summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt1
-rw-r--r--MAINTAINERS3
-rw-r--r--drivers/usb/chipidea/ci_hdrc_imx.c2
-rw-r--r--drivers/usb/chipidea/ci_hdrc_usb2.c25
-rw-r--r--drivers/usb/chipidea/udc.c84
-rw-r--r--drivers/usb/core/config.c5
-rw-r--r--drivers/usb/dwc3/dwc3-omap.c4
-rw-r--r--drivers/usb/dwc3/gadget.c4
-rw-r--r--drivers/usb/gadget/epautoconf.c1
-rw-r--r--drivers/usb/gadget/udc/amd5536udc.c43
-rw-r--r--drivers/usb/gadget/udc/atmel_usba_udc.c11
-rw-r--r--drivers/usb/gadget/udc/bdc/bdc_core.c3
-rw-r--r--drivers/usb/gadget/udc/dummy_hcd.c46
-rw-r--r--drivers/usb/gadget/udc/gr_udc.c3
-rw-r--r--drivers/usb/gadget/udc/mv_u3d_core.c3
-rw-r--r--drivers/usb/gadget/udc/mv_udc_core.c3
-rw-r--r--drivers/usb/host/xhci-mem.c17
-rw-r--r--drivers/usb/host/xhci-pci.c90
-rw-r--r--drivers/usb/host/xhci-ring.c13
-rw-r--r--drivers/usb/host/xhci.c24
-rw-r--r--drivers/usb/musb/musb_core.c7
-rw-r--r--drivers/usb/musb/musb_cppi41.c3
-rw-r--r--drivers/usb/musb/musb_dsps.c7
-rw-r--r--drivers/usb/musb/ux500.c2
-rw-r--r--drivers/usb/phy/Kconfig2
-rw-r--r--drivers/usb/phy/phy-generic.c3
-rw-r--r--drivers/usb/phy/phy-isp1301.c1
-rw-r--r--drivers/usb/serial/option.c24
-rw-r--r--drivers/usb/serial/whiteheat.c31
29 files changed, 288 insertions, 177 deletions
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index d71ef07bca5d..a057b75ba4b5 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -6,6 +6,7 @@ Required properties:
"lsi,zevio-usb"
"qcom,ci-hdrc"
"chipidea,usb2"
+ "xlnx,zynq-usb-2.20a"
- reg: base address and length of the registers
- interrupts: interrupt for the USB controller
diff --git a/MAINTAINERS b/MAINTAINERS
index a3077df7e68a..9f6685f6c5a9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -615,9 +615,8 @@ F: Documentation/hwmon/fam15h_power
F: drivers/hwmon/fam15h_power.c
AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
-M: Thomas Dahlmann <dahlmann.thomas@arcor.de>
L: linux-geode@lists.infradead.org (moderated for non-subscribers)
-S: Supported
+S: Orphan
F: drivers/usb/gadget/udc/amd5536udc.*
AMD GEODE PROCESSOR/CHIPSET SUPPORT
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 867e9f3f3859..dcc50c878159 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -61,7 +61,7 @@ static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
{ .compatible = "fsl,imx27-usb", .data = &imx27_usb_data},
{ .compatible = "fsl,imx6q-usb", .data = &imx6q_usb_data},
{ .compatible = "fsl,imx6sl-usb", .data = &imx6sl_usb_data},
- { .compatible = "fsl,imx6sx-usb", .data = &imx6sl_usb_data},
+ { .compatible = "fsl,imx6sx-usb", .data = &imx6sx_usb_data},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids);
diff --git a/drivers/usb/chipidea/ci_hdrc_usb2.c b/drivers/usb/chipidea/ci_hdrc_usb2.c
index 9eae1a16cef9..4456d2cf80ff 100644
--- a/drivers/usb/chipidea/ci_hdrc_usb2.c
+++ b/drivers/usb/chipidea/ci_hdrc_usb2.c
@@ -12,6 +12,7 @@
#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_platform.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/usb/chipidea.h>
@@ -30,18 +31,36 @@ static const struct ci_hdrc_platform_data ci_default_pdata = {
.flags = CI_HDRC_DISABLE_STREAMING,
};
+static struct ci_hdrc_platform_data ci_zynq_pdata = {
+ .capoffset = DEF_CAPOFFSET,
+};
+
+static const struct of_device_id ci_hdrc_usb2_of_match[] = {
+ { .compatible = "chipidea,usb2"},
+ { .compatible = "xlnx,zynq-usb-2.20a", .data = &ci_zynq_pdata},
+ { }
+};
+MODULE_DEVICE_TABLE(of, ci_hdrc_usb2_of_match);
+
static int ci_hdrc_usb2_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ci_hdrc_usb2_priv *priv;
struct ci_hdrc_platform_data *ci_pdata = dev_get_platdata(dev);
int ret;
+ const struct of_device_id *match;
if (!ci_pdata) {
ci_pdata = devm_kmalloc(dev, sizeof(*ci_pdata), GFP_KERNEL);
*ci_pdata = ci_default_pdata; /* struct copy */
}
+ match = of_match_device(ci_hdrc_usb2_of_match, &pdev->dev);
+ if (match && match->data) {
+ /* struct copy */
+ *ci_pdata = *(struct ci_hdrc_platform_data *)match->data;
+ }
+
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
@@ -96,12 +115,6 @@ static int ci_hdrc_usb2_remove(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id ci_hdrc_usb2_of_match[] = {
- { .compatible = "chipidea,usb2" },
- { }
-};
-MODULE_DEVICE_TABLE(of, ci_hdrc_usb2_of_match);
-
static struct platform_driver ci_hdrc_usb2_driver = {
.probe = ci_hdrc_usb2_probe,
.remove = ci_hdrc_usb2_remove,
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index a637da25dda0..8223fe73ea85 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -656,6 +656,44 @@ __acquires(hwep->lock)
return 0;
}
+static int _ep_set_halt(struct usb_ep *ep, int value, bool check_transfer)
+{
+ struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
+ int direction, retval = 0;
+ unsigned long flags;
+
+ if (ep == NULL || hwep->ep.desc == NULL)
+ return -EINVAL;
+
+ if (usb_endpoint_xfer_isoc(hwep->ep.desc))
+ return -EOPNOTSUPP;
+
+ spin_lock_irqsave(hwep->lock, flags);
+
+ if (value && hwep->dir == TX && check_transfer &&
+ !list_empty(&hwep->qh.queue) &&
+ !usb_endpoint_xfer_control(hwep->ep.desc)) {
+ spin_unlock_irqrestore(hwep->lock, flags);
+ return -EAGAIN;
+ }
+
+ direction = hwep->dir;
+ do {
+ retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value);
+
+ if (!value)
+ hwep->wedge = 0;
+
+ if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
+ hwep->dir = (hwep->dir == TX) ? RX : TX;
+
+ } while (hwep->dir != direction);
+
+ spin_unlock_irqrestore(hwep->lock, flags);
+ return retval;
+}
+
+
/**
* _gadget_stop_activity: stops all USB activity, flushes & disables all endpts
* @gadget: gadget
@@ -1051,7 +1089,7 @@ __acquires(ci->lock)
num += ci->hw_ep_max / 2;
spin_unlock(&ci->lock);
- err = usb_ep_set_halt(&ci->ci_hw_ep[num].ep);
+ err = _ep_set_halt(&ci->ci_hw_ep[num].ep, 1, false);
spin_lock(&ci->lock);
if (!err)
isr_setup_status_phase(ci);
@@ -1117,8 +1155,8 @@ delegate:
if (err < 0) {
spin_unlock(&ci->lock);
- if (usb_ep_set_halt(&hwep->ep))
- dev_err(ci->dev, "error: ep_set_halt\n");
+ if (_ep_set_halt(&hwep->ep, 1, false))
+ dev_err(ci->dev, "error: _ep_set_halt\n");
spin_lock(&ci->lock);
}
}
@@ -1149,9 +1187,9 @@ __acquires(ci->lock)
err = isr_setup_status_phase(ci);
if (err < 0) {
spin_unlock(&ci->lock);
- if (usb_ep_set_halt(&hwep->ep))
+ if (_ep_set_halt(&hwep->ep, 1, false))
dev_err(ci->dev,
- "error: ep_set_halt\n");
+ "error: _ep_set_halt\n");
spin_lock(&ci->lock);
}
}
@@ -1397,41 +1435,7 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
*/
static int ep_set_halt(struct usb_ep *ep, int value)
{
- struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
- int direction, retval = 0;
- unsigned long flags;
-
- if (ep == NULL || hwep->ep.desc == NULL)
- return -EINVAL;
-
- if (usb_endpoint_xfer_isoc(hwep->ep.desc))
- return -EOPNOTSUPP;
-
- spin_lock_irqsave(hwep->lock, flags);
-
-#ifndef STALL_IN
- /* g_file_storage MS compliant but g_zero fails chapter 9 compliance */
- if (value && hwep->type == USB_ENDPOINT_XFER_BULK && hwep->dir == TX &&
- !list_empty(&hwep->qh.queue)) {
- spin_unlock_irqrestore(hwep->lock, flags);
- return -EAGAIN;
- }
-#endif
-
- direction = hwep->dir;
- do {
- retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value);
-
- if (!value)
- hwep->wedge = 0;
-
- if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
- hwep->dir = (hwep->dir == TX) ? RX : TX;
-
- } while (hwep->dir != direction);
-
- spin_unlock_irqrestore(hwep->lock, flags);
- return retval;
+ return _ep_set_halt(ep, value, true);
}
/**
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index b2a540b43f97..b9ddf0c1ffe5 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -112,7 +112,7 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
cfgno, inum, asnum, ep->desc.bEndpointAddress);
ep->ss_ep_comp.bmAttributes = 16;
} else if (usb_endpoint_xfer_isoc(&ep->desc) &&
- desc->bmAttributes > 2) {
+ USB_SS_MULT(desc->bmAttributes) > 3) {
dev_warn(ddev, "Isoc endpoint has Mult of %d in "
"config %d interface %d altsetting %d ep %d: "
"setting to 3\n", desc->bmAttributes + 1,
@@ -121,7 +121,8 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
}
if (usb_endpoint_xfer_isoc(&ep->desc))
- max_tx = (desc->bMaxBurst + 1) * (desc->bmAttributes + 1) *
+ max_tx = (desc->bMaxBurst + 1) *
+ (USB_SS_MULT(desc->bmAttributes)) *
usb_endpoint_maxp(&ep->desc);
else if (usb_endpoint_xfer_int(&ep->desc))
max_tx = usb_endpoint_maxp(&ep->desc) *
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index a5a1b7c45743..22e9606d8e08 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -514,8 +514,6 @@ static int dwc3_omap_probe(struct platform_device *pdev)
goto err1;
}
- dwc3_omap_enable_irqs(omap);
-
ret = dwc3_omap_extcon_register(omap);
if (ret < 0)
goto err2;
@@ -526,6 +524,8 @@ static int dwc3_omap_probe(struct platform_device *pdev)
goto err3;
}
+ dwc3_omap_enable_irqs(omap);
+
return 0;
err3:
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 0c25704dcb6b..1e8bdf817811 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2665,8 +2665,6 @@ static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
int i;
irqreturn_t ret = IRQ_NONE;
- spin_lock(&dwc->lock);
-
for (i = 0; i < dwc->num_event_buffers; i++) {
irqreturn_t status;
@@ -2675,8 +2673,6 @@ static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
ret = status;
}
- spin_unlock(&dwc->lock);
-
return ret;
}
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 978435a51038..6399c106a3a5 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -186,6 +186,7 @@ void usb_ep_autoconfig_reset (struct usb_gadget *gadget)
list_for_each_entry (ep, &gadget->ep_list, ep_list) {
ep->claimed = false;
+ ep->driver_data = NULL;
}
gadget->in_epnum = 0;
gadget->out_epnum = 0;
diff --git a/drivers/usb/gadget/udc/amd5536udc.c b/drivers/usb/gadget/udc/amd5536udc.c
index fdacddb18c00..175ca93fe5e2 100644
--- a/drivers/usb/gadget/udc/amd5536udc.c
+++ b/drivers/usb/gadget/udc/amd5536udc.c
@@ -3138,8 +3138,8 @@ static void udc_pci_remove(struct pci_dev *pdev)
writel(AMD_BIT(UDC_DEVCFG_SOFTRESET), &dev->regs->cfg);
if (dev->irq_registered)
free_irq(pdev->irq, dev);
- if (dev->regs)
- iounmap(dev->regs);
+ if (dev->virt_addr)
+ iounmap(dev->virt_addr);
if (dev->mem_region)
release_mem_region(pci_resource_start(pdev, 0),
pci_resource_len(pdev, 0));
@@ -3226,17 +3226,13 @@ static int udc_pci_probe(
/* init */
dev = kzalloc(sizeof(struct udc), GFP_KERNEL);
- if (!dev) {
- retval = -ENOMEM;
- goto finished;
- }
+ if (!dev)
+ return -ENOMEM;
/* pci setup */
if (pci_enable_device(pdev) < 0) {
- kfree(dev);
- dev = NULL;
retval = -ENODEV;
- goto finished;
+ goto err_pcidev;
}
dev->active = 1;
@@ -3246,28 +3242,22 @@ static int udc_pci_probe(
if (!request_mem_region(resource, len, name)) {
dev_dbg(&pdev->dev, "pci device used already\n");
- kfree(dev);
- dev = NULL;
retval = -EBUSY;
- goto finished;
+ goto err_memreg;
}
dev->mem_region = 1;
dev->virt_addr = ioremap_nocache(resource, len);
if (dev->virt_addr == NULL) {
dev_dbg(&pdev->dev, "start address cannot be mapped\n");
- kfree(dev);
- dev = NULL;
retval = -EFAULT;
- goto finished;
+ goto err_ioremap;
}
if (!pdev->irq) {
dev_err(&pdev->dev, "irq not set\n");
- kfree(dev);
- dev = NULL;
retval = -ENODEV;
- goto finished;
+ goto err_irq;
}
spin_lock_init(&dev->lock);
@@ -3283,10 +3273,8 @@ static int udc_pci_probe(
if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) {
dev_dbg(&pdev->dev, "request_irq(%d) fail\n", pdev->irq);
- kfree(dev);
- dev = NULL;
retval = -EBUSY;
- goto finished;
+ goto err_irq;
}
dev->irq_registered = 1;
@@ -3314,8 +3302,17 @@ static int udc_pci_probe(
return 0;
finished:
- if (dev)
- udc_pci_remove(pdev);
+ udc_pci_remove(pdev);
+ return retval;
+
+err_irq:
+ iounmap(dev->virt_addr);
+err_ioremap:
+ release_mem_region(resource, len);
+err_memreg:
+ pci_disable_device(pdev);
+err_pcidev:
+ kfree(dev);
return retval;
}
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 3dfada8d6061..f0f2b066ac08 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -2002,6 +2002,17 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
ep->udc = udc;
INIT_LIST_HEAD(&ep->queue);
+ if (ep->index == 0) {
+ ep->ep.caps.type_control = true;
+ } else {
+ ep->ep.caps.type_iso = ep->can_isoc;
+ ep->ep.caps.type_bulk = true;
+ ep->ep.caps.type_int = true;
+ }
+
+ ep->ep.caps.dir_in = true;
+ ep->ep.caps.dir_out = true;
+
if (i)
list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c
index 5c8f4effb62a..ccb9c213cc9f 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_core.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
@@ -324,8 +324,7 @@ static void bdc_mem_free(struct bdc *bdc)
bdc->scratchpad.buff, bdc->scratchpad.sp_dma);
/* Destroy the dma pools */
- if (bdc->bd_table_pool)
- dma_pool_destroy(bdc->bd_table_pool);
+ dma_pool_destroy(bdc->bd_table_pool);
/* Free the bdc_ep array */
kfree(bdc->bdc_ep_array);
diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index 1379ad40d864..27af0f008b57 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -1348,6 +1348,7 @@ static int transfer(struct dummy_hcd *dum_hcd, struct urb *urb,
{
struct dummy *dum = dum_hcd->dum;
struct dummy_request *req;
+ int sent = 0;
top:
/* if there's no request queued, the device is NAKing; return */
@@ -1385,12 +1386,15 @@ top:
if (len == 0)
break;
- /* use an extra pass for the final short packet */
- if (len > ep->ep.maxpacket) {
- rescan = 1;
- len -= (len % ep->ep.maxpacket);
+ /* send multiple of maxpacket first, then remainder */
+ if (len >= ep->ep.maxpacket) {
+ is_short = 0;
+ if (len % ep->ep.maxpacket)
+ rescan = 1;
+ len -= len % ep->ep.maxpacket;
+ } else {
+ is_short = 1;
}
- is_short = (len % ep->ep.maxpacket) != 0;
len = dummy_perform_transfer(urb, req, len);
@@ -1399,6 +1403,7 @@ top:
req->req.status = len;
} else {
limit -= len;
+ sent += len;
urb->actual_length += len;
req->req.actual += len;
}
@@ -1421,7 +1426,7 @@ top:
*status = -EOVERFLOW;
else
*status = 0;
- } else if (!to_host) {
+ } else {
*status = 0;
if (host_len > dev_len)
req->req.status = -EOVERFLOW;
@@ -1429,15 +1434,24 @@ top:
req->req.status = 0;
}
- /* many requests terminate without a short packet */
+ /*
+ * many requests terminate without a short packet.
+ * send a zlp if demanded by flags.
+ */
} else {
- if (req->req.length == req->req.actual
- && !req->req.zero)
- req->req.status = 0;
- if (urb->transfer_buffer_length == urb->actual_length
- && !(urb->transfer_flags
- & URB_ZERO_PACKET))
- *status = 0;
+ if (req->req.length == req->req.actual) {
+ if (req->req.zero && to_host)
+ rescan = 1;
+ else
+ req->req.status = 0;
+ }
+ if (urb->transfer_buffer_length == urb->actual_length) {
+ if (urb->transfer_flags & URB_ZERO_PACKET &&
+ !to_host)
+ rescan = 1;
+ else
+ *status = 0;
+ }
}
/* device side completion --> continuable */
@@ -1460,7 +1474,7 @@ top:
if (rescan)
goto top;
}
- return limit;
+ return sent;
}
static int periodic_bytes(struct dummy *dum, struct dummy_ep *ep)
@@ -1890,7 +1904,7 @@ restart:
default:
treat_control_like_bulk:
ep->last_io = jiffies;
- total = transfer(dum_hcd, urb, ep, limit, &status);
+ total -= transfer(dum_hcd, urb, ep, limit, &status);
break;
}
diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c
index 8aa2593c2c36..b9429bc42511 100644
--- a/drivers/usb/gadget/udc/gr_udc.c
+++ b/drivers/usb/gadget/udc/gr_udc.c
@@ -2117,8 +2117,7 @@ static int gr_remove(struct platform_device *pdev)
return -EBUSY;
gr_dfs_delete(dev);
- if (dev->desc_pool)
- dma_pool_destroy(dev->desc_pool);
+ dma_pool_destroy(dev->desc_pool);
platform_set_drvdata(pdev, NULL);
gr_free_request(&dev->epi[0].ep, &dev->ep0reqi->req);
diff --git a/drivers/usb/gadget/udc/mv_u3d_core.c b/drivers/usb/gadget/udc/mv_u3d_core.c
index 4c489692745e..dafe74eb9ade 100644
--- a/drivers/usb/gadget/udc/mv_u3d_core.c
+++ b/drivers/usb/gadget/udc/mv_u3d_core.c
@@ -1767,8 +1767,7 @@ static int mv_u3d_remove(struct platform_device *dev)
usb_del_gadget_udc(&u3d->gadget);
/* free memory allocated in probe */
- if (u3d->trb_pool)
- dma_pool_destroy(u3d->trb_pool);
+ dma_pool_destroy(u3d->trb_pool);
if (u3d->ep_context)
dma_free_coherent(&dev->dev, u3d->ep_context_size,
diff --git a/drivers/usb/gadget/udc/mv_udc_core.c b/drivers/usb/gadget/udc/mv_udc_core.c
index 339af51df57d..81b6229c7805 100644
--- a/drivers/usb/gadget/udc/mv_udc_core.c
+++ b/drivers/usb/gadget/udc/mv_udc_core.c
@@ -2100,8 +2100,7 @@ static int mv_udc_remove(struct platform_device *pdev)
}
/* free memory allocated in probe */
- if (udc->dtd_pool)
- dma_pool_destroy(udc->dtd_pool);
+ dma_pool_destroy(udc->dtd_pool);
if (udc->ep_dqh)
dma_free_coherent(&pdev->dev, udc->ep_dqh_size,
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 9a8c936cd42c..41f841fa6c4d 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1498,10 +1498,10 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
* use Event Data TRBs, and we don't chain in a link TRB on short
* transfers, we're basically dividing by 1.
*
- * xHCI 1.0 specification indicates that the Average TRB Length should
- * be set to 8 for control endpoints.
+ * xHCI 1.0 and 1.1 specification indicates that the Average TRB Length
+ * should be set to 8 for control endpoints.
*/
- if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version == 0x100)
+ if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version >= 0x100)
ep_ctx->tx_info |= cpu_to_le32(AVG_TRB_LENGTH_FOR_EP(8));
else
ep_ctx->tx_info |=
@@ -1792,8 +1792,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
int size;
int i, j, num_ports;
- if (timer_pending(&xhci->cmd_timer))
- del_timer_sync(&xhci->cmd_timer);
+ del_timer_sync(&xhci->cmd_timer);
/* Free the Event Ring Segment Table and the actual Event Ring */
size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
@@ -2321,6 +2320,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
INIT_LIST_HEAD(&xhci->cmd_list);
+ /* init command timeout timer */
+ setup_timer(&xhci->cmd_timer, xhci_handle_command_timeout,
+ (unsigned long)xhci);
+
page_size = readl(&xhci->op_regs->page_size);
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Supported page size register = 0x%x", page_size);
@@ -2505,10 +2508,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
"Wrote ERST address to ir_set 0.");
xhci_print_ir_set(xhci, 0);
- /* init command timeout timer */
- setup_timer(&xhci->cmd_timer, xhci_handle_command_timeout,
- (unsigned long)xhci);
-
/*
* XXX: Might need to set the Interrupter Moderation Register to
* something other than the default (~1ms minimum between interrupts).
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 5590eac2b22d..c79d33676672 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -180,51 +180,6 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
"QUIRK: Resetting on resume");
}
-/*
- * In some Intel xHCI controllers, in order to get D3 working,
- * through a vendor specific SSIC CONFIG register at offset 0x883c,
- * SSIC PORT need to be marked as "unused" before putting xHCI
- * into D3. After D3 exit, the SSIC port need to be marked as "used".
- * Without this change, xHCI might not enter D3 state.
- * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
- * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
- */
-static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend)
-{
- struct xhci_hcd *xhci = hcd_to_xhci(hcd);
- struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
- u32 val;
- void __iomem *reg;
-
- if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
- pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {
-
- reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2;
-
- /* Notify SSIC that SSIC profile programming is not done */
- val = readl(reg) & ~PROG_DONE;
- writel(val, reg);
-
- /* Mark SSIC port as unused(suspend) or used(resume) */
- val = readl(reg);
- if (suspend)
- val |= SSIC_PORT_UNUSED;
- else
- val &= ~SSIC_PORT_UNUSED;
- writel(val, reg);
-
- /* Notify SSIC that SSIC profile programming is done */
- val = readl(reg) | PROG_DONE;
- writel(val, reg);
- readl(reg);
- }
-
- reg = (void __iomem *) xhci->cap_regs + 0x80a4;
- val = readl(reg);
- writel(val | BIT(28), reg);
- readl(reg);
-}
-
#ifdef CONFIG_ACPI
static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev)
{
@@ -345,6 +300,51 @@ static void xhci_pci_remove(struct pci_dev *dev)
}
#ifdef CONFIG_PM
+/*
+ * In some Intel xHCI controllers, in order to get D3 working,
+ * through a vendor specific SSIC CONFIG register at offset 0x883c,
+ * SSIC PORT need to be marked as "unused" before putting xHCI
+ * into D3. After D3 exit, the SSIC port need to be marked as "used".
+ * Without this change, xHCI might not enter D3 state.
+ * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
+ * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
+ */
+static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+ u32 val;
+ void __iomem *reg;
+
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+ pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {
+
+ reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2;
+
+ /* Notify SSIC that SSIC profile programming is not done */
+ val = readl(reg) & ~PROG_DONE;
+ writel(val, reg);
+
+ /* Mark SSIC port as unused(suspend) or used(resume) */
+ val = readl(reg);
+ if (suspend)
+ val |= SSIC_PORT_UNUSED;
+ else
+ val &= ~SSIC_PORT_UNUSED;
+ writel(val, reg);
+
+ /* Notify SSIC that SSIC profile programming is done */
+ val = readl(reg) | PROG_DONE;
+ writel(val, reg);
+ readl(reg);
+ }
+
+ reg = (void __iomem *) xhci->cap_regs + 0x80a4;
+ val = readl(reg);
+ writel(val | BIT(28), reg);
+ readl(reg);
+}
+
static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index a47a1e897086..43291f93afeb 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -302,6 +302,15 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
ret = xhci_handshake(&xhci->op_regs->cmd_ring,
CMD_RING_RUNNING, 0, 5 * 1000 * 1000);
if (ret < 0) {
+ /* we are about to kill xhci, give it one more chance */
+ xhci_write_64(xhci, temp_64 | CMD_RING_ABORT,
+ &xhci->op_regs->cmd_ring);
+ udelay(1000);
+ ret = xhci_handshake(&xhci->op_regs->cmd_ring,
+ CMD_RING_RUNNING, 0, 3 * 1000 * 1000);
+ if (ret == 0)
+ return 0;
+
xhci_err(xhci, "Stopped the command ring failed, "
"maybe the host is dead\n");
xhci->xhc_state |= XHCI_STATE_DYING;
@@ -3461,8 +3470,8 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
if (start_cycle == 0)
field |= 0x1;
- /* xHCI 1.0 6.4.1.2.1: Transfer Type field */
- if (xhci->hci_version == 0x100) {
+ /* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */
+ if (xhci->hci_version >= 0x100) {
if (urb->transfer_buffer_length > 0) {
if (setup->bRequestType & USB_DIR_IN)
field |= TRB_TX_TYPE(TRB_DATA_IN);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 6b0f4a47e402..9957bd96d4bc 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -146,7 +146,8 @@ static int xhci_start(struct xhci_hcd *xhci)
"waited %u microseconds.\n",
XHCI_MAX_HALT_USEC);
if (!ret)
- xhci->xhc_state &= ~XHCI_STATE_HALTED;
+ xhci->xhc_state &= ~(XHCI_STATE_HALTED | XHCI_STATE_DYING);
+
return ret;
}
@@ -654,15 +655,6 @@ int xhci_run(struct usb_hcd *hcd)
}
EXPORT_SYMBOL_GPL(xhci_run);
-static void xhci_only_stop_hcd(struct usb_hcd *hcd)
-{
- struct xhci_hcd *xhci = hcd_to_xhci(hcd);
-
- spin_lock_irq(&xhci->lock);
- xhci_halt(xhci);
- spin_unlock_irq(&xhci->lock);
-}
-
/*
* Stop xHCI driver.
*
@@ -677,12 +669,14 @@ void xhci_stop(struct usb_hcd *hcd)
u32 temp;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
- if (!usb_hcd_is_primary_hcd(hcd)) {
- xhci_only_stop_hcd(xhci->shared_hcd);
+ if (xhci->xhc_state & XHCI_STATE_HALTED)
return;
- }
+ mutex_lock(&xhci->mutex);
spin_lock_irq(&xhci->lock);
+ xhci->xhc_state |= XHCI_STATE_HALTED;
+ xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
+
/* Make sure the xHC is halted for a USB3 roothub
* (xhci_stop() could be called as part of failed init).
*/
@@ -717,6 +711,7 @@ void xhci_stop(struct usb_hcd *hcd)
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"xhci_stop completed - status = %x",
readl(&xhci->op_regs->status));
+ mutex_unlock(&xhci->mutex);
}
/*
@@ -3793,6 +3788,9 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
mutex_lock(&xhci->mutex);
+ if (xhci->xhc_state) /* dying or halted */
+ goto out;
+
if (!udev->slot_id) {
xhci_dbg_trace(xhci, trace_xhci_dbg_address,
"Bad Slot ID %d", udev->slot_id);
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 514a6cdaeff6..4a518ff12310 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1051,6 +1051,7 @@ void musb_start(struct musb *musb)
* (c) peripheral initiates, using SRP
*/
if (musb->port_mode != MUSB_PORT_MODE_HOST &&
+ musb->xceiv->otg->state != OTG_STATE_A_WAIT_BCON &&
(devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {
musb->is_active = 1;
} else {
@@ -2448,6 +2449,9 @@ static int musb_suspend(struct device *dev)
struct musb *musb = dev_to_musb(dev);
unsigned long flags;
+ musb_platform_disable(musb);
+ musb_generic_disable(musb);
+
spin_lock_irqsave(&musb->lock, flags);
if (is_peripheral_active(musb)) {
@@ -2501,6 +2505,9 @@ static int musb_resume(struct device *dev)
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
+
+ musb_start(musb);
+
return 0;
}
diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index d07cafb7d5f5..e499b862a946 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -551,6 +551,9 @@ static int cppi41_dma_channel_abort(struct dma_channel *channel)
} else {
cppi41_set_autoreq_mode(cppi41_channel, EP_MODE_AUTOREQ_NONE);
+ /* delay to drain to cppi dma pipeline for isoch */
+ udelay(250);
+
csr = musb_readw(epio, MUSB_RXCSR);
csr &= ~(MUSB_RXCSR_H_REQPKT | MUSB_RXCSR_DMAENAB);
musb_writew(epio, MUSB_RXCSR, csr);
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index a0cfead6150f..84512d1d5eee 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -225,8 +225,11 @@ static void dsps_musb_enable(struct musb *musb)
dsps_writel(reg_base, wrp->epintr_set, epmask);
dsps_writel(reg_base, wrp->coreintr_set, coremask);
- /* start polling for ID change. */
- mod_timer(&glue->timer, jiffies + msecs_to_jiffies(wrp->poll_timeout));
+ /* start polling for ID change in dual-role idle mode */
+ if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
+ musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
+ mod_timer(&glue->timer, jiffies +
+ msecs_to_jiffies(wrp->poll_timeout));
dsps_musb_try_idle(musb, 0);
}
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index 39168fe9b406..b2685e75a683 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -379,6 +379,8 @@ static const struct of_device_id ux500_match[] = {
{}
};
+MODULE_DEVICE_TABLE(of, ux500_match);
+
static struct platform_driver ux500_driver = {
.probe = ux500_probe,
.remove = ux500_remove,
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 7d3beee2a587..173132416170 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -155,7 +155,7 @@ config USB_MSM_OTG
config USB_QCOM_8X16_PHY
tristate "Qualcomm APQ8016/MSM8916 on-chip USB PHY controller support"
depends on ARCH_QCOM || COMPILE_TEST
- depends on RESET_CONTROLLER
+ depends on RESET_CONTROLLER && EXTCON
select USB_PHY
select USB_ULPI_VIEWPORT
help
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index ec6ecd03269c..5320cb8642cb 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -232,7 +232,8 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
clk_rate = pdata->clk_rate;
needs_vcc = pdata->needs_vcc;
if (gpio_is_valid(pdata->gpio_reset)) {
- err = devm_gpio_request_one(dev, pdata->gpio_reset, 0,
+ err = devm_gpio_request_one(dev, pdata->gpio_reset,
+ GPIOF_ACTIVE_LOW,
dev_name(dev));
if (!err)
nop->gpiod_reset =
diff --git a/drivers/usb/phy/phy-isp1301.c b/drivers/usb/phy/phy-isp1301.c
index 8a55b37d1a02..db68156568e6 100644
--- a/drivers/usb/phy/phy-isp1301.c
+++ b/drivers/usb/phy/phy-isp1301.c
@@ -31,6 +31,7 @@ static const struct i2c_device_id isp1301_id[] = {
{ "isp1301", 0 },
{ }
};
+MODULE_DEVICE_TABLE(i2c, isp1301_id);
static struct i2c_client *isp1301_i2c_client;
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 6d1941a2396a..6956c4f62216 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -278,6 +278,10 @@ static void option_instat_callback(struct urb *urb);
#define ZTE_PRODUCT_MF622 0x0001
#define ZTE_PRODUCT_MF628 0x0015
#define ZTE_PRODUCT_MF626 0x0031
+#define ZTE_PRODUCT_ZM8620_X 0x0396
+#define ZTE_PRODUCT_ME3620_MBIM 0x0426
+#define ZTE_PRODUCT_ME3620_X 0x1432
+#define ZTE_PRODUCT_ME3620_L 0x1433
#define ZTE_PRODUCT_AC2726 0xfff1
#define ZTE_PRODUCT_MG880 0xfffd
#define ZTE_PRODUCT_CDMA_TECH 0xfffe
@@ -544,6 +548,18 @@ static const struct option_blacklist_info zte_mc2716_z_blacklist = {
.sendsetup = BIT(1) | BIT(2) | BIT(3),
};
+static const struct option_blacklist_info zte_me3620_mbim_blacklist = {
+ .reserved = BIT(2) | BIT(3) | BIT(4),
+};
+
+static const struct option_blacklist_info zte_me3620_xl_blacklist = {
+ .reserved = BIT(3) | BIT(4) | BIT(5),
+};
+
+static const struct option_blacklist_info zte_zm8620_x_blacklist = {
+ .reserved = BIT(3) | BIT(4) | BIT(5),
+};
+
static const struct option_blacklist_info huawei_cdc12_blacklist = {
.reserved = BIT(1) | BIT(2),
};
@@ -1591,6 +1607,14 @@ static const struct usb_device_id option_ids[] = {
.driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
+ { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_L),
+ .driver_info = (kernel_ulong_t)&zte_me3620_xl_blacklist },
+ { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_MBIM),
+ .driver_info = (kernel_ulong_t)&zte_me3620_mbim_blacklist },
+ { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_X),
+ .driver_info = (kernel_ulong_t)&zte_me3620_xl_blacklist },
+ { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ZM8620_X),
+ .driver_info = (kernel_ulong_t)&zte_zm8620_x_blacklist },
{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 6c3734d2b45a..d3ea90bef84d 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -80,6 +80,8 @@ static int whiteheat_firmware_download(struct usb_serial *serial,
static int whiteheat_firmware_attach(struct usb_serial *serial);
/* function prototypes for the Connect Tech WhiteHEAT serial converter */
+static int whiteheat_probe(struct usb_serial *serial,
+ const struct usb_device_id *id);
static int whiteheat_attach(struct usb_serial *serial);
static void whiteheat_release(struct usb_serial *serial);
static int whiteheat_port_probe(struct usb_serial_port *port);
@@ -116,6 +118,7 @@ static struct usb_serial_driver whiteheat_device = {
.description = "Connect Tech - WhiteHEAT",
.id_table = id_table_std,
.num_ports = 4,
+ .probe = whiteheat_probe,
.attach = whiteheat_attach,
.release = whiteheat_release,
.port_probe = whiteheat_port_probe,
@@ -217,6 +220,34 @@ static int whiteheat_firmware_attach(struct usb_serial *serial)
/*****************************************************************************
* Connect Tech's White Heat serial driver functions
*****************************************************************************/
+
+static int whiteheat_probe(struct usb_serial *serial,
+ const struct usb_device_id *id)
+{
+ struct usb_host_interface *iface_desc;
+ struct usb_endpoint_descriptor *endpoint;
+ size_t num_bulk_in = 0;
+ size_t num_bulk_out = 0;
+ size_t min_num_bulk;
+ unsigned int i;
+
+ iface_desc = serial->interface->cur_altsetting;
+
+ for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
+ endpoint = &iface_desc->endpoint[i].desc;
+ if (usb_endpoint_is_bulk_in(endpoint))
+ ++num_bulk_in;
+ if (usb_endpoint_is_bulk_out(endpoint))
+ ++num_bulk_out;
+ }
+
+ min_num_bulk = COMMAND_PORT + 1;
+ if (num_bulk_in < min_num_bulk || num_bulk_out < min_num_bulk)
+ return -ENODEV;
+
+ return 0;
+}
+
static int whiteheat_attach(struct usb_serial *serial)
{
struct usb_serial_port *command_port;