summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/char/pcmcia/cm4000_cs.c73
-rw-r--r--drivers/char/pcmcia/cm4040_cs.c76
-rw-r--r--drivers/parport/parport_cs.c73
-rw-r--r--drivers/serial/serial_cs.c262
-rw-r--r--drivers/telephony/ixj_pcmcia.c76
-rw-r--r--drivers/usb/host/sl811_cs.c140
6 files changed, 299 insertions, 401 deletions
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index f070ae7bd91a..47adec480bd1 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -1759,65 +1759,40 @@ static void cmm_cm4000_release(struct pcmcia_device * link)
/*==== Interface to PCMCIA Layer =======================================*/
+static int cm4000_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ void *priv_data)
+{
+ p_dev->conf.ConfigIndex = cfg->index;
+
+ if (!cfg->io.nwin)
+ return -ENODEV;
+
+ /* Get the IOaddr */
+ p_dev->io.BasePort1 = cfg->io.win[0].base;
+ p_dev->io.NumPorts1 = cfg->io.win[0].len;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(cfg->io.flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(cfg->io.flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
+
+ return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
static int cm4000_config(struct pcmcia_device * link, int devno)
{
struct cm4000_dev *dev;
- tuple_t tuple;
- cisparse_t parse;
- u_char buf[64];
- int fail_fn, fail_rc;
- int rc;
/* read the config-tuples */
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
-
- link->io.BasePort2 = 0;
- link->io.NumPorts2 = 0;
- link->io.Attributes2 = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- for (rc = pcmcia_get_first_tuple(link, &tuple);
- rc == CS_SUCCESS; rc = pcmcia_get_next_tuple(link, &tuple)) {
-
- rc = pcmcia_get_tuple_data(link, &tuple);
- if (rc != CS_SUCCESS)
- continue;
- rc = pcmcia_parse_tuple(link, &tuple, &parse);
- if (rc != CS_SUCCESS)
- continue;
-
- link->conf.ConfigIndex = parse.cftable_entry.index;
-
- if (!parse.cftable_entry.io.nwin)
- continue;
-
- /* Get the IOaddr */
- link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
- link->io.NumPorts1 = parse.cftable_entry.io.win[0].len;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(parse.cftable_entry.io.flags & CISTPL_IO_8BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(parse.cftable_entry.io.flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines = parse.cftable_entry.io.flags
- & CISTPL_IO_LINES_MASK;
-
- rc = pcmcia_request_io(link, &link->io);
- if (rc == CS_SUCCESS)
- break; /* we are done */
- }
- if (rc != CS_SUCCESS)
+ if (pcmcia_loop_config(link, cm4000_config_check, NULL))
goto cs_release;
link->conf.IntType = 00000002;
- if ((fail_rc =
- pcmcia_request_configuration(link, &link->conf)) != CS_SUCCESS) {
- fail_fn = RequestConfiguration;
+ if (pcmcia_request_configuration(link, &link->conf))
goto cs_release;
- }
dev = link->priv;
sprintf(dev->node.dev_name, DEVICE_NAME "%d", devno);
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
index 0b5934bef7a4..e0f5d8c9b266 100644
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -526,65 +526,49 @@ static void cm4040_reader_release(struct pcmcia_device *link)
return;
}
-static int reader_config(struct pcmcia_device *link, int devno)
+static int cm4040_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ void *priv_data)
{
- struct reader_dev *dev;
- tuple_t tuple;
- cisparse_t parse;
- u_char buf[64];
- int fail_fn, fail_rc;
int rc;
+ p_dev->conf.ConfigIndex = cfg->index;
+
+ if (!cfg->io.nwin)
+ return -ENODEV;
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
+ /* Get the IOaddr */
+ p_dev->io.BasePort1 = cfg->io.win[0].base;
+ p_dev->io.NumPorts1 = cfg->io.win[0].len;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(cfg->io.flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(cfg->io.flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
+
+ rc = pcmcia_request_io(p_dev, &p_dev->io);
+ dev_printk(KERN_INFO, &handle_to_dev(p_dev),
+ "pcmcia_request_io returned 0x%x\n", rc);
+ return rc;
+}
+
+
+static int reader_config(struct pcmcia_device *link, int devno)
+{
+ struct reader_dev *dev;
+ int fail_rc;
link->io.BasePort2 = 0;
link->io.NumPorts2 = 0;
link->io.Attributes2 = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- for (rc = pcmcia_get_first_tuple(link, &tuple);
- rc == CS_SUCCESS;
- rc = pcmcia_get_next_tuple(link, &tuple)) {
- rc = pcmcia_get_tuple_data(link, &tuple);
- if (rc != CS_SUCCESS)
- continue;
- rc = pcmcia_parse_tuple(link, &tuple, &parse);
- if (rc != CS_SUCCESS)
- continue;
-
- link->conf.ConfigIndex = parse.cftable_entry.index;
-
- if (!parse.cftable_entry.io.nwin)
- continue;
-
- link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
- link->io.NumPorts1 = parse.cftable_entry.io.win[0].len;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(parse.cftable_entry.io.flags & CISTPL_IO_8BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(parse.cftable_entry.io.flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines = parse.cftable_entry.io.flags
- & CISTPL_IO_LINES_MASK;
- rc = pcmcia_request_io(link, &link->io);
-
- dev_printk(KERN_INFO, &handle_to_dev(link), "foo");
- if (rc == CS_SUCCESS)
- break;
- else
- dev_printk(KERN_INFO, &handle_to_dev(link),
- "pcmcia_request_io failed 0x%x\n", rc);
- }
- if (rc != CS_SUCCESS)
+
+ if (pcmcia_loop_config(link, cm4040_config_check, NULL))
goto cs_release;
link->conf.IntType = 00000002;
if ((fail_rc = pcmcia_request_configuration(link,&link->conf))
!=CS_SUCCESS) {
- fail_fn = RequestConfiguration;
dev_printk(KERN_INFO, &handle_to_dev(link),
"pcmcia_request_configuration failed 0x%x\n",
fail_rc);
diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c
index 00e1d9620f7c..636231739f4b 100644
--- a/drivers/parport/parport_cs.c
+++ b/drivers/parport/parport_cs.c
@@ -149,52 +149,49 @@ static void parport_detach(struct pcmcia_device *link)
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+static int parport_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ void *priv_data)
+{
+ cistpl_cftable_entry_t *dflt = priv_data;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->conf.ConfigIndex = cfg->index;
+ if (epp_mode)
+ p_dev->conf.ConfigIndex |= FORCE_EPP_MODE;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ if (io->nwin == 2) {
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+ if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ goto next_entry;
+ return 0;
+ }
+
+next_entry:
+ if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
+ *dflt = *cfg;
+ return -ENODEV;
+}
+
static int parport_config(struct pcmcia_device *link)
{
parport_info_t *info = link->priv;
- tuple_t tuple;
- u_short buf[128];
- cisparse_t parse;
- cistpl_cftable_entry_t *cfg = &parse.cftable_entry;
cistpl_cftable_entry_t dflt = { 0 };
struct parport *p;
int last_ret, last_fn;
-
+
DEBUG(0, "parport_config(0x%p)\n", link);
-
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- tuple.Attributes = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0)
- goto next_entry;
-
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->conf.ConfigIndex = cfg->index;
- if (epp_mode)
- link->conf.ConfigIndex |= FORCE_EPP_MODE;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (io->nwin == 2) {
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
- /* If we've got this far, we're done */
- break;
- }
-
- next_entry:
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
+
+ last_ret = pcmcia_loop_config(link, parport_config_check, &dflt);
+ if (last_ret) {
+ cs_error(link, RequestIO, last_ret);
+ goto failed;
}
-
+
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 164d2a42eb59..ac60cd288418 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -439,43 +439,55 @@ first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
return pcmcia_parse_tuple(handle, tuple, parse);
}
-static int
-next_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
+/*====================================================================*/
+
+static int simple_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ void *priv_data)
{
- int i;
- i = pcmcia_get_next_tuple(handle, tuple);
- if (i != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS)
- return i;
- return pcmcia_parse_tuple(handle, tuple, parse);
+ static const int size_table[2] = { 8, 16 };
+ int *try = priv_data;
+
+ if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+ if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)])
+ && (cf->io.win[0].base != 0)) {
+ p_dev->conf.ConfigIndex = cf->index;
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.IOAddrLines = ((*try & 0x1) == 0) ?
+ 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -EINVAL;
}
-/*====================================================================*/
+static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ void *priv_data)
+{
+ static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+ int j;
+
+ if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
+ p_dev->conf.ConfigIndex = cf->index;
+ for (j = 0; j < 5; j++) {
+ p_dev->io.BasePort1 = base[j];
+ p_dev->io.IOAddrLines = base[j] ? 16 : 3;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ }
+ return -ENODEV;
+}
static int simple_config(struct pcmcia_device *link)
{
- static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
- static const int size_table[2] = { 8, 16 };
struct serial_info *info = link->priv;
- struct serial_cfg_mem *cfg_mem;
- tuple_t *tuple;
- u_char *buf;
- cisparse_t *parse;
- cistpl_cftable_entry_t *cf;
config_info_t config;
- int i, j, try;
- int s;
-
- cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
- if (!cfg_mem)
- return -1;
-
- tuple = &cfg_mem->tuple;
- parse = &cfg_mem->parse;
- cf = &parse->cftable_entry;
- buf = cfg_mem->buf;
+ int i, try;
/* If the card is already configured, look up the port and irq */
i = pcmcia_get_configuration_info(link, &config);
@@ -490,70 +502,28 @@ static int simple_config(struct pcmcia_device *link)
info->slave = 1;
}
if (info->slave) {
- kfree(cfg_mem);
return setup_serial(link, info, port, config.AssignedIRQ);
}
}
- /* First pass: look for a config entry that looks normal. */
- tuple->TupleData = (cisdata_t *) buf;
- tuple->TupleOffset = 0;
- tuple->TupleDataMax = 255;
- tuple->Attributes = 0;
- tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
- /* Two tries: without IO aliases, then with aliases */
- for (s = 0; s < 2; s++) {
- for (try = 0; try < 2; try++) {
- i = first_tuple(link, tuple, parse);
- while (i != CS_NO_MORE_ITEMS) {
- if (i != CS_SUCCESS)
- goto next_entry;
- if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) &&
- (cf->io.win[0].base != 0)) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.IOAddrLines = (try == 0) ?
- 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- goto found_port;
- }
-next_entry:
- i = next_tuple(link, tuple, parse);
- }
- }
- }
+ /* First pass: look for a config entry that looks normal.
+ * Two tries: without IO aliases, then with aliases */
+ for (try = 0; try < 4; try++)
+ if (!pcmcia_loop_config(link, simple_config_check, &try))
+ goto found_port;
+
/* Second pass: try to find an entry that isn't picky about
its base address, then try to grab any standard serial port
address, and finally try to get any free port. */
- i = first_tuple(link, tuple, parse);
- while (i != CS_NO_MORE_ITEMS) {
- if ((i == CS_SUCCESS) && (cf->io.nwin > 0) &&
- ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
- link->conf.ConfigIndex = cf->index;
- for (j = 0; j < 5; j++) {
- link->io.BasePort1 = base[j];
- link->io.IOAddrLines = base[j] ? 16 : 3;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- goto found_port;
- }
- }
- i = next_tuple(link, tuple, parse);
- }
+ if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
+ goto found_port;
- found_port:
- if (i != CS_SUCCESS) {
- printk(KERN_NOTICE
- "serial_cs: no usable port range found, giving up\n");
- cs_error(link, RequestIO, i);
- kfree(cfg_mem);
- return -1;
- }
+ printk(KERN_NOTICE
+ "serial_cs: no usable port range found, giving up\n");
+ cs_error(link, RequestIO, i);
+ return -1;
+found_port:
i = pcmcia_request_irq(link, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link, RequestIRQ, i);
@@ -571,86 +541,72 @@ next_entry:
i = pcmcia_request_configuration(link, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link, RequestConfiguration, i);
- kfree(cfg_mem);
return -1;
}
- kfree(cfg_mem);
return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
}
-static int multi_config(struct pcmcia_device * link)
+static int multi_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ void *priv_data)
{
- struct serial_info *info = link->priv;
- struct serial_cfg_mem *cfg_mem;
- tuple_t *tuple;
- u_char *buf;
- cisparse_t *parse;
- cistpl_cftable_entry_t *cf;
- int i, rc, base2 = 0;
+ int *base2 = priv_data;
+
+ /* The quad port cards have bad CIS's, so just look for a
+ window larger than 8 ports and assume it will be right */
+ if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
+ p_dev->conf.ConfigIndex = cf->index;
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev, &p_dev->io)) {
+ *base2 = p_dev->io.BasePort1 + 8;
+ return 0;
+ }
+ }
+ return -ENODEV;
+}
- cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
- if (!cfg_mem)
- return -1;
- tuple = &cfg_mem->tuple;
- parse = &cfg_mem->parse;
- cf = &parse->cftable_entry;
- buf = cfg_mem->buf;
+static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ void *priv_data)
+{
+ int *base2 = priv_data;
+
+ if (cf->io.nwin == 2) {
+ p_dev->conf.ConfigIndex = cf->index;
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.BasePort2 = cf->io.win[1].base;
+ p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev, &p_dev->io)) {
+ *base2 = p_dev->io.BasePort2;
+ return 0;
+ }
+ }
+ return -ENODEV;
+}
- tuple->TupleData = (cisdata_t *) buf;
- tuple->TupleOffset = 0;
- tuple->TupleDataMax = 255;
- tuple->Attributes = 0;
- tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
+static int multi_config(struct pcmcia_device *link)
+{
+ struct serial_info *info = link->priv;
+ int i, base2 = 0;
/* First, look for a generic full-sized window */
link->io.NumPorts1 = info->multi * 8;
- i = first_tuple(link, tuple, parse);
- while (i != CS_NO_MORE_ITEMS) {
- /* The quad port cards have bad CIS's, so just look for a
- window larger than 8 ports and assume it will be right */
- if ((i == CS_SUCCESS) && (cf->io.nwin == 1) &&
- (cf->io.win[0].len > 8)) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.IOAddrLines =
- cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- base2 = link->io.BasePort1 + 8;
- if (i == CS_SUCCESS)
- break;
- }
- i = next_tuple(link, tuple, parse);
- }
-
- /* If that didn't work, look for two windows */
- if (i != CS_SUCCESS) {
+ if (pcmcia_loop_config(link, multi_config_check, &base2)) {
+ /* If that didn't work, look for two windows */
link->io.NumPorts1 = link->io.NumPorts2 = 8;
info->multi = 2;
- i = first_tuple(link, tuple, parse);
- while (i != CS_NO_MORE_ITEMS) {
- if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.BasePort2 = cf->io.win[1].base;
- link->io.IOAddrLines =
- cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- base2 = link->io.BasePort2;
- if (i == CS_SUCCESS)
- break;
- }
- i = next_tuple(link, tuple, parse);
+ if (pcmcia_loop_config(link, multi_config_check_notpicky,
+ &base2)) {
+ printk(KERN_NOTICE "serial_cs: no usable port range"
+ "found, giving up\n");
+ return -ENODEV;
}
}
- if (i != CS_SUCCESS) {
- cs_error(link, RequestIO, i);
- rc = -1;
- goto free_cfg_mem;
- }
-
i = pcmcia_request_irq(link, &link->irq);
if (i != CS_SUCCESS) {
+ /* FIXME: comment does not fit, error handling does not fit */
printk(KERN_NOTICE
"serial_cs: no usable port range found, giving up\n");
cs_error(link, RequestIRQ, i);
@@ -666,8 +622,7 @@ static int multi_config(struct pcmcia_device * link)
i = pcmcia_request_configuration(link, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link, RequestConfiguration, i);
- rc = -1;
- goto free_cfg_mem;
+ return -ENODEV;
}
/* The Oxford Semiconductor OXCF950 cards are in fact single-port:
@@ -678,7 +633,8 @@ static int multi_config(struct pcmcia_device * link)
info->prodid == PRODID_POSSIO_GCC)) {
int err;
- if (cf->index == 1 || cf->index == 3) {
+ if (link->conf.ConfigIndex == 1 ||
+ link->conf.ConfigIndex == 3) {
err = setup_serial(link, info, base2,
link->irq.AssignedIRQ);
base2 = link->io.BasePort1;
@@ -695,18 +651,14 @@ static int multi_config(struct pcmcia_device * link)
if (info->quirk && info->quirk->wakeup)
info->quirk->wakeup(link);
- rc = 0;
- goto free_cfg_mem;
+ return 0;
}
setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
for (i = 0; i < info->multi - 1; i++)
setup_serial(link, info, base2 + (8 * i),
link->irq.AssignedIRQ);
- rc = 0;
-free_cfg_mem:
- kfree(cfg_mem);
- return rc;
+ return 0;
}
/*======================================================================
diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c
index ff9a29b76336..89c5e40ce3a0 100644
--- a/drivers/telephony/ixj_pcmcia.c
+++ b/drivers/telephony/ixj_pcmcia.c
@@ -124,65 +124,57 @@ static void ixj_get_serial(struct pcmcia_device * link, IXJ * j)
return;
}
+static int ixj_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ void *priv_data)
+{
+ cistpl_cftable_entry_t *dflt = priv_data;
+
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->conf.ConfigIndex = cfg->index;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ if (io->nwin == 2) {
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+ if (pcmcia_request_io(p_dev, &p_dev->io)) {
+ if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
+ *dflt = *cfg;
+ } else
+ return 0;
+ }
+ return -ENODEV;
+}
+
static int ixj_config(struct pcmcia_device * link)
{
IXJ *j;
ixj_info_t *info;
- tuple_t tuple;
- u_short buf[128];
- cisparse_t parse;
- cistpl_cftable_entry_t *cfg = &parse.cftable_entry;
- cistpl_cftable_entry_t dflt =
- {
- 0
- };
- int last_ret, last_fn;
+ cistpl_cftable_entry_t dflt = { 0 };
+
info = link->priv;
DEBUG(0, "ixj_config(0x%p)\n", link);
- tuple.TupleData = (cisdata_t *) buf;
- tuple.TupleOffset = 0;
- tuple.TupleDataMax = 255;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- tuple.Attributes = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0)
- goto next_entry;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->conf.ConfigIndex = cfg->index;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- if (io->nwin == 2) {
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
- /* If we've got this far, we're done */
- break;
- }
- next_entry:
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
- dflt = *cfg;
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
- }
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ if (pcmcia_loop_config(link, ixj_config_check, &dflt))
+ goto cs_failed;
+
+ if (pcmcia_request_configuration(link, &link->conf))
+ goto cs_failed;
/*
* Register the card with the core.
- */
- j=ixj_pcmcia_probe(link->io.BasePort1,link->io.BasePort1 + 0x10);
+ */
+ j = ixj_pcmcia_probe(link->io.BasePort1, link->io.BasePort1 + 0x10);
info->ndev = 1;
info->node.major = PHONE_MAJOR;
link->dev_node = &info->node;
ixj_get_serial(link, j);
return 0;
+
cs_failed:
- cs_error(link, last_fn, last_ret);
ixj_cs_release(link);
return -ENODEV;
}
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
index 5da63f535005..9773601bf0bb 100644
--- a/drivers/usb/host/sl811_cs.c
+++ b/drivers/usb/host/sl811_cs.c
@@ -155,88 +155,84 @@ static void sl811_cs_release(struct pcmcia_device * link)
platform_device_unregister(&platform_dev);
}
+struct sl811_css_cfg {
+ cistpl_cftable_entry_t dflt;
+ config_info_t conf;
+};
+
+static int sl811_cs_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ void *priv_data)
+{
+ struct sl811_css_cfg *cfg_mem = priv_data;
+
+ if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
+ memcpy(&cfg_mem->dflt, cfg, sizeof(cistpl_cftable_entry_t));
+
+ if (cfg->index == 0)
+ return -ENODEV;
+
+ p_dev->conf.ConfigIndex = cfg->index;
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
+ if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000 !=
+ cfg_mem->conf.Vcc)
+ return -ENODEV;
+ } else if (cfg_mem->dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) {
+ if (cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM]/10000
+ != cfg_mem->conf.Vcc)
+ return -ENODEV;
+ }
+
+ if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
+ else if (cfg_mem->dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
+
+ /* we need an interrupt */
+ if (cfg->irq.IRQInfo1 || cfg_mem->dflt.irq.IRQInfo1)
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+ /* IO window settings */
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io;
+
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+
+ return pcmcia_request_io(p_dev, &p_dev->io);
+ }
+ pcmcia_disable_device(p_dev);
+ return -ENODEV;
+}
+
+
static int sl811_cs_config(struct pcmcia_device *link)
{
struct device *parent = &handle_to_dev(link);
local_info_t *dev = link->priv;
- tuple_t tuple;
- cisparse_t parse;
int last_fn, last_ret;
- u_char buf[64];
- config_info_t conf;
- cistpl_cftable_entry_t dflt = { 0 };
+ struct sl811_css_cfg *cfg_mem;
DBG(0, "sl811_cs_config(0x%p)\n", link);
+ cfg_mem = kzalloc(sizeof(struct sl811_css_cfg), GFP_KERNEL);
+ if (!cfg_mem)
+ return -ENOMEM;
+
/* Look up the current Vcc */
CS_CHECK(GetConfigurationInfo,
- pcmcia_get_configuration_info(link, &conf));
-
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-
- if (pcmcia_get_tuple_data(link, &tuple) != 0
- || pcmcia_parse_tuple(link, &tuple, &parse)
- != 0)
- goto next_entry;
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT) {
- dflt = *cfg;
- }
+ pcmcia_get_configuration_info(link, &cfg_mem->conf));
- if (cfg->index == 0)
- goto next_entry;
-
- link->conf.ConfigIndex = cfg->index;
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
- if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000
- != conf.Vcc)
- goto next_entry;
- } else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) {
- if (dflt.vcc.param[CISTPL_POWER_VNOM]/10000
- != conf.Vcc)
- goto next_entry;
- }
-
- if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
- else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp =
- dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
-
- /* we need an interrupt */
- if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
- link->conf.Attributes |= CONF_ENABLE_IRQ;
-
- /* IO window settings */
- link->io.NumPorts1 = link->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
-
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
-
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
- }
- break;
-
-next_entry:
- pcmcia_disable_device(link);
- last_ret = pcmcia_get_next_tuple(link, &tuple);
- }
+ if (pcmcia_loop_config(link, sl811_cs_config_check, cfg_mem))
+ return -ENODEV;
/* require an IRQ and two registers */
if (!link->io.NumPorts1 || link->io.NumPorts1 < 2)
@@ -269,8 +265,10 @@ cs_failed:
printk("sl811_cs_config failed\n");
cs_error(link, last_fn, last_ret);
sl811_cs_release(link);
+ kfree(cfg_mem);
return -ENODEV;
}
+ kfree(cfg_mem);
return 0;
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 09:46:39 +0000