diff options
| -rw-r--r-- | Documentation/devicetree/bindings/mfd/as3722.txt | 194 | ||||
| -rw-r--r-- | drivers/mfd/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/mfd/Makefile | 1 | ||||
| -rw-r--r-- | drivers/mfd/as3722.c | 449 | ||||
| -rw-r--r-- | include/dt-bindings/mfd/as3722.h | 52 | ||||
| -rw-r--r-- | include/linux/mfd/as3722.h | 423 |
6 files changed, 1131 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mfd/as3722.txt b/Documentation/devicetree/bindings/mfd/as3722.txt new file mode 100644 index 000000000000..fc2191ecfd6b --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/as3722.txt @@ -0,0 +1,194 @@ +* ams AS3722 Power management IC. + +Required properties: +------------------- +- compatible: Must be "ams,as3722". +- reg: I2C device address. +- interrupt-controller: AS3722 has internal interrupt controller which takes the + interrupt request from internal sub-blocks like RTC, regulators, GPIOs as well + as external input. +- #interrupt-cells: Should be set to 2 for IRQ number and flags. + The first cell is the IRQ number. IRQ numbers for different interrupt source + of AS3722 are defined at dt-bindings/mfd/as3722.h + The second cell is the flags, encoded as the trigger masks from binding document + interrupts.txt, using dt-bindings/irq. + +Optional submodule and their properties: +======================================= + +Pinmux and GPIO: +=============== +Device has 8 GPIO pins which can be configured as GPIO as well as the special IO +functions. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Following are properties which is needed if GPIO and pinmux functionality +is required: + Required properties: + ------------------- + - gpio-controller: Marks the device node as a GPIO controller. + - #gpio-cells: Number of GPIO cells. Refer to binding document + gpio/gpio.txt + + Optional properties: + -------------------- + Following properties are require if pin control setting is required + at boot. + - pinctrl-names: A pinctrl state named "default" be defined, using the + bindings in pinctrl/pinctrl-binding.txt. + - pinctrl[0...n]: Properties to contain the phandle that refer to + different nodes of pin control settings. These nodes represents + the pin control setting of state 0 to state n. Each of these + nodes contains different subnodes to represents some desired + configuration for a list of pins. This configuration can + include the mux function to select on those pin(s), and + various pin configuration parameters, such as pull-up, + open drain. + + Each subnode have following properties: + Required properties: + - pins: List of pins. Valid values of pins properties are: + gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, + gpio6, gpio7 + + Optional properties: + function, bias-disable, bias-pull-up, bias-pull-down, + bias-high-impedance, drive-open-drain. + + Valid values for function properties are: + gpio, interrupt-out, gpio-in-interrupt, + vsup-vbat-low-undebounce-out, + vsup-vbat-low-debounce-out, + voltage-in-standby, oc-pg-sd0, oc-pg-sd6, + powergood-out, pwm-in, pwm-out, clk32k-out, + watchdog-in, soft-reset-in + +Regulators: +=========== +Device has multiple DCDC and LDOs. The node "regulators" is require if regulator +functionality is needed. + +Following are properties of regulator subnode. + + Optional properties: + ------------------- + The input supply of regulators are the optional properties on the + regulator node. The input supply of these regulators are provided + through following properties: + vsup-sd2-supply: Input supply for SD2. + vsup-sd3-supply: Input supply for SD3. + vsup-sd4-supply: Input supply for SD4. + vsup-sd5-supply: Input supply for SD5. + vin-ldo0-supply: Input supply for LDO0. + vin-ldo1-6-supply: Input supply for LDO1 and LDO6. + vin-ldo2-5-7-supply: Input supply for LDO2, LDO5 and LDO7. + vin-ldo3-4-supply: Input supply for LDO3 and LDO4. + vin-ldo9-10-supply: Input supply for LDO9 and LDO10. + vin-ldo11-supply: Input supply for LDO11. + + Optional sub nodes for regulators: + --------------------------------- + The subnodes name is the name of regulator and it must be one of: + sd[0-6], ldo[0-7], ldo[9-11] + + Each sub-node should contain the constraints and initialization + information for that regulator. See regulator.txt for a description + of standard properties for these sub-nodes. + Additional optional custom properties are listed below. + ams,ext-control: External control of the rail. The option of + this properties will tell which external input is + controlling this rail. Valid values are 0, 1, 2 ad 3. + 0: There is no external control of this rail. + 1: Rail is controlled by ENABLE1 input pin. + 2: Rail is controlled by ENABLE2 input pin. + 3: Rail is controlled by ENABLE3 input pin. + Missing this property on DT will be assume as no + external control. The external control pin macros + are defined @dt-bindings/mfd/as3722.h + + ams,enable-tracking: Enable tracking with SD1, only supported + by LDO3. + +Example: +-------- +#include <dt-bindings/mfd/as3722.h> +... +ams3722 { + compatible = "ams,as3722"; + reg = <0x48>; + + interrupt-parent = <&intc>; + interrupt-controller; + #interrupt-cells = <2>; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&as3722_default>; + + as3722_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + bias-pull-down; + }; + + gpio1_2_4_7 { + pins = "gpio1", "gpio2", "gpio4", "gpio7"; + function = "gpio"; + bias-pull-up; + }; + + gpio5 { + pins = "gpio5"; + function = "clk32k_out"; + }; + } + + regulators { + vsup-sd2-supply = <...>; + ... + + sd0 { + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + ams,ext-control = <2>; + }; + + sd1 { + regulator-name = "vdd_core"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + ams,ext-control = <1>; + }; + + sd2 { + regulator-name = "vddio_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + sd4 { + regulator-name = "avdd-hdmi-pex"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; + + sd5 { + regulator-name = "vdd-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + .... + }; +}; diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index d078fe4a82ef..b7c74a73d371 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -27,6 +27,18 @@ config MFD_AS3711 help Support for the AS3711 PMIC from AMS +config MFD_AS3722 + bool "ams AS3722 Power Management IC" + select MFD_CORE + select REGMAP_I2C + select REGMAP_IRQ + depends on I2C && OF + help + The ams AS3722 is a compact system PMU suitable for mobile phones, + tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down + controllers, 11 LDOs, RTC, automatic battery, temperature and + over current monitoring, GPIOs, ADC and a watchdog. + config PMIC_ADP5520 bool "Analog Devices ADP5520/01 MFD PMIC Core Support" depends on I2C=y diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 656cec90a1e5..8a28dc90fe78 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -162,4 +162,5 @@ obj-$(CONFIG_MFD_LM3533) += lm3533-core.o lm3533-ctrlbank.o obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o vexpress-sysreg.o obj-$(CONFIG_MFD_RETU) += retu-mfd.o obj-$(CONFIG_MFD_AS3711) += as3711.o +obj-$(CONFIG_MFD_AS3722) += as3722.o obj-$(CONFIG_MFD_STW481X) += stw481x.o diff --git a/drivers/mfd/as3722.c b/drivers/mfd/as3722.c new file mode 100644 index 000000000000..cd8ee593cfa8 --- /dev/null +++ b/drivers/mfd/as3722.c @@ -0,0 +1,449 @@ +/* + * Core driver for ams AS3722 PMICs + * + * Copyright (C) 2013 AMS AG + * Copyright (c) 2013, NVIDIA Corporation. All rights reserved. + * + * Author: Florian Lobmaier <florian.lobmaier@ams.com> + * Author: Laxman Dewangan <ldewangan@nvidia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mfd/core.h> +#include <linux/mfd/as3722.h> +#include <linux/of.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +#define AS3722_DEVICE_ID 0x0C + +static const struct resource as3722_rtc_resource[] = { + { + .name = "as3722-rtc-alarm", + .start = AS3722_IRQ_RTC_ALARM, + .end = AS3722_IRQ_RTC_ALARM, + .flags = IORESOURCE_IRQ, + }, +}; + +static const struct resource as3722_adc_resource[] = { + { + .name = "as3722-adc", + .start = AS3722_IRQ_ADC, + .end = AS3722_IRQ_ADC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mfd_cell as3722_devs[] = { + { + .name = "as3722-pinctrl", + }, + { + .name = "as3722-regulator", + }, + { + .name = "as3722-rtc", + .num_resources = ARRAY_SIZE(as3722_rtc_resource), + .resources = as3722_rtc_resource, + }, + { + .name = "as3722-adc", + .num_resources = ARRAY_SIZE(as3722_adc_resource), + .resources = as3722_adc_resource, + }, + { + .name = "as3722-power-off", + }, +}; + +static const struct regmap_irq as3722_irqs[] = { + /* INT1 IRQs */ + [AS3722_IRQ_LID] = { + .mask = AS3722_INTERRUPT_MASK1_LID, + }, + [AS3722_IRQ_ACOK] = { + .mask = AS3722_INTERRUPT_MASK1_ACOK, + }, + [AS3722_IRQ_ENABLE1] = { + .mask = AS3722_INTERRUPT_MASK1_ENABLE1, + }, + [AS3722_IRQ_OCCUR_ALARM_SD0] = { + .mask = AS3722_INTERRUPT_MASK1_OCURR_ALARM_SD0, + }, + [AS3722_IRQ_ONKEY_LONG_PRESS] = { + .mask = AS3722_INTERRUPT_MASK1_ONKEY_LONG, + }, + [AS3722_IRQ_ONKEY] = { + .mask = AS3722_INTERRUPT_MASK1_ONKEY, + }, + [AS3722_IRQ_OVTMP] = { + .mask = AS3722_INTERRUPT_MASK1_OVTMP, + }, + [AS3722_IRQ_LOWBAT] = { + .mask = AS3722_INTERRUPT_MASK1_LOWBAT, + }, + + /* INT2 IRQs */ + [AS3722_IRQ_SD0_LV] = { + .mask = AS3722_INTERRUPT_MASK2_SD0_LV, + .reg_offset = 1, + }, + [AS3722_IRQ_SD1_LV] = { + .mask = AS3722_INTERRUPT_MASK2_SD1_LV, + .reg_offset = 1, + }, + [AS3722_IRQ_SD2_LV] = { + .mask = AS3722_INTERRUPT_MASK2_SD2345_LV, + .reg_offset = 1, + }, + [AS3722_IRQ_PWM1_OV_PROT] = { + .mask = AS3722_INTERRUPT_MASK2_PWM1_OV_PROT, + .reg_offset = 1, + }, + [AS3722_IRQ_PWM2_OV_PROT] = { + .mask = AS3722_INTERRUPT_MASK2_PWM2_OV_PROT, + .reg_offset = 1, + }, + [AS3722_IRQ_ENABLE2] = { + .mask = AS3722_INTERRUPT_MASK2_ENABLE2, + .reg_offset = 1, + }, + [AS3722_IRQ_SD6_LV] = { + .mask = AS3722_INTERRUPT_MASK2_SD6_LV, + .reg_offset = 1, + }, + [AS3722_IRQ_RTC_REP] = { + .mask = AS3722_INTERRUPT_MASK2_RTC_REP, + .reg_offset = 1, + }, + + /* INT3 IRQs */ + [AS3722_IRQ_RTC_ALARM] = { + .mask = AS3722_INTERRUPT_MASK3_RTC_ALARM, + .reg_offset = 2, + }, + [AS3722_IRQ_GPIO1] = { + .mask = AS3722_INTERRUPT_MASK3_GPIO1, + .reg_offset = 2, + }, + [AS3722_IRQ_GPIO2] = { + .mask = AS3722_INTERRUPT_MASK3_GPIO2, + .reg_offset = 2, + }, + [AS3722_IRQ_GPIO3] = { + .mask = AS3722_INTERRUPT_MASK3_GPIO3, + .reg_offset = 2, + }, + [AS3722_IRQ_GPIO4] = { + .mask = AS3722_INTERRUPT_MASK3_GPIO4, + .reg_offset = 2, + }, + [AS3722_IRQ_GPIO5] = { + .mask = AS3722_INTERRUPT_MASK3_GPIO5, + .reg_offset = 2, + }, + [AS3722_IRQ_WATCHDOG] = { + .mask = AS3722_INTERRUPT_MASK3_WATCHDOG, + .reg_offset = 2, + }, + [AS3722_IRQ_ENABLE3] = { + .mask = AS3722_INTERRUPT_MASK3_ENABLE3, + .reg_offset = 2, + }, + + /* INT4 IRQs */ + [AS3722_IRQ_TEMP_SD0_SHUTDOWN] = { + .mask = AS3722_INTERRUPT_MASK4_TEMP_SD0_SHUTDOWN, + .reg_offset = 3, + }, + [AS3722_IRQ_TEMP_SD1_SHUTDOWN] = { + .mask = AS3722_INTERRUPT_MASK4_TEMP_SD1_SHUTDOWN, + .reg_offset = 3, + }, + [AS3722_IRQ_TEMP_SD2_SHUTDOWN] = { + .mask = AS3722_INTERRUPT_MASK4_TEMP_SD6_SHUTDOWN, + .reg_offset = 3, + }, + [AS3722_IRQ_TEMP_SD0_ALARM] = { + .mask = AS3722_INTERRUPT_MASK4_TEMP_SD0_ALARM, + .reg_offset = 3, + }, + [AS3722_IRQ_TEMP_SD1_ALARM] = { + .mask = AS3722_INTERRUPT_MASK4_TEMP_SD1_ALARM, + .reg_offset = 3, + }, + [AS3722_IRQ_TEMP_SD6_ALARM] = { + .mask = AS3722_INTERRUPT_MASK4_TEMP_SD6_ALARM, + .reg_offset = 3, + }, + [AS3722_IRQ_OCCUR_ALARM_SD6] = { + .mask = AS3722_INTERRUPT_MASK4_OCCUR_ALARM_SD6, + .reg_offset = 3, + }, + [AS3722_IRQ_ADC] = { + .mask = AS3722_INTERRUPT_MASK4_ADC, + .reg_offset = 3, + }, +}; + +static const struct regmap_irq_chip as3722_irq_chip = { + .name = "as3722", + .irqs = as3722_irqs, + .num_irqs = ARRAY_SIZE(as3722_irqs), + .num_regs = 4, + .status_base = AS3722_INTERRUPT_STATUS1_REG, + .mask_base = AS3722_INTERRUPT_MASK1_REG, +}; + +static int as3722_check_device_id(struct as3722 *as3722) +{ + u32 val; + int ret; + + /* Check that this is actually a AS3722 */ + ret = as3722_read(as3722, AS3722_ASIC_ID1_REG, &val); + if (ret < 0) { + dev_err(as3722->dev, "ASIC_ID1 read failed: %d\n", ret); + return ret; + } + + if (val != AS3722_DEVICE_ID) { + dev_err(as3722->dev, "Device is not AS3722, ID is 0x%x\n", val); + return -ENODEV; + } + + ret = as3722_read(as3722, AS3722_ASIC_ID2_REG, &val); + if (ret < 0) { + dev_err(as3722->dev, "ASIC_ID2 read failed: %d\n", ret); + return ret; + } + + dev_info(as3722->dev, "AS3722 with revision 0x%x found\n", val); + return 0; +} + +static int as3722_configure_pullups(struct as3722 *as3722) +{ + int ret; + u32 val = 0; + + if (as3722->en_intern_int_pullup) + val |= AS3722_INT_PULL_UP; + if (as3722->en_intern_i2c_pullup) + val |= AS3722_I2C_PULL_UP; + + ret = as3722_update_bits(as3722, AS3722_IOVOLTAGE_REG, + AS3722_INT_PULL_UP | AS3722_I2C_PULL_UP, val); + if (ret < 0) + dev_err(as3722->dev, "IOVOLTAGE_REG update failed: %d\n", ret); + return ret; +} + +static const struct regmap_range as3722_readable_ranges[] = { + regmap_reg_range(AS3722_SD0_VOLTAGE_REG, AS3722_SD6_VOLTAGE_REG), + regmap_reg_range(AS3722_GPIO0_CONTROL_REG, AS3722_LDO7_VOLTAGE_REG), + regmap_reg_range(AS3722_LDO9_VOLTAGE_REG, AS3722_REG_SEQU_MOD3_REG), + regmap_reg_range(AS3722_SD_PHSW_CTRL_REG, AS3722_PWM_CONTROL_H_REG), + regmap_reg_range(AS3722_WATCHDOG_TIMER_REG, AS3722_WATCHDOG_TIMER_REG), + regmap_reg_range(AS3722_WATCHDOG_SOFTWARE_SIGNAL_REG, + AS3722_BATTERY_VOLTAGE_MONITOR2_REG), + regmap_reg_range(AS3722_SD_CONTROL_REG, AS3722_PWM_VCONTROL4_REG), + regmap_reg_range(AS3722_BB_CHARGER_REG, AS3722_SRAM_REG), + regmap_reg_range(AS3722_RTC_ACCESS_REG, AS3722_RTC_ACCESS_REG), + regmap_reg_range(AS3722_RTC_STATUS_REG, AS3722_TEMP_STATUS_REG), + regmap_reg_range(AS3722_ADC0_CONTROL_REG, AS3722_ADC_CONFIGURATION_REG), + regmap_reg_range(AS3722_ASIC_ID1_REG, AS3722_ASIC_ID2_REG), + regmap_reg_range(AS3722_LOCK_REG, AS3722_LOCK_REG), +}; + +static const struct regmap_access_table as3722_readable_table = { + .yes_ranges = as3722_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(as3722_readable_ranges), +}; + +static const struct regmap_range as3722_writable_ranges[] = { + regmap_reg_range(AS3722_SD0_VOLTAGE_REG, AS3722_SD6_VOLTAGE_REG), + regmap_reg_range(AS3722_GPIO0_CONTROL_REG, AS3722_LDO7_VOLTAGE_REG), + regmap_reg_range(AS3722_LDO9_VOLTAGE_REG, AS3722_GPIO_SIGNAL_OUT_REG), + regmap_reg_range(AS3722_REG_SEQU_MOD1_REG, AS3722_REG_SEQU_MOD3_REG), + regmap_reg_range(AS3722_SD_PHSW_CTRL_REG, AS3722_PWM_CONTROL_H_REG), + regmap_reg_range(AS3722_WATCHDOG_TIMER_REG, AS3722_WATCHDOG_TIMER_REG), + regmap_reg_range(AS3722_WATCHDOG_SOFTWARE_SIGNAL_REG, + AS3722_BATTERY_VOLTAGE_MONITOR2_REG), + regmap_reg_range(AS3722_SD_CONTROL_REG, AS3722_PWM_VCONTROL4_REG), + regmap_reg_range(AS3722_BB_CHARGER_REG, AS3722_SRAM_REG), + regmap_reg_range(AS3722_INTERRUPT_MASK1_REG, AS3722_TEMP_STATUS_REG), + regmap_reg_range(AS3722_ADC0_CONTROL_REG, AS3722_ADC1_CONTROL_REG), + regmap_reg_range(AS3722_ADC1_THRESHOLD_HI_MSB_REG, + AS3722_ADC_CONFIGURATION_REG), + regmap_reg_range(AS3722_LOCK_REG, AS3722_LOCK_REG), +}; + +static const struct regmap_access_table as3722_writable_table = { + .yes_ranges = as3722_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(as3722_writable_ranges), +}; + +static const struct regmap_range as3722_cacheable_ranges[] = { + regmap_reg_range(AS3722_SD0_VOLTAGE_REG, AS3722_LDO11_VOLTAGE_REG), + regmap_reg_range(AS3722_SD_CONTROL_REG, AS3722_LDOCONTROL1_REG), +}; + +static const struct regmap_access_table as3722_volatile_table = { + .no_ranges = as3722_cacheable_ranges, + .n_no_ranges = ARRAY_SIZE(as3722_cacheable_ranges), +}; + +const struct regmap_config as3722_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = AS3722_MAX_REGISTER, + .cache_type = REGCACHE_RBTREE, + .rd_table = &as3722_readable_table, + .wr_table = &as3722_writable_table, + .volatile_table = &as3722_volatile_table, +}; + +static int as3722_i2c_of_probe(struct i2c_client *i2c, + struct as3722 *as3722) +{ + struct device_node *np = i2c->dev.of_node; + struct irq_data *irq_data; + + if (!np) { + dev_err(&i2c->dev, "Device Tree not found\n"); + return -EINVAL; + } + + irq_data = irq_get_irq_data(i2c->irq); + if (!irq_data) { + dev_err(&i2c->dev, "Invalid IRQ: %d\n", i2c->irq); + return -EINVAL; + } + + as3722->en_intern_int_pullup = of_property_read_bool(np, + "ams,enable-internal-int-pullup"); + as3722->en_intern_i2c_pullup = of_property_read_bool(np, + "ams,enable-internal-i2c-pullup"); + as3722->irq_flags = irqd_get_trigger_type(irq_data); + dev_dbg(&i2c->dev, "IRQ flags are 0x%08lx\n", as3722->irq_flags); + return 0; +} + +static int as3722_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct as3722 *as3722; + unsigned long irq_flags; + int ret; + + as3722 = devm_kzalloc(&i2c->dev, sizeof(struct as3722), GFP_KERNEL); + if (!as3722) + return -ENOMEM; + + as3722->dev = &i2c->dev; + as3722->chip_irq = i2c->irq; + i2c_set_clientdata(i2c, as3722); + + ret = as3722_i2c_of_probe(i2c, as3722); + if (ret < 0) + return ret; + + as3722->regmap = devm_regmap_init_i2c(i2c, &as3722_regmap_config); + if (IS_ERR(as3722->regmap)) { + ret = PTR_ERR(as3722->regmap); + dev_err(&i2c->dev, "regmap init failed: %d\n", ret); + return ret; + } + + ret = as3722_check_device_id(as3722); + if (ret < 0) + return ret; + + irq_flags = as3722->irq_flags | IRQF_ONESHOT; + ret = regmap_add_irq_chip(as3722->regmap, as3722->chip_irq, + irq_flags, -1, &as3722_irq_chip, + &as3722->irq_data); + if (ret < 0) { + dev_err(as3722->dev, "Failed to add regmap irq: %d\n", ret); + return ret; + } + + ret = as3722_configure_pullups(as3722); + if (ret < 0) + goto scrub; + + ret = mfd_add_devices(&i2c->dev, -1, as3722_devs, + ARRAY_SIZE(as3722_devs), NULL, 0, + regmap_irq_get_domain(as3722->irq_data)); + if (ret) { + dev_err(as3722->dev, "Failed to add MFD devices: %d\n", ret); + goto scrub; + } + + dev_dbg(as3722->dev, "AS3722 core driver initialized successfully\n"); + return 0; + +scrub: + regmap_del_irq_chip(as3722->chip_irq, as3722->irq_data); + return ret; +} + +static int as3722_i2c_remove(struct i2c_client *i2c) +{ + struct as3722 *as3722 = i2c_get_clientdata(i2c); + + mfd_remove_devices(as3722->dev); + regmap_del_irq_chip(as3722->chip_irq, as3722->irq_data); + return 0; +} + +static const struct of_device_id as3722_of_match[] = { + { .compatible = "ams,as3722", }, + {}, +}; +MODULE_DEVICE_TABLE(of, as3722_of_match); + +static const struct i2c_device_id as3722_i2c_id[] = { + { "as3722", 0 }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, as3722_i2c_id); + +static struct i2c_driver as3722_i2c_driver = { + .driver = { + .name = "as3722", + .owner = THIS_MODULE, + .of_match_table = as3722_of_match, + }, + .probe = as3722_i2c_probe, + .remove = as3722_i2c_remove, + .id_table = as3722_i2c_id, +}; + +module_i2c_driver(as3722_i2c_driver); + +MODULE_DESCRIPTION("I2C support for AS3722 PMICs"); +MODULE_AUTHOR("Florian Lobmaier <florian.lobmaier@ams.com>"); +MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); +MODULE_LICENSE("GPL"); diff --git a/include/dt-bindings/mfd/as3722.h b/include/dt-bindings/mfd/as3722.h new file mode 100644 index 000000000000..0e692562d77b --- /dev/null +++ b/include/dt-bindings/mfd/as3722.h @@ -0,0 +1,52 @@ +/* + * This header provides macros for ams AS3722 device bindings. + * + * Copyright (c) 2013, NVIDIA Corporation. + * + * Author: Laxman Dewangan <ldewangan@nvidia.com> + * + */ + +#ifndef __DT_BINDINGS_AS3722_H__ +#define __DT_BINDINGS_AS3722_H__ + +/* External control pins */ +#define AS3722_EXT_CONTROL_PIN_ENABLE1 1 +#define AS3722_EXT_CONTROL_PIN_ENABLE2 2 +#define AS3722_EXT_CONTROL_PIN_ENABLE2 3 + +/* Interrupt numbers for AS3722 */ +#define AS3722_IRQ_LID 0 +#define AS3722_IRQ_ACOK 1 +#define AS3722_IRQ_ENABLE1 2 +#define AS3722_IRQ_OCCUR_ALARM_SD0 3 +#define AS3722_IRQ_ONKEY_LONG_PRESS 4 +#define AS3722_IRQ_ONKEY 5 +#define AS3722_IRQ_OVTMP 6 +#define AS3722_IRQ_LOWBAT 7 +#define AS3722_IRQ_SD0_LV 8 +#define AS3722_IRQ_SD1_LV 9 +#define AS3722_IRQ_SD2_LV 10 +#define AS3722_IRQ_PWM1_OV_PROT 11 +#define AS3722_IRQ_PWM2_OV_PROT 12 +#define AS3722_IRQ_ENABLE2 13 +#define AS3722_IRQ_SD6_LV 14 +#define AS3722_IRQ_RTC_REP 15 +#define AS3722_IRQ_RTC_ALARM 16 +#define AS3722_IRQ_GPIO1 17 +#define AS3722_IRQ_GPIO2 18 +#define AS3722_IRQ_GPIO3 19 +#define AS3722_IRQ_GPIO4 20 +#define AS3722_IRQ_GPIO5 21 +#define AS3722_IRQ_WATCHDOG 22 +#define AS3722_IRQ_ENABLE3 23 +#define AS3722_IRQ_TEMP_SD0_SHUTDOWN 24 +#define AS3722_IRQ_TEMP_SD1_SHUTDOWN 25 +#define AS3722_IRQ_TEMP_SD2_SHUTDOWN 26 +#define AS3722_IRQ_TEMP_SD0_ALARM 27 +#define AS3722_IRQ_TEMP_SD1_ALARM 28 +#define AS3722_IRQ_TEMP_SD6_ALARM 29 +#define AS3722_IRQ_OCCUR_ALARM_SD6 30 +#define AS3722_IRQ_ADC 31 + +#endif /* __DT_BINDINGS_AS3722_H__ */ diff --git a/include/linux/mfd/as3722.h b/include/linux/mfd/as3722.h new file mode 100644 index 000000000000..16bf8a0dcd97 --- /dev/null +++ b/include/linux/mfd/as3722.h @@ -0,0 +1,423 @@ +/* + * as3722 definitions + * + * Copyright (C) 2013 ams + * Copyright (c) 2013, NVIDIA Corporation. All rights reserved. + * + * Author: Florian Lobmaier <florian.lobmaier@ams.com> + * Author: Laxman Dewangan <ldewangan@nvidia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __LINUX_MFD_AS3722_H__ +#define __LINUX_MFD_AS3722_H__ + +#include <linux/regmap.h> + +/* AS3722 registers */ +#define AS3722_SD0_VOLTAGE_REG 0x00 +#define AS3722_SD1_VOLTAGE_REG 0x01 +#define AS3722_SD2_VOLTAGE_REG 0x02 +#define AS3722_SD3_VOLTAGE_REG 0x03 +#define AS3722_SD4_VOLTAGE_REG 0x04 +#define AS3722_SD5_VOLTAGE_REG 0x05 +#define AS3722_SD6_VOLTAGE_REG 0x06 +#define AS3722_GPIO0_CONTROL_REG 0x08 +#define AS3722_GPIO1_CONTROL_REG 0x09 +#define AS3722_GPIO2_CONTROL_REG 0x0A +#define AS3722_GPIO3_CONTROL_REG 0x0B +#define AS3722_GPIO4_CONTROL_REG 0x0C +#define AS3722_GPIO5_CONTROL_REG 0x0D +#define AS3722_GPIO6_CONTROL_REG 0x0E +#define AS3722_GPIO7_CONTROL_REG 0x0F +#define AS3722_LDO0_VOLTAGE_REG 0x10 +#define AS3722_LDO1_VOLTAGE_REG 0x11 +#define AS3722_LDO2_VOLTAGE_REG 0x12 +#define AS3722_LDO3_VOLTAGE_REG 0x13 +#define AS3722_LDO4_VOLTAGE_REG 0x14 +#define AS3722_LDO5_VOLTAGE_REG 0x15 +#define AS3722_LDO6_VOLTAGE_REG 0x16 +#define AS3722_LDO7_VOLTAGE_REG 0x17 +#define AS3722_LDO9_VOLTAGE_REG 0x19 +#define AS3722_LDO10_VOLTAGE_REG 0x1A +#define AS3722_LDO11_VOLTAGE_REG 0x1B +#define AS3722_GPIO_DEB1_REG 0x1E +#define AS3722_GPIO_DEB2_REG 0x1F +#define AS3722_GPIO_SIGNAL_OUT_REG 0x20 +#define AS3722_GPIO_SIGNAL_IN_REG 0x21 +#define AS3722_REG_SEQU_MOD1_REG 0x22 +#define AS3722_REG_SEQU_MOD2_REG 0x23 +#define AS3722_REG_SEQU_MOD3_REG 0x24 +#define AS3722_SD_PHSW_CTRL_REG 0x27 +#define AS3722_SD_PHSW_STATUS 0x28 +#define AS3722_SD0_CONTROL_REG 0x29 +#define AS3722_SD1_CONTROL_REG 0x2A +#define AS3722_SDmph_CONTROL_REG 0x2B +#define AS3722_SD23_CONTROL_REG 0x2C +#define AS3722_SD4_CONTROL_REG 0x2D +#define AS3722_SD5_CONTROL_REG 0x2E +#define AS3722_SD6_CONTROL_REG 0x2F +#define AS3722_SD_DVM_REG 0x30 +#define AS3722_RESET_REASON_REG 0x31 +#define AS3722_BATTERY_VOLTAGE_MONITOR_REG 0x32 +#define AS3722_STARTUP_CONTROL_REG 0x33 +#define AS3722_RESET_TIMER_REG 0x34 +#define AS3722_REFERENCE_CONTROL_REG 0x35 +#define AS3722_RESET_CONTROL_REG 0x36 +#define AS3722_OVER_TEMP_CONTROL_REG 0x37 +#define AS3722_WATCHDOG_CONTROL_REG 0x38 +#define AS3722_REG_STANDBY_MOD1_REG 0x39 +#define AS3722_REG_STANDBY_MOD2_REG 0x3A +#define AS3722_REG_STANDBY_MOD3_REG 0x3B +#define AS3722_ENABLE_CTRL1_REG 0x3C +#define AS3722_ENABLE_CTRL2_REG 0x3D +#define AS3722_ENABLE_CTRL3_REG 0x3E +#define AS3722_ENABLE_CTRL4_REG 0x3F +#define AS3722_ENABLE_CTRL5_REG 0x40 +#define AS3722_PWM_CONTROL_L_REG 0x41 +#define AS3722_PWM_CONTROL_H_REG 0x42 +#define AS3722_WATCHDOG_TIMER_REG 0x46 +#define AS3722_WATCHDOG_SOFTWARE_SIGNAL_REG 0x48 +#define AS3722_IOVOLTAGE_REG 0x49 +#define AS3722_BATTERY_VOLTAGE_MONITOR2_REG 0x4A +#define AS3722_SD_CONTROL_REG 0x4D +#define AS3722_LDOCONTROL0_REG 0x4E +#define AS3722_LDOCONTROL1_REG 0x4F +#define AS3722_SD0_PROTECT_REG 0x50 +#define AS3722_SD6_PROTECT_REG 0x51 +#define AS3722_PWM_VCONTROL1_REG 0x52 +#define AS3722_PWM_VCONTROL2_REG 0x53 +#define AS3722_PWM_VCONTROL3_REG 0x54 +#define AS3722_PWM_VCONTROL4_REG 0x55 +#define AS3722_BB_CHARGER_REG 0x57 +#define AS3722_CTRL_SEQU1_REG 0x58 +#define AS3722_CTRL_SEQU2_REG 0x59 +#define AS3722_OVCURRENT_REG 0x5A +#define AS3722_OVCURRENT_DEB_REG 0x5B +#define AS3722_SDLV_DEB_REG 0x5C +#define AS3722_OC_PG_CTRL_REG 0x5D +#define AS3722_OC_PG_CTRL2_REG 0x5E +#define AS3722_CTRL_STATUS 0x5F +#define AS3722_RTC_CONTROL_REG 0x60 +#define AS3722_RTC_SECOND_REG 0x61 +#define AS3722_RTC_MINUTE_REG 0x62 +#define AS3722_RTC_HOUR_REG 0x63 +#define AS3722_RTC_DAY_REG 0x64 +#define AS3722_RTC_MONTH_REG 0x65 +#define AS3722_RTC_YEAR_REG 0x66 +#define AS3722_RTC_ALARM_SECOND_REG 0x67 +#define AS3722_RTC_ALARM_MINUTE_REG 0x68 +#define AS3722_RTC_ALARM_HOUR_REG 0x69 +#define AS3722_RTC_ALARM_DAY_REG 0x6A +#define AS3722_RTC_ALARM_MONTH_REG 0x6B +#define AS3722_RTC_ALARM_YEAR_REG 0x6C +#define AS3722_SRAM_REG 0x6D +#define AS3722_RTC_ACCESS_REG 0x6F +#define AS3722_RTC_STATUS_REG 0x73 +#define AS3722_INTERRUPT_MASK1_REG 0x74 +#define AS3722_INTERRUPT_MASK2_REG 0x75 +#define AS3722_INTERRUPT_MASK3_REG 0x76 +#define AS3722_INTERRUPT_MASK4_REG 0x77 +#define AS3722_INTERRUPT_STATUS1_REG 0x78 +#define AS3722_INTERRUPT_STATUS2_REG 0x79 +#define AS3722_INTERRUPT_STATUS3_REG 0x7A +#define AS3722_INTERRUPT_STATUS4_REG 0x7B +#define AS3722_TEMP_STATUS_REG 0x7D +#define AS3722_ADC0_CONTROL_REG 0x80 +#define AS3722_ADC1_CONTROL_REG 0x81 +#define AS3722_ADC0_MSB_RESULT_REG 0x82 +#define AS3722_ADC0_LSB_RESULT_REG 0x83 +#define AS3722_ADC1_MSB_RESULT_REG 0x84 +#define AS3722_ADC1_LSB_RESULT_REG 0x85 +#define AS3722_ADC1_THRESHOLD_HI_MSB_REG 0x86 +#define AS3722_ADC1_THRESHOLD_HI_LSB_REG 0x87 +#define AS3722_ADC1_THRESHOLD_LO_MSB_REG 0x88 +#define AS3722_ADC1_THRESHOLD_LO_LSB_REG 0x89 +#define AS3722_ADC_CONFIGURATION_REG 0x8A +#define AS3722_ASIC_ID1_REG 0x90 +#define AS3722_ASIC_ID2_REG 0x91 +#define AS3722_LOCK_REG 0x9E +#define AS3722_MAX_REGISTER 0xF4 + +#define AS3722_SD0_EXT_ENABLE_MASK 0x03 +#define AS3722_SD1_EXT_ENABLE_MASK 0x0C +#define AS3722_SD2_EXT_ENABLE_MASK 0x30 +#define AS3722_SD3_EXT_ENABLE_MASK 0xC0 +#define AS3722_SD4_EXT_ENABLE_MASK 0x03 +#define AS3722_SD5_EXT_ENABLE_MASK 0x0C +#define AS3722_SD6_EXT_ENABLE_MASK 0x30 +#define AS3722_LDO0_EXT_ENABLE_MASK 0x03 +#define AS3722_LDO1_EXT_ENABLE_MASK 0x0C +#define AS3722_LDO2_EXT_ENABLE_MASK 0x30 +#define AS3722_LDO3_EXT_ENABLE_MASK 0xC0 +#define AS3722_LDO4_EXT_ENABLE_MASK 0x03 +#define AS3722_LDO5_EXT_ENABLE_MASK 0x0C +#define AS3722_LDO6_EXT_ENABLE_MASK 0x30 +#define AS3722_LDO7_EXT_ENABLE_MASK 0xC0 +#define AS3722_LDO9_EXT_ENABLE_MASK 0x0C +#define AS3722_LDO10_EXT_ENABLE_MASK 0x30 +#define AS3722_LDO11_EXT_ENABLE_MASK 0xC0 + +#define AS3722_OVCURRENT_SD0_ALARM_MASK 0x07 +#define AS3722_OVCURRENT_SD0_ALARM_SHIFT 0x01 +#define AS3722_OVCURRENT_SD0_TRIP_MASK 0x18 +#define AS3722_OVCURRENT_SD0_TRIP_SHIFT 0x03 +#define AS3722_OVCURRENT_SD1_TRIP_MASK 0x60 +#define AS3722_OVCURRENT_SD1_TRIP_SHIFT 0x05 + +#define AS3722_OVCURRENT_SD6_ALARM_MASK 0x07 +#define AS3722_OVCURRENT_SD6_ALARM_SHIFT 0x01 +#define AS3722_OVCURRENT_SD6_TRIP_MASK 0x18 +#define AS3722_OVCURRENT_SD6_TRIP_SHIFT 0x03 + +/* AS3722 register bits and bit masks */ +#define AS3722_LDO_ILIMIT_MASK BIT(7) +#define AS3722_LDO_ILIMIT_BIT BIT(7) +#define AS3722_LDO0_VSEL_MASK 0x1F +#define AS3722_LDO0_VSEL_MIN 0x01 +#define AS3722_LDO0_VSEL_MAX 0x12 +#define AS3722_LDO0_NUM_VOLT 0x12 +#define AS3722_LDO3_VSEL_MASK 0x3F +#define AS3722_LDO3_VSEL_MIN 0x01 +#define AS3722_LDO3_VSEL_MAX 0x2D +#define AS3722_LDO3_NUM_VOLT 0x2D +#define AS3722_LDO_VSEL_MASK 0x7F +#define AS3722_LDO_VSEL_MIN 0x01 +#define AS3722_LDO_VSEL_MAX 0x7F +#define AS3722_LDO_VSEL_DNU_MIN 0x25 +#define AS3722_LDO_VSEL_DNU_MAX 0x3F +#define AS3722_LDO_NUM_VOLT 0x80 + +#define AS3722_LDO0_CTRL BIT(0) +#define AS3722_LDO1_CTRL BIT(1) +#define AS3722_LDO2_CTRL BIT(2) +#define AS3722_LDO3_CTRL BIT(3) +#define AS3722_LDO4_CTRL BIT(4) +#define AS3722_LDO5_CTRL BIT(5) +#define AS3722_LDO6_CTRL BIT(6) +#define AS3722_LDO7_CTRL BIT(7) +#define AS3722_LDO9_CTRL BIT(1) +#define AS3722_LDO10_CTRL BIT(2) +#define AS3722_LDO11_CTRL BIT(3) + +#define AS3722_LDO3_MODE_MASK (3 << 6) +#define AS3722_LDO3_MODE_VAL(n) (((n) & 0x3) << 6) +#define AS3722_LDO3_MODE_PMOS AS3722_LDO3_MODE_VAL(0) +#define AS3722_LDO3_MODE_PMOS_TRACKING AS3722_LDO3_MODE_VAL(1) +#define AS3722_LDO3_MODE_NMOS AS3722_LDO3_MODE_VAL(2) +#define AS3722_LDO3_MODE_SWITCH AS3722_LDO3_MODE_VAL(3) + +#define AS3722_SD_VSEL_MASK 0x7F +#define AS3722_SD0_VSEL_MIN 0x01 +#define AS3722_SD0_VSEL_MAX 0x5A +#define AS3722_SD2_VSEL_MIN 0x01 +#define AS3722_SD2_VSEL_MAX 0x7F + +#define AS3722_SDn_CTRL(n) BIT(n) + +#define AS3722_SD0_MODE_FAST BIT(4) +#define AS3722_SD1_MODE_FAST BIT(4) +#define AS3722_SD2_MODE_FAST BIT(2) +#define AS3722_SD3_MODE_FAST BIT(6) +#define AS3722_SD4_MODE_FAST BIT(2) +#define AS3722_SD5_MODE_FAST BIT(2) +#define AS3722_SD6_MODE_FAST BIT(4) + +#define AS3722_POWER_OFF BIT(1) + +#define AS3722_INTERRUPT_MASK1_LID BIT(0) +#define AS3722_INTERRUPT_MASK1_ACOK BIT(1) +#define AS3722_INTERRUPT_MASK1_ENABLE1 BIT(2) +#define AS3722_INTERRUPT_MASK1_OCURR_ALARM_SD0 BIT(3) +#define AS3722_INTERRUPT_MASK1_ONKEY_LONG BIT(4) +#define AS3722_INTERRUPT_MASK1_ONKEY BIT(5) +#define AS3722_INTERRUPT_MASK1_OVTMP BIT(6) +#define AS3722_INTERRUPT_MASK1_LOWBAT BIT(7) + +#define AS3722_INTERRUPT_MASK2_SD0_LV BIT(0) +#define AS3722_INTERRUPT_MASK2_SD1_LV BIT(1) +#define AS3722_INTERRUPT_MASK2_SD2345_LV BIT(2) +#define AS3722_INTERRUPT_MASK2_PWM1_OV_PROT BIT(3) +#define AS3722_INTERRUPT_MASK2_PWM2_OV_PROT BIT(4) +#define AS3722_INTERRUPT_MASK2_ENABLE2 BIT(5) +#define AS3722_INTERRUPT_MASK2_SD6_LV BIT(6) +#define AS3722_INTERRUPT_MASK2_RTC_REP BIT(7) + +#define AS3722_INTERRUPT_MASK3_RTC_ALARM BIT(0) +#define AS3722_INTERRUPT_MASK3_GPIO1 BIT(1) +#define AS3722_INTERRUPT_MASK3_GPIO2 BIT(2) +#define AS3722_INTERRUPT_MASK3_GPIO3 BIT(3) +#define AS3722_INTERRUPT_MASK3_GPIO4 BIT(4) +#define AS3722_INTERRUPT_MASK3_GPIO5 BIT(5) +#define AS3722_INTERRUPT_MASK3_WATCHDOG BIT(6) +#define AS3722_INTERRUPT_MASK3_ENABLE3 BIT(7) + +#define AS3722_INTERRUPT_MASK4_TEMP_SD0_SHUTDOWN BIT(0) +#define AS3722_INTERRUPT_MASK4_TEMP_SD1_SHUTDOWN BIT(1) +#define AS3722_INTERRUPT_MASK4_TEMP_SD6_SHUTDOWN BIT(2) +#define AS3722_INTERRUPT_MASK4_TEMP_SD0_ALARM BIT(3) +#define AS3722_INTERRUPT_MASK4_TEMP_SD1_ALARM BIT(4) +#define AS3722_INTERRUPT_MASK4_TEMP_SD6_ALARM BIT(5) +#define AS3722_INTERRUPT_MASK4_OCCUR_ALARM_SD6 BIT(6) +#define AS3722_INTERRUPT_MASK4_ADC BIT(7) + +#define AS3722_ADC1_INTERVAL_TIME BIT(0) +#define AS3722_ADC1_INT_MODE_ON BIT(1) +#define AS3722_ADC_BUF_ON BIT(2) +#define AS3722_ADC1_LOW_VOLTAGE_RANGE BIT(5) +#define AS3722_ADC1_INTEVAL_SCAN BIT(6) +#define AS3722_ADC1_INT_MASK BIT(7) + +#define AS3722_ADC_MSB_VAL_MASK 0x7F +#define AS3722_ADC_LSB_VAL_MASK 0x07 + +#define AS3722_ADC0_CONV_START BIT(7) +#define AS3722_ADC0_CONV_NOTREADY BIT(7) +#define AS3722_ADC0_SOURCE_SELECT_MASK 0x1F + +#define AS3722_ADC1_CONV_START BIT(7) +#define AS3722_ADC1_CONV_NOTREADY BIT(7) +#define AS3722_ADC1_SOURCE_SELECT_MASK 0x1F + +/* GPIO modes */ +#define AS3722_GPIO_MODE_MASK 0x07 +#define AS3722_GPIO_MODE_INPUT 0x00 +#define AS3722_GPIO_MODE_OUTPUT_VDDH 0x01 +#define AS3722_GPIO_MODE_IO_OPEN_DRAIN 0x02 +#define AS3722_GPIO_MODE_ADC_IN 0x03 +#define AS3722_GPIO_MODE_INPUT_PULL_UP 0x04 +#define AS3722_GPIO_MODE_INPUT_PULL_DOWN 0x05 +#define AS3722_GPIO_MODE_IO_OPEN_DRAIN_PULL_UP 0x06 +#define AS3722_GPIO_MODE_OUTPUT_VDDL 0x07 +#define AS3722_GPIO_MODE_VAL(n) ((n) & AS3722_GPIO_MODE_MASK) + +#define AS3722_GPIO_INV BIT(7) +#define AS3722_GPIO_IOSF_MASK 0x78 +#define AS3722_GPIO_IOSF_VAL(n) (((n) & 0xF) << 3) +#define AS3722_GPIO_IOSF_NORMAL AS3722_GPIO_IOSF_VAL(0) +#define AS3722_GPIO_IOSF_INTERRUPT_OUT AS3722_GPIO_IOSF_VAL(1) +#define AS3722_GPIO_IOSF_VSUP_LOW_OUT AS3722_GPIO_IOSF_VAL(2) +#define AS3722_GPIO_IOSF_GPIO_INTERRUPT_IN AS3722_GPIO_IOSF_VAL(3) +#define AS3722_GPIO_IOSF_ISINK_PWM_IN AS3722_GPIO_IOSF_VAL(4) +#define AS3722_GPIO_IOSF_VOLTAGE_STBY AS3722_GPIO_IOSF_VAL(5) +#define AS3722_GPIO_IOSF_PWR_GOOD_OUT AS3722_GPIO_IOSF_VAL(7) +#define AS3722_GPIO_IOSF_Q32K_OUT AS3722_GPIO_IOSF_VAL(8) +#define AS3722_GPIO_IOSF_WATCHDOG_IN AS3722_GPIO_IOSF_VAL(9) +#define AS3722_GPIO_IOSF_SOFT_RESET_IN AS3722_GPIO_IOSF_VAL(11) +#define AS3722_GPIO_IOSF_PWM_OUT AS3722_GPIO_IOSF_VAL(12) +#define AS3722_GPIO_IOSF_VSUP_LOW_DEB_OUT AS3722_GPIO_IOSF_VAL(13) +#define AS3722_GPIO_IOSF_SD6_LOW_VOLT_LOW AS3722_GPIO_IOSF_VAL(14) + +#define AS3722_GPIOn_SIGNAL(n) BIT(n) +#define AS3722_GPIOn_CONTROL_REG(n) (AS3722_GPIO0_CONTROL_REG + n) +#define AS3722_I2C_PULL_UP BIT(4) +#define AS3722_INT_PULL_UP BIT(5) + +#define AS3722_RTC_REP_WAKEUP_EN BIT(0) +#define AS3722_RTC_ALARM_WAKEUP_EN BIT(1) +#define AS3722_RTC_ON BIT(2) +#define AS3722_RTC_IRQMODE BIT(3) +#define AS3722_RTC_CLK32K_OUT_EN BIT(5) + +#define AS3722_WATCHDOG_TIMER_MAX 0x7F +#define AS3722_WATCHDOG_ON BIT(0) +#define AS3722_WATCHDOG_SW_SIG BIT(0) + +#define AS3722_EXT_CONTROL_ENABLE1 0x1 +#define AS3722_EXT_CONTROL_ENABLE2 0x2 +#define AS3722_EXT_CONTROL_ENABLE3 0x3 + +/* Interrupt IDs */ +enum as3722_irq { + AS3722_IRQ_LID, + AS3722_IRQ_ACOK, + AS3722_IRQ_ENABLE1, + AS3722_IRQ_OCCUR_ALARM_SD0, + AS3722_IRQ_ONKEY_LONG_PRESS, + AS3722_IRQ_ONKEY, + AS3722_IRQ_OVTMP, + AS3722_IRQ_LOWBAT, + AS3722_IRQ_SD0_LV, + AS3722_IRQ_SD1_LV, + AS3722_IRQ_SD2_LV, + AS3722_IRQ_PWM1_OV_PROT, + AS3722_IRQ_PWM2_OV_PROT, + AS3722_IRQ_ENABLE2, + AS3722_IRQ_SD6_LV, + AS3722_IRQ_RTC_REP, + AS3722_IRQ_RTC_ALARM, + AS3722_IRQ_GPIO1, + AS3722_IRQ_GPIO2, + AS3722_IRQ_GPIO3, + AS3722_IRQ_GPIO4, + AS3722_IRQ_GPIO5, + AS3722_IRQ_WATCHDOG, + AS3722_IRQ_ENABLE3, + AS3722_IRQ_TEMP_SD0_SHUTDOWN, + AS3722_IRQ_TEMP_SD1_SHUTDOWN, + AS3722_IRQ_TEMP_SD2_SHUTDOWN, + AS3722_IRQ_TEMP_SD0_ALARM, + AS3722_IRQ_TEMP_SD1_ALARM, + AS3722_IRQ_TEMP_SD6_ALARM, + AS3722_IRQ_OCCUR_ALARM_SD6, + AS3722_IRQ_ADC, + AS3722_IRQ_MAX, +}; + +struct as3722 { + struct device *dev; + struct regmap *regmap; + int chip_irq; + unsigned long irq_flags; + bool en_intern_int_pullup; + bool en_intern_i2c_pullup; + struct regmap_irq_chip_data *irq_data; +}; + +static inline int as3722_read(struct as3722 *as3722, u32 reg, u32 *dest) +{ + return regmap_read(as3722->regmap, reg, dest); +} + +static inline int as3722_write(struct as3722 *as3722, u32 reg, u32 value) +{ + return regmap_write(as3722->regmap, reg, value); +} + +static inline int as3722_block_read(struct as3722 *as3722, u32 reg, + int count, u8 *buf) +{ + return regmap_bulk_read(as3722->regmap, reg, buf, count); +} + +static inline int as3722_block_write(struct as3722 *as3722, u32 reg, + int count, u8 *data) +{ + return regmap_bulk_write(as3722->regmap, reg, data, count); +} + +static inline int as3722_update_bits(struct as3722 *as3722, u32 reg, + u32 mask, u8 val) +{ + return regmap_update_bits(as3722->regmap, reg, mask, val); +} + +static inline int as3722_irq_get_virq(struct as3722 *as3722, int irq) +{ + return regmap_irq_get_virq(as3722->irq_data, irq); +} +#endif /* __LINUX_MFD_AS3722_H__ */ |