summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/scsi/libata-core.c803
-rw-r--r--drivers/scsi/libata-eh.c2
-rw-r--r--drivers/scsi/pdc_adma.c8
-rw-r--r--drivers/scsi/sata_mv.c6
-rw-r--r--drivers/scsi/sata_nv.c4
-rw-r--r--drivers/scsi/sata_promise.c7
-rw-r--r--drivers/scsi/sata_qstor.c11
-rw-r--r--drivers/scsi/sata_sx4.c6
-rw-r--r--drivers/scsi/sata_vsc.c15
-rw-r--r--include/linux/ata.h12
-rw-r--r--include/linux/libata.h24
11 files changed, 550 insertions, 348 deletions
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 2969599ec0b9..c859b96b891a 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -1345,11 +1345,19 @@ static int ata_dev_configure(struct ata_device *dev, int print_info)
dev->cylinders, dev->heads, dev->sectors);
}
+ if (dev->id[59] & 0x100) {
+ dev->multi_count = dev->id[59] & 0xff;
+ DPRINTK("ata%u: dev %u multi count %u\n",
+ ap->id, dev->devno, dev->multi_count);
+ }
+
dev->cdb_len = 16;
}
/* ATAPI-specific feature tests */
else if (dev->class == ATA_DEV_ATAPI) {
+ char *cdb_intr_string = "";
+
rc = atapi_cdb_len(id);
if ((rc < 12) || (rc > ATAPI_CDB_LEN)) {
ata_dev_printk(dev, KERN_WARNING,
@@ -1359,10 +1367,16 @@ static int ata_dev_configure(struct ata_device *dev, int print_info)
}
dev->cdb_len = (unsigned int) rc;
+ if (ata_id_cdb_intr(dev->id)) {
+ dev->flags |= ATA_DFLAG_CDB_INTR;
+ cdb_intr_string = ", CDB intr";
+ }
+
/* print device info to dmesg */
if (print_info)
- ata_dev_printk(dev, KERN_INFO, "ATAPI, max %s\n",
- ata_mode_string(xfer_mask));
+ ata_dev_printk(dev, KERN_INFO, "ATAPI, max %s%s\n",
+ ata_mode_string(xfer_mask),
+ cdb_intr_string);
}
ap->host->max_cmd_len = 0;
@@ -3211,6 +3225,15 @@ int ata_check_atapi_dma(struct ata_queued_cmd *qc)
if (ap->ops->check_atapi_dma)
rc = ap->ops->check_atapi_dma(qc);
+ /* We don't support polling DMA.
+ * Use PIO if the LLDD handles only interrupts in
+ * the HSM_ST_LAST state and the ATAPI device
+ * generates CDB interrupts.
+ */
+ if ((ap->flags & ATA_FLAG_PIO_POLLING) &&
+ (qc->dev->flags & ATA_DFLAG_CDB_INTR))
+ rc = 1;
+
return rc;
}
/**
@@ -3458,7 +3481,6 @@ void ata_poll_qc_complete(struct ata_queued_cmd *qc)
qc = ata_qc_from_tag(ap, qc->tag);
if (qc) {
if (!(qc->err_mask & AC_ERR_HSM)) {
- ap->flags &= ~ATA_FLAG_NOINTR;
ata_irq_on(ap);
ata_qc_complete(qc);
} else
@@ -3466,7 +3488,6 @@ void ata_poll_qc_complete(struct ata_queued_cmd *qc)
}
} else {
/* old EH */
- ap->flags &= ~ATA_FLAG_NOINTR;
ata_irq_on(ap);
ata_qc_complete(qc);
}
@@ -3475,105 +3496,6 @@ void ata_poll_qc_complete(struct ata_queued_cmd *qc)
}
/**
- * ata_pio_poll - poll using PIO, depending on current state
- * @qc: qc in progress
- *
- * LOCKING:
- * None. (executing in kernel thread context)
- *
- * RETURNS:
- * timeout value to use
- */
-static unsigned long ata_pio_poll(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- u8 status;
- unsigned int poll_state = HSM_ST_UNKNOWN;
- unsigned int reg_state = HSM_ST_UNKNOWN;
-
- switch (ap->hsm_task_state) {
- case HSM_ST:
- case HSM_ST_POLL:
- poll_state = HSM_ST_POLL;
- reg_state = HSM_ST;
- break;
- case HSM_ST_LAST:
- case HSM_ST_LAST_POLL:
- poll_state = HSM_ST_LAST_POLL;
- reg_state = HSM_ST_LAST;
- break;
- default:
- BUG();
- break;
- }
-
- status = ata_chk_status(ap);
- if (status & ATA_BUSY) {
- if (time_after(jiffies, ap->pio_task_timeout)) {
- qc->err_mask |= AC_ERR_TIMEOUT;
- ap->hsm_task_state = HSM_ST_TMOUT;
- return 0;
- }
- ap->hsm_task_state = poll_state;
- return ATA_SHORT_PAUSE;
- }
-
- ap->hsm_task_state = reg_state;
- return 0;
-}
-
-/**
- * ata_pio_complete - check if drive is busy or idle
- * @qc: qc to complete
- *
- * LOCKING:
- * None. (executing in kernel thread context)
- *
- * RETURNS:
- * Non-zero if qc completed, zero otherwise.
- */
-static int ata_pio_complete(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- u8 drv_stat;
-
- /*
- * This is purely heuristic. This is a fast path. Sometimes when
- * we enter, BSY will be cleared in a chk-status or two. If not,
- * the drive is probably seeking or something. Snooze for a couple
- * msecs, then chk-status again. If still busy, fall back to
- * HSM_ST_POLL state.
- */
- drv_stat = ata_busy_wait(ap, ATA_BUSY, 10);
- if (drv_stat & ATA_BUSY) {
- msleep(2);
- drv_stat = ata_busy_wait(ap, ATA_BUSY, 10);
- if (drv_stat & ATA_BUSY) {
- ap->hsm_task_state = HSM_ST_LAST_POLL;
- ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO;
- return 0;
- }
- }
-
- drv_stat = ata_wait_idle(ap);
- if (!ata_ok(drv_stat)) {
- qc->err_mask |= __ac_err_mask(drv_stat);
- ap->hsm_task_state = HSM_ST_ERR;
- return 0;
- }
-
- ap->hsm_task_state = HSM_ST_IDLE;
-
- WARN_ON(qc->err_mask);
- ata_poll_qc_complete(qc);
-
- /* another command may start at this point */
-
- return 1;
-}
-
-
-/**
* swap_buf_le16 - swap halves of 16-bit words in place
* @buf: Buffer to swap
* @buf_words: Number of 16-bit words in buffer.
@@ -3741,7 +3663,23 @@ static void ata_pio_sector(struct ata_queued_cmd *qc)
page = nth_page(page, (offset >> PAGE_SHIFT));
offset %= PAGE_SIZE;
- buf = kmap(page) + offset;
+ DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
+
+ if (PageHighMem(page)) {
+ unsigned long flags;
+
+ local_irq_save(flags);
+ buf = kmap_atomic(page, KM_IRQ0);
+
+ /* do the actual data transfer */
+ ata_data_xfer(ap, buf + offset, ATA_SECT_SIZE, do_write);
+
+ kunmap_atomic(buf, KM_IRQ0);
+ local_irq_restore(flags);
+ } else {
+ buf = page_address(page);
+ ata_data_xfer(ap, buf + offset, ATA_SECT_SIZE, do_write);
+ }
qc->cursect++;
qc->cursg_ofs++;
@@ -3750,14 +3688,68 @@ static void ata_pio_sector(struct ata_queued_cmd *qc)
qc->cursg++;
qc->cursg_ofs = 0;
}
+}
- DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
+/**
+ * ata_pio_sectors - Transfer one or many 512-byte sectors.
+ * @qc: Command on going
+ *
+ * Transfer one or many ATA_SECT_SIZE of data from/to the
+ * ATA device for the DRQ request.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
+static void ata_pio_sectors(struct ata_queued_cmd *qc)
+{
+ if (is_multi_taskfile(&qc->tf)) {
+ /* READ/WRITE MULTIPLE */
+ unsigned int nsect;
+
+ WARN_ON(qc->dev->multi_count == 0);
+
+ nsect = min(qc->nsect - qc->cursect, qc->dev->multi_count);
+ while (nsect--)
+ ata_pio_sector(qc);
+ } else
+ ata_pio_sector(qc);
+}
+
+/**
+ * atapi_send_cdb - Write CDB bytes to hardware
+ * @ap: Port to which ATAPI device is attached.
+ * @qc: Taskfile currently active
+ *
+ * When device has indicated its readiness to accept
+ * a CDB, this function is called. Send the CDB.
+ *
+ * LOCKING:
+ * caller.
+ */
+
+static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc)
+{
+ /* send SCSI cdb */
+ DPRINTK("send cdb\n");
+ WARN_ON(qc->dev->cdb_len < 12);
- /* do the actual data transfer */
- do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
- ata_data_xfer(ap, buf, ATA_SECT_SIZE, do_write);
+ ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1);
+ ata_altstatus(ap); /* flush */
- kunmap(page);
+ switch (qc->tf.protocol) {
+ case ATA_PROT_ATAPI:
+ ap->hsm_task_state = HSM_ST;
+ break;
+ case ATA_PROT_ATAPI_NODATA:
+ ap->hsm_task_state = HSM_ST_LAST;
+ break;
+ case ATA_PROT_ATAPI_DMA:
+ ap->hsm_task_state = HSM_ST_LAST;
+ /* initiate bmdma */
+ ap->ops->bmdma_start(qc);
+ break;
+ }
}
/**
@@ -3823,7 +3815,23 @@ next_sg:
/* don't cross page boundaries */
count = min(count, (unsigned int)PAGE_SIZE - offset);
- buf = kmap(page) + offset;
+ DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
+
+ if (PageHighMem(page)) {
+ unsigned long flags;
+
+ local_irq_save(flags);
+ buf = kmap_atomic(page, KM_IRQ0);
+
+ /* do the actual data transfer */
+ ata_data_xfer(ap, buf + offset, count, do_write);
+
+ kunmap_atomic(buf, KM_IRQ0);
+ local_irq_restore(flags);
+ } else {
+ buf = page_address(page);
+ ata_data_xfer(ap, buf + offset, count, do_write);
+ }
bytes -= count;
qc->curbytes += count;
@@ -3834,13 +3842,6 @@ next_sg:
qc->cursg_ofs = 0;
}
- DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
-
- /* do the actual data transfer */
- ata_data_xfer(ap, buf, count, do_write);
-
- kunmap(page);
-
if (bytes)
goto next_sg;
}
@@ -3877,6 +3878,8 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc)
if (do_write != i_write)
goto err_out;
+ VPRINTK("ata%u: xfering %d bytes\n", ap->id, bytes);
+
__atapi_pio_bytes(qc, bytes);
return;
@@ -3888,186 +3891,294 @@ err_out:
}
/**
- * ata_pio_block - start PIO on a block
- * @qc: qc to transfer block for
+ * ata_hsm_ok_in_wq - Check if the qc can be handled in the workqueue.
+ * @ap: the target ata_port
+ * @qc: qc on going
*
- * LOCKING:
- * None. (executing in kernel thread context)
+ * RETURNS:
+ * 1 if ok in workqueue, 0 otherwise.
*/
-static void ata_pio_block(struct ata_queued_cmd *qc)
+
+static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *qc)
{
- struct ata_port *ap = qc->ap;
- u8 status;
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ return 1;
- /*
- * This is purely heuristic. This is a fast path.
- * Sometimes when we enter, BSY will be cleared in
- * a chk-status or two. If not, the drive is probably seeking
- * or something. Snooze for a couple msecs, then
- * chk-status again. If still busy, fall back to
- * HSM_ST_POLL state.
- */
- status = ata_busy_wait(ap, ATA_BUSY, 5);
- if (status & ATA_BUSY) {
- msleep(2);
- status = ata_busy_wait(ap, ATA_BUSY, 10);
- if (status & ATA_BUSY) {
- ap->hsm_task_state = HSM_ST_POLL;
- ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO;
- return;
- }
- }
+ if (ap->hsm_task_state == HSM_ST_FIRST) {
+ if (qc->tf.protocol == ATA_PROT_PIO &&
+ (qc->tf.flags & ATA_TFLAG_WRITE))
+ return 1;
- /* check error */
- if (status & (ATA_ERR | ATA_DF)) {
- qc->err_mask |= AC_ERR_DEV;
- ap->hsm_task_state = HSM_ST_ERR;
- return;
+ if (is_atapi_taskfile(&qc->tf) &&
+ !(qc->dev->flags & ATA_DFLAG_CDB_INTR))
+ return 1;
}
- /* transfer data if any */
- if (is_atapi_taskfile(&qc->tf)) {
- /* DRQ=0 means no more data to transfer */
- if ((status & ATA_DRQ) == 0) {
- ap->hsm_task_state = HSM_ST_LAST;
- return;
- }
+ return 0;
+}
- atapi_pio_bytes(qc);
- } else {
- /* handle BSY=0, DRQ=0 as error */
- if ((status & ATA_DRQ) == 0) {
+/**
+ * ata_hsm_move - move the HSM to the next state.
+ * @ap: the target ata_port
+ * @qc: qc on going
+ * @status: current device status
+ * @in_wq: 1 if called from workqueue, 0 otherwise
+ *
+ * RETURNS:
+ * 1 when poll next status needed, 0 otherwise.
+ */
+
+static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
+ u8 status, int in_wq)
+{
+ unsigned long flags = 0;
+ int poll_next;
+
+ WARN_ON((qc->flags & ATA_QCFLAG_ACTIVE) == 0);
+
+ /* Make sure ata_qc_issue_prot() does not throw things
+ * like DMA polling into the workqueue. Notice that
+ * in_wq is not equivalent to (qc->tf.flags & ATA_TFLAG_POLLING).
+ */
+ WARN_ON(in_wq != ata_hsm_ok_in_wq(ap, qc));
+
+fsm_start:
+ DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n",
+ ap->id, qc->tf.protocol, ap->hsm_task_state, status);
+
+ switch (ap->hsm_task_state) {
+ case HSM_ST_FIRST:
+ /* Send first data block or PACKET CDB */
+
+ /* If polling, we will stay in the work queue after
+ * sending the data. Otherwise, interrupt handler
+ * takes over after sending the data.
+ */
+ poll_next = (qc->tf.flags & ATA_TFLAG_POLLING);
+
+ /* check device status */
+ if (unlikely((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ)) {
+ /* Wrong status. Let EH handle this */
qc->err_mask |= AC_ERR_HSM;
ap->hsm_task_state = HSM_ST_ERR;
- return;
+ goto fsm_start;
}
- ata_pio_sector(qc);
- }
-}
+ /* Device should not ask for data transfer (DRQ=1)
+ * when it finds something wrong.
+ * We ignore DRQ here and stop the HSM by
+ * changing hsm_task_state to HSM_ST_ERR and
+ * let the EH abort the command or reset the device.
+ */
+ if (unlikely(status & (ATA_ERR | ATA_DF))) {
+ printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n",
+ ap->id, status);
+ qc->err_mask |= AC_ERR_DEV;
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
-static void ata_pio_error(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
+ /* Send the CDB (atapi) or the first data block (ata pio out).
+ * During the state transition, interrupt handler shouldn't
+ * be invoked before the data transfer is complete and
+ * hsm_task_state is changed. Hence, the following locking.
+ */
+ if (in_wq)
+ spin_lock_irqsave(&ap->host_set->lock, flags);
- if (qc->tf.command != ATA_CMD_PACKET)
- ata_dev_printk(qc->dev, KERN_WARNING, "PIO error\n");
+ if (qc->tf.protocol == ATA_PROT_PIO) {
+ /* PIO data out protocol.
+ * send first data block.
+ */
- /* make sure qc->err_mask is available to
- * know what's wrong and recover
- */
- WARN_ON(qc->err_mask == 0);
+ /* ata_pio_sectors() might change the state
+ * to HSM_ST_LAST. so, the state is changed here
+ * before ata_pio_sectors().
+ */
+ ap->hsm_task_state = HSM_ST;
+ ata_pio_sectors(qc);
+ ata_altstatus(ap); /* flush */
+ } else
+ /* send CDB */
+ atapi_send_cdb(ap, qc);
+
+ if (in_wq)
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ /* if polling, ata_pio_task() handles the rest.
+ * otherwise, interrupt handler takes over from here.
+ */
+ break;
- ap->hsm_task_state = HSM_ST_IDLE;
+ case HSM_ST:
+ /* complete command or read/write the data register */
+ if (qc->tf.protocol == ATA_PROT_ATAPI) {
+ /* ATAPI PIO protocol */
+ if ((status & ATA_DRQ) == 0) {
+ /* no more data to transfer */
+ ap->hsm_task_state = HSM_ST_LAST;
+ goto fsm_start;
+ }
- ata_poll_qc_complete(qc);
-}
+ /* Device should not ask for data transfer (DRQ=1)
+ * when it finds something wrong.
+ * We ignore DRQ here and stop the HSM by
+ * changing hsm_task_state to HSM_ST_ERR and
+ * let the EH abort the command or reset the device.
+ */
+ if (unlikely(status & (ATA_ERR | ATA_DF))) {
+ printk(KERN_WARNING "ata%d: DRQ=1 with device error, dev_stat 0x%X\n",
+ ap->id, status);
+ qc->err_mask |= AC_ERR_DEV;
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
-static void ata_pio_task(void *_data)
-{
- struct ata_queued_cmd *qc = _data;
- struct ata_port *ap = qc->ap;
- unsigned long timeout;
- int qc_completed;
+ atapi_pio_bytes(qc);
-fsm_start:
- timeout = 0;
- qc_completed = 0;
+ if (unlikely(ap->hsm_task_state == HSM_ST_ERR))
+ /* bad ireason reported by device */
+ goto fsm_start;
- switch (ap->hsm_task_state) {
- case HSM_ST_IDLE:
- return;
+ } else {
+ /* ATA PIO protocol */
+ if (unlikely((status & ATA_DRQ) == 0)) {
+ /* handle BSY=0, DRQ=0 as error */
+ qc->err_mask |= AC_ERR_HSM;
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
- case HSM_ST:
- ata_pio_block(qc);
+ /* For PIO reads, some devices may ask for
+ * data transfer (DRQ=1) alone with ERR=1.
+ * We respect DRQ here and transfer one
+ * block of junk data before changing the
+ * hsm_task_state to HSM_ST_ERR.
+ *
+ * For PIO writes, ERR=1 DRQ=1 doesn't make
+ * sense since the data block has been
+ * transferred to the device.
+ */
+ if (unlikely(status & (ATA_ERR | ATA_DF))) {
+ /* data might be corrputed */
+ qc->err_mask |= AC_ERR_DEV;
+
+ if (!(qc->tf.flags & ATA_TFLAG_WRITE)) {
+ ata_pio_sectors(qc);
+ ata_altstatus(ap);
+ status = ata_wait_idle(ap);
+ }
+
+ /* ata_pio_sectors() might change the
+ * state to HSM_ST_LAST. so, the state
+ * is changed after ata_pio_sectors().
+ */
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
+
+ ata_pio_sectors(qc);
+
+ if (ap->hsm_task_state == HSM_ST_LAST &&
+ (!(qc->tf.flags & ATA_TFLAG_WRITE))) {
+ /* all data read */
+ ata_altstatus(ap);
+ status = ata_wait_idle(ap);
+ goto fsm_start;
+ }
+ }
+
+ ata_altstatus(ap); /* flush */
+ poll_next = 1;
break;
case HSM_ST_LAST:
- qc_completed = ata_pio_complete(qc);
- break;
+ if (unlikely(!ata_ok(status))) {
+ qc->err_mask |= __ac_err_mask(status);
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
+
+ /* no more data to transfer */
+ DPRINTK("ata%u: dev %u command complete, drv_stat 0x%x\n",
+ ap->id, qc->dev->devno, status);
+
+ WARN_ON(qc->err_mask);
- case HSM_ST_POLL:
- case HSM_ST_LAST_POLL:
- timeout = ata_pio_poll(qc);
+ ap->hsm_task_state = HSM_ST_IDLE;
+
+ /* complete taskfile transaction */
+ if (in_wq)
+ ata_poll_qc_complete(qc);
+ else
+ ata_qc_complete(qc);
+
+ poll_next = 0;
break;
- case HSM_ST_TMOUT:
case HSM_ST_ERR:
- ata_pio_error(qc);
- return;
+ if (qc->tf.command != ATA_CMD_PACKET)
+ printk(KERN_ERR "ata%u: dev %u command error, drv_stat 0x%x\n",
+ ap->id, qc->dev->devno, status);
+
+ /* make sure qc->err_mask is available to
+ * know what's wrong and recover
+ */
+ WARN_ON(qc->err_mask == 0);
+
+ ap->hsm_task_state = HSM_ST_IDLE;
+
+ /* complete taskfile transaction */
+ if (in_wq)
+ ata_poll_qc_complete(qc);
+ else
+ ata_qc_complete(qc);
+
+ poll_next = 0;
+ break;
+ default:
+ poll_next = 0;
+ BUG();
}
- if (timeout)
- ata_port_queue_task(ap, ata_pio_task, qc, timeout);
- else if (!qc_completed)
- goto fsm_start;
+ return poll_next;
}
-/**
- * atapi_packet_task - Write CDB bytes to hardware
- * @_data: qc in progress
- *
- * When device has indicated its readiness to accept
- * a CDB, this function is called. Send the CDB.
- * If DMA is to be performed, exit immediately.
- * Otherwise, we are in polling mode, so poll
- * status under operation succeeds or fails.
- *
- * LOCKING:
- * Kernel thread context (may sleep)
- */
-static void atapi_packet_task(void *_data)
+static void ata_pio_task(void *_data)
{
struct ata_queued_cmd *qc = _data;
struct ata_port *ap = qc->ap;
u8 status;
+ int poll_next;
- /* sleep-wait for BSY to clear */
- DPRINTK("busy wait\n");
- if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB)) {
- qc->err_mask |= AC_ERR_TIMEOUT;
- goto err_out;
- }
-
- /* make sure DRQ is set */
- status = ata_chk_status(ap);
- if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) {
- qc->err_mask |= AC_ERR_HSM;
- goto err_out;
- }
-
- /* send SCSI cdb */
- DPRINTK("send cdb\n");
- WARN_ON(qc->dev->cdb_len < 12);
-
- if (qc->tf.protocol == ATA_PROT_ATAPI_DMA ||
- qc->tf.protocol == ATA_PROT_ATAPI_NODATA) {
- unsigned long flags;
-
- /* Once we're done issuing command and kicking bmdma,
- * irq handler takes over. To not lose irq, we need
- * to clear NOINTR flag before sending cdb, but
- * interrupt handler shouldn't be invoked before we're
- * finished. Hence, the following locking.
- */
- spin_lock_irqsave(&ap->host_set->lock, flags);
- ap->flags &= ~ATA_FLAG_NOINTR;
- ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1);
- if (qc->tf.protocol == ATA_PROT_ATAPI_DMA)
- ap->ops->bmdma_start(qc); /* initiate bmdma */
- spin_unlock_irqrestore(&ap->host_set->lock, flags);
- } else {
- ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1);
+fsm_start:
+ WARN_ON(ap->hsm_task_state == HSM_ST_IDLE);
- /* PIO commands are handled by polling */
- ap->hsm_task_state = HSM_ST;
- ata_port_queue_task(ap, ata_pio_task, qc, 0);
+ /*
+ * This is purely heuristic. This is a fast path.
+ * Sometimes when we enter, BSY will be cleared in
+ * a chk-status or two. If not, the drive is probably seeking
+ * or something. Snooze for a couple msecs, then
+ * chk-status again. If still busy, queue delayed work.
+ */
+ status = ata_busy_wait(ap, ATA_BUSY, 5);
+ if (status & ATA_BUSY) {
+ msleep(2);
+ status = ata_busy_wait(ap, ATA_BUSY, 10);
+ if (status & ATA_BUSY) {
+ ata_port_queue_task(ap, ata_pio_task, qc, ATA_SHORT_PAUSE);
+ return;
+ }
}
- return;
+ /* move the HSM */
+ poll_next = ata_hsm_move(ap, qc, status, 1);
-err_out:
- ata_poll_qc_complete(qc);
+ /* another command or interrupt handler
+ * may be running at this point.
+ */
+ if (poll_next)
+ goto fsm_start;
}
/**
@@ -4322,43 +4433,105 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
+ /* Use polling pio if the LLD doesn't handle
+ * interrupt driven pio and atapi CDB interrupt.
+ */
+ if (ap->flags & ATA_FLAG_PIO_POLLING) {
+ switch (qc->tf.protocol) {
+ case ATA_PROT_PIO:
+ case ATA_PROT_ATAPI:
+ case ATA_PROT_ATAPI_NODATA:
+ qc->tf.flags |= ATA_TFLAG_POLLING;
+ break;
+ case ATA_PROT_ATAPI_DMA:
+ if (qc->dev->flags & ATA_DFLAG_CDB_INTR)
+ /* see ata_check_atapi_dma() */
+ BUG();
+ break;
+ default:
+ break;
+ }
+ }
+
+ /* select the device */
ata_dev_select(ap, qc->dev->devno, 1, 0);
+ /* start the command */
switch (qc->tf.protocol) {
case ATA_PROT_NODATA:
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ ata_qc_set_polling(qc);
+
ata_tf_to_host(ap, &qc->tf);
+ ap->hsm_task_state = HSM_ST_LAST;
+
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ ata_port_queue_task(ap, ata_pio_task, qc, 0);
+
break;
case ATA_PROT_DMA:
+ WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING);
+
ap->ops->tf_load(ap, &qc->tf); /* load tf registers */
ap->ops->bmdma_setup(qc); /* set up bmdma */
ap->ops->bmdma_start(qc); /* initiate bmdma */
+ ap->hsm_task_state = HSM_ST_LAST;
break;
- case ATA_PROT_PIO: /* load tf registers, initiate polling pio */
- ata_qc_set_polling(qc);
- ata_tf_to_host(ap, &qc->tf);
- ap->hsm_task_state = HSM_ST;
- ata_port_queue_task(ap, ata_pio_task, qc, 0);
- break;
+ case ATA_PROT_PIO:
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ ata_qc_set_polling(qc);
- case ATA_PROT_ATAPI:
- ata_qc_set_polling(qc);
ata_tf_to_host(ap, &qc->tf);
- ata_port_queue_task(ap, atapi_packet_task, qc, 0);
+
+ if (qc->tf.flags & ATA_TFLAG_WRITE) {
+ /* PIO data out protocol */
+ ap->hsm_task_state = HSM_ST_FIRST;
+ ata_port_queue_task(ap, ata_pio_task, qc, 0);
+
+ /* always send first data block using
+ * the ata_pio_task() codepath.
+ */
+ } else {
+ /* PIO data in protocol */
+ ap->hsm_task_state = HSM_ST;
+
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ ata_port_queue_task(ap, ata_pio_task, qc, 0);
+
+ /* if polling, ata_pio_task() handles the rest.
+ * otherwise, interrupt handler takes over from here.
+ */
+ }
+
break;
+ case ATA_PROT_ATAPI:
case ATA_PROT_ATAPI_NODATA:
- ap->flags |= ATA_FLAG_NOINTR;
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ ata_qc_set_polling(qc);
+
ata_tf_to_host(ap, &qc->tf);
- ata_port_queue_task(ap, atapi_packet_task, qc, 0);
+
+ ap->hsm_task_state = HSM_ST_FIRST;
+
+ /* send cdb by polling if no cdb interrupt */
+ if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) ||
+ (qc->tf.flags & ATA_TFLAG_POLLING))
+ ata_port_queue_task(ap, ata_pio_task, qc, 0);
break;
case ATA_PROT_ATAPI_DMA:
- ap->flags |= ATA_FLAG_NOINTR;
+ WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING);
+
ap->ops->tf_load(ap, &qc->tf); /* load tf registers */
ap->ops->bmdma_setup(qc); /* set up bmdma */
- ata_port_queue_task(ap, atapi_packet_task, qc, 0);
+ ap->hsm_task_state = HSM_ST_FIRST;
+
+ /* send cdb by polling if no cdb interrupt */
+ if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
+ ata_port_queue_task(ap, ata_pio_task, qc, 0);
break;
default:
@@ -4388,52 +4561,66 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
inline unsigned int ata_host_intr (struct ata_port *ap,
struct ata_queued_cmd *qc)
{
- u8 status, host_stat;
-
- switch (qc->tf.protocol) {
-
- case ATA_PROT_DMA:
- case ATA_PROT_ATAPI_DMA:
- case ATA_PROT_ATAPI:
- /* check status of DMA engine */
- host_stat = ap->ops->bmdma_status(ap);
- VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat);
+ u8 status, host_stat = 0;
- /* if it's not our irq... */
- if (!(host_stat & ATA_DMA_INTR))
- goto idle_irq;
-
- /* before we do anything else, clear DMA-Start bit */
- ap->ops->bmdma_stop(qc);
+ VPRINTK("ata%u: protocol %d task_state %d\n",
+ ap->id, qc->tf.protocol, ap->hsm_task_state);
- /* fall through */
-
- case ATA_PROT_ATAPI_NODATA:
- case ATA_PROT_NODATA:
- /* check altstatus */
- status = ata_altstatus(ap);
- if (status & ATA_BUSY)
- goto idle_irq;
+ /* Check whether we are expecting interrupt in this state */
+ switch (ap->hsm_task_state) {
+ case HSM_ST_FIRST:
+ /* Some pre-ATAPI-4 devices assert INTRQ
+ * at this state when ready to receive CDB.
+ */
- /* check main status, clearing INTRQ */
- status = ata_chk_status(ap);
- if (unlikely(status & ATA_BUSY))
+ /* Check the ATA_DFLAG_CDB_INTR flag is enough here.
+ * The flag was turned on only for atapi devices.
+ * No need to check is_atapi_taskfile(&qc->tf) again.
+ */
+ if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
goto idle_irq;
- DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
- ap->id, qc->tf.protocol, status);
-
- /* ack bmdma irq events */
- ap->ops->irq_clear(ap);
-
- /* complete taskfile transaction */
- qc->err_mask |= ac_err_mask(status);
- ata_qc_complete(qc);
break;
-
+ case HSM_ST_LAST:
+ if (qc->tf.protocol == ATA_PROT_DMA ||
+ qc->tf.protocol == ATA_PROT_ATAPI_DMA) {
+ /* check status of DMA engine */
+ host_stat = ap->ops->bmdma_status(ap);
+ VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat);
+
+ /* if it's not our irq... */
+ if (!(host_stat & ATA_DMA_INTR))
+ goto idle_irq;
+
+ /* before we do anything else, clear DMA-Start bit */
+ ap->ops->bmdma_stop(qc);
+
+ if (unlikely(host_stat & ATA_DMA_ERR)) {
+ /* error when transfering data to/from memory */
+ qc->err_mask |= AC_ERR_HOST_BUS;
+ ap->hsm_task_state = HSM_ST_ERR;
+ }
+ }
+ break;
+ case HSM_ST:
+ break;
default:
goto idle_irq;
}
+ /* check altstatus */
+ status = ata_altstatus(ap);
+ if (status & ATA_BUSY)
+ goto idle_irq;
+
+ /* check main status, clearing INTRQ */
+ status = ata_chk_status(ap);
+ if (unlikely(status & ATA_BUSY))
+ goto idle_irq;
+
+ /* ack bmdma irq events */
+ ap->ops->irq_clear(ap);
+
+ ata_hsm_move(ap, qc, status, 0);
return 1; /* irq handled */
idle_irq:
@@ -4480,11 +4667,11 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
ap = host_set->ports[i];
if (ap &&
- !(ap->flags & (ATA_FLAG_DISABLED | ATA_FLAG_NOINTR))) {
+ !(ap->flags & ATA_FLAG_DISABLED)) {
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
- if (qc && (!(qc->tf.ctl & ATA_NIEN)) &&
+ if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) &&
(qc->flags & ATA_QCFLAG_ACTIVE))
handled |= ata_host_intr(ap, qc);
}
diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c
index cd133f83e595..e401f353f848 100644
--- a/drivers/scsi/libata-eh.c
+++ b/drivers/scsi/libata-eh.c
@@ -350,7 +350,7 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc)
qc->tf.command, drv_stat, host_stat);
/* complete taskfile transaction */
- qc->err_mask |= ac_err_mask(drv_stat);
+ qc->err_mask |= AC_ERR_TIMEOUT;
break;
}
diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c
index b9a3c566f833..a341fa8d3291 100644
--- a/drivers/scsi/pdc_adma.c
+++ b/drivers/scsi/pdc_adma.c
@@ -455,13 +455,13 @@ static inline unsigned int adma_intr_pkt(struct ata_host_set *host_set)
continue;
handled = 1;
adma_enter_reg_mode(ap);
- if (ap->flags & (ATA_FLAG_DISABLED | ATA_FLAG_NOINTR))
+ if (ap->flags & ATA_FLAG_DISABLED)
continue;
pp = ap->private_data;
if (!pp || pp->state != adma_state_pkt)
continue;
qc = ata_qc_from_tag(ap, ap->active_tag);
- if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
+ if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) {
if ((status & (aPERR | aPSD | aUIRQ)))
qc->err_mask |= AC_ERR_OTHER;
else if (pp->pkt[0] != cDONE)
@@ -480,13 +480,13 @@ static inline unsigned int adma_intr_mmio(struct ata_host_set *host_set)
for (port_no = 0; port_no < host_set->n_ports; ++port_no) {
struct ata_port *ap;
ap = host_set->ports[port_no];
- if (ap && (!(ap->flags & (ATA_FLAG_DISABLED | ATA_FLAG_NOINTR)))) {
+ if (ap && (!(ap->flags & ATA_FLAG_DISABLED))) {
struct ata_queued_cmd *qc;
struct adma_port_priv *pp = ap->private_data;
if (!pp || pp->state != adma_state_mmio)
continue;
qc = ata_qc_from_tag(ap, ap->active_tag);
- if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
+ if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) {
/* check main status, clearing INTRQ */
u8 status = ata_check_status(ap);
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index e8d00f0efdf2..e6d141dd0385 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -87,7 +87,7 @@ enum {
MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */
MV_COMMON_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
- ATA_FLAG_NO_ATAPI),
+ ATA_FLAG_PIO_POLLING),
MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE,
CRQB_FLAG_READ = (1 << 0),
@@ -1396,7 +1396,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
}
}
- if (ap->flags & (ATA_FLAG_DISABLED | ATA_FLAG_NOINTR))
+ if (ap && (ap->flags & ATA_FLAG_DISABLED))
continue;
err_mask = ac_err_mask(ata_status);
@@ -1417,7 +1417,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
VPRINTK("port %u IRQ found for qc, "
"ata_status 0x%x\n", port,ata_status);
/* mark qc status appropriately */
- if (!(qc->tf.ctl & ATA_NIEN)) {
+ if (!(qc->tf.flags & ATA_TFLAG_POLLING)) {
qc->err_mask |= err_mask;
ata_qc_complete(qc);
}
diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
index 3a70875be8ba..70c51088d371 100644
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -279,11 +279,11 @@ static irqreturn_t nv_interrupt (int irq, void *dev_instance,
ap = host_set->ports[i];
if (ap &&
- !(ap->flags & (ATA_FLAG_DISABLED | ATA_FLAG_NOINTR))) {
+ !(ap->flags & ATA_FLAG_DISABLED)) {
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
- if (qc && (!(qc->tf.ctl & ATA_NIEN)))
+ if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
handled += ata_host_intr(ap, qc);
else
// No request pending? Clear interrupt status
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index e9d61bc2b247..bb000438cb6c 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -76,7 +76,8 @@ enum {
PDC_RESET = (1 << 11), /* HDMA reset */
PDC_COMMON_FLAGS = ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST |
- ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI,
+ ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI |
+ ATA_FLAG_PIO_POLLING,
};
@@ -534,11 +535,11 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *r
ap = host_set->ports[i];
tmp = mask & (1 << (i + 1));
if (tmp && ap &&
- !(ap->flags & (ATA_FLAG_DISABLED | ATA_FLAG_NOINTR))) {
+ !(ap->flags & ATA_FLAG_DISABLED)) {
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
- if (qc && (!(qc->tf.ctl & ATA_NIEN)))
+ if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
handled += pdc_host_intr(ap, qc);
}
}
diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c
index 259c2dec4e21..54283e06070e 100644
--- a/drivers/scsi/sata_qstor.c
+++ b/drivers/scsi/sata_qstor.c
@@ -175,7 +175,7 @@ static const struct ata_port_info qs_port_info[] = {
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_SATA_RESET |
//FIXME ATA_FLAG_SRST |
- ATA_FLAG_MMIO,
+ ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING,
.pio_mask = 0x10, /* pio4 */
.udma_mask = 0x7f, /* udma0-6 */
.port_ops = &qs_ata_ops,
@@ -394,14 +394,13 @@ static inline unsigned int qs_intr_pkt(struct ata_host_set *host_set)
DPRINTK("SFF=%08x%08x: sCHAN=%u sHST=%d sDST=%02x\n",
sff1, sff0, port_no, sHST, sDST);
handled = 1;
- if (ap && !(ap->flags &
- (ATA_FLAG_DISABLED|ATA_FLAG_NOINTR))) {
+ if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
struct ata_queued_cmd *qc;
struct qs_port_priv *pp = ap->private_data;
if (!pp || pp->state != qs_state_pkt)
continue;
qc = ata_qc_from_tag(ap, ap->active_tag);
- if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
+ if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) {
switch (sHST) {
case 0: /* successful CPB */
case 3: /* device error */
@@ -428,13 +427,13 @@ static inline unsigned int qs_intr_mmio(struct ata_host_set *host_set)
struct ata_port *ap;
ap = host_set->ports[port_no];
if (ap &&
- !(ap->flags & (ATA_FLAG_DISABLED | ATA_FLAG_NOINTR))) {
+ !(ap->flags & ATA_FLAG_DISABLED)) {
struct ata_queued_cmd *qc;
struct qs_port_priv *pp = ap->private_data;
if (!pp || pp->state != qs_state_mmio)
continue;
qc = ata_qc_from_tag(ap, ap->active_tag);
- if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
+ if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) {
/* check main status, clearing INTRQ */
u8 status = ata_check_status(ap);
diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c
index 96d7b73f5fdc..70a695488291 100644
--- a/drivers/scsi/sata_sx4.c
+++ b/drivers/scsi/sata_sx4.c
@@ -218,7 +218,7 @@ static const struct ata_port_info pdc_port_info[] = {
.sht = &pdc_sata_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_SRST | ATA_FLAG_MMIO |
- ATA_FLAG_NO_ATAPI,
+ ATA_FLAG_PIO_POLLING,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
@@ -833,11 +833,11 @@ static irqreturn_t pdc20621_interrupt (int irq, void *dev_instance, struct pt_re
tmp = mask & (1 << i);
VPRINTK("seq %u, port_no %u, ap %p, tmp %x\n", i, port_no, ap, tmp);
if (tmp && ap &&
- !(ap->flags & (ATA_FLAG_DISABLED | ATA_FLAG_NOINTR))) {
+ !(ap->flags & ATA_FLAG_DISABLED)) {
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
- if (qc && (!(qc->tf.ctl & ATA_NIEN)))
+ if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
handled += pdc20621_host_intr(ap, qc, (i > 4),
mmio_base);
}
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
index 9646c3932129..0372be7ff1c9 100644
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -221,14 +221,21 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance,
ap = host_set->ports[i];
- if (ap && !(ap->flags &
- (ATA_FLAG_DISABLED|ATA_FLAG_NOINTR))) {
+ if (is_vsc_sata_int_err(i, int_status)) {
+ u32 err_status;
+ printk(KERN_DEBUG "%s: ignoring interrupt(s)\n", __FUNCTION__);
+ err_status = ap ? vsc_sata_scr_read(ap, SCR_ERROR) : 0;
+ vsc_sata_scr_write(ap, SCR_ERROR, err_status);
+ handled++;
+ }
+
+ if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
- if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
+ if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
handled += ata_host_intr(ap, qc);
- } else if (is_vsc_sata_int_err(i, int_status)) {
+ else if (is_vsc_sata_int_err(i, int_status)) {
/*
* On some chips (i.e. Intel 31244), an error
* interrupt will sneak in at initialization
diff --git a/include/linux/ata.h b/include/linux/ata.h
index a7c41f3df8f4..1cbeb434af9a 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -212,6 +212,7 @@ enum {
ATA_TFLAG_WRITE = (1 << 3), /* data dir: host->dev==1 (write) */
ATA_TFLAG_LBA = (1 << 4), /* enable LBA */
ATA_TFLAG_FUA = (1 << 5), /* enable FUA */
+ ATA_TFLAG_POLLING = (1 << 6), /* set nIEN to 1 and use polling */
};
enum ata_tf_protocols {
@@ -285,6 +286,8 @@ struct ata_taskfile {
((u64) (id)[(n) + 1] << 16) | \
((u64) (id)[(n) + 0]) )
+#define ata_id_cdb_intr(id) (((id)[0] & 0x60) == 0x20)
+
static inline unsigned int ata_id_major_version(const u16 *id)
{
unsigned int mver;
@@ -324,6 +327,15 @@ static inline int is_atapi_taskfile(const struct ata_taskfile *tf)
(tf->protocol == ATA_PROT_ATAPI_DMA);
}
+static inline int is_multi_taskfile(struct ata_taskfile *tf)
+{
+ return (tf->command == ATA_CMD_READ_MULTI) ||
+ (tf->command == ATA_CMD_WRITE_MULTI) ||
+ (tf->command == ATA_CMD_READ_MULTI_EXT) ||
+ (tf->command == ATA_CMD_WRITE_MULTI_EXT) ||
+ (tf->command == ATA_CMD_WRITE_MULTI_FUA_EXT);
+}
+
static inline int ata_ok(u8 status)
{
return ((status & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ | ATA_ERR))
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 6ccacbf889e3..db17723e23fb 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -124,6 +124,7 @@ enum {
/* struct ata_device stuff */
ATA_DFLAG_LBA = (1 << 0), /* device supports LBA */
ATA_DFLAG_LBA48 = (1 << 1), /* device supports LBA48 */
+ ATA_DFLAG_CDB_INTR = (1 << 2), /* device asserts INTRQ when ready for CDB */
ATA_DFLAG_CFG_MASK = (1 << 8) - 1,
ATA_DFLAG_PIO = (1 << 8), /* device currently in PIO mode */
@@ -147,9 +148,9 @@ enum {
ATA_FLAG_PIO_DMA = (1 << 7), /* PIO cmds via DMA */
ATA_FLAG_PIO_LBA48 = (1 << 8), /* Host DMA engine is LBA28 only */
ATA_FLAG_IRQ_MASK = (1 << 9), /* Mask IRQ in PIO xfers */
+ ATA_FLAG_PIO_POLLING = (1 << 10), /* use polling PIO if LLD
+ * doesn't handle PIO interrupts */
- ATA_FLAG_NOINTR = (1 << 13), /* FIXME: Remove this once
- * proper HSM is in place. */
ATA_FLAG_DEBUGMSG = (1 << 14),
ATA_FLAG_FLUSH_PORT_TASK = (1 << 15), /* flush port task */
@@ -178,11 +179,8 @@ enum {
ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host_set only */
/* various lengths of time */
- ATA_TMOUT_PIO = 30 * HZ,
ATA_TMOUT_BOOT = 30 * HZ, /* heuristic */
ATA_TMOUT_BOOT_QUICK = 7 * HZ, /* heuristic */
- ATA_TMOUT_CDB = 30 * HZ,
- ATA_TMOUT_CDB_QUICK = 5 * HZ,
ATA_TMOUT_INTERNAL = 30 * HZ,
ATA_TMOUT_INTERNAL_QUICK = 5 * HZ,
@@ -252,14 +250,13 @@ enum {
};
enum hsm_task_states {
- HSM_ST_UNKNOWN,
- HSM_ST_IDLE,
- HSM_ST_POLL,
- HSM_ST_TMOUT,
- HSM_ST,
- HSM_ST_LAST,
- HSM_ST_LAST_POLL,
- HSM_ST_ERR,
+ HSM_ST_UNKNOWN, /* state unknown */
+ HSM_ST_IDLE, /* no command on going */
+ HSM_ST, /* (waiting the device to) transfer data */
+ HSM_ST_LAST, /* (waiting the device to) complete command */
+ HSM_ST_ERR, /* error */
+ HSM_ST_FIRST, /* (waiting the device to)
+ write CDB or first data block */
};
enum ata_completion_errors {
@@ -485,7 +482,6 @@ struct ata_port {
struct work_struct port_task;
unsigned int hsm_task_state;
- unsigned long pio_task_timeout;
u32 msg_enable;
struct list_head eh_done_q;
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-20 13:20:33 +0000