diff options
| -rw-r--r-- | MAINTAINERS | 12 | ||||
| -rw-r--r-- | drivers/uwb/Kconfig | 20 | ||||
| -rw-r--r-- | drivers/uwb/Makefile | 1 | ||||
| -rw-r--r-- | drivers/uwb/i1480/Makefile | 1 | ||||
| -rw-r--r-- | drivers/uwb/i1480/i1480-wlp.h | 200 | ||||
| -rw-r--r-- | drivers/uwb/i1480/i1480u-wlp/Makefile | 8 | ||||
| -rw-r--r-- | drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h | 283 | ||||
| -rw-r--r-- | drivers/uwb/i1480/i1480u-wlp/lc.c | 424 | ||||
| -rw-r--r-- | drivers/uwb/i1480/i1480u-wlp/netdev.c | 331 | ||||
| -rw-r--r-- | drivers/uwb/i1480/i1480u-wlp/rx.c | 474 | ||||
| -rw-r--r-- | drivers/uwb/i1480/i1480u-wlp/sysfs.c | 407 | ||||
| -rw-r--r-- | drivers/uwb/i1480/i1480u-wlp/tx.c | 584 | ||||
| -rw-r--r-- | drivers/uwb/wlp/Makefile | 10 | ||||
| -rw-r--r-- | drivers/uwb/wlp/driver.c | 43 | ||||
| -rw-r--r-- | drivers/uwb/wlp/eda.c | 415 | ||||
| -rw-r--r-- | drivers/uwb/wlp/messages.c | 1798 | ||||
| -rw-r--r-- | drivers/uwb/wlp/sysfs.c | 708 | ||||
| -rw-r--r-- | drivers/uwb/wlp/txrx.c | 354 | ||||
| -rw-r--r-- | drivers/uwb/wlp/wlp-internal.h | 224 | ||||
| -rw-r--r-- | drivers/uwb/wlp/wlp-lc.c | 560 | ||||
| -rw-r--r-- | drivers/uwb/wlp/wss-lc.c | 959 | ||||
| -rw-r--r-- | include/linux/wlp.h | 736 |
22 files changed, 1 insertions, 8551 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 69aa8fe060b3..3a3df3f28d37 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5995,9 +5995,6 @@ M: David Vrabel <david.vrabel@csr.com> L: linux-usb@vger.kernel.org S: Supported F: drivers/uwb/ -X: drivers/uwb/wlp/ -X: drivers/uwb/i1480/i1480u-wlp/ -X: drivers/uwb/i1480/i1480-wlp.h F: include/linux/uwb.h F: include/linux/uwb/ @@ -6533,15 +6530,6 @@ F: include/linux/wimax/debug.h F: include/net/wimax.h F: net/wimax/ -WIMEDIA LLC PROTOCOL (WLP) SUBSYSTEM -M: David Vrabel <david.vrabel@csr.com> -L: netdev@vger.kernel.org -S: Maintained -F: include/linux/wlp.h -F: drivers/uwb/wlp/ -F: drivers/uwb/i1480/i1480u-wlp/ -F: drivers/uwb/i1480/i1480-wlp.h - WISTRON LAPTOP BUTTON DRIVER M: Miloslav Trmac <mitr@volny.cz> S: Maintained diff --git a/drivers/uwb/Kconfig b/drivers/uwb/Kconfig index bac8e7a6f17b..d100f54ed650 100644 --- a/drivers/uwb/Kconfig +++ b/drivers/uwb/Kconfig @@ -12,8 +12,7 @@ menuconfig UWB technology using a wide spectrum (3.1-10.6GHz). It is optimized for in-room use (480Mbps at 2 meters, 110Mbps at 10m). It serves as the transport layer for other protocols, - such as Wireless USB (WUSB), IP (WLP) and upcoming - Bluetooth and 1394 + such as Wireless USB (WUSB). The topology is peer to peer; however, higher level protocols (such as WUSB) might impose a master/slave @@ -58,13 +57,6 @@ config UWB_WHCI To compile this driver select Y (built in) or M (module). It is safe to select any even if you do not have the hardware. -config UWB_WLP - tristate "Support WiMedia Link Protocol (Ethernet/IP over UWB)" - depends on UWB && NET - help - This is a common library for drivers that implement - networking over UWB. - config UWB_I1480U tristate "Support for Intel Wireless UWB Link 1480 HWA" depends on UWB_HWA @@ -77,14 +69,4 @@ config UWB_I1480U To compile this driver select Y (built in) or M (module). It is safe to select any even if you do not have the hardware. -config UWB_I1480U_WLP - tristate "Support for Intel Wireless UWB Link 1480 HWA's WLP interface" - depends on UWB_I1480U && UWB_WLP && NET - help - This driver enables WLP support for the i1480 when connected via - USB. WLP is the WiMedia Link Protocol, or IP over UWB. - - To compile this driver select Y (built in) or M (module). It - is safe to select any even if you don't have the hardware. - endif # UWB diff --git a/drivers/uwb/Makefile b/drivers/uwb/Makefile index 2f98d080fe78..d47dd6e2942c 100644 --- a/drivers/uwb/Makefile +++ b/drivers/uwb/Makefile @@ -1,5 +1,4 @@ obj-$(CONFIG_UWB) += uwb.o -obj-$(CONFIG_UWB_WLP) += wlp/ obj-$(CONFIG_UWB_WHCI) += umc.o whci.o whc-rc.o obj-$(CONFIG_UWB_HWA) += hwa-rc.o obj-$(CONFIG_UWB_I1480U) += i1480/ diff --git a/drivers/uwb/i1480/Makefile b/drivers/uwb/i1480/Makefile index 212bbc7d4c32..d69da1684cfb 100644 --- a/drivers/uwb/i1480/Makefile +++ b/drivers/uwb/i1480/Makefile @@ -1,2 +1 @@ obj-$(CONFIG_UWB_I1480U) += dfu/ i1480-est.o -obj-$(CONFIG_UWB_I1480U_WLP) += i1480u-wlp/ diff --git a/drivers/uwb/i1480/i1480-wlp.h b/drivers/uwb/i1480/i1480-wlp.h deleted file mode 100644 index 18a8b0e4567b..000000000000 --- a/drivers/uwb/i1480/i1480-wlp.h +++ /dev/null @@ -1,200 +0,0 @@ -/* - * Intel 1480 Wireless UWB Link - * WLP specific definitions - * - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - * - * FIXME: docs - */ - -#ifndef __i1480_wlp_h__ -#define __i1480_wlp_h__ - -#include <linux/spinlock.h> -#include <linux/list.h> -#include <linux/uwb.h> -#include <linux/if_ether.h> -#include <asm/byteorder.h> - -/* New simplified header format? */ -#undef WLP_HDR_FMT_2 /* FIXME: rename */ - -/** - * Values of the Delivery ID & Type field when PCA or DRP - * - * The Delivery ID & Type field in the WLP TX header indicates whether - * the frame is PCA or DRP. This is done based on the high level bit of - * this field. - * We use this constant to test if the traffic is PCA or DRP as follows: - * if (wlp_tx_hdr_delivery_id_type(wlp_tx_hdr) & WLP_DRP) - * this is DRP traffic - * else - * this is PCA traffic - */ -enum deliver_id_type_bit { - WLP_DRP = 8, -}; - -/** - * WLP TX header - * - * Indicates UWB/WLP-specific transmission parameters for a network - * packet. - */ -struct wlp_tx_hdr { - /* dword 0 */ - struct uwb_dev_addr dstaddr; - u8 key_index; - u8 mac_params; - /* dword 1 */ - u8 phy_params; -#ifndef WLP_HDR_FMT_2 - u8 reserved; - __le16 oui01; /* FIXME: not so sure if __le16 or u8[2] */ - /* dword 2 */ - u8 oui2; /* if all LE, it could be merged */ - __le16 prid; -#endif -} __attribute__((packed)); - -static inline int wlp_tx_hdr_delivery_id_type(const struct wlp_tx_hdr *hdr) -{ - return hdr->mac_params & 0x0f; -} - -static inline int wlp_tx_hdr_ack_policy(const struct wlp_tx_hdr *hdr) -{ - return (hdr->mac_params >> 4) & 0x07; -} - -static inline int wlp_tx_hdr_rts_cts(const struct wlp_tx_hdr *hdr) -{ - return (hdr->mac_params >> 7) & 0x01; -} - -static inline void wlp_tx_hdr_set_delivery_id_type(struct wlp_tx_hdr *hdr, int id) -{ - hdr->mac_params = (hdr->mac_params & ~0x0f) | id; -} - -static inline void wlp_tx_hdr_set_ack_policy(struct wlp_tx_hdr *hdr, - enum uwb_ack_pol policy) -{ - hdr->mac_params = (hdr->mac_params & ~0x70) | (policy << 4); -} - -static inline void wlp_tx_hdr_set_rts_cts(struct wlp_tx_hdr *hdr, int rts_cts) -{ - hdr->mac_params = (hdr->mac_params & ~0x80) | (rts_cts << 7); -} - -static inline enum uwb_phy_rate wlp_tx_hdr_phy_rate(const struct wlp_tx_hdr *hdr) -{ - return hdr->phy_params & 0x0f; -} - -static inline int wlp_tx_hdr_tx_power(const struct wlp_tx_hdr *hdr) -{ - return (hdr->phy_params >> 4) & 0x0f; -} - -static inline void wlp_tx_hdr_set_phy_rate(struct wlp_tx_hdr *hdr, enum uwb_phy_rate rate) -{ - hdr->phy_params = (hdr->phy_params & ~0x0f) | rate; -} - -static inline void wlp_tx_hdr_set_tx_power(struct wlp_tx_hdr *hdr, int pwr) -{ - hdr->phy_params = (hdr->phy_params & ~0xf0) | (pwr << 4); -} - - -/** - * WLP RX header - * - * Provides UWB/WLP-specific transmission data for a received - * network packet. - */ -struct wlp_rx_hdr { - /* dword 0 */ - struct uwb_dev_addr dstaddr; - struct uwb_dev_addr srcaddr; - /* dword 1 */ - u8 LQI; - s8 RSSI; - u8 reserved3; -#ifndef WLP_HDR_FMT_2 - u8 oui0; - /* dword 2 */ - __le16 oui12; - __le16 prid; -#endif -} __attribute__((packed)); - - -/** User configurable options for WLP */ -struct wlp_options { - struct mutex mutex; /* access to user configurable options*/ - struct wlp_tx_hdr def_tx_hdr; /* default tx hdr */ - u8 pca_base_priority; - u8 bw_alloc; /*index into bw_allocs[] for PCA/DRP reservations*/ -}; - - -static inline -void wlp_options_init(struct wlp_options *options) -{ - mutex_init(&options->mutex); - wlp_tx_hdr_set_ack_policy(&options->def_tx_hdr, UWB_ACK_INM); - wlp_tx_hdr_set_rts_cts(&options->def_tx_hdr, 1); - /* FIXME: default to phy caps */ - wlp_tx_hdr_set_phy_rate(&options->def_tx_hdr, UWB_PHY_RATE_480); -#ifndef WLP_HDR_FMT_2 - options->def_tx_hdr.prid = cpu_to_le16(0x0000); -#endif -} - - -/* sysfs helpers */ - -extern ssize_t uwb_pca_base_priority_store(struct wlp_options *, - const char *, size_t); -extern ssize_t uwb_pca_base_priority_show(const struct wlp_options *, char *); -extern ssize_t uwb_bw_alloc_store(struct wlp_options *, const char *, size_t); -extern ssize_t uwb_bw_alloc_show(const struct wlp_options *, char *); -extern ssize_t uwb_ack_policy_store(struct wlp_options *, - const char *, size_t); -extern ssize_t uwb_ack_policy_show(const struct wlp_options *, char *); -extern ssize_t uwb_rts_cts_store(struct wlp_options *, const char *, size_t); -extern ssize_t uwb_rts_cts_show(const struct wlp_options *, char *); -extern ssize_t uwb_phy_rate_store(struct wlp_options *, const char *, size_t); -extern ssize_t uwb_phy_rate_show(const struct wlp_options *, char *); - - -/** Simple bandwidth allocation (temporary and too simple) */ -struct wlp_bw_allocs { - const char *name; - struct { - u8 mask, stream; - } tx, rx; -}; - - -#endif /* #ifndef __i1480_wlp_h__ */ diff --git a/drivers/uwb/i1480/i1480u-wlp/Makefile b/drivers/uwb/i1480/i1480u-wlp/Makefile deleted file mode 100644 index fe6709b8e68b..000000000000 --- a/drivers/uwb/i1480/i1480u-wlp/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -obj-$(CONFIG_UWB_I1480U_WLP) += i1480u-wlp.o - -i1480u-wlp-objs := \ - lc.o \ - netdev.o \ - rx.o \ - sysfs.o \ - tx.o diff --git a/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h b/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h deleted file mode 100644 index 2e31f536a347..000000000000 --- a/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h +++ /dev/null @@ -1,283 +0,0 @@ -/* - * Intel 1480 Wireless UWB Link USB - * Header formats, constants, general internal interfaces - * - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - * - * This is not an standard interface. - * - * FIXME: docs - * - * i1480u-wlp is pretty simple: two endpoints, one for tx, one for - * rx. rx is polled. Network packets (ethernet, whatever) are wrapped - * in i1480 TX or RX headers (for sending over the air), and these - * packets are wrapped in UNTD headers (for sending to the WLP UWB - * controller). - * - * UNTD packets (UNTD hdr + i1480 hdr + network packet) packets - * cannot be bigger than i1480u_MAX_FRG_SIZE. When this happens, the - * i1480 packet is broken in chunks/packets: - * - * UNTD-1st.hdr + i1480.hdr + payload - * UNTD-next.hdr + payload - * ... - * UNTD-last.hdr + payload - * - * so that each packet is smaller or equal than i1480u_MAX_FRG_SIZE. - * - * All HW structures and bitmaps are little endian, so we need to play - * ugly tricks when defining bitfields. Hoping for the day GCC - * implements __attribute__((endian(1234))). - * - * FIXME: ROADMAP to the whole implementation - */ - -#ifndef __i1480u_wlp_h__ -#define __i1480u_wlp_h__ - -#include <linux/usb.h> -#include <linux/netdevice.h> -#include <linux/uwb.h> /* struct uwb_rc, struct uwb_notifs_handler */ -#include <linux/wlp.h> -#include "../i1480-wlp.h" - -#undef i1480u_FLOW_CONTROL /* Enable flow control code */ - -/** - * Basic flow control - */ -enum { - i1480u_TX_INFLIGHT_MAX = 1000, - i1480u_TX_INFLIGHT_THRESHOLD = 100, -}; - -/** Maximum size of a transaction that we can tx/rx */ -enum { - /* Maximum packet size computed as follows: max UNTD header (8) + - * i1480 RX header (8) + max Ethernet header and payload (4096) + - * Padding added by skb_reserve (2) to make post Ethernet payload - * start on 16 byte boundary*/ - i1480u_MAX_RX_PKT_SIZE = 4114, - i1480u_MAX_FRG_SIZE = 512, - i1480u_RX_BUFS = 9, -}; - - -/** - * UNTD packet type - * - * We need to fragment any payload whose UNTD packet is going to be - * bigger than i1480u_MAX_FRG_SIZE. - */ -enum i1480u_pkt_type { - i1480u_PKT_FRAG_1ST = 0x1, - i1480u_PKT_FRAG_NXT = 0x0, - i1480u_PKT_FRAG_LST = 0x2, - i1480u_PKT_FRAG_CMP = 0x3 -}; -enum { - i1480u_PKT_NONE = 0x4, -}; - -/** USB Network Transfer Descriptor - common */ -struct untd_hdr { - u8 type; - __le16 len; -} __attribute__((packed)); - -static inline enum i1480u_pkt_type untd_hdr_type(const struct untd_hdr *hdr) -{ - return hdr->type & 0x03; -} - -static inline int untd_hdr_rx_tx(const struct untd_hdr *hdr) -{ - return (hdr->type >> 2) & 0x01; -} - -static inline void untd_hdr_set_type(struct untd_hdr *hdr, enum i1480u_pkt_type type) -{ - hdr->type = (hdr->type & ~0x03) | type; -} - -static inline void untd_hdr_set_rx_tx(struct untd_hdr *hdr, int rx_tx) -{ - hdr->type = (hdr->type & ~0x04) | (rx_tx << 2); -} - - -/** - * USB Network Transfer Descriptor - Complete Packet - * - * This is for a packet that is smaller (header + payload) than - * i1480u_MAX_FRG_SIZE. - * - * @hdr.total_len is the size of the payload; the payload doesn't - * count this header nor the padding, but includes the size of i1480 - * header. - */ -struct untd_hdr_cmp { - struct untd_hdr hdr; - u8 padding; -} __attribute__((packed)); - - -/** - * USB Network Transfer Descriptor - First fragment - * - * @hdr.len is the size of the *whole packet* (excluding UNTD - * headers); @fragment_len is the size of the payload (excluding UNTD - * headers, but including i1480 headers). - */ -struct untd_hdr_1st { - struct untd_hdr hdr; - __le16 fragment_len; - u8 padding[3]; -} __attribute__((packed)); - - -/** - * USB Network Transfer Descriptor - Next / Last [Rest] - * - * @hdr.len is the size of the payload, not including headrs. - */ -struct untd_hdr_rst { - struct untd_hdr hdr; - u8 padding; -} __attribute__((packed)); - - -/** - * Transmission context - * - * Wraps all the stuff needed to track a pending/active tx - * operation. - */ -struct i1480u_tx { - struct list_head list_node; - struct i1480u *i1480u; - struct urb *urb; - - struct sk_buff *skb; - struct wlp_tx_hdr *wlp_tx_hdr; - - void *buf; /* if NULL, no new buf was used */ - size_t buf_size; -}; - -/** - * Basic flow control - * - * We maintain a basic flow control counter. "count" how many TX URBs are - * outstanding. Only allow "max" - * TX URBs to be outstanding. If this value is reached the queue will be - * stopped. The queue will be restarted when there are - * "threshold" URBs outstanding. - * Maintain a counter of how many time the TX queue needed to be restarted - * due to the "max" being exceeded and the "threshold" reached again. The - * timestamp "restart_ts" is to keep track from when the counter was last - * queried (see sysfs handling of file wlp_tx_inflight). - */ -struct i1480u_tx_inflight { - atomic_t count; - unsigned long max; - unsigned long threshold; - unsigned long restart_ts; - atomic_t restart_count; -}; - -/** - * Instance of a i1480u WLP interface - * - * Keeps references to the USB device that wraps it, as well as it's - * interface and associated UWB host controller. As well, it also - * keeps a link to the netdevice for integration into the networking - * stack. - * We maintian separate error history for the tx and rx endpoints because - * the implementation does not rely on locking - having one shared - * structure between endpoints may cause problems. Adding locking to the - * implementation will have higher cost than adding a separate structure. - */ -struct i1480u { - struct usb_device *usb_dev; - struct usb_interface *usb_iface; - struct net_device *net_dev; - - spinlock_t lock; - - /* RX context handling */ - struct sk_buff *rx_skb; - struct uwb_dev_addr rx_srcaddr; - size_t rx_untd_pkt_size; - struct i1480u_rx_buf { - struct i1480u *i1480u; /* back pointer */ - struct urb *urb; - struct sk_buff *data; /* i1480u_MAX_RX_PKT_SIZE each */ - } rx_buf[i1480u_RX_BUFS]; /* N bufs */ - - spinlock_t tx_list_lock; /* TX context */ - struct list_head tx_list; - u8 tx_stream; - - struct stats lqe_stats, rssi_stats; /* radio statistics */ - - /* Options we can set from sysfs */ - struct wlp_options options; - struct uwb_notifs_handler uwb_notifs_handler; - struct edc tx_errors; - struct edc rx_errors; - struct wlp wlp; -#ifdef i1480u_FLOW_CONTROL - struct urb *notif_urb; - struct edc notif_edc; /* error density counter */ - u8 notif_buffer[1]; -#endif - struct i1480u_tx_inflight tx_inflight; -}; - -/* Internal interfaces */ -extern void i1480u_rx_cb(struct urb *urb); -extern int i1480u_rx_setup(struct i1480u *); -extern void i1480u_rx_release(struct i1480u *); -extern void i1480u_tx_release(struct i1480u *); -extern int i1480u_xmit_frame(struct wlp *, struct sk_buff *, - struct uwb_dev_addr *); -extern void i1480u_stop_queue(struct wlp *); -extern void i1480u_start_queue(struct wlp *); -extern int i1480u_sysfs_setup(struct i1480u *); -extern void i1480u_sysfs_release(struct i1480u *); - -/* netdev interface */ -extern int i1480u_open(struct net_device *); -extern int i1480u_stop(struct net_device *); -extern netdev_tx_t i1480u_hard_start_xmit(struct sk_buff *, - struct net_device *); -extern void i1480u_tx_timeout(struct net_device *); -extern int i1480u_set_config(struct net_device *, struct ifmap *); -extern int i1480u_change_mtu(struct net_device *, int); -extern void i1480u_uwb_notifs_cb(void *, struct uwb_dev *, enum uwb_notifs); - -/* bandwidth allocation callback */ -extern void i1480u_bw_alloc_cb(struct uwb_rsv *); - -/* Sys FS */ -extern struct attribute_group i1480u_wlp_attr_group; - -#endif /* #ifndef __i1480u_wlp_h__ */ diff --git a/drivers/uwb/i1480/i1480u-wlp/lc.c b/drivers/uwb/i1480/i1480u-wlp/lc.c deleted file mode 100644 index def778cf2216..000000000000 --- a/drivers/uwb/i1480/i1480u-wlp/lc.c +++ /dev/null @@ -1,424 +0,0 @@ -/* - * WUSB Wire Adapter: WLP interface - * Driver for the Linux Network stack. - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - * - * FIXME: docs - * - * This implements a very simple network driver for the WLP USB - * device that is associated to a UWB (Ultra Wide Band) host. - * - * This is seen as an interface of a composite device. Once the UWB - * host has an association to another WLP capable device, the - * networking interface (aka WLP) can start to send packets back and - * forth. - * - * Limitations: - * - * - Hand cranked; can't ifup the interface until there is an association - * - * - BW allocation very simplistic [see i1480u_mas_set() and callees]. - * - * - * ROADMAP: - * - * ENTRY POINTS (driver model): - * - * i1480u_driver_{exit,init}(): initialization of the driver. - * - * i1480u_probe(): called by the driver code when a device - * matching 'i1480u_id_table' is connected. - * - * This allocs a netdev instance, inits with - * i1480u_add(), then registers_netdev(). - * i1480u_init() - * i1480u_add() - * - * i1480u_disconnect(): device has been disconnected/module - * is being removed. - * i1480u_rm() - */ -#include <linux/gfp.h> -#include <linux/if_arp.h> -#include <linux/etherdevice.h> - -#include "i1480u-wlp.h" - - - -static inline -void i1480u_init(struct i1480u *i1480u) -{ - /* nothing so far... doesn't it suck? */ - spin_lock_init(&i1480u->lock); - INIT_LIST_HEAD(&i1480u->tx_list); - spin_lock_init(&i1480u->tx_list_lock); - wlp_options_init(&i1480u->options); - edc_init(&i1480u->tx_errors); - edc_init(&i1480u->rx_errors); -#ifdef i1480u_FLOW_CONTROL - edc_init(&i1480u->notif_edc); -#endif - stats_init(&i1480u->lqe_stats); - stats_init(&i1480u->rssi_stats); - wlp_init(&i1480u->wlp); -} - -/** - * Fill WLP device information structure - * - * The structure will contain a few character arrays, each ending with a - * null terminated string. Each string has to fit (excluding terminating - * character) into a specified range obtained from the WLP substack. - * - * It is still not clear exactly how this device information should be - * obtained. Until we find out we use the USB device descriptor as backup, some - * information elements have intuitive mappings, other not. - */ -static -void i1480u_fill_device_info(struct wlp *wlp, struct wlp_device_info *dev_info) -{ - struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp); - struct usb_device *usb_dev = i1480u->usb_dev; - /* Treat device name and model name the same */ - if (usb_dev->descriptor.iProduct) { - usb_string(usb_dev, usb_dev->descriptor.iProduct, - dev_info->name, sizeof(dev_info->name)); - usb_string(usb_dev, usb_dev->descriptor.iProduct, - dev_info->model_name, sizeof(dev_info->model_name)); - } - if (usb_dev->descriptor.iManufacturer) - usb_string(usb_dev, usb_dev->descriptor.iManufacturer, - dev_info->manufacturer, - sizeof(dev_info->manufacturer)); - scnprintf(dev_info->model_nr, sizeof(dev_info->model_nr), "%04x", - __le16_to_cpu(usb_dev->descriptor.bcdDevice)); - if (usb_dev->descriptor.iSerialNumber) - usb_string(usb_dev, usb_dev->descriptor.iSerialNumber, - dev_info->serial, sizeof(dev_info->serial)); - /* FIXME: where should we obtain category? */ - dev_info->prim_dev_type.category = cpu_to_le16(WLP_DEV_CAT_OTHER); - /* FIXME: Complete OUI and OUIsubdiv attributes */ -} - -#ifdef i1480u_FLOW_CONTROL -/** - * Callback for the notification endpoint - * - * This mostly controls the xon/xoff protocol. In case of hard error, - * we stop the queue. If not, we always retry. - */ -static -void i1480u_notif_cb(struct urb *urb, struct pt_regs *regs) -{ - struct i1480u *i1480u = urb->context; - struct usb_interface *usb_iface = i1480u->usb_iface; - struct device *dev = &usb_iface->dev; - int result; - - switch (urb->status) { - case 0: /* Got valid data, do xon/xoff */ - switch (i1480u->notif_buffer[0]) { - case 'N': - dev_err(dev, "XOFF STOPPING queue at %lu\n", jiffies); - netif_stop_queue(i1480u->net_dev); - break; - case 'A': - dev_err(dev, "XON STARTING queue at %lu\n", jiffies); - netif_start_queue(i1480u->net_dev); - break; - default: - dev_err(dev, "NEP: unknown data 0x%02hhx\n", - i1480u->notif_buffer[0]); - } - break; - case -ECONNRESET: /* Controlled situation ... */ - case -ENOENT: /* we killed the URB... */ - dev_err(dev, "NEP: URB reset/noent %d\n", urb->status); - goto error; - case -ESHUTDOWN: /* going away! */ - dev_err(dev, "NEP: URB down %d\n", urb->status); - goto error; - default: /* Retry unless it gets ugly */ - if (edc_inc(&i1480u->notif_edc, EDC_MAX_ERRORS, - EDC_ERROR_TIMEFRAME)) { - dev_err(dev, "NEP: URB max acceptable errors " - "exceeded; resetting device\n"); - goto error_reset; - } - dev_err(dev, "NEP: URB error %d\n", urb->status); - break; - } - result = usb_submit_urb(urb, GFP_ATOMIC); - if (result < 0) { - dev_err(dev, "NEP: Can't resubmit URB: %d; resetting device\n", - result); - goto error_reset; - } - return; - -error_reset: - wlp_reset_all(&i1480-wlp); -error: - netif_stop_queue(i1480u->net_dev); - return; -} -#endif - -static const struct net_device_ops i1480u_netdev_ops = { - .ndo_open = i1480u_open, - .ndo_stop = i1480u_stop, - .ndo_start_xmit = i1480u_hard_start_xmit, - .ndo_tx_timeout = i1480u_tx_timeout, - .ndo_set_config = i1480u_set_config, - .ndo_change_mtu = i1480u_change_mtu, -}; - -static -int i1480u_add(struct i1480u *i1480u, struct usb_interface *iface) -{ - int result = -ENODEV; - struct wlp *wlp = &i1480u->wlp; - struct usb_device *usb_dev = interface_to_usbdev(iface); - struct net_device *net_dev = i1480u->net_dev; - struct uwb_rc *rc; - struct uwb_dev *uwb_dev; -#ifdef i1480u_FLOW_CONTROL - struct usb_endpoint_descriptor *epd; -#endif - - i1480u->usb_dev = usb_get_dev(usb_dev); - i1480u->usb_iface = iface; - rc = uwb_rc_get_by_grandpa(&i1480u->usb_dev->dev); - if (rc == NULL) { - dev_err(&iface->dev, "Cannot get associated UWB Radio " - "Controller\n"); - goto out; - } - wlp->xmit_frame = i1480u_xmit_frame; - wlp->fill_device_info = i1480u_fill_device_info; - wlp->stop_queue = i1480u_stop_queue; - wlp->start_queue = i1480u_start_queue; - result = wlp_setup(wlp, rc, net_dev); - if (result < 0) { - dev_err(&iface->dev, "Cannot setup WLP\n"); - goto error_wlp_setup; - } - result = 0; - ether_setup(net_dev); /* make it an etherdevice */ - uwb_dev = &rc->uwb_dev; - /* FIXME: hookup address change notifications? */ - - memcpy(net_dev->dev_addr, uwb_dev->mac_addr.data, - sizeof(net_dev->dev_addr)); - - net_dev->hard_header_len = sizeof(struct untd_hdr_cmp) - + sizeof(struct wlp_tx_hdr) - + WLP_DATA_HLEN - + ETH_HLEN; - net_dev->mtu = 3500; - net_dev->tx_queue_len = 20; /* FIXME: maybe use 1000? */ - -/* net_dev->flags &= ~IFF_BROADCAST; FIXME: BUG in firmware */ - /* FIXME: multicast disabled */ - net_dev->flags &= ~IFF_MULTICAST; - net_dev->features &= ~NETIF_F_SG; - net_dev->features &= ~NETIF_F_FRAGLIST; - /* All NETIF_F_*_CSUM disabled */ - net_dev->features |= NETIF_F_HIGHDMA; - net_dev->watchdog_timeo = 5*HZ; /* FIXME: a better default? */ - - net_dev->netdev_ops = &i1480u_netdev_ops; - -#ifdef i1480u_FLOW_CONTROL - /* Notification endpoint setup (submitted when we open the device) */ - i1480u->notif_urb = usb_alloc_urb(0, GFP_KERNEL); - if (i1480u->notif_urb == NULL) { - dev_err(&iface->dev, "Unable to allocate notification URB\n"); - result = -ENOMEM; - goto error_urb_alloc; - } - epd = &iface->cur_altsetting->endpoint[0].desc; - usb_fill_int_urb(i1480u->notif_urb, usb_dev, - usb_rcvintpipe(usb_dev, epd->bEndpointAddress), - i1480u->notif_buffer, sizeof(i1480u->notif_buffer), - i1480u_notif_cb, i1480u, epd->bInterval); - -#endif - - i1480u->tx_inflight.max = i1480u_TX_INFLIGHT_MAX; - i1480u->tx_inflight.threshold = i1480u_TX_INFLIGHT_THRESHOLD; - i1480u->tx_inflight.restart_ts = jiffies; - usb_set_intfdata(iface, i1480u); - return result; - -#ifdef i1480u_FLOW_CONTROL -error_urb_alloc: -#endif - wlp_remove(wlp); -error_wlp_setup: - uwb_rc_put(rc); -out: - usb_put_dev(i1480u->usb_dev); - return result; -} - -static void i1480u_rm(struct i1480u *i1480u) -{ - struct uwb_rc *rc = i1480u->wlp.rc; - usb_set_intfdata(i1480u->usb_iface, NULL); -#ifdef i1480u_FLOW_CONTROL - usb_kill_urb(i1480u->notif_urb); - usb_free_urb(i1480u->notif_urb); -#endif - wlp_remove(&i1480u->wlp); - uwb_rc_put(rc); - usb_put_dev(i1480u->usb_dev); -} - -/** Just setup @net_dev's i1480u private data */ -static void i1480u_netdev_setup(struct net_device *net_dev) -{ - struct i1480u *i1480u = netdev_priv(net_dev); - /* Initialize @i1480u */ - memset(i1480u, 0, sizeof(*i1480u)); - i1480u_init(i1480u); -} - -/** - * Probe a i1480u interface and register it - * - * @iface: USB interface to link to - * @id: USB class/subclass/protocol id - * @returns: 0 if ok, < 0 errno code on error. - * - * Does basic housekeeping stuff and then allocs a netdev with space - * for the i1480u data. Initializes, registers in i1480u, registers in - * netdev, ready to go. - */ -static int i1480u_probe(struct usb_interface *iface, - const struct usb_device_id *id) -{ - int result; - struct net_device *net_dev; - struct device *dev = &iface->dev; - struct i1480u *i1480u; - - /* Allocate instance [calls i1480u_netdev_setup() on it] */ - result = -ENOMEM; - net_dev = alloc_netdev(sizeof(*i1480u), "wlp%d", i1480u_netdev_setup); - if (net_dev == NULL) { - dev_err(dev, "no memory for network device instance\n"); - goto error_alloc_netdev; - } - SET_NETDEV_DEV(net_dev, dev); - i1480u = netdev_priv(net_dev); - i1480u->net_dev = net_dev; - result = i1480u_add(i1480u, iface); /* Now setup all the wlp stuff */ - if (result < 0) { - dev_err(dev, "cannot add i1480u device: %d\n", result); - goto error_i1480u_add; - } - result = register_netdev(net_dev); /* Okey dokey, bring it up */ - if (result < 0) { - dev_err(dev, "cannot register network device: %d\n", result); - goto error_register_netdev; - } - i1480u_sysfs_setup(i1480u); - if (result < 0) - goto error_sysfs_init; - return 0; - -error_sysfs_init: - unregister_netdev(net_dev); -error_register_netdev: - i1480u_rm(i1480u); -error_i1480u_add: - free_netdev(net_dev); -error_alloc_netdev: - return result; -} - - -/** - * Disconect a i1480u from the system. - * - * i1480u_stop() has been called before, so al the rx and tx contexts - * have been taken down already. Make sure the queue is stopped, - * unregister netdev and i1480u, free and kill. - */ -static void i1480u_disconnect(struct usb_interface *iface) -{ - struct i1480u *i1480u; - struct net_device *net_dev; - - i1480u = usb_get_intfdata(iface); - net_dev = i1480u->net_dev; - netif_stop_queue(net_dev); -#ifdef i1480u_FLOW_CONTROL - usb_kill_urb(i1480u->notif_urb); -#endif - i1480u_sysfs_release(i1480u); - unregister_netdev(net_dev); - i1480u_rm(i1480u); - free_netdev(net_dev); -} - -static struct usb_device_id i1480u_id_table[] = { - { - .match_flags = USB_DEVICE_ID_MATCH_DEVICE \ - | USB_DEVICE_ID_MATCH_DEV_INFO \ - | USB_DEVICE_ID_MATCH_INT_INFO, - .idVendor = 0x8086, - .idProduct = 0x0c3b, - .bDeviceClass = 0xef, - .bDeviceSubClass = 0x02, - .bDeviceProtocol = 0x02, - .bInterfaceClass = 0xff, - .bInterfaceSubClass = 0xff, - .bInterfaceProtocol = 0xff, - }, - {}, -}; -MODULE_DEVICE_TABLE(usb, i1480u_id_table); - -static struct usb_driver i1480u_driver = { - .name = KBUILD_MODNAME, - .probe = i1480u_probe, - .disconnect = i1480u_disconnect, - .id_table = i1480u_id_table, -}; - -static int __init i1480u_driver_init(void) -{ - return usb_register(&i1480u_driver); -} -module_init(i1480u_driver_init); - - -static void __exit i1480u_driver_exit(void) -{ - usb_deregister(&i1480u_driver); -} -module_exit(i1480u_driver_exit); - -MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); -MODULE_DESCRIPTION("i1480 Wireless UWB Link WLP networking for USB"); -MODULE_LICENSE("GPL"); diff --git a/drivers/uwb/i1480/i1480u-wlp/netdev.c b/drivers/uwb/i1480/i1480u-wlp/netdev.c deleted file mode 100644 index f98f6ce8b9e7..000000000000 --- a/drivers/uwb/i1480/i1480u-wlp/netdev.c +++ /dev/null @@ -1,331 +0,0 @@ -/* - * WUSB Wire Adapter: WLP interface - * Driver for the Linux Network stack. - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - * - * FIXME: docs - * - * Implementation of the netdevice linkage (except tx and rx related stuff). - * - * ROADMAP: - * - * ENTRY POINTS (Net device): - * - * i1480u_open(): Called when we ifconfig up the interface; - * associates to a UWB host controller, reserves - * bandwidth (MAS), sets up RX USB URB and starts - * the queue. - * - * i1480u_stop(): Called when we ifconfig down a interface; - * reverses _open(). - * - * i1480u_set_config(): - */ - -#include <linux/slab.h> -#include <linux/if_arp.h> -#include <linux/etherdevice.h> - -#include "i1480u-wlp.h" - -struct i1480u_cmd_set_ip_mas { - struct uwb_rccb rccb; - struct uwb_dev_addr addr; - u8 stream; - u8 owner; - u8 type; /* enum uwb_drp_type */ - u8 baMAS[32]; -} __attribute__((packed)); - - -static -int i1480u_set_ip_mas( - struct uwb_rc *rc, - const struct uwb_dev_addr *dstaddr, - u8 stream, u8 owner, u8 type, unsigned long *mas) -{ - - int result; - struct i1480u_cmd_set_ip_mas *cmd; - struct uwb_rc_evt_confirm reply; - - result = -ENOMEM; - cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); - if (cmd == NULL) - goto error_kzalloc; - cmd->rccb.bCommandType = 0xfd; - cmd->rccb.wCommand = cpu_to_le16(0x000e); - cmd->addr = *dstaddr; - cmd->stream = stream; - cmd->owner = owner; - cmd->type = type; - if (mas == NULL) - memset(cmd->baMAS, 0x00, sizeof(cmd->baMAS)); - else - memcpy(cmd->baMAS, mas, sizeof(cmd->baMAS)); - reply.rceb.bEventType = 0xfd; - reply.rceb.wEvent = cpu_to_le16(0x000e); - result = uwb_rc_cmd(rc, "SET-IP-MAS", &cmd->rccb, sizeof(*cmd), - &reply.rceb, sizeof(reply)); - if (result < 0) - goto error_cmd; - if (reply.bResultCode != UWB_RC_RES_FAIL) { - dev_err(&rc->uwb_dev.dev, - "SET-IP-MAS: command execution failed: %d\n", - reply.bResultCode); - result = -EIO; - } -error_cmd: - kfree(cmd); -error_kzalloc: - return result; -} - -/* - * Inform a WLP interface of a MAS reservation - * - * @rc is assumed refcnted. - */ -/* FIXME: detect if remote device is WLP capable? */ -static int i1480u_mas_set_dev(struct uwb_dev *uwb_dev, struct uwb_rc *rc, - u8 stream, u8 owner, u8 type, unsigned long *mas) -{ - int result = 0; - struct device *dev = &rc->uwb_dev.dev; - - result = i1480u_set_ip_mas(rc, &uwb_dev->dev_addr, stream, owner, - type, mas); - if (result < 0) { - char rcaddrbuf[UWB_ADDR_STRSIZE], devaddrbuf[UWB_ADDR_STRSIZE]; - uwb_dev_addr_print(rcaddrbuf, sizeof(rcaddrbuf), - &rc->uwb_dev.dev_addr); - uwb_dev_addr_print(devaddrbuf, sizeof(devaddrbuf), - &uwb_dev->dev_addr); - dev_err(dev, "Set IP MAS (%s to %s) failed: %d\n", - rcaddrbuf, devaddrbuf, result); - } - return result; -} - -/** - * Called by bandwidth allocator when change occurs in reservation. - * - * @rsv: The reservation that is being established, modified, or - * terminated. - * - * When a reservation is established, modified, or terminated the upper layer - * (WLP here) needs set/update the currently available Media Access Slots - * that can be use for IP traffic. - * - * Our action taken during failure depends on how the reservation is being - * changed: - * - if reservation is being established we do nothing if we cannot set the - * new MAS to be used - * - if reservation is being terminated we revert back to PCA whether the - * SET IP MAS command succeeds or not. - */ -void i1480u_bw_alloc_cb(struct uwb_rsv *rsv) -{ - int result = 0; - struct i1480u *i1480u = rsv->pal_priv; - struct device *dev = &i1480u->usb_iface->dev; - struct uwb_dev *target_dev = rsv->target.dev; - struct uwb_rc *rc = i1480u->wlp.rc; - u8 stream = rsv->stream; - int type = rsv->type; - int is_owner = rsv->owner == &rc->uwb_dev; - unsigned long *bmp = rsv->mas.bm; - - dev_err(dev, "WLP callback called - sending set ip mas\n"); - /*user cannot change options while setting configuration*/ - mutex_lock(&i1480u->options.mutex); - switch (rsv->state) { - case UWB_RSV_STATE_T_ACCEPTED: - case UWB_RSV_STATE_O_ESTABLISHED: - result = i1480u_mas_set_dev(target_dev, rc, stream, is_owner, - type, bmp); - if (result < 0) { - dev_err(dev, "MAS reservation failed: %d\n", result); - goto out; - } - if (is_owner) { - wlp_tx_hdr_set_delivery_id_type(&i1480u->options.def_tx_hdr, - WLP_DRP | stream); - wlp_tx_hdr_set_rts_cts(&i1480u->options.def_tx_hdr, 0); - } - break; - case UWB_RSV_STATE_NONE: - /* revert back to PCA */ - result = i1480u_mas_set_dev(target_dev, rc, stream, is_owner, - type, bmp); - if (result < 0) - dev_err(dev, "MAS reservation failed: %d\n", result); - /* Revert to PCA even though SET IP MAS failed. */ - wlp_tx_hdr_set_delivery_id_type(&i1480u->options.def_tx_hdr, - i1480u->options.pca_base_priority); - wlp_tx_hdr_set_rts_cts(&i1480u->options.def_tx_hdr, 1); - break; - default: - dev_err(dev, "unexpected WLP reservation state: %s (%d).\n", - uwb_rsv_state_str(rsv->state), rsv->state); - break; - } -out: - mutex_unlock(&i1480u->options.mutex); - return; -} - -/** - * - * Called on 'ifconfig up' - */ -int i1480u_open(struct net_device *net_dev) -{ - int result; - struct i1480u *i1480u = netdev_priv(net_dev); - struct wlp *wlp = &i1480u->wlp; - struct uwb_rc *rc; - struct device *dev = &i1480u->usb_iface->dev; - - rc = wlp->rc; - result = i1480u_rx_setup(i1480u); /* Alloc RX stuff */ - if (result < 0) - goto error_rx_setup; - - result = uwb_radio_start(&wlp->pal); - if (result < 0) - goto error_radio_start; - - netif_wake_queue(net_dev); -#ifdef i1480u_FLOW_CONTROL - result = usb_submit_urb(i1480u->notif_urb, GFP_KERNEL); - if (result < 0) { - dev_err(dev, "Can't submit notification URB: %d\n", result); - goto error_notif_urb_submit; - } -#endif - /* Interface is up with an address, now we can create WSS */ - result = wlp_wss_setup(net_dev, &wlp->wss); - if (result < 0) { - dev_err(dev, "Can't create WSS: %d. \n", result); - goto error_wss_setup; - } - return 0; -error_wss_setup: -#ifdef i1480u_FLOW_CONTROL - usb_kill_urb(i1480u->notif_urb); -error_notif_urb_submit: -#endif - uwb_radio_stop(&wlp->pal); -error_radio_start: - netif_stop_queue(net_dev); - i1480u_rx_release(i1480u); -error_rx_setup: - return result; -} - - -/** - * Called on 'ifconfig down' - */ -int i1480u_stop(struct net_device *net_dev) -{ - struct i1480u *i1480u = netdev_priv(net_dev); - struct wlp *wlp = &i1480u->wlp; - - BUG_ON(wlp->rc == NULL); - wlp_wss_remove(&wlp->wss); - netif_carrier_off(net_dev); -#ifdef i1480u_FLOW_CONTROL - usb_kill_urb(i1480u->notif_urb); -#endif - netif_stop_queue(net_dev); - uwb_radio_stop(&wlp->pal); - i1480u_rx_release(i1480u); - i1480u_tx_release(i1480u); - return 0; -} - -/** - * - * Change the interface config--we probably don't have to do anything. - */ -int i1480u_set_config(struct net_device *net_dev, struct ifmap *map) -{ - int result; - struct i1480u *i1480u = netdev_priv(net_dev); - BUG_ON(i1480u->wlp.rc == NULL); - result = 0; - return result; -} - -/** - * Change the MTU of the interface - */ -int i1480u_change_mtu(struct net_device *net_dev, int mtu) -{ - static union { - struct wlp_tx_hdr tx; - struct wlp_rx_hdr rx; - } i1480u_all_hdrs; - - if (mtu < ETH_HLEN) /* We encap eth frames */ - return -ERANGE; - if (mtu > 4000 - sizeof(i1480u_all_hdrs)) - return -ERANGE; - net_dev->mtu = mtu; - return 0; -} - -/** - * Stop the network queue - * - * Enable WLP substack to stop network queue. We also set the flow control - * threshold at this time to prevent the flow control from restarting the - * queue. - * - * we are loosing the current threshold value here ... FIXME? - */ -void i1480u_stop_queue(struct wlp *wlp) -{ - struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp); - struct net_device *net_dev = i1480u->net_dev; - i1480u->tx_inflight.threshold = 0; - netif_stop_queue(net_dev); -} - -/** - * Start the network queue - * - * Enable WLP substack to start network queue. Also re-enable the flow - * control to manage the queue again. - * - * We re-enable the flow control by storing the default threshold in the - * flow control threshold. This means that if the user modified the - * threshold before the queue was stopped and restarted that information - * will be lost. FIXME? - */ -void i1480u_start_queue(struct wlp *wlp) -{ - struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp); - struct net_device *net_dev = i1480u->net_dev; - i1480u->tx_inflight.threshold = i1480u_TX_INFLIGHT_THRESHOLD; - netif_start_queue(net_dev); -} diff --git a/drivers/uwb/i1480/i1480u-wlp/rx.c b/drivers/uwb/i1480/i1480u-wlp/rx.c deleted file mode 100644 index d4e51e108aa4..000000000000 --- a/drivers/uwb/i1480/i1480u-wlp/rx.c +++ /dev/null @@ -1,474 +0,0 @@ -/* - * WUSB Wire Adapter: WLP interface - * Driver for the Linux Network stack. - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - * - * i1480u's RX handling is simple. i1480u will send the received - * network packets broken up in fragments; 1 to N fragments make a - * packet, we assemble them together and deliver the packet with netif_rx(). - * - * Beacuse each USB transfer is a *single* fragment (except when the - * transfer contains a first fragment), each URB called thus - * back contains one or two fragments. So we queue N URBs, each with its own - * fragment buffer. When a URB is done, we process it (adding to the - * current skb from the fragment buffer until complete). Once - * processed, we requeue the URB. There is always a bunch of URBs - * ready to take data, so the intergap should be minimal. - * - * An URB's transfer buffer is the data field of a socket buffer. This - * reduces copying as data can be passed directly to network layer. If a - * complete packet or 1st fragment is received the URB's transfer buffer is - * taken away from it and used to send data to the network layer. In this - * case a new transfer buffer is allocated to the URB before being requeued. - * If a "NEXT" or "LAST" fragment is received, the fragment contents is - * appended to the RX packet under construction and the transfer buffer - * is reused. To be able to use this buffer to assemble complete packets - * we set each buffer's size to that of the MAX ethernet packet that can - * be received. There is thus room for improvement in memory usage. - * - * When the max tx fragment size increases, we should be able to read - * data into the skbs directly with very simple code. - * - * ROADMAP: - * - * ENTRY POINTS: - * - * i1480u_rx_setup(): setup RX context [from i1480u_open()] - * - * i1480u_rx_release(): release RX context [from i1480u_stop()] - * - * i1480u_rx_cb(): called when the RX USB URB receives a - * packet. It removes the header and pushes it up - * the Linux netdev stack with netif_rx(). - * - * i1480u_rx_buffer() - * i1480u_drop() and i1480u_fix() - * i1480u_skb_deliver - * - */ - -#include <linux/gfp.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include "i1480u-wlp.h" - -/* - * Setup the RX context - * - * Each URB is provided with a transfer_buffer that is the data field - * of a new socket buffer. - */ -int i1480u_rx_setup(struct i1480u *i1480u) -{ - int result, cnt; - struct device *dev = &i1480u->usb_iface->dev; - struct net_device *net_dev = i1480u->net_dev; - struct usb_endpoint_descriptor *epd; - struct sk_buff *skb; - - /* Alloc RX stuff */ - i1480u->rx_skb = NULL; /* not in process of receiving packet */ - result = -ENOMEM; - epd = &i1480u->usb_iface->cur_altsetting->endpoint[1].desc; - for (cnt = 0; cnt < i1480u_RX_BUFS; cnt++) { - struct i1480u_rx_buf *rx_buf = &i1480u->rx_buf[cnt]; - rx_buf->i1480u = i1480u; - skb = dev_alloc_skb(i1480u_MAX_RX_PKT_SIZE); - if (!skb) { - dev_err(dev, - "RX: cannot allocate RX buffer %d\n", cnt); - result = -ENOMEM; - goto error; - } - skb->dev = net_dev; - skb->ip_summed = CHECKSUM_NONE; - skb_reserve(skb, 2); - rx_buf->data = skb; - rx_buf->urb = usb_alloc_urb(0, GFP_KERNEL); - if (unlikely(rx_buf->urb == NULL)) { - dev_err(dev, "RX: cannot allocate URB %d\n", cnt); - result = -ENOMEM; - goto error; - } - usb_fill_bulk_urb(rx_buf->urb, i1480u->usb_dev, - usb_rcvbulkpipe(i1480u->usb_dev, epd->bEndpointAddress), - rx_buf->data->data, i1480u_MAX_RX_PKT_SIZE - 2, - i1480u_rx_cb, rx_buf); - result = usb_submit_urb(rx_buf->urb, GFP_NOIO); - if (unlikely(result < 0)) { - dev_err(dev, "RX: cannot submit URB %d: %d\n", - cnt, result); - goto error; - } - } - return 0; - -error: - i1480u_rx_release(i1480u); - return result; -} - - -/* Release resources associated to the rx context */ -void i1480u_rx_release(struct i1480u *i1480u) -{ - int cnt; - for (cnt = 0; cnt < i1480u_RX_BUFS; cnt++) { - if (i1480u->rx_buf[cnt].data) - dev_kfree_skb(i1480u->rx_buf[cnt].data); - if (i1480u->rx_buf[cnt].urb) { - usb_kill_urb(i1480u->rx_buf[cnt].urb); - usb_free_urb(i1480u->rx_buf[cnt].urb); - } - } - if (i1480u->rx_skb != NULL) - dev_kfree_skb(i1480u->rx_skb); -} - -static -void i1480u_rx_unlink_urbs(struct i1480u *i1480u) -{ - int cnt; - for (cnt = 0; cnt < i1480u_RX_BUFS; cnt++) { - if (i1480u->rx_buf[cnt].urb) - usb_unlink_urb(i1480u->rx_buf[cnt].urb); - } -} - -/* Fix an out-of-sequence packet */ -#define i1480u_fix(i1480u, msg...) \ -do { \ - if (printk_ratelimit()) \ - dev_err(&i1480u->usb_iface->dev, msg); \ - dev_kfree_skb_irq(i1480u->rx_skb); \ - i1480u->rx_skb = NULL; \ - i1480u->rx_untd_pkt_size = 0; \ -} while (0) - - -/* Drop an out-of-sequence packet */ -#define i1480u_drop(i1480u, msg...) \ -do { \ - if (printk_ratelimit()) \ - dev_err(&i1480u->usb_iface->dev, msg); \ - i1480u->net_dev->stats.rx_dropped++; \ -} while (0) - - - - -/* Finalizes setting up the SKB and delivers it - * - * We first pass the incoming frame to WLP substack for verification. It - * may also be a WLP association frame in which case WLP will take over the - * processing. If WLP does not take it over it will still verify it, if the - * frame is invalid the skb will be freed by WLP and we will not continue - * parsing. - * */ -static -void i1480u_skb_deliver(struct i1480u *i1480u) -{ - int should_parse; - struct net_device *net_dev = i1480u->net_dev; - struct device *dev = &i1480u->usb_iface->dev; - - should_parse = wlp_receive_frame(dev, &i1480u->wlp, i1480u->rx_skb, - &i1480u->rx_srcaddr); - if (!should_parse) - goto out; - i1480u->rx_skb->protocol = eth_type_trans(i1480u->rx_skb, net_dev); - net_dev->stats.rx_packets++; - net_dev->stats.rx_bytes += i1480u->rx_untd_pkt_size; - - netif_rx(i1480u->rx_skb); /* deliver */ -out: - i1480u->rx_skb = NULL; - i1480u->rx_untd_pkt_size = 0; -} - - -/* - * Process a buffer of data received from the USB RX endpoint - * - * First fragment arrives with next or last fragment. All other fragments - * arrive alone. - * - * /me hates long functions. - */ -static -void i1480u_rx_buffer(struct i1480u_rx_buf *rx_buf) -{ - unsigned pkt_completed = 0; /* !0 when we got all pkt fragments */ - size_t untd_hdr_size, untd_frg_size; - size_t i1480u_hdr_size; - struct wlp_rx_hdr *i1480u_hdr = NULL; - - struct i1480u *i1480u = rx_buf->i1480u; - struct sk_buff *skb = rx_buf->data; - int size_left = rx_buf->urb->actual_length; - void *ptr = rx_buf->urb->transfer_buffer; /* also rx_buf->data->data */ - struct untd_hdr *untd_hdr; - - struct net_device *net_dev = i1480u->net_dev; - struct device *dev = &i1480u->usb_iface->dev; - struct sk_buff *new_skb; - -#if 0 - dev_fnstart(dev, - "(i1480u %p ptr %p size_left %zu)\n", i1480u, ptr, size_left); - dev_err(dev, "RX packet, %zu bytes\n", size_left); - dump_bytes(dev, ptr, size_left); -#endif - i1480u_hdr_size = sizeof(struct wlp_rx_hdr); - - while (size_left > 0) { - if (pkt_completed) { - i1480u_drop(i1480u, "RX: fragment follows completed" - "packet in same buffer. Dropping\n"); - break; - } - untd_hdr = ptr; - if (size_left < sizeof(*untd_hdr)) { /* Check the UNTD header */ - i1480u_drop(i1480u, "RX: short UNTD header! Dropping\n"); - goto out; - } - if (unlikely(untd_hdr_rx_tx(untd_hdr) == 0)) { /* Paranoia: TX set? */ - i1480u_drop(i1480u, "RX: TX bit set! Dropping\n"); - goto out; - } - switch (untd_hdr_type(untd_hdr)) { /* Check the UNTD header type */ - case i1480u_PKT_FRAG_1ST: { - struct untd_hdr_1st *untd_hdr_1st = (void *) untd_hdr; - dev_dbg(dev, "1st fragment\n"); - untd_hdr_size = sizeof(struct untd_hdr_1st); - if (i1480u->rx_skb != NULL) - i1480u_fix(i1480u, "RX: 1st fragment out of " - "sequence! Fixing\n"); - if (size_left < untd_hdr_size + i1480u_hdr_size) { - i1480u_drop(i1480u, "RX: short 1st fragment! " - "Dropping\n"); - goto out; - } - i1480u->rx_untd_pkt_size = le16_to_cpu(untd_hdr->len) - - i1480u_hdr_size; - untd_frg_size = le16_to_cpu(untd_hdr_1st->fragment_len); - if (size_left < untd_hdr_size + untd_frg_size) { - i1480u_drop(i1480u, - "RX: short payload! Dropping\n"); - goto out; - } - i1480u->rx_skb = skb; - i1480u_hdr = (void *) untd_hdr_1st + untd_hdr_size; - i1480u->rx_srcaddr = i1480u_hdr->srcaddr; - skb_put(i1480u->rx_skb, untd_hdr_size + untd_frg_size); - skb_pull(i1480u->rx_skb, untd_hdr_size + i1480u_hdr_size); - stats_add_sample(&i1480u->lqe_stats, (s8) i1480u_hdr->LQI - 7); - stats_add_sample(&i1480u->rssi_stats, i1480u_hdr->RSSI + 18); - rx_buf->data = NULL; /* need to create new buffer */ - break; - } - case i1480u_PKT_FRAG_NXT: { - dev_dbg(dev, "nxt fragment\n"); - untd_hdr_size = sizeof(struct untd_hdr_rst); - if (i1480u->rx_skb == NULL) { - i1480u_drop(i1480u, "RX: next fragment out of " - "sequence! Dropping\n"); - goto out; - } - if (size_left < untd_hdr_size) { - i1480u_drop(i1480u, "RX: short NXT fragment! " - "Dropping\n"); - goto out; - } - untd_frg_size = le16_to_cpu(untd_hdr->len); - if (size_left < untd_hdr_size + untd_frg_size) { - i1480u_drop(i1480u, - "RX: short payload! Dropping\n"); - goto out; - } - memmove(skb_put(i1480u->rx_skb, untd_frg_size), - ptr + untd_hdr_size, untd_frg_size); - break; - } - case i1480u_PKT_FRAG_LST: { - dev_dbg(dev, "Lst fragment\n"); - untd_hdr_size = sizeof(struct untd_hdr_rst); - if (i1480u->rx_skb == NULL) { - i1480u_drop(i1480u, "RX: last fragment out of " - "sequence! Dropping\n"); - goto out; - } - if (size_left < untd_hdr_size) { - i1480u_drop(i1480u, "RX: short LST fragment! " - "Dropping\n"); - goto out; - } - untd_frg_size = le16_to_cpu(untd_hdr->len); - if (size_left < untd_frg_size + untd_hdr_size) { - i1480u_drop(i1480u, - "RX: short payload! Dropping\n"); - goto out; - } - memmove(skb_put(i1480u->rx_skb, untd_frg_size), - ptr + untd_hdr_size, untd_frg_size); - pkt_completed = 1; - break; - } - case i1480u_PKT_FRAG_CMP: { - dev_dbg(dev, "cmp fragment\n"); - untd_hdr_size = sizeof(struct untd_hdr_cmp); - if (i1480u->rx_skb != NULL) - i1480u_fix(i1480u, "RX: fix out-of-sequence CMP" - " fragment!\n"); - if (size_left < untd_hdr_size + i1480u_hdr_size) { - i1480u_drop(i1480u, "RX: short CMP fragment! " - "Dropping\n"); - goto out; - } - i1480u->rx_untd_pkt_size = le16_to_cpu(untd_hdr->len); - untd_frg_size = i1480u->rx_untd_pkt_size; - if (size_left < i1480u->rx_untd_pkt_size + untd_hdr_size) { - i1480u_drop(i1480u, - "RX: short payload! Dropping\n"); - goto out; - } - i1480u->rx_skb = skb; - i1480u_hdr = (void *) untd_hdr + untd_hdr_size; - i1480u->rx_srcaddr = i1480u_hdr->srcaddr; - stats_add_sample(&i1480u->lqe_stats, (s8) i1480u_hdr->LQI - 7); - stats_add_sample(&i1480u->rssi_stats, i1480u_hdr->RSSI + 18); - skb_put(i1480u->rx_skb, untd_hdr_size + i1480u->rx_untd_pkt_size); - skb_pull(i1480u->rx_skb, untd_hdr_size + i1480u_hdr_size); - rx_buf->data = NULL; /* for hand off skb to network stack */ - pkt_completed = 1; - i1480u->rx_untd_pkt_size -= i1480u_hdr_size; /* accurate stat */ - break; - } - default: - i1480u_drop(i1480u, "RX: unknown packet type %u! " - "Dropping\n", untd_hdr_type(untd_hdr)); - goto out; - } - size_left -= untd_hdr_size + untd_frg_size; - if (size_left > 0) - ptr += untd_hdr_size + untd_frg_size; - } - if (pkt_completed) - i1480u_skb_deliver(i1480u); -out: - /* recreate needed RX buffers*/ - if (rx_buf->data == NULL) { - /* buffer is being used to receive packet, create new */ - new_skb = dev_alloc_skb(i1480u_MAX_RX_PKT_SIZE); - if (!new_skb) { - if (printk_ratelimit()) - dev_err(dev, - "RX: cannot allocate RX buffer\n"); - } else { - new_skb->dev = net_dev; - new_skb->ip_summed = CHECKSUM_NONE; - skb_reserve(new_skb, 2); - rx_buf->data = new_skb; - } - } - return; -} - - -/* - * Called when an RX URB has finished receiving or has found some kind - * of error condition. - * - * LIMITATIONS: - * - * - We read USB-transfers, each transfer contains a SINGLE fragment - * (can contain a complete packet, or a 1st, next, or last fragment - * of a packet). - * Looks like a transfer can contain more than one fragment (07/18/06) - * - * - Each transfer buffer is the size of the maximum packet size (minus - * headroom), i1480u_MAX_PKT_SIZE - 2 - * - * - We always read the full USB-transfer, no partials. - * - * - Each transfer is read directly into a skb. This skb will be used to - * send data to the upper layers if it is the first fragment or a complete - * packet. In the other cases the data will be copied from the skb to - * another skb that is being prepared for the upper layers from a prev - * first fragment. - * - * It is simply too much of a pain. Gosh, there should be a unified - * SG infrastructure for *everything* [so that I could declare a SG - * buffer, pass it to USB for receiving, append some space to it if - * I wish, receive more until I have the whole chunk, adapt - * pointers on each fragment to remove hardware headers and then - * attach that to an skbuff and netif_rx()]. - */ -void i1480u_rx_cb(struct urb *urb) -{ - int result; - int do_parse_buffer = 1; - struct i1480u_rx_buf *rx_buf = urb->context; - struct i1480u *i1480u = rx_buf->i1480u; - struct device *dev = &i1480u->usb_iface->dev; - unsigned long flags; - u8 rx_buf_idx = rx_buf - i1480u->rx_buf; - - switch (urb->status) { - case 0: - break; - case -ECONNRESET: /* Not an error, but a controlled situation; */ - case -ENOENT: /* (we killed the URB)...so, no broadcast */ - case -ESHUTDOWN: /* going away! */ - dev_err(dev, "RX URB[%u]: goind down %d\n", - rx_buf_idx, urb->status); - goto error; - default: - dev_err(dev, "RX URB[%u]: unknown status %d\n", - rx_buf_idx, urb->status); - if (edc_inc(&i1480u->rx_errors, EDC_MAX_ERRORS, - EDC_ERROR_TIMEFRAME)) { - dev_err(dev, "RX: max acceptable errors exceeded," - " resetting device.\n"); - i1480u_rx_unlink_urbs(i1480u); - wlp_reset_all(&i1480u->wlp); - goto error; - } - do_parse_buffer = 0; - break; - } - spin_lock_irqsave(&i1480u->lock, flags); - /* chew the data fragments, extract network packets */ - if (do_parse_buffer) { - i1480u_rx_buffer(rx_buf); - if (rx_buf->data) { - rx_buf->urb->transfer_buffer = rx_buf->data->data; - result = usb_submit_urb(rx_buf->urb, GFP_ATOMIC); - if (result < 0) { - dev_err(dev, "RX URB[%u]: cannot submit %d\n", - rx_buf_idx, result); - } - } - } - spin_unlock_irqrestore(&i1480u->lock, flags); -error: - return; -} - diff --git a/drivers/uwb/i1480/i1480u-wlp/sysfs.c b/drivers/uwb/i1480/i1480u-wlp/sysfs.c deleted file mode 100644 index 4ffaf546cc6c..000000000000 --- a/drivers/uwb/i1480/i1480u-wlp/sysfs.c +++ /dev/null @@ -1,407 +0,0 @@ -/* - * WUSB Wire Adapter: WLP interface - * Sysfs interfaces - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - * - * FIXME: docs - */ - -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/device.h> - -#include "i1480u-wlp.h" - - -/** - * - * @dev: Class device from the net_device; assumed refcnted. - * - * Yes, I don't lock--we assume it is refcounted and I am getting a - * single byte value that is kind of atomic to read. - */ -ssize_t uwb_phy_rate_show(const struct wlp_options *options, char *buf) -{ - return sprintf(buf, "%u\n", - wlp_tx_hdr_phy_rate(&options->def_tx_hdr)); -} -EXPORT_SYMBOL_GPL(uwb_phy_rate_show); - - -ssize_t uwb_phy_rate_store(struct wlp_options *options, - const char *buf, size_t size) -{ - ssize_t result; - unsigned rate; - - result = sscanf(buf, "%u\n", &rate); - if (result != 1) { - result = -EINVAL; - goto out; - } - result = -EINVAL; - if (rate >= UWB_PHY_RATE_INVALID) - goto out; - wlp_tx_hdr_set_phy_rate(&options->def_tx_hdr, rate); - result = 0; -out: - return result < 0 ? result : size; -} -EXPORT_SYMBOL_GPL(uwb_phy_rate_store); - - -ssize_t uwb_rts_cts_show(const struct wlp_options *options, char *buf) -{ - return sprintf(buf, "%u\n", - wlp_tx_hdr_rts_cts(&options->def_tx_hdr)); -} -EXPORT_SYMBOL_GPL(uwb_rts_cts_show); - - -ssize_t uwb_rts_cts_store(struct wlp_options *options, - const char *buf, size_t size) -{ - ssize_t result; - unsigned value; - - result = sscanf(buf, "%u\n", &value); - if (result != 1) { - result = -EINVAL; - goto out; - } - result = -EINVAL; - wlp_tx_hdr_set_rts_cts(&options->def_tx_hdr, !!value); - result = 0; -out: - return result < 0 ? result : size; -} -EXPORT_SYMBOL_GPL(uwb_rts_cts_store); - - -ssize_t uwb_ack_policy_show(const struct wlp_options *options, char *buf) -{ - return sprintf(buf, "%u\n", - wlp_tx_hdr_ack_policy(&options->def_tx_hdr)); -} -EXPORT_SYMBOL_GPL(uwb_ack_policy_show); - - -ssize_t uwb_ack_policy_store(struct wlp_options *options, - const char *buf, size_t size) -{ - ssize_t result; - unsigned value; - - result = sscanf(buf, "%u\n", &value); - if (result != 1 || value > UWB_ACK_B_REQ) { - result = -EINVAL; - goto out; - } - wlp_tx_hdr_set_ack_policy(&options->def_tx_hdr, value); - result = 0; -out: - return result < 0 ? result : size; -} -EXPORT_SYMBOL_GPL(uwb_ack_policy_store); - - -/** - * Show the PCA base priority. - * - * We can access without locking, as the value is (for now) orthogonal - * to other values. - */ -ssize_t uwb_pca_base_priority_show(const struct wlp_options *options, - char *buf) -{ - return sprintf(buf, "%u\n", - options->pca_base_priority); -} -EXPORT_SYMBOL_GPL(uwb_pca_base_priority_show); - - -/** - * Set the PCA base priority. - * - * We can access without locking, as the value is (for now) orthogonal - * to other values. - */ -ssize_t uwb_pca_base_priority_store(struct wlp_options *options, - const char *buf, size_t size) -{ - ssize_t result = -EINVAL; - u8 pca_base_priority; - - result = sscanf(buf, "%hhu\n", &pca_base_priority); - if (result != 1) { - result = -EINVAL; - goto out; - } - result = -EINVAL; - if (pca_base_priority >= 8) - goto out; - options->pca_base_priority = pca_base_priority; - /* Update TX header if we are currently using PCA. */ - if (result >= 0 && (wlp_tx_hdr_delivery_id_type(&options->def_tx_hdr) & WLP_DRP) == 0) - wlp_tx_hdr_set_delivery_id_type(&options->def_tx_hdr, options->pca_base_priority); - result = 0; -out: - return result < 0 ? result : size; -} -EXPORT_SYMBOL_GPL(uwb_pca_base_priority_store); - -/** - * Show current inflight values - * - * Will print the current MAX and THRESHOLD values for the basic flow - * control. In addition it will report how many times the TX queue needed - * to be restarted since the last time this query was made. - */ -static ssize_t wlp_tx_inflight_show(struct i1480u_tx_inflight *inflight, - char *buf) -{ - ssize_t result; - unsigned long sec_elapsed = (jiffies - inflight->restart_ts)/HZ; - unsigned long restart_count = atomic_read(&inflight->restart_count); - - result = scnprintf(buf, PAGE_SIZE, "%lu %lu %d %lu %lu %lu\n" - "#read: threshold max inflight_count restarts " - "seconds restarts/sec\n" - "#write: threshold max\n", - inflight->threshold, inflight->max, - atomic_read(&inflight->count), - restart_count, sec_elapsed, - sec_elapsed == 0 ? 0 : restart_count/sec_elapsed); - inflight->restart_ts = jiffies; - atomic_set(&inflight->restart_count, 0); - return result; -} - -static -ssize_t wlp_tx_inflight_store(struct i1480u_tx_inflight *inflight, - const char *buf, size_t size) -{ - unsigned long in_threshold, in_max; - ssize_t result; - result = sscanf(buf, "%lu %lu", &in_threshold, &in_max); - if (result != 2) - return -EINVAL; - if (in_max <= in_threshold) - return -EINVAL; - inflight->max = in_max; - inflight->threshold = in_threshold; - return size; -} -/* - * Glue (or function adaptors) for accesing info on sysfs - * - * [we need this indirection because the PCI driver does almost the - * same] - * - * Linux 2.6.21 changed how 'struct netdevice' does attributes (from - * having a 'struct class_dev' to having a 'struct device'). That is - * quite of a pain. - * - * So we try to abstract that here. i1480u_SHOW() and i1480u_STORE() - * create adaptors for extracting the 'struct i1480u' from a 'struct - * dev' and calling a function for doing a sysfs operation (as we have - * them factorized already). i1480u_ATTR creates the attribute file - * (CLASS_DEVICE_ATTR or DEVICE_ATTR) and i1480u_ATTR_NAME produces a - * class_device_attr_NAME or device_attr_NAME (for group registration). - */ - -#define i1480u_SHOW(name, fn, param) \ -static ssize_t i1480u_show_##name(struct device *dev, \ - struct device_attribute *attr,\ - char *buf) \ -{ \ - struct i1480u *i1480u = netdev_priv(to_net_dev(dev)); \ - return fn(&i1480u->param, buf); \ -} - -#define i1480u_STORE(name, fn, param) \ -static ssize_t i1480u_store_##name(struct device *dev, \ - struct device_attribute *attr,\ - const char *buf, size_t size)\ -{ \ - struct i1480u *i1480u = netdev_priv(to_net_dev(dev)); \ - return fn(&i1480u->param, buf, size); \ -} - -#define i1480u_ATTR(name, perm) static DEVICE_ATTR(name, perm, \ - i1480u_show_##name,\ - i1480u_store_##name) - -#define i1480u_ATTR_SHOW(name) static DEVICE_ATTR(name, \ - S_IRUGO, \ - i1480u_show_##name, NULL) - -#define i1480u_ATTR_NAME(a) (dev_attr_##a) - - -/* - * Sysfs adaptors - */ -i1480u_SHOW(uwb_phy_rate, uwb_phy_rate_show, options); -i1480u_STORE(uwb_phy_rate, uwb_phy_rate_store, options); -i1480u_ATTR(uwb_phy_rate, S_IRUGO | S_IWUSR); - -i1480u_SHOW(uwb_rts_cts, uwb_rts_cts_show, options); -i1480u_STORE(uwb_rts_cts, uwb_rts_cts_store, options); -i1480u_ATTR(uwb_rts_cts, S_IRUGO | S_IWUSR); - -i1480u_SHOW(uwb_ack_policy, uwb_ack_policy_show, options); -i1480u_STORE(uwb_ack_policy, uwb_ack_policy_store, options); -i1480u_ATTR(uwb_ack_policy, S_IRUGO | S_IWUSR); - -i1480u_SHOW(uwb_pca_base_priority, uwb_pca_base_priority_show, options); -i1480u_STORE(uwb_pca_base_priority, uwb_pca_base_priority_store, options); -i1480u_ATTR(uwb_pca_base_priority, S_IRUGO | S_IWUSR); - -i1480u_SHOW(wlp_eda, wlp_eda_show, wlp); -i1480u_STORE(wlp_eda, wlp_eda_store, wlp); -i1480u_ATTR(wlp_eda, S_IRUGO | S_IWUSR); - -i1480u_SHOW(wlp_uuid, wlp_uuid_show, wlp); -i1480u_STORE(wlp_uuid, wlp_uuid_store, wlp); -i1480u_ATTR(wlp_uuid, S_IRUGO | S_IWUSR); - -i1480u_SHOW(wlp_dev_name, wlp_dev_name_show, wlp); -i1480u_STORE(wlp_dev_name, wlp_dev_name_store, wlp); -i1480u_ATTR(wlp_dev_name, S_IRUGO | S_IWUSR); - -i1480u_SHOW(wlp_dev_manufacturer, wlp_dev_manufacturer_show, wlp); -i1480u_STORE(wlp_dev_manufacturer, wlp_dev_manufacturer_store, wlp); -i1480u_ATTR(wlp_dev_manufacturer, S_IRUGO | S_IWUSR); - -i1480u_SHOW(wlp_dev_model_name, wlp_dev_model_name_show, wlp); -i1480u_STORE(wlp_dev_model_name, wlp_dev_model_name_store, wlp); -i1480u_ATTR(wlp_dev_model_name, S_IRUGO | S_IWUSR); - -i1480u_SHOW(wlp_dev_model_nr, wlp_dev_model_nr_show, wlp); -i1480u_STORE(wlp_dev_model_nr, wlp_dev_model_nr_store, wlp); -i1480u_ATTR(wlp_dev_model_nr, S_IRUGO | S_IWUSR); - -i1480u_SHOW(wlp_dev_serial, wlp_dev_serial_show, wlp); -i1480u_STORE(wlp_dev_serial, wlp_dev_serial_store, wlp); -i1480u_ATTR(wlp_dev_serial, S_IRUGO | S_IWUSR); - -i1480u_SHOW(wlp_dev_prim_category, wlp_dev_prim_category_show, wlp); -i1480u_STORE(wlp_dev_prim_category, wlp_dev_prim_category_store, wlp); -i1480u_ATTR(wlp_dev_prim_category, S_IRUGO | S_IWUSR); - -i1480u_SHOW(wlp_dev_prim_OUI, wlp_dev_prim_OUI_show, wlp); -i1480u_STORE(wlp_dev_prim_OUI, wlp_dev_prim_OUI_store, wlp); -i1480u_ATTR(wlp_dev_prim_OUI, S_IRUGO | S_IWUSR); - -i1480u_SHOW(wlp_dev_prim_OUI_sub, wlp_dev_prim_OUI_sub_show, wlp); -i1480u_STORE(wlp_dev_prim_OUI_sub, wlp_dev_prim_OUI_sub_store, wlp); -i1480u_ATTR(wlp_dev_prim_OUI_sub, S_IRUGO | S_IWUSR); - -i1480u_SHOW(wlp_dev_prim_subcat, wlp_dev_prim_subcat_show, wlp); -i1480u_STORE(wlp_dev_prim_subcat, wlp_dev_prim_subcat_store, wlp); -i1480u_ATTR(wlp_dev_prim_subcat, S_IRUGO | S_IWUSR); - -i1480u_SHOW(wlp_neighborhood, wlp_neighborhood_show, wlp); -i1480u_ATTR_SHOW(wlp_neighborhood); - -i1480u_SHOW(wss_activate, wlp_wss_activate_show, wlp.wss); -i1480u_STORE(wss_activate, wlp_wss_activate_store, wlp.wss); -i1480u_ATTR(wss_activate, S_IRUGO | S_IWUSR); - -/* - * Show the (min, max, avg) Line Quality Estimate (LQE, in dB) as over - * the last 256 received WLP frames (ECMA-368 13.3). - * - * [the -7dB that have to be substracted from the LQI to make the LQE - * are already taken into account]. - */ -i1480u_SHOW(wlp_lqe, stats_show, lqe_stats); -i1480u_STORE(wlp_lqe, stats_store, lqe_stats); -i1480u_ATTR(wlp_lqe, S_IRUGO | S_IWUSR); - -/* - * Show the Receive Signal Strength Indicator averaged over all the - * received WLP frames (ECMA-368 13.3). Still is not clear what - * this value is, but is kind of a percentage of the signal strength - * at the antenna. - */ -i1480u_SHOW(wlp_rssi, stats_show, rssi_stats); -i1480u_STORE(wlp_rssi, stats_store, rssi_stats); -i1480u_ATTR(wlp_rssi, S_IRUGO | S_IWUSR); - -/** - * We maintain a basic flow control counter. "count" how many TX URBs are - * outstanding. Only allow "max" - * TX URBs to be outstanding. If this value is reached the queue will be - * stopped. The queue will be restarted when there are - * "threshold" URBs outstanding. - */ -i1480u_SHOW(wlp_tx_inflight, wlp_tx_inflight_show, tx_inflight); -i1480u_STORE(wlp_tx_inflight, wlp_tx_inflight_store, tx_inflight); -i1480u_ATTR(wlp_tx_inflight, S_IRUGO | S_IWUSR); - -static struct attribute *i1480u_attrs[] = { - &i1480u_ATTR_NAME(uwb_phy_rate).attr, - &i1480u_ATTR_NAME(uwb_rts_cts).attr, - &i1480u_ATTR_NAME(uwb_ack_policy).attr, - &i1480u_ATTR_NAME(uwb_pca_base_priority).attr, - &i1480u_ATTR_NAME(wlp_lqe).attr, - &i1480u_ATTR_NAME(wlp_rssi).attr, - &i1480u_ATTR_NAME(wlp_eda).attr, - &i1480u_ATTR_NAME(wlp_uuid).attr, - &i1480u_ATTR_NAME(wlp_dev_name).attr, - &i1480u_ATTR_NAME(wlp_dev_manufacturer).attr, - &i1480u_ATTR_NAME(wlp_dev_model_name).attr, - &i1480u_ATTR_NAME(wlp_dev_model_nr).attr, - &i1480u_ATTR_NAME(wlp_dev_serial).attr, - &i1480u_ATTR_NAME(wlp_dev_prim_category).attr, - &i1480u_ATTR_NAME(wlp_dev_prim_OUI).attr, - &i1480u_ATTR_NAME(wlp_dev_prim_OUI_sub).attr, - &i1480u_ATTR_NAME(wlp_dev_prim_subcat).attr, - &i1480u_ATTR_NAME(wlp_neighborhood).attr, - &i1480u_ATTR_NAME(wss_activate).attr, - &i1480u_ATTR_NAME(wlp_tx_inflight).attr, - NULL, -}; - -static struct attribute_group i1480u_attr_group = { - .name = NULL, /* we want them in the same directory */ - .attrs = i1480u_attrs, -}; - -int i1480u_sysfs_setup(struct i1480u *i1480u) -{ - int result; - struct device *dev = &i1480u->usb_iface->dev; - result = sysfs_create_group(&i1480u->net_dev->dev.kobj, - &i1480u_attr_group); - if (result < 0) - dev_err(dev, "cannot initialize sysfs attributes: %d\n", - result); - return result; -} - - -void i1480u_sysfs_release(struct i1480u *i1480u) -{ - sysfs_remove_group(&i1480u->net_dev->dev.kobj, - &i1480u_attr_group); -} diff --git a/drivers/uwb/i1480/i1480u-wlp/tx.c b/drivers/uwb/i1480/i1480u-wlp/tx.c deleted file mode 100644 index 3c117a364564..000000000000 --- a/drivers/uwb/i1480/i1480u-wlp/tx.c +++ /dev/null @@ -1,584 +0,0 @@ -/* - * WUSB Wire Adapter: WLP interface - * Deal with TX (massaging data to transmit, handling it) - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - * - * Transmission engine. Get an skb, create from that a WLP transmit - * context, add a WLP TX header (which we keep prefilled in the - * device's instance), fill out the target-specific fields and - * fire it. - * - * ROADMAP: - * - * Entry points: - * - * i1480u_tx_release(): called by i1480u_disconnect() to release - * pending tx contexts. - * - * i1480u_tx_cb(): callback for TX contexts (USB URBs) - * i1480u_tx_destroy(): - * - * i1480u_tx_timeout(): called for timeout handling from the - * network stack. - * - * i1480u_hard_start_xmit(): called for transmitting an skb from - * the network stack. Will interact with WLP - * substack to verify and prepare frame. - * i1480u_xmit_frame(): actual transmission on hardware - * - * i1480u_tx_create() Creates TX context - * i1480u_tx_create_1() For packets in 1 fragment - * i1480u_tx_create_n() For packets in >1 fragments - * - * TODO: - * - * - FIXME: rewrite using usb_sg_*(), add asynch support to - * usb_sg_*(). It might not make too much sense as most of - * the times the MTU will be smaller than one page... - */ - -#include <linux/slab.h> -#include "i1480u-wlp.h" - -enum { - /* This is only for Next and Last TX packets */ - i1480u_MAX_PL_SIZE = i1480u_MAX_FRG_SIZE - - sizeof(struct untd_hdr_rst), -}; - -/* Free resources allocated to a i1480u tx context. */ -static -void i1480u_tx_free(struct i1480u_tx *wtx) -{ - kfree(wtx->buf); - if (wtx->skb) - dev_kfree_skb_irq(wtx->skb); - usb_free_urb(wtx->urb); - kfree(wtx); -} - -static -void i1480u_tx_destroy(struct i1480u *i1480u, struct i1480u_tx *wtx) -{ - unsigned long flags; - spin_lock_irqsave(&i1480u->tx_list_lock, flags); /* not active any more */ - list_del(&wtx->list_node); - i1480u_tx_free(wtx); - spin_unlock_irqrestore(&i1480u->tx_list_lock, flags); -} - -static -void i1480u_tx_unlink_urbs(struct i1480u *i1480u) -{ - unsigned long flags; - struct i1480u_tx *wtx, *next; - - spin_lock_irqsave(&i1480u->tx_list_lock, flags); - list_for_each_entry_safe(wtx, next, &i1480u->tx_list, list_node) { - usb_unlink_urb(wtx->urb); - } - spin_unlock_irqrestore(&i1480u->tx_list_lock, flags); -} - - -/* - * Callback for a completed tx USB URB. - * - * TODO: - * - * - FIXME: recover errors more gracefully - * - FIXME: handle NAKs (I dont think they come here) for flow ctl - */ -static -void i1480u_tx_cb(struct urb *urb) -{ - struct i1480u_tx *wtx = urb->context; - struct i1480u *i1480u = wtx->i1480u; - struct net_device *net_dev = i1480u->net_dev; - struct device *dev = &i1480u->usb_iface->dev; - unsigned long flags; - - switch (urb->status) { - case 0: - spin_lock_irqsave(&i1480u->lock, flags); - net_dev->stats.tx_packets++; - net_dev->stats.tx_bytes += urb->actual_length; - spin_unlock_irqrestore(&i1480u->lock, flags); - break; - case -ECONNRESET: /* Not an error, but a controlled situation; */ - case -ENOENT: /* (we killed the URB)...so, no broadcast */ - dev_dbg(dev, "notif endp: reset/noent %d\n", urb->status); - netif_stop_queue(net_dev); - break; - case -ESHUTDOWN: /* going away! */ - dev_dbg(dev, "notif endp: down %d\n", urb->status); - netif_stop_queue(net_dev); - break; - default: - dev_err(dev, "TX: unknown URB status %d\n", urb->status); - if (edc_inc(&i1480u->tx_errors, EDC_MAX_ERRORS, - EDC_ERROR_TIMEFRAME)) { - dev_err(dev, "TX: max acceptable errors exceeded." - "Reset device.\n"); - netif_stop_queue(net_dev); - i1480u_tx_unlink_urbs(i1480u); - wlp_reset_all(&i1480u->wlp); - } - break; - } - i1480u_tx_destroy(i1480u, wtx); - if (atomic_dec_return(&i1480u->tx_inflight.count) - <= i1480u->tx_inflight.threshold - && netif_queue_stopped(net_dev) - && i1480u->tx_inflight.threshold != 0) { - netif_start_queue(net_dev); - atomic_inc(&i1480u->tx_inflight.restart_count); - } - return; -} - - -/* - * Given a buffer that doesn't fit in a single fragment, create an - * scatter/gather structure for delivery to the USB pipe. - * - * Implements functionality of i1480u_tx_create(). - * - * @wtx: tx descriptor - * @skb: skb to send - * @gfp_mask: gfp allocation mask - * @returns: Pointer to @wtx if ok, NULL on error. - * - * Sorry, TOO LONG a function, but breaking it up is kind of hard - * - * This will break the buffer in chunks smaller than - * i1480u_MAX_FRG_SIZE (including the header) and add proper headers - * to each: - * - * 1st header \ - * i1480 tx header | fragment 1 - * fragment data / - * nxt header \ fragment 2 - * fragment data / - * .. - * .. - * last header \ fragment 3 - * last fragment data / - * - * This does not fill the i1480 TX header, it is left up to the - * caller to do that; you can get it from @wtx->wlp_tx_hdr. - * - * This function consumes the skb unless there is an error. - */ -static -int i1480u_tx_create_n(struct i1480u_tx *wtx, struct sk_buff *skb, - gfp_t gfp_mask) -{ - int result; - void *pl; - size_t pl_size; - - void *pl_itr, *buf_itr; - size_t pl_size_left, frgs, pl_size_1st, frg_pl_size = 0; - struct untd_hdr_1st *untd_hdr_1st; - struct wlp_tx_hdr *wlp_tx_hdr; - struct untd_hdr_rst *untd_hdr_rst; - - wtx->skb = NULL; - pl = skb->data; - pl_itr = pl; - pl_size = skb->len; - pl_size_left = pl_size; /* payload size */ - /* First fragment; fits as much as i1480u_MAX_FRG_SIZE minus - * the headers */ - pl_size_1st = i1480u_MAX_FRG_SIZE - - sizeof(struct untd_hdr_1st) - sizeof(struct wlp_tx_hdr); - BUG_ON(pl_size_1st > pl_size); - pl_size_left -= pl_size_1st; - /* The rest have an smaller header (no i1480 TX header). We - * need to break up the payload in blocks smaller than - * i1480u_MAX_PL_SIZE (payload excluding header). */ - frgs = (pl_size_left + i1480u_MAX_PL_SIZE - 1) / i1480u_MAX_PL_SIZE; - /* Allocate space for the new buffer. In this new buffer we'll - * place the headers followed by the data fragment, headers, - * data fragments, etc.. - */ - result = -ENOMEM; - wtx->buf_size = sizeof(*untd_hdr_1st) - + sizeof(*wlp_tx_hdr) - + frgs * sizeof(*untd_hdr_rst) - + pl_size; - wtx->buf = kmalloc(wtx->buf_size, gfp_mask); - if (wtx->buf == NULL) - goto error_buf_alloc; - - buf_itr = wtx->buf; /* We got the space, let's fill it up */ - /* Fill 1st fragment */ - untd_hdr_1st = buf_itr; - buf_itr += sizeof(*untd_hdr_1st); - untd_hdr_set_type(&untd_hdr_1st->hdr, i1480u_PKT_FRAG_1ST); - untd_hdr_set_rx_tx(&untd_hdr_1st->hdr, 0); - untd_hdr_1st->hdr.len = cpu_to_le16(pl_size + sizeof(*wlp_tx_hdr)); - untd_hdr_1st->fragment_len = - cpu_to_le16(pl_size_1st + sizeof(*wlp_tx_hdr)); - memset(untd_hdr_1st->padding, 0, sizeof(untd_hdr_1st->padding)); - /* Set up i1480 header info */ - wlp_tx_hdr = wtx->wlp_tx_hdr = buf_itr; - buf_itr += sizeof(*wlp_tx_hdr); - /* Copy the first fragment */ - memcpy(buf_itr, pl_itr, pl_size_1st); - pl_itr += pl_size_1st; - buf_itr += pl_size_1st; - - /* Now do each remaining fragment */ - result = -EINVAL; - while (pl_size_left > 0) { - if (buf_itr + sizeof(*untd_hdr_rst) - wtx->buf - > wtx->buf_size) { - printk(KERN_ERR "BUG: no space for header\n"); - goto error_bug; - } - untd_hdr_rst = buf_itr; - buf_itr += sizeof(*untd_hdr_rst); - if (pl_size_left > i1480u_MAX_PL_SIZE) { - frg_pl_size = i1480u_MAX_PL_SIZE; - untd_hdr_set_type(&untd_hdr_rst->hdr, i1480u_PKT_FRAG_NXT); - } else { - frg_pl_size = pl_size_left; - untd_hdr_set_type(&untd_hdr_rst->hdr, i1480u_PKT_FRAG_LST); - } - untd_hdr_set_rx_tx(&untd_hdr_rst->hdr, 0); - untd_hdr_rst->hdr.len = cpu_to_le16(frg_pl_size); - untd_hdr_rst->padding = 0; - if (buf_itr + frg_pl_size - wtx->buf - > wtx->buf_size) { - printk(KERN_ERR "BUG: no space for payload\n"); - goto error_bug; - } - memcpy(buf_itr, pl_itr, frg_pl_size); - buf_itr += frg_pl_size; - pl_itr += frg_pl_size; - pl_size_left -= frg_pl_size; - } - dev_kfree_skb_irq(skb); - return 0; - -error_bug: - printk(KERN_ERR - "BUG: skb %u bytes\n" - "BUG: frg_pl_size %zd i1480u_MAX_FRG_SIZE %u\n" - "BUG: buf_itr %zu buf_size %zu pl_size_left %zu\n", - skb->len, - frg_pl_size, i1480u_MAX_FRG_SIZE, - buf_itr - wtx->buf, wtx->buf_size, pl_size_left); - - kfree(wtx->buf); -error_buf_alloc: - return result; -} - - -/* - * Given a buffer that fits in a single fragment, fill out a @wtx - * struct for transmitting it down the USB pipe. - * - * Uses the fact that we have space reserved in front of the skbuff - * for hardware headers :] - * - * This does not fill the i1480 TX header, it is left up to the - * caller to do that; you can get it from @wtx->wlp_tx_hdr. - * - * @pl: pointer to payload data - * @pl_size: size of the payuload - * - * This function does not consume the @skb. - */ -static -int i1480u_tx_create_1(struct i1480u_tx *wtx, struct sk_buff *skb, - gfp_t gfp_mask) -{ - struct untd_hdr_cmp *untd_hdr_cmp; - struct wlp_tx_hdr *wlp_tx_hdr; - - wtx->buf = NULL; - wtx->skb = skb; - BUG_ON(skb_headroom(skb) < sizeof(*wlp_tx_hdr)); - wlp_tx_hdr = (void *) __skb_push(skb, sizeof(*wlp_tx_hdr)); - wtx->wlp_tx_hdr = wlp_tx_hdr; - BUG_ON(skb_headroom(skb) < sizeof(*untd_hdr_cmp)); - untd_hdr_cmp = (void *) __skb_push(skb, sizeof(*untd_hdr_cmp)); - - untd_hdr_set_type(&untd_hdr_cmp->hdr, i1480u_PKT_FRAG_CMP); - untd_hdr_set_rx_tx(&untd_hdr_cmp->hdr, 0); - untd_hdr_cmp->hdr.len = cpu_to_le16(skb->len - sizeof(*untd_hdr_cmp)); - untd_hdr_cmp->padding = 0; - return 0; -} - - -/* - * Given a skb to transmit, massage it to become palatable for the TX pipe - * - * This will break the buffer in chunks smaller than - * i1480u_MAX_FRG_SIZE and add proper headers to each. - * - * 1st header \ - * i1480 tx header | fragment 1 - * fragment data / - * nxt header \ fragment 2 - * fragment data / - * .. - * .. - * last header \ fragment 3 - * last fragment data / - * - * Each fragment will be always smaller or equal to i1480u_MAX_FRG_SIZE. - * - * If the first fragment is smaller than i1480u_MAX_FRG_SIZE, then the - * following is composed: - * - * complete header \ - * i1480 tx header | single fragment - * packet data / - * - * We were going to use s/g support, but because the interface is - * synch and at the end there is plenty of overhead to do it, it - * didn't seem that worth for data that is going to be smaller than - * one page. - */ -static -struct i1480u_tx *i1480u_tx_create(struct i1480u *i1480u, - struct sk_buff *skb, gfp_t gfp_mask) -{ - int result; - struct usb_endpoint_descriptor *epd; - int usb_pipe; - unsigned long flags; - - struct i1480u_tx *wtx; - const size_t pl_max_size = - i1480u_MAX_FRG_SIZE - sizeof(struct untd_hdr_cmp) - - sizeof(struct wlp_tx_hdr); - - wtx = kmalloc(sizeof(*wtx), gfp_mask); - if (wtx == NULL) - goto error_wtx_alloc; - wtx->urb = usb_alloc_urb(0, gfp_mask); - if (wtx->urb == NULL) - goto error_urb_alloc; - epd = &i1480u->usb_iface->cur_altsetting->endpoint[2].desc; - usb_pipe = usb_sndbulkpipe(i1480u->usb_dev, epd->bEndpointAddress); - /* Fits in a single complete packet or need to split? */ - if (skb->len > pl_max_size) { - result = i1480u_tx_create_n(wtx, skb, gfp_mask); - if (result < 0) - goto error_create; - usb_fill_bulk_urb(wtx->urb, i1480u->usb_dev, usb_pipe, - wtx->buf, wtx->buf_size, i1480u_tx_cb, wtx); - } else { - result = i1480u_tx_create_1(wtx, skb, gfp_mask); - if (result < 0) - goto error_create; - usb_fill_bulk_urb(wtx->urb, i1480u->usb_dev, usb_pipe, - skb->data, skb->len, i1480u_tx_cb, wtx); - } - spin_lock_irqsave(&i1480u->tx_list_lock, flags); - list_add(&wtx->list_node, &i1480u->tx_list); - spin_unlock_irqrestore(&i1480u->tx_list_lock, flags); - return wtx; - -error_create: - kfree(wtx->urb); -error_urb_alloc: - kfree(wtx); -error_wtx_alloc: - return NULL; -} - -/* - * Actual fragmentation and transmission of frame - * - * @wlp: WLP substack data structure - * @skb: To be transmitted - * @dst: Device address of destination - * @returns: 0 on success, <0 on failure - * - * This function can also be called directly (not just from - * hard_start_xmit), so we also check here if the interface is up before - * taking sending anything. - */ -int i1480u_xmit_frame(struct wlp *wlp, struct sk_buff *skb, - struct uwb_dev_addr *dst) -{ - int result = -ENXIO; - struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp); - struct device *dev = &i1480u->usb_iface->dev; - struct net_device *net_dev = i1480u->net_dev; - struct i1480u_tx *wtx; - struct wlp_tx_hdr *wlp_tx_hdr; - static unsigned char dev_bcast[2] = { 0xff, 0xff }; - - BUG_ON(i1480u->wlp.rc == NULL); - if ((net_dev->flags & IFF_UP) == 0) - goto out; - result = -EBUSY; - if (atomic_read(&i1480u->tx_inflight.count) >= i1480u->tx_inflight.max) { - netif_stop_queue(net_dev); - goto error_max_inflight; - } - result = -ENOMEM; - wtx = i1480u_tx_create(i1480u, skb, GFP_ATOMIC); - if (unlikely(wtx == NULL)) { - if (printk_ratelimit()) - dev_err(dev, "TX: no memory for WLP TX URB," - "dropping packet (in flight %d)\n", - atomic_read(&i1480u->tx_inflight.count)); - netif_stop_queue(net_dev); - goto error_wtx_alloc; - } - wtx->i1480u = i1480u; - /* Fill out the i1480 header; @i1480u->def_tx_hdr read without - * locking. We do so because they are kind of orthogonal to - * each other (and thus not changed in an atomic batch). - * The ETH header is right after the WLP TX header. */ - wlp_tx_hdr = wtx->wlp_tx_hdr; - *wlp_tx_hdr = i1480u->options.def_tx_hdr; - wlp_tx_hdr->dstaddr = *dst; - if (!memcmp(&wlp_tx_hdr->dstaddr, dev_bcast, sizeof(dev_bcast)) - && (wlp_tx_hdr_delivery_id_type(wlp_tx_hdr) & WLP_DRP)) { - /*Broadcast message directed to DRP host. Send as best effort - * on PCA. */ - wlp_tx_hdr_set_delivery_id_type(wlp_tx_hdr, i1480u->options.pca_base_priority); - } - - result = usb_submit_urb(wtx->urb, GFP_ATOMIC); /* Go baby */ - if (result < 0) { - dev_err(dev, "TX: cannot submit URB: %d\n", result); - /* We leave the freeing of skb to calling function */ - wtx->skb = NULL; - goto error_tx_urb_submit; - } - atomic_inc(&i1480u->tx_inflight.count); - net_dev->trans_start = jiffies; - return result; - -error_tx_urb_submit: - i1480u_tx_destroy(i1480u, wtx); -error_wtx_alloc: -error_max_inflight: -out: - return result; -} - - -/* - * Transmit an skb Called when an skbuf has to be transmitted - * - * The skb is first passed to WLP substack to ensure this is a valid - * frame. If valid the device address of destination will be filled and - * the WLP header prepended to the skb. If this step fails we fake sending - * the frame, if we return an error the network stack will just keep trying. - * - * Broadcast frames inside a WSS needs to be treated special as multicast is - * not supported. A broadcast frame is sent as unicast to each member of the - * WSS - this is done by the WLP substack when it finds a broadcast frame. - * So, we test if the WLP substack took over the skb and only transmit it - * if it has not (been taken over). - * - * @net_dev->xmit_lock is held - */ -netdev_tx_t i1480u_hard_start_xmit(struct sk_buff *skb, - struct net_device *net_dev) -{ - int result; - struct i1480u *i1480u = netdev_priv(net_dev); - struct device *dev = &i1480u->usb_iface->dev; - struct uwb_dev_addr dst; - - if ((net_dev->flags & IFF_UP) == 0) - goto error; - result = wlp_prepare_tx_frame(dev, &i1480u->wlp, skb, &dst); - if (result < 0) { - dev_err(dev, "WLP verification of TX frame failed (%d). " - "Dropping packet.\n", result); - goto error; - } else if (result == 1) { - /* trans_start time will be set when WLP actually transmits - * the frame */ - goto out; - } - result = i1480u_xmit_frame(&i1480u->wlp, skb, &dst); - if (result < 0) { - dev_err(dev, "Frame TX failed (%d).\n", result); - goto error; - } - return NETDEV_TX_OK; -error: - dev_kfree_skb_any(skb); - net_dev->stats.tx_dropped++; -out: - return NETDEV_TX_OK; -} - - -/* - * Called when a pkt transmission doesn't complete in a reasonable period - * Device reset may sleep - do it outside of interrupt context (delayed) - */ -void i1480u_tx_timeout(struct net_device *net_dev) -{ - struct i1480u *i1480u = netdev_priv(net_dev); - - wlp_reset_all(&i1480u->wlp); -} - - -void i1480u_tx_release(struct i1480u *i1480u) -{ - unsigned long flags; - struct i1480u_tx *wtx, *next; - int count = 0, empty; - - spin_lock_irqsave(&i1480u->tx_list_lock, flags); - list_for_each_entry_safe(wtx, next, &i1480u->tx_list, list_node) { - count++; - usb_unlink_urb(wtx->urb); - } - spin_unlock_irqrestore(&i1480u->tx_list_lock, flags); - count = count*10; /* i1480ut 200ms per unlinked urb (intervals of 20ms) */ - /* - * We don't like this sollution too much (dirty as it is), but - * it is cheaper than putting a refcount on each i1480u_tx and - * i1480uting for all of them to go away... - * - * Called when no more packets can be added to tx_list - * so can i1480ut for it to be empty. - */ - while (1) { - spin_lock_irqsave(&i1480u->tx_list_lock, flags); - empty = list_empty(&i1480u->tx_list); - spin_unlock_irqrestore(&i1480u->tx_list_lock, flags); - if (empty) - break; - count--; - BUG_ON(count == 0); - msleep(20); - } -} diff --git a/drivers/uwb/wlp/Makefile b/drivers/uwb/wlp/Makefile deleted file mode 100644 index c72c11db5b1b..000000000000 --- a/drivers/uwb/wlp/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -obj-$(CONFIG_UWB_WLP) := wlp.o - -wlp-objs := \ - driver.o \ - eda.o \ - messages.o \ - sysfs.o \ - txrx.o \ - wlp-lc.o \ - wss-lc.o diff --git a/drivers/uwb/wlp/driver.c b/drivers/uwb/wlp/driver.c deleted file mode 100644 index cb8d699b6a67..000000000000 --- a/drivers/uwb/wlp/driver.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * WiMedia Logical Link Control Protocol (WLP) - * - * Copyright (C) 2007 Intel Corporation - * Reinette Chatre <reinette.chatre@intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - * - * Life cycle of WLP substack - * - * FIXME: Docs - */ - -#include <linux/module.h> - -static int __init wlp_subsys_init(void) -{ - return 0; -} -module_init(wlp_subsys_init); - -static void __exit wlp_subsys_exit(void) -{ - return; -} -module_exit(wlp_subsys_exit); - -MODULE_AUTHOR("Reinette Chatre <reinette.chatre@intel.com>"); -MODULE_DESCRIPTION("WiMedia Logical Link Control Protocol (WLP)"); -MODULE_LICENSE("GPL"); diff --git a/drivers/uwb/wlp/eda.c b/drivers/uwb/wlp/eda.c deleted file mode 100644 index 086fc0cf9401..000000000000 --- a/drivers/uwb/wlp/eda.c +++ /dev/null @@ -1,415 +0,0 @@ -/* - * WUSB Wire Adapter: WLP interface - * Ethernet to device address cache - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - * - * We need to be able to map ethernet addresses to device addresses - * and back because there is not explicit relationship between the eth - * addresses used in the ETH frames and the device addresses (no, it - * would not have been simpler to force as ETH address the MBOA MAC - * address...no, not at all :). - * - * A device has one MBOA MAC address and one device address. It is possible - * for a device to have more than one virtual MAC address (although a - * virtual address can be the same as the MBOA MAC address). The device - * address is guaranteed to be unique among the devices in the extended - * beacon group (see ECMA 17.1.1). We thus use the device address as index - * to this cache. We do allow searching based on virtual address as this - * is how Ethernet frames will be addressed. - * - * We need to support virtual EUI-48. Although, right now the virtual - * EUI-48 will always be the same as the MAC SAP address. The EDA cache - * entry thus contains a MAC SAP address as well as the virtual address - * (used to map the network stack address to a neighbor). When we move - * to support more than one virtual MAC on a host then this organization - * will have to change. Perhaps a neighbor has a list of WSSs, each with a - * tag and virtual EUI-48. - * - * On data transmission - * it is used to determine if the neighbor is connected and what WSS it - * belongs to. With this we know what tag to add to the WLP frame. Storing - * the WSS in the EDA cache may be overkill because we only support one - * WSS. Hopefully we will support more than one WSS at some point. - * On data reception it is used to determine the WSS based on - * the tag and address of the transmitting neighbor. - */ - -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/slab.h> -#include <linux/wlp.h> -#include "wlp-internal.h" - - -/* FIXME: cache is not purged, only on device close */ - -/* FIXME: does not scale, change to dynamic array */ - -/* - * Initialize the EDA cache - * - * @returns 0 if ok, < 0 errno code on error - * - * Call when the interface is being brought up - * - * NOTE: Keep it as a separate function as the implementation will - * change and be more complex. - */ -void wlp_eda_init(struct wlp_eda *eda) -{ - INIT_LIST_HEAD(&eda->cache); - spin_lock_init(&eda->lock); -} - -/* - * Release the EDA cache - * - * @returns 0 if ok, < 0 errno code on error - * - * Called when the interface is brought down - */ -void wlp_eda_release(struct wlp_eda *eda) -{ - unsigned long flags; - struct wlp_eda_node *itr, *next; - - spin_lock_irqsave(&eda->lock, flags); - list_for_each_entry_safe(itr, next, &eda->cache, list_node) { - list_del(&itr->list_node); - kfree(itr); - } - spin_unlock_irqrestore(&eda->lock, flags); -} - -/* - * Add an address mapping - * - * @returns 0 if ok, < 0 errno code on error - * - * An address mapping is initially created when the neighbor device is seen - * for the first time (it is "onair"). At this time the neighbor is not - * connected or associated with a WSS so we only populate the Ethernet and - * Device address fields. - * - */ -int wlp_eda_create_node(struct wlp_eda *eda, - const unsigned char eth_addr[ETH_ALEN], - const struct uwb_dev_addr *dev_addr) -{ - int result = 0; - struct wlp_eda_node *itr; - unsigned long flags; - - BUG_ON(dev_addr == NULL || eth_addr == NULL); - spin_lock_irqsave(&eda->lock, flags); - list_for_each_entry(itr, &eda->cache, list_node) { - if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { - printk(KERN_ERR "EDA cache already contains entry " - "for neighbor %02x:%02x\n", - dev_addr->data[1], dev_addr->data[0]); - result = -EEXIST; - goto out_unlock; - } - } - itr = kzalloc(sizeof(*itr), GFP_ATOMIC); - if (itr != NULL) { - memcpy(itr->eth_addr, eth_addr, sizeof(itr->eth_addr)); - itr->dev_addr = *dev_addr; - list_add(&itr->list_node, &eda->cache); - } else - result = -ENOMEM; -out_unlock: - spin_unlock_irqrestore(&eda->lock, flags); - return result; -} - -/* - * Remove entry from EDA cache - * - * This is done when the device goes off air. - */ -void wlp_eda_rm_node(struct wlp_eda *eda, const struct uwb_dev_addr *dev_addr) -{ - struct wlp_eda_node *itr, *next; - unsigned long flags; - - spin_lock_irqsave(&eda->lock, flags); - list_for_each_entry_safe(itr, next, &eda->cache, list_node) { - if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { - list_del(&itr->list_node); - kfree(itr); - break; - } - } - spin_unlock_irqrestore(&eda->lock, flags); -} - -/* - * Update an address mapping - * - * @returns 0 if ok, < 0 errno code on error - */ -int wlp_eda_update_node(struct wlp_eda *eda, - const struct uwb_dev_addr *dev_addr, - struct wlp_wss *wss, - const unsigned char virt_addr[ETH_ALEN], - const u8 tag, const enum wlp_wss_connect state) -{ - int result = -ENOENT; - struct wlp_eda_node *itr; - unsigned long flags; - - spin_lock_irqsave(&eda->lock, flags); - list_for_each_entry(itr, &eda->cache, list_node) { - if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { - /* Found it, update it */ - itr->wss = wss; - memcpy(itr->virt_addr, virt_addr, - sizeof(itr->virt_addr)); - itr->tag = tag; - itr->state = state; - result = 0; - goto out_unlock; - } - } - /* Not found */ -out_unlock: - spin_unlock_irqrestore(&eda->lock, flags); - return result; -} - -/* - * Update only state field of an address mapping - * - * @returns 0 if ok, < 0 errno code on error - */ -int wlp_eda_update_node_state(struct wlp_eda *eda, - const struct uwb_dev_addr *dev_addr, - const enum wlp_wss_connect state) -{ - int result = -ENOENT; - struct wlp_eda_node *itr; - unsigned long flags; - - spin_lock_irqsave(&eda->lock, flags); - list_for_each_entry(itr, &eda->cache, list_node) { - if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { - /* Found it, update it */ - itr->state = state; - result = 0; - goto out_unlock; - } - } - /* Not found */ -out_unlock: - spin_unlock_irqrestore(&eda->lock, flags); - return result; -} - -/* - * Return contents of EDA cache entry - * - * @dev_addr: index to EDA cache - * @eda_entry: pointer to where contents of EDA cache will be copied - */ -int wlp_copy_eda_node(struct wlp_eda *eda, struct uwb_dev_addr *dev_addr, - struct wlp_eda_node *eda_entry) -{ - int result = -ENOENT; - struct wlp_eda_node *itr; - unsigned long flags; - - spin_lock_irqsave(&eda->lock, flags); - list_for_each_entry(itr, &eda->cache, list_node) { - if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { - *eda_entry = *itr; - result = 0; - goto out_unlock; - } - } - /* Not found */ -out_unlock: - spin_unlock_irqrestore(&eda->lock, flags); - return result; -} - -/* - * Execute function for every element in the cache - * - * @function: function to execute on element of cache (must be atomic) - * @priv: private data of function - * @returns: result of first function that failed, or last function - * executed if no function failed. - * - * Stop executing when function returns error for any element in cache. - * - * IMPORTANT: We are using a spinlock here: the function executed on each - * element has to be atomic. - */ -int wlp_eda_for_each(struct wlp_eda *eda, wlp_eda_for_each_f function, - void *priv) -{ - int result = 0; - struct wlp *wlp = container_of(eda, struct wlp, eda); - struct wlp_eda_node *entry; - unsigned long flags; - - spin_lock_irqsave(&eda->lock, flags); - list_for_each_entry(entry, &eda->cache, list_node) { - result = (*function)(wlp, entry, priv); - if (result < 0) - break; - } - spin_unlock_irqrestore(&eda->lock, flags); - return result; -} - -/* - * Execute function for single element in the cache (return dev addr) - * - * @virt_addr: index into EDA cache used to determine which element to - * execute the function on - * @dev_addr: device address of element in cache will be returned using - * @dev_addr - * @function: function to execute on element of cache (must be atomic) - * @priv: private data of function - * @returns: result of function - * - * IMPORTANT: We are using a spinlock here: the function executed on the - * element has to be atomic. - */ -int wlp_eda_for_virtual(struct wlp_eda *eda, - const unsigned char virt_addr[ETH_ALEN], - struct uwb_dev_addr *dev_addr, - wlp_eda_for_each_f function, - void *priv) -{ - int result = 0; - struct wlp *wlp = container_of(eda, struct wlp, eda); - struct wlp_eda_node *itr; - unsigned long flags; - int found = 0; - - spin_lock_irqsave(&eda->lock, flags); - list_for_each_entry(itr, &eda->cache, list_node) { - if (!memcmp(itr->virt_addr, virt_addr, - sizeof(itr->virt_addr))) { - result = (*function)(wlp, itr, priv); - *dev_addr = itr->dev_addr; - found = 1; - break; - } - } - if (!found) - result = -ENODEV; - spin_unlock_irqrestore(&eda->lock, flags); - return result; -} - -static const char *__wlp_wss_connect_state[] = { "WLP_WSS_UNCONNECTED", - "WLP_WSS_CONNECTED", - "WLP_WSS_CONNECT_FAILED", -}; - -static const char *wlp_wss_connect_state_str(unsigned id) -{ - if (id >= ARRAY_SIZE(__wlp_wss_connect_state)) - return "unknown WSS connection state"; - return __wlp_wss_connect_state[id]; -} - -/* - * View EDA cache from user space - * - * A debugging feature to give user visibility into the EDA cache. Also - * used to display members of WSS to user (called from wlp_wss_members_show()) - */ -ssize_t wlp_eda_show(struct wlp *wlp, char *buf) -{ - ssize_t result = 0; - struct wlp_eda_node *entry; - unsigned long flags; - struct wlp_eda *eda = &wlp->eda; - spin_lock_irqsave(&eda->lock, flags); - result = scnprintf(buf, PAGE_SIZE, "#eth_addr dev_addr wss_ptr " - "tag state virt_addr\n"); - list_for_each_entry(entry, &eda->cache, list_node) { - result += scnprintf(buf + result, PAGE_SIZE - result, - "%pM %02x:%02x %p 0x%02x %s %pM\n", - entry->eth_addr, - entry->dev_addr.data[1], - entry->dev_addr.data[0], entry->wss, - entry->tag, - wlp_wss_connect_state_str(entry->state), - entry->virt_addr); - if (result >= PAGE_SIZE) - break; - } - spin_unlock_irqrestore(&eda->lock, flags); - return result; -} -EXPORT_SYMBOL_GPL(wlp_eda_show); - -/* - * Add new EDA cache entry based on user input in sysfs - * - * Should only be used for debugging. - * - * The WSS is assumed to be the only WSS supported. This needs to be - * redesigned when we support more than one WSS. - */ -ssize_t wlp_eda_store(struct wlp *wlp, const char *buf, size_t size) -{ - ssize_t result; - struct wlp_eda *eda = &wlp->eda; - u8 eth_addr[6]; - struct uwb_dev_addr dev_addr; - u8 tag; - unsigned state; - - result = sscanf(buf, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx " - "%02hhx:%02hhx %02hhx %u\n", - ð_addr[0], ð_addr[1], - ð_addr[2], ð_addr[3], - ð_addr[4], ð_addr[5], - &dev_addr.data[1], &dev_addr.data[0], &tag, &state); - switch (result) { - case 6: /* no dev addr specified -- remove entry NOT IMPLEMENTED */ - /*result = wlp_eda_rm(eda, eth_addr, &dev_addr);*/ - result = -ENOSYS; - break; - case 10: - state = state >= 1 ? 1 : 0; - result = wlp_eda_create_node(eda, eth_addr, &dev_addr); - if (result < 0 && result != -EEXIST) - goto error; - /* Set virtual addr to be same as MAC */ - result = wlp_eda_update_node(eda, &dev_addr, &wlp->wss, - eth_addr, tag, state); - if (result < 0) - goto error; - break; - default: /* bad format */ - result = -EINVAL; - } -error: - return result < 0 ? result : size; -} -EXPORT_SYMBOL_GPL(wlp_eda_store); diff --git a/drivers/uwb/wlp/messages.c b/drivers/uwb/wlp/messages.c deleted file mode 100644 index 3a8e033dce21..000000000000 --- a/drivers/uwb/wlp/messages.c +++ /dev/null @@ -1,1798 +0,0 @@ -/* - * WiMedia Logical Link Control Protocol (WLP) - * Message construction and parsing - * - * Copyright (C) 2007 Intel Corporation - * Reinette Chatre <reinette.chatre@intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - * - * FIXME: docs - */ - -#include <linux/wlp.h> -#include <linux/slab.h> - -#include "wlp-internal.h" - -static -const char *__wlp_assoc_frame[] = { - [WLP_ASSOC_D1] = "WLP_ASSOC_D1", - [WLP_ASSOC_D2] = "WLP_ASSOC_D2", - [WLP_ASSOC_M1] = "WLP_ASSOC_M1", - [WLP_ASSOC_M2] = "WLP_ASSOC_M2", - [WLP_ASSOC_M3] = "WLP_ASSOC_M3", - [WLP_ASSOC_M4] = "WLP_ASSOC_M4", - [WLP_ASSOC_M5] = "WLP_ASSOC_M5", - [WLP_ASSOC_M6] = "WLP_ASSOC_M6", - [WLP_ASSOC_M7] = "WLP_ASSOC_M7", - [WLP_ASSOC_M8] = "WLP_ASSOC_M8", - [WLP_ASSOC_F0] = "WLP_ASSOC_F0", - [WLP_ASSOC_E1] = "WLP_ASSOC_E1", - [WLP_ASSOC_E2] = "WLP_ASSOC_E2", - [WLP_ASSOC_C1] = "WLP_ASSOC_C1", - [WLP_ASSOC_C2] = "WLP_ASSOC_C2", - [WLP_ASSOC_C3] = "WLP_ASSOC_C3", - [WLP_ASSOC_C4] = "WLP_ASSOC_C4", -}; - -static const char *wlp_assoc_frame_str(unsigned id) -{ - if (id >= ARRAY_SIZE(__wlp_assoc_frame)) - return "unknown association frame"; - return __wlp_assoc_frame[id]; -} - -static const char *__wlp_assc_error[] = { - "none", - "Authenticator Failure", - "Rogue activity suspected", - "Device busy", - "Setup Locked", - "Registrar not ready", - "Invalid WSS selection", - "Message timeout", - "Enrollment session timeout", - "Device password invalid", - "Unsupported version", - "Internal error", - "Undefined error", - "Numeric comparison failure", - "Waiting for user input", -}; - -static const char *wlp_assc_error_str(unsigned id) -{ - if (id >= ARRAY_SIZE(__wlp_assc_error)) - return "unknown WLP association error"; - return __wlp_assc_error[id]; -} - -static inline void wlp_set_attr_hdr(struct wlp_attr_hdr *hdr, unsigned type, - size_t len) -{ - hdr->type = cpu_to_le16(type); - hdr->length = cpu_to_le16(len); -} - -/* - * Populate fields of a constant sized attribute - * - * @returns: total size of attribute including size of new value - * - * We have two instances of this function (wlp_pset and wlp_set): one takes - * the value as a parameter, the other takes a pointer to the value as - * parameter. They thus only differ in how the value is assigned to the - * attribute. - * - * We use sizeof(*attr) - sizeof(struct wlp_attr_hdr) instead of - * sizeof(type) to be able to use this same code for the structures that - * contain 8bit enum values and be able to deal with pointer types. - */ -#define wlp_set(type, type_code, name) \ -static size_t wlp_set_##name(struct wlp_attr_##name *attr, type value) \ -{ \ - wlp_set_attr_hdr(&attr->hdr, type_code, \ - sizeof(*attr) - sizeof(struct wlp_attr_hdr)); \ - attr->name = value; \ - return sizeof(*attr); \ -} - -#define wlp_pset(type, type_code, name) \ -static size_t wlp_set_##name(struct wlp_attr_##name *attr, type value) \ -{ \ - wlp_set_attr_hdr(&attr->hdr, type_code, \ - sizeof(*attr) - sizeof(struct wlp_attr_hdr)); \ - attr->name = *value; \ - return sizeof(*attr); \ -} - -/** - * Populate fields of a variable attribute - * - * @returns: total size of attribute including size of new value - * - * Provided with a pointer to the memory area reserved for the - * attribute structure, the field is populated with the value. The - * reserved memory has to contain enough space for the value. - */ -#define wlp_vset(type, type_code, name) \ -static size_t wlp_set_##name(struct wlp_attr_##name *attr, type value, \ - size_t len) \ -{ \ - wlp_set_attr_hdr(&attr->hdr, type_code, len); \ - memcpy(attr->name, value, len); \ - return sizeof(*attr) + len; \ -} - -wlp_vset(char *, WLP_ATTR_DEV_NAME, dev_name) -wlp_vset(char *, WLP_ATTR_MANUF, manufacturer) -wlp_set(enum wlp_assoc_type, WLP_ATTR_MSG_TYPE, msg_type) -wlp_vset(char *, WLP_ATTR_MODEL_NAME, model_name) -wlp_vset(char *, WLP_ATTR_MODEL_NR, model_nr) -wlp_vset(char *, WLP_ATTR_SERIAL, serial) -wlp_vset(char *, WLP_ATTR_WSS_NAME, wss_name) -wlp_pset(struct wlp_uuid *, WLP_ATTR_UUID_E, uuid_e) -wlp_pset(struct wlp_uuid *, WLP_ATTR_UUID_R, uuid_r) -wlp_pset(struct wlp_uuid *, WLP_ATTR_WSSID, wssid) -wlp_pset(struct wlp_dev_type *, WLP_ATTR_PRI_DEV_TYPE, prim_dev_type) -/*wlp_pset(struct wlp_dev_type *, WLP_ATTR_SEC_DEV_TYPE, sec_dev_type)*/ -wlp_set(u8, WLP_ATTR_WLP_VER, version) -wlp_set(enum wlp_assc_error, WLP_ATTR_WLP_ASSC_ERR, wlp_assc_err) -wlp_set(enum wlp_wss_sel_mthd, WLP_ATTR_WSS_SEL_MTHD, wss_sel_mthd) -wlp_set(u8, WLP_ATTR_ACC_ENRL, accept_enrl) -wlp_set(u8, WLP_ATTR_WSS_SEC_STAT, wss_sec_status) -wlp_pset(struct uwb_mac_addr *, WLP_ATTR_WSS_BCAST, wss_bcast) -wlp_pset(struct wlp_nonce *, WLP_ATTR_ENRL_NONCE, enonce) -wlp_pset(struct wlp_nonce *, WLP_ATTR_REG_NONCE, rnonce) -wlp_set(u8, WLP_ATTR_WSS_TAG, wss_tag) -wlp_pset(struct uwb_mac_addr *, WLP_ATTR_WSS_VIRT, wss_virt) - -/** - * Fill in the WSS information attributes - * - * We currently only support one WSS, and this is assumed in this function - * that can populate only one WSS information attribute. - */ -static size_t wlp_set_wss_info(struct wlp_attr_wss_info *attr, - struct wlp_wss *wss) -{ - size_t datalen; - void *ptr = attr->wss_info; - size_t used = sizeof(*attr); - - datalen = sizeof(struct wlp_wss_info) + strlen(wss->name); - wlp_set_attr_hdr(&attr->hdr, WLP_ATTR_WSS_INFO, datalen); - used = wlp_set_wssid(ptr, &wss->wssid); - used += wlp_set_wss_name(ptr + used, wss->name, strlen(wss->name)); - used += wlp_set_accept_enrl(ptr + used, wss->accept_enroll); - used += wlp_set_wss_sec_status(ptr + used, wss->secure_status); - used += wlp_set_wss_bcast(ptr + used, &wss->bcast); - return sizeof(*attr) + used; -} - -/** - * Verify attribute header - * - * @hdr: Pointer to attribute header that will be verified. - * @type: Expected attribute type. - * @len: Expected length of attribute value (excluding header). - * - * Most attribute values have a known length even when they do have a - * length field. This knowledge can be used via this function to verify - * that the length field matches the expected value. - */ -static int wlp_check_attr_hdr(struct wlp *wlp, struct wlp_attr_hdr *hdr, - enum wlp_attr_type type, unsigned len) -{ - struct device *dev = &wlp->rc->uwb_dev.dev; - - if (le16_to_cpu(hdr->type) != type) { - dev_err(dev, "WLP: unexpected header type. Expected " - "%u, got %u.\n", type, le16_to_cpu(hdr->type)); - return -EINVAL; - } - if (le16_to_cpu(hdr->length) != len) { - dev_err(dev, "WLP: unexpected length in header. Expected " - "%u, got %u.\n", len, le16_to_cpu(hdr->length)); - return -EINVAL; - } - return 0; -} - -/** - * Check if header of WSS information attribute valid - * - * @returns: length of WSS attributes (value of length attribute field) if - * valid WSS information attribute found - * -ENODATA if no WSS information attribute found - * -EIO other error occured - * - * The WSS information attribute is optional. The function will be provided - * with a pointer to data that could _potentially_ be a WSS information - * attribute. If a valid WSS information attribute is found it will return - * 0, if no WSS information attribute is found it will return -ENODATA, and - * another error will be returned if it is a WSS information attribute, but - * some parsing failure occured. - */ -static int wlp_check_wss_info_attr_hdr(struct wlp *wlp, - struct wlp_attr_hdr *hdr, size_t buflen) -{ - struct device *dev = &wlp->rc->uwb_dev.dev; - size_t len; - int result = 0; - - if (buflen < sizeof(*hdr)) { - dev_err(dev, "WLP: Not enough space in buffer to parse" - " WSS information attribute header.\n"); - result = -EIO; - goto out; - } - if (le16_to_cpu(hdr->type) != WLP_ATTR_WSS_INFO) { - /* WSS information is optional */ - result = -ENODATA; - goto out; - } - len = le16_to_cpu(hdr->length); - if (buflen < sizeof(*hdr) + len) { - dev_err(dev, "WLP: Not enough space in buffer to parse " - "variable data. Got %d, expected %d.\n", - (int)buflen, (int)(sizeof(*hdr) + len)); - result = -EIO; - goto out; - } - result = len; -out: - return result; -} - - -static ssize_t wlp_get_attribute(struct wlp *wlp, u16 type_code, - struct wlp_attr_hdr *attr_hdr, void *value, ssize_t value_len, - ssize_t buflen) -{ - struct device *dev = &wlp->rc->uwb_dev.dev; - ssize_t attr_len = sizeof(*attr_hdr) + value_len; - if (buflen < 0) - return -EINVAL; - if (buflen < attr_len) { - dev_err(dev, "WLP: Not enough space in buffer to parse" - " attribute field. Need %d, received %zu\n", - (int)attr_len, buflen); - return -EIO; - } - if (wlp_check_attr_hdr(wlp, attr_hdr, type_code, value_len) < 0) { - dev_err(dev, "WLP: Header verification failed. \n"); - return -EINVAL; - } - memcpy(value, (void *)attr_hdr + sizeof(*attr_hdr), value_len); - return attr_len; -} - -static ssize_t wlp_vget_attribute(struct wlp *wlp, u16 type_code, - struct wlp_attr_hdr *attr_hdr, void *value, ssize_t max_value_len, - ssize_t buflen) -{ - struct device *dev = &wlp->rc->uwb_dev.dev; - size_t len; - if (buflen < 0) - return -EINVAL; - if (buflen < sizeof(*attr_hdr)) { - dev_err(dev, "WLP: Not enough space in buffer to parse" - " header.\n"); - return -EIO; - } - if (le16_to_cpu(attr_hdr->type) != type_code) { - dev_err(dev, "WLP: Unexpected attribute type. Got %u, " - "expected %u.\n", le16_to_cpu(attr_hdr->type), - type_code); - return -EINVAL; - } - len = le16_to_cpu(attr_hdr->length); - if (len > max_value_len) { - dev_err(dev, "WLP: Attribute larger than maximum " - "allowed. Received %zu, max is %d.\n", len, - (int)max_value_len); - return -EFBIG; - } - if (buflen < sizeof(*attr_hdr) + len) { - dev_err(dev, "WLP: Not enough space in buffer to parse " - "variable data.\n"); - return -EIO; - } - memcpy(value, (void *)attr_hdr + sizeof(*attr_hdr), len); - return sizeof(*attr_hdr) + len; -} - -/** - * Get value of attribute from fixed size attribute field. - * - * @attr: Pointer to attribute field. - * @value: Pointer to variable in which attribute value will be placed. - * @buflen: Size of buffer in which attribute field (including header) - * can be found. - * @returns: Amount of given buffer consumed by parsing for this attribute. - * - * The size and type of the value is known by the type of the attribute. - */ -#define wlp_get(type, type_code, name) \ -ssize_t wlp_get_##name(struct wlp *wlp, struct wlp_attr_##name *attr, \ - type *value, ssize_t buflen) \ -{ \ - return wlp_get_attribute(wlp, (type_code), &attr->hdr, \ - value, sizeof(*value), buflen); \ -} - -#define wlp_get_sparse(type, type_code, name) \ - static wlp_get(type, type_code, name) - -/** - * Get value of attribute from variable sized attribute field. - * - * @max: The maximum size of this attribute. This value is dictated by - * the maximum value from the WLP specification. - * - * @attr: Pointer to attribute field. - * @value: Pointer to variable that will contain the value. The memory - * must already have been allocated for this value. - * @buflen: Size of buffer in which attribute field (including header) - * can be found. - * @returns: Amount of given bufferconsumed by parsing for this attribute. - */ -#define wlp_vget(type_val, type_code, name, max) \ -static ssize_t wlp_get_##name(struct wlp *wlp, \ - struct wlp_attr_##name *attr, \ - type_val *value, ssize_t buflen) \ -{ \ - return wlp_vget_attribute(wlp, (type_code), &attr->hdr, \ - value, (max), buflen); \ -} - -wlp_get(u8, WLP_ATTR_WLP_VER, version) -wlp_get_sparse(enum wlp_wss_sel_mthd, WLP_ATTR_WSS_SEL_MTHD, wss_sel_mthd) -wlp_get_sparse(struct wlp_dev_type, WLP_ATTR_PRI_DEV_TYPE, prim_dev_type) -wlp_get_sparse(enum wlp_assc_error, WLP_ATTR_WLP_ASSC_ERR, wlp_assc_err) -wlp_get_sparse(struct wlp_uuid, WLP_ATTR_UUID_E, uuid_e) -wlp_get_sparse(struct wlp_uuid, WLP_ATTR_UUID_R, uuid_r) -wlp_get(struct wlp_uuid, WLP_ATTR_WSSID, wssid) -wlp_get_sparse(u8, WLP_ATTR_ACC_ENRL, accept_enrl) -wlp_get_sparse(u8, WLP_ATTR_WSS_SEC_STAT, wss_sec_status) -wlp_get_sparse(struct uwb_mac_addr, WLP_ATTR_WSS_BCAST, wss_bcast) -wlp_get_sparse(u8, WLP_ATTR_WSS_TAG, wss_tag) -wlp_get_sparse(struct uwb_mac_addr, WLP_ATTR_WSS_VIRT, wss_virt) -wlp_get_sparse(struct wlp_nonce, WLP_ATTR_ENRL_NONCE, enonce) -wlp_get_sparse(struct wlp_nonce, WLP_ATTR_REG_NONCE, rnonce) - -/* The buffers for the device info attributes can be found in the - * wlp_device_info struct. These buffers contain one byte more than the - * max allowed by the spec - this is done to be able to add the - * terminating \0 for user display. This terminating byte is not required - * in the actual attribute field (because it has a length field) so the - * maximum allowed for this value is one less than its size in the - * structure. - */ -wlp_vget(char, WLP_ATTR_WSS_NAME, wss_name, - FIELD_SIZEOF(struct wlp_wss, name) - 1) -wlp_vget(char, WLP_ATTR_DEV_NAME, dev_name, - FIELD_SIZEOF(struct wlp_device_info, name) - 1) -wlp_vget(char, WLP_ATTR_MANUF, manufacturer, - FIELD_SIZEOF(struct wlp_device_info, manufacturer) - 1) -wlp_vget(char, WLP_ATTR_MODEL_NAME, model_name, - FIELD_SIZEOF(struct wlp_device_info, model_name) - 1) -wlp_vget(char, WLP_ATTR_MODEL_NR, model_nr, - FIELD_SIZEOF(struct wlp_device_info, model_nr) - 1) -wlp_vget(char, WLP_ATTR_SERIAL, serial, - FIELD_SIZEOF(struct wlp_device_info, serial) - 1) - -/** - * Retrieve WSS Name, Accept enroll, Secure status, Broadcast from WSS info - * - * @attr: pointer to WSS name attribute in WSS information attribute field - * @info: structure that will be populated with data from WSS information - * field (WSS name, Accept enroll, secure status, broadcast address) - * @buflen: size of buffer - * - * Although the WSSID attribute forms part of the WSS info attribute it is - * retrieved separately and stored in a different location. - */ -static ssize_t wlp_get_wss_info_attrs(struct wlp *wlp, - struct wlp_attr_hdr *attr, - struct wlp_wss_tmp_info *info, - ssize_t buflen) -{ - struct device *dev = &wlp->rc->uwb_dev.dev; - void *ptr = attr; - size_t used = 0; - ssize_t result = -EINVAL; - - result = wlp_get_wss_name(wlp, ptr, info->name, buflen); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain WSS name from " - "WSS info in D2 message.\n"); - goto error_parse; - } - used += result; - - result = wlp_get_accept_enrl(wlp, ptr + used, &info->accept_enroll, - buflen - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain accepting " - "enrollment from WSS info in D2 message.\n"); - goto error_parse; - } - if (info->accept_enroll != 0 && info->accept_enroll != 1) { - dev_err(dev, "WLP: invalid value for accepting " - "enrollment in D2 message.\n"); - result = -EINVAL; - goto error_parse; - } - used += result; - - result = wlp_get_wss_sec_status(wlp, ptr + used, &info->sec_status, - buflen - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain secure " - "status from WSS info in D2 message.\n"); - goto error_parse; - } - if (info->sec_status != 0 && info->sec_status != 1) { - dev_err(dev, "WLP: invalid value for secure " - "status in D2 message.\n"); - result = -EINVAL; - goto error_parse; - } - used += result; - - result = wlp_get_wss_bcast(wlp, ptr + used, &info->bcast, - buflen - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain broadcast " - "address from WSS info in D2 message.\n"); - goto error_parse; - } - used += result; - result = used; -error_parse: - return result; -} - -/** - * Create a new WSSID entry for the neighbor, allocate temporary storage - * - * Each neighbor can have many WSS active. We maintain a list of WSSIDs - * advertised by neighbor. During discovery we also cache information about - * these WSS in temporary storage. - * - * The temporary storage will be removed after it has been used (eg. - * displayed to user), the wssid element will be removed from the list when - * the neighbor is rediscovered or when it disappears. - */ -static struct wlp_wssid_e *wlp_create_wssid_e(struct wlp *wlp, - struct wlp_neighbor_e *neighbor) -{ - struct device *dev = &wlp->rc->uwb_dev.dev; - struct wlp_wssid_e *wssid_e; - - wssid_e = kzalloc(sizeof(*wssid_e), GFP_KERNEL); - if (wssid_e == NULL) { - dev_err(dev, "WLP: unable to allocate memory " - "for WSS information.\n"); - goto error_alloc; - } - wssid_e->info = kzalloc(sizeof(struct wlp_wss_tmp_info), GFP_KERNEL); - if (wssid_e->info == NULL) { - dev_err(dev, "WLP: unable to allocate memory " - "for temporary WSS information.\n"); - kfree(wssid_e); - wssid_e = NULL; - goto error_alloc; - } - list_add(&wssid_e->node, &neighbor->wssid); -error_alloc: - return wssid_e; -} - -/** - * Parse WSS information attribute - * - * @attr: pointer to WSS information attribute header - * @buflen: size of buffer in which WSS information attribute appears - * @wssid: will place wssid from WSS info attribute in this location - * @wss_info: will place other information from WSS information attribute - * in this location - * - * memory for @wssid and @wss_info must be allocated when calling this - */ -static ssize_t wlp_get_wss_info(struct wlp *wlp, struct wlp_attr_wss_info *attr, - size_t buflen, struct wlp_uuid *wssid, - struct wlp_wss_tmp_info *wss_info) -{ - struct device *dev = &wlp->rc->uwb_dev.dev; - ssize_t result; - size_t len; - size_t used = 0; - void *ptr; - - result = wlp_check_wss_info_attr_hdr(wlp, (struct wlp_attr_hdr *)attr, - buflen); - if (result < 0) - goto out; - len = result; - used = sizeof(*attr); - ptr = attr; - - result = wlp_get_wssid(wlp, ptr + used, wssid, buflen - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain WSSID from WSS info.\n"); - goto out; - } - used += result; - result = wlp_get_wss_info_attrs(wlp, ptr + used, wss_info, - buflen - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain WSS information " - "from WSS information attributes. \n"); - goto out; - } - used += result; - if (len + sizeof(*attr) != used) { - dev_err(dev, "WLP: Amount of data parsed does not " - "match length field. Parsed %zu, length " - "field %zu. \n", used, len); - result = -EINVAL; - goto out; - } - result = used; -out: - return result; -} - -/** - * Retrieve WSS info from association frame - * - * @attr: pointer to WSS information attribute - * @neighbor: ptr to neighbor being discovered, NULL if enrollment in - * progress - * @wss: ptr to WSS being enrolled in, NULL if discovery in progress - * @buflen: size of buffer in which WSS information appears - * - * The WSS information attribute appears in the D2 association message. - * This message is used in two ways: to discover all neighbors or to enroll - * into a WSS activated by a neighbor. During discovery we only want to - * store the WSS info in a cache, to be deleted right after it has been - * used (eg. displayed to the user). During enrollment we store the WSS - * information for the lifetime of enrollment. - * - * During discovery we are interested in all WSS information, during - * enrollment we are only interested in the WSS being enrolled in. Even so, - * when in enrollment we keep parsing the message after finding the WSS of - * interest, this simplifies the calling routine in that it can be sure - * that all WSS information attributes have been parsed out of the message. - * - * Association frame is process with nbmutex held. The list access is safe. - */ -static ssize_t wlp_get_all_wss_info(struct wlp *wlp, - struct wlp_attr_wss_info *attr, - struct wlp_neighbor_e *neighbor, - struct wlp_wss *wss, ssize_t buflen) -{ - struct device *dev = &wlp->rc->uwb_dev.dev; - size_t used = 0; - ssize_t result = -EINVAL; - struct wlp_attr_wss_info *cur; - struct wlp_uuid wssid; - struct wlp_wss_tmp_info wss_info; - unsigned enroll; /* 0 - discovery to cache, 1 - enrollment */ - struct wlp_wssid_e *wssid_e; - char buf[WLP_WSS_UUID_STRSIZE]; - - if (buflen < 0) - goto out; - - if (neighbor != NULL && wss == NULL) - enroll = 0; /* discovery */ - else if (wss != NULL && neighbor == NULL) - enroll = 1; /* enrollment */ - else - goto out; - - cur = attr; - while (buflen - used > 0) { - memset(&wss_info, 0, sizeof(wss_info)); - cur = (void *)cur + used; - result = wlp_get_wss_info(wlp, cur, buflen - used, &wssid, - &wss_info); - if (result == -ENODATA) { - result = used; - goto out; - } else if (result < 0) { - dev_err(dev, "WLP: Unable to parse WSS information " - "from WSS information attribute. \n"); - result = -EINVAL; - goto error_parse; - } - if (enroll && !memcmp(&wssid, &wss->wssid, sizeof(wssid))) { - if (wss_info.accept_enroll != 1) { - dev_err(dev, "WLP: Requested WSS does " - "not accept enrollment.\n"); - result = -EINVAL; - goto out; - } - memcpy(wss->name, wss_info.name, sizeof(wss->name)); - wss->bcast = wss_info.bcast; - wss->secure_status = wss_info.sec_status; - wss->accept_enroll = wss_info.accept_enroll; - wss->state = WLP_WSS_STATE_PART_ENROLLED; - wlp_wss_uuid_print(buf, sizeof(buf), &wssid); - dev_dbg(dev, "WLP: Found WSS %s. Enrolling.\n", buf); - } else { - wssid_e = wlp_create_wssid_e(wlp, neighbor); - if (wssid_e == NULL) { - dev_err(dev, "WLP: Cannot create new WSSID " - "entry for neighbor %02x:%02x.\n", - neighbor->uwb_dev->dev_addr.data[1], - neighbor->uwb_dev->dev_addr.data[0]); - result = -ENOMEM; - goto out; - } - wssid_e->wssid = wssid; - *wssid_e->info = wss_info; - } - used += result; - } - result = used; -error_parse: - if (result < 0 && !enroll) /* this was a discovery */ - wlp_remove_neighbor_tmp_info(neighbor); -out: - return result; - -} - -/** - * Parse WSS information attributes into cache for discovery - * - * @attr: the first WSS information attribute in message - * @neighbor: the neighbor whose cache will be populated - * @buflen: size of the input buffer - */ -static ssize_t wlp_get_wss_info_to_cache(struct wlp *wlp, - struct wlp_attr_wss_info *attr, - struct wlp_neighbor_e *neighbor, - ssize_t buflen) -{ - return wlp_get_all_wss_info(wlp, attr, neighbor, NULL, buflen); -} - -/** - * Parse WSS information attributes into WSS struct for enrollment - * - * @attr: the first WSS information attribute in message - * @wss: the WSS that will be enrolled - * @buflen: size of the input buffer - */ -static ssize_t wlp_get_wss_info_to_enroll(struct wlp *wlp, - struct wlp_attr_wss_info *attr, - struct wlp_wss *wss, ssize_t buflen) -{ - return wlp_get_all_wss_info(wlp, attr, NULL, wss, buflen); -} - -/** - * Construct a D1 association frame - * - * We use the radio control functions to determine the values of the device - * properties. These are of variable length and the total space needed is - * tallied first before we start constructing the message. The radio - * control functions return strings that are terminated with \0. This - * character should not be included in the message (there is a length field - * accompanying it in the attribute). - */ -static int wlp_build_assoc_d1(struct wlp *wlp, struct wlp_wss *wss, - struct sk_buff **skb) -{ - - struct device *dev = &wlp->rc->uwb_dev.dev; - int result = 0; - struct wlp_device_info *info; - size_t used = 0; - struct wlp_frame_assoc *_d1; - struct sk_buff *_skb; - void *d1_itr; - - if (wlp->dev_info == NULL) { - result = __wlp_setup_device_info(wlp); - if (result < 0) { - dev_err(dev, "WLP: Unable to setup device " - "information for D1 message.\n"); - goto error; - } - } - info = wlp->dev_info; - _skb = dev_alloc_skb(sizeof(*_d1) - + sizeof(struct wlp_attr_uuid_e) - + sizeof(struct wlp_attr_wss_sel_mthd) - + sizeof(struct wlp_attr_dev_name) - + strlen(info->name) - + sizeof(struct wlp_attr_manufacturer) - + strlen(info->manufacturer) - + sizeof(struct wlp_attr_model_name) - + strlen(info->model_name) - + sizeof(struct wlp_attr_model_nr) - + strlen(info->model_nr) - + sizeof(struct wlp_attr_serial) - + strlen(info->serial) - + sizeof(struct wlp_attr_prim_dev_type) - + sizeof(struct wlp_attr_wlp_assc_err)); - if (_skb == NULL) { - dev_err(dev, "WLP: Cannot allocate memory for association " - "message.\n"); - result = -ENOMEM; - goto error; - } - _d1 = (void *) _skb->data; - _d1->hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID); - _d1->hdr.type = WLP_FRAME_ASSOCIATION; - _d1->type = WLP_ASSOC_D1; - - wlp_set_version(&_d1->version, WLP_VERSION); - wlp_set_msg_type(&_d1->msg_type, WLP_ASSOC_D1); - d1_itr = _d1->attr; - used = wlp_set_uuid_e(d1_itr, &wlp->uuid); - used += wlp_set_wss_sel_mthd(d1_itr + used, WLP_WSS_REG_SELECT); - used += wlp_set_dev_name(d1_itr + used, info->name, - strlen(info->name)); - used += wlp_set_manufacturer(d1_itr + used, info->manufacturer, - strlen(info->manufacturer)); - used += wlp_set_model_name(d1_itr + used, info->model_name, - strlen(info->model_name)); - used += wlp_set_model_nr(d1_itr + used, info->model_nr, - strlen(info->model_nr)); - used += wlp_set_serial(d1_itr + used, info->serial, - strlen(info->serial)); - used += wlp_set_prim_dev_type(d1_itr + used, &info->prim_dev_type); - used += wlp_set_wlp_assc_err(d1_itr + used, WLP_ASSOC_ERROR_NONE); - skb_put(_skb, sizeof(*_d1) + used); - *skb = _skb; -error: - return result; -} - -/** - * Construct a D2 association frame - * - * We use the radio control functions to determine the values of the device - * properties. These are of variable length and the total space needed is - * tallied first before we start constructing the message. The radio - * control functions return strings that are terminated with \0. This - * character should not be included in the message (there is a length field - * accompanying it in the attribute). - */ -static -int wlp_build_assoc_d2(struct wlp *wlp, struct wlp_wss *wss, - struct sk_buff **skb, struct wlp_uuid *uuid_e) -{ - - struct device *dev = &wlp->rc->uwb_dev.dev; - int result = 0; - struct wlp_device_info *info; - size_t used = 0; - struct wlp_frame_assoc *_d2; - struct sk_buff *_skb; - void *d2_itr; - size_t mem_needed; - - if (wlp->dev_info == NULL) { - result = __wlp_setup_device_info(wlp); - if (result < 0) { - dev_err(dev, "WLP: Unable to setup device " - "information for D2 message.\n"); - goto error; - } - } - info = wlp->dev_info; - mem_needed = sizeof(*_d2) - + sizeof(struct wlp_attr_uuid_e) - + sizeof(struct wlp_attr_uuid_r) - + sizeof(struct wlp_attr_dev_name) - + strlen(info->name) - + sizeof(struct wlp_attr_manufacturer) - + strlen(info->manufacturer) - + sizeof(struct wlp_attr_model_name) - + strlen(info->model_name) - + sizeof(struct wlp_attr_model_nr) - + strlen(info->model_nr) - + sizeof(struct wlp_attr_serial) - + strlen(info->serial) - + sizeof(struct wlp_attr_prim_dev_type) - + sizeof(struct wlp_attr_wlp_assc_err); - if (wlp->wss.state >= WLP_WSS_STATE_ACTIVE) - mem_needed += sizeof(struct wlp_attr_wss_info) - + sizeof(struct wlp_wss_info) - + strlen(wlp->wss.name); - _skb = dev_alloc_skb(mem_needed); - if (_skb == NULL) { - dev_err(dev, "WLP: Cannot allocate memory for association " - "message.\n"); - result = -ENOMEM; - goto error; - } - _d2 = (void *) _skb->data; - _d2->hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID); - _d2->hdr.type = WLP_FRAME_ASSOCIATION; - _d2->type = WLP_ASSOC_D2; - - wlp_set_version(&_d2->version, WLP_VERSION); - wlp_set_msg_type(&_d2->msg_type, WLP_ASSOC_D2); - d2_itr = _d2->attr; - used = wlp_set_uuid_e(d2_itr, uuid_e); - used += wlp_set_uuid_r(d2_itr + used, &wlp->uuid); - if (wlp->wss.state >= WLP_WSS_STATE_ACTIVE) - used += wlp_set_wss_info(d2_itr + used, &wlp->wss); - used += wlp_set_dev_name(d2_itr + used, info->name, - strlen(info->name)); - used += wlp_set_manufacturer(d2_itr + used, info->manufacturer, - strlen(info->manufacturer)); - used += wlp_set_model_name(d2_itr + used, info->model_name, - strlen(info->model_name)); - used += wlp_set_model_nr(d2_itr + used, info->model_nr, - strlen(info->model_nr)); - used += wlp_set_serial(d2_itr + used, info->serial, - strlen(info->serial)); - used += wlp_set_prim_dev_type(d2_itr + used, &info->prim_dev_type); - used += wlp_set_wlp_assc_err(d2_itr + used, WLP_ASSOC_ERROR_NONE); - skb_put(_skb, sizeof(*_d2) + used); - *skb = _skb; -error: - return result; -} - -/** - * Allocate memory for and populate fields of F0 association frame - * - * Currently (while focusing on unsecure enrollment) we ignore the - * nonce's that could be placed in the message. Only the error field is - * populated by the value provided by the caller. - */ -static -int wlp_build_assoc_f0(struct wlp *wlp, struct sk_buff **skb, - enum wlp_assc_error error) -{ - struct device *dev = &wlp->rc->uwb_dev.dev; - int result = -ENOMEM; - struct { - struct wlp_frame_assoc f0_hdr; - struct wlp_attr_enonce enonce; - struct wlp_attr_rnonce rnonce; - struct wlp_attr_wlp_assc_err assc_err; - } *f0; - struct sk_buff *_skb; - struct wlp_nonce tmp; - - _skb = dev_alloc_skb(sizeof(*f0)); - if (_skb == NULL) { - dev_err(dev, "WLP: Unable to allocate memory for F0 " - "association frame. \n"); - goto error_alloc; - } - f0 = (void *) _skb->data; - f0->f0_hdr.hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID); - f0->f0_hdr.hdr.type = WLP_FRAME_ASSOCIATION; - f0->f0_hdr.type = WLP_ASSOC_F0; - wlp_set_version(&f0->f0_hdr.version, WLP_VERSION); - wlp_set_msg_type(&f0->f0_hdr.msg_type, WLP_ASSOC_F0); - memset(&tmp, 0, sizeof(tmp)); - wlp_set_enonce(&f0->enonce, &tmp); - wlp_set_rnonce(&f0->rnonce, &tmp); - wlp_set_wlp_assc_err(&f0->assc_err, error); - skb_put(_skb, sizeof(*f0)); - *skb = _skb; - result = 0; -error_alloc: - return result; -} - -/** - * Parse F0 frame - * - * We just retrieve the values and print it as an error to the user. - * Calling function already knows an error occured (F0 indicates error), so - * we just parse the content as debug for higher layers. - */ -int wlp_parse_f0(struct wlp *wlp, struct sk_buff *skb) -{ - struct device *dev = &wlp->rc->uwb_dev.dev; - struct wlp_frame_assoc *f0 = (void *) skb->data; - void *ptr = skb->data; - size_t len = skb->len; - size_t used; - ssize_t result; - struct wlp_nonce enonce, rnonce; - enum wlp_assc_error assc_err; - char enonce_buf[WLP_WSS_NONCE_STRSIZE]; - char rnonce_buf[WLP_WSS_NONCE_STRSIZE]; - - used = sizeof(*f0); - result = wlp_get_enonce(wlp, ptr + used, &enonce, len - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain Enrollee nonce " - "attribute from F0 message.\n"); - goto error_parse; - } - used += result; - result = wlp_get_rnonce(wlp, ptr + used, &rnonce, len - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain Registrar nonce " - "attribute from F0 message.\n"); - goto error_parse; - } - used += result; - result = wlp_get_wlp_assc_err(wlp, ptr + used, &assc_err, len - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain WLP Association error " - "attribute from F0 message.\n"); - goto error_parse; - } - wlp_wss_nonce_print(enonce_buf, sizeof(enonce_buf), &enonce); - wlp_wss_nonce_print(rnonce_buf, sizeof(rnonce_buf), &rnonce); - dev_err(dev, "WLP: Received F0 error frame from neighbor. Enrollee " - "nonce: %s, Registrar nonce: %s, WLP Association error: %s.\n", - enonce_buf, rnonce_buf, wlp_assc_error_str(assc_err)); - result = 0; -error_parse: - return result; -} - -/** - * Retrieve variable device information from association message - * - * The device information parsed is not required in any message. This - * routine will thus not fail if an attribute is not present. - * The attributes are expected in a certain order, even if all are not - * present. The "attribute type" value is used to ensure the attributes - * are parsed in the correct order. - * - * If an error is encountered during parsing the function will return an - * error code, when this happens the given device_info structure may be - * partially filled. - */ -static -int wlp_get_variable_info(struct wlp *wlp, void *data, - struct wlp_device_info *dev_info, ssize_t len) -{ - struct device *dev = &wlp->rc->uwb_dev.dev; - size_t used = 0; - struct wlp_attr_hdr *hdr; - ssize_t result = 0; - unsigned last = 0; - - while (len - used > 0) { - if (len - used < sizeof(*hdr)) { - dev_err(dev, "WLP: Partial data in frame, cannot " - "parse. \n"); - goto error_parse; - } - hdr = data + used; - switch (le16_to_cpu(hdr->type)) { - case WLP_ATTR_MANUF: - if (last >= WLP_ATTR_MANUF) { - dev_err(dev, "WLP: Incorrect order of " - "attribute values in D1 msg.\n"); - goto error_parse; - } - result = wlp_get_manufacturer(wlp, data + used, - dev_info->manufacturer, - len - used); - if (result < 0) { - dev_err(dev, "WLP: Unable to obtain " - "Manufacturer attribute from D1 " - "message.\n"); - goto error_parse; - } - last = WLP_ATTR_MANUF; - used += result; - break; - case WLP_ATTR_MODEL_NAME: - if (last >= WLP_ATTR_MODEL_NAME) { - dev_err(dev, "WLP: Incorrect order of " - "attribute values in D1 msg.\n"); - goto error_parse; - } - result = wlp_get_model_name(wlp, data + used, - dev_info->model_name, - len - used); - if (result < 0) { - dev_err(dev, "WLP: Unable to obtain Model " - "name attribute from D1 message.\n"); - goto error_parse; - } - last = WLP_ATTR_MODEL_NAME; - used += result; - break; - case WLP_ATTR_MODEL_NR: - if (last >= WLP_ATTR_MODEL_NR) { - dev_err(dev, "WLP: Incorrect order of " - "attribute values in D1 msg.\n"); - goto error_parse; - } - result = wlp_get_model_nr(wlp, data + used, - dev_info->model_nr, - len - used); - if (result < 0) { - dev_err(dev, "WLP: Unable to obtain Model " - "number attribute from D1 message.\n"); - goto error_parse; - } - last = WLP_ATTR_MODEL_NR; - used += result; - break; - case WLP_ATTR_SERIAL: - if (last >= WLP_ATTR_SERIAL) { - dev_err(dev, "WLP: Incorrect order of " - "attribute values in D1 msg.\n"); - goto error_parse; - } - result = wlp_get_serial(wlp, data + used, - dev_info->serial, len - used); - if (result < 0) { - dev_err(dev, "WLP: Unable to obtain Serial " - "number attribute from D1 message.\n"); - goto error_parse; - } - last = WLP_ATTR_SERIAL; - used += result; - break; - case WLP_ATTR_PRI_DEV_TYPE: - if (last >= WLP_ATTR_PRI_DEV_TYPE) { - dev_err(dev, "WLP: Incorrect order of " - "attribute values in D1 msg.\n"); - goto error_parse; - } - result = wlp_get_prim_dev_type(wlp, data + used, - &dev_info->prim_dev_type, - len - used); - if (result < 0) { - dev_err(dev, "WLP: Unable to obtain Primary " - "device type attribute from D1 " - "message.\n"); - goto error_parse; - } - dev_info->prim_dev_type.category = - le16_to_cpu(dev_info->prim_dev_type.category); - dev_info->prim_dev_type.subID = - le16_to_cpu(dev_info->prim_dev_type.subID); - last = WLP_ATTR_PRI_DEV_TYPE; - used += result; - break; - default: - /* This is not variable device information. */ - goto out; - break; - } - } -out: - return used; -error_parse: - return -EINVAL; -} - -/** - * Parse incoming D1 frame, populate attribute values - * - * Caller provides pointers to memory already allocated for attributes - * expected in the D1 frame. These variables will be populated. - */ -static -int wlp_parse_d1_frame(struct wlp *wlp, struct sk_buff *skb, - struct wlp_uuid *uuid_e, - enum wlp_wss_sel_mthd *sel_mthd, - struct wlp_device_info *dev_info, - enum wlp_assc_error *assc_err) -{ - struct device *dev = &wlp->rc->uwb_dev.dev; - struct wlp_frame_assoc *d1 = (void *) skb->data; - void *ptr = skb->data; - size_t len = skb->len; - size_t used; - ssize_t result; - - used = sizeof(*d1); - result = wlp_get_uuid_e(wlp, ptr + used, uuid_e, len - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain UUID-E attribute from D1 " - "message.\n"); - goto error_parse; - } - used += result; - result = wlp_get_wss_sel_mthd(wlp, ptr + used, sel_mthd, len - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain WSS selection method " - "from D1 message.\n"); - goto error_parse; - } - used += result; - result = wlp_get_dev_name(wlp, ptr + used, dev_info->name, - len - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain Device Name from D1 " - "message.\n"); - goto error_parse; - } - used += result; - result = wlp_get_variable_info(wlp, ptr + used, dev_info, len - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain Device Information from " - "D1 message.\n"); - goto error_parse; - } - used += result; - result = wlp_get_wlp_assc_err(wlp, ptr + used, assc_err, len - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain WLP Association Error " - "Information from D1 message.\n"); - goto error_parse; - } - result = 0; -error_parse: - return result; -} -/** - * Handle incoming D1 frame - * - * The frame has already been verified to contain an Association header with - * the correct version number. Parse the incoming frame, construct and send - * a D2 frame in response. - * - * It is not clear what to do with most fields in the incoming D1 frame. We - * retrieve and discard the information here for now. - */ -void wlp_handle_d1_frame(struct work_struct *ws) -{ - struct wlp_assoc_frame_ctx *frame_ctx = container_of(ws, - struct wlp_assoc_frame_ctx, - ws); - struct wlp *wlp = frame_ctx->wlp; - struct wlp_wss *wss = &wlp->wss; - struct sk_buff *skb = frame_ctx->skb; - struct uwb_dev_addr *src = &frame_ctx->src; - int result; - struct device *dev = &wlp->rc->uwb_dev.dev; - struct wlp_uuid uuid_e; - enum wlp_wss_sel_mthd sel_mthd = 0; - struct wlp_device_info dev_info; - enum wlp_assc_error assc_err; - struct sk_buff *resp = NULL; - - /* Parse D1 frame */ - mutex_lock(&wss->mutex); - mutex_lock(&wlp->mutex); /* to access wlp->uuid */ - memset(&dev_info, 0, sizeof(dev_info)); - result = wlp_parse_d1_frame(wlp, skb, &uuid_e, &sel_mthd, &dev_info, - &assc_err); - if (result < 0) { - dev_err(dev, "WLP: Unable to parse incoming D1 frame.\n"); - kfree_skb(skb); - goto out; - } - - kfree_skb(skb); - if (!wlp_uuid_is_set(&wlp->uuid)) { - dev_err(dev, "WLP: UUID is not set. Set via sysfs to " - "proceed. Respong to D1 message with error F0.\n"); - result = wlp_build_assoc_f0(wlp, &resp, - WLP_ASSOC_ERROR_NOT_READY); - if (result < 0) { - dev_err(dev, "WLP: Unable to construct F0 message.\n"); - goto out; - } - } else { - /* Construct D2 frame */ - result = wlp_build_assoc_d2(wlp, wss, &resp, &uuid_e); - if (result < 0) { - dev_err(dev, "WLP: Unable to construct D2 message.\n"); - goto out; - } - } - /* Send D2 frame */ - BUG_ON(wlp->xmit_frame == NULL); - result = wlp->xmit_frame(wlp, resp, src); - if (result < 0) { - dev_err(dev, "WLP: Unable to transmit D2 association " - "message: %d\n", result); - if (result == -ENXIO) - dev_err(dev, "WLP: Is network interface up? \n"); - /* We could try again ... */ - dev_kfree_skb_any(resp); /* we need to free if tx fails */ - } -out: - kfree(frame_ctx); - mutex_unlock(&wlp->mutex); - mutex_unlock(&wss->mutex); -} - -/** - * Parse incoming D2 frame, create and populate temporary cache - * - * @skb: socket buffer in which D2 frame can be found - * @neighbor: the neighbor that sent the D2 frame - * - * Will allocate memory for temporary storage of information learned during - * discovery. - */ -int wlp_parse_d2_frame_to_cache(struct wlp *wlp, struct sk_buff *skb, - struct wlp_neighbor_e *neighbor) -{ - struct device *dev = &wlp->rc->uwb_dev.dev; - struct wlp_frame_assoc *d2 = (void *) skb->data; - void *ptr = skb->data; - size_t len = skb->len; - size_t used; - ssize_t result; - struct wlp_uuid uuid_e; - struct wlp_device_info *nb_info; - enum wlp_assc_error assc_err; - - used = sizeof(*d2); - result = wlp_get_uuid_e(wlp, ptr + used, &uuid_e, len - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain UUID-E attribute from D2 " - "message.\n"); - goto error_parse; - } - if (memcmp(&uuid_e, &wlp->uuid, sizeof(uuid_e))) { - dev_err(dev, "WLP: UUID-E in incoming D2 does not match " - "local UUID sent in D1. \n"); - goto error_parse; - } - used += result; - result = wlp_get_uuid_r(wlp, ptr + used, &neighbor->uuid, len - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain UUID-R attribute from D2 " - "message.\n"); - goto error_parse; - } - used += result; - result = wlp_get_wss_info_to_cache(wlp, ptr + used, neighbor, - len - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain WSS information " - "from D2 message.\n"); - goto error_parse; - } - used += result; - neighbor->info = kzalloc(sizeof(struct wlp_device_info), GFP_KERNEL); - if (neighbor->info == NULL) { - dev_err(dev, "WLP: cannot allocate memory to store device " - "info.\n"); - result = -ENOMEM; - goto error_parse; - } - nb_info = neighbor->info; - result = wlp_get_dev_name(wlp, ptr + used, nb_info->name, - len - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain Device Name from D2 " - "message.\n"); - goto error_parse; - } - used += result; - result = wlp_get_variable_info(wlp, ptr + used, nb_info, len - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain Device Information from " - "D2 message.\n"); - goto error_parse; - } - used += result; - result = wlp_get_wlp_assc_err(wlp, ptr + used, &assc_err, len - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain WLP Association Error " - "Information from D2 message.\n"); - goto error_parse; - } - if (assc_err != WLP_ASSOC_ERROR_NONE) { - dev_err(dev, "WLP: neighbor device returned association " - "error %d\n", assc_err); - result = -EINVAL; - goto error_parse; - } - result = 0; -error_parse: - if (result < 0) - wlp_remove_neighbor_tmp_info(neighbor); - return result; -} - -/** - * Parse incoming D2 frame, populate attribute values of WSS bein enrolled in - * - * @wss: our WSS that will be enrolled - * @skb: socket buffer in which D2 frame can be found - * @neighbor: the neighbor that sent the D2 frame - * @wssid: the wssid of the WSS in which we want to enroll - * - * Forms part of enrollment sequence. We are trying to enroll in WSS with - * @wssid by using @neighbor as registrar. A D1 message was sent to - * @neighbor and now we need to parse the D2 response. The neighbor's - * response is searched for the requested WSS and if found (and it accepts - * enrollment), we store the information. - */ -int wlp_parse_d2_frame_to_enroll(struct wlp_wss *wss, struct sk_buff *skb, - struct wlp_neighbor_e *neighbor, - struct wlp_uuid *wssid) -{ - struct wlp *wlp = container_of(wss, struct wlp, wss); - struct device *dev = &wlp->rc->uwb_dev.dev; - void *ptr = skb->data; - size_t len = skb->len; - size_t used; - ssize_t result; - struct wlp_uuid uuid_e; - struct wlp_uuid uuid_r; - struct wlp_device_info nb_info; - enum wlp_assc_error assc_err; - char uuid_bufA[WLP_WSS_UUID_STRSIZE]; - char uuid_bufB[WLP_WSS_UUID_STRSIZE]; - - used = sizeof(struct wlp_frame_assoc); - result = wlp_get_uuid_e(wlp, ptr + used, &uuid_e, len - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain UUID-E attribute from D2 " - "message.\n"); - goto error_parse; - } - if (memcmp(&uuid_e, &wlp->uuid, sizeof(uuid_e))) { - dev_err(dev, "WLP: UUID-E in incoming D2 does not match " - "local UUID sent in D1. \n"); - goto error_parse; - } - used += result; - result = wlp_get_uuid_r(wlp, ptr + used, &uuid_r, len - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain UUID-R attribute from D2 " - "message.\n"); - goto error_parse; - } - if (memcmp(&uuid_r, &neighbor->uuid, sizeof(uuid_r))) { - wlp_wss_uuid_print(uuid_bufA, sizeof(uuid_bufA), - &neighbor->uuid); - wlp_wss_uuid_print(uuid_bufB, sizeof(uuid_bufB), &uuid_r); - dev_err(dev, "WLP: UUID of neighbor does not match UUID " - "learned during discovery. Originally discovered: %s, " - "now from D2 message: %s\n", uuid_bufA, uuid_bufB); - result = -EINVAL; - goto error_parse; - } - used += result; - wss->wssid = *wssid; - result = wlp_get_wss_info_to_enroll(wlp, ptr + used, wss, len - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain WSS information " - "from D2 message.\n"); - goto error_parse; - } - if (wss->state != WLP_WSS_STATE_PART_ENROLLED) { - dev_err(dev, "WLP: D2 message did not contain information " - "for successful enrollment. \n"); - result = -EINVAL; - goto error_parse; - } - used += result; - /* Place device information on stack to continue parsing of message */ - result = wlp_get_dev_name(wlp, ptr + used, nb_info.name, - len - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain Device Name from D2 " - "message.\n"); - goto error_parse; - } - used += result; - result = wlp_get_variable_info(wlp, ptr + used, &nb_info, len - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain Device Information from " - "D2 message.\n"); - goto error_parse; - } - used += result; - result = wlp_get_wlp_assc_err(wlp, ptr + used, &assc_err, len - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain WLP Association Error " - "Information from D2 message.\n"); - goto error_parse; - } - if (assc_err != WLP_ASSOC_ERROR_NONE) { - dev_err(dev, "WLP: neighbor device returned association " - "error %d\n", assc_err); - if (wss->state == WLP_WSS_STATE_PART_ENROLLED) { - dev_err(dev, "WLP: Enrolled in WSS (should not " - "happen according to spec). Undoing. \n"); - wlp_wss_reset(wss); - } - result = -EINVAL; - goto error_parse; - } - result = 0; -error_parse: - return result; -} - -/** - * Parse C3/C4 frame into provided variables - * - * @wssid: will point to copy of wssid retrieved from C3/C4 frame - * @tag: will point to copy of tag retrieved from C3/C4 frame - * @virt_addr: will point to copy of virtual address retrieved from C3/C4 - * frame. - * - * Calling function has to allocate memory for these values. - * - * skb contains a valid C3/C4 frame, return the individual fields of this - * frame in the provided variables. - */ -int wlp_parse_c3c4_frame(struct wlp *wlp, struct sk_buff *skb, - struct wlp_uuid *wssid, u8 *tag, - struct uwb_mac_addr *virt_addr) -{ - struct device *dev = &wlp->rc->uwb_dev.dev; - int result; - void *ptr = skb->data; - size_t len = skb->len; - size_t used; - struct wlp_frame_assoc *assoc = ptr; - - used = sizeof(*assoc); - result = wlp_get_wssid(wlp, ptr + used, wssid, len - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain WSSID attribute from " - "%s message.\n", wlp_assoc_frame_str(assoc->type)); - goto error_parse; - } - used += result; - result = wlp_get_wss_tag(wlp, ptr + used, tag, len - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain WSS tag attribute from " - "%s message.\n", wlp_assoc_frame_str(assoc->type)); - goto error_parse; - } - used += result; - result = wlp_get_wss_virt(wlp, ptr + used, virt_addr, len - used); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain WSS virtual address " - "attribute from %s message.\n", - wlp_assoc_frame_str(assoc->type)); - goto error_parse; - } -error_parse: - return result; -} - -/** - * Allocate memory for and populate fields of C1 or C2 association frame - * - * The C1 and C2 association frames appear identical - except for the type. - */ -static -int wlp_build_assoc_c1c2(struct wlp *wlp, struct wlp_wss *wss, - struct sk_buff **skb, enum wlp_assoc_type type) -{ - struct device *dev = &wlp->rc->uwb_dev.dev; - int result = -ENOMEM; - struct { - struct wlp_frame_assoc c_hdr; - struct wlp_attr_wssid wssid; - } *c; - struct sk_buff *_skb; - - _skb = dev_alloc_skb(sizeof(*c)); - if (_skb == NULL) { - dev_err(dev, "WLP: Unable to allocate memory for C1/C2 " - "association frame. \n"); - goto error_alloc; - } - c = (void *) _skb->data; - c->c_hdr.hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID); - c->c_hdr.hdr.type = WLP_FRAME_ASSOCIATION; - c->c_hdr.type = type; - wlp_set_version(&c->c_hdr.version, WLP_VERSION); - wlp_set_msg_type(&c->c_hdr.msg_type, type); - wlp_set_wssid(&c->wssid, &wss->wssid); - skb_put(_skb, sizeof(*c)); - *skb = _skb; - result = 0; -error_alloc: - return result; -} - - -static -int wlp_build_assoc_c1(struct wlp *wlp, struct wlp_wss *wss, - struct sk_buff **skb) -{ - return wlp_build_assoc_c1c2(wlp, wss, skb, WLP_ASSOC_C1); -} - -static -int wlp_build_assoc_c2(struct wlp *wlp, struct wlp_wss *wss, - struct sk_buff **skb) -{ - return wlp_build_assoc_c1c2(wlp, wss, skb, WLP_ASSOC_C2); -} - - -/** - * Allocate memory for and populate fields of C3 or C4 association frame - * - * The C3 and C4 association frames appear identical - except for the type. - */ -static -int wlp_build_assoc_c3c4(struct wlp *wlp, struct wlp_wss *wss, - struct sk_buff **skb, enum wlp_assoc_type type) -{ - struct device *dev = &wlp->rc->uwb_dev.dev; - int result = -ENOMEM; - struct { - struct wlp_frame_assoc c_hdr; - struct wlp_attr_wssid wssid; - struct wlp_attr_wss_tag wss_tag; - struct wlp_attr_wss_virt wss_virt; - } *c; - struct sk_buff *_skb; - - _skb = dev_alloc_skb(sizeof(*c)); - if (_skb == NULL) { - dev_err(dev, "WLP: Unable to allocate memory for C3/C4 " - "association frame. \n"); - goto error_alloc; - } - c = (void *) _skb->data; - c->c_hdr.hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID); - c->c_hdr.hdr.type = WLP_FRAME_ASSOCIATION; - c->c_hdr.type = type; - wlp_set_version(&c->c_hdr.version, WLP_VERSION); - wlp_set_msg_type(&c->c_hdr.msg_type, type); - wlp_set_wssid(&c->wssid, &wss->wssid); - wlp_set_wss_tag(&c->wss_tag, wss->tag); - wlp_set_wss_virt(&c->wss_virt, &wss->virtual_addr); - skb_put(_skb, sizeof(*c)); - *skb = _skb; - result = 0; -error_alloc: - return result; -} - -static -int wlp_build_assoc_c3(struct wlp *wlp, struct wlp_wss *wss, - struct sk_buff **skb) -{ - return wlp_build_assoc_c3c4(wlp, wss, skb, WLP_ASSOC_C3); -} - -static -int wlp_build_assoc_c4(struct wlp *wlp, struct wlp_wss *wss, - struct sk_buff **skb) -{ - return wlp_build_assoc_c3c4(wlp, wss, skb, WLP_ASSOC_C4); -} - - -#define wlp_send_assoc(type, id) \ -static int wlp_send_assoc_##type(struct wlp *wlp, struct wlp_wss *wss, \ - struct uwb_dev_addr *dev_addr) \ -{ \ - struct device *dev = &wlp->rc->uwb_dev.dev; \ - int result; \ - struct sk_buff *skb = NULL; \ - \ - /* Build the frame */ \ - result = wlp_build_assoc_##type(wlp, wss, &skb); \ - if (result < 0) { \ - dev_err(dev, "WLP: Unable to construct %s association " \ - "frame: %d\n", wlp_assoc_frame_str(id), result);\ - goto error_build_assoc; \ - } \ - /* Send the frame */ \ - BUG_ON(wlp->xmit_frame == NULL); \ - result = wlp->xmit_frame(wlp, skb, dev_addr); \ - if (result < 0) { \ - dev_err(dev, "WLP: Unable to transmit %s association " \ - "message: %d\n", wlp_assoc_frame_str(id), \ - result); \ - if (result == -ENXIO) \ - dev_err(dev, "WLP: Is network interface " \ - "up? \n"); \ - goto error_xmit; \ - } \ - return 0; \ -error_xmit: \ - /* We could try again ... */ \ - dev_kfree_skb_any(skb);/*we need to free if tx fails*/ \ -error_build_assoc: \ - return result; \ -} - -wlp_send_assoc(d1, WLP_ASSOC_D1) -wlp_send_assoc(c1, WLP_ASSOC_C1) -wlp_send_assoc(c3, WLP_ASSOC_C3) - -int wlp_send_assoc_frame(struct wlp *wlp, struct wlp_wss *wss, - struct uwb_dev_addr *dev_addr, - enum wlp_assoc_type type) -{ - int result = 0; - struct device *dev = &wlp->rc->uwb_dev.dev; - switch (type) { - case WLP_ASSOC_D1: - result = wlp_send_assoc_d1(wlp, wss, dev_addr); - break; - case WLP_ASSOC_C1: - result = wlp_send_assoc_c1(wlp, wss, dev_addr); - break; - case WLP_ASSOC_C3: - result = wlp_send_assoc_c3(wlp, wss, dev_addr); - break; - default: - dev_err(dev, "WLP: Received request to send unknown " - "association message.\n"); - result = -EINVAL; - break; - } - return result; -} - -/** - * Handle incoming C1 frame - * - * The frame has already been verified to contain an Association header with - * the correct version number. Parse the incoming frame, construct and send - * a C2 frame in response. - */ -void wlp_handle_c1_frame(struct work_struct *ws) -{ - struct wlp_assoc_frame_ctx *frame_ctx = container_of(ws, - struct wlp_assoc_frame_ctx, - ws); - struct wlp *wlp = frame_ctx->wlp; - struct wlp_wss *wss = &wlp->wss; - struct device *dev = &wlp->rc->uwb_dev.dev; - struct wlp_frame_assoc *c1 = (void *) frame_ctx->skb->data; - unsigned int len = frame_ctx->skb->len; - struct uwb_dev_addr *src = &frame_ctx->src; - int result; - struct wlp_uuid wssid; - struct sk_buff *resp = NULL; - - /* Parse C1 frame */ - mutex_lock(&wss->mutex); - result = wlp_get_wssid(wlp, (void *)c1 + sizeof(*c1), &wssid, - len - sizeof(*c1)); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain WSSID from C1 frame.\n"); - goto out; - } - if (!memcmp(&wssid, &wss->wssid, sizeof(wssid)) - && wss->state == WLP_WSS_STATE_ACTIVE) { - /* Construct C2 frame */ - result = wlp_build_assoc_c2(wlp, wss, &resp); - if (result < 0) { - dev_err(dev, "WLP: Unable to construct C2 message.\n"); - goto out; - } - } else { - /* Construct F0 frame */ - result = wlp_build_assoc_f0(wlp, &resp, WLP_ASSOC_ERROR_INV); - if (result < 0) { - dev_err(dev, "WLP: Unable to construct F0 message.\n"); - goto out; - } - } - /* Send C2 frame */ - BUG_ON(wlp->xmit_frame == NULL); - result = wlp->xmit_frame(wlp, resp, src); - if (result < 0) { - dev_err(dev, "WLP: Unable to transmit response association " - "message: %d\n", result); - if (result == -ENXIO) - dev_err(dev, "WLP: Is network interface up? \n"); - /* We could try again ... */ - dev_kfree_skb_any(resp); /* we need to free if tx fails */ - } -out: - kfree_skb(frame_ctx->skb); - kfree(frame_ctx); - mutex_unlock(&wss->mutex); -} - -/** - * Handle incoming C3 frame - * - * The frame has already been verified to contain an Association header with - * the correct version number. Parse the incoming frame, construct and send - * a C4 frame in response. If the C3 frame identifies a WSS that is locally - * active then we connect to this neighbor (add it to our EDA cache). - */ -void wlp_handle_c3_frame(struct work_struct *ws) -{ - struct wlp_assoc_frame_ctx *frame_ctx = container_of(ws, - struct wlp_assoc_frame_ctx, - ws); - struct wlp *wlp = frame_ctx->wlp; - struct wlp_wss *wss = &wlp->wss; - struct device *dev = &wlp->rc->uwb_dev.dev; - struct sk_buff *skb = frame_ctx->skb; - struct uwb_dev_addr *src = &frame_ctx->src; - int result; - struct sk_buff *resp = NULL; - struct wlp_uuid wssid; - u8 tag; - struct uwb_mac_addr virt_addr; - - /* Parse C3 frame */ - mutex_lock(&wss->mutex); - result = wlp_parse_c3c4_frame(wlp, skb, &wssid, &tag, &virt_addr); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain values from C3 frame.\n"); - goto out; - } - if (!memcmp(&wssid, &wss->wssid, sizeof(wssid)) - && wss->state >= WLP_WSS_STATE_ACTIVE) { - result = wlp_eda_update_node(&wlp->eda, src, wss, - (void *) virt_addr.data, tag, - WLP_WSS_CONNECTED); - if (result < 0) { - dev_err(dev, "WLP: Unable to update EDA cache " - "with new connected neighbor information.\n"); - result = wlp_build_assoc_f0(wlp, &resp, - WLP_ASSOC_ERROR_INT); - if (result < 0) { - dev_err(dev, "WLP: Unable to construct F0 " - "message.\n"); - goto out; - } - } else { - wss->state = WLP_WSS_STATE_CONNECTED; - /* Construct C4 frame */ - result = wlp_build_assoc_c4(wlp, wss, &resp); - if (result < 0) { - dev_err(dev, "WLP: Unable to construct C4 " - "message.\n"); - goto out; - } - } - } else { - /* Construct F0 frame */ - result = wlp_build_assoc_f0(wlp, &resp, WLP_ASSOC_ERROR_INV); - if (result < 0) { - dev_err(dev, "WLP: Unable to construct F0 message.\n"); - goto out; - } - } - /* Send C4 frame */ - BUG_ON(wlp->xmit_frame == NULL); - result = wlp->xmit_frame(wlp, resp, src); - if (result < 0) { - dev_err(dev, "WLP: Unable to transmit response association " - "message: %d\n", result); - if (result == -ENXIO) - dev_err(dev, "WLP: Is network interface up? \n"); - /* We could try again ... */ - dev_kfree_skb_any(resp); /* we need to free if tx fails */ - } -out: - kfree_skb(frame_ctx->skb); - kfree(frame_ctx); - mutex_unlock(&wss->mutex); -} - - diff --git a/drivers/uwb/wlp/sysfs.c b/drivers/uwb/wlp/sysfs.c deleted file mode 100644 index 6627c94cc854..000000000000 --- a/drivers/uwb/wlp/sysfs.c +++ /dev/null @@ -1,708 +0,0 @@ -/* - * WiMedia Logical Link Control Protocol (WLP) - * sysfs functions - * - * Copyright (C) 2007 Intel Corporation - * Reinette Chatre <reinette.chatre@intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - * - * FIXME: Docs - * - */ -#include <linux/wlp.h> - -#include "wlp-internal.h" - -static -size_t wlp_wss_wssid_e_print(char *buf, size_t bufsize, - struct wlp_wssid_e *wssid_e) -{ - size_t used = 0; - used += scnprintf(buf, bufsize, " WSS: "); - used += wlp_wss_uuid_print(buf + used, bufsize - used, - &wssid_e->wssid); - - if (wssid_e->info != NULL) { - used += scnprintf(buf + used, bufsize - used, " "); - used += uwb_mac_addr_print(buf + used, bufsize - used, - &wssid_e->info->bcast); - used += scnprintf(buf + used, bufsize - used, " %u %u %s\n", - wssid_e->info->accept_enroll, - wssid_e->info->sec_status, - wssid_e->info->name); - } - return used; -} - -/** - * Print out information learned from neighbor discovery - * - * Some fields being printed may not be included in the device discovery - * information (it is not mandatory). We are thus careful how the - * information is printed to ensure it is clear to the user what field is - * being referenced. - * The information being printed is for one time use - temporary storage is - * cleaned after it is printed. - * - * Ideally sysfs output should be on one line. The information printed here - * contain a few strings so it will be hard to parse if they are all - * printed on the same line - without agreeing on a standard field - * separator. - */ -static -ssize_t wlp_wss_neighborhood_print_remove(struct wlp *wlp, char *buf, - size_t bufsize) -{ - size_t used = 0; - struct wlp_neighbor_e *neighb; - struct wlp_wssid_e *wssid_e; - - mutex_lock(&wlp->nbmutex); - used = scnprintf(buf, bufsize, "#Neighbor information\n" - "#uuid dev_addr\n" - "# Device Name:\n# Model Name:\n# Manufacturer:\n" - "# Model Nr:\n# Serial:\n" - "# Pri Dev type: CategoryID OUI OUISubdiv " - "SubcategoryID\n" - "# WSS: WSSID WSS_name accept_enroll sec_status " - "bcast\n" - "# WSS: WSSID WSS_name accept_enroll sec_status " - "bcast\n\n"); - list_for_each_entry(neighb, &wlp->neighbors, node) { - if (bufsize - used <= 0) - goto out; - used += wlp_wss_uuid_print(buf + used, bufsize - used, - &neighb->uuid); - buf[used++] = ' '; - used += uwb_dev_addr_print(buf + used, bufsize - used, - &neighb->uwb_dev->dev_addr); - if (neighb->info != NULL) - used += scnprintf(buf + used, bufsize - used, - "\n Device Name: %s\n" - " Model Name: %s\n" - " Manufacturer:%s \n" - " Model Nr: %s\n" - " Serial: %s\n" - " Pri Dev type: " - "%u %02x:%02x:%02x %u %u\n", - neighb->info->name, - neighb->info->model_name, - neighb->info->manufacturer, - neighb->info->model_nr, - neighb->info->serial, - neighb->info->prim_dev_type.category, - neighb->info->prim_dev_type.OUI[0], - neighb->info->prim_dev_type.OUI[1], - neighb->info->prim_dev_type.OUI[2], - neighb->info->prim_dev_type.OUIsubdiv, - neighb->info->prim_dev_type.subID); - list_for_each_entry(wssid_e, &neighb->wssid, node) { - used += wlp_wss_wssid_e_print(buf + used, - bufsize - used, - wssid_e); - } - buf[used++] = '\n'; - wlp_remove_neighbor_tmp_info(neighb); - } - - -out: - mutex_unlock(&wlp->nbmutex); - return used; -} - - -/** - * Show properties of all WSS in neighborhood. - * - * Will trigger a complete discovery of WSS activated by this device and - * its neighbors. - */ -ssize_t wlp_neighborhood_show(struct wlp *wlp, char *buf) -{ - wlp_discover(wlp); - return wlp_wss_neighborhood_print_remove(wlp, buf, PAGE_SIZE); -} -EXPORT_SYMBOL_GPL(wlp_neighborhood_show); - -static -ssize_t __wlp_wss_properties_show(struct wlp_wss *wss, char *buf, - size_t bufsize) -{ - ssize_t result; - - result = wlp_wss_uuid_print(buf, bufsize, &wss->wssid); - result += scnprintf(buf + result, bufsize - result, " "); - result += uwb_mac_addr_print(buf + result, bufsize - result, - &wss->bcast); - result += scnprintf(buf + result, bufsize - result, - " 0x%02x %u ", wss->hash, wss->secure_status); - result += wlp_wss_key_print(buf + result, bufsize - result, - wss->master_key); - result += scnprintf(buf + result, bufsize - result, " 0x%02x ", - wss->tag); - result += uwb_mac_addr_print(buf + result, bufsize - result, - &wss->virtual_addr); - result += scnprintf(buf + result, bufsize - result, " %s", wss->name); - result += scnprintf(buf + result, bufsize - result, - "\n\n#WSSID\n#WSS broadcast address\n" - "#WSS hash\n#WSS secure status\n" - "#WSS master key\n#WSS local tag\n" - "#WSS local virtual EUI-48\n#WSS name\n"); - return result; -} - -/** - * Show which WSS is activated. - */ -ssize_t wlp_wss_activate_show(struct wlp_wss *wss, char *buf) -{ - int result = 0; - - if (mutex_lock_interruptible(&wss->mutex)) - goto out; - if (wss->state >= WLP_WSS_STATE_ACTIVE) - result = __wlp_wss_properties_show(wss, buf, PAGE_SIZE); - else - result = scnprintf(buf, PAGE_SIZE, "No local WSS active.\n"); - result += scnprintf(buf + result, PAGE_SIZE - result, - "\n\n" - "# echo WSSID SECURE_STATUS ACCEPT_ENROLLMENT " - "NAME #create new WSS\n" - "# echo WSSID [DEV ADDR] #enroll in and activate " - "existing WSS, can request registrar\n" - "#\n" - "# WSSID is a 16 byte hex array. Eg. 12 A3 3B ... \n" - "# SECURE_STATUS 0 - unsecure, 1 - secure (default)\n" - "# ACCEPT_ENROLLMENT 0 - no, 1 - yes (default)\n" - "# NAME is the text string identifying the WSS\n" - "# DEV ADDR is the device address of neighbor " - "that should be registrar. Eg. 32:AB\n"); - - mutex_unlock(&wss->mutex); -out: - return result; - -} -EXPORT_SYMBOL_GPL(wlp_wss_activate_show); - -/** - * Create/activate a new WSS or enroll/activate in neighboring WSS - * - * The user can provide the WSSID of a WSS in which it wants to enroll. - * Only the WSSID is necessary if the WSS have been discovered before. If - * the WSS has not been discovered before, or the user wants to use a - * particular neighbor as its registrar, then the user can also provide a - * device address or the neighbor that will be used as registrar. - * - * A new WSS is created when the user provides a WSSID, secure status, and - * WSS name. - */ -ssize_t wlp_wss_activate_store(struct wlp_wss *wss, - const char *buf, size_t size) -{ - ssize_t result = -EINVAL; - struct wlp_uuid wssid; - struct uwb_dev_addr dev; - struct uwb_dev_addr bcast = {.data = {0xff, 0xff} }; - char name[65]; - unsigned sec_status, accept; - memset(name, 0, sizeof(name)); - result = sscanf(buf, "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx:%02hhx", - &wssid.data[0] , &wssid.data[1], - &wssid.data[2] , &wssid.data[3], - &wssid.data[4] , &wssid.data[5], - &wssid.data[6] , &wssid.data[7], - &wssid.data[8] , &wssid.data[9], - &wssid.data[10], &wssid.data[11], - &wssid.data[12], &wssid.data[13], - &wssid.data[14], &wssid.data[15], - &dev.data[1], &dev.data[0]); - if (result == 16 || result == 17) { - result = sscanf(buf, "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%u %u %64c", - &wssid.data[0] , &wssid.data[1], - &wssid.data[2] , &wssid.data[3], - &wssid.data[4] , &wssid.data[5], - &wssid.data[6] , &wssid.data[7], - &wssid.data[8] , &wssid.data[9], - &wssid.data[10], &wssid.data[11], - &wssid.data[12], &wssid.data[13], - &wssid.data[14], &wssid.data[15], - &sec_status, &accept, name); - if (result == 16) - result = wlp_wss_enroll_activate(wss, &wssid, &bcast); - else if (result == 19) { - sec_status = sec_status == 0 ? 0 : 1; - accept = accept == 0 ? 0 : 1; - /* We read name using %c, so the newline needs to be - * removed */ - if (strlen(name) != sizeof(name) - 1) - name[strlen(name) - 1] = '\0'; - result = wlp_wss_create_activate(wss, &wssid, name, - sec_status, accept); - } else - result = -EINVAL; - } else if (result == 18) - result = wlp_wss_enroll_activate(wss, &wssid, &dev); - else - result = -EINVAL; - return result < 0 ? result : size; -} -EXPORT_SYMBOL_GPL(wlp_wss_activate_store); - -/** - * Show the UUID of this host - */ -ssize_t wlp_uuid_show(struct wlp *wlp, char *buf) -{ - ssize_t result = 0; - - mutex_lock(&wlp->mutex); - result = wlp_wss_uuid_print(buf, PAGE_SIZE, &wlp->uuid); - buf[result++] = '\n'; - mutex_unlock(&wlp->mutex); - return result; -} -EXPORT_SYMBOL_GPL(wlp_uuid_show); - -/** - * Store a new UUID for this host - * - * According to the spec this should be encoded as an octet string in the - * order the octets are shown in string representation in RFC 4122 (WLP - * 0.99 [Table 6]) - * - * We do not check value provided by user. - */ -ssize_t wlp_uuid_store(struct wlp *wlp, const char *buf, size_t size) -{ - ssize_t result; - struct wlp_uuid uuid; - - mutex_lock(&wlp->mutex); - result = sscanf(buf, "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx " - "%02hhx %02hhx %02hhx %02hhx ", - &uuid.data[0] , &uuid.data[1], - &uuid.data[2] , &uuid.data[3], - &uuid.data[4] , &uuid.data[5], - &uuid.data[6] , &uuid.data[7], - &uuid.data[8] , &uuid.data[9], - &uuid.data[10], &uuid.data[11], - &uuid.data[12], &uuid.data[13], - &uuid.data[14], &uuid.data[15]); - if (result != 16) { - result = -EINVAL; - goto error; - } - wlp->uuid = uuid; -error: - mutex_unlock(&wlp->mutex); - return result < 0 ? result : size; -} -EXPORT_SYMBOL_GPL(wlp_uuid_store); - -/** - * Show contents of members of device information structure - */ -#define wlp_dev_info_show(type) \ -ssize_t wlp_dev_##type##_show(struct wlp *wlp, char *buf) \ -{ \ - ssize_t result = 0; \ - mutex_lock(&wlp->mutex); \ - if (wlp->dev_info == NULL) { \ - result = __wlp_setup_device_info(wlp); \ - if (result < 0) \ - goto out; \ - } \ - result = scnprintf(buf, PAGE_SIZE, "%s\n", wlp->dev_info->type);\ -out: \ - mutex_unlock(&wlp->mutex); \ - return result; \ -} \ -EXPORT_SYMBOL_GPL(wlp_dev_##type##_show); - -wlp_dev_info_show(name) -wlp_dev_info_show(model_name) -wlp_dev_info_show(model_nr) -wlp_dev_info_show(manufacturer) -wlp_dev_info_show(serial) - -/** - * Store contents of members of device information structure - */ -#define wlp_dev_info_store(type, len) \ -ssize_t wlp_dev_##type##_store(struct wlp *wlp, const char *buf, size_t size)\ -{ \ - ssize_t result; \ - char format[10]; \ - mutex_lock(&wlp->mutex); \ - if (wlp->dev_info == NULL) { \ - result = __wlp_alloc_device_info(wlp); \ - if (result < 0) \ - goto out; \ - } \ - memset(wlp->dev_info->type, 0, sizeof(wlp->dev_info->type)); \ - sprintf(format, "%%%uc", len); \ - result = sscanf(buf, format, wlp->dev_info->type); \ -out: \ - mutex_unlock(&wlp->mutex); \ - return result < 0 ? result : size; \ -} \ -EXPORT_SYMBOL_GPL(wlp_dev_##type##_store); - -wlp_dev_info_store(name, 32) -wlp_dev_info_store(manufacturer, 64) -wlp_dev_info_store(model_name, 32) -wlp_dev_info_store(model_nr, 32) -wlp_dev_info_store(serial, 32) - -static -const char *__wlp_dev_category[] = { - [WLP_DEV_CAT_COMPUTER] = "Computer", - [WLP_DEV_CAT_INPUT] = "Input device", - [WLP_DEV_CAT_PRINT_SCAN_FAX_COPIER] = "Printer, scanner, FAX, or " - "Copier", - [WLP_DEV_CAT_CAMERA] = "Camera", - [WLP_DEV_CAT_STORAGE] = "Storage Network", - [WLP_DEV_CAT_INFRASTRUCTURE] = "Infrastructure", - [WLP_DEV_CAT_DISPLAY] = "Display", - [WLP_DEV_CAT_MULTIM] = "Multimedia device", - [WLP_DEV_CAT_GAMING] = "Gaming device", - [WLP_DEV_CAT_TELEPHONE] = "Telephone", - [WLP_DEV_CAT_OTHER] = "Other", -}; - -static -const char *wlp_dev_category_str(unsigned cat) -{ - if ((cat >= WLP_DEV_CAT_COMPUTER && cat <= WLP_DEV_CAT_TELEPHONE) - || cat == WLP_DEV_CAT_OTHER) - return __wlp_dev_category[cat]; - return "unknown category"; -} - -ssize_t wlp_dev_prim_category_show(struct wlp *wlp, char *buf) -{ - ssize_t result = 0; - mutex_lock(&wlp->mutex); - if (wlp->dev_info == NULL) { - result = __wlp_setup_device_info(wlp); - if (result < 0) - goto out; - } - result = scnprintf(buf, PAGE_SIZE, "%s\n", - wlp_dev_category_str(wlp->dev_info->prim_dev_type.category)); -out: - mutex_unlock(&wlp->mutex); - return result; -} -EXPORT_SYMBOL_GPL(wlp_dev_prim_category_show); - -ssize_t wlp_dev_prim_category_store(struct wlp *wlp, const char *buf, - size_t size) -{ - ssize_t result; - u16 cat; - mutex_lock(&wlp->mutex); - if (wlp->dev_info == NULL) { - result = __wlp_alloc_device_info(wlp); - if (result < 0) - goto out; - } - result = sscanf(buf, "%hu", &cat); - if ((cat >= WLP_DEV_CAT_COMPUTER && cat <= WLP_DEV_CAT_TELEPHONE) - || cat == WLP_DEV_CAT_OTHER) - wlp->dev_info->prim_dev_type.category = cat; - else - result = -EINVAL; -out: - mutex_unlock(&wlp->mutex); - return result < 0 ? result : size; -} -EXPORT_SYMBOL_GPL(wlp_dev_prim_category_store); - -ssize_t wlp_dev_prim_OUI_show(struct wlp *wlp, char *buf) -{ - ssize_t result = 0; - mutex_lock(&wlp->mutex); - if (wlp->dev_info == NULL) { - result = __wlp_setup_device_info(wlp); - if (result < 0) - goto out; - } - result = scnprintf(buf, PAGE_SIZE, "%02x:%02x:%02x\n", - wlp->dev_info->prim_dev_type.OUI[0], - wlp->dev_info->prim_dev_type.OUI[1], - wlp->dev_info->prim_dev_type.OUI[2]); -out: - mutex_unlock(&wlp->mutex); - return result; -} -EXPORT_SYMBOL_GPL(wlp_dev_prim_OUI_show); - -ssize_t wlp_dev_prim_OUI_store(struct wlp *wlp, const char *buf, size_t size) -{ - ssize_t result; - u8 OUI[3]; - mutex_lock(&wlp->mutex); - if (wlp->dev_info == NULL) { - result = __wlp_alloc_device_info(wlp); - if (result < 0) - goto out; - } - result = sscanf(buf, "%hhx:%hhx:%hhx", - &OUI[0], &OUI[1], &OUI[2]); - if (result != 3) { - result = -EINVAL; - goto out; - } else - memcpy(wlp->dev_info->prim_dev_type.OUI, OUI, sizeof(OUI)); -out: - mutex_unlock(&wlp->mutex); - return result < 0 ? result : size; -} -EXPORT_SYMBOL_GPL(wlp_dev_prim_OUI_store); - - -ssize_t wlp_dev_prim_OUI_sub_show(struct wlp *wlp, char *buf) -{ - ssize_t result = 0; - mutex_lock(&wlp->mutex); - if (wlp->dev_info == NULL) { - result = __wlp_setup_device_info(wlp); - if (result < 0) - goto out; - } - result = scnprintf(buf, PAGE_SIZE, "%u\n", - wlp->dev_info->prim_dev_type.OUIsubdiv); -out: - mutex_unlock(&wlp->mutex); - return result; -} -EXPORT_SYMBOL_GPL(wlp_dev_prim_OUI_sub_show); - -ssize_t wlp_dev_prim_OUI_sub_store(struct wlp *wlp, const char *buf, - size_t size) -{ - ssize_t result; - unsigned sub; - u8 max_sub = ~0; - mutex_lock(&wlp->mutex); - if (wlp->dev_info == NULL) { - result = __wlp_alloc_device_info(wlp); - if (result < 0) - goto out; - } - result = sscanf(buf, "%u", &sub); - if (sub <= max_sub) - wlp->dev_info->prim_dev_type.OUIsubdiv = sub; - else - result = -EINVAL; -out: - mutex_unlock(&wlp->mutex); - return result < 0 ? result : size; -} -EXPORT_SYMBOL_GPL(wlp_dev_prim_OUI_sub_store); - -ssize_t wlp_dev_prim_subcat_show(struct wlp *wlp, char *buf) -{ - ssize_t result = 0; - mutex_lock(&wlp->mutex); - if (wlp->dev_info == NULL) { - result = __wlp_setup_device_info(wlp); - if (result < 0) - goto out; - } - result = scnprintf(buf, PAGE_SIZE, "%u\n", - wlp->dev_info->prim_dev_type.subID); -out: - mutex_unlock(&wlp->mutex); - return result; -} -EXPORT_SYMBOL_GPL(wlp_dev_prim_subcat_show); - -ssize_t wlp_dev_prim_subcat_store(struct wlp *wlp, const char *buf, - size_t size) -{ - ssize_t result; - unsigned sub; - __le16 max_sub = ~0; - mutex_lock(&wlp->mutex); - if (wlp->dev_info == NULL) { - result = __wlp_alloc_device_info(wlp); - if (result < 0) - goto out; - } - result = sscanf(buf, "%u", &sub); - if (sub <= max_sub) - wlp->dev_info->prim_dev_type.subID = sub; - else - result = -EINVAL; -out: - mutex_unlock(&wlp->mutex); - return result < 0 ? result : size; -} -EXPORT_SYMBOL_GPL(wlp_dev_prim_subcat_store); - -/** - * Subsystem implementation for interaction with individual WSS via sysfs - * - * Followed instructions for subsystem in Documentation/filesystems/sysfs.txt - */ - -#define kobj_to_wlp_wss(obj) container_of(obj, struct wlp_wss, kobj) -#define attr_to_wlp_wss_attr(_attr) \ - container_of(_attr, struct wlp_wss_attribute, attr) - -/** - * Sysfs subsystem: forward read calls - * - * Sysfs operation for forwarding read call to the show method of the - * attribute owner - */ -static -ssize_t wlp_wss_attr_show(struct kobject *kobj, struct attribute *attr, - char *buf) -{ - struct wlp_wss_attribute *wss_attr = attr_to_wlp_wss_attr(attr); - struct wlp_wss *wss = kobj_to_wlp_wss(kobj); - ssize_t ret = -EIO; - - if (wss_attr->show) - ret = wss_attr->show(wss, buf); - return ret; -} -/** - * Sysfs subsystem: forward write calls - * - * Sysfs operation for forwarding write call to the store method of the - * attribute owner - */ -static -ssize_t wlp_wss_attr_store(struct kobject *kobj, struct attribute *attr, - const char *buf, size_t count) -{ - struct wlp_wss_attribute *wss_attr = attr_to_wlp_wss_attr(attr); - struct wlp_wss *wss = kobj_to_wlp_wss(kobj); - ssize_t ret = -EIO; - - if (wss_attr->store) - ret = wss_attr->store(wss, buf, count); - return ret; -} - -static const struct sysfs_ops wss_sysfs_ops = { - .show = wlp_wss_attr_show, - .store = wlp_wss_attr_store, -}; - -struct kobj_type wss_ktype = { - .release = wlp_wss_release, - .sysfs_ops = &wss_sysfs_ops, -}; - - -/** - * Sysfs files for individual WSS - */ - -/** - * Print static properties of this WSS - * - * The name of a WSS may not be null teminated. It's max size is 64 bytes - * so we copy it to a larger array just to make sure we print sane data. - */ -static ssize_t wlp_wss_properties_show(struct wlp_wss *wss, char *buf) -{ - int result = 0; - - if (mutex_lock_interruptible(&wss->mutex)) - goto out; - result = __wlp_wss_properties_show(wss, buf, PAGE_SIZE); - mutex_unlock(&wss->mutex); -out: - return result; -} -WSS_ATTR(properties, S_IRUGO, wlp_wss_properties_show, NULL); - -/** - * Print all connected members of this WSS - * The EDA cache contains all members of WSS neighborhood. - */ -static ssize_t wlp_wss_members_show(struct wlp_wss *wss, char *buf) -{ - struct wlp *wlp = container_of(wss, struct wlp, wss); - return wlp_eda_show(wlp, buf); -} -WSS_ATTR(members, S_IRUGO, wlp_wss_members_show, NULL); - -static -const char *__wlp_strstate[] = { - "none", - "partially enrolled", - "enrolled", - "active", - "connected", -}; - -static const char *wlp_wss_strstate(unsigned state) -{ - if (state >= ARRAY_SIZE(__wlp_strstate)) - return "unknown state"; - return __wlp_strstate[state]; -} - -/* - * Print current state of this WSS - */ -static ssize_t wlp_wss_state_show(struct wlp_wss *wss, char *buf) -{ - int result = 0; - - if (mutex_lock_interruptible(&wss->mutex)) - goto out; - result = scnprintf(buf, PAGE_SIZE, "%s\n", - wlp_wss_strstate(wss->state)); - mutex_unlock(&wss->mutex); -out: - return result; -} -WSS_ATTR(state, S_IRUGO, wlp_wss_state_show, NULL); - - -static -struct attribute *wss_attrs[] = { - &wss_attr_properties.attr, - &wss_attr_members.attr, - &wss_attr_state.attr, - NULL, -}; - -struct attribute_group wss_attr_group = { - .name = NULL, /* we want them in the same directory */ - .attrs = wss_attrs, -}; diff --git a/drivers/uwb/wlp/txrx.c b/drivers/uwb/wlp/txrx.c deleted file mode 100644 index 05dde44b3592..000000000000 --- a/drivers/uwb/wlp/txrx.c +++ /dev/null @@ -1,354 +0,0 @@ -/* - * WiMedia Logical Link Control Protocol (WLP) - * Message exchange infrastructure - * - * Copyright (C) 2007 Intel Corporation - * Reinette Chatre <reinette.chatre@intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - * - * FIXME: Docs - * - */ - -#include <linux/etherdevice.h> -#include <linux/slab.h> -#include <linux/wlp.h> - -#include "wlp-internal.h" - -/* - * Direct incoming association msg to correct parsing routine - * - * We only expect D1, E1, C1, C3 messages as new. All other incoming - * association messages should form part of an established session that is - * handled elsewhere. - * The handling of these messages often require calling sleeping functions - * - this cannot be done in interrupt context. We use the kernel's - * workqueue to handle these messages. - */ -static -void wlp_direct_assoc_frame(struct wlp *wlp, struct sk_buff *skb, - struct uwb_dev_addr *src) -{ - struct device *dev = &wlp->rc->uwb_dev.dev; - struct wlp_frame_assoc *assoc = (void *) skb->data; - struct wlp_assoc_frame_ctx *frame_ctx; - - frame_ctx = kmalloc(sizeof(*frame_ctx), GFP_ATOMIC); - if (frame_ctx == NULL) { - dev_err(dev, "WLP: Unable to allocate memory for association " - "frame handling.\n"); - kfree_skb(skb); - return; - } - frame_ctx->wlp = wlp; - frame_ctx->skb = skb; - frame_ctx->src = *src; - switch (assoc->type) { - case WLP_ASSOC_D1: - INIT_WORK(&frame_ctx->ws, wlp_handle_d1_frame); - schedule_work(&frame_ctx->ws); - break; - case WLP_ASSOC_E1: - kfree_skb(skb); /* Temporary until we handle it */ - kfree(frame_ctx); /* Temporary until we handle it */ - break; - case WLP_ASSOC_C1: - INIT_WORK(&frame_ctx->ws, wlp_handle_c1_frame); - schedule_work(&frame_ctx->ws); - break; - case WLP_ASSOC_C3: - INIT_WORK(&frame_ctx->ws, wlp_handle_c3_frame); - schedule_work(&frame_ctx->ws); - break; - default: - dev_err(dev, "Received unexpected association frame. " - "Type = %d \n", assoc->type); - kfree_skb(skb); - kfree(frame_ctx); - break; - } -} - -/* - * Process incoming association frame - * - * Although it could be possible to deal with some incoming association - * messages without creating a new session we are keeping things simple. We - * do not accept new association messages if there is a session in progress - * and the messages do not belong to that session. - * - * If an association message arrives that causes the creation of a session - * (WLP_ASSOC_E1) while we are in the process of creating a session then we - * rely on the neighbor mutex to protect the data. That is, the new session - * will not be started until the previous is completed. - */ -static -void wlp_receive_assoc_frame(struct wlp *wlp, struct sk_buff *skb, - struct uwb_dev_addr *src) -{ - struct device *dev = &wlp->rc->uwb_dev.dev; - struct wlp_frame_assoc *assoc = (void *) skb->data; - struct wlp_session *session = wlp->session; - u8 version; - - if (wlp_get_version(wlp, &assoc->version, &version, - sizeof(assoc->version)) < 0) - goto error; - if (version != WLP_VERSION) { - dev_err(dev, "Unsupported WLP version in association " - "message.\n"); - goto error; - } - if (session != NULL) { - /* Function that created this session is still holding the - * &wlp->mutex to protect this session. */ - if (assoc->type == session->exp_message || - assoc->type == WLP_ASSOC_F0) { - if (!memcmp(&session->neighbor_addr, src, - sizeof(*src))) { - session->data = skb; - (session->cb)(wlp); - } else { - dev_err(dev, "Received expected message from " - "unexpected source. Expected message " - "%d or F0 from %02x:%02x, but received " - "it from %02x:%02x. Dropping.\n", - session->exp_message, - session->neighbor_addr.data[1], - session->neighbor_addr.data[0], - src->data[1], src->data[0]); - goto error; - } - } else { - dev_err(dev, "Association already in progress. " - "Dropping.\n"); - goto error; - } - } else { - wlp_direct_assoc_frame(wlp, skb, src); - } - return; -error: - kfree_skb(skb); -} - -/* - * Verify incoming frame is from connected neighbor, prep to pass to WLP client - * - * Verification proceeds according to WLP 0.99 [7.3.1]. The source address - * is used to determine which neighbor is sending the frame and the WSS tag - * is used to know to which WSS the frame belongs (we only support one WSS - * so this test is straight forward). - * With the WSS found we need to ensure that we are connected before - * allowing the exchange of data frames. - */ -static -int wlp_verify_prep_rx_frame(struct wlp *wlp, struct sk_buff *skb, - struct uwb_dev_addr *src) -{ - struct device *dev = &wlp->rc->uwb_dev.dev; - int result = -EINVAL; - struct wlp_eda_node eda_entry; - struct wlp_frame_std_abbrv_hdr *hdr = (void *) skb->data; - - /*verify*/ - result = wlp_copy_eda_node(&wlp->eda, src, &eda_entry); - if (result < 0) { - if (printk_ratelimit()) - dev_err(dev, "WLP: Incoming frame is from unknown " - "neighbor %02x:%02x.\n", src->data[1], - src->data[0]); - goto out; - } - if (hdr->tag != eda_entry.tag) { - if (printk_ratelimit()) - dev_err(dev, "WLP: Tag of incoming frame from " - "%02x:%02x does not match expected tag. " - "Received 0x%02x, expected 0x%02x. \n", - src->data[1], src->data[0], hdr->tag, - eda_entry.tag); - result = -EINVAL; - goto out; - } - if (eda_entry.state != WLP_WSS_CONNECTED) { - if (printk_ratelimit()) - dev_err(dev, "WLP: Incoming frame from " - "%02x:%02x does is not from connected WSS.\n", - src->data[1], src->data[0]); - result = -EINVAL; - goto out; - } - /*prep*/ - skb_pull(skb, sizeof(*hdr)); -out: - return result; -} - -/* - * Receive a WLP frame from device - * - * @returns: 1 if calling function should free the skb - * 0 if it successfully handled skb and freed it - * 0 if error occured, will free skb in this case - */ -int wlp_receive_frame(struct device *dev, struct wlp *wlp, struct sk_buff *skb, - struct uwb_dev_addr *src) -{ - unsigned len = skb->len; - void *ptr = skb->data; - struct wlp_frame_hdr *hdr; - int result = 0; - - if (len < sizeof(*hdr)) { - dev_err(dev, "Not enough data to parse WLP header.\n"); - result = -EINVAL; - goto out; - } - hdr = ptr; - if (le16_to_cpu(hdr->mux_hdr) != WLP_PROTOCOL_ID) { - dev_err(dev, "Not a WLP frame type.\n"); - result = -EINVAL; - goto out; - } - switch (hdr->type) { - case WLP_FRAME_STANDARD: - if (len < sizeof(struct wlp_frame_std_abbrv_hdr)) { - dev_err(dev, "Not enough data to parse Standard " - "WLP header.\n"); - goto out; - } - result = wlp_verify_prep_rx_frame(wlp, skb, src); - if (result < 0) { - if (printk_ratelimit()) - dev_err(dev, "WLP: Verification of frame " - "from neighbor %02x:%02x failed.\n", - src->data[1], src->data[0]); - goto out; - } - result = 1; - break; - case WLP_FRAME_ABBREVIATED: - dev_err(dev, "Abbreviated frame received. FIXME?\n"); - kfree_skb(skb); - break; - case WLP_FRAME_CONTROL: - dev_err(dev, "Control frame received. FIXME?\n"); - kfree_skb(skb); - break; - case WLP_FRAME_ASSOCIATION: - if (len < sizeof(struct wlp_frame_assoc)) { - dev_err(dev, "Not enough data to parse Association " - "WLP header.\n"); - goto out; - } - wlp_receive_assoc_frame(wlp, skb, src); - break; - default: - dev_err(dev, "Invalid frame received.\n"); - result = -EINVAL; - break; - } -out: - if (result < 0) { - kfree_skb(skb); - result = 0; - } - return result; -} -EXPORT_SYMBOL_GPL(wlp_receive_frame); - - -/* - * Verify frame from network stack, prepare for further transmission - * - * @skb: the socket buffer that needs to be prepared for transmission (it - * is in need of a WLP header). If this is a broadcast frame we take - * over the entire transmission. - * If it is a unicast the WSS connection should already be established - * and transmission will be done by the calling function. - * @dst: On return this will contain the device address to which the - * frame is destined. - * @returns: 0 on success no tx : WLP header successfully applied to skb buffer, - * calling function can proceed with tx - * 1 on success with tx : WLP will take over transmission of this - * frame - * <0 on error - * - * The network stack (WLP client) is attempting to transmit a frame. We can - * only transmit data if a local WSS is at least active (connection will be - * done here if this is a broadcast frame and neighbor also has the WSS - * active). - * - * The frame can be either broadcast or unicast. Broadcast in a WSS is - * supported via multicast, but we don't support multicast yet (until - * devices start to support MAB IEs). If a broadcast frame needs to be - * transmitted it is treated as a unicast frame to each neighbor. In this - * case the WLP takes over transmission of the skb and returns 1 - * to the caller to indicate so. Also, in this case, if a neighbor has the - * same WSS activated but is not connected then the WSS connection will be - * done at this time. The neighbor's virtual address will be learned at - * this time. - * - * The destination address in a unicast frame is the virtual address of the - * neighbor. This address only becomes known when a WSS connection is - * established. We thus rely on a broadcast frame to trigger the setup of - * WSS connections to all neighbors before we are able to send unicast - * frames to them. This seems reasonable as IP would usually use ARP first - * before any unicast frames are sent. - * - * If we are already connected to the neighbor (neighbor's virtual address - * is known) we just prepare the WLP header and the caller will continue to - * send the frame. - * - * A failure in this function usually indicates something that cannot be - * fixed automatically. So, if this function fails (@return < 0) the calling - * function should not retry to send the frame as it will very likely keep - * failing. - * - */ -int wlp_prepare_tx_frame(struct device *dev, struct wlp *wlp, - struct sk_buff *skb, struct uwb_dev_addr *dst) -{ - int result = -EINVAL; - struct ethhdr *eth_hdr = (void *) skb->data; - - if (is_multicast_ether_addr(eth_hdr->h_dest)) { - result = wlp_eda_for_each(&wlp->eda, wlp_wss_send_copy, skb); - if (result < 0) { - if (printk_ratelimit()) - dev_err(dev, "Unable to handle broadcast " - "frame from WLP client.\n"); - goto out; - } - dev_kfree_skb_irq(skb); - result = 1; - /* Frame will be transmitted by WLP. */ - } else { - result = wlp_eda_for_virtual(&wlp->eda, eth_hdr->h_dest, dst, - wlp_wss_prep_hdr, skb); - if (unlikely(result < 0)) { - if (printk_ratelimit()) - dev_err(dev, "Unable to prepare " - "skb for transmission. \n"); - goto out; - } - } -out: - return result; -} -EXPORT_SYMBOL_GPL(wlp_prepare_tx_frame); diff --git a/drivers/uwb/wlp/wlp-internal.h b/drivers/uwb/wlp/wlp-internal.h deleted file mode 100644 index 3e8d5de7c5b9..000000000000 --- a/drivers/uwb/wlp/wlp-internal.h +++ /dev/null @@ -1,224 +0,0 @@ -/* - * WiMedia Logical Link Control Protocol (WLP) - * Internal API - * - * Copyright (C) 2007 Intel Corporation - * Reinette Chatre <reinette.chatre@intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - */ - -#ifndef __WLP_INTERNAL_H__ -#define __WLP_INTERNAL_H__ - -/** - * State of WSS connection - * - * A device needs to connect to a neighbor in an activated WSS before data - * can be transmitted. The spec also distinguishes between a new connection - * attempt and a connection attempt after previous connection attempts. The - * state WLP_WSS_CONNECT_FAILED is used for this scenario. See WLP 0.99 - * [7.2.6] - */ -enum wlp_wss_connect { - WLP_WSS_UNCONNECTED = 0, - WLP_WSS_CONNECTED, - WLP_WSS_CONNECT_FAILED, -}; - -extern struct kobj_type wss_ktype; -extern struct attribute_group wss_attr_group; - -/* This should be changed to a dynamic array where entries are sorted - * by eth_addr and search is done in a binary form - * - * Although thinking twice about it: this technologie's maximum reach - * is 10 meters...unless you want to pack too much stuff in around - * your radio controller/WLP device, the list will probably not be - * too big. - * - * In any case, there is probably some data structure in the kernel - * than we could reused for that already. - * - * The below structure is really just good while we support one WSS per - * host. - */ -struct wlp_eda_node { - struct list_head list_node; - unsigned char eth_addr[ETH_ALEN]; - struct uwb_dev_addr dev_addr; - struct wlp_wss *wss; - unsigned char virt_addr[ETH_ALEN]; - u8 tag; - enum wlp_wss_connect state; -}; - -typedef int (*wlp_eda_for_each_f)(struct wlp *, struct wlp_eda_node *, void *); - -extern void wlp_eda_init(struct wlp_eda *); -extern void wlp_eda_release(struct wlp_eda *); -extern int wlp_eda_create_node(struct wlp_eda *, - const unsigned char eth_addr[ETH_ALEN], - const struct uwb_dev_addr *); -extern void wlp_eda_rm_node(struct wlp_eda *, const struct uwb_dev_addr *); -extern int wlp_eda_update_node(struct wlp_eda *, - const struct uwb_dev_addr *, - struct wlp_wss *, - const unsigned char virt_addr[ETH_ALEN], - const u8, const enum wlp_wss_connect); -extern int wlp_eda_update_node_state(struct wlp_eda *, - const struct uwb_dev_addr *, - const enum wlp_wss_connect); - -extern int wlp_copy_eda_node(struct wlp_eda *, struct uwb_dev_addr *, - struct wlp_eda_node *); -extern int wlp_eda_for_each(struct wlp_eda *, wlp_eda_for_each_f , void *); -extern int wlp_eda_for_virtual(struct wlp_eda *, - const unsigned char eth_addr[ETH_ALEN], - struct uwb_dev_addr *, - wlp_eda_for_each_f , void *); - - -extern void wlp_remove_neighbor_tmp_info(struct wlp_neighbor_e *); - -extern size_t wlp_wss_key_print(char *, size_t, u8 *); - -/* Function called when no more references to WSS exists */ -extern void wlp_wss_release(struct kobject *); - -extern void wlp_wss_reset(struct wlp_wss *); -extern int wlp_wss_create_activate(struct wlp_wss *, struct wlp_uuid *, - char *, unsigned, unsigned); -extern int wlp_wss_enroll_activate(struct wlp_wss *, struct wlp_uuid *, - struct uwb_dev_addr *); -extern ssize_t wlp_discover(struct wlp *); - -extern int wlp_enroll_neighbor(struct wlp *, struct wlp_neighbor_e *, - struct wlp_wss *, struct wlp_uuid *); -extern int wlp_wss_is_active(struct wlp *, struct wlp_wss *, - struct uwb_dev_addr *); - -struct wlp_assoc_conn_ctx { - struct work_struct ws; - struct wlp *wlp; - struct sk_buff *skb; - struct wlp_eda_node eda_entry; -}; - - -extern int wlp_wss_connect_prep(struct wlp *, struct wlp_eda_node *, void *); -extern int wlp_wss_send_copy(struct wlp *, struct wlp_eda_node *, void *); - - -/* Message handling */ -struct wlp_assoc_frame_ctx { - struct work_struct ws; - struct wlp *wlp; - struct sk_buff *skb; - struct uwb_dev_addr src; -}; - -extern int wlp_wss_prep_hdr(struct wlp *, struct wlp_eda_node *, void *); -extern void wlp_handle_d1_frame(struct work_struct *); -extern int wlp_parse_d2_frame_to_cache(struct wlp *, struct sk_buff *, - struct wlp_neighbor_e *); -extern int wlp_parse_d2_frame_to_enroll(struct wlp_wss *, struct sk_buff *, - struct wlp_neighbor_e *, - struct wlp_uuid *); -extern void wlp_handle_c1_frame(struct work_struct *); -extern void wlp_handle_c3_frame(struct work_struct *); -extern int wlp_parse_c3c4_frame(struct wlp *, struct sk_buff *, - struct wlp_uuid *, u8 *, - struct uwb_mac_addr *); -extern int wlp_parse_f0(struct wlp *, struct sk_buff *); -extern int wlp_send_assoc_frame(struct wlp *, struct wlp_wss *, - struct uwb_dev_addr *, enum wlp_assoc_type); -extern ssize_t wlp_get_version(struct wlp *, struct wlp_attr_version *, - u8 *, ssize_t); -extern ssize_t wlp_get_wssid(struct wlp *, struct wlp_attr_wssid *, - struct wlp_uuid *, ssize_t); -extern int __wlp_alloc_device_info(struct wlp *); -extern int __wlp_setup_device_info(struct wlp *); - -extern struct wlp_wss_attribute wss_attribute_properties; -extern struct wlp_wss_attribute wss_attribute_members; -extern struct wlp_wss_attribute wss_attribute_state; - -static inline -size_t wlp_wss_uuid_print(char *buf, size_t bufsize, struct wlp_uuid *uuid) -{ - size_t result; - - result = scnprintf(buf, bufsize, - "%02x:%02x:%02x:%02x:%02x:%02x:" - "%02x:%02x:%02x:%02x:%02x:%02x:" - "%02x:%02x:%02x:%02x", - uuid->data[0], uuid->data[1], - uuid->data[2], uuid->data[3], - uuid->data[4], uuid->data[5], - uuid->data[6], uuid->data[7], - uuid->data[8], uuid->data[9], - uuid->data[10], uuid->data[11], - uuid->data[12], uuid->data[13], - uuid->data[14], uuid->data[15]); - return result; -} - -/** - * FIXME: How should a nonce be displayed? - */ -static inline -size_t wlp_wss_nonce_print(char *buf, size_t bufsize, struct wlp_nonce *nonce) -{ - size_t result; - - result = scnprintf(buf, bufsize, - "%02x %02x %02x %02x %02x %02x " - "%02x %02x %02x %02x %02x %02x " - "%02x %02x %02x %02x", - nonce->data[0], nonce->data[1], - nonce->data[2], nonce->data[3], - nonce->data[4], nonce->data[5], - nonce->data[6], nonce->data[7], - nonce->data[8], nonce->data[9], - nonce->data[10], nonce->data[11], - nonce->data[12], nonce->data[13], - nonce->data[14], nonce->data[15]); - return result; -} - - -static inline -void wlp_session_cb(struct wlp *wlp) -{ - struct completion *completion = wlp->session->cb_priv; - complete(completion); -} - -static inline -int wlp_uuid_is_set(struct wlp_uuid *uuid) -{ - struct wlp_uuid zero_uuid = { .data = { 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00} }; - - if (!memcmp(uuid, &zero_uuid, sizeof(*uuid))) - return 0; - return 1; -} - -#endif /* __WLP_INTERNAL_H__ */ diff --git a/drivers/uwb/wlp/wlp-lc.c b/drivers/uwb/wlp/wlp-lc.c deleted file mode 100644 index 7f6a630bf26c..000000000000 --- a/drivers/uwb/wlp/wlp-lc.c +++ /dev/null @@ -1,560 +0,0 @@ -/* - * WiMedia Logical Link Control Protocol (WLP) - * - * Copyright (C) 2005-2006 Intel Corporation - * Reinette Chatre <reinette.chatre@intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - * - * FIXME: docs - */ -#include <linux/wlp.h> -#include <linux/slab.h> - -#include "wlp-internal.h" - -static -void wlp_neighbor_init(struct wlp_neighbor_e *neighbor) -{ - INIT_LIST_HEAD(&neighbor->wssid); -} - -/** - * Create area for device information storage - * - * wlp->mutex must be held - */ -int __wlp_alloc_device_info(struct wlp *wlp) -{ - struct device *dev = &wlp->rc->uwb_dev.dev; - BUG_ON(wlp->dev_info != NULL); - wlp->dev_info = kzalloc(sizeof(struct wlp_device_info), GFP_KERNEL); - if (wlp->dev_info == NULL) { - dev_err(dev, "WLP: Unable to allocate memory for " - "device information.\n"); - return -ENOMEM; - } - return 0; -} - - -/** - * Fill in device information using function provided by driver - * - * wlp->mutex must be held - */ -static -void __wlp_fill_device_info(struct wlp *wlp) -{ - wlp->fill_device_info(wlp, wlp->dev_info); -} - -/** - * Setup device information - * - * Allocate area for device information and populate it. - * - * wlp->mutex must be held - */ -int __wlp_setup_device_info(struct wlp *wlp) -{ - int result; - struct device *dev = &wlp->rc->uwb_dev.dev; - - result = __wlp_alloc_device_info(wlp); - if (result < 0) { - dev_err(dev, "WLP: Unable to allocate area for " - "device information.\n"); - return result; - } - __wlp_fill_device_info(wlp); - return 0; -} - -/** - * Remove information about neighbor stored temporarily - * - * Information learned during discovey should only be stored when the - * device enrolls in the neighbor's WSS. We do need to store this - * information temporarily in order to present it to the user. - * - * We are only interested in keeping neighbor WSS information if that - * neighbor is accepting enrollment. - * - * should be called with wlp->nbmutex held - */ -void wlp_remove_neighbor_tmp_info(struct wlp_neighbor_e *neighbor) -{ - struct wlp_wssid_e *wssid_e, *next; - u8 keep; - if (!list_empty(&neighbor->wssid)) { - list_for_each_entry_safe(wssid_e, next, &neighbor->wssid, - node) { - if (wssid_e->info != NULL) { - keep = wssid_e->info->accept_enroll; - kfree(wssid_e->info); - wssid_e->info = NULL; - if (!keep) { - list_del(&wssid_e->node); - kfree(wssid_e); - } - } - } - } - if (neighbor->info != NULL) { - kfree(neighbor->info); - neighbor->info = NULL; - } -} - -/* - * Populate WLP neighborhood cache with neighbor information - * - * A new neighbor is found. If it is discoverable then we add it to the - * neighborhood cache. - * - */ -static -int wlp_add_neighbor(struct wlp *wlp, struct uwb_dev *dev) -{ - int result = 0; - int discoverable; - struct wlp_neighbor_e *neighbor; - - /* - * FIXME: - * Use contents of WLP IE found in beacon cache to determine if - * neighbor is discoverable. - * The device does not support WLP IE yet so this still needs to be - * done. Until then we assume all devices are discoverable. - */ - discoverable = 1; /* will be changed when FIXME disappears */ - if (discoverable) { - /* Add neighbor to cache for discovery */ - neighbor = kzalloc(sizeof(*neighbor), GFP_KERNEL); - if (neighbor == NULL) { - dev_err(&dev->dev, "Unable to create memory for " - "new neighbor. \n"); - result = -ENOMEM; - goto error_no_mem; - } - wlp_neighbor_init(neighbor); - uwb_dev_get(dev); - neighbor->uwb_dev = dev; - list_add(&neighbor->node, &wlp->neighbors); - } -error_no_mem: - return result; -} - -/** - * Remove one neighbor from cache - */ -static -void __wlp_neighbor_release(struct wlp_neighbor_e *neighbor) -{ - struct wlp_wssid_e *wssid_e, *next_wssid_e; - - list_for_each_entry_safe(wssid_e, next_wssid_e, - &neighbor->wssid, node) { - list_del(&wssid_e->node); - kfree(wssid_e); - } - uwb_dev_put(neighbor->uwb_dev); - list_del(&neighbor->node); - kfree(neighbor); -} - -/** - * Clear entire neighborhood cache. - */ -static -void __wlp_neighbors_release(struct wlp *wlp) -{ - struct wlp_neighbor_e *neighbor, *next; - if (list_empty(&wlp->neighbors)) - return; - list_for_each_entry_safe(neighbor, next, &wlp->neighbors, node) { - __wlp_neighbor_release(neighbor); - } -} - -static -void wlp_neighbors_release(struct wlp *wlp) -{ - mutex_lock(&wlp->nbmutex); - __wlp_neighbors_release(wlp); - mutex_unlock(&wlp->nbmutex); -} - - - -/** - * Send D1 message to neighbor, receive D2 message - * - * @neighbor: neighbor to which D1 message will be sent - * @wss: if not NULL, it is an enrollment request for this WSS - * @wssid: if wss not NULL, this is the wssid of the WSS in which we - * want to enroll - * - * A D1/D2 exchange is done for one of two reasons: discovery or - * enrollment. If done for discovery the D1 message is sent to the neighbor - * and the contents of the D2 response is stored in a temporary cache. - * If done for enrollment the @wss and @wssid are provided also. In this - * case the D1 message is sent to the neighbor, the D2 response is parsed - * for enrollment of the WSS with wssid. - * - * &wss->mutex is held - */ -static -int wlp_d1d2_exchange(struct wlp *wlp, struct wlp_neighbor_e *neighbor, - struct wlp_wss *wss, struct wlp_uuid *wssid) -{ - int result; - struct device *dev = &wlp->rc->uwb_dev.dev; - DECLARE_COMPLETION_ONSTACK(completion); - struct wlp_session session; - struct sk_buff *skb; - struct wlp_frame_assoc *resp; - struct uwb_dev_addr *dev_addr = &neighbor->uwb_dev->dev_addr; - - mutex_lock(&wlp->mutex); - if (!wlp_uuid_is_set(&wlp->uuid)) { - dev_err(dev, "WLP: UUID is not set. Set via sysfs to " - "proceed.\n"); - result = -ENXIO; - goto out; - } - /* Send D1 association frame */ - result = wlp_send_assoc_frame(wlp, wss, dev_addr, WLP_ASSOC_D1); - if (result < 0) { - dev_err(dev, "Unable to send D1 frame to neighbor " - "%02x:%02x (%d)\n", dev_addr->data[1], - dev_addr->data[0], result); - goto out; - } - /* Create session, wait for response */ - session.exp_message = WLP_ASSOC_D2; - session.cb = wlp_session_cb; - session.cb_priv = &completion; - session.neighbor_addr = *dev_addr; - BUG_ON(wlp->session != NULL); - wlp->session = &session; - /* Wait for D2/F0 frame */ - result = wait_for_completion_interruptible_timeout(&completion, - WLP_PER_MSG_TIMEOUT * HZ); - if (result == 0) { - result = -ETIMEDOUT; - dev_err(dev, "Timeout while sending D1 to neighbor " - "%02x:%02x.\n", dev_addr->data[1], - dev_addr->data[0]); - goto error_session; - } - if (result < 0) { - dev_err(dev, "Unable to discover/enroll neighbor %02x:%02x.\n", - dev_addr->data[1], dev_addr->data[0]); - goto error_session; - } - /* Parse message in session->data: it will be either D2 or F0 */ - skb = session.data; - resp = (void *) skb->data; - - if (resp->type == WLP_ASSOC_F0) { - result = wlp_parse_f0(wlp, skb); - if (result < 0) - dev_err(dev, "WLP: Unable to parse F0 from neighbor " - "%02x:%02x.\n", dev_addr->data[1], - dev_addr->data[0]); - result = -EINVAL; - goto error_resp_parse; - } - if (wss == NULL) { - /* Discovery */ - result = wlp_parse_d2_frame_to_cache(wlp, skb, neighbor); - if (result < 0) { - dev_err(dev, "WLP: Unable to parse D2 message from " - "neighbor %02x:%02x for discovery.\n", - dev_addr->data[1], dev_addr->data[0]); - goto error_resp_parse; - } - } else { - /* Enrollment */ - result = wlp_parse_d2_frame_to_enroll(wss, skb, neighbor, - wssid); - if (result < 0) { - dev_err(dev, "WLP: Unable to parse D2 message from " - "neighbor %02x:%02x for enrollment.\n", - dev_addr->data[1], dev_addr->data[0]); - goto error_resp_parse; - } - } -error_resp_parse: - kfree_skb(skb); -error_session: - wlp->session = NULL; -out: - mutex_unlock(&wlp->mutex); - return result; -} - -/** - * Enroll into WSS of provided WSSID by using neighbor as registrar - * - * &wss->mutex is held - */ -int wlp_enroll_neighbor(struct wlp *wlp, struct wlp_neighbor_e *neighbor, - struct wlp_wss *wss, struct wlp_uuid *wssid) -{ - int result = 0; - struct device *dev = &wlp->rc->uwb_dev.dev; - char buf[WLP_WSS_UUID_STRSIZE]; - struct uwb_dev_addr *dev_addr = &neighbor->uwb_dev->dev_addr; - - wlp_wss_uuid_print(buf, sizeof(buf), wssid); - - result = wlp_d1d2_exchange(wlp, neighbor, wss, wssid); - if (result < 0) { - dev_err(dev, "WLP: D1/D2 message exchange for enrollment " - "failed. result = %d \n", result); - goto out; - } - if (wss->state != WLP_WSS_STATE_PART_ENROLLED) { - dev_err(dev, "WLP: Unable to enroll into WSS %s using " - "neighbor %02x:%02x. \n", buf, - dev_addr->data[1], dev_addr->data[0]); - result = -EINVAL; - goto out; - } - if (wss->secure_status == WLP_WSS_SECURE) { - dev_err(dev, "FIXME: need to complete secure enrollment.\n"); - result = -EINVAL; - goto error; - } else { - wss->state = WLP_WSS_STATE_ENROLLED; - dev_dbg(dev, "WLP: Success Enrollment into unsecure WSS " - "%s using neighbor %02x:%02x. \n", - buf, dev_addr->data[1], dev_addr->data[0]); - } -out: - return result; -error: - wlp_wss_reset(wss); - return result; -} - -/** - * Discover WSS information of neighbor's active WSS - */ -static -int wlp_discover_neighbor(struct wlp *wlp, - struct wlp_neighbor_e *neighbor) -{ - return wlp_d1d2_exchange(wlp, neighbor, NULL, NULL); -} - - -/** - * Each neighbor in the neighborhood cache is discoverable. Discover it. - * - * Discovery is done through sending of D1 association frame and parsing - * the D2 association frame response. Only wssid from D2 will be included - * in neighbor cache, rest is just displayed to user and forgotten. - * - * The discovery is not done in parallel. This is simple and enables us to - * maintain only one association context. - * - * The discovery of one neighbor does not affect the other, but if the - * discovery of a neighbor fails it is removed from the neighborhood cache. - */ -static -int wlp_discover_all_neighbors(struct wlp *wlp) -{ - int result = 0; - struct device *dev = &wlp->rc->uwb_dev.dev; - struct wlp_neighbor_e *neighbor, *next; - - list_for_each_entry_safe(neighbor, next, &wlp->neighbors, node) { - result = wlp_discover_neighbor(wlp, neighbor); - if (result < 0) { - dev_err(dev, "WLP: Unable to discover neighbor " - "%02x:%02x, removing from neighborhood. \n", - neighbor->uwb_dev->dev_addr.data[1], - neighbor->uwb_dev->dev_addr.data[0]); - __wlp_neighbor_release(neighbor); - } - } - return result; -} - -static int wlp_add_neighbor_helper(struct device *dev, void *priv) -{ - struct wlp *wlp = priv; - struct uwb_dev *uwb_dev = to_uwb_dev(dev); - - return wlp_add_neighbor(wlp, uwb_dev); -} - -/** - * Discover WLP neighborhood - * - * Will send D1 association frame to all devices in beacon group that have - * discoverable bit set in WLP IE. D2 frames will be received, information - * displayed to user in @buf. Partial information (from D2 association - * frame) will be cached to assist with future association - * requests. - * - * The discovery of the WLP neighborhood is triggered by the user. This - * should occur infrequently and we thus free current cache and re-allocate - * memory if needed. - * - * If one neighbor fails during initial discovery (determining if it is a - * neighbor or not), we fail all - note that interaction with neighbor has - * not occured at this point so if a failure occurs we know something went wrong - * locally. We thus undo everything. - */ -ssize_t wlp_discover(struct wlp *wlp) -{ - int result = 0; - struct device *dev = &wlp->rc->uwb_dev.dev; - - mutex_lock(&wlp->nbmutex); - /* Clear current neighborhood cache. */ - __wlp_neighbors_release(wlp); - /* Determine which devices in neighborhood. Repopulate cache. */ - result = uwb_dev_for_each(wlp->rc, wlp_add_neighbor_helper, wlp); - if (result < 0) { - /* May have partial neighbor information, release all. */ - __wlp_neighbors_release(wlp); - goto error_dev_for_each; - } - /* Discover the properties of devices in neighborhood. */ - result = wlp_discover_all_neighbors(wlp); - /* In case of failure we still print our partial results. */ - if (result < 0) { - dev_err(dev, "Unable to fully discover neighborhood. \n"); - result = 0; - } -error_dev_for_each: - mutex_unlock(&wlp->nbmutex); - return result; -} - -/** - * Handle events from UWB stack - * - * We handle events conservatively. If a neighbor goes off the air we - * remove it from the neighborhood. If an association process is in - * progress this function will block waiting for the nbmutex to become - * free. The association process will thus be allowed to complete before it - * is removed. - */ -static -void wlp_uwb_notifs_cb(void *_wlp, struct uwb_dev *uwb_dev, - enum uwb_notifs event) -{ - struct wlp *wlp = _wlp; - struct device *dev = &wlp->rc->uwb_dev.dev; - struct wlp_neighbor_e *neighbor, *next; - int result; - switch (event) { - case UWB_NOTIF_ONAIR: - result = wlp_eda_create_node(&wlp->eda, - uwb_dev->mac_addr.data, - &uwb_dev->dev_addr); - if (result < 0) - dev_err(dev, "WLP: Unable to add new neighbor " - "%02x:%02x to EDA cache.\n", - uwb_dev->dev_addr.data[1], - uwb_dev->dev_addr.data[0]); - break; - case UWB_NOTIF_OFFAIR: - wlp_eda_rm_node(&wlp->eda, &uwb_dev->dev_addr); - mutex_lock(&wlp->nbmutex); - list_for_each_entry_safe(neighbor, next, &wlp->neighbors, node) { - if (neighbor->uwb_dev == uwb_dev) - __wlp_neighbor_release(neighbor); - } - mutex_unlock(&wlp->nbmutex); - break; - default: - dev_err(dev, "don't know how to handle event %d from uwb\n", - event); - } -} - -static void wlp_channel_changed(struct uwb_pal *pal, int channel) -{ - struct wlp *wlp = container_of(pal, struct wlp, pal); - - if (channel < 0) - netif_carrier_off(wlp->ndev); - else - netif_carrier_on(wlp->ndev); -} - -int wlp_setup(struct wlp *wlp, struct uwb_rc *rc, struct net_device *ndev) -{ - int result; - - BUG_ON(wlp->fill_device_info == NULL); - BUG_ON(wlp->xmit_frame == NULL); - BUG_ON(wlp->stop_queue == NULL); - BUG_ON(wlp->start_queue == NULL); - - wlp->rc = rc; - wlp->ndev = ndev; - wlp_eda_init(&wlp->eda);/* Set up address cache */ - wlp->uwb_notifs_handler.cb = wlp_uwb_notifs_cb; - wlp->uwb_notifs_handler.data = wlp; - uwb_notifs_register(rc, &wlp->uwb_notifs_handler); - - uwb_pal_init(&wlp->pal); - wlp->pal.rc = rc; - wlp->pal.channel_changed = wlp_channel_changed; - result = uwb_pal_register(&wlp->pal); - if (result < 0) - uwb_notifs_deregister(wlp->rc, &wlp->uwb_notifs_handler); - - return result; -} -EXPORT_SYMBOL_GPL(wlp_setup); - -void wlp_remove(struct wlp *wlp) -{ - wlp_neighbors_release(wlp); - uwb_pal_unregister(&wlp->pal); - uwb_notifs_deregister(wlp->rc, &wlp->uwb_notifs_handler); - wlp_eda_release(&wlp->eda); - mutex_lock(&wlp->mutex); - if (wlp->dev_info != NULL) - kfree(wlp->dev_info); - mutex_unlock(&wlp->mutex); - wlp->rc = NULL; -} -EXPORT_SYMBOL_GPL(wlp_remove); - -/** - * wlp_reset_all - reset the WLP hardware - * @wlp: the WLP device to reset. - * - * This schedules a full hardware reset of the WLP device. The radio - * controller and any other PALs will also be reset. - */ -void wlp_reset_all(struct wlp *wlp) -{ - uwb_rc_reset_all(wlp->rc); -} -EXPORT_SYMBOL_GPL(wlp_reset_all); diff --git a/drivers/uwb/wlp/wss-lc.c b/drivers/uwb/wlp/wss-lc.c deleted file mode 100644 index 67872c83b679..000000000000 --- a/drivers/uwb/wlp/wss-lc.c +++ /dev/null @@ -1,959 +0,0 @@ -/* - * WiMedia Logical Link Control Protocol (WLP) - * - * Copyright (C) 2007 Intel Corporation - * Reinette Chatre <reinette.chatre@intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - * - * Implementation of the WLP association protocol. - * - * FIXME: Docs - * - * A UWB network interface will configure a WSS through wlp_wss_setup() after - * the interface has been assigned a MAC address, typically after - * "ifconfig" has been called. When the interface goes down it should call - * wlp_wss_remove(). - * - * When the WSS is ready for use the user interacts via sysfs to create, - * discover, and activate WSS. - * - * wlp_wss_enroll_activate() - * - * wlp_wss_create_activate() - * wlp_wss_set_wssid_hash() - * wlp_wss_comp_wssid_hash() - * wlp_wss_sel_bcast_addr() - * wlp_wss_sysfs_add() - * - * Called when no more references to WSS exist: - * wlp_wss_release() - * wlp_wss_reset() - */ -#include <linux/etherdevice.h> /* for is_valid_ether_addr */ -#include <linux/skbuff.h> -#include <linux/slab.h> -#include <linux/wlp.h> - -#include "wlp-internal.h" - -size_t wlp_wss_key_print(char *buf, size_t bufsize, u8 *key) -{ - size_t result; - - result = scnprintf(buf, bufsize, - "%02x %02x %02x %02x %02x %02x " - "%02x %02x %02x %02x %02x %02x " - "%02x %02x %02x %02x", - key[0], key[1], key[2], key[3], - key[4], key[5], key[6], key[7], - key[8], key[9], key[10], key[11], - key[12], key[13], key[14], key[15]); - return result; -} - -/** - * Compute WSSID hash - * WLP Draft 0.99 [7.2.1] - * - * The WSSID hash for a WSSID is the result of an octet-wise exclusive-OR - * of all octets in the WSSID. - */ -static -u8 wlp_wss_comp_wssid_hash(struct wlp_uuid *wssid) -{ - return wssid->data[0] ^ wssid->data[1] ^ wssid->data[2] - ^ wssid->data[3] ^ wssid->data[4] ^ wssid->data[5] - ^ wssid->data[6] ^ wssid->data[7] ^ wssid->data[8] - ^ wssid->data[9] ^ wssid->data[10] ^ wssid->data[11] - ^ wssid->data[12] ^ wssid->data[13] ^ wssid->data[14] - ^ wssid->data[15]; -} - -/** - * Select a multicast EUI-48 for the WSS broadcast address. - * WLP Draft 0.99 [7.2.1] - * - * Selected based on the WiMedia Alliance OUI, 00-13-88, within the WLP - * range, [01-13-88-00-01-00, 01-13-88-00-01-FF] inclusive. - * - * This address is currently hardcoded. - * FIXME? - */ -static -struct uwb_mac_addr wlp_wss_sel_bcast_addr(struct wlp_wss *wss) -{ - struct uwb_mac_addr bcast = { - .data = { 0x01, 0x13, 0x88, 0x00, 0x01, 0x00 } - }; - return bcast; -} - -/** - * Clear the contents of the WSS structure - all except kobj, mutex, virtual - * - * We do not want to reinitialize - the internal kobj should not change as - * it still points to the parent received during setup. The mutex should - * remain also. We thus just reset values individually. - * The virutal address assigned to WSS will remain the same for the - * lifetime of the WSS. We only reset the fields that can change during its - * lifetime. - */ -void wlp_wss_reset(struct wlp_wss *wss) -{ - memset(&wss->wssid, 0, sizeof(wss->wssid)); - wss->hash = 0; - memset(&wss->name[0], 0, sizeof(wss->name)); - memset(&wss->bcast, 0, sizeof(wss->bcast)); - wss->secure_status = WLP_WSS_UNSECURE; - memset(&wss->master_key[0], 0, sizeof(wss->master_key)); - wss->tag = 0; - wss->state = WLP_WSS_STATE_NONE; -} - -/** - * Create sysfs infrastructure for WSS - * - * The WSS is configured to have the interface as parent (see wlp_wss_setup()) - * a new sysfs directory that includes wssid as its name is created in the - * interface's sysfs directory. The group of files interacting with WSS are - * created also. - */ -static -int wlp_wss_sysfs_add(struct wlp_wss *wss, char *wssid_str) -{ - struct wlp *wlp = container_of(wss, struct wlp, wss); - struct device *dev = &wlp->rc->uwb_dev.dev; - int result; - - result = kobject_set_name(&wss->kobj, "wss-%s", wssid_str); - if (result < 0) - return result; - wss->kobj.ktype = &wss_ktype; - result = kobject_init_and_add(&wss->kobj, - &wss_ktype, wss->kobj.parent, "wlp"); - if (result < 0) { - dev_err(dev, "WLP: Cannot register WSS kobject.\n"); - goto error_kobject_register; - } - result = sysfs_create_group(&wss->kobj, &wss_attr_group); - if (result < 0) { - dev_err(dev, "WLP: Cannot register WSS attributes: %d\n", - result); - goto error_sysfs_create_group; - } - return 0; -error_sysfs_create_group: - - kobject_put(&wss->kobj); /* will free name if needed */ - return result; -error_kobject_register: - kfree(wss->kobj.name); - wss->kobj.name = NULL; - wss->kobj.ktype = NULL; - return result; -} - - -/** - * Release WSS - * - * No more references exist to this WSS. We should undo everything that was - * done in wlp_wss_create_activate() except removing the group. The group - * is not removed because an object can be unregistered before the group is - * created. We also undo any additional operations on the WSS after this - * (addition of members). - * - * If memory was allocated for the kobject's name then it will - * be freed by the kobject system during this time. - * - * The EDA cache is removed and reinitialized when the WSS is removed. We - * thus loose knowledge of members of this WSS at that time and need not do - * it here. - */ -void wlp_wss_release(struct kobject *kobj) -{ - struct wlp_wss *wss = container_of(kobj, struct wlp_wss, kobj); - - wlp_wss_reset(wss); -} - -/** - * Enroll into a WSS using provided neighbor as registrar - * - * First search the neighborhood information to learn which neighbor is - * referred to, next proceed with enrollment. - * - * &wss->mutex is held - */ -static -int wlp_wss_enroll_target(struct wlp_wss *wss, struct wlp_uuid *wssid, - struct uwb_dev_addr *dest) -{ - struct wlp *wlp = container_of(wss, struct wlp, wss); - struct device *dev = &wlp->rc->uwb_dev.dev; - struct wlp_neighbor_e *neighbor; - int result = -ENXIO; - struct uwb_dev_addr *dev_addr; - - mutex_lock(&wlp->nbmutex); - list_for_each_entry(neighbor, &wlp->neighbors, node) { - dev_addr = &neighbor->uwb_dev->dev_addr; - if (!memcmp(dest, dev_addr, sizeof(*dest))) { - result = wlp_enroll_neighbor(wlp, neighbor, wss, wssid); - break; - } - } - if (result == -ENXIO) - dev_err(dev, "WLP: Cannot find neighbor %02x:%02x. \n", - dest->data[1], dest->data[0]); - mutex_unlock(&wlp->nbmutex); - return result; -} - -/** - * Enroll into a WSS previously discovered - * - * User provides WSSID of WSS, search for neighbor that has this WSS - * activated and attempt to enroll. - * - * &wss->mutex is held - */ -static -int wlp_wss_enroll_discovered(struct wlp_wss *wss, struct wlp_uuid *wssid) -{ - struct wlp *wlp = container_of(wss, struct wlp, wss); - struct device *dev = &wlp->rc->uwb_dev.dev; - struct wlp_neighbor_e *neighbor; - struct wlp_wssid_e *wssid_e; - char buf[WLP_WSS_UUID_STRSIZE]; - int result = -ENXIO; - - - mutex_lock(&wlp->nbmutex); - list_for_each_entry(neighbor, &wlp->neighbors, node) { - list_for_each_entry(wssid_e, &neighbor->wssid, node) { - if (!memcmp(wssid, &wssid_e->wssid, sizeof(*wssid))) { - result = wlp_enroll_neighbor(wlp, neighbor, - wss, wssid); - if (result == 0) /* enrollment success */ - goto out; - break; - } - } - } -out: - if (result == -ENXIO) { - wlp_wss_uuid_print(buf, sizeof(buf), wssid); - dev_err(dev, "WLP: Cannot find WSSID %s in cache. \n", buf); - } - mutex_unlock(&wlp->nbmutex); - return result; -} - -/** - * Enroll into WSS with provided WSSID, registrar may be provided - * - * @wss: out WSS that will be enrolled - * @wssid: wssid of neighboring WSS that we want to enroll in - * @devaddr: registrar can be specified, will be broadcast (ff:ff) if any - * neighbor can be used as registrar. - * - * &wss->mutex is held - */ -static -int wlp_wss_enroll(struct wlp_wss *wss, struct wlp_uuid *wssid, - struct uwb_dev_addr *devaddr) -{ - int result; - struct wlp *wlp = container_of(wss, struct wlp, wss); - struct device *dev = &wlp->rc->uwb_dev.dev; - char buf[WLP_WSS_UUID_STRSIZE]; - struct uwb_dev_addr bcast = {.data = {0xff, 0xff} }; - - wlp_wss_uuid_print(buf, sizeof(buf), wssid); - - if (wss->state != WLP_WSS_STATE_NONE) { - dev_err(dev, "WLP: Already enrolled in WSS %s.\n", buf); - result = -EEXIST; - goto error; - } - if (!memcmp(&bcast, devaddr, sizeof(bcast))) - result = wlp_wss_enroll_discovered(wss, wssid); - else - result = wlp_wss_enroll_target(wss, wssid, devaddr); - if (result < 0) { - dev_err(dev, "WLP: Unable to enroll into WSS %s, result %d \n", - buf, result); - goto error; - } - dev_dbg(dev, "Successfully enrolled into WSS %s \n", buf); - result = wlp_wss_sysfs_add(wss, buf); - if (result < 0) { - dev_err(dev, "WLP: Unable to set up sysfs for WSS kobject.\n"); - wlp_wss_reset(wss); - } -error: - return result; - -} - -/** - * Activate given WSS - * - * Prior to activation a WSS must be enrolled. To activate a WSS a device - * includes the WSS hash in the WLP IE in its beacon in each superframe. - * WLP 0.99 [7.2.5]. - * - * The WSS tag is also computed at this time. We only support one activated - * WSS so we can use the hash as a tag - there will never be a conflict. - * - * We currently only support one activated WSS so only one WSS hash is - * included in the WLP IE. - */ -static -int wlp_wss_activate(struct wlp_wss *wss) -{ - struct wlp *wlp = container_of(wss, struct wlp, wss); - struct device *dev = &wlp->rc->uwb_dev.dev; - struct uwb_rc *uwb_rc = wlp->rc; - int result; - struct { - struct wlp_ie wlp_ie; - u8 hash; /* only include one hash */ - } ie_data; - - BUG_ON(wss->state != WLP_WSS_STATE_ENROLLED); - wss->hash = wlp_wss_comp_wssid_hash(&wss->wssid); - wss->tag = wss->hash; - memset(&ie_data, 0, sizeof(ie_data)); - ie_data.wlp_ie.hdr.element_id = UWB_IE_WLP; - ie_data.wlp_ie.hdr.length = sizeof(ie_data) - sizeof(struct uwb_ie_hdr); - wlp_ie_set_hash_length(&ie_data.wlp_ie, sizeof(ie_data.hash)); - ie_data.hash = wss->hash; - result = uwb_rc_ie_add(uwb_rc, &ie_data.wlp_ie.hdr, - sizeof(ie_data)); - if (result < 0) { - dev_err(dev, "WLP: Unable to add WLP IE to beacon. " - "result = %d.\n", result); - goto error_wlp_ie; - } - wss->state = WLP_WSS_STATE_ACTIVE; - result = 0; -error_wlp_ie: - return result; -} - -/** - * Enroll in and activate WSS identified by provided WSSID - * - * The neighborhood cache should contain a list of all neighbors and the - * WSS they have activated. Based on that cache we search which neighbor we - * can perform the association process with. The user also has option to - * specify which neighbor it prefers as registrar. - * Successful enrollment is followed by activation. - * Successful activation will create the sysfs directory containing - * specific information regarding this WSS. - */ -int wlp_wss_enroll_activate(struct wlp_wss *wss, struct wlp_uuid *wssid, - struct uwb_dev_addr *devaddr) -{ - struct wlp *wlp = container_of(wss, struct wlp, wss); - struct device *dev = &wlp->rc->uwb_dev.dev; - int result = 0; - char buf[WLP_WSS_UUID_STRSIZE]; - - mutex_lock(&wss->mutex); - result = wlp_wss_enroll(wss, wssid, devaddr); - if (result < 0) { - wlp_wss_uuid_print(buf, sizeof(buf), &wss->wssid); - dev_err(dev, "WLP: Enrollment into WSS %s failed.\n", buf); - goto error_enroll; - } - result = wlp_wss_activate(wss); - if (result < 0) { - dev_err(dev, "WLP: Unable to activate WSS. Undoing enrollment " - "result = %d \n", result); - /* Undo enrollment */ - wlp_wss_reset(wss); - goto error_activate; - } -error_activate: -error_enroll: - mutex_unlock(&wss->mutex); - return result; -} - -/** - * Create, enroll, and activate a new WSS - * - * @wssid: new wssid provided by user - * @name: WSS name requested by used. - * @sec_status: security status requested by user - * - * A user requested the creation of a new WSS. All operations are done - * locally. The new WSS will be stored locally, the hash will be included - * in the WLP IE, and the sysfs infrastructure for this WSS will be - * created. - */ -int wlp_wss_create_activate(struct wlp_wss *wss, struct wlp_uuid *wssid, - char *name, unsigned sec_status, unsigned accept) -{ - struct wlp *wlp = container_of(wss, struct wlp, wss); - struct device *dev = &wlp->rc->uwb_dev.dev; - int result = 0; - char buf[WLP_WSS_UUID_STRSIZE]; - - result = wlp_wss_uuid_print(buf, sizeof(buf), wssid); - - if (!mutex_trylock(&wss->mutex)) { - dev_err(dev, "WLP: WLP association session in progress.\n"); - return -EBUSY; - } - if (wss->state != WLP_WSS_STATE_NONE) { - dev_err(dev, "WLP: WSS already exists. Not creating new.\n"); - result = -EEXIST; - goto out; - } - if (wss->kobj.parent == NULL) { - dev_err(dev, "WLP: WSS parent not ready. Is network interface " - "up?\n"); - result = -ENXIO; - goto out; - } - if (sec_status == WLP_WSS_SECURE) { - dev_err(dev, "WLP: FIXME Creation of secure WSS not " - "supported yet.\n"); - result = -EINVAL; - goto out; - } - wss->wssid = *wssid; - memcpy(wss->name, name, sizeof(wss->name)); - wss->bcast = wlp_wss_sel_bcast_addr(wss); - wss->secure_status = sec_status; - wss->accept_enroll = accept; - /*wss->virtual_addr is initialized in call to wlp_wss_setup*/ - /* sysfs infrastructure */ - result = wlp_wss_sysfs_add(wss, buf); - if (result < 0) { - dev_err(dev, "Cannot set up sysfs for WSS kobject.\n"); - wlp_wss_reset(wss); - goto out; - } else - result = 0; - wss->state = WLP_WSS_STATE_ENROLLED; - result = wlp_wss_activate(wss); - if (result < 0) { - dev_err(dev, "WLP: Unable to activate WSS. Undoing " - "enrollment\n"); - wlp_wss_reset(wss); - goto out; - } - result = 0; -out: - mutex_unlock(&wss->mutex); - return result; -} - -/** - * Determine if neighbor has WSS activated - * - * @returns: 1 if neighbor has WSS activated, zero otherwise - * - * This can be done in two ways: - * - send a C1 frame, parse C2/F0 response - * - examine the WLP IE sent by the neighbor - * - * The WLP IE is not fully supported in hardware so we use the C1/C2 frame - * exchange to determine if a WSS is activated. Using the WLP IE should be - * faster and should be used when it becomes possible. - */ -int wlp_wss_is_active(struct wlp *wlp, struct wlp_wss *wss, - struct uwb_dev_addr *dev_addr) -{ - int result = 0; - struct device *dev = &wlp->rc->uwb_dev.dev; - DECLARE_COMPLETION_ONSTACK(completion); - struct wlp_session session; - struct sk_buff *skb; - struct wlp_frame_assoc *resp; - struct wlp_uuid wssid; - - mutex_lock(&wlp->mutex); - /* Send C1 association frame */ - result = wlp_send_assoc_frame(wlp, wss, dev_addr, WLP_ASSOC_C1); - if (result < 0) { - dev_err(dev, "Unable to send C1 frame to neighbor " - "%02x:%02x (%d)\n", dev_addr->data[1], - dev_addr->data[0], result); - result = 0; - goto out; - } - /* Create session, wait for response */ - session.exp_message = WLP_ASSOC_C2; - session.cb = wlp_session_cb; - session.cb_priv = &completion; - session.neighbor_addr = *dev_addr; - BUG_ON(wlp->session != NULL); - wlp->session = &session; - /* Wait for C2/F0 frame */ - result = wait_for_completion_interruptible_timeout(&completion, - WLP_PER_MSG_TIMEOUT * HZ); - if (result == 0) { - dev_err(dev, "Timeout while sending C1 to neighbor " - "%02x:%02x.\n", dev_addr->data[1], - dev_addr->data[0]); - goto out; - } - if (result < 0) { - dev_err(dev, "Unable to send C1 to neighbor %02x:%02x.\n", - dev_addr->data[1], dev_addr->data[0]); - result = 0; - goto out; - } - /* Parse message in session->data: it will be either C2 or F0 */ - skb = session.data; - resp = (void *) skb->data; - if (resp->type == WLP_ASSOC_F0) { - result = wlp_parse_f0(wlp, skb); - if (result < 0) - dev_err(dev, "WLP: unable to parse incoming F0 " - "frame from neighbor %02x:%02x.\n", - dev_addr->data[1], dev_addr->data[0]); - result = 0; - goto error_resp_parse; - } - /* WLP version and message type fields have already been parsed */ - result = wlp_get_wssid(wlp, (void *)resp + sizeof(*resp), &wssid, - skb->len - sizeof(*resp)); - if (result < 0) { - dev_err(dev, "WLP: unable to obtain WSSID from C2 frame.\n"); - result = 0; - goto error_resp_parse; - } - if (!memcmp(&wssid, &wss->wssid, sizeof(wssid))) - result = 1; - else { - dev_err(dev, "WLP: Received a C2 frame without matching " - "WSSID.\n"); - result = 0; - } -error_resp_parse: - kfree_skb(skb); -out: - wlp->session = NULL; - mutex_unlock(&wlp->mutex); - return result; -} - -/** - * Activate connection with neighbor by updating EDA cache - * - * @wss: local WSS to which neighbor wants to connect - * @dev_addr: neighbor's address - * @wssid: neighbor's WSSID - must be same as our WSS's WSSID - * @tag: neighbor's WSS tag used to identify frames transmitted by it - * @virt_addr: neighbor's virtual EUI-48 - */ -static -int wlp_wss_activate_connection(struct wlp *wlp, struct wlp_wss *wss, - struct uwb_dev_addr *dev_addr, - struct wlp_uuid *wssid, u8 *tag, - struct uwb_mac_addr *virt_addr) -{ - struct device *dev = &wlp->rc->uwb_dev.dev; - int result = 0; - - if (!memcmp(wssid, &wss->wssid, sizeof(*wssid))) { - /* Update EDA cache */ - result = wlp_eda_update_node(&wlp->eda, dev_addr, wss, - (void *) virt_addr->data, *tag, - WLP_WSS_CONNECTED); - if (result < 0) - dev_err(dev, "WLP: Unable to update EDA cache " - "with new connected neighbor information.\n"); - } else { - dev_err(dev, "WLP: Neighbor does not have matching WSSID.\n"); - result = -EINVAL; - } - return result; -} - -/** - * Connect to WSS neighbor - * - * Use C3/C4 exchange to determine if neighbor has WSS activated and - * retrieve the WSS tag and virtual EUI-48 of the neighbor. - */ -static -int wlp_wss_connect_neighbor(struct wlp *wlp, struct wlp_wss *wss, - struct uwb_dev_addr *dev_addr) -{ - int result; - struct device *dev = &wlp->rc->uwb_dev.dev; - struct wlp_uuid wssid; - u8 tag; - struct uwb_mac_addr virt_addr; - DECLARE_COMPLETION_ONSTACK(completion); - struct wlp_session session; - struct wlp_frame_assoc *resp; - struct sk_buff *skb; - - mutex_lock(&wlp->mutex); - /* Send C3 association frame */ - result = wlp_send_assoc_frame(wlp, wss, dev_addr, WLP_ASSOC_C3); - if (result < 0) { - dev_err(dev, "Unable to send C3 frame to neighbor " - "%02x:%02x (%d)\n", dev_addr->data[1], - dev_addr->data[0], result); - goto out; - } - /* Create session, wait for response */ - session.exp_message = WLP_ASSOC_C4; - session.cb = wlp_session_cb; - session.cb_priv = &completion; - session.neighbor_addr = *dev_addr; - BUG_ON(wlp->session != NULL); - wlp->session = &session; - /* Wait for C4/F0 frame */ - result = wait_for_completion_interruptible_timeout(&completion, - WLP_PER_MSG_TIMEOUT * HZ); - if (result == 0) { - dev_err(dev, "Timeout while sending C3 to neighbor " - "%02x:%02x.\n", dev_addr->data[1], - dev_addr->data[0]); - result = -ETIMEDOUT; - goto out; - } - if (result < 0) { - dev_err(dev, "Unable to send C3 to neighbor %02x:%02x.\n", - dev_addr->data[1], dev_addr->data[0]); - goto out; - } - /* Parse message in session->data: it will be either C4 or F0 */ - skb = session.data; - resp = (void *) skb->data; - if (resp->type == WLP_ASSOC_F0) { - result = wlp_parse_f0(wlp, skb); - if (result < 0) - dev_err(dev, "WLP: unable to parse incoming F0 " - "frame from neighbor %02x:%02x.\n", - dev_addr->data[1], dev_addr->data[0]); - result = -EINVAL; - goto error_resp_parse; - } - result = wlp_parse_c3c4_frame(wlp, skb, &wssid, &tag, &virt_addr); - if (result < 0) { - dev_err(dev, "WLP: Unable to parse C4 frame from neighbor.\n"); - goto error_resp_parse; - } - result = wlp_wss_activate_connection(wlp, wss, dev_addr, &wssid, &tag, - &virt_addr); - if (result < 0) { - dev_err(dev, "WLP: Unable to activate connection to " - "neighbor %02x:%02x.\n", dev_addr->data[1], - dev_addr->data[0]); - goto error_resp_parse; - } -error_resp_parse: - kfree_skb(skb); -out: - /* Record that we unsuccessfully tried to connect to this neighbor */ - if (result < 0) - wlp_eda_update_node_state(&wlp->eda, dev_addr, - WLP_WSS_CONNECT_FAILED); - wlp->session = NULL; - mutex_unlock(&wlp->mutex); - return result; -} - -/** - * Connect to neighbor with common WSS, send pending frame - * - * This function is scheduled when a frame is destined to a neighbor with - * which we do not have a connection. A copy of the EDA cache entry is - * provided - not the actual cache entry (because it is protected by a - * spinlock). - * - * First determine if neighbor has the same WSS activated, connect if it - * does. The C3/C4 exchange is dual purpose to determine if neighbor has - * WSS activated and proceed with the connection. - * - * The frame that triggered the connection setup is sent after connection - * setup. - * - * network queue is stopped - we need to restart when done - * - */ -static -void wlp_wss_connect_send(struct work_struct *ws) -{ - struct wlp_assoc_conn_ctx *conn_ctx = container_of(ws, - struct wlp_assoc_conn_ctx, - ws); - struct wlp *wlp = conn_ctx->wlp; - struct sk_buff *skb = conn_ctx->skb; - struct wlp_eda_node *eda_entry = &conn_ctx->eda_entry; - struct uwb_dev_addr *dev_addr = &eda_entry->dev_addr; - struct wlp_wss *wss = &wlp->wss; - int result; - struct device *dev = &wlp->rc->uwb_dev.dev; - - mutex_lock(&wss->mutex); - if (wss->state < WLP_WSS_STATE_ACTIVE) { - if (printk_ratelimit()) - dev_err(dev, "WLP: Attempting to connect with " - "WSS that is not active or connected.\n"); - dev_kfree_skb(skb); - goto out; - } - /* Establish connection - send C3 rcv C4 */ - result = wlp_wss_connect_neighbor(wlp, wss, dev_addr); - if (result < 0) { - if (printk_ratelimit()) - dev_err(dev, "WLP: Unable to establish connection " - "with neighbor %02x:%02x.\n", - dev_addr->data[1], dev_addr->data[0]); - dev_kfree_skb(skb); - goto out; - } - /* EDA entry changed, update the local copy being used */ - result = wlp_copy_eda_node(&wlp->eda, dev_addr, eda_entry); - if (result < 0) { - if (printk_ratelimit()) - dev_err(dev, "WLP: Cannot find EDA entry for " - "neighbor %02x:%02x \n", - dev_addr->data[1], dev_addr->data[0]); - } - result = wlp_wss_prep_hdr(wlp, eda_entry, skb); - if (result < 0) { - if (printk_ratelimit()) - dev_err(dev, "WLP: Unable to prepare frame header for " - "transmission (neighbor %02x:%02x). \n", - dev_addr->data[1], dev_addr->data[0]); - dev_kfree_skb(skb); - goto out; - } - BUG_ON(wlp->xmit_frame == NULL); - result = wlp->xmit_frame(wlp, skb, dev_addr); - if (result < 0) { - if (printk_ratelimit()) - dev_err(dev, "WLP: Unable to transmit frame: %d\n", - result); - if (result == -ENXIO) - dev_err(dev, "WLP: Is network interface up? \n"); - /* We could try again ... */ - dev_kfree_skb(skb);/*we need to free if tx fails */ - } -out: - kfree(conn_ctx); - BUG_ON(wlp->start_queue == NULL); - wlp->start_queue(wlp); - mutex_unlock(&wss->mutex); -} - -/** - * Add WLP header to outgoing skb - * - * @eda_entry: pointer to neighbor's entry in the EDA cache - * @_skb: skb containing data destined to the neighbor - */ -int wlp_wss_prep_hdr(struct wlp *wlp, struct wlp_eda_node *eda_entry, - void *_skb) -{ - struct device *dev = &wlp->rc->uwb_dev.dev; - int result = 0; - unsigned char *eth_addr = eda_entry->eth_addr; - struct uwb_dev_addr *dev_addr = &eda_entry->dev_addr; - struct sk_buff *skb = _skb; - struct wlp_frame_std_abbrv_hdr *std_hdr; - - if (eda_entry->state == WLP_WSS_CONNECTED) { - /* Add WLP header */ - BUG_ON(skb_headroom(skb) < sizeof(*std_hdr)); - std_hdr = (void *) __skb_push(skb, sizeof(*std_hdr)); - std_hdr->hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID); - std_hdr->hdr.type = WLP_FRAME_STANDARD; - std_hdr->tag = eda_entry->wss->tag; - } else { - if (printk_ratelimit()) - dev_err(dev, "WLP: Destination neighbor (Ethernet: " - "%pM, Dev: %02x:%02x) is not connected.\n", - eth_addr, dev_addr->data[1], dev_addr->data[0]); - result = -EINVAL; - } - return result; -} - - -/** - * Prepare skb for neighbor: connect if not already and prep WLP header - * - * This function is called in interrupt context, but it needs to sleep. We - * temporarily stop the net queue to establish the WLP connection. - * Setup of the WLP connection and restart of queue is scheduled - * on the default work queue. - * - * run with eda->lock held (spinlock) - */ -int wlp_wss_connect_prep(struct wlp *wlp, struct wlp_eda_node *eda_entry, - void *_skb) -{ - int result = 0; - struct device *dev = &wlp->rc->uwb_dev.dev; - struct sk_buff *skb = _skb; - struct wlp_assoc_conn_ctx *conn_ctx; - - if (eda_entry->state == WLP_WSS_UNCONNECTED) { - /* We don't want any more packets while we set up connection */ - BUG_ON(wlp->stop_queue == NULL); - wlp->stop_queue(wlp); - conn_ctx = kmalloc(sizeof(*conn_ctx), GFP_ATOMIC); - if (conn_ctx == NULL) { - if (printk_ratelimit()) - dev_err(dev, "WLP: Unable to allocate memory " - "for connection handling.\n"); - result = -ENOMEM; - goto out; - } - conn_ctx->wlp = wlp; - conn_ctx->skb = skb; - conn_ctx->eda_entry = *eda_entry; - INIT_WORK(&conn_ctx->ws, wlp_wss_connect_send); - schedule_work(&conn_ctx->ws); - result = 1; - } else if (eda_entry->state == WLP_WSS_CONNECT_FAILED) { - /* Previous connection attempts failed, don't retry - see - * conditions for connection in WLP 0.99 [7.6.2] */ - if (printk_ratelimit()) - dev_err(dev, "Could not connect to neighbor " - "previously. Not retrying. \n"); - result = -ENONET; - goto out; - } else /* eda_entry->state == WLP_WSS_CONNECTED */ - result = wlp_wss_prep_hdr(wlp, eda_entry, skb); -out: - return result; -} - -/** - * Emulate broadcast: copy skb, send copy to neighbor (connect if not already) - * - * We need to copy skbs in the case where we emulate broadcast through - * unicast. We copy instead of clone because we are modifying the data of - * the frame after copying ... clones share data so we cannot emulate - * broadcast using clones. - * - * run with eda->lock held (spinlock) - */ -int wlp_wss_send_copy(struct wlp *wlp, struct wlp_eda_node *eda_entry, - void *_skb) -{ - int result = -ENOMEM; - struct device *dev = &wlp->rc->uwb_dev.dev; - struct sk_buff *skb = _skb; - struct sk_buff *copy; - struct uwb_dev_addr *dev_addr = &eda_entry->dev_addr; - - copy = skb_copy(skb, GFP_ATOMIC); - if (copy == NULL) { - if (printk_ratelimit()) - dev_err(dev, "WLP: Unable to copy skb for " - "transmission.\n"); - goto out; - } - result = wlp_wss_connect_prep(wlp, eda_entry, copy); - if (result < 0) { - if (printk_ratelimit()) - dev_err(dev, "WLP: Unable to connect/send skb " - "to neighbor.\n"); - dev_kfree_skb_irq(copy); - goto out; - } else if (result == 1) - /* Frame will be transmitted separately */ - goto out; - BUG_ON(wlp->xmit_frame == NULL); - result = wlp->xmit_frame(wlp, copy, dev_addr); - if (result < 0) { - if (printk_ratelimit()) - dev_err(dev, "WLP: Unable to transmit frame: %d\n", - result); - if ((result == -ENXIO) && printk_ratelimit()) - dev_err(dev, "WLP: Is network interface up? \n"); - /* We could try again ... */ - dev_kfree_skb_irq(copy);/*we need to free if tx fails */ - } -out: - return result; -} - - -/** - * Setup WSS - * - * Should be called by network driver after the interface has been given a - * MAC address. - */ -int wlp_wss_setup(struct net_device *net_dev, struct wlp_wss *wss) -{ - struct wlp *wlp = container_of(wss, struct wlp, wss); - struct device *dev = &wlp->rc->uwb_dev.dev; - int result = 0; - - mutex_lock(&wss->mutex); - wss->kobj.parent = &net_dev->dev.kobj; - if (!is_valid_ether_addr(net_dev->dev_addr)) { - dev_err(dev, "WLP: Invalid MAC address. Cannot use for" - "virtual.\n"); - result = -EINVAL; - goto out; - } - memcpy(wss->virtual_addr.data, net_dev->dev_addr, - sizeof(wss->virtual_addr.data)); -out: - mutex_unlock(&wss->mutex); - return result; -} -EXPORT_SYMBOL_GPL(wlp_wss_setup); - -/** - * Remove WSS - * - * Called by client that configured WSS through wlp_wss_setup(). This - * function is called when client no longer needs WSS, eg. client shuts - * down. - * - * We remove the WLP IE from the beacon before initiating local cleanup. - */ -void wlp_wss_remove(struct wlp_wss *wss) -{ - struct wlp *wlp = container_of(wss, struct wlp, wss); - - mutex_lock(&wss->mutex); - if (wss->state == WLP_WSS_STATE_ACTIVE) - uwb_rc_ie_rm(wlp->rc, UWB_IE_WLP); - if (wss->state != WLP_WSS_STATE_NONE) { - sysfs_remove_group(&wss->kobj, &wss_attr_group); - kobject_put(&wss->kobj); - } - wss->kobj.parent = NULL; - memset(&wss->virtual_addr, 0, sizeof(wss->virtual_addr)); - /* Cleanup EDA cache */ - wlp_eda_release(&wlp->eda); - wlp_eda_init(&wlp->eda); - mutex_unlock(&wss->mutex); -} -EXPORT_SYMBOL_GPL(wlp_wss_remove); diff --git a/include/linux/wlp.h b/include/linux/wlp.h deleted file mode 100644 index c76fe2392506..000000000000 --- a/include/linux/wlp.h +++ /dev/null @@ -1,736 +0,0 @@ -/* - * WiMedia Logical Link Control Protocol (WLP) - * - * Copyright (C) 2005-2006 Intel Corporation - * Reinette Chatre <reinette.chatre@intel.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - * - * FIXME: docs - * - * - Does not (yet) include support for WLP control frames - * WLP Draft 0.99 [6.5]. - * - * A visual representation of the data structures. - * - * wssidB wssidB - * ^ ^ - * | | - * wssidA wssidA - * wlp interface { ^ ^ - * ... | | - * ... ... wssid wssid ... - * wlp --- ... | | - * }; neighbors --> neighbA --> neighbB - * ... - * wss - * ... - * eda cache --> neighborA --> neighborB --> neighborC ... - */ - -#ifndef __LINUX__WLP_H_ -#define __LINUX__WLP_H_ - -#include <linux/netdevice.h> -#include <linux/skbuff.h> -#include <linux/list.h> -#include <linux/uwb.h> - -/** - * WLP Protocol ID - * WLP Draft 0.99 [6.2] - * - * The MUX header for all WLP frames - */ -#define WLP_PROTOCOL_ID 0x0100 - -/** - * WLP Version - * WLP version placed in the association frames (WLP 0.99 [6.6]) - */ -#define WLP_VERSION 0x10 - -/** - * Bytes needed to print UUID as string - */ -#define WLP_WSS_UUID_STRSIZE 48 - -/** - * Bytes needed to print nonce as string - */ -#define WLP_WSS_NONCE_STRSIZE 48 - - -/** - * Size used for WLP name size - * - * The WSS name is set to 65 bytes, 1 byte larger than the maximum - * allowed by the WLP spec. This is to have a null terminated string - * for display to the user. A maximum of 64 bytes will still be used - * when placing the WSS name field in association frames. - */ -#define WLP_WSS_NAME_SIZE 65 - -/** - * Number of bytes added by WLP to data frame - * - * A data frame transmitted from a host will be placed in a Standard or - * Abbreviated WLP frame. These have an extra 4 bytes of header (struct - * wlp_frame_std_abbrv_hdr). - * When the stack sends this data frame for transmission it needs to ensure - * there is enough headroom for this header. - */ -#define WLP_DATA_HLEN 4 - -/** - * State of device regarding WLP Service Set - * - * WLP_WSS_STATE_NONE: the host does not participate in any WSS - * WLP_WSS_STATE_PART_ENROLLED: used as part of the enrollment sequence - * ("Partial Enroll"). This state is used to - * indicate the first part of enrollment that is - * unsecure. If the WSS is unsecure then the - * state will promptly go to WLP_WSS_STATE_ENROLLED, - * if the WSS is not secure then the enrollment - * procedure is a few more steps before we are - * enrolled. - * WLP_WSS_STATE_ENROLLED: the host is enrolled in a WSS - * WLP_WSS_STATE_ACTIVE: WSS is activated - * WLP_WSS_STATE_CONNECTED: host is connected to neighbor in WSS - * - */ -enum wlp_wss_state { - WLP_WSS_STATE_NONE = 0, - WLP_WSS_STATE_PART_ENROLLED, - WLP_WSS_STATE_ENROLLED, - WLP_WSS_STATE_ACTIVE, - WLP_WSS_STATE_CONNECTED, -}; - -/** - * WSS Secure status - * WLP 0.99 Table 6 - * - * Set to one if the WSS is secure, zero if it is not secure - */ -enum wlp_wss_sec_status { - WLP_WSS_UNSECURE = 0, - WLP_WSS_SECURE, -}; - -/** - * WLP frame type - * WLP Draft 0.99 [6.2 Table 1] - */ -enum wlp_frame_type { - WLP_FRAME_STANDARD = 0, - WLP_FRAME_ABBREVIATED, - WLP_FRAME_CONTROL, - WLP_FRAME_ASSOCIATION, -}; - -/** - * WLP Association Message Type - * WLP Draft 0.99 [6.6.1.2 Table 8] - */ -enum wlp_assoc_type { - WLP_ASSOC_D1 = 2, - WLP_ASSOC_D2 = 3, - WLP_ASSOC_M1 = 4, - WLP_ASSOC_M2 = 5, - WLP_ASSOC_M3 = 7, - WLP_ASSOC_M4 = 8, - WLP_ASSOC_M5 = 9, - WLP_ASSOC_M6 = 10, - WLP_ASSOC_M7 = 11, - WLP_ASSOC_M8 = 12, - WLP_ASSOC_F0 = 14, - WLP_ASSOC_E1 = 32, - WLP_ASSOC_E2 = 33, - WLP_ASSOC_C1 = 34, - WLP_ASSOC_C2 = 35, - WLP_ASSOC_C3 = 36, - WLP_ASSOC_C4 = 37, -}; - -/** - * WLP Attribute Type - * WLP Draft 0.99 [6.6.1 Table 6] - */ -enum wlp_attr_type { - WLP_ATTR_AUTH = 0x1005, /* Authenticator */ - WLP_ATTR_DEV_NAME = 0x1011, /* Device Name */ - WLP_ATTR_DEV_PWD_ID = 0x1012, /* Device Password ID */ - WLP_ATTR_E_HASH1 = 0x1014, /* E-Hash1 */ - WLP_ATTR_E_HASH2 = 0x1015, /* E-Hash2 */ - WLP_ATTR_E_SNONCE1 = 0x1016, /* E-SNonce1 */ - WLP_ATTR_E_SNONCE2 = 0x1017, /* E-SNonce2 */ - WLP_ATTR_ENCR_SET = 0x1018, /* Encrypted Settings */ - WLP_ATTR_ENRL_NONCE = 0x101A, /* Enrollee Nonce */ - WLP_ATTR_KEYWRAP_AUTH = 0x101E, /* Key Wrap Authenticator */ - WLP_ATTR_MANUF = 0x1021, /* Manufacturer */ - WLP_ATTR_MSG_TYPE = 0x1022, /* Message Type */ - WLP_ATTR_MODEL_NAME = 0x1023, /* Model Name */ - WLP_ATTR_MODEL_NR = 0x1024, /* Model Number */ - WLP_ATTR_PUB_KEY = 0x1032, /* Public Key */ - WLP_ATTR_REG_NONCE = 0x1039, /* Registrar Nonce */ - WLP_ATTR_R_HASH1 = 0x103D, /* R-Hash1 */ - WLP_ATTR_R_HASH2 = 0x103E, /* R-Hash2 */ - WLP_ATTR_R_SNONCE1 = 0x103F, /* R-SNonce1 */ - WLP_ATTR_R_SNONCE2 = 0x1040, /* R-SNonce2 */ - WLP_ATTR_SERIAL = 0x1042, /* Serial number */ - WLP_ATTR_UUID_E = 0x1047, /* UUID-E */ - WLP_ATTR_UUID_R = 0x1048, /* UUID-R */ - WLP_ATTR_PRI_DEV_TYPE = 0x1054, /* Primary Device Type */ - WLP_ATTR_SEC_DEV_TYPE = 0x1055, /* Secondary Device Type */ - WLP_ATTR_PORT_DEV = 0x1056, /* Portable Device */ - WLP_ATTR_APP_EXT = 0x1058, /* Application Extension */ - WLP_ATTR_WLP_VER = 0x2000, /* WLP Version */ - WLP_ATTR_WSSID = 0x2001, /* WSSID */ - WLP_ATTR_WSS_NAME = 0x2002, /* WSS Name */ - WLP_ATTR_WSS_SEC_STAT = 0x2003, /* WSS Secure Status */ - WLP_ATTR_WSS_BCAST = 0x2004, /* WSS Broadcast Address */ - WLP_ATTR_WSS_M_KEY = 0x2005, /* WSS Master Key */ - WLP_ATTR_ACC_ENRL = 0x2006, /* Accepting Enrollment */ - WLP_ATTR_WSS_INFO = 0x2007, /* WSS Information */ - WLP_ATTR_WSS_SEL_MTHD = 0x2008, /* WSS Selection Method */ - WLP_ATTR_ASSC_MTHD_LIST = 0x2009, /* Association Methods List */ - WLP_ATTR_SEL_ASSC_MTHD = 0x200A, /* Selected Association Method */ - WLP_ATTR_ENRL_HASH_COMM = 0x200B, /* Enrollee Hash Commitment */ - WLP_ATTR_WSS_TAG = 0x200C, /* WSS Tag */ - WLP_ATTR_WSS_VIRT = 0x200D, /* WSS Virtual EUI-48 */ - WLP_ATTR_WLP_ASSC_ERR = 0x200E, /* WLP Association Error */ - WLP_ATTR_VNDR_EXT = 0x200F, /* Vendor Extension */ -}; - -/** - * WLP Category ID of primary/secondary device - * WLP Draft 0.99 [6.6.1.8 Table 12] - */ -enum wlp_dev_category_id { - WLP_DEV_CAT_COMPUTER = 1, - WLP_DEV_CAT_INPUT, - WLP_DEV_CAT_PRINT_SCAN_FAX_COPIER, - WLP_DEV_CAT_CAMERA, - WLP_DEV_CAT_STORAGE, - WLP_DEV_CAT_INFRASTRUCTURE, - WLP_DEV_CAT_DISPLAY, - WLP_DEV_CAT_MULTIM, - WLP_DEV_CAT_GAMING, - WLP_DEV_CAT_TELEPHONE, - WLP_DEV_CAT_OTHER = 65535, -}; - -/** - * WLP WSS selection method - * WLP Draft 0.99 [6.6.1.6 Table 10] - */ -enum wlp_wss_sel_mthd { - WLP_WSS_ENRL_SELECT = 1, /* Enrollee selects */ - WLP_WSS_REG_SELECT, /* Registrar selects */ -}; - -/** - * WLP association error values - * WLP Draft 0.99 [6.6.1.5 Table 9] - */ -enum wlp_assc_error { - WLP_ASSOC_ERROR_NONE, - WLP_ASSOC_ERROR_AUTH, /* Authenticator Failure */ - WLP_ASSOC_ERROR_ROGUE, /* Rogue activity suspected */ - WLP_ASSOC_ERROR_BUSY, /* Device busy */ - WLP_ASSOC_ERROR_LOCK, /* Setup Locked */ - WLP_ASSOC_ERROR_NOT_READY, /* Registrar not ready */ - WLP_ASSOC_ERROR_INV, /* Invalid WSS selection */ - WLP_ASSOC_ERROR_MSG_TIME, /* Message timeout */ - WLP_ASSOC_ERROR_ENR_TIME, /* Enrollment session timeout */ - WLP_ASSOC_ERROR_PW, /* Device password invalid */ - WLP_ASSOC_ERROR_VER, /* Unsupported version */ - WLP_ASSOC_ERROR_INT, /* Internal error */ - WLP_ASSOC_ERROR_UNDEF, /* Undefined error */ - WLP_ASSOC_ERROR_NUM, /* Numeric comparison failure */ - WLP_ASSOC_ERROR_WAIT, /* Waiting for user input */ -}; - -/** - * WLP Parameters - * WLP 0.99 [7.7] - */ -enum wlp_parameters { - WLP_PER_MSG_TIMEOUT = 15, /* Seconds to wait for response to - association message. */ -}; - -/** - * WLP IE - * - * The WLP IE should be included in beacons by all devices. - * - * The driver can set only a few of the fields in this information element, - * most fields are managed by the device self. When the driver needs to set - * a field it will only provide values for the fields of interest, the rest - * will be filled with zeroes. The fields of interest are: - * - * Element ID - * Length - * Capabilities (only to include WSSID Hash list length) - * WSSID Hash List fields - * - * WLP 0.99 [6.7] - * - * Only the fields that will be used are detailed in this structure, rest - * are not detailed or marked as "notused". - */ -struct wlp_ie { - struct uwb_ie_hdr hdr; - __le16 capabilities; - __le16 cycle_param; - __le16 acw_anchor_addr; - u8 wssid_hash_list[]; -} __packed; - -static inline int wlp_ie_hash_length(struct wlp_ie *ie) -{ - return (le16_to_cpu(ie->capabilities) >> 12) & 0xf; -} - -static inline void wlp_ie_set_hash_length(struct wlp_ie *ie, int hash_length) -{ - u16 caps = le16_to_cpu(ie->capabilities); - caps = (caps & ~(0xf << 12)) | (hash_length << 12); - ie->capabilities = cpu_to_le16(caps); -} - -/** - * WLP nonce - * WLP Draft 0.99 [6.6.1 Table 6] - * - * A 128-bit random number often used (E-SNonce1, E-SNonce2, Enrollee - * Nonce, Registrar Nonce, R-SNonce1, R-SNonce2). It is passed to HW so - * it is packed. - */ -struct wlp_nonce { - u8 data[16]; -} __packed; - -/** - * WLP UUID - * WLP Draft 0.99 [6.6.1 Table 6] - * - * Universally Unique Identifier (UUID) encoded as an octet string in the - * order the octets are shown in string representation in RFC4122. A UUID - * is often used (UUID-E, UUID-R, WSSID). It is passed to HW so it is packed. - */ -struct wlp_uuid { - u8 data[16]; -} __packed; - - -/** - * Primary and secondary device type attributes - * WLP Draft 0.99 [6.6.1.8] - */ -struct wlp_dev_type { - enum wlp_dev_category_id category:16; - u8 OUI[3]; - u8 OUIsubdiv; - __le16 subID; -} __packed; - -/** - * WLP frame header - * WLP Draft 0.99 [6.2] - */ -struct wlp_frame_hdr { - __le16 mux_hdr; /* WLP_PROTOCOL_ID */ - enum wlp_frame_type type:8; -} __packed; - -/** - * WLP attribute field header - * WLP Draft 0.99 [6.6.1] - * - * Header of each attribute found in an association frame - */ -struct wlp_attr_hdr { - __le16 type; - __le16 length; -} __packed; - -/** - * Device information commonly used together - * - * Each of these device information elements has a specified range in which it - * should fit (WLP 0.99 [Table 6]). This range provided in the spec does not - * include the termination null '\0' character (when used in the - * association protocol the attribute fields are accompanied - * with a "length" field so the full range from the spec can be used for - * the value). We thus allocate an extra byte to be able to store a string - * of max length with a terminating '\0'. - */ -struct wlp_device_info { - char name[33]; - char model_name[33]; - char manufacturer[65]; - char model_nr[33]; - char serial[33]; - struct wlp_dev_type prim_dev_type; -}; - -/** - * Macros for the WLP attributes - * - * There are quite a few attributes (total is 43). The attribute layout can be - * in one of three categories: one value, an array, an enum forced to 8 bits. - * These macros help with their definitions. - */ -#define wlp_attr(type, name) \ -struct wlp_attr_##name { \ - struct wlp_attr_hdr hdr; \ - type name; \ -} __packed; - -#define wlp_attr_array(type, name) \ -struct wlp_attr_##name { \ - struct wlp_attr_hdr hdr; \ - type name[]; \ -} __packed; - -/** - * WLP association attribute fields - * WLP Draft 0.99 [6.6.1 Table 6] - * - * Attributes appear in same order as the Table in the spec - * FIXME Does not define all attributes yet - */ - -/* Device name: Friendly name of sending device */ -wlp_attr_array(u8, dev_name) - -/* Enrollee Nonce: Random number generated by enrollee for an enrollment - * session */ -wlp_attr(struct wlp_nonce, enonce) - -/* Manufacturer name: Name of manufacturer of the sending device */ -wlp_attr_array(u8, manufacturer) - -/* WLP Message Type */ -wlp_attr(u8, msg_type) - -/* WLP Model name: Model name of sending device */ -wlp_attr_array(u8, model_name) - -/* WLP Model number: Model number of sending device */ -wlp_attr_array(u8, model_nr) - -/* Registrar Nonce: Random number generated by registrar for an enrollment - * session */ -wlp_attr(struct wlp_nonce, rnonce) - -/* Serial number of device */ -wlp_attr_array(u8, serial) - -/* UUID of enrollee */ -wlp_attr(struct wlp_uuid, uuid_e) - -/* UUID of registrar */ -wlp_attr(struct wlp_uuid, uuid_r) - -/* WLP Primary device type */ -wlp_attr(struct wlp_dev_type, prim_dev_type) - -/* WLP Secondary device type */ -wlp_attr(struct wlp_dev_type, sec_dev_type) - -/* WLP protocol version */ -wlp_attr(u8, version) - -/* WLP service set identifier */ -wlp_attr(struct wlp_uuid, wssid) - -/* WLP WSS name */ -wlp_attr_array(u8, wss_name) - -/* WLP WSS Secure Status */ -wlp_attr(u8, wss_sec_status) - -/* WSS Broadcast Address */ -wlp_attr(struct uwb_mac_addr, wss_bcast) - -/* WLP Accepting Enrollment */ -wlp_attr(u8, accept_enrl) - -/** - * WSS information attributes - * WLP Draft 0.99 [6.6.3 Table 15] - */ -struct wlp_wss_info { - struct wlp_attr_wssid wssid; - struct wlp_attr_wss_name name; - struct wlp_attr_accept_enrl accept; - struct wlp_attr_wss_sec_status sec_stat; - struct wlp_attr_wss_bcast bcast; -} __packed; - -/* WLP WSS Information */ -wlp_attr_array(struct wlp_wss_info, wss_info) - -/* WLP WSS Selection method */ -wlp_attr(u8, wss_sel_mthd) - -/* WLP WSS tag */ -wlp_attr(u8, wss_tag) - -/* WSS Virtual Address */ -wlp_attr(struct uwb_mac_addr, wss_virt) - -/* WLP association error */ -wlp_attr(u8, wlp_assc_err) - -/** - * WLP standard and abbreviated frames - * - * WLP Draft 0.99 [6.3] and [6.4] - * - * The difference between the WLP standard frame and the WLP - * abbreviated frame is that the standard frame includes the src - * and dest addresses from the Ethernet header, the abbreviated frame does - * not. - * The src/dest (as well as the type/length and client data) are already - * defined as part of the Ethernet header, we do not do this here. - * From this perspective the standard and abbreviated frames appear the - * same - they will be treated differently though. - * - * The size of this header is also captured in WLP_DATA_HLEN to enable - * interfaces to prepare their headroom. - */ -struct wlp_frame_std_abbrv_hdr { - struct wlp_frame_hdr hdr; - u8 tag; -} __packed; - -/** - * WLP association frames - * - * WLP Draft 0.99 [6.6] - */ -struct wlp_frame_assoc { - struct wlp_frame_hdr hdr; - enum wlp_assoc_type type:8; - struct wlp_attr_version version; - struct wlp_attr_msg_type msg_type; - u8 attr[]; -} __packed; - -/* Ethernet to dev address mapping */ -struct wlp_eda { - spinlock_t lock; - struct list_head cache; /* Eth<->Dev Addr cache */ -}; - -/** - * WSS information temporary storage - * - * This information is only stored temporarily during discovery. It should - * not be stored unless the device is enrolled in the advertised WSS. This - * is done mainly because we follow the letter of the spec in this regard. - * See WLP 0.99 [7.2.3]. - * When the device does become enrolled in a WSS the WSS information will - * be stored as part of the more comprehensive struct wlp_wss. - */ -struct wlp_wss_tmp_info { - char name[WLP_WSS_NAME_SIZE]; - u8 accept_enroll; - u8 sec_status; - struct uwb_mac_addr bcast; -}; - -struct wlp_wssid_e { - struct list_head node; - struct wlp_uuid wssid; - struct wlp_wss_tmp_info *info; -}; - -/** - * A cache entry of WLP neighborhood - * - * @node: head of list is wlp->neighbors - * @wssid: list of wssids of this neighbor, element is wlp_wssid_e - * @info: temporary storage for information learned during discovery. This - * storage is used together with the wssid_e temporary storage - * during discovery. - */ -struct wlp_neighbor_e { - struct list_head node; - struct wlp_uuid uuid; - struct uwb_dev *uwb_dev; - struct list_head wssid; /* Elements are wlp_wssid_e */ - struct wlp_device_info *info; -}; - -struct wlp; -/** - * Information for an association session in progress. - * - * @exp_message: The type of the expected message. Both this message and a - * F0 message (which can be sent in response to any - * association frame) will be accepted as a valid message for - * this session. - * @cb: The function that will be called upon receipt of this - * message. - * @cb_priv: Private data of callback - * @data: Data used in association process (always a sk_buff?) - * @neighbor: Address of neighbor with which association session is in - * progress. - */ -struct wlp_session { - enum wlp_assoc_type exp_message; - void (*cb)(struct wlp *); - void *cb_priv; - void *data; - struct uwb_dev_addr neighbor_addr; -}; - -/** - * WLP Service Set - * - * @mutex: used to protect entire WSS structure. - * - * @name: The WSS name is set to 65 bytes, 1 byte larger than the maximum - * allowed by the WLP spec. This is to have a null terminated string - * for display to the user. A maximum of 64 bytes will still be used - * when placing the WSS name field in association frames. - * - * @accept_enroll: Accepting enrollment: Set to one if registrar is - * accepting enrollment in WSS, or zero otherwise. - * - * Global and local information for each WSS in which we are enrolled. - * WLP 0.99 Section 7.2.1 and Section 7.2.2 - */ -struct wlp_wss { - struct mutex mutex; - struct kobject kobj; - /* Global properties. */ - struct wlp_uuid wssid; - u8 hash; - char name[WLP_WSS_NAME_SIZE]; - struct uwb_mac_addr bcast; - u8 secure_status:1; - u8 master_key[16]; - /* Local properties. */ - u8 tag; - struct uwb_mac_addr virtual_addr; - /* Extra */ - u8 accept_enroll:1; - enum wlp_wss_state state; -}; - -/** - * WLP main structure - * @mutex: protect changes to WLP structure. We only allow changes to the - * uuid, so currently this mutex only protects this field. - */ -struct wlp { - struct mutex mutex; - struct uwb_rc *rc; /* UWB radio controller */ - struct net_device *ndev; - struct uwb_pal pal; - struct wlp_eda eda; - struct wlp_uuid uuid; - struct wlp_session *session; - struct wlp_wss wss; - struct mutex nbmutex; /* Neighbor mutex protects neighbors list */ - struct list_head neighbors; /* Elements are wlp_neighbor_e */ - struct uwb_notifs_handler uwb_notifs_handler; - struct wlp_device_info *dev_info; - void (*fill_device_info)(struct wlp *wlp, struct wlp_device_info *info); - int (*xmit_frame)(struct wlp *, struct sk_buff *, - struct uwb_dev_addr *); - void (*stop_queue)(struct wlp *); - void (*start_queue)(struct wlp *); -}; - -/* sysfs */ - - -struct wlp_wss_attribute { - struct attribute attr; - ssize_t (*show)(struct wlp_wss *wss, char *buf); - ssize_t (*store)(struct wlp_wss *wss, const char *buf, size_t count); -}; - -#define WSS_ATTR(_name, _mode, _show, _store) \ -static struct wlp_wss_attribute wss_attr_##_name = __ATTR(_name, _mode, \ - _show, _store) - -extern int wlp_setup(struct wlp *, struct uwb_rc *, struct net_device *ndev); -extern void wlp_remove(struct wlp *); -extern ssize_t wlp_neighborhood_show(struct wlp *, char *); -extern int wlp_wss_setup(struct net_device *, struct wlp_wss *); -extern void wlp_wss_remove(struct wlp_wss *); -extern ssize_t wlp_wss_activate_show(struct wlp_wss *, char *); -extern ssize_t wlp_wss_activate_store(struct wlp_wss *, const char *, size_t); -extern ssize_t wlp_eda_show(struct wlp *, char *); -extern ssize_t wlp_eda_store(struct wlp *, const char *, size_t); -extern ssize_t wlp_uuid_show(struct wlp *, char *); -extern ssize_t wlp_uuid_store(struct wlp *, const char *, size_t); -extern ssize_t wlp_dev_name_show(struct wlp *, char *); -extern ssize_t wlp_dev_name_store(struct wlp *, const char *, size_t); -extern ssize_t wlp_dev_manufacturer_show(struct wlp *, char *); -extern ssize_t wlp_dev_manufacturer_store(struct wlp *, const char *, size_t); -extern ssize_t wlp_dev_model_name_show(struct wlp *, char *); -extern ssize_t wlp_dev_model_name_store(struct wlp *, const char *, size_t); -extern ssize_t wlp_dev_model_nr_show(struct wlp *, char *); -extern ssize_t wlp_dev_model_nr_store(struct wlp *, const char *, size_t); -extern ssize_t wlp_dev_serial_show(struct wlp *, char *); -extern ssize_t wlp_dev_serial_store(struct wlp *, const char *, size_t); -extern ssize_t wlp_dev_prim_category_show(struct wlp *, char *); -extern ssize_t wlp_dev_prim_category_store(struct wlp *, const char *, - size_t); -extern ssize_t wlp_dev_prim_OUI_show(struct wlp *, char *); -extern ssize_t wlp_dev_prim_OUI_store(struct wlp *, const char *, size_t); -extern ssize_t wlp_dev_prim_OUI_sub_show(struct wlp *, char *); -extern ssize_t wlp_dev_prim_OUI_sub_store(struct wlp *, const char *, - size_t); -extern ssize_t wlp_dev_prim_subcat_show(struct wlp *, char *); -extern ssize_t wlp_dev_prim_subcat_store(struct wlp *, const char *, - size_t); -extern int wlp_receive_frame(struct device *, struct wlp *, struct sk_buff *, - struct uwb_dev_addr *); -extern int wlp_prepare_tx_frame(struct device *, struct wlp *, - struct sk_buff *, struct uwb_dev_addr *); -void wlp_reset_all(struct wlp *wlp); - -/** - * Initialize WSS - */ -static inline -void wlp_wss_init(struct wlp_wss *wss) -{ - mutex_init(&wss->mutex); -} - -static inline -void wlp_init(struct wlp *wlp) -{ - INIT_LIST_HEAD(&wlp->neighbors); - mutex_init(&wlp->mutex); - mutex_init(&wlp->nbmutex); - wlp_wss_init(&wlp->wss); -} - - -#endif /* #ifndef __LINUX__WLP_H_ */ |