diff options
-rw-r--r-- | arch/powerpc/include/asm/asm-prototypes.h | 2 | ||||
-rw-r--r-- | arch/powerpc/include/asm/exception-64s.h | 8 | ||||
-rw-r--r-- | arch/powerpc/kernel/exceptions-64s.S | 202 | ||||
-rw-r--r-- | arch/powerpc/mm/Makefile | 4 | ||||
-rw-r--r-- | arch/powerpc/mm/slb.c | 289 | ||||
-rw-r--r-- | arch/powerpc/mm/slb_low.S | 335 |
6 files changed, 214 insertions, 626 deletions
diff --git a/arch/powerpc/include/asm/asm-prototypes.h b/arch/powerpc/include/asm/asm-prototypes.h index 9bc98c239305..2741831482f4 100644 --- a/arch/powerpc/include/asm/asm-prototypes.h +++ b/arch/powerpc/include/asm/asm-prototypes.h @@ -77,6 +77,8 @@ void kernel_bad_stack(struct pt_regs *regs); void system_reset_exception(struct pt_regs *regs); void machine_check_exception(struct pt_regs *regs); void emulation_assist_interrupt(struct pt_regs *regs); +long do_slb_fault(struct pt_regs *regs, unsigned long ea); +void do_bad_slb_fault(struct pt_regs *regs, unsigned long ea, long err); /* signals, syscalls and interrupts */ long sys_swapcontext(struct ucontext __user *old_ctx, diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h index 403d73898a9a..3b4767ed3ec5 100644 --- a/arch/powerpc/include/asm/exception-64s.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -61,14 +61,6 @@ #define MAX_MCE_DEPTH 4 /* - * EX_LR is only used in EXSLB and where it does not overlap with EX_DAR - * EX_CCR similarly with DSISR, but being 4 byte registers there is a hole - * in the save area so it's not necessary to overlap them. Could be used - * for future savings though if another 4 byte register was to be saved. - */ -#define EX_LR EX_DAR - -/* * EX_R3 is only used by the bad_stack handler. bad_stack reloads and * saves DAR from SPRN_DAR, and EX_DAR is not used. So EX_R3 can overlap * with EX_DAR. diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index b9239dbf6d59..89d32bb79d5e 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -596,28 +596,36 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) EXC_REAL_BEGIN(data_access_slb, 0x380, 0x80) - SET_SCRATCH0(r13) - EXCEPTION_PROLOG_0(PACA_EXSLB) - EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST_PR, 0x380) - mr r12,r3 /* save r3 */ - mfspr r3,SPRN_DAR - mfspr r11,SPRN_SRR1 - crset 4*cr6+eq - BRANCH_TO_COMMON(r10, slb_miss_common) +EXCEPTION_PROLOG(PACA_EXSLB, data_access_slb_common, EXC_STD, KVMTEST_PR, 0x380); EXC_REAL_END(data_access_slb, 0x380, 0x80) EXC_VIRT_BEGIN(data_access_slb, 0x4380, 0x80) - SET_SCRATCH0(r13) - EXCEPTION_PROLOG_0(PACA_EXSLB) - EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x380) - mr r12,r3 /* save r3 */ - mfspr r3,SPRN_DAR - mfspr r11,SPRN_SRR1 - crset 4*cr6+eq - BRANCH_TO_COMMON(r10, slb_miss_common) +EXCEPTION_RELON_PROLOG(PACA_EXSLB, data_access_slb_common, EXC_STD, NOTEST, 0x380); EXC_VIRT_END(data_access_slb, 0x4380, 0x80) + TRAMP_KVM_SKIP(PACA_EXSLB, 0x380) +EXC_COMMON_BEGIN(data_access_slb_common) + mfspr r10,SPRN_DAR + std r10,PACA_EXSLB+EX_DAR(r13) + EXCEPTION_PROLOG_COMMON(0x380, PACA_EXSLB) + ld r4,PACA_EXSLB+EX_DAR(r13) + std r4,_DAR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + bl do_slb_fault + cmpdi r3,0 + bne- 1f + b fast_exception_return +1: /* Error case */ + std r3,RESULT(r1) + bl save_nvgprs + RECONCILE_IRQ_STATE(r10, r11) + ld r4,_DAR(r1) + ld r5,RESULT(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + bl do_bad_slb_fault + b ret_from_except + EXC_REAL(instruction_access, 0x400, 0x80) EXC_VIRT(instruction_access, 0x4400, 0x80, 0x400) @@ -640,160 +648,34 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) EXC_REAL_BEGIN(instruction_access_slb, 0x480, 0x80) - SET_SCRATCH0(r13) - EXCEPTION_PROLOG_0(PACA_EXSLB) - EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST_PR, 0x480) - mr r12,r3 /* save r3 */ - mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ - mfspr r11,SPRN_SRR1 - crclr 4*cr6+eq - BRANCH_TO_COMMON(r10, slb_miss_common) +EXCEPTION_PROLOG(PACA_EXSLB, instruction_access_slb_common, EXC_STD, KVMTEST_PR, 0x480); EXC_REAL_END(instruction_access_slb, 0x480, 0x80) EXC_VIRT_BEGIN(instruction_access_slb, 0x4480, 0x80) - SET_SCRATCH0(r13) - EXCEPTION_PROLOG_0(PACA_EXSLB) - EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x480) - mr r12,r3 /* save r3 */ - mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ - mfspr r11,SPRN_SRR1 - crclr 4*cr6+eq - BRANCH_TO_COMMON(r10, slb_miss_common) +EXCEPTION_RELON_PROLOG(PACA_EXSLB, instruction_access_slb_common, EXC_STD, NOTEST, 0x480); EXC_VIRT_END(instruction_access_slb, 0x4480, 0x80) -TRAMP_KVM(PACA_EXSLB, 0x480) - - -/* - * This handler is used by the 0x380 and 0x480 SLB miss interrupts, as well as - * the virtual mode 0x4380 and 0x4480 interrupts if AIL is enabled. - */ -EXC_COMMON_BEGIN(slb_miss_common) - /* - * r13 points to the PACA, r9 contains the saved CR, - * r12 contains the saved r3, - * r11 contain the saved SRR1, SRR0 is still ready for return - * r3 has the faulting address - * r9 - r13 are saved in paca->exslb. - * cr6.eq is set for a D-SLB miss, clear for a I-SLB miss - * We assume we aren't going to take any exceptions during this - * procedure. - */ - mflr r10 - stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ - std r10,PACA_EXSLB+EX_LR(r13) /* save LR */ - - andi. r9,r11,MSR_PR // Check for exception from userspace - cmpdi cr4,r9,MSR_PR // And save the result in CR4 for later - - /* - * Test MSR_RI before calling slb_allocate_realmode, because the - * MSR in r11 gets clobbered. However we still want to allocate - * SLB in case MSR_RI=0, to minimise the risk of getting stuck in - * recursive SLB faults. So use cr5 for this, which is preserved. - */ - andi. r11,r11,MSR_RI /* check for unrecoverable exception */ - cmpdi cr5,r11,MSR_RI - - crset 4*cr0+eq -#ifdef CONFIG_PPC_BOOK3S_64 -BEGIN_MMU_FTR_SECTION - bl slb_allocate -END_MMU_FTR_SECTION_IFCLR(MMU_FTR_TYPE_RADIX) -#endif - - ld r10,PACA_EXSLB+EX_LR(r13) - lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ - mtlr r10 - - /* - * Large address, check whether we have to allocate new contexts. - */ - beq- 8f - bne- cr5,2f /* if unrecoverable exception, oops */ - - /* All done -- return from exception. */ - - bne cr4,1f /* returning to kernel */ - - mtcrf 0x80,r9 - mtcrf 0x08,r9 /* MSR[PR] indication is in cr4 */ - mtcrf 0x04,r9 /* MSR[RI] indication is in cr5 */ - mtcrf 0x02,r9 /* I/D indication is in cr6 */ - mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */ - - RESTORE_CTR(r9, PACA_EXSLB) - RESTORE_PPR_PACA(PACA_EXSLB, r9) - mr r3,r12 - ld r9,PACA_EXSLB+EX_R9(r13) - ld r10,PACA_EXSLB+EX_R10(r13) - ld r11,PACA_EXSLB+EX_R11(r13) - ld r12,PACA_EXSLB+EX_R12(r13) - ld r13,PACA_EXSLB+EX_R13(r13) - RFI_TO_USER - b . /* prevent speculative execution */ -1: - mtcrf 0x80,r9 - mtcrf 0x08,r9 /* MSR[PR] indication is in cr4 */ - mtcrf 0x04,r9 /* MSR[RI] indication is in cr5 */ - mtcrf 0x02,r9 /* I/D indication is in cr6 */ - mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */ - - RESTORE_CTR(r9, PACA_EXSLB) - RESTORE_PPR_PACA(PACA_EXSLB, r9) - mr r3,r12 - ld r9,PACA_EXSLB+EX_R9(r13) - ld r10,PACA_EXSLB+EX_R10(r13) - ld r11,PACA_EXSLB+EX_R11(r13) - ld r12,PACA_EXSLB+EX_R12(r13) - ld r13,PACA_EXSLB+EX_R13(r13) - RFI_TO_KERNEL - b . /* prevent speculative execution */ - - -2: std r3,PACA_EXSLB+EX_DAR(r13) - mr r3,r12 - mfspr r11,SPRN_SRR0 - mfspr r12,SPRN_SRR1 - LOAD_HANDLER(r10,unrecov_slb) - mtspr SPRN_SRR0,r10 - ld r10,PACAKMSR(r13) - mtspr SPRN_SRR1,r10 - RFI_TO_KERNEL - b . - -8: std r3,PACA_EXSLB+EX_DAR(r13) - mr r3,r12 - mfspr r11,SPRN_SRR0 - mfspr r12,SPRN_SRR1 - LOAD_HANDLER(r10, large_addr_slb) - mtspr SPRN_SRR0,r10 - ld r10,PACAKMSR(r13) - mtspr SPRN_SRR1,r10 - RFI_TO_KERNEL - b . +TRAMP_KVM(PACA_EXSLB, 0x480) -EXC_COMMON_BEGIN(unrecov_slb) - EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB) - RECONCILE_IRQ_STATE(r10, r11) +EXC_COMMON_BEGIN(instruction_access_slb_common) + EXCEPTION_PROLOG_COMMON(0x480, PACA_EXSLB) + ld r4,_NIP(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + bl do_slb_fault + cmpdi r3,0 + bne- 1f + b fast_exception_return +1: /* Error case */ + std r3,RESULT(r1) bl save_nvgprs -1: addi r3,r1,STACK_FRAME_OVERHEAD - bl unrecoverable_exception - b 1b - -EXC_COMMON_BEGIN(large_addr_slb) - EXCEPTION_PROLOG_COMMON(0x380, PACA_EXSLB) RECONCILE_IRQ_STATE(r10, r11) - ld r3, PACA_EXSLB+EX_DAR(r13) - std r3, _DAR(r1) - beq cr6, 2f - li r10, 0x481 /* fix trap number for I-SLB miss */ - std r10, _TRAP(r1) -2: bl save_nvgprs - addi r3, r1, STACK_FRAME_OVERHEAD - bl slb_miss_large_addr + ld r4,_NIP(r1) + ld r5,RESULT(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + bl do_bad_slb_fault b ret_from_except + EXC_REAL_BEGIN(hardware_interrupt, 0x500, 0x100) .globl hardware_interrupt_hv; hardware_interrupt_hv: diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 3c844bdd16c4..ceb352ccbc76 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -7,6 +7,8 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC) +CFLAGS_REMOVE_slb.o = $(CC_FLAGS_FTRACE) + obj-y := fault.o mem.o pgtable.o mmap.o \ init_$(BITS).o pgtable_$(BITS).o \ init-common.o mmu_context.o drmem.o @@ -15,7 +17,7 @@ obj-$(CONFIG_PPC_MMU_NOHASH) += mmu_context_nohash.o tlb_nohash.o \ obj-$(CONFIG_PPC_BOOK3E) += tlb_low_$(BITS)e.o hash64-$(CONFIG_PPC_NATIVE) := hash_native_64.o obj-$(CONFIG_PPC_BOOK3E_64) += pgtable-book3e.o -obj-$(CONFIG_PPC_BOOK3S_64) += pgtable-hash64.o hash_utils_64.o slb_low.o slb.o $(hash64-y) mmu_context_book3s64.o pgtable-book3s64.o +obj-$(CONFIG_PPC_BOOK3S_64) += pgtable-hash64.o hash_utils_64.o slb.o $(hash64-y) mmu_context_book3s64.o pgtable-book3s64.o obj-$(CONFIG_PPC_RADIX_MMU) += pgtable-radix.o tlb-radix.o obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu_32.o hash_low_32.o mmu_context_hash32.o obj-$(CONFIG_PPC_STD_MMU) += tlb_hash$(BITS).o diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index 513c6596140d..76c1a9523049 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -14,6 +14,7 @@ * 2 of the License, or (at your option) any later version. */ +#include <asm/asm-prototypes.h> #include <asm/pgtable.h> #include <asm/mmu.h> #include <asm/mmu_context.h> @@ -33,7 +34,7 @@ enum slb_index { KSTACK_INDEX = 1, /* Kernel stack map */ }; -extern void slb_allocate(unsigned long ea); +static long slb_allocate_user(struct mm_struct *mm, unsigned long ea); #define slb_esid_mask(ssize) \ (((ssize) == MMU_SEGSIZE_256M)? ESID_MASK: ESID_MASK_1T) @@ -44,13 +45,19 @@ static inline unsigned long mk_esid_data(unsigned long ea, int ssize, return (ea & slb_esid_mask(ssize)) | SLB_ESID_V | index; } -static inline unsigned long mk_vsid_data(unsigned long ea, int ssize, +static inline unsigned long __mk_vsid_data(unsigned long vsid, int ssize, unsigned long flags) { - return (get_kernel_vsid(ea, ssize) << slb_vsid_shift(ssize)) | flags | + return (vsid << slb_vsid_shift(ssize)) | flags | ((unsigned long) ssize << SLB_VSID_SSIZE_SHIFT); } +static inline unsigned long mk_vsid_data(unsigned long ea, int ssize, + unsigned long flags) +{ + return __mk_vsid_data(get_kernel_vsid(ea, ssize), ssize, flags); +} + static inline void slb_shadow_update(unsigned long ea, int ssize, unsigned long flags, enum slb_index index) @@ -353,49 +360,19 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm) is_kernel_addr(exec_base)) return; - slb_allocate(pc); + slb_allocate_user(mm, pc); if (!esids_match(pc, stack)) - slb_allocate(stack); + slb_allocate_user(mm, stack); if (!esids_match(pc, exec_base) && !esids_match(stack, exec_base)) - slb_allocate(exec_base); -} - -static inline void patch_slb_encoding(unsigned int *insn_addr, - unsigned int immed) -{ - - /* - * This function patches either an li or a cmpldi instruction with - * a new immediate value. This relies on the fact that both li - * (which is actually addi) and cmpldi both take a 16-bit immediate - * value, and it is situated in the same location in the instruction, - * ie. bits 16-31 (Big endian bit order) or the lower 16 bits. - * The signedness of the immediate operand differs between the two - * instructions however this code is only ever patching a small value, - * much less than 1 << 15, so we can get away with it. - * To patch the value we read the existing instruction, clear the - * immediate value, and or in our new value, then write the instruction - * back. - */ - unsigned int insn = (*insn_addr & 0xffff0000) | immed; - patch_instruction(insn_addr, insn); + slb_allocate_user(mm, exec_base); } -extern u32 slb_miss_kernel_load_linear[]; -extern u32 slb_miss_kernel_load_io[]; -extern u32 slb_compare_rr_to_size[]; -extern u32 slb_miss_kernel_load_vmemmap[]; - void slb_set_size(u16 size) { - if (mmu_slb_size == size) - return; - mmu_slb_size = size; - patch_slb_encoding(slb_compare_rr_to_size, mmu_slb_size); } void slb_initialize(void) @@ -417,19 +394,9 @@ void slb_initialize(void) #endif if (!slb_encoding_inited) { slb_encoding_inited = 1; - patch_slb_encoding(slb_miss_kernel_load_linear, - SLB_VSID_KERNEL | linear_llp); - patch_slb_encoding(slb_miss_kernel_load_io, - SLB_VSID_KERNEL | io_llp); - patch_slb_encoding(slb_compare_rr_to_size, - mmu_slb_size); - pr_devel("SLB: linear LLP = %04lx\n", linear_llp); pr_devel("SLB: io LLP = %04lx\n", io_llp); - #ifdef CONFIG_SPARSEMEM_VMEMMAP - patch_slb_encoding(slb_miss_kernel_load_vmemmap, - SLB_VSID_KERNEL | vmemmap_llp); pr_devel("SLB: vmemmap LLP = %04lx\n", vmemmap_llp); #endif } @@ -458,125 +425,203 @@ void slb_initialize(void) asm volatile("isync":::"memory"); } -static void insert_slb_entry(unsigned long vsid, unsigned long ea, - int bpsize, int ssize) +static void slb_cache_update(unsigned long esid_data) { - unsigned long flags, vsid_data, esid_data; - enum slb_index index; int slb_cache_index; if (cpu_has_feature(CPU_FTR_ARCH_300)) return; /* ISAv3.0B and later does not use slb_cache */ /* - * We are irq disabled, hence should be safe to access PACA. + * Now update slb cache entries */ - VM_WARN_ON(!irqs_disabled()); + slb_cache_index = local_paca->slb_cache_ptr; + if (slb_cache_index < SLB_CACHE_ENTRIES) { + /* + * We have space in slb cache for optimized switch_slb(). + * Top 36 bits from esid_data as per ISA + */ + local_paca->slb_cache[slb_cache_index++] = esid_data >> 28; + local_paca->slb_cache_ptr++; + } else { + /* + * Our cache is full and the current cache content strictly + * doesn't indicate the active SLB conents. Bump the ptr + * so that switch_slb() will ignore the cache. + */ + local_paca->slb_cache_ptr = SLB_CACHE_ENTRIES + 1; + } +} - /* - * We can't take a PMU exception in the following code, so hard - * disable interrupts. - */ - hard_irq_disable(); +static enum slb_index alloc_slb_index(void) +{ + enum slb_index index; + /* round-robin replacement of slb starting at SLB_NUM_BOLTED. */ index = get_paca()->stab_rr; - - /* - * simple round-robin replacement of slb starting at SLB_NUM_BOLTED. - */ if (index < (mmu_slb_size - 1)) index++; else index = SLB_NUM_BOLTED; - get_paca()->stab_rr = index; - flags = SLB_VSID_USER | mmu_psize_defs[bpsize].sllp; - vsid_data = (vsid << slb_vsid_shift(ssize)) | flags | - ((unsigned long) ssize << SLB_VSID_SSIZE_SHIFT); + return index; +} + +static long slb_insert_entry(unsigned long ea, unsigned long context, + unsigned long flags, int ssize, bool kernel) +{ + unsigned long vsid; + unsigned long vsid_data, esid_data; + enum slb_index index; + + vsid = get_vsid(context, ea, ssize); + if (!vsid) + return -EFAULT; + + /* + * There must not be a kernel SLB fault in alloc_slb_index or before + * slbmte here or the allocation bitmaps could get out of whack with + * the SLB. + * + * User SLB faults or preloads take this path which might get inlined + * into the caller, so add compiler barriers here to ensure unsafe + * memory accesses do not come between. + */ + barrier(); + + index = alloc_slb_index(); + + vsid_data = __mk_vsid_data(vsid, ssize, flags); esid_data = mk_esid_data(ea, ssize, index); /* * No need for an isync before or after this slbmte. The exception * we enter with and the rfid we exit with are context synchronizing. - * Also we only handle user segments here. + * User preloads should add isync afterwards in case the kernel + * accesses user memory before it returns to userspace with rfid. */ - asm volatile("slbmte %0, %1" : : "r" (vsid_data), "r" (esid_data) - : "memory"); + asm volatile("slbmte %0, %1" : : "r" (vsid_data), "r" (esid_data)); - /* - * Now update slb cache entries - */ - slb_cache_index = get_paca()->slb_cache_ptr; - if (slb_cache_index < SLB_CACHE_ENTRIES) { - /* - * We have space in slb cache for optimized switch_slb(). - * Top 36 bits from esid_data as per ISA - */ - get_paca()->slb_cache[slb_cache_index++] = esid_data >> 28; - get_paca()->slb_cache_ptr++; + barrier(); + + if (!kernel) + slb_cache_update(esid_data); + + return 0; +} + +static long slb_allocate_kernel(unsigned long ea, unsigned long id) +{ + unsigned long context; + unsigned long flags; + int ssize; + + if ((ea & ~REGION_MASK) >= (1ULL << MAX_EA_BITS_PER_CONTEXT)) + return -EFAULT; + + if (id == KERNEL_REGION_ID) { + flags = SLB_VSID_KERNEL | mmu_psize_defs[mmu_linear_psize].sllp; +#ifdef CONFIG_SPARSEMEM_VMEMMAP + } else if (id == VMEMMAP_REGION_ID) { + flags = SLB_VSID_KERNEL | mmu_psize_defs[mmu_vmemmap_psize].sllp; +#endif + } else if (id == VMALLOC_REGION_ID) { + if (ea < H_VMALLOC_END) + flags = get_paca()->vmalloc_sllp; + else + flags = SLB_VSID_KERNEL | mmu_psize_defs[mmu_io_psize].sllp; } else { - /* - * Our cache is full and the current cache content strictly - * doesn't indicate the active SLB conents. Bump the ptr - * so that switch_slb() will ignore the cache. - */ - get_paca()->slb_cache_ptr = SLB_CACHE_ENTRIES + 1; + return -EFAULT; } + + ssize = MMU_SEGSIZE_1T; + if (!mmu_has_feature(MMU_FTR_1T_SEGMENT)) + ssize = MMU_SEGSIZE_256M; + + context = id - KERNEL_REGION_CONTEXT_OFFSET; + + return slb_insert_entry(ea, context, flags, ssize, true); } -static void handle_multi_context_slb_miss(int context_id, unsigned long ea) +static long slb_allocate_user(struct mm_struct *mm, unsigned long ea) { - struct mm_struct *mm = current->mm; - unsigned long vsid; + unsigned long context; + unsigned long flags; int bpsize; + int ssize; /* - * We are always above 1TB, hence use high user segment size. + * consider this as bad access if we take a SLB miss + * on an address above addr limit. */ - vsid = get_vsid(context_id, ea, mmu_highuser_ssize); + if (ea >= mm->context.slb_addr_limit) + return -EFAULT; + + context = get_ea_context(&mm->context, ea); + if (!context) + return -EFAULT; + + if (unlikely(ea >= H_PGTABLE_RANGE)) { + WARN_ON(1); + return -EFAULT; + } + + ssize = user_segment_size(ea); + bpsize = get_slice_psize(mm, ea); - insert_slb_entry(vsid, ea, bpsize, mmu_highuser_ssize); + flags = SLB_VSID_USER | mmu_psize_defs[bpsize].sllp; + + return slb_insert_entry(ea, context, flags, ssize, false); } -void slb_miss_large_addr(struct pt_regs *regs) +long do_slb_fault(struct pt_regs *regs, unsigned long ea) { - enum ctx_state prev_state = exception_enter(); - unsigned long ea = regs->dar; - int context; + unsigned long id = REGION_ID(ea); - if (REGION_ID(ea) != USER_REGION_ID) - goto slb_bad_addr; + /* IRQs are not reconciled here, so can't check irqs_disabled */ + VM_WARN_ON(mfmsr() & MSR_EE); - /* - * Are we beyound what the page table layout supports ? - */ - if ((ea & ~REGION_MASK) >= H_PGTABLE_RANGE) - goto slb_bad_addr; - - /* Lower address should have been handled by asm code */ - if (ea < (1UL << MAX_EA_BITS_PER_CONTEXT)) - goto slb_bad_addr; + if (unlikely(!(regs->msr & MSR_RI))) + return -EINVAL; /* - * consider this as bad access if we take a SLB miss - * on an address above addr limit. + * SLB kernel faults must be very careful not to touch anything + * that is not bolted. E.g., PACA and global variables are okay, + * mm->context stuff is not. + * + * SLB user faults can access all of kernel memory, but must be + * careful not to touch things like IRQ state because it is not + * "reconciled" here. The difficulty is that we must use + * fast_exception_return to return from kernel SLB faults without + * looking at possible non-bolted memory. We could test user vs + * kernel faults in the interrupt handler asm and do a full fault, + * reconcile, ret_from_except for user faults which would make them + * first class kernel code. But for performance it's probably nicer + * if they go via fast_exception_return too. */ - if (ea >= current->mm->context.slb_addr_limit) - goto slb_bad_addr; + if (id >= KERNEL_REGION_ID) { + return slb_allocate_kernel(ea, id); + } else { + struct mm_struct *mm = current->mm; - context = get_ea_context(¤t->mm->context, ea); - if (!context) - goto slb_bad_addr; + if (unlikely(!mm)) + return -EFAULT; - handle_multi_context_slb_miss(context, ea); - exception_exit(prev_state); - return; + return slb_allocate_user(mm, ea); + } +} -slb_bad_addr: - if (user_mode(regs)) - _exception(SIGSEGV, regs, SEGV_BNDERR, ea); - else - bad_page_fault(regs, ea, SIGSEGV); - exception_exit(prev_state); +void do_bad_slb_fault(struct pt_regs *regs, unsigned long ea, long err) +{ + if (err == -EFAULT) { + if (user_mode(regs)) + _exception(SIGSEGV, regs, SEGV_BNDERR, ea); + else + bad_page_fault(regs, ea, SIGSEGV); + } else if (err == -EINVAL) { + unrecoverable_exception(regs); + } else { + BUG(); + } } diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S deleted file mode 100644 index 4d2e921d696e..000000000000 --- a/arch/powerpc/mm/slb_low.S +++ /dev/null @@ -1,335 +0,0 @@ -/* - * Low-level SLB routines - * - * Copyright (C) 2004 David Gibson <dwg@au.ibm.com>, IBM - * - * Based on earlier C version: - * Dave Engebretsen and Mike Corrigan {engebret|mikejc}@us.ibm.com - * Copyright (c) 2001 Dave Engebretsen - * Copyright (C) 2002 Anton Blanchard <anton@au.ibm.com>, IBM - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <asm/processor.h> -#include <asm/ppc_asm.h> -#include <asm/asm-offsets.h> -#include <asm/cputable.h> -#include <asm/page.h> -#include <asm/mmu.h> -#include <asm/pgtable.h> -#include <asm/firmware.h> -#include <asm/feature-fixups.h> - -/* - * This macro generates asm code to compute the VSID scramble - * function. Used in slb_allocate() and do_stab_bolted. The function - * computed is: (protovsid*VSID_MULTIPLIER) % VSID_MODULUS - * - * rt = register containing the proto-VSID and into which the - * VSID will be stored - * rx = scratch register (clobbered) - * rf = flags - * - * - rt and rx must be different registers - * - The answer will end up in the low VSID_BITS bits of rt. The higher - * bits may contain other garbage, so you may need to mask the - * result. - */ -#define ASM_VSID_SCRAMBLE(rt, rx, rf, size) \ - lis rx,VSID_MULTIPLIER_##size@h; \ - ori rx,rx,VSID_MULTIPLIER_##size@l; \ - mulld rt,rt,rx; /* rt = rt * MULTIPLIER */ \ -/* \ - * powermac get slb fault before feature fixup, so make 65 bit part \ - * the default part of feature fixup \ - */ \ -BEGIN_MMU_FTR_SECTION \ - srdi rx,rt,VSID_BITS_65_##size; \ - clrldi rt,rt,(64-VSID_BITS_65_##size); \ - add rt,rt,rx; \ - addi rx,rt,1; \ - srdi rx,rx,VSID_BITS_65_##size; \ - add rt,rt,rx; \ - rldimi rf,rt,SLB_VSID_SHIFT_##size,(64 - (SLB_VSID_SHIFT_##size + VSID_BITS_65_##size)); \ -MMU_FTR_SECTION_ELSE \ - srdi rx,rt,VSID_BITS_##size; \ - clrldi rt,rt,(64-VSID_BITS_##size); \ - add rt,rt,rx; /* add high and low bits */ \ - addi rx,rt,1; \ - srdi rx,rx,VSID_BITS_##size; /* extract 2^VSID_BITS bit */ \ - add rt,rt,rx; \ - rldimi rf,rt,SLB_VSID_SHIFT_##size,(64 - (SLB_VSID_SHIFT_##size + VSID_BITS_##size)); \ -ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_68_BIT_VA) - - -/* void slb_allocate(unsigned long ea); - * - * Create an SLB entry for the given EA (user or kernel). - * r3 = faulting address, r13 = PACA - * r9, r10, r11 are clobbered by this function - * r3 is preserved. - * No other registers are examined or changed. - */ -_GLOBAL(slb_allocate) - /* - * Check if the address falls within the range of the first context, or - * if we may need to handle multi context. For the first context we - * allocate the slb entry via the fast path below. For large address we - * branch out to C-code and see if additional contexts have been - * allocated. - * The test here is: - * (ea & ~REGION_MASK) >= (1ull << MAX_EA_BITS_PER_CONTEXT) - */ - rldicr. r9,r3,4,(63 - MAX_EA_BITS_PER_CONTEXT - 4) - bne- 8f - - srdi r9,r3,60 /* get region */ - srdi r10,r3,SID_SHIFT /* get esid */ - cmpldi cr7,r9,0xc /* cmp PAGE_OFFSET for later use */ - - /* r3 = address, r10 = esid, cr7 = <> PAGE_OFFSET */ - blt cr7,0f /* user or kernel? */ - - /* Check if hitting the linear mapping or some other kernel space - */ - bne cr7,1f - - /* Linear mapping encoding bits, the "li" instruction below will - * be patched by the kernel at boot - */ -.globl slb_miss_kernel_load_linear -slb_miss_kernel_load_linear: - li r11,0 - /* - * context = (ea >> 60) - (0xc - 1) - * r9 = region id. - */ - subi r9,r9,KERNEL_REGION_CONTEXT_OFFSET - -BEGIN_FTR_SECTION - b .Lslb_finish_load -END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT) - b .Lslb_finish_load_1T - -1: -#ifdef CONFIG_SPARSEMEM_VMEMMAP - cmpldi cr0,r9,0xf - bne 1f -/* Check virtual memmap region. To be patched at kernel boot */ -.globl slb_miss_kernel_load_vmemmap -slb_miss_kernel_load_vmemmap: - li r11,0 - b 6f -1: -#endif /* CONFIG_SPARSEMEM_VMEMMAP */ - - /* - * r10 contains the ESID, which is the original faulting EA shifted - * right by 28 bits. We need to compare that with (H_VMALLOC_END >> 28) - * which is 0xd00038000. That can't be used as an immediate, even if we - * ignored the 0xd, so we have to load it into a register, and we only - * have one register free. So we must load all of (H_VMALLOC_END >> 28) - * into a register and compare ESID against that. - */ - lis r11,(H_VMALLOC_END >> 32)@h // r11 = 0xffffffffd0000000 - ori r11,r11,(H_VMALLOC_END >> 32)@l // r11 = 0xffffffffd0003800 - // Rotate left 4, then mask with 0xffffffff0 - rldic r11,r11,4,28 // r11 = 0xd00038000 - cmpld r10,r11 // if r10 >= r11 - bge 5f // goto io_mapping - - /* - * vmalloc mapping gets the encoding from the PACA as the mapping - * can be demoted from 64K -> 4K dynamically on some machines. - */ - lhz r11,PACAVMALLOCSLLP(r13) - b 6f -5: - /* IO mapping */ -.globl slb_miss_kernel_load_io -slb_miss_kernel_load_io: - li r11,0 -6: - /* - * context = (ea >> 60) - (0xc - 1) - * r9 = region id. - */ - subi r9,r9,KERNEL_REGION_CONTEXT_OFFSET - -BEGIN_FTR_SECTION - b .Lslb_finish_load -END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT) - b .Lslb_finish_load_1T - -0: /* - * For userspace addresses, make sure this is region 0. - */ - cmpdi r9, 0 - bne- 8f - /* - * user space make sure we are within the allowed limit - */ - ld r11,PACA_SLB_ADDR_LIMIT(r13) - cmpld r3,r11 - bge- 8f - - /* when using slices, we extract the psize off the slice bitmaps - * and then we need to get the sllp encoding off the mmu_psize_defs - * array. - * - * XXX This is a bit inefficient especially for the normal case, - * so we should try to implement a fast path for the standard page - * size using the old sllp value so we avoid the array. We cannot - * really do dynamic patching unfortunately as processes might flip - * between 4k and 64k standard page size - */ -#ifdef CONFIG_PPC_MM_SLICES - /* r10 have esid */ - cmpldi r10,16 - /* below SLICE_LOW_TOP */ - blt 5f - /* - * Handle hpsizes, - * r9 is get_paca()->context.high_slices_psize[index], r11 is mask_index - */ - srdi r11,r10,(SLICE_HIGH_SHIFT - SLICE_LOW_SHIFT + 1) /* index */ - addi r9,r11,PACAHIGHSLICEPSIZE - lbzx r9,r13,r9 /* r9 is hpsizes[r11] */ - /* r11 = (r10 >> (SLICE_HIGH_SHIFT - SLICE_LOW_SHIFT)) & 0x1 */ - rldicl r11,r10,(64 - (SLICE_HIGH_SHIFT - SLICE_LOW_SHIFT)),63 - b 6f - -5: - /* - * Handle lpsizes - * r9 is get_paca()->context.low_slices_psize[index], r11 is mask_index - */ - srdi r11,r10,1 /* index */ - addi r9,r11,PACALOWSLICESPSIZE - lbzx r9,r13,r9 /* r9 is lpsizes[r11] */ - rldicl r11,r10,0,63 /* r11 = r10 & 0x1 */ -6: - sldi r11,r11,2 /* index * 4 */ - /* Extract the psize and multiply to get an array offset */ - srd r9,r9,r11 - andi. r9,r9,0xf - mulli r9,r9,MMUPSIZEDEFSIZE - - /* Now get to the array and obtain the sllp - */ - ld r11,PACATOC(r13) - ld r11,mmu_psize_defs@got(r11) - add r11,r11,r9 - ld r11,MMUPSIZESLLP(r11) - ori r11,r11,SLB_VSID_USER -#else - /* paca context sllp already contains the SLB_VSID_USER bits */ - lhz r11,PACACONTEXTSLLP(r13) -#endif /* CONFIG_PPC_MM_SLICES */ - - ld r9,PACACONTEXTID(r13) -BEGIN_FTR_SECTION - cmpldi r10,0x1000 - bge .Lslb_finish_load_1T -END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) - b .Lslb_finish_load - -8: /* invalid EA - return an error indication */ - crset 4*cr0+eq /* indicate failure */ - blr - -/* - * Finish loading of an SLB entry and return - * - * r3 = EA, r9 = context, r10 = ESID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET - */ -.Lslb_finish_load: - rldimi r10,r9,ESID_BITS,0 - ASM_VSID_SCRAMBLE(r10,r9,r11,256M) - /* r3 = EA, r11 = VSID data */ - /* - * Find a slot, round robin. Previously we tried to find a - * free slot first but that took too long. Unfortunately we - * dont have any LRU information to help us choose a slot. - */ - - mr r9,r3 - - /* slb_finish_load_1T continues here. r9=EA with non-ESID bits clear */ -7: ld r10,PACASTABRR(r13) - addi r10,r10,1 - /* This gets soft patched on boot. */ -.globl slb_compare_rr_to_size -slb_compare_rr_to_size: - cmpldi r10,0 - - blt+ 4f - li r10,SLB_NUM_BOLTED - -4: - std r10,PACASTABRR(r13) - -3: - rldimi r9,r10,0,36 /* r9 = EA[0:35] | entry */ - oris r10,r9,SLB_ESID_V@h /* r10 = r9 | SLB_ESID_V */ - - /* r9 = ESID data, r11 = VSID data */ - - /* - * No need for an isync before or after this slbmte. The exception - * we enter with and the rfid we exit with are context synchronizing. - */ - slbmte r11,r10 - - /* we're done for kernel addresses */ - crclr 4*cr0+eq /* set result to "success" */ - bgelr cr7 - - /* Update the slb cache */ - lhz r9,PACASLBCACHEPTR(r13) /* offset = paca->slb_cache_ptr */ - cmpldi r9,SLB_CACHE_ENTRIES - bge 1f - - /* still room in the slb cache */ - sldi r11,r9,2 /* r11 = offset * sizeof(u32) */ - srdi r10,r10,28 /* get the 36 bits of the ESID */ - add r11,r11,r13 /* r11 = (u32 *)paca + offset */ - stw r10,PACASLBCACHE(r11) /* paca->slb_cache[offset] = esid */ - addi r9,r9,1 /* offset++ */ - b 2f -1: /* offset >= SLB_CACHE_ENTRIES */ - li r9,SLB_CACHE_ENTRIES+1 -2: - sth r9,PACASLBCACHEPTR(r13) /* paca->slb_cache_ptr = offset */ - crclr 4*cr0+eq /* set result to "success" */ - blr - -/* - * Finish loading of a 1T SLB entry (for the kernel linear mapping) and return. - * - * r3 = EA, r9 = context, r10 = ESID(256MB), r11 = flags, clobbers r9 - */ -.Lslb_finish_load_1T: - srdi r10,r10,(SID_SHIFT_1T - SID_SHIFT) /* get 1T ESID */ - rldimi r10,r9,ESID_BITS_1T,0 - ASM_VSID_SCRAMBLE(r10,r9,r11,1T) - - li r10,MMU_SEGSIZE_1T - rldimi r11,r10,SLB_VSID_SSIZE_SHIFT,0 /* insert segment size */ - - /* r3 = EA, r11 = VSID data */ - clrrdi r9,r3,SID_SHIFT_1T /* clear out non-ESID bits */ - b 7b - - -_ASM_NOKPROBE_SYMBOL(slb_allocate) -_ASM_NOKPROBE_SYMBOL(slb_miss_kernel_load_linear) -_ASM_NOKPROBE_SYMBOL(slb_miss_kernel_load_io) -_ASM_NOKPROBE_SYMBOL(slb_compare_rr_to_size) -#ifdef CONFIG_SPARSEMEM_VMEMMAP -_ASM_NOKPROBE_SYMBOL(slb_miss_kernel_load_vmemmap) -#endif |