diff options
| -rw-r--r-- | drivers/usb/chipidea/udc.c | 20 | ||||
| -rw-r--r-- | drivers/usb/dwc2/params.c | 9 | ||||
| -rw-r--r-- | drivers/usb/dwc2/platform.c | 9 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-ring.c | 15 | ||||
| -rw-r--r-- | drivers/usb/host/xhci.c | 25 | ||||
| -rw-r--r-- | drivers/usb/host/xhci.h | 9 |
6 files changed, 72 insertions, 15 deletions
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 829e947cabf5..6a5ee8e6da10 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -1622,6 +1622,25 @@ static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on) static int ci_udc_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver); static int ci_udc_stop(struct usb_gadget *gadget); + +/* Match ISOC IN from the highest endpoint */ +static struct usb_ep *ci_udc_match_ep(struct usb_gadget *gadget, + struct usb_endpoint_descriptor *desc, + struct usb_ss_ep_comp_descriptor *comp_desc) +{ + struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget); + struct usb_ep *ep; + + if (usb_endpoint_xfer_isoc(desc) && usb_endpoint_dir_in(desc)) { + list_for_each_entry_reverse(ep, &ci->gadget.ep_list, ep_list) { + if (ep->caps.dir_in && !ep->claimed) + return ep; + } + } + + return NULL; +} + /** * Device operations part of the API to the USB controller hardware, * which don't involve endpoints (or i/o) @@ -1635,6 +1654,7 @@ static const struct usb_gadget_ops usb_gadget_ops = { .vbus_draw = ci_udc_vbus_draw, .udc_start = ci_udc_start, .udc_stop = ci_udc_stop, + .match_ep = ci_udc_match_ep, }; static int init_eps(struct ci_hdrc *ci) diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index 6900eea57526..5949262ff669 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -253,6 +253,15 @@ static void dwc2_set_param_phy_utmi_width(struct dwc2_hsotg *hsotg) val = (hsotg->hw_params.utmi_phy_data_width == GHWCFG4_UTMI_PHY_DATA_WIDTH_8) ? 8 : 16; + if (hsotg->phy) { + /* + * If using the generic PHY framework, check if the PHY bus + * width is 8-bit and set the phyif appropriately. + */ + if (phy_get_bus_width(hsotg->phy) == 8) + val = 8; + } + hsotg->params.phy_utmi_width = val; } diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index d10a7f8daec3..e98d7812da2d 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -271,15 +271,6 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg) hsotg->plat = dev_get_platdata(hsotg->dev); - if (hsotg->phy) { - /* - * If using the generic PHY framework, check if the PHY bus - * width is 8-bit and set the phyif appropriately. - */ - if (phy_get_bus_width(hsotg->phy) == 8) - hsotg->params.phy_utmi_width = 8; - } - /* Clock */ hsotg->clk = devm_clk_get_optional(hsotg->dev, "otg"); if (IS_ERR(hsotg->clk)) { diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index feffceb31e8a..121782e22c01 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1612,8 +1612,13 @@ static void handle_port_status(struct xhci_hcd *xhci, usb_hcd_resume_root_hub(hcd); } - if (hcd->speed >= HCD_USB3 && (portsc & PORT_PLS_MASK) == XDEV_INACTIVE) + if (hcd->speed >= HCD_USB3 && + (portsc & PORT_PLS_MASK) == XDEV_INACTIVE) { + slot_id = xhci_find_slot_id_by_port(hcd, xhci, hcd_portnum + 1); + if (slot_id && xhci->devs[slot_id]) + xhci->devs[slot_id]->flags |= VDEV_PORT_ERROR; bus_state->port_remote_wakeup &= ~(1 << hcd_portnum); + } if ((portsc & PORT_PLC) && (portsc & PORT_PLS_MASK) == XDEV_RESUME) { xhci_dbg(xhci, "port resume event for port %d\n", port_id); @@ -1801,6 +1806,14 @@ static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci, { struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index]; struct xhci_command *command; + + /* + * Avoid resetting endpoint if link is inactive. Can cause host hang. + * Device will be reset soon to recover the link so don't do anything + */ + if (xhci->devs[slot_id]->flags & VDEV_PORT_ERROR) + return; + command = xhci_alloc_command(xhci, false, GFP_ATOMIC); if (!command) return; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 20db378a6012..3f79f35d0b19 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1466,6 +1466,10 @@ static int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flag xhci_dbg(xhci, "urb submitted during PCI suspend\n"); return -ESHUTDOWN; } + if (xhci->devs[slot_id]->flags & VDEV_PORT_ERROR) { + xhci_dbg(xhci, "Can't queue urb, port error, link inactive\n"); + return -ENODEV; + } if (usb_endpoint_xfer_isoc(&urb->ep->desc)) num_tds = urb->number_of_packets; @@ -3754,6 +3758,7 @@ static int xhci_discover_or_reset_device(struct usb_hcd *hcd, } /* If necessary, update the number of active TTs on this root port */ xhci_update_tt_active_eps(xhci, virt_dev, old_active_eps); + virt_dev->flags = 0; ret = 0; command_cleanup: @@ -5060,16 +5065,26 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) } else { /* * Some 3.1 hosts return sbrn 0x30, use xhci supported protocol - * minor revision instead of sbrn + * minor revision instead of sbrn. Minor revision is a two digit + * BCD containing minor and sub-minor numbers, only show minor. */ - minor_rev = xhci->usb3_rhub.min_rev; - if (minor_rev) { + minor_rev = xhci->usb3_rhub.min_rev / 0x10; + + switch (minor_rev) { + case 2: + hcd->speed = HCD_USB32; + hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS; + hcd->self.root_hub->rx_lanes = 2; + hcd->self.root_hub->tx_lanes = 2; + break; + case 1: hcd->speed = HCD_USB31; hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS; + break; } - xhci_info(xhci, "Host supports USB 3.%x %s SuperSpeed\n", + xhci_info(xhci, "Host supports USB 3.%x %sSuperSpeed\n", minor_rev, - minor_rev ? "Enhanced" : ""); + minor_rev ? "Enhanced " : ""); xhci->usb3_rhub.hcd = hcd; /* xHCI private pointer was set in xhci_pci_probe for the second diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 7f8b950d1a73..92e764c54154 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1010,6 +1010,15 @@ struct xhci_virt_device { u8 real_port; struct xhci_interval_bw_table *bw_table; struct xhci_tt_bw_info *tt_info; + /* + * flags for state tracking based on events and issued commands. + * Software can not rely on states from output contexts because of + * latency between events and xHC updating output context values. + * See xhci 1.1 section 4.8.3 for more details + */ + unsigned long flags; +#define VDEV_PORT_ERROR BIT(0) /* Port error, link inactive */ + /* The current max exit latency for the enabled USB3 link states. */ u16 current_mel; /* Used for the debugfs interfaces. */ |