summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/usb/da8xx-usb.txt41
-rw-r--r--arch/arm/plat-samsung/devs.c1
-rw-r--r--drivers/dma/Kconfig7
-rw-r--r--drivers/dma/amba-pl08x.c20
-rw-r--r--drivers/dma/cppi41.c168
-rw-r--r--drivers/dma/dmatest.c11
-rw-r--r--drivers/dma/imx-sdma.c19
-rw-r--r--drivers/dma/ioat/init.c4
-rw-r--r--drivers/dma/mv_xor.c9
-rw-r--r--drivers/dma/pl330.c42
-rw-r--r--drivers/dma/qcom/hidma.c15
-rw-r--r--drivers/dma/qcom/hidma_ll.c6
-rw-r--r--drivers/dma/sh/rcar-dmac.c52
-rw-r--r--drivers/dma/stm32-dma.c2
-rw-r--r--drivers/dma/sun4i-dma.c2
-rw-r--r--drivers/dma/virt-dma.c11
-rw-r--r--drivers/dma/xilinx/xilinx_dma.c63
-rw-r--r--include/linux/amba/pl080.h50
-rw-r--r--include/linux/amba/pl330.h35
-rw-r--r--lib/dma-debug.c4
20 files changed, 304 insertions, 258 deletions
diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
index ccb844aba7d4..717c5f656237 100644
--- a/Documentation/devicetree/bindings/usb/da8xx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
@@ -18,10 +18,26 @@ Required properties:
- phy-names: Should be "usb-phy"
+ - dmas: specifies the dma channels
+
+ - dma-names: specifies the names of the channels. Use "rxN" for receive
+ and "txN" for transmit endpoints. N specifies the endpoint number.
+
Optional properties:
~~~~~~~~~~~~~~~~~~~~
- vbus-supply: Phandle to a regulator providing the USB bus power.
+DMA
+~~~
+- compatible: ti,da830-cppi41
+- reg: offset and length of the following register spaces: CPPI DMA Controller,
+ CPPI DMA Scheduler, Queue Manager
+- reg-names: "controller", "scheduler", "queuemgr"
+- #dma-cells: should be set to 2. The first number represents the
+ channel number (0 … 3 for endpoints 1 … 4).
+ The second number is 0 for RX and 1 for TX transfers.
+- #dma-channels: should be set to 4 representing the 4 endpoints.
+
Example:
usb_phy: usb-phy {
compatible = "ti,da830-usb-phy";
@@ -30,7 +46,10 @@ Example:
};
usb0: usb@200000 {
compatible = "ti,da830-musb";
- reg = <0x00200000 0x10000>;
+ reg = <0x00200000 0x1000>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
interrupts = <58>;
interrupt-names = "mc";
@@ -39,5 +58,25 @@ Example:
phys = <&usb_phy 0>;
phy-names = "usb-phy";
+ dmas = <&cppi41dma 0 0 &cppi41dma 1 0
+ &cppi41dma 2 0 &cppi41dma 3 0
+ &cppi41dma 0 1 &cppi41dma 1 1
+ &cppi41dma 2 1 &cppi41dma 3 1>;
+ dma-names =
+ "rx1", "rx2", "rx3", "rx4",
+ "tx1", "tx2", "tx3", "tx4";
+
status = "okay";
+
+ cppi41dma: dma-controller@201000 {
+ compatible = "ti,da830-cppi41";
+ reg = <0x201000 0x1000
+ 0x202000 0x1000
+ 0x204000 0x4000>;
+ reg-names = "controller", "scheduler", "queuemgr";
+ interrupts = <58>;
+ #dma-cells = <2>;
+ #dma-channels = <4>;
+ };
+
};
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 03fac123676d..dc269d9143bc 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -10,7 +10,6 @@
* published by the Free Software Foundation.
*/
-#include <linux/amba/pl330.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index d01d59812cf3..24e8597b2c3e 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -514,12 +514,12 @@ config TIMB_DMA
Enable support for the Timberdale FPGA DMA engine.
config TI_CPPI41
- tristate "AM33xx CPPI41 DMA support"
- depends on ARCH_OMAP
+ tristate "CPPI 4.1 DMA support"
+ depends on (ARCH_OMAP || ARCH_DAVINCI_DA8XX)
select DMA_ENGINE
help
The Communications Port Programming Interface (CPPI) 4.1 DMA engine
- is currently used by the USB driver on AM335x platforms.
+ is currently used by the USB driver on AM335x and DA8xx platforms.
config TI_DMA_CROSSBAR
bool
@@ -608,6 +608,7 @@ config ASYNC_TX_DMA
config DMATEST
tristate "DMA Test client"
depends on DMA_ENGINE
+ select DMA_ENGINE_RAID
help
Simple DMA test client. Say N unless you're debugging a
DMA Device driver.
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index 0b7c6ce629a6..6bb8813ca275 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -106,6 +106,7 @@ struct pl08x_driver_data;
/**
* struct vendor_data - vendor-specific config parameters for PL08x derivatives
+ * @config_offset: offset to the configuration register
* @channels: the number of channels available in this variant
* @signals: the number of request signals available from the hardware
* @dualmaster: whether this version supports dual AHB masters or not.
@@ -145,6 +146,8 @@ struct pl08x_bus_data {
/**
* struct pl08x_phy_chan - holder for the physical channels
* @id: physical index to this channel
+ * @base: memory base address for this physical channel
+ * @reg_config: configuration address for this physical channel
* @lock: a lock to use when altering an instance of this struct
* @serving: the virtual channel currently being served by this physical
* channel
@@ -203,7 +206,7 @@ struct pl08x_txd {
};
/**
- * struct pl08x_dma_chan_state - holds the PL08x specific virtual channel
+ * enum pl08x_dma_chan_state - holds the PL08x specific virtual channel
* states
* @PL08X_CHAN_IDLE: the channel is idle
* @PL08X_CHAN_RUNNING: the channel has allocated a physical transport
@@ -226,9 +229,8 @@ enum pl08x_dma_chan_state {
* @phychan: the physical channel utilized by this channel, if there is one
* @name: name of channel
* @cd: channel platform data
- * @runtime_addr: address for RX/TX according to the runtime config
+ * @cfg: slave configuration
* @at: active transaction on this channel
- * @lock: a lock for this channel data
* @host: a pointer to the host (internal use)
* @state: whether the channel is idle, paused, running etc
* @slave: whether this channel is a device (slave) or for memcpy
@@ -262,7 +264,7 @@ struct pl08x_dma_chan {
* @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI
* fetches
* @mem_buses: set to indicate memory transfers on AHB2.
- * @lock: a spinlock for this struct
+ * @lli_words: how many words are used in each LLI item for this variant
*/
struct pl08x_driver_data {
struct dma_device slave;
@@ -417,7 +419,7 @@ static void pl08x_start_next_txd(struct pl08x_dma_chan *plchan)
/* Enable the DMA channel */
/* Do not access config register until channel shows as disabled */
- while (readl(pl08x->base + PL080_EN_CHAN) & (1 << phychan->id))
+ while (readl(pl08x->base + PL080_EN_CHAN) & BIT(phychan->id))
cpu_relax();
/* Do not access config register until channel shows as inactive */
@@ -484,8 +486,8 @@ static void pl08x_terminate_phy_chan(struct pl08x_driver_data *pl08x,
writel(val, ch->reg_config);
- writel(1 << ch->id, pl08x->base + PL080_ERR_CLEAR);
- writel(1 << ch->id, pl08x->base + PL080_TC_CLEAR);
+ writel(BIT(ch->id), pl08x->base + PL080_ERR_CLEAR);
+ writel(BIT(ch->id), pl08x->base + PL080_TC_CLEAR);
}
static inline u32 get_bytes_in_cctl(u32 cctl)
@@ -1834,7 +1836,7 @@ static irqreturn_t pl08x_irq(int irq, void *dev)
return IRQ_NONE;
for (i = 0; i < pl08x->vd->channels; i++) {
- if (((1 << i) & err) || ((1 << i) & tc)) {
+ if ((BIT(i) & err) || (BIT(i) & tc)) {
/* Locate physical channel */
struct pl08x_phy_chan *phychan = &pl08x->phy_chans[i];
struct pl08x_dma_chan *plchan = phychan->serving;
@@ -1872,7 +1874,7 @@ static irqreturn_t pl08x_irq(int irq, void *dev)
}
spin_unlock(&plchan->vc.lock);
- mask |= (1 << i);
+ mask |= BIT(i);
}
}
diff --git a/drivers/dma/cppi41.c b/drivers/dma/cppi41.c
index d74cee077842..f7e965f63274 100644
--- a/drivers/dma/cppi41.c
+++ b/drivers/dma/cppi41.c
@@ -68,7 +68,6 @@
#define QMGR_MEMCTRL_IDX_SH 16
#define QMGR_MEMCTRL_DESC_SH 8
-#define QMGR_NUM_PEND 5
#define QMGR_PEND(x) (0x90 + (x) * 4)
#define QMGR_PENDING_SLOT_Q(x) (x / 32)
@@ -131,7 +130,6 @@ struct cppi41_dd {
u32 first_td_desc;
struct cppi41_channel *chan_busy[ALLOC_DECS_NUM];
- void __iomem *usbss_mem;
void __iomem *ctrl_mem;
void __iomem *sched_mem;
void __iomem *qmgr_mem;
@@ -139,6 +137,10 @@ struct cppi41_dd {
const struct chan_queues *queues_rx;
const struct chan_queues *queues_tx;
struct chan_queues td_queue;
+ u16 first_completion_queue;
+ u16 qmgr_num_pend;
+ u32 n_chans;
+ u8 platform;
struct list_head pending; /* Pending queued transfers */
spinlock_t lock; /* Lock for pending list */
@@ -149,8 +151,7 @@ struct cppi41_dd {
bool is_suspended;
};
-#define FIST_COMPLETION_QUEUE 93
-static struct chan_queues usb_queues_tx[] = {
+static struct chan_queues am335x_usb_queues_tx[] = {
/* USB0 ENDP 1 */
[ 0] = { .submit = 32, .complete = 93},
[ 1] = { .submit = 34, .complete = 94},
@@ -186,7 +187,7 @@ static struct chan_queues usb_queues_tx[] = {
[29] = { .submit = 90, .complete = 139},
};
-static const struct chan_queues usb_queues_rx[] = {
+static const struct chan_queues am335x_usb_queues_rx[] = {
/* USB0 ENDP 1 */
[ 0] = { .submit = 1, .complete = 109},
[ 1] = { .submit = 2, .complete = 110},
@@ -222,11 +223,26 @@ static const struct chan_queues usb_queues_rx[] = {
[29] = { .submit = 30, .complete = 155},
};
+static const struct chan_queues da8xx_usb_queues_tx[] = {
+ [0] = { .submit = 16, .complete = 24},
+ [1] = { .submit = 18, .complete = 24},
+ [2] = { .submit = 20, .complete = 24},
+ [3] = { .submit = 22, .complete = 24},
+};
+
+static const struct chan_queues da8xx_usb_queues_rx[] = {
+ [0] = { .submit = 1, .complete = 26},
+ [1] = { .submit = 3, .complete = 26},
+ [2] = { .submit = 5, .complete = 26},
+ [3] = { .submit = 7, .complete = 26},
+};
+
struct cppi_glue_infos {
- irqreturn_t (*isr)(int irq, void *data);
const struct chan_queues *queues_rx;
const struct chan_queues *queues_tx;
struct chan_queues td_queue;
+ u16 first_completion_queue;
+ u16 qmgr_num_pend;
};
static struct cppi41_channel *to_cpp41_chan(struct dma_chan *c)
@@ -285,19 +301,21 @@ static u32 cppi41_pop_desc(struct cppi41_dd *cdd, unsigned queue_num)
static irqreturn_t cppi41_irq(int irq, void *data)
{
struct cppi41_dd *cdd = data;
+ u16 first_completion_queue = cdd->first_completion_queue;
+ u16 qmgr_num_pend = cdd->qmgr_num_pend;
struct cppi41_channel *c;
int i;
- for (i = QMGR_PENDING_SLOT_Q(FIST_COMPLETION_QUEUE); i < QMGR_NUM_PEND;
+ for (i = QMGR_PENDING_SLOT_Q(first_completion_queue); i < qmgr_num_pend;
i++) {
u32 val;
u32 q_num;
val = cppi_readl(cdd->qmgr_mem + QMGR_PEND(i));
- if (i == QMGR_PENDING_SLOT_Q(FIST_COMPLETION_QUEUE) && val) {
+ if (i == QMGR_PENDING_SLOT_Q(first_completion_queue) && val) {
u32 mask;
/* set corresponding bit for completetion Q 93 */
- mask = 1 << QMGR_PENDING_BIT_Q(FIST_COMPLETION_QUEUE);
+ mask = 1 << QMGR_PENDING_BIT_Q(first_completion_queue);
/* not set all bits for queues less than Q 93 */
mask--;
/* now invert and keep only Q 93+ set */
@@ -402,11 +420,9 @@ static enum dma_status cppi41_dma_tx_status(struct dma_chan *chan,
struct cppi41_channel *c = to_cpp41_chan(chan);
enum dma_status ret;
- /* lock */
ret = dma_cookie_status(chan, cookie, txstate);
- if (txstate && ret == DMA_COMPLETE)
- txstate->residue = c->residue;
- /* unlock */
+
+ dma_set_residue(txstate, c->residue);
return ret;
}
@@ -630,7 +646,7 @@ static int cppi41_tear_down_chan(struct cppi41_channel *c)
if (!c->is_tx) {
reg |= GCR_STARV_RETRY;
reg |= GCR_DESC_TYPE_HOST;
- reg |= c->q_comp_num;
+ reg |= cdd->td_queue.complete;
}
reg |= GCR_TEARDOWN;
cppi_writel(reg, c->gcr_reg);
@@ -641,7 +657,7 @@ static int cppi41_tear_down_chan(struct cppi41_channel *c)
if (!c->td_seen || !c->td_desc_seen) {
desc_phys = cppi41_pop_desc(cdd, cdd->td_queue.complete);
- if (!desc_phys)
+ if (!desc_phys && c->is_tx)
desc_phys = cppi41_pop_desc(cdd, c->q_comp_num);
if (desc_phys == c->desc_phys) {
@@ -723,39 +739,24 @@ static int cppi41_stop_chan(struct dma_chan *chan)
return 0;
}
-static void cleanup_chans(struct cppi41_dd *cdd)
-{
- while (!list_empty(&cdd->ddev.channels)) {
- struct cppi41_channel *cchan;
-
- cchan = list_first_entry(&cdd->ddev.channels,
- struct cppi41_channel, chan.device_node);
- list_del(&cchan->chan.device_node);
- kfree(cchan);
- }
-}
-
static int cppi41_add_chans(struct device *dev, struct cppi41_dd *cdd)
{
- struct cppi41_channel *cchan;
+ struct cppi41_channel *cchan, *chans;
int i;
- int ret;
- u32 n_chans;
+ u32 n_chans = cdd->n_chans;
- ret = of_property_read_u32(dev->of_node, "#dma-channels",
- &n_chans);
- if (ret)
- return ret;
/*
* The channels can only be used as TX or as RX. So we add twice
* that much dma channels because USB can only do RX or TX.
*/
n_chans *= 2;
+ chans = devm_kcalloc(dev, n_chans, sizeof(*chans), GFP_KERNEL);
+ if (!chans)
+ return -ENOMEM;
+
for (i = 0; i < n_chans; i++) {
- cchan = kzalloc(sizeof(*cchan), GFP_KERNEL);
- if (!cchan)
- goto err;
+ cchan = &chans[i];
cchan->cdd = cdd;
if (i & 1) {
@@ -775,9 +776,6 @@ static int cppi41_add_chans(struct device *dev, struct cppi41_dd *cdd)
cdd->first_td_desc = n_chans;
return 0;
-err:
- cleanup_chans(cdd);
- return -ENOMEM;
}
static void purge_descs(struct device *dev, struct cppi41_dd *cdd)
@@ -859,7 +857,7 @@ static void init_sched(struct cppi41_dd *cdd)
word = 0;
cppi_writel(0, cdd->sched_mem + DMA_SCHED_CTRL);
- for (ch = 0; ch < 15 * 2; ch += 2) {
+ for (ch = 0; ch < cdd->n_chans; ch += 2) {
reg = SCHED_ENTRY0_CHAN(ch);
reg |= SCHED_ENTRY1_CHAN(ch) | SCHED_ENTRY1_IS_RX;
@@ -869,7 +867,7 @@ static void init_sched(struct cppi41_dd *cdd)
cppi_writel(reg, cdd->sched_mem + DMA_SCHED_WORD(word));
word++;
}
- reg = 15 * 2 * 2 - 1;
+ reg = cdd->n_chans * 2 - 1;
reg |= DMA_SCHED_CTRL_EN;
cppi_writel(reg, cdd->sched_mem + DMA_SCHED_CTRL);
}
@@ -885,7 +883,7 @@ static int init_cppi41(struct device *dev, struct cppi41_dd *cdd)
return -ENOMEM;
cppi_writel(cdd->scratch_phys, cdd->qmgr_mem + QMGR_LRAM0_BASE);
- cppi_writel(QMGR_SCRATCH_SIZE, cdd->qmgr_mem + QMGR_LRAM_SIZE);
+ cppi_writel(TOTAL_DESCS_NUM, cdd->qmgr_mem + QMGR_LRAM_SIZE);
cppi_writel(0, cdd->qmgr_mem + QMGR_LRAM1_BASE);
ret = init_descs(dev, cdd);
@@ -894,6 +892,7 @@ static int init_cppi41(struct device *dev, struct cppi41_dd *cdd)
cppi_writel(cdd->td_queue.submit, cdd->ctrl_mem + DMA_TDFDQ);
init_sched(cdd);
+
return 0;
err_td:
deinit_cppi41(dev, cdd);
@@ -933,8 +932,9 @@ static bool cpp41_dma_filter_fn(struct dma_chan *chan, void *param)
else
queues = cdd->queues_rx;
- BUILD_BUG_ON(ARRAY_SIZE(usb_queues_rx) != ARRAY_SIZE(usb_queues_tx));
- if (WARN_ON(cchan->port_num > ARRAY_SIZE(usb_queues_rx)))
+ BUILD_BUG_ON(ARRAY_SIZE(am335x_usb_queues_rx) !=
+ ARRAY_SIZE(am335x_usb_queues_tx));
+ if (WARN_ON(cchan->port_num > ARRAY_SIZE(am335x_usb_queues_rx)))
return false;
cchan->q_num = queues[cchan->port_num].submit;
@@ -962,15 +962,25 @@ static struct dma_chan *cppi41_dma_xlate(struct of_phandle_args *dma_spec,
&dma_spec->args[0]);
}
-static const struct cppi_glue_infos usb_infos = {
- .isr = cppi41_irq,
- .queues_rx = usb_queues_rx,
- .queues_tx = usb_queues_tx,
+static const struct cppi_glue_infos am335x_usb_infos = {
+ .queues_rx = am335x_usb_queues_rx,
+ .queues_tx = am335x_usb_queues_tx,
.td_queue = { .submit = 31, .complete = 0 },
+ .first_completion_queue = 93,
+ .qmgr_num_pend = 5,
+};
+
+static const struct cppi_glue_infos da8xx_usb_infos = {
+ .queues_rx = da8xx_usb_queues_rx,
+ .queues_tx = da8xx_usb_queues_tx,
+ .td_queue = { .submit = 31, .complete = 0 },
+ .first_completion_queue = 24,
+ .qmgr_num_pend = 2,
};
static const struct of_device_id cppi41_dma_ids[] = {
- { .compatible = "ti,am3359-cppi41", .data = &usb_infos},
+ { .compatible = "ti,am3359-cppi41", .data = &am335x_usb_infos},
+ { .compatible = "ti,da830-cppi41", .data = &da8xx_usb_infos},
{},
};
MODULE_DEVICE_TABLE(of, cppi41_dma_ids);
@@ -995,6 +1005,8 @@ static int cppi41_dma_probe(struct platform_device *pdev)
struct cppi41_dd *cdd;
struct device *dev = &pdev->dev;
const struct cppi_glue_infos *glue_info;
+ struct resource *mem;
+ int index;
int irq;
int ret;
@@ -1021,19 +1033,31 @@ static int cppi41_dma_probe(struct platform_device *pdev)
INIT_LIST_HEAD(&cdd->ddev.channels);
cpp41_dma_info.dma_cap = cdd->ddev.cap_mask;
- cdd->usbss_mem = of_iomap(dev->of_node, 0);
- cdd->ctrl_mem = of_iomap(dev->of_node, 1);
- cdd->sched_mem = of_iomap(dev->of_node, 2);
- cdd->qmgr_mem = of_iomap(dev->of_node, 3);
+ index = of_property_match_string(dev->of_node,
+ "reg-names", "controller");
+ if (index < 0)
+ return index;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, index);
+ cdd->ctrl_mem = devm_ioremap_resource(dev, mem);
+ if (IS_ERR(cdd->ctrl_mem))
+ return PTR_ERR(cdd->ctrl_mem);
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, index + 1);
+ cdd->sched_mem = devm_ioremap_resource(dev, mem);
+ if (IS_ERR(cdd->sched_mem))
+ return PTR_ERR(cdd->sched_mem);
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, index + 2);
+ cdd->qmgr_mem = devm_ioremap_resource(dev, mem);
+ if (IS_ERR(cdd->qmgr_mem))
+ return PTR_ERR(cdd->qmgr_mem);
+
spin_lock_init(&cdd->lock);
INIT_LIST_HEAD(&cdd->pending);
platform_set_drvdata(pdev, cdd);
- if (!cdd->usbss_mem || !cdd->ctrl_mem || !cdd->sched_mem ||
- !cdd->qmgr_mem)
- return -ENXIO;
-
pm_runtime_enable(dev);
pm_runtime_set_autosuspend_delay(dev, 100);
pm_runtime_use_autosuspend(dev);
@@ -1044,6 +1068,13 @@ static int cppi41_dma_probe(struct platform_device *pdev)
cdd->queues_rx = glue_info->queues_rx;
cdd->queues_tx = glue_info->queues_tx;
cdd->td_queue = glue_info->td_queue;
+ cdd->qmgr_num_pend = glue_info->qmgr_num_pend;
+ cdd->first_completion_queue = glue_info->first_completion_queue;
+
+ ret = of_property_read_u32(dev->of_node,
+ "#dma-channels", &cdd->n_chans);
+ if (ret)
+ goto err_get_n_chans;
ret = init_cppi41(dev, cdd);
if (ret)
@@ -1056,18 +1087,18 @@ static int cppi41_dma_probe(struct platform_device *pdev)
irq = irq_of_parse_and_map(dev->of_node, 0);
if (!irq) {
ret = -EINVAL;
- goto err_irq;
+ goto err_chans;
}
- ret = devm_request_irq(&pdev->dev, irq, glue_info->isr, IRQF_SHARED,
+ ret = devm_request_irq(&pdev->dev, irq, cppi41_irq, IRQF_SHARED,
dev_name(dev), cdd);
if (ret)
- goto err_irq;
+ goto err_chans;
cdd->irq = irq;
ret = dma_async_device_register(&cdd->ddev);
if (ret)
- goto err_dma_reg;
+ goto err_chans;
ret = of_dma_controller_register(dev->of_node,
cppi41_dma_xlate, &cpp41_dma_info);
@@ -1080,20 +1111,14 @@ static int cppi41_dma_probe(struct platform_device *pdev)
return 0;
err_of:
dma_async_device_unregister(&cdd->ddev);
-err_dma_reg:
-err_irq:
- cleanup_chans(cdd);
err_chans:
deinit_cppi41(dev, cdd);
err_init_cppi:
pm_runtime_dont_use_autosuspend(dev);
+err_get_n_chans:
err_get_sync:
pm_runtime_put_sync(dev);
pm_runtime_disable(dev);
- iounmap(cdd->usbss_mem);
- iounmap(cdd->ctrl_mem);
- iounmap(cdd->sched_mem);
- iounmap(cdd->qmgr_mem);
return ret;
}
@@ -1110,12 +1135,7 @@ static int cppi41_dma_remove(struct platform_device *pdev)
dma_async_device_unregister(&cdd->ddev);
devm_free_irq(&pdev->dev, cdd->irq, cdd);
- cleanup_chans(cdd);
deinit_cppi41(&pdev->dev, cdd);
- iounmap(cdd->usbss_mem);
- iounmap(cdd->ctrl_mem);
- iounmap(cdd->sched_mem);
- iounmap(cdd->qmgr_mem);
pm_runtime_dont_use_autosuspend(&pdev->dev);
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index 54d581d407aa..a07ef3d6b3ec 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -535,6 +535,13 @@ static int dmatest_func(void *data)
total_tests++;
+ /* Check if buffer count fits into map count variable (u8) */
+ if ((src_cnt + dst_cnt) >= 255) {
+ pr_err("too many buffers (%d of 255 supported)\n",
+ src_cnt + dst_cnt);
+ break;
+ }
+
if (1 << align > params->buf_size) {
pr_err("%u-byte buffer too small for %d-byte alignment\n",
params->buf_size, 1 << align);
@@ -585,7 +592,7 @@ static int dmatest_func(void *data)
for (i = 0; i < src_cnt; i++) {
void *buf = thread->srcs[i];
struct page *pg = virt_to_page(buf);
- unsigned pg_off = (unsigned long) buf & ~PAGE_MASK;
+ unsigned long pg_off = offset_in_page(buf);
um->addr[i] = dma_map_page(dev->dev, pg, pg_off,
um->len, DMA_TO_DEVICE);
@@ -605,7 +612,7 @@ static int dmatest_func(void *data)
for (i = 0; i < dst_cnt; i++) {
void *buf = thread->dsts[i];
struct page *pg = virt_to_page(buf);
- unsigned pg_off = (unsigned long) buf & ~PAGE_MASK;
+ unsigned long pg_off = offset_in_page(buf);
dsts[i] = dma_map_page(dev->dev, pg, pg_off, um->len,
DMA_BIDIRECTIONAL);
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index d1651a50c349..085993cb2ccc 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -937,6 +937,21 @@ static int sdma_disable_channel(struct dma_chan *chan)
return 0;
}
+static int sdma_disable_channel_with_delay(struct dma_chan *chan)
+{
+ sdma_disable_channel(chan);
+
+ /*
+ * According to NXP R&D team a delay of one BD SDMA cost time
+ * (maximum is 1ms) should be added after disable of the channel
+ * bit, to ensure SDMA core has really been stopped after SDMA
+ * clients call .device_terminate_all.
+ */
+ mdelay(1);
+
+ return 0;
+}
+
static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac)
{
struct sdma_engine *sdma = sdmac->sdma;
@@ -1828,11 +1843,11 @@ static int sdma_probe(struct platform_device *pdev)
sdma->dma_device.device_prep_slave_sg = sdma_prep_slave_sg;
sdma->dma_device.device_prep_dma_cyclic = sdma_prep_dma_cyclic;
sdma->dma_device.device_config = sdma_config;
- sdma->dma_device.device_terminate_all = sdma_disable_channel;
+ sdma->dma_device.device_terminate_all = sdma_disable_channel_with_delay;
sdma->dma_device.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
sdma->dma_device.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
sdma->dma_device.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
- sdma->dma_device.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
+ sdma->dma_device.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
sdma->dma_device.device_issue_pending = sdma_issue_pending;
sdma->dma_device.dev->dma_parms = &sdma->dma_parms;
dma_set_max_seg_size(sdma->dma_device.dev, 65535);
diff --git a/drivers/dma/ioat/init.c b/drivers/dma/ioat/init.c
index cc5259b881d4..6ad4384b3fa8 100644
--- a/drivers/dma/ioat/init.c
+++ b/drivers/dma/ioat/init.c
@@ -760,9 +760,7 @@ ioat_init_channel(struct ioatdma_device *ioat_dma,
dma_cookie_init(&ioat_chan->dma_chan);
list_add_tail(&ioat_chan->dma_chan.device_node, &dma->channels);
ioat_dma->idx[idx] = ioat_chan;
- init_timer(&ioat_chan->timer);
- ioat_chan->timer.function = ioat_timer_event;
- ioat_chan->timer.data = data;
+ setup_timer(&ioat_chan->timer, ioat_timer_event, data);
tasklet_init(&ioat_chan->cleanup_task, ioat_cleanup_event, data);
}
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index 0cb951b743a6..25bc5b103aa2 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -960,7 +960,7 @@ static int mv_chan_memcpy_self_test(struct mv_xor_chan *mv_chan)
}
src_dma = dma_map_page(dma_chan->device->dev, virt_to_page(src),
- (size_t)src & ~PAGE_MASK, PAGE_SIZE,
+ offset_in_page(src), PAGE_SIZE,
DMA_TO_DEVICE);
unmap->addr[0] = src_dma;
@@ -972,7 +972,7 @@ static int mv_chan_memcpy_self_test(struct mv_xor_chan *mv_chan)
unmap->to_cnt = 1;
dest_dma = dma_map_page(dma_chan->device->dev, virt_to_page(dest),
- (size_t)dest & ~PAGE_MASK, PAGE_SIZE,
+ offset_in_page(dest), PAGE_SIZE,
DMA_FROM_DEVICE);
unmap->addr[1] = dest_dma;
@@ -1580,11 +1580,6 @@ static int mv_xor_probe(struct platform_device *pdev)
int irq;
cd = &pdata->channels[i];
- if (!cd) {
- ret = -ENODEV;
- goto err_channel_add;
- }
-
irq = platform_get_irq(pdev, i);
if (irq < 0) {
ret = irq;
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index f37f4978dabb..8b0da7fa520d 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -22,7 +22,6 @@
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/amba/bus.h>
-#include <linux/amba/pl330.h>
#include <linux/scatterlist.h>
#include <linux/of.h>
#include <linux/of_dma.h>
@@ -2077,18 +2076,6 @@ static void pl330_tasklet(unsigned long data)
}
}
-bool pl330_filter(struct dma_chan *chan, void *param)
-{
- u8 *peri_id;
-
- if (chan->device->dev->driver != &pl330_driver.drv)
- return false;
-
- peri_id = chan->private;
- return *peri_id == (unsigned long)param;
-}
-EXPORT_SYMBOL(pl330_filter);
-
static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec,
struct of_dma *ofdma)
{
@@ -2833,7 +2820,6 @@ static SIMPLE_DEV_PM_OPS(pl330_pm, pl330_suspend, pl330_resume);
static int
pl330_probe(struct amba_device *adev, const struct amba_id *id)
{
- struct dma_pl330_platdata *pdat;
struct pl330_config *pcfg;
struct pl330_dmac *pl330;
struct dma_pl330_chan *pch, *_p;
@@ -2843,8 +2829,6 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
int num_chan;
struct device_node *np = adev->dev.of_node;
- pdat = dev_get_platdata(&adev->dev);
-
ret = dma_set_mask_and_coherent(&adev->dev, DMA_BIT_MASK(32));
if (ret)
return ret;
@@ -2857,7 +2841,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
pd = &pl330->ddma;
pd->dev = &adev->dev;
- pl330->mcbufsz = pdat ? pdat->mcbuf_sz : 0;
+ pl330->mcbufsz = 0;
/* get quirk */
for (i = 0; i < ARRAY_SIZE(of_quirks); i++)
@@ -2901,10 +2885,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
INIT_LIST_HEAD(&pd->channels);
/* Initialize channel parameters */
- if (pdat)
- num_chan = max_t(int, pdat->nr_valid_peri, pcfg->num_chan);
- else
- num_chan = max_t(int, pcfg->num_peri, pcfg->num_chan);
+ num_chan = max_t(int, pcfg->num_peri, pcfg->num_chan);
pl330->num_peripherals = num_chan;
@@ -2916,11 +2897,8 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
for (i = 0; i < num_chan; i++) {
pch = &pl330->peripherals[i];
- if (!adev->dev.of_node)
- pch->chan.private = pdat ? &pdat->peri_id[i] : NULL;
- else
- pch->chan.private = adev->dev.of_node;
+ pch->chan.private = adev->dev.of_node;
INIT_LIST_HEAD(&pch->submitted_list);
INIT_LIST_HEAD(&pch->work_list);
INIT_LIST_HEAD(&pch->completed_list);
@@ -2933,15 +2911,11 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
list_add_tail(&pch->chan.device_node, &pd->channels);
}
- if (pdat) {
- pd->cap_mask = pdat->cap_mask;
- } else {
- dma_cap_set(DMA_MEMCPY, pd->cap_mask);
- if (pcfg->num_peri) {
- dma_cap_set(DMA_SLAVE, pd->cap_mask);
- dma_cap_set(DMA_CYCLIC, pd->cap_mask);
- dma_cap_set(DMA_PRIVATE, pd->cap_mask);
- }
+ dma_cap_set(DMA_MEMCPY, pd->cap_mask);
+ if (pcfg->num_peri) {
+ dma_cap_set(DMA_SLAVE, pd->cap_mask);
+ dma_cap_set(DMA_CYCLIC, pd->cap_mask);
+ dma_cap_set(DMA_PRIVATE, pd->cap_mask);
}
pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index 3c982c96b4b7..5072a7d306d4 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -865,6 +865,20 @@ bailout:
return rc;
}
+static void hidma_shutdown(struct platform_device *pdev)
+{
+ struct hidma_dev *dmadev = platform_get_drvdata(pdev);
+
+ dev_info(dmadev->ddev.dev, "HI-DMA engine shutdown\n");
+
+ pm_runtime_get_sync(dmadev->ddev.dev);
+ if (hidma_ll_disable(dmadev->lldev))
+ dev_warn(dmadev->ddev.dev, "channel did not stop\n");
+ pm_runtime_mark_last_busy(dmadev->ddev.dev);
+ pm_runtime_put_autosuspend(dmadev->ddev.dev);
+
+}
+
static int hidma_remove(struct platform_device *pdev)
{
struct hidma_dev *dmadev = platform_get_drvdata(pdev);
@@ -908,6 +922,7 @@ MODULE_DEVICE_TABLE(of, hidma_match);
static struct platform_driver hidma_driver = {
.probe = hidma_probe,
.remove = hidma_remove,
+ .shutdown = hidma_shutdown,
.driver = {
.name = "hidma",
.of_match_table = hidma_match,
diff --git a/drivers/dma/qcom/hidma_ll.c b/drivers/dma/qcom/hidma_ll.c
index 6645bdf0d151..1530a661518d 100644
--- a/drivers/dma/qcom/hidma_ll.c
+++ b/drivers/dma/qcom/hidma_ll.c
@@ -499,6 +499,9 @@ int hidma_ll_enable(struct hidma_lldev *lldev)
lldev->trch_state = HIDMA_CH_ENABLED;
lldev->evch_state = HIDMA_CH_ENABLED;
+ /* enable irqs */
+ writel(ENABLE_IRQS, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
+
return 0;
}
@@ -596,6 +599,9 @@ int hidma_ll_disable(struct hidma_lldev *lldev)
lldev->trch_state = HIDMA_CH_SUSPENDED;
lldev->evch_state = HIDMA_CH_SUSPENDED;
+
+ /* disable interrupts */
+ writel(0, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
return 0;
}
diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c
index 48b22d5c8602..db41795fe42a 100644
--- a/drivers/dma/sh/rcar-dmac.c
+++ b/drivers/dma/sh/rcar-dmac.c
@@ -344,13 +344,19 @@ static void rcar_dmac_chan_start_xfer(struct rcar_dmac_chan *chan)
rcar_dmac_chan_write(chan, RCAR_DMARS, chan->mid_rid);
if (desc->hwdescs.use) {
- struct rcar_dmac_xfer_chunk *chunk;
+ struct rcar_dmac_xfer_chunk *chunk =
+ list_first_entry(&desc->chunks,
+ struct rcar_dmac_xfer_chunk, node);
dev_dbg(chan->chan.device->dev,
"chan%u: queue desc %p: %u@%pad\n",
chan->index, desc, desc->nchunks, &desc->hwdescs.dma);
#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+ rcar_dmac_chan_write(chan, RCAR_DMAFIXSAR,
+ chunk->src_addr >> 32);
+ rcar_dmac_chan_write(chan, RCAR_DMAFIXDAR,
+ chunk->dst_addr >> 32);
rcar_dmac_chan_write(chan, RCAR_DMAFIXDPBASE,
desc->hwdescs.dma >> 32);
#endif
@@ -368,8 +374,6 @@ static void rcar_dmac_chan_start_xfer(struct rcar_dmac_chan *chan)
* should. Initialize it manually with the destination address
* of the first chunk.
*/
- chunk = list_first_entry(&desc->chunks,
- struct rcar_dmac_xfer_chunk, node);
rcar_dmac_chan_write(chan, RCAR_DMADAR,
chunk->dst_addr & 0xffffffff);
@@ -855,8 +859,12 @@ rcar_dmac_chan_prep_sg(struct rcar_dmac_chan *chan, struct scatterlist *sgl,
unsigned int nchunks = 0;
unsigned int max_chunk_size;
unsigned int full_size = 0;
- bool highmem = false;
+ bool cross_boundary = false;
unsigned int i;
+#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+ u32 high_dev_addr;
+ u32 high_mem_addr;
+#endif
desc = rcar_dmac_desc_get(chan);
if (!desc)
@@ -882,6 +890,16 @@ rcar_dmac_chan_prep_sg(struct rcar_dmac_chan *chan, struct scatterlist *sgl,
full_size += len;
+#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+ if (i == 0) {
+ high_dev_addr = dev_addr >> 32;
+ high_mem_addr = mem_addr >> 32;
+ }
+
+ if ((dev_addr >> 32 != high_dev_addr) ||
+ (mem_addr >> 32 != high_mem_addr))
+ cross_boundary = true;
+#endif
while (len) {
unsigned int size = min(len, max_chunk_size);
@@ -890,18 +908,14 @@ rcar_dmac_chan_prep_sg(struct rcar_dmac_chan *chan, struct scatterlist *sgl,
* Prevent individual transfers from crossing 4GB
* boundaries.
*/
- if (dev_addr >> 32 != (dev_addr + size - 1) >> 32)
+ if (dev_addr >> 32 != (dev_addr + size - 1) >> 32) {
size = ALIGN(dev_addr, 1ULL << 32) - dev_addr;
- if (mem_addr >> 32 != (mem_addr + size - 1) >> 32)
+ cross_boundary = true;
+ }
+ if (mem_addr >> 32 != (mem_addr + size - 1) >> 32) {
size = ALIGN(mem_addr, 1ULL << 32) - mem_addr;
-
- /*
- * Check if either of the source or destination address
- * can't be expressed in 32 bits. If so we can't use
- * hardware descriptor lists.
- */
- if (dev_addr >> 32 || mem_addr >> 32)
- highmem = true;
+ cross_boundary = true;
+ }
#endif
chunk = rcar_dmac_xfer_chunk_get(chan);
@@ -943,13 +957,11 @@ rcar_dmac_chan_prep_sg(struct rcar_dmac_chan *chan, struct scatterlist *sgl,
* Use hardware descriptor lists if possible when more than one chunk
* needs to be transferred (otherwise they don't make much sense).
*
- * The highmem check currently covers the whole transfer. As an
- * optimization we could use descriptor lists for consecutive lowmem
- * chunks and direct manual mode for highmem chunks. Whether the
- * performance improvement would be significant enough compared to the
- * additional complexity remains to be investigated.
+ * Source/Destination address should be located in same 4GiB region
+ * in the 40bit address space when it uses Hardware descriptor,
+ * and cross_boundary is checking it.
*/
- desc->hwdescs.use = !highmem && nchunks > 1;
+ desc->hwdescs.use = !cross_boundary && nchunks > 1;
if (desc->hwdescs.use) {
if (rcar_dmac_fill_hwdesc(chan, desc) < 0)
desc->hwdescs.use = false;
diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c
index 49f86cabcfec..786fc8fcc38e 100644
--- a/drivers/dma/stm32-dma.c
+++ b/drivers/dma/stm32-dma.c
@@ -1008,7 +1008,7 @@ static struct dma_chan *stm32_dma_of_xlate(struct of_phandle_args *dma_spec,
c = dma_get_slave_channel(&chan->vchan.chan);
if (!c) {
- dev_err(dev, "No more channel avalaible\n");
+ dev_err(dev, "No more channels available\n");
return NULL;
}
diff --git a/drivers/dma/sun4i-dma.c b/drivers/dma/sun4i-dma.c
index 57aa227bfadb..f4ed3f17607c 100644
--- a/drivers/dma/sun4i-dma.c
+++ b/drivers/dma/sun4i-dma.c
@@ -238,7 +238,7 @@ static struct sun4i_dma_pchan *find_and_use_pchan(struct sun4i_dma_dev *priv,
}
spin_lock_irqsave(&priv->lock, flags);
- for_each_clear_bit_from(i, &priv->pchans_used, max) {
+ for_each_clear_bit_from(i, priv->pchans_used, max) {
pchan = &pchans[i];
pchan->vchan = vchan;
set_bit(i, priv->pchans_used);
diff --git a/drivers/dma/virt-dma.c b/drivers/dma/virt-dma.c
index e47fc9b0944f..545e97279083 100644
--- a/drivers/dma/virt-dma.c
+++ b/drivers/dma/virt-dma.c
@@ -86,7 +86,7 @@ EXPORT_SYMBOL_GPL(vchan_find_desc);
static void vchan_complete(unsigned long arg)
{
struct virt_dma_chan *vc = (struct virt_dma_chan *)arg;
- struct virt_dma_desc *vd;
+ struct virt_dma_desc *vd, *_vd;
struct dmaengine_desc_callback cb;
LIST_HEAD(head);
@@ -103,8 +103,7 @@ static void vchan_complete(unsigned long arg)
dmaengine_desc_callback_invoke(&cb, NULL);
- while (!list_empty(&head)) {
- vd = list_first_entry(&head, struct virt_dma_desc, node);
+ list_for_each_entry_safe(vd, _vd, &head, node) {
dmaengine_desc_get_callback(&vd->tx, &cb);
list_del(&vd->node);
@@ -119,9 +118,9 @@ static void vchan_complete(unsigned long arg)
void vchan_dma_desc_free_list(struct virt_dma_chan *vc, struct list_head *head)
{
- while (!list_empty(head)) {
- struct virt_dma_desc *vd = list_first_entry(head,
- struct virt_dma_desc, node);
+ struct virt_dma_desc *vd, *_vd;
+
+ list_for_each_entry_safe(vd, _vd, head, node) {
if (dmaengine_desc_test_reuse(&vd->tx)) {
list_move_tail(&vd->node, &vc->desc_allocated);
} else {
diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index 8288fe4d17c3..8cf87b1a284b 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -331,6 +331,7 @@ struct xilinx_dma_tx_descriptor {
* @seg_v: Statically allocated segments base
* @cyclic_seg_v: Statically allocated segment base for cyclic transfers
* @start_transfer: Differentiate b/w DMA IP's transfer
+ * @stop_transfer: Differentiate b/w DMA IP's quiesce
*/
struct xilinx_dma_chan {
struct xilinx_dma_device *xdev;
@@ -361,6 +362,7 @@ struct xilinx_dma_chan {
struct xilinx_axidma_tx_segment *seg_v;
struct xilinx_axidma_tx_segment *cyclic_seg_v;
void (*start_transfer)(struct xilinx_dma_chan *chan);
+ int (*stop_transfer)(struct xilinx_dma_chan *chan);
u16 tdest;
};
@@ -946,26 +948,32 @@ static bool xilinx_dma_is_idle(struct xilinx_dma_chan *chan)
}
/**
- * xilinx_dma_halt - Halt DMA channel
+ * xilinx_dma_stop_transfer - Halt DMA channel
* @chan: Driver specific DMA channel
*/
-static void xilinx_dma_halt(struct xilinx_dma_chan *chan)
+static int xilinx_dma_stop_transfer(struct xilinx_dma_chan *chan)
{
- int err;
u32 val;
dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR, XILINX_DMA_DMACR_RUNSTOP);
/* Wait for the hardware to halt */
- err = xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMASR, val,
- (val & XILINX_DMA_DMASR_HALTED), 0,
- XILINX_DMA_LOOP_COUNT);
+ return xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMASR, val,
+ val & XILINX_DMA_DMASR_HALTED, 0,
+ XILINX_DMA_LOOP_COUNT);
+}
- if (err) {
- dev_err(chan->dev, "Cannot stop channel %p: %x\n",
- chan, dma_ctrl_read(chan, XILINX_DMA_REG_DMASR));
- chan->err = true;
- }
+/**
+ * xilinx_cdma_stop_transfer - Wait for the current transfer to complete
+ * @chan: Driver specific DMA channel
+ */
+static int xilinx_cdma_stop_transfer(struct xilinx_dma_chan *chan)
+{
+ u32 val;
+
+ return xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMASR, val,
+ val & XILINX_DMA_DMASR_IDLE, 0,
+ XILINX_DMA_LOOP_COUNT);
}
/**
@@ -1653,7 +1661,7 @@ xilinx_cdma_prep_memcpy(struct dma_chan *dchan, dma_addr_t dma_dst,
{
struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
struct xilinx_dma_tx_descriptor *desc;
- struct xilinx_cdma_tx_segment *segment, *prev;
+ struct xilinx_cdma_tx_segment *segment;
struct xilinx_cdma_desc_hw *hw;
if (!len || len > XILINX_DMA_MAX_TRANS_LEN)
@@ -1680,21 +1688,11 @@ xilinx_cdma_prep_memcpy(struct dma_chan *dchan, dma_addr_t dma_dst,
hw->dest_addr_msb = upper_32_bits(dma_dst);
}
- /* Fill the previous next descriptor with current */
- prev = list_last_entry(&desc->segments,
- struct xilinx_cdma_tx_segment, node);
- prev->hw.next_desc = segment->phys;
-
/* Insert the segment into the descriptor segments list. */
list_add_tail(&segment->node, &desc->segments);
- prev = segment;
-
- /* Link the last hardware descriptor with the first. */
- segment = list_first_entry(&desc->segments,
- struct xilinx_cdma_tx_segment, node);
desc->async_tx.phys = segment->phys;
- prev->hw.next_desc = segment->phys;
+ hw->next_desc = segment->phys;
return &desc->async_tx;
@@ -2003,12 +2001,17 @@ static int xilinx_dma_terminate_all(struct dma_chan *dchan)
{
struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
u32 reg;
+ int err;
if (chan->cyclic)
xilinx_dma_chan_reset(chan);
- /* Halt the DMA engine */
- xilinx_dma_halt(chan);
+ err = chan->stop_transfer(chan);
+ if (err) {
+ dev_err(chan->dev, "Cannot stop channel %p: %x\n",
+ chan, dma_ctrl_read(chan, XILINX_DMA_REG_DMASR));
+ chan->err = true;
+ }
/* Remove and free all of the descriptors in the lists */
xilinx_dma_free_descriptors(chan);
@@ -2397,12 +2400,16 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
return err;
}
- if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA)
+ if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
chan->start_transfer = xilinx_dma_start_transfer;
- else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA)
+ chan->stop_transfer = xilinx_dma_stop_transfer;
+ } else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
chan->start_transfer = xilinx_cdma_start_transfer;
- else
+ chan->stop_transfer = xilinx_cdma_stop_transfer;
+ } else {
chan->start_transfer = xilinx_vdma_start_transfer;
+ chan->stop_transfer = xilinx_dma_stop_transfer;
+ }
/* Initialize the tasklet */
tasklet_init(&chan->tasklet, xilinx_dma_do_tasklet,
diff --git a/include/linux/amba/pl080.h b/include/linux/amba/pl080.h
index 91b84a7f0539..580b5323a717 100644
--- a/include/linux/amba/pl080.h
+++ b/include/linux/amba/pl080.h
@@ -38,24 +38,16 @@
#define PL080_SOFT_LSREQ (0x2C)
#define PL080_CONFIG (0x30)
-#define PL080_CONFIG_M2_BE (1 << 2)
-#define PL080_CONFIG_M1_BE (1 << 1)
-#define PL080_CONFIG_ENABLE (1 << 0)
+#define PL080_CONFIG_M2_BE BIT(2)
+#define PL080_CONFIG_M1_BE BIT(1)
+#define PL080_CONFIG_ENABLE BIT(0)
#define PL080_SYNC (0x34)
/* Per channel configuration registers */
-#define PL080_Cx_STRIDE (0x20)
+/* Per channel configuration registers */
#define PL080_Cx_BASE(x) ((0x100 + (x * 0x20)))
-#define PL080_Cx_SRC_ADDR(x) ((0x100 + (x * 0x20)))
-#define PL080_Cx_DST_ADDR(x) ((0x104 + (x * 0x20)))
-#define PL080_Cx_LLI(x) ((0x108 + (x * 0x20)))
-#define PL080_Cx_CONTROL(x) ((0x10C + (x * 0x20)))
-#define PL080_Cx_CONFIG(x) ((0x110 + (x * 0x20)))
-#define PL080S_Cx_CONTROL2(x) ((0x110 + (x * 0x20)))
-#define PL080S_Cx_CONFIG(x) ((0x114 + (x * 0x20)))
-
#define PL080_CH_SRC_ADDR (0x00)
#define PL080_CH_DST_ADDR (0x04)
#define PL080_CH_LLI (0x08)
@@ -66,18 +58,18 @@
#define PL080_LLI_ADDR_MASK (0x3fffffff << 2)
#define PL080_LLI_ADDR_SHIFT (2)
-#define PL080_LLI_LM_AHB2 (1 << 0)
+#define PL080_LLI_LM_AHB2 BIT(0)
-#define PL080_CONTROL_TC_IRQ_EN (1 << 31)
+#define PL080_CONTROL_TC_IRQ_EN BIT(31)
#define PL080_CONTROL_PROT_MASK (0x7 << 28)
#define PL080_CONTROL_PROT_SHIFT (28)
-#define PL080_CONTROL_PROT_CACHE (1 << 30)
-#define PL080_CONTROL_PROT_BUFF (1 << 29)
-#define PL080_CONTROL_PROT_SYS (1 << 28)
-#define PL080_CONTROL_DST_INCR (1 << 27)
-#define PL080_CONTROL_SRC_INCR (1 << 26)
-#define PL080_CONTROL_DST_AHB2 (1 << 25)
-#define PL080_CONTROL_SRC_AHB2 (1 << 24)
+#define PL080_CONTROL_PROT_CACHE BIT(30)
+#define PL080_CONTROL_PROT_BUFF BIT(29)
+#define PL080_CONTROL_PROT_SYS BIT(28)
+#define PL080_CONTROL_DST_INCR BIT(27)
+#define PL080_CONTROL_SRC_INCR BIT(26)
+#define PL080_CONTROL_DST_AHB2 BIT(25)
+#define PL080_CONTROL_SRC_AHB2 BIT(24)
#define PL080_CONTROL_DWIDTH_MASK (0x7 << 21)
#define PL080_CONTROL_DWIDTH_SHIFT (21)
#define PL080_CONTROL_SWIDTH_MASK (0x7 << 18)
@@ -103,20 +95,20 @@
#define PL080_WIDTH_16BIT (0x1)
#define PL080_WIDTH_32BIT (0x2)
-#define PL080N_CONFIG_ITPROT (1 << 20)
-#define PL080N_CONFIG_SECPROT (1 << 19)
-#define PL080_CONFIG_HALT (1 << 18)
-#define PL080_CONFIG_ACTIVE (1 << 17) /* RO */
-#define PL080_CONFIG_LOCK (1 << 16)
-#define PL080_CONFIG_TC_IRQ_MASK (1 << 15)
-#define PL080_CONFIG_ERR_IRQ_MASK (1 << 14)
+#define PL080N_CONFIG_ITPROT BIT(20)
+#define PL080N_CONFIG_SECPROT BIT(19)
+#define PL080_CONFIG_HALT BIT(18)
+#define PL080_CONFIG_ACTIVE BIT(17) /* RO */
+#define PL080_CONFIG_LOCK BIT(16)
+#define PL080_CONFIG_TC_IRQ_MASK BIT(15)
+#define PL080_CONFIG_ERR_IRQ_MASK BIT(14)
#define PL080_CONFIG_FLOW_CONTROL_MASK (0x7 << 11)
#define PL080_CONFIG_FLOW_CONTROL_SHIFT (11)
#define PL080_CONFIG_DST_SEL_MASK (0xf << 6)
#define PL080_CONFIG_DST_SEL_SHIFT (6)
#define PL080_CONFIG_SRC_SEL_MASK (0xf << 1)
#define PL080_CONFIG_SRC_SEL_SHIFT (1)
-#define PL080_CONFIG_ENABLE (1 << 0)
+#define PL080_CONFIG_ENABLE BIT(0)
#define PL080_FLOW_MEM2MEM (0x0)
#define PL080_FLOW_MEM2PER (0x1)
diff --git a/include/linux/amba/pl330.h b/include/linux/amba/pl330.h
deleted file mode 100644
index fe93758e8403..000000000000
--- a/include/linux/amba/pl330.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* linux/include/linux/amba/pl330.h
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __AMBA_PL330_H_
-#define __AMBA_PL330_H_
-
-#include <linux/dmaengine.h>
-
-struct dma_pl330_platdata {
- /*
- * Number of valid peripherals connected to DMAC.
- * This may be different from the value read from
- * CR0, as the PL330 implementation might have 'holes'
- * in the peri list or the peri could also be reached
- * from another DMAC which the platform prefers.
- */
- u8 nr_valid_peri;
- /* Array of valid peripherals */
- u8 *peri_id;
- /* Operational capabilities */
- dma_cap_mask_t cap_mask;
- /* Bytes to allocate for MC buffer */
- unsigned mcbuf_sz;
-};
-
-extern bool pl330_filter(struct dma_chan *chan, void *param);
-#endif /* __AMBA_PL330_H_ */
diff --git a/lib/dma-debug.c b/lib/dma-debug.c
index fe4d50c992df..ea4cc3dde4f1 100644
--- a/lib/dma-debug.c
+++ b/lib/dma-debug.c
@@ -1498,7 +1498,7 @@ void debug_dma_alloc_coherent(struct device *dev, size_t size,
entry->type = dma_debug_coherent;
entry->dev = dev;
entry->pfn = page_to_pfn(virt_to_page(virt));
- entry->offset = (size_t) virt & ~PAGE_MASK;
+ entry->offset = offset_in_page(virt);
entry->size = size;
entry->dev_addr = dma_addr;
entry->direction = DMA_BIDIRECTIONAL;
@@ -1514,7 +1514,7 @@ void debug_dma_free_coherent(struct device *dev, size_t size,
.type = dma_debug_coherent,
.dev = dev,
.pfn = page_to_pfn(virt_to_page(virt)),
- .offset = (size_t) virt & ~PAGE_MASK,
+ .offset = offset_in_page(virt),
.dev_addr = addr,
.size = size,
.direction = DMA_BIDIRECTIONAL,
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 19:01:26 +0000