diff options
31 files changed, 578 insertions, 178 deletions
diff --git a/Documentation/devicetree/bindings/pwm/bcm-kona-pwm.txt b/Documentation/devicetree/bindings/pwm/bcm-kona-pwm.txt new file mode 100644 index 000000000000..8eae9fe7841c --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/bcm-kona-pwm.txt @@ -0,0 +1,21 @@ +Broadcom Kona PWM controller device tree bindings + +This controller has 6 channels. + +Required Properties : +- compatible: should contain "brcm,kona-pwm" +- reg: physical base address and length of the controller's registers +- clocks: phandle + clock specifier pair for the external clock +- #pwm-cells: Should be 3. See pwm.txt in this directory for a + description of the cells format. + +Refer to clocks/clock-bindings.txt for generic clock consumer properties. + +Example: + +pwm: pwm@3e01a000 { + compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm"; + reg = <0x3e01a000 0xc4>; + clocks = <&pwm_clk>; + #pwm-cells = <3>; +}; diff --git a/Documentation/pwm.txt b/Documentation/pwm.txt index 93cb97974986..ca895fd211e4 100644 --- a/Documentation/pwm.txt +++ b/Documentation/pwm.txt @@ -19,7 +19,8 @@ should instead register a static mapping that can be used to match PWM consumers to providers, as given in the following example: static struct pwm_lookup board_pwm_lookup[] = { - PWM_LOOKUP("tegra-pwm", 0, "pwm-backlight", NULL), + PWM_LOOKUP("tegra-pwm", 0, "pwm-backlight", NULL, + 50000, PWM_POLARITY_NORMAL), }; static void __init board_init(void) @@ -97,6 +98,13 @@ pwm_chip as argument which provides a description of the PWM chip, the number of PWM devices provided by the chip and the chip-specific implementation of the supported PWM operations to the framework. +When implementing polarity support in a PWM driver, make sure to respect the +signal conventions in the PWM framework. By definition, normal polarity +characterizes a signal starts high for the duration of the duty cycle and +goes low for the remainder of the period. Conversely, a signal with inversed +polarity starts low for the duration of the duty cycle and goes high for the +remainder of the period. + Locking ------- diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 660bfc5a70d7..e2e52031f056 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -60,7 +60,8 @@ static struct pwm_lookup pwm_lookup[] = { /* LEDB -> PMU_STAT */ - PWM_LOOKUP("twl-pwmled", 1, "leds_pwm", "beagleboard::pmu_stat"), + PWM_LOOKUP("twl-pwmled", 1, "leds_pwm", "beagleboard::pmu_stat", + 7812500, PWM_POLARITY_NORMAL), }; static struct led_pwm pwm_leds[] = { diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index a7c30eb0c8db..c66ad4edc5e3 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -574,7 +574,8 @@ static struct platform_device backlight = { }; static struct pwm_lookup hx4700_pwm_lookup[] = { - PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight", NULL), + PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight", NULL, + 30923, PWM_POLARITY_NORMAL), }; /* diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 01f81100c330..30fcac73a540 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -31,7 +31,7 @@ #include <linux/gpio_keys.h> #include <linux/regulator/driver.h> #include <linux/pinctrl/machine.h> -#include <linux/platform_data/pwm-renesas-tpu.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/regulator/fixed.h> #include <linux/regulator/gpio-regulator.h> @@ -399,24 +399,16 @@ static struct resource pwm_resources[] = { }, }; -static struct tpu_pwm_platform_data pwm_device_data = { - .channels[2] = { - .polarity = PWM_POLARITY_INVERSED, - } -}; - static struct platform_device pwm_device = { .name = "renesas-tpu-pwm", .id = -1, - .dev = { - .platform_data = &pwm_device_data, - }, .num_resources = ARRAY_SIZE(pwm_resources), .resource = pwm_resources, }; static struct pwm_lookup pwm_lookup[] = { - PWM_LOOKUP("renesas-tpu-pwm", 2, "pwm-backlight.0", NULL), + PWM_LOOKUP("renesas-tpu-pwm", 2, "pwm-backlight.0", NULL, + 33333, PWM_POLARITY_INVERSED), }; /* LCDC and backlight */ diff --git a/arch/arm/plat-samsung/dev-backlight.c b/arch/arm/plat-samsung/dev-backlight.c index be4ad0b21c08..2157c5b539e6 100644 --- a/arch/arm/plat-samsung/dev-backlight.c +++ b/arch/arm/plat-samsung/dev-backlight.c @@ -124,8 +124,6 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, samsung_bl_data->pwm_period_ns = bl_data->pwm_period_ns; if (bl_data->enable_gpio >= 0) samsung_bl_data->enable_gpio = bl_data->enable_gpio; - if (bl_data->enable_gpio_flags) - samsung_bl_data->enable_gpio_flags = bl_data->enable_gpio_flags; if (bl_data->init) samsung_bl_data->init = bl_data->init; if (bl_data->notify) diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c index 7d0aaed1e23a..aa770ec1e892 100644 --- a/drivers/leds/leds-pwm.c +++ b/drivers/leds/leds-pwm.c @@ -181,7 +181,6 @@ static int led_pwm_probe(struct platform_device *pdev) led_dat->cdev.name = cur_led->name; led_dat->cdev.default_trigger = cur_led->default_trigger; led_dat->active_low = cur_led->active_low; - led_dat->period = cur_led->pwm_period_ns; led_dat->cdev.brightness_set = led_pwm_set; led_dat->cdev.brightness = LED_OFF; led_dat->cdev.max_brightness = cur_led->max_brightness; @@ -191,6 +190,10 @@ static int led_pwm_probe(struct platform_device *pdev) if (led_dat->can_sleep) INIT_WORK(&led_dat->work, led_pwm_work); + led_dat->period = pwm_get_period(led_dat->pwm); + if (!led_dat->period && (cur_led->pwm_period_ns > 0)) + led_dat->period = cur_led->pwm_period_ns; + ret = led_classdev_register(&pdev->dev, &led_dat->cdev); if (ret < 0) goto err; diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index 5b34ff29ea38..4ad7b89a4cb4 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -62,6 +62,15 @@ config PWM_ATMEL_TCB To compile this driver as a module, choose M here: the module will be called pwm-atmel-tcb. +config PWM_BCM_KONA + tristate "Kona PWM support" + depends on ARCH_BCM_MOBILE + help + Generic PWM framework driver for Broadcom Kona PWM block. + + To compile this driver as a module, choose M here: the module + will be called pwm-bcm-kona. + config PWM_BFIN tristate "Blackfin PWM support" depends on BFIN_GPTIMERS diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile index e57d2c38a794..5c86a19d5d39 100644 --- a/drivers/pwm/Makefile +++ b/drivers/pwm/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_PWM_SYSFS) += sysfs.o obj-$(CONFIG_PWM_AB8500) += pwm-ab8500.o obj-$(CONFIG_PWM_ATMEL) += pwm-atmel.o obj-$(CONFIG_PWM_ATMEL_TCB) += pwm-atmel-tcb.o +obj-$(CONFIG_PWM_BCM_KONA) += pwm-bcm-kona.o obj-$(CONFIG_PWM_BFIN) += pwm-bfin.o obj-$(CONFIG_PWM_CLPS711X) += pwm-clps711x.o obj-$(CONFIG_PWM_EP93XX) += pwm-ep93xx.o diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c index a80471399c20..4b66bf09ee55 100644 --- a/drivers/pwm/core.c +++ b/drivers/pwm/core.c @@ -661,10 +661,16 @@ struct pwm_device *pwm_get(struct device *dev, const char *con_id) } } + mutex_unlock(&pwm_lookup_lock); + if (chip) pwm = pwm_request_from_chip(chip, index, con_id ?: dev_id); + if (IS_ERR(pwm)) + return pwm; + + pwm_set_period(pwm, p->period); + pwm_set_polarity(pwm, p->polarity); - mutex_unlock(&pwm_lookup_lock); return pwm; } diff --git a/drivers/pwm/pwm-ab8500.c b/drivers/pwm/pwm-ab8500.c index 1d07a6f99375..4c07a8420b37 100644 --- a/drivers/pwm/pwm-ab8500.c +++ b/drivers/pwm/pwm-ab8500.c @@ -20,10 +20,6 @@ #define AB8500_PWM_OUT_CTRL2_REG 0x61 #define AB8500_PWM_OUT_CTRL7_REG 0x66 -/* backlight driver constants */ -#define ENABLE_PWM 1 -#define DISABLE_PWM 0 - struct ab8500_pwm_chip { struct pwm_chip chip; }; @@ -64,7 +60,7 @@ static int ab8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) ret = abx500_mask_and_set_register_interruptible(chip->dev, AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG, - 1 << (chip->base - 1), ENABLE_PWM); + 1 << (chip->base - 1), 1 << (chip->base - 1)); if (ret < 0) dev_err(chip->dev, "%s: Failed to enable PWM, Error %d\n", pwm->label, ret); @@ -77,11 +73,10 @@ static void ab8500_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) ret = abx500_mask_and_set_register_interruptible(chip->dev, AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG, - 1 << (chip->base - 1), DISABLE_PWM); + 1 << (chip->base - 1), 0); if (ret < 0) dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n", pwm->label, ret); - return; } static const struct pwm_ops ab8500_pwm_ops = { @@ -101,10 +96,8 @@ static int ab8500_pwm_probe(struct platform_device *pdev) * device which is required for ab8500 read and write */ ab8500 = devm_kzalloc(&pdev->dev, sizeof(*ab8500), GFP_KERNEL); - if (ab8500 == NULL) { - dev_err(&pdev->dev, "failed to allocate memory\n"); + if (ab8500 == NULL) return -ENOMEM; - } ab8500->chip.dev = &pdev->dev; ab8500->chip.ops = &ab8500_pwm_ops; diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c index 0adc952cc4ef..6e700a541ca3 100644 --- a/drivers/pwm/pwm-atmel.c +++ b/drivers/pwm/pwm-atmel.c @@ -357,6 +357,7 @@ static int atmel_pwm_probe(struct platform_device *pdev) atmel_pwm->chip.base = -1; atmel_pwm->chip.npwm = 4; + atmel_pwm->chip.can_sleep = true; atmel_pwm->config = data->config; ret = pwmchip_add(&atmel_pwm->chip); diff --git a/drivers/pwm/pwm-bcm-kona.c b/drivers/pwm/pwm-bcm-kona.c new file mode 100644 index 000000000000..02bc048892a9 --- /dev/null +++ b/drivers/pwm/pwm-bcm-kona.c @@ -0,0 +1,318 @@ +/* + * Copyright (C) 2014 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/math64.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/slab.h> +#include <linux/types.h> + +/* + * The Kona PWM has some unusual characteristics. Here are the main points. + * + * 1) There is no disable bit and the hardware docs advise programming a zero + * duty to achieve output equivalent to that of a normal disable operation. + * + * 2) Changes to prescale, duty, period, and polarity do not take effect until + * a subsequent rising edge of the trigger bit. + * + * 3) If the smooth bit and trigger bit are both low, the output is a constant + * high signal. Otherwise, the earlier waveform continues to be output. + * + * 4) If the smooth bit is set on the rising edge of the trigger bit, output + * will transition to the new settings on a period boundary (which could be + * seconds away). If the smooth bit is clear, new settings will be applied + * as soon as possible (the hardware always has a 400ns delay). + * + * 5) When the external clock that feeds the PWM is disabled, output is pegged + * high or low depending on its state at that exact instant. + */ + +#define PWM_CONTROL_OFFSET (0x00000000) +#define PWM_CONTROL_SMOOTH_SHIFT(chan) (24 + (chan)) +#define PWM_CONTROL_TYPE_SHIFT(chan) (16 + (chan)) +#define PWM_CONTROL_POLARITY_SHIFT(chan) (8 + (chan)) +#define PWM_CONTROL_TRIGGER_SHIFT(chan) (chan) + +#define PRESCALE_OFFSET (0x00000004) +#define PRESCALE_SHIFT(chan) ((chan) << 2) +#define PRESCALE_MASK(chan) (0x7 << PRESCALE_SHIFT(chan)) +#define PRESCALE_MIN (0x00000000) +#define PRESCALE_MAX (0x00000007) + +#define PERIOD_COUNT_OFFSET(chan) (0x00000008 + ((chan) << 3)) +#define PERIOD_COUNT_MIN (0x00000002) +#define PERIOD_COUNT_MAX (0x00ffffff) + +#define DUTY_CYCLE_HIGH_OFFSET(chan) (0x0000000c + ((chan) << 3)) +#define DUTY_CYCLE_HIGH_MIN (0x00000000) +#define DUTY_CYCLE_HIGH_MAX (0x00ffffff) + +struct kona_pwmc { + struct pwm_chip chip; + void __iomem *base; + struct clk *clk; +}; + +static inline struct kona_pwmc *to_kona_pwmc(struct pwm_chip *_chip) +{ + return container_of(_chip, struct kona_pwmc, chip); +} + +static void kona_pwmc_apply_settings(struct kona_pwmc *kp, unsigned int chan) +{ + unsigned int value = readl(kp->base + PWM_CONTROL_OFFSET); + + /* Clear trigger bit but set smooth bit to maintain old output */ + value |= 1 << PWM_CONTROL_SMOOTH_SHIFT(chan); + value &= ~(1 << PWM_CONTROL_TRIGGER_SHIFT(chan)); + writel(value, kp->base + PWM_CONTROL_OFFSET); + + /* Set trigger bit and clear smooth bit to apply new settings */ + value &= ~(1 << PWM_CONTROL_SMOOTH_SHIFT(chan)); + value |= 1 << PWM_CONTROL_TRIGGER_SHIFT(chan); + writel(value, kp->base + PWM_CONTROL_OFFSET); +} + +static int kona_pwmc_config(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns) +{ + struct kona_pwmc *kp = to_kona_pwmc(chip); + u64 val, div, rate; + unsigned long prescale = PRESCALE_MIN, pc, dc; + unsigned int value, chan = pwm->hwpwm; + + /* + * Find period count, duty count and prescale to suit duty_ns and + * period_ns. This is done according to formulas described below: + * + * period_ns = 10^9 * (PRESCALE + 1) * PC / PWM_CLK_RATE + * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE + * + * PC = (PWM_CLK_RATE * period_ns) / (10^9 * (PRESCALE + 1)) + * DC = (PWM_CLK_RATE * duty_ns) / (10^9 * (PRESCALE + 1)) + */ + + rate = clk_get_rate(kp->clk); + + while (1) { + div = 1000000000; + div *= 1 + prescale; + val = rate * period_ns; + pc = div64_u64(val, div); + val = rate * duty_ns; + dc = div64_u64(val, div); + + /* If duty_ns or period_ns are not achievable then return */ + if (pc < PERIOD_COUNT_MIN || dc < DUTY_CYCLE_HIGH_MIN) + return -EINVAL; + + /* If pc and dc are in bounds, the calculation is done */ + if (pc <= PERIOD_COUNT_MAX && dc <= DUTY_CYCLE_HIGH_MAX) + break; + + /* Otherwise, increase prescale and recalculate pc and dc */ + if (++prescale > PRESCALE_MAX) + return -EINVAL; + } + + /* If the PWM channel is enabled, write the settings to the HW */ + if (test_bit(PWMF_ENABLED, &pwm->flags)) { + value = readl(kp->base + PRESCALE_OFFSET); + value &= ~PRESCALE_MASK(chan); + value |= prescale << PRESCALE_SHIFT(chan); + writel(value, kp->base + PRESCALE_OFFSET); + + writel(pc, kp->base + PERIOD_COUNT_OFFSET(chan)); + + writel(dc, kp->base + DUTY_CYCLE_HIGH_OFFSET(chan)); + + kona_pwmc_apply_settings(kp, chan); + } + + return 0; +} + +static int kona_pwmc_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, + enum pwm_polarity polarity) +{ + struct kona_pwmc *kp = to_kona_pwmc(chip); + unsigned int chan = pwm->hwpwm; + unsigned int value; + int ret; + + ret = clk_prepare_enable(kp->clk); + if (ret < 0) { + dev_err(chip->dev, "failed to enable clock: %d\n", ret); + return ret; + } + + value = readl(kp->base + PWM_CONTROL_OFFSET); + + if (polarity == PWM_POLARITY_NORMAL) + value |= 1 << PWM_CONTROL_POLARITY_SHIFT(chan); + else + value &= ~(1 << PWM_CONTROL_POLARITY_SHIFT(chan)); + + writel(value, kp->base + PWM_CONTROL_OFFSET); + + kona_pwmc_apply_settings(kp, chan); + + /* Wait for waveform to settle before gating off the clock */ + ndelay(400); + + clk_disable_unprepare(kp->clk); + + return 0; +} + +static int kona_pwmc_enable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct kona_pwmc *kp = to_kona_pwmc(chip); + int ret; + + ret = clk_prepare_enable(kp->clk); + if (ret < 0) { + dev_err(chip->dev, "failed to enable clock: %d\n", ret); + return ret; + } + + ret = kona_pwmc_config(chip, pwm, pwm->duty_cycle, pwm->period); + if (ret < 0) { + clk_disable_unprepare(kp->clk); + return ret; + } + + return 0; +} + +static void kona_pwmc_disable(struct pwm_chip *chip, struct pwm_device *pwm) +{ + struct kona_pwmc *kp = to_kona_pwmc(chip); + unsigned int chan = pwm->hwpwm; + + /* Simulate a disable by configuring for zero duty */ + writel(0, kp->base + DUTY_CYCLE_HIGH_OFFSET(chan)); + kona_pwmc_apply_settings(kp, chan); + + /* Wait for waveform to settle before gating off the clock */ + ndelay(400); + + clk_disable_unprepare(kp->clk); +} + +static const struct pwm_ops kona_pwm_ops = { + .config = kona_pwmc_config, + .set_polarity = kona_pwmc_set_polarity, + .enable = kona_pwmc_enable, + .disable = kona_pwmc_disable, + .owner = THIS_MODULE, +}; + +static int kona_pwmc_probe(struct platform_device *pdev) +{ + struct kona_pwmc *kp; + struct resource *res; + unsigned int chan; + unsigned int value = 0; + int ret = 0; + + kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL); + if (kp == NULL) + return -ENOMEM; + + platform_set_drvdata(pdev, kp); + + kp->chip.dev = &pdev->dev; + kp->chip.ops = &kona_pwm_ops; + kp->chip.base = -1; + kp->chip.npwm = 6; + kp->chip.of_xlate = of_pwm_xlate_with_flags; + kp->chip.of_pwm_n_cells = 3; + kp->chip.can_sleep = true; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + kp->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(kp->base)) + return PTR_ERR(kp->base); + + kp->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(kp->clk)) { + dev_err(&pdev->dev, "failed to get clock: %ld\n", + PTR_ERR(kp->clk)); + return PTR_ERR(kp->clk); + } + + ret = clk_prepare_enable(kp->clk); + if (ret < 0) { + dev_err(&pdev->dev, "failed to enable clock: %d\n", ret); + return ret; + } + + /* Set smooth mode, push/pull, and normal polarity for all channels */ + for (chan = 0; chan < kp->chip.npwm; chan++) { + value |= (1 << PWM_CONTROL_SMOOTH_SHIFT(chan)); + value |= (1 << PWM_CONTROL_TYPE_SHIFT(chan)); + value |= (1 << PWM_CONTROL_POLARITY_SHIFT(chan)); + } + + writel(value, kp->base + PWM_CONTROL_OFFSET); + + clk_disable_unprepare(kp->clk); + + ret = pwmchip_add(&kp->chip); + if (ret < 0) + dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret); + + return ret; +} + +static int kona_pwmc_remove(struct platform_device *pdev) +{ + struct kona_pwmc *kp = platform_get_drvdata(pdev); + unsigned int chan; + + for (chan = 0; chan < kp->chip.npwm; chan++) + if (test_bit(PWMF_ENABLED, &kp->chip.pwms[chan].flags)) + clk_disable_unprepare(kp->clk); + + return pwmchip_remove(&kp->chip); +} + +static const struct of_device_id bcm_kona_pwmc_dt[] = { + { .compatible = "brcm,kona-pwm" }, + { }, +}; +MODULE_DEVICE_TABLE(of, bcm_kona_pwmc_dt); + +static struct platform_driver kona_pwmc_driver = { + .driver = { + .name = "bcm-kona-pwm", + .of_match_table = bcm_kona_pwmc_dt, + }, + .probe = kona_pwmc_probe, + .remove = kona_pwmc_remove, +}; +module_platform_driver(kona_pwmc_driver); + +MODULE_AUTHOR("Broadcom Corporation <bcm-kernel-feedback-list@broadcom.com>"); +MODULE_AUTHOR("Tim Kryger <tkryger@broadcom.com>"); +MODULE_DESCRIPTION("Broadcom Kona PWM driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pwm/pwm-fsl-ftm.c b/drivers/pwm/pwm-fsl-ftm.c index 420169e96b5f..a18bc8fea385 100644 --- a/drivers/pwm/pwm-fsl-ftm.c +++ b/drivers/pwm/pwm-fsl-ftm.c @@ -454,6 +454,7 @@ static int fsl_pwm_probe(struct platform_device *pdev) fpc->chip.of_pwm_n_cells = 3; fpc->chip.base = -1; fpc->chip.npwm = 8; + fpc->chip.can_sleep = true; ret = pwmchip_add(&fpc->chip); if (ret < 0) { diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c index cc4773344874..d797c7b84c3f 100644 --- a/drivers/pwm/pwm-imx.c +++ b/drivers/pwm/pwm-imx.c @@ -241,10 +241,8 @@ static int imx_pwm_probe(struct platform_device *pdev) return -ENODEV; imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL); - if (imx == NULL) { - dev_err(&pdev->dev, "failed to allocate memory\n"); + if (imx == NULL) return -ENOMEM; - } imx->clk_per = devm_clk_get(&pdev->dev, "per"); if (IS_ERR(imx->clk_per)) { diff --git a/drivers/pwm/pwm-lp3943.c b/drivers/pwm/pwm-lp3943.c index a40b9c34e9ff..2c39b0e50fa4 100644 --- a/drivers/pwm/pwm-lp3943.c +++ b/drivers/pwm/pwm-lp3943.c @@ -278,6 +278,7 @@ static int lp3943_pwm_probe(struct platform_device *pdev) lp3943_pwm->chip.dev = &pdev->dev; lp3943_pwm->chip.ops = &lp3943_pwm_ops; lp3943_pwm->chip.npwm = LP3943_NUM_PWMS; + lp3943_pwm->chip.can_sleep = true; platform_set_drvdata(pdev, lp3943_pwm); diff --git a/drivers/pwm/pwm-lpss.c b/drivers/pwm/pwm-lpss.c index 449e372050a0..44ce6c6103ae 100644 --- a/drivers/pwm/pwm-lpss.c +++ b/drivers/pwm/pwm-lpss.c @@ -6,6 +6,7 @@ * Author: Chew Kean Ho <kean.ho.chew@intel.com> * Author: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com> * Author: Chew Chiau Ee <chiau.ee.chew@intel.com> + * Author: Alan Cox <alan@linux.intel.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -19,6 +20,9 @@ #include <linux/module.h> #include <linux/pwm.h> #include <linux/platform_device.h> +#include <linux/pci.h> + +static int pci_drv, plat_drv; /* So we know which drivers registered */ #define PWM 0x00000000 #define PWM_ENABLE BIT(31) @@ -34,6 +38,16 @@ struct pwm_lpss_chip { struct pwm_chip chip; void __iomem *regs; struct clk *clk; + unsigned long clk_rate; +}; + +struct pwm_lpss_boardinfo { + unsigned long clk_rate; +}; + +/* BayTrail */ +static const struct pwm_lpss_boardinfo byt_info = { + 25000000 }; static inline struct pwm_lpss_chip *to_lpwm(struct pwm_chip *chip) @@ -55,7 +69,7 @@ static int pwm_lpss_config(struct pwm_chip *chip, struct pwm_device *pwm, /* The equation is: base_unit = ((freq / c) * 65536) + correction */ base_unit = freq * 65536; - c = clk_get_rate(lpwm->clk); + c = lpwm->clk_rate; if (!c) return -EINVAL; @@ -113,52 +127,48 @@ static const struct pwm_ops pwm_lpss_ops = { .owner = THIS_MODULE, }; -static const struct acpi_device_id pwm_lpss_acpi_match[] = { - { "80860F09", 0 }, - { }, -}; -MODULE_DEVICE_TABLE(acpi, pwm_lpss_acpi_match); - -static int pwm_lpss_probe(struct platform_device *pdev) +static struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, + struct resource *r, + const struct pwm_lpss_boardinfo *info) { struct pwm_lpss_chip *lpwm; - struct resource *r; int ret; - lpwm = devm_kzalloc(&pdev->dev, sizeof(*lpwm), GFP_KERNEL); + lpwm = devm_kzalloc(dev, sizeof(*lpwm), GFP_KERNEL); if (!lpwm) - return -ENOMEM; - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + return ERR_PTR(-ENOMEM); - lpwm->regs = devm_ioremap_resource(&pdev->dev, r); + lpwm->regs = devm_ioremap_resource(dev, r); if (IS_ERR(lpwm->regs)) - return PTR_ERR(lpwm->regs); - - lpwm->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(lpwm->clk)) { - dev_err(&pdev->dev, "failed to get PWM clock\n"); - return PTR_ERR(lpwm->clk); + return ERR_CAST(lpwm->regs); + + if (info) { + lpwm->clk_rate = info->clk_rate; + } else { + lpwm->clk = devm_clk_get(dev, NULL); + if (IS_ERR(lpwm->clk)) { + dev_err(dev, "failed to get PWM clock\n"); + return ERR_CAST(lpwm->clk); + } + lpwm->clk_rate = clk_get_rate(lpwm->clk); } - lpwm->chip.dev = &pdev->dev; + lpwm->chip.dev = dev; lpwm->chip.ops = &pwm_lpss_ops; lpwm->chip.base = -1; lpwm->chip.npwm = 1; ret = pwmchip_add(&lpwm->chip); if (ret) { - dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret); - return ret; + dev_err(dev, "failed to add PWM chip: %d\n", ret); + return ERR_PTR(ret); } - platform_set_drvdata(pdev, lpwm); - return 0; + return lpwm; } -static int pwm_lpss_remove(struct platform_device *pdev) +static int pwm_lpss_remove(struct pwm_lpss_chip *lpwm) { - struct pwm_lpss_chip *lpwm = platform_get_drvdata(pdev); u32 ctrl; ctrl = readl(lpwm->regs + PWM); @@ -167,15 +177,104 @@ static int pwm_lpss_remove(struct platform_device *pdev) return pwmchip_remove(&lpwm->chip); } -static struct platform_driver pwm_lpss_driver = { +static int pwm_lpss_probe_pci(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + const struct pwm_lpss_boardinfo *info; + struct pwm_lpss_chip *lpwm; + int err; + + err = pci_enable_device(pdev); + if (err < 0) + return err; + + info = (struct pwm_lpss_boardinfo *)id->driver_data; + lpwm = pwm_lpss_probe(&pdev->dev, &pdev->resource[0], info); + if (IS_ERR(lpwm)) + return PTR_ERR(lpwm); + + pci_set_drvdata(pdev, lpwm); + return 0; +} + +static void pwm_lpss_remove_pci(struct pci_dev *pdev) +{ + struct pwm_lpss_chip *lpwm = pci_get_drvdata(pdev); + + pwm_lpss_remove(lpwm); + pci_disable_device(pdev); +} + +static struct pci_device_id pwm_lpss_pci_ids[] = { + { PCI_VDEVICE(INTEL, 0x0f08), (unsigned long)&byt_info}, + { PCI_VDEVICE(INTEL, 0x0f09), (unsigned long)&byt_info}, + { }, +}; +MODULE_DEVICE_TABLE(pci, pwm_lpss_pci_ids); + +static struct pci_driver pwm_lpss_driver_pci = { + .name = "pwm-lpss", + .id_table = pwm_lpss_pci_ids, + .probe = pwm_lpss_probe_pci, + .remove = pwm_lpss_remove_pci, +}; + +static int pwm_lpss_probe_platform(struct platform_device *pdev) +{ + struct pwm_lpss_chip *lpwm; + struct resource *r; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + lpwm = pwm_lpss_probe(&pdev->dev, r, NULL); + if (IS_ERR(lpwm)) + return PTR_ERR(lpwm); + + platform_set_drvdata(pdev, lpwm); + return 0; +} + +static int pwm_lpss_remove_platform(struct platform_device *pdev) +{ + struct pwm_lpss_chip *lpwm = platform_get_drvdata(pdev); + + return pwm_lpss_remove(lpwm); +} + +static const struct acpi_device_id pwm_lpss_acpi_match[] = { + { "80860F09", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, pwm_lpss_acpi_match); + +static struct platform_driver pwm_lpss_driver_platform = { .driver = { .name = "pwm-lpss", .acpi_match_table = pwm_lpss_acpi_match, }, - .probe = pwm_lpss_probe, - .remove = pwm_lpss_remove, + .probe = pwm_lpss_probe_platform, + .remove = pwm_lpss_remove_platform, }; -module_platform_driver(pwm_lpss_driver); + +static int __init pwm_init(void) +{ + pci_drv = pci_register_driver(&pwm_lpss_driver_pci); + plat_drv = platform_driver_register(&pwm_lpss_driver_platform); + if (pci_drv && plat_drv) + return pci_drv; + + return 0; +} +module_init(pwm_init); + +static void __exit pwm_exit(void) +{ + if (!pci_drv) + pci_unregister_driver(&pwm_lpss_driver_pci); + if (!plat_drv) + platform_driver_unregister(&pwm_lpss_driver_platform); +} +module_exit(pwm_exit); MODULE_DESCRIPTION("PWM driver for Intel LPSS"); MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>"); diff --git a/drivers/pwm/pwm-mxs.c b/drivers/pwm/pwm-mxs.c index 9475bc7a6f97..4f1bb4e0a426 100644 --- a/drivers/pwm/pwm-mxs.c +++ b/drivers/pwm/pwm-mxs.c @@ -147,6 +147,7 @@ static int mxs_pwm_probe(struct platform_device *pdev) mxs->chip.dev = &pdev->dev; mxs->chip.ops = &mxs_pwm_ops; mxs->chip.base = -1; + mxs->chip.can_sleep = true; ret = of_property_read_u32(np, "fsl,pwm-number", &mxs->chip.npwm); if (ret < 0) { dev_err(&pdev->dev, "failed to get pwm number: %d\n", ret); diff --git a/drivers/pwm/pwm-pxa.c b/drivers/pwm/pwm-pxa.c index cd356d870244..0b312ec420b6 100644 --- a/drivers/pwm/pwm-pxa.c +++ b/drivers/pwm/pwm-pxa.c @@ -179,10 +179,8 @@ static int pwm_probe(struct platform_device *pdev) return -EINVAL; pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL); - if (pwm == NULL) { - dev_err(&pdev->dev, "failed to allocate memory\n"); + if (pwm == NULL) return -ENOMEM; - } pwm->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(pwm->clk)) diff --git a/drivers/pwm/pwm-renesas-tpu.c b/drivers/pwm/pwm-renesas-tpu.c index aff6ba9b49e7..3b71b42e89d5 100644 --- a/drivers/pwm/pwm-renesas-tpu.c +++ b/drivers/pwm/pwm-renesas-tpu.c @@ -21,13 +21,14 @@ #include <linux/module.h> #include <linux/mutex.h> #include <linux/of.h> -#include <linux/platform_data/pwm-renesas-tpu.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/pwm.h> #include <linux/slab.h> #include <linux/spinlock.h> +#define TPU_CHANNEL_MAX 4 + #define TPU_TSTR 0x00 /* Timer start register (shared) */ #define TPU_TCRn 0x00 /* Timer control register */ @@ -87,7 +88,6 @@ struct tpu_pwm_device { struct tpu_device { struct platform_device *pdev; - enum pwm_polarity polarities[TPU_CHANNEL_MAX]; struct pwm_chip chip; spinlock_t lock; @@ -229,7 +229,7 @@ static int tpu_pwm_request(struct pwm_chip *chip, struct pwm_device *_pwm) pwm->tpu = tpu; pwm->channel = _pwm->hwpwm; - pwm->polarity = tpu->polarities[pwm->channel]; + pwm->polarity = PWM_POLARITY_NORMAL; pwm->prescaler = 0; pwm->period = 0; pwm->duty = 0; @@ -388,16 +388,6 @@ static const struct pwm_ops tpu_pwm_ops = { * Probe and remove */ -static void tpu_parse_pdata(struct tpu_device *tpu) -{ - struct tpu_pwm_platform_data *pdata = tpu->pdev->dev.platform_data; - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(tpu->polarities); ++i) - tpu->polarities[i] = pdata ? pdata->channels[i].polarity - : PWM_POLARITY_NORMAL; -} - static int tpu_probe(struct platform_device *pdev) { struct tpu_device *tpu; @@ -405,17 +395,12 @@ static int tpu_probe(struct platform_device *pdev) int ret; tpu = devm_kzalloc(&pdev->dev, sizeof(*tpu), GFP_KERNEL); - if (tpu == NULL) { - dev_err(&pdev->dev, "failed to allocate driver data\n"); + if (tpu == NULL) return -ENOMEM; - } spin_lock_init(&tpu->lock); tpu->pdev = pdev; - /* Initialize device configuration from platform data. */ - tpu_parse_pdata(tpu); - /* Map memory, get clock and pin control. */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); tpu->base = devm_ioremap_resource(&pdev->dev, res); diff --git a/drivers/pwm/pwm-samsung.c b/drivers/pwm/pwm-samsung.c index d66529a995a1..ba6b650cf8dc 100644 --- a/drivers/pwm/pwm-samsung.c +++ b/drivers/pwm/pwm-samsung.c @@ -335,9 +335,6 @@ static int pwm_samsung_config(struct pwm_chip *chip, struct pwm_device *pwm, writel(tcnt, our_chip->base + REG_TCNTB(pwm->hwpwm)); writel(tcmp, our_chip->base + REG_TCMPB(pwm->hwpwm)); - if (test_bit(PWMF_ENABLED, &pwm->flags)) - pwm_samsung_enable(chip, pwm); - chan->period_ns = period_ns; chan->tin_ns = tin_ns; chan->duty_ns = duty_ns; diff --git a/drivers/pwm/pwm-spear.c b/drivers/pwm/pwm-spear.c index cb2d4f0f9711..6fd93e6a4122 100644 --- a/drivers/pwm/pwm-spear.c +++ b/drivers/pwm/pwm-spear.c @@ -179,10 +179,8 @@ static int spear_pwm_probe(struct platform_device *pdev) u32 val; pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL); - if (!pc) { - dev_err(&pdev->dev, "failed to allocate memory\n"); + if (!pc) return -ENOMEM; - } r = platform_get_resource(pdev, IORESOURCE_MEM, 0); pc->mmio_base = devm_ioremap_resource(&pdev->dev, r); @@ -222,7 +220,7 @@ static int spear_pwm_probe(struct platform_device *pdev) } ret = pwmchip_add(&pc->chip); - if (!ret) { + if (ret < 0) { clk_unprepare(pc->clk); dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); } diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c index 74298c561c4e..61d86b9498ca 100644 --- a/drivers/pwm/pwm-tegra.c +++ b/drivers/pwm/pwm-tegra.c @@ -173,10 +173,8 @@ static int tegra_pwm_probe(struct platform_device *pdev) int ret; pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL); - if (!pwm) { - dev_err(&pdev->dev, "failed to allocate memory\n"); + if (!pwm) return -ENOMEM; - } pwm->dev = &pdev->dev; diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c index 032092c7a6ae..74efbe7f20c3 100644 --- a/drivers/pwm/pwm-tiecap.c +++ b/drivers/pwm/pwm-tiecap.c @@ -209,10 +209,8 @@ static int ecap_pwm_probe(struct platform_device *pdev) u16 status; pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL); - if (!pc) { - dev_err(&pdev->dev, "failed to allocate memory\n"); + if (!pc) return -ENOMEM; - } clk = devm_clk_get(&pdev->dev, "fck"); if (IS_ERR(clk)) { diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c index aee4471424d1..cb75133085a8 100644 --- a/drivers/pwm/pwm-tiehrpwm.c +++ b/drivers/pwm/pwm-tiehrpwm.c @@ -138,12 +138,12 @@ static inline struct ehrpwm_pwm_chip *to_ehrpwm_pwm_chip(struct pwm_chip *chip) return container_of(chip, struct ehrpwm_pwm_chip, chip); } -static u16 ehrpwm_read(void __iomem *base, int offset) +static inline u16 ehrpwm_read(void __iomem *base, int offset) { return readw(base + offset); } -static void ehrpwm_write(void __iomem *base, int offset, unsigned int val) +static inline void ehrpwm_write(void __iomem *base, int offset, unsigned int val) { writew(val & 0xFFFF, base + offset); } @@ -440,10 +440,8 @@ static int ehrpwm_pwm_probe(struct platform_device *pdev) u16 status; pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL); - if (!pc) { - dev_err(&pdev->dev, "failed to allocate memory\n"); + if (!pc) return -ENOMEM; - } clk = devm_clk_get(&pdev->dev, "fck"); if (IS_ERR(clk)) { @@ -531,6 +529,7 @@ static int ehrpwm_pwm_remove(struct platform_device *pdev) return pwmchip_remove(&pc->chip); } +#ifdef CONFIG_PM_SLEEP static void ehrpwm_pwm_save_context(struct ehrpwm_pwm_chip *pc) { pm_runtime_get_sync(pc->chip.dev); @@ -557,7 +556,6 @@ static void ehrpwm_pwm_restore_context(struct ehrpwm_pwm_chip *pc) ehrpwm_write(pc->mmio_base, TBCTL, pc->ctx.tbctl); } -#ifdef CONFIG_PM_SLEEP static int ehrpwm_pwm_suspend(struct device *dev) { struct ehrpwm_pwm_chip *pc = dev_get_drvdata(dev); diff --git a/drivers/pwm/pwm-twl.c b/drivers/pwm/pwm-twl.c index b99a50e626a6..04f76725d591 100644 --- a/drivers/pwm/pwm-twl.c +++ b/drivers/pwm/pwm-twl.c @@ -265,14 +265,6 @@ static void twl6030_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG); if (ret < 0) { - dev_err(chip->dev, "%s: Failed to read TOGGLE3\n", pwm->label); - goto out; - } - - val |= TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXS | TWL6030_PWMXEN); - - ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG); - if (ret < 0) { dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label); goto out; } diff --git a/drivers/pwm/pwm-vt8500.c b/drivers/pwm/pwm-vt8500.c index 323125abf3f4..652e6b5b859b 100644 --- a/drivers/pwm/pwm-vt8500.c +++ b/drivers/pwm/pwm-vt8500.c @@ -211,10 +211,8 @@ static int vt8500_pwm_probe(struct platform_device *pdev) } chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); - if (chip == NULL) { - dev_err(&pdev->dev, "failed to allocate memory\n"); + if (chip == NULL) return -ENOMEM; - } chip->chip.dev = &pdev->dev; chip->chip.ops = &vt8500_pwm_ops; diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index b75201ff46f6..38ca88bc5c3e 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -10,8 +10,8 @@ * published by the Free Software Foundation. */ +#include <linux/gpio/consumer.h> #include <linux/gpio.h> -#include <linux/of_gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -32,8 +32,7 @@ struct pwm_bl_data { unsigned int *levels; bool enabled; struct regulator *power_supply; - int enable_gpio; - unsigned long enable_gpio_flags; + struct gpio_desc *enable_gpio; unsigned int scale; int (*notify)(struct device *, int brightness); @@ -54,12 +53,8 @@ static void pwm_backlight_power_on(struct pwm_bl_data *pb, int brightness) if (err < 0) dev_err(pb->dev, "failed to enable power supply\n"); - if (gpio_is_valid(pb->enable_gpio)) { - if (pb->enable_gpio_flags & PWM_BACKLIGHT_GPIO_ACTIVE_LOW) - gpio_set_value(pb->enable_gpio, 0); - else - gpio_set_value(pb->enable_gpio, 1); - } + if (pb->enable_gpio) + gpiod_set_value(pb->enable_gpio, 1); pwm_enable(pb->pwm); pb->enabled = true; @@ -73,12 +68,8 @@ static void pwm_backlight_power_off(struct pwm_bl_data *pb) pwm_config(pb->pwm, 0, pb->period); pwm_disable(pb->pwm); - if (gpio_is_valid(pb->enable_gpio)) { - if (pb->enable_gpio_flags & PWM_BACKLIGHT_GPIO_ACTIVE_LOW) - gpio_set_value(pb->enable_gpio, 1); - else - gpio_set_value(pb->enable_gpio, 0); - } + if (pb->enable_gpio) + gpiod_set_value(pb->enable_gpio, 0); regulator_disable(pb->power_supply); pb->enabled = false; @@ -148,7 +139,6 @@ static int pwm_backlight_parse_dt(struct device *dev, struct platform_pwm_backlight_data *data) { struct device_node *node = dev->of_node; - enum of_gpio_flags flags; struct property *prop; int length; u32 value; @@ -189,14 +179,6 @@ static int pwm_backlight_parse_dt(struct device *dev, data->max_brightness--; } - data->enable_gpio = of_get_named_gpio_flags(node, "enable-gpios", 0, - &flags); - if (data->enable_gpio == -EPROBE_DEFER) - return -EPROBE_DEFER; - - if (gpio_is_valid(data->enable_gpio) && (flags & OF_GPIO_ACTIVE_LOW)) - data->enable_gpio_flags |= PWM_BACKLIGHT_GPIO_ACTIVE_LOW; - return 0; } @@ -256,8 +238,6 @@ static int pwm_backlight_probe(struct platform_device *pdev) } else pb->scale = data->max_brightness; - pb->enable_gpio = data->enable_gpio; - pb->enable_gpio_flags = data->enable_gpio_flags; pb->notify = data->notify; pb->notify_after = data->notify_after; pb->check_fb = data->check_fb; @@ -265,26 +245,38 @@ static int pwm_backlight_probe(struct platform_device *pdev) pb->dev = &pdev->dev; pb->enabled = false; - if (gpio_is_valid(pb->enable_gpio)) { - unsigned long flags; - - if (pb->enable_gpio_flags & PWM_BACKLIGHT_GPIO_ACTIVE_LOW) - flags = GPIOF_OUT_INIT_HIGH; + pb->enable_gpio = devm_gpiod_get(&pdev->dev, "enable"); + if (IS_ERR(pb->enable_gpio)) { + ret = PTR_ERR(pb->enable_gpio); + if (ret == -ENOENT) + pb->enable_gpio = NULL; else - flags = GPIOF_OUT_INIT_LOW; + goto err_alloc; + } - ret = gpio_request_one(pb->enable_gpio, flags, "enable"); + /* + * Compatibility fallback for drivers still using the integer GPIO + * platform data. Must go away soon. + */ + if (!pb->enable_gpio && gpio_is_valid(data->enable_gpio)) { + ret = devm_gpio_request_one(&pdev->dev, data->enable_gpio, + GPIOF_OUT_INIT_HIGH, "enable"); if (ret < 0) { dev_err(&pdev->dev, "failed to request GPIO#%d: %d\n", - pb->enable_gpio, ret); + data->enable_gpio, ret); goto err_alloc; } + + pb->enable_gpio = gpio_to_desc(data->enable_gpio); } + if (pb->enable_gpio) + gpiod_direction_output(pb->enable_gpio, 1); + pb->power_supply = devm_regulator_get(&pdev->dev, "power"); if (IS_ERR(pb->power_supply)) { ret = PTR_ERR(pb->power_supply); - goto err_gpio; + goto err_alloc; } pb->pwm = devm_pwm_get(&pdev->dev, NULL); @@ -295,7 +287,7 @@ static int pwm_backlight_probe(struct platform_device *pdev) if (IS_ERR(pb->pwm)) { dev_err(&pdev->dev, "unable to request legacy PWM\n"); ret = PTR_ERR(pb->pwm); - goto err_gpio; + goto err_alloc; } } @@ -304,12 +296,15 @@ static int pwm_backlight_probe(struct platform_device *pdev) /* * The DT case will set the pwm_period_ns field to 0 and store the * period, parsed from the DT, in the PWM device. For the non-DT case, - * set the period from platform data. + * set the period from platform data if it has not already been set + * via the PWM lookup table. */ - if (data->pwm_period_ns > 0) + pb->period = pwm_get_period(pb->pwm); + if (!pb->period && (data->pwm_period_ns > 0)) { + pb->period = data->pwm_period_ns; pwm_set_period(pb->pwm, data->pwm_period_ns); + } - pb->period = pwm_get_period(pb->pwm); pb->lth_brightness = data->lth_brightness * (pb->period / pb->scale); memset(&props, 0, sizeof(struct backlight_properties)); @@ -320,7 +315,7 @@ static int pwm_backlight_probe(struct platform_device *pdev) if (IS_ERR(bl)) { dev_err(&pdev->dev, "failed to register backlight\n"); ret = PTR_ERR(bl); - goto err_gpio; + goto err_alloc; } if (data->dft_brightness > data->max_brightness) { @@ -336,9 +331,6 @@ static int pwm_backlight_probe(struct platform_device *pdev) platform_set_drvdata(pdev, bl); return 0; -err_gpio: - if (gpio_is_valid(pb->enable_gpio)) - gpio_free(pb->enable_gpio); err_alloc: if (data->exit) data->exit(&pdev->dev); @@ -359,6 +351,14 @@ static int pwm_backlight_remove(struct platform_device *pdev) return 0; } +static void pwm_backlight_shutdown(struct platform_device *pdev) +{ + struct backlight_device *bl = platform_get_drvdata(pdev); + struct pwm_bl_data *pb = bl_get_data(bl); + + pwm_backlight_power_off(pb); +} + #ifdef CONFIG_PM_SLEEP static int pwm_backlight_suspend(struct device *dev) { @@ -404,6 +404,7 @@ static struct platform_driver pwm_backlight_driver = { }, .probe = pwm_backlight_probe, .remove = pwm_backlight_remove, + .shutdown = pwm_backlight_shutdown, }; module_platform_driver(pwm_backlight_driver); diff --git a/include/linux/platform_data/pwm-renesas-tpu.h b/include/linux/platform_data/pwm-renesas-tpu.h deleted file mode 100644 index a7220b10ddab..000000000000 --- a/include/linux/platform_data/pwm-renesas-tpu.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __PWM_RENESAS_TPU_H__ -#define __PWM_RENESAS_TPU_H__ - -#include <linux/pwm.h> - -#define TPU_CHANNEL_MAX 4 - -struct tpu_pwm_channel_data { - enum pwm_polarity polarity; -}; - -struct tpu_pwm_platform_data { - struct tpu_pwm_channel_data channels[TPU_CHANNEL_MAX]; -}; - -#endif /* __PWM_RENESAS_TPU_H__ */ diff --git a/include/linux/pwm.h b/include/linux/pwm.h index 4717f54051cb..e90628cac8fa 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -274,14 +274,18 @@ struct pwm_lookup { unsigned int index; const char *dev_id; const char *con_id; + unsigned int period; + enum pwm_polarity polarity; }; -#define PWM_LOOKUP(_provider, _index, _dev_id, _con_id) \ +#define PWM_LOOKUP(_provider, _index, _dev_id, _con_id, _period, _polarity) \ { \ .provider = _provider, \ .index = _index, \ .dev_id = _dev_id, \ .con_id = _con_id, \ + .period = _period, \ + .polarity = _polarity \ } #if IS_ENABLED(CONFIG_PWM) diff --git a/include/linux/pwm_backlight.h b/include/linux/pwm_backlight.h index 2de2e275b2cb..efdd9227a49c 100644 --- a/include/linux/pwm_backlight.h +++ b/include/linux/pwm_backlight.h @@ -6,9 +6,6 @@ #include <linux/backlight.h> -/* TODO: convert to gpiod_*() API once it has been merged */ -#define PWM_BACKLIGHT_GPIO_ACTIVE_LOW (1 << 0) - struct platform_pwm_backlight_data { int pwm_id; unsigned int max_brightness; @@ -16,8 +13,8 @@ struct platform_pwm_backlight_data { unsigned int lth_brightness; unsigned int pwm_period_ns; unsigned int *levels; + /* TODO remove once all users are switched to gpiod_* API */ int enable_gpio; - unsigned long enable_gpio_flags; int (*init)(struct device *dev); int (*notify)(struct device *dev, int brightness); void (*notify_after)(struct device *dev, int brightness); |