summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/x86/earlyprintk.txt25
-rw-r--r--arch/x86/include/asm/pgtable-2level.h9
-rw-r--r--arch/x86/kernel/apm_32.c2
-rw-r--r--arch/x86/kernel/eisa.c10
-rw-r--r--arch/x86/kernel/topology.c4
-rw-r--r--arch/x86/platform/efi/efi_32.c3
-rw-r--r--security/Kconfig2
7 files changed, 30 insertions, 25 deletions
diff --git a/Documentation/x86/earlyprintk.txt b/Documentation/x86/earlyprintk.txt
index 688e3eeed21d..46933e06c972 100644
--- a/Documentation/x86/earlyprintk.txt
+++ b/Documentation/x86/earlyprintk.txt
@@ -35,25 +35,25 @@ and two USB cables, connected like this:
( If your system does not list a debug port capability then you probably
won't be able to use the USB debug key. )
- b.) You also need a Netchip USB debug cable/key:
+ b.) You also need a NetChip USB debug cable/key:
http://www.plxtech.com/products/NET2000/NET20DC/default.asp
- This is a small blue plastic connector with two USB connections,
+ This is a small blue plastic connector with two USB connections;
it draws power from its USB connections.
c.) You need a second client/console system with a high speed USB 2.0
port.
- d.) The Netchip device must be plugged directly into the physical
+ d.) The NetChip device must be plugged directly into the physical
debug port on the "host/target" system. You cannot use a USB hub in
between the physical debug port and the "host/target" system.
The EHCI debug controller is bound to a specific physical USB
- port and the Netchip device will only work as an early printk
+ port and the NetChip device will only work as an early printk
device in this port. The EHCI host controllers are electrically
wired such that the EHCI debug controller is hooked up to the
- first physical and there is no way to change this via software.
+ first physical port and there is no way to change this via software.
You can find the physical port through experimentation by trying
each physical port on the system and rebooting. Or you can try
and use lsusb or look at the kernel info messages emitted by the
@@ -65,9 +65,9 @@ and two USB cables, connected like this:
to the hardware vendor, because there is no reason not to wire
this port into one of the physically accessible ports.
- e.) It is also important to note, that many versions of the Netchip
+ e.) It is also important to note, that many versions of the NetChip
device require the "client/console" system to be plugged into the
- right and side of the device (with the product logo facing up and
+ right hand side of the device (with the product logo facing up and
readable left to right). The reason being is that the 5 volt
power supply is taken from only one side of the device and it
must be the side that does not get rebooted.
@@ -81,13 +81,18 @@ and two USB cables, connected like this:
CONFIG_EARLY_PRINTK_DBGP=y
And you need to add the boot command line: "earlyprintk=dbgp".
+
(If you are using Grub, append it to the 'kernel' line in
- /etc/grub.conf)
+ /etc/grub.conf. If you are using Grub2 on a BIOS firmware system,
+ append it to the 'linux' line in /boot/grub2/grub.cfg. If you are
+ using Grub2 on an EFI firmware system, append it to the 'linux'
+ or 'linuxefi' line in /boot/grub2/grub.cfg or
+ /boot/efi/EFI/<distro>/grub.cfg.)
On systems with more than one EHCI debug controller you must
specify the correct EHCI debug controller number. The ordering
comes from the PCI bus enumeration of the EHCI controllers. The
- default with no number argument is "0" the first EHCI debug
+ default with no number argument is "0" or the first EHCI debug
controller. To use the second EHCI debug controller, you would
use the command line: "earlyprintk=dbgp1"
@@ -111,7 +116,7 @@ and two USB cables, connected like this:
see the raw output.
c.) On Nvidia Southbridge based systems: the kernel will try to probe
- and find out which port has debug device connected.
+ and find out which port has a debug device connected.
3. Testing that it works fine:
diff --git a/arch/x86/include/asm/pgtable-2level.h b/arch/x86/include/asm/pgtable-2level.h
index 24c6cf5f16b7..60d0f9015317 100644
--- a/arch/x86/include/asm/pgtable-2level.h
+++ b/arch/x86/include/asm/pgtable-2level.h
@@ -19,9 +19,6 @@ static inline void native_set_pte(pte_t *ptep , pte_t pte)
static inline void native_set_pmd(pmd_t *pmdp, pmd_t pmd)
{
-#ifdef CONFIG_PAGE_TABLE_ISOLATION
- pmd.pud.p4d.pgd = pti_set_user_pgtbl(&pmdp->pud.p4d.pgd, pmd.pud.p4d.pgd);
-#endif
*pmdp = pmd;
}
@@ -61,9 +58,6 @@ static inline pte_t native_ptep_get_and_clear(pte_t *xp)
#ifdef CONFIG_SMP
static inline pmd_t native_pmdp_get_and_clear(pmd_t *xp)
{
-#ifdef CONFIG_PAGE_TABLE_ISOLATION
- pti_set_user_pgtbl(&xp->pud.p4d.pgd, __pgd(0));
-#endif
return __pmd(xchg((pmdval_t *)xp, 0));
}
#else
@@ -73,9 +67,6 @@ static inline pmd_t native_pmdp_get_and_clear(pmd_t *xp)
#ifdef CONFIG_SMP
static inline pud_t native_pudp_get_and_clear(pud_t *xp)
{
-#ifdef CONFIG_PAGE_TABLE_ISOLATION
- pti_set_user_pgtbl(&xp->p4d.pgd, __pgd(0));
-#endif
return __pud(xchg((pudval_t *)xp, 0));
}
#else
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index ec00d1ff5098..f7151cd03cb0 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -1640,6 +1640,7 @@ static int do_open(struct inode *inode, struct file *filp)
return 0;
}
+#ifdef CONFIG_PROC_FS
static int proc_apm_show(struct seq_file *m, void *v)
{
unsigned short bx;
@@ -1719,6 +1720,7 @@ static int proc_apm_show(struct seq_file *m, void *v)
units);
return 0;
}
+#endif
static int apm(void *unused)
{
diff --git a/arch/x86/kernel/eisa.c b/arch/x86/kernel/eisa.c
index f260e452e4f8..e8c8c5d78dbd 100644
--- a/arch/x86/kernel/eisa.c
+++ b/arch/x86/kernel/eisa.c
@@ -7,11 +7,17 @@
#include <linux/eisa.h>
#include <linux/io.h>
+#include <xen/xen.h>
+
static __init int eisa_bus_probe(void)
{
- void __iomem *p = ioremap(0x0FFFD9, 4);
+ void __iomem *p;
+
+ if (xen_pv_domain() && !xen_initial_domain())
+ return 0;
- if (readl(p) == 'E' + ('I'<<8) + ('S'<<16) + ('A'<<24))
+ p = ioremap(0x0FFFD9, 4);
+ if (p && readl(p) == 'E' + ('I' << 8) + ('S' << 16) + ('A' << 24))
EISA_bus = 1;
iounmap(p);
return 0;
diff --git a/arch/x86/kernel/topology.c b/arch/x86/kernel/topology.c
index 12cbe2b88c0f..738bf42b0218 100644
--- a/arch/x86/kernel/topology.c
+++ b/arch/x86/kernel/topology.c
@@ -111,8 +111,10 @@ int arch_register_cpu(int num)
/*
* Currently CPU0 is only hotpluggable on Intel platforms. Other
* vendors can add hotplug support later.
+ * Xen PV guests don't support CPU0 hotplug at all.
*/
- if (c->x86_vendor != X86_VENDOR_INTEL)
+ if (c->x86_vendor != X86_VENDOR_INTEL ||
+ boot_cpu_has(X86_FEATURE_XENPV))
cpu0_hotpluggable = 0;
/*
diff --git a/arch/x86/platform/efi/efi_32.c b/arch/x86/platform/efi/efi_32.c
index 05ca14222463..9959657127f4 100644
--- a/arch/x86/platform/efi/efi_32.c
+++ b/arch/x86/platform/efi/efi_32.c
@@ -85,10 +85,9 @@ pgd_t * __init efi_call_phys_prolog(void)
void __init efi_call_phys_epilog(pgd_t *save_pgd)
{
+ load_fixmap_gdt(0);
load_cr3(save_pgd);
__flush_tlb_all();
-
- load_fixmap_gdt(0);
}
void __init efi_runtime_update_mappings(void)
diff --git a/security/Kconfig b/security/Kconfig
index 27d8b2688f75..d9aa521b5206 100644
--- a/security/Kconfig
+++ b/security/Kconfig
@@ -57,7 +57,7 @@ config SECURITY_NETWORK
config PAGE_TABLE_ISOLATION
bool "Remove the kernel mapping in user mode"
default y
- depends on X86 && !UML
+ depends on (X86_64 || X86_PAE) && !UML
help
This feature reduces the number of hardware side channels by
ensuring that the majority of kernel addresses are not mapped