summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/regulator/Kconfig2
-rw-r--r--drivers/regulator/twl-regulator.c116
-rw-r--r--include/linux/i2c/twl.h34
3 files changed, 130 insertions, 22 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index bcbb161bde0b..7cfdd65bebb4 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -70,7 +70,7 @@ config REGULATOR_MAX1586
for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
config REGULATOR_TWL4030
- bool "TI TWL4030/TWL5030/TPS695x0 PMIC"
+ bool "TI TWL4030/TWL5030/TWL6030/TPS695x0 PMIC"
depends on TWL4030_CORE
help
This driver supports the voltage regulators provided by
diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index 8e1b68a20ef0..7ea1c3a31081 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -52,27 +52,38 @@ struct twlreg_info {
* The first three registers of all power resource banks help hardware to
* manage the various resource groups.
*/
+/* Common offset in TWL4030/6030 */
#define VREG_GRP 0
+/* TWL4030 register offsets */
#define VREG_TYPE 1
#define VREG_REMAP 2
#define VREG_DEDICATED 3 /* LDO control */
-
+/* TWL6030 register offsets */
+#define VREG_TRANS 1
+#define VREG_STATE 2
+#define VREG_VOLTAGE 3
+/* TWL6030 Misc register offsets */
+#define VREG_BC_ALL 1
+#define VREG_BC_REF 2
+#define VREG_BC_PROC 3
+#define VREG_BC_CLK_RST 4
static inline int
-twlreg_read(struct twlreg_info *info, unsigned offset)
+twlreg_read(struct twlreg_info *info, unsigned slave_subgp, unsigned offset)
{
u8 value;
int status;
- status = twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER,
+ status = twl_i2c_read_u8(slave_subgp,
&value, info->base + offset);
return (status < 0) ? status : value;
}
static inline int
-twlreg_write(struct twlreg_info *info, unsigned offset, u8 value)
+twlreg_write(struct twlreg_info *info, unsigned slave_subgp, unsigned offset,
+ u8 value)
{
- return twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER,
+ return twl_i2c_write_u8(slave_subgp,
value, info->base + offset);
}
@@ -82,17 +93,22 @@ twlreg_write(struct twlreg_info *info, unsigned offset, u8 value)
static int twlreg_grp(struct regulator_dev *rdev)
{
- return twlreg_read(rdev_get_drvdata(rdev), VREG_GRP);
+ return twlreg_read(rdev_get_drvdata(rdev), TWL_MODULE_PM_RECEIVER,
+ VREG_GRP);
}
/*
* Enable/disable regulators by joining/leaving the P1 (processor) group.
* We assume nobody else is updating the DEV_GRP registers.
*/
-
-#define P3_GRP BIT(7) /* "peripherals" */
-#define P2_GRP BIT(6) /* secondary processor, modem, etc */
-#define P1_GRP BIT(5) /* CPU/Linux */
+/* definition for 4030 family */
+#define P3_GRP_4030 BIT(7) /* "peripherals" */
+#define P2_GRP_4030 BIT(6) /* secondary processor, modem, etc */
+#define P1_GRP_4030 BIT(5) /* CPU/Linux */
+/* definition for 6030 family */
+#define P3_GRP_6030 BIT(2) /* secondary processor, modem, etc */
+#define P2_GRP_6030 BIT(1) /* "peripherals" */
+#define P1_GRP_6030 BIT(0) /* CPU/Linux */
static int twlreg_is_enabled(struct regulator_dev *rdev)
{
@@ -101,7 +117,11 @@ static int twlreg_is_enabled(struct regulator_dev *rdev)
if (state < 0)
return state;
- return (state & P1_GRP) != 0;
+ if (twl_class_is_4030())
+ state &= P1_GRP_4030;
+ else
+ state &= P1_GRP_6030;
+ return state;
}
static int twlreg_enable(struct regulator_dev *rdev)
@@ -109,12 +129,16 @@ static int twlreg_enable(struct regulator_dev *rdev)
struct twlreg_info *info = rdev_get_drvdata(rdev);
int grp;
- grp = twlreg_read(info, VREG_GRP);
+ grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
if (grp < 0)
return grp;
- grp |= P1_GRP;
- return twlreg_write(info, VREG_GRP, grp);
+ if (twl_class_is_4030())
+ grp |= P1_GRP_4030;
+ else
+ grp |= P1_GRP_6030;
+
+ return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp);
}
static int twlreg_disable(struct regulator_dev *rdev)
@@ -122,18 +146,25 @@ static int twlreg_disable(struct regulator_dev *rdev)
struct twlreg_info *info = rdev_get_drvdata(rdev);
int grp;
- grp = twlreg_read(info, VREG_GRP);
+ grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
if (grp < 0)
return grp;
- grp &= ~P1_GRP;
- return twlreg_write(info, VREG_GRP, grp);
+ if (twl_class_is_4030())
+ grp &= ~P1_GRP_4030;
+ else
+ grp &= ~P1_GRP_6030;
+
+ return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp);
}
static int twlreg_get_status(struct regulator_dev *rdev)
{
int state = twlreg_grp(rdev);
+ if (twl_class_is_6030())
+ return 0; /* FIXME return for 6030 regulator */
+
if (state < 0)
return state;
state &= 0x0f;
@@ -152,6 +183,9 @@ static int twlreg_set_mode(struct regulator_dev *rdev, unsigned mode)
unsigned message;
int status;
+ if (twl_class_is_6030())
+ return 0; /* FIXME return for 6030 regulator */
+
/* We can only set the mode through state machine commands... */
switch (mode) {
case REGULATOR_MODE_NORMAL:
@@ -168,7 +202,7 @@ static int twlreg_set_mode(struct regulator_dev *rdev, unsigned mode)
status = twlreg_grp(rdev);
if (status < 0)
return status;
- if (!(status & (P3_GRP | P2_GRP | P1_GRP)))
+ if (!(status & (P3_GRP_4030 | P2_GRP_4030 | P1_GRP_4030)))
return -EACCES;
status = twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
@@ -260,7 +294,29 @@ static const u16 VSIM_VSEL_table[] = {
static const u16 VDAC_VSEL_table[] = {
1200, 1300, 1800, 1800,
};
-
+static const u16 VAUX1_6030_VSEL_table[] = {
+ 1000, 1300, 1800, 2500,
+ 2800, 2900, 3000, 3000,
+};
+static const u16 VAUX2_6030_VSEL_table[] = {
+ 1200, 1800, 2500, 2750,
+ 2800, 2800, 2800, 2800,
+};
+static const u16 VAUX3_6030_VSEL_table[] = {
+ 1000, 1200, 1300, 1800,
+ 2500, 2800, 3000, 3000,
+};
+static const u16 VMMC_VSEL_table[] = {
+ 1200, 1800, 2800, 2900,
+ 3000, 3000, 3000, 3000,
+};
+static const u16 VPP_VSEL_table[] = {
+ 1800, 1900, 2000, 2100,
+ 2200, 2300, 2400, 2500,
+};
+static const u16 VUSIM_VSEL_table[] = {
+ 1200, 1800, 2500, 2900,
+};
static int twlldo_list_voltage(struct regulator_dev *rdev, unsigned index)
{
@@ -288,7 +344,8 @@ twlldo_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV)
/* use the first in-range value */
if (min_uV <= uV && uV <= max_uV)
- return twlreg_write(info, VREG_DEDICATED, vsel);
+ return twlreg_write(info, TWL_MODULE_PM_RECEIVER,
+ VREG_VOLTAGE, vsel);
}
return -EDOM;
@@ -297,7 +354,8 @@ twlldo_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV)
static int twlldo_get_voltage(struct regulator_dev *rdev)
{
struct twlreg_info *info = rdev_get_drvdata(rdev);
- int vsel = twlreg_read(info, VREG_DEDICATED);
+ int vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER,
+ VREG_VOLTAGE);
if (vsel < 0)
return vsel;
@@ -360,6 +418,10 @@ static struct regulator_ops twlfixed_ops = {
TWL_ADJUSTABLE_LDO(label, offset, num, TWL4030)
#define TWL4030_FIXED_LDO(label, offset, mVolts, num) \
TWL_FIXED_LDO(label, offset, mVolts, num, TWL4030)
+#define TWL6030_ADJUSTABLE_LDO(label, offset, num) \
+ TWL_ADJUSTABLE_LDO(label, offset, num, TWL6030)
+#define TWL6030_FIXED_LDO(label, offset, mVolts, num) \
+ TWL_FIXED_LDO(label, offset, mVolts, num, TWL6030)
#define TWL_ADJUSTABLE_LDO(label, offset, num, family) { \
.base = offset, \
@@ -420,6 +482,18 @@ static struct twlreg_info twl_regs[] = {
TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18),
TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19),
/* VUSBCP is managed *only* by the USB subchip */
+
+ /* 6030 REG with base as PMC Slave Misc : 0x0030 */
+ TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54, 1),
+ TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58, 2),
+ TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c, 3),
+ TWL6030_ADJUSTABLE_LDO(VMMC, 0x68, 4),
+ TWL6030_ADJUSTABLE_LDO(VPP, 0x6c, 5),
+ TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74, 7),
+ TWL6030_FIXED_LDO(VANA, 0x50, 2100, 15),
+ TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 16),
+ TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 17),
+ TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 18)
};
static int twlreg_probe(struct platform_device *pdev)
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index 8e7405d9c624..7679e87df177 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -427,6 +427,12 @@ int twl6030_interrupt_mask(u8 bit_mask, u8 offset);
#define MSG_SINGULAR(devgrp, id, state) \
((devgrp) << 13 | 0 << 12 | (id) << 4 | (state))
+#define MSG_BROADCAST_ALL(devgrp, state) \
+ ((devgrp) << 5 | (state))
+
+#define MSG_BROADCAST_REF MSG_BROADCAST_ALL
+#define MSG_BROADCAST_PROV MSG_BROADCAST_ALL
+#define MSG_BROADCAST__CLK_RST MSG_BROADCAST_ALL
/*----------------------------------------------------------------------*/
struct twl4030_clock_init_data {
@@ -602,6 +608,7 @@ int twl4030_sih_setup(int module);
* VIO is generally fixed.
*/
+/* TWL4030 SMPS/LDO's */
/* EXTERNAL dc-to-dc buck converters */
#define TWL4030_REG_VDD1 0
#define TWL4030_REG_VDD2 1
@@ -628,4 +635,31 @@ int twl4030_sih_setup(int module);
#define TWL4030_REG_VUSB1V8 18
#define TWL4030_REG_VUSB3V1 19
+/* TWL6030 SMPS/LDO's */
+/* EXTERNAL dc-to-dc buck convertor contollable via SR */
+#define TWL6030_REG_VDD1 30
+#define TWL6030_REG_VDD2 31
+#define TWL6030_REG_VDD3 32
+
+/* Non SR compliant dc-to-dc buck convertors */
+#define TWL6030_REG_VMEM 33
+#define TWL6030_REG_V2V1 34
+#define TWL6030_REG_V1V29 35
+#define TWL6030_REG_V1V8 36
+
+/* EXTERNAL LDOs */
+#define TWL6030_REG_VAUX1_6030 37
+#define TWL6030_REG_VAUX2_6030 38
+#define TWL6030_REG_VAUX3_6030 39
+#define TWL6030_REG_VMMC 40
+#define TWL6030_REG_VPP 41
+#define TWL6030_REG_VUSIM 42
+#define TWL6030_REG_VANA 43
+#define TWL6030_REG_VCXIO 44
+#define TWL6030_REG_VDAC 45
+#define TWL6030_REG_VUSB 46
+
+/* INTERNAL LDOs */
+#define TWL6030_REG_VRTC 47
+
#endif /* End of __TWL4030_H */