diff options
| -rw-r--r-- | Documentation/devicetree/bindings/display/ssd1307fb.txt | 1 | ||||
| -rw-r--r-- | drivers/video/fbdev/ssd1307fb.c | 20 |
2 files changed, 20 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/display/ssd1307fb.txt b/Documentation/devicetree/bindings/display/ssd1307fb.txt index 6617df68d8b8..209d931ef16c 100644 --- a/Documentation/devicetree/bindings/display/ssd1307fb.txt +++ b/Documentation/devicetree/bindings/display/ssd1307fb.txt @@ -16,6 +16,7 @@ Required properties: Optional properties: - reset-gpios: The GPIO used to reset the OLED display, if available. See Documentation/devicetree/bindings/gpio/gpio.txt for details. + - vbat-supply: The supply for VBAT - solomon,segment-no-remap: Display needs normal (non-inverted) data column to segment mapping - solomon,com-seq: Display uses sequential COM pin configuration diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c index 89372af7bc5b..616a6a3fabf9 100644 --- a/drivers/video/fbdev/ssd1307fb.c +++ b/drivers/video/fbdev/ssd1307fb.c @@ -16,6 +16,7 @@ #include <linux/of_gpio.h> #include <linux/pwm.h> #include <linux/uaccess.h> +#include <linux/regulator/consumer.h> #define SSD1307FB_DATA 0x40 #define SSD1307FB_COMMAND 0x80 @@ -74,6 +75,7 @@ struct ssd1307fb_par { struct pwm_device *pwm; u32 pwm_period; struct gpio_desc *reset; + struct regulator *vbat_reg; u32 seg_remap; u32 vcomh; u32 width; @@ -574,6 +576,14 @@ static int ssd1307fb_probe(struct i2c_client *client, goto fb_alloc_error; } + par->vbat_reg = devm_regulator_get_optional(&client->dev, "vbat"); + if (IS_ERR(par->vbat_reg)) { + dev_err(&client->dev, "failed to get VBAT regulator: %ld\n", + PTR_ERR(par->vbat_reg)); + ret = PTR_ERR(par->vbat_reg); + goto fb_alloc_error; + } + if (of_property_read_u32(node, "solomon,width", &par->width)) par->width = 96; @@ -658,9 +668,15 @@ static int ssd1307fb_probe(struct i2c_client *client, udelay(4); } + ret = regulator_enable(par->vbat_reg); + if (ret) { + dev_err(&client->dev, "failed to enable VBAT: %d\n", ret); + goto reset_oled_error; + } + ret = ssd1307fb_init(par); if (ret) - goto reset_oled_error; + goto regulator_enable_error; ret = register_framebuffer(info); if (ret) { @@ -693,6 +709,8 @@ panel_init_error: pwm_disable(par->pwm); pwm_put(par->pwm); }; +regulator_enable_error: + regulator_disable(par->vbat_reg); reset_oled_error: fb_deferred_io_cleanup(info); fb_alloc_error: |