diff options
33 files changed, 770 insertions, 321 deletions
diff --git a/Documentation/devicetree/bindings/input/input-reset.txt b/Documentation/devicetree/bindings/input/input-reset.txt new file mode 100644 index 000000000000..2bb2626fdb78 --- /dev/null +++ b/Documentation/devicetree/bindings/input/input-reset.txt @@ -0,0 +1,33 @@ +Input: sysrq reset sequence + +A simple binding to represent a set of keys as described in +include/uapi/linux/input.h. This is to communicate a sequence of keys to the +sysrq driver. Upon holding the keys for a specified amount of time (if +specified) the system is sync'ed and reset. + +Key sequences are global to the system but all the keys in a set must be coming +from the same input device. + +The /chosen node should contain a 'linux,sysrq-reset-seq' child node to define +a set of keys. + +Required property: +sysrq-reset-seq: array of Linux keycodes, one keycode per cell. + +Optional property: +timeout-ms: duration keys must be pressed together in milliseconds before +generating a sysrq. If omitted the system is rebooted immediately when a valid +sequence has been recognized. + +Example: + + chosen { + linux,sysrq-reset-seq { + keyset = <0x03 + 0x04 + 0x0a>; + timeout-ms = <3000>; + }; + }; + +Would represent KEY_2, KEY_3 and KEY_9. diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt index df70318a617f..49fa14ed155c 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt @@ -6,7 +6,7 @@ Required properties: - interrupt-parent: the phandle for the interrupt controller - interrupts: touch controller interrupt - wakeup-gpios: the gpio pin to be used for waking up the controller - as well as uased as irq pin + and also used as irq pin Example: diff --git a/MAINTAINERS b/MAINTAINERS index 10533173e153..e775ecaf5d1f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2494,9 +2494,9 @@ S: Maintained F: drivers/media/common/cypress_firmware* CYTTSP TOUCHSCREEN DRIVER -M: Javier Martinez Canillas <javier@dowhile0.org> +M: Ferruh Yigit <fery@cypress.com> L: linux-input@vger.kernel.org -S: Maintained +S: Supported F: drivers/input/touchscreen/cyttsp* F: include/linux/input/cyttsp.h @@ -4141,6 +4141,13 @@ W: http://launchpad.net/ideapad-laptop S: Maintained F: drivers/platform/x86/ideapad-laptop.c +IDEAPAD LAPTOP SLIDEBAR DRIVER +M: Andrey Moiseev <o2g.org.ru@gmail.com> +L: linux-input@vger.kernel.org +W: https://github.com/o2genum/ideapad-slidebar +S: Maintained +F: drivers/input/misc/ideapad_slidebar.c + IDE/ATAPI DRIVERS M: Borislav Petkov <bp@alien8.de> L: linux-ide@vger.kernel.org diff --git a/drivers/input/joystick/as5011.c b/drivers/input/joystick/as5011.c index 121cd63d3334..005d852a06e9 100644 --- a/drivers/input/joystick/as5011.c +++ b/drivers/input/joystick/as5011.c @@ -234,7 +234,7 @@ static int as5011_probe(struct i2c_client *client, int irq; int error; - plat_data = client->dev.platform_data; + plat_data = dev_get_platdata(&client->dev); if (!plat_data) return -EINVAL; @@ -288,6 +288,7 @@ static int as5011_probe(struct i2c_client *client, if (irq < 0) { dev_err(&client->dev, "Failed to get irq number for button gpio\n"); + error = irq; goto err_free_button_gpio; } diff --git a/drivers/input/joystick/maplecontrol.c b/drivers/input/joystick/maplecontrol.c index 59c10ec5a2a1..8aa6e4c497da 100644 --- a/drivers/input/joystick/maplecontrol.c +++ b/drivers/input/joystick/maplecontrol.c @@ -61,7 +61,7 @@ static void dc_pad_callback(struct mapleq *mq) static int dc_pad_open(struct input_dev *dev) { - struct dc_pad *pad = dev->dev.platform_data; + struct dc_pad *pad = dev_get_platdata(&dev->dev); maple_getcond_callback(pad->mdev, dc_pad_callback, HZ/20, MAPLE_FUNC_CONTROLLER); @@ -71,7 +71,7 @@ static int dc_pad_open(struct input_dev *dev) static void dc_pad_close(struct input_dev *dev) { - struct dc_pad *pad = dev->dev.platform_data; + struct dc_pad *pad = dev_get_platdata(&dev->dev); maple_getcond_callback(pad->mdev, dc_pad_callback, 0, MAPLE_FUNC_CONTROLLER); diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c index 03c8cc5cb6c1..328cfc1eed95 100644 --- a/drivers/input/keyboard/imx_keypad.c +++ b/drivers/input/keyboard/imx_keypad.c @@ -442,12 +442,6 @@ static int imx_keypad_probe(struct platform_device *pdev) return -EINVAL; } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "no I/O memory defined in platform data\n"); - return -EINVAL; - } - input_dev = devm_input_allocate_device(&pdev->dev); if (!input_dev) { dev_err(&pdev->dev, "failed to allocate the input device\n"); @@ -468,6 +462,7 @@ static int imx_keypad_probe(struct platform_device *pdev) setup_timer(&keypad->check_matrix_timer, imx_keypad_check_for_events, (unsigned long) keypad); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); keypad->mmio_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(keypad->mmio_base)) return PTR_ERR(keypad->mmio_base); diff --git a/drivers/input/keyboard/max7359_keypad.c b/drivers/input/keyboard/max7359_keypad.c index 7c7af2b01e65..bc2cdaf563fd 100644 --- a/drivers/input/keyboard/max7359_keypad.c +++ b/drivers/input/keyboard/max7359_keypad.c @@ -271,7 +271,7 @@ static int max7359_remove(struct i2c_client *client) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int max7359_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); diff --git a/drivers/input/keyboard/nspire-keypad.c b/drivers/input/keyboard/nspire-keypad.c index 20d872d6f603..b3e3edab6d9f 100644 --- a/drivers/input/keyboard/nspire-keypad.c +++ b/drivers/input/keyboard/nspire-keypad.c @@ -171,12 +171,6 @@ static int nspire_keypad_probe(struct platform_device *pdev) return -EINVAL; } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "missing platform resources\n"); - return -EINVAL; - } - keypad = devm_kzalloc(&pdev->dev, sizeof(struct nspire_keypad), GFP_KERNEL); if (!keypad) { @@ -208,6 +202,7 @@ static int nspire_keypad_probe(struct platform_device *pdev) return PTR_ERR(keypad->clk); } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); keypad->reg_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(keypad->reg_base)) return PTR_ERR(keypad->reg_base); diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c index f4aa53a1fd69..30acfd49fa6c 100644 --- a/drivers/input/keyboard/omap4-keypad.c +++ b/drivers/input/keyboard/omap4-keypad.c @@ -53,21 +53,17 @@ #define OMAP4_KBD_FULLCODE63_32 0x48 /* OMAP4 bit definitions */ -#define OMAP4_DEF_IRQENABLE_EVENTEN (1 << 0) -#define OMAP4_DEF_IRQENABLE_LONGKEY (1 << 1) -#define OMAP4_DEF_IRQENABLE_TIMEOUTEN (1 << 2) -#define OMAP4_DEF_WUP_EVENT_ENA (1 << 0) -#define OMAP4_DEF_WUP_LONG_KEY_ENA (1 << 1) -#define OMAP4_DEF_CTRL_NOSOFTMODE (1 << 1) -#define OMAP4_DEF_CTRLPTVVALUE (1 << 2) -#define OMAP4_DEF_CTRLPTV (1 << 1) +#define OMAP4_DEF_IRQENABLE_EVENTEN BIT(0) +#define OMAP4_DEF_IRQENABLE_LONGKEY BIT(1) +#define OMAP4_DEF_WUP_EVENT_ENA BIT(0) +#define OMAP4_DEF_WUP_LONG_KEY_ENA BIT(1) +#define OMAP4_DEF_CTRL_NOSOFTMODE BIT(1) +#define OMAP4_DEF_CTRL_PTV_SHIFT 2 /* OMAP4 values */ -#define OMAP4_VAL_IRQDISABLE 0x00 -#define OMAP4_VAL_DEBOUNCINGTIME 0x07 -#define OMAP4_VAL_FUNCTIONALCFG 0x1E - -#define OMAP4_MASK_IRQSTATUSDISABLE 0xFFFF +#define OMAP4_VAL_IRQDISABLE 0x0 +#define OMAP4_VAL_DEBOUNCINGTIME 0x7 +#define OMAP4_VAL_PVT 0x7 enum { KBD_REVISION_OMAP4 = 0, @@ -78,6 +74,7 @@ struct omap4_keypad { struct input_dev *input; void __iomem *base; + bool irq_wake_enabled; unsigned int irq; unsigned int rows; @@ -116,8 +113,22 @@ static void kbd_write_irqreg(struct omap4_keypad *keypad_data, } -/* Interrupt handler */ -static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id) +/* Interrupt handlers */ +static irqreturn_t omap4_keypad_irq_handler(int irq, void *dev_id) +{ + struct omap4_keypad *keypad_data = dev_id; + + if (kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)) { + /* Disable interrupts */ + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, + OMAP4_VAL_IRQDISABLE); + return IRQ_WAKE_THREAD; + } + + return IRQ_NONE; +} + +static irqreturn_t omap4_keypad_irq_thread_fn(int irq, void *dev_id) { struct omap4_keypad *keypad_data = dev_id; struct input_dev *input_dev = keypad_data->input; @@ -125,10 +136,6 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id) unsigned int col, row, code, changed; u32 *new_state = (u32 *) key_state; - /* Disable interrupts */ - kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, - OMAP4_VAL_IRQDISABLE); - *new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0); *(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32); @@ -175,11 +182,13 @@ static int omap4_keypad_open(struct input_dev *input) disable_irq(keypad_data->irq); kbd_writel(keypad_data, OMAP4_KBD_CTRL, - OMAP4_VAL_FUNCTIONALCFG); + OMAP4_DEF_CTRL_NOSOFTMODE | + (OMAP4_VAL_PVT << OMAP4_DEF_CTRL_PTV_SHIFT)); kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME, OMAP4_VAL_DEBOUNCINGTIME); + /* clear pending interrupts */ kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, - OMAP4_VAL_IRQDISABLE); + kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY); @@ -363,14 +372,15 @@ static int omap4_keypad_probe(struct platform_device *pdev) goto err_free_keymap; } - error = request_irq(keypad_data->irq, omap4_keypad_interrupt, - IRQF_TRIGGER_RISING, - "omap4-keypad", keypad_data); + error = request_threaded_irq(keypad_data->irq, omap4_keypad_irq_handler, + omap4_keypad_irq_thread_fn, 0, + "omap4-keypad", keypad_data); if (error) { dev_err(&pdev->dev, "failed to register interrupt\n"); goto err_free_input; } + device_init_wakeup(&pdev->dev, true); pm_runtime_put_sync(&pdev->dev); error = input_register_device(keypad_data->input); @@ -384,6 +394,7 @@ static int omap4_keypad_probe(struct platform_device *pdev) err_pm_disable: pm_runtime_disable(&pdev->dev); + device_init_wakeup(&pdev->dev, false); free_irq(keypad_data->irq, keypad_data); err_free_keymap: kfree(keypad_data->keymap); @@ -409,6 +420,8 @@ static int omap4_keypad_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); + device_init_wakeup(&pdev->dev, false); + input_unregister_device(keypad_data->input); iounmap(keypad_data->base); @@ -430,12 +443,46 @@ static const struct of_device_id omap_keypad_dt_match[] = { MODULE_DEVICE_TABLE(of, omap_keypad_dt_match); #endif +#ifdef CONFIG_PM_SLEEP +static int omap4_keypad_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct omap4_keypad *keypad_data = platform_get_drvdata(pdev); + int error; + + if (device_may_wakeup(&pdev->dev)) { + error = enable_irq_wake(keypad_data->irq); + if (!error) + keypad_data->irq_wake_enabled = true; + } + + return 0; +} + +static int omap4_keypad_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct omap4_keypad *keypad_data = platform_get_drvdata(pdev); + + if (device_may_wakeup(&pdev->dev) && keypad_data->irq_wake_enabled) { + disable_irq_wake(keypad_data->irq); + keypad_data->irq_wake_enabled = false; + } + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(omap4_keypad_pm_ops, + omap4_keypad_suspend, omap4_keypad_resume); + static struct platform_driver omap4_keypad_driver = { .probe = omap4_keypad_probe, .remove = omap4_keypad_remove, .driver = { .name = "omap4-keypad", .owner = THIS_MODULE, + .pm = &omap4_keypad_pm_ops, .of_match_table = of_match_ptr(omap_keypad_dt_match), }, }; diff --git a/drivers/input/keyboard/qt1070.c b/drivers/input/keyboard/qt1070.c index 42b773b3125a..6c561ec3cc09 100644 --- a/drivers/input/keyboard/qt1070.c +++ b/drivers/input/keyboard/qt1070.c @@ -243,6 +243,32 @@ static int qt1070_remove(struct i2c_client *client) return 0; } +#ifdef CONFIG_PM_SLEEP +static int qt1070_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct qt1070_data *data = i2c_get_clientdata(client); + + if (device_may_wakeup(dev)) + enable_irq_wake(data->irq); + + return 0; +} + +static int qt1070_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct qt1070_data *data = i2c_get_clientdata(client); + + if (device_may_wakeup(dev)) + disable_irq_wake(data->irq); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(qt1070_pm_ops, qt1070_suspend, qt1070_resume); + static const struct i2c_device_id qt1070_id[] = { { "qt1070", 0 }, { }, @@ -253,6 +279,7 @@ static struct i2c_driver qt1070_driver = { .driver = { .name = "qt1070", .owner = THIS_MODULE, + .pm = &qt1070_pm_ops, }, .id_table = qt1070_id, .probe = qt1070_probe, diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c index 7111124b5362..85ff530d9a91 100644 --- a/drivers/input/keyboard/spear-keyboard.c +++ b/drivers/input/keyboard/spear-keyboard.c @@ -191,12 +191,6 @@ static int spear_kbd_probe(struct platform_device *pdev) int irq; int error; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "no keyboard resource defined\n"); - return -EBUSY; - } - irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(&pdev->dev, "not able to get irq for the device\n"); @@ -228,6 +222,7 @@ static int spear_kbd_probe(struct platform_device *pdev) kbd->suspended_rate = pdata->suspended_rate; } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); kbd->io_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(kbd->io_base)) return PTR_ERR(kbd->io_base); diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c index b46142f78ef2..9cd20e6905a0 100644 --- a/drivers/input/keyboard/tegra-kbc.c +++ b/drivers/input/keyboard/tegra-kbc.c @@ -638,12 +638,6 @@ static int tegra_kbc_probe(struct platform_device *pdev) if (!tegra_kbc_check_pin_cfg(kbc, &num_rows)) return -EINVAL; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "failed to get I/O memory\n"); - return -ENXIO; - } - kbc->irq = platform_get_irq(pdev, 0); if (kbc->irq < 0) { dev_err(&pdev->dev, "failed to get keyboard IRQ\n"); @@ -658,6 +652,7 @@ static int tegra_kbc_probe(struct platform_device *pdev) setup_timer(&kbc->timer, tegra_kbc_keypress_timer, (unsigned long)kbc); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); kbc->mmio = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(kbc->mmio)) return PTR_ERR(kbc->mmio); diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 0b541cdf9b8e..aa51baaa9b1e 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -647,4 +647,14 @@ config INPUT_SIRFSOC_ONKEY If unsure, say N. +config INPUT_IDEAPAD_SLIDEBAR + tristate "IdeaPad Laptop Slidebar" + depends on INPUT + depends on SERIO_I8042 + help + Say Y here if you have an IdeaPad laptop with a slidebar. + + To compile this driver as a module, choose M here: the + module will be called ideapad_slidebar. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 829de43a2427..0ebfb6dbf0f7 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -61,3 +61,4 @@ obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND) += xen-kbdfront.o obj-$(CONFIG_INPUT_YEALINK) += yealink.o +obj-$(CONFIG_INPUT_IDEAPAD_SLIDEBAR) += ideapad_slidebar.o diff --git a/drivers/input/misc/ideapad_slidebar.c b/drivers/input/misc/ideapad_slidebar.c new file mode 100644 index 000000000000..edfd6239f131 --- /dev/null +++ b/drivers/input/misc/ideapad_slidebar.c @@ -0,0 +1,358 @@ +/* + * Input driver for slidebars on some Lenovo IdeaPad laptops + * + * Copyright (C) 2013 Andrey Moiseev <o2g.org.ru@gmail.com> + * + * Reverse-engineered from Lenovo SlideNav software (SBarHook.dll). + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * Trademarks are the property of their respective owners. + */ + +/* + * Currently tested and works on: + * Lenovo IdeaPad Y550 + * Lenovo IdeaPad Y550P + * + * Other models can be added easily. To test, + * load with 'force' parameter set 'true'. + * + * LEDs blinking and input mode are managed via sysfs, + * (hex, unsigned byte value): + * /sys/devices/platform/ideapad_slidebar/slidebar_mode + * + * The value is in byte range, however, I only figured out + * how bits 0b10011001 work. Some other bits, probably, + * are meaningfull too. + * + * Possible states: + * + * STD_INT, ONMOV_INT, OFF_INT, LAST_POLL, OFF_POLL + * + * Meaning: + * released touched + * STD 'heartbeat' lights follow the finger + * ONMOV no lights lights follow the finger + * LAST at last pos lights follow the finger + * OFF no lights no lights + * + * INT all input events are generated, interrupts are used + * POLL no input events by default, to get them, + * send 0b10000000 (read below) + * + * Commands: write + * + * All | 0b01001 -> STD_INT + * possible | 0b10001 -> ONMOV_INT + * states | 0b01000 -> OFF_INT + * + * | 0b0 -> LAST_POLL + * STD_INT or ONMOV_INT | + * | 0b1 -> STD_INT + * + * | 0b0 -> OFF_POLL + * OFF_INT or OFF_POLL | + * | 0b1 -> OFF_INT + * + * Any state | 0b10000000 -> if the slidebar has updated data, + * produce one input event (last position), + * switch to respective POLL mode + * (like 0x0), if not in POLL mode yet. + * + * Get current state: read + * + * masked by 0x11 read value means: + * + * 0x00 LAST + * 0x01 STD + * 0x10 OFF + * 0x11 ONMOV + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/dmi.h> +#include <linux/spinlock.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/i8042.h> +#include <linux/serio.h> + +#define IDEAPAD_BASE 0xff29 + +static bool force; +module_param(force, bool, 0); +MODULE_PARM_DESC(force, "Force driver load, ignore DMI data"); + +static DEFINE_SPINLOCK(io_lock); + +static struct input_dev *slidebar_input_dev; +static struct platform_device *slidebar_platform_dev; + +static u8 slidebar_pos_get(void) +{ + u8 res; + unsigned long flags; + + spin_lock_irqsave(&io_lock, flags); + outb(0xf4, 0xff29); + outb(0xbf, 0xff2a); + res = inb(0xff2b); + spin_unlock_irqrestore(&io_lock, flags); + + return res; +} + +static u8 slidebar_mode_get(void) +{ + u8 res; + unsigned long flags; + + spin_lock_irqsave(&io_lock, flags); + outb(0xf7, 0xff29); + outb(0x8b, 0xff2a); + res = inb(0xff2b); + spin_unlock_irqrestore(&io_lock, flags); + + return res; +} + +static void slidebar_mode_set(u8 mode) +{ + unsigned long flags; + + spin_lock_irqsave(&io_lock, flags); + outb(0xf7, 0xff29); + outb(0x8b, 0xff2a); + outb(mode, 0xff2b); + spin_unlock_irqrestore(&io_lock, flags); +} + +static bool slidebar_i8042_filter(unsigned char data, unsigned char str, + struct serio *port) +{ + static bool extended = false; + + /* We are only interested in data coming form KBC port */ + if (str & I8042_STR_AUXDATA) + return false; + + /* Scancodes: e03b on move, e0bb on release. */ + if (data == 0xe0) { + extended = true; + return true; + } + + if (!extended) + return false; + + extended = false; + + if (likely((data & 0x7f) != 0x3b)) { + serio_interrupt(port, 0xe0, 0); + return false; + } + + if (data & 0x80) { + input_report_key(slidebar_input_dev, BTN_TOUCH, 0); + } else { + input_report_key(slidebar_input_dev, BTN_TOUCH, 1); + input_report_abs(slidebar_input_dev, ABS_X, slidebar_pos_get()); + } + input_sync(slidebar_input_dev); + + return true; +} + +static ssize_t show_slidebar_mode(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return sprintf(buf, "%x\n", slidebar_mode_get()); +} + +static ssize_t store_slidebar_mode(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + u8 mode; + int error; + + error = kstrtou8(buf, 0, &mode); + if (error) + return error; + + slidebar_mode_set(mode); + + return count; +} + +static DEVICE_ATTR(slidebar_mode, S_IWUSR | S_IRUGO, + show_slidebar_mode, store_slidebar_mode); + +static struct attribute *ideapad_attrs[] = { + &dev_attr_slidebar_mode.attr, + NULL +}; + +static struct attribute_group ideapad_attr_group = { + .attrs = ideapad_attrs +}; + +static const struct attribute_group *ideapad_attr_groups[] = { + &ideapad_attr_group, + NULL +}; + +static int __init ideapad_probe(struct platform_device* pdev) +{ + int err; + + if (!request_region(IDEAPAD_BASE, 3, "ideapad_slidebar")) { + dev_err(&pdev->dev, "IO ports are busy\n"); + return -EBUSY; + } + + slidebar_input_dev = input_allocate_device(); + if (!slidebar_input_dev) { + dev_err(&pdev->dev, "Failed to allocate input device\n"); + err = -ENOMEM; + goto err_release_ports; + } + + slidebar_input_dev->name = "IdeaPad Slidebar"; + slidebar_input_dev->id.bustype = BUS_HOST; + slidebar_input_dev->dev.parent = &pdev->dev; + input_set_capability(slidebar_input_dev, EV_KEY, BTN_TOUCH); + input_set_capability(slidebar_input_dev, EV_ABS, ABS_X); + input_set_abs_params(slidebar_input_dev, ABS_X, 0, 0xff, 0, 0); + + err = i8042_install_filter(slidebar_i8042_filter); + if (err) { + dev_err(&pdev->dev, + "Failed to install i8042 filter: %d\n", err); + goto err_free_dev; + } + + err = input_register_device(slidebar_input_dev); + if (err) { + dev_err(&pdev->dev, + "Failed to register input device: %d\n", err); + goto err_remove_filter; + } + + return 0; + +err_remove_filter: + i8042_remove_filter(slidebar_i8042_filter); +err_free_dev: + input_free_device(slidebar_input_dev); +err_release_ports: + release_region(IDEAPAD_BASE, 3); + return err; +} + +static int ideapad_remove(struct platform_device *pdev) +{ + i8042_remove_filter(slidebar_i8042_filter); + input_unregister_device(slidebar_input_dev); + release_region(IDEAPAD_BASE, 3); + + return 0; +} + +static struct platform_driver slidebar_drv = { + .driver = { + .name = "ideapad_slidebar", + .owner = THIS_MODULE, + }, + .remove = ideapad_remove, +}; + +static int __init ideapad_dmi_check(const struct dmi_system_id *id) +{ + pr_info("Laptop model '%s'\n", id->ident); + return 1; +} + +static const struct dmi_system_id ideapad_dmi[] __initconst = { + { + .ident = "Lenovo IdeaPad Y550", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "20017"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo IdeaPad Y550") + }, + .callback = ideapad_dmi_check + }, + { + .ident = "Lenovo IdeaPad Y550P", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "20035"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo IdeaPad Y550P") + }, + .callback = ideapad_dmi_check + }, + { NULL, } +}; +MODULE_DEVICE_TABLE(dmi, ideapad_dmi); + +static int __init slidebar_init(void) +{ + int err; + + if (!force && !dmi_check_system(ideapad_dmi)) { + pr_err("DMI does not match\n"); + return -ENODEV; + } + + slidebar_platform_dev = platform_device_alloc("ideapad_slidebar", -1); + if (!slidebar_platform_dev) { + pr_err("Not enough memory\n"); + return -ENOMEM; + } + + slidebar_platform_dev->dev.groups = ideapad_attr_groups; + + err = platform_device_add(slidebar_platform_dev); + if (err) { + pr_err("Failed to register platform device\n"); + goto err_free_dev; + } + + err = platform_driver_probe(&slidebar_drv, ideapad_probe); + if (err) { + pr_err("Failed to register platform driver\n"); + goto err_delete_dev; + } + + return 0; + +err_delete_dev: + platform_device_del(slidebar_platform_dev); +err_free_dev: + platform_device_put(slidebar_platform_dev); + return err; +} + +static void __exit slidebar_exit(void) +{ + platform_device_unregister(slidebar_platform_dev); + platform_driver_unregister(&slidebar_drv); +} + +module_init(slidebar_init); +module_exit(slidebar_exit); + +MODULE_AUTHOR("Andrey Moiseev <o2g.org.ru@gmail.com>"); +MODULE_DESCRIPTION("Slidebar input support for some Lenovo IdeaPad laptops"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c index a37f0c909aba..2ff4d1c78ab8 100644 --- a/drivers/input/misc/pwm-beeper.c +++ b/drivers/input/misc/pwm-beeper.c @@ -143,7 +143,7 @@ static int pwm_beeper_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int pwm_beeper_suspend(struct device *dev) { struct pwm_beeper *beeper = dev_get_drvdata(dev); diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c index 0c2dfc8e9691..7864b0c3ebb3 100644 --- a/drivers/input/misc/twl6040-vibra.c +++ b/drivers/input/misc/twl6040-vibra.c @@ -257,7 +257,6 @@ static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL); static int twl6040_vibra_probe(struct platform_device *pdev) { - struct twl6040_vibra_data *pdata = pdev->dev.platform_data; struct device *twl6040_core_dev = pdev->dev.parent; struct device_node *twl6040_core_node = NULL; struct vibra_info *info; @@ -270,8 +269,8 @@ static int twl6040_vibra_probe(struct platform_device *pdev) "vibra"); #endif - if (!pdata && !twl6040_core_node) { - dev_err(&pdev->dev, "platform_data not available\n"); + if (!twl6040_core_node) { + dev_err(&pdev->dev, "parent of node is missing?\n"); return -EINVAL; } @@ -284,27 +283,17 @@ static int twl6040_vibra_probe(struct platform_device *pdev) info->dev = &pdev->dev; info->twl6040 = dev_get_drvdata(pdev->dev.parent); - if (pdata) { - info->vibldrv_res = pdata->vibldrv_res; - info->vibrdrv_res = pdata->vibrdrv_res; - info->viblmotor_res = pdata->viblmotor_res; - info->vibrmotor_res = pdata->vibrmotor_res; - vddvibl_uV = pdata->vddvibl_uV; - vddvibr_uV = pdata->vddvibr_uV; - } else { - of_property_read_u32(twl6040_core_node, "ti,vibldrv-res", - &info->vibldrv_res); - of_property_read_u32(twl6040_core_node, "ti,vibrdrv-res", - &info->vibrdrv_res); - of_property_read_u32(twl6040_core_node, "ti,viblmotor-res", - &info->viblmotor_res); - of_property_read_u32(twl6040_core_node, "ti,vibrmotor-res", - &info->vibrmotor_res); - of_property_read_u32(twl6040_core_node, "ti,vddvibl-uV", - &vddvibl_uV); - of_property_read_u32(twl6040_core_node, "ti,vddvibr-uV", - &vddvibr_uV); - } + + of_property_read_u32(twl6040_core_node, "ti,vibldrv-res", + &info->vibldrv_res); + of_property_read_u32(twl6040_core_node, "ti,vibrdrv-res", + &info->vibrdrv_res); + of_property_read_u32(twl6040_core_node, "ti,viblmotor-res", + &info->viblmotor_res); + of_property_read_u32(twl6040_core_node, "ti,vibrmotor-res", + &info->vibrmotor_res); + of_property_read_u32(twl6040_core_node, "ti,vddvibl-uV", &vddvibl_uV); + of_property_read_u32(twl6040_core_node, "ti,vddvibr-uV", &vddvibr_uV); if ((!info->vibldrv_res && !info->viblmotor_res) || (!info->vibrdrv_res && !info->vibrmotor_res)) { @@ -334,8 +323,8 @@ static int twl6040_vibra_probe(struct platform_device *pdev) * When booted with Device tree the regulators are attached to the * parent device (twl6040 MFD core) */ - ret = regulator_bulk_get(pdata ? info->dev : twl6040_core_dev, - ARRAY_SIZE(info->supplies), info->supplies); + ret = regulator_bulk_get(twl6040_core_dev, ARRAY_SIZE(info->supplies), + info->supplies); if (ret) { dev_err(info->dev, "couldn't get regulators %d\n", ret); return ret; diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c index 56536f4b9572..b6505454bcc4 100644 --- a/drivers/input/misc/wistron_btns.c +++ b/drivers/input/misc/wistron_btns.c @@ -46,7 +46,6 @@ MODULE_AUTHOR("Miloslav Trmac <mitr@volny.cz>"); MODULE_DESCRIPTION("Wistron laptop button driver"); MODULE_LICENSE("GPL v2"); -MODULE_VERSION("0.3"); static bool force; /* = 0; */ module_param(force, bool, 0); @@ -563,7 +562,7 @@ static struct key_entry keymap_wistron_md96500[] __initdata = { { KE_KEY, 0x36, {KEY_WWW} }, { KE_WIFI, 0x30 }, { KE_BLUETOOTH, 0x44 }, - { KE_END, FE_UNTESTED } + { KE_END, 0 } }; static struct key_entry keymap_wistron_generic[] __initdata = { @@ -635,7 +634,7 @@ static struct key_entry keymap_prestigio[] __initdata = { * a list of buttons and their key codes (reported when loading this module * with force=1) and the output of dmidecode to $MODULE_AUTHOR. */ -static const struct dmi_system_id __initconst dmi_ids[] = { +static const struct dmi_system_id dmi_ids[] __initconst = { { /* Fujitsu-Siemens Amilo Pro V2000 */ .callback = dmi_matched, @@ -972,6 +971,7 @@ static const struct dmi_system_id __initconst dmi_ids[] = { }, { NULL, } }; +MODULE_DEVICE_TABLE(dmi, dmi_ids); /* Copy the good keymap, as the original ones are free'd */ static int __init copy_keymap(void) diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c index 2c4db636de6c..23222dd5a66f 100644 --- a/drivers/input/mouse/lifebook.c +++ b/drivers/input/mouse/lifebook.c @@ -44,7 +44,7 @@ static int lifebook_set_6byte_proto(const struct dmi_system_id *d) return 1; } -static const struct dmi_system_id __initconst lifebook_dmi_table[] = { +static const struct dmi_system_id lifebook_dmi_table[] __initconst = { { /* FLORA-ie 55mi */ .matches = { diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index b2420ae19e14..26386f9d2569 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -1433,7 +1433,7 @@ static int synaptics_reconnect(struct psmouse *psmouse) static bool impaired_toshiba_kbc; -static const struct dmi_system_id __initconst toshiba_dmi_table[] = { +static const struct dmi_system_id toshiba_dmi_table[] __initconst = { #if defined(CONFIG_DMI) && defined(CONFIG_X86) { /* Toshiba Satellite */ @@ -1472,7 +1472,7 @@ static const struct dmi_system_id __initconst toshiba_dmi_table[] = { static bool broken_olpc_ec; -static const struct dmi_system_id __initconst olpc_dmi_table[] = { +static const struct dmi_system_id olpc_dmi_table[] __initconst = { #if defined(CONFIG_DMI) && defined(CONFIG_OLPC) { /* OLPC XO-1 or XO-1.5 */ diff --git a/drivers/input/serio/arc_ps2.c b/drivers/input/serio/arc_ps2.c index 3fb7727c8ea5..8024a6d7fccb 100644 --- a/drivers/input/serio/arc_ps2.c +++ b/drivers/input/serio/arc_ps2.c @@ -189,12 +189,6 @@ static int arc_ps2_probe(struct platform_device *pdev) int irq; int error, id, i; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "no IO memory defined\n"); - return -EINVAL; - } - irq = platform_get_irq_byname(pdev, "arc_ps2_irq"); if (irq < 0) { dev_err(&pdev->dev, "no IRQ defined\n"); @@ -208,6 +202,7 @@ static int arc_ps2_probe(struct platform_device *pdev) return -ENOMEM; } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); arc_ps2->addr = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(arc_ps2->addr)) return PTR_ERR(arc_ps2->addr); diff --git a/drivers/input/serio/i8042.h b/drivers/input/serio/i8042.h index 3452708fbe3b..fc080beffedc 100644 --- a/drivers/input/serio/i8042.h +++ b/drivers/input/serio/i8042.h @@ -41,30 +41,6 @@ #define I8042_CTL_TIMEOUT 10000 /* - * Status register bits. - */ - -#define I8042_STR_PARITY 0x80 -#define I8042_STR_TIMEOUT 0x40 -#define I8042_STR_AUXDATA 0x20 -#define I8042_STR_KEYLOCK 0x10 -#define I8042_STR_CMDDAT 0x08 -#define I8042_STR_MUXERR 0x04 -#define I8042_STR_IBF 0x02 -#define I8042_STR_OBF 0x01 - -/* - * Control register bits. - */ - -#define I8042_CTR_KBDINT 0x01 -#define I8042_CTR_AUXINT 0x02 -#define I8042_CTR_IGNKEYLOCK 0x08 -#define I8042_CTR_KBDDIS 0x10 -#define I8042_CTR_AUXDIS 0x20 -#define I8042_CTR_XLATE 0x40 - -/* * Return codes. */ diff --git a/drivers/input/serio/olpc_apsp.c b/drivers/input/serio/olpc_apsp.c index 818aa466b5d2..51b1d40cc286 100644 --- a/drivers/input/serio/olpc_apsp.c +++ b/drivers/input/serio/olpc_apsp.c @@ -183,9 +183,6 @@ static int olpc_apsp_probe(struct platform_device *pdev) np = pdev->dev.of_node; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENOENT; - priv->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(priv->base)) { dev_err(&pdev->dev, "Failed to map WTM registers\n"); diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index aaf23aeae2ea..79b69ea47f74 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -221,39 +221,6 @@ static int wacom_calc_hid_res(int logical_extents, int physical_extents, return logical_extents / physical_extents; } -/* - * The physical dimension specified by the HID descriptor is likely not in - * the "100th of a mm" units expected by wacom_calculate_touch_res. This - * function adjusts the value of [xy]_phy based on the unit and exponent - * provided by the HID descriptor. If an error occurs durring conversion - * (e.g. from the unit being left unspecified) [xy]_phy is not modified. - */ -static void wacom_fix_phy_from_hid(struct wacom_features *features) -{ - int xres = wacom_calc_hid_res(features->x_max, features->x_phy, - features->unit, features->unitExpo); - int yres = wacom_calc_hid_res(features->y_max, features->y_phy, - features->unit, features->unitExpo); - - if (xres > 0 && yres > 0) { - features->x_phy = (100 * features->x_max) / xres; - features->y_phy = (100 * features->y_max) / yres; - } -} - -/* - * Static values for max X/Y and resolution of Pen interface is stored in - * features. This mean physical size of active area can be computed. - * This is useful to do when Pen and Touch have same active area of tablet. - * This means for Touch device, we only need to find max X/Y value and we - * have enough information to compute resolution of touch. - */ -static void wacom_set_phy_from_res(struct wacom_features *features) -{ - features->x_phy = (features->x_max * 100) / features->x_resolution; - features->y_phy = (features->y_max * 100) / features->y_resolution; -} - static int wacom_parse_logical_collection(unsigned char *report, struct wacom_features *features) { @@ -265,8 +232,6 @@ static int wacom_parse_logical_collection(unsigned char *report, features->pktlen = WACOM_PKGLEN_BBTOUCH3; features->device_type = BTN_TOOL_FINGER; - wacom_set_phy_from_res(features); - features->x_max = features->y_max = get_unaligned_le16(&report[10]); @@ -640,9 +605,6 @@ static int wacom_retrieve_hid_descriptor(struct usb_interface *intf, } } error = wacom_parse_hid(intf, hid_desc, features); - if (error) - goto out; - wacom_fix_phy_from_hid(features); out: return error; @@ -1228,7 +1190,6 @@ static void wacom_wireless_work(struct work_struct *work) *((struct wacom_features *)id->driver_info); wacom_wac2->features.pktlen = WACOM_PKGLEN_BBTOUCH3; wacom_wac2->features.device_type = BTN_TOOL_FINGER; - wacom_set_phy_from_res(&wacom_wac2->features); wacom_wac2->features.x_max = wacom_wac2->features.y_max = 4096; error = wacom_register_input(wacom2); if (error) @@ -1251,6 +1212,33 @@ fail1: return; } +/* + * Not all devices report physical dimensions from HID. + * Compute the default from hardcoded logical dimension + * and resolution before driver overwrites them. + */ +static void wacom_set_default_phy(struct wacom_features *features) +{ + if (features->x_resolution) { + features->x_phy = (features->x_max * 100) / + features->x_resolution; + features->y_phy = (features->y_max * 100) / + features->y_resolution; + } +} + +static void wacom_calculate_res(struct wacom_features *features) +{ + features->x_resolution = wacom_calc_hid_res(features->x_max, + features->x_phy, + features->unit, + features->unitExpo); + features->y_resolution = wacom_calc_hid_res(features->y_max, + features->y_phy, + features->unit, + features->unitExpo); +} + static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *dev = interface_to_usbdev(intf); @@ -1297,6 +1285,9 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i endpoint = &intf->cur_altsetting->endpoint[0].desc; + /* set the default size in case we do not get them from hid */ + wacom_set_default_phy(features); + /* Retrieve the physical and logical size for touch devices */ error = wacom_retrieve_hid_descriptor(intf, features); if (error) @@ -1312,8 +1303,6 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i features->device_type = BTN_TOOL_FINGER; features->pktlen = WACOM_PKGLEN_BBTOUCH3; - wacom_set_phy_from_res(features); - features->x_max = 4096; features->y_max = 4096; } else { @@ -1323,6 +1312,13 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i wacom_setup_device_quirks(features); + /* set unit to "100th of a mm" for devices not reported by HID */ + if (!features->unit) { + features->unit = 0x11; + features->unitExpo = 16 - 3; + } + wacom_calculate_res(features); + strlcpy(wacom_wac->name, features->name, sizeof(wacom_wac->name)); if (features->quirks & WACOM_QUIRK_MULTI_INPUT) { @@ -1334,7 +1330,6 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i " Pen" : " Finger", sizeof(wacom_wac->name)); - other_dev = wacom_get_sibling(dev, features->oVid, features->oPid); if (other_dev == NULL || wacom_get_usbdev_data(other_dev) == NULL) other_dev = dev; @@ -1366,8 +1361,10 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i usb_set_intfdata(intf, wacom); if (features->quirks & WACOM_QUIRK_MONITOR) { - if (usb_submit_urb(wacom->irq, GFP_KERNEL)) + if (usb_submit_urb(wacom->irq, GFP_KERNEL)) { + error = -EIO; goto fail5; + } } return 0; @@ -1422,8 +1419,8 @@ static int wacom_resume(struct usb_interface *intf) wacom_query_tablet_data(intf, features); wacom_led_control(wacom); - if ((wacom->open || features->quirks & WACOM_QUIRK_MONITOR) - && usb_submit_urb(wacom->irq, GFP_NOIO) < 0) + if ((wacom->open || (features->quirks & WACOM_QUIRK_MONITOR)) && + usb_submit_urb(wacom->irq, GFP_NOIO) < 0) rv = -EIO; mutex_unlock(&wacom->lock); diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index f3e91f0b57ae..b2aa503c16b1 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1445,13 +1445,6 @@ void wacom_setup_device_quirks(struct wacom_features *features) } } -static unsigned int wacom_calculate_touch_res(unsigned int logical_max, - unsigned int physical_max) -{ - /* Touch physical dimensions are in 100th of mm */ - return (logical_max * 100) / physical_max; -} - static void wacom_abs_set_axis(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { @@ -1475,11 +1468,9 @@ static void wacom_abs_set_axis(struct input_dev *input_dev, input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, features->y_fuzz, 0); input_abs_set_res(input_dev, ABS_X, - wacom_calculate_touch_res(features->x_max, - features->x_phy)); + features->x_resolution); input_abs_set_res(input_dev, ABS_Y, - wacom_calculate_touch_res(features->y_max, - features->y_phy)); + features->y_resolution); } if (features->touch_max > 1) { @@ -1488,11 +1479,9 @@ static void wacom_abs_set_axis(struct input_dev *input_dev, input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, features->y_max, features->y_fuzz, 0); input_abs_set_res(input_dev, ABS_MT_POSITION_X, - wacom_calculate_touch_res(features->x_max, - features->x_phy)); + features->x_resolution); input_abs_set_res(input_dev, ABS_MT_POSITION_Y, - wacom_calculate_touch_res(features->y_max, - features->y_phy)); + features->y_resolution); } } } diff --git a/drivers/input/touchscreen/cy8ctmg110_ts.c b/drivers/input/touchscreen/cy8ctmg110_ts.c index 96e0eedcc7e5..8c651985a5c4 100644 --- a/drivers/input/touchscreen/cy8ctmg110_ts.c +++ b/drivers/input/touchscreen/cy8ctmg110_ts.c @@ -291,7 +291,7 @@ err_free_mem: return err; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int cy8ctmg110_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); @@ -319,9 +319,9 @@ static int cy8ctmg110_resume(struct device *dev) } return 0; } +#endif static SIMPLE_DEV_PM_OPS(cy8ctmg110_pm, cy8ctmg110_suspend, cy8ctmg110_resume); -#endif static int cy8ctmg110_remove(struct i2c_client *client) { @@ -351,9 +351,7 @@ static struct i2c_driver cy8ctmg110_driver = { .driver = { .owner = THIS_MODULE, .name = CY8CTMG110_DRIVER_NAME, -#ifdef CONFIG_PM .pm = &cy8ctmg110_pm, -#endif }, .id_table = cy8ctmg110_idtable, .probe = cy8ctmg110_probe, diff --git a/drivers/input/touchscreen/cyttsp4_core.c b/drivers/input/touchscreen/cyttsp4_core.c index edcf7993034b..d038575f49db 100644 --- a/drivers/input/touchscreen/cyttsp4_core.c +++ b/drivers/input/touchscreen/cyttsp4_core.c @@ -1246,9 +1246,6 @@ static void cyttsp4_watchdog_timer(unsigned long handle) dev_vdbg(cd->dev, "%s: Watchdog timer triggered\n", __func__); - if (!cd) - return; - if (!work_pending(&cd->watchdog_work)) schedule_work(&cd->watchdog_work); @@ -1552,106 +1549,6 @@ exit: return rc; } -static int cyttsp4_core_sleep(struct cyttsp4 *cd) -{ - int rc; - - rc = cyttsp4_request_exclusive(cd, cd->dev, - CY_CORE_SLEEP_REQUEST_EXCLUSIVE_TIMEOUT); - if (rc < 0) { - dev_err(cd->dev, "%s: fail get exclusive ex=%p own=%p\n", - __func__, cd->exclusive_dev, cd->dev); - return 0; - } - - rc = cyttsp4_core_sleep_(cd); - - if (cyttsp4_release_exclusive(cd, cd->dev) < 0) - dev_err(cd->dev, "%s: fail to release exclusive\n", __func__); - else - dev_vdbg(cd->dev, "%s: pass release exclusive\n", __func__); - - return rc; -} - -static int cyttsp4_core_wake_(struct cyttsp4 *cd) -{ - struct device *dev = cd->dev; - int rc; - u8 mode; - int t; - - /* Already woken? */ - mutex_lock(&cd->system_lock); - if (cd->sleep_state == SS_SLEEP_OFF) { - mutex_unlock(&cd->system_lock); - return 0; - } - cd->int_status &= ~CY_INT_IGNORE; - cd->int_status |= CY_INT_AWAKE; - cd->sleep_state = SS_WAKING; - - if (cd->cpdata->power) { - dev_dbg(dev, "%s: Power up HW\n", __func__); - rc = cd->cpdata->power(cd->cpdata, 1, dev, &cd->ignore_irq); - } else { - dev_dbg(dev, "%s: No power function\n", __func__); - rc = -ENOSYS; - } - if (rc < 0) { - dev_err(dev, "%s: HW Power up fails r=%d\n", - __func__, rc); - - /* Initiate a read transaction to wake up */ - cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(mode), &mode); - } else - dev_vdbg(cd->dev, "%s: HW power up succeeds\n", - __func__); - mutex_unlock(&cd->system_lock); - - t = wait_event_timeout(cd->wait_q, - (cd->int_status & CY_INT_AWAKE) == 0, - msecs_to_jiffies(CY_CORE_WAKEUP_TIMEOUT)); - if (IS_TMO(t)) { - dev_err(dev, "%s: TMO waiting for wakeup\n", __func__); - mutex_lock(&cd->system_lock); - cd->int_status &= ~CY_INT_AWAKE; - /* Try starting up */ - cyttsp4_queue_startup_(cd); - mutex_unlock(&cd->system_lock); - } - - mutex_lock(&cd->system_lock); - cd->sleep_state = SS_SLEEP_OFF; - mutex_unlock(&cd->system_lock); - - cyttsp4_start_wd_timer(cd); - - return 0; -} - -static int cyttsp4_core_wake(struct cyttsp4 *cd) -{ - int rc; - - rc = cyttsp4_request_exclusive(cd, cd->dev, - CY_CORE_REQUEST_EXCLUSIVE_TIMEOUT); - if (rc < 0) { - dev_err(cd->dev, "%s: fail get exclusive ex=%p own=%p\n", - __func__, cd->exclusive_dev, cd->dev); - return 0; - } - - rc = cyttsp4_core_wake_(cd); - - if (cyttsp4_release_exclusive(cd, cd->dev) < 0) - dev_err(cd->dev, "%s: fail to release exclusive\n", __func__); - else - dev_vdbg(cd->dev, "%s: pass release exclusive\n", __func__); - - return rc; -} - static int cyttsp4_startup_(struct cyttsp4 *cd) { int retry = CY_CORE_STARTUP_RETRY_COUNT; @@ -1821,6 +1718,106 @@ static void cyttsp4_free_si_ptrs(struct cyttsp4 *cd) } #if defined(CONFIG_PM_SLEEP) || defined(CONFIG_PM_RUNTIME) +static int cyttsp4_core_sleep(struct cyttsp4 *cd) +{ + int rc; + + rc = cyttsp4_request_exclusive(cd, cd->dev, + CY_CORE_SLEEP_REQUEST_EXCLUSIVE_TIMEOUT); + if (rc < 0) { + dev_err(cd->dev, "%s: fail get exclusive ex=%p own=%p\n", + __func__, cd->exclusive_dev, cd->dev); + return 0; + } + + rc = cyttsp4_core_sleep_(cd); + + if (cyttsp4_release_exclusive(cd, cd->dev) < 0) + dev_err(cd->dev, "%s: fail to release exclusive\n", __func__); + else + dev_vdbg(cd->dev, "%s: pass release exclusive\n", __func__); + + return rc; +} + +static int cyttsp4_core_wake_(struct cyttsp4 *cd) +{ + struct device *dev = cd->dev; + int rc; + u8 mode; + int t; + + /* Already woken? */ + mutex_lock(&cd->system_lock); + if (cd->sleep_state == SS_SLEEP_OFF) { + mutex_unlock(&cd->system_lock); + return 0; + } + cd->int_status &= ~CY_INT_IGNORE; + cd->int_status |= CY_INT_AWAKE; + cd->sleep_state = SS_WAKING; + + if (cd->cpdata->power) { + dev_dbg(dev, "%s: Power up HW\n", __func__); + rc = cd->cpdata->power(cd->cpdata, 1, dev, &cd->ignore_irq); + } else { + dev_dbg(dev, "%s: No power function\n", __func__); + rc = -ENOSYS; + } + if (rc < 0) { + dev_err(dev, "%s: HW Power up fails r=%d\n", + __func__, rc); + + /* Initiate a read transaction to wake up */ + cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(mode), &mode); + } else + dev_vdbg(cd->dev, "%s: HW power up succeeds\n", + __func__); + mutex_unlock(&cd->system_lock); + + t = wait_event_timeout(cd->wait_q, + (cd->int_status & CY_INT_AWAKE) == 0, + msecs_to_jiffies(CY_CORE_WAKEUP_TIMEOUT)); + if (IS_TMO(t)) { + dev_err(dev, "%s: TMO waiting for wakeup\n", __func__); + mutex_lock(&cd->system_lock); + cd->int_status &= ~CY_INT_AWAKE; + /* Try starting up */ + cyttsp4_queue_startup_(cd); + mutex_unlock(&cd->system_lock); + } + + mutex_lock(&cd->system_lock); + cd->sleep_state = SS_SLEEP_OFF; + mutex_unlock(&cd->system_lock); + + cyttsp4_start_wd_timer(cd); + + return 0; +} + +static int cyttsp4_core_wake(struct cyttsp4 *cd) +{ + int rc; + + rc = cyttsp4_request_exclusive(cd, cd->dev, + CY_CORE_REQUEST_EXCLUSIVE_TIMEOUT); + if (rc < 0) { + dev_err(cd->dev, "%s: fail get exclusive ex=%p own=%p\n", + __func__, cd->exclusive_dev, cd->dev); + return 0; + } + + rc = cyttsp4_core_wake_(cd); + + if (cyttsp4_release_exclusive(cd, cd->dev) < 0) + dev_err(cd->dev, "%s: fail to release exclusive\n", __func__); + else + dev_vdbg(cd->dev, "%s: pass release exclusive\n", __func__); + + return rc; +} + static int cyttsp4_core_suspend(struct device *dev) { struct cyttsp4 *cd = dev_get_drvdata(dev); diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c index 8fe5086c8d2e..1ce3d29ffca5 100644 --- a/drivers/input/touchscreen/eeti_ts.c +++ b/drivers/input/touchscreen/eeti_ts.c @@ -264,7 +264,7 @@ static int eeti_ts_remove(struct i2c_client *client) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int eeti_ts_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); @@ -302,9 +302,9 @@ static int eeti_ts_resume(struct device *dev) return 0; } +#endif static SIMPLE_DEV_PM_OPS(eeti_ts_pm, eeti_ts_suspend, eeti_ts_resume); -#endif static const struct i2c_device_id eeti_ts_id[] = { { "eeti_ts", 0 }, @@ -315,9 +315,7 @@ MODULE_DEVICE_TABLE(i2c, eeti_ts_id); static struct i2c_driver eeti_ts_driver = { .driver = { .name = "eeti_ts", -#ifdef CONFIG_PM .pm = &eeti_ts_pm, -#endif }, .probe = eeti_ts_probe, .remove = eeti_ts_remove, diff --git a/drivers/input/touchscreen/htcpen.c b/drivers/input/touchscreen/htcpen.c index 6c4fb8436957..66500852341b 100644 --- a/drivers/input/touchscreen/htcpen.c +++ b/drivers/input/touchscreen/htcpen.c @@ -221,7 +221,7 @@ static struct isa_driver htcpen_isa_driver = { } }; -static struct dmi_system_id __initdata htcshift_dmi_table[] = { +static struct dmi_system_id htcshift_dmi_table[] __initdata = { { .ident = "Shift", .matches = { diff --git a/drivers/input/touchscreen/max11801_ts.c b/drivers/input/touchscreen/max11801_ts.c index 00bc6caa27f5..9f84fcd08732 100644 --- a/drivers/input/touchscreen/max11801_ts.c +++ b/drivers/input/touchscreen/max11801_ts.c @@ -181,12 +181,11 @@ static int max11801_ts_probe(struct i2c_client *client, struct input_dev *input_dev; int error; - data = kzalloc(sizeof(struct max11801_data), GFP_KERNEL); - input_dev = input_allocate_device(); + data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); + input_dev = devm_input_allocate_device(&client->dev); if (!data || !input_dev) { dev_err(&client->dev, "Failed to allocate memory\n"); - error = -ENOMEM; - goto err_free_mem; + return -ENOMEM; } data->client = client; @@ -205,38 +204,21 @@ static int max11801_ts_probe(struct i2c_client *client, max11801_ts_phy_init(data); - error = request_threaded_irq(client->irq, NULL, max11801_ts_interrupt, - IRQF_TRIGGER_LOW | IRQF_ONESHOT, - "max11801_ts", data); + error = devm_request_threaded_irq(&client->dev, client->irq, NULL, + max11801_ts_interrupt, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "max11801_ts", data); if (error) { dev_err(&client->dev, "Failed to register interrupt\n"); - goto err_free_mem; + return error; } error = input_register_device(data->input_dev); if (error) - goto err_free_irq; + return error; i2c_set_clientdata(client, data); return 0; - -err_free_irq: - free_irq(client->irq, data); -err_free_mem: - input_free_device(input_dev); - kfree(data); - return error; -} - -static int max11801_ts_remove(struct i2c_client *client) -{ - struct max11801_data *data = i2c_get_clientdata(client); - - free_irq(client->irq, data); - input_unregister_device(data->input_dev); - kfree(data); - - return 0; } static const struct i2c_device_id max11801_ts_id[] = { @@ -252,7 +234,6 @@ static struct i2c_driver max11801_ts_driver = { }, .id_table = max11801_ts_id, .probe = max11801_ts_probe, - .remove = max11801_ts_remove, }; module_i2c_driver(max11801_ts_driver); diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c index d5cc3acecfd3..40a9fe9d3b10 100644 --- a/drivers/tty/sysrq.c +++ b/drivers/tty/sysrq.c @@ -45,6 +45,7 @@ #include <linux/moduleparam.h> #include <linux/jiffies.h> #include <linux/syscalls.h> +#include <linux/of.h> #include <asm/ptrace.h> #include <asm/irq_regs.h> @@ -681,6 +682,40 @@ static void sysrq_detect_reset_sequence(struct sysrq_state *state, } } +#ifdef CONFIG_OF +static void sysrq_of_get_keyreset_config(void) +{ + u32 key; + struct device_node *np; + struct property *prop; + const __be32 *p; + + np = of_find_node_by_path("/chosen/linux,sysrq-reset-seq"); + if (!np) { + pr_debug("No sysrq node found"); + return; + } + + /* Reset in case a __weak definition was present */ + sysrq_reset_seq_len = 0; + + of_property_for_each_u32(np, "keyset", prop, p, key) { + if (key == KEY_RESERVED || key > KEY_MAX || + sysrq_reset_seq_len == SYSRQ_KEY_RESET_MAX) + break; + + sysrq_reset_seq[sysrq_reset_seq_len++] = (unsigned short)key; + } + + /* Get reset timeout if any. */ + of_property_read_u32(np, "timeout-ms", &sysrq_reset_downtime_ms); +} +#else +static void sysrq_of_get_keyreset_config(void) +{ +} +#endif + static void sysrq_reinject_alt_sysrq(struct work_struct *work) { struct sysrq_state *sysrq = @@ -914,6 +949,7 @@ static inline void sysrq_register_handler(void) int error; int i; + /* First check if a __weak interface was instantiated. */ for (i = 0; i < ARRAY_SIZE(sysrq_reset_seq); i++) { key = platform_sysrq_reset_seq[i]; if (key == KEY_RESERVED || key > KEY_MAX) @@ -922,6 +958,12 @@ static inline void sysrq_register_handler(void) sysrq_reset_seq[sysrq_reset_seq_len++] = key; } + /* + * DT configuration takes precedence over anything that would + * have been defined via the __weak interface. + */ + sysrq_of_get_keyreset_config(); + error = input_register_handler(&sysrq_handler); if (error) pr_err("Failed to register input handler, error %d", error); diff --git a/include/linux/i8042.h b/include/linux/i8042.h index a986ff588944..0f9bafa17a02 100644 --- a/include/linux/i8042.h +++ b/include/linux/i8042.h @@ -31,6 +31,30 @@ #define I8042_CMD_MUX_PFX 0x0090 #define I8042_CMD_MUX_SEND 0x1090 +/* + * Status register bits. + */ + +#define I8042_STR_PARITY 0x80 +#define I8042_STR_TIMEOUT 0x40 +#define I8042_STR_AUXDATA 0x20 +#define I8042_STR_KEYLOCK 0x10 +#define I8042_STR_CMDDAT 0x08 +#define I8042_STR_MUXERR 0x04 +#define I8042_STR_IBF 0x02 +#define I8042_STR_OBF 0x01 + +/* + * Control register bits. + */ + +#define I8042_CTR_KBDINT 0x01 +#define I8042_CTR_AUXINT 0x02 +#define I8042_CTR_IGNKEYLOCK 0x08 +#define I8042_CTR_KBDDIS 0x10 +#define I8042_CTR_AUXDIS 0x20 +#define I8042_CTR_XLATE 0x40 + struct serio; #if defined(CONFIG_SERIO_I8042) || defined(CONFIG_SERIO_I8042_MODULE) diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h index d584047b072b..d08abf9101d2 100644 --- a/include/uapi/linux/input.h +++ b/include/uapi/linux/input.h @@ -194,6 +194,8 @@ struct input_keymap_entry { #define SYN_CONFIG 1 #define SYN_MT_REPORT 2 #define SYN_DROPPED 3 +#define SYN_MAX 0xf +#define SYN_CNT (SYN_MAX+1) /* * Keys and buttons |