summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS18
-rw-r--r--drivers/phy/Kconfig491
-rw-r--r--drivers/phy/Makefile70
-rw-r--r--drivers/phy/allwinner/Kconfig31
-rw-r--r--drivers/phy/allwinner/Makefile2
-rw-r--r--drivers/phy/allwinner/phy-sun4i-usb.c (renamed from drivers/phy/phy-sun4i-usb.c)0
-rw-r--r--drivers/phy/allwinner/phy-sun9i-usb.c (renamed from drivers/phy/phy-sun9i-usb.c)0
-rw-r--r--drivers/phy/amlogic/Kconfig14
-rw-r--r--drivers/phy/amlogic/Makefile1
-rw-r--r--drivers/phy/amlogic/phy-meson8b-usb2.c (renamed from drivers/phy/phy-meson8b-usb2.c)0
-rw-r--r--drivers/phy/broadcom/Kconfig55
-rw-r--r--drivers/phy/broadcom/Makefile6
-rw-r--r--drivers/phy/broadcom/phy-bcm-cygnus-pcie.c (renamed from drivers/phy/phy-bcm-cygnus-pcie.c)0
-rw-r--r--drivers/phy/broadcom/phy-bcm-kona-usb2.c (renamed from drivers/phy/phy-bcm-kona-usb2.c)0
-rw-r--r--drivers/phy/broadcom/phy-bcm-ns-usb2.c (renamed from drivers/phy/phy-bcm-ns-usb2.c)0
-rw-r--r--drivers/phy/broadcom/phy-bcm-ns-usb3.c (renamed from drivers/phy/phy-bcm-ns-usb3.c)0
-rw-r--r--drivers/phy/broadcom/phy-bcm-ns2-pcie.c (renamed from drivers/phy/phy-bcm-ns2-pcie.c)0
-rw-r--r--drivers/phy/broadcom/phy-brcm-sata.c (renamed from drivers/phy/phy-brcm-sata.c)0
-rw-r--r--drivers/phy/hisilicon/Kconfig20
-rw-r--r--drivers/phy/hisilicon/Makefile2
-rw-r--r--drivers/phy/hisilicon/phy-hi6220-usb.c (renamed from drivers/phy/phy-hi6220-usb.c)0
-rw-r--r--drivers/phy/hisilicon/phy-hix5hd2-sata.c (renamed from drivers/phy/phy-hix5hd2-sata.c)0
-rw-r--r--drivers/phy/marvell/Kconfig50
-rw-r--r--drivers/phy/marvell/Makefile6
-rw-r--r--drivers/phy/marvell/phy-armada375-usb2.c (renamed from drivers/phy/phy-armada375-usb2.c)0
-rw-r--r--drivers/phy/marvell/phy-berlin-sata.c (renamed from drivers/phy/phy-berlin-sata.c)0
-rw-r--r--drivers/phy/marvell/phy-berlin-usb.c (renamed from drivers/phy/phy-berlin-usb.c)0
-rw-r--r--drivers/phy/marvell/phy-mvebu-sata.c (renamed from drivers/phy/phy-mvebu-sata.c)0
-rw-r--r--drivers/phy/marvell/phy-pxa-28nm-hsic.c (renamed from drivers/phy/phy-pxa-28nm-hsic.c)0
-rw-r--r--drivers/phy/marvell/phy-pxa-28nm-usb2.c (renamed from drivers/phy/phy-pxa-28nm-usb2.c)0
-rw-r--r--drivers/phy/qualcomm/Kconfig58
-rw-r--r--drivers/phy/qualcomm/Makefile9
-rw-r--r--drivers/phy/qualcomm/phy-qcom-apq8064-sata.c (renamed from drivers/phy/phy-qcom-apq8064-sata.c)0
-rw-r--r--drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c (renamed from drivers/phy/phy-qcom-ipq806x-sata.c)0
-rw-r--r--drivers/phy/qualcomm/phy-qcom-qmp.c (renamed from drivers/phy/phy-qcom-qmp.c)0
-rw-r--r--drivers/phy/qualcomm/phy-qcom-qusb2.c (renamed from drivers/phy/phy-qcom-qusb2.c)0
-rw-r--r--drivers/phy/qualcomm/phy-qcom-ufs-i.h (renamed from drivers/phy/phy-qcom-ufs-i.h)0
-rw-r--r--drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c (renamed from drivers/phy/phy-qcom-ufs-qmp-14nm.c)0
-rw-r--r--drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.h (renamed from drivers/phy/phy-qcom-ufs-qmp-14nm.h)0
-rw-r--r--drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c (renamed from drivers/phy/phy-qcom-ufs-qmp-20nm.c)0
-rw-r--r--drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.h (renamed from drivers/phy/phy-qcom-ufs-qmp-20nm.h)0
-rw-r--r--drivers/phy/qualcomm/phy-qcom-ufs.c (renamed from drivers/phy/phy-qcom-ufs.c)0
-rw-r--r--drivers/phy/qualcomm/phy-qcom-usb-hs.c (renamed from drivers/phy/phy-qcom-usb-hs.c)0
-rw-r--r--drivers/phy/qualcomm/phy-qcom-usb-hsic.c (renamed from drivers/phy/phy-qcom-usb-hsic.c)0
-rw-r--r--drivers/phy/renesas/Kconfig17
-rw-r--r--drivers/phy/renesas/Makefile2
-rw-r--r--drivers/phy/renesas/phy-rcar-gen2.c (renamed from drivers/phy/phy-rcar-gen2.c)0
-rw-r--r--drivers/phy/renesas/phy-rcar-gen3-usb2.c (renamed from drivers/phy/phy-rcar-gen3-usb2.c)0
-rw-r--r--drivers/phy/rockchip/Kconfig51
-rw-r--r--drivers/phy/rockchip/Makefile6
-rw-r--r--drivers/phy/rockchip/phy-rockchip-dp.c (renamed from drivers/phy/phy-rockchip-dp.c)0
-rw-r--r--drivers/phy/rockchip/phy-rockchip-emmc.c (renamed from drivers/phy/phy-rockchip-emmc.c)0
-rw-r--r--drivers/phy/rockchip/phy-rockchip-inno-usb2.c (renamed from drivers/phy/phy-rockchip-inno-usb2.c)0
-rw-r--r--drivers/phy/rockchip/phy-rockchip-pcie.c (renamed from drivers/phy/phy-rockchip-pcie.c)0
-rw-r--r--drivers/phy/rockchip/phy-rockchip-typec.c (renamed from drivers/phy/phy-rockchip-typec.c)0
-rw-r--r--drivers/phy/rockchip/phy-rockchip-usb.c (renamed from drivers/phy/phy-rockchip-usb.c)0
-rw-r--r--drivers/phy/samsung/Kconfig95
-rw-r--r--drivers/phy/samsung/Makefile11
-rw-r--r--drivers/phy/samsung/phy-exynos-dp-video.c (renamed from drivers/phy/phy-exynos-dp-video.c)0
-rw-r--r--drivers/phy/samsung/phy-exynos-mipi-video.c (renamed from drivers/phy/phy-exynos-mipi-video.c)0
-rw-r--r--drivers/phy/samsung/phy-exynos-pcie.c (renamed from drivers/phy/phy-exynos-pcie.c)0
-rw-r--r--drivers/phy/samsung/phy-exynos4210-usb2.c (renamed from drivers/phy/phy-exynos4210-usb2.c)0
-rw-r--r--drivers/phy/samsung/phy-exynos4x12-usb2.c (renamed from drivers/phy/phy-exynos4x12-usb2.c)0
-rw-r--r--drivers/phy/samsung/phy-exynos5-usbdrd.c (renamed from drivers/phy/phy-exynos5-usbdrd.c)0
-rw-r--r--drivers/phy/samsung/phy-exynos5250-sata.c (renamed from drivers/phy/phy-exynos5250-sata.c)0
-rw-r--r--drivers/phy/samsung/phy-exynos5250-usb2.c (renamed from drivers/phy/phy-exynos5250-usb2.c)0
-rw-r--r--drivers/phy/samsung/phy-s5pv210-usb2.c (renamed from drivers/phy/phy-s5pv210-usb2.c)0
-rw-r--r--drivers/phy/samsung/phy-samsung-usb2.c (renamed from drivers/phy/phy-samsung-usb2.c)0
-rw-r--r--drivers/phy/samsung/phy-samsung-usb2.h (renamed from drivers/phy/phy-samsung-usb2.h)0
-rw-r--r--drivers/phy/st/Kconfig33
-rw-r--r--drivers/phy/st/Makefile4
-rw-r--r--drivers/phy/st/phy-miphy28lp.c (renamed from drivers/phy/phy-miphy28lp.c)0
-rw-r--r--drivers/phy/st/phy-spear1310-miphy.c (renamed from drivers/phy/phy-spear1310-miphy.c)0
-rw-r--r--drivers/phy/st/phy-spear1340-miphy.c (renamed from drivers/phy/phy-spear1340-miphy.c)0
-rw-r--r--drivers/phy/st/phy-stih407-usb.c (renamed from drivers/phy/phy-stih407-usb.c)0
-rw-r--r--drivers/phy/ti/Kconfig78
-rw-r--r--drivers/phy/ti/Makefile7
-rw-r--r--drivers/phy/ti/phy-da8xx-usb.c (renamed from drivers/phy/phy-da8xx-usb.c)0
-rw-r--r--drivers/phy/ti/phy-dm816x-usb.c (renamed from drivers/phy/phy-dm816x-usb.c)0
-rw-r--r--drivers/phy/ti/phy-omap-control.c (renamed from drivers/phy/phy-omap-control.c)0
-rw-r--r--drivers/phy/ti/phy-omap-usb2.c (renamed from drivers/phy/phy-omap-usb2.c)0
-rw-r--r--drivers/phy/ti/phy-ti-pipe3.c (renamed from drivers/phy/phy-ti-pipe3.c)0
-rw-r--r--drivers/phy/ti/phy-tusb1210.c (renamed from drivers/phy/phy-tusb1210.c)0
-rw-r--r--drivers/phy/ti/phy-twl4030-usb.c (renamed from drivers/phy/phy-twl4030-usb.c)0
84 files changed, 591 insertions, 546 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index f7d568b8f133..a47d3da4d35d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1844,8 +1844,8 @@ F: drivers/i2c/busses/i2c-st.c
F: drivers/media/rc/st_rc.c
F: drivers/media/platform/sti/c8sectpfe/
F: drivers/mmc/host/sdhci-st.c
-F: drivers/phy/phy-miphy28lp.c
-F: drivers/phy/phy-stih407-usb.c
+F: drivers/phy/st/phy-miphy28lp.c
+F: drivers/phy/st/phy-stih407-usb.c
F: drivers/pinctrl/pinctrl-st.c
F: drivers/remoteproc/st_remoteproc.c
F: drivers/remoteproc/st_slim_rproc.c
@@ -10833,7 +10833,7 @@ RENESAS USB2 PHY DRIVER
M: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
L: linux-renesas-soc@vger.kernel.org
S: Maintained
-F: drivers/phy/phy-rcar-gen3-usb2.c
+F: drivers/phy/renesas/phy-rcar-gen3-usb2.c
RESET CONTROLLER FRAMEWORK
M: Philipp Zabel <p.zabel@pengutronix.de>
@@ -11235,12 +11235,12 @@ L: linux-kernel@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/phy/samsung-phy.txt
F: Documentation/phy/samsung-usb2.txt
-F: drivers/phy/phy-exynos4210-usb2.c
-F: drivers/phy/phy-exynos4x12-usb2.c
-F: drivers/phy/phy-exynos5250-usb2.c
-F: drivers/phy/phy-s5pv210-usb2.c
-F: drivers/phy/phy-samsung-usb2.c
-F: drivers/phy/phy-samsung-usb2.h
+F: drivers/phy/samsung/phy-exynos4210-usb2.c
+F: drivers/phy/samsung/phy-exynos4x12-usb2.c
+F: drivers/phy/samsung/phy-exynos5250-usb2.c
+F: drivers/phy/samsung/phy-s5pv210-usb2.c
+F: drivers/phy/samsung/phy-samsung-usb2.c
+F: drivers/phy/samsung/phy-samsung-usb2.h
SERIAL DRIVERS
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index afaf7b643eeb..01009b2a7d74 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -15,73 +15,6 @@ config GENERIC_PHY
phy users can obtain reference to the PHY. All the users of this
framework should select this config.
-config PHY_BCM_NS_USB2
- tristate "Broadcom Northstar USB 2.0 PHY Driver"
- depends on ARCH_BCM_IPROC || COMPILE_TEST
- depends on HAS_IOMEM && OF
- select GENERIC_PHY
- help
- Enable this to support Broadcom USB 2.0 PHY connected to the USB
- controller on Northstar family.
-
-config PHY_BCM_NS_USB3
- tristate "Broadcom Northstar USB 3.0 PHY Driver"
- depends on ARCH_BCM_IPROC || COMPILE_TEST
- depends on HAS_IOMEM && OF
- select GENERIC_PHY
- help
- Enable this to support Broadcom USB 3.0 PHY connected to the USB
- controller on Northstar family.
-
-config PHY_BERLIN_USB
- tristate "Marvell Berlin USB PHY Driver"
- depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
- select GENERIC_PHY
- help
- Enable this to support the USB PHY on Marvell Berlin SoCs.
-
-config PHY_BERLIN_SATA
- tristate "Marvell Berlin SATA PHY driver"
- depends on ARCH_BERLIN && HAS_IOMEM && OF
- select GENERIC_PHY
- help
- Enable this to support the SATA PHY on Marvell Berlin SoCs.
-
-config ARMADA375_USBCLUSTER_PHY
- def_bool y
- depends on MACH_ARMADA_375 || COMPILE_TEST
- depends on OF && HAS_IOMEM
- select GENERIC_PHY
-
-config PHY_DA8XX_USB
- tristate "TI DA8xx USB PHY Driver"
- depends on ARCH_DAVINCI_DA8XX
- select GENERIC_PHY
- select MFD_SYSCON
- help
- Enable this to support the USB PHY on DA8xx SoCs.
-
- This driver controls both the USB 1.1 PHY and the USB 2.0 PHY.
-
-config PHY_DM816X_USB
- tristate "TI dm816x USB PHY driver"
- depends on ARCH_OMAP2PLUS
- depends on USB_SUPPORT
- select GENERIC_PHY
- select USB_PHY
- help
- Enable this for dm816x USB to work.
-
-config PHY_EXYNOS_MIPI_VIDEO
- tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
- depends on HAS_IOMEM
- depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
- select GENERIC_PHY
- default y if ARCH_S5PV210 || ARCH_EXYNOS
- help
- Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
- and EXYNOS SoCs.
-
config PHY_LPC18XX_USB_OTG
tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
@@ -93,146 +26,6 @@ config PHY_LPC18XX_USB_OTG
This driver is need for USB0 support on LPC18xx/43xx and takes
care of enabling and clock setup.
-config PHY_PXA_28NM_HSIC
- tristate "Marvell USB HSIC 28nm PHY Driver"
- depends on HAS_IOMEM
- select GENERIC_PHY
- help
- Enable this to support Marvell USB HSIC PHY driver for Marvell
- SoC. This driver will do the PHY initialization and shutdown.
- The PHY driver will be used by Marvell ehci driver.
-
- To compile this driver as a module, choose M here.
-
-config PHY_PXA_28NM_USB2
- tristate "Marvell USB 2.0 28nm PHY Driver"
- depends on HAS_IOMEM
- select GENERIC_PHY
- help
- Enable this to support Marvell USB 2.0 PHY driver for Marvell
- SoC. This driver will do the PHY initialization and shutdown.
- The PHY driver will be used by Marvell udc/ehci/otg driver.
-
- To compile this driver as a module, choose M here.
-
-config PHY_MVEBU_SATA
- def_bool y
- depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
- depends on OF
- select GENERIC_PHY
-
-config PHY_MIPHY28LP
- tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
- depends on ARCH_STI
- select GENERIC_PHY
- help
- Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
- that is part of STMicroelectronics STiH407 SoC.
-
-config PHY_RCAR_GEN2
- tristate "Renesas R-Car generation 2 USB PHY driver"
- depends on ARCH_RENESAS
- depends on GENERIC_PHY
- help
- Support for USB PHY found on Renesas R-Car generation 2 SoCs.
-
-config PHY_RCAR_GEN3_USB2
- tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
- depends on ARCH_RENESAS
- depends on EXTCON
- select GENERIC_PHY
- help
- Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
-
-config OMAP_CONTROL_PHY
- tristate "OMAP CONTROL PHY Driver"
- depends on ARCH_OMAP2PLUS || COMPILE_TEST
- help
- Enable this to add support for the PHY part present in the control
- module. This driver has API to power on the USB2 PHY and to write to
- the mailbox. The mailbox is present only in omap4 and the register to
- power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
- additional register to power on USB3 PHY/SATA PHY/PCIE PHY
- (PIPE3 PHY).
-
-config OMAP_USB2
- tristate "OMAP USB2 PHY Driver"
- depends on ARCH_OMAP2PLUS
- depends on USB_SUPPORT
- select GENERIC_PHY
- select USB_PHY
- select OMAP_CONTROL_PHY
- depends on OMAP_OCP2SCP
- help
- Enable this to support the transceiver that is part of SOC. This
- driver takes care of all the PHY functionality apart from comparator.
- The USB OTG controller communicates with the comparator using this
- driver.
-
-config TI_PIPE3
- tristate "TI PIPE3 PHY Driver"
- depends on ARCH_OMAP2PLUS || COMPILE_TEST
- select GENERIC_PHY
- select OMAP_CONTROL_PHY
- depends on OMAP_OCP2SCP
- help
- Enable this to support the PIPE3 PHY that is part of TI SOCs. This
- driver takes care of all the PHY functionality apart from comparator.
- This driver interacts with the "OMAP Control PHY Driver" to power
- on/off the PHY.
-
-config TWL4030_USB
- tristate "TWL4030 USB Transceiver Driver"
- depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
- depends on USB_SUPPORT
- depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y'
- select GENERIC_PHY
- select USB_PHY
- help
- Enable this to support the USB OTG transceiver on TWL4030
- family chips (including the TWL5030 and TPS659x0 devices).
- This transceiver supports high and full speed devices plus,
- in host mode, low speed.
-
-config PHY_EXYNOS_DP_VIDEO
- tristate "EXYNOS SoC series Display Port PHY driver"
- depends on OF
- depends on ARCH_EXYNOS || COMPILE_TEST
- default ARCH_EXYNOS
- select GENERIC_PHY
- help
- Support for Display Port PHY found on Samsung EXYNOS SoCs.
-
-config BCM_KONA_USB2_PHY
- tristate "Broadcom Kona USB2 PHY Driver"
- depends on HAS_IOMEM
- select GENERIC_PHY
- help
- Enable this to support the Broadcom Kona USB 2.0 PHY.
-
-config PHY_EXYNOS5250_SATA
- tristate "Exynos5250 Sata SerDes/PHY driver"
- depends on SOC_EXYNOS5250
- depends on HAS_IOMEM
- depends on OF
- select GENERIC_PHY
- select I2C
- select I2C_S3C2410
- select MFD_SYSCON
- help
- Enable this to support SATA SerDes/Phy found on Samsung's
- Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
- SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
- port to accept one SATA device.
-
-config PHY_HIX5HD2_SATA
- tristate "HIX5HD2 SATA PHY Driver"
- depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
- select GENERIC_PHY
- select MFD_SYSCON
- help
- Support for SATA PHY on Hisilicon hix5hd2 Soc.
-
config PHY_MT65XX_USB3
tristate "Mediatek USB3.0 PHY Driver"
depends on ARCH_MEDIATEK && OF
@@ -241,104 +34,6 @@ config PHY_MT65XX_USB3
Say 'Y' here to add support for Mediatek USB3.0 PHY driver,
it supports multiple usb2.0 and usb3.0 ports.
-config PHY_HI6220_USB
- tristate "hi6220 USB PHY support"
- depends on (ARCH_HISI && ARM64) || COMPILE_TEST
- select GENERIC_PHY
- select MFD_SYSCON
- help
- Enable this to support the HISILICON HI6220 USB PHY.
-
- To compile this driver as a module, choose M here.
-
-config PHY_SUN4I_USB
- tristate "Allwinner sunxi SoC USB PHY driver"
- depends on ARCH_SUNXI && HAS_IOMEM && OF
- depends on RESET_CONTROLLER
- depends on EXTCON
- depends on POWER_SUPPLY
- depends on USB_SUPPORT
- select GENERIC_PHY
- select USB_COMMON
- help
- Enable this to support the transceiver that is part of Allwinner
- sunxi SoCs.
-
- This driver controls the entire USB PHY block, both the USB OTG
- parts, as well as the 2 regular USB 2 host PHYs.
-
-config PHY_SUN9I_USB
- tristate "Allwinner sun9i SoC USB PHY driver"
- depends on ARCH_SUNXI && HAS_IOMEM && OF
- depends on RESET_CONTROLLER
- depends on USB_SUPPORT
- select USB_COMMON
- select GENERIC_PHY
- help
- Enable this to support the transceiver that is part of Allwinner
- sun9i SoCs.
-
- This driver controls each individual USB 2 host PHY.
-
-config PHY_SAMSUNG_USB2
- tristate "Samsung USB 2.0 PHY driver"
- depends on HAS_IOMEM
- depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
- select GENERIC_PHY
- select MFD_SYSCON
- default ARCH_EXYNOS
- help
- Enable this to support the Samsung USB 2.0 PHY driver for Samsung
- SoCs. This driver provides the interface for USB 2.0 PHY. Support
- for particular PHYs will be enabled based on the SoC type in addition
- to this driver.
-
-config PHY_S5PV210_USB2
- bool "Support for S5PV210"
- depends on PHY_SAMSUNG_USB2
- depends on ARCH_S5PV210
- help
- Enable USB PHY support for S5PV210. This option requires that Samsung
- USB 2.0 PHY driver is enabled and means that support for this
- particular SoC is compiled in the driver. In case of S5PV210 two phys
- are available - device and host.
-
-config PHY_EXYNOS4210_USB2
- bool
- depends on PHY_SAMSUNG_USB2
- default CPU_EXYNOS4210
-
-config PHY_EXYNOS4X12_USB2
- bool
- depends on PHY_SAMSUNG_USB2
- default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
-
-config PHY_EXYNOS5250_USB2
- bool
- depends on PHY_SAMSUNG_USB2
- default SOC_EXYNOS5250 || SOC_EXYNOS5420
-
-config PHY_EXYNOS5_USBDRD
- tristate "Exynos5 SoC series USB DRD PHY driver"
- depends on ARCH_EXYNOS && OF
- depends on HAS_IOMEM
- depends on USB_DWC3_EXYNOS
- select GENERIC_PHY
- select MFD_SYSCON
- default y
- help
- Enable USB DRD PHY support for Exynos 5 SoC series.
- This driver provides PHY interface for USB 3.0 DRD controller
- present on Exynos5 SoC series.
-
-config PHY_EXYNOS_PCIE
- bool "Exynos PCIe PHY driver"
- depends on OF && (ARCH_EXYNOS || COMPILE_TEST)
- select GENERIC_PHY
- help
- Enable PCIe PHY support for Exynos SoC series.
- This driver provides PHY interface for Exynos PCIe controller.
-
config PHY_PISTACHIO_USB
tristate "IMG Pistachio USB2.0 PHY driver"
depends on MACH_PISTACHIO
@@ -346,83 +41,6 @@ config PHY_PISTACHIO_USB
help
Enable this to support the USB2.0 PHY on the IMG Pistachio SoC.
-config PHY_QCOM_APQ8064_SATA
- tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
- depends on ARCH_QCOM
- depends on HAS_IOMEM
- depends on OF
- select GENERIC_PHY
-
-config PHY_QCOM_IPQ806X_SATA
- tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
- depends on ARCH_QCOM
- depends on HAS_IOMEM
- depends on OF
- select GENERIC_PHY
-
-config PHY_ROCKCHIP_USB
- tristate "Rockchip USB2 PHY Driver"
- depends on ARCH_ROCKCHIP && OF
- select GENERIC_PHY
- help
- Enable this to support the Rockchip USB 2.0 PHY.
-
-config PHY_ROCKCHIP_INNO_USB2
- tristate "Rockchip INNO USB2PHY Driver"
- depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
- depends on COMMON_CLK
- depends on EXTCON
- depends on USB_SUPPORT
- select GENERIC_PHY
- select USB_COMMON
- help
- Support for Rockchip USB2.0 PHY with Innosilicon IP block.
-
-config PHY_ROCKCHIP_EMMC
- tristate "Rockchip EMMC PHY Driver"
- depends on ARCH_ROCKCHIP && OF
- select GENERIC_PHY
- help
- Enable this to support the Rockchip EMMC PHY.
-
-config PHY_ROCKCHIP_DP
- tristate "Rockchip Display Port PHY Driver"
- depends on ARCH_ROCKCHIP && OF
- select GENERIC_PHY
- help
- Enable this to support the Rockchip Display Port PHY.
-
-config PHY_ROCKCHIP_PCIE
- tristate "Rockchip PCIe PHY Driver"
- depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
- select GENERIC_PHY
- select MFD_SYSCON
- help
- Enable this to support the Rockchip PCIe PHY.
-
-config PHY_ROCKCHIP_TYPEC
- tristate "Rockchip TYPEC PHY Driver"
- depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
- select EXTCON
- select GENERIC_PHY
- select RESET_CONTROLLER
- help
- Enable this to support the Rockchip USB TYPEC PHY.
-
-config PHY_ST_SPEAR1310_MIPHY
- tristate "ST SPEAR1310-MIPHY driver"
- select GENERIC_PHY
- depends on MACH_SPEAR1310 || COMPILE_TEST
- help
- Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
-
-config PHY_ST_SPEAR1340_MIPHY
- tristate "ST SPEAR1340-MIPHY driver"
- select GENERIC_PHY
- depends on MACH_SPEAR1340 || COMPILE_TEST
- help
- Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
-
config PHY_XGENE
tristate "APM X-Gene 15Gbps PHY support"
depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
@@ -430,104 +48,17 @@ config PHY_XGENE
help
This option enables support for APM X-Gene SoC multi-purpose PHY.
-config PHY_STIH407_USB
- tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
- depends on RESET_CONTROLLER
- depends on ARCH_STI || COMPILE_TEST
- select GENERIC_PHY
- help
- Enable this support to enable the picoPHY device used by USB2
- and USB3 controllers on STMicroelectronics STiH407 SoC families.
-
-config PHY_QCOM_QMP
- tristate "Qualcomm QMP PHY Driver"
- depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
- select GENERIC_PHY
- help
- Enable this to support the QMP PHY transceiver that is used
- with controllers such as PCIe, UFS, and USB on Qualcomm chips.
-
-config PHY_QCOM_QUSB2
- tristate "Qualcomm QUSB2 PHY Driver"
- depends on OF && (ARCH_QCOM || COMPILE_TEST)
- depends on NVMEM || !NVMEM
- select GENERIC_PHY
- help
- Enable this to support the HighSpeed QUSB2 PHY transceiver for USB
- controllers on Qualcomm chips. This driver supports the high-speed
- PHY which is usually paired with either the ChipIdea or Synopsys DWC3
- USB IPs on MSM SOCs.
-
-config PHY_QCOM_UFS
- tristate "Qualcomm UFS PHY driver"
- depends on OF && ARCH_QCOM
- select GENERIC_PHY
- help
- Support for UFS PHY on QCOM chipsets.
-
-config PHY_QCOM_USB_HS
- tristate "Qualcomm USB HS PHY module"
- depends on USB_ULPI_BUS
- depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
- select GENERIC_PHY
- help
- Support for the USB high-speed ULPI compliant phy on Qualcomm
- chipsets.
-
-config PHY_QCOM_USB_HSIC
- tristate "Qualcomm USB HSIC ULPI PHY module"
- depends on USB_ULPI_BUS
- select GENERIC_PHY
- help
- Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
-
-config PHY_TUSB1210
- tristate "TI TUSB1210 ULPI PHY module"
- depends on USB_ULPI_BUS
- select GENERIC_PHY
- help
- Support for TI TUSB1210 USB ULPI PHY.
-
-config PHY_BRCM_SATA
- tristate "Broadcom SATA PHY driver"
- depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST
- depends on OF
- select GENERIC_PHY
- default ARCH_BCM_IPROC
- help
- Enable this to support the Broadcom SATA PHY.
- If unsure, say N.
-
-config PHY_CYGNUS_PCIE
- tristate "Broadcom Cygnus PCIe PHY driver"
- depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
- select GENERIC_PHY
- default ARCH_BCM_CYGNUS
- help
- Enable this to support the Broadcom Cygnus PCIe PHY.
- If unsure, say N.
-
+source "drivers/phy/allwinner/Kconfig"
+source "drivers/phy/amlogic/Kconfig"
+source "drivers/phy/broadcom/Kconfig"
+source "drivers/phy/hisilicon/Kconfig"
+source "drivers/phy/marvell/Kconfig"
+source "drivers/phy/qualcomm/Kconfig"
+source "drivers/phy/renesas/Kconfig"
+source "drivers/phy/rockchip/Kconfig"
+source "drivers/phy/samsung/Kconfig"
+source "drivers/phy/st/Kconfig"
source "drivers/phy/tegra/Kconfig"
-
-config PHY_NS2_PCIE
- tristate "Broadcom Northstar2 PCIe PHY driver"
- depends on OF && MDIO_BUS_MUX_BCM_IPROC
- select GENERIC_PHY
- default ARCH_BCM_IPROC
- help
- Enable this to support the Broadcom Northstar2 PCIe PHY.
- If unsure, say N.
-
-config PHY_MESON8B_USB2
- tristate "Meson8b and GXBB USB2 PHY driver"
- default ARCH_MESON
- depends on OF && (ARCH_MESON || COMPILE_TEST)
- depends on USB_SUPPORT
- select USB_COMMON
- select GENERIC_PHY
- help
- Enable this to support the Meson USB2 PHYs found in Meson8b
- and GXBB SoCs.
- If unsure, say N.
+source "drivers/phy/ti/Kconfig"
endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index f8047b4639fa..c1bd1fa3c853 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -3,64 +3,20 @@
#
obj-$(CONFIG_GENERIC_PHY) += phy-core.o
-obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o
-obj-$(CONFIG_PHY_BCM_NS_USB3) += phy-bcm-ns-usb3.o
-obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
-obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
-obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o
-obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
-obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
-obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
-obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
-obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o
-obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o
-obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o
-obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
-obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o
-obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o
-obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o
-obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o
-obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
-obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
-obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
-obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
-obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
-obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
obj-$(CONFIG_PHY_MT65XX_USB3) += phy-mt65xx-usb3.o
-obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
-obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o
-obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
-phy-exynos-usb2-y += phy-samsung-usb2.o
-phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
-phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
-phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
-phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
-obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
-obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o
-obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
-obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
-obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o
-obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
-obj-$(CONFIG_PHY_ROCKCHIP_PCIE) += phy-rockchip-pcie.o
-obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
-obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o
-obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
-obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
-obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
-obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o
-obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o
-obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o
-obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o
-obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
-obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o
-obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o
-obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o
-obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
-obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o
obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
-obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
-obj-$(CONFIG_ARCH_TEGRA) += tegra/
-obj-$(CONFIG_PHY_NS2_PCIE) += phy-bcm-ns2-pcie.o
-obj-$(CONFIG_PHY_MESON8B_USB2) += phy-meson8b-usb2.o
+
+obj-$(CONFIG_ARCH_SUNXI) += allwinner/
+obj-$(CONFIG_ARCH_MESON) += amlogic/
+obj-$(CONFIG_ARCH_RENESAS) += renesas/
+obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
+obj-$(CONFIG_ARCH_TEGRA) += tegra/
+obj-y += broadcom/ \
+ hisilicon/ \
+ marvell/ \
+ qualcomm/ \
+ samsung/ \
+ st/ \
+ ti/
diff --git a/drivers/phy/allwinner/Kconfig b/drivers/phy/allwinner/Kconfig
new file mode 100644
index 000000000000..cdc1e745ba47
--- /dev/null
+++ b/drivers/phy/allwinner/Kconfig
@@ -0,0 +1,31 @@
+#
+# Phy drivers for Allwinner platforms
+#
+config PHY_SUN4I_USB
+ tristate "Allwinner sunxi SoC USB PHY driver"
+ depends on ARCH_SUNXI && HAS_IOMEM && OF
+ depends on RESET_CONTROLLER
+ depends on EXTCON
+ depends on POWER_SUPPLY
+ depends on USB_SUPPORT
+ select GENERIC_PHY
+ select USB_COMMON
+ help
+ Enable this to support the transceiver that is part of Allwinner
+ sunxi SoCs.
+
+ This driver controls the entire USB PHY block, both the USB OTG
+ parts, as well as the 2 regular USB 2 host PHYs.
+
+config PHY_SUN9I_USB
+ tristate "Allwinner sun9i SoC USB PHY driver"
+ depends on ARCH_SUNXI && HAS_IOMEM && OF
+ depends on RESET_CONTROLLER
+ depends on USB_SUPPORT
+ select USB_COMMON
+ select GENERIC_PHY
+ help
+ Enable this to support the transceiver that is part of Allwinner
+ sun9i SoCs.
+
+ This driver controls each individual USB 2 host PHY.
diff --git a/drivers/phy/allwinner/Makefile b/drivers/phy/allwinner/Makefile
new file mode 100644
index 000000000000..8605529c01a1
--- /dev/null
+++ b/drivers/phy/allwinner/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
+obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index bbf06cfe5898..bbf06cfe5898 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
diff --git a/drivers/phy/phy-sun9i-usb.c b/drivers/phy/allwinner/phy-sun9i-usb.c
index 28fce4bce638..28fce4bce638 100644
--- a/drivers/phy/phy-sun9i-usb.c
+++ b/drivers/phy/allwinner/phy-sun9i-usb.c
diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig
new file mode 100644
index 000000000000..edcd5b65179f
--- /dev/null
+++ b/drivers/phy/amlogic/Kconfig
@@ -0,0 +1,14 @@
+#
+# Phy drivers for Amlogic platforms
+#
+config PHY_MESON8B_USB2
+ tristate "Meson8b and GXBB USB2 PHY driver"
+ default ARCH_MESON
+ depends on OF && (ARCH_MESON || COMPILE_TEST)
+ depends on USB_SUPPORT
+ select USB_COMMON
+ select GENERIC_PHY
+ help
+ Enable this to support the Meson USB2 PHYs found in Meson8b
+ and GXBB SoCs.
+ If unsure, say N.
diff --git a/drivers/phy/amlogic/Makefile b/drivers/phy/amlogic/Makefile
new file mode 100644
index 000000000000..47b6eecc3864
--- /dev/null
+++ b/drivers/phy/amlogic/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_PHY_MESON8B_USB2) += phy-meson8b-usb2.o
diff --git a/drivers/phy/phy-meson8b-usb2.c b/drivers/phy/amlogic/phy-meson8b-usb2.c
index 30f56a6a411f..30f56a6a411f 100644
--- a/drivers/phy/phy-meson8b-usb2.c
+++ b/drivers/phy/amlogic/phy-meson8b-usb2.c
diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
new file mode 100644
index 000000000000..d2d99023ec50
--- /dev/null
+++ b/drivers/phy/broadcom/Kconfig
@@ -0,0 +1,55 @@
+#
+# Phy drivers for Broadcom platforms
+#
+config PHY_CYGNUS_PCIE
+ tristate "Broadcom Cygnus PCIe PHY driver"
+ depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
+ select GENERIC_PHY
+ default ARCH_BCM_CYGNUS
+ help
+ Enable this to support the Broadcom Cygnus PCIe PHY.
+ If unsure, say N.
+
+config BCM_KONA_USB2_PHY
+ tristate "Broadcom Kona USB2 PHY Driver"
+ depends on HAS_IOMEM
+ select GENERIC_PHY
+ help
+ Enable this to support the Broadcom Kona USB 2.0 PHY.
+
+config PHY_BCM_NS_USB2
+ tristate "Broadcom Northstar USB 2.0 PHY Driver"
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ depends on HAS_IOMEM && OF
+ select GENERIC_PHY
+ help
+ Enable this to support Broadcom USB 2.0 PHY connected to the USB
+ controller on Northstar family.
+
+config PHY_BCM_NS_USB3
+ tristate "Broadcom Northstar USB 3.0 PHY Driver"
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ depends on HAS_IOMEM && OF
+ select GENERIC_PHY
+ help
+ Enable this to support Broadcom USB 3.0 PHY connected to the USB
+ controller on Northstar family.
+
+config PHY_NS2_PCIE
+ tristate "Broadcom Northstar2 PCIe PHY driver"
+ depends on OF && MDIO_BUS_MUX_BCM_IPROC
+ select GENERIC_PHY
+ default ARCH_BCM_IPROC
+ help
+ Enable this to support the Broadcom Northstar2 PCIe PHY.
+ If unsure, say N.
+
+config PHY_BRCM_SATA
+ tristate "Broadcom SATA PHY driver"
+ depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST
+ depends on OF
+ select GENERIC_PHY
+ default ARCH_BCM_IPROC
+ help
+ Enable this to support the Broadcom SATA PHY.
+ If unsure, say N.
diff --git a/drivers/phy/broadcom/Makefile b/drivers/phy/broadcom/Makefile
new file mode 100644
index 000000000000..357a7d16529f
--- /dev/null
+++ b/drivers/phy/broadcom/Makefile
@@ -0,0 +1,6 @@
+obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
+obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
+obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o
+obj-$(CONFIG_PHY_BCM_NS_USB3) += phy-bcm-ns-usb3.o
+obj-$(CONFIG_PHY_NS2_PCIE) += phy-bcm-ns2-pcie.o
+obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o
diff --git a/drivers/phy/phy-bcm-cygnus-pcie.c b/drivers/phy/broadcom/phy-bcm-cygnus-pcie.c
index 0f4ac5d63cff..0f4ac5d63cff 100644
--- a/drivers/phy/phy-bcm-cygnus-pcie.c
+++ b/drivers/phy/broadcom/phy-bcm-cygnus-pcie.c
diff --git a/drivers/phy/phy-bcm-kona-usb2.c b/drivers/phy/broadcom/phy-bcm-kona-usb2.c
index 7b67fe49e30b..7b67fe49e30b 100644
--- a/drivers/phy/phy-bcm-kona-usb2.c
+++ b/drivers/phy/broadcom/phy-bcm-kona-usb2.c
diff --git a/drivers/phy/phy-bcm-ns-usb2.c b/drivers/phy/broadcom/phy-bcm-ns-usb2.c
index 58dff80e9386..58dff80e9386 100644
--- a/drivers/phy/phy-bcm-ns-usb2.c
+++ b/drivers/phy/broadcom/phy-bcm-ns-usb2.c
diff --git a/drivers/phy/phy-bcm-ns-usb3.c b/drivers/phy/broadcom/phy-bcm-ns-usb3.c
index 22b5e7047fa6..22b5e7047fa6 100644
--- a/drivers/phy/phy-bcm-ns-usb3.c
+++ b/drivers/phy/broadcom/phy-bcm-ns-usb3.c
diff --git a/drivers/phy/phy-bcm-ns2-pcie.c b/drivers/phy/broadcom/phy-bcm-ns2-pcie.c
index 4c7d11d2b378..4c7d11d2b378 100644
--- a/drivers/phy/phy-bcm-ns2-pcie.c
+++ b/drivers/phy/broadcom/phy-bcm-ns2-pcie.c
diff --git a/drivers/phy/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c
index ccbc3d994998..ccbc3d994998 100644
--- a/drivers/phy/phy-brcm-sata.c
+++ b/drivers/phy/broadcom/phy-brcm-sata.c
diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig
new file mode 100644
index 000000000000..6164c4cd0f65
--- /dev/null
+++ b/drivers/phy/hisilicon/Kconfig
@@ -0,0 +1,20 @@
+#
+# Phy drivers for Hisilicon platforms
+#
+config PHY_HI6220_USB
+ tristate "hi6220 USB PHY support"
+ depends on (ARCH_HISI && ARM64) || COMPILE_TEST
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Enable this to support the HISILICON HI6220 USB PHY.
+
+ To compile this driver as a module, choose M here.
+
+config PHY_HIX5HD2_SATA
+ tristate "HIX5HD2 SATA PHY Driver"
+ depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Support for SATA PHY on Hisilicon hix5hd2 Soc.
diff --git a/drivers/phy/hisilicon/Makefile b/drivers/phy/hisilicon/Makefile
new file mode 100644
index 000000000000..541b348187a8
--- /dev/null
+++ b/drivers/phy/hisilicon/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
+obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
diff --git a/drivers/phy/phy-hi6220-usb.c b/drivers/phy/hisilicon/phy-hi6220-usb.c
index 398c1021deec..398c1021deec 100644
--- a/drivers/phy/phy-hi6220-usb.c
+++ b/drivers/phy/hisilicon/phy-hi6220-usb.c
diff --git a/drivers/phy/phy-hix5hd2-sata.c b/drivers/phy/hisilicon/phy-hix5hd2-sata.c
index e5ab3aa78b9d..e5ab3aa78b9d 100644
--- a/drivers/phy/phy-hix5hd2-sata.c
+++ b/drivers/phy/hisilicon/phy-hix5hd2-sata.c
diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
new file mode 100644
index 000000000000..048d8893bc2e
--- /dev/null
+++ b/drivers/phy/marvell/Kconfig
@@ -0,0 +1,50 @@
+#
+# Phy drivers for Marvell platforms
+#
+config ARMADA375_USBCLUSTER_PHY
+ def_bool y
+ depends on MACH_ARMADA_375 || COMPILE_TEST
+ depends on OF && HAS_IOMEM
+ select GENERIC_PHY
+
+config PHY_BERLIN_SATA
+ tristate "Marvell Berlin SATA PHY driver"
+ depends on ARCH_BERLIN && HAS_IOMEM && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the SATA PHY on Marvell Berlin SoCs.
+
+config PHY_BERLIN_USB
+ tristate "Marvell Berlin USB PHY Driver"
+ depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the USB PHY on Marvell Berlin SoCs.
+
+config PHY_MVEBU_SATA
+ def_bool y
+ depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
+ depends on OF
+ select GENERIC_PHY
+
+config PHY_PXA_28NM_HSIC
+ tristate "Marvell USB HSIC 28nm PHY Driver"
+ depends on HAS_IOMEM
+ select GENERIC_PHY
+ help
+ Enable this to support Marvell USB HSIC PHY driver for Marvell
+ SoC. This driver will do the PHY initialization and shutdown.
+ The PHY driver will be used by Marvell ehci driver.
+
+ To compile this driver as a module, choose M here.
+
+config PHY_PXA_28NM_USB2
+ tristate "Marvell USB 2.0 28nm PHY Driver"
+ depends on HAS_IOMEM
+ select GENERIC_PHY
+ help
+ Enable this to support Marvell USB 2.0 PHY driver for Marvell
+ SoC. This driver will do the PHY initialization and shutdown.
+ The PHY driver will be used by Marvell udc/ehci/otg driver.
+
+ To compile this driver as a module, choose M here.
diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile
new file mode 100644
index 000000000000..3fc188f59118
--- /dev/null
+++ b/drivers/phy/marvell/Makefile
@@ -0,0 +1,6 @@
+obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
+obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
+obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
+obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
+obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o
+obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o
diff --git a/drivers/phy/phy-armada375-usb2.c b/drivers/phy/marvell/phy-armada375-usb2.c
index 1a3db288c0a9..1a3db288c0a9 100644
--- a/drivers/phy/phy-armada375-usb2.c
+++ b/drivers/phy/marvell/phy-armada375-usb2.c
diff --git a/drivers/phy/phy-berlin-sata.c b/drivers/phy/marvell/phy-berlin-sata.c
index 2c7a57f2d595..2c7a57f2d595 100644
--- a/drivers/phy/phy-berlin-sata.c
+++ b/drivers/phy/marvell/phy-berlin-sata.c
diff --git a/drivers/phy/phy-berlin-usb.c b/drivers/phy/marvell/phy-berlin-usb.c
index 2017751ede26..2017751ede26 100644
--- a/drivers/phy/phy-berlin-usb.c
+++ b/drivers/phy/marvell/phy-berlin-usb.c
diff --git a/drivers/phy/phy-mvebu-sata.c b/drivers/phy/marvell/phy-mvebu-sata.c
index 768ce92e81ce..768ce92e81ce 100644
--- a/drivers/phy/phy-mvebu-sata.c
+++ b/drivers/phy/marvell/phy-mvebu-sata.c
diff --git a/drivers/phy/phy-pxa-28nm-hsic.c b/drivers/phy/marvell/phy-pxa-28nm-hsic.c
index 234aacf4db20..234aacf4db20 100644
--- a/drivers/phy/phy-pxa-28nm-hsic.c
+++ b/drivers/phy/marvell/phy-pxa-28nm-hsic.c
diff --git a/drivers/phy/phy-pxa-28nm-usb2.c b/drivers/phy/marvell/phy-pxa-28nm-usb2.c
index 37e9c8ca4983..37e9c8ca4983 100644
--- a/drivers/phy/phy-pxa-28nm-usb2.c
+++ b/drivers/phy/marvell/phy-pxa-28nm-usb2.c
diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
new file mode 100644
index 000000000000..7bfa64baf837
--- /dev/null
+++ b/drivers/phy/qualcomm/Kconfig
@@ -0,0 +1,58 @@
+#
+# Phy drivers for Qualcomm platforms
+#
+config PHY_QCOM_APQ8064_SATA
+ tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
+ depends on ARCH_QCOM
+ depends on HAS_IOMEM
+ depends on OF
+ select GENERIC_PHY
+
+config PHY_QCOM_IPQ806X_SATA
+ tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
+ depends on ARCH_QCOM
+ depends on HAS_IOMEM
+ depends on OF
+ select GENERIC_PHY
+
+config PHY_QCOM_QMP
+ tristate "Qualcomm QMP PHY Driver"
+ depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
+ select GENERIC_PHY
+ help
+ Enable this to support the QMP PHY transceiver that is used
+ with controllers such as PCIe, UFS, and USB on Qualcomm chips.
+
+config PHY_QCOM_QUSB2
+ tristate "Qualcomm QUSB2 PHY Driver"
+ depends on OF && (ARCH_QCOM || COMPILE_TEST)
+ depends on NVMEM || !NVMEM
+ select GENERIC_PHY
+ help
+ Enable this to support the HighSpeed QUSB2 PHY transceiver for USB
+ controllers on Qualcomm chips. This driver supports the high-speed
+ PHY which is usually paired with either the ChipIdea or Synopsys DWC3
+ USB IPs on MSM SOCs.
+
+config PHY_QCOM_UFS
+ tristate "Qualcomm UFS PHY driver"
+ depends on OF && ARCH_QCOM
+ select GENERIC_PHY
+ help
+ Support for UFS PHY on QCOM chipsets.
+
+config PHY_QCOM_USB_HS
+ tristate "Qualcomm USB HS PHY module"
+ depends on USB_ULPI_BUS
+ depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
+ select GENERIC_PHY
+ help
+ Support for the USB high-speed ULPI compliant phy on Qualcomm
+ chipsets.
+
+config PHY_QCOM_USB_HSIC
+ tristate "Qualcomm USB HSIC ULPI PHY module"
+ depends on USB_ULPI_BUS
+ select GENERIC_PHY
+ help
+ Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile
new file mode 100644
index 000000000000..2e183d7695fd
--- /dev/null
+++ b/drivers/phy/qualcomm/Makefile
@@ -0,0 +1,9 @@
+obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
+obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
+obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o
+obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o
+obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o
+obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o
+obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
+obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o
+obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o
diff --git a/drivers/phy/phy-qcom-apq8064-sata.c b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
index 69ce2afac015..69ce2afac015 100644
--- a/drivers/phy/phy-qcom-apq8064-sata.c
+++ b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
diff --git a/drivers/phy/phy-qcom-ipq806x-sata.c b/drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c
index 0ad127cc9298..0ad127cc9298 100644
--- a/drivers/phy/phy-qcom-ipq806x-sata.c
+++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c
diff --git a/drivers/phy/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 78ca62897784..78ca62897784 100644
--- a/drivers/phy/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
diff --git a/drivers/phy/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 6c575244c0fb..6c575244c0fb 100644
--- a/drivers/phy/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
diff --git a/drivers/phy/phy-qcom-ufs-i.h b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
index 13b02b7de30b..13b02b7de30b 100644
--- a/drivers/phy/phy-qcom-ufs-i.h
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
index 12a1b498dc4b..12a1b498dc4b 100644
--- a/drivers/phy/phy-qcom-ufs-qmp-14nm.c
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.h b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.h
index 3aefdbacbcd0..3aefdbacbcd0 100644
--- a/drivers/phy/phy-qcom-ufs-qmp-14nm.h
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.h
diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
index 4f68acb58b73..4f68acb58b73 100644
--- a/drivers/phy/phy-qcom-ufs-qmp-20nm.c
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.h b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.h
index 4f3076bb3d71..4f3076bb3d71 100644
--- a/drivers/phy/phy-qcom-ufs-qmp-20nm.h
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.h
diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/qualcomm/phy-qcom-ufs.c
index 43865ef340e2..43865ef340e2 100644
--- a/drivers/phy/phy-qcom-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-ufs.c
diff --git a/drivers/phy/phy-qcom-usb-hs.c b/drivers/phy/qualcomm/phy-qcom-usb-hs.c
index 4b20abc3ae2f..4b20abc3ae2f 100644
--- a/drivers/phy/phy-qcom-usb-hs.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-hs.c
diff --git a/drivers/phy/phy-qcom-usb-hsic.c b/drivers/phy/qualcomm/phy-qcom-usb-hsic.c
index c110563a73cb..c110563a73cb 100644
--- a/drivers/phy/phy-qcom-usb-hsic.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-hsic.c
diff --git a/drivers/phy/renesas/Kconfig b/drivers/phy/renesas/Kconfig
new file mode 100644
index 000000000000..432e2715e9c4
--- /dev/null
+++ b/drivers/phy/renesas/Kconfig
@@ -0,0 +1,17 @@
+#
+# Phy drivers for Renesas platforms
+#
+config PHY_RCAR_GEN2
+ tristate "Renesas R-Car generation 2 USB PHY driver"
+ depends on ARCH_RENESAS
+ depends on GENERIC_PHY
+ help
+ Support for USB PHY found on Renesas R-Car generation 2 SoCs.
+
+config PHY_RCAR_GEN3_USB2
+ tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
+ depends on ARCH_RENESAS
+ depends on EXTCON
+ select GENERIC_PHY
+ help
+ Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
diff --git a/drivers/phy/renesas/Makefile b/drivers/phy/renesas/Makefile
new file mode 100644
index 000000000000..695241aebf69
--- /dev/null
+++ b/drivers/phy/renesas/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o
+obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o
diff --git a/drivers/phy/phy-rcar-gen2.c b/drivers/phy/renesas/phy-rcar-gen2.c
index 97d4dd6ea924..97d4dd6ea924 100644
--- a/drivers/phy/phy-rcar-gen2.c
+++ b/drivers/phy/renesas/phy-rcar-gen2.c
diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index 54c34298a000..54c34298a000 100644
--- a/drivers/phy/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
new file mode 100644
index 000000000000..f5325b2b679e
--- /dev/null
+++ b/drivers/phy/rockchip/Kconfig
@@ -0,0 +1,51 @@
+#
+# Phy drivers for Rockchip platforms
+#
+config PHY_ROCKCHIP_DP
+ tristate "Rockchip Display Port PHY Driver"
+ depends on ARCH_ROCKCHIP && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip Display Port PHY.
+
+config PHY_ROCKCHIP_EMMC
+ tristate "Rockchip EMMC PHY Driver"
+ depends on ARCH_ROCKCHIP && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip EMMC PHY.
+
+config PHY_ROCKCHIP_INNO_USB2
+ tristate "Rockchip INNO USB2PHY Driver"
+ depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
+ depends on COMMON_CLK
+ depends on EXTCON
+ depends on USB_SUPPORT
+ select GENERIC_PHY
+ select USB_COMMON
+ help
+ Support for Rockchip USB2.0 PHY with Innosilicon IP block.
+
+config PHY_ROCKCHIP_PCIE
+ tristate "Rockchip PCIe PHY Driver"
+ depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Enable this to support the Rockchip PCIe PHY.
+
+config PHY_ROCKCHIP_TYPEC
+ tristate "Rockchip TYPEC PHY Driver"
+ depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
+ select EXTCON
+ select GENERIC_PHY
+ select RESET_CONTROLLER
+ help
+ Enable this to support the Rockchip USB TYPEC PHY.
+
+config PHY_ROCKCHIP_USB
+ tristate "Rockchip USB2 PHY Driver"
+ depends on ARCH_ROCKCHIP && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip USB 2.0 PHY.
diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
new file mode 100644
index 000000000000..bd0acdf38e0f
--- /dev/null
+++ b/drivers/phy/rockchip/Makefile
@@ -0,0 +1,6 @@
+obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
+obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
+obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o
+obj-$(CONFIG_PHY_ROCKCHIP_PCIE) += phy-rockchip-pcie.o
+obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o
+obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/rockchip/phy-rockchip-dp.c
index 8b267a746576..8b267a746576 100644
--- a/drivers/phy/phy-rockchip-dp.c
+++ b/drivers/phy/rockchip/phy-rockchip-dp.c
diff --git a/drivers/phy/phy-rockchip-emmc.c b/drivers/phy/rockchip/phy-rockchip-emmc.c
index f1b24f18e9b2..f1b24f18e9b2 100644
--- a/drivers/phy/phy-rockchip-emmc.c
+++ b/drivers/phy/rockchip/phy-rockchip-emmc.c
diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 8efe78a49916..8efe78a49916 100644
--- a/drivers/phy/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
diff --git a/drivers/phy/phy-rockchip-pcie.c b/drivers/phy/rockchip/phy-rockchip-pcie.c
index 6904633cad68..6904633cad68 100644
--- a/drivers/phy/phy-rockchip-pcie.c
+++ b/drivers/phy/rockchip/phy-rockchip-pcie.c
diff --git a/drivers/phy/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
index 7cfb0f8995de..7cfb0f8995de 100644
--- a/drivers/phy/phy-rockchip-typec.c
+++ b/drivers/phy/rockchip/phy-rockchip-typec.c
diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/rockchip/phy-rockchip-usb.c
index 3378eeb7a562..3378eeb7a562 100644
--- a/drivers/phy/phy-rockchip-usb.c
+++ b/drivers/phy/rockchip/phy-rockchip-usb.c
diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
new file mode 100644
index 000000000000..b7e0645a7bd9
--- /dev/null
+++ b/drivers/phy/samsung/Kconfig
@@ -0,0 +1,95 @@
+#
+# Phy drivers for Samsung platforms
+#
+config PHY_EXYNOS_DP_VIDEO
+ tristate "EXYNOS SoC series Display Port PHY driver"
+ depends on OF
+ depends on ARCH_EXYNOS || COMPILE_TEST
+ default ARCH_EXYNOS
+ select GENERIC_PHY
+ help
+ Support for Display Port PHY found on Samsung EXYNOS SoCs.
+
+config PHY_EXYNOS_MIPI_VIDEO
+ tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
+ depends on HAS_IOMEM
+ depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
+ select GENERIC_PHY
+ default y if ARCH_S5PV210 || ARCH_EXYNOS
+ help
+ Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
+ and EXYNOS SoCs.
+
+config PHY_EXYNOS_PCIE
+ bool "Exynos PCIe PHY driver"
+ depends on OF && (ARCH_EXYNOS || COMPILE_TEST)
+ select GENERIC_PHY
+ help
+ Enable PCIe PHY support for Exynos SoC series.
+ This driver provides PHY interface for Exynos PCIe controller.
+
+config PHY_SAMSUNG_USB2
+ tristate "Samsung USB 2.0 PHY driver"
+ depends on HAS_IOMEM
+ depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
+ select GENERIC_PHY
+ select MFD_SYSCON
+ default ARCH_EXYNOS
+ help
+ Enable this to support the Samsung USB 2.0 PHY driver for Samsung
+ SoCs. This driver provides the interface for USB 2.0 PHY. Support
+ for particular PHYs will be enabled based on the SoC type in addition
+ to this driver.
+
+config PHY_EXYNOS4210_USB2
+ bool
+ depends on PHY_SAMSUNG_USB2
+ default CPU_EXYNOS4210
+
+config PHY_EXYNOS4X12_USB2
+ bool
+ depends on PHY_SAMSUNG_USB2
+ default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
+
+config PHY_EXYNOS5250_USB2
+ bool
+ depends on PHY_SAMSUNG_USB2
+ default SOC_EXYNOS5250 || SOC_EXYNOS5420
+
+config PHY_S5PV210_USB2
+ bool "Support for S5PV210"
+ depends on PHY_SAMSUNG_USB2
+ depends on ARCH_S5PV210
+ help
+ Enable USB PHY support for S5PV210. This option requires that Samsung
+ USB 2.0 PHY driver is enabled and means that support for this
+ particular SoC is compiled in the driver. In case of S5PV210 two phys
+ are available - device and host.
+
+config PHY_EXYNOS5_USBDRD
+ tristate "Exynos5 SoC series USB DRD PHY driver"
+ depends on ARCH_EXYNOS && OF
+ depends on HAS_IOMEM
+ depends on USB_DWC3_EXYNOS
+ select GENERIC_PHY
+ select MFD_SYSCON
+ default y
+ help
+ Enable USB DRD PHY support for Exynos 5 SoC series.
+ This driver provides PHY interface for USB 3.0 DRD controller
+ present on Exynos5 SoC series.
+
+config PHY_EXYNOS5250_SATA
+ tristate "Exynos5250 Sata SerDes/PHY driver"
+ depends on SOC_EXYNOS5250
+ depends on HAS_IOMEM
+ depends on OF
+ select GENERIC_PHY
+ select I2C
+ select I2C_S3C2410
+ select MFD_SYSCON
+ help
+ Enable this to support SATA SerDes/Phy found on Samsung's
+ Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
+ SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
+ port to accept one SATA device.
diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile
new file mode 100644
index 000000000000..20d7f2424772
--- /dev/null
+++ b/drivers/phy/samsung/Makefile
@@ -0,0 +1,11 @@
+obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
+obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
+obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o
+obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
+phy-exynos-usb2-y += phy-samsung-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
+obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
+obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/samsung/phy-exynos-dp-video.c
index bb3279dbf88c..bb3279dbf88c 100644
--- a/drivers/phy/phy-exynos-dp-video.c
+++ b/drivers/phy/samsung/phy-exynos-dp-video.c
diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/samsung/phy-exynos-mipi-video.c
index c198886f80a3..c198886f80a3 100644
--- a/drivers/phy/phy-exynos-mipi-video.c
+++ b/drivers/phy/samsung/phy-exynos-mipi-video.c
diff --git a/drivers/phy/phy-exynos-pcie.c b/drivers/phy/samsung/phy-exynos-pcie.c
index a89c12faff39..a89c12faff39 100644
--- a/drivers/phy/phy-exynos-pcie.c
+++ b/drivers/phy/samsung/phy-exynos-pcie.c
diff --git a/drivers/phy/phy-exynos4210-usb2.c b/drivers/phy/samsung/phy-exynos4210-usb2.c
index 1f50e1004828..1f50e1004828 100644
--- a/drivers/phy/phy-exynos4210-usb2.c
+++ b/drivers/phy/samsung/phy-exynos4210-usb2.c
diff --git a/drivers/phy/phy-exynos4x12-usb2.c b/drivers/phy/samsung/phy-exynos4x12-usb2.c
index 7f27a91acf87..7f27a91acf87 100644
--- a/drivers/phy/phy-exynos4x12-usb2.c
+++ b/drivers/phy/samsung/phy-exynos4x12-usb2.c
diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
index 7c41daa2c625..7c41daa2c625 100644
--- a/drivers/phy/phy-exynos5-usbdrd.c
+++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
diff --git a/drivers/phy/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c
index 60e13afcd9b8..60e13afcd9b8 100644
--- a/drivers/phy/phy-exynos5250-sata.c
+++ b/drivers/phy/samsung/phy-exynos5250-sata.c
diff --git a/drivers/phy/phy-exynos5250-usb2.c b/drivers/phy/samsung/phy-exynos5250-usb2.c
index aad806272305..aad806272305 100644
--- a/drivers/phy/phy-exynos5250-usb2.c
+++ b/drivers/phy/samsung/phy-exynos5250-usb2.c
diff --git a/drivers/phy/phy-s5pv210-usb2.c b/drivers/phy/samsung/phy-s5pv210-usb2.c
index f6f72339bbc3..f6f72339bbc3 100644
--- a/drivers/phy/phy-s5pv210-usb2.c
+++ b/drivers/phy/samsung/phy-s5pv210-usb2.c
diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/samsung/phy-samsung-usb2.c
index 1d22d93b552d..1d22d93b552d 100644
--- a/drivers/phy/phy-samsung-usb2.c
+++ b/drivers/phy/samsung/phy-samsung-usb2.c
diff --git a/drivers/phy/phy-samsung-usb2.h b/drivers/phy/samsung/phy-samsung-usb2.h
index 6563e7ca0ac4..6563e7ca0ac4 100644
--- a/drivers/phy/phy-samsung-usb2.h
+++ b/drivers/phy/samsung/phy-samsung-usb2.h
diff --git a/drivers/phy/st/Kconfig b/drivers/phy/st/Kconfig
new file mode 100644
index 000000000000..0814d3f87ec6
--- /dev/null
+++ b/drivers/phy/st/Kconfig
@@ -0,0 +1,33 @@
+#
+# Phy drivers for STMicro platforms
+#
+config PHY_MIPHY28LP
+ tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
+ depends on ARCH_STI
+ select GENERIC_PHY
+ help
+ Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
+ that is part of STMicroelectronics STiH407 SoC.
+
+config PHY_ST_SPEAR1310_MIPHY
+ tristate "ST SPEAR1310-MIPHY driver"
+ select GENERIC_PHY
+ depends on MACH_SPEAR1310 || COMPILE_TEST
+ help
+ Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
+
+config PHY_ST_SPEAR1340_MIPHY
+ tristate "ST SPEAR1340-MIPHY driver"
+ select GENERIC_PHY
+ depends on MACH_SPEAR1340 || COMPILE_TEST
+ help
+ Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
+
+config PHY_STIH407_USB
+ tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
+ depends on RESET_CONTROLLER
+ depends on ARCH_STI || COMPILE_TEST
+ select GENERIC_PHY
+ help
+ Enable this support to enable the picoPHY device used by USB2
+ and USB3 controllers on STMicroelectronics STiH407 SoC families.
diff --git a/drivers/phy/st/Makefile b/drivers/phy/st/Makefile
new file mode 100644
index 000000000000..e2adfe2166d2
--- /dev/null
+++ b/drivers/phy/st/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o
+obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
+obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
+obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o
diff --git a/drivers/phy/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c
index 213e2e15339c..213e2e15339c 100644
--- a/drivers/phy/phy-miphy28lp.c
+++ b/drivers/phy/st/phy-miphy28lp.c
diff --git a/drivers/phy/phy-spear1310-miphy.c b/drivers/phy/st/phy-spear1310-miphy.c
index ed67e98e54ca..ed67e98e54ca 100644
--- a/drivers/phy/phy-spear1310-miphy.c
+++ b/drivers/phy/st/phy-spear1310-miphy.c
diff --git a/drivers/phy/phy-spear1340-miphy.c b/drivers/phy/st/phy-spear1340-miphy.c
index 97280c0cf612..97280c0cf612 100644
--- a/drivers/phy/phy-spear1340-miphy.c
+++ b/drivers/phy/st/phy-spear1340-miphy.c
diff --git a/drivers/phy/phy-stih407-usb.c b/drivers/phy/st/phy-stih407-usb.c
index b1f44ab669fb..b1f44ab669fb 100644
--- a/drivers/phy/phy-stih407-usb.c
+++ b/drivers/phy/st/phy-stih407-usb.c
diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig
new file mode 100644
index 000000000000..20503562666c
--- /dev/null
+++ b/drivers/phy/ti/Kconfig
@@ -0,0 +1,78 @@
+#
+# Phy drivers for TI platforms
+#
+config PHY_DA8XX_USB
+ tristate "TI DA8xx USB PHY Driver"
+ depends on ARCH_DAVINCI_DA8XX
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Enable this to support the USB PHY on DA8xx SoCs.
+
+ This driver controls both the USB 1.1 PHY and the USB 2.0 PHY.
+
+config PHY_DM816X_USB
+ tristate "TI dm816x USB PHY driver"
+ depends on ARCH_OMAP2PLUS
+ depends on USB_SUPPORT
+ select GENERIC_PHY
+ select USB_PHY
+ help
+ Enable this for dm816x USB to work.
+
+config OMAP_CONTROL_PHY
+ tristate "OMAP CONTROL PHY Driver"
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
+ help
+ Enable this to add support for the PHY part present in the control
+ module. This driver has API to power on the USB2 PHY and to write to
+ the mailbox. The mailbox is present only in omap4 and the register to
+ power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
+ additional register to power on USB3 PHY/SATA PHY/PCIE PHY
+ (PIPE3 PHY).
+
+config OMAP_USB2
+ tristate "OMAP USB2 PHY Driver"
+ depends on ARCH_OMAP2PLUS
+ depends on USB_SUPPORT
+ select GENERIC_PHY
+ select USB_PHY
+ select OMAP_CONTROL_PHY
+ depends on OMAP_OCP2SCP
+ help
+ Enable this to support the transceiver that is part of SOC. This
+ driver takes care of all the PHY functionality apart from comparator.
+ The USB OTG controller communicates with the comparator using this
+ driver.
+
+config TI_PIPE3
+ tristate "TI PIPE3 PHY Driver"
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
+ select GENERIC_PHY
+ select OMAP_CONTROL_PHY
+ depends on OMAP_OCP2SCP
+ help
+ Enable this to support the PIPE3 PHY that is part of TI SOCs. This
+ driver takes care of all the PHY functionality apart from comparator.
+ This driver interacts with the "OMAP Control PHY Driver" to power
+ on/off the PHY.
+
+config PHY_TUSB1210
+ tristate "TI TUSB1210 ULPI PHY module"
+ depends on USB_ULPI_BUS
+ select GENERIC_PHY
+ help
+ Support for TI TUSB1210 USB ULPI PHY.
+
+config TWL4030_USB
+ tristate "TWL4030 USB Transceiver Driver"
+ depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
+ depends on USB_SUPPORT
+ depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y'
+ select GENERIC_PHY
+ select USB_PHY
+ help
+ Enable this to support the USB OTG transceiver on TWL4030
+ family chips (including the TWL5030 and TPS659x0 devices).
+ This transceiver supports high and full speed devices plus,
+ in host mode, low speed.
diff --git a/drivers/phy/ti/Makefile b/drivers/phy/ti/Makefile
new file mode 100644
index 000000000000..0cc3a1a557a3
--- /dev/null
+++ b/drivers/phy/ti/Makefile
@@ -0,0 +1,7 @@
+obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o
+obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
+obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o
+obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
+obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
+obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
+obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
diff --git a/drivers/phy/phy-da8xx-usb.c b/drivers/phy/ti/phy-da8xx-usb.c
index 1b82bff6330f..1b82bff6330f 100644
--- a/drivers/phy/phy-da8xx-usb.c
+++ b/drivers/phy/ti/phy-da8xx-usb.c
diff --git a/drivers/phy/phy-dm816x-usb.c b/drivers/phy/ti/phy-dm816x-usb.c
index cbcce7cf0028..cbcce7cf0028 100644
--- a/drivers/phy/phy-dm816x-usb.c
+++ b/drivers/phy/ti/phy-dm816x-usb.c
diff --git a/drivers/phy/phy-omap-control.c b/drivers/phy/ti/phy-omap-control.c
index e9c41b3fa0ee..e9c41b3fa0ee 100644
--- a/drivers/phy/phy-omap-control.c
+++ b/drivers/phy/ti/phy-omap-control.c
diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c
index fe909fd8144f..fe909fd8144f 100644
--- a/drivers/phy/phy-omap-usb2.c
+++ b/drivers/phy/ti/phy-omap-usb2.c
diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c
index 9c84d32c6f60..9c84d32c6f60 100644
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/ti/phy-ti-pipe3.c
diff --git a/drivers/phy/phy-tusb1210.c b/drivers/phy/ti/phy-tusb1210.c
index bb3fb031c478..bb3fb031c478 100644
--- a/drivers/phy/phy-tusb1210.c
+++ b/drivers/phy/ti/phy-tusb1210.c
diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/ti/phy-twl4030-usb.c
index 2990b3965460..2990b3965460 100644
--- a/drivers/phy/phy-twl4030-usb.c
+++ b/drivers/phy/ti/phy-twl4030-usb.c