diff options
27 files changed, 389 insertions, 252 deletions
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index 70d68ce8640a..a87dc277a5ca 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -1,5 +1,5 @@ Generic Thermal Sysfs driver How To -========================= +=================================== Written by Sujith Thomas <sujith.thomas@intel.com>, Zhang Rui <rui.zhang@intel.com> @@ -10,20 +10,20 @@ Copyright (c) 2008 Intel Corporation 0. Introduction -The generic thermal sysfs provides a set of interfaces for thermal zone devices (sensors) -and thermal cooling devices (fan, processor...) to register with the thermal management -solution and to be a part of it. +The generic thermal sysfs provides a set of interfaces for thermal zone +devices (sensors) and thermal cooling devices (fan, processor...) to register +with the thermal management solution and to be a part of it. -This how-to focuses on enabling new thermal zone and cooling devices to participate -in thermal management. -This solution is platform independent and any type of thermal zone devices and -cooling devices should be able to make use of the infrastructure. +This how-to focuses on enabling new thermal zone and cooling devices to +participate in thermal management. +This solution is platform independent and any type of thermal zone devices +and cooling devices should be able to make use of the infrastructure. -The main task of the thermal sysfs driver is to expose thermal zone attributes as well -as cooling device attributes to the user space. -An intelligent thermal management application can make decisions based on inputs -from thermal zone attributes (the current temperature and trip point temperature) -and throttle appropriate devices. +The main task of the thermal sysfs driver is to expose thermal zone attributes +as well as cooling device attributes to the user space. +An intelligent thermal management application can make decisions based on +inputs from thermal zone attributes (the current temperature and trip point +temperature) and throttle appropriate devices. [0-*] denotes any positive number starting from 0 [1-*] denotes any positive number starting from 1 @@ -31,77 +31,77 @@ and throttle appropriate devices. 1. thermal sysfs driver interface functions 1.1 thermal zone device interface -1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, int trips, - void *devdata, struct thermal_zone_device_ops *ops) - - This interface function adds a new thermal zone device (sensor) to - /sys/class/thermal folder as thermal_zone[0-*]. - It tries to bind all the thermal cooling devices registered at the same time. - - name: the thermal zone name. - trips: the total number of trip points this thermal zone supports. - devdata: device private data - ops: thermal zone device call-backs. - .bind: bind the thermal zone device with a thermal cooling device. - .unbind: unbind the thermal zone device with a thermal cooling device. - .get_temp: get the current temperature of the thermal zone. - .get_mode: get the current mode (user/kernel) of the thermal zone. - "kernel" means thermal management is done in kernel. - "user" will prevent kernel thermal driver actions upon trip points - so that user applications can take charge of thermal management. - .set_mode: set the mode (user/kernel) of the thermal zone. - .get_trip_type: get the type of certain trip point. - .get_trip_temp: get the temperature above which the certain trip point - will be fired. +1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, + int trips, void *devdata, struct thermal_zone_device_ops *ops) + + This interface function adds a new thermal zone device (sensor) to + /sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the + thermal cooling devices registered at the same time. + + name: the thermal zone name. + trips: the total number of trip points this thermal zone supports. + devdata: device private data + ops: thermal zone device call-backs. + .bind: bind the thermal zone device with a thermal cooling device. + .unbind: unbind the thermal zone device with a thermal cooling device. + .get_temp: get the current temperature of the thermal zone. + .get_mode: get the current mode (user/kernel) of the thermal zone. + - "kernel" means thermal management is done in kernel. + - "user" will prevent kernel thermal driver actions upon trip points + so that user applications can take charge of thermal management. + .set_mode: set the mode (user/kernel) of the thermal zone. + .get_trip_type: get the type of certain trip point. + .get_trip_temp: get the temperature above which the certain trip point + will be fired. 1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz) - This interface function removes the thermal zone device. - It deletes the corresponding entry form /sys/class/thermal folder and unbind all - the thermal cooling devices it uses. + This interface function removes the thermal zone device. + It deletes the corresponding entry form /sys/class/thermal folder and + unbind all the thermal cooling devices it uses. 1.2 thermal cooling device interface 1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name, - void *devdata, struct thermal_cooling_device_ops *) - - This interface function adds a new thermal cooling device (fan/processor/...) to - /sys/class/thermal/ folder as cooling_device[0-*]. - It tries to bind itself to all the thermal zone devices register at the same time. - name: the cooling device name. - devdata: device private data. - ops: thermal cooling devices call-backs. - .get_max_state: get the Maximum throttle state of the cooling device. - .get_cur_state: get the Current throttle state of the cooling device. - .set_cur_state: set the Current throttle state of the cooling device. + void *devdata, struct thermal_cooling_device_ops *) + + This interface function adds a new thermal cooling device (fan/processor/...) + to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself + to all the thermal zone devices register at the same time. + name: the cooling device name. + devdata: device private data. + ops: thermal cooling devices call-backs. + .get_max_state: get the Maximum throttle state of the cooling device. + .get_cur_state: get the Current throttle state of the cooling device. + .set_cur_state: set the Current throttle state of the cooling device. 1.2.2 void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev) - This interface function remove the thermal cooling device. - It deletes the corresponding entry form /sys/class/thermal folder and unbind - itself from all the thermal zone devices using it. + This interface function remove the thermal cooling device. + It deletes the corresponding entry form /sys/class/thermal folder and + unbind itself from all the thermal zone devices using it. 1.3 interface for binding a thermal zone device with a thermal cooling device 1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, - int trip, struct thermal_cooling_device *cdev); + int trip, struct thermal_cooling_device *cdev); - This interface function bind a thermal cooling device to the certain trip point - of a thermal zone device. - This function is usually called in the thermal zone device .bind callback. - tz: the thermal zone device - cdev: thermal cooling device - trip: indicates which trip point the cooling devices is associated with - in this thermal zone. + This interface function bind a thermal cooling device to the certain trip + point of a thermal zone device. + This function is usually called in the thermal zone device .bind callback. + tz: the thermal zone device + cdev: thermal cooling device + trip: indicates which trip point the cooling devices is associated with + in this thermal zone. 1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, - int trip, struct thermal_cooling_device *cdev); + int trip, struct thermal_cooling_device *cdev); - This interface function unbind a thermal cooling device from the certain trip point - of a thermal zone device. - This function is usually called in the thermal zone device .unbind callback. - tz: the thermal zone device - cdev: thermal cooling device - trip: indicates which trip point the cooling devices is associated with - in this thermal zone. + This interface function unbind a thermal cooling device from the certain + trip point of a thermal zone device. This function is usually called in + the thermal zone device .unbind callback. + tz: the thermal zone device + cdev: thermal cooling device + trip: indicates which trip point the cooling devices is associated with + in this thermal zone. 2. sysfs attributes structure @@ -114,153 +114,166 @@ if hwmon is compiled in or built as a module. Thermal zone device sys I/F, created once it's registered: /sys/class/thermal/thermal_zone[0-*]: - |-----type: Type of the thermal zone - |-----temp: Current temperature - |-----mode: Working mode of the thermal zone - |-----trip_point_[0-*]_temp: Trip point temperature - |-----trip_point_[0-*]_type: Trip point type + |---type: Type of the thermal zone + |---temp: Current temperature + |---mode: Working mode of the thermal zone + |---trip_point_[0-*]_temp: Trip point temperature + |---trip_point_[0-*]_type: Trip point type Thermal cooling device sys I/F, created once it's registered: /sys/class/thermal/cooling_device[0-*]: - |-----type : Type of the cooling device(processor/fan/...) - |-----max_state: Maximum cooling state of the cooling device - |-----cur_state: Current cooling state of the cooling device + |---type: Type of the cooling device(processor/fan/...) + |---max_state: Maximum cooling state of the cooling device + |---cur_state: Current cooling state of the cooling device -These two dynamic attributes are created/removed in pairs. -They represent the relationship between a thermal zone and its associated cooling device. -They are created/removed for each -thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device successful execution. +Then next two dynamic attributes are created/removed in pairs. They represent +the relationship between a thermal zone and its associated cooling device. +They are created/removed for each successful execution of +thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device. -/sys/class/thermal/thermal_zone[0-*] - |-----cdev[0-*]: The [0-*]th cooling device in the current thermal zone - |-----cdev[0-*]_trip_point: Trip point that cdev[0-*] is associated with +/sys/class/thermal/thermal_zone[0-*]: + |---cdev[0-*]: [0-*]th cooling device in current thermal zone + |---cdev[0-*]_trip_point: Trip point that cdev[0-*] is associated with Besides the thermal zone device sysfs I/F and cooling device sysfs I/F, -the generic thermal driver also creates a hwmon sysfs I/F for each _type_ of -thermal zone device. E.g. the generic thermal driver registers one hwmon class device -and build the associated hwmon sysfs I/F for all the registered ACPI thermal zones. +the generic thermal driver also creates a hwmon sysfs I/F for each _type_ +of thermal zone device. E.g. the generic thermal driver registers one hwmon +class device and build the associated hwmon sysfs I/F for all the registered +ACPI thermal zones. + /sys/class/hwmon/hwmon[0-*]: - |-----name: The type of the thermal zone devices. - |-----temp[1-*]_input: The current temperature of thermal zone [1-*]. - |-----temp[1-*]_critical: The critical trip point of thermal zone [1-*]. + |---name: The type of the thermal zone devices + |---temp[1-*]_input: The current temperature of thermal zone [1-*] + |---temp[1-*]_critical: The critical trip point of thermal zone [1-*] + Please read Documentation/hwmon/sysfs-interface for additional information. *************************** * Thermal zone attributes * *************************** -type Strings which represent the thermal zone type. - This is given by thermal zone driver as part of registration. - Eg: "acpitz" indicates it's an ACPI thermal device. - In order to keep it consistent with hwmon sys attribute, - this should be a short, lowercase string, - not containing spaces nor dashes. - RO - Required - -temp Current temperature as reported by thermal zone (sensor) - Unit: millidegree Celsius - RO - Required - -mode One of the predefined values in [kernel, user] - This file gives information about the algorithm - that is currently managing the thermal zone. - It can be either default kernel based algorithm - or user space application. - RW - Optional - kernel = Thermal management in kernel thermal zone driver. - user = Preventing kernel thermal zone driver actions upon - trip points so that user application can take full - charge of the thermal management. - -trip_point_[0-*]_temp The temperature above which trip point will be fired - Unit: millidegree Celsius - RO - Optional - -trip_point_[0-*]_type Strings which indicate the type of the trip point - E.g. it can be one of critical, hot, passive, - active[0-*] for ACPI thermal zone. - RO - Optional - -cdev[0-*] Sysfs link to the thermal cooling device node where the sys I/F - for cooling device throttling control represents. - RO - Optional - -cdev[0-*]_trip_point The trip point with which cdev[0-*] is associated in this thermal zone - -1 means the cooling device is not associated with any trip point. - RO - Optional - -****************************** -* Cooling device attributes * -****************************** - -type String which represents the type of device - eg: For generic ACPI: this should be "Fan", - "Processor" or "LCD" - eg. For memory controller device on intel_menlow platform: - this should be "Memory controller" - RO - Required - -max_state The maximum permissible cooling state of this cooling device. - RO - Required - -cur_state The current cooling state of this cooling device. - the value can any integer numbers between 0 and max_state, - cur_state == 0 means no cooling - cur_state == max_state means the maximum cooling. - RW - Required +type + Strings which represent the thermal zone type. + This is given by thermal zone driver as part of registration. + E.g: "acpitz" indicates it's an ACPI thermal device. + In order to keep it consistent with hwmon sys attribute; this should + be a short, lowercase string, not containing spaces nor dashes. + RO, Required + +temp + Current temperature as reported by thermal zone (sensor). + Unit: millidegree Celsius + RO, Required + +mode + One of the predefined values in [kernel, user]. + This file gives information about the algorithm that is currently + managing the thermal zone. It can be either default kernel based + algorithm or user space application. + kernel = Thermal management in kernel thermal zone driver. + user = Preventing kernel thermal zone driver actions upon + trip points so that user application can take full + charge of the thermal management. + RW, Optional + +trip_point_[0-*]_temp + The temperature above which trip point will be fired. + Unit: millidegree Celsius + RO, Optional + +trip_point_[0-*]_type + Strings which indicate the type of the trip point. + E.g. it can be one of critical, hot, passive, active[0-*] for ACPI + thermal zone. + RO, Optional + +cdev[0-*] + Sysfs link to the thermal cooling device node where the sys I/F + for cooling device throttling control represents. + RO, Optional + +cdev[0-*]_trip_point + The trip point with which cdev[0-*] is associated in this thermal + zone; -1 means the cooling device is not associated with any trip + point. + RO, Optional + +passive + Attribute is only present for zones in which the passive cooling + policy is not supported by native thermal driver. Default is zero + and can be set to a temperature (in millidegrees) to enable a + passive trip point for the zone. Activation is done by polling with + an interval of 1 second. + Unit: millidegrees Celsius + RW, Optional + +***************************** +* Cooling device attributes * +***************************** + +type + String which represents the type of device, e.g: + - for generic ACPI: should be "Fan", "Processor" or "LCD" + - for memory controller device on intel_menlow platform: + should be "Memory controller". + RO, Required + +max_state + The maximum permissible cooling state of this cooling device. + RO, Required + +cur_state + The current cooling state of this cooling device. + The value can any integer numbers between 0 and max_state: + - cur_state == 0 means no cooling + - cur_state == max_state means the maximum cooling. + RW, Required 3. A simple implementation -ACPI thermal zone may support multiple trip points like critical/hot/passive/active. -If an ACPI thermal zone supports critical, passive, active[0] and active[1] at the same time, -it may register itself as a thermal_zone_device (thermal_zone1) with 4 trip points in all. -It has one processor and one fan, which are both registered as thermal_cooling_device. -If the processor is listed in _PSL method, and the fan is listed in _AL0 method, -the sys I/F structure will be built like this: +ACPI thermal zone may support multiple trip points like critical, hot, +passive, active. If an ACPI thermal zone supports critical, passive, +active[0] and active[1] at the same time, it may register itself as a +thermal_zone_device (thermal_zone1) with 4 trip points in all. +It has one processor and one fan, which are both registered as +thermal_cooling_device. + +If the processor is listed in _PSL method, and the fan is listed in _AL0 +method, the sys I/F structure will be built like this: /sys/class/thermal: |thermal_zone1: - |-----type: acpitz - |-----temp: 37000 - |-----mode: kernel - |-----trip_point_0_temp: 100000 - |-----trip_point_0_type: critical - |-----trip_point_1_temp: 80000 - |-----trip_point_1_type: passive - |-----trip_point_2_temp: 70000 - |-----trip_point_2_type: active0 - |-----trip_point_3_temp: 60000 - |-----trip_point_3_type: active1 - |-----cdev0: --->/sys/class/thermal/cooling_device0 - |-----cdev0_trip_point: 1 /* cdev0 can be used for passive */ - |-----cdev1: --->/sys/class/thermal/cooling_device3 - |-----cdev1_trip_point: 2 /* cdev1 can be used for active[0]*/ + |---type: acpitz + |---temp: 37000 + |---mode: kernel + |---trip_point_0_temp: 100000 + |---trip_point_0_type: critical + |---trip_point_1_temp: 80000 + |---trip_point_1_type: passive + |---trip_point_2_temp: 70000 + |---trip_point_2_type: active0 + |---trip_point_3_temp: 60000 + |---trip_point_3_type: active1 + |---cdev0: --->/sys/class/thermal/cooling_device0 + |---cdev0_trip_point: 1 /* cdev0 can be used for passive */ + |---cdev1: --->/sys/class/thermal/cooling_device3 + |---cdev1_trip_point: 2 /* cdev1 can be used for active[0]*/ |cooling_device0: - |-----type: Processor - |-----max_state: 8 - |-----cur_state: 0 + |---type: Processor + |---max_state: 8 + |---cur_state: 0 |cooling_device3: - |-----type: Fan - |-----max_state: 2 - |-----cur_state: 0 + |---type: Fan + |---max_state: 2 + |---cur_state: 0 /sys/class/hwmon: |hwmon0: - |-----name: acpitz - |-----temp1_input: 37000 - |-----temp1_crit: 100000 + |---name: acpitz + |---temp1_input: 37000 + |---temp1_crit: 100000 diff --git a/arch/m32r/boot/compressed/Makefile b/arch/m32r/boot/compressed/Makefile index 1003880d0dfd..177716b1d613 100644 --- a/arch/m32r/boot/compressed/Makefile +++ b/arch/m32r/boot/compressed/Makefile @@ -1,5 +1,5 @@ # -# linux/arch/sh/boot/compressed/Makefile +# linux/arch/m32r/boot/compressed/Makefile # # create a compressed vmlinux image from the original vmlinux # @@ -47,5 +47,5 @@ suffix_$(CONFIG_KERNEL_GZIP) = gz suffix_$(CONFIG_KERNEL_BZIP2) = bz2 suffix_$(CONFIG_KERNEL_LZMA) = lzma -$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE +$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y) FORCE $(call if_changed,ld) diff --git a/arch/sh/include/asm/rwsem.h b/arch/sh/include/asm/rwsem.h index 1987f3ea7f1b..06e2251a5e48 100644 --- a/arch/sh/include/asm/rwsem.h +++ b/arch/sh/include/asm/rwsem.h @@ -41,7 +41,7 @@ struct rw_semaphore { #endif #define __RWSEM_INITIALIZER(name) \ - { RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \ + { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \ LIST_HEAD_INIT((name).wait_list) \ __RWSEM_DEP_MAP_INIT(name) } diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c index 2d07084e4882..d76a23170dbb 100644 --- a/arch/sh/kernel/dwarf.c +++ b/arch/sh/kernel/dwarf.c @@ -555,7 +555,7 @@ struct dwarf_frame * dwarf_unwind_stack(unsigned long pc, * NOTE: the return address is guaranteed to be setup by the * time this function makes its first function call. */ - if (!pc && !prev) + if (!pc || !prev) pc = (unsigned long)current_text_addr(); #ifdef CONFIG_FUNCTION_GRAPH_TRACER diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index 519e2d16cd06..b7f235c74d66 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -72,6 +72,7 @@ static void __uses_jump_to_uncached sh4_flush_icache_range(void *args) for (v = start; v < end; v += L1_CACHE_BYTES) { unsigned long icacheaddr; + int j, n; __ocbwb(v); @@ -79,8 +80,10 @@ static void __uses_jump_to_uncached sh4_flush_icache_range(void *args) cpu_data->icache.entry_mask); /* Clear i-cache line valid-bit */ + n = boot_cpu_data.icache.n_aliases; for (i = 0; i < cpu_data->icache.ways; i++) { - __raw_writel(0, icacheaddr); + for (j = 0; j < n; j++) + __raw_writel(0, icacheaddr + (j * PAGE_SIZE)); icacheaddr += cpu_data->icache.way_incr; } } diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h index 8e679ef5b231..a4471e3d3853 100644 --- a/drivers/acpi/acpica/acconfig.h +++ b/drivers/acpi/acpica/acconfig.h @@ -103,9 +103,9 @@ #define ACPI_MAX_REFERENCE_COUNT 0x1000 -/* Size of cached memory mapping for system memory operation region */ +/* Default page size for use in mapping memory for operation regions */ -#define ACPI_SYSMEM_REGION_WINDOW_SIZE 4096 +#define ACPI_DEFAULT_PAGE_SIZE 4096 /* Must be power of 2 */ /* owner_id tracking. 8 entries allows for 255 owner_ids */ diff --git a/drivers/acpi/acpica/exregion.c b/drivers/acpi/acpica/exregion.c index 3a54b737d2da..2bd83ac57c3a 100644 --- a/drivers/acpi/acpica/exregion.c +++ b/drivers/acpi/acpica/exregion.c @@ -77,7 +77,8 @@ acpi_ex_system_memory_space_handler(u32 function, void *logical_addr_ptr = NULL; struct acpi_mem_space_context *mem_info = region_context; u32 length; - acpi_size window_size; + acpi_size map_length; + acpi_size page_boundary_map_length; #ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED u32 remainder; #endif @@ -144,25 +145,39 @@ acpi_ex_system_memory_space_handler(u32 function, } /* - * Don't attempt to map memory beyond the end of the region, and - * constrain the maximum mapping size to something reasonable. + * Attempt to map from the requested address to the end of the region. + * However, we will never map more than one page, nor will we cross + * a page boundary. */ - window_size = (acpi_size) + map_length = (acpi_size) ((mem_info->address + mem_info->length) - address); - if (window_size > ACPI_SYSMEM_REGION_WINDOW_SIZE) { - window_size = ACPI_SYSMEM_REGION_WINDOW_SIZE; + /* + * If mapping the entire remaining portion of the region will cross + * a page boundary, just map up to the page boundary, do not cross. + * On some systems, crossing a page boundary while mapping regions + * can cause warnings if the pages have different attributes + * due to resource management + */ + page_boundary_map_length = + ACPI_ROUND_UP(address, ACPI_DEFAULT_PAGE_SIZE) - address; + + if (!page_boundary_map_length) { + page_boundary_map_length = ACPI_DEFAULT_PAGE_SIZE; + } + + if (map_length > page_boundary_map_length) { + map_length = page_boundary_map_length; } /* Create a new mapping starting at the address given */ - mem_info->mapped_logical_address = - acpi_os_map_memory((acpi_physical_address) address, window_size); + mem_info->mapped_logical_address = acpi_os_map_memory((acpi_physical_address) address, map_length); if (!mem_info->mapped_logical_address) { ACPI_ERROR((AE_INFO, "Could not map memory at %8.8X%8.8X, size %X", ACPI_FORMAT_NATIVE_UINT(address), - (u32) window_size)); + (u32) map_length)); mem_info->mapped_length = 0; return_ACPI_STATUS(AE_NO_MEMORY); } @@ -170,7 +185,7 @@ acpi_ex_system_memory_space_handler(u32 function, /* Save the physical address and mapping size */ mem_info->mapped_physical_address = address; - mem_info->mapped_length = window_size; + mem_info->mapped_length = map_length; } /* diff --git a/drivers/acpi/power_meter.c b/drivers/acpi/power_meter.c index e6bfd77986b8..2ef7030a0c28 100644 --- a/drivers/acpi/power_meter.c +++ b/drivers/acpi/power_meter.c @@ -294,7 +294,11 @@ static int set_acpi_trip(struct acpi_power_meter_resource *resource) return -EINVAL; } - return data; + /* _PTP returns 0 on success, nonzero otherwise */ + if (data) + return -EINVAL; + + return 0; } static ssize_t set_trip(struct device *dev, struct device_attribute *devattr, diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c index f8b6f555ba52..d0d25e2e1ced 100644 --- a/drivers/acpi/proc.c +++ b/drivers/acpi/proc.c @@ -393,7 +393,7 @@ acpi_system_write_wakeup_device(struct file *file, struct list_head *node, *next; char strbuf[5]; char str[5] = ""; - int len = count; + unsigned int len = count; struct acpi_device *found_dev = NULL; if (len > 4) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index c567b46dfa0f..ec742a4e5635 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -770,7 +770,7 @@ static struct notifier_block acpi_cpu_notifier = .notifier_call = acpi_cpu_soft_notify, }; -static int acpi_processor_add(struct acpi_device *device) +static int __cpuinit acpi_processor_add(struct acpi_device *device) { struct acpi_processor *pr = NULL; int result = 0; diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 4c6c14c1e307..1c5d7a8b2fdf 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -1133,15 +1133,15 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr) int result = 0; struct acpi_processor_throttling *pthrottling; + if (!pr) + return -EINVAL; + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n", pr->throttling.address, pr->throttling.duty_offset, pr->throttling.duty_width)); - if (!pr) - return -EINVAL; - /* * Evaluate _PTC, _TSS and _TPC * They must all be present or none of them can be used. diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index a90afcc723ab..4cc1b8116e76 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -413,6 +413,30 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { }, }, { + .callback = init_set_sci_en_on_resume, + .ident = "Hewlett-Packard Pavilion dv4", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Hewlett-Packard Pavilion dv7", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv7"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Hewlett-Packard Compaq Presario CQ40 Notebook PC", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "Compaq Presario CQ40 Notebook PC"), + }, + }, + { .callback = init_old_suspend_ordering, .ident = "Panasonic CF51-2L", .matches = { diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 64e3c581b7a9..05dff631591c 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1223,7 +1223,7 @@ acpi_video_device_write_state(struct file *file, u32 state = 0; - if (!dev || count + 1 > sizeof str) + if (!dev || count >= sizeof(str)) return -EINVAL; if (copy_from_user(str, buffer, count)) @@ -1280,7 +1280,7 @@ acpi_video_device_write_brightness(struct file *file, int i; - if (!dev || !dev->brightness || count + 1 > sizeof str) + if (!dev || !dev->brightness || count >= sizeof(str)) return -EINVAL; if (copy_from_user(str, buffer, count)) @@ -1562,7 +1562,7 @@ acpi_video_bus_write_POST(struct file *file, unsigned long long opt, options; - if (!video || count + 1 > sizeof str) + if (!video || count >= sizeof(str)) return -EINVAL; status = acpi_video_bus_POST_options(video, &options); @@ -1602,7 +1602,7 @@ acpi_video_bus_write_DOS(struct file *file, unsigned long opt; - if (!video || count + 1 > sizeof str) + if (!video || count >= sizeof(str)) return -EINVAL; if (copy_from_user(str, buffer, count)) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index d379e74a05d0..4226e5352738 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -150,8 +150,6 @@ struct eeepc_hotk { /* The actual device the driver binds to */ static struct eeepc_hotk *ehotk; -static void eeepc_rfkill_hotplug(bool real); - /* Platform device/driver */ static int eeepc_hotk_thaw(struct device *device); static int eeepc_hotk_restore(struct device *device); @@ -345,16 +343,7 @@ static bool eeepc_wlan_rfkill_blocked(void) static int eeepc_rfkill_set(void *data, bool blocked) { unsigned long asl = (unsigned long)data; - int ret; - - if (asl != CM_ASL_WLAN) - return set_acpi(asl, !blocked); - - /* hack to avoid panic with rt2860sta */ - if (blocked) - eeepc_rfkill_hotplug(false); - ret = set_acpi(asl, !blocked); - return ret; + return set_acpi(asl, !blocked); } static const struct rfkill_ops eeepc_rfkill_ops = { @@ -367,7 +356,8 @@ static void __devinit eeepc_enable_camera(void) * If the following call to set_acpi() fails, it's because there's no * camera so we can ignore the error. */ - set_acpi(CM_ASL_CAMERA, 1); + if (get_acpi(CM_ASL_CAMERA) == 0) + set_acpi(CM_ASL_CAMERA, 1); } /* @@ -654,13 +644,13 @@ static int eeepc_get_adapter_status(struct hotplug_slot *hotplug_slot, return 0; } -static void eeepc_rfkill_hotplug(bool real) +static void eeepc_rfkill_hotplug(void) { struct pci_dev *dev; struct pci_bus *bus; - bool blocked = real ? eeepc_wlan_rfkill_blocked() : true; + bool blocked = eeepc_wlan_rfkill_blocked(); - if (real && ehotk->wlan_rfkill) + if (ehotk->wlan_rfkill) rfkill_set_sw_state(ehotk->wlan_rfkill, blocked); mutex_lock(&ehotk->hotplug_lock); @@ -703,7 +693,7 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) if (event != ACPI_NOTIFY_BUS_CHECK) return; - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); } static void eeepc_hotk_notify(struct acpi_device *device, u32 event) @@ -861,7 +851,7 @@ static int eeepc_hotk_restore(struct device *device) { /* Refresh both wlan rfkill state and pci hotplug */ if (ehotk->wlan_rfkill) - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); if (ehotk->bluetooth_rfkill) rfkill_set_sw_state(ehotk->bluetooth_rfkill, @@ -1004,7 +994,7 @@ static void eeepc_rfkill_exit(void) * Refresh pci hotplug in case the rfkill state was changed after * eeepc_unregister_rfkill_notifier() */ - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); if (ehotk->hotplug_slot) pci_hp_deregister(ehotk->hotplug_slot); @@ -1120,7 +1110,7 @@ static int eeepc_rfkill_init(struct device *dev) * Refresh pci hotplug in case the rfkill state was changed during * setup. */ - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); exit: if (result && result != -ENODEV) diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 85119fb7cb50..6498bd1fb6dd 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1143,7 +1143,7 @@ static void serial_console_write(struct console *co, const char *s, while ((sci_in(port, SCxSR) & bits) != bits) cpu_relax(); - if (sci_port->disable); + if (sci_port->disable) sci_port->disable(port); } diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 4e83c297ec9e..6f8d8f971212 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -180,15 +180,15 @@ trip_point_type_show(struct device *dev, struct device_attribute *attr, switch (type) { case THERMAL_TRIP_CRITICAL: - return sprintf(buf, "critical"); + return sprintf(buf, "critical\n"); case THERMAL_TRIP_HOT: - return sprintf(buf, "hot"); + return sprintf(buf, "hot\n"); case THERMAL_TRIP_PASSIVE: - return sprintf(buf, "passive"); + return sprintf(buf, "passive\n"); case THERMAL_TRIP_ACTIVE: - return sprintf(buf, "active"); + return sprintf(buf, "active\n"); default: - return sprintf(buf, "unknown"); + return sprintf(buf, "unknown\n"); } } diff --git a/sound/oss/dmasound/dmasound_core.c b/sound/oss/dmasound/dmasound_core.c index 793b7f478433..3f3c3f71db4b 100644 --- a/sound/oss/dmasound/dmasound_core.c +++ b/sound/oss/dmasound/dmasound_core.c @@ -219,7 +219,9 @@ static int shared_resources_initialised; * Mid level stuff */ -struct sound_settings dmasound = { .lock = SPIN_LOCK_UNLOCKED }; +struct sound_settings dmasound = { + .lock = __SPIN_LOCK_UNLOCKED(dmasound.lock) +}; static inline void sound_silence(void) { diff --git a/sound/oss/sb_common.c b/sound/oss/sb_common.c index 77d0e5efda76..ce4db49291f7 100644 --- a/sound/oss/sb_common.c +++ b/sound/oss/sb_common.c @@ -157,7 +157,7 @@ static void sb_intr (sb_devc *devc) break; default: - /* printk(KERN_WARN "Sound Blaster: Unexpected interrupt\n"); */ + /* printk(KERN_WARNING "Sound Blaster: Unexpected interrupt\n"); */ ; } } @@ -177,7 +177,7 @@ static void sb_intr (sb_devc *devc) break; default: - /* printk(KERN_WARN "Sound Blaster: Unexpected interrupt\n"); */ + /* printk(KERN_WARNING "Sound Blaster: Unexpected interrupt\n"); */ ; } } diff --git a/sound/oss/sb_ess.c b/sound/oss/sb_ess.c index 180e95c87e3e..51a3d381a59e 100644 --- a/sound/oss/sb_ess.c +++ b/sound/oss/sb_ess.c @@ -782,7 +782,7 @@ printk(KERN_INFO "FKS: ess_handle_channel %s irq_mode=%d\n", channel, irq_mode); break; default:; - /* printk(KERN_WARN "ESS: Unexpected interrupt\n"); */ + /* printk(KERN_WARNING "ESS: Unexpected interrupt\n"); */ } } diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index e340792f6cb3..6517f589d01d 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -722,9 +722,10 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus, chip->last_cmd[addr]); chip->single_cmd = 1; bus->response_reset = 0; - /* re-initialize CORB/RIRB */ + /* release CORB/RIRB */ azx_free_cmd_io(chip); - azx_init_cmd_io(chip); + /* disable unsolicited responses */ + azx_writel(chip, GCTL, azx_readl(chip, GCTL) & ~ICH6_GCTL_UNSOL); return -1; } @@ -865,7 +866,9 @@ static int azx_reset(struct azx *chip) } /* Accept unsolicited responses */ - azx_writel(chip, GCTL, azx_readl(chip, GCTL) | ICH6_GCTL_UNSOL); + if (!chip->single_cmd) + azx_writel(chip, GCTL, azx_readl(chip, GCTL) | + ICH6_GCTL_UNSOL); /* detect codecs */ if (!chip->codec_mask) { @@ -980,7 +983,8 @@ static void azx_init_chip(struct azx *chip) azx_int_enable(chip); /* initialize the codec command I/O */ - azx_init_cmd_io(chip); + if (!chip->single_cmd) + azx_init_cmd_io(chip); /* program the position buffer */ azx_writel(chip, DPLBASE, (u32)chip->posbuf.addr); diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 3fbbc8c01e70..6479e65858d3 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -2325,6 +2325,7 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = { CXT5066_LAPTOP), SND_PCI_QUIRK(0x1028, 0x02f5, "Dell", CXT5066_DELL_LAPTOP), + SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5), {} }; diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 66c0876bf734..8eb6508cd991 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -28,6 +28,7 @@ #include <linux/delay.h> #include <linux/slab.h> #include <linux/pci.h> +#include <linux/dmi.h> #include <sound/core.h> #include <sound/asoundef.h> #include <sound/jack.h> @@ -1693,6 +1694,8 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = { "DFI LanParty", STAC_92HD71BXX_REF), SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fb, "HP dv4-1222nr", STAC_HP_DV4_1222NR), + SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x1720, + "HP", STAC_HP_DV5), SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x3080, "HP", STAC_HP_DV5), SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x30f0, @@ -4665,6 +4668,26 @@ static void stac92xx_unsol_event(struct hda_codec *codec, unsigned int res) } } +static int hp_bseries_system(u32 subsystem_id) +{ + switch (subsystem_id) { + case 0x103c307e: + case 0x103c307f: + case 0x103c3080: + case 0x103c3081: + case 0x103c1722: + case 0x103c1723: + case 0x103c1724: + case 0x103c1725: + case 0x103c1726: + case 0x103c1727: + case 0x103c1728: + case 0x103c1729: + return 1; + } + return 0; +} + #ifdef CONFIG_PROC_FS static void stac92hd_proc_hook(struct snd_info_buffer *buffer, struct hda_codec *codec, hda_nid_t nid) @@ -4754,6 +4777,11 @@ static int stac92xx_hp_check_power_status(struct hda_codec *codec, else spec->gpio_data |= spec->gpio_led; /* white */ + if (hp_bseries_system(codec->subsystem_id)) { + /* LED state is inverted on these systems */ + spec->gpio_data ^= spec->gpio_led; + } + stac_gpio_set(codec, spec->gpio_mask, spec->gpio_dir, spec->gpio_data); @@ -5243,6 +5271,7 @@ static int patch_stac92hd71bxx(struct hda_codec *codec) { struct sigmatel_spec *spec; struct hda_verb *unmute_init = stac92hd71bxx_unmute_core_init; + unsigned int pin_cfg; int err = 0; spec = kzalloc(sizeof(*spec), GFP_KERNEL); @@ -5426,6 +5455,45 @@ again: break; } + if (hp_bseries_system(codec->subsystem_id)) { + pin_cfg = snd_hda_codec_get_pincfg(codec, 0x0f); + if (get_defcfg_device(pin_cfg) == AC_JACK_LINE_OUT || + get_defcfg_device(pin_cfg) == AC_JACK_SPEAKER || + get_defcfg_device(pin_cfg) == AC_JACK_HP_OUT) { + /* It was changed in the BIOS to just satisfy MS DTM. + * Lets turn it back into slaved HP + */ + pin_cfg = (pin_cfg & (~AC_DEFCFG_DEVICE)) + | (AC_JACK_HP_OUT << + AC_DEFCFG_DEVICE_SHIFT); + pin_cfg = (pin_cfg & (~(AC_DEFCFG_DEF_ASSOC + | AC_DEFCFG_SEQUENCE))) + | 0x1f; + snd_hda_codec_set_pincfg(codec, 0x0f, pin_cfg); + } + } + + if ((codec->subsystem_id >> 16) == PCI_VENDOR_ID_HP) { + const struct dmi_device *dev = NULL; + while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, + NULL, dev))) { + if (strcmp(dev->name, "HP_Mute_LED_1")) { + switch (codec->vendor_id) { + case 0x111d7608: + spec->gpio_led = 0x01; + break; + case 0x111d7600: + case 0x111d7601: + case 0x111d7602: + case 0x111d7603: + spec->gpio_led = 0x08; + break; + } + break; + } + } + } + #ifdef CONFIG_SND_HDA_POWER_SAVE if (spec->gpio_led) { spec->gpio_mask |= spec->gpio_led; diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index 754867ed4785..aac20fb4aad2 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -1950,6 +1950,12 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = { }, { .subvendor = 0x104d, + .subdevice = 0x8144, + .name = "Sony", + .type = AC97_TUNE_INV_EAPD + }, + { + .subvendor = 0x104d, .subdevice = 0x8197, .name = "Sony S1XP", .type = AC97_TUNE_INV_EAPD diff --git a/sound/sh/aica.c b/sound/sh/aica.c index 583a3693df75..a0df401ebb9f 100644 --- a/sound/sh/aica.c +++ b/sound/sh/aica.c @@ -49,6 +49,7 @@ MODULE_AUTHOR("Adrian McMenamin <adrian@mcmen.demon.co.uk>"); MODULE_DESCRIPTION("Dreamcast AICA sound (pcm) driver"); MODULE_LICENSE("GPL"); MODULE_SUPPORTED_DEVICE("{{Yamaha/SEGA, AICA}}"); +MODULE_FIRMWARE("aica_firmware.bin"); /* module parameters */ #define CARD_NAME "AICA" diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c index 5735945788bf..6a829eef2a4f 100644 --- a/sound/soc/omap/omap-pcm.c +++ b/sound/soc/omap/omap-pcm.c @@ -195,8 +195,12 @@ static int omap_pcm_prepare(struct snd_pcm_substream *substream) else omap_enable_dma_irq(prtd->dma_ch, OMAP_DMA_FRAME_IRQ); - omap_set_dma_src_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16); - omap_set_dma_dest_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16); + if (!(cpu_class_is_omap1())) { + omap_set_dma_src_burst_mode(prtd->dma_ch, + OMAP_DMA_DATA_BURST_16); + omap_set_dma_dest_burst_mode(prtd->dma_ch, + OMAP_DMA_DATA_BURST_16); + } return 0; } diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.c b/sound/soc/s3c24xx/s3c64xx-i2s.c index 3c06c401d0fb..105a77eeded0 100644 --- a/sound/soc/s3c24xx/s3c64xx-i2s.c +++ b/sound/soc/s3c24xx/s3c64xx-i2s.c @@ -220,6 +220,8 @@ static __devinit int s3c64xx_iis_dev_probe(struct platform_device *pdev) goto err; } + clk_enable(i2s->iis_cclk); + ret = s3c_i2sv2_probe(pdev, dai, i2s, 0); if (ret) goto err_clk; diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index 8e7f78941ba6..e9a3a9dca15c 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -210,7 +210,7 @@ struct snd_usb_midi_endpoint_info { /* */ -#define combine_word(s) ((*s) | ((unsigned int)(s)[1] << 8)) +#define combine_word(s) ((*(s)) | ((unsigned int)(s)[1] << 8)) #define combine_triple(s) (combine_word(s) | ((unsigned int)(s)[2] << 16)) #define combine_quad(s) (combine_triple(s) | ((unsigned int)(s)[3] << 24)) |