diff options
323 files changed, 10495 insertions, 9849 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index c8baaf53594a..f093e59cbe5f 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -32,7 +32,7 @@ Date: January 2008 KernelVersion: 2.6.25 Contact: Sarah Sharp <sarah.a.sharp@intel.com> Description: - If CONFIG_PM and CONFIG_USB_SUSPEND are enabled, then this file + If CONFIG_PM_RUNTIME is enabled then this file is present. When read, it returns the total time (in msec) that the USB device has been connected to the machine. This file is read-only. @@ -45,7 +45,7 @@ Date: January 2008 KernelVersion: 2.6.25 Contact: Sarah Sharp <sarah.a.sharp@intel.com> Description: - If CONFIG_PM and CONFIG_USB_SUSPEND are enabled, then this file + If CONFIG_PM_RUNTIME is enabled then this file is present. When read, it returns the total time (in msec) that the USB device has been active, i.e. not in a suspended state. This file is read-only. @@ -187,7 +187,7 @@ What: /sys/bus/usb/devices/.../power/usb2_hardware_lpm Date: September 2011 Contact: Andiry Xu <andiry.xu@amd.com> Description: - If CONFIG_USB_SUSPEND is set and a USB 2.0 lpm-capable device + If CONFIG_PM_RUNTIME is set and a USB 2.0 lpm-capable device is plugged in to a xHCI host which support link PM, it will perform a LPM test; if the test is passed and host supports USB2 hardware LPM (xHCI 1.0 feature), USB2 hardware LPM will diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt index 5778b9c83bd8..1c04a4c9515f 100644 --- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt +++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt @@ -11,6 +11,7 @@ Optional properties: that indicate usb controller index - vbus-supply: regulator for vbus - disable-over-current: disable over current detect +- external-vbus-divider: enables off-chip resistor divider for Vbus Examples: usb@02184000 { /* USB OTG */ @@ -20,4 +21,5 @@ usb@02184000 { /* USB OTG */ fsl,usbphy = <&usbphy1>; fsl,usbmisc = <&usbmisc 0>; disable-over-current; + external-vbus-divider; }; diff --git a/Documentation/devicetree/bindings/usb/ehci-omap.txt b/Documentation/devicetree/bindings/usb/ehci-omap.txt new file mode 100644 index 000000000000..485a9a1efa7a --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ehci-omap.txt @@ -0,0 +1,32 @@ +OMAP HS USB EHCI controller + +This device is usually the child of the omap-usb-host +Documentation/devicetree/bindings/mfd/omap-usb-host.txt + +Required properties: + +- compatible: should be "ti,ehci-omap" +- reg: should contain one register range i.e. start and length +- interrupts: description of the interrupt line + +Optional properties: + +- phys: list of phandles to PHY nodes. + This property is required if at least one of the ports are in + PHY mode i.e. OMAP_EHCI_PORT_MODE_PHY + +To specify the port mode, see +Documentation/devicetree/bindings/mfd/omap-usb-host.txt + +Example for OMAP4: + +usbhsehci: ehci@4a064c00 { + compatible = "ti,ehci-omap", "usb-ehci"; + reg = <0x4a064c00 0x400>; + interrupts = <0 77 0x4>; +}; + +&usbhsehci { + phys = <&hsusb1_phy 0 &hsusb3_phy>; +}; + diff --git a/Documentation/devicetree/bindings/usb/ohci-omap3.txt b/Documentation/devicetree/bindings/usb/ohci-omap3.txt new file mode 100644 index 000000000000..14ab42812a8e --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ohci-omap3.txt @@ -0,0 +1,15 @@ +OMAP HS USB OHCI controller (OMAP3 and later) + +Required properties: + +- compatible: should be "ti,ohci-omap3" +- reg: should contain one register range i.e. start and length +- interrupts: description of the interrupt line + +Example for OMAP4: + +usbhsohci: ohci@4a064800 { + compatible = "ti,ohci-omap3", "usb-ohci"; + reg = <0x4a064800 0x400>; + interrupts = <0 76 0x4>; +}; diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index 1ef0ce71f8fa..662f0f1d2315 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -8,10 +8,10 @@ OMAP MUSB GLUE and disconnect. - multipoint : Should be "1" indicating the musb controller supports multipoint. This is a MUSB configuration-specific setting. - - num_eps : Specifies the number of endpoints. This is also a + - num-eps : Specifies the number of endpoints. This is also a MUSB configuration-specific setting. Should be set to "16" - - ram_bits : Specifies the ram address size. Should be set to "12" - - interface_type : This is a board specific setting to describe the type of + - ram-bits : Specifies the ram address size. Should be set to "12" + - interface-type : This is a board specific setting to describe the type of interface between the controller and the phy. It should be "0" or "1" specifying ULPI and UTMI respectively. - mode : Should be "3" to represent OTG. "1" signifies HOST and "2" @@ -29,18 +29,46 @@ usb_otg_hs: usb_otg_hs@4a0ab000 { ti,hwmods = "usb_otg_hs"; ti,has-mailbox; multipoint = <1>; - num_eps = <16>; - ram_bits = <12>; + num-eps = <16>; + ram-bits = <12>; ctrl-module = <&omap_control_usb>; }; Board specific device node entry &usb_otg_hs { - interface_type = <1>; + interface-type = <1>; mode = <3>; power = <50>; }; +OMAP DWC3 GLUE + - compatible : Should be "ti,dwc3" + - ti,hwmods : Should be "usb_otg_ss" + - reg : Address and length of the register set for the device. + - interrupts : The irq number of this device that is used to interrupt the + MPU + - #address-cells, #size-cells : Must be present if the device has sub-nodes + - utmi-mode : controls the source of UTMI/PIPE status for VBUS and OTG ID. + It should be set to "1" for HW mode and "2" for SW mode. + - ranges: the child address space are mapped 1:1 onto the parent address space + +Sub-nodes: +The dwc3 core should be added as subnode to omap dwc3 glue. +- dwc3 : + The binding details of dwc3 can be found in: + Documentation/devicetree/bindings/usb/dwc3.txt + +omap_dwc3 { + compatible = "ti,dwc3"; + ti,hwmods = "usb_otg_ss"; + reg = <0x4a020000 0x1ff>; + interrupts = <0 93 4>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges; +}; + OMAP CONTROL USB Required properties: diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt index 033194934f64..f575302e5173 100644 --- a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt +++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt @@ -1,20 +1,25 @@ -* Samsung's usb phy transceiver +SAMSUNG USB-PHY controllers -The Samsung's phy transceiver is used for controlling usb phy for -s3c-hsotg as well as ehci-s5p and ohci-exynos usb controllers -across Samsung SOCs. +** Samsung's usb 2.0 phy transceiver + +The Samsung's usb 2.0 phy transceiver is used for controlling +usb 2.0 phy for s3c-hsotg as well as ehci-s5p and ohci-exynos +usb controllers across Samsung SOCs. TODO: Adding the PHY binding with controller(s) according to the under developement generic PHY driver. Required properties: Exynos4210: -- compatible : should be "samsung,exynos4210-usbphy" +- compatible : should be "samsung,exynos4210-usb2phy" - reg : base physical address of the phy registers and length of memory mapped region. +- clocks: Clock IDs array as required by the controller. +- clock-names: names of clock correseponding IDs clock property as requested + by the controller driver. Exynos5250: -- compatible : should be "samsung,exynos5250-usbphy" +- compatible : should be "samsung,exynos5250-usb2phy" - reg : base physical address of the phy registers and length of memory mapped region. @@ -44,12 +49,69 @@ Example: usbphy@125B0000 { #address-cells = <1>; #size-cells = <1>; - compatible = "samsung,exynos4210-usbphy"; + compatible = "samsung,exynos4210-usb2phy"; reg = <0x125B0000 0x100>; ranges; + clocks = <&clock 2>, <&clock 305>; + clock-names = "xusbxti", "otg"; + usbphy-sys { /* USB device and host PHY_CONTROL registers */ reg = <0x10020704 0x8>; }; }; + + +** Samsung's usb 3.0 phy transceiver + +Starting exynso5250, Samsung's SoC have usb 3.0 phy transceiver +which is used for controlling usb 3.0 phy for dwc3-exynos usb 3.0 +controllers across Samsung SOCs. + +Required properties: + +Exynos5250: +- compatible : should be "samsung,exynos5250-usb3phy" +- reg : base physical address of the phy registers and length of memory mapped + region. +- clocks: Clock IDs array as required by the controller. +- clock-names: names of clocks correseponding to IDs in the clock property + as requested by the controller driver. + +Optional properties: +- #address-cells: should be '1' when usbphy node has a child node with 'reg' + property. +- #size-cells: should be '1' when usbphy node has a child node with 'reg' + property. +- ranges: allows valid translation between child's address space and parent's + address space. + +- The child node 'usbphy-sys' to the node 'usbphy' is for the system controller + interface for usb-phy. It should provide the following information required by + usb-phy controller to control phy. + - reg : base physical address of PHY_CONTROL registers. + The size of this register is the total sum of size of all PHY_CONTROL + registers that the SoC has. For example, the size will be + '0x4' in case we have only one PHY_CONTROL register (e.g. + OTHERS register in S3C64XX or USB_PHY_CONTROL register in S5PV210) + and, '0x8' in case we have two PHY_CONTROL registers (e.g. + USBDEVICE_PHY_CONTROL and USBHOST_PHY_CONTROL registers in exynos4x). + and so on. + +Example: + usbphy@12100000 { + compatible = "samsung,exynos5250-usb3phy"; + reg = <0x12100000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&clock 1>, <&clock 286>; + clock-names = "ext_xtal", "usbdrd30"; + + usbphy-sys { + /* USB device and host PHY_CONTROL registers */ + reg = <0x10040704 0x8>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt new file mode 100644 index 000000000000..d7e272671c7e --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt @@ -0,0 +1,34 @@ +USB NOP PHY + +Required properties: +- compatible: should be usb-nop-xceiv + +Optional properties: +- clocks: phandle to the PHY clock. Use as per Documentation/devicetree + /bindings/clock/clock-bindings.txt + This property is required if clock-frequency is specified. + +- clock-names: Should be "main_clk" + +- clock-frequency: the clock frequency (in Hz) that the PHY clock must + be configured to. + +- vcc-supply: phandle to the regulator that provides RESET to the PHY. + +- reset-supply: phandle to the regulator that provides power to the PHY. + +Example: + + hsusb1_phy { + compatible = "usb-nop-xceiv"; + clock-frequency = <19200000>; + clocks = <&osc 0>; + clock-names = "main_clk"; + vcc-supply = <&hsusb1_vcc_regulator>; + reset-supply = <&hsusb1_reset_regulator>; + }; + +hsusb1_phy is a NOP USB PHY device that gets its clock from an oscillator +and expects that clock to be configured to 19.2MHz by the NOP PHY driver. +hsusb1_vcc_regulator provides power to the PHY and hsusb1_reset_regulator +controls RESET. diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 3210540f8bd3..237acab169dd 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -131,6 +131,7 @@ Code Seq#(hex) Include File Comments 'H' 40-4F sound/hdspm.h conflict! 'H' 40-4F sound/hdsp.h conflict! 'H' 90 sound/usb/usx2y/usb_stream.h +'H' A0 uapi/linux/usb/cdc-wdm.h 'H' C0-F0 net/bluetooth/hci.h conflict! 'H' C0-DF net/bluetooth/hidp/hidp.h conflict! 'H' C0-DF net/bluetooth/cmtp/cmtp.h conflict! diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt index 4204eb01fd38..1392b61d6ebe 100644 --- a/Documentation/usb/power-management.txt +++ b/Documentation/usb/power-management.txt @@ -33,6 +33,10 @@ built with CONFIG_USB_SUSPEND enabled (which depends on CONFIG_PM_RUNTIME). System PM support is present only if the kernel was built with CONFIG_SUSPEND or CONFIG_HIBERNATION enabled. +(Starting with the 3.10 kernel release, dynamic PM support for USB is +present whenever the kernel was built with CONFIG_PM_RUNTIME enabled. +The CONFIG_USB_SUSPEND option has been eliminated.) + What is Remote Wakeup? ---------------------- @@ -206,10 +210,8 @@ initialized to 5. (The idle-delay values for already existing devices will not be affected.) Setting the initial default idle-delay to -1 will prevent any -autosuspend of any USB device. This is a simple alternative to -disabling CONFIG_USB_SUSPEND and rebuilding the kernel, and it has the -added benefit of allowing you to enable autosuspend for selected -devices. +autosuspend of any USB device. This has the benefit of allowing you +then to enable autosuspend for selected devices. Warnings diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1cacda426a0e..bbddefea77bb 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -549,6 +549,8 @@ config ARCH_IXP4XX select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI select NEED_MACH_IO_H + select USB_EHCI_BIG_ENDIAN_MMIO + select USB_EHCI_BIG_ENDIAN_DESC help Support for Intel's IXP4XX (XScale) family of processors. diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index e36b01025321..088d6c11a0fa 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -188,6 +188,7 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_PHY=y CONFIG_USB_MXS_PHY=y CONFIG_USB_STORAGE=y CONFIG_MMC=y diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index 92386b20bd09..afa7249fac6e 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig @@ -134,6 +134,7 @@ CONFIG_SND_DEBUG_VERBOSE=y # CONFIG_SND_SPI is not set CONFIG_SND_SOC=y CONFIG_USB=y +CONFIG_USB_PHY=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 6a99e30f81d2..87924d671115 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -120,6 +120,7 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_HOST=y CONFIG_USB_STORAGE=y +CONFIG_USB_PHY=y CONFIG_USB_MXS_PHY=y CONFIG_MMC=y CONFIG_MMC_MXS=y diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 42eab9a2a0fd..7e0ebb64a7f9 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -195,6 +195,7 @@ CONFIG_SND_SOC=y CONFIG_SND_OMAP_SOC=y # CONFIG_USB_HID is not set CONFIG_USB=y +CONFIG_USB_PHY=y CONFIG_USB_DEBUG=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c index b81cc569a8dd..6af40662a449 100644 --- a/arch/arm/mach-exynos/setup-usb-phy.c +++ b/arch/arm/mach-exynos/setup-usb-phy.c @@ -204,9 +204,9 @@ static int exynos4210_usb_phy1_exit(struct platform_device *pdev) int s5p_usb_phy_init(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_DEVICE) + if (type == USB_PHY_TYPE_DEVICE) return exynos4210_usb_phy0_init(pdev); - else if (type == S5P_USB_PHY_HOST) + else if (type == USB_PHY_TYPE_HOST) return exynos4210_usb_phy1_init(pdev); return -EINVAL; @@ -214,9 +214,9 @@ int s5p_usb_phy_init(struct platform_device *pdev, int type) int s5p_usb_phy_exit(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_DEVICE) + if (type == USB_PHY_TYPE_DEVICE) return exynos4210_usb_phy0_exit(pdev); - else if (type == S5P_USB_PHY_HOST) + else if (type == USB_PHY_TYPE_HOST) return exynos4210_usb_phy1_exit(pdev); return -EINVAL; diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 9f64d5632e07..76901f4ce611 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -223,13 +223,7 @@ static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = { }; #if defined(CONFIG_USB_EHCI_MV) -static char *pxa168_sph_clock_name[] = { - [0] = "PXA168-USBCLK", -}; - static struct mv_usb_platform_data pxa168_sph_pdata = { - .clknum = 1, - .clkname = pxa168_sph_clock_name, .mode = MV_USB_MODE_HOST, .phy_init = pxa_usb_phy_init, .phy_deinit = pxa_usb_phy_deinit, diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index 22a9058f9f4d..6528a5fa6a26 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -162,13 +162,7 @@ static struct i2c_board_info ttc_dkb_i2c_info[] = { #ifdef CONFIG_USB_SUPPORT #if defined(CONFIG_USB_MV_UDC) || defined(CONFIG_USB_EHCI_MV_U2O) -static char *pxa910_usb_clock_name[] = { - [0] = "U2OCLK", -}; - static struct mv_usb_platform_data ttc_usb_pdata = { - .clknum = 1, - .clkname = pxa910_usb_clock_name, .vbus = NULL, .mode = MV_USB_MODE_OTG, .otg_force_a_bus_req = 1, diff --git a/arch/arm/mach-s3c64xx/setup-usb-phy.c b/arch/arm/mach-s3c64xx/setup-usb-phy.c index c8174d95339b..ca960bda02fd 100644 --- a/arch/arm/mach-s3c64xx/setup-usb-phy.c +++ b/arch/arm/mach-s3c64xx/setup-usb-phy.c @@ -76,7 +76,7 @@ static int s3c_usb_otgphy_exit(struct platform_device *pdev) int s5p_usb_phy_init(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_DEVICE) + if (type == USB_PHY_TYPE_DEVICE) return s3c_usb_otgphy_init(pdev); return -EINVAL; @@ -84,7 +84,7 @@ int s5p_usb_phy_init(struct platform_device *pdev, int type) int s5p_usb_phy_exit(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_DEVICE) + if (type == USB_PHY_TYPE_DEVICE) return s3c_usb_otgphy_exit(pdev); return -EINVAL; diff --git a/arch/arm/mach-s5pv210/setup-usb-phy.c b/arch/arm/mach-s5pv210/setup-usb-phy.c index 356a0900af03..b2ee5333f89c 100644 --- a/arch/arm/mach-s5pv210/setup-usb-phy.c +++ b/arch/arm/mach-s5pv210/setup-usb-phy.c @@ -80,7 +80,7 @@ static int s5pv210_usb_otgphy_exit(struct platform_device *pdev) int s5p_usb_phy_init(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_DEVICE) + if (type == USB_PHY_TYPE_DEVICE) return s5pv210_usb_otgphy_init(pdev); return -EINVAL; @@ -88,7 +88,7 @@ int s5p_usb_phy_init(struct platform_device *pdev, int type) int s5p_usb_phy_exit(struct platform_device *pdev, int type) { - if (type == S5P_USB_PHY_DEVICE) + if (type == USB_PHY_TYPE_DEVICE) return s5pv210_usb_otgphy_exit(pdev); return -EINVAL; diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index f2ec0777cfbe..ff8b7ba9b93c 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -169,7 +169,7 @@ static int usbhsf_get_id(struct platform_device *pdev) return USBHS_GADGET; } -static void usbhsf_power_ctrl(struct platform_device *pdev, +static int usbhsf_power_ctrl(struct platform_device *pdev, void __iomem *base, int enable) { struct usbhsf_private *priv = usbhsf_get_priv(pdev); @@ -223,6 +223,8 @@ static void usbhsf_power_ctrl(struct platform_device *pdev, clk_disable(priv->pci); /* usb work around */ clk_disable(priv->usb24); /* usb work around */ } + + return 0; } static int usbhsf_get_vbus(struct platform_device *pdev) @@ -239,7 +241,7 @@ static irqreturn_t usbhsf_interrupt(int irq, void *data) return IRQ_HANDLED; } -static void usbhsf_hardware_exit(struct platform_device *pdev) +static int usbhsf_hardware_exit(struct platform_device *pdev) { struct usbhsf_private *priv = usbhsf_get_priv(pdev); @@ -264,6 +266,8 @@ static void usbhsf_hardware_exit(struct platform_device *pdev) priv->usbh_base = NULL; free_irq(IRQ7, pdev); + + return 0; } static int usbhsf_hardware_init(struct platform_device *pdev) diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index 7f3a6b7e7b7c..a385f570bbfc 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -155,12 +155,14 @@ static int usbhs_get_vbus(struct platform_device *pdev) return !((1 << 7) & __raw_readw(priv->cr2)); } -static void usbhs_phy_reset(struct platform_device *pdev) +static int usbhs_phy_reset(struct platform_device *pdev) { struct usbhs_private *priv = usbhs_get_priv(pdev); /* init phy */ __raw_writew(0x8a0a, priv->cr2); + + return 0; } static int usbhs_get_id(struct platform_device *pdev) @@ -202,7 +204,7 @@ static int usbhs_hardware_init(struct platform_device *pdev) return 0; } -static void usbhs_hardware_exit(struct platform_device *pdev) +static int usbhs_hardware_exit(struct platform_device *pdev) { struct usbhs_private *priv = usbhs_get_priv(pdev); @@ -210,6 +212,8 @@ static void usbhs_hardware_exit(struct platform_device *pdev) __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy); free_irq(IRQ15, pdev); + + return 0; } static u32 usbhs_pipe_cfg[] = { diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index db968a585ff0..979237c18dad 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -596,12 +596,14 @@ static int usbhs_get_vbus(struct platform_device *pdev) return usbhs_is_connected(usbhs_get_priv(pdev)); } -static void usbhs_phy_reset(struct platform_device *pdev) +static int usbhs_phy_reset(struct platform_device *pdev) { struct usbhs_private *priv = usbhs_get_priv(pdev); /* init phy */ __raw_writew(0x8a0a, priv->usbcrcaddr); + + return 0; } static int usbhs0_get_id(struct platform_device *pdev) @@ -628,11 +630,13 @@ static int usbhs0_hardware_init(struct platform_device *pdev) return 0; } -static void usbhs0_hardware_exit(struct platform_device *pdev) +static int usbhs0_hardware_exit(struct platform_device *pdev) { struct usbhs_private *priv = usbhs_get_priv(pdev); cancel_delayed_work_sync(&priv->work); + + return 0; } static struct usbhs_private usbhs0_private = { @@ -735,7 +739,7 @@ static int usbhs1_hardware_init(struct platform_device *pdev) return 0; } -static void usbhs1_hardware_exit(struct platform_device *pdev) +static int usbhs1_hardware_exit(struct platform_device *pdev) { struct usbhs_private *priv = usbhs_get_priv(pdev); @@ -743,6 +747,8 @@ static void usbhs1_hardware_exit(struct platform_device *pdev) __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr); free_irq(IRQ8, pdev); + + return 0; } static int usbhs1_get_id(struct platform_device *pdev) diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index d1c4893894ce..dbc653ea851c 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -18,8 +18,8 @@ config ARCH_TEGRA_2x_SOC select PL310_ERRATA_727915 if CACHE_L2X0 select PL310_ERRATA_769419 if CACHE_L2X0 select USB_ARCH_HAS_EHCI if USB_SUPPORT - select USB_ULPI if USB - select USB_ULPI_VIEWPORT if USB_SUPPORT + select USB_ULPI if USB_PHY + select USB_ULPI_VIEWPORT if USB_PHY help Support for NVIDIA Tegra AP20 and T20 processors, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller @@ -37,8 +37,8 @@ config ARCH_TEGRA_3x_SOC select PINCTRL_TEGRA30 select PL310_ERRATA_769419 if CACHE_L2X0 select USB_ARCH_HAS_EHCI if USB_SUPPORT - select USB_ULPI if USB - select USB_ULPI_VIEWPORT if USB_SUPPORT + select USB_ULPI if USB_PHY + select USB_ULPI_VIEWPORT if USB_PHY help Support for NVIDIA Tegra T30 processor family, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller diff --git a/arch/arm/plat-samsung/include/plat/usb-phy.h b/arch/arm/plat-samsung/include/plat/usb-phy.h index 959bcdb03a25..ab34dfadb7f9 100644 --- a/arch/arm/plat-samsung/include/plat/usb-phy.h +++ b/arch/arm/plat-samsung/include/plat/usb-phy.h @@ -11,10 +11,7 @@ #ifndef __PLAT_SAMSUNG_USB_PHY_H #define __PLAT_SAMSUNG_USB_PHY_H __FILE__ -enum s5p_usb_phy_type { - S5P_USB_PHY_DEVICE, - S5P_USB_PHY_HOST, -}; +#include <linux/usb/samsung_usb_phy.h> extern int s5p_usb_phy_init(struct platform_device *pdev, int type); extern int s5p_usb_phy_exit(struct platform_device *pdev, int type); diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 51244bf97271..3a7b3954ce1b 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -404,6 +404,8 @@ config PMC_MSP select IRQ_CPU select SERIAL_8250 select SERIAL_8250_CONSOLE + select USB_EHCI_BIG_ENDIAN_MMIO + select USB_EHCI_BIG_ENDIAN_DESC help This adds support for the PMC-Sierra family of Multi-Service Processor System-On-A-Chips. These parts include a number @@ -1433,6 +1435,7 @@ config CPU_CAVIUM_OCTEON select CPU_SUPPORTS_HUGEPAGES select LIBFDT select USE_OF + select USB_EHCI_BIG_ENDIAN_MMIO help The Cavium Octeon processor is a highly integrated chip containing many ethernet hardware widgets for networking tasks. The processor diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 0effe9f5a1ea..7be93367d92f 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -274,6 +274,8 @@ config 440EPX select IBM_EMAC_EMAC4 select IBM_EMAC_RGMII select IBM_EMAC_ZMII + select USB_EHCI_BIG_ENDIAN_MMIO + select USB_EHCI_BIG_ENDIAN_DESC config 440GRX bool diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig index c16999802ecf..381a592826a2 100644 --- a/arch/powerpc/platforms/512x/Kconfig +++ b/arch/powerpc/platforms/512x/Kconfig @@ -7,6 +7,8 @@ config PPC_MPC512x select PPC_PCI_CHOICE select FSL_PCI if PCI select ARCH_WANT_OPTIONAL_GPIOLIB + select USB_EHCI_BIG_ENDIAN_MMIO + select USB_EHCI_BIG_ENDIAN_DESC config MPC5121_ADS bool "Freescale MPC5121E ADS" diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index aaff7671101b..764530c85aa9 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -254,11 +254,13 @@ static int usbhs_get_id(struct platform_device *pdev) return gpio_get_value(GPIO_PTB3); } -static void usbhs_phy_reset(struct platform_device *pdev) +static int usbhs_phy_reset(struct platform_device *pdev) { /* enable vbus if HOST */ if (!gpio_get_value(GPIO_PTB3)) gpio_set_value(GPIO_PTB5, 1); + + return 0; } static struct renesas_usbhs_platform_info usbhs_info = { diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 3d361f236308..66dc562950ae 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -407,6 +407,8 @@ config SERIAL_CONSOLE config SPARC_LEON bool "Sparc Leon processor family" depends on SPARC32 + select USB_EHCI_BIG_ENDIAN_MMIO + select USB_EHCI_BIG_ENDIAN_DESC ---help--- If you say Y here if you are running on a SPARC-LEON processor. The LEON processor is a synthesizable VHDL model of the diff --git a/drivers/Makefile b/drivers/Makefile index 4865ed24708a..33360de63650 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -79,7 +79,7 @@ obj-$(CONFIG_ATA_OVER_ETH) += block/aoe/ obj-$(CONFIG_PARIDE) += block/paride/ obj-$(CONFIG_TC) += tc/ obj-$(CONFIG_UWB) += uwb/ -obj-$(CONFIG_USB_OTG_UTILS) += usb/ +obj-$(CONFIG_USB_PHY) += usb/ obj-$(CONFIG_USB) += usb/ obj-$(CONFIG_PCI) += usb/ obj-$(CONFIG_USB_GADGET) += usb/ diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 8e0c4bf94ebc..1f9e56bfeaa0 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -1493,7 +1493,7 @@ static int hid_suspend(struct usb_interface *intf, pm_message_t message) { struct hid_device *hid = usb_get_intfdata(intf); struct usbhid_device *usbhid = hid->driver_data; - int status; + int status = 0; bool driver_suspended = false; if (PMSG_IS_AUTO(message)) { @@ -1520,19 +1520,15 @@ static int hid_suspend(struct usb_interface *intf, pm_message_t message) } } else { - if (hid->driver && hid->driver->suspend) { + /* TODO: resume() might need to handle suspend failure */ + if (hid->driver && hid->driver->suspend) status = hid->driver->suspend(hid, message); - if (status < 0) - return status; - } driver_suspended = true; spin_lock_irq(&usbhid->lock); set_bit(HID_SUSPENDED, &usbhid->iofl); spin_unlock_irq(&usbhid->lock); - if (usbhid_wait_io(hid) < 0) { + if (usbhid_wait_io(hid) < 0) status = -EIO; - goto failed; - } } hid_cancel_delayed_stuff(usbhid); @@ -1544,7 +1540,7 @@ static int hid_suspend(struct usb_interface *intf, pm_message_t message) goto failed; } dev_dbg(&intf->dev, "suspend\n"); - return 0; + return status; failed: hid_resume_common(hid, driver_suspended); diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c index 6bd91676d2cb..32a76059e7da 100644 --- a/drivers/net/usb/cdc_mbim.c +++ b/drivers/net/usb/cdc_mbim.c @@ -323,6 +323,11 @@ static int cdc_mbim_suspend(struct usb_interface *intf, pm_message_t message) goto error; } + /* + * Both usbnet_suspend() and subdriver->suspend() MUST return 0 + * in system sleep context, otherwise, the resume callback has + * to recover device from previous suspend failure. + */ ret = usbnet_suspend(intf, message); if (ret < 0) goto error; diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 2a3579f67910..5a88e72090ce 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -374,6 +374,11 @@ static int qmi_wwan_suspend(struct usb_interface *intf, pm_message_t message) struct qmi_wwan_state *info = (void *)&dev->data; int ret; + /* + * Both usbnet_suspend() and subdriver->suspend() MUST return 0 + * in system sleep context, otherwise, the resume callback has + * to recover device from previous suspend failure. + */ ret = usbnet_suspend(intf, message); if (ret < 0) goto err; diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index 1a15ec14c386..75409748c774 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -2015,7 +2015,11 @@ static int smsc75xx_suspend(struct usb_interface *intf, pm_message_t message) ret = smsc75xx_enter_suspend0(dev); done: - if (ret) + /* + * TODO: resume() might need to handle the suspend failure + * in system sleep + */ + if (ret && PMSG_IS_AUTO(message)) usbnet_resume(intf); return ret; } diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index e6d2dea1373c..3f38ba868f61 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1660,7 +1660,11 @@ static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message) ret = smsc95xx_enter_suspend0(dev); done: - if (ret) + /* + * TODO: resume() might need to handle the suspend failure + * in system sleep + */ + if (ret && PMSG_IS_AUTO(message)) usbnet_resume(intf); return ret; } diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 9e00c389e777..ffe02fb7cbc7 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -254,7 +254,7 @@ config BATTERY_RX51 config CHARGER_ISP1704 tristate "ISP1704 USB Charger Detection" - depends on USB_OTG_UTILS + depends on USB_PHY help Say Y to enable support for USB Charger Detection with ISP1707/ISP1704 USB transceivers. diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c index 7df7c5facc10..0c52e2a0d90c 100644 --- a/drivers/power/pda_power.c +++ b/drivers/power/pda_power.c @@ -35,7 +35,7 @@ static struct timer_list supply_timer; static struct timer_list polling_timer; static int polling; -#ifdef CONFIG_USB_OTG_UTILS +#if IS_ENABLED(CONFIG_USB_PHY) static struct usb_phy *transceiver; static struct notifier_block otg_nb; #endif @@ -218,7 +218,7 @@ static void polling_timer_func(unsigned long unused) jiffies + msecs_to_jiffies(pdata->polling_interval)); } -#ifdef CONFIG_USB_OTG_UTILS +#if IS_ENABLED(CONFIG_USB_PHY) static int otg_is_usb_online(void) { return (transceiver->last_event == USB_EVENT_VBUS || @@ -315,7 +315,7 @@ static int pda_power_probe(struct platform_device *pdev) pda_psy_usb.num_supplicants = pdata->num_supplicants; } -#ifdef CONFIG_USB_OTG_UTILS +#if IS_ENABLED(CONFIG_USB_PHY) transceiver = usb_get_phy(USB_PHY_TYPE_USB2); if (!IS_ERR_OR_NULL(transceiver)) { if (!pdata->is_usb_online) @@ -367,7 +367,7 @@ static int pda_power_probe(struct platform_device *pdev) } } -#ifdef CONFIG_USB_OTG_UTILS +#if IS_ENABLED(CONFIG_USB_PHY) if (!IS_ERR_OR_NULL(transceiver) && pdata->use_otg_notifier) { otg_nb.notifier_call = otg_handle_notification; ret = usb_register_notifier(transceiver, &otg_nb); @@ -391,7 +391,7 @@ static int pda_power_probe(struct platform_device *pdev) return 0; -#ifdef CONFIG_USB_OTG_UTILS +#if IS_ENABLED(CONFIG_USB_PHY) otg_reg_notifier_failed: if (pdata->is_usb_online && usb_irq) free_irq(usb_irq->start, &pda_psy_usb); @@ -402,7 +402,7 @@ usb_irq_failed: usb_supply_failed: if (pdata->is_ac_online && ac_irq) free_irq(ac_irq->start, &pda_psy_ac); -#ifdef CONFIG_USB_OTG_UTILS +#if IS_ENABLED(CONFIG_USB_PHY) if (!IS_ERR_OR_NULL(transceiver)) usb_put_phy(transceiver); #endif @@ -437,7 +437,7 @@ static int pda_power_remove(struct platform_device *pdev) power_supply_unregister(&pda_psy_usb); if (pdata->is_ac_online) power_supply_unregister(&pda_psy_ac); -#ifdef CONFIG_USB_OTG_UTILS +#if IS_ENABLED(CONFIG_USB_PHY) if (!IS_ERR_OR_NULL(transceiver)) usb_put_phy(transceiver); #endif diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 640ae6c6d2d2..92e1dc94ecc8 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -122,9 +122,9 @@ config USB To compile this driver as a module, choose M here: the module will be called usbcore. -source "drivers/usb/core/Kconfig" +if USB -source "drivers/usb/dwc3/Kconfig" +source "drivers/usb/core/Kconfig" source "drivers/usb/mon/Kconfig" @@ -134,8 +134,6 @@ source "drivers/usb/host/Kconfig" source "drivers/usb/musb/Kconfig" -source "drivers/usb/chipidea/Kconfig" - source "drivers/usb/renesas_usbhs/Kconfig" source "drivers/usb/class/Kconfig" @@ -144,12 +142,19 @@ source "drivers/usb/storage/Kconfig" source "drivers/usb/image/Kconfig" +endif + +source "drivers/usb/dwc3/Kconfig" + +source "drivers/usb/chipidea/Kconfig" + comment "USB port drivers" - depends on USB + +if USB config USB_USS720 tristate "USS720 parport driver" - depends on USB && PARPORT + depends on PARPORT select PARPORT_NOT_PC ---help--- This driver is for USB parallel port adapters that use the Lucent @@ -180,12 +185,12 @@ source "drivers/usb/serial/Kconfig" source "drivers/usb/misc/Kconfig" -source "drivers/usb/phy/Kconfig" - source "drivers/usb/atm/Kconfig" -source "drivers/usb/gadget/Kconfig" +endif # USB + +source "drivers/usb/phy/Kconfig" -source "drivers/usb/otg/Kconfig" +source "drivers/usb/gadget/Kconfig" endif # USB_SUPPORT diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 8f5ebced5df0..c41feba8d5c0 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -6,8 +6,6 @@ obj-$(CONFIG_USB) += core/ -obj-$(CONFIG_USB_OTG_UTILS) += otg/ - obj-$(CONFIG_USB_DWC3) += dwc3/ obj-$(CONFIG_USB_MON) += mon/ @@ -46,7 +44,7 @@ obj-$(CONFIG_USB_MICROTEK) += image/ obj-$(CONFIG_USB_SERIAL) += serial/ obj-$(CONFIG_USB) += misc/ -obj-$(CONFIG_USB_OTG_UTILS) += phy/ +obj-$(CONFIG_USB_PHY) += phy/ obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/ obj-$(CONFIG_USB_ATM) += atm/ diff --git a/drivers/usb/atm/Kconfig b/drivers/usb/atm/Kconfig index be0b8daac9c7..0f922942a07a 100644 --- a/drivers/usb/atm/Kconfig +++ b/drivers/usb/atm/Kconfig @@ -4,7 +4,7 @@ menuconfig USB_ATM tristate "USB DSL modem support" - depends on USB && ATM + depends on ATM select CRC32 default n help diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c index 35f10bfe15db..d3527dd8b90c 100644 --- a/drivers/usb/atm/usbatm.c +++ b/drivers/usb/atm/usbatm.c @@ -672,9 +672,6 @@ static int usbatm_atm_send(struct atm_vcc *vcc, struct sk_buff *skb) struct usbatm_control *ctrl = UDSL_SKB(skb); int err; - vdbg(&instance->usb_intf->dev, "%s called (skb 0x%p, len %u)", __func__, - skb, skb->len); - /* racy disconnection check - fine */ if (!instance || instance->disconnected) { #ifdef DEBUG @@ -684,6 +681,9 @@ static int usbatm_atm_send(struct atm_vcc *vcc, struct sk_buff *skb) goto fail; } + vdbg(&instance->usb_intf->dev, "%s called (skb 0x%p, len %u)", __func__, + skb, skb->len); + if (vcc->qos.aal != ATM_AAL5) { atm_rldbg(instance, "%s: unsupported ATM type %d!\n", __func__, vcc->qos.aal); err = -EINVAL; diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile index d92ca325b104..4ab83e98219b 100644 --- a/drivers/usb/chipidea/Makefile +++ b/drivers/usb/chipidea/Makefile @@ -17,5 +17,5 @@ ifneq ($(CONFIG_PCI),) endif ifneq ($(CONFIG_OF_DEVICE),) - obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_imx.o usbmisc_imx6q.o + obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_imx.o usbmisc_imx.o endif diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index e25d1263da13..b0a6bce064ca 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -21,6 +21,7 @@ /****************************************************************************** * DEFINE *****************************************************************************/ +#define TD_PAGE_COUNT 5 #define CI13XXX_PAGE_SIZE 4096ul /* page size for TD's */ #define ENDPT_MAX 32 @@ -129,6 +130,7 @@ struct hw_bank { * @vbus_active: is VBUS active * @transceiver: pointer to USB PHY, if any * @hcd: pointer to usb_hcd for ehci host driver + * @debugfs: root dentry for this controller in debugfs */ struct ci13xxx { struct device *dev; @@ -139,7 +141,6 @@ struct ci13xxx { enum ci_role role; bool is_otg; struct work_struct work; - struct work_struct vbus_work; struct workqueue_struct *wq; struct dma_pool *qh_pool; @@ -165,6 +166,7 @@ struct ci13xxx { bool global_phy; struct usb_phy *transceiver; struct usb_hcd *hcd; + struct dentry *debugfs; }; static inline struct ci_role_driver *ci_role(struct ci13xxx *ci) @@ -234,19 +236,6 @@ enum ci13xxx_regs { }; /** - * ffs_nr: find first (least significant) bit set - * @x: the word to search - * - * This function returns bit number (instead of position) - */ -static inline int ffs_nr(u32 x) -{ - int n = ffs(x); - - return n ? n-1 : 32; -} - -/** * hw_read: reads from a hw register * @reg: register index * @mask: bitfield mask @@ -304,7 +293,7 @@ static inline u32 hw_test_and_write(struct ci13xxx *ci, enum ci13xxx_regs reg, u32 val = hw_read(ci, reg, ~0); hw_write(ci, reg, mask, data); - return (val & mask) >> ffs_nr(mask); + return (val & mask) >> __ffs(mask); } int hw_device_reset(struct ci13xxx *ci, u32 mode); diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c index 8c291220be7f..8faec9dbbb84 100644 --- a/drivers/usb/chipidea/ci13xxx_imx.c +++ b/drivers/usb/chipidea/ci13xxx_imx.c @@ -79,6 +79,9 @@ int usbmisc_get_init_data(struct device *dev, struct usbmisc_usb_device *usbdev) if (of_find_property(np, "disable-over-current", NULL)) usbdev->disable_oc = 1; + if (of_find_property(np, "external-vbus-divider", NULL)) + usbdev->evdo = 1; + return 0; } EXPORT_SYMBOL_GPL(usbmisc_get_init_data); @@ -202,6 +205,15 @@ static int ci13xxx_imx_probe(struct platform_device *pdev) goto err; } + if (usbmisc_ops && usbmisc_ops->post) { + ret = usbmisc_ops->post(&pdev->dev); + if (ret) { + dev_err(&pdev->dev, + "usbmisc post failed, ret=%d\n", ret); + goto put_np; + } + } + data->ci_pdev = plat_ci; platform_set_drvdata(pdev, data); diff --git a/drivers/usb/chipidea/ci13xxx_imx.h b/drivers/usb/chipidea/ci13xxx_imx.h index 9cd2e910b1ca..550bfa457620 100644 --- a/drivers/usb/chipidea/ci13xxx_imx.h +++ b/drivers/usb/chipidea/ci13xxx_imx.h @@ -13,6 +13,8 @@ struct usbmisc_ops { /* It's called once when probe a usb device */ int (*init)(struct device *dev); + /* It's called once after adding a usb device */ + int (*post)(struct device *dev); }; struct usbmisc_usb_device { @@ -20,6 +22,7 @@ struct usbmisc_usb_device { int index; unsigned int disable_oc:1; /* over current detect disabled */ + unsigned int evdo:1; /* set external vbus divider option */ }; int usbmisc_set_ops(const struct usbmisc_ops *ops); diff --git a/drivers/usb/chipidea/ci13xxx_pci.c b/drivers/usb/chipidea/ci13xxx_pci.c index 9b227e39299a..4e1fc61b9d95 100644 --- a/drivers/usb/chipidea/ci13xxx_pci.c +++ b/drivers/usb/chipidea/ci13xxx_pci.c @@ -23,17 +23,17 @@ /****************************************************************************** * PCI block *****************************************************************************/ -struct ci13xxx_platform_data pci_platdata = { +static struct ci13xxx_platform_data pci_platdata = { .name = UDC_DRIVER_NAME, .capoffset = DEF_CAPOFFSET, }; -struct ci13xxx_platform_data langwell_pci_platdata = { +static struct ci13xxx_platform_data langwell_pci_platdata = { .name = UDC_DRIVER_NAME, .capoffset = 0, }; -struct ci13xxx_platform_data penwell_pci_platdata = { +static struct ci13xxx_platform_data penwell_pci_platdata = { .name = UDC_DRIVER_NAME, .capoffset = 0, .power_budget = 200, diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 57cae1f897b2..450107e5f657 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -51,15 +51,12 @@ */ #include <linux/delay.h> #include <linux/device.h> -#include <linux/dmapool.h> #include <linux/dma-mapping.h> -#include <linux/init.h> #include <linux/platform_device.h> #include <linux/module.h> #include <linux/idr.h> #include <linux/interrupt.h> #include <linux/io.h> -#include <linux/irq.h> #include <linux/kernel.h> #include <linux/slab.h> #include <linux/pm_runtime.h> @@ -158,7 +155,7 @@ int hw_port_test_set(struct ci13xxx *ci, u8 mode) if (mode > TEST_MODE_MAX) return -EINVAL; - hw_write(ci, OP_PORTSC, PORTSC_PTC, mode << ffs_nr(PORTSC_PTC)); + hw_write(ci, OP_PORTSC, PORTSC_PTC, mode << __ffs(PORTSC_PTC)); return 0; } @@ -169,7 +166,7 @@ int hw_port_test_set(struct ci13xxx *ci, u8 mode) */ u8 hw_port_test_get(struct ci13xxx *ci) { - return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> ffs_nr(PORTSC_PTC); + return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> __ffs(PORTSC_PTC); } static int hw_device_init(struct ci13xxx *ci, void __iomem *base) @@ -181,11 +178,11 @@ static int hw_device_init(struct ci13xxx *ci, void __iomem *base) ci->hw_bank.cap = ci->hw_bank.abs; ci->hw_bank.cap += ci->platdata->capoffset; - ci->hw_bank.op = ci->hw_bank.cap + ioread8(ci->hw_bank.cap); + ci->hw_bank.op = ci->hw_bank.cap + (ioread32(ci->hw_bank.cap) & 0xff); hw_alloc_regmap(ci, false); reg = hw_read(ci, CAP_HCCPARAMS, HCCPARAMS_LEN) >> - ffs_nr(HCCPARAMS_LEN); + __ffs(HCCPARAMS_LEN); ci->hw_bank.lpm = reg; hw_alloc_regmap(ci, !!reg); ci->hw_bank.size = ci->hw_bank.op - ci->hw_bank.abs; @@ -193,7 +190,7 @@ static int hw_device_init(struct ci13xxx *ci, void __iomem *base) ci->hw_bank.size /= sizeof(u32); reg = hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DEN) >> - ffs_nr(DCCPARAMS_DEN); + __ffs(DCCPARAMS_DEN); ci->hw_ep_max = reg * 2; /* cache hw ENDPT_MAX */ if (ci->hw_ep_max > ENDPT_MAX) @@ -283,38 +280,6 @@ static void ci_role_work(struct work_struct *work) } } -static ssize_t show_role(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct ci13xxx *ci = dev_get_drvdata(dev); - - return sprintf(buf, "%s\n", ci_role(ci)->name); -} - -static ssize_t store_role(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct ci13xxx *ci = dev_get_drvdata(dev); - enum ci_role role; - int ret; - - for (role = CI_ROLE_HOST; role < CI_ROLE_END; role++) - if (ci->roles[role] && !strcmp(buf, ci->roles[role]->name)) - break; - - if (role == CI_ROLE_END || role == ci->role) - return -EINVAL; - - ci_role_stop(ci); - ret = ci_role_start(ci, role); - if (ret) - return ret; - - return count; -} - -static DEVICE_ATTR(role, S_IRUSR | S_IWUSR, show_role, store_role); - static irqreturn_t ci_irq(int irq, void *data) { struct ci13xxx *ci = data; @@ -410,11 +375,9 @@ static int ci_hdrc_probe(struct platform_device *pdev) return -ENODEV; } - base = devm_request_and_ioremap(dev, res); - if (!base) { - dev_err(dev, "can't request and ioremap resource\n"); - return -ENOMEM; - } + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); ci = devm_kzalloc(dev, sizeof(*ci), GFP_KERNEL); if (!ci) { @@ -489,17 +452,14 @@ static int ci_hdrc_probe(struct platform_device *pdev) if (ret) goto stop; - ret = device_create_file(dev, &dev_attr_role); - if (ret) - goto rm_attr; - if (ci->is_otg) hw_write(ci, OP_OTGSC, OTGSC_IDIE, OTGSC_IDIE); - return ret; + ret = dbg_create_files(ci); + if (!ret) + return 0; -rm_attr: - device_remove_file(dev, &dev_attr_role); + free_irq(ci->irq, ci); stop: ci_role_stop(ci); rm_wq: @@ -513,9 +473,9 @@ static int ci_hdrc_remove(struct platform_device *pdev) { struct ci13xxx *ci = platform_get_drvdata(pdev); + dbg_remove_files(ci); flush_workqueue(ci->wq); destroy_workqueue(ci->wq); - device_remove_file(ci->dev, &dev_attr_role); free_irq(ci->irq, ci); ci_role_stop(ci); diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c index a62c4a47d52c..36a7063a6cba 100644 --- a/drivers/usb/chipidea/debug.c +++ b/drivers/usb/chipidea/debug.c @@ -1,590 +1,126 @@ -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/dmapool.h> -#include <linux/dma-mapping.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> #include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/pm_runtime.h> +#include <linux/device.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/uaccess.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> -#include <linux/usb/otg.h> -#include <linux/usb/chipidea.h> #include "ci.h" #include "udc.h" #include "bits.h" #include "debug.h" -/* Interrupt statistics */ -#define ISR_MASK 0x1F -static struct isr_statistics { - u32 test; - u32 ui; - u32 uei; - u32 pci; - u32 uri; - u32 sli; - u32 none; - struct { - u32 cnt; - u32 buf[ISR_MASK+1]; - u32 idx; - } hndl; -} isr_statistics; - -void dbg_interrupt(u32 intmask) -{ - if (!intmask) { - isr_statistics.none++; - return; - } - - isr_statistics.hndl.buf[isr_statistics.hndl.idx++] = intmask; - isr_statistics.hndl.idx &= ISR_MASK; - isr_statistics.hndl.cnt++; - - if (USBi_URI & intmask) - isr_statistics.uri++; - if (USBi_PCI & intmask) - isr_statistics.pci++; - if (USBi_UEI & intmask) - isr_statistics.uei++; - if (USBi_UI & intmask) - isr_statistics.ui++; - if (USBi_SLI & intmask) - isr_statistics.sli++; -} - /** - * hw_register_read: reads all device registers (execute without interruption) - * @buf: destination buffer - * @size: buffer size - * - * This function returns number of registers read + * ci_device_show: prints information about device capabilities and status */ -static size_t hw_register_read(struct ci13xxx *ci, u32 *buf, size_t size) +static int ci_device_show(struct seq_file *s, void *data) { - unsigned i; - - if (size > ci->hw_bank.size) - size = ci->hw_bank.size; - - for (i = 0; i < size; i++) - buf[i] = hw_read(ci, i * sizeof(u32), ~0); - - return size; -} - -/** - * hw_register_write: writes to register - * @addr: register address - * @data: register value - * - * This function returns an error code - */ -static int hw_register_write(struct ci13xxx *ci, u16 addr, u32 data) -{ - /* align */ - addr /= sizeof(u32); - - if (addr >= ci->hw_bank.size) - return -EINVAL; - - /* align */ - addr *= sizeof(u32); - - hw_write(ci, addr, ~0, data); - return 0; -} - -/** - * hw_intr_clear: disables interrupt & clears interrupt status (execute without - * interruption) - * @n: interrupt bit - * - * This function returns an error code - */ -static int hw_intr_clear(struct ci13xxx *ci, int n) -{ - if (n >= REG_BITS) - return -EINVAL; - - hw_write(ci, OP_USBINTR, BIT(n), 0); - hw_write(ci, OP_USBSTS, BIT(n), BIT(n)); - return 0; -} - -/** - * hw_intr_force: enables interrupt & forces interrupt status (execute without - * interruption) - * @n: interrupt bit - * - * This function returns an error code - */ -static int hw_intr_force(struct ci13xxx *ci, int n) -{ - if (n >= REG_BITS) - return -EINVAL; - - hw_write(ci, CAP_TESTMODE, TESTMODE_FORCE, TESTMODE_FORCE); - hw_write(ci, OP_USBINTR, BIT(n), BIT(n)); - hw_write(ci, OP_USBSTS, BIT(n), BIT(n)); - hw_write(ci, CAP_TESTMODE, TESTMODE_FORCE, 0); - return 0; -} - -/** - * show_device: prints information about device capabilities and status - * - * Check "device.h" for details - */ -static ssize_t show_device(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); + struct ci13xxx *ci = s->private; struct usb_gadget *gadget = &ci->gadget; - int n = 0; - if (attr == NULL || buf == NULL) { - dev_err(ci->dev, "[%s] EINVAL\n", __func__); + seq_printf(s, "speed = %d\n", gadget->speed); + seq_printf(s, "max_speed = %d\n", gadget->max_speed); + seq_printf(s, "is_otg = %d\n", gadget->is_otg); + seq_printf(s, "is_a_peripheral = %d\n", gadget->is_a_peripheral); + seq_printf(s, "b_hnp_enable = %d\n", gadget->b_hnp_enable); + seq_printf(s, "a_hnp_support = %d\n", gadget->a_hnp_support); + seq_printf(s, "a_alt_hnp_support = %d\n", gadget->a_alt_hnp_support); + seq_printf(s, "name = %s\n", + (gadget->name ? gadget->name : "")); + + if (!ci->driver) return 0; - } - - n += scnprintf(buf + n, PAGE_SIZE - n, "speed = %d\n", - gadget->speed); - n += scnprintf(buf + n, PAGE_SIZE - n, "max_speed = %d\n", - gadget->max_speed); - n += scnprintf(buf + n, PAGE_SIZE - n, "is_otg = %d\n", - gadget->is_otg); - n += scnprintf(buf + n, PAGE_SIZE - n, "is_a_peripheral = %d\n", - gadget->is_a_peripheral); - n += scnprintf(buf + n, PAGE_SIZE - n, "b_hnp_enable = %d\n", - gadget->b_hnp_enable); - n += scnprintf(buf + n, PAGE_SIZE - n, "a_hnp_support = %d\n", - gadget->a_hnp_support); - n += scnprintf(buf + n, PAGE_SIZE - n, "a_alt_hnp_support = %d\n", - gadget->a_alt_hnp_support); - n += scnprintf(buf + n, PAGE_SIZE - n, "name = %s\n", - (gadget->name ? gadget->name : "")); - - return n; -} -static DEVICE_ATTR(device, S_IRUSR, show_device, NULL); - -/** - * show_driver: prints information about attached gadget (if any) - * - * Check "device.h" for details - */ -static ssize_t show_driver(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); - struct usb_gadget_driver *driver = ci->driver; - int n = 0; - - if (attr == NULL || buf == NULL) { - dev_err(dev, "[%s] EINVAL\n", __func__); - return 0; - } - - if (driver == NULL) - return scnprintf(buf, PAGE_SIZE, - "There is no gadget attached!\n"); - n += scnprintf(buf + n, PAGE_SIZE - n, "function = %s\n", - (driver->function ? driver->function : "")); - n += scnprintf(buf + n, PAGE_SIZE - n, "max speed = %d\n", - driver->max_speed); + seq_printf(s, "gadget function = %s\n", + (ci->driver->function ? ci->driver->function : "")); + seq_printf(s, "gadget max speed = %d\n", ci->driver->max_speed); - return n; -} -static DEVICE_ATTR(driver, S_IRUSR, show_driver, NULL); - -/* Maximum event message length */ -#define DBG_DATA_MSG 64UL - -/* Maximum event messages */ -#define DBG_DATA_MAX 128UL - -/* Event buffer descriptor */ -static struct { - char (buf[DBG_DATA_MAX])[DBG_DATA_MSG]; /* buffer */ - unsigned idx; /* index */ - unsigned tty; /* print to console? */ - rwlock_t lck; /* lock */ -} dbg_data = { - .idx = 0, - .tty = 0, - .lck = __RW_LOCK_UNLOCKED(dbg_data.lck) -}; - -/** - * dbg_dec: decrements debug event index - * @idx: buffer index - */ -static void dbg_dec(unsigned *idx) -{ - *idx = (*idx - 1) & (DBG_DATA_MAX-1); -} - -/** - * dbg_inc: increments debug event index - * @idx: buffer index - */ -static void dbg_inc(unsigned *idx) -{ - *idx = (*idx + 1) & (DBG_DATA_MAX-1); -} - -/** - * dbg_print: prints the common part of the event - * @addr: endpoint address - * @name: event name - * @status: status - * @extra: extra information - */ -static void dbg_print(u8 addr, const char *name, int status, const char *extra) -{ - struct timeval tval; - unsigned int stamp; - unsigned long flags; - - write_lock_irqsave(&dbg_data.lck, flags); - - do_gettimeofday(&tval); - stamp = tval.tv_sec & 0xFFFF; /* 2^32 = 4294967296. Limit to 4096s */ - stamp = stamp * 1000000 + tval.tv_usec; - - scnprintf(dbg_data.buf[dbg_data.idx], DBG_DATA_MSG, - "%04X\t? %02X %-7.7s %4i ?\t%s\n", - stamp, addr, name, status, extra); - - dbg_inc(&dbg_data.idx); - - write_unlock_irqrestore(&dbg_data.lck, flags); - - if (dbg_data.tty != 0) - pr_notice("%04X\t? %02X %-7.7s %4i ?\t%s\n", - stamp, addr, name, status, extra); -} - -/** - * dbg_done: prints a DONE event - * @addr: endpoint address - * @td: transfer descriptor - * @status: status - */ -void dbg_done(u8 addr, const u32 token, int status) -{ - char msg[DBG_DATA_MSG]; - - scnprintf(msg, sizeof(msg), "%d %02X", - (int)(token & TD_TOTAL_BYTES) >> ffs_nr(TD_TOTAL_BYTES), - (int)(token & TD_STATUS) >> ffs_nr(TD_STATUS)); - dbg_print(addr, "DONE", status, msg); -} - -/** - * dbg_event: prints a generic event - * @addr: endpoint address - * @name: event name - * @status: status - */ -void dbg_event(u8 addr, const char *name, int status) -{ - if (name != NULL) - dbg_print(addr, name, status, ""); -} - -/* - * dbg_queue: prints a QUEUE event - * @addr: endpoint address - * @req: USB request - * @status: status - */ -void dbg_queue(u8 addr, const struct usb_request *req, int status) -{ - char msg[DBG_DATA_MSG]; - - if (req != NULL) { - scnprintf(msg, sizeof(msg), - "%d %d", !req->no_interrupt, req->length); - dbg_print(addr, "QUEUE", status, msg); - } -} - -/** - * dbg_setup: prints a SETUP event - * @addr: endpoint address - * @req: setup request - */ -void dbg_setup(u8 addr, const struct usb_ctrlrequest *req) -{ - char msg[DBG_DATA_MSG]; - - if (req != NULL) { - scnprintf(msg, sizeof(msg), - "%02X %02X %04X %04X %d", req->bRequestType, - req->bRequest, le16_to_cpu(req->wValue), - le16_to_cpu(req->wIndex), le16_to_cpu(req->wLength)); - dbg_print(addr, "SETUP", 0, msg); - } + return 0; } -/** - * show_events: displays the event buffer - * - * Check "device.h" for details - */ -static ssize_t show_events(struct device *dev, struct device_attribute *attr, - char *buf) +static int ci_device_open(struct inode *inode, struct file *file) { - unsigned long flags; - unsigned i, j, n = 0; - - if (attr == NULL || buf == NULL) { - dev_err(dev->parent, "[%s] EINVAL\n", __func__); - return 0; - } - - read_lock_irqsave(&dbg_data.lck, flags); - - i = dbg_data.idx; - for (dbg_dec(&i); i != dbg_data.idx; dbg_dec(&i)) { - n += strlen(dbg_data.buf[i]); - if (n >= PAGE_SIZE) { - n -= strlen(dbg_data.buf[i]); - break; - } - } - for (j = 0, dbg_inc(&i); j < n; dbg_inc(&i)) - j += scnprintf(buf + j, PAGE_SIZE - j, - "%s", dbg_data.buf[i]); - - read_unlock_irqrestore(&dbg_data.lck, flags); - - return n; + return single_open(file, ci_device_show, inode->i_private); } -/** - * store_events: configure if events are going to be also printed to console - * - * Check "device.h" for details - */ -static ssize_t store_events(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - unsigned tty; - - if (attr == NULL || buf == NULL) { - dev_err(dev, "[%s] EINVAL\n", __func__); - goto done; - } - - if (sscanf(buf, "%u", &tty) != 1 || tty > 1) { - dev_err(dev, "<1|0>: enable|disable console log\n"); - goto done; - } - - dbg_data.tty = tty; - dev_info(dev, "tty = %u", dbg_data.tty); - - done: - return count; -} -static DEVICE_ATTR(events, S_IRUSR | S_IWUSR, show_events, store_events); +static const struct file_operations ci_device_fops = { + .open = ci_device_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; /** - * show_inters: interrupt status, enable status and historic - * - * Check "device.h" for details + * ci_port_test_show: reads port test mode */ -static ssize_t show_inters(struct device *dev, struct device_attribute *attr, - char *buf) +static int ci_port_test_show(struct seq_file *s, void *data) { - struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); + struct ci13xxx *ci = s->private; unsigned long flags; - u32 intr; - unsigned i, j, n = 0; - - if (attr == NULL || buf == NULL) { - dev_err(ci->dev, "[%s] EINVAL\n", __func__); - return 0; - } + unsigned mode; spin_lock_irqsave(&ci->lock, flags); - - /*n += scnprintf(buf + n, PAGE_SIZE - n, - "status = %08x\n", hw_read_intr_status(ci)); - n += scnprintf(buf + n, PAGE_SIZE - n, - "enable = %08x\n", hw_read_intr_enable(ci));*/ - - n += scnprintf(buf + n, PAGE_SIZE - n, "*test = %d\n", - isr_statistics.test); - n += scnprintf(buf + n, PAGE_SIZE - n, "? ui = %d\n", - isr_statistics.ui); - n += scnprintf(buf + n, PAGE_SIZE - n, "? uei = %d\n", - isr_statistics.uei); - n += scnprintf(buf + n, PAGE_SIZE - n, "? pci = %d\n", - isr_statistics.pci); - n += scnprintf(buf + n, PAGE_SIZE - n, "? uri = %d\n", - isr_statistics.uri); - n += scnprintf(buf + n, PAGE_SIZE - n, "? sli = %d\n", - isr_statistics.sli); - n += scnprintf(buf + n, PAGE_SIZE - n, "*none = %d\n", - isr_statistics.none); - n += scnprintf(buf + n, PAGE_SIZE - n, "*hndl = %d\n", - isr_statistics.hndl.cnt); - - for (i = isr_statistics.hndl.idx, j = 0; j <= ISR_MASK; j++, i++) { - i &= ISR_MASK; - intr = isr_statistics.hndl.buf[i]; - - if (USBi_UI & intr) - n += scnprintf(buf + n, PAGE_SIZE - n, "ui "); - intr &= ~USBi_UI; - if (USBi_UEI & intr) - n += scnprintf(buf + n, PAGE_SIZE - n, "uei "); - intr &= ~USBi_UEI; - if (USBi_PCI & intr) - n += scnprintf(buf + n, PAGE_SIZE - n, "pci "); - intr &= ~USBi_PCI; - if (USBi_URI & intr) - n += scnprintf(buf + n, PAGE_SIZE - n, "uri "); - intr &= ~USBi_URI; - if (USBi_SLI & intr) - n += scnprintf(buf + n, PAGE_SIZE - n, "sli "); - intr &= ~USBi_SLI; - if (intr) - n += scnprintf(buf + n, PAGE_SIZE - n, "??? "); - if (isr_statistics.hndl.buf[i]) - n += scnprintf(buf + n, PAGE_SIZE - n, "\n"); - } - + mode = hw_port_test_get(ci); spin_unlock_irqrestore(&ci->lock, flags); - return n; -} - -/** - * store_inters: enable & force or disable an individual interrutps - * (to be used for test purposes only) - * - * Check "device.h" for details - */ -static ssize_t store_inters(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); - unsigned long flags; - unsigned en, bit; - - if (attr == NULL || buf == NULL) { - dev_err(ci->dev, "EINVAL\n"); - goto done; - } + seq_printf(s, "mode = %u\n", mode); - if (sscanf(buf, "%u %u", &en, &bit) != 2 || en > 1) { - dev_err(ci->dev, "<1|0> <bit>: enable|disable interrupt\n"); - goto done; - } - - spin_lock_irqsave(&ci->lock, flags); - if (en) { - if (hw_intr_force(ci, bit)) - dev_err(dev, "invalid bit number\n"); - else - isr_statistics.test++; - } else { - if (hw_intr_clear(ci, bit)) - dev_err(dev, "invalid bit number\n"); - } - spin_unlock_irqrestore(&ci->lock, flags); - - done: - return count; + return 0; } -static DEVICE_ATTR(inters, S_IRUSR | S_IWUSR, show_inters, store_inters); /** - * show_port_test: reads port test mode - * - * Check "device.h" for details + * ci_port_test_write: writes port test mode */ -static ssize_t show_port_test(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t ci_port_test_write(struct file *file, const char __user *ubuf, + size_t count, loff_t *ppos) { - struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); + struct seq_file *s = file->private_data; + struct ci13xxx *ci = s->private; unsigned long flags; unsigned mode; + char buf[32]; + int ret; - if (attr == NULL || buf == NULL) { - dev_err(ci->dev, "EINVAL\n"); - return 0; - } + if (copy_from_user(buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) + return -EFAULT; + + if (sscanf(buf, "%u", &mode) != 1) + return -EINVAL; spin_lock_irqsave(&ci->lock, flags); - mode = hw_port_test_get(ci); + ret = hw_port_test_set(ci, mode); spin_unlock_irqrestore(&ci->lock, flags); - return scnprintf(buf, PAGE_SIZE, "mode = %u\n", mode); + return ret ? ret : count; } -/** - * store_port_test: writes port test mode - * - * Check "device.h" for details - */ -static ssize_t store_port_test(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) +static int ci_port_test_open(struct inode *inode, struct file *file) { - struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); - unsigned long flags; - unsigned mode; - - if (attr == NULL || buf == NULL) { - dev_err(ci->dev, "[%s] EINVAL\n", __func__); - goto done; - } - - if (sscanf(buf, "%u", &mode) != 1) { - dev_err(ci->dev, "<mode>: set port test mode"); - goto done; - } - - spin_lock_irqsave(&ci->lock, flags); - if (hw_port_test_set(ci, mode)) - dev_err(ci->dev, "invalid mode\n"); - spin_unlock_irqrestore(&ci->lock, flags); - - done: - return count; + return single_open(file, ci_port_test_show, inode->i_private); } -static DEVICE_ATTR(port_test, S_IRUSR | S_IWUSR, - show_port_test, store_port_test); + +static const struct file_operations ci_port_test_fops = { + .open = ci_port_test_open, + .write = ci_port_test_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; /** - * show_qheads: DMA contents of all queue heads - * - * Check "device.h" for details + * ci_qheads_show: DMA contents of all queue heads */ -static ssize_t show_qheads(struct device *dev, struct device_attribute *attr, - char *buf) +static int ci_qheads_show(struct seq_file *s, void *data) { - struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); + struct ci13xxx *ci = s->private; unsigned long flags; - unsigned i, j, n = 0; + unsigned i, j; - if (attr == NULL || buf == NULL) { - dev_err(ci->dev, "[%s] EINVAL\n", __func__); + if (ci->role != CI_ROLE_GADGET) { + seq_printf(s, "not in gadget mode\n"); return 0; } @@ -593,209 +129,173 @@ static ssize_t show_qheads(struct device *dev, struct device_attribute *attr, struct ci13xxx_ep *mEpRx = &ci->ci13xxx_ep[i]; struct ci13xxx_ep *mEpTx = &ci->ci13xxx_ep[i + ci->hw_ep_max/2]; - n += scnprintf(buf + n, PAGE_SIZE - n, - "EP=%02i: RX=%08X TX=%08X\n", - i, (u32)mEpRx->qh.dma, (u32)mEpTx->qh.dma); - for (j = 0; j < (sizeof(struct ci13xxx_qh)/sizeof(u32)); j++) { - n += scnprintf(buf + n, PAGE_SIZE - n, - " %04X: %08X %08X\n", j, - *((u32 *)mEpRx->qh.ptr + j), - *((u32 *)mEpTx->qh.ptr + j)); - } + seq_printf(s, "EP=%02i: RX=%08X TX=%08X\n", + i, (u32)mEpRx->qh.dma, (u32)mEpTx->qh.dma); + for (j = 0; j < (sizeof(struct ci13xxx_qh)/sizeof(u32)); j++) + seq_printf(s, " %04X: %08X %08X\n", j, + *((u32 *)mEpRx->qh.ptr + j), + *((u32 *)mEpTx->qh.ptr + j)); } spin_unlock_irqrestore(&ci->lock, flags); - return n; + return 0; +} + +static int ci_qheads_open(struct inode *inode, struct file *file) +{ + return single_open(file, ci_qheads_show, inode->i_private); } -static DEVICE_ATTR(qheads, S_IRUSR, show_qheads, NULL); + +static const struct file_operations ci_qheads_fops = { + .open = ci_qheads_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; /** - * show_registers: dumps all registers - * - * Check "device.h" for details + * ci_requests_show: DMA contents of all requests currently queued (all endpts) */ -#define DUMP_ENTRIES 512 -static ssize_t show_registers(struct device *dev, - struct device_attribute *attr, char *buf) +static int ci_requests_show(struct seq_file *s, void *data) { - struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); + struct ci13xxx *ci = s->private; unsigned long flags; - u32 *dump; - unsigned i, k, n = 0; - - if (attr == NULL || buf == NULL) { - dev_err(ci->dev, "[%s] EINVAL\n", __func__); - return 0; - } + struct list_head *ptr = NULL; + struct ci13xxx_req *req = NULL; + unsigned i, j, qsize = sizeof(struct ci13xxx_td)/sizeof(u32); - dump = kmalloc(sizeof(u32) * DUMP_ENTRIES, GFP_KERNEL); - if (!dump) { - dev_err(ci->dev, "%s: out of memory\n", __func__); + if (ci->role != CI_ROLE_GADGET) { + seq_printf(s, "not in gadget mode\n"); return 0; } spin_lock_irqsave(&ci->lock, flags); - k = hw_register_read(ci, dump, DUMP_ENTRIES); - spin_unlock_irqrestore(&ci->lock, flags); + for (i = 0; i < ci->hw_ep_max; i++) + list_for_each(ptr, &ci->ci13xxx_ep[i].qh.queue) { + req = list_entry(ptr, struct ci13xxx_req, queue); - for (i = 0; i < k; i++) { - n += scnprintf(buf + n, PAGE_SIZE - n, - "reg[0x%04X] = 0x%08X\n", - i * (unsigned)sizeof(u32), dump[i]); - } - kfree(dump); + seq_printf(s, "EP=%02i: TD=%08X %s\n", + i % (ci->hw_ep_max / 2), (u32)req->dma, + ((i < ci->hw_ep_max/2) ? "RX" : "TX")); + + for (j = 0; j < qsize; j++) + seq_printf(s, " %04X: %08X\n", j, + *((u32 *)req->ptr + j)); + } + spin_unlock_irqrestore(&ci->lock, flags); - return n; + return 0; } -/** - * store_registers: writes value to register address - * - * Check "device.h" for details - */ -static ssize_t store_registers(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) +static int ci_requests_open(struct inode *inode, struct file *file) { - struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); - unsigned long addr, data, flags; + return single_open(file, ci_requests_show, inode->i_private); +} - if (attr == NULL || buf == NULL) { - dev_err(ci->dev, "[%s] EINVAL\n", __func__); - goto done; - } +static const struct file_operations ci_requests_fops = { + .open = ci_requests_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; - if (sscanf(buf, "%li %li", &addr, &data) != 2) { - dev_err(ci->dev, - "<addr> <data>: write data to register address\n"); - goto done; - } +static int ci_role_show(struct seq_file *s, void *data) +{ + struct ci13xxx *ci = s->private; - spin_lock_irqsave(&ci->lock, flags); - if (hw_register_write(ci, addr, data)) - dev_err(ci->dev, "invalid address range\n"); - spin_unlock_irqrestore(&ci->lock, flags); + seq_printf(s, "%s\n", ci_role(ci)->name); - done: - return count; + return 0; } -static DEVICE_ATTR(registers, S_IRUSR | S_IWUSR, - show_registers, store_registers); -/** - * show_requests: DMA contents of all requests currently queued (all endpts) - * - * Check "device.h" for details - */ -static ssize_t show_requests(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t ci_role_write(struct file *file, const char __user *ubuf, + size_t count, loff_t *ppos) { - struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); - unsigned long flags; - struct list_head *ptr = NULL; - struct ci13xxx_req *req = NULL; - unsigned i, j, n = 0, qSize = sizeof(struct ci13xxx_td)/sizeof(u32); - - if (attr == NULL || buf == NULL) { - dev_err(ci->dev, "[%s] EINVAL\n", __func__); - return 0; - } + struct seq_file *s = file->private_data; + struct ci13xxx *ci = s->private; + enum ci_role role; + char buf[8]; + int ret; + + if (copy_from_user(buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) + return -EFAULT; + + for (role = CI_ROLE_HOST; role < CI_ROLE_END; role++) + if (ci->roles[role] && + !strncmp(buf, ci->roles[role]->name, + strlen(ci->roles[role]->name))) + break; - spin_lock_irqsave(&ci->lock, flags); - for (i = 0; i < ci->hw_ep_max; i++) - list_for_each(ptr, &ci->ci13xxx_ep[i].qh.queue) - { - req = list_entry(ptr, struct ci13xxx_req, queue); + if (role == CI_ROLE_END || role == ci->role) + return -EINVAL; - n += scnprintf(buf + n, PAGE_SIZE - n, - "EP=%02i: TD=%08X %s\n", - i % ci->hw_ep_max/2, (u32)req->dma, - ((i < ci->hw_ep_max/2) ? "RX" : "TX")); + ci_role_stop(ci); + ret = ci_role_start(ci, role); - for (j = 0; j < qSize; j++) - n += scnprintf(buf + n, PAGE_SIZE - n, - " %04X: %08X\n", j, - *((u32 *)req->ptr + j)); - } - spin_unlock_irqrestore(&ci->lock, flags); + return ret ? ret : count; +} - return n; +static int ci_role_open(struct inode *inode, struct file *file) +{ + return single_open(file, ci_role_show, inode->i_private); } -static DEVICE_ATTR(requests, S_IRUSR, show_requests, NULL); + +static const struct file_operations ci_role_fops = { + .open = ci_role_open, + .write = ci_role_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; /** * dbg_create_files: initializes the attribute interface - * @dev: device + * @ci: device * * This function returns an error code */ -int dbg_create_files(struct device *dev) +int dbg_create_files(struct ci13xxx *ci) { - int retval = 0; - - if (dev == NULL) - return -EINVAL; - retval = device_create_file(dev, &dev_attr_device); - if (retval) - goto done; - retval = device_create_file(dev, &dev_attr_driver); - if (retval) - goto rm_device; - retval = device_create_file(dev, &dev_attr_events); - if (retval) - goto rm_driver; - retval = device_create_file(dev, &dev_attr_inters); - if (retval) - goto rm_events; - retval = device_create_file(dev, &dev_attr_port_test); - if (retval) - goto rm_inters; - retval = device_create_file(dev, &dev_attr_qheads); - if (retval) - goto rm_port_test; - retval = device_create_file(dev, &dev_attr_registers); - if (retval) - goto rm_qheads; - retval = device_create_file(dev, &dev_attr_requests); - if (retval) - goto rm_registers; - return 0; - - rm_registers: - device_remove_file(dev, &dev_attr_registers); - rm_qheads: - device_remove_file(dev, &dev_attr_qheads); - rm_port_test: - device_remove_file(dev, &dev_attr_port_test); - rm_inters: - device_remove_file(dev, &dev_attr_inters); - rm_events: - device_remove_file(dev, &dev_attr_events); - rm_driver: - device_remove_file(dev, &dev_attr_driver); - rm_device: - device_remove_file(dev, &dev_attr_device); - done: - return retval; + struct dentry *dent; + + ci->debugfs = debugfs_create_dir(dev_name(ci->dev), NULL); + if (!ci->debugfs) + return -ENOMEM; + + dent = debugfs_create_file("device", S_IRUGO, ci->debugfs, ci, + &ci_device_fops); + if (!dent) + goto err; + + dent = debugfs_create_file("port_test", S_IRUGO | S_IWUSR, ci->debugfs, + ci, &ci_port_test_fops); + if (!dent) + goto err; + + dent = debugfs_create_file("qheads", S_IRUGO, ci->debugfs, ci, + &ci_qheads_fops); + if (!dent) + goto err; + + dent = debugfs_create_file("requests", S_IRUGO, ci->debugfs, ci, + &ci_requests_fops); + if (!dent) + goto err; + + dent = debugfs_create_file("role", S_IRUGO | S_IWUSR, ci->debugfs, ci, + &ci_role_fops); + if (dent) + return 0; +err: + debugfs_remove_recursive(ci->debugfs); + return -ENOMEM; } /** * dbg_remove_files: destroys the attribute interface - * @dev: device - * - * This function returns an error code + * @ci: device */ -int dbg_remove_files(struct device *dev) +void dbg_remove_files(struct ci13xxx *ci) { - if (dev == NULL) - return -EINVAL; - device_remove_file(dev, &dev_attr_requests); - device_remove_file(dev, &dev_attr_registers); - device_remove_file(dev, &dev_attr_qheads); - device_remove_file(dev, &dev_attr_port_test); - device_remove_file(dev, &dev_attr_inters); - device_remove_file(dev, &dev_attr_events); - device_remove_file(dev, &dev_attr_driver); - device_remove_file(dev, &dev_attr_device); - return 0; + debugfs_remove_recursive(ci->debugfs); } diff --git a/drivers/usb/chipidea/debug.h b/drivers/usb/chipidea/debug.h index 80d96865775c..7ca6ca0a24a5 100644 --- a/drivers/usb/chipidea/debug.h +++ b/drivers/usb/chipidea/debug.h @@ -14,42 +14,16 @@ #define __DRIVERS_USB_CHIPIDEA_DEBUG_H #ifdef CONFIG_USB_CHIPIDEA_DEBUG -void dbg_interrupt(u32 intmask); -void dbg_done(u8 addr, const u32 token, int status); -void dbg_event(u8 addr, const char *name, int status); -void dbg_queue(u8 addr, const struct usb_request *req, int status); -void dbg_setup(u8 addr, const struct usb_ctrlrequest *req); -int dbg_create_files(struct device *dev); -int dbg_remove_files(struct device *dev); +int dbg_create_files(struct ci13xxx *ci); +void dbg_remove_files(struct ci13xxx *ci); #else -static inline void dbg_interrupt(u32 intmask) -{ -} - -static inline void dbg_done(u8 addr, const u32 token, int status) -{ -} - -static inline void dbg_event(u8 addr, const char *name, int status) -{ -} - -static inline void dbg_queue(u8 addr, const struct usb_request *req, int status) -{ -} - -static inline void dbg_setup(u8 addr, const struct usb_ctrlrequest *req) -{ -} - -static inline int dbg_create_files(struct device *dev) +static inline int dbg_create_files(struct ci13xxx *ci) { return 0; } -static inline int dbg_remove_files(struct device *dev) +static inline void dbg_remove_files(struct ci13xxx *ci) { - return 0; } #endif diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index f64fbea1cf20..519ead2443c5 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -13,14 +13,8 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/dmapool.h> -#include <linux/dma-mapping.h> #include <linux/err.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> +#include <linux/irqreturn.h> #include <linux/kernel.h> #include <linux/slab.h> #include <linux/pm_runtime.h> @@ -146,7 +140,7 @@ static int hw_ep_enable(struct ci13xxx *ci, int num, int dir, int type) if (dir) { mask = ENDPTCTRL_TXT; /* type */ - data = type << ffs_nr(mask); + data = type << __ffs(mask); mask |= ENDPTCTRL_TXS; /* unstall */ mask |= ENDPTCTRL_TXR; /* reset data toggle */ @@ -155,7 +149,7 @@ static int hw_ep_enable(struct ci13xxx *ci, int num, int dir, int type) data |= ENDPTCTRL_TXE; } else { mask = ENDPTCTRL_RXT; /* type */ - data = type << ffs_nr(mask); + data = type << __ffs(mask); mask |= ENDPTCTRL_RXS; /* unstall */ mask |= ENDPTCTRL_RXR; /* reset data toggle */ @@ -305,18 +299,6 @@ static u32 hw_test_and_clear_intr_active(struct ci13xxx *ci) return reg; } -static void hw_enable_vbus_intr(struct ci13xxx *ci) -{ - hw_write(ci, OP_OTGSC, OTGSC_AVVIS, OTGSC_AVVIS); - hw_write(ci, OP_OTGSC, OTGSC_AVVIE, OTGSC_AVVIE); - queue_work(ci->wq, &ci->vbus_work); -} - -static void hw_disable_vbus_intr(struct ci13xxx *ci) -{ - hw_write(ci, OP_OTGSC, OTGSC_AVVIE, 0); -} - /** * hw_test_and_clear_setup_guard: test & clear setup guard (execute without * interruption) @@ -349,7 +331,7 @@ static int hw_test_and_set_setup_guard(struct ci13xxx *ci) static void hw_usb_set_address(struct ci13xxx *ci, u8 value) { hw_write(ci, OP_DEVICEADDR, DEVICEADDR_USBADR, - value << ffs_nr(DEVICEADDR_USBADR)); + value << __ffs(DEVICEADDR_USBADR)); } /** @@ -383,16 +365,6 @@ static int hw_usb_reset(struct ci13xxx *ci) return 0; } -static void vbus_work(struct work_struct *work) -{ - struct ci13xxx *ci = container_of(work, struct ci13xxx, vbus_work); - - if (hw_read(ci, OP_OTGSC, OTGSC_AVV)) - usb_gadget_vbus_connect(&ci->gadget); - else - usb_gadget_vbus_disconnect(&ci->gadget); -} - /****************************************************************************** * UTIL block *****************************************************************************/ @@ -432,10 +404,10 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) return -ENOMEM; memset(mReq->zptr, 0, sizeof(*mReq->zptr)); - mReq->zptr->next = TD_TERMINATE; - mReq->zptr->token = TD_STATUS_ACTIVE; + mReq->zptr->next = cpu_to_le32(TD_TERMINATE); + mReq->zptr->token = cpu_to_le32(TD_STATUS_ACTIVE); if (!mReq->req.no_interrupt) - mReq->zptr->token |= TD_IOC; + mReq->zptr->token |= cpu_to_le32(TD_IOC); } ret = usb_gadget_map_request(&ci->gadget, &mReq->req, mEp->dir); if (ret) @@ -446,32 +418,37 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) * TODO - handle requests which spawns into several TDs */ memset(mReq->ptr, 0, sizeof(*mReq->ptr)); - mReq->ptr->token = length << ffs_nr(TD_TOTAL_BYTES); - mReq->ptr->token &= TD_TOTAL_BYTES; - mReq->ptr->token |= TD_STATUS_ACTIVE; + mReq->ptr->token = cpu_to_le32(length << __ffs(TD_TOTAL_BYTES)); + mReq->ptr->token &= cpu_to_le32(TD_TOTAL_BYTES); + mReq->ptr->token |= cpu_to_le32(TD_STATUS_ACTIVE); if (mReq->zptr) { - mReq->ptr->next = mReq->zdma; + mReq->ptr->next = cpu_to_le32(mReq->zdma); } else { - mReq->ptr->next = TD_TERMINATE; + mReq->ptr->next = cpu_to_le32(TD_TERMINATE); if (!mReq->req.no_interrupt) - mReq->ptr->token |= TD_IOC; + mReq->ptr->token |= cpu_to_le32(TD_IOC); + } + mReq->ptr->page[0] = cpu_to_le32(mReq->req.dma); + for (i = 1; i < TD_PAGE_COUNT; i++) { + u32 page = mReq->req.dma + i * CI13XXX_PAGE_SIZE; + page &= ~TD_RESERVED_MASK; + mReq->ptr->page[i] = cpu_to_le32(page); } - mReq->ptr->page[0] = mReq->req.dma; - for (i = 1; i < 5; i++) - mReq->ptr->page[i] = - (mReq->req.dma + i * CI13XXX_PAGE_SIZE) & ~TD_RESERVED_MASK; + + wmb(); if (!list_empty(&mEp->qh.queue)) { struct ci13xxx_req *mReqPrev; int n = hw_ep_bit(mEp->num, mEp->dir); int tmp_stat; + u32 next = mReq->dma & TD_ADDR_MASK; mReqPrev = list_entry(mEp->qh.queue.prev, struct ci13xxx_req, queue); if (mReqPrev->zptr) - mReqPrev->zptr->next = mReq->dma & TD_ADDR_MASK; + mReqPrev->zptr->next = cpu_to_le32(next); else - mReqPrev->ptr->next = mReq->dma & TD_ADDR_MASK; + mReqPrev->ptr->next = cpu_to_le32(next); wmb(); if (hw_read(ci, OP_ENDPTPRIME, BIT(n))) goto done; @@ -485,9 +462,9 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) } /* QH configuration */ - mEp->qh.ptr->td.next = mReq->dma; /* TERMINATE = 0 */ - mEp->qh.ptr->td.token &= ~TD_STATUS; /* clear status */ - mEp->qh.ptr->cap |= QH_ZLT; + mEp->qh.ptr->td.next = cpu_to_le32(mReq->dma); /* TERMINATE = 0 */ + mEp->qh.ptr->td.token &= + cpu_to_le32(~(TD_STATUS_HALTED|TD_STATUS_ACTIVE)); wmb(); /* synchronize before ep prime */ @@ -506,14 +483,16 @@ done: */ static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) { + u32 tmptoken = le32_to_cpu(mReq->ptr->token); + if (mReq->req.status != -EALREADY) return -EINVAL; - if ((TD_STATUS_ACTIVE & mReq->ptr->token) != 0) + if ((TD_STATUS_ACTIVE & tmptoken) != 0) return -EBUSY; if (mReq->zptr) { - if ((TD_STATUS_ACTIVE & mReq->zptr->token) != 0) + if ((cpu_to_le32(TD_STATUS_ACTIVE) & mReq->zptr->token) != 0) return -EBUSY; dma_pool_free(mEp->td_pool, mReq->zptr, mReq->zdma); mReq->zptr = NULL; @@ -523,7 +502,7 @@ static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) usb_gadget_unmap_request(&mEp->ci->gadget, &mReq->req, mEp->dir); - mReq->req.status = mReq->ptr->token & TD_STATUS; + mReq->req.status = tmptoken & TD_STATUS; if ((TD_STATUS_HALTED & mReq->req.status) != 0) mReq->req.status = -1; else if ((TD_STATUS_DT_ERR & mReq->req.status) != 0) @@ -531,8 +510,8 @@ static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) else if ((TD_STATUS_TR_ERR & mReq->req.status) != 0) mReq->req.status = -1; - mReq->req.actual = mReq->ptr->token & TD_TOTAL_BYTES; - mReq->req.actual >>= ffs_nr(TD_TOTAL_BYTES); + mReq->req.actual = tmptoken & TD_TOTAL_BYTES; + mReq->req.actual >>= __ffs(TD_TOTAL_BYTES); mReq->req.actual = mReq->req.length - mReq->req.actual; mReq->req.actual = mReq->req.status ? 0 : mReq->req.actual; @@ -561,6 +540,12 @@ __acquires(mEp->lock) struct ci13xxx_req *mReq = \ list_entry(mEp->qh.queue.next, struct ci13xxx_req, queue); + + if (mReq->zptr) { + dma_pool_free(mEp->td_pool, mReq->zptr, mReq->zdma); + mReq->zptr = NULL; + } + list_del_init(&mReq->queue); mReq->req.status = -ESHUTDOWN; @@ -629,8 +614,6 @@ __acquires(ci->lock) { int retval; - dbg_event(0xFF, "BUS RST", 0); - spin_unlock(&ci->lock); retval = _gadget_stop_activity(&ci->gadget); if (retval) @@ -668,6 +651,59 @@ static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req) } /** + * _ep_queue: queues (submits) an I/O request to an endpoint + * + * Caller must hold lock + */ +static int _ep_queue(struct usb_ep *ep, struct usb_request *req, + gfp_t __maybe_unused gfp_flags) +{ + struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); + struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req); + struct ci13xxx *ci = mEp->ci; + int retval = 0; + + if (ep == NULL || req == NULL || mEp->ep.desc == NULL) + return -EINVAL; + + if (mEp->type == USB_ENDPOINT_XFER_CONTROL) { + if (req->length) + mEp = (ci->ep0_dir == RX) ? + ci->ep0out : ci->ep0in; + if (!list_empty(&mEp->qh.queue)) { + _ep_nuke(mEp); + retval = -EOVERFLOW; + dev_warn(mEp->ci->dev, "endpoint ctrl %X nuked\n", + _usb_addr(mEp)); + } + } + + /* first nuke then test link, e.g. previous status has not sent */ + if (!list_empty(&mReq->queue)) { + dev_err(mEp->ci->dev, "request already in queue\n"); + return -EBUSY; + } + + if (req->length > (TD_PAGE_COUNT - 1) * CI13XXX_PAGE_SIZE) { + dev_err(mEp->ci->dev, "request bigger than one td\n"); + return -EMSGSIZE; + } + + /* push request */ + mReq->req.status = -EINPROGRESS; + mReq->req.actual = 0; + + retval = _hardware_enqueue(mEp, mReq); + + if (retval == -EALREADY) + retval = 0; + if (!retval) + list_add_tail(&mReq->queue, &mEp->qh.queue); + + return retval; +} + +/** * isr_get_status_response: get_status request response * @ci: ci struct * @setup: setup request packet @@ -714,9 +750,7 @@ __acquires(mEp->lock) } /* else do nothing; reserved for future use */ - spin_unlock(mEp->lock); - retval = usb_ep_queue(&mEp->ep, req, gfp_flags); - spin_lock(mEp->lock); + retval = _ep_queue(&mEp->ep, req, gfp_flags); if (retval) goto err_free_buf; @@ -763,8 +797,6 @@ isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req) * This function returns an error code */ static int isr_setup_status_phase(struct ci13xxx *ci) -__releases(mEp->lock) -__acquires(mEp->lock) { int retval; struct ci13xxx_ep *mEp; @@ -773,9 +805,7 @@ __acquires(mEp->lock) ci->status->context = ci; ci->status->complete = isr_setup_status_complete; - spin_unlock(mEp->lock); - retval = usb_ep_queue(&mEp->ep, ci->status, GFP_ATOMIC); - spin_lock(mEp->lock); + retval = _ep_queue(&mEp->ep, ci->status, GFP_ATOMIC); return retval; } @@ -801,7 +831,6 @@ __acquires(mEp->lock) if (retval < 0) break; list_del_init(&mReq->queue); - dbg_done(_usb_addr(mEp), mReq->ptr->token, retval); if (mReq->req.complete != NULL) { spin_unlock(mEp->lock); if ((mEp->type == USB_ENDPOINT_XFER_CONTROL) && @@ -814,8 +843,6 @@ __acquires(mEp->lock) if (retval == -EBUSY) retval = 0; - if (retval < 0) - dbg_event(_usb_addr(mEp), "DONE", retval); return retval; } @@ -847,8 +874,6 @@ __acquires(ci->lock) if (err > 0) /* needs status phase */ err = isr_setup_status_phase(ci); if (err < 0) { - dbg_event(_usb_addr(mEp), - "ERROR", err); spin_unlock(&ci->lock); if (usb_ep_set_halt(&mEp->ep)) dev_err(ci->dev, @@ -884,8 +909,6 @@ __acquires(ci->lock) ci->ep0_dir = (type & USB_DIR_IN) ? TX : RX; - dbg_setup(_usb_addr(mEp), &req); - switch (req.bRequest) { case USB_REQ_CLEAR_FEATURE: if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) && @@ -997,8 +1020,6 @@ delegate: } if (err < 0) { - dbg_event(_usb_addr(mEp), "ERROR", err); - spin_unlock(&ci->lock); if (usb_ep_set_halt(&mEp->ep)) dev_err(ci->dev, "error: ep_set_halt\n"); @@ -1021,6 +1042,7 @@ static int ep_enable(struct usb_ep *ep, struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); int retval = 0; unsigned long flags; + u32 cap = 0; if (ep == NULL || desc == NULL) return -EINVAL; @@ -1040,20 +1062,15 @@ static int ep_enable(struct usb_ep *ep, mEp->ep.maxpacket = usb_endpoint_maxp(desc); - dbg_event(_usb_addr(mEp), "ENABLE", 0); - - mEp->qh.ptr->cap = 0; - if (mEp->type == USB_ENDPOINT_XFER_CONTROL) - mEp->qh.ptr->cap |= QH_IOS; - else if (mEp->type == USB_ENDPOINT_XFER_ISOC) - mEp->qh.ptr->cap &= ~QH_MULT; - else - mEp->qh.ptr->cap &= ~QH_ZLT; + cap |= QH_IOS; + if (mEp->num) + cap |= QH_ZLT; + cap |= (mEp->ep.maxpacket << __ffs(QH_MAX_PKT)) & QH_MAX_PKT; + + mEp->qh.ptr->cap = cpu_to_le32(cap); - mEp->qh.ptr->cap |= - (mEp->ep.maxpacket << ffs_nr(QH_MAX_PKT)) & QH_MAX_PKT; - mEp->qh.ptr->td.next |= TD_TERMINATE; /* needed? */ + mEp->qh.ptr->td.next |= cpu_to_le32(TD_TERMINATE); /* needed? */ /* * Enable endpoints in the HW other than ep0 as ep0 @@ -1088,8 +1105,6 @@ static int ep_disable(struct usb_ep *ep) direction = mEp->dir; do { - dbg_event(_usb_addr(mEp), "DISABLE", 0); - retval |= _ep_nuke(mEp); retval |= hw_ep_disable(mEp->ci, mEp->num, mEp->dir); @@ -1129,8 +1144,6 @@ static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags) } } - dbg_event(_usb_addr(mEp), "ALLOC", mReq == NULL); - return (mReq == NULL) ? NULL : &mReq->req; } @@ -1158,8 +1171,6 @@ static void ep_free_request(struct usb_ep *ep, struct usb_request *req) dma_pool_free(mEp->td_pool, mReq->ptr, mReq->dma); kfree(mReq); - dbg_event(_usb_addr(mEp), "FREE", 0); - spin_unlock_irqrestore(mEp->lock, flags); } @@ -1172,8 +1183,6 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, gfp_t __maybe_unused gfp_flags) { struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); - struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req); - struct ci13xxx *ci = mEp->ci; int retval = 0; unsigned long flags; @@ -1181,48 +1190,7 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, return -EINVAL; spin_lock_irqsave(mEp->lock, flags); - - if (mEp->type == USB_ENDPOINT_XFER_CONTROL) { - if (req->length) - mEp = (ci->ep0_dir == RX) ? - ci->ep0out : ci->ep0in; - if (!list_empty(&mEp->qh.queue)) { - _ep_nuke(mEp); - retval = -EOVERFLOW; - dev_warn(mEp->ci->dev, "endpoint ctrl %X nuked\n", - _usb_addr(mEp)); - } - } - - /* first nuke then test link, e.g. previous status has not sent */ - if (!list_empty(&mReq->queue)) { - retval = -EBUSY; - dev_err(mEp->ci->dev, "request already in queue\n"); - goto done; - } - - if (req->length > 4 * CI13XXX_PAGE_SIZE) { - req->length = 4 * CI13XXX_PAGE_SIZE; - retval = -EMSGSIZE; - dev_warn(mEp->ci->dev, "request length truncated\n"); - } - - dbg_queue(_usb_addr(mEp), req, retval); - - /* push request */ - mReq->req.status = -EINPROGRESS; - mReq->req.actual = 0; - - retval = _hardware_enqueue(mEp, mReq); - - if (retval == -EALREADY) { - dbg_event(_usb_addr(mEp), "QUEUE", retval); - retval = 0; - } - if (!retval) - list_add_tail(&mReq->queue, &mEp->qh.queue); - - done: + retval = _ep_queue(ep, req, gfp_flags); spin_unlock_irqrestore(mEp->lock, flags); return retval; } @@ -1245,8 +1213,6 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req) spin_lock_irqsave(mEp->lock, flags); - dbg_event(_usb_addr(mEp), "DEQUEUE", 0); - hw_ep_flush(mEp->ci, mEp->num, mEp->dir); /* pop request */ @@ -1293,7 +1259,6 @@ static int ep_set_halt(struct usb_ep *ep, int value) direction = mEp->dir; do { - dbg_event(_usb_addr(mEp), "HALT", value); retval |= hw_ep_set_halt(mEp->ci, mEp->num, mEp->dir, value); if (!value) @@ -1322,10 +1287,7 @@ static int ep_set_wedge(struct usb_ep *ep) return -EINVAL; spin_lock_irqsave(mEp->lock, flags); - - dbg_event(_usb_addr(mEp), "WEDGE", 0); mEp->wedge = 1; - spin_unlock_irqrestore(mEp->lock, flags); return usb_ep_set_halt(ep); @@ -1348,7 +1310,6 @@ static void ep_fifo_flush(struct usb_ep *ep) spin_lock_irqsave(mEp->lock, flags); - dbg_event(_usb_addr(mEp), "FFLUSH", 0); hw_ep_flush(mEp->ci, mEp->num, mEp->dir); spin_unlock_irqrestore(mEp->lock, flags); @@ -1392,7 +1353,6 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active) if (is_active) { pm_runtime_get_sync(&_gadget->dev); hw_device_reset(ci, USBMODE_CM_DC); - hw_enable_vbus_intr(ci); hw_device_state(ci, ci->ep0out->qh.dma); } else { hw_device_state(ci, 0); @@ -1567,10 +1527,8 @@ static int ci13xxx_start(struct usb_gadget *gadget, pm_runtime_get_sync(&ci->gadget.dev); if (ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) { if (ci->vbus_active) { - if (ci->platdata->flags & CI13XXX_REGS_SHARED) { + if (ci->platdata->flags & CI13XXX_REGS_SHARED) hw_device_reset(ci, USBMODE_CM_DC); - hw_enable_vbus_intr(ci); - } } else { pm_runtime_put_sync(&ci->gadget.dev); goto done; @@ -1642,7 +1600,6 @@ static irqreturn_t udc_irq(struct ci13xxx *ci) } } intr = hw_test_and_clear_intr_active(ci); - dbg_interrupt(intr); if (intr) { /* order defines priority - do NOT change it */ @@ -1676,29 +1633,12 @@ static irqreturn_t udc_irq(struct ci13xxx *ci) } else { retval = IRQ_NONE; } - - intr = hw_read(ci, OP_OTGSC, ~0); - hw_write(ci, OP_OTGSC, ~0, intr); - - if (intr & (OTGSC_AVVIE & OTGSC_AVVIS)) - queue_work(ci->wq, &ci->vbus_work); - spin_unlock(&ci->lock); return retval; } /** - * udc_release: driver release function - * @dev: device - * - * Currently does nothing - */ -static void udc_release(struct device *dev) -{ -} - -/** * udc_start: initialize gadget role * @ci: chipidea controller */ @@ -1717,12 +1657,6 @@ static int udc_start(struct ci13xxx *ci) INIT_LIST_HEAD(&ci->gadget.ep_list); - dev_set_name(&ci->gadget.dev, "gadget"); - ci->gadget.dev.dma_mask = dev->dma_mask; - ci->gadget.dev.coherent_dma_mask = dev->coherent_dma_mask; - ci->gadget.dev.parent = dev; - ci->gadget.dev.release = udc_release; - /* alloc resources */ ci->qh_pool = dma_pool_create("ci13xxx_qh", dev, sizeof(struct ci13xxx_qh), @@ -1758,24 +1692,13 @@ static int udc_start(struct ci13xxx *ci) retval = hw_device_reset(ci, USBMODE_CM_DC); if (retval) goto put_transceiver; - hw_enable_vbus_intr(ci); - } - - retval = device_register(&ci->gadget.dev); - if (retval) { - put_device(&ci->gadget.dev); - goto put_transceiver; } - retval = dbg_create_files(ci->dev); - if (retval) - goto unreg_device; - if (!IS_ERR_OR_NULL(ci->transceiver)) { retval = otg_set_peripheral(ci->transceiver->otg, &ci->gadget); if (retval) - goto remove_dbg; + goto put_transceiver; } retval = usb_add_gadget_udc(dev, &ci->gadget); @@ -1795,10 +1718,6 @@ remove_trans: } dev_err(dev, "error = %i\n", retval); -remove_dbg: - dbg_remove_files(ci->dev); -unreg_device: - device_unregister(&ci->gadget.dev); put_transceiver: if (!IS_ERR_OR_NULL(ci->transceiver) && ci->global_phy) usb_put_phy(ci->transceiver); @@ -1821,9 +1740,6 @@ static void udc_stop(struct ci13xxx *ci) if (ci == NULL) return; - hw_disable_vbus_intr(ci); - cancel_work_sync(&ci->vbus_work); - usb_del_gadget_udc(&ci->gadget); destroy_eps(ci); @@ -1836,8 +1752,6 @@ static void udc_stop(struct ci13xxx *ci) if (ci->global_phy) usb_put_phy(ci->transceiver); } - dbg_remove_files(ci->dev); - device_unregister(&ci->gadget.dev); /* my kobject is dynamic, I swear! */ memset(&ci->gadget, 0, sizeof(ci->gadget)); } @@ -1864,7 +1778,6 @@ int ci_hdrc_gadget_init(struct ci13xxx *ci) rdrv->irq = udc_irq; rdrv->name = "gadget"; ci->roles[CI_ROLE_GADGET] = rdrv; - INIT_WORK(&ci->vbus_work, vbus_work); return 0; } diff --git a/drivers/usb/chipidea/udc.h b/drivers/usb/chipidea/udc.h index 4ff2384d7ca8..d12e8b59b110 100644 --- a/drivers/usb/chipidea/udc.h +++ b/drivers/usb/chipidea/udc.h @@ -40,7 +40,7 @@ struct ci13xxx_td { #define TD_CURR_OFFSET (0x0FFFUL << 0) #define TD_FRAME_NUM (0x07FFUL << 0) #define TD_RESERVED_MASK (0x0FFFUL << 0) -} __attribute__ ((packed)); +} __attribute__ ((packed, aligned(4))); /* DMA layout of queue heads */ struct ci13xxx_qh { @@ -57,7 +57,7 @@ struct ci13xxx_qh { /* 9 */ u32 RESERVED; struct usb_ctrlrequest setup; -} __attribute__ ((packed)); +} __attribute__ ((packed, aligned(4))); /** * struct ci13xxx_req - usb request representation diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c new file mode 100644 index 000000000000..714a6bd810ed --- /dev/null +++ b/drivers/usb/chipidea/usbmisc_imx.c @@ -0,0 +1,261 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/delay.h> + +#include "ci13xxx_imx.h" + +#define USB_DEV_MAX 4 + +#define MX25_USB_PHY_CTRL_OFFSET 0x08 +#define MX25_BM_EXTERNAL_VBUS_DIVIDER BIT(23) + +#define MX53_USB_OTG_PHY_CTRL_0_OFFSET 0x08 +#define MX53_USB_UH2_CTRL_OFFSET 0x14 +#define MX53_USB_UH3_CTRL_OFFSET 0x18 +#define MX53_BM_OVER_CUR_DIS_H1 BIT(5) +#define MX53_BM_OVER_CUR_DIS_OTG BIT(8) +#define MX53_BM_OVER_CUR_DIS_UHx BIT(30) + +#define MX6_BM_OVER_CUR_DIS BIT(7) + +struct imx_usbmisc { + void __iomem *base; + spinlock_t lock; + struct clk *clk; + struct usbmisc_usb_device usbdev[USB_DEV_MAX]; + const struct usbmisc_ops *ops; +}; + +static struct imx_usbmisc *usbmisc; + +static struct usbmisc_usb_device *get_usbdev(struct device *dev) +{ + int i, ret; + + for (i = 0; i < USB_DEV_MAX; i++) { + if (usbmisc->usbdev[i].dev == dev) + return &usbmisc->usbdev[i]; + else if (!usbmisc->usbdev[i].dev) + break; + } + + if (i >= USB_DEV_MAX) + return ERR_PTR(-EBUSY); + + ret = usbmisc_get_init_data(dev, &usbmisc->usbdev[i]); + if (ret) + return ERR_PTR(ret); + + return &usbmisc->usbdev[i]; +} + +static int usbmisc_imx25_post(struct device *dev) +{ + struct usbmisc_usb_device *usbdev; + void __iomem *reg; + unsigned long flags; + u32 val; + + usbdev = get_usbdev(dev); + if (IS_ERR(usbdev)) + return PTR_ERR(usbdev); + + reg = usbmisc->base + MX25_USB_PHY_CTRL_OFFSET; + + if (usbdev->evdo) { + spin_lock_irqsave(&usbmisc->lock, flags); + val = readl(reg); + writel(val | MX25_BM_EXTERNAL_VBUS_DIVIDER, reg); + spin_unlock_irqrestore(&usbmisc->lock, flags); + usleep_range(5000, 10000); /* needed to stabilize voltage */ + } + + return 0; +} + +static int usbmisc_imx53_init(struct device *dev) +{ + struct usbmisc_usb_device *usbdev; + void __iomem *reg = NULL; + unsigned long flags; + u32 val = 0; + + usbdev = get_usbdev(dev); + if (IS_ERR(usbdev)) + return PTR_ERR(usbdev); + + if (usbdev->disable_oc) { + spin_lock_irqsave(&usbmisc->lock, flags); + switch (usbdev->index) { + case 0: + reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET; + val = readl(reg) | MX53_BM_OVER_CUR_DIS_OTG; + break; + case 1: + reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET; + val = readl(reg) | MX53_BM_OVER_CUR_DIS_H1; + break; + case 2: + reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET; + val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx; + break; + case 3: + reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET; + val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx; + break; + } + if (reg && val) + writel(val, reg); + spin_unlock_irqrestore(&usbmisc->lock, flags); + } + + return 0; +} + +static int usbmisc_imx6q_init(struct device *dev) +{ + + struct usbmisc_usb_device *usbdev; + unsigned long flags; + u32 reg; + + usbdev = get_usbdev(dev); + if (IS_ERR(usbdev)) + return PTR_ERR(usbdev); + + if (usbdev->disable_oc) { + spin_lock_irqsave(&usbmisc->lock, flags); + reg = readl(usbmisc->base + usbdev->index * 4); + writel(reg | MX6_BM_OVER_CUR_DIS, + usbmisc->base + usbdev->index * 4); + spin_unlock_irqrestore(&usbmisc->lock, flags); + } + + return 0; +} + +static const struct usbmisc_ops imx25_usbmisc_ops = { + .post = usbmisc_imx25_post, +}; + +static const struct usbmisc_ops imx53_usbmisc_ops = { + .init = usbmisc_imx53_init, +}; + +static const struct usbmisc_ops imx6q_usbmisc_ops = { + .init = usbmisc_imx6q_init, +}; + +static const struct of_device_id usbmisc_imx_dt_ids[] = { + { + .compatible = "fsl,imx25-usbmisc", + .data = &imx25_usbmisc_ops, + }, + { + .compatible = "fsl,imx53-usbmisc", + .data = &imx53_usbmisc_ops, + }, + { + .compatible = "fsl,imx6q-usbmisc", + .data = &imx6q_usbmisc_ops, + }, + { /* sentinel */ } +}; + +static int usbmisc_imx_probe(struct platform_device *pdev) +{ + struct resource *res; + struct imx_usbmisc *data; + int ret; + struct of_device_id *tmp_dev; + + if (usbmisc) + return -EBUSY; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + spin_lock_init(&data->lock); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + data->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(data->base)) + return PTR_ERR(data->base); + + data->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(data->clk)) { + dev_err(&pdev->dev, + "failed to get clock, err=%ld\n", PTR_ERR(data->clk)); + return PTR_ERR(data->clk); + } + + ret = clk_prepare_enable(data->clk); + if (ret) { + dev_err(&pdev->dev, + "clk_prepare_enable failed, err=%d\n", ret); + return ret; + } + + tmp_dev = (struct of_device_id *) + of_match_device(usbmisc_imx_dt_ids, &pdev->dev); + data->ops = (const struct usbmisc_ops *)tmp_dev->data; + usbmisc = data; + ret = usbmisc_set_ops(data->ops); + if (ret) { + usbmisc = NULL; + clk_disable_unprepare(data->clk); + return ret; + } + + return 0; +} + +static int usbmisc_imx_remove(struct platform_device *pdev) +{ + usbmisc_unset_ops(usbmisc->ops); + clk_disable_unprepare(usbmisc->clk); + usbmisc = NULL; + return 0; +} + +static struct platform_driver usbmisc_imx_driver = { + .probe = usbmisc_imx_probe, + .remove = usbmisc_imx_remove, + .driver = { + .name = "usbmisc_imx", + .owner = THIS_MODULE, + .of_match_table = usbmisc_imx_dt_ids, + }, +}; + +int usbmisc_imx_drv_init(void) +{ + return platform_driver_register(&usbmisc_imx_driver); +} +subsys_initcall(usbmisc_imx_drv_init); + +void usbmisc_imx_drv_exit(void) +{ + platform_driver_unregister(&usbmisc_imx_driver); +} +module_exit(usbmisc_imx_drv_exit); + +MODULE_ALIAS("platform:usbmisc-imx"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("driver for imx usb non-core registers"); +MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>"); diff --git a/drivers/usb/chipidea/usbmisc_imx6q.c b/drivers/usb/chipidea/usbmisc_imx6q.c deleted file mode 100644 index a1bce391e825..000000000000 --- a/drivers/usb/chipidea/usbmisc_imx6q.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * Copyright 2012 Freescale Semiconductor, Inc. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/module.h> -#include <linux/of_platform.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> - -#include "ci13xxx_imx.h" - -#define USB_DEV_MAX 4 - -#define BM_OVER_CUR_DIS BIT(7) - -struct imx6q_usbmisc { - void __iomem *base; - spinlock_t lock; - struct clk *clk; - struct usbmisc_usb_device usbdev[USB_DEV_MAX]; -}; - -static struct imx6q_usbmisc *usbmisc; - -static struct usbmisc_usb_device *get_usbdev(struct device *dev) -{ - int i, ret; - - for (i = 0; i < USB_DEV_MAX; i++) { - if (usbmisc->usbdev[i].dev == dev) - return &usbmisc->usbdev[i]; - else if (!usbmisc->usbdev[i].dev) - break; - } - - if (i >= USB_DEV_MAX) - return ERR_PTR(-EBUSY); - - ret = usbmisc_get_init_data(dev, &usbmisc->usbdev[i]); - if (ret) - return ERR_PTR(ret); - - return &usbmisc->usbdev[i]; -} - -static int usbmisc_imx6q_init(struct device *dev) -{ - - struct usbmisc_usb_device *usbdev; - unsigned long flags; - u32 reg; - - usbdev = get_usbdev(dev); - if (IS_ERR(usbdev)) - return PTR_ERR(usbdev); - - if (usbdev->disable_oc) { - spin_lock_irqsave(&usbmisc->lock, flags); - reg = readl(usbmisc->base + usbdev->index * 4); - writel(reg | BM_OVER_CUR_DIS, - usbmisc->base + usbdev->index * 4); - spin_unlock_irqrestore(&usbmisc->lock, flags); - } - - return 0; -} - -static const struct usbmisc_ops imx6q_usbmisc_ops = { - .init = usbmisc_imx6q_init, -}; - -static const struct of_device_id usbmisc_imx6q_dt_ids[] = { - { .compatible = "fsl,imx6q-usbmisc"}, - { /* sentinel */ } -}; - -static int usbmisc_imx6q_probe(struct platform_device *pdev) -{ - struct resource *res; - struct imx6q_usbmisc *data; - int ret; - - if (usbmisc) - return -EBUSY; - - data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); - if (!data) - return -ENOMEM; - - spin_lock_init(&data->lock); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - data->base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(data->base)) - return PTR_ERR(data->base); - - data->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(data->clk)) { - dev_err(&pdev->dev, - "failed to get clock, err=%ld\n", PTR_ERR(data->clk)); - return PTR_ERR(data->clk); - } - - ret = clk_prepare_enable(data->clk); - if (ret) { - dev_err(&pdev->dev, - "clk_prepare_enable failed, err=%d\n", ret); - return ret; - } - - ret = usbmisc_set_ops(&imx6q_usbmisc_ops); - if (ret) { - clk_disable_unprepare(data->clk); - return ret; - } - - usbmisc = data; - - return 0; -} - -static int usbmisc_imx6q_remove(struct platform_device *pdev) -{ - usbmisc_unset_ops(&imx6q_usbmisc_ops); - clk_disable_unprepare(usbmisc->clk); - return 0; -} - -static struct platform_driver usbmisc_imx6q_driver = { - .probe = usbmisc_imx6q_probe, - .remove = usbmisc_imx6q_remove, - .driver = { - .name = "usbmisc_imx6q", - .owner = THIS_MODULE, - .of_match_table = usbmisc_imx6q_dt_ids, - }, -}; - -int __init usbmisc_imx6q_drv_init(void) -{ - return platform_driver_register(&usbmisc_imx6q_driver); -} -subsys_initcall(usbmisc_imx6q_drv_init); - -void __exit usbmisc_imx6q_drv_exit(void) -{ - platform_driver_unregister(&usbmisc_imx6q_driver); -} -module_exit(usbmisc_imx6q_drv_exit); - -MODULE_ALIAS("platform:usbmisc-imx6q"); -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("driver for imx6q usb non-core registers"); -MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>"); diff --git a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig index 316aac8e4ca1..bb8b73682a70 100644 --- a/drivers/usb/class/Kconfig +++ b/drivers/usb/class/Kconfig @@ -2,11 +2,10 @@ # USB Class driver configuration # comment "USB Device Class drivers" - depends on USB config USB_ACM tristate "USB Modem (CDC ACM) support" - depends on USB && TTY + depends on TTY ---help--- This driver supports USB modems and ISDN adapters which support the Communication Device Class Abstract Control Model interface. @@ -21,7 +20,6 @@ config USB_ACM config USB_PRINTER tristate "USB Printer support" - depends on USB help Say Y here if you want to connect a USB printer to your computer's USB port. @@ -31,7 +29,6 @@ config USB_PRINTER config USB_WDM tristate "USB Wireless Device Management support" - depends on USB ---help--- This driver supports the WMC Device Management functionality of cell phones compliant to the CDC WMC specification. You can use @@ -42,7 +39,6 @@ config USB_WDM config USB_TMC tristate "USB Test and Measurement Class support" - depends on USB help Say Y here if you want to connect a USB device that follows the USB.org specification for USB Test and Measurement devices diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index c77f7ae48f1c..171d7a9df3ae 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -828,14 +828,6 @@ static int acm_tty_ioctl(struct tty_struct *tty, return rv; } -static const __u32 acm_tty_speed[] = { - 0, 50, 75, 110, 134, 150, 200, 300, 600, - 1200, 1800, 2400, 4800, 9600, 19200, 38400, - 57600, 115200, 230400, 460800, 500000, 576000, - 921600, 1000000, 1152000, 1500000, 2000000, - 2500000, 3000000, 3500000, 4000000 -}; - static void acm_tty_set_termios(struct tty_struct *tty, struct ktermios *termios_old) { diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 122d056d96d5..8a230f0ef77c 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -13,6 +13,7 @@ */ #include <linux/kernel.h> #include <linux/errno.h> +#include <linux/ioctl.h> #include <linux/slab.h> #include <linux/module.h> #include <linux/mutex.h> @@ -644,6 +645,22 @@ static int wdm_release(struct inode *inode, struct file *file) return 0; } +static long wdm_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + struct wdm_device *desc = file->private_data; + int rv = 0; + + switch (cmd) { + case IOCTL_WDM_MAX_COMMAND: + if (copy_to_user((void __user *)arg, &desc->wMaxCommand, sizeof(desc->wMaxCommand))) + rv = -EFAULT; + break; + default: + rv = -ENOTTY; + } + return rv; +} + static const struct file_operations wdm_fops = { .owner = THIS_MODULE, .read = wdm_read, @@ -652,6 +669,8 @@ static const struct file_operations wdm_fops = { .flush = wdm_flush, .release = wdm_release, .poll = wdm_poll, + .unlocked_ioctl = wdm_ioctl, + .compat_ioctl = wdm_ioctl, .llseek = noop_llseek, }; diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 70d69d06054f..4c5506ae5e45 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -718,50 +718,32 @@ exit: static int usbtmc_ioctl_clear_out_halt(struct usbtmc_device_data *data) { - u8 *buffer; int rv; - buffer = kmalloc(2, GFP_KERNEL); - if (!buffer) - return -ENOMEM; - rv = usb_clear_halt(data->usb_dev, usb_sndbulkpipe(data->usb_dev, data->bulk_out)); if (rv < 0) { dev_err(&data->usb_dev->dev, "usb_control_msg returned %d\n", rv); - goto exit; + return rv; } - rv = 0; - -exit: - kfree(buffer); - return rv; + return 0; } static int usbtmc_ioctl_clear_in_halt(struct usbtmc_device_data *data) { - u8 *buffer; int rv; - buffer = kmalloc(2, GFP_KERNEL); - if (!buffer) - return -ENOMEM; - rv = usb_clear_halt(data->usb_dev, usb_rcvbulkpipe(data->usb_dev, data->bulk_in)); if (rv < 0) { dev_err(&data->usb_dev->dev, "usb_control_msg returned %d\n", rv); - goto exit; + return rv; } - rv = 0; - -exit: - kfree(buffer); - return rv; + return 0; } static int get_capabilities(struct usbtmc_device_data *data) diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index f70c1a1694ad..8772b3659296 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -3,7 +3,6 @@ # config USB_DEBUG bool "USB verbose debug messages" - depends on USB help Say Y here if you want the USB core & hub drivers to produce a bunch of debug messages to the system log. Select this if you are having a @@ -11,7 +10,6 @@ config USB_DEBUG config USB_ANNOUNCE_NEW_DEVICES bool "USB announce new devices" - depends on USB default N help Say Y here if you want the USB core to always announce the @@ -25,11 +23,24 @@ config USB_ANNOUNCE_NEW_DEVICES log, or have any doubts about this, say N here. comment "Miscellaneous USB options" - depends on USB + +config USB_DEFAULT_PERSIST + bool "Enable USB persist by default" + default y + help + Say N here if you don't want USB power session persistance + enabled by default. If you say N it will make suspended USB + devices that lose power get reenumerated as if they had been + unplugged, causing any mounted filesystems to be lost. The + persist feature can still be enabled for individual devices + through the power/persist sysfs node. See + Documentation/usb/persist.txt for more info. + + If you have any questions about this, say Y here, only say N + if you know exactly what you are doing. config USB_DYNAMIC_MINORS bool "Dynamic USB minor allocation" - depends on USB help If you say Y here, the USB subsystem will use dynamic minor allocation for any device that uses the USB major number. @@ -38,25 +49,8 @@ config USB_DYNAMIC_MINORS If you are unsure about this, say N here. -config USB_SUSPEND - bool "USB runtime power management (autosuspend) and wakeup" - depends on USB && PM_RUNTIME - help - If you say Y here, you can use driver calls or the sysfs - "power/control" file to enable or disable autosuspend for - individual USB peripherals (see - Documentation/usb/power-management.txt for more details). - - Also, USB "remote wakeup" signaling is supported, whereby some - USB devices (like keyboards and network adapters) can wake up - their parent hub. That wakeup cascades up the USB tree, and - could wake the system from states like suspend-to-RAM. - - If you are unsure about this, say N here. - config USB_OTG bool "OTG support" - depends on USB depends on USB_SUSPEND default n help diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 8823e98989fe..caefc800f298 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -739,6 +739,8 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype, index &= 0xff; switch (requesttype & USB_RECIP_MASK) { case USB_RECIP_ENDPOINT: + if ((index & ~USB_DIR_IN) == 0) + return 0; ret = findintfep(ps->dev, index); if (ret >= 0) ret = checkintf(ps, ret); diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index d938b2b99e31..6eab440e1542 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1196,9 +1196,14 @@ done: * * This is the central routine for suspending USB devices. It calls the * suspend methods for all the interface drivers in @udev and then calls - * the suspend method for @udev itself. If an error occurs at any stage, - * all the interfaces which were suspended are resumed so that they remain - * in the same state as the device. + * the suspend method for @udev itself. When the routine is called in + * autosuspend, if an error occurs at any stage, all the interfaces + * which were suspended are resumed so that they remain in the same + * state as the device, but when called from system sleep, all error + * from suspend methods of interfaces and the non-root-hub device itself + * are simply ignored, so all suspended interfaces are only resumed + * to the device's state when @udev is root-hub and its suspend method + * returns failure. * * Autosuspend requests originating from a child device or an interface * driver may be made without the protection of @udev's device lock, but @@ -1248,10 +1253,12 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) /* If the suspend failed, resume interfaces that did get suspended */ if (status != 0) { - msg.event ^= (PM_EVENT_SUSPEND | PM_EVENT_RESUME); - while (++i < n) { - intf = udev->actconfig->interface[i]; - usb_resume_interface(udev, intf, msg, 0); + if (udev->actconfig) { + msg.event ^= (PM_EVENT_SUSPEND | PM_EVENT_RESUME); + while (++i < n) { + intf = udev->actconfig->interface[i]; + usb_resume_interface(udev, intf, msg, 0); + } } /* If the suspend succeeded then prevent any more URB submissions @@ -1407,7 +1414,7 @@ int usb_resume(struct device *dev, pm_message_t msg) #endif /* CONFIG_PM */ -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME /** * usb_enable_autosuspend - allow a USB device to be autosuspended @@ -1775,7 +1782,7 @@ int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable) return ret; } -#endif /* CONFIG_USB_SUSPEND */ +#endif /* CONFIG_PM_RUNTIME */ struct bus_type usb_bus_type = { .name = "usb", diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c index 271e761f563e..acbfeb0a0119 100644 --- a/drivers/usb/core/generic.c +++ b/drivers/usb/core/generic.c @@ -169,7 +169,7 @@ static int generic_probe(struct usb_device *udev) c = usb_choose_configuration(udev); if (c >= 0) { err = usb_set_configuration(udev, c); - if (err) { + if (err && err != -ENODEV) { dev_err(&udev->dev, "can't set config #%d, error %d\n", c, err); /* This need not be fatal. The user can try to diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 2b487d4797bd..caeb8d6d39fb 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -37,119 +37,123 @@ /* PCI-based HCs are common, but plenty of non-PCI HCs are used too */ -#ifdef CONFIG_PM_SLEEP - -/* Coordinate handoffs between EHCI and companion controllers - * during system resume +/* + * Coordinate handoffs between EHCI and companion controllers + * during EHCI probing and system resume. */ -static DEFINE_MUTEX(companions_mutex); +static DECLARE_RWSEM(companions_rwsem); #define CL_UHCI PCI_CLASS_SERIAL_USB_UHCI #define CL_OHCI PCI_CLASS_SERIAL_USB_OHCI #define CL_EHCI PCI_CLASS_SERIAL_USB_EHCI -enum companion_action { - SET_HS_COMPANION, CLEAR_HS_COMPANION, WAIT_FOR_COMPANIONS -}; +static inline int is_ohci_or_uhci(struct pci_dev *pdev) +{ + return pdev->class == CL_OHCI || pdev->class == CL_UHCI; +} + +typedef void (*companion_fn)(struct pci_dev *pdev, struct usb_hcd *hcd, + struct pci_dev *companion, struct usb_hcd *companion_hcd); -static void companion_common(struct pci_dev *pdev, struct usb_hcd *hcd, - enum companion_action action) +/* Iterate over PCI devices in the same slot as pdev and call fn for each */ +static void for_each_companion(struct pci_dev *pdev, struct usb_hcd *hcd, + companion_fn fn) { struct pci_dev *companion; struct usb_hcd *companion_hcd; unsigned int slot = PCI_SLOT(pdev->devfn); - /* Iterate through other PCI functions in the same slot. - * If pdev is OHCI or UHCI then we are looking for EHCI, and - * vice versa. + /* + * Iterate through other PCI functions in the same slot. + * If the function's drvdata isn't set then it isn't bound to + * a USB host controller driver, so skip it. */ companion = NULL; for_each_pci_dev(companion) { if (companion->bus != pdev->bus || PCI_SLOT(companion->devfn) != slot) continue; - companion_hcd = pci_get_drvdata(companion); if (!companion_hcd) continue; - - /* For SET_HS_COMPANION, store a pointer to the EHCI bus in - * the OHCI/UHCI companion bus structure. - * For CLEAR_HS_COMPANION, clear the pointer to the EHCI bus - * in the OHCI/UHCI companion bus structure. - * For WAIT_FOR_COMPANIONS, wait until the OHCI/UHCI - * companion controllers have fully resumed. - */ - - if ((pdev->class == CL_OHCI || pdev->class == CL_UHCI) && - companion->class == CL_EHCI) { - /* action must be SET_HS_COMPANION */ - dev_dbg(&companion->dev, "HS companion for %s\n", - dev_name(&pdev->dev)); - hcd->self.hs_companion = &companion_hcd->self; - - } else if (pdev->class == CL_EHCI && - (companion->class == CL_OHCI || - companion->class == CL_UHCI)) { - switch (action) { - case SET_HS_COMPANION: - dev_dbg(&pdev->dev, "HS companion for %s\n", - dev_name(&companion->dev)); - companion_hcd->self.hs_companion = &hcd->self; - break; - case CLEAR_HS_COMPANION: - companion_hcd->self.hs_companion = NULL; - break; - case WAIT_FOR_COMPANIONS: - device_pm_wait_for_dev(&pdev->dev, - &companion->dev); - break; - } - } + fn(pdev, hcd, companion, companion_hcd); } } -static void set_hs_companion(struct pci_dev *pdev, struct usb_hcd *hcd) +/* + * We're about to add an EHCI controller, which will unceremoniously grab + * all the port connections away from its companions. To prevent annoying + * error messages, lock the companion's root hub and gracefully unconfigure + * it beforehand. Leave it locked until the EHCI controller is all set. + */ +static void ehci_pre_add(struct pci_dev *pdev, struct usb_hcd *hcd, + struct pci_dev *companion, struct usb_hcd *companion_hcd) { - mutex_lock(&companions_mutex); - dev_set_drvdata(&pdev->dev, hcd); - companion_common(pdev, hcd, SET_HS_COMPANION); - mutex_unlock(&companions_mutex); + struct usb_device *udev; + + if (is_ohci_or_uhci(companion)) { + udev = companion_hcd->self.root_hub; + usb_lock_device(udev); + usb_set_configuration(udev, 0); + } } -static void clear_hs_companion(struct pci_dev *pdev, struct usb_hcd *hcd) +/* + * Adding the EHCI controller has either succeeded or failed. Set the + * companion pointer accordingly, and in either case, reconfigure and + * unlock the root hub. + */ +static void ehci_post_add(struct pci_dev *pdev, struct usb_hcd *hcd, + struct pci_dev *companion, struct usb_hcd *companion_hcd) { - mutex_lock(&companions_mutex); - dev_set_drvdata(&pdev->dev, NULL); + struct usb_device *udev; - /* If pdev is OHCI or UHCI, just clear its hs_companion pointer */ - if (pdev->class == CL_OHCI || pdev->class == CL_UHCI) - hcd->self.hs_companion = NULL; + if (is_ohci_or_uhci(companion)) { + if (dev_get_drvdata(&pdev->dev)) { /* Succeeded */ + dev_dbg(&pdev->dev, "HS companion for %s\n", + dev_name(&companion->dev)); + companion_hcd->self.hs_companion = &hcd->self; + } + udev = companion_hcd->self.root_hub; + usb_set_configuration(udev, 1); + usb_unlock_device(udev); + } +} - /* Otherwise search for companion buses and clear their pointers */ - else - companion_common(pdev, hcd, CLEAR_HS_COMPANION); - mutex_unlock(&companions_mutex); +/* + * We just added a non-EHCI controller. Find the EHCI controller to + * which it is a companion, and store a pointer to the bus structure. + */ +static void non_ehci_add(struct pci_dev *pdev, struct usb_hcd *hcd, + struct pci_dev *companion, struct usb_hcd *companion_hcd) +{ + if (is_ohci_or_uhci(pdev) && companion->class == CL_EHCI) { + dev_dbg(&pdev->dev, "FS/LS companion for %s\n", + dev_name(&companion->dev)); + hcd->self.hs_companion = &companion_hcd->self; + } } -static void wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd) +/* We are removing an EHCI controller. Clear the companions' pointers. */ +static void ehci_remove(struct pci_dev *pdev, struct usb_hcd *hcd, + struct pci_dev *companion, struct usb_hcd *companion_hcd) { - /* Only EHCI controllers need to wait. - * No locking is needed because a controller cannot be resumed - * while one of its companions is getting unbound. - */ - if (pdev->class == CL_EHCI) - companion_common(pdev, hcd, WAIT_FOR_COMPANIONS); + if (is_ohci_or_uhci(companion)) + companion_hcd->self.hs_companion = NULL; } -#else /* !CONFIG_PM_SLEEP */ +#ifdef CONFIG_PM -static inline void set_hs_companion(struct pci_dev *d, struct usb_hcd *h) {} -static inline void clear_hs_companion(struct pci_dev *d, struct usb_hcd *h) {} -static inline void wait_for_companions(struct pci_dev *d, struct usb_hcd *h) {} +/* An EHCI controller must wait for its companions before resuming. */ +static void ehci_wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd, + struct pci_dev *companion, struct usb_hcd *companion_hcd) +{ + if (is_ohci_or_uhci(companion)) + device_pm_wait_for_dev(&pdev->dev, &companion->dev); +} -#endif /* !CONFIG_PM_SLEEP */ +#endif /* CONFIG_PM */ /*-------------------------------------------------------------------------*/ @@ -217,7 +221,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) driver->description)) { dev_dbg(&dev->dev, "controller already in use\n"); retval = -EBUSY; - goto clear_companion; + goto put_hcd; } hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); if (hcd->regs == NULL) { @@ -244,16 +248,35 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) if (region == PCI_ROM_RESOURCE) { dev_dbg(&dev->dev, "no i/o regions available\n"); retval = -EBUSY; - goto clear_companion; + goto put_hcd; } } pci_set_master(dev); - retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED); + /* Note: dev_set_drvdata must be called while holding the rwsem */ + if (dev->class == CL_EHCI) { + down_write(&companions_rwsem); + dev_set_drvdata(&dev->dev, hcd); + for_each_companion(dev, hcd, ehci_pre_add); + retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED); + if (retval != 0) + dev_set_drvdata(&dev->dev, NULL); + for_each_companion(dev, hcd, ehci_post_add); + up_write(&companions_rwsem); + } else { + down_read(&companions_rwsem); + dev_set_drvdata(&dev->dev, hcd); + retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED); + if (retval != 0) + dev_set_drvdata(&dev->dev, NULL); + else + for_each_companion(dev, hcd, non_ehci_add); + up_read(&companions_rwsem); + } + if (retval != 0) goto unmap_registers; - set_hs_companion(dev, hcd); if (pci_dev_run_wake(dev)) pm_runtime_put_noidle(&dev->dev); @@ -266,8 +289,7 @@ release_mem_region: release_mem_region(hcd->rsrc_start, hcd->rsrc_len); } else release_region(hcd->rsrc_start, hcd->rsrc_len); -clear_companion: - clear_hs_companion(dev, hcd); +put_hcd: usb_put_hcd(hcd); disable_pci: pci_disable_device(dev); @@ -310,14 +332,29 @@ void usb_hcd_pci_remove(struct pci_dev *dev) usb_hcd_irq(0, hcd); local_irq_enable(); - usb_remove_hcd(hcd); + /* Note: dev_set_drvdata must be called while holding the rwsem */ + if (dev->class == CL_EHCI) { + down_write(&companions_rwsem); + for_each_companion(dev, hcd, ehci_remove); + usb_remove_hcd(hcd); + dev_set_drvdata(&dev->dev, NULL); + up_write(&companions_rwsem); + } else { + /* Not EHCI; just clear the companion pointer */ + down_read(&companions_rwsem); + hcd->self.hs_companion = NULL; + usb_remove_hcd(hcd); + dev_set_drvdata(&dev->dev, NULL); + up_read(&companions_rwsem); + } + if (hcd->driver->flags & HCD_MEMORY) { iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); } else { release_region(hcd->rsrc_start, hcd->rsrc_len); } - clear_hs_companion(dev, hcd); + usb_put_hcd(hcd); pci_disable_device(dev); } @@ -463,8 +500,15 @@ static int resume_common(struct device *dev, int event) pci_set_master(pci_dev); if (hcd->driver->pci_resume && !HCD_DEAD(hcd)) { - if (event != PM_EVENT_AUTO_RESUME) - wait_for_companions(pci_dev, hcd); + + /* + * Only EHCI controllers have to wait for their companions. + * No locking is needed because PCI controller drivers do not + * get unbound during system resume. + */ + if (pci_dev->class == CL_EHCI && event != PM_EVENT_AUTO_RESUME) + for_each_companion(pci_dev, hcd, + ehci_wait_for_companions); retval = hcd->driver->pci_resume(hcd, event == PM_EVENT_RESTORE); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index f9ec44cbb82f..d53547d2e4c7 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2125,7 +2125,7 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg) #endif /* CONFIG_PM */ -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME /* Workqueue routine for root-hub remote wakeup */ static void hcd_resume_work(struct work_struct *work) @@ -2160,7 +2160,7 @@ void usb_hcd_resume_root_hub (struct usb_hcd *hcd) } EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub); -#endif /* CONFIG_USB_SUSPEND */ +#endif /* CONFIG_PM_RUNTIME */ /*-------------------------------------------------------------------------*/ @@ -2336,7 +2336,7 @@ struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver, init_timer(&hcd->rh_timer); hcd->rh_timer.function = rh_timer_func; hcd->rh_timer.data = (unsigned long) hcd; -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME INIT_WORK(&hcd->wakeup_work, hcd_resume_work); #endif @@ -2590,7 +2590,7 @@ error_create_attr_group: hcd->rh_registered = 0; spin_unlock_irq(&hcd_root_hub_lock); -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME cancel_work_sync(&hcd->wakeup_work); #endif mutex_lock(&usb_bus_list_lock); @@ -2645,7 +2645,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) hcd->rh_registered = 0; spin_unlock_irq (&hcd_root_hub_lock); -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME cancel_work_sync(&hcd->wakeup_work); #endif diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 5480352f984d..feef9351463d 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -555,8 +555,9 @@ static int hub_port_status(struct usb_hub *hub, int port1, mutex_lock(&hub->status_mutex); ret = get_port_status(hub->hdev, port1, &hub->status->port); if (ret < 4) { - dev_err(hub->intfdev, - "%s failed (err = %d)\n", __func__, ret); + if (ret != -ENODEV) + dev_err(hub->intfdev, + "%s failed (err = %d)\n", __func__, ret); if (ret >= 0) ret = -EIO; } else { @@ -699,7 +700,7 @@ static void hub_tt_work(struct work_struct *work) /* drop lock so HCD can concurrently report other TT errors */ spin_unlock_irqrestore (&hub->tt.lock, flags); status = hub_clear_tt_buffer (hdev, clear->devinfo, clear->tt); - if (status) + if (status && status != -ENODEV) dev_err (&hdev->dev, "clear tt %d (%04x) error %d\n", clear->tt, clear->devinfo, status); @@ -837,10 +838,11 @@ static int hub_hub_status(struct usb_hub *hub, mutex_lock(&hub->status_mutex); ret = get_hub_status(hub->hdev, &hub->status->hub); - if (ret < 0) - dev_err (hub->intfdev, - "%s failed (err = %d)\n", __func__, ret); - else { + if (ret < 0) { + if (ret != -ENODEV) + dev_err(hub->intfdev, + "%s failed (err = %d)\n", __func__, ret); + } else { *status = le16_to_cpu(hub->status->hub.wHubStatus); *change = le16_to_cpu(hub->status->hub.wHubChange); ret = 0; @@ -877,11 +879,8 @@ static int hub_usb3_port_disable(struct usb_hub *hub, int port1) return -EINVAL; ret = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_SS_DISABLED); - if (ret) { - dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n", - port1, ret); + if (ret) return ret; - } /* Wait for the link to enter the disabled state. */ for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) { @@ -918,7 +917,7 @@ static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) ret = usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE); } - if (ret) + if (ret && ret != -ENODEV) dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n", port1, ret); return ret; @@ -1317,6 +1316,10 @@ static int hub_configure(struct usb_hub *hub, message = "hub has too many ports!"; ret = -ENODEV; goto fail; + } else if (hub->descriptor->bNbrPorts == 0) { + message = "hub doesn't have any ports!"; + ret = -ENODEV; + goto fail; } hdev->maxchild = hub->descriptor->bNbrPorts; @@ -2192,8 +2195,9 @@ static int usb_enumerate_device(struct usb_device *udev) if (udev->config == NULL) { err = usb_get_configuration(udev); if (err < 0) { - dev_err(&udev->dev, "can't read configurations, error %d\n", - err); + if (err != -ENODEV) + dev_err(&udev->dev, "can't read configurations, error %d\n", + err); return err; } } @@ -2640,14 +2644,16 @@ static int hub_port_reset(struct usb_hub *hub, int port1, status = set_port_feature(hub->hdev, port1, (warm ? USB_PORT_FEAT_BH_PORT_RESET : USB_PORT_FEAT_RESET)); - if (status) { + if (status == -ENODEV) { + ; /* The hub is gone */ + } else if (status) { dev_err(hub->intfdev, "cannot %sreset port %d (err = %d)\n", warm ? "warm " : "", port1, status); } else { status = hub_port_wait_reset(hub, port1, udev, delay, warm); - if (status && status != -ENOTCONN) + if (status && status != -ENOTCONN && status != -ENODEV) dev_dbg(hub->intfdev, "port_wait_reset: err = %d\n", status); @@ -2821,7 +2827,7 @@ void usb_enable_ltm(struct usb_device *udev) } EXPORT_SYMBOL_GPL(usb_enable_ltm); -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM /* * usb_disable_function_remotewakeup - disable usb3.0 * device's function remote wakeup @@ -2880,9 +2886,11 @@ static int usb_disable_function_remotewakeup(struct usb_device *udev) * Linux (2.6) currently has NO mechanisms to initiate that: no khubd * timer, no SRP, no requests through sysfs. * - * If CONFIG_USB_SUSPEND isn't enabled, devices only really suspend when - * the root hub for their bus goes into global suspend ... so we don't - * (falsely) update the device power state to say it suspended. + * If Runtime PM isn't enabled or used, non-SuperSpeed devices really get + * suspended only when their bus goes into global suspend (i.e., the root + * hub is suspended). Nevertheless, we change @udev->state to + * USB_STATE_SUSPENDED as this is the device's "logical" state. The actual + * upstream port setting is stored in @udev->port_is_suspended. * * Returns 0 on success, else negative errno. */ @@ -2893,6 +2901,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) enum pm_qos_flags_status pm_qos_stat; int port1 = udev->portnum; int status; + bool really_suspend = true; /* enable remote wakeup when appropriate; this lets the device * wake up the upstream hub (including maybe the root hub). @@ -2949,9 +2958,19 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) /* see 7.1.7.6 */ if (hub_is_superspeed(hub->hdev)) status = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_U3); - else + else if (PMSG_IS_AUTO(msg)) status = set_port_feature(hub->hdev, port1, USB_PORT_FEAT_SUSPEND); + /* + * For system suspend, we do not need to enable the suspend feature + * on individual USB-2 ports. The devices will automatically go + * into suspend a few ms after the root hub stops sending packets. + * The USB 2.0 spec calls this "global suspend". + */ + else { + really_suspend = false; + status = 0; + } if (status) { dev_dbg(hub->intfdev, "can't suspend port %d, status %d\n", port1, status); @@ -2987,8 +3006,10 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) (PMSG_IS_AUTO(msg) ? "auto-" : ""), udev->do_remote_wakeup); usb_set_device_state(udev, USB_STATE_SUSPENDED); - udev->port_is_suspended = 1; - msleep(10); + if (really_suspend) { + udev->port_is_suspended = 1; + msleep(10); + } } /* @@ -3226,6 +3247,10 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) return status; } +#endif /* CONFIG_PM */ + +#ifdef CONFIG_PM_RUNTIME + /* caller has locked udev */ int usb_remote_wakeup(struct usb_device *udev) { @@ -3242,38 +3267,6 @@ int usb_remote_wakeup(struct usb_device *udev) return status; } -#else /* CONFIG_USB_SUSPEND */ - -/* When CONFIG_USB_SUSPEND isn't set, we never suspend or resume any ports. */ - -int usb_port_suspend(struct usb_device *udev, pm_message_t msg) -{ - return 0; -} - -/* However we may need to do a reset-resume */ - -int usb_port_resume(struct usb_device *udev, pm_message_t msg) -{ - struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent); - int port1 = udev->portnum; - int status; - u16 portchange, portstatus; - - status = hub_port_status(hub, port1, &portstatus, &portchange); - status = check_port_resume_type(udev, - hub, port1, status, portchange, portstatus); - - if (status) { - dev_dbg(&udev->dev, "can't resume, status %d\n", status); - hub_port_logical_disconnect(hub, port1); - } else if (udev->reset_resume) { - dev_dbg(&udev->dev, "reset-resume\n"); - status = usb_reset_and_verify_device(udev); - } - return status; -} - #endif static int check_ports_changed(struct usb_hub *hub) @@ -4090,9 +4083,9 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, goto fail; } if (r) { - dev_err(&udev->dev, - "device descriptor read/64, error %d\n", - r); + if (r != -ENODEV) + dev_err(&udev->dev, "device descriptor read/64, error %d\n", + r); retval = -EMSGSIZE; continue; } @@ -4112,9 +4105,9 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, msleep(200); } if (retval < 0) { - dev_err(&udev->dev, - "device not accepting address %d, error %d\n", - devnum, retval); + if (retval != -ENODEV) + dev_err(&udev->dev, "device not accepting address %d, error %d\n", + devnum, retval); goto fail; } if (udev->speed == USB_SPEED_SUPER) { @@ -4136,7 +4129,8 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, retval = usb_get_device_descriptor(udev, 8); if (retval < 8) { - dev_err(&udev->dev, + if (retval != -ENODEV) + dev_err(&udev->dev, "device descriptor read/8, error %d\n", retval); if (retval >= 0) @@ -4190,8 +4184,9 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE); if (retval < (signed)sizeof(udev->descriptor)) { - dev_err(&udev->dev, "device descriptor read/all, error %d\n", - retval); + if (retval != -ENODEV) + dev_err(&udev->dev, "device descriptor read/all, error %d\n", + retval); if (retval >= 0) retval = -ENOMSG; goto fail; @@ -4333,7 +4328,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, if (portstatus & USB_PORT_STAT_ENABLE) { status = 0; /* Nothing to do */ -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME } else if (udev->state == USB_STATE_SUSPENDED && udev->persist_enabled) { /* For a suspended device, treat this as a @@ -4373,7 +4368,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, USB_PORT_STAT_C_ENABLE)) { status = hub_port_debounce_be_stable(hub, port1); if (status < 0) { - if (printk_ratelimit()) + if (status != -ENODEV && printk_ratelimit()) dev_err(hub_dev, "connect-debounce failed, " "port %d disabled\n", port1); portstatus &= ~USB_PORT_STAT_CONNECTION; @@ -4402,6 +4397,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, else unit_load = 100; + status = 0; for (i = 0; i < SET_CONFIG_TRIES; i++) { /* reallocate for each attempt, since references @@ -4526,9 +4522,11 @@ loop: } if (hub->hdev->parent || !hcd->driver->port_handed_over || - !(hcd->driver->port_handed_over)(hcd, port1)) - dev_err(hub_dev, "unable to enumerate USB device on port %d\n", - port1); + !(hcd->driver->port_handed_over)(hcd, port1)) { + if (status != -ENOTCONN && status != -ENODEV) + dev_err(hub_dev, "unable to enumerate USB device on port %d\n", + port1); + } done: hub_port_disable(hub, port1, 1); diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 65d4e55552c6..b8bad294eeb8 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -70,7 +70,7 @@ static void usb_port_device_release(struct device *dev) kfree(port_dev); } -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME static int usb_port_runtime_resume(struct device *dev) { struct usb_port *port_dev = to_usb_port(dev); @@ -138,7 +138,7 @@ static int usb_port_runtime_suspend(struct device *dev) #endif static const struct dev_pm_ops usb_port_pm_ops = { -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME .runtime_suspend = usb_port_runtime_suspend, .runtime_resume = usb_port_runtime_resume, .runtime_idle = pm_generic_runtime_idle, diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 3113c1d71442..ab5638d9c707 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -201,20 +201,14 @@ void usb_detect_quirks(struct usb_device *udev) dev_dbg(&udev->dev, "USB quirks for this device: %x\n", udev->quirks); - /* For the present, all devices default to USB-PERSIST enabled */ -#if 0 /* was: #ifdef CONFIG_PM */ - /* Hubs are automatically enabled for USB-PERSIST */ - if (udev->descriptor.bDeviceClass == USB_CLASS_HUB) +#ifdef CONFIG_USB_DEFAULT_PERSIST + if (!(udev->quirks & USB_QUIRK_RESET)) udev->persist_enabled = 1; - #else - /* In the absence of PM, we can safely enable USB-PERSIST - * for all devices. It will affect things like hub resets - * and EMF-related port disables. - */ - if (!(udev->quirks & USB_QUIRK_RESET)) + /* Hubs are automatically enabled for USB-PERSIST */ + if (udev->descriptor.bDeviceClass == USB_CLASS_HUB) udev->persist_enabled = 1; -#endif /* CONFIG_PM */ +#endif /* CONFIG_USB_DEFAULT_PERSIST */ } void usb_detect_interface_quirks(struct usb_device *udev) diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 3f81a3dc6867..aa38db44818a 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -338,7 +338,7 @@ static void remove_persist_attributes(struct device *dev) #endif /* CONFIG_PM */ -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME static ssize_t show_connected_duration(struct device *dev, struct device_attribute *attr, @@ -544,7 +544,7 @@ static void remove_power_attributes(struct device *dev) #define add_power_attributes(dev) 0 #define remove_power_attributes(dev) do {} while (0) -#endif /* CONFIG_USB_SUSPEND */ +#endif /* CONFIG_PM_RUNTIME */ /* Descriptor fields */ diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index e0d9d948218c..16927fa88fbd 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -683,10 +683,13 @@ EXPORT_SYMBOL_GPL(usb_kill_urb); void usb_poison_urb(struct urb *urb) { might_sleep(); - if (!(urb && urb->dev && urb->ep)) + if (!urb) return; atomic_inc(&urb->reject); + if (!urb->dev || !urb->ep) + return; + usb_hcd_unlink_urb(urb, -ENOENT); wait_event(usb_kill_urb_queue, atomic_read(&urb->use_count) == 0); } diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index e092b414dc50..b10da720f2b4 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -49,7 +49,7 @@ const char *usbcore_name = "usbcore"; static bool nousb; /* Disable USB when built into kernel image */ -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME static int usb_autosuspend_delay = 2; /* Default delay value, * in seconds */ module_param_named(autosuspend, usb_autosuspend_delay, int, 0644); @@ -307,7 +307,7 @@ static const struct dev_pm_ops usb_device_pm_ops = { .thaw = usb_dev_thaw, .poweroff = usb_dev_poweroff, .restore = usb_dev_restore, -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME .runtime_suspend = usb_runtime_suspend, .runtime_resume = usb_runtime_resume, .runtime_idle = usb_runtime_idle, diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index a7f20bde0e5e..823857767a16 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -93,7 +93,7 @@ static inline int usb_port_resume(struct usb_device *udev, pm_message_t msg) #endif -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME extern void usb_autosuspend_device(struct usb_device *udev); extern int usb_autoresume_device(struct usb_device *udev); diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index 68e9a2c5a01a..ea5ee9c21c35 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -1,7 +1,6 @@ config USB_DWC3 tristate "DesignWare USB3 DRD Core Support" depends on (USB || USB_GADGET) && GENERIC_HARDIRQS - select USB_OTG_UTILS select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD help Say Y or M here if your system has a Dual Role SuperSpeed diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index ffa6b004a84b..c35d49d39b76 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -140,7 +140,8 @@ static void dwc3_free_one_event_buffer(struct dwc3 *dwc, * Returns a pointer to the allocated event buffer structure on success * otherwise ERR_PTR(errno). */ -static struct dwc3_event_buffer *dwc3_alloc_one_event_buffer(struct dwc3 *dwc, unsigned length) +static struct dwc3_event_buffer *dwc3_alloc_one_event_buffer(struct dwc3 *dwc, + unsigned length) { struct dwc3_event_buffer *evt; @@ -259,6 +260,17 @@ static void dwc3_event_buffers_cleanup(struct dwc3 *dwc) } } +static void dwc3_core_num_eps(struct dwc3 *dwc) +{ + struct dwc3_hwparams *parms = &dwc->hwparams; + + dwc->num_in_eps = DWC3_NUM_IN_EPS(parms); + dwc->num_out_eps = DWC3_NUM_EPS(parms) - dwc->num_in_eps; + + dev_vdbg(dwc->dev, "found %d IN and %d OUT endpoints\n", + dwc->num_in_eps, dwc->num_out_eps); +} + static void dwc3_cache_hwparams(struct dwc3 *dwc) { struct dwc3_hwparams *parms = &dwc->hwparams; @@ -335,13 +347,9 @@ static int dwc3_core_init(struct dwc3 *dwc) if (dwc->revision < DWC3_REVISION_190A) reg |= DWC3_GCTL_U2RSTECN; - dwc3_writel(dwc->regs, DWC3_GCTL, reg); + dwc3_core_num_eps(dwc); - ret = dwc3_event_buffers_setup(dwc); - if (ret) { - dev_err(dwc->dev, "failed to setup event buffers\n"); - goto err0; - } + dwc3_writel(dwc->regs, DWC3_GCTL, reg); return 0; @@ -351,8 +359,6 @@ err0: static void dwc3_core_exit(struct dwc3 *dwc) { - dwc3_event_buffers_cleanup(dwc); - usb_phy_shutdown(dwc->usb2_phy); usb_phy_shutdown(dwc->usb3_phy); } @@ -428,12 +434,32 @@ static int dwc3_probe(struct platform_device *pdev) dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3); } - if (IS_ERR_OR_NULL(dwc->usb2_phy)) { + if (IS_ERR(dwc->usb2_phy)) { + ret = PTR_ERR(dwc->usb2_phy); + + /* + * if -ENXIO is returned, it means PHY layer wasn't + * enabled, so it makes no sense to return -EPROBE_DEFER + * in that case, since no PHY driver will ever probe. + */ + if (ret == -ENXIO) + return ret; + dev_err(dev, "no usb2 phy configured\n"); return -EPROBE_DEFER; } - if (IS_ERR_OR_NULL(dwc->usb3_phy)) { + if (IS_ERR(dwc->usb3_phy)) { + ret = PTR_ERR(dwc->usb2_phy); + + /* + * if -ENXIO is returned, it means PHY layer wasn't + * enabled, so it makes no sense to return -EPROBE_DEFER + * in that case, since no PHY driver will ever probe. + */ + if (ret == -ENXIO) + return ret; + dev_err(dev, "no usb3 phy configured\n"); return -EPROBE_DEFER; } @@ -448,6 +474,10 @@ static int dwc3_probe(struct platform_device *pdev) dwc->regs_size = resource_size(res); dwc->dev = dev; + dev->dma_mask = dev->parent->dma_mask; + dev->dma_parms = dev->parent->dma_parms; + dma_set_coherent_mask(dev, dev->parent->coherent_dma_mask); + if (!strncmp("super", maximum_speed, 5)) dwc->maximum_speed = DWC3_DCFG_SUPERSPEED; else if (!strncmp("high", maximum_speed, 4)) @@ -480,7 +510,18 @@ static int dwc3_probe(struct platform_device *pdev) goto err0; } - mode = DWC3_MODE(dwc->hwparams.hwparams0); + ret = dwc3_event_buffers_setup(dwc); + if (ret) { + dev_err(dwc->dev, "failed to setup event buffers\n"); + goto err1; + } + + if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) + mode = DWC3_MODE_HOST; + else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) + mode = DWC3_MODE_DEVICE; + else + mode = DWC3_MODE_DRD; switch (mode) { case DWC3_MODE_DEVICE: @@ -488,7 +529,7 @@ static int dwc3_probe(struct platform_device *pdev) ret = dwc3_gadget_init(dwc); if (ret) { dev_err(dev, "failed to initialize gadget\n"); - goto err1; + goto err2; } break; case DWC3_MODE_HOST: @@ -496,7 +537,7 @@ static int dwc3_probe(struct platform_device *pdev) ret = dwc3_host_init(dwc); if (ret) { dev_err(dev, "failed to initialize host\n"); - goto err1; + goto err2; } break; case DWC3_MODE_DRD: @@ -504,32 +545,32 @@ static int dwc3_probe(struct platform_device *pdev) ret = dwc3_host_init(dwc); if (ret) { dev_err(dev, "failed to initialize host\n"); - goto err1; + goto err2; } ret = dwc3_gadget_init(dwc); if (ret) { dev_err(dev, "failed to initialize gadget\n"); - goto err1; + goto err2; } break; default: dev_err(dev, "Unsupported mode of operation %d\n", mode); - goto err1; + goto err2; } dwc->mode = mode; ret = dwc3_debugfs_init(dwc); if (ret) { dev_err(dev, "failed to initialize debugfs\n"); - goto err2; + goto err3; } pm_runtime_allow(dev); return 0; -err2: +err3: switch (mode) { case DWC3_MODE_DEVICE: dwc3_gadget_exit(dwc); @@ -546,6 +587,9 @@ err2: break; } +err2: + dwc3_event_buffers_cleanup(dwc); + err1: dwc3_core_exit(dwc); @@ -583,12 +627,130 @@ static int dwc3_remove(struct platform_device *pdev) break; } + dwc3_event_buffers_cleanup(dwc); dwc3_free_event_buffers(dwc); dwc3_core_exit(dwc); return 0; } +#ifdef CONFIG_PM_SLEEP +static int dwc3_prepare(struct device *dev) +{ + struct dwc3 *dwc = dev_get_drvdata(dev); + unsigned long flags; + + spin_lock_irqsave(&dwc->lock, flags); + + switch (dwc->mode) { + case DWC3_MODE_DEVICE: + case DWC3_MODE_DRD: + dwc3_gadget_prepare(dwc); + /* FALLTHROUGH */ + case DWC3_MODE_HOST: + default: + dwc3_event_buffers_cleanup(dwc); + break; + } + + spin_unlock_irqrestore(&dwc->lock, flags); + + return 0; +} + +static void dwc3_complete(struct device *dev) +{ + struct dwc3 *dwc = dev_get_drvdata(dev); + unsigned long flags; + + spin_lock_irqsave(&dwc->lock, flags); + + switch (dwc->mode) { + case DWC3_MODE_DEVICE: + case DWC3_MODE_DRD: + dwc3_gadget_complete(dwc); + /* FALLTHROUGH */ + case DWC3_MODE_HOST: + default: + dwc3_event_buffers_setup(dwc); + break; + } + + spin_unlock_irqrestore(&dwc->lock, flags); +} + +static int dwc3_suspend(struct device *dev) +{ + struct dwc3 *dwc = dev_get_drvdata(dev); + unsigned long flags; + + spin_lock_irqsave(&dwc->lock, flags); + + switch (dwc->mode) { + case DWC3_MODE_DEVICE: + case DWC3_MODE_DRD: + dwc3_gadget_suspend(dwc); + /* FALLTHROUGH */ + case DWC3_MODE_HOST: + default: + /* do nothing */ + break; + } + + dwc->gctl = dwc3_readl(dwc->regs, DWC3_GCTL); + spin_unlock_irqrestore(&dwc->lock, flags); + + usb_phy_shutdown(dwc->usb3_phy); + usb_phy_shutdown(dwc->usb2_phy); + + return 0; +} + +static int dwc3_resume(struct device *dev) +{ + struct dwc3 *dwc = dev_get_drvdata(dev); + unsigned long flags; + + usb_phy_init(dwc->usb3_phy); + usb_phy_init(dwc->usb2_phy); + msleep(100); + + spin_lock_irqsave(&dwc->lock, flags); + + dwc3_writel(dwc->regs, DWC3_GCTL, dwc->gctl); + + switch (dwc->mode) { + case DWC3_MODE_DEVICE: + case DWC3_MODE_DRD: + dwc3_gadget_resume(dwc); + /* FALLTHROUGH */ + case DWC3_MODE_HOST: + default: + /* do nothing */ + break; + } + + spin_unlock_irqrestore(&dwc->lock, flags); + + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + return 0; +} + +static const struct dev_pm_ops dwc3_dev_pm_ops = { + .prepare = dwc3_prepare, + .complete = dwc3_complete, + + SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume) +}; + +#define DWC3_PM_OPS &(dwc3_dev_pm_ops) +#else +#define DWC3_PM_OPS NULL +#endif + #ifdef CONFIG_OF static const struct of_device_id of_dwc3_match[] = { { @@ -605,6 +767,7 @@ static struct platform_driver dwc3_driver = { .driver = { .name = "dwc3", .of_match_table = of_match_ptr(of_dwc3_match), + .pm = DWC3_PM_OPS, }, }; diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index b41750660235..b69d322e3cab 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -154,8 +154,9 @@ /* OTG Registers */ #define DWC3_OCFG 0xcc00 #define DWC3_OCTL 0xcc04 -#define DWC3_OEVTEN 0xcc08 -#define DWC3_OSTS 0xcc0C +#define DWC3_OEVT 0xcc08 +#define DWC3_OEVTEN 0xcc0C +#define DWC3_OSTS 0xcc10 /* Bit fields */ @@ -369,6 +370,9 @@ struct dwc3_trb; * @list: a list of event buffers * @buf: _THE_ buffer * @length: size of this buffer + * @lpos: event offset + * @count: cache of last read event count register + * @flags: flags related to this event buffer * @dma: dma_addr_t * @dwc: pointer to DWC controller */ @@ -376,6 +380,10 @@ struct dwc3_event_buffer { void *buf; unsigned length; unsigned int lpos; + unsigned int count; + unsigned int flags; + +#define DWC3_EVENT_PENDING BIT(0) dma_addr_t dma; @@ -487,12 +495,6 @@ enum dwc3_link_state { DWC3_LINK_STATE_MASK = 0x0f, }; -enum dwc3_device_state { - DWC3_DEFAULT_STATE, - DWC3_ADDRESS_STATE, - DWC3_CONFIGURED_STATE, -}; - /* TRB Length, PCM and Status */ #define DWC3_TRB_SIZE_MASK (0x00ffffff) #define DWC3_TRB_SIZE_LENGTH(n) ((n) & DWC3_TRB_SIZE_MASK) @@ -574,6 +576,14 @@ struct dwc3_hwparams { /* HWPARAMS1 */ #define DWC3_NUM_INT(n) (((n) & (0x3f << 15)) >> 15) +/* HWPARAMS3 */ +#define DWC3_NUM_IN_EPS_MASK (0x1f << 18) +#define DWC3_NUM_EPS_MASK (0x3f << 12) +#define DWC3_NUM_EPS(p) (((p)->hwparams3 & \ + (DWC3_NUM_EPS_MASK)) >> 12) +#define DWC3_NUM_IN_EPS(p) (((p)->hwparams3 & \ + (DWC3_NUM_IN_EPS_MASK)) >> 18) + /* HWPARAMS7 */ #define DWC3_RAM1_DEPTH(n) ((n) & 0xffff) @@ -618,7 +628,6 @@ struct dwc3_scratchpad_array { * @gadget_driver: pointer to the gadget driver * @regs: base address for our registers * @regs_size: address space size - * @irq: IRQ number * @num_event_buffers: calculated number of event buffers * @u1u2: only used on revisions <1.83a for workaround * @maximum_speed: maximum speed requested (mainly for testing purposes) @@ -626,6 +635,8 @@ struct dwc3_scratchpad_array { * @mode: mode of operation * @usb2_phy: pointer to USB2 PHY * @usb3_phy: pointer to USB3 PHY + * @dcfg: saved contents of DCFG register + * @gctl: saved contents of GCTL register * @is_selfpowered: true when we are selfpowered * @three_stage_setup: set if we perform a three phase setup * @ep0_bounced: true when we used bounce buffer @@ -639,6 +650,8 @@ struct dwc3_scratchpad_array { * @u2pel: parameter from Set SEL request. * @u1sel: parameter from Set SEL request. * @u1pel: parameter from Set SEL request. + * @num_out_eps: number of out endpoints + * @num_in_eps: number of in endpoints * @ep0_next_event: hold the next expected event * @ep0state: state of endpoint zero * @link_state: link state @@ -656,8 +669,10 @@ struct dwc3 { dma_addr_t ep0_trb_addr; dma_addr_t ep0_bounce_addr; struct dwc3_request ep0_usb_req; + /* device lock */ spinlock_t lock; + struct device *dev; struct platform_device *xhci; @@ -675,6 +690,10 @@ struct dwc3 { void __iomem *regs; size_t regs_size; + /* used for suspend/resume */ + u32 dcfg; + u32 gctl; + u32 num_event_buffers; u32 u1u2; u32 maximum_speed; @@ -694,6 +713,9 @@ struct dwc3 { #define DWC3_REVISION_202A 0x5533202a #define DWC3_REVISION_210A 0x5533210a #define DWC3_REVISION_220A 0x5533220a +#define DWC3_REVISION_230A 0x5533230a +#define DWC3_REVISION_240A 0x5533240a +#define DWC3_REVISION_250A 0x5533250a unsigned is_selfpowered:1; unsigned three_stage_setup:1; @@ -704,11 +726,11 @@ struct dwc3 { unsigned delayed_status:1; unsigned needs_fifo_resize:1; unsigned resize_fifos:1; + unsigned pullups_connected:1; enum dwc3_ep0_next ep0_next_event; enum dwc3_ep0_state ep0state; enum dwc3_link_state link_state; - enum dwc3_device_state dev_state; u16 isoch_delay; u16 u2sel; @@ -718,6 +740,9 @@ struct dwc3 { u8 speed; + u8 num_out_eps; + u8 num_in_eps; + void *mem; struct dwc3_hwparams hwparams; @@ -884,4 +909,31 @@ static inline void dwc3_gadget_exit(struct dwc3 *dwc) { } #endif +/* power management interface */ +#if !IS_ENABLED(CONFIG_USB_DWC3_HOST) +int dwc3_gadget_prepare(struct dwc3 *dwc); +void dwc3_gadget_complete(struct dwc3 *dwc); +int dwc3_gadget_suspend(struct dwc3 *dwc); +int dwc3_gadget_resume(struct dwc3 *dwc); +#else +static inline int dwc3_gadget_prepare(struct dwc3 *dwc) +{ + return 0; +} + +static inline void dwc3_gadget_complete(struct dwc3 *dwc) +{ +} + +static inline int dwc3_gadget_suspend(struct dwc3 *dwc) +{ + return 0; +} + +static inline int dwc3_gadget_resume(struct dwc3 *dwc) +{ + return 0; +} +#endif /* !IS_ENABLED(CONFIG_USB_DWC3_HOST) */ + #endif /* __DRIVERS_USB_DWC3_CORE_H */ diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c index 4a752e730c5f..9e9f122162f2 100644 --- a/drivers/usb/dwc3/debugfs.c +++ b/drivers/usb/dwc3/debugfs.c @@ -59,7 +59,7 @@ .offset = DWC3_ ##nm - DWC3_GLOBALS_REGS_START, \ } -static struct debugfs_reg32 dwc3_regs[] = { +static const struct debugfs_reg32 dwc3_regs[] = { dump_register(GSBUSCFG0), dump_register(GSBUSCFG1), dump_register(GTXTHRCFG), @@ -372,6 +372,7 @@ static struct debugfs_reg32 dwc3_regs[] = { dump_register(OCFG), dump_register(OCTL), + dump_register(OEVT), dump_register(OEVTEN), dump_register(OSTS), }; @@ -577,8 +578,14 @@ static int dwc3_link_state_show(struct seq_file *s, void *unused) case DWC3_LINK_STATE_LPBK: seq_printf(s, "Loopback\n"); break; + case DWC3_LINK_STATE_RESET: + seq_printf(s, "Reset\n"); + break; + case DWC3_LINK_STATE_RESUME: + seq_printf(s, "Resume\n"); + break; default: - seq_printf(s, "UNKNOWN %d\n", reg); + seq_printf(s, "UNKNOWN %d\n", state); } return 0; @@ -661,28 +668,31 @@ int dwc3_debugfs_init(struct dwc3 *dwc) goto err1; } -#if IS_ENABLED(CONFIG_USB_DWC3_GADGET) - file = debugfs_create_file("mode", S_IRUGO | S_IWUSR, root, - dwc, &dwc3_mode_fops); - if (!file) { - ret = -ENOMEM; - goto err1; - } - - file = debugfs_create_file("testmode", S_IRUGO | S_IWUSR, root, - dwc, &dwc3_testmode_fops); - if (!file) { - ret = -ENOMEM; - goto err1; + if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)) { + file = debugfs_create_file("mode", S_IRUGO | S_IWUSR, root, + dwc, &dwc3_mode_fops); + if (!file) { + ret = -ENOMEM; + goto err1; + } } - file = debugfs_create_file("link_state", S_IRUGO | S_IWUSR, root, - dwc, &dwc3_link_state_fops); - if (!file) { - ret = -ENOMEM; - goto err1; + if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) || + IS_ENABLED(CONFIG_USB_DWC3_GADGET)) { + file = debugfs_create_file("testmode", S_IRUGO | S_IWUSR, root, + dwc, &dwc3_testmode_fops); + if (!file) { + ret = -ENOMEM; + goto err1; + } + + file = debugfs_create_file("link_state", S_IRUGO | S_IWUSR, root, + dwc, &dwc3_link_state_fops); + if (!file) { + ret = -ENOMEM; + goto err1; + } } -#endif return 0; diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index b082bec7343e..a8afe6e26621 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -22,9 +22,9 @@ #include <linux/usb/otg.h> #include <linux/usb/nop-usb-xceiv.h> #include <linux/of.h> +#include <linux/of_platform.h> struct dwc3_exynos { - struct platform_device *dwc3; struct platform_device *usb2_phy; struct platform_device *usb3_phy; struct device *dev; @@ -86,21 +86,30 @@ err1: return ret; } +static int dwc3_exynos_remove_child(struct device *dev, void *unused) +{ + struct platform_device *pdev = to_platform_device(dev); + + platform_device_unregister(pdev); + + return 0; +} + static u64 dwc3_exynos_dma_mask = DMA_BIT_MASK(32); static int dwc3_exynos_probe(struct platform_device *pdev) { - struct platform_device *dwc3; struct dwc3_exynos *exynos; struct clk *clk; struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; int ret = -ENOMEM; exynos = devm_kzalloc(dev, sizeof(*exynos), GFP_KERNEL); if (!exynos) { dev_err(dev, "not enough memory\n"); - return -ENOMEM; + goto err1; } /* @@ -108,21 +117,15 @@ static int dwc3_exynos_probe(struct platform_device *pdev) * Since shared usb code relies on it, set it here for now. * Once we move to full device tree support this will vanish off. */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &dwc3_exynos_dma_mask; + if (!dev->dma_mask) + dev->dma_mask = &dwc3_exynos_dma_mask; platform_set_drvdata(pdev, exynos); ret = dwc3_exynos_register_phys(exynos); if (ret) { dev_err(dev, "couldn't register PHYs\n"); - return ret; - } - - dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO); - if (!dwc3) { - dev_err(dev, "couldn't allocate dwc3 device\n"); - return -ENOMEM; + goto err1; } clk = devm_clk_get(dev, "usbdrd30"); @@ -132,37 +135,28 @@ static int dwc3_exynos_probe(struct platform_device *pdev) goto err1; } - dma_set_coherent_mask(&dwc3->dev, dev->coherent_dma_mask); - - dwc3->dev.parent = dev; - dwc3->dev.dma_mask = dev->dma_mask; - dwc3->dev.dma_parms = dev->dma_parms; - exynos->dwc3 = dwc3; exynos->dev = dev; exynos->clk = clk; - clk_enable(exynos->clk); - - ret = platform_device_add_resources(dwc3, pdev->resource, - pdev->num_resources); - if (ret) { - dev_err(dev, "couldn't add resources to dwc3 device\n"); - goto err2; - } - - ret = platform_device_add(dwc3); - if (ret) { - dev_err(dev, "failed to register dwc3 device\n"); + clk_prepare_enable(exynos->clk); + + if (node) { + ret = of_platform_populate(node, NULL, NULL, dev); + if (ret) { + dev_err(dev, "failed to add dwc3 core\n"); + goto err2; + } + } else { + dev_err(dev, "no device node, failed to add dwc3 core\n"); + ret = -ENODEV; goto err2; } return 0; err2: - clk_disable(clk); + clk_disable_unprepare(clk); err1: - platform_device_put(dwc3); - return ret; } @@ -170,11 +164,11 @@ static int dwc3_exynos_remove(struct platform_device *pdev) { struct dwc3_exynos *exynos = platform_get_drvdata(pdev); - platform_device_unregister(exynos->dwc3); platform_device_unregister(exynos->usb2_phy); platform_device_unregister(exynos->usb3_phy); + device_for_each_child(&pdev->dev, NULL, dwc3_exynos_remove_child); - clk_disable(exynos->clk); + clk_disable_unprepare(exynos->clk); return 0; } @@ -187,12 +181,46 @@ static const struct of_device_id exynos_dwc3_match[] = { MODULE_DEVICE_TABLE(of, exynos_dwc3_match); #endif +#ifdef CONFIG_PM_SLEEP +static int dwc3_exynos_suspend(struct device *dev) +{ + struct dwc3_exynos *exynos = dev_get_drvdata(dev); + + clk_disable(exynos->clk); + + return 0; +} + +static int dwc3_exynos_resume(struct device *dev) +{ + struct dwc3_exynos *exynos = dev_get_drvdata(dev); + + clk_enable(exynos->clk); + + /* runtime set active to reflect active state. */ + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + return 0; +} + +static const struct dev_pm_ops dwc3_exynos_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(dwc3_exynos_suspend, dwc3_exynos_resume) +}; + +#define DEV_PM_OPS (&dwc3_exynos_dev_pm_ops) +#else +#define DEV_PM_OPS NULL +#endif /* CONFIG_PM_SLEEP */ + static struct platform_driver dwc3_exynos_driver = { .probe = dwc3_exynos_probe, .remove = dwc3_exynos_remove, .driver = { .name = "exynos-dwc3", .of_match_table = of_match_ptr(exynos_dwc3_match), + .pm = DEV_PM_OPS, }, }; diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index afa05e3c9cf4..34638b92500d 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -52,7 +52,6 @@ #include <linux/of_platform.h> #include <linux/usb/otg.h> -#include <linux/usb/nop-usb-xceiv.h> /* * All these registers belong to OMAP's Wrapper around the @@ -117,20 +116,17 @@ struct dwc3_omap { /* device lock */ spinlock_t lock; - struct platform_device *usb2_phy; - struct platform_device *usb3_phy; struct device *dev; int irq; void __iomem *base; - void *context; - u32 resource_size; + u32 utmi_otg_status; u32 dma_status:1; }; -struct dwc3_omap *_omap; +static struct dwc3_omap *_omap; static inline u32 dwc3_omap_readl(void __iomem *base, u32 offset) { @@ -142,11 +138,14 @@ static inline void dwc3_omap_writel(void __iomem *base, u32 offset, u32 value) writel(value, base + offset); } -void dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status) +int dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status) { u32 val; struct dwc3_omap *omap = _omap; + if (!omap) + return -EPROBE_DEFER; + switch (status) { case OMAP_DWC3_ID_GROUND: dev_dbg(omap->dev, "ID GND\n"); @@ -189,63 +188,9 @@ void dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status) dev_dbg(omap->dev, "ID float\n"); } - return; -} -EXPORT_SYMBOL_GPL(dwc3_omap_mailbox); - -static int dwc3_omap_register_phys(struct dwc3_omap *omap) -{ - struct nop_usb_xceiv_platform_data pdata; - struct platform_device *pdev; - int ret; - - memset(&pdata, 0x00, sizeof(pdata)); - - pdev = platform_device_alloc("nop_usb_xceiv", PLATFORM_DEVID_AUTO); - if (!pdev) - return -ENOMEM; - - omap->usb2_phy = pdev; - pdata.type = USB_PHY_TYPE_USB2; - - ret = platform_device_add_data(omap->usb2_phy, &pdata, sizeof(pdata)); - if (ret) - goto err1; - - pdev = platform_device_alloc("nop_usb_xceiv", PLATFORM_DEVID_AUTO); - if (!pdev) { - ret = -ENOMEM; - goto err1; - } - - omap->usb3_phy = pdev; - pdata.type = USB_PHY_TYPE_USB3; - - ret = platform_device_add_data(omap->usb3_phy, &pdata, sizeof(pdata)); - if (ret) - goto err2; - - ret = platform_device_add(omap->usb2_phy); - if (ret) - goto err2; - - ret = platform_device_add(omap->usb3_phy); - if (ret) - goto err3; - return 0; - -err3: - platform_device_del(omap->usb2_phy); - -err2: - platform_device_put(omap->usb3_phy); - -err1: - platform_device_put(omap->usb2_phy); - - return ret; } +EXPORT_SYMBOL_GPL(dwc3_omap_mailbox); static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap) { @@ -307,24 +252,57 @@ static int dwc3_omap_remove_core(struct device *dev, void *c) return 0; } +static void dwc3_omap_enable_irqs(struct dwc3_omap *omap) +{ + u32 reg; + + /* enable all IRQs */ + reg = USBOTGSS_IRQO_COREIRQ_ST; + dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, reg); + + reg = (USBOTGSS_IRQ1_OEVT | + USBOTGSS_IRQ1_DRVVBUS_RISE | + USBOTGSS_IRQ1_CHRGVBUS_RISE | + USBOTGSS_IRQ1_DISCHRGVBUS_RISE | + USBOTGSS_IRQ1_IDPULLUP_RISE | + USBOTGSS_IRQ1_DRVVBUS_FALL | + USBOTGSS_IRQ1_CHRGVBUS_FALL | + USBOTGSS_IRQ1_DISCHRGVBUS_FALL | + USBOTGSS_IRQ1_IDPULLUP_FALL); + + dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, reg); +} + +static void dwc3_omap_disable_irqs(struct dwc3_omap *omap) +{ + /* disable all IRQs */ + dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, 0x00); + dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, 0x00); +} + +static u64 dwc3_omap_dma_mask = DMA_BIT_MASK(32); + static int dwc3_omap_probe(struct platform_device *pdev) { - struct dwc3_omap_data *pdata = pdev->dev.platform_data; struct device_node *node = pdev->dev.of_node; struct dwc3_omap *omap; struct resource *res; struct device *dev = &pdev->dev; - int size; int ret = -ENOMEM; int irq; - const u32 *utmi_mode; + int utmi_mode = 0; + u32 reg; void __iomem *base; - void *context; + + if (!node) { + dev_err(dev, "device node not found\n"); + return -EINVAL; + } omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL); if (!omap) { @@ -334,13 +312,13 @@ static int dwc3_omap_probe(struct platform_device *pdev) platform_set_drvdata(pdev, omap); - irq = platform_get_irq(pdev, 1); + irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(dev, "missing IRQ resource\n"); return -EINVAL; } - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(dev, "missing memory base resource\n"); return -EINVAL; @@ -352,25 +330,12 @@ static int dwc3_omap_probe(struct platform_device *pdev) return -ENOMEM; } - ret = dwc3_omap_register_phys(omap); - if (ret) { - dev_err(dev, "couldn't register PHYs\n"); - return ret; - } - - context = devm_kzalloc(dev, resource_size(res), GFP_KERNEL); - if (!context) { - dev_err(dev, "couldn't allocate dwc3 context memory\n"); - return -ENOMEM; - } - spin_lock_init(&omap->lock); - omap->resource_size = resource_size(res); - omap->context = context; omap->dev = dev; omap->irq = irq; omap->base = base; + dev->dma_mask = &dwc3_omap_dma_mask; /* * REVISIT if we ever have two instances of the wrapper, we will be @@ -387,25 +352,17 @@ static int dwc3_omap_probe(struct platform_device *pdev) reg = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS); - utmi_mode = of_get_property(node, "utmi-mode", &size); - if (utmi_mode && size == sizeof(*utmi_mode)) { - reg |= *utmi_mode; - } else { - if (!pdata) { - dev_dbg(dev, "missing platform data\n"); - } else { - switch (pdata->utmi_mode) { - case DWC3_OMAP_UTMI_MODE_SW: - reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE; - break; - case DWC3_OMAP_UTMI_MODE_HW: - reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE; - break; - default: - dev_dbg(dev, "UNKNOWN utmi mode %d\n", - pdata->utmi_mode); - } - } + of_property_read_u32(node, "utmi-mode", &utmi_mode); + + switch (utmi_mode) { + case DWC3_OMAP_UTMI_MODE_SW: + reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE; + break; + case DWC3_OMAP_UTMI_MODE_HW: + reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE; + break; + default: + dev_dbg(dev, "UNKNOWN utmi mode %d\n", utmi_mode); } dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, reg); @@ -422,29 +379,12 @@ static int dwc3_omap_probe(struct platform_device *pdev) return ret; } - /* enable all IRQs */ - reg = USBOTGSS_IRQO_COREIRQ_ST; - dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, reg); + dwc3_omap_enable_irqs(omap); - reg = (USBOTGSS_IRQ1_OEVT | - USBOTGSS_IRQ1_DRVVBUS_RISE | - USBOTGSS_IRQ1_CHRGVBUS_RISE | - USBOTGSS_IRQ1_DISCHRGVBUS_RISE | - USBOTGSS_IRQ1_IDPULLUP_RISE | - USBOTGSS_IRQ1_DRVVBUS_FALL | - USBOTGSS_IRQ1_CHRGVBUS_FALL | - USBOTGSS_IRQ1_DISCHRGVBUS_FALL | - USBOTGSS_IRQ1_IDPULLUP_FALL); - - dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, reg); - - if (node) { - ret = of_platform_populate(node, NULL, NULL, dev); - if (ret) { - dev_err(&pdev->dev, - "failed to add create dwc3 core\n"); - return ret; - } + ret = of_platform_populate(node, NULL, NULL, dev); + if (ret) { + dev_err(&pdev->dev, "failed to create dwc3 core\n"); + return ret; } return 0; @@ -454,8 +394,7 @@ static int dwc3_omap_remove(struct platform_device *pdev) { struct dwc3_omap *omap = platform_get_drvdata(pdev); - platform_device_unregister(omap->usb2_phy); - platform_device_unregister(omap->usb3_phy); + dwc3_omap_disable_irqs(omap); pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); device_for_each_child(&pdev->dev, NULL, dwc3_omap_remove_core); @@ -465,18 +404,72 @@ static int dwc3_omap_remove(struct platform_device *pdev) static const struct of_device_id of_dwc3_match[] = { { - "ti,dwc3", + .compatible = "ti,dwc3" }, { }, }; MODULE_DEVICE_TABLE(of, of_dwc3_match); +#ifdef CONFIG_PM_SLEEP +static int dwc3_omap_prepare(struct device *dev) +{ + struct dwc3_omap *omap = dev_get_drvdata(dev); + + dwc3_omap_disable_irqs(omap); + + return 0; +} + +static void dwc3_omap_complete(struct device *dev) +{ + struct dwc3_omap *omap = dev_get_drvdata(dev); + + dwc3_omap_enable_irqs(omap); +} + +static int dwc3_omap_suspend(struct device *dev) +{ + struct dwc3_omap *omap = dev_get_drvdata(dev); + + omap->utmi_otg_status = dwc3_omap_readl(omap->base, + USBOTGSS_UTMI_OTG_STATUS); + + return 0; +} + +static int dwc3_omap_resume(struct device *dev) +{ + struct dwc3_omap *omap = dev_get_drvdata(dev); + + dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, + omap->utmi_otg_status); + + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + return 0; +} + +static const struct dev_pm_ops dwc3_omap_dev_pm_ops = { + .prepare = dwc3_omap_prepare, + .complete = dwc3_omap_complete, + + SET_SYSTEM_SLEEP_PM_OPS(dwc3_omap_suspend, dwc3_omap_resume) +}; + +#define DEV_PM_OPS (&dwc3_omap_dev_pm_ops) +#else +#define DEV_PM_OPS NULL +#endif /* CONFIG_PM_SLEEP */ + static struct platform_driver dwc3_omap_driver = { .probe = dwc3_omap_probe, .remove = dwc3_omap_remove, .driver = { .name = "omap-dwc3", .of_match_table = of_dwc3_match, + .pm = DEV_PM_OPS, }, }; diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index e8d77689a322..227d4a7acad7 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -212,11 +212,49 @@ static DEFINE_PCI_DEVICE_TABLE(dwc3_pci_id_table) = { }; MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table); +#ifdef CONFIG_PM +static int dwc3_pci_suspend(struct device *dev) +{ + struct pci_dev *pci = to_pci_dev(dev); + + pci_disable_device(pci); + + return 0; +} + +static int dwc3_pci_resume(struct device *dev) +{ + struct pci_dev *pci = to_pci_dev(dev); + int ret; + + ret = pci_enable_device(pci); + if (ret) { + dev_err(dev, "can't re-enable device --> %d\n", ret); + return ret; + } + + pci_set_master(pci); + + return 0; +} + +static const struct dev_pm_ops dwc3_pci_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(dwc3_pci_suspend, dwc3_pci_resume) +}; + +#define DEV_PM_OPS (&dwc3_pci_dev_pm_ops) +#else +#define DEV_PM_OPS NULL +#endif /* CONFIG_PM */ + static struct pci_driver dwc3_pci_driver = { .name = "dwc3-pci", .id_table = dwc3_pci_id_table, .probe = dwc3_pci_probe, .remove = dwc3_pci_remove, + .driver = { + .pm = DEV_PM_OPS, + }, }; MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 1d139ca05ef1..5acbb948b704 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -394,10 +394,13 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc, u32 wIndex; u32 reg; int ret; + enum usb_device_state state; wValue = le16_to_cpu(ctrl->wValue); wIndex = le16_to_cpu(ctrl->wIndex); recip = ctrl->bRequestType & USB_RECIP_MASK; + state = dwc->gadget.state; + switch (recip) { case USB_RECIP_DEVICE: @@ -409,7 +412,7 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc, * default control pipe */ case USB_DEVICE_U1_ENABLE: - if (dwc->dev_state != DWC3_CONFIGURED_STATE) + if (state != USB_STATE_CONFIGURED) return -EINVAL; if (dwc->speed != DWC3_DSTS_SUPERSPEED) return -EINVAL; @@ -423,7 +426,7 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc, break; case USB_DEVICE_U2_ENABLE: - if (dwc->dev_state != DWC3_CONFIGURED_STATE) + if (state != USB_STATE_CONFIGURED) return -EINVAL; if (dwc->speed != DWC3_DSTS_SUPERSPEED) return -EINVAL; @@ -493,6 +496,7 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc, static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) { + enum usb_device_state state = dwc->gadget.state; u32 addr; u32 reg; @@ -502,7 +506,7 @@ static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) return -EINVAL; } - if (dwc->dev_state == DWC3_CONFIGURED_STATE) { + if (state == USB_STATE_CONFIGURED) { dev_dbg(dwc->dev, "trying to set address when configured\n"); return -EINVAL; } @@ -513,9 +517,9 @@ static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) dwc3_writel(dwc->regs, DWC3_DCFG, reg); if (addr) - dwc->dev_state = DWC3_ADDRESS_STATE; + usb_gadget_set_state(&dwc->gadget, USB_STATE_ADDRESS); else - dwc->dev_state = DWC3_DEFAULT_STATE; + usb_gadget_set_state(&dwc->gadget, USB_STATE_DEFAULT); return 0; } @@ -532,6 +536,7 @@ static int dwc3_ep0_delegate_req(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) { + enum usb_device_state state = dwc->gadget.state; u32 cfg; int ret; u32 reg; @@ -539,16 +544,18 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) dwc->start_config_issued = false; cfg = le16_to_cpu(ctrl->wValue); - switch (dwc->dev_state) { - case DWC3_DEFAULT_STATE: + switch (state) { + case USB_STATE_DEFAULT: return -EINVAL; break; - case DWC3_ADDRESS_STATE: + case USB_STATE_ADDRESS: ret = dwc3_ep0_delegate_req(dwc, ctrl); /* if the cfg matches and the cfg is non zero */ if (cfg && (!ret || (ret == USB_GADGET_DELAYED_STATUS))) { - dwc->dev_state = DWC3_CONFIGURED_STATE; + usb_gadget_set_state(&dwc->gadget, + USB_STATE_CONFIGURED); + /* * Enable transition to U1/U2 state when * nothing is pending from application. @@ -562,10 +569,11 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) } break; - case DWC3_CONFIGURED_STATE: + case USB_STATE_CONFIGURED: ret = dwc3_ep0_delegate_req(dwc, ctrl); if (!cfg) - dwc->dev_state = DWC3_ADDRESS_STATE; + usb_gadget_set_state(&dwc->gadget, + USB_STATE_ADDRESS); break; default: ret = -EINVAL; @@ -620,10 +628,11 @@ static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req) static int dwc3_ep0_set_sel(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) { struct dwc3_ep *dep; + enum usb_device_state state = dwc->gadget.state; u16 wLength; u16 wValue; - if (dwc->dev_state == DWC3_DEFAULT_STATE) + if (state == USB_STATE_DEFAULT) return -EINVAL; wValue = le16_to_cpu(ctrl->wValue); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 82e160e96fca..2b6e7e001207 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1425,8 +1425,10 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on) if (dwc->revision >= DWC3_REVISION_194A) reg &= ~DWC3_DCTL_KEEP_CONNECT; reg |= DWC3_DCTL_RUN_STOP; + dwc->pullups_connected = true; } else { reg &= ~DWC3_DCTL_RUN_STOP; + dwc->pullups_connected = false; } dwc3_writel(dwc->regs, DWC3_DCTL, reg); @@ -1469,6 +1471,33 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) return ret; } +static void dwc3_gadget_enable_irq(struct dwc3 *dwc) +{ + u32 reg; + + /* Enable all but Start and End of Frame IRQs */ + reg = (DWC3_DEVTEN_VNDRDEVTSTRCVEDEN | + DWC3_DEVTEN_EVNTOVERFLOWEN | + DWC3_DEVTEN_CMDCMPLTEN | + DWC3_DEVTEN_ERRTICERREN | + DWC3_DEVTEN_WKUPEVTEN | + DWC3_DEVTEN_ULSTCNGEN | + DWC3_DEVTEN_CONNECTDONEEN | + DWC3_DEVTEN_USBRSTEN | + DWC3_DEVTEN_DISCONNEVTEN); + + dwc3_writel(dwc->regs, DWC3_DEVTEN, reg); +} + +static void dwc3_gadget_disable_irq(struct dwc3 *dwc) +{ + /* mask all interrupts */ + dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00); +} + +static irqreturn_t dwc3_interrupt(int irq, void *_dwc); +static irqreturn_t dwc3_thread_interrupt(int irq, void *_dwc); + static int dwc3_gadget_start(struct usb_gadget *g, struct usb_gadget_driver *driver) { @@ -1476,6 +1505,7 @@ static int dwc3_gadget_start(struct usb_gadget *g, struct dwc3_ep *dep; unsigned long flags; int ret = 0; + int irq; u32 reg; spin_lock_irqsave(&dwc->lock, flags); @@ -1489,7 +1519,6 @@ static int dwc3_gadget_start(struct usb_gadget *g, } dwc->gadget_driver = driver; - dwc->gadget.dev.driver = &driver->driver; reg = dwc3_readl(dwc->regs, DWC3_DCFG); reg &= ~(DWC3_DCFG_SPEED_MASK); @@ -1536,6 +1565,17 @@ static int dwc3_gadget_start(struct usb_gadget *g, dwc->ep0state = EP0_SETUP_PHASE; dwc3_ep0_out_start(dwc); + irq = platform_get_irq(to_platform_device(dwc->dev), 0); + ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt, + IRQF_SHARED | IRQF_ONESHOT, "dwc3", dwc); + if (ret) { + dev_err(dwc->dev, "failed to request irq #%d --> %d\n", + irq, ret); + goto err1; + } + + dwc3_gadget_enable_irq(dwc); + spin_unlock_irqrestore(&dwc->lock, flags); return 0; @@ -1554,14 +1594,18 @@ static int dwc3_gadget_stop(struct usb_gadget *g, { struct dwc3 *dwc = gadget_to_dwc(g); unsigned long flags; + int irq; spin_lock_irqsave(&dwc->lock, flags); + dwc3_gadget_disable_irq(dwc); + irq = platform_get_irq(to_platform_device(dwc->dev), 0); + free_irq(irq, dwc); + __dwc3_gadget_ep_disable(dwc->eps[0]); __dwc3_gadget_ep_disable(dwc->eps[1]); dwc->gadget_driver = NULL; - dwc->gadget.dev.driver = NULL; spin_unlock_irqrestore(&dwc->lock, flags); @@ -1579,14 +1623,15 @@ static const struct usb_gadget_ops dwc3_gadget_ops = { /* -------------------------------------------------------------------------- */ -static int dwc3_gadget_init_endpoints(struct dwc3 *dwc) +static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc, + u8 num, u32 direction) { struct dwc3_ep *dep; - u8 epnum; + u8 i; - INIT_LIST_HEAD(&dwc->gadget.ep_list); + for (i = 0; i < num; i++) { + u8 epnum = (i << 1) | (!!direction); - for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) { dep = kzalloc(sizeof(*dep), GFP_KERNEL); if (!dep) { dev_err(dwc->dev, "can't allocate endpoint %d\n", @@ -1600,6 +1645,7 @@ static int dwc3_gadget_init_endpoints(struct dwc3 *dwc) snprintf(dep->name, sizeof(dep->name), "ep%d%s", epnum >> 1, (epnum & 1) ? "in" : "out"); + dep->endpoint.name = dep->name; dep->direction = (epnum & 1); @@ -1630,6 +1676,27 @@ static int dwc3_gadget_init_endpoints(struct dwc3 *dwc) return 0; } +static int dwc3_gadget_init_endpoints(struct dwc3 *dwc) +{ + int ret; + + INIT_LIST_HEAD(&dwc->gadget.ep_list); + + ret = dwc3_gadget_init_hw_endpoints(dwc, dwc->num_out_eps, 0); + if (ret < 0) { + dev_vdbg(dwc->dev, "failed to allocate OUT endpoints\n"); + return ret; + } + + ret = dwc3_gadget_init_hw_endpoints(dwc, dwc->num_in_eps, 1); + if (ret < 0) { + dev_vdbg(dwc->dev, "failed to allocate IN endpoints\n"); + return ret; + } + + return 0; +} + static void dwc3_gadget_free_endpoints(struct dwc3 *dwc) { struct dwc3_ep *dep; @@ -1637,6 +1704,9 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc) for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) { dep = dwc->eps[epnum]; + if (!dep) + continue; + dwc3_free_trb_pool(dep); if (epnum != 0 && epnum != 1) @@ -1646,12 +1716,8 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc) } } -static void dwc3_gadget_release(struct device *dev) -{ - dev_dbg(dev, "%s\n", __func__); -} - /* -------------------------------------------------------------------------- */ + static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, struct dwc3_request *req, struct dwc3_trb *trb, const struct dwc3_event_depevt *event, int status) @@ -1975,6 +2041,9 @@ static void dwc3_stop_active_transfers(struct dwc3 *dwc) struct dwc3_ep *dep; dep = dwc->eps[epnum]; + if (!dep) + continue; + if (!(dep->flags & DWC3_EP_ENABLED)) continue; @@ -1992,6 +2061,8 @@ static void dwc3_clear_stall_all_ep(struct dwc3 *dwc) int ret; dep = dwc->eps[epnum]; + if (!dep) + continue; if (!(dep->flags & DWC3_EP_STALL)) continue; @@ -2091,7 +2162,7 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) } /* after reset -> Default State */ - dwc->dev_state = DWC3_DEFAULT_STATE; + usb_gadget_set_state(&dwc->gadget, USB_STATE_DEFAULT); /* Recent versions support automatic phy suspend and don't need this */ if (dwc->revision < DWC3_REVISION_194A) { @@ -2277,6 +2348,34 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc, unsigned int evtinfo) { enum dwc3_link_state next = evtinfo & DWC3_LINK_STATE_MASK; + unsigned int pwropt; + + /* + * WORKAROUND: DWC3 < 2.50a have an issue when configured without + * Hibernation mode enabled which would show up when device detects + * host-initiated U3 exit. + * + * In that case, device will generate a Link State Change Interrupt + * from U3 to RESUME which is only necessary if Hibernation is + * configured in. + * + * There are no functional changes due to such spurious event and we + * just need to ignore it. + * + * Refers to: + * + * STAR#9000570034 RTL: SS Resume event generated in non-Hibernation + * operational mode + */ + pwropt = DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1); + if ((dwc->revision < DWC3_REVISION_250A) && + (pwropt != DWC3_GHWPARAMS1_EN_PWROPT_HIB)) { + if ((dwc->link_state == DWC3_LINK_STATE_U3) && + (next == DWC3_LINK_STATE_RESUME)) { + dev_vdbg(dwc->dev, "ignoring transition U3 -> Resume\n"); + return; + } + } /* * WORKAROUND: DWC3 Revisions <1.83a have an issue which, depending @@ -2387,40 +2486,73 @@ static void dwc3_process_event_entry(struct dwc3 *dwc, } } +static irqreturn_t dwc3_thread_interrupt(int irq, void *_dwc) +{ + struct dwc3 *dwc = _dwc; + unsigned long flags; + irqreturn_t ret = IRQ_NONE; + int i; + + spin_lock_irqsave(&dwc->lock, flags); + + for (i = 0; i < dwc->num_event_buffers; i++) { + struct dwc3_event_buffer *evt; + int left; + + evt = dwc->ev_buffs[i]; + left = evt->count; + + if (!(evt->flags & DWC3_EVENT_PENDING)) + continue; + + while (left > 0) { + union dwc3_event event; + + event.raw = *(u32 *) (evt->buf + evt->lpos); + + dwc3_process_event_entry(dwc, &event); + + /* + * FIXME we wrap around correctly to the next entry as + * almost all entries are 4 bytes in size. There is one + * entry which has 12 bytes which is a regular entry + * followed by 8 bytes data. ATM I don't know how + * things are organized if we get next to the a + * boundary so I worry about that once we try to handle + * that. + */ + evt->lpos = (evt->lpos + 4) % DWC3_EVENT_BUFFERS_SIZE; + left -= 4; + + dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(i), 4); + } + + evt->count = 0; + evt->flags &= ~DWC3_EVENT_PENDING; + ret = IRQ_HANDLED; + } + + spin_unlock_irqrestore(&dwc->lock, flags); + + return ret; +} + static irqreturn_t dwc3_process_event_buf(struct dwc3 *dwc, u32 buf) { struct dwc3_event_buffer *evt; - int left; u32 count; + evt = dwc->ev_buffs[buf]; + count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(buf)); count &= DWC3_GEVNTCOUNT_MASK; if (!count) return IRQ_NONE; - evt = dwc->ev_buffs[buf]; - left = count; - - while (left > 0) { - union dwc3_event event; - - event.raw = *(u32 *) (evt->buf + evt->lpos); + evt->count = count; + evt->flags |= DWC3_EVENT_PENDING; - dwc3_process_event_entry(dwc, &event); - /* - * XXX we wrap around correctly to the next entry as almost all - * entries are 4 bytes in size. There is one entry which has 12 - * bytes which is a regular entry followed by 8 bytes data. ATM - * I don't know how things are organized if were get next to the - * a boundary so I worry about that once we try to handle that. - */ - evt->lpos = (evt->lpos + 4) % DWC3_EVENT_BUFFERS_SIZE; - left -= 4; - - dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(buf), 4); - } - - return IRQ_HANDLED; + return IRQ_WAKE_THREAD; } static irqreturn_t dwc3_interrupt(int irq, void *_dwc) @@ -2435,7 +2567,7 @@ static irqreturn_t dwc3_interrupt(int irq, void *_dwc) irqreturn_t status; status = dwc3_process_event_buf(dwc, i); - if (status == IRQ_HANDLED) + if (status == IRQ_WAKE_THREAD) ret = status; } @@ -2454,7 +2586,6 @@ int dwc3_gadget_init(struct dwc3 *dwc) { u32 reg; int ret; - int irq; dwc->ctrl_req = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ctrl_req), &dwc->ctrl_req_addr, GFP_KERNEL); @@ -2488,19 +2619,10 @@ int dwc3_gadget_init(struct dwc3 *dwc) goto err3; } - dev_set_name(&dwc->gadget.dev, "gadget"); - dwc->gadget.ops = &dwc3_gadget_ops; dwc->gadget.max_speed = USB_SPEED_SUPER; dwc->gadget.speed = USB_SPEED_UNKNOWN; - dwc->gadget.dev.parent = dwc->dev; dwc->gadget.sg_supported = true; - - dma_set_coherent_mask(&dwc->gadget.dev, dwc->dev->coherent_dma_mask); - - dwc->gadget.dev.dma_parms = dwc->dev->dma_parms; - dwc->gadget.dev.dma_mask = dwc->dev->dma_mask; - dwc->gadget.dev.release = dwc3_gadget_release; dwc->gadget.name = "dwc3-gadget"; /* @@ -2512,60 +2634,24 @@ int dwc3_gadget_init(struct dwc3 *dwc) if (ret) goto err4; - irq = platform_get_irq(to_platform_device(dwc->dev), 0); - - ret = request_irq(irq, dwc3_interrupt, IRQF_SHARED, - "dwc3", dwc); - if (ret) { - dev_err(dwc->dev, "failed to request irq #%d --> %d\n", - irq, ret); - goto err5; - } - reg = dwc3_readl(dwc->regs, DWC3_DCFG); reg |= DWC3_DCFG_LPM_CAP; dwc3_writel(dwc->regs, DWC3_DCFG, reg); - /* Enable all but Start and End of Frame IRQs */ - reg = (DWC3_DEVTEN_VNDRDEVTSTRCVEDEN | - DWC3_DEVTEN_EVNTOVERFLOWEN | - DWC3_DEVTEN_CMDCMPLTEN | - DWC3_DEVTEN_ERRTICERREN | - DWC3_DEVTEN_WKUPEVTEN | - DWC3_DEVTEN_ULSTCNGEN | - DWC3_DEVTEN_CONNECTDONEEN | - DWC3_DEVTEN_USBRSTEN | - DWC3_DEVTEN_DISCONNEVTEN); - dwc3_writel(dwc->regs, DWC3_DEVTEN, reg); - - /* automatic phy suspend only on recent versions */ + /* Enable USB2 LPM and automatic phy suspend only on recent versions */ if (dwc->revision >= DWC3_REVISION_194A) { dwc3_gadget_usb2_phy_suspend(dwc, false); dwc3_gadget_usb3_phy_suspend(dwc, false); } - ret = device_register(&dwc->gadget.dev); - if (ret) { - dev_err(dwc->dev, "failed to register gadget device\n"); - put_device(&dwc->gadget.dev); - goto err6; - } - ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget); if (ret) { dev_err(dwc->dev, "failed to register udc\n"); - goto err7; + goto err5; } return 0; -err7: - device_unregister(&dwc->gadget.dev); - -err6: - dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00); - free_irq(irq, dwc); - err5: dwc3_gadget_free_endpoints(dwc); @@ -2588,15 +2674,11 @@ err0: return ret; } +/* -------------------------------------------------------------------------- */ + void dwc3_gadget_exit(struct dwc3 *dwc) { - int irq; - usb_del_gadget_udc(&dwc->gadget); - irq = platform_get_irq(to_platform_device(dwc->dev), 0); - - dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00); - free_irq(irq, dwc); dwc3_gadget_free_endpoints(dwc); @@ -2610,6 +2692,63 @@ void dwc3_gadget_exit(struct dwc3 *dwc) dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req), dwc->ctrl_req, dwc->ctrl_req_addr); +} - device_unregister(&dwc->gadget.dev); +int dwc3_gadget_prepare(struct dwc3 *dwc) +{ + if (dwc->pullups_connected) + dwc3_gadget_disable_irq(dwc); + + return 0; +} + +void dwc3_gadget_complete(struct dwc3 *dwc) +{ + if (dwc->pullups_connected) { + dwc3_gadget_enable_irq(dwc); + dwc3_gadget_run_stop(dwc, true); + } +} + +int dwc3_gadget_suspend(struct dwc3 *dwc) +{ + __dwc3_gadget_ep_disable(dwc->eps[0]); + __dwc3_gadget_ep_disable(dwc->eps[1]); + + dwc->dcfg = dwc3_readl(dwc->regs, DWC3_DCFG); + + return 0; +} + +int dwc3_gadget_resume(struct dwc3 *dwc) +{ + struct dwc3_ep *dep; + int ret; + + /* Start with SuperSpeed Default */ + dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); + + dep = dwc->eps[0]; + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false); + if (ret) + goto err0; + + dep = dwc->eps[1]; + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false); + if (ret) + goto err1; + + /* begin to receive SETUP packets */ + dwc->ep0state = EP0_SETUP_PHASE; + dwc3_ep0_out_start(dwc); + + dwc3_writel(dwc->regs, DWC3_DCFG, dwc->dcfg); + + return 0; + +err1: + __dwc3_gadget_ep_disable(dwc->eps[0]); + +err0: + return ret; } diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index c7525b1cad74..83300d94a893 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -144,6 +144,7 @@ config USB_AT91 config USB_LPC32XX tristate "LPC32XX USB Peripheral Controller" depends on ARCH_LPC32XX + depends on USB_PHY select USB_ISP1301 select USB_OTG_UTILS help @@ -195,8 +196,8 @@ config USB_FUSB300 config USB_OMAP tristate "OMAP USB Device Controller" depends on ARCH_OMAP1 + depends on USB_PHY select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG - select USB_OTG_UTILS if ARCH_OMAP help Many Texas Instruments OMAP processors have flexible full speed USB device controllers, with support for up to 30 @@ -211,7 +212,6 @@ config USB_OMAP config USB_PXA25X tristate "PXA 25x or IXP 4xx" depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX - select USB_OTG_UTILS help Intel's PXA 25x series XScale ARM-5TE processors include an integrated full speed USB 1.1 device controller. The @@ -259,8 +259,6 @@ config USB_RENESAS_USBHS_UDC config USB_PXA27X tristate "PXA 27x" - depends on ARCH_PXA && (PXA27x || PXA3xx) - select USB_OTG_UTILS help Intel's PXA 27x series XScale ARM v5TE processors include an integrated full speed USB 1.1 device controller. @@ -329,9 +327,6 @@ config USB_MV_UDC config USB_MV_U3D tristate "MARVELL PXA2128 USB 3.0 controller" - depends on CPU_MMP3 - select USB_GADGET_DUALSPEED - select USB_GADGET_SUPERSPEED help MARVELL PXA2128 Processor series include a super speed USB3.0 device controller, which support super speed USB peripheral. @@ -501,6 +496,7 @@ endmenu # composite based drivers config USB_LIBCOMPOSITE tristate + select CONFIGFS_FS depends on USB_GADGET config USB_F_ACM @@ -512,6 +508,12 @@ config USB_F_SS_LB config USB_U_SERIAL tristate +config USB_F_SERIAL + tristate + +config USB_F_OBEX + tristate + choice tristate "USB Gadget Drivers" default USB_ETH @@ -766,6 +768,8 @@ config USB_G_SERIAL depends on TTY select USB_U_SERIAL select USB_F_ACM + select USB_F_SERIAL + select USB_F_OBEX select USB_LIBCOMPOSITE help The Serial Gadget talks to the Linux-USB generic serial driver. @@ -839,6 +843,7 @@ config USB_G_NOKIA depends on PHONET select USB_LIBCOMPOSITE select USB_U_SERIAL + select USB_F_ACM help The Nokia composite gadget provides support for acm, obex and phonet in only one composite gadget driver. @@ -957,6 +962,7 @@ config USB_G_WEBCAM tristate "USB Webcam Gadget" depends on VIDEO_DEV select USB_LIBCOMPOSITE + select VIDEOBUF2_VMALLOC help The Webcam Gadget acts as a composite USB Audio and Video Class device. It provides a userspace API to process UVC control requests diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 82fb22511356..6afd16659e78 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -6,7 +6,7 @@ ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG obj-$(CONFIG_USB_GADGET) += udc-core.o obj-$(CONFIG_USB_LIBCOMPOSITE) += libcomposite.o libcomposite-y := usbstring.o config.o epautoconf.o -libcomposite-y += composite.o functions.o +libcomposite-y += composite.o functions.o configfs.o obj-$(CONFIG_USB_DUMMY_HCD) += dummy_hcd.o obj-$(CONFIG_USB_NET2272) += net2272.o obj-$(CONFIG_USB_NET2280) += net2280.o @@ -36,10 +36,15 @@ obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o obj-$(CONFIG_USB_MV_U3D) += mv_u3d_core.o # USB Functions -obj-$(CONFIG_USB_F_ACM) += f_acm.o -f_ss_lb-y := f_loopback.o f_sourcesink.o -obj-$(CONFIG_USB_F_SS_LB) += f_ss_lb.o +usb_f_acm-y := f_acm.o +obj-$(CONFIG_USB_F_ACM) += usb_f_acm.o +usb_f_ss_lb-y := f_loopback.o f_sourcesink.o +obj-$(CONFIG_USB_F_SS_LB) += usb_f_ss_lb.o obj-$(CONFIG_USB_U_SERIAL) += u_serial.o +usb_f_serial-y := f_serial.o +obj-$(CONFIG_USB_F_SERIAL) += usb_f_serial.o +usb_f_obex-y := f_obex.o +obj-$(CONFIG_USB_F_OBEX) += usb_f_obex.o # # USB gadget drivers diff --git a/drivers/usb/gadget/acm_ms.c b/drivers/usb/gadget/acm_ms.c index 8f2b0e391534..4b947bb50f62 100644 --- a/drivers/usb/gadget/acm_ms.c +++ b/drivers/usb/gadget/acm_ms.c @@ -109,7 +109,6 @@ FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data); static struct fsg_common fsg_common; /*-------------------------------------------------------------------------*/ -static unsigned char tty_line; static struct usb_function *f_acm; static struct usb_function_instance *f_acm_inst; /* @@ -117,7 +116,6 @@ static struct usb_function_instance *f_acm_inst; */ static int __init acm_ms_do_config(struct usb_configuration *c) { - struct f_serial_opts *opts; int status; if (gadget_is_otg(c->cdev->gadget)) { @@ -129,9 +127,6 @@ static int __init acm_ms_do_config(struct usb_configuration *c) if (IS_ERR(f_acm_inst)) return PTR_ERR(f_acm_inst); - opts = container_of(f_acm_inst, struct f_serial_opts, func_inst); - opts->port_num = tty_line; - f_acm = usb_get_function(f_acm_inst); if (IS_ERR(f_acm)) { status = PTR_ERR(f_acm); @@ -171,16 +166,11 @@ static int __init acm_ms_bind(struct usb_composite_dev *cdev) int status; void *retp; - /* set up serial link layer */ - status = gserial_alloc_line(&tty_line); - if (status < 0) - return status; - /* set up mass storage function */ retp = fsg_common_from_params(&fsg_common, cdev, &fsg_mod_data); if (IS_ERR(retp)) { status = PTR_ERR(retp); - goto fail0; + return PTR_ERR(retp); } /* @@ -207,8 +197,6 @@ static int __init acm_ms_bind(struct usb_composite_dev *cdev) /* error recovery */ fail1: fsg_common_put(&fsg_common); -fail0: - gserial_free_line(tty_line); return status; } @@ -216,7 +204,6 @@ static int __exit acm_ms_unbind(struct usb_composite_dev *cdev) { usb_put_function(f_acm); usb_put_function_instance(f_acm_inst); - gserial_free_line(tty_line); return 0; } diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index 75973f33a4c8..f52dcfe8f545 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -1922,7 +1922,6 @@ static int amd5536_udc_start(struct usb_gadget *g, driver->driver.bus = NULL; dev->driver = driver; - dev->gadget.dev.driver = &driver->driver; /* Some gadget drivers use both ep0 directions. * NOTE: to gadget driver, ep0 is just one endpoint... @@ -1973,7 +1972,6 @@ static int amd5536_udc_stop(struct usb_gadget *g, shutdown(dev, driver); spin_unlock_irqrestore(&dev->lock, flags); - dev->gadget.dev.driver = NULL; dev->driver = NULL; /* set SD */ @@ -3080,7 +3078,6 @@ static void udc_pci_remove(struct pci_dev *pdev) if (dev->active) pci_disable_device(pdev); - device_unregister(&dev->gadget.dev); pci_set_drvdata(pdev, NULL); udc_remove(dev); @@ -3245,8 +3242,6 @@ static int udc_pci_probe( dev->phys_addr = resource; dev->irq = pdev->irq; dev->pdev = pdev; - dev->gadget.dev.parent = &pdev->dev; - dev->gadget.dev.dma_mask = pdev->dev.dma_mask; /* general probing */ if (udc_probe(dev) == 0) @@ -3273,7 +3268,6 @@ static int udc_probe(struct udc *dev) dev->gadget.ops = &udc_ops; dev_set_name(&dev->gadget.dev, "gadget"); - dev->gadget.dev.release = gadget_release; dev->gadget.name = name; dev->gadget.max_speed = USB_SPEED_HIGH; @@ -3297,17 +3291,11 @@ static int udc_probe(struct udc *dev) "driver version: %s(for Geode5536 B1)\n", tmp); udc = dev; - retval = usb_add_gadget_udc(&udc->pdev->dev, &dev->gadget); + retval = usb_add_gadget_udc_release(&udc->pdev->dev, &dev->gadget, + gadget_release); if (retval) goto finished; - retval = device_register(&dev->gadget.dev); - if (retval) { - usb_del_gadget_udc(&dev->gadget); - put_device(&dev->gadget.dev); - goto finished; - } - /* timer init */ init_timer(&udc_timer); udc_timer.function = udc_timer_function; diff --git a/drivers/usb/gadget/amd5536udc.h b/drivers/usb/gadget/amd5536udc.h index f1bf32e6b8d8..6744d3b83109 100644 --- a/drivers/usb/gadget/amd5536udc.h +++ b/drivers/usb/gadget/amd5536udc.h @@ -472,7 +472,6 @@ struct udc_request { /* flags */ unsigned dma_going : 1, - dma_mapping : 1, dma_done : 1; /* phys. address */ dma_addr_t td_phys; diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 45dd2929a671..a690d64217f4 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -1631,7 +1631,6 @@ static int at91_start(struct usb_gadget *gadget, udc = container_of(gadget, struct at91_udc, gadget); udc->driver = driver; - udc->gadget.dev.driver = &driver->driver; udc->gadget.dev.of_node = udc->pdev->dev.of_node; udc->enabled = 1; udc->selfpowered = 1; @@ -1652,7 +1651,6 @@ static int at91_stop(struct usb_gadget *gadget, at91_udp_write(udc, AT91_UDP_IDR, ~0); spin_unlock_irqrestore(&udc->lock, flags); - udc->gadget.dev.driver = NULL; udc->driver = NULL; DBG("unbound from %s\n", driver->driver.name); @@ -1780,13 +1778,7 @@ static int at91udc_probe(struct platform_device *pdev) DBG("clocks missing\n"); retval = -ENODEV; /* NOTE: we "know" here that refcounts on these are NOPs */ - goto fail0b; - } - - retval = device_register(&udc->gadget.dev); - if (retval < 0) { - put_device(&udc->gadget.dev); - goto fail0b; + goto fail1; } /* don't do anything until we have both gadget driver and VBUS */ @@ -1857,8 +1849,6 @@ fail3: fail2: free_irq(udc->udp_irq, udc); fail1: - device_unregister(&udc->gadget.dev); -fail0b: iounmap(udc->udp_baseaddr); fail0a: if (cpu_is_at91rm9200()) @@ -1892,8 +1882,6 @@ static int __exit at91udc_remove(struct platform_device *pdev) gpio_free(udc->board.vbus_pin); } free_irq(udc->udp_irq, udc); - device_unregister(&udc->gadget.dev); - iounmap(udc->udp_baseaddr); if (cpu_is_at91rm9200()) diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index b66130c97269..f2a970f75bfa 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -489,13 +489,8 @@ request_complete(struct usba_ep *ep, struct usba_request *req, int status) if (req->req.status == -EINPROGRESS) req->req.status = status; - if (req->mapped) { - dma_unmap_single( - &udc->pdev->dev, req->req.dma, req->req.length, - ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - req->req.dma = DMA_ADDR_INVALID; - req->mapped = 0; - } + if (req->using_dma) + usb_gadget_unmap_request(&udc->gadget, &req->req, ep->is_in); DBG(DBG_GADGET | DBG_REQ, "%s: req %p complete: status %d, actual %u\n", @@ -684,7 +679,6 @@ usba_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) return NULL; INIT_LIST_HEAD(&req->queue); - req->req.dma = DMA_ADDR_INVALID; return &req->req; } @@ -717,20 +711,11 @@ static int queue_dma(struct usba_udc *udc, struct usba_ep *ep, return -EINVAL; } - req->using_dma = 1; - - if (req->req.dma == DMA_ADDR_INVALID) { - req->req.dma = dma_map_single( - &udc->pdev->dev, req->req.buf, req->req.length, - ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - req->mapped = 1; - } else { - dma_sync_single_for_device( - &udc->pdev->dev, req->req.dma, req->req.length, - ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - req->mapped = 0; - } + ret = usb_gadget_map_request(&udc->gadget, &req->req, ep->is_in); + if (ret) + return ret; + req->using_dma = 1; req->ctrl = USBA_BF(DMA_BUF_LEN, req->req.length) | USBA_DMA_CH_EN | USBA_DMA_END_BUF_IE | USBA_DMA_END_TR_EN | USBA_DMA_END_TR_IE; @@ -1799,7 +1784,6 @@ static int atmel_usba_start(struct usb_gadget *gadget, udc->devstatus = 1 << USB_DEVICE_SELF_POWERED; udc->driver = driver; - udc->gadget.dev.driver = &driver->driver; spin_unlock_irqrestore(&udc->lock, flags); clk_enable(udc->pclk); @@ -1841,7 +1825,6 @@ static int atmel_usba_stop(struct usb_gadget *gadget, toggle_bias(0); usba_writel(udc, CTRL, USBA_DISABLE_MASK); - udc->gadget.dev.driver = NULL; udc->driver = NULL; clk_disable(udc->hclk); @@ -1900,10 +1883,6 @@ static int __init usba_udc_probe(struct platform_device *pdev) dev_info(&pdev->dev, "FIFO at 0x%08lx mapped at %p\n", (unsigned long)fifo->start, udc->fifo); - device_initialize(&udc->gadget.dev); - udc->gadget.dev.parent = &pdev->dev; - udc->gadget.dev.dma_mask = pdev->dev.dma_mask; - platform_set_drvdata(pdev, udc); /* Make sure we start from a clean slate */ @@ -1962,12 +1941,6 @@ static int __init usba_udc_probe(struct platform_device *pdev) } udc->irq = irq; - ret = device_add(&udc->gadget.dev); - if (ret) { - dev_dbg(&pdev->dev, "Could not add gadget: %d\n", ret); - goto err_device_add; - } - if (gpio_is_valid(pdata->vbus_pin)) { if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) { udc->vbus_pin = pdata->vbus_pin; @@ -2007,9 +1980,6 @@ err_add_udc: gpio_free(udc->vbus_pin); } - device_unregister(&udc->gadget.dev); - -err_device_add: free_irq(irq, udc); err_request_irq: kfree(usba_ep); @@ -2053,8 +2023,6 @@ static int __exit usba_udc_remove(struct platform_device *pdev) clk_put(udc->hclk); clk_put(udc->pclk); - device_unregister(&udc->gadget.dev); - return 0; } diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h index 9791259cbda7..d65a61851d3d 100644 --- a/drivers/usb/gadget/atmel_usba_udc.h +++ b/drivers/usb/gadget/atmel_usba_udc.h @@ -216,12 +216,6 @@ #define EP0_EPT_SIZE USBA_EPT_SIZE_64 #define EP0_NR_BANKS 1 -/* - * REVISIT: Try to eliminate this value. Can we rely on req->mapped to - * provide this information? - */ -#define DMA_ADDR_INVALID (~(dma_addr_t)0) - #define FIFO_IOMEM_ID 0 #define CTRL_IOMEM_ID 1 diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c index 8cc8253f1100..6e6518264c42 100644 --- a/drivers/usb/gadget/bcm63xx_udc.c +++ b/drivers/usb/gadget/bcm63xx_udc.c @@ -1819,7 +1819,6 @@ static int bcm63xx_udc_start(struct usb_gadget *gadget, udc->driver = driver; driver->driver.bus = NULL; - udc->gadget.dev.driver = &driver->driver; udc->gadget.dev.of_node = udc->dev->of_node; spin_unlock_irqrestore(&udc->lock, flags); @@ -1841,7 +1840,6 @@ static int bcm63xx_udc_stop(struct usb_gadget *gadget, spin_lock_irqsave(&udc->lock, flags); udc->driver = NULL; - udc->gadget.dev.driver = NULL; /* * If we switch the PHY too abruptly after dropping D+, the host @@ -2306,17 +2304,6 @@ static void bcm63xx_udc_cleanup_debugfs(struct bcm63xx_udc *udc) ***********************************************************************/ /** - * bcm63xx_udc_gadget_release - Called from device_release(). - * @dev: Unused. - * - * We get a warning if this function doesn't exist, but it's empty because - * we don't have to free any of the memory allocated with the devm_* APIs. - */ -static void bcm63xx_udc_gadget_release(struct device *dev) -{ -} - -/** * bcm63xx_udc_probe - Initialize a new instance of the UDC. * @pdev: Platform device struct from the bcm63xx BSP code. * @@ -2368,13 +2355,9 @@ static int bcm63xx_udc_probe(struct platform_device *pdev) spin_lock_init(&udc->lock); INIT_WORK(&udc->ep0_wq, bcm63xx_ep0_process); - dev_set_name(&udc->gadget.dev, "gadget"); udc->gadget.ops = &bcm63xx_udc_ops; udc->gadget.name = dev_name(dev); - udc->gadget.dev.parent = dev; - udc->gadget.dev.release = bcm63xx_udc_gadget_release; - udc->gadget.dev.dma_mask = dev->dma_mask; if (!pd->use_fullspeed && !use_fullspeed) udc->gadget.max_speed = USB_SPEED_HIGH; @@ -2414,17 +2397,12 @@ static int bcm63xx_udc_probe(struct platform_device *pdev) } } - rc = device_register(&udc->gadget.dev); - if (rc) - goto out_uninit; - bcm63xx_udc_init_debugfs(udc); rc = usb_add_gadget_udc(dev, &udc->gadget); if (!rc) return 0; bcm63xx_udc_cleanup_debugfs(udc); - device_unregister(&udc->gadget.dev); out_uninit: bcm63xx_uninit_udc_hw(udc); return rc; @@ -2440,7 +2418,6 @@ static int bcm63xx_udc_remove(struct platform_device *pdev) bcm63xx_udc_cleanup_debugfs(udc); usb_del_gadget_udc(&udc->gadget); - device_unregister(&udc->gadget.dev); BUG_ON(udc->driver); platform_set_drvdata(pdev, NULL); diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c index a7d6f7026757..2c5255182769 100644 --- a/drivers/usb/gadget/cdc2.c +++ b/drivers/usb/gadget/cdc2.c @@ -103,18 +103,16 @@ static struct usb_gadget_strings *dev_strings[] = { }; static u8 hostaddr[ETH_ALEN]; - +static struct eth_dev *the_dev; /*-------------------------------------------------------------------------*/ static struct usb_function *f_acm; static struct usb_function_instance *fi_serial; -static unsigned char tty_line; /* * We _always_ have both CDC ECM and CDC ACM functions. */ static int __init cdc_do_config(struct usb_configuration *c) { - struct f_serial_opts *opts; int status; if (gadget_is_otg(c->cdev->gadget)) { @@ -122,7 +120,7 @@ static int __init cdc_do_config(struct usb_configuration *c) c->bmAttributes |= USB_CONFIG_ATT_WAKEUP; } - status = ecm_bind_config(c, hostaddr); + status = ecm_bind_config(c, hostaddr, the_dev); if (status < 0) return status; @@ -130,12 +128,11 @@ static int __init cdc_do_config(struct usb_configuration *c) if (IS_ERR(fi_serial)) return PTR_ERR(fi_serial); - opts = container_of(fi_serial, struct f_serial_opts, func_inst); - opts->port_num = tty_line; - f_acm = usb_get_function(fi_serial); - if (IS_ERR(f_acm)) + if (IS_ERR(f_acm)) { + status = PTR_ERR(f_acm); goto err_func_acm; + } status = usb_add_function(c, f_acm); if (status) @@ -169,14 +166,9 @@ static int __init cdc_bind(struct usb_composite_dev *cdev) } /* set up network link layer */ - status = gether_setup(cdev->gadget, hostaddr); - if (status < 0) - return status; - - /* set up serial link layer */ - status = gserial_alloc_line(&tty_line); - if (status < 0) - goto fail0; + the_dev = gether_setup(cdev->gadget, hostaddr); + if (IS_ERR(the_dev)) + return PTR_ERR(the_dev); /* Allocate string descriptor numbers ... note that string * contents can be overridden by the composite_dev glue. @@ -200,9 +192,7 @@ static int __init cdc_bind(struct usb_composite_dev *cdev) return 0; fail1: - gserial_free_line(tty_line); -fail0: - gether_cleanup(); + gether_cleanup(the_dev); return status; } @@ -210,8 +200,7 @@ static int __exit cdc_unbind(struct usb_composite_dev *cdev) { usb_put_function(f_acm); usb_put_function_instance(fi_serial); - gserial_free_line(tty_line); - gether_cleanup(); + gether_cleanup(the_dev); return 0; } diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index c0d62b278610..55f4df60f327 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1637,6 +1637,7 @@ void composite_dev_cleanup(struct usb_composite_dev *cdev) kfree(cdev->req->buf); usb_ep_free_request(cdev->gadget->ep0, cdev->req); } + cdev->next_string_id = 0; device_remove_file(&cdev->gadget->dev, &dev_attr_suspended); } diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c new file mode 100644 index 000000000000..3d5cfc9c2c78 --- /dev/null +++ b/drivers/usb/gadget/configfs.c @@ -0,0 +1,1003 @@ +#include <linux/configfs.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/usb/composite.h> +#include <linux/usb/gadget_configfs.h> + +int check_user_usb_string(const char *name, + struct usb_gadget_strings *stringtab_dev) +{ + unsigned primary_lang; + unsigned sub_lang; + u16 num; + int ret; + + ret = kstrtou16(name, 0, &num); + if (ret) + return ret; + + primary_lang = num & 0x3ff; + sub_lang = num >> 10; + + /* simple sanity check for valid langid */ + switch (primary_lang) { + case 0: + case 0x62 ... 0xfe: + case 0x100 ... 0x3ff: + return -EINVAL; + } + if (!sub_lang) + return -EINVAL; + + stringtab_dev->language = num; + return 0; +} + +#define MAX_NAME_LEN 40 +#define MAX_USB_STRING_LANGS 2 + +struct gadget_info { + struct config_group group; + struct config_group functions_group; + struct config_group configs_group; + struct config_group strings_group; + struct config_group *default_groups[4]; + + struct mutex lock; + struct usb_gadget_strings *gstrings[MAX_USB_STRING_LANGS + 1]; + struct list_head string_list; + struct list_head available_func; + + const char *udc_name; +#ifdef CONFIG_USB_OTG + struct usb_otg_descriptor otg; +#endif + struct usb_composite_driver composite; + struct usb_composite_dev cdev; +}; + +struct config_usb_cfg { + struct config_group group; + struct config_group strings_group; + struct config_group *default_groups[2]; + struct list_head string_list; + struct usb_configuration c; + struct list_head func_list; + struct usb_gadget_strings *gstrings[MAX_USB_STRING_LANGS + 1]; +}; + +struct gadget_strings { + struct usb_gadget_strings stringtab_dev; + struct usb_string strings[USB_GADGET_FIRST_AVAIL_IDX]; + char *manufacturer; + char *product; + char *serialnumber; + + struct config_group group; + struct list_head list; +}; + +struct gadget_config_name { + struct usb_gadget_strings stringtab_dev; + struct usb_string strings; + char *configuration; + + struct config_group group; + struct list_head list; +}; + +static int usb_string_copy(const char *s, char **s_copy) +{ + int ret; + char *str; + char *copy = *s_copy; + ret = strlen(s); + if (ret > 126) + return -EOVERFLOW; + + str = kstrdup(s, GFP_KERNEL); + if (!str) + return -ENOMEM; + if (str[ret - 1] == '\n') + str[ret - 1] = '\0'; + kfree(copy); + *s_copy = str; + return 0; +} + +CONFIGFS_ATTR_STRUCT(gadget_info); +CONFIGFS_ATTR_STRUCT(config_usb_cfg); + +#define GI_DEVICE_DESC_ITEM_ATTR(name) \ + static struct gadget_info_attribute gadget_cdev_desc_##name = \ + __CONFIGFS_ATTR(name, S_IRUGO | S_IWUSR, \ + gadget_dev_desc_##name##_show, \ + gadget_dev_desc_##name##_store) + +#define GI_DEVICE_DESC_SIMPLE_R_u8(__name) \ + static ssize_t gadget_dev_desc_##__name##_show(struct gadget_info *gi, \ + char *page) \ +{ \ + return sprintf(page, "0x%02x\n", gi->cdev.desc.__name); \ +} + +#define GI_DEVICE_DESC_SIMPLE_R_u16(__name) \ + static ssize_t gadget_dev_desc_##__name##_show(struct gadget_info *gi, \ + char *page) \ +{ \ + return sprintf(page, "0x%04x\n", le16_to_cpup(&gi->cdev.desc.__name)); \ +} + + +#define GI_DEVICE_DESC_SIMPLE_W_u8(_name) \ + static ssize_t gadget_dev_desc_##_name##_store(struct gadget_info *gi, \ + const char *page, size_t len) \ +{ \ + u8 val; \ + int ret; \ + ret = kstrtou8(page, 0, &val); \ + if (ret) \ + return ret; \ + gi->cdev.desc._name = val; \ + return len; \ +} + +#define GI_DEVICE_DESC_SIMPLE_W_u16(_name) \ + static ssize_t gadget_dev_desc_##_name##_store(struct gadget_info *gi, \ + const char *page, size_t len) \ +{ \ + u16 val; \ + int ret; \ + ret = kstrtou16(page, 0, &val); \ + if (ret) \ + return ret; \ + gi->cdev.desc._name = cpu_to_le16p(&val); \ + return len; \ +} + +#define GI_DEVICE_DESC_SIMPLE_RW(_name, _type) \ + GI_DEVICE_DESC_SIMPLE_R_##_type(_name) \ + GI_DEVICE_DESC_SIMPLE_W_##_type(_name) + +GI_DEVICE_DESC_SIMPLE_R_u16(bcdUSB); +GI_DEVICE_DESC_SIMPLE_RW(bDeviceClass, u8); +GI_DEVICE_DESC_SIMPLE_RW(bDeviceSubClass, u8); +GI_DEVICE_DESC_SIMPLE_RW(bDeviceProtocol, u8); +GI_DEVICE_DESC_SIMPLE_RW(bMaxPacketSize0, u8); +GI_DEVICE_DESC_SIMPLE_RW(idVendor, u16); +GI_DEVICE_DESC_SIMPLE_RW(idProduct, u16); +GI_DEVICE_DESC_SIMPLE_R_u16(bcdDevice); + +static ssize_t is_valid_bcd(u16 bcd_val) +{ + if ((bcd_val & 0xf) > 9) + return -EINVAL; + if (((bcd_val >> 4) & 0xf) > 9) + return -EINVAL; + if (((bcd_val >> 8) & 0xf) > 9) + return -EINVAL; + if (((bcd_val >> 12) & 0xf) > 9) + return -EINVAL; + return 0; +} + +static ssize_t gadget_dev_desc_bcdDevice_store(struct gadget_info *gi, + const char *page, size_t len) +{ + u16 bcdDevice; + int ret; + + ret = kstrtou16(page, 0, &bcdDevice); + if (ret) + return ret; + ret = is_valid_bcd(bcdDevice); + if (ret) + return ret; + + gi->cdev.desc.bcdDevice = cpu_to_le16(bcdDevice); + return len; +} + +static ssize_t gadget_dev_desc_bcdUSB_store(struct gadget_info *gi, + const char *page, size_t len) +{ + u16 bcdUSB; + int ret; + + ret = kstrtou16(page, 0, &bcdUSB); + if (ret) + return ret; + ret = is_valid_bcd(bcdUSB); + if (ret) + return ret; + + gi->cdev.desc.bcdUSB = cpu_to_le16(bcdUSB); + return len; +} + +static ssize_t gadget_dev_desc_UDC_show(struct gadget_info *gi, char *page) +{ + return sprintf(page, "%s\n", gi->udc_name ?: ""); +} + +static int unregister_gadget(struct gadget_info *gi) +{ + int ret; + + if (!gi->udc_name) + return -ENODEV; + + ret = usb_gadget_unregister_driver(&gi->composite.gadget_driver); + if (ret) + return ret; + kfree(gi->udc_name); + gi->udc_name = NULL; + return 0; +} + +static ssize_t gadget_dev_desc_UDC_store(struct gadget_info *gi, + const char *page, size_t len) +{ + char *name; + int ret; + + name = kstrdup(page, GFP_KERNEL); + if (!name) + return -ENOMEM; + if (name[len - 1] == '\n') + name[len - 1] = '\0'; + + mutex_lock(&gi->lock); + + if (!strlen(name)) { + ret = unregister_gadget(gi); + if (ret) + goto err; + } else { + if (gi->udc_name) { + ret = -EBUSY; + goto err; + } + ret = udc_attach_driver(name, &gi->composite.gadget_driver); + if (ret) + goto err; + gi->udc_name = name; + } + mutex_unlock(&gi->lock); + return len; +err: + kfree(name); + mutex_unlock(&gi->lock); + return ret; +} + +GI_DEVICE_DESC_ITEM_ATTR(bDeviceClass); +GI_DEVICE_DESC_ITEM_ATTR(bDeviceSubClass); +GI_DEVICE_DESC_ITEM_ATTR(bDeviceProtocol); +GI_DEVICE_DESC_ITEM_ATTR(bMaxPacketSize0); +GI_DEVICE_DESC_ITEM_ATTR(idVendor); +GI_DEVICE_DESC_ITEM_ATTR(idProduct); +GI_DEVICE_DESC_ITEM_ATTR(bcdDevice); +GI_DEVICE_DESC_ITEM_ATTR(bcdUSB); +GI_DEVICE_DESC_ITEM_ATTR(UDC); + +static struct configfs_attribute *gadget_root_attrs[] = { + &gadget_cdev_desc_bDeviceClass.attr, + &gadget_cdev_desc_bDeviceSubClass.attr, + &gadget_cdev_desc_bDeviceProtocol.attr, + &gadget_cdev_desc_bMaxPacketSize0.attr, + &gadget_cdev_desc_idVendor.attr, + &gadget_cdev_desc_idProduct.attr, + &gadget_cdev_desc_bcdDevice.attr, + &gadget_cdev_desc_bcdUSB.attr, + &gadget_cdev_desc_UDC.attr, + NULL, +}; + +static inline struct gadget_info *to_gadget_info(struct config_item *item) +{ + return container_of(to_config_group(item), struct gadget_info, group); +} + +static inline struct gadget_strings *to_gadget_strings(struct config_item *item) +{ + return container_of(to_config_group(item), struct gadget_strings, + group); +} + +static inline struct gadget_config_name *to_gadget_config_name( + struct config_item *item) +{ + return container_of(to_config_group(item), struct gadget_config_name, + group); +} + +static inline struct config_usb_cfg *to_config_usb_cfg(struct config_item *item) +{ + return container_of(to_config_group(item), struct config_usb_cfg, + group); +} + +static inline struct usb_function_instance *to_usb_function_instance( + struct config_item *item) +{ + return container_of(to_config_group(item), + struct usb_function_instance, group); +} + +static void gadget_info_attr_release(struct config_item *item) +{ + struct gadget_info *gi = to_gadget_info(item); + + WARN_ON(!list_empty(&gi->cdev.configs)); + WARN_ON(!list_empty(&gi->string_list)); + WARN_ON(!list_empty(&gi->available_func)); + kfree(gi->composite.gadget_driver.function); + kfree(gi); +} + +CONFIGFS_ATTR_OPS(gadget_info); + +static struct configfs_item_operations gadget_root_item_ops = { + .release = gadget_info_attr_release, + .show_attribute = gadget_info_attr_show, + .store_attribute = gadget_info_attr_store, +}; + +static void gadget_config_attr_release(struct config_item *item) +{ + struct config_usb_cfg *cfg = to_config_usb_cfg(item); + + WARN_ON(!list_empty(&cfg->c.functions)); + list_del(&cfg->c.list); + kfree(cfg->c.label); + kfree(cfg); +} + +static int config_usb_cfg_link( + struct config_item *usb_cfg_ci, + struct config_item *usb_func_ci) +{ + struct config_usb_cfg *cfg = to_config_usb_cfg(usb_cfg_ci); + struct usb_composite_dev *cdev = cfg->c.cdev; + struct gadget_info *gi = container_of(cdev, struct gadget_info, cdev); + + struct config_group *group = to_config_group(usb_func_ci); + struct usb_function_instance *fi = container_of(group, + struct usb_function_instance, group); + struct usb_function_instance *a_fi; + struct usb_function *f; + int ret; + + mutex_lock(&gi->lock); + /* + * Make sure this function is from within our _this_ gadget and not + * from another gadget or a random directory. + * Also a function instance can only be linked once. + */ + list_for_each_entry(a_fi, &gi->available_func, cfs_list) { + if (a_fi == fi) + break; + } + if (a_fi != fi) { + ret = -EINVAL; + goto out; + } + + list_for_each_entry(f, &cfg->func_list, list) { + if (f->fi == fi) { + ret = -EEXIST; + goto out; + } + } + + f = usb_get_function(fi); + if (IS_ERR(f)) { + ret = PTR_ERR(f); + goto out; + } + + /* stash the function until we bind it to the gadget */ + list_add_tail(&f->list, &cfg->func_list); + ret = 0; +out: + mutex_unlock(&gi->lock); + return ret; +} + +static int config_usb_cfg_unlink( + struct config_item *usb_cfg_ci, + struct config_item *usb_func_ci) +{ + struct config_usb_cfg *cfg = to_config_usb_cfg(usb_cfg_ci); + struct usb_composite_dev *cdev = cfg->c.cdev; + struct gadget_info *gi = container_of(cdev, struct gadget_info, cdev); + + struct config_group *group = to_config_group(usb_func_ci); + struct usb_function_instance *fi = container_of(group, + struct usb_function_instance, group); + struct usb_function *f; + + /* + * ideally I would like to forbid to unlink functions while a gadget is + * bound to an UDC. Since this isn't possible at the moment, we simply + * force an unbind, the function is available here and then we can + * remove the function. + */ + mutex_lock(&gi->lock); + if (gi->udc_name) + unregister_gadget(gi); + WARN_ON(gi->udc_name); + + list_for_each_entry(f, &cfg->func_list, list) { + if (f->fi == fi) { + list_del(&f->list); + usb_put_function(f); + mutex_unlock(&gi->lock); + return 0; + } + } + mutex_unlock(&gi->lock); + WARN(1, "Unable to locate function to unbind\n"); + return 0; +} + +CONFIGFS_ATTR_OPS(config_usb_cfg); + +static struct configfs_item_operations gadget_config_item_ops = { + .release = gadget_config_attr_release, + .show_attribute = config_usb_cfg_attr_show, + .store_attribute = config_usb_cfg_attr_store, + .allow_link = config_usb_cfg_link, + .drop_link = config_usb_cfg_unlink, +}; + + +static ssize_t gadget_config_desc_MaxPower_show(struct config_usb_cfg *cfg, + char *page) +{ + return sprintf(page, "%u\n", cfg->c.MaxPower); +} + +static ssize_t gadget_config_desc_MaxPower_store(struct config_usb_cfg *cfg, + const char *page, size_t len) +{ + u16 val; + int ret; + ret = kstrtou16(page, 0, &val); + if (ret) + return ret; + if (DIV_ROUND_UP(val, 8) > 0xff) + return -ERANGE; + cfg->c.MaxPower = val; + return len; +} + +static ssize_t gadget_config_desc_bmAttributes_show(struct config_usb_cfg *cfg, + char *page) +{ + return sprintf(page, "0x%02x\n", cfg->c.bmAttributes); +} + +static ssize_t gadget_config_desc_bmAttributes_store(struct config_usb_cfg *cfg, + const char *page, size_t len) +{ + u8 val; + int ret; + ret = kstrtou8(page, 0, &val); + if (ret) + return ret; + if (!(val & USB_CONFIG_ATT_ONE)) + return -EINVAL; + if (val & ~(USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER | + USB_CONFIG_ATT_WAKEUP)) + return -EINVAL; + cfg->c.bmAttributes = val; + return len; +} + +#define CFG_CONFIG_DESC_ITEM_ATTR(name) \ + static struct config_usb_cfg_attribute gadget_usb_cfg_##name = \ + __CONFIGFS_ATTR(name, S_IRUGO | S_IWUSR, \ + gadget_config_desc_##name##_show, \ + gadget_config_desc_##name##_store) + +CFG_CONFIG_DESC_ITEM_ATTR(MaxPower); +CFG_CONFIG_DESC_ITEM_ATTR(bmAttributes); + +static struct configfs_attribute *gadget_config_attrs[] = { + &gadget_usb_cfg_MaxPower.attr, + &gadget_usb_cfg_bmAttributes.attr, + NULL, +}; + +static struct config_item_type gadget_config_type = { + .ct_item_ops = &gadget_config_item_ops, + .ct_attrs = gadget_config_attrs, + .ct_owner = THIS_MODULE, +}; + +static struct config_item_type gadget_root_type = { + .ct_item_ops = &gadget_root_item_ops, + .ct_attrs = gadget_root_attrs, + .ct_owner = THIS_MODULE, +}; + +static void composite_init_dev(struct usb_composite_dev *cdev) +{ + spin_lock_init(&cdev->lock); + INIT_LIST_HEAD(&cdev->configs); + INIT_LIST_HEAD(&cdev->gstrings); +} + +static struct config_group *function_make( + struct config_group *group, + const char *name) +{ + struct gadget_info *gi; + struct usb_function_instance *fi; + char buf[MAX_NAME_LEN]; + char *func_name; + char *instance_name; + int ret; + + ret = snprintf(buf, MAX_NAME_LEN, "%s", name); + if (ret >= MAX_NAME_LEN) + return ERR_PTR(-ENAMETOOLONG); + + func_name = buf; + instance_name = strchr(func_name, '.'); + if (!instance_name) { + pr_err("Unable to locate . in FUNC.INSTANCE\n"); + return ERR_PTR(-EINVAL); + } + *instance_name = '\0'; + instance_name++; + + fi = usb_get_function_instance(func_name); + if (IS_ERR(fi)) + return ERR_PTR(PTR_ERR(fi)); + + ret = config_item_set_name(&fi->group.cg_item, name); + if (ret) { + usb_put_function_instance(fi); + return ERR_PTR(ret); + } + + gi = container_of(group, struct gadget_info, functions_group); + + mutex_lock(&gi->lock); + list_add_tail(&fi->cfs_list, &gi->available_func); + mutex_unlock(&gi->lock); + return &fi->group; +} + +static void function_drop( + struct config_group *group, + struct config_item *item) +{ + struct usb_function_instance *fi = to_usb_function_instance(item); + struct gadget_info *gi; + + gi = container_of(group, struct gadget_info, functions_group); + + mutex_lock(&gi->lock); + list_del(&fi->cfs_list); + mutex_unlock(&gi->lock); + config_item_put(item); +} + +static struct configfs_group_operations functions_ops = { + .make_group = &function_make, + .drop_item = &function_drop, +}; + +static struct config_item_type functions_type = { + .ct_group_ops = &functions_ops, + .ct_owner = THIS_MODULE, +}; + +CONFIGFS_ATTR_STRUCT(gadget_config_name); +GS_STRINGS_RW(gadget_config_name, configuration); + +static struct configfs_attribute *gadget_config_name_langid_attrs[] = { + &gadget_config_name_configuration.attr, + NULL, +}; + +static void gadget_config_name_attr_release(struct config_item *item) +{ + struct gadget_config_name *cn = to_gadget_config_name(item); + + kfree(cn->configuration); + + list_del(&cn->list); + kfree(cn); +} + +USB_CONFIG_STRING_RW_OPS(gadget_config_name); +USB_CONFIG_STRINGS_LANG(gadget_config_name, config_usb_cfg); + +static struct config_group *config_desc_make( + struct config_group *group, + const char *name) +{ + struct gadget_info *gi; + struct config_usb_cfg *cfg; + char buf[MAX_NAME_LEN]; + char *num_str; + u8 num; + int ret; + + gi = container_of(group, struct gadget_info, configs_group); + ret = snprintf(buf, MAX_NAME_LEN, "%s", name); + if (ret >= MAX_NAME_LEN) + return ERR_PTR(-ENAMETOOLONG); + + num_str = strchr(buf, '.'); + if (!num_str) { + pr_err("Unable to locate . in name.bConfigurationValue\n"); + return ERR_PTR(-EINVAL); + } + + *num_str = '\0'; + num_str++; + + if (!strlen(buf)) + return ERR_PTR(-EINVAL); + + ret = kstrtou8(num_str, 0, &num); + if (ret) + return ERR_PTR(ret); + + cfg = kzalloc(sizeof(*cfg), GFP_KERNEL); + if (!cfg) + return ERR_PTR(-ENOMEM); + cfg->c.label = kstrdup(buf, GFP_KERNEL); + if (!cfg->c.label) { + ret = -ENOMEM; + goto err; + } + cfg->c.bConfigurationValue = num; + cfg->c.MaxPower = CONFIG_USB_GADGET_VBUS_DRAW; + cfg->c.bmAttributes = USB_CONFIG_ATT_ONE; + INIT_LIST_HEAD(&cfg->string_list); + INIT_LIST_HEAD(&cfg->func_list); + + cfg->group.default_groups = cfg->default_groups; + cfg->default_groups[0] = &cfg->strings_group; + + config_group_init_type_name(&cfg->group, name, + &gadget_config_type); + config_group_init_type_name(&cfg->strings_group, "strings", + &gadget_config_name_strings_type); + + ret = usb_add_config_only(&gi->cdev, &cfg->c); + if (ret) + goto err; + + return &cfg->group; +err: + kfree(cfg->c.label); + kfree(cfg); + return ERR_PTR(ret); +} + +static void config_desc_drop( + struct config_group *group, + struct config_item *item) +{ + config_item_put(item); +} + +static struct configfs_group_operations config_desc_ops = { + .make_group = &config_desc_make, + .drop_item = &config_desc_drop, +}; + +static struct config_item_type config_desc_type = { + .ct_group_ops = &config_desc_ops, + .ct_owner = THIS_MODULE, +}; + +CONFIGFS_ATTR_STRUCT(gadget_strings); +GS_STRINGS_RW(gadget_strings, manufacturer); +GS_STRINGS_RW(gadget_strings, product); +GS_STRINGS_RW(gadget_strings, serialnumber); + +static struct configfs_attribute *gadget_strings_langid_attrs[] = { + &gadget_strings_manufacturer.attr, + &gadget_strings_product.attr, + &gadget_strings_serialnumber.attr, + NULL, +}; + +static void gadget_strings_attr_release(struct config_item *item) +{ + struct gadget_strings *gs = to_gadget_strings(item); + + kfree(gs->manufacturer); + kfree(gs->product); + kfree(gs->serialnumber); + + list_del(&gs->list); + kfree(gs); +} + +USB_CONFIG_STRING_RW_OPS(gadget_strings); +USB_CONFIG_STRINGS_LANG(gadget_strings, gadget_info); + +static int configfs_do_nothing(struct usb_composite_dev *cdev) +{ + WARN_ON(1); + return -EINVAL; +} + +int composite_dev_prepare(struct usb_composite_driver *composite, + struct usb_composite_dev *dev); + +static void purge_configs_funcs(struct gadget_info *gi) +{ + struct usb_configuration *c; + + list_for_each_entry(c, &gi->cdev.configs, list) { + struct usb_function *f, *tmp; + struct config_usb_cfg *cfg; + + cfg = container_of(c, struct config_usb_cfg, c); + + list_for_each_entry_safe(f, tmp, &c->functions, list) { + + list_move_tail(&f->list, &cfg->func_list); + if (f->unbind) { + dev_err(&gi->cdev.gadget->dev, "unbind function" + " '%s'/%p\n", f->name, f); + f->unbind(c, f); + } + } + c->next_interface_id = 0; + c->superspeed = 0; + c->highspeed = 0; + c->fullspeed = 0; + } +} + +static int configfs_composite_bind(struct usb_gadget *gadget, + struct usb_gadget_driver *gdriver) +{ + struct usb_composite_driver *composite = to_cdriver(gdriver); + struct gadget_info *gi = container_of(composite, + struct gadget_info, composite); + struct usb_composite_dev *cdev = &gi->cdev; + struct usb_configuration *c; + struct usb_string *s; + unsigned i; + int ret; + + /* the gi->lock is hold by the caller */ + cdev->gadget = gadget; + set_gadget_data(gadget, cdev); + ret = composite_dev_prepare(composite, cdev); + if (ret) + return ret; + /* and now the gadget bind */ + ret = -EINVAL; + + if (list_empty(&gi->cdev.configs)) { + pr_err("Need atleast one configuration in %s.\n", + gi->composite.name); + goto err_comp_cleanup; + } + + + list_for_each_entry(c, &gi->cdev.configs, list) { + struct config_usb_cfg *cfg; + + cfg = container_of(c, struct config_usb_cfg, c); + if (list_empty(&cfg->func_list)) { + pr_err("Config %s/%d of %s needs atleast one function.\n", + c->label, c->bConfigurationValue, + gi->composite.name); + goto err_comp_cleanup; + } + } + + /* init all strings */ + if (!list_empty(&gi->string_list)) { + struct gadget_strings *gs; + + i = 0; + list_for_each_entry(gs, &gi->string_list, list) { + + gi->gstrings[i] = &gs->stringtab_dev; + gs->stringtab_dev.strings = gs->strings; + gs->strings[USB_GADGET_MANUFACTURER_IDX].s = + gs->manufacturer; + gs->strings[USB_GADGET_PRODUCT_IDX].s = gs->product; + gs->strings[USB_GADGET_SERIAL_IDX].s = gs->serialnumber; + i++; + } + gi->gstrings[i] = NULL; + s = usb_gstrings_attach(&gi->cdev, gi->gstrings, + USB_GADGET_FIRST_AVAIL_IDX); + if (IS_ERR(s)) + goto err_comp_cleanup; + + gi->cdev.desc.iManufacturer = s[USB_GADGET_MANUFACTURER_IDX].id; + gi->cdev.desc.iProduct = s[USB_GADGET_PRODUCT_IDX].id; + gi->cdev.desc.iSerialNumber = s[USB_GADGET_SERIAL_IDX].id; + } + + /* Go through all configs, attach all functions */ + list_for_each_entry(c, &gi->cdev.configs, list) { + struct config_usb_cfg *cfg; + struct usb_function *f; + struct usb_function *tmp; + struct gadget_config_name *cn; + + cfg = container_of(c, struct config_usb_cfg, c); + if (!list_empty(&cfg->string_list)) { + i = 0; + list_for_each_entry(cn, &cfg->string_list, list) { + cfg->gstrings[i] = &cn->stringtab_dev; + cn->stringtab_dev.strings = &cn->strings; + cn->strings.s = cn->configuration; + i++; + } + cfg->gstrings[i] = NULL; + s = usb_gstrings_attach(&gi->cdev, cfg->gstrings, 1); + if (IS_ERR(s)) + goto err_comp_cleanup; + c->iConfiguration = s[0].id; + } + + list_for_each_entry_safe(f, tmp, &cfg->func_list, list) { + list_del(&f->list); + ret = usb_add_function(c, f); + if (ret) + goto err_purge_funcs; + } + usb_ep_autoconfig_reset(cdev->gadget); + } + usb_ep_autoconfig_reset(cdev->gadget); + return 0; + +err_purge_funcs: + purge_configs_funcs(gi); +err_comp_cleanup: + composite_dev_cleanup(cdev); + return ret; +} + +static void configfs_composite_unbind(struct usb_gadget *gadget) +{ + struct usb_composite_dev *cdev; + struct gadget_info *gi; + + /* the gi->lock is hold by the caller */ + + cdev = get_gadget_data(gadget); + gi = container_of(cdev, struct gadget_info, cdev); + + purge_configs_funcs(gi); + composite_dev_cleanup(cdev); + usb_ep_autoconfig_reset(cdev->gadget); + cdev->gadget = NULL; + set_gadget_data(gadget, NULL); +} + +static const struct usb_gadget_driver configfs_driver_template = { + .bind = configfs_composite_bind, + .unbind = configfs_composite_unbind, + + .setup = composite_setup, + .disconnect = composite_disconnect, + + .max_speed = USB_SPEED_SUPER, + .driver = { + .owner = THIS_MODULE, + .name = "configfs-gadget", + }, +}; + +static struct config_group *gadgets_make( + struct config_group *group, + const char *name) +{ + struct gadget_info *gi; + + gi = kzalloc(sizeof(*gi), GFP_KERNEL); + if (!gi) + return ERR_PTR(-ENOMEM); + + gi->group.default_groups = gi->default_groups; + gi->group.default_groups[0] = &gi->functions_group; + gi->group.default_groups[1] = &gi->configs_group; + gi->group.default_groups[2] = &gi->strings_group; + + config_group_init_type_name(&gi->functions_group, "functions", + &functions_type); + config_group_init_type_name(&gi->configs_group, "configs", + &config_desc_type); + config_group_init_type_name(&gi->strings_group, "strings", + &gadget_strings_strings_type); + + gi->composite.bind = configfs_do_nothing; + gi->composite.unbind = configfs_do_nothing; + gi->composite.suspend = NULL; + gi->composite.resume = NULL; + gi->composite.max_speed = USB_SPEED_SUPER; + + mutex_init(&gi->lock); + INIT_LIST_HEAD(&gi->string_list); + INIT_LIST_HEAD(&gi->available_func); + + composite_init_dev(&gi->cdev); + gi->cdev.desc.bLength = USB_DT_DEVICE_SIZE; + gi->cdev.desc.bDescriptorType = USB_DT_DEVICE; + gi->cdev.desc.bcdDevice = cpu_to_le16(get_default_bcdDevice()); + + gi->composite.gadget_driver = configfs_driver_template; + + gi->composite.gadget_driver.function = kstrdup(name, GFP_KERNEL); + gi->composite.name = gi->composite.gadget_driver.function; + + if (!gi->composite.gadget_driver.function) + goto err; + +#ifdef CONFIG_USB_OTG + gi->otg.bLength = sizeof(struct usb_otg_descriptor); + gi->otg.bDescriptorType = USB_DT_OTG; + gi->otg.bmAttributes = USB_OTG_SRP | USB_OTG_HNP; +#endif + + config_group_init_type_name(&gi->group, name, + &gadget_root_type); + return &gi->group; +err: + kfree(gi); + return ERR_PTR(-ENOMEM); +} + +static void gadgets_drop(struct config_group *group, struct config_item *item) +{ + config_item_put(item); +} + +static struct configfs_group_operations gadgets_ops = { + .make_group = &gadgets_make, + .drop_item = &gadgets_drop, +}; + +static struct config_item_type gadgets_type = { + .ct_group_ops = &gadgets_ops, + .ct_owner = THIS_MODULE, +}; + +static struct configfs_subsystem gadget_subsys = { + .su_group = { + .cg_item = { + .ci_namebuf = "usb_gadget", + .ci_type = &gadgets_type, + }, + }, + .su_mutex = __MUTEX_INITIALIZER(gadget_subsys.su_mutex), +}; + +static int __init gadget_cfs_init(void) +{ + int ret; + + config_group_init(&gadget_subsys.su_group); + + ret = configfs_register_subsystem(&gadget_subsys); + return ret; +} +module_init(gadget_cfs_init); + +static void __exit gadget_cfs_exit(void) +{ + configfs_unregister_subsystem(&gadget_subsys); +} +module_exit(gadget_cfs_exit); diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 8cf0c0f6fa1f..a792e322f4f1 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -912,7 +912,6 @@ static int dummy_udc_start(struct usb_gadget *g, dum->devstatus = 0; dum->driver = driver; - dum->gadget.dev.driver = &driver->driver; dev_dbg(udc_dev(dum), "binding gadget driver '%s'\n", driver->driver.name); return 0; @@ -927,7 +926,6 @@ static int dummy_udc_stop(struct usb_gadget *g, dev_dbg(udc_dev(dum), "unregister gadget driver '%s'\n", driver->driver.name); - dum->gadget.dev.driver = NULL; dum->driver = NULL; return 0; @@ -937,11 +935,6 @@ static int dummy_udc_stop(struct usb_gadget *g, /* The gadget structure is stored inside the hcd structure and will be * released along with it. */ -static void dummy_gadget_release(struct device *dev) -{ - return; -} - static void init_dummy_udc_hw(struct dummy *dum) { int i; @@ -984,15 +977,7 @@ static int dummy_udc_probe(struct platform_device *pdev) dum->gadget.ops = &dummy_ops; dum->gadget.max_speed = USB_SPEED_SUPER; - dev_set_name(&dum->gadget.dev, "gadget"); dum->gadget.dev.parent = &pdev->dev; - dum->gadget.dev.release = dummy_gadget_release; - rc = device_register(&dum->gadget.dev); - if (rc < 0) { - put_device(&dum->gadget.dev); - return rc; - } - init_dummy_udc_hw(dum); rc = usb_add_gadget_udc(&pdev->dev, &dum->gadget); @@ -1008,7 +993,6 @@ static int dummy_udc_probe(struct platform_device *pdev) err_dev: usb_del_gadget_udc(&dum->gadget); err_udc: - device_unregister(&dum->gadget.dev); return rc; } @@ -1019,7 +1003,6 @@ static int dummy_udc_remove(struct platform_device *pdev) usb_del_gadget_udc(&dum->gadget); platform_set_drvdata(pdev, NULL); device_remove_file(&dum->gadget.dev, &dev_attr_function); - device_unregister(&dum->gadget.dev); return 0; } @@ -1923,7 +1906,7 @@ done: } /* usb 3.0 root hub device descriptor */ -struct { +static struct { struct usb_bos_descriptor bos; struct usb_ss_cap_descriptor ss_cap; } __packed usb3_bos_desc = { diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 18c3f423706e..56c8ecae9bc3 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -207,7 +207,7 @@ static struct usb_gadget_strings *dev_strings[] = { }; static u8 hostaddr[ETH_ALEN]; - +static struct eth_dev *the_dev; /*-------------------------------------------------------------------------*/ /* @@ -224,7 +224,7 @@ static int __init rndis_do_config(struct usb_configuration *c) c->bmAttributes |= USB_CONFIG_ATT_WAKEUP; } - return rndis_bind_config(c, hostaddr); + return rndis_bind_config(c, hostaddr, the_dev); } static struct usb_configuration rndis_config_driver = { @@ -257,11 +257,11 @@ static int __init eth_do_config(struct usb_configuration *c) } if (use_eem) - return eem_bind_config(c); + return eem_bind_config(c, the_dev); else if (can_support_ecm(c->cdev->gadget)) - return ecm_bind_config(c, hostaddr); + return ecm_bind_config(c, hostaddr, the_dev); else - return geth_bind_config(c, hostaddr); + return geth_bind_config(c, hostaddr, the_dev); } static struct usb_configuration eth_config_driver = { @@ -279,9 +279,9 @@ static int __init eth_bind(struct usb_composite_dev *cdev) int status; /* set up network link layer */ - status = gether_setup(cdev->gadget, hostaddr); - if (status < 0) - return status; + the_dev = gether_setup(cdev->gadget, hostaddr); + if (IS_ERR(the_dev)) + return PTR_ERR(the_dev); /* set up main config label and device descriptor */ if (use_eem) { @@ -338,13 +338,13 @@ static int __init eth_bind(struct usb_composite_dev *cdev) return 0; fail: - gether_cleanup(); + gether_cleanup(the_dev); return status; } static int __exit eth_unbind(struct usb_composite_dev *cdev) { - gether_cleanup(); + gether_cleanup(the_dev); return 0; } diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c index 1ae180baa597..4b7e33e5d9c6 100644 --- a/drivers/usb/gadget/f_acm.c +++ b/drivers/usb/gadget/f_acm.c @@ -715,13 +715,31 @@ fail: return status; } -static struct f_acm *acm_alloc_basic_func(void) +static void acm_unbind(struct usb_configuration *c, struct usb_function *f) +{ + struct f_acm *acm = func_to_acm(f); + + acm_string_defs[0].id = 0; + usb_free_all_descriptors(f); + if (acm->notify_req) + gs_free_req(acm->notify, acm->notify_req); +} + +static void acm_free_func(struct usb_function *f) +{ + struct f_acm *acm = func_to_acm(f); + + kfree(acm); +} + +static struct usb_function *acm_alloc_func(struct usb_function_instance *fi) { - struct f_acm *acm; + struct f_serial_opts *opts; + struct f_acm *acm; acm = kzalloc(sizeof(*acm), GFP_KERNEL); if (!acm) - return NULL; + return ERR_PTR(-ENOMEM); spin_lock_init(&acm->lock); @@ -730,109 +748,100 @@ static struct f_acm *acm_alloc_basic_func(void) acm->port.send_break = acm_send_break; acm->port.func.name = "acm"; + acm->port.func.strings = acm_strings; /* descriptors are per-instance copies */ acm->port.func.bind = acm_bind; acm->port.func.set_alt = acm_set_alt; acm->port.func.setup = acm_setup; acm->port.func.disable = acm_disable; - return acm; + opts = container_of(fi, struct f_serial_opts, func_inst); + acm->port_num = opts->port_num; + acm->port.func.unbind = acm_unbind; + acm->port.func.free_func = acm_free_func; + + return &acm->port.func; } -#ifdef USB_FACM_INCLUDED -static void -acm_old_unbind(struct usb_configuration *c, struct usb_function *f) +static inline struct f_serial_opts *to_f_serial_opts(struct config_item *item) { - struct f_acm *acm = func_to_acm(f); - - usb_free_all_descriptors(f); - if (acm->notify_req) - gs_free_req(acm->notify, acm->notify_req); - kfree(acm); + return container_of(to_config_group(item), struct f_serial_opts, + func_inst.group); } -/** - * acm_bind_config - add a CDC ACM function to a configuration - * @c: the configuration to support the CDC ACM instance - * @port_num: /dev/ttyGS* port this interface will use - * Context: single threaded during gadget setup - * - * Returns zero on success, else negative errno. - * - */ -int acm_bind_config(struct usb_configuration *c, u8 port_num) +CONFIGFS_ATTR_STRUCT(f_serial_opts); +static ssize_t f_acm_attr_show(struct config_item *item, + struct configfs_attribute *attr, + char *page) { - struct f_acm *acm; - int status; - - /* allocate and initialize one new instance */ - acm = acm_alloc_basic_func(); - if (!acm) - return -ENOMEM; - - acm->port_num = port_num; - acm->port.func.unbind = acm_old_unbind; - - status = usb_add_function(c, &acm->port.func); - if (status) - kfree(acm); - return status; + struct f_serial_opts *opts = to_f_serial_opts(item); + struct f_serial_opts_attribute *f_serial_opts_attr = + container_of(attr, struct f_serial_opts_attribute, attr); + ssize_t ret = 0; + + if (f_serial_opts_attr->show) + ret = f_serial_opts_attr->show(opts, page); + return ret; } -#else - -static void acm_unbind(struct usb_configuration *c, struct usb_function *f) +static void acm_attr_release(struct config_item *item) { - struct f_acm *acm = func_to_acm(f); + struct f_serial_opts *opts = to_f_serial_opts(item); - acm_string_defs[0].id = 0; - usb_free_all_descriptors(f); - if (acm->notify_req) - gs_free_req(acm->notify, acm->notify_req); + usb_put_function_instance(&opts->func_inst); } -static void acm_free_func(struct usb_function *f) -{ - struct f_acm *acm = func_to_acm(f); +static struct configfs_item_operations acm_item_ops = { + .release = acm_attr_release, + .show_attribute = f_acm_attr_show, +}; - kfree(acm); +static ssize_t f_acm_port_num_show(struct f_serial_opts *opts, char *page) +{ + return sprintf(page, "%u\n", opts->port_num); } -static struct usb_function *acm_alloc_func(struct usb_function_instance *fi) -{ - struct f_serial_opts *opts; - struct f_acm *acm; +static struct f_serial_opts_attribute f_acm_port_num = + __CONFIGFS_ATTR_RO(port_num, f_acm_port_num_show); - acm = acm_alloc_basic_func(); - if (!acm) - return ERR_PTR(-ENOMEM); - opts = container_of(fi, struct f_serial_opts, func_inst); - acm->port_num = opts->port_num; - acm->port.func.unbind = acm_unbind; - acm->port.func.free_func = acm_free_func; +static struct configfs_attribute *acm_attrs[] = { + &f_acm_port_num.attr, + NULL, +}; - return &acm->port.func; -} +static struct config_item_type acm_func_type = { + .ct_item_ops = &acm_item_ops, + .ct_attrs = acm_attrs, + .ct_owner = THIS_MODULE, +}; static void acm_free_instance(struct usb_function_instance *fi) { struct f_serial_opts *opts; opts = container_of(fi, struct f_serial_opts, func_inst); + gserial_free_line(opts->port_num); kfree(opts); } static struct usb_function_instance *acm_alloc_instance(void) { struct f_serial_opts *opts; + int ret; opts = kzalloc(sizeof(*opts), GFP_KERNEL); if (!opts) return ERR_PTR(-ENOMEM); opts->func_inst.free_func_inst = acm_free_instance; + ret = gserial_alloc_line(&opts->port_num); + if (ret) { + kfree(opts); + return ERR_PTR(ret); + } + config_group_init_type_name(&opts->func_inst.group, "", + &acm_func_type); return &opts->func_inst; } DECLARE_USB_FUNCTION_INIT(acm, acm_alloc_instance, acm_alloc_func); MODULE_LICENSE("GPL"); -#endif diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c index 83420a310fb7..d893d6929079 100644 --- a/drivers/usb/gadget/f_ecm.c +++ b/drivers/usb/gadget/f_ecm.c @@ -824,7 +824,8 @@ ecm_unbind(struct usb_configuration *c, struct usb_function *f) * for calling @gether_cleanup() before module unload. */ int -ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) +ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], + struct eth_dev *dev) { struct f_ecm *ecm; int status; @@ -852,6 +853,7 @@ ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) snprintf(ecm->ethaddr, sizeof ecm->ethaddr, "%pm", ethaddr); ecm_string_defs[1].s = ecm->ethaddr; + ecm->port.ioport = dev; ecm->port.cdc_filter = DEFAULT_FILTER; ecm->port.func.name = "cdc_ethernet"; diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c index cf0ebee85563..f4e0bbef602a 100644 --- a/drivers/usb/gadget/f_eem.c +++ b/drivers/usb/gadget/f_eem.c @@ -528,7 +528,7 @@ error: * Caller must have called @gether_setup(). Caller is also responsible * for calling @gether_cleanup() before module unload. */ -int __init eem_bind_config(struct usb_configuration *c) +int __init eem_bind_config(struct usb_configuration *c, struct eth_dev *dev) { struct f_eem *eem; int status; @@ -549,6 +549,7 @@ int __init eem_bind_config(struct usb_configuration *c) if (!eem) return -ENOMEM; + eem->port.ioport = dev; eem->port.cdc_filter = DEFAULT_FILTER; eem->port.func.name = "cdc_eem"; diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c index 5e7557e23ecc..ee19bc8d0040 100644 --- a/drivers/usb/gadget/f_ncm.c +++ b/drivers/usb/gadget/f_ncm.c @@ -1287,7 +1287,8 @@ ncm_unbind(struct usb_configuration *c, struct usb_function *f) * Caller must have called @gether_setup(). Caller is also responsible * for calling @gether_cleanup() before module unload. */ -int __init ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) +int __init ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], + struct eth_dev *dev) { struct f_ncm *ncm; int status; @@ -1321,6 +1322,7 @@ int __init ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) spin_lock_init(&ncm->lock); ncm_reset_values(ncm); + ncm->port.ioport = dev; ncm->port.is_fixed = true; ncm->port.func.name = "cdc_network"; diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c index 36a004563b82..8aa2be5329bc 100644 --- a/drivers/usb/gadget/f_obex.c +++ b/drivers/usb/gadget/f_obex.c @@ -72,7 +72,7 @@ static struct usb_gadget_strings *obex_strings[] = { /*-------------------------------------------------------------------------*/ -static struct usb_interface_descriptor obex_control_intf __initdata = { +static struct usb_interface_descriptor obex_control_intf = { .bLength = sizeof(obex_control_intf), .bDescriptorType = USB_DT_INTERFACE, .bInterfaceNumber = 0, @@ -83,7 +83,7 @@ static struct usb_interface_descriptor obex_control_intf __initdata = { .bInterfaceSubClass = USB_CDC_SUBCLASS_OBEX, }; -static struct usb_interface_descriptor obex_data_nop_intf __initdata = { +static struct usb_interface_descriptor obex_data_nop_intf = { .bLength = sizeof(obex_data_nop_intf), .bDescriptorType = USB_DT_INTERFACE, .bInterfaceNumber = 1, @@ -93,7 +93,7 @@ static struct usb_interface_descriptor obex_data_nop_intf __initdata = { .bInterfaceClass = USB_CLASS_CDC_DATA, }; -static struct usb_interface_descriptor obex_data_intf __initdata = { +static struct usb_interface_descriptor obex_data_intf = { .bLength = sizeof(obex_data_intf), .bDescriptorType = USB_DT_INTERFACE, .bInterfaceNumber = 2, @@ -103,14 +103,14 @@ static struct usb_interface_descriptor obex_data_intf __initdata = { .bInterfaceClass = USB_CLASS_CDC_DATA, }; -static struct usb_cdc_header_desc obex_cdc_header_desc __initdata = { +static struct usb_cdc_header_desc obex_cdc_header_desc = { .bLength = sizeof(obex_cdc_header_desc), .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_HEADER_TYPE, .bcdCDC = cpu_to_le16(0x0120), }; -static struct usb_cdc_union_desc obex_cdc_union_desc __initdata = { +static struct usb_cdc_union_desc obex_cdc_union_desc = { .bLength = sizeof(obex_cdc_union_desc), .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_UNION_TYPE, @@ -118,7 +118,7 @@ static struct usb_cdc_union_desc obex_cdc_union_desc __initdata = { .bSlaveInterface0 = 2, }; -static struct usb_cdc_obex_desc obex_desc __initdata = { +static struct usb_cdc_obex_desc obex_desc = { .bLength = sizeof(obex_desc), .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_OBEX_TYPE, @@ -127,7 +127,7 @@ static struct usb_cdc_obex_desc obex_desc __initdata = { /* High-Speed Support */ -static struct usb_endpoint_descriptor obex_hs_ep_out_desc __initdata = { +static struct usb_endpoint_descriptor obex_hs_ep_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, @@ -136,7 +136,7 @@ static struct usb_endpoint_descriptor obex_hs_ep_out_desc __initdata = { .wMaxPacketSize = cpu_to_le16(512), }; -static struct usb_endpoint_descriptor obex_hs_ep_in_desc __initdata = { +static struct usb_endpoint_descriptor obex_hs_ep_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, @@ -145,7 +145,7 @@ static struct usb_endpoint_descriptor obex_hs_ep_in_desc __initdata = { .wMaxPacketSize = cpu_to_le16(512), }; -static struct usb_descriptor_header *hs_function[] __initdata = { +static struct usb_descriptor_header *hs_function[] = { (struct usb_descriptor_header *) &obex_control_intf, (struct usb_descriptor_header *) &obex_cdc_header_desc, (struct usb_descriptor_header *) &obex_desc, @@ -160,7 +160,7 @@ static struct usb_descriptor_header *hs_function[] __initdata = { /* Full-Speed Support */ -static struct usb_endpoint_descriptor obex_fs_ep_in_desc __initdata = { +static struct usb_endpoint_descriptor obex_fs_ep_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, @@ -168,7 +168,7 @@ static struct usb_endpoint_descriptor obex_fs_ep_in_desc __initdata = { .bmAttributes = USB_ENDPOINT_XFER_BULK, }; -static struct usb_endpoint_descriptor obex_fs_ep_out_desc __initdata = { +static struct usb_endpoint_descriptor obex_fs_ep_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, @@ -176,7 +176,7 @@ static struct usb_endpoint_descriptor obex_fs_ep_out_desc __initdata = { .bmAttributes = USB_ENDPOINT_XFER_BULK, }; -static struct usb_descriptor_header *fs_function[] __initdata = { +static struct usb_descriptor_header *fs_function[] = { (struct usb_descriptor_header *) &obex_control_intf, (struct usb_descriptor_header *) &obex_cdc_header_desc, (struct usb_descriptor_header *) &obex_desc, @@ -290,14 +290,43 @@ static void obex_disconnect(struct gserial *g) /*-------------------------------------------------------------------------*/ -static int __init -obex_bind(struct usb_configuration *c, struct usb_function *f) +/* Some controllers can't support CDC OBEX ... */ +static inline bool can_support_obex(struct usb_configuration *c) +{ + /* Since the first interface is a NOP, we can ignore the + * issue of multi-interface support on most controllers. + * + * Altsettings are mandatory, however... + */ + if (!gadget_supports_altsettings(c->cdev->gadget)) + return false; + + /* everything else is *probably* fine ... */ + return true; +} + +static int obex_bind(struct usb_configuration *c, struct usb_function *f) { struct usb_composite_dev *cdev = c->cdev; struct f_obex *obex = func_to_obex(f); int status; struct usb_ep *ep; + if (!can_support_obex(c)) + return -EINVAL; + + if (obex_string_defs[OBEX_CTRL_IDX].id == 0) { + status = usb_string_ids_tab(c->cdev, obex_string_defs); + if (status < 0) + return status; + obex_control_intf.iInterface = + obex_string_defs[OBEX_CTRL_IDX].id; + + status = obex_string_defs[OBEX_DATA_IDX].id; + obex_data_nop_intf.iInterface = status; + obex_data_intf.iInterface = status; + } + /* allocate instance-specific interface IDs, and patch descriptors */ status = usb_interface_id(c, f); @@ -319,6 +348,7 @@ obex_bind(struct usb_configuration *c, struct usb_function *f) /* allocate instance-specific endpoints */ + status = -ENODEV; ep = usb_ep_autoconfig(cdev->gadget, &obex_fs_ep_in_desc); if (!ep) goto fail; @@ -376,29 +406,16 @@ fail: return status; } +#ifdef USBF_OBEX_INCLUDED + static void -obex_unbind(struct usb_configuration *c, struct usb_function *f) +obex_old_unbind(struct usb_configuration *c, struct usb_function *f) { obex_string_defs[OBEX_CTRL_IDX].id = 0; usb_free_all_descriptors(f); kfree(func_to_obex(f)); } -/* Some controllers can't support CDC OBEX ... */ -static inline bool can_support_obex(struct usb_configuration *c) -{ - /* Since the first interface is a NOP, we can ignore the - * issue of multi-interface support on most controllers. - * - * Altsettings are mandatory, however... - */ - if (!gadget_supports_altsettings(c->cdev->gadget)) - return false; - - /* everything else is *probably* fine ... */ - return true; -} - /** * obex_bind_config - add a CDC OBEX function to a configuration * @c: the configuration to support the CDC OBEX instance @@ -412,21 +429,6 @@ int __init obex_bind_config(struct usb_configuration *c, u8 port_num) struct f_obex *obex; int status; - if (!can_support_obex(c)) - return -EINVAL; - - if (obex_string_defs[OBEX_CTRL_IDX].id == 0) { - status = usb_string_ids_tab(c->cdev, obex_string_defs); - if (status < 0) - return status; - obex_control_intf.iInterface = - obex_string_defs[OBEX_CTRL_IDX].id; - - status = obex_string_defs[OBEX_DATA_IDX].id; - obex_data_nop_intf.iInterface = status; - obex_data_intf.iInterface = status; - } - /* allocate and initialize one new instance */ obex = kzalloc(sizeof *obex, GFP_KERNEL); if (!obex) @@ -441,7 +443,7 @@ int __init obex_bind_config(struct usb_configuration *c, u8 port_num) obex->port.func.strings = obex_strings; /* descriptors are per-instance copies */ obex->port.func.bind = obex_bind; - obex->port.func.unbind = obex_unbind; + obex->port.func.unbind = obex_old_unbind; obex->port.func.set_alt = obex_set_alt; obex->port.func.get_alt = obex_get_alt; obex->port.func.disable = obex_disable; @@ -453,5 +455,138 @@ int __init obex_bind_config(struct usb_configuration *c, u8 port_num) return status; } +#else + +static inline struct f_serial_opts *to_f_serial_opts(struct config_item *item) +{ + return container_of(to_config_group(item), struct f_serial_opts, + func_inst.group); +} + +CONFIGFS_ATTR_STRUCT(f_serial_opts); +static ssize_t f_obex_attr_show(struct config_item *item, + struct configfs_attribute *attr, + char *page) +{ + struct f_serial_opts *opts = to_f_serial_opts(item); + struct f_serial_opts_attribute *f_serial_opts_attr = + container_of(attr, struct f_serial_opts_attribute, attr); + ssize_t ret = 0; + + if (f_serial_opts_attr->show) + ret = f_serial_opts_attr->show(opts, page); + + return ret; +} + +static void obex_attr_release(struct config_item *item) +{ + struct f_serial_opts *opts = to_f_serial_opts(item); + + usb_put_function_instance(&opts->func_inst); +} + +static struct configfs_item_operations obex_item_ops = { + .release = obex_attr_release, + .show_attribute = f_obex_attr_show, +}; + +static ssize_t f_obex_port_num_show(struct f_serial_opts *opts, char *page) +{ + return sprintf(page, "%u\n", opts->port_num); +} + +static struct f_serial_opts_attribute f_obex_port_num = + __CONFIGFS_ATTR_RO(port_num, f_obex_port_num_show); + +static struct configfs_attribute *acm_attrs[] = { + &f_obex_port_num.attr, + NULL, +}; + +static struct config_item_type obex_func_type = { + .ct_item_ops = &obex_item_ops, + .ct_attrs = acm_attrs, + .ct_owner = THIS_MODULE, +}; + +static void obex_free_inst(struct usb_function_instance *f) +{ + struct f_serial_opts *opts; + + opts = container_of(f, struct f_serial_opts, func_inst); + gserial_free_line(opts->port_num); + kfree(opts); +} + +static struct usb_function_instance *obex_alloc_inst(void) +{ + struct f_serial_opts *opts; + int ret; + + opts = kzalloc(sizeof(*opts), GFP_KERNEL); + if (!opts) + return ERR_PTR(-ENOMEM); + + opts->func_inst.free_func_inst = obex_free_inst; + ret = gserial_alloc_line(&opts->port_num); + if (ret) { + kfree(opts); + return ERR_PTR(ret); + } + config_group_init_type_name(&opts->func_inst.group, "", + &obex_func_type); + + return &opts->func_inst; +} + +static void obex_free(struct usb_function *f) +{ + struct f_obex *obex; + + obex = func_to_obex(f); + kfree(obex); +} + +static void obex_unbind(struct usb_configuration *c, struct usb_function *f) +{ + obex_string_defs[OBEX_CTRL_IDX].id = 0; + usb_free_all_descriptors(f); +} + +struct usb_function *obex_alloc(struct usb_function_instance *fi) +{ + struct f_obex *obex; + struct f_serial_opts *opts; + + /* allocate and initialize one new instance */ + obex = kzalloc(sizeof(*obex), GFP_KERNEL); + if (!obex) + return ERR_PTR(-ENOMEM); + + opts = container_of(fi, struct f_serial_opts, func_inst); + + obex->port_num = opts->port_num; + + obex->port.connect = obex_connect; + obex->port.disconnect = obex_disconnect; + + obex->port.func.name = "obex"; + obex->port.func.strings = obex_strings; + /* descriptors are per-instance copies */ + obex->port.func.bind = obex_bind; + obex->port.func.unbind = obex_unbind; + obex->port.func.set_alt = obex_set_alt; + obex->port.func.get_alt = obex_get_alt; + obex->port.func.disable = obex_disable; + obex->port.func.free_func = obex_free; + + return &obex->port.func; +} + +DECLARE_USB_FUNCTION_INIT(obex, obex_alloc_inst, obex_alloc); + +#endif + MODULE_AUTHOR("Felipe Balbi"); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c index cc9c49c57c80..36e8c44d8e5e 100644 --- a/drivers/usb/gadget/f_rndis.c +++ b/drivers/usb/gadget/f_rndis.c @@ -813,7 +813,7 @@ static inline bool can_support_rndis(struct usb_configuration *c) int rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], - u32 vendorID, const char *manufacturer) + u32 vendorID, const char *manufacturer, struct eth_dev *dev) { struct f_rndis *rndis; int status; @@ -846,6 +846,7 @@ rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], rndis->vendorID = vendorID; rndis->manufacturer = manufacturer; + rndis->port.ioport = dev; /* RNDIS activates when the host changes this filter */ rndis->port.cdc_filter = 0; diff --git a/drivers/usb/gadget/f_serial.c b/drivers/usb/gadget/f_serial.c index da33cfb3031d..981113c9924d 100644 --- a/drivers/usb/gadget/f_serial.c +++ b/drivers/usb/gadget/f_serial.c @@ -12,6 +12,7 @@ #include <linux/slab.h> #include <linux/kernel.h> +#include <linux/module.h> #include <linux/device.h> #include "u_serial.h" @@ -42,7 +43,7 @@ static inline struct f_gser *func_to_gser(struct usb_function *f) /* interface descriptor: */ -static struct usb_interface_descriptor gser_interface_desc __initdata = { +static struct usb_interface_descriptor gser_interface_desc = { .bLength = USB_DT_INTERFACE_SIZE, .bDescriptorType = USB_DT_INTERFACE, /* .bInterfaceNumber = DYNAMIC */ @@ -55,21 +56,21 @@ static struct usb_interface_descriptor gser_interface_desc __initdata = { /* full speed support: */ -static struct usb_endpoint_descriptor gser_fs_in_desc __initdata = { +static struct usb_endpoint_descriptor gser_fs_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_BULK, }; -static struct usb_endpoint_descriptor gser_fs_out_desc __initdata = { +static struct usb_endpoint_descriptor gser_fs_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_OUT, .bmAttributes = USB_ENDPOINT_XFER_BULK, }; -static struct usb_descriptor_header *gser_fs_function[] __initdata = { +static struct usb_descriptor_header *gser_fs_function[] = { (struct usb_descriptor_header *) &gser_interface_desc, (struct usb_descriptor_header *) &gser_fs_in_desc, (struct usb_descriptor_header *) &gser_fs_out_desc, @@ -78,47 +79,47 @@ static struct usb_descriptor_header *gser_fs_function[] __initdata = { /* high speed support: */ -static struct usb_endpoint_descriptor gser_hs_in_desc __initdata = { +static struct usb_endpoint_descriptor gser_hs_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = cpu_to_le16(512), }; -static struct usb_endpoint_descriptor gser_hs_out_desc __initdata = { +static struct usb_endpoint_descriptor gser_hs_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = cpu_to_le16(512), }; -static struct usb_descriptor_header *gser_hs_function[] __initdata = { +static struct usb_descriptor_header *gser_hs_function[] = { (struct usb_descriptor_header *) &gser_interface_desc, (struct usb_descriptor_header *) &gser_hs_in_desc, (struct usb_descriptor_header *) &gser_hs_out_desc, NULL, }; -static struct usb_endpoint_descriptor gser_ss_in_desc __initdata = { +static struct usb_endpoint_descriptor gser_ss_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = cpu_to_le16(1024), }; -static struct usb_endpoint_descriptor gser_ss_out_desc __initdata = { +static struct usb_endpoint_descriptor gser_ss_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, .wMaxPacketSize = cpu_to_le16(1024), }; -static struct usb_ss_ep_comp_descriptor gser_ss_bulk_comp_desc __initdata = { +static struct usb_ss_ep_comp_descriptor gser_ss_bulk_comp_desc = { .bLength = sizeof gser_ss_bulk_comp_desc, .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, }; -static struct usb_descriptor_header *gser_ss_function[] __initdata = { +static struct usb_descriptor_header *gser_ss_function[] = { (struct usb_descriptor_header *) &gser_interface_desc, (struct usb_descriptor_header *) &gser_ss_in_desc, (struct usb_descriptor_header *) &gser_ss_bulk_comp_desc, @@ -183,14 +184,25 @@ static void gser_disable(struct usb_function *f) /* serial function driver setup/binding */ -static int __init -gser_bind(struct usb_configuration *c, struct usb_function *f) +static int gser_bind(struct usb_configuration *c, struct usb_function *f) { struct usb_composite_dev *cdev = c->cdev; struct f_gser *gser = func_to_gser(f); int status; struct usb_ep *ep; + /* REVISIT might want instance-specific strings to help + * distinguish instances ... + */ + + /* maybe allocate device-global string ID */ + if (gser_string_defs[0].id == 0) { + status = usb_string_id(c->cdev); + if (status < 0) + return status; + gser_string_defs[0].id = status; + } + /* allocate instance-specific interface IDs */ status = usb_interface_id(c, f); if (status < 0) @@ -246,44 +258,115 @@ fail: return status; } -static void -gser_unbind(struct usb_configuration *c, struct usb_function *f) +static inline struct f_serial_opts *to_f_serial_opts(struct config_item *item) { - usb_free_all_descriptors(f); - kfree(func_to_gser(f)); + return container_of(to_config_group(item), struct f_serial_opts, + func_inst.group); } -/** - * gser_bind_config - add a generic serial function to a configuration - * @c: the configuration to support the serial instance - * @port_num: /dev/ttyGS* port this interface will use - * Context: single threaded during gadget setup - * - * Returns zero on success, else negative errno. - */ -int __init gser_bind_config(struct usb_configuration *c, u8 port_num) +CONFIGFS_ATTR_STRUCT(f_serial_opts); +static ssize_t f_serial_attr_show(struct config_item *item, + struct configfs_attribute *attr, + char *page) { - struct f_gser *gser; - int status; + struct f_serial_opts *opts = to_f_serial_opts(item); + struct f_serial_opts_attribute *f_serial_opts_attr = + container_of(attr, struct f_serial_opts_attribute, attr); + ssize_t ret = 0; - /* REVISIT might want instance-specific strings to help - * distinguish instances ... - */ + if (f_serial_opts_attr->show) + ret = f_serial_opts_attr->show(opts, page); - /* maybe allocate device-global string ID */ - if (gser_string_defs[0].id == 0) { - status = usb_string_id(c->cdev); - if (status < 0) - return status; - gser_string_defs[0].id = status; + return ret; +} + +static void serial_attr_release(struct config_item *item) +{ + struct f_serial_opts *opts = to_f_serial_opts(item); + + usb_put_function_instance(&opts->func_inst); +} + +static struct configfs_item_operations serial_item_ops = { + .release = serial_attr_release, + .show_attribute = f_serial_attr_show, +}; + +static ssize_t f_serial_port_num_show(struct f_serial_opts *opts, char *page) +{ + return sprintf(page, "%u\n", opts->port_num); +} + +static struct f_serial_opts_attribute f_serial_port_num = + __CONFIGFS_ATTR_RO(port_num, f_serial_port_num_show); + +static struct configfs_attribute *acm_attrs[] = { + &f_serial_port_num.attr, + NULL, +}; + +static struct config_item_type serial_func_type = { + .ct_item_ops = &serial_item_ops, + .ct_attrs = acm_attrs, + .ct_owner = THIS_MODULE, +}; + +static void gser_free_inst(struct usb_function_instance *f) +{ + struct f_serial_opts *opts; + + opts = container_of(f, struct f_serial_opts, func_inst); + gserial_free_line(opts->port_num); + kfree(opts); +} + +static struct usb_function_instance *gser_alloc_inst(void) +{ + struct f_serial_opts *opts; + int ret; + + opts = kzalloc(sizeof(*opts), GFP_KERNEL); + if (!opts) + return ERR_PTR(-ENOMEM); + + opts->func_inst.free_func_inst = gser_free_inst; + ret = gserial_alloc_line(&opts->port_num); + if (ret) { + kfree(opts); + return ERR_PTR(ret); } + config_group_init_type_name(&opts->func_inst.group, "", + &serial_func_type); + + return &opts->func_inst; +} + +static void gser_free(struct usb_function *f) +{ + struct f_gser *serial; + + serial = func_to_gser(f); + kfree(serial); +} + +static void gser_unbind(struct usb_configuration *c, struct usb_function *f) +{ + usb_free_all_descriptors(f); +} + +struct usb_function *gser_alloc(struct usb_function_instance *fi) +{ + struct f_gser *gser; + struct f_serial_opts *opts; /* allocate and initialize one new instance */ - gser = kzalloc(sizeof *gser, GFP_KERNEL); + gser = kzalloc(sizeof(*gser), GFP_KERNEL); if (!gser) - return -ENOMEM; + return ERR_PTR(-ENOMEM); - gser->port_num = port_num; + opts = container_of(fi, struct f_serial_opts, func_inst); + + gser->port_num = opts->port_num; gser->port.func.name = "gser"; gser->port.func.strings = gser_strings; @@ -291,9 +374,12 @@ int __init gser_bind_config(struct usb_configuration *c, u8 port_num) gser->port.func.unbind = gser_unbind; gser->port.func.set_alt = gser_set_alt; gser->port.func.disable = gser_disable; + gser->port.func.free_func = gser_free; - status = usb_add_function(c, &gser->port.func); - if (status) - kfree(gser); - return status; + return &gser->port.func; } + +DECLARE_USB_FUNCTION_INIT(gser, gser_alloc_inst, gser_alloc); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Al Borchers"); +MODULE_AUTHOR("David Brownell"); diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c index 41adf3ef96c2..a8895859a221 100644 --- a/drivers/usb/gadget/f_sourcesink.c +++ b/drivers/usb/gadget/f_sourcesink.c @@ -898,7 +898,7 @@ static struct usb_function *source_sink_alloc_func( return &ss->function; } -static void acm_free_instance(struct usb_function_instance *fi) +static void source_sink_free_instance(struct usb_function_instance *fi) { struct f_ss_opts *ss_opts; @@ -913,7 +913,7 @@ static struct usb_function_instance *source_sink_alloc_inst(void) ss_opts = kzalloc(sizeof(*ss_opts), GFP_KERNEL); if (!ss_opts) return ERR_PTR(-ENOMEM); - ss_opts->func_inst.free_func_inst = acm_free_instance; + ss_opts->func_inst.free_func_inst = source_sink_free_instance; return &ss_opts->func_inst; } DECLARE_USB_FUNCTION(SourceSink, source_sink_alloc_inst, diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c index f172bd152fbb..185d6f5e4e4d 100644 --- a/drivers/usb/gadget/f_subset.c +++ b/drivers/usb/gadget/f_subset.c @@ -380,7 +380,8 @@ geth_unbind(struct usb_configuration *c, struct usb_function *f) * Caller must have called @gether_setup(). Caller is also responsible * for calling @gether_cleanup() before module unload. */ -int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) +int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], + struct eth_dev *dev) { struct f_gether *geth; int status; @@ -406,6 +407,7 @@ int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) snprintf(geth->ethaddr, sizeof geth->ethaddr, "%pm", ethaddr); geth_string_defs[1].s = geth->ethaddr; + geth->port.ioport = dev; geth->port.cdc_filter = DEFAULT_FILTER; geth->port.func.name = "cdc_subset"; diff --git a/drivers/usb/gadget/f_uvc.c b/drivers/usb/gadget/f_uvc.c index 92efd6ec48af..38dcedddc52c 100644 --- a/drivers/usb/gadget/f_uvc.c +++ b/drivers/usb/gadget/f_uvc.c @@ -33,19 +33,15 @@ unsigned int uvc_gadget_trace_param; /*-------------------------------------------------------------------------*/ /* module parameters specific to the Video streaming endpoint */ -static unsigned streaming_interval = 1; +static unsigned int streaming_interval = 1; module_param(streaming_interval, uint, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(streaming_interval, "1 - 16"); -static unsigned streaming_maxpacket = 1024; +static unsigned int streaming_maxpacket = 1024; module_param(streaming_maxpacket, uint, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(streaming_maxpacket, "0 - 1023 (fs), 0 - 1024 (hs/ss)"); +MODULE_PARM_DESC(streaming_maxpacket, "1 - 1023 (FS), 1 - 3072 (hs/ss)"); -static unsigned streaming_mult; -module_param(streaming_mult, uint, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(streaming_mult, "0 - 2 (hs/ss only)"); - -static unsigned streaming_maxburst; +static unsigned int streaming_maxburst; module_param(streaming_maxburst, uint, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(streaming_maxburst, "0 - 15 (ss only)"); @@ -55,13 +51,11 @@ MODULE_PARM_DESC(streaming_maxburst, "0 - 15 (ss only)"); /* string IDs are assigned dynamically */ -#define UVC_STRING_ASSOCIATION_IDX 0 -#define UVC_STRING_CONTROL_IDX 1 -#define UVC_STRING_STREAMING_IDX 2 +#define UVC_STRING_CONTROL_IDX 0 +#define UVC_STRING_STREAMING_IDX 1 static struct usb_string uvc_en_us_strings[] = { - [UVC_STRING_ASSOCIATION_IDX].s = "UVC Camera", - [UVC_STRING_CONTROL_IDX].s = "Video Control", + [UVC_STRING_CONTROL_IDX].s = "UVC Camera", [UVC_STRING_STREAMING_IDX].s = "Video Streaming", { } }; @@ -79,7 +73,7 @@ static struct usb_gadget_strings *uvc_function_strings[] = { #define UVC_INTF_VIDEO_CONTROL 0 #define UVC_INTF_VIDEO_STREAMING 1 -#define STATUS_BYTECOUNT 16 /* 16 bytes status */ +#define UVC_STATUS_MAX_PACKET_SIZE 16 /* 16 bytes status */ static struct usb_interface_assoc_descriptor uvc_iad __initdata = { .bLength = sizeof(uvc_iad), @@ -104,20 +98,29 @@ static struct usb_interface_descriptor uvc_control_intf __initdata = { .iInterface = 0, }; -static struct usb_endpoint_descriptor uvc_fs_control_ep __initdata = { +static struct usb_endpoint_descriptor uvc_control_ep __initdata = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = cpu_to_le16(STATUS_BYTECOUNT), + .wMaxPacketSize = cpu_to_le16(UVC_STATUS_MAX_PACKET_SIZE), .bInterval = 8, }; +static struct usb_ss_ep_comp_descriptor uvc_ss_control_comp __initdata = { + .bLength = sizeof(uvc_ss_control_comp), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + /* The following 3 values can be tweaked if necessary. */ + .bMaxBurst = 0, + .bmAttributes = 0, + .wBytesPerInterval = cpu_to_le16(UVC_STATUS_MAX_PACKET_SIZE), +}; + static struct uvc_control_endpoint_descriptor uvc_control_cs_ep __initdata = { .bLength = UVC_DT_CONTROL_ENDPOINT_SIZE, .bDescriptorType = USB_DT_CS_ENDPOINT, .bDescriptorSubType = UVC_EP_INTERRUPT, - .wMaxTransferSize = cpu_to_le16(STATUS_BYTECOUNT), + .wMaxTransferSize = cpu_to_le16(UVC_STATUS_MAX_PACKET_SIZE), }; static struct usb_interface_descriptor uvc_streaming_intf_alt0 __initdata = { @@ -144,63 +147,53 @@ static struct usb_interface_descriptor uvc_streaming_intf_alt1 __initdata = { .iInterface = 0, }; -static struct usb_endpoint_descriptor uvc_fs_streaming_ep = { +static struct usb_endpoint_descriptor uvc_fs_streaming_ep __initdata = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, - .bmAttributes = USB_ENDPOINT_XFER_ISOC, - .wMaxPacketSize = cpu_to_le16(512), - .bInterval = 1, + .bmAttributes = USB_ENDPOINT_SYNC_ASYNC + | USB_ENDPOINT_XFER_ISOC, + /* The wMaxPacketSize and bInterval values will be initialized from + * module parameters. + */ + .wMaxPacketSize = 0, + .bInterval = 0, }; -static struct usb_endpoint_descriptor uvc_hs_streaming_ep = { +static struct usb_endpoint_descriptor uvc_hs_streaming_ep __initdata = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, - .bmAttributes = USB_ENDPOINT_XFER_ISOC, - .wMaxPacketSize = cpu_to_le16(1024), - .bInterval = 1, -}; - -/* super speed support */ -static struct usb_endpoint_descriptor uvc_ss_control_ep __initdata = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - .bEndpointAddress = USB_DIR_IN, - .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = cpu_to_le16(STATUS_BYTECOUNT), - .bInterval = 8, -}; - -static struct usb_ss_ep_comp_descriptor uvc_ss_control_comp __initdata = { - .bLength = sizeof uvc_ss_control_comp, - .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, - - /* the following 3 values can be tweaked if necessary */ - /* .bMaxBurst = 0, */ - /* .bmAttributes = 0, */ - .wBytesPerInterval = cpu_to_le16(STATUS_BYTECOUNT), + .bmAttributes = USB_ENDPOINT_SYNC_ASYNC + | USB_ENDPOINT_XFER_ISOC, + /* The wMaxPacketSize and bInterval values will be initialized from + * module parameters. + */ + .wMaxPacketSize = 0, + .bInterval = 0, }; static struct usb_endpoint_descriptor uvc_ss_streaming_ep __initdata = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, - .bEndpointAddress = USB_DIR_IN, - .bmAttributes = USB_ENDPOINT_XFER_ISOC, - .wMaxPacketSize = cpu_to_le16(1024), - .bInterval = 4, + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_SYNC_ASYNC + | USB_ENDPOINT_XFER_ISOC, + /* The wMaxPacketSize and bInterval values will be initialized from + * module parameters. + */ + .wMaxPacketSize = 0, + .bInterval = 0, }; -static struct usb_ss_ep_comp_descriptor uvc_ss_streaming_comp = { - .bLength = sizeof uvc_ss_streaming_comp, - .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, - - /* the following 3 values can be tweaked if necessary */ - .bMaxBurst = 0, - .bmAttributes = 0, - .wBytesPerInterval = cpu_to_le16(1024), +static struct usb_ss_ep_comp_descriptor uvc_ss_streaming_comp __initdata = { + .bLength = sizeof(uvc_ss_streaming_comp), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + /* The following 3 values can be tweaked if necessary. */ + .bMaxBurst = 0, + .bmAttributes = 0, + .wBytesPerInterval = cpu_to_le16(1024), }; static const struct usb_descriptor_header * const uvc_fs_streaming[] = { @@ -273,6 +266,13 @@ uvc_function_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) return 0; } +void uvc_function_setup_continue(struct uvc_device *uvc) +{ + struct usb_composite_dev *cdev = uvc->func.config->cdev; + + usb_composite_setup_continue(cdev); +} + static int uvc_function_get_alt(struct usb_function *f, unsigned interface) { @@ -335,7 +335,7 @@ uvc_function_set_alt(struct usb_function *f, unsigned interface, unsigned alt) v4l2_event_queue(uvc->vdev, &v4l2_event); uvc->state = UVC_STATE_CONNECTED; - break; + return 0; case 1: if (uvc->state != UVC_STATE_CONNECTED) @@ -352,15 +352,11 @@ uvc_function_set_alt(struct usb_function *f, unsigned interface, unsigned alt) memset(&v4l2_event, 0, sizeof(v4l2_event)); v4l2_event.type = UVC_EVENT_STREAMON; v4l2_event_queue(uvc->vdev, &v4l2_event); - - uvc->state = UVC_STATE_STREAMING; - break; + return USB_GADGET_DELAYED_STATUS; default: return -EINVAL; } - - return 0; } static void @@ -454,7 +450,6 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed) const struct uvc_descriptor_header * const *uvc_streaming_cls; const struct usb_descriptor_header * const *uvc_streaming_std; const struct usb_descriptor_header * const *src; - static struct usb_endpoint_descriptor *uvc_control_ep; struct usb_descriptor_header **dst; struct usb_descriptor_header **hdr; unsigned int control_size; @@ -468,14 +463,12 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed) uvc_control_desc = uvc->desc.ss_control; uvc_streaming_cls = uvc->desc.ss_streaming; uvc_streaming_std = uvc_ss_streaming; - uvc_control_ep = &uvc_ss_control_ep; break; case USB_SPEED_HIGH: uvc_control_desc = uvc->desc.fs_control; uvc_streaming_cls = uvc->desc.hs_streaming; uvc_streaming_std = uvc_hs_streaming; - uvc_control_ep = &uvc_fs_control_ep; break; case USB_SPEED_FULL: @@ -483,7 +476,6 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed) uvc_control_desc = uvc->desc.fs_control; uvc_streaming_cls = uvc->desc.fs_streaming; uvc_streaming_std = uvc_fs_streaming; - uvc_control_ep = &uvc_fs_control_ep; break; } @@ -494,6 +486,7 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed) * Class-specific UVC control descriptors * uvc_control_ep * uvc_control_cs_ep + * uvc_ss_control_comp (for SS only) * uvc_streaming_intf_alt0 * Class-specific UVC streaming descriptors * uvc_{fs|hs}_streaming @@ -503,7 +496,7 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed) control_size = 0; streaming_size = 0; bytes = uvc_iad.bLength + uvc_control_intf.bLength - + uvc_control_ep->bLength + uvc_control_cs_ep.bLength + + uvc_control_ep.bLength + uvc_control_cs_ep.bLength + uvc_streaming_intf_alt0.bLength; if (speed == USB_SPEED_SUPER) { @@ -514,13 +507,13 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed) } for (src = (const struct usb_descriptor_header **)uvc_control_desc; - *src; ++src) { + *src; ++src) { control_size += (*src)->bLength; bytes += (*src)->bLength; n_desc++; } for (src = (const struct usb_descriptor_header **)uvc_streaming_cls; - *src; ++src) { + *src; ++src) { streaming_size += (*src)->bLength; bytes += (*src)->bLength; n_desc++; @@ -549,7 +542,7 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed) uvc_control_header->bInCollection = 1; uvc_control_header->baInterfaceNr[0] = uvc->streaming_intf; - UVC_COPY_DESCRIPTOR(mem, dst, uvc_control_ep); + UVC_COPY_DESCRIPTOR(mem, dst, &uvc_control_ep); if (speed == USB_SPEED_SUPER) UVC_COPY_DESCRIPTOR(mem, dst, &uvc_ss_control_comp); @@ -560,8 +553,7 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed) UVC_COPY_DESCRIPTORS(mem, dst, (const struct usb_descriptor_header**)uvc_streaming_cls); uvc_streaming_header->wTotalLength = cpu_to_le16(streaming_size); - uvc_streaming_header->bEndpointAddress = - uvc_fs_streaming_ep.bEndpointAddress; + uvc_streaming_header->bEndpointAddress = uvc->video.ep->address; UVC_COPY_DESCRIPTORS(mem, dst, uvc_streaming_std); @@ -581,7 +573,7 @@ uvc_function_unbind(struct usb_configuration *c, struct usb_function *f) uvc->control_ep->driver_data = NULL; uvc->video.ep->driver_data = NULL; - uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id = 0; + uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id = 0; usb_ep_free_request(cdev->gadget->ep0, uvc->control_req); kfree(uvc->control_buf); @@ -595,31 +587,52 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f) { struct usb_composite_dev *cdev = c->cdev; struct uvc_device *uvc = to_uvc(f); + unsigned int max_packet_mult; + unsigned int max_packet_size; struct usb_ep *ep; int ret = -EINVAL; INFO(cdev, "uvc_function_bind\n"); - /* sanity check the streaming endpoint module parameters */ - if (streaming_interval < 1) - streaming_interval = 1; - if (streaming_interval > 16) - streaming_interval = 16; - if (streaming_mult > 2) - streaming_mult = 2; - if (streaming_maxburst > 15) - streaming_maxburst = 15; - - /* - * fill in the FS video streaming specific descriptors from the - * module parameters + /* Sanity check the streaming endpoint module parameters. */ - uvc_fs_streaming_ep.wMaxPacketSize = streaming_maxpacket > 1023 ? - 1023 : streaming_maxpacket; + streaming_interval = clamp(streaming_interval, 1U, 16U); + streaming_maxpacket = clamp(streaming_maxpacket, 1U, 3072U); + streaming_maxburst = min(streaming_maxburst, 15U); + + /* Fill in the FS/HS/SS Video Streaming specific descriptors from the + * module parameters. + * + * NOTE: We assume that the user knows what they are doing and won't + * give parameters that their UDC doesn't support. + */ + if (streaming_maxpacket <= 1024) { + max_packet_mult = 1; + max_packet_size = streaming_maxpacket; + } else if (streaming_maxpacket <= 2048) { + max_packet_mult = 2; + max_packet_size = streaming_maxpacket / 2; + } else { + max_packet_mult = 3; + max_packet_size = streaming_maxpacket / 3; + } + + uvc_fs_streaming_ep.wMaxPacketSize = min(streaming_maxpacket, 1023U); uvc_fs_streaming_ep.bInterval = streaming_interval; + uvc_hs_streaming_ep.wMaxPacketSize = max_packet_size; + uvc_hs_streaming_ep.wMaxPacketSize |= ((max_packet_mult - 1) << 11); + uvc_hs_streaming_ep.bInterval = streaming_interval; + + uvc_ss_streaming_ep.wMaxPacketSize = max_packet_size; + uvc_ss_streaming_ep.bInterval = streaming_interval; + uvc_ss_streaming_comp.bmAttributes = max_packet_mult - 1; + uvc_ss_streaming_comp.bMaxBurst = streaming_maxburst; + uvc_ss_streaming_comp.wBytesPerInterval = + max_packet_size * max_packet_mult * streaming_maxburst; + /* Allocate endpoints. */ - ep = usb_ep_autoconfig(cdev->gadget, &uvc_fs_control_ep); + ep = usb_ep_autoconfig(cdev->gadget, &uvc_control_ep); if (!ep) { INFO(cdev, "Unable to allocate control EP\n"); goto error; @@ -627,7 +640,14 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f) uvc->control_ep = ep; ep->driver_data = uvc; - ep = usb_ep_autoconfig(cdev->gadget, &uvc_fs_streaming_ep); + if (gadget_is_superspeed(c->cdev->gadget)) + ep = usb_ep_autoconfig_ss(cdev->gadget, &uvc_ss_streaming_ep, + &uvc_ss_streaming_comp); + else if (gadget_is_dualspeed(cdev->gadget)) + ep = usb_ep_autoconfig(cdev->gadget, &uvc_hs_streaming_ep); + else + ep = usb_ep_autoconfig(cdev->gadget, &uvc_fs_streaming_ep); + if (!ep) { INFO(cdev, "Unable to allocate streaming EP\n"); goto error; @@ -635,6 +655,10 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f) uvc->video.ep = ep; ep->driver_data = uvc; + uvc_fs_streaming_ep.bEndpointAddress = uvc->video.ep->address; + uvc_hs_streaming_ep.bEndpointAddress = uvc->video.ep->address; + uvc_ss_streaming_ep.bEndpointAddress = uvc->video.ep->address; + /* Allocate interface IDs. */ if ((ret = usb_interface_id(c, f)) < 0) goto error; @@ -648,37 +672,6 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f) uvc_streaming_intf_alt1.bInterfaceNumber = ret; uvc->streaming_intf = ret; - /* sanity check the streaming endpoint module parameters */ - if (streaming_maxpacket > 1024) - streaming_maxpacket = 1024; - /* - * Fill in the HS descriptors from the module parameters for the Video - * Streaming endpoint. - * NOTE: We assume that the user knows what they are doing and won't - * give parameters that their UDC doesn't support. - */ - uvc_hs_streaming_ep.wMaxPacketSize = streaming_maxpacket; - uvc_hs_streaming_ep.wMaxPacketSize |= streaming_mult << 11; - uvc_hs_streaming_ep.bInterval = streaming_interval; - uvc_hs_streaming_ep.bEndpointAddress = - uvc_fs_streaming_ep.bEndpointAddress; - - /* - * Fill in the SS descriptors from the module parameters for the Video - * Streaming endpoint. - * NOTE: We assume that the user knows what they are doing and won't - * give parameters that their UDC doesn't support. - */ - uvc_ss_streaming_ep.wMaxPacketSize = streaming_maxpacket; - uvc_ss_streaming_ep.bInterval = streaming_interval; - uvc_ss_streaming_comp.bmAttributes = streaming_mult; - uvc_ss_streaming_comp.bMaxBurst = streaming_maxburst; - uvc_ss_streaming_comp.wBytesPerInterval = - streaming_maxpacket * (streaming_mult + 1) * - (streaming_maxburst + 1); - uvc_ss_streaming_ep.bEndpointAddress = - uvc_fs_streaming_ep.bEndpointAddress; - /* Copy descriptors */ f->fs_descriptors = uvc_copy_descriptors(uvc, USB_SPEED_FULL); if (gadget_is_dualspeed(cdev->gadget)) @@ -775,23 +768,23 @@ uvc_bind_config(struct usb_configuration *c, /* Validate the descriptors. */ if (fs_control == NULL || fs_control[0] == NULL || - fs_control[0]->bDescriptorSubType != UVC_VC_HEADER) + fs_control[0]->bDescriptorSubType != UVC_VC_HEADER) goto error; if (ss_control == NULL || ss_control[0] == NULL || - ss_control[0]->bDescriptorSubType != UVC_VC_HEADER) + ss_control[0]->bDescriptorSubType != UVC_VC_HEADER) goto error; if (fs_streaming == NULL || fs_streaming[0] == NULL || - fs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER) + fs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER) goto error; if (hs_streaming == NULL || hs_streaming[0] == NULL || - hs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER) + hs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER) goto error; if (ss_streaming == NULL || ss_streaming[0] == NULL || - ss_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER) + ss_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER) goto error; uvc->desc.fs_control = fs_control; @@ -800,13 +793,16 @@ uvc_bind_config(struct usb_configuration *c, uvc->desc.hs_streaming = hs_streaming; uvc->desc.ss_streaming = ss_streaming; - /* Allocate string descriptor numbers. */ - if (uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id == 0) { + /* String descriptors are global, we only need to allocate string IDs + * for the first UVC function. UVC functions beyond the first (if any) + * will reuse the same IDs. + */ + if (uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id == 0) { ret = usb_string_ids_tab(c->cdev, uvc_en_us_strings); if (ret) goto error; uvc_iad.iFunction = - uvc_en_us_strings[UVC_STRING_ASSOCIATION_IDX].id; + uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id; uvc_control_intf.iInterface = uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id; ret = uvc_en_us_strings[UVC_STRING_STREAMING_IDX].id; diff --git a/drivers/usb/gadget/f_uvc.h b/drivers/usb/gadget/f_uvc.h index c3d258d30188..ec52752f7326 100644 --- a/drivers/usb/gadget/f_uvc.h +++ b/drivers/usb/gadget/f_uvc.h @@ -16,12 +16,12 @@ #include <linux/usb/composite.h> #include <linux/usb/video.h> -extern int uvc_bind_config(struct usb_configuration *c, - const struct uvc_descriptor_header * const *fs_control, - const struct uvc_descriptor_header * const *hs_control, - const struct uvc_descriptor_header * const *fs_streaming, - const struct uvc_descriptor_header * const *hs_streaming, - const struct uvc_descriptor_header * const *ss_streaming); +int uvc_bind_config(struct usb_configuration *c, + const struct uvc_descriptor_header * const *fs_control, + const struct uvc_descriptor_header * const *hs_control, + const struct uvc_descriptor_header * const *fs_streaming, + const struct uvc_descriptor_header * const *hs_streaming, + const struct uvc_descriptor_header * const *ss_streaming); #endif /* _F_UVC_H_ */ diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index 034477ce77c6..9a7ee3347e4d 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -2296,7 +2296,6 @@ static int fsl_qe_start(struct usb_gadget *gadget, driver->driver.bus = NULL; /* hook up the driver */ udc->driver = driver; - udc->gadget.dev.driver = &driver->driver; udc->gadget.speed = driver->max_speed; /* Enable IRQ reg and Set usbcmd reg EN bit */ @@ -2338,7 +2337,6 @@ static int fsl_qe_stop(struct usb_gadget *gadget, nuke(loop_ep, -ESHUTDOWN); spin_unlock_irqrestore(&udc->lock, flags); - udc->gadget.dev.driver = NULL; udc->driver = NULL; dev_info(udc->dev, "unregistered gadget driver '%s'\r\n", @@ -2523,12 +2521,6 @@ static int qe_udc_probe(struct platform_device *ofdev) /* name: Identifies the controller hardware type. */ udc->gadget.name = driver_name; - - device_initialize(&udc->gadget.dev); - - dev_set_name(&udc->gadget.dev, "gadget"); - - udc->gadget.dev.release = qe_udc_release; udc->gadget.dev.parent = &ofdev->dev; /* initialize qe_ep struct */ @@ -2592,22 +2584,17 @@ static int qe_udc_probe(struct platform_device *ofdev) goto err5; } - ret = device_add(&udc->gadget.dev); + ret = usb_add_gadget_udc_release(&ofdev->dev, &udc->gadget, + qe_udc_release); if (ret) goto err6; - ret = usb_add_gadget_udc(&ofdev->dev, &udc->gadget); - if (ret) - goto err7; - dev_set_drvdata(&ofdev->dev, udc); dev_info(udc->dev, "%s USB controller initialized as device\n", (udc->soc_type == PORT_QE) ? "QE" : "CPM"); return 0; -err7: - device_unregister(&udc->gadget.dev); err6: free_irq(udc->usb_irq, udc); err5: @@ -2702,7 +2689,6 @@ static int qe_udc_remove(struct platform_device *ofdev) iounmap(udc->usb_regs); - device_unregister(&udc->gadget.dev); /* wait for release() of gadget.dev to free udc */ wait_for_completion(&done); diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 04d5fef1440c..7c2a101d19ac 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -185,20 +185,7 @@ static void done(struct fsl_ep *ep, struct fsl_req *req, int status) dma_pool_free(udc->td_pool, curr_td, curr_td->td_dma); } - if (req->mapped) { - dma_unmap_single(ep->udc->gadget.dev.parent, - req->req.dma, req->req.length, - ep_is_in(ep) - ? DMA_TO_DEVICE - : DMA_FROM_DEVICE); - req->req.dma = DMA_ADDR_INVALID; - req->mapped = 0; - } else - dma_sync_single_for_cpu(ep->udc->gadget.dev.parent, - req->req.dma, req->req.length, - ep_is_in(ep) - ? DMA_TO_DEVICE - : DMA_FROM_DEVICE); + usb_gadget_unmap_request(&ep->udc->gadget, &req->req, ep_is_in(ep)); if (status && (status != -ESHUTDOWN)) VDBG("complete %s req %p stat %d len %u/%u", @@ -888,6 +875,7 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) struct fsl_req *req = container_of(_req, struct fsl_req, req); struct fsl_udc *udc; unsigned long flags; + int ret; /* catch various bogus parameters */ if (!_req || !req->req.complete || !req->req.buf @@ -910,22 +898,9 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) req->ep = ep; - /* map virtual address to hardware */ - if (req->req.dma == DMA_ADDR_INVALID) { - req->req.dma = dma_map_single(ep->udc->gadget.dev.parent, - req->req.buf, - req->req.length, ep_is_in(ep) - ? DMA_TO_DEVICE - : DMA_FROM_DEVICE); - req->mapped = 1; - } else { - dma_sync_single_for_device(ep->udc->gadget.dev.parent, - req->req.dma, req->req.length, - ep_is_in(ep) - ? DMA_TO_DEVICE - : DMA_FROM_DEVICE); - req->mapped = 0; - } + ret = usb_gadget_map_request(&ep->udc->gadget, &req->req, ep_is_in(ep)); + if (ret) + return ret; req->req.status = -EINPROGRESS; req->req.actual = 0; @@ -1290,6 +1265,7 @@ static int ep0_prime_status(struct fsl_udc *udc, int direction) { struct fsl_req *req = udc->status_req; struct fsl_ep *ep; + int ret; if (direction == EP_DIR_IN) udc->ep0_dir = USB_DIR_IN; @@ -1307,10 +1283,9 @@ static int ep0_prime_status(struct fsl_udc *udc, int direction) req->req.complete = NULL; req->dtd_count = 0; - req->req.dma = dma_map_single(ep->udc->gadget.dev.parent, - req->req.buf, req->req.length, - ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - req->mapped = 1; + ret = usb_gadget_map_request(&ep->udc->gadget, &req->req, ep_is_in(ep)); + if (ret) + return ret; if (fsl_req_to_dtd(req, GFP_ATOMIC) == 0) fsl_queue_td(ep, req); @@ -1353,6 +1328,7 @@ static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value, u16 tmp = 0; /* Status, cpu endian */ struct fsl_req *req; struct fsl_ep *ep; + int ret; ep = &udc->eps[0]; @@ -1390,10 +1366,9 @@ static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value, req->req.complete = NULL; req->dtd_count = 0; - req->req.dma = dma_map_single(ep->udc->gadget.dev.parent, - req->req.buf, req->req.length, - ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - req->mapped = 1; + ret = usb_gadget_map_request(&ep->udc->gadget, &req->req, ep_is_in(ep)); + if (ret) + goto stall; /* prime the data phase */ if ((fsl_req_to_dtd(req, GFP_ATOMIC) == 0)) @@ -1964,7 +1939,6 @@ static int fsl_udc_start(struct usb_gadget *g, driver->driver.bus = NULL; /* hook up the driver */ udc_controller->driver = driver; - udc_controller->gadget.dev.driver = &driver->driver; spin_unlock_irqrestore(&udc_controller->lock, flags); if (!IS_ERR_OR_NULL(udc_controller->transceiver)) { @@ -1980,7 +1954,6 @@ static int fsl_udc_start(struct usb_gadget *g, if (retval < 0) { ERR("can't bind to transceiver\n"); driver->unbind(&udc_controller->gadget); - udc_controller->gadget.dev.driver = 0; udc_controller->driver = 0; return retval; } @@ -2023,7 +1996,6 @@ static int fsl_udc_stop(struct usb_gadget *g, nuke(loop_ep, -ESHUTDOWN); spin_unlock_irqrestore(&udc_controller->lock, flags); - udc_controller->gadget.dev.driver = NULL; udc_controller->driver = NULL; return 0; @@ -2521,12 +2493,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev) /* Setup gadget.dev and register with kernel */ dev_set_name(&udc_controller->gadget.dev, "gadget"); - udc_controller->gadget.dev.release = fsl_udc_release; - udc_controller->gadget.dev.parent = &pdev->dev; udc_controller->gadget.dev.of_node = pdev->dev.of_node; - ret = device_register(&udc_controller->gadget.dev); - if (ret < 0) - goto err_free_irq; if (!IS_ERR_OR_NULL(udc_controller->transceiver)) udc_controller->gadget.is_otg = 1; @@ -2559,10 +2526,11 @@ static int __init fsl_udc_probe(struct platform_device *pdev) DTD_ALIGNMENT, UDC_DMA_BOUNDARY); if (udc_controller->td_pool == NULL) { ret = -ENOMEM; - goto err_unregister; + goto err_free_irq; } - ret = usb_add_gadget_udc(&pdev->dev, &udc_controller->gadget); + ret = usb_add_gadget_udc_release(&pdev->dev, &udc_controller->gadget, + fsl_udc_release); if (ret) goto err_del_udc; @@ -2571,8 +2539,6 @@ static int __init fsl_udc_probe(struct platform_device *pdev) err_del_udc: dma_pool_destroy(udc_controller->td_pool); -err_unregister: - device_unregister(&udc_controller->gadget.dev); err_free_irq: free_irq(udc_controller->irq, udc_controller); err_iounmap: @@ -2622,7 +2588,6 @@ static int __exit fsl_udc_remove(struct platform_device *pdev) if (pdata->operating_mode == FSL_USB2_DR_DEVICE) release_mem_region(res->start, resource_size(res)); - device_unregister(&udc_controller->gadget.dev); /* free udc --wait for the release() finished */ wait_for_completion(&done); @@ -2747,21 +2712,7 @@ static struct platform_driver udc_driver = { }, }; -static int __init udc_init(void) -{ - printk(KERN_INFO "%s (%s)\n", driver_desc, DRIVER_VERSION); - return platform_driver_probe(&udc_driver, fsl_udc_probe); -} - -module_init(udc_init); - -static void __exit udc_exit(void) -{ - platform_driver_unregister(&udc_driver); - printk(KERN_WARNING "%s unregistered\n", driver_desc); -} - -module_exit(udc_exit); +module_platform_driver_probe(udc_driver, fsl_udc_probe); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR(DRIVER_AUTHOR); diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c index 066cb89376de..cec8871b77f9 100644 --- a/drivers/usb/gadget/fusb300_udc.c +++ b/drivers/usb/gadget/fusb300_udc.c @@ -394,7 +394,7 @@ static void fusb300_clear_epnstall(struct fusb300 *fusb300, u8 ep) if (reg & FUSB300_EPSET0_STL) { printk(KERN_DEBUG "EP%d stall... Clear!!\n", ep); - reg &= ~FUSB300_EPSET0_STL; + reg |= FUSB300_EPSET0_STL_CLR; iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET0(ep)); } } @@ -930,33 +930,33 @@ static void fusb300_wait_idma_finished(struct fusb300_ep *ep) fusb300_clear_int(ep->fusb300, FUSB300_OFFSET_IGR0, FUSB300_IGR0_EPn_PRD_INT(ep->epnum)); + return; + IDMA_RESET: - fusb300_clear_int(ep->fusb300, FUSB300_OFFSET_IGER0, - FUSB300_IGER0_EEPn_PRD_INT(ep->epnum)); + reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_IGER0); + reg &= ~FUSB300_IGER0_EEPn_PRD_INT(ep->epnum); + iowrite32(reg, ep->fusb300->reg + FUSB300_OFFSET_IGER0); } -static void fusb300_set_idma(struct fusb300_ep *ep, +static void fusb300_set_idma(struct fusb300_ep *ep, struct fusb300_request *req) { - dma_addr_t d; - - d = dma_map_single(NULL, req->req.buf, req->req.length, DMA_TO_DEVICE); + int ret; - if (dma_mapping_error(NULL, d)) { - printk(KERN_DEBUG "dma_mapping_error\n"); + ret = usb_gadget_map_request(&ep->fusb300->gadget, + &req->req, DMA_TO_DEVICE); + if (ret) return; - } - - dma_sync_single_for_device(NULL, d, req->req.length, DMA_TO_DEVICE); fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_IGER0, FUSB300_IGER0_EEPn_PRD_INT(ep->epnum)); - fusb300_fill_idma_prdtbl(ep, d, req->req.length); + fusb300_fill_idma_prdtbl(ep, req->req.dma, req->req.length); /* check idma is done */ fusb300_wait_idma_finished(ep); - dma_unmap_single(NULL, d, req->req.length, DMA_TO_DEVICE); + usb_gadget_unmap_request(&ep->fusb300->gadget, + &req->req, DMA_TO_DEVICE); } static void in_ep_fifo_handler(struct fusb300_ep *ep) @@ -1316,7 +1316,6 @@ static int fusb300_udc_start(struct usb_gadget *g, /* hook up the driver */ driver->driver.bus = NULL; fusb300->driver = driver; - fusb300->gadget.dev.driver = &driver->driver; return 0; } @@ -1327,7 +1326,6 @@ static int fusb300_udc_stop(struct usb_gadget *g, struct fusb300 *fusb300 = to_fusb300(g); driver->unbind(&fusb300->gadget); - fusb300->gadget.dev.driver = NULL; init_controller(fusb300); fusb300->driver = NULL; @@ -1422,14 +1420,7 @@ static int __init fusb300_probe(struct platform_device *pdev) fusb300->gadget.ops = &fusb300_gadget_ops; - device_initialize(&fusb300->gadget.dev); - - dev_set_name(&fusb300->gadget.dev, "gadget"); - fusb300->gadget.max_speed = USB_SPEED_HIGH; - fusb300->gadget.dev.parent = &pdev->dev; - fusb300->gadget.dev.dma_mask = pdev->dev.dma_mask; - fusb300->gadget.dev.release = pdev->dev.release; fusb300->gadget.name = udc_name; fusb300->reg = reg; @@ -1478,19 +1469,10 @@ static int __init fusb300_probe(struct platform_device *pdev) if (ret) goto err_add_udc; - ret = device_add(&fusb300->gadget.dev); - if (ret) { - pr_err("device_add error (%d)\n", ret); - goto err_add_device; - } - dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION); return 0; -err_add_device: - usb_del_gadget_udc(&fusb300->gadget); - err_add_udc: fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req); diff --git a/drivers/usb/gadget/fusb300_udc.h b/drivers/usb/gadget/fusb300_udc.h index 6ba444ae8dd5..ae811d8d38b4 100644 --- a/drivers/usb/gadget/fusb300_udc.h +++ b/drivers/usb/gadget/fusb300_udc.h @@ -111,8 +111,8 @@ /* * * EPn Setting 0 (EPn_SET0, offset = 020H+(n-1)*30H, n=1~15 ) * */ +#define FUSB300_EPSET0_STL_CLR (1 << 3) #define FUSB300_EPSET0_CLRSEQNUM (1 << 2) -#define FUSB300_EPSET0_EPn_TX0BYTE (1 << 1) #define FUSB300_EPSET0_STL (1 << 0) /* diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c index 3b343b23e4b0..787a78e92aa2 100644 --- a/drivers/usb/gadget/g_ffs.c +++ b/drivers/usb/gadget/g_ffs.c @@ -13,7 +13,6 @@ #define pr_fmt(fmt) "g_ffs: " fmt #include <linux/module.h> - /* * kbuild is not very cooperative with respect to linking separately * compiled library objects into one module. So for now we won't use @@ -38,13 +37,16 @@ # include "u_ether.c" static u8 gfs_hostaddr[ETH_ALEN]; +static struct eth_dev *the_dev; # ifdef CONFIG_USB_FUNCTIONFS_ETH -static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]); +static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], + struct eth_dev *dev); # endif #else -# define gether_cleanup() do { } while (0) -# define gether_setup(gadget, hostaddr) ((int)0) +# define the_dev NULL +# define gether_cleanup(dev) do { } while (0) # define gfs_hostaddr NULL +struct eth_dev; #endif #include "f_fs.c" @@ -137,7 +139,8 @@ static struct usb_gadget_strings *gfs_dev_strings[] = { struct gfs_configuration { struct usb_configuration c; - int (*eth)(struct usb_configuration *c, u8 *ethaddr); + int (*eth)(struct usb_configuration *c, u8 *ethaddr, + struct eth_dev *dev); } gfs_configurations[] = { #ifdef CONFIG_USB_FUNCTIONFS_RNDIS { @@ -346,10 +349,13 @@ static int gfs_bind(struct usb_composite_dev *cdev) if (missing_funcs) return -ENODEV; - - ret = gether_setup(cdev->gadget, gfs_hostaddr); - if (unlikely(ret < 0)) +#if defined CONFIG_USB_FUNCTIONFS_ETH || defined CONFIG_USB_FUNCTIONFS_RNDIS + the_dev = gether_setup(cdev->gadget, gfs_hostaddr); +#endif + if (IS_ERR(the_dev)) { + ret = PTR_ERR(the_dev); goto error_quick; + } gfs_ether_setup = true; ret = usb_string_ids_tab(cdev, gfs_strings); @@ -386,7 +392,7 @@ error_unbind: for (i = 0; i < func_num; i++) functionfs_unbind(ffs_tab[i].ffs_data); error: - gether_cleanup(); + gether_cleanup(the_dev); error_quick: gfs_ether_setup = false; return ret; @@ -410,7 +416,7 @@ static int gfs_unbind(struct usb_composite_dev *cdev) * do...? */ if (gfs_ether_setup) - gether_cleanup(); + gether_cleanup(the_dev); gfs_ether_setup = false; for (i = func_num; i--; ) @@ -440,7 +446,7 @@ static int gfs_do_config(struct usb_configuration *c) } if (gc->eth) { - ret = gc->eth(c, gfs_hostaddr); + ret = gc->eth(c, gfs_hostaddr, the_dev); if (unlikely(ret < 0)) return ret; } @@ -469,11 +475,12 @@ static int gfs_do_config(struct usb_configuration *c) #ifdef CONFIG_USB_FUNCTIONFS_ETH -static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) +static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], + struct eth_dev *dev) { return can_support_ecm(c->cdev->gadget) - ? ecm_bind_config(c, ethaddr) - : geth_bind_config(c, ethaddr); + ? ecm_bind_config(c, ethaddr, dev) + : geth_bind_config(c, ethaddr, dev); } #endif diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index 85742d4c67df..991aba390d9d 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -51,8 +51,6 @@ #define DRIVER_DESC "TC86C001 USB Device Controller" #define DRIVER_VERSION "30-Oct 2003" -#define DMA_ADDR_INVALID (~(dma_addr_t)0) - static const char driver_name [] = "goku_udc"; static const char driver_desc [] = DRIVER_DESC; @@ -275,7 +273,6 @@ goku_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) if (!req) return NULL; - req->req.dma = DMA_ADDR_INVALID; INIT_LIST_HEAD(&req->queue); return &req->req; } @@ -1354,7 +1351,6 @@ static int goku_udc_start(struct usb_gadget *g, /* hook up the driver */ driver->driver.bus = NULL; dev->driver = driver; - dev->gadget.dev.driver = &driver->driver; /* * then enable host detection and ep0; and we're ready @@ -1394,7 +1390,6 @@ static int goku_udc_stop(struct usb_gadget *g, dev->driver = NULL; stop_activity(dev, driver); spin_unlock_irqrestore(&dev->lock, flags); - dev->gadget.dev.driver = NULL; return 0; } @@ -1716,8 +1711,6 @@ static void goku_remove(struct pci_dev *pdev) pci_resource_len (pdev, 0)); if (dev->enabled) pci_disable_device(pdev); - if (dev->registered) - device_unregister(&dev->gadget.dev); pci_set_drvdata(pdev, NULL); dev->regs = NULL; @@ -1756,10 +1749,6 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id) dev->gadget.max_speed = USB_SPEED_FULL; /* the "gadget" abstracts/virtualizes the controller */ - dev_set_name(&dev->gadget.dev, "gadget"); - dev->gadget.dev.parent = &pdev->dev; - dev->gadget.dev.dma_mask = pdev->dev.dma_mask; - dev->gadget.dev.release = gadget_release; dev->gadget.name = driver_name; /* now all the pci goodies ... */ @@ -1810,13 +1799,8 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id) create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev); #endif - retval = device_register(&dev->gadget.dev); - if (retval) { - put_device(&dev->gadget.dev); - goto err; - } - dev->registered = 1; - retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget); + retval = usb_add_gadget_udc_release(&pdev->dev, &dev->gadget, + gadget_release); if (retval) goto err; diff --git a/drivers/usb/gadget/goku_udc.h b/drivers/usb/gadget/goku_udc.h index b4470d2b1d86..86d2adafe149 100644 --- a/drivers/usb/gadget/goku_udc.h +++ b/drivers/usb/gadget/goku_udc.h @@ -250,8 +250,7 @@ struct goku_udc { got_region:1, req_config:1, configured:1, - enabled:1, - registered:1; + enabled:1; /* pci state used to access those endpoints */ struct pci_dev *pdev; diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index 5bd930d779b9..b5cebd6b0d7a 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -1338,7 +1338,6 @@ static int imx_udc_start(struct usb_gadget *gadget, imx_usb = container_of(gadget, struct imx_udc_struct, gadget); /* first hook up the driver ... */ imx_usb->driver = driver; - imx_usb->gadget.dev.driver = &driver->driver; D_INI(imx_usb->dev, "<%s> registered gadget driver '%s'\n", __func__, driver->driver.name); @@ -1358,7 +1357,6 @@ static int imx_udc_stop(struct usb_gadget *gadget, imx_udc_disable(imx_usb); del_timer(&imx_usb->timer); - imx_usb->gadget.dev.driver = NULL; imx_usb->driver = NULL; D_INI(imx_usb->dev, "<%s> unregistered gadget driver '%s'\n", @@ -1461,15 +1459,6 @@ static int __init imx_udc_probe(struct platform_device *pdev) imx_usb->clk = clk; imx_usb->dev = &pdev->dev; - device_initialize(&imx_usb->gadget.dev); - - imx_usb->gadget.dev.parent = &pdev->dev; - imx_usb->gadget.dev.dma_mask = pdev->dev.dma_mask; - - ret = device_add(&imx_usb->gadget.dev); - if (retval) - goto fail4; - platform_set_drvdata(pdev, imx_usb); usb_init_data(imx_usb); @@ -1481,11 +1470,9 @@ static int __init imx_udc_probe(struct platform_device *pdev) ret = usb_add_gadget_udc(&pdev->dev, &imx_usb->gadget); if (ret) - goto fail5; + goto fail4; return 0; -fail5: - device_unregister(&imx_usb->gadget.dev); fail4: for (i = 0; i < IMX_USB_NB_EP + 1; i++) free_irq(imx_usb->usbd_int[i], imx_usb); @@ -1509,7 +1496,6 @@ static int __exit imx_udc_remove(struct platform_device *pdev) int i; usb_del_gadget_udc(&imx_usb->gadget); - device_unregister(&imx_usb->gadget.dev); imx_udc_disable(imx_usb); del_timer(&imx_usb->timer); diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c index aa04089d6899..b943d8cdfbf7 100644 --- a/drivers/usb/gadget/lpc32xx_udc.c +++ b/drivers/usb/gadget/lpc32xx_udc.c @@ -1469,23 +1469,7 @@ static void done(struct lpc32xx_ep *ep, struct lpc32xx_request *req, int status) status = req->req.status; if (ep->lep) { - enum dma_data_direction direction; - - if (ep->is_in) - direction = DMA_TO_DEVICE; - else - direction = DMA_FROM_DEVICE; - - if (req->mapped) { - dma_unmap_single(ep->udc->gadget.dev.parent, - req->req.dma, req->req.length, - direction); - req->req.dma = 0; - req->mapped = 0; - } else - dma_sync_single_for_cpu(ep->udc->gadget.dev.parent, - req->req.dma, req->req.length, - direction); + usb_gadget_unmap_request(&udc->gadget, &req->req, ep->is_in); /* Free DDs */ udc_dd_free(udc, req->dd_desc_ptr); @@ -1841,26 +1825,11 @@ static int lpc32xx_ep_queue(struct usb_ep *_ep, } if (ep->lep) { - enum dma_data_direction direction; struct lpc32xx_usbd_dd_gad *dd; - /* Map DMA pointer */ - if (ep->is_in) - direction = DMA_TO_DEVICE; - else - direction = DMA_FROM_DEVICE; - - if (req->req.dma == 0) { - req->req.dma = dma_map_single( - ep->udc->gadget.dev.parent, - req->req.buf, req->req.length, direction); - req->mapped = 1; - } else { - dma_sync_single_for_device( - ep->udc->gadget.dev.parent, req->req.dma, - req->req.length, direction); - req->mapped = 0; - } + status = usb_gadget_map_request(&udc->gadget, _req, ep->is_in); + if (status) + return status; /* For the request, build a list of DDs */ dd = udc_dd_alloc(udc); @@ -2977,7 +2946,6 @@ static int lpc32xx_start(struct usb_gadget *gadget, } udc->driver = driver; - udc->gadget.dev.driver = &driver->driver; udc->gadget.dev.of_node = udc->dev->of_node; udc->enabled = 1; udc->selfpowered = 1; @@ -3026,7 +2994,6 @@ static int lpc32xx_stop(struct usb_gadget *gadget, } udc->enabled = 0; - udc->gadget.dev.driver = NULL; udc->driver = NULL; return 0; @@ -3248,12 +3215,6 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev) udc_disable(udc); udc_reinit(udc); - retval = device_register(&udc->gadget.dev); - if (retval < 0) { - dev_err(udc->dev, "Device registration failure\n"); - goto dev_register_fail; - } - /* Request IRQs - low and high priority USB device IRQs are routed to * the same handler, while the DMA interrupt is routed elsewhere */ retval = request_irq(udc->udp_irq[IRQ_USB_LP], lpc32xx_usb_lp_irq, @@ -3320,8 +3281,6 @@ irq_dev_fail: irq_hp_fail: free_irq(udc->udp_irq[IRQ_USB_LP], udc); irq_lp_fail: - device_unregister(&udc->gadget.dev); -dev_register_fail: dma_pool_destroy(udc->dd_cache); dma_alloc_fail: dma_free_coherent(&pdev->dev, UDCA_BUFF_SIZE, @@ -3376,8 +3335,6 @@ static int lpc32xx_udc_remove(struct platform_device *pdev) free_irq(udc->udp_irq[IRQ_USB_HP], udc); free_irq(udc->udp_irq[IRQ_USB_LP], udc); - device_unregister(&udc->gadget.dev); - clk_disable(udc->usb_otg_clk); clk_put(udc->usb_otg_clk); clk_disable(udc->usb_slv_clk); diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index c1b8c2dd808d..866ef0999247 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -1471,7 +1471,6 @@ static int m66592_udc_start(struct usb_gadget *g, /* hook up the driver */ driver->driver.bus = NULL; m66592->driver = driver; - m66592->gadget.dev.driver = &driver->driver; m66592_bset(m66592, M66592_VBSE | M66592_URST, M66592_INTENB0); if (m66592_read(m66592, M66592_INTSTS0) & M66592_VBSTS) { @@ -1494,7 +1493,6 @@ static int m66592_udc_stop(struct usb_gadget *g, m66592_bclr(m66592, M66592_VBSE | M66592_URST, M66592_INTENB0); driver->unbind(&m66592->gadget); - m66592->gadget.dev.driver = NULL; init_controller(m66592); disable_controller(m66592); @@ -1538,7 +1536,6 @@ static int __exit m66592_remove(struct platform_device *pdev) struct m66592 *m66592 = dev_get_drvdata(&pdev->dev); usb_del_gadget_udc(&m66592->gadget); - device_del(&m66592->gadget.dev); del_timer_sync(&m66592->timer); iounmap(m66592->reg); @@ -1608,12 +1605,7 @@ static int __init m66592_probe(struct platform_device *pdev) dev_set_drvdata(&pdev->dev, m66592); m66592->gadget.ops = &m66592_gadget_ops; - device_initialize(&m66592->gadget.dev); - dev_set_name(&m66592->gadget.dev, "gadget"); m66592->gadget.max_speed = USB_SPEED_HIGH; - m66592->gadget.dev.parent = &pdev->dev; - m66592->gadget.dev.dma_mask = pdev->dev.dma_mask; - m66592->gadget.dev.release = pdev->dev.release; m66592->gadget.name = udc_name; init_timer(&m66592->timer); @@ -1674,12 +1666,6 @@ static int __init m66592_probe(struct platform_device *pdev) init_controller(m66592); - ret = device_add(&m66592->gadget.dev); - if (ret) { - pr_err("device_add error (%d)\n", ret); - goto err_device_add; - } - ret = usb_add_gadget_udc(&pdev->dev, &m66592->gadget); if (ret) goto err_add_udc; @@ -1688,9 +1674,6 @@ static int __init m66592_probe(struct platform_device *pdev) return 0; err_add_udc: - device_del(&m66592->gadget.dev); - -err_device_add: m66592_free_request(&m66592->ep[0].ep, m66592->ep0_req); clean_up3: diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c index 20bbbf917fc2..4a45e80c6e38 100644 --- a/drivers/usb/gadget/multi.c +++ b/drivers/usb/gadget/multi.c @@ -135,8 +135,8 @@ static struct fsg_common fsg_common; static u8 hostaddr[ETH_ALEN]; -static unsigned char tty_line; static struct usb_function_instance *fi_acm; +static struct eth_dev *the_dev; /********** RNDIS **********/ @@ -152,13 +152,15 @@ static __init int rndis_do_config(struct usb_configuration *c) c->bmAttributes |= USB_CONFIG_ATT_WAKEUP; } - ret = rndis_bind_config(c, hostaddr); + ret = rndis_bind_config(c, hostaddr, the_dev); if (ret < 0) return ret; f_acm_rndis = usb_get_function(fi_acm); - if (IS_ERR(f_acm_rndis)) + if (IS_ERR(f_acm_rndis)) { + ret = PTR_ERR(f_acm_rndis); goto err_func_acm; + } ret = usb_add_function(c, f_acm_rndis); if (ret) @@ -214,7 +216,7 @@ static __init int cdc_do_config(struct usb_configuration *c) c->bmAttributes |= USB_CONFIG_ATT_WAKEUP; } - ret = ecm_bind_config(c, hostaddr); + ret = ecm_bind_config(c, hostaddr, the_dev); if (ret < 0) return ret; @@ -269,7 +271,6 @@ static int cdc_config_register(struct usb_composite_dev *cdev) static int __ref multi_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; - struct f_serial_opts *opts; int status; if (!can_support_ecm(cdev->gadget)) { @@ -279,24 +280,17 @@ static int __ref multi_bind(struct usb_composite_dev *cdev) } /* set up network link layer */ - status = gether_setup(cdev->gadget, hostaddr); - if (status < 0) - return status; + the_dev = gether_setup(cdev->gadget, hostaddr); + if (IS_ERR(the_dev)) + return PTR_ERR(the_dev); /* set up serial link layer */ - status = gserial_alloc_line(&tty_line); - if (status < 0) - goto fail0; - fi_acm = usb_get_function_instance("acm"); if (IS_ERR(fi_acm)) { status = PTR_ERR(fi_acm); - goto fail0dot5; + goto fail0; } - opts = container_of(fi_acm, struct f_serial_opts, func_inst); - opts->port_num = tty_line; - /* set up mass storage function */ { void *retp; @@ -334,10 +328,8 @@ fail2: fsg_common_put(&fsg_common); fail1: usb_put_function_instance(fi_acm); -fail0dot5: - gserial_free_line(tty_line); fail0: - gether_cleanup(); + gether_cleanup(the_dev); return status; } @@ -350,8 +342,7 @@ static int __exit multi_unbind(struct usb_composite_dev *cdev) usb_put_function(f_acm_rndis); #endif usb_put_function_instance(fi_acm); - gserial_free_line(tty_line); - gether_cleanup(); + gether_cleanup(the_dev); return 0; } diff --git a/drivers/usb/gadget/mv_u3d_core.c b/drivers/usb/gadget/mv_u3d_core.c index b5cea273c957..58288e9cf728 100644 --- a/drivers/usb/gadget/mv_u3d_core.c +++ b/drivers/usb/gadget/mv_u3d_core.c @@ -30,9 +30,6 @@ #include <linux/platform_device.h> #include <linux/platform_data/mv_usb.h> #include <linux/clk.h> -#include <asm/system.h> -#include <asm/unaligned.h> -#include <asm/byteorder.h> #include "mv_u3d.h" @@ -125,7 +122,7 @@ static int mv_u3d_process_ep_req(struct mv_u3d *u3d, int index, struct mv_u3d_trb *curr_trb; dma_addr_t cur_deq_lo; struct mv_u3d_ep_context *curr_ep_context; - int trb_complete, actual, remaining_length; + int trb_complete, actual, remaining_length = 0; int direction, ep_num; int retval = 0; u32 tmp, status, length; @@ -189,6 +186,8 @@ static int mv_u3d_process_ep_req(struct mv_u3d *u3d, int index, */ static void mv_u3d_done(struct mv_u3d_ep *ep, struct mv_u3d_req *req, int status) + __releases(&ep->udc->lock) + __acquires(&ep->udc->lock) { struct mv_u3d *u3d = (struct mv_u3d *)ep->u3d; @@ -812,19 +811,19 @@ mv_u3d_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) return 0; } - dev_dbg(u3d->dev, "%s: %s, req: 0x%x\n", - __func__, _ep->name, (u32)req); + dev_dbg(u3d->dev, "%s: %s, req: 0x%p\n", + __func__, _ep->name, req); /* catch various bogus parameters */ if (!req->req.complete || !req->req.buf || !list_empty(&req->queue)) { dev_err(u3d->dev, - "%s, bad params, _req: 0x%x," - "req->req.complete: 0x%x, req->req.buf: 0x%x," + "%s, bad params, _req: 0x%p," + "req->req.complete: 0x%p, req->req.buf: 0x%p," "list_empty: 0x%x\n", - __func__, (u32)_req, - (u32)req->req.complete, (u32)req->req.buf, - (u32)list_empty(&req->queue)); + __func__, _req, + req->req.complete, req->req.buf, + list_empty(&req->queue)); return -EINVAL; } if (unlikely(!ep->ep.desc)) { @@ -905,7 +904,7 @@ static int mv_u3d_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) struct mv_u3d_req, queue); /* Point first TRB of next request to the EP context. */ - iowrite32((u32) next_req->trb_head, + iowrite32((unsigned long) next_req->trb_head, &ep_context->trb_addr_lo); } else { struct mv_u3d_ep_context *ep_context; @@ -1264,7 +1263,6 @@ static int mv_u3d_start(struct usb_gadget *g, /* hook up the driver ... */ driver->driver.bus = NULL; u3d->driver = driver; - u3d->gadget.dev.driver = &driver->driver; u3d->ep0_dir = USB_DIR_OUT; @@ -1302,7 +1300,6 @@ static int mv_u3d_stop(struct usb_gadget *g, spin_unlock_irqrestore(&u3d->lock, flags); - u3d->gadget.dev.driver = NULL; u3d->driver = NULL; return 0; @@ -1525,6 +1522,8 @@ static int mv_u3d_is_set_configuration(struct usb_ctrlrequest *setup) static void mv_u3d_handle_setup_packet(struct mv_u3d *u3d, u8 ep_num, struct usb_ctrlrequest *setup) + __releases(&u3c->lock) + __acquires(&u3c->lock) { bool delegate = false; @@ -1758,11 +1757,6 @@ static irqreturn_t mv_u3d_irq(int irq, void *dev) return IRQ_HANDLED; } -static void mv_u3d_gadget_release(struct device *dev) -{ - dev_dbg(dev, "%s\n", __func__); -} - static int mv_u3d_remove(struct platform_device *dev) { struct mv_u3d *u3d = platform_get_drvdata(dev); @@ -1792,8 +1786,6 @@ static int mv_u3d_remove(struct platform_device *dev) clk_put(u3d->clk); - device_unregister(&u3d->gadget.dev); - platform_set_drvdata(dev, NULL); kfree(u3d); @@ -1829,7 +1821,7 @@ static int mv_u3d_probe(struct platform_device *dev) u3d->dev = &dev->dev; u3d->vbus = pdata->vbus; - u3d->clk = clk_get(&dev->dev, pdata->clkname[0]); + u3d->clk = clk_get(&dev->dev, NULL); if (IS_ERR(u3d->clk)) { retval = PTR_ERR(u3d->clk); goto err_get_clk; @@ -1849,8 +1841,9 @@ static int mv_u3d_probe(struct platform_device *dev) retval = -EBUSY; goto err_map_cap_regs; } else { - dev_dbg(&dev->dev, "cap_regs address: 0x%x/0x%x\n", - (unsigned int)r->start, (unsigned int)u3d->cap_regs); + dev_dbg(&dev->dev, "cap_regs address: 0x%lx/0x%lx\n", + (unsigned long) r->start, + (unsigned long) u3d->cap_regs); } /* we will access controller register, so enable the u3d controller */ @@ -1864,10 +1857,10 @@ static int mv_u3d_probe(struct platform_device *dev) } } - u3d->op_regs = (struct mv_u3d_op_regs __iomem *)((u32)u3d->cap_regs + u3d->op_regs = (struct mv_u3d_op_regs __iomem *)(u3d->cap_regs + MV_U3D_USB3_OP_REGS_OFFSET); - u3d->vuc_regs = (struct mv_u3d_vuc_regs __iomem *)((u32)u3d->cap_regs + u3d->vuc_regs = (struct mv_u3d_vuc_regs __iomem *)(u3d->cap_regs + ioread32(&u3d->cap_regs->vuoff)); u3d->max_eps = 16; @@ -1957,16 +1950,8 @@ static int mv_u3d_probe(struct platform_device *dev) u3d->gadget.speed = USB_SPEED_UNKNOWN; /* speed */ /* the "gadget" abstracts/virtualizes the controller */ - dev_set_name(&u3d->gadget.dev, "gadget"); - u3d->gadget.dev.parent = &dev->dev; - u3d->gadget.dev.dma_mask = dev->dev.dma_mask; - u3d->gadget.dev.release = mv_u3d_gadget_release; u3d->gadget.name = driver_name; /* gadget name */ - retval = device_register(&u3d->gadget.dev); - if (retval) - goto err_register_gadget_device; - mv_u3d_eps_init(u3d); /* external vbus detection */ @@ -1991,8 +1976,6 @@ static int mv_u3d_probe(struct platform_device *dev) return 0; err_unregister: - device_unregister(&u3d->gadget.dev); -err_register_gadget_device: free_irq(u3d->irq, &dev->dev); err_request_irq: err_get_irq: @@ -2021,7 +2004,7 @@ err_pdata: return retval; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int mv_u3d_suspend(struct device *dev) { struct mv_u3d *u3d = dev_get_drvdata(dev); @@ -2064,10 +2047,10 @@ static int mv_u3d_resume(struct device *dev) return 0; } - -SIMPLE_DEV_PM_OPS(mv_u3d_pm_ops, mv_u3d_suspend, mv_u3d_resume); #endif +static SIMPLE_DEV_PM_OPS(mv_u3d_pm_ops, mv_u3d_suspend, mv_u3d_resume); + static void mv_u3d_shutdown(struct platform_device *dev) { struct mv_u3d *u3d = dev_get_drvdata(&dev->dev); @@ -2080,14 +2063,12 @@ static void mv_u3d_shutdown(struct platform_device *dev) static struct platform_driver mv_u3d_driver = { .probe = mv_u3d_probe, - .remove = __exit_p(mv_u3d_remove), + .remove = mv_u3d_remove, .shutdown = mv_u3d_shutdown, .driver = { .owner = THIS_MODULE, .name = "mv-u3d", -#ifdef CONFIG_PM .pm = &mv_u3d_pm_ops, -#endif }, }; diff --git a/drivers/usb/gadget/mv_udc.h b/drivers/usb/gadget/mv_udc.h index 9073436d8b24..be77f207dbaf 100644 --- a/drivers/usb/gadget/mv_udc.h +++ b/drivers/usb/gadget/mv_udc.h @@ -222,8 +222,7 @@ struct mv_udc { struct mv_usb_platform_data *pdata; /* some SOC has mutiple clock sources for USB*/ - unsigned int clknum; - struct clk *clk[0]; + struct clk *clk; }; /* endpoint data structure */ diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c index c8cf959057fe..c2a57023e467 100644 --- a/drivers/usb/gadget/mv_udc_core.c +++ b/drivers/usb/gadget/mv_udc_core.c @@ -212,6 +212,8 @@ static int process_ep_req(struct mv_udc *udc, int index, * request is still in progress. */ static void done(struct mv_ep *ep, struct mv_req *req, int status) + __releases(&ep->udc->lock) + __acquires(&ep->udc->lock) { struct mv_udc *udc = NULL; unsigned char stopped = ep->stopped; @@ -237,18 +239,7 @@ static void done(struct mv_ep *ep, struct mv_req *req, int status) dma_pool_free(udc->dtd_pool, curr_td, curr_td->td_dma); } - if (req->mapped) { - dma_unmap_single(ep->udc->gadget.dev.parent, - req->req.dma, req->req.length, - ((ep_dir(ep) == EP_DIR_IN) ? - DMA_TO_DEVICE : DMA_FROM_DEVICE)); - req->req.dma = DMA_ADDR_INVALID; - req->mapped = 0; - } else - dma_sync_single_for_cpu(ep->udc->gadget.dev.parent, - req->req.dma, req->req.length, - ((ep_dir(ep) == EP_DIR_IN) ? - DMA_TO_DEVICE : DMA_FROM_DEVICE)); + usb_gadget_unmap_request(&udc->gadget, &req->req, ep_dir(ep)); if (status && (status != -ESHUTDOWN)) dev_info(&udc->dev->dev, "complete %s req %p stat %d len %u/%u", @@ -732,21 +723,9 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) req->ep = ep; /* map virtual address to hardware */ - if (req->req.dma == DMA_ADDR_INVALID) { - req->req.dma = dma_map_single(ep->udc->gadget.dev.parent, - req->req.buf, - req->req.length, ep_dir(ep) - ? DMA_TO_DEVICE - : DMA_FROM_DEVICE); - req->mapped = 1; - } else { - dma_sync_single_for_device(ep->udc->gadget.dev.parent, - req->req.dma, req->req.length, - ep_dir(ep) - ? DMA_TO_DEVICE - : DMA_FROM_DEVICE); - req->mapped = 0; - } + retval = usb_gadget_map_request(&udc->gadget, _req, ep_dir(ep)); + if (retval) + return retval; req->req.status = -EINPROGRESS; req->req.actual = 0; @@ -780,18 +759,7 @@ mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) return 0; err_unmap_dma: - if (req->mapped) { - dma_unmap_single(ep->udc->gadget.dev.parent, - req->req.dma, req->req.length, - ((ep_dir(ep) == EP_DIR_IN) ? - DMA_TO_DEVICE : DMA_FROM_DEVICE)); - req->req.dma = DMA_ADDR_INVALID; - req->mapped = 0; - } else - dma_sync_single_for_cpu(ep->udc->gadget.dev.parent, - req->req.dma, req->req.length, - ((ep_dir(ep) == EP_DIR_IN) ? - DMA_TO_DEVICE : DMA_FROM_DEVICE)); + usb_gadget_unmap_request(&udc->gadget, _req, ep_dir(ep)); return retval; } @@ -1006,18 +974,12 @@ static struct usb_ep_ops mv_ep_ops = { static void udc_clock_enable(struct mv_udc *udc) { - unsigned int i; - - for (i = 0; i < udc->clknum; i++) - clk_prepare_enable(udc->clk[i]); + clk_prepare_enable(udc->clk); } static void udc_clock_disable(struct mv_udc *udc) { - unsigned int i; - - for (i = 0; i < udc->clknum; i++) - clk_disable_unprepare(udc->clk[i]); + clk_disable_unprepare(udc->clk); } static void udc_stop(struct mv_udc *udc) @@ -1386,7 +1348,6 @@ static int mv_udc_start(struct usb_gadget *gadget, /* hook up the driver ... */ driver->driver.bus = NULL; udc->driver = driver; - udc->gadget.dev.driver = &driver->driver; udc->usb_state = USB_STATE_ATTACHED; udc->ep0_state = WAIT_FOR_SETUP; @@ -1401,7 +1362,6 @@ static int mv_udc_start(struct usb_gadget *gadget, dev_err(&udc->dev->dev, "unable to register peripheral to otg\n"); udc->driver = NULL; - udc->gadget.dev.driver = NULL; return retval; } } @@ -1437,7 +1397,6 @@ static int mv_udc_stop(struct usb_gadget *gadget, spin_unlock_irqrestore(&udc->lock, flags); /* unbind gadget driver */ - udc->gadget.dev.driver = NULL; udc->driver = NULL; return 0; @@ -1528,14 +1487,7 @@ udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty) return 0; out: - if (req->mapped) { - dma_unmap_single(ep->udc->gadget.dev.parent, - req->req.dma, req->req.length, - ((ep_dir(ep) == EP_DIR_IN) ? - DMA_TO_DEVICE : DMA_FROM_DEVICE)); - req->req.dma = DMA_ADDR_INVALID; - req->mapped = 0; - } + usb_gadget_unmap_request(&udc->gadget, &req->req, ep_dir(ep)); return retval; } @@ -1695,6 +1647,8 @@ out: static void handle_setup_packet(struct mv_udc *udc, u8 ep_num, struct usb_ctrlrequest *setup) + __releases(&ep->udc->lock) + __acquires(&ep->udc->lock) { bool delegate = false; @@ -1891,7 +1845,7 @@ static void irq_process_tr_complete(struct mv_udc *udc) } } -void irq_process_reset(struct mv_udc *udc) +static void irq_process_reset(struct mv_udc *udc) { u32 tmp; unsigned int loops; @@ -2138,8 +2092,6 @@ static int mv_udc_remove(struct platform_device *pdev) mv_udc_disable(udc); - device_unregister(&udc->gadget.dev); - /* free dev, wait for the release() finished */ wait_for_completion(udc->done); @@ -2151,7 +2103,6 @@ static int mv_udc_probe(struct platform_device *pdev) struct mv_usb_platform_data *pdata = pdev->dev.platform_data; struct mv_udc *udc; int retval = 0; - int clk_i = 0; struct resource *r; size_t size; @@ -2160,8 +2111,7 @@ static int mv_udc_probe(struct platform_device *pdev) return -ENODEV; } - size = sizeof(*udc) + sizeof(struct clk *) * pdata->clknum; - udc = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); + udc = devm_kzalloc(&pdev->dev, sizeof(*udc), GFP_KERNEL); if (udc == NULL) { dev_err(&pdev->dev, "failed to allocate memory for udc\n"); return -ENOMEM; @@ -2173,26 +2123,24 @@ static int mv_udc_probe(struct platform_device *pdev) udc->dev = pdev; -#ifdef CONFIG_USB_OTG_UTILS if (pdata->mode == MV_USB_MODE_OTG) { udc->transceiver = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); - if (IS_ERR_OR_NULL(udc->transceiver)) { + if (IS_ERR(udc->transceiver)) { + retval = PTR_ERR(udc->transceiver); + + if (retval == -ENXIO) + return retval; + udc->transceiver = NULL; - return -ENODEV; + return -EPROBE_DEFER; } } -#endif - udc->clknum = pdata->clknum; - for (clk_i = 0; clk_i < udc->clknum; clk_i++) { - udc->clk[clk_i] = devm_clk_get(&pdev->dev, - pdata->clkname[clk_i]); - if (IS_ERR(udc->clk[clk_i])) { - retval = PTR_ERR(udc->clk[clk_i]); - return retval; - } - } + /* udc only have one sysclk. */ + udc->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(udc->clk)) + return PTR_ERR(udc->clk); r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "capregs"); if (r == NULL) { @@ -2311,16 +2259,8 @@ static int mv_udc_probe(struct platform_device *pdev) udc->gadget.max_speed = USB_SPEED_HIGH; /* support dual speed */ /* the "gadget" abstracts/virtualizes the controller */ - dev_set_name(&udc->gadget.dev, "gadget"); - udc->gadget.dev.parent = &pdev->dev; - udc->gadget.dev.dma_mask = pdev->dev.dma_mask; - udc->gadget.dev.release = gadget_release; udc->gadget.name = driver_name; /* gadget name */ - retval = device_register(&udc->gadget.dev); - if (retval) - goto err_destroy_dma; - eps_init(udc); /* VBUS detect: we can disable/enable clock on demand.*/ @@ -2342,7 +2282,7 @@ static int mv_udc_probe(struct platform_device *pdev) if (!udc->qwork) { dev_err(&pdev->dev, "cannot create workqueue\n"); retval = -ENOMEM; - goto err_unregister; + goto err_destroy_dma; } INIT_WORK(&udc->vbus_work, mv_udc_vbus_work); @@ -2358,7 +2298,8 @@ static int mv_udc_probe(struct platform_device *pdev) else udc->vbus_active = 1; - retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget); + retval = usb_add_gadget_udc_release(&pdev->dev, &udc->gadget, + gadget_release); if (retval) goto err_create_workqueue; @@ -2370,8 +2311,6 @@ static int mv_udc_probe(struct platform_device *pdev) err_create_workqueue: destroy_workqueue(udc->qwork); -err_unregister: - device_unregister(&udc->gadget.dev); err_destroy_dma: dma_pool_destroy(udc->dtd_pool); err_free_dma: diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/ncm.c index a22ad9af0565..3b02fd4649ce 100644 --- a/drivers/usb/gadget/ncm.c +++ b/drivers/usb/gadget/ncm.c @@ -111,6 +111,7 @@ static struct usb_gadget_strings *dev_strings[] = { NULL, }; +struct eth_dev *the_dev; static u8 hostaddr[ETH_ALEN]; /*-------------------------------------------------------------------------*/ @@ -124,7 +125,7 @@ static int __init ncm_do_config(struct usb_configuration *c) c->bmAttributes |= USB_CONFIG_ATT_WAKEUP; } - return ncm_bind_config(c, hostaddr); + return ncm_bind_config(c, hostaddr, the_dev); } static struct usb_configuration ncm_config_driver = { @@ -143,9 +144,9 @@ static int __init gncm_bind(struct usb_composite_dev *cdev) int status; /* set up network link layer */ - status = gether_setup(cdev->gadget, hostaddr); - if (status < 0) - return status; + the_dev = gether_setup(cdev->gadget, hostaddr); + if (IS_ERR(the_dev)) + return PTR_ERR(the_dev); /* Allocate string descriptor numbers ... note that string * contents can be overridden by the composite_dev glue. @@ -168,13 +169,13 @@ static int __init gncm_bind(struct usb_composite_dev *cdev) return 0; fail: - gether_cleanup(); + gether_cleanup(the_dev); return status; } static int __exit gncm_unbind(struct usb_composite_dev *cdev) { - gether_cleanup(); + gether_cleanup(the_dev); return 0; } diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c index 32524b631959..f1e50a3e322d 100644 --- a/drivers/usb/gadget/net2272.c +++ b/drivers/usb/gadget/net2272.c @@ -58,7 +58,6 @@ static const char * const ep_name[] = { "ep-a", "ep-b", "ep-c", }; -#define DMA_ADDR_INVALID (~(dma_addr_t)0) #ifdef CONFIG_USB_NET2272_DMA /* * use_dma: the NET2272 can use an external DMA controller. @@ -341,7 +340,6 @@ net2272_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) if (!req) return NULL; - req->req.dma = DMA_ADDR_INVALID; INIT_LIST_HEAD(&req->queue); return &req->req; @@ -913,7 +911,7 @@ net2272_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) } } } - if (likely(req != 0)) + if (likely(req)) list_add_tail(&req->queue, &ep->queue); if (likely(!list_empty(&ep->queue))) @@ -1467,7 +1465,6 @@ static int net2272_start(struct usb_gadget *_gadget, dev->softconnect = 1; driver->driver.bus = NULL; dev->driver = driver; - dev->gadget.dev.driver = &driver->driver; /* ... then enable host detection and ep0; and we're ready * for set_configuration as well as eventual disconnect. @@ -1517,7 +1514,6 @@ static int net2272_stop(struct usb_gadget *_gadget, stop_activity(dev, driver); spin_unlock_irqrestore(&dev->lock, flags); - dev->gadget.dev.driver = NULL; dev->driver = NULL; dev_dbg(dev->dev, "unregistered driver '%s'\n", driver->driver.name); @@ -1549,7 +1545,7 @@ net2272_handle_dma(struct net2272_ep *ep) | (ep->dev->dma_eot_polarity << EOT_POLARITY) | (ep->dev->dma_dack_polarity << DACK_POLARITY) | (ep->dev->dma_dreq_polarity << DREQ_POLARITY) - | ((ep->dma >> 1) << DMA_ENDPOINT_SELECT)); + | (ep->dma << DMA_ENDPOINT_SELECT)); ep->dev->dma_busy = 0; @@ -1622,7 +1618,7 @@ net2272_handle_ep(struct net2272_ep *ep) ep->irqs++; dev_vdbg(ep->dev->dev, "%s ack ep_stat0 %02x, ep_stat1 %02x, req %p\n", - ep->ep.name, stat0, stat1, req ? &req->req : 0); + ep->ep.name, stat0, stat1, req ? &req->req : NULL); net2272_ep_write(ep, EP_STAT0, stat0 & ~((1 << NAK_OUT_PACKETS) @@ -2216,7 +2212,6 @@ net2272_remove(struct net2272 *dev) free_irq(dev->irq, dev); iounmap(dev->base_addr); - device_unregister(&dev->gadget.dev); device_remove_file(dev->dev, &dev_attr_registers); dev_info(dev->dev, "unbind\n"); @@ -2243,10 +2238,6 @@ static struct net2272 *net2272_probe_init(struct device *dev, unsigned int irq) ret->gadget.max_speed = USB_SPEED_HIGH; /* the "gadget" abstracts/virtualizes the controller */ - dev_set_name(&ret->gadget.dev, "gadget"); - ret->gadget.dev.parent = dev; - ret->gadget.dev.dma_mask = dev->dma_mask; - ret->gadget.dev.release = net2272_gadget_release; ret->gadget.name = driver_name; return ret; @@ -2282,14 +2273,12 @@ net2272_probe_fin(struct net2272 *dev, unsigned int irqflags) dma_mode_string()); dev_info(dev->dev, "version: %s\n", driver_vers); - ret = device_register(&dev->gadget.dev); - if (ret) - goto err_irq; ret = device_create_file(dev->dev, &dev_attr_registers); if (ret) - goto err_dev_reg; + goto err_irq; - ret = usb_add_gadget_udc(dev->dev, &dev->gadget); + ret = usb_add_gadget_udc_release(dev->dev, &dev->gadget, + net2272_gadget_release); if (ret) goto err_add_udc; @@ -2297,8 +2286,6 @@ net2272_probe_fin(struct net2272 *dev, unsigned int irqflags) err_add_udc: device_remove_file(dev->dev, &dev_attr_registers); - err_dev_reg: - device_unregister(&dev->gadget.dev); err_irq: free_irq(dev->irq, dev); err: diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 3bd0f992fb49..fbd006ab31d3 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -65,7 +65,6 @@ #define DRIVER_DESC "PLX NET228x USB Peripheral Controller" #define DRIVER_VERSION "2005 Sept 27" -#define DMA_ADDR_INVALID (~(dma_addr_t)0) #define EP_DONTUSE 13 /* nonzero */ #define USE_RDK_LEDS /* GPIO pins control three LEDs */ @@ -406,7 +405,6 @@ net2280_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags) if (!req) return NULL; - req->req.dma = DMA_ADDR_INVALID; INIT_LIST_HEAD (&req->queue); /* this dma descriptor may be swapped with the previous dummy */ @@ -420,7 +418,6 @@ net2280_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags) return NULL; } td->dmacount = 0; /* not VALID */ - td->dmaaddr = cpu_to_le32 (DMA_ADDR_INVALID); td->dmadesc = td->dmaaddr; req->td = td; } @@ -1896,7 +1893,6 @@ static int net2280_start(struct usb_gadget *_gadget, dev->softconnect = 1; driver->driver.bus = NULL; dev->driver = driver; - dev->gadget.dev.driver = &driver->driver; retval = device_create_file (&dev->pdev->dev, &dev_attr_function); if (retval) goto err_unbind; @@ -1924,7 +1920,6 @@ static int net2280_start(struct usb_gadget *_gadget, err_func: device_remove_file (&dev->pdev->dev, &dev_attr_function); err_unbind: - dev->gadget.dev.driver = NULL; dev->driver = NULL; return retval; } @@ -1967,7 +1962,6 @@ static int net2280_stop(struct usb_gadget *_gadget, stop_activity (dev, driver); spin_unlock_irqrestore (&dev->lock, flags); - dev->gadget.dev.driver = NULL; dev->driver = NULL; net2280_led_active (dev, 0); @@ -2072,7 +2066,7 @@ static void handle_ep_small (struct net2280_ep *ep) return; /* manual DMA queue advance after short OUT */ - if (likely (ep->dma != 0)) { + if (likely (ep->dma)) { if (t & (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)) { u32 count; int stopped = ep->stopped; @@ -2330,7 +2324,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) /* hw handles device and interface status */ if (u.r.bRequestType != (USB_DIR_IN|USB_RECIP_ENDPOINT)) goto delegate; - if ((e = get_ep_by_addr (dev, w_index)) == 0 + if ((e = get_ep_by_addr (dev, w_index)) == NULL || w_length > 2) goto do_stall; @@ -2358,7 +2352,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) if (w_value != USB_ENDPOINT_HALT || w_length != 0) goto do_stall; - if ((e = get_ep_by_addr (dev, w_index)) == 0) + if ((e = get_ep_by_addr (dev, w_index)) == NULL) goto do_stall; if (e->wedged) { VDEBUG(dev, "%s wedged, halt not cleared\n", @@ -2380,7 +2374,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) if (w_value != USB_ENDPOINT_HALT || w_length != 0) goto do_stall; - if ((e = get_ep_by_addr (dev, w_index)) == 0) + if ((e = get_ep_by_addr (dev, w_index)) == NULL) goto do_stall; if (e->ep.name == ep0name) goto do_stall; @@ -2685,7 +2679,6 @@ static void net2280_remove (struct pci_dev *pdev) pci_resource_len (pdev, 0)); if (dev->enabled) pci_disable_device (pdev); - device_unregister (&dev->gadget.dev); device_remove_file (&pdev->dev, &dev_attr_registers); pci_set_drvdata (pdev, NULL); @@ -2717,10 +2710,6 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) dev->gadget.max_speed = USB_SPEED_HIGH; /* the "gadget" abstracts/virtualizes the controller */ - dev_set_name(&dev->gadget.dev, "gadget"); - dev->gadget.dev.parent = &pdev->dev; - dev->gadget.dev.dma_mask = pdev->dev.dma_mask; - dev->gadget.dev.release = gadget_release; dev->gadget.name = driver_name; /* now all the pci goodies ... */ @@ -2802,7 +2791,6 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) goto done; } td->dmacount = 0; /* not VALID */ - td->dmaaddr = cpu_to_le32 (DMA_ADDR_INVALID); td->dmadesc = td->dmaaddr; dev->ep [i].dummy = td; } @@ -2829,12 +2817,11 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) use_dma ? (use_dma_chaining ? "chaining" : "enabled") : "disabled"); - retval = device_register (&dev->gadget.dev); - if (retval) goto done; retval = device_create_file (&pdev->dev, &dev_attr_registers); if (retval) goto done; - retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget); + retval = usb_add_gadget_udc_release(&pdev->dev, &dev->gadget, + gadget_release); if (retval) goto done; return 0; diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c index def37403989a..3b344b41a167 100644 --- a/drivers/usb/gadget/nokia.c +++ b/drivers/usb/gadget/nokia.c @@ -37,11 +37,9 @@ * the runtime footprint, and giving us at least some parts of what * a "gcc --combine ... part1.c part2.c part3.c ... " build would. */ -#define USB_FACM_INCLUDED -#include "f_acm.c" +#define USBF_OBEX_INCLUDED #include "f_ecm.c" #include "f_obex.c" -#include "f_serial.c" #include "f_phonet.c" #include "u_ether.c" @@ -98,20 +96,40 @@ MODULE_AUTHOR("Felipe Balbi"); MODULE_LICENSE("GPL"); /*-------------------------------------------------------------------------*/ - +static struct usb_function *f_acm_cfg1; +static struct usb_function *f_acm_cfg2; static u8 hostaddr[ETH_ALEN]; +static struct eth_dev *the_dev; enum { TTY_PORT_OBEX0, TTY_PORT_OBEX1, - TTY_PORT_ACM, TTY_PORTS_MAX, }; static unsigned char tty_lines[TTY_PORTS_MAX]; +static struct usb_configuration nokia_config_500ma_driver = { + .label = "Bus Powered", + .bConfigurationValue = 1, + /* .iConfiguration = DYNAMIC */ + .bmAttributes = USB_CONFIG_ATT_ONE, + .MaxPower = 500, +}; + +static struct usb_configuration nokia_config_100ma_driver = { + .label = "Self Powered", + .bConfigurationValue = 2, + /* .iConfiguration = DYNAMIC */ + .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, + .MaxPower = 100, +}; + +static struct usb_function_instance *fi_acm; + static int __init nokia_bind_config(struct usb_configuration *c) { + struct usb_function *f_acm; int status = 0; status = phonet_bind_config(c); @@ -126,33 +144,32 @@ static int __init nokia_bind_config(struct usb_configuration *c) if (status) printk(KERN_DEBUG "could not bind obex config %d\n", 0); - status = acm_bind_config(c, tty_lines[TTY_PORT_ACM]); - if (status) - printk(KERN_DEBUG "could not bind acm config\n"); + f_acm = usb_get_function(fi_acm); + if (IS_ERR(f_acm)) + return PTR_ERR(f_acm); - status = ecm_bind_config(c, hostaddr); + status = usb_add_function(c, f_acm); if (status) - printk(KERN_DEBUG "could not bind ecm config\n"); + goto err_conf; + + status = ecm_bind_config(c, hostaddr, the_dev); + if (status) { + pr_debug("could not bind ecm config %d\n", status); + goto err_ecm; + } + if (c == &nokia_config_500ma_driver) + f_acm_cfg1 = f_acm; + else + f_acm_cfg2 = f_acm; return status; +err_ecm: + usb_remove_function(c, f_acm); +err_conf: + usb_put_function(f_acm); + return status; } -static struct usb_configuration nokia_config_500ma_driver = { - .label = "Bus Powered", - .bConfigurationValue = 1, - /* .iConfiguration = DYNAMIC */ - .bmAttributes = USB_CONFIG_ATT_ONE, - .MaxPower = 500, -}; - -static struct usb_configuration nokia_config_100ma_driver = { - .label = "Self Powered", - .bConfigurationValue = 2, - /* .iConfiguration = DYNAMIC */ - .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, - .MaxPower = 100, -}; - static int __init nokia_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; @@ -169,9 +186,11 @@ static int __init nokia_bind(struct usb_composite_dev *cdev) goto err_ether; } - status = gether_setup(cdev->gadget, hostaddr); - if (status < 0) + the_dev = gether_setup(cdev->gadget, hostaddr); + if (IS_ERR(the_dev)) { + status = PTR_ERR(the_dev); goto err_ether; + } status = usb_string_ids_tab(cdev, strings_dev); if (status < 0) @@ -185,24 +204,32 @@ static int __init nokia_bind(struct usb_composite_dev *cdev) if (!gadget_supports_altsettings(gadget)) goto err_usb; + fi_acm = usb_get_function_instance("acm"); + if (IS_ERR(fi_acm)) + goto err_usb; + /* finally register the configuration */ status = usb_add_config(cdev, &nokia_config_500ma_driver, nokia_bind_config); if (status < 0) - goto err_usb; + goto err_acm_inst; status = usb_add_config(cdev, &nokia_config_100ma_driver, nokia_bind_config); if (status < 0) - goto err_usb; + goto err_put_cfg1; usb_composite_overwrite_options(cdev, &coverwrite); dev_info(&gadget->dev, "%s\n", NOKIA_LONG_NAME); return 0; +err_put_cfg1: + usb_put_function(f_acm_cfg1); +err_acm_inst: + usb_put_function_instance(fi_acm); err_usb: - gether_cleanup(); + gether_cleanup(the_dev); err_ether: cur_line--; while (cur_line >= 0) @@ -217,12 +244,15 @@ static int __exit nokia_unbind(struct usb_composite_dev *cdev) { int i; + usb_put_function(f_acm_cfg1); + usb_put_function(f_acm_cfg2); + usb_put_function_instance(fi_acm); gphonet_cleanup(); for (i = 0; i < TTY_PORTS_MAX; i++) gserial_free_line(tty_lines[i]); - gether_cleanup(); + gether_cleanup(the_dev); return 0; } @@ -247,4 +277,3 @@ static void __exit nokia_cleanup(void) usb_composite_unregister(&nokia_driver); } module_exit(nokia_cleanup); - diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index f8445653577f..b8ed74a823cb 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -2067,7 +2067,6 @@ static int omap_udc_start(struct usb_gadget *g, /* hook up the driver */ driver->driver.bus = NULL; udc->driver = driver; - udc->gadget.dev.driver = &driver->driver; spin_unlock_irqrestore(&udc->lock, flags); if (udc->dc_clk != NULL) @@ -2083,7 +2082,6 @@ static int omap_udc_start(struct usb_gadget *g, ERR("can't bind to transceiver\n"); if (driver->unbind) { driver->unbind(&udc->gadget); - udc->gadget.dev.driver = NULL; udc->driver = NULL; } goto done; @@ -2129,7 +2127,6 @@ static int omap_udc_stop(struct usb_gadget *g, udc_quiesce(udc); spin_unlock_irqrestore(&udc->lock, flags); - udc->gadget.dev.driver = NULL; udc->driver = NULL; if (udc->dc_clk != NULL) @@ -2631,14 +2628,6 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv) udc->gadget.speed = USB_SPEED_UNKNOWN; udc->gadget.max_speed = USB_SPEED_FULL; udc->gadget.name = driver_name; - - device_initialize(&udc->gadget.dev); - dev_set_name(&udc->gadget.dev, "gadget"); - udc->gadget.dev.release = omap_udc_release; - udc->gadget.dev.parent = &odev->dev; - if (use_dma) - udc->gadget.dev.dma_mask = odev->dev.dma_mask; - udc->transceiver = xceiv; /* ep0 is special; put it right after the SETUP buffer */ @@ -2912,14 +2901,13 @@ bad_on_1710: } create_proc_file(); - status = device_add(&udc->gadget.dev); + status = usb_add_gadget_udc_release(&pdev->dev, &udc->gadget, + omap_udc_release); if (status) goto cleanup4; - status = usb_add_gadget_udc(&pdev->dev, &udc->gadget); - if (!status) - return status; - /* If fail, fall through */ + return 0; + cleanup4: remove_proc_file(); @@ -2990,7 +2978,6 @@ static int omap_udc_remove(struct platform_device *pdev) release_mem_region(pdev->resource[0].start, pdev->resource[0].end - pdev->resource[0].start + 1); - device_unregister(&udc->gadget.dev); wait_for_completion(&done); return 0; diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index a787a8ef672b..24174e1d1564 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -358,7 +358,6 @@ struct pch_udc_dev { prot_stall:1, irq_registered:1, mem_region:1, - registered:1, suspended:1, connected:1, vbus_session:1, @@ -1441,6 +1440,8 @@ static void pch_vbus_gpio_free(struct pch_udc_dev *dev) */ static void complete_req(struct pch_udc_ep *ep, struct pch_udc_request *req, int status) + __releases(&dev->lock) + __acquires(&dev->lock) { struct pch_udc_dev *dev; unsigned halted = ep->halted; @@ -2382,6 +2383,8 @@ static void pch_udc_svc_control_in(struct pch_udc_dev *dev) * @dev: Reference to the device structure */ static void pch_udc_svc_control_out(struct pch_udc_dev *dev) + __releases(&dev->lock) + __acquires(&dev->lock) { u32 stat; int setup_supported; @@ -2989,7 +2992,6 @@ static int pch_udc_start(struct usb_gadget *g, driver->driver.bus = NULL; dev->driver = driver; - dev->gadget.dev.driver = &driver->driver; /* get ready for ep0 traffic */ pch_udc_setup_ep0(dev); @@ -3010,7 +3012,6 @@ static int pch_udc_stop(struct usb_gadget *g, pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK); /* Assures that there are no pending requests with this driver */ - dev->gadget.dev.driver = NULL; dev->driver = NULL; dev->connected = 0; @@ -3078,8 +3079,6 @@ static void pch_udc_remove(struct pci_dev *pdev) pci_resource_len(pdev, PCH_UDC_PCI_BAR)); if (dev->active) pci_disable_device(pdev); - if (dev->registered) - device_unregister(&dev->gadget.dev); kfree(dev); pci_set_drvdata(pdev, NULL); } @@ -3196,21 +3195,13 @@ static int pch_udc_probe(struct pci_dev *pdev, if (retval) goto finished; - dev_set_name(&dev->gadget.dev, "gadget"); - dev->gadget.dev.parent = &pdev->dev; - dev->gadget.dev.dma_mask = pdev->dev.dma_mask; - dev->gadget.dev.release = gadget_release; dev->gadget.name = KBUILD_MODNAME; dev->gadget.max_speed = USB_SPEED_HIGH; - retval = device_register(&dev->gadget.dev); - if (retval) - goto finished; - dev->registered = 1; - /* Put the device in disconnected state till a driver is bound */ pch_udc_set_disconnect(dev); - retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget); + retval = usb_add_gadget_udc_release(&pdev->dev, &dev->gadget, + gadget_release); if (retval) goto finished; return 0; diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index d0f37484b6b0..ef47495dec8f 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -1263,7 +1263,6 @@ static int pxa25x_udc_start(struct usb_gadget *g, /* first hook up the driver ... */ dev->driver = driver; - dev->gadget.dev.driver = &driver->driver; dev->pullup = 1; /* ... then enable host detection and ep0; and we're ready @@ -1325,7 +1324,6 @@ static int pxa25x_udc_stop(struct usb_gadget*g, if (!IS_ERR_OR_NULL(dev->transceiver)) (void) otg_set_peripheral(dev->transceiver->otg, NULL); - dev->gadget.dev.driver = NULL; dev->driver = NULL; dump_state(dev); @@ -2138,17 +2136,6 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev) dev->timer.function = udc_watchdog; dev->timer.data = (unsigned long) dev; - device_initialize(&dev->gadget.dev); - dev->gadget.dev.parent = &pdev->dev; - dev->gadget.dev.dma_mask = pdev->dev.dma_mask; - - retval = device_add(&dev->gadget.dev); - if (retval) { - dev->driver = NULL; - dev->gadget.dev.driver = NULL; - goto err_device_add; - } - the_controller = dev; platform_set_drvdata(pdev, dev); @@ -2199,8 +2186,6 @@ lubbock_fail0: free_irq(irq, dev); #endif err_irq1: - device_unregister(&dev->gadget.dev); - err_device_add: if (gpio_is_valid(dev->mach->gpio_pullup)) gpio_free(dev->mach->gpio_pullup); err_gpio_pullup: @@ -2226,7 +2211,6 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev) return -EBUSY; usb_del_gadget_udc(&dev->gadget); - device_unregister(&dev->gadget.dev); dev->pullup = 0; pullup(dev); diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 2fc867652ef5..6b4c7d95853f 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -24,14 +24,12 @@ #include <linux/gpio.h> #include <linux/slab.h> #include <linux/prefetch.h> - -#include <asm/byteorder.h> -#include <mach/hardware.h> +#include <linux/byteorder/generic.h> +#include <linux/platform_data/pxa2xx_udc.h> #include <linux/usb.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> -#include <mach/udc.h> #include "pxa27x_udc.h" @@ -611,7 +609,7 @@ static void inc_ep_stats_bytes(struct pxa_ep *ep, int count, int is_in) * * Find the physical pxa27x ep, and setup its UDCCR */ -static __init void pxa_ep_setup(struct pxa_ep *ep) +static void pxa_ep_setup(struct pxa_ep *ep) { u32 new_udccr; @@ -633,7 +631,7 @@ static __init void pxa_ep_setup(struct pxa_ep *ep) * * Setup all pxa physical endpoints, except ep0 */ -static __init void pxa_eps_setup(struct pxa_udc *dev) +static void pxa_eps_setup(struct pxa_udc *dev) { unsigned int i; @@ -1718,7 +1716,7 @@ static void udc_disable(struct pxa_udc *udc) * Initializes gadget endpoint list, endpoints locks. No action is taken * on the hardware. */ -static __init void udc_init_data(struct pxa_udc *dev) +static void udc_init_data(struct pxa_udc *dev) { int i; struct pxa_ep *ep; @@ -1811,7 +1809,6 @@ static int pxa27x_udc_start(struct usb_gadget *g, /* first hook up the driver ... */ udc->driver = driver; - udc->gadget.dev.driver = &driver->driver; dplus_pullup(udc, 1); if (!IS_ERR_OR_NULL(udc->transceiver)) { @@ -1829,7 +1826,6 @@ static int pxa27x_udc_start(struct usb_gadget *g, fail: udc->driver = NULL; - udc->gadget.dev.driver = NULL; return retval; } @@ -1871,7 +1867,6 @@ static int pxa27x_udc_stop(struct usb_gadget *g, udc->driver = NULL; - if (!IS_ERR_OR_NULL(udc->transceiver)) return otg_set_peripheral(udc->transceiver->otg, NULL); return 0; @@ -2413,7 +2408,7 @@ static struct pxa_udc memory = { * Perform basic init : allocates udc clock, creates sysfs files, requests * irq. */ -static int __init pxa_udc_probe(struct platform_device *pdev) +static int pxa_udc_probe(struct platform_device *pdev) { struct resource *regs; struct pxa_udc *udc = &memory; @@ -2456,9 +2451,6 @@ static int __init pxa_udc_probe(struct platform_device *pdev) goto err_map; } - device_initialize(&udc->gadget.dev); - udc->gadget.dev.parent = &pdev->dev; - udc->gadget.dev.dma_mask = NULL; udc->vbus_sensed = 0; the_controller = udc; @@ -2475,12 +2467,6 @@ static int __init pxa_udc_probe(struct platform_device *pdev) goto err_irq; } - retval = device_add(&udc->gadget.dev); - if (retval) { - dev_err(udc->dev, "device_add error %d\n", retval); - goto err_dev_add; - } - retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget); if (retval) goto err_add_udc; @@ -2490,8 +2476,6 @@ static int __init pxa_udc_probe(struct platform_device *pdev) return 0; err_add_udc: - device_unregister(&udc->gadget.dev); -err_dev_add: free_irq(udc->irq, udc); err_irq: iounmap(udc->regs); @@ -2506,13 +2490,12 @@ err_clk: * pxa_udc_remove - removes the udc device driver * @_dev: platform device */ -static int __exit pxa_udc_remove(struct platform_device *_dev) +static int pxa_udc_remove(struct platform_device *_dev) { struct pxa_udc *udc = platform_get_drvdata(_dev); int gpio = udc->mach->gpio_pullup; usb_del_gadget_udc(&udc->gadget); - device_del(&udc->gadget.dev); usb_gadget_unregister_driver(udc->driver); free_irq(udc->irq, udc); pxa_cleanup_debugfs(udc); @@ -2625,7 +2608,8 @@ static struct platform_driver udc_driver = { .name = "pxa27x-udc", .owner = THIS_MODULE, }, - .remove = __exit_p(pxa_udc_remove), + .probe = pxa_udc_probe, + .remove = pxa_udc_remove, .shutdown = pxa_udc_shutdown, #ifdef CONFIG_PM .suspend = pxa_udc_suspend, @@ -2633,22 +2617,7 @@ static struct platform_driver udc_driver = { #endif }; -static int __init udc_init(void) -{ - if (!cpu_is_pxa27x() && !cpu_is_pxa3xx()) - return -ENODEV; - - printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION); - return platform_driver_probe(&udc_driver, pxa_udc_probe); -} -module_init(udc_init); - - -static void __exit udc_exit(void) -{ - platform_driver_unregister(&udc_driver); -} -module_exit(udc_exit); +module_platform_driver(udc_driver); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR("Robert Jarzmik"); diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index f46a1b77ce3e..0b742d171843 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -1837,7 +1837,6 @@ static int __exit r8a66597_remove(struct platform_device *pdev) clk_put(r8a66597->clk); } - device_unregister(&r8a66597->gadget.dev); kfree(r8a66597); return 0; } @@ -1915,17 +1914,8 @@ static int __init r8a66597_probe(struct platform_device *pdev) r8a66597->irq_sense_low = irq_trigger == IRQF_TRIGGER_LOW; r8a66597->gadget.ops = &r8a66597_gadget_ops; - dev_set_name(&r8a66597->gadget.dev, "gadget"); r8a66597->gadget.max_speed = USB_SPEED_HIGH; - r8a66597->gadget.dev.parent = &pdev->dev; - r8a66597->gadget.dev.dma_mask = pdev->dev.dma_mask; - r8a66597->gadget.dev.release = pdev->dev.release; r8a66597->gadget.name = udc_name; - ret = device_register(&r8a66597->gadget.dev); - if (ret < 0) { - dev_err(&pdev->dev, "device_register failed\n"); - goto clean_up; - } init_timer(&r8a66597->timer); r8a66597->timer.function = r8a66597_timer; @@ -1939,7 +1929,7 @@ static int __init r8a66597_probe(struct platform_device *pdev) dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name); ret = PTR_ERR(r8a66597->clk); - goto clean_up_dev; + goto clean_up; } clk_enable(r8a66597->clk); } @@ -2007,8 +1997,6 @@ clean_up2: clk_disable(r8a66597->clk); clk_put(r8a66597->clk); } -clean_up_dev: - device_unregister(&r8a66597->gadget.dev); clean_up: if (r8a66597) { if (r8a66597->sudmac_reg) diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index c26564f29a2c..a3cdc32115d5 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -39,8 +39,6 @@ #include "s3c-hsotg.h" -#define DMA_ADDR_INVALID (~((dma_addr_t)0)) - static const char * const s3c_hsotg_supply_names[] = { "vusb_d", /* digital USB supply, 1.2V */ "vusb_a", /* analog USB supply, 1.1V */ @@ -405,7 +403,6 @@ static struct usb_request *s3c_hsotg_ep_alloc_request(struct usb_ep *ep, INIT_LIST_HEAD(&req->queue); - req->req.dma = DMA_ADDR_INVALID; return &req->req; } @@ -435,24 +432,12 @@ static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg, struct s3c_hsotg_req *hs_req) { struct usb_request *req = &hs_req->req; - enum dma_data_direction dir; - - dir = hs_ep->dir_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE; /* ignore this if we're not moving any data */ if (hs_req->req.length == 0) return; - if (hs_req->mapped) { - /* we mapped this, so unmap and remove the dma */ - - dma_unmap_single(hsotg->dev, req->dma, req->length, dir); - - req->dma = DMA_ADDR_INVALID; - hs_req->mapped = 0; - } else { - dma_sync_single_for_cpu(hsotg->dev, req->dma, req->length, dir); - } + usb_gadget_unmap_request(&hsotg->gadget, hs_req, hs_ep->dir_in); } /** @@ -852,37 +837,16 @@ static int s3c_hsotg_map_dma(struct s3c_hsotg *hsotg, struct s3c_hsotg_ep *hs_ep, struct usb_request *req) { - enum dma_data_direction dir; struct s3c_hsotg_req *hs_req = our_req(req); - - dir = hs_ep->dir_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE; + int ret; /* if the length is zero, ignore the DMA data */ if (hs_req->req.length == 0) return 0; - if (req->dma == DMA_ADDR_INVALID) { - dma_addr_t dma; - - dma = dma_map_single(hsotg->dev, req->buf, req->length, dir); - - if (unlikely(dma_mapping_error(hsotg->dev, dma))) - goto dma_error; - - if (dma & 3) { - dev_err(hsotg->dev, "%s: unaligned dma buffer\n", - __func__); - - dma_unmap_single(hsotg->dev, dma, req->length, dir); - return -EINVAL; - } - - hs_req->mapped = 1; - req->dma = dma; - } else { - dma_sync_single_for_cpu(hsotg->dev, req->dma, req->length, dir); - hs_req->mapped = 0; - } + ret = usb_gadget_map_request(&hsotg->gadget, req, hs_ep->dir_in); + if (ret) + goto dma_error; return 0; @@ -2961,9 +2925,7 @@ static int s3c_hsotg_udc_start(struct usb_gadget *gadget, driver->driver.bus = NULL; hsotg->driver = driver; - hsotg->gadget.dev.driver = &driver->driver; hsotg->gadget.dev.of_node = hsotg->dev->of_node; - hsotg->gadget.dev.dma_mask = hsotg->dev->dma_mask; hsotg->gadget.speed = USB_SPEED_UNKNOWN; ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies), @@ -2979,7 +2941,6 @@ static int s3c_hsotg_udc_start(struct usb_gadget *gadget, err: hsotg->driver = NULL; - hsotg->gadget.dev.driver = NULL; return ret; } @@ -3014,7 +2975,6 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget, hsotg->driver = NULL; hsotg->gadget.speed = USB_SPEED_UNKNOWN; - hsotg->gadget.dev.driver = NULL; spin_unlock_irqrestore(&hsotg->lock, flags); @@ -3484,16 +3444,6 @@ static void s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg) } /** - * s3c_hsotg_release - release callback for hsotg device - * @dev: Device to for which release is called - * - * Nothing to do as the resource is allocated using devm_ API. - */ -static void s3c_hsotg_release(struct device *dev) -{ -} - -/** * s3c_hsotg_probe - probe function for hsotg driver * @pdev: The platform information for the driver */ @@ -3517,7 +3467,7 @@ static int s3c_hsotg_probe(struct platform_device *pdev) } phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); - if (IS_ERR_OR_NULL(phy)) { + if (IS_ERR(phy)) { /* Fallback for pdata */ plat = pdev->dev.platform_data; if (!plat) { @@ -3567,18 +3517,10 @@ static int s3c_hsotg_probe(struct platform_device *pdev) dev_info(dev, "regs %p, irq %d\n", hsotg->regs, hsotg->irq); - device_initialize(&hsotg->gadget.dev); - - dev_set_name(&hsotg->gadget.dev, "gadget"); - hsotg->gadget.max_speed = USB_SPEED_HIGH; hsotg->gadget.ops = &s3c_hsotg_gadget_ops; hsotg->gadget.name = dev_name(dev); - hsotg->gadget.dev.parent = dev; - hsotg->gadget.dev.dma_mask = dev->dma_mask; - hsotg->gadget.dev.release = s3c_hsotg_release; - /* reset the system */ clk_prepare_enable(hsotg->clk); @@ -3658,12 +3600,6 @@ static int s3c_hsotg_probe(struct platform_device *pdev) s3c_hsotg_phy_disable(hsotg); - ret = device_add(&hsotg->gadget.dev); - if (ret) { - put_device(&hsotg->gadget.dev); - goto err_ep_mem; - } - ret = usb_add_gadget_udc(&pdev->dev, &hsotg->gadget); if (ret) goto err_ep_mem; @@ -3702,10 +3638,8 @@ static int s3c_hsotg_remove(struct platform_device *pdev) } s3c_hsotg_phy_disable(hsotg); - clk_disable_unprepare(hsotg->clk); - device_unregister(&hsotg->gadget.dev); return 0; } diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c index 458965a1b138..b1f0771fbd3d 100644 --- a/drivers/usb/gadget/s3c-hsudc.c +++ b/drivers/usb/gadget/s3c-hsudc.c @@ -283,7 +283,6 @@ static void s3c_hsudc_nuke_ep(struct s3c_hsudc_ep *hsep, int status) /** * s3c_hsudc_stop_activity - Stop activity on all endpoints. * @hsudc: Device controller for which EP activity is to be stopped. - * @driver: Reference to the gadget driver which is currently active. * * All the endpoints are stopped and any pending transfer requests if any on * the endpoint are terminated. @@ -1154,7 +1153,6 @@ static int s3c_hsudc_start(struct usb_gadget *gadget, return -EBUSY; hsudc->driver = driver; - hsudc->gadget.dev.driver = &driver->driver; ret = regulator_bulk_enable(ARRAY_SIZE(hsudc->supplies), hsudc->supplies); @@ -1190,7 +1188,6 @@ err_otg: regulator_bulk_disable(ARRAY_SIZE(hsudc->supplies), hsudc->supplies); err_supplies: hsudc->driver = NULL; - hsudc->gadget.dev.driver = NULL; return ret; } @@ -1208,7 +1205,6 @@ static int s3c_hsudc_stop(struct usb_gadget *gadget, spin_lock_irqsave(&hsudc->lock, flags); hsudc->driver = NULL; - hsudc->gadget.dev.driver = NULL; hsudc->gadget.speed = USB_SPEED_UNKNOWN; s3c_hsudc_uninit_phy(); @@ -1303,15 +1299,10 @@ static int s3c_hsudc_probe(struct platform_device *pdev) spin_lock_init(&hsudc->lock); - dev_set_name(&hsudc->gadget.dev, "gadget"); - hsudc->gadget.max_speed = USB_SPEED_HIGH; hsudc->gadget.ops = &s3c_hsudc_gadget_ops; hsudc->gadget.name = dev_name(dev); - hsudc->gadget.dev.parent = dev; - hsudc->gadget.dev.dma_mask = dev->dma_mask; hsudc->gadget.ep0 = &hsudc->ep[0].ep; - hsudc->gadget.is_otg = 0; hsudc->gadget.is_a_peripheral = 0; hsudc->gadget.speed = USB_SPEED_UNKNOWN; @@ -1345,12 +1336,6 @@ static int s3c_hsudc_probe(struct platform_device *pdev) disable_irq(hsudc->irq); local_irq_enable(); - ret = device_register(&hsudc->gadget.dev); - if (ret) { - put_device(&hsudc->gadget.dev); - goto err_add_device; - } - ret = usb_add_gadget_udc(&pdev->dev, &hsudc->gadget); if (ret) goto err_add_udc; @@ -1359,7 +1344,6 @@ static int s3c_hsudc_probe(struct platform_device *pdev) return 0; err_add_udc: - device_unregister(&hsudc->gadget.dev); err_add_device: clk_disable(hsudc->uclk); err_res: diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 08f89652533b..d0e75e1b3ccb 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -1674,7 +1674,6 @@ static int s3c2410_udc_start(struct usb_gadget *g, /* Hook the driver */ udc->driver = driver; - udc->gadget.dev.driver = &driver->driver; /* Enable udc */ s3c2410_udc_enable(udc); @@ -1824,17 +1823,6 @@ static int s3c2410_udc_probe(struct platform_device *pdev) goto err_mem; } - device_initialize(&udc->gadget.dev); - udc->gadget.dev.parent = &pdev->dev; - udc->gadget.dev.dma_mask = pdev->dev.dma_mask; - - /* Bind the driver */ - retval = device_add(&udc->gadget.dev); - if (retval) { - dev_err(&udc->gadget.dev, "Error in device_add() : %d\n", retval); - goto err_device_add; - } - the_controller = udc; platform_set_drvdata(pdev, udc); @@ -1923,8 +1911,6 @@ err_gpio_claim: err_int: free_irq(IRQ_USBD, udc); err_map: - device_unregister(&udc->gadget.dev); -err_device_add: iounmap(base_addr); err_mem: release_mem_region(rsrc_start, rsrc_len); @@ -1946,7 +1932,6 @@ static int s3c2410_udc_remove(struct platform_device *pdev) return -EBUSY; usb_del_gadget_udc(&udc->gadget); - device_unregister(&udc->gadget.dev); debugfs_remove(udc->regs_info); if (udc_info && !udc_info->udc_command && diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index 68d7bb06ebcb..1f5f978d35d5 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -12,6 +12,7 @@ #include <linux/kernel.h> #include <linux/device.h> +#include <linux/module.h> #include <linux/tty.h> #include <linux/tty_flip.h> @@ -28,18 +29,6 @@ #define GS_VERSION_NAME GS_LONG_NAME " " GS_VERSION_STR /*-------------------------------------------------------------------------*/ - -/* - * Kbuild is not very cooperative with respect to linking separately - * compiled library objects into one module. So for now we won't use - * separate compilation ... ensuring init/exit sections work to shrink - * the runtime footprint, and giving us at least some parts of what - * a "gcc --combine ... part1.c part2.c part3.c ... " build would. - */ -#include "f_obex.c" -#include "f_serial.c" - -/*-------------------------------------------------------------------------*/ USB_GADGET_COMPOSITE_OPTIONS(); /* Thanks to NetChip Technologies for donating this product ID. @@ -126,27 +115,6 @@ module_param(n_ports, uint, 0); MODULE_PARM_DESC(n_ports, "number of ports to create, default=1"); /*-------------------------------------------------------------------------*/ -static unsigned char tty_lines[MAX_U_SERIAL_PORTS]; - -static int __init serial_bind_obex_config(struct usb_configuration *c) -{ - unsigned i; - int status = 0; - - for (i = 0; i < n_ports && status == 0; i++) - status = obex_bind_config(c, tty_lines[i]); - return status; -} - -static int __init serial_bind_gser_config(struct usb_configuration *c) -{ - unsigned i; - int status = 0; - - for (i = 0; i < n_ports && status == 0; i++) - status = gser_bind_config(c, tty_lines[i]); - return status; -} static struct usb_configuration serial_config_driver = { /* .label = f(use_acm) */ @@ -169,15 +137,12 @@ static int serial_register_ports(struct usb_composite_dev *cdev, goto out; for (i = 0; i < n_ports; i++) { - struct f_serial_opts *opts; fi_serial[i] = usb_get_function_instance(f_name); if (IS_ERR(fi_serial[i])) { ret = PTR_ERR(fi_serial[i]); goto fail; } - opts = container_of(fi_serial[i], struct f_serial_opts, func_inst); - opts->port_num = tty_lines[i]; f_serial[i] = usb_get_function(fi_serial[i]); if (IS_ERR(f_serial[i])) { @@ -212,13 +177,6 @@ out: static int __init gs_bind(struct usb_composite_dev *cdev) { int status; - int cur_line; - - for (cur_line = 0; cur_line < n_ports; cur_line++) { - status = gserial_alloc_line(&tty_lines[cur_line]); - if (status) - goto fail; - } /* Allocate string descriptor numbers ... note that string * contents can be overridden by the composite_dev glue. @@ -243,11 +201,12 @@ static int __init gs_bind(struct usb_composite_dev *cdev) "acm"); usb_ep_autoconfig_reset(cdev->gadget); } else if (use_obex) - status = usb_add_config(cdev, &serial_config_driver, - serial_bind_obex_config); - else - status = usb_add_config(cdev, &serial_config_driver, - serial_bind_gser_config); + status = serial_register_ports(cdev, &serial_config_driver, + "obex"); + else { + status = serial_register_ports(cdev, &serial_config_driver, + "gser"); + } if (status < 0) goto fail; @@ -257,9 +216,6 @@ static int __init gs_bind(struct usb_composite_dev *cdev) return 0; fail: - cur_line--; - while (cur_line >= 0) - gserial_free_line(tty_lines[cur_line--]); return status; } @@ -270,7 +226,6 @@ static int gs_unbind(struct usb_composite_dev *cdev) for (i = 0; i < n_ports; i++) { usb_put_function(f_serial[i]); usb_put_function_instance(fi_serial[i]); - gserial_free_line(tty_lines[i]); } return 0; } diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index a0aa721d8b21..4b76124ce96b 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -50,7 +50,6 @@ struct eth_dev { /* lock is held while accessing port_usb - * or updating its backlink port_usb->ioport */ spinlock_t lock; struct gether *port_usb; @@ -729,8 +728,6 @@ static int get_ether_addr(const char *str, u8 *dev_addr) return 1; } -static struct eth_dev *the_dev; - static const struct net_device_ops eth_netdev_ops = { .ndo_open = eth_open, .ndo_stop = eth_stop, @@ -758,19 +755,16 @@ static struct device_type gadget_type = { * * Returns negative errno, or zero on success */ -int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN], +struct eth_dev *gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN], const char *netname) { struct eth_dev *dev; struct net_device *net; int status; - if (the_dev) - return -EBUSY; - net = alloc_etherdev(sizeof *dev); if (!net) - return -ENOMEM; + return ERR_PTR(-ENOMEM); dev = netdev_priv(net); spin_lock_init(&dev->lock); @@ -807,12 +801,11 @@ int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN], if (status < 0) { dev_dbg(&g->dev, "register_netdev failed, %d\n", status); free_netdev(net); + dev = ERR_PTR(status); } else { INFO(dev, "MAC %pM\n", net->dev_addr); INFO(dev, "HOST MAC %pM\n", dev->host_mac); - the_dev = dev; - /* two kinds of host-initiated state changes: * - iff DATA transfer is active, carrier is "on" * - tx queueing enabled if open *and* carrier is "on" @@ -820,7 +813,7 @@ int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN], netif_carrier_off(net); } - return status; + return dev; } /** @@ -829,19 +822,16 @@ int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN], * * This is called to free all resources allocated by @gether_setup(). */ -void gether_cleanup(void) +void gether_cleanup(struct eth_dev *dev) { - if (!the_dev) + if (!dev) return; - unregister_netdev(the_dev->net); - flush_work(&the_dev->work); - free_netdev(the_dev->net); - - the_dev = NULL; + unregister_netdev(dev->net); + flush_work(&dev->work); + free_netdev(dev->net); } - /** * gether_connect - notify network layer that USB link is active * @link: the USB link, set up with endpoints, descriptors matching @@ -860,7 +850,7 @@ void gether_cleanup(void) */ struct net_device *gether_connect(struct gether *link) { - struct eth_dev *dev = the_dev; + struct eth_dev *dev = link->ioport; int result = 0; if (!dev) @@ -895,7 +885,6 @@ struct net_device *gether_connect(struct gether *link) spin_lock(&dev->lock); dev->port_usb = link; - link->ioport = dev; if (netif_running(dev->net)) { if (link->open) link->open(link); @@ -989,6 +978,5 @@ void gether_disconnect(struct gether *link) spin_lock(&dev->lock); dev->port_usb = NULL; - link->ioport = NULL; spin_unlock(&dev->lock); } diff --git a/drivers/usb/gadget/u_ether.h b/drivers/usb/gadget/u_ether.h index 6f4a1623d854..02522338a708 100644 --- a/drivers/usb/gadget/u_ether.h +++ b/drivers/usb/gadget/u_ether.h @@ -21,6 +21,7 @@ #include "gadget_chips.h" +struct eth_dev; /* * This represents the USB side of an "ethernet" link, managed by a USB @@ -70,7 +71,7 @@ struct gether { |USB_CDC_PACKET_TYPE_DIRECTED) /* variant of gether_setup that allows customizing network device name */ -int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN], +struct eth_dev *gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN], const char *netname); /* netdev setup/teardown as directed by the gadget driver */ @@ -86,12 +87,13 @@ int gether_setup_name(struct usb_gadget *g, u8 ethaddr[ETH_ALEN], * * Returns negative errno, or zero on success */ -static inline int gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN]) +static inline struct eth_dev *gether_setup(struct usb_gadget *g, + u8 ethaddr[ETH_ALEN]) { return gether_setup_name(g, ethaddr, "usb"); } -void gether_cleanup(void); +void gether_cleanup(struct eth_dev *dev); /* connect/disconnect is handled by individual functions */ struct net_device *gether_connect(struct gether *); @@ -111,21 +113,24 @@ static inline bool can_support_ecm(struct usb_gadget *gadget) } /* each configuration may bind one instance of an ethernet link */ -int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]); -int ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]); -int ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]); -int eem_bind_config(struct usb_configuration *c); +int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], + struct eth_dev *dev); +int ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], + struct eth_dev *dev); +int ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], + struct eth_dev *dev); +int eem_bind_config(struct usb_configuration *c, struct eth_dev *dev); #ifdef USB_ETH_RNDIS int rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], - u32 vendorID, const char *manufacturer); + u32 vendorID, const char *manufacturer, struct eth_dev *dev); #else static inline int rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], - u32 vendorID, const char *manufacturer) + u32 vendorID, const char *manufacturer, struct eth_dev *dev) { return 0; } @@ -145,9 +150,9 @@ rndis_bind_config_vendor(struct usb_configuration *c, u8 ethaddr[ETH_ALEN], * for calling @gether_cleanup() before module unload. */ static inline int rndis_bind_config(struct usb_configuration *c, - u8 ethaddr[ETH_ALEN]) + u8 ethaddr[ETH_ALEN], struct eth_dev *dev) { - return rndis_bind_config_vendor(c, ethaddr, 0, NULL); + return rndis_bind_config_vendor(c, ethaddr, 0, NULL, dev); } diff --git a/drivers/usb/gadget/u_serial.h b/drivers/usb/gadget/u_serial.h index 66ce73a00509..c20210c0babd 100644 --- a/drivers/usb/gadget/u_serial.h +++ b/drivers/usb/gadget/u_serial.h @@ -65,7 +65,6 @@ int gserial_connect(struct gserial *, u8 port_num); void gserial_disconnect(struct gserial *); /* functions are bound to configurations by a config or gadget driver */ -int acm_bind_config(struct usb_configuration *c, u8 port_num); int gser_bind_config(struct usb_configuration *c, u8 port_num); int obex_bind_config(struct usb_configuration *c, u8 port_num); diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index f8f62c3ed65e..ffd8fa541101 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -101,6 +101,16 @@ EXPORT_SYMBOL_GPL(usb_gadget_unmap_request); /* ------------------------------------------------------------------------- */ +void usb_gadget_set_state(struct usb_gadget *gadget, + enum usb_device_state state) +{ + gadget->state = state; + sysfs_notify(&gadget->dev.kobj, NULL, "status"); +} +EXPORT_SYMBOL_GPL(usb_gadget_set_state); + +/* ------------------------------------------------------------------------- */ + /** * usb_gadget_udc_start - tells usb device controller to start up * @gadget: The gadget we want to get started @@ -156,15 +166,23 @@ static void usb_udc_release(struct device *dev) } static const struct attribute_group *usb_udc_attr_groups[]; + +static void usb_udc_nop_release(struct device *dev) +{ + dev_vdbg(dev, "%s\n", __func__); +} + /** - * usb_add_gadget_udc - adds a new gadget to the udc class driver list - * @parent: the parent device to this udc. Usually the controller - * driver's device. - * @gadget: the gadget to be added to the list + * usb_add_gadget_udc_release - adds a new gadget to the udc class driver list + * @parent: the parent device to this udc. Usually the controller driver's + * device. + * @gadget: the gadget to be added to the list. + * @release: a gadget release function. * * Returns zero on success, negative errno otherwise. */ -int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget) +int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget, + void (*release)(struct device *dev)) { struct usb_udc *udc; int ret = -ENOMEM; @@ -173,6 +191,22 @@ int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget) if (!udc) goto err1; + dev_set_name(&gadget->dev, "gadget"); + gadget->dev.parent = parent; + + dma_set_coherent_mask(&gadget->dev, parent->coherent_dma_mask); + gadget->dev.dma_parms = parent->dma_parms; + gadget->dev.dma_mask = parent->dma_mask; + + if (release) + gadget->dev.release = release; + else + gadget->dev.release = usb_udc_nop_release; + + ret = device_register(&gadget->dev); + if (ret) + goto err2; + device_initialize(&udc->dev); udc->dev.release = usb_udc_release; udc->dev.class = udc_class; @@ -180,7 +214,7 @@ int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget) udc->dev.parent = parent; ret = dev_set_name(&udc->dev, "%s", kobject_name(&parent->kobj)); if (ret) - goto err2; + goto err3; udc->gadget = gadget; @@ -189,21 +223,42 @@ int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget) ret = device_add(&udc->dev); if (ret) - goto err3; + goto err4; + + usb_gadget_set_state(gadget, USB_STATE_NOTATTACHED); mutex_unlock(&udc_lock); return 0; -err3: + +err4: list_del(&udc->list); mutex_unlock(&udc_lock); -err2: +err3: put_device(&udc->dev); +err2: + put_device(&gadget->dev); + kfree(udc); + err1: return ret; } +EXPORT_SYMBOL_GPL(usb_add_gadget_udc_release); + +/** + * usb_add_gadget_udc - adds a new gadget to the udc class driver list + * @parent: the parent device to this udc. Usually the controller + * driver's device. + * @gadget: the gadget to be added to the list + * + * Returns zero on success, negative errno otherwise. + */ +int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget) +{ + return usb_add_gadget_udc_release(parent, gadget, NULL); +} EXPORT_SYMBOL_GPL(usb_add_gadget_udc); static void usb_gadget_remove_driver(struct usb_udc *udc) @@ -220,6 +275,7 @@ static void usb_gadget_remove_driver(struct usb_udc *udc) udc->driver = NULL; udc->dev.driver = NULL; + udc->gadget->dev.driver = NULL; } /** @@ -254,6 +310,7 @@ found: kobject_uevent(&udc->dev.kobj, KOBJ_REMOVE); device_unregister(&udc->dev); + device_unregister(&gadget->dev); } EXPORT_SYMBOL_GPL(usb_del_gadget_udc); @@ -268,6 +325,7 @@ static int udc_bind_to_driver(struct usb_udc *udc, struct usb_gadget_driver *dri udc->driver = driver; udc->dev.driver = &driver->driver; + udc->gadget->dev.driver = &driver->driver; ret = driver->bind(udc->gadget, driver); if (ret) @@ -286,6 +344,7 @@ err1: udc->driver->function, ret); udc->driver = NULL; udc->dev.driver = NULL; + udc->gadget->dev.driver = NULL; return ret; } @@ -395,6 +454,16 @@ static ssize_t usb_udc_softconn_store(struct device *dev, } static DEVICE_ATTR(soft_connect, S_IWUSR, NULL, usb_udc_softconn_store); +static ssize_t usb_gadget_state_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_udc *udc = container_of(dev, struct usb_udc, dev); + struct usb_gadget *gadget = udc->gadget; + + return sprintf(buf, "%s\n", usb_state_string(gadget->state)); +} +static DEVICE_ATTR(state, S_IRUGO, usb_gadget_state_show, NULL); + #define USB_UDC_SPEED_ATTR(name, param) \ ssize_t usb_udc_##param##_show(struct device *dev, \ struct device_attribute *attr, char *buf) \ @@ -403,7 +472,7 @@ ssize_t usb_udc_##param##_show(struct device *dev, \ return snprintf(buf, PAGE_SIZE, "%s\n", \ usb_speed_string(udc->gadget->param)); \ } \ -static DEVICE_ATTR(name, S_IRUSR, usb_udc_##param##_show, NULL) +static DEVICE_ATTR(name, S_IRUGO, usb_udc_##param##_show, NULL) static USB_UDC_SPEED_ATTR(current_speed, speed); static USB_UDC_SPEED_ATTR(maximum_speed, max_speed); @@ -428,6 +497,7 @@ static USB_UDC_ATTR(a_alt_hnp_support); static struct attribute *usb_udc_attrs[] = { &dev_attr_srp.attr, &dev_attr_soft_connect.attr, + &dev_attr_state.attr, &dev_attr_current_speed.attr, &dev_attr_maximum_speed.attr, diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h index 93b0c1191115..817e9e19cecf 100644 --- a/drivers/usb/gadget/uvc.h +++ b/drivers/usb/gadget/uvc.h @@ -98,8 +98,6 @@ extern unsigned int uvc_gadget_trace_param; #define DRIVER_VERSION "0.1.0" #define DRIVER_VERSION_NUMBER KERNEL_VERSION(0, 1, 0) -#define DMA_ADDR_INVALID (~(dma_addr_t)0) - #define UVC_NUM_REQUESTS 4 #define UVC_MAX_REQUEST_SIZE 64 #define UVC_MAX_EVENTS 4 @@ -190,6 +188,7 @@ struct uvc_file_handle * Functions */ +extern void uvc_function_setup_continue(struct uvc_device *uvc); extern void uvc_endpoint_stream(struct uvc_device *dev); extern void uvc_function_connect(struct uvc_device *uvc); diff --git a/drivers/usb/gadget/uvc_queue.c b/drivers/usb/gadget/uvc_queue.c index 104ae9c81251..7ce27e35550b 100644 --- a/drivers/usb/gadget/uvc_queue.c +++ b/drivers/usb/gadget/uvc_queue.c @@ -10,6 +10,7 @@ * (at your option) any later version. */ +#include <linux/atomic.h> #include <linux/kernel.h> #include <linux/mm.h> #include <linux/list.h> @@ -18,7 +19,8 @@ #include <linux/videodev2.h> #include <linux/vmalloc.h> #include <linux/wait.h> -#include <linux/atomic.h> + +#include <media/videobuf2-vmalloc.h> #include "uvc.h" @@ -28,330 +30,175 @@ * Video queues is initialized by uvc_queue_init(). The function performs * basic initialization of the uvc_video_queue struct and never fails. * - * Video buffer allocation and freeing are performed by uvc_alloc_buffers and - * uvc_free_buffers respectively. The former acquires the video queue lock, - * while the later must be called with the lock held (so that allocation can - * free previously allocated buffers). Trying to free buffers that are mapped - * to user space will return -EBUSY. - * - * Video buffers are managed using two queues. However, unlike most USB video - * drivers that use an in queue and an out queue, we use a main queue to hold - * all queued buffers (both 'empty' and 'done' buffers), and an irq queue to - * hold empty buffers. This design (copied from video-buf) minimizes locking - * in interrupt, as only one queue is shared between interrupt and user - * contexts. - * - * Use cases - * --------- - * - * Unless stated otherwise, all operations that modify the irq buffers queue - * are protected by the irq spinlock. - * - * 1. The user queues the buffers, starts streaming and dequeues a buffer. - * - * The buffers are added to the main and irq queues. Both operations are - * protected by the queue lock, and the later is protected by the irq - * spinlock as well. - * - * The completion handler fetches a buffer from the irq queue and fills it - * with video data. If no buffer is available (irq queue empty), the handler - * returns immediately. - * - * When the buffer is full, the completion handler removes it from the irq - * queue, marks it as ready (UVC_BUF_STATE_DONE) and wakes its wait queue. - * At that point, any process waiting on the buffer will be woken up. If a - * process tries to dequeue a buffer after it has been marked ready, the - * dequeing will succeed immediately. - * - * 2. Buffers are queued, user is waiting on a buffer and the device gets - * disconnected. - * - * When the device is disconnected, the kernel calls the completion handler - * with an appropriate status code. The handler marks all buffers in the - * irq queue as being erroneous (UVC_BUF_STATE_ERROR) and wakes them up so - * that any process waiting on a buffer gets woken up. - * - * Waking up up the first buffer on the irq list is not enough, as the - * process waiting on the buffer might restart the dequeue operation - * immediately. - * + * Video buffers are managed by videobuf2. The driver uses a mutex to protect + * the videobuf2 queue operations by serializing calls to videobuf2 and a + * spinlock to protect the IRQ queue that holds the buffers to be processed by + * the driver. */ -static void -uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type) -{ - mutex_init(&queue->mutex); - spin_lock_init(&queue->irqlock); - INIT_LIST_HEAD(&queue->mainqueue); - INIT_LIST_HEAD(&queue->irqqueue); - queue->type = type; -} - -/* - * Free the video buffers. - * - * This function must be called with the queue lock held. +/* ----------------------------------------------------------------------------- + * videobuf2 queue operations */ -static int uvc_free_buffers(struct uvc_video_queue *queue) + +static int uvc_queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], void *alloc_ctxs[]) { - unsigned int i; + struct uvc_video_queue *queue = vb2_get_drv_priv(vq); + struct uvc_video *video = container_of(queue, struct uvc_video, queue); - for (i = 0; i < queue->count; ++i) { - if (queue->buffer[i].vma_use_count != 0) - return -EBUSY; - } + if (*nbuffers > UVC_MAX_VIDEO_BUFFERS) + *nbuffers = UVC_MAX_VIDEO_BUFFERS; - if (queue->count) { - vfree(queue->mem); - queue->count = 0; - } + *nplanes = 1; + + sizes[0] = video->imagesize; return 0; } -/* - * Allocate the video buffers. - * - * Pages are reserved to make sure they will not be swapped, as they will be - * filled in the URB completion handler. - * - * Buffers will be individually mapped, so they must all be page aligned. - */ -static int -uvc_alloc_buffers(struct uvc_video_queue *queue, unsigned int nbuffers, - unsigned int buflength) +static int uvc_buffer_prepare(struct vb2_buffer *vb) { - unsigned int bufsize = PAGE_ALIGN(buflength); - unsigned int i; - void *mem = NULL; - int ret; + struct uvc_video_queue *queue = vb2_get_drv_priv(vb->vb2_queue); + struct uvc_buffer *buf = container_of(vb, struct uvc_buffer, buf); - if (nbuffers > UVC_MAX_VIDEO_BUFFERS) - nbuffers = UVC_MAX_VIDEO_BUFFERS; + if (vb->v4l2_buf.type == V4L2_BUF_TYPE_VIDEO_OUTPUT && + vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0)) { + uvc_trace(UVC_TRACE_CAPTURE, "[E] Bytes used out of bounds.\n"); + return -EINVAL; + } - mutex_lock(&queue->mutex); + if (unlikely(queue->flags & UVC_QUEUE_DISCONNECTED)) + return -ENODEV; - if ((ret = uvc_free_buffers(queue)) < 0) - goto done; + buf->state = UVC_BUF_STATE_QUEUED; + buf->mem = vb2_plane_vaddr(vb, 0); + buf->length = vb2_plane_size(vb, 0); + if (vb->v4l2_buf.type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + buf->bytesused = 0; + else + buf->bytesused = vb2_get_plane_payload(vb, 0); - /* Bail out if no buffers should be allocated. */ - if (nbuffers == 0) - goto done; + return 0; +} - /* Decrement the number of buffers until allocation succeeds. */ - for (; nbuffers > 0; --nbuffers) { - mem = vmalloc_32(nbuffers * bufsize); - if (mem != NULL) - break; - } +static void uvc_buffer_queue(struct vb2_buffer *vb) +{ + struct uvc_video_queue *queue = vb2_get_drv_priv(vb->vb2_queue); + struct uvc_buffer *buf = container_of(vb, struct uvc_buffer, buf); + unsigned long flags; - if (mem == NULL) { - ret = -ENOMEM; - goto done; - } + spin_lock_irqsave(&queue->irqlock, flags); - for (i = 0; i < nbuffers; ++i) { - memset(&queue->buffer[i], 0, sizeof queue->buffer[i]); - queue->buffer[i].buf.index = i; - queue->buffer[i].buf.m.offset = i * bufsize; - queue->buffer[i].buf.length = buflength; - queue->buffer[i].buf.type = queue->type; - queue->buffer[i].buf.sequence = 0; - queue->buffer[i].buf.field = V4L2_FIELD_NONE; - queue->buffer[i].buf.memory = V4L2_MEMORY_MMAP; - queue->buffer[i].buf.flags = 0; - init_waitqueue_head(&queue->buffer[i].wait); + if (likely(!(queue->flags & UVC_QUEUE_DISCONNECTED))) { + list_add_tail(&buf->queue, &queue->irqqueue); + } else { + /* If the device is disconnected return the buffer to userspace + * directly. The next QBUF call will fail with -ENODEV. + */ + buf->state = UVC_BUF_STATE_ERROR; + vb2_buffer_done(&buf->buf, VB2_BUF_STATE_ERROR); } - queue->mem = mem; - queue->count = nbuffers; - queue->buf_size = bufsize; - ret = nbuffers; - -done: - mutex_unlock(&queue->mutex); - return ret; + spin_unlock_irqrestore(&queue->irqlock, flags); } -static void __uvc_query_buffer(struct uvc_buffer *buf, - struct v4l2_buffer *v4l2_buf) -{ - memcpy(v4l2_buf, &buf->buf, sizeof *v4l2_buf); - - if (buf->vma_use_count) - v4l2_buf->flags |= V4L2_BUF_FLAG_MAPPED; - - switch (buf->state) { - case UVC_BUF_STATE_ERROR: - case UVC_BUF_STATE_DONE: - v4l2_buf->flags |= V4L2_BUF_FLAG_DONE; - break; - case UVC_BUF_STATE_QUEUED: - case UVC_BUF_STATE_ACTIVE: - v4l2_buf->flags |= V4L2_BUF_FLAG_QUEUED; - break; - case UVC_BUF_STATE_IDLE: - default: - break; - } -} +static struct vb2_ops uvc_queue_qops = { + .queue_setup = uvc_queue_setup, + .buf_prepare = uvc_buffer_prepare, + .buf_queue = uvc_buffer_queue, +}; -static int -uvc_query_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *v4l2_buf) +static int uvc_queue_init(struct uvc_video_queue *queue, + enum v4l2_buf_type type) { - int ret = 0; + int ret; - mutex_lock(&queue->mutex); - if (v4l2_buf->index >= queue->count) { - ret = -EINVAL; - goto done; - } + queue->queue.type = type; + queue->queue.io_modes = VB2_MMAP | VB2_USERPTR; + queue->queue.drv_priv = queue; + queue->queue.buf_struct_size = sizeof(struct uvc_buffer); + queue->queue.ops = &uvc_queue_qops; + queue->queue.mem_ops = &vb2_vmalloc_memops; + ret = vb2_queue_init(&queue->queue); + if (ret) + return ret; + + mutex_init(&queue->mutex); + spin_lock_init(&queue->irqlock); + INIT_LIST_HEAD(&queue->irqqueue); + queue->flags = 0; - __uvc_query_buffer(&queue->buffer[v4l2_buf->index], v4l2_buf); + return 0; +} -done: +/* + * Free the video buffers. + */ +static void uvc_free_buffers(struct uvc_video_queue *queue) +{ + mutex_lock(&queue->mutex); + vb2_queue_release(&queue->queue); mutex_unlock(&queue->mutex); - return ret; } /* - * Queue a video buffer. Attempting to queue a buffer that has already been - * queued will return -EINVAL. + * Allocate the video buffers. */ -static int -uvc_queue_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *v4l2_buf) +static int uvc_alloc_buffers(struct uvc_video_queue *queue, + struct v4l2_requestbuffers *rb) { - struct uvc_buffer *buf; - unsigned long flags; - int ret = 0; + int ret; - uvc_trace(UVC_TRACE_CAPTURE, "Queuing buffer %u.\n", v4l2_buf->index); + mutex_lock(&queue->mutex); + ret = vb2_reqbufs(&queue->queue, rb); + mutex_unlock(&queue->mutex); - if (v4l2_buf->type != queue->type || - v4l2_buf->memory != V4L2_MEMORY_MMAP) { - uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer type (%u) " - "and/or memory (%u).\n", v4l2_buf->type, - v4l2_buf->memory); - return -EINVAL; - } + return ret ? ret : rb->count; +} - mutex_lock(&queue->mutex); - if (v4l2_buf->index >= queue->count) { - uvc_trace(UVC_TRACE_CAPTURE, "[E] Out of range index.\n"); - ret = -EINVAL; - goto done; - } +static int uvc_query_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *buf) +{ + int ret; - buf = &queue->buffer[v4l2_buf->index]; - if (buf->state != UVC_BUF_STATE_IDLE) { - uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state " - "(%u).\n", buf->state); - ret = -EINVAL; - goto done; - } + mutex_lock(&queue->mutex); + ret = vb2_querybuf(&queue->queue, buf); + mutex_unlock(&queue->mutex); - if (v4l2_buf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT && - v4l2_buf->bytesused > buf->buf.length) { - uvc_trace(UVC_TRACE_CAPTURE, "[E] Bytes used out of bounds.\n"); - ret = -EINVAL; - goto done; - } + return ret; +} - if (v4l2_buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) - buf->buf.bytesused = 0; - else - buf->buf.bytesused = v4l2_buf->bytesused; +static int uvc_queue_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *buf) +{ + unsigned long flags; + int ret; + mutex_lock(&queue->mutex); + ret = vb2_qbuf(&queue->queue, buf); spin_lock_irqsave(&queue->irqlock, flags); - if (queue->flags & UVC_QUEUE_DISCONNECTED) { - spin_unlock_irqrestore(&queue->irqlock, flags); - ret = -ENODEV; - goto done; - } - buf->state = UVC_BUF_STATE_QUEUED; - ret = (queue->flags & UVC_QUEUE_PAUSED) != 0; queue->flags &= ~UVC_QUEUE_PAUSED; - - list_add_tail(&buf->stream, &queue->mainqueue); - list_add_tail(&buf->queue, &queue->irqqueue); spin_unlock_irqrestore(&queue->irqlock, flags); - -done: mutex_unlock(&queue->mutex); - return ret; -} -static int uvc_queue_waiton(struct uvc_buffer *buf, int nonblocking) -{ - if (nonblocking) { - return (buf->state != UVC_BUF_STATE_QUEUED && - buf->state != UVC_BUF_STATE_ACTIVE) - ? 0 : -EAGAIN; - } - - return wait_event_interruptible(buf->wait, - buf->state != UVC_BUF_STATE_QUEUED && - buf->state != UVC_BUF_STATE_ACTIVE); + return ret; } /* * Dequeue a video buffer. If nonblocking is false, block until a buffer is * available. */ -static int -uvc_dequeue_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *v4l2_buf, - int nonblocking) +static int uvc_dequeue_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *buf, int nonblocking) { - struct uvc_buffer *buf; - int ret = 0; - - if (v4l2_buf->type != queue->type || - v4l2_buf->memory != V4L2_MEMORY_MMAP) { - uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer type (%u) " - "and/or memory (%u).\n", v4l2_buf->type, - v4l2_buf->memory); - return -EINVAL; - } + int ret; mutex_lock(&queue->mutex); - if (list_empty(&queue->mainqueue)) { - uvc_trace(UVC_TRACE_CAPTURE, "[E] Empty buffer queue.\n"); - ret = -EINVAL; - goto done; - } - - buf = list_first_entry(&queue->mainqueue, struct uvc_buffer, stream); - if ((ret = uvc_queue_waiton(buf, nonblocking)) < 0) - goto done; - - uvc_trace(UVC_TRACE_CAPTURE, "Dequeuing buffer %u (%u, %u bytes).\n", - buf->buf.index, buf->state, buf->buf.bytesused); - - switch (buf->state) { - case UVC_BUF_STATE_ERROR: - uvc_trace(UVC_TRACE_CAPTURE, "[W] Corrupted data " - "(transmission error).\n"); - ret = -EIO; - case UVC_BUF_STATE_DONE: - buf->state = UVC_BUF_STATE_IDLE; - break; - - case UVC_BUF_STATE_IDLE: - case UVC_BUF_STATE_QUEUED: - case UVC_BUF_STATE_ACTIVE: - default: - uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state %u " - "(driver bug?).\n", buf->state); - ret = -EINVAL; - goto done; - } - - list_del(&buf->stream); - __uvc_query_buffer(buf, v4l2_buf); - -done: + ret = vb2_dqbuf(&queue->queue, buf, nonblocking); mutex_unlock(&queue->mutex); + return ret; } @@ -361,105 +208,47 @@ done: * This function implements video queue polling and is intended to be used by * the device poll handler. */ -static unsigned int -uvc_queue_poll(struct uvc_video_queue *queue, struct file *file, - poll_table *wait) +static unsigned int uvc_queue_poll(struct uvc_video_queue *queue, + struct file *file, poll_table *wait) { - struct uvc_buffer *buf; - unsigned int mask = 0; + unsigned int ret; mutex_lock(&queue->mutex); - if (list_empty(&queue->mainqueue)) - goto done; - - buf = list_first_entry(&queue->mainqueue, struct uvc_buffer, stream); - - poll_wait(file, &buf->wait, wait); - if (buf->state == UVC_BUF_STATE_DONE || - buf->state == UVC_BUF_STATE_ERROR) - mask |= POLLOUT | POLLWRNORM; - -done: + ret = vb2_poll(&queue->queue, file, wait); mutex_unlock(&queue->mutex); - return mask; -} -/* - * VMA operations. - */ -static void uvc_vm_open(struct vm_area_struct *vma) -{ - struct uvc_buffer *buffer = vma->vm_private_data; - buffer->vma_use_count++; + return ret; } -static void uvc_vm_close(struct vm_area_struct *vma) +static int uvc_queue_mmap(struct uvc_video_queue *queue, + struct vm_area_struct *vma) { - struct uvc_buffer *buffer = vma->vm_private_data; - buffer->vma_use_count--; -} + int ret; -static struct vm_operations_struct uvc_vm_ops = { - .open = uvc_vm_open, - .close = uvc_vm_close, -}; + mutex_lock(&queue->mutex); + ret = vb2_mmap(&queue->queue, vma); + mutex_unlock(&queue->mutex); + + return ret; +} +#ifndef CONFIG_MMU /* - * Memory-map a buffer. + * Get unmapped area. * - * This function implements video buffer memory mapping and is intended to be - * used by the device mmap handler. + * NO-MMU arch need this function to make mmap() work correctly. */ -static int -uvc_queue_mmap(struct uvc_video_queue *queue, struct vm_area_struct *vma) +static unsigned long uvc_queue_get_unmapped_area(struct uvc_video_queue *queue, + unsigned long pgoff) { - struct uvc_buffer *uninitialized_var(buffer); - struct page *page; - unsigned long addr, start, size; - unsigned int i; - int ret = 0; - - start = vma->vm_start; - size = vma->vm_end - vma->vm_start; + unsigned long ret; mutex_lock(&queue->mutex); - - for (i = 0; i < queue->count; ++i) { - buffer = &queue->buffer[i]; - if ((buffer->buf.m.offset >> PAGE_SHIFT) == vma->vm_pgoff) - break; - } - - if (i == queue->count || size != queue->buf_size) { - ret = -EINVAL; - goto done; - } - - /* - * VM_IO marks the area as being an mmaped region for I/O to a - * device. It also prevents the region from being core dumped. - */ - vma->vm_flags |= VM_IO; - - addr = (unsigned long)queue->mem + buffer->buf.m.offset; - while (size > 0) { - page = vmalloc_to_page((void *)addr); - if ((ret = vm_insert_page(vma, start, page)) < 0) - goto done; - - start += PAGE_SIZE; - addr += PAGE_SIZE; - size -= PAGE_SIZE; - } - - vma->vm_ops = &uvc_vm_ops; - vma->vm_private_data = buffer; - uvc_vm_open(vma); - -done: + ret = vb2_get_unmapped_area(&queue->queue, 0, 0, pgoff, 0); mutex_unlock(&queue->mutex); return ret; } +#endif /* * Cancel the video buffers queue. @@ -484,7 +273,7 @@ static void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect) queue); list_del(&buf->queue); buf->state = UVC_BUF_STATE_ERROR; - wake_up(&buf->wait); + vb2_buffer_done(&buf->buf, VB2_BUF_STATE_ERROR); } /* This must be protected by the irqlock spinlock to avoid race * conditions between uvc_queue_buffer and the disconnection event that @@ -516,26 +305,33 @@ static void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect) */ static int uvc_queue_enable(struct uvc_video_queue *queue, int enable) { - unsigned int i; + unsigned long flags; int ret = 0; mutex_lock(&queue->mutex); if (enable) { - if (uvc_queue_streaming(queue)) { - ret = -EBUSY; + ret = vb2_streamon(&queue->queue, queue->queue.type); + if (ret < 0) goto done; - } + queue->sequence = 0; - queue->flags |= UVC_QUEUE_STREAMING; queue->buf_used = 0; } else { - uvc_queue_cancel(queue, 0); - INIT_LIST_HEAD(&queue->mainqueue); + ret = vb2_streamoff(&queue->queue, queue->queue.type); + if (ret < 0) + goto done; - for (i = 0; i < queue->count; ++i) - queue->buffer[i].state = UVC_BUF_STATE_IDLE; + spin_lock_irqsave(&queue->irqlock, flags); + INIT_LIST_HEAD(&queue->irqqueue); - queue->flags &= ~UVC_QUEUE_STREAMING; + /* + * FIXME: We need to clear the DISCONNECTED flag to ensure that + * applications will be able to queue buffers for the next + * streaming run. However, clearing it here doesn't guarantee + * that the device will be reconnected in the meantime. + */ + queue->flags &= ~UVC_QUEUE_DISCONNECTED; + spin_unlock_irqrestore(&queue->irqlock, flags); } done: @@ -544,15 +340,15 @@ done: } /* called with &queue_irqlock held.. */ -static struct uvc_buffer * -uvc_queue_next_buffer(struct uvc_video_queue *queue, struct uvc_buffer *buf) +static struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue, + struct uvc_buffer *buf) { struct uvc_buffer *nextbuf; if ((queue->flags & UVC_QUEUE_DROP_INCOMPLETE) && - buf->buf.length != buf->buf.bytesused) { + buf->length != buf->bytesused) { buf->state = UVC_BUF_STATE_QUEUED; - buf->buf.bytesused = 0; + vb2_set_plane_payload(&buf->buf, 0, 0); return buf; } @@ -563,10 +359,18 @@ uvc_queue_next_buffer(struct uvc_video_queue *queue, struct uvc_buffer *buf) else nextbuf = NULL; - buf->buf.sequence = queue->sequence++; - do_gettimeofday(&buf->buf.timestamp); + /* + * FIXME: with videobuf2, the sequence number or timestamp fields + * are valid only for video capture devices and the UVC gadget usually + * is a video output device. Keeping these until the specs are clear on + * this aspect. + */ + buf->buf.v4l2_buf.sequence = queue->sequence++; + do_gettimeofday(&buf->buf.v4l2_buf.timestamp); + + vb2_set_plane_payload(&buf->buf, 0, buf->bytesused); + vb2_buffer_done(&buf->buf, VB2_BUF_STATE_DONE); - wake_up(&buf->wait); return nextbuf; } diff --git a/drivers/usb/gadget/uvc_queue.h b/drivers/usb/gadget/uvc_queue.h index 1812a8ecc5d0..8e76ce982f1e 100644 --- a/drivers/usb/gadget/uvc_queue.h +++ b/drivers/usb/gadget/uvc_queue.h @@ -6,6 +6,7 @@ #include <linux/kernel.h> #include <linux/poll.h> #include <linux/videodev2.h> +#include <media/videobuf2-core.h> /* Maximum frame size in bytes, for sanity checking. */ #define UVC_MAX_FRAME_SIZE (16*1024*1024) @@ -25,42 +26,35 @@ enum uvc_buffer_state { }; struct uvc_buffer { - unsigned long vma_use_count; - struct list_head stream; - - /* Touched by interrupt handler. */ - struct v4l2_buffer buf; + struct vb2_buffer buf; struct list_head queue; - wait_queue_head_t wait; + enum uvc_buffer_state state; + void *mem; + unsigned int length; + unsigned int bytesused; }; -#define UVC_QUEUE_STREAMING (1 << 0) -#define UVC_QUEUE_DISCONNECTED (1 << 1) -#define UVC_QUEUE_DROP_INCOMPLETE (1 << 2) -#define UVC_QUEUE_PAUSED (1 << 3) +#define UVC_QUEUE_DISCONNECTED (1 << 0) +#define UVC_QUEUE_DROP_INCOMPLETE (1 << 1) +#define UVC_QUEUE_PAUSED (1 << 2) struct uvc_video_queue { - enum v4l2_buf_type type; + struct vb2_queue queue; + struct mutex mutex; /* Protects queue */ - void *mem; unsigned int flags; __u32 sequence; - unsigned int count; - unsigned int buf_size; unsigned int buf_used; - struct uvc_buffer buffer[UVC_MAX_VIDEO_BUFFERS]; - struct mutex mutex; /* protects buffers and mainqueue */ - spinlock_t irqlock; /* protects irqqueue */ - struct list_head mainqueue; + spinlock_t irqlock; /* Protects flags and irqqueue */ struct list_head irqqueue; }; static inline int uvc_queue_streaming(struct uvc_video_queue *queue) { - return queue->flags & UVC_QUEUE_STREAMING; + return vb2_is_streaming(&queue->queue); } #endif /* __KERNEL__ */ diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c index 2ca9386d655b..ad48e81155e2 100644 --- a/drivers/usb/gadget/uvc_v4l2.c +++ b/drivers/usb/gadget/uvc_v4l2.c @@ -41,9 +41,8 @@ uvc_send_response(struct uvc_device *uvc, struct uvc_request_data *data) req->length = min_t(unsigned int, uvc->event_length, data->length); req->zero = data->length < uvc->event_length; - req->dma = DMA_ADDR_INVALID; - memcpy(req->buf, data->data, data->length); + memcpy(req->buf, data->data, req->length); return usb_ep_queue(cdev->gadget->ep0, req, GFP_KERNEL); } @@ -148,16 +147,13 @@ uvc_v4l2_release(struct file *file) uvc_function_disconnect(uvc); uvc_video_enable(video, 0); - mutex_lock(&video->queue.mutex); - if (uvc_free_buffers(&video->queue) < 0) - printk(KERN_ERR "uvc_v4l2_release: Unable to free " - "buffers.\n"); - mutex_unlock(&video->queue.mutex); + uvc_free_buffers(&video->queue); file->private_data = NULL; v4l2_fh_del(&handle->vfh); v4l2_fh_exit(&handle->vfh); kfree(handle); + return 0; } @@ -178,9 +174,9 @@ uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) struct v4l2_capability *cap = arg; memset(cap, 0, sizeof *cap); - strncpy(cap->driver, "g_uvc", sizeof(cap->driver)); - strncpy(cap->card, cdev->gadget->name, sizeof(cap->card)); - strncpy(cap->bus_info, dev_name(&cdev->gadget->dev), + strlcpy(cap->driver, "g_uvc", sizeof(cap->driver)); + strlcpy(cap->card, cdev->gadget->name, sizeof(cap->card)); + strlcpy(cap->bus_info, dev_name(&cdev->gadget->dev), sizeof cap->bus_info); cap->version = DRIVER_VERSION_NUMBER; cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING; @@ -192,7 +188,7 @@ uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) { struct v4l2_format *fmt = arg; - if (fmt->type != video->queue.type) + if (fmt->type != video->queue.queue.type) return -EINVAL; return uvc_v4l2_get_format(video, fmt); @@ -202,7 +198,7 @@ uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) { struct v4l2_format *fmt = arg; - if (fmt->type != video->queue.type) + if (fmt->type != video->queue.queue.type) return -EINVAL; return uvc_v4l2_set_format(video, fmt); @@ -213,16 +209,13 @@ uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) { struct v4l2_requestbuffers *rb = arg; - if (rb->type != video->queue.type || - rb->memory != V4L2_MEMORY_MMAP) + if (rb->type != video->queue.queue.type) return -EINVAL; - ret = uvc_alloc_buffers(&video->queue, rb->count, - video->imagesize); + ret = uvc_alloc_buffers(&video->queue, rb); if (ret < 0) return ret; - rb->count = ret; ret = 0; break; } @@ -231,9 +224,6 @@ uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) { struct v4l2_buffer *buf = arg; - if (buf->type != video->queue.type) - return -EINVAL; - return uvc_query_buffer(&video->queue, buf); } @@ -251,24 +241,36 @@ uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) { int *type = arg; - if (*type != video->queue.type) + if (*type != video->queue.queue.type) return -EINVAL; - return uvc_video_enable(video, 1); + /* Enable UVC video. */ + ret = uvc_video_enable(video, 1); + if (ret < 0) + return ret; + + /* + * Complete the alternate setting selection setup phase now that + * userspace is ready to provide video frames. + */ + uvc_function_setup_continue(uvc); + uvc->state = UVC_STATE_STREAMING; + + return 0; } case VIDIOC_STREAMOFF: { int *type = arg; - if (*type != video->queue.type) + if (*type != video->queue.queue.type) return -EINVAL; return uvc_video_enable(video, 0); } /* Events */ - case VIDIOC_DQEVENT: + case VIDIOC_DQEVENT: { struct v4l2_event *event = arg; @@ -333,17 +335,21 @@ uvc_v4l2_poll(struct file *file, poll_table *wait) { struct video_device *vdev = video_devdata(file); struct uvc_device *uvc = video_get_drvdata(vdev); - struct uvc_file_handle *handle = to_uvc_file_handle(file->private_data); - unsigned int mask = 0; - poll_wait(file, &handle->vfh.wait, wait); - if (v4l2_event_pending(&handle->vfh)) - mask |= POLLPRI; + return uvc_queue_poll(&uvc->video.queue, file, wait); +} - mask |= uvc_queue_poll(&uvc->video.queue, file, wait); +#ifndef CONFIG_MMU +static unsigned long uvc_v4l2_get_unmapped_area(struct file *file, + unsigned long addr, unsigned long len, unsigned long pgoff, + unsigned long flags) +{ + struct video_device *vdev = video_devdata(file); + struct uvc_device *uvc = video_get_drvdata(vdev); - return mask; + return uvc_queue_get_unmapped_area(&uvc->video.queue, pgoff); } +#endif static struct v4l2_file_operations uvc_v4l2_fops = { .owner = THIS_MODULE, @@ -352,5 +358,8 @@ static struct v4l2_file_operations uvc_v4l2_fops = { .ioctl = uvc_v4l2_ioctl, .mmap = uvc_v4l2_mmap, .poll = uvc_v4l2_poll, +#ifndef CONFIG_MMU + .get_unmapped_area = uvc_v4l2_get_unmapped_area, +#endif }; diff --git a/drivers/usb/gadget/uvc_video.c b/drivers/usb/gadget/uvc_video.c index b0e53a8ea4f7..71e896d4c5ae 100644 --- a/drivers/usb/gadget/uvc_video.c +++ b/drivers/usb/gadget/uvc_video.c @@ -32,7 +32,7 @@ uvc_video_encode_header(struct uvc_video *video, struct uvc_buffer *buf, data[0] = 2; data[1] = UVC_STREAM_EOH | video->fid; - if (buf->buf.bytesused - video->queue.buf_used <= len - 2) + if (buf->bytesused - video->queue.buf_used <= len - 2) data[1] |= UVC_STREAM_EOF; return 2; @@ -47,8 +47,8 @@ uvc_video_encode_data(struct uvc_video *video, struct uvc_buffer *buf, void *mem; /* Copy video data to the USB buffer. */ - mem = queue->mem + buf->buf.m.offset + queue->buf_used; - nbytes = min((unsigned int)len, buf->buf.bytesused - queue->buf_used); + mem = buf->mem + queue->buf_used; + nbytes = min((unsigned int)len, buf->bytesused - queue->buf_used); memcpy(data, mem, nbytes); queue->buf_used += nbytes; @@ -82,7 +82,7 @@ uvc_video_encode_bulk(struct usb_request *req, struct uvc_video *video, req->length = video->req_size - len; req->zero = video->payload_size == video->max_payload_size; - if (buf->buf.bytesused == video->queue.buf_used) { + if (buf->bytesused == video->queue.buf_used) { video->queue.buf_used = 0; buf->state = UVC_BUF_STATE_DONE; uvc_queue_next_buffer(&video->queue, buf); @@ -92,7 +92,7 @@ uvc_video_encode_bulk(struct usb_request *req, struct uvc_video *video, } if (video->payload_size == video->max_payload_size || - buf->buf.bytesused == video->queue.buf_used) + buf->bytesused == video->queue.buf_used) video->payload_size = 0; } @@ -115,7 +115,7 @@ uvc_video_encode_isoc(struct usb_request *req, struct uvc_video *video, req->length = video->req_size - len; - if (buf->buf.bytesused == video->queue.buf_used) { + if (buf->bytesused == video->queue.buf_used) { video->queue.buf_used = 0; buf->state = UVC_BUF_STATE_DONE; uvc_queue_next_buffer(&video->queue, buf); @@ -161,6 +161,7 @@ static void uvc_video_complete(struct usb_ep *ep, struct usb_request *req) { struct uvc_video *video = req->context; + struct uvc_video_queue *queue = &video->queue; struct uvc_buffer *buf; unsigned long flags; int ret; @@ -169,13 +170,15 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req) case 0: break; - case -ESHUTDOWN: + case -ESHUTDOWN: /* disconnect from host. */ printk(KERN_INFO "VS request cancelled.\n"); + uvc_queue_cancel(queue, 1); goto requeue; default: printk(KERN_INFO "VS request completed with status %d.\n", req->status); + uvc_queue_cancel(queue, 0); goto requeue; } @@ -229,13 +232,18 @@ uvc_video_free_requests(struct uvc_video *video) static int uvc_video_alloc_requests(struct uvc_video *video) { + unsigned int req_size; unsigned int i; int ret = -ENOMEM; BUG_ON(video->req_size); + req_size = video->ep->maxpacket + * max_t(unsigned int, video->ep->maxburst, 1) + * (video->ep->mult + 1); + for (i = 0; i < UVC_NUM_REQUESTS; ++i) { - video->req_buffer[i] = kmalloc(video->ep->maxpacket, GFP_KERNEL); + video->req_buffer[i] = kmalloc(req_size, GFP_KERNEL); if (video->req_buffer[i] == NULL) goto error; @@ -245,14 +253,14 @@ uvc_video_alloc_requests(struct uvc_video *video) video->req[i]->buf = video->req_buffer[i]; video->req[i]->length = 0; - video->req[i]->dma = DMA_ADDR_INVALID; video->req[i]->complete = uvc_video_complete; video->req[i]->context = video; list_add_tail(&video->req[i]->list, &video->req_free); } - video->req_size = video->ep->maxpacket; + video->req_size = req_size; + return 0; error: @@ -309,7 +317,8 @@ uvc_video_pump(struct uvc_video *video) video->encode(req, video, buf); /* Queue the USB request */ - if ((ret = usb_ep_queue(video->ep, req, GFP_KERNEL)) < 0) { + ret = usb_ep_queue(video->ep, req, GFP_ATOMIC); + if (ret < 0) { printk(KERN_INFO "Failed to queue request (%d)\n", ret); usb_ep_set_halt(video->ep); spin_unlock_irqrestore(&video->queue.irqlock, flags); diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 685fa681cb65..2cd6262e8b71 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -368,8 +368,10 @@ static int zero_unbind(struct usb_composite_dev *cdev) del_timer_sync(&autoresume_timer); if (!IS_ERR_OR_NULL(func_ss)) usb_put_function(func_ss); + usb_put_function_instance(func_inst_ss); if (!IS_ERR_OR_NULL(func_lb)) usb_put_function(func_lb); + usb_put_function_instance(func_inst_lb); return 0; } diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index c59a1126926f..de94f2699063 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -2,11 +2,9 @@ # USB Host Controller Drivers # comment "USB Host Controller Drivers" - depends on USB config USB_C67X00_HCD tristate "Cypress C67x00 HCD support" - depends on USB help The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role host/peripheral/OTG USB controllers. @@ -19,7 +17,7 @@ config USB_C67X00_HCD config USB_XHCI_HCD tristate "xHCI HCD (USB 3.0) support" - depends on USB && USB_ARCH_HAS_XHCI + depends on USB_ARCH_HAS_XHCI ---help--- The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0 "SuperSpeed" host controller hardware. @@ -27,13 +25,13 @@ config USB_XHCI_HCD To compile this driver as a module, choose M here: the module will be called xhci-hcd. +if USB_XHCI_HCD + config USB_XHCI_PLATFORM tristate - depends on USB_XHCI_HCD config USB_XHCI_HCD_DEBUGGING bool "Debugging for the xHCI host controller" - depends on USB_XHCI_HCD ---help--- Say 'Y' to turn on debugging for the xHCI host controller driver. This will spew debugging output, even in interrupt context. @@ -41,9 +39,11 @@ config USB_XHCI_HCD_DEBUGGING If unsure, say N. +endif # USB_XHCI_HCD + config USB_EHCI_HCD tristate "EHCI HCD (USB 2.0) support" - depends on USB && USB_ARCH_HAS_EHCI + depends on USB_ARCH_HAS_EHCI ---help--- The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. @@ -95,14 +95,19 @@ config USB_EHCI_TT_NEWSCHED If unsure, say Y. +config USB_FSL_MPH_DR_OF + tristate + +if USB_EHCI_HCD + config USB_EHCI_PCI tristate - depends on USB_EHCI_HCD && PCI + depends on PCI default y config USB_EHCI_HCD_PMC_MSP tristate "EHCI support for on-chip PMC MSP71xx USB controller" - depends on USB_EHCI_HCD && MSP_HAS_USB + depends on MSP_HAS_USB default n select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO @@ -112,22 +117,13 @@ config USB_EHCI_HCD_PMC_MSP config USB_EHCI_BIG_ENDIAN_MMIO bool - depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || \ - ARCH_IXP4XX || XPS_USB_HCD_XILINX || \ - PPC_MPC512x || CPU_CAVIUM_OCTEON || \ - PMC_MSP || SPARC_LEON || MIPS_SEAD3) - default y config USB_EHCI_BIG_ENDIAN_DESC bool - depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || XPS_USB_HCD_XILINX || \ - PPC_MPC512x || PMC_MSP || SPARC_LEON || \ - MIPS_SEAD3) - default y config XPS_USB_HCD_XILINX bool "Use Xilinx usb host EHCI controller core" - depends on USB_EHCI_HCD && (PPC32 || MICROBLAZE) + depends on (PPC32 || MICROBLAZE) select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO ---help--- @@ -136,12 +132,9 @@ config XPS_USB_HCD_XILINX support both high speed and full speed devices, or high speed devices only. -config USB_FSL_MPH_DR_OF - tristate - config USB_EHCI_FSL bool "Support for Freescale PPC on-chip EHCI USB controller" - depends on USB_EHCI_HCD && FSL_SOC + depends on FSL_SOC select USB_EHCI_ROOT_HUB_TT select USB_FSL_MPH_DR_OF if OF ---help--- @@ -149,22 +142,53 @@ config USB_EHCI_FSL config USB_EHCI_MXC tristate "Support for Freescale i.MX on-chip EHCI USB controller" - depends on USB_EHCI_HCD && ARCH_MXC + depends on ARCH_MXC select USB_EHCI_ROOT_HUB_TT ---help--- Variation of ARC USB block used in some Freescale chips. config USB_EHCI_HCD_OMAP - bool "EHCI support for OMAP3 and later chips" - depends on USB_EHCI_HCD && ARCH_OMAP + tristate "EHCI support for OMAP3 and later chips" + depends on ARCH_OMAP default y ---help--- Enables support for the on-chip EHCI controller on OMAP3 and later chips. + If your system uses a PHY on the USB port, you will need to + enable USB_PHY and the appropriate PHY driver as well. Most + boards need the NOP_USB_XCEIV PHY driver. + +config USB_EHCI_HCD_ORION + tristate "Support for Marvell EBU on-chip EHCI USB controller" + depends on USB_EHCI_HCD && PLAT_ORION + default y + ---help--- + Enables support for the on-chip EHCI controller on Marvell's + embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP, + Armada 370. This is different from the EHCI implementation + on Marvell's mobile PXA and MMP SoC, see "EHCI support for + Marvell PXA/MMP USB controller" for those. + +config USB_EHCI_HCD_SPEAR + tristate "Support for ST SPEAr on-chip EHCI USB controller" + depends on USB_EHCI_HCD && PLAT_SPEAR + default y + ---help--- + Enables support for the on-chip EHCI controller on + ST SPEAr chips. + +config USB_EHCI_HCD_AT91 + tristate "Support for Atmel on-chip EHCI USB controller" + depends on USB_EHCI_HCD && ARCH_AT91 + default y + ---help--- + Enables support for the on-chip EHCI controller on + Atmel chips. config USB_EHCI_MSM - bool "Support for MSM on-chip EHCI USB controller" - depends on USB_EHCI_HCD && ARCH_MSM + tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller" + depends on ARCH_MSM + depends on USB_PHY select USB_EHCI_ROOT_HUB_TT select USB_MSM_OTG ---help--- @@ -177,15 +201,16 @@ config USB_EHCI_MSM config USB_EHCI_TEGRA boolean "NVIDIA Tegra HCD support" - depends on USB_EHCI_HCD && ARCH_TEGRA + depends on ARCH_TEGRA select USB_EHCI_ROOT_HUB_TT + select USB_PHY help This driver enables support for the internal USB Host Controllers found in NVIDIA Tegra SoCs. The controllers are EHCI compliant. config USB_EHCI_HCD_PPC_OF bool "EHCI support for PPC USB controller on OF platform bus" - depends on USB_EHCI_HCD && PPC_OF + depends on PPC_OF default y ---help--- Enables support for the USB controller present on the PowerPC @@ -193,35 +218,40 @@ config USB_EHCI_HCD_PPC_OF config USB_EHCI_SH bool "EHCI support for SuperH USB controller" - depends on USB_EHCI_HCD && SUPERH + depends on SUPERH ---help--- Enables support for the on-chip EHCI controller on the SuperH. If you use the PCI EHCI controller, this option is not necessary. config USB_EHCI_S5P - boolean "S5P EHCI support" - depends on USB_EHCI_HCD && PLAT_S5P + tristate "EHCI support for Samsung S5P/EXYNOS SoC Series" + depends on PLAT_S5P help - Enable support for the S5P SOC's on-chip EHCI controller. + Enable support for the Samsung S5Pxxxx and Exynos3/4/5 SOC's + on-chip EHCI controller. config USB_EHCI_MV - bool "EHCI support for Marvell on-chip controller" - depends on USB_EHCI_HCD && (ARCH_PXA || ARCH_MMP) + bool "EHCI support for Marvell PXA/MMP USB controller" + depends on (ARCH_PXA || ARCH_MMP) select USB_EHCI_ROOT_HUB_TT ---help--- Enables support for Marvell (including PXA and MMP series) on-chip USB SPH and OTG controller. SPH is a single port host, and it can only be EHCI host. OTG is controller that can switch to host mode. + Note that this driver will not work on Marvell's other EHCI + controller used by the EBU-type SoCs including Orion, Kirkwood, + Dova, Armada 370 and Armada XP. See "Support for Marvell EBU + on-chip EHCI USB controller" for those. config USB_W90X900_EHCI bool "W90X900(W90P910) EHCI support" - depends on USB_EHCI_HCD && ARCH_W90X900 + depends on ARCH_W90X900 ---help--- Enables support for the W90X900 USB controller config USB_CNS3XXX_EHCI bool "Cavium CNS3XXX EHCI Module (DEPRECATED)" - depends on USB_EHCI_HCD && ARCH_CNS3XXX + depends on ARCH_CNS3XXX select USB_EHCI_HCD_PLATFORM ---help--- This option is deprecated now and the driver was removed, use @@ -233,7 +263,7 @@ config USB_CNS3XXX_EHCI config USB_EHCI_ATH79 bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)" - depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X) + depends on (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X) select USB_EHCI_ROOT_HUB_TT select USB_EHCI_HCD_PLATFORM default y @@ -244,9 +274,31 @@ config USB_EHCI_ATH79 Enables support for the built-in EHCI controller present on the Atheros AR7XXX/AR9XXX SoCs. +config USB_EHCI_HCD_PLATFORM + tristate "Generic EHCI driver for a platform device" + default n + ---help--- + Adds an EHCI host driver for a generic platform device, which + provides a memory space and an irq. + + If unsure, say N. + +config USB_OCTEON_EHCI + bool "Octeon on-chip EHCI support" + depends on CPU_CAVIUM_OCTEON + default n + select USB_EHCI_BIG_ENDIAN_MMIO + help + Enable support for the Octeon II SOC's on-chip EHCI + controller. It is needed for high-speed (480Mbit/sec) + USB 2.0 device support. All CN6XXX based chips with USB are + supported. + +endif # USB_EHCI_HCD + config USB_OXU210HP_HCD tristate "OXU210HP HCD support" - depends on USB && GENERIC_HARDIRQS + depends on GENERIC_HARDIRQS ---help--- The OXU210HP is an USB host/OTG/device controller. Enable this option if your board has this chip. If unsure, say N. @@ -259,7 +311,6 @@ config USB_OXU210HP_HCD config USB_ISP116X_HCD tristate "ISP116X HCD support" - depends on USB ---help--- The ISP1160 and ISP1161 chips are USB host controllers. Enable this option if your board has this chip. If unsure, say N. @@ -271,7 +322,6 @@ config USB_ISP116X_HCD config USB_ISP1760_HCD tristate "ISP 1760 HCD support" - depends on USB ---help--- The ISP1760 chip is a USB 2.0 host controller. @@ -286,7 +336,6 @@ config USB_ISP1760_HCD config USB_ISP1362_HCD tristate "ISP1362 HCD support" - depends on USB default N ---help--- Supports the Philips ISP1362 chip as a host controller @@ -298,9 +347,8 @@ config USB_ISP1362_HCD config USB_OHCI_HCD tristate "OHCI HCD support" - depends on USB && USB_ARCH_HAS_OHCI + depends on USB_ARCH_HAS_OHCI select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 - select USB_OTG_UTILS if ARCH_OMAP depends on USB_ISP1301 || !ARCH_LPC32XX ---help--- The Open Host Controller Interface (OHCI) is a standard for accessing @@ -315,16 +363,18 @@ config USB_OHCI_HCD To compile this driver as a module, choose M here: the module will be called ohci-hcd. +if USB_OHCI_HCD + config USB_OHCI_HCD_OMAP1 bool "OHCI support for OMAP1/2 chips" - depends on USB_OHCI_HCD && ARCH_OMAP1 + depends on ARCH_OMAP1 default y ---help--- Enables support for the OHCI controller on OMAP1/2 chips. config USB_OHCI_HCD_OMAP3 bool "OHCI support for OMAP3 and later chips" - depends on USB_OHCI_HCD && (ARCH_OMAP3 || ARCH_OMAP4) + depends on (ARCH_OMAP3 || ARCH_OMAP4) default y ---help--- Enables support for the on-chip OHCI controller on @@ -332,7 +382,7 @@ config USB_OHCI_HCD_OMAP3 config USB_OHCI_ATH79 bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)" - depends on USB_OHCI_HCD && (SOC_AR71XX || SOC_AR724X) + depends on (SOC_AR71XX || SOC_AR724X) select USB_OHCI_HCD_PLATFORM default y help @@ -344,7 +394,7 @@ config USB_OHCI_ATH79 config USB_OHCI_HCD_PPC_OF_BE bool "OHCI support for OF platform bus (big endian)" - depends on USB_OHCI_HCD && PPC_OF + depends on PPC_OF select USB_OHCI_BIG_ENDIAN_DESC select USB_OHCI_BIG_ENDIAN_MMIO ---help--- @@ -353,7 +403,7 @@ config USB_OHCI_HCD_PPC_OF_BE config USB_OHCI_HCD_PPC_OF_LE bool "OHCI support for OF platform bus (little endian)" - depends on USB_OHCI_HCD && PPC_OF + depends on PPC_OF select USB_OHCI_LITTLE_ENDIAN ---help--- Enables support for little-endian USB controllers present on the @@ -361,12 +411,12 @@ config USB_OHCI_HCD_PPC_OF_LE config USB_OHCI_HCD_PPC_OF bool - depends on USB_OHCI_HCD && PPC_OF + depends on PPC_OF default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE config USB_OHCI_HCD_PCI bool "OHCI support for PCI-bus USB controllers" - depends on USB_OHCI_HCD && PCI && (STB03xxx || PPC_MPC52xx || USB_OHCI_HCD_PPC_OF) + depends on PCI && (STB03xxx || PPC_MPC52xx || USB_OHCI_HCD_PPC_OF) default y select USB_OHCI_LITTLE_ENDIAN ---help--- @@ -375,7 +425,7 @@ config USB_OHCI_HCD_PCI config USB_OHCI_HCD_SSB bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)" - depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) + depends on (SSB = y || SSB = USB_OHCI_HCD) select USB_HCD_SSB select USB_OHCI_HCD_PLATFORM default n @@ -393,7 +443,7 @@ config USB_OHCI_HCD_SSB config USB_OHCI_SH bool "OHCI support for SuperH USB controller (DEPRECATED)" - depends on USB_OHCI_HCD && SUPERH + depends on SUPERH select USB_OHCI_HCD_PLATFORM ---help--- This option is deprecated now and the driver was removed, use @@ -404,13 +454,13 @@ config USB_OHCI_SH config USB_OHCI_EXYNOS boolean "OHCI support for Samsung EXYNOS SoC Series" - depends on USB_OHCI_HCD && ARCH_EXYNOS + depends on ARCH_EXYNOS help Enable support for the Samsung Exynos SOC's on-chip OHCI controller. config USB_CNS3XXX_OHCI bool "Cavium CNS3XXX OHCI Module (DEPRECATED)" - depends on USB_OHCI_HCD && ARCH_CNS3XXX + depends on ARCH_CNS3XXX select USB_OHCI_HCD_PLATFORM ---help--- This option is deprecated now and the driver was removed, use @@ -421,7 +471,6 @@ config USB_CNS3XXX_OHCI config USB_OHCI_HCD_PLATFORM bool "Generic OHCI driver for a platform device" - depends on USB_OHCI_HCD default n ---help--- Adds an OHCI host driver for a generic platform device, which @@ -429,35 +478,36 @@ config USB_OHCI_HCD_PLATFORM If unsure, say N. -config USB_EHCI_HCD_PLATFORM - tristate "Generic EHCI driver for a platform device" - depends on USB_EHCI_HCD - default n - ---help--- - Adds an EHCI host driver for a generic platform device, which - provides a memory space and an irq. +config USB_OCTEON_OHCI + bool "Octeon on-chip OHCI support" + depends on CPU_CAVIUM_OCTEON + default USB_OCTEON_EHCI + select USB_OHCI_BIG_ENDIAN_MMIO + select USB_OHCI_LITTLE_ENDIAN + help + Enable support for the Octeon II SOC's on-chip OHCI + controller. It is needed for low-speed USB 1.0 device + support. All CN6XXX based chips with USB are supported. - If unsure, say N. config USB_OHCI_BIG_ENDIAN_DESC bool - depends on USB_OHCI_HCD default n config USB_OHCI_BIG_ENDIAN_MMIO bool - depends on USB_OHCI_HCD default n config USB_OHCI_LITTLE_ENDIAN bool - depends on USB_OHCI_HCD default n if STB03xxx || PPC_MPC52xx default y +endif # USB_OHCI_HCD + config USB_UHCI_HCD tristate "UHCI HCD (most Intel and VIA) support" - depends on USB && (PCI || SPARC_LEON || ARCH_VT8500) + depends on PCI || SPARC_LEON || ARCH_VT8500 ---help--- The Universal Host Controller Interface is a standard by Intel for accessing the USB hardware in the PC (which is also called the USB @@ -497,7 +547,7 @@ config USB_UHCI_BIG_ENDIAN_DESC config USB_FHCI_HCD tristate "Freescale QE USB Host Controller support" - depends on USB && OF_GPIO && QE_GPIO && QUICC_ENGINE + depends on OF_GPIO && QE_GPIO && QUICC_ENGINE select FSL_GTM select QE_USB help @@ -514,7 +564,7 @@ config FHCI_DEBUG config USB_U132_HCD tristate "Elan U132 Adapter Host Controller" - depends on USB && USB_FTDI_ELAN + depends on USB_FTDI_ELAN default M help The U132 adapter is a USB to CardBus adapter specifically designed @@ -542,7 +592,6 @@ config USB_U132_HCD config USB_SL811_HCD tristate "SL811HS HCD support" - depends on USB help The SL811HS is a single-port USB controller that supports either host side or peripheral side roles. Enable this option if your @@ -574,7 +623,6 @@ config USB_SL811_CS config USB_R8A66597_HCD tristate "R8A66597 HCD support" - depends on USB help The R8A66597 is a USB 2.0 host and peripheral controller. @@ -586,7 +634,6 @@ config USB_R8A66597_HCD config USB_RENESAS_USBHS_HCD tristate "Renesas USBHS HCD support" - depends on USB depends on USB_RENESAS_USBHS help The Renesas USBHS is a USB 2.0 host and peripheral controller. @@ -611,7 +658,7 @@ config USB_WHCI_HCD config USB_HWA_HCD tristate "Host Wire Adapter (HWA) driver" - depends on USB && UWB + depends on UWB select USB_WUSB select UWB_HWA help @@ -625,7 +672,7 @@ config USB_HWA_HCD config USB_IMX21_HCD tristate "i.MX21 HCD support" - depends on USB && ARM && ARCH_MXC + depends on ARM && ARCH_MXC help This driver enables support for the on-chip USB host in the i.MX21 processor. @@ -633,27 +680,7 @@ config USB_IMX21_HCD To compile this driver as a module, choose M here: the module will be called "imx21-hcd". -config USB_OCTEON_EHCI - bool "Octeon on-chip EHCI support" - depends on USB && USB_EHCI_HCD && CPU_CAVIUM_OCTEON - default n - select USB_EHCI_BIG_ENDIAN_MMIO - help - Enable support for the Octeon II SOC's on-chip EHCI - controller. It is needed for high-speed (480Mbit/sec) - USB 2.0 device support. All CN6XXX based chips with USB are - supported. -config USB_OCTEON_OHCI - bool "Octeon on-chip OHCI support" - depends on USB && USB_OHCI_HCD && CPU_CAVIUM_OCTEON - default USB_OCTEON_EHCI - select USB_OHCI_BIG_ENDIAN_MMIO - select USB_OHCI_LITTLE_ENDIAN - help - Enable support for the Octeon II SOC's on-chip OHCI - controller. It is needed for low-speed USB 1.0 device - support. All CN6XXX based chips with USB are supported. config USB_OCTEON2_COMMON bool diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 001fbff2fdef..4fb73c156d72 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -27,6 +27,12 @@ obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o obj-$(CONFIG_USB_EHCI_HCD_PLATFORM) += ehci-platform.o obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o +obj-$(CONFIG_USB_EHCI_HCD_OMAP) += ehci-omap.o +obj-$(CONFIG_USB_EHCI_HCD_ORION) += ehci-orion.o +obj-$(CONFIG_USB_EHCI_HCD_SPEAR) += ehci-spear.o +obj-$(CONFIG_USB_EHCI_S5P) += ehci-s5p.o +obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o +obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index f3beac4d06b8..66420097c242 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -12,9 +12,22 @@ */ #include <linux/clk.h> -#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> #include <linux/of.h> #include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> + +#include "ehci.h" + +#define DRIVER_DESC "EHCI Atmel driver" + +static const char hcd_name[] = "ehci-atmel"; +static struct hc_driver __read_mostly ehci_atmel_hc_driver; /* interface and function clocks */ static struct clk *iclk, *fclk; @@ -50,51 +63,6 @@ static void atmel_stop_ehci(struct platform_device *pdev) /*-------------------------------------------------------------------------*/ -static int ehci_atmel_setup(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - - /* registers start at offset 0x0 */ - ehci->caps = hcd->regs; - - return ehci_setup(hcd); -} - -static const struct hc_driver ehci_atmel_hc_driver = { - .description = hcd_name, - .product_desc = "Atmel EHCI UHP HS", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* generic hardware linkage */ - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - /* basic lifecycle operations */ - .reset = ehci_atmel_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* managing i/o requests and associated device resources */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - /* scheduling support */ - .get_frame_number = ehci_get_frame, - - /* root hub support */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; - static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32); static int ehci_atmel_drv_probe(struct platform_device *pdev) @@ -102,6 +70,7 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev) struct usb_hcd *hcd; const struct hc_driver *driver = &ehci_atmel_hc_driver; struct resource *res; + struct ehci_hcd *ehci; int irq; int retval; @@ -162,6 +131,10 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev) goto fail_request_resource; } + ehci = hcd_to_ehci(hcd); + /* registers start at offset 0x0 */ + ehci->caps = hcd->regs; + atmel_start_ehci(pdev); retval = usb_add_hcd(hcd, irq, IRQF_SHARED); @@ -185,7 +158,6 @@ static int ehci_atmel_drv_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); - ehci_shutdown(hcd); usb_remove_hcd(hcd); usb_put_hcd(hcd); @@ -213,3 +185,25 @@ static struct platform_driver ehci_atmel_driver = { .of_match_table = of_match_ptr(atmel_ehci_dt_ids), }, }; + +static int __init ehci_atmel_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + ehci_init_driver(&ehci_atmel_hc_driver, NULL); + return platform_driver_register(&ehci_atmel_driver); +} +module_init(ehci_atmel_init); + +static void __exit ehci_atmel_cleanup(void) +{ + platform_driver_unregister(&ehci_atmel_driver); +} +module_exit(ehci_atmel_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_ALIAS("platform:atmel-ehci"); +MODULE_AUTHOR("Nicolas Ferre"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index 70b496dc18a0..5429d2645bbc 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -510,14 +510,16 @@ static ssize_t fill_async_buffer(struct debug_buffer *buf) spin_lock_irqsave (&ehci->lock, flags); for (qh = ehci->async->qh_next.qh; size > 0 && qh; qh = qh->qh_next.qh) qh_lines (ehci, qh, &next, &size); - if (ehci->async_unlink && size > 0) { + if (!list_empty(&ehci->async_unlink) && size > 0) { temp = scnprintf(next, size, "\nunlink =\n"); size -= temp; next += temp; - for (qh = ehci->async_unlink; size > 0 && qh; - qh = qh->unlink_next) - qh_lines (ehci, qh, &next, &size); + list_for_each_entry(qh, &ehci->async_unlink, unlink_node) { + if (size <= 0) + break; + qh_lines(ehci, qh, &next, &size); + } } spin_unlock_irqrestore (&ehci->lock, flags); @@ -814,9 +816,10 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf) } } - if (ehci->async_unlink) { + if (!list_empty(&ehci->async_unlink)) { temp = scnprintf(next, size, "async unlink qh %p\n", - ehci->async_unlink); + list_first_entry(&ehci->async_unlink, + struct ehci_qh, unlink_node)); size -= temp; next += temp; } diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index d81d2fcbff18..3be3df233a0e 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -370,6 +370,15 @@ static int ehci_fsl_setup(struct usb_hcd *hcd) /* EHCI registers start at offset 0x100 */ ehci->caps = hcd->regs + 0x100; +#ifdef CONFIG_PPC_83xx + /* + * Deal with MPC834X that need port power to be cycled after the power + * fault condition is removed. Otherwise the state machine does not + * reflect PORTSC[CSC] correctly. + */ + ehci->need_oc_pp_cycle = 1; +#endif + hcd->has_tt = 1; retval = ehci_setup(hcd); diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 416a6dce5e11..312fc10da3c7 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -482,6 +482,9 @@ static int ehci_init(struct usb_hcd *hcd) * periodic_size can shrink by USBCMD update if hcc_params allows. */ ehci->periodic_size = DEFAULT_I_TDPS; + INIT_LIST_HEAD(&ehci->async_unlink); + INIT_LIST_HEAD(&ehci->async_idle); + INIT_LIST_HEAD(&ehci->intr_unlink); INIT_LIST_HEAD(&ehci->intr_qh_list); INIT_LIST_HEAD(&ehci->cached_itd_list); INIT_LIST_HEAD(&ehci->cached_sitd_list); @@ -670,9 +673,6 @@ int ehci_setup(struct usb_hcd *hcd) if (retval) return retval; - if (ehci_is_TDI(ehci)) - tdi_reset(ehci); - ehci_reset(ehci); return 0; @@ -749,7 +749,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* guard against (alleged) silicon errata */ if (cmd & CMD_IAAD) ehci_dbg(ehci, "IAA with IAAD still set?\n"); - if (ehci->async_iaa) + if (ehci->iaa_in_progress) COUNT(ehci->stats.iaa); end_unlink_async(ehci); } @@ -757,7 +757,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* remote wakeup [4.3.1] */ if (status & STS_PCD) { unsigned i = HCS_N_PORTS (ehci->hcs_params); - u32 ppcd = 0; + u32 ppcd = ~0; /* kick root hub later */ pcd_status = status; @@ -774,7 +774,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) int pstatus; /* leverage per-port change bits feature */ - if (ehci->has_ppcd && !(ppcd & (1 << i))) + if (!(ppcd & (1 << i))) continue; pstatus = ehci_readl(ehci, &ehci->regs->port_status[i]); @@ -896,17 +896,24 @@ static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) if (rc) goto done; - switch (usb_pipetype (urb->pipe)) { - // case PIPE_CONTROL: - // case PIPE_BULK: - default: + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { + /* + * We don't expedite dequeue for isochronous URBs. + * Just wait until they complete normally or their + * time slot expires. + */ + } else { qh = (struct ehci_qh *) urb->hcpriv; - if (!qh) - break; + qh->exception = 1; switch (qh->qh_state) { case QH_STATE_LINKED: + if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) + start_unlink_intr(ehci, qh); + else + start_unlink_async(ehci, qh); + break; case QH_STATE_COMPLETING: - start_unlink_async(ehci, qh); + qh->dequeue_during_giveback = 1; break; case QH_STATE_UNLINK: case QH_STATE_UNLINK_WAIT: @@ -917,33 +924,6 @@ static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) qh_completions(ehci, qh); break; } - break; - - case PIPE_INTERRUPT: - qh = (struct ehci_qh *) urb->hcpriv; - if (!qh) - break; - switch (qh->qh_state) { - case QH_STATE_LINKED: - case QH_STATE_COMPLETING: - start_unlink_intr(ehci, qh); - break; - case QH_STATE_IDLE: - qh_completions (ehci, qh); - break; - default: - ehci_dbg (ehci, "bogus qh %p state %d\n", - qh, qh->qh_state); - goto done; - } - break; - - case PIPE_ISOCHRONOUS: - // itd or sitd ... - - // wait till next completion, do it then. - // completion irqs can wait up to 1024 msec, - break; } done: spin_unlock_irqrestore (&ehci->lock, flags); @@ -984,6 +964,7 @@ rescan: goto done; } + qh->exception = 1; if (ehci->rh_state < EHCI_RH_RUNNING) qh->qh_state = QH_STATE_IDLE; switch (qh->qh_state) { @@ -1052,13 +1033,12 @@ ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep) usb_settoggle(qh->dev, epnum, is_out, 0); if (!list_empty(&qh->qtd_list)) { WARN_ONCE(1, "clear_halt for a busy endpoint\n"); - } else if (qh->qh_state == QH_STATE_LINKED || - qh->qh_state == QH_STATE_COMPLETING) { - + } else { /* The toggle value in the QH can't be updated * while the QH is active. Unlink it now; * re-linking will call qh_refresh(). */ + qh->exception = 1; if (eptype == USB_ENDPOINT_XFER_BULK) start_unlink_async(ehci, qh); else @@ -1251,11 +1231,6 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_hcd_sh_driver #endif -#ifdef CONFIG_USB_EHCI_HCD_OMAP -#include "ehci-omap.c" -#define PLATFORM_DRIVER ehci_hcd_omap_driver -#endif - #ifdef CONFIG_PPC_PS3 #include "ehci-ps3.c" #define PS3_SYSTEM_BUS_DRIVER ps3_ehci_driver @@ -1271,41 +1246,16 @@ MODULE_LICENSE ("GPL"); #define XILINX_OF_PLATFORM_DRIVER ehci_hcd_xilinx_of_driver #endif -#ifdef CONFIG_PLAT_ORION -#include "ehci-orion.c" -#define PLATFORM_DRIVER ehci_orion_driver -#endif - #ifdef CONFIG_USB_W90X900_EHCI #include "ehci-w90x900.c" #define PLATFORM_DRIVER ehci_hcd_w90x900_driver #endif -#ifdef CONFIG_ARCH_AT91 -#include "ehci-atmel.c" -#define PLATFORM_DRIVER ehci_atmel_driver -#endif - #ifdef CONFIG_USB_OCTEON_EHCI #include "ehci-octeon.c" #define PLATFORM_DRIVER ehci_octeon_driver #endif -#ifdef CONFIG_ARCH_VT8500 -#include "ehci-vt8500.c" -#define PLATFORM_DRIVER vt8500_ehci_driver -#endif - -#ifdef CONFIG_PLAT_SPEAR -#include "ehci-spear.c" -#define PLATFORM_DRIVER spear_ehci_hcd_driver -#endif - -#ifdef CONFIG_USB_EHCI_MSM -#include "ehci-msm.c" -#define PLATFORM_DRIVER ehci_msm_driver -#endif - #ifdef CONFIG_TILE_USB #include "ehci-tilegx.c" #define PLATFORM_DRIVER ehci_hcd_tilegx_driver @@ -1321,11 +1271,6 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER tegra_ehci_driver #endif -#ifdef CONFIG_USB_EHCI_S5P -#include "ehci-s5p.c" -#define PLATFORM_DRIVER s5p_ehci_driver -#endif - #ifdef CONFIG_SPARC_LEON #include "ehci-grlib.c" #define PLATFORM_DRIVER ehci_grlib_driver @@ -1345,6 +1290,12 @@ MODULE_LICENSE ("GPL"); !IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \ !IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \ !IS_ENABLED(CONFIG_USB_EHCI_MXC) && \ + !IS_ENABLED(CONFIG_USB_EHCI_HCD_OMAP) && \ + !IS_ENABLED(CONFIG_USB_EHCI_HCD_ORION) && \ + !IS_ENABLED(CONFIG_USB_EHCI_HCD_SPEAR) && \ + !IS_ENABLED(CONFIG_USB_EHCI_S5P) && \ + !IS_ENABLED(CONFIG_USB_EHCI_HCD_AT91) && \ + !IS_ENABLED(CONFIG_USB_EHCI_MSM) && \ !defined(PLATFORM_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && \ !defined(OF_PLATFORM_DRIVER) && \ diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 7d06e77f6c4f..9ab4a4d9768a 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -464,7 +464,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd) while (i--) { temp = ehci_readl(ehci, &ehci->regs->port_status [i]); if (test_bit(i, &resume_needed)) { - temp &= ~(PORT_RWC_BITS | PORT_RESUME); + temp &= ~(PORT_RWC_BITS | PORT_SUSPEND | PORT_RESUME); ehci_writel(ehci, temp, &ehci->regs->port_status [i]); ehci_vdbg (ehci, "resumed port %d\n", i + 1); } @@ -590,7 +590,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) u32 mask; int ports, i, retval = 1; unsigned long flags; - u32 ppcd = 0; + u32 ppcd = ~0; /* init status to no-changes */ buf [0] = 0; @@ -628,9 +628,10 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) for (i = 0; i < ports; i++) { /* leverage per-port change bits feature */ - if (ehci->has_ppcd && !(ppcd & (1 << i))) - continue; - temp = ehci_readl(ehci, &ehci->regs->port_status [i]); + if (ppcd & (1 << i)) + temp = ehci_readl(ehci, &ehci->regs->port_status[i]); + else + temp = 0; /* * Return status information even for ports with OWNER set. @@ -839,7 +840,8 @@ static int ehci_hub_control ( * power switching; they're allowed to just limit the * current. khubd will turn the power back on. */ - if ((temp & PORT_OC) && HCS_PPC(ehci->hcs_params)) { + if (((temp & PORT_OC) || (ehci->need_oc_pp_cycle)) + && HCS_PPC(ehci->hcs_params)) { ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_POWER), status_reg); @@ -870,10 +872,9 @@ static int ehci_hub_control ( usb_hcd_end_port_resume(&hcd->self, wIndex); /* stop resume signaling */ - temp = ehci_readl(ehci, status_reg); - ehci_writel(ehci, - temp & ~(PORT_RWC_BITS | PORT_RESUME), - status_reg); + temp &= ~(PORT_RWC_BITS | + PORT_SUSPEND | PORT_RESUME); + ehci_writel(ehci, temp, status_reg); clear_bit(wIndex, &ehci->resuming_ports); retval = handshake(ehci, status_reg, PORT_RESUME, 0, 2000 /* 2msec */); @@ -883,7 +884,7 @@ static int ehci_hub_control ( wIndex + 1, retval); goto error; } - temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10)); + temp = ehci_readl(ehci, status_reg); } } diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c index 88a49c87e748..0f717dc688b7 100644 --- a/drivers/usb/host/ehci-msm.c +++ b/drivers/usb/host/ehci-msm.c @@ -22,16 +22,26 @@ * along with this program; if not, you can find it at http://www.fsf.org */ -#include <linux/platform_device.h> #include <linux/clk.h> #include <linux/err.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> #include <linux/pm_runtime.h> - #include <linux/usb/otg.h> #include <linux/usb/msm_hsusb_hw.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> + +#include "ehci.h" #define MSM_USB_BASE (hcd->regs) +#define DRIVER_DESC "Qualcomm On-Chip EHCI Host Controller" + +static const char hcd_name[] = "ehci-msm"; +static struct hc_driver __read_mostly msm_hc_driver; static struct usb_phy *phy; static int ehci_msm_reset(struct usb_hcd *hcd) @@ -56,52 +66,6 @@ static int ehci_msm_reset(struct usb_hcd *hcd) return 0; } -static struct hc_driver msm_hc_driver = { - .description = hcd_name, - .product_desc = "Qualcomm On-Chip EHCI Host Controller", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_USB2 | HCD_MEMORY, - - .reset = ehci_msm_reset, - .start = ehci_run, - - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, - - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - /* - * PM support - */ - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, -}; - static int ehci_msm_probe(struct platform_device *pdev) { struct usb_hcd *hcd; @@ -145,7 +109,7 @@ static int ehci_msm_probe(struct platform_device *pdev) * management. */ phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); - if (IS_ERR_OR_NULL(phy)) { + if (IS_ERR(phy)) { dev_err(&pdev->dev, "unable to find transceiver\n"); ret = -ENODEV; goto put_hcd; @@ -165,6 +129,8 @@ static int ehci_msm_probe(struct platform_device *pdev) pm_runtime_no_callbacks(&pdev->dev); pm_runtime_enable(&pdev->dev); + /* FIXME: need to call usb_add_hcd() here? */ + return 0; put_hcd: @@ -183,6 +149,8 @@ static int ehci_msm_remove(struct platform_device *pdev) otg_set_host(phy->otg, NULL); + /* FIXME: need to call usb_remove_hcd() here? */ + usb_put_hcd(hcd); return 0; @@ -226,3 +194,28 @@ static struct platform_driver ehci_msm_driver = { .pm = &ehci_msm_dev_pm_ops, }, }; + +static const struct ehci_driver_overrides msm_overrides __initdata = { + .reset = ehci_msm_reset, +}; + +static int __init ehci_msm_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + ehci_init_driver(&msm_hc_driver, &msm_overrides); + return platform_driver_register(&ehci_msm_driver); +} +module_init(ehci_msm_init); + +static void __exit ehci_msm_cleanup(void) +{ + platform_driver_unregister(&ehci_msm_driver); +} +module_exit(ehci_msm_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_ALIAS("platform:msm-ehci"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c index 3065809546b1..402062973f03 100644 --- a/drivers/usb/host/ehci-mv.c +++ b/drivers/usb/host/ehci-mv.c @@ -33,25 +33,17 @@ struct ehci_hcd_mv { struct mv_usb_platform_data *pdata; - /* clock source and total clock number */ - unsigned int clknum; - struct clk *clk[0]; + struct clk *clk; }; static void ehci_clock_enable(struct ehci_hcd_mv *ehci_mv) { - unsigned int i; - - for (i = 0; i < ehci_mv->clknum; i++) - clk_prepare_enable(ehci_mv->clk[i]); + clk_prepare_enable(ehci_mv->clk); } static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv) { - unsigned int i; - - for (i = 0; i < ehci_mv->clknum; i++) - clk_disable_unprepare(ehci_mv->clk[i]); + clk_disable_unprepare(ehci_mv->clk); } static int mv_ehci_enable(struct ehci_hcd_mv *ehci_mv) @@ -144,9 +136,8 @@ static int mv_ehci_probe(struct platform_device *pdev) struct ehci_hcd *ehci; struct ehci_hcd_mv *ehci_mv; struct resource *r; - int clk_i, retval = -ENODEV; + int retval = -ENODEV; u32 offset; - size_t size; if (!pdata) { dev_err(&pdev->dev, "missing platform_data\n"); @@ -160,8 +151,7 @@ static int mv_ehci_probe(struct platform_device *pdev) if (!hcd) return -ENOMEM; - size = sizeof(*ehci_mv) + sizeof(struct clk *) * pdata->clknum; - ehci_mv = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); + ehci_mv = devm_kzalloc(&pdev->dev, sizeof(*ehci_mv), GFP_KERNEL); if (ehci_mv == NULL) { dev_err(&pdev->dev, "cannot allocate ehci_hcd_mv\n"); retval = -ENOMEM; @@ -172,16 +162,11 @@ static int mv_ehci_probe(struct platform_device *pdev) ehci_mv->pdata = pdata; ehci_mv->hcd = hcd; - ehci_mv->clknum = pdata->clknum; - for (clk_i = 0; clk_i < ehci_mv->clknum; clk_i++) { - ehci_mv->clk[clk_i] = - devm_clk_get(&pdev->dev, pdata->clkname[clk_i]); - if (IS_ERR(ehci_mv->clk[clk_i])) { - dev_err(&pdev->dev, "error get clck \"%s\"\n", - pdata->clkname[clk_i]); - retval = PTR_ERR(ehci_mv->clk[clk_i]); - goto err_clear_drvdata; - } + ehci_mv->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(ehci_mv->clk)) { + dev_err(&pdev->dev, "error getting clock\n"); + retval = PTR_ERR(ehci_mv->clk); + goto err_clear_drvdata; } r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phyregs"); @@ -225,7 +210,7 @@ static int mv_ehci_probe(struct platform_device *pdev) (void __iomem *) ((unsigned long) ehci_mv->cap_regs + offset); hcd->rsrc_start = r->start; - hcd->rsrc_len = r->end - r->start + 1; + hcd->rsrc_len = resource_size(r); hcd->regs = ehci_mv->op_regs; hcd->irq = platform_get_irq(pdev, 0); @@ -240,12 +225,16 @@ static int mv_ehci_probe(struct platform_device *pdev) ehci_mv->mode = pdata->mode; if (ehci_mv->mode == MV_USB_MODE_OTG) { -#ifdef CONFIG_USB_OTG_UTILS ehci_mv->otg = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); - if (IS_ERR_OR_NULL(ehci_mv->otg)) { - dev_err(&pdev->dev, - "unable to find transceiver\n"); - retval = -ENODEV; + if (IS_ERR(ehci_mv->otg)) { + retval = PTR_ERR(ehci_mv->otg); + + if (retval == -ENXIO) + dev_info(&pdev->dev, "MV_USB_MODE_OTG " + "must have CONFIG_USB_PHY enabled\n"); + else + dev_err(&pdev->dev, + "unable to find transceiver\n"); goto err_disable_clk; } @@ -258,11 +247,6 @@ static int mv_ehci_probe(struct platform_device *pdev) } /* otg will enable clock before use as host */ mv_ehci_disable(ehci_mv); -#else - dev_info(&pdev->dev, "MV_USB_MODE_OTG " - "must have CONFIG_USB_OTG_UTILS enabled\n"); - goto err_disable_clk; -#endif } else { if (pdata->set_vbus) pdata->set_vbus(1); diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index e9301fb97eaa..c369767b00e2 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -28,11 +28,7 @@ #include <linux/slab.h> #include <linux/usb.h> #include <linux/usb/hcd.h> - #include <linux/platform_data/usb-ehci-mxc.h> - -#include <asm/mach-types.h> - #include "ehci.h" #define DRIVER_DESC "Freescale On-Chip EHCI Host driver" @@ -47,7 +43,7 @@ struct ehci_mxc_priv { static struct hc_driver __read_mostly ehci_mxc_hc_driver; -static const struct ehci_driver_overrides ehci_mxc_overrides __initdata = { +static const struct ehci_driver_overrides ehci_mxc_overrides __initconst = { .extra_priv_size = sizeof(struct ehci_mxc_priv), }; @@ -61,8 +57,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct ehci_hcd *ehci; - dev_info(&pdev->dev, "initializing i.MX USB Controller\n"); - if (!pdata) { dev_err(dev, "No platform data given, bailing out.\n"); return -EINVAL; @@ -178,7 +172,7 @@ err_alloc: return ret; } -static int __exit ehci_mxc_drv_remove(struct platform_device *pdev) +static int ehci_mxc_drv_remove(struct platform_device *pdev) { struct mxc_usbh_platform_data *pdata = pdev->dev.platform_data; struct usb_hcd *hcd = platform_get_drvdata(pdev); diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 0555ee42d7cb..3d1491b5f360 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -4,10 +4,11 @@ * Bus Glue for the EHCI controllers in OMAP3/4 * Tested on several OMAP3 boards, and OMAP4 Pandaboard * - * Copyright (C) 2007-2011 Texas Instruments, Inc. + * Copyright (C) 2007-2013 Texas Instruments, Inc. * Author: Vikram Pandita <vikram.pandita@ti.com> * Author: Anand Gadiyar <gadiyar@ti.com> * Author: Keshava Munegowda <keshava_mgowda@ti.com> + * Author: Roger Quadros <rogerq@ti.com> * * Copyright (C) 2009 Nokia Corporation * Contact: Felipe Balbi <felipe.balbi@nokia.com> @@ -28,21 +29,23 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * - * TODO (last updated Feb 27, 2010): - * - add kernel-doc - * - enable AUTOIDLE - * - add suspend/resume - * - add HSIC and TLL support - * - convert to use hwmod and runtime PM */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/io.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/usb/ulpi.h> -#include <linux/regulator/consumer.h> #include <linux/pm_runtime.h> #include <linux/gpio.h> #include <linux/clk.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> +#include <linux/of.h> +#include <linux/dma-mapping.h> + +#include "ehci.h" #include <linux/platform_data/usb-omap.h> @@ -57,10 +60,16 @@ #define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8 #define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0 -/*-------------------------------------------------------------------------*/ +#define DRIVER_DESC "OMAP-EHCI Host Controller driver" + +static const char hcd_name[] = "ehci-omap"; -static const struct hc_driver ehci_omap_hc_driver; +/*-------------------------------------------------------------------------*/ +struct omap_hcd { + struct usb_phy *phy[OMAP3_HS_USB_PORTS]; /* one PHY for each port */ + int nports; +}; static inline void ehci_write(void __iomem *base, u32 reg, u32 val) { @@ -72,99 +81,16 @@ static inline u32 ehci_read(void __iomem *base, u32 reg) return __raw_readl(base + reg); } +/* configure so an HC device and id are always provided */ +/* always called with process context; sleeping is OK */ -static void omap_ehci_soft_phy_reset(struct usb_hcd *hcd, u8 port) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(1000); - unsigned reg = 0; - - reg = ULPI_FUNC_CTRL_RESET - /* FUNCTION_CTRL_SET register */ - | (ULPI_SET(ULPI_FUNC_CTRL) << EHCI_INSNREG05_ULPI_REGADD_SHIFT) - /* Write */ - | (2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT) - /* PORTn */ - | ((port + 1) << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT) - /* start ULPI access*/ - | (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT); - - ehci_write(hcd->regs, EHCI_INSNREG05_ULPI, reg); - - /* Wait for ULPI access completion */ - while ((ehci_read(hcd->regs, EHCI_INSNREG05_ULPI) - & (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT))) { - cpu_relax(); - - if (time_after(jiffies, timeout)) { - dev_dbg(hcd->self.controller, - "phy reset operation timed out\n"); - break; - } - } -} - -static int omap_ehci_init(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int rc; - struct usbhs_omap_platform_data *pdata; - - pdata = hcd->self.controller->platform_data; - - /* Hold PHYs in reset while initializing EHCI controller */ - if (pdata->phy_reset) { - if (gpio_is_valid(pdata->reset_gpio_port[0])) - gpio_set_value_cansleep(pdata->reset_gpio_port[0], 0); - - if (gpio_is_valid(pdata->reset_gpio_port[1])) - gpio_set_value_cansleep(pdata->reset_gpio_port[1], 0); - - /* Hold the PHY in RESET for enough time till DIR is high */ - udelay(10); - } - - /* Soft reset the PHY using PHY reset command over ULPI */ - if (pdata->port_mode[0] == OMAP_EHCI_PORT_MODE_PHY) - omap_ehci_soft_phy_reset(hcd, 0); - if (pdata->port_mode[1] == OMAP_EHCI_PORT_MODE_PHY) - omap_ehci_soft_phy_reset(hcd, 1); - - /* we know this is the memory we want, no need to ioremap again */ - ehci->caps = hcd->regs; - - rc = ehci_setup(hcd); - - if (pdata->phy_reset) { - /* Hold the PHY in RESET for enough time till - * PHY is settled and ready - */ - udelay(10); - - if (gpio_is_valid(pdata->reset_gpio_port[0])) - gpio_set_value_cansleep(pdata->reset_gpio_port[0], 1); - - if (gpio_is_valid(pdata->reset_gpio_port[1])) - gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1); - } - - return rc; -} +static struct hc_driver __read_mostly ehci_omap_hc_driver; -static void disable_put_regulator( - struct usbhs_omap_platform_data *pdata) -{ - int i; - - for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) { - if (pdata->regulator[i]) { - regulator_disable(pdata->regulator[i]); - regulator_put(pdata->regulator[i]); - } - } -} +static const struct ehci_driver_overrides ehci_omap_overrides __initdata = { + .extra_priv_size = sizeof(struct omap_hcd), +}; -/* configure so an HC device and id are always provided */ -/* always called with process context; sleeping is OK */ +static u64 omap_ehci_dma_mask = DMA_BIT_MASK(32); /** * ehci_hcd_omap_probe - initialize TI-based HCDs @@ -175,15 +101,15 @@ static void disable_put_regulator( */ static int ehci_hcd_omap_probe(struct platform_device *pdev) { - struct device *dev = &pdev->dev; - struct usbhs_omap_platform_data *pdata = dev->platform_data; - struct resource *res; - struct usb_hcd *hcd; - void __iomem *regs; - int ret = -ENODEV; - int irq; - int i; - char supply[7]; + struct device *dev = &pdev->dev; + struct usbhs_omap_platform_data *pdata = dev->platform_data; + struct resource *res; + struct usb_hcd *hcd; + void __iomem *regs; + int ret = -ENODEV; + int irq; + int i; + struct omap_hcd *omap; if (usb_disabled()) return -ENODEV; @@ -193,52 +119,74 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) return -ENODEV; } - irq = platform_get_irq_byname(pdev, "ehci-irq"); - if (irq < 0) { - dev_err(dev, "EHCI irq failed\n"); - return -ENODEV; + /* For DT boot, get platform data from parent. i.e. usbhshost */ + if (dev->of_node) { + pdata = dev->parent->platform_data; + dev->platform_data = pdata; } - res = platform_get_resource_byname(pdev, - IORESOURCE_MEM, "ehci"); - if (!res) { - dev_err(dev, "UHH EHCI get resource failed\n"); + if (!pdata) { + dev_err(dev, "Missing platform data\n"); return -ENODEV; } - regs = ioremap(res->start, resource_size(res)); - if (!regs) { - dev_err(dev, "UHH EHCI ioremap failed\n"); - return -ENOMEM; + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(dev, "EHCI irq failed\n"); + return -ENODEV; } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + regs = devm_ioremap_resource(dev, res); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + /* + * Right now device-tree probed devices don't get dma_mask set. + * Since shared usb code relies on it, set it here for now. + * Once we have dma capability bindings this can go away. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &omap_ehci_dma_mask; + hcd = usb_create_hcd(&ehci_omap_hc_driver, dev, dev_name(dev)); if (!hcd) { - dev_err(dev, "failed to create hcd with err %d\n", ret); - ret = -ENOMEM; - goto err_io; + dev_err(dev, "Failed to create HCD\n"); + return -ENOMEM; } hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); hcd->regs = regs; - - /* get ehci regulator and enable */ - for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) { - if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) { - pdata->regulator[i] = NULL; - continue; - } - snprintf(supply, sizeof(supply), "hsusb%d", i); - pdata->regulator[i] = regulator_get(dev, supply); - if (IS_ERR(pdata->regulator[i])) { - pdata->regulator[i] = NULL; - dev_dbg(dev, - "failed to get ehci port%d regulator\n", i); - } else { - regulator_enable(pdata->regulator[i]); + hcd_to_ehci(hcd)->caps = regs; + + omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv; + omap->nports = pdata->nports; + + platform_set_drvdata(pdev, hcd); + + /* get the PHY devices if needed */ + for (i = 0 ; i < omap->nports ; i++) { + struct usb_phy *phy; + + /* get the PHY device */ + if (dev->of_node) + phy = devm_usb_get_phy_by_phandle(dev, "phys", i); + else + phy = devm_usb_get_phy_dev(dev, i); + if (IS_ERR(phy)) { + /* Don't bail out if PHY is not absolutely necessary */ + if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) + continue; + + ret = PTR_ERR(phy); + dev_err(dev, "Can't get PHY device for port %d: %d\n", + i, ret); + goto err_phy; } + + omap->phy[i] = phy; } pm_runtime_enable(dev); @@ -262,16 +210,34 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) goto err_pm_runtime; } + /* + * Bring PHYs out of reset. + * Even though HSIC mode is a PHY-less mode, the reset + * line exists between the chips and can be modelled + * as a PHY device for reset control. + */ + for (i = 0; i < omap->nports; i++) { + if (!omap->phy[i]) + continue; + + usb_phy_init(omap->phy[i]); + /* bring PHY out of suspend */ + usb_phy_set_suspend(omap->phy[i], 0); + } return 0; err_pm_runtime: - disable_put_regulator(pdata); pm_runtime_put_sync(dev); + +err_phy: + for (i = 0; i < omap->nports; i++) { + if (omap->phy[i]) + usb_phy_shutdown(omap->phy[i]); + } + usb_put_hcd(hcd); -err_io: - iounmap(regs); return ret; } @@ -286,14 +252,19 @@ err_io: */ static int ehci_hcd_omap_remove(struct platform_device *pdev) { - struct device *dev = &pdev->dev; - struct usb_hcd *hcd = dev_get_drvdata(dev); + struct device *dev = &pdev->dev; + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct omap_hcd *omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv; + int i; usb_remove_hcd(hcd); - disable_put_regulator(dev->platform_data); - iounmap(hcd->regs); - usb_put_hcd(hcd); + for (i = 0; i < omap->nports; i++) { + if (omap->phy[i]) + usb_phy_shutdown(omap->phy[i]); + } + + usb_put_hcd(hcd); pm_runtime_put_sync(dev); pm_runtime_disable(dev); @@ -308,6 +279,13 @@ static void ehci_hcd_omap_shutdown(struct platform_device *pdev) hcd->driver->shutdown(hcd); } +static const struct of_device_id omap_ehci_dt_ids[] = { + { .compatible = "ti,ehci-omap" }, + { } +}; + +MODULE_DEVICE_TABLE(of, omap_ehci_dt_ids); + static struct platform_driver ehci_hcd_omap_driver = { .probe = ehci_hcd_omap_probe, .remove = ehci_hcd_omap_remove, @@ -315,56 +293,35 @@ static struct platform_driver ehci_hcd_omap_driver = { /*.suspend = ehci_hcd_omap_suspend, */ /*.resume = ehci_hcd_omap_resume, */ .driver = { - .name = "ehci-omap", + .name = hcd_name, + .of_match_table = of_match_ptr(omap_ehci_dt_ids), } }; /*-------------------------------------------------------------------------*/ -static const struct hc_driver ehci_omap_hc_driver = { - .description = hcd_name, - .product_desc = "OMAP-EHCI Host Controller", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - /* - * basic lifecycle operations - */ - .reset = omap_ehci_init, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, +static int __init ehci_omap_init(void) +{ + if (usb_disabled()) + return -ENODEV; - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, + pr_info("%s: " DRIVER_DESC "\n", hcd_name); - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, + ehci_init_driver(&ehci_omap_hc_driver, &ehci_omap_overrides); + return platform_driver_register(&ehci_hcd_omap_driver); +} +module_init(ehci_omap_init); - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; +static void __exit ehci_omap_cleanup(void) +{ + platform_driver_unregister(&ehci_hcd_omap_driver); +} +module_exit(ehci_omap_cleanup); MODULE_ALIAS("platform:ehci-omap"); MODULE_AUTHOR("Texas Instruments, Inc."); MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>"); +MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 914a3ecfb5d3..54c579485150 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -17,6 +17,12 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/of_irq.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> +#include <linux/io.h> +#include <linux/dma-mapping.h> + +#include "ehci.h" #define rdl(off) __raw_readl(hcd->regs + (off)) #define wrl(off, val) __raw_writel((val), hcd->regs + (off)) @@ -34,6 +40,12 @@ #define USB_PHY_IVREF_CTRL 0x440 #define USB_PHY_TST_GRP_CTRL 0x450 +#define DRIVER_DESC "EHCI orion driver" + +static const char hcd_name[] = "ehci-orion"; + +static struct hc_driver __read_mostly ehci_orion_hc_driver; + /* * Implement Orion USB controller specification guidelines */ @@ -104,51 +116,6 @@ static void orion_usb_phy_v1_setup(struct usb_hcd *hcd) wrl(USB_MODE, 0x13); } -static const struct hc_driver ehci_orion_hc_driver = { - .description = hcd_name, - .product_desc = "Marvell Orion EHCI", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - /* - * basic lifecycle operations - */ - .reset = ehci_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; - static void ehci_orion_conf_mbus_windows(struct usb_hcd *hcd, const struct mbus_dram_target_info *dram) @@ -305,7 +272,7 @@ err1: return err; } -static int __exit ehci_orion_drv_remove(struct platform_device *pdev) +static int ehci_orion_drv_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); struct clk *clk; @@ -323,8 +290,6 @@ static int __exit ehci_orion_drv_remove(struct platform_device *pdev) return 0; } -MODULE_ALIAS("platform:orion-ehci"); - static const struct of_device_id ehci_orion_dt_ids[] = { { .compatible = "marvell,orion-ehci", }, {}, @@ -333,7 +298,7 @@ MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids); static struct platform_driver ehci_orion_driver = { .probe = ehci_orion_drv_probe, - .remove = __exit_p(ehci_orion_drv_remove), + .remove = ehci_orion_drv_remove, .shutdown = usb_hcd_platform_shutdown, .driver = { .name = "orion-ehci", @@ -341,3 +306,26 @@ static struct platform_driver ehci_orion_driver = { .of_match_table = of_match_ptr(ehci_orion_dt_ids), }, }; + +static int __init ehci_orion_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + + ehci_init_driver(&ehci_orion_hc_driver, NULL); + return platform_driver_register(&ehci_orion_driver); +} +module_init(ehci_orion_init); + +static void __exit ehci_orion_cleanup(void) +{ + platform_driver_unregister(&ehci_orion_driver); +} +module_exit(ehci_orion_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_ALIAS("platform:orion-ehci"); +MODULE_AUTHOR("Tzachi Perelstein"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 170b9399e09f..595d210655b6 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -292,17 +292,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd) } } -#ifdef CONFIG_USB_SUSPEND - /* REVISIT: the controller works fine for wakeup iff the root hub - * itself is "globally" suspended, but usbcore currently doesn't - * understand such things. - * - * System suspend currently expects to be able to suspend the entire - * device tree, device-at-a-time. If we failed selective suspend - * reports, system suspend would fail; so the root hub code must claim - * success. That's lying to usbcore, and it matters for runtime - * PM scenarios with selective suspend and remote wakeup... - */ +#ifdef CONFIG_PM_RUNTIME if (ehci->no_selective_suspend && device_can_wakeup(&pdev->dev)) ehci_warn(ehci, "selective suspend/wakeup unavailable\n"); #endif @@ -385,7 +375,7 @@ static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated) static struct hc_driver __read_mostly ehci_pci_hc_driver; -static const struct ehci_driver_overrides pci_overrides __initdata = { +static const struct ehci_driver_overrides pci_overrides __initconst = { .reset = ehci_pci_setup, }; diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index ca7506390542..f47f2594c9d4 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -18,11 +18,13 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ +#include <linux/dma-mapping.h> #include <linux/err.h> #include <linux/kernel.h> #include <linux/hrtimer.h> #include <linux/io.h> #include <linux/module.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/usb.h> #include <linux/usb/hcd.h> @@ -58,26 +60,36 @@ static int ehci_platform_reset(struct usb_hcd *hcd) static struct hc_driver __read_mostly ehci_platform_hc_driver; -static const struct ehci_driver_overrides platform_overrides __initdata = { +static const struct ehci_driver_overrides platform_overrides __initconst = { .reset = ehci_platform_reset, }; +static struct usb_ehci_pdata ehci_platform_defaults; + static int ehci_platform_probe(struct platform_device *dev) { struct usb_hcd *hcd; struct resource *res_mem; - struct usb_ehci_pdata *pdata = dev->dev.platform_data; + struct usb_ehci_pdata *pdata; int irq; int err = -ENOMEM; - if (!pdata) { - WARN_ON(1); - return -ENODEV; - } - if (usb_disabled()) return -ENODEV; + /* + * use reasonable defaults so platforms don't have to provide these. + * with DT probing on ARM, none of these are set. + */ + if (!dev->dev.platform_data) + dev->dev.platform_data = &ehci_platform_defaults; + if (!dev->dev.dma_mask) + dev->dev.dma_mask = &dev->dev.coherent_dma_mask; + if (!dev->dev.coherent_dma_mask) + dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + + pdata = dev->dev.platform_data; + irq = platform_get_irq(dev, 0); if (irq < 0) { dev_err(&dev->dev, "no irq provided"); @@ -139,6 +151,9 @@ static int ehci_platform_remove(struct platform_device *dev) if (pdata->power_off) pdata->power_off(dev); + if (pdata == &ehci_platform_defaults) + dev->dev.platform_data = NULL; + return 0; } @@ -183,6 +198,12 @@ static int ehci_platform_resume(struct device *dev) #define ehci_platform_resume NULL #endif /* CONFIG_PM */ +static const struct of_device_id vt8500_ehci_ids[] = { + { .compatible = "via,vt8500-ehci", }, + { .compatible = "wm,prizm-ehci", }, + {} +}; + static const struct platform_device_id ehci_platform_table[] = { { "ehci-platform", 0 }, { } @@ -203,6 +224,7 @@ static struct platform_driver ehci_platform_driver = { .owner = THIS_MODULE, .name = "ehci-platform", .pm = &ehci_platform_pm_ops, + .of_match_table = of_match_ptr(vt8500_ehci_ids), } }; diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c index df5925a4f0db..fd983771b025 100644 --- a/drivers/usb/host/ehci-ps3.c +++ b/drivers/usb/host/ehci-ps3.c @@ -221,7 +221,6 @@ static int ps3_ehci_remove(struct ps3_system_bus_device *dev) tmp = hcd->irq; - ehci_shutdown(hcd); usb_remove_hcd(hcd); ps3_system_bus_set_drvdata(dev, NULL); diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 23d136904285..d34b399b78e2 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -90,7 +90,7 @@ qh_update (struct ehci_hcd *ehci, struct ehci_qh *qh, struct ehci_qtd *qtd) struct ehci_qh_hw *hw = qh->hw; /* writes to an active overlay are unsafe */ - BUG_ON(qh->qh_state != QH_STATE_IDLE); + WARN_ON(qh->qh_state != QH_STATE_IDLE); hw->hw_qtd_next = QTD_NEXT(ehci, qtd->qtd_dma); hw->hw_alt_next = EHCI_LIST_END(ehci); @@ -123,26 +123,19 @@ qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh) { struct ehci_qtd *qtd; - if (list_empty (&qh->qtd_list)) - qtd = qh->dummy; - else { - qtd = list_entry (qh->qtd_list.next, - struct ehci_qtd, qtd_list); - /* - * first qtd may already be partially processed. - * If we come here during unlink, the QH overlay region - * might have reference to the just unlinked qtd. The - * qtd is updated in qh_completions(). Update the QH - * overlay here. - */ - if (qh->hw->hw_token & ACTIVE_BIT(ehci)) { - qh->hw->hw_qtd_next = qtd->hw_next; - qtd = NULL; - } - } + qtd = list_entry(qh->qtd_list.next, struct ehci_qtd, qtd_list); - if (qtd) - qh_update (ehci, qh, qtd); + /* + * first qtd may already be partially processed. + * If we come here during unlink, the QH overlay region + * might have reference to the just unlinked qtd. The + * qtd is updated in qh_completions(). Update the QH + * overlay here. + */ + if (qh->hw->hw_token & ACTIVE_BIT(ehci)) + qh->hw->hw_qtd_next = qtd->hw_next; + else + qh_update(ehci, qh, qtd); } /*-------------------------------------------------------------------------*/ @@ -299,8 +292,8 @@ static int qh_schedule (struct ehci_hcd *ehci, struct ehci_qh *qh); /* * Process and free completed qtds for a qh, returning URBs to drivers. - * Chases up to qh->hw_current. Returns number of completions called, - * indicating how much "real" work we did. + * Chases up to qh->hw_current. Returns nonzero if the caller should + * unlink qh. */ static unsigned qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) @@ -309,13 +302,9 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) struct list_head *entry, *tmp; int last_status; int stopped; - unsigned count = 0; u8 state; struct ehci_qh_hw *hw = qh->hw; - if (unlikely (list_empty (&qh->qtd_list))) - return count; - /* completions (or tasks on other cpus) must never clobber HALT * till we've gone through and cleaned everything up, even when * they add urbs to this qh's queue or mark them for unlinking. @@ -333,7 +322,7 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) rescan: last = NULL; last_status = -EINPROGRESS; - qh->needs_rescan = 0; + qh->dequeue_during_giveback = 0; /* remove de-activated QTDs from front of queue. * after faults (including short reads), cleanup this urb @@ -352,7 +341,6 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) if (last) { if (likely (last->urb != urb)) { ehci_urb_done(ehci, last->urb, last_status); - count++; last_status = -EINPROGRESS; } ehci_qtd_free (ehci, last); @@ -526,23 +514,16 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) /* last urb's completion might still need calling */ if (likely (last != NULL)) { ehci_urb_done(ehci, last->urb, last_status); - count++; ehci_qtd_free (ehci, last); } /* Do we need to rescan for URBs dequeued during a giveback? */ - if (unlikely(qh->needs_rescan)) { + if (unlikely(qh->dequeue_during_giveback)) { /* If the QH is already unlinked, do the rescan now. */ if (state == QH_STATE_IDLE) goto rescan; - /* Otherwise we have to wait until the QH is fully unlinked. - * Our caller will start an unlink if qh->needs_rescan is - * set. But if an unlink has already started, nothing needs - * to be done. - */ - if (state != QH_STATE_LINKED) - qh->needs_rescan = 0; + /* Otherwise the caller must unlink the QH. */ } /* restore original state; caller must unlink or relink */ @@ -551,33 +532,23 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) /* be sure the hardware's done with the qh before refreshing * it after fault cleanup, or recovering from silicon wrongly * overlaying the dummy qtd (which reduces DMA chatter). + * + * We won't refresh a QH that's linked (after the HC + * stopped the queue). That avoids a race: + * - HC reads first part of QH; + * - CPU updates that first part and the token; + * - HC reads rest of that QH, including token + * Result: HC gets an inconsistent image, and then + * DMAs to/from the wrong memory (corrupting it). + * + * That should be rare for interrupt transfers, + * except maybe high bandwidth ... */ - if (stopped != 0 || hw->hw_qtd_next == EHCI_LIST_END(ehci)) { - switch (state) { - case QH_STATE_IDLE: - qh_refresh(ehci, qh); - break; - case QH_STATE_LINKED: - /* We won't refresh a QH that's linked (after the HC - * stopped the queue). That avoids a race: - * - HC reads first part of QH; - * - CPU updates that first part and the token; - * - HC reads rest of that QH, including token - * Result: HC gets an inconsistent image, and then - * DMAs to/from the wrong memory (corrupting it). - * - * That should be rare for interrupt transfers, - * except maybe high bandwidth ... - */ + if (stopped != 0 || hw->hw_qtd_next == EHCI_LIST_END(ehci)) + qh->exception = 1; - /* Tell the caller to start an unlink */ - qh->needs_rescan = 1; - break; - /* otherwise, unlink already started */ - } - } - - return count; + /* Let the caller know if the QH needs to be unlinked. */ + return qh->exception; } /*-------------------------------------------------------------------------*/ @@ -957,14 +928,13 @@ done: /* NOTE: if (PIPE_INTERRUPT) { scheduler sets s-mask } */ - /* init as live, toggle clear, advance to dummy */ + /* init as live, toggle clear */ qh->qh_state = QH_STATE_IDLE; hw = qh->hw; hw->hw_info1 = cpu_to_hc32(ehci, info1); hw->hw_info2 = cpu_to_hc32(ehci, info2); qh->is_out = !is_input; usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), !is_input, 1); - qh_refresh (ehci, qh); return qh; } @@ -988,8 +958,9 @@ static void disable_async(struct ehci_hcd *ehci) if (--ehci->async_count) return; - /* The async schedule and async_unlink list are supposed to be empty */ - WARN_ON(ehci->async->qh_next.qh || ehci->async_unlink); + /* The async schedule and unlink lists are supposed to be empty */ + WARN_ON(ehci->async->qh_next.qh || !list_empty(&ehci->async_unlink) || + !list_empty(&ehci->async_idle)); /* Don't turn off the schedule until ASS is 1 */ ehci_poll_ASS(ehci); @@ -1020,8 +991,9 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh) head->qh_next.qh = qh; head->hw->hw_next = dma; - qh->xacterrs = 0; qh->qh_state = QH_STATE_LINKED; + qh->xacterrs = 0; + qh->exception = 0; /* qtd completions reported later by interrupt */ enable_async(ehci); @@ -1179,11 +1151,7 @@ static void single_unlink_async(struct ehci_hcd *ehci, struct ehci_qh *qh) /* Add to the end of the list of QHs waiting for the next IAAD */ qh->qh_state = QH_STATE_UNLINK_WAIT; - if (ehci->async_unlink) - ehci->async_unlink_last->unlink_next = qh; - else - ehci->async_unlink = qh; - ehci->async_unlink_last = qh; + list_add_tail(&qh->unlink_node, &ehci->async_unlink); /* Unlink it from the schedule */ prev = ehci->async; @@ -1196,44 +1164,19 @@ static void single_unlink_async(struct ehci_hcd *ehci, struct ehci_qh *qh) ehci->qh_scan_next = qh->qh_next.qh; } -static void start_iaa_cycle(struct ehci_hcd *ehci, bool nested) +static void start_iaa_cycle(struct ehci_hcd *ehci) { - /* - * Do nothing if an IAA cycle is already running or - * if one will be started shortly. - */ - if (ehci->async_iaa || ehci->async_unlinking) + /* Do nothing if an IAA cycle is already running */ + if (ehci->iaa_in_progress) return; + ehci->iaa_in_progress = true; /* If the controller isn't running, we don't have to wait for it */ if (unlikely(ehci->rh_state < EHCI_RH_RUNNING)) { - - /* Do all the waiting QHs */ - ehci->async_iaa = ehci->async_unlink; - ehci->async_unlink = NULL; - - if (!nested) /* Avoid recursion */ - end_unlink_async(ehci); + end_unlink_async(ehci); /* Otherwise start a new IAA cycle */ } else if (likely(ehci->rh_state == EHCI_RH_RUNNING)) { - struct ehci_qh *qh; - - /* Do only the first waiting QH (nVidia bug?) */ - qh = ehci->async_unlink; - - /* - * Intel (?) bug: The HC can write back the overlay region - * even after the IAA interrupt occurs. In self-defense, - * always go through two IAA cycles for each QH. - */ - if (qh->qh_state == QH_STATE_UNLINK_WAIT) { - qh->qh_state = QH_STATE_UNLINK; - } else { - ehci->async_iaa = qh; - ehci->async_unlink = qh->unlink_next; - qh->unlink_next = NULL; - } /* Make sure the unlinks are all visible to the hardware */ wmb(); @@ -1250,36 +1193,73 @@ static void start_iaa_cycle(struct ehci_hcd *ehci, bool nested) static void end_unlink_async(struct ehci_hcd *ehci) { struct ehci_qh *qh; + bool early_exit; if (ehci->has_synopsys_hc_bug) ehci_writel(ehci, (u32) ehci->async->qh_dma, &ehci->regs->async_next); + /* The current IAA cycle has ended */ + ehci->iaa_in_progress = false; + + if (list_empty(&ehci->async_unlink)) + return; + qh = list_first_entry(&ehci->async_unlink, struct ehci_qh, + unlink_node); /* QH whose IAA cycle just ended */ + + /* + * If async_unlinking is set then this routine is already running, + * either on the stack or on another CPU. + */ + early_exit = ehci->async_unlinking; + + /* If the controller isn't running, process all the waiting QHs */ + if (ehci->rh_state < EHCI_RH_RUNNING) + list_splice_tail_init(&ehci->async_unlink, &ehci->async_idle); + + /* + * Intel (?) bug: The HC can write back the overlay region even + * after the IAA interrupt occurs. In self-defense, always go + * through two IAA cycles for each QH. + */ + else if (qh->qh_state == QH_STATE_UNLINK_WAIT) { + qh->qh_state = QH_STATE_UNLINK; + early_exit = true; + } + + /* Otherwise process only the first waiting QH (NVIDIA bug?) */ + else + list_move_tail(&qh->unlink_node, &ehci->async_idle); + + /* Start a new IAA cycle if any QHs are waiting for it */ + if (!list_empty(&ehci->async_unlink)) + start_iaa_cycle(ehci); + + /* + * Don't allow nesting or concurrent calls, + * or wait for the second IAA cycle for the next QH. + */ + if (early_exit) + return; + /* Process the idle QHs */ - restart: ehci->async_unlinking = true; - while (ehci->async_iaa) { - qh = ehci->async_iaa; - ehci->async_iaa = qh->unlink_next; - qh->unlink_next = NULL; + while (!list_empty(&ehci->async_idle)) { + qh = list_first_entry(&ehci->async_idle, struct ehci_qh, + unlink_node); + list_del(&qh->unlink_node); qh->qh_state = QH_STATE_IDLE; qh->qh_next.qh = NULL; - qh_completions(ehci, qh); + if (!list_empty(&qh->qtd_list)) + qh_completions(ehci, qh); if (!list_empty(&qh->qtd_list) && ehci->rh_state == EHCI_RH_RUNNING) qh_link_async(ehci, qh); disable_async(ehci); } ehci->async_unlinking = false; - - /* Start a new IAA cycle if any QHs are waiting for it */ - if (ehci->async_unlink) { - start_iaa_cycle(ehci, true); - if (unlikely(ehci->rh_state < EHCI_RH_RUNNING)) - goto restart; - } } static void start_unlink_async(struct ehci_hcd *ehci, struct ehci_qh *qh); @@ -1288,7 +1268,6 @@ static void unlink_empty_async(struct ehci_hcd *ehci) { struct ehci_qh *qh; struct ehci_qh *qh_to_unlink = NULL; - bool check_unlinks_later = false; int count = 0; /* Find the last async QH which has been empty for a timer cycle */ @@ -1296,15 +1275,13 @@ static void unlink_empty_async(struct ehci_hcd *ehci) if (list_empty(&qh->qtd_list) && qh->qh_state == QH_STATE_LINKED) { ++count; - if (qh->unlink_cycle == ehci->async_unlink_cycle) - check_unlinks_later = true; - else + if (qh->unlink_cycle != ehci->async_unlink_cycle) qh_to_unlink = qh; } } /* If nothing else is being unlinked, unlink the last empty QH */ - if (!ehci->async_iaa && !ehci->async_unlink && qh_to_unlink) { + if (list_empty(&ehci->async_unlink) && qh_to_unlink) { start_unlink_async(ehci, qh_to_unlink); --count; } @@ -1317,7 +1294,7 @@ static void unlink_empty_async(struct ehci_hcd *ehci) } /* The root hub is suspended; unlink all the async QHs */ -static void unlink_empty_async_suspended(struct ehci_hcd *ehci) +static void __maybe_unused unlink_empty_async_suspended(struct ehci_hcd *ehci) { struct ehci_qh *qh; @@ -1326,7 +1303,7 @@ static void unlink_empty_async_suspended(struct ehci_hcd *ehci) WARN_ON(!list_empty(&qh->qtd_list)); single_unlink_async(ehci, qh); } - start_iaa_cycle(ehci, false); + start_iaa_cycle(ehci); } /* makes sure the async qh will become idle */ @@ -1334,19 +1311,12 @@ static void unlink_empty_async_suspended(struct ehci_hcd *ehci) static void start_unlink_async(struct ehci_hcd *ehci, struct ehci_qh *qh) { - /* - * If the QH isn't linked then there's nothing we can do - * unless we were called during a giveback, in which case - * qh_completions() has to deal with it. - */ - if (qh->qh_state != QH_STATE_LINKED) { - if (qh->qh_state == QH_STATE_COMPLETING) - qh->needs_rescan = 1; + /* If the QH isn't linked then there's nothing we can do. */ + if (qh->qh_state != QH_STATE_LINKED) return; - } single_unlink_async(ehci, qh); - start_iaa_cycle(ehci, false); + start_iaa_cycle(ehci); } /*-------------------------------------------------------------------------*/ @@ -1360,7 +1330,7 @@ static void scan_async (struct ehci_hcd *ehci) while (ehci->qh_scan_next) { qh = ehci->qh_scan_next; ehci->qh_scan_next = qh->qh_next.qh; - rescan: + /* clean any finished work for this qh */ if (!list_empty(&qh->qtd_list)) { int temp; @@ -1373,14 +1343,13 @@ static void scan_async (struct ehci_hcd *ehci) * in single_unlink_async(). */ temp = qh_completions(ehci, qh); - if (qh->needs_rescan) { + if (unlikely(temp)) { start_unlink_async(ehci, qh); } else if (list_empty(&qh->qtd_list) && qh->qh_state == QH_STATE_LINKED) { qh->unlink_cycle = ehci->async_unlink_cycle; check_unlinks_later = true; - } else if (temp != 0) - goto rescan; + } } } diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c index 20ebf6a8b7f4..635775278c7f 100644 --- a/drivers/usb/host/ehci-s5p.c +++ b/drivers/usb/host/ehci-s5p.c @@ -13,13 +13,23 @@ */ #include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> #include <linux/of.h> -#include <linux/platform_device.h> #include <linux/of_gpio.h> +#include <linux/platform_device.h> #include <linux/platform_data/usb-ehci-s5p.h> #include <linux/usb/phy.h> #include <linux/usb/samsung_usb_phy.h> -#include <plat/usb-phy.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> +#include <linux/usb/otg.h> + +#include "ehci.h" + +#define DRIVER_DESC "EHCI s5p driver" #define EHCI_INSNREG00(base) (base + 0x90) #define EHCI_INSNREG00_ENA_INCR16 (0x1 << 25) @@ -30,82 +40,35 @@ (EHCI_INSNREG00_ENA_INCR16 | EHCI_INSNREG00_ENA_INCR8 | \ EHCI_INSNREG00_ENA_INCR4 | EHCI_INSNREG00_ENA_INCRX_ALIGN) +static const char hcd_name[] = "ehci-s5p"; +static struct hc_driver __read_mostly s5p_ehci_hc_driver; + struct s5p_ehci_hcd { - struct device *dev; - struct usb_hcd *hcd; struct clk *clk; struct usb_phy *phy; struct usb_otg *otg; struct s5p_ehci_platdata *pdata; }; -static const struct hc_driver s5p_ehci_hc_driver = { - .description = hcd_name, - .product_desc = "S5P EHCI Host Controller", - .hcd_priv_size = sizeof(struct ehci_hcd), - - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - .reset = ehci_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - .get_frame_number = ehci_get_frame, - - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; - -static void s5p_ehci_phy_enable(struct s5p_ehci_hcd *s5p_ehci) -{ - struct platform_device *pdev = to_platform_device(s5p_ehci->dev); - - if (s5p_ehci->phy) - usb_phy_init(s5p_ehci->phy); - else if (s5p_ehci->pdata->phy_init) - s5p_ehci->pdata->phy_init(pdev, USB_PHY_TYPE_HOST); -} - -static void s5p_ehci_phy_disable(struct s5p_ehci_hcd *s5p_ehci) -{ - struct platform_device *pdev = to_platform_device(s5p_ehci->dev); - - if (s5p_ehci->phy) - usb_phy_shutdown(s5p_ehci->phy); - else if (s5p_ehci->pdata->phy_exit) - s5p_ehci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST); -} +#define to_s5p_ehci(hcd) (struct s5p_ehci_hcd *)(hcd_to_ehci(hcd)->priv) static void s5p_setup_vbus_gpio(struct platform_device *pdev) { + struct device *dev = &pdev->dev; int err; int gpio; - if (!pdev->dev.of_node) + if (!dev->of_node) return; - gpio = of_get_named_gpio(pdev->dev.of_node, - "samsung,vbus-gpio", 0); + gpio = of_get_named_gpio(dev->of_node, "samsung,vbus-gpio", 0); if (!gpio_is_valid(gpio)) return; - err = gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "ehci_vbus_gpio"); + err = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_HIGH, + "ehci_vbus_gpio"); if (err) - dev_err(&pdev->dev, "can't request ehci vbus gpio %d", gpio); + dev_err(dev, "can't request ehci vbus gpio %d", gpio); } static u64 ehci_s5p_dma_mask = DMA_BIT_MASK(32); @@ -133,13 +96,15 @@ static int s5p_ehci_probe(struct platform_device *pdev) s5p_setup_vbus_gpio(pdev); - s5p_ehci = devm_kzalloc(&pdev->dev, sizeof(struct s5p_ehci_hcd), - GFP_KERNEL); - if (!s5p_ehci) + hcd = usb_create_hcd(&s5p_ehci_hc_driver, + &pdev->dev, dev_name(&pdev->dev)); + if (!hcd) { + dev_err(&pdev->dev, "Unable to create HCD\n"); return -ENOMEM; - + } + s5p_ehci = to_s5p_ehci(hcd); phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); - if (IS_ERR_OR_NULL(phy)) { + if (IS_ERR(phy)) { /* Fallback to pdata */ if (!pdata) { dev_warn(&pdev->dev, "no platform data or transceiver defined\n"); @@ -152,16 +117,6 @@ static int s5p_ehci_probe(struct platform_device *pdev) s5p_ehci->otg = phy->otg; } - s5p_ehci->dev = &pdev->dev; - - hcd = usb_create_hcd(&s5p_ehci_hc_driver, &pdev->dev, - dev_name(&pdev->dev)); - if (!hcd) { - dev_err(&pdev->dev, "Unable to create HCD\n"); - return -ENOMEM; - } - - s5p_ehci->hcd = hcd; s5p_ehci->clk = devm_clk_get(&pdev->dev, "usbhost"); if (IS_ERR(s5p_ehci->clk)) { @@ -198,9 +153,12 @@ static int s5p_ehci_probe(struct platform_device *pdev) } if (s5p_ehci->otg) - s5p_ehci->otg->set_host(s5p_ehci->otg, &s5p_ehci->hcd->self); + s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self); - s5p_ehci_phy_enable(s5p_ehci); + if (s5p_ehci->phy) + usb_phy_init(s5p_ehci->phy); + else if (s5p_ehci->pdata->phy_init) + s5p_ehci->pdata->phy_init(pdev, USB_PHY_TYPE_HOST); ehci = hcd_to_ehci(hcd); ehci->caps = hcd->regs; @@ -214,12 +172,15 @@ static int s5p_ehci_probe(struct platform_device *pdev) goto fail_add_hcd; } - platform_set_drvdata(pdev, s5p_ehci); + platform_set_drvdata(pdev, hcd); return 0; fail_add_hcd: - s5p_ehci_phy_disable(s5p_ehci); + if (s5p_ehci->phy) + usb_phy_shutdown(s5p_ehci->phy); + else if (s5p_ehci->pdata->phy_exit) + s5p_ehci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST); fail_io: clk_disable_unprepare(s5p_ehci->clk); fail_clk: @@ -229,15 +190,18 @@ fail_clk: static int s5p_ehci_remove(struct platform_device *pdev) { - struct s5p_ehci_hcd *s5p_ehci = platform_get_drvdata(pdev); - struct usb_hcd *hcd = s5p_ehci->hcd; + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct s5p_ehci_hcd *s5p_ehci = to_s5p_ehci(hcd); usb_remove_hcd(hcd); if (s5p_ehci->otg) - s5p_ehci->otg->set_host(s5p_ehci->otg, &s5p_ehci->hcd->self); + s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self); - s5p_ehci_phy_disable(s5p_ehci); + if (s5p_ehci->phy) + usb_phy_shutdown(s5p_ehci->phy); + else if (s5p_ehci->pdata->phy_exit) + s5p_ehci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST); clk_disable_unprepare(s5p_ehci->clk); @@ -248,8 +212,7 @@ static int s5p_ehci_remove(struct platform_device *pdev) static void s5p_ehci_shutdown(struct platform_device *pdev) { - struct s5p_ehci_hcd *s5p_ehci = platform_get_drvdata(pdev); - struct usb_hcd *hcd = s5p_ehci->hcd; + struct usb_hcd *hcd = platform_get_drvdata(pdev); if (hcd->driver->shutdown) hcd->driver->shutdown(hcd); @@ -258,17 +221,22 @@ static void s5p_ehci_shutdown(struct platform_device *pdev) #ifdef CONFIG_PM static int s5p_ehci_suspend(struct device *dev) { - struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev); - struct usb_hcd *hcd = s5p_ehci->hcd; + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct s5p_ehci_hcd *s5p_ehci = to_s5p_ehci(hcd); + struct platform_device *pdev = to_platform_device(dev); + bool do_wakeup = device_may_wakeup(dev); int rc; rc = ehci_suspend(hcd, do_wakeup); if (s5p_ehci->otg) - s5p_ehci->otg->set_host(s5p_ehci->otg, &s5p_ehci->hcd->self); + s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self); - s5p_ehci_phy_disable(s5p_ehci); + if (s5p_ehci->phy) + usb_phy_shutdown(s5p_ehci->phy); + else if (s5p_ehci->pdata->phy_exit) + s5p_ehci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST); clk_disable_unprepare(s5p_ehci->clk); @@ -277,15 +245,19 @@ static int s5p_ehci_suspend(struct device *dev) static int s5p_ehci_resume(struct device *dev) { - struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev); - struct usb_hcd *hcd = s5p_ehci->hcd; + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct s5p_ehci_hcd *s5p_ehci = to_s5p_ehci(hcd); + struct platform_device *pdev = to_platform_device(dev); clk_prepare_enable(s5p_ehci->clk); if (s5p_ehci->otg) - s5p_ehci->otg->set_host(s5p_ehci->otg, &s5p_ehci->hcd->self); + s5p_ehci->otg->set_host(s5p_ehci->otg, &hcd->self); - s5p_ehci_phy_enable(s5p_ehci); + if (s5p_ehci->phy) + usb_phy_init(s5p_ehci->phy); + else if (s5p_ehci->pdata->phy_init) + s5p_ehci->pdata->phy_init(pdev, USB_PHY_TYPE_HOST); /* DMA burst Enable */ writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs)); @@ -322,5 +294,29 @@ static struct platform_driver s5p_ehci_driver = { .of_match_table = of_match_ptr(exynos_ehci_match), } }; +static const struct ehci_driver_overrides s5p_overrides __initdata = { + .extra_priv_size = sizeof(struct s5p_ehci_hcd), +}; + +static int __init ehci_s5p_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + ehci_init_driver(&s5p_ehci_hc_driver, &s5p_overrides); + return platform_driver_register(&s5p_ehci_driver); +} +module_init(ehci_s5p_init); + +static void __exit ehci_s5p_cleanup(void) +{ + platform_driver_unregister(&s5p_ehci_driver); +} +module_exit(ehci_s5p_cleanup); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_ALIAS("platform:s5p-ehci"); +MODULE_AUTHOR("Jingoo Han"); +MODULE_AUTHOR("Joonyoung Shim"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 010f686d8881..acff5b8f6e89 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -539,6 +539,7 @@ static void qh_link_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh) } qh->qh_state = QH_STATE_LINKED; qh->xacterrs = 0; + qh->exception = 0; /* update per-qh bandwidth for usbfs */ ehci_to_hcd(ehci)->self.bandwidth_allocated += qh->period @@ -602,15 +603,9 @@ static void qh_unlink_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh) static void start_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh) { - /* If the QH isn't linked then there's nothing we can do - * unless we were called during a giveback, in which case - * qh_completions() has to deal with it. - */ - if (qh->qh_state != QH_STATE_LINKED) { - if (qh->qh_state == QH_STATE_COMPLETING) - qh->needs_rescan = 1; + /* If the QH isn't linked then there's nothing we can do. */ + if (qh->qh_state != QH_STATE_LINKED) return; - } qh_unlink_periodic (ehci, qh); @@ -625,17 +620,13 @@ static void start_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh) qh->unlink_cycle = ehci->intr_unlink_cycle; /* New entries go at the end of the intr_unlink list */ - if (ehci->intr_unlink) - ehci->intr_unlink_last->unlink_next = qh; - else - ehci->intr_unlink = qh; - ehci->intr_unlink_last = qh; + list_add_tail(&qh->unlink_node, &ehci->intr_unlink); if (ehci->intr_unlinking) ; /* Avoid recursive calls */ else if (ehci->rh_state < EHCI_RH_RUNNING) ehci_handle_intr_unlinks(ehci); - else if (ehci->intr_unlink == qh) { + else if (ehci->intr_unlink.next == &qh->unlink_node) { ehci_enable_event(ehci, EHCI_HRTIMER_UNLINK_INTR, true); ++ehci->intr_unlink_cycle; } @@ -649,7 +640,8 @@ static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh) qh->qh_state = QH_STATE_IDLE; hw->hw_next = EHCI_LIST_END(ehci); - qh_completions(ehci, qh); + if (!list_empty(&qh->qtd_list)) + qh_completions(ehci, qh); /* reschedule QH iff another request is queued */ if (!list_empty(&qh->qtd_list) && ehci->rh_state == EHCI_RH_RUNNING) { @@ -792,7 +784,6 @@ static int qh_schedule(struct ehci_hcd *ehci, struct ehci_qh *qh) unsigned frame; /* 0..(qh->period - 1), or NO_FRAME */ struct ehci_qh_hw *hw = qh->hw; - qh_refresh(ehci, qh); hw->hw_next = EHCI_LIST_END(ehci); frame = qh->start; @@ -844,8 +835,6 @@ static int qh_schedule(struct ehci_hcd *ehci, struct ehci_qh *qh) } else ehci_dbg (ehci, "reused qh %p schedule\n", qh); - /* stuff into the periodic schedule */ - qh_link_periodic(ehci, qh); done: return status; } @@ -891,6 +880,12 @@ static int intr_submit ( qh = qh_append_tds(ehci, urb, qtd_list, epnum, &urb->ep->hcpriv); BUG_ON (qh == NULL); + /* stuff into the periodic schedule */ + if (qh->qh_state == QH_STATE_IDLE) { + qh_refresh(ehci, qh); + qh_link_periodic(ehci, qh); + } + /* ... update usbfs periodic stats */ ehci_to_hcd(ehci)->self.bandwidth_int_reqs++; @@ -911,7 +906,7 @@ static void scan_intr(struct ehci_hcd *ehci) list_for_each_entry_safe(qh, ehci->qh_scan_next, &ehci->intr_qh_list, intr_node) { - rescan: + /* clean any finished work for this qh */ if (!list_empty(&qh->qtd_list)) { int temp; @@ -924,12 +919,9 @@ static void scan_intr(struct ehci_hcd *ehci) * in qh_unlink_periodic(). */ temp = qh_completions(ehci, qh); - if (unlikely(qh->needs_rescan || - (list_empty(&qh->qtd_list) && - qh->qh_state == QH_STATE_LINKED))) + if (unlikely(temp || (list_empty(&qh->qtd_list) && + qh->qh_state == QH_STATE_LINKED))) start_unlink_intr(ehci, qh); - else if (temp != 0) - goto rescan; } } } diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c index 3565a300f401..b44d716ddc82 100644 --- a/drivers/usb/host/ehci-sh.c +++ b/drivers/usb/host/ehci-sh.c @@ -77,7 +77,6 @@ static const struct hc_driver ehci_sh_hc_driver = { static int ehci_hcd_sh_probe(struct platform_device *pdev) { - const struct hc_driver *driver = &ehci_sh_hc_driver; struct resource *res; struct ehci_sh_priv *priv; struct ehci_sh_platdata *pdata; @@ -170,7 +169,7 @@ fail_create_hcd: return ret; } -static int __exit ehci_hcd_sh_remove(struct platform_device *pdev) +static int ehci_hcd_sh_remove(struct platform_device *pdev) { struct ehci_sh_priv *priv = platform_get_drvdata(pdev); struct usb_hcd *hcd = priv->hcd; @@ -196,7 +195,7 @@ static void ehci_hcd_sh_shutdown(struct platform_device *pdev) static struct platform_driver ehci_hcd_sh_driver = { .probe = ehci_hcd_sh_probe, - .remove = __exit_p(ehci_hcd_sh_remove), + .remove = ehci_hcd_sh_remove, .shutdown = ehci_hcd_sh_shutdown, .driver = { .name = "sh_ehci", diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c index 466c1bb5b967..61ecfb3d52f5 100644 --- a/drivers/usb/host/ehci-spear.c +++ b/drivers/usb/host/ehci-spear.c @@ -1,5 +1,5 @@ /* -* Driver for EHCI HCD on SPEAR SOC +* Driver for EHCI HCD on SPEAr SOC * * Copyright (C) 2010 ST Micro Electronics, * Deepak Sikri <deepak.sikri@st.com> @@ -12,73 +12,32 @@ */ #include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> #include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/pm.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> -struct spear_ehci { - struct ehci_hcd ehci; - struct clk *clk; -}; - -#define to_spear_ehci(hcd) (struct spear_ehci *)hcd_to_ehci(hcd) +#include "ehci.h" -static void spear_start_ehci(struct spear_ehci *ehci) -{ - clk_prepare_enable(ehci->clk); -} +#define DRIVER_DESC "EHCI SPEAr driver" -static void spear_stop_ehci(struct spear_ehci *ehci) -{ - clk_disable_unprepare(ehci->clk); -} +static const char hcd_name[] = "SPEAr-ehci"; -static int ehci_spear_setup(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - - /* registers start at offset 0x0 */ - ehci->caps = hcd->regs; +struct spear_ehci { + struct clk *clk; +}; - return ehci_setup(hcd); -} +#define to_spear_ehci(hcd) (struct spear_ehci *)(hcd_to_ehci(hcd)->priv) -static const struct hc_driver ehci_spear_hc_driver = { - .description = hcd_name, - .product_desc = "SPEAr EHCI", - .hcd_priv_size = sizeof(struct spear_ehci), - - /* generic hardware linkage */ - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - /* basic lifecycle operations */ - .reset = ehci_spear_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* managing i/o requests and associated device resources */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - /* scheduling support */ - .get_frame_number = ehci_get_frame, - - /* root hub support */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; +static struct hc_driver __read_mostly ehci_spear_hc_driver; -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int ehci_spear_drv_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); @@ -94,7 +53,7 @@ static int ehci_spear_drv_resume(struct device *dev) ehci_resume(hcd, false); return 0; } -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM_SLEEP */ static SIMPLE_DEV_PM_OPS(ehci_spear_pm_ops, ehci_spear_drv_suspend, ehci_spear_drv_resume); @@ -104,7 +63,7 @@ static u64 spear_ehci_dma_mask = DMA_BIT_MASK(32); static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) { struct usb_hcd *hcd ; - struct spear_ehci *ehci; + struct spear_ehci *sehci; struct resource *res; struct clk *usbh_clk; const struct hc_driver *driver = &ehci_spear_hc_driver; @@ -161,10 +120,13 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) goto err_put_hcd; } - ehci = (struct spear_ehci *)hcd_to_ehci(hcd); - ehci->clk = usbh_clk; + sehci = to_spear_ehci(hcd); + sehci->clk = usbh_clk; + + /* registers start at offset 0x0 */ + hcd_to_ehci(hcd)->caps = hcd->regs; - spear_start_ehci(ehci); + clk_prepare_enable(sehci->clk); retval = usb_add_hcd(hcd, irq, IRQF_SHARED); if (retval) goto err_stop_ehci; @@ -172,7 +134,7 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) return retval; err_stop_ehci: - spear_stop_ehci(ehci); + clk_disable_unprepare(sehci->clk); err_put_hcd: usb_put_hcd(hcd); fail: @@ -184,7 +146,7 @@ fail: static int spear_ehci_hcd_drv_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); - struct spear_ehci *ehci_p = to_spear_ehci(hcd); + struct spear_ehci *sehci = to_spear_ehci(hcd); if (!hcd) return 0; @@ -192,8 +154,8 @@ static int spear_ehci_hcd_drv_remove(struct platform_device *pdev) BUG(); usb_remove_hcd(hcd); - if (ehci_p->clk) - spear_stop_ehci(ehci_p); + if (sehci->clk) + clk_disable_unprepare(sehci->clk); usb_put_hcd(hcd); return 0; @@ -216,4 +178,29 @@ static struct platform_driver spear_ehci_hcd_driver = { } }; +static const struct ehci_driver_overrides spear_overrides __initdata = { + .extra_priv_size = sizeof(struct spear_ehci), +}; + +static int __init ehci_spear_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + + ehci_init_driver(&ehci_spear_hc_driver, &spear_overrides); + return platform_driver_register(&spear_ehci_hcd_driver); +} +module_init(ehci_spear_init); + +static void __exit ehci_spear_cleanup(void) +{ + platform_driver_unregister(&spear_ehci_hcd_driver); +} +module_exit(ehci_spear_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_ALIAS("platform:spear-ehci"); +MODULE_AUTHOR("Deepak Sikri"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 568aecc7075b..e3eddc31ac83 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -28,6 +28,7 @@ #include <linux/pm_runtime.h> #include <linux/usb/ehci_def.h> #include <linux/usb/tegra_usb_phy.h> +#include <linux/clk/tegra.h> #define TEGRA_USB_BASE 0xC5000000 #define TEGRA_USB2_BASE 0xC5004000 @@ -610,7 +611,7 @@ static const struct dev_pm_ops tegra_ehci_pm_ops = { /* Bits of PORTSC1, which will get cleared by writing 1 into them */ #define TEGRA_PORTSC1_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) -void tegra_ehci_set_pts(struct usb_phy *x, u8 pts_val) +static void tegra_ehci_set_pts(struct usb_phy *x, u8 pts_val) { unsigned long val; struct usb_hcd *hcd = bus_to_hcd(x->otg->host); @@ -621,9 +622,8 @@ void tegra_ehci_set_pts(struct usb_phy *x, u8 pts_val) val |= TEGRA_USB_PORTSC1_PTS(pts_val & 3); writel(val, base + TEGRA_USB_PORTSC1); } -EXPORT_SYMBOL_GPL(tegra_ehci_set_pts); -void tegra_ehci_set_phcd(struct usb_phy *x, bool enable) +static void tegra_ehci_set_phcd(struct usb_phy *x, bool enable) { unsigned long val; struct usb_hcd *hcd = bus_to_hcd(x->otg->host); @@ -636,7 +636,6 @@ void tegra_ehci_set_phcd(struct usb_phy *x, bool enable) val &= ~TEGRA_USB_PORTSC1_PHCD; writel(val, base + TEGRA_USB_PORTSC1); } -EXPORT_SYMBOL_GPL(tegra_ehci_set_phcd); static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32); @@ -691,6 +690,10 @@ static int tegra_ehci_probe(struct platform_device *pdev) if (err) goto fail_clk; + tegra_periph_reset_assert(tegra->clk); + udelay(1); + tegra_periph_reset_deassert(tegra->clk); + tegra->needs_double_reset = of_property_read_bool(pdev->dev.of_node, "nvidia,needs-double-reset"); @@ -733,7 +736,9 @@ static int tegra_ehci_probe(struct platform_device *pdev) tegra->phy = tegra_usb_phy_open(&pdev->dev, instance, hcd->regs, pdata->phy_config, - TEGRA_USB_PHY_MODE_HOST); + TEGRA_USB_PHY_MODE_HOST, + tegra_ehci_set_pts, + tegra_ehci_set_phcd); if (IS_ERR(tegra->phy)) { dev_err(&pdev->dev, "Failed to open USB phy\n"); err = -ENXIO; @@ -755,7 +760,7 @@ static int tegra_ehci_probe(struct platform_device *pdev) err = usb_phy_set_suspend(hcd->phy, 0); if (err) { dev_err(&pdev->dev, "Failed to power on the phy\n"); - goto fail; + goto fail_phy; } tegra->host_resumed = 1; @@ -765,17 +770,17 @@ static int tegra_ehci_probe(struct platform_device *pdev) if (!irq) { dev_err(&pdev->dev, "Failed to get IRQ\n"); err = -ENODEV; - goto fail; + goto fail_phy; } -#ifdef CONFIG_USB_OTG_UTILS if (pdata->operating_mode == TEGRA_USB_OTG) { tegra->transceiver = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); - if (!IS_ERR_OR_NULL(tegra->transceiver)) + if (!IS_ERR(tegra->transceiver)) otg_set_host(tegra->transceiver->otg, &hcd->self); + } else { + tegra->transceiver = ERR_PTR(-ENODEV); } -#endif err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) { @@ -794,10 +799,9 @@ static int tegra_ehci_probe(struct platform_device *pdev) return err; fail: -#ifdef CONFIG_USB_OTG_UTILS - if (!IS_ERR_OR_NULL(tegra->transceiver)) + if (!IS_ERR(tegra->transceiver)) otg_set_host(tegra->transceiver->otg, NULL); -#endif +fail_phy: usb_phy_shutdown(hcd->phy); fail_io: clk_disable_unprepare(tegra->clk); @@ -815,10 +819,8 @@ static int tegra_ehci_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); -#ifdef CONFIG_USB_OTG_UTILS - if (!IS_ERR_OR_NULL(tegra->transceiver)) + if (!IS_ERR(tegra->transceiver)) otg_set_host(tegra->transceiver->otg, NULL); -#endif usb_phy_shutdown(hcd->phy); usb_remove_hcd(hcd); diff --git a/drivers/usb/host/ehci-timer.c b/drivers/usb/host/ehci-timer.c index c3fa1305f830..11e5b32f73e9 100644 --- a/drivers/usb/host/ehci-timer.c +++ b/drivers/usb/host/ehci-timer.c @@ -113,8 +113,8 @@ static void ehci_poll_ASS(struct ehci_hcd *ehci) if (want != actual) { - /* Poll again later, but give up after about 20 ms */ - if (ehci->ASS_poll_count++ < 20) { + /* Poll again later, but give up after about 2-4 ms */ + if (ehci->ASS_poll_count++ < 2) { ehci_enable_event(ehci, EHCI_HRTIMER_POLL_ASS, true); return; } @@ -159,8 +159,8 @@ static void ehci_poll_PSS(struct ehci_hcd *ehci) if (want != actual) { - /* Poll again later, but give up after about 20 ms */ - if (ehci->PSS_poll_count++ < 20) { + /* Poll again later, but give up after about 2-4 ms */ + if (ehci->PSS_poll_count++ < 2) { ehci_enable_event(ehci, EHCI_HRTIMER_POLL_PSS, true); return; } @@ -229,18 +229,19 @@ static void ehci_handle_intr_unlinks(struct ehci_hcd *ehci) * process all the QHs on the list. */ ehci->intr_unlinking = true; - while (ehci->intr_unlink) { - struct ehci_qh *qh = ehci->intr_unlink; + while (!list_empty(&ehci->intr_unlink)) { + struct ehci_qh *qh; + qh = list_first_entry(&ehci->intr_unlink, struct ehci_qh, + unlink_node); if (!stopped && qh->unlink_cycle == ehci->intr_unlink_cycle) break; - ehci->intr_unlink = qh->unlink_next; - qh->unlink_next = NULL; + list_del(&qh->unlink_node); end_unlink_intr(ehci, qh); } /* Handle remaining entries later */ - if (ehci->intr_unlink) { + if (!list_empty(&ehci->intr_unlink)) { ehci_enable_event(ehci, EHCI_HRTIMER_UNLINK_INTR, true); ++ehci->intr_unlink_cycle; } @@ -295,8 +296,7 @@ static void end_free_itds(struct ehci_hcd *ehci) /* Handle lost (or very late) IAA interrupts */ static void ehci_iaa_watchdog(struct ehci_hcd *ehci) { - if (ehci->rh_state != EHCI_RH_RUNNING) - return; + u32 cmd, status; /* * Lost IAA irqs wedge things badly; seen first with a vt8235. @@ -304,34 +304,32 @@ static void ehci_iaa_watchdog(struct ehci_hcd *ehci) * (a) SMP races against real IAA firing and retriggering, and * (b) clean HC shutdown, when IAA watchdog was pending. */ - if (1) { - u32 cmd, status; - - /* If we get here, IAA is *REALLY* late. It's barely - * conceivable that the system is so busy that CMD_IAAD - * is still legitimately set, so let's be sure it's - * clear before we read STS_IAA. (The HC should clear - * CMD_IAAD when it sets STS_IAA.) - */ - cmd = ehci_readl(ehci, &ehci->regs->command); - - /* - * If IAA is set here it either legitimately triggered - * after the watchdog timer expired (_way_ late, so we'll - * still count it as lost) ... or a silicon erratum: - * - VIA seems to set IAA without triggering the IRQ; - * - IAAD potentially cleared without setting IAA. - */ - status = ehci_readl(ehci, &ehci->regs->status); - if ((status & STS_IAA) || !(cmd & CMD_IAAD)) { - COUNT(ehci->stats.lost_iaa); - ehci_writel(ehci, STS_IAA, &ehci->regs->status); - } + if (!ehci->iaa_in_progress || ehci->rh_state != EHCI_RH_RUNNING) + return; + + /* If we get here, IAA is *REALLY* late. It's barely + * conceivable that the system is so busy that CMD_IAAD + * is still legitimately set, so let's be sure it's + * clear before we read STS_IAA. (The HC should clear + * CMD_IAAD when it sets STS_IAA.) + */ + cmd = ehci_readl(ehci, &ehci->regs->command); - ehci_vdbg(ehci, "IAA watchdog: status %x cmd %x\n", - status, cmd); - end_unlink_async(ehci); + /* + * If IAA is set here it either legitimately triggered + * after the watchdog timer expired (_way_ late, so we'll + * still count it as lost) ... or a silicon erratum: + * - VIA seems to set IAA without triggering the IRQ; + * - IAAD potentially cleared without setting IAA. + */ + status = ehci_readl(ehci, &ehci->regs->status); + if ((status & STS_IAA) || !(cmd & CMD_IAAD)) { + COUNT(ehci->stats.lost_iaa); + ehci_writel(ehci, STS_IAA, &ehci->regs->status); } + + ehci_dbg(ehci, "IAA watchdog: status %x cmd %x\n", status, cmd); + end_unlink_async(ehci); } diff --git a/drivers/usb/host/ehci-vt8500.c b/drivers/usb/host/ehci-vt8500.c deleted file mode 100644 index 7ecf709610ba..000000000000 --- a/drivers/usb/host/ehci-vt8500.c +++ /dev/null @@ -1,150 +0,0 @@ -/* - * drivers/usb/host/ehci-vt8500.c - * - * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> - * - * Based on ehci-au1xxx.c - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/err.h> -#include <linux/of.h> -#include <linux/platform_device.h> - -static const struct hc_driver vt8500_ehci_hc_driver = { - .description = hcd_name, - .product_desc = "VT8500 EHCI", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - /* - * basic lifecycle operations - */ - .reset = ehci_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; - -static u64 vt8500_ehci_dma_mask = DMA_BIT_MASK(32); - -static int vt8500_ehci_drv_probe(struct platform_device *pdev) -{ - struct usb_hcd *hcd; - struct ehci_hcd *ehci; - struct resource *res; - int ret; - - if (usb_disabled()) - return -ENODEV; - - /* - * Right now device-tree probed devices don't get dma_mask set. - * Since shared usb code relies on it, set it here for now. - * Once we have dma capability bindings this can go away. - */ - if (!pdev->dev.dma_mask) - pdev->dev.dma_mask = &vt8500_ehci_dma_mask; - - if (pdev->resource[1].flags != IORESOURCE_IRQ) { - pr_debug("resource[1] is not IORESOURCE_IRQ"); - return -ENOMEM; - } - hcd = usb_create_hcd(&vt8500_ehci_hc_driver, &pdev->dev, "VT8500"); - if (!hcd) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - - hcd->regs = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(hcd->regs)) { - ret = PTR_ERR(hcd->regs); - goto err1; - } - - ehci = hcd_to_ehci(hcd); - ehci->caps = hcd->regs; - - ret = usb_add_hcd(hcd, pdev->resource[1].start, - IRQF_SHARED); - if (ret == 0) { - platform_set_drvdata(pdev, hcd); - return ret; - } - -err1: - usb_put_hcd(hcd); - return ret; -} - -static int vt8500_ehci_drv_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - usb_remove_hcd(hcd); - usb_put_hcd(hcd); - platform_set_drvdata(pdev, NULL); - - return 0; -} - -static const struct of_device_id vt8500_ehci_ids[] = { - { .compatible = "via,vt8500-ehci", }, - { .compatible = "wm,prizm-ehci", }, - {} -}; - -static struct platform_driver vt8500_ehci_driver = { - .probe = vt8500_ehci_drv_probe, - .remove = vt8500_ehci_drv_remove, - .shutdown = usb_hcd_platform_shutdown, - .driver = { - .name = "vt8500-ehci", - .owner = THIS_MODULE, - .of_match_table = of_match_ptr(vt8500_ehci_ids), - } -}; - -MODULE_ALIAS("platform:vt8500-ehci"); -MODULE_DEVICE_TABLE(of, vt8500_ehci_ids); diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 36c3a8210595..7c978b23520d 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -121,6 +121,7 @@ struct ehci_hcd { /* one per controller */ bool scanning:1; bool need_rescan:1; bool intr_unlinking:1; + bool iaa_in_progress:1; bool async_unlinking:1; bool shutdown:1; struct ehci_qh *qh_scan_next; @@ -128,9 +129,8 @@ struct ehci_hcd { /* one per controller */ /* async schedule support */ struct ehci_qh *async; struct ehci_qh *dummy; /* For AMD quirk use */ - struct ehci_qh *async_unlink; - struct ehci_qh *async_unlink_last; - struct ehci_qh *async_iaa; + struct list_head async_unlink; + struct list_head async_idle; unsigned async_unlink_cycle; unsigned async_count; /* async activity count */ @@ -143,8 +143,7 @@ struct ehci_hcd { /* one per controller */ unsigned i_thresh; /* uframes HC might cache */ union ehci_shadow *pshadow; /* mirror hw periodic table */ - struct ehci_qh *intr_unlink; - struct ehci_qh *intr_unlink_last; + struct list_head intr_unlink; unsigned intr_unlink_cycle; unsigned now_frame; /* frame from HC hardware */ unsigned last_iso_frame; /* last frame scanned for iso */ @@ -200,6 +199,7 @@ struct ehci_hcd { /* one per controller */ unsigned use_dummy_qh:1; /* AMD Frame List table quirk*/ unsigned has_synopsys_hc_bug:1; /* Synopsys HC */ unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */ + unsigned need_oc_pp_cycle:1; /* MPC834X port power */ /* required for usb32 quirk */ #define OHCI_CTRL_HCFS (3 << 6) @@ -380,11 +380,10 @@ struct ehci_qh { struct list_head qtd_list; /* sw qtd list */ struct list_head intr_node; /* list of intr QHs */ struct ehci_qtd *dummy; - struct ehci_qh *unlink_next; /* next on unlink list */ + struct list_head unlink_node; unsigned unlink_cycle; - u8 needs_rescan; /* Dequeue during giveback */ u8 qh_state; #define QH_STATE_LINKED 1 /* HC sees this */ #define QH_STATE_UNLINK 2 /* HC may still see this */ @@ -407,6 +406,9 @@ struct ehci_qh { struct usb_device *dev; /* access to TT */ unsigned is_out:1; /* bulk or intr OUT */ unsigned clearing_tt:1; /* Clear-TT-Buf in progress */ + unsigned dequeue_during_giveback:1; + unsigned exception:1; /* got a fault, or an unlink + was requested */ }; /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index e3b7e85120e4..114583a8e92b 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -17,7 +17,6 @@ #include <linux/platform_data/usb-exynos.h> #include <linux/usb/phy.h> #include <linux/usb/samsung_usb_phy.h> -#include <plat/usb-phy.h> struct exynos_ohci_hcd { struct device *dev; @@ -34,7 +33,7 @@ static void exynos_ohci_phy_enable(struct exynos_ohci_hcd *exynos_ohci) if (exynos_ohci->phy) usb_phy_init(exynos_ohci->phy); - else if (exynos_ohci->pdata->phy_init) + else if (exynos_ohci->pdata && exynos_ohci->pdata->phy_init) exynos_ohci->pdata->phy_init(pdev, USB_PHY_TYPE_HOST); } @@ -44,7 +43,7 @@ static void exynos_ohci_phy_disable(struct exynos_ohci_hcd *exynos_ohci) if (exynos_ohci->phy) usb_phy_shutdown(exynos_ohci->phy); - else if (exynos_ohci->pdata->phy_exit) + else if (exynos_ohci->pdata && exynos_ohci->pdata->phy_exit) exynos_ohci->pdata->phy_exit(pdev, USB_PHY_TYPE_HOST); } @@ -127,8 +126,12 @@ static int exynos_ohci_probe(struct platform_device *pdev) if (!exynos_ohci) return -ENOMEM; + if (of_device_is_compatible(pdev->dev.of_node, + "samsung,exynos5440-ohci")) + goto skip_phy; + phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); - if (IS_ERR_OR_NULL(phy)) { + if (IS_ERR(phy)) { /* Fallback to pdata */ if (!pdata) { dev_warn(&pdev->dev, "no platform data or transceiver defined\n"); @@ -141,6 +144,8 @@ static int exynos_ohci_probe(struct platform_device *pdev) exynos_ohci->otg = phy->otg; } +skip_phy: + exynos_ohci->dev = &pdev->dev; hcd = usb_create_hcd(&exynos_ohci_hc_driver, &pdev->dev, @@ -311,6 +316,7 @@ static const struct dev_pm_ops exynos_ohci_pm_ops = { #ifdef CONFIG_OF static const struct of_device_id exynos_ohci_match[] = { { .compatible = "samsung,exynos4210-ohci" }, + { .compatible = "samsung,exynos5440-ohci" }, {}, }; MODULE_DEVICE_TABLE(of, exynos_ohci_match); diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 180a2b01db56..9e6de9586ae4 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1102,12 +1102,12 @@ MODULE_LICENSE ("GPL"); #if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S3C64XX) #include "ohci-s3c2410.c" -#define PLATFORM_DRIVER ohci_hcd_s3c2410_driver +#define S3C2410_PLATFORM_DRIVER ohci_hcd_s3c2410_driver #endif #ifdef CONFIG_USB_OHCI_EXYNOS #include "ohci-exynos.c" -#define PLATFORM_DRIVER exynos_ohci_driver +#define EXYNOS_PLATFORM_DRIVER exynos_ohci_driver #endif #ifdef CONFIG_USB_OHCI_HCD_OMAP1 @@ -1127,25 +1127,24 @@ MODULE_LICENSE ("GPL"); #ifdef CONFIG_ARCH_EP93XX #include "ohci-ep93xx.c" -#define PLATFORM_DRIVER ohci_hcd_ep93xx_driver +#define EP93XX_PLATFORM_DRIVER ohci_hcd_ep93xx_driver #endif #ifdef CONFIG_ARCH_AT91 #include "ohci-at91.c" -#define PLATFORM_DRIVER ohci_hcd_at91_driver +#define AT91_PLATFORM_DRIVER ohci_hcd_at91_driver #endif #ifdef CONFIG_ARCH_LPC32XX #include "ohci-nxp.c" -#define PLATFORM_DRIVER usb_hcd_nxp_driver +#define NXP_PLATFORM_DRIVER usb_hcd_nxp_driver #endif #ifdef CONFIG_ARCH_DAVINCI_DA8XX #include "ohci-da8xx.c" -#define PLATFORM_DRIVER ohci_hcd_da8xx_driver +#define DAVINCI_PLATFORM_DRIVER ohci_hcd_da8xx_driver #endif - #ifdef CONFIG_USB_OHCI_HCD_PPC_OF #include "ohci-ppc-of.c" #define OF_PLATFORM_DRIVER ohci_hcd_ppc_of_driver @@ -1153,7 +1152,7 @@ MODULE_LICENSE ("GPL"); #ifdef CONFIG_PLAT_SPEAR #include "ohci-spear.c" -#define PLATFORM_DRIVER spear_ohci_hcd_driver +#define SPEAR_PLATFORM_DRIVER spear_ohci_hcd_driver #endif #ifdef CONFIG_PPC_PS3 @@ -1199,7 +1198,14 @@ MODULE_LICENSE ("GPL"); !defined(SA1111_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && \ !defined(SM501_OHCI_DRIVER) && \ - !defined(TMIO_OHCI_DRIVER) + !defined(TMIO_OHCI_DRIVER) && \ + !defined(S3C2410_PLATFORM_DRIVER) && \ + !defined(EXYNOS_PLATFORM_DRIVER) && \ + !defined(EP93XX_PLATFORM_DRIVER) && \ + !defined(AT91_PLATFORM_DRIVER) && \ + !defined(NXP_PLATFORM_DRIVER) && \ + !defined(DAVINCI_PLATFORM_DRIVER) && \ + !defined(SPEAR_PLATFORM_DRIVER) #error "missing bus glue for ohci-hcd" #endif @@ -1277,9 +1283,79 @@ static int __init ohci_hcd_mod_init(void) goto error_tmio; #endif +#ifdef S3C2410_PLATFORM_DRIVER + retval = platform_driver_register(&S3C2410_PLATFORM_DRIVER); + if (retval < 0) + goto error_s3c2410; +#endif + +#ifdef EXYNOS_PLATFORM_DRIVER + retval = platform_driver_register(&EXYNOS_PLATFORM_DRIVER); + if (retval < 0) + goto error_exynos; +#endif + +#ifdef EP93XX_PLATFORM_DRIVER + retval = platform_driver_register(&EP93XX_PLATFORM_DRIVER); + if (retval < 0) + goto error_ep93xx; +#endif + +#ifdef AT91_PLATFORM_DRIVER + retval = platform_driver_register(&AT91_PLATFORM_DRIVER); + if (retval < 0) + goto error_at91; +#endif + +#ifdef NXP_PLATFORM_DRIVER + retval = platform_driver_register(&NXP_PLATFORM_DRIVER); + if (retval < 0) + goto error_nxp; +#endif + +#ifdef DAVINCI_PLATFORM_DRIVER + retval = platform_driver_register(&DAVINCI_PLATFORM_DRIVER); + if (retval < 0) + goto error_davinci; +#endif + +#ifdef SPEAR_PLATFORM_DRIVER + retval = platform_driver_register(&SPEAR_PLATFORM_DRIVER); + if (retval < 0) + goto error_spear; +#endif + return retval; /* Error path */ +#ifdef SPEAR_PLATFORM_DRIVER + platform_driver_unregister(&SPEAR_PLATFORM_DRIVER); + error_spear: +#endif +#ifdef DAVINCI_PLATFORM_DRIVER + platform_driver_unregister(&DAVINCI_PLATFORM_DRIVER); + error_davinci: +#endif +#ifdef NXP_PLATFORM_DRIVER + platform_driver_unregister(&NXP_PLATFORM_DRIVER); + error_nxp: +#endif +#ifdef AT91_PLATFORM_DRIVER + platform_driver_unregister(&AT91_PLATFORM_DRIVER); + error_at91: +#endif +#ifdef EP93XX_PLATFORM_DRIVER + platform_driver_unregister(&EP93XX_PLATFORM_DRIVER); + error_ep93xx: +#endif +#ifdef EXYNOS_PLATFORM_DRIVER + platform_driver_unregister(&EXYNOS_PLATFORM_DRIVER); + error_exynos: +#endif +#ifdef S3C2410_PLATFORM_DRIVER + platform_driver_unregister(&S3C2410_PLATFORM_DRIVER); + error_s3c2410: +#endif #ifdef TMIO_OHCI_DRIVER platform_driver_unregister(&TMIO_OHCI_DRIVER); error_tmio: @@ -1300,17 +1376,17 @@ static int __init ohci_hcd_mod_init(void) platform_driver_unregister(&OF_PLATFORM_DRIVER); error_of_platform: #endif -#ifdef PLATFORM_DRIVER - platform_driver_unregister(&PLATFORM_DRIVER); - error_platform: +#ifdef OMAP3_PLATFORM_DRIVER + platform_driver_unregister(&OMAP3_PLATFORM_DRIVER); + error_omap3_platform: #endif #ifdef OMAP1_PLATFORM_DRIVER platform_driver_unregister(&OMAP1_PLATFORM_DRIVER); error_omap1_platform: #endif -#ifdef OMAP3_PLATFORM_DRIVER - platform_driver_unregister(&OMAP3_PLATFORM_DRIVER); - error_omap3_platform: +#ifdef PLATFORM_DRIVER + platform_driver_unregister(&PLATFORM_DRIVER); + error_platform: #endif #ifdef PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER); @@ -1329,6 +1405,27 @@ module_init(ohci_hcd_mod_init); static void __exit ohci_hcd_mod_exit(void) { +#ifdef SPEAR_PLATFORM_DRIVER + platform_driver_unregister(&SPEAR_PLATFORM_DRIVER); +#endif +#ifdef DAVINCI_PLATFORM_DRIVER + platform_driver_unregister(&DAVINCI_PLATFORM_DRIVER); +#endif +#ifdef NXP_PLATFORM_DRIVER + platform_driver_unregister(&NXP_PLATFORM_DRIVER); +#endif +#ifdef AT91_PLATFORM_DRIVER + platform_driver_unregister(&AT91_PLATFORM_DRIVER); +#endif +#ifdef EP93XX_PLATFORM_DRIVER + platform_driver_unregister(&EP93XX_PLATFORM_DRIVER); +#endif +#ifdef EXYNOS_PLATFORM_DRIVER + platform_driver_unregister(&EXYNOS_PLATFORM_DRIVER); +#endif +#ifdef S3C2410_PLATFORM_DRIVER + platform_driver_unregister(&S3C2410_PLATFORM_DRIVER); +#endif #ifdef TMIO_OHCI_DRIVER platform_driver_unregister(&TMIO_OHCI_DRIVER); #endif @@ -1344,12 +1441,15 @@ static void __exit ohci_hcd_mod_exit(void) #ifdef OF_PLATFORM_DRIVER platform_driver_unregister(&OF_PLATFORM_DRIVER); #endif -#ifdef PLATFORM_DRIVER - platform_driver_unregister(&PLATFORM_DRIVER); -#endif #ifdef OMAP3_PLATFORM_DRIVER platform_driver_unregister(&OMAP3_PLATFORM_DRIVER); #endif +#ifdef OMAP1_PLATFORM_DRIVER + platform_driver_unregister(&OMAP1_PLATFORM_DRIVER); +#endif +#ifdef PLATFORM_DRIVER + platform_driver_unregister(&PLATFORM_DRIVER); +#endif #ifdef PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER); #endif diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index db09dae7b557..60ff4220e8b4 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -580,14 +580,8 @@ static int ohci_start_port_reset (struct usb_hcd *hcd, unsigned port) /* See usb 7.1.7.5: root hubs must issue at least 50 msec reset signaling, * not necessarily continuous ... to guard against resume signaling. - * The short timeout is safe for non-root hubs, and is backward-compatible - * with earlier Linux hosts. */ -#ifdef CONFIG_USB_SUSPEND #define PORT_RESET_MSEC 50 -#else -#define PORT_RESET_MSEC 10 -#endif /* this timer value might be vendor-specific ... */ #define PORT_RESET_HW_MSEC 10 diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c index eb35d9630237..ddfc31427bc0 100644 --- a/drivers/usb/host/ohci-omap3.c +++ b/drivers/usb/host/ohci-omap3.c @@ -31,6 +31,8 @@ #include <linux/platform_device.h> #include <linux/pm_runtime.h> +#include <linux/of.h> +#include <linux/dma-mapping.h> /*-------------------------------------------------------------------------*/ @@ -112,6 +114,8 @@ static const struct hc_driver ohci_omap3_hc_driver = { /*-------------------------------------------------------------------------*/ +static u64 omap_ohci_dma_mask = DMA_BIT_MASK(32); + /* * configure so an HC device and id are always provided * always called with process context; sleeping is OK @@ -141,14 +145,13 @@ static int ohci_hcd_omap3_probe(struct platform_device *pdev) return -ENODEV; } - irq = platform_get_irq_byname(pdev, "ohci-irq"); + irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(dev, "OHCI irq failed\n"); return -ENODEV; } - res = platform_get_resource_byname(pdev, - IORESOURCE_MEM, "ohci"); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(dev, "UHH OHCI get resource failed\n"); return -ENOMEM; @@ -160,6 +163,13 @@ static int ohci_hcd_omap3_probe(struct platform_device *pdev) return -ENOMEM; } + /* + * Right now device-tree probed devices don't get dma_mask set. + * Since shared usb code relies on it, set it here for now. + * Once we have dma capability bindings this can go away. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &omap_ohci_dma_mask; hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev, dev_name(dev)); @@ -229,12 +239,20 @@ static void ohci_hcd_omap3_shutdown(struct platform_device *pdev) hcd->driver->shutdown(hcd); } +static const struct of_device_id omap_ohci_dt_ids[] = { + { .compatible = "ti,ohci-omap3" }, + { } +}; + +MODULE_DEVICE_TABLE(of, omap_ohci_dt_ids); + static struct platform_driver ohci_hcd_omap3_driver = { .probe = ohci_hcd_omap3_probe, .remove = ohci_hcd_omap3_remove, .shutdown = ohci_hcd_omap3_shutdown, .driver = { .name = "ohci-omap3", + .of_match_table = of_match_ptr(omap_ohci_dt_ids), }, }; diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index d62f0404baaa..15ed7e8d887f 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1755,7 +1755,7 @@ sl811h_probe(struct platform_device *dev) /* for this device there's no useful distinction between the controller * and its root hub, except that the root hub only gets direct PM calls - * when CONFIG_USB_SUSPEND is enabled. + * when CONFIG_PM_RUNTIME is enabled. */ static int diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 5efdffe32365..5c124bf5d018 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -3141,10 +3141,11 @@ static int u132_probe(struct platform_device *pdev) #ifdef CONFIG_PM -/* for this device there's no useful distinction between the controller -* and its root hub, except that the root hub only gets direct PM calls -* when CONFIG_USB_SUSPEND is enabled. -*/ +/* + * for this device there's no useful distinction between the controller + * and its root hub, except that the root hub only gets direct PM calls + * when CONFIG_PM_RUNTIME is enabled. + */ static int u132_suspend(struct platform_device *pdev, pm_message_t state) { struct usb_hcd *hcd = platform_get_drvdata(pdev); diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 68914429482f..187a3ec1069a 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1075,7 +1075,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) set_bit(port_index, &bus_state->bus_suspended); } /* USB core sets remote wake mask for USB 3.0 hubs, - * including the USB 3.0 roothub, but only if CONFIG_USB_SUSPEND + * including the USB 3.0 roothub, but only if CONFIG_PM_RUNTIME * is enabled, so also enable remote wake here. */ if (hcd->self.root_hub->do_remote_wakeup) { diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 6dc238c592bc..965b539bc474 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -51,7 +51,7 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci, return NULL; } - memset(seg->trbs, 0, SEGMENT_SIZE); + memset(seg->trbs, 0, TRB_SEGMENT_SIZE); /* If the cycle state is 0, set the cycle bit to 1 for all the TRBs */ if (cycle_state == 0) { for (i = 0; i < TRBS_PER_SEGMENT; i++) @@ -467,7 +467,7 @@ struct xhci_ring *xhci_dma_to_transfer_ring( { if (ep->ep_state & EP_HAS_STREAMS) return radix_tree_lookup(&ep->stream_info->trb_address_map, - address >> SEGMENT_SHIFT); + address >> TRB_SEGMENT_SHIFT); return ep->ring; } @@ -478,7 +478,7 @@ static struct xhci_ring *dma_to_stream_ring( u64 address) { return radix_tree_lookup(&stream_info->trb_address_map, - address >> SEGMENT_SHIFT); + address >> TRB_SEGMENT_SHIFT); } #endif /* CONFIG_USB_XHCI_HCD_DEBUGGING */ @@ -514,7 +514,7 @@ static int xhci_test_radix_tree(struct xhci_hcd *xhci, cur_ring = stream_info->stream_rings[cur_stream]; for (addr = cur_ring->first_seg->dma; - addr < cur_ring->first_seg->dma + SEGMENT_SIZE; + addr < cur_ring->first_seg->dma + TRB_SEGMENT_SIZE; addr += trb_size) { mapped_ring = dma_to_stream_ring(stream_info, addr); if (cur_ring != mapped_ring) { @@ -662,7 +662,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, cur_stream, (unsigned long long) addr); key = (unsigned long) - (cur_ring->first_seg->dma >> SEGMENT_SHIFT); + (cur_ring->first_seg->dma >> TRB_SEGMENT_SHIFT); ret = radix_tree_insert(&stream_info->trb_address_map, key, cur_ring); if (ret) { @@ -693,7 +693,7 @@ cleanup_rings: if (cur_ring) { addr = cur_ring->first_seg->dma; radix_tree_delete(&stream_info->trb_address_map, - addr >> SEGMENT_SHIFT); + addr >> TRB_SEGMENT_SHIFT); xhci_ring_free(xhci, cur_ring); stream_info->stream_rings[cur_stream] = NULL; } @@ -764,7 +764,7 @@ void xhci_free_stream_info(struct xhci_hcd *xhci, if (cur_ring) { addr = cur_ring->first_seg->dma; radix_tree_delete(&stream_info->trb_address_map, - addr >> SEGMENT_SHIFT); + addr >> TRB_SEGMENT_SHIFT); xhci_ring_free(xhci, cur_ring); stream_info->stream_rings[cur_stream] = NULL; } @@ -2305,7 +2305,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) * so we pick the greater alignment need. */ xhci->segment_pool = dma_pool_create("xHCI ring segments", dev, - SEGMENT_SIZE, 64, xhci->page_size); + TRB_SEGMENT_SIZE, 64, xhci->page_size); /* See Table 46 and Note on Figure 55 */ xhci->device_pool = dma_pool_create("xHCI input/output contexts", dev, diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 53b8f89a0b1c..b4aa79d154b2 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -417,9 +417,9 @@ static void compliance_mode_recovery(unsigned long arg) * Compliance Mode Detected. Letting USB Core * handle the Warm Reset */ - xhci_dbg(xhci, "Compliance Mode Detected->Port %d!\n", + xhci_dbg(xhci, "Compliance mode detected->port %d\n", i + 1); - xhci_dbg(xhci, "Attempting Recovery routine!\n"); + xhci_dbg(xhci, "Attempting compliance mode recovery\n"); hcd = xhci->shared_hcd; if (hcd->state == HC_STATE_SUSPENDED) @@ -457,7 +457,7 @@ static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci) set_timer_slack(&xhci->comp_mode_recovery_timer, msecs_to_jiffies(COMP_MODE_RCVRY_MSECS)); add_timer(&xhci->comp_mode_recovery_timer); - xhci_dbg(xhci, "Compliance Mode Recovery Timer Initialized.\n"); + xhci_dbg(xhci, "Compliance mode recovery timer initialized\n"); } /* @@ -733,8 +733,11 @@ void xhci_stop(struct usb_hcd *hcd) /* Deleting Compliance Mode Recovery Timer */ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && - (!(xhci_all_ports_seen_u0(xhci)))) + (!(xhci_all_ports_seen_u0(xhci)))) { del_timer_sync(&xhci->comp_mode_recovery_timer); + xhci_dbg(xhci, "%s: compliance mode recovery timer deleted\n", + __func__); + } if (xhci->quirks & XHCI_AMD_PLL_FIX) usb_amd_dev_put(); @@ -930,7 +933,8 @@ int xhci_suspend(struct xhci_hcd *xhci) if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && (!(xhci_all_ports_seen_u0(xhci)))) { del_timer_sync(&xhci->comp_mode_recovery_timer); - xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted!\n"); + xhci_dbg(xhci, "%s: compliance mode recovery timer deleted\n", + __func__); } /* step 5: remove core well power */ @@ -3801,7 +3805,7 @@ int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1) return raw_port; } -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME /* BESL to HIRD Encoding array for USB2 LPM */ static int xhci_besl_encoding[16] = {125, 150, 200, 300, 400, 500, 1000, 2000, @@ -4051,7 +4055,7 @@ int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) return 0; } -#endif /* CONFIG_USB_SUSPEND */ +#endif /* CONFIG_PM_RUNTIME */ /*---------------------- USB 3.0 Link PM functions ------------------------*/ diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 63582719e0fb..29c978e37135 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1238,8 +1238,8 @@ union xhci_trb { #define TRBS_PER_SEGMENT 64 /* Allow two commands + a link TRB, along with any reserved command TRBs */ #define MAX_RSVD_CMD_TRBS (TRBS_PER_SEGMENT - 3) -#define SEGMENT_SIZE (TRBS_PER_SEGMENT*16) -#define SEGMENT_SHIFT (__ffs(SEGMENT_SIZE)) +#define TRB_SEGMENT_SIZE (TRBS_PER_SEGMENT*16) +#define TRB_SEGMENT_SHIFT (ilog2(TRB_SEGMENT_SIZE)) /* TRB buffer pointers can't cross 64KB boundaries */ #define TRB_MAX_BUFF_SHIFT 16 #define TRB_MAX_BUFF_SIZE (1 << TRB_MAX_BUFF_SHIFT) diff --git a/drivers/usb/image/Kconfig b/drivers/usb/image/Kconfig index 33350f9dd34f..320d368c8dac 100644 --- a/drivers/usb/image/Kconfig +++ b/drivers/usb/image/Kconfig @@ -2,11 +2,9 @@ # USB Imaging devices configuration # comment "USB Imaging devices" - depends on USB config USB_MDC800 tristate "USB Mustek MDC800 Digital Camera support" - depends on USB ---help--- Say Y here if you want to connect this type of still camera to your computer's USB port. This driver can be used with gphoto 0.4.3 @@ -19,7 +17,7 @@ config USB_MDC800 config USB_MICROTEK tristate "Microtek X6USB scanner support" - depends on USB && SCSI + depends on SCSI help Say Y here if you want support for the Microtek X6USB and possibly the Phantom 336CX, Phantom C6 and ScanMaker V6U(S)L. diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 3b1a3f4ec5e9..a51e7d6afda9 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -2,11 +2,9 @@ # USB Miscellaneous driver configuration # comment "USB Miscellaneous drivers" - depends on USB config USB_EMI62 tristate "EMI 6|2m USB Audio interface support" - depends on USB ---help--- This driver loads firmware to Emagic EMI 6|2m low latency USB Audio and Midi interface. @@ -21,7 +19,6 @@ config USB_EMI62 config USB_EMI26 tristate "EMI 2|6 USB Audio interface support" - depends on USB ---help--- This driver loads firmware to Emagic EMI 2|6 low latency USB Audio interface. @@ -34,7 +31,6 @@ config USB_EMI26 config USB_ADUTUX tristate "ADU devices from Ontrak Control Systems" - depends on USB help Say Y if you want to use an ADU device from Ontrak Control Systems. @@ -44,7 +40,6 @@ config USB_ADUTUX config USB_SEVSEG tristate "USB 7-Segment LED Display" - depends on USB help Say Y here if you have a USB 7-Segment Display by Delcom @@ -53,7 +48,6 @@ config USB_SEVSEG config USB_RIO500 tristate "USB Diamond Rio500 support" - depends on USB help Say Y here if you want to connect a USB Rio500 mp3 player to your computer's USB port. Please read <file:Documentation/usb/rio.txt> @@ -64,7 +58,6 @@ config USB_RIO500 config USB_LEGOTOWER tristate "USB Lego Infrared Tower support" - depends on USB help Say Y here if you want to connect a USB Lego Infrared Tower to your computer's USB port. @@ -77,7 +70,6 @@ config USB_LEGOTOWER config USB_LCD tristate "USB LCD driver support" - depends on USB help Say Y here if you want to connect an USBLCD to your computer's USB port. The USBLCD is a small USB interface board for @@ -89,7 +81,6 @@ config USB_LCD config USB_LED tristate "USB LED driver support" - depends on USB help Say Y here if you want to connect an USBLED device to your computer's USB port. @@ -99,7 +90,6 @@ config USB_LED config USB_CYPRESS_CY7C63 tristate "Cypress CY7C63xxx USB driver support" - depends on USB help Say Y here if you want to connect a Cypress CY7C63xxx micro controller to your computer's USB port. Currently this @@ -113,7 +103,6 @@ config USB_CYPRESS_CY7C63 config USB_CYTHERM tristate "Cypress USB thermometer driver support" - depends on USB help Say Y here if you want to connect a Cypress USB thermometer device to your computer's USB port. This device is also known @@ -126,7 +115,6 @@ config USB_CYTHERM config USB_IDMOUSE tristate "Siemens ID USB Mouse Fingerprint sensor support" - depends on USB help Say Y here if you want to use the fingerprint sensor on the Siemens ID Mouse. There is also a Siemens ID Mouse @@ -140,7 +128,6 @@ config USB_IDMOUSE config USB_FTDI_ELAN tristate "Elan PCMCIA CardBus Adapter USB Client" - depends on USB default M help ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters. @@ -164,7 +151,6 @@ config USB_FTDI_ELAN config USB_APPLEDISPLAY tristate "Apple Cinema Display support" - depends on USB select BACKLIGHT_LCD_SUPPORT select BACKLIGHT_CLASS_DEVICE help @@ -175,7 +161,6 @@ source "drivers/usb/misc/sisusbvga/Kconfig" config USB_LD tristate "USB LD driver" - depends on USB help This driver is for generic USB devices that use interrupt transfers, like LD Didactic's USB devices. @@ -185,7 +170,6 @@ config USB_LD config USB_TRANCEVIBRATOR tristate "PlayStation 2 Trance Vibrator driver support" - depends on USB help Say Y here if you want to connect a PlayStation 2 Trance Vibrator device to your computer's USB port. @@ -195,7 +179,6 @@ config USB_TRANCEVIBRATOR config USB_IOWARRIOR tristate "IO Warrior driver support" - depends on USB help Say Y here if you want to support the IO Warrior devices from Code Mercenaries. This includes support for the following devices: @@ -209,7 +192,6 @@ config USB_IOWARRIOR config USB_TEST tristate "USB testing driver" - depends on USB help This driver is for testing host controller software. It is used with specialized device firmware for regression and stress testing, @@ -220,7 +202,6 @@ config USB_TEST config USB_ISIGHTFW tristate "iSight firmware loading support" - depends on USB select FW_LOADER help This driver loads firmware for USB Apple iSight cameras, allowing @@ -233,7 +214,6 @@ config USB_ISIGHTFW config USB_YUREX tristate "USB YUREX driver support" - depends on USB help Say Y here if you want to connect a YUREX to your computer's USB port. The YUREX is a leg-shakes sensor. See @@ -246,7 +226,6 @@ config USB_YUREX config USB_EZUSB_FX2 tristate "Functions for loading firmware on EZUSB chips" - depends on USB help Say Y here if you need EZUSB device support. (Cypress FX/FX2/FX2LP microcontrollers) diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index 0fc6e5fc745f..ba6a5d6e618e 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -63,6 +63,7 @@ static const struct usb_device_id appledisplay_table[] = { { APPLEDISPLAY_DEVICE(0x9219) }, { APPLEDISPLAY_DEVICE(0x921c) }, { APPLEDISPLAY_DEVICE(0x921d) }, + { APPLEDISPLAY_DEVICE(0x9236) }, /* Terminating entry */ { } diff --git a/drivers/usb/misc/sisusbvga/Kconfig b/drivers/usb/misc/sisusbvga/Kconfig index 30ea7ca6846e..0d03a5200482 100644 --- a/drivers/usb/misc/sisusbvga/Kconfig +++ b/drivers/usb/misc/sisusbvga/Kconfig @@ -1,7 +1,7 @@ config USB_SISUSBVGA tristate "USB 2.0 SVGA dongle support (Net2280/SiS315)" - depends on USB && (USB_MUSB_HDRC || USB_EHCI_HCD) + depends on (USB_MUSB_HDRC || USB_EHCI_HCD) ---help--- Say Y here if you intend to attach a USB2VGA dongle based on a Net2280 and a SiS315 chip. diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index dd573abd2d1e..c21386ec5d35 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3084,7 +3084,7 @@ static int sisusb_probe(struct usb_interface *intf, /* Allocate memory for our private */ if (!(sisusb = kzalloc(sizeof(*sisusb), GFP_KERNEL))) { - dev_err(&sisusb->sisusb_dev->dev, "Failed to allocate memory for private data\n"); + dev_err(&dev->dev, "Failed to allocate memory for private data\n"); return -ENOMEM; } kref_init(&sisusb->kref); diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c index f713f6aeb6e5..d3a1cce1bf9c 100644 --- a/drivers/usb/misc/usb3503.c +++ b/drivers/usb/misc/usb3503.c @@ -307,18 +307,7 @@ static struct i2c_driver usb3503_driver = { .id_table = usb3503_id, }; -static int __init usb3503_init(void) -{ - return i2c_add_driver(&usb3503_driver); -} - -static void __exit usb3503_exit(void) -{ - i2c_del_driver(&usb3503_driver); -} - -module_init(usb3503_init); -module_exit(usb3503_exit); +module_i2c_driver(usb3503_driver); MODULE_AUTHOR("Dongjin Kim <tobetter@gmail.com>"); MODULE_DESCRIPTION("USB3503 USB HUB driver"); diff --git a/drivers/usb/mon/Kconfig b/drivers/usb/mon/Kconfig index 635745f57fbd..5c6ffa2a612e 100644 --- a/drivers/usb/mon/Kconfig +++ b/drivers/usb/mon/Kconfig @@ -4,7 +4,6 @@ config USB_MON tristate "USB Monitor" - depends on USB help If you select this option, a component which captures the USB traffic between peripheral-specific drivers and HC drivers will be built. diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 05e51432dd2f..06f8d29af1ef 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -6,8 +6,7 @@ # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller config USB_MUSB_HDRC tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' - depends on USB && USB_GADGET - select USB_OTG_UTILS + depends on USB_GADGET help Say Y here if your system has a dual role high speed USB controller based on the Mentor Graphics silicon IP. Then @@ -34,10 +33,12 @@ choice config USB_MUSB_DAVINCI tristate "DaVinci" depends on ARCH_DAVINCI_DMx + depends on BROKEN config USB_MUSB_DA8XX tristate "DA8xx/OMAP-L1x" depends on ARCH_DAVINCI_DA8XX + depends on BROKEN config USB_MUSB_TUSB6010 tristate "TUSB6010" @@ -53,7 +54,6 @@ config USB_MUSB_AM35X config USB_MUSB_DSPS tristate "TI DSPS platforms" - depends on SOC_TI81XX || SOC_AM33XX config USB_MUSB_BLACKFIN tristate "Blackfin" @@ -61,12 +61,12 @@ config USB_MUSB_BLACKFIN config USB_MUSB_UX500 tristate "U8500 and U5500" - depends on (ARCH_U8500 && AB8500_USB) endchoice choice prompt 'MUSB DMA mode' + default MUSB_PIO_ONLY if ARCH_MULTIPLATFORM default USB_UX500_DMA if USB_MUSB_UX500 default USB_INVENTRA_DMA if USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN default USB_TI_CPPI_DMA if USB_MUSB_DAVINCI diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c index 59eea219034a..2231850c0625 100644 --- a/drivers/usb/musb/am35x.c +++ b/drivers/usb/musb/am35x.c @@ -149,7 +149,7 @@ static void otg_timer(unsigned long _musb) */ devctl = musb_readb(mregs, MUSB_DEVCTL); dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl, - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); spin_lock_irqsave(&musb->lock, flags); switch (musb->xceiv->state) { @@ -195,7 +195,7 @@ static void am35x_musb_try_idle(struct musb *musb, unsigned long timeout) if (musb->is_active || (musb->a_wait_bcon == 0 && musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) { dev_dbg(musb->controller, "%s active, deleting timer\n", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); del_timer(&otg_workaround); last_timer = jiffies; return; @@ -208,7 +208,7 @@ static void am35x_musb_try_idle(struct musb *musb, unsigned long timeout) last_timer = timeout; dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n", - otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->state), jiffies_to_msecs(timeout - jiffies)); mod_timer(&otg_workaround, timeout); } @@ -298,7 +298,7 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci) /* NOTE: this must complete power-on within 100 ms. */ dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n", drvvbus ? "on" : "off", - otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->state), err ? " ERROR" : "", devctl); ret = IRQ_HANDLED; diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index dbb31b30c7fa..5e63b160db0c 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -280,13 +280,13 @@ static void musb_conn_timer_handler(unsigned long _musb) break; default: dev_dbg(musb->controller, "%s state not handled\n", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); break; } spin_unlock_irqrestore(&musb->lock, flags); dev_dbg(musb->controller, "state is %s\n", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); } static void bfin_musb_enable(struct musb *musb) @@ -307,7 +307,7 @@ static void bfin_musb_set_vbus(struct musb *musb, int is_on) dev_dbg(musb->controller, "VBUS %s, devctl %02x " /* otg %3x conf %08x prcm %08x */ "\n", - otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->state), musb_readb(musb->mregs, MUSB_DEVCTL)); } diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index f522000e8f06..9db211ee15b5 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -435,7 +435,6 @@ cppi_rndis_update(struct cppi_channel *c, int is_rx, } } -#ifdef CONFIG_USB_MUSB_DEBUG static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd) { pr_debug("RXBD/%s %08x: " @@ -444,21 +443,16 @@ static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd) bd->hw_next, bd->hw_bufp, bd->hw_off_len, bd->hw_options); } -#endif static void cppi_dump_rxq(int level, const char *tag, struct cppi_channel *rx) { -#ifdef CONFIG_USB_MUSB_DEBUG struct cppi_descriptor *bd; - if (!_dbg_level(level)) - return; cppi_dump_rx(level, rx, tag); if (rx->last_processed) cppi_dump_rxbd("last", rx->last_processed); for (bd = rx->head; bd; bd = bd->next) cppi_dump_rxbd("active", bd); -#endif } @@ -784,6 +778,7 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket) void __iomem *tibase = musb->ctrl_base; int is_rndis = 0; struct cppi_rx_stateram __iomem *rx_ram = rx->state_ram; + struct cppi_descriptor *d; if (onepacket) { /* almost every USB driver, host or peripheral side */ @@ -897,14 +892,8 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket) bd->hw_options |= CPPI_SOP_SET; tail->hw_options |= CPPI_EOP_SET; -#ifdef CONFIG_USB_MUSB_DEBUG - if (_dbg_level(5)) { - struct cppi_descriptor *d; - - for (d = rx->head; d; d = d->next) - cppi_dump_rxbd("S", d); - } -#endif + for (d = rx->head; d; d = d->next) + cppi_dump_rxbd("S", d); /* in case the preceding transfer left some state... */ tail = rx->last_processed; diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index 41613a2b35e8..b903b744a224 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -198,7 +198,7 @@ static void otg_timer(unsigned long _musb) */ devctl = musb_readb(mregs, MUSB_DEVCTL); dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl, - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); spin_lock_irqsave(&musb->lock, flags); switch (musb->xceiv->state) { @@ -267,7 +267,7 @@ static void da8xx_musb_try_idle(struct musb *musb, unsigned long timeout) if (musb->is_active || (musb->a_wait_bcon == 0 && musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) { dev_dbg(musb->controller, "%s active, deleting timer\n", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); del_timer(&otg_workaround); last_timer = jiffies; return; @@ -280,7 +280,7 @@ static void da8xx_musb_try_idle(struct musb *musb, unsigned long timeout) last_timer = timeout; dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n", - otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->state), jiffies_to_msecs(timeout - jiffies)); mod_timer(&otg_workaround, timeout); } @@ -360,7 +360,7 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci) dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n", drvvbus ? "on" : "off", - otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->state), err ? " ERROR" : "", devctl); ret = IRQ_HANDLED; diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index e040d9103735..bea6cc35471c 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -215,7 +215,7 @@ static void otg_timer(unsigned long _musb) */ devctl = musb_readb(mregs, MUSB_DEVCTL); dev_dbg(musb->controller, "poll devctl %02x (%s)\n", devctl, - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); spin_lock_irqsave(&musb->lock, flags); switch (musb->xceiv->state) { @@ -349,7 +349,7 @@ static irqreturn_t davinci_musb_interrupt(int irq, void *__hci) davinci_musb_source_power(musb, drvvbus, 0); dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n", drvvbus ? "on" : "off", - otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->state), err ? " ERROR" : "", devctl); retval = IRQ_HANDLED; diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index daec6e0f7e38..37a261a6bb6a 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -372,13 +372,13 @@ static void musb_otg_timer_func(unsigned long data) case OTG_STATE_A_SUSPEND: case OTG_STATE_A_WAIT_BCON: dev_dbg(musb->controller, "HNP: %s timeout\n", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); musb_platform_set_vbus(musb, 0); musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; break; default: dev_dbg(musb->controller, "HNP: Unhandled mode %s\n", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); } musb->ignore_disconnect = 0; spin_unlock_irqrestore(&musb->lock, flags); @@ -393,13 +393,14 @@ void musb_hnp_stop(struct musb *musb) void __iomem *mbase = musb->mregs; u8 reg; - dev_dbg(musb->controller, "HNP: stop from %s\n", otg_state_string(musb->xceiv->state)); + dev_dbg(musb->controller, "HNP: stop from %s\n", + usb_otg_state_string(musb->xceiv->state)); switch (musb->xceiv->state) { case OTG_STATE_A_PERIPHERAL: musb_g_disconnect(musb); dev_dbg(musb->controller, "HNP: back to %s\n", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); break; case OTG_STATE_B_HOST: dev_dbg(musb->controller, "HNP: Disabling HR\n"); @@ -413,7 +414,7 @@ void musb_hnp_stop(struct musb *musb) break; default: dev_dbg(musb->controller, "HNP: Stopping in unknown state %s\n", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); } /* @@ -451,7 +452,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, */ if (int_usb & MUSB_INTR_RESUME) { handled = IRQ_HANDLED; - dev_dbg(musb->controller, "RESUME (%s)\n", otg_state_string(musb->xceiv->state)); + dev_dbg(musb->controller, "RESUME (%s)\n", usb_otg_state_string(musb->xceiv->state)); if (devctl & MUSB_DEVCTL_HM) { void __iomem *mbase = musb->mregs; @@ -493,7 +494,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, default: WARNING("bogus %s RESUME (%s)\n", "host", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); } } else { switch (musb->xceiv->state) { @@ -522,7 +523,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, default: WARNING("bogus %s RESUME (%s)\n", "peripheral", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); } } } @@ -538,7 +539,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, } dev_dbg(musb->controller, "SESSION_REQUEST (%s)\n", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); /* IRQ arrives from ID pin sense or (later, if VBUS power * is removed) SRP. responses are time critical: @@ -602,8 +603,9 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, break; } - dev_dbg(musb->controller, "VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n", - otg_state_string(musb->xceiv->state), + dev_printk(ignore ? KERN_DEBUG : KERN_ERR, musb->controller, + "VBUS_ERROR in %s (%02x, %s), retry #%d, port1 %08x\n", + usb_otg_state_string(musb->xceiv->state), devctl, ({ char *s; switch (devctl & MUSB_DEVCTL_VBUS) { @@ -628,7 +630,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, if (int_usb & MUSB_INTR_SUSPEND) { dev_dbg(musb->controller, "SUSPEND (%s) devctl %02x\n", - otg_state_string(musb->xceiv->state), devctl); + usb_otg_state_string(musb->xceiv->state), devctl); handled = IRQ_HANDLED; switch (musb->xceiv->state) { @@ -745,12 +747,12 @@ b_host: usb_hcd_resume_root_hub(hcd); dev_dbg(musb->controller, "CONNECT (%s) devctl %02x\n", - otg_state_string(musb->xceiv->state), devctl); + usb_otg_state_string(musb->xceiv->state), devctl); } if ((int_usb & MUSB_INTR_DISCONNECT) && !musb->ignore_disconnect) { dev_dbg(musb->controller, "DISCONNECT (%s) as %s, devctl %02x\n", - otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->state), MUSB_MODE(musb), devctl); handled = IRQ_HANDLED; @@ -787,7 +789,7 @@ b_host: break; default: WARNING("unhandled DISCONNECT transition (%s)\n", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); break; } } @@ -813,7 +815,7 @@ b_host: } } else { dev_dbg(musb->controller, "BUS RESET as %s\n", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); switch (musb->xceiv->state) { case OTG_STATE_A_SUSPEND: /* We need to ignore disconnect on suspend @@ -826,7 +828,7 @@ b_host: case OTG_STATE_A_WAIT_BCON: /* OPT TD.4.7-900ms */ /* never use invalid T(a_wait_bcon) */ dev_dbg(musb->controller, "HNP: in %s, %d msec timeout\n", - otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->state), TA_WAIT_BCON(musb)); mod_timer(&musb->otg_timer, jiffies + msecs_to_jiffies(TA_WAIT_BCON(musb))); @@ -838,7 +840,7 @@ b_host: break; case OTG_STATE_B_WAIT_ACON: dev_dbg(musb->controller, "HNP: RESET (%s), to b_peripheral\n", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); musb->xceiv->state = OTG_STATE_B_PERIPHERAL; musb_g_reset(musb); break; @@ -850,7 +852,7 @@ b_host: break; default: dev_dbg(musb->controller, "Unhandled BUS RESET as %s\n", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); } } } @@ -1632,7 +1634,7 @@ musb_mode_show(struct device *dev, struct device_attribute *attr, char *buf) int ret = -EINVAL; spin_lock_irqsave(&musb->lock, flags); - ret = sprintf(buf, "%s\n", otg_state_string(musb->xceiv->state)); + ret = sprintf(buf, "%s\n", usb_otg_state_string(musb->xceiv->state)); spin_unlock_irqrestore(&musb->lock, flags); return ret; @@ -1951,9 +1953,13 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb_write_ulpi_buscontrol(musb->mregs, busctl); } - MUSB_DEV_MODE(musb); - musb->xceiv->otg->default_a = 0; - musb->xceiv->state = OTG_STATE_B_IDLE; + if (musb->xceiv->otg->default_a) { + MUSB_HST_MODE(musb); + musb->xceiv->state = OTG_STATE_A_IDLE; + } else { + MUSB_DEV_MODE(musb); + musb->xceiv->state = OTG_STATE_B_IDLE; + } status = musb_gadget_setup(musb); @@ -2008,7 +2014,6 @@ static int musb_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; int irq = platform_get_irq_byname(pdev, "mc"); - int status; struct resource *iomem; void __iomem *base; @@ -2016,24 +2021,17 @@ static int musb_probe(struct platform_device *pdev) if (!iomem || irq <= 0) return -ENODEV; - base = ioremap(iomem->start, resource_size(iomem)); - if (!base) { - dev_err(dev, "ioremap failed\n"); - return -ENOMEM; - } + base = devm_ioremap_resource(dev, iomem); + if (IS_ERR(base)) + return PTR_ERR(base); - status = musb_init_controller(dev, irq, base); - if (status < 0) - iounmap(base); - - return status; + return musb_init_controller(dev, irq, base); } static int musb_remove(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct musb *musb = dev_to_musb(dev); - void __iomem *ctrl_base = musb->ctrl_base; /* this gets called on rmmod. * - Host mode: host may still be active @@ -2044,7 +2042,6 @@ static int musb_remove(struct platform_device *pdev) musb_shutdown(pdev); musb_free(musb); - iounmap(ctrl_base); device_init_wakeup(dev, 0); #ifndef CONFIG_MUSB_PIO_ONLY dma_set_mask(dev, *dev->parent->dma_mask); @@ -2293,8 +2290,6 @@ static int __init musb_init(void) if (usb_disabled()) return 0; - pr_info("%s: version " MUSB_VERSION ", ?dma?, otg (peripheral+host)\n", - musb_driver_name); return platform_driver_register(&musb_driver); } module_init(musb_init); diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 6bb89715b637..3a18e44e9391 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -38,6 +38,7 @@ #include <linux/module.h> #include <linux/usb/nop-usb-xceiv.h> #include <linux/platform_data/usb-omap.h> +#include <linux/sizes.h> #include <linux/of.h> #include <linux/of_device.h> @@ -224,7 +225,7 @@ static void otg_timer(unsigned long _musb) */ devctl = dsps_readb(mregs, MUSB_DEVCTL); dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl, - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); spin_lock_irqsave(&musb->lock, flags); switch (musb->xceiv->state) { @@ -273,7 +274,7 @@ static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout) if (musb->is_active || (musb->a_wait_bcon == 0 && musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) { dev_dbg(musb->controller, "%s active, deleting timer\n", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); del_timer(&glue->timer[pdev->id]); glue->last_timer[pdev->id] = jiffies; return; @@ -288,7 +289,7 @@ static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout) glue->last_timer[pdev->id] = timeout; dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n", - otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->state), jiffies_to_msecs(timeout - jiffies)); mod_timer(&glue->timer[pdev->id], timeout); } @@ -334,7 +335,7 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) * value but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set. * Also, DRVVBUS pulses for SRP (but not at 5V) ... */ - if (usbintr & MUSB_INTR_BABBLE) + if (is_host_active(musb) && usbintr & MUSB_INTR_BABBLE) pr_info("CAUTION: musb: Babble Interrupt Occurred\n"); if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) { @@ -377,7 +378,7 @@ static irqreturn_t dsps_interrupt(int irq, void *hci) /* NOTE: this must complete power-on within 100 ms. */ dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n", drvvbus ? "on" : "off", - otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->state), err ? " ERROR" : "", devctl); ret = IRQ_HANDLED; @@ -596,14 +597,13 @@ err0: static int dsps_probe(struct platform_device *pdev) { - struct device_node *np = pdev->dev.of_node; const struct of_device_id *match; const struct dsps_musb_wrapper *wrp; struct dsps_glue *glue; struct resource *iomem; int ret, i; - match = of_match_node(musb_dsps_of_match, np); + match = of_match_node(musb_dsps_of_match, pdev->dev.of_node); if (!match) { dev_err(&pdev->dev, "fail to get matching of_match struct\n"); ret = -EINVAL; diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 83eddedcd9be..ba7092349fa9 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -46,48 +46,6 @@ #include "musb_core.h" -/* MUSB PERIPHERAL status 3-mar-2006: - * - * - EP0 seems solid. It passes both USBCV and usbtest control cases. - * Minor glitches: - * - * + remote wakeup to Linux hosts work, but saw USBCV failures; - * in one test run (operator error?) - * + endpoint halt tests -- in both usbtest and usbcv -- seem - * to break when dma is enabled ... is something wrongly - * clearing SENDSTALL? - * - * - Mass storage behaved ok when last tested. Network traffic patterns - * (with lots of short transfers etc) need retesting; they turn up the - * worst cases of the DMA, since short packets are typical but are not - * required. - * - * - TX/IN - * + both pio and dma behave in with network and g_zero tests - * + no cppi throughput issues other than no-hw-queueing - * + failed with FLAT_REG (DaVinci) - * + seems to behave with double buffering, PIO -and- CPPI - * + with gadgetfs + AIO, requests got lost? - * - * - RX/OUT - * + both pio and dma behave in with network and g_zero tests - * + dma is slow in typical case (short_not_ok is clear) - * + double buffering ok with PIO - * + double buffering *FAILS* with CPPI, wrong data bytes sometimes - * + request lossage observed with gadgetfs - * - * - ISO not tested ... might work, but only weakly isochronous - * - * - Gadget driver disabling of softconnect during bind() is ignored; so - * drivers can't hold off host requests until userspace is ready. - * (Workaround: they can turn it off later.) - * - * - PORTABILITY (assumes PIO works): - * + DaVinci, basically works with cppi dma - * + OMAP 2430, ditto with mentor dma - * + TUSB 6010, platform-specific dma in the works - */ - /* ----------------------------------------------------------------------- */ #define is_buffer_mapped(req) (is_dma_capable() && \ @@ -280,41 +238,6 @@ static inline int max_ep_writesize(struct musb *musb, struct musb_ep *ep) return ep->packet_sz; } - -#ifdef CONFIG_USB_INVENTRA_DMA - -/* Peripheral tx (IN) using Mentor DMA works as follows: - Only mode 0 is used for transfers <= wPktSize, - mode 1 is used for larger transfers, - - One of the following happens: - - Host sends IN token which causes an endpoint interrupt - -> TxAvail - -> if DMA is currently busy, exit. - -> if queue is non-empty, txstate(). - - - Request is queued by the gadget driver. - -> if queue was previously empty, txstate() - - txstate() - -> start - /\ -> setup DMA - | (data is transferred to the FIFO, then sent out when - | IN token(s) are recd from Host. - | -> DMA interrupt on completion - | calls TxAvail. - | -> stop DMA, ~DMAENAB, - | -> set TxPktRdy for last short pkt or zlp - | -> Complete Request - | -> Continue next request (call txstate) - |___________________________________| - - * Non-Mentor DMA engines can of course work differently, such as by - * upleveling from irq-per-packet to irq-per-buffer. - */ - -#endif - /* * An endpoint is transmitting data. This can be called either from * the IRQ routine or from ep.queue() to kickstart a request on an @@ -621,37 +544,6 @@ void musb_g_tx(struct musb *musb, u8 epnum) /* ------------------------------------------------------------ */ -#ifdef CONFIG_USB_INVENTRA_DMA - -/* Peripheral rx (OUT) using Mentor DMA works as follows: - - Only mode 0 is used. - - - Request is queued by the gadget class driver. - -> if queue was previously empty, rxstate() - - - Host sends OUT token which causes an endpoint interrupt - /\ -> RxReady - | -> if request queued, call rxstate - | /\ -> setup DMA - | | -> DMA interrupt on completion - | | -> RxReady - | | -> stop DMA - | | -> ack the read - | | -> if data recd = max expected - | | by the request, or host - | | sent a short packet, - | | complete the request, - | | and start the next one. - | |_____________________________________| - | else just wait for the host - | to send the next OUT token. - |__________________________________________________| - - * Non-Mentor DMA engines can of course work differently. - */ - -#endif - /* * Context: controller locked, IRQs blocked, endpoint selected */ @@ -740,7 +632,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) struct dma_controller *c; struct dma_channel *channel; int use_dma = 0; - int transfer_size; + unsigned int transfer_size; c = musb->dma_controller; channel = musb_ep->dma; @@ -782,10 +674,11 @@ static void rxstate(struct musb *musb, struct musb_request *req) csr | MUSB_RXCSR_DMAMODE); musb_writew(epio, MUSB_RXCSR, csr); - transfer_size = min(request->length - request->actual, + transfer_size = min_t(unsigned int, + request->length - + request->actual, channel->max_len); musb_ep->dma->desired_mode = 1; - } else { if (!musb_ep->hb_mult && musb_ep->hw_ep->rx_double_buffered) @@ -815,7 +708,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) struct dma_controller *c; struct dma_channel *channel; - int transfer_size = 0; + unsigned int transfer_size = 0; c = musb->dma_controller; channel = musb_ep->dma; @@ -824,11 +717,13 @@ static void rxstate(struct musb *musb, struct musb_request *req) if (fifo_count < musb_ep->packet_sz) transfer_size = fifo_count; else if (request->short_not_ok) - transfer_size = min(request->length - + transfer_size = min_t(unsigned int, + request->length - request->actual, channel->max_len); else - transfer_size = min(request->length - + transfer_size = min_t(unsigned int, + request->length - request->actual, (unsigned)fifo_count); @@ -1681,7 +1576,7 @@ static int musb_gadget_wakeup(struct usb_gadget *gadget) goto done; default: dev_dbg(musb->controller, "Unhandled wake: %s\n", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); goto done; } @@ -1801,13 +1696,6 @@ static const struct usb_gadget_ops musb_gadget_operations = { * all peripheral ports are external... */ -static void musb_gadget_release(struct device *dev) -{ - /* kref_put(WHAT) */ - dev_dbg(dev, "%s\n", __func__); -} - - static void init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in) { @@ -1892,12 +1780,7 @@ int musb_gadget_setup(struct musb *musb) musb->g.speed = USB_SPEED_UNKNOWN; /* this "gadget" abstracts/virtualizes the controller */ - dev_set_name(&musb->g.dev, "gadget"); - musb->g.dev.parent = musb->controller; - musb->g.dev.dma_mask = musb->controller->dma_mask; - musb->g.dev.release = musb_gadget_release; musb->g.name = musb_driver_name; - musb->g.is_otg = 1; musb_g_init_endpoints(musb); @@ -1905,11 +1788,6 @@ int musb_gadget_setup(struct musb *musb) musb->is_active = 0; musb_platform_try_idle(musb, 0); - status = device_register(&musb->g.dev); - if (status != 0) { - put_device(&musb->g.dev); - return status; - } status = usb_add_gadget_udc(musb->controller, &musb->g); if (status) goto err; @@ -1924,8 +1802,6 @@ err: void musb_gadget_cleanup(struct musb *musb) { usb_del_gadget_udc(&musb->g); - if (musb->g.dev.parent) - device_unregister(&musb->g.dev); } /* @@ -1977,9 +1853,8 @@ static int musb_gadget_start(struct usb_gadget *g, goto err; } - if ((musb->xceiv->last_event == USB_EVENT_ID) - && otg->set_vbus) - otg_set_vbus(otg, 1); + if (musb->xceiv->last_event == USB_EVENT_ID) + musb_platform_set_vbus(musb, 1); hcd->self.uses_pio_for_control = 1; @@ -2063,6 +1938,7 @@ static int musb_gadget_stop(struct usb_gadget *g, dev_dbg(musb->controller, "unregistering driver %s\n", driver->function); musb->is_active = 0; + musb->gadget_driver = NULL; musb_platform_try_idle(musb, 0); spin_unlock_irqrestore(&musb->lock, flags); @@ -2099,7 +1975,7 @@ void musb_g_resume(struct musb *musb) break; default: WARNING("unhandled RESUME transition (%s)\n", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); } } @@ -2129,7 +2005,7 @@ void musb_g_suspend(struct musb *musb) * A_PERIPHERAL may need care too */ WARNING("unhandled SUSPEND transition (%s)\n", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); } } @@ -2163,7 +2039,7 @@ void musb_g_disconnect(struct musb *musb) switch (musb->xceiv->state) { default: dev_dbg(musb->controller, "Unhandled disconnect %s, setting a_idle\n", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); musb->xceiv->state = OTG_STATE_A_IDLE; MUSB_HST_MODE(musb); break; diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c index c9c1ac4e075f..2af45a0c8930 100644 --- a/drivers/usb/musb/musb_gadget_ep0.c +++ b/drivers/usb/musb/musb_gadget_ep0.c @@ -505,8 +505,10 @@ static void ep0_rxstate(struct musb *musb) req->status = -EOVERFLOW; count = len; } - musb_read_fifo(&musb->endpoints[0], count, buf); - req->actual += count; + if (count > 0) { + musb_read_fifo(&musb->endpoints[0], count, buf); + req->actual += count; + } csr = MUSB_CSR0_P_SVDRXPKTRDY; if (count < 64 || req->actual == req->length) { musb->ep0_state = MUSB_EP0_STAGE_STATUSIN; diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 1ce1fcf3f3e7..8914dec49f01 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -2453,7 +2453,7 @@ static int musb_bus_suspend(struct usb_hcd *hcd) if (musb->is_active) { WARNING("trying to suspend as %s while active\n", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); return -EBUSY; } else return 0; @@ -2465,6 +2465,118 @@ static int musb_bus_resume(struct usb_hcd *hcd) return 0; } + +#ifndef CONFIG_MUSB_PIO_ONLY + +#define MUSB_USB_DMA_ALIGN 4 + +struct musb_temp_buffer { + void *kmalloc_ptr; + void *old_xfer_buffer; + u8 data[0]; +}; + +static void musb_free_temp_buffer(struct urb *urb) +{ + enum dma_data_direction dir; + struct musb_temp_buffer *temp; + + if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER)) + return; + + dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + + temp = container_of(urb->transfer_buffer, struct musb_temp_buffer, + data); + + if (dir == DMA_FROM_DEVICE) { + memcpy(temp->old_xfer_buffer, temp->data, + urb->transfer_buffer_length); + } + urb->transfer_buffer = temp->old_xfer_buffer; + kfree(temp->kmalloc_ptr); + + urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER; +} + +static int musb_alloc_temp_buffer(struct urb *urb, gfp_t mem_flags) +{ + enum dma_data_direction dir; + struct musb_temp_buffer *temp; + void *kmalloc_ptr; + size_t kmalloc_size; + + if (urb->num_sgs || urb->sg || + urb->transfer_buffer_length == 0 || + !((uintptr_t)urb->transfer_buffer & (MUSB_USB_DMA_ALIGN - 1))) + return 0; + + dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + + /* Allocate a buffer with enough padding for alignment */ + kmalloc_size = urb->transfer_buffer_length + + sizeof(struct musb_temp_buffer) + MUSB_USB_DMA_ALIGN - 1; + + kmalloc_ptr = kmalloc(kmalloc_size, mem_flags); + if (!kmalloc_ptr) + return -ENOMEM; + + /* Position our struct temp_buffer such that data is aligned */ + temp = PTR_ALIGN(kmalloc_ptr, MUSB_USB_DMA_ALIGN); + + + temp->kmalloc_ptr = kmalloc_ptr; + temp->old_xfer_buffer = urb->transfer_buffer; + if (dir == DMA_TO_DEVICE) + memcpy(temp->data, urb->transfer_buffer, + urb->transfer_buffer_length); + urb->transfer_buffer = temp->data; + + urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER; + + return 0; +} + +static int musb_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, + gfp_t mem_flags) +{ + struct musb *musb = hcd_to_musb(hcd); + int ret; + + /* + * The DMA engine in RTL1.8 and above cannot handle + * DMA addresses that are not aligned to a 4 byte boundary. + * For such engine implemented (un)map_urb_for_dma hooks. + * Do not use these hooks for RTL<1.8 + */ + if (musb->hwvers < MUSB_HWVERS_1800) + return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags); + + ret = musb_alloc_temp_buffer(urb, mem_flags); + if (ret) + return ret; + + ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags); + if (ret) + musb_free_temp_buffer(urb); + + return ret; +} + +static void musb_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) +{ + struct musb *musb = hcd_to_musb(hcd); + + usb_hcd_unmap_urb_for_dma(hcd, urb); + + /* Do not use this hook for RTL<1.8 (see description above) */ + if (musb->hwvers < MUSB_HWVERS_1800) + return; + + musb_free_temp_buffer(urb); +} +#endif /* !CONFIG_MUSB_PIO_ONLY */ + const struct hc_driver musb_hc_driver = { .description = "musb-hcd", .product_desc = "MUSB HDRC host driver", @@ -2484,6 +2596,11 @@ const struct hc_driver musb_hc_driver = { .urb_dequeue = musb_urb_dequeue, .endpoint_disable = musb_h_disable, +#ifndef CONFIG_MUSB_PIO_ONLY + .map_urb_for_dma = musb_map_urb_for_dma, + .unmap_urb_for_dma = musb_unmap_urb_for_dma, +#endif + .hub_status_data = musb_hub_status_data, .hub_control = musb_hub_control, .bus_suspend = musb_bus_suspend, diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index f70579154ded..ef7d11045f56 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c @@ -95,7 +95,7 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend) break; default: dev_dbg(musb->controller, "bogus rh suspend? %s\n", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); } } else if (power & MUSB_POWER_SUSPENDM) { power &= ~MUSB_POWER_SUSPENDM; @@ -203,7 +203,7 @@ void musb_root_disconnect(struct musb *musb) break; default: dev_dbg(musb->controller, "host disconnect (%s)\n", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); } } diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 1a42a458f2c4..3551f1a30c65 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -117,7 +117,7 @@ static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout) if (musb->is_active || ((musb->a_wait_bcon == 0) && (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) { dev_dbg(musb->controller, "%s active, deleting timer\n", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); del_timer(&musb_idle_timer); last_timer = jiffies; return; @@ -134,7 +134,7 @@ static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout) last_timer = timeout; dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n", - otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->state), (unsigned long)jiffies_to_msecs(timeout - jiffies)); mod_timer(&musb_idle_timer, timeout); } @@ -174,8 +174,7 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on) } } - if (otg->set_vbus) - otg_set_vbus(otg, 1); + otg_set_vbus(otg, 1); } else { musb->is_active = 1; otg->default_a = 1; @@ -200,7 +199,7 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on) dev_dbg(musb->controller, "VBUS %s, devctl %02x " /* otg %3x conf %08x prcm %08x */ "\n", - otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->state), musb_readb(musb->mregs, MUSB_DEVCTL)); } @@ -292,14 +291,14 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) musb->xceiv->last_event = USB_EVENT_NONE; if (musb->gadget_driver) { + omap2430_musb_set_vbus(musb, 0); pm_runtime_mark_last_busy(dev); pm_runtime_put_autosuspend(dev); } - if (data->interface_type == MUSB_INTERFACE_UTMI) { - if (musb->xceiv->otg->set_vbus) - otg_set_vbus(musb->xceiv->otg, 0); - } + if (data->interface_type == MUSB_INTERFACE_UTMI) + otg_set_vbus(musb->xceiv->otg, 0); + omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DISCONNECT); break; @@ -355,7 +354,12 @@ static int omap2430_musb_init(struct musb *musb) else musb->xceiv = devm_usb_get_phy_dev(dev, 0); - if (IS_ERR_OR_NULL(musb->xceiv)) { + if (IS_ERR(musb->xceiv)) { + status = PTR_ERR(musb->xceiv); + + if (status == -ENXIO) + return status; + pr_err("HS USB OTG: no transceiver configured\n"); return -EPROBE_DEFER; } @@ -393,6 +397,8 @@ static int omap2430_musb_init(struct musb *musb) if (glue->status != OMAP_MUSB_UNKNOWN) omap_musb_set_mailbox(glue); + usb_phy_init(musb->xceiv); + pm_runtime_put_noidle(musb->controller); return 0; @@ -526,10 +532,10 @@ static int omap2430_probe(struct platform_device *pdev) } of_property_read_u32(np, "mode", (u32 *)&pdata->mode); - of_property_read_u32(np, "interface_type", + of_property_read_u32(np, "interface-type", (u32 *)&data->interface_type); - of_property_read_u32(np, "num_eps", (u32 *)&config->num_eps); - of_property_read_u32(np, "ram_bits", (u32 *)&config->ram_bits); + of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps); + of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits); of_property_read_u32(np, "power", (u32 *)&pdata->power); config->multipoint = of_property_read_bool(np, "multipoint"); pdata->has_mailbox = of_property_read_bool(np, diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 464bd23cccda..7369ba33c94f 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -423,7 +423,7 @@ static void musb_do_idle(unsigned long _musb) && (musb->idle_timeout == 0 || time_after(jiffies, musb->idle_timeout))) { dev_dbg(musb->controller, "Nothing connected %s, turning off VBUS\n", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); } /* FALLTHROUGH */ case OTG_STATE_A_IDLE: @@ -478,7 +478,7 @@ static void tusb_musb_try_idle(struct musb *musb, unsigned long timeout) if (musb->is_active || ((musb->a_wait_bcon == 0) && (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) { dev_dbg(musb->controller, "%s active, deleting timer\n", - otg_state_string(musb->xceiv->state)); + usb_otg_state_string(musb->xceiv->state)); del_timer(&musb_idle_timer); last_timer = jiffies; return; @@ -495,7 +495,7 @@ static void tusb_musb_try_idle(struct musb *musb, unsigned long timeout) last_timer = timeout; dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n", - otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->state), (unsigned long)jiffies_to_msecs(timeout - jiffies)); mod_timer(&musb_idle_timer, timeout); } @@ -571,7 +571,7 @@ static void tusb_musb_set_vbus(struct musb *musb, int is_on) musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); dev_dbg(musb->controller, "VBUS %s, devctl %02x otg %3x conf %08x prcm %08x\n", - otg_state_string(musb->xceiv->state), + usb_otg_state_string(musb->xceiv->state), musb_readb(musb->mregs, MUSB_DEVCTL), musb_readl(tbase, TUSB_DEV_OTG_STAT), conf, prcm); @@ -678,13 +678,13 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase) musb->is_active = 0; } dev_dbg(musb->controller, "vbus change, %s, otg %03x\n", - otg_state_string(musb->xceiv->state), otg_stat); + usb_otg_state_string(musb->xceiv->state), otg_stat); idle_timeout = jiffies + (1 * HZ); schedule_work(&musb->irq_work); } else /* A-dev state machine */ { dev_dbg(musb->controller, "vbus change, %s, otg %03x\n", - otg_state_string(musb->xceiv->state), otg_stat); + usb_otg_state_string(musb->xceiv->state), otg_stat); switch (musb->xceiv->state) { case OTG_STATE_A_IDLE: @@ -733,7 +733,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase) u8 devctl; dev_dbg(musb->controller, "%s timer, %03x\n", - otg_state_string(musb->xceiv->state), otg_stat); + usb_otg_state_string(musb->xceiv->state), otg_stat); switch (musb->xceiv->state) { case OTG_STATE_A_WAIT_VRISE: diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c index 13a392913769..2c80004e0a83 100644 --- a/drivers/usb/musb/ux500.c +++ b/drivers/usb/musb/ux500.c @@ -26,6 +26,7 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/platform_device.h> +#include <linux/usb/musb-ux500.h> #include "musb_core.h" @@ -36,6 +37,98 @@ struct ux500_glue { }; #define glue_to_musb(g) platform_get_drvdata(g->musb) +static void ux500_musb_set_vbus(struct musb *musb, int is_on) +{ + u8 devctl; + unsigned long timeout = jiffies + msecs_to_jiffies(1000); + /* HDRC controls CPEN, but beware current surges during device + * connect. They can trigger transient overcurrent conditions + * that must be ignored. + */ + + devctl = musb_readb(musb->mregs, MUSB_DEVCTL); + + if (is_on) { + if (musb->xceiv->state == OTG_STATE_A_IDLE) { + /* start the session */ + devctl |= MUSB_DEVCTL_SESSION; + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); + /* + * Wait for the musb to set as A device to enable the + * VBUS + */ + while (musb_readb(musb->mregs, MUSB_DEVCTL) & 0x80) { + + if (time_after(jiffies, timeout)) { + dev_err(musb->controller, + "configured as A device timeout"); + break; + } + } + + } else { + musb->is_active = 1; + musb->xceiv->otg->default_a = 1; + musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; + devctl |= MUSB_DEVCTL_SESSION; + MUSB_HST_MODE(musb); + } + } else { + musb->is_active = 0; + + /* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and jumping + * right to B_IDLE... + */ + musb->xceiv->otg->default_a = 0; + devctl &= ~MUSB_DEVCTL_SESSION; + MUSB_DEV_MODE(musb); + } + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); + + /* + * Devctl values will be updated after vbus goes below + * session_valid. The time taken depends on the capacitance + * on VBUS line. The max discharge time can be upto 1 sec + * as per the spec. Typically on our platform, it is 200ms + */ + if (!is_on) + mdelay(200); + + dev_dbg(musb->controller, "VBUS %s, devctl %02x\n", + usb_otg_state_string(musb->xceiv->state), + musb_readb(musb->mregs, MUSB_DEVCTL)); +} + +static int musb_otg_notifications(struct notifier_block *nb, + unsigned long event, void *unused) +{ + struct musb *musb = container_of(nb, struct musb, nb); + + dev_dbg(musb->controller, "musb_otg_notifications %ld %s\n", + event, usb_otg_state_string(musb->xceiv->state)); + + switch (event) { + case UX500_MUSB_ID: + dev_dbg(musb->controller, "ID GND\n"); + ux500_musb_set_vbus(musb, 1); + break; + case UX500_MUSB_VBUS: + dev_dbg(musb->controller, "VBUS Connect\n"); + break; + case UX500_MUSB_NONE: + dev_dbg(musb->controller, "VBUS Disconnect\n"); + if (is_host_active(musb)) + ux500_musb_set_vbus(musb, 0); + else + musb->xceiv->state = OTG_STATE_B_IDLE; + break; + default: + dev_dbg(musb->controller, "ID float\n"); + return NOTIFY_DONE; + } + return NOTIFY_OK; +} + static irqreturn_t ux500_musb_interrupt(int irq, void *__hci) { unsigned long flags; @@ -58,12 +151,21 @@ static irqreturn_t ux500_musb_interrupt(int irq, void *__hci) static int ux500_musb_init(struct musb *musb) { + int status; + musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(musb->xceiv)) { pr_err("HS USB OTG: no transceiver configured\n"); return -EPROBE_DEFER; } + musb->nb.notifier_call = musb_otg_notifications; + status = usb_register_notifier(musb->xceiv, &musb->nb); + if (status < 0) { + dev_dbg(musb->controller, "notification register failed\n"); + return status; + } + musb->isr = ux500_musb_interrupt; return 0; @@ -71,6 +173,8 @@ static int ux500_musb_init(struct musb *musb) static int ux500_musb_exit(struct musb *musb) { + usb_unregister_notifier(musb->xceiv, &musb->nb); + usb_put_phy(musb->xceiv); return 0; @@ -79,6 +183,8 @@ static int ux500_musb_exit(struct musb *musb) static const struct musb_platform_ops ux500_ops = { .init = ux500_musb_init, .exit = ux500_musb_exit, + + .set_vbus = ux500_musb_set_vbus, }; static int ux500_probe(struct platform_device *pdev) diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c index 039e567dd3b6..338120641145 100644 --- a/drivers/usb/musb/ux500_dma.c +++ b/drivers/usb/musb/ux500_dma.c @@ -1,7 +1,7 @@ /* * drivers/usb/musb/ux500_dma.c * - * U8500 and U5500 DMA support code + * U8500 DMA support code * * Copyright (C) 2009 STMicroelectronics * Copyright (C) 2011 ST-Ericsson SA @@ -30,6 +30,7 @@ #include <linux/dma-mapping.h> #include <linux/dmaengine.h> #include <linux/pfn.h> +#include <linux/sizes.h> #include <linux/platform_data/usb-musb-ux500.h> #include "musb_core.h" @@ -56,7 +57,7 @@ struct ux500_dma_controller { }; /* Work function invoked from DMA callback to handle rx transfers. */ -void ux500_dma_callback(void *private_data) +static void ux500_dma_callback(void *private_data) { struct dma_channel *channel = private_data; struct ux500_dma_channel *ux500_channel = channel->private_data; @@ -93,8 +94,9 @@ static bool ux500_configure_channel(struct dma_channel *channel, struct musb *musb = ux500_channel->controller->private_data; dev_dbg(musb->controller, - "packet_sz=%d, mode=%d, dma_addr=0x%x, len=%d is_tx=%d\n", - packet_sz, mode, dma_addr, len, ux500_channel->is_tx); + "packet_sz=%d, mode=%d, dma_addr=0x%llu, len=%d is_tx=%d\n", + packet_sz, mode, (unsigned long long) dma_addr, + len, ux500_channel->is_tx); ux500_channel->cur_len = len; @@ -191,7 +193,7 @@ static int ux500_dma_is_compatible(struct dma_channel *channel, u16 maxpacket, void *buf, u32 length) { if ((maxpacket & 0x3) || - ((int)buf & 0x3) || + ((unsigned long int) buf & 0x3) || (length < 512) || (length & 0x3)) return false; @@ -372,12 +374,17 @@ struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *ba controller = kzalloc(sizeof(*controller), GFP_KERNEL); if (!controller) - return NULL; + goto kzalloc_fail; controller->private_data = musb; /* Save physical address for DMA controller. */ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!iomem) { + dev_err(musb->controller, "no memory resource defined\n"); + goto plat_get_fail; + } + controller->phy_base = (dma_addr_t) iomem->start; controller->controller.start = ux500_dma_controller_start; @@ -389,4 +396,9 @@ struct dma_controller *dma_controller_create(struct musb *musb, void __iomem *ba controller->controller.is_compatible = ux500_dma_is_compatible; return &controller->controller; + +plat_get_fail: + kfree(controller); +kzalloc_fail: + return NULL; } diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig deleted file mode 100644 index 37962c99ff1e..000000000000 --- a/drivers/usb/otg/Kconfig +++ /dev/null @@ -1,141 +0,0 @@ -# -# USB OTG infrastructure may be needed for peripheral-only, host-only, -# or OTG-capable configurations when OTG transceivers or controllers -# are used. -# - -comment "OTG and related infrastructure" - -config USB_OTG_UTILS - bool - help - Select this to make sure the build includes objects from - the OTG infrastructure directory. - -if USB || USB_GADGET - -# -# USB Transceiver Drivers -# -config USB_GPIO_VBUS - tristate "GPIO based peripheral-only VBUS sensing 'transceiver'" - depends on GENERIC_GPIO - select USB_OTG_UTILS - help - Provides simple GPIO VBUS sensing for controllers with an - internal transceiver via the usb_phy interface, and - optionally control of a D+ pullup GPIO as well as a VBUS - current limit regulator. - -config ISP1301_OMAP - tristate "Philips ISP1301 with OMAP OTG" - depends on I2C && ARCH_OMAP_OTG - select USB_OTG_UTILS - help - If you say yes here you get support for the Philips ISP1301 - USB-On-The-Go transceiver working with the OMAP OTG controller. - The ISP1301 is a full speed USB transceiver which is used in - products including H2, H3, and H4 development boards for Texas - Instruments OMAP processors. - - This driver can also be built as a module. If so, the module - will be called isp1301_omap. - -config USB_ULPI - bool "Generic ULPI Transceiver Driver" - depends on ARM - select USB_OTG_UTILS - help - Enable this to support ULPI connected USB OTG transceivers which - are likely found on embedded boards. - -config USB_ULPI_VIEWPORT - bool - depends on USB_ULPI - help - Provides read/write operations to the ULPI phy register set for - controllers with a viewport register (e.g. Chipidea/ARC controllers). - -config TWL4030_USB - tristate "TWL4030 USB Transceiver Driver" - depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS - select USB_OTG_UTILS - help - Enable this to support the USB OTG transceiver on TWL4030 - family chips (including the TWL5030 and TPS659x0 devices). - This transceiver supports high and full speed devices plus, - in host mode, low speed. - -config TWL6030_USB - tristate "TWL6030 USB Transceiver Driver" - depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS - select USB_OTG_UTILS - help - Enable this to support the USB OTG transceiver on TWL6030 - family chips. This TWL6030 transceiver has the VBUS and ID GND - and OTG SRP events capabilities. For all other transceiver functionality - UTMI PHY is embedded in OMAP4430. The internal PHY configurations APIs - are hooked to this driver through platform_data structure. - The definition of internal PHY APIs are in the mach-omap2 layer. - -config NOP_USB_XCEIV - tristate "NOP USB Transceiver Driver" - select USB_OTG_UTILS - help - This driver is to be used by all the usb transceiver which are either - built-in with usb ip or which are autonomous and doesn't require any - phy programming such as ISP1x04 etc. - -config USB_MSM_OTG - tristate "OTG support for Qualcomm on-chip USB controller" - depends on (USB || USB_GADGET) && ARCH_MSM - select USB_OTG_UTILS - help - Enable this to support the USB OTG transceiver on MSM chips. It - handles PHY initialization, clock management, and workarounds - required after resetting the hardware and power management. - This driver is required even for peripheral only or host only - mode configurations. - This driver is not supported on boards like trout which - has an external PHY. - -config AB8500_USB - tristate "AB8500 USB Transceiver Driver" - depends on AB8500_CORE - select USB_OTG_UTILS - help - Enable this to support the USB OTG transceiver in AB8500 chip. - This transceiver supports high and full speed devices plus, - in host mode, low speed. - -config FSL_USB2_OTG - bool "Freescale USB OTG Transceiver Driver" - depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND - select USB_OTG - select USB_OTG_UTILS - help - Enable this to support Freescale USB OTG transceiver. - -config USB_MXS_PHY - tristate "Freescale MXS USB PHY support" - depends on ARCH_MXC || ARCH_MXS - select STMP_DEVICE - select USB_OTG_UTILS - help - Enable this to support the Freescale MXS USB PHY. - - MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x. - -config USB_MV_OTG - tristate "Marvell USB OTG support" - depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND - select USB_OTG - select USB_OTG_UTILS - help - Say Y here if you want to build Marvell USB OTG transciever - driver in kernel (including PXA and MMP series). This driver - implements role switch between EHCI host driver and gadget driver. - - To compile this driver as a module, choose M here. - -endif # USB || OTG diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile deleted file mode 100644 index a844b8d35d14..000000000000 --- a/drivers/usb/otg/Makefile +++ /dev/null @@ -1,24 +0,0 @@ -# -# OTG infrastructure and transceiver drivers -# - -ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG -ccflags-$(CONFIG_USB_GADGET_DEBUG) += -DDEBUG - -# infrastructure -obj-$(CONFIG_USB_OTG_UTILS) += otg.o - -# transceiver drivers -obj-$(CONFIG_USB_GPIO_VBUS) += gpio_vbus.o -obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o -obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o -obj-$(CONFIG_TWL6030_USB) += twl6030-usb.o -obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-xceiv.o -obj-$(CONFIG_USB_ULPI) += ulpi.o -obj-$(CONFIG_USB_ULPI_VIEWPORT) += ulpi_viewport.o -obj-$(CONFIG_USB_MSM_OTG) += msm_otg.o -obj-$(CONFIG_AB8500_USB) += ab8500-usb.o -fsl_usb2_otg-objs := fsl_otg.o otg_fsm.o -obj-$(CONFIG_FSL_USB2_OTG) += fsl_usb2_otg.o -obj-$(CONFIG_USB_MXS_PHY) += mxs-phy.o -obj-$(CONFIG_USB_MV_OTG) += mv_otg.o diff --git a/drivers/usb/otg/ab8500-usb.c b/drivers/usb/otg/ab8500-usb.c deleted file mode 100644 index 2d86f26a0183..000000000000 --- a/drivers/usb/otg/ab8500-usb.c +++ /dev/null @@ -1,596 +0,0 @@ -/* - * drivers/usb/otg/ab8500_usb.c - * - * USB transceiver driver for AB8500 chip - * - * Copyright (C) 2010 ST-Ericsson AB - * Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/usb/otg.h> -#include <linux/slab.h> -#include <linux/notifier.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/mfd/abx500.h> -#include <linux/mfd/abx500/ab8500.h> - -#define AB8500_MAIN_WD_CTRL_REG 0x01 -#define AB8500_USB_LINE_STAT_REG 0x80 -#define AB8500_USB_PHY_CTRL_REG 0x8A - -#define AB8500_BIT_OTG_STAT_ID (1 << 0) -#define AB8500_BIT_PHY_CTRL_HOST_EN (1 << 0) -#define AB8500_BIT_PHY_CTRL_DEVICE_EN (1 << 1) -#define AB8500_BIT_WD_CTRL_ENABLE (1 << 0) -#define AB8500_BIT_WD_CTRL_KICK (1 << 1) - -#define AB8500_V1x_LINK_STAT_WAIT (HZ/10) -#define AB8500_WD_KICK_DELAY_US 100 /* usec */ -#define AB8500_WD_V11_DISABLE_DELAY_US 100 /* usec */ -#define AB8500_WD_V10_DISABLE_DELAY_MS 100 /* ms */ - -/* Usb line status register */ -enum ab8500_usb_link_status { - USB_LINK_NOT_CONFIGURED = 0, - USB_LINK_STD_HOST_NC, - USB_LINK_STD_HOST_C_NS, - USB_LINK_STD_HOST_C_S, - USB_LINK_HOST_CHG_NM, - USB_LINK_HOST_CHG_HS, - USB_LINK_HOST_CHG_HS_CHIRP, - USB_LINK_DEDICATED_CHG, - USB_LINK_ACA_RID_A, - USB_LINK_ACA_RID_B, - USB_LINK_ACA_RID_C_NM, - USB_LINK_ACA_RID_C_HS, - USB_LINK_ACA_RID_C_HS_CHIRP, - USB_LINK_HM_IDGND, - USB_LINK_RESERVED, - USB_LINK_NOT_VALID_LINK -}; - -struct ab8500_usb { - struct usb_phy phy; - struct device *dev; - int irq_num_id_rise; - int irq_num_id_fall; - int irq_num_vbus_rise; - int irq_num_vbus_fall; - int irq_num_link_status; - unsigned vbus_draw; - struct delayed_work dwork; - struct work_struct phy_dis_work; - unsigned long link_status_wait; - int rev; -}; - -static inline struct ab8500_usb *phy_to_ab(struct usb_phy *x) -{ - return container_of(x, struct ab8500_usb, phy); -} - -static void ab8500_usb_wd_workaround(struct ab8500_usb *ab) -{ - abx500_set_register_interruptible(ab->dev, - AB8500_SYS_CTRL2_BLOCK, - AB8500_MAIN_WD_CTRL_REG, - AB8500_BIT_WD_CTRL_ENABLE); - - udelay(AB8500_WD_KICK_DELAY_US); - - abx500_set_register_interruptible(ab->dev, - AB8500_SYS_CTRL2_BLOCK, - AB8500_MAIN_WD_CTRL_REG, - (AB8500_BIT_WD_CTRL_ENABLE - | AB8500_BIT_WD_CTRL_KICK)); - - if (ab->rev > 0x10) /* v1.1 v2.0 */ - udelay(AB8500_WD_V11_DISABLE_DELAY_US); - else /* v1.0 */ - msleep(AB8500_WD_V10_DISABLE_DELAY_MS); - - abx500_set_register_interruptible(ab->dev, - AB8500_SYS_CTRL2_BLOCK, - AB8500_MAIN_WD_CTRL_REG, - 0); -} - -static void ab8500_usb_phy_ctrl(struct ab8500_usb *ab, bool sel_host, - bool enable) -{ - u8 ctrl_reg; - abx500_get_register_interruptible(ab->dev, - AB8500_USB, - AB8500_USB_PHY_CTRL_REG, - &ctrl_reg); - if (sel_host) { - if (enable) - ctrl_reg |= AB8500_BIT_PHY_CTRL_HOST_EN; - else - ctrl_reg &= ~AB8500_BIT_PHY_CTRL_HOST_EN; - } else { - if (enable) - ctrl_reg |= AB8500_BIT_PHY_CTRL_DEVICE_EN; - else - ctrl_reg &= ~AB8500_BIT_PHY_CTRL_DEVICE_EN; - } - - abx500_set_register_interruptible(ab->dev, - AB8500_USB, - AB8500_USB_PHY_CTRL_REG, - ctrl_reg); - - /* Needed to enable the phy.*/ - if (enable) - ab8500_usb_wd_workaround(ab); -} - -#define ab8500_usb_host_phy_en(ab) ab8500_usb_phy_ctrl(ab, true, true) -#define ab8500_usb_host_phy_dis(ab) ab8500_usb_phy_ctrl(ab, true, false) -#define ab8500_usb_peri_phy_en(ab) ab8500_usb_phy_ctrl(ab, false, true) -#define ab8500_usb_peri_phy_dis(ab) ab8500_usb_phy_ctrl(ab, false, false) - -static int ab8500_usb_link_status_update(struct ab8500_usb *ab) -{ - u8 reg; - enum ab8500_usb_link_status lsts; - void *v = NULL; - enum usb_phy_events event; - - abx500_get_register_interruptible(ab->dev, - AB8500_USB, - AB8500_USB_LINE_STAT_REG, - ®); - - lsts = (reg >> 3) & 0x0F; - - switch (lsts) { - case USB_LINK_NOT_CONFIGURED: - case USB_LINK_RESERVED: - case USB_LINK_NOT_VALID_LINK: - /* TODO: Disable regulators. */ - ab8500_usb_host_phy_dis(ab); - ab8500_usb_peri_phy_dis(ab); - ab->phy.state = OTG_STATE_B_IDLE; - ab->phy.otg->default_a = false; - ab->vbus_draw = 0; - event = USB_EVENT_NONE; - break; - - case USB_LINK_STD_HOST_NC: - case USB_LINK_STD_HOST_C_NS: - case USB_LINK_STD_HOST_C_S: - case USB_LINK_HOST_CHG_NM: - case USB_LINK_HOST_CHG_HS: - case USB_LINK_HOST_CHG_HS_CHIRP: - if (ab->phy.otg->gadget) { - /* TODO: Enable regulators. */ - ab8500_usb_peri_phy_en(ab); - v = ab->phy.otg->gadget; - } - event = USB_EVENT_VBUS; - break; - - case USB_LINK_HM_IDGND: - if (ab->phy.otg->host) { - /* TODO: Enable regulators. */ - ab8500_usb_host_phy_en(ab); - v = ab->phy.otg->host; - } - ab->phy.state = OTG_STATE_A_IDLE; - ab->phy.otg->default_a = true; - event = USB_EVENT_ID; - break; - - case USB_LINK_ACA_RID_A: - case USB_LINK_ACA_RID_B: - /* TODO */ - case USB_LINK_ACA_RID_C_NM: - case USB_LINK_ACA_RID_C_HS: - case USB_LINK_ACA_RID_C_HS_CHIRP: - case USB_LINK_DEDICATED_CHG: - /* TODO: vbus_draw */ - event = USB_EVENT_CHARGER; - break; - } - - atomic_notifier_call_chain(&ab->phy.notifier, event, v); - - return 0; -} - -static void ab8500_usb_delayed_work(struct work_struct *work) -{ - struct ab8500_usb *ab = container_of(work, struct ab8500_usb, - dwork.work); - - ab8500_usb_link_status_update(ab); -} - -static irqreturn_t ab8500_usb_v1x_common_irq(int irq, void *data) -{ - struct ab8500_usb *ab = (struct ab8500_usb *) data; - - /* Wait for link status to become stable. */ - schedule_delayed_work(&ab->dwork, ab->link_status_wait); - - return IRQ_HANDLED; -} - -static irqreturn_t ab8500_usb_v1x_vbus_fall_irq(int irq, void *data) -{ - struct ab8500_usb *ab = (struct ab8500_usb *) data; - - /* Link status will not be updated till phy is disabled. */ - ab8500_usb_peri_phy_dis(ab); - - /* Wait for link status to become stable. */ - schedule_delayed_work(&ab->dwork, ab->link_status_wait); - - return IRQ_HANDLED; -} - -static irqreturn_t ab8500_usb_v20_irq(int irq, void *data) -{ - struct ab8500_usb *ab = (struct ab8500_usb *) data; - - ab8500_usb_link_status_update(ab); - - return IRQ_HANDLED; -} - -static void ab8500_usb_phy_disable_work(struct work_struct *work) -{ - struct ab8500_usb *ab = container_of(work, struct ab8500_usb, - phy_dis_work); - - if (!ab->phy.otg->host) - ab8500_usb_host_phy_dis(ab); - - if (!ab->phy.otg->gadget) - ab8500_usb_peri_phy_dis(ab); -} - -static int ab8500_usb_set_power(struct usb_phy *phy, unsigned mA) -{ - struct ab8500_usb *ab; - - if (!phy) - return -ENODEV; - - ab = phy_to_ab(phy); - - ab->vbus_draw = mA; - - if (mA) - atomic_notifier_call_chain(&ab->phy.notifier, - USB_EVENT_ENUMERATED, ab->phy.otg->gadget); - return 0; -} - -/* TODO: Implement some way for charging or other drivers to read - * ab->vbus_draw. - */ - -static int ab8500_usb_set_suspend(struct usb_phy *x, int suspend) -{ - /* TODO */ - return 0; -} - -static int ab8500_usb_set_peripheral(struct usb_otg *otg, - struct usb_gadget *gadget) -{ - struct ab8500_usb *ab; - - if (!otg) - return -ENODEV; - - ab = phy_to_ab(otg->phy); - - /* Some drivers call this function in atomic context. - * Do not update ab8500 registers directly till this - * is fixed. - */ - - if (!gadget) { - /* TODO: Disable regulators. */ - otg->gadget = NULL; - schedule_work(&ab->phy_dis_work); - } else { - otg->gadget = gadget; - otg->phy->state = OTG_STATE_B_IDLE; - - /* Phy will not be enabled if cable is already - * plugged-in. Schedule to enable phy. - * Use same delay to avoid any race condition. - */ - schedule_delayed_work(&ab->dwork, ab->link_status_wait); - } - - return 0; -} - -static int ab8500_usb_set_host(struct usb_otg *otg, struct usb_bus *host) -{ - struct ab8500_usb *ab; - - if (!otg) - return -ENODEV; - - ab = phy_to_ab(otg->phy); - - /* Some drivers call this function in atomic context. - * Do not update ab8500 registers directly till this - * is fixed. - */ - - if (!host) { - /* TODO: Disable regulators. */ - otg->host = NULL; - schedule_work(&ab->phy_dis_work); - } else { - otg->host = host; - /* Phy will not be enabled if cable is already - * plugged-in. Schedule to enable phy. - * Use same delay to avoid any race condition. - */ - schedule_delayed_work(&ab->dwork, ab->link_status_wait); - } - - return 0; -} - -static void ab8500_usb_irq_free(struct ab8500_usb *ab) -{ - if (ab->rev < 0x20) { - free_irq(ab->irq_num_id_rise, ab); - free_irq(ab->irq_num_id_fall, ab); - free_irq(ab->irq_num_vbus_rise, ab); - free_irq(ab->irq_num_vbus_fall, ab); - } else { - free_irq(ab->irq_num_link_status, ab); - } -} - -static int ab8500_usb_v1x_res_setup(struct platform_device *pdev, - struct ab8500_usb *ab) -{ - int err; - - ab->irq_num_id_rise = platform_get_irq_byname(pdev, "ID_WAKEUP_R"); - if (ab->irq_num_id_rise < 0) { - dev_err(&pdev->dev, "ID rise irq not found\n"); - return ab->irq_num_id_rise; - } - err = request_threaded_irq(ab->irq_num_id_rise, NULL, - ab8500_usb_v1x_common_irq, - IRQF_NO_SUSPEND | IRQF_SHARED, - "usb-id-rise", ab); - if (err < 0) { - dev_err(ab->dev, "request_irq failed for ID rise irq\n"); - goto fail0; - } - - ab->irq_num_id_fall = platform_get_irq_byname(pdev, "ID_WAKEUP_F"); - if (ab->irq_num_id_fall < 0) { - dev_err(&pdev->dev, "ID fall irq not found\n"); - return ab->irq_num_id_fall; - } - err = request_threaded_irq(ab->irq_num_id_fall, NULL, - ab8500_usb_v1x_common_irq, - IRQF_NO_SUSPEND | IRQF_SHARED, - "usb-id-fall", ab); - if (err < 0) { - dev_err(ab->dev, "request_irq failed for ID fall irq\n"); - goto fail1; - } - - ab->irq_num_vbus_rise = platform_get_irq_byname(pdev, "VBUS_DET_R"); - if (ab->irq_num_vbus_rise < 0) { - dev_err(&pdev->dev, "VBUS rise irq not found\n"); - return ab->irq_num_vbus_rise; - } - err = request_threaded_irq(ab->irq_num_vbus_rise, NULL, - ab8500_usb_v1x_common_irq, - IRQF_NO_SUSPEND | IRQF_SHARED, - "usb-vbus-rise", ab); - if (err < 0) { - dev_err(ab->dev, "request_irq failed for Vbus rise irq\n"); - goto fail2; - } - - ab->irq_num_vbus_fall = platform_get_irq_byname(pdev, "VBUS_DET_F"); - if (ab->irq_num_vbus_fall < 0) { - dev_err(&pdev->dev, "VBUS fall irq not found\n"); - return ab->irq_num_vbus_fall; - } - err = request_threaded_irq(ab->irq_num_vbus_fall, NULL, - ab8500_usb_v1x_vbus_fall_irq, - IRQF_NO_SUSPEND | IRQF_SHARED, - "usb-vbus-fall", ab); - if (err < 0) { - dev_err(ab->dev, "request_irq failed for Vbus fall irq\n"); - goto fail3; - } - - return 0; -fail3: - free_irq(ab->irq_num_vbus_rise, ab); -fail2: - free_irq(ab->irq_num_id_fall, ab); -fail1: - free_irq(ab->irq_num_id_rise, ab); -fail0: - return err; -} - -static int ab8500_usb_v2_res_setup(struct platform_device *pdev, - struct ab8500_usb *ab) -{ - int err; - - ab->irq_num_link_status = platform_get_irq_byname(pdev, - "USB_LINK_STATUS"); - if (ab->irq_num_link_status < 0) { - dev_err(&pdev->dev, "Link status irq not found\n"); - return ab->irq_num_link_status; - } - - err = request_threaded_irq(ab->irq_num_link_status, NULL, - ab8500_usb_v20_irq, - IRQF_NO_SUSPEND | IRQF_SHARED, - "usb-link-status", ab); - if (err < 0) { - dev_err(ab->dev, - "request_irq failed for link status irq\n"); - return err; - } - - return 0; -} - -static int ab8500_usb_probe(struct platform_device *pdev) -{ - struct ab8500_usb *ab; - struct usb_otg *otg; - int err; - int rev; - - rev = abx500_get_chip_id(&pdev->dev); - if (rev < 0) { - dev_err(&pdev->dev, "Chip id read failed\n"); - return rev; - } else if (rev < 0x10) { - dev_err(&pdev->dev, "Unsupported AB8500 chip\n"); - return -ENODEV; - } - - ab = kzalloc(sizeof *ab, GFP_KERNEL); - if (!ab) - return -ENOMEM; - - otg = kzalloc(sizeof *otg, GFP_KERNEL); - if (!otg) { - kfree(ab); - return -ENOMEM; - } - - ab->dev = &pdev->dev; - ab->rev = rev; - ab->phy.dev = ab->dev; - ab->phy.otg = otg; - ab->phy.label = "ab8500"; - ab->phy.set_suspend = ab8500_usb_set_suspend; - ab->phy.set_power = ab8500_usb_set_power; - ab->phy.state = OTG_STATE_UNDEFINED; - - otg->phy = &ab->phy; - otg->set_host = ab8500_usb_set_host; - otg->set_peripheral = ab8500_usb_set_peripheral; - - platform_set_drvdata(pdev, ab); - - ATOMIC_INIT_NOTIFIER_HEAD(&ab->phy.notifier); - - /* v1: Wait for link status to become stable. - * all: Updates form set_host and set_peripheral as they are atomic. - */ - INIT_DELAYED_WORK(&ab->dwork, ab8500_usb_delayed_work); - - /* all: Disable phy when called from set_host and set_peripheral */ - INIT_WORK(&ab->phy_dis_work, ab8500_usb_phy_disable_work); - - if (ab->rev < 0x20) { - err = ab8500_usb_v1x_res_setup(pdev, ab); - ab->link_status_wait = AB8500_V1x_LINK_STAT_WAIT; - } else { - err = ab8500_usb_v2_res_setup(pdev, ab); - } - - if (err < 0) - goto fail0; - - err = usb_add_phy(&ab->phy, USB_PHY_TYPE_USB2); - if (err) { - dev_err(&pdev->dev, "Can't register transceiver\n"); - goto fail1; - } - - dev_info(&pdev->dev, "AB8500 usb driver initialized\n"); - - return 0; -fail1: - ab8500_usb_irq_free(ab); -fail0: - kfree(otg); - kfree(ab); - return err; -} - -static int ab8500_usb_remove(struct platform_device *pdev) -{ - struct ab8500_usb *ab = platform_get_drvdata(pdev); - - ab8500_usb_irq_free(ab); - - cancel_delayed_work_sync(&ab->dwork); - - cancel_work_sync(&ab->phy_dis_work); - - usb_remove_phy(&ab->phy); - - ab8500_usb_host_phy_dis(ab); - ab8500_usb_peri_phy_dis(ab); - - platform_set_drvdata(pdev, NULL); - - kfree(ab->phy.otg); - kfree(ab); - - return 0; -} - -static struct platform_driver ab8500_usb_driver = { - .probe = ab8500_usb_probe, - .remove = ab8500_usb_remove, - .driver = { - .name = "ab8500-usb", - .owner = THIS_MODULE, - }, -}; - -static int __init ab8500_usb_init(void) -{ - return platform_driver_register(&ab8500_usb_driver); -} -subsys_initcall(ab8500_usb_init); - -static void __exit ab8500_usb_exit(void) -{ - platform_driver_unregister(&ab8500_usb_driver); -} -module_exit(ab8500_usb_exit); - -MODULE_ALIAS("platform:ab8500_usb"); -MODULE_AUTHOR("ST-Ericsson AB"); -MODULE_DESCRIPTION("AB8500 usb transceiver driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 90549382eba5..aab2ab2fbc90 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -1,13 +1,74 @@ # # Physical Layer USB driver configuration # -comment "USB Physical Layer drivers" - depends on USB || USB_GADGET +menuconfig USB_PHY + bool "USB Physical Layer drivers" + help + USB controllers (those which are host, device or DRD) need a + device to handle the physical layer signalling, commonly called + a PHY. + + The following drivers add support for such PHY devices. + +if USB_PHY + +# +# USB Transceiver Drivers +# +config AB8500_USB + tristate "AB8500 USB Transceiver Driver" + depends on AB8500_CORE + help + Enable this to support the USB OTG transceiver in AB8500 chip. + This transceiver supports high and full speed devices plus, + in host mode, low speed. + +config FSL_USB2_OTG + bool "Freescale USB OTG Transceiver Driver" + depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND + select USB_OTG + help + Enable this to support Freescale USB OTG transceiver. + +config ISP1301_OMAP + tristate "Philips ISP1301 with OMAP OTG" + depends on I2C && ARCH_OMAP_OTG + help + If you say yes here you get support for the Philips ISP1301 + USB-On-The-Go transceiver working with the OMAP OTG controller. + The ISP1301 is a full speed USB transceiver which is used in + products including H2, H3, and H4 development boards for Texas + Instruments OMAP processors. + + This driver can also be built as a module. If so, the module + will be called isp1301_omap. + +config MV_U3D_PHY + bool "Marvell USB 3.0 PHY controller Driver" + depends on CPU_MMP3 + help + Enable this to support Marvell USB 3.0 phy controller for Marvell + SoC. + +config NOP_USB_XCEIV + tristate "NOP USB Transceiver Driver" + help + This driver is to be used by all the usb transceiver which are either + built-in with usb ip or which are autonomous and doesn't require any + phy programming such as ISP1x04 etc. + +config OMAP_CONTROL_USB + tristate "OMAP CONTROL USB Driver" + help + Enable this to add support for the USB part present in the control + module. This driver has API to power on the USB2 PHY and to write to + the mailbox. The mailbox is present only in omap4 and the register to + power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an + additional register to power on USB3 PHY. config OMAP_USB2 tristate "OMAP USB2 PHY Driver" depends on ARCH_OMAP2PLUS - select USB_OTG_UTILS select OMAP_CONTROL_USB help Enable this to support the transceiver that is part of SOC. This @@ -17,7 +78,6 @@ config OMAP_USB2 config OMAP_USB3 tristate "OMAP USB3 PHY Driver" - select USB_OTG_UTILS select OMAP_CONTROL_USB help Enable this to support the USB3 PHY that is part of SOC. This @@ -25,14 +85,55 @@ config OMAP_USB3 This driver interacts with the "OMAP Control USB Driver" to power on/off the PHY. -config OMAP_CONTROL_USB - tristate "OMAP CONTROL USB Driver" +config SAMSUNG_USBPHY + tristate "Samsung USB PHY Driver" help - Enable this to add support for the USB part present in the control - module. This driver has API to power on the USB2 PHY and to write to - the mailbox. The mailbox is present only in omap4 and the register to - power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an - additional register to power on USB3 PHY. + Enable this to support Samsung USB phy helper driver for Samsung SoCs. + This driver provides common interface to interact, for Samsung USB 2.0 PHY + driver and later for Samsung USB 3.0 PHY driver. + +config SAMSUNG_USB2PHY + tristate "Samsung USB 2.0 PHY controller Driver" + select SAMSUNG_USBPHY + help + Enable this to support Samsung USB 2.0 (High Speed) PHY controller + driver for Samsung SoCs. + +config SAMSUNG_USB3PHY + tristate "Samsung USB 3.0 PHY controller Driver" + select SAMSUNG_USBPHY + help + Enable this to support Samsung USB 3.0 (Super Speed) phy controller + for samsung SoCs. + +config TWL4030_USB + tristate "TWL4030 USB Transceiver Driver" + depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS + help + Enable this to support the USB OTG transceiver on TWL4030 + family chips (including the TWL5030 and TPS659x0 devices). + This transceiver supports high and full speed devices plus, + in host mode, low speed. + +config TWL6030_USB + tristate "TWL6030 USB Transceiver Driver" + depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS + help + Enable this to support the USB OTG transceiver on TWL6030 + family chips. This TWL6030 transceiver has the VBUS and ID GND + and OTG SRP events capabilities. For all other transceiver functionality + UTMI PHY is embedded in OMAP4430. The internal PHY configurations APIs + are hooked to this driver through platform_data structure. + The definition of internal PHY APIs are in the mach-omap2 layer. + +config USB_GPIO_VBUS + tristate "GPIO based peripheral-only VBUS sensing 'transceiver'" + depends on GENERIC_GPIO + help + Provides simple GPIO VBUS sensing for controllers with an + internal transceiver via the usb_phy interface, and + optionally control of a D+ pullup GPIO as well as a VBUS + current limit regulator. config USB_ISP1301 tristate "NXP ISP1301 USB transceiver support" @@ -47,18 +148,41 @@ config USB_ISP1301 To compile this driver as a module, choose M here: the module will be called isp1301. -config MV_U3D_PHY - bool "Marvell USB 3.0 PHY controller Driver" - depends on USB_MV_U3D - select USB_OTG_UTILS +config USB_MSM_OTG + tristate "OTG support for Qualcomm on-chip USB controller" + depends on (USB || USB_GADGET) && ARCH_MSM help - Enable this to support Marvell USB 3.0 phy controller for Marvell - SoC. + Enable this to support the USB OTG transceiver on MSM chips. It + handles PHY initialization, clock management, and workarounds + required after resetting the hardware and power management. + This driver is required even for peripheral only or host only + mode configurations. + This driver is not supported on boards like trout which + has an external PHY. + +config USB_MV_OTG + tristate "Marvell USB OTG support" + depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND + select USB_OTG + help + Say Y here if you want to build Marvell USB OTG transciever + driver in kernel (including PXA and MMP series). This driver + implements role switch between EHCI host driver and gadget driver. + + To compile this driver as a module, choose M here. + +config USB_MXS_PHY + tristate "Freescale MXS USB PHY support" + depends on ARCH_MXC || ARCH_MXS + select STMP_DEVICE + help + Enable this to support the Freescale MXS USB PHY. + + MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x. config USB_RCAR_PHY tristate "Renesas R-Car USB phy support" depends on USB || USB_GADGET - select USB_OTG_UTILS help Say Y here to add support for the Renesas R-Car USB phy driver. This chip is typically used as USB phy for USB host, gadget. @@ -67,10 +191,18 @@ config USB_RCAR_PHY To compile this driver as a module, choose M here: the module will be called rcar-phy. -config SAMSUNG_USBPHY - bool "Samsung USB PHY controller Driver" - depends on USB_S3C_HSOTG || USB_EHCI_S5P || USB_OHCI_EXYNOS - select USB_OTG_UTILS +config USB_ULPI + bool "Generic ULPI Transceiver Driver" + depends on ARM + help + Enable this to support ULPI connected USB OTG transceivers which + are likely found on embedded boards. + +config USB_ULPI_VIEWPORT + bool + depends on USB_ULPI help - Enable this to support Samsung USB phy controller for samsung - SoCs. + Provides read/write operations to the ULPI phy register set for + controllers with a viewport register (e.g. Chipidea/ARC controllers). + +endif # USB_PHY diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index b13faa193e0c..a9169cb1e6fc 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -4,11 +4,30 @@ ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG -obj-$(CONFIG_OMAP_USB2) += omap-usb2.o -obj-$(CONFIG_OMAP_USB3) += omap-usb3.o -obj-$(CONFIG_OMAP_CONTROL_USB) += omap-control-usb.o -obj-$(CONFIG_USB_ISP1301) += isp1301.o -obj-$(CONFIG_MV_U3D_PHY) += mv_u3d_phy.o -obj-$(CONFIG_USB_EHCI_TEGRA) += tegra_usb_phy.o -obj-$(CONFIG_USB_RCAR_PHY) += rcar-phy.o -obj-$(CONFIG_SAMSUNG_USBPHY) += samsung-usbphy.o +obj-$(CONFIG_USB_PHY) += phy.o + +# transceiver drivers, keep the list sorted + +obj-$(CONFIG_AB8500_USB) += phy-ab8500-usb.o +phy-fsl-usb2-objs := phy-fsl-usb.o phy-fsm-usb.o +obj-$(CONFIG_FSL_USB2_OTG) += phy-fsl-usb2.o +obj-$(CONFIG_ISP1301_OMAP) += phy-isp1301-omap.o +obj-$(CONFIG_MV_U3D_PHY) += phy-mv-u3d-usb.o +obj-$(CONFIG_NOP_USB_XCEIV) += phy-nop.o +obj-$(CONFIG_OMAP_CONTROL_USB) += phy-omap-control.o +obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o +obj-$(CONFIG_OMAP_USB3) += phy-omap-usb3.o +obj-$(CONFIG_SAMSUNG_USBPHY) += phy-samsung-usb.o +obj-$(CONFIG_SAMSUNG_USB2PHY) += phy-samsung-usb2.o +obj-$(CONFIG_SAMSUNG_USB3PHY) += phy-samsung-usb3.o +obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o +obj-$(CONFIG_TWL6030_USB) += phy-twl6030-usb.o +obj-$(CONFIG_USB_EHCI_TEGRA) += phy-tegra-usb.o +obj-$(CONFIG_USB_GPIO_VBUS) += phy-gpio-vbus-usb.o +obj-$(CONFIG_USB_ISP1301) += phy-isp1301.o +obj-$(CONFIG_USB_MSM_OTG) += phy-msm-usb.o +obj-$(CONFIG_USB_MV_OTG) += phy-mv-usb.o +obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-usb.o +obj-$(CONFIG_USB_RCAR_PHY) += phy-rcar-usb.o +obj-$(CONFIG_USB_ULPI) += phy-ulpi.o +obj-$(CONFIG_USB_ULPI_VIEWPORT) += phy-ulpi-viewport.o diff --git a/drivers/usb/phy/isp1301.c b/drivers/usb/phy/isp1301.c deleted file mode 100644 index 18dbf7e37607..000000000000 --- a/drivers/usb/phy/isp1301.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * NXP ISP1301 USB transceiver driver - * - * Copyright (C) 2012 Roland Stigge - * - * Author: Roland Stigge <stigge@antcom.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/i2c.h> - -#define DRV_NAME "isp1301" - -static const struct i2c_device_id isp1301_id[] = { - { "isp1301", 0 }, - { } -}; - -static struct i2c_client *isp1301_i2c_client; - -static int isp1301_probe(struct i2c_client *client, - const struct i2c_device_id *i2c_id) -{ - isp1301_i2c_client = client; - return 0; -} - -static int isp1301_remove(struct i2c_client *client) -{ - return 0; -} - -static struct i2c_driver isp1301_driver = { - .driver = { - .name = DRV_NAME, - }, - .probe = isp1301_probe, - .remove = isp1301_remove, - .id_table = isp1301_id, -}; - -module_i2c_driver(isp1301_driver); - -static int match(struct device *dev, void *data) -{ - struct device_node *node = (struct device_node *)data; - return (dev->of_node == node) && - (dev->driver == &isp1301_driver.driver); -} - -struct i2c_client *isp1301_get_client(struct device_node *node) -{ - if (node) { /* reference of ISP1301 I2C node via DT */ - struct device *dev = bus_find_device(&i2c_bus_type, NULL, - node, match); - if (!dev) - return NULL; - return to_i2c_client(dev); - } else { /* non-DT: only one ISP1301 chip supported */ - return isp1301_i2c_client; - } -} -EXPORT_SYMBOL_GPL(isp1301_get_client); - -MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>"); -MODULE_DESCRIPTION("NXP ISP1301 USB transceiver driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c new file mode 100644 index 000000000000..4acef26a2ef5 --- /dev/null +++ b/drivers/usb/phy/phy-ab8500-usb.c @@ -0,0 +1,924 @@ +/* + * drivers/usb/otg/ab8500_usb.c + * + * USB transceiver driver for AB8500 chip + * + * Copyright (C) 2010 ST-Ericsson AB + * Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/usb/otg.h> +#include <linux/slab.h> +#include <linux/notifier.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/mfd/abx500.h> +#include <linux/mfd/abx500/ab8500.h> +#include <linux/usb/musb-ux500.h> +#include <linux/regulator/consumer.h> +#include <linux/pinctrl/consumer.h> + +/* Bank AB8500_SYS_CTRL2_BLOCK */ +#define AB8500_MAIN_WD_CTRL_REG 0x01 + +/* Bank AB8500_USB */ +#define AB8500_USB_LINE_STAT_REG 0x80 +#define AB8505_USB_LINE_STAT_REG 0x94 +#define AB8500_USB_PHY_CTRL_REG 0x8A + +/* Bank AB8500_DEVELOPMENT */ +#define AB8500_BANK12_ACCESS 0x00 + +/* Bank AB8500_DEBUG */ +#define AB8500_USB_PHY_TUNE1 0x05 +#define AB8500_USB_PHY_TUNE2 0x06 +#define AB8500_USB_PHY_TUNE3 0x07 + +#define AB8500_BIT_OTG_STAT_ID (1 << 0) +#define AB8500_BIT_PHY_CTRL_HOST_EN (1 << 0) +#define AB8500_BIT_PHY_CTRL_DEVICE_EN (1 << 1) +#define AB8500_BIT_WD_CTRL_ENABLE (1 << 0) +#define AB8500_BIT_WD_CTRL_KICK (1 << 1) + +#define AB8500_WD_KICK_DELAY_US 100 /* usec */ +#define AB8500_WD_V11_DISABLE_DELAY_US 100 /* usec */ +#define AB8500_V20_31952_DISABLE_DELAY_US 100 /* usec */ + +/* Usb line status register */ +enum ab8500_usb_link_status { + USB_LINK_NOT_CONFIGURED_8500 = 0, + USB_LINK_STD_HOST_NC_8500, + USB_LINK_STD_HOST_C_NS_8500, + USB_LINK_STD_HOST_C_S_8500, + USB_LINK_HOST_CHG_NM_8500, + USB_LINK_HOST_CHG_HS_8500, + USB_LINK_HOST_CHG_HS_CHIRP_8500, + USB_LINK_DEDICATED_CHG_8500, + USB_LINK_ACA_RID_A_8500, + USB_LINK_ACA_RID_B_8500, + USB_LINK_ACA_RID_C_NM_8500, + USB_LINK_ACA_RID_C_HS_8500, + USB_LINK_ACA_RID_C_HS_CHIRP_8500, + USB_LINK_HM_IDGND_8500, + USB_LINK_RESERVED_8500, + USB_LINK_NOT_VALID_LINK_8500, +}; + +enum ab8505_usb_link_status { + USB_LINK_NOT_CONFIGURED_8505 = 0, + USB_LINK_STD_HOST_NC_8505, + USB_LINK_STD_HOST_C_NS_8505, + USB_LINK_STD_HOST_C_S_8505, + USB_LINK_CDP_8505, + USB_LINK_RESERVED0_8505, + USB_LINK_RESERVED1_8505, + USB_LINK_DEDICATED_CHG_8505, + USB_LINK_ACA_RID_A_8505, + USB_LINK_ACA_RID_B_8505, + USB_LINK_ACA_RID_C_NM_8505, + USB_LINK_RESERVED2_8505, + USB_LINK_RESERVED3_8505, + USB_LINK_HM_IDGND_8505, + USB_LINK_CHARGERPORT_NOT_OK_8505, + USB_LINK_CHARGER_DM_HIGH_8505, + USB_LINK_PHYEN_NO_VBUS_NO_IDGND_8505, + USB_LINK_STD_UPSTREAM_NO_IDGNG_NO_VBUS_8505, + USB_LINK_STD_UPSTREAM_8505, + USB_LINK_CHARGER_SE1_8505, + USB_LINK_CARKIT_CHGR_1_8505, + USB_LINK_CARKIT_CHGR_2_8505, + USB_LINK_ACA_DOCK_CHGR_8505, + USB_LINK_SAMSUNG_BOOT_CBL_PHY_EN_8505, + USB_LINK_SAMSUNG_BOOT_CBL_PHY_DISB_8505, + USB_LINK_SAMSUNG_UART_CBL_PHY_EN_8505, + USB_LINK_SAMSUNG_UART_CBL_PHY_DISB_8505, + USB_LINK_MOTOROLA_FACTORY_CBL_PHY_EN_8505, +}; + +enum ab8500_usb_mode { + USB_IDLE = 0, + USB_PERIPHERAL, + USB_HOST, + USB_DEDICATED_CHG +}; + +struct ab8500_usb { + struct usb_phy phy; + struct device *dev; + struct ab8500 *ab8500; + unsigned vbus_draw; + struct work_struct phy_dis_work; + enum ab8500_usb_mode mode; + struct regulator *v_ape; + struct regulator *v_musb; + struct regulator *v_ulpi; + int saved_v_ulpi; + int previous_link_status_state; + struct pinctrl *pinctrl; + struct pinctrl_state *pins_sleep; +}; + +static inline struct ab8500_usb *phy_to_ab(struct usb_phy *x) +{ + return container_of(x, struct ab8500_usb, phy); +} + +static void ab8500_usb_wd_workaround(struct ab8500_usb *ab) +{ + abx500_set_register_interruptible(ab->dev, + AB8500_SYS_CTRL2_BLOCK, + AB8500_MAIN_WD_CTRL_REG, + AB8500_BIT_WD_CTRL_ENABLE); + + udelay(AB8500_WD_KICK_DELAY_US); + + abx500_set_register_interruptible(ab->dev, + AB8500_SYS_CTRL2_BLOCK, + AB8500_MAIN_WD_CTRL_REG, + (AB8500_BIT_WD_CTRL_ENABLE + | AB8500_BIT_WD_CTRL_KICK)); + + udelay(AB8500_WD_V11_DISABLE_DELAY_US); + + abx500_set_register_interruptible(ab->dev, + AB8500_SYS_CTRL2_BLOCK, + AB8500_MAIN_WD_CTRL_REG, + 0); +} + +static void ab8500_usb_regulator_enable(struct ab8500_usb *ab) +{ + int ret, volt; + + ret = regulator_enable(ab->v_ape); + if (ret) + dev_err(ab->dev, "Failed to enable v-ape\n"); + + if (!is_ab8500_2p0_or_earlier(ab->ab8500)) { + ab->saved_v_ulpi = regulator_get_voltage(ab->v_ulpi); + if (ab->saved_v_ulpi < 0) + dev_err(ab->dev, "Failed to get v_ulpi voltage\n"); + + ret = regulator_set_voltage(ab->v_ulpi, 1300000, 1350000); + if (ret < 0) + dev_err(ab->dev, "Failed to set the Vintcore to 1.3V, ret=%d\n", + ret); + + ret = regulator_set_optimum_mode(ab->v_ulpi, 28000); + if (ret < 0) + dev_err(ab->dev, "Failed to set optimum mode (ret=%d)\n", + ret); + } + + ret = regulator_enable(ab->v_ulpi); + if (ret) + dev_err(ab->dev, "Failed to enable vddulpivio18\n"); + + if (!is_ab8500_2p0_or_earlier(ab->ab8500)) { + volt = regulator_get_voltage(ab->v_ulpi); + if ((volt != 1300000) && (volt != 1350000)) + dev_err(ab->dev, "Vintcore is not set to 1.3V volt=%d\n", + volt); + } + + ret = regulator_enable(ab->v_musb); + if (ret) + dev_err(ab->dev, "Failed to enable musb_1v8\n"); +} + +static void ab8500_usb_regulator_disable(struct ab8500_usb *ab) +{ + int ret; + + regulator_disable(ab->v_musb); + + regulator_disable(ab->v_ulpi); + + /* USB is not the only consumer of Vintcore, restore old settings */ + if (!is_ab8500_2p0_or_earlier(ab->ab8500)) { + if (ab->saved_v_ulpi > 0) { + ret = regulator_set_voltage(ab->v_ulpi, + ab->saved_v_ulpi, ab->saved_v_ulpi); + if (ret < 0) + dev_err(ab->dev, "Failed to set the Vintcore to %duV, ret=%d\n", + ab->saved_v_ulpi, ret); + } + + ret = regulator_set_optimum_mode(ab->v_ulpi, 0); + if (ret < 0) + dev_err(ab->dev, "Failed to set optimum mode (ret=%d)\n", + ret); + } + + regulator_disable(ab->v_ape); +} + +static void ab8500_usb_wd_linkstatus(struct ab8500_usb *ab, u8 bit) +{ + /* Workaround for v2.0 bug # 31952 */ + if (is_ab8500_2p0(ab->ab8500)) { + abx500_mask_and_set_register_interruptible(ab->dev, + AB8500_USB, AB8500_USB_PHY_CTRL_REG, + bit, bit); + udelay(AB8500_V20_31952_DISABLE_DELAY_US); + } +} + +static void ab8500_usb_phy_enable(struct ab8500_usb *ab, bool sel_host) +{ + u8 bit; + bit = sel_host ? AB8500_BIT_PHY_CTRL_HOST_EN : + AB8500_BIT_PHY_CTRL_DEVICE_EN; + + /* mux and configure USB pins to DEFAULT state */ + ab->pinctrl = pinctrl_get_select(ab->dev, PINCTRL_STATE_DEFAULT); + if (IS_ERR(ab->pinctrl)) + dev_err(ab->dev, "could not get/set default pinstate\n"); + + ab8500_usb_regulator_enable(ab); + + abx500_mask_and_set_register_interruptible(ab->dev, + AB8500_USB, AB8500_USB_PHY_CTRL_REG, + bit, bit); +} + +static void ab8500_usb_phy_disable(struct ab8500_usb *ab, bool sel_host) +{ + u8 bit; + bit = sel_host ? AB8500_BIT_PHY_CTRL_HOST_EN : + AB8500_BIT_PHY_CTRL_DEVICE_EN; + + ab8500_usb_wd_linkstatus(ab, bit); + + abx500_mask_and_set_register_interruptible(ab->dev, + AB8500_USB, AB8500_USB_PHY_CTRL_REG, + bit, 0); + + /* Needed to disable the phy.*/ + ab8500_usb_wd_workaround(ab); + + ab8500_usb_regulator_disable(ab); + + if (!IS_ERR(ab->pinctrl)) { + /* configure USB pins to SLEEP state */ + ab->pins_sleep = pinctrl_lookup_state(ab->pinctrl, + PINCTRL_STATE_SLEEP); + + if (IS_ERR(ab->pins_sleep)) + dev_dbg(ab->dev, "could not get sleep pinstate\n"); + else if (pinctrl_select_state(ab->pinctrl, ab->pins_sleep)) + dev_err(ab->dev, "could not set pins to sleep state\n"); + + /* as USB pins are shared with idddet, release them to allow + * iddet to request them + */ + pinctrl_put(ab->pinctrl); + } +} + +#define ab8500_usb_host_phy_en(ab) ab8500_usb_phy_enable(ab, true) +#define ab8500_usb_host_phy_dis(ab) ab8500_usb_phy_disable(ab, true) +#define ab8500_usb_peri_phy_en(ab) ab8500_usb_phy_enable(ab, false) +#define ab8500_usb_peri_phy_dis(ab) ab8500_usb_phy_disable(ab, false) + +static int ab8505_usb_link_status_update(struct ab8500_usb *ab, + enum ab8505_usb_link_status lsts) +{ + enum ux500_musb_vbus_id_status event = 0; + + dev_dbg(ab->dev, "ab8505_usb_link_status_update %d\n", lsts); + + /* + * Spurious link_status interrupts are seen at the time of + * disconnection of a device in RIDA state + */ + if (ab->previous_link_status_state == USB_LINK_ACA_RID_A_8505 && + (lsts == USB_LINK_STD_HOST_NC_8505)) + return 0; + + ab->previous_link_status_state = lsts; + + switch (lsts) { + case USB_LINK_ACA_RID_B_8505: + event = UX500_MUSB_RIDB; + case USB_LINK_NOT_CONFIGURED_8505: + case USB_LINK_RESERVED0_8505: + case USB_LINK_RESERVED1_8505: + case USB_LINK_RESERVED2_8505: + case USB_LINK_RESERVED3_8505: + ab->mode = USB_IDLE; + ab->phy.otg->default_a = false; + ab->vbus_draw = 0; + if (event != UX500_MUSB_RIDB) + event = UX500_MUSB_NONE; + /* + * Fallback to default B_IDLE as nothing + * is connected + */ + ab->phy.state = OTG_STATE_B_IDLE; + break; + + case USB_LINK_ACA_RID_C_NM_8505: + event = UX500_MUSB_RIDC; + case USB_LINK_STD_HOST_NC_8505: + case USB_LINK_STD_HOST_C_NS_8505: + case USB_LINK_STD_HOST_C_S_8505: + case USB_LINK_CDP_8505: + if (ab->mode == USB_IDLE) { + ab->mode = USB_PERIPHERAL; + ab8500_usb_peri_phy_en(ab); + atomic_notifier_call_chain(&ab->phy.notifier, + UX500_MUSB_PREPARE, &ab->vbus_draw); + } + if (event != UX500_MUSB_RIDC) + event = UX500_MUSB_VBUS; + break; + + case USB_LINK_ACA_RID_A_8505: + case USB_LINK_ACA_DOCK_CHGR_8505: + event = UX500_MUSB_RIDA; + case USB_LINK_HM_IDGND_8505: + if (ab->mode == USB_IDLE) { + ab->mode = USB_HOST; + ab8500_usb_host_phy_en(ab); + atomic_notifier_call_chain(&ab->phy.notifier, + UX500_MUSB_PREPARE, &ab->vbus_draw); + } + ab->phy.otg->default_a = true; + if (event != UX500_MUSB_RIDA) + event = UX500_MUSB_ID; + atomic_notifier_call_chain(&ab->phy.notifier, + event, &ab->vbus_draw); + break; + + case USB_LINK_DEDICATED_CHG_8505: + ab->mode = USB_DEDICATED_CHG; + event = UX500_MUSB_CHARGER; + atomic_notifier_call_chain(&ab->phy.notifier, + event, &ab->vbus_draw); + break; + + default: + break; + } + + return 0; +} + +static int ab8500_usb_link_status_update(struct ab8500_usb *ab, + enum ab8500_usb_link_status lsts) +{ + enum ux500_musb_vbus_id_status event = 0; + + dev_dbg(ab->dev, "ab8500_usb_link_status_update %d\n", lsts); + + /* + * Spurious link_status interrupts are seen in case of a + * disconnection of a device in IDGND and RIDA stage + */ + if (ab->previous_link_status_state == USB_LINK_HM_IDGND_8500 && + (lsts == USB_LINK_STD_HOST_C_NS_8500 || + lsts == USB_LINK_STD_HOST_NC_8500)) + return 0; + + if (ab->previous_link_status_state == USB_LINK_ACA_RID_A_8500 && + lsts == USB_LINK_STD_HOST_NC_8500) + return 0; + + ab->previous_link_status_state = lsts; + + switch (lsts) { + case USB_LINK_ACA_RID_B_8500: + event = UX500_MUSB_RIDB; + case USB_LINK_NOT_CONFIGURED_8500: + case USB_LINK_NOT_VALID_LINK_8500: + ab->mode = USB_IDLE; + ab->phy.otg->default_a = false; + ab->vbus_draw = 0; + if (event != UX500_MUSB_RIDB) + event = UX500_MUSB_NONE; + /* Fallback to default B_IDLE as nothing is connected */ + ab->phy.state = OTG_STATE_B_IDLE; + break; + + case USB_LINK_ACA_RID_C_NM_8500: + case USB_LINK_ACA_RID_C_HS_8500: + case USB_LINK_ACA_RID_C_HS_CHIRP_8500: + event = UX500_MUSB_RIDC; + case USB_LINK_STD_HOST_NC_8500: + case USB_LINK_STD_HOST_C_NS_8500: + case USB_LINK_STD_HOST_C_S_8500: + case USB_LINK_HOST_CHG_NM_8500: + case USB_LINK_HOST_CHG_HS_8500: + case USB_LINK_HOST_CHG_HS_CHIRP_8500: + if (ab->mode == USB_IDLE) { + ab->mode = USB_PERIPHERAL; + ab8500_usb_peri_phy_en(ab); + atomic_notifier_call_chain(&ab->phy.notifier, + UX500_MUSB_PREPARE, &ab->vbus_draw); + } + if (event != UX500_MUSB_RIDC) + event = UX500_MUSB_VBUS; + break; + + case USB_LINK_ACA_RID_A_8500: + event = UX500_MUSB_RIDA; + case USB_LINK_HM_IDGND_8500: + if (ab->mode == USB_IDLE) { + ab->mode = USB_HOST; + ab8500_usb_host_phy_en(ab); + atomic_notifier_call_chain(&ab->phy.notifier, + UX500_MUSB_PREPARE, &ab->vbus_draw); + } + ab->phy.otg->default_a = true; + if (event != UX500_MUSB_RIDA) + event = UX500_MUSB_ID; + atomic_notifier_call_chain(&ab->phy.notifier, + event, &ab->vbus_draw); + break; + + case USB_LINK_DEDICATED_CHG_8500: + ab->mode = USB_DEDICATED_CHG; + event = UX500_MUSB_CHARGER; + atomic_notifier_call_chain(&ab->phy.notifier, + event, &ab->vbus_draw); + break; + + case USB_LINK_RESERVED_8500: + break; + } + + return 0; +} + +/* + * Connection Sequence: + * 1. Link Status Interrupt + * 2. Enable AB clock + * 3. Enable AB regulators + * 4. Enable USB phy + * 5. Reset the musb controller + * 6. Switch the ULPI GPIO pins to fucntion mode + * 7. Enable the musb Peripheral5 clock + * 8. Restore MUSB context + */ +static int abx500_usb_link_status_update(struct ab8500_usb *ab) +{ + u8 reg; + int ret = 0; + + if (is_ab8500(ab->ab8500)) { + enum ab8500_usb_link_status lsts; + + abx500_get_register_interruptible(ab->dev, + AB8500_USB, AB8500_USB_LINE_STAT_REG, ®); + lsts = (reg >> 3) & 0x0F; + ret = ab8500_usb_link_status_update(ab, lsts); + } else if (is_ab8505(ab->ab8500)) { + enum ab8505_usb_link_status lsts; + + abx500_get_register_interruptible(ab->dev, + AB8500_USB, AB8505_USB_LINE_STAT_REG, ®); + lsts = (reg >> 3) & 0x1F; + ret = ab8505_usb_link_status_update(ab, lsts); + } + + return ret; +} + +/* + * Disconnection Sequence: + * 1. Disconect Interrupt + * 2. Disable regulators + * 3. Disable AB clock + * 4. Disable the Phy + * 5. Link Status Interrupt + * 6. Disable Musb Clock + */ +static irqreturn_t ab8500_usb_disconnect_irq(int irq, void *data) +{ + struct ab8500_usb *ab = (struct ab8500_usb *) data; + enum usb_phy_events event = UX500_MUSB_NONE; + + /* Link status will not be updated till phy is disabled. */ + if (ab->mode == USB_HOST) { + ab->phy.otg->default_a = false; + ab->vbus_draw = 0; + atomic_notifier_call_chain(&ab->phy.notifier, + event, &ab->vbus_draw); + ab8500_usb_host_phy_dis(ab); + ab->mode = USB_IDLE; + } + + if (ab->mode == USB_PERIPHERAL) { + atomic_notifier_call_chain(&ab->phy.notifier, + event, &ab->vbus_draw); + ab8500_usb_peri_phy_dis(ab); + atomic_notifier_call_chain(&ab->phy.notifier, + UX500_MUSB_CLEAN, &ab->vbus_draw); + ab->mode = USB_IDLE; + ab->phy.otg->default_a = false; + ab->vbus_draw = 0; + } + + if (is_ab8500_2p0(ab->ab8500)) { + if (ab->mode == USB_DEDICATED_CHG) { + ab8500_usb_wd_linkstatus(ab, + AB8500_BIT_PHY_CTRL_DEVICE_EN); + abx500_mask_and_set_register_interruptible(ab->dev, + AB8500_USB, AB8500_USB_PHY_CTRL_REG, + AB8500_BIT_PHY_CTRL_DEVICE_EN, 0); + } + } + + return IRQ_HANDLED; +} + +static irqreturn_t ab8500_usb_link_status_irq(int irq, void *data) +{ + struct ab8500_usb *ab = (struct ab8500_usb *) data; + + abx500_usb_link_status_update(ab); + + return IRQ_HANDLED; +} + +static void ab8500_usb_phy_disable_work(struct work_struct *work) +{ + struct ab8500_usb *ab = container_of(work, struct ab8500_usb, + phy_dis_work); + + if (!ab->phy.otg->host) + ab8500_usb_host_phy_dis(ab); + + if (!ab->phy.otg->gadget) + ab8500_usb_peri_phy_dis(ab); +} + +static unsigned ab8500_eyediagram_workaroud(struct ab8500_usb *ab, unsigned mA) +{ + /* + * AB8500 V2 has eye diagram issues when drawing more than 100mA from + * VBUS. Set charging current to 100mA in case of standard host + */ + if (is_ab8500_2p0_or_earlier(ab->ab8500)) + if (mA > 100) + mA = 100; + + return mA; +} + +static int ab8500_usb_set_power(struct usb_phy *phy, unsigned mA) +{ + struct ab8500_usb *ab; + + if (!phy) + return -ENODEV; + + ab = phy_to_ab(phy); + + mA = ab8500_eyediagram_workaroud(ab, mA); + + ab->vbus_draw = mA; + + atomic_notifier_call_chain(&ab->phy.notifier, + UX500_MUSB_VBUS, &ab->vbus_draw); + + return 0; +} + +static int ab8500_usb_set_suspend(struct usb_phy *x, int suspend) +{ + /* TODO */ + return 0; +} + +static int ab8500_usb_set_peripheral(struct usb_otg *otg, + struct usb_gadget *gadget) +{ + struct ab8500_usb *ab; + + if (!otg) + return -ENODEV; + + ab = phy_to_ab(otg->phy); + + ab->phy.otg->gadget = gadget; + + /* Some drivers call this function in atomic context. + * Do not update ab8500 registers directly till this + * is fixed. + */ + + if ((ab->mode != USB_IDLE) && (!gadget)) { + ab->mode = USB_IDLE; + schedule_work(&ab->phy_dis_work); + } + + return 0; +} + +static int ab8500_usb_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + struct ab8500_usb *ab; + + if (!otg) + return -ENODEV; + + ab = phy_to_ab(otg->phy); + + ab->phy.otg->host = host; + + /* Some drivers call this function in atomic context. + * Do not update ab8500 registers directly till this + * is fixed. + */ + + if ((ab->mode != USB_IDLE) && (!host)) { + ab->mode = USB_IDLE; + schedule_work(&ab->phy_dis_work); + } + + return 0; +} + +static int ab8500_usb_regulator_get(struct ab8500_usb *ab) +{ + int err; + + ab->v_ape = devm_regulator_get(ab->dev, "v-ape"); + if (IS_ERR(ab->v_ape)) { + dev_err(ab->dev, "Could not get v-ape supply\n"); + err = PTR_ERR(ab->v_ape); + return err; + } + + ab->v_ulpi = devm_regulator_get(ab->dev, "vddulpivio18"); + if (IS_ERR(ab->v_ulpi)) { + dev_err(ab->dev, "Could not get vddulpivio18 supply\n"); + err = PTR_ERR(ab->v_ulpi); + return err; + } + + ab->v_musb = devm_regulator_get(ab->dev, "musb_1v8"); + if (IS_ERR(ab->v_musb)) { + dev_err(ab->dev, "Could not get musb_1v8 supply\n"); + err = PTR_ERR(ab->v_musb); + return err; + } + + return 0; +} + +static int ab8500_usb_irq_setup(struct platform_device *pdev, + struct ab8500_usb *ab) +{ + int err; + int irq; + + irq = platform_get_irq_byname(pdev, "USB_LINK_STATUS"); + if (irq < 0) { + dev_err(&pdev->dev, "Link status irq not found\n"); + return irq; + } + err = devm_request_threaded_irq(&pdev->dev, irq, NULL, + ab8500_usb_link_status_irq, + IRQF_NO_SUSPEND | IRQF_SHARED, "usb-link-status", ab); + if (err < 0) { + dev_err(ab->dev, "request_irq failed for link status irq\n"); + return err; + } + + irq = platform_get_irq_byname(pdev, "ID_WAKEUP_F"); + if (irq < 0) { + dev_err(&pdev->dev, "ID fall irq not found\n"); + return irq; + } + err = devm_request_threaded_irq(&pdev->dev, irq, NULL, + ab8500_usb_disconnect_irq, + IRQF_NO_SUSPEND | IRQF_SHARED, "usb-id-fall", ab); + if (err < 0) { + dev_err(ab->dev, "request_irq failed for ID fall irq\n"); + return err; + } + + irq = platform_get_irq_byname(pdev, "VBUS_DET_F"); + if (irq < 0) { + dev_err(&pdev->dev, "VBUS fall irq not found\n"); + return irq; + } + err = devm_request_threaded_irq(&pdev->dev, irq, NULL, + ab8500_usb_disconnect_irq, + IRQF_NO_SUSPEND | IRQF_SHARED, "usb-vbus-fall", ab); + if (err < 0) { + dev_err(ab->dev, "request_irq failed for Vbus fall irq\n"); + return err; + } + + return 0; +} + +static int ab8500_usb_probe(struct platform_device *pdev) +{ + struct ab8500_usb *ab; + struct ab8500 *ab8500; + struct usb_otg *otg; + int err; + int rev; + + ab8500 = dev_get_drvdata(pdev->dev.parent); + rev = abx500_get_chip_id(&pdev->dev); + + if (is_ab8500_1p1_or_earlier(ab8500)) { + dev_err(&pdev->dev, "Unsupported AB8500 chip rev=%d\n", rev); + return -ENODEV; + } + + ab = devm_kzalloc(&pdev->dev, sizeof(*ab), GFP_KERNEL); + if (!ab) + return -ENOMEM; + + otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL); + if (!otg) + return -ENOMEM; + + ab->dev = &pdev->dev; + ab->ab8500 = ab8500; + ab->phy.dev = ab->dev; + ab->phy.otg = otg; + ab->phy.label = "ab8500"; + ab->phy.set_suspend = ab8500_usb_set_suspend; + ab->phy.set_power = ab8500_usb_set_power; + ab->phy.state = OTG_STATE_UNDEFINED; + + otg->phy = &ab->phy; + otg->set_host = ab8500_usb_set_host; + otg->set_peripheral = ab8500_usb_set_peripheral; + + platform_set_drvdata(pdev, ab); + + ATOMIC_INIT_NOTIFIER_HEAD(&ab->phy.notifier); + + /* all: Disable phy when called from set_host and set_peripheral */ + INIT_WORK(&ab->phy_dis_work, ab8500_usb_phy_disable_work); + + err = ab8500_usb_regulator_get(ab); + if (err) + return err; + + err = ab8500_usb_irq_setup(pdev, ab); + if (err < 0) + return err; + + err = usb_add_phy(&ab->phy, USB_PHY_TYPE_USB2); + if (err) { + dev_err(&pdev->dev, "Can't register transceiver\n"); + return err; + } + + /* Phy tuning values for AB8500 */ + if (!is_ab8500_2p0_or_earlier(ab->ab8500)) { + /* Enable the PBT/Bank 0x12 access */ + err = abx500_set_register_interruptible(ab->dev, + AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x01); + if (err < 0) + dev_err(ab->dev, "Failed to enable bank12 access err=%d\n", + err); + + err = abx500_set_register_interruptible(ab->dev, + AB8500_DEBUG, AB8500_USB_PHY_TUNE1, 0xC8); + if (err < 0) + dev_err(ab->dev, "Failed to set PHY_TUNE1 register err=%d\n", + err); + + err = abx500_set_register_interruptible(ab->dev, + AB8500_DEBUG, AB8500_USB_PHY_TUNE2, 0x00); + if (err < 0) + dev_err(ab->dev, "Failed to set PHY_TUNE2 register err=%d\n", + err); + + err = abx500_set_register_interruptible(ab->dev, + AB8500_DEBUG, AB8500_USB_PHY_TUNE3, 0x78); + if (err < 0) + dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n", + err); + + /* Switch to normal mode/disable Bank 0x12 access */ + err = abx500_set_register_interruptible(ab->dev, + AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x00); + if (err < 0) + dev_err(ab->dev, "Failed to switch bank12 access err=%d\n", + err); + } + + /* Phy tuning values for AB8505 */ + if (is_ab8505(ab->ab8500)) { + /* Enable the PBT/Bank 0x12 access */ + err = abx500_mask_and_set_register_interruptible(ab->dev, + AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, + 0x01, 0x01); + if (err < 0) + dev_err(ab->dev, "Failed to enable bank12 access err=%d\n", + err); + + err = abx500_mask_and_set_register_interruptible(ab->dev, + AB8500_DEBUG, AB8500_USB_PHY_TUNE1, + 0xC8, 0xC8); + if (err < 0) + dev_err(ab->dev, "Failed to set PHY_TUNE1 register err=%d\n", + err); + + err = abx500_mask_and_set_register_interruptible(ab->dev, + AB8500_DEBUG, AB8500_USB_PHY_TUNE2, + 0x60, 0x60); + if (err < 0) + dev_err(ab->dev, "Failed to set PHY_TUNE2 register err=%d\n", + err); + + err = abx500_mask_and_set_register_interruptible(ab->dev, + AB8500_DEBUG, AB8500_USB_PHY_TUNE3, + 0xFC, 0x80); + + if (err < 0) + dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n", + err); + + /* Switch to normal mode/disable Bank 0x12 access */ + err = abx500_mask_and_set_register_interruptible(ab->dev, + AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, + 0x00, 0x00); + if (err < 0) + dev_err(ab->dev, "Failed to switch bank12 access err=%d\n", + err); + } + + /* Needed to enable ID detection. */ + ab8500_usb_wd_workaround(ab); + + abx500_usb_link_status_update(ab); + + dev_info(&pdev->dev, "revision 0x%2x driver initialized\n", rev); + + return 0; +} + +static int ab8500_usb_remove(struct platform_device *pdev) +{ + struct ab8500_usb *ab = platform_get_drvdata(pdev); + + cancel_work_sync(&ab->phy_dis_work); + + usb_remove_phy(&ab->phy); + + if (ab->mode == USB_HOST) + ab8500_usb_host_phy_dis(ab); + else if (ab->mode == USB_PERIPHERAL) + ab8500_usb_peri_phy_dis(ab); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver ab8500_usb_driver = { + .probe = ab8500_usb_probe, + .remove = ab8500_usb_remove, + .driver = { + .name = "ab8500-usb", + .owner = THIS_MODULE, + }, +}; + +static int __init ab8500_usb_init(void) +{ + return platform_driver_register(&ab8500_usb_driver); +} +subsys_initcall(ab8500_usb_init); + +static void __exit ab8500_usb_exit(void) +{ + platform_driver_unregister(&ab8500_usb_driver); +} +module_exit(ab8500_usb_exit); + +MODULE_ALIAS("platform:ab8500_usb"); +MODULE_AUTHOR("ST-Ericsson AB"); +MODULE_DESCRIPTION("AB8500 usb transceiver driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/otg/fsl_otg.c b/drivers/usb/phy/phy-fsl-usb.c index d16adb41eb21..97b9308507c3 100644 --- a/drivers/usb/otg/fsl_otg.c +++ b/drivers/usb/phy/phy-fsl-usb.c @@ -43,7 +43,7 @@ #include <asm/unaligned.h> -#include "fsl_otg.h" +#include "phy-fsl-usb.h" #define DRIVER_VERSION "Rev. 1.55" #define DRIVER_AUTHOR "Jerry Huang/Li Yang" @@ -361,28 +361,18 @@ int fsl_otg_init_timers(struct otg_fsm *fsm) void fsl_otg_uninit_timers(void) { /* FSM used timers */ - if (a_wait_vrise_tmr != NULL) - kfree(a_wait_vrise_tmr); - if (a_wait_bcon_tmr != NULL) - kfree(a_wait_bcon_tmr); - if (a_aidl_bdis_tmr != NULL) - kfree(a_aidl_bdis_tmr); - if (b_ase0_brst_tmr != NULL) - kfree(b_ase0_brst_tmr); - if (b_se0_srp_tmr != NULL) - kfree(b_se0_srp_tmr); - if (b_srp_fail_tmr != NULL) - kfree(b_srp_fail_tmr); - if (a_wait_enum_tmr != NULL) - kfree(a_wait_enum_tmr); + kfree(a_wait_vrise_tmr); + kfree(a_wait_bcon_tmr); + kfree(a_aidl_bdis_tmr); + kfree(b_ase0_brst_tmr); + kfree(b_se0_srp_tmr); + kfree(b_srp_fail_tmr); + kfree(a_wait_enum_tmr); /* device driver used timers */ - if (b_srp_wait_tmr != NULL) - kfree(b_srp_wait_tmr); - if (b_data_pulse_tmr != NULL) - kfree(b_data_pulse_tmr); - if (b_vbus_pulse_tmr != NULL) - kfree(b_vbus_pulse_tmr); + kfree(b_srp_wait_tmr); + kfree(b_data_pulse_tmr); + kfree(b_vbus_pulse_tmr); } /* Add timer to timer list */ @@ -1002,7 +992,7 @@ static int show_fsl_usb2_otg_state(struct device *dev, /* State */ t = scnprintf(next, size, "OTG state: %s\n\n", - otg_state_string(fsl_otg_dev->phy.state)); + usb_otg_state_string(fsl_otg_dev->phy.state)); size -= t; next += t; diff --git a/drivers/usb/otg/fsl_otg.h b/drivers/usb/phy/phy-fsl-usb.h index ca266280895d..ca266280895d 100644 --- a/drivers/usb/otg/fsl_otg.h +++ b/drivers/usb/phy/phy-fsl-usb.h diff --git a/drivers/usb/otg/otg_fsm.c b/drivers/usb/phy/phy-fsm-usb.c index ade131a8ae5e..c520b3548e7c 100644 --- a/drivers/usb/otg/otg_fsm.c +++ b/drivers/usb/phy/phy-fsm-usb.c @@ -29,7 +29,7 @@ #include <linux/usb/gadget.h> #include <linux/usb/otg.h> -#include "otg_fsm.h" +#include "phy-otg-fsm.h" /* Change USB protocol when there is a protocol change */ static int otg_set_protocol(struct otg_fsm *fsm, int protocol) @@ -119,7 +119,7 @@ int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state) state_changed = 1; if (fsm->otg->phy->state == new_state) return 0; - VDBG("Set state: %s\n", otg_state_string(new_state)); + VDBG("Set state: %s\n", usb_otg_state_string(new_state)); otg_leave_state(fsm, fsm->otg->phy->state); switch (new_state) { case OTG_STATE_B_IDLE: diff --git a/drivers/usb/otg/otg_fsm.h b/drivers/usb/phy/phy-fsm-usb.h index c30a2e1d9e46..c30a2e1d9e46 100644 --- a/drivers/usb/otg/otg_fsm.h +++ b/drivers/usb/phy/phy-fsm-usb.h diff --git a/drivers/usb/otg/gpio_vbus.c b/drivers/usb/phy/phy-gpio-vbus-usb.c index a7d4ac591982..4c76074e518d 100644 --- a/drivers/usb/otg/gpio_vbus.c +++ b/drivers/usb/phy/phy-gpio-vbus-usb.c @@ -61,6 +61,7 @@ static void set_vbus_draw(struct gpio_vbus_data *gpio_vbus, unsigned mA) { struct regulator *vbus_draw = gpio_vbus->vbus_draw; int enabled; + int ret; if (!vbus_draw) return; @@ -69,12 +70,16 @@ static void set_vbus_draw(struct gpio_vbus_data *gpio_vbus, unsigned mA) if (mA) { regulator_set_current_limit(vbus_draw, 0, 1000 * mA); if (!enabled) { - regulator_enable(vbus_draw); + ret = regulator_enable(vbus_draw); + if (ret < 0) + return; gpio_vbus->vbus_draw_enabled = 1; } } else { if (enabled) { - regulator_disable(vbus_draw); + ret = regulator_disable(vbus_draw); + if (ret < 0) + return; gpio_vbus->vbus_draw_enabled = 0; } } diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/phy/phy-isp1301-omap.c index af9cb11626b2..ae481afcb3ec 100644 --- a/drivers/usb/otg/isp1301_omap.c +++ b/drivers/usb/phy/phy-isp1301-omap.c @@ -236,7 +236,7 @@ isp1301_clear_bits(struct isp1301 *isp, u8 reg, u8 bits) static inline const char *state_name(struct isp1301 *isp) { - return otg_state_string(isp->phy.state); + return usb_otg_state_string(isp->phy.state); } /*-------------------------------------------------------------------------*/ @@ -481,7 +481,7 @@ static void check_state(struct isp1301 *isp, const char *tag) if (isp->phy.state == state && !extra) return; pr_debug("otg: %s FSM %s/%02x, %s, %06x\n", tag, - otg_state_string(state), fsm, state_name(isp), + usb_otg_state_string(state), fsm, state_name(isp), omap_readl(OTG_CTRL)); } @@ -1077,7 +1077,7 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat) if (state != isp->phy.state) pr_debug(" isp, %s -> %s\n", - otg_state_string(state), state_name(isp)); + usb_otg_state_string(state), state_name(isp)); #ifdef CONFIG_USB_OTG /* update the OTG controller state to match the isp1301; may @@ -1212,7 +1212,7 @@ static void isp1301_release(struct device *dev) static struct isp1301 *the_transceiver; -static int __exit isp1301_remove(struct i2c_client *i2c) +static int isp1301_remove(struct i2c_client *i2c) { struct isp1301 *isp; @@ -1634,7 +1634,7 @@ static struct i2c_driver isp1301_driver = { .name = "isp1301_omap", }, .probe = isp1301_probe, - .remove = __exit_p(isp1301_remove), + .remove = isp1301_remove, .id_table = isp1301_id, }; diff --git a/drivers/usb/phy/phy-isp1301.c b/drivers/usb/phy/phy-isp1301.c new file mode 100644 index 000000000000..225ae6c97eeb --- /dev/null +++ b/drivers/usb/phy/phy-isp1301.c @@ -0,0 +1,162 @@ +/* + * NXP ISP1301 USB transceiver driver + * + * Copyright (C) 2012 Roland Stigge + * + * Author: Roland Stigge <stigge@antcom.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/i2c.h> +#include <linux/usb/phy.h> +#include <linux/usb/isp1301.h> + +#define DRV_NAME "isp1301" + +struct isp1301 { + struct usb_phy phy; + struct mutex mutex; + + struct i2c_client *client; +}; + +#define phy_to_isp(p) (container_of((p), struct isp1301, phy)) + +static const struct i2c_device_id isp1301_id[] = { + { "isp1301", 0 }, + { } +}; + +static struct i2c_client *isp1301_i2c_client; + +static int __isp1301_write(struct isp1301 *isp, u8 reg, u8 value, u8 clear) +{ + return i2c_smbus_write_byte_data(isp->client, reg | clear, value); +} + +static int isp1301_write(struct isp1301 *isp, u8 reg, u8 value) +{ + return __isp1301_write(isp, reg, value, 0); +} + +static int isp1301_clear(struct isp1301 *isp, u8 reg, u8 value) +{ + return __isp1301_write(isp, reg, value, ISP1301_I2C_REG_CLEAR_ADDR); +} + +static int isp1301_phy_init(struct usb_phy *phy) +{ + struct isp1301 *isp = phy_to_isp(phy); + + /* Disable transparent UART mode first */ + isp1301_clear(isp, ISP1301_I2C_MODE_CONTROL_1, MC1_UART_EN); + isp1301_clear(isp, ISP1301_I2C_MODE_CONTROL_1, ~MC1_SPEED_REG); + isp1301_write(isp, ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG); + isp1301_clear(isp, ISP1301_I2C_MODE_CONTROL_2, ~0); + isp1301_write(isp, ISP1301_I2C_MODE_CONTROL_2, (MC2_BI_DI | MC2_PSW_EN + | MC2_SPD_SUSP_CTRL)); + + isp1301_clear(isp, ISP1301_I2C_OTG_CONTROL_1, ~0); + isp1301_write(isp, ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0); + isp1301_write(isp, ISP1301_I2C_OTG_CONTROL_1, (OTG1_DM_PULLDOWN + | OTG1_DP_PULLDOWN)); + isp1301_clear(isp, ISP1301_I2C_OTG_CONTROL_1, (OTG1_DM_PULLUP + | OTG1_DP_PULLUP)); + + /* mask all interrupts */ + isp1301_clear(isp, ISP1301_I2C_INTERRUPT_LATCH, ~0); + isp1301_clear(isp, ISP1301_I2C_INTERRUPT_FALLING, ~0); + isp1301_clear(isp, ISP1301_I2C_INTERRUPT_RISING, ~0); + + return 0; +} + +static int isp1301_phy_set_vbus(struct usb_phy *phy, int on) +{ + struct isp1301 *isp = phy_to_isp(phy); + + if (on) + isp1301_write(isp, ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DRV); + else + isp1301_clear(isp, ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DRV); + + return 0; +} + +static int isp1301_probe(struct i2c_client *client, + const struct i2c_device_id *i2c_id) +{ + struct isp1301 *isp; + struct usb_phy *phy; + + isp = devm_kzalloc(&client->dev, sizeof(*isp), GFP_KERNEL); + if (!isp) + return -ENOMEM; + + isp->client = client; + mutex_init(&isp->mutex); + + phy = &isp->phy; + phy->label = DRV_NAME; + phy->init = isp1301_phy_init; + phy->set_vbus = isp1301_phy_set_vbus; + phy->type = USB_PHY_TYPE_USB2; + + i2c_set_clientdata(client, isp); + usb_add_phy_dev(phy); + + isp1301_i2c_client = client; + + return 0; +} + +static int isp1301_remove(struct i2c_client *client) +{ + struct isp1301 *isp = i2c_get_clientdata(client); + + usb_remove_phy(&isp->phy); + isp1301_i2c_client = NULL; + + return 0; +} + +static struct i2c_driver isp1301_driver = { + .driver = { + .name = DRV_NAME, + }, + .probe = isp1301_probe, + .remove = isp1301_remove, + .id_table = isp1301_id, +}; + +module_i2c_driver(isp1301_driver); + +static int match(struct device *dev, void *data) +{ + struct device_node *node = (struct device_node *)data; + return (dev->of_node == node) && + (dev->driver == &isp1301_driver.driver); +} + +struct i2c_client *isp1301_get_client(struct device_node *node) +{ + if (node) { /* reference of ISP1301 I2C node via DT */ + struct device *dev = bus_find_device(&i2c_bus_type, NULL, + node, match); + if (!dev) + return NULL; + return to_i2c_client(dev); + } else { /* non-DT: only one ISP1301 chip supported */ + return isp1301_i2c_client; + } +} +EXPORT_SYMBOL_GPL(isp1301_get_client); + +MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>"); +MODULE_DESCRIPTION("NXP ISP1301 USB transceiver driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/otg/msm_otg.c b/drivers/usb/phy/phy-msm-usb.c index 749fbf41fb6f..749fbf41fb6f 100644 --- a/drivers/usb/otg/msm_otg.c +++ b/drivers/usb/phy/phy-msm-usb.c diff --git a/drivers/usb/phy/mv_u3d_phy.c b/drivers/usb/phy/phy-mv-u3d-usb.c index 9d8599122aa9..f7838a43347c 100644 --- a/drivers/usb/phy/mv_u3d_phy.c +++ b/drivers/usb/phy/phy-mv-u3d-usb.c @@ -15,7 +15,7 @@ #include <linux/usb/otg.h> #include <linux/platform_data/mv_usb.h> -#include "mv_u3d_phy.h" +#include "phy-mv-u3d-usb.h" /* * struct mv_u3d_phy - transceiver driver state @@ -313,7 +313,7 @@ err: return ret; } -static int __exit mv_u3d_phy_remove(struct platform_device *pdev) +static int mv_u3d_phy_remove(struct platform_device *pdev) { struct mv_u3d_phy *mv_u3d_phy = platform_get_drvdata(pdev); diff --git a/drivers/usb/phy/mv_u3d_phy.h b/drivers/usb/phy/phy-mv-u3d-usb.h index 2a658cb9a527..2a658cb9a527 100644 --- a/drivers/usb/phy/mv_u3d_phy.h +++ b/drivers/usb/phy/phy-mv-u3d-usb.h diff --git a/drivers/usb/otg/mv_otg.c b/drivers/usb/phy/phy-mv-usb.c index b6a9be31133b..c987bbe27851 100644 --- a/drivers/usb/otg/mv_otg.c +++ b/drivers/usb/phy/phy-mv-usb.c @@ -27,7 +27,7 @@ #include <linux/usb/hcd.h> #include <linux/platform_data/mv_usb.h> -#include "mv_otg.h" +#include "phy-mv-usb.h" #define DRIVER_DESC "Marvell USB OTG transceiver driver" #define DRIVER_VERSION "Jan 20, 2010" @@ -237,18 +237,12 @@ static void mv_otg_start_periphrals(struct mv_otg *mvotg, int on) static void otg_clock_enable(struct mv_otg *mvotg) { - unsigned int i; - - for (i = 0; i < mvotg->clknum; i++) - clk_prepare_enable(mvotg->clk[i]); + clk_prepare_enable(mvotg->clk); } static void otg_clock_disable(struct mv_otg *mvotg) { - unsigned int i; - - for (i = 0; i < mvotg->clknum; i++) - clk_disable_unprepare(mvotg->clk[i]); + clk_disable_unprepare(mvotg->clk); } static int mv_otg_enable_internal(struct mv_otg *mvotg) @@ -684,16 +678,14 @@ static int mv_otg_probe(struct platform_device *pdev) struct mv_otg *mvotg; struct usb_otg *otg; struct resource *r; - int retval = 0, clk_i, i; - size_t size; + int retval = 0, i; if (pdata == NULL) { dev_err(&pdev->dev, "failed to get platform data\n"); return -ENODEV; } - size = sizeof(*mvotg) + sizeof(struct clk *) * pdata->clknum; - mvotg = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); + mvotg = devm_kzalloc(&pdev->dev, sizeof(*mvotg), GFP_KERNEL); if (!mvotg) { dev_err(&pdev->dev, "failed to allocate memory!\n"); return -ENOMEM; @@ -708,15 +700,9 @@ static int mv_otg_probe(struct platform_device *pdev) mvotg->pdev = pdev; mvotg->pdata = pdata; - mvotg->clknum = pdata->clknum; - for (clk_i = 0; clk_i < mvotg->clknum; clk_i++) { - mvotg->clk[clk_i] = devm_clk_get(&pdev->dev, - pdata->clkname[clk_i]); - if (IS_ERR(mvotg->clk[clk_i])) { - retval = PTR_ERR(mvotg->clk[clk_i]); - return retval; - } - } + mvotg->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(mvotg->clk)) + return PTR_ERR(mvotg->clk); mvotg->qwork = create_singlethread_workqueue("mv_otg_queue"); if (!mvotg->qwork) { diff --git a/drivers/usb/otg/mv_otg.h b/drivers/usb/phy/phy-mv-usb.h index 8a9e351b36ba..551da6eb0ba8 100644 --- a/drivers/usb/otg/mv_otg.h +++ b/drivers/usb/phy/phy-mv-usb.h @@ -158,8 +158,7 @@ struct mv_otg { unsigned int active; unsigned int clock_gating; - unsigned int clknum; - struct clk *clk[0]; + struct clk *clk; }; #endif diff --git a/drivers/usb/otg/mxs-phy.c b/drivers/usb/phy/phy-mxs-usb.c index b0d9f119c749..9d4381e64d51 100644 --- a/drivers/usb/otg/mxs-phy.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -48,12 +48,12 @@ static void mxs_phy_hw_init(struct mxs_phy *mxs_phy) stmp_reset_block(base + HW_USBPHY_CTRL); /* Power up the PHY */ - writel_relaxed(0, base + HW_USBPHY_PWD); + writel(0, base + HW_USBPHY_PWD); /* enable FS/LS device */ - writel_relaxed(BM_USBPHY_CTRL_ENUTMILEVEL2 | - BM_USBPHY_CTRL_ENUTMILEVEL3, - base + HW_USBPHY_CTRL_SET); + writel(BM_USBPHY_CTRL_ENUTMILEVEL2 | + BM_USBPHY_CTRL_ENUTMILEVEL3, + base + HW_USBPHY_CTRL_SET); } static int mxs_phy_init(struct usb_phy *phy) @@ -70,8 +70,8 @@ static void mxs_phy_shutdown(struct usb_phy *phy) { struct mxs_phy *mxs_phy = to_mxs_phy(phy); - writel_relaxed(BM_USBPHY_CTRL_CLKGATE, - phy->io_priv + HW_USBPHY_CTRL_SET); + writel(BM_USBPHY_CTRL_CLKGATE, + phy->io_priv + HW_USBPHY_CTRL_SET); clk_disable_unprepare(mxs_phy->clk); } @@ -81,15 +81,15 @@ static int mxs_phy_suspend(struct usb_phy *x, int suspend) struct mxs_phy *mxs_phy = to_mxs_phy(x); if (suspend) { - writel_relaxed(0xffffffff, x->io_priv + HW_USBPHY_PWD); - writel_relaxed(BM_USBPHY_CTRL_CLKGATE, - x->io_priv + HW_USBPHY_CTRL_SET); + writel(0xffffffff, x->io_priv + HW_USBPHY_PWD); + writel(BM_USBPHY_CTRL_CLKGATE, + x->io_priv + HW_USBPHY_CTRL_SET); clk_disable_unprepare(mxs_phy->clk); } else { clk_prepare_enable(mxs_phy->clk); - writel_relaxed(BM_USBPHY_CTRL_CLKGATE, - x->io_priv + HW_USBPHY_CTRL_CLR); - writel_relaxed(0, x->io_priv + HW_USBPHY_PWD); + writel(BM_USBPHY_CTRL_CLKGATE, + x->io_priv + HW_USBPHY_CTRL_CLR); + writel(0, x->io_priv + HW_USBPHY_PWD); } return 0; @@ -102,8 +102,8 @@ static int mxs_phy_on_connect(struct usb_phy *phy, (speed == USB_SPEED_HIGH) ? "high" : "non-high"); if (speed == USB_SPEED_HIGH) - writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, - phy->io_priv + HW_USBPHY_CTRL_SET); + writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, + phy->io_priv + HW_USBPHY_CTRL_SET); return 0; } @@ -115,8 +115,8 @@ static int mxs_phy_on_disconnect(struct usb_phy *phy, (speed == USB_SPEED_HIGH) ? "high" : "non-high"); if (speed == USB_SPEED_HIGH) - writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, - phy->io_priv + HW_USBPHY_CTRL_CLR); + writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, + phy->io_priv + HW_USBPHY_CTRL_CLR); return 0; } @@ -127,6 +127,7 @@ static int mxs_phy_probe(struct platform_device *pdev) void __iomem *base; struct clk *clk; struct mxs_phy *mxs_phy; + int ret; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { @@ -166,11 +167,19 @@ static int mxs_phy_probe(struct platform_device *pdev) platform_set_drvdata(pdev, &mxs_phy->phy); + ret = usb_add_phy_dev(&mxs_phy->phy); + if (ret) + return ret; + return 0; } static int mxs_phy_remove(struct platform_device *pdev) { + struct mxs_phy *mxs_phy = platform_get_drvdata(pdev); + + usb_remove_phy(&mxs_phy->phy); + platform_set_drvdata(pdev, NULL); return 0; diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/phy/phy-nop.c index a3ce24b94a73..2b10cc969bbb 100644 --- a/drivers/usb/otg/nop-usb-xceiv.c +++ b/drivers/usb/phy/phy-nop.c @@ -32,10 +32,16 @@ #include <linux/usb/otg.h> #include <linux/usb/nop-usb-xceiv.h> #include <linux/slab.h> +#include <linux/clk.h> +#include <linux/regulator/consumer.h> +#include <linux/of.h> struct nop_usb_xceiv { - struct usb_phy phy; - struct device *dev; + struct usb_phy phy; + struct device *dev; + struct clk *clk; + struct regulator *vcc; + struct regulator *reset; }; static struct platform_device *pd; @@ -64,6 +70,46 @@ static int nop_set_suspend(struct usb_phy *x, int suspend) return 0; } +static int nop_init(struct usb_phy *phy) +{ + struct nop_usb_xceiv *nop = dev_get_drvdata(phy->dev); + + if (!IS_ERR(nop->vcc)) { + if (regulator_enable(nop->vcc)) + dev_err(phy->dev, "Failed to enable power\n"); + } + + if (!IS_ERR(nop->clk)) + clk_enable(nop->clk); + + if (!IS_ERR(nop->reset)) { + /* De-assert RESET */ + if (regulator_enable(nop->reset)) + dev_err(phy->dev, "Failed to de-assert reset\n"); + } + + return 0; +} + +static void nop_shutdown(struct usb_phy *phy) +{ + struct nop_usb_xceiv *nop = dev_get_drvdata(phy->dev); + + if (!IS_ERR(nop->reset)) { + /* Assert RESET */ + if (regulator_disable(nop->reset)) + dev_err(phy->dev, "Failed to assert reset\n"); + } + + if (!IS_ERR(nop->clk)) + clk_disable(nop->clk); + + if (!IS_ERR(nop->vcc)) { + if (regulator_disable(nop->vcc)) + dev_err(phy->dev, "Failed to disable power\n"); + } +} + static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) { if (!otg) @@ -95,39 +141,96 @@ static int nop_set_host(struct usb_otg *otg, struct usb_bus *host) static int nop_usb_xceiv_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; struct nop_usb_xceiv_platform_data *pdata = pdev->dev.platform_data; struct nop_usb_xceiv *nop; enum usb_phy_type type = USB_PHY_TYPE_USB2; int err; + u32 clk_rate = 0; + bool needs_vcc = false; + bool needs_reset = false; - nop = kzalloc(sizeof *nop, GFP_KERNEL); + nop = devm_kzalloc(&pdev->dev, sizeof(*nop), GFP_KERNEL); if (!nop) return -ENOMEM; - nop->phy.otg = kzalloc(sizeof *nop->phy.otg, GFP_KERNEL); - if (!nop->phy.otg) { - kfree(nop); + nop->phy.otg = devm_kzalloc(&pdev->dev, sizeof(*nop->phy.otg), + GFP_KERNEL); + if (!nop->phy.otg) return -ENOMEM; - } - if (pdata) + if (dev->of_node) { + struct device_node *node = dev->of_node; + + if (of_property_read_u32(node, "clock-frequency", &clk_rate)) + clk_rate = 0; + + needs_vcc = of_property_read_bool(node, "vcc-supply"); + needs_reset = of_property_read_bool(node, "reset-supply"); + + } else if (pdata) { type = pdata->type; + clk_rate = pdata->clk_rate; + needs_vcc = pdata->needs_vcc; + needs_reset = pdata->needs_reset; + } + + nop->clk = devm_clk_get(&pdev->dev, "main_clk"); + if (IS_ERR(nop->clk)) { + dev_dbg(&pdev->dev, "Can't get phy clock: %ld\n", + PTR_ERR(nop->clk)); + } + + if (!IS_ERR(nop->clk) && clk_rate) { + err = clk_set_rate(nop->clk, clk_rate); + if (err) { + dev_err(&pdev->dev, "Error setting clock rate\n"); + return err; + } + } + + if (!IS_ERR(nop->clk)) { + err = clk_prepare(nop->clk); + if (err) { + dev_err(&pdev->dev, "Error preparing clock\n"); + return err; + } + } + + nop->vcc = devm_regulator_get(&pdev->dev, "vcc"); + if (IS_ERR(nop->vcc)) { + dev_dbg(&pdev->dev, "Error getting vcc regulator: %ld\n", + PTR_ERR(nop->vcc)); + if (needs_vcc) + return -EPROBE_DEFER; + } + + nop->reset = devm_regulator_get(&pdev->dev, "reset"); + if (IS_ERR(nop->reset)) { + dev_dbg(&pdev->dev, "Error getting reset regulator: %ld\n", + PTR_ERR(nop->reset)); + if (needs_reset) + return -EPROBE_DEFER; + } nop->dev = &pdev->dev; nop->phy.dev = nop->dev; nop->phy.label = "nop-xceiv"; nop->phy.set_suspend = nop_set_suspend; + nop->phy.init = nop_init; + nop->phy.shutdown = nop_shutdown; nop->phy.state = OTG_STATE_UNDEFINED; + nop->phy.type = type; nop->phy.otg->phy = &nop->phy; nop->phy.otg->set_host = nop_set_host; nop->phy.otg->set_peripheral = nop_set_peripheral; - err = usb_add_phy(&nop->phy, type); + err = usb_add_phy_dev(&nop->phy); if (err) { dev_err(&pdev->dev, "can't register transceiver, err: %d\n", err); - goto exit; + goto err_add; } platform_set_drvdata(pdev, nop); @@ -135,9 +238,10 @@ static int nop_usb_xceiv_probe(struct platform_device *pdev) ATOMIC_INIT_NOTIFIER_HEAD(&nop->phy.notifier); return 0; -exit: - kfree(nop->phy.otg); - kfree(nop); + +err_add: + if (!IS_ERR(nop->clk)) + clk_unprepare(nop->clk); return err; } @@ -145,21 +249,30 @@ static int nop_usb_xceiv_remove(struct platform_device *pdev) { struct nop_usb_xceiv *nop = platform_get_drvdata(pdev); + if (!IS_ERR(nop->clk)) + clk_unprepare(nop->clk); + usb_remove_phy(&nop->phy); platform_set_drvdata(pdev, NULL); - kfree(nop->phy.otg); - kfree(nop); return 0; } +static const struct of_device_id nop_xceiv_dt_ids[] = { + { .compatible = "usb-nop-xceiv" }, + { } +}; + +MODULE_DEVICE_TABLE(of, nop_xceiv_dt_ids); + static struct platform_driver nop_usb_xceiv_driver = { .probe = nop_usb_xceiv_probe, .remove = nop_usb_xceiv_remove, .driver = { .name = "nop_usb_xceiv", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(nop_xceiv_dt_ids), }, }; diff --git a/drivers/usb/phy/omap-control-usb.c b/drivers/usb/phy/phy-omap-control.c index 1419ceda9759..1419ceda9759 100644 --- a/drivers/usb/phy/omap-control-usb.c +++ b/drivers/usb/phy/phy-omap-control.c diff --git a/drivers/usb/phy/omap-usb2.c b/drivers/usb/phy/phy-omap-usb2.c index 844ab68f08d0..844ab68f08d0 100644 --- a/drivers/usb/phy/omap-usb2.c +++ b/drivers/usb/phy/phy-omap-usb2.c diff --git a/drivers/usb/phy/omap-usb3.c b/drivers/usb/phy/phy-omap-usb3.c index a6e60b1e102e..a6e60b1e102e 100644 --- a/drivers/usb/phy/omap-usb3.c +++ b/drivers/usb/phy/phy-omap-usb3.c diff --git a/drivers/usb/phy/rcar-phy.c b/drivers/usb/phy/phy-rcar-usb.c index a35681b0c501..a35681b0c501 100644 --- a/drivers/usb/phy/rcar-phy.c +++ b/drivers/usb/phy/phy-rcar-usb.c diff --git a/drivers/usb/phy/phy-samsung-usb.c b/drivers/usb/phy/phy-samsung-usb.c new file mode 100644 index 000000000000..7b118ee5f5e4 --- /dev/null +++ b/drivers/usb/phy/phy-samsung-usb.c @@ -0,0 +1,236 @@ +/* linux/drivers/usb/phy/phy-samsung-usb.c + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Praveen Paneri <p.paneri@samsung.com> + * + * Samsung USB-PHY helper driver with common function calls; + * interacts with Samsung USB 2.0 PHY controller driver and later + * with Samsung USB 3.0 PHY driver. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/usb/samsung_usb_phy.h> + +#include "phy-samsung-usb.h" + +int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy) +{ + struct device_node *usbphy_sys; + + /* Getting node for system controller interface for usb-phy */ + usbphy_sys = of_get_child_by_name(sphy->dev->of_node, "usbphy-sys"); + if (!usbphy_sys) { + dev_err(sphy->dev, "No sys-controller interface for usb-phy\n"); + return -ENODEV; + } + + sphy->pmuregs = of_iomap(usbphy_sys, 0); + + if (sphy->pmuregs == NULL) { + dev_err(sphy->dev, "Can't get usb-phy pmu control register\n"); + goto err0; + } + + sphy->sysreg = of_iomap(usbphy_sys, 1); + + /* + * Not returning error code here, since this situation is not fatal. + * Few SoCs may not have this switch available + */ + if (sphy->sysreg == NULL) + dev_warn(sphy->dev, "Can't get usb-phy sysreg cfg register\n"); + + of_node_put(usbphy_sys); + + return 0; + +err0: + of_node_put(usbphy_sys); + return -ENXIO; +} +EXPORT_SYMBOL_GPL(samsung_usbphy_parse_dt); + +/* + * Set isolation here for phy. + * Here 'on = true' would mean USB PHY block is isolated, hence + * de-activated and vice-versa. + */ +void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on) +{ + void __iomem *reg = NULL; + u32 reg_val; + u32 en_mask = 0; + + if (!sphy->pmuregs) { + dev_warn(sphy->dev, "Can't set pmu isolation\n"); + return; + } + + switch (sphy->drv_data->cpu_type) { + case TYPE_S3C64XX: + /* + * Do nothing: We will add here once S3C64xx goes for DT support + */ + break; + case TYPE_EXYNOS4210: + /* + * Fall through since exynos4210 and exynos5250 have similar + * register architecture: two separate registers for host and + * device phy control with enable bit at position 0. + */ + case TYPE_EXYNOS5250: + if (sphy->phy_type == USB_PHY_TYPE_DEVICE) { + reg = sphy->pmuregs + + sphy->drv_data->devphy_reg_offset; + en_mask = sphy->drv_data->devphy_en_mask; + } else if (sphy->phy_type == USB_PHY_TYPE_HOST) { + reg = sphy->pmuregs + + sphy->drv_data->hostphy_reg_offset; + en_mask = sphy->drv_data->hostphy_en_mask; + } + break; + default: + dev_err(sphy->dev, "Invalid SoC type\n"); + return; + } + + reg_val = readl(reg); + + if (on) + reg_val &= ~en_mask; + else + reg_val |= en_mask; + + writel(reg_val, reg); +} +EXPORT_SYMBOL_GPL(samsung_usbphy_set_isolation); + +/* + * Configure the mode of working of usb-phy here: HOST/DEVICE. + */ +void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy) +{ + u32 reg; + + if (!sphy->sysreg) { + dev_warn(sphy->dev, "Can't configure specified phy mode\n"); + return; + } + + reg = readl(sphy->sysreg); + + if (sphy->phy_type == USB_PHY_TYPE_DEVICE) + reg &= ~EXYNOS_USB20PHY_CFG_HOST_LINK; + else if (sphy->phy_type == USB_PHY_TYPE_HOST) + reg |= EXYNOS_USB20PHY_CFG_HOST_LINK; + + writel(reg, sphy->sysreg); +} +EXPORT_SYMBOL_GPL(samsung_usbphy_cfg_sel); + +/* + * PHYs are different for USB Device and USB Host. + * This make sure that correct PHY type is selected before + * any operation on PHY. + */ +int samsung_usbphy_set_type(struct usb_phy *phy, + enum samsung_usb_phy_type phy_type) +{ + struct samsung_usbphy *sphy = phy_to_sphy(phy); + + sphy->phy_type = phy_type; + + return 0; +} +EXPORT_SYMBOL_GPL(samsung_usbphy_set_type); + +/* + * Returns reference clock frequency selection value + */ +int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy) +{ + struct clk *ref_clk; + int refclk_freq = 0; + + /* + * In exynos5250 USB host and device PHY use + * external crystal clock XXTI + */ + if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) + ref_clk = devm_clk_get(sphy->dev, "ext_xtal"); + else + ref_clk = devm_clk_get(sphy->dev, "xusbxti"); + if (IS_ERR(ref_clk)) { + dev_err(sphy->dev, "Failed to get reference clock\n"); + return PTR_ERR(ref_clk); + } + + if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) { + /* set clock frequency for PLL */ + switch (clk_get_rate(ref_clk)) { + case 9600 * KHZ: + refclk_freq = FSEL_CLKSEL_9600K; + break; + case 10 * MHZ: + refclk_freq = FSEL_CLKSEL_10M; + break; + case 12 * MHZ: + refclk_freq = FSEL_CLKSEL_12M; + break; + case 19200 * KHZ: + refclk_freq = FSEL_CLKSEL_19200K; + break; + case 20 * MHZ: + refclk_freq = FSEL_CLKSEL_20M; + break; + case 50 * MHZ: + refclk_freq = FSEL_CLKSEL_50M; + break; + case 24 * MHZ: + default: + /* default reference clock */ + refclk_freq = FSEL_CLKSEL_24M; + break; + } + } else { + switch (clk_get_rate(ref_clk)) { + case 12 * MHZ: + refclk_freq = PHYCLK_CLKSEL_12M; + break; + case 24 * MHZ: + refclk_freq = PHYCLK_CLKSEL_24M; + break; + case 48 * MHZ: + refclk_freq = PHYCLK_CLKSEL_48M; + break; + default: + if (sphy->drv_data->cpu_type == TYPE_S3C64XX) + refclk_freq = PHYCLK_CLKSEL_48M; + else + refclk_freq = PHYCLK_CLKSEL_24M; + break; + } + } + clk_put(ref_clk); + + return refclk_freq; +} +EXPORT_SYMBOL_GPL(samsung_usbphy_get_refclk_freq); diff --git a/drivers/usb/phy/phy-samsung-usb.h b/drivers/usb/phy/phy-samsung-usb.h new file mode 100644 index 000000000000..70a9cae5e37f --- /dev/null +++ b/drivers/usb/phy/phy-samsung-usb.h @@ -0,0 +1,327 @@ +/* linux/drivers/usb/phy/phy-samsung-usb.h + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung USB-PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and + * OHCI-EXYNOS controllers. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/usb/phy.h> + +/* Register definitions */ + +#define SAMSUNG_PHYPWR (0x00) + +#define PHYPWR_NORMAL_MASK (0x19 << 0) +#define PHYPWR_OTG_DISABLE (0x1 << 4) +#define PHYPWR_ANALOG_POWERDOWN (0x1 << 3) +#define PHYPWR_FORCE_SUSPEND (0x1 << 1) +/* For Exynos4 */ +#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0) +#define PHYPWR_SLEEP_PHY0 (0x1 << 5) + +#define SAMSUNG_PHYCLK (0x04) + +#define PHYCLK_MODE_USB11 (0x1 << 6) +#define PHYCLK_EXT_OSC (0x1 << 5) +#define PHYCLK_COMMON_ON_N (0x1 << 4) +#define PHYCLK_ID_PULL (0x1 << 2) +#define PHYCLK_CLKSEL_MASK (0x3 << 0) +#define PHYCLK_CLKSEL_48M (0x0 << 0) +#define PHYCLK_CLKSEL_12M (0x2 << 0) +#define PHYCLK_CLKSEL_24M (0x3 << 0) + +#define SAMSUNG_RSTCON (0x08) + +#define RSTCON_PHYLINK_SWRST (0x1 << 2) +#define RSTCON_HLINK_SWRST (0x1 << 1) +#define RSTCON_SWRST (0x1 << 0) + +/* EXYNOS5 */ +#define EXYNOS5_PHY_HOST_CTRL0 (0x00) + +#define HOST_CTRL0_PHYSWRSTALL (0x1 << 31) + +#define HOST_CTRL0_REFCLKSEL_MASK (0x3 << 19) +#define HOST_CTRL0_REFCLKSEL_XTAL (0x0 << 19) +#define HOST_CTRL0_REFCLKSEL_EXTL (0x1 << 19) +#define HOST_CTRL0_REFCLKSEL_CLKCORE (0x2 << 19) + +#define HOST_CTRL0_FSEL_MASK (0x7 << 16) +#define HOST_CTRL0_FSEL(_x) ((_x) << 16) + +#define FSEL_CLKSEL_50M (0x7) +#define FSEL_CLKSEL_24M (0x5) +#define FSEL_CLKSEL_20M (0x4) +#define FSEL_CLKSEL_19200K (0x3) +#define FSEL_CLKSEL_12M (0x2) +#define FSEL_CLKSEL_10M (0x1) +#define FSEL_CLKSEL_9600K (0x0) + +#define HOST_CTRL0_TESTBURNIN (0x1 << 11) +#define HOST_CTRL0_RETENABLE (0x1 << 10) +#define HOST_CTRL0_COMMONON_N (0x1 << 9) +#define HOST_CTRL0_SIDDQ (0x1 << 6) +#define HOST_CTRL0_FORCESLEEP (0x1 << 5) +#define HOST_CTRL0_FORCESUSPEND (0x1 << 4) +#define HOST_CTRL0_WORDINTERFACE (0x1 << 3) +#define HOST_CTRL0_UTMISWRST (0x1 << 2) +#define HOST_CTRL0_LINKSWRST (0x1 << 1) +#define HOST_CTRL0_PHYSWRST (0x1 << 0) + +#define EXYNOS5_PHY_HOST_TUNE0 (0x04) + +#define EXYNOS5_PHY_HSIC_CTRL1 (0x10) + +#define EXYNOS5_PHY_HSIC_TUNE1 (0x14) + +#define EXYNOS5_PHY_HSIC_CTRL2 (0x20) + +#define EXYNOS5_PHY_HSIC_TUNE2 (0x24) + +#define HSIC_CTRL_REFCLKSEL_MASK (0x3 << 23) +#define HSIC_CTRL_REFCLKSEL (0x2 << 23) + +#define HSIC_CTRL_REFCLKDIV_MASK (0x7f << 16) +#define HSIC_CTRL_REFCLKDIV(_x) ((_x) << 16) +#define HSIC_CTRL_REFCLKDIV_12 (0x24 << 16) +#define HSIC_CTRL_REFCLKDIV_15 (0x1c << 16) +#define HSIC_CTRL_REFCLKDIV_16 (0x1a << 16) +#define HSIC_CTRL_REFCLKDIV_19_2 (0x15 << 16) +#define HSIC_CTRL_REFCLKDIV_20 (0x14 << 16) + +#define HSIC_CTRL_SIDDQ (0x1 << 6) +#define HSIC_CTRL_FORCESLEEP (0x1 << 5) +#define HSIC_CTRL_FORCESUSPEND (0x1 << 4) +#define HSIC_CTRL_WORDINTERFACE (0x1 << 3) +#define HSIC_CTRL_UTMISWRST (0x1 << 2) +#define HSIC_CTRL_PHYSWRST (0x1 << 0) + +#define EXYNOS5_PHY_HOST_EHCICTRL (0x30) + +#define HOST_EHCICTRL_ENAINCRXALIGN (0x1 << 29) +#define HOST_EHCICTRL_ENAINCR4 (0x1 << 28) +#define HOST_EHCICTRL_ENAINCR8 (0x1 << 27) +#define HOST_EHCICTRL_ENAINCR16 (0x1 << 26) + +#define EXYNOS5_PHY_HOST_OHCICTRL (0x34) + +#define HOST_OHCICTRL_SUSPLGCY (0x1 << 3) +#define HOST_OHCICTRL_APPSTARTCLK (0x1 << 2) +#define HOST_OHCICTRL_CNTSEL (0x1 << 1) +#define HOST_OHCICTRL_CLKCKTRST (0x1 << 0) + +#define EXYNOS5_PHY_OTG_SYS (0x38) + +#define OTG_SYS_PHYLINK_SWRESET (0x1 << 14) +#define OTG_SYS_LINKSWRST_UOTG (0x1 << 13) +#define OTG_SYS_PHY0_SWRST (0x1 << 12) + +#define OTG_SYS_REFCLKSEL_MASK (0x3 << 9) +#define OTG_SYS_REFCLKSEL_XTAL (0x0 << 9) +#define OTG_SYS_REFCLKSEL_EXTL (0x1 << 9) +#define OTG_SYS_REFCLKSEL_CLKCORE (0x2 << 9) + +#define OTG_SYS_IDPULLUP_UOTG (0x1 << 8) +#define OTG_SYS_COMMON_ON (0x1 << 7) + +#define OTG_SYS_FSEL_MASK (0x7 << 4) +#define OTG_SYS_FSEL(_x) ((_x) << 4) + +#define OTG_SYS_FORCESLEEP (0x1 << 3) +#define OTG_SYS_OTGDISABLE (0x1 << 2) +#define OTG_SYS_SIDDQ_UOTG (0x1 << 1) +#define OTG_SYS_FORCESUSPEND (0x1 << 0) + +#define EXYNOS5_PHY_OTG_TUNE (0x40) + +/* EXYNOS5: USB 3.0 DRD */ +#define EXYNOS5_DRD_LINKSYSTEM (0x04) + +#define LINKSYSTEM_FLADJ_MASK (0x3f << 1) +#define LINKSYSTEM_FLADJ(_x) ((_x) << 1) +#define LINKSYSTEM_XHCI_VERSION_CONTROL (0x1 << 27) + +#define EXYNOS5_DRD_PHYUTMI (0x08) + +#define PHYUTMI_OTGDISABLE (0x1 << 6) +#define PHYUTMI_FORCESUSPEND (0x1 << 1) +#define PHYUTMI_FORCESLEEP (0x1 << 0) + +#define EXYNOS5_DRD_PHYPIPE (0x0c) + +#define EXYNOS5_DRD_PHYCLKRST (0x10) + +#define PHYCLKRST_SSC_REFCLKSEL_MASK (0xff << 23) +#define PHYCLKRST_SSC_REFCLKSEL(_x) ((_x) << 23) + +#define PHYCLKRST_SSC_RANGE_MASK (0x03 << 21) +#define PHYCLKRST_SSC_RANGE(_x) ((_x) << 21) + +#define PHYCLKRST_SSC_EN (0x1 << 20) +#define PHYCLKRST_REF_SSP_EN (0x1 << 19) +#define PHYCLKRST_REF_CLKDIV2 (0x1 << 18) + +#define PHYCLKRST_MPLL_MULTIPLIER_MASK (0x7f << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF (0x19 << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF (0x02 << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF (0x68 << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF (0x7d << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF (0x02 << 11) + +#define PHYCLKRST_FSEL_MASK (0x3f << 5) +#define PHYCLKRST_FSEL(_x) ((_x) << 5) +#define PHYCLKRST_FSEL_PAD_100MHZ (0x27 << 5) +#define PHYCLKRST_FSEL_PAD_24MHZ (0x2a << 5) +#define PHYCLKRST_FSEL_PAD_20MHZ (0x31 << 5) +#define PHYCLKRST_FSEL_PAD_19_2MHZ (0x38 << 5) + +#define PHYCLKRST_RETENABLEN (0x1 << 4) + +#define PHYCLKRST_REFCLKSEL_MASK (0x03 << 2) +#define PHYCLKRST_REFCLKSEL_PAD_REFCLK (0x2 << 2) +#define PHYCLKRST_REFCLKSEL_EXT_REFCLK (0x3 << 2) + +#define PHYCLKRST_PORTRESET (0x1 << 1) +#define PHYCLKRST_COMMONONN (0x1 << 0) + +#define EXYNOS5_DRD_PHYREG0 (0x14) +#define EXYNOS5_DRD_PHYREG1 (0x18) + +#define EXYNOS5_DRD_PHYPARAM0 (0x1c) + +#define PHYPARAM0_REF_USE_PAD (0x1 << 31) +#define PHYPARAM0_REF_LOSLEVEL_MASK (0x1f << 26) +#define PHYPARAM0_REF_LOSLEVEL (0x9 << 26) + +#define EXYNOS5_DRD_PHYPARAM1 (0x20) + +#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0) +#define PHYPARAM1_PCS_TXDEEMPH (0x1c) + +#define EXYNOS5_DRD_PHYTERM (0x24) + +#define EXYNOS5_DRD_PHYTEST (0x28) + +#define PHYTEST_POWERDOWN_SSP (0x1 << 3) +#define PHYTEST_POWERDOWN_HSP (0x1 << 2) + +#define EXYNOS5_DRD_PHYADP (0x2c) + +#define EXYNOS5_DRD_PHYBATCHG (0x30) + +#define PHYBATCHG_UTMI_CLKSEL (0x1 << 2) + +#define EXYNOS5_DRD_PHYRESUME (0x34) +#define EXYNOS5_DRD_LINKPORT (0x44) + +#ifndef MHZ +#define MHZ (1000*1000) +#endif + +#ifndef KHZ +#define KHZ (1000) +#endif + +#define EXYNOS_USBHOST_PHY_CTRL_OFFSET (0x4) +#define S3C64XX_USBPHY_ENABLE (0x1 << 16) +#define EXYNOS_USBPHY_ENABLE (0x1 << 0) +#define EXYNOS_USB20PHY_CFG_HOST_LINK (0x1 << 0) + +enum samsung_cpu_type { + TYPE_S3C64XX, + TYPE_EXYNOS4210, + TYPE_EXYNOS5250, +}; + +/* + * struct samsung_usbphy_drvdata - driver data for various SoC variants + * @cpu_type: machine identifier + * @devphy_en_mask: device phy enable mask for PHY CONTROL register + * @hostphy_en_mask: host phy enable mask for PHY CONTROL register + * @devphy_reg_offset: offset to DEVICE PHY CONTROL register from + * mapped address of system controller. + * @hostphy_reg_offset: offset to HOST PHY CONTROL register from + * mapped address of system controller. + * + * Here we have a separate mask for device type phy. + * Having different masks for host and device type phy helps + * in setting independent masks in case of SoCs like S5PV210, + * in which PHY0 and PHY1 enable bits belong to same register + * placed at position 0 and 1 respectively. + * Although for newer SoCs like exynos these bits belong to + * different registers altogether placed at position 0. + */ +struct samsung_usbphy_drvdata { + int cpu_type; + int devphy_en_mask; + int hostphy_en_mask; + u32 devphy_reg_offset; + u32 hostphy_reg_offset; +}; + +/* + * struct samsung_usbphy - transceiver driver state + * @phy: transceiver structure + * @plat: platform data + * @dev: The parent device supplied to the probe function + * @clk: usb phy clock + * @regs: usb phy controller registers memory base + * @pmuregs: USB device PHY_CONTROL register memory base + * @sysreg: USB2.0 PHY_CFG register memory base + * @ref_clk_freq: reference clock frequency selection + * @drv_data: driver data available for different SoCs + * @phy_type: Samsung SoCs specific phy types: #HOST + * #DEVICE + * @phy_usage: usage count for phy + * @lock: lock for phy operations + */ +struct samsung_usbphy { + struct usb_phy phy; + struct samsung_usbphy_data *plat; + struct device *dev; + struct clk *clk; + void __iomem *regs; + void __iomem *pmuregs; + void __iomem *sysreg; + int ref_clk_freq; + const struct samsung_usbphy_drvdata *drv_data; + enum samsung_usb_phy_type phy_type; + atomic_t phy_usage; + spinlock_t lock; +}; + +#define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy) + +static const struct of_device_id samsung_usbphy_dt_match[]; + +static inline const struct samsung_usbphy_drvdata +*samsung_usbphy_get_driver_data(struct platform_device *pdev) +{ + if (pdev->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(samsung_usbphy_dt_match, + pdev->dev.of_node); + return match->data; + } + + return (struct samsung_usbphy_drvdata *) + platform_get_device_id(pdev)->driver_data; +} + +extern int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy); +extern void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on); +extern void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy); +extern int samsung_usbphy_set_type(struct usb_phy *phy, + enum samsung_usb_phy_type phy_type); +extern int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy); diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c new file mode 100644 index 000000000000..45ffe036dacc --- /dev/null +++ b/drivers/usb/phy/phy-samsung-usb2.c @@ -0,0 +1,509 @@ +/* linux/drivers/usb/phy/phy-samsung-usb2.c + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Praveen Paneri <p.paneri@samsung.com> + * + * Samsung USB2.0 PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and + * OHCI-EXYNOS controllers. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/usb/otg.h> +#include <linux/usb/samsung_usb_phy.h> +#include <linux/platform_data/samsung-usbphy.h> + +#include "phy-samsung-usb.h" + +static int samsung_usbphy_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + if (!otg) + return -ENODEV; + + if (!otg->host) + otg->host = host; + + return 0; +} + +static bool exynos5_phyhost_is_on(void __iomem *regs) +{ + u32 reg; + + reg = readl(regs + EXYNOS5_PHY_HOST_CTRL0); + + return !(reg & HOST_CTRL0_SIDDQ); +} + +static void samsung_exynos5_usb2phy_enable(struct samsung_usbphy *sphy) +{ + void __iomem *regs = sphy->regs; + u32 phyclk = sphy->ref_clk_freq; + u32 phyhost; + u32 phyotg; + u32 phyhsic; + u32 ehcictrl; + u32 ohcictrl; + + /* + * phy_usage helps in keeping usage count for phy + * so that the first consumer enabling the phy is also + * the last consumer to disable it. + */ + + atomic_inc(&sphy->phy_usage); + + if (exynos5_phyhost_is_on(regs)) { + dev_info(sphy->dev, "Already power on PHY\n"); + return; + } + + /* Host configuration */ + phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0); + + /* phy reference clock configuration */ + phyhost &= ~HOST_CTRL0_FSEL_MASK; + phyhost |= HOST_CTRL0_FSEL(phyclk); + + /* host phy reset */ + phyhost &= ~(HOST_CTRL0_PHYSWRST | + HOST_CTRL0_PHYSWRSTALL | + HOST_CTRL0_SIDDQ | + /* Enable normal mode of operation */ + HOST_CTRL0_FORCESUSPEND | + HOST_CTRL0_FORCESLEEP); + + /* Link reset */ + phyhost |= (HOST_CTRL0_LINKSWRST | + HOST_CTRL0_UTMISWRST | + /* COMMON Block configuration during suspend */ + HOST_CTRL0_COMMONON_N); + writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); + udelay(10); + phyhost &= ~(HOST_CTRL0_LINKSWRST | + HOST_CTRL0_UTMISWRST); + writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); + + /* OTG configuration */ + phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS); + + /* phy reference clock configuration */ + phyotg &= ~OTG_SYS_FSEL_MASK; + phyotg |= OTG_SYS_FSEL(phyclk); + + /* Enable normal mode of operation */ + phyotg &= ~(OTG_SYS_FORCESUSPEND | + OTG_SYS_SIDDQ_UOTG | + OTG_SYS_FORCESLEEP | + OTG_SYS_REFCLKSEL_MASK | + /* COMMON Block configuration during suspend */ + OTG_SYS_COMMON_ON); + + /* OTG phy & link reset */ + phyotg |= (OTG_SYS_PHY0_SWRST | + OTG_SYS_LINKSWRST_UOTG | + OTG_SYS_PHYLINK_SWRESET | + OTG_SYS_OTGDISABLE | + /* Set phy refclk */ + OTG_SYS_REFCLKSEL_CLKCORE); + + writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); + udelay(10); + phyotg &= ~(OTG_SYS_PHY0_SWRST | + OTG_SYS_LINKSWRST_UOTG | + OTG_SYS_PHYLINK_SWRESET); + writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); + + /* HSIC phy configuration */ + phyhsic = (HSIC_CTRL_REFCLKDIV_12 | + HSIC_CTRL_REFCLKSEL | + HSIC_CTRL_PHYSWRST); + writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); + writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); + udelay(10); + phyhsic &= ~HSIC_CTRL_PHYSWRST; + writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); + writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); + + udelay(80); + + /* enable EHCI DMA burst */ + ehcictrl = readl(regs + EXYNOS5_PHY_HOST_EHCICTRL); + ehcictrl |= (HOST_EHCICTRL_ENAINCRXALIGN | + HOST_EHCICTRL_ENAINCR4 | + HOST_EHCICTRL_ENAINCR8 | + HOST_EHCICTRL_ENAINCR16); + writel(ehcictrl, regs + EXYNOS5_PHY_HOST_EHCICTRL); + + /* set ohci_suspend_on_n */ + ohcictrl = readl(regs + EXYNOS5_PHY_HOST_OHCICTRL); + ohcictrl |= HOST_OHCICTRL_SUSPLGCY; + writel(ohcictrl, regs + EXYNOS5_PHY_HOST_OHCICTRL); +} + +static void samsung_usb2phy_enable(struct samsung_usbphy *sphy) +{ + void __iomem *regs = sphy->regs; + u32 phypwr; + u32 phyclk; + u32 rstcon; + + /* set clock frequency for PLL */ + phyclk = sphy->ref_clk_freq; + phypwr = readl(regs + SAMSUNG_PHYPWR); + rstcon = readl(regs + SAMSUNG_RSTCON); + + switch (sphy->drv_data->cpu_type) { + case TYPE_S3C64XX: + phyclk &= ~PHYCLK_COMMON_ON_N; + phypwr &= ~PHYPWR_NORMAL_MASK; + rstcon |= RSTCON_SWRST; + break; + case TYPE_EXYNOS4210: + phypwr &= ~PHYPWR_NORMAL_MASK_PHY0; + rstcon |= RSTCON_SWRST; + default: + break; + } + + writel(phyclk, regs + SAMSUNG_PHYCLK); + /* Configure PHY0 for normal operation*/ + writel(phypwr, regs + SAMSUNG_PHYPWR); + /* reset all ports of PHY and Link */ + writel(rstcon, regs + SAMSUNG_RSTCON); + udelay(10); + rstcon &= ~RSTCON_SWRST; + writel(rstcon, regs + SAMSUNG_RSTCON); +} + +static void samsung_exynos5_usb2phy_disable(struct samsung_usbphy *sphy) +{ + void __iomem *regs = sphy->regs; + u32 phyhost; + u32 phyotg; + u32 phyhsic; + + if (atomic_dec_return(&sphy->phy_usage) > 0) { + dev_info(sphy->dev, "still being used\n"); + return; + } + + phyhsic = (HSIC_CTRL_REFCLKDIV_12 | + HSIC_CTRL_REFCLKSEL | + HSIC_CTRL_SIDDQ | + HSIC_CTRL_FORCESLEEP | + HSIC_CTRL_FORCESUSPEND); + writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); + writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); + + phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0); + phyhost |= (HOST_CTRL0_SIDDQ | + HOST_CTRL0_FORCESUSPEND | + HOST_CTRL0_FORCESLEEP | + HOST_CTRL0_PHYSWRST | + HOST_CTRL0_PHYSWRSTALL); + writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); + + phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS); + phyotg |= (OTG_SYS_FORCESUSPEND | + OTG_SYS_SIDDQ_UOTG | + OTG_SYS_FORCESLEEP); + writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); +} + +static void samsung_usb2phy_disable(struct samsung_usbphy *sphy) +{ + void __iomem *regs = sphy->regs; + u32 phypwr; + + phypwr = readl(regs + SAMSUNG_PHYPWR); + + switch (sphy->drv_data->cpu_type) { + case TYPE_S3C64XX: + phypwr |= PHYPWR_NORMAL_MASK; + break; + case TYPE_EXYNOS4210: + phypwr |= PHYPWR_NORMAL_MASK_PHY0; + default: + break; + } + + /* Disable analog and otg block power */ + writel(phypwr, regs + SAMSUNG_PHYPWR); +} + +/* + * The function passed to the usb driver for phy initialization + */ +static int samsung_usb2phy_init(struct usb_phy *phy) +{ + struct samsung_usbphy *sphy; + struct usb_bus *host = NULL; + unsigned long flags; + int ret = 0; + + sphy = phy_to_sphy(phy); + + host = phy->otg->host; + + /* Enable the phy clock */ + ret = clk_prepare_enable(sphy->clk); + if (ret) { + dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); + return ret; + } + + spin_lock_irqsave(&sphy->lock, flags); + + if (host) { + /* setting default phy-type for USB 2.0 */ + if (!strstr(dev_name(host->controller), "ehci") || + !strstr(dev_name(host->controller), "ohci")) + samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST); + } else { + samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE); + } + + /* Disable phy isolation */ + if (sphy->plat && sphy->plat->pmu_isolation) + sphy->plat->pmu_isolation(false); + else + samsung_usbphy_set_isolation(sphy, false); + + /* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */ + samsung_usbphy_cfg_sel(sphy); + + /* Initialize usb phy registers */ + if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) + samsung_exynos5_usb2phy_enable(sphy); + else + samsung_usb2phy_enable(sphy); + + spin_unlock_irqrestore(&sphy->lock, flags); + + /* Disable the phy clock */ + clk_disable_unprepare(sphy->clk); + + return ret; +} + +/* + * The function passed to the usb driver for phy shutdown + */ +static void samsung_usb2phy_shutdown(struct usb_phy *phy) +{ + struct samsung_usbphy *sphy; + struct usb_bus *host = NULL; + unsigned long flags; + + sphy = phy_to_sphy(phy); + + host = phy->otg->host; + + if (clk_prepare_enable(sphy->clk)) { + dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); + return; + } + + spin_lock_irqsave(&sphy->lock, flags); + + if (host) { + /* setting default phy-type for USB 2.0 */ + if (!strstr(dev_name(host->controller), "ehci") || + !strstr(dev_name(host->controller), "ohci")) + samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST); + } else { + samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE); + } + + /* De-initialize usb phy registers */ + if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) + samsung_exynos5_usb2phy_disable(sphy); + else + samsung_usb2phy_disable(sphy); + + /* Enable phy isolation */ + if (sphy->plat && sphy->plat->pmu_isolation) + sphy->plat->pmu_isolation(true); + else + samsung_usbphy_set_isolation(sphy, true); + + spin_unlock_irqrestore(&sphy->lock, flags); + + clk_disable_unprepare(sphy->clk); +} + +static int samsung_usb2phy_probe(struct platform_device *pdev) +{ + struct samsung_usbphy *sphy; + struct usb_otg *otg; + struct samsung_usbphy_data *pdata = pdev->dev.platform_data; + const struct samsung_usbphy_drvdata *drv_data; + struct device *dev = &pdev->dev; + struct resource *phy_mem; + void __iomem *phy_base; + struct clk *clk; + int ret; + + phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!phy_mem) { + dev_err(dev, "%s: missing mem resource\n", __func__); + return -ENODEV; + } + + phy_base = devm_ioremap_resource(dev, phy_mem); + if (IS_ERR(phy_base)) + return PTR_ERR(phy_base); + + sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL); + if (!sphy) + return -ENOMEM; + + otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL); + if (!otg) + return -ENOMEM; + + drv_data = samsung_usbphy_get_driver_data(pdev); + + if (drv_data->cpu_type == TYPE_EXYNOS5250) + clk = devm_clk_get(dev, "usbhost"); + else + clk = devm_clk_get(dev, "otg"); + + if (IS_ERR(clk)) { + dev_err(dev, "Failed to get otg clock\n"); + return PTR_ERR(clk); + } + + sphy->dev = dev; + + if (dev->of_node) { + ret = samsung_usbphy_parse_dt(sphy); + if (ret < 0) + return ret; + } else { + if (!pdata) { + dev_err(dev, "no platform data specified\n"); + return -EINVAL; + } + } + + sphy->plat = pdata; + sphy->regs = phy_base; + sphy->clk = clk; + sphy->drv_data = drv_data; + sphy->phy.dev = sphy->dev; + sphy->phy.label = "samsung-usb2phy"; + sphy->phy.init = samsung_usb2phy_init; + sphy->phy.shutdown = samsung_usb2phy_shutdown; + sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy); + + sphy->phy.otg = otg; + sphy->phy.otg->phy = &sphy->phy; + sphy->phy.otg->set_host = samsung_usbphy_set_host; + + spin_lock_init(&sphy->lock); + + platform_set_drvdata(pdev, sphy); + + return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2); +} + +static int samsung_usb2phy_remove(struct platform_device *pdev) +{ + struct samsung_usbphy *sphy = platform_get_drvdata(pdev); + + usb_remove_phy(&sphy->phy); + + if (sphy->pmuregs) + iounmap(sphy->pmuregs); + if (sphy->sysreg) + iounmap(sphy->sysreg); + + return 0; +} + +static const struct samsung_usbphy_drvdata usb2phy_s3c64xx = { + .cpu_type = TYPE_S3C64XX, + .devphy_en_mask = S3C64XX_USBPHY_ENABLE, +}; + +static const struct samsung_usbphy_drvdata usb2phy_exynos4 = { + .cpu_type = TYPE_EXYNOS4210, + .devphy_en_mask = EXYNOS_USBPHY_ENABLE, + .hostphy_en_mask = EXYNOS_USBPHY_ENABLE, +}; + +static struct samsung_usbphy_drvdata usb2phy_exynos5 = { + .cpu_type = TYPE_EXYNOS5250, + .hostphy_en_mask = EXYNOS_USBPHY_ENABLE, + .hostphy_reg_offset = EXYNOS_USBHOST_PHY_CTRL_OFFSET, +}; + +#ifdef CONFIG_OF +static const struct of_device_id samsung_usbphy_dt_match[] = { + { + .compatible = "samsung,s3c64xx-usb2phy", + .data = &usb2phy_s3c64xx, + }, { + .compatible = "samsung,exynos4210-usb2phy", + .data = &usb2phy_exynos4, + }, { + .compatible = "samsung,exynos5250-usb2phy", + .data = &usb2phy_exynos5 + }, + {}, +}; +MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match); +#endif + +static struct platform_device_id samsung_usbphy_driver_ids[] = { + { + .name = "s3c64xx-usb2phy", + .driver_data = (unsigned long)&usb2phy_s3c64xx, + }, { + .name = "exynos4210-usb2phy", + .driver_data = (unsigned long)&usb2phy_exynos4, + }, { + .name = "exynos5250-usb2phy", + .driver_data = (unsigned long)&usb2phy_exynos5, + }, + {}, +}; + +MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids); + +static struct platform_driver samsung_usb2phy_driver = { + .probe = samsung_usb2phy_probe, + .remove = samsung_usb2phy_remove, + .id_table = samsung_usbphy_driver_ids, + .driver = { + .name = "samsung-usb2phy", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(samsung_usbphy_dt_match), + }, +}; + +module_platform_driver(samsung_usb2phy_driver); + +MODULE_DESCRIPTION("Samsung USB 2.0 phy controller"); +MODULE_AUTHOR("Praveen Paneri <p.paneri@samsung.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:samsung-usb2phy"); diff --git a/drivers/usb/phy/phy-samsung-usb3.c b/drivers/usb/phy/phy-samsung-usb3.c new file mode 100644 index 000000000000..133f3d0c554f --- /dev/null +++ b/drivers/usb/phy/phy-samsung-usb3.c @@ -0,0 +1,347 @@ +/* linux/drivers/usb/phy/phy-samsung-usb3.c + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Vivek Gautam <gautam.vivek@samsung.com> + * + * Samsung USB 3.0 PHY transceiver; talks to DWC3 controller. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/usb/samsung_usb_phy.h> +#include <linux/platform_data/samsung-usbphy.h> + +#include "phy-samsung-usb.h" + +/* + * Sets the phy clk as EXTREFCLK (XXTI) which is internal clock from clock core. + */ +static u32 samsung_usb3phy_set_refclk(struct samsung_usbphy *sphy) +{ + u32 reg; + u32 refclk; + + refclk = sphy->ref_clk_freq; + + reg = PHYCLKRST_REFCLKSEL_EXT_REFCLK | + PHYCLKRST_FSEL(refclk); + + switch (refclk) { + case FSEL_CLKSEL_50M: + reg |= (PHYCLKRST_MPLL_MULTIPLIER_50M_REF | + PHYCLKRST_SSC_REFCLKSEL(0x00)); + break; + case FSEL_CLKSEL_20M: + reg |= (PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF | + PHYCLKRST_SSC_REFCLKSEL(0x00)); + break; + case FSEL_CLKSEL_19200K: + reg |= (PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF | + PHYCLKRST_SSC_REFCLKSEL(0x88)); + break; + case FSEL_CLKSEL_24M: + default: + reg |= (PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF | + PHYCLKRST_SSC_REFCLKSEL(0x88)); + break; + } + + return reg; +} + +static int samsung_exynos5_usb3phy_enable(struct samsung_usbphy *sphy) +{ + void __iomem *regs = sphy->regs; + u32 phyparam0; + u32 phyparam1; + u32 linksystem; + u32 phybatchg; + u32 phytest; + u32 phyclkrst; + + /* Reset USB 3.0 PHY */ + writel(0x0, regs + EXYNOS5_DRD_PHYREG0); + + phyparam0 = readl(regs + EXYNOS5_DRD_PHYPARAM0); + /* Select PHY CLK source */ + phyparam0 &= ~PHYPARAM0_REF_USE_PAD; + /* Set Loss-of-Signal Detector sensitivity */ + phyparam0 &= ~PHYPARAM0_REF_LOSLEVEL_MASK; + phyparam0 |= PHYPARAM0_REF_LOSLEVEL; + writel(phyparam0, regs + EXYNOS5_DRD_PHYPARAM0); + + writel(0x0, regs + EXYNOS5_DRD_PHYRESUME); + + /* + * Setting the Frame length Adj value[6:1] to default 0x20 + * See xHCI 1.0 spec, 5.2.4 + */ + linksystem = LINKSYSTEM_XHCI_VERSION_CONTROL | + LINKSYSTEM_FLADJ(0x20); + writel(linksystem, regs + EXYNOS5_DRD_LINKSYSTEM); + + phyparam1 = readl(regs + EXYNOS5_DRD_PHYPARAM1); + /* Set Tx De-Emphasis level */ + phyparam1 &= ~PHYPARAM1_PCS_TXDEEMPH_MASK; + phyparam1 |= PHYPARAM1_PCS_TXDEEMPH; + writel(phyparam1, regs + EXYNOS5_DRD_PHYPARAM1); + + phybatchg = readl(regs + EXYNOS5_DRD_PHYBATCHG); + phybatchg |= PHYBATCHG_UTMI_CLKSEL; + writel(phybatchg, regs + EXYNOS5_DRD_PHYBATCHG); + + /* PHYTEST POWERDOWN Control */ + phytest = readl(regs + EXYNOS5_DRD_PHYTEST); + phytest &= ~(PHYTEST_POWERDOWN_SSP | + PHYTEST_POWERDOWN_HSP); + writel(phytest, regs + EXYNOS5_DRD_PHYTEST); + + /* UTMI Power Control */ + writel(PHYUTMI_OTGDISABLE, regs + EXYNOS5_DRD_PHYUTMI); + + phyclkrst = samsung_usb3phy_set_refclk(sphy); + + phyclkrst |= PHYCLKRST_PORTRESET | + /* Digital power supply in normal operating mode */ + PHYCLKRST_RETENABLEN | + /* Enable ref clock for SS function */ + PHYCLKRST_REF_SSP_EN | + /* Enable spread spectrum */ + PHYCLKRST_SSC_EN | + /* Power down HS Bias and PLL blocks in suspend mode */ + PHYCLKRST_COMMONONN; + + writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST); + + udelay(10); + + phyclkrst &= ~(PHYCLKRST_PORTRESET); + writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST); + + return 0; +} + +static void samsung_exynos5_usb3phy_disable(struct samsung_usbphy *sphy) +{ + u32 phyutmi; + u32 phyclkrst; + u32 phytest; + void __iomem *regs = sphy->regs; + + phyutmi = PHYUTMI_OTGDISABLE | + PHYUTMI_FORCESUSPEND | + PHYUTMI_FORCESLEEP; + writel(phyutmi, regs + EXYNOS5_DRD_PHYUTMI); + + /* Resetting the PHYCLKRST enable bits to reduce leakage current */ + phyclkrst = readl(regs + EXYNOS5_DRD_PHYCLKRST); + phyclkrst &= ~(PHYCLKRST_REF_SSP_EN | + PHYCLKRST_SSC_EN | + PHYCLKRST_COMMONONN); + writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST); + + /* Control PHYTEST to remove leakage current */ + phytest = readl(regs + EXYNOS5_DRD_PHYTEST); + phytest |= (PHYTEST_POWERDOWN_SSP | + PHYTEST_POWERDOWN_HSP); + writel(phytest, regs + EXYNOS5_DRD_PHYTEST); +} + +static int samsung_usb3phy_init(struct usb_phy *phy) +{ + struct samsung_usbphy *sphy; + unsigned long flags; + int ret = 0; + + sphy = phy_to_sphy(phy); + + /* Enable the phy clock */ + ret = clk_prepare_enable(sphy->clk); + if (ret) { + dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); + return ret; + } + + spin_lock_irqsave(&sphy->lock, flags); + + /* setting default phy-type for USB 3.0 */ + samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE); + + /* Disable phy isolation */ + samsung_usbphy_set_isolation(sphy, false); + + /* Initialize usb phy registers */ + samsung_exynos5_usb3phy_enable(sphy); + + spin_unlock_irqrestore(&sphy->lock, flags); + + /* Disable the phy clock */ + clk_disable_unprepare(sphy->clk); + + return ret; +} + +/* + * The function passed to the usb driver for phy shutdown + */ +static void samsung_usb3phy_shutdown(struct usb_phy *phy) +{ + struct samsung_usbphy *sphy; + unsigned long flags; + + sphy = phy_to_sphy(phy); + + if (clk_prepare_enable(sphy->clk)) { + dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); + return; + } + + spin_lock_irqsave(&sphy->lock, flags); + + /* setting default phy-type for USB 3.0 */ + samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE); + + /* De-initialize usb phy registers */ + samsung_exynos5_usb3phy_disable(sphy); + + /* Enable phy isolation */ + samsung_usbphy_set_isolation(sphy, true); + + spin_unlock_irqrestore(&sphy->lock, flags); + + clk_disable_unprepare(sphy->clk); +} + +static int samsung_usb3phy_probe(struct platform_device *pdev) +{ + struct samsung_usbphy *sphy; + struct samsung_usbphy_data *pdata = pdev->dev.platform_data; + struct device *dev = &pdev->dev; + struct resource *phy_mem; + void __iomem *phy_base; + struct clk *clk; + int ret; + + phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!phy_mem) { + dev_err(dev, "%s: missing mem resource\n", __func__); + return -ENODEV; + } + + phy_base = devm_ioremap_resource(dev, phy_mem); + if (IS_ERR(phy_base)) + return PTR_ERR(phy_base); + + sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL); + if (!sphy) + return -ENOMEM; + + clk = devm_clk_get(dev, "usbdrd30"); + if (IS_ERR(clk)) { + dev_err(dev, "Failed to get device clock\n"); + return PTR_ERR(clk); + } + + sphy->dev = dev; + + if (dev->of_node) { + ret = samsung_usbphy_parse_dt(sphy); + if (ret < 0) + return ret; + } else { + if (!pdata) { + dev_err(dev, "no platform data specified\n"); + return -EINVAL; + } + } + + sphy->plat = pdata; + sphy->regs = phy_base; + sphy->clk = clk; + sphy->phy.dev = sphy->dev; + sphy->phy.label = "samsung-usb3phy"; + sphy->phy.init = samsung_usb3phy_init; + sphy->phy.shutdown = samsung_usb3phy_shutdown; + sphy->drv_data = samsung_usbphy_get_driver_data(pdev); + sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy); + + spin_lock_init(&sphy->lock); + + platform_set_drvdata(pdev, sphy); + + return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB3); +} + +static int samsung_usb3phy_remove(struct platform_device *pdev) +{ + struct samsung_usbphy *sphy = platform_get_drvdata(pdev); + + usb_remove_phy(&sphy->phy); + + if (sphy->pmuregs) + iounmap(sphy->pmuregs); + if (sphy->sysreg) + iounmap(sphy->sysreg); + + return 0; +} + +static struct samsung_usbphy_drvdata usb3phy_exynos5 = { + .cpu_type = TYPE_EXYNOS5250, + .devphy_en_mask = EXYNOS_USBPHY_ENABLE, +}; + +#ifdef CONFIG_OF +static const struct of_device_id samsung_usbphy_dt_match[] = { + { + .compatible = "samsung,exynos5250-usb3phy", + .data = &usb3phy_exynos5 + }, + {}, +}; +MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match); +#endif + +static struct platform_device_id samsung_usbphy_driver_ids[] = { + { + .name = "exynos5250-usb3phy", + .driver_data = (unsigned long)&usb3phy_exynos5, + }, + {}, +}; + +MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids); + +static struct platform_driver samsung_usb3phy_driver = { + .probe = samsung_usb3phy_probe, + .remove = samsung_usb3phy_remove, + .id_table = samsung_usbphy_driver_ids, + .driver = { + .name = "samsung-usb3phy", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(samsung_usbphy_dt_match), + }, +}; + +module_platform_driver(samsung_usb3phy_driver); + +MODULE_DESCRIPTION("Samsung USB 3.0 phy controller"); +MODULE_AUTHOR("Vivek Gautam <gautam.vivek@samsung.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:samsung-usb3phy"); diff --git a/drivers/usb/phy/tegra_usb_phy.c b/drivers/usb/phy/phy-tegra-usb.c index 5487d38481af..17d811292f3a 100644 --- a/drivers/usb/phy/tegra_usb_phy.c +++ b/drivers/usb/phy/phy-tegra-usb.c @@ -299,7 +299,7 @@ static void utmi_phy_clk_disable(struct tegra_usb_phy *phy) val &= ~USB_SUSP_SET; writel(val, base + USB_SUSP_CTRL); } else - tegra_ehci_set_phcd(&phy->u_phy, true); + phy->set_phcd(&phy->u_phy, true); if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0) pr_err("%s: timeout waiting for phy to stabilize\n", __func__); @@ -321,7 +321,7 @@ static void utmi_phy_clk_enable(struct tegra_usb_phy *phy) val &= ~USB_SUSP_CLR; writel(val, base + USB_SUSP_CTRL); } else - tegra_ehci_set_phcd(&phy->u_phy, false); + phy->set_phcd(&phy->u_phy, false); if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, USB_PHY_CLK_VALID)) @@ -444,7 +444,7 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy) utmi_phy_clk_enable(phy); if (!phy->is_legacy_phy) - tegra_ehci_set_pts(&phy->u_phy, 0); + phy->set_pts(&phy->u_phy, 0); return 0; } @@ -688,7 +688,10 @@ static int tegra_usb_phy_suspend(struct usb_phy *x, int suspend) } struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance, - void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode) + void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode, + void (*set_pts)(struct usb_phy *x, u8 pts_val), + void (*set_phcd)(struct usb_phy *x, bool enable)) + { struct tegra_usb_phy *phy; unsigned long parent_rate; @@ -707,6 +710,8 @@ struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance, phy->dev = dev; phy->is_legacy_phy = of_property_read_bool(np, "nvidia,has-legacy-mode"); + phy->set_pts = set_pts; + phy->set_phcd = set_phcd; err = of_property_match_string(np, "phy_type", "ulpi"); if (err < 0) phy->is_ulpi_phy = false; diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/phy/phy-twl4030-usb.c index a994715a3101..8f78d2d40722 100644 --- a/drivers/usb/otg/twl4030-usb.c +++ b/drivers/usb/phy/phy-twl4030-usb.c @@ -163,6 +163,8 @@ struct twl4030_usb { bool vbus_supplied; u8 asleep; bool irq_enabled; + + struct delayed_work id_workaround_work; }; /* internal define on top of container_of */ @@ -246,6 +248,25 @@ twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits) /*-------------------------------------------------------------------------*/ +static bool twl4030_is_driving_vbus(struct twl4030_usb *twl) +{ + int ret; + + ret = twl4030_usb_read(twl, PHY_CLK_CTRL_STS); + if (ret < 0 || !(ret & PHY_DPLL_CLK)) + /* + * if clocks are off, registers are not updated, + * but we can assume we don't drive VBUS in this case + */ + return false; + + ret = twl4030_usb_read(twl, ULPI_OTG_CTRL); + if (ret < 0) + return false; + + return (ret & (ULPI_OTG_DRVVBUS | ULPI_OTG_CHRGVBUS)) ? true : false; +} + static enum omap_musb_vbus_id_status twl4030_usb_linkstat(struct twl4030_usb *twl) { @@ -268,13 +289,19 @@ static enum omap_musb_vbus_id_status if (status < 0) dev_err(twl->dev, "USB link status err %d\n", status); else if (status & (BIT(7) | BIT(2))) { - if (status & (BIT(7))) - twl->vbus_supplied = true; + if (status & BIT(7)) { + if (twl4030_is_driving_vbus(twl)) + status &= ~BIT(7); + else + twl->vbus_supplied = true; + } if (status & BIT(2)) linkstat = OMAP_MUSB_ID_GROUND; - else + else if (status & BIT(7)) linkstat = OMAP_MUSB_VBUS_VALID; + else + linkstat = OMAP_MUSB_VBUS_OFF; } else { if (twl->linkstat != OMAP_MUSB_UNKNOWN) linkstat = OMAP_MUSB_VBUS_OFF; @@ -287,10 +314,6 @@ static enum omap_musb_vbus_id_status * are registered, and that both are active... */ - spin_lock_irq(&twl->lock); - twl->linkstat = linkstat; - spin_unlock_irq(&twl->lock); - return linkstat; } @@ -361,9 +384,17 @@ static void __twl4030_phy_power(struct twl4030_usb *twl, int on) static void twl4030_phy_power(struct twl4030_usb *twl, int on) { + int ret; + if (on) { - regulator_enable(twl->usb3v1); - regulator_enable(twl->usb1v8); + ret = regulator_enable(twl->usb3v1); + if (ret) + dev_err(twl->dev, "Failed to enable usb3v1\n"); + + ret = regulator_enable(twl->usb1v8); + if (ret) + dev_err(twl->dev, "Failed to enable usb1v8\n"); + /* * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP * in twl4030) resets the VUSB_DEDICATED2 register. This reset @@ -372,7 +403,11 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on) * is re-activated. This ensures that VUSB3V1 is really active. */ twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); - regulator_enable(twl->usb1v5); + + ret = regulator_enable(twl->usb1v5); + if (ret) + dev_err(twl->dev, "Failed to enable usb1v5\n"); + __twl4030_phy_power(twl, 1); twl4030_usb_write(twl, PHY_CLK_CTRL, twl4030_usb_read(twl, PHY_CLK_CTRL) | @@ -412,6 +447,16 @@ static void twl4030_phy_resume(struct twl4030_usb *twl) __twl4030_phy_resume(twl); twl->asleep = 0; dev_dbg(twl->dev, "%s\n", __func__); + + /* + * XXX When VBUS gets driven after musb goes to A mode, + * ID_PRES related interrupts no longer arrive, why? + * Register itself is updated fine though, so we must poll. + */ + if (twl->linkstat == OMAP_MUSB_ID_GROUND) { + cancel_delayed_work(&twl->id_workaround_work); + schedule_delayed_work(&twl->id_workaround_work, HZ); + } } static int twl4030_usb_ldo_init(struct twl4030_usb *twl) @@ -432,7 +477,7 @@ static int twl4030_usb_ldo_init(struct twl4030_usb *twl) /* Initialize 3.1V regulator */ twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP); - twl->usb3v1 = regulator_get(twl->dev, "usb3v1"); + twl->usb3v1 = devm_regulator_get(twl->dev, "usb3v1"); if (IS_ERR(twl->usb3v1)) return -ENODEV; @@ -441,18 +486,18 @@ static int twl4030_usb_ldo_init(struct twl4030_usb *twl) /* Initialize 1.5V regulator */ twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP); - twl->usb1v5 = regulator_get(twl->dev, "usb1v5"); + twl->usb1v5 = devm_regulator_get(twl->dev, "usb1v5"); if (IS_ERR(twl->usb1v5)) - goto fail1; + return -ENODEV; twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE); /* Initialize 1.8V regulator */ twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP); - twl->usb1v8 = regulator_get(twl->dev, "usb1v8"); + twl->usb1v8 = devm_regulator_get(twl->dev, "usb1v8"); if (IS_ERR(twl->usb1v8)) - goto fail2; + return -ENODEV; twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE); @@ -461,14 +506,6 @@ static int twl4030_usb_ldo_init(struct twl4030_usb *twl) TWL4030_PM_MASTER_PROTECT_KEY); return 0; - -fail2: - regulator_put(twl->usb1v5); - twl->usb1v5 = NULL; -fail1: - regulator_put(twl->usb3v1); - twl->usb3v1 = NULL; - return -ENODEV; } static ssize_t twl4030_usb_vbus_show(struct device *dev, @@ -491,9 +528,18 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) { struct twl4030_usb *twl = _twl; enum omap_musb_vbus_id_status status; + bool status_changed = false; status = twl4030_usb_linkstat(twl); - if (status > 0) { + + spin_lock_irq(&twl->lock); + if (status >= 0 && status != twl->linkstat) { + twl->linkstat = status; + status_changed = true; + } + spin_unlock_irq(&twl->lock); + + if (status_changed) { /* FIXME add a set_power() method so that B-devices can * configure the charger appropriately. It's not always * correct to consume VBUS power, and how much current to @@ -505,37 +551,62 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) * USB_LINK_VBUS state. musb_hdrc won't care until it * starts to handle softconnect right. */ - if (status == OMAP_MUSB_VBUS_OFF || - status == OMAP_MUSB_ID_FLOAT) - twl4030_phy_suspend(twl, 0); - else - twl4030_phy_resume(twl); - - omap_musb_mailbox(twl->linkstat); + omap_musb_mailbox(status); } sysfs_notify(&twl->dev->kobj, NULL, "vbus"); return IRQ_HANDLED; } -static void twl4030_usb_phy_init(struct twl4030_usb *twl) +static void twl4030_id_workaround_work(struct work_struct *work) { + struct twl4030_usb *twl = container_of(work, struct twl4030_usb, + id_workaround_work.work); enum omap_musb_vbus_id_status status; + bool status_changed = false; status = twl4030_usb_linkstat(twl); - if (status > 0) { - if (status == OMAP_MUSB_VBUS_OFF || - status == OMAP_MUSB_ID_FLOAT) { - __twl4030_phy_power(twl, 0); - twl->asleep = 1; - } else { - __twl4030_phy_resume(twl); - twl->asleep = 0; - } - omap_musb_mailbox(twl->linkstat); + spin_lock_irq(&twl->lock); + if (status >= 0 && status != twl->linkstat) { + twl->linkstat = status; + status_changed = true; + } + spin_unlock_irq(&twl->lock); + + if (status_changed) { + dev_dbg(twl->dev, "handle missing status change to %d\n", + status); + omap_musb_mailbox(status); } + + /* don't schedule during sleep - irq works right then */ + if (status == OMAP_MUSB_ID_GROUND && !twl->asleep) { + cancel_delayed_work(&twl->id_workaround_work); + schedule_delayed_work(&twl->id_workaround_work, HZ); + } +} + +static int twl4030_usb_phy_init(struct usb_phy *phy) +{ + struct twl4030_usb *twl = phy_to_twl(phy); + enum omap_musb_vbus_id_status status; + + /* + * Start in sleep state, we'll get called through set_suspend() + * callback when musb is runtime resumed and it's time to start. + */ + __twl4030_phy_power(twl, 0); + twl->asleep = 1; + + status = twl4030_usb_linkstat(twl); + twl->linkstat = status; + + if (status == OMAP_MUSB_ID_GROUND || status == OMAP_MUSB_VBUS_VALID) + omap_musb_mailbox(twl->linkstat); + sysfs_notify(&twl->dev->kobj, NULL, "vbus"); + return 0; } static int twl4030_set_suspend(struct usb_phy *x, int suspend) @@ -612,6 +683,7 @@ static int twl4030_usb_probe(struct platform_device *pdev) twl->phy.otg = otg; twl->phy.type = USB_PHY_TYPE_USB2; twl->phy.set_suspend = twl4030_set_suspend; + twl->phy.init = twl4030_usb_phy_init; otg->phy = &twl->phy; otg->set_host = twl4030_set_host; @@ -620,6 +692,8 @@ static int twl4030_usb_probe(struct platform_device *pdev) /* init spinlock for workqueue */ spin_lock_init(&twl->lock); + INIT_DELAYED_WORK(&twl->id_workaround_work, twl4030_id_workaround_work); + err = twl4030_usb_ldo_init(twl); if (err) { dev_err(&pdev->dev, "ldo init failed\n"); @@ -640,30 +714,25 @@ static int twl4030_usb_probe(struct platform_device *pdev) * need both handles, otherwise just one suffices. */ twl->irq_enabled = true; - status = request_threaded_irq(twl->irq, NULL, twl4030_usb_irq, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | - IRQF_ONESHOT, "twl4030_usb", twl); + status = devm_request_threaded_irq(twl->dev, twl->irq, NULL, + twl4030_usb_irq, IRQF_TRIGGER_FALLING | + IRQF_TRIGGER_RISING | IRQF_ONESHOT, "twl4030_usb", twl); if (status < 0) { dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n", twl->irq, status); return status; } - /* Power down phy or make it work according to - * current link state. - */ - twl4030_usb_phy_init(twl); - dev_info(&pdev->dev, "Initialized TWL4030 USB module\n"); return 0; } -static int __exit twl4030_usb_remove(struct platform_device *pdev) +static int twl4030_usb_remove(struct platform_device *pdev) { struct twl4030_usb *twl = platform_get_drvdata(pdev); int val; - free_irq(twl->irq, twl); + cancel_delayed_work(&twl->id_workaround_work); device_remove_file(twl->dev, &dev_attr_vbus); /* set transceiver mode to power on defaults */ @@ -685,9 +754,6 @@ static int __exit twl4030_usb_remove(struct platform_device *pdev) if (!twl->asleep) twl4030_phy_power(twl, 0); - regulator_put(twl->usb1v5); - regulator_put(twl->usb1v8); - regulator_put(twl->usb3v1); return 0; } @@ -702,7 +768,7 @@ MODULE_DEVICE_TABLE(of, twl4030_usb_id_table); static struct platform_driver twl4030_usb_driver = { .probe = twl4030_usb_probe, - .remove = __exit_p(twl4030_usb_remove), + .remove = twl4030_usb_remove, .driver = { .name = "twl4030_usb", .owner = THIS_MODULE, diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c index 8cd6cf49bdbd..9de7ada90a8b 100644 --- a/drivers/usb/otg/twl6030-usb.c +++ b/drivers/usb/phy/phy-twl6030-usb.c @@ -211,6 +211,7 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl) struct twl6030_usb *twl = _twl; enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN; u8 vbus_state, hw_state; + int ret; hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS); @@ -218,7 +219,10 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl) CONTROLLER_STAT1); if (!(hw_state & STS_USB_ID)) { if (vbus_state & VBUS_DET) { - regulator_enable(twl->usb3v3); + ret = regulator_enable(twl->usb3v3); + if (ret) + dev_err(twl->dev, "Failed to enable usb3v3\n"); + twl->asleep = 1; status = OMAP_MUSB_VBUS_VALID; twl->linkstat = status; @@ -245,12 +249,15 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl) struct twl6030_usb *twl = _twl; enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN; u8 hw_state; + int ret; hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS); if (hw_state & STS_USB_ID) { + ret = regulator_enable(twl->usb3v3); + if (ret) + dev_err(twl->dev, "Failed to enable usb3v3\n"); - regulator_enable(twl->usb3v3); twl->asleep = 1; twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR); twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET); @@ -393,7 +400,7 @@ static int twl6030_usb_probe(struct platform_device *pdev) return 0; } -static int __exit twl6030_usb_remove(struct platform_device *pdev) +static int twl6030_usb_remove(struct platform_device *pdev) { struct twl6030_usb *twl = platform_get_drvdata(pdev); @@ -420,7 +427,7 @@ MODULE_DEVICE_TABLE(of, twl6030_usb_id_table); static struct platform_driver twl6030_usb_driver = { .probe = twl6030_usb_probe, - .remove = __exit_p(twl6030_usb_remove), + .remove = twl6030_usb_remove, .driver = { .name = "twl6030_usb", .owner = THIS_MODULE, diff --git a/drivers/usb/otg/ulpi_viewport.c b/drivers/usb/phy/phy-ulpi-viewport.c index c5ba7e5423fc..c5ba7e5423fc 100644 --- a/drivers/usb/otg/ulpi_viewport.c +++ b/drivers/usb/phy/phy-ulpi-viewport.c diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/phy/phy-ulpi.c index 217339dd7a90..217339dd7a90 100644 --- a/drivers/usb/otg/ulpi.c +++ b/drivers/usb/phy/phy-ulpi.c diff --git a/drivers/usb/otg/otg.c b/drivers/usb/phy/phy.c index 2bd03d261a50..a9984c700d2c 100644 --- a/drivers/usb/otg/otg.c +++ b/drivers/usb/phy/phy.c @@ -1,14 +1,13 @@ /* - * otg.c -- USB OTG utility code + * phy.c -- USB phy handling * - * Copyright (C) 2004 Texas Instruments + * Copyright (C) 2004-2013 Texas Instruments * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ - #include <linux/kernel.h> #include <linux/export.h> #include <linux/err.h> @@ -17,7 +16,7 @@ #include <linux/slab.h> #include <linux/of.h> -#include <linux/usb/otg.h> +#include <linux/usb/phy.h> static LIST_HEAD(phy_list); static LIST_HEAD(phy_bind_list); @@ -110,7 +109,7 @@ struct usb_phy *devm_usb_get_phy(struct device *dev, enum usb_phy_type type) return phy; } -EXPORT_SYMBOL(devm_usb_get_phy); +EXPORT_SYMBOL_GPL(devm_usb_get_phy); /** * usb_get_phy - find the USB PHY @@ -143,7 +142,7 @@ err0: return phy; } -EXPORT_SYMBOL(usb_get_phy); +EXPORT_SYMBOL_GPL(usb_get_phy); /** * devm_usb_get_phy_by_phandle - find the USB PHY by phandle @@ -207,7 +206,7 @@ err0: return phy; } -EXPORT_SYMBOL(devm_usb_get_phy_by_phandle); +EXPORT_SYMBOL_GPL(devm_usb_get_phy_by_phandle); /** * usb_get_phy_dev - find the USB PHY @@ -240,7 +239,7 @@ err0: return phy; } -EXPORT_SYMBOL(usb_get_phy_dev); +EXPORT_SYMBOL_GPL(usb_get_phy_dev); /** * devm_usb_get_phy_dev - find the USB PHY using device ptr and index @@ -270,7 +269,7 @@ struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index) return phy; } -EXPORT_SYMBOL(devm_usb_get_phy_dev); +EXPORT_SYMBOL_GPL(devm_usb_get_phy_dev); /** * devm_usb_put_phy - release the USB PHY @@ -289,7 +288,7 @@ void devm_usb_put_phy(struct device *dev, struct usb_phy *phy) r = devres_destroy(dev, devm_usb_phy_release, devm_usb_phy_match, phy); dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n"); } -EXPORT_SYMBOL(devm_usb_put_phy); +EXPORT_SYMBOL_GPL(devm_usb_put_phy); /** * usb_put_phy - release the USB PHY @@ -308,7 +307,7 @@ void usb_put_phy(struct usb_phy *x) module_put(owner); } } -EXPORT_SYMBOL(usb_put_phy); +EXPORT_SYMBOL_GPL(usb_put_phy); /** * usb_add_phy - declare the USB PHY @@ -348,7 +347,7 @@ out: spin_unlock_irqrestore(&phy_lock, flags); return ret; } -EXPORT_SYMBOL(usb_add_phy); +EXPORT_SYMBOL_GPL(usb_add_phy); /** * usb_add_phy_dev - declare the USB PHY @@ -378,7 +377,7 @@ int usb_add_phy_dev(struct usb_phy *x) spin_unlock_irqrestore(&phy_lock, flags); return 0; } -EXPORT_SYMBOL(usb_add_phy_dev); +EXPORT_SYMBOL_GPL(usb_add_phy_dev); /** * usb_remove_phy - remove the OTG PHY @@ -400,7 +399,7 @@ void usb_remove_phy(struct usb_phy *x) } spin_unlock_irqrestore(&phy_lock, flags); } -EXPORT_SYMBOL(usb_remove_phy); +EXPORT_SYMBOL_GPL(usb_remove_phy); /** * usb_bind_phy - bind the phy and the controller that uses the phy @@ -414,7 +413,7 @@ EXPORT_SYMBOL(usb_remove_phy); * * To be used by platform specific initialization code. */ -int __init usb_bind_phy(const char *dev_name, u8 index, +int usb_bind_phy(const char *dev_name, u8 index, const char *phy_dev_name) { struct usb_phy_bind *phy_bind; @@ -437,38 +436,3 @@ int __init usb_bind_phy(const char *dev_name, u8 index, return 0; } EXPORT_SYMBOL_GPL(usb_bind_phy); - -const char *otg_state_string(enum usb_otg_state state) -{ - switch (state) { - case OTG_STATE_A_IDLE: - return "a_idle"; - case OTG_STATE_A_WAIT_VRISE: - return "a_wait_vrise"; - case OTG_STATE_A_WAIT_BCON: - return "a_wait_bcon"; - case OTG_STATE_A_HOST: - return "a_host"; - case OTG_STATE_A_SUSPEND: - return "a_suspend"; - case OTG_STATE_A_PERIPHERAL: - return "a_peripheral"; - case OTG_STATE_A_WAIT_VFALL: - return "a_wait_vfall"; - case OTG_STATE_A_VBUS_ERR: - return "a_vbus_err"; - case OTG_STATE_B_IDLE: - return "b_idle"; - case OTG_STATE_B_SRP_INIT: - return "b_srp_init"; - case OTG_STATE_B_PERIPHERAL: - return "b_peripheral"; - case OTG_STATE_B_WAIT_ACON: - return "b_wait_acon"; - case OTG_STATE_B_HOST: - return "b_host"; - default: - return "UNDEFINED"; - } -} -EXPORT_SYMBOL(otg_state_string); diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c deleted file mode 100644 index 967101ec15fd..000000000000 --- a/drivers/usb/phy/samsung-usbphy.c +++ /dev/null @@ -1,928 +0,0 @@ -/* linux/drivers/usb/phy/samsung-usbphy.c - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Author: Praveen Paneri <p.paneri@samsung.com> - * - * Samsung USB2.0 PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and - * OHCI-EXYNOS controllers. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/usb/otg.h> -#include <linux/usb/samsung_usb_phy.h> -#include <linux/platform_data/samsung-usbphy.h> - -/* Register definitions */ - -#define SAMSUNG_PHYPWR (0x00) - -#define PHYPWR_NORMAL_MASK (0x19 << 0) -#define PHYPWR_OTG_DISABLE (0x1 << 4) -#define PHYPWR_ANALOG_POWERDOWN (0x1 << 3) -#define PHYPWR_FORCE_SUSPEND (0x1 << 1) -/* For Exynos4 */ -#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0) -#define PHYPWR_SLEEP_PHY0 (0x1 << 5) - -#define SAMSUNG_PHYCLK (0x04) - -#define PHYCLK_MODE_USB11 (0x1 << 6) -#define PHYCLK_EXT_OSC (0x1 << 5) -#define PHYCLK_COMMON_ON_N (0x1 << 4) -#define PHYCLK_ID_PULL (0x1 << 2) -#define PHYCLK_CLKSEL_MASK (0x3 << 0) -#define PHYCLK_CLKSEL_48M (0x0 << 0) -#define PHYCLK_CLKSEL_12M (0x2 << 0) -#define PHYCLK_CLKSEL_24M (0x3 << 0) - -#define SAMSUNG_RSTCON (0x08) - -#define RSTCON_PHYLINK_SWRST (0x1 << 2) -#define RSTCON_HLINK_SWRST (0x1 << 1) -#define RSTCON_SWRST (0x1 << 0) - -/* EXYNOS5 */ -#define EXYNOS5_PHY_HOST_CTRL0 (0x00) - -#define HOST_CTRL0_PHYSWRSTALL (0x1 << 31) - -#define HOST_CTRL0_REFCLKSEL_MASK (0x3 << 19) -#define HOST_CTRL0_REFCLKSEL_XTAL (0x0 << 19) -#define HOST_CTRL0_REFCLKSEL_EXTL (0x1 << 19) -#define HOST_CTRL0_REFCLKSEL_CLKCORE (0x2 << 19) - -#define HOST_CTRL0_FSEL_MASK (0x7 << 16) -#define HOST_CTRL0_FSEL(_x) ((_x) << 16) - -#define FSEL_CLKSEL_50M (0x7) -#define FSEL_CLKSEL_24M (0x5) -#define FSEL_CLKSEL_20M (0x4) -#define FSEL_CLKSEL_19200K (0x3) -#define FSEL_CLKSEL_12M (0x2) -#define FSEL_CLKSEL_10M (0x1) -#define FSEL_CLKSEL_9600K (0x0) - -#define HOST_CTRL0_TESTBURNIN (0x1 << 11) -#define HOST_CTRL0_RETENABLE (0x1 << 10) -#define HOST_CTRL0_COMMONON_N (0x1 << 9) -#define HOST_CTRL0_SIDDQ (0x1 << 6) -#define HOST_CTRL0_FORCESLEEP (0x1 << 5) -#define HOST_CTRL0_FORCESUSPEND (0x1 << 4) -#define HOST_CTRL0_WORDINTERFACE (0x1 << 3) -#define HOST_CTRL0_UTMISWRST (0x1 << 2) -#define HOST_CTRL0_LINKSWRST (0x1 << 1) -#define HOST_CTRL0_PHYSWRST (0x1 << 0) - -#define EXYNOS5_PHY_HOST_TUNE0 (0x04) - -#define EXYNOS5_PHY_HSIC_CTRL1 (0x10) - -#define EXYNOS5_PHY_HSIC_TUNE1 (0x14) - -#define EXYNOS5_PHY_HSIC_CTRL2 (0x20) - -#define EXYNOS5_PHY_HSIC_TUNE2 (0x24) - -#define HSIC_CTRL_REFCLKSEL_MASK (0x3 << 23) -#define HSIC_CTRL_REFCLKSEL (0x2 << 23) - -#define HSIC_CTRL_REFCLKDIV_MASK (0x7f << 16) -#define HSIC_CTRL_REFCLKDIV(_x) ((_x) << 16) -#define HSIC_CTRL_REFCLKDIV_12 (0x24 << 16) -#define HSIC_CTRL_REFCLKDIV_15 (0x1c << 16) -#define HSIC_CTRL_REFCLKDIV_16 (0x1a << 16) -#define HSIC_CTRL_REFCLKDIV_19_2 (0x15 << 16) -#define HSIC_CTRL_REFCLKDIV_20 (0x14 << 16) - -#define HSIC_CTRL_SIDDQ (0x1 << 6) -#define HSIC_CTRL_FORCESLEEP (0x1 << 5) -#define HSIC_CTRL_FORCESUSPEND (0x1 << 4) -#define HSIC_CTRL_WORDINTERFACE (0x1 << 3) -#define HSIC_CTRL_UTMISWRST (0x1 << 2) -#define HSIC_CTRL_PHYSWRST (0x1 << 0) - -#define EXYNOS5_PHY_HOST_EHCICTRL (0x30) - -#define HOST_EHCICTRL_ENAINCRXALIGN (0x1 << 29) -#define HOST_EHCICTRL_ENAINCR4 (0x1 << 28) -#define HOST_EHCICTRL_ENAINCR8 (0x1 << 27) -#define HOST_EHCICTRL_ENAINCR16 (0x1 << 26) - -#define EXYNOS5_PHY_HOST_OHCICTRL (0x34) - -#define HOST_OHCICTRL_SUSPLGCY (0x1 << 3) -#define HOST_OHCICTRL_APPSTARTCLK (0x1 << 2) -#define HOST_OHCICTRL_CNTSEL (0x1 << 1) -#define HOST_OHCICTRL_CLKCKTRST (0x1 << 0) - -#define EXYNOS5_PHY_OTG_SYS (0x38) - -#define OTG_SYS_PHYLINK_SWRESET (0x1 << 14) -#define OTG_SYS_LINKSWRST_UOTG (0x1 << 13) -#define OTG_SYS_PHY0_SWRST (0x1 << 12) - -#define OTG_SYS_REFCLKSEL_MASK (0x3 << 9) -#define OTG_SYS_REFCLKSEL_XTAL (0x0 << 9) -#define OTG_SYS_REFCLKSEL_EXTL (0x1 << 9) -#define OTG_SYS_REFCLKSEL_CLKCORE (0x2 << 9) - -#define OTG_SYS_IDPULLUP_UOTG (0x1 << 8) -#define OTG_SYS_COMMON_ON (0x1 << 7) - -#define OTG_SYS_FSEL_MASK (0x7 << 4) -#define OTG_SYS_FSEL(_x) ((_x) << 4) - -#define OTG_SYS_FORCESLEEP (0x1 << 3) -#define OTG_SYS_OTGDISABLE (0x1 << 2) -#define OTG_SYS_SIDDQ_UOTG (0x1 << 1) -#define OTG_SYS_FORCESUSPEND (0x1 << 0) - -#define EXYNOS5_PHY_OTG_TUNE (0x40) - -#ifndef MHZ -#define MHZ (1000*1000) -#endif - -#ifndef KHZ -#define KHZ (1000) -#endif - -#define EXYNOS_USBHOST_PHY_CTRL_OFFSET (0x4) -#define S3C64XX_USBPHY_ENABLE (0x1 << 16) -#define EXYNOS_USBPHY_ENABLE (0x1 << 0) -#define EXYNOS_USB20PHY_CFG_HOST_LINK (0x1 << 0) - -enum samsung_cpu_type { - TYPE_S3C64XX, - TYPE_EXYNOS4210, - TYPE_EXYNOS5250, -}; - -/* - * struct samsung_usbphy_drvdata - driver data for various SoC variants - * @cpu_type: machine identifier - * @devphy_en_mask: device phy enable mask for PHY CONTROL register - * @hostphy_en_mask: host phy enable mask for PHY CONTROL register - * @devphy_reg_offset: offset to DEVICE PHY CONTROL register from - * mapped address of system controller. - * @hostphy_reg_offset: offset to HOST PHY CONTROL register from - * mapped address of system controller. - * - * Here we have a separate mask for device type phy. - * Having different masks for host and device type phy helps - * in setting independent masks in case of SoCs like S5PV210, - * in which PHY0 and PHY1 enable bits belong to same register - * placed at position 0 and 1 respectively. - * Although for newer SoCs like exynos these bits belong to - * different registers altogether placed at position 0. - */ -struct samsung_usbphy_drvdata { - int cpu_type; - int devphy_en_mask; - int hostphy_en_mask; - u32 devphy_reg_offset; - u32 hostphy_reg_offset; -}; - -/* - * struct samsung_usbphy - transceiver driver state - * @phy: transceiver structure - * @plat: platform data - * @dev: The parent device supplied to the probe function - * @clk: usb phy clock - * @regs: usb phy controller registers memory base - * @pmuregs: USB device PHY_CONTROL register memory base - * @sysreg: USB2.0 PHY_CFG register memory base - * @ref_clk_freq: reference clock frequency selection - * @drv_data: driver data available for different SoCs - * @phy_type: Samsung SoCs specific phy types: #HOST - * #DEVICE - * @phy_usage: usage count for phy - * @lock: lock for phy operations - */ -struct samsung_usbphy { - struct usb_phy phy; - struct samsung_usbphy_data *plat; - struct device *dev; - struct clk *clk; - void __iomem *regs; - void __iomem *pmuregs; - void __iomem *sysreg; - int ref_clk_freq; - const struct samsung_usbphy_drvdata *drv_data; - enum samsung_usb_phy_type phy_type; - atomic_t phy_usage; - spinlock_t lock; -}; - -#define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy) - -int samsung_usbphy_set_host(struct usb_otg *otg, struct usb_bus *host) -{ - if (!otg) - return -ENODEV; - - if (!otg->host) - otg->host = host; - - return 0; -} - -static int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy) -{ - struct device_node *usbphy_sys; - - /* Getting node for system controller interface for usb-phy */ - usbphy_sys = of_get_child_by_name(sphy->dev->of_node, "usbphy-sys"); - if (!usbphy_sys) { - dev_err(sphy->dev, "No sys-controller interface for usb-phy\n"); - return -ENODEV; - } - - sphy->pmuregs = of_iomap(usbphy_sys, 0); - - if (sphy->pmuregs == NULL) { - dev_err(sphy->dev, "Can't get usb-phy pmu control register\n"); - goto err0; - } - - sphy->sysreg = of_iomap(usbphy_sys, 1); - - /* - * Not returning error code here, since this situation is not fatal. - * Few SoCs may not have this switch available - */ - if (sphy->sysreg == NULL) - dev_warn(sphy->dev, "Can't get usb-phy sysreg cfg register\n"); - - of_node_put(usbphy_sys); - - return 0; - -err0: - of_node_put(usbphy_sys); - return -ENXIO; -} - -/* - * Set isolation here for phy. - * Here 'on = true' would mean USB PHY block is isolated, hence - * de-activated and vice-versa. - */ -static void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on) -{ - void __iomem *reg = NULL; - u32 reg_val; - u32 en_mask = 0; - - if (!sphy->pmuregs) { - dev_warn(sphy->dev, "Can't set pmu isolation\n"); - return; - } - - switch (sphy->drv_data->cpu_type) { - case TYPE_S3C64XX: - /* - * Do nothing: We will add here once S3C64xx goes for DT support - */ - break; - case TYPE_EXYNOS4210: - /* - * Fall through since exynos4210 and exynos5250 have similar - * register architecture: two separate registers for host and - * device phy control with enable bit at position 0. - */ - case TYPE_EXYNOS5250: - if (sphy->phy_type == USB_PHY_TYPE_DEVICE) { - reg = sphy->pmuregs + - sphy->drv_data->devphy_reg_offset; - en_mask = sphy->drv_data->devphy_en_mask; - } else if (sphy->phy_type == USB_PHY_TYPE_HOST) { - reg = sphy->pmuregs + - sphy->drv_data->hostphy_reg_offset; - en_mask = sphy->drv_data->hostphy_en_mask; - } - break; - default: - dev_err(sphy->dev, "Invalid SoC type\n"); - return; - } - - reg_val = readl(reg); - - if (on) - reg_val &= ~en_mask; - else - reg_val |= en_mask; - - writel(reg_val, reg); -} - -/* - * Configure the mode of working of usb-phy here: HOST/DEVICE. - */ -static void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy) -{ - u32 reg; - - if (!sphy->sysreg) { - dev_warn(sphy->dev, "Can't configure specified phy mode\n"); - return; - } - - reg = readl(sphy->sysreg); - - if (sphy->phy_type == USB_PHY_TYPE_DEVICE) - reg &= ~EXYNOS_USB20PHY_CFG_HOST_LINK; - else if (sphy->phy_type == USB_PHY_TYPE_HOST) - reg |= EXYNOS_USB20PHY_CFG_HOST_LINK; - - writel(reg, sphy->sysreg); -} - -/* - * PHYs are different for USB Device and USB Host. - * This make sure that correct PHY type is selected before - * any operation on PHY. - */ -static int samsung_usbphy_set_type(struct usb_phy *phy, - enum samsung_usb_phy_type phy_type) -{ - struct samsung_usbphy *sphy = phy_to_sphy(phy); - - sphy->phy_type = phy_type; - - return 0; -} - -/* - * Returns reference clock frequency selection value - */ -static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy) -{ - struct clk *ref_clk; - int refclk_freq = 0; - - /* - * In exynos5250 USB host and device PHY use - * external crystal clock XXTI - */ - if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) - ref_clk = clk_get(sphy->dev, "ext_xtal"); - else - ref_clk = clk_get(sphy->dev, "xusbxti"); - if (IS_ERR(ref_clk)) { - dev_err(sphy->dev, "Failed to get reference clock\n"); - return PTR_ERR(ref_clk); - } - - if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) { - /* set clock frequency for PLL */ - switch (clk_get_rate(ref_clk)) { - case 9600 * KHZ: - refclk_freq = FSEL_CLKSEL_9600K; - break; - case 10 * MHZ: - refclk_freq = FSEL_CLKSEL_10M; - break; - case 12 * MHZ: - refclk_freq = FSEL_CLKSEL_12M; - break; - case 19200 * KHZ: - refclk_freq = FSEL_CLKSEL_19200K; - break; - case 20 * MHZ: - refclk_freq = FSEL_CLKSEL_20M; - break; - case 50 * MHZ: - refclk_freq = FSEL_CLKSEL_50M; - break; - case 24 * MHZ: - default: - /* default reference clock */ - refclk_freq = FSEL_CLKSEL_24M; - break; - } - } else { - switch (clk_get_rate(ref_clk)) { - case 12 * MHZ: - refclk_freq = PHYCLK_CLKSEL_12M; - break; - case 24 * MHZ: - refclk_freq = PHYCLK_CLKSEL_24M; - break; - case 48 * MHZ: - refclk_freq = PHYCLK_CLKSEL_48M; - break; - default: - if (sphy->drv_data->cpu_type == TYPE_S3C64XX) - refclk_freq = PHYCLK_CLKSEL_48M; - else - refclk_freq = PHYCLK_CLKSEL_24M; - break; - } - } - clk_put(ref_clk); - - return refclk_freq; -} - -static bool exynos5_phyhost_is_on(void *regs) -{ - u32 reg; - - reg = readl(regs + EXYNOS5_PHY_HOST_CTRL0); - - return !(reg & HOST_CTRL0_SIDDQ); -} - -static void samsung_exynos5_usbphy_enable(struct samsung_usbphy *sphy) -{ - void __iomem *regs = sphy->regs; - u32 phyclk = sphy->ref_clk_freq; - u32 phyhost; - u32 phyotg; - u32 phyhsic; - u32 ehcictrl; - u32 ohcictrl; - - /* - * phy_usage helps in keeping usage count for phy - * so that the first consumer enabling the phy is also - * the last consumer to disable it. - */ - - atomic_inc(&sphy->phy_usage); - - if (exynos5_phyhost_is_on(regs)) { - dev_info(sphy->dev, "Already power on PHY\n"); - return; - } - - /* Host configuration */ - phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0); - - /* phy reference clock configuration */ - phyhost &= ~HOST_CTRL0_FSEL_MASK; - phyhost |= HOST_CTRL0_FSEL(phyclk); - - /* host phy reset */ - phyhost &= ~(HOST_CTRL0_PHYSWRST | - HOST_CTRL0_PHYSWRSTALL | - HOST_CTRL0_SIDDQ | - /* Enable normal mode of operation */ - HOST_CTRL0_FORCESUSPEND | - HOST_CTRL0_FORCESLEEP); - - /* Link reset */ - phyhost |= (HOST_CTRL0_LINKSWRST | - HOST_CTRL0_UTMISWRST | - /* COMMON Block configuration during suspend */ - HOST_CTRL0_COMMONON_N); - writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); - udelay(10); - phyhost &= ~(HOST_CTRL0_LINKSWRST | - HOST_CTRL0_UTMISWRST); - writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); - - /* OTG configuration */ - phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS); - - /* phy reference clock configuration */ - phyotg &= ~OTG_SYS_FSEL_MASK; - phyotg |= OTG_SYS_FSEL(phyclk); - - /* Enable normal mode of operation */ - phyotg &= ~(OTG_SYS_FORCESUSPEND | - OTG_SYS_SIDDQ_UOTG | - OTG_SYS_FORCESLEEP | - OTG_SYS_REFCLKSEL_MASK | - /* COMMON Block configuration during suspend */ - OTG_SYS_COMMON_ON); - - /* OTG phy & link reset */ - phyotg |= (OTG_SYS_PHY0_SWRST | - OTG_SYS_LINKSWRST_UOTG | - OTG_SYS_PHYLINK_SWRESET | - OTG_SYS_OTGDISABLE | - /* Set phy refclk */ - OTG_SYS_REFCLKSEL_CLKCORE); - - writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); - udelay(10); - phyotg &= ~(OTG_SYS_PHY0_SWRST | - OTG_SYS_LINKSWRST_UOTG | - OTG_SYS_PHYLINK_SWRESET); - writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); - - /* HSIC phy configuration */ - phyhsic = (HSIC_CTRL_REFCLKDIV_12 | - HSIC_CTRL_REFCLKSEL | - HSIC_CTRL_PHYSWRST); - writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); - writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); - udelay(10); - phyhsic &= ~HSIC_CTRL_PHYSWRST; - writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); - writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); - - udelay(80); - - /* enable EHCI DMA burst */ - ehcictrl = readl(regs + EXYNOS5_PHY_HOST_EHCICTRL); - ehcictrl |= (HOST_EHCICTRL_ENAINCRXALIGN | - HOST_EHCICTRL_ENAINCR4 | - HOST_EHCICTRL_ENAINCR8 | - HOST_EHCICTRL_ENAINCR16); - writel(ehcictrl, regs + EXYNOS5_PHY_HOST_EHCICTRL); - - /* set ohci_suspend_on_n */ - ohcictrl = readl(regs + EXYNOS5_PHY_HOST_OHCICTRL); - ohcictrl |= HOST_OHCICTRL_SUSPLGCY; - writel(ohcictrl, regs + EXYNOS5_PHY_HOST_OHCICTRL); -} - -static void samsung_usbphy_enable(struct samsung_usbphy *sphy) -{ - void __iomem *regs = sphy->regs; - u32 phypwr; - u32 phyclk; - u32 rstcon; - - /* set clock frequency for PLL */ - phyclk = sphy->ref_clk_freq; - phypwr = readl(regs + SAMSUNG_PHYPWR); - rstcon = readl(regs + SAMSUNG_RSTCON); - - switch (sphy->drv_data->cpu_type) { - case TYPE_S3C64XX: - phyclk &= ~PHYCLK_COMMON_ON_N; - phypwr &= ~PHYPWR_NORMAL_MASK; - rstcon |= RSTCON_SWRST; - break; - case TYPE_EXYNOS4210: - phypwr &= ~PHYPWR_NORMAL_MASK_PHY0; - rstcon |= RSTCON_SWRST; - default: - break; - } - - writel(phyclk, regs + SAMSUNG_PHYCLK); - /* Configure PHY0 for normal operation*/ - writel(phypwr, regs + SAMSUNG_PHYPWR); - /* reset all ports of PHY and Link */ - writel(rstcon, regs + SAMSUNG_RSTCON); - udelay(10); - rstcon &= ~RSTCON_SWRST; - writel(rstcon, regs + SAMSUNG_RSTCON); -} - -static void samsung_exynos5_usbphy_disable(struct samsung_usbphy *sphy) -{ - void __iomem *regs = sphy->regs; - u32 phyhost; - u32 phyotg; - u32 phyhsic; - - if (atomic_dec_return(&sphy->phy_usage) > 0) { - dev_info(sphy->dev, "still being used\n"); - return; - } - - phyhsic = (HSIC_CTRL_REFCLKDIV_12 | - HSIC_CTRL_REFCLKSEL | - HSIC_CTRL_SIDDQ | - HSIC_CTRL_FORCESLEEP | - HSIC_CTRL_FORCESUSPEND); - writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); - writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); - - phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0); - phyhost |= (HOST_CTRL0_SIDDQ | - HOST_CTRL0_FORCESUSPEND | - HOST_CTRL0_FORCESLEEP | - HOST_CTRL0_PHYSWRST | - HOST_CTRL0_PHYSWRSTALL); - writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); - - phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS); - phyotg |= (OTG_SYS_FORCESUSPEND | - OTG_SYS_SIDDQ_UOTG | - OTG_SYS_FORCESLEEP); - writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); -} - -static void samsung_usbphy_disable(struct samsung_usbphy *sphy) -{ - void __iomem *regs = sphy->regs; - u32 phypwr; - - phypwr = readl(regs + SAMSUNG_PHYPWR); - - switch (sphy->drv_data->cpu_type) { - case TYPE_S3C64XX: - phypwr |= PHYPWR_NORMAL_MASK; - break; - case TYPE_EXYNOS4210: - phypwr |= PHYPWR_NORMAL_MASK_PHY0; - default: - break; - } - - /* Disable analog and otg block power */ - writel(phypwr, regs + SAMSUNG_PHYPWR); -} - -/* - * The function passed to the usb driver for phy initialization - */ -static int samsung_usbphy_init(struct usb_phy *phy) -{ - struct samsung_usbphy *sphy; - struct usb_bus *host = NULL; - unsigned long flags; - int ret = 0; - - sphy = phy_to_sphy(phy); - - host = phy->otg->host; - - /* Enable the phy clock */ - ret = clk_prepare_enable(sphy->clk); - if (ret) { - dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); - return ret; - } - - spin_lock_irqsave(&sphy->lock, flags); - - if (host) { - /* setting default phy-type for USB 2.0 */ - if (!strstr(dev_name(host->controller), "ehci") || - !strstr(dev_name(host->controller), "ohci")) - samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST); - } else { - samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE); - } - - /* Disable phy isolation */ - if (sphy->plat && sphy->plat->pmu_isolation) - sphy->plat->pmu_isolation(false); - else - samsung_usbphy_set_isolation(sphy, false); - - /* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */ - samsung_usbphy_cfg_sel(sphy); - - /* Initialize usb phy registers */ - if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) - samsung_exynos5_usbphy_enable(sphy); - else - samsung_usbphy_enable(sphy); - - spin_unlock_irqrestore(&sphy->lock, flags); - - /* Disable the phy clock */ - clk_disable_unprepare(sphy->clk); - - return ret; -} - -/* - * The function passed to the usb driver for phy shutdown - */ -static void samsung_usbphy_shutdown(struct usb_phy *phy) -{ - struct samsung_usbphy *sphy; - struct usb_bus *host = NULL; - unsigned long flags; - - sphy = phy_to_sphy(phy); - - host = phy->otg->host; - - if (clk_prepare_enable(sphy->clk)) { - dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); - return; - } - - spin_lock_irqsave(&sphy->lock, flags); - - if (host) { - /* setting default phy-type for USB 2.0 */ - if (!strstr(dev_name(host->controller), "ehci") || - !strstr(dev_name(host->controller), "ohci")) - samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST); - } else { - samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE); - } - - /* De-initialize usb phy registers */ - if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) - samsung_exynos5_usbphy_disable(sphy); - else - samsung_usbphy_disable(sphy); - - /* Enable phy isolation */ - if (sphy->plat && sphy->plat->pmu_isolation) - sphy->plat->pmu_isolation(true); - else - samsung_usbphy_set_isolation(sphy, true); - - spin_unlock_irqrestore(&sphy->lock, flags); - - clk_disable_unprepare(sphy->clk); -} - -static const struct of_device_id samsung_usbphy_dt_match[]; - -static inline const struct samsung_usbphy_drvdata -*samsung_usbphy_get_driver_data(struct platform_device *pdev) -{ - if (pdev->dev.of_node) { - const struct of_device_id *match; - match = of_match_node(samsung_usbphy_dt_match, - pdev->dev.of_node); - return match->data; - } - - return (struct samsung_usbphy_drvdata *) - platform_get_device_id(pdev)->driver_data; -} - -static int samsung_usbphy_probe(struct platform_device *pdev) -{ - struct samsung_usbphy *sphy; - struct usb_otg *otg; - struct samsung_usbphy_data *pdata = pdev->dev.platform_data; - const struct samsung_usbphy_drvdata *drv_data; - struct device *dev = &pdev->dev; - struct resource *phy_mem; - void __iomem *phy_base; - struct clk *clk; - int ret; - - phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!phy_mem) { - dev_err(dev, "%s: missing mem resource\n", __func__); - return -ENODEV; - } - - phy_base = devm_ioremap_resource(dev, phy_mem); - if (IS_ERR(phy_base)) - return PTR_ERR(phy_base); - - sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL); - if (!sphy) - return -ENOMEM; - - otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL); - if (!otg) - return -ENOMEM; - - drv_data = samsung_usbphy_get_driver_data(pdev); - - if (drv_data->cpu_type == TYPE_EXYNOS5250) - clk = devm_clk_get(dev, "usbhost"); - else - clk = devm_clk_get(dev, "otg"); - - if (IS_ERR(clk)) { - dev_err(dev, "Failed to get otg clock\n"); - return PTR_ERR(clk); - } - - sphy->dev = dev; - - if (dev->of_node) { - ret = samsung_usbphy_parse_dt(sphy); - if (ret < 0) - return ret; - } else { - if (!pdata) { - dev_err(dev, "no platform data specified\n"); - return -EINVAL; - } - } - - sphy->plat = pdata; - sphy->regs = phy_base; - sphy->clk = clk; - sphy->drv_data = drv_data; - sphy->phy.dev = sphy->dev; - sphy->phy.label = "samsung-usbphy"; - sphy->phy.init = samsung_usbphy_init; - sphy->phy.shutdown = samsung_usbphy_shutdown; - sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy); - - sphy->phy.otg = otg; - sphy->phy.otg->phy = &sphy->phy; - sphy->phy.otg->set_host = samsung_usbphy_set_host; - - spin_lock_init(&sphy->lock); - - platform_set_drvdata(pdev, sphy); - - return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2); -} - -static int samsung_usbphy_remove(struct platform_device *pdev) -{ - struct samsung_usbphy *sphy = platform_get_drvdata(pdev); - - usb_remove_phy(&sphy->phy); - - if (sphy->pmuregs) - iounmap(sphy->pmuregs); - if (sphy->sysreg) - iounmap(sphy->sysreg); - - return 0; -} - -static const struct samsung_usbphy_drvdata usbphy_s3c64xx = { - .cpu_type = TYPE_S3C64XX, - .devphy_en_mask = S3C64XX_USBPHY_ENABLE, -}; - -static const struct samsung_usbphy_drvdata usbphy_exynos4 = { - .cpu_type = TYPE_EXYNOS4210, - .devphy_en_mask = EXYNOS_USBPHY_ENABLE, - .hostphy_en_mask = EXYNOS_USBPHY_ENABLE, -}; - -static struct samsung_usbphy_drvdata usbphy_exynos5 = { - .cpu_type = TYPE_EXYNOS5250, - .hostphy_en_mask = EXYNOS_USBPHY_ENABLE, - .hostphy_reg_offset = EXYNOS_USBHOST_PHY_CTRL_OFFSET, -}; - -#ifdef CONFIG_OF -static const struct of_device_id samsung_usbphy_dt_match[] = { - { - .compatible = "samsung,s3c64xx-usbphy", - .data = &usbphy_s3c64xx, - }, { - .compatible = "samsung,exynos4210-usbphy", - .data = &usbphy_exynos4, - }, { - .compatible = "samsung,exynos5250-usbphy", - .data = &usbphy_exynos5 - }, - {}, -}; -MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match); -#endif - -static struct platform_device_id samsung_usbphy_driver_ids[] = { - { - .name = "s3c64xx-usbphy", - .driver_data = (unsigned long)&usbphy_s3c64xx, - }, { - .name = "exynos4210-usbphy", - .driver_data = (unsigned long)&usbphy_exynos4, - }, { - .name = "exynos5250-usbphy", - .driver_data = (unsigned long)&usbphy_exynos5, - }, - {}, -}; - -MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids); - -static struct platform_driver samsung_usbphy_driver = { - .probe = samsung_usbphy_probe, - .remove = samsung_usbphy_remove, - .id_table = samsung_usbphy_driver_ids, - .driver = { - .name = "samsung-usbphy", - .owner = THIS_MODULE, - .of_match_table = of_match_ptr(samsung_usbphy_dt_match), - }, -}; - -module_platform_driver(samsung_usbphy_driver); - -MODULE_DESCRIPTION("Samsung USB phy controller"); -MODULE_AUTHOR("Praveen Paneri <p.paneri@samsung.com>"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:samsung-usbphy"); diff --git a/drivers/usb/renesas_usbhs/Kconfig b/drivers/usb/renesas_usbhs/Kconfig index 29feb00d7f39..019bf7e49ee6 100644 --- a/drivers/usb/renesas_usbhs/Kconfig +++ b/drivers/usb/renesas_usbhs/Kconfig @@ -4,7 +4,7 @@ config USB_RENESAS_USBHS tristate 'Renesas USBHS controller' - depends on USB && USB_GADGET && GENERIC_HARDIRQS + depends on USB_GADGET && GENERIC_HARDIRQS default n help Renesas USBHS is a discrete USB host and peripheral controller chip diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index 9538f0feafe2..45b94019aec8 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -32,7 +32,6 @@ */ void usbhs_pkt_init(struct usbhs_pkt *pkt) { - pkt->dma = DMA_ADDR_INVALID; INIT_LIST_HEAD(&pkt->node); } diff --git a/drivers/usb/renesas_usbhs/fifo.h b/drivers/usb/renesas_usbhs/fifo.h index c31731a843d1..a168a1760fce 100644 --- a/drivers/usb/renesas_usbhs/fifo.h +++ b/drivers/usb/renesas_usbhs/fifo.h @@ -23,8 +23,6 @@ #include <asm/dma.h> #include "pipe.h" -#define DMA_ADDR_INVALID (~(dma_addr_t)0) - struct usbhs_fifo { char *name; u32 port; /* xFIFO */ diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 78fca978b2d0..ed4949faa70d 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -230,7 +230,7 @@ static int usbhsg_recip_handler_std_clear_endpoint(struct usbhs_priv *priv, return 0; } -struct usbhsg_recip_handle req_clear_feature = { +static struct usbhsg_recip_handle req_clear_feature = { .name = "clear feature", .device = usbhsg_recip_handler_std_control_done, .interface = usbhsg_recip_handler_std_control_done, @@ -271,7 +271,7 @@ static int usbhsg_recip_handler_std_set_endpoint(struct usbhs_priv *priv, return 0; } -struct usbhsg_recip_handle req_set_feature = { +static struct usbhsg_recip_handle req_set_feature = { .name = "set feature", .device = usbhsg_recip_handler_std_set_device, .interface = usbhsg_recip_handler_std_control_done, @@ -372,7 +372,7 @@ static int usbhsg_recip_handler_std_get_endpoint(struct usbhs_priv *priv, return 0; } -struct usbhsg_recip_handle req_get_status = { +static struct usbhsg_recip_handle req_get_status = { .name = "get status", .device = usbhsg_recip_handler_std_get_device, .interface = usbhsg_recip_handler_std_get_interface, @@ -845,7 +845,6 @@ static int usbhsg_gadget_start(struct usb_gadget *gadget, /* first hook up the driver ... */ gpriv->driver = driver; - gpriv->gadget.dev.driver = &driver->driver; return usbhsg_try_start(priv, USBHSG_STATUS_REGISTERD); } @@ -861,7 +860,6 @@ static int usbhsg_gadget_stop(struct usb_gadget *gadget, return -EINVAL; usbhsg_try_stop(priv, USBHSG_STATUS_REGISTERD); - gpriv->gadget.dev.driver = NULL; gpriv->driver = NULL; return 0; @@ -925,11 +923,6 @@ static int usbhsg_stop(struct usbhs_priv *priv) return usbhsg_try_stop(priv, USBHSG_STATUS_STARTED); } -static void usbhs_mod_gadget_release(struct device *pdev) -{ - /* do nothing */ -} - int usbhs_mod_gadget_probe(struct usbhs_priv *priv) { struct usbhsg_gpriv *gpriv; @@ -976,15 +969,10 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv) /* * init gadget */ - dev_set_name(&gpriv->gadget.dev, "gadget"); gpriv->gadget.dev.parent = dev; - gpriv->gadget.dev.release = usbhs_mod_gadget_release; gpriv->gadget.name = "renesas_usbhs_udc"; gpriv->gadget.ops = &usbhsg_gadget_ops; gpriv->gadget.max_speed = USB_SPEED_HIGH; - ret = device_register(&gpriv->gadget.dev); - if (ret < 0) - goto err_add_udc; INIT_LIST_HEAD(&gpriv->gadget.ep_list); @@ -1014,15 +1002,13 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv) ret = usb_add_gadget_udc(dev, &gpriv->gadget); if (ret) - goto err_register; + goto err_add_udc; dev_info(dev, "gadget probed\n"); return 0; -err_register: - device_unregister(&gpriv->gadget.dev); err_add_udc: kfree(gpriv->uep); @@ -1038,8 +1024,6 @@ void usbhs_mod_gadget_remove(struct usbhs_priv *priv) usb_del_gadget_udc(&gpriv->gadget); - device_unregister(&gpriv->gadget.dev); - kfree(gpriv->uep); kfree(gpriv); } diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 17b7f9ae36ad..1d55762afbb1 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -4,7 +4,7 @@ menuconfig USB_SERIAL tristate "USB Serial Converter support" - depends on USB && TTY + depends on TTY ---help--- Say Y here if you have a USB device that provides normal serial ports, or acts like a serial device, and you want to connect it to @@ -667,6 +667,23 @@ config USB_SERIAL_ZIO To compile this driver as a module, choose M here: the module will be called zio. +config USB_SERIAL_WISHBONE + tristate "USB-Wishbone adapter interface driver" + help + Say Y here if you want to use a USB attached Wishbone bus. + + Wishbone is an open hardware SoC bus commonly used in FPGA + designs. Bus access can be serialized using the Etherbone + protocol <http://www.ohwr.org/projects/etherbone-core>. + + This driver is intended to be used with devices which attach + their internal Wishbone bus to a USB serial interface using + the Etherbone protocol. A userspace library is required to + speak the protocol made available by this driver as ttyUSBx. + + To compile this driver as a module, choose M here: the + module will be called wishbone-serial. + config USB_SERIAL_ZTE tristate "ZTE USB serial driver" help diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index eaf5ca14dfeb..cec63fa19104 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -58,6 +58,7 @@ obj-$(CONFIG_USB_SERIAL_SYMBOL) += symbolserial.o obj-$(CONFIG_USB_SERIAL_WWAN) += usb_wwan.o obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o obj-$(CONFIG_USB_SERIAL_VISOR) += visor.o +obj-$(CONFIG_USB_SERIAL_WISHBONE) += wishbone-serial.o obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o obj-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda.o obj-$(CONFIG_USB_SERIAL_VIVOPAY_SERIAL) += vivopay-serial.o diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 4775f8209e55..3b16118cbf62 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -62,7 +62,6 @@ static int is_irda(struct usb_serial *serial) } struct ark3116_private { - struct async_icount icount; int irda; /* 1 for irda device */ /* protects hw register updates */ @@ -341,18 +340,15 @@ static void ark3116_close(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; - if (serial->dev) { - /* disable DMA */ - ark3116_write_reg(serial, UART_FCR, 0); - - /* deactivate interrupts */ - ark3116_write_reg(serial, UART_IER, 0); + /* disable DMA */ + ark3116_write_reg(serial, UART_FCR, 0); - usb_serial_generic_close(port); - if (serial->num_interrupt_in) - usb_kill_urb(port->interrupt_in_urb); - } + /* deactivate interrupts */ + ark3116_write_reg(serial, UART_IER, 0); + usb_serial_generic_close(port); + if (serial->num_interrupt_in) + usb_kill_urb(port->interrupt_in_urb); } static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port) @@ -405,31 +401,10 @@ err_out: return result; } -static int ark3116_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - struct usb_serial_port *port = tty->driver_data; - struct ark3116_private *priv = usb_get_serial_port_data(port); - struct async_icount cnow = priv->icount; - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - return 0; -} - static int ark3116_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; - struct ark3116_private *priv = usb_get_serial_port_data(port); struct serial_struct serstruct; void __user *user_arg = (void __user *)arg; @@ -451,33 +426,6 @@ static int ark3116_ioctl(struct tty_struct *tty, if (copy_from_user(&serstruct, user_arg, sizeof(serstruct))) return -EFAULT; return 0; - case TIOCMIWAIT: - for (;;) { - struct async_icount prev = priv->icount; - interruptible_sleep_on(&port->delta_msr_wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - - if (port->serial->disconnected) - return -EIO; - - if ((prev.rng == priv->icount.rng) && - (prev.dsr == priv->icount.dsr) && - (prev.dcd == priv->icount.dcd) && - (prev.cts == priv->icount.cts)) - return -EIO; - if ((arg & TIOCM_RNG && - (prev.rng != priv->icount.rng)) || - (arg & TIOCM_DSR && - (prev.dsr != priv->icount.dsr)) || - (arg & TIOCM_CD && - (prev.dcd != priv->icount.dcd)) || - (arg & TIOCM_CTS && - (prev.cts != priv->icount.cts))) - return 0; - } - break; } return -ENOIOCTLCMD; @@ -575,14 +523,14 @@ static void ark3116_update_msr(struct usb_serial_port *port, __u8 msr) if (msr & UART_MSR_ANY_DELTA) { /* update input line counters */ if (msr & UART_MSR_DCTS) - priv->icount.cts++; + port->icount.cts++; if (msr & UART_MSR_DDSR) - priv->icount.dsr++; + port->icount.dsr++; if (msr & UART_MSR_DDCD) - priv->icount.dcd++; + port->icount.dcd++; if (msr & UART_MSR_TERI) - priv->icount.rng++; - wake_up_interruptible(&port->delta_msr_wait); + port->icount.rng++; + wake_up_interruptible(&port->port.delta_msr_wait); } } @@ -598,13 +546,13 @@ static void ark3116_update_lsr(struct usb_serial_port *port, __u8 lsr) if (lsr&UART_LSR_BRK_ERROR_BITS) { if (lsr & UART_LSR_BI) - priv->icount.brk++; + port->icount.brk++; if (lsr & UART_LSR_FE) - priv->icount.frame++; + port->icount.frame++; if (lsr & UART_LSR_PE) - priv->icount.parity++; + port->icount.parity++; if (lsr & UART_LSR_OE) - priv->icount.overrun++; + port->icount.overrun++; } } @@ -722,7 +670,8 @@ static struct usb_serial_driver ark3116_device = { .ioctl = ark3116_ioctl, .tiocmget = ark3116_tiocmget, .tiocmset = ark3116_tiocmset, - .get_icount = ark3116_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .open = ark3116_open, .close = ark3116_close, .break_ctl = ark3116_break_ctl, diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c index 37decb13d7eb..3c4db6d196c6 100644 --- a/drivers/usb/serial/bus.c +++ b/drivers/usb/serial/bus.c @@ -106,14 +106,15 @@ static int usb_serial_device_remove(struct device *dev) /* make sure suspend/resume doesn't race against port_remove */ usb_autopm_get_interface(port->serial->interface); + minor = port->number; + tty_unregister_device(usb_serial_tty_driver, minor); + device_remove_file(&port->dev, &dev_attr_port_number); driver = port->serial->type; if (driver->port_remove) retval = driver->port_remove(port); - minor = port->number; - tty_unregister_device(usb_serial_tty_driver, minor); dev_info(dev, "%s converter now disconnected from ttyUSB%d\n", driver->description, minor); diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 07d4650a32ab..c2a4171ab9cb 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -296,7 +296,6 @@ static void ch341_dtr_rts(struct usb_serial_port *port, int on) priv->line_control &= ~(CH341_BIT_RTS | CH341_BIT_DTR); spin_unlock_irqrestore(&priv->lock, flags); ch341_set_handshake(port->serial->dev, priv->line_control); - wake_up_interruptible(&port->delta_msr_wait); } static void ch341_close(struct usb_serial_port *port) @@ -489,7 +488,7 @@ static void ch341_read_int_callback(struct urb *urb) tty_kref_put(tty); } - wake_up_interruptible(&port->delta_msr_wait); + wake_up_interruptible(&port->port.delta_msr_wait); } exit: @@ -500,8 +499,9 @@ exit: __func__, status); } -static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) +static int ch341_tiocmiwait(struct tty_struct *tty, unsigned long arg) { + struct usb_serial_port *port = tty->driver_data; struct ch341_private *priv = usb_get_serial_port_data(port); unsigned long flags; u8 prevstatus; @@ -515,7 +515,7 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) spin_unlock_irqrestore(&priv->lock, flags); while (!multi_change) { - interruptible_sleep_on(&port->delta_msr_wait); + interruptible_sleep_on(&port->port.delta_msr_wait); /* see if a signal did it */ if (signal_pending(current)) return -ERESTARTSYS; @@ -542,26 +542,6 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) return 0; } -static int ch341_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct usb_serial_port *port = tty->driver_data; - - dev_dbg(&port->dev, "%s (%d) cmd = 0x%04x\n", __func__, port->number, cmd); - - switch (cmd) { - case TIOCMIWAIT: - dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__, port->number); - return wait_modem_info(port, arg); - - default: - dev_dbg(&port->dev, "%s not supported = 0x%04x\n", __func__, cmd); - break; - } - - return -ENOIOCTLCMD; -} - static int ch341_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; @@ -611,11 +591,11 @@ static struct usb_serial_driver ch341_device = { .dtr_rts = ch341_dtr_rts, .carrier_raised = ch341_carrier_raised, .close = ch341_close, - .ioctl = ch341_ioctl, .set_termios = ch341_set_termios, .break_ctl = ch341_break_ctl, .tiocmget = ch341_tiocmget, .tiocmset = ch341_tiocmset, + .tiocmiwait = ch341_tiocmiwait, .read_int_callback = ch341_read_int_callback, .port_probe = ch341_port_probe, .port_remove = ch341_port_remove, diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 4747d1c328ff..2c659553c07c 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -462,11 +462,7 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port) static void cp210x_close(struct usb_serial_port *port) { usb_serial_generic_close(port); - - mutex_lock(&port->serial->disc_mutex); - if (!port->serial->disconnected) - cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE); - mutex_unlock(&port->serial->disc_mutex); + cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE); } /* diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 629bd2894506..781426230d69 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -51,7 +51,6 @@ #define CYBERJACK_PRODUCT_ID 0x0100 /* Function prototypes */ -static void cyberjack_disconnect(struct usb_serial *serial); static int cyberjack_port_probe(struct usb_serial_port *port); static int cyberjack_port_remove(struct usb_serial_port *port); static int cyberjack_open(struct tty_struct *tty, @@ -79,7 +78,6 @@ static struct usb_serial_driver cyberjack_device = { .description = "Reiner SCT Cyberjack USB card reader", .id_table = id_table, .num_ports = 1, - .disconnect = cyberjack_disconnect, .port_probe = cyberjack_port_probe, .port_remove = cyberjack_port_remove, .open = cyberjack_open, @@ -130,20 +128,14 @@ static int cyberjack_port_remove(struct usb_serial_port *port) { struct cyberjack_private *priv; + usb_kill_urb(port->interrupt_in_urb); + priv = usb_get_serial_port_data(port); kfree(priv); return 0; } -static void cyberjack_disconnect(struct usb_serial *serial) -{ - int i; - - for (i = 0; i < serial->num_ports; ++i) - usb_kill_urb(serial->port[i]->interrupt_in_urb); -} - static int cyberjack_open(struct tty_struct *tty, struct usb_serial_port *port) { @@ -166,11 +158,8 @@ static int cyberjack_open(struct tty_struct *tty, static void cyberjack_close(struct usb_serial_port *port) { - if (port->serial->dev) { - /* shutdown any bulk reads that might be going on */ - usb_kill_urb(port->write_urb); - usb_kill_urb(port->read_urb); - } + usb_kill_urb(port->write_urb); + usb_kill_urb(port->read_urb); } static int cyberjack_write(struct tty_struct *tty, diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index ba7352e4187e..d341555d37d8 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -129,13 +129,12 @@ static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static void cypress_send(struct usb_serial_port *port); static int cypress_write_room(struct tty_struct *tty); -static int cypress_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg); static void cypress_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); static int cypress_tiocmget(struct tty_struct *tty); static int cypress_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); +static int cypress_tiocmiwait(struct tty_struct *tty, unsigned long arg); static int cypress_chars_in_buffer(struct tty_struct *tty); static void cypress_throttle(struct tty_struct *tty); static void cypress_unthrottle(struct tty_struct *tty); @@ -158,10 +157,10 @@ static struct usb_serial_driver cypress_earthmate_device = { .dtr_rts = cypress_dtr_rts, .write = cypress_write, .write_room = cypress_write_room, - .ioctl = cypress_ioctl, .set_termios = cypress_set_termios, .tiocmget = cypress_tiocmget, .tiocmset = cypress_tiocmset, + .tiocmiwait = cypress_tiocmiwait, .chars_in_buffer = cypress_chars_in_buffer, .throttle = cypress_throttle, .unthrottle = cypress_unthrottle, @@ -184,10 +183,10 @@ static struct usb_serial_driver cypress_hidcom_device = { .dtr_rts = cypress_dtr_rts, .write = cypress_write, .write_room = cypress_write_room, - .ioctl = cypress_ioctl, .set_termios = cypress_set_termios, .tiocmget = cypress_tiocmget, .tiocmset = cypress_tiocmset, + .tiocmiwait = cypress_tiocmiwait, .chars_in_buffer = cypress_chars_in_buffer, .throttle = cypress_throttle, .unthrottle = cypress_unthrottle, @@ -210,10 +209,10 @@ static struct usb_serial_driver cypress_ca42v2_device = { .dtr_rts = cypress_dtr_rts, .write = cypress_write, .write_room = cypress_write_room, - .ioctl = cypress_ioctl, .set_termios = cypress_set_termios, .tiocmget = cypress_tiocmget, .tiocmset = cypress_tiocmset, + .tiocmiwait = cypress_tiocmiwait, .chars_in_buffer = cypress_chars_in_buffer, .throttle = cypress_throttle, .unthrottle = cypress_unthrottle, @@ -633,12 +632,6 @@ static void cypress_close(struct usb_serial_port *port) struct cypress_private *priv = usb_get_serial_port_data(port); unsigned long flags; - /* writing is potentially harmful, lock must be taken */ - mutex_lock(&port->serial->disc_mutex); - if (port->serial->disconnected) { - mutex_unlock(&port->serial->disc_mutex); - return; - } spin_lock_irqsave(&priv->lock, flags); kfifo_reset_out(&priv->write_fifo); spin_unlock_irqrestore(&priv->lock, flags); @@ -650,7 +643,6 @@ static void cypress_close(struct usb_serial_port *port) if (stats) dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n", priv->bytes_in, priv->bytes_out, priv->cmd_count); - mutex_unlock(&port->serial->disc_mutex); } /* cypress_close */ @@ -855,55 +847,43 @@ static int cypress_tiocmset(struct tty_struct *tty, } -static int cypress_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) +static int cypress_tiocmiwait(struct tty_struct *tty, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; struct cypress_private *priv = usb_get_serial_port_data(port); - - dev_dbg(&port->dev, "%s - port %d, cmd 0x%.4x\n", __func__, port->number, cmd); - - switch (cmd) { - /* This code comes from drivers/char/serial.c and ftdi_sio.c */ - case TIOCMIWAIT: - for (;;) { - interruptible_sleep_on(&port->delta_msr_wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - - if (port->serial->disconnected) - return -EIO; - - { - char diff = priv->diff_status; - if (diff == 0) - return -EIO; /* no change => error */ - - /* consume all events */ - priv->diff_status = 0; - - /* return 0 if caller wanted to know about - these bits */ - if (((arg & TIOCM_RNG) && (diff & UART_RI)) || - ((arg & TIOCM_DSR) && (diff & UART_DSR)) || - ((arg & TIOCM_CD) && (diff & UART_CD)) || - ((arg & TIOCM_CTS) && (diff & UART_CTS))) - return 0; - /* otherwise caller can't care less about what - * happened, and so we continue to wait for - * more events. - */ - } - } - return 0; - default: - break; + char diff; + + for (;;) { + interruptible_sleep_on(&port->port.delta_msr_wait); + /* see if a signal did it */ + if (signal_pending(current)) + return -ERESTARTSYS; + + if (port->serial->disconnected) + return -EIO; + + diff = priv->diff_status; + if (diff == 0) + return -EIO; /* no change => error */ + + /* consume all events */ + priv->diff_status = 0; + + /* return 0 if caller wanted to know about + these bits */ + if (((arg & TIOCM_RNG) && (diff & UART_RI)) || + ((arg & TIOCM_DSR) && (diff & UART_DSR)) || + ((arg & TIOCM_CD) && (diff & UART_CD)) || + ((arg & TIOCM_CTS) && (diff & UART_CTS))) + return 0; + /* otherwise caller can't care less about what + * happened, and so we continue to wait for + * more events. + */ } - dev_dbg(&port->dev, "%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h\n", __func__, cmd); - return -ENOIOCTLCMD; -} /* cypress_ioctl */ + return 0; +} static void cypress_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) @@ -1189,7 +1169,7 @@ static void cypress_read_int_callback(struct urb *urb) if (priv->current_status != priv->prev_status) { priv->diff_status |= priv->current_status ^ priv->prev_status; - wake_up_interruptible(&port->delta_msr_wait); + wake_up_interruptible(&port->port.delta_msr_wait); priv->prev_status = priv->current_status; } spin_unlock_irqrestore(&priv->lock, flags); diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 31191581060c..7b807d389527 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -196,7 +196,6 @@ struct digi_port { unsigned char dp_out_buf[DIGI_OUT_BUF_SIZE]; int dp_write_urb_in_use; unsigned int dp_modem_signals; - wait_queue_head_t dp_modem_change_wait; int dp_transmit_idle; wait_queue_head_t dp_transmit_idle_wait; int dp_throttled; @@ -1138,53 +1137,51 @@ static void digi_close(struct usb_serial_port *port) if (port->serial->disconnected) goto exit; - if (port->serial->dev) { - /* FIXME: Transmit idle belongs in the wait_unti_sent path */ - digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT); - - /* disable input flow control */ - buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL; - buf[1] = priv->dp_port_num; - buf[2] = DIGI_DISABLE; - buf[3] = 0; - - /* disable output flow control */ - buf[4] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL; - buf[5] = priv->dp_port_num; - buf[6] = DIGI_DISABLE; - buf[7] = 0; - - /* disable reading modem signals automatically */ - buf[8] = DIGI_CMD_READ_INPUT_SIGNALS; - buf[9] = priv->dp_port_num; - buf[10] = DIGI_DISABLE; - buf[11] = 0; - - /* disable receive */ - buf[12] = DIGI_CMD_RECEIVE_ENABLE; - buf[13] = priv->dp_port_num; - buf[14] = DIGI_DISABLE; - buf[15] = 0; - - /* flush fifos */ - buf[16] = DIGI_CMD_IFLUSH_FIFO; - buf[17] = priv->dp_port_num; - buf[18] = DIGI_FLUSH_TX | DIGI_FLUSH_RX; - buf[19] = 0; - - ret = digi_write_oob_command(port, buf, 20, 0); - if (ret != 0) - dev_dbg(&port->dev, "digi_close: write oob failed, ret=%d\n", ret); - - /* wait for final commands on oob port to complete */ - prepare_to_wait(&priv->dp_flush_wait, &wait, - TASK_INTERRUPTIBLE); - schedule_timeout(DIGI_CLOSE_TIMEOUT); - finish_wait(&priv->dp_flush_wait, &wait); - - /* shutdown any outstanding bulk writes */ - usb_kill_urb(port->write_urb); - } + /* FIXME: Transmit idle belongs in the wait_unti_sent path */ + digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT); + + /* disable input flow control */ + buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL; + buf[1] = priv->dp_port_num; + buf[2] = DIGI_DISABLE; + buf[3] = 0; + + /* disable output flow control */ + buf[4] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL; + buf[5] = priv->dp_port_num; + buf[6] = DIGI_DISABLE; + buf[7] = 0; + + /* disable reading modem signals automatically */ + buf[8] = DIGI_CMD_READ_INPUT_SIGNALS; + buf[9] = priv->dp_port_num; + buf[10] = DIGI_DISABLE; + buf[11] = 0; + + /* disable receive */ + buf[12] = DIGI_CMD_RECEIVE_ENABLE; + buf[13] = priv->dp_port_num; + buf[14] = DIGI_DISABLE; + buf[15] = 0; + + /* flush fifos */ + buf[16] = DIGI_CMD_IFLUSH_FIFO; + buf[17] = priv->dp_port_num; + buf[18] = DIGI_FLUSH_TX | DIGI_FLUSH_RX; + buf[19] = 0; + + ret = digi_write_oob_command(port, buf, 20, 0); + if (ret != 0) + dev_dbg(&port->dev, "digi_close: write oob failed, ret=%d\n", + ret); + /* wait for final commands on oob port to complete */ + prepare_to_wait(&priv->dp_flush_wait, &wait, + TASK_INTERRUPTIBLE); + schedule_timeout(DIGI_CLOSE_TIMEOUT); + finish_wait(&priv->dp_flush_wait, &wait); + + /* shutdown any outstanding bulk writes */ + usb_kill_urb(port->write_urb); exit: spin_lock_irq(&priv->dp_port_lock); priv->dp_write_urb_in_use = 0; @@ -1241,7 +1238,6 @@ static int digi_port_init(struct usb_serial_port *port, unsigned port_num) spin_lock_init(&priv->dp_port_lock); priv->dp_port_num = port_num; - init_waitqueue_head(&priv->dp_modem_change_wait); init_waitqueue_head(&priv->dp_transmit_idle_wait); init_waitqueue_head(&priv->dp_flush_wait); init_waitqueue_head(&priv->dp_close_wait); @@ -1532,7 +1528,6 @@ static int digi_read_oob_callback(struct urb *urb) else priv->dp_modem_signals &= ~TIOCM_CD; - wake_up_interruptible(&priv->dp_modem_change_wait); spin_unlock(&priv->dp_port_lock); } else if (opcode == DIGI_CMD_TRANSMIT_IDLE) { spin_lock(&priv->dp_port_lock); diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index a172ad5c5ce8..090b411d893f 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -110,7 +110,7 @@ static void f81232_process_read_urb(struct urb *urb) line_status = priv->line_status; priv->line_status &= ~UART_STATE_TRANSIENT_MASK; spin_unlock_irqrestore(&priv->lock, flags); - wake_up_interruptible(&port->delta_msr_wait); + wake_up_interruptible(&port->port.delta_msr_wait); if (!urb->actual_length) return; @@ -242,8 +242,9 @@ static int f81232_carrier_raised(struct usb_serial_port *port) return 0; } -static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) +static int f81232_tiocmiwait(struct tty_struct *tty, unsigned long arg) { + struct usb_serial_port *port = tty->driver_data; struct f81232_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned int prevstatus; @@ -255,7 +256,7 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) spin_unlock_irqrestore(&priv->lock, flags); while (1) { - interruptible_sleep_on(&port->delta_msr_wait); + interruptible_sleep_on(&port->port.delta_msr_wait); /* see if a signal did it */ if (signal_pending(current)) return -ERESTARTSYS; @@ -302,11 +303,6 @@ static int f81232_ioctl(struct tty_struct *tty, return -EFAULT; return 0; - - case TIOCMIWAIT: - dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__, - port->number); - return wait_modem_info(port, arg); default: dev_dbg(&port->dev, "%s not supported = 0x%04x\n", __func__, cmd); @@ -358,6 +354,7 @@ static struct usb_serial_driver f81232_device = { .set_termios = f81232_set_termios, .tiocmget = f81232_tiocmget, .tiocmset = f81232_tiocmset, + .tiocmiwait = f81232_tiocmiwait, .process_read_urb = f81232_process_read_urb, .read_int_callback = f81232_read_int_callback, .port_probe = f81232_port_probe, diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 9886180e45f1..242b5776648a 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1,7 +1,7 @@ /* * USB FTDI SIO driver * - * Copyright (C) 2009 - 2010 + * Copyright (C) 2009 - 2013 * Johan Hovold (jhovold@gmail.com) * Copyright (C) 1999 - 2001 * Greg Kroah-Hartman (greg@kroah.com) @@ -55,7 +55,6 @@ static __u16 vendor = FTDI_VID; static __u16 product; struct ftdi_private { - struct kref kref; enum ftdi_chip_type chip_type; /* type of device, either SIO or FT8U232AM */ int baud_base; /* baud base clock for divisor setting */ @@ -68,7 +67,6 @@ struct ftdi_private { */ int flags; /* some ASYNC_xxxx flags are supported */ unsigned long last_dtr_rts; /* saved modem control outputs */ - struct async_icount icount; char prev_status; /* Used for TIOCMIWAIT */ char transmit_empty; /* If transmitter is empty or not */ __u16 interface; /* FT2232C, FT2232H or FT4232H port interface @@ -189,6 +187,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) }, { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) }, { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_BOOST_PID) }, { USB_DEVICE(NEWPORT_VID, NEWPORT_AGILIS_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) }, @@ -870,7 +869,9 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) }, { USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, - { USB_DEVICE(ST_VID, ST_STMCLT1030_PID), + { USB_DEVICE(ST_VID, ST_STMCLT_2232_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(ST_VID, ST_STMCLT_4232_PID), .driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk }, { USB_DEVICE(FTDI_VID, FTDI_RF_R106) }, { USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID), @@ -911,7 +912,6 @@ static int ftdi_sio_probe(struct usb_serial *serial, static int ftdi_sio_port_probe(struct usb_serial_port *port); static int ftdi_sio_port_remove(struct usb_serial_port *port); static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port); -static void ftdi_close(struct usb_serial_port *port); static void ftdi_dtr_rts(struct usb_serial_port *port, int on); static void ftdi_process_read_urb(struct urb *urb); static int ftdi_prepare_write_buffer(struct usb_serial_port *port, @@ -921,8 +921,6 @@ static void ftdi_set_termios(struct tty_struct *tty, static int ftdi_tiocmget(struct tty_struct *tty); static int ftdi_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); -static int ftdi_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount); static int ftdi_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); static void ftdi_break_ctl(struct tty_struct *tty, int break_state); @@ -951,7 +949,6 @@ static struct usb_serial_driver ftdi_sio_device = { .port_probe = ftdi_sio_port_probe, .port_remove = ftdi_sio_port_remove, .open = ftdi_open, - .close = ftdi_close, .dtr_rts = ftdi_dtr_rts, .throttle = usb_serial_generic_throttle, .unthrottle = usb_serial_generic_unthrottle, @@ -959,7 +956,8 @@ static struct usb_serial_driver ftdi_sio_device = { .prepare_write_buffer = ftdi_prepare_write_buffer, .tiocmget = ftdi_tiocmget, .tiocmset = ftdi_tiocmset, - .get_icount = ftdi_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .ioctl = ftdi_ioctl, .set_termios = ftdi_set_termios, .break_ctl = ftdi_break_ctl, @@ -1688,7 +1686,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) return -ENOMEM; } - kref_init(&priv->kref); mutex_init(&priv->cfg_lock); priv->flags = ASYNC_LOW_LATENCY; @@ -1792,20 +1789,24 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial) } /* - * First and second port on STMCLiteadaptors is reserved for JTAG interface - * and the forth port for pio + * First two ports on JTAG adaptors using an FT4232 such as STMicroelectronics's + * ST Micro Connect Lite are reserved for JTAG or other non-UART interfaces and + * can be accessed from userspace. + * The next two ports are enabled as UARTs by default, where port 2 is + * a conventional RS-232 UART. */ static int ftdi_stmclite_probe(struct usb_serial *serial) { struct usb_device *udev = serial->dev; struct usb_interface *interface = serial->interface; - if (interface == udev->actconfig->interface[2]) - return 0; - - dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n"); + if (interface == udev->actconfig->interface[0] || + interface == udev->actconfig->interface[1]) { + dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n"); + return -ENODEV; + } - return -ENODEV; + return 0; } /* @@ -1826,22 +1827,13 @@ static int ftdi_mtxorb_hack_setup(struct usb_serial *serial) return 0; } -static void ftdi_sio_priv_release(struct kref *k) -{ - struct ftdi_private *priv = container_of(k, struct ftdi_private, kref); - - kfree(priv); -} - static int ftdi_sio_port_remove(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); - wake_up_interruptible(&port->delta_msr_wait); - remove_sysfs_attrs(port); - kref_put(&priv->kref, ftdi_sio_priv_release); + kfree(priv); return 0; } @@ -1851,7 +1843,6 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) struct ktermios dummy; struct usb_device *dev = port->serial->dev; struct ftdi_private *priv = usb_get_serial_port_data(port); - int result; /* No error checking for this (will get errors later anyway) */ /* See ftdi_sio.h for description of what is reset */ @@ -1870,12 +1861,7 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) ftdi_set_termios(tty, port, &dummy); } - /* Start reading from the device */ - result = usb_serial_generic_open(tty, port); - if (!result) - kref_get(&priv->kref); - - return result; + return usb_serial_generic_open(tty, port); } static void ftdi_dtr_rts(struct usb_serial_port *port, int on) @@ -1900,19 +1886,6 @@ static void ftdi_dtr_rts(struct usb_serial_port *port, int on) clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); } -/* - * usbserial:__serial_close only calls ftdi_close if the point is open - * - * This only gets called when it is the last close - */ -static void ftdi_close(struct usb_serial_port *port) -{ - struct ftdi_private *priv = usb_get_serial_port_data(port); - - usb_serial_generic_close(port); - kref_put(&priv->kref, ftdi_sio_priv_release); -} - /* The SIO requires the first byte to have: * B0 1 * B1 0 @@ -1940,7 +1913,7 @@ static int ftdi_prepare_write_buffer(struct usb_serial_port *port, c = kfifo_out(&port->write_fifo, &buffer[i + 1], len); if (!c) break; - priv->icount.tx += c; + port->icount.tx += c; buffer[i] = (c << 2) + 1; count += c + 1; } @@ -1948,7 +1921,7 @@ static int ftdi_prepare_write_buffer(struct usb_serial_port *port, } else { count = kfifo_out_locked(&port->write_fifo, dest, size, &port->lock); - priv->icount.tx += count; + port->icount.tx += count; } return count; @@ -1977,15 +1950,15 @@ static int ftdi_process_packet(struct usb_serial_port *port, char diff_status = status ^ priv->prev_status; if (diff_status & FTDI_RS0_CTS) - priv->icount.cts++; + port->icount.cts++; if (diff_status & FTDI_RS0_DSR) - priv->icount.dsr++; + port->icount.dsr++; if (diff_status & FTDI_RS0_RI) - priv->icount.rng++; + port->icount.rng++; if (diff_status & FTDI_RS0_RLSD) - priv->icount.dcd++; + port->icount.dcd++; - wake_up_interruptible(&port->delta_msr_wait); + wake_up_interruptible(&port->port.delta_msr_wait); priv->prev_status = status; } @@ -1995,18 +1968,18 @@ static int ftdi_process_packet(struct usb_serial_port *port, * over framing errors */ if (packet[1] & FTDI_RS_BI) { flag = TTY_BREAK; - priv->icount.brk++; + port->icount.brk++; usb_serial_handle_break(port); } else if (packet[1] & FTDI_RS_PE) { flag = TTY_PARITY; - priv->icount.parity++; + port->icount.parity++; } else if (packet[1] & FTDI_RS_FE) { flag = TTY_FRAME; - priv->icount.frame++; + port->icount.frame++; } /* Overrun is special, not associated with a char */ if (packet[1] & FTDI_RS_OE) { - priv->icount.overrun++; + port->icount.overrun++; tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); } } @@ -2020,7 +1993,7 @@ static int ftdi_process_packet(struct usb_serial_port *port, len -= 2; if (!len) return 0; /* status only */ - priv->icount.rx += len; + port->icount.rx += len; ch = packet + 2; if (port->port.console && port->sysrq) { @@ -2384,34 +2357,10 @@ static int ftdi_tiocmset(struct tty_struct *tty, return update_mctrl(port, set, clear); } -static int ftdi_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - struct usb_serial_port *port = tty->driver_data; - struct ftdi_private *priv = usb_get_serial_port_data(port); - struct async_icount *ic = &priv->icount; - - icount->cts = ic->cts; - icount->dsr = ic->dsr; - icount->rng = ic->rng; - icount->dcd = ic->dcd; - icount->tx = ic->tx; - icount->rx = ic->rx; - icount->frame = ic->frame; - icount->parity = ic->parity; - icount->overrun = ic->overrun; - icount->brk = ic->brk; - icount->buf_overrun = ic->buf_overrun; - return 0; -} - static int ftdi_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; - struct ftdi_private *priv = usb_get_serial_port_data(port); - struct async_icount cnow; - struct async_icount cprev; dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd); @@ -2425,35 +2374,6 @@ static int ftdi_ioctl(struct tty_struct *tty, case TIOCSSERIAL: /* sets serial port data */ return set_serial_info(tty, port, (struct serial_struct __user *) arg); - - /* - * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - * - mask passed in arg for lines of interest - * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) - * Caller should use TIOCGICOUNT to see which one it was. - * - * This code is borrowed from linux/drivers/char/serial.c - */ - case TIOCMIWAIT: - cprev = priv->icount; - for (;;) { - interruptible_sleep_on(&port->delta_msr_wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - - if (port->serial->disconnected) - return -EIO; - - cnow = priv->icount; - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { - return 0; - } - cprev = cnow; - } case TIOCSERGETLSR: return get_lsr_info(port, (struct serial_struct __user *)arg); break; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index e79861eeed4c..98528270c43c 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -74,6 +74,7 @@ #define FTDI_OPENDCC_THROTTLE_PID 0xBFDA #define FTDI_OPENDCC_GATEWAY_PID 0xBFDB #define FTDI_OPENDCC_GBM_PID 0xBFDC +#define FTDI_OPENDCC_GBM_BOOST_PID 0xBFDD /* NZR SEM 16+ USB (http://www.nzr.de) */ #define FTDI_NZR_SEM_USB_PID 0xC1E0 /* NZR SEM-LOG16+ */ @@ -1150,7 +1151,8 @@ * STMicroelectonics */ #define ST_VID 0x0483 -#define ST_STMCLT1030_PID 0x3747 /* ST Micro Connect Lite STMCLT1030 */ +#define ST_STMCLT_2232_PID 0x3746 +#define ST_STMCLT_4232_PID 0x3747 /* * Papouch products (http://www.papouch.com/) diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 81caf5623ee2..b110c573ea85 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -946,16 +946,12 @@ static int garmin_open(struct tty_struct *tty, struct usb_serial_port *port) static void garmin_close(struct usb_serial_port *port) { - struct usb_serial *serial = port->serial; struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); dev_dbg(&port->dev, "%s - port %d - mode=%d state=%d flags=0x%X\n", __func__, port->number, garmin_data_p->mode, garmin_data_p->state, garmin_data_p->flags); - if (!serial) - return; - garmin_clear(garmin_data_p); /* shutdown our urbs */ @@ -1185,17 +1181,11 @@ static void garmin_read_bulk_callback(struct urb *urb) { unsigned long flags; struct usb_serial_port *port = urb->context; - struct usb_serial *serial = port->serial; struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); unsigned char *data = urb->transfer_buffer; int status = urb->status; int retval; - if (!serial) { - dev_dbg(&urb->dev->dev, "%s - bad serial pointer, exiting\n", __func__); - return; - } - if (status) { dev_dbg(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n", __func__, status); diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 4c5c23f1cae5..297665fdd16d 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -1,7 +1,7 @@ /* * USB Serial Converter Generic functions * - * Copyright (C) 2010 - 2011 Johan Hovold (jhovold@gmail.com) + * Copyright (C) 2010 - 2013 Johan Hovold (jhovold@gmail.com) * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com) * * This program is free software; you can redistribute it and/or @@ -45,8 +45,6 @@ struct usb_serial_driver usb_serial_generic_device = { }, .id_table = generic_device_ids, .num_ports = 1, - .disconnect = usb_serial_generic_disconnect, - .release = usb_serial_generic_release, .throttle = usb_serial_generic_throttle, .unthrottle = usb_serial_generic_unthrottle, .resume = usb_serial_generic_resume, @@ -102,32 +100,23 @@ int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port } EXPORT_SYMBOL_GPL(usb_serial_generic_open); -static void generic_cleanup(struct usb_serial_port *port) +void usb_serial_generic_close(struct usb_serial_port *port) { - struct usb_serial *serial = port->serial; unsigned long flags; int i; - if (serial->dev) { - /* shutdown any bulk transfers that might be going on */ - if (port->bulk_out_size) { - for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) - usb_kill_urb(port->write_urbs[i]); + if (port->bulk_out_size) { + for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) + usb_kill_urb(port->write_urbs[i]); - spin_lock_irqsave(&port->lock, flags); - kfifo_reset_out(&port->write_fifo); - spin_unlock_irqrestore(&port->lock, flags); - } - if (port->bulk_in_size) { - for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) - usb_kill_urb(port->read_urbs[i]); - } + spin_lock_irqsave(&port->lock, flags); + kfifo_reset_out(&port->write_fifo); + spin_unlock_irqrestore(&port->lock, flags); + } + if (port->bulk_in_size) { + for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) + usb_kill_urb(port->read_urbs[i]); } -} - -void usb_serial_generic_close(struct usb_serial_port *port) -{ - generic_cleanup(port); } EXPORT_SYMBOL_GPL(usb_serial_generic_close); @@ -272,8 +261,7 @@ static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port, if (!test_and_clear_bit(index, &port->read_urbs_free)) return 0; - dev_dbg(&port->dev, "%s - port %d, urb %d\n", __func__, - port->number, index); + dev_dbg(&port->dev, "%s - urb %d\n", __func__, index); res = usb_submit_urb(port->read_urbs[index], mem_flags); if (res) { @@ -347,8 +335,8 @@ void usb_serial_generic_read_bulk_callback(struct urb *urb) } set_bit(i, &port->read_urbs_free); - dev_dbg(&port->dev, "%s - port %d, urb %d, len %d\n", - __func__, port->number, i, urb->actual_length); + dev_dbg(&port->dev, "%s - urb %d, len %d\n", __func__, i, + urb->actual_length); if (urb->status) { dev_dbg(&port->dev, "%s - non-zero urb status: %d\n", @@ -430,6 +418,91 @@ void usb_serial_generic_unthrottle(struct tty_struct *tty) } EXPORT_SYMBOL_GPL(usb_serial_generic_unthrottle); +static bool usb_serial_generic_msr_changed(struct tty_struct *tty, + unsigned long arg, struct async_icount *cprev) +{ + struct usb_serial_port *port = tty->driver_data; + struct async_icount cnow; + unsigned long flags; + bool ret; + + /* + * Use tty-port initialised flag to detect all hangups including the + * one generated at USB-device disconnect. + * + * FIXME: Remove hupping check once tty_port_hangup calls shutdown + * (which clears the initialised flag) before wake up. + */ + if (test_bit(TTY_HUPPING, &tty->flags)) + return true; + if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) + return true; + + spin_lock_irqsave(&port->lock, flags); + cnow = port->icount; /* atomic copy*/ + spin_unlock_irqrestore(&port->lock, flags); + + ret = ((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev->dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev->cts)); + + *cprev = cnow; + + return ret; +} + +int usb_serial_generic_tiocmiwait(struct tty_struct *tty, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + struct async_icount cnow; + unsigned long flags; + int ret; + + spin_lock_irqsave(&port->lock, flags); + cnow = port->icount; /* atomic copy */ + spin_unlock_irqrestore(&port->lock, flags); + + ret = wait_event_interruptible(port->port.delta_msr_wait, + usb_serial_generic_msr_changed(tty, arg, &cnow)); + if (!ret) { + if (test_bit(TTY_HUPPING, &tty->flags)) + ret = -EIO; + if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) + ret = -EIO; + } + + return ret; +} +EXPORT_SYMBOL_GPL(usb_serial_generic_tiocmiwait); + +int usb_serial_generic_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + struct usb_serial_port *port = tty->driver_data; + struct async_icount cnow; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + cnow = port->icount; /* atomic copy */ + spin_unlock_irqrestore(&port->lock, flags); + + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->tx = cnow.tx; + icount->rx = cnow.rx; + icount->frame = cnow.frame; + icount->parity = cnow.parity; + icount->overrun = cnow.overrun; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; + + return 0; +} +EXPORT_SYMBOL_GPL(usb_serial_generic_get_icount); + #ifdef CONFIG_MAGIC_SYSRQ int usb_serial_handle_sysrq_char(struct usb_serial_port *port, unsigned int ch) { @@ -473,8 +546,7 @@ void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port, { struct tty_port *port = &usb_port->port; - dev_dbg(&usb_port->dev, "%s - port %d, status %d\n", __func__, - usb_port->number, status); + dev_dbg(&usb_port->dev, "%s - status %d\n", __func__, status); if (status) wake_up_interruptible(&port->open_wait); @@ -510,17 +582,3 @@ int usb_serial_generic_resume(struct usb_serial *serial) return c ? -EIO : 0; } EXPORT_SYMBOL_GPL(usb_serial_generic_resume); - -void usb_serial_generic_disconnect(struct usb_serial *serial) -{ - int i; - - /* stop reads and writes on all ports */ - for (i = 0; i < serial->num_ports; ++i) - generic_cleanup(serial->port[i]); -} -EXPORT_SYMBOL_GPL(usb_serial_generic_disconnect); - -void usb_serial_generic_release(struct usb_serial *serial) -{ -} diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index cf0b0a2f7b56..1477e8593476 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -111,7 +111,6 @@ struct edgeport_port { wait_queue_head_t wait_open; /* for handling sleeping while waiting for open to finish */ wait_queue_head_t wait_command; /* for handling sleeping while waiting for command to finish */ - struct async_icount icount; struct usb_serial_port *port; /* loop back to the owner of this object */ }; @@ -215,8 +214,6 @@ static void edge_break(struct tty_struct *tty, int break_state); static int edge_tiocmget(struct tty_struct *tty); static int edge_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); -static int edge_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount); static int edge_startup(struct usb_serial *serial); static void edge_disconnect(struct usb_serial *serial); static void edge_release(struct usb_serial *serial); @@ -867,9 +864,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) init_waitqueue_head(&edge_port->wait_chase); init_waitqueue_head(&edge_port->wait_command); - /* initialize our icount structure */ - memset(&(edge_port->icount), 0x00, sizeof(edge_port->icount)); - /* initialize our port settings */ edge_port->txCredits = 0; /* Can't send any data yet */ /* Must always set this bit to enable ints! */ @@ -1296,7 +1290,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, /* decrement the number of credits we have by the number we just sent */ edge_port->txCredits -= count; - edge_port->icount.tx += count; + edge_port->port->icount.tx += count; status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { @@ -1308,7 +1302,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, /* revert the credits as something bad happened. */ edge_port->txCredits += count; - edge_port->icount.tx -= count; + edge_port->port->icount.tx -= count; } dev_dbg(dev, "%s wrote %d byte(s) TxCredit %d, Fifo %d\n", __func__, count, edge_port->txCredits, fifo->count); @@ -1570,31 +1564,6 @@ static int edge_tiocmget(struct tty_struct *tty) return result; } -static int edge_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - struct usb_serial_port *port = tty->driver_data; - struct edgeport_port *edge_port = usb_get_serial_port_data(port); - struct async_icount cnow; - cnow = edge_port->icount; - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - - dev_dbg(&port->dev, "%s (%d) TIOCGICOUNT RX=%d, TX=%d\n", __func__, - port->number, icount->rx, icount->tx); - return 0; -} - static int get_serial_info(struct edgeport_port *edge_port, struct serial_struct __user *retinfo) { @@ -1631,8 +1600,6 @@ static int edge_ioctl(struct tty_struct *tty, struct usb_serial_port *port = tty->driver_data; DEFINE_WAIT(wait); struct edgeport_port *edge_port = usb_get_serial_port_data(port); - struct async_icount cnow; - struct async_icount cprev; dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd); @@ -1644,37 +1611,6 @@ static int edge_ioctl(struct tty_struct *tty, case TIOCGSERIAL: dev_dbg(&port->dev, "%s (%d) TIOCGSERIAL\n", __func__, port->number); return get_serial_info(edge_port, (struct serial_struct __user *) arg); - - case TIOCMIWAIT: - dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__, port->number); - cprev = edge_port->icount; - while (1) { - prepare_to_wait(&port->delta_msr_wait, - &wait, TASK_INTERRUPTIBLE); - schedule(); - finish_wait(&port->delta_msr_wait, &wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - - if (port->serial->disconnected) - return -EIO; - - cnow = edge_port->icount; - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { - return 0; - } - cprev = cnow; - } - /* NOTREACHED */ - break; - } return -ENOIOCTLCMD; } @@ -1848,7 +1784,7 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial, edge_serial->rxPort); edge_tty_recv(edge_port->port, buffer, rxLen); - edge_port->icount.rx += rxLen; + edge_port->port->icount.rx += rxLen; } buffer += rxLen; } @@ -2024,7 +1960,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr) if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) { - icount = &edge_port->icount; + icount = &edge_port->port->icount; /* update input line counters */ if (newMsr & EDGEPORT_MSR_DELTA_CTS) @@ -2035,7 +1971,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr) icount->dcd++; if (newMsr & EDGEPORT_MSR_DELTA_RI) icount->rng++; - wake_up_interruptible(&edge_port->port->delta_msr_wait); + wake_up_interruptible(&edge_port->port->port.delta_msr_wait); } /* Save the new modem status */ @@ -2070,7 +2006,7 @@ static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, edge_tty_recv(edge_port->port, &data, 1); /* update input line counters */ - icount = &edge_port->icount; + icount = &edge_port->port->icount; if (newLsr & LSR_BREAK) icount->brk++; if (newLsr & LSR_OVER_ERR) diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index 1511dd0ad324..ae5fac5656c9 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -116,7 +116,8 @@ static struct usb_serial_driver edgeport_2port_device = { .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, .tiocmset = edge_tiocmset, - .get_icount = edge_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .write = edge_write, .write_room = edge_write_room, .chars_in_buffer = edge_chars_in_buffer, @@ -147,7 +148,8 @@ static struct usb_serial_driver edgeport_4port_device = { .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, .tiocmset = edge_tiocmset, - .get_icount = edge_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .write = edge_write, .write_room = edge_write_room, .chars_in_buffer = edge_chars_in_buffer, @@ -178,7 +180,8 @@ static struct usb_serial_driver edgeport_8port_device = { .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, .tiocmset = edge_tiocmset, - .get_icount = edge_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .write = edge_write, .write_room = edge_write_room, .chars_in_buffer = edge_chars_in_buffer, @@ -209,7 +212,8 @@ static struct usb_serial_driver epic_device = { .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, .tiocmset = edge_tiocmset, - .get_icount = edge_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .write = edge_write, .write_room = edge_write_room, .chars_in_buffer = edge_chars_in_buffer, diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 7777172206de..158bf4bc29cc 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -86,7 +86,7 @@ struct edgeport_port { int baud_rate; int close_pending; int lsr_event; - struct async_icount icount; + struct edgeport_serial *edge_serial; struct usb_serial_port *port; __u8 bUartMode; /* Port type, 0: RS232, etc. */ @@ -206,7 +206,7 @@ static int restart_read(struct edgeport_port *edge_port); static void edge_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios); -static void edge_send(struct tty_struct *tty); +static void edge_send(struct usb_serial_port *port, struct tty_struct *tty); /* sysfs attributes */ static int edge_create_sysfs_attrs(struct usb_serial_port *port); @@ -1445,7 +1445,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr) if (msr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) { - icount = &edge_port->icount; + icount = &edge_port->port->icount; /* update input line counters */ if (msr & EDGEPORT_MSR_DELTA_CTS) @@ -1456,7 +1456,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr) icount->dcd++; if (msr & EDGEPORT_MSR_DELTA_RI) icount->rng++; - wake_up_interruptible(&edge_port->port->delta_msr_wait); + wake_up_interruptible(&edge_port->port->port.delta_msr_wait); } /* Save the new modem status */ @@ -1498,7 +1498,7 @@ static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data, edge_tty_recv(edge_port->port, &data, 1); /* update input line counters */ - icount = &edge_port->icount; + icount = &edge_port->port->icount; if (new_lsr & LSR_BREAK) icount->brk++; if (new_lsr & LSR_OVER_ERR) @@ -1657,7 +1657,7 @@ static void edge_bulk_in_callback(struct urb *urb) else edge_tty_recv(edge_port->port, data, urb->actual_length); - edge_port->icount.rx += urb->actual_length; + edge_port->port->icount.rx += urb->actual_length; } exit: @@ -1712,7 +1712,7 @@ static void edge_bulk_out_callback(struct urb *urb) /* send any buffered data */ tty = tty_port_tty_get(&port->port); - edge_send(tty); + edge_send(port, tty); tty_kref_put(tty); } @@ -1750,8 +1750,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) dev = port->serial->dev; - memset(&(edge_port->icount), 0x00, sizeof(edge_port->icount)); - /* turn off loopback */ status = ti_do_config(edge_port, UMPC_SET_CLR_LOOPBACK, 0); if (status) { @@ -1909,21 +1907,10 @@ static void edge_close(struct usb_serial_port *port) kfifo_reset_out(&edge_port->write_fifo); spin_unlock_irqrestore(&edge_port->ep_lock, flags); - /* assuming we can still talk to the device, - * send a close port command to it */ dev_dbg(&port->dev, "%s - send umpc_close_port\n", __func__); port_number = port->number - port->serial->minor; - - mutex_lock(&serial->disc_mutex); - if (!serial->disconnected) { - send_cmd(serial->dev, - UMPC_CLOSE_PORT, - (__u8)(UMPM_UART1_PORT + port_number), - 0, - NULL, - 0); - } - mutex_unlock(&serial->disc_mutex); + send_cmd(serial->dev, UMPC_CLOSE_PORT, + (__u8)(UMPM_UART1_PORT + port_number), 0, NULL, 0); mutex_lock(&edge_serial->es_lock); --edge_port->edge_serial->num_ports_open; @@ -1953,14 +1940,13 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, count = kfifo_in_locked(&edge_port->write_fifo, data, count, &edge_port->ep_lock); - edge_send(tty); + edge_send(port, tty); return count; } -static void edge_send(struct tty_struct *tty) +static void edge_send(struct usb_serial_port *port, struct tty_struct *tty) { - struct usb_serial_port *port = tty->driver_data; int count, result; struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned long flags; @@ -1999,7 +1985,7 @@ static void edge_send(struct tty_struct *tty) edge_port->ep_write_urb_in_use = 0; /* TODO: reschedule edge_send */ } else - edge_port->icount.tx += count; + edge_port->port->icount.tx += count; /* wakeup any process waiting for writes to complete */ /* there is now more room in the buffer for new writes */ @@ -2360,27 +2346,6 @@ static int edge_tiocmget(struct tty_struct *tty) return result; } -static int edge_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - struct usb_serial_port *port = tty->driver_data; - struct edgeport_port *edge_port = usb_get_serial_port_data(port); - struct async_icount *ic = &edge_port->icount; - - icount->cts = ic->cts; - icount->dsr = ic->dsr; - icount->rng = ic->rng; - icount->dcd = ic->dcd; - icount->tx = ic->tx; - icount->rx = ic->rx; - icount->frame = ic->frame; - icount->parity = ic->parity; - icount->overrun = ic->overrun; - icount->brk = ic->brk; - icount->buf_overrun = ic->buf_overrun; - return 0; -} - static int get_serial_info(struct edgeport_port *edge_port, struct serial_struct __user *retinfo) { @@ -2392,7 +2357,7 @@ static int get_serial_info(struct edgeport_port *edge_port, cwait = edge_port->port->port.closing_wait; if (cwait != ASYNC_CLOSING_WAIT_NONE) - cwait = jiffies_to_msecs(closing_wait) / 10; + cwait = jiffies_to_msecs(cwait) / 10; memset(&tmp, 0, sizeof(tmp)); @@ -2416,8 +2381,6 @@ static int edge_ioctl(struct tty_struct *tty, { struct usb_serial_port *port = tty->driver_data; struct edgeport_port *edge_port = usb_get_serial_port_data(port); - struct async_icount cnow; - struct async_icount cprev; dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd); @@ -2426,32 +2389,6 @@ static int edge_ioctl(struct tty_struct *tty, dev_dbg(&port->dev, "%s - TIOCGSERIAL\n", __func__); return get_serial_info(edge_port, (struct serial_struct __user *) arg); - case TIOCMIWAIT: - dev_dbg(&port->dev, "%s - TIOCMIWAIT\n", __func__); - cprev = edge_port->icount; - while (1) { - interruptible_sleep_on(&port->delta_msr_wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - - if (port->serial->disconnected) - return -EIO; - - cnow = edge_port->icount; - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { - return 0; - } - cprev = cnow; - } - /* not reached */ - break; } return -ENOIOCTLCMD; } @@ -2463,8 +2400,6 @@ static void edge_break(struct tty_struct *tty, int break_state) int status; int bv = 0; /* Off */ - tty_wait_until_sent(tty, 0); - if (break_state == -1) bv = 1; /* On */ status = ti_do_config(edge_port, UMPC_SET_CLR_BREAK, bv); @@ -2546,7 +2481,6 @@ static int edge_port_remove(struct usb_serial_port *port) struct edgeport_port *edge_port; edge_port = usb_get_serial_port_data(port); - edge_remove_sysfs_attrs(port); kfifo_free(&edge_port->write_fifo); kfree(edge_port); @@ -2618,7 +2552,8 @@ static struct usb_serial_driver edgeport_1port_device = { .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, .tiocmset = edge_tiocmset, - .get_icount = edge_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .write = edge_write, .write_room = edge_write_room, .chars_in_buffer = edge_chars_in_buffer, @@ -2649,7 +2584,8 @@ static struct usb_serial_driver edgeport_2port_device = { .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, .tiocmset = edge_tiocmset, - .get_icount = edge_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .write = edge_write, .write_room = edge_write_room, .chars_in_buffer = edge_chars_in_buffer, diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index ff77027160aa..9d74c278b7b5 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -55,7 +55,6 @@ static void read_rxcmd_callback(struct urb *urb); struct iuu_private { spinlock_t lock; /* store irq state */ - wait_queue_head_t delta_msr_wait; u8 line_status; int tiostatus; /* store IUART SIGNAL for tiocmget call */ u8 reset; /* if 1 reset is needed */ @@ -94,7 +93,6 @@ static int iuu_port_probe(struct usb_serial_port *port) priv->vcc = vcc_default; spin_lock_init(&priv->lock); - init_waitqueue_head(&priv->delta_msr_wait); usb_set_serial_port_data(port, priv); @@ -944,22 +942,13 @@ static void iuu_set_termios(struct tty_struct *tty, static void iuu_close(struct usb_serial_port *port) { /* iuu_led (port,255,0,0,0); */ - struct usb_serial *serial; - - serial = port->serial; - if (!serial) - return; iuu_uart_off(port); - if (serial->dev) { - /* free writebuf */ - /* shutdown our urbs */ - dev_dbg(&port->dev, "%s - shutting down urbs\n", __func__); - usb_kill_urb(port->write_urb); - usb_kill_urb(port->read_urb); - usb_kill_urb(port->interrupt_in_urb); - iuu_led(port, 0, 0, 0xF000, 0xFF); - } + + usb_kill_urb(port->write_urb); + usb_kill_urb(port->read_urb); + + iuu_led(port, 0, 0, 0xF000, 0xFF); } static void iuu_init_termios(struct tty_struct *tty) diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index b011478d2e5f..eb30d7b01f36 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -712,45 +712,45 @@ static void usa49wg_indat_callback(struct urb *urb) i = 0; len = 0; - if (urb->actual_length) { - while (i < urb->actual_length) { + while (i < urb->actual_length) { - /* Check port number from message*/ - if (data[i] >= serial->num_ports) { - dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", - __func__, data[i]); - return; - } - port = serial->port[data[i++]]; - len = data[i++]; + /* Check port number from message */ + if (data[i] >= serial->num_ports) { + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", + __func__, data[i]); + return; + } + port = serial->port[data[i++]]; + len = data[i++]; - /* 0x80 bit is error flag */ - if ((data[i] & 0x80) == 0) { - /* no error on any byte */ - i++; - for (x = 1; x < len ; ++x) - tty_insert_flip_char(&port->port, - data[i++], 0); - } else { - /* - * some bytes had errors, every byte has status - */ - for (x = 0; x + 1 < len; x += 2) { - int stat = data[i], flag = 0; - if (stat & RXERROR_OVERRUN) - flag |= TTY_OVERRUN; - if (stat & RXERROR_FRAMING) - flag |= TTY_FRAME; - if (stat & RXERROR_PARITY) - flag |= TTY_PARITY; - /* XXX should handle break (0x10) */ - tty_insert_flip_char(&port->port, - data[i+1], flag); - i += 2; - } + /* 0x80 bit is error flag */ + if ((data[i] & 0x80) == 0) { + /* no error on any byte */ + i++; + for (x = 1; x < len && i < urb->actual_length; ++x) + tty_insert_flip_char(&port->port, + data[i++], 0); + } else { + /* + * some bytes had errors, every byte has status + */ + for (x = 0; x + 1 < len && + i + 1 < urb->actual_length; x += 2) { + int stat = data[i], flag = 0; + + if (stat & RXERROR_OVERRUN) + flag |= TTY_OVERRUN; + if (stat & RXERROR_FRAMING) + flag |= TTY_FRAME; + if (stat & RXERROR_PARITY) + flag |= TTY_PARITY; + /* XXX should handle break (0x10) */ + tty_insert_flip_char(&port->port, data[i+1], + flag); + i += 2; } - tty_flip_buffer_push(&port->port); } + tty_flip_buffer_push(&port->port); } /* Resubmit urb so we continue receiving */ @@ -1092,7 +1092,6 @@ static void keyspan_dtr_rts(struct usb_serial_port *port, int on) static void keyspan_close(struct usb_serial_port *port) { int i; - struct usb_serial *serial = port->serial; struct keyspan_port_private *p_priv; p_priv = usb_get_serial_port_data(port); @@ -1100,28 +1099,17 @@ static void keyspan_close(struct usb_serial_port *port) p_priv->rts_state = 0; p_priv->dtr_state = 0; - if (serial->dev) { - keyspan_send_setup(port, 2); - /* pilot-xfer seems to work best with this delay */ - mdelay(100); - /* keyspan_set_termios(port, NULL); */ - } - - /*while (p_priv->outcont_urb->status == -EINPROGRESS) { - dev_dbg(&port->dev, "%s - urb in progress\n", __func__); - }*/ + keyspan_send_setup(port, 2); + /* pilot-xfer seems to work best with this delay */ + mdelay(100); p_priv->out_flip = 0; p_priv->in_flip = 0; - if (serial->dev) { - /* Stop reading/writing urbs */ - stop_urb(p_priv->inack_urb); - /* stop_urb(p_priv->outcont_urb); */ - for (i = 0; i < 2; i++) { - stop_urb(p_priv->in_urbs[i]); - stop_urb(p_priv->out_urbs[i]); - } + stop_urb(p_priv->inack_urb); + for (i = 0; i < 2; i++) { + stop_urb(p_priv->in_urbs[i]); + stop_urb(p_priv->out_urbs[i]); } } diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 2230223978ca..5f1d382e55cf 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -593,12 +593,10 @@ static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on) { struct usb_serial *serial = port->serial; - if (serial->dev) { - if (on) - keyspan_pda_set_modem_info(serial, (1<<7) | (1<< 2)); - else - keyspan_pda_set_modem_info(serial, 0); - } + if (on) + keyspan_pda_set_modem_info(serial, (1 << 7) | (1 << 2)); + else + keyspan_pda_set_modem_info(serial, 0); } @@ -649,13 +647,8 @@ error: } static void keyspan_pda_close(struct usb_serial_port *port) { - struct usb_serial *serial = port->serial; - - if (serial->dev) { - /* shutdown our bulk reads and writes */ - usb_kill_urb(port->write_urb); - usb_kill_urb(port->interrupt_in_urb); - } + usb_kill_urb(port->write_urb); + usb_kill_urb(port->interrupt_in_urb); } diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 769d910ae0a5..1b4054fe52a5 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -341,28 +341,20 @@ static void klsi_105_close(struct usb_serial_port *port) { int rc; - mutex_lock(&port->serial->disc_mutex); - if (!port->serial->disconnected) { - /* send READ_OFF */ - rc = usb_control_msg(port->serial->dev, - usb_sndctrlpipe(port->serial->dev, 0), - KL5KUSB105A_SIO_CONFIGURE, - USB_TYPE_VENDOR | USB_DIR_OUT, - KL5KUSB105A_SIO_CONFIGURE_READ_OFF, - 0, /* index */ - NULL, 0, - KLSI_TIMEOUT); - if (rc < 0) - dev_err(&port->dev, - "Disabling read failed (error = %d)\n", rc); - } - mutex_unlock(&port->serial->disc_mutex); + /* send READ_OFF */ + rc = usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + KL5KUSB105A_SIO_CONFIGURE, + USB_TYPE_VENDOR | USB_DIR_OUT, + KL5KUSB105A_SIO_CONFIGURE_READ_OFF, + 0, /* index */ + NULL, 0, + KLSI_TIMEOUT); + if (rc < 0) + dev_err(&port->dev, "failed to disable read: %d\n", rc); /* shutdown our bulk reads and writes */ usb_serial_generic_close(port); - - /* wgg - do I need this? I think so. */ - usb_kill_urb(port->interrupt_in_urb); } /* We need to write a complete 64-byte data block and encode the diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 903d938e174b..78b48c31abf5 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -65,7 +65,7 @@ static int kobil_tiocmget(struct tty_struct *tty); static int kobil_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static void kobil_read_int_callback(struct urb *urb); -static void kobil_write_callback(struct urb *purb); +static void kobil_write_int_callback(struct urb *urb); static void kobil_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); static void kobil_init_termios(struct tty_struct *tty); @@ -99,6 +99,7 @@ static struct usb_serial_driver kobil_device = { .write = kobil_write, .write_room = kobil_write_room, .read_int_callback = kobil_read_int_callback, + .write_int_callback = kobil_write_int_callback, }; static struct usb_serial_driver * const serial_drivers[] = { @@ -106,8 +107,6 @@ static struct usb_serial_driver * const serial_drivers[] = { }; struct kobil_private { - int write_int_endpoint_address; - int read_int_endpoint_address; unsigned char buf[KOBIL_BUF_LENGTH]; /* buffer for the APDU to send */ int filled; /* index of the last char in buf */ int cur_pos; /* index of the next char to send in buf */ @@ -117,14 +116,8 @@ struct kobil_private { static int kobil_port_probe(struct usb_serial_port *port) { - int i; struct usb_serial *serial = port->serial; struct kobil_private *priv; - struct usb_device *pdev; - struct usb_host_config *actconfig; - struct usb_interface *interface; - struct usb_host_interface *altsetting; - struct usb_host_endpoint *endpoint; priv = kmalloc(sizeof(struct kobil_private), GFP_KERNEL); if (!priv) @@ -150,30 +143,6 @@ static int kobil_port_probe(struct usb_serial_port *port) } usb_set_serial_port_data(port, priv); - /* search for the necessary endpoints */ - pdev = serial->dev; - actconfig = pdev->actconfig; - interface = actconfig->interface[0]; - altsetting = interface->cur_altsetting; - endpoint = altsetting->endpoint; - - for (i = 0; i < altsetting->desc.bNumEndpoints; i++) { - endpoint = &altsetting->endpoint[i]; - if (usb_endpoint_is_int_out(&endpoint->desc)) { - dev_dbg(&serial->dev->dev, - "%s Found interrupt out endpoint. Address: %d\n", - __func__, endpoint->desc.bEndpointAddress); - priv->write_int_endpoint_address = - endpoint->desc.bEndpointAddress; - } - if (usb_endpoint_is_int_in(&endpoint->desc)) { - dev_dbg(&serial->dev->dev, - "%s Found interrupt in endpoint. Address: %d\n", - __func__, endpoint->desc.bEndpointAddress); - priv->read_int_endpoint_address = - endpoint->desc.bEndpointAddress; - } - } return 0; } @@ -205,7 +174,6 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) struct kobil_private *priv; unsigned char *transfer_buffer; int transfer_buffer_length = 8; - int write_urb_transfer_buffer_length = 8; priv = usb_get_serial_port_data(port); @@ -214,27 +182,6 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) if (!transfer_buffer) return -ENOMEM; - /* allocate write_urb */ - if (!port->write_urb) { - dev_dbg(dev, "%s - Allocating port->write_urb\n", __func__); - port->write_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!port->write_urb) { - dev_dbg(dev, "%s - usb_alloc_urb failed\n", __func__); - kfree(transfer_buffer); - return -ENOMEM; - } - } - - /* allocate memory for write_urb transfer buffer */ - port->write_urb->transfer_buffer = - kmalloc(write_urb_transfer_buffer_length, GFP_KERNEL); - if (!port->write_urb->transfer_buffer) { - kfree(transfer_buffer); - usb_free_urb(port->write_urb); - port->write_urb = NULL; - return -ENOMEM; - } - /* get hardware version */ result = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), @@ -310,12 +257,7 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) static void kobil_close(struct usb_serial_port *port) { /* FIXME: Add rts/dtr methods */ - if (port->write_urb) { - usb_poison_urb(port->write_urb); - kfree(port->write_urb->transfer_buffer); - usb_free_urb(port->write_urb); - port->write_urb = NULL; - } + usb_kill_urb(port->interrupt_out_urb); usb_kill_urb(port->interrupt_in_urb); } @@ -333,24 +275,8 @@ static void kobil_read_int_callback(struct urb *urb) } if (urb->actual_length) { - - /* BEGIN DEBUG */ - /* - char *dbg_data; - - dbg_data = kzalloc((3 * purb->actual_length + 10) - * sizeof(char), GFP_KERNEL); - if (! dbg_data) { - return; - } - for (i = 0; i < purb->actual_length; i++) { - sprintf(dbg_data +3*i, "%02X ", data[i]); - } - dev_dbg(&port->dev, " <-- %s\n", dbg_data); - kfree(dbg_data); - */ - /* END DEBUG */ - + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, + data); tty_insert_flip_string(&port->port, data, urb->actual_length); tty_flip_buffer_push(&port->port); } @@ -360,7 +286,7 @@ static void kobil_read_int_callback(struct urb *urb) } -static void kobil_write_callback(struct urb *purb) +static void kobil_write_int_callback(struct urb *urb) { } @@ -403,23 +329,14 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, while (todo > 0) { /* max 8 byte in one urb (endpoint size) */ - length = (todo < 8) ? todo : 8; + length = min(todo, port->interrupt_out_size); /* copy data to transfer buffer */ - memcpy(port->write_urb->transfer_buffer, + memcpy(port->interrupt_out_buffer, priv->buf + priv->cur_pos, length); - usb_fill_int_urb(port->write_urb, - port->serial->dev, - usb_sndintpipe(port->serial->dev, - priv->write_int_endpoint_address), - port->write_urb->transfer_buffer, - length, - kobil_write_callback, - port, - 8 - ); + port->interrupt_out_urb->transfer_buffer_length = length; priv->cur_pos = priv->cur_pos + length; - result = usb_submit_urb(port->write_urb, GFP_NOIO); + result = usb_submit_urb(port->interrupt_out_urb, GFP_NOIO); dev_dbg(&port->dev, "%s - Send write URB returns: %i\n", __func__, result); todo = priv->filled - priv->cur_pos; diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 06d5a60be2c4..6a15adf53360 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -35,7 +35,6 @@ #include <linux/usb.h> #include <linux/usb/serial.h> #include <linux/serial.h> -#include <linux/ioctl.h> #include "mct_u232.h" #define DRIVER_AUTHOR "Wolfgang Grandegger <wolfgang@ces.ch>" @@ -44,7 +43,6 @@ /* * Function prototypes */ -static int mct_u232_startup(struct usb_serial *serial); static int mct_u232_port_probe(struct usb_serial_port *port); static int mct_u232_port_remove(struct usb_serial_port *remove); static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port); @@ -57,10 +55,6 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state); static int mct_u232_tiocmget(struct tty_struct *tty); static int mct_u232_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); -static int mct_u232_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg); -static int mct_u232_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount); static void mct_u232_throttle(struct tty_struct *tty); static void mct_u232_unthrottle(struct tty_struct *tty); @@ -95,11 +89,10 @@ static struct usb_serial_driver mct_u232_device = { .break_ctl = mct_u232_break_ctl, .tiocmget = mct_u232_tiocmget, .tiocmset = mct_u232_tiocmset, - .attach = mct_u232_startup, + .tiocmiwait = usb_serial_generic_tiocmiwait, .port_probe = mct_u232_port_probe, .port_remove = mct_u232_port_remove, - .ioctl = mct_u232_ioctl, - .get_icount = mct_u232_get_icount, + .get_icount = usb_serial_generic_get_icount, }; static struct usb_serial_driver * const serial_drivers[] = { @@ -107,13 +100,13 @@ static struct usb_serial_driver * const serial_drivers[] = { }; struct mct_u232_private { + struct urb *read_urb; spinlock_t lock; unsigned int control_state; /* Modem Line Setting (TIOCM) */ unsigned char last_lcr; /* Line Control Register */ unsigned char last_lsr; /* Line Status Register */ unsigned char last_msr; /* Modem Status Register */ unsigned int rx_flags; /* Throttling flags */ - struct async_icount icount; }; #define THROTTLED 0x01 @@ -382,22 +375,6 @@ static void mct_u232_msr_to_state(struct usb_serial_port *port, * Driver's tty interface functions */ -static int mct_u232_startup(struct usb_serial *serial) -{ - struct usb_serial_port *port, *rport; - - /* Puh, that's dirty */ - port = serial->port[0]; - rport = serial->port[1]; - /* No unlinking, it wasn't submitted yet. */ - usb_free_urb(port->read_urb); - port->read_urb = rport->interrupt_in_urb; - rport->interrupt_in_urb = NULL; - port->read_urb->context = port; - - return 0; -} /* mct_u232_startup */ - static int mct_u232_port_probe(struct usb_serial_port *port) { struct mct_u232_private *priv; @@ -406,6 +383,10 @@ static int mct_u232_port_probe(struct usb_serial_port *port) if (!priv) return -ENOMEM; + /* Use second interrupt-in endpoint for reading. */ + priv->read_urb = port->serial->port[1]->interrupt_in_urb; + priv->read_urb->context = port; + spin_lock_init(&priv->lock); usb_set_serial_port_data(port, priv); @@ -469,17 +450,17 @@ static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port) mct_u232_msr_to_state(port, &priv->control_state, priv->last_msr); spin_unlock_irqrestore(&priv->lock, flags); - retval = usb_submit_urb(port->read_urb, GFP_KERNEL); + retval = usb_submit_urb(priv->read_urb, GFP_KERNEL); if (retval) { dev_err(&port->dev, - "usb_submit_urb(read bulk) failed pipe 0x%x err %d\n", + "usb_submit_urb(read) failed pipe 0x%x err %d\n", port->read_urb->pipe, retval); goto error; } retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (retval) { - usb_kill_urb(port->read_urb); + usb_kill_urb(priv->read_urb); dev_err(&port->dev, "usb_submit_urb(read int) failed pipe 0x%x err %d", port->interrupt_in_urb->pipe, retval); @@ -509,11 +490,9 @@ static void mct_u232_dtr_rts(struct usb_serial_port *port, int on) static void mct_u232_close(struct usb_serial_port *port) { - /* - * Must kill the read urb as it is actually an interrupt urb, which - * generic close thus fails to kill. - */ - usb_kill_urb(port->read_urb); + struct mct_u232_private *priv = usb_get_serial_port_data(port); + + usb_kill_urb(priv->read_urb); usb_kill_urb(port->interrupt_in_urb); usb_serial_generic_close(port); @@ -570,7 +549,7 @@ static void mct_u232_read_int_callback(struct urb *urb) /* Record Control Line states */ mct_u232_msr_to_state(port, &priv->control_state, priv->last_msr); - mct_u232_msr_to_icount(&priv->icount, priv->last_msr); + mct_u232_msr_to_icount(&port->icount, priv->last_msr); #if 0 /* Not yet handled. See belkin_sa.c for further information */ @@ -598,7 +577,7 @@ static void mct_u232_read_int_callback(struct urb *urb) tty_kref_put(tty); } #endif - wake_up_interruptible(&port->delta_msr_wait); + wake_up_interruptible(&port->port.delta_msr_wait); spin_unlock_irqrestore(&priv->lock, flags); exit: retval = usb_submit_urb(urb, GFP_ATOMIC); @@ -786,86 +765,6 @@ static void mct_u232_unthrottle(struct tty_struct *tty) } } -static int mct_u232_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - DEFINE_WAIT(wait); - struct usb_serial_port *port = tty->driver_data; - struct mct_u232_private *mct_u232_port = usb_get_serial_port_data(port); - struct async_icount cnow, cprev; - unsigned long flags; - - dev_dbg(&port->dev, "%s - cmd = 0x%x\n", __func__, cmd); - - switch (cmd) { - - case TIOCMIWAIT: - - dev_dbg(&port->dev, "%s TIOCMIWAIT", __func__); - - spin_lock_irqsave(&mct_u232_port->lock, flags); - cprev = mct_u232_port->icount; - spin_unlock_irqrestore(&mct_u232_port->lock, flags); - for ( ; ; ) { - prepare_to_wait(&port->delta_msr_wait, - &wait, TASK_INTERRUPTIBLE); - schedule(); - finish_wait(&port->delta_msr_wait, &wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - - if (port->serial->disconnected) - return -EIO; - - spin_lock_irqsave(&mct_u232_port->lock, flags); - cnow = mct_u232_port->icount; - spin_unlock_irqrestore(&mct_u232_port->lock, flags); - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { - return 0; - } - cprev = cnow; - } - - } - return -ENOIOCTLCMD; -} - -static int mct_u232_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - struct usb_serial_port *port = tty->driver_data; - struct mct_u232_private *mct_u232_port = usb_get_serial_port_data(port); - struct async_icount *ic = &mct_u232_port->icount; - unsigned long flags; - - spin_lock_irqsave(&mct_u232_port->lock, flags); - - icount->cts = ic->cts; - icount->dsr = ic->dsr; - icount->rng = ic->rng; - icount->dcd = ic->dcd; - icount->rx = ic->rx; - icount->tx = ic->tx; - icount->frame = ic->frame; - icount->overrun = ic->overrun; - icount->parity = ic->parity; - icount->brk = ic->brk; - icount->buf_overrun = ic->buf_overrun; - - spin_unlock_irqrestore(&mct_u232_port->lock, flags); - - dev_dbg(&port->dev, "%s TIOCGICOUNT RX=%d, TX=%d\n", - __func__, icount->rx, icount->tx); - return 0; -} - module_usb_serial_driver(serial_drivers, id_table); MODULE_AUTHOR(DRIVER_AUTHOR); diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index bf3c7a23553e..47e247759eb0 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -177,10 +177,7 @@ static void metrousb_cleanup(struct usb_serial_port *port) usb_unlink_urb(port->interrupt_in_urb); usb_kill_urb(port->interrupt_in_urb); - mutex_lock(&port->serial->disc_mutex); - if (!port->serial->disconnected) - metrousb_send_unidirectional_cmd(UNI_CMD_CLOSE, port); - mutex_unlock(&port->serial->disc_mutex); + metrousb_send_unidirectional_cmd(UNI_CMD_CLOSE, port); } static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port) diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index e956eae198fd..cc0e54345df9 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -62,7 +62,6 @@ struct moschip_port { __u8 shadowMCR; /* last MCR value received */ __u8 shadowMSR; /* last MSR value received */ char open; - struct async_icount icount; struct usb_serial_port *port; /* loop back to the owner */ struct urb *write_urb_pool[NUM_URBS]; }; @@ -1071,9 +1070,6 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port) dev_err(&port->dev, "%s - Error %d submitting read urb\n", __func__, response); - /* initialize our icount structure */ - memset(&(mos7720_port->icount), 0x00, sizeof(mos7720_port->icount)); - /* initialize our port settings */ mos7720_port->shadowMCR = UART_MCR_OUT2; /* Must set to enable ints! */ @@ -1140,16 +1136,9 @@ static void mos7720_close(struct usb_serial_port *port) usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); - mutex_lock(&serial->disc_mutex); - /* these commands must not be issued if the device has - * been disconnected */ - if (!serial->disconnected) { - write_mos_reg(serial, port->number - port->serial->minor, - MCR, 0x00); - write_mos_reg(serial, port->number - port->serial->minor, - IER, 0x00); - } - mutex_unlock(&serial->disc_mutex); + write_mos_reg(serial, port->number - port->serial->minor, MCR, 0x00); + write_mos_reg(serial, port->number - port->serial->minor, IER, 0x00); + mos7720_port->open = 0; } @@ -1799,33 +1788,6 @@ static int mos7720_tiocmset(struct tty_struct *tty, return 0; } -static int mos7720_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - struct usb_serial_port *port = tty->driver_data; - struct moschip_port *mos7720_port; - struct async_icount cnow; - - mos7720_port = usb_get_serial_port_data(port); - cnow = mos7720_port->icount; - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - - dev_dbg(&port->dev, "%s TIOCGICOUNT RX=%d, TX=%d\n", __func__, - icount->rx, icount->tx); - return 0; -} - static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd, unsigned int __user *value) { @@ -1901,8 +1863,6 @@ static int mos7720_ioctl(struct tty_struct *tty, { struct usb_serial_port *port = tty->driver_data; struct moschip_port *mos7720_port; - struct async_icount cnow; - struct async_icount cprev; mos7720_port = usb_get_serial_port_data(port); if (mos7720_port == NULL) @@ -1927,27 +1887,6 @@ static int mos7720_ioctl(struct tty_struct *tty, dev_dbg(&port->dev, "%s TIOCGSERIAL\n", __func__); return get_serial_info(mos7720_port, (struct serial_struct __user *)arg); - - case TIOCMIWAIT: - dev_dbg(&port->dev, "%s TIOCMIWAIT\n", __func__); - cprev = mos7720_port->icount; - while (1) { - if (signal_pending(current)) - return -ERESTARTSYS; - cnow = mos7720_port->icount; - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { - return 0; - } - cprev = cnow; - } - /* NOTREACHED */ - break; } return -ENOIOCTLCMD; @@ -2103,7 +2042,6 @@ static struct usb_serial_driver moschip7720_2port_driver = { .ioctl = mos7720_ioctl, .tiocmget = mos7720_tiocmget, .tiocmset = mos7720_tiocmset, - .get_icount = mos7720_get_icount, .set_termios = mos7720_set_termios, .write = mos7720_write, .write_room = mos7720_write_room, diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 2be376a2e0e3..a0d5ea545982 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -219,8 +219,6 @@ struct moschip_port { char open; char open_ports; wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */ - int delta_msr_cond; - struct async_icount icount; struct usb_serial_port *port; /* loop back to the owner of this object */ /* Offsets */ @@ -399,32 +397,22 @@ static void mos7840_handle_new_msr(struct moschip_port *port, __u8 new_msr) struct moschip_port *mos7840_port; struct async_icount *icount; mos7840_port = port; - icount = &mos7840_port->icount; if (new_msr & (MOS_MSR_DELTA_CTS | MOS_MSR_DELTA_DSR | MOS_MSR_DELTA_RI | MOS_MSR_DELTA_CD)) { - icount = &mos7840_port->icount; + icount = &mos7840_port->port->icount; /* update input line counters */ - if (new_msr & MOS_MSR_DELTA_CTS) { + if (new_msr & MOS_MSR_DELTA_CTS) icount->cts++; - smp_wmb(); - } - if (new_msr & MOS_MSR_DELTA_DSR) { + if (new_msr & MOS_MSR_DELTA_DSR) icount->dsr++; - smp_wmb(); - } - if (new_msr & MOS_MSR_DELTA_CD) { + if (new_msr & MOS_MSR_DELTA_CD) icount->dcd++; - smp_wmb(); - } - if (new_msr & MOS_MSR_DELTA_RI) { + if (new_msr & MOS_MSR_DELTA_RI) icount->rng++; - smp_wmb(); - } - mos7840_port->delta_msr_cond = 1; - wake_up_interruptible(&port->port->delta_msr_wait); + wake_up_interruptible(&port->port->port.delta_msr_wait); } } @@ -442,23 +430,15 @@ static void mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr) } /* update input line counters */ - icount = &port->icount; - if (new_lsr & SERIAL_LSR_BI) { + icount = &port->port->icount; + if (new_lsr & SERIAL_LSR_BI) icount->brk++; - smp_wmb(); - } - if (new_lsr & SERIAL_LSR_OE) { + if (new_lsr & SERIAL_LSR_OE) icount->overrun++; - smp_wmb(); - } - if (new_lsr & SERIAL_LSR_PE) { + if (new_lsr & SERIAL_LSR_PE) icount->parity++; - smp_wmb(); - } - if (new_lsr & SERIAL_LSR_FE) { + if (new_lsr & SERIAL_LSR_FE) icount->frame++; - smp_wmb(); - } } /************************************************************************/ @@ -777,9 +757,8 @@ static void mos7840_bulk_in_callback(struct urb *urb) struct tty_port *tport = &mos7840_port->port->port; tty_insert_flip_string(tport, data, urb->actual_length); tty_flip_buffer_push(tport); - mos7840_port->icount.rx += urb->actual_length; - smp_wmb(); - dev_dbg(&port->dev, "mos7840_port->icount.rx is %d:\n", mos7840_port->icount.rx); + port->icount.rx += urb->actual_length; + dev_dbg(&port->dev, "icount.rx is %d:\n", port->icount.rx); } if (!mos7840_port->read_urb) { @@ -1127,17 +1106,12 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) /* initialize our wait queues */ init_waitqueue_head(&mos7840_port->wait_chase); - /* initialize our icount structure */ - memset(&(mos7840_port->icount), 0x00, sizeof(mos7840_port->icount)); - /* initialize our port settings */ /* Must set to enable ints! */ mos7840_port->shadowMCR = MCR_MASTER_IE; /* send a open port command */ mos7840_port->open = 1; /* mos7840_change_port_settings(mos7840_port,old_termios); */ - mos7840_port->icount.tx = 0; - mos7840_port->icount.rx = 0; return 0; } @@ -1220,25 +1194,10 @@ static void mos7840_close(struct usb_serial_port *port) } } - /* While closing port, shutdown all bulk read, write * - * and interrupt read if they exists */ - if (serial->dev) { - if (mos7840_port->write_urb) { - dev_dbg(&port->dev, "%s", "Shutdown bulk write\n"); - usb_kill_urb(mos7840_port->write_urb); - } - if (mos7840_port->read_urb) { - dev_dbg(&port->dev, "%s", "Shutdown bulk read\n"); - usb_kill_urb(mos7840_port->read_urb); - mos7840_port->read_urb_busy = false; - } - if ((&mos7840_port->control_urb)) { - dev_dbg(&port->dev, "%s", "Shutdown control read\n"); - /*/ usb_kill_urb (mos7840_port->control_urb); */ - } - } -/* if(mos7840_port->ctrl_buf != NULL) */ -/* kfree(mos7840_port->ctrl_buf); */ + usb_kill_urb(mos7840_port->write_urb); + usb_kill_urb(mos7840_port->read_urb); + mos7840_port->read_urb_busy = false; + port0->open_ports--; dev_dbg(&port->dev, "%s in close%d:in port%d\n", __func__, port0->open_ports, port->number); if (port0->open_ports == 0) { @@ -1250,8 +1209,7 @@ static void mos7840_close(struct usb_serial_port *port) if (mos7840_port->write_urb) { /* if this urb had a transfer buffer already (old tx) free it */ - if (mos7840_port->write_urb->transfer_buffer != NULL) - kfree(mos7840_port->write_urb->transfer_buffer); + kfree(mos7840_port->write_urb->transfer_buffer); usb_free_urb(mos7840_port->write_urb); } @@ -1328,9 +1286,8 @@ static void mos7840_break(struct tty_struct *tty, int break_state) if (mos7840_port == NULL) return; - if (serial->dev) - /* flush and block until tx is empty */ - mos7840_block_until_chase_response(tty, mos7840_port); + /* flush and block until tx is empty */ + mos7840_block_until_chase_response(tty, mos7840_port); if (break_state == -1) data = mos7840_port->shadowLCR | LCR_SET_BREAK; @@ -1520,9 +1477,8 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, goto exit; } bytes_sent = transfer_size; - mos7840_port->icount.tx += transfer_size; - smp_wmb(); - dev_dbg(&port->dev, "mos7840_port->icount.tx is %d:\n", mos7840_port->icount.tx); + port->icount.tx += transfer_size; + dev_dbg(&port->dev, "icount.tx is %d:\n", port->icount.tx); exit: return bytes_sent; @@ -2141,34 +2097,6 @@ static int mos7840_get_serial_info(struct moschip_port *mos7840_port, return 0; } -static int mos7840_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - struct usb_serial_port *port = tty->driver_data; - struct moschip_port *mos7840_port; - struct async_icount cnow; - - mos7840_port = mos7840_get_port_private(port); - cnow = mos7840_port->icount; - - smp_rmb(); - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - - dev_dbg(&port->dev, "%s TIOCGICOUNT RX=%d, TX=%d\n", __func__, - icount->rx, icount->tx); - return 0; -} - /***************************************************************************** * SerialIoctl * this function handles any ioctl calls to the driver @@ -2181,9 +2109,6 @@ static int mos7840_ioctl(struct tty_struct *tty, void __user *argp = (void __user *)arg; struct moschip_port *mos7840_port; - struct async_icount cnow; - struct async_icount cprev; - if (mos7840_port_paranoia_check(port, __func__)) return -1; @@ -2208,41 +2133,6 @@ static int mos7840_ioctl(struct tty_struct *tty, case TIOCSSERIAL: dev_dbg(&port->dev, "%s TIOCSSERIAL\n", __func__); break; - - case TIOCMIWAIT: - dev_dbg(&port->dev, "%s TIOCMIWAIT\n", __func__); - cprev = mos7840_port->icount; - while (1) { - /* interruptible_sleep_on(&mos7840_port->delta_msr_wait); */ - mos7840_port->delta_msr_cond = 0; - wait_event_interruptible(port->delta_msr_wait, - (port->serial->disconnected || - mos7840_port-> - delta_msr_cond == 1)); - - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - - if (port->serial->disconnected) - return -EIO; - - cnow = mos7840_port->icount; - smp_rmb(); - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { - return 0; - } - cprev = cnow; - } - /* NOTREACHED */ - break; - default: break; } @@ -2589,7 +2479,8 @@ static struct usb_serial_driver moschip7840_4port_device = { .break_ctl = mos7840_break, .tiocmget = mos7840_tiocmget, .tiocmset = mos7840_tiocmset, - .get_icount = mos7840_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .port_probe = mos7840_port_probe, .port_remove = mos7840_port_remove, .read_bulk_callback = mos7840_bulk_in_callback, diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 1e1cafe287e4..5739bf6f7200 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -33,8 +33,7 @@ /* function prototypes */ static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port); -static void omninet_close(struct usb_serial_port *port); -static void omninet_read_bulk_callback(struct urb *urb); +static void omninet_process_read_urb(struct urb *urb); static void omninet_write_bulk_callback(struct urb *urb); static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); @@ -61,11 +60,10 @@ static struct usb_serial_driver zyxel_omninet_device = { .port_probe = omninet_port_probe, .port_remove = omninet_port_remove, .open = omninet_open, - .close = omninet_close, .write = omninet_write, .write_room = omninet_write_room, - .read_bulk_callback = omninet_read_bulk_callback, .write_bulk_callback = omninet_write_bulk_callback, + .process_read_urb = omninet_process_read_urb, .disconnect = omninet_disconnect, }; @@ -74,29 +72,28 @@ static struct usb_serial_driver * const serial_drivers[] = { }; -/* The protocol. +/* + * The protocol. * * The omni.net always exchange 64 bytes of data with the host. The first - * four bytes are the control header, you can see it in the above structure. + * four bytes are the control header. * * oh_seq is a sequence number. Don't know if/how it's used. * oh_len is the length of the data bytes in the packet. * oh_xxx Bit-mapped, related to handshaking and status info. - * I normally set it to 0x03 in trasmitted frames. + * I normally set it to 0x03 in transmitted frames. * 7: Active when the TA is in a CONNECTed state. * 6: unknown * 5: handshaking, unknown * 4: handshaking, unknown * 3: unknown, usually 0 * 2: unknown, usually 0 - * 1: handshaking, unknown, usually set to 1 in trasmitted frames - * 0: handshaking, unknown, usually set to 1 in trasmitted frames + * 1: handshaking, unknown, usually set to 1 in transmitted frames + * 0: handshaking, unknown, usually set to 1 in transmitted frames * oh_pad Probably a pad byte. * * After the header you will find data bytes if oh_len was greater than zero. - * */ - struct omninet_header { __u8 oh_seq; __u8 oh_len; @@ -112,7 +109,7 @@ static int omninet_port_probe(struct usb_serial_port *port) { struct omninet_data *od; - od = kmalloc(sizeof(struct omninet_data), GFP_KERNEL); + od = kzalloc(sizeof(*od), GFP_KERNEL); if (!od) return -ENOMEM; @@ -135,56 +132,32 @@ static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port) { struct usb_serial *serial = port->serial; struct usb_serial_port *wport; - int result = 0; wport = serial->port[1]; tty_port_tty_set(&wport->port, tty); - /* Start reading from the device */ - result = usb_submit_urb(port->read_urb, GFP_KERNEL); - if (result) - dev_err(&port->dev, - "%s - failed submitting read urb, error %d\n", - __func__, result); - return result; -} - -static void omninet_close(struct usb_serial_port *port) -{ - usb_kill_urb(port->read_urb); + return usb_serial_generic_open(tty, port); } +#define OMNINET_HEADERLEN 4 +#define OMNINET_BULKOUTSIZE 64 +#define OMNINET_PAYLOADSIZE (OMNINET_BULKOUTSIZE - OMNINET_HEADERLEN) -#define OMNINET_DATAOFFSET 0x04 -#define OMNINET_HEADERLEN sizeof(struct omninet_header) -#define OMNINET_BULKOUTSIZE (64 - OMNINET_HEADERLEN) - -static void omninet_read_bulk_callback(struct urb *urb) +static void omninet_process_read_urb(struct urb *urb) { - struct usb_serial_port *port = urb->context; - unsigned char *data = urb->transfer_buffer; - struct omninet_header *header = (struct omninet_header *) &data[0]; - int status = urb->status; - int result; + struct usb_serial_port *port = urb->context; + const struct omninet_header *hdr = urb->transfer_buffer; + const unsigned char *data; + size_t data_len; - if (status) { - dev_dbg(&port->dev, "%s - nonzero read bulk status received: %d\n", - __func__, status); + if (urb->actual_length <= OMNINET_HEADERLEN || !hdr->oh_len) return; - } - - if (urb->actual_length && header->oh_len) { - tty_insert_flip_string(&port->port, data + OMNINET_DATAOFFSET, - header->oh_len); - tty_flip_buffer_push(&port->port); - } - /* Continue trying to always read */ - result = usb_submit_urb(urb, GFP_ATOMIC); - if (result) - dev_err(&port->dev, - "%s - failed resubmitting read urb, error %d\n", - __func__, result); + data = (char *)urb->transfer_buffer + OMNINET_HEADERLEN; + data_len = min_t(size_t, urb->actual_length - OMNINET_HEADERLEN, + hdr->oh_len); + tty_insert_flip_string(&port->port, data, data_len); + tty_flip_buffer_push(&port->port); } static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, @@ -209,9 +182,9 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, return 0; } - count = (count > OMNINET_BULKOUTSIZE) ? OMNINET_BULKOUTSIZE : count; + count = (count > OMNINET_PAYLOADSIZE) ? OMNINET_PAYLOADSIZE : count; - memcpy(wport->write_urb->transfer_buffer + OMNINET_DATAOFFSET, + memcpy(wport->write_urb->transfer_buffer + OMNINET_HEADERLEN, buf, count); usb_serial_debug_data(&port->dev, __func__, count, @@ -223,7 +196,7 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, header->oh_pad = 0x00; /* send the data out the bulk port, always 64 bytes */ - wport->write_urb->transfer_buffer_length = 64; + wport->write_urb->transfer_buffer_length = OMNINET_BULKOUTSIZE; result = usb_submit_urb(wport->write_urb, GFP_ATOMIC); if (result) { diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index e13e1a4d3e1e..5f4b0cd0f6e9 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -120,7 +120,10 @@ static int send_control_msg(struct usb_serial_port *port, u8 requesttype, 0, 0, buffer, 1, 0); kfree(buffer); - return retval; + if (retval < 0) + return retval; + + return 0; } static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port) @@ -306,7 +309,6 @@ static int opticon_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; - struct usb_serial *serial = port->serial; struct opticon_private *priv = usb_get_serial_port_data(port); unsigned long flags; bool rts; @@ -327,15 +329,11 @@ static int opticon_tiocmset(struct tty_struct *tty, if (!changed) return 0; - /* Send the new RTS state to the connected device */ - mutex_lock(&serial->disc_mutex); - if (!serial->disconnected) - ret = send_control_msg(port, CONTROL_RTS, !rts); - else - ret = -ENODEV; - mutex_unlock(&serial->disc_mutex); + ret = send_control_msg(port, CONTROL_RTS, !rts); + if (ret) + return usb_translate_errors(ret); - return ret; + return 0; } static int get_serial_info(struct usb_serial_port *port, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 09cd3967b8df..734372846abb 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -347,6 +347,7 @@ static void option_instat_callback(struct urb *urb); /* Olivetti products */ #define OLIVETTI_VENDOR_ID 0x0b3c #define OLIVETTI_PRODUCT_OLICARD100 0xc000 +#define OLIVETTI_PRODUCT_OLICARD145 0xc003 /* Celot products */ #define CELOT_VENDOR_ID 0x211f @@ -1273,6 +1274,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) }, + { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD145) }, { USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */ { USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */ { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/ @@ -1350,6 +1352,12 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE(CHANGHONG_VENDOR_ID, CHANGHONG_PRODUCT_CH690) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x02, 0x01) }, /* D-Link DWM-156 (variant) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x00, 0x00) }, /* D-Link DWM-156 (variant) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d02, 0xff, 0x02, 0x01) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d02, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x02, 0x01) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 87c71ccfee87..7e3e0782e51f 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -124,8 +124,6 @@ static void oti6858_close(struct usb_serial_port *port); static void oti6858_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); static void oti6858_init_termios(struct tty_struct *tty); -static int oti6858_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg); static void oti6858_read_int_callback(struct urb *urb); static void oti6858_read_bulk_callback(struct urb *urb); static void oti6858_write_bulk_callback(struct urb *urb); @@ -136,6 +134,7 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty); static int oti6858_tiocmget(struct tty_struct *tty); static int oti6858_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); +static int oti6858_tiocmiwait(struct tty_struct *tty, unsigned long arg); static int oti6858_port_probe(struct usb_serial_port *port); static int oti6858_port_remove(struct usb_serial_port *port); @@ -150,11 +149,11 @@ static struct usb_serial_driver oti6858_device = { .open = oti6858_open, .close = oti6858_close, .write = oti6858_write, - .ioctl = oti6858_ioctl, .set_termios = oti6858_set_termios, .init_termios = oti6858_init_termios, .tiocmget = oti6858_tiocmget, .tiocmset = oti6858_tiocmset, + .tiocmiwait = oti6858_tiocmiwait, .read_bulk_callback = oti6858_read_bulk_callback, .read_int_callback = oti6858_read_int_callback, .write_bulk_callback = oti6858_write_bulk_callback, @@ -650,8 +649,9 @@ static int oti6858_tiocmget(struct tty_struct *tty) return result; } -static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) +static int oti6858_tiocmiwait(struct tty_struct *tty, unsigned long arg) { + struct usb_serial_port *port = tty->driver_data; struct oti6858_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned int prev, status; @@ -662,7 +662,7 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) spin_unlock_irqrestore(&priv->lock, flags); while (1) { - wait_event_interruptible(port->delta_msr_wait, + wait_event_interruptible(port->port.delta_msr_wait, port->serial->disconnected || priv->status.pin_state != prev); if (signal_pending(current)) @@ -689,24 +689,6 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) return 0; } -static int oti6858_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct usb_serial_port *port = tty->driver_data; - - dev_dbg(&port->dev, "%s(cmd = 0x%04x, arg = 0x%08lx)\n", __func__, cmd, arg); - - switch (cmd) { - case TIOCMIWAIT: - dev_dbg(&port->dev, "%s(): TIOCMIWAIT\n", __func__); - return wait_modem_info(port, arg); - default: - dev_dbg(&port->dev, "%s(): 0x%04x not supported\n", __func__, cmd); - break; - } - return -ENOIOCTLCMD; -} - static void oti6858_read_int_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; @@ -765,7 +747,7 @@ static void oti6858_read_int_callback(struct urb *urb) if (!priv->transient) { if (xs->pin_state != priv->status.pin_state) - wake_up_interruptible(&port->delta_msr_wait); + wake_up_interruptible(&port->port.delta_msr_wait); memcpy(&priv->status, xs, OTI6858_CTRL_PKT_SIZE); } diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 3b10018d89a3..7151659367a0 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -149,7 +149,7 @@ static int pl2303_vendor_read(__u16 value, __u16 index, int res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), VENDOR_READ_REQUEST, VENDOR_READ_REQUEST_TYPE, value, index, buf, 1, 100); - dev_dbg(&serial->dev->dev, "0x%x:0x%x:0x%x:0x%x %d - %x\n", + dev_dbg(&serial->interface->dev, "0x%x:0x%x:0x%x:0x%x %d - %x\n", VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, value, index, res, buf[0]); return res; @@ -161,7 +161,7 @@ static int pl2303_vendor_write(__u16 value, __u16 index, int res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), VENDOR_WRITE_REQUEST, VENDOR_WRITE_REQUEST_TYPE, value, index, NULL, 0, 100); - dev_dbg(&serial->dev->dev, "0x%x:0x%x:0x%x:0x%x %d\n", + dev_dbg(&serial->interface->dev, "0x%x:0x%x:0x%x:0x%x %d\n", VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, value, index, res); return res; @@ -248,14 +248,15 @@ static int pl2303_port_remove(struct usb_serial_port *port) return 0; } -static int set_control_lines(struct usb_device *dev, u8 value) +static int pl2303_set_control_lines(struct usb_serial_port *port, u8 value) { + struct usb_device *dev = port->serial->dev; int retval; retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE, value, 0, NULL, 0, 100); - dev_dbg(&dev->dev, "%s - value = %d, retval = %d\n", __func__, + dev_dbg(&port->dev, "%s - value = %d, retval = %d\n", __func__, value, retval); return retval; } @@ -437,7 +438,7 @@ static void pl2303_set_termios(struct tty_struct *tty, if (control != priv->line_control) { control = priv->line_control; spin_unlock_irqrestore(&priv->lock, flags); - set_control_lines(serial->dev, control); + pl2303_set_control_lines(port, control); } else { spin_unlock_irqrestore(&priv->lock, flags); } @@ -480,7 +481,7 @@ static void pl2303_dtr_rts(struct usb_serial_port *port, int on) priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); control = priv->line_control; spin_unlock_irqrestore(&priv->lock, flags); - set_control_lines(port->serial->dev, control); + pl2303_set_control_lines(port, control); } static void pl2303_close(struct usb_serial_port *port) @@ -530,7 +531,6 @@ static int pl2303_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; - struct usb_serial *serial = port->serial; struct pl2303_private *priv = usb_get_serial_port_data(port); unsigned long flags; u8 control; @@ -548,14 +548,11 @@ static int pl2303_tiocmset(struct tty_struct *tty, control = priv->line_control; spin_unlock_irqrestore(&priv->lock, flags); - mutex_lock(&serial->disc_mutex); - if (!serial->disconnected) - ret = set_control_lines(serial->dev, control); - else - ret = -ENODEV; - mutex_unlock(&serial->disc_mutex); + ret = pl2303_set_control_lines(port, control); + if (ret) + return usb_translate_errors(ret); - return ret; + return 0; } static int pl2303_tiocmget(struct tty_struct *tty) @@ -592,8 +589,9 @@ static int pl2303_carrier_raised(struct usb_serial_port *port) return 0; } -static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) +static int pl2303_tiocmiwait(struct tty_struct *tty, unsigned long arg) { + struct usb_serial_port *port = tty->driver_data; struct pl2303_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned int prevstatus; @@ -605,7 +603,7 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) spin_unlock_irqrestore(&priv->lock, flags); while (1) { - interruptible_sleep_on(&port->delta_msr_wait); + interruptible_sleep_on(&port->port.delta_msr_wait); /* see if a signal did it */ if (signal_pending(current)) return -ERESTARTSYS; @@ -651,10 +649,6 @@ static int pl2303_ioctl(struct tty_struct *tty, return -EFAULT; return 0; - - case TIOCMIWAIT: - dev_dbg(&port->dev, "%s TIOCMIWAIT\n", __func__); - return wait_modem_info(port, arg); default: dev_dbg(&port->dev, "%s not supported = 0x%04x\n", __func__, cmd); break; @@ -720,7 +714,7 @@ static void pl2303_update_line_status(struct usb_serial_port *port, spin_unlock_irqrestore(&priv->lock, flags); if (priv->line_status & UART_BREAK_ERROR) usb_serial_handle_break(port); - wake_up_interruptible(&port->delta_msr_wait); + wake_up_interruptible(&port->port.delta_msr_wait); tty = tty_port_tty_get(&port->port); if (!tty) @@ -784,7 +778,7 @@ static void pl2303_process_read_urb(struct urb *urb) line_status = priv->line_status; priv->line_status &= ~UART_STATE_TRANSIENT_MASK; spin_unlock_irqrestore(&priv->lock, flags); - wake_up_interruptible(&port->delta_msr_wait); + wake_up_interruptible(&port->port.delta_msr_wait); if (!urb->actual_length) return; @@ -835,6 +829,7 @@ static struct usb_serial_driver pl2303_device = { .set_termios = pl2303_set_termios, .tiocmget = pl2303_tiocmget, .tiocmset = pl2303_tiocmset, + .tiocmiwait = pl2303_tiocmiwait, .process_read_urb = pl2303_process_read_urb, .read_int_callback = pl2303_read_int_callback, .attach = pl2303_startup, diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index ef3a7d5eaab4..02b0803425c5 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -127,8 +127,6 @@ struct qt2_port_private { u8 shadowLSR; u8 shadowMSR; - struct async_icount icount; - struct usb_serial_port *port; }; @@ -420,12 +418,6 @@ static void qt2_close(struct usb_serial_port *port) port_priv->urb_in_use = false; spin_unlock_irqrestore(&port_priv->urb_lock, flags); - mutex_lock(&port->serial->disc_mutex); - if (port->serial->disconnected) { - mutex_unlock(&port->serial->disc_mutex); - return; - } - /* flush the port transmit buffer */ i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), @@ -456,8 +448,6 @@ static void qt2_close(struct usb_serial_port *port) if (i < 0) dev_err(&port->dev, "%s - close port failed %i\n", __func__, i); - - mutex_unlock(&port->serial->disc_mutex); } static void qt2_disconnect(struct usb_serial *serial) @@ -490,71 +480,6 @@ static int get_serial_info(struct usb_serial_port *port, return 0; } -static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) -{ - struct qt2_port_private *priv = usb_get_serial_port_data(port); - struct async_icount prev, cur; - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - prev = priv->icount; - spin_unlock_irqrestore(&priv->lock, flags); - - while (1) { - wait_event_interruptible(port->delta_msr_wait, - (port->serial->disconnected || - (priv->icount.rng != prev.rng) || - (priv->icount.dsr != prev.dsr) || - (priv->icount.dcd != prev.dcd) || - (priv->icount.cts != prev.cts))); - - if (signal_pending(current)) - return -ERESTARTSYS; - - if (port->serial->disconnected) - return -EIO; - - spin_lock_irqsave(&priv->lock, flags); - cur = priv->icount; - spin_unlock_irqrestore(&priv->lock, flags); - - if ((prev.rng == cur.rng) && - (prev.dsr == cur.dsr) && - (prev.dcd == cur.dcd) && - (prev.cts == cur.cts)) - return -EIO; - - if ((arg & TIOCM_RNG && (prev.rng != cur.rng)) || - (arg & TIOCM_DSR && (prev.dsr != cur.dsr)) || - (arg & TIOCM_CD && (prev.dcd != cur.dcd)) || - (arg & TIOCM_CTS && (prev.cts != cur.cts))) - return 0; - } - return 0; -} - -static int qt2_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - struct usb_serial_port *port = tty->driver_data; - struct qt2_port_private *priv = usb_get_serial_port_data(port); - struct async_icount cnow = priv->icount; - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - - return 0; -} - static int qt2_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { @@ -564,10 +489,6 @@ static int qt2_ioctl(struct tty_struct *tty, case TIOCGSERIAL: return get_serial_info(port, (struct serial_struct __user *)arg); - - case TIOCMIWAIT: - return wait_modem_info(port, arg); - default: break; } @@ -948,18 +869,15 @@ static void qt2_update_msr(struct usb_serial_port *port, unsigned char *ch) if (newMSR & UART_MSR_ANY_DELTA) { /* update input line counters */ if (newMSR & UART_MSR_DCTS) - port_priv->icount.cts++; - + port->icount.cts++; if (newMSR & UART_MSR_DDSR) - port_priv->icount.dsr++; - + port->icount.dsr++; if (newMSR & UART_MSR_DDCD) - port_priv->icount.dcd++; - + port->icount.dcd++; if (newMSR & UART_MSR_TERI) - port_priv->icount.rng++; + port->icount.rng++; - wake_up_interruptible(&port->delta_msr_wait); + wake_up_interruptible(&port->port.delta_msr_wait); } } @@ -979,7 +897,7 @@ static void qt2_update_lsr(struct usb_serial_port *port, unsigned char *ch) port_priv->shadowLSR = newLSR; spin_unlock_irqrestore(&port_priv->lock, flags); - icount = &port_priv->icount; + icount = &port->icount; if (newLSR & UART_LSR_BRK_ERROR_BITS) { @@ -1089,7 +1007,8 @@ static struct usb_serial_driver qt2_device = { .break_ctl = qt2_break_ctl, .tiocmget = qt2_tiocmget, .tiocmset = qt2_tiocmset, - .get_icount = qt2_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .ioctl = qt2_ioctl, .set_termios = qt2_set_termios, }; diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index d66148a17fe3..8894665cd610 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -774,30 +774,25 @@ static void sierra_close(struct usb_serial_port *port) portdata->rts_state = 0; portdata->dtr_state = 0; - if (serial->dev) { - mutex_lock(&serial->disc_mutex); - if (!serial->disconnected) { - serial->interface->needs_remote_wakeup = 0; - /* odd error handling due to pm counters */ - if (!usb_autopm_get_interface(serial->interface)) - sierra_send_setup(port); - else - usb_autopm_get_interface_no_resume(serial->interface); - - } - mutex_unlock(&serial->disc_mutex); - spin_lock_irq(&intfdata->susp_lock); - portdata->opened = 0; - spin_unlock_irq(&intfdata->susp_lock); + mutex_lock(&serial->disc_mutex); + if (!serial->disconnected) { + serial->interface->needs_remote_wakeup = 0; + /* odd error handling due to pm counters */ + if (!usb_autopm_get_interface(serial->interface)) + sierra_send_setup(port); + else + usb_autopm_get_interface_no_resume(serial->interface); + } + mutex_unlock(&serial->disc_mutex); + spin_lock_irq(&intfdata->susp_lock); + portdata->opened = 0; + spin_unlock_irq(&intfdata->susp_lock); - /* Stop reading urbs */ - sierra_stop_rx_urbs(port); - /* .. and release them */ - for (i = 0; i < portdata->num_in_urbs; i++) { - sierra_release_urb(portdata->in_urbs[i]); - portdata->in_urbs[i] = NULL; - } + sierra_stop_rx_urbs(port); + for (i = 0; i < portdata->num_in_urbs; i++) { + sierra_release_urb(portdata->in_urbs[i]); + portdata->in_urbs[i] = NULL; } } diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 549ef68ff5fa..cf3df793c2b7 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -1,7 +1,7 @@ /* * spcp8x5 USB to serial adaptor driver * - * Copyright (C) 2010 Johan Hovold (jhovold@gmail.com) + * Copyright (C) 2010-2013 Johan Hovold (jhovold@gmail.com) * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn) * Copyright (C) 2006 S1 Corp. * @@ -13,8 +13,6 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * - * */ #include <linux/kernel.h> #include <linux/errno.h> @@ -28,7 +26,10 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -#define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver" +#define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver" + +#define SPCP825_QUIRK_NO_UART_STATUS 0x01 +#define SPCP825_QUIRK_NO_WORK_MODE 0x02 #define SPCP8x5_007_VID 0x04FC #define SPCP8x5_007_PID 0x0201 @@ -46,13 +47,15 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)}, { USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)}, { USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)}, - { USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID)}, + { USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID), + .driver_info = SPCP825_QUIRK_NO_UART_STATUS | + SPCP825_QUIRK_NO_WORK_MODE }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, id_table); struct spcp8x5_usb_ctrl_arg { - u8 type; + u8 type; u8 cmd; u8 cmd_type; u16 value; @@ -138,49 +141,33 @@ struct spcp8x5_usb_ctrl_arg { #define UART_OVERRUN_ERROR 0x40 #define UART_CTS 0x80 -enum spcp8x5_type { - SPCP825_007_TYPE, - SPCP825_008_TYPE, - SPCP825_PHILIP_TYPE, - SPCP825_INTERMATIC_TYPE, - SPCP835_TYPE, -}; - struct spcp8x5_private { - spinlock_t lock; - enum spcp8x5_type type; - u8 line_control; - u8 line_status; + unsigned quirks; + spinlock_t lock; + u8 line_control; }; +static int spcp8x5_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + usb_set_serial_data(serial, (void *)id); + + return 0; +} + static int spcp8x5_port_probe(struct usb_serial_port *port) { - struct usb_serial *serial = port->serial; + const struct usb_device_id *id = usb_get_serial_data(port->serial); struct spcp8x5_private *priv; - enum spcp8x5_type type = SPCP825_007_TYPE; - u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); - - if (product == 0x0201) - type = SPCP825_007_TYPE; - else if (product == 0x0231) - type = SPCP835_TYPE; - else if (product == 0x0235) - type = SPCP825_008_TYPE; - else if (product == 0x0204) - type = SPCP825_INTERMATIC_TYPE; - else if (product == 0x0471 && - serial->dev->descriptor.idVendor == cpu_to_le16(0x081e)) - type = SPCP825_PHILIP_TYPE; - dev_dbg(&serial->dev->dev, "device type = %d\n", (int)type); priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; spin_lock_init(&priv->lock); - priv->type = type; + priv->quirks = id->driver_info; - usb_set_serial_port_data(port , priv); + usb_set_serial_port_data(port, priv); return 0; } @@ -195,86 +182,79 @@ static int spcp8x5_port_remove(struct usb_serial_port *port) return 0; } -/* set the modem control line of the device. - * NOTE spcp825-007 not supported this */ -static int spcp8x5_set_ctrlLine(struct usb_device *dev, u8 value, - enum spcp8x5_type type) +static int spcp8x5_set_ctrl_line(struct usb_serial_port *port, u8 mcr) { + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + struct usb_device *dev = port->serial->dev; int retval; - u8 mcr = 0 ; - if (type == SPCP825_007_TYPE) + if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS) return -EPERM; - mcr = (unsigned short)value; retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), SET_UART_STATUS_TYPE, SET_UART_STATUS, mcr, 0x04, NULL, 0, 100); - if (retval != 0) - dev_dbg(&dev->dev, "usb_control_msg return %#x\n", retval); + if (retval != 0) { + dev_err(&port->dev, "failed to set control lines: %d\n", + retval); + } return retval; } -/* get the modem status register of the device - * NOTE spcp825-007 not supported this */ -static int spcp8x5_get_msr(struct usb_device *dev, u8 *status, - enum spcp8x5_type type) +static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status) { - u8 *status_buffer; + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + struct usb_device *dev = port->serial->dev; + u8 *buf; int ret; - /* I return Permited not support here but seem inval device - * is more fix */ - if (type == SPCP825_007_TYPE) + if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS) return -EPERM; - if (status == NULL) - return -EINVAL; - status_buffer = kmalloc(1, GFP_KERNEL); - if (!status_buffer) + buf = kzalloc(1, GFP_KERNEL); + if (!buf) return -ENOMEM; - status_buffer[0] = status[0]; ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), GET_UART_STATUS, GET_UART_STATUS_TYPE, - 0, GET_UART_STATUS_MSR, status_buffer, 1, 100); + 0, GET_UART_STATUS_MSR, buf, 1, 100); if (ret < 0) - dev_dbg(&dev->dev, "Get MSR = 0x%p failed (error = %d)", - status_buffer, ret); + dev_err(&port->dev, "failed to get modem status: %d", ret); - dev_dbg(&dev->dev, "0xc0:0x22:0:6 %d - 0x%p ", ret, status_buffer); - status[0] = status_buffer[0]; - kfree(status_buffer); + dev_dbg(&port->dev, "0xc0:0x22:0:6 %d - 0x02%x", ret, *buf); + *status = *buf; + kfree(buf); return ret; } -/* select the work mode. - * NOTE this function not supported by spcp825-007 */ -static void spcp8x5_set_workMode(struct usb_device *dev, u16 value, - u16 index, enum spcp8x5_type type) +static void spcp8x5_set_work_mode(struct usb_serial_port *port, u16 value, + u16 index) { + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + struct usb_device *dev = port->serial->dev; int ret; - /* I return Permited not support here but seem inval device - * is more fix */ - if (type == SPCP825_007_TYPE) + if (priv->quirks & SPCP825_QUIRK_NO_WORK_MODE) return; ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), SET_WORKING_MODE_TYPE, SET_WORKING_MODE, value, index, NULL, 0, 100); - dev_dbg(&dev->dev, "value = %#x , index = %#x\n", value, index); + dev_dbg(&port->dev, "value = %#x , index = %#x\n", value, index); if (ret < 0) - dev_dbg(&dev->dev, - "RTSCTS usb_control_msg(enable flowctrl) = %d\n", ret); + dev_err(&port->dev, "failed to set work mode: %d\n", ret); } static int spcp8x5_carrier_raised(struct usb_serial_port *port) { - struct spcp8x5_private *priv = usb_get_serial_port_data(port); - if (priv->line_status & MSR_STATUS_LINE_DCD) + u8 msr; + int ret; + + ret = spcp8x5_get_msr(port, &msr); + if (ret || msr & MSR_STATUS_LINE_DCD) return 1; + return 0; } @@ -293,20 +273,17 @@ static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on) | MCR_CONTROL_LINE_RTS); control = priv->line_control; spin_unlock_irqrestore(&priv->lock, flags); - spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type); + spcp8x5_set_ctrl_line(port, control); } static void spcp8x5_init_termios(struct tty_struct *tty) { - /* for the 1st time call this function */ tty->termios = tty_std_termios; tty->termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL; tty->termios.c_ispeed = 115200; tty->termios.c_ospeed = 115200; } -/* set the serial param for transfer. we should check if we really need to - * transfer. if we set flow control we should do this too. */ static void spcp8x5_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { @@ -321,7 +298,6 @@ static void spcp8x5_set_termios(struct tty_struct *tty, int i; u8 control; - /* check that they really want us to change something */ if (!tty_termios_hw_change(&tty->termios, old_termios)) return; @@ -337,7 +313,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty, if (control != priv->line_control) { control = priv->line_control; spin_unlock_irqrestore(&priv->lock, flags); - spcp8x5_set_ctrlLine(serial->dev, control , priv->type); + spcp8x5_set_ctrl_line(port, control); } else { spin_unlock_irqrestore(&priv->lock, flags); } @@ -397,9 +373,9 @@ static void spcp8x5_set_termios(struct tty_struct *tty, if (cflag & PARENB) { buf[1] |= (cflag & PARODD) ? SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ; - } else + } else { buf[1] |= SET_UART_FORMAT_PAR_NONE; - + } uartdata = buf[0] | buf[1]<<8; i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), @@ -412,22 +388,16 @@ static void spcp8x5_set_termios(struct tty_struct *tty, if (cflag & CRTSCTS) { /* enable hardware flow control */ - spcp8x5_set_workMode(serial->dev, 0x000a, - SET_WORKING_MODE_U2C, priv->type); + spcp8x5_set_work_mode(port, 0x000a, SET_WORKING_MODE_U2C); } } -/* open the serial port. do some usb system call. set termios and get the line - * status of the device. */ static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port) { struct ktermios tmp_termios; struct usb_serial *serial = port->serial; struct spcp8x5_private *priv = usb_get_serial_port_data(port); int ret; - unsigned long flags; - u8 status = 0x30; - /* status 0x30 means DSR and CTS = 1 other CDC RI and delta = 0 */ usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); @@ -438,142 +408,16 @@ static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port) if (ret) return ret; - spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type); + spcp8x5_set_ctrl_line(port, priv->line_control); - /* Setup termios */ if (tty) spcp8x5_set_termios(tty, port, &tmp_termios); - spcp8x5_get_msr(serial->dev, &status, priv->type); - - /* may be we should update uart status here but now we did not do */ - spin_lock_irqsave(&priv->lock, flags); - priv->line_status = status & 0xf0 ; - spin_unlock_irqrestore(&priv->lock, flags); - port->port.drain_delay = 256; return usb_serial_generic_open(tty, port); } -static void spcp8x5_process_read_urb(struct urb *urb) -{ - struct usb_serial_port *port = urb->context; - struct spcp8x5_private *priv = usb_get_serial_port_data(port); - unsigned char *data = urb->transfer_buffer; - unsigned long flags; - u8 status; - char tty_flag; - - /* get tty_flag from status */ - tty_flag = TTY_NORMAL; - - spin_lock_irqsave(&priv->lock, flags); - status = priv->line_status; - priv->line_status &= ~UART_STATE_TRANSIENT_MASK; - spin_unlock_irqrestore(&priv->lock, flags); - /* wake up the wait for termios */ - wake_up_interruptible(&port->delta_msr_wait); - - if (!urb->actual_length) - return; - - - if (status & UART_STATE_TRANSIENT_MASK) { - /* break takes precedence over parity, which takes precedence - * over framing errors */ - if (status & UART_BREAK_ERROR) - tty_flag = TTY_BREAK; - else if (status & UART_PARITY_ERROR) - tty_flag = TTY_PARITY; - else if (status & UART_FRAME_ERROR) - tty_flag = TTY_FRAME; - dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag); - - /* overrun is special, not associated with a char */ - if (status & UART_OVERRUN_ERROR) - tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); - - if (status & UART_DCD) { - struct tty_struct *tty = tty_port_tty_get(&port->port); - if (tty) { - usb_serial_handle_dcd_change(port, tty, - priv->line_status & MSR_STATUS_LINE_DCD); - tty_kref_put(tty); - } - } - } - - tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag, - urb->actual_length); - tty_flip_buffer_push(&port->port); -} - -static int spcp8x5_wait_modem_info(struct usb_serial_port *port, - unsigned int arg) -{ - struct spcp8x5_private *priv = usb_get_serial_port_data(port); - unsigned long flags; - unsigned int prevstatus; - unsigned int status; - unsigned int changed; - - spin_lock_irqsave(&priv->lock, flags); - prevstatus = priv->line_status; - spin_unlock_irqrestore(&priv->lock, flags); - - while (1) { - /* wake up in bulk read */ - interruptible_sleep_on(&port->delta_msr_wait); - - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - - if (port->serial->disconnected) - return -EIO; - - spin_lock_irqsave(&priv->lock, flags); - status = priv->line_status; - spin_unlock_irqrestore(&priv->lock, flags); - - changed = prevstatus^status; - - if (((arg & TIOCM_RNG) && (changed & MSR_STATUS_LINE_RI)) || - ((arg & TIOCM_DSR) && (changed & MSR_STATUS_LINE_DSR)) || - ((arg & TIOCM_CD) && (changed & MSR_STATUS_LINE_DCD)) || - ((arg & TIOCM_CTS) && (changed & MSR_STATUS_LINE_CTS))) - return 0; - - prevstatus = status; - } - /* NOTREACHED */ - return 0; -} - -static int spcp8x5_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg) -{ - struct usb_serial_port *port = tty->driver_data; - - dev_dbg(&port->dev, "%s (%d) cmd = 0x%04x\n", __func__, - port->number, cmd); - - switch (cmd) { - case TIOCMIWAIT: - dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__, - port->number); - return spcp8x5_wait_modem_info(port, arg); - - default: - dev_dbg(&port->dev, "%s not supported = 0x%04x", __func__, - cmd); - break; - } - - return -ENOIOCTLCMD; -} - static int spcp8x5_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { @@ -594,7 +438,7 @@ static int spcp8x5_tiocmset(struct tty_struct *tty, control = priv->line_control; spin_unlock_irqrestore(&priv->lock, flags); - return spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type); + return spcp8x5_set_ctrl_line(port, control); } static int spcp8x5_tiocmget(struct tty_struct *tty) @@ -603,12 +447,15 @@ static int spcp8x5_tiocmget(struct tty_struct *tty) struct spcp8x5_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned int mcr; - unsigned int status; + u8 status; unsigned int result; + result = spcp8x5_get_msr(port, &status); + if (result) + return result; + spin_lock_irqsave(&priv->lock, flags); mcr = priv->line_control; - status = priv->line_status; spin_unlock_irqrestore(&priv->lock, flags); result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) @@ -621,7 +468,6 @@ static int spcp8x5_tiocmget(struct tty_struct *tty) return result; } -/* All of the device info needed for the spcp8x5 SIO serial converter */ static struct usb_serial_driver spcp8x5_device = { .driver = { .owner = THIS_MODULE, @@ -629,17 +475,16 @@ static struct usb_serial_driver spcp8x5_device = { }, .id_table = id_table, .num_ports = 1, - .open = spcp8x5_open, + .open = spcp8x5_open, .dtr_rts = spcp8x5_dtr_rts, .carrier_raised = spcp8x5_carrier_raised, - .set_termios = spcp8x5_set_termios, + .set_termios = spcp8x5_set_termios, .init_termios = spcp8x5_init_termios, - .ioctl = spcp8x5_ioctl, - .tiocmget = spcp8x5_tiocmget, - .tiocmset = spcp8x5_tiocmset, + .tiocmget = spcp8x5_tiocmget, + .tiocmset = spcp8x5_tiocmset, + .probe = spcp8x5_probe, .port_probe = spcp8x5_port_probe, .port_remove = spcp8x5_port_remove, - .process_read_urb = spcp8x5_process_read_urb, }; static struct usb_serial_driver * const serial_drivers[] = { diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index 4b2a19757b4d..5b62dbbdf996 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -61,7 +61,6 @@ struct ssu100_port_private { spinlock_t status_lock; u8 shadowLSR; u8 shadowMSR; - struct async_icount icount; }; static inline int ssu100_control_msg(struct usb_device *dev, @@ -315,11 +314,6 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port) return usb_serial_generic_open(tty, port); } -static void ssu100_close(struct usb_serial_port *port) -{ - usb_serial_generic_close(port); -} - static int get_serial_info(struct usb_serial_port *port, struct serial_struct __user *retinfo) { @@ -343,73 +337,6 @@ static int get_serial_info(struct usb_serial_port *port, return 0; } -static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) -{ - struct ssu100_port_private *priv = usb_get_serial_port_data(port); - struct async_icount prev, cur; - unsigned long flags; - - spin_lock_irqsave(&priv->status_lock, flags); - prev = priv->icount; - spin_unlock_irqrestore(&priv->status_lock, flags); - - while (1) { - wait_event_interruptible(port->delta_msr_wait, - (port->serial->disconnected || - (priv->icount.rng != prev.rng) || - (priv->icount.dsr != prev.dsr) || - (priv->icount.dcd != prev.dcd) || - (priv->icount.cts != prev.cts))); - - if (signal_pending(current)) - return -ERESTARTSYS; - - if (port->serial->disconnected) - return -EIO; - - spin_lock_irqsave(&priv->status_lock, flags); - cur = priv->icount; - spin_unlock_irqrestore(&priv->status_lock, flags); - - if ((prev.rng == cur.rng) && - (prev.dsr == cur.dsr) && - (prev.dcd == cur.dcd) && - (prev.cts == cur.cts)) - return -EIO; - - if ((arg & TIOCM_RNG && (prev.rng != cur.rng)) || - (arg & TIOCM_DSR && (prev.dsr != cur.dsr)) || - (arg & TIOCM_CD && (prev.dcd != cur.dcd)) || - (arg & TIOCM_CTS && (prev.cts != cur.cts))) - return 0; - } - return 0; -} - -static int ssu100_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - struct usb_serial_port *port = tty->driver_data; - struct ssu100_port_private *priv = usb_get_serial_port_data(port); - struct async_icount cnow = priv->icount; - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - - return 0; -} - - - static int ssu100_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { @@ -421,10 +348,6 @@ static int ssu100_ioctl(struct tty_struct *tty, case TIOCGSERIAL: return get_serial_info(port, (struct serial_struct __user *) arg); - - case TIOCMIWAIT: - return wait_modem_info(port, arg); - default: break; } @@ -532,14 +455,14 @@ static void ssu100_update_msr(struct usb_serial_port *port, u8 msr) if (msr & UART_MSR_ANY_DELTA) { /* update input line counters */ if (msr & UART_MSR_DCTS) - priv->icount.cts++; + port->icount.cts++; if (msr & UART_MSR_DDSR) - priv->icount.dsr++; + port->icount.dsr++; if (msr & UART_MSR_DDCD) - priv->icount.dcd++; + port->icount.dcd++; if (msr & UART_MSR_TERI) - priv->icount.rng++; - wake_up_interruptible(&port->delta_msr_wait); + port->icount.rng++; + wake_up_interruptible(&port->port.delta_msr_wait); } } @@ -558,22 +481,22 @@ static void ssu100_update_lsr(struct usb_serial_port *port, u8 lsr, /* we always want to update icount, but we only want to * update tty_flag for one case */ if (lsr & UART_LSR_BI) { - priv->icount.brk++; + port->icount.brk++; *tty_flag = TTY_BREAK; usb_serial_handle_break(port); } if (lsr & UART_LSR_PE) { - priv->icount.parity++; + port->icount.parity++; if (*tty_flag == TTY_NORMAL) *tty_flag = TTY_PARITY; } if (lsr & UART_LSR_FE) { - priv->icount.frame++; + port->icount.frame++; if (*tty_flag == TTY_NORMAL) *tty_flag = TTY_FRAME; } if (lsr & UART_LSR_OE){ - priv->icount.overrun++; + port->icount.overrun++; if (*tty_flag == TTY_NORMAL) *tty_flag = TTY_OVERRUN; } @@ -630,7 +553,6 @@ static struct usb_serial_driver ssu100_device = { .id_table = id_table, .num_ports = 1, .open = ssu100_open, - .close = ssu100_close, .attach = ssu100_attach, .port_probe = ssu100_port_probe, .port_remove = ssu100_port_remove, @@ -638,10 +560,10 @@ static struct usb_serial_driver ssu100_device = { .process_read_urb = ssu100_process_read_urb, .tiocmget = ssu100_tiocmget, .tiocmset = ssu100_tiocmset, - .get_icount = ssu100_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .ioctl = ssu100_ioctl, .set_termios = ssu100_set_termios, - .disconnect = usb_serial_generic_disconnect, }; static struct usb_serial_driver * const serial_drivers[] = { diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index be05e6caf9a3..9b1648945e7a 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -1,6 +1,7 @@ /* * Symbol USB barcode to serial driver * + * Copyright (C) 2013 Johan Hovold <jhovold@gmail.com> * Copyright (C) 2009 Greg Kroah-Hartman <gregkh@suse.de> * Copyright (C) 2009 Novell Inc. * @@ -26,27 +27,17 @@ static const struct usb_device_id id_table[] = { }; MODULE_DEVICE_TABLE(usb, id_table); -/* This structure holds all of the individual device information */ struct symbol_private { - struct usb_device *udev; - struct usb_serial *serial; - struct usb_serial_port *port; - unsigned char *int_buffer; - struct urb *int_urb; - int buffer_size; - u8 bInterval; - u8 int_address; spinlock_t lock; /* protects the following flags */ bool throttled; bool actually_throttled; - bool rts; }; static void symbol_int_callback(struct urb *urb) { - struct symbol_private *priv = urb->context; + struct usb_serial_port *port = urb->context; + struct symbol_private *priv = usb_get_serial_port_data(port); unsigned char *data = urb->transfer_buffer; - struct usb_serial_port *port = priv->port; int status = urb->status; int result; int data_length; @@ -84,7 +75,7 @@ static void symbol_int_callback(struct urb *urb) tty_insert_flip_string(&port->port, &data[1], data_length); tty_flip_buffer_push(&port->port); } else { - dev_dbg(&priv->udev->dev, + dev_dbg(&port->dev, "Improper amount of data received from the device, " "%d bytes", urb->actual_length); } @@ -94,12 +85,7 @@ exit: /* Continue trying to always read if we should */ if (!priv->throttled) { - usb_fill_int_urb(priv->int_urb, priv->udev, - usb_rcvintpipe(priv->udev, - priv->int_address), - priv->int_buffer, priv->buffer_size, - symbol_int_callback, priv, priv->bInterval); - result = usb_submit_urb(priv->int_urb, GFP_ATOMIC); + result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); if (result) dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", @@ -118,15 +104,10 @@ static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port) spin_lock_irqsave(&priv->lock, flags); priv->throttled = false; priv->actually_throttled = false; - priv->port = port; spin_unlock_irqrestore(&priv->lock, flags); /* Start reading from the device */ - usb_fill_int_urb(priv->int_urb, priv->udev, - usb_rcvintpipe(priv->udev, priv->int_address), - priv->int_buffer, priv->buffer_size, - symbol_int_callback, priv, priv->bInterval); - result = usb_submit_urb(priv->int_urb, GFP_KERNEL); + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", @@ -136,10 +117,7 @@ static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port) static void symbol_close(struct usb_serial_port *port) { - struct symbol_private *priv = usb_get_serial_data(port->serial); - - /* shutdown our urbs */ - usb_kill_urb(priv->int_urb); + usb_kill_urb(port->interrupt_in_urb); } static void symbol_throttle(struct tty_struct *tty) @@ -166,7 +144,7 @@ static void symbol_unthrottle(struct tty_struct *tty) spin_unlock_irq(&priv->lock); if (was_throttled) { - result = usb_submit_urb(priv->int_urb, GFP_KERNEL); + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (result) dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", @@ -176,89 +154,36 @@ static void symbol_unthrottle(struct tty_struct *tty) static int symbol_startup(struct usb_serial *serial) { + if (!serial->num_interrupt_in) { + dev_err(&serial->dev->dev, "no interrupt-in endpoint\n"); + return -ENODEV; + } + + return 0; +} + +static int symbol_port_probe(struct usb_serial_port *port) +{ struct symbol_private *priv; - struct usb_host_interface *intf; - int i; - int retval = -ENOMEM; - bool int_in_found = false; - /* create our private serial structure */ priv = kzalloc(sizeof(*priv), GFP_KERNEL); - if (priv == NULL) { - dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__); + if (!priv) return -ENOMEM; - } + spin_lock_init(&priv->lock); - priv->serial = serial; - priv->port = serial->port[0]; - priv->udev = serial->dev; - - /* find our interrupt endpoint */ - intf = serial->interface->altsetting; - for (i = 0; i < intf->desc.bNumEndpoints; ++i) { - struct usb_endpoint_descriptor *endpoint; - - endpoint = &intf->endpoint[i].desc; - if (!usb_endpoint_is_int_in(endpoint)) - continue; - - priv->int_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!priv->int_urb) { - dev_err(&priv->udev->dev, "out of memory\n"); - goto error; - } - - priv->buffer_size = usb_endpoint_maxp(endpoint) * 2; - priv->int_buffer = kmalloc(priv->buffer_size, GFP_KERNEL); - if (!priv->int_buffer) { - dev_err(&priv->udev->dev, "out of memory\n"); - goto error; - } - - priv->int_address = endpoint->bEndpointAddress; - priv->bInterval = endpoint->bInterval; - - /* set up our int urb */ - usb_fill_int_urb(priv->int_urb, priv->udev, - usb_rcvintpipe(priv->udev, - endpoint->bEndpointAddress), - priv->int_buffer, priv->buffer_size, - symbol_int_callback, priv, priv->bInterval); - - int_in_found = true; - break; - } - if (!int_in_found) { - dev_err(&priv->udev->dev, - "Error - the proper endpoints were not found!\n"); - goto error; - } + usb_set_serial_port_data(port, priv); - usb_set_serial_data(serial, priv); return 0; - -error: - usb_free_urb(priv->int_urb); - kfree(priv->int_buffer); - kfree(priv); - return retval; -} - -static void symbol_disconnect(struct usb_serial *serial) -{ - struct symbol_private *priv = usb_get_serial_data(serial); - - usb_kill_urb(priv->int_urb); - usb_free_urb(priv->int_urb); } -static void symbol_release(struct usb_serial *serial) +static int symbol_port_remove(struct usb_serial_port *port) { - struct symbol_private *priv = usb_get_serial_data(serial); + struct symbol_private *priv = usb_get_serial_port_data(port); - kfree(priv->int_buffer); kfree(priv); + + return 0; } static struct usb_serial_driver symbol_device = { @@ -269,12 +194,13 @@ static struct usb_serial_driver symbol_device = { .id_table = id_table, .num_ports = 1, .attach = symbol_startup, + .port_probe = symbol_port_probe, + .port_remove = symbol_port_remove, .open = symbol_open, .close = symbol_close, - .disconnect = symbol_disconnect, - .release = symbol_release, .throttle = symbol_throttle, .unthrottle = symbol_unthrottle, + .read_int_callback = symbol_int_callback, }; static struct usb_serial_driver * const serial_drivers[] = { diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 19a71a9eecf0..cac47aef2918 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -67,13 +67,10 @@ struct ti_port { int tp_is_open; __u8 tp_msr; - __u8 tp_lsr; __u8 tp_shadow_mcr; __u8 tp_uart_mode; /* 232 or 485 modes */ unsigned int tp_uart_base_addr; int tp_flags; - int tp_closing_wait;/* in .01 secs */ - struct async_icount tp_icount; wait_queue_head_t tp_write_wait; struct ti_device *tp_tdev; struct usb_serial_port *tp_port; @@ -108,8 +105,6 @@ static void ti_throttle(struct tty_struct *tty); static void ti_unthrottle(struct tty_struct *tty); static int ti_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); -static int ti_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount); static void ti_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios); static int ti_tiocmget(struct tty_struct *tty); @@ -124,15 +119,13 @@ static void ti_recv(struct usb_serial_port *port, unsigned char *data, int length); static void ti_send(struct ti_port *tport); static int ti_set_mcr(struct ti_port *tport, unsigned int mcr); -static int ti_get_lsr(struct ti_port *tport); +static int ti_get_lsr(struct ti_port *tport, u8 *lsr); static int ti_get_serial_info(struct ti_port *tport, struct serial_struct __user *ret_arg); static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport, struct serial_struct __user *new_arg); static void ti_handle_new_msr(struct ti_port *tport, __u8 msr); -static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush); - static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty); static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty); @@ -235,7 +228,8 @@ static struct usb_serial_driver ti_1port_device = { .set_termios = ti_set_termios, .tiocmget = ti_tiocmget, .tiocmset = ti_tiocmset, - .get_icount = ti_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .break_ctl = ti_break, .read_int_callback = ti_interrupt_callback, .read_bulk_callback = ti_bulk_in_callback, @@ -265,7 +259,8 @@ static struct usb_serial_driver ti_2port_device = { .set_termios = ti_set_termios, .tiocmget = ti_tiocmget, .tiocmset = ti_tiocmset, - .get_icount = ti_get_icount, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, .break_ctl = ti_break, .read_int_callback = ti_interrupt_callback, .read_bulk_callback = ti_bulk_in_callback, @@ -430,7 +425,7 @@ static int ti_port_probe(struct usb_serial_port *port) tport->tp_uart_base_addr = TI_UART1_BASE_ADDR; else tport->tp_uart_base_addr = TI_UART2_BASE_ADDR; - tport->tp_closing_wait = closing_wait; + port->port.closing_wait = msecs_to_jiffies(10 * closing_wait); init_waitqueue_head(&tport->tp_write_wait); if (kfifo_alloc(&tport->write_fifo, TI_WRITE_BUF_SIZE, GFP_KERNEL)) { kfree(tport); @@ -480,8 +475,6 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) port_number = port->number - port->serial->minor; - memset(&(tport->tp_icount), 0x00, sizeof(tport->tp_icount)); - tport->tp_msr = 0; tport->tp_shadow_mcr |= (TI_MCR_RTS | TI_MCR_DTR); @@ -585,6 +578,8 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) tport->tp_is_open = 1; ++tdev->td_open_port_count; + port->port.drain_delay = 3; + goto release_lock; unlink_int_urb: @@ -604,6 +599,7 @@ static void ti_close(struct usb_serial_port *port) int port_number; int status; int do_unlock; + unsigned long flags; tdev = usb_get_serial_data(port->serial); tport = usb_get_serial_port_data(port); @@ -612,11 +608,12 @@ static void ti_close(struct usb_serial_port *port) tport->tp_is_open = 0; - ti_drain(tport, (tport->tp_closing_wait*HZ)/100, 1); - usb_kill_urb(port->read_urb); usb_kill_urb(port->write_urb); tport->tp_write_urb_in_use = 0; + spin_lock_irqsave(&tport->tp_lock, flags); + kfifo_reset_out(&tport->write_fifo); + spin_unlock_irqrestore(&tport->tp_lock, flags); port_number = port->number - port->serial->minor; @@ -687,6 +684,8 @@ static int ti_chars_in_buffer(struct tty_struct *tty) struct ti_port *tport = usb_get_serial_port_data(port); int chars = 0; unsigned long flags; + int ret; + u8 lsr; if (tport == NULL) return 0; @@ -695,6 +694,12 @@ static int ti_chars_in_buffer(struct tty_struct *tty) chars = kfifo_len(&tport->write_fifo); spin_unlock_irqrestore(&tport->tp_lock, flags); + if (!chars) { + ret = ti_get_lsr(tport, &lsr); + if (!ret && !(lsr & TI_LSR_TX_EMPTY)) + chars = 1; + } + dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); return chars; } @@ -731,38 +736,11 @@ static void ti_unthrottle(struct tty_struct *tty) } } -static int ti_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - struct usb_serial_port *port = tty->driver_data; - struct ti_port *tport = usb_get_serial_port_data(port); - struct async_icount cnow = tport->tp_icount; - - dev_dbg(&port->dev, "%s - TIOCGICOUNT RX=%d, TX=%d\n", __func__, - cnow.rx, cnow.tx); - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - - return 0; -} - static int ti_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); - struct async_icount cnow; - struct async_icount cprev; dev_dbg(&port->dev, "%s - cmd = 0x%04X\n", __func__, cmd); @@ -778,29 +756,6 @@ static int ti_ioctl(struct tty_struct *tty, dev_dbg(&port->dev, "%s - TIOCSSERIAL\n", __func__); return ti_set_serial_info(tty, tport, (struct serial_struct __user *)arg); - case TIOCMIWAIT: - dev_dbg(&port->dev, "%s - TIOCMIWAIT\n", __func__); - cprev = tport->tp_icount; - while (1) { - interruptible_sleep_on(&port->delta_msr_wait); - if (signal_pending(current)) - return -ERESTARTSYS; - - if (port->serial->disconnected) - return -EIO; - - cnow = tport->tp_icount; - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) - return 0; - cprev = cnow; - } - break; } return -ENOIOCTLCMD; } @@ -1018,8 +973,6 @@ static void ti_break(struct tty_struct *tty, int break_state) if (tport == NULL) return; - ti_drain(tport, (tport->tp_closing_wait*HZ)/100, 0); - status = ti_write_byte(port, tport->tp_tdev, tport->tp_uart_base_addr + TI_UART_OFFSET_LCR, TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0); @@ -1156,7 +1109,7 @@ static void ti_bulk_in_callback(struct urb *urb) else ti_recv(port, urb->transfer_buffer, urb->actual_length); spin_lock(&tport->tp_lock); - tport->tp_icount.rx += urb->actual_length; + port->icount.rx += urb->actual_length; spin_unlock(&tport->tp_lock); } @@ -1264,7 +1217,7 @@ static void ti_send(struct ti_port *tport) /* TODO: reschedule ti_send */ } else { spin_lock_irqsave(&tport->tp_lock, flags); - tport->tp_icount.tx += count; + port->icount.tx += count; spin_unlock_irqrestore(&tport->tp_lock, flags); } @@ -1297,7 +1250,7 @@ static int ti_set_mcr(struct ti_port *tport, unsigned int mcr) } -static int ti_get_lsr(struct ti_port *tport) +static int ti_get_lsr(struct ti_port *tport, u8 *lsr) { int size, status; struct ti_device *tdev = tport->tp_tdev; @@ -1323,7 +1276,7 @@ static int ti_get_lsr(struct ti_port *tport) dev_dbg(&port->dev, "%s - lsr 0x%02X\n", __func__, data->bLSR); - tport->tp_lsr = data->bLSR; + *lsr = data->bLSR; free_data: kfree(data); @@ -1336,10 +1289,15 @@ static int ti_get_serial_info(struct ti_port *tport, { struct usb_serial_port *port = tport->tp_port; struct serial_struct ret_serial; + unsigned cwait; if (!ret_arg) return -EFAULT; + cwait = port->port.closing_wait; + if (cwait != ASYNC_CLOSING_WAIT_NONE) + cwait = jiffies_to_msecs(cwait) / 10; + memset(&ret_serial, 0, sizeof(ret_serial)); ret_serial.type = PORT_16550A; @@ -1348,7 +1306,7 @@ static int ti_get_serial_info(struct ti_port *tport, ret_serial.flags = tport->tp_flags; ret_serial.xmit_fifo_size = TI_WRITE_BUF_SIZE; ret_serial.baud_base = tport->tp_tdev->td_is_3410 ? 921600 : 460800; - ret_serial.closing_wait = tport->tp_closing_wait; + ret_serial.closing_wait = cwait; if (copy_to_user(ret_arg, &ret_serial, sizeof(*ret_arg))) return -EFAULT; @@ -1361,12 +1319,17 @@ static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport, struct serial_struct __user *new_arg) { struct serial_struct new_serial; + unsigned cwait; if (copy_from_user(&new_serial, new_arg, sizeof(new_serial))) return -EFAULT; + cwait = new_serial.closing_wait; + if (cwait != ASYNC_CLOSING_WAIT_NONE) + cwait = msecs_to_jiffies(10 * new_serial.closing_wait); + tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS; - tport->tp_closing_wait = new_serial.closing_wait; + tport->tp_port->port.closing_wait = cwait; return 0; } @@ -1382,7 +1345,7 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr) if (msr & TI_MSR_DELTA_MASK) { spin_lock_irqsave(&tport->tp_lock, flags); - icount = &tport->tp_icount; + icount = &tport->tp_port->icount; if (msr & TI_MSR_DELTA_CTS) icount->cts++; if (msr & TI_MSR_DELTA_DSR) @@ -1391,7 +1354,7 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr) icount->dcd++; if (msr & TI_MSR_DELTA_RI) icount->rng++; - wake_up_interruptible(&tport->tp_port->delta_msr_wait); + wake_up_interruptible(&tport->tp_port->port.delta_msr_wait); spin_unlock_irqrestore(&tport->tp_lock, flags); } @@ -1411,56 +1374,6 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr) } -static void ti_drain(struct ti_port *tport, unsigned long timeout, int flush) -{ - struct ti_device *tdev = tport->tp_tdev; - struct usb_serial_port *port = tport->tp_port; - wait_queue_t wait; - - spin_lock_irq(&tport->tp_lock); - - /* wait for data to drain from the buffer */ - tdev->td_urb_error = 0; - init_waitqueue_entry(&wait, current); - add_wait_queue(&tport->tp_write_wait, &wait); - for (;;) { - set_current_state(TASK_INTERRUPTIBLE); - if (kfifo_len(&tport->write_fifo) == 0 - || timeout == 0 || signal_pending(current) - || tdev->td_urb_error - || port->serial->disconnected) /* disconnect */ - break; - spin_unlock_irq(&tport->tp_lock); - timeout = schedule_timeout(timeout); - spin_lock_irq(&tport->tp_lock); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&tport->tp_write_wait, &wait); - - /* flush any remaining data in the buffer */ - if (flush) - kfifo_reset_out(&tport->write_fifo); - - spin_unlock_irq(&tport->tp_lock); - - mutex_lock(&port->serial->disc_mutex); - /* wait for data to drain from the device */ - /* wait for empty tx register, plus 20 ms */ - timeout += jiffies; - tport->tp_lsr &= ~TI_LSR_TX_EMPTY; - while ((long)(jiffies - timeout) < 0 && !signal_pending(current) - && !(tport->tp_lsr&TI_LSR_TX_EMPTY) && !tdev->td_urb_error - && !port->serial->disconnected) { - if (ti_get_lsr(tport)) - break; - mutex_unlock(&port->serial->disc_mutex); - msleep_interruptible(20); - mutex_lock(&port->serial->disc_mutex); - } - mutex_unlock(&port->serial->disc_mutex); -} - - static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty) { unsigned long flags; diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 650be17a68f2..cf75beb1251b 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1,6 +1,7 @@ /* * USB Serial Converter driver * + * Copyright (C) 2009 - 2013 Johan Hovold (jhovold@gmail.com) * Copyright (C) 1999 - 2012 Greg Kroah-Hartman (greg@kroah.com) * Copyright (C) 2000 Peter Berger (pberger@brimson.com) * Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com) @@ -14,7 +15,6 @@ * * See Documentation/usb/usb-serial.txt for more information on using this * driver - * */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt @@ -49,7 +49,6 @@ drivers depend on it. */ -/* initially all NULL */ static struct usb_serial *serial_table[SERIAL_TTY_MINORS]; static DEFINE_MUTEX(table_lock); static LIST_HEAD(usb_serial_driver_list); @@ -139,7 +138,7 @@ static void destroy_serial(struct kref *kref) if (serial->minor != SERIAL_TTY_NO_MINOR) return_serial(serial); - if (serial->attached) + if (serial->attached && serial->type->release) serial->type->release(serial); /* Now that nothing is using the ports, they can be freed */ @@ -225,7 +224,7 @@ static int serial_install(struct tty_driver *driver, struct tty_struct *tty) return retval; } -static int serial_activate(struct tty_port *tport, struct tty_struct *tty) +static int serial_port_activate(struct tty_port *tport, struct tty_struct *tty) { struct usb_serial_port *port = container_of(tport, struct usb_serial_port, port); @@ -249,30 +248,27 @@ static int serial_open(struct tty_struct *tty, struct file *filp) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); + dev_dbg(tty->dev, "%s\n", __func__); + return tty_port_open(&port->port, tty, filp); } /** - * serial_down - shut down hardware + * serial_port_shutdown - shut down hardware * @tport: tty port to shut down * - * Shut down a USB serial port unless it is the console. We never - * shut down the console hardware as it will always be in use. Serialized - * against activate by the tport mutex and kept to matching open/close pairs + * Shut down a USB serial port. Serialized against activate by the + * tport mutex and kept to matching open/close pairs * of calls by the ASYNCB_INITIALIZED flag. + * + * Not called if tty is console. */ -static void serial_down(struct tty_port *tport) +static void serial_port_shutdown(struct tty_port *tport) { struct usb_serial_port *port = container_of(tport, struct usb_serial_port, port); struct usb_serial_driver *drv = port->serial->type; - /* - * The console is magical. Do not hang up the console hardware - * or there will be tears. - */ - if (port->port.console) - return; + if (drv->close) drv->close(port); } @@ -281,7 +277,8 @@ static void serial_hangup(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); + dev_dbg(tty->dev, "%s\n", __func__); + tty_port_hangup(&port->port); } @@ -289,7 +286,8 @@ static void serial_close(struct tty_struct *tty, struct file *filp) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); + dev_dbg(tty->dev, "%s\n", __func__); + tty_port_close(&port->port, tty, filp); } @@ -308,14 +306,14 @@ static void serial_cleanup(struct tty_struct *tty) struct usb_serial *serial; struct module *owner; + dev_dbg(tty->dev, "%s\n", __func__); + /* The console is magical. Do not hang up the console hardware * or there will be tears. */ if (port->port.console) return; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); - tty->driver_data = NULL; serial = port->serial; @@ -339,10 +337,8 @@ static int serial_write(struct tty_struct *tty, const unsigned char *buf, if (port->serial->dev->state == USB_STATE_NOTATTACHED) goto exit; - dev_dbg(tty->dev, "%s - port %d, %d byte(s)\n", __func__, - port->number, count); + dev_dbg(tty->dev, "%s - %d byte(s)\n", __func__, count); - /* pass on to the driver specific version of this function */ retval = port->serial->type->write(tty, port, buf, count); if (retval < 0) retval = usb_translate_errors(retval); @@ -354,8 +350,8 @@ static int serial_write_room(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); - /* pass on to the driver specific version of this function */ + dev_dbg(tty->dev, "%s\n", __func__); + return port->serial->type->write_room(tty); } @@ -365,7 +361,7 @@ static int serial_chars_in_buffer(struct tty_struct *tty) struct usb_serial *serial = port->serial; int count = 0; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); + dev_dbg(tty->dev, "%s\n", __func__); mutex_lock(&serial->disc_mutex); /* if the device was unplugged then any remaining characters @@ -383,9 +379,8 @@ static void serial_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); + dev_dbg(tty->dev, "%s\n", __func__); - /* pass on to the driver specific version of this function */ if (port->serial->type->throttle) port->serial->type->throttle(tty); } @@ -394,9 +389,8 @@ static void serial_unthrottle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); + dev_dbg(tty->dev, "%s\n", __func__); - /* pass on to the driver specific version of this function */ if (port->serial->type->unthrottle) port->serial->type->unthrottle(tty); } @@ -407,15 +401,20 @@ static int serial_ioctl(struct tty_struct *tty, struct usb_serial_port *port = tty->driver_data; int retval = -ENODEV; - dev_dbg(tty->dev, "%s - port %d, cmd 0x%.4x\n", __func__, - port->number, cmd); + dev_dbg(tty->dev, "%s - cmd 0x%.4x\n", __func__, cmd); + + switch (cmd) { + case TIOCMIWAIT: + if (port->serial->type->tiocmiwait) + retval = port->serial->type->tiocmiwait(tty, arg); + break; + default: + if (port->serial->type->ioctl) + retval = port->serial->type->ioctl(tty, cmd, arg); + else + retval = -ENOIOCTLCMD; + } - /* pass on to the driver specific version of this function - if it is available */ - if (port->serial->type->ioctl) { - retval = port->serial->type->ioctl(tty, cmd, arg); - } else - retval = -ENOIOCTLCMD; return retval; } @@ -423,10 +422,8 @@ static void serial_set_termios(struct tty_struct *tty, struct ktermios *old) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); + dev_dbg(tty->dev, "%s\n", __func__); - /* pass on to the driver specific version of this function - if it is available */ if (port->serial->type->set_termios) port->serial->type->set_termios(tty, port, old); else @@ -437,12 +434,11 @@ static int serial_break(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); + dev_dbg(tty->dev, "%s\n", __func__); - /* pass on to the driver specific version of this function - if it is available */ if (port->serial->type->break_ctl) port->serial->type->break_ctl(tty, break_state); + return 0; } @@ -496,7 +492,7 @@ static int serial_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); + dev_dbg(tty->dev, "%s\n", __func__); if (port->serial->type->tiocmget) return port->serial->type->tiocmget(tty); @@ -508,7 +504,7 @@ static int serial_tiocmset(struct tty_struct *tty, { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); + dev_dbg(tty->dev, "%s\n", __func__); if (port->serial->type->tiocmset) return port->serial->type->tiocmset(tty, set, clear); @@ -520,7 +516,7 @@ static int serial_get_icount(struct tty_struct *tty, { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s - port %d\n", __func__, port->number); + dev_dbg(tty->dev, "%s\n", __func__); if (port->serial->type->get_icount) return port->serial->type->get_icount(tty, icount); @@ -546,43 +542,39 @@ static void usb_serial_port_work(struct work_struct *work) tty_port_tty_wakeup(&port->port); } -static void kill_traffic(struct usb_serial_port *port) +static void usb_serial_port_poison_urbs(struct usb_serial_port *port) { int i; for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) - usb_kill_urb(port->read_urbs[i]); + usb_poison_urb(port->read_urbs[i]); for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) - usb_kill_urb(port->write_urbs[i]); - /* - * This is tricky. - * Some drivers submit the read_urb in the - * handler for the write_urb or vice versa - * this order determines the order in which - * usb_kill_urb() must be used to reliably - * kill the URBs. As it is unknown here, - * both orders must be used in turn. - * The call below is not redundant. - */ - usb_kill_urb(port->read_urb); - usb_kill_urb(port->interrupt_in_urb); - usb_kill_urb(port->interrupt_out_urb); + usb_poison_urb(port->write_urbs[i]); + + usb_poison_urb(port->interrupt_in_urb); + usb_poison_urb(port->interrupt_out_urb); +} + +static void usb_serial_port_unpoison_urbs(struct usb_serial_port *port) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) + usb_unpoison_urb(port->read_urbs[i]); + for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) + usb_unpoison_urb(port->write_urbs[i]); + + usb_unpoison_urb(port->interrupt_in_urb); + usb_unpoison_urb(port->interrupt_out_urb); } -static void port_release(struct device *dev) +static void usb_serial_port_release(struct device *dev) { struct usb_serial_port *port = to_usb_serial_port(dev); int i; dev_dbg(dev, "%s\n", __func__); - /* - * Stop all the traffic before cancelling the work, so that - * nobody will restart it by calling usb_serial_port_softint. - */ - kill_traffic(port); - cancel_work_sync(&port->work); - usb_free_urb(port->interrupt_in_urb); usb_free_urb(port->interrupt_out_urb); for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) { @@ -607,10 +599,8 @@ static struct usb_serial *create_serial(struct usb_device *dev, struct usb_serial *serial; serial = kzalloc(sizeof(*serial), GFP_KERNEL); - if (!serial) { - dev_err(&dev->dev, "%s - out of memory\n", __func__); + if (!serial) return NULL; - } serial->dev = usb_get_dev(dev); serial->type = driver; serial->interface = usb_get_intf(interface); @@ -673,7 +663,7 @@ static struct usb_serial_driver *search_serial_device( return NULL; } -static int serial_carrier_raised(struct tty_port *port) +static int serial_port_carrier_raised(struct tty_port *port) { struct usb_serial_port *p = container_of(port, struct usb_serial_port, port); struct usb_serial_driver *drv = p->serial->type; @@ -684,7 +674,7 @@ static int serial_carrier_raised(struct tty_port *port) return 1; } -static void serial_dtr_rts(struct tty_port *port, int on) +static void serial_port_dtr_rts(struct tty_port *port, int on) { struct usb_serial_port *p = container_of(port, struct usb_serial_port, port); struct usb_serial *serial = p->serial; @@ -704,10 +694,10 @@ static void serial_dtr_rts(struct tty_port *port, int on) } static const struct tty_port_operations serial_port_ops = { - .carrier_raised = serial_carrier_raised, - .dtr_rts = serial_dtr_rts, - .activate = serial_activate, - .shutdown = serial_down, + .carrier_raised = serial_port_carrier_raised, + .dtr_rts = serial_port_dtr_rts, + .activate = serial_port_activate, + .shutdown = serial_port_shutdown, }; static int usb_serial_probe(struct usb_interface *interface, @@ -754,7 +744,6 @@ static int usb_serial_probe(struct usb_interface *interface, serial = create_serial(dev, interface, type); if (!serial) { module_put(type->driver.owner); - dev_err(ddev, "%s - out of memory\n", __func__); return -ENOMEM; } @@ -895,7 +884,6 @@ static int usb_serial_probe(struct usb_interface *interface, port->port.ops = &serial_port_ops; port->serial = serial; spin_lock_init(&port->lock); - init_waitqueue_head(&port->delta_msr_wait); /* Keep this for private driver use for the moment but should probably go away */ INIT_WORK(&port->work, usb_serial_port_work); @@ -903,7 +891,7 @@ static int usb_serial_probe(struct usb_interface *interface, port->dev.parent = &interface->dev; port->dev.driver = NULL; port->dev.bus = &usb_serial_bus_type; - port->dev.release = &port_release; + port->dev.release = &usb_serial_port_release; device_initialize(&port->dev); } @@ -919,16 +907,12 @@ static int usb_serial_probe(struct usb_interface *interface, for (j = 0; j < ARRAY_SIZE(port->read_urbs); ++j) { set_bit(j, &port->read_urbs_free); port->read_urbs[j] = usb_alloc_urb(0, GFP_KERNEL); - if (!port->read_urbs[j]) { - dev_err(ddev, "No free urbs available\n"); + if (!port->read_urbs[j]) goto probe_error; - } port->bulk_in_buffers[j] = kmalloc(buffer_size, GFP_KERNEL); - if (!port->bulk_in_buffers[j]) { - dev_err(ddev, "Couldn't allocate bulk_in_buffer\n"); + if (!port->bulk_in_buffers[j]) goto probe_error; - } usb_fill_bulk_urb(port->read_urbs[j], dev, usb_rcvbulkpipe(dev, endpoint->bEndpointAddress), @@ -955,16 +939,12 @@ static int usb_serial_probe(struct usb_interface *interface, for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j) { set_bit(j, &port->write_urbs_free); port->write_urbs[j] = usb_alloc_urb(0, GFP_KERNEL); - if (!port->write_urbs[j]) { - dev_err(ddev, "No free urbs available\n"); + if (!port->write_urbs[j]) goto probe_error; - } port->bulk_out_buffers[j] = kmalloc(buffer_size, GFP_KERNEL); - if (!port->bulk_out_buffers[j]) { - dev_err(ddev, "Couldn't allocate bulk_out_buffer\n"); + if (!port->bulk_out_buffers[j]) goto probe_error; - } usb_fill_bulk_urb(port->write_urbs[j], dev, usb_sndbulkpipe(dev, endpoint->bEndpointAddress), @@ -982,19 +962,15 @@ static int usb_serial_probe(struct usb_interface *interface, endpoint = interrupt_in_endpoint[i]; port = serial->port[i]; port->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!port->interrupt_in_urb) { - dev_err(ddev, "No free urbs available\n"); + if (!port->interrupt_in_urb) goto probe_error; - } buffer_size = usb_endpoint_maxp(endpoint); port->interrupt_in_endpointAddress = endpoint->bEndpointAddress; port->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL); - if (!port->interrupt_in_buffer) { - dev_err(ddev, "Couldn't allocate interrupt_in_buffer\n"); + if (!port->interrupt_in_buffer) goto probe_error; - } usb_fill_int_urb(port->interrupt_in_urb, dev, usb_rcvintpipe(dev, endpoint->bEndpointAddress), @@ -1011,20 +987,16 @@ static int usb_serial_probe(struct usb_interface *interface, endpoint = interrupt_out_endpoint[i]; port = serial->port[i]; port->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!port->interrupt_out_urb) { - dev_err(ddev, "No free urbs available\n"); + if (!port->interrupt_out_urb) goto probe_error; - } buffer_size = usb_endpoint_maxp(endpoint); port->interrupt_out_size = buffer_size; port->interrupt_out_endpointAddress = endpoint->bEndpointAddress; port->interrupt_out_buffer = kmalloc(buffer_size, GFP_KERNEL); - if (!port->interrupt_out_buffer) { - dev_err(ddev, "Couldn't allocate interrupt_out_buffer\n"); + if (!port->interrupt_out_buffer) goto probe_error; - } usb_fill_int_urb(port->interrupt_out_urb, dev, usb_sndintpipe(dev, endpoint->bEndpointAddress), @@ -1113,13 +1085,15 @@ static void usb_serial_disconnect(struct usb_interface *interface) tty_vhangup(tty); tty_kref_put(tty); } - kill_traffic(port); + usb_serial_port_poison_urbs(port); + wake_up_interruptible(&port->port.delta_msr_wait); cancel_work_sync(&port->work); if (device_is_registered(&port->dev)) device_del(&port->dev); } } - serial->type->disconnect(serial); + if (serial->type->disconnect) + serial->type->disconnect(serial); /* let the last holder of this object cause it to be cleaned up */ usb_serial_put(serial); @@ -1134,6 +1108,11 @@ int usb_serial_suspend(struct usb_interface *intf, pm_message_t message) serial->suspending = 1; + /* + * serial->type->suspend() MUST return 0 in system sleep context, + * otherwise, the resume callback has to recover device from + * previous suspend failure. + */ if (serial->type->suspend) { r = serial->type->suspend(serial, message); if (r < 0) { @@ -1145,7 +1124,7 @@ int usb_serial_suspend(struct usb_interface *intf, pm_message_t message) for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; if (port) - kill_traffic(port); + usb_serial_port_poison_urbs(port); } err_out: @@ -1153,11 +1132,25 @@ err_out: } EXPORT_SYMBOL(usb_serial_suspend); +static void usb_serial_unpoison_port_urbs(struct usb_serial *serial) +{ + struct usb_serial_port *port; + int i; + + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + if (port) + usb_serial_port_unpoison_urbs(port); + } +} + int usb_serial_resume(struct usb_interface *intf) { struct usb_serial *serial = usb_get_intfdata(intf); int rv; + usb_serial_unpoison_port_urbs(serial); + serial->suspending = 0; if (serial->type->resume) rv = serial->type->resume(serial); @@ -1173,6 +1166,8 @@ static int usb_serial_reset_resume(struct usb_interface *intf) struct usb_serial *serial = usb_get_intfdata(intf); int rv; + usb_serial_unpoison_port_urbs(serial); + serial->suspending = 0; if (serial->type->reset_resume) rv = serial->type->reset_resume(serial); @@ -1309,12 +1304,12 @@ module_exit(usb_serial_exit); do { \ if (!type->function) { \ type->function = usb_serial_generic_##function; \ - pr_debug("Had to override the " #function \ - " usb serial operation with the generic one.");\ - } \ + pr_debug("%s: using generic " #function "\n", \ + type->driver.name); \ + } \ } while (0) -static void fixup_generic(struct usb_serial_driver *device) +static void usb_serial_operations_init(struct usb_serial_driver *device) { set_to_generic_if_null(device, open); set_to_generic_if_null(device, write); @@ -1323,8 +1318,6 @@ static void fixup_generic(struct usb_serial_driver *device) set_to_generic_if_null(device, chars_in_buffer); set_to_generic_if_null(device, read_bulk_callback); set_to_generic_if_null(device, write_bulk_callback); - set_to_generic_if_null(device, disconnect); - set_to_generic_if_null(device, release); set_to_generic_if_null(device, process_read_urb); set_to_generic_if_null(device, prepare_write_buffer); } @@ -1336,8 +1329,6 @@ static int usb_serial_register(struct usb_serial_driver *driver) if (usb_disabled()) return -ENODEV; - fixup_generic(driver); - if (!driver->description) driver->description = driver->driver.name; if (!driver->usb_driver) { @@ -1346,6 +1337,8 @@ static int usb_serial_register(struct usb_serial_driver *driver) return -EINVAL; } + usb_serial_operations_init(driver); + /* Add this device to our list of devices */ mutex_lock(&table_lock); list_add(&driver->driver_list, &usb_serial_driver_list); @@ -1463,7 +1456,6 @@ void usb_serial_deregister_drivers(struct usb_serial_driver *const serial_driver } EXPORT_SYMBOL_GPL(usb_serial_deregister_drivers); -/* Module information */ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 571965aa1cc0..ece326ef63a0 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -421,20 +421,19 @@ void usb_wwan_close(struct usb_serial_port *port) portdata = usb_get_serial_port_data(port); - if (serial->dev) { - /* Stop reading/writing urbs */ - spin_lock_irq(&intfdata->susp_lock); - portdata->opened = 0; - spin_unlock_irq(&intfdata->susp_lock); + /* Stop reading/writing urbs */ + spin_lock_irq(&intfdata->susp_lock); + portdata->opened = 0; + spin_unlock_irq(&intfdata->susp_lock); - for (i = 0; i < N_IN_URB; i++) - usb_kill_urb(portdata->in_urbs[i]); - for (i = 0; i < N_OUT_URB; i++) - usb_kill_urb(portdata->out_urbs[i]); - /* balancing - important as an error cannot be handled*/ - usb_autopm_get_interface_no_resume(serial->interface); - serial->interface->needs_remote_wakeup = 0; - } + for (i = 0; i < N_IN_URB; i++) + usb_kill_urb(portdata->in_urbs[i]); + for (i = 0; i < N_OUT_URB; i++) + usb_kill_urb(portdata->out_urbs[i]); + + /* balancing - important as an error cannot be handled*/ + usb_autopm_get_interface_no_resume(serial->interface); + serial->interface->needs_remote_wakeup = 0; } EXPORT_SYMBOL(usb_wwan_close); diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 1129aa73c23e..7573ec8a084f 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -257,24 +257,18 @@ static void visor_close(struct usb_serial_port *port) { unsigned char *transfer_buffer; - /* shutdown our urbs */ usb_serial_generic_close(port); usb_kill_urb(port->interrupt_in_urb); - mutex_lock(&port->serial->disc_mutex); - if (!port->serial->disconnected) { - /* Try to send shutdown message, unless the device is gone */ - transfer_buffer = kmalloc(0x12, GFP_KERNEL); - if (transfer_buffer) { - usb_control_msg(port->serial->dev, + transfer_buffer = kmalloc(0x12, GFP_KERNEL); + if (!transfer_buffer) + return; + usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), VISOR_CLOSE_NOTIFICATION, 0xc2, 0x0000, 0x0000, transfer_buffer, 0x12, 300); - kfree(transfer_buffer); - } - } - mutex_unlock(&port->serial->disc_mutex); + kfree(transfer_buffer); } static void visor_read_int_callback(struct urb *urb) diff --git a/drivers/usb/serial/wishbone-serial.c b/drivers/usb/serial/wishbone-serial.c new file mode 100644 index 000000000000..100573c6f19e --- /dev/null +++ b/drivers/usb/serial/wishbone-serial.c @@ -0,0 +1,95 @@ +/* + * USB Wishbone-Serial adapter driver + * + * Copyright (C) 2013 Wesley W. Terpstra <w.terpstra@gsi.de> + * Copyright (C) 2013 GSI Helmholtz Centre for Heavy Ion Research GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/tty.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/uaccess.h> + +#define GSI_VENDOR_OPENCLOSE 0xB0 + +static const struct usb_device_id id_table[] = { + { USB_DEVICE_AND_INTERFACE_INFO(0x1D50, 0x6062, 0xFF, 0xFF, 0xFF) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +/* + * Etherbone must be told that a new stream has begun before data arrives. + * This is necessary to restart the negotiation of Wishbone bus parameters. + * Similarly, when the stream ends, Etherbone must be told so that the cycle + * line can be driven low in the case that userspace failed to do so. + */ +static int usb_gsi_openclose(struct usb_serial_port *port, int value) +{ + struct usb_device *dev = port->serial->dev; + + return usb_control_msg( + dev, + usb_sndctrlpipe(dev, 0), /* Send to EP0OUT */ + GSI_VENDOR_OPENCLOSE, + USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, + value, /* wValue = device is open(1) or closed(0) */ + port->serial->interface->cur_altsetting->desc.bInterfaceNumber, + NULL, 0, /* There is no data stage */ + 5000); /* Timeout till operation fails */ +} + +static int wishbone_serial_open(struct tty_struct *tty, + struct usb_serial_port *port) +{ + int retval; + + retval = usb_gsi_openclose(port, 1); + if (retval) { + dev_err(&port->serial->dev->dev, + "Could not mark device as open (%d)\n", + retval); + return retval; + } + + retval = usb_serial_generic_open(tty, port); + if (retval) + usb_gsi_openclose(port, 0); + + return retval; +} + +static void wishbone_serial_close(struct usb_serial_port *port) +{ + usb_serial_generic_close(port); + usb_gsi_openclose(port, 0); +} + +static struct usb_serial_driver wishbone_serial_device = { + .driver = { + .owner = THIS_MODULE, + .name = "wishbone_serial", + }, + .id_table = id_table, + .num_ports = 1, + .open = &wishbone_serial_open, + .close = &wishbone_serial_close, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &wishbone_serial_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_AUTHOR("Wesley W. Terpstra <w.terpstra@gsi.de>"); +MODULE_DESCRIPTION("USB Wishbone-Serial adapter"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index eab04a6b5fbc..8470e1b114f2 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -4,11 +4,10 @@ comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may" comment "also be needed; see USB_STORAGE Help for more info" - depends on USB config USB_STORAGE tristate "USB Mass Storage support" - depends on USB && SCSI + depends on SCSI ---help--- Say Y here if you want to connect USB mass storage devices to your computer's USB port. This is the driver you need for USB @@ -188,7 +187,7 @@ config USB_STORAGE_CYPRESS_ATACB config USB_STORAGE_ENE_UB6250 tristate "USB ENE card reader support" - depends on USB && SCSI + depends on SCSI depends on USB_STORAGE ---help--- Say Y here if you wish to control a ENE SD/MS Card reader. @@ -203,7 +202,7 @@ config USB_STORAGE_ENE_UB6250 config USB_UAS tristate "USB Attached SCSI" - depends on USB && SCSI && BROKEN + depends on SCSI && BROKEN help The USB Attached SCSI protocol is supported by some USB storage devices. It permits higher performance by supporting diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c index be5564cc8e01..77a2ddfe6487 100644 --- a/drivers/usb/storage/alauda.c +++ b/drivers/usb/storage/alauda.c @@ -326,8 +326,7 @@ static int alauda_get_media_status(struct us_data *us, unsigned char *data) rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe, command, 0xc0, 0, 1, data, 2); - US_DEBUGP("alauda_get_media_status: Media status %02X %02X\n", - data[0], data[1]); + usb_stor_dbg(us, "Media status %02X %02X\n", data[0], data[1]); return rc; } @@ -402,7 +401,7 @@ static int alauda_init_media(struct us_data *us) ready = 1; } - US_DEBUGP("alauda_init_media: We are ready for action!\n"); + usb_stor_dbg(us, "We are ready for action!\n"); if (alauda_ack_media(us) != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; @@ -413,15 +412,15 @@ static int alauda_init_media(struct us_data *us) return USB_STOR_TRANSPORT_ERROR; if (data[0] != 0x14) { - US_DEBUGP("alauda_init_media: Media not ready after ack\n"); + usb_stor_dbg(us, "Media not ready after ack\n"); return USB_STOR_TRANSPORT_ERROR; } if (alauda_get_media_signature(us, data) != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - US_DEBUGP("alauda_init_media: Media signature: %02X %02X %02X %02X\n", - data[0], data[1], data[2], data[3]); + usb_stor_dbg(us, "Media signature: %02X %02X %02X %02X\n", + data[0], data[1], data[2], data[3]); media_info = alauda_card_find_id(data[1]); if (media_info == NULL) { printk(KERN_WARNING @@ -432,8 +431,8 @@ static int alauda_init_media(struct us_data *us) } MEDIA_INFO(us).capacity = 1 << media_info->chipshift; - US_DEBUGP("Found media with capacity: %ldMB\n", - MEDIA_INFO(us).capacity >> 20); + usb_stor_dbg(us, "Found media with capacity: %ldMB\n", + MEDIA_INFO(us).capacity >> 20); MEDIA_INFO(us).pageshift = media_info->pageshift; MEDIA_INFO(us).blockshift = media_info->blockshift; @@ -472,7 +471,7 @@ static int alauda_check_media(struct us_data *us) /* Check for no media or door open */ if ((status[0] & 0x80) || ((status[0] & 0x1F) == 0x10) || ((status[1] & 0x01) == 0)) { - US_DEBUGP("alauda_check_media: No media, or door open\n"); + usb_stor_dbg(us, "No media, or door open\n"); alauda_free_maps(&MEDIA_INFO(us)); info->sense_key = 0x02; info->sense_asc = 0x3A; @@ -482,7 +481,7 @@ static int alauda_check_media(struct us_data *us) /* Check for media change */ if (status[0] & 0x08) { - US_DEBUGP("alauda_check_media: Media change detected\n"); + usb_stor_dbg(us, "Media change detected\n"); alauda_free_maps(&MEDIA_INFO(us)); alauda_init_media(us); @@ -518,7 +517,7 @@ static int alauda_check_status2(struct us_data *us) if (rc != USB_STOR_XFER_GOOD) return rc; - US_DEBUGP("alauda_check_status2: %02X %02X %02X\n", data[0], data[1], data[2]); + usb_stor_dbg(us, "%02X %02X %02X\n", data[0], data[1], data[2]); if (data[0] & ALAUDA_STATUS_ERROR) return USB_STOR_XFER_ERROR; @@ -584,7 +583,7 @@ static int alauda_read_map(struct us_data *us, unsigned int zone) goto error; } - US_DEBUGP("alauda_read_map: Mapping blocks for zone %d\n", zone); + usb_stor_dbg(us, "Mapping blocks for zone %d\n", zone); /* 1024 PBA's per zone */ for (i = 0; i < zonesize; i++) @@ -604,7 +603,7 @@ static int alauda_read_map(struct us_data *us, unsigned int zone) if (data[j] != 0) goto nonz; pba_to_lba[i] = UNUSABLE; - US_DEBUGP("alauda_read_map: PBA %d has no logical mapping\n", blocknum); + usb_stor_dbg(us, "PBA %d has no logical mapping\n", blocknum); continue; nonz: @@ -617,19 +616,18 @@ static int alauda_read_map(struct us_data *us, unsigned int zone) nonff: /* normal PBAs start with six FFs */ if (j < 6) { - US_DEBUGP("alauda_read_map: PBA %d has no logical mapping: " - "reserved area = %02X%02X%02X%02X " - "data status %02X block status %02X\n", - blocknum, data[0], data[1], data[2], data[3], - data[4], data[5]); + usb_stor_dbg(us, "PBA %d has no logical mapping: reserved area = %02X%02X%02X%02X data status %02X block status %02X\n", + blocknum, + data[0], data[1], data[2], data[3], + data[4], data[5]); pba_to_lba[i] = UNUSABLE; continue; } if ((data[6] >> 4) != 0x01) { - US_DEBUGP("alauda_read_map: PBA %d has invalid address " - "field %02X%02X/%02X%02X\n", - blocknum, data[6], data[7], data[11], data[12]); + usb_stor_dbg(us, "PBA %d has invalid address field %02X%02X/%02X%02X\n", + blocknum, data[6], data[7], + data[11], data[12]); pba_to_lba[i] = UNUSABLE; continue; } @@ -711,7 +709,7 @@ static int alauda_erase_block(struct us_data *us, u16 pba) }; unsigned char buf[2]; - US_DEBUGP("alauda_erase_block: Erasing PBA %d\n", pba); + usb_stor_dbg(us, "Erasing PBA %d\n", pba); rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, command, 9, NULL); @@ -723,8 +721,7 @@ static int alauda_erase_block(struct us_data *us, u16 pba) if (rc != USB_STOR_XFER_GOOD) return rc; - US_DEBUGP("alauda_erase_block: Erase result: %02X %02X\n", - buf[0], buf[1]); + usb_stor_dbg(us, "Erase result: %02X %02X\n", buf[0], buf[1]); return rc; } @@ -741,8 +738,7 @@ static int alauda_read_block_raw(struct us_data *us, u16 pba, PBA_ZONE(pba), 0, PBA_LO(pba) + page, pages, 0, MEDIA_PORT(us) }; - US_DEBUGP("alauda_read_block: pba %d page %d count %d\n", - pba, page, pages); + usb_stor_dbg(us, "pba %d page %d count %d\n", pba, page, pages); rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, command, 9, NULL); @@ -793,7 +789,7 @@ static int alauda_write_block(struct us_data *us, u16 pba, unsigned char *data) PBA_ZONE(pba), 0, PBA_LO(pba), 32, 0, MEDIA_PORT(us) }; - US_DEBUGP("alauda_write_block: pba %d\n", pba); + usb_stor_dbg(us, "pba %d\n", pba); rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, command, 9, NULL); @@ -866,14 +862,14 @@ static int alauda_write_lba(struct us_data *us, u16 lba, cptr = bptr + pagesize; nand_compute_ecc(bptr, ecc); if (!nand_compare_ecc(cptr+13, ecc)) { - US_DEBUGP("Warning: bad ecc in page %d- of pba %d\n", - i, pba); + usb_stor_dbg(us, "Warning: bad ecc in page %d- of pba %d\n", + i, pba); nand_store_ecc(cptr+13, ecc); } nand_compute_ecc(bptr + (pagesize / 2), ecc); if (!nand_compare_ecc(cptr+8, ecc)) { - US_DEBUGP("Warning: bad ecc in page %d+ of pba %d\n", - i, pba); + usb_stor_dbg(us, "Warning: bad ecc in page %d+ of pba %d\n", + i, pba); nand_store_ecc(cptr+8, ecc); } cptr[6] = cptr[11] = MSB_of(lbap); @@ -900,8 +896,7 @@ static int alauda_write_lba(struct us_data *us, u16 lba, new_pba_offset = new_pba - (zone * zonesize); MEDIA_INFO(us).pba_to_lba[zone][new_pba_offset] = lba; MEDIA_INFO(us).lba_to_pba[zone][lba_offset] = new_pba; - US_DEBUGP("alauda_write_lba: Remapped LBA %d to PBA %d\n", - lba, new_pba); + usb_stor_dbg(us, "Remapped LBA %d to PBA %d\n", lba, new_pba); if (pba != UNDEF) { unsigned int pba_offset = pba - (zone * zonesize); @@ -964,8 +959,8 @@ static int alauda_read_data(struct us_data *us, unsigned long address, /* Not overflowing capacity? */ if (lba >= max_lba) { - US_DEBUGP("Error: Requested lba %u exceeds " - "maximum %u\n", lba, max_lba); + usb_stor_dbg(us, "Error: Requested lba %u exceeds maximum %u\n", + lba, max_lba); result = USB_STOR_TRANSPORT_ERROR; break; } @@ -978,8 +973,8 @@ static int alauda_read_data(struct us_data *us, unsigned long address, pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset]; if (pba == UNDEF) { /* this lba was never written */ - US_DEBUGP("Read %d zero pages (LBA %d) page %d\n", - pages, lba, page); + usb_stor_dbg(us, "Read %d zero pages (LBA %d) page %d\n", + pages, lba, page); /* This is not really an error. It just means that the block has never been written. @@ -988,9 +983,8 @@ static int alauda_read_data(struct us_data *us, unsigned long address, memset(buffer, 0, len); } else { - US_DEBUGP("Read %d pages, from PBA %d" - " (LBA %d) page %d\n", - pages, pba, lba, page); + usb_stor_dbg(us, "Read %d pages, from PBA %d (LBA %d) page %d\n", + pages, pba, lba, page); result = alauda_read_block(us, pba, page, pages, buffer); if (result != USB_STOR_TRANSPORT_GOOD) @@ -1066,8 +1060,8 @@ static int alauda_write_data(struct us_data *us, unsigned long address, /* Not overflowing capacity? */ if (lba >= max_lba) { - US_DEBUGP("alauda_write_data: Requested lba %u exceeds " - "maximum %u\n", lba, max_lba); + usb_stor_dbg(us, "Requested lba %u exceeds maximum %u\n", + lba, max_lba); result = USB_STOR_TRANSPORT_ERROR; break; } @@ -1122,11 +1116,9 @@ static int init_alauda(struct us_data *us) nand_init_ecc(); us->extra = kzalloc(sizeof(struct alauda_info), GFP_NOIO); - if (!us->extra) { - US_DEBUGP("init_alauda: Gah! Can't allocate storage for" - "alauda info struct!\n"); + if (!us->extra) return USB_STOR_TRANSPORT_ERROR; - } + info = (struct alauda_info *) us->extra; us->extra_destructor = alauda_info_destructor; @@ -1147,15 +1139,14 @@ static int alauda_transport(struct scsi_cmnd *srb, struct us_data *us) }; if (srb->cmnd[0] == INQUIRY) { - US_DEBUGP("alauda_transport: INQUIRY. " - "Returning bogus response.\n"); + usb_stor_dbg(us, "INQUIRY - Returning bogus response\n"); memcpy(ptr, inquiry_response, sizeof(inquiry_response)); fill_inquiry_response(us, ptr, 36); return USB_STOR_TRANSPORT_GOOD; } if (srb->cmnd[0] == TEST_UNIT_READY) { - US_DEBUGP("alauda_transport: TEST_UNIT_READY.\n"); + usb_stor_dbg(us, "TEST_UNIT_READY\n"); return alauda_check_media(us); } @@ -1193,8 +1184,7 @@ static int alauda_transport(struct scsi_cmnd *srb, struct us_data *us) page |= short_pack(srb->cmnd[5], srb->cmnd[4]); pages = short_pack(srb->cmnd[8], srb->cmnd[7]); - US_DEBUGP("alauda_transport: READ_10: page %d pagect %d\n", - page, pages); + usb_stor_dbg(us, "READ_10: page %d pagect %d\n", page, pages); return alauda_read_data(us, page, pages); } @@ -1211,14 +1201,13 @@ static int alauda_transport(struct scsi_cmnd *srb, struct us_data *us) page |= short_pack(srb->cmnd[5], srb->cmnd[4]); pages = short_pack(srb->cmnd[8], srb->cmnd[7]); - US_DEBUGP("alauda_transport: WRITE_10: page %d pagect %d\n", - page, pages); + usb_stor_dbg(us, "WRITE_10: page %d pagect %d\n", page, pages); return alauda_write_data(us, page, pages); } if (srb->cmnd[0] == REQUEST_SENSE) { - US_DEBUGP("alauda_transport: REQUEST_SENSE.\n"); + usb_stor_dbg(us, "REQUEST_SENSE\n"); memset(ptr, 0, 18); ptr[0] = 0xF0; @@ -1237,8 +1226,8 @@ static int alauda_transport(struct scsi_cmnd *srb, struct us_data *us) return USB_STOR_TRANSPORT_GOOD; } - US_DEBUGP("alauda_transport: Gah! Unknown command: %d (0x%x)\n", - srb->cmnd[0], srb->cmnd[0]); + usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n", + srb->cmnd[0], srb->cmnd[0]); info->sense_key = 0x05; info->sense_asc = 0x20; info->sense_ascq = 0x00; diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c index 070b5c0ebbf9..8514a2d82b72 100644 --- a/drivers/usb/storage/cypress_atacb.c +++ b/drivers/usb/storage/cypress_atacb.c @@ -159,7 +159,7 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us) if (srb->result == SAM_STAT_CHECK_CONDITION && memcmp(srb->sense_buffer, usb_stor_sense_invalidCDB, sizeof(usb_stor_sense_invalidCDB)) == 0) { - US_DEBUGP("cypress atacb not supported ???\n"); + usb_stor_dbg(us, "cypress atacb not supported ???\n"); goto end; } @@ -248,14 +248,26 @@ static int cypress_probe(struct usb_interface *intf, { struct us_data *us; int result; + struct usb_device *device; result = usb_stor_probe1(&us, intf, id, (id - cypress_usb_ids) + cypress_unusual_dev_list); if (result) return result; - us->protocol_name = "Transparent SCSI with Cypress ATACB"; - us->proto_handler = cypress_atacb_passthrough; + /* Among CY7C68300 chips, the A revision does not support Cypress ATACB + * Filter out this revision from EEPROM default descriptor values + */ + device = interface_to_usbdev(intf); + if (device->descriptor.iManufacturer != 0x38 || + device->descriptor.iProduct != 0x4e || + device->descriptor.iSerialNumber != 0x64) { + us->protocol_name = "Transparent SCSI with Cypress ATACB"; + us->proto_handler = cypress_atacb_passthrough; + } else { + us->protocol_name = "Transparent SCSI"; + us->proto_handler = usb_stor_transparent_scsi_command; + } result = usb_stor_probe2(us); return result; diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c index 494fee5af41d..7b17c2169812 100644 --- a/drivers/usb/storage/datafab.c +++ b/drivers/usb/storage/datafab.c @@ -123,7 +123,7 @@ datafab_bulk_read(struct us_data *us, unsigned char *data, unsigned int len) { if (len == 0) return USB_STOR_XFER_GOOD; - US_DEBUGP("datafab_bulk_read: len = %d\n", len); + usb_stor_dbg(us, "len = %d\n", len); return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, data, len, NULL); } @@ -134,7 +134,7 @@ datafab_bulk_write(struct us_data *us, unsigned char *data, unsigned int len) { if (len == 0) return USB_STOR_XFER_GOOD; - US_DEBUGP("datafab_bulk_write: len = %d\n", len); + usb_stor_dbg(us, "len = %d\n", len); return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, data, len, NULL); } @@ -300,9 +300,8 @@ static int datafab_write_data(struct us_data *us, goto leave; if (reply[0] != 0x50 && reply[1] != 0) { - US_DEBUGP("datafab_write_data: Gah! " - "write return code: %02x %02x\n", - reply[0], reply[1]); + usb_stor_dbg(us, "Gah! write return code: %02x %02x\n", + reply[0], reply[1]); result = USB_STOR_TRANSPORT_ERROR; goto leave; } @@ -342,7 +341,7 @@ static int datafab_determine_lun(struct us_data *us, if (!buf) return USB_STOR_TRANSPORT_ERROR; - US_DEBUGP("datafab_determine_lun: locating...\n"); + usb_stor_dbg(us, "locating...\n"); // we'll try 3 times before giving up... // @@ -474,16 +473,16 @@ static int datafab_handle_mode_sense(struct us_data *us, switch (pc) { case 0x0: - US_DEBUGP("datafab_handle_mode_sense: Current values\n"); + usb_stor_dbg(us, "Current values\n"); break; case 0x1: - US_DEBUGP("datafab_handle_mode_sense: Changeable values\n"); + usb_stor_dbg(us, "Changeable values\n"); break; case 0x2: - US_DEBUGP("datafab_handle_mode_sense: Default values\n"); + usb_stor_dbg(us, "Default values\n"); break; case 0x3: - US_DEBUGP("datafab_handle_mode_sense: Saves values\n"); + usb_stor_dbg(us, "Saves values\n"); break; } @@ -566,11 +565,9 @@ static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) if (!us->extra) { us->extra = kzalloc(sizeof(struct datafab_info), GFP_NOIO); - if (!us->extra) { - US_DEBUGP("datafab_transport: Gah! " - "Can't allocate storage for Datafab info struct!\n"); + if (!us->extra) return USB_STOR_TRANSPORT_ERROR; - } + us->extra_destructor = datafab_info_destructor; ((struct datafab_info *)us->extra)->lun = -1; } @@ -578,7 +575,7 @@ static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) info = (struct datafab_info *) (us->extra); if (srb->cmnd[0] == INQUIRY) { - US_DEBUGP("datafab_transport: INQUIRY. Returning bogus response"); + usb_stor_dbg(us, "INQUIRY - Returning bogus response\n"); memcpy(ptr, inquiry_reply, sizeof(inquiry_reply)); fill_inquiry_response(us, ptr, 36); return USB_STOR_TRANSPORT_GOOD; @@ -590,8 +587,8 @@ static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) if (rc != USB_STOR_TRANSPORT_GOOD) return rc; - US_DEBUGP("datafab_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n", - info->sectors, info->ssize); + usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n", + info->sectors, info->ssize); // build the reply // we need the last sector, not the number of sectors @@ -603,7 +600,7 @@ static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) } if (srb->cmnd[0] == MODE_SELECT_10) { - US_DEBUGP("datafab_transport: Gah! MODE_SELECT_10.\n"); + usb_stor_dbg(us, "Gah! MODE_SELECT_10\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -615,7 +612,8 @@ static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); - US_DEBUGP("datafab_transport: READ_10: read block 0x%04lx count %ld\n", block, blocks); + usb_stor_dbg(us, "READ_10: read block 0x%04lx count %ld\n", + block, blocks); return datafab_read_data(us, info, block, blocks); } @@ -628,7 +626,8 @@ static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); - US_DEBUGP("datafab_transport: READ_12: read block 0x%04lx count %ld\n", block, blocks); + usb_stor_dbg(us, "READ_12: read block 0x%04lx count %ld\n", + block, blocks); return datafab_read_data(us, info, block, blocks); } @@ -638,7 +637,8 @@ static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); - US_DEBUGP("datafab_transport: WRITE_10: write block 0x%04lx count %ld\n", block, blocks); + usb_stor_dbg(us, "WRITE_10: write block 0x%04lx count %ld\n", + block, blocks); return datafab_write_data(us, info, block, blocks); } @@ -651,17 +651,18 @@ static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); - US_DEBUGP("datafab_transport: WRITE_12: write block 0x%04lx count %ld\n", block, blocks); + usb_stor_dbg(us, "WRITE_12: write block 0x%04lx count %ld\n", + block, blocks); return datafab_write_data(us, info, block, blocks); } if (srb->cmnd[0] == TEST_UNIT_READY) { - US_DEBUGP("datafab_transport: TEST_UNIT_READY.\n"); + usb_stor_dbg(us, "TEST_UNIT_READY\n"); return datafab_id_device(us, info); } if (srb->cmnd[0] == REQUEST_SENSE) { - US_DEBUGP("datafab_transport: REQUEST_SENSE. Returning faked response\n"); + usb_stor_dbg(us, "REQUEST_SENSE - Returning faked response\n"); // this response is pretty bogus right now. eventually if necessary // we can set the correct sense data. so far though it hasn't been @@ -679,12 +680,12 @@ static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) } if (srb->cmnd[0] == MODE_SENSE) { - US_DEBUGP("datafab_transport: MODE_SENSE_6 detected\n"); + usb_stor_dbg(us, "MODE_SENSE_6 detected\n"); return datafab_handle_mode_sense(us, srb, 1); } if (srb->cmnd[0] == MODE_SENSE_10) { - US_DEBUGP("datafab_transport: MODE_SENSE_10 detected\n"); + usb_stor_dbg(us, "MODE_SENSE_10 detected\n"); return datafab_handle_mode_sense(us, srb, 0); } @@ -698,7 +699,7 @@ static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) if (srb->cmnd[0] == START_STOP) { /* this is used by sd.c'check_scsidisk_media_change to detect media change */ - US_DEBUGP("datafab_transport: START_STOP.\n"); + usb_stor_dbg(us, "START_STOP\n"); /* the first datafab_id_device after a media change returns an error (determined experimentally) */ rc = datafab_id_device(us, info); @@ -712,8 +713,8 @@ static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) return rc; } - US_DEBUGP("datafab_transport: Gah! Unknown command: %d (0x%x)\n", - srb->cmnd[0], srb->cmnd[0]); + usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n", + srb->cmnd[0], srb->cmnd[0]); info->sense_key = 0x05; info->sense_asc = 0x20; info->sense_ascq = 0x00; diff --git a/drivers/usb/storage/debug.c b/drivers/usb/storage/debug.c index a2b5526c9fa0..e08f64780e30 100644 --- a/drivers/usb/storage/debug.c +++ b/drivers/usb/storage/debug.c @@ -42,16 +42,19 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/device.h> #include <linux/cdrom.h> +#include <linux/export.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> #include <scsi/scsi_dbg.h> +#include "usb.h" #include "debug.h" #include "scsi.h" -void usb_stor_show_command(struct scsi_cmnd *srb) +void usb_stor_show_command(const struct us_data *us, struct scsi_cmnd *srb) { char *what = NULL; int i; @@ -149,18 +152,18 @@ void usb_stor_show_command(struct scsi_cmnd *srb) case WRITE_LONG_2: what = "WRITE_LONG_2"; break; default: what = "(unknown command)"; break; } - US_DEBUGP("Command %s (%d bytes)\n", what, srb->cmd_len); - US_DEBUGP(""); + usb_stor_dbg(us, "Command %s (%d bytes)\n", what, srb->cmd_len); + usb_stor_dbg(us, "bytes: "); for (i = 0; i < srb->cmd_len && i < 16; i++) US_DEBUGPX(" %02x", srb->cmnd[i]); US_DEBUGPX("\n"); } -void usb_stor_show_sense( - unsigned char key, - unsigned char asc, - unsigned char ascq) { - +void usb_stor_show_sense(const struct us_data *us, + unsigned char key, + unsigned char asc, + unsigned char ascq) +{ const char *what, *keystr; keystr = scsi_sense_key_string(key); @@ -171,7 +174,22 @@ void usb_stor_show_sense( if (what == NULL) what = "(unknown ASC/ASCQ)"; - US_DEBUGP("%s: ", keystr); + usb_stor_dbg(us, "%s: ", keystr); US_DEBUGPX(what, ascq); US_DEBUGPX("\n"); } + +int usb_stor_dbg(const struct us_data *us, const char *fmt, ...) +{ + va_list args; + int r; + + va_start(args, fmt); + + r = dev_vprintk_emit(7, &us->pusb_dev->dev, fmt, args); + + va_end(args); + + return r; +} +EXPORT_SYMBOL_GPL(usb_stor_dbg); diff --git a/drivers/usb/storage/debug.h b/drivers/usb/storage/debug.h index dbb985d52423..b1273f03e223 100644 --- a/drivers/usb/storage/debug.h +++ b/drivers/usb/storage/debug.h @@ -47,15 +47,22 @@ #define USB_STORAGE "usb-storage: " #ifdef CONFIG_USB_STORAGE_DEBUG -void usb_stor_show_command(struct scsi_cmnd *srb); -void usb_stor_show_sense( unsigned char key, - unsigned char asc, unsigned char ascq ); -#define US_DEBUGP(x...) printk( KERN_DEBUG USB_STORAGE x ) -#define US_DEBUGPX(x...) printk( x ) -#define US_DEBUG(x) x +void usb_stor_show_command(const struct us_data *us, struct scsi_cmnd *srb); +void usb_stor_show_sense(const struct us_data *us, unsigned char key, + unsigned char asc, unsigned char ascq); +__printf(2, 3) int usb_stor_dbg(const struct us_data *us, + const char *fmt, ...); + +#define US_DEBUGPX(fmt, ...) printk(fmt, ##__VA_ARGS__) +#define US_DEBUG(x) x #else -#define US_DEBUGP(x...) -#define US_DEBUGPX(x...) +__printf(2, 3) +static inline int _usb_stor_dbg(const struct us_data *us, + const char *fmt, ...) {return 1;} +#define usb_stor_dbg(us, fmt, ...) \ + do { if (0) _usb_stor_dbg(us, fmt, ##__VA_ARGS__); } while (0) +#define US_DEBUGPX(fmt, ...) \ + do { if (0) printk(fmt, ##__VA_ARGS__); } while (0) #define US_DEBUG(x) #endif diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c index 118b134a1dad..1bfc9a6cab5f 100644 --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -504,12 +504,12 @@ static int ene_send_scsi_cmd(struct us_data *us, u8 fDir, void *buf, int use_sg) unsigned int cswlen = 0, partial = 0; unsigned int transfer_length = bcb->DataTransferLength; - /* US_DEBUGP("transport --- ene_send_scsi_cmd\n"); */ + /* usb_stor_dbg(us, "transport --- ene_send_scsi_cmd\n"); */ /* send cmd to out endpoint */ result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcb, US_BULK_CB_WRAP_LEN, NULL); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("send cmd to out endpoint fail ---\n"); + usb_stor_dbg(us, "send cmd to out endpoint fail ---\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -529,7 +529,7 @@ static int ene_send_scsi_cmd(struct us_data *us, u8 fDir, void *buf, int use_sg) transfer_length, 0, &partial); } if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("data transfer fail ---\n"); + usb_stor_dbg(us, "data transfer fail ---\n"); return USB_STOR_TRANSPORT_ERROR; } } @@ -539,14 +539,14 @@ static int ene_send_scsi_cmd(struct us_data *us, u8 fDir, void *buf, int use_sg) US_BULK_CS_WRAP_LEN, &cswlen); if (result == USB_STOR_XFER_SHORT && cswlen == 0) { - US_DEBUGP("Received 0-length CSW; retrying...\n"); + usb_stor_dbg(us, "Received 0-length CSW; retrying...\n"); result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs, US_BULK_CS_WRAP_LEN, &cswlen); } if (result == USB_STOR_XFER_STALLED) { /* get the status again */ - US_DEBUGP("Attempting to get CSW (2nd try)...\n"); + usb_stor_dbg(us, "Attempting to get CSW (2nd try)...\n"); result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs, US_BULK_CS_WRAP_LEN, NULL); } @@ -626,7 +626,7 @@ static int sd_scsi_read_capacity(struct us_data *us, struct scsi_cmnd *srb) struct scatterlist *sg = NULL; struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; - US_DEBUGP("sd_scsi_read_capacity\n"); + usb_stor_dbg(us, "sd_scsi_read_capacity\n"); if (info->SD_Status.HiCapacity) { bl_len = 0x200; if (info->SD_Status.IsMMC) @@ -639,8 +639,8 @@ static int sd_scsi_read_capacity(struct us_data *us, struct scsi_cmnd *srb) * (1 << (info->SD_C_SIZE_MULT + 2)) - 1; } info->bl_num = bl_num; - US_DEBUGP("bl_len = %x\n", bl_len); - US_DEBUGP("bl_num = %x\n", bl_num); + usb_stor_dbg(us, "bl_len = %x\n", bl_len); + usb_stor_dbg(us, "bl_num = %x\n", bl_num); /*srb->request_bufflen = 8; */ buf[0] = (bl_num >> 24) & 0xff; @@ -675,7 +675,7 @@ static int sd_scsi_read(struct us_data *us, struct scsi_cmnd *srb) result = ene_load_bincode(us, SD_RW_PATTERN); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Load SD RW pattern Fail !!\n"); + usb_stor_dbg(us, "Load SD RW pattern Fail !!\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -715,7 +715,7 @@ static int sd_scsi_write(struct us_data *us, struct scsi_cmnd *srb) result = ene_load_bincode(us, SD_RW_PATTERN); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Load SD RW pattern Fail !!\n"); + usb_stor_dbg(us, "Load SD RW pattern Fail !!\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -1493,7 +1493,7 @@ static int ms_scsi_read_capacity(struct us_data *us, struct scsi_cmnd *srb) struct scatterlist *sg = NULL; struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; - US_DEBUGP("ms_scsi_read_capacity\n"); + usb_stor_dbg(us, "ms_scsi_read_capacity\n"); bl_len = 0x200; if (info->MS_Status.IsMSPro) bl_num = info->MSP_TotalBlock - 1; @@ -1501,8 +1501,8 @@ static int ms_scsi_read_capacity(struct us_data *us, struct scsi_cmnd *srb) bl_num = info->MS_Lib.NumberOfLogBlock * info->MS_Lib.blockSize * 2 - 1; info->bl_num = bl_num; - US_DEBUGP("bl_len = %x\n", bl_len); - US_DEBUGP("bl_num = %x\n", bl_num); + usb_stor_dbg(us, "bl_len = %x\n", bl_len); + usb_stor_dbg(us, "bl_num = %x\n", bl_num); /*srb->request_bufflen = 8; */ buf[0] = (bl_num >> 24) & 0xff; @@ -1654,7 +1654,7 @@ static int ms_scsi_read(struct us_data *us, struct scsi_cmnd *srb) if (info->MS_Status.IsMSPro) { result = ene_load_bincode(us, MSP_RW_PATTERN); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Load MPS RW pattern Fail !!\n"); + usb_stor_dbg(us, "Load MPS RW pattern Fail !!\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -1854,7 +1854,7 @@ static int ene_get_card_status(struct us_data *us, u8 *buf) u32 reg4b; struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; - /*US_DEBUGP("transport --- ENE_ReadSDReg\n");*/ + /*usb_stor_dbg(us, "transport --- ENE_ReadSDReg\n");*/ reg4b = *(u32 *)&buf[0x18]; info->SD_READ_BL_LEN = (u8)((reg4b >> 8) & 0x0f); @@ -1894,45 +1894,44 @@ static int ene_load_bincode(struct us_data *us, unsigned char flag) switch (flag) { /* For SD */ case SD_INIT1_PATTERN: - US_DEBUGP("SD_INIT1_PATTERN\n"); + usb_stor_dbg(us, "SD_INIT1_PATTERN\n"); fw_name = SD_INIT1_FIRMWARE; break; case SD_INIT2_PATTERN: - US_DEBUGP("SD_INIT2_PATTERN\n"); + usb_stor_dbg(us, "SD_INIT2_PATTERN\n"); fw_name = SD_INIT2_FIRMWARE; break; case SD_RW_PATTERN: - US_DEBUGP("SD_RW_PATTERN\n"); + usb_stor_dbg(us, "SD_RW_PATTERN\n"); fw_name = SD_RW_FIRMWARE; break; /* For MS */ case MS_INIT_PATTERN: - US_DEBUGP("MS_INIT_PATTERN\n"); + usb_stor_dbg(us, "MS_INIT_PATTERN\n"); fw_name = MS_INIT_FIRMWARE; break; case MSP_RW_PATTERN: - US_DEBUGP("MSP_RW_PATTERN\n"); + usb_stor_dbg(us, "MSP_RW_PATTERN\n"); fw_name = MSP_RW_FIRMWARE; break; case MS_RW_PATTERN: - US_DEBUGP("MS_RW_PATTERN\n"); + usb_stor_dbg(us, "MS_RW_PATTERN\n"); fw_name = MS_RW_FIRMWARE; break; default: - US_DEBUGP("----------- Unknown PATTERN ----------\n"); + usb_stor_dbg(us, "----------- Unknown PATTERN ----------\n"); goto nofw; } err = request_firmware(&sd_fw, fw_name, &us->pusb_dev->dev); if (err) { - US_DEBUGP("load firmware %s failed\n", fw_name); + usb_stor_dbg(us, "load firmware %s failed\n", fw_name); goto nofw; } buf = kmalloc(sd_fw->size, GFP_KERNEL); - if (buf == NULL) { - US_DEBUGP("Malloc memory for fireware failed!\n"); + if (buf == NULL) goto nofw; - } + memcpy(buf, sd_fw->data, sd_fw->size); memset(bcb, 0, sizeof(struct bulk_cb_wrap)); bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); @@ -2116,9 +2115,9 @@ static int ene_ms_init(struct us_data *us) } else { ms_card_init(us); /* Card is MS (to ms.c)*/ } - US_DEBUGP("MS Init Code OK !!\n"); + usb_stor_dbg(us, "MS Init Code OK !!\n"); } else { - US_DEBUGP("MS Card Not Ready --- %x\n", buf[0]); + usb_stor_dbg(us, "MS Card Not Ready --- %x\n", buf[0]); return USB_STOR_TRANSPORT_ERROR; } @@ -2132,11 +2131,11 @@ static int ene_sd_init(struct us_data *us) struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; - US_DEBUGP("transport --- ENE_SDInit\n"); + usb_stor_dbg(us, "transport --- ENE_SDInit\n"); /* SD Init Part-1 */ result = ene_load_bincode(us, SD_INIT1_PATTERN); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Load SD Init Code Part-1 Fail !!\n"); + usb_stor_dbg(us, "Load SD Init Code Part-1 Fail !!\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -2147,14 +2146,14 @@ static int ene_sd_init(struct us_data *us) result = ene_send_scsi_cmd(us, FDIR_READ, NULL, 0); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Execution SD Init Code Fail !!\n"); + usb_stor_dbg(us, "Execution SD Init Code Fail !!\n"); return USB_STOR_TRANSPORT_ERROR; } /* SD Init Part-2 */ result = ene_load_bincode(us, SD_INIT2_PATTERN); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Load SD Init Code Part-2 Fail !!\n"); + usb_stor_dbg(us, "Load SD Init Code Part-2 Fail !!\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -2166,21 +2165,23 @@ static int ene_sd_init(struct us_data *us) result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Execution SD Init Code Fail !!\n"); + usb_stor_dbg(us, "Execution SD Init Code Fail !!\n"); return USB_STOR_TRANSPORT_ERROR; } info->SD_Status = *(struct SD_STATUS *)&buf[0]; if (info->SD_Status.Insert && info->SD_Status.Ready) { + struct SD_STATUS *s = &info->SD_Status; + ene_get_card_status(us, (unsigned char *)&buf); - US_DEBUGP("Insert = %x\n", info->SD_Status.Insert); - US_DEBUGP("Ready = %x\n", info->SD_Status.Ready); - US_DEBUGP("IsMMC = %x\n", info->SD_Status.IsMMC); - US_DEBUGP("HiCapacity = %x\n", info->SD_Status.HiCapacity); - US_DEBUGP("HiSpeed = %x\n", info->SD_Status.HiSpeed); - US_DEBUGP("WtP = %x\n", info->SD_Status.WtP); + usb_stor_dbg(us, "Insert = %x\n", s->Insert); + usb_stor_dbg(us, "Ready = %x\n", s->Ready); + usb_stor_dbg(us, "IsMMC = %x\n", s->IsMMC); + usb_stor_dbg(us, "HiCapacity = %x\n", s->HiCapacity); + usb_stor_dbg(us, "HiSpeed = %x\n", s->HiSpeed); + usb_stor_dbg(us, "WtP = %x\n", s->WtP); } else { - US_DEBUGP("SD Card Not Ready --- %x\n", buf[0]); + usb_stor_dbg(us, "SD Card Not Ready --- %x\n", buf[0]); return USB_STOR_TRANSPORT_ERROR; } return USB_STOR_TRANSPORT_GOOD; @@ -2293,7 +2294,7 @@ static int ene_transport(struct scsi_cmnd *srb, struct us_data *us) int result = 0; struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra); - /*US_DEBUG(usb_stor_show_command(srb)); */ + /*US_DEBUG(usb_stor_show_command(us, srb)); */ scsi_set_resid(srb, 0); if (unlikely(!(info->SD_Status.Ready || info->MS_Status.Ready))) { result = ene_init(us); @@ -2362,7 +2363,6 @@ static int ene_ub6250_resume(struct usb_interface *iface) mutex_lock(&us->dev_mutex); - US_DEBUGP("%s\n", __func__); if (us->suspend_resume_hook) (us->suspend_resume_hook)(us, US_RESUME); @@ -2382,7 +2382,7 @@ static int ene_ub6250_reset_resume(struct usb_interface *iface) u8 tmp = 0; struct us_data *us = usb_get_intfdata(iface); struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra); - US_DEBUGP("%s\n", __func__); + /* Report the reset to the SCSI core */ usb_stor_reset_resume(iface); diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c index e6df087dca9d..ef16068b7087 100644 --- a/drivers/usb/storage/freecom.c +++ b/drivers/usb/storage/freecom.c @@ -40,7 +40,7 @@ MODULE_AUTHOR("David Brown <usb-storage@davidb.org>"); MODULE_LICENSE("GPL"); #ifdef CONFIG_USB_STORAGE_DEBUG -static void pdump (void *, int); +static void pdump(struct us_data *us, void *ibuffer, int length); #endif /* Bits of HD_STATUS */ @@ -161,20 +161,20 @@ freecom_readdata (struct scsi_cmnd *srb, struct us_data *us, fxfr->Count = cpu_to_le32 (count); memset (fxfr->Pad, 0, sizeof (fxfr->Pad)); - US_DEBUGP("Read data Freecom! (c=%d)\n", count); + usb_stor_dbg(us, "Read data Freecom! (c=%d)\n", count); /* Issue the transfer command. */ result = usb_stor_bulk_transfer_buf (us, opipe, fxfr, FCM_PACKET_LENGTH, NULL); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP ("Freecom readdata transport error\n"); + usb_stor_dbg(us, "Freecom readdata transport error\n"); return USB_STOR_TRANSPORT_ERROR; } /* Now transfer all of our blocks. */ - US_DEBUGP("Start of read\n"); + usb_stor_dbg(us, "Start of read\n"); result = usb_stor_bulk_srb(us, ipipe, srb); - US_DEBUGP("freecom_readdata done!\n"); + usb_stor_dbg(us, "freecom_readdata done!\n"); if (result > USB_STOR_XFER_SHORT) return USB_STOR_TRANSPORT_ERROR; @@ -194,21 +194,21 @@ freecom_writedata (struct scsi_cmnd *srb, struct us_data *us, fxfr->Count = cpu_to_le32 (count); memset (fxfr->Pad, 0, sizeof (fxfr->Pad)); - US_DEBUGP("Write data Freecom! (c=%d)\n", count); + usb_stor_dbg(us, "Write data Freecom! (c=%d)\n", count); /* Issue the transfer command. */ result = usb_stor_bulk_transfer_buf (us, opipe, fxfr, FCM_PACKET_LENGTH, NULL); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP ("Freecom writedata transport error\n"); + usb_stor_dbg(us, "Freecom writedata transport error\n"); return USB_STOR_TRANSPORT_ERROR; } /* Now transfer all of our blocks. */ - US_DEBUGP("Start of write\n"); + usb_stor_dbg(us, "Start of write\n"); result = usb_stor_bulk_srb(us, opipe, srb); - US_DEBUGP("freecom_writedata done!\n"); + usb_stor_dbg(us, "freecom_writedata done!\n"); if (result > USB_STOR_XFER_SHORT) return USB_STOR_TRANSPORT_ERROR; return USB_STOR_TRANSPORT_GOOD; @@ -230,7 +230,7 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) fcb = (struct freecom_cb_wrap *) us->iobuf; fst = (struct freecom_status *) us->iobuf; - US_DEBUGP("Freecom TRANSPORT STARTED\n"); + usb_stor_dbg(us, "Freecom TRANSPORT STARTED\n"); /* Get handles for both transports. */ opipe = us->send_bulk_pipe; @@ -242,7 +242,7 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) memcpy (fcb->Atapi, srb->cmnd, 12); memset (fcb->Filler, 0, sizeof (fcb->Filler)); - US_DEBUG(pdump (srb->cmnd, 12)); + US_DEBUG(pdump(us, srb->cmnd, 12)); /* Send it out. */ result = usb_stor_bulk_transfer_buf (us, opipe, fcb, @@ -252,7 +252,7 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) * USB land. It returns the status in its own registers, which * come back in the bulk pipe. */ if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP ("freecom transport error\n"); + usb_stor_dbg(us, "freecom transport error\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -260,11 +260,11 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) * doesn't hurt us to always do it now. */ result = usb_stor_bulk_transfer_buf (us, ipipe, fst, FCM_STATUS_PACKET_LENGTH, &partial); - US_DEBUGP("foo Status result %d %u\n", result, partial); + usb_stor_dbg(us, "foo Status result %d %u\n", result, partial); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - US_DEBUG(pdump ((void *) fst, partial)); + US_DEBUG(pdump(us, (void *)fst, partial)); /* The firmware will time-out commands after 20 seconds. Some commands * can legitimately take longer than this, so we use a different @@ -275,8 +275,8 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) * may not work, but that is a condition that should never happen. */ while (fst->Status & FCM_STATUS_BUSY) { - US_DEBUGP("20 second USB/ATAPI bridge TIMEOUT occurred!\n"); - US_DEBUGP("fst->Status is %x\n", fst->Status); + usb_stor_dbg(us, "20 second USB/ATAPI bridge TIMEOUT occurred!\n"); + usb_stor_dbg(us, "fst->Status is %x\n", fst->Status); /* Get the status again */ fcb->Type = FCM_PACKET_STATUS; @@ -293,7 +293,7 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) * registers, which come back in the bulk pipe. */ if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP ("freecom transport error\n"); + usb_stor_dbg(us, "freecom transport error\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -301,26 +301,26 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) result = usb_stor_bulk_transfer_buf (us, ipipe, fst, FCM_STATUS_PACKET_LENGTH, &partial); - US_DEBUGP("bar Status result %d %u\n", result, partial); + usb_stor_dbg(us, "bar Status result %d %u\n", result, partial); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - US_DEBUG(pdump ((void *) fst, partial)); + US_DEBUG(pdump(us, (void *)fst, partial)); } if (partial != 4) return USB_STOR_TRANSPORT_ERROR; if ((fst->Status & 1) != 0) { - US_DEBUGP("operation failed\n"); + usb_stor_dbg(us, "operation failed\n"); return USB_STOR_TRANSPORT_FAILED; } /* The device might not have as much data available as we * requested. If you ask for more than the device has, this reads * and such will hang. */ - US_DEBUGP("Device indicates that it has %d bytes available\n", - le16_to_cpu (fst->Count)); - US_DEBUGP("SCSI requested %d\n", scsi_bufflen(srb)); + usb_stor_dbg(us, "Device indicates that it has %d bytes available\n", + le16_to_cpu(fst->Count)); + usb_stor_dbg(us, "SCSI requested %d\n", scsi_bufflen(srb)); /* Find the length we desire to read. */ switch (srb->cmnd[0]) { @@ -337,7 +337,8 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) /* verify that this amount is legal */ if (length > scsi_bufflen(srb)) { length = scsi_bufflen(srb); - US_DEBUGP("Truncating request to match buffer length: %d\n", length); + usb_stor_dbg(us, "Truncating request to match buffer length: %d\n", + length); } /* What we do now depends on what direction the data is supposed to @@ -351,29 +352,29 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) /* Make sure that the status indicates that the device * wants data as well. */ if ((fst->Status & DRQ_STAT) == 0 || (fst->Reason & 3) != 2) { - US_DEBUGP("SCSI wants data, drive doesn't have any\n"); + usb_stor_dbg(us, "SCSI wants data, drive doesn't have any\n"); return USB_STOR_TRANSPORT_FAILED; } result = freecom_readdata (srb, us, ipipe, opipe, length); if (result != USB_STOR_TRANSPORT_GOOD) return result; - US_DEBUGP("FCM: Waiting for status\n"); + usb_stor_dbg(us, "Waiting for status\n"); result = usb_stor_bulk_transfer_buf (us, ipipe, fst, FCM_PACKET_LENGTH, &partial); - US_DEBUG(pdump ((void *) fst, partial)); + US_DEBUG(pdump(us, (void *)fst, partial)); if (partial != 4 || result > USB_STOR_XFER_SHORT) return USB_STOR_TRANSPORT_ERROR; if ((fst->Status & ERR_STAT) != 0) { - US_DEBUGP("operation failed\n"); + usb_stor_dbg(us, "operation failed\n"); return USB_STOR_TRANSPORT_FAILED; } if ((fst->Reason & 3) != 3) { - US_DEBUGP("Drive seems still hungry\n"); + usb_stor_dbg(us, "Drive seems still hungry\n"); return USB_STOR_TRANSPORT_FAILED; } - US_DEBUGP("Transfer happy\n"); + usb_stor_dbg(us, "Transfer happy\n"); break; case DMA_TO_DEVICE: @@ -387,22 +388,22 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) if (result != USB_STOR_TRANSPORT_GOOD) return result; - US_DEBUGP("FCM: Waiting for status\n"); + usb_stor_dbg(us, "Waiting for status\n"); result = usb_stor_bulk_transfer_buf (us, ipipe, fst, FCM_PACKET_LENGTH, &partial); if (partial != 4 || result > USB_STOR_XFER_SHORT) return USB_STOR_TRANSPORT_ERROR; if ((fst->Status & ERR_STAT) != 0) { - US_DEBUGP("operation failed\n"); + usb_stor_dbg(us, "operation failed\n"); return USB_STOR_TRANSPORT_FAILED; } if ((fst->Reason & 3) != 3) { - US_DEBUGP("Drive seems still hungry\n"); + usb_stor_dbg(us, "Drive seems still hungry\n"); return USB_STOR_TRANSPORT_FAILED; } - US_DEBUGP("Transfer happy\n"); + usb_stor_dbg(us, "Transfer happy\n"); break; @@ -412,8 +413,8 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) default: /* should never hit here -- filtered in usb.c */ - US_DEBUGP ("freecom unimplemented direction: %d\n", - us->srb->sc_data_direction); + usb_stor_dbg(us, "freecom unimplemented direction: %d\n", + us->srb->sc_data_direction); /* Return fail, SCSI seems to handle this better. */ return USB_STOR_TRANSPORT_FAILED; break; @@ -434,7 +435,7 @@ static int init_freecom(struct us_data *us) result = usb_stor_control_msg(us, us->recv_ctrl_pipe, 0x4c, 0xc0, 0x4346, 0x0, buffer, 0x20, 3*HZ); buffer[32] = '\0'; - US_DEBUGP("String returned from FC init is: %s\n", buffer); + usb_stor_dbg(us, "String returned from FC init is: %s\n", buffer); /* Special thanks to the people at Freecom for providing me with * this "magic sequence", which they use in their Windows and MacOS @@ -445,7 +446,7 @@ static int init_freecom(struct us_data *us) /* send reset */ result = usb_stor_control_msg(us, us->send_ctrl_pipe, 0x4d, 0x40, 0x24d8, 0x0, NULL, 0x0, 3*HZ); - US_DEBUGP("result from activate reset is %d\n", result); + usb_stor_dbg(us, "result from activate reset is %d\n", result); /* wait 250ms */ mdelay(250); @@ -453,7 +454,7 @@ static int init_freecom(struct us_data *us) /* clear reset */ result = usb_stor_control_msg(us, us->send_ctrl_pipe, 0x4d, 0x40, 0x24f8, 0x0, NULL, 0x0, 3*HZ); - US_DEBUGP("result from clear reset is %d\n", result); + usb_stor_dbg(us, "result from clear reset is %d\n", result); /* wait 3 seconds */ mdelay(3 * 1000); @@ -470,7 +471,7 @@ static int usb_stor_freecom_reset(struct us_data *us) } #ifdef CONFIG_USB_STORAGE_DEBUG -static void pdump (void *ibuffer, int length) +static void pdump(struct us_data *us, void *ibuffer, int length) { static char line[80]; int offset = 0; @@ -490,7 +491,7 @@ static void pdump (void *ibuffer, int length) line[offset++] = '.'; } line[offset] = 0; - US_DEBUGP("%s\n", line); + usb_stor_dbg(us, "%s\n", line); offset = 0; } offset += sprintf (line+offset, "%08x:", i); @@ -517,7 +518,7 @@ static void pdump (void *ibuffer, int length) line[offset++] = '.'; } line[offset] = 0; - US_DEBUGP("%s\n", line); + usb_stor_dbg(us, "%s\n", line); offset = 0; } #endif diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c index 105d900150c1..5a8b5ff1e45b 100644 --- a/drivers/usb/storage/initializers.c +++ b/drivers/usb/storage/initializers.c @@ -48,12 +48,12 @@ int usb_stor_euscsi_init(struct us_data *us) { int result; - US_DEBUGP("Attempting to init eUSCSI bridge...\n"); + usb_stor_dbg(us, "Attempting to init eUSCSI bridge...\n"); us->iobuf[0] = 0x1; result = usb_stor_control_msg(us, us->send_ctrl_pipe, 0x0C, USB_RECIP_INTERFACE | USB_TYPE_VENDOR, 0x01, 0x0, us->iobuf, 0x1, 5000); - US_DEBUGP("-- result is %d\n", result); + usb_stor_dbg(us, "-- result is %d\n", result); return 0; } @@ -68,7 +68,7 @@ int usb_stor_ucr61s2b_init(struct us_data *us) unsigned int partial; static char init_string[] = "\xec\x0a\x06\x00$PCCHIPS"; - US_DEBUGP("Sending UCR-61S2B initialization packet...\n"); + usb_stor_dbg(us, "Sending UCR-61S2B initialization packet...\n"); bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); bcb->Tag = 0; @@ -83,7 +83,7 @@ int usb_stor_ucr61s2b_init(struct us_data *us) if (res) return -EIO; - US_DEBUGP("Getting status packet...\n"); + usb_stor_dbg(us, "Getting status packet...\n"); res = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs, US_BULK_CS_WRAP_LEN, &partial); if (res) @@ -101,6 +101,6 @@ int usb_stor_huawei_e220_init(struct us_data *us) USB_REQ_SET_FEATURE, USB_TYPE_STANDARD | USB_RECIP_DEVICE, 0x01, 0x0, NULL, 0x0, 1000); - US_DEBUGP("Huawei mode set result is %d\n", result); + usb_stor_dbg(us, "Huawei mode set result is %d\n", result); return 0; } diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c index ecea47877364..599d8bff26c3 100644 --- a/drivers/usb/storage/isd200.c +++ b/drivers/usb/storage/isd200.c @@ -503,7 +503,7 @@ static int isd200_action( struct us_data *us, int action, switch ( action ) { case ACTION_READ_STATUS: - US_DEBUGP(" isd200_action(READ_STATUS)\n"); + usb_stor_dbg(us, " isd200_action(READ_STATUS)\n"); ata.generic.ActionSelect = ACTION_SELECT_0|ACTION_SELECT_2; ata.generic.RegisterSelect = REG_CYLINDER_LOW | REG_CYLINDER_HIGH | @@ -512,7 +512,7 @@ static int isd200_action( struct us_data *us, int action, break; case ACTION_ENUM: - US_DEBUGP(" isd200_action(ENUM,0x%02x)\n",value); + usb_stor_dbg(us, " isd200_action(ENUM,0x%02x)\n", value); ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2| ACTION_SELECT_3|ACTION_SELECT_4| ACTION_SELECT_5; @@ -522,7 +522,7 @@ static int isd200_action( struct us_data *us, int action, break; case ACTION_RESET: - US_DEBUGP(" isd200_action(RESET)\n"); + usb_stor_dbg(us, " isd200_action(RESET)\n"); ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2| ACTION_SELECT_3|ACTION_SELECT_4; ata.generic.RegisterSelect = REG_DEVICE_CONTROL; @@ -531,7 +531,7 @@ static int isd200_action( struct us_data *us, int action, break; case ACTION_REENABLE: - US_DEBUGP(" isd200_action(REENABLE)\n"); + usb_stor_dbg(us, " isd200_action(REENABLE)\n"); ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2| ACTION_SELECT_3|ACTION_SELECT_4; ata.generic.RegisterSelect = REG_DEVICE_CONTROL; @@ -540,7 +540,7 @@ static int isd200_action( struct us_data *us, int action, break; case ACTION_SOFT_RESET: - US_DEBUGP(" isd200_action(SOFT_RESET)\n"); + usb_stor_dbg(us, " isd200_action(SOFT_RESET)\n"); ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_5; ata.generic.RegisterSelect = REG_DEVICE_HEAD | REG_COMMAND; ata.write.DeviceHeadByte = info->DeviceHead; @@ -549,7 +549,7 @@ static int isd200_action( struct us_data *us, int action, break; case ACTION_IDENTIFY: - US_DEBUGP(" isd200_action(IDENTIFY)\n"); + usb_stor_dbg(us, " isd200_action(IDENTIFY)\n"); ata.generic.RegisterSelect = REG_COMMAND; ata.write.CommandByte = ATA_CMD_ID_ATA; isd200_set_srb(info, DMA_FROM_DEVICE, info->id, @@ -557,7 +557,7 @@ static int isd200_action( struct us_data *us, int action, break; default: - US_DEBUGP("Error: Undefined action %d\n",action); + usb_stor_dbg(us, "Error: Undefined action %d\n", action); return ISD200_ERROR; } @@ -567,7 +567,8 @@ static int isd200_action( struct us_data *us, int action, if (status == USB_STOR_TRANSPORT_GOOD) status = ISD200_GOOD; else { - US_DEBUGP(" isd200_action(0x%02x) error: %d\n",action,status); + usb_stor_dbg(us, " isd200_action(0x%02x) error: %d\n", + action, status); status = ISD200_ERROR; /* need to reset device here */ } @@ -589,17 +590,17 @@ static int isd200_read_regs( struct us_data *us ) int retStatus = ISD200_GOOD; int transferStatus; - US_DEBUGP("Entering isd200_IssueATAReadRegs\n"); + usb_stor_dbg(us, "Entering isd200_IssueATAReadRegs\n"); transferStatus = isd200_action( us, ACTION_READ_STATUS, info->RegsBuf, sizeof(info->ATARegs) ); if (transferStatus != ISD200_TRANSPORT_GOOD) { - US_DEBUGP(" Error reading ATA registers\n"); + usb_stor_dbg(us, " Error reading ATA registers\n"); retStatus = ISD200_ERROR; } else { memcpy(info->ATARegs, info->RegsBuf, sizeof(info->ATARegs)); - US_DEBUGP(" Got ATA Register[ATA_REG_ERROR_OFFSET] = 0x%x\n", - info->ATARegs[ATA_REG_ERROR_OFFSET]); + usb_stor_dbg(us, " Got ATA Register[ATA_REG_ERROR_OFFSET] = 0x%x\n", + info->ATARegs[ATA_REG_ERROR_OFFSET]); } return retStatus; @@ -629,7 +630,7 @@ static void isd200_invoke_transport( struct us_data *us, * short-circuit all other processing */ if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { - US_DEBUGP("-- command was aborted\n"); + usb_stor_dbg(us, "-- command was aborted\n"); goto Handle_Abort; } @@ -641,23 +642,23 @@ static void isd200_invoke_transport( struct us_data *us, break; case USB_STOR_TRANSPORT_NO_SENSE: - US_DEBUGP("-- transport indicates protocol failure\n"); + usb_stor_dbg(us, "-- transport indicates protocol failure\n"); srb->result = SAM_STAT_CHECK_CONDITION; return; case USB_STOR_TRANSPORT_FAILED: - US_DEBUGP("-- transport indicates command failure\n"); + usb_stor_dbg(us, "-- transport indicates command failure\n"); need_auto_sense = 1; break; case USB_STOR_TRANSPORT_ERROR: - US_DEBUGP("-- transport indicates transport error\n"); + usb_stor_dbg(us, "-- transport indicates transport error\n"); srb->result = DID_ERROR << 16; /* Need reset here */ return; default: - US_DEBUGP("-- transport indicates unknown error\n"); + usb_stor_dbg(us, "-- transport indicates unknown error\n"); srb->result = DID_ERROR << 16; /* Need reset here */ return; @@ -669,14 +670,14 @@ static void isd200_invoke_transport( struct us_data *us, (srb->cmnd[0] == MODE_SENSE) || (srb->cmnd[0] == LOG_SENSE) || (srb->cmnd[0] == MODE_SENSE_10))) { - US_DEBUGP("-- unexpectedly short transfer\n"); + usb_stor_dbg(us, "-- unexpectedly short transfer\n"); need_auto_sense = 1; } if (need_auto_sense) { result = isd200_read_regs(us); if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { - US_DEBUGP("-- auto-sense aborted\n"); + usb_stor_dbg(us, "-- auto-sense aborted\n"); goto Handle_Abort; } if (result == ISD200_GOOD) { @@ -710,40 +711,40 @@ static void isd200_invoke_transport( struct us_data *us, } #ifdef CONFIG_USB_STORAGE_DEBUG -static void isd200_log_config( struct isd200_info* info ) +static void isd200_log_config(struct us_data *us, struct isd200_info *info) { - US_DEBUGP(" Event Notification: 0x%x\n", - info->ConfigData.EventNotification); - US_DEBUGP(" External Clock: 0x%x\n", - info->ConfigData.ExternalClock); - US_DEBUGP(" ATA Init Timeout: 0x%x\n", - info->ConfigData.ATAInitTimeout); - US_DEBUGP(" ATAPI Command Block Size: 0x%x\n", - (info->ConfigData.ATAConfig & ATACFG_BLOCKSIZE) >> 6); - US_DEBUGP(" Master/Slave Selection: 0x%x\n", - info->ConfigData.ATAConfig & ATACFG_MASTER); - US_DEBUGP(" ATAPI Reset: 0x%x\n", - info->ConfigData.ATAConfig & ATACFG_ATAPI_RESET); - US_DEBUGP(" ATA Timing: 0x%x\n", - info->ConfigData.ATAConfig & ATACFG_TIMING); - US_DEBUGP(" ATA Major Command: 0x%x\n", - info->ConfigData.ATAMajorCommand); - US_DEBUGP(" ATA Minor Command: 0x%x\n", - info->ConfigData.ATAMinorCommand); - US_DEBUGP(" Init Status: 0x%x\n", - info->ConfigData.ATAExtraConfig & ATACFGE_INIT_STATUS); - US_DEBUGP(" Config Descriptor 2: 0x%x\n", - info->ConfigData.ATAExtraConfig & ATACFGE_CONF_DESC2); - US_DEBUGP(" Skip Device Boot: 0x%x\n", - info->ConfigData.ATAExtraConfig & ATACFGE_SKIP_BOOT); - US_DEBUGP(" ATA 3 State Supsend: 0x%x\n", - info->ConfigData.ATAExtraConfig & ATACFGE_STATE_SUSPEND); - US_DEBUGP(" Descriptor Override: 0x%x\n", - info->ConfigData.ATAExtraConfig & ATACFGE_DESC_OVERRIDE); - US_DEBUGP(" Last LUN Identifier: 0x%x\n", - info->ConfigData.ATAExtraConfig & ATACFGE_LAST_LUN); - US_DEBUGP(" SRST Enable: 0x%x\n", - info->ConfigData.ATAExtraConfig & CFG_CAPABILITY_SRST); + usb_stor_dbg(us, " Event Notification: 0x%x\n", + info->ConfigData.EventNotification); + usb_stor_dbg(us, " External Clock: 0x%x\n", + info->ConfigData.ExternalClock); + usb_stor_dbg(us, " ATA Init Timeout: 0x%x\n", + info->ConfigData.ATAInitTimeout); + usb_stor_dbg(us, " ATAPI Command Block Size: 0x%x\n", + (info->ConfigData.ATAConfig & ATACFG_BLOCKSIZE) >> 6); + usb_stor_dbg(us, " Master/Slave Selection: 0x%x\n", + info->ConfigData.ATAConfig & ATACFG_MASTER); + usb_stor_dbg(us, " ATAPI Reset: 0x%x\n", + info->ConfigData.ATAConfig & ATACFG_ATAPI_RESET); + usb_stor_dbg(us, " ATA Timing: 0x%x\n", + info->ConfigData.ATAConfig & ATACFG_TIMING); + usb_stor_dbg(us, " ATA Major Command: 0x%x\n", + info->ConfigData.ATAMajorCommand); + usb_stor_dbg(us, " ATA Minor Command: 0x%x\n", + info->ConfigData.ATAMinorCommand); + usb_stor_dbg(us, " Init Status: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_INIT_STATUS); + usb_stor_dbg(us, " Config Descriptor 2: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_CONF_DESC2); + usb_stor_dbg(us, " Skip Device Boot: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_SKIP_BOOT); + usb_stor_dbg(us, " ATA 3 State Supsend: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_STATE_SUSPEND); + usb_stor_dbg(us, " Descriptor Override: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_DESC_OVERRIDE); + usb_stor_dbg(us, " Last LUN Identifier: 0x%x\n", + info->ConfigData.ATAExtraConfig & ATACFGE_LAST_LUN); + usb_stor_dbg(us, " SRST Enable: 0x%x\n", + info->ConfigData.ATAExtraConfig & CFG_CAPABILITY_SRST); } #endif @@ -762,9 +763,9 @@ static int isd200_write_config( struct us_data *us ) int result; #ifdef CONFIG_USB_STORAGE_DEBUG - US_DEBUGP("Entering isd200_write_config\n"); - US_DEBUGP(" Writing the following ISD200 Config Data:\n"); - isd200_log_config(info); + usb_stor_dbg(us, "Entering isd200_write_config\n"); + usb_stor_dbg(us, " Writing the following ISD200 Config Data:\n"); + isd200_log_config(us, info); #endif /* let's send the command via the control pipe */ @@ -779,13 +780,13 @@ static int isd200_write_config( struct us_data *us ) sizeof(info->ConfigData)); if (result >= 0) { - US_DEBUGP(" ISD200 Config Data was written successfully\n"); + usb_stor_dbg(us, " ISD200 Config Data was written successfully\n"); } else { - US_DEBUGP(" Request to write ISD200 Config Data failed!\n"); + usb_stor_dbg(us, " Request to write ISD200 Config Data failed!\n"); retStatus = ISD200_ERROR; } - US_DEBUGP("Leaving isd200_write_config %08X\n", retStatus); + usb_stor_dbg(us, "Leaving isd200_write_config %08X\n", retStatus); return retStatus; } @@ -804,7 +805,7 @@ static int isd200_read_config( struct us_data *us ) int retStatus = ISD200_GOOD; int result; - US_DEBUGP("Entering isd200_read_config\n"); + usb_stor_dbg(us, "Entering isd200_read_config\n"); /* read the configuration information from ISD200. Use this to */ /* determine what the special ATA CDB bytes are. */ @@ -821,16 +822,16 @@ static int isd200_read_config( struct us_data *us ) if (result >= 0) { - US_DEBUGP(" Retrieved the following ISD200 Config Data:\n"); + usb_stor_dbg(us, " Retrieved the following ISD200 Config Data:\n"); #ifdef CONFIG_USB_STORAGE_DEBUG - isd200_log_config(info); + isd200_log_config(us, info); #endif } else { - US_DEBUGP(" Request to get ISD200 Config Data failed!\n"); + usb_stor_dbg(us, " Request to get ISD200 Config Data failed!\n"); retStatus = ISD200_ERROR; } - US_DEBUGP("Leaving isd200_read_config %08X\n", retStatus); + usb_stor_dbg(us, "Leaving isd200_read_config %08X\n", retStatus); return retStatus; } @@ -848,15 +849,15 @@ static int isd200_atapi_soft_reset( struct us_data *us ) int retStatus = ISD200_GOOD; int transferStatus; - US_DEBUGP("Entering isd200_atapi_soft_reset\n"); + usb_stor_dbg(us, "Entering isd200_atapi_soft_reset\n"); transferStatus = isd200_action( us, ACTION_SOFT_RESET, NULL, 0 ); if (transferStatus != ISD200_TRANSPORT_GOOD) { - US_DEBUGP(" Error issuing Atapi Soft Reset\n"); + usb_stor_dbg(us, " Error issuing Atapi Soft Reset\n"); retStatus = ISD200_ERROR; } - US_DEBUGP("Leaving isd200_atapi_soft_reset %08X\n", retStatus); + usb_stor_dbg(us, "Leaving isd200_atapi_soft_reset %08X\n", retStatus); return retStatus; } @@ -874,13 +875,13 @@ static int isd200_srst( struct us_data *us ) int retStatus = ISD200_GOOD; int transferStatus; - US_DEBUGP("Entering isd200_SRST\n"); + usb_stor_dbg(us, "Entering isd200_SRST\n"); transferStatus = isd200_action( us, ACTION_RESET, NULL, 0 ); /* check to see if this request failed */ if (transferStatus != ISD200_TRANSPORT_GOOD) { - US_DEBUGP(" Error issuing SRST\n"); + usb_stor_dbg(us, " Error issuing SRST\n"); retStatus = ISD200_ERROR; } else { /* delay 10ms to give the drive a chance to see it */ @@ -888,7 +889,7 @@ static int isd200_srst( struct us_data *us ) transferStatus = isd200_action( us, ACTION_REENABLE, NULL, 0 ); if (transferStatus != ISD200_TRANSPORT_GOOD) { - US_DEBUGP(" Error taking drive out of reset\n"); + usb_stor_dbg(us, " Error taking drive out of reset\n"); retStatus = ISD200_ERROR; } else { /* delay 50ms to give the drive a chance to recover after SRST */ @@ -896,7 +897,7 @@ static int isd200_srst( struct us_data *us ) } } - US_DEBUGP("Leaving isd200_srst %08X\n", retStatus); + usb_stor_dbg(us, "Leaving isd200_srst %08X\n", retStatus); return retStatus; } @@ -926,10 +927,6 @@ static int isd200_try_enum(struct us_data *us, unsigned char master_slave, /* loop until we detect !BSY or timeout */ while(1) { -#ifdef CONFIG_USB_STORAGE_DEBUG - char* mstr = master_slave == ATA_ADDRESS_DEVHEAD_STD ? - "Master" : "Slave"; -#endif status = isd200_action( us, ACTION_ENUM, NULL, master_slave ); if ( status != ISD200_GOOD ) @@ -942,9 +939,13 @@ static int isd200_try_enum(struct us_data *us, unsigned char master_slave, if (!detect) { if (regs[ATA_REG_STATUS_OFFSET] & ATA_BUSY) { - US_DEBUGP(" %s status is still BSY, try again...\n",mstr); + usb_stor_dbg(us, " %s status is still BSY, try again...\n", + master_slave == ATA_ADDRESS_DEVHEAD_STD ? + "Master" : "Slave"); } else { - US_DEBUGP(" %s status !BSY, continue with next operation\n",mstr); + usb_stor_dbg(us, " %s status !BSY, continue with next operation\n", + master_slave == ATA_ADDRESS_DEVHEAD_STD ? + "Master" : "Slave"); break; } } @@ -953,11 +954,11 @@ static int isd200_try_enum(struct us_data *us, unsigned char master_slave, /* ATA_ERR (workaround for Archos CD-ROM) */ else if (regs[ATA_REG_STATUS_OFFSET] & (ATA_BUSY | ATA_DF | ATA_ERR)) { - US_DEBUGP(" Status indicates it is not ready, try again...\n"); + usb_stor_dbg(us, " Status indicates it is not ready, try again...\n"); } /* check for DRDY, ATA devices set DRDY after SRST */ else if (regs[ATA_REG_STATUS_OFFSET] & ATA_DRDY) { - US_DEBUGP(" Identified ATA device\n"); + usb_stor_dbg(us, " Identified ATA device\n"); info->DeviceFlags |= DF_ATA_DEVICE; info->DeviceHead = master_slave; break; @@ -978,27 +979,27 @@ static int isd200_try_enum(struct us_data *us, unsigned char master_slave, */ if ((master_slave & ATA_ADDRESS_DEVHEAD_SLAVE) && !recheckAsMaster) { - US_DEBUGP(" Identified ATAPI device as slave. Rechecking again as master\n"); + usb_stor_dbg(us, " Identified ATAPI device as slave. Rechecking again as master\n"); recheckAsMaster = 1; master_slave = ATA_ADDRESS_DEVHEAD_STD; } else { - US_DEBUGP(" Identified ATAPI device\n"); + usb_stor_dbg(us, " Identified ATAPI device\n"); info->DeviceHead = master_slave; status = isd200_atapi_soft_reset(us); break; } } else { - US_DEBUGP(" Not ATA, not ATAPI. Weird.\n"); + usb_stor_dbg(us, " Not ATA, not ATAPI - Weird\n"); break; } /* check for timeout on this request */ if (time_after_eq(jiffies, endTime)) { if (!detect) - US_DEBUGP(" BSY check timeout, just continue with next operation...\n"); + usb_stor_dbg(us, " BSY check timeout, just continue with next operation...\n"); else - US_DEBUGP(" Device detect timeout!\n"); + usb_stor_dbg(us, " Device detect timeout!\n"); break; } } @@ -1020,7 +1021,7 @@ static int isd200_manual_enum(struct us_data *us) struct isd200_info *info = (struct isd200_info *)us->extra; int retStatus = ISD200_GOOD; - US_DEBUGP("Entering isd200_manual_enum\n"); + usb_stor_dbg(us, "Entering isd200_manual_enum\n"); retStatus = isd200_read_config(us); if (retStatus == ISD200_GOOD) { @@ -1039,14 +1040,15 @@ static int isd200_manual_enum(struct us_data *us) isslave = (info->DeviceHead & ATA_ADDRESS_DEVHEAD_SLAVE) ? 1 : 0; if (!(info->ConfigData.ATAConfig & ATACFG_MASTER)) { - US_DEBUGP(" Setting Master/Slave selection to %d\n", isslave); + usb_stor_dbg(us, " Setting Master/Slave selection to %d\n", + isslave); info->ConfigData.ATAConfig &= 0x3f; info->ConfigData.ATAConfig |= (isslave<<6); retStatus = isd200_write_config(us); } } - US_DEBUGP("Leaving isd200_manual_enum %08X\n", retStatus); + usb_stor_dbg(us, "Leaving isd200_manual_enum %08X\n", retStatus); return(retStatus); } @@ -1064,35 +1066,35 @@ static void isd200_fix_driveid(u16 *id) #endif } -static void isd200_dump_driveid(u16 *id) +static void isd200_dump_driveid(struct us_data *us, u16 *id) { - US_DEBUGP(" Identify Data Structure:\n"); - US_DEBUGP(" config = 0x%x\n", id[ATA_ID_CONFIG]); - US_DEBUGP(" cyls = 0x%x\n", id[ATA_ID_CYLS]); - US_DEBUGP(" heads = 0x%x\n", id[ATA_ID_HEADS]); - US_DEBUGP(" track_bytes = 0x%x\n", id[4]); - US_DEBUGP(" sector_bytes = 0x%x\n", id[5]); - US_DEBUGP(" sectors = 0x%x\n", id[ATA_ID_SECTORS]); - US_DEBUGP(" serial_no[0] = 0x%x\n", *(char *)&id[ATA_ID_SERNO]); - US_DEBUGP(" buf_type = 0x%x\n", id[20]); - US_DEBUGP(" buf_size = 0x%x\n", id[ATA_ID_BUF_SIZE]); - US_DEBUGP(" ecc_bytes = 0x%x\n", id[22]); - US_DEBUGP(" fw_rev[0] = 0x%x\n", *(char *)&id[ATA_ID_FW_REV]); - US_DEBUGP(" model[0] = 0x%x\n", *(char *)&id[ATA_ID_PROD]); - US_DEBUGP(" max_multsect = 0x%x\n", id[ATA_ID_MAX_MULTSECT] & 0xff); - US_DEBUGP(" dword_io = 0x%x\n", id[ATA_ID_DWORD_IO]); - US_DEBUGP(" capability = 0x%x\n", id[ATA_ID_CAPABILITY] >> 8); - US_DEBUGP(" tPIO = 0x%x\n", id[ATA_ID_OLD_PIO_MODES] >> 8); - US_DEBUGP(" tDMA = 0x%x\n", id[ATA_ID_OLD_DMA_MODES] >> 8); - US_DEBUGP(" field_valid = 0x%x\n", id[ATA_ID_FIELD_VALID]); - US_DEBUGP(" cur_cyls = 0x%x\n", id[ATA_ID_CUR_CYLS]); - US_DEBUGP(" cur_heads = 0x%x\n", id[ATA_ID_CUR_HEADS]); - US_DEBUGP(" cur_sectors = 0x%x\n", id[ATA_ID_CUR_SECTORS]); - US_DEBUGP(" cur_capacity = 0x%x\n", ata_id_u32(id, 57)); - US_DEBUGP(" multsect = 0x%x\n", id[ATA_ID_MULTSECT] & 0xff); - US_DEBUGP(" lba_capacity = 0x%x\n", ata_id_u32(id, ATA_ID_LBA_CAPACITY)); - US_DEBUGP(" command_set_1 = 0x%x\n", id[ATA_ID_COMMAND_SET_1]); - US_DEBUGP(" command_set_2 = 0x%x\n", id[ATA_ID_COMMAND_SET_2]); + usb_stor_dbg(us, " Identify Data Structure:\n"); + usb_stor_dbg(us, " config = 0x%x\n", id[ATA_ID_CONFIG]); + usb_stor_dbg(us, " cyls = 0x%x\n", id[ATA_ID_CYLS]); + usb_stor_dbg(us, " heads = 0x%x\n", id[ATA_ID_HEADS]); + usb_stor_dbg(us, " track_bytes = 0x%x\n", id[4]); + usb_stor_dbg(us, " sector_bytes = 0x%x\n", id[5]); + usb_stor_dbg(us, " sectors = 0x%x\n", id[ATA_ID_SECTORS]); + usb_stor_dbg(us, " serial_no[0] = 0x%x\n", *(char *)&id[ATA_ID_SERNO]); + usb_stor_dbg(us, " buf_type = 0x%x\n", id[20]); + usb_stor_dbg(us, " buf_size = 0x%x\n", id[ATA_ID_BUF_SIZE]); + usb_stor_dbg(us, " ecc_bytes = 0x%x\n", id[22]); + usb_stor_dbg(us, " fw_rev[0] = 0x%x\n", *(char *)&id[ATA_ID_FW_REV]); + usb_stor_dbg(us, " model[0] = 0x%x\n", *(char *)&id[ATA_ID_PROD]); + usb_stor_dbg(us, " max_multsect = 0x%x\n", id[ATA_ID_MAX_MULTSECT] & 0xff); + usb_stor_dbg(us, " dword_io = 0x%x\n", id[ATA_ID_DWORD_IO]); + usb_stor_dbg(us, " capability = 0x%x\n", id[ATA_ID_CAPABILITY] >> 8); + usb_stor_dbg(us, " tPIO = 0x%x\n", id[ATA_ID_OLD_PIO_MODES] >> 8); + usb_stor_dbg(us, " tDMA = 0x%x\n", id[ATA_ID_OLD_DMA_MODES] >> 8); + usb_stor_dbg(us, " field_valid = 0x%x\n", id[ATA_ID_FIELD_VALID]); + usb_stor_dbg(us, " cur_cyls = 0x%x\n", id[ATA_ID_CUR_CYLS]); + usb_stor_dbg(us, " cur_heads = 0x%x\n", id[ATA_ID_CUR_HEADS]); + usb_stor_dbg(us, " cur_sectors = 0x%x\n", id[ATA_ID_CUR_SECTORS]); + usb_stor_dbg(us, " cur_capacity = 0x%x\n", ata_id_u32(id, 57)); + usb_stor_dbg(us, " multsect = 0x%x\n", id[ATA_ID_MULTSECT] & 0xff); + usb_stor_dbg(us, " lba_capacity = 0x%x\n", ata_id_u32(id, ATA_ID_LBA_CAPACITY)); + usb_stor_dbg(us, " command_set_1 = 0x%x\n", id[ATA_ID_COMMAND_SET_1]); + usb_stor_dbg(us, " command_set_2 = 0x%x\n", id[ATA_ID_COMMAND_SET_2]); } /************************************************************************** @@ -1109,7 +1111,7 @@ static int isd200_get_inquiry_data( struct us_data *us ) int retStatus = ISD200_GOOD; u16 *id = info->id; - US_DEBUGP("Entering isd200_get_inquiry_data\n"); + usb_stor_dbg(us, "Entering isd200_get_inquiry_data\n"); /* set default to Master */ info->DeviceHead = ATA_ADDRESS_DEVHEAD_STD; @@ -1127,7 +1129,7 @@ static int isd200_get_inquiry_data( struct us_data *us ) id, ATA_ID_WORDS * 2); if (transferStatus != ISD200_TRANSPORT_GOOD) { /* Error issuing ATA Command Identify */ - US_DEBUGP(" Error issuing ATA Command Identify\n"); + usb_stor_dbg(us, " Error issuing ATA Command Identify\n"); retStatus = ISD200_ERROR; } else { /* ATA Command Identify successful */ @@ -1136,7 +1138,7 @@ static int isd200_get_inquiry_data( struct us_data *us ) __u16 *dest; isd200_fix_driveid(id); - isd200_dump_driveid(id); + isd200_dump_driveid(us, id); memset(&info->InquiryData, 0, sizeof(info->InquiryData)); @@ -1170,7 +1172,7 @@ static int isd200_get_inquiry_data( struct us_data *us ) /* determine if it supports Media Status Notification */ if (id[ATA_ID_COMMAND_SET_2] & COMMANDSET_MEDIA_STATUS) { - US_DEBUGP(" Device supports Media Status Notification\n"); + usb_stor_dbg(us, " Device supports Media Status Notification\n"); /* Indicate that it is enabled, even though it is not * This allows the lock/unlock of the media to work @@ -1190,7 +1192,8 @@ static int isd200_get_inquiry_data( struct us_data *us ) us->protocol_name = "Transparent SCSI"; us->proto_handler = usb_stor_transparent_scsi_command; - US_DEBUGP("Protocol changed to: %s\n", us->protocol_name); + usb_stor_dbg(us, "Protocol changed to: %s\n", + us->protocol_name); /* Free driver structure */ us->extra_destructor(info); @@ -1200,7 +1203,7 @@ static int isd200_get_inquiry_data( struct us_data *us ) } } - US_DEBUGP("Leaving isd200_get_inquiry_data %08X\n", retStatus); + usb_stor_dbg(us, "Leaving isd200_get_inquiry_data %08X\n", retStatus); return(retStatus); } @@ -1231,7 +1234,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, /* SCSI Command */ switch (srb->cmnd[0]) { case INQUIRY: - US_DEBUGP(" ATA OUT - INQUIRY\n"); + usb_stor_dbg(us, " ATA OUT - INQUIRY\n"); /* copy InquiryData */ usb_stor_set_xfer_buf((unsigned char *) &info->InquiryData, @@ -1241,7 +1244,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, break; case MODE_SENSE: - US_DEBUGP(" ATA OUT - SCSIOP_MODE_SENSE\n"); + usb_stor_dbg(us, " ATA OUT - SCSIOP_MODE_SENSE\n"); /* Initialize the return buffer */ usb_stor_set_xfer_buf(senseData, sizeof(senseData), srb); @@ -1255,14 +1258,14 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; isd200_srb_set_bufflen(srb, 0); } else { - US_DEBUGP(" Media Status not supported, just report okay\n"); + usb_stor_dbg(us, " Media Status not supported, just report okay\n"); srb->result = SAM_STAT_GOOD; sendToTransport = 0; } break; case TEST_UNIT_READY: - US_DEBUGP(" ATA OUT - SCSIOP_TEST_UNIT_READY\n"); + usb_stor_dbg(us, " ATA OUT - SCSIOP_TEST_UNIT_READY\n"); if (info->DeviceFlags & DF_MEDIA_STATUS_ENABLED) { @@ -1273,7 +1276,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; isd200_srb_set_bufflen(srb, 0); } else { - US_DEBUGP(" Media Status not supported, just report okay\n"); + usb_stor_dbg(us, " Media Status not supported, just report okay\n"); srb->result = SAM_STAT_GOOD; sendToTransport = 0; } @@ -1284,7 +1287,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, unsigned long capacity; struct read_capacity_data readCapacityData; - US_DEBUGP(" ATA OUT - SCSIOP_READ_CAPACITY\n"); + usb_stor_dbg(us, " ATA OUT - SCSIOP_READ_CAPACITY\n"); if (ata_id_has_lba(id)) capacity = ata_id_u32(id, ATA_ID_LBA_CAPACITY) - 1; @@ -1303,7 +1306,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, break; case READ_10: - US_DEBUGP(" ATA OUT - SCSIOP_READ\n"); + usb_stor_dbg(us, " ATA OUT - SCSIOP_READ\n"); lba = be32_to_cpu(*(__be32 *)&srb->cmnd[2]); blockCount = (unsigned long)srb->cmnd[7]<<8 | (unsigned long)srb->cmnd[8]; @@ -1335,7 +1338,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, break; case WRITE_10: - US_DEBUGP(" ATA OUT - SCSIOP_WRITE\n"); + usb_stor_dbg(us, " ATA OUT - SCSIOP_WRITE\n"); lba = be32_to_cpu(*(__be32 *)&srb->cmnd[2]); blockCount = (unsigned long)srb->cmnd[7]<<8 | (unsigned long)srb->cmnd[8]; @@ -1367,10 +1370,11 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, break; case ALLOW_MEDIUM_REMOVAL: - US_DEBUGP(" ATA OUT - SCSIOP_MEDIUM_REMOVAL\n"); + usb_stor_dbg(us, " ATA OUT - SCSIOP_MEDIUM_REMOVAL\n"); if (info->DeviceFlags & DF_REMOVABLE_MEDIA) { - US_DEBUGP(" srb->cmnd[4] = 0x%X\n", srb->cmnd[4]); + usb_stor_dbg(us, " srb->cmnd[4] = 0x%X\n", + srb->cmnd[4]); ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; @@ -1380,25 +1384,25 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK; isd200_srb_set_bufflen(srb, 0); } else { - US_DEBUGP(" Not removeable media, just report okay\n"); + usb_stor_dbg(us, " Not removeable media, just report okay\n"); srb->result = SAM_STAT_GOOD; sendToTransport = 0; } break; case START_STOP: - US_DEBUGP(" ATA OUT - SCSIOP_START_STOP_UNIT\n"); - US_DEBUGP(" srb->cmnd[4] = 0x%X\n", srb->cmnd[4]); + usb_stor_dbg(us, " ATA OUT - SCSIOP_START_STOP_UNIT\n"); + usb_stor_dbg(us, " srb->cmnd[4] = 0x%X\n", srb->cmnd[4]); if ((srb->cmnd[4] & 0x3) == 0x2) { - US_DEBUGP(" Media Eject\n"); + usb_stor_dbg(us, " Media Eject\n"); ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; ataCdb->generic.TransferBlockSize = 0; ataCdb->generic.RegisterSelect = REG_COMMAND; ataCdb->write.CommandByte = ATA_COMMAND_MEDIA_EJECT; } else if ((srb->cmnd[4] & 0x3) == 0x1) { - US_DEBUGP(" Get Media Status\n"); + usb_stor_dbg(us, " Get Media Status\n"); ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; ataCdb->generic.TransferBlockSize = 1; @@ -1406,14 +1410,15 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; isd200_srb_set_bufflen(srb, 0); } else { - US_DEBUGP(" Nothing to do, just report okay\n"); + usb_stor_dbg(us, " Nothing to do, just report okay\n"); srb->result = SAM_STAT_GOOD; sendToTransport = 0; } break; default: - US_DEBUGP("Unsupported SCSI command - 0x%X\n", srb->cmnd[0]); + usb_stor_dbg(us, "Unsupported SCSI command - 0x%X\n", + srb->cmnd[0]); srb->result = DID_ERROR << 16; sendToTransport = 0; break; @@ -1457,8 +1462,7 @@ static int isd200_init_info(struct us_data *us) retStatus = ISD200_ERROR; else { info->id = kzalloc(ATA_ID_WORDS * 2, GFP_KERNEL); - info->RegsBuf = (unsigned char *) - kmalloc(sizeof(info->ATARegs), GFP_KERNEL); + info->RegsBuf = kmalloc(sizeof(info->ATARegs), GFP_KERNEL); info->srb.sense_buffer = kmalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL); if (!info->id || !info->RegsBuf || !info->srb.sense_buffer) { @@ -1471,8 +1475,7 @@ static int isd200_init_info(struct us_data *us) if (retStatus == ISD200_GOOD) { us->extra = info; us->extra_destructor = isd200_free_info_ptrs; - } else - US_DEBUGP("ERROR - kmalloc failure\n"); + } return retStatus; } @@ -1483,19 +1486,19 @@ static int isd200_init_info(struct us_data *us) static int isd200_Initialization(struct us_data *us) { - US_DEBUGP("ISD200 Initialization...\n"); + usb_stor_dbg(us, "ISD200 Initialization...\n"); /* Initialize ISD200 info struct */ if (isd200_init_info(us) == ISD200_ERROR) { - US_DEBUGP("ERROR Initializing ISD200 Info struct\n"); + usb_stor_dbg(us, "ERROR Initializing ISD200 Info struct\n"); } else { /* Get device specific data */ if (isd200_get_inquiry_data(us) != ISD200_GOOD) - US_DEBUGP("ISD200 Initialization Failure\n"); + usb_stor_dbg(us, "ISD200 Initialization Failure\n"); else - US_DEBUGP("ISD200 Initialization complete\n"); + usb_stor_dbg(us, "ISD200 Initialization complete\n"); } return 0; @@ -1520,7 +1523,7 @@ static void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us) /* Make sure driver was initialized */ if (us->extra == NULL) - US_DEBUGP("ERROR Driver not initialized\n"); + usb_stor_dbg(us, "ERROR Driver not initialized\n"); scsi_set_resid(srb, 0); /* scsi_bufflen might change in protocol translation to ata */ diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c index ddc78780b1ad..563078be6547 100644 --- a/drivers/usb/storage/jumpshot.c +++ b/drivers/usb/storage/jumpshot.c @@ -118,7 +118,7 @@ static inline int jumpshot_bulk_read(struct us_data *us, if (len == 0) return USB_STOR_XFER_GOOD; - US_DEBUGP("jumpshot_bulk_read: len = %d\n", len); + usb_stor_dbg(us, "len = %d\n", len); return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, data, len, NULL); } @@ -131,7 +131,7 @@ static inline int jumpshot_bulk_write(struct us_data *us, if (len == 0) return USB_STOR_XFER_GOOD; - US_DEBUGP("jumpshot_bulk_write: len = %d\n", len); + usb_stor_dbg(us, "len = %d\n", len); return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, data, len, NULL); } @@ -152,8 +152,7 @@ static int jumpshot_get_status(struct us_data *us) return USB_STOR_TRANSPORT_ERROR; if (us->iobuf[0] != 0x50) { - US_DEBUGP("jumpshot_get_status: 0x%2x\n", - us->iobuf[0]); + usb_stor_dbg(us, "0x%2x\n", us->iobuf[0]); return USB_STOR_TRANSPORT_ERROR; } @@ -218,7 +217,7 @@ static int jumpshot_read_data(struct us_data *us, if (result != USB_STOR_XFER_GOOD) goto leave; - US_DEBUGP("jumpshot_read_data: %d bytes\n", len); + usb_stor_dbg(us, "%d bytes\n", len); // Store the data in the transfer buffer usb_stor_access_xfer_buf(buffer, len, us->srb, @@ -314,7 +313,7 @@ static int jumpshot_write_data(struct us_data *us, } while ((result != USB_STOR_TRANSPORT_GOOD) && (waitcount < 10)); if (result != USB_STOR_TRANSPORT_GOOD) - US_DEBUGP("jumpshot_write_data: Gah! Waitcount = 10. Bad write!?\n"); + usb_stor_dbg(us, "Gah! Waitcount = 10. Bad write!?\n"); sector += thistime; totallen -= len; @@ -349,8 +348,7 @@ static int jumpshot_id_device(struct us_data *us, 0, 0x20, 0, 6, command, 2); if (rc != USB_STOR_XFER_GOOD) { - US_DEBUGP("jumpshot_id_device: Gah! " - "send_control for read_capacity failed\n"); + usb_stor_dbg(us, "Gah! send_control for read_capacity failed\n"); rc = USB_STOR_TRANSPORT_ERROR; goto leave; } @@ -400,17 +398,17 @@ static int jumpshot_handle_mode_sense(struct us_data *us, switch (pc) { case 0x0: - US_DEBUGP("jumpshot_handle_mode_sense: Current values\n"); - break; + usb_stor_dbg(us, "Current values\n"); + break; case 0x1: - US_DEBUGP("jumpshot_handle_mode_sense: Changeable values\n"); - break; + usb_stor_dbg(us, "Changeable values\n"); + break; case 0x2: - US_DEBUGP("jumpshot_handle_mode_sense: Default values\n"); - break; + usb_stor_dbg(us, "Default values\n"); + break; case 0x3: - US_DEBUGP("jumpshot_handle_mode_sense: Saves values\n"); - break; + usb_stor_dbg(us, "Saves values\n"); + break; } memset(ptr, 0, 8); @@ -494,17 +492,16 @@ static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us) if (!us->extra) { us->extra = kzalloc(sizeof(struct jumpshot_info), GFP_NOIO); - if (!us->extra) { - US_DEBUGP("jumpshot_transport: Gah! Can't allocate storage for jumpshot info struct!\n"); + if (!us->extra) return USB_STOR_TRANSPORT_ERROR; - } + us->extra_destructor = jumpshot_info_destructor; } info = (struct jumpshot_info *) (us->extra); if (srb->cmnd[0] == INQUIRY) { - US_DEBUGP("jumpshot_transport: INQUIRY. Returning bogus response.\n"); + usb_stor_dbg(us, "INQUIRY - Returning bogus response\n"); memcpy(ptr, inquiry_response, sizeof(inquiry_response)); fill_inquiry_response(us, ptr, 36); return USB_STOR_TRANSPORT_GOOD; @@ -521,8 +518,8 @@ static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us) if (rc != USB_STOR_TRANSPORT_GOOD) return rc; - US_DEBUGP("jumpshot_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n", - info->sectors, info->ssize); + usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n", + info->sectors, info->ssize); // build the reply // @@ -534,7 +531,7 @@ static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us) } if (srb->cmnd[0] == MODE_SELECT_10) { - US_DEBUGP("jumpshot_transport: Gah! MODE_SELECT_10.\n"); + usb_stor_dbg(us, "Gah! MODE_SELECT_10\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -544,7 +541,8 @@ static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us) blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); - US_DEBUGP("jumpshot_transport: READ_10: read block 0x%04lx count %ld\n", block, blocks); + usb_stor_dbg(us, "READ_10: read block 0x%04lx count %ld\n", + block, blocks); return jumpshot_read_data(us, info, block, blocks); } @@ -557,7 +555,8 @@ static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us) blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); - US_DEBUGP("jumpshot_transport: READ_12: read block 0x%04lx count %ld\n", block, blocks); + usb_stor_dbg(us, "READ_12: read block 0x%04lx count %ld\n", + block, blocks); return jumpshot_read_data(us, info, block, blocks); } @@ -567,7 +566,8 @@ static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us) blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); - US_DEBUGP("jumpshot_transport: WRITE_10: write block 0x%04lx count %ld\n", block, blocks); + usb_stor_dbg(us, "WRITE_10: write block 0x%04lx count %ld\n", + block, blocks); return jumpshot_write_data(us, info, block, blocks); } @@ -580,18 +580,19 @@ static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us) blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); - US_DEBUGP("jumpshot_transport: WRITE_12: write block 0x%04lx count %ld\n", block, blocks); + usb_stor_dbg(us, "WRITE_12: write block 0x%04lx count %ld\n", + block, blocks); return jumpshot_write_data(us, info, block, blocks); } if (srb->cmnd[0] == TEST_UNIT_READY) { - US_DEBUGP("jumpshot_transport: TEST_UNIT_READY.\n"); + usb_stor_dbg(us, "TEST_UNIT_READY\n"); return jumpshot_get_status(us); } if (srb->cmnd[0] == REQUEST_SENSE) { - US_DEBUGP("jumpshot_transport: REQUEST_SENSE.\n"); + usb_stor_dbg(us, "REQUEST_SENSE\n"); memset(ptr, 0, 18); ptr[0] = 0xF0; @@ -605,12 +606,12 @@ static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us) } if (srb->cmnd[0] == MODE_SENSE) { - US_DEBUGP("jumpshot_transport: MODE_SENSE_6 detected\n"); + usb_stor_dbg(us, "MODE_SENSE_6 detected\n"); return jumpshot_handle_mode_sense(us, srb, 1); } if (srb->cmnd[0] == MODE_SENSE_10) { - US_DEBUGP("jumpshot_transport: MODE_SENSE_10 detected\n"); + usb_stor_dbg(us, "MODE_SENSE_10 detected\n"); return jumpshot_handle_mode_sense(us, srb, 0); } @@ -624,7 +625,7 @@ static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us) if (srb->cmnd[0] == START_STOP) { /* this is used by sd.c'check_scsidisk_media_change to detect media change */ - US_DEBUGP("jumpshot_transport: START_STOP.\n"); + usb_stor_dbg(us, "START_STOP\n"); /* the first jumpshot_id_device after a media change returns an error (determined experimentally) */ rc = jumpshot_id_device(us, info); @@ -638,8 +639,8 @@ static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us) return rc; } - US_DEBUGP("jumpshot_transport: Gah! Unknown command: %d (0x%x)\n", - srb->cmnd[0], srb->cmnd[0]); + usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n", + srb->cmnd[0], srb->cmnd[0]); info->sense_key = 0x05; info->sense_asc = 0x20; info->sense_ascq = 0x00; diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c index f085ffb606c8..94d16ee5e84b 100644 --- a/drivers/usb/storage/karma.c +++ b/drivers/usb/storage/karma.c @@ -106,7 +106,7 @@ static int rio_karma_send_command(char cmd, struct us_data *us) static unsigned char seq = 1; struct karma_data *data = (struct karma_data *) us->extra; - US_DEBUGP("karma: sending command %04x\n", cmd); + usb_stor_dbg(us, "sending command %04x\n", cmd); memset(us->iobuf, 0, RIO_SEND_LEN); memcpy(us->iobuf, RIO_PREFIX, RIO_PREFIX_LEN); us->iobuf[5] = cmd; @@ -139,10 +139,10 @@ static int rio_karma_send_command(char cmd, struct us_data *us) if (seq == 0) seq = 1; - US_DEBUGP("karma: sent command %04x\n", cmd); + usb_stor_dbg(us, "sent command %04x\n", cmd); return 0; err: - US_DEBUGP("karma: command %04x failed\n", cmd); + usb_stor_dbg(us, "command %04x failed\n", cmd); return USB_STOR_TRANSPORT_FAILED; } diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c index cb79de61f4c8..26964895c88b 100644 --- a/drivers/usb/storage/onetouch.c +++ b/drivers/usb/storage/onetouch.c @@ -195,6 +195,7 @@ static int onetouch_connect_input(struct us_data *ss) pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress); maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); + maxp = min(maxp, ONETOUCH_PKT_LEN); onetouch = kzalloc(sizeof(struct usb_onetouch), GFP_KERNEL); input_dev = input_allocate_device(); @@ -245,8 +246,7 @@ static int onetouch_connect_input(struct us_data *ss) input_dev->open = usb_onetouch_open; input_dev->close = usb_onetouch_close; - usb_fill_int_urb(onetouch->irq, udev, pipe, onetouch->data, - (maxp > 8 ? 8 : maxp), + usb_fill_int_urb(onetouch->irq, udev, pipe, onetouch->data, maxp, usb_onetouch_irq, onetouch, endpoint->bInterval); onetouch->irq->transfer_dma = onetouch->data_dma; onetouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; diff --git a/drivers/usb/storage/option_ms.c b/drivers/usb/storage/option_ms.c index e0f76bb05915..b2b35b1d7de8 100644 --- a/drivers/usb/storage/option_ms.c +++ b/drivers/usb/storage/option_ms.c @@ -50,7 +50,7 @@ static int option_rezero(struct us_data *us) char *buffer; int result; - US_DEBUGP("Option MS: %s", "DEVICE MODE SWITCH\n"); + usb_stor_dbg(us, "Option MS: %s\n", "DEVICE MODE SWITCH"); buffer = kzalloc(RESPONSE_LEN, GFP_KERNEL); if (buffer == NULL) @@ -95,7 +95,7 @@ static int option_inquiry(struct us_data *us) char *buffer; int result; - US_DEBUGP("Option MS: %s", "device inquiry for vendor name\n"); + usb_stor_dbg(us, "Option MS: %s\n", "device inquiry for vendor name"); buffer = kzalloc(0x24, GFP_KERNEL); if (buffer == NULL) @@ -138,31 +138,32 @@ int option_ms_init(struct us_data *us) { int result; - US_DEBUGP("Option MS: option_ms_init called\n"); + usb_stor_dbg(us, "Option MS: %s\n", "option_ms_init called"); /* Additional test for vendor information via INQUIRY, * because some vendor/product IDs are ambiguous */ result = option_inquiry(us); if (result != 0) { - US_DEBUGP("Option MS: vendor is not Option or not determinable," - " no action taken\n"); + usb_stor_dbg(us, "Option MS: %s\n", + "vendor is not Option or not determinable, no action taken"); return 0; } else - US_DEBUGP("Option MS: this is a genuine Option device," - " proceeding\n"); + usb_stor_dbg(us, "Option MS: %s\n", + "this is a genuine Option device, proceeding"); /* Force Modem mode */ if (option_zero_cd == ZCD_FORCE_MODEM) { - US_DEBUGP("Option MS: %s", "Forcing Modem Mode\n"); + usb_stor_dbg(us, "Option MS: %s\n", "Forcing Modem Mode"); result = option_rezero(us); if (result != USB_STOR_XFER_GOOD) - US_DEBUGP("Option MS: Failed to switch to modem mode.\n"); + usb_stor_dbg(us, "Option MS: %s\n", + "Failed to switch to modem mode"); return -EIO; } else if (option_zero_cd == ZCD_ALLOW_MS) { /* Allow Mass Storage mode (keep CD-Rom) */ - US_DEBUGP("Option MS: %s", "Allowing Mass Storage Mode if device" - " requests it\n"); + usb_stor_dbg(us, "Option MS: %s\n", + "Allowing Mass Storage Mode if device requests it"); } return 0; diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index 6c3586a4c956..4797228747fb 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -254,8 +254,8 @@ static int rts51x_bulk_transport(struct us_data *us, u8 lun, /* check bulk status */ if (bcs->Signature != cpu_to_le32(US_BULK_CS_SIGN)) { - US_DEBUGP("Signature mismatch: got %08X, expecting %08X\n", - le32_to_cpu(bcs->Signature), US_BULK_CS_SIGN); + usb_stor_dbg(us, "Signature mismatch: got %08X, expecting %08X\n", + le32_to_cpu(bcs->Signature), US_BULK_CS_SIGN); return USB_STOR_TRANSPORT_ERROR; } @@ -351,8 +351,8 @@ static int rts51x_get_max_lun(struct us_data *us) USB_RECIP_INTERFACE, 0, us->ifnum, us->iobuf, 1, 10 * HZ); - US_DEBUGP("GetMaxLUN command result is %d, data is %d\n", - result, us->iobuf[0]); + usb_stor_dbg(us, "GetMaxLUN command result is %d, data is %d\n", + result, us->iobuf[0]); /* if we have a successful request, return the result */ if (result > 0) @@ -371,7 +371,7 @@ static int rts51x_read_mem(struct us_data *us, u16 addr, u8 *data, u16 len) if (buf == NULL) return USB_STOR_TRANSPORT_ERROR; - US_DEBUGP("%s, addr = 0x%x, len = %d\n", __func__, addr, len); + usb_stor_dbg(us, "addr = 0x%x, len = %d\n", addr, len); cmnd[0] = 0xF0; cmnd[1] = 0x0D; @@ -402,7 +402,7 @@ static int rts51x_write_mem(struct us_data *us, u16 addr, u8 *data, u16 len) if (buf == NULL) return USB_STOR_TRANSPORT_ERROR; - US_DEBUGP("%s, addr = 0x%x, len = %d\n", __func__, addr, len); + usb_stor_dbg(us, "addr = 0x%x, len = %d\n", addr, len); cmnd[0] = 0xF0; cmnd[1] = 0x0E; @@ -431,7 +431,7 @@ static int rts51x_read_status(struct us_data *us, if (buf == NULL) return USB_STOR_TRANSPORT_ERROR; - US_DEBUGP("%s, lun = %d\n", __func__, lun); + usb_stor_dbg(us, "lun = %d\n", lun); cmnd[0] = 0xF0; cmnd[1] = 0x09; @@ -458,7 +458,7 @@ static int rts51x_check_status(struct us_data *us, u8 lun) if (retval != STATUS_SUCCESS) return -EIO; - US_DEBUGP("chip->status_len = %d\n", chip->status_len); + usb_stor_dbg(us, "chip->status_len = %d\n", chip->status_len); chip->status[lun].vid = ((u16) buf[0] << 8) | buf[1]; chip->status[lun].pid = ((u16) buf[2] << 8) | buf[3]; @@ -509,7 +509,7 @@ static int __do_config_autodelink(struct us_data *us, u8 *data, u16 len) u8 cmnd[12] = {0}; u8 *buf; - US_DEBUGP("%s, addr = 0xfe47, len = %d\n", __FUNCTION__, len); + usb_stor_dbg(us, "addr = 0xfe47, len = %d\n", len); buf = kmemdup(data, len, GFP_NOIO); if (!buf) @@ -549,7 +549,7 @@ static int do_config_autodelink(struct us_data *us, int enable, int force) value &= ~0x03; } - US_DEBUGP("In %s,set 0xfe47 to 0x%x\n", __func__, value); + usb_stor_dbg(us, "set 0xfe47 to 0x%x\n", value); /* retval = rts51x_write_mem(us, 0xFE47, &value, 1); */ retval = __do_config_autodelink(us, &value, 1); @@ -565,8 +565,6 @@ static int config_autodelink_after_power_on(struct us_data *us) int retval; u8 value; - US_DEBUGP("%s: <---\n", __func__); - if (!CHK_AUTO_DELINK(chip)) return 0; @@ -624,8 +622,6 @@ static int config_autodelink_after_power_on(struct us_data *us) } } - US_DEBUGP("%s: --->\n", __func__); - return 0; } @@ -635,8 +631,6 @@ static int config_autodelink_before_power_down(struct us_data *us) int retval; u8 value; - US_DEBUGP("%s: <---\n", __func__); - if (!CHK_AUTO_DELINK(chip)) return 0; @@ -698,8 +692,6 @@ static int config_autodelink_before_power_down(struct us_data *us) } } - US_DEBUGP("%s: --->\n", __func__); - return 0; } @@ -709,23 +701,19 @@ static void fw5895_init(struct us_data *us) int retval; u8 val; - US_DEBUGP("%s: <---\n", __func__); - if ((PRODUCT_ID(chip) != 0x0158) || (FW_VERSION(chip) != 0x5895)) { - US_DEBUGP("Not the specified device, return immediately!\n"); + usb_stor_dbg(us, "Not the specified device, return immediately!\n"); } else { retval = rts51x_read_mem(us, 0xFD6F, &val, 1); if (retval == STATUS_SUCCESS && (val & 0x1F) == 0) { val = 0x1F; retval = rts51x_write_mem(us, 0xFD70, &val, 1); if (retval != STATUS_SUCCESS) - US_DEBUGP("Write memory fail\n"); + usb_stor_dbg(us, "Write memory fail\n"); } else { - US_DEBUGP("Read memory fail, OR (val & 0x1F) != 0\n"); + usb_stor_dbg(us, "Read memory fail, OR (val & 0x1F) != 0\n"); } } - - US_DEBUGP("%s: --->\n", __func__); } #ifdef CONFIG_REALTEK_AUTOPM @@ -735,10 +723,8 @@ static void fw5895_set_mmc_wp(struct us_data *us) int retval; u8 buf[13]; - US_DEBUGP("%s: <---\n", __func__); - if ((PRODUCT_ID(chip) != 0x0158) || (FW_VERSION(chip) != 0x5895)) { - US_DEBUGP("Not the specified device, return immediately!\n"); + usb_stor_dbg(us, "Not the specified device, return immediately!\n"); } else { retval = rts51x_read_mem(us, 0xFD6F, buf, 1); if (retval == STATUS_SUCCESS && (buf[0] & 0x24) == 0x24) { @@ -748,26 +734,24 @@ static void fw5895_set_mmc_wp(struct us_data *us) buf[0] |= 0x04; retval = rts51x_write_mem(us, 0xFD70, buf, 1); if (retval != STATUS_SUCCESS) - US_DEBUGP("Write memory fail\n"); + usb_stor_dbg(us, "Write memory fail\n"); } else { - US_DEBUGP("Read memory fail\n"); + usb_stor_dbg(us, "Read memory fail\n"); } } else { - US_DEBUGP("Read memory fail, OR (buf[0]&0x24)!=0x24\n"); + usb_stor_dbg(us, "Read memory fail, OR (buf[0]&0x24)!=0x24\n"); } } - - US_DEBUGP("%s: --->\n", __func__); } static void rts51x_modi_suspend_timer(struct rts51x_chip *chip) { - US_DEBUGP("%s: <---, state:%d\n", __func__, rts51x_get_stat(chip)); + struct us_data *us = chip->us; + + usb_stor_dbg(us, "state:%d\n", rts51x_get_stat(chip)); chip->timer_expires = jiffies + msecs_to_jiffies(1000*ss_delay); mod_timer(&chip->rts51x_suspend_timer, chip->timer_expires); - - US_DEBUGP("%s: --->\n", __func__); } static void rts51x_suspend_timer_fn(unsigned long data) @@ -775,8 +759,6 @@ static void rts51x_suspend_timer_fn(unsigned long data) struct rts51x_chip *chip = (struct rts51x_chip *)data; struct us_data *us = chip->us; - US_DEBUGP("%s: <---\n", __func__); - switch (rts51x_get_stat(chip)) { case RTS51X_STAT_INIT: case RTS51X_STAT_RUN: @@ -784,32 +766,25 @@ static void rts51x_suspend_timer_fn(unsigned long data) break; case RTS51X_STAT_IDLE: case RTS51X_STAT_SS: - US_DEBUGP("%s: RTS51X_STAT_SS, intf->pm_usage_cnt:%d," - "power.usage:%d\n", __func__, - atomic_read(&us->pusb_intf->pm_usage_cnt), - atomic_read(&us->pusb_intf->dev.power.usage_count)); + usb_stor_dbg(us, "RTS51X_STAT_SS, intf->pm_usage_cnt:%d, power.usage:%d\n", + atomic_read(&us->pusb_intf->pm_usage_cnt), + atomic_read(&us->pusb_intf->dev.power.usage_count)); if (atomic_read(&us->pusb_intf->pm_usage_cnt) > 0) { - US_DEBUGP("%s: Ready to enter SS state.\n", - __func__); + usb_stor_dbg(us, "Ready to enter SS state\n"); rts51x_set_stat(chip, RTS51X_STAT_SS); /* ignore mass storage interface's children */ pm_suspend_ignore_children(&us->pusb_intf->dev, true); usb_autopm_put_interface_async(us->pusb_intf); - US_DEBUGP("%s: RTS51X_STAT_SS 01," - "intf->pm_usage_cnt:%d, power.usage:%d\n", - __func__, - atomic_read(&us->pusb_intf->pm_usage_cnt), - atomic_read( - &us->pusb_intf->dev.power.usage_count)); + usb_stor_dbg(us, "RTS51X_STAT_SS 01, intf->pm_usage_cnt:%d, power.usage:%d\n", + atomic_read(&us->pusb_intf->pm_usage_cnt), + atomic_read(&us->pusb_intf->dev.power.usage_count)); } break; default: - US_DEBUGP("%s: Unknonwn state !!!\n", __func__); + usb_stor_dbg(us, "Unknown state !!!\n"); break; } - - US_DEBUGP("%s: --->\n", __func__); } static inline int working_scsi(struct scsi_cmnd *srb) @@ -834,24 +809,21 @@ static void rts51x_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) }; int ret; - US_DEBUGP("%s: <---\n", __func__); - if (working_scsi(srb)) { - US_DEBUGP("%s: working scsi, intf->pm_usage_cnt:%d," - "power.usage:%d\n", __func__, - atomic_read(&us->pusb_intf->pm_usage_cnt), - atomic_read(&us->pusb_intf->dev.power.usage_count)); + usb_stor_dbg(us, "working scsi, intf->pm_usage_cnt:%d, power.usage:%d\n", + atomic_read(&us->pusb_intf->pm_usage_cnt), + atomic_read(&us->pusb_intf->dev.power.usage_count)); if (atomic_read(&us->pusb_intf->pm_usage_cnt) <= 0) { ret = usb_autopm_get_interface(us->pusb_intf); - US_DEBUGP("%s: working scsi, ret=%d\n", __func__, ret); + usb_stor_dbg(us, "working scsi, ret=%d\n", ret); } if (rts51x_get_stat(chip) != RTS51X_STAT_RUN) rts51x_set_stat(chip, RTS51X_STAT_RUN); chip->proto_handler_backup(srb, us); } else { if (rts51x_get_stat(chip) == RTS51X_STAT_SS) { - US_DEBUGP("%s: NOT working scsi\n", __func__); + usb_stor_dbg(us, "NOT working scsi\n"); if ((srb->cmnd[0] == TEST_UNIT_READY) && (chip->pwr_state == US_SUSPEND)) { if (TST_LUN_READY(chip, srb->device->lun)) { @@ -862,8 +834,7 @@ static void rts51x_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) media_not_present, US_SENSE_SIZE); } - US_DEBUGP("%s: TEST_UNIT_READY--->\n", - __func__); + usb_stor_dbg(us, "TEST_UNIT_READY\n"); goto out; } if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { @@ -876,12 +847,11 @@ static void rts51x_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) } else { srb->result = SAM_STAT_GOOD; } - US_DEBUGP("%s: ALLOW_MEDIUM_REMOVAL--->\n", - __func__); + usb_stor_dbg(us, "ALLOW_MEDIUM_REMOVAL\n"); goto out; } } else { - US_DEBUGP("%s: NOT working scsi, not SS\n", __func__); + usb_stor_dbg(us, "NOT working scsi, not SS\n"); chip->proto_handler_backup(srb, us); /* Check whether card is plugged in */ if (srb->cmnd[0] == TEST_UNIT_READY) { @@ -901,11 +871,9 @@ static void rts51x_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) } } out: - US_DEBUGP("%s: state:%d\n", __func__, rts51x_get_stat(chip)); + usb_stor_dbg(us, "state:%d\n", rts51x_get_stat(chip)); if (rts51x_get_stat(chip) == RTS51X_STAT_RUN) rts51x_modi_suspend_timer(chip); - - US_DEBUGP("%s: --->\n", __func__); } static int realtek_cr_autosuspend_setup(struct us_data *us) @@ -923,7 +891,7 @@ static int realtek_cr_autosuspend_setup(struct us_data *us) retval = rts51x_read_status(us, 0, buf, 16, &(chip->status_len)); if (retval != STATUS_SUCCESS) { - US_DEBUGP("Read status fail\n"); + usb_stor_dbg(us, "Read status fail\n"); return -EIO; } status = chip->status; @@ -966,11 +934,13 @@ static int realtek_cr_autosuspend_setup(struct us_data *us) static void realtek_cr_destructor(void *extra) { struct rts51x_chip *chip = (struct rts51x_chip *)extra; - - US_DEBUGP("%s: <---\n", __func__); + struct us_data *us; if (!chip) return; + + us = chip->us; + #ifdef CONFIG_REALTEK_AUTOPM if (ss_en) { del_timer(&chip->rts51x_suspend_timer); @@ -985,8 +955,6 @@ static int realtek_cr_suspend(struct usb_interface *iface, pm_message_t message) { struct us_data *us = usb_get_intfdata(iface); - US_DEBUGP("%s: <---\n", __func__); - /* wait until no command is running */ mutex_lock(&us->dev_mutex); @@ -994,8 +962,6 @@ static int realtek_cr_suspend(struct usb_interface *iface, pm_message_t message) mutex_unlock(&us->dev_mutex); - US_DEBUGP("%s: --->\n", __func__); - return 0; } @@ -1003,13 +969,9 @@ static int realtek_cr_resume(struct usb_interface *iface) { struct us_data *us = usb_get_intfdata(iface); - US_DEBUGP("%s: <---\n", __func__); - fw5895_init(us); config_autodelink_after_power_on(us); - US_DEBUGP("%s: --->\n", __func__); - return 0; } #else @@ -1030,7 +992,7 @@ static int init_realtek_cr(struct us_data *us) us->extra_destructor = realtek_cr_destructor; us->max_lun = chip->max_lun = rts51x_get_max_lun(us); - US_DEBUGP("chip->max_lun = %d\n", chip->max_lun); + usb_stor_dbg(us, "chip->max_lun = %d\n", chip->max_lun); size = (chip->max_lun + 1) * sizeof(struct rts51x_status); chip->status = kzalloc(size, GFP_KERNEL); @@ -1057,7 +1019,7 @@ static int init_realtek_cr(struct us_data *us) } #endif - US_DEBUGP("chip->flag = 0x%x\n", chip->flag); + usb_stor_dbg(us, "chip->flag = 0x%x\n", chip->flag); (void)config_autodelink_after_power_on(us); @@ -1079,7 +1041,7 @@ static int realtek_cr_probe(struct usb_interface *intf, struct us_data *us; int result; - US_DEBUGP("Probe Realtek Card Reader!\n"); + dev_dbg(&intf->dev, "Probe Realtek Card Reader!\n"); result = usb_stor_probe1(&us, intf, id, (id - realtek_cr_ids) + diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 92f35abee92d..4faa982807f2 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -313,8 +313,6 @@ static int queuecommand_lck(struct scsi_cmnd *srb, { struct us_data *us = host_to_us(srb->device->host); - US_DEBUGP("%s called\n", __func__); - /* check for state-transition errors */ if (us->srb != NULL) { printk(KERN_ERR USB_STORAGE "Error in %s: us->srb = %p\n", @@ -324,7 +322,7 @@ static int queuecommand_lck(struct scsi_cmnd *srb, /* fail the command if we are disconnecting */ if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) { - US_DEBUGP("Fail command during disconnect\n"); + usb_stor_dbg(us, "Fail command during disconnect\n"); srb->result = DID_NO_CONNECT << 16; done(srb); return 0; @@ -349,7 +347,7 @@ static int command_abort(struct scsi_cmnd *srb) { struct us_data *us = host_to_us(srb->device->host); - US_DEBUGP("%s called\n", __func__); + usb_stor_dbg(us, "%s called\n", __func__); /* us->srb together with the TIMED_OUT, RESETTING, and ABORTING * bits are protected by the host lock. */ @@ -358,7 +356,7 @@ static int command_abort(struct scsi_cmnd *srb) /* Is this command still active? */ if (us->srb != srb) { scsi_unlock(us_to_host(us)); - US_DEBUGP ("-- nothing to abort\n"); + usb_stor_dbg(us, "-- nothing to abort\n"); return FAILED; } @@ -386,7 +384,7 @@ static int device_reset(struct scsi_cmnd *srb) struct us_data *us = host_to_us(srb->device->host); int result; - US_DEBUGP("%s called\n", __func__); + usb_stor_dbg(us, "%s called\n", __func__); /* lock the device pointers and do the reset */ mutex_lock(&(us->dev_mutex)); @@ -402,7 +400,8 @@ static int bus_reset(struct scsi_cmnd *srb) struct us_data *us = host_to_us(srb->device->host); int result; - US_DEBUGP("%s called\n", __func__); + usb_stor_dbg(us, "%s called\n", __func__); + result = usb_stor_port_reset(us); return result < 0 ? FAILED : SUCCESS; } diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c index 7bd54e0d5120..732027f33200 100644 --- a/drivers/usb/storage/sddr09.c +++ b/drivers/usb/storage/sddr09.c @@ -105,8 +105,6 @@ static struct us_unusual_dev sddr09_unusual_dev_list[] = { #define LSB_of(s) ((s)&0xFF) #define MSB_of(s) ((s)>>8) -/* #define US_DEBUGP printk */ - /* * First some stuff that does not belong here: * data on SmartMedia and other cards, completely @@ -347,7 +345,7 @@ sddr09_test_unit_ready(struct us_data *us) { result = sddr09_send_scsi_command(us, command, 6); - US_DEBUGP("sddr09_test_unit_ready returns %d\n", result); + usb_stor_dbg(us, "sddr09_test_unit_ready returns %d\n", result); return result; } @@ -423,8 +421,8 @@ sddr09_readX(struct us_data *us, int x, unsigned long fromaddress, result = sddr09_send_scsi_command(us, command, 12); if (result) { - US_DEBUGP("Result for send_control in sddr09_read2%d %d\n", - x, result); + usb_stor_dbg(us, "Result for send_control in sddr09_read2%d %d\n", + x, result); return result; } @@ -432,8 +430,8 @@ sddr09_readX(struct us_data *us, int x, unsigned long fromaddress, buf, bulklen, use_sg, NULL); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Result for bulk_transfer in sddr09_read2%d %d\n", - x, result); + usb_stor_dbg(us, "Result for bulk_transfer in sddr09_read2%d %d\n", + x, result); return -EIO; } return 0; @@ -494,8 +492,7 @@ sddr09_read22(struct us_data *us, unsigned long fromaddress, int nr_of_pages, int pageshift, unsigned char *buf, int use_sg) { int bulklen = (nr_of_pages << pageshift) + (nr_of_pages << CONTROL_SHIFT); - US_DEBUGP("sddr09_read22: reading %d pages, %d bytes\n", - nr_of_pages, bulklen); + usb_stor_dbg(us, "reading %d pages, %d bytes\n", nr_of_pages, bulklen); return sddr09_readX(us, 2, fromaddress, nr_of_pages, bulklen, buf, use_sg); } @@ -538,7 +535,7 @@ sddr09_erase(struct us_data *us, unsigned long Eaddress) { unsigned char *command = us->iobuf; int result; - US_DEBUGP("sddr09_erase: erase address %lu\n", Eaddress); + usb_stor_dbg(us, "erase address %lu\n", Eaddress); memset(command, 0, 12); command[0] = 0xEA; @@ -551,8 +548,8 @@ sddr09_erase(struct us_data *us, unsigned long Eaddress) { result = sddr09_send_scsi_command(us, command, 12); if (result) - US_DEBUGP("Result for send_control in sddr09_erase %d\n", - result); + usb_stor_dbg(us, "Result for send_control in sddr09_erase %d\n", + result); return result; } @@ -609,8 +606,8 @@ sddr09_writeX(struct us_data *us, result = sddr09_send_scsi_command(us, command, 12); if (result) { - US_DEBUGP("Result for send_control in sddr09_writeX %d\n", - result); + usb_stor_dbg(us, "Result for send_control in sddr09_writeX %d\n", + result); return result; } @@ -618,8 +615,8 @@ sddr09_writeX(struct us_data *us, buf, bulklen, use_sg, NULL); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Result for bulk_transfer in sddr09_writeX %d\n", - result); + usb_stor_dbg(us, "Result for bulk_transfer in sddr09_writeX %d\n", + result); return -EIO; } return 0; @@ -687,8 +684,8 @@ sddr09_read_sg_test_only(struct us_data *us) { result = sddr09_send_scsi_command(us, command, 4*nsg+3); if (result) { - US_DEBUGP("Result for send_control in sddr09_read_sg %d\n", - result); + usb_stor_dbg(us, "Result for send_control in sddr09_read_sg %d\n", + result); return result; } @@ -700,8 +697,8 @@ sddr09_read_sg_test_only(struct us_data *us) { buf, bulklen, NULL); kfree(buf); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Result for bulk_transfer in sddr09_read_sg %d\n", - result); + usb_stor_dbg(us, "Result for bulk_transfer in sddr09_read_sg %d\n", + result); return -EIO; } @@ -727,7 +724,7 @@ sddr09_read_status(struct us_data *us, unsigned char *status) { unsigned char *data = us->iobuf; int result; - US_DEBUGP("Reading status...\n"); + usb_stor_dbg(us, "Reading status...\n"); memset(command, 0, 12); command[0] = 0xEC; @@ -789,8 +786,8 @@ sddr09_read_data(struct us_data *us, /* Not overflowing capacity? */ if (lba >= maxlba) { - US_DEBUGP("Error: Requested lba %u exceeds " - "maximum %u\n", lba, maxlba); + usb_stor_dbg(us, "Error: Requested lba %u exceeds maximum %u\n", + lba, maxlba); result = -EIO; break; } @@ -800,8 +797,8 @@ sddr09_read_data(struct us_data *us, if (pba == UNDEF) { /* this lba was never written */ - US_DEBUGP("Read %d zero pages (LBA %d) page %d\n", - pages, lba, page); + usb_stor_dbg(us, "Read %d zero pages (LBA %d) page %d\n", + pages, lba, page); /* This is not really an error. It just means that the block has never been written. @@ -811,9 +808,8 @@ sddr09_read_data(struct us_data *us, memset(buffer, 0, len); } else { - US_DEBUGP("Read %d pages, from PBA %d" - " (LBA %d) page %d\n", - pages, pba, lba, page); + usb_stor_dbg(us, "Read %d pages, from PBA %d (LBA %d) page %d\n", + pages, pba, lba, page); address = ((pba << info->blockshift) + page) << info->pageshift; @@ -916,14 +912,14 @@ sddr09_write_lba(struct us_data *us, unsigned int lba, cptr = bptr + info->pagesize; nand_compute_ecc(bptr, ecc); if (!nand_compare_ecc(cptr+13, ecc)) { - US_DEBUGP("Warning: bad ecc in page %d- of pba %d\n", - i, pba); + usb_stor_dbg(us, "Warning: bad ecc in page %d- of pba %d\n", + i, pba); nand_store_ecc(cptr+13, ecc); } nand_compute_ecc(bptr+(info->pagesize / 2), ecc); if (!nand_compare_ecc(cptr+8, ecc)) { - US_DEBUGP("Warning: bad ecc in page %d+ of pba %d\n", - i, pba); + usb_stor_dbg(us, "Warning: bad ecc in page %d+ of pba %d\n", + i, pba); nand_store_ecc(cptr+8, ecc); } cptr[6] = cptr[11] = MSB_of(lbap); @@ -943,22 +939,21 @@ sddr09_write_lba(struct us_data *us, unsigned int lba, nand_store_ecc(cptr+8, ecc); } - US_DEBUGP("Rewrite PBA %d (LBA %d)\n", pba, lba); + usb_stor_dbg(us, "Rewrite PBA %d (LBA %d)\n", pba, lba); result = sddr09_write_inplace(us, address>>1, info->blocksize, info->pageshift, blockbuffer, 0); - US_DEBUGP("sddr09_write_inplace returns %d\n", result); + usb_stor_dbg(us, "sddr09_write_inplace returns %d\n", result); #if 0 { unsigned char status = 0; int result2 = sddr09_read_status(us, &status); if (result2) - US_DEBUGP("sddr09_write_inplace: cannot read status\n"); + usb_stor_dbg(us, "cannot read status\n"); else if (status != 0xc0) - US_DEBUGP("sddr09_write_inplace: status after write: 0x%x\n", - status); + usb_stor_dbg(us, "status after write: 0x%x\n", status); } #endif @@ -1031,8 +1026,8 @@ sddr09_write_data(struct us_data *us, /* Not overflowing capacity? */ if (lba >= maxlba) { - US_DEBUGP("Error: Requested lba %u exceeds " - "maximum %u\n", lba, maxlba); + usb_stor_dbg(us, "Error: Requested lba %u exceeds maximum %u\n", + lba, maxlba); result = -EIO; break; } @@ -1064,8 +1059,8 @@ sddr09_read_control(struct us_data *us, unsigned char *content, int use_sg) { - US_DEBUGP("Read control address %lu, blocks %d\n", - address, blocks); + usb_stor_dbg(us, "Read control address %lu, blocks %d\n", + address, blocks); return sddr09_read21(us, address, blocks, CONTROL_SHIFT, content, use_sg); @@ -1111,21 +1106,21 @@ sddr09_get_wp(struct us_data *us, struct sddr09_card_info *info) { result = sddr09_read_status(us, &status); if (result) { - US_DEBUGP("sddr09_get_wp: read_status fails\n"); + usb_stor_dbg(us, "read_status fails\n"); return result; } - US_DEBUGP("sddr09_get_wp: status 0x%02X", status); + usb_stor_dbg(us, "status 0x%02X", status); if ((status & 0x80) == 0) { info->flags |= SDDR09_WP; /* write protected */ - US_DEBUGP(" WP"); + US_DEBUGPX(" WP"); } if (status & 0x40) - US_DEBUGP(" Ready"); + US_DEBUGPX(" Ready"); if (status & LUNBITS) - US_DEBUGP(" Suspended"); + US_DEBUGPX(" Suspended"); if (status & 0x1) - US_DEBUGP(" Error"); - US_DEBUGP("\n"); + US_DEBUGPX(" Error"); + US_DEBUGPX("\n"); return 0; } @@ -1154,12 +1149,12 @@ sddr09_get_cardinfo(struct us_data *us, unsigned char flags) { char blurbtxt[256]; int result; - US_DEBUGP("Reading capacity...\n"); + usb_stor_dbg(us, "Reading capacity...\n"); result = sddr09_read_deviceID(us, deviceID); if (result) { - US_DEBUGP("Result of read_deviceID is %d\n", result); + usb_stor_dbg(us, "Result of read_deviceID is %d\n", result); printk(KERN_WARNING "sddr09: could not read card info\n"); return NULL; } @@ -1392,7 +1387,7 @@ sddr09_read_map(struct us_data *us) { lbact += ct; } info->lbact = lbact; - US_DEBUGP("Found %d LBA's\n", lbact); + usb_stor_dbg(us, "Found %d LBA's\n", lbact); result = 0; done: @@ -1423,18 +1418,18 @@ sddr09_common_init(struct us_data *us) { /* set the configuration -- STALL is an acceptable response here */ if (us->pusb_dev->actconfig->desc.bConfigurationValue != 1) { - US_DEBUGP("active config #%d != 1 ??\n", us->pusb_dev - ->actconfig->desc.bConfigurationValue); + usb_stor_dbg(us, "active config #%d != 1 ??\n", + us->pusb_dev->actconfig->desc.bConfigurationValue); return -EINVAL; } result = usb_reset_configuration(us->pusb_dev); - US_DEBUGP("Result of usb_reset_configuration is %d\n", result); + usb_stor_dbg(us, "Result of usb_reset_configuration is %d\n", result); if (result == -EPIPE) { - US_DEBUGP("-- stall on control interface\n"); + usb_stor_dbg(us, "-- stall on control interface\n"); } else if (result != 0) { /* it's not a stall, but another error -- time to bail */ - US_DEBUGP("-- Unknown error. Rejecting device\n"); + usb_stor_dbg(us, "-- Unknown error. Rejecting device\n"); return -EINVAL; } @@ -1464,20 +1459,20 @@ usb_stor_sddr09_dpcm_init(struct us_data *us) { result = sddr09_send_command(us, 0x01, USB_DIR_IN, data, 2); if (result) { - US_DEBUGP("sddr09_init: send_command fails\n"); + usb_stor_dbg(us, "send_command fails\n"); return result; } - US_DEBUGP("SDDR09init: %02X %02X\n", data[0], data[1]); + usb_stor_dbg(us, "%02X %02X\n", data[0], data[1]); // get 07 02 result = sddr09_send_command(us, 0x08, USB_DIR_IN, data, 2); if (result) { - US_DEBUGP("sddr09_init: 2nd send_command fails\n"); + usb_stor_dbg(us, "2nd send_command fails\n"); return result; } - US_DEBUGP("SDDR09init: %02X %02X\n", data[0], data[1]); + usb_stor_dbg(us, "%02X %02X\n", data[0], data[1]); // get 07 00 result = sddr09_request_sense(us, data, 18); @@ -1507,7 +1502,7 @@ static int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us) { int ret; - US_DEBUGP("dpcm_transport: LUN=%d\n", srb->device->lun); + usb_stor_dbg(us, "LUN=%d\n", srb->device->lun); switch (srb->device->lun) { case 0: @@ -1533,8 +1528,7 @@ static int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us) break; default: - US_DEBUGP("dpcm_transport: Invalid LUN %d\n", - srb->device->lun); + usb_stor_dbg(us, "Invalid LUN %d\n", srb->device->lun); ret = USB_STOR_TRANSPORT_ERROR; break; } @@ -1640,8 +1634,8 @@ static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) or for all pages. */ /* %% We should check DBD %% */ if (modepage == 0x01 || modepage == 0x3F) { - US_DEBUGP("SDDR09: Dummy up request for " - "mode page 0x%x\n", modepage); + usb_stor_dbg(us, "Dummy up request for mode page 0x%x\n", + modepage); memcpy(ptr, mode_page_01, sizeof(mode_page_01)); ((__be16*)ptr)[0] = cpu_to_be16(sizeof(mode_page_01) - 2); @@ -1667,8 +1661,8 @@ static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) page |= short_pack(srb->cmnd[5], srb->cmnd[4]); pages = short_pack(srb->cmnd[8], srb->cmnd[7]); - US_DEBUGP("READ_10: read page %d pagect %d\n", - page, pages); + usb_stor_dbg(us, "READ_10: read page %d pagect %d\n", + page, pages); result = sddr09_read_data(us, page, pages); return (result == 0 ? USB_STOR_TRANSPORT_GOOD : @@ -1682,8 +1676,8 @@ static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) page |= short_pack(srb->cmnd[5], srb->cmnd[4]); pages = short_pack(srb->cmnd[8], srb->cmnd[7]); - US_DEBUGP("WRITE_10: write page %d pagect %d\n", - page, pages); + usb_stor_dbg(us, "WRITE_10: write page %d pagect %d\n", + page, pages); result = sddr09_write_data(us, page, pages); return (result == 0 ? USB_STOR_TRANSPORT_GOOD : @@ -1710,12 +1704,12 @@ static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) for (i=0; i<12; i++) sprintf(ptr+strlen(ptr), "%02X ", srb->cmnd[i]); - US_DEBUGP("SDDR09: Send control for command %s\n", ptr); + usb_stor_dbg(us, "Send control for command %s\n", ptr); result = sddr09_send_scsi_command(us, srb->cmnd, 12); if (result) { - US_DEBUGP("sddr09_transport: sddr09_send_scsi_command " - "returns %d\n", result); + usb_stor_dbg(us, "sddr09_send_scsi_command returns %d\n", + result); return USB_STOR_TRANSPORT_ERROR; } @@ -1727,10 +1721,10 @@ static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) unsigned int pipe = (srb->sc_data_direction == DMA_TO_DEVICE) ? us->send_bulk_pipe : us->recv_bulk_pipe; - US_DEBUGP("SDDR09: %s %d bytes\n", - (srb->sc_data_direction == DMA_TO_DEVICE) ? - "sending" : "receiving", - scsi_bufflen(srb)); + usb_stor_dbg(us, "%s %d bytes\n", + (srb->sc_data_direction == DMA_TO_DEVICE) ? + "sending" : "receiving", + scsi_bufflen(srb)); result = usb_stor_bulk_srb(us, pipe, srb); diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c index d278c5a99b7a..aacedef9667c 100644 --- a/drivers/usb/storage/sddr55.c +++ b/drivers/usb/storage/sddr55.c @@ -145,8 +145,7 @@ static int sddr55_status(struct us_data *us) result = sddr55_bulk_transport(us, DMA_TO_DEVICE, command, 8); - US_DEBUGP("Result for send_command in status %d\n", - result); + usb_stor_dbg(us, "Result for send_command in status %d\n", result); if (result != USB_STOR_XFER_GOOD) { set_sense_info (4, 0, 0); /* hardware error */ @@ -236,9 +235,8 @@ static int sddr55_read_data(struct us_data *us, info->blocksize - page); len = pages << info->pageshift; - US_DEBUGP("Read %02X pages, from PBA %04X" - " (LBA %04X) page %02X\n", - pages, pba, lba, page); + usb_stor_dbg(us, "Read %02X pages, from PBA %04X (LBA %04X) page %02X\n", + pages, pba, lba, page); if (pba == NOT_ALLOCATED) { /* no pba for this lba, fill with zeroes */ @@ -261,8 +259,8 @@ static int sddr55_read_data(struct us_data *us, result = sddr55_bulk_transport(us, DMA_TO_DEVICE, command, 8); - US_DEBUGP("Result for send_command in read_data %d\n", - result); + usb_stor_dbg(us, "Result for send_command in read_data %d\n", + result); if (result != USB_STOR_XFER_GOOD) { result = USB_STOR_TRANSPORT_ERROR; @@ -368,9 +366,8 @@ static int sddr55_write_data(struct us_data *us, usb_stor_access_xfer_buf(buffer, len, us->srb, &sg, &offset, FROM_XFER_BUF); - US_DEBUGP("Write %02X pages, to PBA %04X" - " (LBA %04X) page %02X\n", - pages, pba, lba, page); + usb_stor_dbg(us, "Write %02X pages, to PBA %04X (LBA %04X) page %02X\n", + pages, pba, lba, page); command[4] = 0; @@ -384,7 +381,7 @@ static int sddr55_write_data(struct us_data *us, /* set pba to first block in zone lba is in */ pba = (lba / 1000) * 1024; - US_DEBUGP("No PBA for LBA %04X\n",lba); + usb_stor_dbg(us, "No PBA for LBA %04X\n", lba); if (max_pba > 1024) max_pba = 1024; @@ -407,14 +404,15 @@ static int sddr55_write_data(struct us_data *us, if (pba == -1) { /* oh dear */ - US_DEBUGP("Couldn't find unallocated block\n"); + usb_stor_dbg(us, "Couldn't find unallocated block\n"); set_sense_info (3, 0x31, 0); /* medium error */ result = USB_STOR_TRANSPORT_FAILED; goto leave; } - US_DEBUGP("Allocating PBA %04X for LBA %04X\n", pba, lba); + usb_stor_dbg(us, "Allocating PBA %04X for LBA %04X\n", + pba, lba); /* set writing to unallocated block flag */ command[4] = 0x40; @@ -439,8 +437,8 @@ static int sddr55_write_data(struct us_data *us, DMA_TO_DEVICE, command, 8); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Result for send_command in write_data %d\n", - result); + usb_stor_dbg(us, "Result for send_command in write_data %d\n", + result); /* set_sense_info is superfluous here? */ set_sense_info (3, 0x3, 0);/* peripheral write error */ @@ -453,8 +451,8 @@ static int sddr55_write_data(struct us_data *us, DMA_TO_DEVICE, buffer, len); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Result for send_data in write_data %d\n", - result); + usb_stor_dbg(us, "Result for send_data in write_data %d\n", + result); /* set_sense_info is superfluous here? */ set_sense_info (3, 0x3, 0);/* peripheral write error */ @@ -466,8 +464,8 @@ static int sddr55_write_data(struct us_data *us, result = sddr55_bulk_transport(us, DMA_FROM_DEVICE, status, 6); if (result != USB_STOR_XFER_GOOD) { - US_DEBUGP("Result for get_status in write_data %d\n", - result); + usb_stor_dbg(us, "Result for get_status in write_data %d\n", + result); /* set_sense_info is superfluous here? */ set_sense_info (3, 0x3, 0);/* peripheral write error */ @@ -487,8 +485,8 @@ static int sddr55_write_data(struct us_data *us, goto leave; } - US_DEBUGP("Updating maps for LBA %04X: old PBA %04X, new PBA %04X\n", - lba, pba, new_pba); + usb_stor_dbg(us, "Updating maps for LBA %04X: old PBA %04X, new PBA %04X\n", + lba, pba, new_pba); /* update the lba<->pba maps, note new_pba might be the same as pba */ info->lba_to_pba[lba] = new_pba; @@ -531,8 +529,8 @@ static int sddr55_read_deviceID(struct us_data *us, command[7] = 0x84; result = sddr55_bulk_transport(us, DMA_TO_DEVICE, command, 8); - US_DEBUGP("Result of send_control for device ID is %d\n", - result); + usb_stor_dbg(us, "Result of send_control for device ID is %d\n", + result); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; @@ -568,20 +566,19 @@ static unsigned long sddr55_get_capacity(struct us_data *us) { int result; struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra; - US_DEBUGP("Reading capacity...\n"); + usb_stor_dbg(us, "Reading capacity...\n"); result = sddr55_read_deviceID(us, &manufacturerID, &deviceID); - US_DEBUGP("Result of read_deviceID is %d\n", - result); + usb_stor_dbg(us, "Result of read_deviceID is %d\n", result); if (result != USB_STOR_XFER_GOOD) return 0; - US_DEBUGP("Device ID = %02X\n", deviceID); - US_DEBUGP("Manuf ID = %02X\n", manufacturerID); + usb_stor_dbg(us, "Device ID = %02X\n", deviceID); + usb_stor_dbg(us, "Manuf ID = %02X\n", manufacturerID); info->pageshift = 9; info->smallpageshift = 0; @@ -753,7 +750,7 @@ static int sddr55_read_map(struct us_data *us) { } if (lba<0x10 || (lba>=0x3E0 && lba<0x3EF)) - US_DEBUGP("LBA %04X <-> PBA %04X\n", lba, i); + usb_stor_dbg(us, "LBA %04X <-> PBA %04X\n", lba, i); info->lba_to_pba[lba + zone * 1000] = i; } @@ -808,7 +805,10 @@ static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us) info = (struct sddr55_card_info *)(us->extra); if (srb->cmnd[0] == REQUEST_SENSE) { - US_DEBUGP("SDDR55: request sense %02x/%02x/%02x\n", info->sense_data[2], info->sense_data[12], info->sense_data[13]); + usb_stor_dbg(us, "request sense %02x/%02x/%02x\n", + info->sense_data[2], + info->sense_data[12], + info->sense_data[13]); memcpy (ptr, info->sense_data, sizeof info->sense_data); ptr[0] = 0x70; @@ -892,13 +892,11 @@ static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us) usb_stor_set_xfer_buf(ptr, sizeof(mode_page_01), srb); if ( (srb->cmnd[2] & 0x3F) == 0x01 ) { - US_DEBUGP( - "SDDR55: Dummy up request for mode page 1\n"); + usb_stor_dbg(us, "Dummy up request for mode page 1\n"); return USB_STOR_TRANSPORT_GOOD; } else if ( (srb->cmnd[2] & 0x3F) == 0x3F ) { - US_DEBUGP( - "SDDR55: Dummy up request for all mode pages\n"); + usb_stor_dbg(us, "Dummy up request for all mode pages\n"); return USB_STOR_TRANSPORT_GOOD; } @@ -908,10 +906,8 @@ static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us) if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { - US_DEBUGP( - "SDDR55: %s medium removal. Not that I can do" - " anything about it...\n", - (srb->cmnd[4]&0x03) ? "Prevent" : "Allow"); + usb_stor_dbg(us, "%s medium removal. Not that I can do anything about it...\n", + (srb->cmnd[4]&0x03) ? "Prevent" : "Allow"); return USB_STOR_TRANSPORT_GOOD; @@ -935,8 +931,8 @@ static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us) if (lba >= info->max_log_blks) { - US_DEBUGP("Error: Requested LBA %04X exceeds maximum " - "block %04X\n", lba, info->max_log_blks-1); + usb_stor_dbg(us, "Error: Requested LBA %04X exceeds maximum block %04X\n", + lba, info->max_log_blks - 1); set_sense_info (5, 0x24, 0); /* invalid field in command */ @@ -946,15 +942,13 @@ static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us) pba = info->lba_to_pba[lba]; if (srb->cmnd[0] == WRITE_10) { - US_DEBUGP("WRITE_10: write block %04X (LBA %04X) page %01X" - " pages %d\n", - pba, lba, page, pages); + usb_stor_dbg(us, "WRITE_10: write block %04X (LBA %04X) page %01X pages %d\n", + pba, lba, page, pages); return sddr55_write_data(us, lba, page, pages); } else { - US_DEBUGP("READ_10: read block %04X (LBA %04X) page %01X" - " pages %d\n", - pba, lba, page, pages); + usb_stor_dbg(us, "READ_10: read block %04X (LBA %04X) page %01X pages %d\n", + pba, lba, page, pages); return sddr55_read_data(us, lba, page, pages); } diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index daf2fc58ae02..4ef2a80728f7 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -271,7 +271,7 @@ static int usbat_bulk_read(struct us_data *us, if (len == 0) return USB_STOR_XFER_GOOD; - US_DEBUGP("usbat_bulk_read: len = %d\n", len); + usb_stor_dbg(us, "len = %d\n", len); return usb_stor_bulk_transfer_sg(us, us->recv_bulk_pipe, buf, len, use_sg, NULL); } @@ -286,7 +286,7 @@ static int usbat_bulk_write(struct us_data *us, if (len == 0) return USB_STOR_XFER_GOOD; - US_DEBUGP("usbat_bulk_write: len = %d\n", len); + usb_stor_dbg(us, "len = %d\n", len); return usb_stor_bulk_transfer_sg(us, us->send_bulk_pipe, buf, len, use_sg, NULL); } @@ -312,7 +312,7 @@ static int usbat_get_status(struct us_data *us, unsigned char *status) int rc; rc = usbat_read(us, USBAT_ATA, USBAT_ATA_STATUS, status); - US_DEBUGP("usbat_get_status: 0x%02X\n", (unsigned short) (*status)); + usb_stor_dbg(us, "0x%02X\n", *status); return rc; } @@ -425,7 +425,7 @@ static int usbat_wait_not_busy(struct us_data *us, int minutes) return USB_STOR_TRANSPORT_FAILED; if ((*status & 0x80)==0x00) { /* not busy */ - US_DEBUGP("Waited not busy for %d steps\n", i); + usb_stor_dbg(us, "Waited not busy for %d steps\n", i); return USB_STOR_TRANSPORT_GOOD; } @@ -439,8 +439,8 @@ static int usbat_wait_not_busy(struct us_data *us, int minutes) msleep(1000); /* X minutes */ } - US_DEBUGP("Waited not busy for %d minutes, timing out.\n", - minutes); + usb_stor_dbg(us, "Waited not busy for %d minutes, timing out\n", + minutes); return USB_STOR_TRANSPORT_FAILED; } @@ -657,8 +657,9 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us, if (*status & 0x20) /* device fault */ return USB_STOR_TRANSPORT_FAILED; - US_DEBUGP("Redoing %s\n", - direction==DMA_TO_DEVICE ? "write" : "read"); + usb_stor_dbg(us, "Redoing %s\n", + direction == DMA_TO_DEVICE + ? "write" : "read"); } else if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; @@ -667,8 +668,8 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us, } - US_DEBUGP("Bummer! %s bulk data 20 times failed.\n", - direction==DMA_TO_DEVICE ? "Writing" : "Reading"); + usb_stor_dbg(us, "Bummer! %s bulk data 20 times failed\n", + direction == DMA_TO_DEVICE ? "Writing" : "Reading"); return USB_STOR_TRANSPORT_FAILED; } @@ -827,7 +828,7 @@ static int usbat_read_user_io(struct us_data *us, unsigned char *data_flags) data_flags, USBAT_UIO_READ); - US_DEBUGP("usbat_read_user_io: UIO register reads %02X\n", (unsigned short) (*data_flags)); + usb_stor_dbg(us, "UIO register reads %02X\n", *data_flags); return result; } @@ -900,10 +901,11 @@ static int usbat_device_enable_cdt(struct us_data *us) /* * Determine if media is present. */ -static int usbat_flash_check_media_present(unsigned char *uio) +static int usbat_flash_check_media_present(struct us_data *us, + unsigned char *uio) { if (*uio & USBAT_UIO_UI0) { - US_DEBUGP("usbat_flash_check_media_present: no media detected\n"); + usb_stor_dbg(us, "no media detected\n"); return USBAT_FLASH_MEDIA_NONE; } @@ -913,10 +915,11 @@ static int usbat_flash_check_media_present(unsigned char *uio) /* * Determine if media has changed since last operation */ -static int usbat_flash_check_media_changed(unsigned char *uio) +static int usbat_flash_check_media_changed(struct us_data *us, + unsigned char *uio) { if (*uio & USBAT_UIO_0) { - US_DEBUGP("usbat_flash_check_media_changed: media change detected\n"); + usb_stor_dbg(us, "media change detected\n"); return USBAT_FLASH_MEDIA_CHANGED; } @@ -937,7 +940,7 @@ static int usbat_flash_check_media(struct us_data *us, return USB_STOR_TRANSPORT_ERROR; /* Check for media existence */ - rc = usbat_flash_check_media_present(uio); + rc = usbat_flash_check_media_present(us, uio); if (rc == USBAT_FLASH_MEDIA_NONE) { info->sense_key = 0x02; info->sense_asc = 0x3A; @@ -946,7 +949,7 @@ static int usbat_flash_check_media(struct us_data *us, } /* Check for media change */ - rc = usbat_flash_check_media_changed(uio); + rc = usbat_flash_check_media_changed(us, uio); if (rc == USBAT_FLASH_MEDIA_CHANGED) { /* Reset and re-enable card detect */ @@ -1008,11 +1011,11 @@ static int usbat_identify_device(struct us_data *us, /* Check for error bit, or if the command 'fell through' */ if (status == 0xA1 || !(status & 0x01)) { /* Device is HP 8200 */ - US_DEBUGP("usbat_identify_device: Detected HP8200 CDRW\n"); + usb_stor_dbg(us, "Detected HP8200 CDRW\n"); info->devicetype = USBAT_DEV_HP8200; } else { /* Device is a CompactFlash reader/writer */ - US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n"); + usb_stor_dbg(us, "Detected Flash reader/writer\n"); info->devicetype = USBAT_DEV_FLASH; } @@ -1075,7 +1078,7 @@ static int usbat_flash_get_sector_count(struct us_data *us, /* ATA command : IDENTIFY DEVICE */ rc = usbat_multiple_write(us, registers, command, 3); if (rc != USB_STOR_XFER_GOOD) { - US_DEBUGP("usbat_flash_get_sector_count: Gah! identify_device failed\n"); + usb_stor_dbg(us, "Gah! identify_device failed\n"); rc = USB_STOR_TRANSPORT_ERROR; goto leave; } @@ -1178,7 +1181,7 @@ static int usbat_flash_read_data(struct us_data *us, if (result != USB_STOR_TRANSPORT_GOOD) goto leave; - US_DEBUGP("usbat_flash_read_data: %d bytes\n", len); + usb_stor_dbg(us, "%d bytes\n", len); /* Store the data in the transfer buffer */ usb_stor_access_xfer_buf(buffer, len, us->srb, @@ -1301,8 +1304,7 @@ static int usbat_hp8200e_handle_read10(struct us_data *us, unsigned int sg_offset = 0; struct scatterlist *sg = NULL; - US_DEBUGP("handle_read10: transfersize %d\n", - srb->transfersize); + usb_stor_dbg(us, "transfersize %d\n", srb->transfersize); if (scsi_bufflen(srb) < 0x10000) { @@ -1329,14 +1331,14 @@ static int usbat_hp8200e_handle_read10(struct us_data *us, len = short_pack(data[7+9], data[7+8]); len <<= 16; len |= data[7+7]; - US_DEBUGP("handle_read10: GPCMD_READ_CD: len %d\n", len); + usb_stor_dbg(us, "GPCMD_READ_CD: len %d\n", len); srb->transfersize = scsi_bufflen(srb)/len; } if (!srb->transfersize) { srb->transfersize = 2048; /* A guess */ - US_DEBUGP("handle_read10: transfersize 0, forcing %d\n", - srb->transfersize); + usb_stor_dbg(us, "transfersize 0, forcing %d\n", + srb->transfersize); } /* @@ -1346,7 +1348,7 @@ static int usbat_hp8200e_handle_read10(struct us_data *us, */ len = (65535/srb->transfersize) * srb->transfersize; - US_DEBUGP("Max read is %d bytes\n", len); + usb_stor_dbg(us, "Max read is %d bytes\n", len); len = min(len, scsi_bufflen(srb)); buffer = kmalloc(len, GFP_NOIO); if (buffer == NULL) /* bloody hell! */ @@ -1460,10 +1462,9 @@ static int init_usbat(struct us_data *us, int devicetype) unsigned char *status = us->iobuf; us->extra = kzalloc(sizeof(struct usbat_info), GFP_NOIO); - if (!us->extra) { - US_DEBUGP("init_usbat: Gah! Can't allocate storage for usbat info struct!\n"); + if (!us->extra) return 1; - } + info = (struct usbat_info *) (us->extra); /* Enable peripheral control signals */ @@ -1473,7 +1474,7 @@ static int init_usbat(struct us_data *us, int devicetype) if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - US_DEBUGP("INIT 1\n"); + usb_stor_dbg(us, "INIT 1\n"); msleep(2000); @@ -1481,7 +1482,7 @@ static int init_usbat(struct us_data *us, int devicetype) if (rc != USB_STOR_TRANSPORT_GOOD) return rc; - US_DEBUGP("INIT 2\n"); + usb_stor_dbg(us, "INIT 2\n"); rc = usbat_read_user_io(us, status); if (rc != USB_STOR_XFER_GOOD) @@ -1491,32 +1492,32 @@ static int init_usbat(struct us_data *us, int devicetype) if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - US_DEBUGP("INIT 3\n"); + usb_stor_dbg(us, "INIT 3\n"); rc = usbat_select_and_test_registers(us); if (rc != USB_STOR_TRANSPORT_GOOD) return rc; - US_DEBUGP("INIT 4\n"); + usb_stor_dbg(us, "INIT 4\n"); rc = usbat_read_user_io(us, status); if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - US_DEBUGP("INIT 5\n"); + usb_stor_dbg(us, "INIT 5\n"); /* Enable peripheral control signals and card detect */ rc = usbat_device_enable_cdt(us); if (rc != USB_STOR_TRANSPORT_GOOD) return rc; - US_DEBUGP("INIT 6\n"); + usb_stor_dbg(us, "INIT 6\n"); rc = usbat_read_user_io(us, status); if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - US_DEBUGP("INIT 7\n"); + usb_stor_dbg(us, "INIT 7\n"); msleep(1400); @@ -1524,19 +1525,19 @@ static int init_usbat(struct us_data *us, int devicetype) if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - US_DEBUGP("INIT 8\n"); + usb_stor_dbg(us, "INIT 8\n"); rc = usbat_select_and_test_registers(us); if (rc != USB_STOR_TRANSPORT_GOOD) return rc; - US_DEBUGP("INIT 9\n"); + usb_stor_dbg(us, "INIT 9\n"); /* At this point, we need to detect which device we are using */ if (usbat_set_transport(us, info, devicetype)) return USB_STOR_TRANSPORT_ERROR; - US_DEBUGP("INIT 10\n"); + usb_stor_dbg(us, "INIT 10\n"); if (usbat_get_device_type(us) == USBAT_DEV_FLASH) { subcountH = 0x02; @@ -1547,7 +1548,7 @@ static int init_usbat(struct us_data *us, int devicetype) if (rc != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - US_DEBUGP("INIT 11\n"); + usb_stor_dbg(us, "INIT 11\n"); return USB_STOR_TRANSPORT_GOOD; } @@ -1592,7 +1593,7 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) } result = usbat_get_status(us, status); - US_DEBUGP("Status = %02X\n", *status); + usb_stor_dbg(us, "Status = %02X\n", *status); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; if (srb->cmnd[0] == TEST_UNIT_READY) @@ -1610,7 +1611,7 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) if (result == USB_STOR_TRANSPORT_GOOD) { transferred += len; - US_DEBUGP("Wrote %08X bytes\n", transferred); + usb_stor_dbg(us, "Wrote %08X bytes\n", transferred); } return result; @@ -1623,8 +1624,8 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) } if (len > 0xFFFF) { - US_DEBUGP("Error: len = %08X... what do I do now?\n", - len); + usb_stor_dbg(us, "Error: len = %08X... what do I do now?\n", + len); return USB_STOR_TRANSPORT_ERROR; } @@ -1693,7 +1694,7 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) }; if (srb->cmnd[0] == INQUIRY) { - US_DEBUGP("usbat_flash_transport: INQUIRY. Returning bogus response.\n"); + usb_stor_dbg(us, "INQUIRY - Returning bogus response\n"); memcpy(ptr, inquiry_response, sizeof(inquiry_response)); fill_inquiry_response(us, ptr, 36); return USB_STOR_TRANSPORT_GOOD; @@ -1710,8 +1711,8 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) /* hard coded 512 byte sectors as per ATA spec */ info->ssize = 0x200; - US_DEBUGP("usbat_flash_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n", - info->sectors, info->ssize); + usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n", + info->sectors, info->ssize); /* * build the reply @@ -1726,7 +1727,7 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) } if (srb->cmnd[0] == MODE_SELECT_10) { - US_DEBUGP("usbat_flash_transport: Gah! MODE_SELECT_10.\n"); + usb_stor_dbg(us, "Gah! MODE_SELECT_10\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -1736,7 +1737,8 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); - US_DEBUGP("usbat_flash_transport: READ_10: read block 0x%04lx count %ld\n", block, blocks); + usb_stor_dbg(us, "READ_10: read block 0x%04lx count %ld\n", + block, blocks); return usbat_flash_read_data(us, info, block, blocks); } @@ -1750,7 +1752,8 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); - US_DEBUGP("usbat_flash_transport: READ_12: read block 0x%04lx count %ld\n", block, blocks); + usb_stor_dbg(us, "READ_12: read block 0x%04lx count %ld\n", + block, blocks); return usbat_flash_read_data(us, info, block, blocks); } @@ -1760,7 +1763,8 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); - US_DEBUGP("usbat_flash_transport: WRITE_10: write block 0x%04lx count %ld\n", block, blocks); + usb_stor_dbg(us, "WRITE_10: write block 0x%04lx count %ld\n", + block, blocks); return usbat_flash_write_data(us, info, block, blocks); } @@ -1774,13 +1778,14 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); - US_DEBUGP("usbat_flash_transport: WRITE_12: write block 0x%04lx count %ld\n", block, blocks); + usb_stor_dbg(us, "WRITE_12: write block 0x%04lx count %ld\n", + block, blocks); return usbat_flash_write_data(us, info, block, blocks); } if (srb->cmnd[0] == TEST_UNIT_READY) { - US_DEBUGP("usbat_flash_transport: TEST_UNIT_READY.\n"); + usb_stor_dbg(us, "TEST_UNIT_READY\n"); rc = usbat_flash_check_media(us, info); if (rc != USB_STOR_TRANSPORT_GOOD) @@ -1790,7 +1795,7 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) } if (srb->cmnd[0] == REQUEST_SENSE) { - US_DEBUGP("usbat_flash_transport: REQUEST_SENSE.\n"); + usb_stor_dbg(us, "REQUEST_SENSE\n"); memset(ptr, 0, 18); ptr[0] = 0xF0; @@ -1811,8 +1816,8 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) return USB_STOR_TRANSPORT_GOOD; } - US_DEBUGP("usbat_flash_transport: Gah! Unknown command: %d (0x%x)\n", - srb->cmnd[0], srb->cmnd[0]); + usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n", + srb->cmnd[0], srb->cmnd[0]); info->sense_key = 0x05; info->sense_asc = 0x20; info->sense_ascq = 0x00; diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c index 17e36952bced..2ea657be14c8 100644 --- a/drivers/usb/storage/sierra_ms.c +++ b/drivers/usb/storage/sierra_ms.c @@ -47,7 +47,7 @@ static bool containsFullLinuxPackage(struct swoc_info *swocInfo) static int sierra_set_ms_mode(struct usb_device *udev, __u16 eSWocMode) { int result; - US_DEBUGP("SWIMS: %s", "DEVICE MODE SWITCH\n"); + dev_dbg(&udev->dev, "SWIMS: %s", "DEVICE MODE SWITCH\n"); result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), SWIMS_USB_REQUEST_SetSwocMode, /* __u8 request */ USB_TYPE_VENDOR | USB_DIR_OUT, /* __u8 request type */ @@ -65,7 +65,7 @@ static int sierra_get_swoc_info(struct usb_device *udev, { int result; - US_DEBUGP("SWIMS: Attempting to get TRU-Install info.\n"); + dev_dbg(&udev->dev, "SWIMS: Attempting to get TRU-Install info\n"); result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), SWIMS_USB_REQUEST_GetSwocInfo, /* __u8 request */ @@ -81,11 +81,11 @@ static int sierra_get_swoc_info(struct usb_device *udev, return result; } -static void debug_swoc(struct swoc_info *swocInfo) +static void debug_swoc(const struct device *dev, struct swoc_info *swocInfo) { - US_DEBUGP("SWIMS: SWoC Rev: %02d \n", swocInfo->rev); - US_DEBUGP("SWIMS: Linux SKU: %04X \n", swocInfo->LinuxSKU); - US_DEBUGP("SWIMS: Linux Version: %04X \n", swocInfo->LinuxVer); + dev_dbg(dev, "SWIMS: SWoC Rev: %02d\n", swocInfo->rev); + dev_dbg(dev, "SWIMS: Linux SKU: %04X\n", swocInfo->LinuxSKU); + dev_dbg(dev, "SWIMS: Linux Version: %04X\n", swocInfo->LinuxVer); } @@ -101,18 +101,17 @@ static ssize_t show_truinst(struct device *dev, struct device_attribute *attr, } else { swocInfo = kmalloc(sizeof(struct swoc_info), GFP_KERNEL); if (!swocInfo) { - US_DEBUGP("SWIMS: Allocation failure\n"); snprintf(buf, PAGE_SIZE, "Error\n"); return -ENOMEM; } result = sierra_get_swoc_info(udev, swocInfo); if (result < 0) { - US_DEBUGP("SWIMS: failed SWoC query\n"); + dev_dbg(dev, "SWIMS: failed SWoC query\n"); kfree(swocInfo); snprintf(buf, PAGE_SIZE, "Error\n"); return -EIO; } - debug_swoc(swocInfo); + debug_swoc(dev, swocInfo); result = snprintf(buf, PAGE_SIZE, "REV=%02d SKU=%04X VER=%04X\n", swocInfo->rev, @@ -138,61 +137,55 @@ int sierra_ms_init(struct us_data *us) sh = us_to_host(us); scsi_get_host_dev(sh); - US_DEBUGP("SWIMS: sierra_ms_init called\n"); - /* Force Modem mode */ if (swi_tru_install == TRU_FORCE_MODEM) { - US_DEBUGP("SWIMS: %s", "Forcing Modem Mode\n"); + usb_stor_dbg(us, "SWIMS: Forcing Modem Mode\n"); result = sierra_set_ms_mode(udev, SWIMS_SET_MODE_Modem); if (result < 0) - US_DEBUGP("SWIMS: Failed to switch to modem mode.\n"); + usb_stor_dbg(us, "SWIMS: Failed to switch to modem mode\n"); return -EIO; } /* Force Mass Storage mode (keep CD-Rom) */ else if (swi_tru_install == TRU_FORCE_MS) { - US_DEBUGP("SWIMS: %s", "Forcing Mass Storage Mode\n"); + usb_stor_dbg(us, "SWIMS: Forcing Mass Storage Mode\n"); goto complete; } /* Normal TRU-Install Logic */ else { - US_DEBUGP("SWIMS: %s", "Normal SWoC Logic\n"); + usb_stor_dbg(us, "SWIMS: Normal SWoC Logic\n"); swocInfo = kmalloc(sizeof(struct swoc_info), GFP_KERNEL); - if (!swocInfo) { - US_DEBUGP("SWIMS: %s", "Allocation failure\n"); + if (!swocInfo) return -ENOMEM; - } retries = 3; do { retries--; result = sierra_get_swoc_info(udev, swocInfo); if (result < 0) { - US_DEBUGP("SWIMS: %s", "Failed SWoC query\n"); + usb_stor_dbg(us, "SWIMS: Failed SWoC query\n"); schedule_timeout_uninterruptible(2*HZ); } } while (retries && result < 0); if (result < 0) { - US_DEBUGP("SWIMS: %s", - "Completely failed SWoC query\n"); + usb_stor_dbg(us, "SWIMS: Completely failed SWoC query\n"); kfree(swocInfo); return -EIO; } - debug_swoc(swocInfo); + debug_swoc(&us->pusb_dev->dev, swocInfo); /* If there is not Linux software on the TRU-Install device * then switch to modem mode */ if (!containsFullLinuxPackage(swocInfo)) { - US_DEBUGP("SWIMS: %s", - "Switching to Modem Mode\n"); + usb_stor_dbg(us, "SWIMS: Switching to Modem Mode\n"); result = sierra_set_ms_mode(udev, SWIMS_SET_MODE_Modem); if (result < 0) - US_DEBUGP("SWIMS: Failed to switch modem\n"); + usb_stor_dbg(us, "SWIMS: Failed to switch modem\n"); kfree(swocInfo); return -EIO; } diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index c0543c83923e..22c7d4360fa2 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -166,7 +166,7 @@ static int usb_stor_msg_common(struct us_data *us, int timeout) /* cancel the URB, if it hasn't been cancelled already */ if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags)) { - US_DEBUGP("-- cancelling URB\n"); + usb_stor_dbg(us, "-- cancelling URB\n"); usb_unlink_urb(us->current_urb); } } @@ -178,8 +178,8 @@ static int usb_stor_msg_common(struct us_data *us, int timeout) clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags); if (timeleft <= 0) { - US_DEBUGP("%s -- cancelling URB\n", - timeleft == 0 ? "Timeout" : "Signal"); + usb_stor_dbg(us, "%s -- cancelling URB\n", + timeleft == 0 ? "Timeout" : "Signal"); usb_kill_urb(us->current_urb); } @@ -197,9 +197,8 @@ int usb_stor_control_msg(struct us_data *us, unsigned int pipe, { int status; - US_DEBUGP("%s: rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n", - __func__, request, requesttype, - value, index, size); + usb_stor_dbg(us, "rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n", + request, requesttype, value, index, size); /* fill in the devrequest structure */ us->cr->bRequestType = requesttype; @@ -249,7 +248,7 @@ int usb_stor_clear_halt(struct us_data *us, unsigned int pipe) if (result >= 0) usb_reset_endpoint(us->pusb_dev, endp); - US_DEBUGP("%s: result = %d\n", __func__, result); + usb_stor_dbg(us, "result = %d\n", result); return result; } EXPORT_SYMBOL_GPL(usb_stor_clear_halt); @@ -265,18 +264,18 @@ EXPORT_SYMBOL_GPL(usb_stor_clear_halt); static int interpret_urb_result(struct us_data *us, unsigned int pipe, unsigned int length, int result, unsigned int partial) { - US_DEBUGP("Status code %d; transferred %u/%u\n", - result, partial, length); + usb_stor_dbg(us, "Status code %d; transferred %u/%u\n", + result, partial, length); switch (result) { /* no error code; did we send all the data? */ case 0: if (partial != length) { - US_DEBUGP("-- short transfer\n"); + usb_stor_dbg(us, "-- short transfer\n"); return USB_STOR_XFER_SHORT; } - US_DEBUGP("-- transfer complete\n"); + usb_stor_dbg(us, "-- transfer complete\n"); return USB_STOR_XFER_GOOD; /* stalled */ @@ -284,39 +283,40 @@ static int interpret_urb_result(struct us_data *us, unsigned int pipe, /* for control endpoints, (used by CB[I]) a stall indicates * a failed command */ if (usb_pipecontrol(pipe)) { - US_DEBUGP("-- stall on control pipe\n"); + usb_stor_dbg(us, "-- stall on control pipe\n"); return USB_STOR_XFER_STALLED; } /* for other sorts of endpoint, clear the stall */ - US_DEBUGP("clearing endpoint halt for pipe 0x%x\n", pipe); + usb_stor_dbg(us, "clearing endpoint halt for pipe 0x%x\n", + pipe); if (usb_stor_clear_halt(us, pipe) < 0) return USB_STOR_XFER_ERROR; return USB_STOR_XFER_STALLED; /* babble - the device tried to send more than we wanted to read */ case -EOVERFLOW: - US_DEBUGP("-- babble\n"); + usb_stor_dbg(us, "-- babble\n"); return USB_STOR_XFER_LONG; /* the transfer was cancelled by abort, disconnect, or timeout */ case -ECONNRESET: - US_DEBUGP("-- transfer cancelled\n"); + usb_stor_dbg(us, "-- transfer cancelled\n"); return USB_STOR_XFER_ERROR; /* short scatter-gather read transfer */ case -EREMOTEIO: - US_DEBUGP("-- short read transfer\n"); + usb_stor_dbg(us, "-- short read transfer\n"); return USB_STOR_XFER_SHORT; /* abort or disconnect in progress */ case -EIO: - US_DEBUGP("-- abort or disconnect in progress\n"); + usb_stor_dbg(us, "-- abort or disconnect in progress\n"); return USB_STOR_XFER_ERROR; /* the catch-all error case */ default: - US_DEBUGP("-- unknown error\n"); + usb_stor_dbg(us, "-- unknown error\n"); return USB_STOR_XFER_ERROR; } } @@ -331,9 +331,8 @@ int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe, { int result; - US_DEBUGP("%s: rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n", - __func__, request, requesttype, - value, index, size); + usb_stor_dbg(us, "rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n", + request, requesttype, value, index, size); /* fill in the devrequest structure */ us->cr->bRequestType = requesttype; @@ -367,7 +366,7 @@ static int usb_stor_intr_transfer(struct us_data *us, void *buf, unsigned int pipe = us->recv_intr_pipe; unsigned int maxp; - US_DEBUGP("%s: xfer %u bytes\n", __func__, length); + usb_stor_dbg(us, "xfer %u bytes\n", length); /* calculate the max packet size */ maxp = usb_maxpacket(us->pusb_dev, pipe, usb_pipeout(pipe)); @@ -394,7 +393,7 @@ int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe, { int result; - US_DEBUGP("%s: xfer %u bytes\n", __func__, length); + usb_stor_dbg(us, "xfer %u bytes\n", length); /* fill and submit the URB */ usb_fill_bulk_urb(us->current_urb, us->pusb_dev, pipe, buf, length, @@ -426,12 +425,11 @@ static int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe, return USB_STOR_XFER_ERROR; /* initialize the scatter-gather request block */ - US_DEBUGP("%s: xfer %u bytes, %d entries\n", __func__, - length, num_sg); + usb_stor_dbg(us, "xfer %u bytes, %d entries\n", length, num_sg); result = usb_sg_init(&us->current_sg, us->pusb_dev, pipe, 0, sg, num_sg, length, GFP_NOIO); if (result) { - US_DEBUGP("usb_sg_init returned %d\n", result); + usb_stor_dbg(us, "usb_sg_init returned %d\n", result); return USB_STOR_XFER_ERROR; } @@ -444,7 +442,7 @@ static int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe, /* cancel the request, if it hasn't been cancelled already */ if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags)) { - US_DEBUGP("-- cancelling sg request\n"); + usb_stor_dbg(us, "-- cancelling sg request\n"); usb_sg_cancel(&us->current_sg); } } @@ -609,14 +607,14 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) * short-circuit all other processing */ if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { - US_DEBUGP("-- command was aborted\n"); + usb_stor_dbg(us, "-- command was aborted\n"); srb->result = DID_ABORT << 16; goto Handle_Errors; } /* if there is a transport error, reset and don't auto-sense */ if (result == USB_STOR_TRANSPORT_ERROR) { - US_DEBUGP("-- transport indicates error, resetting\n"); + usb_stor_dbg(us, "-- transport indicates error, resetting\n"); srb->result = DID_ERROR << 16; goto Handle_Errors; } @@ -645,7 +643,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) */ if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_DPCM_USB) && srb->sc_data_direction != DMA_FROM_DEVICE) { - US_DEBUGP("-- CB transport device requiring auto-sense\n"); + usb_stor_dbg(us, "-- CB transport device requiring auto-sense\n"); need_auto_sense = 1; } @@ -655,7 +653,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) * "failure" and an "error" in the transport mechanism. */ if (result == USB_STOR_TRANSPORT_FAILED) { - US_DEBUGP("-- transport indicates command failure\n"); + usb_stor_dbg(us, "-- transport indicates command failure\n"); need_auto_sense = 1; } @@ -670,7 +668,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) !(us->fflags & US_FL_SANE_SENSE) && !(us->fflags & US_FL_BAD_SENSE) && !(srb->cmnd[2] & 0x20))) { - US_DEBUGP("-- SAT supported, increasing auto-sense\n"); + usb_stor_dbg(us, "-- SAT supported, increasing auto-sense\n"); us->fflags |= US_FL_SANE_SENSE; } @@ -684,7 +682,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) (srb->cmnd[0] == MODE_SENSE) || (srb->cmnd[0] == LOG_SENSE) || (srb->cmnd[0] == MODE_SENSE_10))) { - US_DEBUGP("-- unexpectedly short transfer\n"); + usb_stor_dbg(us, "-- unexpectedly short transfer\n"); } /* Now, if we need to do the auto-sense, let's do it */ @@ -700,7 +698,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) if (us->fflags & US_FL_SANE_SENSE) sense_size = ~0; Retry_Sense: - US_DEBUGP("Issuing auto-REQUEST_SENSE\n"); + usb_stor_dbg(us, "Issuing auto-REQUEST_SENSE\n"); scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sense_size); @@ -719,7 +717,7 @@ Retry_Sense: scsi_eh_restore_cmnd(srb, &ses); if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { - US_DEBUGP("-- auto-sense aborted\n"); + usb_stor_dbg(us, "-- auto-sense aborted\n"); srb->result = DID_ABORT << 16; /* If SANE_SENSE caused this problem, disable it */ @@ -737,7 +735,7 @@ Retry_Sense: */ if (temp_result == USB_STOR_TRANSPORT_FAILED && sense_size != US_SENSE_SIZE) { - US_DEBUGP("-- auto-sense failure, retry small sense\n"); + usb_stor_dbg(us, "-- auto-sense failure, retry small sense\n"); sense_size = US_SENSE_SIZE; us->fflags &= ~US_FL_SANE_SENSE; us->fflags |= US_FL_BAD_SENSE; @@ -746,7 +744,7 @@ Retry_Sense: /* Other failures */ if (temp_result != USB_STOR_TRANSPORT_GOOD) { - US_DEBUGP("-- auto-sense failure\n"); + usb_stor_dbg(us, "-- auto-sense failure\n"); /* we skip the reset if this happens to be a * multi-target device, since failure of an @@ -766,27 +764,28 @@ Retry_Sense: !(us->fflags & US_FL_SANE_SENSE) && !(us->fflags & US_FL_BAD_SENSE) && (srb->sense_buffer[0] & 0x7C) == 0x70) { - US_DEBUGP("-- SANE_SENSE support enabled\n"); + usb_stor_dbg(us, "-- SANE_SENSE support enabled\n"); us->fflags |= US_FL_SANE_SENSE; /* Indicate to the user that we truncated their sense * because we didn't know it supported larger sense. */ - US_DEBUGP("-- Sense data truncated to %i from %i\n", - US_SENSE_SIZE, - srb->sense_buffer[7] + 8); + usb_stor_dbg(us, "-- Sense data truncated to %i from %i\n", + US_SENSE_SIZE, + srb->sense_buffer[7] + 8); srb->sense_buffer[7] = (US_SENSE_SIZE - 8); } scsi_normalize_sense(srb->sense_buffer, SCSI_SENSE_BUFFERSIZE, &sshdr); - US_DEBUGP("-- Result from auto-sense is %d\n", temp_result); - US_DEBUGP("-- code: 0x%x, key: 0x%x, ASC: 0x%x, ASCQ: 0x%x\n", - sshdr.response_code, sshdr.sense_key, - sshdr.asc, sshdr.ascq); + usb_stor_dbg(us, "-- Result from auto-sense is %d\n", + temp_result); + usb_stor_dbg(us, "-- code: 0x%x, key: 0x%x, ASC: 0x%x, ASCQ: 0x%x\n", + sshdr.response_code, sshdr.sense_key, + sshdr.asc, sshdr.ascq); #ifdef CONFIG_USB_STORAGE_DEBUG - usb_stor_show_sense(sshdr.sense_key, sshdr.asc, sshdr.ascq); + usb_stor_show_sense(us, sshdr.sense_key, sshdr.asc, sshdr.ascq); #endif /* set the result so the higher layers expect this data */ @@ -892,20 +891,18 @@ Retry_Sense: /* Stop the current URB transfer */ void usb_stor_stop_transport(struct us_data *us) { - US_DEBUGP("%s called\n", __func__); - /* If the state machine is blocked waiting for an URB, * let's wake it up. The test_and_clear_bit() call * guarantees that if a URB has just been submitted, * it won't be cancelled more than once. */ if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags)) { - US_DEBUGP("-- cancelling URB\n"); + usb_stor_dbg(us, "-- cancelling URB\n"); usb_unlink_urb(us->current_urb); } /* If we are waiting for a scatter-gather operation, cancel it. */ if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags)) { - US_DEBUGP("-- cancelling sg request\n"); + usb_stor_dbg(us, "-- cancelling sg request\n"); usb_sg_cancel(&us->current_sg); } } @@ -928,7 +925,8 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us) us->ifnum, srb->cmnd, srb->cmd_len); /* check the return code for the command */ - US_DEBUGP("Call to usb_stor_ctrl_transfer() returned %d\n", result); + usb_stor_dbg(us, "Call to usb_stor_ctrl_transfer() returned %d\n", + result); /* if we stalled the command, it means command failed */ if (result == USB_STOR_XFER_STALLED) { @@ -946,7 +944,7 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us) pipe = srb->sc_data_direction == DMA_FROM_DEVICE ? us->recv_bulk_pipe : us->send_bulk_pipe; result = usb_stor_bulk_srb(us, pipe, srb); - US_DEBUGP("CBI data stage result is 0x%x\n", result); + usb_stor_dbg(us, "CBI data stage result is 0x%x\n", result); /* if we stalled the data transfer it means command failed */ if (result == USB_STOR_XFER_STALLED) @@ -964,8 +962,8 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us) return USB_STOR_TRANSPORT_GOOD; result = usb_stor_intr_transfer(us, us->iobuf, 2); - US_DEBUGP("Got interrupt data (0x%x, 0x%x)\n", - us->iobuf[0], us->iobuf[1]); + usb_stor_dbg(us, "Got interrupt data (0x%x, 0x%x)\n", + us->iobuf[0], us->iobuf[1]); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; @@ -992,8 +990,8 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us) * into the first byte -- so if it's non-zero, call it a failure. */ if (us->iobuf[0]) { - US_DEBUGP("CBI IRQ data showed reserved bType 0x%x\n", - us->iobuf[0]); + usb_stor_dbg(us, "CBI IRQ data showed reserved bType 0x%x\n", + us->iobuf[0]); goto Failed; } @@ -1034,8 +1032,8 @@ int usb_stor_Bulk_max_lun(struct us_data *us) USB_RECIP_INTERFACE, 0, us->ifnum, us->iobuf, 1, 10*HZ); - US_DEBUGP("GetMaxLUN command result is %d, data is %d\n", - result, us->iobuf[0]); + usb_stor_dbg(us, "GetMaxLUN command result is %d, data is %d\n", + result, us->iobuf[0]); /* if we have a successful request, return the result */ if (result > 0) @@ -1084,14 +1082,14 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) memcpy(bcb->CDB, srb->cmnd, bcb->Length); /* send it to out endpoint */ - US_DEBUGP("Bulk Command S 0x%x T 0x%x L %d F %d Trg %d LUN %d CL %d\n", - le32_to_cpu(bcb->Signature), bcb->Tag, - le32_to_cpu(bcb->DataTransferLength), bcb->Flags, - (bcb->Lun >> 4), (bcb->Lun & 0x0F), - bcb->Length); + usb_stor_dbg(us, "Bulk Command S 0x%x T 0x%x L %d F %d Trg %d LUN %d CL %d\n", + le32_to_cpu(bcb->Signature), bcb->Tag, + le32_to_cpu(bcb->DataTransferLength), bcb->Flags, + (bcb->Lun >> 4), (bcb->Lun & 0x0F), + bcb->Length); result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcb, cbwlen, NULL); - US_DEBUGP("Bulk command transfer result=%d\n", result); + usb_stor_dbg(us, "Bulk command transfer result=%d\n", result); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; @@ -1108,7 +1106,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) unsigned int pipe = srb->sc_data_direction == DMA_FROM_DEVICE ? us->recv_bulk_pipe : us->send_bulk_pipe; result = usb_stor_bulk_srb(us, pipe, srb); - US_DEBUGP("Bulk data transfer result 0x%x\n", result); + usb_stor_dbg(us, "Bulk data transfer result 0x%x\n", result); if (result == USB_STOR_XFER_ERROR) return USB_STOR_TRANSPORT_ERROR; @@ -1127,7 +1125,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) */ /* get CSW for device status */ - US_DEBUGP("Attempting to get CSW...\n"); + usb_stor_dbg(us, "Attempting to get CSW...\n"); result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs, US_BULK_CS_WRAP_LEN, &cswlen); @@ -1136,7 +1134,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) * CSWs. If we encounter such a thing, try to read the CSW again. */ if (result == USB_STOR_XFER_SHORT && cswlen == 0) { - US_DEBUGP("Received 0-length CSW; retrying...\n"); + usb_stor_dbg(us, "Received 0-length CSW; retrying...\n"); result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs, US_BULK_CS_WRAP_LEN, &cswlen); } @@ -1145,24 +1143,24 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) if (result == USB_STOR_XFER_STALLED) { /* get the status again */ - US_DEBUGP("Attempting to get CSW (2nd try)...\n"); + usb_stor_dbg(us, "Attempting to get CSW (2nd try)...\n"); result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs, US_BULK_CS_WRAP_LEN, NULL); } /* if we still have a failure at this point, we're in trouble */ - US_DEBUGP("Bulk status result = %d\n", result); + usb_stor_dbg(us, "Bulk status result = %d\n", result); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; /* check bulk status */ residue = le32_to_cpu(bcs->Residue); - US_DEBUGP("Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n", - le32_to_cpu(bcs->Signature), bcs->Tag, - residue, bcs->Status); + usb_stor_dbg(us, "Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n", + le32_to_cpu(bcs->Signature), bcs->Tag, + residue, bcs->Status); if (!(bcs->Tag == us->tag || (us->fflags & US_FL_BULK_IGNORE_TAG)) || bcs->Status > US_BULK_STAT_PHASE) { - US_DEBUGP("Bulk logical error\n"); + usb_stor_dbg(us, "Bulk logical error\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -1173,12 +1171,12 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) if (!us->bcs_signature) { us->bcs_signature = bcs->Signature; if (us->bcs_signature != cpu_to_le32(US_BULK_CS_SIGN)) - US_DEBUGP("Learnt BCS signature 0x%08X\n", - le32_to_cpu(us->bcs_signature)); + usb_stor_dbg(us, "Learnt BCS signature 0x%08X\n", + le32_to_cpu(us->bcs_signature)); } else if (bcs->Signature != us->bcs_signature) { - US_DEBUGP("Signature mismatch: got %08X, expecting %08X\n", - le32_to_cpu(bcs->Signature), - le32_to_cpu(us->bcs_signature)); + usb_stor_dbg(us, "Signature mismatch: got %08X, expecting %08X\n", + le32_to_cpu(bcs->Signature), + le32_to_cpu(us->bcs_signature)); return USB_STOR_TRANSPORT_ERROR; } @@ -1255,7 +1253,7 @@ static int usb_stor_reset_common(struct us_data *us, int result2; if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) { - US_DEBUGP("No reset during disconnect\n"); + usb_stor_dbg(us, "No reset during disconnect\n"); return -EIO; } @@ -1263,7 +1261,7 @@ static int usb_stor_reset_common(struct us_data *us, request, requesttype, value, index, data, size, 5*HZ); if (result < 0) { - US_DEBUGP("Soft reset failed: %d\n", result); + usb_stor_dbg(us, "Soft reset failed: %d\n", result); return result; } @@ -1273,23 +1271,23 @@ static int usb_stor_reset_common(struct us_data *us, test_bit(US_FLIDX_DISCONNECTING, &us->dflags), HZ*6); if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) { - US_DEBUGP("Reset interrupted by disconnect\n"); + usb_stor_dbg(us, "Reset interrupted by disconnect\n"); return -EIO; } - US_DEBUGP("Soft reset: clearing bulk-in endpoint halt\n"); + usb_stor_dbg(us, "Soft reset: clearing bulk-in endpoint halt\n"); result = usb_stor_clear_halt(us, us->recv_bulk_pipe); - US_DEBUGP("Soft reset: clearing bulk-out endpoint halt\n"); + usb_stor_dbg(us, "Soft reset: clearing bulk-out endpoint halt\n"); result2 = usb_stor_clear_halt(us, us->send_bulk_pipe); /* return a result code based on the result of the clear-halts */ if (result >= 0) result = result2; if (result < 0) - US_DEBUGP("Soft reset failed\n"); + usb_stor_dbg(us, "Soft reset failed\n"); else - US_DEBUGP("Soft reset done\n"); + usb_stor_dbg(us, "Soft reset done\n"); return result; } @@ -1299,8 +1297,6 @@ static int usb_stor_reset_common(struct us_data *us, int usb_stor_CB_reset(struct us_data *us) { - US_DEBUGP("%s called\n", __func__); - memset(us->iobuf, 0xFF, CB_RESET_CMD_SIZE); us->iobuf[0] = SEND_DIAGNOSTIC; us->iobuf[1] = 4; @@ -1315,8 +1311,6 @@ EXPORT_SYMBOL_GPL(usb_stor_CB_reset); */ int usb_stor_Bulk_reset(struct us_data *us) { - US_DEBUGP("%s called\n", __func__); - return usb_stor_reset_common(us, US_BULK_RESET_REQUEST, USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, us->ifnum, NULL, 0); @@ -1336,16 +1330,17 @@ int usb_stor_port_reset(struct us_data *us) result = usb_lock_device_for_reset(us->pusb_dev, us->pusb_intf); if (result < 0) - US_DEBUGP("unable to lock device for reset: %d\n", result); + usb_stor_dbg(us, "unable to lock device for reset: %d\n", + result); else { /* Were we disconnected while waiting for the lock? */ if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) { result = -EIO; - US_DEBUGP("No reset during disconnect\n"); + usb_stor_dbg(us, "No reset during disconnect\n"); } else { result = usb_reset_device(us->pusb_dev); - US_DEBUGP("usb_reset_device returns %d\n", - result); + usb_stor_dbg(us, "usb_reset_device returns %d\n", + result); } usb_unlock_device(us->pusb_dev); } diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index d6bee407af02..5c4fe0749af1 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -183,7 +183,6 @@ int usb_stor_suspend(struct usb_interface *iface, pm_message_t message) /* Wait until no command is running */ mutex_lock(&us->dev_mutex); - US_DEBUGP("%s\n", __func__); if (us->suspend_resume_hook) (us->suspend_resume_hook)(us, US_SUSPEND); @@ -201,7 +200,6 @@ int usb_stor_resume(struct usb_interface *iface) mutex_lock(&us->dev_mutex); - US_DEBUGP("%s\n", __func__); if (us->suspend_resume_hook) (us->suspend_resume_hook)(us, US_RESUME); @@ -214,8 +212,6 @@ int usb_stor_reset_resume(struct usb_interface *iface) { struct us_data *us = usb_get_intfdata(iface); - US_DEBUGP("%s\n", __func__); - /* Report the reset to the SCSI core */ usb_stor_report_bus_reset(us); @@ -236,8 +232,6 @@ int usb_stor_pre_reset(struct usb_interface *iface) { struct us_data *us = usb_get_intfdata(iface); - US_DEBUGP("%s\n", __func__); - /* Make sure no command runs during the reset */ mutex_lock(&us->dev_mutex); return 0; @@ -248,8 +242,6 @@ int usb_stor_post_reset(struct usb_interface *iface) { struct us_data *us = usb_get_intfdata(iface); - US_DEBUGP("%s\n", __func__); - /* Report the reset to the SCSI core */ usb_stor_report_bus_reset(us); @@ -311,11 +303,11 @@ static int usb_stor_control_thread(void * __us) struct Scsi_Host *host = us_to_host(us); for (;;) { - US_DEBUGP("*** thread sleeping.\n"); + usb_stor_dbg(us, "*** thread sleeping\n"); if (wait_for_completion_interruptible(&us->cmnd_ready)) break; - US_DEBUGP("*** thread awakened.\n"); + usb_stor_dbg(us, "*** thread awakened\n"); /* lock the device pointers */ mutex_lock(&(us->dev_mutex)); @@ -327,7 +319,7 @@ static int usb_stor_control_thread(void * __us) if (us->srb == NULL) { scsi_unlock(host); mutex_unlock(&us->dev_mutex); - US_DEBUGP("-- exiting\n"); + usb_stor_dbg(us, "-- exiting\n"); break; } @@ -343,7 +335,7 @@ static int usb_stor_control_thread(void * __us) * is UNKNOWN */ if (us->srb->sc_data_direction == DMA_BIDIRECTIONAL) { - US_DEBUGP("UNKNOWN data direction\n"); + usb_stor_dbg(us, "UNKNOWN data direction\n"); us->srb->result = DID_ERROR << 16; } @@ -352,14 +344,14 @@ static int usb_stor_control_thread(void * __us) */ else if (us->srb->device->id && !(us->fflags & US_FL_SCM_MULT_TARG)) { - US_DEBUGP("Bad target number (%d:%d)\n", - us->srb->device->id, us->srb->device->lun); + usb_stor_dbg(us, "Bad target number (%d:%d)\n", + us->srb->device->id, us->srb->device->lun); us->srb->result = DID_BAD_TARGET << 16; } else if (us->srb->device->lun > us->max_lun) { - US_DEBUGP("Bad LUN (%d:%d)\n", - us->srb->device->id, us->srb->device->lun); + usb_stor_dbg(us, "Bad LUN (%d:%d)\n", + us->srb->device->id, us->srb->device->lun); us->srb->result = DID_BAD_TARGET << 16; } @@ -371,14 +363,14 @@ static int usb_stor_control_thread(void * __us) 0x00, 0x80, 0x02, 0x02, 0x1F, 0x00, 0x00, 0x00}; - US_DEBUGP("Faking INQUIRY command\n"); + usb_stor_dbg(us, "Faking INQUIRY command\n"); fill_inquiry_response(us, data_ptr, 36); us->srb->result = SAM_STAT_GOOD; } /* we've got a command, let's do it! */ else { - US_DEBUG(usb_stor_show_command(us->srb)); + US_DEBUG(usb_stor_show_command(us, us->srb)); us->proto_handler(us->srb, us); usb_mark_last_busy(us->pusb_dev); } @@ -388,12 +380,12 @@ static int usb_stor_control_thread(void * __us) /* indicate that the command is done */ if (us->srb->result != DID_ABORT << 16) { - US_DEBUGP("scsi cmd done, result=0x%x\n", - us->srb->result); + usb_stor_dbg(us, "scsi cmd done, result=0x%x\n", + us->srb->result); us->srb->scsi_done(us->srb); } else { SkipForAbort: - US_DEBUGP("scsi command aborted\n"); + usb_stor_dbg(us, "scsi command aborted\n"); } /* If an abort request was received we need to signal that @@ -435,34 +427,30 @@ SkipForAbort: /* Associate our private data with the USB device */ static int associate_dev(struct us_data *us, struct usb_interface *intf) { - US_DEBUGP("-- %s\n", __func__); - /* Fill in the device-related fields */ us->pusb_dev = interface_to_usbdev(intf); us->pusb_intf = intf; us->ifnum = intf->cur_altsetting->desc.bInterfaceNumber; - US_DEBUGP("Vendor: 0x%04x, Product: 0x%04x, Revision: 0x%04x\n", - le16_to_cpu(us->pusb_dev->descriptor.idVendor), - le16_to_cpu(us->pusb_dev->descriptor.idProduct), - le16_to_cpu(us->pusb_dev->descriptor.bcdDevice)); - US_DEBUGP("Interface Subclass: 0x%02x, Protocol: 0x%02x\n", - intf->cur_altsetting->desc.bInterfaceSubClass, - intf->cur_altsetting->desc.bInterfaceProtocol); + usb_stor_dbg(us, "Vendor: 0x%04x, Product: 0x%04x, Revision: 0x%04x\n", + le16_to_cpu(us->pusb_dev->descriptor.idVendor), + le16_to_cpu(us->pusb_dev->descriptor.idProduct), + le16_to_cpu(us->pusb_dev->descriptor.bcdDevice)); + usb_stor_dbg(us, "Interface Subclass: 0x%02x, Protocol: 0x%02x\n", + intf->cur_altsetting->desc.bInterfaceSubClass, + intf->cur_altsetting->desc.bInterfaceProtocol); /* Store our private data in the interface */ usb_set_intfdata(intf, us); /* Allocate the control/setup and DMA-mapped buffers */ us->cr = kmalloc(sizeof(*us->cr), GFP_KERNEL); - if (!us->cr) { - US_DEBUGP("usb_ctrlrequest allocation failed\n"); + if (!us->cr) return -ENOMEM; - } us->iobuf = usb_alloc_coherent(us->pusb_dev, US_IOBUF_SIZE, GFP_KERNEL, &us->iobuf_dma); if (!us->iobuf) { - US_DEBUGP("I/O buffer allocation failed\n"); + usb_stor_dbg(us, "I/O buffer allocation failed\n"); return -ENOMEM; } return 0; @@ -738,7 +726,7 @@ static int get_pipes(struct us_data *us) } if (!ep_in || !ep_out || (us->protocol == USB_PR_CBI && !ep_int)) { - US_DEBUGP("Endpoint sanity check failed! Rejecting dev.\n"); + usb_stor_dbg(us, "Endpoint sanity check failed! Rejecting dev.\n"); return -EIO; } @@ -765,7 +753,7 @@ static int usb_stor_acquire_resources(struct us_data *us) us->current_urb = usb_alloc_urb(0, GFP_KERNEL); if (!us->current_urb) { - US_DEBUGP("URB allocation failed\n"); + usb_stor_dbg(us, "URB allocation failed\n"); return -ENOMEM; } @@ -792,20 +780,18 @@ static int usb_stor_acquire_resources(struct us_data *us) /* Release all our dynamic resources */ static void usb_stor_release_resources(struct us_data *us) { - US_DEBUGP("-- %s\n", __func__); - /* Tell the control thread to exit. The SCSI host must * already have been removed and the DISCONNECTING flag set * so that we won't accept any more commands. */ - US_DEBUGP("-- sending exit command to thread\n"); + usb_stor_dbg(us, "-- sending exit command to thread\n"); complete(&us->cmnd_ready); if (us->ctl_thread) kthread_stop(us->ctl_thread); /* Call the destructor routine, if it exists */ if (us->extra_destructor) { - US_DEBUGP("-- calling extra_destructor()\n"); + usb_stor_dbg(us, "-- calling extra_destructor()\n"); us->extra_destructor(us->extra); } @@ -817,8 +803,6 @@ static void usb_stor_release_resources(struct us_data *us) /* Dissociate from the USB device */ static void dissociate_dev(struct us_data *us) { - US_DEBUGP("-- %s\n", __func__); - /* Free the buffers */ kfree(us->cr); usb_free_coherent(us->pusb_dev, US_IOBUF_SIZE, us->iobuf, us->iobuf_dma); @@ -918,7 +902,7 @@ int usb_stor_probe1(struct us_data **pus, struct us_data *us; int result; - US_DEBUGP("USB Mass Storage device detected\n"); + dev_info(&intf->dev, "USB Mass Storage device detected\n"); /* * Ask the SCSI layer to allocate a host structure, with extra @@ -926,8 +910,7 @@ int usb_stor_probe1(struct us_data **pus, */ host = scsi_host_alloc(&usb_stor_host_template, sizeof(*us)); if (!host) { - dev_warn(&intf->dev, - "Unable to allocate the scsi host\n"); + dev_warn(&intf->dev, "Unable to allocate the scsi host\n"); return -ENOMEM; } @@ -964,7 +947,7 @@ int usb_stor_probe1(struct us_data **pus, return 0; BadDevice: - US_DEBUGP("storage_probe() failed\n"); + usb_stor_dbg(us, "storage_probe() failed\n"); release_everything(us); return result; } @@ -981,8 +964,8 @@ int usb_stor_probe2(struct us_data *us) result = -ENXIO; goto BadDevice; } - US_DEBUGP("Transport: %s\n", us->transport_name); - US_DEBUGP("Protocol: %s\n", us->protocol_name); + usb_stor_dbg(us, "Transport: %s\n", us->transport_name); + usb_stor_dbg(us, "Protocol: %s\n", us->protocol_name); /* fix for single-lun devices */ if (us->fflags & US_FL_SINGLE_LUN) @@ -1028,7 +1011,7 @@ int usb_stor_probe2(struct us_data *us) /* We come here if there are any problems */ BadDevice: - US_DEBUGP("storage_probe() failed\n"); + usb_stor_dbg(us, "storage_probe() failed\n"); release_everything(us); return result; } @@ -1039,7 +1022,6 @@ void usb_stor_disconnect(struct usb_interface *intf) { struct us_data *us = usb_get_intfdata(intf); - US_DEBUGP("storage_disconnect() called\n"); quiesce_and_remove_host(us); release_everything(us); } @@ -1075,8 +1057,7 @@ static int storage_probe(struct usb_interface *intf, } else { unusual_dev = &for_dynamic_ids; - US_DEBUGP("%s %s 0x%04x 0x%04x\n", "Use Bulk-Only transport", - "with the Transparent SCSI protocol for dynamic id:", + dev_dbg(&intf->dev, "Use Bulk-Only transport with the Transparent SCSI protocol for dynamic id: 0x%04x 0x%04x\n", id->idVendor, id->idProduct); } @@ -1090,10 +1071,6 @@ static int storage_probe(struct usb_interface *intf, return result; } -/*********************************************************************** - * Initialization and registration - ***********************************************************************/ - static struct usb_driver usb_storage_driver = { .name = "usb-storage", .probe = storage_probe, @@ -1108,30 +1085,4 @@ static struct usb_driver usb_storage_driver = { .soft_unbind = 1, }; -static int __init usb_stor_init(void) -{ - int retval; - - pr_info("Initializing USB Mass Storage driver...\n"); - - /* register the driver, return usb_register return code if error */ - retval = usb_register(&usb_storage_driver); - if (retval == 0) - pr_info("USB Mass Storage support registered.\n"); - return retval; -} - -static void __exit usb_stor_exit(void) -{ - US_DEBUGP("usb_stor_exit() called\n"); - - /* Deregister the driver - * This will cause disconnect() to be called for each - * attached unit - */ - US_DEBUGP("-- calling usb_deregister()\n"); - usb_deregister(&usb_storage_driver) ; -} - -module_init(usb_stor_init); -module_exit(usb_stor_exit); +module_usb_driver(usb_storage_driver); diff --git a/drivers/usb/usb-common.c b/drivers/usb/usb-common.c index d29503e954ab..0db0a919d72b 100644 --- a/drivers/usb/usb-common.c +++ b/drivers/usb/usb-common.c @@ -14,6 +14,32 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/usb/ch9.h> +#include <linux/usb/otg.h> + +const char *usb_otg_state_string(enum usb_otg_state state) +{ + static const char *const names[] = { + [OTG_STATE_A_IDLE] = "a_idle", + [OTG_STATE_A_WAIT_VRISE] = "a_wait_vrise", + [OTG_STATE_A_WAIT_BCON] = "a_wait_bcon", + [OTG_STATE_A_HOST] = "a_host", + [OTG_STATE_A_SUSPEND] = "a_suspend", + [OTG_STATE_A_PERIPHERAL] = "a_peripheral", + [OTG_STATE_A_WAIT_VFALL] = "a_wait_vfall", + [OTG_STATE_A_VBUS_ERR] = "a_vbus_err", + [OTG_STATE_B_IDLE] = "b_idle", + [OTG_STATE_B_SRP_INIT] = "b_srp_init", + [OTG_STATE_B_PERIPHERAL] = "b_peripheral", + [OTG_STATE_B_WAIT_ACON] = "b_wait_acon", + [OTG_STATE_B_HOST] = "b_host", + }; + + if (state < 0 || state >= ARRAY_SIZE(names)) + return "UNDEFINED"; + + return names[state]; +} +EXPORT_SYMBOL_GPL(usb_otg_state_string); const char *usb_speed_string(enum usb_device_speed speed) { @@ -32,4 +58,25 @@ const char *usb_speed_string(enum usb_device_speed speed) } EXPORT_SYMBOL_GPL(usb_speed_string); +const char *usb_state_string(enum usb_device_state state) +{ + static const char *const names[] = { + [USB_STATE_NOTATTACHED] = "not attached", + [USB_STATE_ATTACHED] = "attached", + [USB_STATE_POWERED] = "powered", + [USB_STATE_RECONNECTING] = "reconnecting", + [USB_STATE_UNAUTHENTICATED] = "unauthenticated", + [USB_STATE_DEFAULT] = "default", + [USB_STATE_ADDRESS] = "addresssed", + [USB_STATE_CONFIGURED] = "configured", + [USB_STATE_SUSPENDED] = "suspended", + }; + + if (state < 0 || state >= ARRAY_SIZE(names)) + return "UNKNOWN"; + + return names[state]; +} +EXPORT_SYMBOL_GPL(usb_state_string); + MODULE_LICENSE("GPL"); diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index ce310170829f..7ed3b039dbe8 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -61,11 +61,10 @@ struct usb_skel { __u8 bulk_out_endpointAddr; /* the address of the bulk out endpoint */ int errors; /* the last request tanked */ bool ongoing_read; /* a read is going on */ - bool processed_urb; /* indicates we haven't processed the urb */ spinlock_t err_lock; /* lock for errors */ struct kref kref; struct mutex io_mutex; /* synchronize I/O with disconnect */ - struct completion bulk_in_completion; /* to wait for an ongoing read */ + wait_queue_head_t bulk_in_wait; /* to wait for an ongoing read */ }; #define to_skel_dev(d) container_of(d, struct usb_skel, kref) @@ -185,7 +184,7 @@ static void skel_read_bulk_callback(struct urb *urb) dev->ongoing_read = 0; spin_unlock(&dev->err_lock); - complete(&dev->bulk_in_completion); + wake_up_interruptible(&dev->bulk_in_wait); } static int skel_do_read_io(struct usb_skel *dev, size_t count) @@ -206,13 +205,16 @@ static int skel_do_read_io(struct usb_skel *dev, size_t count) dev->ongoing_read = 1; spin_unlock_irq(&dev->err_lock); + /* submit bulk in urb, which means no data to deliver */ + dev->bulk_in_filled = 0; + dev->bulk_in_copied = 0; + /* do it */ rv = usb_submit_urb(dev->bulk_in_urb, GFP_KERNEL); if (rv < 0) { dev_err(&dev->interface->dev, "%s - failed submitting read urb, error %d\n", __func__, rv); - dev->bulk_in_filled = 0; rv = (rv == -ENOMEM) ? rv : -EIO; spin_lock_irq(&dev->err_lock); dev->ongoing_read = 0; @@ -261,25 +263,9 @@ retry: * IO may take forever * hence wait in an interruptible state */ - rv = wait_for_completion_interruptible(&dev->bulk_in_completion); + rv = wait_event_interruptible(dev->bulk_in_wait, (!dev->ongoing_read)); if (rv < 0) goto exit; - /* - * by waiting we also semiprocessed the urb - * we must finish now - */ - dev->bulk_in_copied = 0; - dev->processed_urb = 1; - } - - if (!dev->processed_urb) { - /* - * the URB hasn't been processed - * do it now - */ - wait_for_completion(&dev->bulk_in_completion); - dev->bulk_in_copied = 0; - dev->processed_urb = 1; } /* errors must be reported */ @@ -289,8 +275,6 @@ retry: dev->errors = 0; /* to preserve notifications about reset */ rv = (rv == -EPIPE) ? rv : -EIO; - /* no data to deliver */ - dev->bulk_in_filled = 0; /* report it */ goto exit; } @@ -526,7 +510,7 @@ static int skel_probe(struct usb_interface *interface, mutex_init(&dev->io_mutex); spin_lock_init(&dev->err_lock); init_usb_anchor(&dev->submitted); - init_completion(&dev->bulk_in_completion); + init_waitqueue_head(&dev->bulk_in_wait); dev->udev = usb_get_dev(interface_to_usbdev(interface)); dev->interface = interface; diff --git a/drivers/usb/wusbcore/Kconfig b/drivers/usb/wusbcore/Kconfig index 8bf19760d447..0e17b966e1b4 100644 --- a/drivers/usb/wusbcore/Kconfig +++ b/drivers/usb/wusbcore/Kconfig @@ -3,7 +3,6 @@ # config USB_WUSB tristate "Enable Wireless USB extensions" - depends on USB depends on PCI depends on UWB select CRYPTO @@ -19,7 +18,6 @@ config USB_WUSB config USB_WUSB_CBAF tristate "Support WUSB Cable Based Association (CBA)" - depends on USB help Some WUSB devices support Cable Based Association. It's used to enable the secure communication between the host and the diff --git a/include/linux/platform_data/dwc3-omap.h b/include/linux/platform_data/dwc3-omap.h index ada401244e0b..1d36ca874cc8 100644 --- a/include/linux/platform_data/dwc3-omap.h +++ b/include/linux/platform_data/dwc3-omap.h @@ -41,7 +41,3 @@ enum dwc3_omap_utmi_mode { DWC3_OMAP_UTMI_MODE_HW, DWC3_OMAP_UTMI_MODE_SW, }; - -struct dwc3_omap_data { - enum dwc3_omap_utmi_mode utmi_mode; -}; diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h index 944b01dd103e..98b7925f1a2d 100644 --- a/include/linux/platform_data/mv_usb.h +++ b/include/linux/platform_data/mv_usb.h @@ -34,8 +34,6 @@ struct mv_usb_addon_irq { }; struct mv_usb_platform_data { - unsigned int clknum; - char **clkname; struct mv_usb_addon_irq *id; /* Only valid for OTG. ID pin change*/ struct mv_usb_addon_irq *vbus; /* valid for OTG/UDC. VBUS change*/ diff --git a/include/linux/usb.h b/include/linux/usb.h index 4d22d0f6167a..a0bee5a28d1a 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -469,14 +469,12 @@ struct usb3_lpm_parameters { * @lpm_capable: device supports LPM * @usb2_hw_lpm_capable: device can perform USB2 hardware LPM * @usb2_hw_lpm_enabled: USB2 hardware LPM enabled + * @usb3_lpm_enabled: USB3 hardware LPM enabled * @string_langid: language ID for strings * @product: iProduct string, if present (static) * @manufacturer: iManufacturer string, if present (static) * @serial: iSerialNumber string, if present (static) * @filelist: usbfs files that are open to this device - * @usb_classdev: USB class device that was created for usbfs device - * access from userspace - * @usbfs_dentry: usbfs dentry entry for the device * @maxchild: number of ports if hub * @quirks: quirks of the whole device * @urbnum: number of URBs submitted for the whole device @@ -619,7 +617,7 @@ static inline bool usb_acpi_power_manageable(struct usb_device *hdev, int index) #endif /* USB autosuspend and autoresume */ -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME extern void usb_enable_autosuspend(struct usb_device *udev); extern void usb_disable_autosuspend(struct usb_device *udev); @@ -978,7 +976,12 @@ struct usbdrv_wrap { * the "usbfs" filesystem. This lets devices provide ways to * expose information to user space regardless of where they * do (or don't) show up otherwise in the filesystem. - * @suspend: Called when the device is going to be suspended by the system. + * @suspend: Called when the device is going to be suspended by the + * system either from system sleep or runtime suspend context. The + * return value will be ignored in system sleep context, so do NOT + * try to continue using the device if suspend fails in this case. + * Instead, let the resume or reset-resume routine recover from + * the failure. * @resume: Called when the device is being resumed by the system. * @reset_resume: Called when the suspended device has been reset instead * of being resumed. diff --git a/include/linux/usb/cdc-wdm.h b/include/linux/usb/cdc-wdm.h index 719c332620fa..0b3f4295c025 100644 --- a/include/linux/usb/cdc-wdm.h +++ b/include/linux/usb/cdc-wdm.h @@ -11,6 +11,8 @@ #ifndef __LINUX_USB_CDC_WDM_H #define __LINUX_USB_CDC_WDM_H +#include <uapi/linux/usb/cdc-wdm.h> + extern struct usb_driver *usb_cdc_wdm_register(struct usb_interface *intf, struct usb_endpoint_descriptor *ep, int bufsize, diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 9c210f2283df..27603bcbb9b9 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -43,4 +43,13 @@ */ extern const char *usb_speed_string(enum usb_device_speed speed); + +/** + * usb_state_string - Returns human readable name for the state. + * @state: The state to return a human-readable name for. If it's not + * any of the states devices in usb_device_state_string enum, + * the string UNKNOWN will be returned. + */ +extern const char *usb_state_string(enum usb_device_state state); + #endif /* __LINUX_USB_CH9_H */ diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 8860594d6364..5e61589fc166 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -39,6 +39,7 @@ #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> #include <linux/log2.h> +#include <linux/configfs.h> /* * USB function drivers should return USB_GADGET_DELAYED_STATUS if they @@ -464,6 +465,8 @@ struct usb_function_driver { }; struct usb_function_instance { + struct config_group group; + struct list_head cfs_list; struct usb_function_driver *fd; void (*free_func_inst)(struct usb_function_instance *inst); }; diff --git a/include/linux/usb/dwc3-omap.h b/include/linux/usb/dwc3-omap.h index 51eae14477f7..5615f4d82724 100644 --- a/include/linux/usb/dwc3-omap.h +++ b/include/linux/usb/dwc3-omap.h @@ -19,11 +19,11 @@ enum omap_dwc3_vbus_id_status { }; #if (defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_DWC3_MODULE)) -extern void dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status); +extern int dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status); #else -static inline void dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status) +static inline int dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status) { - return; + return -ENODEV; } #endif diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 2e297e80d59a..c454a88abf2e 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -482,6 +482,7 @@ struct usb_gadget_ops { * @speed: Speed of current connection to USB host. * @max_speed: Maximal speed the UDC can handle. UDC must support this * and all slower speeds. + * @state: the state we are now (attached, suspended, configured, etc) * @sg_supported: true if we can handle scatter-gather * @is_otg: True if the USB device port uses a Mini-AB jack, so that the * gadget driver must provide a USB OTG descriptor. @@ -525,6 +526,7 @@ struct usb_gadget { struct list_head ep_list; /* of usb_ep */ enum usb_device_speed speed; enum usb_device_speed max_speed; + enum usb_device_state state; unsigned sg_supported:1; unsigned is_otg:1; unsigned is_a_peripheral:1; @@ -872,6 +874,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver); */ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver); +extern int usb_add_gadget_udc_release(struct device *parent, + struct usb_gadget *gadget, void (*release)(struct device *dev)); extern int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget); extern void usb_del_gadget_udc(struct usb_gadget *gadget); extern int udc_attach_driver(const char *name, @@ -959,6 +963,13 @@ extern void usb_gadget_unmap_request(struct usb_gadget *gadget, /*-------------------------------------------------------------------------*/ +/* utility to set gadget state properly */ + +extern void usb_gadget_set_state(struct usb_gadget *gadget, + enum usb_device_state state); + +/*-------------------------------------------------------------------------*/ + /* utility wrapping a simple endpoint selection policy */ extern struct usb_ep *usb_ep_autoconfig(struct usb_gadget *, diff --git a/include/linux/usb/gadget_configfs.h b/include/linux/usb/gadget_configfs.h new file mode 100644 index 000000000000..d74c0ae989d5 --- /dev/null +++ b/include/linux/usb/gadget_configfs.h @@ -0,0 +1,110 @@ +#ifndef __GADGET_CONFIGFS__ +#define __GADGET_CONFIGFS__ + +#include <linux/configfs.h> + +int check_user_usb_string(const char *name, + struct usb_gadget_strings *stringtab_dev); + +#define GS_STRINGS_W(__struct, __name) \ + static ssize_t __struct##_##__name##_store(struct __struct *gs, \ + const char *page, size_t len) \ +{ \ + int ret; \ + \ + ret = usb_string_copy(page, &gs->__name); \ + if (ret) \ + return ret; \ + return len; \ +} + +#define GS_STRINGS_R(__struct, __name) \ + static ssize_t __struct##_##__name##_show(struct __struct *gs, \ + char *page) \ +{ \ + return sprintf(page, "%s\n", gs->__name ?: ""); \ +} + +#define GS_STRING_ITEM_ATTR(struct_name, name) \ + static struct struct_name##_attribute struct_name##_##name = \ + __CONFIGFS_ATTR(name, S_IRUGO | S_IWUSR, \ + struct_name##_##name##_show, \ + struct_name##_##name##_store) + +#define GS_STRINGS_RW(struct_name, _name) \ + GS_STRINGS_R(struct_name, _name) \ + GS_STRINGS_W(struct_name, _name) \ + GS_STRING_ITEM_ATTR(struct_name, _name) + +#define USB_CONFIG_STRING_RW_OPS(struct_in) \ + CONFIGFS_ATTR_OPS(struct_in); \ + \ +static struct configfs_item_operations struct_in##_langid_item_ops = { \ + .release = struct_in##_attr_release, \ + .show_attribute = struct_in##_attr_show, \ + .store_attribute = struct_in##_attr_store, \ +}; \ + \ +static struct config_item_type struct_in##_langid_type = { \ + .ct_item_ops = &struct_in##_langid_item_ops, \ + .ct_attrs = struct_in##_langid_attrs, \ + .ct_owner = THIS_MODULE, \ +} + +#define USB_CONFIG_STRINGS_LANG(struct_in, struct_member) \ + static struct config_group *struct_in##_strings_make( \ + struct config_group *group, \ + const char *name) \ + { \ + struct struct_member *gi; \ + struct struct_in *gs; \ + struct struct_in *new; \ + int langs = 0; \ + int ret; \ + \ + new = kzalloc(sizeof(*new), GFP_KERNEL); \ + if (!new) \ + return ERR_PTR(-ENOMEM); \ + \ + ret = check_user_usb_string(name, &new->stringtab_dev); \ + if (ret) \ + goto err; \ + config_group_init_type_name(&new->group, name, \ + &struct_in##_langid_type); \ + \ + gi = container_of(group, struct struct_member, strings_group); \ + ret = -EEXIST; \ + list_for_each_entry(gs, &gi->string_list, list) { \ + if (gs->stringtab_dev.language == new->stringtab_dev.language) \ + goto err; \ + langs++; \ + } \ + ret = -EOVERFLOW; \ + if (langs >= MAX_USB_STRING_LANGS) \ + goto err; \ + \ + list_add_tail(&new->list, &gi->string_list); \ + return &new->group; \ +err: \ + kfree(new); \ + return ERR_PTR(ret); \ +} \ + \ +static void struct_in##_strings_drop( \ + struct config_group *group, \ + struct config_item *item) \ +{ \ + config_item_put(item); \ +} \ + \ +static struct configfs_group_operations struct_in##_strings_ops = { \ + .make_group = &struct_in##_strings_make, \ + .drop_item = &struct_in##_strings_drop, \ +}; \ + \ +static struct config_item_type struct_in##_strings_type = { \ + .ct_group_ops = &struct_in##_strings_ops, \ + .ct_owner = THIS_MODULE, \ +} + +#endif diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 59694b5e5e90..f5f5c7dfda90 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -84,7 +84,7 @@ struct usb_hcd { struct timer_list rh_timer; /* drives root-hub polling */ struct urb *status_urb; /* the current status urb */ -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME struct work_struct wakeup_work; /* for remote wakeup */ #endif @@ -593,14 +593,14 @@ extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg); extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg); #endif /* CONFIG_PM */ -#ifdef CONFIG_USB_SUSPEND +#ifdef CONFIG_PM_RUNTIME extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd); #else static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd) { return; } -#endif /* CONFIG_USB_SUSPEND */ +#endif /* CONFIG_PM_RUNTIME */ /*-------------------------------------------------------------------------*/ diff --git a/include/linux/usb/musb-ux500.h b/include/linux/usb/musb-ux500.h new file mode 100644 index 000000000000..1e2c7130f6e1 --- /dev/null +++ b/include/linux/usb/musb-ux500.h @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2013 ST-Ericsson AB + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MUSB_UX500_H__ +#define __MUSB_UX500_H__ + +enum ux500_musb_vbus_id_status { + UX500_MUSB_NONE = 0, + UX500_MUSB_VBUS, + UX500_MUSB_ID, + UX500_MUSB_CHARGER, + UX500_MUSB_ENUMERATED, + UX500_MUSB_RIDA, + UX500_MUSB_RIDB, + UX500_MUSB_RIDC, + UX500_MUSB_PREPARE, + UX500_MUSB_CLEAN, +}; + +#endif /* __MUSB_UX500_H__ */ diff --git a/include/linux/usb/nop-usb-xceiv.h b/include/linux/usb/nop-usb-xceiv.h index 28884c717411..148d35171aac 100644 --- a/include/linux/usb/nop-usb-xceiv.h +++ b/include/linux/usb/nop-usb-xceiv.h @@ -5,6 +5,11 @@ struct nop_usb_xceiv_platform_data { enum usb_phy_type type; + unsigned long clk_rate; + + /* if set fails with -EPROBE_DEFER if can't get regulator */ + unsigned int needs_vcc:1; + unsigned int needs_reset:1; }; #if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE)) diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index e8a5fe87c6bd..291e01ba32e5 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -36,14 +36,7 @@ struct usb_otg { }; -#ifdef CONFIG_USB_OTG_UTILS -extern const char *otg_state_string(enum usb_otg_state state); -#else -static inline const char *otg_state_string(enum usb_otg_state state) -{ - return NULL; -} -#endif +extern const char *usb_otg_state_string(enum usb_otg_state state); /* Context: can sleep */ static inline int diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h index 15847cbdb512..6b5978f57633 100644 --- a/include/linux/usb/phy.h +++ b/include/linux/usb/phy.h @@ -91,6 +91,9 @@ struct usb_phy { int (*init)(struct usb_phy *x); void (*shutdown)(struct usb_phy *x); + /* enable/disable VBUS */ + int (*set_vbus)(struct usb_phy *x, int on); + /* effective for B devices, ignored for A-peripheral */ int (*set_power)(struct usb_phy *x, unsigned mA); @@ -160,8 +163,26 @@ usb_phy_shutdown(struct usb_phy *x) x->shutdown(x); } +static inline int +usb_phy_vbus_on(struct usb_phy *x) +{ + if (!x->set_vbus) + return 0; + + return x->set_vbus(x, true); +} + +static inline int +usb_phy_vbus_off(struct usb_phy *x) +{ + if (!x->set_vbus) + return 0; + + return x->set_vbus(x, false); +} + /* for usb host and peripheral controller drivers */ -#ifdef CONFIG_USB_OTG_UTILS +#if IS_ENABLED(CONFIG_USB_PHY) extern struct usb_phy *usb_get_phy(enum usb_phy_type type); extern struct usb_phy *devm_usb_get_phy(struct device *dev, enum usb_phy_type type); @@ -176,29 +197,29 @@ extern int usb_bind_phy(const char *dev_name, u8 index, #else static inline struct usb_phy *usb_get_phy(enum usb_phy_type type) { - return NULL; + return ERR_PTR(-ENXIO); } static inline struct usb_phy *devm_usb_get_phy(struct device *dev, enum usb_phy_type type) { - return NULL; + return ERR_PTR(-ENXIO); } static inline struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index) { - return NULL; + return ERR_PTR(-ENXIO); } static inline struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index) { - return NULL; + return ERR_PTR(-ENXIO); } static inline struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev, const char *phandle, u8 index) { - return NULL; + return ERR_PTR(-ENXIO); } static inline void usb_put_phy(struct usb_phy *x) diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h index c5d36c65c33b..e452ba6ec6bd 100644 --- a/include/linux/usb/renesas_usbhs.h +++ b/include/linux/usb/renesas_usbhs.h @@ -62,14 +62,14 @@ struct renesas_usbhs_platform_callback { * Hardware exit function for platform. * it is called when driver was removed */ - void (*hardware_exit)(struct platform_device *pdev); + int (*hardware_exit)(struct platform_device *pdev); /* * option: * * for board specific clock control */ - void (*power_ctrl)(struct platform_device *pdev, + int (*power_ctrl)(struct platform_device *pdev, void __iomem *base, int enable); /* @@ -77,7 +77,7 @@ struct renesas_usbhs_platform_callback { * * Phy reset for platform */ - void (*phy_reset)(struct platform_device *pdev); + int (*phy_reset)(struct platform_device *pdev); /* * get USB ID function diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 1819b59aab2a..b9b0f7b4e43b 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -15,6 +15,7 @@ #include <linux/kref.h> #include <linux/mutex.h> +#include <linux/serial.h> #include <linux/sysrq.h> #include <linux/kfifo.h> @@ -61,12 +62,12 @@ * @bulk_out_buffers: pointers to the bulk out buffers for this port * @write_urbs: pointers to the bulk out urbs for this port * @write_urbs_free: status bitmap the for bulk out urbs + * @icount: interrupt counters * @tx_bytes: number of bytes currently in host stack queues * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this * port. * @flags: usb serial port flags * @write_wait: a wait_queue_head_t used by the port. - * @delta_msr_wait: modem-status-change wait queue * @work: work queue entry for the line discipline waking up. * @throttled: nonzero if the read urb is inactive to throttle the device * @throttle_req: nonzero if the tty wants to throttle us @@ -109,11 +110,11 @@ struct usb_serial_port { unsigned long write_urbs_free; __u8 bulk_out_endpointAddress; + struct async_icount icount; int tx_bytes; unsigned long flags; wait_queue_head_t write_wait; - wait_queue_head_t delta_msr_wait; struct work_struct work; char throttled; char throttle_req; @@ -272,6 +273,7 @@ struct usb_serial_driver { int (*tiocmget)(struct tty_struct *tty); int (*tiocmset)(struct tty_struct *tty, unsigned int set, unsigned int clear); + int (*tiocmiwait)(struct tty_struct *tty, unsigned long arg); int (*get_icount)(struct tty_struct *tty, struct serial_icounter_struct *icount); /* Called by the tty layer for port level work. There may or may not @@ -329,8 +331,10 @@ extern void usb_serial_generic_read_bulk_callback(struct urb *urb); extern void usb_serial_generic_write_bulk_callback(struct urb *urb); extern void usb_serial_generic_throttle(struct tty_struct *tty); extern void usb_serial_generic_unthrottle(struct tty_struct *tty); -extern void usb_serial_generic_disconnect(struct usb_serial *serial); -extern void usb_serial_generic_release(struct usb_serial *serial); +extern int usb_serial_generic_tiocmiwait(struct tty_struct *tty, + unsigned long arg); +extern int usb_serial_generic_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount); extern int usb_serial_generic_register(void); extern void usb_serial_generic_deregister(void); extern int usb_serial_generic_submit_read_urbs(struct usb_serial_port *port, diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h index 9ebebe906925..1b7519a8c0bf 100644 --- a/include/linux/usb/tegra_usb_phy.h +++ b/include/linux/usb/tegra_usb_phy.h @@ -61,10 +61,14 @@ struct tegra_usb_phy { struct device *dev; bool is_legacy_phy; bool is_ulpi_phy; + void (*set_pts)(struct usb_phy *x, u8 pts_val); + void (*set_phcd)(struct usb_phy *x, bool enable); }; struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance, - void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode); + void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode, + void (*set_pts)(struct usb_phy *x, u8 pts_val), + void (*set_phcd)(struct usb_phy *x, bool enable)); void tegra_usb_phy_preresume(struct usb_phy *phy); @@ -75,8 +79,4 @@ void tegra_ehci_phy_restore_start(struct usb_phy *phy, void tegra_ehci_phy_restore_end(struct usb_phy *phy); -void tegra_ehci_set_pts(struct usb_phy *x, u8 pts_val); - -void tegra_ehci_set_phcd(struct usb_phy *x, bool enable); - #endif /* __TEGRA_USB_PHY_H */ diff --git a/include/uapi/linux/usb/cdc-wdm.h b/include/uapi/linux/usb/cdc-wdm.h new file mode 100644 index 000000000000..f03134feebd6 --- /dev/null +++ b/include/uapi/linux/usb/cdc-wdm.h @@ -0,0 +1,21 @@ +/* + * USB CDC Device Management userspace API definitions + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#ifndef _UAPI__LINUX_USB_CDC_WDM_H +#define _UAPI__LINUX_USB_CDC_WDM_H + +/* + * This IOCTL is used to retrieve the wMaxCommand for the device, + * defining the message limit for both reading and writing. + * + * For CDC WDM functions this will be the wMaxCommand field of the + * Device Management Functional Descriptor. + */ +#define IOCTL_WDM_MAX_COMMAND _IOR('H', 0xA0, __u16) + +#endif /* _UAPI__LINUX_USB_CDC_WDM_H */ diff --git a/include/uapi/linux/usb/ch9.h b/include/uapi/linux/usb/ch9.h index f738e25377ff..aa33fd1b2d4f 100644 --- a/include/uapi/linux/usb/ch9.h +++ b/include/uapi/linux/usb/ch9.h @@ -138,7 +138,7 @@ /* * New Feature Selectors as added by USB 3.0 - * See USB 3.0 spec Table 9-6 + * See USB 3.0 spec Table 9-7 */ #define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */ #define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */ @@ -147,7 +147,7 @@ #define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00 /* - * Suspend Options, Table 9-7 USB 3.0 spec + * Suspend Options, Table 9-8 USB 3.0 spec */ #define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0)) #define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1)) |