diff options
| -rw-r--r-- | arch/x86/pci/acpi.c | 10 | ||||
| -rw-r--r-- | drivers/pci/host/pci-xgene-msi.c | 2 | ||||
| -rw-r--r-- | drivers/pci/host/pcie-designware.c | 10 | ||||
| -rw-r--r-- | drivers/pci/probe.c | 12 |
4 files changed, 23 insertions, 11 deletions
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 3cd69832d7f4..3961103e9176 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -114,6 +114,16 @@ static const struct dmi_system_id pci_crs_quirks[] __initconst = { DMI_MATCH(DMI_BIOS_VERSION, "6JET85WW (1.43 )"), }, }, + /* https://bugzilla.kernel.org/show_bug.cgi?id=42606 */ + { + .callback = set_nouse_crs, + .ident = "Supermicro X8DTH", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"), + DMI_MATCH(DMI_PRODUCT_NAME, "X8DTH-i/6/iF/6F"), + DMI_MATCH(DMI_BIOS_VERSION, "2.0a"), + }, + }, /* https://bugzilla.kernel.org/show_bug.cgi?id=15362 */ { diff --git a/drivers/pci/host/pci-xgene-msi.c b/drivers/pci/host/pci-xgene-msi.c index 1f38d0836751..f1b633bce525 100644 --- a/drivers/pci/host/pci-xgene-msi.c +++ b/drivers/pci/host/pci-xgene-msi.c @@ -517,7 +517,7 @@ static int xgene_msi_probe(struct platform_device *pdev) rc = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "pci/xgene:online", xgene_msi_hwirq_alloc, NULL); - if (rc) + if (rc < 0) goto err_cpuhp; pci_xgene_online = rc; rc = cpuhp_setup_state(CPUHP_PCI_XGENE_DEAD, "pci/xgene:dead", NULL, diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c index bed19994c1e9..af8f6e92e885 100644 --- a/drivers/pci/host/pcie-designware.c +++ b/drivers/pci/host/pcie-designware.c @@ -807,11 +807,6 @@ void dw_pcie_setup_rc(struct pcie_port *pp) { u32 val; - /* get iATU unroll support */ - pp->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pp); - dev_dbg(pp->dev, "iATU unroll: %s\n", - pp->iatu_unroll_enabled ? "enabled" : "disabled"); - /* set the number of lanes */ val = dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL); val &= ~PORT_LINK_MODE_MASK; @@ -882,6 +877,11 @@ void dw_pcie_setup_rc(struct pcie_port *pp) * we should not program the ATU here. */ if (!pp->ops->rd_other_conf) { + /* get iATU unroll support */ + pp->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pp); + dev_dbg(pp->dev, "iATU unroll: %s\n", + pp->iatu_unroll_enabled ? "enabled" : "disabled"); + dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX0, PCIE_ATU_TYPE_MEM, pp->mem_base, pp->mem_bus_addr, pp->mem_size); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index e164b5c9f0f0..204960e70333 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1169,6 +1169,7 @@ void set_pcie_port_type(struct pci_dev *pdev) pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); if (!pos) return; + pdev->pcie_cap = pos; pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16); pdev->pcie_flags_reg = reg16; @@ -1176,13 +1177,14 @@ void set_pcie_port_type(struct pci_dev *pdev) pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD; /* - * A Root Port is always the upstream end of a Link. No PCIe - * component has two Links. Two Links are connected by a Switch - * that has a Port on each Link and internal logic to connect the - * two Ports. + * A Root Port or a PCI-to-PCIe bridge is always the upstream end + * of a Link. No PCIe component has two Links. Two Links are + * connected by a Switch that has a Port on each Link and internal + * logic to connect the two Ports. */ type = pci_pcie_type(pdev); - if (type == PCI_EXP_TYPE_ROOT_PORT) + if (type == PCI_EXP_TYPE_ROOT_PORT || + type == PCI_EXP_TYPE_PCIE_BRIDGE) pdev->has_secondary_link = 1; else if (type == PCI_EXP_TYPE_UPSTREAM || type == PCI_EXP_TYPE_DOWNSTREAM) { |