summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/kbuild/Kconfig.recursion-issue-0157
-rw-r--r--Documentation/kbuild/Kconfig.recursion-issue-0263
-rw-r--r--Documentation/kbuild/Kconfig.select-break33
-rw-r--r--Documentation/kbuild/kconfig-language.txt161
-rw-r--r--scripts/kconfig/Makefile56
-rw-r--r--scripts/kconfig/expr.c2
-rwxr-xr-xscripts/kconfig/merge_config.sh18
-rw-r--r--scripts/kconfig/qconf.cc688
-rw-r--r--scripts/kconfig/qconf.h150
-rw-r--r--scripts/kconfig/symbol.c2
10 files changed, 794 insertions, 436 deletions
diff --git a/Documentation/kbuild/Kconfig.recursion-issue-01 b/Documentation/kbuild/Kconfig.recursion-issue-01
new file mode 100644
index 000000000000..e8877db0461f
--- /dev/null
+++ b/Documentation/kbuild/Kconfig.recursion-issue-01
@@ -0,0 +1,57 @@
+# Simple Kconfig recursive issue
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+#
+# Test with:
+#
+# make KBUILD_KCONFIG=Documentation/kbuild/Kconfig.recursion-issue-01 allnoconfig
+#
+# This Kconfig file has a simple recursive dependency issue. In order to
+# understand why this recursive dependency issue occurs lets consider what
+# Kconfig needs to address. We iterate over what Kconfig needs to address
+# by stepping through the questions it needs to address sequentially.
+#
+# * What values are possible for CORE?
+#
+# CORE_BELL_A_ADVANCED selects CORE, which means that it influences the values
+# that are possible for CORE. So for example if CORE_BELL_A_ADVANCED is 'y',
+# CORE must be 'y' too.
+#
+# * What influences CORE_BELL_A_ADVANCED ?
+#
+# As the name implies CORE_BELL_A_ADVANCED is an advanced feature of
+# CORE_BELL_A so naturally it depends on CORE_BELL_A. So if CORE_BELL_A is 'y'
+# we know CORE_BELL_A_ADVANCED can be 'y' too.
+#
+# * What influences CORE_BELL_A ?
+#
+# CORE_BELL_A depends on CORE, so CORE influences CORE_BELL_A.
+#
+# But that is a problem, because this means that in order to determine
+# what values are possible for CORE we ended up needing to address questions
+# regarding possible values of CORE itself again. Answering the original
+# question of what are the possible values of CORE would make the kconfig
+# tools run in a loop. When this happens Kconfig exits and complains about
+# the "recursive dependency detected" error.
+#
+# Reading the Documentation/kbuild/Kconfig.recursion-issue-01 file it may be
+# obvious that an easy to solution to this problem should just be the removal
+# of the "select CORE" from CORE_BELL_A_ADVANCED as that is implicit already
+# since CORE_BELL_A depends on CORE. Recursive dependency issues are not always
+# so trivial to resolve, we provide another example below of practical
+# implications of this recursive issue where the solution is perhaps not so
+# easy to understand. Note that matching semantics on the dependency on
+# CORE also consist of a solution to this recursive problem.
+
+mainmenu "Simple example to demo kconfig recursive dependency issue"
+
+config CORE
+ tristate
+
+config CORE_BELL_A
+ tristate
+ depends on CORE
+
+config CORE_BELL_A_ADVANCED
+ tristate
+ depends on CORE_BELL_A
+ select CORE
diff --git a/Documentation/kbuild/Kconfig.recursion-issue-02 b/Documentation/kbuild/Kconfig.recursion-issue-02
new file mode 100644
index 000000000000..b9fd56c4b57e
--- /dev/null
+++ b/Documentation/kbuild/Kconfig.recursion-issue-02
@@ -0,0 +1,63 @@
+# Cumulative Kconfig recursive issue
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+#
+# Test with:
+#
+# make KBUILD_KCONFIG=Documentation/kbuild/Kconfig.recursion-issue-02 allnoconfig
+#
+# The recursive limitations with Kconfig has some non intuitive implications on
+# kconfig sematics which are documented here. One known practical implication
+# of the recursive limitation is that drivers cannot negate features from other
+# drivers if they share a common core requirement and use disjoint semantics to
+# annotate those requirements, ie, some drivers use "depends on" while others
+# use "select". For instance it means if a driver A and driver B share the same
+# core requirement, and one uses "select" while the other uses "depends on" to
+# annotate this, all features that driver A selects cannot now be negated by
+# driver B.
+#
+# A perhaps not so obvious implication of this is that, if semantics on these
+# core requirements are not carefully synced, as drivers evolve features
+# they select or depend on end up becoming shared requirements which cannot be
+# negated by other drivers.
+#
+# The example provided in Documentation/kbuild/Kconfig.recursion-issue-02
+# describes a simple driver core layout of example features a kernel might
+# have. Let's assume we have some CORE functionality, then the kernel has a
+# series of bells and whistles it desires to implement, its not so advanced so
+# it only supports bells at this time: CORE_BELL_A and CORE_BELL_B. If
+# CORE_BELL_A has some advanced feature CORE_BELL_A_ADVANCED which selects
+# CORE_BELL_A then CORE_BELL_A ends up becoming a common BELL feature which
+# other bells in the system cannot negate. The reason for this issue is
+# due to the disjoint use of semantics on expressing each bell's relationship
+# with CORE, one uses "depends on" while the other uses "select". Another
+# more important reason is that kconfig does not check for dependencies listed
+# under 'select' for a symbol, when such symbols are selected kconfig them
+# as mandatory required symbols. For more details on the heavy handed nature
+# of select refer to Documentation/kbuild/Kconfig.select-break
+#
+# To fix this the "depends on CORE" must be changed to "select CORE", or the
+# "select CORE" must be changed to "depends on CORE".
+#
+# For an example real world scenario issue refer to the attempt to remove
+# "select FW_LOADER" [0], in the end the simple alternative solution to this
+# problem consisted on matching semantics with newly introduced features.
+#
+# [0] http://lkml.kernel.org/r/1432241149-8762-1-git-send-email-mcgrof@do-not-panic.com
+
+mainmenu "Simple example to demo cumulative kconfig recursive dependency implication"
+
+config CORE
+ tristate
+
+config CORE_BELL_A
+ tristate
+ depends on CORE
+
+config CORE_BELL_A_ADVANCED
+ tristate
+ select CORE_BELL_A
+
+config CORE_BELL_B
+ tristate
+ depends on !CORE_BELL_A
+ select CORE
diff --git a/Documentation/kbuild/Kconfig.select-break b/Documentation/kbuild/Kconfig.select-break
new file mode 100644
index 000000000000..365ceb3424b1
--- /dev/null
+++ b/Documentation/kbuild/Kconfig.select-break
@@ -0,0 +1,33 @@
+# Select broken dependency issue
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+#
+# Test with:
+#
+# make KBUILD_KCONFIG=Documentation/kbuild/Kconfig.select-break menuconfig
+#
+# kconfig will not complain and enable this layout for configuration. This is
+# currently a feature of kconfig, given select was designed to be heavy handed.
+# Kconfig currently does not check the list of symbols listed on a symbol's
+# "select" list, this is done on purpose to help load a set of known required
+# symbols. Because of this use of select should be used with caution. An
+# example of this issue is below.
+#
+# The option B and C are clearly contradicting with respect to A.
+# However, when A is set, C can be set as well because Kconfig does not
+# visit the dependencies of the select target (in this case B). And since
+# Kconfig does not visit the dependencies, it breaks the dependencies of B
+# (!A).
+
+mainmenu "Simple example to demo kconfig select broken dependency issue"
+
+config A
+ bool "CONFIG A"
+
+config B
+ bool "CONFIG B"
+ depends on !A
+
+config C
+ bool "CONFIG C"
+ depends on A
+ select B
diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt
index 350f733bf2c7..c52856da0cad 100644
--- a/Documentation/kbuild/kconfig-language.txt
+++ b/Documentation/kbuild/kconfig-language.txt
@@ -393,3 +393,164 @@ config FOO
depends on BAR && m
limits FOO to module (=m) or disabled (=n).
+
+Kconfig recursive dependency limitations
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+If you've hit the Kconfig error: "recursive dependency detected" you've run
+into a recursive dependency issue with Kconfig, a recursive dependency can be
+summarized as a circular dependency. The kconfig tools need to ensure that
+Kconfig files comply with specified configuration requirements. In order to do
+that kconfig must determine the values that are possible for all Kconfig
+symbols, this is currently not possible if there is a circular relation
+between two or more Kconfig symbols. For more details refer to the "Simple
+Kconfig recursive issue" subsection below. Kconfig does not do recursive
+dependency resolution; this has a few implications for Kconfig file writers.
+We'll first explain why this issues exists and then provide an example
+technical limitation which this brings upon Kconfig developers. Eager
+developers wishing to try to address this limitation should read the next
+subsections.
+
+Simple Kconfig recursive issue
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Read: Documentation/kbuild/Kconfig.recursion-issue-01
+
+Test with:
+
+make KBUILD_KCONFIG=Documentation/kbuild/Kconfig.recursion-issue-01 allnoconfig
+
+Cumulative Kconfig recursive issue
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Read: Documentation/kbuild/Kconfig.recursion-issue-02
+
+Test with:
+
+make KBUILD_KCONFIG=Documentation/kbuild/Kconfig.recursion-issue-02 allnoconfig
+
+Practical solutions to kconfig recursive issue
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Developers who run into the recursive Kconfig issue have three options
+at their disposal. We document them below and also provide a list of
+historical issues resolved through these different solutions.
+
+ a) Remove any superfluous "select FOO" or "depends on FOO"
+ b) Match dependency semantics:
+ b1) Swap all "select FOO" to "depends on FOO" or,
+ b2) Swap all "depends on FOO" to "select FOO"
+
+The resolution to a) can be tested with the sample Kconfig file
+Documentation/kbuild/Kconfig.recursion-issue-01 through the removal
+of the "select CORE" from CORE_BELL_A_ADVANCED as that is implicit already
+since CORE_BELL_A depends on CORE. At times it may not be possible to remove
+some dependency criteria, for such cases you can work with solution b).
+
+The two different resolutions for b) can be tested in the sample Kconfig file
+Documentation/kbuild/Kconfig.recursion-issue-02.
+
+Below is a list of examples of prior fixes for these types of recursive issues;
+all errors appear to involve one or more select's and one or more "depends on".
+
+commit fix
+====== ===
+06b718c01208 select A -> depends on A
+c22eacfe82f9 depends on A -> depends on B
+6a91e854442c select A -> depends on A
+118c565a8f2e select A -> select B
+f004e5594705 select A -> depends on A
+c7861f37b4c6 depends on A -> (null)
+80c69915e5fb select A -> (null) (1)
+c2218e26c0d0 select A -> depends on A (1)
+d6ae99d04e1c select A -> depends on A
+95ca19cf8cbf select A -> depends on A
+8f057d7bca54 depends on A -> (null)
+8f057d7bca54 depends on A -> select A
+a0701f04846e select A -> depends on A
+0c8b92f7f259 depends on A -> (null)
+e4e9e0540928 select A -> depends on A (2)
+7453ea886e87 depends on A > (null) (1)
+7b1fff7e4fdf select A -> depends on A
+86c747d2a4f0 select A -> depends on A
+d9f9ab51e55e select A -> depends on A
+0c51a4d8abd6 depends on A -> select A (3)
+e98062ed6dc4 select A -> depends on A (3)
+91e5d284a7f1 select A -> (null)
+
+(1) Partial (or no) quote of error.
+(2) That seems to be the gist of that fix.
+(3) Same error.
+
+Future kconfig work
+~~~~~~~~~~~~~~~~~~~
+
+Work on kconfig is welcomed on both areas of clarifying semantics and on
+evaluating the use of a full SAT solver for it. A full SAT solver can be
+desirable to enable more complex dependency mappings and / or queries,
+for instance on possible use case for a SAT solver could be that of handling
+the current known recursive dependency issues. It is not known if this would
+address such issues but such evaluation is desirable. If support for a full SAT
+solver proves too complex or that it cannot address recursive dependency issues
+Kconfig should have at least clear and well defined semantics which also
+addresses and documents limitations or requirements such as the ones dealing
+with recursive dependencies.
+
+Further work on both of these areas is welcomed on Kconfig. We elaborate
+on both of these in the next two subsections.
+
+Semantics of Kconfig
+~~~~~~~~~~~~~~~~~~~~
+
+The use of Kconfig is broad, Linux is now only one of Kconfig's users:
+one study has completed a broad analysis of Kconfig use in 12 projects [0].
+Despite its widespread use, and although this document does a reasonable job
+in documenting basic Kconfig syntax a more precise definition of Kconfig
+semantics is welcomed. One project deduced Kconfig semantics through
+the use of the xconfig configurator [1]. Work should be done to confirm if
+the deduced semantics matches our intended Kconfig design goals.
+
+Having well defined semantics can be useful for tools for practical
+evaluation of depenencies, for instance one such use known case was work to
+express in boolean abstraction of the inferred semantics of Kconfig to
+translate Kconfig logic into boolean formulas and run a SAT solver on this to
+find dead code / features (always inactive), 114 dead features were found in
+Linux using this methodology [1] (Section 8: Threats to validity).
+
+Confirming this could prove useful as Kconfig stands as one of the the leading
+industrial variability modeling languages [1] [2]. Its study would help
+evaluate practical uses of such languages, their use was only theoretical
+and real world requirements were not well understood. As it stands though
+only reverse engineering techniques have been used to deduce semantics from
+variability modeling languages such as Kconfig [3].
+
+[0] http://www.eng.uwaterloo.ca/~shshe/kconfig_semantics.pdf
+[1] http://gsd.uwaterloo.ca/sites/default/files/vm-2013-berger.pdf
+[2] http://gsd.uwaterloo.ca/sites/default/files/ase241-berger_0.pdf
+[3] http://gsd.uwaterloo.ca/sites/default/files/icse2011.pdf
+
+Full SAT solver for Kconfig
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Although SAT solvers [0] haven't yet been used by Kconfig directly, as noted in
+the previous subsection, work has been done however to express in boolean
+abstraction the inferred semantics of Kconfig to translate Kconfig logic into
+boolean formulas and run a SAT solver on it [1]. Another known related project
+is CADOS [2] (former VAMOS [3]) and the tools, mainly undertaker [4], which has
+been introduced first with [5]. The basic concept of undertaker is to exract
+variability models from Kconfig, and put them together with a propositional
+formula extracted from CPP #ifdefs and build-rules into a SAT solver in order
+to find dead code, dead files, and dead symbols. If using a SAT solver is
+desirable on Kconfig one approach would be to evaluate repurposing such efforts
+somehow on Kconfig. There is enough interest from mentors of existing projects
+to not only help advise how to integrate this work upstream but also help
+maintain it long term. Interested developers should visit:
+
+http://kernelnewbies.org/KernelProjects/kconfig-sat
+
+[0] http://www.cs.cornell.edu/~sabhar/chapters/SATSolvers-KR-Handbook.pdf
+[1] http://gsd.uwaterloo.ca/sites/default/files/vm-2013-berger.pdf
+[2] https://cados.cs.fau.de
+[3] https://vamos.cs.fau.de
+[4] https://undertaker.cs.fau.de
+[5] https://www4.cs.fau.de/Publications/2011/tartler_11_eurosys.pdf
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index 3043d6b0b51d..d79cba4ce3eb 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -229,49 +229,21 @@ $(obj)/.tmp_qtcheck: $(src)/Makefile
# Qt needs some extra effort...
$(obj)/.tmp_qtcheck:
- @set -e; $(kecho) " CHECK qt"; dir=""; pkg=""; \
- if ! pkg-config --exists QtCore 2> /dev/null; then \
- echo "* Unable to find the Qt4 tool qmake. Trying to use Qt3"; \
- pkg-config --exists qt 2> /dev/null && pkg=qt; \
- pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \
- if [ -n "$$pkg" ]; then \
- cflags="\$$(shell pkg-config $$pkg --cflags)"; \
- libs="\$$(shell pkg-config $$pkg --libs)"; \
- moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \
- dir="$$(pkg-config $$pkg --variable=prefix)"; \
- else \
- for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \
- if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \
- done; \
- if [ -z "$$dir" ]; then \
- echo >&2 "*"; \
- echo >&2 "* Unable to find any Qt installation. Please make sure that"; \
- echo >&2 "* the Qt4 or Qt3 development package is correctly installed and"; \
- echo >&2 "* either qmake can be found or install pkg-config or set"; \
- echo >&2 "* the QTDIR environment variable to the correct location."; \
- echo >&2 "*"; \
- false; \
- fi; \
- libpath=$$dir/lib; lib=qt; osdir=""; \
- $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \
- osdir=x$$($(HOSTCXX) -print-multi-os-directory); \
- test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \
- test -f $$libpath/libqt-mt.so && lib=qt-mt; \
- cflags="-I$$dir/include"; \
- libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \
- moc="$$dir/bin/moc"; \
- fi; \
- if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \
- echo "*"; \
- echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \
- echo "*"; \
- moc="/usr/bin/moc"; \
- fi; \
+ @set -e; $(kecho) " CHECK qt"; \
+ if pkg-config --exists Qt5Core; then \
+ cflags="-std=c++11 -fPIC `pkg-config --cflags Qt5Core Qt5Gui Qt5Widgets`"; \
+ libs=`pkg-config --libs Qt5Core Qt5Gui Qt5Widgets`; \
+ moc=`pkg-config --variable=host_bins Qt5Core`/moc; \
+ elif pkg-config --exists QtCore; then \
+ cflags=`pkg-config --cflags QtCore QtGui`; \
+ libs=`pkg-config --libs QtCore QtGui`; \
+ moc=`pkg-config --variable=moc_location QtCore`; \
else \
- cflags="\$$(shell pkg-config QtCore QtGui Qt3Support --cflags)"; \
- libs="\$$(shell pkg-config QtCore QtGui Qt3Support --libs)"; \
- moc="\$$(shell pkg-config QtCore --variable=moc_location)"; \
- [ -n "$$moc" ] || moc="\$$(shell pkg-config QtCore --variable=prefix)/bin/moc"; \
+ echo >&2 "*"; \
+ echo >&2 "* Could not find Qt via pkg-config."; \
+ echo >&2 "* Please install either Qt 4.8 or 5.x. and make sure it's in PKG_CONFIG_PATH"; \
+ echo >&2 "*"; \
+ exit 1; \
fi; \
echo "KC_QT_CFLAGS=$$cflags" > $@; \
echo "KC_QT_LIBS=$$libs" >> $@; \
diff --git a/scripts/kconfig/expr.c b/scripts/kconfig/expr.c
index 667d1aa23711..cbf4996dd9c1 100644
--- a/scripts/kconfig/expr.c
+++ b/scripts/kconfig/expr.c
@@ -1113,7 +1113,7 @@ void expr_print(struct expr *e, void (*fn)(void *, struct symbol *, const char *
fn(data, e->left.sym, e->left.sym->name);
else
fn(data, NULL, "<choice>");
- fn(data, NULL, e->type == E_LEQ ? ">=" : ">");
+ fn(data, NULL, e->type == E_GEQ ? ">=" : ">");
fn(data, e->right.sym, e->right.sym->name);
break;
case E_UNEQUAL:
diff --git a/scripts/kconfig/merge_config.sh b/scripts/kconfig/merge_config.sh
index 0d883b37882a..67d131447631 100755
--- a/scripts/kconfig/merge_config.sh
+++ b/scripts/kconfig/merge_config.sh
@@ -32,7 +32,7 @@ usage() {
echo " -m only merge the fragments, do not execute the make command"
echo " -n use allnoconfig instead of alldefconfig"
echo " -r list redundant entries when merging fragments"
- echo " -O dir to put generated output files"
+ echo " -O dir to put generated output files. Consider setting \$KCONFIG_CONFIG instead."
}
RUNMAKE=true
@@ -77,11 +77,19 @@ while true; do
esac
done
-if [ "$#" -lt 2 ] ; then
+if [ "$#" -lt 1 ] ; then
usage
exit
fi
+if [ -z "$KCONFIG_CONFIG" ]; then
+ if [ "$OUTPUT" != . ]; then
+ KCONFIG_CONFIG=$(readlink -m -- "$OUTPUT/.config")
+ else
+ KCONFIG_CONFIG=.config
+ fi
+fi
+
INITFILE=$1
shift;
@@ -124,9 +132,9 @@ for MERGE_FILE in $MERGE_LIST ; do
done
if [ "$RUNMAKE" = "false" ]; then
- cp $TMP_FILE $OUTPUT/.config
+ cp -T -- "$TMP_FILE" "$KCONFIG_CONFIG"
echo "#"
- echo "# merged configuration written to $OUTPUT/.config (needs make)"
+ echo "# merged configuration written to $KCONFIG_CONFIG (needs make)"
echo "#"
clean_up
exit
@@ -150,7 +158,7 @@ make KCONFIG_ALLCONFIG=$TMP_FILE $OUTPUT_ARG $ALLTARGET
for CFG in $(sed -n "$SED_CONFIG_EXP" $TMP_FILE); do
REQUESTED_VAL=$(grep -w -e "$CFG" $TMP_FILE)
- ACTUAL_VAL=$(grep -w -e "$CFG" $OUTPUT/.config)
+ ACTUAL_VAL=$(grep -w -e "$CFG" "$KCONFIG_CONFIG")
if [ "x$REQUESTED_VAL" != "x$ACTUAL_VAL" ] ; then
echo "Value requested for $CFG not in final .config"
echo "Requested value: $REQUESTED_VAL"
diff --git a/scripts/kconfig/qconf.cc b/scripts/kconfig/qconf.cc
index c3bb7fe8dfa6..91b7e6fbc364 100644
--- a/scripts/kconfig/qconf.cc
+++ b/scripts/kconfig/qconf.cc
@@ -1,32 +1,17 @@
/*
* Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>
+ * Copyright (C) 2015 Boris Barbulovski <bbarbulovski@gmail.com>
* Released under the terms of the GNU GPL v2.0.
*/
#include <qglobal.h>
-#if QT_VERSION < 0x040000
-#include <stddef.h>
-#include <qmainwindow.h>
-#include <qvbox.h>
-#include <qvaluelist.h>
+#include <QMainWindow>
+#include <QList>
#include <qtextbrowser.h>
-#include <qaction.h>
-#include <qheader.h>
-#include <qfiledialog.h>
-#include <qdragobject.h>
-#include <qpopupmenu.h>
-#else
-#include <q3mainwindow.h>
-#include <q3vbox.h>
-#include <q3valuelist.h>
-#include <q3textbrowser.h>
-#include <q3action.h>
-#include <q3header.h>
-#include <q3filedialog.h>
-#include <q3dragobject.h>
-#include <q3popupmenu.h>
-#endif
+#include <QAction>
+#include <QFileDialog>
+#include <QMenu>
#include <qapplication.h>
#include <qdesktopwidget.h>
@@ -57,7 +42,7 @@
static QApplication *configApp;
static ConfigSettings *configSettings;
-Q3Action *ConfigMainWindow::saveAction;
+QAction *ConfigMainWindow::saveAction;
static inline QString qgettext(const char* str)
{
@@ -66,7 +51,7 @@ static inline QString qgettext(const char* str)
static inline QString qgettext(const QString& str)
{
- return QString::fromLocal8Bit(gettext(str.latin1()));
+ return QString::fromLocal8Bit(gettext(str.toLatin1()));
}
ConfigSettings::ConfigSettings()
@@ -77,10 +62,10 @@ ConfigSettings::ConfigSettings()
/**
* Reads a list of integer values from the application settings.
*/
-Q3ValueList<int> ConfigSettings::readSizes(const QString& key, bool *ok)
+QList<int> ConfigSettings::readSizes(const QString& key, bool *ok)
{
- Q3ValueList<int> result;
- QStringList entryList = readListEntry(key, ok);
+ QList<int> result;
+ QStringList entryList = value(key).toStringList();
QStringList::Iterator it;
for (it = entryList.begin(); it != entryList.end(); ++it)
@@ -92,14 +77,16 @@ Q3ValueList<int> ConfigSettings::readSizes(const QString& key, bool *ok)
/**
* Writes a list of integer values to the application settings.
*/
-bool ConfigSettings::writeSizes(const QString& key, const Q3ValueList<int>& value)
+bool ConfigSettings::writeSizes(const QString& key, const QList<int>& value)
{
QStringList stringList;
- Q3ValueList<int>::ConstIterator it;
+ QList<int>::ConstIterator it;
for (it = value.begin(); it != value.end(); ++it)
stringList.push_back(QString::number(*it));
- return writeEntry(key, stringList);
+ setValue(key, stringList);
+
+ return true;
}
@@ -109,9 +96,6 @@ bool ConfigSettings::writeSizes(const QString& key, const Q3ValueList<int>& valu
*/
void ConfigItem::okRename(int col)
{
- Parent::okRename(col);
- sym_set_string_value(menu->sym, text(dataColIdx).latin1());
- listView()->updateList(this);
}
/*
@@ -149,11 +133,11 @@ void ConfigItem::updateMenu(void)
} else {
if (sym)
break;
- setPixmap(promptColIdx, 0);
+ setPixmap(promptColIdx, QIcon());
}
goto set_prompt;
case P_COMMENT:
- setPixmap(promptColIdx, 0);
+ setPixmap(promptColIdx, QIcon());
goto set_prompt;
default:
;
@@ -170,7 +154,7 @@ void ConfigItem::updateMenu(void)
char ch;
if (!sym_is_changable(sym) && list->optMode == normalOpt) {
- setPixmap(promptColIdx, 0);
+ setPixmap(promptColIdx, QIcon());
setText(noColIdx, QString::null);
setText(modColIdx, QString::null);
setText(yesColIdx, QString::null);
@@ -216,9 +200,6 @@ void ConfigItem::updateMenu(void)
data = sym_get_string_value(sym);
- int i = list->mapIdx(dataColIdx);
- if (i >= 0)
- setRenameEnabled(i, TRUE);
setText(dataColIdx, data);
if (type == S_STRING)
prompt = QString("%1: %2").arg(prompt).arg(data);
@@ -250,18 +231,6 @@ void ConfigItem::testUpdateMenu(bool v)
updateMenu();
}
-void ConfigItem::paintCell(QPainter* p, const QColorGroup& cg, int column, int width, int align)
-{
- ConfigList* list = listView();
-
- if (visible) {
- if (isSelected() && !list->hasFocus() && list->mode == menuMode)
- Parent::paintCell(p, list->inactivedColorGroup, column, width, align);
- else
- Parent::paintCell(p, cg, column, width, align);
- } else
- Parent::paintCell(p, list->disabledColorGroup, column, width, align);
-}
/*
* construct a menu entry
@@ -274,7 +243,7 @@ void ConfigItem::init(void)
menu->data = this;
if (list->mode != fullMode)
- setOpen(TRUE);
+ setExpanded(true);
sym_calc_value(menu->sym);
}
updateMenu();
@@ -299,7 +268,7 @@ ConfigItem::~ConfigItem(void)
ConfigLineEdit::ConfigLineEdit(ConfigView* parent)
: Parent(parent)
{
- connect(this, SIGNAL(lostFocus()), SLOT(hide()));
+ connect(this, SIGNAL(editingFinished()), SLOT(hide()));
}
void ConfigLineEdit::show(ConfigItem* i)
@@ -320,7 +289,7 @@ void ConfigLineEdit::keyPressEvent(QKeyEvent* e)
break;
case Qt::Key_Return:
case Qt::Key_Enter:
- sym_set_string_value(item->menu->sym, text().latin1());
+ sym_set_string_value(item->menu->sym, text().toLatin1());
parent()->updateList(item);
break;
default:
@@ -333,39 +302,39 @@ void ConfigLineEdit::keyPressEvent(QKeyEvent* e)
}
ConfigList::ConfigList(ConfigView* p, const char *name)
- : Parent(p, name),
+ : Parent(p),
updateAll(false),
symbolYesPix(xpm_symbol_yes), symbolModPix(xpm_symbol_mod), symbolNoPix(xpm_symbol_no),
choiceYesPix(xpm_choice_yes), choiceNoPix(xpm_choice_no),
menuPix(xpm_menu), menuInvPix(xpm_menu_inv), menuBackPix(xpm_menuback), voidPix(xpm_void),
- showName(false), showRange(false), showData(false), optMode(normalOpt),
+ showName(false), showRange(false), showData(false), mode(singleMode), optMode(normalOpt),
rootEntry(0), headerPopup(0)
{
int i;
- setSorting(-1);
- setRootIsDecorated(TRUE);
- disabledColorGroup = palette().active();
- disabledColorGroup.setColor(QColorGroup::Text, palette().disabled().text());
- inactivedColorGroup = palette().active();
- inactivedColorGroup.setColor(QColorGroup::Highlight, palette().disabled().highlight());
+ setObjectName(name);
+ setSortingEnabled(false);
+ setRootIsDecorated(true);
+
+ setVerticalScrollMode(ScrollPerPixel);
+ setHorizontalScrollMode(ScrollPerPixel);
+
+ setHeaderLabels(QStringList() << _("Option") << _("Name") << "N" << "M" << "Y" << _("Value"));
- connect(this, SIGNAL(selectionChanged(void)),
+ connect(this, SIGNAL(itemSelectionChanged(void)),
SLOT(updateSelection(void)));
if (name) {
configSettings->beginGroup(name);
- showName = configSettings->readBoolEntry("/showName", false);
- showRange = configSettings->readBoolEntry("/showRange", false);
- showData = configSettings->readBoolEntry("/showData", false);
- optMode = (enum optionMode)configSettings->readNumEntry("/optionMode", false);
+ showName = configSettings->value("/showName", false).toBool();
+ showRange = configSettings->value("/showRange", false).toBool();
+ showData = configSettings->value("/showData", false).toBool();
+ optMode = (enum optionMode)configSettings->value("/optionMode", 0).toInt();
configSettings->endGroup();
connect(configApp, SIGNAL(aboutToQuit()), SLOT(saveSettings()));
}
- for (i = 0; i < colNr; i++)
- colMap[i] = colRevMap[i] = -1;
- addColumn(promptColIdx, _("Option"));
+ addColumn(promptColIdx);
reinit();
}
@@ -390,26 +359,26 @@ void ConfigList::reinit(void)
removeColumn(nameColIdx);
if (showName)
- addColumn(nameColIdx, _("Name"));
+ addColumn(nameColIdx);
if (showRange) {
- addColumn(noColIdx, "N");
- addColumn(modColIdx, "M");
- addColumn(yesColIdx, "Y");
+ addColumn(noColIdx);
+ addColumn(modColIdx);
+ addColumn(yesColIdx);
}
if (showData)
- addColumn(dataColIdx, _("Value"));
+ addColumn(dataColIdx);
updateListAll();
}
void ConfigList::saveSettings(void)
{
- if (name()) {
- configSettings->beginGroup(name());
- configSettings->writeEntry("/showName", showName);
- configSettings->writeEntry("/showRange", showRange);
- configSettings->writeEntry("/showData", showData);
- configSettings->writeEntry("/optionMode", (int)optMode);
+ if (!objectName().isEmpty()) {
+ configSettings->beginGroup(objectName());
+ configSettings->setValue("/showName", showName);
+ configSettings->setValue("/showRange", showRange);
+ configSettings->setValue("/showData", showData);
+ configSettings->setValue("/optionMode", (int)optMode);
configSettings->endGroup();
}
}
@@ -431,7 +400,10 @@ void ConfigList::updateSelection(void)
struct menu *menu;
enum prop_type type;
- ConfigItem* item = (ConfigItem*)selectedItem();
+ if (selectedItems().count() == 0)
+ return;
+
+ ConfigItem* item = (ConfigItem*)selectedItems().first();
if (!item)
return;
@@ -451,21 +423,23 @@ void ConfigList::updateList(ConfigItem* item)
if (!rootEntry) {
if (mode != listMode)
goto update;
- Q3ListViewItemIterator it(this);
+ QTreeWidgetItemIterator it(this);
ConfigItem* item;
- for (; it.current(); ++it) {
- item = (ConfigItem*)it.current();
+ while (*it) {
+ item = (ConfigItem*)(*it);
if (!item->menu)
continue;
item->testUpdateMenu(menu_is_visible(item->menu));
+
+ ++it;
}
return;
}
if (rootEntry != &rootmenu && (mode == singleMode ||
(mode == symbolMode && rootEntry->parent != &rootmenu))) {
- item = firstChild();
+ item = (ConfigItem *)topLevelItem(0);
if (!item)
item = new ConfigItem(this, 0, true);
last = item;
@@ -479,12 +453,14 @@ void ConfigList::updateList(ConfigItem* item)
item->testUpdateMenu(true);
updateMenuList(item, rootEntry);
- triggerUpdate();
+ update();
+ resizeColumnToContents(0);
return;
}
update:
updateMenuList(this, rootEntry);
- triggerUpdate();
+ update();
+ resizeColumnToContents(0);
}
void ConfigList::setValue(ConfigItem* item, tristate val)
@@ -506,7 +482,7 @@ void ConfigList::setValue(ConfigItem* item, tristate val)
if (!sym_set_tristate_value(sym, val))
return;
if (oldval == no && item->menu->list)
- item->setOpen(TRUE);
+ item->setExpanded(true);
parent()->updateList(item);
break;
}
@@ -524,7 +500,7 @@ void ConfigList::changeValue(ConfigItem* item)
sym = menu->sym;
if (!sym) {
if (item->menu->list)
- item->setOpen(!item->isOpen());
+ item->setExpanded(!item->isExpanded());
return;
}
@@ -536,9 +512,9 @@ void ConfigList::changeValue(ConfigItem* item)
newexpr = sym_toggle_tristate_value(sym);
if (item->menu->list) {
if (oldexpr == newexpr)
- item->setOpen(!item->isOpen());
+ item->setExpanded(!item->isExpanded());
else if (oldexpr == no)
- item->setOpen(TRUE);
+ item->setExpanded(true);
}
if (oldexpr != newexpr)
parent()->updateList(item);
@@ -546,10 +522,7 @@ void ConfigList::changeValue(ConfigItem* item)
case S_INT:
case S_HEX:
case S_STRING:
- if (colMap[dataColIdx] >= 0)
- item->startRename(colMap[dataColIdx]);
- else
- parent()->lineEdit->show(item);
+ parent()->lineEdit->show(item);
break;
}
}
@@ -566,8 +539,10 @@ void ConfigList::setRootMenu(struct menu *menu)
updateMenuList(this, 0);
rootEntry = menu;
updateListAll();
- setSelected(currentItem(), hasFocus());
- ensureItemVisible(currentItem());
+ if (currentItem()) {
+ currentItem()->setSelected(hasFocus());
+ scrollToItem(currentItem());
+ }
}
void ConfigList::setParentMenu(void)
@@ -580,13 +555,16 @@ void ConfigList::setParentMenu(void)
return;
setRootMenu(menu_get_parent_menu(rootEntry->parent));
- Q3ListViewItemIterator it(this);
- for (; (item = (ConfigItem*)it.current()); it++) {
+ QTreeWidgetItemIterator it(this);
+ while (*it) {
+ item = (ConfigItem *)(*it);
if (item->menu == oldroot) {
setCurrentItem(item);
- ensureItemVisible(item);
+ scrollToItem(item);
break;
}
+
+ ++it;
}
}
@@ -597,8 +575,7 @@ void ConfigList::setParentMenu(void)
* parent: either the menu list widget or a menu entry widget
* menu: entry to be updated
*/
-template <class P>
-void ConfigList::updateMenuList(P* parent, struct menu* menu)
+void ConfigList::updateMenuList(ConfigItem *parent, struct menu* menu)
{
struct menu* child;
ConfigItem* item;
@@ -607,8 +584,11 @@ void ConfigList::updateMenuList(P* parent, struct menu* menu)
enum prop_type type;
if (!menu) {
- while ((item = parent->firstChild()))
- delete item;
+ while (parent->childCount() > 0)
+ {
+ delete parent->takeChild(0);
+ }
+
return;
}
@@ -660,9 +640,74 @@ void ConfigList::updateMenuList(P* parent, struct menu* menu)
}
}
+void ConfigList::updateMenuList(ConfigList *parent, struct menu* menu)
+{
+ struct menu* child;
+ ConfigItem* item;
+ ConfigItem* last;
+ bool visible;
+ enum prop_type type;
+
+ if (!menu) {
+ while (parent->topLevelItemCount() > 0)
+ {
+ delete parent->takeTopLevelItem(0);
+ }
+
+ return;
+ }
+
+ last = (ConfigItem*)parent->topLevelItem(0);
+ if (last && !last->goParent)
+ last = 0;
+ for (child = menu->list; child; child = child->next) {
+ item = last ? last->nextSibling() : (ConfigItem*)parent->topLevelItem(0);
+ type = child->prompt ? child->prompt->type : P_UNKNOWN;
+
+ switch (mode) {
+ case menuMode:
+ if (!(child->flags & MENU_ROOT))
+ goto hide;
+ break;
+ case symbolMode:
+ if (child->flags & MENU_ROOT)
+ goto hide;
+ break;
+ default:
+ break;
+ }
+
+ visible = menu_is_visible(child);
+ if (!menuSkip(child)) {
+ if (!child->sym && !child->list && !child->prompt)
+ continue;
+ if (!item || item->menu != child)
+ item = new ConfigItem(parent, last, child, visible);
+ else
+ item->testUpdateMenu(visible);
+
+ if (mode == fullMode || mode == menuMode || type != P_MENU)
+ updateMenuList(item, child);
+ else
+ updateMenuList(item, 0);
+ last = item;
+ continue;
+ }
+ hide:
+ if (item && item->menu == child) {
+ last = (ConfigItem*)parent->topLevelItem(0);
+ if (last == item)
+ last = 0;
+ else while (last->nextSibling() != item)
+ last = last->nextSibling();
+ delete item;
+ }
+ }
+}
+
void ConfigList::keyPressEvent(QKeyEvent* ev)
{
- Q3ListViewItem* i = currentItem();
+ QTreeWidgetItem* i = currentItem();
ConfigItem* item;
struct menu *menu;
enum prop_type type;
@@ -714,20 +759,20 @@ void ConfigList::keyPressEvent(QKeyEvent* ev)
ev->accept();
}
-void ConfigList::contentsMousePressEvent(QMouseEvent* e)
+void ConfigList::mousePressEvent(QMouseEvent* e)
{
//QPoint p(contentsToViewport(e->pos()));
//printf("contentsMousePressEvent: %d,%d\n", p.x(), p.y());
- Parent::contentsMousePressEvent(e);
+ Parent::mousePressEvent(e);
}
-void ConfigList::contentsMouseReleaseEvent(QMouseEvent* e)
+void ConfigList::mouseReleaseEvent(QMouseEvent* e)
{
- QPoint p(contentsToViewport(e->pos()));
+ QPoint p = e->pos();
ConfigItem* item = (ConfigItem*)itemAt(p);
struct menu *menu;
enum prop_type ptype;
- const QPixmap* pm;
+ QIcon icon;
int idx, x;
if (!item)
@@ -735,14 +780,13 @@ void ConfigList::contentsMouseReleaseEvent(QMouseEvent* e)
menu = item->menu;
x = header()->offset() + p.x();
- idx = colRevMap[header()->sectionAt(x)];
+ idx = header()->logicalIndexAt(x);
switch (idx) {
case promptColIdx:
- pm = item->pixmap(promptColIdx);
- if (pm) {
- int off = header()->sectionPos(0) + itemMargin() +
- treeStepSize() * (item->depth() + (rootIsDecorated() ? 1 : 0));
- if (x >= off && x < off + pm->width()) {
+ icon = item->pixmap(promptColIdx);
+ if (!icon.isNull()) {
+ int off = header()->sectionPosition(0) + visualRect(indexAt(p)).x() + 4; // 4 is Hardcoded image offset. There might be a way to do it properly.
+ if (x >= off && x < off + icon.availableSizes().first().width()) {
if (item->goParent) {
emit parentSelected();
break;
@@ -773,19 +817,19 @@ void ConfigList::contentsMouseReleaseEvent(QMouseEvent* e)
skip:
//printf("contentsMouseReleaseEvent: %d,%d\n", p.x(), p.y());
- Parent::contentsMouseReleaseEvent(e);
+ Parent::mouseReleaseEvent(e);
}
-void ConfigList::contentsMouseMoveEvent(QMouseEvent* e)
+void ConfigList::mouseMoveEvent(QMouseEvent* e)
{
//QPoint p(contentsToViewport(e->pos()));
//printf("contentsMouseMoveEvent: %d,%d\n", p.x(), p.y());
- Parent::contentsMouseMoveEvent(e);
+ Parent::mouseMoveEvent(e);
}
-void ConfigList::contentsMouseDoubleClickEvent(QMouseEvent* e)
+void ConfigList::mouseDoubleClickEvent(QMouseEvent* e)
{
- QPoint p(contentsToViewport(e->pos()));
+ QPoint p = e->pos(); // TODO: Check if this works(was contentsToViewport).
ConfigItem* item = (ConfigItem*)itemAt(p);
struct menu *menu;
enum prop_type ptype;
@@ -807,7 +851,7 @@ void ConfigList::contentsMouseDoubleClickEvent(QMouseEvent* e)
skip:
//printf("contentsMouseDoubleClickEvent: %d,%d\n", p.x(), p.y());
- Parent::contentsMouseDoubleClickEvent(e);
+ Parent::mouseDoubleClickEvent(e);
}
void ConfigList::focusInEvent(QFocusEvent *e)
@@ -818,7 +862,7 @@ void ConfigList::focusInEvent(QFocusEvent *e)
ConfigItem* item = (ConfigItem *)currentItem();
if (item) {
- setSelected(item, TRUE);
+ item->setSelected(true);
menu = item->menu;
}
emit gotFocus(menu);
@@ -828,33 +872,33 @@ void ConfigList::contextMenuEvent(QContextMenuEvent *e)
{
if (e->y() <= header()->geometry().bottom()) {
if (!headerPopup) {
- Q3Action *action;
+ QAction *action;
- headerPopup = new Q3PopupMenu(this);
- action = new Q3Action(NULL, _("Show Name"), 0, this);
- action->setToggleAction(TRUE);
+ headerPopup = new QMenu(this);
+ action = new QAction(_("Show Name"), this);
+ action->setCheckable(true);
connect(action, SIGNAL(toggled(bool)),
parent(), SLOT(setShowName(bool)));
connect(parent(), SIGNAL(showNameChanged(bool)),
action, SLOT(setOn(bool)));
- action->setOn(showName);
- action->addTo(headerPopup);
- action = new Q3Action(NULL, _("Show Range"), 0, this);
- action->setToggleAction(TRUE);
+ action->setChecked(showName);
+ headerPopup->addAction(action);
+ action = new QAction(_("Show Range"), this);
+ action->setCheckable(true);
connect(action, SIGNAL(toggled(bool)),
parent(), SLOT(setShowRange(bool)));
connect(parent(), SIGNAL(showRangeChanged(bool)),
action, SLOT(setOn(bool)));
- action->setOn(showRange);
- action->addTo(headerPopup);
- action = new Q3Action(NULL, _("Show Data"), 0, this);
- action->setToggleAction(TRUE);
+ action->setChecked(showRange);
+ headerPopup->addAction(action);
+ action = new QAction(_("Show Data"), this);
+ action->setCheckable(true);
connect(action, SIGNAL(toggled(bool)),
parent(), SLOT(setShowData(bool)));
connect(parent(), SIGNAL(showDataChanged(bool)),
action, SLOT(setOn(bool)));
- action->setOn(showData);
- action->addTo(headerPopup);
+ action->setChecked(showData);
+ headerPopup->addAction(action);
}
headerPopup->exec(e->globalPos());
e->accept();
@@ -868,11 +912,17 @@ QAction *ConfigView::showAllAction;
QAction *ConfigView::showPromptAction;
ConfigView::ConfigView(QWidget* parent, const char *name)
- : Parent(parent, name)
+ : Parent(parent)
{
- list = new ConfigList(this, name);
+ setObjectName(name);
+ QVBoxLayout *verticalLayout = new QVBoxLayout(this);
+ verticalLayout->setContentsMargins(0, 0, 0, 0);
+
+ list = new ConfigList(this);
+ verticalLayout->addWidget(list);
lineEdit = new ConfigLineEdit(this);
lineEdit->hide();
+ verticalLayout->addWidget(lineEdit);
this->nextView = viewList;
viewList = this;
@@ -931,10 +981,13 @@ void ConfigView::setShowData(bool b)
void ConfigList::setAllOpen(bool open)
{
- Q3ListViewItemIterator it(this);
+ QTreeWidgetItemIterator it(this);
+
+ while (*it) {
+ (*it)->setExpanded(open);
- for (; it.current(); it++)
- it.current()->setOpen(open);
+ ++it;
+ }
}
void ConfigView::updateList(ConfigItem* item)
@@ -954,11 +1007,14 @@ void ConfigView::updateListAll(void)
}
ConfigInfoView::ConfigInfoView(QWidget* parent, const char *name)
- : Parent(parent, name), sym(0), _menu(0)
+ : Parent(parent), sym(0), _menu(0)
{
- if (name) {
- configSettings->beginGroup(name);
- _showDebug = configSettings->readBoolEntry("/showDebug", false);
+ setObjectName(name);
+
+
+ if (!objectName().isEmpty()) {
+ configSettings->beginGroup(objectName());
+ _showDebug = configSettings->value("/showDebug", false).toBool();
configSettings->endGroup();
connect(configApp, SIGNAL(aboutToQuit()), SLOT(saveSettings()));
}
@@ -966,9 +1022,9 @@ ConfigInfoView::ConfigInfoView(QWidget* parent, const char *name)
void ConfigInfoView::saveSettings(void)
{
- if (name()) {
- configSettings->beginGroup(name());
- configSettings->writeEntry("/showDebug", showDebug());
+ if (!objectName().isEmpty()) {
+ configSettings->beginGroup(objectName());
+ configSettings->setValue("/showDebug", showDebug());
configSettings->endGroup();
}
}
@@ -1127,8 +1183,8 @@ QString ConfigInfoView::print_filter(const QString &str)
{
QRegExp re("[<>&\"\\n]");
QString res = str;
- for (int i = 0; (i = res.find(re, i)) >= 0;) {
- switch (res[i].latin1()) {
+ for (int i = 0; (i = res.indexOf(re, i)) >= 0;) {
+ switch (res[i].toLatin1()) {
case '<':
res.replace(i, 1, "&lt;");
i += 4;
@@ -1167,37 +1223,42 @@ void ConfigInfoView::expr_print_help(void *data, struct symbol *sym, const char
*text += str2;
}
-Q3PopupMenu* ConfigInfoView::createPopupMenu(const QPoint& pos)
+QMenu* ConfigInfoView::createStandardContextMenu(const QPoint & pos)
{
- Q3PopupMenu* popup = Parent::createPopupMenu(pos);
- Q3Action* action = new Q3Action(NULL, _("Show Debug Info"), 0, popup);
- action->setToggleAction(TRUE);
+ QMenu* popup = Parent::createStandardContextMenu(pos);
+ QAction* action = new QAction(_("Show Debug Info"), popup);
+ action->setCheckable(true);
connect(action, SIGNAL(toggled(bool)), SLOT(setShowDebug(bool)));
connect(this, SIGNAL(showDebugChanged(bool)), action, SLOT(setOn(bool)));
- action->setOn(showDebug());
- popup->insertSeparator();
- action->addTo(popup);
+ action->setChecked(showDebug());
+ popup->addSeparator();
+ popup->addAction(action);
return popup;
}
-void ConfigInfoView::contentsContextMenuEvent(QContextMenuEvent *e)
+void ConfigInfoView::contextMenuEvent(QContextMenuEvent *e)
{
- Parent::contentsContextMenuEvent(e);
+ Parent::contextMenuEvent(e);
}
ConfigSearchWindow::ConfigSearchWindow(ConfigMainWindow* parent, const char *name)
- : Parent(parent, name), result(NULL)
+ : Parent(parent), result(NULL)
{
- setCaption("Search Config");
+ setObjectName(name);
+ setWindowTitle("Search Config");
- QVBoxLayout* layout1 = new QVBoxLayout(this, 11, 6);
- QHBoxLayout* layout2 = new QHBoxLayout(0, 0, 6);
+ QVBoxLayout* layout1 = new QVBoxLayout(this);
+ layout1->setContentsMargins(11, 11, 11, 11);
+ layout1->setSpacing(6);
+ QHBoxLayout* layout2 = new QHBoxLayout(0);
+ layout2->setContentsMargins(0, 0, 0, 0);
+ layout2->setSpacing(6);
layout2->addWidget(new QLabel(_("Find:"), this));
editField = new QLineEdit(this);
connect(editField, SIGNAL(returnPressed()), SLOT(search()));
layout2->addWidget(editField);
searchButton = new QPushButton(_("Search"), this);
- searchButton->setAutoDefault(FALSE);
+ searchButton->setAutoDefault(false);
connect(searchButton, SIGNAL(clicked()), SLOT(search()));
layout2->addWidget(searchButton);
layout1->addLayout(layout2);
@@ -1215,19 +1276,19 @@ ConfigSearchWindow::ConfigSearchWindow(ConfigMainWindow* parent, const char *nam
layout1->addWidget(split);
if (name) {
- int x, y, width, height;
+ QVariant x, y;
+ int width, height;
bool ok;
configSettings->beginGroup(name);
- width = configSettings->readNumEntry("/window width", parent->width() / 2);
- height = configSettings->readNumEntry("/window height", parent->height() / 2);
+ width = configSettings->value("/window width", parent->width() / 2).toInt();
+ height = configSettings->value("/window height", parent->height() / 2).toInt();
resize(width, height);
- x = configSettings->readNumEntry("/window x", 0, &ok);
- if (ok)
- y = configSettings->readNumEntry("/window y", 0, &ok);
- if (ok)
- move(x, y);
- Q3ValueList<int> sizes = configSettings->readSizes("/split", &ok);
+ x = configSettings->value("/window x");
+ y = configSettings->value("/window y");
+ if ((x.isValid())&&(y.isValid()))
+ move(x.toInt(), y.toInt());
+ QList<int> sizes = configSettings->readSizes("/split", &ok);
if (ok)
split->setSizes(sizes);
configSettings->endGroup();
@@ -1237,12 +1298,12 @@ ConfigSearchWindow::ConfigSearchWindow(ConfigMainWindow* parent, const char *nam
void ConfigSearchWindow::saveSettings(void)
{
- if (name()) {
- configSettings->beginGroup(name());
- configSettings->writeEntry("/window x", pos().x());
- configSettings->writeEntry("/window y", pos().y());
- configSettings->writeEntry("/window width", size().width());
- configSettings->writeEntry("/window height", size().height());
+ if (!objectName().isEmpty()) {
+ configSettings->beginGroup(objectName());
+ configSettings->setValue("/window x", pos().x());
+ configSettings->setValue("/window y", pos().y());
+ configSettings->setValue("/window width", size().width());
+ configSettings->setValue("/window height", size().height());
configSettings->writeSizes("/split", split->sizes());
configSettings->endGroup();
}
@@ -1258,7 +1319,7 @@ void ConfigSearchWindow::search(void)
list->list->clear();
info->clear();
- result = sym_re_search(editField->text().latin1());
+ result = sym_re_search(editField->text().toLatin1());
if (!result)
return;
for (p = result; *p; p++) {
@@ -1275,29 +1336,25 @@ ConfigMainWindow::ConfigMainWindow(void)
: searchWindow(0)
{
QMenuBar* menu;
- bool ok;
- int x, y, width, height;
+ bool ok = true;
+ QVariant x, y;
+ int width, height;
char title[256];
QDesktopWidget *d = configApp->desktop();
snprintf(title, sizeof(title), "%s%s",
rootmenu.prompt->text,
-#if QT_VERSION < 0x040000
- " (Qt3)"
-#else
""
-#endif
);
- setCaption(title);
+ setWindowTitle(title);
- width = configSettings->readNumEntry("/window width", d->width() - 64);
- height = configSettings->readNumEntry("/window height", d->height() - 64);
+ width = configSettings->value("/window width", d->width() - 64).toInt();
+ height = configSettings->value("/window height", d->height() - 64).toInt();
resize(width, height);
- x = configSettings->readNumEntry("/window x", 0, &ok);
- if (ok)
- y = configSettings->readNumEntry("/window y", 0, &ok);
- if (ok)
- move(x, y);
+ x = configSettings->value("/window x");
+ y = configSettings->value("/window y");
+ if ((x.isValid())&&(y.isValid()))
+ move(x.toInt(), y.toInt());
split1 = new QSplitter(this);
split1->setOrientation(Qt::Horizontal);
@@ -1314,127 +1371,115 @@ ConfigMainWindow::ConfigMainWindow(void)
configList = configView->list;
helpText = new ConfigInfoView(split2, "help");
- helpText->setTextFormat(Qt::RichText);
setTabOrder(configList, helpText);
configList->setFocus();
menu = menuBar();
- toolBar = new Q3ToolBar("Tools", this);
-
- backAction = new Q3Action("Back", QPixmap(xpm_back), _("Back"), 0, this);
- connect(backAction, SIGNAL(activated()), SLOT(goBack()));
- backAction->setEnabled(FALSE);
- Q3Action *quitAction = new Q3Action("Quit", _("&Quit"), Qt::CTRL + Qt::Key_Q, this);
- connect(quitAction, SIGNAL(activated()), SLOT(close()));
- Q3Action *loadAction = new Q3Action("Load", QPixmap(xpm_load), _("&Load"), Qt::CTRL + Qt::Key_L, this);
- connect(loadAction, SIGNAL(activated()), SLOT(loadConfig()));
- saveAction = new Q3Action("Save", QPixmap(xpm_save), _("&Save"), Qt::CTRL + Qt::Key_S, this);
- connect(saveAction, SIGNAL(activated()), SLOT(saveConfig()));
+ toolBar = new QToolBar("Tools", this);
+ addToolBar(toolBar);
+
+ backAction = new QAction(QPixmap(xpm_back), _("Back"), this);
+ connect(backAction, SIGNAL(triggered(bool)), SLOT(goBack()));
+ backAction->setEnabled(false);
+ QAction *quitAction = new QAction(_("&Quit"), this);
+ quitAction->setShortcut(Qt::CTRL + Qt::Key_Q);
+ connect(quitAction, SIGNAL(triggered(bool)), SLOT(close()));
+ QAction *loadAction = new QAction(QPixmap(xpm_load), _("&Load"), this);
+ loadAction->setShortcut(Qt::CTRL + Qt::Key_L);
+ connect(loadAction, SIGNAL(triggered(bool)), SLOT(loadConfig()));
+ saveAction = new QAction(QPixmap(xpm_save), _("&Save"), this);
+ saveAction->setShortcut(Qt::CTRL + Qt::Key_S);
+ connect(saveAction, SIGNAL(triggered(bool)), SLOT(saveConfig()));
conf_set_changed_callback(conf_changed);
// Set saveAction's initial state
conf_changed();
- Q3Action *saveAsAction = new Q3Action("Save As...", _("Save &As..."), 0, this);
- connect(saveAsAction, SIGNAL(activated()), SLOT(saveConfigAs()));
- Q3Action *searchAction = new Q3Action("Find", _("&Find"), Qt::CTRL + Qt::Key_F, this);
- connect(searchAction, SIGNAL(activated()), SLOT(searchConfig()));
- Q3Action *singleViewAction = new Q3Action("Single View", QPixmap(xpm_single_view), _("Single View"), 0, this);
- connect(singleViewAction, SIGNAL(activated()), SLOT(showSingleView()));
- Q3Action *splitViewAction = new Q3Action("Split View", QPixmap(xpm_split_view), _("Split View"), 0, this);
- connect(splitViewAction, SIGNAL(activated()), SLOT(showSplitView()));
- Q3Action *fullViewAction = new Q3Action("Full View", QPixmap(xpm_tree_view), _("Full View"), 0, this);
- connect(fullViewAction, SIGNAL(activated()), SLOT(showFullView()));
-
- Q3Action *showNameAction = new Q3Action(NULL, _("Show Name"), 0, this);
- showNameAction->setToggleAction(TRUE);
+ QAction *saveAsAction = new QAction(_("Save &As..."), this);
+ connect(saveAsAction, SIGNAL(triggered(bool)), SLOT(saveConfigAs()));
+ QAction *searchAction = new QAction(_("&Find"), this);
+ searchAction->setShortcut(Qt::CTRL + Qt::Key_F);
+ connect(searchAction, SIGNAL(triggered(bool)), SLOT(searchConfig()));
+ singleViewAction = new QAction(QPixmap(xpm_single_view), _("Single View"), this);
+ singleViewAction->setCheckable(true);
+ connect(singleViewAction, SIGNAL(triggered(bool)), SLOT(showSingleView()));
+ splitViewAction = new QAction(QPixmap(xpm_split_view), _("Split View"), this);
+ splitViewAction->setCheckable(true);
+ connect(splitViewAction, SIGNAL(triggered(bool)), SLOT(showSplitView()));
+ fullViewAction = new QAction(QPixmap(xpm_tree_view), _("Full View"), this);
+ fullViewAction->setCheckable(true);
+ connect(fullViewAction, SIGNAL(triggered(bool)), SLOT(showFullView()));
+
+ QAction *showNameAction = new QAction(_("Show Name"), this);
+ showNameAction->setCheckable(true);
connect(showNameAction, SIGNAL(toggled(bool)), configView, SLOT(setShowName(bool)));
- connect(configView, SIGNAL(showNameChanged(bool)), showNameAction, SLOT(setOn(bool)));
- showNameAction->setOn(configView->showName());
- Q3Action *showRangeAction = new Q3Action(NULL, _("Show Range"), 0, this);
- showRangeAction->setToggleAction(TRUE);
+ showNameAction->setChecked(configView->showName());
+ QAction *showRangeAction = new QAction(_("Show Range"), this);
+ showRangeAction->setCheckable(true);
connect(showRangeAction, SIGNAL(toggled(bool)), configView, SLOT(setShowRange(bool)));
- connect(configView, SIGNAL(showRangeChanged(bool)), showRangeAction, SLOT(setOn(bool)));
- showRangeAction->setOn(configList->showRange);
- Q3Action *showDataAction = new Q3Action(NULL, _("Show Data"), 0, this);
- showDataAction->setToggleAction(TRUE);
+ QAction *showDataAction = new QAction(_("Show Data"), this);
+ showDataAction->setCheckable(true);
connect(showDataAction, SIGNAL(toggled(bool)), configView, SLOT(setShowData(bool)));
- connect(configView, SIGNAL(showDataChanged(bool)), showDataAction, SLOT(setOn(bool)));
- showDataAction->setOn(configList->showData);
QActionGroup *optGroup = new QActionGroup(this);
- optGroup->setExclusive(TRUE);
- connect(optGroup, SIGNAL(selected(QAction *)), configView,
+ optGroup->setExclusive(true);
+ connect(optGroup, SIGNAL(triggered(QAction*)), configView,
SLOT(setOptionMode(QAction *)));
- connect(optGroup, SIGNAL(selected(QAction *)), menuView,
+ connect(optGroup, SIGNAL(triggered(QAction *)), menuView,
SLOT(setOptionMode(QAction *)));
-#if QT_VERSION >= 0x040000
configView->showNormalAction = new QAction(_("Show Normal Options"), optGroup);
configView->showAllAction = new QAction(_("Show All Options"), optGroup);
configView->showPromptAction = new QAction(_("Show Prompt Options"), optGroup);
-#else
- configView->showNormalAction = new QAction(_("Show Normal Options"), 0, optGroup);
- configView->showAllAction = new QAction(_("Show All Options"), 0, optGroup);
- configView->showPromptAction = new QAction(_("Show Prompt Options"), 0, optGroup);
-#endif
- configView->showNormalAction->setToggleAction(TRUE);
- configView->showNormalAction->setOn(configList->optMode == normalOpt);
- configView->showAllAction->setToggleAction(TRUE);
- configView->showAllAction->setOn(configList->optMode == allOpt);
- configView->showPromptAction->setToggleAction(TRUE);
- configView->showPromptAction->setOn(configList->optMode == promptOpt);
-
- Q3Action *showDebugAction = new Q3Action(NULL, _("Show Debug Info"), 0, this);
- showDebugAction->setToggleAction(TRUE);
+ configView->showNormalAction->setCheckable(true);
+ configView->showAllAction->setCheckable(true);
+ configView->showPromptAction->setCheckable(true);
+
+ QAction *showDebugAction = new QAction( _("Show Debug Info"), this);
+ showDebugAction->setCheckable(true);
connect(showDebugAction, SIGNAL(toggled(bool)), helpText, SLOT(setShowDebug(bool)));
- connect(helpText, SIGNAL(showDebugChanged(bool)), showDebugAction, SLOT(setOn(bool)));
- showDebugAction->setOn(helpText->showDebug());
+ showDebugAction->setChecked(helpText->showDebug());
- Q3Action *showIntroAction = new Q3Action(NULL, _("Introduction"), 0, this);
- connect(showIntroAction, SIGNAL(activated()), SLOT(showIntro()));
- Q3Action *showAboutAction = new Q3Action(NULL, _("About"), 0, this);
- connect(showAboutAction, SIGNAL(activated()), SLOT(showAbout()));
+ QAction *showIntroAction = new QAction( _("Introduction"), this);
+ connect(showIntroAction, SIGNAL(triggered(bool)), SLOT(showIntro()));
+ QAction *showAboutAction = new QAction( _("About"), this);
+ connect(showAboutAction, SIGNAL(triggered(bool)), SLOT(showAbout()));
// init tool bar
- backAction->addTo(toolBar);
+ toolBar->addAction(backAction);
toolBar->addSeparator();
- loadAction->addTo(toolBar);
- saveAction->addTo(toolBar);
+ toolBar->addAction(loadAction);
+ toolBar->addAction(saveAction);
toolBar->addSeparator();
- singleViewAction->addTo(toolBar);
- splitViewAction->addTo(toolBar);
- fullViewAction->addTo(toolBar);
+ toolBar->addAction(singleViewAction);
+ toolBar->addAction(splitViewAction);
+ toolBar->addAction(fullViewAction);
// create config menu
- Q3PopupMenu* config = new Q3PopupMenu(this);
- menu->insertItem(_("&File"), config);
- loadAction->addTo(config);
- saveAction->addTo(config);
- saveAsAction->addTo(config);
- config->insertSeparator();
- quitAction->addTo(config);
+ QMenu* config = menu->addMenu(_("&File"));
+ config->addAction(loadAction);
+ config->addAction(saveAction);
+ config->addAction(saveAsAction);
+ config->addSeparator();
+ config->addAction(quitAction);
// create edit menu
- Q3PopupMenu* editMenu = new Q3PopupMenu(this);
- menu->insertItem(_("&Edit"), editMenu);
- searchAction->addTo(editMenu);
+ QMenu* editMenu = menu->addMenu(_("&Edit"));
+ editMenu->addAction(searchAction);
// create options menu
- Q3PopupMenu* optionMenu = new Q3PopupMenu(this);
- menu->insertItem(_("&Option"), optionMenu);
- showNameAction->addTo(optionMenu);
- showRangeAction->addTo(optionMenu);
- showDataAction->addTo(optionMenu);
- optionMenu->insertSeparator();
- optGroup->addTo(optionMenu);
- optionMenu->insertSeparator();
+ QMenu* optionMenu = menu->addMenu(_("&Option"));
+ optionMenu->addAction(showNameAction);
+ optionMenu->addAction(showRangeAction);
+ optionMenu->addAction(showDataAction);
+ optionMenu->addSeparator();
+ optionMenu->addActions(optGroup->actions());
+ optionMenu->addSeparator();
// create help menu
- Q3PopupMenu* helpMenu = new Q3PopupMenu(this);
- menu->insertSeparator();
- menu->insertItem(_("&Help"), helpMenu);
- showIntroAction->addTo(helpMenu);
- showAboutAction->addTo(helpMenu);
+ menu->addSeparator();
+ QMenu* helpMenu = menu->addMenu(_("&Help"));
+ helpMenu->addAction(showIntroAction);
+ helpMenu->addAction(showAboutAction);
connect(configList, SIGNAL(menuChanged(struct menu *)),
helpText, SLOT(setInfo(struct menu *)));
@@ -1456,7 +1501,7 @@ ConfigMainWindow::ConfigMainWindow(void)
connect(helpText, SIGNAL(menuSelected(struct menu *)),
SLOT(setMenuLink(struct menu *)));
- QString listMode = configSettings->readEntry("/listMode", "symbol");
+ QString listMode = configSettings->value("/listMode", "symbol").toString();
if (listMode == "single")
showSingleView();
else if (listMode == "full")
@@ -1465,7 +1510,7 @@ ConfigMainWindow::ConfigMainWindow(void)
showSplitView();
// UI setup done, restore splitter positions
- Q3ValueList<int> sizes = configSettings->readSizes("/split1", &ok);
+ QList<int> sizes = configSettings->readSizes("/split1", &ok);
if (ok)
split1->setSizes(sizes);
@@ -1476,7 +1521,7 @@ ConfigMainWindow::ConfigMainWindow(void)
void ConfigMainWindow::loadConfig(void)
{
- QString s = Q3FileDialog::getOpenFileName(conf_get_configname(), NULL, this);
+ QString s = QFileDialog::getOpenFileName(this, "", conf_get_configname());
if (s.isNull())
return;
if (conf_read(QFile::encodeName(s)))
@@ -1495,7 +1540,7 @@ bool ConfigMainWindow::saveConfig(void)
void ConfigMainWindow::saveConfigAs(void)
{
- QString s = Q3FileDialog::getSaveFileName(conf_get_configname(), NULL, this);
+ QString s = QFileDialog::getSaveFileName(this, "", conf_get_configname());
if (s.isNull())
return;
saveConfig();
@@ -1512,9 +1557,9 @@ void ConfigMainWindow::changeMenu(struct menu *menu)
{
configList->setRootMenu(menu);
if (configList->rootEntry->parent == &rootmenu)
- backAction->setEnabled(FALSE);
+ backAction->setEnabled(false);
else
- backAction->setEnabled(TRUE);
+ backAction->setEnabled(true);
}
void ConfigMainWindow::setMenuLink(struct menu *menu)
@@ -1546,8 +1591,8 @@ void ConfigMainWindow::setMenuLink(struct menu *menu)
return;
item = menuList->findConfigItem(parent);
if (item) {
- menuList->setSelected(item, TRUE);
- menuList->ensureItemVisible(item);
+ item->setSelected(true);
+ menuList->scrollToItem(item);
}
list->setRootMenu(parent);
}
@@ -1562,8 +1607,8 @@ void ConfigMainWindow::setMenuLink(struct menu *menu)
if (list) {
item = list->findConfigItem(menu);
if (item) {
- list->setSelected(item, TRUE);
- list->ensureItemVisible(item);
+ item->setSelected(true);
+ list->scrollToItem(item);
list->setFocus();
}
}
@@ -1577,15 +1622,21 @@ void ConfigMainWindow::listFocusChanged(void)
void ConfigMainWindow::goBack(void)
{
- ConfigItem* item;
+ ConfigItem* item, *oldSelection;
configList->setParentMenu();
if (configList->rootEntry == &rootmenu)
- backAction->setEnabled(FALSE);
- item = (ConfigItem*)menuList->selectedItem();
+ backAction->setEnabled(false);
+
+ if (menuList->selectedItems().count() == 0)
+ return;
+
+ item = (ConfigItem*)menuList->selectedItems().first();
+ oldSelection = item;
while (item) {
if (item->menu == configList->rootEntry) {
- menuList->setSelected(item, TRUE);
+ oldSelection->setSelected(false);
+ item->setSelected(true);
break;
}
item = (ConfigItem*)item->parent();
@@ -1594,6 +1645,13 @@ void ConfigMainWindow::goBack(void)
void ConfigMainWindow::showSingleView(void)
{
+ singleViewAction->setEnabled(false);
+ singleViewAction->setChecked(true);
+ splitViewAction->setEnabled(true);
+ splitViewAction->setChecked(false);
+ fullViewAction->setEnabled(true);
+ fullViewAction->setChecked(false);
+
menuView->hide();
menuList->setRootMenu(0);
configList->mode = singleMode;
@@ -1601,28 +1659,41 @@ void ConfigMainWindow::showSingleView(void)
configList->updateListAll();
else
configList->setRootMenu(&rootmenu);
- configList->setAllOpen(TRUE);
configList->setFocus();
}
void ConfigMainWindow::showSplitView(void)
{
+ singleViewAction->setEnabled(true);
+ singleViewAction->setChecked(false);
+ splitViewAction->setEnabled(false);
+ splitViewAction->setChecked(true);
+ fullViewAction->setEnabled(true);
+ fullViewAction->setChecked(false);
+
configList->mode = symbolMode;
if (configList->rootEntry == &rootmenu)
configList->updateListAll();
else
configList->setRootMenu(&rootmenu);
- configList->setAllOpen(TRUE);
+ configList->setAllOpen(true);
configApp->processEvents();
menuList->mode = menuMode;
menuList->setRootMenu(&rootmenu);
- menuList->setAllOpen(TRUE);
+ menuList->setAllOpen(true);
menuView->show();
menuList->setFocus();
}
void ConfigMainWindow::showFullView(void)
{
+ singleViewAction->setEnabled(true);
+ singleViewAction->setChecked(false);
+ splitViewAction->setEnabled(true);
+ splitViewAction->setChecked(false);
+ fullViewAction->setEnabled(false);
+ fullViewAction->setChecked(true);
+
menuView->hide();
menuList->setRootMenu(0);
configList->mode = fullMode;
@@ -1630,7 +1701,6 @@ void ConfigMainWindow::showFullView(void)
configList->updateListAll();
else
configList->setRootMenu(&rootmenu);
- configList->setAllOpen(FALSE);
configList->setFocus();
}
@@ -1684,7 +1754,8 @@ void ConfigMainWindow::showIntro(void)
void ConfigMainWindow::showAbout(void)
{
- static const QString str = _("qconf is Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>.\n\n"
+ static const QString str = _("qconf is Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>.\n"
+ "Copyright (C) 2015 Boris Barbulovski <bbarbulovski@gmail.com>.\n\n"
"Bug reports and feature request can also be entered at http://bugzilla.kernel.org/\n");
QMessageBox::information(this, "qconf", str);
@@ -1692,10 +1763,10 @@ void ConfigMainWindow::showAbout(void)
void ConfigMainWindow::saveSettings(void)
{
- configSettings->writeEntry("/window x", pos().x());
- configSettings->writeEntry("/window y", pos().y());
- configSettings->writeEntry("/window width", size().width());
- configSettings->writeEntry("/window height", size().height());
+ configSettings->setValue("/window x", pos().x());
+ configSettings->setValue("/window y", pos().y());
+ configSettings->setValue("/window width", size().width());
+ configSettings->setValue("/window height", size().height());
QString entry;
switch(configList->mode) {
@@ -1714,7 +1785,7 @@ void ConfigMainWindow::saveSettings(void)
default:
break;
}
- configSettings->writeEntry("/listMode", entry);
+ configSettings->setValue("/listMode", entry);
configSettings->writeSizes("/split1", split1->sizes());
configSettings->writeSizes("/split2", split2->sizes());
@@ -1746,7 +1817,7 @@ static const char *progname;
static void usage(void)
{
- printf(_("%s [-s] <config>\n"), progname);
+ printf(_("%s [-s] <config>\n").toLatin1().constData(), progname);
exit(0);
}
@@ -1785,7 +1856,6 @@ int main(int ac, char** av)
v = new ConfigMainWindow();
//zconfdump(stdout);
- configApp->setMainWidget(v);
configApp->connect(configApp, SIGNAL(lastWindowClosed()), SLOT(quit()));
configApp->connect(configApp, SIGNAL(aboutToQuit()), v, SLOT(saveSettings()));
v->show();
diff --git a/scripts/kconfig/qconf.h b/scripts/kconfig/qconf.h
index bde0c6b6f9e8..a40036d1b059 100644
--- a/scripts/kconfig/qconf.h
+++ b/scripts/kconfig/qconf.h
@@ -3,26 +3,18 @@
* Released under the terms of the GNU GPL v2.0.
*/
-#if QT_VERSION < 0x040000
-#include <qlistview.h>
-#else
-#include <q3listview.h>
-#endif
+#include <QTextBrowser>
+#include <QTreeWidget>
+#include <QMainWindow>
+#include <QHeaderView>
#include <qsettings.h>
-
-#if QT_VERSION < 0x040000
-#define Q3ValueList QValueList
-#define Q3PopupMenu QPopupMenu
-#define Q3ListView QListView
-#define Q3ListViewItem QListViewItem
-#define Q3VBox QVBox
-#define Q3TextBrowser QTextBrowser
-#define Q3MainWindow QMainWindow
-#define Q3Action QAction
-#define Q3ToolBar QToolBar
-#define Q3ListViewItemIterator QListViewItemIterator
-#define Q3FileDialog QFileDialog
-#endif
+#include <QPushButton>
+#include <QSettings>
+#include <QLineEdit>
+#include <QSplitter>
+#include <QCheckBox>
+#include <QDialog>
+#include "expr.h"
class ConfigView;
class ConfigList;
@@ -33,8 +25,8 @@ class ConfigMainWindow;
class ConfigSettings : public QSettings {
public:
ConfigSettings();
- Q3ValueList<int> readSizes(const QString& key, bool *ok);
- bool writeSizes(const QString& key, const Q3ValueList<int>& value);
+ QList<int> readSizes(const QString& key, bool *ok);
+ bool writeSizes(const QString& key, const QList<int>& value);
};
enum colIdx {
@@ -47,9 +39,9 @@ enum optionMode {
normalOpt = 0, allOpt, promptOpt
};
-class ConfigList : public Q3ListView {
+class ConfigList : public QTreeWidget {
Q_OBJECT
- typedef class Q3ListView Parent;
+ typedef class QTreeWidget Parent;
public:
ConfigList(ConfigView* p, const char *name = 0);
void reinit(void);
@@ -61,10 +53,10 @@ public:
protected:
void keyPressEvent(QKeyEvent *e);
- void contentsMousePressEvent(QMouseEvent *e);
- void contentsMouseReleaseEvent(QMouseEvent *e);
- void contentsMouseMoveEvent(QMouseEvent *e);
- void contentsMouseDoubleClickEvent(QMouseEvent *e);
+ void mousePressEvent(QMouseEvent *e);
+ void mouseReleaseEvent(QMouseEvent *e);
+ void mouseMoveEvent(QMouseEvent *e);
+ void mouseDoubleClickEvent(QMouseEvent *e);
void focusInEvent(QFocusEvent *e);
void contextMenuEvent(QContextMenuEvent *e);
@@ -95,32 +87,23 @@ public:
}
ConfigItem* firstChild() const
{
- return (ConfigItem *)Parent::firstChild();
- }
- int mapIdx(colIdx idx)
- {
- return colMap[idx];
+ return (ConfigItem *)children().first();
}
- void addColumn(colIdx idx, const QString& label)
+ void addColumn(colIdx idx)
{
- colMap[idx] = Parent::addColumn(label);
- colRevMap[colMap[idx]] = idx;
+ showColumn(idx);
}
void removeColumn(colIdx idx)
{
- int col = colMap[idx];
- if (col >= 0) {
- Parent::removeColumn(col);
- colRevMap[col] = colMap[idx] = -1;
- }
+ hideColumn(idx);
}
void setAllOpen(bool open);
void setParentMenu(void);
bool menuSkip(struct menu *);
- template <class P>
- void updateMenuList(P*, struct menu*);
+ void updateMenuList(ConfigItem *parent, struct menu*);
+ void updateMenuList(ConfigList *parent, struct menu*);
bool updateAll;
@@ -132,30 +115,26 @@ public:
enum listMode mode;
enum optionMode optMode;
struct menu *rootEntry;
- QColorGroup disabledColorGroup;
- QColorGroup inactivedColorGroup;
- Q3PopupMenu* headerPopup;
-
-private:
- int colMap[colNr];
- int colRevMap[colNr];
+ QPalette disabledColorGroup;
+ QPalette inactivedColorGroup;
+ QMenu* headerPopup;
};
-class ConfigItem : public Q3ListViewItem {
- typedef class Q3ListViewItem Parent;
+class ConfigItem : public QTreeWidgetItem {
+ typedef class QTreeWidgetItem Parent;
public:
- ConfigItem(Q3ListView *parent, ConfigItem *after, struct menu *m, bool v)
- : Parent(parent, after), menu(m), visible(v), goParent(false)
+ ConfigItem(ConfigList *parent, ConfigItem *after, struct menu *m, bool v)
+ : Parent(parent, after), nextItem(0), menu(m), visible(v), goParent(false)
{
init();
}
ConfigItem(ConfigItem *parent, ConfigItem *after, struct menu *m, bool v)
- : Parent(parent, after), menu(m), visible(v), goParent(false)
+ : Parent(parent, after), nextItem(0), menu(m), visible(v), goParent(false)
{
init();
}
- ConfigItem(Q3ListView *parent, ConfigItem *after, bool v)
- : Parent(parent, after), menu(0), visible(v), goParent(true)
+ ConfigItem(ConfigList *parent, ConfigItem *after, bool v)
+ : Parent(parent, after), nextItem(0), menu(0), visible(v), goParent(true)
{
init();
}
@@ -166,33 +145,43 @@ public:
void testUpdateMenu(bool v);
ConfigList* listView() const
{
- return (ConfigList*)Parent::listView();
+ return (ConfigList*)Parent::treeWidget();
}
ConfigItem* firstChild() const
{
- return (ConfigItem *)Parent::firstChild();
+ return (ConfigItem *)Parent::child(0);
}
- ConfigItem* nextSibling() const
+ ConfigItem* nextSibling()
{
- return (ConfigItem *)Parent::nextSibling();
+ ConfigItem *ret = NULL;
+ ConfigItem *_parent = (ConfigItem *)parent();
+
+ if(_parent) {
+ ret = (ConfigItem *)_parent->child(_parent->indexOfChild(this)+1);
+ } else {
+ QTreeWidget *_treeWidget = treeWidget();
+ ret = (ConfigItem *)_treeWidget->topLevelItem(_treeWidget->indexOfTopLevelItem(this)+1);
+ }
+
+ return ret;
}
void setText(colIdx idx, const QString& text)
{
- Parent::setText(listView()->mapIdx(idx), text);
+ Parent::setText(idx, text);
}
QString text(colIdx idx) const
{
- return Parent::text(listView()->mapIdx(idx));
+ return Parent::text(idx);
}
- void setPixmap(colIdx idx, const QPixmap& pm)
+ void setPixmap(colIdx idx, const QIcon &icon)
{
- Parent::setPixmap(listView()->mapIdx(idx), pm);
+ Parent::setIcon(idx, icon);
}
- const QPixmap* pixmap(colIdx idx) const
+ const QIcon pixmap(colIdx idx) const
{
- return Parent::pixmap(listView()->mapIdx(idx));
+ return icon(idx);
}
- void paintCell(QPainter* p, const QColorGroup& cg, int column, int width, int align);
+ // TODO: Implement paintCell
ConfigItem* nextItem;
struct menu *menu;
@@ -216,9 +205,9 @@ public:
ConfigItem *item;
};
-class ConfigView : public Q3VBox {
+class ConfigView : public QWidget {
Q_OBJECT
- typedef class Q3VBox Parent;
+ typedef class QWidget Parent;
public:
ConfigView(QWidget* parent, const char *name = 0);
~ConfigView(void);
@@ -249,9 +238,9 @@ public:
static QAction *showPromptAction;
};
-class ConfigInfoView : public Q3TextBrowser {
+class ConfigInfoView : public QTextBrowser {
Q_OBJECT
- typedef class Q3TextBrowser Parent;
+ typedef class QTextBrowser Parent;
public:
ConfigInfoView(QWidget* parent, const char *name = 0);
bool showDebug(void) const { return _showDebug; }
@@ -271,8 +260,8 @@ protected:
QString debug_info(struct symbol *sym);
static QString print_filter(const QString &str);
static void expr_print_help(void *data, struct symbol *sym, const char *str);
- Q3PopupMenu* createPopupMenu(const QPoint& pos);
- void contentsContextMenuEvent(QContextMenuEvent *e);
+ QMenu *createStandardContextMenu(const QPoint & pos);
+ void contextMenuEvent(QContextMenuEvent *e);
struct symbol *sym;
struct menu *_menu;
@@ -299,10 +288,10 @@ protected:
struct symbol **result;
};
-class ConfigMainWindow : public Q3MainWindow {
+class ConfigMainWindow : public QMainWindow {
Q_OBJECT
- static Q3Action *saveAction;
+ static QAction *saveAction;
static void conf_changed(void);
public:
ConfigMainWindow(void);
@@ -331,8 +320,11 @@ protected:
ConfigView *configView;
ConfigList *configList;
ConfigInfoView *helpText;
- Q3ToolBar *toolBar;
- Q3Action *backAction;
- QSplitter* split1;
- QSplitter* split2;
+ QToolBar *toolBar;
+ QAction *backAction;
+ QAction *singleViewAction;
+ QAction *splitViewAction;
+ QAction *fullViewAction;
+ QSplitter *split1;
+ QSplitter *split2;
};
diff --git a/scripts/kconfig/symbol.c b/scripts/kconfig/symbol.c
index 50878dc025a5..25cf0c2c0c79 100644
--- a/scripts/kconfig/symbol.c
+++ b/scripts/kconfig/symbol.c
@@ -1116,6 +1116,8 @@ static void sym_check_print_recursive(struct symbol *last_sym)
if (stack->sym == last_sym)
fprintf(stderr, "%s:%d:error: recursive dependency detected!\n",
prop->file->name, prop->lineno);
+ fprintf(stderr, "For a resolution refer to Documentation/kbuild/kconfig-language.txt\n");
+ fprintf(stderr, "subsection \"Kconfig recursive dependency limitations\"\n");
if (stack->expr) {
fprintf(stderr, "%s:%d:\tsymbol %s %s value contains %s\n",
prop->file->name, prop->lineno,
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 13:57:33 +0000