diff options
| -rw-r--r-- | Documentation/networking/device_drivers/index.rst | 1 | ||||
| -rw-r--r-- | Documentation/networking/device_drivers/ti/tlan.rst (renamed from Documentation/networking/device_drivers/ti/tlan.txt) | 73 | ||||
| -rw-r--r-- | MAINTAINERS | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/ti/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/ti/tlan.c | 2 |
5 files changed, 52 insertions, 28 deletions
diff --git a/Documentation/networking/device_drivers/index.rst b/Documentation/networking/device_drivers/index.rst index 1d3b664e6921..adc0bf65fb02 100644 --- a/Documentation/networking/device_drivers/index.rst +++ b/Documentation/networking/device_drivers/index.rst @@ -49,6 +49,7 @@ Contents: smsc/smc9 ti/cpsw_switchdev ti/cpsw + ti/tlan .. only:: subproject and html diff --git a/Documentation/networking/device_drivers/ti/tlan.txt b/Documentation/networking/device_drivers/ti/tlan.rst index 34550dfcef74..4fdc0907f4fc 100644 --- a/Documentation/networking/device_drivers/ti/tlan.txt +++ b/Documentation/networking/device_drivers/ti/tlan.rst @@ -1,20 +1,33 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===================== +TLAN driver for Linux +===================== + +:Version: 1.14a + (C) 1997-1998 Caldera, Inc. + (C) 1998 James Banks + (C) 1999-2001 Torben Mathiasen <tmm@image.dk, torben.mathiasen@compaq.com> For driver information/updates visit http://www.compaq.com -TLAN driver for Linux, version 1.14a -README -I. Supported Devices. + +I. Supported Devices +==================== Only PCI devices will work with this driver. Supported: + + ========= ========= =========================================== Vendor ID Device ID Name + ========= ========= =========================================== 0e11 ae32 Compaq Netelligent 10/100 TX PCI UTP 0e11 ae34 Compaq Netelligent 10 T PCI UTP 0e11 ae35 Compaq Integrated NetFlex 3/P @@ -25,13 +38,14 @@ I. Supported Devices. 0e11 b030 Compaq Netelligent 10/100 TX UTP 0e11 f130 Compaq NetFlex 3/P 0e11 f150 Compaq NetFlex 3/P - 108d 0012 Olicom OC-2325 + 108d 0012 Olicom OC-2325 108d 0013 Olicom OC-2183 - 108d 0014 Olicom OC-2326 + 108d 0014 Olicom OC-2326 + ========= ========= =========================================== Caveats: - + I am not sure if 100BaseTX daughterboards (for those cards which support such things) will work. I haven't had any solid evidence either way. @@ -41,21 +55,25 @@ I. Supported Devices. The "Netelligent 10 T/2 PCI UTP/Coax" (b012) device is untested, but I do not expect any problems. - -II. Driver Options + +II. Driver Options +================== + 1. You can append debug=x to the end of the insmod line to get - debug messages, where x is a bit field where the bits mean + debug messages, where x is a bit field where the bits mean the following: - + + ==== ===================================== 0x01 Turn on general debugging messages. 0x02 Turn on receive debugging messages. 0x04 Turn on transmit debugging messages. 0x08 Turn on list debugging messages. + ==== ===================================== 2. You can append aui=1 to the end of the insmod line to cause - the adapter to use the AUI interface instead of the 10 Base T - interface. This is also what to do if you want to use the BNC + the adapter to use the AUI interface instead of the 10 Base T + interface. This is also what to do if you want to use the BNC connector on a TLAN based device. (Setting this option on a device that does not have an AUI/BNC connector will probably cause it to not function correctly.) @@ -70,41 +88,45 @@ II. Driver Options 5. You have to use speed=X duplex=Y together now. If you just do "insmod tlan.o speed=100" the driver will do Auto-Neg. - To force a 10Mbps Half-Duplex link do "insmod tlan.o speed=10 + To force a 10Mbps Half-Duplex link do "insmod tlan.o speed=10 duplex=1". 6. If the driver is built into the kernel, you can use the 3rd and 4th parameters to set aui and debug respectively. For - example: + example:: - ether=0,0,0x1,0x7,eth0 + ether=0,0,0x1,0x7,eth0 This sets aui to 0x1 and debug to 0x7, assuming eth0 is a supported TLAN device. The bits in the third byte are assigned as follows: - 0x01 = aui - 0x02 = use half duplex - 0x04 = use full duplex - 0x08 = use 10BaseT - 0x10 = use 100BaseTx + ==== =============== + 0x01 aui + 0x02 use half duplex + 0x04 use full duplex + 0x08 use 10BaseT + 0x10 use 100BaseTx + ==== =============== You also need to set both speed and duplex settings when forcing - speeds with kernel-parameters. + speeds with kernel-parameters. ether=0,0,0x12,0,eth0 will force link to 100Mbps Half-Duplex. 7. If you have more than one tlan adapter in your system, you can use the above options on a per adapter basis. To force a 100Mbit/HD - link with your eth1 adapter use: - - insmod tlan speed=0,100 duplex=0,1 + link with your eth1 adapter use:: + + insmod tlan speed=0,100 duplex=0,1 Now eth0 will use auto-neg and eth1 will be forced to 100Mbit/HD. Note that the tlan driver supports a maximum of 8 adapters. -III. Things to try if you have problems. +III. Things to try if you have problems +======================================= + 1. Make sure your card's PCI id is among those listed in section I, above. 2. Make sure routing is correct. @@ -113,5 +135,6 @@ III. Things to try if you have problems. There is also a tlan mailing list which you can join by sending "subscribe tlan" in the body of an email to majordomo@vuser.vu.union.edu. + There is also a tlan website at http://www.compaq.com diff --git a/MAINTAINERS b/MAINTAINERS index 94afbf577a06..38dbfbfccb5e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16971,7 +16971,7 @@ M: Samuel Chessman <chessman@tux.org> L: tlan-devel@lists.sourceforge.net (subscribers-only) S: Maintained W: http://sourceforge.net/projects/tlan/ -F: Documentation/networking/device_drivers/ti/tlan.txt +F: Documentation/networking/device_drivers/ti/tlan.rst F: drivers/net/ethernet/ti/tlan.* TM6000 VIDEO4LINUX DRIVER diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig index 89cec778cf2d..7b0ad777828d 100644 --- a/drivers/net/ethernet/ti/Kconfig +++ b/drivers/net/ethernet/ti/Kconfig @@ -138,7 +138,7 @@ config TLAN Devices currently supported by this driver are Compaq Netelligent, Compaq NetFlex and Olicom cards. Please read the file - <file:Documentation/networking/device_drivers/ti/tlan.txt> + <file:Documentation/networking/device_drivers/ti/tlan.rst> for more details. To compile this driver as a module, choose M here. The module diff --git a/drivers/net/ethernet/ti/tlan.c b/drivers/net/ethernet/ti/tlan.c index ad465202980a..857709828058 100644 --- a/drivers/net/ethernet/ti/tlan.c +++ b/drivers/net/ethernet/ti/tlan.c @@ -70,7 +70,7 @@ MODULE_DESCRIPTION("Driver for TI ThunderLAN based ethernet PCI adapters"); MODULE_LICENSE("GPL"); /* Turn on debugging. - * See Documentation/networking/device_drivers/ti/tlan.txt for details + * See Documentation/networking/device_drivers/ti/tlan.rst for details */ static int debug; module_param(debug, int, 0); |