diff options
44 files changed, 1741 insertions, 183 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a6373026a154..e10d9e998c23 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -569,17 +569,22 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-geam.dtb \ imx6ul-isiot-emmc.dtb \ imx6ul-isiot-nand.dtb \ + imx6ul-kontron-n6310-s.dtb \ + imx6ul-kontron-n6310-s-43.dtb \ imx6ul-liteboard.dtb \ imx6ul-opos6uldev.dtb \ imx6ul-pico-hobbit.dtb \ imx6ul-pico-pi.dtb \ - imx6ul-phytec-phyboard-segin-full.dtb \ + imx6ul-phytec-segin-ff-rdk-nand.dtb \ imx6ul-tx6ul-0010.dtb \ imx6ul-tx6ul-0011.dtb \ imx6ul-tx6ul-mainboard.dtb \ imx6ull-14x14-evk.dtb \ imx6ull-colibri-eval-v3.dtb \ imx6ull-colibri-wifi-eval-v3.dtb \ + imx6ull-phytec-segin-ff-rdk-nand.dtb \ + imx6ull-phytec-segin-ff-rdk-emmc.dtb \ + imx6ull-phytec-segin-lc-rdk-nand.dtb \ imx6ulz-14x14-evk.dtb dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ @@ -594,6 +599,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-sdb.dtb \ imx7d-sdb-reva.dtb \ imx7d-sdb-sht11.dtb \ + imx7d-zii-rmu2.dtb \ imx7d-zii-rpu2.dtb \ imx7s-colibri-eval-v3.dtb \ imx7s-mba7.dtb \ diff --git a/arch/arm/boot/dts/ep7211-edb7211.dts b/arch/arm/boot/dts/ep7211-edb7211.dts index a0c270f63fee..da076479c8e2 100644 --- a/arch/arm/boot/dts/ep7211-edb7211.dts +++ b/arch/arm/boot/dts/ep7211-edb7211.dts @@ -25,11 +25,11 @@ display: display { model = "320x240x4"; - native-mode = <&timing0>; bits-per-pixel = <4>; ac-prescale = <17>; display-timings { + native-mode = <&timing0>; timing0: 320x240 { hactive = <320>; hback-porch = <0>; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts index dbecd6d2cfc4..7d4301b22b90 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts @@ -14,8 +14,8 @@ bits-per-pixel = <16>; fsl,pcr = <0xcad08b80>; bus-width = <18>; - native-mode = <&qvga_timings>; display-timings { + native-mode = <&qvga_timings>; qvga_timings: 320x240 { clock-frequency = <6500000>; hactive = <320>; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts index ad2f7e879831..80a7f96de4c6 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts @@ -14,8 +14,8 @@ bits-per-pixel = <16>; fsl,pcr = <0xfa208b80>; bus-width = <18>; - native-mode = <&dvi_svga_timings>; display-timings { + native-mode = <&dvi_svga_timings>; dvi_svga_timings: 800x600 { clock-frequency = <40000000>; hactive = <800>; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts index d60d8f464ca9..24027a1fb46d 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts @@ -14,8 +14,8 @@ bits-per-pixel = <16>; fsl,pcr = <0xfa208b80>; bus-width = <18>; - native-mode = <&dvi_vga_timings>; display-timings { + native-mode = <&dvi_vga_timings>; dvi_vga_timings: 640x480 { clock-frequency = <31250000>; hactive = <640>; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index f8544a9e4633..05cccd12624c 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -76,8 +76,8 @@ bits-per-pixel = <16>; fsl,pcr = <0xfa208b80>; bus-width = <18>; - native-mode = <&wvga_timings>; display-timings { + native-mode = <&wvga_timings>; wvga_timings: 640x480 { hactive = <640>; vactive = <480>; diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts index 087c6e237af0..6f1e8ce9e76e 100644 --- a/arch/arm/boot/dts/imx27-apf27dev.dts +++ b/arch/arm/boot/dts/imx27-apf27dev.dts @@ -12,10 +12,10 @@ display: display { model = "Chimei-LW700AT9003"; - native-mode = <&timing0>; bits-per-pixel = <16>; /* non-standard but required */ fsl,pcr = <0xfae80083>; /* non-standard but required */ display-timings { + native-mode = <&timing0>; timing0: 800x480 { clock-frequency = <33000033>; hactive = <800>; diff --git a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts index 84fc8df4be7c..9c3ec82ec7e5 100644 --- a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts +++ b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts @@ -11,11 +11,11 @@ display0: CMO-QVGA { model = "CMO-QVGA"; - native-mode = <&timing0>; bits-per-pixel = <16>; fsl,pcr = <0xfad08b80>; display-timings { + native-mode = <&timing0>; timing0: 320x240 { clock-frequency = <6500000>; hactive = <320>; diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts index 5e5e282ed30e..0cd75dadf292 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts @@ -15,10 +15,10 @@ display: display { model = "Primeview-PD050VL1"; - native-mode = <&timing0>; bits-per-pixel = <16>; /* non-standard but required */ fsl,pcr = <0xf0c88080>; /* non-standard but required */ display-timings { + native-mode = <&timing0>; timing0: 640x480 { hactive = <640>; vactive = <480>; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts index 5606f417e9e8..bf883e45576a 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -14,11 +14,11 @@ display0: LQ035Q7 { model = "Sharp-LQ035Q7"; - native-mode = <&timing0>; bits-per-pixel = <16>; fsl,pcr = <0xf00080c0>; display-timings { + native-mode = <&timing0>; timing0: 240x320 { clock-frequency = <5500000>; hactive = <240>; diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts index 10acc5331ba6..719ed5ca454a 100644 --- a/arch/arm/boot/dts/imx53-m53menlo.dts +++ b/arch/arm/boot/dts/imx53-m53menlo.dts @@ -54,7 +54,8 @@ }; panel { - compatible = "edt,etm070080dh6"; + compatible = "edt,etm0700g0dh6"; + pinctrl-0 = <&pinctrl_display_gpio>; enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; port { diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index 1beac22266ed..019dda6b88ad 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -140,7 +140,18 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; + phy-handle = <ðphy>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + reg = <0>; + micrel,led-mode = <0>; + }; + }; }; &hdmi { diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index 7a85116ef1d2..2418cf8f2317 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -556,8 +556,6 @@ non-removable; vmmc-supply = <®_3p3v>; vqmmc-supply = <®_wlan_vmmc>; - vqmmc-1-8-v; - ocr-limit = <0x180>; /* 1.65v - 2.1v */ cap-power-off-card; keep-power-in-suspend; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi index 82802f8ce7a0..d434868e870a 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi @@ -128,7 +128,7 @@ }; rtc@51 { - compatible = "nxp,rtc8564"; + compatible = "epson,rtc8564"; reg = <0x51>; }; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index 50d9a989e06a..2cfb4112a467 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -33,6 +33,30 @@ spdif-out; }; + reg_1p5v: regulator-1p5v { + compatible = "regulator-fixed"; + regulator-name = "1P5V"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_2p8v: regulator-2p8v { + compatible = "regulator-fixed"; + regulator-name = "2P8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + reg_2p5v: regulator-2p5v { compatible = "regulator-fixed"; regulator-name = "2P5V"; @@ -94,6 +118,29 @@ VDDIO-supply = <®_3p3v>; lrclk-strength = <3>; }; + + camera@3c { + compatible = "ovti,ov5645"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5645>; + reg = <0x3c>; + clocks = <&clks IMX6QDL_CLK_CKO2>; + clock-names = "xclk"; + clock-frequency = <24000000>; + vdddo-supply = <®_1p8v>; + vdda-supply = <®_2p8v>; + vddd-supply = <®_1p5v>; + enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; + + port { + ov5645_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; }; &iomuxc { @@ -128,7 +175,6 @@ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 >; }; @@ -152,6 +198,14 @@ >; }; + pinctrl_ov5645: ov5645grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__CCM_CLKO2 0x000b0 + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1b0b0 @@ -226,12 +280,23 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; - interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, - <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; - fsl,err006687-workaround-present; status = "okay"; }; +&mipi_csi { + status = "okay"; + + port@0 { + reg = <0>; + + mipi_csi2_in: endpoint { + remote-endpoint = <&ov5645_to_mipi_csi2>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; +}; + &spdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spdif>; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 4b801935cad1..e6b4b8525f98 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -171,8 +171,6 @@ gpmi: gpmi-nand@112000 { compatible = "fsl,imx6q-gpmi-nand"; - #address-cells = <1>; - #size-cells = <1>; reg = <0x00112000 0x2000>, <0x00114000 0x2000>; reg-names = "gpmi-nand", "bch"; interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; @@ -695,7 +693,7 @@ }; anatop: anatop@20c8000 { - compatible = "fsl,imx6q-anatop", "syscon", "simple-bus"; + compatible = "fsl,imx6q-anatop", "syscon", "simple-mfd"; reg = <0x020c8000 0x1000>; interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>, <0 54 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index b36fc012ff06..3a96b5538a2a 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -77,15 +77,6 @@ }; }; - intc: interrupt-controller@a01000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x00a01000 0x1000>, - <0x00a00100 0x100>; - interrupt-parent = <&intc>; - }; - clocks { ckil { compatible = "fixed-clock"; @@ -133,6 +124,15 @@ clocks = <&clks IMX6SL_CLK_OCRAM>; }; + intc: interrupt-controller@a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; + interrupt-parent = <&intc>; + }; + L2: l2-cache@a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index b0a77ff70b67..13c7ba7fa6bc 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -75,15 +75,6 @@ }; }; - intc: interrupt-controller@a01000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x00a01000 0x1000>, - <0x00a00100 0x100>; - interrupt-parent = <&intc>; - }; - ckil: clock-ckil { compatible = "fixed-clock"; #clock-cells = <0>; @@ -134,6 +125,15 @@ reg = <0x00900000 0x20000>; }; + intc: interrupt-controller@a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; + interrupt-parent = <&intc>; + }; + L2: l2-cache@a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; @@ -234,7 +234,7 @@ compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02018000 0x4000>; - interrupts =<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; dma-names = "rx", "tx"; clocks = <&clks IMX6SLL_CLK_UART4_IPG>, @@ -621,7 +621,7 @@ }; sdma: dma-controller@20ec000 { - compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma"; + compatible = "fsl,imx6sll-sdma", "fsl,imx6ul-sdma"; reg = <0x020ec000 0x4000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SLL_CLK_IPG>, @@ -801,7 +801,7 @@ compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f4000 0x4000>; - interrupts =<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; dma-names = "rx", "tx"; clocks = <&clks IMX6SLL_CLK_UART5_IPG>, diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index bb25add90f19..531a52c1e987 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -90,15 +90,6 @@ }; }; - intc: interrupt-controller@a01000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x00a01000 0x1000>, - <0x00a00100 0x100>; - interrupt-parent = <&intc>; - }; - ckil: clock-ckil { compatible = "fixed-clock"; #clock-cells = <0>; @@ -181,6 +172,15 @@ clocks = <&clks IMX6SX_CLK_OCRAM>; }; + intc: interrupt-controller@a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; + interrupt-parent = <&intc>; + }; + L2: l2-cache@a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; @@ -926,8 +926,8 @@ <&clks IMX6SX_CLK_ENET_PTP>; clock-names = "ipg", "ahb", "ptp", "enet_clk_ref", "enet_out"; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts new file mode 100644 index 000000000000..5bad29683cc3 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts @@ -0,0 +1,102 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org> + */ + +#include "imx6ul-kontron-n6310-s.dts" + +/ { + model = "Kontron N6310 S 43"; + compatible = "kontron,imx6ul-n6310-s-43", "kontron,imx6ul-n6310-s", + "kontron,imx6ul-n6310-som", "fsl,imx6ul"; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm7 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; +}; + +&i2c4 { + touchscreen@5d { + compatible = "goodix,gt928"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cap_touch>; + interrupt-parent = <&gpio5>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>; + irq-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; + /* Leave status disabled because of missing display panel node */ +}; + +&pwm7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm7>; + status = "okay"; +}; + +&iomuxc { + pinctrl_cap_touch: captouchgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b0b0 /* Touch Interrupt */ + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0 /* Touch Reset */ + MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x1b0b0 /* Touch Wake */ + >; + }; + + pinctrl_lcdif_ctrl: lcdifctrlgrp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 + MX6UL_PAD_LCD_RESET__LCDIF_RESET 0x79 + >; + }; + + pinctrl_lcdif_dat: lcdifdatgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 + MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79 + MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79 + MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79 + MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79 + MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79 + MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79 + >; + }; + + pinctrl_pwm7: pwm7grp { + fsl,pins = < + MX6UL_PAD_CSI_VSYNC__PWM7_OUT 0x110b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts new file mode 100644 index 000000000000..0205fd56d975 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts @@ -0,0 +1,420 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org> + */ + +/dts-v1/; + +#include "imx6ul-kontron-n6310-som.dtsi" + +/ { + model = "Kontron N6310 S"; + compatible = "kontron,imx6ul-n6310-s", "kontron,imx6ul-n6310-som", + "fsl,imx6ul"; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led1 { + label = "debug-led1"; + gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + + led2 { + label = "debug-led2"; + gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led3 { + label = "debug-led3"; + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + pwm-beeper { + compatible = "pwm-beeper"; + pwms = <&pwm8 0 5000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vref_adc: regulator-vref-adc { + compatible = "regulator-fixed"; + regulator-name = "vref-adc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; + num-channels = <3>; + vref-supply = <®_vref_adc>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + eeprom@0 { + compatible = "anvo,anv32e61w", "atmel,at25"; + reg = <0>; + spi-max-frequency = <20000000>; + spi-cpha; + spi-cpol; + pagesize = <1>; + size = <8192>; + address-width = <16>; + }; +}; + +&fec1 { + pinctrl-0 = <&pinctrl_enet1>; + /delete-node/ mdio; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>; + phy-mode = "rmii"; + phy-handle = <ðphy2>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + micrel,led-mode = <0>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + micrel,led-mode = <0>; + clocks = <&clks IMX6UL_CLK_ENET2_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; +}; + +&pwm8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm8>; + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + linux,rs485-enabled-at-boot-time; + rs485-rx-during-tx; + rs485-rts-active-low; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + dr_mode = "otg"; + srp-disable; + hnp-disable; + adp-disable; + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_3v3>; + voltage-ranges = <3300 3300>; + no-1-8-v; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + non-removable; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_3v3>; + voltage-ranges = <3300 3300>; + no-1-8-v; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>; + + pinctrl_adc1: adc1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0xb0 + >; + }; + + /* FRAM */ + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x100b1 + MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x100b1 + MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x100b1 + MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x100b1 /* ECSPI1-CS1 */ + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b009 + >; + }; + + pinctrl_enet2_mdio: enet2mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp{ + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 /* DOUT1 */ + MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x1b0b0 /* DIN1 */ + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x1b0b0 /* DOUT2 */ + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0b0 /* DIN2 */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b0b0 /* LED H14 */ + MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x1b0b0 /* LED H15 */ + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 /* LED H16 */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x4001f8b0 + MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x4001f8b0 + >; + }; + + pinctrl_pwm8: pwm8grp { + fsl,pins = < + MX6UL_PAD_CSI_HSYNC__PWM8_OUT 0x110b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_NAND_DATA04__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_NAND_DATA05__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS 0x1b0b1 + /* + * mux unused RTS to make sure it doesn't cause + * any interrupts when it is undefined + */ + MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 + MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b0b1 + MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1 + MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1 { + fsl,pins = < + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x100b1 /* SD1_CD */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10059 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x30b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi new file mode 100644 index 000000000000..a896b2348dd2 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi @@ -0,0 +1,134 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 exceet electronics GmbH + * Copyright (C) 2018 Kontron Electronics GmbH + * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org> + */ + +#include "imx6ul.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Kontron N6310 SOM"; + compatible = "kontron,imx6ul-n6310-som", "fsl,imx6ul"; + + memory@80000000 { + reg = <0x80000000 0x10000000>; + device_type = "memory"; + }; +}; + +&ecspi2 { + cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; + + spi-flash@0 { + compatible = "mxicy,mx25v8035f", "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + micrel,led-mode = <0>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&fec2 { + phy-mode = "rmii"; + status = "disabled"; +}; + +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + spi-max-frequency = <108000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + reg = <0>; + + partition@0 { + label = "ubi1"; + reg = <0x00000000 0x08000000>; + }; + + partition@8000000 { + label = "ubi2"; + reg = <0x08000000 0x08000000>; + }; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reset_out>; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x100b1 + MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x100b1 + MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x100b1 + MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x100b1 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b009 + >; + }; + + pinctrl_enet1_mdio: enet1mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + >; + }; + + pinctrl_qspi: qspigrp { + fsl,pins = < + MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1 + MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1 + MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1 + MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1 + MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1 + MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 + >; + }; + + pinctrl_reset_out: rstoutgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-opos6uldev.dts b/arch/arm/boot/dts/imx6ul-opos6uldev.dts index 0e59ee57fd55..8ecdb9ad2b2e 100644 --- a/arch/arm/boot/dts/imx6ul-opos6uldev.dts +++ b/arch/arm/boot/dts/imx6ul-opos6uldev.dts @@ -56,7 +56,7 @@ stdout-path = &uart1; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm3 0 191000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -97,6 +97,18 @@ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; }; + panel: panel { + compatible = "armadeus,st0700-adapt"; + power-supply = <®_3v3>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&lcdif_out>; + }; + }; + }; + reg_5v: regulator-5v { compatible = "regulator-fixed"; regulator-name = "5V"; @@ -182,28 +194,11 @@ &lcdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif>; - display = <&display0>; - lcd-supply = <®_3v3>; status = "okay"; - display0: display0 { - bits-per-pixel = <32>; - bus-width = <18>; - - display-timings { - timing0: timing0 { - clock-frequency = <33000033>; - hactive = <800>; - vactive = <480>; - hback-porch = <96>; - hfront-porch = <96>; - vback-porch = <20>; - vfront-porch = <21>; - hsync-len = <64>; - vsync-len = <4>; - de-active = <1>; - pixelclk-active = <0>; - }; + port { + lcdif_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; diff --git a/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi index fc2997449b49..41f3b7f62bbf 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi +++ b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi @@ -7,10 +7,9 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pwm/pwm.h> -#include "imx6ul.dtsi" / { - model = "Phytec phyCORE i.MX6 UltraLite"; + model = "PHYTEC phyCORE-i.MX6 UltraLite"; compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul"; chosen { @@ -31,8 +30,7 @@ pinctrl-0 = <&pinctrl_gpioleds_som>; compatible = "gpio-leds"; - led_green { - label = "phycore:green"; + phycore-green { gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; @@ -43,20 +41,21 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; phy-mode = "rmii"; - phy-handle = <ðphy0>; - status = "okay"; + phy-handle = <ðphy1>; + status = "disabled"; mdio: mdio { #address-cells = <1>; #size-cells = <0>; - ethphy0: ethernet-phy@1 { + ethphy1: ethernet-phy@1 { reg = <1>; interrupt-parent = <&gpio1>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; clocks = <&clks IMX6UL_CLK_ENET_REF>; clock-names = "rmii-ref"; + status = "disabled"; }; }; }; @@ -65,12 +64,12 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpmi_nand>; nand-on-flash-bbt; - status = "okay"; + status = "disabled"; }; &i2c1 { pinctrl-names = "default"; - pinctrl-0 =<&pinctrl_i2c1>; + pinctrl-0 = <&pinctrl_i2c1>; clock-frequency = <100000>; status = "okay"; @@ -90,19 +89,28 @@ status = "okay"; }; +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <8>; + no-1-8-v; + non-removable; + status = "disabled"; +}; + &iomuxc { pinctrl_enet1: enet1grp { fsl,pins = < - MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 - MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x10010 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x10010 MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 - MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 - MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 - MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 - MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b010 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b010 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b010 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b010 MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x17059 >; }; @@ -145,4 +153,19 @@ >; }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9 + >; + }; + }; diff --git a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts index b6a1407a9d44..699dfcbf9a60 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts +++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts @@ -5,13 +5,15 @@ */ /dts-v1/; -#include "imx6ul-phytec-pcl063.dtsi" -#include "imx6ul-phytec-phyboard-segin.dtsi" -#include "imx6ul-phytec-peb-eval-01.dtsi" +#include "imx6ul.dtsi" +#include "imx6ul-phytec-phycore-som.dtsi" +#include "imx6ul-phytec-segin.dtsi" +#include "imx6ul-phytec-segin-peb-eval-01.dtsi" / { - model = "Phytec phyBOARD-Segin i.MX6 UltraLite Full Featured"; - compatible = "phytec,imx6ul-pbacd10", "phytec,imx6ul-pcl063", "fsl,imx6ul"; + model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with NAND"; + compatible = "phytec,imx6ul-pbacd10-nand", "phytec,imx6ul-pbacd10", + "phytec,imx6ul-pcl063", "fsl,imx6ul"; }; &adc1 { @@ -27,9 +29,18 @@ }; &ecspi3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi3>; - cs-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +ðphy1 { + status = "okay"; +}; + +ðphy2 { + status = "okay"; +}; + +&fec1 { status = "okay"; }; @@ -37,6 +48,10 @@ status = "okay"; }; +&gpmi { + status = "okay"; +}; + &i2c_rtc { status = "okay"; }; @@ -76,14 +91,3 @@ &usdhc1 { status = "okay"; }; - -&iomuxc { - pinctrl_ecspi3: ecspi3grp { - fsl,pins = < - MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x10b0 - MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0 - MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0 - MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x10b0 - >; - }; -}; diff --git a/arch/arm/boot/dts/imx6ul-phytec-peb-eval-01.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi index e2f38f39a6ad..2f3fd32a1167 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-peb-eval-01.dtsi +++ b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi @@ -21,20 +21,22 @@ }; }; - user_leds: leds { + user_leds: user-leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_user_leds>; status = "disabled"; - led_yellow { - gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; + user-led1 { + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "on"; }; - led_red { - gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; + user-led2 { + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "on"; }; }; }; diff --git a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi index 7bf439a77d2c..8d5f8dc6ad58 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin.dtsi +++ b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi @@ -5,7 +5,7 @@ */ / { - model = "Phytec phyBOARD-Segin i.MX6 UltraLite"; + model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite"; compatible = "phytec,imx6ul-pbacd-10", "phytec,imx6ul-pcl063", "fsl,imx6ul"; aliases { @@ -103,11 +103,18 @@ assigned-clock-rates = <786432000>; }; +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; + status = "disabled"; +}; + &fec2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet2>; phy-mode = "rmii"; - phy-handle = <ðphy1>; + phy-handle = <ðphy2>; status = "disabled"; }; @@ -160,11 +167,12 @@ }; &mdio { - ethphy1: ethernet-phy@2 { + ethphy2: ethernet-phy@2 { reg = <2>; micrel,led-mode = <1>; clocks = <&clks IMX6UL_CLK_ENET2_REF>; clock-names = "rmii-ref"; + status = "disabled"; }; }; @@ -224,16 +232,25 @@ >; }; + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x10b0 + MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0 + MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0 + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x10b0 + >; + }; + pinctrl_enet2: enet2grp { fsl,pins = < MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 - MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 - MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 - MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b010 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b010 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b010 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b010 >; }; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 81d4b4925127..f008036e9294 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -93,18 +93,6 @@ }; }; - intc: interrupt-controller@a01000 { - compatible = "arm,gic-400", "arm,cortex-a7-gic"; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; - #interrupt-cells = <3>; - interrupt-controller; - interrupt-parent = <&intc>; - reg = <0x00a01000 0x1000>, - <0x00a02000 0x2000>, - <0x00a04000 0x2000>, - <0x00a06000 0x2000>; - }; - timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, @@ -171,6 +159,18 @@ reg = <0x00900000 0x20000>; }; + intc: interrupt-controller@a01000 { + compatible = "arm,gic-400", "arm,cortex-a7-gic"; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&intc>; + reg = <0x00a01000 0x1000>, + <0x00a02000 0x2000>, + <0x00a04000 0x2000>, + <0x00a06000 0x2000>; + }; + dma_apbh: dma-apbh@1804000 { compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x01804000 0x2000>; @@ -227,6 +227,8 @@ clocks = <&clks IMX6UL_CLK_ECSPI1>, <&clks IMX6UL_CLK_ECSPI1>; clock-names = "ipg", "per"; + dmas = <&sdma 3 7 1>, <&sdma 4 7 2>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -239,6 +241,8 @@ clocks = <&clks IMX6UL_CLK_ECSPI2>, <&clks IMX6UL_CLK_ECSPI2>; clock-names = "ipg", "per"; + dmas = <&sdma 5 7 1>, <&sdma 6 7 2>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -251,6 +255,8 @@ clocks = <&clks IMX6UL_CLK_ECSPI3>, <&clks IMX6UL_CLK_ECSPI3>; clock-names = "ipg", "per"; + dmas = <&sdma 7 7 1>, <&sdma 8 7 2>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -263,6 +269,8 @@ clocks = <&clks IMX6UL_CLK_ECSPI4>, <&clks IMX6UL_CLK_ECSPI4>; clock-names = "ipg", "per"; + dmas = <&sdma 9 7 1>, <&sdma 10 7 2>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -510,8 +518,8 @@ <&clks IMX6UL_CLK_ENET2_REF_125M>; clock-names = "ipg", "ahb", "ptp", "enet_clk_ref", "enet_out"; - fsl,num-tx-queues=<1>; - fsl,num-rx-queues=<1>; + fsl,num-tx-queues = <1>; + fsl,num-rx-queues = <1>; status = "disabled"; }; @@ -845,8 +853,8 @@ <&clks IMX6UL_CLK_ENET_REF>; clock-names = "ipg", "ahb", "ptp", "enet_clk_ref", "enet_out"; - fsl,num-tx-queues=<1>; - fsl,num-rx-queues=<1>; + fsl,num-tx-queues = <1>; + fsl,num-rx-queues = <1>; status = "disabled"; }; @@ -858,7 +866,7 @@ <&clks IMX6UL_CLK_USDHC1>, <&clks IMX6UL_CLK_USDHC1>; clock-names = "ipg", "ahb", "per"; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; fsl,tuning-start-tap = <20>; bus-width = <4>; status = "disabled"; @@ -873,7 +881,7 @@ <&clks IMX6UL_CLK_USDHC2>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; fsl,tuning-start-tap = <20>; status = "disabled"; }; @@ -957,6 +965,15 @@ }; }; + csi: csi@21c4000 { + compatible = "fsl,imx6ul-csi", "fsl,imx7-csi"; + reg = <0x021c4000 0x4000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_CSI>; + clock-names = "mclk"; + status = "disabled"; + }; + lcdif: lcdif@21c8000 { compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif"; reg = <0x021c8000 0x4000>; diff --git a/arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi new file mode 100644 index 000000000000..56cd16e5a77f --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 PHYTEC Messtechnik GmbH + * Author: Stefan Riedmueller <s.riedmueller@phytec.de> + */ + +#include "imx6ul-phytec-phycore-som.dtsi" + +/ { + model = "PHYTEC phyCORE-i.MX6 ULL"; + compatible = "phytec,imx6ull-pcl063", "fsl,imx6ull"; +}; + +&iomuxc { + /delete-node/ gpioledssomgrp; +}; + +&iomuxc_snvs { + pinctrl_gpioleds_som: gpioledssomgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts new file mode 100644 index 000000000000..9648d4ecaf58 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 PHYTEC Messtechnik GmbH + * Author: Stefan Riedmueller <s.riedmueller@phytec.de> + */ + +/dts-v1/; +#include "imx6ull.dtsi" +#include "imx6ull-phytec-phycore-som.dtsi" +#include "imx6ull-phytec-segin.dtsi" +#include "imx6ull-phytec-segin-peb-eval-01.dtsi" + +/ { + model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with eMMC"; + compatible = "phytec,imx6ull-pbacd10-emmc", "phytec,imx6ull-pbacd10", + "phytec,imx6ull-pcl063","fsl,imx6ull"; +}; + +&adc1 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&tlv320 { + status = "okay"; +}; + +&ecspi3 { + status = "okay"; +}; + +ðphy1 { + status = "okay"; +}; + +ðphy2 { + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +&fec2 { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +®_can1_en { + status = "okay"; +}; + +®_sound_1v8 { + status = "okay"; +}; + +®_sound_3v3 { + status = "okay"; +}; + +&sai2 { + status = "okay"; +}; + +&sound { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbotg1 { + status = "okay"; +}; + +&usbotg2 { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; + +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts new file mode 100644 index 000000000000..656baf846453 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 PHYTEC Messtechnik GmbH + * Author: Stefan Riedmueller <s.riedmueller@phytec.de> + */ + +/dts-v1/; +#include "imx6ull.dtsi" +#include "imx6ull-phytec-phycore-som.dtsi" +#include "imx6ull-phytec-segin.dtsi" +#include "imx6ull-phytec-segin-peb-eval-01.dtsi" + +/ { + model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with NAND"; + compatible = "phytec,imx6ull-pbacd10-nand", "phytec,imx6ull-pbacd10", + "phytec,imx6ull-pcl063", "fsl,imx6ull"; +}; + +&adc1 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&tlv320 { + status = "okay"; +}; + +&ecspi3 { + status = "okay"; +}; + +ðphy1 { + status = "okay"; +}; + +ðphy2 { + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +&fec2 { + status = "okay"; +}; + +&gpmi { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +®_can1_en { + status = "okay"; +}; + +®_sound_1v8 { + status = "okay"; +}; + +®_sound_3v3 { + status = "okay"; +}; + +&sai2 { + status = "okay"; +}; + +&sound { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbotg1 { + status = "okay"; +}; + +&usbotg2 { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts new file mode 100644 index 000000000000..e168494e0a6d --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 PHYTEC Messtechnik GmbH + * Author: Stefan Riedmueller <s.riedmueller@phytec.de> + */ + +/dts-v1/; +#include "imx6ull.dtsi" +#include "imx6ull-phytec-phycore-som.dtsi" +#include "imx6ull-phytec-segin.dtsi" +#include "imx6ull-phytec-segin-peb-eval-01.dtsi" + +/ { + model = "PHYTEC phyBOARD-Segin i.MX6 ULL Low Cost with NAND"; + compatible = "phytec,imx6ull-pbacd10-nand", "phytec,imx6ull-pbacd10", + "phytec,imx6ull-pcl063", "fsl,imx6ull"; +}; + +&adc1 { + status = "okay"; +}; + +ðphy1 { + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +&gpmi { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +&usbotg1 { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi new file mode 100644 index 000000000000..ff08d95a1aa2 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 PHYTEC Messtechnik GmbH + * Author: Stefan Riedmueller <s.riedmueller@phytec.de> + */ + +#include "imx6ul-phytec-segin-peb-eval-01.dtsi" + +&iomuxc { + /delete-node/ gpio_keysgrp; +}; + +&iomuxc_snvs { + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x79 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi new file mode 100644 index 000000000000..c1595fc785f7 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 PHYTEC Messtechnik GmbH + * Author: Stefan Riedmueller <s.riedmueller@phytec.de> + */ + +#include "imx6ul-phytec-segin.dtsi" + +/ { + model = "PHYTEC phyBOARD-Segin i.MX6 ULL"; + compatible = "phytec,imx6ull-pbacd-10", "phytec,imx6ull-pcl063","fsl,imx6ull"; +}; + +&iomuxc { + /delete-node/ flexcan1engrp; + /delete-node/ rtcintgrp; + /delete-node/ stmpegrp; +}; + +&iomuxc_snvs { + princtrl_flexcan1_en: flexcan1engrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x17059 + >; + }; + + pinctrl_rtc_int: rtcintgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059 + >; + }; + + pinctrl_stmpe: stmpegrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index 895fbde4d433..917eb0b58b13 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -54,6 +54,7 @@ regulator-name = "+V3.3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; reg_module_3v3_avdd: regulator-module-3v3-avdd { @@ -61,6 +62,7 @@ regulator-name = "+V3.3_AVDD_AUDIO"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; sound { @@ -99,8 +101,9 @@ }; &fec1 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&pinctrl_enet1>; + pinctrl-1 = <&pinctrl_enet1_sleep>; clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, <&clks IMX7D_ENET_AXI_ROOT_CLK>, <&clks IMX7D_ENET1_TIME_ROOT_CLK>, @@ -115,6 +118,18 @@ fsl,magic-packet; }; +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "disabled"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "disabled"; +}; + &gpmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpmi_nand>; @@ -125,8 +140,12 @@ &i2c1 { clock-frequency = <100000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1 &pinctrl_i2c1_int>; + pinctrl-1 = <&pinctrl_i2c1_recovery &pinctrl_i2c1_int>; + scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; codec: sgtl5000@a { @@ -227,8 +246,11 @@ &i2c4 { clock-frequency = <100000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_recovery>; + scl-gpios = <&gpio7 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio7 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; }; &lcdif { @@ -267,10 +289,6 @@ status = "okay"; }; -&snvs_pwrkey { - status = "disabled"; -}; - &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>; @@ -323,16 +341,16 @@ vmmc-supply = <®_module_3v3>; vqmmc-supply = <®_DCDC3>; non-removable; + sdhci-caps-mask = <0x80000000 0x0>; }; &iomuxc { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4>; + pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4 + &pinctrl_gpio7>; pinctrl_gpio1: gpio1-grp { fsl,pins = < - MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x74 /* SODIMM 55 */ - MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x74 /* SODIMM 63 */ MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x14 /* SODIMM 77 */ MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x14 /* SODIMM 89 */ MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x74 /* SODIMM 91 */ @@ -413,6 +431,13 @@ >; }; + pinctrl_gpio7: gpio7-grp { /* Alternatively CAN1 */ + fsl,pins = < + MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x14 /* SODIMM 55 */ + MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x14 /* SODIMM 63 */ + >; + }; + pinctrl_i2c1_int: i2c1-int-grp { /* PMIC / TOUCH */ fsl,pins = < MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x79 @@ -442,6 +467,22 @@ >; }; + pinctrl_enet1_sleep: enet1sleepgrp { + fsl,pins = < + MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4 0x0 + MX7D_PAD_ENET1_RGMII_RD0__GPIO7_IO0 0x0 + MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1 0x0 + MX7D_PAD_ENET1_RGMII_RXC__GPIO7_IO5 0x0 + + MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10 0x0 + MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6 0x0 + MX7D_PAD_ENET1_RGMII_TD1__GPIO7_IO7 0x0 + MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x0 + MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x0 + MX7D_PAD_SD2_WP__GPIO5_IO10 0x0 + >; + }; + pinctrl_ecspi3_cs: ecspi3-cs-grp { fsl,pins = < MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x14 @@ -456,10 +497,17 @@ >; }; + pinctrl_flexcan1: flexcan1-grp { + fsl,pins = < + MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX 0x79 /* SODIMM 55 */ + MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX 0x79 /* SODIMM 63 */ + >; + }; + pinctrl_flexcan2: flexcan2-grp { fsl,pins = < - MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59 - MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x59 + MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x79 /* SODIMM 188 */ + MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x79 /* SODIMM 178 */ >; }; @@ -495,6 +543,13 @@ >; }; + pinctrl_i2c4_recovery: i2c4-recoverygrp { + fsl,pins = < + MX7D_PAD_ENET1_RGMII_TD2__GPIO7_IO8 0x4000007f + MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9 0x4000007f + >; + }; + pinctrl_lcdif_dat: lcdif-dat-grp { fsl,pins = < MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 @@ -695,6 +750,13 @@ >; }; + pinctrl_i2c1_recovery: i2c1-recoverygrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x4000007f + MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x4000007f + >; + }; + pinctrl_cd_usdhc1: usdhc1-cd-grp { fsl,pins = < MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x59 /* CD */ diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts index e61567437d73..7646284e13a7 100644 --- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts @@ -44,7 +44,7 @@ <&clks IMX7D_ENET1_TIME_ROOT_CLK>; assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; assigned-clock-rates = <0>, <100000000>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <ðphy0>; fsl,magic-packet; status = "okay"; @@ -54,10 +54,12 @@ #size-cells = <0>; ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; }; ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; }; }; @@ -70,7 +72,7 @@ <&clks IMX7D_ENET2_TIME_ROOT_CLK>; assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; assigned-clock-rates = <0>, <100000000>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <ðphy1>; fsl,magic-packet; status = "okay"; diff --git a/arch/arm/boot/dts/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/imx7d-zii-rmu2.dts new file mode 100644 index 000000000000..2b8d6cc45a53 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-zii-rmu2.dts @@ -0,0 +1,357 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Device tree file for ZII's RMU2 board + * + * RMU - Remote Modem Unit + * + * Copyright (C) 2019 Zodiac Inflight Innovations + */ + +/dts-v1/; +#include <dt-bindings/thermal/thermal.h> +#include "imx7d.dtsi" + +/ { + model = "ZII RMU2 Board"; + compatible = "zii,imx7d-rmu2", "fsl,imx7d"; + + chosen { + stdout-path = &uart2; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + debug { + label = "zii:green:debug1"; + gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&cpu0 { + arm-supply = <&sw1a_reg>; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <20000000>; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii"; + phy-handle = <&fec1_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + fec1_phy: ethernet-phy@0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1_phy_reset>, + <&pinctrl_enet1_phy_interrupt>; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@8 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen2_reg: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen3_reg: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + }; + + eeprom@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + }; +}; + +&snvs_rtc { + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + status = "okay"; + + rave-sp { + compatible = "zii,rave-sp-rdu2"; + current-speed = <1000000>; + #address-cells = <1>; + #size-cells = <1>; + + watchdog { + compatible = "zii,rave-sp-watchdog"; + }; + + eeprom@a3 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa3 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + }; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + no-1-8-v; + no-sdio; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + no-1-8-v; + non-removable; + no-sdio; + no-sd; + keep-power-in-suspend; + status = "okay"; +}; + +&wdog1 { + status = "disabled"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x2 + MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x2 + MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x2 + MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x59 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3 + MX7D_PAD_SD2_WP__ENET1_MDC 0x3 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 + >; + }; + + pinctrl_enet1_phy_reset: enet1phyresetgrp { + fsl,pins = < + MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 + + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f + MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f + >; + }; + + pinctrl_leds_debug: ledsgrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x59 + >; + }; + + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x79 + MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x79 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX7D_PAD_SD2_DATA0__UART4_DCE_RX 0x79 + MX7D_PAD_SD2_DATA1__UART4_DCE_TX 0x79 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 + MX7D_PAD_SD3_CLK__SD3_CLK 0x19 + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 + MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x59 + >; + }; +}; + +&iomuxc_lpsr { + pinctrl_enet1_phy_interrupt: enet1phyinterruptgrp { + fsl,phy = < + MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x08 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/imx7d-zii-rpu2.dts index 4a78ddc7513d..39812c92bf0d 100644 --- a/arch/arm/boot/dts/imx7d-zii-rpu2.dts +++ b/arch/arm/boot/dts/imx7d-zii-rpu2.dts @@ -669,10 +669,6 @@ status = "disabled"; }; -&snvs_pwrkey { - status = "disabled"; -}; - &iomuxc { pinctrl_ecspi1: ecspi1grp { fsl,pins = < diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 42528d2812a2..9c8dd32cc035 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -147,8 +147,8 @@ <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; clock-names = "ipg", "ahb", "ptp", "enet_clk_ref", "enet_out"; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index c1a4fff5ceda..710f850e785c 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -151,7 +151,7 @@ compatible = "fsl,imx7d-tempmon"; interrupt-parent = <&gpc>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon =<&anatop>; + fsl,tempmon = <&anatop>; nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; nvmem-cell-names = "calib", "temp_grade"; @@ -1184,8 +1184,8 @@ <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; clock-names = "ipg", "ahb", "ptp", "enet_clk_ref", "enet_out"; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi index 56907bb4b329..6859a3a83750 100644 --- a/arch/arm/boot/dts/imx7ulp.dtsi +++ b/arch/arm/boot/dts/imx7ulp.dtsi @@ -101,6 +101,34 @@ reg = <0x40000000 0x800000>; ranges; + edma1: dma-controller@40080000 { + #dma-cells = <2>; + compatible = "fsl,imx7ulp-edma"; + reg = <0x40080000 0x2000>, + <0x40210000 0x1000>; + dma-channels = <32>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dma", "dmamux0"; + clocks = <&pcc2 IMX7ULP_CLK_DMA1>, + <&pcc2 IMX7ULP_CLK_DMA_MUX1>; + }; + crypto: crypto@40240000 { compatible = "fsl,sec-v4.0"; #address-cells = <1>; @@ -201,12 +229,12 @@ clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, <&scg1 IMX7ULP_CLK_NIC1_DIV>, <&pcc2 IMX7ULP_CLK_USDHC0>; - clock-names ="ipg", "ahb", "per"; + clock-names = "ipg", "ahb", "per"; assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>; assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>; bus-width = <4>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; status = "disabled"; }; @@ -217,12 +245,12 @@ clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, <&scg1 IMX7ULP_CLK_NIC1_DIV>, <&pcc2 IMX7ULP_CLK_USDHC1>; - clock-names ="ipg", "ahb", "per"; + clock-names = "ipg", "ahb", "per"; assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC1>; assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>; bus-width = <4>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts index 9466913693ac..28732249cfc0 100644 --- a/arch/arm/boot/dts/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts @@ -207,7 +207,7 @@ }; &i2c0 { - clock-frequency = <400000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; status = "okay"; @@ -236,6 +236,18 @@ }; }; +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + watchdog@38 { + compatible = "zii,rave-wdt"; + reg = <0x38>; + }; +}; + &snvsrtc { status = "disabled"; }; @@ -304,6 +316,13 @@ >; }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + VF610_PAD_PTB16__I2C1_SCL 0x37ff + VF610_PAD_PTB17__I2C1_SDA 0x37ff + >; + }; + pinctrl_leds_debug: pinctrl-leds-debug { fsl,pins = < VF610_PAD_PTD3__GPIO_82 0x31c2 diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts index d7019e89f588..dc8a5f37a1ef 100644 --- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts +++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts @@ -565,6 +565,8 @@ #gpio-cells = <2>; reg = <0x20>; gpio-controller; + interrupt-parent = <&gpio1>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; }; lm75@4e { @@ -777,7 +779,8 @@ VF610_PAD_PTB15__I2C0_SDA 0x37ff >; }; - pinctrl_i2c1: i2c1grp { + + pinctrl_i2c1: i2c1grp { fsl,pins = < VF610_PAD_PTB16__I2C1_SCL 0x37ff VF610_PAD_PTB17__I2C1_SDA 0x37ff @@ -791,13 +794,6 @@ >; }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - VF610_PAD_PTA30__I2C3_SCL 0x37ff - VF610_PAD_PTA31__I2C3_SDA 0x37ff - >; - }; - pinctrl_leds_debug: pinctrl-leds-debug { fsl,pins = < VF610_PAD_PTB26__GPIO_96 0x31c2 diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts index 9dde83ccb9d1..77e1484211e4 100644 --- a/arch/arm/boot/dts/vf610-zii-spb4.dts +++ b/arch/arm/boot/dts/vf610-zii-spb4.dts @@ -316,13 +316,6 @@ >; }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - VF610_PAD_PTB16__I2C1_SCL 0x37ff - VF610_PAD_PTB17__I2C1_SDA 0x37ff - >; - }; - pinctrl_leds_debug: pinctrl-leds-debug { fsl,pins = < VF610_PAD_PTD3__GPIO_82 0x31c2 |