpu_rate == 0) {
-#if defined(CONFIG_PMC_MSP7120_EVAL) \
- || defined(CONFIG_PMC_MSP7120_GW)
- cpu_rate = 400000000;
-#elif defined(CONFIG_PMC_MSP7120_FPGA)
- cpu_rate = 25000000;
-#else
- cpu_rate = 150000000;
-#endif
- printk(KERN_ERR
- "Failed to determine CPU clock rate, "
- "assuming %ld hz ...\n", cpu_rate);
- }
-
- printk(KERN_WARNING "Clock rate set to %ld\n", cpu_rate);
-
- /* timer frequency is 1/2 clock rate */
- mips_hpt_frequency = cpu_rate/2;
-}
-
-unsigned int get_c0_compare_int(void)
-{
- unsigned long flags = IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED;
-
- /* MIPS_MT modes may want timer for second VPE */
- if ((get_current_vpe()) && !tim_installed) {
- if (request_irq(MSP_INT_VPE1_TIMER, c0_compare_interrupt, flags,
- "timer", c0_compare_interrupt))
- pr_err("Failed to register timer interrupt\n");
- tim_installed++;
- }
-
- return get_current_vpe() ? MSP_INT_VPE1_TIMER : MSP_INT_VPE0_TIMER;
-}
diff --git a/arch/mips/pmcs-msp71xx/msp_usb.c b/arch/mips/pmcs-msp71xx/msp_usb.c
deleted file mode 100644
index d38ac70b5a2e..000000000000
--- a/arch/mips/pmcs-msp71xx/msp_usb.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * The setup file for USB related hardware on PMC-Sierra MSP processors.
- *
- * Copyright 2006 PMC-Sierra, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_GADGET)
-
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-
-#include <asm/mipsregs.h>
-
-#include <msp_regs.h>
-#include <msp_int.h>
-#include <msp_prom.h>
-#include <msp_usb.h>
-
-
-#if defined(CONFIG_USB_EHCI_HCD)
-static struct resource msp_usbhost0_resources[] = {
- [0] = { /* EHCI-HS operational and capabilities registers */
- .start = MSP_USB0_HS_START,
- .end = MSP_USB0_HS_END,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = MSP_INT_USB,
- .end = MSP_INT_USB,
- .flags = IORESOURCE_IRQ,
- },
- [2] = { /* MSBus-to-AMBA bridge register space */
- .start = MSP_USB0_MAB_START,
- .end = MSP_USB0_MAB_END,
- .flags = IORESOURCE_MEM,
- },
- [3] = { /* Identification and general hardware parameters */
- .start = MSP_USB0_ID_START,
- .end = MSP_USB0_ID_END,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static u64 msp_usbhost0_dma_mask = 0xffffffffUL;
-
-static struct mspusb_device msp_usbhost0_device = {
- .dev = {
- .name = "pmcmsp-ehci",
- .id = 0,
- .dev = {
- .dma_mask = &msp_usbhost0_dma_mask,
- .coherent_dma_mask = 0xffffffffUL,
- },
- .num_resources = ARRAY_SIZE(msp_usbhost0_resources),
- .resource = msp_usbhost0_resources,
- },
-};
-#endif /* CONFIG_USB_EHCI_HCD */
-
-#if defined(CONFIG_USB_GADGET)
-static struct resource msp_usbdev0_resources[] = {
- [0] = { /* EHCI-HS operational and capabilities registers */
- .start = MSP_USB0_HS_START,
- .end = MSP_USB0_HS_END,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = MSP_INT_USB,
- .end = MSP_INT_USB,
- .flags = IORESOURCE_IRQ,
- },
- [2] = { /* MSBus-to-AMBA bridge register space */
- .start = MSP_USB0_MAB_START,
- .end = MSP_USB0_MAB_END,
- .flags = IORESOURCE_MEM,
- },
- [3] = { /* Identification and general hardware parameters */
- .start = MSP_USB0_ID_START,
- .end = MSP_USB0_ID_END,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static u64 msp_usbdev_dma_mask = 0xffffffffUL;
-
-/* This may need to be converted to a mspusb_device, too. */
-static struct mspusb_device msp_usbdev0_device = {
- .dev = {
- .name = "msp71xx_udc",
- .id = 0,
- .dev = {
- .dma_mask = &msp_usbdev_dma_mask,
- .coherent_dma_mask = 0xffffffffUL,
- },
- .num_resources = ARRAY_SIZE(msp_usbdev0_resources),
- .resource = msp_usbdev0_resources,
- },
-};
-#endif /* CONFIG_USB_GADGET */
-
-static int __init msp_usb_setup(void)
-{
- char *strp;
- char envstr[32];
- struct platform_device *msp_devs[NUM_USB_DEVS];
- unsigned int val;
-
- /* construct environment name usbmode */
- /* set usbmode <host/device> as pmon environment var */
- /*
- * Could this perhaps be integrated into the "features" env var?
- * Use the features key "U", and follow with "H" for host-mode,
- * "D" for device-mode. If it works for Ethernet, why not USB...
- * -- hammtrev, 2007/03/22
- */
- snprintf(&envstr[0], sizeof(envstr), "usbmode");
-
- /* set default host mode */
- val = 1;
-
- /* get environment string */
- strp = prom_getenv(&envstr[0]);
- if (strp) {
- /* compare string */
- if (!strcmp(strp, "device"))
- val = 0;
- }
-
- if (val) {
-#if defined(CONFIG_USB_EHCI_HCD)
- msp_devs[0] = &msp_usbhost0_device.dev;
- ppfinit("platform add USB HOST done %s.\n", msp_devs[0]->name);
-#else
- ppfinit("%s: echi_hcd not supported\n", __FILE__);
-#endif /* CONFIG_USB_EHCI_HCD */
- } else {
-#if defined(CONFIG_USB_GADGET)
- /* get device mode structure */
- msp_devs[0] = &msp_usbdev0_device.dev;
- ppfinit("platform add USB DEVICE done %s.\n"
- , msp_devs[0]->name);
-#else
- ppfinit("%s: usb_gadget not supported\n", __FILE__);
-#endif /* CONFIG_USB_GADGET */
- }
- /* add device */
- platform_add_devices(msp_devs, ARRAY_SIZE(msp_devs));
-
- return 0;
-}
-
-subsys_initcall(msp_usb_setup);
-#endif /* CONFIG_USB_EHCI_HCD || CONFIG_USB_GADGET */
diff --git a/arch/mips/pnx833x/Platform b/arch/mips/pnx833x/Platform
index 287260669551..e5286a49fc3e 100644
--- a/arch/mips/pnx833x/Platform
+++ b/arch/mips/pnx833x/Platform
@@ -1,5 +1,4 @@
# NXP STB225
-platform-$(CONFIG_SOC_PNX833X) += pnx833x/
cflags-$(CONFIG_SOC_PNX833X) += -I$(srctree)/arch/mips/include/asm/mach-pnx833x
load-$(CONFIG_NXP_STB220) += 0xffffffff80001000
load-$(CONFIG_NXP_STB225) += 0xffffffff80001000
diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
index 6095fcc334f4..02ee0791481d 100644
--- a/arch/mips/ralink/Platform
+++ b/arch/mips/ralink/Platform
@@ -1,7 +1,6 @@
#
# Ralink SoC common stuff
#
-core-$(CONFIG_RALINK) += arch/mips/ralink/
cflags-$(CONFIG_RALINK) += -I$(srctree)/arch/mips/include/asm/mach-ralink
#
diff --git a/arch/mips/ralink/bootrom.c b/arch/mips/ralink/bootrom.c
index 88bcce59beeb..94ca8379b83c 100644
--- a/arch/mips/ralink/bootrom.c
+++ b/arch/mips/ralink/bootrom.c
@@ -31,7 +31,7 @@ static const struct file_operations bootrom_file_ops = {
.release = single_release,
};
-static int bootrom_setup(void)
+static int __init bootrom_setup(void)
{
debugfs_create_file("bootrom", 0444, NULL, NULL, &bootrom_file_ops);
return 0;
diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c
index 0accb80db709..ca0ac607b0f3 100644
--- a/arch/mips/ralink/mt7621.c
+++ b/arch/mips/ralink/mt7621.c
@@ -20,11 +20,6 @@
#include "common.h"
-#define SYSC_REG_SYSCFG 0x10
-#define SYSC_REG_CPLL_CLKCFG0 0x2c
-#define SYSC_REG_CUR_CLK_STS 0x44
-#define CPU_CLK_SEL (BIT(30) | BIT(31))
-
#define MT7621_GPIO_MODE_UART1 1
#define MT7621_GPIO_MODE_I2C 2
#define MT7621_GPIO_MODE_UART3_MASK 0x3
@@ -115,44 +110,6 @@ phys_addr_t mips_cpc_default_phys_base(void)
panic("Cannot detect cpc address");
}
-void __init ralink_clk_init(void)
-{
- int cpu_fdiv = 0;
- int cpu_ffrac = 0;
- int fbdiv = 0;
- u32 clk_sts, syscfg;
- u8 clk_sel = 0, xtal_mode;
- u32 cpu_clk;
-
- if ((rt_sysc_r32(SYSC_REG_CPLL_CLKCFG0) & CPU_CLK_SEL) != 0)
- clk_sel = 1;
-
- switch (clk_sel) {
- case 0:
- clk_sts = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
- cpu_fdiv = ((clk_sts >> 8) & 0x1F);
- cpu_ffrac = (clk_sts & 0x1F);
- cpu_clk = (500 * cpu_ffrac / cpu_fdiv) * 1000 * 1000;
- break;
-
- case 1:
- fbdiv = ((rt_sysc_r32(0x648) >> 4) & 0x7F) + 1;
- syscfg = rt_sysc_r32(SYSC_REG_SYSCFG);
- xtal_mode = (syscfg >> 6) & 0x7;
- if (xtal_mode >= 6) {
- /* 25Mhz Xtal */
- cpu_clk = 25 * fbdiv * 1000 * 1000;
- } else if (xtal_mode >= 3) {
- /* 40Mhz Xtal */
- cpu_clk = 40 * fbdiv * 1000 * 1000;
- } else {
- /* 20Mhz Xtal */
- cpu_clk = 20 * fbdiv * 1000 * 1000;
- }
- break;
- }
-}
-
void __init ralink_of_remap(void)
{
rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc");
diff --git a/arch/mips/rb532/Platform b/arch/mips/rb532/Platform
index aeec45a7cbb3..12eaa8790b3e 100644
--- a/arch/mips/rb532/Platform
+++ b/arch/mips/rb532/Platform
@@ -1,7 +1,6 @@
#
# Routerboard 532
#
-platform-$(CONFIG_MIKROTIK_RB532) += rb532/
cflags-$(CONFIG_MIKROTIK_RB532) += \
-I$(srctree)/arch/mips/include/asm/mach-rc32434
load-$(CONFIG_MIKROTIK_RB532) += 0xffffffff80101000
diff --git a/arch/mips/sgi-ip22/Platform b/arch/mips/sgi-ip22/Platform
index e8f6b3a42a48..62fa30bb959e 100644
--- a/arch/mips/sgi-ip22/Platform
+++ b/arch/mips/sgi-ip22/Platform
@@ -7,7 +7,6 @@
# current variable will break so for 64-bit kernels we have to raise the start
# address by 8kb.
#
-platform-$(CONFIG_SGI_IP22) += sgi-ip22/
cflags-$(CONFIG_SGI_IP22) += -I$(srctree)/arch/mips/include/asm/mach-ip22
ifdef CONFIG_32BIT
load-$(CONFIG_SGI_IP22) += 0xffffffff88002000
@@ -29,6 +28,5 @@ ifdef CONFIG_SGI_IP28
$(error gcc doesn't support needed option -mr10k-cache-barrier=store)
endif
endif
-platform-$(CONFIG_SGI_IP28) += sgi-ip22/
cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=store -I$(srctree)/arch/mips/include/asm/mach-ip28
load-$(CONFIG_SGI_IP28) += 0xa800000020004000
diff --git a/arch/mips/sgi-ip27/Platform b/arch/mips/sgi-ip27/Platform
index 1fb9c2ea7c8f..e734ee6abd44 100644
--- a/arch/mips/sgi-ip27/Platform
+++ b/arch/mips/sgi-ip27/Platform
@@ -5,8 +5,6 @@
# symmon, 0xc00000000001c000 for production kernels. Note that the value must
# be 16kb aligned or the handling of the current variable will break.
#
-ifdef CONFIG_SGI_IP27
-platform-$(CONFIG_SGI_IP27) += sgi-ip27/
cflags-$(CONFIG_SGI_IP27) += -I$(srctree)/arch/mips/include/asm/mach-ip27
ifdef CONFIG_MAPPED_KERNEL
load-$(CONFIG_SGI_IP27) += 0xc00000004001c000
@@ -16,4 +14,3 @@ else
load-$(CONFIG_SGI_IP27) += 0xa80000000001c000
OBJCOPYFLAGS := --change-addresses=0x57ffffff80000000
endif
-endif
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index 61f3565f3645..c0e33632bc37 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -21,7 +21,6 @@
#include <asm/time.h>
#include <asm/pgtable.h>
#include <asm/sgialib.h>
-#include <asm/sn/ioc3.h>
#include <asm/sn/klconfig.h>
#include <asm/sn/arch.h>
#include <asm/sn/addrs.h>
@@ -29,14 +28,6 @@
#include "ip27-common.h"
-#define TICK_SIZE (tick_nsec / 1000)
-
-/* Includes for ioc3_init(). */
-#include <asm/sn/types.h>
-#include <asm/pci/bridge.h>
-
-#include "ip27-common.h"
-
static int rt_next_event(unsigned long delta, struct clock_event_device *evt)
{
unsigned int cpu = smp_processor_id();
diff --git a/arch/mips/sgi-ip30/Platform b/arch/mips/sgi-ip30/Platform
index 2b5695c2049a..f6f11517e091 100644
--- a/arch/mips/sgi-ip30/Platform
+++ b/arch/mips/sgi-ip30/Platform
@@ -1,8 +1,5 @@
#
# SGI-IP30 (Octane/Octane2)
#
-ifdef CONFIG_SGI_IP30
-platform-$(CONFIG_SGI_IP30) += sgi-ip30/
cflags-$(CONFIG_SGI_IP30) += -I$(srctree)/arch/mips/include/asm/mach-ip30
load-$(CONFIG_SGI_IP30) += 0xa800000020004000
-endif
diff --git a/arch/mips/sgi-ip32/Platform b/arch/mips/sgi-ip32/Platform
index 0fea556f3641..f58a7a02b4ca 100644
--- a/arch/mips/sgi-ip32/Platform
+++ b/arch/mips/sgi-ip32/Platform
@@ -6,6 +6,5 @@
# a multiple of the kernel stack size or the handling of the current variable
# will break.
#
-platform-$(CONFIG_SGI_IP32) += sgi-ip32/
cflags-$(CONFIG_SGI_IP32) += -I$(srctree)/arch/mips/include/asm/mach-ip32
load-$(CONFIG_SGI_IP32) += 0xffffffff80004000
diff --git a/arch/mips/sibyte/Platform b/arch/mips/sibyte/Platform
index af117330ce14..65b2225b76b2 100644
--- a/arch/mips/sibyte/Platform
+++ b/arch/mips/sibyte/Platform
@@ -1,10 +1,6 @@
#
# These are all rather similar so we consider them a single platform
#
-platform-$(CONFIG_SIBYTE_BCM112X) += sibyte/
-platform-$(CONFIG_SIBYTE_SB1250) += sibyte/
-platform-$(CONFIG_SIBYTE_BCM1x55) += sibyte/
-platform-$(CONFIG_SIBYTE_BCM1x80) += sibyte/
#
# Sibyte SB1250 / BCM1480 family of SOCs
diff --git a/arch/mips/sni/Platform b/arch/mips/sni/Platform
index 2644a9d63c0f..b0b3dde0bef8 100644
--- a/arch/mips/sni/Platform
+++ b/arch/mips/sni/Platform
@@ -1,7 +1,6 @@
#
# SNI RM
#
-platform-$(CONFIG_SNI_RM) += sni/
cflags-$(CONFIG_SNI_RM) += -I$(srctree)/arch/mips/include/asm/mach-rm
ifdef CONFIG_CPU_LITTLE_ENDIAN
load-$(CONFIG_SNI_RM) += 0xffffffff80600000
diff --git a/arch/mips/tools/elf-entry.c b/arch/mips/tools/elf-entry.c
index adde79ce7fc0..dbd14ff05b4c 100644
--- a/arch/mips/tools/elf-entry.c
+++ b/arch/mips/tools/elf-entry.c
@@ -51,11 +51,14 @@ int main(int argc, const char *argv[])
nread = fread(&hdr, 1, sizeof(hdr), file);
if (nread != sizeof(hdr)) {
perror("Unable to read input file");
+ fclose(file);
return EXIT_FAILURE;
}
- if (memcmp(hdr.ehdr32.e_ident, ELFMAG, SELFMAG))
+ if (memcmp(hdr.ehdr32.e_ident, ELFMAG, SELFMAG)) {
+ fclose(file);
die("Input is not an ELF\n");
+ }
switch (hdr.ehdr32.e_ident[EI_CLASS]) {
case ELFCLASS32:
@@ -67,6 +70,7 @@ int main(int argc, const char *argv[])
entry = be32toh(hdr.ehdr32.e_entry);
break;
default:
+ fclose(file);
die("Invalid ELF encoding\n");
}
@@ -83,14 +87,17 @@ int main(int argc, const char *argv[])
entry = be64toh(hdr.ehdr64.e_entry);
break;
default:
+ fclose(file);
die("Invalid ELF encoding\n");
}
break;
default:
+ fclose(file);
die("Invalid ELF class\n");
}
printf("0x%016" PRIx64 "\n", entry);
+ fclose(file);
return EXIT_SUCCESS;
}
diff --git a/arch/mips/tools/loongson3-llsc-check.c b/arch/mips/tools/loongson3-llsc-check.c
index 0ebddd0ae46f..bdbc7b4324ec 100644
--- a/arch/mips/tools/loongson3-llsc-check.c
+++ b/arch/mips/tools/loongson3-llsc-check.c
@@ -303,5 +303,7 @@ out_munmap:
out_close:
close(vmlinux_fd);
out_ret:
+ fprintf(stdout, "loongson3-llsc-check returns %s\n",
+ status ? "failure" : "success");
return status;
}
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index 9a22a182b7a4..85c4c121c71f 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -58,7 +58,7 @@ config TOSHIBA_RBTX4939
config SOC_TX3927
bool
select CEVT_TXX9
- select HAS_TXX9_SERIAL
+ imply HAS_TXX9_SERIAL
select HAVE_PCI
select IRQ_TXX9
select GPIO_TXX9
@@ -66,30 +66,30 @@ config SOC_TX3927
config SOC_TX4927
bool
select CEVT_TXX9
- select HAS_TXX9_SERIAL
+ imply HAS_TXX9_SERIAL
select HAVE_PCI
select IRQ_TXX9
select PCI_TX4927
select GPIO_TXX9
- select HAS_TXX9_ACLC
+ imply HAS_TXX9_ACLC
config SOC_TX4938
bool
select CEVT_TXX9
- select HAS_TXX9_SERIAL
+ imply HAS_TXX9_SERIAL
select HAVE_PCI
select IRQ_TXX9
select PCI_TX4927
select GPIO_TXX9
- select HAS_TXX9_ACLC
+ imply HAS_TXX9_ACLC
config SOC_TX4939
bool
select CEVT_TXX9
- select HAS_TXX9_SERIAL
+ imply HAS_TXX9_SERIAL
select HAVE_PCI
select PCI_TX4927
- select HAS_TXX9_ACLC
+ imply HAS_TXX9_ACLC
config TXX9_7SEGLED
bool
diff --git a/arch/mips/txx9/Platform b/arch/mips/txx9/Platform
index a176d1fd5799..7f4429ba22eb 100644
--- a/arch/mips/txx9/Platform
+++ b/arch/mips/txx9/Platform
@@ -1,6 +1,3 @@
-platform-$(CONFIG_MACH_TX39XX) += txx9/
-platform-$(CONFIG_MACH_TX49XX) += txx9/
-
cflags-$(CONFIG_MACH_TX39XX) += \
-I$(srctree)/arch/mips/include/asm/mach-tx39xx
cflags-$(CONFIG_MACH_TX49XX) += \
diff --git a/arch/mips/vdso/Kconfig b/arch/mips/vdso/Kconfig
new file mode 100644
index 000000000000..7aec721398d5
--- /dev/null
+++ b/arch/mips/vdso/Kconfig
@@ -0,0 +1,18 @@
+# For the pre-R6 code in arch/mips/vdso/vdso.h for locating
+# the base address of VDSO, the linker will emit a R_MIPS_PC32
+# relocation in binutils > 2.25 but it will fail with older versions
+# because that relocation is not supported for that symbol. As a result
+# of which we are forced to disable the VDSO symbols when building
+# with < 2.25 binutils on pre-R6 kernels. For more references on why we
+# can't use other methods to get the base address of VDSO please refer to
+# the comments on that file.
+#
+# GCC (at least up to version 9.2) appears to emit function calls that make use
+# of the GOT when targeting microMIPS, which we can't use in the VDSO due to
+# the lack of relocations. As such, we disable the VDSO for microMIPS builds.
+
+config MIPS_LD_CAN_LINK_VDSO
+ def_bool LD_VERSION >= 225000000 || LD_IS_LLD
+
+config MIPS_DISABLE_VDSO
+ def_bool CPU_MICROMIPS || (!CPU_MIPSR6 && !MIPS_LD_CAN_LINK_VDSO)
diff --git a/arch/mips/vdso/Makefile b/arch/mips/vdso/Makefile
index d7fe8408603e..2e64c7600eea 100644
--- a/arch/mips/vdso/Makefile
+++ b/arch/mips/vdso/Makefile
@@ -52,44 +52,17 @@ endif
CFLAGS_REMOVE_vgettimeofday.o = -pg
-DISABLE_VDSO := n
-
-#
-# For the pre-R6 code in arch/mips/vdso/vdso.h for locating
-# the base address of VDSO, the linker will emit a R_MIPS_PC32
-# relocation in binutils > 2.25 but it will fail with older versions
-# because that relocation is not supported for that symbol. As a result
-# of which we are forced to disable the VDSO symbols when building
-# with < 2.25 binutils on pre-R6 kernels. For more references on why we
-# can't use other methods to get the base address of VDSO please refer to
-# the comments on that file.
-#
-ifndef CONFIG_CPU_MIPSR6
- ifeq ($(call ld-ifversion, -lt, 225000000, y),y)
+ifdef CONFIG_MIPS_DISABLE_VDSO
+ ifndef CONFIG_MIPS_LD_CAN_LINK_VDSO
$(warning MIPS VDSO requires binutils >= 2.25)
- DISABLE_VDSO := y
endif
-endif
-
-#
-# GCC (at least up to version 9.2) appears to emit function calls that make use
-# of the GOT when targeting microMIPS, which we can't use in the VDSO due to
-# the lack of relocations. As such, we disable the VDSO for microMIPS builds.
-#
-ifdef CONFIG_CPU_MICROMIPS
- DISABLE_VDSO := y
-endif
-
-ifeq ($(DISABLE_VDSO),y)
obj-vdso-y := $(filter-out vgettimeofday.o, $(obj-vdso-y))
- ccflags-vdso += -DDISABLE_MIPS_VDSO
endif
# VDSO linker flags.
-VDSO_LDFLAGS := \
- -Wl,-Bsymbolic -Wl,--no-undefined -Wl,-soname=linux-vdso.so.1 \
- $(addprefix -Wl$(comma),$(filter -E%,$(KBUILD_CFLAGS))) \
- -nostdlib -shared -Wl,--hash-style=sysv -Wl,--build-id
+ldflags-y := -Bsymbolic --no-undefined -soname=linux-vdso.so.1 \
+ $(filter -E%,$(KBUILD_CFLAGS)) -nostdlib -shared \
+ -G 0 --eh-frame-hdr --hash-style=sysv --build-id -T
CFLAGS_REMOVE_vdso.o = -pg
@@ -108,11 +81,7 @@ quiet_cmd_vdso_mips_check = VDSOCHK $@
#
quiet_cmd_vdsold_and_vdso_check = LD $@
- cmd_vdsold_and_vdso_check = $(cmd_vdsold); $(cmd_vdso_check); $(cmd_vdso_mips_check)
-
-quiet_cmd_vdsold = VDSO $@
- cmd_vdsold = $(CC) $(c_flags) $(VDSO_LDFLAGS) \
- -Wl,-T $(filter %.lds,$^) $(filter %.o,$^) -o $@
+ cmd_vdsold_and_vdso_check = $(cmd_ld); $(cmd_vdso_check); $(cmd_vdso_mips_check)
quiet_cmd_vdsoas_o_S = AS $@
cmd_vdsoas_o_S = $(CC) $(a_flags) -c -o $@ $<
diff --git a/arch/mips/vdso/vdso.lds.S b/arch/mips/vdso/vdso.lds.S
index da4627430aba..d90b65724d78 100644
--- a/arch/mips/vdso/vdso.lds.S
+++ b/arch/mips/vdso/vdso.lds.S
@@ -91,7 +91,7 @@ PHDRS
VERSION
{
LINUX_2.6 {
-#ifndef DISABLE_MIPS_VDSO
+#ifndef CONFIG_MIPS_DISABLE_VDSO
global:
__vdso_clock_gettime;
__vdso_gettimeofday;
diff --git a/arch/mips/vr41xx/Makefile b/arch/mips/vr41xx/Makefile
new file mode 100644
index 000000000000..765020d5ee4d
--- /dev/null
+++ b/arch/mips/vr41xx/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+obj-$(CONFIG_MACH_VR41XX) += common/
+obj-$(CONFIG_CASIO_E55) += casio-e55/
+obj-$(CONFIG_IBM_WORKPAD) += ibm-workpad/
diff --git a/arch/mips/vr41xx/Platform b/arch/mips/vr41xx/Platform
index b6c8d5c08ddb..3f593a3e5678 100644
--- a/arch/mips/vr41xx/Platform
+++ b/arch/mips/vr41xx/Platform
@@ -1,19 +1,16 @@
#
# NEC VR4100 series based machines
#
-platform-$(CONFIG_MACH_VR41XX) += vr41xx/common/
cflags-$(CONFIG_MACH_VR41XX) += -I$(srctree)/arch/mips/include/asm/mach-vr41xx
#
# CASIO CASSIPEIA E-55/65 (VR4111)
#
-platform-$(CONFIG_CASIO_E55) += vr41xx/casio-e55/
load-$(CONFIG_CASIO_E55) += 0xffffffff80004000
#
# IBM WorkPad z50 (VR4121)
#
-platform-$(CONFIG_IBM_WORKPAD) += vr41xx/ibm-workpad/
load-$(CONFIG_IBM_WORKPAD) += 0xffffffff80004000
#
diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c
index 909f40fbcde2..d05e761d9572 100644
--- a/drivers/cpufreq/loongson2_cpufreq.c
+++ b/drivers/cpufreq/loongson2_cpufreq.c
@@ -20,7 +20,6 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
-#include <asm/clock.h>
#include <asm/idle.h>
#include <asm/mach-loongson2ef/loongson.h>
@@ -58,29 +57,20 @@ static int loongson2_cpufreq_target(struct cpufreq_policy *policy,
loongson2_clockmod_table[index].driver_data) / 8;
/* setting the cpu frequency */
- clk_set_rate(policy->clk, freq * 1000);
+ loongson2_cpu_set_rate(freq);
return 0;
}
static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
- struct clk *cpuclk;
int i;
unsigned long rate;
int ret;
- cpuclk = clk_get(NULL, "cpu_clk");
- if (IS_ERR(cpuclk)) {
- pr_err("couldn't get CPU clk\n");
- return PTR_ERR(cpuclk);
- }
-
rate = cpu_clock_freq / 1000;
- if (!rate) {
- clk_put(cpuclk);
+ if (!rate)
return -EINVAL;
- }
/* clock table init */
for (i = 2;
@@ -88,20 +78,16 @@ static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy)
i++)
loongson2_clockmod_table[i].frequency = (rate * i) / 8;
- ret = clk_set_rate(cpuclk, rate * 1000);
- if (ret) {
- clk_put(cpuclk);
+ ret = loongson2_cpu_set_rate(rate);
+ if (ret)
return ret;
- }
- policy->clk = cpuclk;
cpufreq_generic_init(policy, &loongson2_clockmod_table[0], 0);
return 0;
}
static int loongson2_cpufreq_exit(struct cpufreq_policy *policy)
{
- clk_put(policy->clk);
return 0;
}
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 91bfdb784829..ae36edb1d7db 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -258,6 +258,16 @@ config PCI_HYPERV_INTERFACE
The Hyper-V PCI Interface is a helper driver allows other drivers to
have a common interface with the Hyper-V PCI frontend driver.
+config PCI_LOONGSON
+ bool "LOONGSON PCI Controller"
+ depends on MACH_LOONGSON64 || COMPILE_TEST
+ depends on OF
+ depends on PCI_QUIRKS
+ default MACH_LOONGSON64
+ help
+ Say Y here if you want to enable PCI controller support on
+ Loongson systems.
+
source "drivers/pci/controller/dwc/Kconfig"
source "drivers/pci/controller/mobiveil/Kconfig"
source "drivers/pci/controller/cadence/Kconfig"
diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
index 158c59771824..fbac4b0190a0 100644
--- a/drivers/pci/controller/Makefile
+++ b/drivers/pci/controller/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
obj-$(CONFIG_VMD) += vmd.o
obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
+obj-$(CONFIG_PCI_LOONGSON) += pci-loongson.o
# pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
obj-y += dwc/
obj-y += mobiveil/
diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c
new file mode 100644
index 000000000000..459009c8a4a0
--- /dev/null
+++ b/drivers/pci/controller/pci-loongson.c
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Loongson PCI Host Controller Driver
+ *
+ * Copyright (C) 2020 Jiaxun Yang <jiaxun.yang@flygoat.com>
+ */
+
+#include <linux/of_device.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+#include "../pci.h"
+
+/* Device IDs */
+#define DEV_PCIE_PORT_0 0x7a09
+#define DEV_PCIE_PORT_1 0x7a19
+#define DEV_PCIE_PORT_2 0x7a29
+
+#define DEV_LS2K_APB 0x7a02
+#define DEV_LS7A_CONF 0x7a10
+#define DEV_LS7A_LPC 0x7a0c
+
+#define FLAG_CFG0 BIT(0)
+#define FLAG_CFG1 BIT(1)
+#define FLAG_DEV_FIX BIT(2)
+
+struct loongson_pci {
+ void __iomem *cfg0_base;
+ void __iomem *cfg1_base;
+ struct platform_device *pdev;
+ u32 flags;
+};
+
+/* Fixup wrong class code in PCIe bridges */
+static void bridge_class_quirk(struct pci_dev *dev)
+{
+ dev->class = PCI_CLASS_BRIDGE_PCI << 8;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON,
+ DEV_PCIE_PORT_0, bridge_class_quirk);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON,
+ DEV_PCIE_PORT_1, bridge_class_quirk);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON,
+ DEV_PCIE_PORT_2, bridge_class_quirk);
+
+static void system_bus_quirk(struct pci_dev *pdev)
+{
+ /*
+ * The address space consumed by these devices is outside the
+ * resources of the host bridge.
+ */
+ pdev->mmio_always_on = 1;
+ pdev->non_compliant_bars = 1;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
+ DEV_LS2K_APB, system_bus_quirk);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
+ DEV_LS7A_CONF, system_bus_quirk);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
+ DEV_LS7A_LPC, system_bus_quirk);
+
+static void loongson_mrrs_quirk(struct pci_dev *dev)
+{
+ struct pci_bus *bus = dev->bus;
+ struct pci_dev *bridge;
+ static const struct pci_device_id bridge_devids[] = {
+ { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_0) },
+ { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_1) },
+ { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_2) },
+ { 0, },
+ };
+
+ /* look for the matching bridge */
+ while (!pci_is_root_bus(bus)) {
+ bridge = bus->self;
+ bus = bus->parent;
+ /*
+ * Some Loongson PCIe ports have a h/w limitation of
+ * 256 bytes maximum read request size. They can't handle
+ * anything larger than this. So force this limit on
+ * any devices attached under these ports.
+ */
+ if (pci_match_id(bridge_devids, bridge)) {
+ if (pcie_get_readrq(dev) > 256) {
+ pci_info(dev, "limiting MRRS to 256\n");
+ pcie_set_readrq(dev, 256);
+ }
+ break;
+ }
+ }
+}
+DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_mrrs_quirk);
+
+static void __iomem *cfg1_map(struct loongson_pci *priv, int bus,
+ unsigned int devfn, int where)
+{
+ unsigned long addroff = 0x0;
+
+ if (bus != 0)
+ addroff |= BIT(28); /* Type 1 Access */
+ addroff |= (where & 0xff) | ((where & 0xf00) << 16);
+ addroff |= (bus << 16) | (devfn << 8);
+ return priv->cfg1_base + addroff;
+}
+
+static void __iomem *cfg0_map(struct loongson_pci *priv, int bus,
+ unsigned int devfn, int where)
+{
+ unsigned long addroff = 0x0;
+
+ if (bus != 0)
+ addroff |= BIT(24); /* Type 1 Access */
+ addroff |= (bus << 16) | (devfn << 8) | where;
+ return priv->cfg0_base + addroff;
+}
+
+static void __iomem *pci_loongson_map_bus(struct pci_bus *bus, unsigned int devfn,
+ int where)
+{
+ unsigned char busnum = bus->number;
+ struct pci_host_bridge *bridge = pci_find_host_bridge(bus);
+ struct loongson_pci *priv = pci_host_bridge_priv(bridge);
+
+ /*
+ * Do not read more than one device on the bus other than
+ * the host bus. For our hardware the root bus is always bus 0.
+ */
+ if (priv->flags & FLAG_DEV_FIX && busnum != 0 &&
+ PCI_SLOT(devfn) > 0)
+ return NULL;
+
+ /* CFG0 can only access standard space */
+ if (where < PCI_CFG_SPACE_SIZE && priv->cfg0_base)
+ return cfg0_map(priv, busnum, devfn, where);
+
+ /* CFG1 can access extended space */
+ if (where < PCI_CFG_SPACE_EXP_SIZE && priv->cfg1_base)
+ return cfg1_map(priv, busnum, devfn, where);
+
+ return NULL;
+}
+
+static int loongson_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+ u8 val;
+
+ irq = of_irq_parse_and_map_pci(dev, slot, pin);
+ if (irq > 0)
+ return irq;
+
+ /* Care i8259 legacy systems */
+ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &val);
+ /* i8259 only have 15 IRQs */
+ if (val > 15)
+ return 0;
+
+ return val;
+}
+
+/* H/w only accept 32-bit PCI operations */
+static struct pci_ops loongson_pci_ops = {
+ .map_bus = pci_loongson_map_bus,
+ .read = pci_generic_config_read32,
+ .write = pci_generic_config_write32,
+};
+
+static const struct of_device_id loongson_pci_of_match[] = {
+ { .compatible = "loongson,ls2k-pci",
+ .data = (void *)(FLAG_CFG0 | FLAG_CFG1 | FLAG_DEV_FIX), },
+ { .compatible = "loongson,ls7a-pci",
+ .data = (void *)(FLAG_CFG0 | FLAG_CFG1 | FLAG_DEV_FIX), },
+ { .compatible = "loongson,rs780e-pci",
+ .data = (void *)(FLAG_CFG0), },
+ {}
+};
+
+static int loongson_pci_probe(struct platform_device *pdev)
+{
+ struct loongson_pci *priv;
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
+ struct pci_host_bridge *bridge;
+ struct resource *regs;
+ int err;
+
+ if (!node)
+ return -ENODEV;
+
+ bridge = devm_pci_alloc_host_bridge(dev, sizeof(*priv));
+ if (!bridge)
+ return -ENODEV;
+
+ priv = pci_host_bridge_priv(bridge);
+ priv->pdev = pdev;
+ priv->flags = (unsigned long)of_device_get_match_data(dev);
+
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!regs) {
+ dev_err(dev, "missing mem resources for cfg0\n");
+ return -EINVAL;
+ }
+
+ priv->cfg0_base = devm_pci_remap_cfg_resource(dev, regs);
+ if (IS_ERR(priv->cfg0_base))
+ return PTR_ERR(priv->cfg0_base);
+
+ /* CFG1 is optional */
+ if (priv->flags & FLAG_CFG1) {
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!regs)
+ dev_info(dev, "missing mem resource for cfg1\n");
+ else {
+ priv->cfg1_base = devm_pci_remap_cfg_resource(dev, regs);
+ if (IS_ERR(priv->cfg1_base))
+ priv->cfg1_base = NULL;
+ }
+ }
+
+ err = pci_parse_request_of_pci_ranges(dev, &bridge->windows,
+ &bridge->dma_ranges, NULL);
+ if (err) {
+ dev_err(dev, "failed to get bridge resources\n");
+ return err;
+ }
+
+ bridge->dev.parent = dev;
+ bridge->sysdata = priv;
+ bridge->ops = &loongson_pci_ops;
+ bridge->map_irq = loongson_map_irq;
+
+ err = pci_host_probe(bridge);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+static struct platform_driver loongson_pci_driver = {
+ .driver = {
+ .name = "loongson-pci",
+ .of_match_table = loongson_pci_of_match,
+ },
+ .probe = loongson_pci_probe,
+};
+builtin_platform_driver(loongson_pci_driver);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 77b8a145c39b..d9c2c3301a8a 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1822,7 +1822,7 @@ int pci_setup_device(struct pci_dev *dev)
/* Device class may be changed after fixup */
class = dev->class >> 8;
- if (dev->non_compliant_bars) {
+ if (dev->non_compliant_bars && !dev->mmio_always_on) {
pci_read_config_word(dev, PCI_COMMAND, &cmd);
if (cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
pci_info(dev, "device has non-compliant BARs; disabling IO/MEM decoding\n");
diff --git a/drivers/platform/mips/Kconfig b/drivers/platform/mips/Kconfig
index 5e77b0dc5fd6..8ac149173c64 100644
--- a/drivers/platform/mips/Kconfig
+++ b/drivers/platform/mips/Kconfig
@@ -24,4 +24,10 @@ config CPU_HWMON
help
Loongson-3A/3B CPU Hwmon (temperature sensor) driver.
+config RS780E_ACPI
+ bool "Loongson RS780E ACPI Controller"
+ depends on MACH_LOONGSON64 || COMPILE_TEST
+ help
+ Loongson RS780E PCH ACPI Controller driver.
+
endif # MIPS_PLATFORM_DEVICES
diff --git a/drivers/platform/mips/Makefile b/drivers/platform/mips/Makefile
index be8146c20dc8..178149098777 100644
--- a/drivers/platform/mips/Makefile
+++ b/drivers/platform/mips/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_CPU_HWMON) += cpu_hwmon.o
+obj-$(CONFIG_RS780E_ACPI) += rs780e-acpi.o
diff --git a/arch/mips/loongson64/acpi_init.c b/drivers/platform/mips/rs780e-acpi.c
index 8d7c119ddf91..e5a643b78ac9 100644
--- a/arch/mips/loongson64/acpi_init.c
+++ b/drivers/platform/mips/rs780e-acpi.c
@@ -3,32 +3,23 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/export.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
-#define SBX00_ACPI_IO_BASE 0x800
-#define SBX00_ACPI_IO_SIZE 0x100
+static unsigned long acpi_iobase;
-#define ACPI_PM_EVT_BLK (SBX00_ACPI_IO_BASE + 0x00) /* 4 bytes */
-#define ACPI_PM_CNT_BLK (SBX00_ACPI_IO_BASE + 0x04) /* 2 bytes */
-#define ACPI_PMA_CNT_BLK (SBX00_ACPI_IO_BASE + 0x0F) /* 1 byte */
-#define ACPI_PM_TMR_BLK (SBX00_ACPI_IO_BASE + 0x18) /* 4 bytes */
-#define ACPI_GPE0_BLK (SBX00_ACPI_IO_BASE + 0x10) /* 8 bytes */
-#define ACPI_END (SBX00_ACPI_IO_BASE + 0x80)
+#define ACPI_PM_EVT_BLK (acpi_iobase + 0x00) /* 4 bytes */
+#define ACPI_PM_CNT_BLK (acpi_iobase + 0x04) /* 2 bytes */
+#define ACPI_PMA_CNT_BLK (acpi_iobase + 0x0F) /* 1 byte */
+#define ACPI_PM_TMR_BLK (acpi_iobase + 0x18) /* 4 bytes */
+#define ACPI_GPE0_BLK (acpi_iobase + 0x10) /* 8 bytes */
+#define ACPI_END (acpi_iobase + 0x80)
#define PM_INDEX 0xCD6
#define PM_DATA 0xCD7
#define PM2_INDEX 0xCD0
#define PM2_DATA 0xCD1
-/*
- * SCI interrupt need acpi space, allocate here
- */
-
-static int __init register_acpi_resource(void)
-{
- request_region(SBX00_ACPI_IO_BASE, SBX00_ACPI_IO_SIZE, "acpi");
- return 0;
-}
-
static void pmio_write_index(u16 index, u8 reg, u8 value)
{
outb(reg, index);
@@ -141,11 +132,38 @@ void acpi_registers_setup(void)
pm2_iowrite(0xf8, value);
}
-int __init sbx00_acpi_init(void)
+static int rs780e_acpi_probe(struct platform_device *pdev)
{
- register_acpi_resource();
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!res)
+ return -ENODEV;
+
+ /* SCI interrupt need acpi space, allocate here */
+ if (!request_region(res->start, resource_size(res), "acpi")) {
+ pr_err("RS780E-ACPI: Failed to request IO Region\n");
+ return -EBUSY;
+ }
+
+ acpi_iobase = res->start;
+
acpi_registers_setup();
acpi_hw_clear_status();
return 0;
}
+
+static const struct of_device_id rs780e_acpi_match[] = {
+ { .compatible = "loongson,rs780e-acpi" },
+ {},
+};
+
+static struct platform_driver rs780e_acpi_driver = {
+ .probe = rs780e_acpi_probe,
+ .driver = {
+ .name = "RS780E-ACPI",
+ .of_match_table = rs780e_acpi_match,
+ },
+};
+builtin_platform_driver(rs780e_acpi_driver);
diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index db7df7daa0d8..7056a25479d6 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -188,6 +188,23 @@ static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm,
}
#endif
+
+/*
+ * If two threads concurrently fault at the same page, the thread that
+ * won the race updates the PTE and its local TLB/Cache. The other thread
+ * gives up, simply does nothing, and continues; on architectures where
+ * software can update TLB, local TLB can be updated here to avoid next page
+ * fault. This function updates TLB only, do nothing with cache or others.
+ * It is the difference with function update_mmu_cache.
+ */
+#ifndef __HAVE_ARCH_UPDATE_MMU_TLB
+static inline void update_mmu_tlb(struct vm_area_struct *vma,
+ unsigned long address, pte_t *ptep)
+{
+}
+#define __HAVE_ARCH_UPDATE_MMU_TLB
+#endif
+
/*
* Some architectures may be able to avoid expensive synchronization
* primitives when modifications are made to PTE's which are already
@@ -227,6 +244,22 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addres
}
#endif
+/*
+ * On some architectures hardware does not set page access bit when accessing
+ * memory page, it is responsibilty of software setting this bit. It brings
+ * out extra page fault penalty to track page access bit. For optimization page
+ * access bit can be set during all page fault flow on these arches.
+ * To be differentiate with macro pte_mkyoung, this macro is used on platforms
+ * where software maintains page access bit.
+ */
+#ifndef pte_sw_mkyoung
+static inline pte_t pte_sw_mkyoung(pte_t pte)
+{
+ return pte;
+}
+#define pte_sw_mkyoung pte_sw_mkyoung
+#endif
+
#ifndef pte_savedwrite
#define pte_savedwrite pte_write
#endif
diff --git a/init/Kconfig b/init/Kconfig
index 74a5ac65644f..5c7bafe8bb0b 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -23,6 +23,9 @@ config LD_VERSION
config CC_IS_CLANG
def_bool $(success,$(CC) --version | head -n 1 | grep -q clang)
+config LD_IS_LLD
+ def_bool $(success,$(LD) -v | head -n 1 | grep -q LLD)
+
config CLANG_VERSION
int
default $(shell,$(srctree)/scripts/clang-version.sh $(CC))
diff --git a/mm/memory.c b/mm/memory.c
index 21438278afca..a0e21e2c571e 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -2434,10 +2434,9 @@ static inline bool cow_user_page(struct page *dst, struct page *src,
if (!likely(pte_same(*vmf->pte, vmf->orig_pte))) {
/*
* Other thread has already handled the fault
- * and we don't need to do anything. If it's
- * not the case, the fault will be triggered
- * again on the same address.
+ * and update local tlb only
*/
+ update_mmu_tlb(vma, addr, vmf->pte);
ret = false;
goto pte_unlock;
}
@@ -2461,7 +2460,8 @@ static inline bool cow_user_page(struct page *dst, struct page *src,
vmf->pte = pte_offset_map_lock(mm, vmf->pmd, addr, &vmf->ptl);
locked = true;
if (!likely(pte_same(*vmf->pte, vmf->orig_pte))) {
- /* The PTE changed under us. Retry page fault. */
+ /* The PTE changed under us, update local tlb */
+ update_mmu_tlb(vma, addr, vmf->pte);
ret = false;
goto pte_unlock;
}
@@ -2702,6 +2702,7 @@ static vm_fault_t wp_page_copy(struct vm_fault *vmf)
}
flush_cache_page(vma, vmf->address, pte_pfn(vmf->orig_pte));
entry = mk_pte(new_page, vma->vm_page_prot);
+ entry = pte_sw_mkyoung(entry);
entry = maybe_mkwrite(pte_mkdirty(entry), vma);
/*
* Clear the pte entry and flush it first, before updating the
@@ -2750,6 +2751,7 @@ static vm_fault_t wp_page_copy(struct vm_fault *vmf)
new_page = old_page;
page_copied = 1;
} else {
+ update_mmu_tlb(vma, vmf->address, vmf->pte);
mem_cgroup_cancel_charge(new_page, memcg, false);
}
@@ -2810,6 +2812,7 @@ vm_fault_t finish_mkwrite_fault(struct vm_fault *vmf)
* pte_offset_map_lock.
*/
if (!pte_same(*vmf->pte, vmf->orig_pte)) {
+ update_mmu_tlb(vmf->vma, vmf->address, vmf->pte);
pte_unmap_unlock(vmf->pte, vmf->ptl);
return VM_FAULT_NOPAGE;
}
@@ -2934,6 +2937,7 @@ static vm_fault_t do_wp_page(struct vm_fault *vmf)
vmf->pte = pte_offset_map_lock(vma->vm_mm, vmf->pmd,
vmf->address, &vmf->ptl);
if (!pte_same(*vmf->pte, vmf->orig_pte)) {
+ update_mmu_tlb(vma, vmf->address, vmf->pte);
unlock_page(vmf->page);
pte_unmap_unlock(vmf->pte, vmf->ptl);
put_page(vmf->page);
@@ -3339,8 +3343,10 @@ static vm_fault_t do_anonymous_page(struct vm_fault *vmf)
vma->vm_page_prot));
vmf->pte = pte_offset_map_lock(vma->vm_mm, vmf->pmd,
vmf->address, &vmf->ptl);
- if (!pte_none(*vmf->pte))
+ if (!pte_none(*vmf->pte)) {
+ update_mmu_tlb(vma, vmf->address, vmf->pte);
goto unlock;
+ }
ret = check_stable_address_space(vma->vm_mm);
if (ret)
goto unlock;
@@ -3371,13 +3377,16 @@ static vm_fault_t do_anonymous_page(struct vm_fault *vmf)
__SetPageUptodate(page);
entry = mk_pte(page, vma->vm_page_prot);
+ entry = pte_sw_mkyoung(entry);
if (vma->vm_flags & VM_WRITE)
entry = pte_mkwrite(pte_mkdirty(entry));
vmf->pte = pte_offset_map_lock(vma->vm_mm, vmf->pmd, vmf->address,
&vmf->ptl);
- if (!pte_none(*vmf->pte))
+ if (!pte_none(*vmf->pte)) {
+ update_mmu_cache(vma, vmf->address, vmf->pte);
goto release;
+ }
ret = check_stable_address_space(vma->vm_mm);
if (ret)
@@ -3644,11 +3653,14 @@ vm_fault_t alloc_set_pte(struct vm_fault *vmf, struct mem_cgroup *memcg,
}
/* Re-check under ptl */
- if (unlikely(!pte_none(*vmf->pte)))
+ if (unlikely(!pte_none(*vmf->pte))) {
+ update_mmu_tlb(vma, vmf->address, vmf->pte);
return VM_FAULT_NOPAGE;
+ }
flush_icache_page(vma, page);
entry = mk_pte(page, vma->vm_page_prot);
+ entry = pte_sw_mkyoung(entry);
if (write)
entry = maybe_mkwrite(pte_mkdirty(entry), vma);
/* copy-on-write page */
@@ -4222,8 +4234,10 @@ static vm_fault_t handle_pte_fault(struct vm_fault *vmf)
vmf->ptl = pte_lockptr(vmf->vma->vm_mm, vmf->pmd);
spin_lock(vmf->ptl);
entry = vmf->orig_pte;
- if (unlikely(!pte_same(*vmf->pte, entry)))
+ if (unlikely(!pte_same(*vmf->pte, entry))) {
+ update_mmu_tlb(vmf->vma, vmf->address, vmf->pte);
goto unlock;
+ }
if (vmf->flags & FAULT_FLAG_WRITE) {
if (!pte_write(entry))
return do_wp_page(vmf);
diff --git a/sound/soc/txx9/txx9aclc-ac97.c b/sound/soc/txx9/txx9aclc-ac97.c
index b1d9615f2375..d9e348444bd0 100644
--- a/sound/soc/txx9/txx9aclc-ac97.c
+++ b/sound/soc/txx9/txx9aclc-ac97.c
@@ -14,6 +14,7 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/gfp.h>
+#include <asm/mach-tx39xx/ioremap.h> /* for TXX9_DIRECTMAP_BASE */
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>