diff options
| -rw-r--r-- | arch/arm/boot/dts/am33xx.dtsi | 2 | ||||
| -rw-r--r-- | arch/arm/boot/dts/am4372.dtsi | 2 | ||||
| -rw-r--r-- | arch/arm/boot/dts/am57xx-beagle-x15.dts | 17 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/clockdomains7xx_data.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/pm34xx.c | 23 |
5 files changed, 16 insertions, 30 deletions
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 55ca9c7dcf6a..0467846b4cc3 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -860,7 +860,7 @@ ti,no-idle-on-init; reg = <0x50000000 0x2000>; interrupts = <100>; - dmas = <&edma 52>; + dmas = <&edma 52 0>; dma-names = "rxtx"; gpmc,num-cs = <7>; gpmc,num-waitpins = <2>; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 344b861a55a5..ba580a9da390 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -884,7 +884,7 @@ gpmc: gpmc@50000000 { compatible = "ti,am3352-gpmc"; ti,hwmods = "gpmc"; - dmas = <&edma 52>; + dmas = <&edma 52 0>; dma-names = "rxtx"; clocks = <&l3s_gclk>; clock-names = "fck"; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 0a5fc5d02ce2..4168eb9dd369 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -99,13 +99,6 @@ #cooling-cells = <2>; }; - extcon_usb1: extcon_usb1 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&extcon_usb1_pins>; - }; - hdmi0: connector { compatible = "hdmi-connector"; label = "hdmi"; @@ -349,12 +342,6 @@ >; }; - extcon_usb1_pins: extcon_usb1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */ - >; - }; - tpd12s015_pins: pinmux_tpd12s015_pins { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */ @@ -706,10 +693,6 @@ pinctrl-0 = <&usb1_pins>; }; -&omap_dwc3_1 { - extcon = <&extcon_usb1>; -}; - &omap_dwc3_2 { extcon = <&extcon_usb2>; }; diff --git a/arch/arm/mach-omap2/clockdomains7xx_data.c b/arch/arm/mach-omap2/clockdomains7xx_data.c index 7581e036bda6..ef9ed36e8a61 100644 --- a/arch/arm/mach-omap2/clockdomains7xx_data.c +++ b/arch/arm/mach-omap2/clockdomains7xx_data.c @@ -461,7 +461,7 @@ static struct clockdomain ipu_7xx_clkdm = { .cm_inst = DRA7XX_CM_CORE_AON_IPU_INST, .clkdm_offs = DRA7XX_CM_CORE_AON_IPU_IPU_CDOFFS, .dep_bit = DRA7XX_IPU_STATDEP_SHIFT, - .flags = CLKDM_CAN_HWSUP_SWSUP, + .flags = CLKDM_CAN_SWSUP, }; static struct clockdomain mpu1_7xx_clkdm = { diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 2dbd3785ee6f..d44e0e2f1106 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -198,7 +198,6 @@ void omap_sram_idle(void) int per_next_state = PWRDM_POWER_ON; int core_next_state = PWRDM_POWER_ON; int per_going_off; - int core_prev_state; u32 sdrc_pwr = 0; mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm); @@ -278,16 +277,20 @@ void omap_sram_idle(void) sdrc_write_reg(sdrc_pwr, SDRC_POWER); /* CORE */ - if (core_next_state < PWRDM_POWER_ON) { - core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm); - if (core_prev_state == PWRDM_POWER_OFF) { - omap3_core_restore_context(); - omap3_cm_restore_context(); - omap3_sram_restore_context(); - omap2_sms_restore_context(); - } + if (core_next_state < PWRDM_POWER_ON && + pwrdm_read_prev_pwrst(core_pwrdm) == PWRDM_POWER_OFF) { + omap3_core_restore_context(); + omap3_cm_restore_context(); + omap3_sram_restore_context(); + omap2_sms_restore_context(); + } else { + /* + * In off-mode resume path above, omap3_core_restore_context + * also handles the INTC autoidle restore done here so limit + * this to non-off mode resume paths so we don't do it twice. + */ + omap3_intc_resume_idle(); } - omap3_intc_resume_idle(); pwrdm_post_transition(NULL); |