summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/arc/archs-pct.txt17
-rw-r--r--MAINTAINERS3
-rw-r--r--arch/arc/Kconfig2
-rw-r--r--arch/arc/boot/dts/axc003.dtsi13
-rw-r--r--arch/arc/include/asm/arcregs.h1
-rw-r--r--arch/arc/include/asm/cache.h8
-rw-r--r--arch/arc/include/asm/cmpxchg.h22
-rw-r--r--arch/arc/include/asm/futex.h72
-rw-r--r--arch/arc/include/asm/perf_event.h23
-rw-r--r--arch/arc/kernel/entry-arcv2.S9
-rw-r--r--arch/arc/kernel/entry.S6
-rw-r--r--arch/arc/kernel/perf_event.c275
-rw-r--r--arch/arc/kernel/process.c2
-rw-r--r--arch/arc/kernel/unaligned.c6
-rw-r--r--arch/arc/mm/cache.c184
-rw-r--r--arch/arc/mm/dma.c18
-rw-r--r--arch/arc/plat-axs10x/axs10x.c2
17 files changed, 524 insertions, 139 deletions
diff --git a/Documentation/devicetree/bindings/arc/archs-pct.txt b/Documentation/devicetree/bindings/arc/archs-pct.txt
new file mode 100644
index 000000000000..1ae98b87c640
--- /dev/null
+++ b/Documentation/devicetree/bindings/arc/archs-pct.txt
@@ -0,0 +1,17 @@
+* ARC HS Performance Counters
+
+The ARC HS can be configured with a pipeline performance monitor for counting
+CPU and cache events like cache misses and hits. Like conventional PCT there
+are 100+ hardware conditions dynamically mapped to upto 32 counters.
+It also supports overflow interrupts.
+
+Required properties:
+
+- compatible : should contain
+ "snps,archs-pct"
+
+Example:
+
+pmu {
+ compatible = "snps,archs-pct";
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 963233fc721b..4be50b79914e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9911,8 +9911,9 @@ SYNOPSYS ARC ARCHITECTURE
M: Vineet Gupta <vgupta@synopsys.com>
S: Supported
F: arch/arc/
-F: Documentation/devicetree/bindings/arc/
+F: Documentation/devicetree/bindings/arc/*
F: drivers/tty/serial/arc_uart.c
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc.git
SYNOPSYS ARC SDP platform support
M: Alexey Brodkin <abrodkin@synopsys.com>
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index bd4670d1b89b..78c0621d5819 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -8,6 +8,7 @@
config ARC
def_bool y
+ select ARCH_SUPPORTS_ATOMIC_RMW if ARC_HAS_LLSC
select BUILDTIME_EXTABLE_SORT
select COMMON_CLK
select CLONE_BACKWARDS
@@ -22,6 +23,7 @@ config ARC
select GENERIC_SMP_IDLE_THREAD
select HAVE_ARCH_KGDB
select HAVE_ARCH_TRACEHOOK
+ select HAVE_FUTEX_CMPXCHG
select HAVE_IOREMAP_PROT
select HAVE_KPROBES
select HAVE_KRETPROBES
diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi
index 1cd5e82f5dc2..846481f37eef 100644
--- a/arch/arc/boot/dts/axc003.dtsi
+++ b/arch/arc/boot/dts/axc003.dtsi
@@ -72,12 +72,13 @@
};
/*
- * This INTC is actually connected to DW APB GPIO
- * which acts as a wire between MB INTC and CPU INTC.
- * GPIO INTC is configured in platform init code
- * and here we mimic direct connection from MB INTC to
- * CPU INTC, thus we set "interrupts = <7>" instead of
- * "interrupts = <12>"
+ * The DW APB ICTL intc on MB is connected to CPU intc via a
+ * DT "invisible" DW APB GPIO block, configured to simply pass thru
+ * interrupts - setup accordinly in platform init (plat-axs10x/ax10x.c)
+ *
+ * So here we mimic a direct connection betwen them, ignoring the
+ * ABPG GPIO. Thus set "interrupts = <24>" (DW APB GPIO to core)
+ * instead of "interrupts = <12>" (DW APB ICTL to DW APB GPIO)
*
* This intc actually resides on MB, but we move it here to
* avoid duplicating the MB dtsi file given that IRQ from
diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h
index c8f57b8449dc..d8023bc8d1ad 100644
--- a/arch/arc/include/asm/arcregs.h
+++ b/arch/arc/include/asm/arcregs.h
@@ -35,6 +35,7 @@
#define ARC_REG_RTT_BCR 0xF2
#define ARC_REG_IRQ_BCR 0xF3
#define ARC_REG_SMART_BCR 0xFF
+#define ARC_REG_CLUSTER_BCR 0xcf
/* status32 Bits Positions */
#define STATUS_AE_BIT 5 /* Exception active */
diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h
index d67345d3e2d4..e23ea6e7633a 100644
--- a/arch/arc/include/asm/cache.h
+++ b/arch/arc/include/asm/cache.h
@@ -53,6 +53,8 @@ extern void arc_cache_init(void);
extern char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len);
extern void read_decode_cache_bcr(void);
+extern int ioc_exists;
+
#endif /* !__ASSEMBLY__ */
/* Instruction cache related Auxiliary registers */
@@ -94,4 +96,10 @@ extern void read_decode_cache_bcr(void);
#define SLC_CTRL_BUSY 0x100
#define SLC_CTRL_RGN_OP_INV 0x200
+/* IO coherency related Auxiliary registers */
+#define ARC_REG_IO_COH_ENABLE 0x500
+#define ARC_REG_IO_COH_PARTIAL 0x501
+#define ARC_REG_IO_COH_AP0_BASE 0x508
+#define ARC_REG_IO_COH_AP0_SIZE 0x509
+
#endif /* _ASM_CACHE_H */
diff --git a/arch/arc/include/asm/cmpxchg.h b/arch/arc/include/asm/cmpxchg.h
index 44fd531f4d7b..af7a2db139c9 100644
--- a/arch/arc/include/asm/cmpxchg.h
+++ b/arch/arc/include/asm/cmpxchg.h
@@ -110,18 +110,18 @@ static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
sizeof(*(ptr))))
/*
- * On ARC700, EX insn is inherently atomic, so by default "vanilla" xchg() need
- * not require any locking. However there's a quirk.
- * ARC lacks native CMPXCHG, thus emulated (see above), using external locking -
- * incidently it "reuses" the same atomic_ops_lock used by atomic APIs.
- * Now, llist code uses cmpxchg() and xchg() on same data, so xchg() needs to
- * abide by same serializing rules, thus ends up using atomic_ops_lock as well.
+ * xchg() maps directly to ARC EX instruction which guarantees atomicity.
+ * However in !LLSC config, it also needs to be use @atomic_ops_lock spinlock
+ * due to a subtle reason:
+ * - For !LLSC, cmpxchg() needs to use that lock (see above) and there is lot
+ * of kernel code which calls xchg()/cmpxchg() on same data (see llist.h)
+ * Hence xchg() needs to follow same locking rules.
*
- * This however is only relevant if SMP and/or ARC lacks LLSC
- * if (UP or LLSC)
- * xchg doesn't need serialization
- * else <==> !(UP or LLSC) <==> (!UP and !LLSC) <==> (SMP and !LLSC)
- * xchg needs serialization
+ * Technically the lock is also needed for UP (boils down to irq save/restore)
+ * but we can cheat a bit since cmpxchg() atomic_ops_lock() would cause irqs to
+ * be disabled thus can't possibly be interrpted/preempted/clobbered by xchg()
+ * Other way around, xchg is one instruction anyways, so can't be interrupted
+ * as such
*/
#if !defined(CONFIG_ARC_HAS_LLSC) && defined(CONFIG_SMP)
diff --git a/arch/arc/include/asm/futex.h b/arch/arc/include/asm/futex.h
index 70cfe16b742d..11e1b1f3acda 100644
--- a/arch/arc/include/asm/futex.h
+++ b/arch/arc/include/asm/futex.h
@@ -20,6 +20,7 @@
#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)\
\
+ smp_mb(); \
__asm__ __volatile__( \
"1: llock %1, [%2] \n" \
insn "\n" \
@@ -30,7 +31,7 @@
" .section .fixup,\"ax\" \n" \
" .align 4 \n" \
"4: mov %0, %4 \n" \
- " b 3b \n" \
+ " j 3b \n" \
" .previous \n" \
" .section __ex_table,\"a\" \n" \
" .align 4 \n" \
@@ -40,12 +41,14 @@
\
: "=&r" (ret), "=&r" (oldval) \
: "r" (uaddr), "r" (oparg), "ir" (-EFAULT) \
- : "cc", "memory")
+ : "cc", "memory"); \
+ smp_mb() \
#else /* !CONFIG_ARC_HAS_LLSC */
#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)\
\
+ smp_mb(); \
__asm__ __volatile__( \
"1: ld %1, [%2] \n" \
insn "\n" \
@@ -55,7 +58,7 @@
" .section .fixup,\"ax\" \n" \
" .align 4 \n" \
"4: mov %0, %4 \n" \
- " b 3b \n" \
+ " j 3b \n" \
" .previous \n" \
" .section __ex_table,\"a\" \n" \
" .align 4 \n" \
@@ -65,7 +68,8 @@
\
: "=&r" (ret), "=&r" (oldval) \
: "r" (uaddr), "r" (oparg), "ir" (-EFAULT) \
- : "cc", "memory")
+ : "cc", "memory"); \
+ smp_mb() \
#endif
@@ -83,6 +87,9 @@ static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
return -EFAULT;
+#ifndef CONFIG_ARC_HAS_LLSC
+ preempt_disable(); /* to guarantee atomic r-m-w of futex op */
+#endif
pagefault_disable();
switch (op) {
@@ -90,6 +97,7 @@ static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
__futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_ADD:
+ /* oldval = *uaddr; *uaddr += oparg ; ret = *uaddr */
__futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_OR:
@@ -106,6 +114,9 @@ static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
}
pagefault_enable();
+#ifndef CONFIG_ARC_HAS_LLSC
+ preempt_enable();
+#endif
if (!ret) {
switch (cmp) {
@@ -134,54 +145,57 @@ static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
return ret;
}
-/* Compare-xchg with pagefaults disabled.
- * Notes:
- * -Best-Effort: Exchg happens only if compare succeeds.
- * If compare fails, returns; leaving retry/looping to upper layers
- * -successful cmp-xchg: return orig value in @addr (same as cmp val)
- * -Compare fails: return orig value in @addr
- * -user access r/w fails: return -EFAULT
+/*
+ * cmpxchg of futex (pagefaults disabled by caller)
+ * Return 0 for success, -EFAULT otherwise
*/
static inline int
-futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, u32 oldval,
- u32 newval)
+futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, u32 expval,
+ u32 newval)
{
- u32 val;
+ int ret = 0;
+ u32 existval;
- if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
return -EFAULT;
- pagefault_disable();
+#ifndef CONFIG_ARC_HAS_LLSC
+ preempt_disable(); /* to guarantee atomic r-m-w of futex op */
+#endif
+ smp_mb();
__asm__ __volatile__(
#ifdef CONFIG_ARC_HAS_LLSC
- "1: llock %0, [%3] \n"
- " brne %0, %1, 3f \n"
- "2: scond %2, [%3] \n"
+ "1: llock %1, [%4] \n"
+ " brne %1, %2, 3f \n"
+ "2: scond %3, [%4] \n"
" bnz 1b \n"
#else
- "1: ld %0, [%3] \n"
- " brne %0, %1, 3f \n"
- "2: st %2, [%3] \n"
+ "1: ld %1, [%4] \n"
+ " brne %1, %2, 3f \n"
+ "2: st %3, [%4] \n"
#endif
"3: \n"
" .section .fixup,\"ax\" \n"
- "4: mov %0, %4 \n"
- " b 3b \n"
+ "4: mov %0, %5 \n"
+ " j 3b \n"
" .previous \n"
" .section __ex_table,\"a\" \n"
" .align 4 \n"
" .word 1b, 4b \n"
" .word 2b, 4b \n"
" .previous\n"
- : "=&r"(val)
- : "r"(oldval), "r"(newval), "r"(uaddr), "ir"(-EFAULT)
+ : "+&r"(ret), "=&r"(existval)
+ : "r"(expval), "r"(newval), "r"(uaddr), "ir"(-EFAULT)
: "cc", "memory");
- pagefault_enable();
+ smp_mb();
- *uval = val;
- return val;
+#ifndef CONFIG_ARC_HAS_LLSC
+ preempt_enable();
+#endif
+ *uval = existval;
+ return ret;
}
#endif
diff --git a/arch/arc/include/asm/perf_event.h b/arch/arc/include/asm/perf_event.h
index 2b8880e953a2..5f071762fb1c 100644
--- a/arch/arc/include/asm/perf_event.h
+++ b/arch/arc/include/asm/perf_event.h
@@ -1,6 +1,7 @@
/*
* Linux performance counter support for ARC
*
+ * Copyright (C) 2014-2015 Synopsys, Inc. (www.synopsys.com)
* Copyright (C) 2011-2013 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
@@ -12,8 +13,8 @@
#ifndef __ASM_PERF_EVENT_H
#define __ASM_PERF_EVENT_H
-/* real maximum varies per CPU, this is the maximum supported by the driver */
-#define ARC_PMU_MAX_HWEVENTS 64
+/* Max number of counters that PCT block may ever have */
+#define ARC_PERF_MAX_COUNTERS 32
#define ARC_REG_CC_BUILD 0xF6
#define ARC_REG_CC_INDEX 0x240
@@ -28,15 +29,22 @@
#define ARC_REG_PCT_CONFIG 0x254
#define ARC_REG_PCT_CONTROL 0x255
#define ARC_REG_PCT_INDEX 0x256
+#define ARC_REG_PCT_INT_CNTL 0x25C
+#define ARC_REG_PCT_INT_CNTH 0x25D
+#define ARC_REG_PCT_INT_CTRL 0x25E
+#define ARC_REG_PCT_INT_ACT 0x25F
+
+#define ARC_REG_PCT_CONFIG_USER (1 << 18) /* count in user mode */
+#define ARC_REG_PCT_CONFIG_KERN (1 << 19) /* count in kernel mode */
#define ARC_REG_PCT_CONTROL_CC (1 << 16) /* clear counts */
#define ARC_REG_PCT_CONTROL_SN (1 << 17) /* snapshot */
struct arc_reg_pct_build {
#ifdef CONFIG_CPU_BIG_ENDIAN
- unsigned int m:8, c:8, r:6, s:2, v:8;
+ unsigned int m:8, c:8, r:5, i:1, s:2, v:8;
#else
- unsigned int v:8, s:2, r:6, c:8, m:8;
+ unsigned int v:8, s:2, i:1, r:5, c:8, m:8;
#endif
};
@@ -95,10 +103,13 @@ static const char * const arc_pmu_ev_hw_map[] = {
/* counts condition */
[PERF_COUNT_HW_INSTRUCTIONS] = "iall",
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmp",
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmp", /* Excludes ZOL jumps */
[PERF_COUNT_ARC_BPOK] = "bpok", /* NP-NT, PT-T, PNT-NT */
+#ifdef CONFIG_ISA_ARCV2
+ [PERF_COUNT_HW_BRANCH_MISSES] = "bpmp",
+#else
[PERF_COUNT_HW_BRANCH_MISSES] = "bpfail", /* NP-T, PT-NT, PNT-T */
-
+#endif
[PERF_COUNT_ARC_LDC] = "imemrdc", /* Instr: mem read cached */
[PERF_COUNT_ARC_STC] = "imemwrc", /* Instr: mem write cached */
diff --git a/arch/arc/kernel/entry-arcv2.S b/arch/arc/kernel/entry-arcv2.S
index bd7105d3172f..8fa76567e402 100644
--- a/arch/arc/kernel/entry-arcv2.S
+++ b/arch/arc/kernel/entry-arcv2.S
@@ -57,13 +57,8 @@ VECTOR handle_interrupt ; (23) End of fixed IRQs
.section .text, "ax",@progbits
-res_service: ; processor restart
- flag 0x1 ; not implemented
- nop
- nop
-
-reserved: ; processor restart
- rtie ; jump to processor initializations
+reserved:
+ flag 1 ; Unexpected event, halt
;##################### Interrupt Handling ##############################
diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S
index f7a82fd4d601..589abf5172d6 100644
--- a/arch/arc/kernel/entry.S
+++ b/arch/arc/kernel/entry.S
@@ -42,7 +42,7 @@ ENTRY(ret_from_fork)
; when the forked child comes here from the __switch_to function
; r0 has the last task pointer.
; put last task in scheduler queue
- bl @schedule_tail
+ jl @schedule_tail
ld r9, [sp, PT_status32]
brne r9, 0, 1f
@@ -320,7 +320,7 @@ resume_user_mode_begin:
; --- (Slow Path #1) task preemption ---
bbit0 r9, TIF_NEED_RESCHED, .Lchk_pend_signals
mov blink, resume_user_mode_begin ; tail-call to U mode ret chks
- b @schedule ; BTST+Bnz causes relo error in link
+ j @schedule ; BTST+Bnz causes relo error in link
.Lchk_pend_signals:
IRQ_ENABLE r10
@@ -381,7 +381,7 @@ resume_kernel_mode:
bbit0 r9, TIF_NEED_RESCHED, .Lrestore_regs
; Invoke PREEMPTION
- bl preempt_schedule_irq
+ jl preempt_schedule_irq
; preempt_schedule_irq() always returns with IRQ disabled
#endif
diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c
index 1287388c258a..0c08bb1ce15a 100644
--- a/arch/arc/kernel/perf_event.c
+++ b/arch/arc/kernel/perf_event.c
@@ -1,7 +1,7 @@
/*
* Linux performance counter support for ARC700 series
*
- * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
+ * Copyright (C) 2013-2015 Synopsys, Inc. (www.synopsys.com)
*
* This code is inspired by the perf support of various other architectures.
*
@@ -11,6 +11,7 @@
*
*/
#include <linux/errno.h>
+#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/perf_event.h>
@@ -20,12 +21,25 @@
struct arc_pmu {
struct pmu pmu;
- int counter_size; /* in bits */
+ unsigned int irq;
int n_counters;
- unsigned long used_mask[BITS_TO_LONGS(ARC_PMU_MAX_HWEVENTS)];
+ u64 max_period;
int ev_hw_idx[PERF_COUNT_ARC_HW_MAX];
};
+struct arc_pmu_cpu {
+ /*
+ * A 1 bit for an index indicates that the counter is being used for
+ * an event. A 0 means that the counter can be used.
+ */
+ unsigned long used_mask[BITS_TO_LONGS(ARC_PERF_MAX_COUNTERS)];
+
+ /*
+ * The events that are active on the PMU for the given index.
+ */
+ struct perf_event *act_counter[ARC_PERF_MAX_COUNTERS];
+};
+
struct arc_callchain_trace {
int depth;
void *perf_stuff;
@@ -65,6 +79,7 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
}
static struct arc_pmu *arc_pmu;
+static DEFINE_PER_CPU(struct arc_pmu_cpu, arc_pmu_cpu);
/* read counter #idx; note that counter# != event# on ARC! */
static uint64_t arc_pmu_read_counter(int idx)
@@ -88,18 +103,15 @@ static uint64_t arc_pmu_read_counter(int idx)
static void arc_perf_event_update(struct perf_event *event,
struct hw_perf_event *hwc, int idx)
{
- uint64_t prev_raw_count, new_raw_count;
- int64_t delta;
-
- do {
- prev_raw_count = local64_read(&hwc->prev_count);
- new_raw_count = arc_pmu_read_counter(idx);
- } while (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
- new_raw_count) != prev_raw_count);
-
- delta = (new_raw_count - prev_raw_count) &
- ((1ULL << arc_pmu->counter_size) - 1ULL);
+ uint64_t prev_raw_count = local64_read(&hwc->prev_count);
+ uint64_t new_raw_count = arc_pmu_read_counter(idx);
+ int64_t delta = new_raw_count - prev_raw_count;
+ /*
+ * We don't afaraid of hwc->prev_count changing beneath our feet
+ * because there's no way for us to re-enter this function anytime.
+ */
+ local64_set(&hwc->prev_count, new_raw_count);
local64_add(delta, &event->count);
local64_sub(delta, &hwc->period_left);
}
@@ -142,22 +154,41 @@ static int arc_pmu_event_init(struct perf_event *event)
struct hw_perf_event *hwc = &event->hw;
int ret;
+ if (!is_sampling_event(event)) {
+ hwc->sample_period = arc_pmu->max_period;
+ hwc->last_period = hwc->sample_period;
+ local64_set(&hwc->period_left, hwc->sample_period);
+ }
+
+ hwc->config = 0;
+
+ if (is_isa_arcv2()) {
+ /* "exclude user" means "count only kernel" */
+ if (event->attr.exclude_user)
+ hwc->config |= ARC_REG_PCT_CONFIG_KERN;
+
+ /* "exclude kernel" means "count only user" */
+ if (event->attr.exclude_kernel)
+ hwc->config |= ARC_REG_PCT_CONFIG_USER;
+ }
+
switch (event->attr.type) {
case PERF_TYPE_HARDWARE:
if (event->attr.config >= PERF_COUNT_HW_MAX)
return -ENOENT;
if (arc_pmu->ev_hw_idx[event->attr.config] < 0)
return -ENOENT;
- hwc->config = arc_pmu->ev_hw_idx[event->attr.config];
+ hwc->config |= arc_pmu->ev_hw_idx[event->attr.config];
pr_debug("init event %d with h/w %d \'%s\'\n",
(int) event->attr.config, (int) hwc->config,
arc_pmu_ev_hw_map[event->attr.config]);
return 0;
+
case PERF_TYPE_HW_CACHE:
ret = arc_pmu_cache_event(event->attr.config);
if (ret < 0)
return ret;
- hwc->config = arc_pmu->ev_hw_idx[ret];
+ hwc->config |= arc_pmu->ev_hw_idx[ret];
return 0;
default:
return -ENOENT;
@@ -180,6 +211,47 @@ static void arc_pmu_disable(struct pmu *pmu)
write_aux_reg(ARC_REG_PCT_CONTROL, (tmp & 0xffff0000) | 0x0);
}
+static int arc_pmu_event_set_period(struct perf_event *event)
+{
+ struct hw_perf_event *hwc = &event->hw;
+ s64 left = local64_read(&hwc->period_left);
+ s64 period = hwc->sample_period;
+ int idx = hwc->idx;
+ int overflow = 0;
+ u64 value;
+
+ if (unlikely(left <= -period)) {
+ /* left underflowed by more than period. */
+ left = period;
+ local64_set(&hwc->period_left, left);
+ hwc->last_period = period;
+ overflow = 1;
+ } else if (unlikely(left <= 0)) {
+ /* left underflowed by less than period. */
+ left += period;
+ local64_set(&hwc->period_left, left);
+ hwc->last_period = period;
+ overflow = 1;
+ }
+
+ if (left > arc_pmu->max_period)
+ left = arc_pmu->max_period;
+
+ value = arc_pmu->max_period - left;
+ local64_set(&hwc->prev_count, value);
+
+ /* Select counter */
+ write_aux_reg(ARC_REG_PCT_INDEX, idx);
+
+ /* Write value */
+ write_aux_reg(ARC_REG_PCT_COUNTL, (u32)value);
+ write_aux_reg(ARC_REG_PCT_COUNTH, (value >> 32));
+
+ perf_event_update_userpage(event);
+
+ return overflow;
+}
+
/*
* Assigns hardware counter to hardware condition.
* Note that there is no separate start/stop mechanism;
@@ -194,13 +266,20 @@ static void arc_pmu_start(struct perf_event *event, int flags)
return;
if (flags & PERF_EF_RELOAD)
- WARN_ON_ONCE(!(event->hw.state & PERF_HES_UPTODATE));
+ WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
+
+ hwc->state = 0;
- event->hw.state = 0;
+ arc_pmu_event_set_period(event);
+
+ /* Enable interrupt for this counter */
+ if (is_sampling_event(event))
+ write_aux_reg(ARC_REG_PCT_INT_CTRL,
+ read_aux_reg(ARC_REG_PCT_INT_CTRL) | (1 << idx));
/* enable ARC pmu here */
- write_aux_reg(ARC_REG_PCT_INDEX, idx);
- write_aux_reg(ARC_REG_PCT_CONFIG, hwc->config);
+ write_aux_reg(ARC_REG_PCT_INDEX, idx); /* counter # */
+ write_aux_reg(ARC_REG_PCT_CONFIG, hwc->config); /* condition */
}
static void arc_pmu_stop(struct perf_event *event, int flags)
@@ -208,6 +287,17 @@ static void arc_pmu_stop(struct perf_event *event, int flags)
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
+ /* Disable interrupt for this counter */
+ if (is_sampling_event(event)) {
+ /*
+ * Reset interrupt flag by writing of 1. This is required
+ * to make sure pending interrupt was not left.
+ */
+ write_aux_reg(ARC_REG_PCT_INT_ACT, 1 << idx);
+ write_aux_reg(ARC_REG_PCT_INT_CTRL,
+ read_aux_reg(ARC_REG_PCT_INT_CTRL) & ~(1 << idx));
+ }
+
if (!(event->hw.state & PERF_HES_STOPPED)) {
/* stop ARC pmu here */
write_aux_reg(ARC_REG_PCT_INDEX, idx);
@@ -227,8 +317,12 @@ static void arc_pmu_stop(struct perf_event *event, int flags)
static void arc_pmu_del(struct perf_event *event, int flags)
{
+ struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu);
+
arc_pmu_stop(event, PERF_EF_UPDATE);
- __clear_bit(event->hw.idx, arc_pmu->used_mask);
+ __clear_bit(event->hw.idx, pmu_cpu->used_mask);
+
+ pmu_cpu->act_counter[event->hw.idx] = 0;
perf_event_update_userpage(event);
}
@@ -236,20 +330,31 @@ static void arc_pmu_del(struct perf_event *event, int flags)
/* allocate hardware counter and optionally start counting */
static int arc_pmu_add(struct perf_event *event, int flags)
{
+ struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu);
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
- if (__test_and_set_bit(idx, arc_pmu->used_mask)) {
- idx = find_first_zero_bit(arc_pmu->used_mask,
+ if (__test_and_set_bit(idx, pmu_cpu->used_mask)) {
+ idx = find_first_zero_bit(pmu_cpu->used_mask,
arc_pmu->n_counters);
if (idx == arc_pmu->n_counters)
return -EAGAIN;
- __set_bit(idx, arc_pmu->used_mask);
+ __set_bit(idx, pmu_cpu->used_mask);
hwc->idx = idx;
}
write_aux_reg(ARC_REG_PCT_INDEX, idx);
+
+ pmu_cpu->act_counter[idx] = event;
+
+ if (is_sampling_event(event)) {
+ /* Mimic full counter overflow as other arches do */
+ write_aux_reg(ARC_REG_PCT_INT_CNTL, (u32)arc_pmu->max_period);
+ write_aux_reg(ARC_REG_PCT_INT_CNTH,
+ (arc_pmu->max_period >> 32));
+ }
+
write_aux_reg(ARC_REG_PCT_CONFIG, 0);
write_aux_reg(ARC_REG_PCT_COUNTL, 0);
write_aux_reg(ARC_REG_PCT_COUNTH, 0);
@@ -264,11 +369,82 @@ static int arc_pmu_add(struct perf_event *event, int flags)
return 0;
}
+#ifdef CONFIG_ISA_ARCV2
+static irqreturn_t arc_pmu_intr(int irq, void *dev)
+{
+ struct perf_sample_data data;
+ struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu);
+ struct pt_regs *regs;
+ int active_ints;
+ int idx;
+
+ arc_pmu_disable(&arc_pmu->pmu);
+
+ active_ints = read_aux_reg(ARC_REG_PCT_INT_ACT);
+
+ regs = get_irq_regs();
+
+ for (idx = 0; idx < arc_pmu->n_counters; idx++) {
+ struct perf_event *event = pmu_cpu->act_counter[idx];
+ struct hw_perf_event *hwc;
+
+ if (!(active_ints & (1 << idx)))
+ continue;
+
+ /* Reset interrupt flag by writing of 1 */
+ write_aux_reg(ARC_REG_PCT_INT_ACT, 1 << idx);
+
+ /*
+ * On reset of "interrupt active" bit corresponding
+ * "interrupt enable" bit gets automatically reset as well.
+ * Now we need to re-enable interrupt for the counter.
+ */
+ write_aux_reg(ARC_REG_PCT_INT_CTRL,
+ read_aux_reg(ARC_REG_PCT_INT_CTRL) | (1 << idx));
+
+ hwc = &event->hw;
+
+ WARN_ON_ONCE(hwc->idx != idx);
+
+ arc_perf_event_update(event, &event->hw, event->hw.idx);
+ perf_sample_data_init(&data, 0, hwc->last_period);
+ if (!arc_pmu_event_set_period(event))
+ continue;
+
+ if (perf_event_overflow(event, &data, regs))
+ arc_pmu_stop(event, 0);
+ }
+
+ arc_pmu_enable(&arc_pmu->pmu);
+
+ return IRQ_HANDLED;
+}
+#else
+
+static irqreturn_t arc_pmu_intr(int irq, void *dev)
+{
+ return IRQ_NONE;
+}
+
+#endif /* CONFIG_ISA_ARCV2 */
+
+void arc_cpu_pmu_irq_init(void)
+{
+ struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu);
+
+ arc_request_percpu_irq(arc_pmu->irq, smp_processor_id(), arc_pmu_intr,
+ "ARC perf counters", pmu_cpu);
+
+ /* Clear all pending interrupt flags */
+ write_aux_reg(ARC_REG_PCT_INT_ACT, 0xffffffff);
+}
+
static int arc_pmu_device_probe(struct platform_device *pdev)
{
struct arc_reg_pct_build pct_bcr;
struct arc_reg_cc_build cc_bcr;
- int i, j;
+ int i, j, has_interrupts;
+ int counter_size; /* in bits */
union cc_name {
struct {
@@ -284,7 +460,7 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
pr_err("This core does not have performance counters!\n");
return -ENODEV;
}
- BUG_ON(pct_bcr.c > ARC_PMU_MAX_HWEVENTS);
+ BUG_ON(pct_bcr.c > ARC_PERF_MAX_COUNTERS);
READ_BCR(ARC_REG_CC_BUILD, cc_bcr);
BUG_ON(!cc_bcr.v); /* Counters exist but No countable conditions ? */
@@ -293,11 +469,16 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
if (!arc_pmu)
return -ENOMEM;
+ has_interrupts = is_isa_arcv2() ? pct_bcr.i : 0;
+
arc_pmu->n_counters = pct_bcr.c;
- arc_pmu->counter_size = 32 + (pct_bcr.s << 4);
+ counter_size = 32 + (pct_bcr.s << 4);
- pr_info("ARC perf\t: %d counters (%d bits), %d countable conditions\n",
- arc_pmu->n_counters, arc_pmu->counter_size, cc_bcr.c);
+ arc_pmu->max_period = (1ULL << counter_size) / 2 - 1ULL;
+
+ pr_info("ARC perf\t: %d counters (%d bits), %d conditions%s\n",
+ arc_pmu->n_counters, counter_size, cc_bcr.c,
+ has_interrupts ? ", [overflow IRQ support]":"");
cc_name.str[8] = 0;
for (i = 0; i < PERF_COUNT_ARC_HW_MAX; i++)
@@ -332,8 +513,37 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
.read = arc_pmu_read,
};
- /* ARC 700 PMU does not support sampling events */
- arc_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
+ if (has_interrupts) {
+ int irq = platform_get_irq(pdev, 0);
+ unsigned long flags;
+
+ if (irq < 0) {
+ pr_err("Cannot get IRQ number for the platform\n");
+ return -ENODEV;
+ }
+
+ arc_pmu->irq = irq;
+
+ /*
+ * arc_cpu_pmu_irq_init() needs to be called on all cores for
+ * their respective local PMU.
+ * However we use opencoded on_each_cpu() to ensure it is called
+ * on core0 first, so that arc_request_percpu_irq() sets up
+ * AUTOEN etc. Otherwise enable_percpu_irq() fails to enable
+ * perf IRQ on non master cores.
+ * see arc_request_percpu_irq()
+ */
+ preempt_disable();
+ local_irq_save(flags);
+ arc_cpu_pmu_irq_init();
+ local_irq_restore(flags);
+ smp_call_function((smp_call_func_t)arc_cpu_pmu_irq_init, 0, 1);
+ preempt_enable();
+
+ /* Clean all pending interrupt flags */
+ write_aux_reg(ARC_REG_PCT_INT_ACT, 0xffffffff);
+ } else
+ arc_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
return perf_pmu_register(&arc_pmu->pmu, pdev->name, PERF_TYPE_RAW);
}
@@ -341,6 +551,7 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
#ifdef CONFIG_OF
static const struct of_device_id arc_pmu_match[] = {
{ .compatible = "snps,arc700-pct" },
+ { .compatible = "snps,archs-pct" },
{},
};
MODULE_DEVICE_TABLE(of, arc_pmu_match);
@@ -348,7 +559,7 @@ MODULE_DEVICE_TABLE(of, arc_pmu_match);
static struct platform_driver arc_pmu_driver = {
.driver = {
- .name = "arc700-pct",
+ .name = "arc-pct",
.of_match_table = of_match_ptr(arc_pmu_match),
},
.probe = arc_pmu_device_probe,
diff --git a/arch/arc/kernel/process.c b/arch/arc/kernel/process.c
index 44092456776f..91d5a0f1f3f7 100644
--- a/arch/arc/kernel/process.c
+++ b/arch/arc/kernel/process.c
@@ -65,7 +65,7 @@ asmlinkage void ret_from_fork(void);
* ------------------
* | r25 | <==== top of Stack (thread.ksp)
* ~ ~
- * | --to-- | (CALLEE Regs of user mode)
+ * | --to-- | (CALLEE Regs of kernel mode)
* | r13 |
* ------------------
* | fp |
diff --git a/arch/arc/kernel/unaligned.c b/arch/arc/kernel/unaligned.c
index 74db59b6f392..abd961f3e763 100644
--- a/arch/arc/kernel/unaligned.c
+++ b/arch/arc/kernel/unaligned.c
@@ -34,7 +34,7 @@
" .section .fixup,\"ax\"\n" \
" .align 4\n" \
"3: mov %0, 1\n" \
- " b 2b\n" \
+ " j 2b\n" \
" .previous\n" \
" .section __ex_table,\"a\"\n" \
" .align 4\n" \
@@ -82,7 +82,7 @@
" .section .fixup,\"ax\"\n" \
" .align 4\n" \
"4: mov %0, 1\n" \
- " b 3b\n" \
+ " j 3b\n" \
" .previous\n" \
" .section __ex_table,\"a\"\n" \
" .align 4\n" \
@@ -113,7 +113,7 @@
" .section .fixup,\"ax\"\n" \
" .align 4\n" \
"6: mov %0, 1\n" \
- " b 5b\n" \
+ " j 5b\n" \
" .previous\n" \
" .section __ex_table,\"a\"\n" \
" .align 4\n" \
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
index 1cd6695b6ab5..0d1a6e96839f 100644
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@@ -22,15 +22,22 @@
#include <asm/setup.h>
static int l2_line_sz;
+int ioc_exists;
+volatile int slc_enable = 1, ioc_enable = 1;
void (*_cache_line_loop_ic_fn)(unsigned long paddr, unsigned long vaddr,
unsigned long sz, const int cacheop);
+void (*__dma_cache_wback_inv)(unsigned long start, unsigned long sz);
+void (*__dma_cache_inv)(unsigned long start, unsigned long sz);
+void (*__dma_cache_wback)(unsigned long start, unsigned long sz);
+
char *arc_cache_mumbojumbo(int c, char *buf, int len)
{
int n = 0;
struct cpuinfo_arc_cache *p;
+#define IS_USED_RUN(v) ((v) ? "" : "(disabled) ")
#define PR_CACHE(p, cfg, str) \
if (!(p)->ver) \
n += scnprintf(buf + n, len - n, str"\t\t: N/A\n"); \
@@ -45,10 +52,18 @@ char *arc_cache_mumbojumbo(int c, char *buf, int len)
PR_CACHE(&cpuinfo_arc700[c].icache, CONFIG_ARC_HAS_ICACHE, "I-Cache");
PR_CACHE(&cpuinfo_arc700[c].dcache, CONFIG_ARC_HAS_DCACHE, "D-Cache");
+ if (!is_isa_arcv2())
+ return buf;
+
p = &cpuinfo_arc700[c].slc;
if (p->ver)
n += scnprintf(buf + n, len - n,
- "SLC\t\t: %uK, %uB Line\n", p->sz_k, p->line_len);
+ "SLC\t\t: %uK, %uB Line%s\n",
+ p->sz_k, p->line_len, IS_USED_RUN(slc_enable));
+
+ if (ioc_exists)
+ n += scnprintf(buf + n, len - n, "IOC\t\t:%s\n",
+ IS_USED_RUN(ioc_enable));
return buf;
}
@@ -58,18 +73,9 @@ char *arc_cache_mumbojumbo(int c, char *buf, int len)
* the cpuinfo structure for later use.
* No Validation done here, simply read/convert the BCRs
*/
-void read_decode_cache_bcr(void)
+static void read_decode_cache_bcr_arcv2(int cpu)
{
- struct cpuinfo_arc_cache *p_ic, *p_dc, *p_slc;
- unsigned int cpu = smp_processor_id();
- struct bcr_cache {
-#ifdef CONFIG_CPU_BIG_ENDIAN
- unsigned int pad:12, line_len:4, sz:4, config:4, ver:8;
-#else
- unsigned int ver:8, config:4, sz:4, line_len:4, pad:12;
-#endif
- } ibcr, dbcr;
-
+ struct cpuinfo_arc_cache *p_slc = &cpuinfo_arc700[cpu].slc;
struct bcr_generic sbcr;
struct bcr_slc_cfg {
@@ -80,6 +86,39 @@ void read_decode_cache_bcr(void)
#endif
} slc_cfg;
+ struct bcr_clust_cfg {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+ unsigned int pad:7, c:1, num_entries:8, num_cores:8, ver:8;
+#else
+ unsigned int ver:8, num_cores:8, num_entries:8, c:1, pad:7;
+#endif
+ } cbcr;
+
+ READ_BCR(ARC_REG_SLC_BCR, sbcr);
+ if (sbcr.ver) {
+ READ_BCR(ARC_REG_SLC_CFG, slc_cfg);
+ p_slc->ver = sbcr.ver;
+ p_slc->sz_k = 128 << slc_cfg.sz;
+ l2_line_sz = p_slc->line_len = (slc_cfg.lsz == 0) ? 128 : 64;
+ }
+
+ READ_BCR(ARC_REG_CLUSTER_BCR, cbcr);
+ if (cbcr.c && ioc_enable)
+ ioc_exists = 1;
+}
+
+void read_decode_cache_bcr(void)
+{
+ struct cpuinfo_arc_cache *p_ic, *p_dc;
+ unsigned int cpu = smp_processor_id();
+ struct bcr_cache {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+ unsigned int pad:12, line_len:4, sz:4, config:4, ver:8;
+#else
+ unsigned int ver:8, config:4, sz:4, line_len:4, pad:12;
+#endif
+ } ibcr, dbcr;
+
p_ic = &cpuinfo_arc700[cpu].icache;
READ_BCR(ARC_REG_IC_BCR, ibcr);
@@ -122,17 +161,8 @@ dc_chk:
p_dc->ver = dbcr.ver;
slc_chk:
- if (!is_isa_arcv2())
- return;
-
- p_slc = &cpuinfo_arc700[cpu].slc;
- READ_BCR(ARC_REG_SLC_BCR, sbcr);
- if (sbcr.ver) {
- READ_BCR(ARC_REG_SLC_CFG, slc_cfg);
- p_slc->ver = sbcr.ver;
- p_slc->sz_k = 128 << slc_cfg.sz;
- l2_line_sz = p_slc->line_len = (slc_cfg.lsz == 0) ? 128 : 64;
- }
+ if (is_isa_arcv2())
+ read_decode_cache_bcr_arcv2(cpu);
}
/*
@@ -516,11 +546,6 @@ noinline void slc_op(unsigned long paddr, unsigned long sz, const int op)
#endif
}
-static inline int need_slc_flush(void)
-{
- return is_isa_arcv2() && l2_line_sz;
-}
-
/***********************************************************
* Exported APIs
*/
@@ -569,30 +594,74 @@ void flush_dcache_page(struct page *page)
}
EXPORT_SYMBOL(flush_dcache_page);
-void dma_cache_wback_inv(unsigned long start, unsigned long sz)
+/*
+ * DMA ops for systems with L1 cache only
+ * Make memory coherent with L1 cache by flushing/invalidating L1 lines
+ */
+static void __dma_cache_wback_inv_l1(unsigned long start, unsigned long sz)
{
__dc_line_op_k(start, sz, OP_FLUSH_N_INV);
+}
- if (need_slc_flush())
- slc_op(start, sz, OP_FLUSH_N_INV);
+static void __dma_cache_inv_l1(unsigned long start, unsigned long sz)
+{
+ __dc_line_op_k(start, sz, OP_INV);
}
-EXPORT_SYMBOL(dma_cache_wback_inv);
-void dma_cache_inv(unsigned long start, unsigned long sz)
+static void __dma_cache_wback_l1(unsigned long start, unsigned long sz)
+{
+ __dc_line_op_k(start, sz, OP_FLUSH);
+}
+
+/*
+ * DMA ops for systems with both L1 and L2 caches, but without IOC
+ * Both L1 and L2 lines need to be explicity flushed/invalidated
+ */
+static void __dma_cache_wback_inv_slc(unsigned long start, unsigned long sz)
+{
+ __dc_line_op_k(start, sz, OP_FLUSH_N_INV);
+ slc_op(start, sz, OP_FLUSH_N_INV);
+}
+
+static void __dma_cache_inv_slc(unsigned long start, unsigned long sz)
{
__dc_line_op_k(start, sz, OP_INV);
+ slc_op(start, sz, OP_INV);
+}
+
+static void __dma_cache_wback_slc(unsigned long start, unsigned long sz)
+{
+ __dc_line_op_k(start, sz, OP_FLUSH);
+ slc_op(start, sz, OP_FLUSH);
+}
+
+/*
+ * DMA ops for systems with IOC
+ * IOC hardware snoops all DMA traffic keeping the caches consistent with
+ * memory - eliding need for any explicit cache maintenance of DMA buffers
+ */
+static void __dma_cache_wback_inv_ioc(unsigned long start, unsigned long sz) {}
+static void __dma_cache_inv_ioc(unsigned long start, unsigned long sz) {}
+static void __dma_cache_wback_ioc(unsigned long start, unsigned long sz) {}
+
+/*
+ * Exported DMA API
+ */
+void dma_cache_wback_inv(unsigned long start, unsigned long sz)
+{
+ __dma_cache_wback_inv(start, sz);
+}
+EXPORT_SYMBOL(dma_cache_wback_inv);
- if (need_slc_flush())
- slc_op(start, sz, OP_INV);
+void dma_cache_inv(unsigned long start, unsigned long sz)
+{
+ __dma_cache_inv(start, sz);
}
EXPORT_SYMBOL(dma_cache_inv);
void dma_cache_wback(unsigned long start, unsigned long sz)
{
- __dc_line_op_k(start, sz, OP_FLUSH);
-
- if (need_slc_flush())
- slc_op(start, sz, OP_FLUSH);
+ __dma_cache_wback(start, sz);
}
EXPORT_SYMBOL(dma_cache_wback);
@@ -848,4 +917,41 @@ void arc_cache_init(void)
panic("Disable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
}
}
+
+ if (is_isa_arcv2() && l2_line_sz && !slc_enable) {
+
+ /* IM set : flush before invalidate */
+ write_aux_reg(ARC_REG_SLC_CTRL,
+ read_aux_reg(ARC_REG_SLC_CTRL) | SLC_CTRL_IM);
+
+ write_aux_reg(ARC_REG_SLC_INVALIDATE, 1);
+
+ /* Important to wait for flush to complete */
+ while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY);
+ write_aux_reg(ARC_REG_SLC_CTRL,
+ read_aux_reg(ARC_REG_SLC_CTRL) | SLC_CTRL_DISABLE);
+ }
+
+ if (is_isa_arcv2() && ioc_exists) {
+ /* IO coherency base - 0x8z */
+ write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000);
+ /* IO coherency aperture size - 512Mb: 0x8z-0xAz */
+ write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, 0x11);
+ /* Enable partial writes */
+ write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1);
+ /* Enable IO coherency */
+ write_aux_reg(ARC_REG_IO_COH_ENABLE, 1);
+
+ __dma_cache_wback_inv = __dma_cache_wback_inv_ioc;
+ __dma_cache_inv = __dma_cache_inv_ioc;
+ __dma_cache_wback = __dma_cache_wback_ioc;
+ } else if (is_isa_arcv2() && l2_line_sz && slc_enable) {
+ __dma_cache_wback_inv = __dma_cache_wback_inv_slc;
+ __dma_cache_inv = __dma_cache_inv_slc;
+ __dma_cache_wback = __dma_cache_wback_slc;
+ } else {
+ __dma_cache_wback_inv = __dma_cache_wback_inv_l1;
+ __dma_cache_inv = __dma_cache_inv_l1;
+ __dma_cache_wback = __dma_cache_wback_l1;
+ }
}
diff --git a/arch/arc/mm/dma.c b/arch/arc/mm/dma.c
index 57706a9c6948..29a46bb198cc 100644
--- a/arch/arc/mm/dma.c
+++ b/arch/arc/mm/dma.c
@@ -19,6 +19,7 @@
#include <linux/dma-mapping.h>
#include <linux/dma-debug.h>
#include <linux/export.h>
+#include <asm/cache.h>
#include <asm/cacheflush.h>
/*
@@ -53,6 +54,20 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
{
void *paddr, *kvaddr;
+ /*
+ * IOC relies on all data (even coherent DMA data) being in cache
+ * Thus allocate normal cached memory
+ *
+ * The gains with IOC are two pronged:
+ * -For streaming data, elides needs for cache maintenance, saving
+ * cycles in flush code, and bus bandwidth as all the lines of a
+ * buffer need to be flushed out to memory
+ * -For coherent data, Read/Write to buffers terminate early in cache
+ * (vs. always going to memory - thus are faster)
+ */
+ if (is_isa_arcv2() && ioc_exists)
+ return dma_alloc_noncoherent(dev, size, dma_handle, gfp);
+
/* This is linear addr (0x8000_0000 based) */
paddr = alloc_pages_exact(size, gfp);
if (!paddr)
@@ -85,6 +100,9 @@ EXPORT_SYMBOL(dma_alloc_coherent);
void dma_free_coherent(struct device *dev, size_t size, void *kvaddr,
dma_addr_t dma_handle)
{
+ if (is_isa_arcv2() && ioc_exists)
+ return dma_free_noncoherent(dev, size, kvaddr, dma_handle);
+
iounmap((void __force __iomem *)kvaddr);
free_pages_exact((void *)dma_handle, size);
diff --git a/arch/arc/plat-axs10x/axs10x.c b/arch/arc/plat-axs10x/axs10x.c
index e7769c3ab5f2..ad9825d4026a 100644
--- a/arch/arc/plat-axs10x/axs10x.c
+++ b/arch/arc/plat-axs10x/axs10x.c
@@ -46,7 +46,7 @@ static void __init axs10x_enable_gpio_intc_wire(void)
* ------------------- -------------------
* | snps,dw-apb-gpio | | snps,dw-apb-gpio |
* ------------------- -------------------
- * | |
+ * | #12 |
* | [ Debug UART on cpu card ]
* |
* ------------------------