diff options
| -rw-r--r-- | Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt | 24 | ||||
| -rw-r--r-- | drivers/extcon/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/extcon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/extcon/extcon-usbc-cros-ec.c | 415 | ||||
| -rw-r--r-- | include/linux/mfd/cros_ec_commands.h | 75 |
5 files changed, 522 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt new file mode 100644 index 000000000000..8e8625c00dfa --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.txt @@ -0,0 +1,24 @@ +ChromeOS EC USB Type-C cable and accessories detection + +On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is +able to detect the state of external accessories such as display adapters +or USB devices when said accessories are attached or detached. + +The node for this device must be under a cros-ec node like google,cros-ec-spi +or google,cros-ec-i2c. + +Required properties: +- compatible: Should be "google,extcon-usbc-cros-ec". +- google,usb-port-id: Specifies the USB port ID to use. + +Example: + cros-ec@0 { + compatible = "google,cros-ec-i2c"; + + ... + + extcon { + compatible = "google,extcon-usbc-cros-ec"; + google,usb-port-id = <0>; + }; + } diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index 6d50071f07d5..a7bca4207f44 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -150,4 +150,11 @@ config EXTCON_USB_GPIO Say Y here to enable GPIO based USB cable detection extcon support. Used typically if GPIO is used for USB ID pin detection. +config EXTCON_USBC_CROS_EC + tristate "ChromeOS Embedded Controller EXTCON support" + depends on MFD_CROS_EC + help + Say Y here to enable USB Type C cable detection extcon support when + using Chrome OS EC based USB Type-C ports. + endif diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile index ecfa95804427..a73624e76193 100644 --- a/drivers/extcon/Makefile +++ b/drivers/extcon/Makefile @@ -20,3 +20,4 @@ obj-$(CONFIG_EXTCON_QCOM_SPMI_MISC) += extcon-qcom-spmi-misc.o obj-$(CONFIG_EXTCON_RT8973A) += extcon-rt8973a.o obj-$(CONFIG_EXTCON_SM5502) += extcon-sm5502.o obj-$(CONFIG_EXTCON_USB_GPIO) += extcon-usb-gpio.o +obj-$(CONFIG_EXTCON_USBC_CROS_EC) += extcon-usbc-cros-ec.o diff --git a/drivers/extcon/extcon-usbc-cros-ec.c b/drivers/extcon/extcon-usbc-cros-ec.c new file mode 100644 index 000000000000..e759ed477735 --- /dev/null +++ b/drivers/extcon/extcon-usbc-cros-ec.c @@ -0,0 +1,415 @@ +/** + * drivers/extcon/extcon-usbc-cros-ec - ChromeOS Embedded Controller extcon + * + * Copyright (C) 2017 Google, Inc + * Author: Benson Leung <bleung@chromium.org> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/extcon.h> +#include <linux/kernel.h> +#include <linux/mfd/cros_ec.h> +#include <linux/module.h> +#include <linux/notifier.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/sched.h> + +struct cros_ec_extcon_info { + struct device *dev; + struct extcon_dev *edev; + + int port_id; + + struct cros_ec_device *ec; + + struct notifier_block notifier; + + bool dp; /* DisplayPort enabled */ + bool mux; /* SuperSpeed (usb3) enabled */ + unsigned int power_type; +}; + +static const unsigned int usb_type_c_cable[] = { + EXTCON_DISP_DP, + EXTCON_NONE, +}; + +/** + * cros_ec_pd_command() - Send a command to the EC. + * @info: pointer to struct cros_ec_extcon_info + * @command: EC command + * @version: EC command version + * @outdata: EC command output data + * @outsize: Size of outdata + * @indata: EC command input data + * @insize: Size of indata + * + * Return: 0 on success, <0 on failure. + */ +static int cros_ec_pd_command(struct cros_ec_extcon_info *info, + unsigned int command, + unsigned int version, + void *outdata, + unsigned int outsize, + void *indata, + unsigned int insize) +{ + struct cros_ec_command *msg; + int ret; + + msg = kzalloc(sizeof(*msg) + max(outsize, insize), GFP_KERNEL); + + msg->version = version; + msg->command = command; + msg->outsize = outsize; + msg->insize = insize; + + if (outsize) + memcpy(msg->data, outdata, outsize); + + ret = cros_ec_cmd_xfer_status(info->ec, msg); + if (ret >= 0 && insize) + memcpy(indata, msg->data, insize); + + kfree(msg); + return ret; +} + +/** + * cros_ec_usb_get_power_type() - Get power type info about PD device attached + * to given port. + * @info: pointer to struct cros_ec_extcon_info + * + * Return: power type on success, <0 on failure. + */ +static int cros_ec_usb_get_power_type(struct cros_ec_extcon_info *info) +{ + struct ec_params_usb_pd_power_info req; + struct ec_response_usb_pd_power_info resp; + int ret; + + req.port = info->port_id; + ret = cros_ec_pd_command(info, EC_CMD_USB_PD_POWER_INFO, 0, + &req, sizeof(req), &resp, sizeof(resp)); + if (ret < 0) + return ret; + + return resp.type; +} + +/** + * cros_ec_usb_get_pd_mux_state() - Get PD mux state for given port. + * @info: pointer to struct cros_ec_extcon_info + * + * Return: PD mux state on success, <0 on failure. + */ +static int cros_ec_usb_get_pd_mux_state(struct cros_ec_extcon_info *info) +{ + struct ec_params_usb_pd_mux_info req; + struct ec_response_usb_pd_mux_info resp; + int ret; + + req.port = info->port_id; + ret = cros_ec_pd_command(info, EC_CMD_USB_PD_MUX_INFO, 0, + &req, sizeof(req), + &resp, sizeof(resp)); + if (ret < 0) + return ret; + + return resp.flags; +} + +/** + * cros_ec_usb_get_role() - Get role info about possible PD device attached to a + * given port. + * @info: pointer to struct cros_ec_extcon_info + * @polarity: pointer to cable polarity (return value) + * + * Return: role info on success, -ENOTCONN if no cable is connected, <0 on + * failure. + */ +static int cros_ec_usb_get_role(struct cros_ec_extcon_info *info, + bool *polarity) +{ + struct ec_params_usb_pd_control pd_control; + struct ec_response_usb_pd_control_v1 resp; + int ret; + + pd_control.port = info->port_id; + pd_control.role = USB_PD_CTRL_ROLE_NO_CHANGE; + pd_control.mux = USB_PD_CTRL_MUX_NO_CHANGE; + ret = cros_ec_pd_command(info, EC_CMD_USB_PD_CONTROL, 1, + &pd_control, sizeof(pd_control), + &resp, sizeof(resp)); + if (ret < 0) + return ret; + + if (!(resp.enabled & PD_CTRL_RESP_ENABLED_CONNECTED)) + return -ENOTCONN; + + *polarity = resp.polarity; + + return resp.role; +} + +/** + * cros_ec_pd_get_num_ports() - Get number of EC charge ports. + * @info: pointer to struct cros_ec_extcon_info + * + * Return: number of ports on success, <0 on failure. + */ +static int cros_ec_pd_get_num_ports(struct cros_ec_extcon_info *info) +{ + struct ec_response_usb_pd_ports resp; + int ret; + + ret = cros_ec_pd_command(info, EC_CMD_USB_PD_PORTS, + 0, NULL, 0, &resp, sizeof(resp)); + if (ret < 0) + return ret; + + return resp.num_ports; +} + +static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info, + bool force) +{ + struct device *dev = info->dev; + int role, power_type; + bool polarity = false; + bool dp = false; + bool mux = false; + bool hpd = false; + + power_type = cros_ec_usb_get_power_type(info); + if (power_type < 0) { + dev_err(dev, "failed getting power type err = %d\n", + power_type); + return power_type; + } + + role = cros_ec_usb_get_role(info, &polarity); + if (role < 0) { + if (role != -ENOTCONN) { + dev_err(dev, "failed getting role err = %d\n", role); + return role; + } + } else { + int pd_mux_state; + + pd_mux_state = cros_ec_usb_get_pd_mux_state(info); + if (pd_mux_state < 0) + pd_mux_state = USB_PD_MUX_USB_ENABLED; + + dp = pd_mux_state & USB_PD_MUX_DP_ENABLED; + mux = pd_mux_state & USB_PD_MUX_USB_ENABLED; + hpd = pd_mux_state & USB_PD_MUX_HPD_IRQ; + } + + if (force || info->dp != dp || info->mux != mux || + info->power_type != power_type) { + + info->dp = dp; + info->mux = mux; + info->power_type = power_type; + + extcon_set_state(info->edev, EXTCON_DISP_DP, dp); + + extcon_set_property(info->edev, EXTCON_DISP_DP, + EXTCON_PROP_USB_TYPEC_POLARITY, + (union extcon_property_value)(int)polarity); + extcon_set_property(info->edev, EXTCON_DISP_DP, + EXTCON_PROP_USB_SS, + (union extcon_property_value)(int)mux); + extcon_set_property(info->edev, EXTCON_DISP_DP, + EXTCON_PROP_DISP_HPD, + (union extcon_property_value)(int)hpd); + + extcon_sync(info->edev, EXTCON_DISP_DP); + + } else if (hpd) { + extcon_set_property(info->edev, EXTCON_DISP_DP, + EXTCON_PROP_DISP_HPD, + (union extcon_property_value)(int)hpd); + extcon_sync(info->edev, EXTCON_DISP_DP); + } + + return 0; +} + +static int extcon_cros_ec_event(struct notifier_block *nb, + unsigned long queued_during_suspend, + void *_notify) +{ + struct cros_ec_extcon_info *info; + struct cros_ec_device *ec; + u32 host_event; + + info = container_of(nb, struct cros_ec_extcon_info, notifier); + ec = info->ec; + + host_event = cros_ec_get_host_event(ec); + if (host_event & (EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU) | + EC_HOST_EVENT_MASK(EC_HOST_EVENT_USB_MUX))) { + extcon_cros_ec_detect_cable(info, false); + return NOTIFY_OK; + } + + return NOTIFY_DONE; +} + +static int extcon_cros_ec_probe(struct platform_device *pdev) +{ + struct cros_ec_extcon_info *info; + struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent); + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + int numports, ret; + + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->dev = dev; + info->ec = ec; + + if (np) { + u32 port; + + ret = of_property_read_u32(np, "google,usb-port-id", &port); + if (ret < 0) { + dev_err(dev, "Missing google,usb-port-id property\n"); + return ret; + } + info->port_id = port; + } else { + info->port_id = pdev->id; + } + + numports = cros_ec_pd_get_num_ports(info); + if (numports < 0) { + dev_err(dev, "failed getting number of ports! ret = %d\n", + numports); + return numports; + } + + if (info->port_id >= numports) { + dev_err(dev, "This system only supports %d ports\n", numports); + return -ENODEV; + } + + info->edev = devm_extcon_dev_allocate(dev, usb_type_c_cable); + if (IS_ERR(info->edev)) { + dev_err(dev, "failed to allocate extcon device\n"); + return -ENOMEM; + } + + ret = devm_extcon_dev_register(dev, info->edev); + if (ret < 0) { + dev_err(dev, "failed to register extcon device\n"); + return ret; + } + + extcon_set_property_capability(info->edev, EXTCON_DISP_DP, + EXTCON_PROP_USB_TYPEC_POLARITY); + extcon_set_property_capability(info->edev, EXTCON_DISP_DP, + EXTCON_PROP_USB_SS); + extcon_set_property_capability(info->edev, EXTCON_DISP_DP, + EXTCON_PROP_DISP_HPD); + + platform_set_drvdata(pdev, info); + + /* Get PD events from the EC */ + info->notifier.notifier_call = extcon_cros_ec_event; + ret = blocking_notifier_chain_register(&info->ec->event_notifier, + &info->notifier); + if (ret < 0) { + dev_err(dev, "failed to register notifier\n"); + return ret; + } + + /* Perform initial detection */ + ret = extcon_cros_ec_detect_cable(info, true); + if (ret < 0) { + dev_err(dev, "failed to detect initial cable state\n"); + goto unregister_notifier; + } + + return 0; + +unregister_notifier: + blocking_notifier_chain_unregister(&info->ec->event_notifier, + &info->notifier); + return ret; +} + +static int extcon_cros_ec_remove(struct platform_device *pdev) +{ + struct cros_ec_extcon_info *info = platform_get_drvdata(pdev); + + blocking_notifier_chain_unregister(&info->ec->event_notifier, + &info->notifier); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int extcon_cros_ec_suspend(struct device *dev) +{ + return 0; +} + +static int extcon_cros_ec_resume(struct device *dev) +{ + int ret; + struct cros_ec_extcon_info *info = dev_get_drvdata(dev); + + ret = extcon_cros_ec_detect_cable(info, true); + if (ret < 0) + dev_err(dev, "failed to detect cable state on resume\n"); + + return 0; +} + +static const struct dev_pm_ops extcon_cros_ec_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(extcon_cros_ec_suspend, extcon_cros_ec_resume) +}; + +#define DEV_PM_OPS (&extcon_cros_ec_dev_pm_ops) +#else +#define DEV_PM_OPS NULL +#endif /* CONFIG_PM_SLEEP */ + +#ifdef CONFIG_OF +static const struct of_device_id extcon_cros_ec_of_match[] = { + { .compatible = "google,extcon-usbc-cros-ec" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, extcon_cros_ec_of_match); +#endif /* CONFIG_OF */ + +static struct platform_driver extcon_cros_ec_driver = { + .driver = { + .name = "extcon-usbc-cros-ec", + .of_match_table = of_match_ptr(extcon_cros_ec_of_match), + .pm = DEV_PM_OPS, + }, + .remove = extcon_cros_ec_remove, + .probe = extcon_cros_ec_probe, +}; + +module_platform_driver(extcon_cros_ec_driver); + +MODULE_DESCRIPTION("ChromeOS Embedded Controller extcon driver"); +MODULE_AUTHOR("Benson Leung <bleung@chromium.org>"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h index 190c8f4afa02..2b16e95b9bb8 100644 --- a/include/linux/mfd/cros_ec_commands.h +++ b/include/linux/mfd/cros_ec_commands.h @@ -285,6 +285,11 @@ enum host_event_code { EC_HOST_EVENT_HANG_DETECT = 20, /* Hang detect logic detected a hang and warm rebooted the AP */ EC_HOST_EVENT_HANG_REBOOT = 21, + /* PD MCU triggering host event */ + EC_HOST_EVENT_PD_MCU = 22, + + /* EC desires to change state of host-controlled USB mux */ + EC_HOST_EVENT_USB_MUX = 28, /* * The high bit of the event mask is not used as a host event code. If @@ -2905,6 +2910,76 @@ struct ec_params_usb_pd_control { uint8_t mux; } __packed; +#define PD_CTRL_RESP_ENABLED_COMMS (1 << 0) /* Communication enabled */ +#define PD_CTRL_RESP_ENABLED_CONNECTED (1 << 1) /* Device connected */ +#define PD_CTRL_RESP_ENABLED_PD_CAPABLE (1 << 2) /* Partner is PD capable */ + +struct ec_response_usb_pd_control_v1 { + uint8_t enabled; + uint8_t role; + uint8_t polarity; + char state[32]; +} __packed; + +#define EC_CMD_USB_PD_PORTS 0x102 + +struct ec_response_usb_pd_ports { + uint8_t num_ports; +} __packed; + +#define EC_CMD_USB_PD_POWER_INFO 0x103 + +#define PD_POWER_CHARGING_PORT 0xff +struct ec_params_usb_pd_power_info { + uint8_t port; +} __packed; + +enum usb_chg_type { + USB_CHG_TYPE_NONE, + USB_CHG_TYPE_PD, + USB_CHG_TYPE_C, + USB_CHG_TYPE_PROPRIETARY, + USB_CHG_TYPE_BC12_DCP, + USB_CHG_TYPE_BC12_CDP, + USB_CHG_TYPE_BC12_SDP, + USB_CHG_TYPE_OTHER, + USB_CHG_TYPE_VBUS, + USB_CHG_TYPE_UNKNOWN, +}; + +struct usb_chg_measures { + uint16_t voltage_max; + uint16_t voltage_now; + uint16_t current_max; + uint16_t current_lim; +} __packed; + +struct ec_response_usb_pd_power_info { + uint8_t role; + uint8_t type; + uint8_t dualrole; + uint8_t reserved1; + struct usb_chg_measures meas; + uint32_t max_power; +} __packed; + +/* Get info about USB-C SS muxes */ +#define EC_CMD_USB_PD_MUX_INFO 0x11a + +struct ec_params_usb_pd_mux_info { + uint8_t port; /* USB-C port number */ +} __packed; + +/* Flags representing mux state */ +#define USB_PD_MUX_USB_ENABLED (1 << 0) +#define USB_PD_MUX_DP_ENABLED (1 << 1) +#define USB_PD_MUX_POLARITY_INVERTED (1 << 2) +#define USB_PD_MUX_HPD_IRQ (1 << 3) + +struct ec_response_usb_pd_mux_info { + uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */ +} __packed; + /*****************************************************************************/ /* * Passthru commands |