diff options
27 files changed, 242 insertions, 272 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 8c4382e5e5f3..1086a0e8083e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -424,21 +424,6 @@ config ARCH_DOVE help Support for the Marvell Dove SoC 88AP510 -config ARCH_LPC32XX - bool "NXP LPC32XX" - select ARM_AMBA - select CLKDEV_LOOKUP - select CLKSRC_LPC32XX - select COMMON_CLK - select CPU_ARM926T - select GENERIC_CLOCKEVENTS - select GENERIC_IRQ_MULTI_HANDLER - select GPIOLIB - select SPARSE_IRQ - select USE_OF - help - Support for the NXP LPC32XX family of processors - config ARCH_PXA bool "PXA2xx/PXA3xx-based" depends on MMU @@ -686,6 +671,8 @@ source "arch/arm/mach-ixp4xx/Kconfig" source "arch/arm/mach-keystone/Kconfig" +source "arch/arm/mach-lpc32xx/Kconfig" + source "arch/arm/mach-mediatek/Kconfig" source "arch/arm/mach-meson/Kconfig" diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index 0cdc6c7974b3..09deb57db942 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig @@ -12,6 +12,7 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL_SYSCALL=y CONFIG_EMBEDDED=y CONFIG_SLAB=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_LPC32XX=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 @@ -93,6 +94,7 @@ CONFIG_SERIAL_HS_LPC32XX_CONSOLE=y # CONFIG_HW_RANDOM is not set CONFIG_I2C_CHARDEV=y CONFIG_I2C_PNX=y +CONFIG_GPIO_LPC32XX=y CONFIG_SPI=y CONFIG_SPI_PL022=y CONFIG_GPIO_SYSFS=y diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig new file mode 100644 index 000000000000..ec87c65f4536 --- /dev/null +++ b/arch/arm/mach-lpc32xx/Kconfig @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0-only + +config ARCH_LPC32XX + bool "NXP LPC32XX" + depends on ARCH_MULTI_V5 + select ARM_AMBA + select CLKSRC_LPC32XX + select CPU_ARM926T + select GPIOLIB + help + Support for the NXP LPC32XX family of processors diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c index 5b71b4fab2cd..304ea61a0716 100644 --- a/arch/arm/mach-lpc32xx/common.c +++ b/arch/arm/mach-lpc32xx/common.c @@ -8,12 +8,12 @@ */ #include <linux/init.h> +#include <linux/soc/nxp/lpc32xx-misc.h> #include <asm/mach/map.h> #include <asm/system_info.h> -#include <mach/hardware.h> -#include <mach/platform.h> +#include "lpc32xx.h" #include "common.h" /* @@ -32,7 +32,7 @@ void lpc32xx_get_uid(u32 devid[4]) */ #define LPC32XX_IRAM_BANK_SIZE SZ_128K static u32 iram_size; -u32 lpc32xx_return_iram_size(void) +u32 lpc32xx_return_iram(void __iomem **mapbase, dma_addr_t *dmaaddr) { if (iram_size == 0) { u32 savedval1, savedval2; @@ -53,10 +53,26 @@ u32 lpc32xx_return_iram_size(void) } else iram_size = LPC32XX_IRAM_BANK_SIZE * 2; } + if (dmaaddr) + *dmaaddr = LPC32XX_IRAM_BASE; + if (mapbase) + *mapbase = io_p2v(LPC32XX_IRAM_BASE); return iram_size; } -EXPORT_SYMBOL_GPL(lpc32xx_return_iram_size); +EXPORT_SYMBOL_GPL(lpc32xx_return_iram); + +void lpc32xx_set_phy_interface_mode(phy_interface_t mode) +{ + u32 tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL); + tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK; + if (mode == PHY_INTERFACE_MODE_MII) + tmp |= LPC32XX_CLKPWR_MACCTRL_USE_MII_PINS; + else + tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS; + __raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL); +} +EXPORT_SYMBOL_GPL(lpc32xx_set_phy_interface_mode); static struct map_desc lpc32xx_io_desc[] __initdata = { { diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h index 8e597ce48a73..32f0ad217807 100644 --- a/arch/arm/mach-lpc32xx/common.h +++ b/arch/arm/mach-lpc32xx/common.h @@ -23,7 +23,6 @@ extern void __init lpc32xx_serial_init(void); */ extern void lpc32xx_get_uid(u32 devid[4]); -extern u32 lpc32xx_return_iram_size(void); /* * Pointers used for sizing and copying suspend function data */ diff --git a/arch/arm/mach-lpc32xx/include/mach/board.h b/arch/arm/mach-lpc32xx/include/mach/board.h deleted file mode 100644 index 476513d970a4..000000000000 --- a/arch/arm/mach-lpc32xx/include/mach/board.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * arm/arch/mach-lpc32xx/include/mach/board.h - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2010 NXP Semiconductors - */ - -#ifndef __ASM_ARCH_BOARD_H -#define __ASM_ARCH_BOARD_H - -extern u32 lpc32xx_return_iram_size(void); - -#endif /* __ASM_ARCH_BOARD_H */ diff --git a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S deleted file mode 100644 index eec0f5f7e722..000000000000 --- a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S +++ /dev/null @@ -1,28 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * arch/arm/mach-lpc32xx/include/mach/entry-macro.S - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2010 NXP Semiconductors - */ - -#include <mach/hardware.h> -#include <mach/platform.h> - -#define LPC32XX_INTC_MASKED_STATUS_OFS 0x8 - - .macro get_irqnr_preamble, base, tmp - ldr \base, =IO_ADDRESS(LPC32XX_MIC_BASE) - .endm - -/* - * Return IRQ number in irqnr. Also return processor Z flag status in CPSR - * as set if an interrupt is pending. - */ - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, [\base, #LPC32XX_INTC_MASKED_STATUS_OFS] - clz \irqnr, \irqstat - rsb \irqnr, \irqnr, #31 - teq \irqstat, #0 - .endm diff --git a/arch/arm/mach-lpc32xx/include/mach/hardware.h b/arch/arm/mach-lpc32xx/include/mach/hardware.h deleted file mode 100644 index 4866f096ffce..000000000000 --- a/arch/arm/mach-lpc32xx/include/mach/hardware.h +++ /dev/null @@ -1,25 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * arch/arm/mach-lpc32xx/include/mach/hardware.h - * - * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com> - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -/* - * Start of virtual addresses for IO devices - */ -#define IO_BASE 0xF0000000 - -/* - * This macro relies on fact that for all HW i/o addresses bits 20-23 are 0 - */ -#define IO_ADDRESS(x) IOMEM(((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) |\ - IO_BASE) - -#define io_p2v(x) ((void __iomem *) (unsigned long) IO_ADDRESS(x)) -#define io_v2p(x) ((((x) & 0x0ff00000) << 4) | ((x) & 0x000fffff)) - -#endif diff --git a/arch/arm/mach-lpc32xx/include/mach/uncompress.h b/arch/arm/mach-lpc32xx/include/mach/uncompress.h deleted file mode 100644 index a568812a0b91..000000000000 --- a/arch/arm/mach-lpc32xx/include/mach/uncompress.h +++ /dev/null @@ -1,50 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * arch/arm/mach-lpc32xx/include/mach/uncompress.h - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2010 NXP Semiconductors - */ - -#ifndef __ASM_ARM_ARCH_UNCOMPRESS_H -#define __ASM_ARM_ARCH_UNCOMPRESS_H - -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/platform.h> - -/* - * Uncompress output is hardcoded to standard UART 5 - */ - -#define UART_FIFO_CTL_TX_RESET (1 << 2) -#define UART_STATUS_TX_MT (1 << 6) - -#define _UARTREG(x) (void __iomem *)(LPC32XX_UART5_BASE + (x)) - -#define LPC32XX_UART_DLLFIFO_O 0x00 -#define LPC32XX_UART_IIRFCR_O 0x08 -#define LPC32XX_UART_LSR_O 0x14 - -static inline void putc(int ch) -{ - /* Wait for transmit FIFO to empty */ - while ((__raw_readl(_UARTREG(LPC32XX_UART_LSR_O)) & - UART_STATUS_TX_MT) == 0) - ; - - __raw_writel((u32) ch, _UARTREG(LPC32XX_UART_DLLFIFO_O)); -} - -static inline void flush(void) -{ - __raw_writel(__raw_readl(_UARTREG(LPC32XX_UART_IIRFCR_O)) | - UART_FIFO_CTL_TX_RESET, _UARTREG(LPC32XX_UART_IIRFCR_O)); -} - -/* NULL functions; we don't presently need them */ -#define arch_decomp_setup() - -#endif diff --git a/arch/arm/mach-lpc32xx/include/mach/platform.h b/arch/arm/mach-lpc32xx/lpc32xx.h index 1c53790444fc..5eeb884a1993 100644 --- a/arch/arm/mach-lpc32xx/include/mach/platform.h +++ b/arch/arm/mach-lpc32xx/lpc32xx.h @@ -7,8 +7,8 @@ * Copyright (C) 2010 NXP Semiconductors */ -#ifndef __ASM_ARCH_PLATFORM_H -#define __ASM_ARCH_PLATFORM_H +#ifndef __ARM_LPC32XX_H +#define __ARM_LPC32XX_H #define _SBF(f, v) ((v) << (f)) #define _BIT(n) _SBF(n, 1) @@ -700,4 +700,18 @@ #define LPC32XX_USB_OTG_DEV_CLOCK_ON _BIT(1) #define LPC32XX_USB_OTG_HOST_CLOCK_ON _BIT(0) +/* + * Start of virtual addresses for IO devices + */ +#define IO_BASE 0xF0000000 + +/* + * This macro relies on fact that for all HW i/o addresses bits 20-23 are 0 + */ +#define IO_ADDRESS(x) IOMEM(((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) |\ + IO_BASE) + +#define io_p2v(x) ((void __iomem *) (unsigned long) IO_ADDRESS(x)) +#define io_v2p(x) ((((x) & 0x0ff00000) << 4) | ((x) & 0x000fffff)) + #endif diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c index 32bca351a73b..b27fa1b9f56c 100644 --- a/arch/arm/mach-lpc32xx/pm.c +++ b/arch/arm/mach-lpc32xx/pm.c @@ -70,8 +70,7 @@ #include <asm/cacheflush.h> -#include <mach/hardware.h> -#include <mach/platform.h> +#include "lpc32xx.h" #include "common.h" #define TEMP_IRAM_AREA IO_ADDRESS(LPC32XX_IRAM_BASE) diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c index 3f9b30df9f0e..3e765c4bf986 100644 --- a/arch/arm/mach-lpc32xx/serial.c +++ b/arch/arm/mach-lpc32xx/serial.c @@ -16,8 +16,7 @@ #include <linux/clk.h> #include <linux/io.h> -#include <mach/hardware.h> -#include <mach/platform.h> +#include "lpc32xx.h" #include "common.h" #define LPC32XX_SUART_FIFO_SIZE 64 @@ -60,6 +59,36 @@ static struct uartinit uartinit_data[] __initdata = { }, }; +/* LPC3250 Errata HSUART.1: Hang workaround via loopback mode on inactivity */ +void lpc32xx_loopback_set(resource_size_t mapbase, int state) +{ + int bit; + u32 tmp; + + switch (mapbase) { + case LPC32XX_HS_UART1_BASE: + bit = 0; + break; + case LPC32XX_HS_UART2_BASE: + bit = 1; + break; + case LPC32XX_HS_UART7_BASE: + bit = 6; + break; + default: + WARN(1, "lpc32xx_hs: Warning: Unknown port at %08x\n", mapbase); + return; + } + + tmp = readl(LPC32XX_UARTCTL_CLOOP); + if (state) + tmp |= (1 << bit); + else + tmp &= ~(1 << bit); + writel(tmp, LPC32XX_UARTCTL_CLOOP); +} +EXPORT_SYMBOL_GPL(lpc32xx_loopback_set); + void __init lpc32xx_serial_init(void) { u32 tmp, clkmodes = 0; diff --git a/arch/arm/mach-lpc32xx/suspend.S b/arch/arm/mach-lpc32xx/suspend.S index 374f9f07fe48..3f0a8282ef6f 100644 --- a/arch/arm/mach-lpc32xx/suspend.S +++ b/arch/arm/mach-lpc32xx/suspend.S @@ -11,8 +11,7 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <mach/platform.h> -#include <mach/hardware.h> +#include "lpc32xx.h" /* Using named register defines makes the code easier to follow */ #define WORK1_REG r0 diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 6d4bc584efc4..34c679cd564f 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -311,6 +311,13 @@ config GPIO_LPC18XX Select this option to enable GPIO driver for NXP LPC18XX/43XX devices. +config GPIO_LPC32XX + tristate "NXP LPC32XX GPIO support" + depends on OF_GPIO && (ARCH_LPC32XX || COMPILE_TEST) + help + Select this option to enable GPIO driver for + NXP LPC32XX devices. + config GPIO_LYNXPOINT tristate "Intel Lynxpoint GPIO support" depends on ACPI && X86 diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index a4e91175c708..87d659ae95eb 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -74,7 +74,7 @@ obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o obj-$(CONFIG_GPIO_LP873X) += gpio-lp873x.o obj-$(CONFIG_GPIO_LP87565) += gpio-lp87565.o obj-$(CONFIG_GPIO_LPC18XX) += gpio-lpc18xx.o -obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o +obj-$(CONFIG_GPIO_LPC32XX) += gpio-lpc32xx.o obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o obj-$(CONFIG_GPIO_MADERA) += gpio-madera.o obj-$(CONFIG_GPIO_MAX3191X) += gpio-max3191x.o diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c index 24885b3db3d5..4e626c4235c2 100644 --- a/drivers/gpio/gpio-lpc32xx.c +++ b/drivers/gpio/gpio-lpc32xx.c @@ -16,36 +16,33 @@ #include <linux/platform_device.h> #include <linux/module.h> -#include <mach/hardware.h> -#include <mach/platform.h> - -#define LPC32XX_GPIO_P3_INP_STATE _GPREG(0x000) -#define LPC32XX_GPIO_P3_OUTP_SET _GPREG(0x004) -#define LPC32XX_GPIO_P3_OUTP_CLR _GPREG(0x008) -#define LPC32XX_GPIO_P3_OUTP_STATE _GPREG(0x00C) -#define LPC32XX_GPIO_P2_DIR_SET _GPREG(0x010) -#define LPC32XX_GPIO_P2_DIR_CLR _GPREG(0x014) -#define LPC32XX_GPIO_P2_DIR_STATE _GPREG(0x018) -#define LPC32XX_GPIO_P2_INP_STATE _GPREG(0x01C) -#define LPC32XX_GPIO_P2_OUTP_SET _GPREG(0x020) -#define LPC32XX_GPIO_P2_OUTP_CLR _GPREG(0x024) -#define LPC32XX_GPIO_P2_MUX_SET _GPREG(0x028) -#define LPC32XX_GPIO_P2_MUX_CLR _GPREG(0x02C) -#define LPC32XX_GPIO_P2_MUX_STATE _GPREG(0x030) -#define LPC32XX_GPIO_P0_INP_STATE _GPREG(0x040) -#define LPC32XX_GPIO_P0_OUTP_SET _GPREG(0x044) -#define LPC32XX_GPIO_P0_OUTP_CLR _GPREG(0x048) -#define LPC32XX_GPIO_P0_OUTP_STATE _GPREG(0x04C) -#define LPC32XX_GPIO_P0_DIR_SET _GPREG(0x050) -#define LPC32XX_GPIO_P0_DIR_CLR _GPREG(0x054) -#define LPC32XX_GPIO_P0_DIR_STATE _GPREG(0x058) -#define LPC32XX_GPIO_P1_INP_STATE _GPREG(0x060) -#define LPC32XX_GPIO_P1_OUTP_SET _GPREG(0x064) -#define LPC32XX_GPIO_P1_OUTP_CLR _GPREG(0x068) -#define LPC32XX_GPIO_P1_OUTP_STATE _GPREG(0x06C) -#define LPC32XX_GPIO_P1_DIR_SET _GPREG(0x070) -#define LPC32XX_GPIO_P1_DIR_CLR _GPREG(0x074) -#define LPC32XX_GPIO_P1_DIR_STATE _GPREG(0x078) +#define LPC32XX_GPIO_P3_INP_STATE (0x000) +#define LPC32XX_GPIO_P3_OUTP_SET (0x004) +#define LPC32XX_GPIO_P3_OUTP_CLR (0x008) +#define LPC32XX_GPIO_P3_OUTP_STATE (0x00C) +#define LPC32XX_GPIO_P2_DIR_SET (0x010) +#define LPC32XX_GPIO_P2_DIR_CLR (0x014) +#define LPC32XX_GPIO_P2_DIR_STATE (0x018) +#define LPC32XX_GPIO_P2_INP_STATE (0x01C) +#define LPC32XX_GPIO_P2_OUTP_SET (0x020) +#define LPC32XX_GPIO_P2_OUTP_CLR (0x024) +#define LPC32XX_GPIO_P2_MUX_SET (0x028) +#define LPC32XX_GPIO_P2_MUX_CLR (0x02C) +#define LPC32XX_GPIO_P2_MUX_STATE (0x030) +#define LPC32XX_GPIO_P0_INP_STATE (0x040) +#define LPC32XX_GPIO_P0_OUTP_SET (0x044) +#define LPC32XX_GPIO_P0_OUTP_CLR (0x048) +#define LPC32XX_GPIO_P0_OUTP_STATE (0x04C) +#define LPC32XX_GPIO_P0_DIR_SET (0x050) +#define LPC32XX_GPIO_P0_DIR_CLR (0x054) +#define LPC32XX_GPIO_P0_DIR_STATE (0x058) +#define LPC32XX_GPIO_P1_INP_STATE (0x060) +#define LPC32XX_GPIO_P1_OUTP_SET (0x064) +#define LPC32XX_GPIO_P1_OUTP_CLR (0x068) +#define LPC32XX_GPIO_P1_OUTP_STATE (0x06C) +#define LPC32XX_GPIO_P1_DIR_SET (0x070) +#define LPC32XX_GPIO_P1_DIR_CLR (0x074) +#define LPC32XX_GPIO_P1_DIR_STATE (0x078) #define GPIO012_PIN_TO_BIT(x) (1 << (x)) #define GPIO3_PIN_TO_BIT(x) (1 << ((x) + 25)) @@ -72,12 +69,12 @@ #define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX) struct gpio_regs { - void __iomem *inp_state; - void __iomem *outp_state; - void __iomem *outp_set; - void __iomem *outp_clr; - void __iomem *dir_set; - void __iomem *dir_clr; + unsigned long inp_state; + unsigned long outp_state; + unsigned long outp_set; + unsigned long outp_clr; + unsigned long dir_set; + unsigned long dir_clr; }; /* @@ -165,16 +162,27 @@ static struct gpio_regs gpio_grp_regs_p3 = { struct lpc32xx_gpio_chip { struct gpio_chip chip; struct gpio_regs *gpio_grp; + void __iomem *reg_base; }; +static inline u32 gpreg_read(struct lpc32xx_gpio_chip *group, unsigned long offset) +{ + return __raw_readl(group->reg_base + offset); +} + +static inline void gpreg_write(struct lpc32xx_gpio_chip *group, u32 val, unsigned long offset) +{ + __raw_writel(val, group->reg_base + offset); +} + static void __set_gpio_dir_p012(struct lpc32xx_gpio_chip *group, unsigned pin, int input) { if (input) - __raw_writel(GPIO012_PIN_TO_BIT(pin), + gpreg_write(group, GPIO012_PIN_TO_BIT(pin), group->gpio_grp->dir_clr); else - __raw_writel(GPIO012_PIN_TO_BIT(pin), + gpreg_write(group, GPIO012_PIN_TO_BIT(pin), group->gpio_grp->dir_set); } @@ -184,19 +192,19 @@ static void __set_gpio_dir_p3(struct lpc32xx_gpio_chip *group, u32 u = GPIO3_PIN_TO_BIT(pin); if (input) - __raw_writel(u, group->gpio_grp->dir_clr); + gpreg_write(group, u, group->gpio_grp->dir_clr); else - __raw_writel(u, group->gpio_grp->dir_set); + gpreg_write(group, u, group->gpio_grp->dir_set); } static void __set_gpio_level_p012(struct lpc32xx_gpio_chip *group, unsigned pin, int high) { if (high) - __raw_writel(GPIO012_PIN_TO_BIT(pin), + gpreg_write(group, GPIO012_PIN_TO_BIT(pin), group->gpio_grp->outp_set); else - __raw_writel(GPIO012_PIN_TO_BIT(pin), + gpreg_write(group, GPIO012_PIN_TO_BIT(pin), group->gpio_grp->outp_clr); } @@ -206,31 +214,31 @@ static void __set_gpio_level_p3(struct lpc32xx_gpio_chip *group, u32 u = GPIO3_PIN_TO_BIT(pin); if (high) - __raw_writel(u, group->gpio_grp->outp_set); + gpreg_write(group, u, group->gpio_grp->outp_set); else - __raw_writel(u, group->gpio_grp->outp_clr); + gpreg_write(group, u, group->gpio_grp->outp_clr); } static void __set_gpo_level_p3(struct lpc32xx_gpio_chip *group, unsigned pin, int high) { if (high) - __raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_set); + gpreg_write(group, GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_set); else - __raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_clr); + gpreg_write(group, GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_clr); } static int __get_gpio_state_p012(struct lpc32xx_gpio_chip *group, unsigned pin) { - return GPIO012_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state), + return GPIO012_PIN_IN_SEL(gpreg_read(group, group->gpio_grp->inp_state), pin); } static int __get_gpio_state_p3(struct lpc32xx_gpio_chip *group, unsigned pin) { - int state = __raw_readl(group->gpio_grp->inp_state); + int state = gpreg_read(group, group->gpio_grp->inp_state); /* * P3 GPIO pin input mapping is not contiguous, GPIOP3-0..4 is mapped @@ -242,13 +250,13 @@ static int __get_gpio_state_p3(struct lpc32xx_gpio_chip *group, static int __get_gpi_state_p3(struct lpc32xx_gpio_chip *group, unsigned pin) { - return GPI3_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state), pin); + return GPI3_PIN_IN_SEL(gpreg_read(group, group->gpio_grp->inp_state), pin); } static int __get_gpo_state_p3(struct lpc32xx_gpio_chip *group, unsigned pin) { - return GPO3_PIN_IN_SEL(__raw_readl(group->gpio_grp->outp_state), pin); + return GPO3_PIN_IN_SEL(gpreg_read(group, group->gpio_grp->outp_state), pin); } /* @@ -497,12 +505,18 @@ static int lpc32xx_of_xlate(struct gpio_chip *gc, static int lpc32xx_gpio_probe(struct platform_device *pdev) { int i; + void __iomem *reg_base; + + reg_base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(reg_base)) + return PTR_ERR(reg_base); for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++) { if (pdev->dev.of_node) { lpc32xx_gpiochip[i].chip.of_xlate = lpc32xx_of_xlate; lpc32xx_gpiochip[i].chip.of_gpio_n_cells = 3; lpc32xx_gpiochip[i].chip.of_node = pdev->dev.of_node; + lpc32xx_gpiochip[i].reg_base = reg_base; } devm_gpiochip_add_data(&pdev->dev, &lpc32xx_gpiochip[i].chip, &lpc32xx_gpiochip[i]); @@ -527,3 +541,7 @@ static struct platform_driver lpc32xx_gpio_driver = { }; module_platform_driver(lpc32xx_gpio_driver); + +MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("GPIO driver for LPC32xx SoC"); diff --git a/drivers/net/ethernet/nxp/Kconfig b/drivers/net/ethernet/nxp/Kconfig index 261f107e2be0..418afb84c84b 100644 --- a/drivers/net/ethernet/nxp/Kconfig +++ b/drivers/net/ethernet/nxp/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config LPC_ENET tristate "NXP ethernet MAC on LPC devices" - depends on ARCH_LPC32XX + depends on ARCH_LPC32XX || COMPILE_TEST select PHYLIB help Say Y or M here if you want to use the NXP ethernet MAC included on diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c index f7e11f1b0426..141571e2ec11 100644 --- a/drivers/net/ethernet/nxp/lpc_eth.c +++ b/drivers/net/ethernet/nxp/lpc_eth.c @@ -14,14 +14,12 @@ #include <linux/crc32.h> #include <linux/etherdevice.h> #include <linux/module.h> +#include <linux/of.h> #include <linux/of_net.h> #include <linux/phy.h> #include <linux/platform_device.h> #include <linux/spinlock.h> - -#include <mach/board.h> -#include <mach/hardware.h> -#include <mach/platform.h> +#include <linux/soc/nxp/lpc32xx-misc.h> #define MODNAME "lpc-eth" #define DRV_VERSION "1.00" @@ -1237,16 +1235,9 @@ static int lpc_eth_drv_probe(struct platform_device *pdev) dma_addr_t dma_handle; struct resource *res; int irq, ret; - u32 tmp; /* Setup network interface for RMII or MII mode */ - tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL); - tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK; - if (lpc_phy_interface_mode(dev) == PHY_INTERFACE_MODE_MII) - tmp |= LPC32XX_CLKPWR_MACCTRL_USE_MII_PINS; - else - tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS; - __raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL); + lpc32xx_set_phy_interface_mode(lpc_phy_interface_mode(dev)); /* Get platform resources */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1311,19 +1302,18 @@ static int lpc_eth_drv_probe(struct platform_device *pdev) /* Get size of DMA buffers/descriptors region */ pldat->dma_buff_size = (ENET_TX_DESC + ENET_RX_DESC) * (ENET_MAXF_SIZE + sizeof(struct txrx_desc_t) + sizeof(struct rx_status_t)); - pldat->dma_buff_base_v = 0; if (use_iram_for_net(dev)) { - dma_handle = LPC32XX_IRAM_BASE; - if (pldat->dma_buff_size <= lpc32xx_return_iram_size()) - pldat->dma_buff_base_v = - io_p2v(LPC32XX_IRAM_BASE); - else + if (pldat->dma_buff_size > + lpc32xx_return_iram(&pldat->dma_buff_base_v, &dma_handle)) { + pldat->dma_buff_base_v = NULL; + pldat->dma_buff_size = 0; netdev_err(ndev, "IRAM not big enough for net buffers, using SDRAM instead.\n"); + } } - if (pldat->dma_buff_base_v == 0) { + if (pldat->dma_buff_base_v == NULL) { ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32)); if (ret) goto err_out_free_irq; @@ -1344,13 +1334,14 @@ static int lpc_eth_drv_probe(struct platform_device *pdev) pldat->dma_buff_base_p = dma_handle; netdev_dbg(ndev, "IO address space :%pR\n", res); - netdev_dbg(ndev, "IO address size :%d\n", resource_size(res)); + netdev_dbg(ndev, "IO address size :%zd\n", + (size_t)resource_size(res)); netdev_dbg(ndev, "IO address (mapped) :0x%p\n", pldat->net_base); netdev_dbg(ndev, "IRQ number :%d\n", ndev->irq); - netdev_dbg(ndev, "DMA buffer size :%d\n", pldat->dma_buff_size); - netdev_dbg(ndev, "DMA buffer P address :0x%08x\n", - pldat->dma_buff_base_p); + netdev_dbg(ndev, "DMA buffer size :%zd\n", pldat->dma_buff_size); + netdev_dbg(ndev, "DMA buffer P address :%pad\n", + &pldat->dma_buff_base_p); netdev_dbg(ndev, "DMA buffer V address :0x%p\n", pldat->dma_buff_base_v); @@ -1397,8 +1388,8 @@ static int lpc_eth_drv_probe(struct platform_device *pdev) if (ret) goto err_out_unregister_netdev; - netdev_info(ndev, "LPC mac at 0x%08x irq %d\n", - res->start, ndev->irq); + netdev_info(ndev, "LPC mac at 0x%08lx irq %d\n", + (unsigned long)res->start, ndev->irq); device_init_wakeup(dev, 1); device_set_wakeup_enable(dev, 0); @@ -1409,7 +1400,7 @@ err_out_unregister_netdev: unregister_netdev(ndev); err_out_dma_unmap: if (!use_iram_for_net(dev) || - pldat->dma_buff_size > lpc32xx_return_iram_size()) + pldat->dma_buff_size > lpc32xx_return_iram(NULL, NULL)) dma_free_coherent(dev, pldat->dma_buff_size, pldat->dma_buff_base_v, pldat->dma_buff_base_p); @@ -1436,7 +1427,7 @@ static int lpc_eth_drv_remove(struct platform_device *pdev) unregister_netdev(ndev); if (!use_iram_for_net(&pldat->pdev->dev) || - pldat->dma_buff_size > lpc32xx_return_iram_size()) + pldat->dma_buff_size > lpc32xx_return_iram(NULL, NULL)) dma_free_coherent(&pldat->pdev->dev, pldat->dma_buff_size, pldat->dma_buff_base_v, pldat->dma_buff_base_p); diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 3083dbae35f7..518aac902e4b 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -739,7 +739,8 @@ config SERIAL_PNX8XXX_CONSOLE config SERIAL_HS_LPC32XX tristate "LPC32XX high speed serial port support" - depends on ARCH_LPC32XX && OF + depends on ARCH_LPC32XX || COMPILE_TEST + depends on OF select SERIAL_CORE help Support for the LPC32XX high speed serial ports (up to 900kbps). diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c index f4e27d0ad947..d3843f722182 100644 --- a/drivers/tty/serial/lpc32xx_hs.c +++ b/drivers/tty/serial/lpc32xx_hs.c @@ -25,8 +25,8 @@ #include <linux/irq.h> #include <linux/gpio.h> #include <linux/of.h> -#include <mach/platform.h> -#include <mach/hardware.h> +#include <linux/sizes.h> +#include <linux/soc/nxp/lpc32xx-misc.h> /* * High Speed UART register offsets @@ -81,6 +81,8 @@ #define LPC32XX_HSU_TX_TL8B (0x2 << 0) #define LPC32XX_HSU_TX_TL16B (0x3 << 0) +#define LPC32XX_MAIN_OSC_FREQ 13000000 + #define MODNAME "lpc32xx_hsuart" struct lpc32xx_hsuart_port { @@ -151,8 +153,6 @@ static void lpc32xx_hsuart_console_write(struct console *co, const char *s, local_irq_restore(flags); } -static void lpc32xx_loopback_set(resource_size_t mapbase, int state); - static int __init lpc32xx_hsuart_console_setup(struct console *co, char *options) { @@ -439,35 +439,6 @@ static void serial_lpc32xx_break_ctl(struct uart_port *port, spin_unlock_irqrestore(&port->lock, flags); } -/* LPC3250 Errata HSUART.1: Hang workaround via loopback mode on inactivity */ -static void lpc32xx_loopback_set(resource_size_t mapbase, int state) -{ - int bit; - u32 tmp; - - switch (mapbase) { - case LPC32XX_HS_UART1_BASE: - bit = 0; - break; - case LPC32XX_HS_UART2_BASE: - bit = 1; - break; - case LPC32XX_HS_UART7_BASE: - bit = 6; - break; - default: - WARN(1, "lpc32xx_hs: Warning: Unknown port at %08x\n", mapbase); - return; - } - - tmp = readl(LPC32XX_UARTCTL_CLOOP); - if (state) - tmp |= (1 << bit); - else - tmp &= ~(1 << bit); - writel(tmp, LPC32XX_UARTCTL_CLOOP); -} - /* port->lock is not held. */ static int serial_lpc32xx_startup(struct uart_port *port) { diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index ef0259a950ba..d354036ff6c8 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -45,7 +45,8 @@ config USB_AT91 config USB_LPC32XX tristate "LPC32XX USB Peripheral Controller" - depends on ARCH_LPC32XX && I2C + depends on ARCH_LPC32XX || COMPILE_TEST + depends on I2C select USB_ISP1301 help This option selects the USB device controller in the LPC32xx SoC. diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c index 5f1b14f3e5a0..defe04d52e6d 100644 --- a/drivers/usb/gadget/udc/lpc32xx_udc.c +++ b/drivers/usb/gadget/udc/lpc32xx_udc.c @@ -24,6 +24,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/prefetch.h> #include <linux/proc_fs.h> #include <linux/slab.h> #include <linux/usb/ch9.h> @@ -35,8 +36,6 @@ #include <linux/seq_file.h> #endif -#include <mach/hardware.h> - /* * USB device configuration structure */ diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 40b5de597112..73d233d3bf4d 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -441,7 +441,8 @@ config USB_OHCI_HCD_S3C2410 config USB_OHCI_HCD_LPC32XX tristate "Support for LPC on-chip OHCI USB controller" - depends on USB_OHCI_HCD && ARCH_LPC32XX + depends on USB_OHCI_HCD + depends on ARCH_LPC32XX || COMPILE_TEST depends on USB_ISP1301 default y ---help--- diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index f5f532601092..c561881d0e79 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -29,10 +29,7 @@ #include "ohci.h" -#include <mach/hardware.h> - #define USB_CONFIG_BASE 0x31020000 -#define USB_OTG_STAT_CONTROL IO_ADDRESS(USB_CONFIG_BASE + 0x110) /* USB_OTG_STAT_CONTROL bit defines */ #define TRANSPARENT_I2C_EN (1 << 7) @@ -122,19 +119,33 @@ static inline void isp1301_vbus_off(void) static void ohci_nxp_start_hc(void) { - unsigned long tmp = __raw_readl(USB_OTG_STAT_CONTROL) | HOST_EN; + void __iomem *usb_otg_stat_control = ioremap(USB_CONFIG_BASE + 0x110, 4); + unsigned long tmp; + + if (WARN_ON(!usb_otg_stat_control)) + return; + + tmp = __raw_readl(usb_otg_stat_control) | HOST_EN; - __raw_writel(tmp, USB_OTG_STAT_CONTROL); + __raw_writel(tmp, usb_otg_stat_control); isp1301_vbus_on(); + + iounmap(usb_otg_stat_control); } static void ohci_nxp_stop_hc(void) { + void __iomem *usb_otg_stat_control = ioremap(USB_CONFIG_BASE + 0x110, 4); unsigned long tmp; + if (WARN_ON(!usb_otg_stat_control)) + return; + isp1301_vbus_off(); - tmp = __raw_readl(USB_OTG_STAT_CONTROL) & ~HOST_EN; - __raw_writel(tmp, USB_OTG_STAT_CONTROL); + tmp = __raw_readl(usb_otg_stat_control) & ~HOST_EN; + __raw_writel(tmp, usb_otg_stat_control); + + iounmap(usb_otg_stat_control); } static int ohci_hcd_nxp_probe(struct platform_device *pdev) diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 8188963a405b..a45f9e3e442b 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -551,7 +551,7 @@ config OMAP_WATCHDOG config PNX4008_WATCHDOG tristate "LPC32XX Watchdog" - depends on ARCH_LPC32XX + depends on ARCH_LPC32XX || COMPILE_TEST select WATCHDOG_CORE help Say Y here if to include support for the watchdog timer diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c index 7b446b696f2b..e0ea133c1690 100644 --- a/drivers/watchdog/pnx4008_wdt.c +++ b/drivers/watchdog/pnx4008_wdt.c @@ -30,7 +30,6 @@ #include <linux/of.h> #include <linux/delay.h> #include <linux/reboot.h> -#include <mach/hardware.h> /* WatchDog Timer - Chapter 23 Page 207 */ diff --git a/include/linux/soc/nxp/lpc32xx-misc.h b/include/linux/soc/nxp/lpc32xx-misc.h new file mode 100644 index 000000000000..699c6f1e3aab --- /dev/null +++ b/include/linux/soc/nxp/lpc32xx-misc.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors + */ + +#ifndef __SOC_LPC32XX_MISC_H +#define __SOC_LPC32XX_MISC_H + +#include <linux/types.h> +#include <linux/phy.h> + +#ifdef CONFIG_ARCH_LPC32XX +extern u32 lpc32xx_return_iram(void __iomem **mapbase, dma_addr_t *dmaaddr); +extern void lpc32xx_set_phy_interface_mode(phy_interface_t mode); +extern void lpc32xx_loopback_set(resource_size_t mapbase, int state); +#else +static inline u32 lpc32xx_return_iram(void __iomem **mapbase, dma_addr_t *dmaaddr) +{ + *mapbase = NULL; + *dmaaddr = 0; + return 0; +} +static inline void lpc32xx_set_phy_interface_mode(phy_interface_t mode) +{ +} +static inline void lpc32xx_loopback_set(resource_size_t mapbase, int state) +{ +} +#endif + +#endif /* __SOC_LPC32XX_MISC_H */ |