diff options
-rw-r--r-- | arch/arm/boot/dts/Makefile | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/arm-realview-pba8.dts | 178 | ||||
-rw-r--r-- | arch/arm/boot/dts/arm-realview-pbx-a9.dts | 229 | ||||
-rw-r--r-- | arch/arm/boot/dts/arm-realview-pbx.dtsi | 542 |
4 files changed, 952 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index ea508fdc1fcc..e18858d30d4a 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -556,7 +556,9 @@ dtb-$(CONFIG_ARCH_REALVIEW) += \ arm-realview-eb.dtb \ arm-realview-eb-11mp.dtb \ arm-realview-eb-11mp-revb.dtb \ - arm-realview-eb-a9mp.dtb + arm-realview-eb-a9mp.dtb \ + arm-realview-pba8.dtb \ + arm-realview-pbx-a9.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3036-evb.dtb \ rk3036-kylin.dtb \ diff --git a/arch/arm/boot/dts/arm-realview-pba8.dts b/arch/arm/boot/dts/arm-realview-pba8.dts new file mode 100644 index 000000000000..d3238c252b59 --- /dev/null +++ b/arch/arm/boot/dts/arm-realview-pba8.dts @@ -0,0 +1,178 @@ +/* + * Copyright 2016 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/dts-v1/; +#include "arm-realview-pbx.dtsi" + +/ { + model = "ARM RealView Platform Baseboard for Cortex-A8"; + compatible = "arm,realview-pba8"; + arm,hbi = <0x178>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "arm,realview-smp"; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a8"; + reg = <0>; + }; + }; + + pmu: pmu@0 { + compatible = "arm,cortex-a8-pmu"; + interrupt-parent = <&intc>; + interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>; + }; + + /* Primary GIC PL390 interrupt controller in the test chip */ + intc: interrupt-controller@1e000000 { + compatible = "arm,pl390"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x1e001000 0x1000>, + <0x1e000000 0x100>; + }; +}; + +ðernet { + interrupt-parent = <&intc>; + interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>; +}; + +&usb { + interrupt-parent = <&intc>; + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; +}; + +&soc { + compatible = "arm,realview-pba8-soc", "simple-bus"; +}; + +&syscon { + compatible = "arm,realview-pba8-syscon", "syscon", "simple-mfd"; +}; + +&serial0 { + interrupt-parent = <&intc>; + interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial1 { + interrupt-parent = <&intc>; + interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial2 { + interrupt-parent = <&intc>; + interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial3 { + interrupt-parent = <&intc>; + interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; +}; + +&ssp { + interrupt-parent = <&intc>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; +}; + +&wdog0 { + interrupt-parent = <&intc>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>; +}; + +&wdog1 { + interrupt-parent = <&intc>; + interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer01 { + interrupt-parent = <&intc>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer23 { + interrupt-parent = <&intc>; + interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio0 { + interrupt-parent = <&intc>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio1 { + interrupt-parent = <&intc>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio2 { + interrupt-parent = <&intc>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; +}; + +&rtc { + interrupt-parent = <&intc>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer45 { + interrupt-parent = <&intc>; + interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer67 { + interrupt-parent = <&intc>; + interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; +}; + +&aaci { + interrupt-parent = <&intc>; + interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; +}; + +&mmc { + interrupt-parent = <&intc>; + interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>, + <0 18 IRQ_TYPE_LEVEL_HIGH>; +}; + +&kmi0 { + interrupt-parent = <&intc>; + interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>; +}; + +&kmi1 { + interrupt-parent = <&intc>; + interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; +}; + +&clcd { + interrupt-parent = <&intc>; + interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/arch/arm/boot/dts/arm-realview-pbx-a9.dts b/arch/arm/boot/dts/arm-realview-pbx-a9.dts new file mode 100644 index 000000000000..db808f92dd79 --- /dev/null +++ b/arch/arm/boot/dts/arm-realview-pbx-a9.dts @@ -0,0 +1,229 @@ +/* + * Copyright 2016 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +/dts-v1/; +#include "arm-realview-pbx.dtsi" + +/ { + /* + * This is the RealView Platform Baseboard Explore for Cortex-A9 + * (HBI0182 + HBI0183) as described in ARM DUI 0440B + */ + model = "ARM RealView Platform Baseboard Explore for Cortex-A9"; + arm,hbi = <0x182>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "arm,realview-smp"; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + }; + }; + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; + + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0x1f002000 0x1000>; + cache-unified; + cache-level = <2>; + /* + * Override default cache size, sets and + * associativity as these may be erroneously set + * up by boot loader(s). + */ + cache-size = <1048576>; // 1MB + cache-sets = <4096>; + cache-line-size = <32>; + arm,parity-disable; + arm,tag-latency = <1>; + arm,data-latency = <1 1>; + arm,dirty-latency = <1>; + }; + + scu: scu@1f000000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x1f000000 0x100>; + }; + + twd_timer: timer@1f000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x1f000600 0x20>; + interrupt-parent = <&intc>; + interrupts = <1 13 0xf04>; + }; + + twd_wdog: watchdog@1f000620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0x1f000620 0x20>; + interrupt-parent = <&intc>; + interrupts = <1 14 0xf04>; + }; + + pmu: pmu@0 { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&intc>; + interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>, + <0 45 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CPU0>, <&CPU1>; + }; + + /* Primary GIC PL390 interrupt controller in the test chip */ + intc: interrupt-controller@1f000000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0x1f001000 0x1000>, + <0x1f000100 0x100>; + }; +}; + +ðernet { + interrupt-parent = <&intc>; + interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>; +}; + +&usb { + interrupt-parent = <&intc>; + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial0 { + interrupt-parent = <&intc>; + interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial1 { + interrupt-parent = <&intc>; + interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial2 { + interrupt-parent = <&intc>; + interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; +}; + +&serial3 { + interrupt-parent = <&intc>; + interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; +}; + +&ssp { + interrupt-parent = <&intc>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; +}; + +&wdog0 { + interrupt-parent = <&intc>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>; +}; + +&wdog1 { + interrupt-parent = <&intc>; + interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer01 { + interrupt-parent = <&intc>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer23 { + interrupt-parent = <&intc>; + interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio0 { + interrupt-parent = <&intc>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio1 { + interrupt-parent = <&intc>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio2 { + interrupt-parent = <&intc>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; +}; + +&rtc { + interrupt-parent = <&intc>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer45 { + interrupt-parent = <&intc>; + interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; +}; + +&timer67 { + interrupt-parent = <&intc>; + interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; +}; + +&aaci { + interrupt-parent = <&intc>; + interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; +}; + +&mmc { + interrupt-parent = <&intc>; + interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>, + <0 18 IRQ_TYPE_LEVEL_HIGH>; +}; + +&kmi0 { + interrupt-parent = <&intc>; + interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>; +}; + +&kmi1 { + interrupt-parent = <&intc>; + interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; +}; + +&clcd { + interrupt-parent = <&intc>; + interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi new file mode 100644 index 000000000000..aeb49c4bd773 --- /dev/null +++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi @@ -0,0 +1,542 @@ +/* + * Copyright 2016 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include "skeleton.dtsi" + +/ { + compatible = "arm,realview-pbx"; + + chosen { }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + i2c0 = &i2c; + }; + + memory { + /* 128 MiB memory @ 0x0 */ + reg = <0x00000000 0x08000000>; + }; + + /* The voltage to the MMC card is hardwired at 3.3V */ + vmmc: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + veth: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "veth"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + xtal24mhz: xtal24mhz@24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + refclk32khz: refclk32khz { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + timclk: timclk@1M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <24>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + mclk: mclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + kmiclk: kmiclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + sspclk: sspclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + uartclk: uartclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + wdogclk: wdogclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + /* FIXME: this actually hangs off the PLL clocks */ + pclk: pclk@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + flash0@40000000 { + /* 2 * 32MiB NOR Flash memory */ + compatible = "arm,versatile-flash", "cfi-flash"; + reg = <0x40000000 0x04000000>; + bank-width = <4>; + }; + + flash1@44000000 { + /* 2 * 32MiB NOR Flash memory */ + compatible = "arm,versatile-flash", "cfi-flash"; + reg = <0x44000000 0x04000000>; + bank-width = <4>; + }; + + /* SMSC 9118 ethernet with PHY and EEPROM */ + ethernet: ethernet@4e000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <0x4e000000 0x10000>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vdd33a-supply = <&veth>; + vddvario-supply = <&veth>; + }; + + usb: usb@4f000000 { + compatible = "nxp,usb-isp1761"; + reg = <0x4f000000 0x20000>; + port1-otg; + }; + + soc: soc@0 { + compatible = "arm,realview-pbx-soc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + regmap = <&syscon>; + ranges; + + syscon: syscon@10000000 { + compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd"; + reg = <0x10000000 0x1000>; + + led@08.0 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x01>; + label = "versatile:0"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + led@08.1 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x02>; + label = "versatile:1"; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + led@08.2 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x04>; + label = "versatile:2"; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + led@08.3 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x08>; + label = "versatile:3"; + default-state = "off"; + }; + led@08.4 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x10>; + label = "versatile:4"; + default-state = "off"; + }; + led@08.5 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x20>; + label = "versatile:5"; + default-state = "off"; + }; + led@08.6 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x40>; + label = "versatile:6"; + default-state = "off"; + }; + led@08.7 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x80>; + label = "versatile:7"; + default-state = "off"; + }; + oscclk0: osc0@0c { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x0C>; + clocks = <&xtal24mhz>; + }; + oscclk1: osc1@10 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x10>; + clocks = <&xtal24mhz>; + }; + oscclk2: osc2@14 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x14>; + clocks = <&xtal24mhz>; + }; + oscclk3: osc3@18 { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x18>; + clocks = <&xtal24mhz>; + }; + oscclk4: osc4@1c { + compatible = "arm,syscon-icst307"; + #clock-cells = <0>; + lock-offset = <0x20>; + vco-offset = <0x1c>; + clocks = <&xtal24mhz>; + }; + }; + + sp810_syscon0: sysctl@10001000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x10001000 0x1000>; + clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclk0", + "timerclk1", + "timerclk2", + "timerclk3"; + assigned-clocks = <&sp810_syscon0 0>, + <&sp810_syscon0 1>, + <&sp810_syscon0 2>, + <&sp810_syscon0 3>; + assigned-clock-parents = <&timclk>, + <&timclk>, + <&timclk>, + <&timclk>; + }; + + i2c: i2c@10002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "arm,versatile-i2c"; + reg = <0x10002000 0x1000>; + + rtc@68 { + compatible = "dallas,ds1338"; + reg = <0x68>; + }; + }; + + serial0: serial@10009000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x10009000 0x1000>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + serial1: serial@1000a000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1000a000 0x1000>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + serial2: serial@1000b000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1000b000 0x1000>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + ssp: ssp@1000d000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x1000d000 0x1000>; + clocks = <&sspclk>, <&pclk>; + clock-names = "SSPCLK", "apb_pclk"; + }; + + wdog0: watchdog@1000f000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x1000f000 0x1000>; + clocks = <&wdogclk>, <&pclk>; + clock-names = "wdogclk", "apb_pclk"; + status = "disabled"; + }; + + wdog1: watchdog@10010000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x10010000 0x1000>; + clocks = <&wdogclk>, <&pclk>; + clock-names = "wdogclk", "apb_pclk"; + status = "disabled"; + }; + + timer01: timer@10011000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10011000 0x1000>; + clocks = <&sp810_syscon0 0>, + <&sp810_syscon0 1>, + <&pclk>; + clock-names = "timerclk0", + "timerclk1", + "apb_pclk"; + }; + + timer23: timer@10012000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10012000 0x1000>; + clocks = <&sp810_syscon0 2>, + <&sp810_syscon0 3>, + <&pclk>; + clock-names = "timerclk2", + "timerclk3", + "apb_pclk"; + }; + + gpio0: gpio@10013000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x10013000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio1: gpio@10014000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x10014000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio2: gpio@10015000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x10015000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + /* DVI serial bus control is at 10016000 */ + + rtc: rtc@10017000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x10017000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + timer45: timer@10018000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10018000 0x1000>; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timerclk4", "timerclk5", "apb_pclk"; + }; + + timer67: timer@10019000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x10019000 0x1000>; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timerclk6", "timerclk7", "apb_pclk"; + }; + + sp810_syscon1: sysctl@1001a000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x1001a000 0x1000>; + clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclk4", + "timerclk5", + "timerclk6", + "timerclk7"; + assigned-clocks = <&sp810_syscon1 0>, + <&sp810_syscon1 1>, + <&sp810_syscon1 2>, + <&sp810_syscon1 3>; + assigned-clock-parents = <&timclk>, + <&timclk>, + <&timclk>, + <&timclk>; + }; + }; + + + /* These peripherals are inside the FPGA */ + fpga { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + aaci: aaci@10004000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x10004000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + mmc: mmcsd@10005000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x10005000 0x1000>; + + /* Due to frequent FIFO overruns, use just 500 kHz */ + max-frequency = <500000>; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + clocks = <&mclk>, <&pclk>; + clock-names = "mclk", "apb_pclk"; + vmmc-supply = <&vmmc>; + cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + }; + + kmi0: kmi@10006000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x10006000 0x1000>; + clocks = <&kmiclk>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + kmi1: kmi@10007000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x10007000 0x1000>; + clocks = <&kmiclk>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + serial3: serial@1000c000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1000c000 0x1000>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + }; + + /* These peripherals are inside the NEC ISSP */ + issp { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + clcd: clcd@10020000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x10020000 0x1000>; + interrupt-names = "combined"; + clocks = <&oscclk4>, <&pclk>; + clock-names = "clcdclk", "apb_pclk"; + + port { + clcd_pads: endpoint { + remote-endpoint = <&clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; + + panel { + compatible = "panel-dpi"; + + port { + clcd_panel: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + + /* Standard 640x480 VGA timings */ + panel-timing { + clock-frequency = <25175000>; + hactive = <640>; + hback-porch = <48>; + hfront-porch = <16>; + hsync-len = <96>; + vactive = <480>; + vback-porch = <33>; + vfront-porch = <10>; + vsync-len = <2>; + }; + }; + }; + }; +}; + |