diff options
-rw-r--r-- | drivers/net/phy/Kconfig | 5 | ||||
-rw-r--r-- | drivers/net/phy/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/phy/sfp.c | 915 |
3 files changed, 921 insertions, 0 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index a0a9e03e2f80..bf73969a9d2b 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -200,6 +200,11 @@ config LED_TRIGGER_PHY comment "MII PHY device drivers" +config SFP + tristate "SFP cage support" + depends on I2C && PHYLINK + select MDIO_I2C + config AMD_PHY tristate "AMD PHYs" ---help--- diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 4c16a10f420e..7237255bad68 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o +obj-$(CONFIG_SFP) += sfp.o sfp-obj-$(CONFIG_SFP) += sfp-bus.o obj-y += $(sfp-obj-y) $(sfp-obj-m) diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c new file mode 100644 index 000000000000..fb2cf4342f48 --- /dev/null +++ b/drivers/net/phy/sfp.c @@ -0,0 +1,915 @@ +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/jiffies.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/phy.h> +#include <linux/platform_device.h> +#include <linux/rtnetlink.h> +#include <linux/slab.h> +#include <linux/workqueue.h> + +#include "mdio-i2c.h" +#include "sfp.h" +#include "swphy.h" + +enum { + GPIO_MODDEF0, + GPIO_LOS, + GPIO_TX_FAULT, + GPIO_TX_DISABLE, + GPIO_RATE_SELECT, + GPIO_MAX, + + SFP_F_PRESENT = BIT(GPIO_MODDEF0), + SFP_F_LOS = BIT(GPIO_LOS), + SFP_F_TX_FAULT = BIT(GPIO_TX_FAULT), + SFP_F_TX_DISABLE = BIT(GPIO_TX_DISABLE), + SFP_F_RATE_SELECT = BIT(GPIO_RATE_SELECT), + + SFP_E_INSERT = 0, + SFP_E_REMOVE, + SFP_E_DEV_DOWN, + SFP_E_DEV_UP, + SFP_E_TX_FAULT, + SFP_E_TX_CLEAR, + SFP_E_LOS_HIGH, + SFP_E_LOS_LOW, + SFP_E_TIMEOUT, + + SFP_MOD_EMPTY = 0, + SFP_MOD_PROBE, + SFP_MOD_PRESENT, + SFP_MOD_ERROR, + + SFP_DEV_DOWN = 0, + SFP_DEV_UP, + + SFP_S_DOWN = 0, + SFP_S_INIT, + SFP_S_WAIT_LOS, + SFP_S_LINK_UP, + SFP_S_TX_FAULT, + SFP_S_REINIT, + SFP_S_TX_DISABLE, +}; + +static const char *gpio_of_names[] = { + "moddef0", + "los", + "tx-fault", + "tx-disable", + "rate-select", +}; + +static const enum gpiod_flags gpio_flags[] = { + GPIOD_IN, + GPIOD_IN, + GPIOD_IN, + GPIOD_ASIS, + GPIOD_ASIS, +}; + +#define T_INIT_JIFFIES msecs_to_jiffies(300) +#define T_RESET_US 10 +#define T_FAULT_RECOVER msecs_to_jiffies(1000) + +/* SFP module presence detection is poor: the three MOD DEF signals are + * the same length on the PCB, which means it's possible for MOD DEF 0 to + * connect before the I2C bus on MOD DEF 1/2. + * + * The SFP MSA specifies 300ms as t_init (the time taken for TX_FAULT to + * be deasserted) but makes no mention of the earliest time before we can + * access the I2C EEPROM. However, Avago modules require 300ms. + */ +#define T_PROBE_INIT msecs_to_jiffies(300) +#define T_PROBE_RETRY msecs_to_jiffies(100) + +/* + * SFP modules appear to always have their PHY configured for bus address + * 0x56 (which with mdio-i2c, translates to a PHY address of 22). + */ +#define SFP_PHY_ADDR 22 + +/* + * Give this long for the PHY to reset. + */ +#define T_PHY_RESET_MS 50 + +static DEFINE_MUTEX(sfp_mutex); + +struct sfp { + struct device *dev; + struct i2c_adapter *i2c; + struct mii_bus *i2c_mii; + struct sfp_bus *sfp_bus; + struct phy_device *mod_phy; + + unsigned int (*get_state)(struct sfp *); + void (*set_state)(struct sfp *, unsigned int); + int (*read)(struct sfp *, bool, u8, void *, size_t); + + struct gpio_desc *gpio[GPIO_MAX]; + + unsigned int state; + struct delayed_work poll; + struct delayed_work timeout; + struct mutex sm_mutex; + unsigned char sm_mod_state; + unsigned char sm_dev_state; + unsigned short sm_state; + unsigned int sm_retries; + + struct sfp_eeprom_id id; +}; + +static unsigned long poll_jiffies; + +static unsigned int sfp_gpio_get_state(struct sfp *sfp) +{ + unsigned int i, state, v; + + for (i = state = 0; i < GPIO_MAX; i++) { + if (gpio_flags[i] != GPIOD_IN || !sfp->gpio[i]) + continue; + + v = gpiod_get_value_cansleep(sfp->gpio[i]); + if (v) + state |= BIT(i); + } + + return state; +} + +static void sfp_gpio_set_state(struct sfp *sfp, unsigned int state) +{ + if (state & SFP_F_PRESENT) { + /* If the module is present, drive the signals */ + if (sfp->gpio[GPIO_TX_DISABLE]) + gpiod_direction_output(sfp->gpio[GPIO_TX_DISABLE], + state & SFP_F_TX_DISABLE); + if (state & SFP_F_RATE_SELECT) + gpiod_direction_output(sfp->gpio[GPIO_RATE_SELECT], + state & SFP_F_RATE_SELECT); + } else { + /* Otherwise, let them float to the pull-ups */ + if (sfp->gpio[GPIO_TX_DISABLE]) + gpiod_direction_input(sfp->gpio[GPIO_TX_DISABLE]); + if (state & SFP_F_RATE_SELECT) + gpiod_direction_input(sfp->gpio[GPIO_RATE_SELECT]); + } +} + +static int sfp__i2c_read(struct i2c_adapter *i2c, u8 bus_addr, u8 dev_addr, + void *buf, size_t len) +{ + struct i2c_msg msgs[2]; + int ret; + + msgs[0].addr = bus_addr; + msgs[0].flags = 0; + msgs[0].len = 1; + msgs[0].buf = &dev_addr; + msgs[1].addr = bus_addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = len; + msgs[1].buf = buf; + + ret = i2c_transfer(i2c, msgs, ARRAY_SIZE(msgs)); + if (ret < 0) + return ret; + + return ret == ARRAY_SIZE(msgs) ? len : 0; +} + +static int sfp_i2c_read(struct sfp *sfp, bool a2, u8 addr, void *buf, + size_t len) +{ + return sfp__i2c_read(sfp->i2c, a2 ? 0x51 : 0x50, addr, buf, len); +} + +static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c) +{ + struct mii_bus *i2c_mii; + int ret; + + if (!i2c_check_functionality(i2c, I2C_FUNC_I2C)) + return -EINVAL; + + sfp->i2c = i2c; + sfp->read = sfp_i2c_read; + + i2c_mii = mdio_i2c_alloc(sfp->dev, i2c); + if (IS_ERR(i2c_mii)) + return PTR_ERR(i2c_mii); + + i2c_mii->name = "SFP I2C Bus"; + i2c_mii->phy_mask = ~0; + + ret = mdiobus_register(i2c_mii); + if (ret < 0) { + mdiobus_free(i2c_mii); + return ret; + } + + sfp->i2c_mii = i2c_mii; + + return 0; +} + + +/* Interface */ +static unsigned int sfp_get_state(struct sfp *sfp) +{ + return sfp->get_state(sfp); +} + +static void sfp_set_state(struct sfp *sfp, unsigned int state) +{ + sfp->set_state(sfp, state); +} + +static int sfp_read(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len) +{ + return sfp->read(sfp, a2, addr, buf, len); +} + +static unsigned int sfp_check(void *buf, size_t len) +{ + u8 *p, check; + + for (p = buf, check = 0; len; p++, len--) + check += *p; + + return check; +} + +/* Helpers */ +static void sfp_module_tx_disable(struct sfp *sfp) +{ + dev_dbg(sfp->dev, "tx disable %u -> %u\n", + sfp->state & SFP_F_TX_DISABLE ? 1 : 0, 1); + sfp->state |= SFP_F_TX_DISABLE; + sfp_set_state(sfp, sfp->state); +} + +static void sfp_module_tx_enable(struct sfp *sfp) +{ + dev_dbg(sfp->dev, "tx disable %u -> %u\n", + sfp->state & SFP_F_TX_DISABLE ? 1 : 0, 0); + sfp->state &= ~SFP_F_TX_DISABLE; + sfp_set_state(sfp, sfp->state); +} + +static void sfp_module_tx_fault_reset(struct sfp *sfp) +{ + unsigned int state = sfp->state; + + if (state & SFP_F_TX_DISABLE) + return; + + sfp_set_state(sfp, state | SFP_F_TX_DISABLE); + + udelay(T_RESET_US); + + sfp_set_state(sfp, state); +} + +/* SFP state machine */ +static void sfp_sm_set_timer(struct sfp *sfp, unsigned int timeout) +{ + if (timeout) + mod_delayed_work(system_power_efficient_wq, &sfp->timeout, + timeout); + else + cancel_delayed_work(&sfp->timeout); +} + +static void sfp_sm_next(struct sfp *sfp, unsigned int state, + unsigned int timeout) +{ + sfp->sm_state = state; + sfp_sm_set_timer(sfp, timeout); +} + +static void sfp_sm_ins_next(struct sfp *sfp, unsigned int state, unsigned int timeout) +{ + sfp->sm_mod_state = state; + sfp_sm_set_timer(sfp, timeout); +} + +static void sfp_sm_phy_detach(struct sfp *sfp) +{ + phy_stop(sfp->mod_phy); + sfp_remove_phy(sfp->sfp_bus); + phy_device_remove(sfp->mod_phy); + phy_device_free(sfp->mod_phy); + sfp->mod_phy = NULL; +} + +static void sfp_sm_probe_phy(struct sfp *sfp) +{ + struct phy_device *phy; + int err; + + msleep(T_PHY_RESET_MS); + + phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR); + if (IS_ERR(phy)) { + dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy)); + return; + } + if (!phy) { + dev_info(sfp->dev, "no PHY detected\n"); + return; + } + + err = sfp_add_phy(sfp->sfp_bus, phy); + if (err) { + phy_device_remove(phy); + phy_device_free(phy); + dev_err(sfp->dev, "sfp_add_phy failed: %d\n", err); + return; + } + + sfp->mod_phy = phy; + phy_start(phy); +} + +static void sfp_sm_link_up(struct sfp *sfp) +{ + sfp_link_up(sfp->sfp_bus); + sfp_sm_next(sfp, SFP_S_LINK_UP, 0); +} + +static void sfp_sm_link_down(struct sfp *sfp) +{ + sfp_link_down(sfp->sfp_bus); +} + +static void sfp_sm_link_check_los(struct sfp *sfp) +{ + unsigned int los = sfp->state & SFP_F_LOS; + + /* FIXME: what if neither SFP_OPTIONS_LOS_INVERTED nor + * SFP_OPTIONS_LOS_NORMAL are set? For now, we assume + * the same as SFP_OPTIONS_LOS_NORMAL set. + */ + if (sfp->id.ext.options & SFP_OPTIONS_LOS_INVERTED) + los ^= SFP_F_LOS; + + if (los) + sfp_sm_next(sfp, SFP_S_WAIT_LOS, 0); + else + sfp_sm_link_up(sfp); +} + +static void sfp_sm_fault(struct sfp *sfp, bool warn) +{ + if (sfp->sm_retries && !--sfp->sm_retries) { + dev_err(sfp->dev, "module persistently indicates fault, disabling\n"); + sfp_sm_next(sfp, SFP_S_TX_DISABLE, 0); + } else { + if (warn) + dev_err(sfp->dev, "module transmit fault indicated\n"); + + sfp_sm_next(sfp, SFP_S_TX_FAULT, T_FAULT_RECOVER); + } +} + +static void sfp_sm_mod_init(struct sfp *sfp) +{ + sfp_module_tx_enable(sfp); + + /* Wait t_init before indicating that the link is up, provided the + * current state indicates no TX_FAULT. If TX_FAULT clears before + * this time, that's fine too. + */ + sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES); + sfp->sm_retries = 5; + + /* Setting the serdes link mode is guesswork: there's no + * field in the EEPROM which indicates what mode should + * be used. + * + * If it's a gigabit-only fiber module, it probably does + * not have a PHY, so switch to 802.3z negotiation mode. + * Otherwise, switch to SGMII mode (which is required to + * support non-gigabit speeds) and probe for a PHY. + */ + if (sfp->id.base.e1000_base_t || + sfp->id.base.e100_base_lx || + sfp->id.base.e100_base_fx) + sfp_sm_probe_phy(sfp); +} + +static int sfp_sm_mod_probe(struct sfp *sfp) +{ + /* SFP module inserted - read I2C data */ + struct sfp_eeprom_id id; + char vendor[17]; + char part[17]; + char sn[17]; + char date[9]; + char rev[5]; + u8 check; + int err; + + err = sfp_read(sfp, false, 0, &id, sizeof(id)); + if (err < 0) { + dev_err(sfp->dev, "failed to read EEPROM: %d\n", err); + return -EAGAIN; + } + + if (err != sizeof(id)) { + dev_err(sfp->dev, "EEPROM short read: %d\n", err); + return -EAGAIN; + } + + /* Validate the checksum over the base structure */ + check = sfp_check(&id.base, sizeof(id.base) - 1); + if (check != id.base.cc_base) { + dev_err(sfp->dev, + "EEPROM base structure checksum failure: 0x%02x\n", + check); + print_hex_dump(KERN_ERR, "sfp EE: ", DUMP_PREFIX_OFFSET, + 16, 1, &id, sizeof(id.base) - 1, true); + return -EINVAL; + } + + check = sfp_check(&id.ext, sizeof(id.ext) - 1); + if (check != id.ext.cc_ext) { + dev_err(sfp->dev, + "EEPROM extended structure checksum failure: 0x%02x\n", + check); + memset(&id.ext, 0, sizeof(id.ext)); + } + + sfp->id = id; + + memcpy(vendor, sfp->id.base.vendor_name, 16); + vendor[16] = '\0'; + memcpy(part, sfp->id.base.vendor_pn, 16); + part[16] = '\0'; + memcpy(rev, sfp->id.base.vendor_rev, 4); + rev[4] = '\0'; + memcpy(sn, sfp->id.ext.vendor_sn, 16); + sn[16] = '\0'; + memcpy(date, sfp->id.ext.datecode, 8); + date[8] = '\0'; + + dev_info(sfp->dev, "module %s %s rev %s sn %s dc %s\n", vendor, part, rev, sn, date); + + /* We only support SFP modules, not the legacy GBIC modules. */ + if (sfp->id.base.phys_id != SFP_PHYS_ID_SFP || + sfp->id.base.phys_ext_id != SFP_PHYS_EXT_ID_SFP) { + dev_err(sfp->dev, "module is not SFP - phys id 0x%02x 0x%02x\n", + sfp->id.base.phys_id, sfp->id.base.phys_ext_id); + return -EINVAL; + } + + return sfp_module_insert(sfp->sfp_bus, &sfp->id); +} + +static void sfp_sm_mod_remove(struct sfp *sfp) +{ + sfp_module_remove(sfp->sfp_bus); + + if (sfp->mod_phy) + sfp_sm_phy_detach(sfp); + + sfp_module_tx_disable(sfp); + + memset(&sfp->id, 0, sizeof(sfp->id)); + + dev_info(sfp->dev, "module removed\n"); +} + +static void sfp_sm_event(struct sfp *sfp, unsigned int event) +{ + mutex_lock(&sfp->sm_mutex); + + dev_dbg(sfp->dev, "SM: enter %u:%u:%u event %u\n", + sfp->sm_mod_state, sfp->sm_dev_state, sfp->sm_state, event); + + /* This state machine tracks the insert/remove state of + * the module, and handles probing the on-board EEPROM. + */ + switch (sfp->sm_mod_state) { + default: + if (event == SFP_E_INSERT) { + sfp_module_tx_disable(sfp); + sfp_sm_ins_next(sfp, SFP_MOD_PROBE, T_PROBE_INIT); + } + break; + + case SFP_MOD_PROBE: + if (event == SFP_E_REMOVE) { + sfp_sm_ins_next(sfp, SFP_MOD_EMPTY, 0); + } else if (event == SFP_E_TIMEOUT) { + int err = sfp_sm_mod_probe(sfp); + + if (err == 0) + sfp_sm_ins_next(sfp, SFP_MOD_PRESENT, 0); + else if (err == -EAGAIN) + sfp_sm_set_timer(sfp, T_PROBE_RETRY); + else + sfp_sm_ins_next(sfp, SFP_MOD_ERROR, 0); + } + break; + + case SFP_MOD_PRESENT: + case SFP_MOD_ERROR: + if (event == SFP_E_REMOVE) { + sfp_sm_mod_remove(sfp); + sfp_sm_ins_next(sfp, SFP_MOD_EMPTY, 0); + } + break; + } + + /* This state machine tracks the netdev up/down state */ + switch (sfp->sm_dev_state) { + default: + if (event == SFP_E_DEV_UP) + sfp->sm_dev_state = SFP_DEV_UP; + break; + + case SFP_DEV_UP: + if (event == SFP_E_DEV_DOWN) { + /* If the module has a PHY, avoid raising TX disable + * as this resets the PHY. Otherwise, raise it to + * turn the laser off. + */ + if (!sfp->mod_phy) + sfp_module_tx_disable(sfp); + sfp->sm_dev_state = SFP_DEV_DOWN; + } + break; + } + + /* Some events are global */ + if (sfp->sm_state != SFP_S_DOWN && + (sfp->sm_mod_state != SFP_MOD_PRESENT || + sfp->sm_dev_state != SFP_DEV_UP)) { + if (sfp->sm_state == SFP_S_LINK_UP && + sfp->sm_dev_state == SFP_DEV_UP) + sfp_sm_link_down(sfp); + if (sfp->mod_phy) + sfp_sm_phy_detach(sfp); + sfp_sm_next(sfp, SFP_S_DOWN, 0); + mutex_unlock(&sfp->sm_mutex); + return; + } + + /* The main state machine */ + switch (sfp->sm_state) { + case SFP_S_DOWN: + if (sfp->sm_mod_state == SFP_MOD_PRESENT && + sfp->sm_dev_state == SFP_DEV_UP) + sfp_sm_mod_init(sfp); + break; + + case SFP_S_INIT: + if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) + sfp_sm_fault(sfp, true); + else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) + sfp_sm_link_check_los(sfp); + break; + + case SFP_S_WAIT_LOS: + if (event == SFP_E_TX_FAULT) + sfp_sm_fault(sfp, true); + else if (event == + (sfp->id.ext.options & SFP_OPTIONS_LOS_INVERTED ? + SFP_E_LOS_HIGH : SFP_E_LOS_LOW)) + sfp_sm_link_up(sfp); + break; + + case SFP_S_LINK_UP: + if (event == SFP_E_TX_FAULT) { + sfp_sm_link_down(sfp); + sfp_sm_fault(sfp, true); + } else if (event == + (sfp->id.ext.options & SFP_OPTIONS_LOS_INVERTED ? + SFP_E_LOS_LOW : SFP_E_LOS_HIGH)) { + sfp_sm_link_down(sfp); + sfp_sm_next(sfp, SFP_S_WAIT_LOS, 0); + } + break; + + case SFP_S_TX_FAULT: + if (event == SFP_E_TIMEOUT) { + sfp_module_tx_fault_reset(sfp); + sfp_sm_next(sfp, SFP_S_REINIT, T_INIT_JIFFIES); + } + break; + + case SFP_S_REINIT: + if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) { + sfp_sm_fault(sfp, false); + } else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) { + dev_info(sfp->dev, "module transmit fault recovered\n"); + sfp_sm_link_check_los(sfp); + } + break; + + case SFP_S_TX_DISABLE: + break; + } + + dev_dbg(sfp->dev, "SM: exit %u:%u:%u\n", + sfp->sm_mod_state, sfp->sm_dev_state, sfp->sm_state); + + mutex_unlock(&sfp->sm_mutex); +} + +static void sfp_start(struct sfp *sfp) +{ + sfp_sm_event(sfp, SFP_E_DEV_UP); +} + +static void sfp_stop(struct sfp *sfp) +{ + sfp_sm_event(sfp, SFP_E_DEV_DOWN); +} + +static int sfp_module_info(struct sfp *sfp, struct ethtool_modinfo *modinfo) +{ + /* locking... and check module is present */ + + if (sfp->id.ext.sff8472_compliance) { + modinfo->type = ETH_MODULE_SFF_8472; + modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN; + } else { + modinfo->type = ETH_MODULE_SFF_8079; + modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN; + } + return 0; +} + +static int sfp_module_eeprom(struct sfp *sfp, struct ethtool_eeprom *ee, + u8 *data) +{ + unsigned int first, last, len; + int ret; + + if (ee->len == 0) + return -EINVAL; + + first = ee->offset; + last = ee->offset + ee->len; + if (first < ETH_MODULE_SFF_8079_LEN) { + len = min_t(unsigned int, last, ETH_MODULE_SFF_8079_LEN); + len -= first; + + ret = sfp->read(sfp, false, first, data, len); + if (ret < 0) + return ret; + + first += len; + data += len; + } + if (first >= ETH_MODULE_SFF_8079_LEN && + first < ETH_MODULE_SFF_8472_LEN) { + len = min_t(unsigned int, last, ETH_MODULE_SFF_8472_LEN); + len -= first; + first -= ETH_MODULE_SFF_8079_LEN; + + ret = sfp->read(sfp, true, first, data, len); + if (ret < 0) + return ret; + } + return 0; +} + +static const struct sfp_socket_ops sfp_module_ops = { + .start = sfp_start, + .stop = sfp_stop, + .module_info = sfp_module_info, + .module_eeprom = sfp_module_eeprom, +}; + +static void sfp_timeout(struct work_struct *work) +{ + struct sfp *sfp = container_of(work, struct sfp, timeout.work); + + rtnl_lock(); + sfp_sm_event(sfp, SFP_E_TIMEOUT); + rtnl_unlock(); +} + +static void sfp_check_state(struct sfp *sfp) +{ + unsigned int state, i, changed; + + state = sfp_get_state(sfp); + changed = state ^ sfp->state; + changed &= SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT; + + for (i = 0; i < GPIO_MAX; i++) + if (changed & BIT(i)) + dev_dbg(sfp->dev, "%s %u -> %u\n", gpio_of_names[i], + !!(sfp->state & BIT(i)), !!(state & BIT(i))); + + state |= sfp->state & (SFP_F_TX_DISABLE | SFP_F_RATE_SELECT); + sfp->state = state; + + rtnl_lock(); + if (changed & SFP_F_PRESENT) + sfp_sm_event(sfp, state & SFP_F_PRESENT ? + SFP_E_INSERT : SFP_E_REMOVE); + + if (changed & SFP_F_TX_FAULT) + sfp_sm_event(sfp, state & SFP_F_TX_FAULT ? + SFP_E_TX_FAULT : SFP_E_TX_CLEAR); + + if (changed & SFP_F_LOS) + sfp_sm_event(sfp, state & SFP_F_LOS ? + SFP_E_LOS_HIGH : SFP_E_LOS_LOW); + rtnl_unlock(); +} + +static irqreturn_t sfp_irq(int irq, void *data) +{ + struct sfp *sfp = data; + + sfp_check_state(sfp); + + return IRQ_HANDLED; +} + +static void sfp_poll(struct work_struct *work) +{ + struct sfp *sfp = container_of(work, struct sfp, poll.work); + + sfp_check_state(sfp); + mod_delayed_work(system_wq, &sfp->poll, poll_jiffies); +} + +static struct sfp *sfp_alloc(struct device *dev) +{ + struct sfp *sfp; + + sfp = kzalloc(sizeof(*sfp), GFP_KERNEL); + if (!sfp) + return ERR_PTR(-ENOMEM); + + sfp->dev = dev; + + mutex_init(&sfp->sm_mutex); + INIT_DELAYED_WORK(&sfp->poll, sfp_poll); + INIT_DELAYED_WORK(&sfp->timeout, sfp_timeout); + + return sfp; +} + +static void sfp_cleanup(void *data) +{ + struct sfp *sfp = data; + + cancel_delayed_work_sync(&sfp->poll); + cancel_delayed_work_sync(&sfp->timeout); + if (sfp->i2c_mii) { + mdiobus_unregister(sfp->i2c_mii); + mdiobus_free(sfp->i2c_mii); + } + if (sfp->i2c) + i2c_put_adapter(sfp->i2c); + kfree(sfp); +} + +static int sfp_probe(struct platform_device *pdev) +{ + struct sfp *sfp; + bool poll = false; + int irq, err, i; + + sfp = sfp_alloc(&pdev->dev); + if (IS_ERR(sfp)) + return PTR_ERR(sfp); + + platform_set_drvdata(pdev, sfp); + + err = devm_add_action(sfp->dev, sfp_cleanup, sfp); + if (err < 0) + return err; + + if (pdev->dev.of_node) { + struct device_node *node = pdev->dev.of_node; + struct device_node *np; + + np = of_parse_phandle(node, "i2c-bus", 0); + if (np) { + struct i2c_adapter *i2c; + + i2c = of_find_i2c_adapter_by_node(np); + of_node_put(np); + if (!i2c) + return -EPROBE_DEFER; + + err = sfp_i2c_configure(sfp, i2c); + if (err < 0) { + i2c_put_adapter(i2c); + return err; + } + } + + for (i = 0; i < GPIO_MAX; i++) { + sfp->gpio[i] = devm_gpiod_get_optional(sfp->dev, + gpio_of_names[i], gpio_flags[i]); + if (IS_ERR(sfp->gpio[i])) + return PTR_ERR(sfp->gpio[i]); + } + + sfp->get_state = sfp_gpio_get_state; + sfp->set_state = sfp_gpio_set_state; + } + + sfp->sfp_bus = sfp_register_socket(sfp->dev, sfp, &sfp_module_ops); + if (!sfp->sfp_bus) + return -ENOMEM; + + /* Get the initial state, and always signal TX disable, + * since the network interface will not be up. + */ + sfp->state = sfp_get_state(sfp) | SFP_F_TX_DISABLE; + + if (sfp->gpio[GPIO_RATE_SELECT] && + gpiod_get_value_cansleep(sfp->gpio[GPIO_RATE_SELECT])) + sfp->state |= SFP_F_RATE_SELECT; + sfp_set_state(sfp, sfp->state); + sfp_module_tx_disable(sfp); + rtnl_lock(); + if (sfp->state & SFP_F_PRESENT) + sfp_sm_event(sfp, SFP_E_INSERT); + rtnl_unlock(); + + for (i = 0; i < GPIO_MAX; i++) { + if (gpio_flags[i] != GPIOD_IN || !sfp->gpio[i]) + continue; + + irq = gpiod_to_irq(sfp->gpio[i]); + if (!irq) { + poll = true; + continue; + } + + err = devm_request_threaded_irq(sfp->dev, irq, NULL, sfp_irq, + IRQF_ONESHOT | + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, + dev_name(sfp->dev), sfp); + if (err) + poll = true; + } + + if (poll) + mod_delayed_work(system_wq, &sfp->poll, poll_jiffies); + + return 0; +} + +static int sfp_remove(struct platform_device *pdev) +{ + struct sfp *sfp = platform_get_drvdata(pdev); + + sfp_unregister_socket(sfp->sfp_bus); + + return 0; +} + +static const struct of_device_id sfp_of_match[] = { + { .compatible = "sff,sfp", }, + { }, +}; +MODULE_DEVICE_TABLE(of, sfp_of_match); + +static struct platform_driver sfp_driver = { + .probe = sfp_probe, + .remove = sfp_remove, + .driver = { + .name = "sfp", + .of_match_table = sfp_of_match, + }, +}; + +static int sfp_init(void) +{ + poll_jiffies = msecs_to_jiffies(100); + + return platform_driver_register(&sfp_driver); +} +module_init(sfp_init); + +static void sfp_exit(void) +{ + platform_driver_unregister(&sfp_driver); +} +module_exit(sfp_exit); + +MODULE_ALIAS("platform:sfp"); +MODULE_AUTHOR("Russell King"); +MODULE_LICENSE("GPL v2"); |